aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/lantiq/config-4.1165
-rw-r--r--target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch5532
-rw-r--r--target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch31
-rw-r--r--target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch500
-rw-r--r--target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch111
-rw-r--r--target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch1028
-rw-r--r--target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch68
-rw-r--r--target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch24
-rw-r--r--target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch44
-rw-r--r--target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch41
-rw-r--r--target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch55
-rw-r--r--target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch89
-rw-r--r--target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch125
-rw-r--r--target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch25
-rw-r--r--target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch44
-rw-r--r--target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch537
-rw-r--r--target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch364
-rw-r--r--target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch3340
-rw-r--r--target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch53
-rw-r--r--target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch907
-rw-r--r--target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch166
-rw-r--r--target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch1034
-rw-r--r--target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch31
-rw-r--r--target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch45
-rw-r--r--target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch630
-rw-r--r--target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch32
-rw-r--r--target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch21
-rw-r--r--target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch97
-rw-r--r--target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch35
-rw-r--r--target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch46
-rw-r--r--target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch3156
-rw-r--r--target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch23
-rw-r--r--target/linux/lantiq/patches-4.1/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch1378
-rw-r--r--target/linux/lantiq/patches-4.1/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch28
-rw-r--r--target/linux/lantiq/patches-4.1/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch28
-rw-r--r--target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch1133
-rw-r--r--target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch158
-rw-r--r--target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch217
-rw-r--r--target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch11
39 files changed, 0 insertions, 21352 deletions
diff --git a/target/linux/lantiq/config-4.1 b/target/linux/lantiq/config-4.1
deleted file mode 100644
index 35a1233135..0000000000
--- a/target/linux/lantiq/config-4.1
+++ /dev/null
@@ -1,165 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_DT_EASY50712=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MM_LANTIQ=y
-CONFIG_GPIO_STP_XWAY=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_LANTIQ=y
-CONFIG_LANTIQ_ETOP=y
-# CONFIG_LANTIQ_PHY is not set
-CONFIG_LANTIQ_WDT=y
-# CONFIG_LANTIQ_XRX200 is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_NAND_XWAY is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIE_LANTIQ is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AMD is not set
-CONFIG_PINCTRL_LANTIQ=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_XWAY=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PSB6970_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_LANTIQ=y
-# CONFIG_SOC_AMAZON_SE is not set
-# CONFIG_SOC_FALCON is not set
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USE_OF=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch
deleted file mode 100644
index 1b78acd0d8..0000000000
--- a/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch
+++ /dev/null
@@ -1,5532 +0,0 @@
-From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:12:28 +0200
-Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/Kconfig | 10 +
- arch/mips/lantiq/xway/sysctrl.c | 2 +
- arch/mips/pci/Makefile | 2 +
- arch/mips/pci/fixup-lantiq-pcie.c | 82 +++
- arch/mips/pci/fixup-lantiq.c | 5 +-
- arch/mips/pci/ifxmips_pci_common.h | 57 ++
- arch/mips/pci/ifxmips_pcie.c | 1099 ++++++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie.h | 135 ++++
- arch/mips/pci/ifxmips_pcie_ar10.h | 290 ++++++++
- arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++++
- arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++++
- arch/mips/pci/ifxmips_pcie_pm.c | 176 +++++
- arch/mips/pci/ifxmips_pcie_pm.h | 36 +
- arch/mips/pci/ifxmips_pcie_reg.h | 1001 +++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++++
- arch/mips/pci/pci.c | 25 +
- arch/mips/pci/pcie-lantiq.h | 1305 ++++++++++++++++++++++++++++++++++++
- drivers/pci/pcie/aer/Kconfig | 2 +-
- include/linux/pci.h | 2 +
- include/linux/pci_ids.h | 6 +
- 20 files changed, 5374 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pci_common.h
- create mode 100644 arch/mips/pci/ifxmips_pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pcie.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
- create mode 100644 arch/mips/pci/pcie-lantiq.h
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -17,6 +17,7 @@ config SOC_XWAY
- bool "XWAY"
- select SOC_TYPE_XWAY
- select HW_HAS_PCI
-+ select ARCH_SUPPORTS_MSI
-
- config SOC_FALCON
- bool "FALCON"
-@@ -37,6 +38,15 @@ config PCI_LANTIQ
- bool "PCI Support"
- depends on SOC_XWAY && PCI
-
-+config PCIE_LANTIQ
-+ bool "PCIE Support"
-+ depends on SOC_XWAY && PCI
-+
-+config PCIE_LANTIQ_MSI
-+ bool
-+ depends on PCIE_LANTIQ && PCI_MSI
-+ default y
-+
- config XRX200_PHY_FW
- bool "XRX200 PHY firmware loader"
- depends on SOC_XWAY
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_PPE_TOP);
- clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
-+ pmu_w32(~0, PMU_PWDSR1);
-+ pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR);
- } else if (of_machine_is_compatible("lantiq,ar9")) {
- clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- ltq_ar9_fpi_hz(), CLOCK_250M);
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -45,6 +45,8 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
-+obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq-pcie.c
-@@ -0,0 +1,74 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_fixup_pcie.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_fixup_pcie.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe Fixup functions source file
-+*/
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/pci_ids.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "pcie-lantiq.h"
-+
-+static void
-+ifx_pcie_fixup_resource(struct pci_dev *dev)
-+{
-+ u32 reg;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+ printk("%s: fixup host controller %s (%04x:%04x)\n",
-+ __func__, pci_name(dev), dev->vendor, dev->device);
-+
-+ /* Setup COMMAND register */
-+ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* |
-+ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
-+ pci_write_config_word(dev, PCI_COMMAND, reg);
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-+
-+static void
-+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+ if (dev->devfn == PCI_DEVFN(0, 0) &&
-+ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-+
-+ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-+
-+ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
-+ }
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+ mdelay(10);
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
-+ ifx_pcie_rc_class_early_fixup);
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
-+ ifx_pcie_rc_class_early_fixup);
---- a/arch/mips/pci/fixup-lantiq.c
-+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -8,12 +8,18 @@
-
- #include <linux/of_irq.h>
- #include <linux/of_pci.h>
-+#include "ifxmips_pci_common.h"
-
- int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
- int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
-
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+ if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+ ifx_pcie_bios_plat_dev_init(dev);
-+#endif
-+
- if (ltq_pci_plat_arch_init)
- return ltq_pci_plat_arch_init(dev);
-
-@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
-
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+ if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+ return ifx_pcie_bios_map_irq(dev, slot, pin);
-+#endif
-+
- return of_irq_parse_and_map_pci(dev, slot, pin);
- }
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pci_common.h
-@@ -0,0 +1,57 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pci_common.h
-+** PROJECT : IFX UEIP
-+** MODULES : PCI subsystem
-+**
-+** DATE : 30 June 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 30 June,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+
-+#ifndef IFXMIPS_PCI_COMMON_H
-+#define IFXMIPS_PCI_COMMON_H
-+#include <linux/version.h>
-+/*!
-+ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration
-+ \brief PCI/PCIe common parts
-+*/
-+
-+/*!
-+ \defgroup IFX_PCI_COM_OS OS APIs
-+ \ingroup IFX_PCI_COM
-+ \brief PCI/PCIe bus driver OS interface functions
-+*/
-+/*!
-+ \file ifxmips_pci_common.h
-+ \ingroup IFX_PCI_COM
-+ \brief PCI/PCIe bus driver common OS header file
-+*/
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-+#define IFX_PCI_CONST
-+#else
-+#define IFX_PCI_CONST const
-+#endif
-+#ifdef CONFIG_IFX_PCI
-+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
-+#endif /* COFNIG_IFX_PCI */
-+
-+#ifdef CONFIG_PCIE_LANTIQ
-+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
-+#endif
-+
-+#endif /* IFXMIPS_PCI_COMMON_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -0,0 +1,1092 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009 Lei Chuanhua <chuanhua.lei@infineon.com>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <asm/paccess.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/module.h>
-+
-+#include "ifxmips_pcie.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/* Enable 32bit io due to its mem mapped io nature */
-+#define IFX_PCIE_ERROR_INT
-+#define IFX_PCIE_IO_32BIT
-+
-+#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
-+#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
-+#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
-+#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
-+#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
-+#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
-+#define SM(_v, _f) (((_v) << _f##_S) & (_f))
-+#define IFX_REG_SET_BIT(_f, _r) \
-+ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-+
-+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-+
-+static DEFINE_SPINLOCK(ifx_pcie_lock);
-+
-+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+
-+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-+ {
-+ .ir_irq = {
-+ .irq = IFX_PCIE_IR,
-+ .name = "ifx_pcie_rc0",
-+ },
-+
-+ .legacy_irq = {
-+ {
-+ .irq_bit = PCIE_IRN_INTA,
-+ .irq = IFX_PCIE_INTA,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTB,
-+ .irq = IFX_PCIE_INTB,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTC,
-+ .irq = IFX_PCIE_INTC,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTD,
-+ .irq = IFX_PCIE_INTD,
-+ },
-+ },
-+ },
-+
-+};
-+
-+void ifx_pcie_debug(const char *fmt, ...)
-+{
-+ static char buf[256] = {0}; /* XXX */
-+ va_list ap;
-+
-+ va_start(ap, fmt);
-+ vsnprintf(buf, sizeof(buf), fmt, ap);
-+ va_end(ap);
-+
-+ printk("%s", buf);
-+}
-+
-+
-+static inline int pcie_ltssm_enable(int pcie_port)
-+{
-+ int i;
-+
-+ /* Enable LTSSM */
-+ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port));
-+
-+ /* Wait for the link to come up */
-+ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
-+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING))
-+ return 0;
-+ udelay(10);
-+ }
-+
-+ printk("%s link timeout!!!!!\n", __func__);
-+ return -1;
-+}
-+
-+static inline void pcie_status_register_clear(int pcie_port)
-+{
-+ IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
-+ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_RSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_UES_R(pcie_port));
-+ IFX_REG_W32(0, PCIE_UEMR(pcie_port));
-+ IFX_REG_W32(0, PCIE_UESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_CESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_CEMR(pcie_port));
-+ IFX_REG_W32(0, PCIE_RESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
-+ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
-+ IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_QSR(pcie_port));
-+ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-+}
-+
-+static inline int ifx_pcie_link_up(int pcie_port)
-+{
-+ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-+}
-+
-+
-+static inline void pcie_mem_io_setup(int pcie_port)
-+{
-+ u32 reg;
-+ /*
-+ * BAR[0:1] readonly register
-+ * RC contains only minimal BARs for packets mapped to this device
-+ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
-+ * reside on the downstream side fo the bridge.
-+ */
-+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
-+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
-+
-+ IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-+
-+
-+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
-+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
-+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
-+ | PCIE_PMBL_64BIT_ADDR;
-+ IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
-+
-+ /* Must configure upper 32bit */
-+ IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
-+ IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
-+#else
-+ /* PCIe_PBML, same as MBML */
-+ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-+#endif
-+
-+ /* IO Address Range */
-+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
-+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
-+#ifdef IFX_PCIE_IO_32BIT
-+ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
-+#endif /* IFX_PCIE_IO_32BIT */
-+ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-+
-+#ifdef IFX_PCIE_IO_32BIT
-+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
-+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
-+ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-+
-+#endif /* IFX_PCIE_IO_32BIT */
-+}
-+
-+static inline void
-+pcie_device_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Device capability register, set up Maximum payload size */
-+ reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
-+ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
-+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-+
-+ /* Only available for EP */
-+ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
-+ IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-+
-+ /* Device control and status register */
-+ /* Set Maximum Read Request size for the device as a Requestor */
-+ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-+
-+ /*
-+ * Request size can be larger than the MPS used, but the completions returned
-+ * for the read will be bounded by the MPS size.
-+ * In our system, Max request size depends on AHB burst size. It is 64 bytes.
-+ * but we set it as 128 as minimum one.
-+ */
-+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
-+ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-+
-+ /* Enable relaxed ordering, no snoop, and all kinds of errors */
-+ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-+
-+ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-+}
-+
-+static inline void
-+pcie_link_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /*
-+ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
-+ * L0s is reported during link training via TS1 order set by N_FTS
-+ */
-+ reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
-+ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
-+ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
-+ IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-+
-+ /* Link control and status register */
-+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+ /* Link Enable, ASPM enabled */
-+ reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-+
-+#ifdef CONFIG_PCIEASPM
-+ /*
-+ * We use the same physical reference clock that the platform provides on the connector
-+ * It paved the way for ASPM to calculate the new exit Latency
-+ */
-+ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
-+ reg |= PCIE_LCTLSTS_COM_CLK_CFG;
-+ /*
-+ * We should disable ASPM by default except that we have dedicated power management support
-+ * Enable ASPM will cause the system hangup/instability, performance degration
-+ */
-+ reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-+#else
-+ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-+#endif /* CONFIG_PCIEASPM */
-+
-+ /*
-+ * The maximum size of any completion with data packet is bounded by the MPS setting
-+ * in device control register
-+ */
-+
-+ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
-+ reg &= ~ PCIE_LCTLSTS_RCB128;
-+
-+ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+}
-+
-+static inline void pcie_error_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
-+ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
-+ */
-+ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-+
-+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
-+ reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
-+ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
-+ IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-+
-+ /* Uncorrectable Error Severity Register, ALL errors are FATAL */
-+ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-+
-+ /* Correctable Error Mask Register, unmask <enable> all bits */
-+ reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
-+ reg &= ~PCIE_CORRECTABLE_ERR;
-+ IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-+
-+ /* Advanced Error Capabilities and Control Registr */
-+ reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
-+ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
-+ IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-+
-+ /* Root Error Command Register, Report all types of errors */
-+ reg = IFX_REG_R32(PCIE_RECR(pcie_port));
-+ reg |= PCIE_RECR_ERR_REPORT_EN;
-+ IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-+
-+ /* Clear the Root status register */
-+ reg = IFX_REG_R32(PCIE_RESR(pcie_port));
-+ IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-+}
-+
-+static inline void pcie_port_logic_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
-+ reg = IFX_REG_R32(PCIE_AFR(pcie_port));
-+ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
-+ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
-+ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
-+ /* L0s and L1 entry latency */
-+ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
-+ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
-+ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
-+ IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-+
-+
-+ /* Port Link Control Register */
-+ reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
-+ IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+
-+ /* Lane Skew Register */
-+ reg = IFX_REG_R32(PCIE_LSR(pcie_port));
-+ /* Enable ACK/NACK and FC */
-+ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
-+ IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-+
-+ /* Symbol Timer Register and Filter Mask Register 1 */
-+ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-+
-+ /* Default SKP interval is very accurate already, 5us */
-+ /* Enable IO/CFG transaction */
-+ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
-+ /* Disable FC WDT */
-+ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
-+ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-+
-+ /* Filter Masker Register 2 */
-+ reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
-+ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
-+ IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-+
-+ /* VC0 Completion Receive Queue Control Register */
-+ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
-+ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
-+ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
-+ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-+}
-+
-+static inline void pcie_rc_cfg_reg_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Disable LTSSM */
-+ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
-+
-+ pcie_mem_io_setup(pcie_port);
-+
-+ /* XXX, MSI stuff should only apply to EP */
-+ /* MSI Capability: Only enable 32-bit addresses */
-+ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
-+ reg &= ~PCIE_MCAPR_ADDR64_CAP;
-+
-+ reg |= PCIE_MCAPR_MSI_ENABLE;
-+
-+ /* Disable multiple message */
-+ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
-+ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-+
-+
-+ /* Enable PME, Soft reset enabled */
-+ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
-+ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
-+ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-+
-+ /* setup the bus */
-+ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
-+ IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-+
-+
-+ pcie_device_setup(pcie_port);
-+ pcie_link_setup(pcie_port);
-+ pcie_error_setup(pcie_port);
-+
-+ /* Root control and capabilities register */
-+ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
-+ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
-+ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-+
-+ /* Port VC Capability Register 2 */
-+ reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
-+ reg &= ~PCIE_PVC2_VC_ARB_WRR;
-+ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
-+ IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-+
-+ /* VC0 Resource Capability Register */
-+ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
-+ reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
-+ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-+
-+ pcie_port_logic_setup(pcie_port);
-+}
-+
-+static int ifx_pcie_wait_phy_link_up(int pcie_port)
-+{
-+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */
-+ int i;
-+
-+ /* Wait for PHY link is up */
-+ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
-+ if (ifx_pcie_link_up(pcie_port)) {
-+ break;
-+ }
-+ udelay(100);
-+ }
-+ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
-+ printk(KERN_ERR "%s timeout\n", __func__);
-+ return -1;
-+ }
-+
-+ /* Check data link up or not */
-+ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+ printk(KERN_ERR "%s DLL link is still down\n", __func__);
-+ return -1;
-+ }
-+
-+ /* Check Data link active or not */
-+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+ printk(KERN_ERR "%s DLL is not active\n", __func__);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static inline int pcie_app_loigc_setup(int pcie_port)
-+{
-+ /* supress ahb bus errrors */
-+ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-+
-+ /* Pull PCIe EP out of reset */
-+ pcie_device_rst_deassert(pcie_port);
-+
-+ /* Start LTSSM training between RC and EP */
-+ pcie_ltssm_enable(pcie_port);
-+
-+ /* Check PHY status after enabling LTSSM */
-+ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0)
-+ return -1;
-+
-+ return 0;
-+}
-+
-+/*
-+ * The numbers below are directly from the PCIe spec table 3-4/5.
-+ */
-+static inline void pcie_replay_time_update(int pcie_port)
-+{
-+ u32 reg;
-+ int nlw;
-+ int rtl;
-+
-+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
-+ switch (nlw) {
-+ case PCIE_MAX_LENGTH_WIDTH_X1:
-+ rtl = 1677;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X2:
-+ rtl = 867;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X4:
-+ rtl = 462;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X8:
-+ rtl = 258;
-+ break;
-+ default:
-+ rtl = 1677;
-+ break;
-+ }
-+ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
-+ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
-+ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
-+ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-+}
-+
-+/*
-+ * Table 359 Enhanced Configuration Address Mapping1)
-+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
-+ * Memory Address PCI Express Configuration Space
-+ * A[(20+n-1):20] Bus Number 1 < n < 8
-+ * A[19:15] Device Number
-+ * A[14:12] Function Number
-+ * A[11:8] Extended Register Number
-+ * A[7:2] Register Number
-+ * A[1:0] Along with size of the access, used to generate Byte Enables
-+ * For VR9, only the address bits [22:0] are mapped to the configuration space:
-+ * . Address bits [22:20] select the target bus (1-of-8)1)
-+ * . Address bits [19:15] select the target device (1-of-32) on the bus
-+ * . Address bits [14:12] select the target function (1-of-8) within the device.
-+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
-+ * . Address bits [1:0] define the start byte location within the selected dword.
-+ */
-+static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-+{
-+ u32 addr;
-+ u8 bus;
-+
-+ if (!bus_num) {
-+ /* type 0 */
-+ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
-+ } else {
-+ bus = bus_num;
-+ /* type 1, only support 8 buses */
-+ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
-+ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
-+ }
-+ return addr;
-+}
-+
-+static int pcie_valid_config(int pcie_port, int bus, int dev)
-+{
-+ /* RC itself */
-+ if ((bus == 0) && (dev == 0)) {
-+ return 1;
-+ }
-+
-+ /* No physical link */
-+ if (!ifx_pcie_link_up(pcie_port)) {
-+ return 0;
-+ }
-+
-+ /* Bus zero only has RC itself
-+ * XXX, check if EP will be integrated
-+ */
-+ if ((bus == 0) && (dev != 0)) {
-+ return 0;
-+ }
-+
-+ /* Maximum 8 buses supported for VRX */
-+ if (bus > 9) {
-+ return 0;
-+ }
-+
-+ /*
-+ * PCIe is PtP link, one bus only supports only one device
-+ * except bus zero and PCIe switch which is virtual bus device
-+ * The following two conditions really depends on the system design
-+ * and attached the device.
-+ * XXX, how about more new switch
-+ */
-+ if ((bus == 1) && (dev != 0)) {
-+ return 0;
-+ }
-+
-+ if ((bus >= 3) && (dev != 0)) {
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg)
-+{
-+ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
-+{
-+ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+u32 ifx_pcie_bus_enum_read_hack(int where, u32 value)
-+{
-+ u32 tvalue = value;
-+
-+ if (where == PCI_PRIMARY_BUS) {
-+ u8 primary, secondary, subordinate;
-+
-+ primary = tvalue & 0xFF;
-+ secondary = (tvalue >> 8) & 0xFF;
-+ subordinate = (tvalue >> 16) & 0xFF;
-+ primary += pcibios_1st_host_bus_nr();
-+ secondary += pcibios_1st_host_bus_nr();
-+ subordinate += pcibios_1st_host_bus_nr();
-+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+ }
-+ return tvalue;
-+}
-+
-+u32 ifx_pcie_bus_enum_write_hack(int where, u32 value)
-+{
-+ u32 tvalue = value;
-+
-+ if (where == PCI_PRIMARY_BUS) {
-+ u8 primary, secondary, subordinate;
-+
-+ primary = tvalue & 0xFF;
-+ secondary = (tvalue >> 8) & 0xFF;
-+ subordinate = (tvalue >> 16) & 0xFF;
-+ if (primary > 0 && primary != 0xFF) {
-+ primary -= pcibios_1st_host_bus_nr();
-+ }
-+
-+ if (secondary > 0 && secondary != 0xFF) {
-+ secondary -= pcibios_1st_host_bus_nr();
-+ }
-+ if (subordinate > 0 && subordinate != 0xFF) {
-+ subordinate -= pcibios_1st_host_bus_nr();
-+ }
-+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+ }
-+ else if (where == PCI_SUBORDINATE_BUS) {
-+ u8 subordinate = tvalue & 0xFF;
-+
-+ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
-+ tvalue = subordinate;
-+ }
-+ return tvalue;
-+}
-+
-+static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
-+ int where, int size, u32 *value)
-+{
-+ u32 data = 0;
-+ int bus_number = bus->number;
-+ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
-+ int ret = PCIBIOS_SUCCESSFUL;
-+ struct ifx_pci_controller *ctrl = bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ if (unlikely(size != 1 && size != 2 && size != 4)){
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+
-+ /* Make sure the address is aligned to natural boundary */
-+ if (unlikely(((size - 1) & where))) {
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+
-+ /*
-+ * If we are second controller, we have to cheat OS so that it assume
-+ * its bus number starts from 0 in host controller
-+ */
-+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+ /*
-+ * We need to force the bus number to be zero on the root
-+ * bus. Linux numbers the 2nd root bus to start after all
-+ * busses on root 0.
-+ */
-+ if (bus->parent == NULL) {
-+ bus_number = 0;
-+ }
-+
-+ /*
-+ * PCIe only has a single device connected to it. It is
-+ * always device ID 0. Don't bother doing reads for other
-+ * device IDs on the first segment.
-+ */
-+ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
-+ ret = PCIBIOS_FUNC_NOT_SUPPORTED;
-+ goto out;
-+ }
-+
-+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+ *value = 0xffffffff;
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ goto out;
-+ }
-+
-+ PCIE_IRQ_LOCK(ifx_pcie_lock);
-+ if (bus_number == 0) { /* RC itself */
-+ u32 t;
-+
-+ t = (where & ~3);
-+ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+ } else {
-+ u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+ data = ifx_pcie_cfg_rd(pcie_port, addr);
-+ #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = le32_to_cpu(data);
-+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ }
-+ /* To get a correct PCI topology, we have to restore the bus number to OS */
-+ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-+
-+ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+
-+ *value = (data >> (8 * (where & 3))) & mask[size & 7];
-+out:
-+ return ret;
-+}
-+
-+static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
-+{
-+ u32 shift;
-+ u32 tdata = data;
-+
-+ switch (size) {
-+ case 1:
-+ shift = (where & 0x3) << 3;
-+ tdata &= ~(0xffU << shift);
-+ tdata |= ((value & 0xffU) << shift);
-+ break;
-+ case 2:
-+ shift = (where & 3) << 3;
-+ tdata &= ~(0xffffU << shift);
-+ tdata |= ((value & 0xffffU) << shift);
-+ break;
-+ case 4:
-+ tdata = value;
-+ break;
-+ }
-+ return tdata;
-+}
-+
-+static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
-+ int where, int size, u32 value)
-+{
-+ int bus_number = bus->number;
-+ int ret = PCIBIOS_SUCCESSFUL;
-+ struct ifx_pci_controller *ctrl = bus->sysdata;
-+ int pcie_port = ctrl->port;
-+ u32 tvalue = value;
-+ u32 data;
-+
-+ /* Make sure the address is aligned to natural boundary */
-+ if (unlikely(((size - 1) & where))) {
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+ /*
-+ * If we are second controller, we have to cheat OS so that it assume
-+ * its bus number starts from 0 in host controller
-+ */
-+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+ /*
-+ * We need to force the bus number to be zero on the root
-+ * bus. Linux numbers the 2nd root bus to start after all
-+ * busses on root 0.
-+ */
-+ if (bus->parent == NULL) {
-+ bus_number = 0;
-+ }
-+
-+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ goto out;
-+ }
-+
-+ /* XXX, some PCIe device may need some delay */
-+ PCIE_IRQ_LOCK(ifx_pcie_lock);
-+
-+ /*
-+ * To configure the correct bus topology using native way, we have to cheat Os so that
-+ * it can configure the PCIe hardware correctly.
-+ */
-+ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-+
-+ if (bus_number == 0) { /* RC itself */
-+ u32 t;
-+
-+ t = (where & ~3);
-+ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+
-+ data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+
-+ ifx_pcie_rc_cfg_wr(pcie_port, t, data);
-+ } else {
-+ u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+ data = ifx_pcie_cfg_rd(pcie_port, addr);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = le32_to_cpu(data);
-+#endif
-+
-+ data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = cpu_to_le32(data);
-+#endif
-+ ifx_pcie_cfg_wr(pcie_port, addr, data);
-+ }
-+ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+out:
-+ return ret;
-+}
-+
-+static struct resource ifx_pcie_io_resource = {
-+ .name = "PCIe0 I/O space",
-+ .start = PCIE_IO_PHY_BASE,
-+ .end = PCIE_IO_PHY_END,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie_mem_resource = {
-+ .name = "PCIe0 Memory space",
-+ .start = PCIE_MEM_PHY_BASE,
-+ .end = PCIE_MEM_PHY_END,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct pci_ops ifx_pcie_ops = {
-+ .read = ifx_pcie_read_config,
-+ .write = ifx_pcie_write_config,
-+};
-+
-+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
-+ {
-+ .pcic = {
-+ .pci_ops = &ifx_pcie_ops,
-+ .mem_resource = &ifx_pcie_mem_resource,
-+ .io_resource = &ifx_pcie_io_resource,
-+ },
-+ .port = IFX_PCIE_PORT0,
-+ },
-+};
-+
-+#ifdef IFX_PCIE_ERROR_INT
-+
-+static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
-+{
-+ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
-+ int pcie_port = ctrl->port;
-+ u32 reg;
-+
-+ pr_debug("PCIe RC error intr %d\n", irq);
-+ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
-+ reg &= PCIE_RC_CORE_COMBINED_INT;
-+ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int
-+pcie_rc_core_int_init(int pcie_port)
-+{
-+ int ret;
-+
-+ /* Enable core interrupt */
-+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-+
-+ /* Clear it first */
-+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
-+ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0,
-+ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
-+ if (ret)
-+ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-+
-+ return ret;
-+}
-+#endif
-+
-+int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u32 irq_bit = 0;
-+ int irq = 0;
-+ struct ifx_pci_controller *ctrl = dev->bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-+
-+ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
-+ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
-+ return -1;
-+ }
-+
-+ /* Pin index so minus one */
-+ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
-+ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
-+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
-+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
-+ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
-+ return irq;
-+}
-+
-+int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+{
-+ u16 config;
-+#ifdef IFX_PCIE_ERROR_INT
-+ u32 dconfig;
-+ int pos;
-+#endif
-+
-+ /* Enable reporting System errors and parity errors on all devices */
-+ /* Enable parity checking and error reporting */
-+ pci_read_config_word(dev, PCI_COMMAND, &config);
-+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
-+ PCI_COMMAND_FAST_BACK*/;
-+ pci_write_config_word(dev, PCI_COMMAND, config);
-+
-+ if (dev->subordinate) {
-+ /* Set latency timers on sub bridges */
-+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
-+ /* More bridge error detection */
-+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-+ }
-+#ifdef IFX_PCIE_ERROR_INT
-+ /* Enable the PCIe normal error reporting */
-+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-+ if (pos) {
-+
-+ /* Disable system error generation in response to error messages */
-+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
-+ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
-+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-+
-+ /* Clear PCIE Capability's Device Status */
-+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
-+ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-+
-+ /* Update Device Control */
-+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-+ /* Correctable Error Reporting */
-+ config |= PCI_EXP_DEVCTL_CERE;
-+ /* Non-Fatal Error Reporting */
-+ config |= PCI_EXP_DEVCTL_NFERE;
-+ /* Fatal Error Reporting */
-+ config |= PCI_EXP_DEVCTL_FERE;
-+ /* Unsupported Request */
-+ config |= PCI_EXP_DEVCTL_URRE;
-+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-+ }
-+
-+ /* Find the Advanced Error Reporting capability */
-+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-+ if (pos) {
-+ /* Clear Uncorrectable Error Status */
-+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
-+ /* Enable reporting of all uncorrectable errors */
-+ /* Uncorrectable Error Mask - turned on bits disable errors */
-+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-+ /*
-+ * Leave severity at HW default. This only controls if
-+ * errors are reported as uncorrectable or
-+ * correctable, not if the error is reported.
-+ */
-+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-+ /* Clear Correctable Error Status */
-+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-+ /* Enable reporting of all correctable errors */
-+ /* Correctable Error Mask - turned on bits disable errors */
-+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-+ /* Advanced Error Capabilities */
-+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-+ /* ECRC Generation Enable */
-+ if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
-+ dconfig |= PCI_ERR_CAP_ECRC_GENE;
-+ }
-+ /* ECRC Check Enable */
-+ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
-+ dconfig |= PCI_ERR_CAP_ECRC_CHKE;
-+ }
-+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-+
-+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-+ /* Enable Root Port's interrupt in response to error messages */
-+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-+ PCI_ERR_ROOT_CMD_COR_EN |
-+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
-+ PCI_ERR_ROOT_CMD_FATAL_EN);
-+ /* Clear the Root status register */
-+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-+ }
-+#endif /* IFX_PCIE_ERROR_INT */
-+ /* WAR, only 128 MRRS is supported, force all EPs to support this value */
-+ pcie_set_readrq(dev, 128);
-+ return 0;
-+}
-+
-+static int
-+pcie_rc_initialize(int pcie_port)
-+{
-+ int i;
-+#define IFX_PCIE_PHY_LOOP_CNT 5
-+
-+ pcie_rcu_endian_setup(pcie_port);
-+
-+ pcie_ep_gpio_rst_init(pcie_port);
-+
-+ /*
-+ * XXX, PCIe elastic buffer bug will cause not to be detected. One more
-+ * reset PCIe PHY will solve this issue
-+ */
-+ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
-+ /* Disable PCIe PHY Analog part for sanity check */
-+ pcie_phy_pmu_disable(pcie_port);
-+
-+ pcie_phy_rst_assert(pcie_port);
-+ pcie_phy_rst_deassert(pcie_port);
-+
-+ /* Make sure PHY PLL is stable */
-+ udelay(20);
-+
-+ /* PCIe Core reset enabled, low active, sw programmed */
-+ pcie_core_rst_assert(pcie_port);
-+
-+ /* Put PCIe EP in reset status */
-+ pcie_device_rst_assert(pcie_port);
-+
-+ /* PCI PHY & Core reset disabled, high active, sw programmed */
-+ pcie_core_rst_deassert(pcie_port);
-+
-+ /* Already in a quiet state, program PLL, enable PHY, check ready bit */
-+ pcie_phy_clock_mode_setup(pcie_port);
-+
-+ /* Enable PCIe PHY and Clock */
-+ pcie_core_pmu_setup(pcie_port);
-+
-+ /* Clear status registers */
-+ pcie_status_register_clear(pcie_port);
-+
-+#ifdef CONFIG_PCI_MSI
-+ pcie_msi_init(pcie_port);
-+#endif /* CONFIG_PCI_MSI */
-+ pcie_rc_cfg_reg_setup(pcie_port);
-+
-+ /* Once link is up, break out */
-+ if (pcie_app_loigc_setup(pcie_port) == 0)
-+ break;
-+ }
-+ if (i >= IFX_PCIE_PHY_LOOP_CNT) {
-+ printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-+ return -EIO;
-+ }
-+ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
-+ pcie_replay_time_update(pcie_port);
-+ return 0;
-+}
-+
-+static int __init ifx_pcie_bios_init(void)
-+{
-+ void __iomem *io_map_base;
-+ int pcie_port;
-+ int startup_port;
-+
-+ /* Enable AHB Master/ Slave */
-+ pcie_ahb_pmu_setup();
-+
-+ startup_port = IFX_PCIE_PORT0;
-+
-+ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
-+ if (pcie_rc_initialize(pcie_port) == 0) {
-+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n",
-+ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
-+ /* Otherwise, warning will pop up */
-+ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
-+ if (io_map_base == NULL) {
-+ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
-+ return -ENOMEM;
-+ }
-+ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+
-+ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-+ /* XXX, clear error status */
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n",
-+ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource,
-+ &ifx_pcie_controller[pcie_port].pcic.io_resource);
-+
-+ #ifdef IFX_PCIE_ERROR_INT
-+ pcie_rc_core_int_init(pcie_port);
-+ #endif /* IFX_PCIE_ERROR_INT */
-+ }
-+ }
-+
-+ return 0;
-+}
-+arch_initcall(ifx_pcie_bios_init);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
-+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.h
-@@ -0,0 +1,135 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie.h
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_H
-+#define IFXMIPS_PCIE_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include "ifxmips_pci_common.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/*!
-+ \defgroup IFX_PCIE PCI Express bus driver module
-+ \brief PCI Express IP module support VRX200
-+*/
-+
-+/*!
-+ \defgroup IFX_PCIE_OS OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie.h
-+ \ingroup IFX_PCIE
-+ \brief header file for PCIe module common header file
-+*/
-+#define PCIE_IRQ_LOCK(lock) do { \
-+ unsigned long flags; \
-+ spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock) \
-+ spin_unlock_irqrestore(&(lock), flags); \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI 0x00000001
-+#define PCIE_MSG_ISR 0x00000002
-+#define PCIE_MSG_FIXUP 0x00000004
-+#define PCIE_MSG_READ_CFG 0x00000008
-+#define PCIE_MSG_WRITE_CFG 0x00000010
-+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG 0x00000020
-+#define PCIE_MSG_INIT 0x00000040
-+#define PCIE_MSG_ERR 0x00000080
-+#define PCIE_MSG_PHY 0x00000100
-+#define PCIE_MSG_ANY 0x000001ff
-+
-+#define IFX_PCIE_PORT0 0
-+#define IFX_PCIE_PORT1 1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR 2
-+#else
-+#define IFX_PCIE_CORE_NR 1
-+#endif
-+
-+#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
-+ ifx_pcie_debug((_fmt), ##args); \
-+} while (0)
-+
-+#define INLINE
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) \
-+ do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+ struct pci_controller pcic;
-+
-+ /* RC specific, per host bus information */
-+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+ const unsigned int irq;
-+ const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+ const u32 irq_bit;
-+ const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+ ifx_pcie_ir_irq_t ir_irq;
-+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+#define CONFIG_VR9
-+
-+#ifdef CONFIG_VR9
-+#include "ifxmips_pcie_vr9.h"
-+#elif defined (CONFIG_AR10)
-+#include "ifxmips_pcie_ar10.h"
-+#else
-+#error "PCIE: platform not defined"
-+#endif /* CONFIG_VR9 */
-+
-+#endif /* IFXMIPS_PCIE_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_ar10.h
-@@ -0,0 +1,290 @@
-+/****************************************************************************
-+ Copyright (c) 2010
-+ Lantiq Deutschland GmbH
-+ Am Campeon 3; 85579 Neubiberg, Germany
-+
-+ For licensing information, see the file 'LICENSE' in the root folder of
-+ this software module.
-+
-+ *****************************************************************************/
-+/*!
-+ \file ifxmips_pcie_ar10.h
-+ \ingroup IFX_PCIE
-+ \brief PCIe RC driver ar10 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_AR10_H
-+#define IFXMIPS_PCIE_AR10_H
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+/* Project header file */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_pmu.h>
-+#include <asm/ifx/ifx_gpio.h>
-+#include <asm/ifx/ifx_ebu_led.h>
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+ ifx_ebu_led_enable();
-+ if (pcie_port == 0) {
-+ ifx_ebu_led_set_data(11, 1);
-+ }
-+ else {
-+ ifx_ebu_led_set_data(12, 1);
-+ }
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+ /* XXX, moved to CGU to control AHBM */
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+ /* Inbound, big endian */
-+ reg |= IFX_RCU_BE_AHB4S;
-+ if (pcie_port == 0) {
-+ reg |= IFX_RCU_BE_PCIE0M;
-+
-+ #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ /* Outbound, software swap needed */
-+ reg |= IFX_RCU_BE_AHB3M;
-+ reg &= ~IFX_RCU_BE_PCIE0S;
-+ #else
-+ /* Outbound little endian */
-+ reg &= ~IFX_RCU_BE_AHB3M;
-+ reg &= ~IFX_RCU_BE_PCIE0S;
-+ #endif
-+ }
-+ else {
-+ reg |= IFX_RCU_BE_PCIE1M;
-+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+ /* Outbound, software swap needed */
-+ reg |= IFX_RCU_BE_AHB3M;
-+ reg &= ~IFX_RCU_BE_PCIE1S;
-+ #else
-+ /* Outbound little endian */
-+ reg &= ~IFX_RCU_BE_AHB3M;
-+ reg &= ~IFX_RCU_BE_PCIE1S;
-+ #endif
-+ }
-+
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+ if (pcie_port == 0) { /* XXX, should use macro*/
-+ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+ else {
-+ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+ if (pcie_port == 0) { /* XXX, should use macro*/
-+ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+ }
-+ else {
-+ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+ }
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+ if (pcie_port == 0) {
-+ /* Config AHB->PCIe and PDI endianness */
-+ reg |= IFX_RCU_BE_PCIE0_PDI;
-+ }
-+ else {
-+ /* Config AHB->PCIe and PDI endianness */
-+ reg |= IFX_RCU_BE_PCIE1_PDI;
-+ }
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+ if (pcie_port == 0) {
-+ /* Enable PDI to access PCIe PHY register */
-+ PDI0_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+ else {
-+ PDI1_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+ /* Reset Core, bit 22 */
-+ if (pcie_port == 0) {
-+ reg |= 0x00400000;
-+ }
-+ else {
-+ reg |= 0x08000000; /* Bit 27 */
-+ }
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ if (pcie_port == 0) {
-+ reg &= ~0x00400000; /* bit 22 */
-+ }
-+ else {
-+ reg &= ~0x08000000; /* Bit 27 */
-+ }
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ if (pcie_port == 0) {
-+ reg |= 0x00001000; /* Bit 12 */
-+ }
-+ else {
-+ reg |= 0x00002000; /* Bit 13 */
-+ }
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ if (pcie_port == 0) {
-+ reg &= ~0x00001000; /* Bit 12 */
-+ }
-+ else {
-+ reg &= ~0x00002000; /* Bit 13 */
-+ }
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+ if (pcie_port == 0) {
-+ ifx_ebu_led_set_data(11, 0);
-+ }
-+ else {
-+ ifx_ebu_led_set_data(12, 0);
-+ }
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+ mdelay(100);
-+ if (pcie_port == 0) {
-+ ifx_ebu_led_set_data(11, 1);
-+ }
-+ else {
-+ ifx_ebu_led_set_data(12, 1);
-+ }
-+ ifx_ebu_led_disable();
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+ if (pcie_port == 0) {
-+ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+ else {
-+ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+ pcie_msi_pic_init(pcie_port);
-+ if (pcie_port == 0) {
-+ MSI0_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+ else {
-+ MSI1_PMU_SETUP(IFX_PMU_ENABLE);
-+ }
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+ u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+ if (pcibios_host_nr() > 1) {
-+ tbus_number -= pcibios_1st_host_bus_nr();
-+ }
-+ }
-+#endif /* CONFIG_IFX_PCI */
-+ return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+ struct pci_dev *pdev;
-+ u32 tvalue = value;
-+
-+ /* Sanity check */
-+ pdev = pci_get_slot(bus, devfn);
-+ if (pdev == NULL) {
-+ return tvalue;
-+ }
-+
-+ /* Only care about PCI bridge */
-+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+ return tvalue;
-+ }
-+
-+ if (read) { /* Read hack */
-+ #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+ }
-+ }
-+ #endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+ }
-+ else { /* Write hack */
-+ #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+ }
-+ }
-+ #endif
-+ }
-+ return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_AR10_H */
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_msi.c
-@@ -0,0 +1,392 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_msi.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCI MSI sub module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe MSI Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Date $Author $Comment
-+** 02 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_MSI MSI OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_msi.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe MSI OS interface file
-+*/
-+
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/pci.h>
-+#include <linux/msi.h>
-+#include <linux/module.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/irq.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+#define IFX_MSI_IRQ_NUM 16
-+
-+enum {
-+ IFX_PCIE_MSI_IDX0 = 0,
-+ IFX_PCIE_MSI_IDX1,
-+ IFX_PCIE_MSI_IDX2,
-+ IFX_PCIE_MSI_IDX3,
-+};
-+
-+typedef struct ifx_msi_irq_idx {
-+ const int irq;
-+ const int idx;
-+}ifx_msi_irq_idx_t;
-+
-+struct ifx_msi_pic {
-+ volatile u32 pic_table[IFX_MSI_IRQ_NUM];
-+ volatile u32 pic_endian; /* 0x40 */
-+};
-+typedef struct ifx_msi_pic *ifx_msi_pic_t;
-+
-+typedef struct ifx_msi_irq {
-+ const volatile ifx_msi_pic_t msi_pic_p;
-+ const u32 msi_phy_base;
-+ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
-+ /*
-+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
-+ * in use.
-+ */
-+ u16 msi_free_irq_bitmask;
-+
-+ /*
-+ * Each bit in msi_multiple_irq_bitmask tells that the device using
-+ * this bit in msi_free_irq_bitmask is also using the next bit. This
-+ * is used so we can disable all of the MSI interrupts when a device
-+ * uses multiple.
-+ */
-+ u16 msi_multiple_irq_bitmask;
-+}ifx_msi_irq_t;
-+
-+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
-+ {
-+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
-+ .msi_phy_base = PCIE_MSI_PHY_BASE,
-+ .msi_irq_idx = {
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ },
-+ .msi_free_irq_bitmask = 0,
-+ .msi_multiple_irq_bitmask= 0,
-+ },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ {
-+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
-+ .msi_phy_base = PCIE1_MSI_PHY_BASE,
-+ .msi_irq_idx = {
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ },
-+ .msi_free_irq_bitmask = 0,
-+ .msi_multiple_irq_bitmask= 0,
-+
-+ },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+/*
-+ * This lock controls updates to msi_free_irq_bitmask,
-+ * msi_multiple_irq_bitmask and pic register settting
-+ */
-+static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-+
-+void pcie_msi_pic_init(int pcie_port)
-+{
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
-+ spin_unlock(&ifx_pcie_msi_lock);
-+}
-+
-+/**
-+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+ * \brief Called when a driver request MSI interrupts instead of the
-+ * legacy INT A-D. This routine will allocate multiple interrupts
-+ * for MSI devices that support them. A device can override this by
-+ * programming the MSI control bits [6:4] before calling
-+ * pci_enable_msi().
-+ *
-+ * \param[in] pdev Device requesting MSI interrupts
-+ * \param[in] desc MSI descriptor
-+ *
-+ * \return -EINVAL Invalid pcie root port or invalid msi bit
-+ * \return 0 OK
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+int
-+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+{
-+ int irq, pos;
-+ u16 control;
-+ int irq_idx;
-+ int irq_step;
-+ int configured_private_bits;
-+ int request_private_bits;
-+ struct msi_msg msg;
-+ u16 search_mask;
-+ struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-+
-+ /* XXX, skip RC MSI itself */
-+ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Read the MSI config to figure out how many IRQs this device
-+ * wants. Most devices only want 1, which will give
-+ * configured_private_bits and request_private_bits equal 0.
-+ */
-+ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-+
-+ /*
-+ * If the number of private bits has been configured then use
-+ * that value instead of the requested number. This gives the
-+ * driver the chance to override the number of interrupts
-+ * before calling pci_enable_msi().
-+ */
-+ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
-+ if (configured_private_bits == 0) {
-+ /* Nothing is configured, so use the hardware requested size */
-+ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-+ }
-+ else {
-+ /*
-+ * Use the number of configured bits, assuming the
-+ * driver wanted to override the hardware request
-+ * value.
-+ */
-+ request_private_bits = configured_private_bits;
-+ }
-+
-+ /*
-+ * The PCI 2.3 spec mandates that there are at most 32
-+ * interrupts. If this device asks for more, only give it one.
-+ */
-+ if (request_private_bits > 5) {
-+ request_private_bits = 0;
-+ }
-+again:
-+ /*
-+ * The IRQs have to be aligned on a power of two based on the
-+ * number being requested.
-+ */
-+ irq_step = (1 << request_private_bits);
-+
-+ /* Mask with one bit for each IRQ */
-+ search_mask = (1 << irq_step) - 1;
-+
-+ /*
-+ * We're going to search msi_free_irq_bitmask_lock for zero
-+ * bits. This represents an MSI interrupt number that isn't in
-+ * use.
-+ */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
-+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
-+ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos;
-+ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
-+ break;
-+ }
-+ }
-+ spin_unlock(&ifx_pcie_msi_lock);
-+
-+ /* Make sure the search for available interrupts didn't fail */
-+ if (pos >= IFX_MSI_IRQ_NUM) {
-+ if (request_private_bits) {
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
-+ "interrupts, trying just one", __func__, 1 << request_private_bits);
-+ request_private_bits = 0;
-+ goto again;
-+ }
-+ else {
-+ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
-+ return -EINVAL;
-+ }
-+ }
-+ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
-+ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-+
-+ /*
-+ * Initialize MSI. This has to match the memory-write endianess from the device
-+ * Address bits [23:12]
-+ */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
-+ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
-+ SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+
-+ /* Enable this entry */
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
-+ spin_unlock(&ifx_pcie_msi_lock);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
-+ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-+
-+ /* Update the number of IRQs the device has available to it */
-+ control &= ~PCI_MSI_FLAGS_QSIZE;
-+ control |= (request_private_bits << 4);
-+ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-+
-+ set_irq_msi(irq, desc);
-+ msg.address_hi = 0x0;
-+ msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
-+ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-+
-+ write_msi_msg(irq, &msg);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+ return 0;
-+}
-+
-+static int
-+pcie_msi_irq_to_port(unsigned int irq, int *port)
-+{
-+ int ret = 0;
-+
-+ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
-+ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
-+ *port = IFX_PCIE_PORT0;
-+ }
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
-+ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
-+ *port = IFX_PCIE_PORT1;
-+ }
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+ else {
-+ printk(KERN_ERR "%s: Attempted to teardown illegal "
-+ "MSI interrupt (%d)\n", __func__, irq);
-+ ret = -EINVAL;
-+ }
-+ return ret;
-+}
-+
-+/**
-+ * \fn void arch_teardown_msi_irq(unsigned int irq)
-+ * \brief Called when a device no longer needs its MSI interrupts. All
-+ * MSI interrupts for the device are freed.
-+ *
-+ * \param irq The devices first irq number. There may be multple in sequence.
-+ * \return none
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+void
-+arch_teardown_msi_irq(unsigned int irq)
-+{
-+ int pos;
-+ int number_irqs;
-+ u16 bitmask;
-+ int pcie_port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-+
-+ BUG_ON(irq > INT_NUM_IM4_IRL31);
-+
-+ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
-+ return;
-+ }
-+
-+ /* Shift the mask to the correct bit location, not always correct
-+ * Probally, the first match will be chosen.
-+ */
-+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
-+ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq)
-+ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
-+ break;
-+ }
-+ }
-+ if (pos >= IFX_MSI_IRQ_NUM) {
-+ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
-+ return;
-+ }
-+ spin_lock(&ifx_pcie_msi_lock);
-+ /* Disable this entry */
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
-+ spin_unlock(&ifx_pcie_msi_lock);
-+ /*
-+ * Count the number of IRQs we need to free by looking at the
-+ * msi_multiple_irq_bitmask. Each bit set means that the next
-+ * IRQ is also owned by this device.
-+ */
-+ number_irqs = 0;
-+ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) &&
-+ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
-+ number_irqs++;
-+ }
-+ number_irqs++;
-+
-+ /* Mask with one bit for each IRQ */
-+ bitmask = (1 << number_irqs) - 1;
-+
-+ bitmask <<= pos;
-+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
-+ printk(KERN_ERR "%s: Attempted to teardown MSI "
-+ "interrupt (%d) not in use\n", __func__, irq);
-+ return;
-+ }
-+ /* Checks are done, update the in use bitmask */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
-+ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
-+ spin_unlock(&ifx_pcie_msi_lock);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_phy.c
-@@ -0,0 +1,478 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_phy.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe PHY sub module
-+**
-+** DATE : 14 May 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 14 May,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_phy.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe PHY PLL register programming source file
-+*/
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/paccess.h>
-+#include <linux/delay.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+/* PCIe PDI only supports 16 bit operation */
-+
-+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
-+ ((*(volatile u16 *) (__addr)) = (__data))
-+
-+#define IFX_PCIE_PHY_REG_READ16(__addr) \
-+ (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG16(__addr) \
-+ (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
-+ u16 read_data; \
-+ u16 write_data; \
-+ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \
-+ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
-+ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \
-+} while (0)
-+
-+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-+
-+//#define IFX_PCI_PHY_REG_DUMP
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+static void
-+pcie_phy_reg_dump(int pcie_port)
-+{
-+ printk("PLL REGFILE\n");
-+ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
-+ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
-+ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
-+ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
-+
-+ printk("TX1 REGFILE\n");
-+ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
-+ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
-+ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
-+ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
-+
-+ printk("TX2 REGFILE\n");
-+ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
-+ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
-+ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
-+
-+ printk("RX1 REGFILE\n");
-+ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
-+ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
-+ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
-+ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
-+ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
-+}
-+#endif /* IFX_PCI_PHY_REG_DUMP */
-+
-+static void
-+pcie_phy_comm_setup(int pcie_port)
-+{
-+ /* PLL Setting */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+ /* increase the bias reference voltage */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+ /* Endcnt */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+ /* force */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+ /* ctrl_lim */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+ /* ctrl */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+ /* RTERM*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+ /* Improved 100MHz clock output */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+ /* Reduced CDR BW to avoid glitches */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+}
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+static void
-+pcie_phy_36mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-+static void
-+pcie_phy_36mhz_ssc_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+ /* PLL Setting */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+ /* Increase the bias reference voltage */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+ /* Endcnt */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+ /* Force */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+ /* Predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+ /* ctrl_lim */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+ /* ctrl */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+ /* RTERM*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-+
-+ /* improved 100MHz clock output */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+ /* reduced CDR BW to avoid glitches */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-+static void
-+pcie_phy_25mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-+
-+ /* en_ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-+static void
-+pcie_phy_100mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-+
-+static int
-+pcie_phy_wait_startup_ready(int pcie_port)
-+{
-+ int i;
-+
-+ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
-+ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
-+ break;
-+ }
-+ udelay(10);
-+ }
-+ if (i >= IFX_PCIE_PLL_TIMEOUT) {
-+ printk(KERN_ERR "%s PLL Link timeout\n", __func__);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void
-+pcie_phy_load_enable(int pcie_port, int slice)
-+{
-+ /* Set the load_en of tx/rx slice to '1' */
-+ switch (slice) {
-+ case 1:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
-+ break;
-+ case 2:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
-+ break;
-+ case 3:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
-+ break;
-+ }
-+}
-+
-+static void
-+pcie_phy_load_disable(int pcie_port, int slice)
-+{
-+ /* set the load_en of tx/rx slice to '0' */
-+ switch (slice) {
-+ case 1:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
-+ break;
-+ case 2:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
-+ break;
-+ case 3:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
-+ break;
-+ }
-+}
-+
-+static void
-+pcie_phy_load_war(int pcie_port)
-+{
-+ int slice;
-+
-+ for (slice = 1; slice < 4; slice++) {
-+ pcie_phy_load_enable(pcie_port, slice);
-+ udelay(1);
-+ pcie_phy_load_disable(pcie_port, slice);
-+ }
-+}
-+
-+static void
-+pcie_phy_tx2_modulation(int pcie_port)
-+{
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
-+ mdelay(1);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void
-+pcie_phy_tx1_modulation(int pcie_port)
-+{
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
-+ mdelay(1);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void
-+pcie_phy_tx_modulation_war(int pcie_port)
-+{
-+ int i;
-+
-+#define PCIE_PHY_MODULATION_NUM 5
-+ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
-+ pcie_phy_tx2_modulation(pcie_port);
-+ pcie_phy_tx1_modulation(pcie_port);
-+ }
-+#undef PCIE_PHY_MODULATION_NUM
-+}
-+
-+void
-+pcie_phy_clock_mode_setup(int pcie_port)
-+{
-+ pcie_pdi_big_endian(pcie_port);
-+
-+ /* Enable PDI to access PCIe PHY register */
-+ pcie_pdi_pmu_enable(pcie_port);
-+
-+ /* Configure PLL and PHY clock */
-+ pcie_phy_comm_setup(pcie_port);
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+ pcie_phy_36mhz_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
-+ pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
-+ pcie_phy_25mhz_mode_setup(pcie_port);
-+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
-+ pcie_phy_100mhz_mode_setup(pcie_port);
-+#else
-+ #error "PCIE PHY Clock Mode must be chosen first!!!!"
