aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts574
-rw-r--r--target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-lynx-rfb1.dts549
-rw-r--r--target/linux/mediatek/mt7622/config-4.14446
-rw-r--r--target/linux/mediatek/mt7623/config-4.14502
-rw-r--r--target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch27
-rw-r--r--target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch21
-rw-r--r--target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch92
-rw-r--r--target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch26
-rw-r--r--target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch268
-rw-r--r--target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch47
-rw-r--r--target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch50
-rw-r--r--target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch41
-rw-r--r--target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch43
-rw-r--r--target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch79
-rw-r--r--target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch21
-rw-r--r--target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch21
-rw-r--r--target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch21
-rw-r--r--target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch14
-rw-r--r--target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch46
-rw-r--r--target/linux/mediatek/patches-4.14/0064-dts.patch127
-rw-r--r--target/linux/mediatek/patches-4.14/0101-reset-mediatek-add-reset-controller-dt-bindings-requ.patch114
-rw-r--r--target/linux/mediatek/patches-4.14/0102-soc-mediatek-pwrap-fixup-warnings-from-coding-style.patch71
-rw-r--r--target/linux/mediatek/patches-4.14/0104-usb-mtu3-support-option-to-disable-usb3-ports.patch108
-rw-r--r--target/linux/mediatek/patches-4.14/0105-usb-mtu3-remove-dummy-wakeup-debounce-clocks.patch119
-rw-r--r--target/linux/mediatek/patches-4.14/0106-usb-mtu3-add-optional-mcu-and-dma-bus-clocks.patch227
-rw-r--r--target/linux/mediatek/patches-4.14/0107-usb-mtu3-support-36-bit-DMA-address.patch362
-rw-r--r--target/linux/mediatek/patches-4.14/0108-usb-mtu3-use-FORCE-RG_IDDIG-to-implement-manual-DRD-.patch274
-rw-r--r--target/linux/mediatek/patches-4.14/0109-usb-mtu3-add-support-for-usb3.1-IP.patch152
-rw-r--r--target/linux/mediatek/patches-4.14/0110-usb-mtu3-get-optional-vbus-for-host-only-mode.patch40
-rw-r--r--target/linux/mediatek/patches-4.14/0111-usb-mtu3-set-invalid-dr_mode-as-dual-role-mode.patch29
-rw-r--r--target/linux/mediatek/patches-4.14/0112-usb-mtu3-set-otg_sel-for-u2port-only-if-works-as-dua.patch44
-rw-r--r--target/linux/mediatek/patches-4.14/0113-dt-bindings-usb-mtu3-add-a-optional-property-to-disa.patch25
-rw-r--r--target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch41
-rw-r--r--target/linux/mediatek/patches-4.14/0115-dt-bindings-usb-mtu3-remove-optional-pinctrls.patch30
-rw-r--r--target/linux/mediatek/patches-4.14/0116-dt-bindings-arm-mediatek-add-MT7622-string-to-the-PM.patch38
-rw-r--r--target/linux/mediatek/patches-4.14/0117-soc-mediatek-pwrap-add-pwrap_read32-for-reading-in-3.patch134
-rw-r--r--target/linux/mediatek/patches-4.14/0118-soc-mediatek-pwrap-add-pwrap_write32-for-writing-in-.patch132
-rw-r--r--target/linux/mediatek/patches-4.14/0119-soc-mediatek-pwrap-refactor-pwrap_init-for-the-vario.patch227
-rw-r--r--target/linux/mediatek/patches-4.14/0120-soc-mediatek-pwrap-add-MediaTek-MT6380-as-one-slave-.patch98
-rw-r--r--target/linux/mediatek/patches-4.14/0121-soc-mediatek-pwrap-add-common-way-for-setup-CS-timin.patch121
-rw-r--r--target/linux/mediatek/patches-4.14/0122-soc-mediatek-pwrap-add-support-for-MT7622-SoC.patch237
-rw-r--r--target/linux/mediatek/patches-4.14/0123-soc-mediatek-place-Kconfig-for-all-SoC-drivers-under.patch57
-rw-r--r--target/linux/mediatek/patches-4.14/0124-arm64-mediatek-cleanup-message-for-platform-selectio.patch34
-rw-r--r--target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch86
-rw-r--r--target/linux/mediatek/patches-4.14/0126-usb-xhci-mtk-use-dma_set_mask_and_coherent-in-probe-.patch35
-rw-r--r--target/linux/mediatek/patches-4.14/0127-usb-xhci-mtk-use-ports-count-from-xhci-in-xhci_mtk_s.patch53
-rw-r--r--target/linux/mediatek/patches-4.14/0128-usb-xhci-mtk-check-clock-stability-of-U3_MAC.patch36
-rw-r--r--target/linux/mediatek/patches-4.14/0129-usb-xhci-mtk-support-option-to-disable-usb3-ports.patch85
-rw-r--r--target/linux/mediatek/patches-4.14/0130-usb-xhci-mtk-remove-dummy-wakeup-debounce-clocks.patch86
-rw-r--r--target/linux/mediatek/patches-4.14/0131-usb-xhci-mtk-add-optional-mcu-and-dma-bus-clocks.patch139
-rw-r--r--target/linux/mediatek/patches-4.14/0132-usb-host-modify-description-for-MTK-xHCI-config.patch32
-rw-r--r--target/linux/mediatek/patches-4.14/0133-dt-bindings-usb-mtk-xhci-add-a-optional-property-to-.patch25
-rw-r--r--target/linux/mediatek/patches-4.14/0134-dt-bindings-usb-mtk-xhci-remove-dummy-clocks-and-add.patch58
-rw-r--r--target/linux/mediatek/patches-4.14/0135-dt-bindings-mtd-add-new-compatible-strings-and-impro.patch42
-rw-r--r--target/linux/mediatek/patches-4.14/0136-mtd-mtk-nor-add-suspend-resume-support.patch128
-rw-r--r--target/linux/mediatek/patches-4.14/0137-dt-bindings-rtc-mediatek-add-bindings-for-MediaTek-S.patch41
-rw-r--r--target/linux/mediatek/patches-4.14/0138-rtc-mediatek-add-driver-for-RTC-on-MT7622-SoC.patch471
-rw-r--r--target/linux/mediatek/patches-4.14/0139-rtc-mediatek-enhance-the-description-for-MediaTek-PM.patch39
-rw-r--r--target/linux/mediatek/patches-4.14/0140-mtd-nand-mtk-change-the-compile-sequence-of-mtk_nand.patch31
-rw-r--r--target/linux/mediatek/patches-4.14/0142-mmc-dt-bindings-Add-reg-source_cg-latch-ck-for-Media.patch60
-rw-r--r--target/linux/mediatek/patches-4.14/0143-mmc-mediatek-add-support-of-mt2701-mt2712.patch187
-rw-r--r--target/linux/mediatek/patches-4.14/0144-dt-bindings-ARM-Mediatek-Document-bindings-for-MT271.patch196
-rw-r--r--target/linux/mediatek/patches-4.14/0145-clk-mediatek-Add-dt-bindings-for-MT2712-clocks.patch446
-rw-r--r--target/linux/mediatek/patches-4.14/0146-clk-mediatek-Add-MT2712-clock-support.patch2296
-rw-r--r--target/linux/mediatek/patches-4.14/0147-dt-bindings-clock-mediatek-document-clk-bindings-for.patch190
-rw-r--r--target/linux/mediatek/patches-4.14/0149-clk-mediatek-add-clocks-dt-bindings-required-header-.patch310
-rw-r--r--target/linux/mediatek/patches-4.14/0150-clk-mediatek-add-clock-support-for-MT7622-SoC.patch1388
-rw-r--r--target/linux/mediatek/patches-4.14/0151-arm64-dts-mt8173-remove-mediatek-mt8135-mmc-from-mmc.patch61
-rw-r--r--target/linux/mediatek/patches-4.14/0152-mmc-mediatek-make-hs400_tune_response-only-for-mt817.patch70
-rw-r--r--target/linux/mediatek/patches-4.14/0153-mmc-mediatek-add-pad_tune0-support.patch256
-rw-r--r--target/linux/mediatek/patches-4.14/0154-mmc-mediatek-add-async-fifo-and-data-tune-support.patch170
-rw-r--r--target/linux/mediatek/patches-4.14/0155-mmc-mediatek-add-busy_check-support.patch67
-rw-r--r--target/linux/mediatek/patches-4.14/0156-mmc-mediatek-add-stop_clk-fix-and-enhance_rx-support.patch168
-rw-r--r--target/linux/mediatek/patches-4.14/0157-mmc-mediatek-add-support-of-source_cg-clock.patch85
-rw-r--r--target/linux/mediatek/patches-4.14/0158-mmc-mediatek-add-latch-ck-support.patch45
-rw-r--r--target/linux/mediatek/patches-4.14/0159-mmc-mediatek-improve-eMMC-hs400-mode-read-performanc.patch68
-rw-r--r--target/linux/mediatek/patches-4.14/0160-mmc-mediatek-perfer-to-use-rise-edge-latching-for-cm.patch28
-rw-r--r--target/linux/mediatek/patches-4.14/0161-pwm-mediatek-Add-MT2712-MT7622-support.patch145
-rw-r--r--target/linux/mediatek/patches-4.14/0162-mtd-nand-mtk-use-nand_reset-to-reset-NAND-devices-in.patch41
-rw-r--r--target/linux/mediatek/patches-4.14/0164-cpufreq-mediatek-add-mt2712-into-compatible-list.patch24
-rw-r--r--target/linux/mediatek/patches-4.14/0165-mtd-nand-mtk-update-DT-bindings.patch41
-rw-r--r--target/linux/mediatek/patches-4.14/0166-mtd-nand-mtk-Support-different-MTK-NAND-flash-contro.patch380
-rw-r--r--target/linux/mediatek/patches-4.14/0167-mtd-nand-mtk-Support-MT7622-NAND-flash-controller.patch109
-rw-r--r--target/linux/mediatek/patches-4.14/0168-mmc-dt-bindings-add-mmc-support-to-MT7623-SoC.patch26
-rw-r--r--target/linux/mediatek/patches-4.14/0169-dt-bindings-pinctrl-add-bindings-for-MediaTek-MT7622.patch371
-rw-r--r--target/linux/mediatek/patches-4.14/0170-pinctrl-mediatek-cleanup-for-placing-all-drivers-und.patch32
-rw-r--r--target/linux/mediatek/patches-4.14/0171-pinctrl-mediatek-add-pinctrl-driver-for-MT7622-SoC.patch1675
-rw-r--r--target/linux/mediatek/patches-4.14/0172-clk-mediatek-group-drivers-under-indpendent-menu.patch223
-rw-r--r--target/linux/mediatek/patches-4.14/0173-clk-mediatek-fixup-test-building-of-MediaTek-clock-d.patch27
-rw-r--r--target/linux/mediatek/patches-4.14/0174-dt-bindings-net-mediatek-add-condition-to-property-m.patch27
-rw-r--r--target/linux/mediatek/patches-4.14/0175-net-mediatek-remove-superfluous-pin-setup-for-MT7622.patch102
-rw-r--r--target/linux/mediatek/patches-4.14/0176-clk-mediatek-Fix-all-warnings-for-missing-struct-clk.patch68
-rw-r--r--target/linux/mediatek/patches-4.14/0178-phy-phy-mtk-tphy-make-shared-banks-optional-for-V1-T.patch30
-rw-r--r--target/linux/mediatek/patches-4.14/0179-phy-phy-mtk-tphy-use-of_device_get_match_data.patch51
-rw-r--r--target/linux/mediatek/patches-4.14/0180-ASoC-mediatek-fix-error-handling-in-mt2701_afe_pcm_d.patch81
-rw-r--r--target/linux/mediatek/patches-4.14/0181-ASoC-mediatek-rework-clock-functions-for-MT2701.patch919
-rw-r--r--target/linux/mediatek/patches-4.14/0182-ASoC-mediatek-cleanup-audio-driver-for-MT2701.patch428
-rw-r--r--target/linux/mediatek/patches-4.14/0183-ASoC-mediatek-update-clock-related-properties-of-MT2.patch258
-rw-r--r--target/linux/mediatek/patches-4.14/0184-ASoC-mediatek-add-some-core-clocks-for-MT2701-AFE.patch93
-rw-r--r--target/linux/mediatek/patches-4.14/0185-ASoC-mediatek-modify-MT2701-AFE-driver-to-adapt-mfd-.patch128
-rw-r--r--target/linux/mediatek/patches-4.14/0186-ASoC-mediatek-update-MT2701-AFE-documentation-to-ada.patch214
-rw-r--r--target/linux/mediatek/patches-4.14/0187-usb-mtu3-fix-error-code-for-getting-extcon-device.patch26
-rw-r--r--target/linux/mediatek/patches-4.14/0188-usb-mtu3-supports-remote-wakeup-for-mt2712-with-two-.patch233
-rw-r--r--target/linux/mediatek/patches-4.14/0189-dt-bindings-usb-mtu3-update-USB-wakeup-properties.patch47
-rw-r--r--target/linux/mediatek/patches-4.14/0190-usb-xhci-mtk-supports-remote-wakeup-for-mt2712-with-.patch265
-rw-r--r--target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch138
-rw-r--r--target/linux/mediatek/patches-4.14/0192-dt-bindings-usb-mtk-xhci-update-USB-wakeup-propertie.patch49
-rw-r--r--target/linux/mediatek/patches-4.14/0193-clk-mediatek-adjust-dependency-of-reset.c-to-avoid-u.patch71
-rw-r--r--target/linux/mediatek/patches-4.14/0194-pinctrl-mediatek-mt7622-fix-potential-uninitialized-.patch49
-rw-r--r--target/linux/mediatek/patches-4.14/0195-pinctrl-mediatek-mt7622-align-error-handling-of-mtk_.patch50
-rw-r--r--target/linux/mediatek/patches-4.14/0196-mtd-mtk-nor-modify-functions-name-more-generally.patch554
-rw-r--r--target/linux/mediatek/patches-4.14/0197-hwrng-mediatek-Setup-default-RNG-quality.patch25
-rw-r--r--target/linux/mediatek/patches-4.14/0198-dt-bindings-thermal-add-binding-for-MT7622-SoC.patch26
-rw-r--r--target/linux/mediatek/patches-4.14/0199-thermal-mtk-Cleanup-unused-defines.patch51
-rw-r--r--target/linux/mediatek/patches-4.14/0200-thermal-mediatek-add-support-for-MT7622-SoC.patch81
-rw-r--r--target/linux/mediatek/patches-4.14/0201-dt-bindings-clock-mediatek-add-missing-required-rese.patch64
-rw-r--r--target/linux/mediatek/patches-4.14/0202-mmc-dt-bindings-add-support-for-MT7622-SoC.patch22
-rw-r--r--target/linux/mediatek/patches-4.14/0203-mmc-mediatek-add-support-for-MT7622-SoC.patch42
-rw-r--r--target/linux/mediatek/patches-4.14/0204-dt-bindings-dmaengine-Add-MediaTek-High-Speed-DMA-co.patch51
-rw-r--r--target/linux/mediatek/patches-4.14/0205-dmaengine-mediatek-Add-MediaTek-High-Speed-DMA-contr.patch1128
-rw-r--r--target/linux/mediatek/patches-4.14/0206-dt-bindings-clock-mediatek-update-audsys-documentati.patch45
-rw-r--r--target/linux/mediatek/patches-4.14/0207-dt-bindings-clock-mediatek-add-audsys-support-for-MT.patch23
-rw-r--r--target/linux/mediatek/patches-4.14/0208-clk-mediatek-update-missing-clock-data-for-MT7622-au.patch38
-rw-r--r--target/linux/mediatek/patches-4.14/0209-clk-mediatek-add-devm_of_platform_populate-for-MT762.patch42
-rw-r--r--target/linux/mediatek/patches-4.14/0210-arm64-dts-mt7622-add-clock-controller-device-nodes.patch130
-rw-r--r--target/linux/mediatek/patches-4.14/0211-arm64-dts-mt7622-add-power-domain-controller-device-.patch45
-rw-r--r--target/linux/mediatek/patches-4.14/0212-arm64-dts-mt7622-add-pinctrl-related-device-nodes.patch252
-rw-r--r--target/linux/mediatek/patches-4.14/0213-arm64-dts-mt7622-add-PMIC-MT6380-related-nodes.patch155
-rw-r--r--target/linux/mediatek/patches-4.14/0214-arm64-dts-mt7622-add-cpufreq-related-device-nodes.patch112
-rw-r--r--target/linux/mediatek/patches-4.14/0215-arm64-dts-mt7622-turn-uart0-clock-to-real-ones.patch45
-rw-r--r--target/linux/mediatek/patches-4.14/0216-arm64-dts-mt7622-add-SoC-and-peripheral-related-devi.patch420
-rw-r--r--target/linux/mediatek/patches-4.14/0217-arm64-dts-mt7622-add-flash-related-device-nodes.patch96
-rw-r--r--target/linux/mediatek/patches-4.14/0218-arm64-dts-mt7622-add-ethernet-device-nodes.patch84
-rw-r--r--target/linux/mediatek/patches-4.14/0219-arm64-dts-mt7622-add-PCIe-device-nodes.patch116
-rw-r--r--target/linux/mediatek/patches-4.14/0220-arm64-dts-mt7622-add-SATA-device-nodes.patch87
-rw-r--r--target/linux/mediatek/patches-4.14/0221-arm64-dts-mt7622-add-usb-device-nodes.patch119
-rw-r--r--target/linux/mediatek/patches-4.14/0222-arm64-dts-mt7622-add-High-Speed-DMA-device-nodes.patch31
-rw-r--r--target/linux/mediatek/patches-4.14/0223-arm64-dts-mt7622-add-mmc-related-device-nodes.patch200
-rw-r--r--target/linux/mediatek/patches-4.14/0224-add-mt7622-defconfig-for-testing-these-new-drivers.patch288
-rw-r--r--target/linux/mediatek/patches-4.14/0225-arm-dts-Add-missing-mt7623-pcie-nodes.patch123
-rw-r--r--target/linux/mediatek/patches-4.14/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch66
-rw-r--r--target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch413
142 files changed, 0 insertions, 24602 deletions
diff --git a/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
deleted file mode 100644
index 62a876c02f..0000000000
--- a/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "Bananapi BPI-R64";
- compatible = "bananapi,bpi-r64", "mediatek,mt7622";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- factory {
- label = "factory";
- linux,code = <BTN_0>;
- gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- green {
- label = "bpi-r64:pio:green";
- gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- red {
- label = "bpi-r64:pio:red";
- gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <&ethsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory {
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&bch {
- status = "disabled";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-&eth {
- pinctrl-names = "default";
- pinctrl-0 = <&eth_pins>;
- status = "okay";
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy5>;
- };
-
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "sgmii";
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <&parallel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- };
-
- pcie@1,0 {
- status = "okay";
- };
-};
-
-&pio {
- /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
- * SATA functions. i.e. output-high: PCIe, output-low: SATA
- */
- asm_sel {
- gpio-hog;
- gpios = <90 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&sata {
- status = "disable";
-};
-
-&sata_phy {
- status = "disable";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <&reg_3p3v>;
- vbus-supply = <&reg_5v>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 54 0>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port5: port@5 {
- compatible = "mediatek,mt753x-port";
- reg = <5>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-
diff --git a/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-lynx-rfb1.dts b/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-lynx-rfb1.dts
deleted file mode 100644
index f8423fcb60..0000000000
--- a/target/linux/mediatek/files-4.14/arch/arm64/boot/dts/mediatek/mt7622-lynx-rfb1.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "MediaTek MT7622 RFB1 board";
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- poll-interval = <100>;
-
- factory {
- label = "factory";
- linux,code = <BTN_0>;
- gpios = <&pio 0 0>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 0>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <&ethsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&pcie {
- pinctrl-names = "default", "pcie1_pins";
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-1 = <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- };
-
- pcie@1,0 {
- status = "okay";
- };
-
-};
-
-&pio {
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&bch {
- status = "okay";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-&eth {
- status = "okay";
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 54 0>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port5: port@5 {
- compatible = "mediatek,mt753x-port";
- reg = <5>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <&parallel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <&reg_3p3v>;
- vbus-supply = <&reg_5v>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
diff --git a/target/linux/mediatek/mt7622/config-4.14 b/target/linux/mediatek/mt7622/config-4.14
deleted file mode 100644
index eab9aa247f..0000000000
--- a/target/linux/mediatek/mt7622/config-4.14
+++ /dev/null
@@ -1,446 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_ACPI is not set
-CONFIG_AHCI_MTK=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-CONFIG_ARM64_HW_AFDBM=y
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_CORE is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-CONFIG_ARM64_VHE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_BOUNCE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_BT=y
-CONFIG_BT_DEBUGFS=y
-CONFIG_BT_HCIUART=y
-# CONFIG_BT_HCIUART_BCM is not set
-# CONFIG_BT_HCIUART_INTEL is not set
-# CONFIG_BT_HCIUART_NOKIA is not set
-CONFIG_BT_HCIUART_SERDEV=y
-CONFIG_BT_HCIVHCI=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLOCK_THERMAL=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-CONFIG_COMMON_CLK_MT2712=y
-# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set
-# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
-# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set
-# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set
-# CONFIG_COMMON_CLK_MT2712_MMSYS is not set
-# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
-# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
-# CONFIG_COMMON_CLK_MT6797 is not set
-CONFIG_COMMON_CLK_MT7622=y
-CONFIG_COMMON_CLK_MT7622_AUDSYS=y
-CONFIG_COMMON_CLK_MT7622_ETHSYS=y
-CONFIG_COMMON_CLK_MT7622_HIFSYS=y
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-# CONFIG_CPUFREQ_DT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECDH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_KPP=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ARM_SMCCC=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HW_RANDOM_MTK is not set
-# CONFIG_I2C_MT65XX is not set
-CONFIG_ICPLUS_PHY=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JUMP_LABEL=y
-CONFIG_LEDS_MT6323=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEDIATEK_MT6577_AUXADC=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
-CONFIG_MFD_CORE=y
-CONFIG_MFD_MT6397=y
-CONFIG_MFD_SYSCON=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MMC=y
-CONFIG_MMC_MTK=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_MT81xx_NOR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-# CONFIG_MTD_OF_PARTS is not set
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MTK_EFUSE is not set
-CONFIG_MTK_HSDMA=y
-CONFIG_MTK_INFRACFG=y
-CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MTK_SCPSYS=y
-CONFIG_MTK_THERMAL=y
-CONFIG_MTK_TIMER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET_CADENCE is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-# CONFIG_NUMA is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_BUS_ADDR_T_64BIT=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MTK_TPHY=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_MT6397 is not set
-CONFIG_PINCTRL_MT7622=y
-# CONFIG_PINCTRL_MT8173 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MT6323=y
-CONFIG_REGULATOR_MT6380=y
-# CONFIG_REGULATOR_MT6397 is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MT6397 is not set
-CONFIG_RTC_DRV_MT7622=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT65XX=y
-CONFIG_SRCU=y
-CONFIG_SWAP=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
-CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
-CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
-CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
-CONFIG_WATCHDOG_SYSFS=y
-CONFIG_XPS=y
diff --git a/target/linux/mediatek/mt7623/config-4.14 b/target/linux/mediatek/mt7623/config-4.14
deleted file mode 100644
index 35c738a940..0000000000
--- a/target/linux/mediatek/mt7623/config-4.14
+++ /dev/null
@@ -1,502 +0,0 @@
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_STACKPROTECTOR=y
-# CONFIG_CC_STACKPROTECTOR_NONE is not set
-CONFIG_CC_STACKPROTECTOR_REGULAR=y
-CONFIG_CLEANCACHE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-CONFIG_COMMON_CLK_MT2701=y
-CONFIG_COMMON_CLK_MT2701_BDPSYS=y
-CONFIG_COMMON_CLK_MT2701_ETHSYS=y
-CONFIG_COMMON_CLK_MT2701_HIFSYS=y
-CONFIG_COMMON_CLK_MT2701_IMGSYS=y
-CONFIG_COMMON_CLK_MT2701_MMSYS=y
-CONFIG_COMMON_CLK_MT2701_VDECSYS=y
-# CONFIG_COMMON_CLK_MT7622 is not set
-# CONFIG_COMMON_CLK_MT8135 is not set
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_COREDUMP=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_MEDIATEK=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MT6589_UART0=y
-# CONFIG_DEBUG_MT8127_UART0 is not set
-# CONFIG_DEBUG_MT8135_UART3 is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0x11004000
-CONFIG_DEBUG_UART_VIRT=0xf1004000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_EXT4_FS=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MTK=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MT65XX=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_INITRAMFS_COMPRESSION=""
-CONFIG_INITRAMFS_ROOT_GID=1000
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-arm_cortex-a7_musl-1.1.14_eabi/root-mediatek /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_MT6323=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_MT2701 is not set
-# CONFIG_MACH_MT6589 is not set
-# CONFIG_MACH_MT6592 is not set
-CONFIG_MACH_MT7623=y
-# CONFIG_MACH_MT8127 is not set
-# CONFIG_MACH_MT8135 is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEDIATEK_MT6577_AUXADC=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_MT6397=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MTK=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MT81xx_NOR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_EFUSE=y
-# CONFIG_MTK_HSDMA is not set
-CONFIG_MTK_INFRACFG=y
-# CONFIG_MTK_IOMMU is not set
-# CONFIG_MTK_IOMMU_V1 is not set
-CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MTK_SCPSYS=y
-CONFIG_MTK_THERMAL=y
-CONFIG_MTK_TIMER=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_SWITCHDEV=y
-# CONFIG_NET_VENDOR_AURORA is not set
-CONFIG_NET_VENDOR_MEDIATEK=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_MTK_TPHY=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MT2701=y
-CONFIG_PINCTRL_MT6397=y
-CONFIG_PINCTRL_MTK=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MT6323=y
-# CONFIG_REGULATOR_MT6380 is not set
-# CONFIG_REGULATOR_MT6397 is not set
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_MT6397 is not set
-# CONFIG_RTC_DRV_MT7622 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT65XX=y
-CONFIG_SPMI=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch b/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch
deleted file mode 100644
index a443adfe64..0000000000
--- a/target/linux/mediatek/patches-4.14/0006-reset-mediatek-mt2701-reset-driver.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 596c3a7300c0419dba71d58cbd4136e0d1e12a4e Mon Sep 17 00:00:00 2001
-From: Shunli Wang <shunli.wang@mediatek.com>
-Date: Tue, 5 Jan 2016 14:30:22 +0800
-Subject: [PATCH 06/57] reset: mediatek: mt2701 reset driver
-
-In infrasys and perifsys, there are many reset
-control bits for kinds of modules. These bits are
-used as actual reset controllers to be registered
-into kernel's generic reset controller framework.
-
-Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
-Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/clk/mediatek/clk-mt2701.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -772,6 +772,8 @@ static void mtk_infrasys_init_early(stru
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
- __func__, r);
-+
-+ mtk_register_reset_controller(node, 2, 0x30);
- }
- CLK_OF_DECLARE_DRIVER(mtk_infra, "mediatek,mt2701-infracfg",
- mtk_infrasys_init_early);
diff --git a/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch b/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
deleted file mode 100644
index 33ede7d3a6..0000000000
--- a/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 0e60d2112968ccb2570535bf19fb5020c9b28c08 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Apr 2016 07:18:35 +0200
-Subject: [PATCH 12/57] clk: dont disable unused clocks
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/clk/clk.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/clk.c
-+++ b/drivers/clk/clk.c
-@@ -797,7 +797,7 @@ unlock_out:
- clk_core_disable_unprepare(core->parent);
- }
-
--static bool clk_ignore_unused;
-+static bool clk_ignore_unused = true;
- static int __init clk_ignore_unused_setup(char *__unused)
- {
- clk_ignore_unused = true;
diff --git a/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch b/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch
deleted file mode 100644
index 3ea2f456a8..0000000000
--- a/target/linux/mediatek/patches-4.14/0027-net-next-mediatek-fix-DQL-support.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From f974e397b806f7b16d11cc1542538616291924f1 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Apr 2016 11:57:21 +0200
-Subject: [PATCH 27/57] net-next: mediatek: fix DQL support
-
-The MTK ethernet core has 2 MACs both sitting on the same DMA ring. The
-current code will assign the TX traffic of each MAC to its own DQL. This
-results in the amount of data, that DQL says is in the queue incorrect. As
-the data from multiple devices is infact enqueued. This makes any decision
-based on these value non deterministic. Fix this by tracking all TX
-traffic, regardless of the MAC it belongs to in the DQL of all devices
-using the DMA.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 +++++++++++++++++------------
- 1 file changed, 21 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -779,7 +779,16 @@ static int mtk_tx_map(struct sk_buff *sk
- WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
- (!nr_frags * TX_DMA_LS0)));
-
-- netdev_sent_queue(dev, skb->len);
-+ /* we have a single DMA ring so BQL needs to be updated for all devices
-+ * sitting on this ring
-+ */
-+ for (i = 0; i < MTK_MAC_COUNT; i++) {
-+ if (!eth->netdev[i])
-+ continue;
-+
-+ netdev_sent_queue(eth->netdev[i], skb->len);
-+ }
-+
- skb_tx_timestamp(skb);
-
- ring->next_free = mtk_qdma_phys_to_virt(ring, txd->txd2);
-@@ -1076,20 +1085,17 @@ static int mtk_poll_tx(struct mtk_eth *e
- struct mtk_tx_dma *desc;
- struct sk_buff *skb;
- struct mtk_tx_buf *tx_buf;
-- unsigned int done[MTK_MAX_DEVS];
-- unsigned int bytes[MTK_MAX_DEVS];
-+ int total = 0, done = 0;
-+ unsigned int bytes = 0;
- u32 cpu, dma;
-- int total = 0, i;
--
-- memset(done, 0, sizeof(done));
-- memset(bytes, 0, sizeof(bytes));
-+ int i;
-
- cpu = mtk_r32(eth, MTK_QTX_CRX_PTR);
- dma = mtk_r32(eth, MTK_QTX_DRX_PTR);
-
- desc = mtk_qdma_phys_to_virt(ring, cpu);
-
-- while ((cpu != dma) && budget) {
-+ while ((cpu != dma) && (done < budget)) {
- u32 next_cpu = desc->txd2;
- int mac = 0;
-
-@@ -1106,9 +1112,8 @@ static int mtk_poll_tx(struct mtk_eth *e
- break;
-
- if (skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC) {
-- bytes[mac] += skb->len;
-- done[mac]++;
-- budget--;
-+ bytes += skb->len;
-+ done++;
- }
- mtk_tx_unmap(eth, tx_buf);
-
-@@ -1120,11 +1125,13 @@ static int mtk_poll_tx(struct mtk_eth *e
-
- mtk_w32(eth, cpu, MTK_QTX_CRX_PTR);
-
-+ /* we have a single DMA ring so BQL needs to be updated for all devices
-+ * sitting on this ring
-+ */
- for (i = 0; i < MTK_MAC_COUNT; i++) {
-- if (!eth->netdev[i] || !done[i])
-+ if (!eth->netdev[i])
- continue;
-- netdev_completed_queue(eth->netdev[i], done[i], bytes[i]);
-- total += done[i];
-+ netdev_completed_queue(eth->netdev[i], done, bytes);
- }
-
- if (mtk_queue_stopped(eth) &&
diff --git a/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch b/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch
deleted file mode 100644
index c01703d07b..0000000000
--- a/target/linux/mediatek/patches-4.14/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 52e9ce30a2b3c414e0efb20632fefa7cfc5096e6 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 14:44:18 +0200
-Subject: [PATCH 32/57] net: dsa: mediatek: add support for GMAC2 wired to ext
- phy
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/dsa/mt7530.c | 5 +++++
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -991,6 +991,11 @@ mt7530_setup(struct dsa_switch *ds)
- val = mt7530_read(priv, MT7530_MHWTRAP);
- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
- val |= MHWTRAP_MANUAL;
-+ if (!dsa_is_cpu_port(ds, 5)) {
-+ val |= MHWTRAP_P5_DIS;
-+ val |= MHWTRAP_P5_MAC_SEL;
-+ val |= MHWTRAP_P5_RGMII_MODE;
-+ }
- mt7530_write(priv, MT7530_MHWTRAP, val);
-
- /* Enable and reset MIB counters */
diff --git a/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch b/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch
deleted file mode 100644
index 0442506977..0000000000
--- a/target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch
+++ /dev/null
@@ -1,268 +0,0 @@
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -670,6 +670,9 @@ static int
- mt7530_cpu_port_enable(struct mt7530_priv *priv,
- int port)
- {
-+ u8 port_mask = 0;
-+ int i;
-+
- /* Enable Mediatek header mode on the cpu port */
- mt7530_write(priv, MT7530_PVC_P(port),
- PORT_SPEC_TAG);
-@@ -686,8 +689,12 @@ mt7530_cpu_port_enable(struct mt7530_pri
- /* CPU port gets connected to all user ports of
- * the switch
- */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ if ((priv->ds->enabled_port_mask & BIT(i)) &&
-+ (dsa_port_upstream_port(priv->ds, i) == port))
-+ port_mask |= BIT(i);
- mt7530_write(priv, MT7530_PCR_P(port),
-- PCR_MATRIX(priv->ds->enabled_port_mask));
-+ PCR_MATRIX(port_mask));
-
- return 0;
- }
-@@ -697,6 +704,7 @@ mt7530_port_enable(struct dsa_switch *ds
- struct phy_device *phy)
- {
- struct mt7530_priv *priv = ds->priv;
-+ u8 upstream = dsa_port_upstream_port(ds, port);
-
- mutex_lock(&priv->reg_mutex);
-
-@@ -707,7 +715,7 @@ mt7530_port_enable(struct dsa_switch *ds
- * restore the port matrix if the port is the member of a certain
- * bridge.
- */
-- priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
-+ priv->ports[port].pm |= PCR_MATRIX(BIT(upstream));
- priv->ports[port].enable = true;
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- priv->ports[port].pm);
-@@ -770,7 +778,8 @@ mt7530_port_bridge_join(struct dsa_switc
- struct net_device *bridge)
- {
- struct mt7530_priv *priv = ds->priv;
-- u32 port_bitmap = BIT(MT7530_CPU_PORT);
-+ u8 upstream = dsa_port_upstream_port(ds, port);
-+ u32 port_bitmap = BIT(upstream);
- int i;
-
- mutex_lock(&priv->reg_mutex);
-@@ -808,6 +817,7 @@ mt7530_port_bridge_leave(struct dsa_swit
- struct net_device *bridge)
- {
- struct mt7530_priv *priv = ds->priv;
-+ u8 upstream = dsa_port_upstream_port(ds, port);
- int i;
-
- mutex_lock(&priv->reg_mutex);
-@@ -832,8 +842,8 @@ mt7530_port_bridge_leave(struct dsa_swit
- */
- if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
-- PCR_MATRIX(BIT(MT7530_CPU_PORT)));
-- priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));
-+ PCR_MATRIX(BIT(upstream)));
-+ priv->ports[port].pm = PCR_MATRIX(BIT(upstream));
-
- mutex_unlock(&priv->reg_mutex);
- }
-@@ -908,15 +918,7 @@ err:
- static enum dsa_tag_protocol
- mtk_get_tag_protocol(struct dsa_switch *ds)
- {
-- struct mt7530_priv *priv = ds->priv;
--
-- if (!dsa_is_cpu_port(ds, MT7530_CPU_PORT)) {
-- dev_warn(priv->dev,
-- "port not matched with tagging CPU port\n");
-- return DSA_TAG_PROTO_NONE;
-- } else {
-- return DSA_TAG_PROTO_MTK;
-- }
-+ return DSA_TAG_PROTO_MTK;
- }
-
- static int
-@@ -989,7 +991,7 @@ mt7530_setup(struct dsa_switch *ds)
-
- /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
- val = mt7530_read(priv, MT7530_MHWTRAP);
-- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
-+ val &= ~MHWTRAP_P5_DIS & ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
- val |= MHWTRAP_MANUAL;
- if (!dsa_is_cpu_port(ds, 5)) {
- val |= MHWTRAP_P5_DIS;
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -185,6 +185,10 @@ struct dsa_port {
- u8 stp_state;
- struct net_device *bridge_dev;
- struct devlink_port devlink_port;
-+
-+ struct net_device *ethernet;
-+ int upstream;
-+
- /*
- * Original copy of the master netdev ethtool_ops
- */
-@@ -266,6 +270,11 @@ static inline bool dsa_is_normal_port(st
- return !dsa_is_cpu_port(ds, p) && !dsa_is_dsa_port(ds, p);
- }
-
-+static inline bool dsa_is_upstream_port(struct dsa_switch *ds, int p)
-+{
-+ return dsa_is_cpu_port(ds, p) || dsa_is_dsa_port(ds, p);
-+}
-+
- static inline u8 dsa_upstream_port(struct dsa_switch *ds)
- {
- struct dsa_switch_tree *dst = ds->dst;
-@@ -282,6 +291,18 @@ static inline u8 dsa_upstream_port(struc
- return ds->rtable[dst->cpu_dp->ds->index];
- }
-
-+static inline u8 dsa_port_upstream_port(struct dsa_switch *ds, int port)
-+{
-+ /*
-+ * If this port has a specific upstream cpu port, use it,
-+ * otherwise use the switch default.
-+ */
-+ if (ds->ports[port].upstream)
-+ return ds->ports[port].upstream;
-+ else
-+ return dsa_upstream_port(ds);
-+}
-+
- typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid,
- bool is_static, void *data);
- struct dsa_switch_ops {
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -253,6 +253,8 @@ static int dsa_cpu_port_apply(struct dsa
- memset(&port->devlink_port, 0, sizeof(port->devlink_port));
- err = devlink_port_register(ds->devlink, &port->devlink_port,
- port->index);
-+ if (port->netdev)
-+ port->netdev->dsa_ptr = ds->dst;
- return err;
- }
-
-@@ -262,6 +264,12 @@ static void dsa_cpu_port_unapply(struct
- dsa_cpu_dsa_destroy(port);
- port->ds->cpu_port_mask &= ~BIT(port->index);
-
-+ if (port->netdev)
-+ port->netdev->dsa_ptr = NULL;
-+ if (port->ethernet) {
-+ dev_put(port->ethernet);
-+ port->ethernet = NULL;
-+ }
- }
-
- static int dsa_user_port_apply(struct dsa_port *port)
-@@ -505,10 +513,9 @@ static int dsa_cpu_parse(struct dsa_port
- dev_put(ethernet_dev);
- }
-
-- if (!dst->cpu_dp) {
-+ if (!dst->cpu_dp)
- dst->cpu_dp = port;
-- dst->cpu_dp->netdev = ethernet_dev;
-- }
-+ port->netdev = ethernet_dev;
-
- /* Initialize cpu_port_mask now for drv->setup()
- * to have access to a correct value, just like what
-@@ -526,6 +533,29 @@ static int dsa_cpu_parse(struct dsa_port
-
- dst->rcv = dst->tag_ops->rcv;
-
-+ dev_hold(ethernet_dev);
-+ ds->ports[index].ethernet = ethernet_dev;
-+ ds->cpu_port_mask |= BIT(index);
-+
-+ return 0;
-+}
-+
-+static int dsa_user_parse(struct dsa_port *port, u32 index,
-+ struct dsa_switch *ds)
-+{
-+ struct device_node *cpu_port;
-+ const unsigned int *cpu_port_reg;
-+ int cpu_port_index;
-+
-+ cpu_port = of_parse_phandle(port->dn, "cpu", 0);
-+ if (cpu_port) {
-+ cpu_port_reg = of_get_property(cpu_port, "reg", NULL);
-+ if (!cpu_port_reg)
-+ return -EINVAL;
-+ cpu_port_index = be32_to_cpup(cpu_port_reg);
-+ ds->ports[index].upstream = cpu_port_index;
-+ }
-+
- return 0;
- }
-
-@@ -533,7 +563,7 @@ static int dsa_ds_parse(struct dsa_switc
- {
- struct dsa_port *port;
- u32 index;
-- int err;
-+ int err = 0;
-
- for (index = 0; index < ds->num_ports; index++) {
- port = &ds->ports[index];
-@@ -546,6 +576,9 @@ static int dsa_ds_parse(struct dsa_switc
- if (err)
- return err;
- } else {
-+ err = dsa_user_parse(port, index, ds);
-+ if (err)
-+ return err;
- /* Initialize enabled_port_mask now for drv->setup()
- * to have access to a correct value, just like what
- * net/dsa/dsa.c::dsa_switch_setup_one does.
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -91,6 +91,8 @@ struct dsa_slave_priv {
-
- /* TC context */
- struct list_head mall_tc_list;
-+
-+ struct net_device *master;
- };
-
- /* dsa.c */
-@@ -177,6 +179,9 @@ extern const struct dsa_device_ops trail
-
- static inline struct net_device *dsa_master_netdev(struct dsa_slave_priv *p)
- {
-+ if (p->master)
-+ return p->master;
-+
- return p->dp->cpu_dp->netdev;
- }
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1267,7 +1267,7 @@ int dsa_slave_create(struct dsa_port *po
- int ret;
-
- cpu_dp = ds->dst->cpu_dp;
-- master = cpu_dp->netdev;
-+ master = ds->ports[port->upstream].ethernet;
-
- if (!ds->num_tx_queues)
- ds->num_tx_queues = 1;
-@@ -1305,6 +1305,7 @@ int dsa_slave_create(struct dsa_port *po
- p->dp = port;
- INIT_LIST_HEAD(&p->mall_tc_list);
- p->xmit = dst->tag_ops->xmit;
-+ p->master = master;
-
- p->old_pause = -1;
- p->old_link = -1;
diff --git a/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch b/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch
deleted file mode 100644
index d934155001..0000000000
--- a/target/linux/mediatek/patches-4.14/0035-net-mediatek-disable-RX-VLan-offloading.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 35b83b85e752a6660b92f08c0fb912308f25cf6d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 15:56:40 +0200
-Subject: [PATCH 35/57] net: mediatek: disable RX VLan offloading
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 ++++++---
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 --
- 2 files changed, 6 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -709,8 +709,8 @@ static int mtk_tx_map(struct sk_buff *sk
- txd4 |= TX_DMA_CHKSUM;
-
- /* VLAN header offload */
-- if (skb_vlan_tag_present(skb))
-- txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
-+// if (skb_vlan_tag_present(skb))
-+// txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
-
- mapped_addr = dma_map_single(eth->dev, skb->data,
- skb_headlen(skb), DMA_TO_DEVICE);
-@@ -1981,7 +1981,10 @@ static int mtk_hw_init(struct mtk_eth *e
- mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
-
- /* Enable RX VLan Offloading */
-- mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-+ if (MTK_HW_FEATURES & NETIF_F_HW_VLAN_CTAG_RX)
-+ mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-+ else
-+ mtk_w32(eth, 0, MTK_CDMP_EG_CTRL);
-
- /* enable interrupt delay for RX */
- mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -34,8 +34,6 @@
- NETIF_MSG_TX_ERR)
- #define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \
- NETIF_F_RXCSUM | \
-- NETIF_F_HW_VLAN_CTAG_TX | \
-- NETIF_F_HW_VLAN_CTAG_RX | \
- NETIF_F_SG | NETIF_F_TSO | \
- NETIF_F_TSO6 | \
- NETIF_F_IPV6_CSUM)
diff --git a/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch b/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch
deleted file mode 100644
index 8163e4475d..0000000000
--- a/target/linux/mediatek/patches-4.14/0042-net-next-mediatek-honour-special-tag-bit-inside-RX-D.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From a306af3b97c56b9e224a2f9ee04838a2d32ff60b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 9 Aug 2017 14:44:07 +0200
-Subject: [PATCH 42/57] net-next: mediatek: honour special tag bit inside RX
- DMA descriptor
-
-For HW NAT/QoS to work the DSA driver needs to turn the special tag bit
-inside the ingress control register on. This has the side effect that
-the code working out which ingress gmac we have breaks. Fix this by
-honouring the special tag bit inside the RX free descriptor.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 ++++++++++----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
- 2 files changed, 11 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -999,10 +999,16 @@ static int mtk_poll_rx(struct napi_struc
- if (!(trxd.rxd2 & RX_DMA_DONE))
- break;
-
-- /* find out which mac the packet come from. values start at 1 */
-- mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
-- RX_DMA_FPORT_MASK;
-- mac--;
-+ /* find out which mac the packet comes from. If the special tag is
-+ * we can assume that the traffic is coming from the builtin mt7530
-+ * and the DSA driver has loaded. FPORT will be the physical switch
-+ * port in this case rather than the FE forward port id. */
-+ if (!(trxd.rxd4 & RX_DMA_SP_TAG)) {
-+ /* values start at 1 */
-+ mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
-+ RX_DMA_FPORT_MASK;
-+ mac--;
-+ }
-
- if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
- !eth->netdev[mac]))
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -287,6 +287,7 @@
-
- /* QDMA descriptor rxd4 */
- #define RX_DMA_L4_VALID BIT(24)
-+#define RX_DMA_SP_TAG BIT(22)
- #define RX_DMA_FPORT_SHIFT 19
- #define RX_DMA_FPORT_MASK 0x7
-
diff --git a/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch b/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch
deleted file mode 100644
index a3ee4636f5..0000000000
--- a/target/linux/mediatek/patches-4.14/0043-net-next-mediatek-enable-special-tag-indication-for-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 53e3d9af39805a7e1ba81a047a9ab433be0e82f5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 9 Aug 2017 14:56:53 +0200
-Subject: [PATCH 43/57] net-next: mediatek: enable special tag indication for
- PDMA
-
-The Ingress special tag indication was only enabled for QDMA and not PDMA.
