aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/bcm53xx/config-4.3318
-rw-r--r--target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Kconfig (renamed from target/linux/bcm53xx/files/drivers/firmware/broadcom/Kconfig)0
-rw-r--r--target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Makefile (renamed from target/linux/bcm53xx/files/drivers/firmware/broadcom/Makefile)0
-rw-r--r--target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/bcm47xx_nvram.c (renamed from target/linux/bcm53xx/files/drivers/firmware/broadcom/bcm47xx_nvram.c)0
-rw-r--r--target/linux/bcm53xx/files-4.1/include/linux/bcm47xx_nvram.h (renamed from target/linux/bcm53xx/files/include/linux/bcm47xx_nvram.h)0
-rw-r--r--target/linux/bcm53xx/patches-4.3/067-ARM-BCM5301X-add-NAND-flash-chip-description-for-Asu.patch32
-rw-r--r--target/linux/bcm53xx/patches-4.3/082-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch128
-rw-r--r--target/linux/bcm53xx/patches-4.3/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch218
-rw-r--r--target/linux/bcm53xx/patches-4.3/101-use-part-parser.patch11
-rw-r--r--target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.3/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch635
-rw-r--r--target/linux/bcm53xx/patches-4.3/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch50
-rw-r--r--target/linux/bcm53xx/patches-4.3/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch63
-rw-r--r--target/linux/bcm53xx/patches-4.3/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch135
-rw-r--r--target/linux/bcm53xx/patches-4.3/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch75
-rw-r--r--target/linux/bcm53xx/patches-4.3/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch104
-rw-r--r--target/linux/bcm53xx/patches-4.3/197-USB-bcma-add-USB-3.0-support.patch295
-rw-r--r--target/linux/bcm53xx/patches-4.3/198-USB-bcma-fix-setting-VCC-GPIO-value.patch54
-rw-r--r--target/linux/bcm53xx/patches-4.3/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch86
-rw-r--r--target/linux/bcm53xx/patches-4.3/301-ARM-BCM5301X-Add-SPROM.patch26
-rw-r--r--target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.3/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch41
-rw-r--r--target/linux/bcm53xx/patches-4.3/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch63
-rw-r--r--target/linux/bcm53xx/patches-4.3/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch170
-rw-r--r--target/linux/bcm53xx/patches-4.3/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch173
-rw-r--r--target/linux/bcm53xx/patches-4.3/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.3/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch111
-rw-r--r--target/linux/bcm53xx/patches-4.3/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.3/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.3/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.3/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch35
-rw-r--r--target/linux/bcm53xx/patches-4.3/800-bcma-use-two-different-initcalls-if-built-in.patch65
-rw-r--r--target/linux/bcm53xx/patches-4.3/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch42
33 files changed, 3198 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/config-4.3 b/target/linux/bcm53xx/config-4.3
new file mode 100644
index 0000000000..73c8062fa9
--- /dev/null
+++ b/target/linux/bcm53xx/config-4.3
@@ -0,0 +1,318 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BCM=y
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_281XX is not set
+CONFIG_ARCH_BCM_5301X=y
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BCM_CYGNUS is not set
+CONFIG_ARCH_BCM_IPROC=y
+# CONFIG_ARCH_BRCMSTB is not set
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_B53=y
+# CONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_B53_PHY_DRIVER is not set
+CONFIG_B53_SRAB_DRIVER=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BGMAC=y
+CONFIG_BOUNCE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_JITTERENTROPY is not set
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BCM_5301X=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=0
+CONFIG_DEBUG_UART_PHYS=0x18000300
+CONFIG_DEBUG_UART_VIRT=0xf1000300
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BRCMNAND=y
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_BCMA=y
+# CONFIG_PCIE_IPROC_PLATFORM is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+# CONFIG_PL310_ERRATA_588369 is not set
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BCM53XX=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SRCU=y
+CONFIG_STOP_MACHINE=y
+# CONFIG_SUNXI_SRAM is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SWP_EMULATE=y
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/files/drivers/firmware/broadcom/Kconfig b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Kconfig
index 6bed119930..6bed119930 100644
--- a/target/linux/bcm53xx/files/drivers/firmware/broadcom/Kconfig
+++ b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Kconfig
diff --git a/target/linux/bcm53xx/files/drivers/firmware/broadcom/Makefile b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Makefile
index d0e683583c..d0e683583c 100644
--- a/target/linux/bcm53xx/files/drivers/firmware/broadcom/Makefile
+++ b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Makefile
diff --git a/target/linux/bcm53xx/files/drivers/firmware/broadcom/bcm47xx_nvram.c b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/bcm47xx_nvram.c
index 87add3fdce..87add3fdce 100644
--- a/target/linux/bcm53xx/files/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/bcm47xx_nvram.c
diff --git a/target/linux/bcm53xx/files/include/linux/bcm47xx_nvram.h b/target/linux/bcm53xx/files-4.1/include/linux/bcm47xx_nvram.h
index 2793652fbf..2793652fbf 100644
--- a/target/linux/bcm53xx/files/include/linux/bcm47xx_nvram.h
+++ b/target/linux/bcm53xx/files-4.1/include/linux/bcm47xx_nvram.h
diff --git a/target/linux/bcm53xx/patches-4.3/067-ARM-BCM5301X-add-NAND-flash-chip-description-for-Asu.patch b/target/linux/bcm53xx/patches-4.3/067-ARM-BCM5301X-add-NAND-flash-chip-description-for-Asu.patch
new file mode 100644
index 0000000000..ccb8e2769f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/067-ARM-BCM5301X-add-NAND-flash-chip-description-for-Asu.patch
@@ -0,0 +1,32 @@
+From af8fe7176ec13de08b1bfb7ea2ae9cc147b2429a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 12 Sep 2015 12:56:37 +0200
+Subject: [PATCH] ARM: BCM5301X: add NAND flash chip description for Asus
+ RT-AC87U
+
+The NAND flash chip description were not imported for the Asus RT-AC87U
+dts file when this was done for all the other dts files, because these
+patches were send in parallel.
+
+This adds a missing NAND flash chip description to this patch:
+commit 9faa5960eef3204cae6637b530f5e23e53b5a9ef
+Author: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri May 29 23:39:47 2015 +0200
+
+ARM: BCM5301X: add NAND flash chip description
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -10,6 +10,7 @@
+ /dts-v1/;
+
+ #include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+ compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
diff --git a/target/linux/bcm53xx/patches-4.3/082-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch b/target/linux/bcm53xx/patches-4.3/082-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch
new file mode 100644
index 0000000000..044fb80607
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/082-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch
@@ -0,0 +1,128 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 26 Aug 2015 16:11:38 +0200
+Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7000
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
++ bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r8000.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -0,0 +1,106 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Netgear R7000
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
++ model = "Netgear R7000";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ power-white {
++ label = "bcm53xx:white:power";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++
++ power-amber {
++ label = "bcm53xx:amber:power";
++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ 5ghz {
++ label = "bcm53xx:white:5ghz";
++ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ 2ghz {
++ label = "bcm53xx:white:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ wps {
++ label = "bcm53xx:white:wps";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ wireless {
++ label = "bcm53xx:white:wireless";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb3 {
++ label = "bcm53xx:white:usb3";
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb2 {
++ label = "bcm53xx:white:usb2";
++ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
++ };
++
++ rfkill {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.3/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch b/target/linux/bcm53xx/patches-4.3/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
new file mode 100644
index 0000000000..0dae7c9144
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
@@ -0,0 +1,218 @@
+From a0aef7fbab0d8b5a0d445c74990e5233beda246e Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Wed, 21 Oct 2015 18:46:04 -0400
+Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
+
+Add device tree files for Broadcom Northstar based SVKs. Since the
+bcm5301x.dtsi already exists, all that is necessary is the dts files to
+enable the UARTs. With these files, the SVKs are able to boot to shell.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/Makefile | 5 +++-
+ arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 179 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm94708.dts
+ create mode 100644 arch/arm/boot/dts/bcm94709.dts
+ create mode 100644 arch/arm/boot/dts/bcm953012k.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -73,7 +73,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
+- bcm4709-netgear-r8000.dtb
++ bcm4709-netgear-r8000.dtb \
++ bcm94708.dtb \
++ bcm94709.dtb \
++ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94708.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94708)";
++ compatible = "brcm,bcm94708", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94709.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94709)";
++ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm953012k.dts
+@@ -0,0 +1,63 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM953012K)";
++ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart1;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x10000000>;
++ };
++};
++
++&uart0 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
++
++&uart1 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.3/101-use-part-parser.patch b/target/linux/bcm53xx/patches-4.3/101-use-part-parser.patch
new file mode 100644
index 0000000000..8d48673c6d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/101-use-part-parser.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+@@ -19,6 +19,8 @@
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
++
++ linux,part-probe = "ofpart", "bcm47xxpart";
+ };
+ };
+ };
diff --git a/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch
new file mode 100644
index 0000000000..70ab03995c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch
@@ -0,0 +1,69 @@
+From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 4 May 2014 13:19:20 +0200
+Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
+
+This driver needs an nvram driver and fetches the sprom values from the
+nvram and provides it to any other driver. The calibration data for the
+wifi chip the mac address and some more board description data is
+stores in the sprom.