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+ /* Enable PCIe PHY and make PLL setting take effect */
-+ pcie_phy_pmu_enable(pcie_port);
-+
-+ /* Check if we are in startup_ready status */
-+ pcie_phy_wait_startup_ready(pcie_port);
-+
-+ pcie_phy_load_war(pcie_port);
-+
-+ /* Apply TX modulation workarounds */
-+ pcie_phy_tx_modulation_war(pcie_port);
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.c
-@@ -0,0 +1,176 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_pm.c
-+** PROJECT : IFX UEIP
-+** MODULES : PCIE Root Complex Driver
-+**
-+** DATE : 21 Dec 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIE Root Complex Driver Power Managment
-+** COPYRIGHT : Copyright (c) 2009
-+** Lantiq Deutschland GmbH
-+** Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 21 Dec,2009 Lei Chuanhua First UEIP release
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_PM Power Management functions
-+ \ingroup IFX_PCIE
-+ \brief IFX PCIE Root Complex Driver power management functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_pm.c
-+ \ingroup IFX_PCIE
-+ \brief source file for PCIE Root Complex Driver Power Management
-+*/
-+
-+#ifndef EXPORT_SYMTAB
-+#define EXPORT_SYMTAB
-+#endif
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/system.h>
-+
-+/* Project header */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/ifx_pmcu.h>
-+#include "ifxmips_pcie_pm.h"
-+
-+/**
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+ * \brief the callback function to request pmcu state in the power management hardware-dependent module
-+ *
-+ * \param pmcuState This parameter is a PMCU state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t
-+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+{
-+ switch(pmcuState)
-+ {
-+ case IFX_PMCU_STATE_D0:
-+ return IFX_PMCU_RETURN_SUCCESS;
-+ case IFX_PMCU_STATE_D1: // Not Applicable
-+ return IFX_PMCU_RETURN_DENIED;
-+ case IFX_PMCU_STATE_D2: // Not Applicable
-+ return IFX_PMCU_RETURN_DENIED;
-+ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
-+ return IFX_PMCU_RETURN_SUCCESS;
-+ default:
-+ return IFX_PMCU_RETURN_DENIED;
-+ }
-+}
-+
-+/**
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+ * \brief the callback function to get pmcu state in the power management hardware-dependent module
-+
-+ * \param pmcuState Pointer to return power state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t
-+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+{
-+ return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ *
-+ * \param pmcuModule Module
-+ * \param newState New state
-+ * \param oldState Old state
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t
-+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+ return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ *
-+ * \param pmcuModule Module
-+ * \param newState New state
-+ * \param oldState Old state
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t
-+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+ return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn static void ifx_pcie_pmcu_init(void)
-+ * \brief Register with central PMCU module
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_init(void)
-+{
-+ IFX_PMCU_REGISTER_t pmcuRegister;
-+
-+ /* XXX, hook driver context */
-+
-+ /* State function register */
-+ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
-+ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+ pmcuRegister.pmcuModuleNr = 0;
-+ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
-+ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
-+ pmcuRegister.pre = ifx_pcie_pmcu_prechange;
-+ pmcuRegister.post= ifx_pcie_pmcu_postchange;
-+ ifx_pmcu_register(&pmcuRegister);
-+}
-+
-+/**
-+ * \fn static void ifx_pcie_pmcu_exit(void)
-+ * \brief Unregister with central PMCU module
-+ *
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_exit(void)
-+{
-+ IFX_PMCU_REGISTER_t pmcuUnRegister;
-+
-+ /* XXX, hook driver context */
-+
-+ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+ pmcuUnRegister.pmcuModuleNr = 0;
-+ ifx_pmcu_unregister(&pmcuUnRegister);
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.h
-@@ -0,0 +1,36 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_pm.h
-+** PROJECT : IFX UEIP
-+** MODULES : PCIe Root Complex Driver
-+**
-+** DATE : 21 Dec 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver Power Managment
-+** COPYRIGHT : Copyright (c) 2009
-+** Lantiq Deutschland GmbH
-+** Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 21 Dec,2009 Lei Chuanhua First UEIP release
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_pm.h
-+ \ingroup IFX_PCIE
-+ \brief header file for PCIe Root Complex Driver Power Management
-+*/
-+
-+#ifndef IFXMIPS_PCIE_PM_H
-+#define IFXMIPS_PCIE_PM_H
-+
-+void ifx_pcie_pmcu_init(void);
-+void ifx_pcie_pmcu_exit(void);
-+
-+#endif /* IFXMIPS_PCIE_PM_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_reg.h
-@@ -0,0 +1,1001 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_reg.h
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE 0x1D000000UL
-+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE 0x1C000000UL
-+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE 0x1D800000UL
-+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE 0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE 0x1F106800UL
-+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE 0x400
-+
-+#define PCIE1_CFG_PHY_BASE 0x19000000UL
-+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE 0x18000000UL
-+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE 0x19800000UL
-+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE 0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE 0x1F700400UL
-+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE 0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S 9
-+
-+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+ PCIE_RC_DR_D0 = 0,
-+ PCIE_RC_DR_D1, /* Not supported */
-+ PCIE_RC_DR_D2, /* Not supported */
-+ PCIE_RC_DR_D3,
-+ PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S 4
-+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S 9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S 0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S 0
-+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S 5
-+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S 12
-+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S 18
-+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S 22
-+
-+/* Format Definition */
-+enum {
-+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
-+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
-+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
-+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+ PCIE_VM_MSG_TC0 = 0,
-+ PCIE_VM_MSG_TC1,
-+ PCIE_VM_MSG_TC2,
-+ PCIE_VM_MSG_TC3,
-+ PCIE_VM_MSG_TC4,
-+ PCIE_VM_MSG_TC5,
-+ PCIE_VM_MSG_TC6,
-+ PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
-+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
-+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
-+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN 0
-+#define PCIE_VM_MSG_LEN_MAX 1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
-+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S 16
-+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S 24
-+
-+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S 3
-+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S 5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S 0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA 0x00002000 /* INTA */
-+#define PCIE_IRN_INTB 0x00004000 /* INTB */
-+#define PCIE_IRN_INTC 0x00008000 /* INTC */
-+#define PCIE_IRN_INTD 0x00010000 /* INTD */
-+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
-+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
-+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S 16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S 4
-+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR 0x00000001
-+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S 4
-+#define PCIE_PMBL_E64MA 0x00010000
-+#define PCIE_PMBL_END_ADDR 0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S 20
-+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
-+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
-+
-+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S 0
-+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S 8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+ PCIE_INTRBCTRL_INT_NON = 0,
-+ PCIE_INTRBCTRL_INTA,
-+ PCIE_INTRBCTRL_INTB,
-+ PCIE_INTRBCTRL_INTC,
-+ PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S 0
-+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S 0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
-+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
-+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
-+#define PCIE_MD_DATA_S 0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S 0
-+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S 8
-+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S 16
-+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S 20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S 25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
-+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S 3
-+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S 6
-+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S 9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+ PCIE_MAX_PAYLOAD_128 = 0,
-+ PCIE_MAX_PAYLOAD_256,
-+ PCIE_MAX_PAYLOAD_512,
-+ PCIE_MAX_PAYLOAD_1024,
-+ PCIE_MAX_PAYLOAD_2048,
-+ PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
-+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+ PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S 0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
-+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
-+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
-+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
-+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S 24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+ PCIE_ASPM_RES0 = 0,
-+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
-+ PCIE_ASPM_RES1,
-+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
-+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
-+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
-+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
-+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
-+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
-+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
-+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
-+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
-+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
-+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
-+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
-+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
-+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
-+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
-+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S 16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S 0
-+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
-+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S 0
-+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S 16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
-+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
-+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
-+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
-+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S 0
-+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S 27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S 0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
-+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S 8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN 0
-+#define PCIE_EXT_VC_CNT_MAX 7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
-+
-+/* Port VC Control and Status Register */
-+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
-+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S 24
-+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S 0
-+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
-+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S 16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
-+#define PCIE_AFR_AF_S 0
-+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S 8
-+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S 16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
-+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
-+#define PCIE_AFR_FTS_NUM_DEFAULT 32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
-+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S 16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S 0
-+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S 0
-+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S 8
-+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S 14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
-+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S 28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S 0
-+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
-+
-+/* Applicable to the above three registers */
-+enum {
-+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
-+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/*
-+ * PCIe PDI PHY register definition, suppose all the following
-+ * stuff is confidential.
-+ * XXX, detailed bit definition
-+ */
-+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+
-+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA 1
-+#define PCIE_LEGACY_INTB 2
-+#define PCIE_LEGACY_INTC 3
-+#define PCIE_LEGACY_INTD 4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#endif /* IFXMIPS_PCIE_REG_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -0,0 +1,269 @@
-+/****************************************************************************
-+ Copyright (c) 2010
-+ Lantiq Deutschland GmbH
-+ Am Campeon 3; 85579 Neubiberg, Germany
-+
-+ For licensing information, see the file 'LICENSE' in the root folder of
-+ this software module.
-+
-+ *****************************************************************************/
-+/*!
-+ \file ifxmips_pcie_vr9.h
-+ \ingroup IFX_PCIE
-+ \brief PCIe RC driver vr9 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_VR9_H
-+#define IFXMIPS_PCIE_VR9_H
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include <linux/gpio.h>
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET 494
-+
-+#define IFX_REG_R32 ltq_r32
-+#define IFX_REG_W32 ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL (1)
-+#define IFX_PMU1_MODULE_PDI (4)
-+#define IFX_PMU1_MODULE_MSI (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+#define IFX_GPIO (KSEG1 | 0x1E100B00)
-+#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c))
-+#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080))
-+#define OD ((volatile u32*)(IFX_GPIO + 0x0084))
-+#define DIR ((volatile u32*)(IFX_GPIO + 0x0078))
-+#define OUT ((volatile u32*)(IFX_GPIO + 0x0070))
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+
-+ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
-+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+
-+/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+ /* Enable AHB bus master/slave */
-+ struct clk *clk;
-+ clk = clk_get_sys("1d900000.pcie", "ahb");
-+ clk_enable(clk);
-+
-+ //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
-+ //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg |= IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("1d900000.pcie", "phy");
-+ clk_enable(clk);
-+
-+ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("1d900000.pcie", "phy");
-+ clk_disable(clk);
-+
-+// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* SRAM2PDI endianness control. */
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+ /* Config AHB->PCIe and PDI endianness */
-+ reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+ /* Enable PDI to access PCIe PHY register */
-+ struct clk *clk;
-+ clk = clk_get_sys("1d900000.pcie", "pdi");
-+ clk_enable(clk);
-+ //PDI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
-+ reg |= 0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ /* Reset PCIe PHY & Core, bit 22 */
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg |= 0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+ mdelay(100);
-+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+// gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("1d900000.pcie", "ctl");
-+ clk_enable(clk);
-+ clk = clk_get_sys("1d900000.pcie", "bus");
-+ clk_enable(clk);
-+
-+ /* PCIe Core controller enabled */
-+// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+
-+ /* Enable PCIe L0 Clock */
-+// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+ struct clk *clk;
-+ pcie_msi_pic_init(pcie_port);
-+ clk = clk_get_sys("ltq_pcie", "msi");
-+ clk_enable(clk);
-+// MSI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+ u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tbus_number -= pcibios_1st_host_bus_nr();
-+ }
-+#endif /* CONFIG_PCI_LANTIQ */
-+ return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+ struct pci_dev *pdev;
-+ u32 tvalue = value;
-+
-+ /* Sanity check */
-+ pdev = pci_get_slot(bus, devfn);
-+ if (pdev == NULL) {
-+ return tvalue;
-+ }
-+
-+ /* Only care about PCI bridge */
-+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+ return tvalue;
-+ }
-+
-+ if (read) { /* Read hack */
-+ #ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+ }
-+ #endif /* CONFIG_PCI_LANTIQ */
-+ }
-+ else { /* Write hack */
-+ #ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+ }
-+ #endif
-+ }
-+ return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -256,6 +256,31 @@ static int __init pcibios_init(void)
-
- subsys_initcall(pcibios_init);
-
-+int pcibios_host_nr(void)
-+{
-+ int count;
-+ struct pci_controller *hose;
-+ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
-+ ;
-+ }
-+ return count;
-+}
-+EXPORT_SYMBOL(pcibios_host_nr);
-+
-+int pcibios_1st_host_bus_nr(void)
-+{
-+ int bus_nr = 0;
-+ struct pci_controller *hose = hose_head;
-+
-+ if (hose != NULL) {
-+ if (hose->bus != NULL) {
-+ bus_nr = hose->bus->number + 1;
-+ }
-+ }
-+ return bus_nr;
-+}
-+EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
-+
- static int pcibios_enable_resources(struct pci_dev *dev, int mask)
- {
- u16 cmd, old_cmd;
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq.h
-@@ -0,0 +1,1305 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_reg.h
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE 0x1D000000UL
-+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE 0x1C000000UL
-+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE 0x1D800000UL
-+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE 0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE 0x1F106800UL
-+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE 0x400
-+
-+#define PCIE1_CFG_PHY_BASE 0x19000000UL
-+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE 0x18000000UL
-+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE 0x19800000UL
-+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE 0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE 0x1F700400UL
-+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE 0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S 9
-+
-+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+ PCIE_RC_DR_D0 = 0,
-+ PCIE_RC_DR_D1, /* Not supported */
-+ PCIE_RC_DR_D2, /* Not supported */
-+ PCIE_RC_DR_D3,
-+ PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S 4
-+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S 9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S 0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S 0
-+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S 5
-+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S 12
-+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S 18
-+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S 22
-+
-+/* Format Definition */
-+enum {
-+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
-+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
-+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
-+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+ PCIE_VM_MSG_TC0 = 0,
-+ PCIE_VM_MSG_TC1,
-+ PCIE_VM_MSG_TC2,
-+ PCIE_VM_MSG_TC3,
-+ PCIE_VM_MSG_TC4,
-+ PCIE_VM_MSG_TC5,
-+ PCIE_VM_MSG_TC6,
-+ PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
-+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
-+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
-+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN 0
-+#define PCIE_VM_MSG_LEN_MAX 1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
-+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S 16
-+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S 24
-+
-+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S 3
-+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S 5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S 0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA 0x00002000 /* INTA */
-+#define PCIE_IRN_INTB 0x00004000 /* INTB */
-+#define PCIE_IRN_INTC 0x00008000 /* INTC */
-+#define PCIE_IRN_INTD 0x00010000 /* INTD */
-+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
-+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
-+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S 16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S 4
-+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR 0x00000001
-+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S 4
-+#define PCIE_PMBL_E64MA 0x00010000
-+#define PCIE_PMBL_END_ADDR 0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S 20
-+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
-+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
-+
-+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S 0
-+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S 8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+ PCIE_INTRBCTRL_INT_NON = 0,
-+ PCIE_INTRBCTRL_INTA,
-+ PCIE_INTRBCTRL_INTB,
-+ PCIE_INTRBCTRL_INTC,
-+ PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S 0
-+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S 0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
-+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
-+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
-+#define PCIE_MD_DATA_S 0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S 0
-+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S 8
-+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S 16
-+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S 20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S 25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
-+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S 3
-+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S 6
-+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S 9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+ PCIE_MAX_PAYLOAD_128 = 0,
-+ PCIE_MAX_PAYLOAD_256,
-+ PCIE_MAX_PAYLOAD_512,
-+ PCIE_MAX_PAYLOAD_1024,
-+ PCIE_MAX_PAYLOAD_2048,
-+ PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
-+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+ PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S 0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
-+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
-+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
-+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
-+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S 24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+ PCIE_ASPM_RES0 = 0,
-+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
-+ PCIE_ASPM_RES1,
-+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
-+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
-+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
-+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
-+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
-+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
-+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
-+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
-+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
-+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
-+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
-+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
-+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
-+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
-+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
-+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S 16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S 0
-+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
-+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S 0
-+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S 16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
-+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
-+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
-+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
-+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S 0
-+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S 27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S 0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
-+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S 8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN 0
-+#define PCIE_EXT_VC_CNT_MAX 7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
-+
-+/* Port VC Control and Status Register */
-+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
-+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S 24
-+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S 0
-+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
-+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S 16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
-+#define PCIE_AFR_AF_S 0
-+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S 8
-+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S 16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
-+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
-+#define PCIE_AFR_FTS_NUM_DEFAULT 32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
-+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S 16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S 0
-+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S 0
-+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S 8
-+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S 14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
-+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S 28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S 0
-+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
-+
-+/* Applicable to the above three registers */
-+enum {
-+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
-+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/*
-+ * PCIe PDI PHY register definition, suppose all the following
-+ * stuff is confidential.
-+ * XXX, detailed bit definition
-+ */
-+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+
-+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA 1
-+#define PCIE_LEGACY_INTB 2
-+#define PCIE_LEGACY_INTC 3
-+#define PCIE_LEGACY_INTD 4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#define PCIE_IRQ_LOCK(lock) do { \
-+ unsigned long flags; \
-+ spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock) \
-+ spin_unlock_irqrestore(&(lock), flags); \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI 0x00000001
-+#define PCIE_MSG_ISR 0x00000002
-+#define PCIE_MSG_FIXUP 0x00000004
-+#define PCIE_MSG_READ_CFG 0x00000008
-+#define PCIE_MSG_WRITE_CFG 0x00000010
-+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG 0x00000020
-+#define PCIE_MSG_INIT 0x00000040
-+#define PCIE_MSG_ERR 0x00000080
-+#define PCIE_MSG_PHY 0x00000100
-+#define PCIE_MSG_ANY 0x000001ff
-+
-+#define IFX_PCIE_PORT0 0
-+#define IFX_PCIE_PORT1 1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR 2
-+#else
-+#define IFX_PCIE_CORE_NR 1
-+#endif
-+
-+//#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
-+ if (g_pcie_debug_flag & (_m)) { \
-+ ifx_pcie_debug((_fmt), ##args); \
-+ } \
-+} while (0)
-+
-+#define INLINE
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) \
-+ do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+ struct pci_controller pcic;
-+
-+ /* RC specific, per host bus information */
-+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+ const unsigned int irq;
-+ const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+ const u32 irq_bit;
-+ const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+ ifx_pcie_ir_irq_t ir_irq;
-+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/clk.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET 38
-+#define IFX_REG_R32 ltq_r32
-+#define IFX_REG_W32 ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL (1)
-+#define IFX_PMU1_MODULE_PDI (4)
-+#define IFX_PMU1_MODULE_MSI (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "ahb");
-+ clk_enable(clk);
-+ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg |= IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "phy");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "phy");
-+ clk_disable(clk);
-+ //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* SRAM2PDI endianness control. */
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+ /* Config AHB->PCIe and PDI endianness */
-+ reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "pdi");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
-+ reg |= 0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ /* Reset PCIe PHY & Core, bit 22 */
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg |= 0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+ // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+ mdelay(100);
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "ctl");
-+ clk_enable(clk);
-+ clk = clk_get_sys("ltq_pcie", "bus");
-+ clk_enable(clk);
-+
-+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
-+ //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+ struct clk *clk;
-+ pcie_msi_pic_init(pcie_port);
-+ clk = clk_get_sys("ltq_pcie", "msi");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+ u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tbus_number -= pcibios_1st_host_bus_nr();
-+ }
-+#endif /* CONFIG_PCI_LANTIQ */
-+ return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+ struct pci_dev *pdev;
-+ u32 tvalue = value;
-+
-+ /* Sanity check */
-+ pdev = pci_get_slot(bus, devfn);
-+ if (pdev == NULL) {
-+ return tvalue;
-+ }
-+
-+ /* Only care about PCI bridge */
-+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+ return tvalue;
-+ }
-+
-+ if (read) { /* Read hack */
-+ #ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+ }
-+ #endif /* CONFIG_PCI_LANTIQ */
-+ }
-+ else { /* Write hack */
-+ #ifdef CONFIG_PCI_LANTIQ
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+ }
-+ #endif
-+ }
-+ return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/drivers/pci/pcie/aer/Kconfig
-+++ b/drivers/pci/pcie/aer/Kconfig
-@@ -19,6 +19,7 @@ config PCIEAER
- config PCIE_ECRC
- bool "PCI Express ECRC settings control"
- depends on PCIEAER
-+ default n
- help
- Used to override firmware/bios settings for PCI Express ECRC
- (transaction layer end-to-end CRC checking).
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -1179,6 +1179,8 @@ void pci_walk_bus(struct pci_bus *top, i
- void *userdata);
- int pci_cfg_space_size(struct pci_dev *dev);
- unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-+int pcibios_host_nr(void);
-+int pcibios_1st_host_bus_nr(void);
- void pci_setup_bridge(struct pci_bus *bus);
- resource_size_t pcibios_window_alignment(struct pci_bus *bus,
- unsigned long type);
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1053,6 +1053,12 @@
- #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
- #define PCI_DEVICE_ID_SGI_IOC4 0x100a
-
-+#define PCI_VENDOR_ID_INFINEON 0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
-+#define PCI_VENDOR_ID_LANTIQ 0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011
-+
- #define PCI_VENDOR_ID_WINBOND 0x10ad
- #define PCI_DEVICE_ID_WINBOND_82C105 0x0105
- #define PCI_DEVICE_ID_WINBOND_83C553 0x0565
diff --git a/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch
deleted file mode 100644
index a68607c75b..0000000000
--- a/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/Makefile | 2 --
- arch/mips/lantiq/prom.c | 4 +++-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -63,6 +63,8 @@ static void __init prom_init_cmdline(voi
- }
- }
-
-+extern struct boot_param_header __image_dtb;
-+
- void __init plat_mem_setup(void)
- {
- ioport_resource.start = IOPORT_RESOURCE_START;
-@@ -76,7 +78,7 @@ void __init plat_mem_setup(void)
- * Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing
- */
-- __dt_setup_arch(__dtb_start);
-+ __dt_setup_arch(&__image_dtb);
-
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- }
diff --git a/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch
deleted file mode 100644
index 53809d0a8f..0000000000
--- a/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch
+++ /dev/null
@@ -1,500 +0,0 @@
-From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++
- arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++
- arch/mips/lantiq/irq.c | 2 +
- arch/mips/mm/cache.c | 2 +
- include/uapi/linux/atm.h | 6 +
- net/atm/common.c | 6 +
- net/atm/proc.c | 2 +-
- 7 files changed, 416 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
-@@ -0,0 +1,196 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifx_atm.h
-+** PROJECT : UEIP
-+** MODULES : ATM
-+**
-+** DATE : 17 Jun 2009
-+** AUTHOR : Xu Liang
-+** DESCRIPTION : Global ATM driver header file
-+** COPYRIGHT : Copyright (c) 2006
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 07 JUL 2009 Xu Liang Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_ATM_H
-+#define IFX_ATM_H
-+
-+
-+
-+/*!
-+ \defgroup IFX_ATM UEIP Project - ATM driver module
-+ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+ \defgroup IFX_ATM_IOCTL IOCTL Commands
-+ \ingroup IFX_ATM
-+ \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+ \defgroup IFX_ATM_STRUCT Structures
-+ \ingroup IFX_ATM
-+ \brief Structures used by user application.
-+ */
-+
-+/*!
-+ \file ifx_atm.h
-+ \ingroup IFX_ATM
-+ \brief ATM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ * Definition
-+ * ####################################
-+ */
-+
-+/*!
-+ \addtogroup IFX_ATM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ * ATM MIB
-+ */
-+
-+/*!
-+ \struct atm_cell_ifEntry_t
-+ \brief Structure used for Cell Level MIB Counters.
-+
-+ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
-+ */
-+typedef struct {
-+ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */
-+ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */
-+ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */
-+ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */
-+ __u32 ifInErrors; /*!< counter of error ingress cells */
-+ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */
-+ __u32 ifOutErrors; /*!< counter of error egress cells */
-+} atm_cell_ifEntry_t;
-+
-+/*!
-+ \struct atm_aal5_ifEntry_t
-+ \brief Structure used for AAL5 Frame Level MIB Counters.
-+
-+ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
-+ */
-+typedef struct {
-+ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
-+ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
-+ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */
-+ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */
-+ __u32 ifInUcastPkts; /*!< counter of ingress packets */
-+ __u32 ifOutUcastPkts; /*!< counter of egress packets */
-+ __u32 ifInErrors; /*!< counter of error ingress packets */
-+ __u32 ifInDiscards; /*!< counter of dropped ingress packets */
-+ __u32 ifOutErros; /*!< counter of error egress packets */
-+ __u32 ifOutDiscards; /*!< counter of dropped egress packets */
-+} atm_aal5_ifEntry_t;
-+
-+/*!
-+ \struct atm_aal5_vcc_t
-+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+ This structure is a part of structure "atm_aal5_vcc_x_t".
-+ */
-+typedef struct {
-+ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */
-+ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet
-+ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */
-+} atm_aal5_vcc_t;
-+
-+/*!
-+ \struct atm_aal5_vcc_x_t
-+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
-+ */
-+typedef struct {
-+ int vpi; /*!< VPI of the VCC to get MIB counters */
-+ int vci; /*!< VCI of the VCC to get MIB counters */
-+ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */
-+} atm_aal5_vcc_x_t;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ * IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+ \addtogroup IFX_ATM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ * ioctl Command
-+ */
-+/*!
-+ \brief ATM IOCTL Magic Number
-+ */
-+#define PPE_ATM_IOC_MAGIC 'o'
-+/*!
-+ \brief ATM IOCTL Command - Get Cell Level MIB Counters
-+
-+ This command is obsolete. User can get cell level MIB from DSL API.
-+ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t)
-+/*!
-+ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
-+
-+ Get AAL5 packet counters.
-+ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t)
-+/*!
-+ \brief ATM IOCTL Command - Get Per PVC MIB Counters
-+
-+ Get AAL5 packet counters for each PVC.
-+ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
-+/*!
-+ \brief Total Number of ATM IOCTL Commands
-+ */
-+#define PPE_ATM_IOC_MAXNR 3
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ * API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+ unsigned int port_num;
-+ unsigned int tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif // IFX_ATM_H
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-@@ -0,0 +1,203 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifx_ptm.h
-+** PROJECT : UEIP
-+** MODULES : PTM
-+**
-+** DATE : 17 Jun 2009
-+** AUTHOR : Xu Liang
-+** DESCRIPTION : Global PTM driver header file
-+** COPYRIGHT : Copyright (c) 2006
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 07 JUL 2009 Xu Liang Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_PTM_H
-+#define IFX_PTM_H
-+
-+
-+
-+/*!
-+ \defgroup IFX_PTM UEIP Project - PTM driver module
-+ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+ \defgroup IFX_PTM_IOCTL IOCTL Commands
-+ \ingroup IFX_PTM
-+ \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+ \defgroup IFX_PTM_STRUCT Structures
-+ \ingroup IFX_PTM
-+ \brief Structures used by user application.
-+ */
-+
-+/*!
-+ \file ifx_ptm.h
-+ \ingroup IFX_PTM
-+ \brief PTM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ * Definition
-+ * ####################################
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ * IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+ \addtogroup IFX_PTM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ * ioctl Command
-+ */
-+/*!
-+ \brief PTM IOCTL Command - Get codeword MIB counters.
-+
-+ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
-+ */
-+#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1
-+/*!
-+ \brief PTM IOCTL Command - Get packet MIB counters.
-+
-+ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
-+ */
-+#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2
-+/*!
-+ \brief PTM IOCTL Command - Get firmware configuration (CRC).
-+
-+ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3
-+/*!
-+ \brief PTM IOCTL Command - Set firmware configuration (CRC).
-+
-+ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4
-+/*!
-+ \brief PTM IOCTL Command - Program priority value to TX queue mapping.
-+
-+ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
-+ */
-+#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14
-+
-+/*@}*/
-+
-+
-+/*!
-+ \addtogroup IFX_PTM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ * ioctl Data Type
-+ */
-+
-+/*!
-+ \typedef PTM_CW_IF_ENTRY_T
-+ \brief Wrapping of structure "ptm_cw_ifEntry_t".
-+ */
-+/*!
-+ \struct ptm_cw_ifEntry_t
-+ \brief Structure used for CodeWord level MIB counters.
-+ */
-+typedef struct ptm_cw_ifEntry_t {
-+ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */
-+ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */
-+ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */
-+ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */
-+ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */
-+} PTM_CW_IF_ENTRY_T;
-+
-+/*!
-+ \typedef PTM_FRAME_MIB_T
-+ \brief Wrapping of structure "ptm_frame_mib_t".
-+ */
-+/*!
-+ \struct ptm_frame_mib_t
-+ \brief Structure used for packet level MIB counters.
-+ */
-+typedef struct ptm_frame_mib_t {
-+ uint32_t RxCorrect; /*!< output, number of ingress packet */
-+ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */
-+ uint32_t RxDropped; /*!< output, number of dropped ingress packet */
-+ uint32_t TxSend; /*!< output, number of egress packet */
-+} PTM_FRAME_MIB_T;
-+
-+/*!
-+ \typedef IFX_PTM_CFG_T
-+ \brief Wrapping of structure "ptm_cfg_t".
-+ */
-+/*!
-+ \struct ptm_cfg_t
-+ \brief Structure used for ETH/TC CRC configuration.
-+ */
-+typedef struct ptm_cfg_t {
-+ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */
-+ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */
-+ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */
-+ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */
-+ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */
-+ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */
-+ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */
-+} IFX_PTM_CFG_T;
-+
-+/*!
-+ \typedef IFX_PTM_PRIO_Q_MAP_T
-+ \brief Wrapping of structure "ppe_prio_q_map".
-+ */
-+/*!
-+ \struct ppe_prio_q_map
-+ \brief Structure used for Priority Value to TX Queue mapping.
-+ */
-+typedef struct ppe_prio_q_map {
-+ int pkt_prio;
-+ int qid;
-+ int vpi; // ignored in eth interface
-+ int vci; // ignored in eth interface
-+} IFX_PTM_PRIO_Q_MAP_T;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ * API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+ unsigned int port_num;
-+ unsigned int tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif // IFX_PTM_H
-+
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -14,6 +14,7 @@
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
-+#include <linux/module.h>
-
- #include <asm/bootinfo.h>
- #include <asm/irq_cpu.h>
-@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
- ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
- ltq_icu_w32(im, BIT(offset), isr);
- }
-+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
-
- static void ltq_ack_irq(struct irq_data *d)
- {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
-
---- a/include/uapi/linux/atm.h
-+++ b/include/uapi/linux/atm.h
-@@ -130,8 +130,14 @@
- #define ATM_ABR 4
- #define ATM_ANYCLASS 5 /* compatible with everything */
-
-+#define ATM_VBR_NRT ATM_VBR
-+#define ATM_VBR_RT 6
-+#define ATM_UBR_PLUS 7
-+#define ATM_GFR 8
-+
- #define ATM_MAX_PCR -1 /* maximum available PCR */
-
-+
- struct atm_trafprm {
- unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
- int max_pcr; /* maximum PCR in cells per second */
---- a/net/atm/common.c
-+++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
- write_unlock_irq(&vcc_sklist_lock);
- }
-
-+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
-+EXPORT_SYMBOL(ifx_atm_alloc_tx);
-+
- static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
- {
- struct sk_buff *skb;
- struct sock *sk = sk_atm(vcc);
-
-+ if (ifx_atm_alloc_tx != NULL)
-+ return ifx_atm_alloc_tx(vcc, size);
-+
- if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
- pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
- sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
---- a/net/atm/proc.c
-+++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
- static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
- {
- static const char *const class_name[] = {
-- "off", "UBR", "CBR", "VBR", "ABR"};
-+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
- static const char *const aal_name[] = {
- "---", "1", "2", "3/4", /* 0- 3 */
- "???", "5", "???", "???", /* 4- 7 */
diff --git a/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch b/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch
deleted file mode 100644
index 70813738cc..0000000000
--- a/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:34:19 +0200
-Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile | 2 +-
- arch/mips/lantiq/xway/tffs.c | 87 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 88 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/lantiq/xway/tffs.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,5 +1,5 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
-
--obj-y += vmmc.o
-+obj-y += vmmc.o tffs.o
-
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/tffs.c
-@@ -0,0 +1,87 @@
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+
-+struct tffs_entry {
-+ uint16_t id;
-+ uint16_t len;
-+};
-+
-+static struct tffs_id {
-+ uint32_t id;
-+ char *name;
-+ unsigned char *val;
-+ uint32_t offset;
-+ uint32_t len;
-+} ids[] = {
-+ { 0x01A9, "annex" },
-+ { 0x0188, "maca" },
-+ { 0x0189, "macb" },
-+ { 0x018a, "macwlan" },
-+ { 0x0195, "macwlan2" },
-+ { 0x018b, "macdsl" },
-+ { 0x01C2, "webgui_pass" },
-+ { 0x01AB, "wlan_key" },
-+};
-+
-+static struct mtd_info *tffs1, *tffs2;
-+
-+static struct tffs_id* tffs_find_id(int id)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(ids); i++)
-+ if (id == ids[i].id)
-+ return &ids[i];
-+
-+ return NULL;
-+}
-+
-+static void tffs_index(void)
-+{
-+ struct tffs_entry *E = NULL;
-+ struct tffs_entry entry;
-+ int ret, retlen;
-+
-+ while ((unsigned int) E + sizeof(struct tffs_entry) < tffs2->size) {
-+ struct tffs_id *id;
-+ int len;
-+
-+ ret = mtd_read(tffs2, (unsigned int) E, sizeof(struct tffs_entry), &retlen, (unsigned char *)&entry);
-+ if (ret)
-+ return;
-+
-+ if (entry.id == 0xffff)
-+ return;
-+
-+ id = tffs_find_id(entry.id);
-+ if (id) {
-+ id->offset = (uint32_t) E;
-+ id->len = entry.len;
-+ id->val = kzalloc(entry.len + 1, GFP_KERNEL);
-+ mtd_read(tffs2, ((unsigned int) E) + sizeof(struct tffs_entry), entry.len, &retlen, id->val);
-+
-+ }
-+ //printk(KERN_INFO "found entry at 0x%08X-> [<0x%x> %u bytes]\n", (uint32_t) E, entry.id, entry.len);
-+ if (id && id->name)
-+ printk(KERN_INFO "found entry name -> %s=%s\n", id->name, id->val);
-+
-+ len = (entry.len + 3) & ~0x03;
-+ E = (struct tffs_entry *)(((unsigned int)E) + sizeof(struct tffs_entry) + len);
-+ }
-+}
-+
-+static int __init tffs_init(void)
-+{
-+ tffs1 = get_mtd_device_nm("tffs (1)");
-+ tffs2 = get_mtd_device_nm("tffs (2)");
-+ if (IS_ERR(tffs1) || IS_ERR(tffs2))
-+ return -1;
-+
-+ tffs_index();
-+
-+ return 0;
-+}
-+late_initcall(tffs_init);
-+
diff --git a/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch
deleted file mode 100644
index 55255037fa..0000000000
--- a/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ /dev/null
@@ -1,1028 +0,0 @@
-From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:30:56 +0200
-Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++
- arch/mips/lantiq/xway/Makefile | 2 +-
- arch/mips/lantiq/xway/timer.c | 845 ++++++++++++++++++++++
- 3 files changed, 1001 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
- create mode 100644 arch/mips/lantiq/xway/timer.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-@@ -0,0 +1,155 @@
-+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+
-+
-+/******************************************************************************
-+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
-+
-+ No Warranty
-+ Because the program is licensed free of charge, there is no warranty for
-+ the program, to the extent permitted by applicable law. Except when
-+ otherwise stated in writing the copyright holders and/or other parties
-+ provide the program "as is" without warranty of any kind, either
-+ expressed or implied, including, but not limited to, the implied
-+ warranties of merchantability and fitness for a particular purpose. The
-+ entire risk as to the quality and performance of the program is with
-+ you. should the program prove defective, you assume the cost of all
-+ necessary servicing, repair or correction.
-+
-+ In no event unless required by applicable law or agreed to in writing
-+ will any copyright holder, or any other party who may modify and/or
-+ redistribute the program as permitted above, be liable to you for
-+ damages, including any general, special, incidental or consequential
-+ damages arising out of the use or inability to use the program
-+ (including but not limited to loss of data or data being rendered
-+ inaccurate or losses sustained by you or third parties or a failure of
-+ the program to operate with any other programs), even if such holder or
-+ other party has been advised of the possibility of such damages.
-+******************************************************************************/
-+
-+
-+/*
-+ * ####################################
-+ * Definition
-+ * ####################################
-+ */
-+
-+/*
-+ * Available Timer/Counter Index
-+ */
-+#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
-+#define TIMER_ANY 0x00
-+#define TIMER1A TIMER(1, 0)
-+#define TIMER1B TIMER(1, 1)
-+#define TIMER2A TIMER(2, 0)
-+#define TIMER2B TIMER(2, 1)
-+#define TIMER3A TIMER(3, 0)
-+#define TIMER3B TIMER(3, 1)
-+
-+/*
-+ * Flag of Timer/Counter
-+ * These flags specify the way in which timer is configured.
-+ */
-+/* Bit size of timer/counter. */
-+#define TIMER_FLAG_16BIT 0x0000
-+#define TIMER_FLAG_32BIT 0x0001
-+/* Switch between timer and counter. */
-+#define TIMER_FLAG_TIMER 0x0000
-+#define TIMER_FLAG_COUNTER 0x0002
-+/* Stop or continue when overflowing/underflowing. */
-+#define TIMER_FLAG_ONCE 0x0000
-+#define TIMER_FLAG_CYCLIC 0x0004
-+/* Count up or counter down. */
-+#define TIMER_FLAG_UP 0x0000
-+#define TIMER_FLAG_DOWN 0x0008
-+/* Count on specific level or edge. */
-+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
-+#define TIMER_FLAG_RISE_EDGE 0x0010
-+#define TIMER_FLAG_FALL_EDGE 0x0020
-+#define TIMER_FLAG_ANY_EDGE 0x0030
-+/* Signal is syncronous to module clock or not. */
-+#define TIMER_FLAG_UNSYNC 0x0000
-+#define TIMER_FLAG_SYNC 0x0080
-+/* Different interrupt handle type. */
-+#define TIMER_FLAG_NO_HANDLE 0x0000
-+#if defined(__KERNEL__)
-+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
-+#endif // defined(__KERNEL__)
-+#define TIMER_FLAG_SIGNAL 0x0300
-+/* Internal clock source or external clock source */
-+#define TIMER_FLAG_INT_SRC 0x0000
-+#define TIMER_FLAG_EXT_SRC 0x1000
-+
-+
-+/*
-+ * ioctl Command
-+ */
-+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
-+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
-+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
-+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
-+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
-+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
-+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
-+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
-+
-+/*
-+ * Data Type Used to Call ioctl
-+ */
-+struct gptu_ioctl_param {
-+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
-+ * GPTU_SET_COUNTER, this field is ID of expected *
-+ * timer/counter. If it's zero, a timer/counter would *
-+ * be dynamically allocated and ID would be stored in *
-+ * this field. *
-+ * In command GPTU_GET_COUNT_VALUE, this field is *
-+ * ignored. *
-+ * In other command, this field is ID of timer/counter *
-+ * allocated. */
-+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
-+ * GPTU_SET_COUNTER, this field contains flags to *
-+ * specify how to configure timer/counter. *
-+ * In command GPTU_START_TIMER, zero indicate start *
-+ * and non-zero indicate resume timer/counter. *
-+ * In other command, this field is ignored. */
-+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
-+ * init/reload value. *
-+ * In command GPTU_SET_TIMER, this field contains *
-+ * frequency (0.001Hz) of timer. *
-+ * In command GPTU_GET_COUNT_VALUE, current count *
-+ * value would be stored in this field. *
-+ * In command GPTU_CALCULATE_DIVIDER, this field *
-+ * contains frequency wanted, and after calculation, *
-+ * divider would be stored in this field to overwrite *
-+ * the frequency. *
-+ * In other command, this field is ignored. */
-+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
-+ * if signal is required, this field contains process *
-+ * ID to which signal would be sent. *
-+ * In other command, this field is ignored. */
-+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
-+ * if signal is required, this field contains signal *
-+ * number which would be sent. *
-+ * In other command, this field is ignored. */
-+};
-+
-+/*
-+ * ####################################
-+ * Data Type
-+ * ####################################
-+ */
-+typedef void (*timer_callback)(unsigned long arg);
-+
-+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-+extern int lq_free_timer(unsigned int);
-+extern int lq_start_timer(unsigned int, int);
-+extern int lq_stop_timer(unsigned int);
-+extern int lq_reset_counter_flags(u32 timer, u32 flags);
-+extern int lq_get_count_value(unsigned int, unsigned long *);
-+extern u32 lq_cal_divider(unsigned long);
-+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-+extern int lq_set_counter(unsigned int timer, unsigned int flag,
-+ u32 reload, unsigned long arg1, unsigned long arg2);
-+
-+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
-
- obj-y += vmmc.o tffs.o
-
---- /dev/null
-+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,845 @@
-+#ifndef CONFIG_SOC_AMAZON_SE
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+#include "../clk.h"
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_timer.h>
-+
-+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6
-+
-+#ifdef TIMER1A
-+#define FIRST_TIMER TIMER1A
-+#else
-+#define FIRST_TIMER 2
-+#endif
-+
-+/*
-+ * GPTC divider is set or not.
-+ */
-+#define GPTU_CLC_RMC_IS_SET 0
-+
-+/*
-+ * Timer Interrupt (IRQ)
-+ */
-+/* Must be adjusted when ICU driver is available */
-+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
-+
-+/*
-+ * Bits Operation
-+ */
-+#define GET_BITS(x, msb, lsb) \
-+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+#define SET_BITS(x, msb, lsb, value) \
-+ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
-+ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-+
-+/*
-+ * GPTU Register Mapping
-+ */
-+#define LQ_GPTU (KSEG1 + 0x1E100A00)
-+#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000))
-+#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008))
-+#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4))
-+#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8))
-+#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC))
-+
-+/*
-+ * Clock Control Register
-+ */
-+#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16)
-+#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8)
-+#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5))
-+#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3))
-+#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2))
-+#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1))
-+#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0))
-+
-+#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value))
-+#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value))
-+#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0)
-+#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0)
-+#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0)
-+#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0)
-+
-+/*
-+ * ID Register
-+ */
-+#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8)
-+#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5)
-+#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0)
-+
-+/*
-+ * Control Register of Timer/Counter nX
-+ * n is the index of block (1 based index)
-+ * X is either A or B
-+ */
-+#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10))
-+#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9))
-+#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8))
-+#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-+#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5))
-+#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
-+#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3))
-+#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2))
-+#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1))
-+#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0))
-+
-+#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10))
-+#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0)
-+#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0)
-+#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value))
-+#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0)
-+#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0)
-+#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0)
-+#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0)
-+
-+#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0)
-+#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0)
-+
-+#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+
-+#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001)
-+#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002)
-+#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004)
-+#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008)
-+#define TIMER_FLAG_NONE_EDGE 0x0000
-+#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030)
-+#define TIMER_FLAG_REAL 0x0000
-+#define TIMER_FLAG_INVERT 0x0040
-+#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040)
-+#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070)
-+#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080)
-+#define TIMER_FLAG_CALLBACK_IN_HB 0x0200
-+#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300)
-+#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000)
-+
-+struct timer_dev_timer {
-+ unsigned int f_irq_on;
-+ unsigned int irq;
-+ unsigned int flag;
-+ unsigned long arg1;
-+ unsigned long arg2;
-+};
-+
-+struct timer_dev {
-+ struct mutex gptu_mutex;
-+ unsigned int number_of_timers;
-+ unsigned int occupation;
-+ unsigned int f_gptu_on;
-+ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-+};
-+
-+
-+unsigned int ltq_get_fpi_bus_clock(int fpi) {
-+ struct clk *clk = clk_get_fpi();
-+ return clk_get_rate(clk);
-+}
-+
-+
-+static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-+static int gptu_open(struct inode *, struct file *);
-+static int gptu_release(struct inode *, struct file *);
-+
-+static struct file_operations gptu_fops = {
-+ .owner = THIS_MODULE,
-+ .unlocked_ioctl = gptu_ioctl,
-+ .open = gptu_open,
-+ .release = gptu_release
-+};
-+
-+static struct miscdevice gptu_miscdev = {
-+ .minor = MISC_DYNAMIC_MINOR,
-+ .name = "gptu",
-+ .fops = &gptu_fops,
-+};
-+
-+static struct timer_dev timer_dev;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *p)
-+{
-+ unsigned int timer;
-+ unsigned int flag;
-+ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-+
-+ timer = irq - TIMER_INTERRUPT;
-+ if (timer < timer_dev.number_of_timers
-+ && dev_timer == &timer_dev.timer[timer]) {
-+ /* Clear interrupt. */
-+ ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-+
-+ /* Call user hanler or signal. */
-+ flag = dev_timer->flag;
-+ if (!(timer & 0x01)
-+ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+ /* 16-bit timer or timer A of 32-bit timer */
-+ switch (TIMER_FLAG_MASK_HANDLE(flag)) {
-+ case TIMER_FLAG_CALLBACK_IN_IRQ:
-+ case TIMER_FLAG_CALLBACK_IN_HB:
-+ if (dev_timer->arg1)
-+ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
-+ break;
-+ case TIMER_FLAG_SIGNAL:
-+ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
-+ break;
-+ }
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void lq_enable_gptu(void)
-+{
-+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+ clk_enable(clk);
-+
-+ //ltq_pmu_enable(PMU_GPT);
-+
-+ /* Set divider as 1, disable write protection for SPEN, enable module. */
-+ *LQ_GPTU_CLC =
-+ GPTU_CLC_SMC_SET(0x00) |
-+ GPTU_CLC_RMC_SET(0x01) |
-+ GPTU_CLC_FSOE_SET(0) |
-+ GPTU_CLC_SBWE_SET(1) |
-+ GPTU_CLC_EDIS_SET(0) |
-+ GPTU_CLC_SPEN_SET(0) |
-+ GPTU_CLC_DISR_SET(0);
-+}
-+
-+static inline void lq_disable_gptu(void)
-+{
-+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+ ltq_w32(0x00, LQ_GPTU_IRNEN);
-+ ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+ /* Set divider as 0, enable write protection for SPEN, disable module. */
-+ *LQ_GPTU_CLC =
-+ GPTU_CLC_SMC_SET(0x00) |
-+ GPTU_CLC_RMC_SET(0x00) |
-+ GPTU_CLC_FSOE_SET(0) |
-+ GPTU_CLC_SBWE_SET(0) |
-+ GPTU_CLC_EDIS_SET(0) |
-+ GPTU_CLC_SPEN_SET(0) |
-+ GPTU_CLC_DISR_SET(1);
-+
-+ clk_enable(clk);
-+}
-+
-+int lq_request_timer(unsigned int timer, unsigned int flag,
-+ unsigned long value, unsigned long arg1, unsigned long arg2)
-+{
-+ int ret = 0;
-+ unsigned int con_reg, irnen_reg;
-+ int n, X;
-+
-+ if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
-+ timer, flag, value);
-+
-+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
-+ value &= 0xFFFF;
-+ else
-+ timer &= ~0x01;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ /*
-+ * Allocate timer.
-+ */
-+ if (timer < FIRST_TIMER) {
-+ unsigned int mask;
-+ unsigned int shift;
-+ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
-+ unsigned int offset = TIMER2A;
-+
-+ /*
-+ * Pick up a free timer.
-+ */
-+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+ mask = 1 << offset;
-+ shift = 1;
-+ } else {
-+ mask = 3 << offset;
-+ shift = 2;
-+ }
-+ for (timer = offset;
-+ timer < offset + timer_dev.number_of_timers;
-+ timer += shift, mask <<= shift)
-+ if (!(timer_dev.occupation & mask)) {
-+ timer_dev.occupation |= mask;
-+ break;
-+ }
-+ if (timer >= offset + timer_dev.number_of_timers) {
-+ printk("failed![%d]\n", __LINE__);
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ } else
-+ ret = timer;
-+ } else {
-+ register unsigned int mask;
-+
-+ /*
-+ * Check if the requested timer is free.
-+ */
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if ((timer_dev.occupation & mask)) {
-+ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
-+ __LINE__, mask, timer_dev.occupation);
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EBUSY;
-+ } else {
-+ timer_dev.occupation |= mask;
-+ ret = 0;
-+ }
-+ }
-+
-+ /*
-+ * Prepare control register value.
-+ */
-+ switch (TIMER_FLAG_MASK_EDGE(flag)) {
-+ default:
-+ case TIMER_FLAG_NONE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x00);
-+ break;
-+ case TIMER_FLAG_RISE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x01);
-+ break;
-+ case TIMER_FLAG_FALL_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x02);
-+ break;
-+ case TIMER_FLAG_ANY_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x03);
-+ break;
-+ }
-+ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
-+ con_reg |=
-+ TIMER_FLAG_MASK_SRC(flag) ==
-+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
-+ GPTU_CON_SRC_EXT_SET(0);
-+ else
-+ con_reg |=
-+ TIMER_FLAG_MASK_SRC(flag) ==
-+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
-+ GPTU_CON_SRC_EG_SET(0);
-+ con_reg |=
-+ TIMER_FLAG_MASK_SYNC(flag) ==
-+ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
-+ GPTU_CON_SYNC_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_INVERT(flag) ==
-+ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_SIZE(flag) ==
-+ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
-+ GPTU_CON_EXT_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_STOP(flag) ==
-+ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+ con_reg |=
-+ TIMER_FLAG_MASK_TYPE(flag) ==
-+ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
-+ GPTU_CON_CNT_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_DIR(flag) ==
-+ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+ /*
-+ * Fill up running data.
-+ */
-+ timer_dev.timer[timer - FIRST_TIMER].flag = flag;
-+ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
-+ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-+
-+ /*
-+ * Enable GPTU module.
-+ */
-+ if (!timer_dev.f_gptu_on) {
-+ lq_enable_gptu();
-+ timer_dev.f_gptu_on = 1;
-+ }
-+
-+ /*
-+ * Enable IRQ.
-+ */
-+ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
-+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
-+ timer_dev.timer[timer - FIRST_TIMER].arg1 =
-+ (unsigned long) find_task_by_vpid((int) arg1);
-+
-+ irnen_reg = 1 << (timer - FIRST_TIMER);
-+
-+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
-+ || (TIMER_FLAG_MASK_HANDLE(flag) ==
-+ TIMER_FLAG_CALLBACK_IN_IRQ
-+ && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
-+ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
-+ }
-+ } else
-+ irnen_reg = 0;
-+
-+ /*
-+ * Write config register, reload value and enable interrupt.
-+ */
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+ *LQ_GPTU_CON(n, X) = con_reg;
-+ *LQ_GPTU_RELOAD(n, X) = value;
-+ /* printk("reload value = %d\n", (u32)value); */
-+ *LQ_GPTU_IRNEN |= irnen_reg;
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ printk("successful!\n");
-+ return ret;
-+}
-+EXPORT_SYMBOL(lq_request_timer);
-+
-+int lq_free_timer(unsigned int timer)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ if (GPTU_CON_EN(n, X))
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
-+ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-+
-+ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
-+ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
-+ }
-+
-+ timer_dev.occupation &= ~mask;
-+ if (!timer_dev.occupation && timer_dev.f_gptu_on) {
-+ lq_disable_gptu();
-+ timer_dev.f_gptu_on = 0;
-+ }
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_free_timer);
-+
-+int lq_start_timer(unsigned int timer, int is_resume)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) ==
-+ TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-+
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_start_timer);
-+
-+int lq_stop_timer(unsigned int timer)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER
-+ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_stop_timer);
-+
-+int lq_reset_counter_flags(u32 timer, u32 flags)
-+{
-+ unsigned int oflag;
-+ unsigned int mask, con_reg;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ switch (TIMER_FLAG_MASK_EDGE(flags)) {
-+ default:
-+ case TIMER_FLAG_NONE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x00);
-+ break;
-+ case TIMER_FLAG_RISE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x01);
-+ break;
-+ case TIMER_FLAG_FALL_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x02);
-+ break;
-+ case TIMER_FLAG_ANY_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x03);
-+ break;
-+ }
-+ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
-+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
-+ else
-+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
-+ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+ timer_dev.timer[timer - FIRST_TIMER].flag = flags;
-+ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
-+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_CON(n, X) = con_reg;
-+ smp_wmb();
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_reset_counter_flags);
-+
-+int lq_get_count_value(unsigned int timer, unsigned long *value)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER
-+ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *value = *LQ_GPTU_COUNT(n, X);
-+
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_get_count_value);
-+
-+u32 lq_cal_divider(unsigned long freq)
-+{
-+ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
-+ u32 clock_divider = 1;
-+ module_freq = fpi * 1000;
-+ do_div(module_freq, clock_divider * freq);
-+ return module_freq;
-+}
-+EXPORT_SYMBOL(lq_cal_divider);
-+
-+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
-+ int is_ext_src, unsigned int handle_flag, unsigned long arg1,
-+ unsigned long arg2)
-+{
-+ unsigned long divider;
-+ unsigned int flag;
-+
-+ divider = lq_cal_divider(freq);
-+ if (divider == 0)
-+ return -EINVAL;
-+ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
-+ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
-+ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
-+ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
-+ | TIMER_FLAG_MASK_HANDLE(handle_flag);
-+
-+ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
-+ timer, freq, divider);
-+ return lq_request_timer(timer, flag, divider, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_timer);
-+
-+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
-+ unsigned long arg1, unsigned long arg2)
-+{
-+ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
-+ return lq_request_timer(timer, flag, reload, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_counter);
-+
-+static long gptu_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int ret;
-+ struct gptu_ioctl_param param;
-+
-+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
-+ return -EFAULT;
-+ copy_from_user(&param, (void *) arg, sizeof(param));
-+
-+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
-+ || GPTU_SET_COUNTER) && param.timer < 2)
-+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+ && !access_ok(VERIFY_WRITE, arg,
-+ sizeof(struct gptu_ioctl_param)))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ case GPTU_REQUEST_TIMER:
-+ ret = lq_request_timer(param.timer, param.flag, param.value,
-+ (unsigned long) param.pid,
-+ (unsigned long) param.sig);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_FREE_TIMER:
-+ ret = lq_free_timer(param.timer);
-+ break;
-+ case GPTU_START_TIMER:
-+ ret = lq_start_timer(param.timer, param.flag);
-+ break;
-+ case GPTU_STOP_TIMER:
-+ ret = lq_stop_timer(param.timer);
-+ break;
-+ case GPTU_GET_COUNT_VALUE:
-+ ret = lq_get_count_value(param.timer, &param.value);
-+ if (!ret)
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ value, &param.value,
-+ sizeof(param.value));
-+ break;
-+ case GPTU_CALCULATE_DIVIDER:
-+ param.value = lq_cal_divider(param.value);
-+ if (param.value == 0)
-+ ret = -EINVAL;
-+ else {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ value, &param.value,
-+ sizeof(param.value));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_SET_TIMER:
-+ ret = lq_set_timer(param.timer, param.value,
-+ TIMER_FLAG_MASK_STOP(param.flag) !=
-+ TIMER_FLAG_ONCE ? 1 : 0,
-+ TIMER_FLAG_MASK_SRC(param.flag) ==
-+ TIMER_FLAG_EXT_SRC ? 1 : 0,
-+ TIMER_FLAG_MASK_HANDLE(param.flag) ==
-+ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
-+ TIMER_FLAG_NO_HANDLE,
-+ (unsigned long) param.pid,
-+ (unsigned long) param.sig);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_SET_COUNTER:
-+ lq_set_counter(param.timer, param.flag, param.value, 0, 0);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ default:
-+ ret = -ENOTTY;
-+ }
-+
-+ return ret;
-+}
-+
-+static int gptu_open(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static int gptu_release(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+int __init lq_gptu_init(void)
-+{
-+ int ret;
-+ unsigned int i;
-+
-+ ltq_w32(0, LQ_GPTU_IRNEN);
-+ ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+ memset(&timer_dev, 0, sizeof(timer_dev));
-+ mutex_init(&timer_dev.gptu_mutex);
-+
-+ lq_enable_gptu();
-+ timer_dev.number_of_timers = GPTU_ID_CFG * 2;
-+ lq_disable_gptu();
-+ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
-+ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
-+ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-+
-+ ret = misc_register(&gptu_miscdev);
-+ if (ret) {
-+ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
-+ return ret;
-+ } else {
-+ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
-+ }
-+
-+ for (i = 0; i < timer_dev.number_of_timers; i++) {
-+ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
-+ if (ret) {
-+ for (; i >= 0; i--)
-+ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
-+ misc_deregister(&gptu_miscdev);
-+ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
-+ return ret;
-+ } else {
-+ timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
-+ disable_irq(timer_dev.timer[i].irq);
-+ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+void __exit lq_gptu_exit(void)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < timer_dev.number_of_timers; i++) {
-+ if (timer_dev.timer[i].f_irq_on)
-+ disable_irq(timer_dev.timer[i].irq);
-+ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
-+ }
-+ lq_disable_gptu();
-+ misc_deregister(&gptu_miscdev);
-+}
-+
-+module_init(lq_gptu_init);
-+module_exit(lq_gptu_exit);
-+
-+#endif
diff --git a/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch
deleted file mode 100644
index 8a5d270b09..0000000000
--- a/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:38:15 +0200
-Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux
-
-We found out how to set the gphy led pinmuxing.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++--
- 1 file changed, 26 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_de
- .confops = &xway_pinconf_ops,
- };
-
--static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+static int mux_apply(struct ltq_pinmux_info *info,
- int pin, int mux)
- {
-- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
- int port = PORT(pin);
- u32 alt1_reg = GPIO_ALT1(pin);
-
-@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct
- return 0;
- }
-
-+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+ int pin, int mux)
-+{
-+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return mux_apply(info, pin, mux);
-+}
-+
- static const struct ltq_cfg_param xway_cfg_params[] = {
- {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
- {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -696,6 +703,18 @@ static void xway_gpio_free(struct gpio_c
- pinctrl_free_gpio(gpio);
- }
-
-+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-+ int i;
-+
-+ for (i = 0; i < info->num_exin; i++)
-+ if (info->exin[i] == offset)
-+ return ltq_eiu_get_irq(i);
-+
-+ return -1;
-+}
-+
- static struct gpio_chip xway_chip = {
- .label = "gpio-xway",
- .direction_input = xway_gpio_dir_in,
-@@ -704,6 +723,7 @@ static struct gpio_chip xway_chip = {
- .set = xway_gpio_set,
- .request = xway_gpio_req,
- .free = xway_gpio_free,
-+ .to_irq = xway_gpio_to_irq,
- .base = -1,
- };
-
diff --git a/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch
deleted file mode 100644
index c6d3819c2f..0000000000
--- a/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:03:54 +0200
-Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator
-
-xway_read_byte should use a logic or and not an add operator when working out
-the nand address.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru
- int ret;
-
- spin_lock_irqsave(&ebu_lock, flags);
-- ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
-+ ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
- spin_unlock_irqrestore(&ebu_lock, flags);
-
- return ret;
diff --git a/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
deleted file mode 100644
index 6a7785b016..0000000000
--- a/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:06:39 +0200
-Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
- persistent
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,6 +54,8 @@
- #define NAND_CON_CSMUX (1 << 1)
- #define NAND_CON_NANDM 1
-
-+static u32 xway_latchcmd;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf
- unsigned long flags;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-- nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
- if (ctrl & NAND_CLE)
-- nandaddr |= NAND_WRITE_CMD;
-- else
-- nandaddr |= NAND_WRITE_ADDR;
-- this->IO_ADDR_W = (void __iomem *) nandaddr;
-+ xway_latchcmd = NAND_WRITE_CMD;
-+ else if (ctrl & NAND_ALE)
-+ xway_latchcmd = NAND_WRITE_ADDR;
- }
-
- if (cmd != NAND_CMD_NONE) {
- spin_lock_irqsave(&ebu_lock, flags);
-- writeb(cmd, this->IO_ADDR_W);
-+ writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
- spin_unlock_irqrestore(&ebu_lock, flags);
diff --git a/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch
deleted file mode 100644
index 4bd166863b..0000000000
--- a/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 18:02:06 +0200
-Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
-
-The reset loop logic could run into a endless loop. Lets fix it as requested.
