diff options
Diffstat (limited to 'package/boot/uboot-kirkwood/patches')
16 files changed, 50 insertions, 383 deletions
diff --git a/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch b/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch deleted file mode 100644 index 5abdad9776..0000000000 --- a/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Mon, 11 Nov 2013 06:45:44 +0100 -Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files - -When diffing through the changes only the relevant changes -should be displayed. - -Signed-off-by: Luka Perkov <luka@openwrt.org> ---- - board/iomega/iconnect/kwbimage.cfg | 4 ++-- - board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++----------- - 2 files changed, 13 insertions(+), 13 deletions(-) - ---- a/board/iomega/iconnect/kwbimage.cfg -+++ b/board/iomega/iconnect/kwbimage.cfg -@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800 - # Configure RGMII-0 interface pad voltage to 1.8V - DATA 0xffd100e0 0x1b1b1b9b - --#Dram initalization for SINGLE x16 CL=5 @ 400MHz -+# Dram initalization for SINGLE x16 CL=5 @ 400MHz - DATA 0xffd01400 0x43000c30 # DDR Configuration register - # bit13-0: 0xc30, (3120 DDR2 clks refresh rate) - # bit23-14: 0x0, -@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode - # bit6-4: 0x4, CL=5 - # bit7: 0x0, TestMode=0 normal - # bit8: 0x0, DLL reset=0 normal --# bit11-9: 0x6, auto-precharge write recovery ???????????? -+# bit11-9: 0x6, auto-precharge write recovery - # bit12: 0x0, PD must be zero - # bit31-13: 0x0, required - ---- a/board/raidsonic/ib62x0/kwbimage.cfg -+++ b/board/raidsonic/ib62x0/kwbimage.cfg -@@ -11,7 +11,7 @@ - # - - # Boot Media configurations --BOOT_FROM nand # change from nand to uart if building UART image -+BOOT_FROM nand - NAND_ECC_MODE default - NAND_PAGE_SIZE 0x0800 - -@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800 - # Configure RGMII-0 interface pad voltage to 1.8V - DATA 0xffd100e0 0x1b1b1b9b - --#Dram initalization for SINGLE x16 CL=5 @ 400MHz -+# Dram initalization for SINGLE x16 CL=5 @ 400MHz - DATA 0xffd01400 0x43000c30 # DDR Configuration register - # bit13-0: 0xc30, (3120 DDR2 clks refresh rate) - # bit23-14: 0x0, --# bit24: 0x1, enable exit self refresh mode on DDR access --# bit25: 0x1, required -+# bit24: 0x1, enable exit self refresh mode on DDR access -+# bit25: 0x1, required - # bit29-26: 0x0, - # bit31-30: 0x1, - -@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address - # bit3-2: 11, Cs0size (1Gb) - # bit5-4: 00, Cs1width (x8) - # bit7-6: 11, Cs1size (1Gb) --# bit9-8: 00, Cs2width (nonexistent --# bit11-10: 00, Cs2size (nonexistent --# bit13-12: 00, Cs3width (nonexistent --# bit15-14: 00, Cs3size (nonexistent -+# bit9-8: 00, Cs2width (nonexistent) -+# bit11-10: 00, Cs2size (nonexistent) -+# bit13-12: 00, Cs3width (nonexistent) -+# bit15-14: 00, Cs3size (nonexistent) - # bit16: 0, Cs0AddrSel - # bit17: 0, Cs1AddrSel - # bit18: 0, Cs2AddrSel -@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode - # bit6-4: 0x4, CL=5 - # bit7: 0x0, TestMode=0 normal - # bit8: 0x0, DLL reset=0 normal --# bit11-9: 0x6, auto-precharge write recovery ???????????? -+# bit11-9: 0x6, auto-precharge write recovery - # bit12: 0x0, PD must be zero - # bit31-13: 0x0, required - -@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Con - DATA 0xffd01480 