diff options
Diffstat (limited to 'package/iw/patches/001-nl80211_h_sync.patch')
-rw-r--r-- | package/iw/patches/001-nl80211_h_sync.patch | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/package/iw/patches/001-nl80211_h_sync.patch b/package/iw/patches/001-nl80211_h_sync.patch new file mode 100644 index 0000000000..1c425273a4 --- /dev/null +++ b/package/iw/patches/001-nl80211_h_sync.patch @@ -0,0 +1,251 @@ +--- a/nl80211.h ++++ b/nl80211.h +@@ -6,7 +6,7 @@ + * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2008 Michael Wu <flamingice@sourmilk.net> + * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> +- * Copyright 2008 Michael Buesch <mb@bu3sch.de> ++ * Copyright 2008 Michael Buesch <m@bues.ch> + * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> + * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> + * Copyright 2008 Colin McCabe <colin@cozybit.com> +@@ -161,6 +161,13 @@ + * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. ++ * Following attributes are provided for drivers that generate full Beacon ++ * and Probe Response frames internally: %NL80211_ATTR_SSID, ++ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, ++ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, ++ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, ++ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, ++ * %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, + * parameters are like for %NL80211_CMD_SET_BEACON. + * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it +@@ -762,6 +769,8 @@ enum nl80211_commands { + * that can be added to a scan request + * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information + * elements that can be added to a scheduled scan request ++ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be ++ * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive +@@ -842,18 +851,20 @@ enum nl80211_commands { + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating +- * that protected APs should be used. ++ * that protected APs should be used. This is also used with NEW_BEACON to ++ * indicate that the BSS is to use protection. + * +- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to +- * indicate which unicast key ciphers will be used with the connection ++ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON ++ * to indicate which unicast key ciphers will be used with the connection + * (an array of u32). +- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate +- * which group key cipher will be used with the connection (a u32). +- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate +- * which WPA version(s) the AP we want to associate with is using ++ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to ++ * indicate which group key cipher will be used with the connection (a ++ * u32). ++ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to ++ * indicate which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). +- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate +- * which key management algorithm(s) to use (an array of u32). ++ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to ++ * indicate which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. +@@ -1002,6 +1013,24 @@ enum nl80211_commands { + + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. ++ ++ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more ++ * sets of attributes to match during scheduled scans. Only BSSs ++ * that match any of the sets will be reported. These are ++ * pass-thru filter rules. ++ * For a match to succeed, the BSS must match all attributes of a ++ * set. Since not every hardware supports matching all types of ++ * attributes, there is no guarantee that the reported BSSs are ++ * fully complying with the match sets and userspace needs to be ++ * able to ignore them by itself. ++ * Thus, the implementation is somewhat hardware-dependent, but ++ * this is only an optimization and the userspace application ++ * needs to handle all the non-filtered results anyway. ++ * If the match attributes don't make sense when combined with ++ * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID ++ * is included in the probe request, but the match attributes ++ * will never let it go through), -EINVAL may be returned. ++ * If ommited, no filtering is done. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes +@@ -1014,6 +1043,33 @@ enum nl80211_commands { + * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. + * ++ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, ++ * nested array attribute containing an entry for each band, with the entry ++ * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but ++ * without the length restriction (at most %NL80211_MAX_SUPP_RATES). ++ * ++ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon ++ * and Probe Response (when response to wildcard Probe Request); see ++ * &enum nl80211_hidden_ssid, represented as a u32 ++ * ++ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. ++ * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to ++ * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the ++ * driver (or firmware) replies to Probe Request frames. ++ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association ++ * Response frames. This is used with %NL80211_CMD_NEW_BEACON and ++ * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into ++ * (Re)Association Response frames when the driver (or firmware) replies to ++ * (Re)Association Request frames. ++ * ++ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration ++ * of the station, see &enum nl80211_sta_wme_attr. ++ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working ++ * as AP. ++ * ++ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of ++ * roaming to another AP in the same ESS if the signal lever is low. ++ * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +@@ -1217,6 +1273,21 @@ enum nl80211_attrs { + NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, + NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, + ++ NL80211_ATTR_SCAN_SUPP_RATES, ++ ++ NL80211_ATTR_HIDDEN_SSID, ++ ++ NL80211_ATTR_IE_PROBE_RESP, ++ NL80211_ATTR_IE_ASSOC_RESP, ++ ++ NL80211_ATTR_STA_WME, ++ NL80211_ATTR_SUPPORT_AP_UAPSD, ++ ++ NL80211_ATTR_ROAM_SUPPORT, ++ ++ NL80211_ATTR_SCHED_SCAN_MATCH, ++ NL80211_ATTR_MAX_MATCH_SETS, ++ + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, +@@ -1426,6 +1497,8 @@ enum nl80211_sta_bss_param { + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected ++ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU ++ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +@@ -1447,6 +1520,8 @@ enum nl80211_sta_info { + NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, ++ NL80211_STA_INFO_CHAIN_SIGNAL, ++ NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -1676,6 +1751,26 @@ enum nl80211_reg_rule_attr { + }; + + /** ++ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes ++ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved ++ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, ++ * only report BSS with matching SSID. ++ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter ++ * attribute number currently defined ++ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use ++ */ ++enum nl80211_sched_scan_match_attr { ++ __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, ++ ++ NL80211_ATTR_SCHED_SCAN_MATCH_SSID, ++ ++ /* keep last */ ++ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, ++ NL80211_SCHED_SCAN_MATCH_ATTR_MAX = ++ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 ++}; ++ ++/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed +@@ -1826,6 +1921,13 @@ enum nl80211_mntr_flags { + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * ++ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between ++ * root announcements are transmitted. ++ * ++ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has ++ * access to a broader network beyond the MBSS. This is done via Root ++ * Announcement frames. ++ * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use +@@ -1847,6 +1949,8 @@ enum nl80211_meshconf_params { + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, + NL80211_MESHCONF_ELEMENT_TTL, ++ NL80211_MESHCONF_HWMP_RANN_INTERVAL, ++ NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, +@@ -2423,4 +2527,37 @@ enum nl80211_rekey_data { + MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 + }; + ++/** ++ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID ++ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in ++ * Beacon frames) ++ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element ++ * in Beacon frames ++ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID ++ * element in Beacon frames but zero out each byte in the SSID ++ */ ++enum nl80211_hidden_ssid { ++ NL80211_HIDDEN_SSID_NOT_IN_USE, ++ NL80211_HIDDEN_SSID_ZERO_LEN, ++ NL80211_HIDDEN_SSID_ZERO_CONTENTS ++}; ++ ++/** ++ * enum nl80211_sta_wme_attr - station WME attributes ++ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute ++ * @NL80211_STA_WME_QUEUES: bitmap of uapsd queues. ++ * @NL80211_STA_WME_MAX_SP: max service period. ++ * @__NL80211_STA_WME_AFTER_LAST: internal ++ * @NL80211_STA_WME_MAX: highest station WME attribute ++ */ ++enum nl80211_sta_wme_attr { ++ __NL80211_STA_WME_INVALID, ++ NL80211_STA_WME_UAPSD_QUEUES, ++ NL80211_STA_WME_MAX_SP, ++ ++ /* keep last */ ++ __NL80211_STA_WME_AFTER_LAST, ++ NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 ++}; ++ + #endif /* __LINUX_NL80211_H */ |