-
---> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
- static void xway_reset_chip(struct nand_chip *chip)
- {
- unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-+ unsigned long timeout;
- unsigned long flags;
-
- nandaddr &= ~NAND_WRITE_ADDR;
- nandaddr |= NAND_WRITE_CMD;
-
- /* finish with a reset */
-+ timeout = jiffies + msecs_to_jiffies(20);
-+
- spin_lock_irqsave(&ebu_lock, flags);
- writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
-- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-- ;
-+ do {
-+ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+ break;
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
- spin_unlock_irqrestore(&ebu_lock, flags);
- }
-
diff --git a/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
deleted file mode 100644
index f20878cd25..0000000000
--- a/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 17:59:51 +0200
-Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf
- to nand driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru
- return ret;
- }
-
-+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&ebu_lock, flags);
-+ for (i = 0; i < len; i++)
-+ buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-+ spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
-+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&ebu_lock, flags);
-+ for (i = 0; i < len; i++)
-+ ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
-+ spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
- static int xway_nand_probe(struct platform_device *pdev)
- {
- struct nand_chip *this = platform_get_drvdata(pdev);
-@@ -181,6 +207,8 @@ static struct platform_nand_data xway_na
- .dev_ready = xway_dev_ready,
- .select_chip = xway_select_chip,
- .read_byte = xway_read_byte,
-+ .read_buf = xway_read_buf,
-+ .write_buf = xway_write_buf,
- }
- };
-
diff --git a/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch
deleted file mode 100644
index 737469aab5..0000000000
--- a/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:55:31 +0200
-Subject: [PATCH 17/36] MTD: xway: fix nand locking
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 15 +++------------
- 1 file changed, 3 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -80,13 +80,16 @@ static void xway_reset_chip(struct nand_
-
- static void xway_select_chip(struct mtd_info *mtd, int chip)
- {
-+ static unsigned long csflags;
-
- switch (chip) {
- case -1:
- ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
- ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
-+ spin_unlock_irqrestore(&ebu_lock, csflags);
- break;
- case 0:
-+ spin_lock_irqsave(&ebu_lock, csflags);
- ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
- ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
- break;
-@@ -99,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf
- {
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-- unsigned long flags;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
-@@ -109,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf
- }
-
- if (cmd != NAND_CMD_NONE) {
-- spin_lock_irqsave(&ebu_lock, flags);
- writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
-- spin_unlock_irqrestore(&ebu_lock, flags);
- }
- }
-
-@@ -126,12 +126,9 @@ static unsigned char xway_read_byte(stru
- {
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-- unsigned long flags;
- int ret;
-
-- spin_lock_irqsave(&ebu_lock, flags);
- ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-- spin_unlock_irqrestore(&ebu_lock, flags);
-
- return ret;
- }
-@@ -140,26 +137,20 @@ static void xway_read_buf(struct mtd_inf
- {
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-- unsigned long flags;
- int i;
-
-- spin_lock_irqsave(&ebu_lock, flags);
- for (i = 0; i < len; i++)
- buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-- spin_unlock_irqrestore(&ebu_lock, flags);
- }
-
- static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
- {
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-- unsigned long flags;
- int i;
-
-- spin_lock_irqsave(&ebu_lock, flags);
- for (i = 0; i < len; i++)
- ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
-- spin_unlock_irqrestore(&ebu_lock, flags);
- }
-
- static int xway_nand_probe(struct platform_device *pdev)
diff --git a/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch
deleted file mode 100644
index 5500861c22..0000000000
--- a/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 23:12:15 +0200
-Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 63 insertions(+)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,8 +54,27 @@
- #define NAND_CON_CSMUX (1 << 1)
- #define NAND_CON_NANDM 1
-
-+#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr))
-+#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
-+#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080)
-+
- static u32 xway_latchcmd;
-
-+/*
-+ * req_mask provides a mechanism to prevent interference between
-+ * nand and pci (probably only relevant for the BT Home Hub 2B).
-+ * Setting it causes the corresponding pci req pins to be masked
-+ * during nand access, and also moves ebu locking from the read/write
-+ * functions to the chip select function to ensure that the whole
-+ * operation runs with interrupts disabled.
-+ * In addition it switches on some extra waiting in xway_cmd_ctrl().
-+ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
-+ * which in turn seems to be necessary for the nor chip to be recognised
-+ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
-+ */
-+
-+static __be32 req_mask = 0;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_
- case -1:
- ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
- ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
-+
-+ if (req_mask) {
-+ /* Unmask all external PCI request */
-+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
-+ }
- spin_unlock_irqrestore(&ebu_lock, csflags);
-+
- break;
- case 0:
- spin_lock_irqsave(&ebu_lock, csflags);
-+ if (req_mask) {
-+ /* Mask all external PCI request */
-+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
-+ }
-+
- ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
- ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
-+
- break;
- default:
- BUG();
-@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-
-+ if (req_mask) {
-+ if (cmd != NAND_CMD_STATUS)
-+ ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */
-+ }
-+
-+
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
- xway_latchcmd = NAND_WRITE_CMD;
-@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf
- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
- }
-+
-+ if (req_mask) {
-+ /*
-+ * program and erase have their own busy handlers
-+ * status and sequential in needs no delay
-+ */
-+ switch (cmd) {
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_READID:
-+ return;
-+ }
-+
-+ /* wait until command is processed */
-+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
-+ ;
-+ }
- }
-
- static int xway_dev_ready(struct mtd_info *mtd)
-@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo
- {
- struct nand_chip *this = platform_get_drvdata(pdev);
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node,
-+ "req-mask", NULL);
- const __be32 *cs = of_get_property(pdev->dev.of_node,
- "lantiq,cs", NULL);
- u32 cs_flag = 0;
-@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo
- if (cs && (*cs == 1))
- cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
-
-+ /*
-+ * Load the PCI req lines to mask from the device tree. If the
-+ * property is not present, setting req_mask to 0 disables masking.
-+ */
-+ req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
-+
- /* setup the EBU to run in NAND mode on our base addr */
- ltq_ebu_w32(CPHYSADDR(nandaddr)
- | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
diff --git a/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
deleted file mode 100644
index 36a899d4f8..0000000000
--- a/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:18:00 +0200
-Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/lantiq-flash.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -139,7 +139,11 @@ ltq_mtd_probe(struct platform_device *pd
- if (!ltq_mtd->map)
- return -ENOMEM;
-
-- ltq_mtd->map->phys = ltq_mtd->res->start;
-+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+ ltq_mtd->map->phys = NO_XIP;
-+ else
-+ ltq_mtd->map->phys = ltq_mtd->res->start;
-+ ltq_mtd->res->start;
- ltq_mtd->map->size = resource_size(ltq_mtd->res);
- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
- if (IS_ERR(ltq_mtd->map->virt))
diff --git a/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
deleted file mode 100644
index 25f3fff213..0000000000
--- a/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:40:18 +0200
-Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
-
-In accordance with the physmap flash we should honour the linux,mtd-name
-property when deciding what name the mtd device has.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/devices/m25p80.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -19,6 +19,7 @@
- #include <linux/errno.h>
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/of.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -182,6 +183,10 @@ static int m25p_probe(struct spi_device
- enum read_mode mode = SPI_NOR_NORMAL;
- char *flash_name = NULL;
- int ret;
-+ const char __maybe_unused *of_mtd_name = NULL;
-+
-+ of_property_read_string(spi->dev.of_node,
-+ "linux,mtd-name", &of_mtd_name);
-
- data = dev_get_platdata(&spi->dev);
-
-@@ -212,6 +217,8 @@ static int m25p_probe(struct spi_device
-
- if (data && data->name)
- nor->mtd.name = data->name;
-+ else if (of_mtd_name)
-+ nor->mtd.name = of_mtd_name;
-
- /* For some (historical?) reason many platforms provide two different
- * names in flash_platform_data: "name" and "type". Quite often name is
diff --git a/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
deleted file mode 100644
index 3f50a3b262..0000000000
--- a/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ /dev/null
@@ -1,537 +0,0 @@
-From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:15:36 +0200
-Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/Kconfig | 5 +
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 237 insertions(+)
- create mode 100644 drivers/net/phy/lantiq.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -165,6 +165,11 @@ config RTL8306_PHY
- tristate "Driver for Realtek RTL8306S switches"
- select SWCONFIG
-
-+config LANTIQ_PHY
-+ tristate "Driver for Lantiq PHYs"
-+ ---help---
-+ Supports the 11G and 22E PHYs.
-+
- config FIXED_PHY
- tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
- obj-$(CONFIG_DP83640_PHY) += dp83640.o
- obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
-+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
---- /dev/null
-+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,278 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/of.h>
-+
-+#define MII_MMDCTRL 0x0d
-+#define MII_MMDDATA 0x0e
-+
-+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
-+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
-+
-+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
-+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
-+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
-+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
-+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
-+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
-+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
-+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
-+
-+#define ADVERTISED_MPD BIT(10) /* Multi-port device */
-+
-+#define MMD_DEVAD 0x1f
-+#define MMD_ACTYPE_SHIFT 14
-+#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT)
-+
-+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
-+ u16 regnum)
-+{
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, regnum);
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+
-+ return phy_read(phydev, MII_MMDDATA);
-+}
-+
-+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
-+ u16 regnum, u16 val)
-+{
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, regnum);
-+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+ phy_write(phydev, MII_MMDDATA, val);
-+
-+ return 0;
-+}
-+
-+#if IS_ENABLED(CONFIG_OF_MDIO)
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+ u32 tmp;
-+
-+ /* store the led values if one was passed by the devicetree */
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
-+
-+ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
-+ vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
-+
-+ return 0;
-+}
-+#else
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+ return 0;
-+}
-+#endif /* CONFIG_OF_MDIO */
-+
-+static int vr9_gphy_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+
-+ dev_dbg(&phydev->dev, "%s\n", __func__);
-+
-+ /* Mask all interrupts */
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+ if (err)
-+ return err;
-+
-+ /* Clear all pending interrupts */
-+ phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
-+ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
-+ vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
-+ vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
-+ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
-+ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
-+ vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
-+ vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
-+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
-+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
-+
-+ vr9_gphy_of_reg_init(phydev);
-+
-+ return 0;
-+}
-+
-+static int vr9_gphy_config_aneg(struct phy_device *phydev)
-+{
-+ int reg, err;
-+
-+ /* Advertise as multi-port device */
-+ reg = phy_read(phydev, MII_CTRL1000);
-+ reg |= ADVERTISED_MPD;
-+ err = phy_write(phydev, MII_CTRL1000, reg);
-+ if (err)
-+ return err;
-+
-+ return genphy_config_aneg(phydev);
-+}
-+
-+static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
-+{
-+ int reg;
-+
-+ /*
-+ * Possible IRQ numbers:
-+ * - IM3_IRL18 for GPHY0
-+ * - IM3_IRL17 for GPHY1
-+ *
-+ * Due to a silicon bug IRQ lines are not really independent from
-+ * each other. Sometimes the two lines are driven at the same time
-+ * if only one GPHY core raises the interrupt.
-+ */
-+
-+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ return (reg < 0) ? reg : 0;
-+}
-+
-+static int vr9_gphy_did_interrupt(struct phy_device *phydev)
-+{
-+ int reg;
-+
-+ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+ return reg > 0;
-+}
-+
-+static int vr9_gphy_config_intr(struct phy_device *phydev)
-+{
-+ int err;
-+
-+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
-+ else
-+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+
-+ return err;
-+}
-+
-+static struct phy_driver lantiq_phy[] = {
-+ {
-+ .phy_id = 0xd565a400,
-+ .phy_id_mask = 0xfffffff8,
-+ .name = "Lantiq XWAY PEF7071",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0x030260D0,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "Lantiq XWAY VR9 GPHY 11G v1.3",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0xd565a408,
-+ .phy_id_mask = 0xfffffff8,
-+ .name = "Lantiq XWAY VR9 GPHY 11G v1.4",
-+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ }, {
-+ .phy_id = 0xd565a418,
-+ .phy_id_mask = 0xfffffff8,
-+ .name = "Lantiq XWAY XRX PHY22F v1.4",
-+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
-+ .flags = 0, /*PHY_HAS_INTERRUPT,*/
-+ .config_init = vr9_gphy_config_init,
-+ .config_aneg = vr9_gphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = vr9_gphy_ack_interrupt,
-+ .did_interrupt = vr9_gphy_did_interrupt,
-+ .config_intr = vr9_gphy_config_intr,
-+ .driver = { .owner = THIS_MODULE },
-+ },
-+};
-+
-+static int __init ltq_phy_init(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
-+ int err = phy_driver_register(&lantiq_phy[i]);
-+ if (err)
-+ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit ltq_phy_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
-+ phy_driver_unregister(&lantiq_phy[i]);
-+}
-+
-+module_init(ltq_phy_init);
-+module_exit(ltq_phy_exit);
-+
-+MODULE_DESCRIPTION("Lantiq PHY drivers");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
-@@ -0,0 +1,216 @@
-+Lanitq PHY binding
-+============================================
-+
-+This devicetree binding controls the lantiq ethernet phys led functionality.
-+
-+Example:
-+ mdio@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "lantiq,xrx200-mdio";
-+ phy5: ethernet-phy@5 {
-+ reg = <0x1>;
-+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-+ };
-+ phy11: ethernet-phy@11 {
-+ reg = <0x11>;
-+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+ lantiq,led2h = <0x00>;
-+ lantiq,led2l = <0x03>;
-+ };
-+ phy12: ethernet-phy@12 {
-+ reg = <0x12>;
-+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+ lantiq,led1h = <0x00>;
-+ lantiq,led1l = <0x03>;
-+ };
-+ phy13: ethernet-phy@13 {
-+ reg = <0x13>;
-+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+ lantiq,led2h = <0x00>;
-+ lantiq,led2l = <0x03>;
-+ };
-+ phy14: ethernet-phy@14 {
-+ reg = <0x14>;
-+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+ lantiq,led1h = <0x00>;
-+ lantiq,led1l = <0x03>;
-+ };
-+ };
-+
-+Register Description
-+============================================
-+
-+LEDCH:
-+
-+Name Hardware Reset Value
-+LEDCH 0x00C5
-+
-+| 15 | | | | | | | 8 |
-+=========================================
-+| RES |
-+=========================================
-+
-+| 7 | | | | | | | 0 |
-+=========================================
-+| FBF | SBF |RES | NACS |
-+=========================================
-+
-+Field Bits Type Description
-+FBC 7:6 RW Fast Blink Frequency
-+ ---
-+ 0x0 (00b) F02HZ 2 Hz blinking frequency
-+ 0x1 (01b) F04HZ 4 Hz blinking frequency
-+ 0x2 (10b) F08HZ 8 Hz blinking frequency
-+ 0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+SBF 5:4 RW Slow Blink Frequency
-+ ---
-+ 0x0 (00b) F02HZ 2 Hz blinking frequency
-+ 0x1 (01b) F04HZ 4 Hz blinking frequency
-+ 0x2 (10b) F08HZ 8 Hz blinking frequency
-+ 0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+NACS 2:0 RW Inverse of Scan Function
-+ ---
-+ 0x0 (000b) NONE No Function
-+ 0x1 (001b) LINK Complex function enabled when link is up
-+ 0x2 (010b) PDOWN Complex function enabled when device is powered-down
-+ 0x3 (011b) EEE Complex function enabled when device is in EEE mode
-+ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
-+ 0x5 (101b) ABIST Complex function enabled when analog self-test is running
-+ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
-+ 0x7 (111b) TEST Complex function enabled when test mode is running
-+
-+LEDCL:
-+
-+Name Hardware Reset Value
-+LEDCL 0x0067
-+
-+| 15 | | | | | | | 8 |
-+=========================================
-+| RES |
-+=========================================
-+
-+| 7 | | | | | | | 0 |
-+=========================================
-+|RES | SCAN |RES | CBLINK |
-+=========================================
-+
-+Field Bits Type Description
-+SCAN 6:4 RW Complex Scan Configuration
-+ ---
-+ 000 B NONE No Function
-+ 001 B LINK Complex function enabled when link is up
-+ 010 B PDOWN Complex function enabled when device is powered-down
-+ 011 B EEE Complex function enabled when device is in EEE mode
-+ 100 B ANEG Complex function enabled when auto-negotiation is running
-+ 101 B ABIST Complex function enabled when analog self-test is running
-+ 110 B CDIAG Complex function enabled when cable diagnostics are running
-+ 111 B TEST Complex function enabled when test mode is running
-+
-+CBLINK 2:0 RW Complex Blinking Configuration
-+ ---
-+ 000 B NONE No Function
-+ 001 B LINK Complex function enabled when link is up
-+ 010 B PDOWN Complex function enabled when device is powered-down
-+ 011 B EEE Complex function enabled when device is in EEE mode
-+ 100 B ANEG Complex function enabled when auto-negotiation is running
-+ 101 B ABIST Complex function enabled when analog self-test is running
-+ 110 B CDIAG Complex function enabled when cable diagnostics are running
-+ 111 B TEST Complex function enabled when test mode is running
-+
-+LEDxH:
-+
-+Name Hardware Reset Value
-+LED0H 0x0070
-+LED1H 0x0020
-+LED2H 0x0040
-+LED3H 0x0040
-+
-+| 15 | | | | | | | 8 |
-+=========================================
-+| RES |
-+=========================================
-+
-+| 7 | | | | | | | 0 |
-+=========================================
-+| CON | BLINKF |
-+=========================================
-+
-+Field Bits Type Description
-+CON 7:4 RW Constant On Configuration
-+ ---
-+ 0x0 (0000b) NONE LED does not light up constantly
-+ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
-+ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
-+ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
-+ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
-+ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
-+ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
-+ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
-+ 0x8 (1000b) PDOWN LED is on when device is powered-down
-+ 0x9 (1001b) EEE LED is on when device is in EEE mode
-+ 0xA (1010b) ANEG LED is on when auto-negotiation is running
-+ 0xB (1011b) ABIST LED is on when analog self-test is running
-+ 0xC (1100b) CDIAG LED is on when cable diagnostics are running
-+
-+BLINKF 3:0 RW Fast Blinking Configuration
-+ ---
-+ 0x0 (0000b) NONE No Blinking
-+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+ 0x8 (1000b) PDOWN Blink when device is powered-down
-+ 0x9 (1001b) EEE Blink when device is in EEE mode
-+ 0xA (1010b) ANEG Blink when auto-negotiation is running
-+ 0xB (1011b) ABIST Blink when analog self-test is running
-+ 0xC (1100b) CDIAG Blink when cable diagnostics are running
-+
-+LEDxL:
-+
-+Name Hardware Reset Value
-+LED0L 0x0003
-+LED1L 0x0000
-+LED2L 0x0000
-+LED3L 0x0020
-+
-+| 15 | | | | | | | 8 |
-+=========================================
-+| RES |
-+=========================================
-+
-+| 7 | | | | | | | 0 |
-+=========================================
-+| BLINKS | PULSE |
-+=========================================
-+
-+Field Bits Type Description
-+BLINKS 7:4 RW Slow Blinkin Configuration
-+ ---
-+ 0x0 (0000b) NONE No Blinking
-+ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+ 0x8 (1000b) PDOWN Blink when device is powered-down
-+ 0x9 (1001b) EEE Blink when device is in EEE mode
-+ 0xA (1010b) ANEG Blink when auto-negotiation is running
-+ 0xB (1011b) ABIST Blink when analog self-test is running
-+ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning
-+
-+PULSE 3:0 RW Pulsing Configuration
-+ The pulse field is a mask field by which certain events can be combined
-+ ---
-+ 0x0 (0000b) NONE No pulsing
-+ 0x1 (0001b) TXACT Transmit activity
-+ 0x2 (0010b) RXACT Receive activity
-+ 0x4 (0100b) COL Collision
-+ 0x8 (1000b) RES Reserved
diff --git a/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
deleted file mode 100644
index b69b2a900f..0000000000
--- a/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- firmware/Makefile | 4 +
- firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README | 45 ++++++++
- 3 files changed, 335 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
-
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+ GNU GENERAL PUBLIC LICENSE
-+ Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+ Preamble
-+
-+ The licenses for most software are designed to take away your
-+freedom to share and change it. By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users. This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it. (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.) You can apply it to
-+your programs, too.
-+
-+ When we speak of free software, we are referring to freedom, not
-+price. Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+ To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+ For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have. You must make sure that they, too, receive or can get the
-+source code. And you must show them these terms so they know their
-+rights.
-+
-+ We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+ Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software. If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+ Finally, any free program is threatened constantly by software
-+patents. We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary. To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+ The precise terms and conditions for copying, distribution and
-+modification follow.
-+
-+ GNU GENERAL PUBLIC LICENSE
-+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+ 0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License. The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language. (Hereinafter, translation is included without limitation in
-+the term "modification".) Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope. The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+ 1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+ 2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+ a) You must cause the modified files to carry prominent notices
-+ stating that you changed the files and the date of any change.
-+
-+ b) You must cause any work that you distribute or publish, that in
-+ whole or in part contains or is derived from the Program or any
-+ part thereof, to be licensed as a whole at no charge to all third
-+ parties under the terms of this License.
-+
-+ c) If the modified program normally reads commands interactively
-+ when run, you must cause it, when started running for such
-+ interactive use in the most ordinary way, to print or display an
-+ announcement including an appropriate copyright notice and a
-+ notice that there is no warranty (or else, saying that you provide
-+ a warranty) and that users may redistribute the program under
-+ these conditions, and telling the user how to view a copy of this
-+ License. (Exception: if the Program itself is interactive but
-+ does not normally print such an announcement, your work based on
-+ the Program is not required to print an announcement.)
-+
-+These requirements apply to the modified work as a whole. If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works. But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+ 3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+ a) Accompany it with the complete corresponding machine-readable
-+ source code, which must be distributed under the terms of Sections
-+ 1 and 2 above on a medium customarily used for software interchange; or,
-+
-+ b) Accompany it with a written offer, valid for at least three
-+ years, to give any third party, for a charge no more than your
-+ cost of physically performing source distribution, a complete
-+ machine-readable copy of the corresponding source code, to be
-+ distributed under the terms of Sections 1 and 2 above on a medium
-+ customarily used for software interchange; or,
-+
-+ c) Accompany it with the information you received as to the offer
-+ to distribute corresponding source code. (This alternative is
-+ allowed only for noncommercial distribution and only if you
-+ received the program in object code or executable form with such
-+ an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it. For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable. However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+
-+ 4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License. Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+ 5. You are not required to accept this License, since you have not
-+signed it. However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works. These actions are
-+prohibited by law if you do not accept this License. Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+ 6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions. You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+ 7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License. If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all. For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices. Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+
-+ 8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded. In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+ 9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time. Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number. If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation. If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+ 10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission. For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this. Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+ NO WARRANTY
-+
-+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+ END OF TERMS AND CONDITIONS
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/vr9_phy11g_a1x.bin
-+lantiq/vr9_phy22f_a1x.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.2
-+lantiq/vr9_phy11g_a2x.bin
-+lantiq/vr9_phy22f_a2x.bin
diff --git a/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
deleted file mode 100644
index 8784b5b505..0000000000
--- a/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ /dev/null
@@ -1,3340 +0,0 @@
-From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
-
----
- drivers/net/ethernet/Kconfig | 8 +-
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_pce.h | 163 +++
- drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
- 5 files changed, 3297 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -101,7 +101,13 @@ config LANTIQ_ETOP
- tristate "Lantiq SoC ETOP driver"
- depends on SOC_TYPE_XWAY
- ---help---
-- Support for the MII0 inside the Lantiq SoC
-+ Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200
-+ tristate "Lantiq SoC XRX200 driver"
-+ depends on SOC_TYPE_XWAY
-+ ---help---
-+ Support for the MII0 inside the Lantiq VDSL SoC
-
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_IP1000) += icplus/
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+ OUT_MAC0 = 0,
-+ OUT_MAC1,
-+ OUT_MAC2,
-+ OUT_MAC3,
-+ OUT_MAC4,
-+ OUT_MAC5,
-+ OUT_ETHTYP,
-+ OUT_VTAG0,
-+ OUT_VTAG1,
-+ OUT_ITAG0,
-+ OUT_ITAG1, /*10 */
-+ OUT_ITAG2,
-+ OUT_ITAG3,
-+ OUT_IP0,
-+ OUT_IP1,
-+ OUT_IP2,
-+ OUT_IP3,
-+ OUT_SIP0,
-+ OUT_SIP1,
-+ OUT_SIP2,
-+ OUT_SIP3, /*20*/
-+ OUT_SIP4,
-+ OUT_SIP5,
-+ OUT_SIP6,
-+ OUT_SIP7,
-+ OUT_DIP0,
-+ OUT_DIP1,
-+ OUT_DIP2,
-+ OUT_DIP3,
-+ OUT_DIP4,
-+ OUT_DIP5, /*30*/
-+ OUT_DIP6,
-+ OUT_DIP7,
-+ OUT_SESID,
-+ OUT_PROT,
-+ OUT_APP0,
-+ OUT_APP1,
-+ OUT_IGMP0,
-+ OUT_IGMP1,
-+ OUT_IPOFF, /*39*/
-+ OUT_NONE = 63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR 0
-+#define IPV6 1
-+#define LENACCU 2
-+
-+/* parser's microcode flag type */
-+enum {
-+ FLAG_ITAG = 0,
-+ FLAG_VLAN,
-+ FLAG_SNAP,
-+ FLAG_PPPOE,
-+ FLAG_IPV6,
-+ FLAG_IPV6FL,
-+ FLAG_IPV4,
-+ FLAG_IGMP,
-+ FLAG_TU,
-+ FLAG_HOP,
-+ FLAG_NN1, /*10 */
-+ FLAG_NN2,
-+ FLAG_END,
-+ FLAG_NO, /*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+ unsigned short val[4];
-+/* unsigned short val_2;
-+ unsigned short val_1;
-+ unsigned short val_0;*/
-+} pce_microcode[] = {
-+ /* value mask ns fields L type flags ipv4_len */
-+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
-+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
-+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
-+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1797 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/switch.h>
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_sw.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+/* #define SW_PORTMAP */
-+
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+#define XRX200_MAX_DEV 2
-+ #else
-+#define XRX200_MAX_DEV 2
-+ #endif
-+#else
-+#define XRX200_MAX_DEV 1
-+#endif
-+
-+#define XRX200_MAX_VLAN 64
-+#define XRX200_PCE_ACTVLAN_IDX 0x01
-+#define XRX200_PCE_VLANMAP_IDX 0x02
-+
-+#define XRX200_MAX_PORT 7
-+#define XRX200_MAX_DMA 8
-+
-+#define XRX200_HEADROOM 4
-+
-+#define XRX200_TX_TIMEOUT (10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY 1
-+#define XRX200_PORT_TYPE_MAC 2
-+
-+/* DMA */
-+#define XRX200_DMA_DATA_LEN 0x600
-+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX 0
-+#define XRX200_DMA_TX 1
-+#define XRX200_DMA_IS_TX(x) (x%2)
-+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0 0x2A00
-+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0 0x2F00
-+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0 0x200
-+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB 0x0000
-+#define MDIO_CTRL 0x0020
-+#define MDIO_READ 0x0024
-+#define MDIO_WRITE 0x0028
-+#define MDIO_PHY0 0x0054
-+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0 0x002C
-+#define MDIO_CLK_CFG1 0x0030
-+
-+#define MDIO_GLOB_ENABLE 0x8000
-+#define MDIO_BUSY BIT(12)
-+#define MDIO_RD BIT(11)
-+#define MDIO_WR BIT(10)
-+#define MDIO_MASK 0x1f
-+#define MDIO_ADDRSHIFT 5
-+#define MDIO1_25MHZ 9
-+
-+#define MDIO_PHY_LINK_DOWN 0x4000
-+#define MDIO_PHY_LINK_UP 0x2000
-+
-+#define MDIO_PHY_SPEED_M10 0x0000
-+#define MDIO_PHY_SPEED_M100 0x0800
-+#define MDIO_PHY_SPEED_G1 0x1000
-+
-+#define MDIO_PHY_FDUP_EN 0x0200
-+#define MDIO_PHY_FDUP_DIS 0x0600
-+
-+#define MDIO_PHY_LINK_MASK 0x6000
-+#define MDIO_PHY_SPEED_MASK 0x1800
-+#define MDIO_PHY_FDUP_MASK 0x0600
-+#define MDIO_PHY_ADDR_MASK 0x001f
-+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p) (p * 8)
-+
-+#define MII_CFG_EN BIT(14)
-+
-+#define MII_CFG_MODE_MIIP 0x0
-+#define MII_CFG_MODE_MIIM 0x1
-+#define MII_CFG_MODE_RMIIP 0x2
-+#define MII_CFG_MODE_RMIIM 0x3
-+#define MII_CFG_MODE_RGMII 0x4
-+#define MII_CFG_MODE_MASK 0xf
-+
-+#define MII_CFG_RATE_M2P5 0x00
-+#define MII_CFG_RATE_M25 0x10
-+#define MII_CFG_RATE_M125 0x20
-+#define MII_CFG_RATE_M50 0x30
-+#define MII_CFG_RATE_AUTO 0x40
-+#define MII_CFG_RATE_MASK 0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL 0x0000
-+#define PMAC_RX_IPG 0x0024
-+#define PMAC_EWAN 0x002c
-+
-+#define PMAC_IPG_MASK 0xf
-+#define PMAC_HD_CTL_AS 0x0008
-+#define PMAC_HD_CTL_AC 0x0004
-+#define PMAC_HD_CTL_RC 0x0010
-+#define PMAC_HD_CTL_RXSH 0x0040
-+#define PMAC_HD_CTL_AST 0x0080
-+#define PMAC_HD_CTL_RST 0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK 0x1120
-+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR 0x1138
-+#define PCE_TBL_CTRL 0x113c
-+#define PCE_PMAP1 0x114c
-+#define PCE_PMAP2 0x1150
-+#define PCE_PMAP3 0x1154
-+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK 0x1f
-+#define PCE_TBL_CFG_ADWR 0x20
-+#define PCE_TBL_CFG_ADWR_MASK 0x60
-+#define PCE_INGRESS BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG (0x2314)
-+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p) (0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT 24
-+#define DPID_SHIFT 16
-+#define DPID_ENABLE 1
-+#define SPID_CPU_PORT 2
-+#define PORT_MAP_SEL BIT(15)
-+#define PORT_MAP_EN BIT(14)
-+#define PORT_MAP_SHIFT 1
-+#define PORT_MAP_MASK 0x3f
-+
-+#define SPPID_MASK 0x7
-+#define SPPID_SHIFT 4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE (-1)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+struct xrx200_port {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+
-+ int link;
-+ int gpio;
-+ enum of_gpio_flags gpio_flags;
-+
-+ struct phy_device *phydev;
-+ struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+ int idx;
-+ int refcount;
-+ int tx_free;
-+
-+ struct net_device dummy_dev;
-+ struct net_device *devs[XRX200_MAX_DEV];
-+
-+ struct tasklet_struct tasklet;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct xrx200_hw {
-+ struct clk *clk;
-+ struct mii_bus *mii_bus;
-+
-+ struct xrx200_chan chan[XRX200_MAX_DMA];
-+
-+ struct net_device *devs[XRX200_MAX_DEV];
-+ int num_devs;
-+
-+ int port_map[XRX200_MAX_PORT];
-+ unsigned short wan_map;
-+
-+ spinlock_t lock;
-+
-+ struct switch_dev swdev;
-+};
-+
-+struct xrx200_priv {
-+ struct net_device_stats stats;
-+ int id;
-+
-+ struct xrx200_port port[XRX200_MAX_PORT];
-+ int num_port;
-+ bool wan;
-+ bool sw;
-+ unsigned short port_map;
-+ unsigned char mac[6];
-+
-+ struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+#define XRX200_GLOBAL_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_global_attr, \
-+ .get = xrx200_get_global_attr
-+
-+#define XRX200_PORT_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_port_attr, \
-+ .get = xrx200_get_port_attr
-+
-+static int xrx200sw_read_x(int reg, int x)
-+{
-+ int value, mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ value = ltq_switch_r32(addr);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ value = (value >> xrx200sw_reg[reg].shift);
-+
-+ return (value & mask);
-+}
-+
-+static int xrx200sw_read(int reg)
-+{
-+ return xrx200sw_read_x(reg, 0);
-+}
-+
-+static void xrx200sw_write_x(int value, int reg, int x)
-+{
-+ int mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ mask = (mask << xrx200sw_reg[reg].shift);
-+ value = (value << xrx200sw_reg[reg].shift) & mask;
-+
-+ ltq_switch_w32_mask(mask, value, addr);
-+}
-+
-+static void xrx200sw_write(int value, int reg)
-+{
-+ xrx200sw_write_x(value, reg, 0);
-+}
-+
-+struct xrx200_pce_table_entry {
-+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
-+ int table; // PCE_TBL_CTRL.ADDR = pData->table
-+ unsigned short key[8];
-+ unsigned short val[5];
-+ unsigned short mask;
-+ unsigned short type;
-+ unsigned short valid;
-+ unsigned short gmap;
-+};
-+
-+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based read)
-+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // read the keys
-+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
-+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
-+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
-+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
-+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
-+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
-+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
-+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
-+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
-+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
-+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
-+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ return 0;
-+}
-+
-+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based write)
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ // read the keys
-+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
-+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
-+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
-+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
-+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
-+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
-+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
-+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
-+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
-+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
-+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
-+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ return 0;
-+}
-+
-+static void xrx200sw_fixup_pvids(void)
-+{
-+ int index, p, portmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+ struct xrx200_pce_table_entry tev;
-+
-+ portmap = 0;
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ portmap |= BIT(p);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (index = XRX200_MAX_VLAN; index-- > 0;)
-+ {
-+ tev.index = index;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.valid == 0)
-+ continue;
-+
-+ tem.index = index;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (untagged & BIT(p))
-+ {
-+ portmap &= ~BIT(p);
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (portmap & BIT(p))
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+}
-+
-+// swconfig interface
-+static void xrx200_hw_init(struct xrx200_hw *hw);
-+
-+// global
-+static int xrx200sw_reset_switch(struct switch_dev *dev)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ xrx200_hw_init(hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ int p;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++) {
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
-+ }
-+
-+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
-+ return 0;
-+}
-+
-+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write(val->value.i, attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+// vlan
-+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ int i;
-+ struct xrx200_pce_table_entry tev;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tev.index = i;
-+ xrx200_pce_table_entry_read(&tev);
-+ if (tev.key[0] == val->value.i && i != val->port_vlan)
-+ return -EINVAL;
-+ }
-+
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ tev.key[0] = val->value.i;
-+ tev.valid = val->value.i > 0;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ tem.val[0] = val->value.i;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry te;
-+
-+ te.table = XRX200_PCE_ACTVLAN_IDX;
-+ te.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&te);
-+ val->value.i = te.key[0];
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i, portmap, tagmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+
-+ portmap = 0;
-+ tagmap = 0;
-+ for (i = 0; i < val->len; i++)
-+ {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ portmap |= (1 << p->id);
-+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
-+ tagmap |= (1 << p->id);
-+ }
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+
-+ untagged = portmap ^ tagmap;
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tem.index = i;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
-+ return -EINVAL;
-+ }
-+
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ // auto-enable this vlan if not enabled already
-+ if (tem.val[0] == 0)
-+ {
-+ struct switch_val v;
-+ v.port_vlan = val->port_vlan;
-+ v.value.i = val->port_vlan;
-+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
-+ return -EINVAL;
-+
-+ //read updated tem
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ }
-+
-+ tem.val[1] = portmap;
-+ tem.val[2] = tagmap;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i;
-+ unsigned short ports, tags;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ ports = tem.val[1];
-+ tags = tem.val[2];
-+
-+ for (i = 0; i < XRX200_MAX_PORT; i++) {
-+ struct switch_port *p;
-+
-+ if (!(ports & (1 << i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (tags & (1 << i))
-+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
-+ else
-+ p->flags = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.key[0] == 0)
-+ return -EINVAL;
-+
-+ tev.valid = val->value.i;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ val->value.i = tev.valid;
-+
-+ return 0;
-+}
-+
-+// port
-+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ *val = tev.key[0];
-+ return 0;
-+}
-+
-+static int xrx200sw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
-+ if (!link->link)
-+ return 0;
-+
-+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
-+
-+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
-+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
-+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
-+
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+// attributes
-+static struct switch_attr xrx200sw_globals[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .set = xrx200_set_vlan_mode_enable,
-+ .get = xrx200_get_vlan_mode_enable,
-+ .name = "enable_vlan",
-+ .description = "Enable VLAN mode",
-+ .max = 1},
-+};
-+
-+static struct switch_attr xrx200sw_port[] = {
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
-+ .name = "uvr",
-+ .description = "Unknown VLAN Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
-+ .name = "vsr",
-+ .description = "VLAN Security Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
-+ .name = "vinr",
-+ .description = "VLAN Ingress Tag Rule",
-+ .max = 2,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
-+ .name = "tvm",
-+ .description = "Transparent VLAN Mode",
-+ .max = 1,
-+ },
-+};
-+
-+static struct switch_attr xrx200sw_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = xrx200sw_set_vlan_vid,
-+ .get = xrx200sw_get_vlan_vid,
-+ .max = 4094,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable",
-+ .description = "Enable VLAN",
-+ .set = xrx200sw_set_vlan_enable,
-+ .get = xrx200sw_get_vlan_enable,
-+ .max = 1,
-+ },
-+};
-+
-+static const struct switch_dev_ops xrx200sw_ops = {
-+ .attr_global = {
-+ .attr = xrx200sw_globals,
-+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
-+ },
-+ .attr_port = {
-+ .attr = xrx200sw_port,
-+ .n_attr = ARRAY_SIZE(xrx200sw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = xrx200sw_vlan,
-+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
-+ },
-+ .get_vlan_ports = xrx200sw_get_vlan_ports,
-+ .set_vlan_ports = xrx200sw_set_vlan_ports,
-+ .get_port_pvid = xrx200sw_get_port_pvid,
-+ .reset_switch = xrx200sw_reset_switch,
-+ .get_port_link = xrx200sw_get_port_link,
-+// .get_port_stats = xrx200sw_get_port_stats, //TODO
-+};
-+
-+static int xrx200sw_init(struct xrx200_hw *hw)
-+{
-+ int netdev_num;
-+
-+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
-+ {
-+ struct switch_dev *swdev;
-+ struct net_device *dev = hw->devs[netdev_num];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ if (!priv->sw)
-+ continue;
-+
-+ swdev = &hw->swdev;
-+
-+ swdev->name = "Lantiq XRX200 Switch";
-+ swdev->vlans = XRX200_MAX_VLAN;
-+ swdev->ports = XRX200_MAX_PORT;
-+ swdev->cpu_port = 6;
-+ swdev->ops = &xrx200sw_ops;
-+
-+ register_switch(swdev, dev);
-+ return 0; // enough switches
-+ }
-+ return 0;
-+}
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_bh(&priv->hw->lock);
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_enable(&priv->hw->chan[i].napi);
-+ ltq_dma_open(&priv->hw->chan[i].dma);
-+ }
-+ priv->hw->chan[i].refcount++;
-+ spin_unlock_bh(&priv->hw->lock);
-+ }
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_start(priv->port[i].phydev);
-+ netif_start_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ netif_stop_queue(dev);
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_stop(priv->port[i].phydev);
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_bh(&priv->hw->lock);
-+ priv->hw->chan[i].refcount--;
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_disable(&priv->hw->chan[i].napi);
-+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+ }
-+ spin_unlock_bh(&priv->hw->lock);
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+ if (!ch->skb[ch->dma.desc])
-+ goto skip;
-+
-+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+skip:
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ XRX200_DMA_DATA_LEN;
-+
-+ return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+ struct net_device *dev = ch->devs[id];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
-+ int ret;
-+
-+ ret = xrx200_alloc_skb(ch);
-+
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+
-+ if (ret) {
-+ netdev_err(dev,
-+ "failed to allocate new rx buffer\n");
-+ return 0;
-+ }
-+
-+ skb_put(skb, len);
-+#ifdef SW_ROUTING
-+ skb_pull(skb, 8);
-+#endif
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_receive_skb(skb);
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct xrx200_chan *ch = container_of(napi,
-+ struct xrx200_chan, napi);
-+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+ int rx = 0;
-+ int complete = 0;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ u32 *special_tag = (u32*)skb->data;
-+ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
-+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+ xrx200_hw_receive(ch, 0);
-+#endif
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ ltq_dma_enable_irq(&ch->dma);
-+ }
-+
-+ return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+ struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
-+ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
-+ int pkts = 0;
-+ int i;
-+
-+ spin_lock_bh(&hw->lock);
-+ ltq_dma_ack_irq(&ch->dma);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ struct sk_buff *skb = ch->skb[ch->tx_free];
-+
-+ pkts++;
-+ ch->skb[ch->tx_free] = NULL;
-+ dev_kfree_skb(skb);
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ ltq_dma_enable_irq(&ch->dma);
-+ spin_unlock_bh(&hw->lock);
-+
-+ if (!pkts)
-+ return;
-+
-+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
-+ netif_wake_queue(ch->devs[i]);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+ priv->stats.tx_errors++;
-+ netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ u32 byte_offset;
-+ int len;
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
-+ #else
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+ #endif
-+#endif
-+
-+ skb->dev = dev;
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_stop_queue(dev);
-+ return NETDEV_TX_BUSY;
-+ }
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ special_tag |= priv->port_map << PORT_MAP_SHIFT;
-+ #else
-+ if(priv->id)
-+ special_tag |= (1 << DPID_SHIFT);
-+ #endif
-+ if(skb_headroom(skb) < 4) {
-+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+ dev_kfree_skb_any(skb);
-+ skb = tmp;
-+ }
-+ skb_push(skb, 4);
-+ memcpy(skb->data, &special_tag, sizeof(u32));
-+ len += 4;
-+#endif
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ dev->trans_start = jiffies;
-+
-+ spin_lock_bh(&priv->hw->lock);
-+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ if (ch->dma.desc == ch->tx_free)
-+ netif_stop_queue(dev);
-+
-+ spin_unlock_bh(&priv->hw->lock);
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes+=len;
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+ struct xrx200_hw *hw = priv;
-+ int chnr = irq - XRX200_DMA_IRQ;
-+ struct xrx200_chan *ch = &hw->chan[chnr];
-+
-+ ltq_dma_disable_irq(&ch->dma);
-+ ltq_dma_ack_irq(&ch->dma);
-+
-+ if (chnr % 2)
-+ tasklet_schedule(&ch->tasklet);
-+ else
-+ napi_schedule(&ch->napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct xrx200_hw *hw)
-+{
-+ int i, err = 0;
-+
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ for (i = 0; i < 8 && !err; i++) {
-+ int irq = XRX200_DMA_IRQ + i;
-+ struct xrx200_chan *ch = &hw->chan[i];
-+
-+ ch->idx = ch->dma.nr = i;
-+
-+ if (i == XRX200_DMA_TX) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+ } else if (i == XRX200_DMA_RX) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (xrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+ } else
-+ continue;
-+
-+ if (!err)
-+ ch->dma.irq = irq;
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
-+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+ u16 miirate = 0;
-+
-+ switch (port->phydev->speed) {
-+ case SPEED_1000:
-+ phyaddr |= MDIO_PHY_SPEED_G1;
-+ miirate = MII_CFG_RATE_M125;
-+ break;
-+
-+ case SPEED_100:
-+ phyaddr |= MDIO_PHY_SPEED_M100;
-+ switch (miimode) {
-+ case MII_CFG_MODE_RMIIM:
-+ case MII_CFG_MODE_RMIIP:
-+ miirate = MII_CFG_RATE_M50;
-+ break;
-+ default:
-+ miirate = MII_CFG_RATE_M25;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ phyaddr |= MDIO_PHY_SPEED_M10;
-+ miirate = MII_CFG_RATE_M2P5;
-+ break;
-+ }
-+
-+ if (port->phydev->link)
-+ phyaddr |= MDIO_PHY_LINK_UP;
-+ else
-+ phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+ if (port->phydev->duplex == DUPLEX_FULL)
-+ phyaddr |= MDIO_PHY_FDUP_EN;
-+ else
-+ phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+ udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].link != priv->port[i].phydev->link) {
-+ xrx200_gmac_update(&priv->port[i]);
-+ priv->port[i].link = priv->port[i].phydev->link;
-+ netdev_info(dev, "port %d %s link\n",
-+ priv->port[i].num,
-+ (priv->port[i].link)?("got"):("lost"));
-+ }
-+ }
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+ if ((ctrl & MDIO_BUSY) == 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return 1;
-+
-+ ltq_mdio_w32(val, MDIO_WRITE);
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ unsigned val;
-+
-+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
-+ port->phy_if);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+ phydev->advertising = phydev->supported;
-+ port->phydev = phydev;
-+
-+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name,
-+ dev_name(&phydev->dev), phydev->irq);
-+
-+#ifdef SW_POLLING
-+ phy_read_status(phydev);
-+
-+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+#endif
-+ return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+ const struct xrx200_port *port)
-+{
-+ u16 miimode = 0;
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_MIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_RMIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+ MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err, i;
-+
-+#ifndef SW_POLLING
-+ unsigned int reg = 0;
-+
-+ /* enable auto polling */
-+ for (i = 0; i < priv->num_port; i++)
-+ reg |= BIT(priv->port[i].num);
-+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+ /* setup each port */
-+ for (i = 0; i < priv->num_port; i++)
-+ xrx200_port_config(priv, &priv->port[i]);
-+
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("net-xrx200: invalid MAC, using random\n");
-+ eth_random_addr(mac.sa_data);
-+ dev->addr_assign_type |= NET_ADDR_RANDOM;
-+ }
-+
-+ err = eth_mac_addr(dev, &mac);
-+ if (err)
-+ goto err_netdev;
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (xrx200_mdio_probe(dev, &priv->port[i]))
-+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+ priv->port[i].num);
-+
-+ return 0;
-+
-+err_netdev:
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+ int i;
-+
-+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+ ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+ ltq_switch_w32(i, PCE_TBL_ADDR);
-+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+ // start the table access:
-+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+ }
-+
-+ /* tell the switch that the microcode is loaded */
-+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* enable clock gate */
-+ clk_enable(hw->clk);
-+
-+ ltq_switch_w32(1, 0);
-+ mdelay(100);
-+ ltq_switch_w32(0, 0);
-+ /*
-+ * TODO: we should really disbale all phys/miis here and explicitly
-+ * enable them in the device secific init function
-+ */
-+
-+ /* disable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32(0, FDMA_PCTRLx(i));
-+ ltq_switch_w32(0, SDMA_PCTRLx(i));
-+ }
-+
-+ /* enable Switch */
-+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+ /* load the pce microcode */
-+ xrx200_pci_microcode();
-+
-+ /* Default unknown Broadcat/Multicast/Unicast port maps */
-+ ltq_switch_w32(0x7f, PCE_PMAP1);
-+ ltq_switch_w32(0x7f, PCE_PMAP2);
-+ ltq_switch_w32(0x7f, PCE_PMAP3);
-+
-+ /* RMON Counter Enable for all physical ports */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+ /* disable auto polling */
-+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+ /* enable port statistic counters */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+ /* set IPG to 12 */
-+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+ /* enable status header, enable CRC */
-+ ltq_pmac_w32_mask(0,
-+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#else
-+ /* disable status header, enable CRC */
-+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#endif
-+
-+ /* enable port fetch/store dma & VLAN Modification */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+ }
-+
-+ /* enable special tag insertion on cpu port */
-+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* disable the switch */
-+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+ /* free the channels and IRQs */
-+ for (i = 0; i < 2; i++) {
-+ ltq_dma_free(&hw->chan[i].dma);
-+ if (hw->chan[i].dma.irq)
-+ free_irq(hw->chan[i].dma.irq, hw);
-+ }
-+
-+ /* free the allocated RX ring */
-+ for (i = 0; i < LTQ_DESC_NUM; i++)
-+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+ /* clear the mdio bus */
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+
-+ /* release the clock */
-+ clk_disable(hw->clk);
-+ clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+ hw->mii_bus = mdiobus_alloc();
-+ if (!hw->mii_bus)
-+ return -ENOMEM;
-+
-+ hw->mii_bus->read = xrx200_mdio_rd;
-+ hw->mii_bus->write = xrx200_mdio_wr;
-+ hw->mii_bus->name = "lantiq,xrx200-mdio";
-+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+ if (of_mdiobus_register(hw->mii_bus, np)) {
-+ mdiobus_free(hw->mii_bus);
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+ struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+ if (!id)
-+ return;
-+
-+ memset(p, 0, sizeof(struct xrx200_port));
-+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+ addr = of_get_property(p->phy_node, "reg", NULL);
-+ if (!addr)
-+ return;
-+
-+ p->num = *id;
-+ p->phy_addr = *addr;
-+ p->phy_if = of_get_phy_mode(port);
-+ if (p->phy_addr > 0x10)
-+ p->flags = XRX200_PORT_TYPE_MAC;
-+ else
-+ p->flags = XRX200_PORT_TYPE_PHY;
-+ priv->num_port++;
-+
-+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+ if (gpio_is_valid(p->gpio))
-+ if (!gpio_request(p->gpio, "phy-reset")) {
-+ gpio_direction_output(p->gpio,
-+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+ udelay(100);
-+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+ /* is this port a wan port ? */
-+ if (priv->wan)
-+ priv->hw->wan_map |= BIT(p->num);
-+
-+ priv->port_map |= BIT(p->num);
-+
-+ /* store the port id in the hw struct so we can map ports -> devices */
-+ priv->hw->port_map[p->num] = priv->hw->num_devs;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+ .ndo_init = xrx200_init,
-+ .ndo_open = xrx200_open,
-+ .ndo_stop = xrx200_close,
-+ .ndo_start_xmit = xrx200_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_get_stats = xrx200_get_stats,
-+ .ndo_tx_timeout = xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
-+{
-+ struct xrx200_priv *priv;
-+ struct device_node *port;
-+ const __be32 *wan;
-+
-+ /* alloc the network device */
-+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+ if (!hw->devs[hw->num_devs])
-+ return;
-+
-+ /* setup the network device */
-+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+
-+ /* setup our private data */
-+ priv = netdev_priv(hw->devs[hw->num_devs]);
-+ priv->hw = hw;
-+ of_get_mac_address_mtd(iface, priv->mac);
-+ priv->id = hw->num_devs;
-+
-+ /* is this the wan interface ? */
-+ wan = of_get_property(iface, "lantiq,wan", NULL);
-+ if (wan && (*wan == 1))
-+ priv->wan = 1;
-+
-+ /* should the switch be enabled on this interface ? */
-+ if (of_find_property(iface, "lantiq,switch", NULL))
-+ priv->sw = 1;
-+
-+ /* load the ports that are part of the interface */
-+ for_each_child_of_node(iface, port)
-+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+ xrx200_of_port(priv, port);
-+
-+ /* register the actual device */
-+ if (!register_netdev(hw->devs[hw->num_devs]))
-+ hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np;
-+ int i;
-+
-+ /* load the memory ranges */
-+ for (i = 0; i < 4; i++) {
-+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res[i]) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENOENT;
-+ }
-+ }
-+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
-+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
-+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
-+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
-+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+ !xrx200_mii_membase || !xrx200_pmac_membase) {
-+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+ return -ENOMEM;
-+ }
-+
-+ /* get the clock */
-+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(xrx200_hw.clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(xrx200_hw.clk);
-+ }
-+
-+ /* bring up the dma engine and IP core */
-+ spin_lock_init(&xrx200_hw.lock);
-+ xrx200_dma_init(&xrx200_hw);
-+ xrx200_hw_init(&xrx200_hw);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
-+
-+ /* bring up the mdio bus */
-+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+ "lantiq,xrx200-mdio");
-+ if (mdio_np)
-+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+ dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+ /* load the interfaces */
-+ for_each_child_of_node(pdev->dev.of_node, iface_np)
-+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+ xrx200_of_iface(&xrx200_hw, iface_np);
-+ else
-+ dev_err(&pdev->dev,
-+ "only %d interfaces allowed\n",
-+ XRX200_MAX_DEV);
-+ }
-+
-+ if (!xrx200_hw.num_devs) {
-+ xrx200_hw_cleanup(&xrx200_hw);
-+ dev_err(&pdev->dev, "failed to load interfaces\n");
-+ return -ENOENT;
-+ }
-+
-+ xrx200sw_init(&xrx200_hw);
-+
-+ /* set wan port mask */
-+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+ for (i = 0; i < xrx200_hw.num_devs; i++) {
-+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+ }
-+
-+ /* setup NAPI */
-+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+ platform_set_drvdata(pdev, &xrx200_hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct xrx200_priv *priv;
-+
-+ if (!dev)
-+ return 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* free stack related instances */
-+ netif_stop_queue(dev);
-+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+ /* shut down hardware */
-+ xrx200_hw_cleanup(&xrx200_hw);
-+
-+ /* remove the actual device */
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+ { .compatible = "lantiq,xrx200-net" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+ .probe = xrx200_probe,
-+ .remove = xrx200_remove,
-+ .driver = {
-+ .name = "lantiq,xrx200-net",
-+ .of_match_table = xrx200_match,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
-@@ -0,0 +1,1328 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
-+ *
-+ * VR9 switch registers extracted from 310TUJ0 switch api
-+ * WARNING mult values of 0x00 may not be correct
-+ *
-+ */
-+
-+enum {
-+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
-+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
-+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
-+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
-+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
-+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
-+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
-+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
-+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
-+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
-+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
-+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
-+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
-+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
-+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
-+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
-+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
-+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
-+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
-+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
-+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
-+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
-+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
-+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
-+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
-+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
-+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
-+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
-+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
-+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
-+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
-+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
-+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
-+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
-+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
-+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
-+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
-+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
-+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
-+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
-+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
-+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
-+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
-+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
-+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
-+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
-+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
-+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
-+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
-+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
-+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
-+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
-+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
-+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
-+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
-+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
-+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
-+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
-+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
-+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
-+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
-+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
-+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
-+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
-+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
-+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
-+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
-+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
-+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
-+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
-+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
-+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
-+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
-+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
-+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
-+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
-+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
-+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
-+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
-+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
-+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
-+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
-+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
-+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
-+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
-+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
-+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
-+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
-+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
-+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
-+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
-+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
-+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
-+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
-+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
-+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
-+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
-+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
-+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
-+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
-+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
-+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
-+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
-+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
-+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
-+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
-+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
-+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
-+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
-+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
-+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
-+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
-+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
-+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
-+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
-+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
-+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
-+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
-+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
-+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
-+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
-+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
-+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
-+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
-+// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
-+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
-+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
-+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
-+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
-+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
-+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
-+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
-+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
-+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
-+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
-+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
-+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
-+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
-+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
-+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
-+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
-+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
-+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
-+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
-+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
-+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
-+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
-+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
-+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
-+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
-+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
-+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
-+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
-+// XRX200_BM_CISEL_PORT, /* Port Number */
-+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
-+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
-+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
-+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
-+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
-+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
-+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
-+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
-+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
-+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
-+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
-+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
-+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
-+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
-+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
-+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
-+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
-+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
-+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
-+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
-+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
-+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
-+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
-+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
-+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
-+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
-+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
-+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
-+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
-+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
-+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
-+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
-+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
-+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
-+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
-+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
-+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
-+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
-+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
-+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
-+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
-+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
-+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
-+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
-+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
-+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
-+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
-+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
-+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
-+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
-+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
-+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
-+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
-+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
-+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
-+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
-+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
-+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
-+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
-+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
-+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
-+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
-+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
-+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
-+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
-+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
-+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
-+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
-+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
-+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
-+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
-+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
-+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
-+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
-+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
-+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
-+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
-+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
-+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
-+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
-+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
-+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
-+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
-+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
-+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
-+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
-+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
-+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
-+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
-+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
-+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
-+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
-+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
-+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
-+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
-+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
-+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
-+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
-+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
-+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
-+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
-+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
-+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
-+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
-+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
-+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
-+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
-+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
-+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
-+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
-+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
-+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
-+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
-+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
-+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
-+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
-+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
-+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
-+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
-+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
-+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
-+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
-+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
-+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
-+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
-+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
-+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
-+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
-+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
-+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
-+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
-+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
-+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
-+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
-+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
-+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
-+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
-+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
-+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
-+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
-+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
-+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
-+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
-+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
-+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
-+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
-+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
-+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
-+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
-+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
-+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
-+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
-+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
-+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
-+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
-+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
-+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
-+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
-+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
-+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
-+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
-+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
-+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
-+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
-+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
-+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
-+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
-+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
-+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
-+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
-+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
-+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
-+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
-+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
-+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
-+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
-+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
-+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
-+// XRX200_MAC_TEST, /* MAC Test Register */
-+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
-+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
-+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
-+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
-+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
-+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
-+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
-+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
-+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
-+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
-+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
-+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
-+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
-+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
-+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
-+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
-+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
-+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
-+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
-+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
-+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
-+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
-+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
-+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
-+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
-+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
-+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
-+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
-+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
-+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
-+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
-+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
-+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
-+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
-+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
-+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
-+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
