diff options
Diffstat (limited to 'package/d80211/src/include/net/d80211.h')
| -rw-r--r-- | package/d80211/src/include/net/d80211.h | 1064 |
1 files changed, 1064 insertions, 0 deletions
diff --git a/package/d80211/src/include/net/d80211.h b/package/d80211/src/include/net/d80211.h new file mode 100644 index 0000000000..30980e11e9 --- /dev/null +++ b/package/d80211/src/include/net/d80211.h @@ -0,0 +1,1064 @@ +/* + * Low-level hardware driver -- IEEE 802.11 driver (80211.o) interface + * Copyright 2002-2005, Devicescape Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef D80211_H +#define D80211_H + +#include <linux/kernel.h> +#include <linux/if_ether.h> +#include <linux/skbuff.h> +#include <linux/wireless.h> +#include <linux/device.h> +#include "d80211_shared.h" + +/* Note! Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be + * called in hardware interrupt context. The low-level driver must not call any + * other functions in hardware interrupt context. If there is a need for such + * call, the low-level driver should first ACK the interrupt and perform the + * IEEE 802.11 code call after this, e.g., from a scheduled tasklet (in + * software interrupt context). + */ + +/* + * Frame format used when passing frame between low-level hardware drivers + * and IEEE 802.11 driver the same as used in the wireless media, i.e., + * buffers start with IEEE 802.11 header and include the same octets that + * are sent over air. + * + * If hardware uses IEEE 802.3 headers (and perform 802.3 <-> 802.11 + * conversion in firmware), upper layer 802.11 code needs to be changed to + * support this. + * + * If the receive frame format is not the same as the real frame sent + * on the wireless media (e.g., due to padding etc.), upper layer 802.11 code + * could be updated to provide support for such format assuming this would + * optimize the performance, e.g., by removing need to re-allocation and + * copying of the data. + */ + +/* Interface version (used for compatibility verification) */ +#define IEEE80211_VERSION 2 + + +/* Channel information structure. Low-level driver is expected to fill in chan, + * freq, and val fields. Other fields will be filled in by 80211.o based on + * hostapd information and low-level driver does not need to use them. The + * limits for each channel will be provided in 'struct ieee80211_conf' when + * configuring the low-level driver with hw->config callback. */ +struct ieee80211_channel { + short chan; /* channel number (IEEE 802.11) */ + short freq; /* frequency in MHz */ + int val; /* hw specific value for the channel */ + int flag; /* flag for hostapd use (IEEE80211_CHAN_*) */ + unsigned char power_level; + unsigned char antenna_max; +}; + +struct ieee80211_rate { + int rate; /* rate in 100 kbps */ + int val; /* hw specific value for the rate */ + int flags; /* IEEE80211_RATE_ flags */ + int val2; /* hw specific value for the rate when using short preamble + * (only when IEEE80211_RATE_PREAMBLE2 flag is set, i.e., for + * 2, 5.5, and 11 Mbps) */ + signed char min_rssi_ack; + unsigned char min_rssi_ack_delta; + + /* following fields are set by 80211.o and need not be filled by the + * low-level driver */ + int rate_inv; /* inverse of the rate (LCM(all rates) / rate) for + * optimizing channel utilization estimates */ +}; + +struct ieee80211_hw_modes { + int mode; + int num_channels; + struct ieee80211_channel *channels; + int num_rates; + struct ieee80211_rate *rates; +}; + +struct ieee80211_tx_queue_params { + int aifs; /* 0 .. 255; -1 = use default */ + int cw_min; /* 2^n-1: 1, 3, 7, .. , 1023; 0 = use default */ + int cw_max; /* 2^n-1: 1, 3, 7, .. , 1023; 0 = use default */ + int burst_time; /* maximum burst time in 0.1 ms (i.e., 10 = 1 ms); + * 0 = disabled */ +}; + +#define NUM_TX_DATA_QUEUES 6 + +struct ieee80211_tx_queue_stats_data { + unsigned int len; /* num packets in queue */ + unsigned int limit; /* queue len (soft) limit */ + unsigned int count; /* total num frames sent */ +}; + +struct ieee80211_tx_queue_stats { + struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES]; +}; + +#ifndef IEEE80211_TX_QUEUE_NUMS +#define IEEE80211_TX_QUEUE_NUMS +/* TODO: these need to be synchronized with hostapd_ioctl.h; make a shared + * header file that can be included into low-level drivers, 80211.o, and + * hostapd */ +enum { + IEEE80211_TX_QUEUE_DATA0 = 0, + IEEE80211_TX_QUEUE_DATA1 = 1, + IEEE80211_TX_QUEUE_DATA2 = 2, + IEEE80211_TX_QUEUE_DATA3 = 3, + IEEE80211_TX_QUEUE_DATA4 = 4, + IEEE80211_TX_QUEUE_SVP = 5, + IEEE80211_TX_QUEUE_AFTER_BEACON = 6, + IEEE80211_TX_QUEUE_BEACON = 7 +}; +#endif /* IEEE80211_TX_QUEUE_NUMS */ + + +struct ieee80211_low_level_stats { + unsigned int dot11ACKFailureCount; + unsigned int dot11RTSFailureCount; + unsigned int dot11FCSErrorCount; + unsigned int dot11RTSSuccessCount; +}; + +/* Transmit control fields. This