+
+This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
+make the bcm47xx MIPS SoCs also use this driver some time later.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ .../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 +
+ drivers/misc/Kconfig | 11 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++
+ 4 files changed, 718 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+ create mode 100644 drivers/misc/bcm47xx-sprom.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+@@ -0,0 +1,16 @@
++Broadcom bcm47xx/bcm53xx sprom converter
++
++This driver provbides an sprom based on a given nvram.
++
++Required properties:
++
++- compatible : brcm,bcm47xx-sprom
++
++- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
++
++Example:
++
++sprom0: sprom@0 {
++ compatible = "brcm,bcm47xx-sprom";
++ nvram = <&nvram0>;
++};
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -525,6 +525,17 @@ config VEXPRESS_SYSCFG
+ bus. System Configuration interface is one of the possible means
+ of generating transactions on this bus.
+
++config BCM47XX_SPROM
++ tristate "BCM47XX sprom driver"
++ help
++ This driver parses the sprom from a given nvram which is found on
++ Broadcom bcm47xx and bcm53xx SoCs.
++
++ The sprom contains board configuration data like the
++ calibration data fro the wifi chips, the mac addresses used
++ by the board and many other board configuration data. This
++ driver will provide the sprom to bcma.
++
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
+ source "drivers/misc/cb710/Kconfig"
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/
+ obj-$(CONFIG_ECHO) += echo/
+ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
+ obj-$(CONFIG_CXL_BASE) += cxl/
++obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx-sprom.o
diff --git a/target/linux/bcm53xx/patches-4.3/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.3/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
new file mode 100644
index 0000000000..5e3bd7793d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
@@ -0,0 +1,635 @@
+From a0ad1511d5805b95ac4c454d7904c670a1696055 Mon Sep 17 00:00:00 2001
+From: Kapil Hali <kapilh@broadcom.com>
+Date: Wed, 14 Oct 2015 13:47:00 -0400
+Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom NSP
+
+Add SMP support for Broadcom's Northstar Plus SoC,
+cpu enable method and pen_release procedures. This
+changes also consolidates iProc family's - BCM NSP
+and BCM Kona, SMP handling in a common file.
+
+Northstar Plus SoC is based on ARM Cortex-A9
+revision r3p0 which requires configuration for ARM
+Errata 764369 for SMP. This change adds the needed
+configuration option.
+
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ arch/arm/mach-bcm/Makefile | 2 +-
+ arch/arm/mach-bcm/bcm_nsp.h | 19 +++
+ arch/arm/mach-bcm/headsmp.S | 37 +++++
+ arch/arm/mach-bcm/kona_smp.c | 202 ---------------------------
+ arch/arm/mach-bcm/platsmp.c | 326 +++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 383 insertions(+), 203 deletions(-)
+ create mode 100644 arch/arm/mach-bcm/bcm_nsp.h
+ create mode 100644 arch/arm/mach-bcm/headsmp.S
+ delete mode 100644 arch/arm/mach-bcm/kona_smp.c
+ create mode 100644 arch/arm/mach-bcm/platsmp.c
+
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bc
+ obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
+
+ # BCM281XX and BCM21664 SMP support
+-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
++obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
+
+ # BCM281XX and BCM21664 L2 cache control
+ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
+--- /dev/null
++++ b/arch/arm/mach-bcm/bcm_nsp.h
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __BCM_NSP_H
++#define __BCM_NSP_H
++
++extern void nsp_secondary_startup(void);
++
++#endif /* __BCM_NSP_H */
+--- /dev/null
++++ b/arch/arm/mach-bcm/headsmp.S
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/linkage.h>
++
++/*
++ * iProc specific entry point for secondary CPUs. This provides
++ * a "holding pen" into which all secondary cores are held until
++ * we are ready for them to initialise.
++ */
++ENTRY(nsp_secondary_startup)
++ mrc p15, 0, r0, c0, c0, 5
++ and r0, r0, #15
++ adr r4, 1f
++ ldmia r4, {r5, r6}
++ sub r4, r4, r5
++ add r6, r6, r4
++pen: ldr r7, [r6]
++ cmp r7, r0
++ bne pen
++
++ b secondary_startup
++
++1: .long .
++ .long pen_release
++
++ENDPROC(nsp_secondary_startup)
+--- a/arch/arm/mach-bcm/kona_smp.c
++++ /dev/null
+@@ -1,202 +0,0 @@
+-/*
+- * Copyright (C) 2014 Broadcom Corporation
+- * Copyright 2014 Linaro Limited
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation version 2.
+- *
+- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+- * kind, whether express or implied; without even the implied warranty
+- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- * GNU General Public License for more details.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/errno.h>
+-#include <linux/io.h>
+-#include <linux/of.h>
+-#include <linux/sched.h>
+-
+-#include <asm/smp.h>
+-#include <asm/smp_plat.h>
+-#include <asm/smp_scu.h>
+-
+-/* Size of mapped Cortex A9 SCU address space */
+-#define CORTEX_A9_SCU_SIZE 0x58
+-
+-#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
+-#define BOOT_ADDR_CPUID_MASK 0x3
+-
+-/* Name of device node property defining secondary boot register location */
+-#define OF_SECONDARY_BOOT "secondary-boot-reg"
+-
+-/* I/O address of register used to coordinate secondary core startup */
+-static u32 secondary_boot;
+-
+-/*
+- * Enable the Cortex A9 Snoop Control Unit
+- *
+- * By the time this is called we already know there are multiple
+- * cores present. We assume we're running on a Cortex A9 processor,
+- * so any trouble getting the base address register or getting the
+- * SCU base is a problem.
+- *
+- * Return 0 if successful or an error code otherwise.
+- */
+-static int __init scu_a9_enable(void)
+-{
+- unsigned long config_base;
+- void __iomem *scu_base;
+-
+- if (!scu_a9_has_base()) {
+- pr_err("no configuration base address register!\n");
+- return -ENXIO;
+- }
+-
+- /* Config base address register value is zero for uniprocessor */
+- config_base = scu_a9_get_base();
+- if (!config_base) {
+- pr_err("hardware reports only one core\n");
+- return -ENOENT;
+- }
+-
+- scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+- if (!scu_base) {
+- pr_err("failed to remap config base (%lu/%u) for SCU\n",
+- config_base, CORTEX_A9_SCU_SIZE);
+- return -ENOMEM;
+- }
+-
+- scu_enable(scu_base);
+-
+- iounmap(scu_base); /* That's the last we'll need of this */
+-
+- return 0;
+-}
+-
+-static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+-{
+- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+- struct device_node *node;
+- int ret;
+-
+- BUG_ON(secondary_boot); /* We're called only once */
+-
+- /*
+- * This function is only called via smp_ops->smp_prepare_cpu().
+- * That only happens if a "/cpus" device tree node exists
+- * and has an "enable-method" property that selects the SMP
+- * operations defined herein.
+- */
+- node = of_find_node_by_path("/cpus");
+- BUG_ON(!node);
+-
+- /*
+- * Our secondary enable method requires a "secondary-boot-reg"
+- * property to specify a register address used to request the
+- * ROM code boot a secondary code. If we have any trouble
+- * getting this we fall back to uniprocessor mode.
+- */
+- if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
+- pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
+- node->name);
+- ret = -ENOENT; /* Arrange to disable SMP */
+- goto out;
+- }
+-
+- /*
+- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+- * returned, the SoC reported a uniprocessor configuration.