-+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
-+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
-+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
-+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
-+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
-+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
-+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
-+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
-+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
-+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
-+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
-+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
-+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
-+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
-+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
-+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
-+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
-+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
-+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
-+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
-+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
-+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
-+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
-+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
-+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
-+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
-+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
-+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
-+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
-+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
-+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
-+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
-+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
-+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
-+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
-+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
-+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
-+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
-+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
-+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
-+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
-+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
-+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
-+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
-+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
-+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
-+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
-+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
-+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
-+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
-+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
-+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
-+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
-+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
-+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
-+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
-+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
-+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
-+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
-+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
-+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
-+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
-+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
-+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
-+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
-+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
-+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
-+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
-+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
-+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
-+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
-+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
-+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
-+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
-+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
-+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
-+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
-+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
-+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
-+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
-+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
-+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
-+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
-+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
-+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
-+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
-+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
-+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
-+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
-+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
-+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
-+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
-+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
-+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
-+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
-+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
-+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
-+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
-+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
-+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
-+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
-+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
-+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
-+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
-+// XRX200_SDMA_IER_FERR, /* Frame Error */
-+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
-+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
-+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
-+// XRX200_SDMA_ISR_FERR, /* Frame Error */
-+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
-+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
-+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
-+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
-+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
-+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
-+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
-+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
-+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
-+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
-+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
-+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
-+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
-+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
-+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
-+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
-+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
-+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
-+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
-+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
-+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
-+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
-+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+};
-+
-+
-+struct xrx200sw_reg {
-+ int offset;
-+ int shift;
-+ int size;
-+ int mult;
-+} xrx200sw_reg[] = {
-+// offeset shift size mult
-+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
-+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
-+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
-+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
-+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
-+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
-+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
-+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
-+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
-+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
-+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
-+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
-+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
-+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
-+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
-+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
-+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
-+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
-+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
-+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
-+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
-+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
-+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
-+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
-+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
-+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
-+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
-+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
-+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
-+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
-+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
-+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
-+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
-+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
-+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
-+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
-+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
-+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
-+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
-+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
-+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
-+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
-+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
-+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
-+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
-+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
-+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
-+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
-+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
-+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
-+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
-+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
-+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
-+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
-+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
-+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
-+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
-+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
-+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
-+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
-+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
-+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
-+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
-+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
-+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
-+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
-+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
-+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
-+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
-+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
-+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
-+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
-+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
-+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
-+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
-+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
-+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
-+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
-+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
-+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
-+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
-+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
-+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
-+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
-+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
-+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
-+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
-+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
-+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
-+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
-+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
-+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
-+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
-+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
-+// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
-+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
-+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
-+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
-+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
-+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
-+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
-+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
-+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
-+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
-+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
-+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
-+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
-+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
-+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
-+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
-+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
-+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
-+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
-+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
-+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
-+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
-+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
-+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
-+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
-+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
-+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
-+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
-+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
-+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
-+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
-+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
-+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
-+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
-+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
-+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
-+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
-+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
-+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
-+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
-+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
-+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
-+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
-+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
-+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
-+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
-+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
-+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
-+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
-+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
-+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
-+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
-+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
-+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
-+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
-+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
-+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
-+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
-+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
-+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
-+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
-+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
-+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
-+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
-+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
-+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
-+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
-+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
-+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
-+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
-+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
-+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
-+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
-+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
-+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
-+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
-+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
-+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
-+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
-+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
-+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
-+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
-+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
-+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
-+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
-+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
-+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
-+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
-+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
-+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
-+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
-+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
-+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
-+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
-+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
-+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
-+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
-+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
-+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
-+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
-+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
-+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
-+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
-+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
-+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
-+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
-+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
-+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
-+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
-+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
-+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
-+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
-+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
-+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
-+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
-+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
-+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
-+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
-+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
-+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
-+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
-+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
-+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
-+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
-+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
-+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
-+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
-+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
-+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
-+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
-+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
-+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
-+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
-+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
-+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
-+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
-+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
-+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
-+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
-+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
-+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
-+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
-+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
-+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
-+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
-+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
-+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
-+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
-+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
-+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
-+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
-+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
-+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
-+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
-+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
-+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
-+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
-+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
-+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
-+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
-+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
-+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
-+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
-+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
-+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
-+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
-+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
-+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
-+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
-+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
-+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
-+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
-+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
-+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
-+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
-+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
-+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
-+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
-+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
-+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
-+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
-+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
-+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
-+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
-+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
-+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
-+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
-+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
-+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
-+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
-+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
-+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
-+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
-+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
-+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
-+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
-+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
-+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
-+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
-+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
-+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
-+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
-+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
-+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
-+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
-+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
-+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
-+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
-+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
-+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
-+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
-+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
-+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
-+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
-+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
-+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
-+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
-+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
-+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
-+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
-+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
-+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
-+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
-+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
-+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
-+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
-+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
-+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
-+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
-+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
-+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
-+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
-+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
-+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
-+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
-+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
-+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
-+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
-+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
-+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
-+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
-+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
-+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
-+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
-+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
-+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
-+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
-+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
-+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
-+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
-+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
-+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
-+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
-+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
-+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
-+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
-+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
-+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
-+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
-+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
-+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
-+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
-+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
-+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
-+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
-+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
-+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
-+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
-+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
-+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
-+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
-+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
-+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
-+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
-+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
-+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
-+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
-+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
-+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
-+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
-+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
-+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
-+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
-+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
-+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
-+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
-+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
-+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
-+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
-+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
-+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
-+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
-+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
-+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
-+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
-+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
-+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
-+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
-+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
-+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
-+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
-+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
-+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
-+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
-+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
-+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
-+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
-+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
-+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
-+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
-+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
-+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
-+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
-+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
-+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
-+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
-+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
-+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
-+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
-+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
-+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
-+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
-+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
-+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
-+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
-+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
-+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
-+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
-+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
-+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
-+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
-+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
-+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
-+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
-+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
-+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
-+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
-+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
-+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
-+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
-+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
-+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
-+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
-+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
-+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
-+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
-+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
-+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
-+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
-+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
-+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
-+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
-+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
-+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
-+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
-+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
-+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
-+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
-+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
-+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
-+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
-+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
-+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
-+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
-+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
-+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
-+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
-+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
-+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
-+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
-+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
-+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
-+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
-+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
-+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
-+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
-+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
-+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
-+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
-+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
-+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
-+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
-+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
-+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
-+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
-+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
-+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
-+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
-+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
-+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
-+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
-+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
-+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
-+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
-+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
-+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
-+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
-+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
-+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
-+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
-+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
-+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
-+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
-+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
-+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
-+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
-+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
-+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
-+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
-+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
-+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
-+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
-+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
-+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
-+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
-+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
-+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
-+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
-+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
-+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
-+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
-+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
-+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
-+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
-+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
-+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
-+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
-+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
-+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
-+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
-+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
-+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
-+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
-+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
-+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
-+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
-+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+};
-+
-+
diff --git a/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch
deleted file mode 100644
index 2967bae2a9..0000000000
--- a/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 26/36] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -855,7 +855,8 @@ void phy_state_machine(struct work_struc
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- break;
- }
-@@ -928,7 +929,8 @@ void phy_state_machine(struct work_struc
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-@@ -940,7 +942,8 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- do_suspend = true;
- }
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -367,6 +367,7 @@ struct phy_device {
- bool is_internal;
- bool has_fixups;
- bool suspended;
-+ bool no_auto_carrier_off;
-
- enum phy_state state;
-
diff --git a/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch
deleted file mode 100644
index 3301264a17..0000000000
--- a/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch
+++ /dev/null
@@ -1,907 +0,0 @@
-From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 22:45:34 +0200
-Subject: [PATCH 28/36] NET: lantiq: various etop fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++-----------
- 1 file changed, 389 insertions(+), 166 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -11,7 +11,7 @@
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
-- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
- */
-
- #include <linux/kernel.h>
-@@ -30,11 +30,16 @@
- #include <linux/mm.h>
- #include <linux/platform_device.h>
- #include <linux/ethtool.h>
-+#include <linux/if_vlan.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
-
- #include <asm/checksum.h>
-
-@@ -42,7 +47,7 @@
- #include <xway_dma.h>
- #include <lantiq_platform.h>
-
--#define LTQ_ETOP_MDIO 0x11804
-+#define LTQ_ETOP_MDIO_ACC 0x11804
- #define MDIO_REQUEST 0x80000000
- #define MDIO_READ 0x40000000
- #define MDIO_ADDR_MASK 0x1f
-@@ -51,44 +56,91 @@
- #define MDIO_REG_OFFSET 0x10
- #define MDIO_VAL_MASK 0xffff
-
--#define PPE32_CGEN 0x800
--#define LQ_PPE32_ENET_MAC_CFG 0x1840
-+#define LTQ_ETOP_MDIO_CFG 0x11800
-+#define MDIO_CFG_MASK 0x6
-+
-+#define LTQ_ETOP_CFG 0x11808
-+#define LTQ_ETOP_IGPLEN 0x11820
-+#define LTQ_ETOP_MAC_CFG 0x11840
-
- #define LTQ_ETOP_ENETS0 0x11850
- #define LTQ_ETOP_MAC_DA0 0x1186C
- #define LTQ_ETOP_MAC_DA1 0x11870
--#define LTQ_ETOP_CFG 0x16020
--#define LTQ_ETOP_IGPLEN 0x16080
-+
-+#define MAC_CFG_MASK 0xfff
-+#define MAC_CFG_CGEN (1 << 11)
-+#define MAC_CFG_DUPLEX (1 << 2)
-+#define MAC_CFG_SPEED (1 << 1)
-+#define MAC_CFG_LINK (1 << 0)
-
- #define MAX_DMA_CHAN 0x8
- #define MAX_DMA_CRC_LEN 0x4
- #define MAX_DMA_DATA_LEN 0x600
-
- #define ETOP_FTCU BIT(28)
--#define ETOP_MII_MASK 0xf
--#define ETOP_MII_NORMAL 0xd
--#define ETOP_MII_REVERSE 0xe
- #define ETOP_PLEN_UNDER 0x40
--#define ETOP_CGEN 0x800
-+#define ETOP_CFG_MII0 0x01
-
--/* use 2 static channels for TX/RX */
--#define LTQ_ETOP_TX_CHANNEL 1
--#define LTQ_ETOP_RX_CHANNEL 6
--#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
--#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
-+#define ETOP_CFG_MASK 0xfff
-+#define ETOP_CFG_FEN0 (1 << 8)
-+#define ETOP_CFG_SEN0 (1 << 6)
-+#define ETOP_CFG_OFF1 (1 << 3)
-+#define ETOP_CFG_REMII0 (1 << 1)
-+#define ETOP_CFG_OFF0 (1 << 0)
-+
-+#define LTQ_GBIT_MDIO_CTL 0xCC
-+#define LTQ_GBIT_MDIO_DATA 0xd0
-+#define LTQ_GBIT_GCTL0 0x68
-+#define LTQ_GBIT_PMAC_HD_CTL 0x8c
-+#define LTQ_GBIT_P0_CTL 0x4
-+#define LTQ_GBIT_PMAC_RX_IPG 0xa8
-+#define LTQ_GBIT_RGMII_CTL 0x78
-+
-+#define PMAC_HD_CTL_AS (1 << 19)
-+#define PMAC_HD_CTL_RXSH (1 << 22)
-+
-+/* Switch Enable (0=disable, 1=enable) */
-+#define GCTL0_SE 0x80000000
-+/* Disable MDIO auto polling (0=disable, 1=enable) */
-+#define PX_CTL_DMDIO 0x00400000
-+
-+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
-+#define MDC_CLOCK_MASK 0xff000000
-+#define MDC_CLOCK_OFFSET 24
-+
-+/* register information for the gbit's MDIO bus */
-+#define MDIO_XR9_REQUEST 0x00008000
-+#define MDIO_XR9_READ 0x00000800
-+#define MDIO_XR9_WRITE 0x00000400
-+#define MDIO_XR9_REG_MASK 0x1f
-+#define MDIO_XR9_ADDR_MASK 0x1f
-+#define MDIO_XR9_RD_MASK 0xffff
-+#define MDIO_XR9_REG_OFFSET 0
-+#define MDIO_XR9_ADDR_OFFSET 5
-+#define MDIO_XR9_WR_OFFSET 16
-
-+#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \
-+ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
-+
-+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
- #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
- #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
- #define ltq_etop_w32_mask(x, y, z) \
- ltq_w32_mask(x, y, ltq_etop_membase + (z))
-
--#define DRV_VERSION "1.0"
-+#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
-+#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
-+#define ltq_gbit_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
-+
-+#define DRV_VERSION "1.2"
-
- static void __iomem *ltq_etop_membase;
-+static void __iomem *ltq_gbit_membase;
-
- struct ltq_etop_chan {
-- int idx;
- int tx_free;
-+ int irq;
- struct net_device *netdev;
- struct napi_struct napi;
- struct ltq_dma_channel dma;
-@@ -98,22 +150,35 @@ struct ltq_etop_chan {
- struct ltq_etop_priv {
- struct net_device *netdev;
- struct platform_device *pdev;
-- struct ltq_eth_data *pldata;
- struct resource *res;
-
- struct mii_bus *mii_bus;
- struct phy_device *phydev;
-
-- struct ltq_etop_chan ch[MAX_DMA_CHAN];
-- int tx_free[MAX_DMA_CHAN >> 1];
-+ struct ltq_etop_chan txch;
-+ struct ltq_etop_chan rxch;
-+
-+ int tx_irq;
-+ int rx_irq;
-+
-+ unsigned char mac[6];
-+ int mii_mode;
-
- spinlock_t lock;
-+
-+ struct clk *clk_ppe;
-+ struct clk *clk_switch;
-+ struct clk *clk_ephy;
-+ struct clk *clk_ephycgu;
- };
-
-+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data);
-+
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
-- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
- if (!ch->skb[ch->dma.desc])
- return -ENOMEM;
- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
- spin_unlock_irqrestore(&priv->lock, flags);
-
- skb_put(skb, len);
-+ skb->dev = ch->netdev;
- skb->protocol = eth_type_trans(skb, ch->netdev);
- netif_receive_skb(skb);
-+ ch->netdev->stats.rx_packets++;
-+ ch->netdev->stats.rx_bytes += len;
- }
-
- static int
-@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- struct ltq_etop_chan *ch = container_of(napi,
- struct ltq_etop_chan, napi);
-+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- int rx = 0;
- int complete = 0;
-+ unsigned long flags;
-
- while ((rx < budget) && !complete) {
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- }
- if (complete || !rx) {
- napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
- }
- return rx;
- }
-@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
- container_of(napi, struct ltq_etop_chan, napi);
- struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- struct netdev_queue *txq =
-- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- while ((ch->dma.desc_base[ch->tx_free].ctl &
- (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ ch->netdev->stats.tx_packets++;
-+ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
- dev_kfree_skb_any(ch->skb[ch->tx_free]);
- ch->skb[ch->tx_free] = NULL;
- memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
- if (netif_tx_queue_stopped(txq))
- netif_tx_start_queue(txq);
- napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
- return 1;
- }
-
-@@ -210,9 +286,10 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- struct ltq_etop_priv *priv = _priv;
-- int ch = irq - LTQ_DMA_CH0_INT;
--
-- napi_schedule(&priv->ch[ch].napi);
-+ if (irq == priv->txch.dma.irq)
-+ napi_schedule(&priv->txch.napi);
-+ else
-+ napi_schedule(&priv->rxch.napi);
- return IRQ_HANDLED;
- }
-
-@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device
- ltq_dma_free(&ch->dma);
- if (ch->dma.irq)
- free_irq(ch->dma.irq, priv);
-- if (IS_RX(ch->idx)) {
-+ if (ch == &priv->txch) {
- int desc;
- for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -235,65 +312,133 @@ static void
- ltq_etop_hw_exit(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-
-- ltq_pmu_disable(PMU_PPE);
-- for (i = 0; i < MAX_DMA_CHAN; i++)
-- if (IS_TX(i) || IS_RX(i))
-- ltq_etop_free_channel(dev, &priv->ch[i]);
-+ clk_disable(priv->clk_ppe);
-+
-+ if (of_machine_is_compatible("lantiq,ar9"))
-+ clk_disable(priv->clk_switch);
-+
-+ if (of_machine_is_compatible("lantiq,ase")) {
-+ clk_disable(priv->clk_ephy);
-+ clk_disable(priv->clk_ephycgu);
-+ }
-+
-+ ltq_etop_free_channel(dev, &priv->txch);
-+ ltq_etop_free_channel(dev, &priv->rxch);
-+}
-+
-+static void
-+ltq_etop_gbit_init(struct net_device *dev)
-+{
-+ struct ltq_etop_priv *priv = netdev_priv(dev);
-+
-+ clk_enable(priv->clk_switch);
-+
-+ /* enable gbit port0 on the SoC */
-+ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
-+
-+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
-+ /* disable MDIO auto polling mode */
-+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-+ /* set 1522 packet size */
-+ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
-+ /* disable pmac & dmac headers */
-+ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
-+ LTQ_GBIT_PMAC_HD_CTL);
-+ /* Due to traffic halt when burst length 8,
-+ replace default IPG value with 0x3B */
-+ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
-+ /* set mdc clock to 2.5 MHz */
-+ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
-+ LTQ_GBIT_RGMII_CTL);
- }
-
- static int
- ltq_etop_hw_init(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-+ int mii_mode = priv->mii_mode;
-
-- ltq_pmu_enable(PMU_PPE);
-+ clk_enable(priv->clk_ppe);
-+
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ ltq_etop_gbit_init(dev);
-+ /* force the etops link to the gbit to MII */
-+ mii_mode = PHY_INTERFACE_MODE_MII;
-+ }
-+ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
-+ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
-+ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
-
-- switch (priv->pldata->mii_mode) {
-+ switch (mii_mode) {
- case PHY_INTERFACE_MODE_RMII:
-- ltq_etop_w32_mask(ETOP_MII_MASK,
-- ETOP_MII_REVERSE, LTQ_ETOP_CFG);
-+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
-+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- break;
-
- case PHY_INTERFACE_MODE_MII:
-- ltq_etop_w32_mask(ETOP_MII_MASK,
-- ETOP_MII_NORMAL, LTQ_ETOP_CFG);
-+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
-+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- break;
-
- default:
-+ if (of_machine_is_compatible("lantiq,ase")) {
-+ clk_enable(priv->clk_ephy);
-+ /* disable external MII */
-+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
-+ /* enable clock for internal PHY */
-+ clk_enable(priv->clk_ephycgu);
-+ /* we need to write this magic to the internal phy to
-+ make it work */
-+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-+ pr_info("Selected EPHY mode\n");
-+ break;
-+ }
- netdev_err(dev, "unknown mii mode %d\n",
-- priv->pldata->mii_mode);
-+ mii_mode);
- return -ENOTSUPP;
- }
-
-- /* enable crc generation */
-- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
-+ return 0;
-+}
-+
-+static int
-+ltq_etop_dma_init(struct net_device *dev)
-+{
-+ struct ltq_etop_priv *priv = netdev_priv(dev);
-+ int tx = priv->tx_irq - LTQ_DMA_ETOP;
-+ int rx = priv->rx_irq - LTQ_DMA_ETOP;
-+ int err;
-
- ltq_dma_init_port(DMA_PORT_ETOP);
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- int irq = LTQ_DMA_CH0_INT + i;
-- struct ltq_etop_chan *ch = &priv->ch[i];
--
-- ch->idx = ch->dma.nr = i;
--
-- if (IS_TX(i)) {
-- ltq_dma_alloc_tx(&ch->dma);
-- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
-- } else if (IS_RX(i)) {
-- ltq_dma_alloc_rx(&ch->dma);
-- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-- ch->dma.desc++)
-- if (ltq_etop_alloc_skb(ch))
-- return -ENOMEM;
-- ch->dma.desc = 0;
-- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
-+ priv->txch.dma.nr = tx;
-+ ltq_dma_alloc_tx(&priv->txch.dma);
-+ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
-+ if (err) {
-+ netdev_err(dev, "failed to allocate tx irq\n");
-+ goto err_out;
-+ }
-+ priv->txch.dma.irq = priv->tx_irq;
-+
-+ priv->rxch.dma.nr = rx;
-+ ltq_dma_alloc_rx(&priv->rxch.dma);
-+ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
-+ priv->rxch.dma.desc++) {
-+ if (ltq_etop_alloc_skb(&priv->rxch)) {
-+ netdev_err(dev, "failed to allocate skbs\n");
-+ err = -ENOMEM;
-+ goto err_out;
- }
-- ch->dma.irq = irq;
- }
-- return 0;
-+ priv->rxch.dma.desc = 0;
-+ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
-+ if (err)
-+ netdev_err(dev, "failed to allocate rx irq\n");
-+ else
-+ priv->rxch.dma.irq = priv->rx_irq;
-+err_out:
-+ return err;
- }
-
- static void
-@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_ethtool_gset(priv->phydev, cmd);
-+ if (priv->phydev)
-+ return phy_ethtool_gset(priv->phydev, cmd);
-+ else
-+ return 0;
- }
-
- static int
-@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_ethtool_sset(priv->phydev, cmd);
-+ if (priv->phydev)
-+ return phy_ethtool_sset(priv->phydev, cmd);
-+ else
-+ return 0;
- }
-
- static int
-@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *d
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_start_aneg(priv->phydev);
-+ if (priv->phydev)
-+ return phy_start_aneg(priv->phydev);
-+ else
-+ return 0;
- }
-
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop
- };
-
- static int
-+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data)
-+{
-+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
-+ (phy_data << MDIO_XR9_WR_OFFSET) |
-+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ return 0;
-+}
-+
-+static int
-+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
-+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
-+ return val;
-+}
-+
-+static int
- ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
- {
- u32 val = MDIO_REQUEST |
-@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
- ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
- phy_data;
-
-- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- ;
-- ltq_etop_w32(val, LTQ_ETOP_MDIO);
-+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
- return 0;
- }
-
-@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
- ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
- ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
-
-- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- ;
-- ltq_etop_w32(val, LTQ_ETOP_MDIO);
-- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
-+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- ;
-- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
-+ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
- return val;
- }
-
-@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *d
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = NULL;
-- int phy_addr;
-+ u32 phy_supported = (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-
-- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-- if (priv->mii_bus->phy_map[phy_addr]) {
-- phydev = priv->mii_bus->phy_map[phy_addr];
-- break;
-- }
-- }
-+ if (of_machine_is_compatible("lantiq,ase"))
-+ phydev = priv->mii_bus->phy_map[8];
-+ else
-+ phydev = priv->mii_bus->phy_map[0];
-
- if (!phydev) {
- netdev_err(dev, "no PHY found\n");
-@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *d
- }
-
- phydev = phy_connect(dev, dev_name(&phydev->dev),
-- &ltq_etop_mdio_link, priv->pldata->mii_mode);
-+ &ltq_etop_mdio_link, priv->mii_mode);
-
- if (IS_ERR(phydev)) {
- netdev_err(dev, "Could not attach to PHY\n");
- return PTR_ERR(phydev);
- }
-
-- phydev->supported &= (SUPPORTED_10baseT_Half
-- | SUPPORTED_10baseT_Full
-- | SUPPORTED_100baseT_Half
-- | SUPPORTED_100baseT_Full
-- | SUPPORTED_Autoneg
-- | SUPPORTED_MII
-- | SUPPORTED_TP);
-+ if (of_machine_is_compatible("lantiq,ar9"))
-+ phy_supported |= SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full;
-
-+ phydev->supported &= phy_supported;
- phydev->advertising = phydev->supported;
- priv->phydev = phydev;
- pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *de
- }
-
- priv->mii_bus->priv = dev;
-- priv->mii_bus->read = ltq_etop_mdio_rd;
-- priv->mii_bus->write = ltq_etop_mdio_wr;
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
-+ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
-+ } else {
-+ priv->mii_bus->read = ltq_etop_mdio_rd;
-+ priv->mii_bus->write = ltq_etop_mdio_wr;
-+ }
- priv->mii_bus->name = "ltq_mii";
- snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- priv->pdev->name, priv->pdev->id);
-@@ -480,17 +673,19 @@ static int
- ltq_etop_open(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-+ unsigned long flags;
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- struct ltq_etop_chan *ch = &priv->ch[i];
-+ napi_enable(&priv->txch.napi);
-+ napi_enable(&priv->rxch.napi);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_open(&priv->txch.dma);
-+ ltq_dma_open(&priv->rxch.dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ if (priv->phydev)
-+ phy_start(priv->phydev);
-
-- if (!IS_TX(i) && (!IS_RX(i)))
-- continue;
-- ltq_dma_open(&ch->dma);
-- napi_enable(&ch->napi);
-- }
-- phy_start(priv->phydev);
- netif_tx_start_all_queues(dev);
- return 0;
- }
-@@ -499,18 +694,19 @@ static int
- ltq_etop_stop(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-+ unsigned long flags;
-
- netif_tx_stop_all_queues(dev);
-- phy_stop(priv->phydev);
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- struct ltq_etop_chan *ch = &priv->ch[i];
--
-- if (!IS_RX(i) && !IS_TX(i))
-- continue;
-- napi_disable(&ch->napi);
-- ltq_dma_close(&ch->dma);
-- }
-+ if (priv->phydev)
-+ phy_stop(priv->phydev);
-+ napi_disable(&priv->txch.napi);
-+ napi_disable(&priv->rxch.napi);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_close(&priv->txch.dma);
-+ ltq_dma_close(&priv->rxch.dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
- return 0;
- }
-
-@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
- int queue = skb_get_queue_mapping(skb);
- struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
-- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-- int len;
-+ struct ltq_dma_desc *desc =
-+ &priv->txch.dma.desc_base[priv->txch.dma.desc];
- unsigned long flags;
- u32 byte_offset;
-+ int len;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-- dev_kfree_skb_any(skb);
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
-+ priv->txch.skb[priv->txch.dma.desc]) {
- netdev_err(dev, "tx ring full\n");
- netif_tx_stop_queue(txq);
- return NETDEV_TX_BUSY;
-@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
-
- /* dma needs to start on a 16 byte aligned address */
- byte_offset = CPHYSADDR(skb->data) % 16;
-- ch->skb[ch->dma.desc] = skb;
-+ priv->txch.skb[priv->txch.dma.desc] = skb;
-
- dev->trans_start = jiffies;
-
-@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
- wmb();
- desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-- ch->dma.desc++;
-- ch->dma.desc %= LTQ_DESC_NUM;
-+ priv->txch.dma.desc++;
-+ priv->txch.dma.desc %= LTQ_DESC_NUM;
- spin_unlock_irqrestore(&priv->lock, flags);
-
-- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
- netif_tx_stop_queue(txq);
-
- return NETDEV_TX_OK;
-@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *d
- struct ltq_etop_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
-+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
-+
- spin_lock_irqsave(&priv->lock, flags);
-- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
-+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
- LTQ_ETOP_IGPLEN);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-@@ -638,6 +836,9 @@ ltq_etop_init(struct net_device *dev)
- if (err)
- goto err_hw;
- ltq_etop_change_mtu(dev, 1500);
-+ err = ltq_etop_dma_init(dev);
-+ if (err)
-+ goto err_hw;
-
- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
- if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -655,9 +856,10 @@ ltq_etop_init(struct net_device *dev)
- dev->addr_assign_type = NET_ADDR_RANDOM;
-
- ltq_etop_set_multicast_list(dev);
-- err = ltq_etop_mdio_init(dev);
-- if (err)
-- goto err_netdev;
-+ if (!ltq_etop_mdio_init(dev))
-+ dev->ethtool_ops = &ltq_etop_ethtool_ops;
-+ else
-+ pr_warn("etop: mdio probe failed\n");;
- return 0;
-
- err_netdev:
-@@ -677,6 +879,9 @@ ltq_etop_tx_timeout(struct net_device *d
- err = ltq_etop_hw_init(dev);
- if (err)
- goto err_hw;
-+ err = ltq_etop_dma_init(dev);
-+ if (err)
-+ goto err_hw;
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
- return;
-@@ -700,14 +905,18 @@ static const struct net_device_ops ltq_e
- .ndo_tx_timeout = ltq_etop_tx_timeout,
- };
-
--static int __init
--ltq_etop_probe(struct platform_device *pdev)
-+static int ltq_etop_probe(struct platform_device *pdev)
- {
- struct net_device *dev;
- struct ltq_etop_priv *priv;
-- struct resource *res;
-+ struct resource *res, *gbit_res, irqres[2];
- int err;
-- int i;
-+
-+ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
-+ if (err != 2) {
-+ dev_err(&pdev->dev, "failed to get etop irqs\n");
-+ return -EINVAL;
-+ }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
-@@ -733,30 +942,58 @@ ltq_etop_probe(struct platform_device *p
- goto err_out;
- }
-
-- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
-- if (!dev) {
-- err = -ENOMEM;
-- goto err_out;
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!gbit_res) {
-+ dev_err(&pdev->dev, "failed to get gbit resource\n");
-+ err = -ENOENT;
-+ goto err_out;
-+ }
-+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
-+ gbit_res->start, resource_size(gbit_res));
-+ if (!ltq_gbit_membase) {
-+ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
-+ pdev->id);
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
- }
-+
-+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- strcpy(dev->name, "eth%d");
- dev->netdev_ops = &ltq_eth_netdev_ops;
-- dev->ethtool_ops = &ltq_etop_ethtool_ops;
- priv = netdev_priv(dev);
- priv->res = res;
- priv->pdev = pdev;
-- priv->pldata = dev_get_platdata(&pdev->dev);
- priv->netdev = dev;
-+ priv->tx_irq = irqres[0].start;
-+ priv->rx_irq = irqres[1].start;
-+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
-+ of_get_mac_address_mtd(pdev->dev.of_node, priv->mac);
-+
-+ priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->clk_ppe))
-+ return PTR_ERR(priv->clk_ppe);
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ priv->clk_switch = clk_get(&pdev->dev, "switch");
-+ if (IS_ERR(priv->clk_switch))
-+ return PTR_ERR(priv->clk_switch);
-+ }
-+ if (of_machine_is_compatible("lantiq,ase")) {
-+ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
-+ if (IS_ERR(priv->clk_ephy))
-+ return PTR_ERR(priv->clk_ephy);
-+ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
-+ if (IS_ERR(priv->clk_ephycgu))
-+ return PTR_ERR(priv->clk_ephycgu);
-+ }
-+
- spin_lock_init(&priv->lock);
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- if (IS_TX(i))
-- netif_napi_add(dev, &priv->ch[i].napi,
-- ltq_etop_poll_tx, 8);
-- else if (IS_RX(i))
-- netif_napi_add(dev, &priv->ch[i].napi,
-- ltq_etop_poll_rx, 32);
-- priv->ch[i].netdev = dev;
-- }
-+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
-+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
-+ priv->txch.netdev = dev;
-+ priv->rxch.netdev = dev;
-
- err = register_netdev(dev);
- if (err)
-@@ -785,31 +1022,22 @@ ltq_etop_remove(struct platform_device *
- return 0;
- }
-
-+static const struct of_device_id ltq_etop_match[] = {
-+ { .compatible = "lantiq,etop-xway" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_etop_match);
-+
- static struct platform_driver ltq_mii_driver = {
-+ .probe = ltq_etop_probe,
- .remove = ltq_etop_remove,
- .driver = {
- .name = "ltq_etop",
-+ .of_match_table = ltq_etop_match,
- },
- };
-
--int __init
--init_ltq_etop(void)
--{
-- int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
--
-- if (ret)
-- pr_err("ltq_etop: Error registering platform driver!");
-- return ret;
--}
--
--static void __exit
--exit_ltq_etop(void)
--{
-- platform_driver_unregister(&ltq_mii_driver);
--}
--
--module_init(init_ltq_etop);
--module_exit(exit_ltq_etop);
-+module_platform_driver(ltq_mii_driver);
-
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
- MODULE_DESCRIPTION("Lantiq SoC ETOP");
diff --git a/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 6badfe30fa..0000000000
--- a/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 11 +++++--
- include/asm-generic/gpio.h | 5 +++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -444,3 +446,69 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -461,6 +461,7 @@ static inline struct gpio_desc *devm_get
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -469,6 +470,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -549,7 +549,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- unsigned long flags;
-@@ -601,6 +601,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (desc->chip->names && desc->chip->names[offset])
- ioname = desc->chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, desc->chip->dev,
- MKDEV(0, 0), desc, gpio_groups,
-@@ -620,6 +622,12 @@ fail_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *data)
diff --git a/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
deleted file mode 100644
index 0fe9f04975..0000000000
--- a/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ /dev/null
@@ -1,1034 +0,0 @@
-From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:26:42 +0200
-Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig | 10 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++
- drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++
- 4 files changed, 992 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-lantiq.c
- create mode 100644 drivers/i2c/busses/i2c-lantiq.h
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -609,6 +609,16 @@ config I2C_MESON
- If you say yes to this option, support will be included for the
- I2C interface on the Amlogic Meson family of SoCs.
-
-+config I2C_LANTIQ
-+ tristate "Lantiq I2C interface"
-+ depends on LANTIQ && SOC_FALCON
-+ help
-+ If you say yes to this option, support will be included for the
-+ Lantiq I2C core.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-lantiq.
-+
- config I2C_MPC
- tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- depends on PPC
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
- obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
- obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
- obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
-+obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o
- obj-$(CONFIG_I2C_MESON) += i2c-meson.o
- obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
- obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.c
-@@ -0,0 +1,747 @@
-+
-+/*
-+ * Lantiq I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h> /* for kzalloc, kfree */
-+#include <linux/i2c.h>
-+#include <linux/errno.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_i2c.h>
-+
-+#include <lantiq_soc.h>
-+#include "i2c-lantiq.h"
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+/* access macros */
-+#define i2c_r32(reg) \
-+ __raw_readl(&(priv->membase)->reg)
-+#define i2c_w32(val, reg) \
-+ __raw_writel(val, &(priv->membase)->reg)
-+#define i2c_w32_mask(clear, set, reg) \
-+ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
-+
-+#define DRV_NAME "i2c-lantiq"
-+#define DRV_VERSION "1.00"
-+
-+#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */
-+
-+#ifdef DEBUG
-+#define LTQ_I2C_XFER_TIMEOUT (25*HZ)
-+#else
-+#define LTQ_I2C_XFER_TIMEOUT HZ
-+#endif
-+
-+#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
-+ I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define LTQ_I2C_ARB_LOST (1 << 0)
-+#define LTQ_I2C_NACK (1 << 1)
-+#define LTQ_I2C_RX_UFL (1 << 2)
-+#define LTQ_I2C_RX_OFL (1 << 3)
-+#define LTQ_I2C_TX_UFL (1 << 4)
-+#define LTQ_I2C_TX_OFL (1 << 5)
-+
-+struct ltq_i2c {
-+ struct mutex mutex;
-+
-+
-+ /* active clock settings */
-+ unsigned int input_clock; /* clock input for i2c hardware block */
-+ unsigned int i2c_clock; /* approximated bus clock in kHz */
-+
-+ struct clk *clk_gate;
-+ struct clk *clk_input;
-+
-+
-+ /* resources (memory and interrupts) */
-+ int irq_lb; /* last burst irq */
-+
-+ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */
-+
-+ struct i2c_adapter adap;
-+ struct device *dev;
-+
-+ struct completion cmd_complete;
-+
-+
-+ /* message transfer data */
-+ struct i2c_msg *current_msg; /* current message */
-+ int msgs_num; /* number of messages to handle */
-+ u8 *msg_buf; /* current buffer */
-+ u32 msg_buf_len; /* remaining length of current buffer */
-+ int msg_err; /* error status of the current transfer */
-+
-+
-+ /* master status codes */
-+ enum {
-+ STATUS_IDLE,
-+ STATUS_ADDR, /* address phase */
-+ STATUS_WRITE,
-+ STATUS_READ,
-+ STATUS_READ_END,
-+ STATUS_STOP
-+ } status;
-+};
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct ltq_i2c *priv)
-+{
-+ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct ltq_i2c *priv)
-+{
-+ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct ltq_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */
-+ u16 addr = msg->addr;
-+
-+ /* new i2c_msg */
-+ priv->msg_buf = msg->buf;
-+ priv->msg_buf_len = msg->len;
-+ if (rd)
-+ priv->status = STATUS_READ;
-+ else
-+ priv->status = STATUS_WRITE;
-+
-+ /* send slave address */
-+ if (msg->flags & I2C_M_TEN) {
-+ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+ i2c_w32(addr & 0xff, txd);
-+ } else {
-+ i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+ }
-+}
-+
-+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
-+
-+ priv->status = STATUS_ADDR;
-+
-+ if (!(msg->flags & I2C_M_RD))
-+ len += msg->len;
-+ else
-+ /* set maximum received packet size (before rx int!) */
-+ i2c_w32(msg->len, mrps_ctrl);
-+ i2c_w32(len, tps_ctrl);
-+ enable_burst_irq(priv);
-+}
-+
-+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
-+{
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+ unsigned int input_clock = clk_get_rate(priv->clk_input);
-+ u32 dec, inc = 1;
-+
-+ /* clock changed? */
-+ if (priv->input_clock == input_clock)
-+ return 0;
-+
-+ /*
-+ * this formula is only an approximation, found by the recommended
-+ * values in the "I2C Architecture Specification 1.7.1"
-+ */
-+ dec = input_clock / (priv->i2c_clock * 2);
-+ if (dec <= 6)
-+ return -ENXIO;
-+
-+ i2c_w32(0, fdiv_high_cfg);
-+ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
-+ (dec << I2C_FDIV_CFG_DEC_OFFSET),
-+ fdiv_cfg);
-+
-+ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
-+ input_clock, priv->i2c_clock, dec);
-+
-+ priv->input_clock = input_clock;
-+ return 0;
-+}
-+
-+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+ int ret = 0;
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+ /* set normal operation clock divider */
-+ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+ /* for debugging a higher divider value! */
-+ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+ /* setup clock */
-+ ret = ltq_i2c_hw_set_clock(adap);
-+ if (ret != 0) {
-+ dev_warn(priv->dev, "invalid clock settings\n");
-+ return ret;
-+ }
-+
-+ /* configure fifo */
-+ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
-+ fifo_cfg);
-+
-+ /* configure address */
-+ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in
-+ the fifo */
-+ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
-+ I2C_ADDR_CFG_MnS_EN | /* we are master device */
-+ 0, /* our slave address (not used!) */
-+ addr_cfg);
-+
-+ /* enable bus */
-+ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+ return 0;
-+}
-+
-+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
-+{
-+ unsigned long timeout;
-+
-+ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
-+
-+ do {
-+ u32 stat = i2c_r32(bus_stat);
-+
-+ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
-+ return 0;
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
-+
-+ dev_err(priv->dev, "timeout waiting for bus ready\n");
-+ return -ETIMEDOUT;
-+}
-+
-+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
-+{
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ i2c_w32(*priv->msg_buf, txd);
-+
-+ if (--priv->msg_buf_len)
-+ priv->msg_buf++;
-+ else
-+ priv->msg_buf = NULL;
-+ } else {
-+ last = 1;
-+ }
-+
-+ if (last)
-+ disable_burst_irq(priv);
-+}
-+
-+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
-+{
-+ u32 fifo_stat, timeout;
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ timeout = 5000000;
-+ do {
-+ fifo_stat = i2c_r32(ffs_stat);
-+ } while (!fifo_stat && --timeout);
-+ if (!timeout) {
-+ last = 1;
-+ pr_debug("\nrx timeout\n");
-+ goto err;
-+ }
-+ while (fifo_stat) {
-+ *priv->msg_buf = i2c_r32(rxd);
-+ if (--priv->msg_buf_len) {
-+ priv->msg_buf++;
-+ } else {
-+ priv->msg_buf = NULL;
-+ last = 1;
-+ break;
-+ }
-+ /*
-+ * do not read more than burst size, otherwise no "last
-+ * burst" is generated and the transaction is blocked!
-+ */
-+ fifo_stat = 0;
-+ }
-+ } else {
-+ last = 1;
-+ }
-+err:
-+ if (last) {
-+ disable_burst_irq(priv);
-+
-+ if (priv->status == STATUS_READ_END) {
-+ /*
-+ * do the STATUS_STOP and complete() here, as sometimes
-+ * the tx_end is already seen before this is finished
-+ */
-+ priv->status = STATUS_STOP;
-+ complete(&priv->cmd_complete);
-+ } else {
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+ priv->status = STATUS_READ_END;
-+ }
-+ }
-+}
-+
-+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
-+{
-+ /* enable interrupts */
-+ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+ /* trigger transfer of first msg */
-+ ltq_i2c_set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+ int i, j;
-+ pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
-+ for (i = 0; i < num; i++) {
-+ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
-+ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
-+ msgs[i].len, msgs[i].addr);
-+ if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+ for (j = 0; j < msgs[i].len; j++)
-+ pr_debug("%02X ", msgs[i].buf[j]);
-+ }
-+ pr_debug("\n");
-+ }
-+#endif
-+}
-+
-+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
-+{
-+ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+ int num)
-+{
-+ struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+ int ret;
-+
-+ dev_dbg(priv->dev, "xfer %u messages\n", num);
-+ dump_msgs(msgs, num, 0);
-+
-+ mutex_lock(&priv->mutex);
-+
-+ init_completion(&priv->cmd_complete);
-+ priv->current_msg = msgs;
-+ priv->msgs_num = num;
-+ priv->msg_err = 0;
-+ priv->status = STATUS_IDLE;
-+
-+ /* wait for the bus to become ready */
-+ ret = ltq_i2c_wait_bus_not_busy(priv);
-+ if (ret)
-+ goto done;
-+
-+ while (priv->msgs_num) {
-+ /* start the transfers */
-+ ltq_i2c_xfer_init(priv);
-+
-+ /* wait for transfers to complete */
-+ ret = wait_for_completion_interruptible_timeout(
-+ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
-+ if (ret == 0) {
-+ dev_err(priv->dev, "controller timed out\n");
-+ ltq_i2c_hw_init(adap);
-+ ret = -ETIMEDOUT;
-+ goto done;
-+ } else if (ret < 0)
-+ goto done;
-+
-+ if (priv->msg_err) {
-+ if (priv->msg_err & LTQ_I2C_NACK)
-+ ret = -ENXIO;
-+ else
-+ ret = -EREMOTEIO;
-+ goto done;
-+ }
-+ if (--priv->msgs_num)
-+ priv->current_msg++;
-+ }
-+ /* no error? */
-+ ret = num;
-+
-+done:
-+ ltq_i2c_release_bus(priv);
-+
-+ mutex_unlock(&priv->mutex);
-+
-+ if (ret >= 0)
-+ dump_msgs(msgs, num, 1);
-+
-+ pr_debug("XFER ret %d\n", ret);
-+ return ret;
-+}
-+
-+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
-+{
-+ struct ltq_i2c *priv = dev_id;
-+ struct i2c_msg *msg = priv->current_msg;
-+ int last = (irq == priv->irq_lb);
-+
-+ if (last)
-+ pr_debug("LB ");
-+ else
-+ pr_debug("B ");
-+
-+ if (msg->flags & I2C_M_RD) {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ pr_debug("X");
-+ prepare_msg_send_addr(priv);
-+ disable_burst_irq(priv);
-+ break;
-+ case STATUS_READ:
-+ case STATUS_READ_END:
-+ pr_debug("R");
-+ ltq_i2c_rx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ pr_warn("Status R %d\n", priv->status);
-+ break;
-+ }
-+ } else {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ pr_debug("x");
-+ prepare_msg_send_addr(priv);
-+ break;
-+ case STATUS_WRITE:
-+ pr_debug("w");
-+ ltq_i2c_tx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ pr_warn("Status W %d\n", priv->status);
-+ break;
-+ }
-+ }
-+
-+ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+ return IRQ_HANDLED;
-+}
-+
-+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
-+{
-+ u32 i_pro = i2c_r32(p_irqss);
-+
-+ pr_debug("i2c-p");
-+
-+ /* not acknowledge */
-+ if (i_pro & I2C_P_IRQSS_NACK) {
-+ priv->msg_err |= LTQ_I2C_NACK;
-+ pr_debug(" nack");
-+ }
-+
-+ /* arbitration lost */
-+ if (i_pro & I2C_P_IRQSS_AL) {
-+ priv->msg_err |= LTQ_I2C_ARB_LOST;
-+ pr_debug(" arb-lost");
-+ }
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX)
-+ pr_debug(" rx");
-+
-+ /* tx end */
-+ if (i_pro & I2C_P_IRQSS_TX_END)
-+ pr_debug(" txend");
-+ pr_debug("\n");
-+
-+ if (!priv->msg_err) {
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX) {
-+ priv->status = STATUS_READ;
-+ enable_burst_irq(priv);
-+ }
-+ if (i_pro & I2C_P_IRQSS_TX_END) {
-+ if (priv->status == STATUS_READ)
-+ priv->status = STATUS_READ_END;
-+ else {
-+ disable_burst_irq(priv);
-+ priv->status = STATUS_STOP;
-+ }
-+ }
-+ }
-+
-+ i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
-+{
-+ u32 i_raw, i_err = 0;
-+ struct ltq_i2c *priv = dev_id;
-+
-+ i_raw = i2c_r32(mis);
-+ pr_debug("i_raw 0x%08X\n", i_raw);
-+
-+ /* error interrupt */
-+ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+ i_err = i2c_r32(err_irqss);
-+ pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
-+ i_err, i2c_r32(bus_stat));
-+
-+ /* tx fifo overflow (8) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+ priv->msg_err |= LTQ_I2C_TX_OFL;
-+
-+ /* tx fifo underflow (4) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+ priv->msg_err |= LTQ_I2C_TX_UFL;
-+
-+ /* rx fifo overflow (2) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+ priv->msg_err |= LTQ_I2C_RX_OFL;
-+
-+ /* rx fifo underflow (1) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+ priv->msg_err |= LTQ_I2C_RX_UFL;
-+
-+ i2c_w32(i_err, err_irqsc);
-+ }
-+
-+ /* protocol interrupt */
-+ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+ ltq_i2c_isr_prot(priv);
-+
-+ if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+ complete(&priv->cmd_complete);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C |
-+ I2C_FUNC_10BIT_ADDR |
-+ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm ltq_i2c_algorithm = {
-+ .master_xfer = ltq_i2c_xfer,
-+ .functionality = ltq_i2c_functionality,
-+};
-+
-+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
-+{
-+ struct device_node *node = pdev->dev.of_node;
-+ struct ltq_i2c *priv;
-+ struct i2c_adapter *adap;
-+ struct resource *mmres, irqres[4];
-+ int ret = 0;
-+
-+ dev_dbg(&pdev->dev, "probing\n");
-+
-+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ret = of_irq_to_resource_table(node, irqres, 4);
-+ if (!mmres || (ret != 4)) {
-+ dev_err(&pdev->dev, "no resources\n");
-+ return -ENODEV;
-+ }
-+
-+ /* allocate private data */
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ dev_err(&pdev->dev, "can't allocate private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ adap = &priv->adap;
-+ i2c_set_adapdata(adap, priv);
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+ adap->algo = &ltq_i2c_algorithm;
-+
-+ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
-+ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
-+ priv->i2c_clock = 100000;
-+ }
-+
-+ init_completion(&priv->cmd_complete);
-+ mutex_init(&priv->mutex);
-+
-+ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
-+ if (priv->membase == NULL)
-+ return -ENOMEM;
-+
-+ priv->dev = &pdev->dev;
-+ priv->irq_lb = irqres[0].start;
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
-+ 0x0, "i2c lb", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+ irqres[0].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
-+ 0x0, "i2c b", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+ irqres[1].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
-+ 0x0, "i2c err", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+ irqres[2].start);
-+ return -ENODEV;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
-+ 0x0, "i2c p", priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+ irqres[3].start);
-+ return -ENODEV;
-+ }
-+
-+ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
-+ irqres[1].start, irqres[2].start, irqres[3].start);
-+
-+ priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->clk_gate)) {
-+ dev_err(&pdev->dev, "failed to get i2c clk\n");
-+ return -ENOENT;
-+ }
-+
-+ /* this is a static clock, which has no refcounting */
-+ priv->clk_input = clk_get_fpi();
-+ if (IS_ERR(priv->clk_input)) {
-+ dev_err(&pdev->dev, "failed to get fpi clk\n");
-+ return -ENOENT;
-+ }
-+
-+ clk_activate(priv->clk_gate);
-+
-+ /* add our adapter to the i2c stack */
-+ ret = i2c_add_numbered_adapter(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't register I2C adapter\n");
-+ goto out;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ i2c_set_adapdata(adap, priv);
-+
-+ /* print module version information */
-+ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+ /* initialize HW */
-+ ret = ltq_i2c_hw_init(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't configure adapter\n");
-+ i2c_del_adapter(adap);
-+ platform_set_drvdata(pdev, NULL);
-+ } else {
-+ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+ }
-+
-+ of_i2c_register_devices(adap);
-+
-+out:
-+ /* if init failed, we need to deactivate the clock gate */
-+ if (ret)
-+ clk_deactivate(priv->clk_gate);
-+
-+ return ret;
-+}
-+
-+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
-+{
-+ struct ltq_i2c *priv = platform_get_drvdata(pdev);
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+ /* power down the core */
-+ clk_deactivate(priv->clk_gate);
-+
-+ /* remove driver */
-+ i2c_del_adapter(&priv->adap);
-+ kfree(priv);
-+
-+ dev_dbg(&pdev->dev, "removed\n");
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+static const struct of_device_id ltq_i2c_match[] = {
-+ { .compatible = "lantiq,lantiq-i2c" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
-+
-+static struct platform_driver ltq_i2c_driver = {
-+ .probe = ltq_i2c_probe,
-+ .remove = __devexit_p(ltq_i2c_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = ltq_i2c_match,
-+ },
-+};
-+
-+module_platform_driver(ltq_i2c_driver);
-+
-+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
-+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.h
-@@ -0,0 +1,234 @@
-+#ifndef I2C_LANTIQ_H
-+#define I2C_LANTIQ_H
-+
-+/* I2C register structure */
-+struct lantiq_reg_i2c {
-+ /* I2C Kernel Clock Control Register */
-+ unsigned int clc; /* 0x00000000 */
-+ /* Reserved */
-+ unsigned int res_0; /* 0x00000004 */
-+ /* I2C Identification Register */
-+ unsigned int id; /* 0x00000008 */
-+ /* Reserved */
-+ unsigned int res_1; /* 0x0000000C */
-+ /*
-+ * I2C RUN Control Register
-+ * This register enables and disables the I2C peripheral. Before
-+ * enabling, the I2C has to be configured properly. After enabling
-+ * no configuration is possible
-+ */
-+ unsigned int run_ctrl; /* 0x00000010 */
-+ /*
-+ * I2C End Data Control Register
-+ * This register is used to either turn around the data transmission
-+ * direction or to address another slave without sending a stop
-+ * condition. Also the software can stop the slave-transmitter by
-+ * sending a not-accolade when working as master-receiver or even
-+ * stop data transmission immediately when operating as
-+ * master-transmitter. The writing to the bits of this control
-+ * register is only effective when in MASTER RECEIVES BYTES, MASTER
-+ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+ */
-+ unsigned int endd_ctrl; /* 0x00000014 */
-+ /*
-+ * I2C Fractional Divider Configuration Register
-+ * These register is used to program the fractional divider of the I2C
-+ * bus. Before the peripheral is switched on by setting the RUN-bit the
-+ * two (fixed) values for the two operating frequencies are programmed
-+ * into these (configuration) registers. The Register FDIV_HIGH_CFG has
-+ * the same layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_cfg; /* 0x00000018 */
-+ /*
-+ * I2C Fractional Divider (highspeed mode) Configuration Register
-+ * These register is used to program the fractional divider of the I2C
-+ * bus. Before the peripheral is switched on by setting the RUN-bit the
-+ * two (fixed) values for the two operating frequencies are programmed
-+ * into these (configuration) registers. The Register FDIV_CFG has the
-+ * same layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_high_cfg; /* 0x0000001C */
-+ /* I2C Address Configuration Register */
-+ unsigned int addr_cfg; /* 0x00000020 */
-+ /* I2C Bus Status Register
-+ * This register gives a status information of the I2C. This additional
-+ * information can be used by the software to start proper actions.
-+ */
-+ unsigned int bus_stat; /* 0x00000024 */
-+ /* I2C FIFO Configuration Register */
-+ unsigned int fifo_cfg; /* 0x00000028 */
-+ /* I2C Maximum Received Packet Size Register */
-+ unsigned int mrps_ctrl; /* 0x0000002C */
-+ /* I2C Received Packet Size Status Register */
-+ unsigned int rps_stat; /* 0x00000030 */
-+ /* I2C Transmit Packet Size Register */
-+ unsigned int tps_ctrl; /* 0x00000034 */
-+ /* I2C Filled FIFO Stages Status Register */
-+ unsigned int ffs_stat; /* 0x00000038 */
-+ /* Reserved */
-+ unsigned int res_2; /* 0x0000003C */
-+ /* I2C Timing Configuration Register */
-+ unsigned int tim_cfg; /* 0x00000040 */
-+ /* Reserved */
-+ unsigned int res_3[7]; /* 0x00000044 */
-+ /* I2C Error Interrupt Request Source Mask Register */
-+ unsigned int err_irqsm; /* 0x00000060 */
-+ /* I2C Error Interrupt Request Source Status Register */
-+ unsigned int err_irqss; /* 0x00000064 */
-+ /* I2C Error Interrupt Request Source Clear Register */
-+ unsigned int err_irqsc; /* 0x00000068 */
-+ /* Reserved */
-+ unsigned int res_4; /* 0x0000006C */
-+ /* I2C Protocol Interrupt Request Source Mask Register */
-+ unsigned int p_irqsm; /* 0x00000070 */
-+ /* I2C Protocol Interrupt Request Source Status Register */
-+ unsigned int p_irqss; /* 0x00000074 */
-+ /* I2C Protocol Interrupt Request Source Clear Register */
-+ unsigned int p_irqsc; /* 0x00000078 */
-+ /* Reserved */
-+ unsigned int res_5; /* 0x0000007C */
-+ /* I2C Raw Interrupt Status Register */
-+ unsigned int ris; /* 0x00000080 */
-+ /* I2C Interrupt Mask Control Register */
-+ unsigned int imsc; /* 0x00000084 */
-+ /* I2C Masked Interrupt Status Register */
-+ unsigned int mis; /* 0x00000088 */
-+ /* I2C Interrupt Clear Register */
-+ unsigned int icr; /* 0x0000008C */
-+ /* I2C Interrupt Set Register */
-+ unsigned int isr; /* 0x00000090 */
-+ /* I2C DMA Enable Register */
-+ unsigned int dmae; /* 0x00000094 */
-+ /* Reserved */
-+ unsigned int res_6[8154]; /* 0x00000098 */
-+ /* I2C Transmit Data Register */
-+ unsigned int txd; /* 0x00008000 */
-+ /* Reserved */
-+ unsigned int res_7[4095]; /* 0x00008004 */
-+ /* I2C Receive Data Register */
-+ unsigned int rxd; /* 0x0000C000 */
-+ /* Reserved */
-+ unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/*
-+ * Clock Divider for Normal Run Mode
-+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
-+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
-+ * on reading.
-+ */
-+#define I2C_CLC_RMC_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+
-+/* Fields of "I2C Identification Register" */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+
-+/* Fields of "I2C Error Interrupt Request Source Status Register" */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* Fields of "I2C Raw Interrupt Status Register" */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+/* Stop on Packet End Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Stop on Not Acknowledge Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* Fields of "I2C Interrupt Clear Register" */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* Fields of "I2C Bus Status Register" */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* Read from I2C Bus. */
-+#define I2C_BUS_STAT_RNW_READ 0x00000004
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control on the
-+ * I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* Fields of "I2C RUN Control Register" */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* Fields of "I2C End Data Control Register" */
-+/*
-+ * Set End of Transmission
-+ * Note:Do not write '1' to this bit when bus is free. This will cause an
-+ * abort after the first byte when a new transfer is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+
-+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+
-+
-+#endif /* I2C_LANTIQ_H */
diff --git a/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch
deleted file mode 100644
index 79c811705e..0000000000
--- a/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 32/36] USB: fix roothub for IFXHCD
-
----
- arch/mips/lantiq/Kconfig | 1 +
- drivers/usb/core/hub.c | 2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -3,6 +3,7 @@ if LANTIQ
- config SOC_TYPE_XWAY
- bool
- select PINCTRL_XWAY
-+ select USB_ARCH_HAS_HCD
- default n
-
- choice
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4298,7 +4298,7 @@ hub_port_init (struct usb_hub *hub, stru
- udev->ttport = hdev->ttport;
- } else if (udev->speed != USB_SPEED_HIGH
- && hdev->speed == USB_SPEED_HIGH) {
-- if (!hub->tt.hub) {
-+ if (hdev->parent && !hub->tt.hub) {
- dev_err(&udev->dev, "parent hub has no TT\n");
- retval = -EINVAL;
- goto fail;
diff --git a/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
deleted file mode 100644
index ddbe134c1b..0000000000
--- a/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 18:47:27 +0200
-Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not
- selected
-
-Drivers need to protect their reset api calls with #ifdef to avoid compile
-errors.
-
-This patch adds dummy wrappers in the same way that linux/of.h does it.
-
-Cc: linux-kernel@vger.kernel.org
-Cc: Philipp Zabel <p.zabel@pengutronix.de>
-Cc: Gabor Juhos <juhosg@openwrt.org>
----
- include/linux/reset-controller.h | 16 ++++++++++++++
- include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 59 insertions(+)
-
---- a/include/linux/reset-controller.h
-+++ b/include/linux/reset-controller.h
-@@ -48,7 +48,23 @@ struct reset_controller_dev {
- unsigned int nr_resets;
- };
-
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_controller_register(struct reset_controller_dev *rcdev);
- void reset_controller_unregister(struct reset_controller_dev *rcdev);
-
-+#else
-+
-+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
-+{
-+ return -ENOSYS;
-+}
-+
-+void reset_controller_unregister(struct reset_controller_dev *rcdev)
-+{
-+
-+}
-+
-+#endif
-+
- #endif
diff --git a/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
deleted file mode 100644
index edf7a0b8ec..0000000000
--- a/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ /dev/null
@@ -1,630 +0,0 @@
-From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:42:14 +0200
-Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
- arch/mips/lantiq/xway/Makefile | 3 +
- arch/mips/lantiq/xway/ath_eep.c | 282 ++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c | 76 ++++++
- arch/mips/lantiq/xway/pci-ath-fixup.c | 109 ++++++++
- arch/mips/lantiq/xway/rt_eep.c | 60 +++++
- 7 files changed, 539 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
- create mode 100644 arch/mips/lantiq/xway/ath_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
- create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
- create mode 100644 arch/mips/lantiq/xway/rt_eep.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-@@ -0,0 +1,6 @@
-+#ifndef _PCI_ATH_FIXUP
-+#define _PCI_ATH_FIXUP
-+
-+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-+
-+#endif /* _PCI_ATH_FIXUP */
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
-
-+/* allow the ethernet driver to load a flash mapped mac addr */
-+const u8* ltq_get_eth_mac(void);
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
-
- obj-y += vmmc.o tffs.o
-
-+obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,298 @@
-+/*
-+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
-+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
-+ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ * Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ath5k_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/pci.h>
-+#include <linux/err.h>
-+#include <linux/mtd/mtd.h>
-+#include <pci-ath-fixup.h>
-+#include <lantiq_soc.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+struct ath5k_platform_data ath5k_pdata;
-+struct ath9k_platform_data ath9k_pdata = {
-+ .led_pin = -1,
-+};
-+static u8 athxk_eeprom_mac[6];
-+
-+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &ath9k_pdata;
-+ return 0;
-+}
-+
-+static int ath9k_eep_load;
-+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node, *mtd_np;
-+ struct resource *eep_res, *mac_res = NULL;
-+ void __iomem *eep, *mac;
-+ int mac_offset, led_pin;
-+ u32 mac_inc = 0, pci_slot = 0;
-+ int i;
-+ struct mtd_info *the_mtd;
-+ size_t flash_readlen;
-+ const __be32 *list;
-+ const char *part;
-+ phandle phandle;
-+
-+ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+ of_get_property(mtd_np, "label", NULL)) || (part =
-+ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+ != ERR_PTR(-ENODEV)) {
-+ i = mtd_read(the_mtd, be32_to_cpup(list),
-+ ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+ (void *) ath9k_pdata.eeprom_data);
-+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+ size_t mac_readlen;
-+ mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
-+ (void *) athxk_eeprom_mac);
-+ }
-+ put_mtd_device(the_mtd);
-+ if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+ return -ENODEV;
-+ }
-+ } else {
-+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+ if (!eep_res) {
-+ dev_err(&pdev->dev, "failed to load eeprom address\n");
-+ return -ENODEV;
-+ }
-+ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
-+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+ return -EINVAL;
-+ }
-+
-+ eep = ioremap(eep_res->start, resource_size(eep_res));
-+ memcpy_fromio(ath9k_pdata.eeprom_data, eep,
-+ ATH9K_PLAT_EEP_MAX_WORDS << 1);
-+ }
-+
-+ if (of_find_property(np, "ath,eep-swap", NULL))
-+ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
-+ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
-+
-+ if (of_find_property(np, "ath,eep-endian", NULL)) {
-+ ath9k_pdata.endian_check = true;
-+
-+ dev_info(&pdev->dev, "endian check enabled.\n");
-+ }
-+
-+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+ if (mac_res) {
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+ } else if (ltq_get_eth_mac()) {
-+ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+ }
-+ }
-+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+ dev_warn(&pdev->dev, "using random mac\n");
-+ random_ether_addr(athxk_eeprom_mac);
-+ }
-+
-+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+ athxk_eeprom_mac[5] += mac_inc;
-+
-+ ath9k_pdata.macaddr = athxk_eeprom_mac;
-+ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
-+
-+ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
-+ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
-+ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
-+ if (ath9k_eep_load) {
-+ struct pci_dev *d = NULL;
-+ while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
-+ PCI_ANY_ID, d)) != NULL)
-+ pci_fixup_device(pci_fixup_early, d);
-+ }
-+
-+ }
-+
-+ if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
-+ ath9k_pdata.led_pin = led_pin;
-+ dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
-+ }
-+
-+ if (of_property_read_bool(np, "ath,led-active-high")) {
-+ ath9k_pdata.led_active_high = true;
-+ dev_info(&pdev->dev, "inverted LED polarity\n");
-+ }
-+
-+ if (of_property_read_bool(np, "ath,disable-2ghz")) {
-+ ath9k_pdata.disable_2ghz = true;
-+ dev_info(&pdev->dev, "disabled 2.4 GHz band\n");
-+ }
-+
-+ if (of_property_read_bool(np, "ath,disable-5ghz")) {
-+ ath9k_pdata.disable_5ghz = true;
-+ dev_info(&pdev->dev, "disabled 5 GHz band\n");
-+ }
-+
-+ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ath9k_eeprom_ids[] = {
-+ { .compatible = "ath9k,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ath9k_eeprom_driver = {
-+ .driver = {
-+ .name = "ath9k,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ath9k_eeprom_init(void)
-+{
-+ int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+
-+ if (ret)
-+ ath9k_eep_load = 1;
-+
-+ return ret;
-+}
-+
-+static int __init of_ath9k_eeprom_init_late(void)
-+{
-+ if (!ath9k_eep_load)
-+ return 0;
-+ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+}
-+late_initcall(of_ath9k_eeprom_init_late);
-+subsys_initcall(of_ath9k_eeprom_init);
-+
-+
-+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &ath5k_pdata;
-+ return 0;
-+}
-+
-+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node, *mtd_np;
-+ struct resource *eep_res, *mac_res = NULL;
-+ void __iomem *eep, *mac;
-+ int mac_offset;
-+ u32 mac_inc = 0;
-+ int i;
-+ struct mtd_info *the_mtd;
-+ size_t flash_readlen;
-+ const __be32 *list;
-+ const char *part;
-+ phandle phandle;
-+
-+ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+ (mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+ of_get_property(mtd_np, "label", NULL)) || (part =
-+ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+ != ERR_PTR(-ENODEV)) {
-+ i = mtd_read(the_mtd, be32_to_cpup(list),
-+ ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+ (void *) ath5k_pdata.eeprom_data);
-+ put_mtd_device(the_mtd);
-+ if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
-+ || i) {
-+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+ return -ENODEV;
-+ }
-+ } else {
-+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+ if (!eep_res) {
-+ dev_err(&pdev->dev, "failed to load eeprom address\n");
-+ return -ENODEV;
-+ }
-+ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
-+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+ return -EINVAL;
-+ }
-+
-+ eep = ioremap(eep_res->start, resource_size(eep_res));
-+ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1,
-+ GFP_KERNEL);
-+ memcpy_fromio(ath5k_pdata.eeprom_data, eep,
-+ ATH5K_PLAT_EEP_MAX_WORDS << 1);
-+ }
-+
-+ if (of_find_property(np, "ath,eep-swap", NULL))
-+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
-+
-+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
-+ } else if (mac_res) {
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+ } else if (ltq_get_eth_mac())
-+ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+ else {
-+ dev_warn(&pdev->dev, "using random mac\n");
-+ random_ether_addr(athxk_eeprom_mac);
-+ }
-+
-+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+ athxk_eeprom_mac[5] += mac_inc;
-+
-+ ath5k_pdata.macaddr = athxk_eeprom_mac;
-+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
-+
-+ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ath5k_eeprom_ids[] = {
-+ { .compatible = "ath5k,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ath5k_eeprom_driver = {
-+ .driver = {
-+ .name = "ath5k,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ath5k_eeprom_init(void)
-+{
-+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+}
-+device_initcall(of_ath5k_eeprom_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/eth_mac.c
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/if_ether.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+ return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+ eth_mac_set = mac_pton(str, eth_mac);
-+ return !eth_mac_set;
-+}
-+__setup("ethaddr=", setup_ethaddr);
-+
-+int __init of_eth_mac_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *mac_res;
-+ void __iomem *mac;
-+ u32 mac_inc = 0;
-+
-+ if (eth_mac_set) {
-+ dev_err(&pdev->dev, "mac was already set by bootloader\n");
-+ return -EINVAL;
-+ }
-+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (!mac_res) {
-+ dev_err(&pdev->dev, "failed to load mac\n");
-+ return -EINVAL;
-+ }
-+ if (resource_size(mac_res) != 6) {
-+ dev_err(&pdev->dev, "mac has an invalid size\n");
-+ return -EINVAL;
-+ }
-+ mac = ioremap(mac_res->start, resource_size(mac_res));
-+ memcpy_fromio(eth_mac, mac, 6);
-+
-+ if (!of_property_read_u32(np, "mac-increment", &mac_inc))
-+ eth_mac[5] += mac_inc;
-+
-+ return 0;
-+}
-+
-+static struct of_device_id eth_mac_ids[] = {
-+ { .compatible = "lantiq,eth-mac" },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver eth_mac_driver = {
-+ .driver = {
-+ .name = "lantiq,eth-mac",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(eth_mac_ids),
-+ },
-+};
-+
-+static int __init of_eth_mac_init(void)
-+{
-+ return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
-+}
-+device_initcall(of_eth_mac_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
-@@ -0,0 +1,118 @@
-+/*
-+ * Atheros AP94 reference board PCI initialization
-+ *
-+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <lantiq_soc.h>
-+
-+struct ath_fixup {
-+ u16 *cal_data;
-+ unsigned slot;
-+};
-+
-+static int ath_num_fixups;
-+static struct ath_fixup ath_fixups[2];
-+
-+static void ath_pci_fixup(struct pci_dev *dev)
-+{
-+ void __iomem *mem;
-+ struct pci_dev *bridge = pci_upstream_bridge(dev);
-+ u16 *cal_data = NULL;
-+ u16 cmd;
-+ u32 bar0;
-+ u32 val;
-+ u32 base;
-+ unsigned i;
-+
-+ for (i = 0; i < ath_num_fixups; i++) {
-+ if (ath_fixups[i].cal_data == NULL)
-+ continue;
-+
-+ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
-+ continue;
-+
-+ cal_data = ath_fixups[i].cal_data;
-+ break;
-+ }
-+
-+ if (cal_data == NULL)
-+ return;
-+
-+ if (*cal_data != 0xa55a) {
-+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+ return;
-+ }
-+
-+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+ base = dev->resource[0].start;
-+ mem = ioremap(base, 0x10000);
-+ if (!mem) {
-+ pr_err("pci %s: ioremap error\n", pci_name(dev));
-+ return;
-+ }
-+
-+ if (bridge) {
-+ pci_enable_device(dev);
-+ }
-+
-+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, base);
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ /* set pointer to first reg address */
-+ cal_data += 3;
-+ while (*cal_data != 0xffff) {
-+ u32 reg;
-+ reg = *cal_data++;
-+ val = *cal_data++;
-+ val |= (*cal_data++) << 16;
-+
-+ ltq_w32(swab32(val), mem + reg);
-+ udelay(100);
-+ }
-+
-+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+ dev->vendor = val & 0xffff;
-+ dev->device = (val >> 16) & 0xffff;
-+
-+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+ dev->revision = val & 0xff;
-+ dev->class = val >> 8; /* upper 3 bytes */
-+
-+ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
-+ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+ if (bridge) {
-+ pci_disable_device(dev);
-+ }
-+
-+ iounmap(mem);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-+
-+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-+{
-+ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
-+ return;
-+
-+ ath_fixups[ath_num_fixups].slot = slot;
-+ ath_fixups[ath_num_fixups].cal_data = cal_data;
-+ ath_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/lantiq/xway/rt_eep.c
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+static struct rt2x00_platform_data rt2x00_pdata;
-+
-+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ dev->dev.platform_data = &rt2x00_pdata;
-+ return 0;
-+}
-+
-+int __init of_ralink_eeprom_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ const char *eeprom;
-+
-+ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
-+ dev_err(&pdev->dev, "failed to load eeprom filename\n");
-+ return 0;
-+ }
-+
-+ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+// rt2x00_pdata.mac_address = mac;
-+ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
-+
-+ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
-+
-+ return 0;
-+}
-+
-+static struct of_device_id ralink_eeprom_ids[] = {
-+ { .compatible = "ralink,eeprom" },
-+ { }
-+};
-+
-+static struct platform_driver ralink_eeprom_driver = {
-+ .driver = {
-+ .name = "ralink,eeprom",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(ralink_eeprom_ids),
-+ },
-+};
-+
-+static int __init of_ralink_eeprom_init(void)
-+{
-+ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
-+}
-+device_initcall(of_ralink_eeprom_init);
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
- if (err)
- goto err_hw;
-
-- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-+ if (priv->mac)
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ else
-+ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
-+
- if (!is_valid_ether_addr(mac.sa_data)) {
- pr_warn("etop: invalid MAC, using random\n");
- eth_random_addr(mac.sa_data);
diff --git a/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch
deleted file mode 100644
index 7a306b301e..0000000000
--- a/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:32:12 +0200
-Subject: [PATCH 36/36] owrt: generic dtb image hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/head.S | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -86,6 +86,9 @@ EXPORT(__image_cmdline)
- .fill 0x400
- #endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-+ .ascii "OWRTDTB:"
-+ EXPORT(__image_dtb)
-+ .fill 0x4000
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -32,7 +32,6 @@ choice
- config DT_EASY50712
- bool "Easy50712"
- depends on SOC_XWAY
-- select BUILTIN_DTB
- endchoice
-
- config PCI_LANTIQ
diff --git a/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch b/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch
deleted file mode 100644
index 5fbe0a1137..0000000000
--- a/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Return correct value for fpi clock on ar9.
-
-Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
----
- arch/mips/lantiq/xway/clk.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -87,8 +87,9 @@ unsigned long ltq_ar9_fpi_hz(void)
- unsigned long sys = ltq_ar9_sys_hz();
-
- if (ltq_cgu_r32(CGU_SYS) & BIT(0))
-- return sys;
-- return sys >> 1;
-+ return sys / 3;
-+ else
-+ return sys / 2;
- }
-
- unsigned long ltq_ar9_cpu_hz(void)
diff --git a/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch b/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch
deleted file mode 100644
index fd0da8ed50..0000000000
--- a/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -44,6 +44,37 @@
- #define RCU_BOOT_SEL(x) ((x >> 18) & 0x7)
- #define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10))
-
-+/* dwc2 USB configuration registers */
-+#define RCU_USB1CFG 0x0018
-+#define RCU_USB2CFG 0x0034
-+
-+/* USB DMA endianness bits */
-+#define RCU_USBCFG_HDSEL_BIT BIT(11)
-+#define RCU_USBCFG_HOST_END_BIT BIT(10)
-+#define RCU_USBCFG_SLV_END_BIT BIT(9)
-+
-+/* USB reset bits */
-+#define RCU_USBRESET 0x0010
-+
-+#define USBRESET_BIT BIT(4)
-+
-+#define RCU_USBRESET2 0x0048
-+
-+#define USB1RESET_BIT BIT(4)
-+#define USB2RESET_BIT BIT(5)
-+
-+#define RCU_CFG1A 0x0038
-+#define RCU_CFG1B 0x003C
-+
-+/* USB PMU devices */
-+#define PMU_AHBM BIT(15)
-+#define PMU_USB0 BIT(6)
-+#define PMU_USB1 BIT(27)
-+
-+/* USB PHY PMU devices */
-+#define PMU_USB0_P BIT(0)
-+#define PMU_USB1_P BIT(26)
-+
- /* remapped base addr of the reset control unit */
- static void __iomem *ltq_rcu_membase;
- static struct device_node *ltq_rcu_np;
-@@ -200,6 +231,45 @@ static void ltq_machine_power_off(void)
- unreachable();
- }
-
-+static void ltq_usb_init(void)
-+{
-+ /* Power for USB cores 1 & 2 */
-+ ltq_pmu_enable(PMU_AHBM);
-+ ltq_pmu_enable(PMU_USB0);
-+ ltq_pmu_enable(PMU_USB1);
-+
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
-+
-+ /* Enable USB PHY power for cores 1 & 2 */
-+ ltq_pmu_enable(PMU_USB0_P);
-+ ltq_pmu_enable(PMU_USB1_P);
-+
-+ /* Configure cores to host mode */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB2CFG);
-+
-+ /* Select DMA endianness (Host-endian: big-endian) */
-+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+
-+ /* Hard reset USB state machines */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
-+ udelay(50 * 1000);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-+
-+ /* Soft reset USB state machines */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
-+ udelay(50 * 1000);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+}
-+
- static int __init mips_reboot_setup(void)
- {
- struct resource res;
-@@ -223,6 +293,10 @@ static int __init mips_reboot_setup(void
- if (!ltq_rcu_membase)
- panic("Failed to remap core memory");
-
-+ if (of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,vr9"))
-+ ltq_usb_init();
-+
- _machine_restart = ltq_machine_restart;
- _machine_halt = ltq_machine_halt;
- pm_power_off = ltq_machine_power_off;
diff --git a/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch
deleted file mode 100644
index 9c6f11cb13..0000000000
--- a/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -41,6 +41,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/of_device.h>
- #include <linux/mutex.h>
-+#include <linux/of_gpio.h>
- #include <linux/platform_device.h>
-
- #include <linux/usb/of.h>
-@@ -161,6 +162,7 @@ static int dwc2_driver_probe(struct plat
- struct usb_phy *uphy;
- int retval;
- int irq;
-+ int gpio_count;
-
- match = of_match_device(dwc2_of_match_table, &dev->dev);
- if (match && match->data) {
-@@ -177,6 +179,16 @@ static int dwc2_driver_probe(struct plat
- defparams.dma_desc_enable = 0;
- }
-
-+ gpio_count = of_gpio_count(dev->dev.of_node);
-+ while (gpio_count > 0) {
-+ enum of_gpio_flags flags;
-+ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
-+ if (gpio_request(gpio, "usb"))
-+ continue;
-+ dev_info(&dev->dev, "requested GPIO %d\n", gpio);
-+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+
- hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
- if (!hsotg)
- return -ENOMEM;
diff --git a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch
deleted file mode 100644
index 0b5d09bed2..0000000000
--- a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -107,6 +107,34 @@ static const struct dwc2_core_params par
- .uframe_sched = -1,
- };
-
-+static const struct dwc2_core_params params_ltq = {
-+ .otg_cap = 2, /* non-HNP/non-SRP */
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = 288, /* 288 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
-+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
-+ .max_transfer_size = -1,
-+ .max_packet_count = 511,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
-+ .uframe_sched = -1,
-+};
-+
- /**
- * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
- * DWC_otg driver
-@@ -133,6 +161,8 @@ static int dwc2_driver_remove(struct pla
- static const struct of_device_id dwc2_of_match_table[] = {
- { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
-+ { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
-+ { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
- { .compatible = "snps,dwc2", .data = NULL },
- { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
- {},
diff --git a/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch b/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch
deleted file mode 100644
index 2d8ccab2a5..0000000000
--- a/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch
+++ /dev/null
@@ -1,3156 +0,0 @@
---- a/drivers/usb/dwc2/core.c
-+++ b/drivers/usb/dwc2/core.c
-@@ -67,10 +67,10 @@ static void dwc2_enable_common_interrupt
- u32 intmsk;
-
- /* Clear any pending OTG Interrupts */
-- writel(0xffffffff, hsotg->regs + GOTGINT);
-+ dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
-
- /* Clear any pending interrupts */
-- writel(0xffffffff, hsotg->regs + GINTSTS);
-+ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
-
- /* Enable the interrupts in the GINTMSK */
- intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
-@@ -81,7 +81,7 @@ static void dwc2_enable_common_interrupt
- intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP |
- GINTSTS_SESSREQINT;
-
-- writel(intmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
-
- /*
-@@ -104,10 +104,10 @@ static void dwc2_init_fs_ls_pclk_sel(str
- }
-
- dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
-
- /*
-@@ -125,7 +125,7 @@ static int dwc2_core_reset(struct dwc2_h
- /* Wait for AHB master IDLE state */
- do {
- usleep_range(20000, 40000);
-- greset = readl(hsotg->regs + GRSTCTL);
-+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 50) {
- dev_warn(hsotg->dev,
- "%s() HANG! AHB Idle GRSTCTL=%0x\n",
-@@ -137,10 +137,10 @@ static int dwc2_core_reset(struct dwc2_h
- /* Core Soft Reset */
- count = 0;
- greset |= GRSTCTL_CSFTRST;
-- writel(greset, hsotg->regs + GRSTCTL);
-+ dwc2_writel(greset, hsotg->regs + GRSTCTL);
- do {
- usleep_range(20000, 40000);
-- greset = readl(hsotg->regs + GRSTCTL);
-+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 50) {
- dev_warn(hsotg->dev,
- "%s() HANG! Soft Reset GRSTCTL=%0x\n",
-@@ -150,20 +150,20 @@ static int dwc2_core_reset(struct dwc2_h
- } while (greset & GRSTCTL_CSFTRST);
-
- if (hsotg->dr_mode == USB_DR_MODE_HOST) {
-- gusbcfg = readl(hsotg->regs + GUSBCFG);
-+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
- gusbcfg |= GUSBCFG_FORCEHOSTMODE;
-- writel(gusbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
-- gusbcfg = readl(hsotg->regs + GUSBCFG);
-+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- gusbcfg |= GUSBCFG_FORCEDEVMODE;
-- writel(gusbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- } else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
-- gusbcfg = readl(hsotg->regs + GUSBCFG);
-+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
-- writel(gusbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- }
-
- /*
-@@ -186,9 +186,9 @@ static int dwc2_fs_phy_init(struct dwc2_
- */
- if (select_phy) {
- dev_dbg(hsotg->dev, "FS PHY selected\n");
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_PHYSEL;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after a PHY select */
- retval = dwc2_core_reset(hsotg);
-@@ -211,18 +211,18 @@ static int dwc2_fs_phy_init(struct dwc2_
- dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
-
- /* Program GUSBCFG.OtgUtmiFsSel to I2C */
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Program GI2CCTL.I2CEn */
-- i2cctl = readl(hsotg->regs + GI2CCTL);
-+ i2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
- i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
- i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
- i2cctl &= ~GI2CCTL_I2CEN;
-- writel(i2cctl, hsotg->regs + GI2CCTL);
-+ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- i2cctl |= GI2CCTL_I2CEN;
-- writel(i2cctl, hsotg->regs + GI2CCTL);
-+ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- }
-
- return retval;
-@@ -236,7 +236,7 @@ static int dwc2_hs_phy_init(struct dwc2_
- if (!select_phy)
- return 0;
-
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /*
- * HS PHY parameters. These parameters are preserved during soft reset
-@@ -264,7 +264,7 @@ static int dwc2_hs_phy_init(struct dwc2_
- break;
- }
-
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after setting the PHY parameters */
- retval = dwc2_core_reset(hsotg);
-@@ -299,15 +299,15 @@ static int dwc2_phy_init(struct dwc2_hso
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- hsotg->core_params->ulpi_fs_ls > 0) {
- dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_ULPI_FS_LS;
- usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- } else {
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~GUSBCFG_ULPI_FS_LS;
- usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- }
-
- return retval;
-@@ -315,7 +315,7 @@ static int dwc2_phy_init(struct dwc2_hso
-
- static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
- {
-- u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- switch (hsotg->hw_params.arch) {
- case GHWCFG2_EXT_DMA_ARCH:
-@@ -354,7 +354,7 @@ static int dwc2_gahbcfg_init(struct dwc2
- if (hsotg->core_params->dma_enable > 0)
- ahbcfg |= GAHBCFG_DMA_EN;
-
-- writel(ahbcfg, hsotg->regs + GAHBCFG);
-+ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
-
- return 0;
- }
-@@ -363,7 +363,7 @@ static void dwc2_gusbcfg_init(struct dwc
- {
- u32 usbcfg;
-
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
-
- switch (hsotg->hw_params.op_mode) {
-@@ -391,7 +391,7 @@ static void dwc2_gusbcfg_init(struct dwc
- break;
- }
-
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- }
-
- /**
-@@ -409,7 +409,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs
-
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /* Set ULPI External VBUS bit if needed */
- usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
-@@ -422,7 +422,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs
- if (hsotg->core_params->ts_dline > 0)
- usbcfg |= GUSBCFG_TERMSELDLPULSE;
-
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset the Controller */
- retval = dwc2_core_reset(hsotg);
-@@ -448,11 +448,11 @@ int dwc2_core_init(struct dwc2_hsotg *hs
- dwc2_gusbcfg_init(hsotg);
-
- /* Program the GOTGCTL register */
-- otgctl = readl(hsotg->regs + GOTGCTL);
-+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_OTGVER;
- if (hsotg->core_params->otg_ver > 0)
- otgctl |= GOTGCTL_OTGVER;
-- writel(otgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
-
- /* Clear the SRP success bit for FS-I2c */
-@@ -488,16 +488,16 @@ void dwc2_enable_host_interrupts(struct
- dev_dbg(hsotg->dev, "%s()\n", __func__);
-
- /* Disable all interrupts */
-- writel(0, hsotg->regs + GINTMSK);
-- writel(0, hsotg->regs + HAINTMSK);
-+ dwc2_writel(0, hsotg->regs + GINTMSK);
-+ dwc2_writel(0, hsotg->regs + HAINTMSK);
-
- /* Enable the common interrupts */
- dwc2_enable_common_interrupts(hsotg);
-
- /* Enable host mode interrupts without disturbing common interrupts */
-- intmsk = readl(hsotg->regs + GINTMSK);
-+ intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
-- writel(intmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
-
- /**
-@@ -507,12 +507,12 @@ void dwc2_enable_host_interrupts(struct
- */
- void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
- {
-- u32 intmsk = readl(hsotg->regs + GINTMSK);
-+ u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- /* Disable host mode interrupts without disturbing common interrupts */
- intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
- GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP);
-- writel(intmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- }
-
- /*
-@@ -592,36 +592,36 @@ static void dwc2_config_fifos(struct dwc
- dwc2_calculate_dynamic_fifo(hsotg);
-
- /* Rx FIFO */
-- grxfsiz = readl(hsotg->regs + GRXFSIZ);
-+ grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
- dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
- grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
- grxfsiz |= params->host_rx_fifo_size <<
- GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
-- writel(grxfsiz, hsotg->regs + GRXFSIZ);
-- dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ));
-+ dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ);
-+ dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", dwc2_readl(hsotg->regs + GRXFSIZ));
-
- /* Non-periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
-- readl(hsotg->regs + GNPTXFSIZ));
-+ dwc2_readl(hsotg->regs + GNPTXFSIZ));
- nptxfsiz = params->host_nperio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- nptxfsiz |= params->host_rx_fifo_size <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
-- writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
-+ dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
- dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
-- readl(hsotg->regs + GNPTXFSIZ));
-+ dwc2_readl(hsotg->regs + GNPTXFSIZ));
-
- /* Periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
-- readl(hsotg->regs + HPTXFSIZ));
-+ dwc2_readl(hsotg->regs + HPTXFSIZ));
- hptxfsiz = params->host_perio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- hptxfsiz |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size) <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
-- writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
-+ dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
-- readl(hsotg->regs + HPTXFSIZ));
-+ dwc2_readl(hsotg->regs + HPTXFSIZ));
-
- if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
- hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
-@@ -629,14 +629,14 @@ static void dwc2_config_fifos(struct dwc
- * Global DFIFOCFG calculation for Host mode -
- * include RxFIFO, NPTXFIFO and HPTXFIFO
- */
-- dfifocfg = readl(hsotg->regs + GDFIFOCFG);
-+ dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
- dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
- dfifocfg |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size +
- params->host_perio_tx_fifo_size) <<
- GDFIFOCFG_EPINFOBASE_SHIFT &
- GDFIFOCFG_EPINFOBASE_MASK;
-- writel(dfifocfg, hsotg->regs + GDFIFOCFG);
-+ dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG);
- }
- }
-
-@@ -657,14 +657,14 @@ void dwc2_core_host_init(struct dwc2_hso
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- /* Restart the Phy Clock */
-- writel(0, hsotg->regs + PCGCTL);
-+ dwc2_writel(0, hsotg->regs + PCGCTL);
-
- /* Initialize Host Configuration Register */
- dwc2_init_fs_ls_pclk_sel(hsotg);
- if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_FSLSSUPP;
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
-
- /*
-@@ -673,9 +673,9 @@ void dwc2_core_host_init(struct dwc2_hso
- * and its value must not be changed during runtime.
- */
- if (hsotg->core_params->reload_ctl > 0) {
-- hfir = readl(hsotg->regs + HFIR);
-+ hfir = dwc2_readl(hsotg->regs + HFIR);
- hfir |= HFIR_RLDCTRL;
-- writel(hfir, hsotg->regs + HFIR);
-+ dwc2_writel(hfir, hsotg->regs + HFIR);
- }
-
- if (hsotg->core_params->dma_desc_enable > 0) {
-@@ -691,9 +691,9 @@ void dwc2_core_host_init(struct dwc2_hso
- "falling back to buffer DMA mode.\n");
- hsotg->core_params->dma_desc_enable = 0;
- } else {
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_DESCDMA;
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
- }
-
-@@ -702,18 +702,18 @@ void dwc2_core_host_init(struct dwc2_hso
-
- /* TODO - check this */
- /* Clear Host Set HNP Enable in the OTG Control Register */
-- otgctl = readl(hsotg->regs + GOTGCTL);
-+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
-- writel(otgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- /* Make sure the FIFOs are flushed */
- dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
- dwc2_flush_rx_fifo(hsotg);
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
-- otgctl = readl(hsotg->regs + GOTGCTL);
-+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
-- writel(otgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- if (hsotg->core_params->dma_desc_enable <= 0) {
- int num_channels, i;
-@@ -722,25 +722,25 @@ void dwc2_core_host_init(struct dwc2_hso
- /* Flush out any leftover queued requests */
- num_channels = hsotg->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar &= ~HCCHAR_CHENA;
- hcchar |= HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
-- writel(hcchar, hsotg->regs + HCCHAR(i));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- }
-
- /* Halt all channels to put them into a known state */
- for (i = 0; i < num_channels; i++) {
- int count = 0;
-
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
-- writel(hcchar, hsotg->regs + HCCHAR(i));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
- __func__, i);
- do {
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- if (++count > 1000) {
- dev_err(hsotg->dev,
- "Unable to clear enable on channel %d\n",
-@@ -761,7 +761,7 @@ void dwc2_core_host_init(struct dwc2_hso
- !!(hprt0 & HPRT0_PWR));
- if (!(hprt0 & HPRT0_PWR)) {
- hprt0 |= HPRT0_PWR;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
- }
-
-@@ -841,7 +841,7 @@ static void dwc2_hc_enable_slave_ints(st
- break;
- }
-
-- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
- }
-@@ -878,7 +878,7 @@ static void dwc2_hc_enable_dma_ints(stru
- }
- }
-
-- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
- }
-@@ -899,16 +899,16 @@ static void dwc2_hc_enable_ints(struct d
- }
-
- /* Enable the top level host channel interrupt */
-- intmsk = readl(hsotg->regs + HAINTMSK);
-+ intmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- intmsk |= 1 << chan->hc_num;
-- writel(intmsk, hsotg->regs + HAINTMSK);
-+ dwc2_writel(intmsk, hsotg->regs + HAINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
-
- /* Make sure host channel interrupts are enabled */
-- intmsk = readl(hsotg->regs + GINTMSK);
-+ intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_HCHINT;
-- writel(intmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
- }
-@@ -937,7 +937,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- /* Clear old interrupt conditions for this host channel */
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
-- writel(hcintmsk, hsotg->regs + HCINT(hc_num));
-+ dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num));
-
- /* Enable channel interrupts required for this transfer */
- dwc2_hc_enable_ints(hsotg, chan);
-@@ -954,7 +954,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- hcchar |= HCCHAR_LSPDDEV;
- hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
- hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
-- writel(hcchar, hsotg->regs + HCCHAR(hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
- hc_num, hcchar);
-@@ -1008,7 +1008,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso
- }
- }
-
-- writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
-+ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
- }
-
- /**
-@@ -1060,14 +1060,14 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- dev_vdbg(hsotg->dev, "dequeue/error\n");
-- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the QTD and QH state.
- */
-- writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-+ dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-@@ -1076,7 +1076,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- */
- chan->halt_status = halt_status;
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- if (!(hcchar & HCCHAR_CHENA)) {
- /*
- * The channel is either already halted or it hasn't
-@@ -1104,7 +1104,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- return;
- }
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- /* No need to set the bit in DDMA for disabling the channel */
- /* TODO check it everywhere channel is disabled */
-@@ -1127,7 +1127,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
- chan->ep_type == USB_ENDPOINT_XFER_BULK) {
- dev_vdbg(hsotg->dev, "control/bulk\n");
-- nptxsts = readl(hsotg->regs + GNPTXSTS);
-+ nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
- dev_vdbg(hsotg->dev, "Disabling channel\n");
- hcchar &= ~HCCHAR_CHENA;
-@@ -1135,7 +1135,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- } else {
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "isoc/intr\n");
-- hptxsts = readl(hsotg->regs + HPTXSTS);
-+ hptxsts = dwc2_readl(hsotg->regs + HPTXSTS);
- if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
- hsotg->queuing_high_bandwidth) {
- if (dbg_perio())
-@@ -1148,7 +1148,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
- dev_vdbg(hsotg->dev, "DMA enabled\n");
- }
-
-- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->halt_status = halt_status;
-
- if (hcchar & HCCHAR_CHENA) {
-@@ -1195,10 +1195,10 @@ void dwc2_hc_cleanup(struct dwc2_hsotg *
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions
- */
-- writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
-+ dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
-- writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-+ dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
- }
-
- /**
-@@ -1284,13 +1284,13 @@ static void dwc2_hc_write_packet(struct
- if (((unsigned long)data_buf & 0x3) == 0) {
- /* xfer_buf is DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++)
-- writel(*data_buf, data_fifo);
-+ dwc2_writel(*data_buf, data_fifo);
- } else {
- /* xfer_buf is not DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++) {
- u32 data = data_buf[0] | data_buf[1] << 8 |
- data_buf[2] << 16 | data_buf[3] << 24;
-- writel(data, data_fifo);
-+ dwc2_writel(data, data_fifo);
- }
- }
-
-@@ -1443,7 +1443,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
- hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- TSIZ_SC_MC_PID_MASK;
-- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
- hctsiz, chan->hc_num);
-@@ -1471,7 +1471,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- } else {
- dma_addr = chan->xfer_dma;
- }
-- writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
-+ dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
- (unsigned long)dma_addr, chan->hc_num);
-@@ -1479,13 +1479,13 @@ void dwc2_hc_start_transfer(struct dwc2_
-
- /* Start the split */
- if (chan->do_split) {
-- u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
-+ u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
-
- hcsplt |= HCSPLT_SPLTENA;
-- writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
-+ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
- }
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- HCCHAR_MULTICNT_MASK;
-@@ -1505,7 +1505,7 @@ void dwc2_hc_start_transfer(struct dwc2_
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
-
-- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
-@@ -1564,18 +1564,18 @@ void dwc2_hc_start_transfer_ddma(struct
- dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
- }
-
-- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-
- hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK;
-
- /* Always start from first descriptor */
- hc_dma &= ~HCDMA_CTD_MASK;
-- writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
-+ dwc2_writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n",
- hc_dma, chan->hc_num);
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- HCCHAR_MULTICNT_MASK;
-@@ -1594,7 +1594,7 @@ void dwc2_hc_start_transfer_ddma(struct
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
-
-- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
-@@ -1651,7 +1651,7 @@ int dwc2_hc_continue_transfer(struct dwc
- * transfer completes, the extra requests for the channel will
- * be flushed.
- */
-- u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
- hcchar |= HCCHAR_CHENA;
-@@ -1659,7 +1659,7 @@ int dwc2_hc_continue_transfer(struct dwc
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
- hcchar);
-- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->requests++;
- return 1;
- }
-@@ -1669,7 +1669,7 @@ int dwc2_hc_continue_transfer(struct dwc
- if (chan->xfer_count < chan->xfer_len) {
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
-- u32 hcchar = readl(hsotg->regs +
-+ u32 hcchar = dwc2_readl(hsotg->regs +
- HCCHAR(chan->hc_num));
-
- dwc2_hc_set_even_odd_frame(hsotg, chan,
-@@ -1706,12 +1706,12 @@ void dwc2_hc_do_ping(struct dwc2_hsotg *
-
- hctsiz = TSIZ_DOPNG;
- hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
-- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
-- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- }
-
- /**
-@@ -1730,8 +1730,8 @@ u32 dwc2_calc_frame_interval(struct dwc2
- u32 hprt0;
- int clock = 60; /* default value */
-
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-- hprt0 = readl(hsotg->regs + HPRT0);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
-
- if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
- !(usbcfg & GUSBCFG_PHYIF16))
-@@ -1787,7 +1787,7 @@ void dwc2_read_packet(struct dwc2_hsotg
- dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
-
- for (i = 0; i < word_count; i++, data_buf++)
-- *data_buf = readl(fifo);
-+ *data_buf = dwc2_readl(fifo);
- }
-
- /**
-@@ -1807,56 +1807,56 @@ void dwc2_dump_host_registers(struct dwc
- dev_dbg(hsotg->dev, "Host Global Registers\n");
- addr = hsotg->regs + HCFG;
- dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HFIR;
- dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HFNUM;
- dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HPTXSTS;
- dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HAINT;
- dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HAINTMSK;
- dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- if (hsotg->core_params->dma_desc_enable > 0) {
- addr = hsotg->regs + HFLBADDR;
- dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- }
-
- addr = hsotg->regs + HPRT0;
- dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
-
- for (i = 0; i < hsotg->core_params->host_channels; i++) {
- dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
- addr = hsotg->regs + HCCHAR(i);
- dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HCSPLT(i);
- dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HCINT(i);
- dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HCINTMSK(i);
- dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HCTSIZ(i);
- dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HCDMA(i);
- dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- if (hsotg->core_params->dma_desc_enable > 0) {
- addr = hsotg->regs + HCDMAB(i);
- dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- }
- }
- #endif
-@@ -1878,80 +1878,80 @@ void dwc2_dump_global_registers(struct d
- dev_dbg(hsotg->dev, "Core Global Registers\n");
- addr = hsotg->regs + GOTGCTL;
- dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GOTGINT;
- dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GAHBCFG;
- dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GUSBCFG;
- dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GRSTCTL;
- dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GINTSTS;
- dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GINTMSK;
- dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GRXSTSR;
- dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GRXFSIZ;
- dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GNPTXFSIZ;
- dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GNPTXSTS;
- dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GI2CCTL;
- dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GPVNDCTL;
- dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GGPIO;
- dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GUID;
- dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GSNPSID;
- dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GHWCFG1;
- dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GHWCFG2;
- dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GHWCFG3;
- dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GHWCFG4;
- dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GLPMCFG;
- dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GPWRDN;
- dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + GDFIFOCFG;
- dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- addr = hsotg->regs + HPTXFSIZ;
- dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
-
- addr = hsotg->regs + PCGCTL;
- dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n",
-- (unsigned long)addr, readl(addr));
-+ (unsigned long)addr, dwc2_readl(addr));
- #endif
- }
-
-@@ -1970,15 +1970,15 @@ void dwc2_flush_tx_fifo(struct dwc2_hsot
-
- greset = GRSTCTL_TXFFLSH;
- greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
-- writel(greset, hsotg->regs + GRSTCTL);
-+ dwc2_writel(greset, hsotg->regs + GRSTCTL);
-
- do {
-- greset = readl(hsotg->regs + GRSTCTL);
-+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 10000) {
- dev_warn(hsotg->dev,
- "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
- __func__, greset,
-- readl(hsotg->regs + GNPTXSTS));
-+ dwc2_readl(hsotg->regs + GNPTXSTS));
- break;
- }
- udelay(1);
-@@ -2001,10 +2001,10 @@ void dwc2_flush_rx_fifo(struct dwc2_hsot
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- greset = GRSTCTL_RXFFLSH;
-- writel(greset, hsotg->regs + GRSTCTL);
-+ dwc2_writel(greset, hsotg->regs + GRSTCTL);
-
- do {
-- greset = readl(hsotg->regs + GRSTCTL);
-+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 10000) {
- dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n",
- __func__, greset);
-@@ -2666,7 +2666,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3",
- * as in "OTG version 2.xx" or "OTG version 3.xx".
- */
-- hw->snpsid = readl(hsotg->regs + GSNPSID);
-+ hw->snpsid = dwc2_readl(hsotg->regs + GSNPSID);
- if ((hw->snpsid & 0xfffff000) != 0x4f542000 &&
- (hw->snpsid & 0xfffff000) != 0x4f543000) {
- dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
-@@ -2678,11 +2678,11 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
- hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
-
-- hwcfg1 = readl(hsotg->regs + GHWCFG1);
-- hwcfg2 = readl(hsotg->regs + GHWCFG2);
-- hwcfg3 = readl(hsotg->regs + GHWCFG3);
-- hwcfg4 = readl(hsotg->regs + GHWCFG4);
-- grxfsiz = readl(hsotg->regs + GRXFSIZ);
-+ hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
-+ hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
-+ hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
-+ hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
-+ grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
-
- dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1);
- dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2);
-@@ -2691,18 +2691,18 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
-
- /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
-- gusbcfg = readl(hsotg->regs + GUSBCFG);
-+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg |= GUSBCFG_FORCEHOSTMODE;
-- writel(gusbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- usleep_range(100000, 150000);
-
-- gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ);
-- hptxfsiz = readl(hsotg->regs + HPTXFSIZ);
-+ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
-+ hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
- dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
-- gusbcfg = readl(hsotg->regs + GUSBCFG);
-+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
-- writel(gusbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- usleep_range(100000, 150000);
-
- /* hwcfg2 */
-@@ -2821,7 +2821,7 @@ u16 dwc2_get_otg_version(struct dwc2_hso
-
- bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
- {
-- if (readl(hsotg->regs + GSNPSID) == 0xffffffff)
-+ if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff)
- return false;
- else
- return true;
-@@ -2835,10 +2835,10 @@ bool dwc2_is_controller_alive(struct dwc
- */
- void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
- {
-- u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- ahbcfg |= GAHBCFG_GLBL_INTR_EN;
-- writel(ahbcfg, hsotg->regs + GAHBCFG);
-+ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
- }
-
- /**
-@@ -2849,10 +2849,10 @@ void dwc2_enable_global_interrupts(struc
- */
- void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
- {
-- u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
-+ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
-- writel(ahbcfg, hsotg->regs + GAHBCFG);
-+ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
- }
-
- MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
---- a/drivers/usb/dwc2/core.h
-+++ b/drivers/usb/dwc2/core.h
-@@ -44,16 +44,28 @@
- #include <linux/usb/phy.h>
- #include "hw.h"
-
--#ifdef DWC2_LOG_WRITES
--static inline void do_write(u32 value, void *addr)
-+static inline u32 dwc2_readl(const void __iomem *addr)
- {
-- writel(value, addr);
-- pr_info("INFO:: wrote %08x to %p\n", value, addr);
-+ u32 value = __raw_readl(addr);
-+
-+ /* In order to preserve endianness __raw_* operation is used. Therefore
-+ a barrier is needed to ensure IO access is not re-ordered across
-+ reads or writes */
-+ mb();
-+ return value;
- }
-
--#undef writel
--#define writel(v, a) do_write(v, a)
-+static inline void dwc2_writel(u32 value, void __iomem *addr)
-+{
-+ __raw_writel(value, addr);
-+ /* In order to preserve endianness __raw_* operation is used. Therefore
-+ a barrier is needed to ensure IO access is not re-ordered across
-+ reads or writes */
-+ mb();
-+#ifdef DWC2_LOG_WRITES
-+ pr_info("INFO:: wrote %08x to %p\n", value, addr);
- #endif
-+}
-
- /* Maximum number of Endpoints/HostChannels */
- #define MAX_EPS_CHANNELS 16
---- a/drivers/usb/dwc2/core_intr.c
-+++ b/drivers/usb/dwc2/core_intr.c
-@@ -80,15 +80,15 @@ static const char *dwc2_op_state_str(str
- */
- static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
- {
-- u32 hprt0 = readl(hsotg->regs + HPRT0);
-+ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
-
- if (hprt0 & HPRT0_ENACHG) {
- hprt0 &= ~HPRT0_ENA;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
-
- /* Clear interrupt */
-- writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
- }
-
- /**
-@@ -102,7 +102,7 @@ static void dwc2_handle_mode_mismatch_in
- dwc2_is_host_mode(hsotg) ? "Host" : "Device");
-
- /* Clear interrupt */
-- writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
- }
-
- /**
-@@ -117,8 +117,8 @@ static void dwc2_handle_otg_intr(struct
- u32 gotgctl;
- u32 gintmsk;
-
-- gotgint = readl(hsotg->regs + GOTGINT);
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgint = dwc2_readl(hsotg->regs + GOTGINT);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
- dwc2_op_state_str(hsotg));
-
-@@ -126,7 +126,7 @@ static void dwc2_handle_otg_intr(struct
- dev_dbg(hsotg->dev,
- " ++OTG Interrupt: Session End Detected++ (%s)\n",
- dwc2_op_state_str(hsotg));
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
-
- if (dwc2_is_device_mode(hsotg))
- s3c_hsotg_disconnect(hsotg);
-@@ -152,15 +152,15 @@ static void dwc2_handle_otg_intr(struct
- hsotg->lx_state = DWC2_L0;
- }
-
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- gotgctl &= ~GOTGCTL_DEVHNPEN;
-- writel(gotgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- }
-
- if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
- dev_dbg(hsotg->dev,
- " ++OTG Interrupt: Session Request Success Status Change++\n");
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- if (gotgctl & GOTGCTL_SESREQSCS) {
- if (hsotg->core_params->phy_type ==
- DWC2_PHY_TYPE_PARAM_FS
-@@ -168,9 +168,9 @@ static void dwc2_handle_otg_intr(struct
- hsotg->srp_success = 1;
- } else {
- /* Clear Session Request */
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- gotgctl &= ~GOTGCTL_SESREQ;
-- writel(gotgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- }
- }
- }
-@@ -180,7 +180,7 @@ static void dwc2_handle_otg_intr(struct
- * Print statements during the HNP interrupt handling
- * can cause it to fail
- */
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- /*
- * WA for 3.00a- HW is not setting cur_mode, even sometimes
- * this does not help
-@@ -200,9 +200,9 @@ static void dwc2_handle_otg_intr(struct
- * interrupt does not get handled and Linux
- * complains loudly.