data structure is passed to low-level driver + * with each TX frame. The low-level driver is responsible for configuring + * the hardware to use given values (depending on what is supported). */ +#define HW_KEY_IDX_INVALID -1 + +struct ieee80211_tx_control { + enum { PKT_NORMAL = 0, PKT_PROBE_RESP } pkt_type; + int tx_rate; /* Transmit rate, given as the hw specific value for the + * rate (from struct ieee80211_rate) */ + int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw + * specific value for the rate (from + * struct ieee80211_rate) */ + +#define IEEE80211_TXCTL_REQ_TX_STATUS (1<<0)/* request TX status callback for + * this frame */ +#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without + * encryption; e.g., for EAPOL + * frames */ +#define IEEE80211_TXCTL_USE_RTS_CTS (1<<2) /* use RTS-CTS before sending + * frame */ +#define IEEE80211_TXCTL_USE_CTS_PROTECT (1<<3) /* use CTS protection for the + * frame (e.g., for combined + * 802.11g / 802.11b networks) */ +#define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to + * wait for an ack */ +#define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5) +#define IEEE80211_TXCTL_CLEAR_DST_MASK (1<<6) +#define IEEE80211_TXCTL_REQUEUE (1<<7) +#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of + * the frame */ +#define IEEE80211_TXCTL_TKIP_NEW_PHASE1_KEY (1<<9) + u32 flags; /* tx control flags defined + * above */ + u16 rts_cts_duration; /* duration field for RTS/CTS frame */ + u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. */ + u8 power_level; /* per-packet transmit power level, in dBm */ + u8 antenna_sel; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */ + s8 key_idx; /* -1 = do not encrypt, >= 0 keyidx from + * hw->set_key() */ + u8 icv_len; /* length of the ICV/MIC field in octets */ + u8 iv_len; /* length of the IV field in octets */ + u8 tkip_key[16]; /* generated phase2/phase1 key for hw TKIP */ + u8 queue; /* hardware queue to use for this frame; + * 0 = highest, hw->queues-1 = lowest */ + u8 sw_retry_attempt; /* number of times hw has tried to + * transmit frame (not incl. hw retries) */ + + int rateidx; /* internal 80211.o rateidx */ + int alt_retry_rate; /* retry rate for the last retries, given as the + * hw specific value for the rate (from + * struct ieee80211_rate). To be used to limit + * packet dropping when probing higher rates, if hw + * supports multiple retry rates. -1 = not used */ + int type; /* internal */ + int ifindex; /* internal */ +}; + +#define RX_FLAG_MMIC_ERROR 0x1 +#define RX_FLAG_DECRYPTED 0x2 + +/* Receive status. The low-level driver should provide this information + * (the subset supported by hardware) to the 802.11 code with each received + * frame. */ +struct ieee80211_rx_status { + u64 hosttime; + u64 mactime; + int freq; /* receive frequency in Mhz */ + int channel; + int phymode; + int ssi; + int signal; + int noise; + int antenna; + int rate; + int flag; +}; + +/* Transmit status. The low-level driver should provide this information + * (the subset supported by hardware) to the 802.11 code for each transmit + * frame. */ +struct ieee80211_tx_status { + /* copied ieee80211_tx_control structure */ + struct ieee80211_tx_control control; + +#define IEEE80211_TX_STATUS_TX_FILTERED (1<<0) +#define IEEE80211_TX_STATUS_ACK (1<<1) /* whether the TX frame was ACKed */ + u32 flags; /* tx staus flags defined above */ + + int ack_signal; /* measured signal strength of the ACK frame */ + int excessive_retries; + int retry_count; + + int queue_length; /* information about TX queue */ + int queue_number; +}; + + +/** + * struct ieee80211_conf - configuration of the device + * + * This struct indicates how the driver shall configure the hardware. + * + * @radio_enabled: when zero, driver is required to switch off the radio. + */ +struct ieee80211_conf { + int channel; /* IEEE 802.11 channel number */ + int freq; /* MHz */ + int channel_val; /* hw specific value for the channel */ + + int phymode; /* MODE_IEEE80211A, .. */ + unsigned int regulatory_domain; + int radio_enabled; + + int beacon_int; + +#define IEEE80211_CONF_SHORT_SLOT_TIME (1<<0) /* use IEEE 802.11g Short Slot + * Time */ +#define IEEE80211_CONF_SSID_HIDDEN (1<<1) /* do not broadcast the ssid */ + u32 flags; /* configuration flags defined above */ + + u8 power_level; /* transmit power limit for current + * regulatory domain; in dBm */ + u8 antenna_max; /* maximum antenna gain */ + short tx_power_reduction; /* in 0.1 dBm */ + + int antenna_sel; /* default antenna conf: + * 0 = default/diversity, + * 1 = Ant0, + * 2 = Ant1 */ + + int antenna_def; + int antenna_mode; + + /* Following five fields are used for IEEE 802.11H */ + unsigned int radar_detect; + unsigned int spect_mgmt; + unsigned int quiet_duration; /* duration of quiet period */ + unsigned int quiet_offset; /* how far into the beacon is the quiet + * period */ + unsigned int quiet_period; + u8 radar_firpwr_threshold; + u8 radar_rssi_threshold; + u8 pulse_height_threshold; + u8 pulse_rssi_threshold; + u8 pulse_inband_threshold; +}; + +/** + * enum ieee80211_if_types - types of 802.11 network interfaces + * + * @IEEE80211_IF_TYPE_AP: interface in AP mode. + * @IEEE80211_IF_TYPE_MGMT: special interface for communication with hostap + * daemon. Drivers should never see this type. + * @IEEE80211_IF_TYPE_STA: interface in STA (client) mode. + * @IEEE80211_IF_TYPE_IBSS: interface in IBSS (ad-hoc) mode. + * @IEEE80211_IF_TYPE_MNTR: interface in monitor (rfmon) mode. + * @IEEE80211_IF_TYPE_WDS: interface in WDS mode. + * @IEEE80211_IF_TYPE_VLAN: not used. + */ +enum ieee80211_if_types { + IEEE80211_IF_TYPE_AP = 0x00000000, + IEEE80211_IF_TYPE_MGMT = 0x00000001, + IEEE80211_IF_TYPE_STA = 0x00000002, + IEEE80211_IF_TYPE_IBSS = 0x00000003, + IEEE80211_IF_TYPE_MNTR = 0x00000004, + IEEE80211_IF_TYPE_WDS = 0x5A580211, + IEEE80211_IF_TYPE_VLAN = 0x00080211, +}; + +/** + * struct ieee80211_if_init_conf - initial configuration of an interface + * + * @if_id: internal interface ID. This number has no particular meaning to + * drivers and the only allowed usage is to pass it to + * ieee80211_beacon_get() and ieee80211_get_buffered_bc() functions. + * This field is not valid for monitor interfaces + * (interfaces of %IEEE80211_IF_TYPE_MNTR type). + * @type: one of &enum ieee80211_if_types constants. Determines the type of + * added/removed interface. + * @mac_addr: pointer to MAC address of the interface. This pointer is valid + * until the interface is removed (i.e. it cannot be used after + * remove_interface() callback was called for this interface). + * + * This structure is used in add_interface() and remove_interface() + * callbacks of &struct ieee80211_hw. + */ +struct ieee80211_if_init_conf { + int if_id; + int type; + void *mac_addr; +}; + +/** + * struct ieee80211_if_conf - configuration of an interface + * + * @type: type of the interface. This is always the same as was specified in + * &struct ieee80211_if_init_conf. The type of an interface never changes + * during the life of the interface; this field is present only for + * convenience. + * @bssid: BSSID of the network we are associated to/creating. + * @ssid: used (together with @ssid_len) by drivers for hardware that + * generate beacons independently. The pointer is valid only during the + * config_interface() call, so copy the value somewhere if you need + * it. + * @ssid_len: length of the @ssid field. + * @generic_elem: used (together with @generic_elem_len) by drivers for + * hardware that generate beacons independently. The pointer is valid + * only during the config_interface() call, so copy the value somewhere + * if you need it. + * @generic_elem_len: length of the generic element. + * @beacon: beacon template. Valid only if @host_gen_beacon_template in + * &struct ieee80211_hw is set. The driver is responsible of freeing + * the sk_buff. + * + * This structure is passed to the config_interface() callback of + * &struct ieee80211_hw. + */ +struct ieee80211_if_conf { + int type; + u8 *bssid; + u8 *ssid; + size_t ssid_len; + u8 *generic_elem; + size_t generic_elem_len; + struct sk_buff *beacon; +}; + +typedef enum { ALG_NONE, ALG_WEP, ALG_TKIP, ALG_CCMP, ALG_NULL } +ieee80211_key_alg; + + +struct ieee80211_key_conf { + + int hw_key_idx; /* filled + used by low-level driver */ + ieee80211_key_alg alg; + int keylen; + +#define IEEE80211_KEY_FORCE_SW_ENCRYPT (1<<0) /* to be cleared by low-level + driver */ +#define IEEE80211_KEY_DEFAULT_TX_KEY (1<<1) /* This key is the new default TX + key (used only for broadcast + keys). */ +#define IEEE80211_KEY_DEFAULT_WEP_ONLY (1<<2) /* static WEP is the only + configured security policy; + this allows some low-level + drivers to determine when + hwaccel can be used */ + u32 flags; /* key configuration flags defined above */ + + s8 keyidx; /* WEP key index */ + u8 key[0]; +}; + +#define IEEE80211_SCAN_START 1 +#define IEEE80211_SCAN_END 2 + +struct ieee80211_scan_conf { + int scan_channel; /* IEEE 802.11 channel number to do passive scan + * on */ + int scan_freq; /* new freq in MHz to switch to for passive scan + */ + int scan_channel_val; /* hw specific value for the channel */ + int scan_phymode; /* MODE_IEEE80211A, .. */ + unsigned char scan_power_level; + unsigned char scan_antenna_max; + + + int running_channel; /* IEEE 802.11 channel number we operate on + * normally */ + int running_freq; /* freq in MHz we're operating on normally */ + int running_channel_val; /* hw specific value for the channel */ + int running_phymode; + unsigned char running_power_level; + unsigned char running_antenna_max; + + int scan_time; /* time a scan will take in us */ + int tries; + + struct sk_buff *skb; /* skb to transmit