diff options
Diffstat (limited to 'package/boot/uboot-oxnas/files/arch/arm')
12 files changed, 713 insertions, 0 deletions
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile new file mode 100644 index 0000000000..4c32f5cb21 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile @@ -0,0 +1,13 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += reset.o +obj-y += timer.o +obj-y += clock.o +obj-y += pinmux.o diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c new file mode 100644 index 0000000000..8974ca0296 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c @@ -0,0 +1,97 @@ +#include <common.h> +#include <asm/arch/sysctl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> + +typedef struct { + unsigned short mhz; + unsigned char refdiv; + unsigned char outdiv; + unsigned int fbdiv; + unsigned short bwadj; + unsigned short sfreq; + unsigned int sslope; +} PLL_CONFIG; + +const PLL_CONFIG C_PLL_CONFIG[] = { + { 500, 1, 2, 3932160, 119, 208, 189 }, // 500 MHz + { 525, 2, 1, 4128768, 125, 139, 297 }, // 525 MHz + { 550, 2, 1, 4325376, 131, 139, 311 }, // 550 MHz + { 575, 2, 1, 4521984, 137, 139, 326 }, // 575 MHz + { 600, 2, 1, 4718592, 143, 138, 339 }, // 600 MHz + { 625, 1, 1, 3276800, 99, 208, 157 }, // 625 MHz + { 650, 1, 1, 3407872, 103, 208, 164 }, // 650 MHz + { 675, 1, 1, 3538944, 107, 208, 170 }, // 675 MHz + { 700, 0, 0, 917504, 27, 416, 22 }, // 700 MHz + { 725, 1, 1, 3801088, 115, 208, 182 }, // 725 MHz + { 750, 0, 0, 983040, 29, 416, 23 }, // 750 MHz + { 775, 3, 0, 4063232, 123, 104, 390 }, // 775 MHz + { 800, 3, 0, 4194304, 127, 104, 403 }, // 800 MHz + { 825, 3, 0, 4325376, 131, 104, 415 }, // 825 MHz + { 850, 2, 0, 3342336, 101, 139, 241 }, // 850 MHz + { 875, 2, 0, 3440640, 104, 139, 248 }, // 875 MHz + { 900, 2, 0, 3538944, 107, 139, 255 }, // 900 MHz + { 925, 2, 0, 3637248, 110, 139, 262 }, // 925 MHz + { 950, 2, 0, 3735552, 113, 139, 269 }, // 950 MHz + { 975, 2, 0, 3833856, 116, 139, 276 }, // 975 MHz + { 1000, 2, 0, 3932160, 119, 139, 283 }, // 1000 MHz +}; + +#define PLL_BYPASS (1<<1) +#define SAT_ENABLE (1<<3) + +#define PLL_OUTDIV_SHIFT 4 +#define PLL_REFDIV_SHIFT 8 +#define PLL_BWADJ_SHIFT 16 + +#define PLL_LOW_FREQ 500 +#define PLL_FREQ_STEP 25 +static void plla_configure(int outdiv, int refdiv, int fbdiv, int bwadj, + int sfreq, int sslope) +{ + setbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); + udelay(10); + reset_block(SYS_CTRL_RST_PLLA, 1); + udelay(10); + + writel((refdiv << PLL_REFDIV_SHIFT) | (outdiv << PLL_OUTDIV_SHIFT) | + SAT_ENABLE | PLL_BYPASS, + SYS_CTRL_PLLA_CTRL0); + + writel(fbdiv, SYS_CTRL_PLLA_CTRL1); + writel((bwadj << PLL_BWADJ_SHIFT) | sfreq, SYS_CTRL_PLLA_CTRL2); + writel(sslope, SYS_CTRL_PLLA_CTRL3); + + udelay(10); // 5us delay required (from TCI datasheet), use 10us + + reset_block(SYS_CTRL_RST_PLLA, 0); + + udelay(100); // Delay for PLL to lock + + printf(" plla_ctrl0 : %08x\n", readl(SYS_CTRL_PLLA_CTRL0)); + printf(" plla_ctrl1 : %08x\n", readl(SYS_CTRL_PLLA_CTRL1)); + printf(" plla_ctrl2 : %08x\n", readl(SYS_CTRL_PLLA_CTRL2)); + printf(" plla_ctrl3 : %08x\n", readl(SYS_CTRL_PLLA_CTRL3)); + + clrbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); // Take PLL out of bypass + puts("\nPLLA Set\n"); +} + +int plla_set_config(int mhz) +{ + int index = (mhz - PLL_LOW_FREQ) / PLL_FREQ_STEP; + const PLL_CONFIG *cfg; + + if (index < 0 || index > ARRAY_SIZE(C_PLL_CONFIG)) { + debug("Freq %d MHz out of range, default to lowest\n", mhz); + index = 0; + } + cfg = &C_PLL_CONFIG[index]; + + printf("Attempting to set PLLA to %d MHz ...\n", (unsigned) cfg->mhz); + plla_configure(cfg->outdiv, cfg->refdiv, cfg->fbdiv, cfg->bwadj, + cfg->sfreq, cfg->sslope); + + return cfg->mhz; +} + diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c new file mode 100644 index 0000000000..a6f5e9abc4 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c @@ -0,0 +1,43 @@ +#include <common.h> +#include <asm/arch/pinmux.h> + +void pinmux_set(int bank, int pin, int func) +{ + u32 reg; + u32 base; + /* TODO: check parameters */ + + if (bank == PINMUX_BANK_MFA) + base = SYS_CONTROL_BASE; + else + base = SEC_CONTROL_BASE; + + clrbits_le32(base + PINMUX_SECONDARY_SEL, BIT(pin)); + clrbits_le32(base + PINMUX_TERTIARY_SEL, BIT(pin)); + clrbits_le32(base + PINMUX_QUATERNARY_SEL, BIT(pin)); + clrbits_le32(base + PINMUX_DEBUG_SEL, BIT(pin)); + clrbits_le32(base + PINMUX_ALTERNATIVE_SEL, BIT(pin)); + + switch (func) { + case PINMUX_GPIO: + default: + return; + break; + case PINMUX_2: + reg = base + PINMUX_SECONDARY_SEL; + break; + case PINMUX_3: + reg = base + PINMUX_TERTIARY_SEL; + break; + case PINMUX_4: + reg = base + PINMUX_QUATERNARY_SEL; + break; + case PINMUX_DEBUG: + reg = base + PINMUX_DEBUG_SEL; + break; + case PINMUX_ALT: + reg = base + PINMUX_ALTERNATIVE_SEL; + break; + } + setbits_le32(reg, BIT(pin)); +} diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c new file mode 100644 index 0000000000..276c912383 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c @@ -0,0 +1,91 @@ +#include <common.h> +#include <asm/arch/sysctl.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/clock.h> + +void reset_cpu(ulong addr) +{ + u32 value; + + // Assert reset to cores as per power on defaults + // Don't touch the DDR interface as things will come to an impromptu stop + // NB Possibly should be asserting reset for PLLB, but there are timing + // concerns here according to the docs + + value = + BIT(SYS_CTRL_RST_COPRO ) | + BIT(SYS_CTRL_RST_USBHS ) | + BIT(SYS_CTRL_RST_USBHSPHYA ) | + BIT(SYS_CTRL_RST_MACA ) | + BIT(SYS_CTRL_RST_PCIEA ) | + BIT(SYS_CTRL_RST_SGDMA ) | + BIT(SYS_CTRL_RST_CIPHER ) | + BIT(SYS_CTRL_RST_SATA ) | + BIT(SYS_CTRL_RST_SATA_LINK ) | + BIT(SYS_CTRL_RST_SATA_PHY ) | + BIT(SYS_CTRL_RST_PCIEPHY ) | + BIT(SYS_CTRL_RST_STATIC ) | + BIT(SYS_CTRL_RST_UART1 ) | + BIT(SYS_CTRL_RST_UART2 ) | + BIT(SYS_CTRL_RST_MISC ) | + BIT(SYS_CTRL_RST_I2S ) | + BIT(SYS_CTRL_RST_SD ) | + BIT(SYS_CTRL_RST_MACB ) | + BIT(SYS_CTRL_RST_PCIEB ) | + BIT(SYS_CTRL_RST_VIDEO ) | + BIT(SYS_CTRL_RST_USBHSPHYB ) | + BIT(SYS_CTRL_RST_USBDEV ); + + writel(value, SYS_CTRL_RST_SET_CTRL); + + // Release reset to cores as per power on defaults + writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL); + + // Disable clocks to cores as per power-on defaults - must leave DDR + // related clocks enabled otherwise we'll stop rather abruptly. + value = + BIT(SYS_CTRL_CLK_COPRO) | + BIT(SYS_CTRL_CLK_DMA) | + BIT(SYS_CTRL_CLK_CIPHER) | + BIT(SYS_CTRL_CLK_SD) | + BIT(SYS_CTRL_CLK_SATA) | + BIT(SYS_CTRL_CLK_I2S) | + BIT(SYS_CTRL_CLK_USBHS) | + BIT(SYS_CTRL_CLK_MAC) | + BIT(SYS_CTRL_CLK_PCIEA) | + BIT(SYS_CTRL_CLK_STATIC) | + BIT(SYS_CTRL_CLK_MACB) | + BIT(SYS_CTRL_CLK_PCIEB) | + BIT(SYS_CTRL_CLK_REF600) | + BIT(SYS_CTRL_CLK_USBDEV); + + writel(value, SYS_CTRL_CLK_CLR_CTRL); + + // Enable clocks to cores as per power-on defaults + + // Set sys-control pin mux'ing as per power-on defaults + + writel(0, SYS_CONTROL_BASE + PINMUX_SECONDARY_SEL); + writel(0, SYS_CONTROL_BASE + PINMUX_TERTIARY_SEL); + writel(0, SYS_CONTROL_BASE + PINMUX_QUATERNARY_SEL); + writel(0, SYS_CONTROL_BASE + PINMUX_DEBUG_SEL); + writel(0, SYS_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL); + writel(0, SYS_CONTROL_BASE + PINMUX_PULLUP_SEL); + + writel(0, SEC_CONTROL_BASE + PINMUX_SECONDARY_SEL); + writel(0, SEC_CONTROL_BASE + PINMUX_TERTIARY_SEL); + writel(0, SEC_CONTROL_BASE + PINMUX_QUATERNARY_SEL); + writel(0, SEC_CONTROL_BASE + PINMUX_DEBUG_SEL); + writel(0, SEC_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL); + writel(0, SEC_CONTROL_BASE + PINMUX_PULLUP_SEL); + + // No need to save any state, as the ROM loader can determine whether reset + // is due to power cycling or programatic action, just hit the (self- + // clearing) CPU reset bit of the block reset register + value = + BIT(SYS_CTRL_RST_SCU) | + BIT(SYS_CTRL_RST_ARM0) | + BIT(SYS_CTRL_RST_ARM1); + + writel(value, SYS_CTRL_RST_SET_CTRL); +} diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c new file mode 100644 index 0000000000..5e876080db --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c @@ -0,0 +1,129 @@ +/* + * (C) Copyright 2004 + * Texas Instruments + * Richard Woodruff <r-woodruff2@ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (1 << (CONFIG_TIMER_PRESCALE * 4))) +#define TIMER_LOAD_VAL 0xFFFFFF + +/* macro to read the 32 bit timer */ +#define READ_TIMER (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) \ + / (TIMER_CLOCK / CONFIG_SYS_HZ) + +#define READ_TIMER_HW (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) + +DECLARE_GLOBAL_DATA_PTR; + +int timer_init (void) +{ + int32_t val; + + /* Start the counter ticking up */ + writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + TIMER_LOAD); /* reload value on overflow*/ + + val = (CONFIG_TIMER_PRESCALE << TIMER_PRESCALE_SHIFT) | + (TIMER_MODE_PERIODIC << TIMER_MODE_SHIFT) | + (TIMER_ENABLE << TIMER_ENABLE_SHIFT); /* mask to enable