diff options
Diffstat (limited to 'package/base-files/brcm-2.4/etc')
| -rw-r--r-- | package/base-files/brcm-2.4/etc/hotplug.d/net/09-net | 45 | ||||
| -rwxr-xr-x | package/base-files/brcm-2.4/etc/init.d/S05netconfig | 70 |
2 files changed, 20 insertions, 95 deletions
diff --git a/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net b/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net deleted file mode 100644 index 48abdf4062..0000000000 --- a/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -setup_wl() -{ - [ -f /proc/net/wl0 ] && { - lsmod | grep wlcompat >&- || insmod wlcompat - } - iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && { - /sbin/wifi - } -} -setup_eth() -{ - [ -d /proc/switch ] || { - insmod switch-core - insmod switch-robo || insmod switch-adm - } - if="$(echo "$INTERFACE" | sed s,eth,et,)" - ifconfig "$INTERFACE" up 2>&- >&- - [ -d "/proc/switch/$INTERFACE" ] || return 0 - echo "1" > "/proc/switch/$INTERFACE/reset" - echo "1" > "/proc/switch/$INTERFACE/enable_vlan" - for vlan in $(seq 0 15); do - eval "hwname=\"\${vlan${vlan}hwname}\"" - [ "$hwname" = "$if" ] && { - eval "vports=\"\${vlan${vlan}ports}\"" - [ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports" - $DEBUG vconfig add "$INTERFACE" "$vlan" - } - done -} - -do_register() -{ - case "${INTERFACE%%[0-9]*}" in - eth) setup_eth;; - wl) setup_wl;; - esac -} - - -case "$ACTION" in - add|register) do_register;; -esac diff --git a/package/base-files/brcm-2.4/etc/init.d/S05netconfig b/package/base-files/brcm-2.4/etc/init.d/S05netconfig index 0f53c0c9c9..82e4ab9986 100755 --- a/package/base-files/brcm-2.4/etc/init.d/S05netconfig +++ b/package/base-files/brcm-2.4/etc/init.d/S05netconfig @@ -13,16 +13,16 @@ mkdir -p /etc/config strings /dev/mtdblock/3 fi ) | awk ' -function p(name) { - if (c[name] != "") print name "=\"" c[name] "\"" +function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" } BEGIN { FS="=" c["lan_ifname"]="br0" - c["lan_ifnames"]="vlan0 eth1" + c["lan_ifnames"]="eth0.0 wl0" c["wan_proto"]="none" - c["wan_ifname"]="vlan1" + c["wan_ifname"]="eth0.1" c["vlan0ports"]="1 2 3 4 5*" c["vlan1ports"]="0 5" } @@ -34,23 +34,16 @@ BEGIN { END { # v1 hardware if (nvram["boardtype"] == "bcm94710dev") { - # Linksys WRT54G v1.x - if (nvram["boardnum"] == "42") { - c["vlan0ports"]="" - c["vlan1ports"]="" - c["lan_ifnames"]="vlan2 eth2" - } - # Asus WL-500g if (nvram["boardnum"] == "asusX") { - c["lan_ifnames"]="eth0 eth1 eth2" # FIXME - # wan_ifname=eth1 + c["lan_ifnames"]="eth0 eth1 wl0" # FIXME + c["wan_ifname"]="" } } if (nvram["boardtype"] == "wgt634u") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" - c["lan_ifnames"] = "vlan0 ath0" + c["lan_ifnames"] = "eth0.0 ath0" } if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { c["vlan0ports"] = "0 1 2 3 5*" @@ -60,51 +53,28 @@ END { # WAP54G if ((nvram["boardnum"] == "2") || \ (nvram["boardnum"] == "1024")) { - c["lan_ifnames"]="eth0 eth1" + c["lan_ifnames"]="eth0 wl0" c["wan_ifname"]="" } print "#### VLAN configuration " - print "vlan0hwname=et0" - print "vlan1hwname=et0" - p("vlan0ports") - p("vlan1ports") + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") print "" print "" - print "#### LAN configuration" - print "lan_proto=\"static\"" - p("lan_ifname") - p("lan_ifnames") - print "lan_ipaddr=\"192.168.1.1\"" - print "lan_netmask=\"255.255.255.0\"" - print "# lan_dns=\"192.168.1.1\"" - print "# lan_gateway=\"192.168.1.1\"" - + print "config interface lan" + print " option type bridge" + p("ifnames", "lan_ifnames") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" print "" print "" - print "#### WAN configuration" - print "# wan_proto: WAN protocol, available protocols:" - print "# none: disable" - print "# dhcp: DHCP" - print "# static: Static IP" - print "# pppoe: PPP over Ethernet" - print "# pptp: Point-to-Point tunneling Protocol" - print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" - print "" - print "wan_proto=dhcp" - p("wan_ifname") - print "wan_device=\"" c["wan_ifname"] "\"" - print "# wan_ipaddr=\"192.168.0.2\"" - print "# wan_netmask=\"255.255.255.0\"" - print "# wan_gateway=\"192.168.0.1\"" - print "# wan_dns=\"192.168.0.1\"" - print "" - print "## PPP over Ethernet and PPTP" - print "# wan_ifname=\"ppp0\"" - print "# ppp_username=\"my_username\"" - print "# ppp_passwd=\"my_password\"" - print "# pptp_server_ip=\"192.168.0.1\"" + print "config interface wan" + p("ifname", "wan_ifname") + print " option proto dhcp" } ' > /etc/config/network |