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk &= ~GINTSTS_SOF;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
-
- /*
- * Call callback function with spin lock
-@@ -216,9 +216,9 @@ static void dwc2_handle_otg_intr(struct
- hsotg->op_state = OTG_STATE_B_HOST;
- }
- } else {
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
-- writel(gotgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "HNP Failed\n");
- dev_err(hsotg->dev,
- "Device Not Connected/Responding\n");
-@@ -244,9 +244,9 @@ static void dwc2_handle_otg_intr(struct
- hsotg->op_state = OTG_STATE_A_PERIPHERAL;
- } else {
- /* Need to disable SOF interrupt immediately */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk &= ~GINTSTS_SOF;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- spin_unlock(&hsotg->lock);
- dwc2_hcd_start(hsotg);
- spin_lock(&hsotg->lock);
-@@ -261,7 +261,7 @@ static void dwc2_handle_otg_intr(struct
- dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
-
- /* Clear GOTGINT */
-- writel(gotgint, hsotg->regs + GOTGINT);
-+ dwc2_writel(gotgint, hsotg->regs + GOTGINT);
- }
-
- /**
-@@ -276,11 +276,11 @@ static void dwc2_handle_otg_intr(struct
- */
- static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
- {
-- u32 gintmsk = readl(hsotg->regs + GINTMSK);
-+ u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- /* Need to disable SOF interrupt immediately */
- gintmsk &= ~GINTSTS_SOF;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
-
- dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n",
- dwc2_is_host_mode(hsotg) ? "Host" : "Device");
-@@ -297,7 +297,7 @@ static void dwc2_handle_conn_id_status_c
- }
-
- /* Clear interrupt */
-- writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
- }
-
- /**
-@@ -316,7 +316,7 @@ static void dwc2_handle_session_req_intr
- dev_dbg(hsotg->dev, "++Session Request Interrupt++\n");
-
- /* Clear interrupt */
-- writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
-
- /*
- * Report disconnect if there is any previous session established
-@@ -338,23 +338,23 @@ static void dwc2_handle_wakeup_detected_
- dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
-
- if (dwc2_is_device_mode(hsotg)) {
-- dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS));
-+ dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dwc2_readl(hsotg->regs + DSTS));
- if (hsotg->lx_state == DWC2_L2) {
-- u32 dctl = readl(hsotg->regs + DCTL);
-+ u32 dctl = dwc2_readl(hsotg->regs + DCTL);
-
- /* Clear Remote Wakeup Signaling */
- dctl &= ~DCTL_RMTWKUPSIG;
-- writel(dctl, hsotg->regs + DCTL);
-+ dwc2_writel(dctl, hsotg->regs + DCTL);
- }
- /* Change to L0 state */
- hsotg->lx_state = DWC2_L0;
- } else {
- if (hsotg->lx_state != DWC2_L1) {
-- u32 pcgcctl = readl(hsotg->regs + PCGCTL);
-+ u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
-
- /* Restart the Phy Clock */
- pcgcctl &= ~PCGCTL_STOPPCLK;
-- writel(pcgcctl, hsotg->regs + PCGCTL);
-+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- mod_timer(&hsotg->wkp_timer,
- jiffies + msecs_to_jiffies(71));
- } else {
-@@ -364,7 +364,7 @@ static void dwc2_handle_wakeup_detected_
- }
-
- /* Clear interrupt */
-- writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
- }
-
- /*
-@@ -383,7 +383,7 @@ static void dwc2_handle_disconnect_intr(
- /* Change to L3 (OFF) state */
- hsotg->lx_state = DWC2_L3;
-
-- writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
- }
-
- /*
-@@ -405,7 +405,7 @@ static void dwc2_handle_usb_suspend_intr
- * Check the Device status register to determine if the Suspend
- * state is active
- */
-- dsts = readl(hsotg->regs + DSTS);
-+ dsts = dwc2_readl(hsotg->regs + DSTS);
- dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts);
- dev_dbg(hsotg->dev,
- "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n",
-@@ -427,7 +427,7 @@ static void dwc2_handle_usb_suspend_intr
- hsotg->lx_state = DWC2_L2;
-
- /* Clear interrupt */
-- writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
- }
-
- #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
-@@ -445,9 +445,9 @@ static u32 dwc2_read_common_intr(struct
- u32 gahbcfg;
- u32 gintmsk_common = GINTMSK_COMMON;
-
-- gintsts = readl(hsotg->regs + GINTSTS);
-- gintmsk = readl(hsotg->regs + GINTMSK);
-- gahbcfg = readl(hsotg->regs + GAHBCFG);
-+ gintsts = dwc2_readl(hsotg->regs + GINTSTS);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
-+ gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- /* If any common interrupts set */
- if (gintsts & gintmsk_common)
---- a/drivers/usb/dwc2/gadget.c
-+++ b/drivers/usb/dwc2/gadget.c
-@@ -58,12 +58,12 @@ static inline struct dwc2_hsotg *to_hsot
-
- static inline void __orr32(void __iomem *ptr, u32 val)
- {
-- writel(readl(ptr) | val, ptr);
-+ dwc2_writel(dwc2_readl(ptr) | val, ptr);
- }
-
- static inline void __bic32(void __iomem *ptr, u32 val)
- {
-- writel(readl(ptr) & ~val, ptr);
-+ dwc2_writel(dwc2_readl(ptr) & ~val, ptr);
- }
-
- static inline struct s3c_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg,
-@@ -109,14 +109,14 @@ static inline bool using_dma(struct dwc2
- */
- static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
- {
-- u32 gsintmsk = readl(hsotg->regs + GINTMSK);
-+ u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- u32 new_gsintmsk;
-
- new_gsintmsk = gsintmsk | ints;
-
- if (new_gsintmsk != gsintmsk) {
- dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
-- writel(new_gsintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
- }
- }
-
-@@ -127,13 +127,13 @@ static void s3c_hsotg_en_gsint(struct dw
- */
- static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
- {
-- u32 gsintmsk = readl(hsotg->regs + GINTMSK);
-+ u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- u32 new_gsintmsk;
-
- new_gsintmsk = gsintmsk & ~ints;
-
- if (new_gsintmsk != gsintmsk)
-- writel(new_gsintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
- }
-
- /**
-@@ -158,12 +158,12 @@ static void s3c_hsotg_ctrl_epint(struct
- bit <<= 16;
-
- local_irq_save(flags);
-- daint = readl(hsotg->regs + DAINTMSK);
-+ daint = dwc2_readl(hsotg->regs + DAINTMSK);
- if (en)
- daint |= bit;
- else
- daint &= ~bit;
-- writel(daint, hsotg->regs + DAINTMSK);
-+ dwc2_writel(daint, hsotg->regs + DAINTMSK);
- local_irq_restore(flags);
- }
-
-@@ -183,8 +183,8 @@ static void s3c_hsotg_init_fifo(struct d
- hsotg->fifo_map = 0;
-
- /* set RX/NPTX FIFO sizes */
-- writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ);
-- writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) |
-+ dwc2_writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ);
-+ dwc2_writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) |
- (hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT),
- hsotg->regs + GNPTXFSIZ);
-
-@@ -212,7 +212,7 @@ static void s3c_hsotg_init_fifo(struct d
- "insufficient fifo memory");
- addr += hsotg->g_tx_fifo_sz[ep];
-
-- writel(val, hsotg->regs + DPTXFSIZN(ep));
-+ dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
- }
-
- /*
-@@ -220,13 +220,13 @@ static void s3c_hsotg_init_fifo(struct d
- * all fifos are flushed before continuing
- */
-
-- writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
-+ dwc2_writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
- GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL);
-
- /* wait until the fifos are both flushed */
- timeout = 100;
- while (1) {
-- val = readl(hsotg->regs + GRSTCTL);
-+ val = dwc2_readl(hsotg->regs + GRSTCTL);
-
- if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0)
- break;
-@@ -319,7 +319,7 @@ static int s3c_hsotg_write_fifo(struct d
- struct s3c_hsotg_req *hs_req)
- {
- bool periodic = is_ep_periodic(hs_ep);
-- u32 gnptxsts = readl(hsotg->regs + GNPTXSTS);
-+ u32 gnptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- int buf_pos = hs_req->req.actual;
- int to_write = hs_ep->size_loaded;
- void *data;
-@@ -334,7 +334,7 @@ static int s3c_hsotg_write_fifo(struct d
- return 0;
-
- if (periodic && !hsotg->dedicated_fifos) {
-- u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
-+ u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
- int size_left;
- int size_done;
-
-@@ -375,7 +375,7 @@ static int s3c_hsotg_write_fifo(struct d
- return -ENOSPC;
- }
- } else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
-- can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index));
-+ can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index));
-
- can_write &= 0xffff;
- can_write *= 4;
-@@ -552,11 +552,11 @@ static void s3c_hsotg_start_req(struct d
- epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
-
- dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
-- __func__, readl(hsotg->regs + epctrl_reg), index,
-+ __func__, dwc2_readl(hsotg->regs + epctrl_reg), index,
- hs_ep->dir_in ? "in" : "out");
-
- /* If endpoint is stalled, we will restart request later */
-- ctrl = readl(hsotg->regs + epctrl_reg);
-+ ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
-
- if (ctrl & DXEPCTL_STALL) {
- dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
-@@ -620,7 +620,7 @@ static void s3c_hsotg_start_req(struct d
- hs_ep->req = hs_req;
-
- /* write size / packets */
-- writel(epsize, hsotg->regs + epsize_reg);
-+ dwc2_writel(epsize, hsotg->regs + epsize_reg);
-
- if (using_dma(hsotg) && !continuing) {
- unsigned int dma_reg;
-@@ -631,7 +631,7 @@ static void s3c_hsotg_start_req(struct d
- */
-
- dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
-- writel(ureq->dma, hsotg->regs + dma_reg);
-+ dwc2_writel(ureq->dma, hsotg->regs + dma_reg);
-
- dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n",
- __func__, &ureq->dma, dma_reg);
-@@ -647,7 +647,7 @@ static void s3c_hsotg_start_req(struct d
- ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */
-
- dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
-- writel(ctrl, hsotg->regs + epctrl_reg);
-+ dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
-
- /*
- * set these, it seems that DMA support increments past the end
-@@ -669,7 +669,7 @@ static void s3c_hsotg_start_req(struct d
- * to debugging to see what is going on.
- */
- if (dir_in)
-- writel(DIEPMSK_INTKNTXFEMPMSK,
-+ dwc2_writel(DIEPMSK_INTKNTXFEMPMSK,
- hsotg->regs + DIEPINT(index));
-
- /*
-@@ -678,13 +678,13 @@ static void s3c_hsotg_start_req(struct d
- */
-
- /* check ep is enabled */
-- if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
-+ if (!(dwc2_readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
- dev_dbg(hsotg->dev,
- "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n",
-- index, readl(hsotg->regs + epctrl_reg));
-+ index, dwc2_readl(hsotg->regs + epctrl_reg));
-
- dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n",
-- __func__, readl(hsotg->regs + epctrl_reg));
-+ __func__, dwc2_readl(hsotg->regs + epctrl_reg));
-
- /* enable ep interrupts */
- s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
-@@ -896,7 +896,7 @@ static struct s3c_hsotg_ep *ep_from_wind
- */
- static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
- {
-- int dctl = readl(hsotg->regs + DCTL);
-+ int dctl = dwc2_readl(hsotg->regs + DCTL);
-
- dctl &= ~DCTL_TSTCTL_MASK;
- switch (testmode) {
-@@ -910,7 +910,7 @@ static int s3c_hsotg_set_test_mode(struc
- default:
- return -EINVAL;
- }
-- writel(dctl, hsotg->regs + DCTL);
-+ dwc2_writel(dctl, hsotg->regs + DCTL);
- return 0;
- }
-
-@@ -1169,14 +1169,14 @@ static void s3c_hsotg_stall_ep0(struct d
- * taken effect, so no need to clear later.
- */
-
-- ctrl = readl(hsotg->regs + reg);
-+ ctrl = dwc2_readl(hsotg->regs + reg);
- ctrl |= DXEPCTL_STALL;
- ctrl |= DXEPCTL_CNAK;
-- writel(ctrl, hsotg->regs + reg);
-+ dwc2_writel(ctrl, hsotg->regs + reg);
-
- dev_dbg(hsotg->dev,
- "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n",
-- ctrl, reg, readl(hsotg->regs + reg));
-+ ctrl, reg, dwc2_readl(hsotg->regs + reg));
-
- /*
- * complete won't be called, so we enqueue
-@@ -1220,11 +1220,11 @@ static void s3c_hsotg_process_control(st
- switch (ctrl->bRequest) {
- case USB_REQ_SET_ADDRESS:
- hsotg->connected = 1;
-- dcfg = readl(hsotg->regs + DCFG);
-+ dcfg = dwc2_readl(hsotg->regs + DCFG);
- dcfg &= ~DCFG_DEVADDR_MASK;
- dcfg |= (le16_to_cpu(ctrl->wValue) <<
- DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK;
-- writel(dcfg, hsotg->regs + DCFG);
-+ dwc2_writel(dcfg, hsotg->regs + DCFG);
-
- dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
-
-@@ -1342,15 +1342,15 @@ static void s3c_hsotg_program_zlp(struct
- dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
- index);
-
-- writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
-+ dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
- DXEPTSIZ_XFERSIZE(0), hsotg->regs +
- epsiz_reg);
-
-- ctrl = readl(hsotg->regs + epctl_reg);
-+ ctrl = dwc2_readl(hsotg->regs + epctl_reg);
- ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */
- ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
- ctrl |= DXEPCTL_USBACTEP;
-- writel(ctrl, hsotg->regs + epctl_reg);
-+ dwc2_writel(ctrl, hsotg->regs + epctl_reg);
- }
-
- /**
-@@ -1444,7 +1444,7 @@ static void s3c_hsotg_rx_data(struct dwc
-
-
- if (!hs_req) {
-- u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
-+ u32 epctl = dwc2_readl(hsotg->regs + DOEPCTL(ep_idx));
- int ptr;
-
- dev_dbg(hsotg->dev,
-@@ -1453,7 +1453,7 @@ static void s3c_hsotg_rx_data(struct dwc
-
- /* dump the data from the FIFO, we've nothing we can do */
- for (ptr = 0; ptr < size; ptr += 4)
-- (void)readl(fifo);
-+ (void)dwc2_readl(fifo);
-
- return;
- }
-@@ -1518,7 +1518,7 @@ static void s3c_hsotg_ep0_zlp(struct dwc
- */
- static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
- {
-- u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
-+ u32 epsize = dwc2_readl(hsotg->regs + DOEPTSIZ(epnum));
- struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[epnum];
- struct s3c_hsotg_req *hs_req = hs_ep->req;
- struct usb_request *req = &hs_req->req;
-@@ -1590,7 +1590,7 @@ static u32 s3c_hsotg_read_frameno(struct
- {
- u32 dsts;
-
-- dsts = readl(hsotg->regs + DSTS);
-+ dsts = dwc2_readl(hsotg->regs + DSTS);
- dsts &= DSTS_SOFFN_MASK;
- dsts >>= DSTS_SOFFN_SHIFT;
-
-@@ -1615,7 +1615,7 @@ static u32 s3c_hsotg_read_frameno(struct
- */
- static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
- {
-- u32 grxstsr = readl(hsotg->regs + GRXSTSP);
-+ u32 grxstsr = dwc2_readl(hsotg->regs + GRXSTSP);
- u32 epnum, status, size;
-
- WARN_ON(using_dma(hsotg));
-@@ -1646,7 +1646,7 @@ static void s3c_hsotg_handle_rx(struct d
- dev_dbg(hsotg->dev,
- "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
- s3c_hsotg_read_frameno(hsotg),
-- readl(hsotg->regs + DOEPCTL(0)));
-+ dwc2_readl(hsotg->regs + DOEPCTL(0)));
- /*
- * Call s3c_hsotg_handle_outdone here if it was not called from
- * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't
-@@ -1664,7 +1664,7 @@ static void s3c_hsotg_handle_rx(struct d
- dev_dbg(hsotg->dev,
- "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
- s3c_hsotg_read_frameno(hsotg),
-- readl(hsotg->regs + DOEPCTL(0)));
-+ dwc2_readl(hsotg->regs + DOEPCTL(0)));
-
- WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP);
-
-@@ -1743,15 +1743,15 @@ static void s3c_hsotg_set_ep_maxpacket(s
- }
-
- if (dir_in) {
-- reg = readl(regs + DIEPCTL(ep));
-+ reg = dwc2_readl(regs + DIEPCTL(ep));
- reg &= ~DXEPCTL_MPS_MASK;
- reg |= mpsval;
-- writel(reg, regs + DIEPCTL(ep));
-+ dwc2_writel(reg, regs + DIEPCTL(ep));
- } else {
-- reg = readl(regs + DOEPCTL(ep));
-+ reg = dwc2_readl(regs + DOEPCTL(ep));
- reg &= ~DXEPCTL_MPS_MASK;
- reg |= mpsval;
-- writel(reg, regs + DOEPCTL(ep));
-+ dwc2_writel(reg, regs + DOEPCTL(ep));
- }
-
- return;
-@@ -1770,14 +1770,14 @@ static void s3c_hsotg_txfifo_flush(struc
- int timeout;
- int val;
-
-- writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
-+ dwc2_writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
- hsotg->regs + GRSTCTL);
-
- /* wait until the fifo is flushed */
- timeout = 100;
-
- while (1) {
-- val = readl(hsotg->regs + GRSTCTL);
-+ val = dwc2_readl(hsotg->regs + GRSTCTL);
-
- if ((val & (GRSTCTL_TXFFLSH)) == 0)
- break;
-@@ -1838,7 +1838,7 @@ static void s3c_hsotg_complete_in(struct
- struct s3c_hsotg_ep *hs_ep)
- {
- struct s3c_hsotg_req *hs_req = hs_ep->req;
-- u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
-+ u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
- int size_left, size_done;
-
- if (!hs_req) {
-@@ -1929,11 +1929,11 @@ static void s3c_hsotg_epint(struct dwc2_
- u32 ints;
- u32 ctrl;
-
-- ints = readl(hsotg->regs + epint_reg);
-- ctrl = readl(hsotg->regs + epctl_reg);
-+ ints = dwc2_readl(hsotg->regs + epint_reg);
-+ ctrl = dwc2_readl(hsotg->regs + epctl_reg);
-
- /* Clear endpoint interrupts */
-- writel(ints, hsotg->regs + epint_reg);
-+ dwc2_writel(ints, hsotg->regs + epint_reg);
-
- if (!hs_ep) {
- dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n",
-@@ -1954,13 +1954,13 @@ static void s3c_hsotg_epint(struct dwc2_
- ctrl |= DXEPCTL_SETEVENFR;
- else
- ctrl |= DXEPCTL_SETODDFR;
-- writel(ctrl, hsotg->regs + epctl_reg);
-+ dwc2_writel(ctrl, hsotg->regs + epctl_reg);
- }
-
- dev_dbg(hsotg->dev,
- "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
-- __func__, readl(hsotg->regs + epctl_reg),
-- readl(hsotg->regs + epsiz_reg));
-+ __func__, dwc2_readl(hsotg->regs + epctl_reg),
-+ dwc2_readl(hsotg->regs + epsiz_reg));
-
- /*
- * we get OutDone from the FIFO, so we only need to look
-@@ -1985,16 +1985,16 @@ static void s3c_hsotg_epint(struct dwc2_
- dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
-
- if (dir_in) {
-- int epctl = readl(hsotg->regs + epctl_reg);
-+ int epctl = dwc2_readl(hsotg->regs + epctl_reg);
-
- s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
-
- if ((epctl & DXEPCTL_STALL) &&
- (epctl & DXEPCTL_EPTYPE_BULK)) {
-- int dctl = readl(hsotg->regs + DCTL);
-+ int dctl = dwc2_readl(hsotg->regs + DCTL);
-
- dctl |= DCTL_CGNPINNAK;
-- writel(dctl, hsotg->regs + DCTL);
-+ dwc2_writel(dctl, hsotg->regs + DCTL);
- }
- }
- }
-@@ -2056,7 +2056,7 @@ static void s3c_hsotg_epint(struct dwc2_
- */
- static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
- {
-- u32 dsts = readl(hsotg->regs + DSTS);
-+ u32 dsts = dwc2_readl(hsotg->regs + DSTS);
- int ep0_mps = 0, ep_mps = 8;
-
- /*
-@@ -2123,8 +2123,8 @@ static void s3c_hsotg_irq_enumdone(struc
- s3c_hsotg_enqueue_setup(hsotg);
-
- dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-- readl(hsotg->regs + DIEPCTL0),
-- readl(hsotg->regs + DOEPCTL0));
-+ dwc2_readl(hsotg->regs + DIEPCTL0),
-+ dwc2_readl(hsotg->regs + DOEPCTL0));
- }
-
- /**
-@@ -2151,7 +2151,7 @@ static void kill_all_requests(struct dwc
-
- if (!hsotg->dedicated_fifos)
- return;
-- size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
-+ size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
- if (size < ep->fifo_size)
- s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index);
- }
-@@ -2236,11 +2236,11 @@ static int s3c_hsotg_corereset(struct dw
- dev_dbg(hsotg->dev, "resetting core\n");
-
- /* issue soft reset */
-- writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
-+ dwc2_writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
-
- timeout = 10000;
- do {
-- grstctl = readl(hsotg->regs + GRSTCTL);
-+ grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
- } while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0);
-
- if (grstctl & GRSTCTL_CSFTRST) {
-@@ -2251,7 +2251,7 @@ static int s3c_hsotg_corereset(struct dw
- timeout = 10000;
-
- while (1) {
-- u32 grstctl = readl(hsotg->regs + GRSTCTL);
-+ u32 grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
-
- if (timeout-- < 0) {
- dev_info(hsotg->dev,
-@@ -2291,7 +2291,7 @@ void s3c_hsotg_core_init_disconnected(st
-
- /* set the PLL on, remove the HNP/SRP and set the PHY */
- val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
-- writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
-+ dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
- (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
-
- s3c_hsotg_init_fifo(hsotg);
-@@ -2299,15 +2299,15 @@ void s3c_hsotg_core_init_disconnected(st
- if (!is_usb_reset)
- __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
-
-- writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG);
-+ dwc2_writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG);
-
- /* Clear any pending OTG interrupts */
-- writel(0xffffffff, hsotg->regs + GOTGINT);
-+ dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
-
- /* Clear any pending interrupts */
-- writel(0xffffffff, hsotg->regs + GINTSTS);
-+ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
-
-- writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
-+ dwc2_writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
- GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
- GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST |
- GINTSTS_ENUMDONE | GINTSTS_OTGINT |
-@@ -2315,11 +2315,11 @@ void s3c_hsotg_core_init_disconnected(st
- hsotg->regs + GINTMSK);
-
- if (using_dma(hsotg))
-- writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
-+ dwc2_writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
- (GAHBCFG_HBSTLEN_INCR4 << GAHBCFG_HBSTLEN_SHIFT),
- hsotg->regs + GAHBCFG);
- else
-- writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL |
-+ dwc2_writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL |
- GAHBCFG_P_TXF_EMP_LVL) : 0) |
- GAHBCFG_GLBL_INTR_EN,
- hsotg->regs + GAHBCFG);
-@@ -2330,7 +2330,7 @@ void s3c_hsotg_core_init_disconnected(st
- * interrupts.
- */
-
-- writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
-+ dwc2_writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
- DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
- DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
- DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-@@ -2341,17 +2341,17 @@ void s3c_hsotg_core_init_disconnected(st
- * don't need XferCompl, we get that from RXFIFO in slave mode. In
- * DMA mode we may need this.
- */
-- writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
-+ dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
- DIEPMSK_TIMEOUTMSK) : 0) |
- DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
- DOEPMSK_SETUPMSK,
- hsotg->regs + DOEPMSK);
-
-- writel(0, hsotg->regs + DAINTMSK);
-+ dwc2_writel(0, hsotg->regs + DAINTMSK);
-
- dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-- readl(hsotg->regs + DIEPCTL0),
-- readl(hsotg->regs + DOEPCTL0));
-+ dwc2_readl(hsotg->regs + DIEPCTL0),
-+ dwc2_readl(hsotg->regs + DOEPCTL0));
-
- /* enable in and out endpoint interrupts */
- s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT);
-@@ -2374,7 +2374,7 @@ void s3c_hsotg_core_init_disconnected(st
- __bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
- }
-
-- dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL));
-+ dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg->regs + DCTL));
-
- /*
- * DxEPCTL_USBActEp says RO in manual, but seems to be set by
-@@ -2382,23 +2382,23 @@ void s3c_hsotg_core_init_disconnected(st
- */
-
- /* set to read 1 8byte packet */
-- writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
-+ dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
- DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0);
-
-- writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
-+ dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
- DXEPCTL_CNAK | DXEPCTL_EPENA |
- DXEPCTL_USBACTEP,
- hsotg->regs + DOEPCTL0);
-
- /* enable, but don't activate EP0in */
-- writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
-+ dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
- DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
-
- s3c_hsotg_enqueue_setup(hsotg);
-
- dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-- readl(hsotg->regs + DIEPCTL0),
-- readl(hsotg->regs + DOEPCTL0));
-+ dwc2_readl(hsotg->regs + DIEPCTL0),
-+ dwc2_readl(hsotg->regs + DOEPCTL0));
-
- /* clear global NAKs */
- val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
-@@ -2438,8 +2438,8 @@ static irqreturn_t s3c_hsotg_irq(int irq
-
- spin_lock(&hsotg->lock);
- irq_retry:
-- gintsts = readl(hsotg->regs + GINTSTS);
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintsts = dwc2_readl(hsotg->regs + GINTSTS);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
- __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
-@@ -2447,14 +2447,14 @@ irq_retry:
- gintsts &= gintmsk;
-
- if (gintsts & GINTSTS_ENUMDONE) {
-- writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
-
- s3c_hsotg_irq_enumdone(hsotg);
- }
-
- if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
-- u32 daint = readl(hsotg->regs + DAINT);
-- u32 daintmsk = readl(hsotg->regs + DAINTMSK);
-+ u32 daint = dwc2_readl(hsotg->regs + DAINT);
-+ u32 daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
- u32 daint_out, daint_in;
- int ep;
-
-@@ -2479,13 +2479,13 @@ irq_retry:
-
- if (gintsts & GINTSTS_USBRST) {
-
-- u32 usb_status = readl(hsotg->regs + GOTGCTL);
-+ u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL);
-
- dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
- dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
-- readl(hsotg->regs + GNPTXSTS));
-+ dwc2_readl(hsotg->regs + GNPTXSTS));
-
-- writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
-
- /* Report disconnection if it is not already done. */
- s3c_hsotg_disconnect(hsotg);
-@@ -2538,7 +2538,7 @@ irq_retry:
-
- if (gintsts & GINTSTS_ERLYSUSP) {
- dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
-- writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
- }
-
- /*
-@@ -2550,7 +2550,7 @@ irq_retry:
- if (gintsts & GINTSTS_GOUTNAKEFF) {
- dev_info(hsotg->dev, "GOUTNakEff triggered\n");
-
-- writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
-+ dwc2_writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
-
- s3c_hsotg_dump(hsotg);
- }
-@@ -2558,7 +2558,7 @@ irq_retry:
- if (gintsts & GINTSTS_GINNAKEFF) {
- dev_info(hsotg->dev, "GINNakEff triggered\n");
-
-- writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
-+ dwc2_writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
-
- s3c_hsotg_dump(hsotg);
- }
-@@ -2616,7 +2616,7 @@ static int s3c_hsotg_ep_enable(struct us
- /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
-
- epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
-- epctrl = readl(hsotg->regs + epctrl_reg);
-+ epctrl = dwc2_readl(hsotg->regs + epctrl_reg);
-
- dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
- __func__, epctrl, epctrl_reg);
-@@ -2700,7 +2700,7 @@ static int s3c_hsotg_ep_enable(struct us
- for (i = 1; i < hsotg->num_of_eps; ++i) {
- if (hsotg->fifo_map & (1<<i))
- continue;
-- val = readl(hsotg->regs + DPTXFSIZN(i));
-+ val = dwc2_readl(hsotg->regs + DPTXFSIZN(i));
- val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
- if (val < size)
- continue;
-@@ -2729,9 +2729,9 @@ static int s3c_hsotg_ep_enable(struct us
- dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
- __func__, epctrl);
-
-- writel(epctrl, hsotg->regs + epctrl_reg);
-+ dwc2_writel(epctrl, hsotg->regs + epctrl_reg);
- dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
-- __func__, readl(hsotg->regs + epctrl_reg));
-+ __func__, dwc2_readl(hsotg->regs + epctrl_reg));
-
- /* enable the endpoint interrupt */
- s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
-@@ -2770,13 +2770,13 @@ static int s3c_hsotg_ep_disable_force(st
- hs_ep->fifo_index = 0;
- hs_ep->fifo_size = 0;
-
-- ctrl = readl(hsotg->regs + epctrl_reg);
-+ ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
- ctrl &= ~DXEPCTL_EPENA;
- ctrl &= ~DXEPCTL_USBACTEP;
- ctrl |= DXEPCTL_SNAK;
-
- dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
-- writel(ctrl, hsotg->regs + epctrl_reg);
-+ dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
-
- /* disable endpoint interrupts */
- s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
-@@ -2863,7 +2863,7 @@ static int s3c_hsotg_ep_sethalt(struct u
-
- if (hs_ep->dir_in) {
- epreg = DIEPCTL(index);
-- epctl = readl(hs->regs + epreg);
-+ epctl = dwc2_readl(hs->regs + epreg);
-
- if (value) {
- epctl |= DXEPCTL_STALL + DXEPCTL_SNAK;
-@@ -2876,11 +2876,11 @@ static int s3c_hsotg_ep_sethalt(struct u
- xfertype == DXEPCTL_EPTYPE_INTERRUPT)
- epctl |= DXEPCTL_SETD0PID;
- }
-- writel(epctl, hs->regs + epreg);
-+ dwc2_writel(epctl, hs->regs + epreg);
- } else {
-
- epreg = DOEPCTL(index);
-- epctl = readl(hs->regs + epreg);
-+ epctl = dwc2_readl(hs->regs + epreg);
-
- if (value)
- epctl |= DXEPCTL_STALL;
-@@ -2891,7 +2891,7 @@ static int s3c_hsotg_ep_sethalt(struct u
- xfertype == DXEPCTL_EPTYPE_INTERRUPT)
- epctl |= DXEPCTL_SETD0PID;
- }
-- writel(epctl, hs->regs + epreg);
-+ dwc2_writel(epctl, hs->regs + epreg);
- }
-
- hs_ep->halted = value;
-@@ -2982,15 +2982,15 @@ static void s3c_hsotg_init(struct dwc2_h
- u32 trdtim;
- /* unmask subset of endpoint interrupts */
-
-- writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-+ dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
- DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK,
- hsotg->regs + DIEPMSK);
-
-- writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
-+ dwc2_writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
- DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK,
- hsotg->regs + DOEPMSK);
-
-- writel(0, hsotg->regs + DAINTMSK);
-+ dwc2_writel(0, hsotg->regs + DAINTMSK);
-
- /* Be in disconnected state until gadget is registered */
- __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
-@@ -2998,14 +2998,14 @@ static void s3c_hsotg_init(struct dwc2_h
- /* setup fifos */
-
- dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-- readl(hsotg->regs + GRXFSIZ),
-- readl(hsotg->regs + GNPTXFSIZ));
-+ dwc2_readl(hsotg->regs + GRXFSIZ),
-+ dwc2_readl(hsotg->regs + GNPTXFSIZ));
-
- s3c_hsotg_init_fifo(hsotg);
-
- /* set the PLL on, remove the HNP/SRP and set the PHY */
- trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
-- writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
-+ dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
- (trdtim << GUSBCFG_USBTRDTIM_SHIFT),
- hsotg->regs + GUSBCFG);
-
-@@ -3275,9 +3275,9 @@ static void s3c_hsotg_initep(struct dwc2
- if (using_dma(hsotg)) {
- u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15);
- if (dir_in)
-- writel(next, hsotg->regs + DIEPCTL(epnum));
-+ dwc2_writel(next, hsotg->regs + DIEPCTL(epnum));
- else
-- writel(next, hsotg->regs + DOEPCTL(epnum));
-+ dwc2_writel(next, hsotg->regs + DOEPCTL(epnum));
- }
- }
-
-@@ -3295,7 +3295,7 @@ static int s3c_hsotg_hw_cfg(struct dwc2_
-
- /* check hardware configuration */
-
-- cfg = readl(hsotg->regs + GHWCFG2);
-+ cfg = dwc2_readl(hsotg->regs + GHWCFG2);
- hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF;
- /* Add ep0 */
- hsotg->num_of_eps++;
-@@ -3307,7 +3307,7 @@ static int s3c_hsotg_hw_cfg(struct dwc2_
- /* Same s3c_hsotg_ep is used in both directions for ep0 */
- hsotg->eps_out[0] = hsotg->eps_in[0];
-
-- cfg = readl(hsotg->regs + GHWCFG1);
-+ cfg = dwc2_readl(hsotg->regs + GHWCFG1);
- for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
- ep_type = cfg & 3;
- /* Direction in or both */
-@@ -3326,10 +3326,10 @@ static int s3c_hsotg_hw_cfg(struct dwc2_
- }
- }
-
-- cfg = readl(hsotg->regs + GHWCFG3);
-+ cfg = dwc2_readl(hsotg->regs + GHWCFG3);
- hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT);
-
-- cfg = readl(hsotg->regs + GHWCFG4);
-+ cfg = dwc2_readl(hsotg->regs + GHWCFG4);
- hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1;
-
- dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
-@@ -3352,19 +3352,19 @@ static void s3c_hsotg_dump(struct dwc2_h
- int idx;
-
- dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
-- readl(regs + DCFG), readl(regs + DCTL),
-- readl(regs + DIEPMSK));
-+ dwc2_readl(regs + DCFG), dwc2_readl(regs + DCTL),
-+ dwc2_readl(regs + DIEPMSK));
-
- dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n",
-- readl(regs + GAHBCFG), readl(regs + GHWCFG1));
-+ dwc2_readl(regs + GAHBCFG), dwc2_readl(regs + GHWCFG1));
-
- dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-- readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ));
-+ dwc2_readl(regs + GRXFSIZ), dwc2_readl(regs + GNPTXFSIZ));
-
- /* show periodic fifo settings */
-
- for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-- val = readl(regs + DPTXFSIZN(idx));
-+ val = dwc2_readl(regs + DPTXFSIZN(idx));
- dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
- val >> FIFOSIZE_DEPTH_SHIFT,
- val & FIFOSIZE_STARTADDR_MASK);
-@@ -3373,21 +3373,21 @@ static void s3c_hsotg_dump(struct dwc2_h
- for (idx = 0; idx < hsotg->num_of_eps; idx++) {
- dev_info(dev,
- "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
-- readl(regs + DIEPCTL(idx)),
-- readl(regs + DIEPTSIZ(idx)),
-- readl(regs + DIEPDMA(idx)));
-+ dwc2_readl(regs + DIEPCTL(idx)),
-+ dwc2_readl(regs + DIEPTSIZ(idx)),
-+ dwc2_readl(regs + DIEPDMA(idx)));
-
-- val = readl(regs + DOEPCTL(idx));
-+ val = dwc2_readl(regs + DOEPCTL(idx));
- dev_info(dev,
- "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
-- idx, readl(regs + DOEPCTL(idx)),
-- readl(regs + DOEPTSIZ(idx)),
-- readl(regs + DOEPDMA(idx)));
-+ idx, dwc2_readl(regs + DOEPCTL(idx)),
-+ dwc2_readl(regs + DOEPTSIZ(idx)),
-+ dwc2_readl(regs + DOEPDMA(idx)));
-
- }
-
- dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
-- readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE));
-+ dwc2_readl(regs + DVBUSDIS), dwc2_readl(regs + DVBUSPULSE));
- #endif
- }
-
-@@ -3443,7 +3443,7 @@ static int testmode_show(struct seq_file
- int dctl;
-
- spin_lock_irqsave(&hsotg->lock, flags);
-- dctl = readl(hsotg->regs + DCTL);
-+ dctl = dwc2_readl(hsotg->regs + DCTL);
- dctl &= DCTL_TSTCTL_MASK;
- dctl >>= DCTL_TSTCTL_SHIFT;
- spin_unlock_irqrestore(&hsotg->lock, flags);
-@@ -3504,38 +3504,38 @@ static int state_show(struct seq_file *s
- int idx;
-
- seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
-- readl(regs + DCFG),
-- readl(regs + DCTL),
-- readl(regs + DSTS));
-+ dwc2_readl(regs + DCFG),
-+ dwc2_readl(regs + DCTL),
-+ dwc2_readl(regs + DSTS));
-
- seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
-- readl(regs + DIEPMSK), readl(regs + DOEPMSK));
-+ dwc2_readl(regs + DIEPMSK), dwc2_readl(regs + DOEPMSK));
-
- seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
-- readl(regs + GINTMSK),
-- readl(regs + GINTSTS));
-+ dwc2_readl(regs + GINTMSK),
-+ dwc2_readl(regs + GINTSTS));
-
- seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
-- readl(regs + DAINTMSK),
-- readl(regs + DAINT));
-+ dwc2_readl(regs + DAINTMSK),
-+ dwc2_readl(regs + DAINT));
-
- seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
-- readl(regs + GNPTXSTS),
-- readl(regs + GRXSTSR));
-+ dwc2_readl(regs + GNPTXSTS),
-+ dwc2_readl(regs + GRXSTSR));
-
- seq_puts(seq, "\nEndpoint status:\n");
-
- for (idx = 0; idx < hsotg->num_of_eps; idx++) {
- u32 in, out;
-
-- in = readl(regs + DIEPCTL(idx));
-- out = readl(regs + DOEPCTL(idx));
-+ in = dwc2_readl(regs + DIEPCTL(idx));
-+ out = dwc2_readl(regs + DOEPCTL(idx));
-
- seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
- idx, in, out);
-
-- in = readl(regs + DIEPTSIZ(idx));
-- out = readl(regs + DOEPTSIZ(idx));
-+ in = dwc2_readl(regs + DIEPTSIZ(idx));
-+ out = dwc2_readl(regs + DOEPTSIZ(idx));
-
- seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
- in, out);
-@@ -3575,9 +3575,9 @@ static int fifo_show(struct seq_file *se
- int idx;
-
- seq_puts(seq, "Non-periodic FIFOs:\n");
-- seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
-+ seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(regs + GRXFSIZ));
-
-- val = readl(regs + GNPTXFSIZ);
-+ val = dwc2_readl(regs + GNPTXFSIZ);
- seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
- val >> FIFOSIZE_DEPTH_SHIFT,
- val & FIFOSIZE_DEPTH_MASK);
-@@ -3585,7 +3585,7 @@ static int fifo_show(struct seq_file *se
- seq_puts(seq, "\nPeriodic TXFIFOs:\n");
-
- for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-- val = readl(regs + DPTXFSIZN(idx));
-+ val = dwc2_readl(regs + DPTXFSIZN(idx));
-
- seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
- val >> FIFOSIZE_DEPTH_SHIFT,
-@@ -3638,20 +3638,20 @@ static int ep_show(struct seq_file *seq,
- /* first show the register state */
-
- seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
-- readl(regs + DIEPCTL(index)),
-- readl(regs + DOEPCTL(index)));
-+ dwc2_readl(regs + DIEPCTL(index)),
-+ dwc2_readl(regs + DOEPCTL(index)));
-
- seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
-- readl(regs + DIEPDMA(index)),
-- readl(regs + DOEPDMA(index)));
-+ dwc2_readl(regs + DIEPDMA(index)),
-+ dwc2_readl(regs + DOEPDMA(index)));
-
- seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
-- readl(regs + DIEPINT(index)),
-- readl(regs + DOEPINT(index)));
-+ dwc2_readl(regs + DIEPINT(index)),
-+ dwc2_readl(regs + DOEPINT(index)));
-
- seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
-- readl(regs + DIEPTSIZ(index)),
-- readl(regs + DOEPTSIZ(index)));
-+ dwc2_readl(regs + DIEPTSIZ(index)),
-+ dwc2_readl(regs + DOEPTSIZ(index)));
-
- seq_puts(seq, "\n");
- seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -80,10 +80,10 @@ static void dwc2_dump_channel_info(struc
- if (chan == NULL)
- return;
-
-- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
-- hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
-- hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num));
-- hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-+ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chan->hc_num));
-+ hc_dma = dwc2_readl(hsotg->regs + HCDMA(chan->hc_num));
-
- dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan);
- dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n",
-@@ -207,7 +207,7 @@ void dwc2_hcd_start(struct dwc2_hsotg *h
- */
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RST;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
-
- queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
-@@ -228,11 +228,11 @@ static void dwc2_hcd_cleanup_channels(st
- channel = hsotg->hc_ptr_array[i];
- if (!list_empty(&channel->hc_list_entry))
- continue;
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- if (hcchar & HCCHAR_CHENA) {
- hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
- hcchar |= HCCHAR_CHDIS;
-- writel(hcchar, hsotg->regs + HCCHAR(i));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- }
- }
- }
-@@ -241,11 +241,11 @@ static void dwc2_hcd_cleanup_channels(st
- channel = hsotg->hc_ptr_array[i];
- if (!list_empty(&channel->hc_list_entry))
- continue;
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- if (hcchar & HCCHAR_CHENA) {
- /* Halt the channel */
- hcchar |= HCCHAR_CHDIS;
-- writel(hcchar, hsotg->regs + HCCHAR(i));
-+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- }
-
- dwc2_hc_cleanup(hsotg, channel);
-@@ -287,11 +287,11 @@ void dwc2_hcd_disconnect(struct dwc2_hso
- * interrupt mask and status bits and disabling subsequent host
- * channel interrupts.
- */
-- intr = readl(hsotg->regs + GINTMSK);
-+ intr = dwc2_readl(hsotg->regs + GINTMSK);
- intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
-- writel(intr, hsotg->regs + GINTMSK);
-+ dwc2_writel(intr, hsotg->regs + GINTMSK);
- intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
-- writel(intr, hsotg->regs + GINTSTS);
-+ dwc2_writel(intr, hsotg->regs + GINTSTS);
-
- /*
- * Turn off the vbus power only if the core has transitioned to device
-@@ -301,7 +301,7 @@ void dwc2_hcd_disconnect(struct dwc2_hso
- if (dwc2_is_device_mode(hsotg)) {
- if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
- dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
-- writel(0, hsotg->regs + HPRT0);
-+ dwc2_writel(0, hsotg->regs + HPRT0);
- }
-
- dwc2_disable_host_interrupts(hsotg);
-@@ -354,7 +354,7 @@ void dwc2_hcd_stop(struct dwc2_hsotg *hs
-
- /* Turn off the vbus power */
- dev_dbg(hsotg->dev, "PortPower off\n");
-- writel(0, hsotg->regs + HPRT0);
-+ dwc2_writel(0, hsotg->regs + HPRT0);
- }
-
- static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
-@@ -379,7 +379,7 @@ static int dwc2_hcd_urb_enqueue(struct d
- if ((dev_speed == USB_SPEED_LOW) &&
- (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
- (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
-- u32 hprt0 = readl(hsotg->regs + HPRT0);
-+ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
-
- if (prtspd == HPRT0_SPD_FULL_SPEED)
-@@ -401,7 +401,7 @@ static int dwc2_hcd_urb_enqueue(struct d
- return retval;
- }
-
-- intr_mask = readl(hsotg->regs + GINTMSK);
-+ intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- if (!(intr_mask & GINTSTS_SOF)) {
- enum dwc2_transaction_type tr_type;
-
-@@ -1069,7 +1069,7 @@ static void dwc2_process_periodic_channe
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
-
-- tx_status = readl(hsotg->regs + HPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1084,7 +1084,7 @@ static void dwc2_process_periodic_channe
-
- qh_ptr = hsotg->periodic_sched_assigned.next;
- while (qh_ptr != &hsotg->periodic_sched_assigned) {
-- tx_status = readl(hsotg->regs + HPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- if (qspcavail == 0) {
-@@ -1144,7 +1144,7 @@ static void dwc2_process_periodic_channe
- }
-
- if (hsotg->core_params->dma_enable <= 0) {
-- tx_status = readl(hsotg->regs + HPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1167,9 +1167,9 @@ static void dwc2_process_periodic_channe
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk |= GINTSTS_PTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
-@@ -1178,9 +1178,9 @@ static void dwc2_process_periodic_channe
- * handlers to queue more transactions as transfer
- * states change.
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk &= ~GINTSTS_PTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- }
- }
- }
-@@ -1209,7 +1209,7 @@ static void dwc2_process_non_periodic_ch
-
- dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
-
-- tx_status = readl(hsotg->regs + GNPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1232,7 +1232,7 @@ static void dwc2_process_non_periodic_ch
- * available in the request queue or the Tx FIFO
- */
- do {
-- tx_status = readl(hsotg->regs + GNPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) {
-@@ -1269,7 +1269,7 @@ next:
- } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
-
- if (hsotg->core_params->dma_enable <= 0) {
-- tx_status = readl(hsotg->regs + GNPTXSTS);
-+ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
- TXSTS_QSPCAVAIL_SHIFT;
- fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
-@@ -1289,9 +1289,9 @@ next:
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk |= GINTSTS_NPTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
-@@ -1300,9 +1300,9 @@ next:
- * handlers to queue more transactions as transfer
- * states change.
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk &= ~GINTSTS_NPTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- }
- }
- }
-@@ -1340,10 +1340,10 @@ void dwc2_hcd_queue_transactions(struct
- * Ensure NP Tx FIFO empty interrupt is disabled when
- * there are no non-periodic transfers to process
- */
-- u32 gintmsk = readl(hsotg->regs + GINTMSK);
-+ u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- gintmsk &= ~GINTSTS_NPTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- }
- }
- }
-@@ -1357,7 +1357,7 @@ static void dwc2_conn_id_status_change(s
-
- dev_dbg(hsotg->dev, "%s()\n", __func__);
-
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
- dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
- !!(gotgctl & GOTGCTL_CONID_B));
-@@ -1420,9 +1420,9 @@ static void dwc2_wakeup_detected(unsigne
- hprt0 = dwc2_read_hprt0(hsotg);
- dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
- hprt0 &= ~HPRT0_RES;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
-- readl(hsotg->regs + HPRT0));
-+ dwc2_readl(hsotg->regs + HPRT0));
-
- dwc2_hcd_rem_wakeup(hsotg);
-
-@@ -1450,30 +1450,30 @@ static void dwc2_port_suspend(struct dwc
- spin_lock_irqsave(&hsotg->lock, flags);
-
- if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
-- gotgctl = readl(hsotg->regs + GOTGCTL);
-+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- gotgctl |= GOTGCTL_HSTSETHNPEN;
-- writel(gotgctl, hsotg->regs + GOTGCTL);
-+ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
- hsotg->op_state = OTG_STATE_A_SUSPEND;
- }
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_SUSP;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
-
- /* Update lx_state */
- hsotg->lx_state = DWC2_L2;
-
- /* Suspend the Phy Clock */
-- pcgctl = readl(hsotg->regs + PCGCTL);
-+ pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgctl |= PCGCTL_STOPPCLK;
-- writel(pcgctl, hsotg->regs + PCGCTL);
-+ dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
- udelay(10);
-
- /* For HNP the bus must be suspended for at least 200ms */
- if (dwc2_host_is_b_hnp_enabled(hsotg)) {
-- pcgctl = readl(hsotg->regs + PCGCTL);
-+ pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgctl &= ~PCGCTL_STOPPCLK;
-- writel(pcgctl, hsotg->regs + PCGCTL);
-+ dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
-
- spin_unlock_irqrestore(&hsotg->lock, flags);
-
-@@ -1522,23 +1522,23 @@ static int dwc2_hcd_hub_control(struct d
- "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_ENA;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- break;
-
- case USB_PORT_FEAT_SUSPEND:
- dev_dbg(hsotg->dev,
- "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-- writel(0, hsotg->regs + PCGCTL);
-+ dwc2_writel(0, hsotg->regs + PCGCTL);
- usleep_range(20000, 40000);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- hprt0 &= ~HPRT0_SUSP;
- msleep(USB_RESUME_TIMEOUT);
-
- hprt0 &= ~HPRT0_RES;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- break;
-
- case USB_PORT_FEAT_POWER:
-@@ -1546,7 +1546,7 @@ static int dwc2_hcd_hub_control(struct d
- "ClearPortFeature USB_PORT_FEAT_POWER\n");
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 &= ~HPRT0_PWR;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- break;
-
- case USB_PORT_FEAT_INDICATOR:
-@@ -1667,7 +1667,7 @@ static int dwc2_hcd_hub_control(struct d
- break;
- }
-
-- hprt0 = readl(hsotg->regs + HPRT0);
-+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0);
-
- if (hprt0 & HPRT0_CONNSTS)
-@@ -1732,18 +1732,18 @@ static int dwc2_hcd_hub_control(struct d
- "SetPortFeature - USB_PORT_FEAT_POWER\n");
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_PWR;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- break;
-
- case USB_PORT_FEAT_RESET:
- hprt0 = dwc2_read_hprt0(hsotg);
- dev_dbg(hsotg->dev,
- "SetPortFeature - USB_PORT_FEAT_RESET\n");
-- pcgctl = readl(hsotg->regs + PCGCTL);
-+ pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
-- writel(pcgctl, hsotg->regs + PCGCTL);
-+ dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
- /* ??? Original driver does this */
-- writel(0, hsotg->regs + PCGCTL);
-+ dwc2_writel(0, hsotg->regs + PCGCTL);
-
- hprt0 = dwc2_read_hprt0(hsotg);
- /* Clear suspend bit if resetting from suspend state */
-@@ -1758,13 +1758,13 @@ static int dwc2_hcd_hub_control(struct d
- hprt0 |= HPRT0_PWR | HPRT0_RST;
- dev_dbg(hsotg->dev,
- "In host mode, hprt0=%08x\n", hprt0);
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
-
- /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
- usleep_range(50000, 70000);
- hprt0 &= ~HPRT0_RST;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- hsotg->lx_state = DWC2_L0; /* Now back to On state */
- break;
-
-@@ -1828,7 +1828,7 @@ static int dwc2_hcd_is_status_changed(st
-
- int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
- {
-- u32 hfnum = readl(hsotg->regs + HFNUM);
-+ u32 hfnum = dwc2_readl(hsotg->regs + HFNUM);
-
- #ifdef DWC2_DEBUG_SOF
- dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
-@@ -1931,11 +1931,11 @@ void dwc2_hcd_dump_state(struct dwc2_hso
- if (chan->xfer_started) {
- u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
-
-- hfnum = readl(hsotg->regs + HFNUM);
-- hcchar = readl(hsotg->regs + HCCHAR(i));
-- hctsiz = readl(hsotg->regs + HCTSIZ(i));
-- hcint = readl(hsotg->regs + HCINT(i));
-- hcintmsk = readl(hsotg->regs + HCINTMSK(i));
-+ hfnum = dwc2_readl(hsotg->regs + HFNUM);
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(i));
-+ hcint = dwc2_readl(hsotg->regs + HCINT(i));
-+ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(i));
- dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum);
- dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar);
- dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz);
-@@ -1983,12 +1983,12 @@ void dwc2_hcd_dump_state(struct dwc2_hso
- dev_dbg(hsotg->dev, " periodic_channels: %d\n",
- hsotg->periodic_channels);
- dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs);
-- np_tx_status = readl(hsotg->regs + GNPTXSTS);
-+ np_tx_status = dwc2_readl(hsotg->regs + GNPTXSTS);
- dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n",
- (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
- dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n",
- (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
-- p_tx_status = readl(hsotg->regs + HPTXSTS);
-+ p_tx_status = dwc2_readl(hsotg->regs + HPTXSTS);
- dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n",
- (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
- dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n",
-@@ -2252,7 +2252,7 @@ static void dwc2_hcd_reset_func(struct w
- dev_dbg(hsotg->dev, "USB RESET function called\n");
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 &= ~HPRT0_RST;
-- writel(hprt0, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
- hsotg->flags.b.port_reset_change = 1;
- }
-
-@@ -2729,17 +2729,17 @@ static void dwc2_hcd_free(struct dwc2_hs
- hsotg->status_buf = NULL;
- }
-
-- ahbcfg = readl(hsotg->regs + GAHBCFG);
-+ ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- /* Disable all interrupts */
- ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
-- writel(ahbcfg, hsotg->regs + GAHBCFG);
-- writel(0, hsotg->regs + GINTMSK);
-+ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
-+ dwc2_writel(0, hsotg->regs + GINTMSK);
-
- if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
-- dctl = readl(hsotg->regs + DCTL);
-+ dctl = dwc2_readl(hsotg->regs + DCTL);
- dctl |= DCTL_SFTDISCON;
-- writel(dctl, hsotg->regs + DCTL);
-+ dwc2_writel(dctl, hsotg->regs + DCTL);
- }
-
- if (hsotg->wq_otg) {
-@@ -2805,7 +2805,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
-
- retval = -ENOMEM;
-
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
-
- #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
---- a/drivers/usb/dwc2/hcd_ddma.c
-+++ b/drivers/usb/dwc2/hcd_ddma.c
-@@ -169,19 +169,19 @@ static void dwc2_per_sched_enable(struct
-
- spin_lock_irqsave(&hsotg->lock, flags);
-
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- if (hcfg & HCFG_PERSCHEDENA) {
- /* already enabled */
- spin_unlock_irqrestore(&hsotg->lock, flags);
- return;
- }
-
-- writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
-+ dwc2_writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
-
- hcfg &= ~HCFG_FRLISTEN_MASK;
- hcfg |= fr_list_en | HCFG_PERSCHEDENA;
- dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n");
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
-
- spin_unlock_irqrestore(&hsotg->lock, flags);
- }
-@@ -193,7 +193,7 @@ static void dwc2_per_sched_disable(struc
-
- spin_lock_irqsave(&hsotg->lock, flags);
-
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- if (!(hcfg & HCFG_PERSCHEDENA)) {
- /* already disabled */
- spin_unlock_irqrestore(&hsotg->lock, flags);
-@@ -202,7 +202,7 @@ static void dwc2_per_sched_disable(struc
-
- hcfg &= ~HCFG_PERSCHEDENA;
- dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n");
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
-
- spin_unlock_irqrestore(&hsotg->lock, flags);
- }
---- a/drivers/usb/dwc2/hcd.h
-+++ b/drivers/usb/dwc2/hcd.h
-@@ -371,10 +371,10 @@ static inline struct usb_hcd *dwc2_hsotg
- */
- static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
- {
-- u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
-+ u32 mask = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
-
- mask &= ~intr;
-- writel(mask, hsotg->regs + HCINTMSK(chnum));
-+ dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
- }
-
- /*
-@@ -382,11 +382,11 @@ static inline void disable_hc_int(struct
- */
- static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
- {
-- return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
-+ return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
- }
- static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
- {
-- return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
-+ return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
- }
-
- /*
-@@ -395,7 +395,7 @@ static inline int dwc2_is_device_mode(st
- */
- static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
- {
-- u32 hprt0 = readl(hsotg->regs + HPRT0);
-+ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
-
- hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
- return hprt0;
-@@ -582,7 +582,7 @@ static inline u16 dwc2_micro_frame_num(u
- */
- static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
- {
-- return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
-+ return dwc2_readl(hsotg->regs + GINTSTS) & dwc2_readl(hsotg->regs + GINTMSK);
- }
-
- static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
-@@ -734,7 +734,7 @@ do { \
- qtd_list_entry); \
- if (usb_pipeint(_qtd_->urb->pipe) && \
- (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \
-- _hfnum_.d32 = readl((_hcd_)->regs + HFNUM); \
-+ _hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM); \
- switch (_hfnum_.b.frnum & 0x7) { \
- case 7: \
- (_hcd_)->hfnum_7_samples_##_letter_++; \
---- a/drivers/usb/dwc2/hcd_intr.c
-+++ b/drivers/usb/dwc2/hcd_intr.c
-@@ -148,7 +148,7 @@ static void dwc2_sof_intr(struct dwc2_hs
- dwc2_hcd_queue_transactions(hsotg, tr_type);
-
- /* Clear interrupt */
-- writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
-+ dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
- }
-
- /*
-@@ -164,7 +164,7 @@ static void dwc2_rx_fifo_level_intr(stru
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
-
-- grxsts = readl(hsotg->regs + GRXSTSP);
-+ grxsts = dwc2_readl(hsotg->regs + GRXSTSP);
- chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT;
- chan = hsotg->hc_ptr_array[chnum];
- if (!chan) {
-@@ -247,11 +247,11 @@ static void dwc2_hprt0_enable(struct dwc
- dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- /* Every time when port enables calculate HFIR.FrInterval */
-- hfir = readl(hsotg->regs + HFIR);
-+ hfir = dwc2_readl(hsotg->regs + HFIR);
- hfir &= ~HFIR_FRINT_MASK;
- hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
- HFIR_FRINT_MASK;
-- writel(hfir, hsotg->regs + HFIR);
-+ dwc2_writel(hfir, hsotg->regs + HFIR);
-
- /* Check if we need to adjust the PHY clock speed for low power */
- if (!params->host_support_fs_ls_low_power) {
-@@ -260,7 +260,7 @@ static void dwc2_hprt0_enable(struct dwc
- return;
- }
-
-- usbcfg = readl(hsotg->regs + GUSBCFG);
-+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
-
- if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
-@@ -268,11 +268,11 @@ static void dwc2_hprt0_enable(struct dwc
- if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
- /* Set PHY low power clock select for FS/LS devices */
- usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- do_reset = 1;
- }
-
-- hcfg = readl(hsotg->regs + HCFG);
-+ hcfg = dwc2_readl(hsotg->regs + HCFG);
- fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >>
- HCFG_FSLSPCLKSEL_SHIFT;
-
-@@ -286,7 +286,7 @@ static void dwc2_hprt0_enable(struct dwc
- fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ;
- hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
- do_reset = 1;
- }
- } else {
-@@ -297,7 +297,7 @@ static void dwc2_hprt0_enable(struct dwc
- fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ;
- hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
-- writel(hcfg, hsotg->regs + HCFG);
-+ dwc2_writel(hcfg, hsotg->regs + HCFG);
- do_reset = 1;
- }
- }
-@@ -305,7 +305,7 @@ static void dwc2_hprt0_enable(struct dwc
- /* Not low power */
- if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
- usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
-- writel(usbcfg, hsotg->regs + GUSBCFG);
-+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- do_reset = 1;
- }
- }
-@@ -332,7 +332,7 @@ static void dwc2_port_intr(struct dwc2_h
-
- dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
-
-- hprt0 = readl(hsotg->regs + HPRT0);
-+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- hprt0_modify = hprt0;
-
- /*
-@@ -385,7 +385,7 @@ static void dwc2_port_intr(struct dwc2_h
- }
-
- /* Clear Port Interrupts */
-- writel(hprt0_modify, hsotg->regs + HPRT0);
-+ dwc2_writel(hprt0_modify, hsotg->regs + HPRT0);
- }
-
- /*
-@@ -405,7 +405,7 @@ static u32 dwc2_get_actual_xfer_length(s
- {
- u32 hctsiz, count, length;
-
-- hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-
- if (halt_status == DWC2_HC_XFER_COMPLETE) {
- if (chan->ep_is_in) {
-@@ -483,7 +483,7 @@ static int dwc2_update_urb_state(struct
- urb->status = 0;
- }
-
-- hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
- __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
- dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len);
-@@ -506,7 +506,7 @@ void dwc2_hcd_save_data_toggle(struct dw
- struct dwc2_host_chan *chan, int chnum,
- struct dwc2_qtd *qtd)
- {
-- u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+ u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
-
- if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
-@@ -753,9 +753,9 @@ cleanup:
- }
- }
-
-- haintmsk = readl(hsotg->regs + HAINTMSK);
-+ haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- haintmsk &= ~(1 << chan->hc_num);
-- writel(haintmsk, hsotg->regs + HAINTMSK);
-+ dwc2_writel(haintmsk, hsotg->regs + HAINTMSK);
-
- /* Try to queue more transfers now that there's a free channel */
- tr_type = dwc2_hcd_select_transactions(hsotg);
-@@ -802,9 +802,9 @@ static void dwc2_halt_channel(struct dwc
- * is enabled so that the non-periodic schedule will
- * be processed
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk |= GINTSTS_NPTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- } else {
- dev_vdbg(hsotg->dev, "isoc/intr\n");
- /*
-@@ -821,9 +821,9 @@ static void dwc2_halt_channel(struct dwc
- * enabled so that the periodic schedule will be
- * processed
- */
-- gintmsk = readl(hsotg->regs + GINTMSK);
-+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
- gintmsk |= GINTSTS_PTXFEMP;
-- writel(gintmsk, hsotg->regs + GINTMSK);
-+ dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
- }
- }
- }
-@@ -888,7 +888,7 @@ static void dwc2_complete_periodic_xfer(
- struct dwc2_qtd *qtd,
- enum dwc2_halt_status halt_status)
- {
-- u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+ u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-
- qtd->error_count = 0;
-
-@@ -1158,7 +1158,7 @@ static void dwc2_update_urb_state_abn(st
-
- urb->actual_length += xfer_length;
-
-- hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
- dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
- __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
- dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n",
-@@ -1469,10 +1469,10 @@ static void dwc2_hc_ahberr_intr(struct d
-
- dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
-
-- hcchar = readl(hsotg->regs + HCCHAR(chnum));
-- hcsplt = readl(hsotg->regs + HCSPLT(chnum));
-- hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-- hc_dma = readl(hsotg->regs + HCDMA(chnum));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
-+ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-+ hc_dma = dwc2_readl(hsotg->regs + HCDMA(chnum));
-
- dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
- dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
-@@ -1685,10 +1685,10 @@ static bool dwc2_halt_status_ok(struct d
- * This code is here only as a check. This condition should
- * never happen. Ignore the halt if it does occur.