timer*/ + writel(val, CONFIG_SYS_TIMERBASE + TIMER_CTRL); /* start timer */ + + /* reset time */ + gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */ + gd->arch.tbl = 0; /* start "advancing" time stamp */ + + return(0); +} +/* + * timer without interrupts + */ +ulong get_timer (ulong base) +{ + return get_timer_masked () - base; +} + +/* delay x useconds AND preserve advance timestamp value */ +void __udelay (unsigned long usec) +{ + ulong tmo, tmp; + + if (usec > 100000) { /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ + tmo /= 1000; /* finish normalize. */ + + tmp = get_timer (0); /* get current timestamp */ + while (get_timer (tmp) < tmo)/* loop till event */ + /*NOP*/; + } else { /* else small number, convert to hw ticks */ + tmo = usec * (TIMER_CLOCK / 1000) / 1000; + /* timeout is no more than 0.1s, and the hw timer will roll over at most once */ + tmp = READ_TIMER_HW; + while (((READ_TIMER_HW -tmp) & TIMER_LOAD_VAL) < tmo)/* loop till event */ + /*NOP*/; + } +} + +ulong get_timer_masked (void) +{ + ulong now = READ_TIMER; /* current tick value */ + + if (now >= gd->arch.lastinc) { /* normal mode (non roll) */ + /* move stamp fordward with absoulte diff ticks */ + gd->arch.tbl += (now - gd->arch.lastinc); + } else { + /* we have rollover of incrementer */ + gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ)) + - gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + return gd->arch.tbl; +} + + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ + ulong tbclk; + tbclk = CONFIG_SYS_HZ; + return tbclk; +} diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h new file mode 100644 index 0000000000..da7dd1c063 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h @@ -0,0 +1,84 @@ +#ifndef _NAS782X_CLOCK_H +#define _NAS782X_CLOCK_H + +#include <asm/arch/sysctl.h> +#include <asm/arch/cpu.h> + +/* bit numbers of clock control register */ +#define SYS_CTRL_CLK_COPRO 0 +#define SYS_CTRL_CLK_DMA 1 +#define SYS_CTRL_CLK_CIPHER 2 +#define SYS_CTRL_CLK_SD 3 +#define SYS_CTRL_CLK_SATA 4 +#define SYS_CTRL_CLK_I2S 5 +#define SYS_CTRL_CLK_USBHS 6 +#define SYS_CTRL_CLK_MACA 7 +#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA +#define SYS_CTRL_CLK_PCIEA 8 +#define SYS_CTRL_CLK_STATIC 9 +#define SYS_CTRL_CLK_MACB 10 +#define SYS_CTRL_CLK_PCIEB 11 +#define SYS_CTRL_CLK_REF600 12 +#define SYS_CTRL_CLK_USBDEV 13 +#define SYS_CTRL_CLK_DDR 14 +#define SYS_CTRL_CLK_DDRPHY 15 +#define SYS_CTRL_CLK_DDRCK 16 + +/* bit numbers of reset control register */ +#define SYS_CTRL_RST_SCU 0 +#define SYS_CTRL_RST_COPRO 1 +#define SYS_CTRL_RST_ARM0 2 +#define SYS_CTRL_RST_ARM1 3 +#define SYS_CTRL_RST_USBHS 4 +#define SYS_CTRL_RST_USBHSPHYA 5 +#define SYS_CTRL_RST_MACA 6 +#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA +#define SYS_CTRL_RST_PCIEA 7 +#define SYS_CTRL_RST_SGDMA 8 +#define SYS_CTRL_RST_CIPHER 9 +#define SYS_CTRL_RST_DDR 10 +#define SYS_CTRL_RST_SATA 11 +#define SYS_CTRL_RST_SATA_LINK 12 +#define SYS_CTRL_RST_SATA_PHY 13 +#define SYS_CTRL_RST_PCIEPHY 14 +#define SYS_CTRL_RST_STATIC 15 +#define SYS_CTRL_RST_GPIO 16 +#define SYS_CTRL_RST_UART1 17 +#define SYS_CTRL_RST_UART2 18 +#define SYS_CTRL_RST_MISC 19 +#define SYS_CTRL_RST_I2S 20 +#define SYS_CTRL_RST_SD 21 +#define SYS_CTRL_RST_MACB 22 +#define SYS_CTRL_RST_PCIEB 23 +#define SYS_CTRL_RST_VIDEO 24 +#define SYS_CTRL_RST_DDR_PHY 25 +#define SYS_CTRL_RST_USBHSPHYB 26 +#define SYS_CTRL_RST_USBDEV 27 +#define SYS_CTRL_RST_ARMDBG 29 +#define SYS_CTRL_RST_PLLA 30 +#define SYS_CTRL_RST_PLLB 31 + +static inline void reset_block(int block, int reset) +{ + u32 reg; + if (reset) + reg = SYS_CTRL_RST_SET_CTRL; + else + reg = SYS_CTRL_RST_CLR_CTRL; + + writel(BIT(block), reg); +} + +static inline void enable_clock(int block) +{ + writel(BIT(block), SYS_CTRL_CLK_SET_CTRL); +} + +static inline void disable_clock(int block) +{ + writel(BIT(block), SYS_CTRL_CLK_CLR_CTRL); +} + +int plla_set_config(int idx); + +#endif /* _NAS782X_CLOCK_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h new file mode 100644 index 0000000000..11e803c5c0 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h @@ -0,0 +1,26 @@ +#ifndef _NAS782X_CPU_H +#define _NAS782X_CPU_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#include <asm/io.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#include <asm/arch/hardware.h> +#include <asm/arch/timer.h> + +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ + +#define BIT(x) (1 << (x)) + +/* fix "implicit declaration of function" warnning */ +void *memalign(size_t alignment, size_t bytes); +void free(void* mem); +void *malloc(size_t bytes); +void *calloc(size_t n, size_t elem_size); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +#endif /* _NAS782X_CPU_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h new file mode 100644 index 0000000000..f26b17f062 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h @@ -0,0 +1,30 @@ +#ifndef _NAS782X_HARDWARE_H +#define _NAS782X_HARDWARE_H + +/* Core addresses */ +#define USB_HOST_BASE 0x40200000 +#define MACA_BASE 0x40400000 +#define MACB_BASE 0x40800000 +#define MAC_BASE MACA_BASE +#define STATIC_CS0_BASE 0x41000000 +#define STATIC_CS1_BASE 0x41400000 +#define STATIC_CONTROL_BASE 0x41C00000 +#define SATA_DATA_BASE 0x42000000 /* non-functional, DMA just needs an address */ +#define GPIO_1_BASE 0x44000000 +#define GPIO_2_BASE 0x44100000 +#define UART_1_BASE 0x44200000 +#define UART_2_BASE 0x44300000 +#define SYS_CONTROL_BASE 0x44e00000 +#define SEC_CONTROL_BASE 0x44f00000 +#define RPSA_BASE 0x44400000 +#define RPSC_BASE 0x44500000 +#define DDR_BASE 0x44700000 + +#define SATA_BASE 0x45900000 +#define SATA_0_REGS_BASE 0x45900000 +#define SATA_1_REGS_BASE 0x45910000 +#define SATA_DMA_REGS_BASE 0x459a0000 +#define SATA_SGDMA_REGS_BASE 0x459b0000 +#define SATA_HOST_REGS_BASE 0x459e0000 + +#endif /* _NAS782X_HARDWARE_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h new file mode 100644 index 0000000000..810ba5cbab --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h @@ -0,0 +1,46 @@ +#ifndef _NAS782X_PINMUX_H +#define _NAS782X_PINMUX_H + +#include <asm/arch/cpu.h> + +#define PINMUX_GPIO 0 +#define PINMUX_2 1 +#define PINMUX_3 2 +#define PINMUX_4 3 +#define PINMUX_DEBUG 4 +#define PINMUX_ALT 5 + +#define PINMUX_BANK_MFA 0 +#define PINMUX_BANK_MFB 1 + +/* System control multi-function pin function selection */ +#define PINMUX_SECONDARY_SEL 0x14 +#define PINMUX_TERTIARY_SEL 0x8c +#define PINMUX_QUATERNARY_SEL 0x94 +#define PINMUX_DEBUG_SEL 0x9c +#define PINMUX_ALTERNATIVE_SEL 0xa4 +#define PINMUX_PULLUP_SEL 0xac + +#define PINMUX_UARTA_SIN PINMUX_ALT +#define PINMUX_UARTA_SOUT PINMUX_ALT + +#define PINMUX_STATIC_DATA0 PINMUX_2 +#define PINMUX_STATIC_DATA1 PINMUX_2 +#define PINMUX_STATIC_DATA2 PINMUX_2 +#define PINMUX_STATIC_DATA3 PINMUX_2 +#define PINMUX_STATIC_DATA4 PINMUX_2 +#define PINMUX_STATIC_DATA5 PINMUX_2 +#define PINMUX_STATIC_DATA6 PINMUX_2 +#define PINMUX_STATIC_DATA7 PINMUX_2 +#define PINMUX_STATIC_NWE PINMUX_2 +#define PINMUX_STATIC_NOE PINMUX_2 +#define PINMUX_STATIC_NCS PINMUX_2 +#define PINMUX_STATIC_ADDR18 PINMUX_2 +#define PINMUX_STATIC_ADDR19 PINMUX_2 + +#define PINMUX_MACA_MDC PINMUX_2 +#define PINMUX_MACA_MDIO PINMUX_2 + +extern void pinmux_set(int bank, int pin, int func); + +#endif /* _NAS782X_PINMUX_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h new file mode 100644 index 0000000000..f73afdab4f --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h @@ -0,0 +1,6 @@ +#ifndef _NAS782X_SPL_H +#define _NAS782X_SPL_H + +#include <asm/arch/cpu.h> + +#endif /* _NAS782X_SPL_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h new file mode 100644 index 0000000000..3867e45f92 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h @@ -0,0 +1,125 @@ +#ifndef _NAS782X_SYSCTL_H +#define _NAS782X_SYSCTL_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#include <asm/arch/hardware.h> + +/** + * System block reset and clock control + */ +#define SYS_CTRL_PCI_STAT (SYS_CONTROL_BASE + 0x20) +#define SYS_CTRL_CLK_SET_CTRL (SYS_CONTROL_BASE + 0x2C) +#define SYS_CTRL_CLK_CLR_CTRL (SYS_CONTROL_BASE + 0x30) +#define SYS_CTRL_RST_SET_CTRL (SYS_CONTROL_BASE + 0x34) +#define SYS_CTRL_RST_CLR_CTRL (SYS_CONTROL_BASE + 0x38) +#define SYS_CTRL_PLLSYS_CTRL (SYS_CONTROL_BASE + 0x48) +#define SYS_CTRL_PLLSYS_KEY_CTRL (SYS_CONTROL_BASE + 0x6C) +#define SYS_CTRL_GMAC_CTRL (SYS_CONTROL_BASE + 0x78) + +/* Scratch registers */ +#define SYS_CTRL_SCRATCHWORD0 (SYS_CONTROL_BASE + 0xc4) +#define SYS_CTRL_SCRATCHWORD1 (SYS_CONTROL_BASE + 0xc8) +#define SYS_CTRL_SCRATCHWORD2 (SYS_CONTROL_BASE + 0xcc) +#define SYS_CTRL_SCRATCHWORD3 (SYS_CONTROL_BASE + 0xd0) + +#define SYS_CTRL_PLLA_CTRL0 (SYS_CONTROL_BASE + 0x1F0) +#define SYS_CTRL_PLLA_CTRL1 (SYS_CONTROL_BASE + 0x1F4) +#define SYS_CTRL_PLLA_CTRL2 (SYS_CONTROL_BASE + 0x1F8) +#define SYS_CTRL_PLLA_CTRL3 (SYS_CONTROL_BASE + 0x1FC) + +#define SYS_CTRL_GMAC_AUTOSPEED 3 +#define SYS_CTRL_GMAC_RGMII 2 +#define