1 files changed, 0 insertions, 65 deletions
diff --git a/package/boot/uboot-layerscape/patches/0023-drivers-usb-fsl-add-USB-ULPI-init-code.patch b/package/boot/uboot-layerscape/patches/0023-drivers-usb-fsl-add-USB-ULPI-init-code.patch
deleted file mode 100644
index 61b445de3d..0000000000
--- a/package/boot/uboot-layerscape/patches/0023-drivers-usb-fsl-add-USB-ULPI-init-code.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 271adb5c0546b080fb350a41520c600a16739f1a Mon Sep 17 00:00:00 2001
-From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
-Date: Fri, 6 May 2016 09:05:29 +0530
-Subject: [PATCH 23/93] drivers: usb: fsl: add USB ULPI init code
-
-This adds the required code to set up a ULPI USB port, for
-new NXP USB PHY used in QorIQ platforms.
-
-To use this both CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT
-have to be set in the board configuration file.
-
-Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
----
- drivers/usb/host/ehci-fsl.c |   21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
-diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
-index 97b7f14..3f06345 100644
---- a/drivers/usb/host/ehci-fsl.c
-+++ b/drivers/usb/host/ehci-fsl.c
-@@ -16,6 +16,9 @@
- #include <hwconfig.h>
- #include <fsl_usb.h>
- #include <fdt_support.h>
-+#ifdef CONFIG_USB_ULPI
-+#include <usb/ulpi.h>
-+#endif
- 
- #include "ehci.h"
- 
-@@ -50,6 +53,10 @@ int ehci_hcd_init(int index, enum usb_init_type init,
- 	const char *phy_type = NULL;
- 	size_t len;
- 	char current_usb_controller[5];
-+#ifdef CONFIG_USB_ULPI
-+	int ret;
-+	struct ulpi_viewport ulpi_vp;
-+#endif
- #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
- 	char usb_phy[5];
- 
-@@ -126,6 +133,20 @@ int ehci_hcd_init(int index, enum usb_init_type init,
- 		udelay(1000); /* delay required for PHY Clk to appear */
- 		if (!usb_phy_clk_valid(ehci))
- 			return -EINVAL;
-+
-+#ifdef CONFIG_USB_ULPI
-+		ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
-+		ulpi_vp.port_num = 0;
-+
-+		ret = ulpi_init(&ulpi_vp);
-+		if (ret) {
-+			puts("NXP ULPI viewport init failed\n");
-+			return -1;
-+		}
-+
-+		ulpi_set_vbus(&ulpi_vp, 1, 1);
-+		ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 1);
-+#endif
- 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
- 	}
- 
--- 
-1.7.9.5
-