1 files changed, 0 insertions, 96 deletions
diff --git a/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch b/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch
deleted file mode 100644
index 5abdad9776..0000000000
--- a/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Mon, 11 Nov 2013 06:45:44 +0100
-Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files
-
-When diffing through the changes only the relevant changes
-should be displayed.
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
----
- board/iomega/iconnect/kwbimage.cfg  |  4 ++--
- board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++-----------
- 2 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/board/iomega/iconnect/kwbimage.cfg
-+++ b/board/iomega/iconnect/kwbimage.cfg
-@@ -20,7 +20,7 @@ NAND_PAGE_SIZE	0x0800
- # Configure RGMII-0 interface pad voltage to 1.8V
- DATA 0xffd100e0 0x1b1b1b9b
- 
--#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
- DATA 0xffd01400 0x43000c30	# DDR Configuration register
- # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
- # bit23-14: 0x0,
-@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
- # bit6-4:   0x4, CL=5
- # bit7:     0x0, TestMode=0 normal
- # bit8:     0x0, DLL reset=0 normal
--# bit11-9:  0x6, auto-precharge write recovery ????????????
-+# bit11-9:  0x6, auto-precharge write recovery
- # bit12:    0x0, PD must be zero
- # bit31-13: 0x0, required
- 
---- a/board/raidsonic/ib62x0/kwbimage.cfg
-+++ b/board/raidsonic/ib62x0/kwbimage.cfg
-@@ -11,7 +11,7 @@
- #
- 
- # Boot Media configurations
--BOOT_FROM	nand	# change from nand to uart if building UART image
-+BOOT_FROM	nand
- NAND_ECC_MODE	default
- NAND_PAGE_SIZE	0x0800
- 
-@@ -21,12 +21,12 @@ NAND_PAGE_SIZE	0x0800
- # Configure RGMII-0 interface pad voltage to 1.8V
- DATA 0xffd100e0 0x1b1b1b9b
- 
--#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
- DATA 0xffd01400 0x43000c30	# DDR Configuration register
- # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
- # bit23-14: 0x0,
--# bit24:    0x1,     enable exit self refresh mode on DDR access
--# bit25:    0x1,     required
-+# bit24:    0x1,   enable exit self refresh mode on DDR access
-+# bit25:    0x1,   required
- # bit29-26: 0x0,
- # bit31-30: 0x1,
- 
-@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c	# DDR Address
- # bit3-2:   11,  Cs0size (1Gb)
- # bit5-4:   00,  Cs1width (x8)
- # bit7-6:   11,  Cs1size (1Gb)
--# bit9-8:   00,  Cs2width (nonexistent
--# bit11-10: 00,  Cs2size  (nonexistent
--# bit13-12: 00,  Cs3width (nonexistent
--# bit15-14: 00,  Cs3size  (nonexistent
-+# bit9-8:   00,  Cs2width (nonexistent)
-+# bit11-10: 00,  Cs2size (nonexistent)
-+# bit13-12: 00,  Cs3width (nonexistent)
-+# bit15-14: 00,  Cs3size (nonexistent)
- # bit16:    0,   Cs0AddrSel
- # bit17:    0,   Cs1AddrSel
- # bit18:    0,   Cs2AddrSel
-@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
- # bit6-4:   0x4, CL=5
- # bit7:     0x0, TestMode=0 normal
- # bit8:     0x0, DLL reset=0 normal
--# bit11-9:  0x6, auto-precharge write recovery ????????????
-+# bit11-9:  0x6, auto-precharge write recovery
- # bit12:    0x0, PD must be zero
- # bit31-13: 0x0, required
- 
-@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803	# CPU ODT Con
- DATA 0xffd01480 0x00000001	# DDR Initialization Control
- # bit0: 0x1, enable DDR init upon this register write
- 
--DATA 0xFFD20134 0x66666666      # L2 RAM Timing 0 Register
--DATA 0xFFD20138 0x66666666      # L2 RAM Timing 1 Register
-+DATA 0xffd20134 0x66666666	# L2 RAM Timing 0 Register
-+DATA 0xffd20138 0x66666666	# L2 RAM Timing 1 Register
- 
- # End of Header extension
- DATA 0x0 0x0