before changing channels, maybe + * NULL for none */ + struct ieee80211_tx_control *tx_control; + +}; + +#define IEEE80211_SEQ_COUNTER_RX 0 +#define IEEE80211_SEQ_COUNTER_TX 1 + +typedef enum { + SET_KEY, DISABLE_KEY, REMOVE_ALL_KEYS, +} set_key_cmd; + +/* This is driver-visible part of the per-hw state the stack keeps. + * If you change something in here, call ieee80211_update_hw() to + * notify the stack about the change. */ +struct ieee80211_hw { + /* these are assigned by d80211, don't write */ + int index; + struct ieee80211_conf conf; + + /* Pointer to the private area that was + * allocated with this struct for you. */ + void *priv; + + /* The rest is information about your hardware */ + + struct device *dev; + + /* permanent mac address */ + u8 perm_addr[ETH_ALEN]; + + /* TODO: frame_type 802.11/802.3, sw_encryption requirements */ + + /* Some wireless LAN chipsets generate beacons in the hardware/firmware + * and others rely on host generated beacons. This option is used to + * configure the upper layer IEEE 802.11 module to generate beacons. + * The low-level driver can use ieee80211_beacon_get() to fetch the + * next beacon frame. */ +#define IEEE80211_HW_HOST_GEN_BEACON (1<<0) + + /* The device needs to be supplied with a beacon template only. */ +#define IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE (1<<1) + + /* Some devices handle decryption internally and do not + * indicate whether the frame was encrypted (unencrypted frames + * will be dropped by the hardware, unless specifically allowed + * through) */ +#define IEEE80211_HW_DEVICE_HIDES_WEP (1<<2) + + /* Whether RX frames passed to ieee80211_rx() include FCS in the end */ +#define IEEE80211_HW_RX_INCLUDES_FCS (1<<3) + + /* Some wireless LAN chipsets buffer broadcast/multicast frames for + * power saving stations in the hardware/firmware and others rely on + * the host system for such buffering. This option is used to + * configure the IEEE 802.11 upper layer to buffer broadcast/multicast + * frames when there are power saving stations so that low-level driver + * can fetch them with ieee80211_get_buffered_bc(). */ +#define IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING (1<<4) + +#define IEEE80211_HW_WEP_INCLUDE_IV (1<<5) + + /* will data nullfunc frames get proper TX status callback */ +#define IEEE80211_HW_DATA_NULLFUNC_ACK (1<<6) + + /* Force software encryption for TKIP packets if WMM is enabled. */ +#define IEEE80211_HW_NO_TKIP_WMM_HWACCEL (1<<7) + + /* Some devices handle Michael MIC internally and do not include MIC in + * the received packets passed up. device_strips_mic must be set + * for such devices. The 'encryption' frame control bit is expected to + * be still set in the IEEE 802.11 header with this option unlike with + * the device_hides_wep configuration option. + */ +#define IEEE80211_HW_DEVICE_STRIPS_MIC (1<<8) + + /* Device is capable of performing full monitor mode even during + * normal operation. */ +#define IEEE80211_HW_MONITOR_DURING_OPER (1<<9) + + /* Set if the low-level driver supports skb fraglist (NETIF_F_FRAGLIST), + * i.e. more than one skb per frame */ +#define IEEE80211_HW_FRAGLIST (1<<10) + + /* calculate Michael MIC for an MSDU when doing hwcrypto */ +#define IEEE80211_HW_TKIP_INCLUDE_MMIC (1<<12) + /* Do TKIP phase1 key mixing in stack to support cards only do + * phase2 key mixing when doing hwcrypto */ +#define IEEE80211_HW_TKIP_REQ_PHASE1_KEY (1<<13) + /* Do TKIP phase1 and phase2 key mixing in stack and send the generated + * per-packet RC4 key with each TX frame when doing hwcrypto */ +#define IEEE80211_HW_TKIP_REQ_PHASE2_KEY (1<<14) + + u32 flags; /* hardware flags defined above */ + + /* Set to the size of a needed device specific skb headroom for TX skbs. */ + unsigned int extra_tx_headroom; + + /* This is the time in us to change channels + */ + int channel_change_time; + /* This is maximum value for rssi reported by this device */ + int maxssi; + + int num_modes; + struct ieee80211_hw_modes *modes; + + /* Number of available hardware TX queues for data packets. + * WMM requires at least four queues. */ + int queues; +}; + +/* Configuration block used by the low-level driver to tell the 802.11 code + * about supported hardware features and to pass function pointers to callback + * functions. */ +struct ieee80211_ops { + /* Handler that 802.11 module calls for each transmitted frame. + * skb contains the buffer starting from the IEEE 802.11 header. + * The low-level driver should send the frame out based on + * configuration in the TX control data. */ + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control); + + /* Handler for performing hardware reset. */ + int (*reset)(struct ieee80211_hw *hw); + + /* Handler that is called when any netdevice attached to the hardware + * device is set UP for the first time. This can be used, e.g., to + * enable interrupts and beacon sending. */ + int (*open)(struct ieee80211_hw *hw); + + /* Handler that is called when the last netdevice attached to the + * hardware device is set DOWN. This can be used, e.g., to disable + * interrupts and beacon sending. */ + int (*stop)(struct ieee80211_hw *hw); + + /* Handler for asking a driver if a new interface can be added (or, + * more exactly, set UP). If the handler returns zero, the interface + * is added. Driver should perform any initialization it needs prior + * to returning zero. By returning non-zero addition of the interface + * is inhibited. Unless monitor_during_oper is set, it is guaranteed + * that monitor interfaces and normal interfaces are mutually + * exclusive. The open() handler is called after add_interface() + * if this is the first device added. At least one of the open() + * open() and add_interface() callbacks has to be assigned. If + * add_interface() is NULL, one STA interface is permitted only. */ + int (*add_interface)(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); + + /* Notify a driver that an interface is going down. The stop() handler + * is called prior to this if this is a last interface. */ + void (*remove_interface)(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); + + /* Handler for configuration requests. IEEE 802.11 code calls this + * function to change hardware configuration, e.g., channel. */ + int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + + /* Handler for configuration requests related to interfaces (e.g. + * BSSID). */ + int (*config_interface)(struct ieee80211_hw *hw, + int if_id, struct ieee80211_if_conf *conf); + + /* ieee80211 drivers do not have access to the &struct net_device + * that is (are) connected with their device. Hence (and because + * we need to combine the multicast lists and flags for multiple + * virtual interfaces), they cannot assign set_multicast_list. + * The parameters here replace dev->flags and dev->mc_count, + * dev->mc_list is replaced by calling ieee80211_get_mc_list_item. */ + void (*set_multicast_list)(struct ieee80211_hw *hw, + unsigned short flags, int mc_count); + + /* Set TIM bit handler. If the hardware/firmware takes care of beacon + * generation, IEEE 802.11 code uses this function to tell the + * low-level to set (or clear if set==0) TIM bit for the given aid. If + * host system is used to generate beacons, this handler is not used + * and low-level driver should set it to NULL. */ + int (*set_tim)(struct ieee80211_hw *hw, int aid, int set); + + /* Set encryption key. IEEE 802.11 module calls this function to set + * encryption keys. addr is ff:ff:ff:ff:ff:ff for default keys and + * station hwaddr for individual keys. aid of the station is given + * to help low-level driver in selecting which key->hw_key_idx to use + * for this key. TX control data will use the hw_key_idx selected by + * the low-level driver. */ + int (*set_key)(struct ieee80211_hw *hw, set_key_cmd cmd, + u8 *addr, struct ieee80211_key_conf *key, int aid); + + /* Set TX key index for default/broadcast keys. This is needed in cases + * where wlan card is doing full WEP/TKIP encapsulation (wep_include_iv + * is not set), in other cases, this function pointer can be set to + * NULL since the IEEE 802. 11 module takes care of selecting the key + * index for each TX frame. */ + int (*set_key_idx)(struct ieee80211_hw *hw, int idx); + + /* Enable/disable IEEE 802.1X. This item requests wlan card to pass + * unencrypted EAPOL-Key frames even when encryption is configured. + * If the wlan card does not require such a configuration, this + * function pointer can be set to NULL. */ + int (*set_ieee8021x)(struct ieee80211_hw *hw, int use_ieee8021x); + + /* Set port authorization state (IEEE 802.1X PAE) to be authorized + * (authorized=1) or unauthorized (authorized=0). This function can be + * used if the wlan hardware or low-level driver implements PAE. + * 80211.o module will anyway filter frames based on authorization + * state, so this function pointer can be NULL if low-level driver does + * not require event notification about port state changes. */ + int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr, + int authorized); + + /* Ask the hardware to do a passive scan on a new channel. The hardware + * will do what ever is required to nicely leave the current channel + * including transmit any CTS packets, etc. */ + int (*passive_scan)(struct ieee80211_hw *hw, int state, + struct ieee80211_scan_conf *conf); + + /* Ask the hardware to service the scan request, no need to start + * the scan state machine in stack. */ + int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len); + + /* return low-level statistics */ + int (*get_stats)(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats); + + /* Enable/disable test modes; mode = IEEE80211_TEST_* */ + int (*test_mode)(struct ieee80211_hw *hw, int mode); + + /* Configuration of test parameters */ + int (*test_param)(struct ieee80211_hw *hw, int param, int value); + + /* For devices that generate their own beacons and probe response + * or association responses this updates the state of privacy_invoked + * returns 0 for success or an error number */ + int (*set_privacy_invoked)(struct ieee80211_hw *hw, + int privacy_invoked); + + /* For devices that have internal sequence counters, allow 802.11 + * code to access the current value of a counter */ + int (*get_sequence_counter)(struct ieee80211_hw *hw, + u8* addr, u8 keyidx, u8 txrx, + u32* iv32, u16* iv16); + + /* Configuration of RTS threshold (if device needs it) */ + int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); + + /* Configuration of fragmentation threshold. + * Assign this if the device does fragmentation by itself, + * if this method is assigned then the stack will not do + * fragmentation. */ + int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); + + /* Configuration of retry limits (if device needs it) */ + int (*set_retry_limit)(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retr); + + /* Number of STAs in STA table notification (NULL = disabled) */ + void (*sta_table_notification)(struct ieee80211_hw *hw, + int num_sta); + + /* Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), + * bursting) for a hardware TX queue. + * queue = IEEE80211_TX_QUEUE_*. */ + int (*conf_tx)(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params); + + /* Get statistics of the current TX queue status. This is used to get + * number of currently queued packets (queue length), maximum queue + * size (limit), and total number of packets sent using each TX queue + * (count). This information is used for WMM to find out which TX + * queues have room for more packets and by hostapd to provide + * statistics about the current queueing state to external programs. */ + int (*get_tx_stats)(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats); + + /* Get the current TSF timer value from firmware/hardware. Currently, + * this is only used for IBSS mode debugging and, as such, is not a + * required function. */ + u64 (*get_tsf)(struct ieee80211_hw *hw); + + /* Reset the TSF timer and allow firmware/hardware to synchronize with + * other STAs in the IBSS. This is only used in IBSS mode. This + * function is optional if the firmware/hardware takes full care of + * TSF synchronization. */ + void (*reset_tsf)(struct ieee80211_hw *hw); + + /* Setup beacon data for IBSS beacons. Unlike access point (Master), + * IBSS uses a fixed beacon frame which is configured using this + * function. This handler is required only for IBSS mode. */ + int (*beacon_update)(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_control *control); + + /* Determine whether the last IBSS beacon was sent by us. This is + * needed only for IBSS mode and the result of this function is used to + * determine whether to reply to Probe Requests. */ + int (*tx_last_beacon)(struct ieee80211_hw *hw); +}; + +/* Allocate a new hardware device. This must be called once for each + * hardware device. The returned pointer must be used to refer to this + * device when calling other functions. 802.11 code allocates a private data + * area for the low-level driver. The size of this area is given as + * priv_data_len. + */ +struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, + struct ieee80211_ops *ops); + +/* Register hardware device to the IEEE 802.11 code and kernel. Low-level + * drivers must call this function before using any other IEEE 802.11 + * function. */ +int ieee80211_register_hw(struct ieee80211_hw *hw); + +/* driver can use this and ieee80211_get_rx_led_name to get the + * name of the registered LEDs after ieee80211_register_hw + * was called. + * This is useful to set the default trigger on the LED class + * device that your driver should export for each LED the device + * has, that way the default behaviour will be as expected but + * the user can still change it/turn off the LED etc. + */ +#ifdef CONFIG_D80211_LEDS +extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw); +#endif +static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_D80211_LEDS + return __ieee80211_get_tx_led_name(hw); +#else + return NULL; +#endif +} + +static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_D80211_LEDS + return __ieee80211_get_rx_led_name(hw); +#else + return NULL; +#endif +} + +/* Call this function if you changed the hardware description after + * ieee80211_register_hw */ +int ieee80211_update_hw(struct ieee80211_hw *hw); + +/* Unregister a hardware device. This function instructs 802.11 code to free + * allocated resources and unregister netdevices from the kernel. */ +void ieee80211_unregister_hw(struct ieee80211_hw *hw); + +/* Free everything that was allocated including private data of a driver. */ +void ieee80211_free_hw(struct ieee80211_hw *hw); + +/* Receive frame callback function. The low-level driver uses this function to + * send received frames to the IEEE 802.11 code. Receive buffer (skb) must + * start with IEEE 802.11 header. */ +void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_rx_status *status); +void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_rx_status *status); + +/* Transmit status callback function. The low-level driver must call this + * function to report transmit status for all the TX frames that had + * req_tx_status set in the transmit control fields. In addition, this should + * be called at least for all unicast frames to provide information for TX rate + * control algorithm. In order to maintain all statistics, this function is + * recommended to be called after each frame, including multicast/broadcast, is + * sent. */ +void ieee80211_tx_status(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_status *status); +void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_status *status); + +/** + * ieee80211_beacon_get - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @control: will be filled with information needed to send this beacon. + * + * If the beacon frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next beacon frame from the 802.11 code. The low-level is responsible + * for calling this function before beacon data is needed (e.g., based on + * hardware interrupt). Returned skb is used only once and low-level driver + * is responsible of freeing it. + */ +struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, + int if_id, + struct ieee80211_tx_control *control); + +/** + * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @control: will be filled with information needed to send returned frame. + * + * Function for accessing buffered broadcast and multicast frames. If + * hardware/firmware does not implement buffering of broadcast/multicast + * frames when power saving is used, 802.11 code buffers them in the host + * memory. The low-level driver uses this function to fetch next buffered + * frame. In most cases, this is used when generating beacon frame. This + * function returns a pointer to the next buffered skb or NULL if no more + * buffered frames are available. + * + * Note: buffered frames are returned only after DTIM beacon frame was + * generated with ieee80211_beacon_get() and the low-level driver must thus + * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns + * NULL if the previous generated beacon was not DTIM, so the low-level driver + * does not need to check for DTIM beacons separately and should be able to + * use common code for all beacons. + */ +struct sk_buff * +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, + struct ieee80211_tx_control *control); + +/* Low level drivers that have their own MLME and MAC indicate + * the aid for an associating station with this call */ +int ieee80211_set_aid_for_sta(struct ieee80211_hw *hw, + u8 *peer_address, u16 aid); + + +/* Given an sk_buff with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + */ +int ieee80211_get_hdrlen_from_skb(struct sk_buff *skb); + +/* Like ieee80211_get_hdrlen_from_skb() but takes a FC in CPU order. */ +int ieee80211_get_hdrlen(u16 fc); + +/* Function for net interface operation. IEEE 802.11 may use multiple kernel + * netdevices for each hardware device. The low-level driver does not "see" + * these interfaces, so it should use this function to perform netif + * operations on all interface. */ +/* This function is deprecated. */ +typedef enum { + NETIF_ATTACH, NETIF_DETACH, NETIF_START, NETIF_STOP, NETIF_WAKE, + NETIF_IS_STOPPED, NETIF_UPDATE_TX_START +} Netif_Oper; +int ieee80211_netif_oper(struct ieee80211_hw *hw, Netif_Oper op); + +/** + * ieee80211_wake_queue - wake specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_wake_queue. + */ +void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_stop_queue - stop specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_start_queues - start all queues + * @hw: pointer to as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_start_queue. + */ +void ieee80211_start_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_stop_queues - stop all queues + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_get_mc_list_item - iteration over items in multicast list + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @prev: value returned by previous call to ieee80211_get_mc_list_item() or + * NULL to start a new iteration. + * @ptr: pointer to buffer of void * type for internal usage of + * ieee80211_get_mc_list_item(). + * + * Iterates over items in multicast list of given device. To get the first + * item, pass NULL in @prev and in *@ptr. In subsequent calls, pass the + * value returned by previous call in @prev. Don't alter *@ptr during + * iteration. When there are no more items, NULL is returned. + */ +struct dev_mc_list * +ieee80211_get_mc_list_item(struct ieee80211_hw *hw, + struct dev_mc_list *prev, + void **ptr); + +/* called by driver to notify scan status completed */ +void ieee80211_scan_completed(struct ieee80211_hw *hw); + +/* Function to indicate Radar Detection. The low level driver must call this + * function to indicate the presence of radar in the current channel. + * Additionally the radar type also could be sent */ +int ieee80211_radar_status(struct ieee80211_hw *hw, int channel, + int radar, int radar_type); + +/* Test modes */ +enum { + IEEE80211_TEST_DISABLE = 0 /* terminate testing */, + IEEE80211_TEST_UNMASK_CHANNELS = 1 /* allow all channels to be used */, + IEEE80211_TEST_CONTINUOUS_TX = 2, +}; + +/* Test parameters */ +enum { + /* TX power in hardware specific raw value */ + IEEE80211_TEST_PARAM_TX_POWER_RAW = 0, + /* TX rate in hardware specific raw value */ + IEEE80211_TEST_PARAM_TX_RATE_RAW = 1, + /* Continuous TX pattern (32-bit) */ + IEEE80211_TEST_PARAM_TX_PATTERN = 2, + /* TX power in 0.1 dBm, 100 = 10 dBm */ + IEEE80211_TEST_PARAM_TX_POWER = 3, + /* TX rate in 100 kbps, 540 = 54 Mbps */ + IEEE80211_TEST_PARAM_TX_RATE = 4, + IEEE80211_TEST_PARAM_TX_ANT_SEL_RAW = 5, +}; + +/* IEEE 802.11 defines */ + +#define FCS_LEN 4 + +#define IEEE80211_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + +#define IEEE80211_FCTL_VERS 0x0003 +#define IEEE80211_FCTL_FTYPE 0x000c +#define IEEE80211_FCTL_STYPE 0x00f0 +#define IEEE80211_FCTL_TODS 0x0100 +#define IEEE80211_FCTL_FROMDS 0x0200 +#define IEEE80211_FCTL_MOREFRAGS 0x0400 +#define IEEE80211_FCTL_RETRY 0x0800 +#define IEEE80211_FCTL_PM 0x1000 +#define IEEE80211_FCTL_MOREDATA 0x2000 +#define IEEE80211_FCTL_PROTECTED 0x4000 +#define IEEE80211_FCTL_ORDER 0x8000 + +#define IEEE80211_SCTL_FRAG 0x000F +#define IEEE80211_SCTL_SEQ 0xFFF0 + +#define IEEE80211_FTYPE_MGMT 0x0000 +#define IEEE80211_FTYPE_CTL 0x0004 +#define IEEE80211_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE80211_STYPE_ASSOC_REQ 0x0000 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_REASSOC_REQ 0x0020 +#define IEEE80211_STYPE_REASSOC_RESP 0x0030 +#define IEEE80211_STYPE_PROBE_REQ 0x0040 +#define IEEE80211_STYPE_PROBE_RESP 0x0050 +#define IEEE80211_STYPE_BEACON 0x0080 +#define IEEE80211_STYPE_ATIM 0x0090 +#define IEEE80211_STYPE_DISASSOC 0x00A0 +#define IEEE80211_STYPE_AUTH 0x00B0 +#define IEEE80211_STYPE_DEAUTH 0x00C0 +#define IEEE80211_STYPE_ACTION 0x00D0 + +/* control */ +#define IEEE80211_STYPE_PSPOLL 0x00A0 +#define IEEE80211_STYPE_RTS 0x00B0 +#define IEEE80211_STYPE_CTS 0x00C0 +#define IEEE80211_STYPE_ACK 0x00D0 +#define IEEE80211_STYPE_CFEND 0x00E0 +#define IEEE80211_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE80211_STYPE_DATA 0x0000 +#define IEEE80211_STYPE_DATA_CFACK 0x0010 +#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 +#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE80211_STYPE_NULLFUNC 0x0040 +#define IEEE80211_STYPE_CFACK 0x0050 +#define IEEE80211_STYPE_CFPOLL 0x0060 +#define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 +#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 +#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 +#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 +#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 +#define IEEE80211_STYPE_QOS_CFACK 0x00D0 +#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 +#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 + + +/* miscellaneous IEEE 802.11 constants */ +#define IEEE80211_MAX_FRAG_THRESHOLD 2346 +#define IEEE80211_MAX_RTS_THRESHOLD 2347 +#define IEEE80211_MAX_AID 2007 +#define IEEE80211_MAX_TIM_LEN 251 + +struct ieee80211_hdr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; + u8 addr4[6]; +} __attribute__ ((packed)); + +/* return a pointer to the source address (SA) */ +static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) +{ + u8 *raw = (u8 *) hdr; + u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */ + + switch (tofrom) { + case 2: + return hdr->addr3; + case 3: + return hdr->addr4; + } + return hdr->addr2; +} + +/* return a pointer to the destination address (DA) */ +static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) +{ + u8 *raw = (u8 *) hdr; + u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */ + + if (to_ds) + return hdr->addr3; + return hdr->addr1; +} + +static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr) +{ + return (le16_to_cpu(hdr->frame_control) & + IEEE80211_FCTL_MOREFRAGS) != 0; +} + +#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" +#define MAC_ARG(x) ((u8*)(x))[0], ((u8*)(x))[1], ((u8*)(x))[2], \ + ((u8*)(x))[3], ((u8*)(x))[4], ((u8*)(x))[5] + +#endif /* D80211_H */ |