SYS_CTRL_GMAC_SIMPLE_MUX 1 +#define SYS_CTRL_GMAC_CKEN_GTX 0 + +#define SYS_CTRL_CKCTRL_CTRL_ADDR (SYS_CONTROL_BASE + 0x64) + +#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0 +#define SYS_CTRL_CKCTRL_SLOW_BIT 8 + + +#define SYS_CTRL_USBHSMPH_CTRL (SYS_CONTROL_BASE + 0x40) +#define SYS_CTRL_USBHSMPH_STAT (SYS_CONTROL_BASE + 0x44) +#define SYS_CTRL_REF300_DIV (SYS_CONTROL_BASE + 0xF8) +#define SYS_CTRL_USBHSPHY_CTRL (SYS_CONTROL_BASE + 0x84) +#define SYS_CTRL_USB_CTRL (SYS_CONTROL_BASE + 0x90) + +/* System control multi-function pin function selection */ +#define SYS_CTRL_SECONDARY_SEL (SYS_CONTROL_BASE + 0x14) +#define SYS_CTRL_TERTIARY_SEL (SYS_CONTROL_BASE + 0x8c) +#define SYS_CTRL_QUATERNARY_SEL (SYS_CONTROL_BASE + 0x94) +#define SYS_CTRL_DEBUG_SEL (SYS_CONTROL_BASE + 0x9c) +#define SYS_CTRL_ALTERNATIVE_SEL (SYS_CONTROL_BASE + 0xa4) +#define SYS_CTRL_PULLUP_SEL (SYS_CONTROL_BASE + 0xac) + +/* Secure control multi-function pin function selection */ +#define SEC_CTRL_SECONDARY_SEL (SEC_CONTROL_BASE + 0x14) +#define SEC_CTRL_TERTIARY_SEL (SEC_CONTROL_BASE + 0x8c) +#define SEC_CTRL_QUATERNARY_SEL (SEC_CONTROL_BASE + 0x94) +#define SEC_CTRL_DEBUG_SEL (SEC_CONTROL_BASE + 0x9c) +#define SEC_CTRL_ALTERNATIVE_SEL (SEC_CONTROL_BASE + 0xa4) +#define SEC_CTRL_PULLUP_SEL (SEC_CONTROL_BASE + 0xac) + +#define SEC_CTRL_COPRO_CTRL (SEC_CONTROL_BASE + 0x68) +#define SEC_CTRL_SECURE_CTRL (SEC_CONTROL_BASE + 0x98) +#define SEC_CTRL_LEON_DEBUG (SEC_CONTROL_BASE + 0xF0) +#define SEC_CTRL_PLLB_DIV_CTRL (SEC_CONTROL_BASE + 0xF8) +#define SEC_CTRL_PLLB_CTRL0 (SEC_CONTROL_BASE + 0x1F0) +#define SEC_CTRL_PLLB_CTRL1 (SEC_CONTROL_BASE + 0x1F4) +#define SEC_CTRL_PLLB_CTRL8 (SEC_CONTROL_BASE + 0x1F4) + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define SYS_CTRL_GMAC_AUTOSPEED 3 +#define SYS_CTRL_GMAC_RGMII 2 +#define SYS_CTRL_GMAC_SIMPLE_MUX 1 +#define SYS_CTRL_GMAC_CKEN_GTX 0 + + +#define PLLB_ENSAT 3 +#define PLLB_OUTDIV 4 +#define PLLB_REFDIV 8 +#define PLLB_DIV_INT_SHIFT 8 +#define PLLB_DIV_FRAC_SHIFT 0 +#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) +#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) + +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +#endif /* _NAS782X_SYSCTL_H */ diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h new file mode 100644 index 0000000000..ea4d71e164 --- /dev/null +++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h @@ -0,0 +1,23 @@ +#ifndef _NAS782X_TIMER_H +#define _NAS782X_TIMER_H + +#define TIMER1_BASE (RPSA_BASE + 0x200) +#define TIMER2_BASE (RPSA_BASE + 0x220) + +#define TIMER_LOAD 0 +#define TIMER_CURR 4 +#define TIMER_CTRL 8 +#define TIMER_INTR 0x0C + +#define TIMER_PRESCALE_SHIFT 2 +#define TIMER_PRESCALE_1 0 +#define TIMER_PRESCALE_16 1 +#define TIMER_PRESCALE_256 2 +#define TIMER_MODE_SHIFT 6 +#define TIMER_MODE_FREE_RUNNING 0 +#define TIMER_MODE_PERIODIC 1 +#define TIMER_ENABLE_SHIFT 7 +#define TIMER_DISABLE 0 +#define TIMER_ENABLE 1 + +#endif /* _NAS782X_TIMER_H */ |