- */
-- hcchar = readl(hsotg->regs + HCCHAR(chnum));
-- hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
-- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-- hcsplt = readl(hsotg->regs + HCSPLT(chnum));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
-+ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
-+ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
-+ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
- dev_dbg(hsotg->dev,
- "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
- __func__);
-@@ -1712,7 +1712,7 @@ static bool dwc2_halt_status_ok(struct d
- * when the halt interrupt occurs. Halt the channel again if it does
- * occur.
- */
-- hcchar = readl(hsotg->regs + HCCHAR(chnum));
-+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
- if (hcchar & HCCHAR_CHDIS) {
- dev_warn(hsotg->dev,
- "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
-@@ -1772,7 +1772,7 @@ static void dwc2_hc_chhltd_intr_dma(stru
- return;
- }
-
-- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-+ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
-
- if (chan->hcint & HCINTMSK_XFERCOMPL) {
- /*
-@@ -1867,7 +1867,7 @@ static void dwc2_hc_chhltd_intr_dma(stru
- dev_err(hsotg->dev,
- "hcint 0x%08x, intsts 0x%08x\n",
- chan->hcint,
-- readl(hsotg->regs + GINTSTS));
-+ dwc2_readl(hsotg->regs + GINTSTS));
- goto error;
- }
- }
-@@ -1922,11 +1922,11 @@ static void dwc2_hc_n_intr(struct dwc2_h
-
- chan = hsotg->hc_ptr_array[chnum];
-
-- hcint = readl(hsotg->regs + HCINT(chnum));
-- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
-+ hcint = dwc2_readl(hsotg->regs + HCINT(chnum));
-+ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
- if (!chan) {
- dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
-- writel(hcint, hsotg->regs + HCINT(chnum));
-+ dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
- return;
- }
-
-@@ -1938,7 +1938,7 @@ static void dwc2_hc_n_intr(struct dwc2_h
- hcint, hcintmsk, hcint & hcintmsk);
- }
-
-- writel(hcint, hsotg->regs + HCINT(chnum));
-+ dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
- chan->hcint = hcint;
- hcint &= hcintmsk;
-
-@@ -2030,7 +2030,7 @@ static void dwc2_hc_intr(struct dwc2_hso
- u32 haint;
- int i;
-
-- haint = readl(hsotg->regs + HAINT);
-+ haint = dwc2_readl(hsotg->regs + HAINT);
- if (dbg_perio()) {
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
-@@ -2098,8 +2098,8 @@ irqreturn_t dwc2_handle_hcd_intr(struct
- "DWC OTG HCD Finished Servicing Interrupts\n");
- dev_vdbg(hsotg->dev,
- "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
-- readl(hsotg->regs + GINTSTS),
-- readl(hsotg->regs + GINTMSK));
-+ dwc2_readl(hsotg->regs + GINTSTS),
-+ dwc2_readl(hsotg->regs + GINTMSK));
- }
- }
-
---- a/drivers/usb/dwc2/hcd_queue.c
-+++ b/drivers/usb/dwc2/hcd_queue.c
-@@ -115,7 +115,7 @@ static void dwc2_qh_init(struct dwc2_hso
- if (qh->ep_type == USB_ENDPOINT_XFER_INT)
- qh->interval = 8;
- #endif
-- hprt = readl(hsotg->regs + HPRT0);
-+ hprt = dwc2_readl(hsotg->regs + HPRT0);
- prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- if (prtspd == HPRT0_SPD_HIGH_SPEED &&
- (dev_speed == USB_SPEED_LOW ||
-@@ -593,9 +593,9 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *h
- if (status)
- return status;
- if (!hsotg->periodic_qh_count) {
-- intr_mask = readl(hsotg->regs + GINTMSK);
-+ intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- intr_mask |= GINTSTS_SOF;
-- writel(intr_mask, hsotg->regs + GINTMSK);
-+ dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
- }
- hsotg->periodic_qh_count++;
-
-@@ -630,9 +630,9 @@ void dwc2_hcd_qh_unlink(struct dwc2_hsot
- dwc2_deschedule_periodic(hsotg, qh);
- hsotg->periodic_qh_count--;
- if (!hsotg->periodic_qh_count) {
-- intr_mask = readl(hsotg->regs + GINTMSK);
-+ intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
- intr_mask &= ~GINTSTS_SOF;
-- writel(intr_mask, hsotg->regs + GINTMSK);
-+ dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
- }
- }
-
diff --git a/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch b/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch
deleted file mode 100644
index d43cdf3d54..0000000000
--- a/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 08b085a07efe12568d86dff064e6f089e2971744 Mon Sep 17 00:00:00 2001
-From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Date: Mon, 25 May 2015 22:39:50 +0200
-Subject: gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
-
-0x3 only masks two bits, but three bits have to be allowed. This fixes
-GPHY0 LED2 (which is the highest bit of phy2) on my board.
-
-Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Acked-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
---- a/drivers/gpio/gpio-stp-xway.c
-+++ b/drivers/gpio/gpio-stp-xway.c
-@@ -58,7 +58,7 @@
- #define XWAY_STP_ADSL_MASK 0x3
-
- /* 2 groups of 3 bits can be driven by the phys */
--#define XWAY_STP_PHY_MASK 0x3
-+#define XWAY_STP_PHY_MASK 0x7
- #define XWAY_STP_PHY1_SHIFT 27
- #define XWAY_STP_PHY2_SHIFT 15
-
diff --git a/target/linux/lantiq/patches-4.1/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch b/target/linux/lantiq/patches-4.1/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
deleted file mode 100644
index bfa8b35bce..0000000000
--- a/target/linux/lantiq/patches-4.1/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
+++ /dev/null
@@ -1,1378 +0,0 @@
-From be14811c03cf20c793fd176a347625335110b0e6 Mon Sep 17 00:00:00 2001
-From: Martin Schiller <mschiller@tdt.de>
-Date: Thu, 26 Nov 2015 11:00:07 +0100
-Subject: [PATCH] pinctrl/lantiq: introduce new dedicated devicetree bindings
-
-This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree
-bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or
-"xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and
-"lantiq,pinctrl-xr9" bindings as DEPRECATED.
-
-Based on the newest Lantiq Hardware Description it turend out, that there are
-some differences in the GPIO alternative functions of the Danube, xRX100 and
-xRX200 families, which makes it impossible to use only one xway_mfp table.
-
-This patch also adds support for the xRX300 family.
-
-Signed-off-by: Martin Schiller <mschiller@tdt.de>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-lantiq.h | 8 +
- drivers/pinctrl/pinctrl-xway.c | 1181 +++++++++++++++++++++++++++++++++-----
- 2 files changed, 1059 insertions(+), 130 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-lantiq.h
-+++ b/drivers/pinctrl/pinctrl-lantiq.h
-@@ -162,6 +162,14 @@ enum ltq_pin {
- GPIO53,
- GPIO54,
- GPIO55,
-+ GPIO56,
-+ GPIO57,
-+ GPIO58,
-+ GPIO59,
-+ GPIO60, /* 60 */
-+ GPIO61,
-+ GPIO62,
-+ GPIO63,
-
- GPIO64,
- GPIO65,
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -7,6 +7,7 @@
- * publishhed by the Free Software Foundation.
- *
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2015 Martin Schiller <mschiller@tdt.de>
- */
-
- #include <linux/err.h>
-@@ -24,7 +25,7 @@
-
- #include <lantiq_soc.h>
-
--/* we have 3 1/2 banks of 16 bit each */
-+/* we have up to 4 banks of 16 bit each */
- #define PINS 16
- #define PORT3 3
- #define PORT(x) (x / PINS)
-@@ -35,7 +36,7 @@
- #define MUX_ALT1 0x2
-
- /*
-- * each bank has this offset apart from the 1/2 bank that is mixed into the
-+ * each bank has this offset apart from the 4th bank that is mixed into the
- * other 3 ranges
- */
- #define REG_OFF 0x30
-@@ -51,7 +52,7 @@
- #define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c)
- #define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20)
-
--/* the 1/2 port needs special offsets for some registers */
-+/* the 4th port needs special offsets for some registers */
- #define GPIO3_OD (GPIO_BASE(0) + 0x24)
- #define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28)
- #define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C)
-@@ -80,17 +81,18 @@
- #define FUNC_MUX(f, m) \
- { .func = f, .mux = XWAY_MUX_##m, }
-
--#define XWAY_MAX_PIN 32
--#define XR9_MAX_PIN 56
--
- enum xway_mux {
- XWAY_MUX_GPIO = 0,
- XWAY_MUX_SPI,
- XWAY_MUX_ASC,
-+ XWAY_MUX_USIF,
- XWAY_MUX_PCI,
-+ XWAY_MUX_CBUS,
- XWAY_MUX_CGU,
- XWAY_MUX_EBU,
-+ XWAY_MUX_EBU2,
- XWAY_MUX_JTAG,
-+ XWAY_MUX_MCD,
- XWAY_MUX_EXIN,
- XWAY_MUX_TDM,
- XWAY_MUX_STP,
-@@ -103,9 +105,15 @@ enum xway_mux {
- XWAY_MUX_DFE,
- XWAY_MUX_SDIO,
- XWAY_MUX_GPHY,
-+ XWAY_MUX_SSI,
-+ XWAY_MUX_WIFI,
- XWAY_MUX_NONE = 0xffff,
- };
-
-+/* --------- DEPRECATED: xr9 related code --------- */
-+/* ---------- use xrx100/xrx200 instead ---------- */
-+#define XR9_MAX_PIN 56
-+
- static const struct ltq_mfp_pin xway_mfp[] = {
- /* pin f0 f1 f2 f3 */
- MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM),
-@@ -113,7 +121,7 @@ static const struct ltq_mfp_pin xway_mfp
- MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY),
- MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI),
- MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC),
-- MFP_XWAY(GPIO5, GPIO, STP, NONE, GPHY),
-+ MFP_XWAY(GPIO5, GPIO, STP, GPHY, NONE),
- MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC),
- MFP_XWAY(GPIO7, GPIO, CGU, PCI, GPHY),
- MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE),
-@@ -152,7 +160,7 @@ static const struct ltq_mfp_pin xway_mfp
- MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE),
- MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
- MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
-- MFP_XWAY(GPIO44, GPIO, NONE, GPHY, SIN),
-+ MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY),
- MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN),
- MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN),
- MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN),
-@@ -166,42 +174,6 @@ static const struct ltq_mfp_pin xway_mfp
- MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE),
- };
-
--static const struct ltq_mfp_pin ase_mfp[] = {
-- /* pin f0 f1 f2 f3 */
-- MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM),
-- MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU),
-- MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
-- MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU),
-- MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII),
-- MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT),
-- MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN),
-- MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG),
-- MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG),
-- MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG),
-- MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG),
-- MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG),
-- MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO),
-- MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU),
-- MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU),
-- MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO),
-- MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE),
-- MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE),
-- MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE),
-- MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO),
-- MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO),
-- MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO),
-- MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU),
-- MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU),
-- MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII),
-- MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT),
-- MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO),
-- MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII),
-- MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO),
-- MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN),
-- MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE),
-- MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE),
--};
--
- static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35};
- static const unsigned pins_asc0[] = {GPIO11, GPIO12};
- static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10};
-@@ -231,6 +203,8 @@ static const unsigned pins_nand_cle[] =
- static const unsigned pins_nand_rdy[] = {GPIO48};
- static const unsigned pins_nand_rd[] = {GPIO49};
-
-+static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
-+
- static const unsigned pins_exin0[] = {GPIO0};
- static const unsigned pins_exin1[] = {GPIO1};
- static const unsigned pins_exin2[] = {GPIO2};
-@@ -240,7 +214,7 @@ static const unsigned pins_exin5[] = {GP
-
- static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18};
- static const unsigned pins_spi_cs1[] = {GPIO15};
--static const unsigned pins_spi_cs2[] = {GPIO21};
-+static const unsigned pins_spi_cs2[] = {GPIO22};
- static const unsigned pins_spi_cs3[] = {GPIO13};
- static const unsigned pins_spi_cs4[] = {GPIO10};
- static const unsigned pins_spi_cs5[] = {GPIO9};
-@@ -264,25 +238,6 @@ static const unsigned pins_pci_req2[] =
- static const unsigned pins_pci_req3[] = {GPIO3};
- static const unsigned pins_pci_req4[] = {GPIO37};
-
--static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
--static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
--static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
--static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4};
--static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2};
--
--static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10};
--static const unsigned ase_pins_spi_cs1[] = {GPIO7};
--static const unsigned ase_pins_spi_cs2[] = {GPIO15};
--static const unsigned ase_pins_spi_cs3[] = {GPIO14};
--
--static const unsigned ase_pins_exin0[] = {GPIO6};
--static const unsigned ase_pins_exin1[] = {GPIO29};
--static const unsigned ase_pins_exin2[] = {GPIO0};
--
--static const unsigned ase_pins_gpt1[] = {GPIO5};
--static const unsigned ase_pins_gpt2[] = {GPIO4};
--static const unsigned ase_pins_gpt3[] = {GPIO25};
--
- static const struct ltq_pin_group xway_grps[] = {
- GRP_MUX("exin0", EXIN, pins_exin0),
- GRP_MUX("exin1", EXIN, pins_exin1),
-@@ -338,24 +293,6 @@ static const struct ltq_pin_group xway_g
- GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2),
- };
-
--static const struct ltq_pin_group ase_grps[] = {
-- GRP_MUX("exin0", EXIN, ase_pins_exin0),
-- GRP_MUX("exin1", EXIN, ase_pins_exin1),
-- GRP_MUX("exin2", EXIN, ase_pins_exin2),
-- GRP_MUX("jtag", JTAG, ase_pins_jtag),
-- GRP_MUX("stp", STP, ase_pins_stp),
-- GRP_MUX("asc", ASC, ase_pins_asc),
-- GRP_MUX("gpt1", GPT, ase_pins_gpt1),
-- GRP_MUX("gpt2", GPT, ase_pins_gpt2),
-- GRP_MUX("gpt3", GPT, ase_pins_gpt3),
-- GRP_MUX("ephy", EPHY, ase_pins_ephy),
-- GRP_MUX("dfe", DFE, ase_pins_dfe),
-- GRP_MUX("spi", SPI, ase_pins_spi),
-- GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
-- GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
-- GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
--};
--
- static const char * const xway_pci_grps[] = {"gnt1", "gnt2",
- "gnt3", "req1",
- "req2", "req3"};
-@@ -395,30 +332,6 @@ static const char * const xrx_pci_grps[]
- "req1", "req2",
- "req3", "req4"};
-
--/* ase */
--static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
--static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
--static const char * const ase_dfe_grps[] = {"dfe"};
--static const char * const ase_ephy_grps[] = {"ephy"};
--static const char * const ase_asc_grps[] = {"asc"};
--static const char * const ase_jtag_grps[] = {"jtag"};
--static const char * const ase_stp_grps[] = {"stp"};
--static const char * const ase_spi_grps[] = {"spi", "spi_cs1",
-- "spi_cs2", "spi_cs3"};
--
--static const struct ltq_pmx_func danube_funcs[] = {
-- {"spi", ARRAY_AND_SIZE(xway_spi_grps)},
-- {"asc", ARRAY_AND_SIZE(xway_asc_grps)},
-- {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)},
-- {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)},
-- {"exin", ARRAY_AND_SIZE(xway_exin_grps)},
-- {"stp", ARRAY_AND_SIZE(xway_stp_grps)},
-- {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)},
-- {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)},
-- {"pci", ARRAY_AND_SIZE(xway_pci_grps)},
-- {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)},
--};
--
- static const struct ltq_pmx_func xrx_funcs[] = {
- {"spi", ARRAY_AND_SIZE(xway_spi_grps)},
- {"asc", ARRAY_AND_SIZE(xway_asc_grps)},
-@@ -434,17 +347,991 @@ static const struct ltq_pmx_func xrx_fun
- {"gphy", ARRAY_AND_SIZE(xrx_gphy_grps)},
- };
-
-+/* --------- ase related code --------- */
-+#define ASE_MAX_PIN 32
-+
-+static const struct ltq_mfp_pin ase_mfp[] = {
-+ /* pin f0 f1 f2 f3 */
-+ MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM),
-+ MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU),
-+ MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
-+ MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU),
-+ MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII),
-+ MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT),
-+ MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN),
-+ MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG),
-+ MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG),
-+ MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG),
-+ MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG),
-+ MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG),
-+ MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO),
-+ MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU),
-+ MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU),
-+ MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO),
-+ MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO),
-+ MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO),
-+ MFP_XWAY(GPIO21, GPIO, EBU, MII, EBU2),
-+ MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU),
-+ MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU),
-+ MFP_XWAY(GPIO24, GPIO, EBU, EBU2, MDIO),
-+ MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT),
-+ MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO),
-+ MFP_XWAY(GPIO27, GPIO, EBU, NONE, MDIO),
-+ MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO),
-+ MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN),
-+ MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE),
-+};
-+
-+static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0};
-+
-+static const unsigned ase_pins_exin0[] = {GPIO6};
-+static const unsigned ase_pins_exin1[] = {GPIO29};
-+static const unsigned ase_pins_exin2[] = {GPIO0};
-+
-+static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
-+static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
-+static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
-+static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27};
-+static const unsigned ase_pins_ephy_led0[] = {GPIO2};
-+static const unsigned ase_pins_ephy_led1[] = {GPIO3};
-+static const unsigned ase_pins_ephy_led2[] = {GPIO4};
-+static const unsigned ase_pins_dfe_led0[] = {GPIO1};
-+static const unsigned ase_pins_dfe_led1[] = {GPIO2};
-+
-+static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */
-+static const unsigned ase_pins_spi_di[] = {GPIO8};
-+static const unsigned ase_pins_spi_do[] = {GPIO9};
-+static const unsigned ase_pins_spi_clk[] = {GPIO10};
-+static const unsigned ase_pins_spi_cs1[] = {GPIO7};
-+static const unsigned ase_pins_spi_cs2[] = {GPIO15};
-+static const unsigned ase_pins_spi_cs3[] = {GPIO14};
-+
-+static const unsigned ase_pins_gpt1[] = {GPIO5};
-+static const unsigned ase_pins_gpt2[] = {GPIO4};
-+static const unsigned ase_pins_gpt3[] = {GPIO25};
-+
-+static const unsigned ase_pins_clkout0[] = {GPIO23};
-+static const unsigned ase_pins_clkout1[] = {GPIO22};
-+static const unsigned ase_pins_clkout2[] = {GPIO14};
-+
-+static const struct ltq_pin_group ase_grps[] = {
-+ GRP_MUX("exin0", EXIN, ase_pins_exin0),
-+ GRP_MUX("exin1", EXIN, ase_pins_exin1),
-+ GRP_MUX("exin2", EXIN, ase_pins_exin2),
-+ GRP_MUX("jtag", JTAG, ase_pins_jtag),
-+ GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */
-+ GRP_MUX("spi_di", SPI, ase_pins_spi_di),
-+ GRP_MUX("spi_do", SPI, ase_pins_spi_do),
-+ GRP_MUX("spi_clk", SPI, ase_pins_spi_clk),
-+ GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
-+ GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
-+ GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
-+ GRP_MUX("asc", ASC, ase_pins_asc),
-+ GRP_MUX("stp", STP, ase_pins_stp),
-+ GRP_MUX("gpt1", GPT, ase_pins_gpt1),
-+ GRP_MUX("gpt2", GPT, ase_pins_gpt2),
-+ GRP_MUX("gpt3", GPT, ase_pins_gpt3),
-+ GRP_MUX("clkout0", CGU, ase_pins_clkout0),
-+ GRP_MUX("clkout1", CGU, ase_pins_clkout1),
-+ GRP_MUX("clkout2", CGU, ase_pins_clkout2),
-+ GRP_MUX("mdio", MDIO, ase_pins_mdio),
-+ GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0),
-+ GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1),
-+ GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0),
-+ GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1),
-+ GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2),
-+};
-+
-+static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
-+static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
-+static const char * const ase_cgu_grps[] = {"clkout0", "clkout1",
-+ "clkout2"};
-+static const char * const ase_mdio_grps[] = {"mdio"};
-+static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"};
-+static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1",
-+ "ephy led2"};
-+static const char * const ase_asc_grps[] = {"asc"};
-+static const char * const ase_jtag_grps[] = {"jtag"};
-+static const char * const ase_stp_grps[] = {"stp"};
-+static const char * const ase_spi_grps[] = {"spi", /* DEPRECATED */
-+ "spi_di", "spi_do",
-+ "spi_clk", "spi_cs1",
-+ "spi_cs2", "spi_cs3"};
-+
- static const struct ltq_pmx_func ase_funcs[] = {
- {"spi", ARRAY_AND_SIZE(ase_spi_grps)},
- {"asc", ARRAY_AND_SIZE(ase_asc_grps)},
-+ {"cgu", ARRAY_AND_SIZE(ase_cgu_grps)},
- {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)},
- {"exin", ARRAY_AND_SIZE(ase_exin_grps)},
- {"stp", ARRAY_AND_SIZE(ase_stp_grps)},
- {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)},
-+ {"mdio", ARRAY_AND_SIZE(ase_mdio_grps)},
- {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)},
- {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)},
- };
-
-+/* --------- danube related code --------- */
-+#define DANUBE_MAX_PIN 32
-+
-+static const struct ltq_mfp_pin danube_mfp[] = {
-+ /* pin f0 f1 f2 f3 */
-+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM),
-+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, MII),
-+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII),
-+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI),
-+ MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC),
-+ MFP_XWAY(GPIO5, GPIO, STP, MII, DFE),
-+ MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC),
-+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, MII),
-+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, MII),
-+ MFP_XWAY(GPIO9, GPIO, ASC, SPI, MII),
-+ MFP_XWAY(GPIO10, GPIO, ASC, SPI, MII),
-+ MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI),
-+ MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD),
-+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, MII),
-+ MFP_XWAY(GPIO14, GPIO, CGU, CBUS, MII),
-+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, JTAG),
-+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, JTAG),
-+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, JTAG),
-+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, JTAG),
-+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, MII),
-+ MFP_XWAY(GPIO20, GPIO, JTAG, SDIO, MII),
-+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT),
-+ MFP_XWAY(GPIO22, GPIO, SPI, MCD, MII),
-+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP),
-+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI),
-+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC),
-+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO),
-+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC),
-+ MFP_XWAY(GPIO28, GPIO, GPT, MII, SDIO),
-+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, MII),
-+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, MII),
-+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, MII),
-+};
-+
-+static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2};
-+
-+static const unsigned danube_pins_exin0[] = {GPIO0};
-+static const unsigned danube_pins_exin1[] = {GPIO1};
-+static const unsigned danube_pins_exin2[] = {GPIO2};
-+
-+static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20};
-+static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12};
-+static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
-+static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6};
-+static const unsigned danube_pins_nmi[] = {GPIO8};
-+
-+static const unsigned danube_pins_dfe_led0[] = {GPIO4};
-+static const unsigned danube_pins_dfe_led1[] = {GPIO5};
-+
-+static const unsigned danube_pins_ebu_a24[] = {GPIO13};
-+static const unsigned danube_pins_ebu_clk[] = {GPIO21};
-+static const unsigned danube_pins_ebu_cs1[] = {GPIO23};
-+static const unsigned danube_pins_ebu_a23[] = {GPIO24};
-+static const unsigned danube_pins_ebu_wait[] = {GPIO26};
-+static const unsigned danube_pins_ebu_a25[] = {GPIO31};
-+
-+static const unsigned danube_pins_nand_ale[] = {GPIO13};
-+static const unsigned danube_pins_nand_cs1[] = {GPIO23};
-+static const unsigned danube_pins_nand_cle[] = {GPIO24};
-+
-+static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */
-+static const unsigned danube_pins_spi_di[] = {GPIO16};
-+static const unsigned danube_pins_spi_do[] = {GPIO17};
-+static const unsigned danube_pins_spi_clk[] = {GPIO18};
-+static const unsigned danube_pins_spi_cs1[] = {GPIO15};
-+static const unsigned danube_pins_spi_cs2[] = {GPIO21};
-+static const unsigned danube_pins_spi_cs3[] = {GPIO13};
-+static const unsigned danube_pins_spi_cs4[] = {GPIO10};
-+static const unsigned danube_pins_spi_cs5[] = {GPIO9};
-+static const unsigned danube_pins_spi_cs6[] = {GPIO11};
-+
-+static const unsigned danube_pins_gpt1[] = {GPIO28};
-+static const unsigned danube_pins_gpt2[] = {GPIO21};
-+static const unsigned danube_pins_gpt3[] = {GPIO6};
-+
-+static const unsigned danube_pins_clkout0[] = {GPIO8};
-+static const unsigned danube_pins_clkout1[] = {GPIO7};
-+static const unsigned danube_pins_clkout2[] = {GPIO3};
-+static const unsigned danube_pins_clkout3[] = {GPIO2};
-+
-+static const unsigned danube_pins_pci_gnt1[] = {GPIO30};
-+static const unsigned danube_pins_pci_gnt2[] = {GPIO23};
-+static const unsigned danube_pins_pci_gnt3[] = {GPIO19};
-+static const unsigned danube_pins_pci_req1[] = {GPIO29};
-+static const unsigned danube_pins_pci_req2[] = {GPIO31};
-+static const unsigned danube_pins_pci_req3[] = {GPIO3};
-+
-+static const struct ltq_pin_group danube_grps[] = {
-+ GRP_MUX("exin0", EXIN, danube_pins_exin0),
-+ GRP_MUX("exin1", EXIN, danube_pins_exin1),
-+ GRP_MUX("exin2", EXIN, danube_pins_exin2),
-+ GRP_MUX("jtag", JTAG, danube_pins_jtag),
-+ GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23),
-+ GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24),
-+ GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25),
-+ GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk),
-+ GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1),
-+ GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait),
-+ GRP_MUX("nand ale", EBU, danube_pins_nand_ale),
-+ GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1),
-+ GRP_MUX("nand cle", EBU, danube_pins_nand_cle),
-+ GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */
-+ GRP_MUX("spi_di", SPI, danube_pins_spi_di),
-+ GRP_MUX("spi_do", SPI, danube_pins_spi_do),
-+ GRP_MUX("spi_clk", SPI, danube_pins_spi_clk),
-+ GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1),
-+ GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2),
-+ GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3),
-+ GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4),
-+ GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5),
-+ GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6),
-+ GRP_MUX("asc0", ASC, danube_pins_asc0),
-+ GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts),
-+ GRP_MUX("stp", STP, danube_pins_stp),
-+ GRP_MUX("nmi", NMI, danube_pins_nmi),
-+ GRP_MUX("gpt1", GPT, danube_pins_gpt1),
-+ GRP_MUX("gpt2", GPT, danube_pins_gpt2),
-+ GRP_MUX("gpt3", GPT, danube_pins_gpt3),
-+ GRP_MUX("clkout0", CGU, danube_pins_clkout0),
-+ GRP_MUX("clkout1", CGU, danube_pins_clkout1),
-+ GRP_MUX("clkout2", CGU, danube_pins_clkout2),
-+ GRP_MUX("clkout3", CGU, danube_pins_clkout3),
-+ GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1),
-+ GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2),
-+ GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3),
-+ GRP_MUX("req1", PCI, danube_pins_pci_req1),
-+ GRP_MUX("req2", PCI, danube_pins_pci_req2),
-+ GRP_MUX("req3", PCI, danube_pins_pci_req3),
-+ GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0),
-+ GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1),
-+};
-+
-+static const char * const danube_pci_grps[] = {"gnt1", "gnt2",
-+ "gnt3", "req1",
-+ "req2", "req3"};
-+static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */
-+ "spi_di", "spi_do",
-+ "spi_clk", "spi_cs1",
-+ "spi_cs2", "spi_cs3",
-+ "spi_cs4", "spi_cs5",
-+ "spi_cs6"};
-+static const char * const danube_cgu_grps[] = {"clkout0", "clkout1",
-+ "clkout2", "clkout3"};
-+static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24",
-+ "ebu a25", "ebu cs1",
-+ "ebu wait", "ebu clk",
-+ "nand ale", "nand cs1",
-+ "nand cle"};
-+static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"};
-+static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"};
-+static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
-+static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"};
-+static const char * const danube_jtag_grps[] = {"jtag"};
-+static const char * const danube_stp_grps[] = {"stp"};
-+static const char * const danube_nmi_grps[] = {"nmi"};
-+
-+static const struct ltq_pmx_func danube_funcs[] = {
-+ {"spi", ARRAY_AND_SIZE(danube_spi_grps)},
-+ {"asc", ARRAY_AND_SIZE(danube_asc_grps)},
-+ {"cgu", ARRAY_AND_SIZE(danube_cgu_grps)},
-+ {"jtag", ARRAY_AND_SIZE(danube_jtag_grps)},
-+ {"exin", ARRAY_AND_SIZE(danube_exin_grps)},
-+ {"stp", ARRAY_AND_SIZE(danube_stp_grps)},
-+ {"gpt", ARRAY_AND_SIZE(danube_gpt_grps)},
-+ {"nmi", ARRAY_AND_SIZE(danube_nmi_grps)},
-+ {"pci", ARRAY_AND_SIZE(danube_pci_grps)},
-+ {"ebu", ARRAY_AND_SIZE(danube_ebu_grps)},
-+ {"dfe", ARRAY_AND_SIZE(danube_dfe_grps)},
-+};
-+
-+/* --------- xrx100 related code --------- */
-+#define XRX100_MAX_PIN 56
-+
-+static const struct ltq_mfp_pin xrx100_mfp[] = {
-+ /* pin f0 f1 f2 f3 */
-+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM),
-+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN),
-+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE),
-+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI),
-+ MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC),
-+ MFP_XWAY(GPIO5, GPIO, STP, NONE, DFE),
-+ MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC),
-+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, NONE),
-+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE),
-+ MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN),
-+ MFP_XWAY(GPIO10, GPIO, ASC, SPI, EXIN),
-+ MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI),
-+ MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD),
-+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE),
-+ MFP_XWAY(GPIO14, GPIO, CGU, NONE, NONE),
-+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD),
-+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU),
-+ MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU),
-+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT),
-+ MFP_XWAY(GPIO22, GPIO, SPI, NONE, EBU),
-+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP),
-+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI),
-+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC),
-+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO),
-+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC),
-+ MFP_XWAY(GPIO28, GPIO, GPT, NONE, SDIO),
-+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, NONE),
-+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE),
-+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE),
-+ MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU),
-+ MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU),
-+ MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE),
-+ MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE),
-+ MFP_XWAY(GPIO36, GPIO, SIN, SSI, NONE),
-+ MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE),
-+ MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE),
-+ MFP_XWAY(GPIO39, GPIO, NONE, EXIN, NONE),
-+ MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE),
-+ MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE),
-+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO44, GPIO, MII, SIN, NONE),
-+ MFP_XWAY(GPIO45, GPIO, MII, NONE, SIN),
-+ MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN),
-+ MFP_XWAY(GPIO47, GPIO, MII, NONE, SIN),
-+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE),
-+};
-+
-+static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
-+
-+static const unsigned xrx100_pins_exin0[] = {GPIO0};
-+static const unsigned xrx100_pins_exin1[] = {GPIO1};
-+static const unsigned xrx100_pins_exin2[] = {GPIO2};
-+static const unsigned xrx100_pins_exin3[] = {GPIO39};
-+static const unsigned xrx100_pins_exin4[] = {GPIO10};
-+static const unsigned xrx100_pins_exin5[] = {GPIO9};
-+
-+static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12};
-+static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
-+static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6};
-+static const unsigned xrx100_pins_nmi[] = {GPIO8};
-+static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43};
-+
-+static const unsigned xrx100_pins_dfe_led0[] = {GPIO4};
-+static const unsigned xrx100_pins_dfe_led1[] = {GPIO5};
-+
-+static const unsigned xrx100_pins_ebu_a24[] = {GPIO13};
-+static const unsigned xrx100_pins_ebu_clk[] = {GPIO21};
-+static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23};
-+static const unsigned xrx100_pins_ebu_a23[] = {GPIO24};
-+static const unsigned xrx100_pins_ebu_wait[] = {GPIO26};
-+static const unsigned xrx100_pins_ebu_a25[] = {GPIO31};
-+
-+static const unsigned xrx100_pins_nand_ale[] = {GPIO13};
-+static const unsigned xrx100_pins_nand_cs1[] = {GPIO23};
-+static const unsigned xrx100_pins_nand_cle[] = {GPIO24};
-+static const unsigned xrx100_pins_nand_rdy[] = {GPIO48};
-+static const unsigned xrx100_pins_nand_rd[] = {GPIO49};
-+
-+static const unsigned xrx100_pins_spi_di[] = {GPIO16};
-+static const unsigned xrx100_pins_spi_do[] = {GPIO17};
-+static const unsigned xrx100_pins_spi_clk[] = {GPIO18};
-+static const unsigned xrx100_pins_spi_cs1[] = {GPIO15};
-+static const unsigned xrx100_pins_spi_cs2[] = {GPIO22};
-+static const unsigned xrx100_pins_spi_cs3[] = {GPIO13};
-+static const unsigned xrx100_pins_spi_cs4[] = {GPIO10};
-+static const unsigned xrx100_pins_spi_cs5[] = {GPIO9};
-+static const unsigned xrx100_pins_spi_cs6[] = {GPIO11};
-+
-+static const unsigned xrx100_pins_gpt1[] = {GPIO28};
-+static const unsigned xrx100_pins_gpt2[] = {GPIO21};
-+static const unsigned xrx100_pins_gpt3[] = {GPIO6};
-+
-+static const unsigned xrx100_pins_clkout0[] = {GPIO8};
-+static const unsigned xrx100_pins_clkout1[] = {GPIO7};
-+static const unsigned xrx100_pins_clkout2[] = {GPIO3};
-+static const unsigned xrx100_pins_clkout3[] = {GPIO2};
-+
-+static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30};
-+static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23};
-+static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19};
-+static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38};
-+static const unsigned xrx100_pins_pci_req1[] = {GPIO29};
-+static const unsigned xrx100_pins_pci_req2[] = {GPIO31};
-+static const unsigned xrx100_pins_pci_req3[] = {GPIO3};
-+static const unsigned xrx100_pins_pci_req4[] = {GPIO37};
-+
-+static const struct ltq_pin_group xrx100_grps[] = {
-+ GRP_MUX("exin0", EXIN, xrx100_pins_exin0),
-+ GRP_MUX("exin1", EXIN, xrx100_pins_exin1),
-+ GRP_MUX("exin2", EXIN, xrx100_pins_exin2),
-+ GRP_MUX("exin3", EXIN, xrx100_pins_exin3),
-+ GRP_MUX("exin4", EXIN, xrx100_pins_exin4),
-+ GRP_MUX("exin5", EXIN, xrx100_pins_exin5),
-+ GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23),
-+ GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24),
-+ GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25),
-+ GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk),
-+ GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1),
-+ GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait),
-+ GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale),
-+ GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1),
-+ GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle),
-+ GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy),
-+ GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd),
-+ GRP_MUX("spi_di", SPI, xrx100_pins_spi_di),
-+ GRP_MUX("spi_do", SPI, xrx100_pins_spi_do),
-+ GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk),
-+ GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1),
-+ GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2),
-+ GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3),
-+ GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4),
-+ GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5),
-+ GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6),
-+ GRP_MUX("asc0", ASC, xrx100_pins_asc0),
-+ GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts),
-+ GRP_MUX("stp", STP, xrx100_pins_stp),
-+ GRP_MUX("nmi", NMI, xrx100_pins_nmi),
-+ GRP_MUX("gpt1", GPT, xrx100_pins_gpt1),
-+ GRP_MUX("gpt2", GPT, xrx100_pins_gpt2),
-+ GRP_MUX("gpt3", GPT, xrx100_pins_gpt3),
-+ GRP_MUX("clkout0", CGU, xrx100_pins_clkout0),
-+ GRP_MUX("clkout1", CGU, xrx100_pins_clkout1),
-+ GRP_MUX("clkout2", CGU, xrx100_pins_clkout2),
-+ GRP_MUX("clkout3", CGU, xrx100_pins_clkout3),
-+ GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1),
-+ GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2),
-+ GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3),
-+ GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4),
-+ GRP_MUX("req1", PCI, xrx100_pins_pci_req1),
-+ GRP_MUX("req2", PCI, xrx100_pins_pci_req2),
-+ GRP_MUX("req3", PCI, xrx100_pins_pci_req3),
-+ GRP_MUX("req4", PCI, xrx100_pins_pci_req4),
-+ GRP_MUX("mdio", MDIO, xrx100_pins_mdio),
-+ GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0),
-+ GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1),
-+};
-+
-+static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2",
-+ "gnt3", "gnt4",
-+ "req1", "req2",
-+ "req3", "req4"};
-+static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do",
-+ "spi_clk", "spi_cs1",
-+ "spi_cs2", "spi_cs3",
-+ "spi_cs4", "spi_cs5",
-+ "spi_cs6"};
-+static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1",
-+ "clkout2", "clkout3"};
-+static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24",
-+ "ebu a25", "ebu cs1",
-+ "ebu wait", "ebu clk",
-+ "nand ale", "nand cs1",
-+ "nand cle", "nand rdy",
-+ "nand rd"};
-+static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2",
-+ "exin3", "exin4", "exin5"};
-+static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
-+static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"};
-+static const char * const xrx100_stp_grps[] = {"stp"};
-+static const char * const xrx100_nmi_grps[] = {"nmi"};
-+static const char * const xrx100_mdio_grps[] = {"mdio"};
-+static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"};
-+
-+static const struct ltq_pmx_func xrx100_funcs[] = {
-+ {"spi", ARRAY_AND_SIZE(xrx100_spi_grps)},
-+ {"asc", ARRAY_AND_SIZE(xrx100_asc_grps)},
-+ {"cgu", ARRAY_AND_SIZE(xrx100_cgu_grps)},
-+ {"exin", ARRAY_AND_SIZE(xrx100_exin_grps)},
-+ {"stp", ARRAY_AND_SIZE(xrx100_stp_grps)},
-+ {"gpt", ARRAY_AND_SIZE(xrx100_gpt_grps)},
-+ {"nmi", ARRAY_AND_SIZE(xrx100_nmi_grps)},
-+ {"pci", ARRAY_AND_SIZE(xrx100_pci_grps)},
-+ {"ebu", ARRAY_AND_SIZE(xrx100_ebu_grps)},
-+ {"mdio", ARRAY_AND_SIZE(xrx100_mdio_grps)},
-+ {"dfe", ARRAY_AND_SIZE(xrx100_dfe_grps)},
-+};
-+
-+/* --------- xrx200 related code --------- */
-+#define XRX200_MAX_PIN 50
-+
-+static const struct ltq_mfp_pin xrx200_mfp[] = {
-+ /* pin f0 f1 f2 f3 */
-+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM),
-+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN),
-+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY),
-+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI),
-+ MFP_XWAY(GPIO4, GPIO, STP, DFE, USIF),
-+ MFP_XWAY(GPIO5, GPIO, STP, GPHY, DFE),
-+ MFP_XWAY(GPIO6, GPIO, STP, GPT, USIF),
-+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, GPHY),
-+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE),
-+ MFP_XWAY(GPIO9, GPIO, USIF, SPI, EXIN),
-+ MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN),
-+ MFP_XWAY(GPIO11, GPIO, USIF, CBUS, SPI),
-+ MFP_XWAY(GPIO12, GPIO, USIF, CBUS, MCD),
-+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE),
-+ MFP_XWAY(GPIO14, GPIO, CGU, CBUS, USIF),
-+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD),
-+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE),
-+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU),
-+ MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU),
-+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT),
-+ MFP_XWAY(GPIO22, GPIO, SPI, CGU, EBU),
-+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP),
-+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI),
-+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, USIF),
-+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO),
-+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, USIF),
-+ MFP_XWAY(GPIO28, GPIO, GPT, PCI, SDIO),
-+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, EXIN),
-+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE),
-+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE),
-+ MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU),
-+ MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU),
-+ MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE),
-+ MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE),
-+ MFP_XWAY(GPIO36, GPIO, SIN, SSI, EXIN),
-+ MFP_XWAY(GPIO37, GPIO, USIF, NONE, PCI),
-+ MFP_XWAY(GPIO38, GPIO, PCI, USIF, NONE),
-+ MFP_XWAY(GPIO39, GPIO, USIF, EXIN, NONE),
-+ MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE),
-+ MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE),
-+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY),
-+ MFP_XWAY(GPIO45, GPIO, MII, GPHY, SIN),
-+ MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN),
-+ MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN),
-+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE),
-+};
-+
-+static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
-+
-+static const unsigned xrx200_pins_exin0[] = {GPIO0};
-+static const unsigned xrx200_pins_exin1[] = {GPIO1};
-+static const unsigned xrx200_pins_exin2[] = {GPIO2};
-+static const unsigned xrx200_pins_exin3[] = {GPIO39};
-+static const unsigned xrx200_pins_exin4[] = {GPIO10};
-+static const unsigned xrx200_pins_exin5[] = {GPIO9};
-+
-+static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11};
-+static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12};
-+static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9};
-+static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10};
-+static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4};
-+static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6};
-+static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25};
-+static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27};
-+
-+static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11};
-+static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12};
-+static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38};
-+static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37};
-+static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39};
-+static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14};
-+
-+static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6};
-+static const unsigned xrx200_pins_nmi[] = {GPIO8};
-+static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43};
-+
-+static const unsigned xrx200_pins_dfe_led0[] = {GPIO4};
-+static const unsigned xrx200_pins_dfe_led1[] = {GPIO5};
-+
-+static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5};
-+static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7};
-+static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2};
-+static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44};
-+static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45};
-+static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47};
-+
-+static const unsigned xrx200_pins_ebu_a24[] = {GPIO13};
-+static const unsigned xrx200_pins_ebu_clk[] = {GPIO21};
-+static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23};
-+static const unsigned xrx200_pins_ebu_a23[] = {GPIO24};
-+static const unsigned xrx200_pins_ebu_wait[] = {GPIO26};
-+static const unsigned xrx200_pins_ebu_a25[] = {GPIO31};
-+
-+static const unsigned xrx200_pins_nand_ale[] = {GPIO13};
-+static const unsigned xrx200_pins_nand_cs1[] = {GPIO23};
-+static const unsigned xrx200_pins_nand_cle[] = {GPIO24};
-+static const unsigned xrx200_pins_nand_rdy[] = {GPIO48};
-+static const unsigned xrx200_pins_nand_rd[] = {GPIO49};
-+
-+static const unsigned xrx200_pins_spi_di[] = {GPIO16};
-+static const unsigned xrx200_pins_spi_do[] = {GPIO17};
-+static const unsigned xrx200_pins_spi_clk[] = {GPIO18};
-+static const unsigned xrx200_pins_spi_cs1[] = {GPIO15};
-+static const unsigned xrx200_pins_spi_cs2[] = {GPIO22};
-+static const unsigned xrx200_pins_spi_cs3[] = {GPIO13};
-+static const unsigned xrx200_pins_spi_cs4[] = {GPIO10};
-+static const unsigned xrx200_pins_spi_cs5[] = {GPIO9};
-+static const unsigned xrx200_pins_spi_cs6[] = {GPIO11};
-+
-+static const unsigned xrx200_pins_gpt1[] = {GPIO28};
-+static const unsigned xrx200_pins_gpt2[] = {GPIO21};
-+static const unsigned xrx200_pins_gpt3[] = {GPIO6};
-+
-+static const unsigned xrx200_pins_clkout0[] = {GPIO8};
-+static const unsigned xrx200_pins_clkout1[] = {GPIO7};
-+static const unsigned xrx200_pins_clkout2[] = {GPIO3};
-+static const unsigned xrx200_pins_clkout3[] = {GPIO2};
-+
-+static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28};
-+static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23};
-+static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19};
-+static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38};
-+static const unsigned xrx200_pins_pci_req1[] = {GPIO29};
-+static const unsigned xrx200_pins_pci_req2[] = {GPIO31};
-+static const unsigned xrx200_pins_pci_req3[] = {GPIO3};
-+static const unsigned xrx200_pins_pci_req4[] = {GPIO37};
-+
-+static const struct ltq_pin_group xrx200_grps[] = {
-+ GRP_MUX("exin0", EXIN, xrx200_pins_exin0),
-+ GRP_MUX("exin1", EXIN, xrx200_pins_exin1),
-+ GRP_MUX("exin2", EXIN, xrx200_pins_exin2),
-+ GRP_MUX("exin3", EXIN, xrx200_pins_exin3),
-+ GRP_MUX("exin4", EXIN, xrx200_pins_exin4),
-+ GRP_MUX("exin5", EXIN, xrx200_pins_exin5),
-+ GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23),
-+ GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24),
-+ GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25),
-+ GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk),
-+ GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1),
-+ GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait),
-+ GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale),
-+ GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1),
-+ GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle),
-+ GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy),
-+ GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd),
-+ GRP_MUX("spi_di", SPI, xrx200_pins_spi_di),
-+ GRP_MUX("spi_do", SPI, xrx200_pins_spi_do),
-+ GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk),
-+ GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1),
-+ GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2),
-+ GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3),
-+ GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4),
-+ GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
-+ GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
-+ GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
-+ GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
-+ GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
-+ GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
-+ GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),
-+ GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr),
-+ GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd),
-+ GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri),
-+ GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di),
-+ GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do),
-+ GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk),
-+ GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0),
-+ GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1),
-+ GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2),
-+ GRP_MUX("stp", STP, xrx200_pins_stp),
-+ GRP_MUX("nmi", NMI, xrx200_pins_nmi),
-+ GRP_MUX("gpt1", GPT, xrx200_pins_gpt1),
-+ GRP_MUX("gpt2", GPT, xrx200_pins_gpt2),
-+ GRP_MUX("gpt3", GPT, xrx200_pins_gpt3),
-+ GRP_MUX("clkout0", CGU, xrx200_pins_clkout0),
-+ GRP_MUX("clkout1", CGU, xrx200_pins_clkout1),
-+ GRP_MUX("clkout2", CGU, xrx200_pins_clkout2),
-+ GRP_MUX("clkout3", CGU, xrx200_pins_clkout3),
-+ GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1),
-+ GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2),
-+ GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3),
-+ GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4),
-+ GRP_MUX("req1", PCI, xrx200_pins_pci_req1),
-+ GRP_MUX("req2", PCI, xrx200_pins_pci_req2),
-+ GRP_MUX("req3", PCI, xrx200_pins_pci_req3),
-+ GRP_MUX("req4", PCI, xrx200_pins_pci_req4),
-+ GRP_MUX("mdio", MDIO, xrx200_pins_mdio),
-+ GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0),
-+ GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1),
-+ GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0),
-+ GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1),
-+ GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2),
-+ GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0),
-+ GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1),
-+ GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2),
-+};
-+
-+static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2",
-+ "gnt3", "gnt4",
-+ "req1", "req2",
-+ "req3", "req4"};
-+static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do",
-+ "spi_clk", "spi_cs1",
-+ "spi_cs2", "spi_cs3",
-+ "spi_cs4", "spi_cs5",
-+ "spi_cs6"};
-+static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1",
-+ "clkout2", "clkout3"};
-+static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24",
-+ "ebu a25", "ebu cs1",
-+ "ebu wait", "ebu clk",
-+ "nand ale", "nand cs1",
-+ "nand cle", "nand rdy",
-+ "nand rd"};
-+static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2",
-+ "exin3", "exin4", "exin5"};
-+static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
-+static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx",
-+ "usif uart_rts", "usif uart_cts",
-+ "usif uart_dtr", "usif uart_dsr",
-+ "usif uart_dcd", "usif uart_ri",
-+ "usif spi_di", "usif spi_do",
-+ "usif spi_clk", "usif spi_cs0",
-+ "usif spi_cs1", "usif spi_cs2"};
-+static const char * const xrx200_stp_grps[] = {"stp"};
-+static const char * const xrx200_nmi_grps[] = {"nmi"};
-+static const char * const xrx200_mdio_grps[] = {"mdio"};
-+static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"};
-+static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1",
-+ "gphy0 led2", "gphy1 led0",
-+ "gphy1 led1", "gphy1 led2"};
-+
-+static const struct ltq_pmx_func xrx200_funcs[] = {
-+ {"spi", ARRAY_AND_SIZE(xrx200_spi_grps)},
-+ {"usif", ARRAY_AND_SIZE(xrx200_usif_grps)},
-+ {"cgu", ARRAY_AND_SIZE(xrx200_cgu_grps)},
-+ {"exin", ARRAY_AND_SIZE(xrx200_exin_grps)},
-+ {"stp", ARRAY_AND_SIZE(xrx200_stp_grps)},
-+ {"gpt", ARRAY_AND_SIZE(xrx200_gpt_grps)},
-+ {"nmi", ARRAY_AND_SIZE(xrx200_nmi_grps)},
-+ {"pci", ARRAY_AND_SIZE(xrx200_pci_grps)},
-+ {"ebu", ARRAY_AND_SIZE(xrx200_ebu_grps)},
-+ {"mdio", ARRAY_AND_SIZE(xrx200_mdio_grps)},
-+ {"dfe", ARRAY_AND_SIZE(xrx200_dfe_grps)},
-+ {"gphy", ARRAY_AND_SIZE(xrx200_gphy_grps)},
-+};
-+
-+/* --------- xrx300 related code --------- */
-+#define XRX300_MAX_PIN 64
-+
-+static const struct ltq_mfp_pin xrx300_mfp[] = {
-+ /* pin f0 f1 f2 f3 */
-+ MFP_XWAY(GPIO0, GPIO, EXIN, EPHY, NONE),
-+ MFP_XWAY(GPIO1, GPIO, NONE, EXIN, NONE),
-+ MFP_XWAY(GPIO2, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO3, GPIO, CGU, NONE, NONE),
-+ MFP_XWAY(GPIO4, GPIO, STP, DFE, NONE),
-+ MFP_XWAY(GPIO5, GPIO, STP, EPHY, DFE),
-+ MFP_XWAY(GPIO6, GPIO, STP, NONE, NONE),
-+ MFP_XWAY(GPIO7, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO8, GPIO, CGU, GPHY, EPHY),
-+ MFP_XWAY(GPIO9, GPIO, WIFI, NONE, EXIN),
-+ MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN),
-+ MFP_XWAY(GPIO11, GPIO, USIF, WIFI, SPI),
-+ MFP_XWAY(GPIO12, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO13, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO14, GPIO, CGU, USIF, EPHY),
-+ MFP_XWAY(GPIO15, GPIO, SPI, NONE, MCD),
-+ MFP_XWAY(GPIO16, GPIO, SPI, EXIN, NONE),
-+ MFP_XWAY(GPIO17, GPIO, SPI, NONE, NONE),
-+ MFP_XWAY(GPIO18, GPIO, SPI, NONE, NONE),
-+ MFP_XWAY(GPIO19, GPIO, USIF, NONE, EPHY),
-+ MFP_XWAY(GPIO20, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO21, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO22, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO23, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO24, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO25, GPIO, TDM, NONE, NONE),
-+ MFP_XWAY(GPIO26, GPIO, TDM, NONE, NONE),
-+ MFP_XWAY(GPIO27, GPIO, TDM, NONE, NONE),
-+ MFP_XWAY(GPIO28, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO29, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO30, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO31, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO32, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO33, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO34, GPIO, NONE, SSI, NONE),
-+ MFP_XWAY(GPIO35, GPIO, NONE, SSI, NONE),
-+ MFP_XWAY(GPIO36, GPIO, NONE, SSI, NONE),
-+ MFP_XWAY(GPIO37, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO38, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO39, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO40, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO41, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
-+ MFP_XWAY(GPIO44, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO45, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO46, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO47, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO50, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO51, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO52, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO53, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO54, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO55, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO56, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO57, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO58, GPIO, EBU, TDM, NONE),
-+ MFP_XWAY(GPIO59, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO60, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO61, GPIO, EBU, NONE, NONE),
-+ MFP_XWAY(GPIO62, NONE, NONE, NONE, NONE),
-+ MFP_XWAY(GPIO63, NONE, NONE, NONE, NONE),
-+};
-+
-+static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9};
-+
-+static const unsigned xrx300_pins_exin0[] = {GPIO0};
-+static const unsigned xrx300_pins_exin1[] = {GPIO1};
-+static const unsigned xrx300_pins_exin2[] = {GPIO16};
-+/* EXIN3 is not available on xrX300 */
-+static const unsigned xrx300_pins_exin4[] = {GPIO10};
-+static const unsigned xrx300_pins_exin5[] = {GPIO9};
-+
-+static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11};
-+static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10};
-+
-+static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11};
-+static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10};
-+static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19};
-+static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14};
-+
-+static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6};
-+static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43};
-+
-+static const unsigned xrx300_pins_dfe_led0[] = {GPIO4};
-+static const unsigned xrx300_pins_dfe_led1[] = {GPIO5};
-+
-+static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5};
-+static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8};
-+static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14};
-+static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19};
-+
-+static const unsigned xrx300_pins_nand_ale[] = {GPIO13};
-+static const unsigned xrx300_pins_nand_cs1[] = {GPIO23};
-+static const unsigned xrx300_pins_nand_cle[] = {GPIO24};
-+static const unsigned xrx300_pins_nand_rdy[] = {GPIO48};
-+static const unsigned xrx300_pins_nand_rd[] = {GPIO49};
-+static const unsigned xrx300_pins_nand_d1[] = {GPIO50};
-+static const unsigned xrx300_pins_nand_d0[] = {GPIO51};
-+static const unsigned xrx300_pins_nand_d2[] = {GPIO52};
-+static const unsigned xrx300_pins_nand_d7[] = {GPIO53};
-+static const unsigned xrx300_pins_nand_d6[] = {GPIO54};
-+static const unsigned xrx300_pins_nand_d5[] = {GPIO55};
-+static const unsigned xrx300_pins_nand_d4[] = {GPIO56};
-+static const unsigned xrx300_pins_nand_d3[] = {GPIO57};
-+static const unsigned xrx300_pins_nand_cs0[] = {GPIO58};
-+static const unsigned xrx300_pins_nand_wr[] = {GPIO59};
-+static const unsigned xrx300_pins_nand_wp[] = {GPIO60};
-+static const unsigned xrx300_pins_nand_se[] = {GPIO61};
-+
-+static const unsigned xrx300_pins_spi_di[] = {GPIO16};
-+static const unsigned xrx300_pins_spi_do[] = {GPIO17};
-+static const unsigned xrx300_pins_spi_clk[] = {GPIO18};
-+static const unsigned xrx300_pins_spi_cs1[] = {GPIO15};
-+/* SPI_CS2 is not available on xrX300 */
-+/* SPI_CS3 is not available on xrX300 */
-+static const unsigned xrx300_pins_spi_cs4[] = {GPIO10};
-+/* SPI_CS5 is not available on xrX300 */
-+static const unsigned xrx300_pins_spi_cs6[] = {GPIO11};
-+
-+/* CLKOUT0 is not available on xrX300 */
-+/* CLKOUT1 is not available on xrX300 */
-+static const unsigned xrx300_pins_clkout2[] = {GPIO3};
-+
-+static const struct ltq_pin_group xrx300_grps[] = {
-+ GRP_MUX("exin0", EXIN, xrx300_pins_exin0),
-+ GRP_MUX("exin1", EXIN, xrx300_pins_exin1),
-+ GRP_MUX("exin2", EXIN, xrx300_pins_exin2),
-+ GRP_MUX("exin4", EXIN, xrx300_pins_exin4),
-+ GRP_MUX("exin5", EXIN, xrx300_pins_exin5),
-+ GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale),
-+ GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1),
-+ GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle),
-+ GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy),
-+ GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd),
-+ GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1),
-+ GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0),
-+ GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2),
-+ GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7),
-+ GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6),
-+ GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5),
-+ GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4),
-+ GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3),
-+ GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0),
-+ GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr),
-+ GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp),
-+ GRP_MUX("nand se", EBU, xrx300_pins_nand_se),
-+ GRP_MUX("spi_di", SPI, xrx300_pins_spi_di),
-+ GRP_MUX("spi_do", SPI, xrx300_pins_spi_do),
-+ GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk),
-+ GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1),
-+ GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4),
-+ GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6),
-+ GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx),
-+ GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx),
-+ GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di),
-+ GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do),
-+ GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk),
-+ GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0),
-+ GRP_MUX("stp", STP, xrx300_pins_stp),
-+ GRP_MUX("clkout2", CGU, xrx300_pins_clkout2),
-+ GRP_MUX("mdio", MDIO, xrx300_pins_mdio),
-+ GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0),
-+ GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1),
-+ GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0),
-+ GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1),
-+ GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0),
-+ GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1),
-+};
-+
-+static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do",
-+ "spi_clk", "spi_cs1",
-+ "spi_cs4", "spi_cs6"};
-+static const char * const xrx300_cgu_grps[] = {"clkout2"};
-+static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1",
-+ "nand cle", "nand rdy",
-+ "nand rd", "nand d1",
-+ "nand d0", "nand d2",
-+ "nand d7", "nand d6",
-+ "nand d5", "nand d4",
-+ "nand d3", "nand cs0",
-+ "nand wr", "nand wp",
-+ "nand se"};
-+static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2",
-+ "exin4", "exin5"};
-+static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx",
-+ "usif spi_di", "usif spi_do",
-+ "usif spi_clk", "usif spi_cs0"};
-+static const char * const xrx300_stp_grps[] = {"stp"};
-+static const char * const xrx300_mdio_grps[] = {"mdio"};
-+static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"};
-+static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1",
-+ "ephy1 led0", "ephy1 led1"};
-+
-+static const struct ltq_pmx_func xrx300_funcs[] = {
-+ {"spi", ARRAY_AND_SIZE(xrx300_spi_grps)},
-+ {"usif", ARRAY_AND_SIZE(xrx300_usif_grps)},
-+ {"cgu", ARRAY_AND_SIZE(xrx300_cgu_grps)},
-+ {"exin", ARRAY_AND_SIZE(xrx300_exin_grps)},
-+ {"stp", ARRAY_AND_SIZE(xrx300_stp_grps)},
-+ {"ebu", ARRAY_AND_SIZE(xrx300_ebu_grps)},
-+ {"mdio", ARRAY_AND_SIZE(xrx300_mdio_grps)},
-+ {"dfe", ARRAY_AND_SIZE(xrx300_dfe_grps)},
-+ {"ephy", ARRAY_AND_SIZE(xrx300_gphy_grps)},
-+};
-+
- /* --------- pinconf related code --------- */
- static int xway_pinconf_get(struct pinctrl_dev *pctldev,
- unsigned pin,
-@@ -729,10 +1616,7 @@ static struct gpio_chip xway_chip = {
-
-
- /* --------- register the pinctrl layer --------- */
--static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
--static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0};
--
--static struct pinctrl_xway_soc {
-+struct pinctrl_xway_soc {
- int pin_count;
- const struct ltq_mfp_pin *mfp;
- const struct ltq_pin_group *grps;
-@@ -741,22 +1625,54 @@ static struct pinctrl_xway_soc {
- unsigned int num_funcs;
- const unsigned *exin;
- unsigned int num_exin;
--} soc_cfg[] = {
-- /* legacy xway */
-- {XWAY_MAX_PIN, xway_mfp,
-- xway_grps, ARRAY_SIZE(xway_grps),
-- danube_funcs, ARRAY_SIZE(danube_funcs),
-- xway_exin_pin_map, 3},
-- /* xway xr9 series */
-- {XR9_MAX_PIN, xway_mfp,
-- xway_grps, ARRAY_SIZE(xway_grps),
-- xrx_funcs, ARRAY_SIZE(xrx_funcs),
-- xway_exin_pin_map, 6},
-- /* xway ase series */
-- {XWAY_MAX_PIN, ase_mfp,
-- ase_grps, ARRAY_SIZE(ase_grps),
-- ase_funcs, ARRAY_SIZE(ase_funcs),
-- ase_exin_pins_map, 3},
-+};
-+
-+/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */
-+static struct pinctrl_xway_soc xr9_pinctrl = {
-+ XR9_MAX_PIN, xway_mfp,
-+ xway_grps, ARRAY_SIZE(xway_grps),
-+ xrx_funcs, ARRAY_SIZE(xrx_funcs),
-+ xway_exin_pin_map, 6
-+};
-+
-+/* XWAY AMAZON Family */
-+static struct pinctrl_xway_soc ase_pinctrl = {
-+ ASE_MAX_PIN, ase_mfp,
-+ ase_grps, ARRAY_SIZE(ase_grps),
-+ ase_funcs, ARRAY_SIZE(ase_funcs),
-+ ase_exin_pin_map, 3
-+};
-+
-+/* XWAY DANUBE Family */
-+static struct pinctrl_xway_soc danube_pinctrl = {
-+ DANUBE_MAX_PIN, danube_mfp,
-+ danube_grps, ARRAY_SIZE(danube_grps),
-+ danube_funcs, ARRAY_SIZE(danube_funcs),
-+ danube_exin_pin_map, 3
-+};
-+
-+/* XWAY xRX100 Family */
-+static struct pinctrl_xway_soc xrx100_pinctrl = {
-+ XRX100_MAX_PIN, xrx100_mfp,
-+ xrx100_grps, ARRAY_SIZE(xrx100_grps),
-+ xrx100_funcs, ARRAY_SIZE(xrx100_funcs),
-+ xrx100_exin_pin_map, 6
-+};
-+
-+/* XWAY xRX200 Family */
-+static struct pinctrl_xway_soc xrx200_pinctrl = {
-+ XRX200_MAX_PIN, xrx200_mfp,
-+ xrx200_grps, ARRAY_SIZE(xrx200_grps),
-+ xrx200_funcs, ARRAY_SIZE(xrx200_funcs),
-+ xrx200_exin_pin_map, 6
-+};
-+
-+/* XWAY xRX300 Family */
-+static struct pinctrl_xway_soc xrx300_pinctrl = {
-+ XRX300_MAX_PIN, xrx300_mfp,
-+ xrx300_grps, ARRAY_SIZE(xrx300_grps),
-+ xrx300_funcs, ARRAY_SIZE(xrx300_funcs),
-+ xrx300_exin_pin_map, 5
- };
-
- static struct pinctrl_gpio_range xway_gpio_range = {
-@@ -765,9 +1681,14 @@ static struct pinctrl_gpio_range xway_gp
- };
-
- static const struct of_device_id xway_match[] = {
-- { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]},
-- { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]},
-- { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]},
-+ { .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/
-+ { .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/
-+ { .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/
-+ { .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl},
-+ { .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl},
-+ { .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl},
-+ { .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl},
-+ { .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl},
- {},
- };
- MODULE_DEVICE_TABLE(of, xway_match);
-@@ -789,7 +1710,7 @@ static int pinmux_xway_probe(struct plat
- if (match)
- xway_soc = (const struct pinctrl_xway_soc *) match->data;
- else
-- xway_soc = &soc_cfg[0];
-+ xway_soc = &danube_pinctrl;
-
- /* find out how many pads we have */
- xway_chip.ngpio = xway_soc->pin_count;
diff --git a/target/linux/lantiq/patches-4.1/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch b/target/linux/lantiq/patches-4.1/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
deleted file mode 100644
index a5f92ee58e..0000000000
--- a/target/linux/lantiq/patches-4.1/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 57b588c950b7e04e0f22393ad439299ba4fda9c3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 26 Nov 2015 11:00:09 +0100
-Subject: [PATCH] pinctrl/lantiq: Fix GPIO Setup of GPIO Port3
-
-Some special handling of GPIO Port 3 is needed because of
-some hardware thingofabob.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Martin Schiller <mschiller@tdt.de>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-xway.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -1570,6 +1570,10 @@ static int xway_gpio_dir_out(struct gpio
- {
- struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-
-+ if (PORT(pin) == PORT3)
-+ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
-+ else
-+ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
- gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
- xway_gpio_set(chip, pin, val);
-
diff --git a/target/linux/lantiq/patches-4.1/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch b/target/linux/lantiq/patches-4.1/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
deleted file mode 100644
index 78b5cba7f9..0000000000
--- a/target/linux/lantiq/patches-4.1/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From c9f294ff6584782d20b4a766901a9cff7398bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Jan 2016 22:27:57 +0100
-Subject: [PATCH] pinctrl: lantiq: 2 pins have the wrong mux list
-
-The latest vendor SDK contained this patch.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-xway.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -160,10 +160,10 @@ static const struct ltq_mfp_pin xway_mfp
- MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE),
- MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
- MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
-- MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY),
-+ MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY),
- MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN),
- MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN),
-- MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN),
-+ MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN),
- MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE),
- MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE),
- MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE),
diff --git a/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch b/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch
deleted file mode 100644
index 052b232e6b..0000000000
--- a/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch
+++ /dev/null
@@ -1,1133 +0,0 @@
-From 0175fc559debc22fe8d17e9b8ffd1452e0a4667d Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 16 Dec 2014 15:40:32 +0100
-Subject: [PATCH 1/2] spi: add support for Lantiq SPI controller
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
----
- drivers/spi/Kconfig | 7 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-lantiq.c | 1089 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 1097 insertions(+)
- create mode 100644 drivers/spi/spi-lantiq.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -334,6 +334,13 @@ config SPI_MESON_SPIFC
- This enables master mode support for the SPIFC (SPI flash
- controller) available in Amlogic Meson SoCs.