0x00000001 # DDR Initialization Control - # bit0: 0x1, enable DDR init upon this register write - --DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register --DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -+DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register -+DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register - - # End of Header extension - DATA 0x0 0x0 diff --git a/package/boot/uboot-kirkwood/patches/0004-kirkwood-ib62x0-add-CONFIG_SYS_GENERIC_BOARD-define.patch b/package/boot/uboot-kirkwood/patches/0001-kirkwood-ib62x0-add-CONFIG_SYS_GENERIC_BOARD-define.patch index 65ae63f346..65ae63f346 100644 --- a/package/boot/uboot-kirkwood/patches/0004-kirkwood-ib62x0-add-CONFIG_SYS_GENERIC_BOARD-define.patch +++ b/package/boot/uboot-kirkwood/patches/0001-kirkwood-ib62x0-add-CONFIG_SYS_GENERIC_BOARD-define.patch diff --git a/package/boot/uboot-kirkwood/patches/0002-kirkwood-define-empty-CONFIG_MVGBE_PORTS-by-default.patch b/package/boot/uboot-kirkwood/patches/0002-kirkwood-define-empty-CONFIG_MVGBE_PORTS-by-default.patch deleted file mode 100644 index 5b3c328e7d..0000000000 --- a/package/boot/uboot-kirkwood/patches/0002-kirkwood-define-empty-CONFIG_MVGBE_PORTS-by-default.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 292d4cf9257921912e8ea352687c977208e7553d Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Mon, 11 Nov 2013 07:27:53 +0100 -Subject: [PATCH 2/9] kirkwood: define empty CONFIG_MVGBE_PORTS by default - -Each board with defines it's own set of values. If we do not define -CONFIG_MVGBE_PORTS we will hit following error: - -mvgbe.c: In function 'mvgbe_initialize': -mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared (first use in this function) - u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; - -This patch fixes above described problem. - -Signed-off-by: Luka Perkov <luka@openwrt.org> ---- - drivers/net/mvgbe.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/net/mvgbe.c -+++ b/drivers/net/mvgbe.c -@@ -35,6 +35,10 @@ - - DECLARE_GLOBAL_DATA_PTR; - -+#ifndef CONFIG_MVGBE_PORTS -+# define CONFIG_MVGBE_PORTS {0, 0} -+#endif -+ - #define MV_PHY_ADR_REQUEST 0xee - #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) - diff --git a/package/boot/uboot-kirkwood/patches/0005-kirkwood-dockstar-add-CONFIG_SYS_GENERIC_BOARD-defin.patch b/package/boot/uboot-kirkwood/patches/0002-kirkwood-dockstar-add-CONFIG_SYS_GENERIC_BOARD-defin.patch index 6ec6052297..6ec6052297 100644 --- a/package/boot/uboot-kirkwood/patches/0005-kirkwood-dockstar-add-CONFIG_SYS_GENERIC_BOARD-defin.patch +++ b/package/boot/uboot-kirkwood/patches/0002-kirkwood-dockstar-add-CONFIG_SYS_GENERIC_BOARD-defin.patch diff --git a/package/boot/uboot-kirkwood/patches/0003-ARM-kirkwood-fix-cpu-info-for-6282-device-id.patch b/package/boot/uboot-kirkwood/patches/0003-ARM-kirkwood-fix-cpu-info-for-6282-device-id.patch deleted file mode 100644 index f92e520c7d..0000000000 --- a/package/boot/uboot-kirkwood/patches/0003-ARM-kirkwood-fix-cpu-info-for-6282-device-id.patch +++ /dev/null @@ -1,45 +0,0 @@ -From fa0ece2cc571ba1ccb9d1e0a8d337417c032576e Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Mon, 23 Dec 2013 01:23:07 +0100 -Subject: [PATCH 3/9] ARM: kirkwood: fix cpu info for 6282 device id - -Signed-off-by: Luka Perkov <luka@openwrt.org> -CC: Prafulla Wadaskar <prafulla@marvell.com> ---- - arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - ---- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c -+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c -@@ -253,7 +253,7 @@ static void kw_sysrst_check(void) - #if defined(CONFIG_DISPLAY_CPUINFO) - int print_cpuinfo(void) - { -- char *rev; -+ char *rev = "??"; - u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff; - u8 revid = readl(KW_REG_PCIE_REVID) & 0xff; - -@@ -264,7 +264,13 @@ int print_cpuinfo(void) - - switch (revid) { - case 0: -- rev = "Z0"; -+ if (devid == 0x6281) -+ rev = "Z0"; -+ else if (devid == 0x6282) -+ rev = "A0"; -+ break; -+ case 1: -+ rev = "A1"; - break; - case 2: - rev = "A0"; -@@ -273,7 +279,6 @@ int print_cpuinfo(void) - rev = "A1"; - break; - default: -- rev = "??"; - break; - } - diff --git a/package/boot/uboot-kirkwood/patches/0006-kirkwood-goflexhome-add-CONFIG_SYS_GENERIC_BOARD-def.patch b/package/boot/uboot-kirkwood/patches/0003-kirkwood-goflexhome-add-CONFIG_SYS_GENERIC_BOARD-def.patch index ac0bc0d2a4..ac0bc0d2a4 100644 --- a/package/boot/uboot-kirkwood/patches/0006-kirkwood-goflexhome-add-CONFIG_SYS_GENERIC_BOARD-def.patch +++ b/package/boot/uboot-kirkwood/patches/0003-kirkwood-goflexhome-add-CONFIG_SYS_GENERIC_BOARD-def.patch diff --git a/package/boot/uboot-kirkwood/patches/0007-kirkwood-iconnect-add-CONFIG_SYS_GENERIC_BOARD-defin.patch b/package/boot/uboot-kirkwood/patches/0004-kirkwood-iconnect-add-CONFIG_SYS_GENERIC_BOARD-defin.patch index ab23481f7c..ab23481f7c 100644 --- a/package/boot/uboot-kirkwood/patches/0007-kirkwood-iconnect-add-CONFIG_SYS_GENERIC_BOARD-defin.patch +++ b/package/boot/uboot-kirkwood/patches/0004-kirkwood-iconnect-add-CONFIG_SYS_GENERIC_BOARD-defin.patch diff --git a/package/boot/uboot-kirkwood/patches/0008-kirkwood-pogo_e02-add-CONFIG_SYS_GENERIC_BOARD-defin.patch b/package/boot/uboot-kirkwood/patches/0005-kirkwood-pogo_e02-add-CONFIG_SYS_GENERIC_BOARD-defin.patch index 40918d4737..40918d4737 100644 --- a/package/boot/uboot-kirkwood/patches/0008-kirkwood-pogo_e02-add-CONFIG_SYS_GENERIC_BOARD-defin.patch +++ b/package/boot/uboot-kirkwood/patches/0005-kirkwood-pogo_e02-add-CONFIG_SYS_GENERIC_BOARD-defin.patch diff --git a/package/boot/uboot-kirkwood/patches/0009-kirkwood-sheevaplug-add-CONFIG_SYS_GENERIC_BOARD-def.patch b/package/boot/uboot-kirkwood/patches/0006-kirkwood-sheevaplug-add-CONFIG_SYS_GENERIC_BOARD-def.patch index d976bbc02d..d976bbc02d 100644 --- a/package/boot/uboot-kirkwood/patches/0009-kirkwood-sheevaplug-add-CONFIG_SYS_GENERIC_BOARD-def.patch +++ b/package/boot/uboot-kirkwood/patches/0006-kirkwood-sheevaplug-add-CONFIG_SYS_GENERIC_BOARD-def.patch diff --git a/package/boot/uboot-kirkwood/patches/110-dockstar.patch b/package/boot/uboot-kirkwood/patches/110-dockstar.patch index 469dfcdfe4..738ccc265d 100644 --- a/package/boot/uboot-kirkwood/patches/110-dockstar.patch +++ b/package/boot/uboot-kirkwood/patches/110-dockstar.patch @@ -1,75 +1,20 @@ --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h -@@ -17,20 +17,25 @@ - /* - * Version number information - */ --#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" -+#define CONFIG_IDENT_STRING "Seagate FreeAgent DockStar" - - /* -- * High Level Configuration Options (easy to change) -+ * High Level Configuration Options - */ --#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ --#define CONFIG_KW88F6281 1 /* SOC Name */ --#define CONFIG_MACH_DOCKSTAR /* Machine type */ -+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -+#define CONFIG_KW88F6281 /* SOC Name */ - #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - - /* -+ * Machine type -+ */ -+#define CONFIG_MACH_DOCKSTAR -+ -+/* +@@ -31,6 +31,7 @@ * Commands configuration */ --#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ + #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_SYS_MVFS - #include <config_cmd_default.h> - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -@@ -38,55 +43,52 @@ #define CONFIG_CMD_NAND - #define CONFIG_CMD_PING - #define CONFIG_CMD_USB -+ /* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros +@@ -53,29 +54,29 @@ + * it has to be rounded to sector size */ - #include "mv-common.h" - --#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ --#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */ -+#undef CONFIG_SYS_PROMPT -+#define CONFIG_SYS_PROMPT "dockstar => " - - /* -- * Environment variables configurations -+ * Environment variables configuration - */ - #ifdef CONFIG_CMD_NAND --#define CONFIG_ENV_IS_IN_NAND 1 --#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_SECT_SIZE 0x20000 - #else --#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -+#define CONFIG_ENV_IS_NOWHERE - #endif --/* -- * max 4k env size is enough, but in case of nand -- * it has to be rounded to sector size -- */ --#define CONFIG_ENV_SIZE 0x20000 /* 128k */ --#define CONFIG_ENV_ADDR 0x60000 --#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ -+#define CONFIG_ENV_SIZE 0x20000 -+#define CONFIG_ENV_OFFSET 0xe0000 + #define CONFIG_ENV_SIZE 0x20000 /* 128k */ +-#define CONFIG_ENV_ADDR 0x80000 +-#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ ++#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ /* * Default environment variables @@ -81,12 +26,11 @@ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x1100000 ${initrd}; " \ - "bootm 0x800000 0x1100000" -- --#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" -+ "ubi part ubi; " \ -+ "ubi read 0x800000 kernel; " \ ++ "ubi part ubi; " \ ++ "ubi read 0x800000 kernel; " \ + "bootz 0x800000" -+ + +-#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:" \ + "0xe0000@0x0(uboot)," \ @@ -107,17 +51,4 @@ + "bootargs_root=\0" /* -- * Ethernet Driver configuration -+ * Ethernet driver configuration - */ - #ifdef CONFIG_CMD_NET - #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -@@ -102,7 +110,7 @@ - #define CONFIG_CMD_UBI - #define CONFIG_CMD_UBIFS - #define CONFIG_RBTREE --#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -+#define CONFIG_MTD_DEVICE - #define CONFIG_MTD_PARTITIONS - #define CONFIG_CMD_MTDPARTS - #define CONFIG_LZO + * Ethernet Driver configuration diff --git a/package/boot/uboot-kirkwood/patches/120-iconnect.patch b/package/boot/uboot-kirkwood/patches/120-iconnect.patch index e525ca00af..501f3f610e 100644 --- a/package/boot/uboot-kirkwood/patches/120-iconnect.patch +++ b/package/boot/uboot-kirkwood/patches/120-iconnect.patch @@ -1,6 +1,6 @@ --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h -@@ -66,30 +66,35 @@ +@@ -59,30 +59,35 @@ #define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_ENV_SIZE 0x20000 @@ -45,3 +45,13 @@ /* * Ethernet