+- * We bail on any other error.
+- */
+- ret = scu_a9_enable();
+-out:
+- of_node_put(node);
+- if (ret) {
+- /* Update the CPU present map to reflect uniprocessor mode */
+- BUG_ON(ret != -ENOENT);
+- pr_warn("disabling SMP\n");
+- init_cpu_present(&only_cpu_0);
+- }
+-}
+-
+-/*
+- * The ROM code has the secondary cores looping, waiting for an event.
+- * When an event occurs each core examines the bottom two bits of the
+- * secondary boot register. When a core finds those bits contain its
+- * own core id, it performs initialization, including computing its boot
+- * address by clearing the boot register value's bottom two bits. The
+- * core signals that it is beginning its execution by writing its boot
+- * address back to the secondary boot register, and finally jumps to
+- * that address.
+- *
+- * So to start a core executing we need to:
+- * - Encode the (hardware) CPU id with the bottom bits of the secondary
+- * start address.
+- * - Write that value into the secondary boot register.
+- * - Generate an event to wake up the secondary CPU(s).
+- * - Wait for the secondary boot register to be re-written, which
+- * indicates the secondary core has started.
+- */
+-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+-{
+- void __iomem *boot_reg;
+- phys_addr_t boot_func;
+- u64 start_clock;
+- u32 cpu_id;
+- u32 boot_val;
+- bool timeout = false;
+-
+- cpu_id = cpu_logical_map(cpu);
+- if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
+- pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
+- return -EINVAL;
+- }
+-
+- if (!secondary_boot) {
+- pr_err("required secondary boot register not specified\n");
+- return -EINVAL;
+- }
+-
+- boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+- if (!boot_reg) {
+- pr_err("unable to map boot register for cpu %u\n", cpu_id);
+- return -ENOSYS;
+- }
+-
+- /*
+- * Secondary cores will start in secondary_startup(),
+- * defined in "arch/arm/kernel/head.S"
+- */
+- boot_func = virt_to_phys(secondary_startup);
+- BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
+- BUG_ON(boot_func > (phys_addr_t)U32_MAX);
+-
+- /* The core to start is encoded in the low bits */
+- boot_val = (u32)boot_func | cpu_id;
+- writel_relaxed(boot_val, boot_reg);
+-
+- sev();
+-
+- /* The low bits will be cleared once the core has started */
+- start_clock = local_clock();
+- while (!timeout && readl_relaxed(boot_reg) == boot_val)
+- timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
+-
+- iounmap(boot_reg);
+-
+- if (!timeout)
+- return 0;
+-
+- pr_err("timeout waiting for cpu %u to start\n", cpu_id);
+-
+- return -ENOSYS;
+-}
+-
+-static struct smp_operations bcm_smp_ops __initdata = {
+- .smp_prepare_cpus = bcm_smp_prepare_cpus,
+- .smp_boot_secondary = bcm_boot_secondary,
+-};
+-CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
+- &bcm_smp_ops);
+--- /dev/null
++++ b/arch/arm/mach-bcm/platsmp.c
+@@ -0,0 +1,326 @@
++/*
++ * Copyright (C) 2014-2015 Broadcom Corporation
++ * Copyright 2014 Linaro Limited
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/cpumask.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/of.h>
++#include <linux/sched.h>
++#include <linux/smp.h>
++
++#include <asm/cacheflush.h>
++#include <asm/smp.h>
++#include <asm/smp_plat.h>
++#include <asm/smp_scu.h>
++
++#include "bcm_nsp.h"
++
++/* Size of mapped Cortex A9 SCU address space */
++#define CORTEX_A9_SCU_SIZE 0x58
++
++#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
++#define BOOT_ADDR_CPUID_MASK 0x3
++
++/* Name of device node property defining secondary boot register location */
++#define OF_SECONDARY_BOOT "secondary-boot-reg"
++
++/* I/O address of register used to coordinate secondary core startup */
++static u32 secondary_boot;
++
++static DEFINE_SPINLOCK(boot_lock);
++
++/*
++ * Write pen_release in a way that is guaranteed to be visible to all
++ * observers, irrespective of whether they're taking part in coherency
++ * or not. This is necessary for the hotplug code to work reliably.
++ */
++static void write_pen_release(int val)
++{
++ pen_release = val;
++ /*
++ * Ensure write to pen_release is visible to the other cores,
++ * here - primary core
++ */
++ smp_wmb();
++ sync_cache_w(&pen_release);
++}
++
++/*
++ * Enable the Cortex A9 Snoop Control Unit
++ *
++ * By the time this is called we already know there are multiple
++ * cores present. We assume we're running on a Cortex A9 processor,
++ * so any trouble getting the base address register or getting the
++ * SCU base is a problem.
++ *
++ * Return 0 if successful or an error code otherwise.
++ */
++static int __init scu_a9_enable(void)
++{
++ unsigned long config_base;
++ void __iomem *scu_base;
++
++ if (!scu_a9_has_base()) {
++ pr_err("no configuration base address register!\n");
++ return -ENXIO;
++ }
++
++ /* Config base address register value is zero for uniprocessor */
++ config_base = scu_a9_get_base();
++ if (!config_base) {
++ pr_err("hardware reports only one core\n");
++ return -ENOENT;
++ }
++
++ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
++ if (!scu_base) {
++ pr_err("failed to remap config base (%lu/%u) for SCU\n",
++ config_base, CORTEX_A9_SCU_SIZE);
++ return -ENOMEM;
++ }
++
++ scu_enable(scu_base);
++
++ iounmap(scu_base); /* That's the last we'll need of this */
++
++ return 0;
++}
++
++static int nsp_write_lut(void (*secondary_startup) (void))
++{
++ void __iomem *sku_rom_lut;
++ phys_addr_t secondary_startup_phy;
++
++ if (!secondary_boot) {
++ pr_warn("required secondary boot register not specified\n");
++ return -EINVAL;
++ }
++
++ sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot,
++ sizeof(secondary_boot));
++ if (!sku_rom_lut) {
++ pr_warn("unable to ioremap SKU-ROM LUT register\n");
++ return -ENOMEM;
++ }
++
++ secondary_startup_phy = virt_to_phys(secondary_startup);
++ BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
++
++ writel_relaxed(secondary_startup_phy, sku_rom_lut);
++ /*
++ * Ensure the write is visible to the secondary core.
++ */
++ smp_wmb();
++
++ iounmap(sku_rom_lut);
++
++ return 0;
++}
++
++static void nsp_secondary_init(unsigned int cpu)
++{
++ /*
++ * Let the primary cpu know we are out of holding pen.
++ */
++ write_pen_release(-1);
++
++ /*
++ * Synchronise with the boot thread.
++ */
++ spin_lock(&boot_lock);
++ spin_unlock(&boot_lock);
++}
++
++static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
++{
++ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
++ struct device_node *node;
++ int ret;
++
++ BUG_ON(secondary_boot); /* We're called only once */
++
++ /*
++ * This function is only called via smp_ops->smp_prepare_cpu().
++ * That only happens if a "/cpus" device tree node exists
++ * and has an "enable-method" property that selects the SMP
++ * operations defined herein.
++ */
++ node = of_find_node_by_path("/cpus");
++ BUG_ON(!node);
++
++ /*
++ * Our secondary enable method requires a "secondary-boot-reg"
++ * property to specify a register address used to request the
++ * ROM code boot a secondary core. If we have any trouble
++ * getting this we fall back to uniprocessor mode.
++ */
++ if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
++ pr_warn("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
++ node->name);
++ ret = -ENOENT; /* Arrange to disable SMP */
++ goto out;
++ }
++
++ /*
++ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
++ * returned, the SoC reported a uniprocessor configuration.
++ * We bail on any other error.
++ */
++ ret = scu_a9_enable();
++out:
++ of_node_put(node);
++ if (ret) {
++ /* Update the CPU present map to reflect uniprocessor mode */
++ pr_warn("disabling SMP\n");
++ init_cpu_present(&only_cpu_0);
++ }
++}
++
++/*
++ * The ROM code has the secondary cores looping, waiting for an event.