-Properly initialize the STAG bit. This broke HW NAT and Qos from working
-for traffic coming in via a DSA device. The PPE failed to properly parse
-the traffic as it was not expecting the special tag.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1985,6 +1985,8 @@ static int mtk_hw_init(struct mtk_eth *e
- */
- val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
- mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
-+ val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
-+ mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
-
- /* Enable RX VLan Offloading */
- if (MTK_HW_FEATURES & NETIF_F_HW_VLAN_CTAG_RX)
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -72,6 +72,10 @@
- #define MTK_CDMQ_IG_CTRL 0x1400
- #define MTK_CDMQ_STAG_EN BIT(0)
-
-+/* CDMP Ingress Control Register */
-+#define MTK_CDMP_IG_CTRL 0x400
-+#define MTK_CDMP_STAG_EN BIT(0)
-+
- /* CDMP Exgress Control Register */
- #define MTK_CDMP_EG_CTRL 0x404
-
diff --git a/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch b/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch
deleted file mode 100644
index 4a69e7aadf..0000000000
--- a/target/linux/mediatek/patches-4.14/0044-net-next-dsa-mediatek-tell-GDMA-when-we-are-turning-.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 6a5932028a4f3217ed7c9d602f269611d95dd8ca Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 9 Aug 2017 15:13:19 +0200
-Subject: [PATCH 44/57] net-next: dsa: mediatek: tell GDMA when we are turning
- on the special tag
-
-Enabling this bit will make the RX DMA descriptor enable the SP bit for all
-ingress traffic inside the return descriptor. The PPE needs this to know
-that a SP is present.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/dsa/mt7530.c | 5 +++++
- drivers/net/dsa/mt7530.h | 4 ++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -677,6 +677,11 @@ mt7530_cpu_port_enable(struct mt7530_pri
- mt7530_write(priv, MT7530_PVC_P(port),
- PORT_SPEC_TAG);
-
-+ /* Enable Mediatek header mode on the GMAC that the cpu port
-+ * connects to */
-+ regmap_write_bits(priv->ethernet, MTK_GDMA_FWD_CFG(port),
-+ GDMA_SPEC_TAG, GDMA_SPEC_TAG);
-+
- /* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK);
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -22,6 +22,10 @@
-
- #define TRGMII_BASE(x) (0x10000 + (x))
-
-+/* Registers for GDMA configuration access */
-+#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000))
-+#define GDMA_SPEC_TAG BIT(24)
-+
- /* Registers to ethsys access */
- #define ETHSYS_CLKCFG0 0x2c
- #define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
diff --git a/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch b/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch
deleted file mode 100644
index 55f1015770..0000000000
--- a/target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 1e33784f665cb95c2af5481d3e776d2d3099921b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 15:57:17 +0200
-Subject: [PATCH 45/57] net: dsa: mediatek: turn into platform driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/dsa/mt7530.c | 23 +++++++++++++++--------
- 1 file changed, 15 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1049,10 +1049,10 @@ static const struct dsa_switch_ops mt753
- };
-
- static int
--mt7530_probe(struct mdio_device *mdiodev)
-+mt7530_probe(struct platform_device *mdiodev)
- {
- struct mt7530_priv *priv;
-- struct device_node *dn;
-+ struct device_node *dn, *mdio;
-
- dn = mdiodev->dev.of_node;
-
-@@ -1100,7 +1100,12 @@ mt7530_probe(struct mdio_device *mdiodev
- }
- }
-
-- priv->bus = mdiodev->bus;
-+ mdio = of_parse_phandle(dn, "dsa,mii-bus", 0);
-+ if (!mdio)
-+ return -EINVAL;
-+ priv->bus = of_mdio_find_bus(mdio);
-+ if (!priv->bus)
-+ return -EPROBE_DEFER;
- priv->dev = &mdiodev->dev;
- priv->ds->priv = priv;
- priv->ds->ops = &mt7530_switch_ops;
-@@ -1110,8 +1115,8 @@ mt7530_probe(struct mdio_device *mdiodev
- return dsa_register_switch(priv->ds);
- }
-
--static void
--mt7530_remove(struct mdio_device *mdiodev)
-+static int
-+mt7530_remove(struct platform_device *mdiodev)
- {
- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
- int ret = 0;
-@@ -1128,6 +1133,8 @@ mt7530_remove(struct mdio_device *mdiode
-
- dsa_unregister_switch(priv->ds);
- mutex_destroy(&priv->reg_mutex);
-+
-+ return 0;
- }
-
- static const struct of_device_id mt7530_of_match[] = {
-@@ -1136,16 +1143,16 @@ static const struct of_device_id mt7530_
- };
- MODULE_DEVICE_TABLE(of, mt7530_of_match);
-
--static struct mdio_driver mt7530_mdio_driver = {
-+static struct platform_driver mtk_mt7530_driver = {
- .probe = mt7530_probe,
- .remove = mt7530_remove,
-- .mdiodrv.driver = {
-+ .driver = {
- .name = "mt7530",
- .of_match_table = mt7530_of_match,
- },
- };
-+module_platform_driver(mtk_mt7530_driver);
-
--mdio_module_driver(mt7530_mdio_driver);
-
- MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
- MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
diff --git a/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch b/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch
deleted file mode 100644
index 088914fda1..0000000000
--- a/target/linux/mediatek/patches-4.14/0046-net-mediatek-add-irq-delay.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 6e081074df96bf3762c2e6438c383f11a56b0a7e Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 15:58:04 +0200
-Subject: [PATCH 46/57] net: mediatek: add irq delay
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++++++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 +++++++-
- 2 files changed, 13 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1996,6 +1996,7 @@ static int mtk_hw_init(struct mtk_eth *e
-
- /* enable interrupt delay for RX */
- mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
-+ //mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_QDMA_DELAY_INT);
-
- /* disable delay and normal interrupt */
- mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
diff --git a/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch b/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch
deleted file mode 100644
index 81e984ccfa..0000000000
--- a/target/linux/mediatek/patches-4.14/0051-net-mediatek-increase-tx_timeout.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 5cbf53c7e5eac5bacc409461888789accdaf8eec Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 16:00:06 +0200
-Subject: [PATCH 51/57] net: mediatek: increase tx_timeout
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2455,7 +2455,7 @@ static int mtk_add_mac(struct mtk_eth *e
- mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET;
-
- SET_NETDEV_DEV(eth->netdev[id], eth->dev);
-- eth->netdev[id]->watchdog_timeo = 5 * HZ;
-+ eth->netdev[id]->watchdog_timeo = 30 * HZ;
- eth->netdev[id]->netdev_ops = &mtk_netdev_ops;
- eth->netdev[id]->base_addr = (unsigned long)eth->base;
-
diff --git a/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch b/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch
deleted file mode 100644
index bb49ee75e8..0000000000
--- a/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 18b2169d84b47a3414164e5e40f23fb7e875707c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 10 Aug 2017 16:00:28 +0200
-Subject: [PATCH 52/57] net: phy: add FC
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/phy/phy_device.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1944,7 +1944,7 @@ static struct phy_driver genphy_driver =
- .config_init = genphy_config_init,
- .features = PHY_GBIT_FEATURES | SUPPORTED_MII |
- SUPPORTED_AUI | SUPPORTED_FIBRE |
-- SUPPORTED_BNC,
-+ SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .config_aneg = genphy_config_aneg,
- .aneg_done = genphy_aneg_done,
- .read_status = genphy_read_status,
diff --git a/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch b/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch
deleted file mode 100644
index 9ce66ef487..0000000000
--- a/target/linux/mediatek/patches-4.14/0062-mdio-atomic.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -76,7 +76,10 @@ static int mtk_mdio_busy_wait(struct mtk
- return 0;
- if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
- break;
-- usleep_range(10, 20);
-+ if (in_atomic())
-+ udelay(10);
-+ else
-+ usleep_range(10, 20);
- }
-
- dev_err(eth->dev, "mdio: MDIO timeout\n");
diff --git a/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch b/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch
deleted file mode 100644
index 3263e656ae..0000000000
--- a/target/linux/mediatek/patches-4.14/0063-atomic-sleep.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -409,6 +409,7 @@ static int mtk_mdio_init(struct mtk_eth
-
- snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
- ret = of_mdiobus_register(eth->mii_bus, mii_np);
-+printk("%s:%s[%d]%d %p\n", __FILE__, __func__, __LINE__, ret, eth->mii_bus);
-
- err_put_node:
- of_node_put(mii_np);
-@@ -1472,7 +1473,10 @@ static void mtk_hwlro_rx_uninit(struct m
- for (i = 0; i < 10; i++) {
- val = mtk_r32(eth, MTK_PDMA_LRO_CTRL_DW0);
- if (val & MTK_LRO_RING_RELINQUISH_DONE) {
-- msleep(20);
-+ if (in_atomic())
-+ mdelay(20);
-+ else
-+ msleep(20);
- continue;
- }
- break;
-@@ -1869,7 +1873,10 @@ static void mtk_stop_dma(struct mtk_eth
- for (i = 0; i < 10; i++) {
- val = mtk_r32(eth, glo_cfg);
- if (val & (MTK_TX_DMA_BUSY | MTK_RX_DMA_BUSY)) {
-- msleep(20);
-+ if (in_atomic())
-+ mdelay(20);
-+ else
-+ msleep(20);
- continue;
- }
- break;
-@@ -1907,7 +1914,10 @@ static void ethsys_reset(struct mtk_eth
- reset_bits,
- reset_bits);
-
-- usleep_range(1000, 1100);
-+ if (in_atomic())
-+ udelay(1000);
-+ else
-+ usleep_range(1000, 1100);
- regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL,
- reset_bits,
- ~reset_bits);
diff --git a/target/linux/mediatek/patches-4.14/0064-dts.patch b/target/linux/mediatek/patches-4.14/0064-dts.patch
deleted file mode 100644
index ec9adfbb48..0000000000
--- a/target/linux/mediatek/patches-4.14/0064-dts.patch
+++ /dev/null
@@ -1,127 +0,0 @@
---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -21,6 +21,10 @@
- stdout-path = "serial2:115200n8";
- };
-
-+ memory {
-+ reg = <0 0x80000000 0 0x20000000>;
-+ };
-+
- cpus {
- cpu@0 {
- proc-supply = <&mt6323_vproc_reg>;
-@@ -103,6 +107,10 @@
- device_type = "memory";
- reg = <0 0x80000000 0 0x40000000>;
- };
-+
-+ mt7530: switch@0 {
-+ compatible = "mediatek,mt7530";
-+ };
- };
-
- &cir {
-@@ -130,11 +138,24 @@
- };
- };
-
-+ gmac1: mac@1 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <1>;
-+ phy-mode = "rgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
--
-- switch@0 {
-+ };
-+};
-+ &mt7530 {
- compatible = "mediatek,mt7530";
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -144,6 +165,8 @@
- core-supply = <&mt6323_vpa_reg>;
- io-supply = <&mt6323_vemc3v3_reg>;
-
-+ dsa,mii-bus = <&mdio>;
-+
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -152,29 +175,46 @@
- port@0 {
- reg = <0>;
- label = "wan";
-+ cpu = <&cpu_port1>;
- };
-
- port@1 {
- reg = <1>;
- label = "lan0";
-+ cpu = <&cpu_port0>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan1";
-+ cpu = <&cpu_port0>;
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
-+ cpu = <&cpu_port0>;
- };
-
- port@4 {
- reg = <4>;
- label = "lan3";
-+ cpu = <&cpu_port0>;
- };
-
-- port@6 {
-+ cpu_port1: port@5 {
-+ reg = <5>;
-+ label = "cpu";
-+ ethernet = <&gmac1>;
-+ phy-mode = "rgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ cpu_port0: port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
-@@ -187,8 +227,6 @@
- };
- };
- };
-- };
--};
-
- &i2c0 {
- pinctrl-names = "default";
---- a/arch/arm/boot/dts/mt7623.dtsi
-+++ b/arch/arm/boot/dts/mt7623.dtsi
-@@ -326,6 +326,7 @@
- "syscon";
- reg = <0 0x10209000 0 0x1000>;
- #clock-cells = <1>;
-+ #reset-cells = <1>;
- };
-
- rng: rng@1020f000 {
diff --git a/target/linux/mediatek/patches-4.14/0101-reset-mediatek-add-reset-controller-dt-bindings-requ.patch b/target/linux/mediatek/patches-4.14/0101-reset-mediatek-add-reset-controller-dt-bindings-requ.patch
deleted file mode 100644
index 123af60118..0000000000
--- a/target/linux/mediatek/patches-4.14/0101-reset-mediatek-add-reset-controller-dt-bindings-requ.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 5d6a82632eb7258c8ca49cc96c18b8b4071b6639 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 20 Sep 2017 17:40:16 +0800
-Subject: [PATCH 101/224] reset: mediatek: add reset controller dt-bindings
- required header for MT7622 SoC
-
-Add the reset controller dt-bindings exported from infracfg, pericfg,
-hifsys and ethsys which could be found on MT7622 SoC. So that we can
-reference them from within a device-tree file.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- include/dt-bindings/reset/mt7622-reset.h | 94 ++++++++++++++++++++++++++++++++
- 1 file changed, 94 insertions(+)
- create mode 100644 include/dt-bindings/reset/mt7622-reset.h
-
---- /dev/null
-+++ b/include/dt-bindings/reset/mt7622-reset.h
-@@ -0,0 +1,94 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7622
-+#define _DT_BINDINGS_RESET_CONTROLLER_MT7622
-+
-+/* INFRACFG resets */
-+#define MT7622_INFRA_EMI_REG_RST 0
-+#define MT7622_INFRA_DRAMC0_A0_RST 1
-+#define MT7622_INFRA_APCIRQ_EINT_RST 3
-+#define MT7622_INFRA_APXGPT_RST 4
-+#define MT7622_INFRA_SCPSYS_RST 5
-+#define MT7622_INFRA_PMIC_WRAP_RST 7
-+#define MT7622_INFRA_IRRX_RST 9
-+#define MT7622_INFRA_EMI_RST 16
-+#define MT7622_INFRA_WED0_RST 17
-+#define MT7622_INFRA_DRAMC_RST 18
-+#define MT7622_INFRA_CCI_INTF_RST 19
-+#define MT7622_INFRA_TRNG_RST 21
-+#define MT7622_INFRA_SYSIRQ_RST 22
-+#define MT7622_INFRA_WED1_RST 25
-+
-+/* PERICFG Subsystem resets */
-+#define MT7622_PERI_UART0_SW_RST 0
-+#define MT7622_PERI_UART1_SW_RST 1
-+#define MT7622_PERI_UART2_SW_RST 2
-+#define MT7622_PERI_UART3_SW_RST 3
-+#define MT7622_PERI_UART4_SW_RST 4
-+#define MT7622_PERI_BTIF_SW_RST 6
-+#define MT7622_PERI_PWM_SW_RST 8
-+#define MT7622_PERI_AUXADC_SW_RST 10
-+#define MT7622_PERI_DMA_SW_RST 11
-+#define MT7622_PERI_IRTX_SW_RST 13
-+#define MT7622_PERI_NFI_SW_RST 14
-+#define MT7622_PERI_THERM_SW_RST 16
-+#define MT7622_PERI_MSDC0_SW_RST 19
-+#define MT7622_PERI_MSDC1_SW_RST 20
-+#define MT7622_PERI_I2C0_SW_RST 22
-+#define MT7622_PERI_I2C1_SW_RST 23
-+#define MT7622_PERI_I2C2_SW_RST 24
-+#define MT7622_PERI_SPI0_SW_RST 33
-+#define MT7622_PERI_SPI1_SW_RST 34
-+#define MT7622_PERI_FLASHIF_SW_RST 36
-+
-+/* TOPRGU resets */
-+#define MT7622_TOPRGU_INFRA_RST 0
-+#define MT7622_TOPRGU_ETHDMA_RST 1
-+#define MT7622_TOPRGU_DDRPHY_RST 6
-+#define MT7622_TOPRGU_INFRA_AO_RST 8
-+#define MT7622_TOPRGU_CONN_RST 9
-+#define MT7622_TOPRGU_APMIXED_RST 10
-+#define MT7622_TOPRGU_CONN_MCU_RST 12
-+
-+/* PCIe/SATA Subsystem resets */
-+#define MT7622_SATA_PHY_REG_RST 12
-+#define MT7622_SATA_PHY_SW_RST 13
-+#define MT7622_SATA_AXI_BUS_RST 15
-+#define MT7622_PCIE1_CORE_RST 19
-+#define MT7622_PCIE1_MMIO_RST 20
-+#define MT7622_PCIE1_HRST 21
-+#define MT7622_PCIE1_USER_RST 22
-+#define MT7622_PCIE1_PIPE_RST 23
-+#define MT7622_PCIE0_CORE_RST 27
-+#define MT7622_PCIE0_MMIO_RST 28
-+#define MT7622_PCIE0_HRST 29
-+#define MT7622_PCIE0_USER_RST 30
-+#define MT7622_PCIE0_PIPE_RST 31
-+
-+/* SSUSB Subsystem resets */
-+#define MT7622_SSUSB_PHY_PWR_RST 3
-+#define MT7622_SSUSB_MAC_PWR_RST 4
-+
-+/* ETHSYS Subsystem resets */
-+#define MT7622_ETHSYS_SYS_RST 0
-+#define MT7622_ETHSYS_MCM_RST 2
-+#define MT7622_ETHSYS_HSDMA_RST 5
-+#define MT7622_ETHSYS_FE_RST 6
-+#define MT7622_ETHSYS_GMAC_RST 23
-+#define MT7622_ETHSYS_EPHY_RST 24
-+#define MT7622_ETHSYS_CRYPTO_RST 29
-+#define MT7622_ETHSYS_PPE_RST 31
-+
-+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7622 */
diff --git a/target/linux/mediatek/patches-4.14/0102-soc-mediatek-pwrap-fixup-warnings-from-coding-style.patch b/target/linux/mediatek/patches-4.14/0102-soc-mediatek-pwrap-fixup-warnings-from-coding-style.patch
deleted file mode 100644
index a66fa34934..0000000000
--- a/target/linux/mediatek/patches-4.14/0102-soc-mediatek-pwrap-fixup-warnings-from-coding-style.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From c7cb4b7e750fc9a23cd80ef34ad4ef8a47f895d5 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 21 Sep 2017 16:26:57 +0800
-Subject: [PATCH 102/224] soc: mediatek: pwrap: fixup warnings from coding
- style
-
-fixup those warnings such as lines over 80 words and parenthesis
-alignment which would be complained by checkpatch.pl.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 20 +++++++++++++-------
- 1 file changed, 13 insertions(+), 7 deletions(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -827,7 +827,8 @@ static int pwrap_init_cipher(struct pmic
- /* wait for cipher data ready@PMIC */
- ret = pwrap_wait_for_state(wrp, pwrap_is_pmic_cipher_ready);
- if (ret) {
-- dev_err(wrp->dev, "timeout waiting for cipher data ready@PMIC\n");
-+ dev_err(wrp->dev,
-+ "timeout waiting for cipher data ready@PMIC\n");
- return ret;
- }
-
-@@ -1159,23 +1160,27 @@ static int pwrap_probe(struct platform_d
- if (IS_ERR(wrp->bridge_base))
- return PTR_ERR(wrp->bridge_base);
-
-- wrp->rstc_bridge = devm_reset_control_get(wrp->dev, "pwrap-bridge");
-+ wrp->rstc_bridge = devm_reset_control_get(wrp->dev,
-+ "pwrap-bridge");
- if (IS_ERR(wrp->rstc_bridge)) {
- ret = PTR_ERR(wrp->rstc_bridge);
-- dev_dbg(wrp->dev, "cannot get pwrap-bridge reset: %d\n", ret);
-+ dev_dbg(wrp->dev,
-+ "cannot get pwrap-bridge reset: %d\n", ret);
- return ret;
- }
- }
-
- wrp->clk_spi = devm_clk_get(wrp->dev, "spi");
- if (IS_ERR(wrp->clk_spi)) {
-- dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_spi));
-+ dev_dbg(wrp->dev, "failed to get clock: %ld\n",
-+ PTR_ERR(wrp->clk_spi));
- return PTR_ERR(wrp->clk_spi);
- }
-
- wrp->clk_wrap = devm_clk_get(wrp->dev, "wrap");
- if (IS_ERR(wrp->clk_wrap)) {
-- dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_wrap));
-+ dev_dbg(wrp->dev, "failed to get clock: %ld\n",
-+ PTR_ERR(wrp->clk_wrap));
- return PTR_ERR(wrp->clk_wrap);
- }
-
-@@ -1220,8 +1225,9 @@ static int pwrap_probe(struct platform_d
- pwrap_writel(wrp, wrp->master->int_en_all, PWRAP_INT_EN);
-
- irq = platform_get_irq(pdev, 0);
-- ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH,
-- "mt-pmic-pwrap", wrp);
-+ ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt,
-+ IRQF_TRIGGER_HIGH,
-+ "mt-pmic-pwrap", wrp);
- if (ret)
- goto err_out2;
-
diff --git a/target/linux/mediatek/patches-4.14/0104-usb-mtu3-support-option-to-disable-usb3-ports.patch b/target/linux/mediatek/patches-4.14/0104-usb-mtu3-support-option-to-disable-usb3-ports.patch
deleted file mode 100644
index 4b72094fc7..0000000000
--- a/target/linux/mediatek/patches-4.14/0104-usb-mtu3-support-option-to-disable-usb3-ports.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 7a46c3488c48a0fbe313ed25c12af3fb3af48a01 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:38 +0800
-Subject: [PATCH 104/224] usb: mtu3: support option to disable usb3 ports
-
-Add support to disable specific usb3 ports, it's useful when
-usb3 phy is shared with PCIe or SATA, because we should disable
-the corresponding usb3 port if the phy is used by PCIe or SATA.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 3 +++
- drivers/usb/mtu3/mtu3_host.c | 16 +++++++++++++---
- drivers/usb/mtu3/mtu3_plat.c | 8 ++++++--
- 3 files changed, 22 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -210,6 +210,8 @@ struct otg_switch_mtk {
- * host only, device only or dual-role mode
- * @u2_ports: number of usb2.0 host ports
- * @u3_ports: number of usb3.0 host ports
-+ * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
-+ * disable u3port0, bit1==1 to disable u3port1,... etc
- * @dbgfs_root: only used when supports manual dual-role switch via debugfs
- * @wakeup_en: it's true when supports remote wakeup in host mode
- * @wk_deb_p0: port0's wakeup debounce clock
-@@ -232,6 +234,7 @@ struct ssusb_mtk {
- bool is_host;
- int u2_ports;
- int u3_ports;
-+ int u3p_dis_msk;
- struct dentry *dbgfs_root;
- /* usb wakeup for host mode */
- bool wakeup_en;
---- a/drivers/usb/mtu3/mtu3_host.c
-+++ b/drivers/usb/mtu3/mtu3_host.c
-@@ -151,6 +151,7 @@ int ssusb_host_enable(struct ssusb_mtk *
- void __iomem *ibase = ssusb->ippc_base;
- int num_u3p = ssusb->u3_ports;
- int num_u2p = ssusb->u2_ports;
-+ int u3_ports_disabed;
- u32 check_clk;
- u32 value;
- int i;
-@@ -158,8 +159,14 @@ int ssusb_host_enable(struct ssusb_mtk *
- /* power on host ip */
- mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
-
-- /* power on and enable all u3 ports */
-+ /* power on and enable u3 ports except skipped ones */
-+ u3_ports_disabed = 0;
- for (i = 0; i < num_u3p; i++) {
-+ if ((0x1 << i) & ssusb->u3p_dis_msk) {
-+ u3_ports_disabed++;
-+ continue;
-+ }
-+
- value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
- value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
- value |= SSUSB_U3_PORT_HOST_SEL;
-@@ -175,7 +182,7 @@ int ssusb_host_enable(struct ssusb_mtk *
- }
-
- check_clk = SSUSB_XHCI_RST_B_STS;
-- if (num_u3p)
-+ if (num_u3p > u3_ports_disabed)
- check_clk = SSUSB_U3_MAC_RST_B_STS;
-
- return ssusb_check_clocks(ssusb, check_clk);
-@@ -190,8 +197,11 @@ int ssusb_host_disable(struct ssusb_mtk
- int ret;
- int i;
-
-- /* power down and disable all u3 ports */
-+ /* power down and disable u3 ports except skipped ones */
- for (i = 0; i < num_u3p; i++) {
-+ if ((0x1 << i) & ssusb->u3p_dis_msk)
-+ continue;
-+
- value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
- value |= SSUSB_U3_PORT_PDN;
- value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -276,6 +276,10 @@ static int get_ssusb_rscs(struct platfor
- if (ret)
- return ret;
-
-+ /* optional property, ignore the error if it does not exist */
-+ of_property_read_u32(node, "mediatek,u3p-dis-msk",
-+ &ssusb->u3p_dis_msk);
-+
- if (ssusb->dr_mode != USB_DR_MODE_OTG)
- return 0;
-
-@@ -304,8 +308,8 @@ static int get_ssusb_rscs(struct platfor
- }
- }
-
-- dev_info(dev, "dr_mode: %d, is_u3_dr: %d\n",
-- ssusb->dr_mode, otg_sx->is_u3_drd);
-+ dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk:%x\n",
-+ ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk);
-
- return 0;
- }
diff --git a/target/linux/mediatek/patches-4.14/0105-usb-mtu3-remove-dummy-wakeup-debounce-clocks.patch b/target/linux/mediatek/patches-4.14/0105-usb-mtu3-remove-dummy-wakeup-debounce-clocks.patch
deleted file mode 100644
index aaefc0e6eb..0000000000
--- a/target/linux/mediatek/patches-4.14/0105-usb-mtu3-remove-dummy-wakeup-debounce-clocks.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 50005796f146351dc9c34bbf8898b305c562e964 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:39 +0800
-Subject: [PATCH 105/224] usb: mtu3: remove dummy wakeup debounce clocks
-
-The wakeup debounce clocks for each ports in fact are not
-needed, so remove them.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 4 ----
- drivers/usb/mtu3/mtu3_host.c | 57 ++++----------------------------------------
- 2 files changed, 4 insertions(+), 57 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -214,8 +214,6 @@ struct otg_switch_mtk {
- * disable u3port0, bit1==1 to disable u3port1,... etc
- * @dbgfs_root: only used when supports manual dual-role switch via debugfs
- * @wakeup_en: it's true when supports remote wakeup in host mode
-- * @wk_deb_p0: port0's wakeup debounce clock
-- * @wk_deb_p1: it's optional, and depends on port1 is supported or not
- */
- struct ssusb_mtk {
- struct device *dev;
-@@ -238,8 +236,6 @@ struct ssusb_mtk {
- struct dentry *dbgfs_root;
- /* usb wakeup for host mode */
- bool wakeup_en;
-- struct clk *wk_deb_p0;
-- struct clk *wk_deb_p1;
- struct regmap *pericfg;
- };
-
---- a/drivers/usb/mtu3/mtu3_host.c
-+++ b/drivers/usb/mtu3/mtu3_host.c
-@@ -79,20 +79,6 @@ int ssusb_wakeup_of_property_parse(struc
- if (!ssusb->wakeup_en)
- return 0;
-
-- ssusb->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
-- if (IS_ERR(ssusb->wk_deb_p0)) {
-- dev_err(dev, "fail to get wakeup_deb_p0\n");
-- return PTR_ERR(ssusb->wk_deb_p0);
-- }
--
-- if (of_property_read_bool(dn, "wakeup_deb_p1")) {
-- ssusb->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
-- if (IS_ERR(ssusb->wk_deb_p1)) {
-- dev_err(dev, "fail to get wakeup_deb_p1\n");
-- return PTR_ERR(ssusb->wk_deb_p1);
-- }
-- }
--
- ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
- "mediatek,syscon-wakeup");
- if (IS_ERR(ssusb->pericfg)) {
-@@ -103,36 +89,6 @@ int ssusb_wakeup_of_property_parse(struc
- return 0;
- }
-
--static int ssusb_wakeup_clks_enable(struct ssusb_mtk *ssusb)
--{
-- int ret;
--
-- ret = clk_prepare_enable(ssusb->wk_deb_p0);
-- if (ret) {
-- dev_err(ssusb->dev, "failed to enable wk_deb_p0\n");
-- goto usb_p0_err;
-- }
--
-- ret = clk_prepare_enable(ssusb->wk_deb_p1);
-- if (ret) {
-- dev_err(ssusb->dev, "failed to enable wk_deb_p1\n");
-- goto usb_p1_err;
-- }
--
-- return 0;
--
--usb_p1_err:
-- clk_disable_unprepare(ssusb->wk_deb_p0);
--usb_p0_err:
-- return -EINVAL;
--}
--
--static void ssusb_wakeup_clks_disable(struct ssusb_mtk *ssusb)
--{
-- clk_disable_unprepare(ssusb->wk_deb_p1);
-- clk_disable_unprepare(ssusb->wk_deb_p0);
--}
--
- static void host_ports_num_get(struct ssusb_mtk *ssusb)
- {
- u32 xhci_cap;
-@@ -286,19 +242,14 @@ void ssusb_host_exit(struct ssusb_mtk *s
-
- int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
- {
-- int ret = 0;
--
-- if (ssusb->wakeup_en) {
-- ret = ssusb_wakeup_clks_enable(ssusb);
-+ if (ssusb->wakeup_en)
- ssusb_wakeup_ip_sleep_en(ssusb);
-- }
-- return ret;
-+
-+ return 0;
- }
-
- void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
- {
-- if (ssusb->wakeup_en) {
-+ if (ssusb->wakeup_en)
- ssusb_wakeup_ip_sleep_dis(ssusb);
-- ssusb_wakeup_clks_disable(ssusb);
-- }
- }
diff --git a/target/linux/mediatek/patches-4.14/0106-usb-mtu3-add-optional-mcu-and-dma-bus-clocks.patch b/target/linux/mediatek/patches-4.14/0106-usb-mtu3-add-optional-mcu-and-dma-bus-clocks.patch
deleted file mode 100644
index 9b68caa367..0000000000
--- a/target/linux/mediatek/patches-4.14/0106-usb-mtu3-add-optional-mcu-and-dma-bus-clocks.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From 677805f6d83524717b46b3cde74aa455dbf6299f Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:40 +0800
-Subject: [PATCH 106/224] usb: mtu3: add optional mcu and dma bus clocks
-
-There are mcu_bus and dma_bus clocks needed to be turned on/off by
-driver on some SoCs, so add them as optional ones
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 5 ++
- drivers/usb/mtu3/mtu3_plat.c | 121 +++++++++++++++++++++++++++++--------------
- 2 files changed, 86 insertions(+), 40 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -206,6 +206,9 @@ struct otg_switch_mtk {
- * @ippc_base: register base address of IP Power and Clock interface (IPPC)
- * @vusb33: usb3.3V shared by device/host IP
- * @sys_clk: system clock of mtu3, shared by device/host IP
-+ * @ref_clk: reference clock
-+ * @mcu_clk: mcu_bus_ck clock for AHB bus etc
-+ * @dma_clk: dma_bus_ck clock for AXI bus etc
- * @dr_mode: works in which mode:
- * host only, device only or dual-role mode
- * @u2_ports: number of usb2.0 host ports
-@@ -226,6 +229,8 @@ struct ssusb_mtk {
- struct regulator *vusb33;
- struct clk *sys_clk;
- struct clk *ref_clk;
-+ struct clk *mcu_clk;
-+ struct clk *dma_clk;
- /* otg */
- struct otg_switch_mtk otg_switch;
- enum usb_dr_mode dr_mode;
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -110,15 +110,9 @@ static void ssusb_phy_power_off(struct s
- phy_power_off(ssusb->phys[i]);
- }
-
--static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
-+static int ssusb_clks_enable(struct ssusb_mtk *ssusb)
- {
-- int ret = 0;
--
-- ret = regulator_enable(ssusb->vusb33);
-- if (ret) {
-- dev_err(ssusb->dev, "failed to enable vusb33\n");
-- goto vusb33_err;
-- }
-+ int ret;
-
- ret = clk_prepare_enable(ssusb->sys_clk);
- if (ret) {
-@@ -132,6 +126,52 @@ static int ssusb_rscs_init(struct ssusb_
- goto ref_clk_err;
- }
-
-+ ret = clk_prepare_enable(ssusb->mcu_clk);
-+ if (ret) {
-+ dev_err(ssusb->dev, "failed to enable mcu_clk\n");
-+ goto mcu_clk_err;
-+ }
-+
-+ ret = clk_prepare_enable(ssusb->dma_clk);
-+ if (ret) {
-+ dev_err(ssusb->dev, "failed to enable dma_clk\n");
-+ goto dma_clk_err;
-+ }
-+
-+ return 0;
-+
-+dma_clk_err:
-+ clk_disable_unprepare(ssusb->mcu_clk);
-+mcu_clk_err:
-+ clk_disable_unprepare(ssusb->ref_clk);
-+ref_clk_err:
-+ clk_disable_unprepare(ssusb->sys_clk);
-+sys_clk_err:
-+ return ret;
-+}
-+
-+static void ssusb_clks_disable(struct ssusb_mtk *ssusb)
-+{
-+ clk_disable_unprepare(ssusb->dma_clk);
-+ clk_disable_unprepare(ssusb->mcu_clk);
-+ clk_disable_unprepare(ssusb->ref_clk);
-+ clk_disable_unprepare(ssusb->sys_clk);
-+}
-+
-+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
-+{
-+ int ret = 0;
-+
-+ ret = regulator_enable(ssusb->vusb33);
-+ if (ret) {
-+ dev_err(ssusb->dev, "failed to enable vusb33\n");
-+ goto vusb33_err;
-+ }
-+
-+ ret = ssusb_clks_enable(ssusb);
-+ if (ret)
-+ goto clks_err;
-+
- ret = ssusb_phy_init(ssusb);
- if (ret) {
- dev_err(ssusb->dev, "failed to init phy\n");
-@@ -149,20 +189,16 @@ static int ssusb_rscs_init(struct ssusb_
- phy_err:
- ssusb_phy_exit(ssusb);
- phy_init_err:
-- clk_disable_unprepare(ssusb->ref_clk);
--ref_clk_err:
-- clk_disable_unprepare(ssusb->sys_clk);
--sys_clk_err:
-+ ssusb_clks_disable(ssusb);
-+clks_err:
- regulator_disable(ssusb->vusb33);
- vusb33_err:
--
- return ret;
- }
-
- static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
- {
-- clk_disable_unprepare(ssusb->sys_clk);
-- clk_disable_unprepare(ssusb->ref_clk);
-+ ssusb_clks_disable(ssusb);
- regulator_disable(ssusb->vusb33);
- ssusb_phy_power_off(ssusb);
- ssusb_phy_exit(ssusb);
-@@ -203,6 +239,19 @@ static int get_iddig_pinctrl(struct ssus
- return 0;
- }
-
-+/* ignore the error if the clock does not exist */
-+static struct clk *get_optional_clk(struct device *dev, const char *id)
-+{
-+ struct clk *opt_clk;
-+
-+ opt_clk = devm_clk_get(dev, id);
-+ /* ignore error number except EPROBE_DEFER */
-+ if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
-+ opt_clk = NULL;
-+
-+ return opt_clk;
-+}
-+
- static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
- {
- struct device_node *node = pdev->dev.of_node;
-@@ -225,18 +274,17 @@ static int get_ssusb_rscs(struct platfor
- return PTR_ERR(ssusb->sys_clk);
- }
-
-- /*
-- * reference clock is usually a "fixed-clock", make it optional
-- * for backward compatibility and ignore the error if it does
-- * not exist.
-- */
-- ssusb->ref_clk = devm_clk_get(dev, "ref_ck");
-- if (IS_ERR(ssusb->ref_clk)) {
-- if (PTR_ERR(ssusb->ref_clk) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- ssusb->ref_clk = NULL;
-- }
-+ ssusb->ref_clk = get_optional_clk(dev, "ref_ck");
-+ if (IS_ERR(ssusb->ref_clk))
-+ return PTR_ERR(ssusb->ref_clk);
-+
-+ ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck");
-+ if (IS_ERR(ssusb->mcu_clk))
-+ return PTR_ERR(ssusb->mcu_clk);
-+
-+ ssusb->dma_clk = get_optional_clk(dev, "dma_ck");
-+ if (IS_ERR(ssusb->dma_clk))
-+ return PTR_ERR(ssusb->dma_clk);
-
- ssusb->num_phys = of_count_phandle_with_args(node,
- "phys", "#phy-cells");
-@@ -451,8 +499,7 @@ static int __maybe_unused mtu3_suspend(s
-
- ssusb_host_disable(ssusb, true);
- ssusb_phy_power_off(ssusb);
-- clk_disable_unprepare(ssusb->sys_clk);
-- clk_disable_unprepare(ssusb->ref_clk);
-+ ssusb_clks_disable(ssusb);
- ssusb_wakeup_enable(ssusb);
-
- return 0;
-@@ -470,27 +517,21 @@ static int __maybe_unused mtu3_resume(st
- return 0;
-
- ssusb_wakeup_disable(ssusb);
-- ret = clk_prepare_enable(ssusb->sys_clk);
-- if (ret)
-- goto err_sys_clk;
--
-- ret = clk_prepare_enable(ssusb->ref_clk);
-+ ret = ssusb_clks_enable(ssusb);
- if (ret)
-- goto err_ref_clk;
-+ goto clks_err;
-
- ret = ssusb_phy_power_on(ssusb);
- if (ret)
-- goto err_power_on;
-+ goto phy_err;
-
- ssusb_host_enable(ssusb);
-
- return 0;
-
--err_power_on:
-- clk_disable_unprepare(ssusb->ref_clk);
--err_ref_clk:
-- clk_disable_unprepare(ssusb->sys_clk);
--err_sys_clk:
-+phy_err:
-+ ssusb_clks_disable(ssusb);
-+clks_err:
- return ret;
- }
-
diff --git a/target/linux/mediatek/patches-4.14/0107-usb-mtu3-support-36-bit-DMA-address.patch b/target/linux/mediatek/patches-4.14/0107-usb-mtu3-support-36-bit-DMA-address.patch
deleted file mode 100644
index 88f52e6f20..0000000000
--- a/target/linux/mediatek/patches-4.14/0107-usb-mtu3-support-36-bit-DMA-address.patch
+++ /dev/null
@@ -1,362 +0,0 @@
-From d366bf086a61b7a895d8819a3c1349b9c6b8e40f Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:41 +0800
-Subject: [PATCH 107/224] usb: mtu3: support 36-bit DMA address
-
-add support for 36-bit DMA address
-
-[ Felipe Balbi: fix printk format for dma_addr_t ]
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 17 ++++++-
- drivers/usb/mtu3/mtu3_core.c | 34 +++++++++++++-
- drivers/usb/mtu3/mtu3_hw_regs.h | 10 ++++
- drivers/usb/mtu3/mtu3_qmu.c | 102 +++++++++++++++++++++++++++++++++-------
- 4 files changed, 142 insertions(+), 21 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -46,6 +46,9 @@ struct mtu3_request;
- #define MU3D_EP_RXCR1(epnum) (U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
- #define MU3D_EP_RXCR2(epnum) (U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
-
-+#define USB_QMU_TQHIAR(epnum) (U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
-+#define USB_QMU_RQHIAR(epnum) (U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
-+
- #define USB_QMU_RQCSR(epnum) (U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
- #define USB_QMU_RQSAR(epnum) (U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
- #define USB_QMU_RQCPR(epnum) (U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
-@@ -138,23 +141,33 @@ struct mtu3_fifo_info {
- * Checksum value is calculated over the 16 bytes of the GPD by default;
- * @data_buf_len (RX ONLY): This value indicates the length of
- * the assigned data buffer
-+ * @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer,
-+ * [7:4] are 4 extension bits of @next_gpd
- * @next_gpd: Physical address of the next GPD
- * @buffer: Physical address of the data buffer
- * @buf_len:
- * (TX): This value indicates the length of the assigned data buffer
- * (RX): The total length of data received
- * @ext_len: reserved
-+ * @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer,
-+ * [7:4] are 4 extension bits of @next_gpd
- * @ext_flag:
- * bit5 (TX ONLY): Zero Length Packet (ZLP),
- */
- struct qmu_gpd {
- __u8 flag;
- __u8 chksum;
-- __le16 data_buf_len;
-+ union {
-+ __le16 data_buf_len;
-+ __le16 tx_ext_addr;
-+ };
- __le32 next_gpd;
- __le32 buffer;
- __le16 buf_len;
-- __u8 ext_len;
-+ union {
-+ __u8 ext_len;
-+ __u8 rx_ext_addr;
-+ };
- __u8 ext_flag;
- } __packed;
-
---- a/drivers/usb/mtu3/mtu3_core.c
-+++ b/drivers/usb/mtu3/mtu3_core.c
-@@ -17,6 +17,7 @@
- *
- */
-
-+#include <linux/dma-mapping.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/of_address.h>
-@@ -761,7 +762,31 @@ static void mtu3_hw_exit(struct mtu3 *mt
- mtu3_mem_free(mtu);
- }
-
--/*-------------------------------------------------------------------------*/
-+/**
-+ * we set 32-bit DMA mask by default, here check whether the controller
-+ * supports 36-bit DMA or not, if it does, set 36-bit DMA mask.
-+ */
-+static int mtu3_set_dma_mask(struct mtu3 *mtu)
-+{
-+ struct device *dev = mtu->dev;
-+ bool is_36bit = false;
-+ int ret = 0;
-+ u32 value;
-+
-+ value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL);
-+ if (value & DMA_ADDR_36BIT) {
-+ is_36bit = true;
-+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
-+ /* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */
-+ if (ret) {
-+ is_36bit = false;
-+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-+ }
-+ }
-+ dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32");
-+
-+ return ret;
-+}
-
- int ssusb_gadget_init(struct ssusb_mtk *ssusb)
- {
-@@ -822,6 +847,12 @@ int ssusb_gadget_init(struct ssusb_mtk *
- return ret;
- }
-
-+ ret = mtu3_set_dma_mask(mtu);
-+ if (ret) {
-+ dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret);
-+ goto dma_mask_err;
-+ }
-+
- ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
- if (ret) {
- dev_err(dev, "request irq %d failed!\n", mtu->irq);
-@@ -847,6 +878,7 @@ int ssusb_gadget_init(struct ssusb_mtk *
- gadget_err:
- device_init_wakeup(dev, false);
-
-+dma_mask_err:
- irq_err:
- mtu3_hw_exit(mtu);
- ssusb->u3d = NULL;
---- a/drivers/usb/mtu3/mtu3_hw_regs.h
-+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
-@@ -58,6 +58,8 @@
- #define U3D_QCR1 (SSUSB_DEV_BASE + 0x0404)
- #define U3D_QCR2 (SSUSB_DEV_BASE + 0x0408)
- #define U3D_QCR3 (SSUSB_DEV_BASE + 0x040C)
-+#define U3D_TXQHIAR1 (SSUSB_DEV_BASE + 0x0484)
-+#define U3D_RXQHIAR1 (SSUSB_DEV_BASE + 0x04C4)
-
- #define U3D_TXQCSR1 (SSUSB_DEV_BASE + 0x0510)
- #define U3D_TXQSAR1 (SSUSB_DEV_BASE + 0x0514)
-@@ -189,6 +191,13 @@
- #define QMU_RX_COZ(x) (BIT(16) << (x))
- #define QMU_RX_ZLP(x) (BIT(0) << (x))
-
-+/* U3D_TXQHIAR1 */
-+/* U3D_RXQHIAR1 */
-+#define QMU_LAST_DONE_PTR_HI(x) (((x) >> 16) & 0xf)
-+#define QMU_CUR_GPD_ADDR_HI(x) (((x) >> 8) & 0xf)
-+#define QMU_START_ADDR_HI_MSK GENMASK(3, 0)
-+#define QMU_START_ADDR_HI(x) (((x) & 0xf) << 0)
-+
- /* U3D_TXQCSR1 */
- /* U3D_RXQCSR1 */
- #define QMU_Q_ACTIVE BIT(15)
-@@ -225,6 +234,7 @@
- #define CAP_TX_EP_NUM(x) ((x) & 0x1f)
-
- /* U3D_MISC_CTRL */
-+#define DMA_ADDR_36BIT BIT(31)
- #define VBUS_ON BIT(1)
- #define VBUS_FRC_EN BIT(0)
-
---- a/drivers/usb/mtu3/mtu3_qmu.c
-+++ b/drivers/usb/mtu3/mtu3_qmu.c
-@@ -40,7 +40,58 @@
- #define GPD_FLAGS_IOC BIT(7)
-
- #define GPD_EXT_FLAG_ZLP BIT(5)
-+#define GPD_EXT_NGP(x) (((x) & 0xf) << 4)
-+#define GPD_EXT_BUF(x) (((x) & 0xf) << 0)
-
-+#define HILO_GEN64(hi, lo) (((u64)(hi) << 32) + (lo))
-+#define HILO_DMA(hi, lo) \
-+ ((dma_addr_t)HILO_GEN64((le32_to_cpu(hi)), (le32_to_cpu(lo))))
-+
-+static dma_addr_t read_txq_cur_addr(void __iomem *mbase, u8 epnum)
-+{
-+ u32 txcpr;
-+ u32 txhiar;
-+
-+ txcpr = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
-+ txhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
-+
-+ return HILO_DMA(QMU_CUR_GPD_ADDR_HI(txhiar), txcpr);
-+}
-+
-+static dma_addr_t read_rxq_cur_addr(void __iomem *mbase, u8 epnum)
-+{
-+ u32 rxcpr;
-+ u32 rxhiar;
-+
-+ rxcpr = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
-+ rxhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
-+
-+ return HILO_DMA(QMU_CUR_GPD_ADDR_HI(rxhiar), rxcpr);
-+}
-+
-+static void write_txq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
-+{
-+ u32 tqhiar;
-+
-+ mtu3_writel(mbase, USB_QMU_TQSAR(epnum),
-+ cpu_to_le32(lower_32_bits(dma)));
-+ tqhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
-+ tqhiar &= ~QMU_START_ADDR_HI_MSK;
-+ tqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
-+ mtu3_writel(mbase, USB_QMU_TQHIAR(epnum), tqhiar);
-+}
-+
-+static void write_rxq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
-+{
-+ u32 rqhiar;
-+
-+ mtu3_writel(mbase, USB_QMU_RQSAR(epnum),
-+ cpu_to_le32(lower_32_bits(dma)));
-+ rqhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
-+ rqhiar &= ~QMU_START_ADDR_HI_MSK;
-+ rqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
-+ mtu3_writel(mbase, USB_QMU_RQHIAR(epnum), rqhiar);
-+}
-
- static struct qmu_gpd *gpd_dma_to_virt(struct mtu3_gpd_ring *ring,
- dma_addr_t dma_addr)
-@@ -193,21 +244,27 @@ static int mtu3_prepare_tx_gpd(struct mt
- struct mtu3_gpd_ring *ring = &mep->gpd_ring;
- struct qmu_gpd *gpd = ring->enqueue;
- struct usb_request *req = &mreq->request;
-+ dma_addr_t enq_dma;
-+ u16 ext_addr;
-
- /* set all fields to zero as default value */
- memset(gpd, 0, sizeof(*gpd));
-
-- gpd->buffer = cpu_to_le32((u32)req->dma);
-+ gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
-+ ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
- gpd->buf_len = cpu_to_le16(req->length);
- gpd->flag |= GPD_FLAGS_IOC;
-
- /* get the next GPD */
- enq = advance_enq_gpd(ring);
-- dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p\n",
-- mep->epnum, gpd, enq);
-+ enq_dma = gpd_virt_to_dma(ring, enq);
-+ dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
-+ mep->epnum, gpd, enq, enq_dma);
-
- enq->flag &= ~GPD_FLAGS_HWO;
-- gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
-+ gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
-+ ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
-+ gpd->tx_ext_addr = cpu_to_le16(ext_addr);
-
- if (req->zero)
- gpd->ext_flag |= GPD_EXT_FLAG_ZLP;
-@@ -226,21 +283,27 @@ static int mtu3_prepare_rx_gpd(struct mt
- struct mtu3_gpd_ring *ring = &mep->gpd_ring;
- struct qmu_gpd *gpd = ring->enqueue;
- struct usb_request *req = &mreq->request;
-+ dma_addr_t enq_dma;
-+ u16 ext_addr;
-
- /* set all fields to zero as default value */
- memset(gpd, 0, sizeof(*gpd));
-
-- gpd->buffer = cpu_to_le32((u32)req->dma);
-+ gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
-+ ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
- gpd->data_buf_len = cpu_to_le16(req->length);
- gpd->flag |= GPD_FLAGS_IOC;
-
- /* get the next GPD */
- enq = advance_enq_gpd(ring);
-- dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p\n",
-- mep->epnum, gpd, enq);
-+ enq_dma = gpd_virt_to_dma(ring, enq);
-+ dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
-+ mep->epnum, gpd, enq, enq_dma);
-
- enq->flag &= ~GPD_FLAGS_HWO;
-- gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
-+ gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
-+ ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
-+ gpd->rx_ext_addr = cpu_to_le16(ext_addr);
- gpd->chksum = qmu_calc_checksum((u8 *)gpd);
- gpd->flag |= GPD_FLAGS_HWO;
-
-@@ -267,8 +330,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
-
- if (mep->is_in) {
- /* set QMU start address */
-- mtu3_writel(mbase, USB_QMU_TQSAR(mep->epnum), ring->dma);
-- mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
-+ write_txq_start_addr(mbase, epnum, ring->dma);
-+ mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN);
- mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum));
- /* send zero length packet according to ZLP flag in GPD */
- mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum));
-@@ -282,8 +345,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
- mtu3_writel(mbase, USB_QMU_TQCSR(epnum), QMU_Q_START);
-
- } else {
-- mtu3_writel(mbase, USB_QMU_RQSAR(mep->epnum), ring->dma);
-- mtu3_setbits(mbase, MU3D_EP_RXCR0(mep->epnum), RX_DMAREQEN);
-+ write_rxq_start_addr(mbase, epnum, ring->dma);
-+ mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN);
- mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum));
- /* don't expect ZLP */
- mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum));
-@@ -353,9 +416,9 @@ static void qmu_tx_zlp_error_handler(str
- struct mtu3_gpd_ring *ring = &mep->gpd_ring;
- void __iomem *mbase = mtu->mac_base;
- struct qmu_gpd *gpd_current = NULL;
-- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
- struct usb_request *req = NULL;
- struct mtu3_request *mreq;
-+ dma_addr_t cur_gpd_dma;
- u32 txcsr = 0;
- int ret;
-
-@@ -365,7 +428,8 @@ static void qmu_tx_zlp_error_handler(str
- else
- return;
-
-- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
-+ cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
-+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
-
- if (le16_to_cpu(gpd_current->buf_len) != 0) {
- dev_err(mtu->dev, "TX EP%d buffer length error(!=0)\n", epnum);
-@@ -408,12 +472,13 @@ static void qmu_done_tx(struct mtu3 *mtu
- void __iomem *mbase = mtu->mac_base;
- struct qmu_gpd *gpd = ring->dequeue;
- struct qmu_gpd *gpd_current = NULL;
-- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
- struct usb_request *request = NULL;
- struct mtu3_request *mreq;
-+ dma_addr_t cur_gpd_dma;
-
- /*transfer phy address got from QMU register to virtual address */
-- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
-+ cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
-+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
-
- dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
- __func__, epnum, gpd, gpd_current, ring->enqueue);
-@@ -446,11 +511,12 @@ static void qmu_done_rx(struct mtu3 *mtu
- void __iomem *mbase = mtu->mac_base;
- struct qmu_gpd *gpd = ring->dequeue;
- struct qmu_gpd *gpd_current = NULL;
-- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
- struct usb_request *req = NULL;
- struct mtu3_request *mreq;
-+ dma_addr_t cur_gpd_dma;
-
-- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
-+ cur_gpd_dma = read_rxq_cur_addr(mbase, epnum);
-+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
-
- dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
- __func__, epnum, gpd, gpd_current, ring->enqueue);
diff --git a/target/linux/mediatek/patches-4.14/0108-usb-mtu3-use-FORCE-RG_IDDIG-to-implement-manual-DRD-.patch b/target/linux/mediatek/patches-4.14/0108-usb-mtu3-use-FORCE-RG_IDDIG-to-implement-manual-DRD-.patch
deleted file mode 100644
index 6ff80e446f..0000000000
--- a/target/linux/mediatek/patches-4.14/0108-usb-mtu3-use-FORCE-RG_IDDIG-to-implement-manual-DRD-.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 6c4995c9a8ba8841ba640201636954c84f494587 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:42 +0800
-Subject: [PATCH 108/224] usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD
- switch
-
-In order to keep manual DRD switch independent on IDDIG interrupt,
-make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to
-implement manual DRD switch function.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 18 ++++++++----
- drivers/usb/mtu3/mtu3_dr.c | 61 ++++++++++++++++++++++++++++++-----------
- drivers/usb/mtu3/mtu3_dr.h | 6 ++++
- drivers/usb/mtu3/mtu3_host.c | 5 ++++
- drivers/usb/mtu3/mtu3_hw_regs.h | 2 ++
- drivers/usb/mtu3/mtu3_plat.c | 38 ++-----------------------
- 6 files changed, 74 insertions(+), 56 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -115,6 +115,19 @@ enum mtu3_g_ep0_state {
- };
-
- /**
-+ * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
-+ * by IDPIN signal.
-+ * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
-+ * IDPIN signal.
-+ * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
-+ */
-+enum mtu3_dr_force_mode {
-+ MTU3_DR_FORCE_NONE = 0,
-+ MTU3_DR_FORCE_HOST,
-+ MTU3_DR_FORCE_DEVICE,
-+};
-+
-+/**
- * @base: the base address of fifo
- * @limit: the bitmap size in bits
- * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
-@@ -196,7 +209,6 @@ struct mtu3_gpd_ring {
- * xHCI driver initialization, it's necessary for system bootup
- * as device.
- * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
--* @id_*: used to maually switch between host and device modes by idpin
- * @manual_drd_enabled: it's true when supports dual-role device by debugfs
- * to switch host/device modes depending on user input.
- */
-@@ -207,10 +219,6 @@ struct otg_switch_mtk {
- struct notifier_block id_nb;
- struct delayed_work extcon_reg_dwork;
- bool is_u3_drd;
-- /* dual-role switch by debugfs */
-- struct pinctrl *id_pinctrl;
-- struct pinctrl_state *id_float;
-- struct pinctrl_state *id_ground;
- bool manual_drd_enabled;
- };
-
---- a/drivers/usb/mtu3/mtu3_dr.c
-+++ b/drivers/usb/mtu3/mtu3_dr.c
-@@ -261,21 +261,22 @@ static void extcon_register_dwork(struct
- * depending on user input.
- * This is useful in special cases, such as uses TYPE-A receptacle but also
- * wants to support dual-role mode.
-- * It generates cable state changes by pulling up/down IDPIN and
-- * notifies driver to switch mode by "extcon-usb-gpio".
-- * NOTE: when use MICRO receptacle, should not enable this interface.
- */
- static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
- {
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
-- if (to_host)
-- pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_ground);
-- else
-- pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_float);
-+ if (to_host) {
-+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
-+ ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
-+ ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
-+ } else {
-+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
-+ ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
-+ ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
-+ }
- }
-
--
- static int ssusb_mode_show(struct seq_file *sf, void *unused)
- {
- struct ssusb_mtk *ssusb = sf->private;
-@@ -388,17 +389,45 @@ static void ssusb_debugfs_exit(struct ss
- debugfs_remove_recursive(ssusb->dbgfs_root);
- }
-
-+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
-+ enum mtu3_dr_force_mode mode)
-+{
-+ u32 value;
-+
-+ value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
-+ switch (mode) {
-+ case MTU3_DR_FORCE_DEVICE:
-+ value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
-+ break;
-+ case MTU3_DR_FORCE_HOST:
-+ value |= SSUSB_U2_PORT_FORCE_IDDIG;
-+ value &= ~SSUSB_U2_PORT_RG_IDDIG;
-+ break;
-+ case MTU3_DR_FORCE_NONE:
-+ value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
-+ break;
-+ default:
-+ return;
-+ }
-+ mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
-+}
-+
- int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
- {
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
-- INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, extcon_register_dwork);
--
-- if (otg_sx->manual_drd_enabled)
-+ if (otg_sx->manual_drd_enabled) {
- ssusb_debugfs_init(ssusb);
-+ } else {
-+ INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork,
-+ extcon_register_dwork);
-
-- /* It is enough to delay 1s for waiting for host initialization */
-- schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
-+ /*
-+ * It is enough to delay 1s for waiting for
-+ * host initialization
-+ */
-+ schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
-+ }
-
- return 0;
- }
-@@ -407,8 +436,8 @@ void ssusb_otg_switch_exit(struct ssusb_
- {
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
-- cancel_delayed_work(&otg_sx->extcon_reg_dwork);
--
- if (otg_sx->manual_drd_enabled)
- ssusb_debugfs_exit(ssusb);
-+ else
-+ cancel_delayed_work(&otg_sx->extcon_reg_dwork);
- }
---- a/drivers/usb/mtu3/mtu3_dr.h
-+++ b/drivers/usb/mtu3/mtu3_dr.h
-@@ -87,6 +87,8 @@ static inline void ssusb_gadget_exit(str
- int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
- void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
- int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
-+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
-+ enum mtu3_dr_force_mode mode);
-
- #else
-
-@@ -103,6 +105,10 @@ static inline int ssusb_set_vbus(struct
- return 0;
- }
-
-+static inline void
-+ssusb_set_force_mode(struct ssusb_mtk *ssusb, enum mtu3_dr_force_mode mode)
-+{}
-+
- #endif
-
- #endif /* _MTU3_DR_H_ */
---- a/drivers/usb/mtu3/mtu3_host.c
-+++ b/drivers/usb/mtu3/mtu3_host.c
-@@ -189,6 +189,8 @@ int ssusb_host_disable(struct ssusb_mtk
-
- static void ssusb_host_setup(struct ssusb_mtk *ssusb)
- {
-+ struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-+
- host_ports_num_get(ssusb);
-
- /*
-@@ -197,6 +199,9 @@ static void ssusb_host_setup(struct ssus
- */
- ssusb_host_enable(ssusb);
-
-+ if (otg_sx->manual_drd_enabled)
-+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
-+
- /* if port0 supports dual-role, works as host mode by default */
- ssusb_set_vbus(&ssusb->otg_switch, 1);
- }
---- a/drivers/usb/mtu3/mtu3_hw_regs.h
-+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
-@@ -472,6 +472,8 @@
- #define SSUSB_U3_PORT_DIS BIT(0)
-
- /* U3D_SSUSB_U2_CTRL_0P */
-+#define SSUSB_U2_PORT_RG_IDDIG BIT(12)
-+#define SSUSB_U2_PORT_FORCE_IDDIG BIT(11)
- #define SSUSB_U2_PORT_VBUSVALID BIT(9)
- #define SSUSB_U2_PORT_OTG_SEL BIT(7)
- #define SSUSB_U2_PORT_HOST BIT(2)
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -21,7 +21,6 @@
- #include <linux/module.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
--#include <linux/pinctrl/consumer.h>
- #include <linux/platform_device.h>
-
- #include "mtu3.h"
-@@ -212,33 +211,6 @@ static void ssusb_ip_sw_reset(struct ssu
- mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
- }
-
--static int get_iddig_pinctrl(struct ssusb_mtk *ssusb)
--{
-- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
--
-- otg_sx->id_pinctrl = devm_pinctrl_get(ssusb->dev);
-- if (IS_ERR(otg_sx->id_pinctrl)) {
-- dev_err(ssusb->dev, "Cannot find id pinctrl!\n");
-- return PTR_ERR(otg_sx->id_pinctrl);
-- }
--
-- otg_sx->id_float =
-- pinctrl_lookup_state(otg_sx->id_pinctrl, "id_float");
-- if (IS_ERR(otg_sx->id_float)) {
-- dev_err(ssusb->dev, "Cannot find pinctrl id_float!\n");
-- return PTR_ERR(otg_sx->id_float);
-- }
--
-- otg_sx->id_ground =
-- pinctrl_lookup_state(otg_sx->id_pinctrl, "id_ground");
-- if (IS_ERR(otg_sx->id_ground)) {
-- dev_err(ssusb->dev, "Cannot find pinctrl id_ground!\n");
-- return PTR_ERR(otg_sx->id_ground);
-- }
--
-- return 0;
--}
--
- /* ignore the error if the clock does not exist */
- static struct clk *get_optional_clk(struct device *dev, const char *id)
- {
-@@ -349,15 +321,11 @@ static int get_ssusb_rscs(struct platfor
- dev_err(ssusb->dev, "couldn't get extcon device\n");
- return -EPROBE_DEFER;
- }
-- if (otg_sx->manual_drd_enabled) {
-- ret = get_iddig_pinctrl(ssusb);
-- if (ret)
-- return ret;
-- }
- }
-
-- dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk:%x\n",
-- ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk);
-+ dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk: %x, drd: %s\n",
-+ ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk,
-+ otg_sx->manual_drd_enabled ? "manual" : "auto");
-
- return 0;
- }
diff --git a/target/linux/mediatek/patches-4.14/0109-usb-mtu3-add-support-for-usb3.1-IP.patch b/target/linux/mediatek/patches-4.14/0109-usb-mtu3-add-support-for-usb3.1-IP.patch
deleted file mode 100644
index f44ce4e155..0000000000
--- a/target/linux/mediatek/patches-4.14/0109-usb-mtu3-add-support-for-usb3.1-IP.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 8f444887e23b9f0ea31aaae74fbc18171714d8d2 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:43 +0800
-Subject: [PATCH 109/224] usb: mtu3: add support for usb3.1 IP
-
-Support SuperSpeedPlus for usb3.1 device IP
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3.h | 1 +
- drivers/usb/mtu3/mtu3_core.c | 14 +++++++++++---
- drivers/usb/mtu3/mtu3_gadget.c | 3 ++-
- drivers/usb/mtu3/mtu3_gadget_ep0.c | 16 ++++++++--------
- drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
- 5 files changed, 23 insertions(+), 12 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -94,6 +94,7 @@ enum mtu3_speed {
- MTU3_SPEED_FULL = 1,
- MTU3_SPEED_HIGH = 3,
- MTU3_SPEED_SUPER = 4,
-+ MTU3_SPEED_SUPER_PLUS = 5,
- };
-
- /**
---- a/drivers/usb/mtu3/mtu3_core.c
-+++ b/drivers/usb/mtu3/mtu3_core.c
-@@ -237,7 +237,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *m
-
- void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
- {
-- if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
-+ if (mtu->is_u3_ip && mtu->max_speed >= USB_SPEED_SUPER)
- mtu3_ss_func_set(mtu, is_on);
- else
- mtu3_hs_softconn_set(mtu, is_on);
-@@ -547,6 +547,9 @@ static void mtu3_set_speed(struct mtu3 *
- mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
- /* HS/FS detected by HW */
- mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
-+ } else if (mtu->max_speed == USB_SPEED_SUPER) {
-+ mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
-+ SSUSB_U3_PORT_SSP_SPEED);
- }
-
- dev_info(mtu->dev, "max_speed: %s\n",
-@@ -626,6 +629,10 @@ static irqreturn_t mtu3_link_isr(struct
- udev_speed = USB_SPEED_SUPER;
- maxpkt = 512;
- break;
-+ case MTU3_SPEED_SUPER_PLUS:
-+ udev_speed = USB_SPEED_SUPER_PLUS;
-+ maxpkt = 512;
-+ break;
- default:
- udev_speed = USB_SPEED_UNKNOWN;
- break;
-@@ -827,14 +834,15 @@ int ssusb_gadget_init(struct ssusb_mtk *
- case USB_SPEED_FULL:
- case USB_SPEED_HIGH:
- case USB_SPEED_SUPER:
-+ case USB_SPEED_SUPER_PLUS:
- break;
- default:
- dev_err(dev, "invalid max_speed: %s\n",
- usb_speed_string(mtu->max_speed));
- /* fall through */
- case USB_SPEED_UNKNOWN:
-- /* default as SS */
-- mtu->max_speed = USB_SPEED_SUPER;
-+ /* default as SSP */
-+ mtu->max_speed = USB_SPEED_SUPER_PLUS;
- break;
- }
-
---- a/drivers/usb/mtu3/mtu3_gadget.c
-+++ b/drivers/usb/mtu3/mtu3_gadget.c
-@@ -89,6 +89,7 @@ static int mtu3_ep_enable(struct mtu3_ep
-
- switch (mtu->g.speed) {
- case USB_SPEED_SUPER:
-+ case USB_SPEED_SUPER_PLUS:
- if (usb_endpoint_xfer_int(desc) ||
- usb_endpoint_xfer_isoc(desc)) {
- interval = desc->bInterval;
-@@ -456,7 +457,7 @@ static int mtu3_gadget_wakeup(struct usb
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(&mtu->lock, flags);
-- if (mtu->g.speed == USB_SPEED_SUPER) {
-+ if (mtu->g.speed >= USB_SPEED_SUPER) {
- mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
- } else {
- mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
---- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
-+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
-@@ -212,8 +212,8 @@ ep0_get_status(struct mtu3 *mtu, const s
- case USB_RECIP_DEVICE:
- result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
- result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
-- /* superspeed only */
-- if (mtu->g.speed == USB_SPEED_SUPER) {
-+
-+ if (mtu->g.speed >= USB_SPEED_SUPER) {
- result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
- result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
- }
-@@ -329,8 +329,8 @@ static int ep0_handle_feature_dev(struct
- handled = handle_test_mode(mtu, setup);
- break;
- case USB_DEVICE_U1_ENABLE:
-- if (mtu->g.speed != USB_SPEED_SUPER ||
-- mtu->g.state != USB_STATE_CONFIGURED)
-+ if (mtu->g.speed < USB_SPEED_SUPER ||
-+ mtu->g.state != USB_STATE_CONFIGURED)
- break;
-
- lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
-@@ -344,8 +344,8 @@ static int ep0_handle_feature_dev(struct
- handled = 1;
- break;
- case USB_DEVICE_U2_ENABLE:
-- if (mtu->g.speed != USB_SPEED_SUPER ||
-- mtu->g.state != USB_STATE_CONFIGURED)
-+ if (mtu->g.speed < USB_SPEED_SUPER ||
-+ mtu->g.state != USB_STATE_CONFIGURED)
- break;
-
- lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
-@@ -384,8 +384,8 @@ static int ep0_handle_feature(struct mtu
- break;
- case USB_RECIP_INTERFACE:
- /* superspeed only */
-- if ((value == USB_INTRF_FUNC_SUSPEND)
-- && (mtu->g.speed == USB_SPEED_SUPER)) {
-+ if (value == USB_INTRF_FUNC_SUSPEND &&
-+ mtu->g.speed >= USB_SPEED_SUPER) {
- /*
- * forward the request because function drivers
- * should handle it
---- a/drivers/usb/mtu3/mtu3_hw_regs.h
-+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
-@@ -467,6 +467,7 @@
- #define SSUSB_VBUS_CHG_INT_B_EN BIT(6)
-
- /* U3D_SSUSB_U3_CTRL_0P */
-+#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
- #define SSUSB_U3_PORT_HOST_SEL BIT(2)
- #define SSUSB_U3_PORT_PDN BIT(1)
- #define SSUSB_U3_PORT_DIS BIT(0)
diff --git a/target/linux/mediatek/patches-4.14/0110-usb-mtu3-get-optional-vbus-for-host-only-mode.patch b/target/linux/mediatek/patches-4.14/0110-usb-mtu3-get-optional-vbus-for-host-only-mode.patch
deleted file mode 100644
index 4bd367d80b..0000000000
--- a/target/linux/mediatek/patches-4.14/0110-usb-mtu3-get-optional-vbus-for-host-only-mode.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From b6712b72d1273e792ee8a533048ba731a3709163 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:44 +0800
-Subject: [PATCH 110/224] usb: mtu3: get optional vbus for host only mode
-
-When dr_mode is set as USB_DR_MODE_HOST, it's better to try to
-get optional vbus, this can increase flexibility, although we
-can set vbus as always on for regulator or put it in host driver
-to turn it on.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3_plat.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -300,10 +300,6 @@ static int get_ssusb_rscs(struct platfor
- of_property_read_u32(node, "mediatek,u3p-dis-msk",
- &ssusb->u3p_dis_msk);
-
-- if (ssusb->dr_mode != USB_DR_MODE_OTG)
-- return 0;
--
-- /* if dual-role mode is supported */
- vbus = devm_regulator_get(&pdev->dev, "vbus");
- if (IS_ERR(vbus)) {
- dev_err(dev, "failed to get vbus\n");
-@@ -311,6 +307,10 @@ static int get_ssusb_rscs(struct platfor
- }
- otg_sx->vbus = vbus;
-
-+ if (ssusb->dr_mode == USB_DR_MODE_HOST)
-+ return 0;
-+
-+ /* if dual-role mode is supported */
- otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
- otg_sx->manual_drd_enabled =
- of_property_read_bool(node, "enable-manual-drd");
diff --git a/target/linux/mediatek/patches-4.14/0111-usb-mtu3-set-invalid-dr_mode-as-dual-role-mode.patch b/target/linux/mediatek/patches-4.14/0111-usb-mtu3-set-invalid-dr_mode-as-dual-role-mode.patch
deleted file mode 100644
index c7d94aa7fd..0000000000
--- a/target/linux/mediatek/patches-4.14/0111-usb-mtu3-set-invalid-dr_mode-as-dual-role-mode.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From e315036cdbf8dad7cff4df9dfe8bcff2eddf2277 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:45 +0800
-Subject: [PATCH 111/224] usb: mtu3: set invalid dr_mode as dual-role mode
-
-Treat dr_mode of USB_DR_MODE_UNKNOWN as USB_DR_MODE_OTG to
-enhance functional robustness.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3_plat.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -283,10 +283,8 @@ static int get_ssusb_rscs(struct platfor
- return PTR_ERR(ssusb->ippc_base);
-
- ssusb->dr_mode = usb_get_dr_mode(dev);
-- if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN) {
-- dev_err(dev, "dr_mode is error\n");
-- return -EINVAL;
-- }
-+ if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
-+ ssusb->dr_mode = USB_DR_MODE_OTG;
-
- if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
- return 0;
diff --git a/target/linux/mediatek/patches-4.14/0112-usb-mtu3-set-otg_sel-for-u2port-only-if-works-as-dua.patch b/target/linux/mediatek/patches-4.14/0112-usb-mtu3-set-otg_sel-for-u2port-only-if-works-as-dua.patch
deleted file mode 100644
index a1be0e20f3..0000000000
--- a/target/linux/mediatek/patches-4.14/0112-usb-mtu3-set-otg_sel-for-u2port-only-if-works-as-dua.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 36f70702b66cd3453b65d46b5c26ea87d8897363 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:46 +0800
-Subject: [PATCH 112/224] usb: mtu3: set otg_sel for u2port only if works as
- dual-role mode
-
-When set otg_sel(SSUSB_U2_PORT_OTG_SEL) for u2port which supports
-dual-role mode, the controller will automatically switch mode
-between host and device according to IDDIG signal. But if the
-u2port only supports device mode, and no IDDIG pin is provided,
-setting otg_sel may cause failure of detection by host.
-So set it only for dual-role mode.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/mtu3/mtu3_core.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3_core.c
-+++ b/drivers/usb/mtu3/mtu3_core.c
-@@ -115,7 +115,9 @@ static int mtu3_device_enable(struct mtu
- mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
- (SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
- SSUSB_U2_PORT_HOST_SEL));
-- mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
-+
-+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
-+ mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
-
- return ssusb_check_clocks(mtu->ssusb, check_clk);
- }
-@@ -130,7 +132,10 @@ static void mtu3_device_disable(struct m
-
- mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
- SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
-- mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
-+
-+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
-+ mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
-+
- mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
- }
-
diff --git a/target/linux/mediatek/patches-4.14/0113-dt-bindings-usb-mtu3-add-a-optional-property-to-disa.patch b/target/linux/mediatek/patches-4.14/0113-dt-bindings-usb-mtu3-add-a-optional-property-to-disa.patch
deleted file mode 100644
index 21d65e565d..0000000000
--- a/target/linux/mediatek/patches-4.14/0113-dt-bindings-usb-mtu3-add-a-optional-property-to-disa.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 6b6f2c178ee2cd57713993e3cf0afbe4effb2578 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:47 +0800
-Subject: [PATCH 113/224] dt-bindings: usb: mtu3: add a optional property to
- disable u3ports
-
-Add a new optional property to disable u3ports
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-@@ -44,6 +44,8 @@ Optional properties:
- - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
- control register, it depends on "mediatek,enable-wakeup".
-+ - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-+ bit1 for u3port1, ... etc;
-
- Sub-nodes:
- The xhci should be added as subnode to mtu3 as shown in the following example
diff --git a/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch b/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch
deleted file mode 100644
index c52de97c16..0000000000
--- a/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 2c90367440a0dbf9962e7a7f701b0e7a320d325a Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:48 +0800
-Subject: [PATCH 114/224] dt-bindings: usb: mtu3: remove dummy clocks and add
- optional ones
-
-Remove dummy clocks for usb wakeup and add optional ones for
-mcu_bus and dma_bus bus.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-@@ -14,9 +14,9 @@ Required properties:
- - vusb33-supply : regulator of USB avdd3.3v
- - clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
-- - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
-- "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
-- depends on "mediatek,enable-wakeup"
-+ - clock-names : must contain "sys_ck" for clock of controller,
-+ the following clocks are optional:
-+ "ref_ck", "mcu_ck" and "dam_ck";
- - phys : a list of phandle + phy specifier pairs
- - dr_mode : should be one of "host", "peripheral" or "otg",
- refer to usb/generic.txt
-@@ -65,9 +65,7 @@ ssusb: usb@11271000 {
- clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
- <&pericfg CLK_PERI_USB0>,
- <&pericfg CLK_PERI_USB1>;
-- clock-names = "sys_ck", "ref_ck",
-- "wakeup_deb_p0",
-- "wakeup_deb_p1";
-+ clock-names = "sys_ck", "ref_ck";
- vusb33-supply = <&mt6397_vusb_reg>;
- vbus-supply = <&usb_p0_vbus>;
- extcon = <&extcon_usb>;
diff --git a/target/linux/mediatek/patches-4.14/0115-dt-bindings-usb-mtu3-remove-optional-pinctrls.patch b/target/linux/mediatek/patches-4.14/0115-dt-bindings-usb-mtu3-remove-optional-pinctrls.patch
deleted file mode 100644
index f1f083ddb9..0000000000
--- a/target/linux/mediatek/patches-4.14/0115-dt-bindings-usb-mtu3-remove-optional-pinctrls.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From df2f0d10213798a806c90bc06db6bed501e7bf7d Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:49 +0800
-Subject: [PATCH 115/224] dt-bindings: usb: mtu3: remove optional pinctrls
-
-Remove optional pinctrls due to using FORCE/RG_IDDIG to implement
-manual switch function.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-@@ -30,9 +30,10 @@ Optional properties:
- when supports dual-role mode.
- - vbus-supply : reference to the VBUS regulator, needed when supports
- dual-role mode.
-- - pinctl-names : a pinctrl state named "default" must be defined,
-- "id_float" and "id_ground" are optinal which depends on
-- "mediatek,enable-manual-drd"
-+ - pinctrl-names : a pinctrl state named "default" is optional, and need be
-+ defined if auto drd switch is enabled, that means the property dr_mode
-+ is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
-+ is not set.
- - pinctrl-0 : pin control group
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
diff --git a/target/linux/mediatek/patches-4.14/0116-dt-bindings-arm-mediatek-add-MT7622-string-to-the-PM.patch b/target/linux/mediatek/patches-4.14/0116-dt-bindings-arm-mediatek-add-MT7622-string-to-the-PM.patch
deleted file mode 100644
index 919e6af8c8..0000000000
--- a/target/linux/mediatek/patches-4.14/0116-dt-bindings-arm-mediatek-add-MT7622-string-to-the-PM.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 1567cde49a0f2304e18c08e2ccd830e0686fc0a7 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:42 +0800
-Subject: [PATCH 116/224] dt-bindings: arm: mediatek: add MT7622 string to the
- PMIC wrapper doc
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- Documentation/devicetree/bindings/soc/mediatek/pwrap.txt | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
-+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
-@@ -19,6 +19,7 @@ IP Pairing
- Required properties in pwrap device node.
- - compatible:
- "mediatek,mt2701-pwrap" for MT2701/7623 SoCs
-+ "mediatek,mt7622-pwrap" for MT7622 SoCs
- "mediatek,mt8135-pwrap" for MT8135 SoCs
- "mediatek,mt8173-pwrap" for MT8173 SoCs
- - interrupts: IRQ for pwrap in SOC
-@@ -36,9 +37,12 @@ Required properties in pwrap device node
- - clocks: Must contain an entry for each entry in clock-names.
-
- Optional properities:
--- pmic: Mediatek PMIC MFD is the child device of pwrap
-+- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
- See the following for child node definitions:
- Documentation/devicetree/bindings/mfd/mt6397.txt
-+ or the regulator-only device as the child device of pwrap, such as MT6380.
-+ See the following definitions for such kinds of devices.
-+ Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
- Example:
- pwrap: pwrap@1000f000 {
diff --git a/target/linux/mediatek/patches-4.14/0117-soc-mediatek-pwrap-add-pwrap_read32-for-reading-in-3.patch b/target/linux/mediatek/patches-4.14/0117-soc-mediatek-pwrap-add-pwrap_read32-for-reading-in-3.patch
deleted file mode 100644
index ce0b0fe473..0000000000
--- a/target/linux/mediatek/patches-4.14/0117-soc-mediatek-pwrap-add-pwrap_read32-for-reading-in-3.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 9c37953bd08daa3ca227098d763e980d1898add3 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:43 +0800
-Subject: [PATCH 117/224] soc: mediatek: pwrap: add pwrap_read32 for reading in
- 32-bit mode
-
-Some regulators such as MediaTek MT6380 has to be read in 32-bit mode.
-So the patch adds pwrap_read32, rename old pwrap_read into pwrap_read16
-and one function pointer is introduced for increasing flexibility allowing
-the determination which mode is used by the pwrap slave detection through
-device tree.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 55 +++++++++++++++++++++++++++++++++++-
- 1 file changed, 54 insertions(+), 1 deletion(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -487,6 +487,7 @@ static int mt8135_regs[] = {
-
- enum pmic_type {
- PMIC_MT6323,
-+ PMIC_MT6380,
- PMIC_MT6397,
- };
-
-@@ -496,9 +497,16 @@ enum pwrap_type {
- PWRAP_MT8173,
- };
-
-+struct pmic_wrapper;
- struct pwrap_slv_type {
- const u32 *dew_regs;
- enum pmic_type type;
-+ /*
-+ * pwrap operations are highly associated with the PMIC types,
-+ * so the pointers added increases flexibility allowing determination
-+ * which type is used by the detection through device tree.
-+ */
-+ int (*pwrap_read)(struct pmic_wrapper *wrp, u32 adr, u32 *rdata);
- };
-
- struct pmic_wrapper {
-@@ -609,7 +617,7 @@ static int pwrap_write(struct pmic_wrapp
- return 0;
- }
-
--static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
-+static int pwrap_read16(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
- {
- int ret;
-
-@@ -632,6 +640,39 @@ static int pwrap_read(struct pmic_wrappe
- return 0;
- }
-
-+static int pwrap_read32(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
-+{
-+ int ret, msb;
-+
-+ *rdata = 0;
-+ for (msb = 0; msb < 2; msb++) {
-+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
-+ if (ret) {
-+ pwrap_leave_fsm_vldclr(wrp);
-+ return ret;
-+ }
-+
-+ pwrap_writel(wrp, ((msb << 30) | (adr << 16)),
-+ PWRAP_WACS2_CMD);
-+
-+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
-+ if (ret)
-+ return ret;
-+
-+ *rdata += (PWRAP_GET_WACS_RDATA(pwrap_readl(wrp,
-+ PWRAP_WACS2_RDATA)) << (16 * msb));
-+
-+ pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
-+ }
-+
-+ return 0;
-+}
-+
-+static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
-+{
-+ return wrp->slave->pwrap_read(wrp, adr, rdata);
-+}
-+
- static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
- {
- return pwrap_read(context, adr, rdata);
-@@ -752,6 +793,8 @@ static int pwrap_mt2701_init_reg_clock(s
- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
- break;
-+ default:
-+ break;
- }
-
- return 0;
-@@ -815,6 +858,8 @@ static int pwrap_init_cipher(struct pmic
- pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_EN],
- 0x1);
- break;
-+ default:
-+ break;
- }
-
- /* wait for cipher data ready@AP */
-@@ -1036,11 +1081,19 @@ static const struct regmap_config pwrap_
- static const struct pwrap_slv_type pmic_mt6323 = {
- .dew_regs = mt6323_regs,
- .type = PMIC_MT6323,
-+ .pwrap_read = pwrap_read16,
-+};
-+
-+static const struct pwrap_slv_type pmic_mt6380 = {
-+ .dew_regs = NULL,
-+ .type = PMIC_MT6380,
-+ .pwrap_read = pwrap_read32,
- };
-
- static const struct pwrap_slv_type pmic_mt6397 = {
- .dew_regs = mt6397_regs,
- .type = PMIC_MT6397,
-+ .pwrap_read = pwrap_read16,
- };
-
- static const struct of_device_id of_slave_match_tbl[] = {
diff --git a/target/linux/mediatek/patches-4.14/0118-soc-mediatek-pwrap-add-pwrap_write32-for-writing-in-.patch b/target/linux/mediatek/patches-4.14/0118-soc-mediatek-pwrap-add-pwrap_write32-for-writing-in-.patch
deleted file mode 100644
index 0fb60f37bb..0000000000
--- a/target/linux/mediatek/patches-4.14/0118-soc-mediatek-pwrap-add-pwrap_write32-for-writing-in-.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 635f800995e4ea2a18ce7520d816dab018ce091f Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:44 +0800
-Subject: [PATCH 118/224] soc: mediatek: pwrap: add pwrap_write32 for writing
- in 32-bit mode
-
-Some regulators such as MediaTek MT6380 also has to be written in
-32-bit mode. So the patch adds pwrap_write32, rename old pwrap_write
-into pwrap_write16 and one additional function pointer is introduced
-for increasing flexibility allowing the determination which mode is
-used by the pwrap slave detection through device tree.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 70 +++++++++++++++++++++++++++---------
- 1 file changed, 54 insertions(+), 16 deletions(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -507,6 +507,7 @@ struct pwrap_slv_type {
- * which type is used by the detection through device tree.
- */
- int (*pwrap_read)(struct pmic_wrapper *wrp, u32 adr, u32 *rdata);
-+ int (*pwrap_write)(struct pmic_wrapper *wrp, u32 adr, u32 wdata);
- };
-
- struct pmic_wrapper {
-@@ -601,22 +602,6 @@ static int pwrap_wait_for_state(struct p
- } while (1);
- }
-
--static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
--{
-- int ret;
--
-- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
-- if (ret) {
-- pwrap_leave_fsm_vldclr(wrp);
-- return ret;
-- }
--
-- pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata,
-- PWRAP_WACS2_CMD);
--
-- return 0;
--}
--
- static int pwrap_read16(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
- {
- int ret;
-@@ -673,6 +658,56 @@ static int pwrap_read(struct pmic_wrappe
- return wrp->slave->pwrap_read(wrp, adr, rdata);
- }
-
-+static int pwrap_write16(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
-+{
-+ int ret;
-+
-+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
-+ if (ret) {
-+ pwrap_leave_fsm_vldclr(wrp);
-+ return ret;
-+ }
-+
-+ pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata,
-+ PWRAP_WACS2_CMD);
-+
-+ return 0;
-+}
-+
-+static int pwrap_write32(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
-+{
-+ int ret, msb, rdata;
-+
-+ for (msb = 0; msb < 2; msb++) {
-+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
-+ if (ret) {
-+ pwrap_leave_fsm_vldclr(wrp);
-+ return ret;
-+ }
-+
-+ pwrap_writel(wrp, (1 << 31) | (msb << 30) | (adr << 16) |
-+ ((wdata >> (msb * 16)) & 0xffff),
-+ PWRAP_WACS2_CMD);
-+
-+ /*
-+ * The pwrap_read operation is the requirement of hardware used
-+ * for the synchronization between two successive 16-bit
-+ * pwrap_writel operations composing one 32-bit bus writing.
-+ * Otherwise, we'll find the result fails on the lower 16-bit
-+ * pwrap writing.
-+ */
-+ if (!msb)
-+ pwrap_read(wrp, adr, &rdata);
-+ }
-+
-+ return 0;
-+}
-+
-+static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
-+{
-+ return wrp->slave->pwrap_write(wrp, adr, wdata);
-+}
-+
- static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
- {
- return pwrap_read(context, adr, rdata);
-@@ -1082,18 +1117,21 @@ static const struct pwrap_slv_type pmic_
- .dew_regs = mt6323_regs,
- .type = PMIC_MT6323,
- .pwrap_read = pwrap_read16,
-+ .pwrap_write = pwrap_write16,
- };
-
- static const struct pwrap_slv_type pmic_mt6380 = {
- .dew_regs = NULL,
- .type = PMIC_MT6380,
- .pwrap_read = pwrap_read32,
-+ .pwrap_write = pwrap_write32,
- };
-
- static const struct pwrap_slv_type pmic_mt6397 = {
- .dew_regs = mt6397_regs,
- .type = PMIC_MT6397,
- .pwrap_read = pwrap_read16,
-+ .pwrap_write = pwrap_write16,
- };
-
- static const struct of_device_id of_slave_match_tbl[] = {
diff --git a/target/linux/mediatek/patches-4.14/0119-soc-mediatek-pwrap-refactor-pwrap_init-for-the-vario.patch b/target/linux/mediatek/patches-4.14/0119-soc-mediatek-pwrap-refactor-pwrap_init-for-the-vario.patch
deleted file mode 100644
index a9f720c90a..0000000000
--- a/target/linux/mediatek/patches-4.14/0119-soc-mediatek-pwrap-refactor-pwrap_init-for-the-vario.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From 16bebe4ad52083316907fb7149c797cd331f5948 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:45 +0800
-Subject: [PATCH 119/224] soc: mediatek: pwrap: refactor pwrap_init for the
- various PMIC types
-
-pwrap initialization is highly associated with the base SoC and the
-target PMICs, so slight refactorization is made here for allowing
-pwrap_init to run on those PMICs with different capability from the
-previous MediaTek PMICs and the determination for the enablement of the
-pwrap capability depending on PMIC type. Apart from this, the patch
-makes the driver more extensible especially when more PMICs join into
-the pwrap driver.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 130 ++++++++++++++++++++++++-----------
- 1 file changed, 90 insertions(+), 40 deletions(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -70,6 +70,12 @@
- PWRAP_WDT_SRC_EN_HARB_STAUPD_DLE | \
- PWRAP_WDT_SRC_EN_HARB_STAUPD_ALE)
-
-+/* Group of bits used for shown slave capability */
-+#define PWRAP_SLV_CAP_SPI BIT(0)
-+#define PWRAP_SLV_CAP_DUALIO BIT(1)
-+#define PWRAP_SLV_CAP_SECURITY BIT(2)
-+#define HAS_CAP(_c, _x) (((_c) & (_x)) == (_x))
-+
- /* defines for slave device wrapper registers */
- enum dew_regs {
- PWRAP_DEW_BASE,
-@@ -501,6 +507,8 @@ struct pmic_wrapper;
- struct pwrap_slv_type {
- const u32 *dew_regs;
- enum pmic_type type;
-+ /* Flags indicating the capability for the target slave */
-+ u32 caps;
- /*
- * pwrap operations are highly associated with the PMIC types,
- * so the pointers added increases flexibility allowing determination
-@@ -787,6 +795,37 @@ static int pwrap_init_sidly(struct pmic_
- return 0;
- }
-
-+static int pwrap_init_dual_io(struct pmic_wrapper *wrp)
-+{
-+ int ret;
-+ u32 rdata;
-+
-+ /* Enable dual IO mode */
-+ pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_DIO_EN], 1);
-+
-+ /* Check IDLE & INIT_DONE in advance */
-+ ret = pwrap_wait_for_state(wrp,
-+ pwrap_is_fsm_idle_and_sync_idle);
-+ if (ret) {
-+ dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
-+ return ret;
-+ }
-+
-+ pwrap_writel(wrp, 1, PWRAP_DIO_EN);
-+
-+ /* Read Test */
-+ pwrap_read(wrp,
-+ wrp->slave->dew_regs[PWRAP_DEW_READ_TEST], &rdata);
-+ if (rdata != PWRAP_DEW_READ_TEST_VAL) {
-+ dev_err(wrp->dev,
-+ "Read failed on DIO mode: 0x%04x!=0x%04x\n",
-+ PWRAP_DEW_READ_TEST_VAL, rdata);
-+ return -EFAULT;
-+ }
-+
-+ return 0;
-+}
-+
- static int pwrap_mt8135_init_reg_clock(struct pmic_wrapper *wrp)
- {
- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
-@@ -935,6 +974,30 @@ static int pwrap_init_cipher(struct pmic
- return 0;
- }
-
-+static int pwrap_init_security(struct pmic_wrapper *wrp)
-+{
-+ int ret;
-+
-+ /* Enable encryption */
-+ ret = pwrap_init_cipher(wrp);
-+ if (ret)
-+ return ret;
-+
-+ /* Signature checking - using CRC */
-+ if (pwrap_write(wrp,
-+ wrp->slave->dew_regs[PWRAP_DEW_CRC_EN], 0x1))
-+ return -EFAULT;
-+
-+ pwrap_writel(wrp, 0x1, PWRAP_CRC_EN);
-+ pwrap_writel(wrp, 0x0, PWRAP_SIG_MODE);
-+ pwrap_writel(wrp, wrp->slave->dew_regs[PWRAP_DEW_CRC_VAL],
-+ PWRAP_SIG_ADR);
-+ pwrap_writel(wrp,
-+ wrp->master->arb_en_all, PWRAP_HIPRIO_ARB_EN);
-+
-+ return 0;
-+}
-+
- static int pwrap_mt8135_init_soc_specific(struct pmic_wrapper *wrp)
- {
- /* enable pwrap events and pwrap bridge in AP side */
-@@ -995,7 +1058,6 @@ static int pwrap_mt2701_init_soc_specifi
- static int pwrap_init(struct pmic_wrapper *wrp)
- {
- int ret;
-- u32 rdata;
-
- reset_control_reset(wrp->rstc);
- if (wrp->rstc_bridge)
-@@ -1007,10 +1069,12 @@ static int pwrap_init(struct pmic_wrappe
- pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
- }
-
-- /* Reset SPI slave */
-- ret = pwrap_reset_spislave(wrp);
-- if (ret)
-- return ret;
-+ if (HAS_CAP(wrp->slave->caps, PWRAP_SLV_CAP_SPI)) {
-+ /* Reset SPI slave */
-+ ret = pwrap_reset_spislave(wrp);
-+ if (ret)
-+ return ret;
-+ }
-
- pwrap_writel(wrp, 1, PWRAP_WRAP_EN);
-
-@@ -1022,45 +1086,26 @@ static int pwrap_init(struct pmic_wrappe
- if (ret)
- return ret;
-
-- /* Setup serial input delay */
-- ret = pwrap_init_sidly(wrp);
-- if (ret)
-- return ret;
--
-- /* Enable dual IO mode */
-- pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_DIO_EN], 1);
--
-- /* Check IDLE & INIT_DONE in advance */
-- ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle);
-- if (ret) {
-- dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret);
-- return ret;
-+ if (HAS_CAP(wrp->slave->caps, PWRAP_SLV_CAP_SPI)) {
-+ /* Setup serial input delay */
-+ ret = pwrap_init_sidly(wrp);
-+ if (ret)
-+ return ret;
- }
-
-- pwrap_writel(wrp, 1, PWRAP_DIO_EN);
--
-- /* Read Test */
-- pwrap_read(wrp, wrp->slave->dew_regs[PWRAP_DEW_READ_TEST], &rdata);
-- if (rdata != PWRAP_DEW_READ_TEST_VAL) {
-- dev_err(wrp->dev, "Read test failed after switch to DIO mode: 0x%04x != 0x%04x\n",
-- PWRAP_DEW_READ_TEST_VAL, rdata);
-- return -EFAULT;
-+ if (HAS_CAP(wrp->slave->caps, PWRAP_SLV_CAP_DUALIO)) {
-+ /* Enable dual I/O mode */
-+ ret = pwrap_init_dual_io(wrp);
-+ if (ret)
-+ return ret;
- }
-
-- /* Enable encryption */
-- ret = pwrap_init_cipher(wrp);
-- if (ret)
-- return ret;
--
-- /* Signature checking - using CRC */
-- if (pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CRC_EN], 0x1))
-- return -EFAULT;
--
-- pwrap_writel(wrp, 0x1, PWRAP_CRC_EN);
-- pwrap_writel(wrp, 0x0, PWRAP_SIG_MODE);
-- pwrap_writel(wrp, wrp->slave->dew_regs[PWRAP_DEW_CRC_VAL],
-- PWRAP_SIG_ADR);
-- pwrap_writel(wrp, wrp->master->arb_en_all, PWRAP_HIPRIO_ARB_EN);
-+ if (HAS_CAP(wrp->slave->caps, PWRAP_SLV_CAP_SECURITY)) {
-+ /* Enable security on bus */
-+ ret = pwrap_init_security(wrp);
-+ if (ret)
-+ return ret;
-+ }
-
- if (wrp->master->type == PWRAP_MT8135)
- pwrap_writel(wrp, 0x7, PWRAP_RRARB_EN);
-@@ -1116,6 +1161,8 @@ static const struct regmap_config pwrap_
- static const struct pwrap_slv_type pmic_mt6323 = {
- .dew_regs = mt6323_regs,
- .type = PMIC_MT6323,
-+ .caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
-+ PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
- };
-@@ -1123,6 +1170,7 @@ static const struct pwrap_slv_type pmic_
- static const struct pwrap_slv_type pmic_mt6380 = {
- .dew_regs = NULL,
- .type = PMIC_MT6380,
-+ .caps = 0,
- .pwrap_read = pwrap_read32,
- .pwrap_write = pwrap_write32,
- };
-@@ -1130,6 +1178,8 @@ static const struct pwrap_slv_type pmic_
- static const struct pwrap_slv_type pmic_mt6397 = {
- .dew_regs = mt6397_regs,
- .type = PMIC_MT6397,
-+ .caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
-+ PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
- };
diff --git a/target/linux/mediatek/patches-4.14/0120-soc-mediatek-pwrap-add-MediaTek-MT6380-as-one-slave-.patch b/target/linux/mediatek/patches-4.14/0120-soc-mediatek-pwrap-add-MediaTek-MT6380-as-one-slave-.patch
deleted file mode 100644
index 8ace9150a4..0000000000
--- a/target/linux/mediatek/patches-4.14/0120-soc-mediatek-pwrap-add-MediaTek-MT6380-as-one-slave-.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 81c54afc5bc918ea3ed65cc356236b302b1f21ca Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:46 +0800
-Subject: [PATCH 120/224] soc: mediatek: pwrap: add MediaTek MT6380 as one
- slave of pwrap
-
-Add MediaTek MT6380 regulator becoming one of PMIC wrapper slave
-and also add extra new regmap_config of 32-bit mode for MT6380
-since old regmap_config of 16-bit mode can't be fit into the need.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 24 +++++++++++++++++++++---
- 1 file changed, 21 insertions(+), 3 deletions(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -507,6 +507,7 @@ struct pmic_wrapper;
- struct pwrap_slv_type {
- const u32 *dew_regs;
- enum pmic_type type;
-+ const struct regmap_config *regmap;
- /* Flags indicating the capability for the target slave */
- u32 caps;
- /*
-@@ -1149,7 +1150,7 @@ static irqreturn_t pwrap_interrupt(int i
- return IRQ_HANDLED;
- }
-
--static const struct regmap_config pwrap_regmap_config = {
-+static const struct regmap_config pwrap_regmap_config16 = {
- .reg_bits = 16,
- .val_bits = 16,
- .reg_stride = 2,
-@@ -1158,9 +1159,19 @@ static const struct regmap_config pwrap_
- .max_register = 0xffff,
- };
-
-+static const struct regmap_config pwrap_regmap_config32 = {
-+ .reg_bits = 32,
-+ .val_bits = 32,
-+ .reg_stride = 4,
-+ .reg_read = pwrap_regmap_read,
-+ .reg_write = pwrap_regmap_write,
-+ .max_register = 0xffff,
-+};
-+
- static const struct pwrap_slv_type pmic_mt6323 = {
- .dew_regs = mt6323_regs,
- .type = PMIC_MT6323,
-+ .regmap = &pwrap_regmap_config16,
- .caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
- PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
-@@ -1170,6 +1181,7 @@ static const struct pwrap_slv_type pmic_
- static const struct pwrap_slv_type pmic_mt6380 = {
- .dew_regs = NULL,
- .type = PMIC_MT6380,
-+ .regmap = &pwrap_regmap_config32,
- .caps = 0,
- .pwrap_read = pwrap_read32,
- .pwrap_write = pwrap_write32,
-@@ -1178,6 +1190,7 @@ static const struct pwrap_slv_type pmic_
- static const struct pwrap_slv_type pmic_mt6397 = {
- .dew_regs = mt6397_regs,
- .type = PMIC_MT6397,
-+ .regmap = &pwrap_regmap_config16,
- .caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO |
- PWRAP_SLV_CAP_SECURITY,
- .pwrap_read = pwrap_read16,
-@@ -1189,9 +1202,14 @@ static const struct of_device_id of_slav
- .compatible = "mediatek,mt6323",
- .data = &pmic_mt6323,
- }, {
-+ /* The MT6380 PMIC only implements a regulator, so we bind it
-+ * directly instead of using a MFD.
-+ */
-+ .compatible = "mediatek,mt6380-regulator",
-+ .data = &pmic_mt6380,
-+ }, {
- .compatible = "mediatek,mt6397",
- .data = &pmic_mt6397,
-- }, {
- /* sentinel */
- }
- };
-@@ -1372,7 +1390,7 @@ static int pwrap_probe(struct platform_d
- if (ret)
- goto err_out2;
-
-- wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config);
-+ wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, wrp->slave->regmap);
- if (IS_ERR(wrp->regmap)) {
- ret = PTR_ERR(wrp->regmap);
- goto err_out2;
diff --git a/target/linux/mediatek/patches-4.14/0121-soc-mediatek-pwrap-add-common-way-for-setup-CS-timin.patch b/target/linux/mediatek/patches-4.14/0121-soc-mediatek-pwrap-add-common-way-for-setup-CS-timin.patch
deleted file mode 100644
index 7b60c68e4b..0000000000
--- a/target/linux/mediatek/patches-4.14/0121-soc-mediatek-pwrap-add-common-way-for-setup-CS-timin.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 442c890727e0f585154662b0908fbe3a7986052a Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:47 +0800
-Subject: [PATCH 121/224] soc: mediatek: pwrap: add common way for setup CS
- timing extenstion
-
-Multiple platforms would always use their own way handling CS timing
-extension on the bus which leads to a little bit code duplication.
-Therefore, the patch groups the similar logic to handle CS timing
-extension into the common function which allows the following SoCs
-have more reusability for configing CS timing.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 59 ++++++++++++++++++++++--------------
- 1 file changed, 37 insertions(+), 22 deletions(-)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -827,23 +827,44 @@ static int pwrap_init_dual_io(struct pmi
- return 0;
- }
-
--static int pwrap_mt8135_init_reg_clock(struct pmic_wrapper *wrp)
--{
-- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
-- pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
-- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
-- pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
-- pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
--
-- return 0;
-+/*
-+ * pwrap_init_chip_select_ext is used to configure CS extension time for each
-+ * phase during data transactions on the pwrap bus.
-+ */
-+static void pwrap_init_chip_select_ext(struct pmic_wrapper *wrp, u8 hext_write,
-+ u8 hext_read, u8 lext_start,
-+ u8 lext_end)
-+{
-+ /*
-+ * After finishing a write and read transaction, extends CS high time
-+ * to be at least xT of BUS CLK as hext_write and hext_read specifies
-+ * respectively.
-+ */
-+ pwrap_writel(wrp, hext_write, PWRAP_CSHEXT_WRITE);
-+ pwrap_writel(wrp, hext_read, PWRAP_CSHEXT_READ);
-+
-+ /*
-+ * Extends CS low time after CSL and before CSH command to be at
-+ * least xT of BUS CLK as lext_start and lext_end specifies
-+ * respectively.
-+ */
-+ pwrap_writel(wrp, lext_start, PWRAP_CSLEXT_START);
-+ pwrap_writel(wrp, lext_end, PWRAP_CSLEXT_END);
- }
-
--static int pwrap_mt8173_init_reg_clock(struct pmic_wrapper *wrp)
-+static int pwrap_common_init_reg_clock(struct pmic_wrapper *wrp)
- {
-- pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
-- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
-+ switch (wrp->master->type) {
-+ case PWRAP_MT8173:
-+ pwrap_init_chip_select_ext(wrp, 0, 4, 2, 2);
-+ break;
-+ case PWRAP_MT8135:
-+ pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
-+ pwrap_init_chip_select_ext(wrp, 0, 4, 0, 0);
-+ break;
-+ default:
-+ break;
-+ }
-
- return 0;
- }
-@@ -853,20 +874,14 @@ static int pwrap_mt2701_init_reg_clock(s
- switch (wrp->slave->type) {
- case PMIC_MT6397:
- pwrap_writel(wrp, 0xc, PWRAP_RDDMY);
-- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
-- pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_READ);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
-+ pwrap_init_chip_select_ext(wrp, 4, 0, 2, 2);
- break;
-
- case PMIC_MT6323:
- pwrap_writel(wrp, 0x8, PWRAP_RDDMY);
- pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_RDDMY_NO],
- 0x8);
-- pwrap_writel(wrp, 0x5, PWRAP_CSHEXT_WRITE);
-- pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_READ);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
-- pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
-+ pwrap_init_chip_select_ext(wrp, 5, 0, 2, 2);
- break;
- default:
- break;
-@@ -1235,7 +1250,7 @@ static const struct pmic_wrapper_type pw
- .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
- .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
- .has_bridge = 1,
-- .init_reg_clock = pwrap_mt8135_init_reg_clock,
-+ .init_reg_clock = pwrap_common_init_reg_clock,
- .init_soc_specific = pwrap_mt8135_init_soc_specific,
- };
-
-@@ -1247,7 +1262,7 @@ static const struct pmic_wrapper_type pw
- .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
- .wdt_src = PWRAP_WDT_SRC_MASK_NO_STAUPD,
- .has_bridge = 0,
-- .init_reg_clock = pwrap_mt8173_init_reg_clock,
-+ .init_reg_clock = pwrap_common_init_reg_clock,
- .init_soc_specific = pwrap_mt8173_init_soc_specific,
- };
-
diff --git a/target/linux/mediatek/patches-4.14/0122-soc-mediatek-pwrap-add-support-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0122-soc-mediatek-pwrap-add-support-for-MT7622-SoC.patch
deleted file mode 100644
index b0ec04afc8..0000000000
--- a/target/linux/mediatek/patches-4.14/0122-soc-mediatek-pwrap-add-support-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,237 +0,0 @@
-From 87996dabef0d83bbd2ed5264b83b01224bc42968 Mon Sep 17 00:00:00 2001
-From: Chenglin Xu <chenglin.xu@mediatek.com>
-Date: Wed, 18 Oct 2017 16:28:48 +0800
-Subject: [PATCH 122/224] soc: mediatek: pwrap: add support for MT7622 SoC
-
-Add the registers, callbacks and data structures required to make the
-PMIC wrapper work on MT7622.