driver configuration +--- a/configs/iconnect_defconfig ++++ b/configs/iconnect_defconfig +@@ -7,6 +7,7 @@ CONFIG_SYS_PROMPT="iconnect => " + # CONFIG_CMD_FLASH is not set + CONFIG_CMD_USB=y + # CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_DHCP=y + CONFIG_CMD_MII=y + CONFIG_CMD_PING=y + CONFIG_CMD_EXT2=y diff --git a/package/boot/uboot-kirkwood/patches/130-ib62x0.patch b/package/boot/uboot-kirkwood/patches/130-ib62x0.patch index f46970ced8..baed02a01c 100644 --- a/package/boot/uboot-kirkwood/patches/130-ib62x0.patch +++ b/package/boot/uboot-kirkwood/patches/130-ib62x0.patch @@ -1,6 +1,6 @@ --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h -@@ -92,7 +92,8 @@ +@@ -74,7 +74,8 @@ "mtdparts=orion_nand:" \ "0xe0000@0x0(uboot)," \ "0x20000@0xe0000(uboot_env)," \ @@ -10,7 +10,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ -@@ -100,7 +101,7 @@ +@@ -82,7 +83,7 @@ "mtdparts="CONFIG_MTDPARTS \ "kernel=/boot/zImage\0" \ "fdt=/boot/ib62x0.dtb\0" \ diff --git a/package/boot/uboot-kirkwood/patches/140-pogoplug_e02.patch b/package/boot/uboot-kirkwood/patches/140-pogoplug_e02.patch index 40e659fca2..5eb9a12454 100644 --- a/package/boot/uboot-kirkwood/patches/140-pogoplug_e02.patch +++ b/package/boot/uboot-kirkwood/patches/140-pogoplug_e02.patch @@ -1,6 +1,6 @@ --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h -@@ -63,23 +63,35 @@ +@@ -54,23 +54,35 @@ #endif #define CONFIG_ENV_SIZE 0x20000 /* 128k */ diff --git a/package/boot/uboot-kirkwood/patches/150-goflexhome.patch b/package/boot/uboot-kirkwood/patches/150-goflexhome.patch index f9b26cfb51..7f66eb93d5 100644 --- a/package/boot/uboot-kirkwood/patches/150-goflexhome.patch +++ b/package/boot/uboot-kirkwood/patches/150-goflexhome.patch @@ -1,8 +1,6 @@ -Index: u-boot-2014.10/include/configs/goflexhome.h -=================================================================== ---- u-boot-2014.10.orig/include/configs/goflexhome.h -+++ u-boot-2014.10/include/configs/goflexhome.h -@@ -96,20 +96,18 @@ +--- a/include/configs/goflexhome.h ++++ b/include/configs/goflexhome.h +@@ -87,20 +87,18 @@ */ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ @@ -10,8 +8,8 @@ Index: u-boot-2014.10/include/configs/goflexhome.h - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" -+ "ubi part ubi; " \ -+ "ubi read 0x800000 kernel; " \ ++ "ubi part ubi; " \ ++ "ubi read 0x800000 kernel; " \ + "bootz 0x800000" #define CONFIG_MTDPARTS \ diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch index 92e2b75375..e9cca0887e 100644 --- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch +++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch @@ -1,8 +1,8 @@ ---- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig -+++ b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig -@@ -84,4 +84,7 @@ source "board/raidsonic/ib62x0/Kconfig" - source "board/Seagate/dockstar/Kconfig" - source "board/Seagate/goflexhome/Kconfig" +--- a/arch/arm/mach-kirkwood/Kconfig ++++ b/arch/arm/mach-kirkwood/Kconfig +@@ -74,4 +74,7 @@ source "board/Seagate/goflexhome/Kconfig + source "board/Seagate/nas220/Kconfig" + source "board/zyxel/nsa310s/Kconfig" +config SECOND_STAGE + bool "OpenWrt second stage hack" @@ -10,7 +10,7 @@ endif --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h -@@ -115,4 +115,6 @@ +@@ -98,4 +98,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO @@ -19,16 +19,16 @@ #endif /* _CONFIG_DOCKSTAR_H */ --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h -@@ -145,4 +145,6 @@ - #define CONFIG_MTD_PARTITIONS - #define CONFIG_CMD_MTDPARTS +@@ -114,4 +114,6 @@ + #define CONFIG_RTC_MV + #endif /* CONFIG_CMD_DATE */ +#include "openwrt-kirkwood-common.h" + #endif /* _CONFIG_IB62x0_H */ --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h -@@ -118,4 +118,6 @@ +@@ -109,4 +109,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS @@ -37,7 +37,7 @@ #endif /* _CONFIG_ICONNECT_H */ --- /dev/null +++ b/include/configs/openwrt-kirkwood-common.h -@@ -0,0 +1,52 @@ +@@ -0,0 +1,40 @@ +/* + * Copyright (C) 2013 Luka Perkov <luka@openwrt.org> + * @@ -50,15 +50,6 @@ +/* Commands */ +#define CONFIG_CMD_BOOTZ + -+#if defined(CONFIG_CMD_NET) -+#define CONFIG_CMD_DHCP -+#define CONFIG_CMD_PING -+#endif -+ -+/* Auto boot */ -+#undef CONFIG_BOOTDELAY -+#define CONFIG_BOOTDELAY 3 -+ +/* Ethernet */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_SERVERIP 192.168.1.2 @@ -72,12 +63,9 @@ +#define CONFIG_ENV_IS_NOWHERE +#endif + -+/* Flattened Device Tree */ -+#define CONFIG_OF_LIBFDT -+ +/* Flattened uImage Tree */ -+#define CONFIG_FIT -+#define CONFIG_FIT_VERBOSE ++#define CONFIG_FIT 1 ++#define CONFIG_FIT_VERBOSE 1 + +/* Various */ +#define CONFIG_BZIP2 @@ -92,7 +80,7 @@ +#endif /* __OPENWRT_KIRKWOOD_COMMON_H */ --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h -@@ -115,4 +115,6 @@ +@@ -104,4 +104,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO @@ -101,16 +89,16 @@ #endif /* _CONFIG_POGO_E02_H */ --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h -@@ -143,4 +143,6 @@ - #define CONFIG_CMD_MTDPARTS - #define CONFIG_LZO +@@ -109,4 +109,6 @@ + #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET + #endif /* CONFIG_CMD_IDE */ +#include "openwrt-kirkwood-common.h" + #endif /* _CONFIG_SHEEVAPLUG_H */ --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h -@@ -133,4 +133,6 @@ +@@ -122,4 +122,6 @@ #define CONFIG_RTC_MV #endif /* CONFIG_CMD_DATE */ diff --git a/package/boot/uboot-kirkwood/patches/400-gcc-5-compiler.patch b/package/boot/uboot-kirkwood/patches/400-gcc-5-compiler.patch deleted file mode 100644 index 8724927402..0000000000 --- a/package/boot/uboot-kirkwood/patches/400-gcc-5-compiler.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Hans de Goede <hdegoede@redhat.com> -Date: Sat, 7 Feb 2015 21:52:40 +0000 (+0100) -Subject: Add linux/compiler-gcc5.h to fix builds with gcc5 -X-Git-Tag: v2015.04-rc2~31 -X-Git-Url: http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=478b02f1a7043b673565075ea5016376f3293b23 - -Add linux/compiler-gcc5.h to fix builds with gcc5 - -Add linux/compiler-gcc5/h from the kernel sources at: - -commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b -Author: Steven Noonan <steven@uplinklabs.net> -Date: Sat Oct 25 15:09:42 2014 -0700 - - compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - ---- /dev/null -+++ b/include/linux/compiler-gcc5.h -@@ -0,0 +1,65 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ Early snapshots of gcc 4.3 don't support this and we can't detect this -+ in the preprocessor, but we can live with this because they're unreleased. -+ Maketime probing would be overkill here. -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ |