diff options
Diffstat (limited to 'package/boot/uboot-oxnas/files/drivers/usb/host')
-rw-r--r-- | package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c b/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c deleted file mode 100644 index 6ab05c5116..0000000000 --- a/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * drivers/usb/host/ehci-oxnas.c - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sysctl.h> -#include <asm/arch/clock.h> - -#include "ehci.h" - -static struct ehci_hcor *ghcor; - -static int start_oxnas_usb_ehci(void) -{ -#ifdef CONFIG_USB_PLLB_CLK - reset_block(SYS_CTRL_RST_PLLB, 0); - enable_clock(SYS_CTRL_CLK_REF600); - - writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV), - SEC_CTRL_PLLB_CTRL0); - /* 600MHz pllb divider for 12MHz */ - writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), SEC_CTRL_PLLB_DIV_CTRL); -#else - /* ref 300 divider for 12MHz */ - writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), SYS_CTRL_REF300_DIV); -#endif - - /* Ensure the USB block is properly reset */ - reset_block(SYS_CTRL_RST_USBHS, 1); - reset_block(SYS_CTRL_RST_USBHS, 0); - - reset_block(SYS_CTRL_RST_USBHSPHYA, 1); - reset_block(SYS_CTRL_RST_USBHSPHYA, 0); - - reset_block(SYS_CTRL_RST_USBHSPHYB, 1); - reset_block(SYS_CTRL_RST_USBHSPHYB, 0); - - /* Force the high speed clock to be generated all the time, via serial - programming of the USB HS PHY */ - writel((2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((1UL << USBHSPHY_TEST_CLK) | - (2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((1UL << USBHSPHY_TEST_CLK) | - (0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - -#ifdef CONFIG_USB_PLLB_CLK /* use pllb clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL); -#else /* use ref300 derived clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, SYS_CTRL_USB_CTRL); -#endif - /* Enable the clock to the USB block */ - enable_clock(SYS_CTRL_CLK_USBHS); - - return 0; -} -int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, - struct ehci_hcor **hcor) -{ - start_oxnas_usb_ehci(); - *hccr = (struct ehci_hccr *)(USB_HOST_BASE + 0x100); - *hcor = (struct ehci_hcor *)((uint32_t)*hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - ghcor = *hcor; - return 0; -} - -int ehci_hcd_stop(int index) -{ - reset_block(SYS_CTRL_RST_USBHS, 1); - disable_clock(SYS_CTRL_CLK_USBHS); - return 0; -} - -extern void __ehci_set_usbmode(int index); -void ehci_set_usbmode(int index) -{ - #define or_txttfill_tuning _reserved_1_[0] - u32 tmp; - - __ehci_set_usbmode(index); - - tmp = ehci_readl(&ghcor->or_txfilltuning); - tmp &= ~0x00ff0000; - tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */ - tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/ - ehci_writel(&ghcor->or_txfilltuning, tmp); - - tmp = ehci_readl(&ghcor->or_txttfill_tuning); - tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */ - ehci_writel(&ghcor->or_txttfill_tuning, tmp); -} |