-
-Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/mtk-pmic-wrap.c | 170 +++++++++++++++++++++++++++++++++++
- 1 file changed, 170 insertions(+)
-
---- a/drivers/soc/mediatek/mtk-pmic-wrap.c
-+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
-@@ -214,6 +214,36 @@ enum pwrap_regs {
- PWRAP_ADC_RDATA_ADDR1,
- PWRAP_ADC_RDATA_ADDR2,
-
-+ /* MT7622 only regs */
-+ PWRAP_EINT_STA0_ADR,
-+ PWRAP_EINT_STA1_ADR,
-+ PWRAP_STA,
-+ PWRAP_CLR,
-+ PWRAP_DVFS_ADR8,
-+ PWRAP_DVFS_WDATA8,
-+ PWRAP_DVFS_ADR9,
-+ PWRAP_DVFS_WDATA9,
-+ PWRAP_DVFS_ADR10,
-+ PWRAP_DVFS_WDATA10,
-+ PWRAP_DVFS_ADR11,
-+ PWRAP_DVFS_WDATA11,
-+ PWRAP_DVFS_ADR12,
-+ PWRAP_DVFS_WDATA12,
-+ PWRAP_DVFS_ADR13,
-+ PWRAP_DVFS_WDATA13,
-+ PWRAP_DVFS_ADR14,
-+ PWRAP_DVFS_WDATA14,
-+ PWRAP_DVFS_ADR15,
-+ PWRAP_DVFS_WDATA15,
-+ PWRAP_EXT_CK,
-+ PWRAP_ADC_RDATA_ADDR,
-+ PWRAP_GPS_STA,
-+ PWRAP_SW_RST,
-+ PWRAP_DVFS_STEP_CTRL0,
-+ PWRAP_DVFS_STEP_CTRL1,
-+ PWRAP_DVFS_STEP_CTRL2,
-+ PWRAP_SPI2_CTRL,
-+
- /* MT8135 only regs */
- PWRAP_CSHEXT,
- PWRAP_EVENT_IN_EN,
-@@ -336,6 +366,118 @@ static int mt2701_regs[] = {
- [PWRAP_ADC_RDATA_ADDR2] = 0x154,
- };
-
-+static int mt7622_regs[] = {
-+ [PWRAP_MUX_SEL] = 0x0,
-+ [PWRAP_WRAP_EN] = 0x4,
-+ [PWRAP_DIO_EN] = 0x8,
-+ [PWRAP_SIDLY] = 0xC,
-+ [PWRAP_RDDMY] = 0x10,
-+ [PWRAP_SI_CK_CON] = 0x14,
-+ [PWRAP_CSHEXT_WRITE] = 0x18,
-+ [PWRAP_CSHEXT_READ] = 0x1C,
-+ [PWRAP_CSLEXT_START] = 0x20,
-+ [PWRAP_CSLEXT_END] = 0x24,
-+ [PWRAP_STAUPD_PRD] = 0x28,
-+ [PWRAP_STAUPD_GRPEN] = 0x2C,
-+ [PWRAP_EINT_STA0_ADR] = 0x30,
-+ [PWRAP_EINT_STA1_ADR] = 0x34,
-+ [PWRAP_STA] = 0x38,
-+ [PWRAP_CLR] = 0x3C,
-+ [PWRAP_STAUPD_MAN_TRIG] = 0x40,
-+ [PWRAP_STAUPD_STA] = 0x44,
-+ [PWRAP_WRAP_STA] = 0x48,
-+ [PWRAP_HARB_INIT] = 0x4C,
-+ [PWRAP_HARB_HPRIO] = 0x50,
-+ [PWRAP_HIPRIO_ARB_EN] = 0x54,
-+ [PWRAP_HARB_STA0] = 0x58,
-+ [PWRAP_HARB_STA1] = 0x5C,
-+ [PWRAP_MAN_EN] = 0x60,
-+ [PWRAP_MAN_CMD] = 0x64,
-+ [PWRAP_MAN_RDATA] = 0x68,
-+ [PWRAP_MAN_VLDCLR] = 0x6C,
-+ [PWRAP_WACS0_EN] = 0x70,
-+ [PWRAP_INIT_DONE0] = 0x74,
-+ [PWRAP_WACS0_CMD] = 0x78,
-+ [PWRAP_WACS0_RDATA] = 0x7C,
-+ [PWRAP_WACS0_VLDCLR] = 0x80,
-+ [PWRAP_WACS1_EN] = 0x84,
-+ [PWRAP_INIT_DONE1] = 0x88,
-+ [PWRAP_WACS1_CMD] = 0x8C,
-+ [PWRAP_WACS1_RDATA] = 0x90,
-+ [PWRAP_WACS1_VLDCLR] = 0x94,
-+ [PWRAP_WACS2_EN] = 0x98,
-+ [PWRAP_INIT_DONE2] = 0x9C,
-+ [PWRAP_WACS2_CMD] = 0xA0,
-+ [PWRAP_WACS2_RDATA] = 0xA4,
-+ [PWRAP_WACS2_VLDCLR] = 0xA8,
-+ [PWRAP_INT_EN] = 0xAC,
-+ [PWRAP_INT_FLG_RAW] = 0xB0,
-+ [PWRAP_INT_FLG] = 0xB4,
-+ [PWRAP_INT_CLR] = 0xB8,
-+ [PWRAP_SIG_ADR] = 0xBC,
-+ [PWRAP_SIG_MODE] = 0xC0,
-+ [PWRAP_SIG_VALUE] = 0xC4,
-+ [PWRAP_SIG_ERRVAL] = 0xC8,
-+ [PWRAP_CRC_EN] = 0xCC,
-+ [PWRAP_TIMER_EN] = 0xD0,
-+ [PWRAP_TIMER_STA] = 0xD4,
-+ [PWRAP_WDT_UNIT] = 0xD8,
-+ [PWRAP_WDT_SRC_EN] = 0xDC,
-+ [PWRAP_WDT_FLG] = 0xE0,
-+ [PWRAP_DEBUG_INT_SEL] = 0xE4,
-+ [PWRAP_DVFS_ADR0] = 0xE8,
-+ [PWRAP_DVFS_WDATA0] = 0xEC,
-+ [PWRAP_DVFS_ADR1] = 0xF0,
-+ [PWRAP_DVFS_WDATA1] = 0xF4,
-+ [PWRAP_DVFS_ADR2] = 0xF8,
-+ [PWRAP_DVFS_WDATA2] = 0xFC,
-+ [PWRAP_DVFS_ADR3] = 0x100,
-+ [PWRAP_DVFS_WDATA3] = 0x104,
-+ [PWRAP_DVFS_ADR4] = 0x108,
-+ [PWRAP_DVFS_WDATA4] = 0x10C,
-+ [PWRAP_DVFS_ADR5] = 0x110,
-+ [PWRAP_DVFS_WDATA5] = 0x114,
-+ [PWRAP_DVFS_ADR6] = 0x118,
-+ [PWRAP_DVFS_WDATA6] = 0x11C,
-+ [PWRAP_DVFS_ADR7] = 0x120,
-+ [PWRAP_DVFS_WDATA7] = 0x124,
-+ [PWRAP_DVFS_ADR8] = 0x128,
-+ [PWRAP_DVFS_WDATA8] = 0x12C,
-+ [PWRAP_DVFS_ADR9] = 0x130,
-+ [PWRAP_DVFS_WDATA9] = 0x134,
-+ [PWRAP_DVFS_ADR10] = 0x138,
-+ [PWRAP_DVFS_WDATA10] = 0x13C,
-+ [PWRAP_DVFS_ADR11] = 0x140,
-+ [PWRAP_DVFS_WDATA11] = 0x144,
-+ [PWRAP_DVFS_ADR12] = 0x148,
-+ [PWRAP_DVFS_WDATA12] = 0x14C,
-+ [PWRAP_DVFS_ADR13] = 0x150,
-+ [PWRAP_DVFS_WDATA13] = 0x154,
-+ [PWRAP_DVFS_ADR14] = 0x158,
-+ [PWRAP_DVFS_WDATA14] = 0x15C,
-+ [PWRAP_DVFS_ADR15] = 0x160,
-+ [PWRAP_DVFS_WDATA15] = 0x164,
-+ [PWRAP_SPMINF_STA] = 0x168,
-+ [PWRAP_CIPHER_KEY_SEL] = 0x16C,
-+ [PWRAP_CIPHER_IV_SEL] = 0x170,
-+ [PWRAP_CIPHER_EN] = 0x174,
-+ [PWRAP_CIPHER_RDY] = 0x178,
-+ [PWRAP_CIPHER_MODE] = 0x17C,
-+ [PWRAP_CIPHER_SWRST] = 0x180,
-+ [PWRAP_DCM_EN] = 0x184,
-+ [PWRAP_DCM_DBC_PRD] = 0x188,
-+ [PWRAP_EXT_CK] = 0x18C,
-+ [PWRAP_ADC_CMD_ADDR] = 0x190,
-+ [PWRAP_PWRAP_ADC_CMD] = 0x194,
-+ [PWRAP_ADC_RDATA_ADDR] = 0x198,
-+ [PWRAP_GPS_STA] = 0x19C,
-+ [PWRAP_SW_RST] = 0x1A0,
-+ [PWRAP_DVFS_STEP_CTRL0] = 0x238,
-+ [PWRAP_DVFS_STEP_CTRL1] = 0x23C,
-+ [PWRAP_DVFS_STEP_CTRL2] = 0x240,
-+ [PWRAP_SPI2_CTRL] = 0x244,
-+};
-+
- static int mt8173_regs[] = {
- [PWRAP_MUX_SEL] = 0x0,
- [PWRAP_WRAP_EN] = 0x4,
-@@ -499,6 +641,7 @@ enum pmic_type {
-
- enum pwrap_type {
- PWRAP_MT2701,
-+ PWRAP_MT7622,
- PWRAP_MT8135,
- PWRAP_MT8173,
- };
-@@ -927,6 +1070,9 @@ static int pwrap_init_cipher(struct pmic
- case PWRAP_MT8173:
- pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
- break;
-+ case PWRAP_MT7622:
-+ pwrap_writel(wrp, 0, PWRAP_CIPHER_EN);
-+ break;
- }
-
- /* Config cipher mode @PMIC */
-@@ -1071,6 +1217,15 @@ static int pwrap_mt2701_init_soc_specifi
- return 0;
- }
-
-+static int pwrap_mt7622_init_soc_specific(struct pmic_wrapper *wrp)
-+{
-+ pwrap_writel(wrp, 0, PWRAP_STAUPD_PRD);
-+ /* enable 2wire SPI master */
-+ pwrap_writel(wrp, 0x8000000, PWRAP_SPI2_CTRL);
-+
-+ return 0;
-+}
-+
- static int pwrap_init(struct pmic_wrapper *wrp)
- {
- int ret;
-@@ -1242,6 +1397,18 @@ static const struct pmic_wrapper_type pw
- .init_soc_specific = pwrap_mt2701_init_soc_specific,
- };
-
-+static const struct pmic_wrapper_type pwrap_mt7622 = {
-+ .regs = mt7622_regs,
-+ .type = PWRAP_MT7622,
-+ .arb_en_all = 0xff,
-+ .int_en_all = ~(u32)BIT(31),
-+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
-+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
-+ .has_bridge = 0,
-+ .init_reg_clock = pwrap_common_init_reg_clock,
-+ .init_soc_specific = pwrap_mt7622_init_soc_specific,
-+};
-+
- static const struct pmic_wrapper_type pwrap_mt8135 = {
- .regs = mt8135_regs,
- .type = PWRAP_MT8135,
-@@ -1271,6 +1438,9 @@ static const struct of_device_id of_pwra
- .compatible = "mediatek,mt2701-pwrap",
- .data = &pwrap_mt2701,
- }, {
-+ .compatible = "mediatek,mt7622-pwrap",
-+ .data = &pwrap_mt7622,
-+ }, {
- .compatible = "mediatek,mt8135-pwrap",
- .data = &pwrap_mt8135,
- }, {
diff --git a/target/linux/mediatek/patches-4.14/0123-soc-mediatek-place-Kconfig-for-all-SoC-drivers-under.patch b/target/linux/mediatek/patches-4.14/0123-soc-mediatek-place-Kconfig-for-all-SoC-drivers-under.patch
deleted file mode 100644
index 26a9eceaba..0000000000
--- a/target/linux/mediatek/patches-4.14/0123-soc-mediatek-place-Kconfig-for-all-SoC-drivers-under.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 21501b17e017cb10f1a64a73e62e3e2e91a52efa Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 5 Oct 2017 11:17:49 +0800
-Subject: [PATCH 123/224] soc: mediatek: place Kconfig for all SoC drivers
- under menu
-
-Add cleanup for placing all Kconfig for all MediaTek SoC drivers under
-the independent menu as other SoCs vendor usually did. Since the menu
-would be shown depending on "ARCH_MEDIATEK || COMPILE_TEST" selected and
-MTK_PMIC_WRAP is still safe compiling with the case of "COMPILE_TEST"
-only, the superfluous dependency for those items under the menu also is
-also being removed for the sake of simplicity.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Jean Delvare <jdelvare@suse.de>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/soc/mediatek/Kconfig | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/soc/mediatek/Kconfig
-+++ b/drivers/soc/mediatek/Kconfig
-@@ -1,9 +1,11 @@
- #
- # MediaTek SoC drivers
- #
-+menu "MediaTek SoC drivers"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+
- config MTK_INFRACFG
- bool "MediaTek INFRACFG Support"
-- depends on ARCH_MEDIATEK || COMPILE_TEST
- select REGMAP
- help
- Say yes here to add support for the MediaTek INFRACFG controller. The
-@@ -12,7 +14,6 @@ config MTK_INFRACFG
-
- config MTK_PMIC_WRAP
- tristate "MediaTek PMIC Wrapper Support"
-- depends on ARCH_MEDIATEK
- depends on RESET_CONTROLLER
- select REGMAP
- help
-@@ -22,7 +23,6 @@ config MTK_PMIC_WRAP
-
- config MTK_SCPSYS
- bool "MediaTek SCPSYS Support"
-- depends on ARCH_MEDIATEK || COMPILE_TEST
- default ARCH_MEDIATEK
- select REGMAP
- select MTK_INFRACFG
-@@ -30,3 +30,5 @@ config MTK_SCPSYS
- help
- Say yes here to add support for the MediaTek SCPSYS power domain
- driver.
-+
-+endmenu
diff --git a/target/linux/mediatek/patches-4.14/0124-arm64-mediatek-cleanup-message-for-platform-selectio.patch b/target/linux/mediatek/patches-4.14/0124-arm64-mediatek-cleanup-message-for-platform-selectio.patch
deleted file mode 100644
index 6af0ae8316..0000000000
--- a/target/linux/mediatek/patches-4.14/0124-arm64-mediatek-cleanup-message-for-platform-selectio.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From f9bea440dd8dbf1eda8644e4b1d76503053f17b6 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 19 Oct 2017 17:52:54 +0800
-Subject: [PATCH 124/224] arm64: mediatek: cleanup message for platform
- selection
-
-The latest kernel tree already can support more MediaTek platforms such as
-MT2712 and MT7622, so additional descriptions for those platforms are added
-and certain cleanups are also being made here.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/Kconfig.platforms | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -91,12 +91,13 @@ config ARCH_HISI
- This enables support for Hisilicon ARMv8 SoC family
-
- config ARCH_MEDIATEK
-- bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
-+ bool "MediaTek SoC Family"
- select ARM_GIC
- select PINCTRL
- select MTK_TIMER
- help
-- Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
-+ This enables support for MediaTek MT27xx, MT65xx, MT76xx
-+ & MT81xx ARMv8 SoCs
-
- config ARCH_MESON
- bool "Amlogic Platforms"
diff --git a/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch b/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch
deleted file mode 100644
index 9b651925c9..0000000000
--- a/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From d42ebed1aa669c5a897ec0aa5e1ede8d9069894a Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Thu, 21 Sep 2017 18:31:49 +0800
-Subject: [PATCH 125/224] phy: phy-mtk-tphy: add set_mode callback
-
-This is used to force PHY with USB OTG function to enter a specific
-mode, and override OTG IDPIN(or IDDIG) signal.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/mediatek/phy-mtk-tphy.c | 39 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/drivers/phy/mediatek/phy-mtk-tphy.c
-+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
-@@ -96,9 +96,11 @@
-
- #define U3P_U2PHYDTM1 0x06C
- #define P2C_RG_UART_EN BIT(16)
-+#define P2C_FORCE_IDDIG BIT(9)
- #define P2C_RG_VBUSVALID BIT(5)
- #define P2C_RG_SESSEND BIT(4)
- #define P2C_RG_AVALID BIT(2)
-+#define P2C_RG_IDDIG BIT(1)
-
- #define U3P_U3_CHIP_GPIO_CTLD 0x0c
- #define P3C_REG_IP_SW_RST BIT(31)
-@@ -580,6 +582,31 @@ static void u2_phy_instance_exit(struct
- }
- }
-
-+static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
-+ struct mtk_phy_instance *instance,
-+ enum phy_mode mode)
-+{
-+ struct u2phy_banks *u2_banks = &instance->u2_banks;
-+ u32 tmp;
-+
-+ tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
-+ switch (mode) {
-+ case PHY_MODE_USB_DEVICE:
-+ tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
-+ break;
-+ case PHY_MODE_USB_HOST:
-+ tmp |= P2C_FORCE_IDDIG;
-+ tmp &= ~P2C_RG_IDDIG;
-+ break;
-+ case PHY_MODE_USB_OTG:
-+ tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG);
-+ break;
-+ default:
-+ return;
-+ }
-+ writel(tmp, u2_banks->com + U3P_U2PHYDTM1);
-+}
-+
- static void pcie_phy_instance_init(struct mtk_tphy *tphy,
- struct mtk_phy_instance *instance)
- {
-@@ -876,6 +903,17 @@ static int mtk_phy_exit(struct phy *phy)
- return 0;
- }
-
-+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
-+{
-+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
-+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
-+
-+ if (instance->type == PHY_TYPE_USB2)
-+ u2_phy_instance_set_mode(tphy, instance, mode);
-+
-+ return 0;
-+}
-+
- static struct phy *mtk_phy_xlate(struct device *dev,
- struct of_phandle_args *args)
- {
-@@ -926,6 +964,7 @@ static const struct phy_ops mtk_tphy_ops
- .exit = mtk_phy_exit,
- .power_on = mtk_phy_power_on,
- .power_off = mtk_phy_power_off,
-+ .set_mode = mtk_phy_set_mode,
- .owner = THIS_MODULE,
- };
-
diff --git a/target/linux/mediatek/patches-4.14/0126-usb-xhci-mtk-use-dma_set_mask_and_coherent-in-probe-.patch b/target/linux/mediatek/patches-4.14/0126-usb-xhci-mtk-use-dma_set_mask_and_coherent-in-probe-.patch
deleted file mode 100644
index 26c7515943..0000000000
--- a/target/linux/mediatek/patches-4.14/0126-usb-xhci-mtk-use-dma_set_mask_and_coherent-in-probe-.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 9f617ce19c5dab429a539d411204ae220b5b8cd6 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:33 +0800
-Subject: [PATCH 126/224] usb: xhci-mtk: use dma_set_mask_and_coherent() in
- probe function
-
-This patch uses the simpler dma_set_mask_and_coherent() instead of
-doing these as separate steps
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -606,15 +606,10 @@ static int xhci_mtk_probe(struct platfor
- }
-
- /* Initialize dma_mask and coherent_dma_mask to 32-bits */
-- ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret)
- goto disable_clk;
-
-- if (!dev->dma_mask)
-- dev->dma_mask = &dev->coherent_dma_mask;
-- else
-- dma_set_mask(dev, DMA_BIT_MASK(32));
--
- hcd = usb_create_hcd(driver, dev, dev_name(dev));
- if (!hcd) {
- ret = -ENOMEM;
diff --git a/target/linux/mediatek/patches-4.14/0127-usb-xhci-mtk-use-ports-count-from-xhci-in-xhci_mtk_s.patch b/target/linux/mediatek/patches-4.14/0127-usb-xhci-mtk-use-ports-count-from-xhci-in-xhci_mtk_s.patch
deleted file mode 100644
index f17da7003f..0000000000
--- a/target/linux/mediatek/patches-4.14/0127-usb-xhci-mtk-use-ports-count-from-xhci-in-xhci_mtk_s.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From f97aa71fe34135e7fc8da6231e61ee06f79d739d Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:34 +0800
-Subject: [PATCH 127/224] usb: xhci-mtk: use ports count from xhci in
- xhci_mtk_sch_init()
-
-Make use of ports count from xhci but not from ippc in
-xhci_mtk_sch_init()
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk-sch.c | 3 ++-
- drivers/usb/host/xhci-mtk.c | 3 ---
- 2 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk-sch.c
-+++ b/drivers/usb/host/xhci-mtk-sch.c
-@@ -289,12 +289,13 @@ static bool need_bw_sch(struct usb_host_
-
- int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
- {
-+ struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
- struct mu3h_sch_bw_info *sch_array;
- int num_usb_bus;
- int i;
-
- /* ss IN and OUT are separated */
-- num_usb_bus = mtk->num_u3_ports * 2 + mtk->num_u2_ports;
-+ num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports;
-
- sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL);
- if (sch_array == NULL)
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -492,7 +492,6 @@ static void xhci_mtk_quirks(struct devic
- /* called during probe() after chip reset completes */
- static int xhci_mtk_setup(struct usb_hcd *hcd)
- {
-- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
- int ret;
-
-@@ -507,8 +506,6 @@ static int xhci_mtk_setup(struct usb_hcd
- return ret;
-
- if (usb_hcd_is_primary_hcd(hcd)) {
-- mtk->num_u3_ports = xhci->num_usb3_ports;
-- mtk->num_u2_ports = xhci->num_usb2_ports;
- ret = xhci_mtk_sch_init(mtk);
- if (ret)
- return ret;
diff --git a/target/linux/mediatek/patches-4.14/0128-usb-xhci-mtk-check-clock-stability-of-U3_MAC.patch b/target/linux/mediatek/patches-4.14/0128-usb-xhci-mtk-check-clock-stability-of-U3_MAC.patch
deleted file mode 100644
index ebd0ea10dd..0000000000
--- a/target/linux/mediatek/patches-4.14/0128-usb-xhci-mtk-check-clock-stability-of-U3_MAC.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 4422c4efeed2a8b9fa745c6e529623d89c0be75e Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:35 +0800
-Subject: [PATCH 128/224] usb: xhci-mtk: check clock stability of U3_MAC
-
-This is useful to find out the root cause when the Super Speed doesn't
-work. Such as when the T-PHY is switched to PCIe or SATA, and affects
-Super Speed function, the check will fail.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -43,6 +43,7 @@
-
- /* ip_pw_sts1 register */
- #define STS1_IP_SLEEP_STS BIT(30)
-+#define STS1_U3_MAC_RST BIT(16)
- #define STS1_XHCI_RST BIT(11)
- #define STS1_SYS125_RST BIT(10)
- #define STS1_REF_RST BIT(8)
-@@ -125,6 +126,9 @@ static int xhci_mtk_host_enable(struct x
- check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
- STS1_SYS125_RST | STS1_XHCI_RST;
-
-+ if (mtk->num_u3_ports)
-+ check_val |= STS1_U3_MAC_RST;
-+
- ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
- (check_val == (value & check_val)), 100, 20000);
- if (ret) {
diff --git a/target/linux/mediatek/patches-4.14/0129-usb-xhci-mtk-support-option-to-disable-usb3-ports.patch b/target/linux/mediatek/patches-4.14/0129-usb-xhci-mtk-support-option-to-disable-usb3-ports.patch
deleted file mode 100644
index d5e48c7d01..0000000000
--- a/target/linux/mediatek/patches-4.14/0129-usb-xhci-mtk-support-option-to-disable-usb3-ports.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 13a1b2e927893cbb046a1ec5a55ec3516873a3f6 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:36 +0800
-Subject: [PATCH 129/224] usb: xhci-mtk: support option to disable usb3 ports
-
-Add support to disable specific usb3 ports, it's useful when
-usb3 phy is shared with PCIe or SATA, because we should disable
-the corresponding usb3 port if the phy is used by PCIe or SATA.
-Sometimes it's helpful to analyse and solve problems.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 18 +++++++++++++++---
- drivers/usb/host/xhci-mtk.h | 1 +
- 2 files changed, 16 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -92,6 +92,7 @@ static int xhci_mtk_host_enable(struct x
- {
- struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
- u32 value, check_val;
-+ int u3_ports_disabed = 0;
- int ret;
- int i;
-
-@@ -103,8 +104,13 @@ static int xhci_mtk_host_enable(struct x
- value &= ~CTRL1_IP_HOST_PDN;
- writel(value, &ippc->ip_pw_ctr1);
-
-- /* power on and enable all u3 ports */
-+ /* power on and enable u3 ports except skipped ones */
- for (i = 0; i < mtk->num_u3_ports; i++) {
-+ if ((0x1 << i) & mtk->u3p_dis_msk) {
-+ u3_ports_disabed++;
-+ continue;
-+ }
-+
- value = readl(&ippc->u3_ctrl_p[i]);
- value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
- value |= CTRL_U3_PORT_HOST_SEL;
-@@ -126,7 +132,7 @@ static int xhci_mtk_host_enable(struct x
- check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
- STS1_SYS125_RST | STS1_XHCI_RST;
-
-- if (mtk->num_u3_ports)
-+ if (mtk->num_u3_ports > u3_ports_disabed)
- check_val |= STS1_U3_MAC_RST;
-
- ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
-@@ -149,8 +155,11 @@ static int xhci_mtk_host_disable(struct
- if (!mtk->has_ippc)
- return 0;
-
-- /* power down all u3 ports */
-+ /* power down u3 ports except skipped ones */
- for (i = 0; i < mtk->num_u3_ports; i++) {
-+ if ((0x1 << i) & mtk->u3p_dis_msk)
-+ continue;
-+
- value = readl(&ippc->u3_ctrl_p[i]);
- value |= CTRL_U3_PORT_PDN;
- writel(value, &ippc->u3_ctrl_p[i]);
-@@ -573,6 +582,9 @@ static int xhci_mtk_probe(struct platfor
- }
-
- mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
-+ /* optional property, ignore the error if it does not exist */
-+ of_property_read_u32(node, "mediatek,u3p-dis-msk",
-+ &mtk->u3p_dis_msk);
-
- ret = usb_wakeup_of_property_parse(mtk, node);
- if (ret)
---- a/drivers/usb/host/xhci-mtk.h
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -121,6 +121,7 @@ struct xhci_hcd_mtk {
- bool has_ippc;
- int num_u2_ports;
- int num_u3_ports;
-+ int u3p_dis_msk;
- struct regulator *vusb33;
- struct regulator *vbus;
- struct clk *sys_clk; /* sys and mac clock */
diff --git a/target/linux/mediatek/patches-4.14/0130-usb-xhci-mtk-remove-dummy-wakeup-debounce-clocks.patch b/target/linux/mediatek/patches-4.14/0130-usb-xhci-mtk-remove-dummy-wakeup-debounce-clocks.patch
deleted file mode 100644
index 85ee07baae..0000000000
--- a/target/linux/mediatek/patches-4.14/0130-usb-xhci-mtk-remove-dummy-wakeup-debounce-clocks.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 25adaf94e0fcbf6c1b47cb610edb7f5c23c53139 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:37 +0800
-Subject: [PATCH 130/224] usb: xhci-mtk: remove dummy wakeup debounce clocks
-
-The wakeup debounce clocks for each ports in fact are not
-needed, so remove them.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 33 ---------------------------------
- drivers/usb/host/xhci-mtk.h | 2 --
- 2 files changed, 35 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -237,25 +237,8 @@ static int xhci_mtk_clks_enable(struct x
- goto sys_clk_err;
- }
-
-- if (mtk->wakeup_src) {
-- ret = clk_prepare_enable(mtk->wk_deb_p0);
-- if (ret) {
-- dev_err(mtk->dev, "failed to enable wk_deb_p0\n");
-- goto usb_p0_err;
-- }
--
-- ret = clk_prepare_enable(mtk->wk_deb_p1);
-- if (ret) {
-- dev_err(mtk->dev, "failed to enable wk_deb_p1\n");
-- goto usb_p1_err;
-- }
-- }
- return 0;
-
--usb_p1_err:
-- clk_disable_unprepare(mtk->wk_deb_p0);
--usb_p0_err:
-- clk_disable_unprepare(mtk->sys_clk);
- sys_clk_err:
- clk_disable_unprepare(mtk->ref_clk);
- ref_clk_err:
-@@ -264,10 +247,6 @@ ref_clk_err:
-
- static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
- {
-- if (mtk->wakeup_src) {
-- clk_disable_unprepare(mtk->wk_deb_p1);
-- clk_disable_unprepare(mtk->wk_deb_p0);
-- }
- clk_disable_unprepare(mtk->sys_clk);
- clk_disable_unprepare(mtk->ref_clk);
- }
-@@ -371,18 +350,6 @@ static int usb_wakeup_of_property_parse(
- if (!mtk->wakeup_src)
- return 0;
-
-- mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
-- if (IS_ERR(mtk->wk_deb_p0)) {
-- dev_err(dev, "fail to get wakeup_deb_p0\n");
-- return PTR_ERR(mtk->wk_deb_p0);
-- }
--
-- mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
-- if (IS_ERR(mtk->wk_deb_p1)) {
-- dev_err(dev, "fail to get wakeup_deb_p1\n");
-- return PTR_ERR(mtk->wk_deb_p1);
-- }
--
- mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
- "mediatek,syscon-wakeup");
- if (IS_ERR(mtk->pericfg)) {
---- a/drivers/usb/host/xhci-mtk.h
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -126,8 +126,6 @@ struct xhci_hcd_mtk {
- struct regulator *vbus;
- struct clk *sys_clk; /* sys and mac clock */
- struct clk *ref_clk;
-- struct clk *wk_deb_p0; /* port0's wakeup debounce clock */
-- struct clk *wk_deb_p1;
- struct regmap *pericfg;
- struct phy **phys;
- int num_phys;
diff --git a/target/linux/mediatek/patches-4.14/0131-usb-xhci-mtk-add-optional-mcu-and-dma-bus-clocks.patch b/target/linux/mediatek/patches-4.14/0131-usb-xhci-mtk-add-optional-mcu-and-dma-bus-clocks.patch
deleted file mode 100644
index 264cd25e7f..0000000000
--- a/target/linux/mediatek/patches-4.14/0131-usb-xhci-mtk-add-optional-mcu-and-dma-bus-clocks.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From 9dce908d64ffb8b0ab71cb3a4b79db398d2e6dc3 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:38 +0800
-Subject: [PATCH 131/224] usb: xhci-mtk: add optional mcu and dma bus clocks
-
-There are mcu_bus and dma_bus clocks needed to be controlled by
-driver on some SoCs, so add them as optional ones
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 79 ++++++++++++++++++++++++++++++++++-----------
- drivers/usb/host/xhci-mtk.h | 2 ++
- 2 files changed, 62 insertions(+), 19 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -221,6 +221,44 @@ static int xhci_mtk_ssusb_config(struct
- return xhci_mtk_host_enable(mtk);
- }
-
-+/* ignore the error if the clock does not exist */
-+static struct clk *optional_clk_get(struct device *dev, const char *id)
-+{
-+ struct clk *opt_clk;
-+
-+ opt_clk = devm_clk_get(dev, id);
-+ /* ignore error number except EPROBE_DEFER */
-+ if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
-+ opt_clk = NULL;
-+
-+ return opt_clk;
-+}
-+
-+static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
-+{
-+ struct device *dev = mtk->dev;
-+
-+ mtk->sys_clk = devm_clk_get(dev, "sys_ck");
-+ if (IS_ERR(mtk->sys_clk)) {
-+ dev_err(dev, "fail to get sys_ck\n");
-+ return PTR_ERR(mtk->sys_clk);
-+ }
-+
-+ mtk->ref_clk = optional_clk_get(dev, "ref_ck");
-+ if (IS_ERR(mtk->ref_clk))
-+ return PTR_ERR(mtk->ref_clk);
-+
-+ mtk->mcu_clk = optional_clk_get(dev, "mcu_ck");
-+ if (IS_ERR(mtk->mcu_clk))
-+ return PTR_ERR(mtk->mcu_clk);
-+
-+ mtk->dma_clk = optional_clk_get(dev, "dma_ck");
-+ if (IS_ERR(mtk->dma_clk))
-+ return PTR_ERR(mtk->dma_clk);
-+
-+ return 0;
-+}
-+
- static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
- {
- int ret;
-@@ -237,16 +275,34 @@ static int xhci_mtk_clks_enable(struct x
- goto sys_clk_err;
- }
-
-+ ret = clk_prepare_enable(mtk->mcu_clk);
-+ if (ret) {
-+ dev_err(mtk->dev, "failed to enable mcu_clk\n");
-+ goto mcu_clk_err;
-+ }
-+
-+ ret = clk_prepare_enable(mtk->dma_clk);
-+ if (ret) {
-+ dev_err(mtk->dev, "failed to enable dma_clk\n");
-+ goto dma_clk_err;
-+ }
-+
- return 0;
-
-+dma_clk_err:
-+ clk_disable_unprepare(mtk->mcu_clk);
-+mcu_clk_err:
-+ clk_disable_unprepare(mtk->sys_clk);
- sys_clk_err:
- clk_disable_unprepare(mtk->ref_clk);
- ref_clk_err:
-- return -EINVAL;
-+ return ret;
- }
-
- static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
- {
-+ clk_disable_unprepare(mtk->dma_clk);
-+ clk_disable_unprepare(mtk->mcu_clk);
- clk_disable_unprepare(mtk->sys_clk);
- clk_disable_unprepare(mtk->ref_clk);
- }
-@@ -529,24 +585,9 @@ static int xhci_mtk_probe(struct platfor
- return PTR_ERR(mtk->vusb33);
- }
-
-- mtk->sys_clk = devm_clk_get(dev, "sys_ck");
-- if (IS_ERR(mtk->sys_clk)) {
-- dev_err(dev, "fail to get sys_ck\n");
-- return PTR_ERR(mtk->sys_clk);
-- }
--
-- /*
-- * reference clock is usually a "fixed-clock", make it optional
-- * for backward compatibility and ignore the error if it does
-- * not exist.
-- */
-- mtk->ref_clk = devm_clk_get(dev, "ref_ck");
-- if (IS_ERR(mtk->ref_clk)) {
-- if (PTR_ERR(mtk->ref_clk) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- mtk->ref_clk = NULL;
-- }
-+ ret = xhci_mtk_clks_get(mtk);
-+ if (ret)
-+ return ret;
-
- mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
- /* optional property, ignore the error if it does not exist */
---- a/drivers/usb/host/xhci-mtk.h
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -126,6 +126,8 @@ struct xhci_hcd_mtk {
- struct regulator *vbus;
- struct clk *sys_clk; /* sys and mac clock */
- struct clk *ref_clk;
-+ struct clk *mcu_clk;
-+ struct clk *dma_clk;
- struct regmap *pericfg;
- struct phy **phys;
- int num_phys;
diff --git a/target/linux/mediatek/patches-4.14/0132-usb-host-modify-description-for-MTK-xHCI-config.patch b/target/linux/mediatek/patches-4.14/0132-usb-host-modify-description-for-MTK-xHCI-config.patch
deleted file mode 100644
index e62a3e39dd..0000000000
--- a/target/linux/mediatek/patches-4.14/0132-usb-host-modify-description-for-MTK-xHCI-config.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From d975bd8976c4d19fbfbaafe269dd466e281a2e3e Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:39 +0800
-Subject: [PATCH 132/224] usb: host: modify description for MTK xHCI config
-
-Due to all MediaTek SoCs with xHCI host controller use this
-driver, remove limitation for specific SoCs
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -45,12 +45,12 @@ config USB_XHCI_PLATFORM
- If unsure, say N.
-
- config USB_XHCI_MTK
-- tristate "xHCI support for Mediatek MT65xx/MT7621"
-+ tristate "xHCI support for MediaTek SoCs"
- select MFD_SYSCON
- depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
- ---help---
- Say 'Y' to enable the support for the xHCI host controller
-- found in Mediatek MT65xx SoCs.
-+ found in MediaTek SoCs.
- If unsure, say N.
-
- config USB_XHCI_MVEBU
diff --git a/target/linux/mediatek/patches-4.14/0133-dt-bindings-usb-mtk-xhci-add-a-optional-property-to-.patch b/target/linux/mediatek/patches-4.14/0133-dt-bindings-usb-mtk-xhci-add-a-optional-property-to-.patch
deleted file mode 100644
index 5124bbaa48..0000000000
--- a/target/linux/mediatek/patches-4.14/0133-dt-bindings-usb-mtk-xhci-add-a-optional-property-to-.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 3a2dce7d84793ec60cff173e17e3669acaade8c9 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:40 +0800
-Subject: [PATCH 133/224] dt-bindings: usb: mtk-xhci: add a optional property
- to disable u3ports
-
-Add a new optional property to disable u3ports
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-@@ -38,6 +38,8 @@ Optional properties:
- mode;
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
- control register, it depends on "mediatek,wakeup-src".
-+ - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-+ bit1 for u3port1, ... etc;
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
- - pinctrl-names : a pinctrl state named "default" must be defined
diff --git a/target/linux/mediatek/patches-4.14/0134-dt-bindings-usb-mtk-xhci-remove-dummy-clocks-and-add.patch b/target/linux/mediatek/patches-4.14/0134-dt-bindings-usb-mtk-xhci-remove-dummy-clocks-and-add.patch
deleted file mode 100644
index 24fd1260ee..0000000000
--- a/target/linux/mediatek/patches-4.14/0134-dt-bindings-usb-mtk-xhci-remove-dummy-clocks-and-add.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From a96468412cac8abd66667c322fbcda756cc3abc9 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 16:26:41 +0800
-Subject: [PATCH 134/224] dt-bindings: usb: mtk-xhci: remove dummy clocks and
- add optional ones
-
-Remove dummy clocks for usb wakeup and add optional ones for
-MCU_BUS_CK and DMA_BUS_CK.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- .../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 18 ++++++++----------
- 1 file changed, 8 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-@@ -26,10 +26,11 @@ Required properties:
- - clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
- - clock-names : must contain
-- "sys_ck": for clock of xHCI MAC
-- "ref_ck": for reference clock of xHCI MAC
-- "wakeup_deb_p0": for USB wakeup debounce clock of port0
-- "wakeup_deb_p1": for USB wakeup debounce clock of port1
-+ "sys_ck": controller clock used by normal mode,
-+ the following ones are optional:
-+ "ref_ck": reference clock used by low power mode etc,
-+ "mcu_ck": mcu_bus clock for register access,
-+ "dma_ck": dma_bus clock for data transfer by DMA
-
- - phys : a list of phandle + phy specifier pairs
-
-@@ -57,9 +58,7 @@ usb30: usb@11270000 {
- clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
- <&pericfg CLK_PERI_USB0>,
- <&pericfg CLK_PERI_USB1>;
-- clock-names = "sys_ck", "ref_ck",
-- "wakeup_deb_p0",
-- "wakeup_deb_p1";
-+ clock-names = "sys_ck", "ref_ck";
- phys = <&phy_port0 PHY_TYPE_USB3>,
- <&phy_port1 PHY_TYPE_USB2>;
- vusb33-supply = <&mt6397_vusb_reg>;
-@@ -91,9 +90,8 @@ Required properties:
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
-- - clock-names : must be
-- "sys_ck": for clock of xHCI MAC
-- "ref_ck": for reference clock of xHCI MAC
-+ - clock-names : must contain "sys_ck", and the following ones are optional:
-+ "ref_ck", "mcu_ck" and "dma_ck"
-
- Optional properties:
- - vbus-supply : reference to the VBUS regulator;
diff --git a/target/linux/mediatek/patches-4.14/0135-dt-bindings-mtd-add-new-compatible-strings-and-impro.patch b/target/linux/mediatek/patches-4.14/0135-dt-bindings-mtd-add-new-compatible-strings-and-impro.patch
deleted file mode 100644
index 53b33fa5ac..0000000000
--- a/target/linux/mediatek/patches-4.14/0135-dt-bindings-mtd-add-new-compatible-strings-and-impro.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 2af9a8582cb28e786a8cbd913f41e6db9adcf3dc Mon Sep 17 00:00:00 2001
-From: Guochun Mao <guochun.mao@mediatek.com>
-Date: Thu, 21 Sep 2017 20:45:05 +0800
-Subject: [PATCH 135/224] dt-bindings: mtd: add new compatible strings and
- improve description
-
-Add "mediatak,mt2712-nor" and "mediatek,mt7622-nor"
-for nor flash node's compatible strings.
-Explicate the fallback compatible.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
----
- Documentation/devicetree/bindings/mtd/mtk-quadspi.txt | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
-+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
-@@ -1,13 +1,16 @@
- * Serial NOR flash controller for MTK MT81xx (and similar)
-
- Required properties:
--- compatible: The possible values are:
-- "mediatek,mt2701-nor"
-- "mediatek,mt7623-nor"
-+- compatible: For mt8173, compatible should be "mediatek,mt8173-nor",
-+ and it's the fallback compatible for other Soc.
-+ For every other SoC, should contain both the SoC-specific compatible
-+ string and "mediatek,mt8173-nor".
-+ The possible values are:
-+ "mediatek,mt2701-nor", "mediatek,mt8173-nor"
-+ "mediatek,mt2712-nor", "mediatek,mt8173-nor"
-+ "mediatek,mt7622-nor", "mediatek,mt8173-nor"
-+ "mediatek,mt7623-nor", "mediatek,mt8173-nor"
- "mediatek,mt8173-nor"
-- For mt8173, compatible should be "mediatek,mt8173-nor".
-- For every other SoC, should contain both the SoC-specific compatible string
-- and "mediatek,mt8173-nor".
- - reg: physical base address and length of the controller's register
- - clocks: the phandle of the clocks needed by the nor controller
- - clock-names: the names of the clocks
diff --git a/target/linux/mediatek/patches-4.14/0136-mtd-mtk-nor-add-suspend-resume-support.patch b/target/linux/mediatek/patches-4.14/0136-mtd-mtk-nor-add-suspend-resume-support.patch
deleted file mode 100644
index 8bfba8953d..0000000000
--- a/target/linux/mediatek/patches-4.14/0136-mtd-mtk-nor-add-suspend-resume-support.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 8947f8cd407a55db816cd03fc03b59096210978e Mon Sep 17 00:00:00 2001
-From: Guochun Mao <guochun.mao@mediatek.com>
-Date: Thu, 21 Sep 2017 20:45:06 +0800
-Subject: [PATCH 136/224] mtd: mtk-nor: add suspend/resume support
-
-Abstract functions of clock setting, to avoid duplicated code,
-these functions been used in new feature.
-Implement suspend/resume functions.
-
-Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
----
- drivers/mtd/spi-nor/mtk-quadspi.c | 70 ++++++++++++++++++++++++++++++++-------
- 1 file changed, 58 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/spi-nor/mtk-quadspi.c
-+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
-@@ -404,6 +404,29 @@ static int mt8173_nor_write_reg(struct s
- return ret;
- }
-
-+static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor)
-+{
-+ clk_disable_unprepare(mt8173_nor->spi_clk);
-+ clk_disable_unprepare(mt8173_nor->nor_clk);
-+}
-+
-+static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor)
-+{
-+ int ret;
-+
-+ ret = clk_prepare_enable(mt8173_nor->spi_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(mt8173_nor->nor_clk);
-+ if (ret) {
-+ clk_disable_unprepare(mt8173_nor->spi_clk);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
- static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
- struct device_node *flash_node)
- {
-@@ -468,15 +491,11 @@ static int mtk_nor_drv_probe(struct plat
- return PTR_ERR(mt8173_nor->nor_clk);
-
- mt8173_nor->dev = &pdev->dev;
-- ret = clk_prepare_enable(mt8173_nor->spi_clk);
-+
-+ ret = mt8173_nor_enable_clk(mt8173_nor);
- if (ret)
- return ret;
-
-- ret = clk_prepare_enable(mt8173_nor->nor_clk);
-- if (ret) {
-- clk_disable_unprepare(mt8173_nor->spi_clk);
-- return ret;
-- }
- /* only support one attached flash */
- flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
- if (!flash_np) {
-@@ -487,10 +506,9 @@ static int mtk_nor_drv_probe(struct plat
- ret = mtk_nor_init(mt8173_nor, flash_np);
-
- nor_free:
-- if (ret) {
-- clk_disable_unprepare(mt8173_nor->spi_clk);
-- clk_disable_unprepare(mt8173_nor->nor_clk);
-- }
-+ if (ret)
-+ mt8173_nor_disable_clk(mt8173_nor);
-+
- return ret;
- }
-
-@@ -498,11 +516,38 @@ static int mtk_nor_drv_remove(struct pla
- {
- struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
-
-- clk_disable_unprepare(mt8173_nor->spi_clk);
-- clk_disable_unprepare(mt8173_nor->nor_clk);
-+ mt8173_nor_disable_clk(mt8173_nor);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int mtk_nor_suspend(struct device *dev)
-+{
-+ struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
-+
-+ mt8173_nor_disable_clk(mt8173_nor);
-+
- return 0;
- }
-
-+static int mtk_nor_resume(struct device *dev)
-+{
-+ struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
-+
-+ return mt8173_nor_enable_clk(mt8173_nor);
-+}
-+
-+static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
-+ .suspend = mtk_nor_suspend,
-+ .resume = mtk_nor_resume,
-+};
-+
-+#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops)
-+#else
-+#define MTK_NOR_DEV_PM_OPS NULL
-+#endif
-+
- static const struct of_device_id mtk_nor_of_ids[] = {
- { .compatible = "mediatek,mt8173-nor"},
- { /* sentinel */ }
-@@ -514,6 +559,7 @@ static struct platform_driver mtk_nor_dr
- .remove = mtk_nor_drv_remove,
- .driver = {
- .name = "mtk-nor",
-+ .pm = MTK_NOR_DEV_PM_OPS,
- .of_match_table = mtk_nor_of_ids,
- },
- };
diff --git a/target/linux/mediatek/patches-4.14/0137-dt-bindings-rtc-mediatek-add-bindings-for-MediaTek-S.patch b/target/linux/mediatek/patches-4.14/0137-dt-bindings-rtc-mediatek-add-bindings-for-MediaTek-S.patch
deleted file mode 100644
index a003bd78a8..0000000000
--- a/target/linux/mediatek/patches-4.14/0137-dt-bindings-rtc-mediatek-add-bindings-for-MediaTek-S.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 3254edde244fcbcce3bf4da1ade9db2db558ae28 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 23 Oct 2017 15:16:44 +0800
-Subject: [PATCH 137/224] dt-bindings: rtc: mediatek: add bindings for MediaTek
- SoC based RTC
-
-Add device-tree binding for MediaTek SoC based RTC
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
----
- .../devicetree/bindings/rtc/rtc-mt7622.txt | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
-@@ -0,0 +1,21 @@
-+Device-Tree bindings for MediaTek SoC based RTC
-+
-+Required properties:
-+- compatible : Should be
-+ "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
-+- reg : Specifies base physical address and size of the registers;
-+- interrupts : Should contain the interrupt for RTC alarm;
-+- clocks : Specifies list of clock specifiers, corresponding to
-+ entries in clock-names property;
-+- clock-names : Should contain "rtc" entries
-+
-+Example:
-+
-+rtc: rtc@10212800 {
-+ compatible = "mediatek,mt7622-rtc",
-+ "mediatek,soc-rtc";
-+ reg = <0 0x10212800 0 0x200>;
-+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_RTC>;
-+ clock-names = "rtc";
-+};
diff --git a/target/linux/mediatek/patches-4.14/0138-rtc-mediatek-add-driver-for-RTC-on-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0138-rtc-mediatek-add-driver-for-RTC-on-MT7622-SoC.patch
deleted file mode 100644
index 8cf900d143..0000000000
--- a/target/linux/mediatek/patches-4.14/0138-rtc-mediatek-add-driver-for-RTC-on-MT7622-SoC.patch
+++ /dev/null
@@ -1,471 +0,0 @@
-From 4cf0b74c175cb5cb751e449223c0baafc2f98499 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 23 Oct 2017 15:16:45 +0800
-Subject: [PATCH 138/224] rtc: mediatek: add driver for RTC on MT7622 SoC
-
-This patch introduces the driver for the RTC on MT7622 SoC.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
----
- drivers/rtc/Kconfig | 10 ++
- drivers/rtc/Makefile | 1 +
- drivers/rtc/rtc-mt7622.c | 422 +++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 433 insertions(+)
- create mode 100644 drivers/rtc/rtc-mt7622.c
-
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -1715,6 +1715,16 @@ config RTC_DRV_MT6397
-
- If you want to use Mediatek(R) RTC interface, select Y or M here.
-
-+config RTC_DRV_MT7622
-+ tristate "MediaTek SoC based RTC"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+ help
-+ This enables support for the real time clock built in the MediaTek
-+ SoCs.
-+
-+ This drive can also be built as a module. If so, the module
-+ will be called rtc-mt7622.
-+
- config RTC_DRV_XGENE
- tristate "APM X-Gene RTC"
- depends on HAS_IOMEM
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -103,6 +103,7 @@ obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc
- obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o
- obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o
- obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o
-+obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o
- obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
- obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o
- obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o
---- /dev/null
-+++ b/drivers/rtc/rtc-mt7622.c
-@@ -0,0 +1,422 @@
-+/*
-+ * Driver for MediaTek SoC based RTC
-+ *
-+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#define MTK_RTC_DEV KBUILD_MODNAME
-+
-+#define MTK_RTC_PWRCHK1 0x4
-+#define RTC_PWRCHK1_MAGIC 0xc6
-+
-+#define MTK_RTC_PWRCHK2 0x8
-+#define RTC_PWRCHK2_MAGIC 0x9a
-+
-+#define MTK_RTC_KEY 0xc
-+#define RTC_KEY_MAGIC 0x59
-+
-+#define MTK_RTC_PROT1 0x10
-+#define RTC_PROT1_MAGIC 0xa3
-+
-+#define MTK_RTC_PROT2 0x14
-+#define RTC_PROT2_MAGIC 0x57
-+
-+#define MTK_RTC_PROT3 0x18
-+#define RTC_PROT3_MAGIC 0x67
-+
-+#define MTK_RTC_PROT4 0x1c
-+#define RTC_PROT4_MAGIC 0xd2
-+
-+#define MTK_RTC_CTL 0x20
-+#define RTC_RC_STOP BIT(0)
-+
-+#define MTK_RTC_DEBNCE 0x2c
-+#define RTC_DEBNCE_MASK GENMASK(2, 0)
-+
-+#define MTK_RTC_INT 0x30
-+#define RTC_INT_AL_STA BIT(4)
-+
-+/*
-+ * Ranges from 0x40 to 0x78 provide RTC time setup for year, month,
-+ * day of month, day of week, hour, minute and second.
-+ */
-+#define MTK_RTC_TREG(_t, _f) (0x40 + (0x4 * (_f)) + ((_t) * 0x20))
-+
-+#define MTK_RTC_AL_CTL 0x7c
-+#define RTC_AL_EN BIT(0)
-+#define RTC_AL_ALL GENMASK(7, 0)
-+
-+/*
-+ * The offset is used in the translation for the year between in struct
-+ * rtc_time and in hardware register MTK_RTC_TREG(x,MTK_YEA)
-+ */
-+#define MTK_RTC_TM_YR_OFFSET 100
-+
-+/*
-+ * The lowest value for the valid tm_year. RTC hardware would take incorrectly
-+ * tm_year 100 as not a leap year and thus it is also required being excluded
-+ * from the valid options.
-+ */
-+#define MTK_RTC_TM_YR_L (MTK_RTC_TM_YR_OFFSET + 1)
-+
-+/*
-+ * The most year the RTC can hold is 99 and the next to 99 in year register
-+ * would be wraparound to 0, for MT7622.
-+ */
-+#define MTK_RTC_HW_YR_LIMIT 99
-+
-+/* The highest value for the valid tm_year */
-+#define MTK_RTC_TM_YR_H (MTK_RTC_TM_YR_OFFSET + MTK_RTC_HW_YR_LIMIT)
-+
-+/* Simple macro helps to check whether the hardware supports the tm_year */
-+#define MTK_RTC_TM_YR_VALID(_y) ((_y) >= MTK_RTC_TM_YR_L && \
-+ (_y) <= MTK_RTC_TM_YR_H)
-+
-+/* Types of the function the RTC provides are time counter and alarm. */
-+enum {
-+ MTK_TC,
-+ MTK_AL,
-+};
-+
-+/* Indexes are used for the pointer to relevant registers in MTK_RTC_TREG */
-+enum {
-+ MTK_YEA,
-+ MTK_MON,
-+ MTK_DOM,
-+ MTK_DOW,
-+ MTK_HOU,
-+ MTK_MIN,
-+ MTK_SEC
-+};
-+
-+struct mtk_rtc {
-+ struct rtc_device *rtc;
-+ void __iomem *base;
-+ int irq;
-+ struct clk *clk;
-+};
-+
-+static void mtk_w32(struct mtk_rtc *rtc, u32 reg, u32 val)
-+{
-+ writel_relaxed(val, rtc->base + reg);
-+}
-+
-+static u32 mtk_r32(struct mtk_rtc *rtc, u32 reg)
-+{
-+ return readl_relaxed(rtc->base + reg);
-+}
-+
-+static void mtk_rmw(struct mtk_rtc *rtc, u32 reg, u32 mask, u32 set)
-+{
-+ u32 val;
-+
-+ val = mtk_r32(rtc, reg);
-+ val &= ~mask;
-+ val |= set;
-+ mtk_w32(rtc, reg, val);
-+}
-+
-+static void mtk_set(struct mtk_rtc *rtc, u32 reg, u32 val)
-+{
-+ mtk_rmw(rtc, reg, 0, val);
-+}
-+
-+static void mtk_clr(struct mtk_rtc *rtc, u32 reg, u32 val)
-+{
-+ mtk_rmw(rtc, reg, val, 0);
-+}
-+
-+static void mtk_rtc_hw_init(struct mtk_rtc *hw)
-+{
-+ /* The setup of the init sequence is for allowing RTC got to work */
-+ mtk_w32(hw, MTK_RTC_PWRCHK1, RTC_PWRCHK1_MAGIC);
-+ mtk_w32(hw, MTK_RTC_PWRCHK2, RTC_PWRCHK2_MAGIC);
-+ mtk_w32(hw, MTK_RTC_KEY, RTC_KEY_MAGIC);
-+ mtk_w32(hw, MTK_RTC_PROT1, RTC_PROT1_MAGIC);
-+ mtk_w32(hw, MTK_RTC_PROT2, RTC_PROT2_MAGIC);
-+ mtk_w32(hw, MTK_RTC_PROT3, RTC_PROT3_MAGIC);
-+ mtk_w32(hw, MTK_RTC_PROT4, RTC_PROT4_MAGIC);
-+ mtk_rmw(hw, MTK_RTC_DEBNCE, RTC_DEBNCE_MASK, 0);
-+ mtk_clr(hw, MTK_RTC_CTL, RTC_RC_STOP);
-+}
-+
-+static void mtk_rtc_get_alarm_or_time(struct mtk_rtc *hw, struct rtc_time *tm,
-+ int time_alarm)
-+{
-+ u32 year, mon, mday, wday, hour, min, sec;
-+
-+ /*
-+ * Read again until the field of the second is not changed which
-+ * ensures all fields in the consistent state. Note that MTK_SEC must
-+ * be read first. In this way, it guarantees the others remain not
-+ * changed when the results for two MTK_SEC consecutive reads are same.
-+ */
-+ do {
-+ sec = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC));
-+ min = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_MIN));
-+ hour = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_HOU));
-+ wday = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_DOW));
-+ mday = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_DOM));
-+ mon = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_MON));
-+ year = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_YEA));
-+ } while (sec != mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC)));
-+
-+ tm->tm_sec = sec;
-+ tm->tm_min = min;
-+ tm->tm_hour = hour;
-+ tm->tm_wday = wday;
-+ tm->tm_mday = mday;
-+ tm->tm_mon = mon - 1;
-+
-+ /* Rebase to the absolute year which userspace queries */
-+ tm->tm_year = year + MTK_RTC_TM_YR_OFFSET;
-+}
-+
-+static void mtk_rtc_set_alarm_or_time(struct mtk_rtc *hw, struct rtc_time *tm,
-+ int time_alarm)
-+{
-+ u32 year;
-+
-+ /* Rebase to the relative year which RTC hardware requires */
-+ year = tm->tm_year - MTK_RTC_TM_YR_OFFSET;
-+
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_YEA), year);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_MON), tm->tm_mon + 1);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_DOW), tm->tm_wday);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_DOM), tm->tm_mday);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_HOU), tm->tm_hour);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_MIN), tm->tm_min);
-+ mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC), tm->tm_sec);
-+}
-+
-+static irqreturn_t mtk_rtc_alarmirq(int irq, void *id)
-+{
-+ struct mtk_rtc *hw = (struct mtk_rtc *)id;
-+ u32 irq_sta;
-+
-+ irq_sta = mtk_r32(hw, MTK_RTC_INT);
-+ if (irq_sta & RTC_INT_AL_STA) {
-+ /* Stop alarm also implicitly disables the alarm interrupt */
-+ mtk_w32(hw, MTK_RTC_AL_CTL, 0);
-+ rtc_update_irq(hw->rtc, 1, RTC_IRQF | RTC_AF);
-+
-+ /* Ack alarm interrupt status */
-+ mtk_w32(hw, MTK_RTC_INT, RTC_INT_AL_STA);
-+ return IRQ_HANDLED;
-+ }
-+
-+ return IRQ_NONE;
-+}
-+
-+static int mtk_rtc_gettime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+
-+ mtk_rtc_get_alarm_or_time(hw, tm, MTK_TC);
-+
-+ return rtc_valid_tm(tm);
-+}
-+
-+static int mtk_rtc_settime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+
-+ if (!MTK_RTC_TM_YR_VALID(tm->tm_year))
-+ return -EINVAL;
-+
-+ /* Stop time counter before setting a new one*/
-+ mtk_set(hw, MTK_RTC_CTL, RTC_RC_STOP);
-+
-+ mtk_rtc_set_alarm_or_time(hw, tm, MTK_TC);
-+
-+ /* Restart the time counter */
-+ mtk_clr(hw, MTK_RTC_CTL, RTC_RC_STOP);
-+
-+ return 0;
-+}
-+
-+static int mtk_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+ struct rtc_time *alrm_tm = &wkalrm->time;
-+
-+ mtk_rtc_get_alarm_or_time(hw, alrm_tm, MTK_AL);
-+
-+ wkalrm->enabled = !!(mtk_r32(hw, MTK_RTC_AL_CTL) & RTC_AL_EN);
-+ wkalrm->pending = !!(mtk_r32(hw, MTK_RTC_INT) & RTC_INT_AL_STA);
-+
-+ return 0;
-+}
-+
-+static int mtk_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+ struct rtc_time *alrm_tm = &wkalrm->time;
-+
-+ if (!MTK_RTC_TM_YR_VALID(alrm_tm->tm_year))
-+ return -EINVAL;
-+
-+ /*
-+ * Stop the alarm also implicitly including disables interrupt before
-+ * setting a new one.
-+ */
-+ mtk_clr(hw, MTK_RTC_AL_CTL, RTC_AL_EN);
-+
-+ /*
-+ * Avoid contention between mtk_rtc_setalarm and IRQ handler so that
-+ * disabling the interrupt and awaiting for pending IRQ handler to
-+ * complete.
-+ */
-+ synchronize_irq(hw->irq);
-+
-+ mtk_rtc_set_alarm_or_time(hw, alrm_tm, MTK_AL);
-+
-+ /* Restart the alarm with the new setup */
-+ mtk_w32(hw, MTK_RTC_AL_CTL, RTC_AL_ALL);
-+
-+ return 0;
-+}
-+
-+static const struct rtc_class_ops mtk_rtc_ops = {
-+ .read_time = mtk_rtc_gettime,
-+ .set_time = mtk_rtc_settime,
-+ .read_alarm = mtk_rtc_getalarm,
-+ .set_alarm = mtk_rtc_setalarm,
-+};
-+
-+static const struct of_device_id mtk_rtc_match[] = {
-+ { .compatible = "mediatek,mt7622-rtc" },
-+ { .compatible = "mediatek,soc-rtc" },
-+ {},
-+};
-+
-+static int mtk_rtc_probe(struct platform_device *pdev)
-+{
-+ struct mtk_rtc *hw;
-+ struct resource *res;
-+ int ret;
-+
-+ hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL);
-+ if (!hw)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ hw->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hw->base))
-+ return PTR_ERR(hw->base);
-+
-+ hw->clk = devm_clk_get(&pdev->dev, "rtc");
-+ if (IS_ERR(hw->clk)) {
-+ dev_err(&pdev->dev, "No clock\n");
-+ return PTR_ERR(hw->clk);
-+ }
-+
-+ ret = clk_prepare_enable(hw->clk);
-+ if (ret)
-+ return ret;
-+
-+ hw->irq = platform_get_irq(pdev, 0);
-+ if (hw->irq < 0) {
-+ dev_err(&pdev->dev, "No IRQ resource\n");
-+ ret = hw->irq;
-+ goto err;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, hw->irq, mtk_rtc_alarmirq,
-+ 0, dev_name(&pdev->dev), hw);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Can't request IRQ\n");
-+ goto err;
-+ }
-+
-+ mtk_rtc_hw_init(hw);
-+
-+ device_init_wakeup(&pdev->dev, true);
-+
-+ hw->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
-+ &mtk_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(hw->rtc)) {
-+ ret = PTR_ERR(hw->rtc);
-+ dev_err(&pdev->dev, "Unable to register device\n");
-+ goto err;
-+ }
-+
-+ return 0;
-+err:
-+ clk_disable_unprepare(hw->clk);
-+
-+ return ret;
-+}
-+
-+static int mtk_rtc_remove(struct platform_device *pdev)
-+{
-+ struct mtk_rtc *hw = platform_get_drvdata(pdev);
-+
-+ clk_disable_unprepare(hw->clk);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int mtk_rtc_suspend(struct device *dev)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+
-+ if (device_may_wakeup(dev))
-+ enable_irq_wake(hw->irq);
-+
-+ return 0;
-+}
-+
-+static int mtk_rtc_resume(struct device *dev)
-+{
-+ struct mtk_rtc *hw = dev_get_drvdata(dev);
-+
-+ if (device_may_wakeup(dev))
-+ disable_irq_wake(hw->irq);
-+
-+ return 0;
-+}
-+
-+static SIMPLE_DEV_PM_OPS(mtk_rtc_pm_ops, mtk_rtc_suspend, mtk_rtc_resume);
-+
-+#define MTK_RTC_PM_OPS (&mtk_rtc_pm_ops)
-+#else /* CONFIG_PM */
-+#define MTK_RTC_PM_OPS NULL
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver mtk_rtc_driver = {
-+ .probe = mtk_rtc_probe,
-+ .remove = mtk_rtc_remove,
-+ .driver = {
-+ .name = MTK_RTC_DEV,
-+ .of_match_table = mtk_rtc_match,
-+ .pm = MTK_RTC_PM_OPS,
-+ },
-+};
-+
-+module_platform_driver(mtk_rtc_driver);
-+
-+MODULE_DESCRIPTION("MediaTek SoC based RTC Driver");
-+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/mediatek/patches-4.14/0139-rtc-mediatek-enhance-the-description-for-MediaTek-PM.patch b/target/linux/mediatek/patches-4.14/0139-rtc-mediatek-enhance-the-description-for-MediaTek-PM.patch
deleted file mode 100644
index 0513a085ac..0000000000
--- a/target/linux/mediatek/patches-4.14/0139-rtc-mediatek-enhance-the-description-for-MediaTek-PM.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From ff4f8c2c894f1e6b5b5551571e22b2f947545bff Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 23 Oct 2017 15:16:46 +0800
-Subject: [PATCH 139/224] rtc: mediatek: enhance the description for MediaTek
- PMIC based RTC
-
-Give a better description for original MediaTek RTC driver as PMIC based
-RTC in order to distinguish SoC based RTC. Also turning all words with
-Mediatek to MediaTek here.
-
-Cc: Eddie Huang <eddie.huang@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Acked-by: Eddie Huang <eddie.huang@mediatek.com>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
----
- drivers/rtc/Kconfig | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -1706,14 +1706,14 @@ config RTC_DRV_MOXART
- will be called rtc-moxart
-
- config RTC_DRV_MT6397
-- tristate "Mediatek Real Time Clock driver"
-+ tristate "MediaTek PMIC based RTC"
- depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
- help
-- This selects the Mediatek(R) RTC driver. RTC is part of Mediatek
-+ This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
- MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- Mediatek(R) RTC driver.
-+ MediaTek(R) RTC driver.
-
-- If you want to use Mediatek(R) RTC interface, select Y or M here.
-+ If you want to use MediaTek(R) RTC interface, select Y or M here.
-
- config RTC_DRV_MT7622
- tristate "MediaTek SoC based RTC"
diff --git a/target/linux/mediatek/patches-4.14/0140-mtd-nand-mtk-change-the-compile-sequence-of-mtk_nand.patch b/target/linux/mediatek/patches-4.14/0140-mtd-nand-mtk-change-the-compile-sequence-of-mtk_nand.patch
deleted file mode 100644
index 2afb956efe..0000000000
--- a/target/linux/mediatek/patches-4.14/0140-mtd-nand-mtk-change-the-compile-sequence-of-mtk_nand.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 71f568692a6d0a746d72c32d46a1bc09486b9dbb Mon Sep 17 00:00:00 2001
-From: Xiaolei Li <xiaolei.li@mediatek.com>
-Date: Sat, 28 Oct 2017 14:52:23 +0800
-Subject: [PATCH 140/224] mtd: nand: mtk: change the compile sequence of
- mtk_nand.o and mtk_ecc.o
-
-There will get mtk ecc handler during mtk nand probe now.
-If mtk ecc module is not initialized, then mtk nand probe will return
--EPROBE_DEFER, and retry later.
-
-Change the compile sequence of mtk_nand.o and mtk_ecc.o, initialize mtk
-ecc module before mtk nand module. This makes mtk nand module initialized
-as soon as possible.
-
-Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -59,7 +59,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
- obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
- obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
--obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o
-+obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_amd.o
diff --git a/target/linux/mediatek/patches-4.14/0142-mmc-dt-bindings-Add-reg-source_cg-latch-ck-for-Media.patch b/target/linux/mediatek/patches-4.14/0142-mmc-dt-bindings-Add-reg-source_cg-latch-ck-for-Media.patch
deleted file mode 100644
index 2750a2cc20..0000000000
--- a/target/linux/mediatek/patches-4.14/0142-mmc-dt-bindings-Add-reg-source_cg-latch-ck-for-Media.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 9ff279fef1a47a152993bf23f8d75fd233c27015 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:28 +0800
-Subject: [PATCH 142/224] mmc: dt-bindings: Add reg/source_cg/latch-ck for
- Mediatek MMC bindings
-
-Change the comptiable for support of multi-platform
-Make compatible explicit, as MMC host of mt8173 has difference with
-mt8135(mt8173 supports hs400 and hs400_tune),so that need separate
-mt8173/mt8135 compatible name.
-Add description for reg
-Add description for source_cg
-Add description for mediatek,latch-ck
-Note that source_cg and mediatek,latch-ck are optional for some projects,
-eg, MT2701 do not have source_cg, and MT2712 do not need
-mediatek,latch-ck
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 18 +++++++++++++++---
- 1 file changed, 15 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-@@ -7,10 +7,18 @@ This file documents differences between
- and the properties used by the msdc driver.
-
- Required properties:
--- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
-+- compatible: value should be either of the following.
-+ "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
-+ "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
-+ "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
-+ "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
-+- reg: physical base address of the controller and length
- - interrupts: Should contain MSDC interrupt number
--- clocks: MSDC source clock, HCLK
--- clock-names: "source", "hclk"
-+- clocks: Should contain phandle for the clock feeding the MMC controller
-+- clock-names: Should contain the following:
-+ "source" - source clock (required)
-+ "hclk" - HCLK which used for host (required)
-+ "source_cg" - independent source clock gate (required for MT2712)
- - pinctrl-names: should be "default", "state_uhs"
- - pinctrl-0: should contain default/high speed pin ctrl
- - pinctrl-1: should contain uhs mode pin ctrl
-@@ -30,6 +38,10 @@ Optional properties:
- - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
- If present,HS400 command responses are sampled on rising edges.
- If not present,HS400 command responses are sampled on falling edges.
-+- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
-+ error caused by stop clock(fifo full)
-+ Valid range = [0:0x7]. if not present, default value is 0.
-+ applied to compatible "mediatek,mt2701-mmc".
-
- Examples:
- mmc0: mmc@11230000 {
diff --git a/target/linux/mediatek/patches-4.14/0143-mmc-mediatek-add-support-of-mt2701-mt2712.patch b/target/linux/mediatek/patches-4.14/0143-mmc-mediatek-add-support-of-mt2701-mt2712.patch
deleted file mode 100644
index c06cf73a78..0000000000
--- a/target/linux/mediatek/patches-4.14/0143-mmc-mediatek-add-support-of-mt2701-mt2712.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 8119f3e147deaf97a66e953fecf3d2b0edbb07fd Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:29 +0800
-Subject: [PATCH 143/224] mmc: mediatek: add support of mt2701/mt2712
-
-mt2701/mt2712 has 12bit clock div, which is not compatible with
-mt8135/mt8173. and, some additional features will be added in
-mt2701/mt2712, so that need distinguish it by comatibale name.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
- 1 file changed, 69 insertions(+), 13 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -95,6 +95,9 @@
- #define MSDC_CFG_CKDIV (0xff << 8) /* RW */
- #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
- #define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
-+#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
-+#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
-+#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
-
- /* MSDC_IOCON mask */
- #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
-@@ -297,6 +300,10 @@ struct msdc_save_para {
- u32 emmc50_cfg0;
- };
-
-+struct mtk_mmc_compatible {
-+ u8 clk_div_bits;
-+};
-+
- struct msdc_tune_para {
- u32 iocon;
- u32 pad_tune;
-@@ -311,6 +318,7 @@ struct msdc_delay_phase {
-
- struct msdc_host {
- struct device *dev;
-+ const struct mtk_mmc_compatible *dev_comp;
- struct mmc_host *mmc; /* mmc structure */
- int cmd_rsp;
-
-@@ -352,6 +360,31 @@ struct msdc_host {
- struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
- };
-
-+static const struct mtk_mmc_compatible mt8135_compat = {
-+ .clk_div_bits = 8,
-+};
-+
-+static const struct mtk_mmc_compatible mt8173_compat = {
-+ .clk_div_bits = 8,
-+};
-+
-+static const struct mtk_mmc_compatible mt2701_compat = {
-+ .clk_div_bits = 12,
-+};
-+
-+static const struct mtk_mmc_compatible mt2712_compat = {
-+ .clk_div_bits = 12,
-+};
-+
-+static const struct of_device_id msdc_of_ids[] = {
-+ { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
-+ { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
-+ { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
-+ { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, msdc_of_ids);
-+
- static void sdr_set_bits(void __iomem *reg, u32 bs)
- {
- u32 val = readl(reg);
-@@ -511,7 +544,12 @@ static void msdc_set_timeout(struct msdc
- timeout = (ns + clk_ns - 1) / clk_ns + clks;
- /* in 1048576 sclk cycle unit */
- timeout = (timeout + (0x1 << 20) - 1) >> 20;
-- sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
-+ if (host->dev_comp->clk_div_bits == 8)
-+ sdr_get_field(host->base + MSDC_CFG,
-+ MSDC_CFG_CKMOD, &mode);
-+ else
-+ sdr_get_field(host->base + MSDC_CFG,
-+ MSDC_CFG_CKMOD_EXTRA, &mode);
- /*DDR mode will double the clk cycles for data timeout */
- timeout = mode >= 2 ? timeout * 2 : timeout;
- timeout = timeout > 1 ? timeout - 1 : 0;
-@@ -550,7 +588,11 @@ static void msdc_set_mclk(struct msdc_ho
-
- flags = readl(host->base + MSDC_INTEN);
- sdr_clr_bits(host->base + MSDC_INTEN, flags);
-- sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
-+ if (host->dev_comp->clk_div_bits == 8)
-+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
-+ else
-+ sdr_clr_bits(host->base + MSDC_CFG,
-+ MSDC_CFG_HS400_CK_MODE_EXTRA);
- if (timing == MMC_TIMING_UHS_DDR50 ||
- timing == MMC_TIMING_MMC_DDR52 ||
- timing == MMC_TIMING_MMC_HS400) {
-@@ -570,8 +612,12 @@ static void msdc_set_mclk(struct msdc_ho
-
- if (timing == MMC_TIMING_MMC_HS400 &&
- hz >= (host->src_clk_freq >> 1)) {
-- sdr_set_bits(host->base + MSDC_CFG,
-- MSDC_CFG_HS400_CK_MODE);
-+ if (host->dev_comp->clk_div_bits == 8)
-+ sdr_set_bits(host->base + MSDC_CFG,
-+ MSDC_CFG_HS400_CK_MODE);
-+ else
-+ sdr_set_bits(host->base + MSDC_CFG,
-+ MSDC_CFG_HS400_CK_MODE_EXTRA);
- sclk = host->src_clk_freq >> 1;
- div = 0; /* div is ignore when bit18 is set */
- }
-@@ -589,8 +635,15 @@ static void msdc_set_mclk(struct msdc_ho
- sclk = (host->src_clk_freq >> 2) / div;
- }
- }
-- sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
-- (mode << 8) | div);
-+ if (host->dev_comp->clk_div_bits == 8)
-+ sdr_set_field(host->base + MSDC_CFG,
-+ MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
-+ (mode << 8) | div);
-+ else
-+ sdr_set_field(host->base + MSDC_CFG,
-+ MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
-+ (mode << 12) | div);
-+
- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
- while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
- cpu_relax();
-@@ -1620,12 +1673,17 @@ static int msdc_drv_probe(struct platfor
- struct mmc_host *mmc;
- struct msdc_host *host;
- struct resource *res;
-+ const struct of_device_id *of_id;
- int ret;
-
- if (!pdev->dev.of_node) {
- dev_err(&pdev->dev, "No DT found\n");
- return -EINVAL;
- }
-+
-+ of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
-+ if (!of_id)
-+ return -EINVAL;
- /* Allocate MMC host for this device */
- mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
- if (!mmc)
-@@ -1689,11 +1747,15 @@ static int msdc_drv_probe(struct platfor
- msdc_of_property_parse(pdev, host);
-
- host->dev = &pdev->dev;
-+ host->dev_comp = of_id->data;
- host->mmc = mmc;
- host->src_clk_freq = clk_get_rate(host->src_clk);
- /* Set host parameters to mmc */
- mmc->ops = &mt_msdc_ops;
-- mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
-+ if (host->dev_comp->clk_div_bits == 8)
-+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
-+ else
-+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
-
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
- /* MMC core transfer sizes tunable parameters */
-@@ -1842,12 +1904,6 @@ static const struct dev_pm_ops msdc_dev_
- SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
- };
-
--static const struct of_device_id msdc_of_ids[] = {
-- { .compatible = "mediatek,mt8135-mmc", },
-- {}
--};
--MODULE_DEVICE_TABLE(of, msdc_of_ids);
--
- static struct platform_driver mt_msdc_driver = {
- .probe = msdc_drv_probe,
- .remove = msdc_drv_remove,
diff --git a/target/linux/mediatek/patches-4.14/0144-dt-bindings-ARM-Mediatek-Document-bindings-for-MT271.patch b/target/linux/mediatek/patches-4.14/0144-dt-bindings-ARM-Mediatek-Document-bindings-for-MT271.patch
deleted file mode 100644
index 132ae8f4fb..0000000000
--- a/target/linux/mediatek/patches-4.14/0144-dt-bindings-ARM-Mediatek-Document-bindings-for-MT271.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From 815d90faddd22e05f05623086a9c42187fbfb1d8 Mon Sep 17 00:00:00 2001
-From: "weiyi.lu@mediatek.com" <weiyi.lu@mediatek.com>
-Date: Mon, 23 Oct 2017 12:10:32 +0800
-Subject: [PATCH 144/224] dt-bindings: ARM: Mediatek: Document bindings for
- MT2712
-
-This patch adds the binding documentation for apmixedsys, bdpsys,
-imgsys, imgsys, infracfg, mcucfg, mfgcfg, mmsys, pericfg, topckgen,
-vdecsys and vencsys for Mediatek MT2712.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,bdpsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,imgsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 +
- .../bindings/arm/mediatek/mediatek,jpgdecsys.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,mcucfg.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,mfgcfg.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,mmsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,pericfg.txt | 1 +
- .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 +
- .../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,vencsys.txt | 1 +
- 12 files changed, 75 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-apmixedsys"
-+ - "mediatek,mt2712-apmixedsys", "syscon"
- - "mediatek,mt6797-apmixedsys"
- - "mediatek,mt8135-apmixedsys"
- - "mediatek,mt8173-apmixedsys"
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be:
- - "mediatek,mt2701-bdpsys", "syscon"
-+ - "mediatek,mt2712-bdpsys", "syscon"
- - #clock-cells: Must be 1
-
- The bdpsys controller uses the common clk binding from
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-imgsys", "syscon"
-+ - "mediatek,mt2712-imgsys", "syscon"
- - "mediatek,mt6797-imgsys", "syscon"
- - "mediatek,mt8173-imgsys", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
-@@ -8,6 +8,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-infracfg", "syscon"
-+ - "mediatek,mt2712-infracfg", "syscon"
- - "mediatek,mt6797-infracfg", "syscon"
- - "mediatek,mt8135-infracfg", "syscon"
- - "mediatek,mt8173-infracfg", "syscon"
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
-@@ -0,0 +1,22 @@
-+Mediatek jpgdecsys controller
-+============================
-+
-+The Mediatek jpgdecsys controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be:
-+ - "mediatek,mt2712-jpgdecsys", "syscon"
-+- #clock-cells: Must be 1
-+
-+The jpgdecsys controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+jpgdecsys: syscon@19000000 {
-+ compatible = "mediatek,mt2712-jpgdecsys", "syscon";
-+ reg = <0 0x19000000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
-@@ -0,0 +1,22 @@
-+Mediatek mcucfg controller
-+============================
-+
-+The Mediatek mcucfg controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be one of:
-+ - "mediatek,mt2712-mcucfg", "syscon"
-+- #clock-cells: Must be 1
-+
-+The mcucfg controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+mcucfg: syscon@10220000 {
-+ compatible = "mediatek,mt2712-mcucfg", "syscon";
-+ reg = <0 0x10220000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
-@@ -0,0 +1,22 @@
-+Mediatek mfgcfg controller
-+============================
-+
-+The Mediatek mfgcfg controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be one of:
-+ - "mediatek,mt2712-mfgcfg", "syscon"
-+- #clock-cells: Must be 1
-+
-+The mfgcfg controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+mfgcfg: syscon@13000000 {
-+ compatible = "mediatek,mt2712-mfgcfg", "syscon";
-+ reg = <0 0x13000000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-mmsys", "syscon"
-+ - "mediatek,mt2712-mmsys", "syscon"
- - "mediatek,mt6797-mmsys", "syscon"
- - "mediatek,mt8173-mmsys", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
-@@ -8,6 +8,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-pericfg", "syscon"
-+ - "mediatek,mt2712-pericfg", "syscon"
- - "mediatek,mt8135-pericfg", "syscon"
- - "mediatek,mt8173-pericfg", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-topckgen"
-+ - "mediatek,mt2712-topckgen", "syscon"
- - "mediatek,mt6797-topckgen"
- - "mediatek,mt8135-topckgen"
- - "mediatek,mt8173-topckgen"
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be one of:
- - "mediatek,mt2701-vdecsys", "syscon"
-+ - "mediatek,mt2712-vdecsys", "syscon"
- - "mediatek,mt6797-vdecsys", "syscon"
- - "mediatek,mt8173-vdecsys", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
-@@ -6,6 +6,7 @@ The Mediatek vencsys controller provides
- Required Properties:
-
- - compatible: Should be one of:
-+ - "mediatek,mt2712-vencsys", "syscon"
- - "mediatek,mt6797-vencsys", "syscon"
- - "mediatek,mt8173-vencsys", "syscon"
- - #clock-cells: Must be 1
diff --git a/target/linux/mediatek/patches-4.14/0145-clk-mediatek-Add-dt-bindings-for-MT2712-clocks.patch b/target/linux/mediatek/patches-4.14/0145-clk-mediatek-Add-dt-bindings-for-MT2712-clocks.patch
deleted file mode 100644
index fb86c81bc2..0000000000
--- a/target/linux/mediatek/patches-4.14/0145-clk-mediatek-Add-dt-bindings-for-MT2712-clocks.patch
+++ /dev/null
@@ -1,446 +0,0 @@
-From 8a64bf0c04a4b7670cf56be5b0ae63fe9d6ecd56 Mon Sep 17 00:00:00 2001
-From: "weiyi.lu@mediatek.com" <weiyi.lu@mediatek.com>
-Date: Mon, 23 Oct 2017 12:10:33 +0800
-Subject: [PATCH 145/224] clk: mediatek: Add dt-bindings for MT2712 clocks
-
-Add MT2712 clock dt-bindings, include topckgen, apmixedsys,
-infracfg, pericfg, mcucfg and subsystem clocks.
-
-Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- include/dt-bindings/clock/mt2712-clk.h | 427 +++++++++++++++++++++++++++++++++
- 1 file changed, 427 insertions(+)
- create mode 100644 include/dt-bindings/clock/mt2712-clk.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/mt2712-clk.h
-@@ -0,0 +1,427 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MT2712_H
-+#define _DT_BINDINGS_CLK_MT2712_H
-+
-+/* APMIXEDSYS */
-+
-+#define CLK_APMIXED_MAINPLL 0
-+#define CLK_APMIXED_UNIVPLL 1
-+#define CLK_APMIXED_VCODECPLL 2
-+#define CLK_APMIXED_VENCPLL 3
-+#define CLK_APMIXED_APLL1 4
-+#define CLK_APMIXED_APLL2 5
-+#define CLK_APMIXED_LVDSPLL 6
-+#define CLK_APMIXED_LVDSPLL2 7
-+#define CLK_APMIXED_MSDCPLL 8
-+#define CLK_APMIXED_MSDCPLL2 9
-+#define CLK_APMIXED_TVDPLL 10
-+#define CLK_APMIXED_MMPLL 11
-+#define CLK_APMIXED_ARMCA35PLL 12
-+#define CLK_APMIXED_ARMCA72PLL 13
-+#define CLK_APMIXED_ETHERPLL 14
-+#define CLK_APMIXED_NR_CLK 15
-+
-+/* TOPCKGEN */
-+
-+#define CLK_TOP_ARMCA35PLL 0
-+#define CLK_TOP_ARMCA35PLL_600M 1
-+#define CLK_TOP_ARMCA35PLL_400M 2
-+#define CLK_TOP_ARMCA72PLL 3
-+#define CLK_TOP_SYSPLL 4
-+#define CLK_TOP_SYSPLL_D2 5
-+#define CLK_TOP_SYSPLL1_D2 6
-+#define CLK_TOP_SYSPLL1_D4 7
-+#define CLK_TOP_SYSPLL1_D8 8
-+#define CLK_TOP_SYSPLL1_D16 9
-+#define CLK_TOP_SYSPLL_D3 10
-+#define CLK_TOP_SYSPLL2_D2 11
-+#define CLK_TOP_SYSPLL2_D4 12
-+#define CLK_TOP_SYSPLL_D5 13
-+#define CLK_TOP_SYSPLL3_D2 14
-+#define CLK_TOP_SYSPLL3_D4 15
-+#define CLK_TOP_SYSPLL_D7 16
-+#define CLK_TOP_SYSPLL4_D2 17
-+#define CLK_TOP_SYSPLL4_D4 18
-+#define CLK_TOP_UNIVPLL 19
-+#define CLK_TOP_UNIVPLL_D7 20
-+#define CLK_TOP_UNIVPLL_D26 21
-+#define CLK_TOP_UNIVPLL_D52 22
-+#define CLK_TOP_UNIVPLL_D104 23
-+#define CLK_TOP_UNIVPLL_D208 24
-+#define CLK_TOP_UNIVPLL_D2 25
-+#define CLK_TOP_UNIVPLL1_D2 26
-+#define CLK_TOP_UNIVPLL1_D4 27
-+#define CLK_TOP_UNIVPLL1_D8 28
-+#define CLK_TOP_UNIVPLL_D3 29
-+#define CLK_TOP_UNIVPLL2_D2 30
-+#define CLK_TOP_UNIVPLL2_D4 31
-+#define CLK_TOP_UNIVPLL2_D8 32
-+#define CLK_TOP_UNIVPLL_D5 33
-+#define CLK_TOP_UNIVPLL3_D2 34
-+#define CLK_TOP_UNIVPLL3_D4 35
-+#define CLK_TOP_UNIVPLL3_D8 36
-+#define CLK_TOP_F_MP0_PLL1 37
-+#define CLK_TOP_F_MP0_PLL2 38
-+#define CLK_TOP_F_BIG_PLL1 39
-+#define CLK_TOP_F_BIG_PLL2 40
-+#define CLK_TOP_F_BUS_PLL1 41
-+#define CLK_TOP_F_BUS_PLL2 42
-+#define CLK_TOP_APLL1 43
-+#define CLK_TOP_APLL1_D2 44
-+#define CLK_TOP_APLL1_D4 45
-+#define CLK_TOP_APLL1_D8 46
-+#define CLK_TOP_APLL1_D16 47
-+#define CLK_TOP_APLL2 48
-+#define CLK_TOP_APLL2_D2 49
-+#define CLK_TOP_APLL2_D4 50
-+#define CLK_TOP_APLL2_D8 51
-+#define CLK_TOP_APLL2_D16 52
-+#define CLK_TOP_LVDSPLL 53
-+#define CLK_TOP_LVDSPLL_D2 54
-+#define CLK_TOP_LVDSPLL_D4 55
-+#define CLK_TOP_LVDSPLL_D8 56
-+#define CLK_TOP_LVDSPLL2 57
-+#define CLK_TOP_LVDSPLL2_D2 58
-+#define CLK_TOP_LVDSPLL2_D4 59
-+#define CLK_TOP_LVDSPLL2_D8 60
-+#define CLK_TOP_ETHERPLL_125M 61
-+#define CLK_TOP_ETHERPLL_50M 62
-+#define CLK_TOP_CVBS 63
-+#define CLK_TOP_CVBS_D2 64
-+#define CLK_TOP_SYS_26M 65
-+#define CLK_TOP_MMPLL 66
-+#define CLK_TOP_MMPLL_D2 67
-+#define CLK_TOP_VENCPLL 68
-+#define CLK_TOP_VENCPLL_D2 69
-+#define CLK_TOP_VCODECPLL 70
-+#define CLK_TOP_VCODECPLL_D2 71
-+#define CLK_TOP_TVDPLL 72
-+#define CLK_TOP_TVDPLL_D2 73
-+#define CLK_TOP_TVDPLL_D4 74
-+#define CLK_TOP_TVDPLL_D8 75
-+#define CLK_TOP_TVDPLL_429M 76
-+#define CLK_TOP_TVDPLL_429M_D2 77
-+#define CLK_TOP_TVDPLL_429M_D4 78
-+#define CLK_TOP_MSDCPLL 79
-+#define CLK_TOP_MSDCPLL_D2 80
-+#define CLK_TOP_MSDCPLL_D4 81
-+#define CLK_TOP_MSDCPLL2 82
-+#define CLK_TOP_MSDCPLL2_D2 83
-+#define CLK_TOP_MSDCPLL2_D4 84
-+#define CLK_TOP_CLK26M_D2 85
-+#define CLK_TOP_D2A_ULCLK_6P5M 86
-+#define CLK_TOP_VPLL3_DPIX 87
-+#define CLK_TOP_VPLL_DPIX 88
-+#define CLK_TOP_LTEPLL_FS26M 89
-+#define CLK_TOP_DMPLL 90
-+#define CLK_TOP_DSI0_LNTC 91
-+#define CLK_TOP_DSI1_LNTC 92
-+#define CLK_TOP_LVDSTX3_CLKDIG_CTS 93
-+#define CLK_TOP_LVDSTX_CLKDIG_CTS 94
-+#define CLK_TOP_CLKRTC_EXT 95
-+#define CLK_TOP_CLKRTC_INT 96
-+#define CLK_TOP_CSI0 97
-+#define CLK_TOP_CVBSPLL 98
-+#define CLK_TOP_AXI_SEL 99
-+#define CLK_TOP_MEM_SEL 100
-+#define CLK_TOP_MM_SEL 101
-+#define CLK_TOP_PWM_SEL 102
-+#define CLK_TOP_VDEC_SEL 103
-+#define CLK_TOP_VENC_SEL 104
-+#define CLK_TOP_MFG_SEL 105
-+#define CLK_TOP_CAMTG_SEL 106
-+#define CLK_TOP_UART_SEL 107
-+#define CLK_TOP_SPI_SEL 108
-+#define CLK_TOP_USB20_SEL 109
-+#define CLK_TOP_USB30_SEL 110
-+#define CLK_TOP_MSDC50_0_HCLK_SEL 111
-+#define CLK_TOP_MSDC50_0_SEL 112
-+#define CLK_TOP_MSDC30_1_SEL 113
-+#define CLK_TOP_MSDC30_2_SEL 114
-+#define CLK_TOP_MSDC30_3_SEL 115
-+#define CLK_TOP_AUDIO_SEL 116
-+#define CLK_TOP_AUD_INTBUS_SEL 117
-+#define CLK_TOP_PMICSPI_SEL 118
-+#define CLK_TOP_DPILVDS1_SEL 119
-+#define CLK_TOP_ATB_SEL 120
-+#define CLK_TOP_NR_SEL 121
-+#define CLK_TOP_NFI2X_SEL 122
-+#define CLK_TOP_IRDA_SEL 123
-+#define CLK_TOP_CCI400_SEL 124
-+#define CLK_TOP_AUD_1_SEL 125
-+#define CLK_TOP_AUD_2_SEL 126
-+#define CLK_TOP_MEM_MFG_IN_AS_SEL 127
-+#define CLK_TOP_AXI_MFG_IN_AS_SEL 128
-+#define CLK_TOP_SCAM_SEL 129
-+#define CLK_TOP_NFIECC_SEL 130
-+#define CLK_TOP_PE2_MAC_P0_SEL 131
-+#define CLK_TOP_PE2_MAC_P1_SEL 132
-+#define CLK_TOP_DPILVDS_SEL 133
-+#define CLK_TOP_MSDC50_3_HCLK_SEL 134
-+#define CLK_TOP_HDCP_SEL 135
-+#define CLK_TOP_HDCP_24M_SEL 136
-+#define CLK_TOP_RTC_SEL 137
-+#define CLK_TOP_SPINOR_SEL 138
-+#define CLK_TOP_APLL_SEL 139
-+#define CLK_TOP_APLL2_SEL 140
-+#define CLK_TOP_A1SYS_HP_SEL 141
-+#define CLK_TOP_A2SYS_HP_SEL 142
-+#define CLK_TOP_ASM_L_SEL 143
-+#define CLK_TOP_ASM_M_SEL 144
-+#define CLK_TOP_ASM_H_SEL 145
-+#define CLK_TOP_I2SO1_SEL 146
-+#define CLK_TOP_I2SO2_SEL 147
-+#define CLK_TOP_I2SO3_SEL 148
-+#define CLK_TOP_TDMO0_SEL 149
-+#define CLK_TOP_TDMO1_SEL 150
-+#define CLK_TOP_I2SI1_SEL 151
-+#define CLK_TOP_I2SI2_SEL 152
-+#define CLK_TOP_I2SI3_SEL 153
-+#define CLK_TOP_ETHER_125M_SEL 154
-+#define CLK_TOP_ETHER_50M_SEL 155
-+#define CLK_TOP_JPGDEC_SEL 156
-+#define CLK_TOP_SPISLV_SEL 157
-+#define CLK_TOP_ETHER_50M_RMII_SEL 158
-+#define CLK_TOP_CAM2TG_SEL 159
-+#define CLK_TOP_DI_SEL 160
-+#define CLK_TOP_TVD_SEL 161
-+#define CLK_TOP_I2C_SEL 162
-+#define CLK_TOP_PWM_INFRA_SEL 163
-+#define CLK_TOP_MSDC0P_AES_SEL 164
-+#define CLK_TOP_CMSYS_SEL 165
-+#define CLK_TOP_GCPU_SEL 166
-+#define CLK_TOP_AUD_APLL1_SEL 167
-+#define CLK_TOP_AUD_APLL2_SEL 168
-+#define CLK_TOP_DA_AUDULL_VTX_6P5M_SEL 169
-+#define CLK_TOP_APLL_DIV0 170
-+#define CLK_TOP_APLL_DIV1 171
-+#define CLK_TOP_APLL_DIV2 172
-+#define CLK_TOP_APLL_DIV3 173
-+#define CLK_TOP_APLL_DIV4 174
-+#define CLK_TOP_APLL_DIV5 175
-+#define CLK_TOP_APLL_DIV6 176
-+#define CLK_TOP_APLL_DIV7 177
-+#define CLK_TOP_APLL_DIV_PDN0 178
-+#define CLK_TOP_APLL_DIV_PDN1 179
-+#define CLK_TOP_APLL_DIV_PDN2 180
-+#define CLK_TOP_APLL_DIV_PDN3 181
-+#define CLK_TOP_APLL_DIV_PDN4 182
-+#define CLK_TOP_APLL_DIV_PDN5 183
-+#define CLK_TOP_APLL_DIV_PDN6 184
-+#define CLK_TOP_APLL_DIV_PDN7 185
-+#define CLK_TOP_NR_CLK 186
-+
-+/* INFRACFG */
-+
-+#define CLK_INFRA_DBGCLK 0
-+#define CLK_INFRA_GCE 1
-+#define CLK_INFRA_M4U 2
-+#define CLK_INFRA_KP 3
-+#define CLK_INFRA_AO_SPI0 4
-+#define CLK_INFRA_AO_SPI1 5
-+#define CLK_INFRA_AO_UART5 6
-+#define CLK_INFRA_NR_CLK 7
-+
-+/* PERICFG */
-+
-+#define CLK_PERI_NFI 0
-+#define CLK_PERI_THERM 1
-+#define CLK_PERI_PWM0 2
-+#define CLK_PERI_PWM1 3
-+#define CLK_PERI_PWM2 4
-+#define CLK_PERI_PWM3 5
-+#define CLK_PERI_PWM4 6
-+#define CLK_PERI_PWM5 7
-+#define CLK_PERI_PWM6 8
-+#define CLK_PERI_PWM7 9
-+#define CLK_PERI_PWM 10
-+#define CLK_PERI_AP_DMA 11
-+#define CLK_PERI_MSDC30_0 12
-+#define CLK_PERI_MSDC30_1 13
-+#define CLK_PERI_MSDC30_2 14
-+#define CLK_PERI_MSDC30_3 15
-+#define CLK_PERI_UART0 16
-+#define CLK_PERI_UART1 17
-+#define CLK_PERI_UART2 18
-+#define CLK_PERI_UART3 19
-+#define CLK_PERI_I2C0 20
-+#define CLK_PERI_I2C1 21
-+#define CLK_PERI_I2C2 22
-+#define CLK_PERI_I2C3 23
-+#define CLK_PERI_I2C4 24
-+#define CLK_PERI_AUXADC 25
-+#define CLK_PERI_SPI0 26
-+#define CLK_PERI_SPI 27
-+#define CLK_PERI_I2C5 28
-+#define CLK_PERI_SPI2 29
-+#define CLK_PERI_SPI3 30
-+#define CLK_PERI_SPI5 31
-+#define CLK_PERI_UART4 32
-+#define CLK_PERI_SFLASH 33
-+#define CLK_PERI_GMAC 34
-+#define CLK_PERI_PCIE0 35
-+#define CLK_PERI_PCIE1 36
-+#define CLK_PERI_GMAC_PCLK 37
-+#define CLK_PERI_MSDC50_0_EN 38
-+#define CLK_PERI_MSDC30_1_EN 39
-+#define CLK_PERI_MSDC30_2_EN 40
-+#define CLK_PERI_MSDC30_3_EN 41
-+#define CLK_PERI_MSDC50_0_HCLK_EN 42
-+#define CLK_PERI_MSDC50_3_HCLK_EN 43
-+#define CLK_PERI_NR_CLK 44
-+
-+/* MCUCFG */
-+
-+#define CLK_MCU_MP0_SEL 0
-+#define CLK_MCU_MP2_SEL 1
-+#define CLK_MCU_BUS_SEL 2
-+#define CLK_MCU_NR_CLK 3
-+
-+/* MFGCFG */
-+
-+#define CLK_MFG_BG3D 0
-+#define CLK_MFG_NR_CLK 1
-+
-+/* MMSYS */
-+
-+#define CLK_MM_SMI_COMMON 0
-+#define CLK_MM_SMI_LARB0 1
-+#define CLK_MM_CAM_MDP 2
-+#define CLK_MM_MDP_RDMA0 3
-+#define CLK_MM_MDP_RDMA1 4
-+#define CLK_MM_MDP_RSZ0 5
-+#define CLK_MM_MDP_RSZ1 6
-+#define CLK_MM_MDP_RSZ2 7
-+#define CLK_MM_MDP_TDSHP0 8
-+#define CLK_MM_MDP_TDSHP1 9
-+#define CLK_MM_MDP_CROP 10
-+#define CLK_MM_MDP_WDMA 11
-+#define CLK_MM_MDP_WROT0 12
-+#define CLK_MM_MDP_WROT1 13
-+#define CLK_MM_FAKE_ENG 14
-+#define CLK_MM_MUTEX_32K 15
-+#define CLK_MM_DISP_OVL0 16
-+#define CLK_MM_DISP_OVL1 17
-+#define CLK_MM_DISP_RDMA0 18
-+#define CLK_MM_DISP_RDMA1 19
-+#define CLK_MM_DISP_RDMA2 20
-+#define CLK_MM_DISP_WDMA0 21
-+#define CLK_MM_DISP_WDMA1 22
-+#define CLK_MM_DISP_COLOR0 23
-+#define CLK_MM_DISP_COLOR1 24
-+#define CLK_MM_DISP_AAL 25
-+#define CLK_MM_DISP_GAMMA 26
-+#define CLK_MM_DISP_UFOE 27
-+#define CLK_MM_DISP_SPLIT0 28
-+#define CLK_MM_DISP_OD 29
-+#define CLK_MM_DISP_PWM0_MM 30
-+#define CLK_MM_DISP_PWM0_26M 31
-+#define CLK_MM_DISP_PWM1_MM 32
-+#define CLK_MM_DISP_PWM1_26M 33
-+#define CLK_MM_DSI0_ENGINE 34
-+#define CLK_MM_DSI0_DIGITAL 35
-+#define CLK_MM_DSI1_ENGINE 36
-+#define CLK_MM_DSI1_DIGITAL 37
-+#define CLK_MM_DPI_PIXEL 38
-+#define CLK_MM_DPI_ENGINE 39
-+#define CLK_MM_DPI1_PIXEL 40
-+#define CLK_MM_DPI1_ENGINE 41
-+#define CLK_MM_LVDS_PIXEL 42
-+#define CLK_MM_LVDS_CTS 43
-+#define CLK_MM_SMI_LARB4 44
-+#define CLK_MM_SMI_COMMON1 45
-+#define CLK_MM_SMI_LARB5 46
-+#define CLK_MM_MDP_RDMA2 47
-+#define CLK_MM_MDP_TDSHP2 48
-+#define CLK_MM_DISP_OVL2 49
-+#define CLK_MM_DISP_WDMA2 50
-+#define CLK_MM_DISP_COLOR2 51
-+#define CLK_MM_DISP_AAL1 52
-+#define CLK_MM_DISP_OD1 53
-+#define CLK_MM_LVDS1_PIXEL 54
-+#define CLK_MM_LVDS1_CTS 55
-+#define CLK_MM_SMI_LARB7 56
-+#define CLK_MM_MDP_RDMA3 57
-+#define CLK_MM_MDP_WROT2 58
-+#define CLK_MM_DSI2 59
-+#define CLK_MM_DSI2_DIGITAL 60
-+#define CLK_MM_DSI3 61
-+#define CLK_MM_DSI3_DIGITAL 62
-+#define CLK_MM_NR_CLK 63
-+
-+/* IMGSYS */
-+
-+#define CLK_IMG_SMI_LARB2 0
-+#define CLK_IMG_SENINF_SCAM_EN 1
-+#define CLK_IMG_SENINF_CAM_EN 2
-+#define CLK_IMG_CAM_SV_EN 3
-+#define CLK_IMG_CAM_SV1_EN 4
-+#define CLK_IMG_CAM_SV2_EN 5
-+#define CLK_IMG_NR_CLK 6
-+
-+/* BDPSYS */
-+
-+#define CLK_BDP_BRIDGE_B 0
-+#define CLK_BDP_BRIDGE_DRAM 1
-+#define CLK_BDP_LARB_DRAM 2
-+#define CLK_BDP_WR_CHANNEL_VDI_PXL 3
-+#define CLK_BDP_WR_CHANNEL_VDI_DRAM 4
-+#define CLK_BDP_WR_CHANNEL_VDI_B 5
-+#define CLK_BDP_MT_B 6
-+#define CLK_BDP_DISPFMT_27M 7
-+#define CLK_BDP_DISPFMT_27M_VDOUT 8
-+#define CLK_BDP_DISPFMT_27_74_74 9
-+#define CLK_BDP_DISPFMT_2FS 10
-+#define CLK_BDP_DISPFMT_2FS_2FS74_148 11
-+#define CLK_BDP_DISPFMT_B 12
-+#define CLK_BDP_VDO_DRAM 13
-+#define CLK_BDP_VDO_2FS 14
-+#define CLK_BDP_VDO_B 15
-+#define CLK_BDP_WR_CHANNEL_DI_PXL 16
-+#define CLK_BDP_WR_CHANNEL_DI_DRAM 17
-+#define CLK_BDP_WR_CHANNEL_DI_B 18
-+#define CLK_BDP_NR_AGENT 19
-+#define CLK_BDP_NR_DRAM 20
-+#define CLK_BDP_NR_B 21
-+#define CLK_BDP_BRIDGE_RT_B 22
-+#define CLK_BDP_BRIDGE_RT_DRAM 23
-+#define CLK_BDP_LARB_RT_DRAM 24
-+#define CLK_BDP_TVD_TDC 25
-+#define CLK_BDP_TVD_54 26
-+#define CLK_BDP_TVD_CBUS 27
-+#define CLK_BDP_NR_CLK 28
-+
-+/* VDECSYS */
-+
-+#define CLK_VDEC_CKEN 0
-+#define CLK_VDEC_LARB1_CKEN 1
-+#define CLK_VDEC_IMGRZ_CKEN 2
-+#define CLK_VDEC_NR_CLK 3
-+
-+/* VENCSYS */
-+
-+#define CLK_VENC_SMI_COMMON_CON 0
-+#define CLK_VENC_VENC 1
-+#define CLK_VENC_SMI_LARB6 2
-+#define CLK_VENC_NR_CLK 3
-+
-+/* JPGDECSYS */
-+
-+#define CLK_JPGDEC_JPGDEC1 0
-+#define CLK_JPGDEC_JPGDEC 1
-+#define CLK_JPGDEC_NR_CLK 2
-+
-+#endif /* _DT_BINDINGS_CLK_MT2712_H */
diff --git a/target/linux/mediatek/patches-4.14/0146-clk-mediatek-Add-MT2712-clock-support.patch b/target/linux/mediatek/patches-4.14/0146-clk-mediatek-Add-MT2712-clock-support.patch
deleted file mode 100644
index 98ddbd6af2..0000000000
--- a/target/linux/mediatek/patches-4.14/0146-clk-mediatek-Add-MT2712-clock-support.patch
+++ /dev/null
@@ -1,2296 +0,0 @@
-From ec5192303a3938d0972fde3b1f2526d8d6dd02d7 Mon Sep 17 00:00:00 2001
-From: "weiyi.lu@mediatek.com" <weiyi.lu@mediatek.com>
-Date: Mon, 23 Oct 2017 12:10:34 +0800
-Subject: [PATCH 146/224] clk: mediatek: Add MT2712 clock support
-
-Add MT2712 clock support, include topckgen, apmixedsys,
-infracfg, pericfg, mcucfg and subsystem clocks.
-
-Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
-[sboyd@codeaurora.org: Static on top_clk_data]
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mediatek/Kconfig | 50 ++
- drivers/clk/mediatek/Makefile | 8 +
- drivers/clk/mediatek/clk-mt2712-bdp.c | 102 +++
- drivers/clk/mediatek/clk-mt2712-img.c | 80 ++
- drivers/clk/mediatek/clk-mt2712-jpgdec.c | 76 ++
- drivers/clk/mediatek/clk-mt2712-mfg.c | 75 ++
- drivers/clk/mediatek/clk-mt2712-mm.c | 170 ++++
- drivers/clk/mediatek/clk-mt2712-vdec.c | 94 ++
- drivers/clk/mediatek/clk-mt2712-venc.c | 77 ++
- drivers/clk/mediatek/clk-mt2712.c | 1435 ++++++++++++++++++++++++++++++
- drivers/clk/mediatek/clk-mtk.h | 2 +
- drivers/clk/mediatek/clk-pll.c | 13 +-
- 12 files changed, 2180 insertions(+), 2 deletions(-)
- create mode 100644 drivers/clk/mediatek/clk-mt2712-bdp.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-img.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-jpgdec.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-mfg.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-mm.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-vdec.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712-venc.c
- create mode 100644 drivers/clk/mediatek/clk-mt2712.c
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -50,6 +50,56 @@ config COMMON_CLK_MT2701_BDPSYS
- ---help---
- This driver supports Mediatek MT2701 bdpsys clocks.
-
-+config COMMON_CLK_MT2712
-+ bool "Clock driver for Mediatek MT2712"
-+ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
-+ select COMMON_CLK_MEDIATEK
-+ default ARCH_MEDIATEK && ARM64
-+ ---help---
-+ This driver supports Mediatek MT2712 basic clocks.
-+
-+config COMMON_CLK_MT2712_BDPSYS
-+ bool "Clock driver for Mediatek MT2712 bdpsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 bdpsys clocks.
-+
-+config COMMON_CLK_MT2712_IMGSYS
-+ bool "Clock driver for Mediatek MT2712 imgsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 imgsys clocks.
-+
-+config COMMON_CLK_MT2712_JPGDECSYS
-+ bool "Clock driver for Mediatek MT2712 jpgdecsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 jpgdecsys clocks.
-+
-+config COMMON_CLK_MT2712_MFGCFG
-+ bool "Clock driver for Mediatek MT2712 mfgcfg"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 mfgcfg clocks.
-+
-+config COMMON_CLK_MT2712_MMSYS
-+ bool "Clock driver for Mediatek MT2712 mmsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 mmsys clocks.
-+
-+config COMMON_CLK_MT2712_VDECSYS
-+ bool "Clock driver for Mediatek MT2712 vdecsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 vdecsys clocks.
-+
-+config COMMON_CLK_MT2712_VENCSYS
-+ bool "Clock driver for Mediatek MT2712 vencsys"
-+ depends on COMMON_CLK_MT2712
-+ ---help---
-+ This driver supports Mediatek MT2712 vencsys clocks.
-+
- config COMMON_CLK_MT6797
- bool "Clock driver for Mediatek MT6797"
- depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -13,5 +13,13 @@ obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) +
- obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
- obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
- obj-$(CONFIG_COMMON_CLK_MT2701_VDECSYS) += clk-mt2701-vdec.o
-+obj-$(CONFIG_COMMON_CLK_MT2712) += clk-mt2712.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_BDPSYS) += clk-mt2712-bdp.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_IMGSYS) += clk-mt2712-img.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_JPGDECSYS) += clk-mt2712-jpgdec.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_MFGCFG) += clk-mt2712-mfg.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_MMSYS) += clk-mt2712-mm.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_VDECSYS) += clk-mt2712-vdec.o
-+obj-$(CONFIG_COMMON_CLK_MT2712_VENCSYS) += clk-mt2712-venc.o
- obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
- obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-bdp.c
-@@ -0,0 +1,102 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs bdp_cg_regs = {
-+ .set_ofs = 0x100,
-+ .clr_ofs = 0x100,
-+ .sta_ofs = 0x100,
-+};
-+
-+#define GATE_BDP(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &bdp_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+static const struct mtk_gate bdp_clks[] = {
-+ GATE_BDP(CLK_BDP_BRIDGE_B, "bdp_bridge_b", "mm_sel", 0),
-+ GATE_BDP(CLK_BDP_BRIDGE_DRAM, "bdp_bridge_d", "mm_sel", 1),
-+ GATE_BDP(CLK_BDP_LARB_DRAM, "bdp_larb_d", "mm_sel", 2),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_VDI_PXL, "bdp_vdi_pxl", "tvd_sel", 3),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_VDI_DRAM, "bdp_vdi_d", "mm_sel", 4),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_VDI_B, "bdp_vdi_b", "mm_sel", 5),
-+ GATE_BDP(CLK_BDP_MT_B, "bdp_fmt_b", "mm_sel", 9),
-+ GATE_BDP(CLK_BDP_DISPFMT_27M, "bdp_27m", "di_sel", 10),
-+ GATE_BDP(CLK_BDP_DISPFMT_27M_VDOUT, "bdp_27m_vdout", "di_sel", 11),
-+ GATE_BDP(CLK_BDP_DISPFMT_27_74_74, "bdp_27_74_74", "di_sel", 12),
-+ GATE_BDP(CLK_BDP_DISPFMT_2FS, "bdp_2fs", "di_sel", 13),
-+ GATE_BDP(CLK_BDP_DISPFMT_2FS_2FS74_148, "bdp_2fs74_148", "di_sel", 14),
-+ GATE_BDP(CLK_BDP_DISPFMT_B, "bdp_b", "mm_sel", 15),
-+ GATE_BDP(CLK_BDP_VDO_DRAM, "bdp_vdo_d", "mm_sel", 16),
-+ GATE_BDP(CLK_BDP_VDO_2FS, "bdp_vdo_2fs", "di_sel", 17),
-+ GATE_BDP(CLK_BDP_VDO_B, "bdp_vdo_b", "mm_sel", 18),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_DI_PXL, "bdp_di_pxl", "di_sel", 19),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_DI_DRAM, "bdp_di_d", "mm_sel", 20),
-+ GATE_BDP(CLK_BDP_WR_CHANNEL_DI_B, "bdp_di_b", "mm_sel", 21),
-+ GATE_BDP(CLK_BDP_NR_AGENT, "bdp_nr_agent", "nr_sel", 22),
-+ GATE_BDP(CLK_BDP_NR_DRAM, "bdp_nr_d", "mm_sel", 23),
-+ GATE_BDP(CLK_BDP_NR_B, "bdp_nr_b", "mm_sel", 24),
-+ GATE_BDP(CLK_BDP_BRIDGE_RT_B, "bdp_bridge_rt_b", "mm_sel", 25),
-+ GATE_BDP(CLK_BDP_BRIDGE_RT_DRAM, "bdp_bridge_rt_d", "mm_sel", 26),
-+ GATE_BDP(CLK_BDP_LARB_RT_DRAM, "bdp_larb_rt_d", "mm_sel", 27),
-+ GATE_BDP(CLK_BDP_TVD_TDC, "bdp_tvd_tdc", "mm_sel", 28),
-+ GATE_BDP(CLK_BDP_TVD_54, "bdp_tvd_clk_54", "tvd_sel", 29),
-+ GATE_BDP(CLK_BDP_TVD_CBUS, "bdp_tvd_cbus", "mm_sel", 30),
-+};
-+
-+static int clk_mt2712_bdp_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_BDP_NR_CLK);
-+
-+ mtk_clk_register_gates(node, bdp_clks, ARRAY_SIZE(bdp_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_bdp[] = {
-+ { .compatible = "mediatek,mt2712-bdpsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_bdp_drv = {
-+ .probe = clk_mt2712_bdp_probe,
-+ .driver = {
-+ .name = "clk-mt2712-bdp",
-+ .of_match_table = of_match_clk_mt2712_bdp,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_bdp_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-img.c
-@@ -0,0 +1,80 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs img_cg_regs = {
-+ .set_ofs = 0x0,
-+ .clr_ofs = 0x0,
-+ .sta_ofs = 0x0,
-+};
-+
-+#define GATE_IMG(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &img_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+static const struct mtk_gate img_clks[] = {
-+ GATE_IMG(CLK_IMG_SMI_LARB2, "img_smi_larb2", "mm_sel", 0),
-+ GATE_IMG(CLK_IMG_SENINF_SCAM_EN, "img_scam_en", "csi0", 3),
-+ GATE_IMG(CLK_IMG_SENINF_CAM_EN, "img_cam_en", "mm_sel", 8),
-+ GATE_IMG(CLK_IMG_CAM_SV_EN, "img_cam_sv_en", "mm_sel", 9),
-+ GATE_IMG(CLK_IMG_CAM_SV1_EN, "img_cam_sv1_en", "mm_sel", 10),
-+ GATE_IMG(CLK_IMG_CAM_SV2_EN, "img_cam_sv2_en", "mm_sel", 11),
-+};
-+
-+static int clk_mt2712_img_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_IMG_NR_CLK);
-+
-+ mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_img[] = {
-+ { .compatible = "mediatek,mt2712-imgsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_img_drv = {
-+ .probe = clk_mt2712_img_probe,
-+ .driver = {
-+ .name = "clk-mt2712-img",
-+ .of_match_table = of_match_clk_mt2712_img,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_img_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-jpgdec.c
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs jpgdec_cg_regs = {
-+ .set_ofs = 0x4,
-+ .clr_ofs = 0x8,
-+ .sta_ofs = 0x0,
-+};
-+
-+#define GATE_JPGDEC(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &jpgdec_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate jpgdec_clks[] = {
-+ GATE_JPGDEC(CLK_JPGDEC_JPGDEC1, "jpgdec_jpgdec1", "jpgdec_sel", 0),
-+ GATE_JPGDEC(CLK_JPGDEC_JPGDEC, "jpgdec_jpgdec", "jpgdec_sel", 4),
-+};
-+
-+static int clk_mt2712_jpgdec_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_JPGDEC_NR_CLK);
-+
-+ mtk_clk_register_gates(node, jpgdec_clks, ARRAY_SIZE(jpgdec_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_jpgdec[] = {
-+ { .compatible = "mediatek,mt2712-jpgdecsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_jpgdec_drv = {
-+ .probe = clk_mt2712_jpgdec_probe,
-+ .driver = {
-+ .name = "clk-mt2712-jpgdec",
-+ .of_match_table = of_match_clk_mt2712_jpgdec,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_jpgdec_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-mfg.c
-@@ -0,0 +1,75 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs mfg_cg_regs = {
-+ .set_ofs = 0x4,
-+ .clr_ofs = 0x8,
-+ .sta_ofs = 0x0,
-+};
-+
-+#define GATE_MFG(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &mfg_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static const struct mtk_gate mfg_clks[] = {
-+ GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "mfg_sel", 0),
-+};
-+
-+static int clk_mt2712_mfg_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_MFG_NR_CLK);
-+
-+ mtk_clk_register_gates(node, mfg_clks, ARRAY_SIZE(mfg_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_mfg[] = {
-+ { .compatible = "mediatek,mt2712-mfgcfg", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_mfg_drv = {
-+ .probe = clk_mt2712_mfg_probe,
-+ .driver = {
-+ .name = "clk-mt2712-mfg",
-+ .of_match_table = of_match_clk_mt2712_mfg,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_mfg_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-mm.c
-@@ -0,0 +1,170 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs mm0_cg_regs = {
-+ .set_ofs = 0x104,
-+ .clr_ofs = 0x108,
-+ .sta_ofs = 0x100,
-+};
-+
-+static const struct mtk_gate_regs mm1_cg_regs = {
-+ .set_ofs = 0x114,
-+ .clr_ofs = 0x118,
-+ .sta_ofs = 0x110,
-+};
-+
-+static const struct mtk_gate_regs mm2_cg_regs = {
-+ .set_ofs = 0x224,
-+ .clr_ofs = 0x228,
-+ .sta_ofs = 0x220,
-+};
-+
-+#define GATE_MM0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &mm0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_MM1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &mm1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_MM2(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &mm2_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static const struct mtk_gate mm_clks[] = {
-+ /* MM0 */
-+ GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
-+ GATE_MM0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
-+ GATE_MM0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 2),
-+ GATE_MM0(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_sel", 3),
-+ GATE_MM0(CLK_MM_MDP_RDMA1, "mm_mdp_rdma1", "mm_sel", 4),
-+ GATE_MM0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 5),
-+ GATE_MM0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 6),
-+ GATE_MM0(CLK_MM_MDP_RSZ2, "mm_mdp_rsz2", "mm_sel", 7),
-+ GATE_MM0(CLK_MM_MDP_TDSHP0, "mm_mdp_tdshp0", "mm_sel", 8),
-+ GATE_MM0(CLK_MM_MDP_TDSHP1, "mm_mdp_tdshp1", "mm_sel", 9),
-+ GATE_MM0(CLK_MM_MDP_CROP, "mm_mdp_crop", "mm_sel", 10),
-+ GATE_MM0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
-+ GATE_MM0(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_sel", 12),
-+ GATE_MM0(CLK_MM_MDP_WROT1, "mm_mdp_wrot1", "mm_sel", 13),
-+ GATE_MM0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 14),
-+ GATE_MM0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "clk32k", 15),
-+ GATE_MM0(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_sel", 16),
-+ GATE_MM0(CLK_MM_DISP_OVL1, "mm_disp_ovl1", "mm_sel", 17),
-+ GATE_MM0(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_sel", 18),
-+ GATE_MM0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
-+ GATE_MM0(CLK_MM_DISP_RDMA2, "mm_disp_rdma2", "mm_sel", 20),
-+ GATE_MM0(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_sel", 21),
-+ GATE_MM0(CLK_MM_DISP_WDMA1, "mm_disp_wdma1", "mm_sel", 22),
-+ GATE_MM0(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_sel", 23),
-+ GATE_MM0(CLK_MM_DISP_COLOR1, "mm_disp_color1", "mm_sel", 24),
-+ GATE_MM0(CLK_MM_DISP_AAL, "mm_disp_aal", "mm_sel", 25),
-+ GATE_MM0(CLK_MM_DISP_GAMMA, "mm_disp_gamma", "mm_sel", 26),
-+ GATE_MM0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 27),
-+ GATE_MM0(CLK_MM_DISP_SPLIT0, "mm_disp_split0", "mm_sel", 28),
-+ GATE_MM0(CLK_MM_DISP_OD, "mm_disp_od", "mm_sel", 31),
-+ /* MM1 */
-+ GATE_MM1(CLK_MM_DISP_PWM0_MM, "mm_pwm0_mm", "mm_sel", 0),
-+ GATE_MM1(CLK_MM_DISP_PWM0_26M, "mm_pwm0_26m", "pwm_sel", 1),
-+ GATE_MM1(CLK_MM_DISP_PWM1_MM, "mm_pwm1_mm", "mm_sel", 2),
-+ GATE_MM1(CLK_MM_DISP_PWM1_26M, "mm_pwm1_26m", "pwm_sel", 3),
-+ GATE_MM1(CLK_MM_DSI0_ENGINE, "mm_dsi0_engine", "mm_sel", 4),
-+ GATE_MM1(CLK_MM_DSI0_DIGITAL, "mm_dsi0_digital", "dsi0_lntc", 5),
-+ GATE_MM1(CLK_MM_DSI1_ENGINE, "mm_dsi1_engine", "mm_sel", 6),
-+ GATE_MM1(CLK_MM_DSI1_DIGITAL, "mm_dsi1_digital", "dsi1_lntc", 7),
-+ GATE_MM1(CLK_MM_DPI_PIXEL, "mm_dpi_pixel", "vpll_dpix", 8),
-+ GATE_MM1(CLK_MM_DPI_ENGINE, "mm_dpi_engine", "mm_sel", 9),
-+ GATE_MM1(CLK_MM_DPI1_PIXEL, "mm_dpi1_pixel", "vpll3_dpix", 10),
-+ GATE_MM1(CLK_MM_DPI1_ENGINE, "mm_dpi1_engine", "mm_sel", 11),
-+ GATE_MM1(CLK_MM_LVDS_PIXEL, "mm_lvds_pixel", "vpll_dpix", 16),
-+ GATE_MM1(CLK_MM_LVDS_CTS, "mm_lvds_cts", "lvdstx", 17),
-+ GATE_MM1(CLK_MM_SMI_LARB4, "mm_smi_larb4", "mm_sel", 18),
-+ GATE_MM1(CLK_MM_SMI_COMMON1, "mm_smi_common1", "mm_sel", 21),
-+ GATE_MM1(CLK_MM_SMI_LARB5, "mm_smi_larb5", "mm_sel", 22),
-+ GATE_MM1(CLK_MM_MDP_RDMA2, "mm_mdp_rdma2", "mm_sel", 23),
-+ GATE_MM1(CLK_MM_MDP_TDSHP2, "mm_mdp_tdshp2", "mm_sel", 24),
-+ GATE_MM1(CLK_MM_DISP_OVL2, "mm_disp_ovl2", "mm_sel", 25),
-+ GATE_MM1(CLK_MM_DISP_WDMA2, "mm_disp_wdma2", "mm_sel", 26),
-+ GATE_MM1(CLK_MM_DISP_COLOR2, "mm_disp_color2", "mm_sel", 27),
-+ GATE_MM1(CLK_MM_DISP_AAL1, "mm_disp_aal1", "mm_sel", 28),
-+ GATE_MM1(CLK_MM_DISP_OD1, "mm_disp_od1", "mm_sel", 29),
-+ GATE_MM1(CLK_MM_LVDS1_PIXEL, "mm_lvds1_pixel", "vpll3_dpix", 30),
-+ GATE_MM1(CLK_MM_LVDS1_CTS, "mm_lvds1_cts", "lvdstx3", 31),
-+ /* MM2 */
-+ GATE_MM2(CLK_MM_SMI_LARB7, "mm_smi_larb7", "mm_sel", 0),
-+ GATE_MM2(CLK_MM_MDP_RDMA3, "mm_mdp_rdma3", "mm_sel", 1),
-+ GATE_MM2(CLK_MM_MDP_WROT2, "mm_mdp_wrot2", "mm_sel", 2),
-+ GATE_MM2(CLK_MM_DSI2, "mm_dsi2", "mm_sel", 3),
-+ GATE_MM2(CLK_MM_DSI2_DIGITAL, "mm_dsi2_digital", "dsi0_lntc", 4),
-+ GATE_MM2(CLK_MM_DSI3, "mm_dsi3", "mm_sel", 5),
-+ GATE_MM2(CLK_MM_DSI3_DIGITAL, "mm_dsi3_digital", "dsi1_lntc", 6),
-+};
-+
-+static int clk_mt2712_mm_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
-+
-+ mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_mm[] = {
-+ { .compatible = "mediatek,mt2712-mmsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_mm_drv = {
-+ .probe = clk_mt2712_mm_probe,
-+ .driver = {
-+ .name = "clk-mt2712-mm",
-+ .of_match_table = of_match_clk_mt2712_mm,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_mm_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-vdec.c
-@@ -0,0 +1,94 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs vdec0_cg_regs = {
-+ .set_ofs = 0x0,
-+ .clr_ofs = 0x4,
-+ .sta_ofs = 0x0,
-+};
-+
-+static const struct mtk_gate_regs vdec1_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0xc,
-+ .sta_ofs = 0x8,
-+};
-+
-+#define GATE_VDEC0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &vdec0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr_inv, \
-+ }
-+
-+#define GATE_VDEC1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &vdec1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate vdec_clks[] = {
-+ /* VDEC0 */
-+ GATE_VDEC0(CLK_VDEC_CKEN, "vdec_cken", "vdec_sel", 0),
-+ /* VDEC1 */
-+ GATE_VDEC1(CLK_VDEC_LARB1_CKEN, "vdec_larb1_cken", "vdec_sel", 0),
-+ GATE_VDEC1(CLK_VDEC_IMGRZ_CKEN, "vdec_imgrz_cken", "vdec_sel", 1),
-+};
-+
-+static int clk_mt2712_vdec_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_VDEC_NR_CLK);
-+
-+ mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_vdec[] = {
-+ { .compatible = "mediatek,mt2712-vdecsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_vdec_drv = {
-+ .probe = clk_mt2712_vdec_probe,
-+ .driver = {
-+ .name = "clk-mt2712-vdec",
-+ .of_match_table = of_match_clk_mt2712_vdec,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_vdec_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712-venc.c
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static const struct mtk_gate_regs venc_cg_regs = {
-+ .set_ofs = 0x4,
-+ .clr_ofs = 0x8,
-+ .sta_ofs = 0x0,
-+};
-+
-+#define GATE_VENC(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &venc_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate venc_clks[] = {
-+ GATE_VENC(CLK_VENC_SMI_COMMON_CON, "venc_smi", "mm_sel", 0),
-+ GATE_VENC(CLK_VENC_VENC, "venc_venc", "venc_sel", 4),
-+ GATE_VENC(CLK_VENC_SMI_LARB6, "venc_smi_larb6", "jpgdec_sel", 12),
-+};
-+
-+static int clk_mt2712_venc_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_VENC_NR_CLK);
-+
-+ mtk_clk_register_gates(node, venc_clks, ARRAY_SIZE(venc_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712_venc[] = {
-+ { .compatible = "mediatek,mt2712-vencsys", },
-+ {}
-+};
-+
-+static struct platform_driver clk_mt2712_venc_drv = {
-+ .probe = clk_mt2712_venc_probe,
-+ .driver = {
-+ .name = "clk-mt2712-venc",
-+ .of_match_table = of_match_clk_mt2712_venc,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt2712_venc_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -0,0 +1,1435 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt2712-clk.h>
-+
-+static DEFINE_SPINLOCK(mt2712_clk_lock);
-+
-+static const struct mtk_fixed_clk top_fixed_clks[] = {
-+ FIXED_CLK(CLK_TOP_VPLL3_DPIX, "vpll3_dpix", NULL, 200000000),
-+ FIXED_CLK(CLK_TOP_VPLL_DPIX, "vpll_dpix", NULL, 200000000),
-+ FIXED_CLK(CLK_TOP_LTEPLL_FS26M, "ltepll_fs26m", NULL, 26000000),
-+ FIXED_CLK(CLK_TOP_DMPLL, "dmpll_ck", NULL, 350000000),
-+ FIXED_CLK(CLK_TOP_DSI0_LNTC, "dsi0_lntc", NULL, 143000000),
-+ FIXED_CLK(CLK_TOP_DSI1_LNTC, "dsi1_lntc", NULL, 143000000),
-+ FIXED_CLK(CLK_TOP_LVDSTX3_CLKDIG_CTS, "lvdstx3", NULL, 140000000),
-+ FIXED_CLK(CLK_TOP_LVDSTX_CLKDIG_CTS, "lvdstx", NULL, 140000000),
-+ FIXED_CLK(CLK_TOP_CLKRTC_EXT, "clkrtc_ext", NULL, 32768),
-+ FIXED_CLK(CLK_TOP_CLKRTC_INT, "clkrtc_int", NULL, 32747),
-+ FIXED_CLK(CLK_TOP_CSI0, "csi0", NULL, 26000000),
-+ FIXED_CLK(CLK_TOP_CVBSPLL, "cvbspll", NULL, 108000000),
-+};
-+
-+static const struct mtk_fixed_factor top_early_divs[] = {
-+ FACTOR(CLK_TOP_SYS_26M, "sys_26m", "clk26m", 1,
-+ 1),
-+ FACTOR(CLK_TOP_CLK26M_D2, "clk26m_d2", "sys_26m", 1,
-+ 2),
-+};
-+
-+static const struct mtk_fixed_factor top_divs[] = {
-+ FACTOR(CLK_TOP_ARMCA35PLL, "armca35pll_ck", "armca35pll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_ARMCA35PLL_600M, "armca35pll_600m", "armca35pll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_ARMCA35PLL_400M, "armca35pll_400m", "armca35pll_ck", 1,
-+ 3),
-+ FACTOR(CLK_TOP_ARMCA72PLL, "armca72pll_ck", "armca72pll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_SYSPLL, "syspll_ck", "mainpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "syspll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "syspll_d2", 1,
-+ 2),
-+ FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "syspll_d2", 1,
-+ 4),
-+ FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "syspll_d2", 1,
-+ 8),
-+ FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "syspll_d2", 1,
-+ 16),
-+ FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "syspll_ck", 1,
-+ 3),
-+ FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "syspll_d3", 1,
-+ 2),
-+ FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "syspll_d3", 1,
-+ 4),
-+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "syspll_ck", 1,
-+ 5),
-+ FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "syspll_d5", 1,
-+ 2),
-+ FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "syspll_d5", 1,
-+ 4),
-+ FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "syspll_ck", 1,
-+ 7),
-+ FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "syspll_d7", 1,
-+ 2),
-+ FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "syspll_d7", 1,
-+ 4),
-+ FACTOR(CLK_TOP_UNIVPLL, "univpll_ck", "univpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll_ck", 1,
-+ 7),
-+ FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univpll_ck", 1,
-+ 26),
-+ FACTOR(CLK_TOP_UNIVPLL_D52, "univpll_d52", "univpll_ck", 1,
-+ 52),
-+ FACTOR(CLK_TOP_UNIVPLL_D104, "univpll_d104", "univpll_ck", 1,
-+ 104),
-+ FACTOR(CLK_TOP_UNIVPLL_D208, "univpll_d208", "univpll_ck", 1,
-+ 208),
-+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_d2", 1,
-+ 2),
-+ FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_d2", 1,
-+ 4),
-+ FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_d2", 1,
-+ 8),
-+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll_ck", 1,
-+ 3),
-+ FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_d3", 1,
-+ 2),
-+ FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_d3", 1,
-+ 4),
-+ FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_d3", 1,
-+ 8),
-+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll_ck", 1,
-+ 5),
-+ FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll_d5", 1,
-+ 2),
-+ FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll_d5", 1,
-+ 4),
-+ FACTOR(CLK_TOP_UNIVPLL3_D8, "univpll3_d8", "univpll_d5", 1,
-+ 8),
-+ FACTOR(CLK_TOP_F_MP0_PLL1, "f_mp0_pll1_ck", "univpll_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_F_MP0_PLL2, "f_mp0_pll2_ck", "univpll1_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_F_BIG_PLL1, "f_big_pll1_ck", "univpll_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_F_BIG_PLL2, "f_big_pll2_ck", "univpll1_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_F_BUS_PLL1, "f_bus_pll1_ck", "univpll_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_F_BUS_PLL2, "f_bus_pll2_ck", "univpll1_d2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_APLL1, "apll1_ck", "apll1", 1,
-+ 1),
-+ FACTOR(CLK_TOP_APLL1_D2, "apll1_d2", "apll1_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_APLL1_D4, "apll1_d4", "apll1_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_APLL1_D8, "apll1_d8", "apll1_ck", 1,
-+ 8),
-+ FACTOR(CLK_TOP_APLL1_D16, "apll1_d16", "apll1_ck", 1,
-+ 16),
-+ FACTOR(CLK_TOP_APLL2, "apll2_ck", "apll2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_APLL2_D8, "apll2_d8", "apll2_ck", 1,
-+ 8),
-+ FACTOR(CLK_TOP_APLL2_D16, "apll2_d16", "apll2_ck", 1,
-+ 16),
-+ FACTOR(CLK_TOP_LVDSPLL, "lvdspll_ck", "lvdspll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll_ck", 1,
-+ 8),
-+ FACTOR(CLK_TOP_LVDSPLL2, "lvdspll2_ck", "lvdspll2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_LVDSPLL2_D2, "lvdspll2_d2", "lvdspll2_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_LVDSPLL2_D4, "lvdspll2_d4", "lvdspll2_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_LVDSPLL2_D8, "lvdspll2_d8", "lvdspll2_ck", 1,
-+ 8),
-+ FACTOR(CLK_TOP_ETHERPLL_125M, "etherpll_125m", "etherpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_ETHERPLL_50M, "etherpll_50m", "etherpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_CVBS, "cvbs", "cvbspll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_CVBS_D2, "cvbs_d2", "cvbs", 1,
-+ 2),
-+ FACTOR(CLK_TOP_MMPLL, "mmpll_ck", "mmpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_VENCPLL, "vencpll_ck", "vencpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_VENCPLL_D2, "vencpll_d2", "vencpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_VCODECPLL, "vcodecpll_ck", "vcodecpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_VCODECPLL_D2, "vcodecpll_d2", "vcodecpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_TVDPLL, "tvdpll_ck", "tvdpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll_ck", 1,
-+ 8),
-+ FACTOR(CLK_TOP_TVDPLL_429M, "tvdpll_429m", "tvdpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_TVDPLL_429M_D2, "tvdpll_429m_d2", "tvdpll_429m", 1,
-+ 2),
-+ FACTOR(CLK_TOP_TVDPLL_429M_D4, "tvdpll_429m_d4", "tvdpll_429m", 1,
-+ 4),
-+ FACTOR(CLK_TOP_MSDCPLL, "msdcpll_ck", "msdcpll", 1,
-+ 1),
-+ FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_MSDCPLL2, "msdcpll2_ck", "msdcpll2", 1,
-+ 1),
-+ FACTOR(CLK_TOP_MSDCPLL2_D2, "msdcpll2_d2", "msdcpll2_ck", 1,
-+ 2),
-+ FACTOR(CLK_TOP_MSDCPLL2_D4, "msdcpll2_d4", "msdcpll2_ck", 1,
-+ 4),
-+ FACTOR(CLK_TOP_D2A_ULCLK_6P5M, "d2a_ulclk_6p5m", "clk26m", 1,
-+ 4),
-+};
-+
-+static const char * const axi_parents[] = {
-+ "clk26m",
-+ "syspll1_d2",
-+ "syspll_d5",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "univpll2_d2",
-+ "msdcpll2_ck"
-+};
-+
-+static const char * const mem_parents[] = {
-+ "clk26m",
-+ "dmpll_ck"
-+};
-+
-+static const char * const mm_parents[] = {
-+ "clk26m",
-+ "vencpll_ck",
-+ "syspll_d3",
-+ "syspll1_d2",
-+ "syspll_d5",
-+ "syspll1_d4",
-+ "univpll1_d2",
-+ "univpll2_d2"
-+};
-+
-+static const char * const pwm_parents[] = {
-+ "clk26m",
-+ "univpll2_d4",
-+ "univpll3_d2",
-+ "univpll1_d4"
-+};
-+
-+static const char * const vdec_parents[] = {
-+ "clk26m",
-+ "vcodecpll_ck",
-+ "tvdpll_429m",
-+ "univpll_d3",
-+ "vencpll_ck",
-+ "syspll_d3",
-+ "univpll1_d2",
-+ "mmpll_d2",
-+ "syspll3_d2",
-+ "tvdpll_ck"
-+};
-+
-+static const char * const venc_parents[] = {
-+ "clk26m",
-+ "univpll1_d2",
-+ "mmpll_d2",
-+ "tvdpll_d2",
-+ "syspll1_d2",
-+ "univpll_d5",
-+ "vcodecpll_d2",
-+ "univpll2_d2",
-+ "syspll3_d2"
-+};
-+
-+static const char * const mfg_parents[] = {
-+ "clk26m",
-+ "mmpll_ck",
-+ "univpll_d3",
-+ "clk26m",
-+ "clk26m",
-+ "clk26m",
-+ "clk26m",
-+ "clk26m",
-+ "clk26m",
-+ "syspll_d3",
-+ "syspll1_d2",
-+ "syspll_d5",
-+ "univpll_d3",
-+ "univpll1_d2",
-+ "univpll_d5",
-+ "univpll2_d2"
-+};
-+
-+static const char * const camtg_parents[] = {
-+ "clk26m",
-+ "univpll_d52",
-+ "univpll_d208",
-+ "univpll_d104",
-+ "clk26m_d2",
-+ "univpll_d26",
-+ "univpll2_d8",
-+ "syspll3_d4",
-+ "syspll3_d2",
-+ "univpll1_d4",
-+ "univpll2_d2"
-+};
-+
-+static const char * const uart_parents[] = {
-+ "clk26m",
-+ "univpll2_d8"
-+};
-+
-+static const char * const spi_parents[] = {
-+ "clk26m",
-+ "univpll2_d4",
-+ "univpll1_d4",
-+ "univpll2_d2",
-+ "univpll3_d2",
-+ "univpll1_d8"
-+};
-+
-+static const char * const usb20_parents[] = {
-+ "clk26m",
-+ "univpll1_d8",
-+ "univpll3_d4"
-+};
-+
-+static const char * const usb30_parents[] = {
-+ "clk26m",
-+ "univpll3_d2",
-+ "univpll3_d4",
-+ "univpll2_d4"
-+};
-+
-+static const char * const msdc50_0_h_parents[] = {
-+ "clk26m",
-+ "syspll1_d2",
-+ "syspll2_d2",
-+ "syspll4_d2",
-+ "univpll_d5",
-+ "univpll1_d4"
-+};
-+
-+static const char * const msdc50_0_parents[] = {
-+ "clk26m",
-+ "msdcpll_ck",
-+ "msdcpll_d2",
-+ "univpll1_d4",
-+ "syspll2_d2",
-+ "msdcpll_d4",
-+ "vencpll_d2",
-+ "univpll1_d2",
-+ "msdcpll2_ck",
-+ "msdcpll2_d2",
-+ "msdcpll2_d4"
-+};
-+
-+static const char * const msdc30_1_parents[] = {
-+ "clk26m",
-+ "univpll2_d2",
-+ "msdcpll_d2",
-+ "univpll1_d4",
-+ "syspll2_d2",
-+ "univpll_d7",
-+ "vencpll_d2"
-+};
-+
-+static const char * const msdc30_3_parents[] = {
-+ "clk26m",
-+ "msdcpll2_ck",
-+ "msdcpll2_d2",
-+ "univpll2_d2",
-+ "msdcpll2_d4",
-+ "univpll1_d4",
-+ "syspll2_d2",
-+ "syspll_d7",
-+ "univpll_d7",
-+ "vencpll_d2",
-+ "msdcpll_ck",
-+ "msdcpll_d2",
-+ "msdcpll_d4"
-+};
-+
-+static const char * const audio_parents[] = {
-+ "clk26m",
-+ "syspll3_d4",
-+ "syspll4_d4",
-+ "syspll1_d16"
-+};
-+
-+static const char * const aud_intbus_parents[] = {
-+ "clk26m",
-+ "syspll1_d4",
-+ "syspll4_d2",
-+ "univpll3_d2",
-+ "univpll2_d8",
-+ "syspll3_d2",
-+ "syspll3_d4"
-+};
-+
-+static const char * const pmicspi_parents[] = {
-+ "clk26m",
-+ "syspll1_d8",
-+ "syspll3_d4",
-+ "syspll1_d16",
-+ "univpll3_d4",
-+ "univpll_d26",
-+ "syspll3_d4"
-+};
-+
-+static const char * const dpilvds1_parents[] = {
-+ "clk26m",
-+ "lvdspll2_ck",
-+ "lvdspll2_d2",
-+ "lvdspll2_d4",
-+ "lvdspll2_d8",
-+ "clkfpc"
-+};
-+
-+static const char * const atb_parents[] = {
-+ "clk26m",
-+ "syspll1_d2",
-+ "univpll_d5",
-+ "syspll_d5"
-+};
-+
-+static const char * const nr_parents[] = {
-+ "clk26m",
-+ "univpll1_d4",
-+ "syspll2_d2",
-+ "syspll1_d4",
-+ "univpll1_d8",
-+ "univpll3_d2",
-+ "univpll2_d2",
-+ "syspll_d5"
-+};
-+
-+static const char * const nfi2x_parents[] = {
-+ "clk26m",
-+ "syspll4_d4",
-+ "univpll3_d4",
-+ "univpll1_d8",
-+ "syspll2_d4",
-+ "univpll3_d2",
-+ "syspll_d7",
-+ "syspll2_d2",
-+ "univpll2_d2",
-+ "syspll_d5",
-+ "syspll1_d2"
-+};
-+
-+static const char * const irda_parents[] = {
-+ "clk26m",
-+ "univpll2_d4",
-+ "syspll2_d4",
-+ "univpll2_d8"
-+};
-+
-+static const char * const cci400_parents[] = {
-+ "clk26m",
-+ "vencpll_ck",
-+ "armca35pll_600m",
-+ "armca35pll_400m",
-+ "univpll_d2",
-+ "syspll_d2",
-+ "msdcpll_ck",
-+ "univpll_d3"
-+};
-+
-+static const char * const aud_1_parents[] = {
-+ "clk26m",
-+ "apll1_ck",
-+ "univpll2_d4",
-+ "univpll2_d8"
-+};
-+
-+static const char * const aud_2_parents[] = {
-+ "clk26m",
-+ "apll2_ck",
-+ "univpll2_d4",
-+ "univpll2_d8"
-+};
-+
-+static const char * const mem_mfg_parents[] = {
-+ "clk26m",
-+ "mmpll_ck",
-+ "univpll_d3"
-+};
-+
-+static const char * const axi_mfg_parents[] = {
-+ "clk26m",
-+ "axi_sel",
-+ "univpll_d5"
-+};
-+
-+static const char * const scam_parents[] = {
-+ "clk26m",
-+ "syspll3_d2",
-+ "univpll2_d4",
-+ "syspll2_d4"
-+};
-+
-+static const char * const nfiecc_parents[] = {
-+ "clk26m",
-+ "nfi2x_sel",
-+ "syspll_d7",
-+ "syspll2_d2",
-+ "univpll2_d2",
-+ "univpll_d5",
-+ "syspll1_d2"
-+};
-+
-+static const char * const pe2_mac_p0_parents[] = {
-+ "clk26m",
-+ "syspll1_d8",
-+ "syspll4_d2",
-+ "syspll2_d4",
-+ "univpll2_d4",
-+ "syspll3_d2"
-+};
-+
-+static const char * const dpilvds_parents[] = {
-+ "clk26m",
-+ "lvdspll_ck",
-+ "lvdspll_d2",
-+ "lvdspll_d4",
-+ "lvdspll_d8",
-+ "clkfpc"
-+};
-+
-+static const char * const hdcp_parents[] = {
-+ "clk26m",
-+ "syspll4_d2",
-+ "syspll3_d4",
-+ "univpll2_d4"
-+};
-+
-+static const char * const hdcp_24m_parents[] = {
-+ "clk26m",
-+ "univpll_d26",
-+ "univpll_d52",
-+ "univpll2_d8"
-+};
-+
-+static const char * const rtc_parents[] = {
-+ "clkrtc_int",
-+ "clkrtc_ext",
-+ "clk26m",
-+ "univpll3_d8"
-+};
-+
-+static const char * const spinor_parents[] = {
-+ "clk26m",
-+ "clk26m_d2",
-+ "syspll4_d4",
-+ "univpll2_d8",
-+ "univpll3_d4",
-+ "syspll4_d2",
-+ "syspll2_d4",
-+ "univpll2_d4",
-+ "etherpll_125m",
-+ "syspll1_d4"
-+};
-+
-+static const char * const apll_parents[] = {
-+ "clk26m",
-+ "apll1_ck",
-+ "apll1_d2",
-+ "apll1_d4",
-+ "apll1_d8",
-+ "apll1_d16",
-+ "apll2_ck",
-+ "apll2_d2",
-+ "apll2_d4",
-+ "apll2_d8",
-+ "apll2_d16",
-+ "clk26m",
-+ "clk26m"
-+};
-+
-+static const char * const a1sys_hp_parents[] = {
-+ "clk26m",
-+ "apll1_ck",
-+ "apll1_d2",
-+ "apll1_d4",
-+ "apll1_d8"
-+};
-+
-+static const char * const a2sys_hp_parents[] = {
-+ "clk26m",
-+ "apll2_ck",
-+ "apll2_d2",
-+ "apll2_d4",
-+ "apll2_d8"
-+};
-+
-+static const char * const asm_l_parents[] = {
-+ "clk26m",
-+ "univpll2_d4",
-+ "univpll2_d2",
-+ "syspll_d5"
-+};
-+
-+static const char * const i2so1_parents[] = {
-+ "clk26m",
-+ "apll1_ck",
-+ "apll2_ck"
-+};
-+
-+static const char * const ether_125m_parents[] = {
-+ "clk26m",
-+ "etherpll_125m",
-+ "univpll3_d2"
-+};
-+
-+static const char * const ether_50m_parents[] = {
-+ "clk26m",
-+ "etherpll_50m",
-+ "univpll_d26",
-+ "univpll3_d4"
-+};
-+
-+static const char * const jpgdec_parents[] = {
-+ "clk26m",
-+ "univpll_d3",
-+ "tvdpll_429m",
-+ "vencpll_ck",
-+ "syspll_d3",
-+ "vcodecpll_ck",
-+ "univpll1_d2",
-+ "armca35pll_400m",
-+ "tvdpll_429m_d2",
-+ "tvdpll_429m_d4"
-+};
-+
-+static const char * const spislv_parents[] = {
-+ "clk26m",
-+ "univpll2_d4",
-+ "univpll1_d4",
-+ "univpll2_d2",
-+ "univpll3_d2",
-+ "univpll1_d8",
-+ "univpll1_d2",
-+ "univpll_d5"
-+};
-+
-+static const char * const ether_parents[] = {
-+ "clk26m",
-+ "etherpll_50m",
-+ "univpll_d26"
-+};
-+
-+static const char * const di_parents[] = {
-+ "clk26m",
-+ "tvdpll_d2",
-+ "tvdpll_d4",
-+ "tvdpll_d8",
-+ "vencpll_ck",
-+ "vencpll_d2",
-+ "cvbs",
-+ "cvbs_d2"
-+};
-+
-+static const char * const tvd_parents[] = {
-+ "clk26m",
-+ "cvbs_d2",
-+ "univpll2_d8"
-+};
-+
-+static const char * const i2c_parents[] = {
-+ "clk26m",
-+ "univpll_d26",
-+ "univpll2_d4",
-+ "univpll3_d2",
-+ "univpll1_d4"
-+};
-+
-+static const char * const msdc0p_aes_parents[] = {
-+ "clk26m",
-+ "msdcpll_ck",
-+ "univpll_d3",
-+ "vcodecpll_ck"
-+};
-+
-+static const char * const cmsys_parents[] = {
-+ "clk26m",
-+ "univpll_d3",
-+ "syspll_d3",
-+ "syspll1_d2",
-+ "syspll2_d2"
-+};
-+
-+static const char * const gcpu_parents[] = {
-+ "clk26m",
-+ "syspll_d3",
-+ "syspll1_d2",
-+ "univpll1_d2",
-+ "univpll_d5",
-+ "univpll3_d2",
-+ "univpll_d3"
-+};
-+
-+static const char * const aud_apll1_parents[] = {
-+ "apll1",
-+ "clkaud_ext_i_1"
-+};
-+
-+static const char * const aud_apll2_parents[] = {
-+ "apll2",
-+ "clkaud_ext_i_2"
-+};
-+
-+static const char * const audull_vtx_parents[] = {
-+ "d2a_ulclk_6p5m",
-+ "clkaud_ext_i_0"
-+};
-+
-+static struct mtk_composite top_muxes[] = {
-+ /* CLK_CFG_0 */
-+ MUX_GATE_FLAGS(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, 0x040, 0, 3,
-+ 7, CLK_IS_CRITICAL),
-+ MUX_GATE_FLAGS(CLK_TOP_MEM_SEL, "mem_sel", mem_parents, 0x040, 8, 1,
-+ 15, CLK_IS_CRITICAL),
-+ MUX_GATE(CLK_TOP_MM_SEL, "mm_sel",
-+ mm_parents, 0x040, 24, 3, 31),
-+ /* CLK_CFG_1 */
-+ MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel",
-+ pwm_parents, 0x050, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel",
-+ vdec_parents, 0x050, 8, 4, 15),
-+ MUX_GATE(CLK_TOP_VENC_SEL, "venc_sel",
-+ venc_parents, 0x050, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel",
-+ mfg_parents, 0x050, 24, 4, 31),
-+ /* CLK_CFG_2 */
-+ MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel",
-+ camtg_parents, 0x060, 0, 4, 7),
-+ MUX_GATE(CLK_TOP_UART_SEL, "uart_sel",
-+ uart_parents, 0x060, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_SPI_SEL, "spi_sel",
-+ spi_parents, 0x060, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel",
-+ usb20_parents, 0x060, 24, 2, 31),
-+ /* CLK_CFG_3 */
-+ MUX_GATE(CLK_TOP_USB30_SEL, "usb30_sel",
-+ usb30_parents, 0x070, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_MSDC50_0_HCLK_SEL, "msdc50_0_h_sel",
-+ msdc50_0_h_parents, 0x070, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_MSDC50_0_SEL, "msdc50_0_sel",
-+ msdc50_0_parents, 0x070, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel",
-+ msdc30_1_parents, 0x070, 24, 3, 31),
-+ /* CLK_CFG_4 */
-+ MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel",
-+ msdc30_1_parents, 0x080, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel",
-+ msdc30_3_parents, 0x080, 8, 4, 15),
-+ MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel",
-+ audio_parents, 0x080, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel",
-+ aud_intbus_parents, 0x080, 24, 3, 31),
-+ /* CLK_CFG_5 */
-+ MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel",
-+ pmicspi_parents, 0x090, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_DPILVDS1_SEL, "dpilvds1_sel",
-+ dpilvds1_parents, 0x090, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel",
-+ atb_parents, 0x090, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_NR_SEL, "nr_sel",
-+ nr_parents, 0x090, 24, 3, 31),
-+ /* CLK_CFG_6 */
-+ MUX_GATE(CLK_TOP_NFI2X_SEL, "nfi2x_sel",
-+ nfi2x_parents, 0x0a0, 0, 4, 7),
-+ MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel",
-+ irda_parents, 0x0a0, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel",
-+ cci400_parents, 0x0a0, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel",
-+ aud_1_parents, 0x0a0, 24, 2, 31),
-+ /* CLK_CFG_7 */
-+ MUX_GATE(CLK_TOP_AUD_2_SEL, "aud_2_sel",
-+ aud_2_parents, 0x0b0, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_MEM_MFG_IN_AS_SEL, "mem_mfg_sel",
-+ mem_mfg_parents, 0x0b0, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_AXI_MFG_IN_AS_SEL, "axi_mfg_sel",
-+ axi_mfg_parents, 0x0b0, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_SCAM_SEL, "scam_sel",
-+ scam_parents, 0x0b0, 24, 2, 31),
-+ /* CLK_CFG_8 */
-+ MUX_GATE(CLK_TOP_NFIECC_SEL, "nfiecc_sel",
-+ nfiecc_parents, 0x0c0, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_PE2_MAC_P0_SEL, "pe2_mac_p0_sel",
-+ pe2_mac_p0_parents, 0x0c0, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_PE2_MAC_P1_SEL, "pe2_mac_p1_sel",
-+ pe2_mac_p0_parents, 0x0c0, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_DPILVDS_SEL, "dpilvds_sel",
-+ dpilvds_parents, 0x0c0, 24, 3, 31),
-+ /* CLK_CFG_9 */
-+ MUX_GATE(CLK_TOP_MSDC50_3_HCLK_SEL, "msdc50_3_h_sel",
-+ msdc50_0_h_parents, 0x0d0, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_HDCP_SEL, "hdcp_sel",
-+ hdcp_parents, 0x0d0, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_HDCP_24M_SEL, "hdcp_24m_sel",
-+ hdcp_24m_parents, 0x0d0, 16, 2, 23),
-+ MUX_GATE_FLAGS(CLK_TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x0d0, 24, 2,
-+ 31, CLK_IS_CRITICAL),
-+ /* CLK_CFG_10 */
-+ MUX_GATE(CLK_TOP_SPINOR_SEL, "spinor_sel",
-+ spinor_parents, 0x500, 0, 4, 7),
-+ MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel",
-+ apll_parents, 0x500, 8, 4, 15),
-+ MUX_GATE(CLK_TOP_APLL2_SEL, "apll2_sel",
-+ apll_parents, 0x500, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_A1SYS_HP_SEL, "a1sys_hp_sel",
-+ a1sys_hp_parents, 0x500, 24, 3, 31),
-+ /* CLK_CFG_11 */
-+ MUX_GATE(CLK_TOP_A2SYS_HP_SEL, "a2sys_hp_sel",
-+ a2sys_hp_parents, 0x510, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_ASM_L_SEL, "asm_l_sel",
-+ asm_l_parents, 0x510, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_ASM_M_SEL, "asm_m_sel",
-+ asm_l_parents, 0x510, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_ASM_H_SEL, "asm_h_sel",
-+ asm_l_parents, 0x510, 24, 2, 31),
-+ /* CLK_CFG_12 */
-+ MUX_GATE(CLK_TOP_I2SO1_SEL, "i2so1_sel",
-+ i2so1_parents, 0x520, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_I2SO2_SEL, "i2so2_sel",
-+ i2so1_parents, 0x520, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_I2SO3_SEL, "i2so3_sel",
-+ i2so1_parents, 0x520, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_TDMO0_SEL, "tdmo0_sel",
-+ i2so1_parents, 0x520, 24, 2, 31),
-+ /* CLK_CFG_13 */
-+ MUX_GATE(CLK_TOP_TDMO1_SEL, "tdmo1_sel",
-+ i2so1_parents, 0x530, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_I2SI1_SEL, "i2si1_sel",
-+ i2so1_parents, 0x530, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_I2SI2_SEL, "i2si2_sel",
-+ i2so1_parents, 0x530, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_I2SI3_SEL, "i2si3_sel",
-+ i2so1_parents, 0x530, 24, 2, 31),
-+ /* CLK_CFG_14 */
-+ MUX_GATE(CLK_TOP_ETHER_125M_SEL, "ether_125m_sel",
-+ ether_125m_parents, 0x540, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_ETHER_50M_SEL, "ether_50m_sel",
-+ ether_50m_parents, 0x540, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_JPGDEC_SEL, "jpgdec_sel",
-+ jpgdec_parents, 0x540, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_SPISLV_SEL, "spislv_sel",
-+ spislv_parents, 0x540, 24, 3, 31),
-+ /* CLK_CFG_15 */
-+ MUX_GATE(CLK_TOP_ETHER_50M_RMII_SEL, "ether_sel",
-+ ether_parents, 0x550, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_CAM2TG_SEL, "cam2tg_sel",
-+ camtg_parents, 0x550, 8, 4, 15),
-+ MUX_GATE(CLK_TOP_DI_SEL, "di_sel",
-+ di_parents, 0x550, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_TVD_SEL, "tvd_sel",
-+ tvd_parents, 0x550, 24, 2, 31),
-+ /* CLK_CFG_16 */
-+ MUX_GATE(CLK_TOP_I2C_SEL, "i2c_sel",
-+ i2c_parents, 0x560, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_PWM_INFRA_SEL, "pwm_infra_sel",
-+ pwm_parents, 0x560, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_MSDC0P_AES_SEL, "msdc0p_aes_sel",
-+ msdc0p_aes_parents, 0x560, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_CMSYS_SEL, "cmsys_sel",
-+ cmsys_parents, 0x560, 24, 3, 31),
-+ /* CLK_CFG_17 */
-+ MUX_GATE(CLK_TOP_GCPU_SEL, "gcpu_sel",
-+ gcpu_parents, 0x570, 0, 3, 7),
-+ /* CLK_AUDDIV_4 */
-+ MUX(CLK_TOP_AUD_APLL1_SEL, "aud_apll1_sel",
-+ aud_apll1_parents, 0x134, 0, 1),
-+ MUX(CLK_TOP_AUD_APLL2_SEL, "aud_apll2_sel",
-+ aud_apll2_parents, 0x134, 1, 1),
-+ MUX(CLK_TOP_DA_AUDULL_VTX_6P5M_SEL, "audull_vtx_sel",
-+ audull_vtx_parents, 0x134, 31, 1),
-+};
-+
-+static const char * const mcu_mp0_parents[] = {
-+ "clk26m",
-+ "armca35pll_ck",
-+ "f_mp0_pll1_ck",
-+ "f_mp0_pll2_ck"
-+};
-+
-+static const char * const mcu_mp2_parents[] = {
-+ "clk26m",
-+ "armca72pll_ck",
-+ "f_big_pll1_ck",
-+ "f_big_pll2_ck"
-+};
-+
-+static const char * const mcu_bus_parents[] = {
-+ "clk26m",
-+ "cci400_sel",
-+ "f_bus_pll1_ck",
-+ "f_bus_pll2_ck"
-+};
-+
-+static struct mtk_composite mcu_muxes[] = {
-+ /* mp0_pll_divider_cfg */
-+ MUX_GATE_FLAGS(CLK_MCU_MP0_SEL, "mcu_mp0_sel", mcu_mp0_parents, 0x7A0,
-+ 9, 2, -1, CLK_IS_CRITICAL),
-+ /* mp2_pll_divider_cfg */
-+ MUX_GATE_FLAGS(CLK_MCU_MP2_SEL, "mcu_mp2_sel", mcu_mp2_parents, 0x7A8,
-+ 9, 2, -1, CLK_IS_CRITICAL),
-+ /* bus_pll_divider_cfg */
-+ MUX_GATE_FLAGS(CLK_MCU_BUS_SEL, "mcu_bus_sel", mcu_bus_parents, 0x7C0,
-+ 9, 2, -1, CLK_IS_CRITICAL),
-+};
-+
-+static const struct mtk_clk_divider top_adj_divs[] = {
-+ DIV_ADJ(CLK_TOP_APLL_DIV0, "apll_div0", "i2so1_sel", 0x124, 0, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV1, "apll_div1", "i2so2_sel", 0x124, 8, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV2, "apll_div2", "i2so3_sel", 0x124, 16, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV3, "apll_div3", "tdmo0_sel", 0x124, 24, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV4, "apll_div4", "tdmo1_sel", 0x128, 0, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV5, "apll_div5", "i2si1_sel", 0x128, 8, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV6, "apll_div6", "i2si2_sel", 0x128, 16, 8),
-+ DIV_ADJ(CLK_TOP_APLL_DIV7, "apll_div7", "i2si3_sel", 0x128, 24, 8),
-+};
-+
-+static const struct mtk_gate_regs top_cg_regs = {
-+ .set_ofs = 0x120,
-+ .clr_ofs = 0x120,
-+ .sta_ofs = 0x120,
-+};
-+
-+#define GATE_TOP(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &top_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+static const struct mtk_gate top_clks[] = {
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
-+ GATE_TOP(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
-+};
-+
-+static const struct mtk_gate_regs infra_cg_regs = {
-+ .set_ofs = 0x40,
-+ .clr_ofs = 0x44,
-+ .sta_ofs = 0x40,
-+};
-+
-+#define GATE_INFRA(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &infra_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static const struct mtk_gate infra_clks[] = {
-+ GATE_INFRA(CLK_INFRA_DBGCLK, "infra_dbgclk", "axi_sel", 0),
-+ GATE_INFRA(CLK_INFRA_GCE, "infra_gce", "axi_sel", 6),
-+ GATE_INFRA(CLK_INFRA_M4U, "infra_m4u", "mem_sel", 8),
-+ GATE_INFRA(CLK_INFRA_KP, "infra_kp", "axi_sel", 16),
-+ GATE_INFRA(CLK_INFRA_AO_SPI0, "infra_ao_spi0", "spi_sel", 24),
-+ GATE_INFRA(CLK_INFRA_AO_SPI1, "infra_ao_spi1", "spislv_sel", 25),
-+ GATE_INFRA(CLK_INFRA_AO_UART5, "infra_ao_uart5", "axi_sel", 26),
-+};
-+
-+static const struct mtk_gate_regs peri0_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0x10,
-+ .sta_ofs = 0x18,
-+};
-+
-+static const struct mtk_gate_regs peri1_cg_regs = {
-+ .set_ofs = 0xc,
-+ .clr_ofs = 0x14,
-+ .sta_ofs = 0x1c,
-+};
-+
-+static const struct mtk_gate_regs peri2_cg_regs = {
-+ .set_ofs = 0x42c,
-+ .clr_ofs = 0x42c,
-+ .sta_ofs = 0x42c,
-+};
-+
-+#define GATE_PERI0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_PERI1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_PERI2(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri2_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate peri_clks[] = {
-+ /* PERI0 */
-+ GATE_PERI0(CLK_PERI_NFI, "per_nfi",
-+ "axi_sel", 0),
-+ GATE_PERI0(CLK_PERI_THERM, "per_therm",
-+ "axi_sel", 1),
-+ GATE_PERI0(CLK_PERI_PWM0, "per_pwm0",
-+ "pwm_sel", 2),
-+ GATE_PERI0(CLK_PERI_PWM1, "per_pwm1",
-+ "pwm_sel", 3),
-+ GATE_PERI0(CLK_PERI_PWM2, "per_pwm2",
-+ "pwm_sel", 4),
-+ GATE_PERI0(CLK_PERI_PWM3, "per_pwm3",
-+ "pwm_sel", 5),
-+ GATE_PERI0(CLK_PERI_PWM4, "per_pwm4",
-+ "pwm_sel", 6),
-+ GATE_PERI0(CLK_PERI_PWM5, "per_pwm5",
-+ "pwm_sel", 7),
-+ GATE_PERI0(CLK_PERI_PWM6, "per_pwm6",
-+ "pwm_sel", 8),
-+ GATE_PERI0(CLK_PERI_PWM7, "per_pwm7",
-+ "pwm_sel", 9),
-+ GATE_PERI0(CLK_PERI_PWM, "per_pwm",
-+ "pwm_sel", 10),
-+ GATE_PERI0(CLK_PERI_AP_DMA, "per_ap_dma",
-+ "axi_sel", 13),
-+ GATE_PERI0(CLK_PERI_MSDC30_0, "per_msdc30_0",
-+ "msdc50_0_sel", 14),
-+ GATE_PERI0(CLK_PERI_MSDC30_1, "per_msdc30_1",
-+ "msdc30_1_sel", 15),
-+ GATE_PERI0(CLK_PERI_MSDC30_2, "per_msdc30_2",
-+ "msdc30_2_sel", 16),
-+ GATE_PERI0(CLK_PERI_MSDC30_3, "per_msdc30_3",
-+ "msdc30_3_sel", 17),
-+ GATE_PERI0(CLK_PERI_UART0, "per_uart0",
-+ "uart_sel", 20),
-+ GATE_PERI0(CLK_PERI_UART1, "per_uart1",
-+ "uart_sel", 21),
-+ GATE_PERI0(CLK_PERI_UART2, "per_uart2",
-+ "uart_sel", 22),
-+ GATE_PERI0(CLK_PERI_UART3, "per_uart3",
-+ "uart_sel", 23),
-+ GATE_PERI0(CLK_PERI_I2C0, "per_i2c0",
-+ "axi_sel", 24),
-+ GATE_PERI0(CLK_PERI_I2C1, "per_i2c1",
-+ "axi_sel", 25),
-+ GATE_PERI0(CLK_PERI_I2C2, "per_i2c2",
-+ "axi_sel", 26),
-+ GATE_PERI0(CLK_PERI_I2C3, "per_i2c3",
-+ "axi_sel", 27),
-+ GATE_PERI0(CLK_PERI_I2C4, "per_i2c4",
-+ "axi_sel", 28),
-+ GATE_PERI0(CLK_PERI_AUXADC, "per_auxadc",
-+ "ltepll_fs26m", 29),
-+ GATE_PERI0(CLK_PERI_SPI0, "per_spi0",
-+ "spi_sel", 30),
-+ /* PERI1 */
-+ GATE_PERI1(CLK_PERI_SPI, "per_spi",
-+ "spinor_sel", 1),
-+ GATE_PERI1(CLK_PERI_I2C5, "per_i2c5",
-+ "axi_sel", 3),
-+ GATE_PERI1(CLK_PERI_SPI2, "per_spi2",
-+ "spi_sel", 5),
-+ GATE_PERI1(CLK_PERI_SPI3, "per_spi3",
-+ "spi_sel", 6),
-+ GATE_PERI1(CLK_PERI_SPI5, "per_spi5",
-+ "spi_sel", 8),
-+ GATE_PERI1(CLK_PERI_UART4, "per_uart4",
-+ "uart_sel", 9),
-+ GATE_PERI1(CLK_PERI_SFLASH, "per_sflash",
-+ "uart_sel", 11),
-+ GATE_PERI1(CLK_PERI_GMAC, "per_gmac",
-+ "uart_sel", 12),
-+ GATE_PERI1(CLK_PERI_PCIE0, "per_pcie0",
-+ "uart_sel", 14),
-+ GATE_PERI1(CLK_PERI_PCIE1, "per_pcie1",
-+ "uart_sel", 15),
-+ GATE_PERI1(CLK_PERI_GMAC_PCLK, "per_gmac_pclk",
-+ "uart_sel", 16),
-+ /* PERI2 */
-+ GATE_PERI2(CLK_PERI_MSDC50_0_EN, "per_msdc50_0_en",
-+ "msdc50_0_sel", 0),
-+ GATE_PERI2(CLK_PERI_MSDC30_1_EN, "per_msdc30_1_en",
-+ "msdc30_1_sel", 1),
-+ GATE_PERI2(CLK_PERI_MSDC30_2_EN, "per_msdc30_2_en",
-+ "msdc30_2_sel", 2),
-+ GATE_PERI2(CLK_PERI_MSDC30_3_EN, "per_msdc30_3_en",
-+ "msdc30_3_sel", 3),
-+ GATE_PERI2(CLK_PERI_MSDC50_0_HCLK_EN, "per_msdc50_0_h",
-+ "msdc50_0_h_sel", 4),
-+ GATE_PERI2(CLK_PERI_MSDC50_3_HCLK_EN, "per_msdc50_3_h",
-+ "msdc50_3_h_sel", 5),
-+};
-+
-+#define MT2712_PLL_FMAX (3000UL * MHZ)
-+
-+#define CON0_MT2712_RST_BAR BIT(24)
-+
-+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _tuner_en_reg, \
-+ _tuner_en_bit, _pcw_reg, _pcw_shift, \
-+ _div_table) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .reg = _reg, \
-+ .pwr_reg = _pwr_reg, \
-+ .en_mask = _en_mask, \
-+ .flags = _flags, \
-+ .rst_bar_mask = CON0_MT2712_RST_BAR, \
-+ .fmax = MT2712_PLL_FMAX, \
-+ .pcwbits = _pcwbits, \
-+ .pd_reg = _pd_reg, \
-+ .pd_shift = _pd_shift, \
-+ .tuner_reg = _tuner_reg, \
-+ .tuner_en_reg = _tuner_en_reg, \
-+ .tuner_en_bit = _tuner_en_bit, \
-+ .pcw_reg = _pcw_reg, \
-+ .pcw_shift = _pcw_shift, \
-+ .div_table = _div_table, \
-+ }
-+
-+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _tuner_en_reg, \
-+ _tuner_en_bit, _pcw_reg, _pcw_shift) \
-+ PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, \
-+ _pcwbits, _pd_reg, _pd_shift, _tuner_reg, \
-+ _tuner_en_reg, _tuner_en_bit, _pcw_reg, \
-+ _pcw_shift, NULL)
-+
-+static const struct mtk_pll_div_table armca35pll_div_table[] = {
-+ { .div = 0, .freq = MT2712_PLL_FMAX },
-+ { .div = 1, .freq = 1202500000 },
-+ { .div = 2, .freq = 500500000 },
-+ { .div = 3, .freq = 315250000 },
-+ { .div = 4, .freq = 157625000 },
-+ { } /* sentinel */
-+};
-+
-+static const struct mtk_pll_div_table armca72pll_div_table[] = {
-+ { .div = 0, .freq = MT2712_PLL_FMAX },
-+ { .div = 1, .freq = 994500000 },
-+ { .div = 2, .freq = 520000000 },
-+ { .div = 3, .freq = 315250000 },
-+ { .div = 4, .freq = 157625000 },
-+ { } /* sentinel */
-+};
-+
-+static const struct mtk_pll_div_table mmpll_div_table[] = {
-+ { .div = 0, .freq = MT2712_PLL_FMAX },
-+ { .div = 1, .freq = 1001000000 },
-+ { .div = 2, .freq = 601250000 },
-+ { .div = 3, .freq = 250250000 },
-+ { .div = 4, .freq = 125125000 },
-+ { } /* sentinel */
-+};
-+
-+static const struct mtk_pll_data plls[] = {
-+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x0230, 0x023C, 0xf0000101,
-+ HAVE_RST_BAR, 31, 0x0230, 4, 0, 0, 0, 0x0234, 0),
-+ PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x0240, 0x024C, 0xfe000101,
-+ HAVE_RST_BAR, 31, 0x0240, 4, 0, 0, 0, 0x0244, 0),
-+ PLL(CLK_APMIXED_VCODECPLL, "vcodecpll", 0x0320, 0x032C, 0xc0000101,
-+ 0, 31, 0x0320, 4, 0, 0, 0, 0x0324, 0),
-+ PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x0280, 0x028C, 0x00000101,
-+ 0, 31, 0x0280, 4, 0, 0, 0, 0x0284, 0),
-+ PLL(CLK_APMIXED_APLL1, "apll1", 0x0330, 0x0340, 0x00000101,
-+ 0, 31, 0x0330, 4, 0x0338, 0x0014, 0, 0x0334, 0),
-+ PLL(CLK_APMIXED_APLL2, "apll2", 0x0350, 0x0360, 0x00000101,
-+ 0, 31, 0x0350, 4, 0x0358, 0x0014, 1, 0x0354, 0),
-+ PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x0370, 0x037c, 0x00000101,
-+ 0, 31, 0x0370, 4, 0, 0, 0, 0x0374, 0),
-+ PLL(CLK_APMIXED_LVDSPLL2, "lvdspll2", 0x0390, 0x039C, 0x00000101,
-+ 0, 31, 0x0390, 4, 0, 0, 0, 0x0394, 0),
-+ PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0270, 0x027C, 0x00000101,
-+ 0, 31, 0x0270, 4, 0, 0, 0, 0x0274, 0),
-+ PLL(CLK_APMIXED_MSDCPLL2, "msdcpll2", 0x0410, 0x041C, 0x00000101,
-+ 0, 31, 0x0410, 4, 0, 0, 0, 0x0414, 0),
-+ PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x0290, 0x029C, 0xc0000101,
-+ 0, 31, 0x0290, 4, 0, 0, 0, 0x0294, 0),
-+ PLL_B(CLK_APMIXED_MMPLL, "mmpll", 0x0250, 0x0260, 0x00000101,
-+ 0, 31, 0x0250, 4, 0, 0, 0, 0x0254, 0,
-+ mmpll_div_table),
-+ PLL_B(CLK_APMIXED_ARMCA35PLL, "armca35pll", 0x0100, 0x0110, 0xf0000101,
-+ HAVE_RST_BAR, 31, 0x0100, 4, 0, 0, 0, 0x0104, 0,
-+ armca35pll_div_table),
-+ PLL_B(CLK_APMIXED_ARMCA72PLL, "armca72pll", 0x0210, 0x0220, 0x00000101,
-+ 0, 31, 0x0210, 4, 0, 0, 0, 0x0214, 0,
-+ armca72pll_div_table),
-+ PLL(CLK_APMIXED_ETHERPLL, "etherpll", 0x0300, 0x030C, 0xc0000101,
-+ 0, 31, 0x0300, 4, 0, 0, 0, 0x0304, 0),
-+};
-+
-+static int clk_mt2712_apmixed_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
-+
-+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static struct clk_onecell_data *top_clk_data;
-+
-+static void clk_mt2712_top_init_early(struct device_node *node)
-+{
-+ int r, i;
-+
-+ if (!top_clk_data) {
-+ top_clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
-+
-+ for (i = 0; i < CLK_TOP_NR_CLK; i++)
-+ top_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER);
-+ }
-+
-+ mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs),
-+ top_clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data);
-+ if (r)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+}
-+
-+CLK_OF_DECLARE_DRIVER(mt2712_topckgen, "mediatek,mt2712-topckgen",
-+ clk_mt2712_top_init_early);
-+
-+static int clk_mt2712_top_probe(struct platform_device *pdev)
-+{
-+ int r, i;
-+ struct device_node *node = pdev->dev.of_node;
-+ void __iomem *base;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base)) {
-+ pr_err("%s(): ioremap failed\n", __func__);
-+ return PTR_ERR(base);
-+ }
-+
-+ if (!top_clk_data) {
-+ top_clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
-+ } else {
-+ for (i = 0; i < CLK_TOP_NR_CLK; i++) {
-+ if (top_clk_data->clks[i] == ERR_PTR(-EPROBE_DEFER))
-+ top_clk_data->clks[i] = ERR_PTR(-ENOENT);
-+ }
-+ }
-+
-+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
-+ top_clk_data);
-+ mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs),
-+ top_clk_data);
-+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data);
-+ mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
-+ &mt2712_clk_lock, top_clk_data);
-+ mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
-+ &mt2712_clk_lock, top_clk_data);
-+ mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
-+ top_clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static int clk_mt2712_infra_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
-+
-+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ mtk_register_reset_controller(node, 2, 0x30);
-+
-+ return r;
-+}
-+
-+static int clk_mt2712_peri_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
-+
-+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ mtk_register_reset_controller(node, 2, 0);
-+
-+ return r;
-+}
-+
-+static int clk_mt2712_mcu_probe(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+ void __iomem *base;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base)) {
-+ pr_err("%s(): ioremap failed\n", __func__);
-+ return PTR_ERR(base);
-+ }
-+
-+ clk_data = mtk_alloc_clk_data(CLK_MCU_NR_CLK);
-+
-+ mtk_clk_register_composites(mcu_muxes, ARRAY_SIZE(mcu_muxes), base,
-+ &mt2712_clk_lock, clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ if (r != 0)
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt2712[] = {
-+ {
-+ .compatible = "mediatek,mt2712-apmixedsys",
-+ .data = clk_mt2712_apmixed_probe,
-+ }, {
-+ .compatible = "mediatek,mt2712-topckgen",
-+ .data = clk_mt2712_top_probe,
-+ }, {
-+ .compatible = "mediatek,mt2712-infracfg",
-+ .data = clk_mt2712_infra_probe,
-+ }, {
-+ .compatible = "mediatek,mt2712-pericfg",
-+ .data = clk_mt2712_peri_probe,
-+ }, {
-+ .compatible = "mediatek,mt2712-mcucfg",
-+ .data = clk_mt2712_mcu_probe,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt2712_probe(struct platform_device *pdev)
-+{
-+ int (*clk_probe)(struct platform_device *);
-+ int r;
-+
-+ clk_probe = of_device_get_match_data(&pdev->dev);
-+ if (!clk_probe)
-+ return -EINVAL;
-+
-+ r = clk_probe(pdev);
-+ if (r != 0)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt2712_drv = {
-+ .probe = clk_mt2712_probe,
-+ .driver = {
-+ .name = "clk-mt2712",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_clk_mt2712,
-+ },
-+};
-+
-+static int __init clk_mt2712_init(void)
-+{
-+ return platform_driver_register(&clk_mt2712_drv);
-+}
-+
-+arch_initcall(clk_mt2712_init);
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -207,6 +207,8 @@ struct mtk_pll_data {
- uint32_t en_mask;
- uint32_t pd_reg;
- uint32_t tuner_reg;
-+ uint32_t tuner_en_reg;
-+ uint8_t tuner_en_bit;
- int pd_shift;
- unsigned int flags;
- const struct clk_ops *ops;
---- a/drivers/clk/mediatek/clk-pll.c
-+++ b/drivers/clk/mediatek/clk-pll.c
-@@ -47,6 +47,7 @@ struct mtk_clk_pll {
- void __iomem *pd_addr;
- void __iomem *pwr_addr;
- void __iomem *tuner_addr;
-+ void __iomem *tuner_en_addr;
- void __iomem *pcw_addr;
- const struct mtk_pll_data *data;
- };
-@@ -227,7 +228,10 @@ static int mtk_pll_prepare(struct clk_hw
- r |= pll->data->en_mask;
- writel(r, pll->base_addr + REG_CON0);
-
-- if (pll->tuner_addr) {
-+ if (pll->tuner_en_addr) {
-+ r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit);
-+ writel(r, pll->tuner_en_addr);
-+ } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
-@@ -254,7 +258,10 @@ static void mtk_pll_unprepare(struct clk
- writel(r, pll->base_addr + REG_CON0);
- }
-
-- if (pll->tuner_addr) {
-+ if (pll->tuner_en_addr) {
-+ r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit);
-+ writel(r, pll->tuner_en_addr);
-+ } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
-@@ -297,6 +304,8 @@ static struct clk *mtk_clk_register_pll(
- pll->pcw_addr = base + data->pcw_reg;
- if (data->tuner_reg)
- pll->tuner_addr = base + data->tuner_reg;
-+ if (data->tuner_en_reg)
-+ pll->tuner_en_addr = base + data->tuner_en_reg;
- pll->hw.init = &init;
- pll->data = data;
-
diff --git a/target/linux/mediatek/patches-4.14/0147-dt-bindings-clock-mediatek-document-clk-bindings-for.patch b/target/linux/mediatek/patches-4.14/0147-dt-bindings-clock-mediatek-document-clk-bindings-for.patch
deleted file mode 100644
index 7b2401f525..0000000000
--- a/target/linux/mediatek/patches-4.14/0147-dt-bindings-clock-mediatek-document-clk-bindings-for.patch
+++ /dev/null
@@ -1,190 +0,0 @@
-From acfa4eba7a4391d443b33a3d90a07eae0ef2ebca Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 5 Oct 2017 11:50:22 +0800
-Subject: [PATCH 147/224] dt-bindings: clock: mediatek: document clk bindings
- for MediaTek MT7622 SoC
-
-This patch adds the binding documentation for apmixedsys, ethsys, hifsys,
-infracfg, pericfg, topckgen and audsys for MT7622.
-
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,audsys.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,ethsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,hifsys.txt | 1 +
- .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 +
- .../bindings/arm/mediatek/mediatek,pciesys.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,pericfg.txt | 1 +
- .../bindings/arm/mediatek/mediatek,sgmiisys.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,ssusbsys.txt | 22 ++++++++++++++++++++++
- .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 +
- 10 files changed, 94 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
- create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
-@@ -9,6 +9,7 @@ Required Properties:
- - "mediatek,mt2701-apmixedsys"
- - "mediatek,mt2712-apmixedsys", "syscon"
- - "mediatek,mt6797-apmixedsys"
-+ - "mediatek,mt7622-apmixedsys"
- - "mediatek,mt8135-apmixedsys"
- - "mediatek,mt8173-apmixedsys"
- - #clock-cells: Must be 1
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
-@@ -0,0 +1,22 @@
-+MediaTek AUDSYS controller
-+============================
-+
-+The MediaTek AUDSYS controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be one of:
-+ - "mediatek,mt7622-audsys", "syscon"
-+- #clock-cells: Must be 1
-+
-+The AUDSYS controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+audsys: audsys@11220000 {
-+ compatible = "mediatek,mt7622-audsys", "syscon";
-+ reg = <0 0x11220000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-@@ -7,6 +7,7 @@ Required Properties:
-
- - compatible: Should be:
- - "mediatek,mt2701-ethsys", "syscon"
-+ - "mediatek,mt7622-ethsys", "syscon"
- - #clock-cells: Must be 1
-
- The ethsys controller uses the common clk binding from
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
-@@ -8,6 +8,7 @@ Required Properties:
-
- - compatible: Should be:
- - "mediatek,mt2701-hifsys", "syscon"
-+ - "mediatek,mt7622-hifsys", "syscon"
- - #clock-cells: Must be 1
-
- The hifsys controller uses the common clk binding from
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
-@@ -10,6 +10,7 @@ Required Properties:
- - "mediatek,mt2701-infracfg", "syscon"
- - "mediatek,mt2712-infracfg", "syscon"
- - "mediatek,mt6797-infracfg", "syscon"
-+ - "mediatek,mt7622-infracfg", "syscon"
- - "mediatek,mt8135-infracfg", "syscon"
- - "mediatek,mt8173-infracfg", "syscon"
- - #clock-cells: Must be 1
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
-@@ -0,0 +1,22 @@
-+MediaTek PCIESYS controller
-+============================
-+
-+The MediaTek PCIESYS controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be:
-+ - "mediatek,mt7622-pciesys", "syscon"
-+- #clock-cells: Must be 1
-+
-+The PCIESYS controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+pciesys: pciesys@1a100800 {
-+ compatible = "mediatek,mt7622-pciesys", "syscon";
-+ reg = <0 0x1a100800 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
-@@ -9,6 +9,7 @@ Required Properties:
- - compatible: Should be one of:
- - "mediatek,mt2701-pericfg", "syscon"
- - "mediatek,mt2712-pericfg", "syscon"
-+ - "mediatek,mt7622-pericfg", "syscon"
- - "mediatek,mt8135-pericfg", "syscon"
- - "mediatek,mt8173-pericfg", "syscon"
- - #clock-cells: Must be 1
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-@@ -0,0 +1,22 @@
-+MediaTek SGMIISYS controller
-+============================
-+
-+The MediaTek SGMIISYS controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be:
-+ - "mediatek,mt7622-sgmiisys", "syscon"
-+- #clock-cells: Must be 1
-+
-+The SGMIISYS controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+sgmiisys: sgmiisys@1b128000 {
-+ compatible = "mediatek,mt7622-sgmiisys", "syscon";
-+ reg = <0 0x1b128000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
-@@ -0,0 +1,22 @@
-+MediaTek SSUSBSYS controller
-+============================
-+
-+The MediaTek SSUSBSYS controller provides various clocks to the system.
-+
-+Required Properties:
-+
-+- compatible: Should be:
-+ - "mediatek,mt7622-ssusbsys", "syscon"
-+- #clock-cells: Must be 1
-+
-+The SSUSBSYS controller uses the common clk binding from
-+Documentation/devicetree/bindings/clock/clock-bindings.txt
-+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-+
-+Example:
-+
-+ssusbsys: ssusbsys@1a000000 {
-+ compatible = "mediatek,mt7622-ssusbsys", "syscon";
-+ reg = <0 0x1a000000 0 0x1000>;
-+ #clock-cells = <1>;
-+};
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
-@@ -9,6 +9,7 @@ Required Properties:
- - "mediatek,mt2701-topckgen"
- - "mediatek,mt2712-topckgen", "syscon"
- - "mediatek,mt6797-topckgen"
-+ - "mediatek,mt7622-topckgen"
- - "mediatek,mt8135-topckgen"
- - "mediatek,mt8173-topckgen"
- - #clock-cells: Must be 1
diff --git a/target/linux/mediatek/patches-4.14/0149-clk-mediatek-add-clocks-dt-bindings-required-header-.patch b/target/linux/mediatek/patches-4.14/0149-clk-mediatek-add-clocks-dt-bindings-required-header-.patch
deleted file mode 100644
index d82baa7580..0000000000
--- a/target/linux/mediatek/patches-4.14/0149-clk-mediatek-add-clocks-dt-bindings-required-header-.patch
+++ /dev/null
@@ -1,310 +0,0 @@
-From ea009d063f7a3d70831788046c7285a4af4ab82d Mon Sep 17 00:00:00 2001
-From: Chen Zhong <chen.zhong@mediatek.com>
-Date: Thu, 5 Oct 2017 11:50:25 +0800
-Subject: [PATCH 149/224] clk: mediatek: add clocks dt-bindings required header
- for MT7622 SoC
-
-Add the required header for the entire clocks dt-bindings exported
-from topckgen, apmixedsys, infracfg, pericfg, ethsys, pciesys, ssusbsys
-and audsys which could be found on MT7622 SoC.
-
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- include/dt-bindings/clock/mt7622-clk.h | 289 +++++++++++++++++++++++++++++++++
- 1 file changed, 289 insertions(+)
- create mode 100644 include/dt-bindings/clock/mt7622-clk.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/mt7622-clk.h
-@@ -0,0 +1,289 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Chen Zhong <chen.zhong@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MT7622_H
-+#define _DT_BINDINGS_CLK_MT7622_H
-+
-+/* TOPCKGEN */
-+
-+#define CLK_TOP_TO_U2_PHY 0
-+#define CLK_TOP_TO_U2_PHY_1P 1
-+#define CLK_TOP_PCIE0_PIPE_EN 2
-+#define CLK_TOP_PCIE1_PIPE_EN 3
-+#define CLK_TOP_SSUSB_TX250M 4
-+#define CLK_TOP_SSUSB_EQ_RX250M 5
-+#define CLK_TOP_SSUSB_CDR_REF 6
-+#define CLK_TOP_SSUSB_CDR_FB 7
-+#define CLK_TOP_SATA_ASIC 8
-+#define CLK_TOP_SATA_RBC 9
-+#define CLK_TOP_TO_USB3_SYS 10
-+#define CLK_TOP_P1_1MHZ 11
-+#define CLK_TOP_4MHZ 12
-+#define CLK_TOP_P0_1MHZ 13
-+#define CLK_TOP_TXCLK_SRC_PRE 14
-+#define CLK_TOP_RTC 15
-+#define CLK_TOP_MEMPLL 16
-+#define CLK_TOP_DMPLL 17
-+#define CLK_TOP_SYSPLL_D2 18
-+#define CLK_TOP_SYSPLL1_D2 19
-+#define CLK_TOP_SYSPLL1_D4 20
-+#define CLK_TOP_SYSPLL1_D8 21
-+#define CLK_TOP_SYSPLL2_D4 22
-+#define CLK_TOP_SYSPLL2_D8 23
-+#define CLK_TOP_SYSPLL_D5 24
-+#define CLK_TOP_SYSPLL3_D2 25
-+#define CLK_TOP_SYSPLL3_D4 26
-+#define CLK_TOP_SYSPLL4_D2 27
-+#define CLK_TOP_SYSPLL4_D4 28
-+#define CLK_TOP_SYSPLL4_D16 29
-+#define CLK_TOP_UNIVPLL 30
-+#define CLK_TOP_UNIVPLL_D2 31
-+#define CLK_TOP_UNIVPLL1_D2 32
-+#define CLK_TOP_UNIVPLL1_D4 33
-+#define CLK_TOP_UNIVPLL1_D8 34
-+#define CLK_TOP_UNIVPLL1_D16 35
-+#define CLK_TOP_UNIVPLL2_D2 36
-+#define CLK_TOP_UNIVPLL2_D4 37
-+#define CLK_TOP_UNIVPLL2_D8 38
-+#define CLK_TOP_UNIVPLL2_D16 39
-+#define CLK_TOP_UNIVPLL_D5 40
-+#define CLK_TOP_UNIVPLL3_D2 41
-+#define CLK_TOP_UNIVPLL3_D4 42
-+#define CLK_TOP_UNIVPLL3_D16 43
-+#define CLK_TOP_UNIVPLL_D7 44
-+#define CLK_TOP_UNIVPLL_D80_D4 45
-+#define CLK_TOP_UNIV48M 46
-+#define CLK_TOP_SGMIIPLL 47
-+#define CLK_TOP_SGMIIPLL_D2 48
-+#define CLK_TOP_AUD1PLL 49
-+#define CLK_TOP_AUD2PLL 50
-+#define CLK_TOP_AUD_I2S2_MCK 51
-+#define CLK_TOP_TO_USB3_REF 52
-+#define CLK_TOP_PCIE1_MAC_EN 53
-+#define CLK_TOP_PCIE0_MAC_EN 54
-+#define CLK_TOP_ETH_500M 55
-+#define CLK_TOP_AXI_SEL 56
-+#define CLK_TOP_MEM_SEL 57
-+#define CLK_TOP_DDRPHYCFG_SEL 58
-+#define CLK_TOP_ETH_SEL 59
-+#define CLK_TOP_PWM_SEL 60
-+#define CLK_TOP_F10M_REF_SEL 61
-+#define CLK_TOP_NFI_INFRA_SEL 62
-+#define CLK_TOP_FLASH_SEL 63
-+#define CLK_TOP_UART_SEL 64
-+#define CLK_TOP_SPI0_SEL 65
-+#define CLK_TOP_SPI1_SEL 66
-+#define CLK_TOP_MSDC50_0_SEL 67
-+#define CLK_TOP_MSDC30_0_SEL 68
-+#define CLK_TOP_MSDC30_1_SEL 69
-+#define CLK_TOP_A1SYS_HP_SEL 70
-+#define CLK_TOP_A2SYS_HP_SEL 71
-+#define CLK_TOP_INTDIR_SEL 72
-+#define CLK_TOP_AUD_INTBUS_SEL 73
-+#define CLK_TOP_PMICSPI_SEL 74
-+#define CLK_TOP_SCP_SEL 75
-+#define CLK_TOP_ATB_SEL 76
-+#define CLK_TOP_HIF_SEL 77
-+#define CLK_TOP_AUDIO_SEL 78
-+#define CLK_TOP_U2_SEL 79
-+#define CLK_TOP_AUD1_SEL 80
-+#define CLK_TOP_AUD2_SEL 81
-+#define CLK_TOP_IRRX_SEL 82
-+#define CLK_TOP_IRTX_SEL 83
-+#define CLK_TOP_ASM_L_SEL 84
-+#define CLK_TOP_ASM_M_SEL 85
-+#define CLK_TOP_ASM_H_SEL 86
-+#define CLK_TOP_APLL1_SEL 87
-+#define CLK_TOP_APLL2_SEL 88
-+#define CLK_TOP_I2S0_MCK_SEL 89
-+#define CLK_TOP_I2S1_MCK_SEL 90
-+#define CLK_TOP_I2S2_MCK_SEL 91
-+#define CLK_TOP_I2S3_MCK_SEL 92
-+#define CLK_TOP_APLL1_DIV 93
-+#define CLK_TOP_APLL2_DIV 94
-+#define CLK_TOP_I2S0_MCK_DIV 95
-+#define CLK_TOP_I2S1_MCK_DIV 96
-+#define CLK_TOP_I2S2_MCK_DIV 97
-+#define CLK_TOP_I2S3_MCK_DIV 98
-+#define CLK_TOP_A1SYS_HP_DIV 99
-+#define CLK_TOP_A2SYS_HP_DIV 100
-+#define CLK_TOP_APLL1_DIV_PD 101
-+#define CLK_TOP_APLL2_DIV_PD 102
-+#define CLK_TOP_I2S0_MCK_DIV_PD 103
-+#define CLK_TOP_I2S1_MCK_DIV_PD 104
-+#define CLK_TOP_I2S2_MCK_DIV_PD 105
-+#define CLK_TOP_I2S3_MCK_DIV_PD 106
-+#define CLK_TOP_A1SYS_HP_DIV_PD 107
-+#define CLK_TOP_A2SYS_HP_DIV_PD 108
-+#define CLK_TOP_NR_CLK 109
-+
-+/* INFRACFG */
-+
-+#define CLK_INFRA_MUX1_SEL 0
-+#define CLK_INFRA_DBGCLK_PD 1
-+#define CLK_INFRA_AUDIO_PD 2
-+#define CLK_INFRA_IRRX_PD 3
-+#define CLK_INFRA_APXGPT_PD 4
-+#define CLK_INFRA_PMIC_PD 5
-+#define CLK_INFRA_TRNG 6
-+#define CLK_INFRA_NR_CLK 7
-+
-+/* PERICFG */
-+
-+#define CLK_PERIBUS_SEL 0
-+#define CLK_PERI_THERM_PD 1
-+#define CLK_PERI_PWM1_PD 2
-+#define CLK_PERI_PWM2_PD 3
-+#define CLK_PERI_PWM3_PD 4
-+#define CLK_PERI_PWM4_PD 5
-+#define CLK_PERI_PWM5_PD 6
-+#define CLK_PERI_PWM6_PD 7
-+#define CLK_PERI_PWM7_PD 8
-+#define CLK_PERI_PWM_PD 9
-+#define CLK_PERI_AP_DMA_PD 10
-+#define CLK_PERI_MSDC30_0_PD 11
-+#define CLK_PERI_MSDC30_1_PD 12
-+#define CLK_PERI_UART0_PD 13
-+#define CLK_PERI_UART1_PD 14
-+#define CLK_PERI_UART2_PD 15
-+#define CLK_PERI_UART3_PD 16
-+#define CLK_PERI_UART4_PD 17
-+#define CLK_PERI_BTIF_PD 18
-+#define CLK_PERI_I2C0_PD 19
-+#define CLK_PERI_I2C1_PD 20
-+#define CLK_PERI_I2C2_PD 21
-+#define CLK_PERI_SPI1_PD 22
-+#define CLK_PERI_AUXADC_PD 23
-+#define CLK_PERI_SPI0_PD 24
-+#define CLK_PERI_SNFI_PD 25
-+#define CLK_PERI_NFI_PD 26
-+#define CLK_PERI_NFIECC_PD 27
-+#define CLK_PERI_FLASH_PD 28
-+#define CLK_PERI_IRTX_PD 29
-+#define CLK_PERI_NR_CLK 30
-+
-+/* APMIXEDSYS */
-+
-+#define CLK_APMIXED_ARMPLL 0
-+#define CLK_APMIXED_MAINPLL 1
-+#define CLK_APMIXED_UNIV2PLL 2
-+#define CLK_APMIXED_ETH1PLL 3
-+#define CLK_APMIXED_ETH2PLL 4
-+#define CLK_APMIXED_AUD1PLL 5
-+#define CLK_APMIXED_AUD2PLL 6
-+#define CLK_APMIXED_TRGPLL 7
-+#define CLK_APMIXED_SGMIPLL 8
-+#define CLK_APMIXED_MAIN_CORE_EN 9
-+#define CLK_APMIXED_NR_CLK 10
-+
-+/* AUDIOSYS */
-+
-+#define CLK_AUDIO_AFE 0
-+#define CLK_AUDIO_HDMI 1
-+#define CLK_AUDIO_SPDF 2
-+#define CLK_AUDIO_APLL 3
-+#define CLK_AUDIO_I2SIN1 4
-+#define CLK_AUDIO_I2SIN2 5
-+#define CLK_AUDIO_I2SIN3 6
-+#define CLK_AUDIO_I2SIN4 7
-+#define CLK_AUDIO_I2SO1 8
-+#define CLK_AUDIO_I2SO2 9
-+#define CLK_AUDIO_I2SO3 10
-+#define CLK_AUDIO_I2SO4 11
-+#define CLK_AUDIO_ASRCI1 12
-+#define CLK_AUDIO_ASRCI2 13
-+#define CLK_AUDIO_ASRCO1 14
-+#define CLK_AUDIO_ASRCO2 15
-+#define CLK_AUDIO_INTDIR 16
-+#define CLK_AUDIO_A1SYS 17
-+#define CLK_AUDIO_A2SYS 18
-+#define CLK_AUDIO_UL1 19
-+#define CLK_AUDIO_UL2 20
-+#define CLK_AUDIO_UL3 21
-+#define CLK_AUDIO_UL4 22
-+#define CLK_AUDIO_UL5 23
-+#define CLK_AUDIO_UL6 24
-+#define CLK_AUDIO_DL1 25
-+#define CLK_AUDIO_DL2 26
-+#define CLK_AUDIO_DL3 27
-+#define CLK_AUDIO_DL4 28
-+#define CLK_AUDIO_DL5 29
-+#define CLK_AUDIO_DL6 30
-+#define CLK_AUDIO_DLMCH 31
-+#define CLK_AUDIO_ARB1 32
-+#define CLK_AUDIO_AWB 33
-+#define CLK_AUDIO_AWB2 34
-+#define CLK_AUDIO_DAI 35
-+#define CLK_AUDIO_MOD 36
-+#define CLK_AUDIO_ASRCI3 37
-+#define CLK_AUDIO_ASRCI4 38
-+#define CLK_AUDIO_ASRCO3 39
-+#define CLK_AUDIO_ASRCO4 40
-+#define CLK_AUDIO_MEM_ASRC1 41
-+#define CLK_AUDIO_MEM_ASRC2 42
-+#define CLK_AUDIO_MEM_ASRC3 43
-+#define CLK_AUDIO_MEM_ASRC4 44
-+#define CLK_AUDIO_MEM_ASRC5 45
-+#define CLK_AUDIO_NR_CLK 46
-+
-+/* SSUSBSYS */
-+
-+#define CLK_SSUSB_U2_PHY_1P_EN 0
-+#define CLK_SSUSB_U2_PHY_EN 1
-+#define CLK_SSUSB_REF_EN 2
-+#define CLK_SSUSB_SYS_EN 3
-+#define CLK_SSUSB_MCU_EN 4
-+#define CLK_SSUSB_DMA_EN 5
-+#define CLK_SSUSB_NR_CLK 6
-+
-+/* PCIESYS */
-+
-+#define CLK_PCIE_P1_AUX_EN 0
-+#define CLK_PCIE_P1_OBFF_EN 1
-+#define CLK_PCIE_P1_AHB_EN 2
-+#define CLK_PCIE_P1_AXI_EN 3
-+#define CLK_PCIE_P1_MAC_EN 4
-+#define CLK_PCIE_P1_PIPE_EN 5
-+#define CLK_PCIE_P0_AUX_EN 6
-+#define CLK_PCIE_P0_OBFF_EN 7
-+#define CLK_PCIE_P0_AHB_EN 8
-+#define CLK_PCIE_P0_AXI_EN 9
-+#define CLK_PCIE_P0_MAC_EN 10
-+#define CLK_PCIE_P0_PIPE_EN 11
-+#define CLK_SATA_AHB_EN 12
-+#define CLK_SATA_AXI_EN 13
-+#define CLK_SATA_ASIC_EN 14
-+#define CLK_SATA_RBC_EN 15
-+#define CLK_SATA_PM_EN 16
-+#define CLK_PCIE_NR_CLK 17
-+
-+/* ETHSYS */
-+
-+#define CLK_ETH_HSDMA_EN 0
-+#define CLK_ETH_ESW_EN 1
-+#define CLK_ETH_GP2_EN 2
-+#define CLK_ETH_GP1_EN 3
-+#define CLK_ETH_GP0_EN 4
-+#define CLK_ETH_NR_CLK 5
-+
-+/* SGMIISYS */
-+
-+#define CLK_SGMII_TX250M_EN 0
-+#define CLK_SGMII_RX250M_EN 1
-+#define CLK_SGMII_CDR_REF 2
-+#define CLK_SGMII_CDR_FB 3
-+#define CLK_SGMII_NR_CLK 4
-+
-+#endif /* _DT_BINDINGS_CLK_MT7622_H */
-+
diff --git a/target/linux/mediatek/patches-4.14/0150-clk-mediatek-add-clock-support-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0150-clk-mediatek-add-clock-support-for-MT7622-SoC.patch
deleted file mode 100644
index e993106feb..0000000000
--- a/target/linux/mediatek/patches-4.14/0150-clk-mediatek-add-clock-support-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,1388 +0,0 @@
-From b24e830d69f1fa637284c093410645a059b60028 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 5 Oct 2017 11:50:24 +0800
-Subject: [PATCH 150/224] clk: mediatek: add clock support for MT7622 SoC
-
-Add all supported clocks exported from every susbystem found on MT7622 SoC
-such as topckgen, apmixedsys, infracfg, pericfg , pciessys, ssusbsys,
-ethsys and audsys.
-
-Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mediatek/Kconfig | 30 ++
- drivers/clk/mediatek/Makefile | 4 +
- drivers/clk/mediatek/clk-mt7622-aud.c | 195 +++++++++
- drivers/clk/mediatek/clk-mt7622-eth.c | 156 +++++++
- drivers/clk/mediatek/clk-mt7622-hif.c | 169 ++++++++
- drivers/clk/mediatek/clk-mt7622.c | 780 ++++++++++++++++++++++++++++++++++
- 6 files changed, 1334 insertions(+)
- create mode 100644 drivers/clk/mediatek/clk-mt7622-aud.c
- create mode 100644 drivers/clk/mediatek/clk-mt7622-eth.c
- create mode 100644 drivers/clk/mediatek/clk-mt7622-hif.c
- create mode 100644 drivers/clk/mediatek/clk-mt7622.c
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -132,6 +132,36 @@ config COMMON_CLK_MT6797_VENCSYS
- ---help---
- This driver supports Mediatek MT6797 vencsys clocks.
-
-+config COMMON_CLK_MT7622
-+ bool "Clock driver for MediaTek MT7622"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+ select COMMON_CLK_MEDIATEK
-+ default ARCH_MEDIATEK
-+ ---help---
-+ This driver supports MediaTek MT7622 basic clocks and clocks
-+ required for various periperals found on MediaTek.
-+
-+config COMMON_CLK_MT7622_ETHSYS
-+ bool "Clock driver for MediaTek MT7622 ETHSYS"
-+ depends on COMMON_CLK_MT7622
-+ ---help---
-+ This driver add support for clocks for Ethernet and SGMII
-+ required on MediaTek MT7622 SoC.
-+
-+config COMMON_CLK_MT7622_HIFSYS
-+ bool "Clock driver for MediaTek MT7622 HIFSYS"
-+ depends on COMMON_CLK_MT7622
-+ ---help---
-+ This driver supports MediaTek MT7622 HIFSYS clocks providing
-+ to PCI-E and USB.
-+
-+config COMMON_CLK_MT7622_AUDSYS
-+ bool "Clock driver for MediaTek MT7622 AUDSYS"
-+ depends on COMMON_CLK_MT7622
-+ ---help---
-+ This driver supports MediaTek MT7622 AUDSYS clocks providing
-+ to audio consumers such as I2S and TDM.