++ * When an event occurs each core examines the bottom two bits of the
++ * secondary boot register. When a core finds those bits contain its
++ * own core id, it performs initialization, including computing its boot
++ * address by clearing the boot register value's bottom two bits. The
++ * core signals that it is beginning its execution by writing its boot
++ * address back to the secondary boot register, and finally jumps to
++ * that address.
++ *
++ * So to start a core executing we need to:
++ * - Encode the (hardware) CPU id with the bottom bits of the secondary
++ * start address.
++ * - Write that value into the secondary boot register.
++ * - Generate an event to wake up the secondary CPU(s).
++ * - Wait for the secondary boot register to be re-written, which
++ * indicates the secondary core has started.
++ */
++static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++ void __iomem *boot_reg;
++ phys_addr_t boot_func;
++ u64 start_clock;
++ u32 cpu_id;
++ u32 boot_val;
++ bool timeout = false;
++
++ cpu_id = cpu_logical_map(cpu);
++ if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
++ pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
++ return -EINVAL;
++ }
++
++ if (!secondary_boot) {
++ pr_err("required secondary boot register not specified\n");
++ return -EINVAL;
++ }
++
++ boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
++ if (!boot_reg) {
++ pr_err("unable to map boot register for cpu %u\n", cpu_id);
++ return -ENOMEM;
++ }
++
++ /*
++ * Secondary cores will start in secondary_startup(),
++ * defined in "arch/arm/kernel/head.S"
++ */
++ boot_func = virt_to_phys(secondary_startup);
++ BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
++ BUG_ON(boot_func > (phys_addr_t)U32_MAX);
++
++ /* The core to start is encoded in the low bits */
++ boot_val = (u32)boot_func | cpu_id;
++ writel_relaxed(boot_val, boot_reg);
++
++ sev();
++
++ /* The low bits will be cleared once the core has started */
++ start_clock = local_clock();
++ while (!timeout && readl_relaxed(boot_reg) == boot_val)
++ timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
++
++ iounmap(boot_reg);
++
++ if (!timeout)
++ return 0;
++
++ pr_err("timeout waiting for cpu %u to start\n", cpu_id);
++
++ return -ENXIO;
++}
++
++static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++ unsigned long timeout;
++ int ret;
++
++ /*
++ * After wake up, secondary core branches to the startup
++ * address programmed at SKU ROM LUT location.
++ */
++ ret = nsp_write_lut(nsp_secondary_startup);
++ if (ret) {
++ pr_err("unable to write startup addr to SKU ROM LUT\n");
++ goto out;
++ }
++
++ /*
++ * The secondary processor is waiting to be released from
++ * the holding pen - release it, then wait for it to flag
++ * that it has been released by resetting pen_release.
++ */
++ spin_lock(&boot_lock);
++
++ write_pen_release(cpu_logical_map(cpu));
++ /*
++ * Send an Event to wake up the secondary core which is in
++ * WFE state. Updated pen_release should also be visible to
++ * the secondary core.
++ */
++ dsb_sev();
++
++ timeout = jiffies + (1 * HZ);
++ while (time_before(jiffies, timeout)) {
++ /* Make sure loads on other CPU is visible */
++ smp_rmb();
++ if (pen_release == -1)
++ break;
++
++ udelay(10);
++ }
++
++ spin_unlock(&boot_lock);
++
++ ret = pen_release != -1 ? -ENXIO : 0;
++
++out:
++ return ret;
++}
++
++static struct smp_operations bcm_smp_ops __initdata = {
++ .smp_prepare_cpus = bcm_smp_prepare_cpus,
++ .smp_boot_secondary = kona_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
++ &bcm_smp_ops);
++
++struct smp_operations nsp_smp_ops __initdata = {
++ .smp_prepare_cpus = bcm_smp_prepare_cpus,
++ .smp_secondary_init = nsp_secondary_init,
++ .smp_boot_secondary = nsp_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.3/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch b/target/linux/bcm53xx/patches-4.3/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
new file mode 100644
index 0000000000..ad1c771df7
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
@@ -0,0 +1,50 @@
+From ddbf0ad85be06948dd214c7beb7b315ef2749e65 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 14:14:10 -0400
+Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom 4708
+
+ARM: BCM: Add SMP support for Broadcom 4708
+
+Add SMP support for Broadcom's 4708 SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/bcm4708.dtsi | 2 ++
+ arch/arm/mach-bcm/Kconfig | 2 ++
+ arch/arm/mach-bcm/Makefile | 3 +++
+ 3 files changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708.dtsi
++++ b/arch/arm/boot/dts/bcm4708.dtsi
+@@ -15,6 +15,8 @@
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
++ enable-method = "brcm,bcm-nsp-smp";
++ secondary-boot-reg = <0xffff0400>;
+
+ cpu@0 {
+ device_type = "cpu";
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -38,6 +38,8 @@ config ARCH_BCM_CYGNUS
+ config ARCH_BCM_5301X
+ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
++ select ARM_ERRATA_764369 if SMP
++ select HAVE_SMP
+ help
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -36,6 +36,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2
+
+ # BCM5301X
+ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
++ifeq ($(CONFIG_ARCH_BCM_5301X),y)
++obj-$(CONFIG_SMP) += headsmp.o platsmp.o
++endif
+
+ # BCM63XXx
+ ifeq ($(CONFIG_ARCH_BCM_63XX),y)
diff --git a/target/linux/bcm53xx/patches-4.3/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch b/target/linux/bcm53xx/patches-4.3/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch
new file mode 100644
index 0000000000..a769650e3f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch
@@ -0,0 +1,63 @@
+From 1420e53fc88673683f8990aa5342e7b2640ce165 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Oct 2015 19:13:27 +0200
+Subject: [PATCH v3 1/6] usb: xhci: plat: fix adding usb3-lpm-capable quirk
+
+The xhci->quirks member is overwritten in xhci_gen_setup() with the
+quirks given through the module load parameter. Without this patch the
+usb3-lpm-capable quirk will be over written before it gets used. This
+patch moves the quirks code to the xhci_plat_quirks() callback function
+which gets called directly after the quirks member variable is
+overwritten with the module load parameter.
+
+I do not have any hardware which is using usb3-lpm-capabls so I can not
+test this on real hardware.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/xhci-plat.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -37,12 +37,20 @@ static const struct xhci_driver_override
+
+ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ {
++ struct platform_device *pdev = to_platform_device(dev);
++ struct device_node *node = pdev->dev.of_node;
++ struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
++
+ /*
+ * As of now platform drivers don't provide MSI support so we ensure
+ * here that the generic code does not try to make a pci_dev from our
+ * dev struct in order to setup MSI
+ */
+ xhci->quirks |= XHCI_PLAT;
++
++ if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
++ (pdata && pdata->usb3_lpm_capable))
++ xhci->quirks |= XHCI_LPM_SUPPORT;
+ }
+
+ /* called during probe() after chip reset completes */
+@@ -74,8 +82,6 @@ static int xhci_plat_start(struct usb_hc
+
+ static int xhci_plat_probe(struct platform_device *pdev)
+ {
+- struct device_node *node = pdev->dev.of_node;
+- struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
+ const struct hc_driver *driver;
+ struct xhci_hcd *xhci;
+ struct resource *res;
+@@ -148,10 +154,6 @@ static int xhci_plat_probe(struct platfo
+ goto disable_clk;
+ }
+
+- if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
+- (pdata && pdata->usb3_lpm_capable))
+- xhci->quirks |= XHCI_LPM_SUPPORT;
+-
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
diff --git a/target/linux/bcm53xx/patches-4.3/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.3/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch
new file mode 100644
index 0000000000..ae70f429e9
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch
@@ -0,0 +1,135 @@
+From dd0e5f9a6a4aed849bdb80641c2a2350476cede7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 21 Jun 2015 11:10:49 +0200
+Subject: [PATCH v3 2/6] usb: xhci: add Broadcom specific fake doorbell
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes problem with controller seeing devices only in some small
+percentage of cold boots.
+This quirk is also added to the platform data so we can activate it
+when we register our platform driver.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/xhci-plat.c | 3 +++
+ drivers/usb/host/xhci.c | 57 +++++++++++++++++++++++++++++++++++++---
+ drivers/usb/host/xhci.h | 1 +
+ include/linux/usb/xhci_pdriver.h | 1 +
+ 4 files changed, 59 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -51,6 +51,9 @@ static void xhci_plat_quirks(struct devi
+ if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
+ (pdata && pdata->usb3_lpm_capable))
+ xhci->quirks |= XHCI_LPM_SUPPORT;
++
++ if (pdata && pdata->usb3_fake_doorbell)
++ xhci->quirks |= XHCI_FAKE_DOORBELL;
+ }
+
+ /* called during probe() after chip reset completes */
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -121,6 +121,39 @@ int xhci_halt(struct xhci_hcd *xhci)
+ return ret;
+ }
+
++static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
++{
++ u32 temp;
++
++ /* alloc a virt device for slot */
++ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
++ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
++ return -ENOMEM;
++ }
++
++ /* ring fake doorbell for slot_id ep 0 */
++ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
++ usleep_range(1000, 1500);
++
++ /* read the status register to check if HSE is set or not? */
++ temp = readl(&xhci->op_regs->status);
++
++ /* clear HSE if set */
++ if (temp & STS_FATAL) {
++ xhci_dbg(xhci, "HSE problem detected, status: 0x%x\n", temp);
++ temp &= ~(0x1fff);
++ temp |= STS_FATAL;
++ writel(temp, &xhci->op_regs->status);
++ usleep_range(1000, 1500);
++ readl(&xhci->op_regs->status);
++ }
++
++ /* Free virt device */
++ xhci_free_virt_device(xhci, slot_id);
++
++ return 0;
++}
++
+ /*
+ * Set the run bit and wait for the host to be running.
+ */
+@@ -557,10 +590,25 @@ int xhci_init(struct usb_hcd *hcd)
+
+ static int xhci_run_finished(struct xhci_hcd *xhci)
+ {
+- if (xhci_start(xhci)) {
+- xhci_halt(xhci);
+- return -ENODEV;
++ int err;
++
++ err = xhci_start(xhci);
++ if (err) {
++ err = -ENODEV;
++ goto out_err;
++ }
++ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
++ err = xhci_fake_doorbell(xhci, 1);
++ if (err)
++ goto out_err;
++
++ err = xhci_start(xhci);
++ if (err) {
++ err = -ENODEV;
++ goto out_err;
++ }
+ }
++
+ xhci->shared_hcd->state = HC_STATE_RUNNING;
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+@@ -570,6 +618,9 @@ static int xhci_run_finished(struct xhci
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Finished xhci_run for USB3 roothub");
+ return 0;
++out_err:
++ xhci_halt(xhci);
++ return err;
+ }
+
+ /*
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1575,6 +1575,7 @@ struct xhci_hcd {
+ /* For controllers with a broken beyond repair streams implementation */
+ #define XHCI_BROKEN_STREAMS (1 << 19)
+ #define XHCI_PME_STUCK_QUIRK (1 << 20)
++#define XHCI_FAKE_DOORBELL (1 << 21)
+ unsigned int num_active_eps;
+ unsigned int limit_active_eps;
+ /* There are two roothubs to keep track of bus suspend info for */
+--- a/include/linux/usb/xhci_pdriver.h
++++ b/include/linux/usb/xhci_pdriver.h
+@@ -22,6 +22,7 @@
+ */
+ struct usb_xhci_pdata {
+ unsigned usb3_lpm_capable:1;
++ unsigned usb3_fake_doorbell:1;
+ };
+
+ #endif /* __USB_CORE_XHCI_PDRIVER_H */
diff --git a/target/linux/bcm53xx/patches-4.3/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch b/target/linux/bcm53xx/patches-4.3/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
new file mode 100644
index 0000000000..1e28857655
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
@@ -0,0 +1,75 @@
+From c7c7bf7fcbacadac7781783de25fe1e13e2a2c35 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 12:33:46 +0200
+Subject: [PATCH v3 3/6] usb: bcma: make helper creating platform dev more
+ generic
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Having "bool ohci" argument bounded us to two cases only and didn't
+allow re-using this code for XHCI.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 24 +++++++++++++-----------
+ 1 file changed, 13 insertions(+), 11 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -249,7 +249,10 @@ static const struct usb_ehci_pdata ehci_
+ static const struct usb_ohci_pdata ohci_pdata = {
+ };
+
+-static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
++static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
++ const char *name, u32 addr,
++ const void *data,
++ size_t size)
+ {
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+@@ -264,8 +267,7 @@ static struct platform_device *bcma_hcd_
+ hci_res[1].start = dev->irq;
+ hci_res[1].flags = IORESOURCE_IRQ;
+
+- hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+- "ehci-platform" , 0);
++ hci_dev = platform_device_alloc(name, 0);
+ if (!hci_dev)
+ return ERR_PTR(-ENOMEM);
+
+@@ -276,12 +278,8 @@ static struct platform_device *bcma_hcd_
+ ARRAY_SIZE(hci_res));
+ if (ret)
+ goto err_alloc;
+- if (ohci)
+- ret = platform_device_add_data(hci_dev, &ohci_pdata,
+- sizeof(ohci_pdata));
+- else
+- ret = platform_device_add_data(hci_dev, &ehci_pdata,
+- sizeof(ehci_pdata));
++ if (data)
++ ret = platform_device_add_data(hci_dev, data, size);
+ if (ret)
+ goto err_alloc;
+ ret = platform_device_add(hci_dev);
+@@ -334,11 +332,15 @@ static int bcma_hcd_probe(struct bcma_de
+ && chipinfo->rev == 0)
+ ohci_addr = 0x18009000;
+
+- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
++ ohci_addr, &ohci_pdata,
++ sizeof(ohci_pdata));
+ if (IS_ERR(usb_dev->ohci_dev))
+ return PTR_ERR(usb_dev->ohci_dev);
+
+- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
++ dev->addr, &ehci_pdata,
++ sizeof(ehci_pdata));
+ if (IS_ERR(usb_dev->ehci_dev)) {
+ err = PTR_ERR(usb_dev->ehci_dev);
+ goto err_unregister_ohci_dev;
diff --git a/target/linux/bcm53xx/patches-4.3/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch b/target/linux/bcm53xx/patches-4.3/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
new file mode 100644
index 0000000000..d636e86046
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
@@ -0,0 +1,104 @@
+From fa5622c2fadae573dd6b0f5bffe436b230b411f6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 12:52:07 +0200
+Subject: [PATCH v3 4/6] usb: bcma: use separated function for USB 2.0
+ initialization
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This will allow adding USB 3.0 (XHCI) support cleanly.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 51 +++++++++++++++++++++++++++++++--------------
+ 1 file changed, 35 insertions(+), 16 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -34,6 +34,7 @@ MODULE_DESCRIPTION("Common USB driver fo
+ MODULE_LICENSE("GPL");
+
+ struct bcma_hcd_device {
++ struct bcma_device *core;
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
+ };
+@@ -293,27 +294,16 @@ err_alloc:
+ return ERR_PTR(ret);
+ }
+
+-static int bcma_hcd_probe(struct bcma_device *dev)
++static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
+ {
+- int err;
++ struct bcma_device *dev = usb_dev->core;
++ struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
+ u32 ohci_addr;
+- struct bcma_hcd_device *usb_dev;
+- struct bcma_chipinfo *chipinfo;
+-
+- chipinfo = &dev->bus->chipinfo;
+-
+- /* TODO: Probably need checks here; is the core connected? */
++ int err;
+
+ if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+- usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
+- GFP_KERNEL);
+- if (!usb_dev)
+- return -ENOMEM;
+-
+- bcma_hci_platform_power_gpio(dev, true);
+-
+ switch (dev->id.id) {
+ case BCMA_CORE_NS_USB20:
+ bcma_hcd_init_chip_arm(dev);
+@@ -346,7 +336,6 @@ static int bcma_hcd_probe(struct bcma_de
+ goto err_unregister_ohci_dev;
+ }
+
+- bcma_set_drvdata(dev, usb_dev);
+ return 0;
+
+ err_unregister_ohci_dev:
+@@ -354,6 +343,36 @@ err_unregister_ohci_dev:
+ return err;
+ }
+
++static int bcma_hcd_probe(struct bcma_device *dev)
++{
++ int err;
++ struct bcma_hcd_device *usb_dev;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
++ GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++ usb_dev->core = dev;
++
++ bcma_hci_platform_power_gpio(dev, true);
++
++ switch (dev->id.id) {
++ case BCMA_CORE_USB20_HOST:
++ case BCMA_CORE_NS_USB20:
++ err = bcma_hcd_usb20_init(usb_dev);
++ if (err)
++ return err;
++ break;
++ default:
++ return -ENODEV;
++ }
++
++ bcma_set_drvdata(dev, usb_dev);
++ return 0;
++}
++
+ static void bcma_hcd_remove(struct bcma_device *dev)
+ {
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
diff --git a/target/linux/bcm53xx/patches-4.3/197-USB-bcma-add-USB-3.0-support.patch b/target/linux/bcm53xx/patches-4.3/197-USB-bcma-add-USB-3.0-support.patch
new file mode 100644
index 0000000000..f477a1b65d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/197-USB-bcma-add-USB-3.0-support.patch
@@ -0,0 +1,295 @@
+From 121ec6539abedbc0e975cf35f48ee044b323e4c3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 17:14:26 +0200
+Subject: [PATCH v3 5/6] usb: bcma: add USB 3.0 support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 225 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 225 insertions(+)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -28,6 +28,7 @@
+ #include <linux/of_gpio.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <linux/usb/xhci_pdriver.h>
+
+ MODULE_AUTHOR("Hauke Mehrtens");
+ MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+@@ -37,6 +38,7 @@ struct bcma_hcd_device {
+ struct bcma_device *core;
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
++ struct platform_device *xhci_dev;
+ };
+
+ /* Wait for bitmask in a register to get set or cleared.
+@@ -250,6 +252,10 @@ static const struct usb_ehci_pdata ehci_
+ static const struct usb_ohci_pdata ohci_pdata = {
+ };
+
++static const struct usb_xhci_pdata xhci_pdata = {
++ .usb3_fake_doorbell = 1
++};
++
+ static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
+ const char *name, u32 addr,
+ const void *data,
+@@ -343,6 +349,216 @@ err_unregister_ohci_dev:
+ return err;
+ }
+
++static bool bcma_wait_reg(struct bcma_bus *bus, void __iomem *addr, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = readl(addr);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ pr_err("Timeout waiting for register %p\n", addr);
++
++ return false;
++}
++
++static void bcma_hcd_usb30_phy_init(struct bcma_hcd_device *bcma_hcd)
++{
++ struct bcma_device *core = bcma_hcd->core;
++ struct bcma_bus *bus = core->bus;
++ struct bcma_chipinfo *chipinfo = &bus->chipinfo;
++ struct bcma_drv_cc_b *ccb = &bus->drv_cc_b;
++ struct bcma_device *arm_core;
++ void __iomem *dmu = NULL;
++ u32 cru_straps_ctrl;
++
++ if (chipinfo->id != BCMA_CHIP_ID_BCM4707 &&
++ chipinfo->id != BCMA_CHIP_ID_BCM53018)
++ return;
++
++ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9);
++ if (!arm_core)
++ return;
++
++ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
++ if (!dmu)
++ goto out;
++
++ /* Check strapping of PCIE/USB3 SEL */
++ cru_straps_ctrl = ioread32(dmu + 0x2a0);
++ if ((cru_straps_ctrl & 0x10) == 0)
++ goto out;
++
++ /* Perform USB3 system soft reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
++
++ /* Enable MDIO. Setting MDCDIV as 26 */
++ iowrite32(0x0000009a, ccb->mii + 0x000);
++ udelay(2);
++
++ switch (chipinfo->id) {
++ case BCMA_CHIP_ID_BCM4707:
++ if (chipinfo->rev == 4) {
++ /* For NS-B0, USB3 PLL Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ /* Clear ana_pllSeqStart */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061000, ccb->mii + 0x004);
++
++ /* CMOS Divider ratio to 25 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ /* Asserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582ec000, ccb->mii + 0x004);
++
++ /* Deaaserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582e8000, ccb->mii + 0x004);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++
++ /* Set ana_pllSeqStart */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58069000, ccb->mii + 0x004);
++
++ /* RXPMD block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8020, ccb->mii + 0x004);
++
++ /* CDR int loop locking BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58120049, ccb->mii + 0x004);
++
++ /* CDR int loop acquisition BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580e0049, ccb->mii + 0x004);
++
++ /* CDR prop loop BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a005c, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ } else {
++ /* PLL30 block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e80e0, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a009c, ccb->mii + 0x004);
++
++ /* Enable SSC */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8040, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a21d3, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061003, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ }
++ break;
++ case BCMA_CHIP_ID_BCM53018:
++ /* USB3 PLL Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ /* Assert Ana_Pllseq start */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061000, ccb->mii + 0x004);
++
++ /* Assert CML Divider ratio to 26 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ /* Asserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582ec000, ccb->mii + 0x004);
++
++ /* Deaaserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582e8000, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++
++ /* PLL frequency monitor enable */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58069000, ccb->mii + 0x004);
++
++ /* PIPE Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8060, ccb->mii + 0x004);
++
++ /* CMPMAX & CMPMINTH setting */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580af30d, ccb->mii + 0x004);
++
++ /* DEGLITCH MIN & MAX setting */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580e6302, ccb->mii + 0x004);
++
++ /* TXPMD block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8040, ccb->mii + 0x004);
++
++ /* Enabling SSC */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061003, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ break;
++ }
++out:
++ if (dmu)
++ iounmap(dmu);
++}
++
++static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
++{
++ struct bcma_device *core = bcma_hcd->core;
++
++ bcma_core_enable(core, 0);
++
++ bcma_hcd_usb30_phy_init(bcma_hcd);
++
++ bcma_hcd->xhci_dev = bcma_hcd_create_pdev(core, "xhci-hcd", core->addr,
++ &xhci_pdata,
++ sizeof(xhci_pdata));
++ if (IS_ERR(bcma_hcd->ohci_dev))
++ return PTR_ERR(bcma_hcd->ohci_dev);
++
++ return 0;
++}
++
+ static int bcma_hcd_probe(struct bcma_device *dev)
+ {
+ int err;
+@@ -365,6 +581,11 @@ static int bcma_hcd_probe(struct bcma_de
+ if (err)
+ return err;
+ break;
++ case BCMA_CORE_NS_USB30:
++ err = bcma_hcd_usb30_init(usb_dev);
++ if (err)
++ return err;
++ break;
+ default:
+ return -ENODEV;
+ }
+@@ -378,11 +599,14 @@ static void bcma_hcd_remove(struct bcma_
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
++ struct platform_device *xhci_dev = usb_dev->xhci_dev;
+
+ if (ohci_dev)
+ platform_device_unregister(ohci_dev);
+ if (ehci_dev)
+ platform_device_unregister(ehci_dev);
++ if (xhci_dev)
++ platform_device_unregister(xhci_dev);
+
+ bcma_core_disable(dev, 0);
+ }
+@@ -419,6 +643,7 @@ static int bcma_hcd_resume(struct bcma_d
+ static const struct bcma_device_id bcma_hcd_table[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ {},
+ };
+ MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-4.3/198-USB-bcma-fix-setting-VCC-GPIO-value.patch b/target/linux/bcm53xx/patches-4.3/198-USB-bcma-fix-setting-VCC-GPIO-value.patch
new file mode 100644
index 0000000000..75932937c0
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/198-USB-bcma-fix-setting-VCC-GPIO-value.patch
@@ -0,0 +1,54 @@
+From 7572673e06393b117f87b20b82be0518634d7042 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 21 Jun 2015 12:09:57 +0200
+Subject: [PATCH v3 6/6] usb: bcma: fix setting VCC GPIO value
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It wasn't working (on most of devices?) without setting GPIO direction
+and wasn't respecting ACTIVE_LOW flag.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 14 ++++++++++----
+ 1 file changed, 10 insertions(+), 4 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -26,6 +26,7 @@
+ #include <linux/slab.h>
+ #include <linux/of.h>
+ #include <linux/of_gpio.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
+ #include <linux/usb/xhci_pdriver.h>
+@@ -231,17 +232,22 @@ static void bcma_hcd_init_chip_arm(struc
+
+ static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
+ {
++ enum of_gpio_flags of_flags;
+ int gpio;
+
+- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
++ gpio = of_get_named_gpio_flags(dev->dev.of_node, "vcc-gpio", 0, &of_flags);
+ if (!gpio_is_valid(gpio))
+ return;
+
+ if (val) {
+- gpio_request(gpio, "bcma-hcd-gpio");
+- gpio_set_value(gpio, 1);
++ unsigned long flags = 0;
++ bool active_low = !!(of_flags & OF_GPIO_ACTIVE_LOW);
++
++ flags |= active_low ? GPIOF_ACTIVE_LOW : 0;
++ flags |= active_low ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
++ gpio_request_one(gpio, flags, "bcma-hcd-gpio");
+ } else {
+- gpio_set_value(gpio, 0);
++ gpiod_set_value(gpio_to_desc(gpio), 0);
+ gpio_free(gpio);
+ }
+ }
diff --git a/target/linux/bcm53xx/patches-4.3/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch b/target/linux/bcm53xx/patches-4.3/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
new file mode 100644
index 0000000000..62bda2e830
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
@@ -0,0 +1,86 @@
+From: Florian Fainelli <f.fainelli@gmail.com>
+Subject: [PATCH] ARM: BCM5301x: Disable MMU and Dcache during decompression
+Date: Tue, 14 Jul 2015 16:12:08 -0700
+
+Use the existing __armv7_mmu_cache_flush() to perform the cache flush
+since this does what we are after.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/compressed/Makefile | 4 +++
+ arch/arm/boot/compressed/head-bcm_5301x-mpcore.S | 37 ++++++++++++++++++++++++
+ arch/arm/boot/compressed/head.S | 2 ++
+ 3 files changed, 43 insertions(+)
+ create mode 100644 arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
+
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -31,6 +31,10 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
+ OBJS += ll_char_wr.o font.o
+ endif
+
++ifeq ($(CONFIG_ARCH_BCM_5301X),y)
++OBJS += head-bcm_5301x-mpcore.o
++endif
++
+ ifeq ($(CONFIG_ARCH_SA1100),y)
+ OBJS += head-sa1100.o
+ endif
+--- /dev/null
++++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
+@@ -0,0 +1,37 @@
++/*
++ *
++ * Platform specific tweaks. This is merged into head.S by the linker.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/assembler.h>
++#include <asm/cp15.h>
++
++ .section ".start", "ax"
++
++/*
++ * This code section is spliced into the head code by the linker
++ */
++
++__plat_uncompress_start:
++
++ @ Preserve r8/r7 i.e. kernel entry values
++ mov r12, r8
++
++ @ Clear MMU enable and Dcache enable bits
++ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
++ bic r0, #CR_C|CR_M
++ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
++ nop
++
++ @ Call the cache invalidation routine
++ bl __armv7_mmu_cache_flush_fn
++ nop
++ mov r0,#0
++ ldr r3, =0x19022000 @ L2 cache controller, control reg
++ str r0, [r3, #0x100] @ Disable L2 cache
++ nop
++
++ @ Restore
++ mov r8, r12
+--- a/arch/arm/boot/compressed/head.S
++++ b/arch/arm/boot/compressed/head.S
+@@ -1152,6 +1152,7 @@ __armv7_mmu_cache_flush:
+ hierarchical:
+ mcr p15, 0, r10, c7, c10, 5 @ DMB
+ stmfd sp!, {r0-r7, r9-r11}
++ENTRY(__armv7_mmu_cache_flush_fn)
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+@@ -1201,6 +1202,7 @@ iflush:
+ mcr p15, 0, r10, c7, c10, 4 @ DSB
+ mcr p15, 0, r10, c7, c5, 4 @ ISB
+ mov pc, lr
++ENDPROC(__armv7_mmu_cache_flush_fn)
+
+ __armv5tej_mmu_cache_flush:
+ tst r4, #1
diff --git a/target/linux/bcm53xx/patches-4.3/301-ARM-BCM5301X-Add-SPROM.patch b/target/linux/bcm53xx/patches-4.3/301-ARM-BCM5301X-Add-SPROM.patch
new file mode 100644
index 0000000000..9ca76b3d4c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/301-ARM-BCM5301X-Add-SPROM.patch
@@ -0,0 +1,26 @@
+From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 7 Jun 2015 16:18:18 +0200
+Subject: [PATCH] ARM: BCM5301X: Add SPROM
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -105,6 +105,10 @@
+ };
+ };
+
++ sprom0: sprom@0 {
++ compatible = "brcm,bcm47xx-sprom";
++ };
++
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
new file mode 100644
index 0000000000..82ac24e3fd
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
@@ -0,0 +1,69 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
++ bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
+ bcm4708-netgear-r6250.dtb \
+ bcm4708-netgear-r6300-v2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -0,0 +1,48 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Linksys EA6300 V1
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "linksys,ea6300v1", "brcm,bcm4708";
++ model = "Linksys EA6300 V1";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.3/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch b/target/linux/bcm53xx/patches-4.3/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
new file mode 100644
index 0000000000..802188db17
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
@@ -0,0 +1,41 @@
+From 504dba5b073a9009ae1e3f2fc53ea9c3aa10c38a Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 13 May 2015 20:56:38 +0200
+Subject: [PATCH] ARM: BCM5301X: Add Buffalo WXR-1900DHP clock and USB power
+ control
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -24,6 +24,23 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ clocks {
++ clk_periph: periph {
++ clock-frequency = <500000000>;
++ };
++ };
++
++ axi@18000000 {
++ usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
diff --git a/target/linux/bcm53xx/patches-4.3/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch b/target/linux/bcm53xx/patches-4.3/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
new file mode 100644
index 0000000000..871598f2e0
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
@@ -0,0 +1,63 @@
+From f1ee1275f65e87e035260f4d09a0f0ba98c6854d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 21 Jun 2015 12:56:32 +0200
+Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 20 ++++++++++++++++++++
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 +++++++++++
+ 2 files changed, 31 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -24,6 +24,26 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ axi@18000000 {
++ usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++ };
++
++ usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ };
++ };
++
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -24,6 +24,17 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ axi@18000000 {
++ usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
diff --git a/target/linux/bcm53xx/patches-4.3/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-4.3/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
new file mode 100644
index 0000000000..4e25647dbb
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
@@ -0,0 +1,170 @@
+From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 14 Jan 2015 08:33:25 +0100
+Subject: [PATCH] ARM: BCM5310X: Enable earlyprintk on tested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +-
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-1750DHP (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R6250 V1 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-N18U (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-900DHP (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R8000 (BCM4709)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC56U (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC68U (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -17,7 +17,7 @@
+ model = "Luxul XWC-1000 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WXR-1900DHP";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -17,7 +17,7 @@
+ model = "SmartRG SR400ac";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC87U";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R7000";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -17,7 +17,7 @@
+ model = "Linksys EA6300 V1";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
diff --git a/target/linux/bcm53xx/patches-4.3/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-4.3/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
new file mode 100644
index 0000000000..750d83368c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
@@ -0,0 +1,173 @@
+From 36b2fbb3badf0e32b371e1f7579a95d4fe25c0e1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 14 Jan 2015 09:13:58 +0100
+Subject: [PATCH] ARM: BCM5301X: Specify RAM on devices by including HIGHMEM
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
+ 5 files changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
+ };
+
+ axi@18000000 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ axi@18000000 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ spi {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
+ };
+
+ clocks {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
diff --git a/target/linux/bcm53xx/patches-4.3/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.3/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
new file mode 100644
index 0000000000..f9ca7eb7c1
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -123,6 +123,12 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
++ power {
++ label = "Power";
++ linux,code = <KEY_POWER>;
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ };
++
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-4.3/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-4.3/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
new file mode 100644
index 0000000000..dfeb70e179
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
@@ -0,0 +1,111 @@
+From b49d7bb4825654f81bcee8e219028712811515a5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 29 Jun 2015 08:11:36 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable ChipCommon UART on untested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++++
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++++
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 5 +++++
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 5 +++++
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 5 +++++
+ 8 files changed, 35 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -96,3 +96,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -83,3 +83,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -83,3 +83,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -77,3 +77,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -37,3 +37,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -65,3 +65,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -144,3 +144,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -77,3 +77,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -104,4 +104,5 @@
+
+ &uart0 {
+ status = "okay";
++ clock-frequency = <125000000>;
+ };
diff --git a/target/linux/bcm53xx/patches-4.3/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch b/target/linux/bcm53xx/patches-4.3/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
new file mode 100644
index 0000000000..ccdb28b54d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
@@ -0,0 +1,31 @@
+From d658c21d6697293a928434fd6ac19264b5a8948d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 30 Jan 2015 08:25:54 +0100
+Subject: [PATCH] mtd: bcm47xxpart: scan whole flash on ARCH_BCM_5301X
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -120,9 +120,15 @@ static int bcm47xxpart_parse(struct mtd_
+ /* Parse block by block looking for magics */
+ for (offset = 0; offset <= master->size - blocksize;
+ offset += blocksize) {
++#ifndef CONFIG_ARCH_BCM_5301X
++ /*
++ * ARM routers may have partitions in higher memory. E.g.
++ * Netgear R8000 has board_data at 0x2600000.
++ */
+ /* Nothing more in higher memory */
+ if (offset >= 0x2000000)
+ break;
++#endif
+
+ if (curr_part >= BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
diff --git a/target/linux/bcm53xx/patches-4.3/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-4.3/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
new file mode 100644
index 0000000000..79af78507c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/spi-nor/Kconfig
++++ b/drivers/mtd/spi-nor/Kconfig
+@@ -40,4 +40,10 @@ config SPI_NXP_SPIFI
+ Flash. Enable this option if you have a device with a SPIFI
+ controller and want to access the Flash as a mtd device.
+
++config MTD_SPI_BCM53XXSPIFLASH
++ tristate "SPI-NOR flashes connected to the Broadcom ARM SoC"
++ depends on MTD_SPI_NOR
++ help
++ SPI driver for flashes used on Broadcom ARM SoCs.
++
+ endif # MTD_SPI_NOR
+--- a/drivers/mtd/spi-nor/Makefile
++++ b/drivers/mtd/spi-nor/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+ obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
++obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH) += bcm53xxspiflash.o
+ obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
diff --git a/target/linux/bcm53xx/patches-4.3/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.3/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
new file mode 100644
index 0000000000..a3d0f75b48
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
@@ -0,0 +1,59 @@
+From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Thu, 16 Oct 2014 20:52:16 +0200
+Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/ubi/attach.c | 5 +++++
+ drivers/mtd/ubi/io.c | 4 ++++
+ drivers/mtd/ubi/ubi.h | 1 +
+ 3 files changed, 10 insertions(+)
+
+--- a/drivers/mtd/ubi/attach.c
++++ b/drivers/mtd/ubi/attach.c
+@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
+ static struct ubi_ec_hdr *ech;
+ static struct ubi_vid_hdr *vidh;
+
++/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
++bool erase_all_next;
++
+ /**
+ * add_to_list - add physical eraseblock to a list.
+ * @ai: attaching information
+@@ -1427,6 +1430,8 @@ int ubi_attach(struct ubi_device *ubi, i
+ if (!ai)
+ return -ENOMEM;
+
++ erase_all_next = false;
++
+ #ifdef CONFIG_MTD_UBI_FASTMAP
+ /* On small flash devices we disable fastmap in any case. */
+ if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
+--- a/drivers/mtd/ubi/io.c
++++ b/drivers/mtd/ubi/io.c
+@@ -755,6 +755,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
+ }
+
+ magic = be32_to_cpu(ec_hdr->magic);
++ if (magic == 0xdeadc0de)
++ erase_all_next = true;
++ if (erase_all_next)
++ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
+ if (magic != UBI_EC_HDR_MAGIC) {
+ if (mtd_is_eccerr(read_err))
+ return UBI_IO_BAD_HDR_EBADMSG;
+--- a/drivers/mtd/ubi/ubi.h
++++ b/drivers/mtd/ubi/ubi.h
+@@ -781,6 +781,7 @@ extern struct mutex ubi_devices_mutex;
+ extern struct blocking_notifier_head ubi_notifiers;
+
+ /* attach.c */
++extern bool erase_all_next;
+ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+ int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+ struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
diff --git a/target/linux/bcm53xx/patches-4.3/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.3/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
new file mode 100644
index 0000000000..6015c4aaca
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
@@ -0,0 +1,35 @@
+From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 13 May 2015 14:13:28 +0200
+Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/net/phy/b53/b53_common.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/phy/b53/b53_common.c
++++ b/drivers/net/phy/b53/b53_common.c
+@@ -25,6 +25,7 @@
+ #include <linux/module.h>
+ #include <linux/switch.h>
+ #include <linux/platform_data/b53.h>
++#include <linux/of.h>
+
+ #include "b53_regs.h"
+ #include "b53_priv.h"
+@@ -1313,6 +1314,11 @@ static int b53_switch_init(struct b53_de
+ sw_dev->cpu_port = 5;
+ }
+
++ if (of_machine_is_compatible("asus,rt-ac87u"))
++ sw_dev->cpu_port = 7;
++ else if (of_machine_is_compatible("netgear,r8000"))
++ sw_dev->cpu_port = 8;
++
+ /* cpu port is always last */
+ sw_dev->ports = sw_dev->cpu_port + 1;
+ dev->enabled_ports |= BIT(sw_dev->cpu_port);
diff --git a/target/linux/bcm53xx/patches-4.3/800-bcma-use-two-different-initcalls-if-built-in.patch b/target/linux/bcm53xx/patches-4.3/800-bcma-use-two-different-initcalls-if-built-in.patch
new file mode 100644
index 0000000000..4e5793bc86
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/800-bcma-use-two-different-initcalls-if-built-in.patch
@@ -0,0 +1,65 @@
+From 666bdfc027cde41a171862dc698987a378c8b66a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 9 Feb 2015 18:00:42 +0100
+Subject: [PATCH RFC] bcma: use two different initcalls if built-in
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is needed as we can't initialize bus during fs_initcall.
+Initialization requires SPROM which depends on NVRAM which depends on
+mtd. Since mtd, spi, nand, spi-nor use standard module_init, we have to
+do the same in bcma.
+Without this we'll try to initialize SPROM without having a ready SPROM
+proviver registered using bcma_arch_register_fallback_sprom.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+While this patch seems to work and I can compile bcma as built-in and
+module, I'm not too proud of it. I don't really like these #if(n)def
+tricks and I'm afraid bcma_modinit may be called even if
+bcma_modinit_early failed.
+
+Do you see any better idea of solving this?
+---
+ drivers/bcma/main.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -673,13 +673,25 @@ static int bcma_device_uevent(struct dev
+ core->id.rev, core->id.class);
+ }
+
++/* Bus has to be registered early, before any bcma driver */
++static int __init bcma_modinit_early(void)
++{
++ return bus_register(&bcma_bus_type);
++}
++#ifndef MODULE
++fs_initcall(bcma_modinit_early);
++#endif
++
++/* Initialization has to be done later with SPI/mtd/NAND/SPROM available */
+ static int __init bcma_modinit(void)
+ {
+ int err;
+
+- err = bus_register(&bcma_bus_type);
++#ifdef MODULE
++ err = bcma_modinit_early();
+ if (err)
+ return err;
++#endif
+
+ err = bcma_host_soc_register_driver();
+ if (err) {
+@@ -696,7 +708,7 @@ static int __init bcma_modinit(void)
+
+ return err;
+ }
+-fs_initcall(bcma_modinit);
++module_init(bcma_modinit);
+
+ static void __exit bcma_modexit(void)
+ {
diff --git a/target/linux/bcm53xx/patches-4.3/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch b/target/linux/bcm53xx/patches-4.3/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
new file mode 100644
index 0000000000..c1dfa92013
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
@@ -0,0 +1,42 @@
+From 21500872c1dba33848ddcf6bea97d58772675d36 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 17 May 2015 14:00:52 +0200
+Subject: [PATCH] mtd: bcm47xxpart: workaround for Asus RT-AC87U "asus"
+ partition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -14,6 +14,7 @@
+ #include <linux/slab.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+
+ #include <uapi/linux/magic.h>
+
+@@ -135,6 +136,17 @@ static int bcm47xxpart_parse(struct mtd_
+ break;
+ }
+
++ /*
++ * Ugly workaround for Asus RT-AC87U and its "asus" partition.
++ * It uses JFFS2 which we don't (want to) detect. We should
++ * probably use DT to define partitions but we need a working
++ * TRX firmware splitter first.
++ */
++ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
++ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
++ continue;
++ }
++
+ /* Read beginning of the block */
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+ &bytes_read, (uint8_t *)buf) < 0) {