-
-+config SPI_LANTIQ
-+ tristate "Lantiq SPI controller"
-+ depends on LANTIQ && (SOC_TYPE_XWAY || SOC_FALCON)
-+ help
-+ This driver supports the Lantiq SPI controller in master
-+ mode.
-+
- config SPI_OC_TINY
- tristate "OpenCores tiny SPI"
- depends on GPIOLIB
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
- obj-$(CONFIG_SPI_IMX) += spi-imx.o
-+obj-$(CONFIG_SPI_LANTIQ) += spi-lantiq.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
- obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
- obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
---- /dev/null
-+++ b/drivers/spi/spi-lantiq.c
-@@ -0,0 +1,1091 @@
-+/*
-+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/spi/spi.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define SPI_RX_IRQ_NAME "spi_rx"
-+#define SPI_TX_IRQ_NAME "spi_tx"
-+#define SPI_ERR_IRQ_NAME "spi_err"
-+#define SPI_FRM_IRQ_NAME "spi_frm"
-+
-+#define SPI_CLC 0x00
-+#define SPI_PISEL 0x04
-+#define SPI_ID 0x08
-+#define SPI_CON 0x10
-+#define SPI_STAT 0x14
-+#define SPI_WHBSTATE 0x18
-+#define SPI_TB 0x20
-+#define SPI_RB 0x24
-+#define SPI_RXFCON 0x30
-+#define SPI_TXFCON 0x34
-+#define SPI_FSTAT 0x38
-+#define SPI_BRT 0x40
-+#define SPI_BRSTAT 0x44
-+#define SPI_SFCON 0x60
-+#define SPI_SFSTAT 0x64
-+#define SPI_GPOCON 0x70
-+#define SPI_GPOSTAT 0x74
-+#define SPI_FPGO 0x78
-+#define SPI_RXREQ 0x80
-+#define SPI_RXCNT 0x84
-+#define SPI_DMACON 0xec
-+#define SPI_IRNEN 0xf4
-+#define SPI_IRNICR 0xf8
-+#define SPI_IRNCR 0xfc
-+
-+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
-+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
-+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
-+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
-+#define SPI_CLC_DISS BIT(1) /* Disable status bit */
-+#define SPI_CLC_DISR BIT(0) /* Disable request bit */
-+
-+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
-+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
-+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
-+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
-+#define SPI_ID_REV_M 0x1F /* Hardware revision number */
-+#define SPI_ID_CFG BIT(5) /* DMA interface support */
-+
-+#define SPI_CON_BM_S 16 /* Data width selection */
-+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
-+#define SPI_CON_EM BIT(24) /* Echo mode */
-+#define SPI_CON_IDLE BIT(23) /* Idle bit value */
-+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-+#define SPI_CON_AEN BIT(10) /* Abort error enable */
-+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
-+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-+#define SPI_CON_LB BIT(7) /* Loopback control */
-+#define SPI_CON_PO BIT(6) /* Clock polarity control */
-+#define SPI_CON_PH BIT(5) /* Clock phase control */
-+#define SPI_CON_HB BIT(4) /* Heading control */
-+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-+
-+#define SPI_STAT_RXBV_S 28
-+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
-+#define SPI_STAT_BSY BIT(13) /* Busy flag */
-+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-+#define SPI_STAT_AE BIT(10) /* Abort error flag */
-+#define SPI_STAT_RE BIT(9) /* Receive error flag */
-+#define SPI_STAT_TE BIT(8) /* Transmit error flag */
-+#define SPI_STAT_ME BIT(7) /* Mode error flag */
-+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
-+#define SPI_STAT_EN BIT(0) /* Enable bit */
-+
-+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-+#define SPI_WHBSTATE_CLR_ERRORS 0x0F50
-+
-+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
-+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
-+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-+
-+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
-+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
-+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-+
-+#define SPI_FSTAT_RXFFL_S 0
-+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
-+#define SPI_FSTAT_TXFFL_S 8
-+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
-+
-+#define SPI_GPOCON_ISCSBN_S 8
-+#define SPI_GPOCON_INVOUTN_S 0
-+
-+#define SPI_FGPO_SETOUTN_S 8
-+#define SPI_FGPO_CLROUTN_S 0
-+
-+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
-+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
-+
-+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
-+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
-+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
-+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
-+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
-+#define SPI_IRNEN_ALL 0x1F
-+
-+struct lantiq_spi_hwcfg {
-+ unsigned int num_chipselect;
-+ unsigned int irnen_r;
-+ unsigned int irnen_t;
-+};
-+
-+struct lantiq_spi {
-+ struct spi_master *master;
-+ struct device *dev;
-+ void __iomem *regbase;
-+ struct clk *spi_clk;
-+ struct clk *fpi_clk;
-+ const struct lantiq_spi_hwcfg *hwcfg;
-+
-+ spinlock_t lock;
-+ struct completion xfer_complete;
-+
-+ const u8 *tx;
-+ u8 *rx;
-+ unsigned int tx_todo;
-+ unsigned int rx_todo;
-+ unsigned int bits_per_word;
-+ unsigned int speed_hz;
-+ int status;
-+ unsigned long timeout;
-+ unsigned int cs_delay;
-+};
-+
-+struct lantiq_spi_cstate {
-+ int cs_gpio;
-+};
-+
-+static u32 lantiq_spi_readl(const struct lantiq_spi *spi, u32 reg)
-+{
-+ return readl_be(spi->regbase + reg);
-+}
-+
-+static void lantiq_spi_writel(const struct lantiq_spi *spi, u32 val, u32 reg)
-+{
-+ writel_be(val, spi->regbase + reg);
-+}
-+
-+static void lantiq_spi_maskl(const struct lantiq_spi *spi, u32 clr, u32 set,
-+ u32 reg)
-+{
-+ u32 val = readl_be(spi->regbase + reg);
-+ val &= ~clr;
-+ val |= set;
-+ writel_be(val, spi->regbase + reg);
-+}
-+
-+static int supports_dma(const struct lantiq_spi *spi)
-+{
-+ u32 id = lantiq_spi_readl(spi, SPI_ID);
-+ return id & SPI_ID_CFG;
-+}
-+
-+static unsigned int tx_fifo_size(const struct lantiq_spi *spi)
-+{
-+ u32 id = lantiq_spi_readl(spi, SPI_ID);
-+ return (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
-+}
-+
-+static unsigned int rx_fifo_size(const struct lantiq_spi *spi)
-+{
-+ u32 id = lantiq_spi_readl(spi, SPI_ID);
-+ return (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
-+}
-+
-+static unsigned int tx_fifo_level(const struct lantiq_spi *spi)
-+{
-+ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT);
-+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
-+}
-+
-+static unsigned int rx_fifo_level(const struct lantiq_spi *spi)
-+{
-+ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT);
-+ return fstat & SPI_FSTAT_RXFFL_M;
-+}
-+
-+static unsigned int tx_fifo_free(const struct lantiq_spi *spi)
-+{
-+ return tx_fifo_size(spi) - tx_fifo_level(spi);
-+}
-+
-+static void rx_fifo_reset(const struct lantiq_spi *spi)
-+{
-+ u32 val = rx_fifo_size(spi) << SPI_RXFCON_RXFITL_S;
-+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
-+ lantiq_spi_writel(spi, val, SPI_RXFCON);
-+}
-+
-+static void tx_fifo_reset(const struct lantiq_spi *spi)
-+{
-+ u32 val = 1 << SPI_TXFCON_TXFITL_S;
-+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
-+ lantiq_spi_writel(spi, val, SPI_TXFCON);
-+}
-+
-+static void rx_fifo_flush(const struct lantiq_spi *spi)
-+{
-+ lantiq_spi_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
-+}
-+
-+static void tx_fifo_flush(const struct lantiq_spi *spi)
-+{
-+ lantiq_spi_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
-+}
-+
-+static int hw_is_busy(const struct lantiq_spi *spi)
-+{
-+ u32 stat = lantiq_spi_readl(spi, SPI_STAT);
-+ return stat & SPI_STAT_BSY;
-+}
-+
-+static void hw_enter_config_mode(const struct lantiq_spi *spi)
-+{
-+ lantiq_spi_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
-+}
-+
-+static void hw_enter_active_mode(const struct lantiq_spi *spi)
-+{
-+ lantiq_spi_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
-+}
-+
-+static void hw_setup_speed_hz(const struct lantiq_spi *spi,
-+ unsigned int max_speed_hz)
-+{
-+ u32 spi_clk, brt;
-+
-+ /*
-+ * SPI module clock is derived from FPI bus clock dependent on
-+ * divider value in CLC.RMS which is always set to 1.
-+ *
-+ * f_SPI
-+ * baudrate = --------------
-+ * 2 * (BR + 1)
-+ */
-+ spi_clk = clk_get_rate(spi->fpi_clk) / 2;
-+
-+ if (max_speed_hz > spi_clk)
-+ brt = 0;
-+ else
-+ brt = spi_clk / max_speed_hz - 1;
-+
-+ if (brt > 0xFFFF)
-+ brt = 0xFFFF;
-+
-+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
-+ spi_clk, max_speed_hz, brt);
-+
-+ lantiq_spi_writel(spi, brt, SPI_BRT);
-+}
-+
-+static void hw_setup_bits_per_word(const struct lantiq_spi *spi,
-+ unsigned int bits_per_word)
-+{
-+ u32 bm;
-+
-+ /* CON.BM value = bits_per_word - 1 */
-+ bm = (bits_per_word - 1) << SPI_CON_BM_S;
-+
-+ lantiq_spi_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
-+}
-+
-+static void hw_setup_clock_mode(const struct lantiq_spi *spi,
-+ unsigned int mode)
-+{
-+ u32 con_set = 0, con_clr = 0;
-+
-+ /*
-+ * SPI mode mapping in CON register:
-+ * Mode CPOL CPHA CON.PO CON.PH
-+ * 0 0 0 0 1
-+ * 1 0 1 0 0
-+ * 2 1 0 1 1
-+ * 3 1 1 1 0
-+ */
-+ if (mode & SPI_CPHA)
-+ con_clr |= SPI_CON_PH;
-+ else
-+ con_set |= SPI_CON_PH;
-+
-+ if (mode & SPI_CPOL)
-+ con_set |= SPI_CON_PO | SPI_CON_IDLE;
-+ else
-+ con_clr |= SPI_CON_PO | SPI_CON_IDLE;
-+
-+ /* Set heading control */
-+ if (mode & SPI_LSB_FIRST)
-+ con_clr |= SPI_CON_HB;
-+ else
-+ con_set |= SPI_CON_HB;
-+
-+ /* Set loopback mode */
-+ if (mode & SPI_LOOP)
-+ con_set |= SPI_CON_LB;
-+ else
-+ con_clr |= SPI_CON_LB;
-+
-+ lantiq_spi_maskl(spi, con_clr, con_set, SPI_CON);
-+}
-+
-+static void lantiq_spi_hw_init(const struct lantiq_spi *spi)
-+{
-+ /*
-+ * Set clock divider for run mode to 1 to
-+ * run at same frequency as FPI bus
-+ */
-+ lantiq_spi_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
-+
-+ /* Put controller into config mode */
-+ hw_enter_config_mode(spi);
-+
-+ /* Disable all interrupts */
-+ lantiq_spi_writel(spi, 0, SPI_IRNEN);
-+
-+ /* Clear error flags */
-+ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+
-+ /* Enable error checking, disable TX/RX */
-+ lantiq_spi_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
-+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+
-+ /* Setup default SPI mode */
-+ hw_setup_bits_per_word(spi, spi->bits_per_word);
-+ hw_setup_clock_mode(spi, SPI_MODE_0);
-+
-+ /* Enable master mode and clear error flags */
-+ lantiq_spi_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
-+ SPI_WHBSTATE);
-+
-+ /* Reset GPIO/CS registers */
-+ lantiq_spi_writel(spi, 0, SPI_GPOCON);
-+ lantiq_spi_writel(spi, 0xFF00, SPI_FPGO);
-+
-+ /* Enable and flush FIFOs */
-+ rx_fifo_reset(spi);
-+ tx_fifo_reset(spi);
-+}
-+
-+static void hw_chipselect_set(struct lantiq_spi *spi, unsigned int cs)
-+{
-+ u32 fgpo = (1 << (cs - 1 + SPI_FGPO_SETOUTN_S));
-+ lantiq_spi_writel(spi, fgpo, SPI_FPGO);
-+}
-+
-+static void hw_chipselect_clear(struct lantiq_spi *spi, unsigned int cs)
-+{
-+ u32 fgpo = (1 << (cs - 1));
-+ lantiq_spi_writel(spi, fgpo, SPI_FPGO);
-+}
-+
-+static void hw_chipselect_init(struct lantiq_spi *spi, unsigned int cs,
-+ unsigned int cs_high)
-+{
-+ u32 gpocon;
-+
-+ /* set GPO pin to CS mode */
-+ gpocon = 1 << ((cs - 1) + SPI_GPOCON_ISCSBN_S);
-+
-+ /* invert GPO pin */
-+ if (cs_high)
-+ gpocon |= 1 << (cs - 1);
-+
-+ lantiq_spi_maskl(spi, 0, gpocon, SPI_GPOCON);
-+}
-+
-+static void chipselect_enable(struct spi_device *spidev)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
-+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
-+
-+ if (cstate->cs_gpio >= 0)
-+ gpio_set_value(cstate->cs_gpio, spidev->mode & SPI_CS_HIGH);
-+ else
-+ hw_chipselect_clear(spi, spidev->chip_select);
-+
-+ /* CS setup/recovery time */
-+ if (spi->cs_delay)
-+ ndelay(spi->cs_delay);
-+}
-+
-+static void chipselect_disable(struct spi_device *spidev)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
-+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
-+
-+ /* CS hold time */
-+ if (spi->cs_delay)
-+ ndelay(spi->cs_delay);
-+
-+ if (cstate->cs_gpio >= 0)
-+ gpio_set_value(cstate->cs_gpio, !(spidev->mode & SPI_CS_HIGH));
-+ else
-+ hw_chipselect_set(spi, spidev->chip_select);
-+
-+ /* CS setup/recovery time */
-+ if (spi->cs_delay)
-+ ndelay(spi->cs_delay);
-+}
-+
-+static int lantiq_spi_setup(struct spi_device *spidev)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
-+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
-+ int err;
-+
-+ if (!cstate) {
-+ cstate = kzalloc(sizeof(*cstate), GFP_KERNEL);
-+ if (!cstate)
-+ return -ENOMEM;
-+
-+ spi_set_ctldata(spidev, cstate);
-+ cstate->cs_gpio = -ENOENT;
-+
-+ if (spidev->cs_gpio >= 0) {
-+ dev_dbg(spi->dev, "using chipselect %u on GPIO %d\n",
-+ spidev->chip_select, spidev->cs_gpio);
-+
-+ err = gpio_request(spidev->cs_gpio, dev_name(spi->dev));
-+ if (err)
-+ return err;
-+
-+ gpio_direction_output(spidev->cs_gpio,
-+ !(spidev->mode & SPI_CS_HIGH));
-+
-+ cstate->cs_gpio = spidev->cs_gpio;
-+ } else {
-+ dev_dbg(spi->dev, "using internal chipselect %u\n",
-+ spidev->chip_select);
-+
-+ hw_chipselect_init(spi, spidev->chip_select,
-+ spidev->mode & SPI_CS_HIGH);
-+ hw_chipselect_set(spi, spidev->chip_select);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void lantiq_spi_cleanup(struct spi_device *spidev)
-+{
-+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
-+
-+ if (cstate->cs_gpio >= 0)
-+ gpio_free(cstate->cs_gpio);
-+
-+ kfree(cstate);
-+ spi_set_ctldata(spidev, NULL);
-+}
-+
-+static void hw_setup_message(const struct lantiq_spi *spi,
-+ struct spi_device *spidev)
-+{
-+ const struct lantiq_spi_hwcfg *hwcfg = spi->hwcfg;
-+
-+ hw_enter_config_mode(spi);
-+ hw_setup_clock_mode(spi, spidev->mode);
-+ hw_enter_active_mode(spi);
-+
-+ /* Enable interrupts */
-+ lantiq_spi_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
-+ SPI_IRNEN);
-+}
-+
-+static void hw_setup_transfer(struct lantiq_spi *spi, struct spi_device *spidev,
-+ struct spi_transfer *t)
-+{
-+ unsigned int speed_hz, bits_per_word;
-+ u32 con;
-+
-+ if (t->speed_hz)
-+ speed_hz = t->speed_hz;
-+ else
-+ speed_hz = spidev->max_speed_hz;
-+
-+ if (t->bits_per_word)
-+ bits_per_word = t->bits_per_word;
-+ else
-+ bits_per_word = spidev->bits_per_word;
-+
-+ if (bits_per_word != spi->bits_per_word ||
-+ speed_hz != spi->speed_hz) {
-+ hw_enter_config_mode(spi);
-+ hw_setup_speed_hz(spi, speed_hz);
-+ hw_setup_bits_per_word(spi, bits_per_word);
-+ hw_enter_active_mode(spi);
-+
-+ spi->speed_hz = speed_hz;
-+ spi->bits_per_word = bits_per_word;
-+ }
-+
-+ /* Configure transmitter and receiver */
-+ con = lantiq_spi_readl(spi, SPI_CON);
-+ if (t->tx_buf)
-+ con &= ~SPI_CON_TXOFF;
-+ else
-+ con |= SPI_CON_TXOFF;
-+
-+ if (t->rx_buf)
-+ con &= ~SPI_CON_RXOFF;
-+ else
-+ con |= SPI_CON_RXOFF;
-+
-+ lantiq_spi_writel(spi, con, SPI_CON);
-+}
-+
-+static void hw_finish_message(const struct lantiq_spi *spi)
-+{
-+ /* Disable interrupts */
-+ lantiq_spi_writel(spi, 0, SPI_IRNEN);
-+
-+ /* Disable transmitter and receiver */
-+ lantiq_spi_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+}
-+
-+static void tx_fifo_write(struct lantiq_spi *spi)
-+{
-+ const u8 *tx8;
-+ const u16 *tx16;
-+ const u32 *tx32;
-+ u32 data;
-+ unsigned int tx_free = tx_fifo_free(spi);
-+
-+ while (spi->tx_todo && tx_free) {
-+ switch (spi->bits_per_word) {
-+ case 8:
-+ tx8 = spi->tx;
-+ data = *tx8;
-+ spi->tx_todo--;
-+ spi->tx++;
-+ break;
-+ case 16:
-+ tx16 = (u16 *) spi->tx;
-+ data = *tx16;
-+ spi->tx_todo -= 2;
-+ spi->tx += 2;
-+ break;
-+ case 32:
-+ tx32 = (u32 *) spi->tx;
-+ data = *tx32;
-+ spi->tx_todo -= 4;
-+ spi->tx += 4;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ lantiq_spi_writel(spi, data, SPI_TB);
-+ tx_free--;
-+ }
-+}
-+
-+static void rx_fifo_read_full_duplex(struct lantiq_spi *spi)
-+{
-+ u8 *rx8;
-+ u16 *rx16;
-+ u32 *rx32;
-+ u32 data;
-+ unsigned int rx_fill = rx_fifo_level(spi);
-+
-+ while (rx_fill) {
-+ data = lantiq_spi_readl(spi, SPI_RB);
-+
-+ switch (spi->bits_per_word) {
-+ case 8:
-+ rx8 = spi->rx;
-+ *rx8 = data;
-+ spi->rx_todo--;
-+ spi->rx++;
-+ break;
-+ case 16:
-+ rx16 = (u16 *) spi->rx;
-+ *rx16 = data;
-+ spi->rx_todo -= 2;
-+ spi->rx += 2;
-+ break;
-+ case 32:
-+ rx32 = (u32 *) spi->rx;
-+ *rx32 = data;
-+ spi->rx_todo -= 4;
-+ spi->rx += 4;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ rx_fill--;
-+ }
-+}
-+
-+static void rx_fifo_read_half_duplex(struct lantiq_spi *spi)
-+{
-+ u32 data, *rx32;
-+ u8 *rx8;
-+ unsigned int rxbv, shift;
-+ unsigned int rx_fill = rx_fifo_level(spi);
-+
-+ /*
-+ * In RX-only mode the bits per word value is ignored by HW. A value
-+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
-+ * If remaining RX bytes are less than 4, the FIFO must be read
-+ * differently. The amount of received and valid bytes is indicated
-+ * by STAT.RXBV register value.
-+ */
-+ while (rx_fill) {
-+ if (spi->rx_todo < 4) {
-+ rxbv = (lantiq_spi_readl(spi, SPI_STAT) &
-+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
-+ data = lantiq_spi_readl(spi, SPI_RB);
-+
-+ shift = (rxbv - 1) * 8;
-+ rx8 = spi->rx;
-+
-+ while (rxbv) {
-+ *rx8++ = (data >> shift) & 0xFF;
-+ rxbv--;
-+ shift -= 8;
-+ spi->rx_todo--;
-+ spi->rx++;
-+ }
-+ } else {
-+ data = lantiq_spi_readl(spi, SPI_RB);
-+ rx32 = (u32 *) spi->rx;
-+
-+ *rx32++ = data;
-+ spi->rx_todo -= 4;
-+ spi->rx += 4;
-+ }
-+ rx_fill--;
-+ }
-+}
-+
-+static void rx_request(struct lantiq_spi *spi)
-+{
-+ unsigned int rxreq, rxreq_max;
-+
-+ /*
-+ * To avoid receive overflows at high clocks it is better to request
-+ * only the amount of bytes that fits into all FIFOs. This value
-+ * depends on the FIFO size implemented in hardware.
-+ */
-+ rxreq = spi->rx_todo;
-+ rxreq_max = rx_fifo_size(spi) * 4;
-+ if (rxreq > rxreq_max)
-+ rxreq = rxreq_max;
-+
-+ lantiq_spi_writel(spi, rxreq, SPI_RXREQ);
-+}
-+
-+static irqreturn_t lantiq_spi_xmit_interrupt(int irq, void *data)
-+{
-+ struct lantiq_spi *spi = data;
-+
-+ /* handle possible interrupts after device initialization */
-+ if (!spi->rx && !spi->tx)
-+ return IRQ_HANDLED;
-+
-+ if (spi->tx) {
-+ if (spi->rx && spi->rx_todo)
-+ rx_fifo_read_full_duplex(spi);
-+
-+ if (spi->tx_todo)
-+ tx_fifo_write(spi);
-+ else
-+ goto completed;
-+ } else if (spi->rx) {
-+ if (spi->rx_todo) {
-+ rx_fifo_read_half_duplex(spi);
-+
-+ if (spi->rx_todo)
-+ rx_request(spi);
-+ else
-+ goto completed;
-+ } else
-+ goto completed;
-+ }
-+
-+ return IRQ_HANDLED;
-+
-+completed:
-+ spi->status = 0;
-+ complete(&spi->xfer_complete);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t lantiq_spi_err_interrupt(int irq, void *data)
-+{
-+ struct lantiq_spi *spi = data;
-+ u32 stat = lantiq_spi_readl(spi, SPI_STAT);
-+
-+ if (stat & SPI_STAT_RUE)
-+ dev_err(spi->dev, "receive underflow error\n");
-+ if (stat & SPI_STAT_TUE)
-+ dev_err(spi->dev, "transmit underflow error\n");
-+ if (stat & SPI_STAT_RE)
-+ dev_err(spi->dev, "receive overflow error\n");
-+ if (stat & SPI_STAT_TE)
-+ dev_err(spi->dev, "transmit overflow error\n");
-+ if (stat & SPI_STAT_ME)
-+ dev_err(spi->dev, "mode error\n");
-+
-+ /* Disable all interrupts */
-+ lantiq_spi_writel(spi, 0, SPI_IRNEN);
-+
-+ /* Clear error flags */
-+ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+
-+ /* flush FIFOs */
-+ rx_fifo_flush(spi);
-+ tx_fifo_flush(spi);
-+
-+ /* set bad status so it can be retried */
-+ spi->status = -EIO;
-+ complete(&spi->xfer_complete);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int transfer_start(struct lantiq_spi *spi, struct spi_device *spidev,
-+ struct spi_transfer *t)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&spi->lock, flags);
-+
-+ spi->tx = t->tx_buf;
-+ spi->rx = t->rx_buf;
-+ spi->status = -EINPROGRESS;
-+
-+ if (t->tx_buf) {
-+ spi->tx_todo = t->len;
-+
-+ /* initially fill TX FIFO */
-+ tx_fifo_write(spi);
-+ }
-+
-+ if (spi->rx) {
-+ spi->rx_todo = t->len;
-+
-+ /* start shift clock in RX-only mode */
-+ if (!spi->tx)
-+ rx_request(spi);
-+ }
-+
-+ spin_unlock_irqrestore(&spi->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int transfer_wait_finished(struct lantiq_spi *spi)
-+{
-+ unsigned long timeout;
-+
-+ /* wait for completion by interrupt */
-+ timeout = wait_for_completion_timeout(&spi->xfer_complete,
-+ msecs_to_jiffies(spi->timeout));
-+ if (!timeout)
-+ return -EIO;
-+
-+ /* make sure that HW is idle */
-+ timeout = jiffies + msecs_to_jiffies(spi->timeout);
-+ do {
-+ if (!hw_is_busy(spi))
-+ return 0;
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
-+
-+ /* flush FIFOs on timeout */
-+ rx_fifo_flush(spi);
-+ tx_fifo_flush(spi);
-+
-+ return -EIO;
-+}
-+
-+static int lantiq_spi_transfer_one_message(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(master);
-+ struct spi_device *spidev = msg->spi;
-+ struct spi_transfer *t;
-+ int status;
-+ unsigned int cs_change = 1;
-+
-+ hw_setup_message(spi, spidev);
-+
-+ list_for_each_entry(t, &msg->transfers, transfer_list) {
-+ reinit_completion(&spi->xfer_complete);
-+
-+ hw_setup_transfer(spi, spidev, t);
-+
-+ if (cs_change)
-+ chipselect_enable(spidev);
-+ cs_change = t->cs_change;
-+
-+ status = transfer_start(spi, spidev, t);
-+ if (status) {
-+ dev_err(spi->dev, "failed to start transfer\n");
-+ goto done;
-+ }
-+
-+ status = transfer_wait_finished(spi);
-+ if (status) {
-+ dev_err(spi->dev, "transfer timeout\n");
-+ goto done;
-+ }
-+
-+ status = spi->status;
-+ if (status) {
-+ dev_err(spi->dev, "transfer failed\n");
-+ goto done;
-+ }
-+
-+ msg->actual_length += t->len;
-+
-+ if (t->delay_usecs)
-+ udelay(t->delay_usecs);
-+
-+ if (cs_change)
-+ chipselect_disable(spidev);
-+ }
-+
-+done:
-+ msg->status = status;
-+
-+ if (!(status == 0 && cs_change))
-+ chipselect_disable(spidev);
-+
-+ spi_finalize_current_message(master);
-+ hw_finish_message(spi);
-+
-+ return status;
-+}
-+
-+static int lantiq_spi_prepare_transfer(struct spi_master *master)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(master);
-+
-+ pm_runtime_get_sync(spi->dev);
-+
-+ return 0;
-+}
-+
-+static int lantiq_spi_unprepare_transfer(struct spi_master *master)
-+{
-+ struct lantiq_spi *spi = spi_master_get_devdata(master);
-+
-+ pm_runtime_put(spi->dev);
-+
-+ return 0;
-+}
-+
-+static const struct lantiq_spi_hwcfg spi_xway = {
-+ .num_chipselect = 3,
-+ .irnen_r = SPI_IRNEN_R_XWAY,
-+ .irnen_t = SPI_IRNEN_T_XWAY,
-+};
-+
-+static const struct lantiq_spi_hwcfg spi_xrx = {
-+ .num_chipselect = 6,
-+ .irnen_r = SPI_IRNEN_R_XRX,
-+ .irnen_t = SPI_IRNEN_T_XRX,
-+};
-+
-+static const struct of_device_id lantiq_spi_match[] = {
-+ { .compatible = "lantiq,spi-xway", .data = &spi_xway, }, /* DEPRECATED */
-+ { .compatible = "lantiq,ase-spi", .data = &spi_xway, },
-+ { .compatible = "lantiq,xrx100-spi", .data = &spi_xrx, },
-+ { .compatible = "lantiq,xrx200-spi", .data = &spi_xrx, },
-+ { .compatible = "lantiq,xrx330-spi", .data = &spi_xrx, },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, lantiq_spi_match);
-+
-+static int lantiq_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct resource *res;
-+ struct lantiq_spi *spi;
-+ const struct lantiq_spi_hwcfg *hwcfg;
-+ const struct of_device_id *match;
-+ int err, rx_irq, tx_irq, err_irq;
-+
-+ match = of_match_device(lantiq_spi_match, &pdev->dev);
-+ if (!match) {
-+ dev_err(&pdev->dev, "no device match\n");
-+ return -EINVAL;
-+ }
-+ hwcfg = match->data;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENXIO;
-+ }
-+
-+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
-+ if (rx_irq < 0) {
-+ dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
-+ if (tx_irq < 0) {
-+ dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
-+ if (err_irq < 0) {
-+ dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_spi));
-+ if (!master)
-+ return -ENOMEM;
-+
-+ spi = spi_master_get_devdata(master);
-+ spi->master = master;
-+ spi->dev = &pdev->dev;
-+ spi->hwcfg = hwcfg;
-+ platform_set_drvdata(pdev, spi);
-+
-+ spi->regbase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(spi->regbase)) {
-+ err = PTR_ERR(spi->regbase);
-+ goto err_master_put;
-+ }
-+
-+ err = devm_request_irq(&pdev->dev, rx_irq, lantiq_spi_xmit_interrupt, 0,
-+ SPI_RX_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ err = devm_request_irq(&pdev->dev, tx_irq, lantiq_spi_xmit_interrupt, 0,
-+ SPI_TX_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ err = devm_request_irq(&pdev->dev, err_irq, lantiq_spi_err_interrupt, 0,
-+ SPI_ERR_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ spi->spi_clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(spi->spi_clk)) {
-+ err = PTR_ERR(spi->spi_clk);
-+ goto err_master_put;
-+ }
-+ clk_prepare_enable(spi->spi_clk);
-+
-+ spi->fpi_clk = clk_get_fpi();
-+ if (IS_ERR(spi->fpi_clk)) {
-+ err = PTR_ERR(spi->fpi_clk);
-+ goto err_clk_disable;
-+ }
-+
-+ init_completion(&spi->xfer_complete);
-+ spin_lock_init(&spi->lock);
-+ spi->timeout = 2000;
-+ spi->cs_delay = 100;
-+ spi->bits_per_word = 8;
-+ spi->speed_hz = 0;
-+
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->bus_num = 0;
-+ master->num_chipselect = hwcfg->num_chipselect;
-+ master->setup = lantiq_spi_setup;
-+ master->cleanup = lantiq_spi_cleanup;
-+ master->prepare_transfer_hardware = lantiq_spi_prepare_transfer;
-+ master->transfer_one_message = lantiq_spi_transfer_one_message;
-+ master->unprepare_transfer_hardware = lantiq_spi_unprepare_transfer;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
-+ SPI_LOOP;
-+
-+ lantiq_spi_hw_init(spi);
-+
-+ err = spi_register_master(master);
-+ if (err) {
-+ dev_err(&pdev->dev, "failed to register spi_master\n");
-+ goto err_clk_put;
-+ }
-+
-+ dev_info(&pdev->dev,
-+ "Lantiq SPI controller (TXFS %u, RXFS %u, DMA %u)\n",
-+ tx_fifo_size(spi), rx_fifo_size(spi), supports_dma(spi));
-+
-+ return 0;
-+
-+err_clk_put:
-+ clk_put(spi->fpi_clk);
-+err_clk_disable:
-+ clk_disable_unprepare(spi->spi_clk);
-+ clk_put(spi->spi_clk);
-+err_master_put:
-+ platform_set_drvdata(pdev, NULL);
-+ spi_master_put(master);
-+
-+ return err;
-+}
-+
-+static int lantiq_spi_remove(struct platform_device *pdev)
-+{
-+ struct lantiq_spi *spi = platform_get_drvdata(pdev);
-+ struct spi_master *master = spi->master;
-+
-+ spi_unregister_master(master);
-+
-+ lantiq_spi_writel(spi, 0, SPI_IRNEN);
-+ rx_fifo_flush(spi);
-+ tx_fifo_flush(spi);
-+ hw_enter_config_mode(spi);
-+
-+ clk_disable_unprepare(spi->spi_clk);
-+ clk_put(spi->spi_clk);
-+ clk_put(spi->fpi_clk);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ spi_master_put(master);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver lantiq_spi_driver = {
-+ .probe = lantiq_spi_probe,
-+ .remove = lantiq_spi_remove,
-+ .driver = {
-+ .name = "spi-lantiq",
-+ .owner = THIS_MODULE,
-+ .of_match_table = lantiq_spi_match,
-+ },
-+};
-+module_platform_driver(lantiq_spi_driver);
-+
-+MODULE_DESCRIPTION("Lantiq SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:spi-lantiq");
diff --git a/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch
deleted file mode 100644
index ed7927e046..0000000000
--- a/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch
+++ /dev/null
@@ -1,158 +0,0 @@
---- a/arch/mips/pci/ifxmips_pcie.c
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -18,6 +18,9 @@
- #include <linux/pci_regs.h>
- #include <linux/module.h>
-
-+#include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
-+
- #include "ifxmips_pcie.h"
- #include "ifxmips_pcie_reg.h"
-
-@@ -40,6 +43,7 @@
- static DEFINE_SPINLOCK(ifx_pcie_lock);
-
- u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+static int pcie_reset_gpio;
-
- static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
- {
-@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ...
- printk("%s", buf);
- }
-
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+ gpio_direction_output(pcie_reset_gpio, 1);
-+ gpio_set_value(pcie_reset_gpio, 1);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+ gpio_set_value(pcie_reset_gpio, 0);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+ mdelay(100);
-+ gpio_direction_output(pcie_reset_gpio, 1);
-+}
-
- static inline int pcie_ltssm_enable(int pcie_port)
- {
-@@ -1045,8 +1065,9 @@ pcie_rc_initialize(int pcie_port)
- return 0;
- }
-
--static int __init ifx_pcie_bios_init(void)
-+static int __init ifx_pcie_bios_probe(struct platform_device *pdev)
- {
-+ struct device_node *node = pdev->dev.of_node;
- void __iomem *io_map_base;
- int pcie_port;
- int startup_port;
-@@ -1055,7 +1076,17 @@ static int __init ifx_pcie_bios_init(voi
- pcie_ahb_pmu_setup();
-
- startup_port = IFX_PCIE_PORT0;
--
-+
-+ pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-+ if (gpio_is_valid(pcie_reset_gpio)) {
-+ int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset");
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio);
-+ return ret;
-+ }
-+ gpio_direction_output(pcie_reset_gpio, 1);
-+ }
-+
- for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
- if (pcie_rc_initialize(pcie_port) == 0) {
- IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n",
-@@ -1083,6 +1114,30 @@ static int __init ifx_pcie_bios_init(voi
-
- return 0;
- }
-+
-+static const struct of_device_id ifxmips_pcie_match[] = {
-+ { .compatible = "lantiq,pcie-xrx200" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ifxmips_pcie_match);
-+
-+static struct platform_driver ltq_pci_driver = {
-+ .probe = ifx_pcie_bios_probe,
-+ .driver = {
-+ .name = "pcie-xrx200",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ifxmips_pcie_match,
-+ },
-+};
-+
-+int __init ifx_pcie_bios_init(void)
-+{
-+ int ret = platform_driver_register(&ltq_pci_driver);
-+ if (ret)
-+ pr_info("pcie-xrx200: Error registering platform driver!");
-+ return ret;
-+}
-+
- arch_initcall(ifx_pcie_bios_init);
-
- MODULE_LICENSE("GPL");
---- a/arch/mips/pci/ifxmips_pcie_vr9.h
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -22,8 +22,6 @@
- #include <linux/gpio.h>
- #include <lantiq_soc.h>
-
--#define IFX_PCIE_GPIO_RESET 494
--
- #define IFX_REG_R32 ltq_r32
- #define IFX_REG_W32 ltq_w32
- #define CONFIG_IFX_PCIE_HW_SWAP
-@@ -53,21 +51,6 @@
- #define OUT ((volatile u32*)(IFX_GPIO + 0x0070))
-
-
--static inline void pcie_ep_gpio_rst_init(int pcie_port)
--{
--
-- gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
-- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-- gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
--
--/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-- ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-- ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-- ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-- ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-- ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
--}
--
- static inline void pcie_ahb_pmu_setup(void)
- {
- /* Enable AHB bus master/slave */
-@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
- }
-
--static inline void pcie_device_rst_assert(int pcie_port)
--{
-- gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
--// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--}
--
--static inline void pcie_device_rst_deassert(int pcie_port)
--{
-- mdelay(100);
-- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
--// gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-- //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--}
--
- static inline void pcie_core_pmu_setup(int pcie_port)
- {
- struct clk *clk;
diff --git a/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch
deleted file mode 100644
index c09323104d..0000000000
--- a/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch
+++ /dev/null
@@ -1,217 +0,0 @@
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/mtd/cfi.h>
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/concat.h>
- #include <linux/of.h>
-
- #include <lantiq_soc.h>
-@@ -38,10 +39,12 @@ enum {
- LTQ_NOR_NORMAL
- };
-
-+#define MAX_RESOURCES 4
-+
- struct ltq_mtd {
-- struct resource *res;
-- struct mtd_info *mtd;
-- struct map_info *map;
-+ struct mtd_info *mtd[MAX_RESOURCES];
-+ struct mtd_info *cmtd;
-+ struct map_info map[MAX_RESOURCES];
- };
-
- static const char ltq_map_name[] = "ltq_nor";
-@@ -109,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign
- }
-
- static int
-+ltq_mtd_remove(struct platform_device *pdev)
-+{
-+ struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
-+ int i;
-+
-+ if (ltq_mtd == NULL)
-+ return 0;
-+
-+ if (ltq_mtd->cmtd) {
-+ mtd_device_unregister(ltq_mtd->cmtd);
-+ if (ltq_mtd->cmtd != ltq_mtd->mtd[0])
-+ mtd_concat_destroy(ltq_mtd->cmtd);
-+ }
-+
-+ for (i = 0; i < MAX_RESOURCES; i++) {
-+ if (ltq_mtd->mtd[i] != NULL)
-+ map_destroy(ltq_mtd->mtd[i]);
-+ }
-+
-+ kfree(ltq_mtd);
-+
-+ return 0;
-+}
-+
-+static int
- ltq_mtd_probe(struct platform_device *pdev)
- {
- struct mtd_part_parser_data ppdata;
- struct ltq_mtd *ltq_mtd;
- struct cfi_private *cfi;
-- int err;
-+ int err = 0;
-+ int i;
-+ int devices_found = 0;
-+
-+ static const char *rom_probe_types[] = {
-+ "cfi_probe", "jedec_probe", NULL
-+ };
-+ const char **type;
-
- if (of_machine_is_compatible("lantiq,falcon") &&
- (ltq_boot_select() != BS_FLASH)) {
-@@ -128,76 +163,88 @@ ltq_mtd_probe(struct platform_device *pd
-
- platform_set_drvdata(pdev, ltq_mtd);
-
-- ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!ltq_mtd->res) {
-- dev_err(&pdev->dev, "failed to get memory resource\n");
-- return -ENOENT;
-+ for (i = 0; i < pdev->num_resources; i++) {
-+ printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n",
-+ (unsigned long long)resource_size(&pdev->resource[i]),
-+ (unsigned long long)pdev->resource[i].start);
-+
-+ if (!devm_request_mem_region(&pdev->dev,
-+ pdev->resource[i].start,
-+ resource_size(&pdev->resource[i]),
-+ dev_name(&pdev->dev))) {
-+ dev_err(&pdev->dev, "Could not reserve memory region\n");
-+ return -ENOMEM;
-+ }
-+
-+ ltq_mtd->map[i].name = ltq_map_name;
-+ ltq_mtd->map[i].bankwidth = 2;
-+ ltq_mtd->map[i].read = ltq_read16;
-+ ltq_mtd->map[i].write = ltq_write16;
-+ ltq_mtd->map[i].copy_from = ltq_copy_from;
-+ ltq_mtd->map[i].copy_to = ltq_copy_to;
-+
-+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+ ltq_mtd->map[i].phys = NO_XIP;
-+ else
-+ ltq_mtd->map[i].phys = pdev->resource[i].start;
-+ ltq_mtd->map[i].size = resource_size(&pdev->resource[i]);
-+ ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start,
-+ ltq_mtd->map[i].size);
-+ if (IS_ERR(ltq_mtd->map[i].virt))
-+ return PTR_ERR(ltq_mtd->map[i].virt);
-+
-+ if (ltq_mtd->map[i].virt == NULL) {
-+ dev_err(&pdev->dev, "Failed to ioremap flash region\n");
-+ err = PTR_ERR(ltq_mtd->map[i].virt);
-+ goto err_out;
-+ }
-+
-+ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING;
-+ for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++)
-+ ltq_mtd->mtd[i] = do_map_probe(*type, &ltq_mtd->map[i]);
-+ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL;
-+
-+ if (!ltq_mtd->mtd[i]) {
-+ dev_err(&pdev->dev, "probing failed\n");
-+ return -ENXIO;
-+ } else {
-+ devices_found++;
-+ }
-+
-+ ltq_mtd->mtd[i]->owner = THIS_MODULE;
-+ ltq_mtd->mtd[i]->dev.parent = &pdev->dev;
-+
-+ cfi = ltq_mtd->map[i].fldrv_priv;
-+ cfi->addr_unlock1 ^= 1;
-+ cfi->addr_unlock2 ^= 1;
- }
-
-- ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
-- GFP_KERNEL);
-- if (!ltq_mtd->map)
-- return -ENOMEM;
--
-- if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-- ltq_mtd->map->phys = NO_XIP;
-- else
-- ltq_mtd->map->phys = ltq_mtd->res->start;
-- ltq_mtd->res->start;
-- ltq_mtd->map->size = resource_size(ltq_mtd->res);
-- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
-- if (IS_ERR(ltq_mtd->map->virt))
-- return PTR_ERR(ltq_mtd->map->virt);
--
-- ltq_mtd->map->name = ltq_map_name;
-- ltq_mtd->map->bankwidth = 2;
-- ltq_mtd->map->read = ltq_read16;
-- ltq_mtd->map->write = ltq_write16;
-- ltq_mtd->map->copy_from = ltq_copy_from;
-- ltq_mtd->map->copy_to = ltq_copy_to;
--
-- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
-- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
-- ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
--
-- if (!ltq_mtd->mtd) {
-- dev_err(&pdev->dev, "probing failed\n");
-- return -ENXIO;
-- }
--
-- ltq_mtd->mtd->owner = THIS_MODULE;
--
-- cfi = ltq_mtd->map->fldrv_priv;
-- cfi->addr_unlock1 ^= 1;
-- cfi->addr_unlock2 ^= 1;
-+ if (devices_found == 1) {
-+ ltq_mtd->cmtd = ltq_mtd->mtd[0];
-+ } else if (devices_found > 1) {
-+ /*
-+ * We detected multiple devices. Concatenate them together.
-+ */
-+ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
-+ if (ltq_mtd->cmtd == NULL)
-+ err = -ENXIO;
-+ }
-
- ppdata.of_node = pdev->dev.of_node;
-- err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types,
-+ err = mtd_device_parse_register(ltq_mtd->cmtd, ltq_probe_types,
- &ppdata, NULL, 0);
- if (err) {
- dev_err(&pdev->dev, "failed to add partitions\n");
-- goto err_destroy;
-+ goto err_out;
- }
-
- return 0;
-
--err_destroy:
-- map_destroy(ltq_mtd->mtd);
-+err_out:
-+ ltq_mtd_remove(pdev);
- return err;
- }
-
--static int
--ltq_mtd_remove(struct platform_device *pdev)
--{
-- struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
--
-- if (ltq_mtd && ltq_mtd->mtd) {
-- mtd_device_unregister(ltq_mtd->mtd);
-- map_destroy(ltq_mtd->mtd);
-- }
-- return 0;
--}
--
- static const struct of_device_id ltq_mtd_match[] = {
- { .compatible = "lantiq,nor" },
- {},
diff --git a/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
deleted file mode 100644
index d153c521d3..0000000000
--- a/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -39,7 +39,7 @@
- /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
-
- // debugging, turns off buffer write mode if set to 1
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- /* Intel chips */
- #define I82802AB 0x00ad