-+
- config COMMON_CLK_MT8135
- bool "Clock driver for Mediatek MT8135"
- depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -21,5 +21,9 @@ obj-$(CONFIG_COMMON_CLK_MT2712_MFGCFG) +
- obj-$(CONFIG_COMMON_CLK_MT2712_MMSYS) += clk-mt2712-mm.o
- obj-$(CONFIG_COMMON_CLK_MT2712_VDECSYS) += clk-mt2712-vdec.o
- obj-$(CONFIG_COMMON_CLK_MT2712_VENCSYS) += clk-mt2712-venc.o
-+obj-$(CONFIG_COMMON_CLK_MT7622) += clk-mt7622.o
-+obj-$(CONFIG_COMMON_CLK_MT7622_ETHSYS) += clk-mt7622-eth.o
-+obj-$(CONFIG_COMMON_CLK_MT7622_HIFSYS) += clk-mt7622-hif.o
-+obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) += clk-mt7622-aud.o
- obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
- obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -0,0 +1,195 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Chen Zhong <chen.zhong@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt7622-clk.h>
-+
-+#define GATE_AUDIO0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &audio0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+#define GATE_AUDIO1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &audio1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+#define GATE_AUDIO2(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &audio2_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+#define GATE_AUDIO3(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &audio3_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+static const struct mtk_gate_regs audio0_cg_regs = {
-+ .set_ofs = 0x0,
-+ .clr_ofs = 0x0,
-+ .sta_ofs = 0x0,
-+};
-+
-+static const struct mtk_gate_regs audio1_cg_regs = {
-+ .set_ofs = 0x10,
-+ .clr_ofs = 0x10,
-+ .sta_ofs = 0x10,
-+};
-+
-+static const struct mtk_gate_regs audio2_cg_regs = {
-+ .set_ofs = 0x14,
-+ .clr_ofs = 0x14,
-+ .sta_ofs = 0x14,
-+};
-+
-+static const struct mtk_gate_regs audio3_cg_regs = {
-+ .set_ofs = 0x634,
-+ .clr_ofs = 0x634,
-+ .sta_ofs = 0x634,
-+};
-+
-+static const struct mtk_gate audio_clks[] = {
-+ /* AUDIO0 */
-+ GATE_AUDIO0(CLK_AUDIO_AFE, "audio_afe", "rtc", 2),
-+ GATE_AUDIO0(CLK_AUDIO_HDMI, "audio_hdmi", "apll1_ck_sel", 20),
-+ GATE_AUDIO0(CLK_AUDIO_SPDF, "audio_spdf", "apll1_ck_sel", 21),
-+ GATE_AUDIO0(CLK_AUDIO_APLL, "audio_apll", "apll1_ck_sel", 23),
-+ /* AUDIO1 */
-+ GATE_AUDIO1(CLK_AUDIO_I2SIN1, "audio_i2sin1", "a1sys_hp_sel", 0),
-+ GATE_AUDIO1(CLK_AUDIO_I2SIN2, "audio_i2sin2", "a1sys_hp_sel", 1),
-+ GATE_AUDIO1(CLK_AUDIO_I2SIN3, "audio_i2sin3", "a1sys_hp_sel", 2),
-+ GATE_AUDIO1(CLK_AUDIO_I2SIN4, "audio_i2sin4", "a1sys_hp_sel", 3),
-+ GATE_AUDIO1(CLK_AUDIO_I2SO1, "audio_i2so1", "a1sys_hp_sel", 6),
-+ GATE_AUDIO1(CLK_AUDIO_I2SO2, "audio_i2so2", "a1sys_hp_sel", 7),
-+ GATE_AUDIO1(CLK_AUDIO_I2SO3, "audio_i2so3", "a1sys_hp_sel", 8),
-+ GATE_AUDIO1(CLK_AUDIO_I2SO4, "audio_i2so4", "a1sys_hp_sel", 9),
-+ GATE_AUDIO1(CLK_AUDIO_ASRCI1, "audio_asrci1", "asm_h_sel", 12),
-+ GATE_AUDIO1(CLK_AUDIO_ASRCI2, "audio_asrci2", "asm_h_sel", 13),
-+ GATE_AUDIO1(CLK_AUDIO_ASRCO1, "audio_asrco1", "asm_h_sel", 14),
-+ GATE_AUDIO1(CLK_AUDIO_ASRCO2, "audio_asrco2", "asm_h_sel", 15),
-+ GATE_AUDIO1(CLK_AUDIO_INTDIR, "audio_intdir", "intdir_sel", 20),
-+ GATE_AUDIO1(CLK_AUDIO_A1SYS, "audio_a1sys", "a1sys_hp_sel", 21),
-+ GATE_AUDIO1(CLK_AUDIO_A2SYS, "audio_a2sys", "a2sys_hp_sel", 22),
-+ /* AUDIO2 */
-+ GATE_AUDIO2(CLK_AUDIO_UL1, "audio_ul1", "a1sys_hp_sel", 0),
-+ GATE_AUDIO2(CLK_AUDIO_UL2, "audio_ul2", "a1sys_hp_sel", 1),
-+ GATE_AUDIO2(CLK_AUDIO_UL3, "audio_ul3", "a1sys_hp_sel", 2),
-+ GATE_AUDIO2(CLK_AUDIO_UL4, "audio_ul4", "a1sys_hp_sel", 3),
-+ GATE_AUDIO2(CLK_AUDIO_UL5, "audio_ul5", "a1sys_hp_sel", 4),
-+ GATE_AUDIO2(CLK_AUDIO_UL6, "audio_ul6", "a1sys_hp_sel", 5),
-+ GATE_AUDIO2(CLK_AUDIO_DL1, "audio_dl1", "a1sys_hp_sel", 6),
-+ GATE_AUDIO2(CLK_AUDIO_DL2, "audio_dl2", "a1sys_hp_sel", 7),
-+ GATE_AUDIO2(CLK_AUDIO_DL3, "audio_dl3", "a1sys_hp_sel", 8),
-+ GATE_AUDIO2(CLK_AUDIO_DL4, "audio_dl4", "a1sys_hp_sel", 9),
-+ GATE_AUDIO2(CLK_AUDIO_DL5, "audio_dl5", "a1sys_hp_sel", 10),
-+ GATE_AUDIO2(CLK_AUDIO_DL6, "audio_dl6", "a1sys_hp_sel", 11),
-+ GATE_AUDIO2(CLK_AUDIO_DLMCH, "audio_dlmch", "a1sys_hp_sel", 12),
-+ GATE_AUDIO2(CLK_AUDIO_ARB1, "audio_arb1", "a1sys_hp_sel", 13),
-+ GATE_AUDIO2(CLK_AUDIO_AWB, "audio_awb", "a1sys_hp_sel", 14),
-+ GATE_AUDIO2(CLK_AUDIO_AWB2, "audio_awb2", "a1sys_hp_sel", 15),
-+ GATE_AUDIO2(CLK_AUDIO_DAI, "audio_dai", "a1sys_hp_sel", 16),
-+ GATE_AUDIO2(CLK_AUDIO_MOD, "audio_mod", "a1sys_hp_sel", 17),
-+ /* AUDIO3 */
-+ GATE_AUDIO3(CLK_AUDIO_ASRCI3, "audio_asrci3", "asm_h_sel", 2),
-+ GATE_AUDIO3(CLK_AUDIO_ASRCI4, "audio_asrci4", "asm_h_sel", 3),
-+ GATE_AUDIO3(CLK_AUDIO_ASRCO3, "audio_asrco3", "asm_h_sel", 6),
-+ GATE_AUDIO3(CLK_AUDIO_ASRCO4, "audio_asrco4", "asm_h_sel", 7),
-+ GATE_AUDIO3(CLK_AUDIO_MEM_ASRC1, "audio_mem_asrc1", "asm_h_sel", 10),
-+ GATE_AUDIO3(CLK_AUDIO_MEM_ASRC2, "audio_mem_asrc2", "asm_h_sel", 11),
-+ GATE_AUDIO3(CLK_AUDIO_MEM_ASRC3, "audio_mem_asrc3", "asm_h_sel", 12),
-+ GATE_AUDIO3(CLK_AUDIO_MEM_ASRC4, "audio_mem_asrc4", "asm_h_sel", 13),
-+ GATE_AUDIO3(CLK_AUDIO_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
-+};
-+
-+static int clk_mt7622_audiosys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
-+
-+ mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7622_aud[] = {
-+ {
-+ .compatible = "mediatek,mt7622-audsys",
-+ .data = clk_mt7622_audiosys_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7622_aud_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7622_aud_drv = {
-+ .probe = clk_mt7622_aud_probe,
-+ .driver = {
-+ .name = "clk-mt7622-aud",
-+ .of_match_table = of_match_clk_mt7622_aud,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt7622_aud_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7622-eth.c
-@@ -0,0 +1,156 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Chen Zhong <chen.zhong@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt7622-clk.h>
-+
-+#define GATE_ETH(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &eth_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate_regs eth_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate eth_clks[] = {
-+ GATE_ETH(CLK_ETH_HSDMA_EN, "eth_hsdma_en", "eth_sel", 5),
-+ GATE_ETH(CLK_ETH_ESW_EN, "eth_esw_en", "eth_500m", 6),
-+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "txclk_src_pre", 7),
-+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "txclk_src_pre", 8),
-+ GATE_ETH(CLK_ETH_GP0_EN, "eth_gp0_en", "txclk_src_pre", 9),
-+};
-+
-+static const struct mtk_gate_regs sgmii_cg_regs = {
-+ .set_ofs = 0xE4,
-+ .clr_ofs = 0xE4,
-+ .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &sgmii_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate sgmii_clks[] = {
-+ GATE_SGMII(CLK_SGMII_TX250M_EN, "sgmii_tx250m_en",
-+ "ssusb_tx250m", 2),
-+ GATE_SGMII(CLK_SGMII_RX250M_EN, "sgmii_rx250m_en",
-+ "ssusb_eq_rx250m", 3),
-+ GATE_SGMII(CLK_SGMII_CDR_REF, "sgmii_cdr_ref",
-+ "ssusb_cdr_ref", 4),
-+ GATE_SGMII(CLK_SGMII_CDR_FB, "sgmii_cdr_fb",
-+ "ssusb_cdr_fb", 5),
-+};
-+
-+static int clk_mt7622_ethsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
-+
-+ mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static int clk_mt7622_sgmiisys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
-+
-+ mtk_clk_register_gates(node, sgmii_clks, ARRAY_SIZE(sgmii_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7622_eth[] = {
-+ {
-+ .compatible = "mediatek,mt7622-ethsys",
-+ .data = clk_mt7622_ethsys_init,
-+ }, {
-+ .compatible = "mediatek,mt7622-sgmiisys",
-+ .data = clk_mt7622_sgmiisys_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7622_eth_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7622_eth_drv = {
-+ .probe = clk_mt7622_eth_probe,
-+ .driver = {
-+ .name = "clk-mt7622-eth",
-+ .of_match_table = of_match_clk_mt7622_eth,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt7622_eth_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7622-hif.c
-@@ -0,0 +1,169 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Chen Zhong <chen.zhong@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt7622-clk.h>
-+
-+#define GATE_PCIE(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &pcie_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+#define GATE_SSUSB(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &ssusb_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate_regs pcie_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate_regs ssusb_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate ssusb_clks[] = {
-+ GATE_SSUSB(CLK_SSUSB_U2_PHY_1P_EN, "ssusb_u2_phy_1p",
-+ "to_u2_phy_1p", 0),
-+ GATE_SSUSB(CLK_SSUSB_U2_PHY_EN, "ssusb_u2_phy_en", "to_u2_phy", 1),
-+ GATE_SSUSB(CLK_SSUSB_REF_EN, "ssusb_ref_en", "to_usb3_ref", 5),
-+ GATE_SSUSB(CLK_SSUSB_SYS_EN, "ssusb_sys_en", "to_usb3_sys", 6),
-+ GATE_SSUSB(CLK_SSUSB_MCU_EN, "ssusb_mcu_en", "axi_sel", 7),
-+ GATE_SSUSB(CLK_SSUSB_DMA_EN, "ssusb_dma_en", "hif_sel", 8),
-+};
-+
-+static const struct mtk_gate pcie_clks[] = {
-+ GATE_PCIE(CLK_PCIE_P1_AUX_EN, "pcie_p1_aux_en", "p1_1mhz", 12),
-+ GATE_PCIE(CLK_PCIE_P1_OBFF_EN, "pcie_p1_obff_en", "free_run_4mhz", 13),
-+ GATE_PCIE(CLK_PCIE_P1_AHB_EN, "pcie_p1_ahb_en", "axi_sel", 14),
-+ GATE_PCIE(CLK_PCIE_P1_AXI_EN, "pcie_p1_axi_en", "hif_sel", 15),
-+ GATE_PCIE(CLK_PCIE_P1_MAC_EN, "pcie_p1_mac_en", "pcie1_mac_en", 16),
-+ GATE_PCIE(CLK_PCIE_P1_PIPE_EN, "pcie_p1_pipe_en", "pcie1_pipe_en", 17),
-+ GATE_PCIE(CLK_PCIE_P0_AUX_EN, "pcie_p0_aux_en", "p0_1mhz", 18),
-+ GATE_PCIE(CLK_PCIE_P0_OBFF_EN, "pcie_p0_obff_en", "free_run_4mhz", 19),
-+ GATE_PCIE(CLK_PCIE_P0_AHB_EN, "pcie_p0_ahb_en", "axi_sel", 20),
-+ GATE_PCIE(CLK_PCIE_P0_AXI_EN, "pcie_p0_axi_en", "hif_sel", 21),
-+ GATE_PCIE(CLK_PCIE_P0_MAC_EN, "pcie_p0_mac_en", "pcie0_mac_en", 22),
-+ GATE_PCIE(CLK_PCIE_P0_PIPE_EN, "pcie_p0_pipe_en", "pcie0_pipe_en", 23),
-+ GATE_PCIE(CLK_SATA_AHB_EN, "sata_ahb_en", "axi_sel", 26),
-+ GATE_PCIE(CLK_SATA_AXI_EN, "sata_axi_en", "hif_sel", 27),
-+ GATE_PCIE(CLK_SATA_ASIC_EN, "sata_asic_en", "sata_asic", 28),
-+ GATE_PCIE(CLK_SATA_RBC_EN, "sata_rbc_en", "sata_rbc", 29),
-+ GATE_PCIE(CLK_SATA_PM_EN, "sata_pm_en", "univpll2_d4", 30),
-+};
-+
-+static int clk_mt7622_ssusbsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
-+
-+ mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static int clk_mt7622_pciesys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
-+
-+ mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7622_hif[] = {
-+ {
-+ .compatible = "mediatek,mt7622-pciesys",
-+ .data = clk_mt7622_pciesys_init,
-+ }, {
-+ .compatible = "mediatek,mt7622-ssusbsys",
-+ .data = clk_mt7622_ssusbsys_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7622_hif_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7622_hif_drv = {
-+ .probe = clk_mt7622_hif_probe,
-+ .driver = {
-+ .name = "clk-mt7622-hif",
-+ .of_match_table = of_match_clk_mt7622_hif,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt7622_hif_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -0,0 +1,780 @@
-+/*
-+ * Copyright (c) 2017 MediaTek Inc.
-+ * Author: Chen Zhong <chen.zhong@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-cpumux.h"
-+
-+#include <dt-bindings/clock/mt7622-clk.h>
-+#include <linux/clk.h> /* for consumer */
-+
-+#define MT7622_PLL_FMAX (2500UL * MHZ)
-+#define CON0_MT7622_RST_BAR BIT(27)
-+
-+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,\
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
-+ _pcw_shift, _div_table, _parent_name) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .reg = _reg, \
-+ .pwr_reg = _pwr_reg, \
-+ .en_mask = _en_mask, \
-+ .flags = _flags, \
-+ .rst_bar_mask = CON0_MT7622_RST_BAR, \
-+ .fmax = MT7622_PLL_FMAX, \
-+ .pcwbits = _pcwbits, \
-+ .pd_reg = _pd_reg, \
-+ .pd_shift = _pd_shift, \
-+ .tuner_reg = _tuner_reg, \
-+ .pcw_reg = _pcw_reg, \
-+ .pcw_shift = _pcw_shift, \
-+ .div_table = _div_table, \
-+ .parent_name = _parent_name, \
-+ }
-+
-+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
-+ _pcw_shift) \
-+ PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,\
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
-+ NULL, "clkxtal")
-+
-+#define GATE_APMIXED(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &apmixed_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+#define GATE_INFRA(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &infra_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_TOP0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &top0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+#define GATE_TOP1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &top1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr, \
-+ }
-+
-+#define GATE_PERI0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_PERI1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static DEFINE_SPINLOCK(mt7622_clk_lock);
-+
-+static const char * const infra_mux1_parents[] = {
-+ "clkxtal",
-+ "armpll",
-+ "main_core_en",
-+ "armpll"
-+};
-+
-+static const char * const axi_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "syspll_d5",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "univpll2_d2",
-+ "univpll_d7"
-+};
-+
-+static const char * const mem_parents[] = {
-+ "clkxtal",
-+ "dmpll_ck"
-+};
-+
-+static const char * const ddrphycfg_parents[] = {
-+ "clkxtal",
-+ "syspll1_d8"
-+};
-+
-+static const char * const eth_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "univpll1_d2",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "clk_null",
-+ "univpll_d7"
-+};
-+
-+static const char * const pwm_parents[] = {
-+ "clkxtal",
-+ "univpll2_d4"
-+};
-+
-+static const char * const f10m_ref_parents[] = {
-+ "clkxtal",
-+ "syspll4_d16"
-+};
-+
-+static const char * const nfi_infra_parents[] = {
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "univpll2_d8",
-+ "syspll1_d8",
-+ "univpll1_d8",
-+ "syspll4_d2",
-+ "univpll2_d4",
-+ "univpll3_d2",
-+ "syspll1_d4"
-+};
-+
-+static const char * const flash_parents[] = {
-+ "clkxtal",
-+ "univpll_d80_d4",
-+ "syspll2_d8",
-+ "syspll3_d4",
-+ "univpll3_d4",
-+ "univpll1_d8",
-+ "syspll2_d4",
-+ "univpll2_d4"
-+};
-+
-+static const char * const uart_parents[] = {
-+ "clkxtal",
-+ "univpll2_d8"
-+};
-+
-+static const char * const spi0_parents[] = {
-+ "clkxtal",
-+ "syspll3_d2",
-+ "clkxtal",
-+ "syspll2_d4",
-+ "syspll4_d2",
-+ "univpll2_d4",
-+ "univpll1_d8",
-+ "clkxtal"
-+};
-+
-+static const char * const spi1_parents[] = {
-+ "clkxtal",
-+ "syspll3_d2",
-+ "clkxtal",
-+ "syspll4_d4",
-+ "syspll4_d2",
-+ "univpll2_d4",
-+ "univpll1_d8",
-+ "clkxtal"
-+};
-+
-+static const char * const msdc30_0_parents[] = {
-+ "clkxtal",
-+ "univpll2_d16",
-+ "univ48m"
-+};
-+
-+static const char * const a1sys_hp_parents[] = {
-+ "clkxtal",
-+ "aud1pll_ck",
-+ "aud2pll_ck",
-+ "clkxtal"
-+};
-+
-+static const char * const intdir_parents[] = {
-+ "clkxtal",
-+ "syspll_d2",
-+ "univpll_d2",
-+ "sgmiipll_ck"
-+};
-+
-+static const char * const aud_intbus_parents[] = {
-+ "clkxtal",
-+ "syspll1_d4",
-+ "syspll4_d2",
-+ "syspll3_d2"
-+};
-+
-+static const char * const pmicspi_parents[] = {
-+ "clkxtal",
-+ "clk_null",
-+ "clk_null",
-+ "clk_null",
-+ "clk_null",
-+ "univpll2_d16"
-+};
-+
-+static const char * const atb_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "syspll_d5"
-+};
-+
-+static const char * const audio_parents[] = {
-+ "clkxtal",
-+ "syspll3_d4",
-+ "syspll4_d4",
-+ "univpll1_d16"
-+};
-+
-+static const char * const usb20_parents[] = {
-+ "clkxtal",
-+ "univpll3_d4",
-+ "syspll1_d8",
-+ "clkxtal"
-+};
-+
-+static const char * const aud1_parents[] = {
-+ "clkxtal",
-+ "aud1pll_ck"
-+};
-+
-+static const char * const aud2_parents[] = {
-+ "clkxtal",
-+ "aud2pll_ck"
-+};
-+
-+static const char * const asm_l_parents[] = {
-+ "clkxtal",
-+ "syspll_d5",
-+ "univpll2_d2",
-+ "univpll2_d4"
-+};
-+
-+static const char * const apll1_ck_parents[] = {
-+ "aud1_sel",
-+ "aud2_sel"
-+};
-+
-+static const char * const peribus_ck_parents[] = {
-+ "syspll1_d8",
-+ "syspll1_d4"
-+};
-+
-+static const struct mtk_gate_regs apmixed_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0x8,
-+ .sta_ofs = 0x8,
-+};
-+
-+static const struct mtk_gate_regs infra_cg_regs = {
-+ .set_ofs = 0x40,
-+ .clr_ofs = 0x44,
-+ .sta_ofs = 0x48,
-+};
-+
-+static const struct mtk_gate_regs top0_cg_regs = {
-+ .set_ofs = 0x120,
-+ .clr_ofs = 0x120,
-+ .sta_ofs = 0x120,
-+};
-+
-+static const struct mtk_gate_regs top1_cg_regs = {
-+ .set_ofs = 0x128,
-+ .clr_ofs = 0x128,
-+ .sta_ofs = 0x128,
-+};
-+
-+static const struct mtk_gate_regs peri0_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0x10,
-+ .sta_ofs = 0x18,
-+};
-+
-+static const struct mtk_gate_regs peri1_cg_regs = {
-+ .set_ofs = 0xC,
-+ .clr_ofs = 0x14,
-+ .sta_ofs = 0x1C,
-+};
-+
-+static const struct mtk_pll_data plls[] = {
-+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001,
-+ PLL_AO, 21, 0x0204, 24, 0, 0x0204, 0),
-+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x0210, 0x021C, 0x00000001,
-+ HAVE_RST_BAR, 21, 0x0214, 24, 0, 0x0214, 0),
-+ PLL(CLK_APMIXED_UNIV2PLL, "univ2pll", 0x0220, 0x022C, 0x00000001,
-+ HAVE_RST_BAR, 7, 0x0224, 24, 0, 0x0224, 14),
-+ PLL(CLK_APMIXED_ETH1PLL, "eth1pll", 0x0300, 0x0310, 0x00000001,
-+ 0, 21, 0x0300, 1, 0, 0x0304, 0),
-+ PLL(CLK_APMIXED_ETH2PLL, "eth2pll", 0x0314, 0x0320, 0x00000001,
-+ 0, 21, 0x0314, 1, 0, 0x0318, 0),
-+ PLL(CLK_APMIXED_AUD1PLL, "aud1pll", 0x0324, 0x0330, 0x00000001,
-+ 0, 31, 0x0324, 1, 0, 0x0328, 0),
-+ PLL(CLK_APMIXED_AUD2PLL, "aud2pll", 0x0334, 0x0340, 0x00000001,
-+ 0, 31, 0x0334, 1, 0, 0x0338, 0),
-+ PLL(CLK_APMIXED_TRGPLL, "trgpll", 0x0344, 0x0354, 0x00000001,
-+ 0, 21, 0x0344, 1, 0, 0x0348, 0),
-+ PLL(CLK_APMIXED_SGMIPLL, "sgmipll", 0x0358, 0x0368, 0x00000001,
-+ 0, 21, 0x0358, 1, 0, 0x035C, 0),
-+};
-+
-+static const struct mtk_gate apmixed_clks[] = {
-+ GATE_APMIXED(CLK_APMIXED_MAIN_CORE_EN, "main_core_en", "mainpll", 5),
-+};
-+
-+static const struct mtk_gate infra_clks[] = {
-+ GATE_INFRA(CLK_INFRA_DBGCLK_PD, "infra_dbgclk_pd", "axi_sel", 0),
-+ GATE_INFRA(CLK_INFRA_TRNG, "trng_ck", "axi_sel", 2),
-+ GATE_INFRA(CLK_INFRA_AUDIO_PD, "infra_audio_pd", "aud_intbus_sel", 5),
-+ GATE_INFRA(CLK_INFRA_IRRX_PD, "infra_irrx_pd", "irrx_sel", 16),
-+ GATE_INFRA(CLK_INFRA_APXGPT_PD, "infra_apxgpt_pd", "f10m_ref_sel", 18),
-+ GATE_INFRA(CLK_INFRA_PMIC_PD, "infra_pmic_pd", "pmicspi_sel", 22),
-+};
-+
-+static const struct mtk_fixed_clk top_fixed_clks[] = {
-+ FIXED_CLK(CLK_TOP_TO_U2_PHY, "to_u2_phy", "clkxtal",
-+ 31250000),
-+ FIXED_CLK(CLK_TOP_TO_U2_PHY_1P, "to_u2_phy_1p", "clkxtal",
-+ 31250000),
-+ FIXED_CLK(CLK_TOP_PCIE0_PIPE_EN, "pcie0_pipe_en", "clkxtal",
-+ 125000000),
-+ FIXED_CLK(CLK_TOP_PCIE1_PIPE_EN, "pcie1_pipe_en", "clkxtal",
-+ 125000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_TX250M, "ssusb_tx250m", "clkxtal",
-+ 250000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_EQ_RX250M, "ssusb_eq_rx250m", "clkxtal",
-+ 250000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_CDR_REF, "ssusb_cdr_ref", "clkxtal",
-+ 33333333),
-+ FIXED_CLK(CLK_TOP_SSUSB_CDR_FB, "ssusb_cdr_fb", "clkxtal",
-+ 50000000),
-+ FIXED_CLK(CLK_TOP_SATA_ASIC, "sata_asic", "clkxtal",
-+ 50000000),
-+ FIXED_CLK(CLK_TOP_SATA_RBC, "sata_rbc", "clkxtal",
-+ 50000000),
-+};
-+
-+static const struct mtk_fixed_factor top_divs[] = {
-+ FACTOR(CLK_TOP_TO_USB3_SYS, "to_usb3_sys", "eth1pll", 1, 4),
-+ FACTOR(CLK_TOP_P1_1MHZ, "p1_1mhz", "eth1pll", 1, 500),
-+ FACTOR(CLK_TOP_4MHZ, "free_run_4mhz", "eth1pll", 1, 125),
-+ FACTOR(CLK_TOP_P0_1MHZ, "p0_1mhz", "eth1pll", 1, 500),
-+ FACTOR(CLK_TOP_TXCLK_SRC_PRE, "txclk_src_pre", "sgmiipll_d2", 1, 1),
-+ FACTOR(CLK_TOP_RTC, "rtc", "clkxtal", 1, 1024),
-+ FACTOR(CLK_TOP_MEMPLL, "mempll", "clkxtal", 32, 1),
-+ FACTOR(CLK_TOP_DMPLL, "dmpll_ck", "mempll", 1, 1),
-+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll", 1, 2),
-+ FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "mainpll", 1, 4),
-+ FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "mainpll", 1, 8),
-+ FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "mainpll", 1, 16),
-+ FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "mainpll", 1, 12),
-+ FACTOR(CLK_TOP_SYSPLL2_D8, "syspll2_d8", "mainpll", 1, 24),
-+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1, 5),
-+ FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "mainpll", 1, 10),
-+ FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "mainpll", 1, 20),
-+ FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "mainpll", 1, 14),
-+ FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "mainpll", 1, 28),
-+ FACTOR(CLK_TOP_SYSPLL4_D16, "syspll4_d16", "mainpll", 1, 112),
-+ FACTOR(CLK_TOP_UNIVPLL, "univpll", "univ2pll", 1, 2),
-+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2),
-+ FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll", 1, 4),
-+ FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll", 1, 8),
-+ FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll", 1, 16),
-+ FACTOR(CLK_TOP_UNIVPLL1_D16, "univpll1_d16", "univpll", 1, 32),
-+ FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll", 1, 6),
-+ FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll", 1, 12),
-+ FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll", 1, 24),
-+ FACTOR(CLK_TOP_UNIVPLL2_D16, "univpll2_d16", "univpll", 1, 48),
-+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
-+ FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll", 1, 10),
-+ FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll", 1, 20),
-+ FACTOR(CLK_TOP_UNIVPLL3_D16, "univpll3_d16", "univpll", 1, 80),
-+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
-+ FACTOR(CLK_TOP_UNIVPLL_D80_D4, "univpll_d80_d4", "univpll", 1, 320),
-+ FACTOR(CLK_TOP_UNIV48M, "univ48m", "univpll", 1, 25),
-+ FACTOR(CLK_TOP_SGMIIPLL, "sgmiipll_ck", "sgmipll", 1, 1),
-+ FACTOR(CLK_TOP_SGMIIPLL_D2, "sgmiipll_d2", "sgmipll", 1, 2),
-+ FACTOR(CLK_TOP_AUD1PLL, "aud1pll_ck", "aud1pll", 1, 1),
-+ FACTOR(CLK_TOP_AUD2PLL, "aud2pll_ck", "aud2pll", 1, 1),
-+ FACTOR(CLK_TOP_AUD_I2S2_MCK, "aud_i2s2_mck", "i2s2_mck_sel", 1, 2),
-+ FACTOR(CLK_TOP_TO_USB3_REF, "to_usb3_ref", "univpll2_d4", 1, 4),
-+ FACTOR(CLK_TOP_PCIE1_MAC_EN, "pcie1_mac_en", "univpll1_d4", 1, 1),
-+ FACTOR(CLK_TOP_PCIE0_MAC_EN, "pcie0_mac_en", "univpll1_d4", 1, 1),
-+ FACTOR(CLK_TOP_ETH_500M, "eth_500m", "eth1pll", 1, 1),
-+};
-+
-+static const struct mtk_gate top_clks[] = {
-+ /* TOP0 */
-+ GATE_TOP0(CLK_TOP_APLL1_DIV_PD, "apll1_ck_div_pd", "apll1_ck_div", 0),
-+ GATE_TOP0(CLK_TOP_APLL2_DIV_PD, "apll2_ck_div_pd", "apll2_ck_div", 1),
-+ GATE_TOP0(CLK_TOP_I2S0_MCK_DIV_PD, "i2s0_mck_div_pd", "i2s0_mck_div",
-+ 2),
-+ GATE_TOP0(CLK_TOP_I2S1_MCK_DIV_PD, "i2s1_mck_div_pd", "i2s1_mck_div",
-+ 3),
-+ GATE_TOP0(CLK_TOP_I2S2_MCK_DIV_PD, "i2s2_mck_div_pd", "i2s2_mck_div",
-+ 4),
-+ GATE_TOP0(CLK_TOP_I2S3_MCK_DIV_PD, "i2s3_mck_div_pd", "i2s3_mck_div",
-+ 5),
-+
-+ /* TOP1 */
-+ GATE_TOP1(CLK_TOP_A1SYS_HP_DIV_PD, "a1sys_div_pd", "a1sys_div", 0),
-+ GATE_TOP1(CLK_TOP_A2SYS_HP_DIV_PD, "a2sys_div_pd", "a2sys_div", 16),
-+};
-+
-+static const struct mtk_clk_divider top_adj_divs[] = {
-+ DIV_ADJ(CLK_TOP_APLL1_DIV, "apll1_ck_div", "apll1_ck_sel",
-+ 0x120, 24, 3),
-+ DIV_ADJ(CLK_TOP_APLL2_DIV, "apll2_ck_div", "apll2_ck_sel",
-+ 0x120, 28, 3),
-+ DIV_ADJ(CLK_TOP_I2S0_MCK_DIV, "i2s0_mck_div", "i2s0_mck_sel",
-+ 0x124, 0, 7),
-+ DIV_ADJ(CLK_TOP_I2S1_MCK_DIV, "i2s1_mck_div", "i2s1_mck_sel",
-+ 0x124, 8, 7),
-+ DIV_ADJ(CLK_TOP_I2S2_MCK_DIV, "i2s2_mck_div", "aud_i2s2_mck",
-+ 0x124, 16, 7),
-+ DIV_ADJ(CLK_TOP_I2S3_MCK_DIV, "i2s3_mck_div", "i2s3_mck_sel",
-+ 0x124, 24, 7),
-+ DIV_ADJ(CLK_TOP_A1SYS_HP_DIV, "a1sys_div", "a1sys_hp_sel",
-+ 0x128, 8, 7),
-+ DIV_ADJ(CLK_TOP_A2SYS_HP_DIV, "a2sys_div", "a2sys_hp_sel",
-+ 0x128, 24, 7),
-+};
-+
-+static const struct mtk_gate peri_clks[] = {
-+ /* PERI0 */
-+ GATE_PERI0(CLK_PERI_THERM_PD, "peri_therm_pd", "axi_sel", 1),
-+ GATE_PERI0(CLK_PERI_PWM1_PD, "peri_pwm1_pd", "clkxtal", 2),
-+ GATE_PERI0(CLK_PERI_PWM2_PD, "peri_pwm2_pd", "clkxtal", 3),
-+ GATE_PERI0(CLK_PERI_PWM3_PD, "peri_pwm3_pd", "clkxtal", 4),
-+ GATE_PERI0(CLK_PERI_PWM4_PD, "peri_pwm4_pd", "clkxtal", 5),
-+ GATE_PERI0(CLK_PERI_PWM5_PD, "peri_pwm5_pd", "clkxtal", 6),
-+ GATE_PERI0(CLK_PERI_PWM6_PD, "peri_pwm6_pd", "clkxtal", 7),
-+ GATE_PERI0(CLK_PERI_PWM7_PD, "peri_pwm7_pd", "clkxtal", 8),
-+ GATE_PERI0(CLK_PERI_PWM_PD, "peri_pwm_pd", "clkxtal", 9),
-+ GATE_PERI0(CLK_PERI_AP_DMA_PD, "peri_ap_dma_pd", "axi_sel", 12),
-+ GATE_PERI0(CLK_PERI_MSDC30_0_PD, "peri_msdc30_0", "msdc30_0_sel", 13),
-+ GATE_PERI0(CLK_PERI_MSDC30_1_PD, "peri_msdc30_1", "msdc30_1_sel", 14),
-+ GATE_PERI0(CLK_PERI_UART0_PD, "peri_uart0_pd", "axi_sel", 17),
-+ GATE_PERI0(CLK_PERI_UART1_PD, "peri_uart1_pd", "axi_sel", 18),
-+ GATE_PERI0(CLK_PERI_UART2_PD, "peri_uart2_pd", "axi_sel", 19),
-+ GATE_PERI0(CLK_PERI_UART3_PD, "peri_uart3_pd", "axi_sel", 20),
-+ GATE_PERI0(CLK_PERI_UART4_PD, "peri_uart4_pd", "axi_sel", 21),
-+ GATE_PERI0(CLK_PERI_BTIF_PD, "peri_btif_pd", "axi_sel", 22),
-+ GATE_PERI0(CLK_PERI_I2C0_PD, "peri_i2c0_pd", "axi_sel", 23),
-+ GATE_PERI0(CLK_PERI_I2C1_PD, "peri_i2c1_pd", "axi_sel", 24),
-+ GATE_PERI0(CLK_PERI_I2C2_PD, "peri_i2c2_pd", "axi_sel", 25),
-+ GATE_PERI0(CLK_PERI_SPI1_PD, "peri_spi1_pd", "spi1_sel", 26),
-+ GATE_PERI0(CLK_PERI_AUXADC_PD, "peri_auxadc_pd", "clkxtal", 27),
-+ GATE_PERI0(CLK_PERI_SPI0_PD, "peri_spi0_pd", "spi0_sel", 28),
-+ GATE_PERI0(CLK_PERI_SNFI_PD, "peri_snfi_pd", "nfi_infra_sel", 29),
-+ GATE_PERI0(CLK_PERI_NFI_PD, "peri_nfi_pd", "axi_sel", 30),
-+ GATE_PERI0(CLK_PERI_NFIECC_PD, "peri_nfiecc_pd", "axi_sel", 31),
-+
-+ /* PERI1 */
-+ GATE_PERI1(CLK_PERI_FLASH_PD, "peri_flash_pd", "flash_sel", 1),
-+ GATE_PERI1(CLK_PERI_IRTX_PD, "peri_irtx_pd", "irtx_sel", 2),
-+};
-+
-+static struct mtk_composite infra_muxes[] __initdata = {
-+ MUX(CLK_INFRA_MUX1_SEL, "infra_mux1_sel", infra_mux1_parents,
-+ 0x000, 2, 2),
-+};
-+
-+static struct mtk_composite top_muxes[] = {
-+ /* CLK_CFG_0 */
-+ MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
-+ 0x040, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
-+ 0x040, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
-+ 0x040, 16, 1, 23),
-+ MUX_GATE(CLK_TOP_ETH_SEL, "eth_sel", eth_parents,
-+ 0x040, 24, 3, 31),
-+
-+ /* CLK_CFG_1 */
-+ MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
-+ 0x050, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_F10M_REF_SEL, "f10m_ref_sel", f10m_ref_parents,
-+ 0x050, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_NFI_INFRA_SEL, "nfi_infra_sel", nfi_infra_parents,
-+ 0x050, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_FLASH_SEL, "flash_sel", flash_parents,
-+ 0x050, 24, 3, 31),
-+
-+ /* CLK_CFG_2 */
-+ MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
-+ 0x060, 0, 1, 7),
-+ MUX_GATE(CLK_TOP_SPI0_SEL, "spi0_sel", spi0_parents,
-+ 0x060, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_SPI1_SEL, "spi1_sel", spi1_parents,
-+ 0x060, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_MSDC50_0_SEL, "msdc50_0_sel", uart_parents,
-+ 0x060, 24, 3, 31),
-+
-+ /* CLK_CFG_3 */
-+ MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_0_parents,
-+ 0x070, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_0_parents,
-+ 0x070, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_A1SYS_HP_SEL, "a1sys_hp_sel", a1sys_hp_parents,
-+ 0x070, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_A2SYS_HP_SEL, "a2sys_hp_sel", a1sys_hp_parents,
-+ 0x070, 24, 2, 31),
-+
-+ /* CLK_CFG_4 */
-+ MUX_GATE(CLK_TOP_INTDIR_SEL, "intdir_sel", intdir_parents,
-+ 0x080, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
-+ 0x080, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents,
-+ 0x080, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", ddrphycfg_parents,
-+ 0x080, 24, 2, 31),
-+
-+ /* CLK_CFG_5 */
-+ MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents,
-+ 0x090, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_HIF_SEL, "hif_sel", eth_parents,
-+ 0x090, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", audio_parents,
-+ 0x090, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_U2_SEL, "usb20_sel", usb20_parents,
-+ 0x090, 24, 2, 31),
-+
-+ /* CLK_CFG_6 */
-+ MUX_GATE(CLK_TOP_AUD1_SEL, "aud1_sel", aud1_parents,
-+ 0x0A0, 0, 1, 7),
-+ MUX_GATE(CLK_TOP_AUD2_SEL, "aud2_sel", aud2_parents,
-+ 0x0A0, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_IRRX_SEL, "irrx_sel", f10m_ref_parents,
-+ 0x0A0, 16, 1, 23),
-+ MUX_GATE(CLK_TOP_IRTX_SEL, "irtx_sel", f10m_ref_parents,
-+ 0x0A0, 24, 1, 31),
-+
-+ /* CLK_CFG_7 */
-+ MUX_GATE(CLK_TOP_ASM_L_SEL, "asm_l_sel", asm_l_parents,
-+ 0x0B0, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_ASM_M_SEL, "asm_m_sel", asm_l_parents,
-+ 0x0B0, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_ASM_H_SEL, "asm_h_sel", asm_l_parents,
-+ 0x0B0, 16, 2, 23),
-+
-+ /* CLK_AUDDIV_0 */
-+ MUX(CLK_TOP_APLL1_SEL, "apll1_ck_sel", apll1_ck_parents,
-+ 0x120, 6, 1),
-+ MUX(CLK_TOP_APLL2_SEL, "apll2_ck_sel", apll1_ck_parents,
-+ 0x120, 7, 1),
-+ MUX(CLK_TOP_I2S0_MCK_SEL, "i2s0_mck_sel", apll1_ck_parents,
-+ 0x120, 8, 1),
-+ MUX(CLK_TOP_I2S1_MCK_SEL, "i2s1_mck_sel", apll1_ck_parents,
-+ 0x120, 9, 1),
-+ MUX(CLK_TOP_I2S2_MCK_SEL, "i2s2_mck_sel", apll1_ck_parents,
-+ 0x120, 10, 1),
-+ MUX(CLK_TOP_I2S3_MCK_SEL, "i2s3_mck_sel", apll1_ck_parents,
-+ 0x120, 11, 1),
-+};
-+
-+static struct mtk_composite peri_muxes[] = {
-+ /* PERI_GLOBALCON_CKSEL */
-+ MUX(CLK_PERIBUS_SEL, "peribus_ck_sel", peribus_ck_parents, 0x05C, 0, 1),
-+};
-+
-+static int mtk_topckgen_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ void __iomem *base;
-+ struct device_node *node = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
-+
-+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
-+ clk_data);
-+
-+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
-+ clk_data);
-+
-+ mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
-+ base, &mt7622_clk_lock, clk_data);
-+
-+ mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
-+ base, &mt7622_clk_lock, clk_data);
-+
-+ mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
-+ clk_data);
-+
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_AXI_SEL]);
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_MEM_SEL]);
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
-+
-+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+}
-+
-+static int __init mtk_infrasys_init(struct platform_device *pdev)
-+{
-+ struct device_node *node = pdev->dev.of_node;
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
-+
-+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-+ clk_data);
-+
-+ mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get,
-+ clk_data);
-+ if (r)
-+ return r;
-+
-+ mtk_register_reset_controller(node, 1, 0x30);
-+
-+ return 0;
-+}
-+
-+static int mtk_apmixedsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
-+ if (!clk_data)
-+ return -ENOMEM;
-+
-+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
-+ clk_data);
-+
-+ mtk_clk_register_gates(node, apmixed_clks,
-+ ARRAY_SIZE(apmixed_clks), clk_data);
-+
-+ clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMPLL]);
-+ clk_prepare_enable(clk_data->clks[CLK_APMIXED_MAIN_CORE_EN]);
-+
-+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+}
-+
-+static int mtk_pericfg_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ void __iomem *base;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
-+
-+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-+ clk_data);
-+
-+ mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+ &mt7622_clk_lock, clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ return r;
-+
-+ clk_prepare_enable(clk_data->clks[CLK_PERI_UART0_PD]);
-+
-+ mtk_register_reset_controller(node, 2, 0x0);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7622[] = {
-+ {
-+ .compatible = "mediatek,mt7622-apmixedsys",
-+ .data = mtk_apmixedsys_init,
-+ }, {
-+ .compatible = "mediatek,mt7622-infracfg",
-+ .data = mtk_infrasys_init,
-+ }, {
-+ .compatible = "mediatek,mt7622-topckgen",
-+ .data = mtk_topckgen_init,
-+ }, {
-+ .compatible = "mediatek,mt7622-pericfg",
-+ .data = mtk_pericfg_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7622_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7622_drv = {
-+ .probe = clk_mt7622_probe,
-+ .driver = {
-+ .name = "clk-mt7622",
-+ .of_match_table = of_match_clk_mt7622,
-+ },
-+};
-+
-+static int clk_mt7622_init(void)
-+{
-+ return platform_driver_register(&clk_mt7622_drv);
-+}
-+
-+arch_initcall(clk_mt7622_init);
diff --git a/target/linux/mediatek/patches-4.14/0151-arm64-dts-mt8173-remove-mediatek-mt8135-mmc-from-mmc.patch b/target/linux/mediatek/patches-4.14/0151-arm64-dts-mt8173-remove-mediatek-mt8135-mmc-from-mmc.patch
deleted file mode 100644
index b30604f90f..0000000000
--- a/target/linux/mediatek/patches-4.14/0151-arm64-dts-mt8173-remove-mediatek-mt8135-mmc-from-mmc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From fa69904d3b7357a5be43771f764e10fd99ebbb11 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:30 +0800
-Subject: [PATCH 151/224] arm64: dts: mt8173: remove "mediatek, mt8135-mmc"
- from mmc nodes
-
-devicetree bindings has been updated to support multi-platforms,
-so that each platform has its owns compatible name.
-And, this compatible name may used in driver to distinguish with
-other platform.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
- 1 file changed, 4 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
-@@ -684,8 +684,7 @@
- };
-
- mmc0: mmc@11230000 {
-- compatible = "mediatek,mt8173-mmc",
-- "mediatek,mt8135-mmc";
-+ compatible = "mediatek,mt8173-mmc";
- reg = <0 0x11230000 0 0x1000>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_0>,
-@@ -695,8 +694,7 @@
- };
-
- mmc1: mmc@11240000 {
-- compatible = "mediatek,mt8173-mmc",
-- "mediatek,mt8135-mmc";
-+ compatible = "mediatek,mt8173-mmc";
- reg = <0 0x11240000 0 0x1000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_1>,
-@@ -706,8 +704,7 @@
- };
-
- mmc2: mmc@11250000 {
-- compatible = "mediatek,mt8173-mmc",
-- "mediatek,mt8135-mmc";
-+ compatible = "mediatek,mt8173-mmc";
- reg = <0 0x11250000 0 0x1000>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_2>,
-@@ -717,8 +714,7 @@
- };
-
- mmc3: mmc@11260000 {
-- compatible = "mediatek,mt8173-mmc",
-- "mediatek,mt8135-mmc";
-+ compatible = "mediatek,mt8173-mmc";
- reg = <0 0x11260000 0 0x1000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_3>,
diff --git a/target/linux/mediatek/patches-4.14/0152-mmc-mediatek-make-hs400_tune_response-only-for-mt817.patch b/target/linux/mediatek/patches-4.14/0152-mmc-mediatek-make-hs400_tune_response-only-for-mt817.patch
deleted file mode 100644
index b74c3f52dc..0000000000
--- a/target/linux/mediatek/patches-4.14/0152-mmc-mediatek-make-hs400_tune_response-only-for-mt817.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From bc70c7f1174b937af2784977281a1567f69dd2b6 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:31 +0800
-Subject: [PATCH 152/224] mmc: mediatek: make hs400_tune_response only for
- mt8173
-
-the origin design of hs400_tune_response is for mt8173 because of
-mt8173 has a special design. for doing that, we add a new member
-"compatible", by now it's only for mt8173.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -302,6 +302,7 @@ struct msdc_save_para {
-
- struct mtk_mmc_compatible {
- u8 clk_div_bits;
-+ bool hs400_tune; /* only used for MT8173 */
- };
-
- struct msdc_tune_para {
-@@ -362,18 +363,22 @@ struct msdc_host {
-
- static const struct mtk_mmc_compatible mt8135_compat = {
- .clk_div_bits = 8,
-+ .hs400_tune = false,
- };
-
- static const struct mtk_mmc_compatible mt8173_compat = {
- .clk_div_bits = 8,
-+ .hs400_tune = true,
- };
-
- static const struct mtk_mmc_compatible mt2701_compat = {
- .clk_div_bits = 12,
-+ .hs400_tune = false,
- };
-
- static const struct mtk_mmc_compatible mt2712_compat = {
- .clk_div_bits = 12,
-+ .hs400_tune = false,
- };
-
- static const struct of_device_id msdc_of_ids[] = {
-@@ -668,7 +673,8 @@ static void msdc_set_mclk(struct msdc_ho
- host->base + PAD_CMD_TUNE);
- }
-
-- if (timing == MMC_TIMING_MMC_HS400)
-+ if (timing == MMC_TIMING_MMC_HS400 &&
-+ host->dev_comp->hs400_tune)
- sdr_set_field(host->base + PAD_CMD_TUNE,
- MSDC_PAD_TUNE_CMDRRDLY,
- host->hs400_cmd_int_delay);
-@@ -1597,7 +1603,8 @@ static int msdc_execute_tuning(struct mm
- struct msdc_host *host = mmc_priv(mmc);
- int ret;
-
-- if (host->hs400_mode)
-+ if (host->hs400_mode &&
-+ host->dev_comp->hs400_tune)
- ret = hs400_tune_response(mmc, opcode);
- else
- ret = msdc_tune_response(mmc, opcode);
diff --git a/target/linux/mediatek/patches-4.14/0153-mmc-mediatek-add-pad_tune0-support.patch b/target/linux/mediatek/patches-4.14/0153-mmc-mediatek-add-pad_tune0-support.patch
deleted file mode 100644
index c8a442195f..0000000000
--- a/target/linux/mediatek/patches-4.14/0153-mmc-mediatek-add-pad_tune0-support.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From a10349f1710a11239c58da3a7e5b353c6b2070c2 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:32 +0800
-Subject: [PATCH 153/224] mmc: mediatek: add pad_tune0 support
-
-from mt2701, the register of PAD_TUNE has been phased out,
-while there is a new register of PAD_TUNE0
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 51 ++++++++++++++++++++++++++++++-----------------
- 1 file changed, 33 insertions(+), 18 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -75,6 +75,7 @@
- #define MSDC_PATCH_BIT 0xb0
- #define MSDC_PATCH_BIT1 0xb4
- #define MSDC_PAD_TUNE 0xec
-+#define MSDC_PAD_TUNE0 0xf0
- #define PAD_DS_TUNE 0x188
- #define PAD_CMD_TUNE 0x18c
- #define EMMC50_CFG0 0x208
-@@ -303,6 +304,7 @@ struct msdc_save_para {
- struct mtk_mmc_compatible {
- u8 clk_div_bits;
- bool hs400_tune; /* only used for MT8173 */
-+ u32 pad_tune_reg;
- };
-
- struct msdc_tune_para {
-@@ -364,21 +366,25 @@ struct msdc_host {
- static const struct mtk_mmc_compatible mt8135_compat = {
- .clk_div_bits = 8,
- .hs400_tune = false,
-+ .pad_tune_reg = MSDC_PAD_TUNE,
- };
-
- static const struct mtk_mmc_compatible mt8173_compat = {
- .clk_div_bits = 8,
- .hs400_tune = true,
-+ .pad_tune_reg = MSDC_PAD_TUNE,
- };
-
- static const struct mtk_mmc_compatible mt2701_compat = {
- .clk_div_bits = 12,
- .hs400_tune = false,
-+ .pad_tune_reg = MSDC_PAD_TUNE0,
- };
-
- static const struct mtk_mmc_compatible mt2712_compat = {
- .clk_div_bits = 12,
- .hs400_tune = false,
-+ .pad_tune_reg = MSDC_PAD_TUNE0,
- };
-
- static const struct of_device_id msdc_of_ids[] = {
-@@ -583,6 +589,7 @@ static void msdc_set_mclk(struct msdc_ho
- u32 flags;
- u32 div;
- u32 sclk;
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
-
- if (!hz) {
- dev_dbg(host->dev, "set mclk to 0\n");
-@@ -665,10 +672,10 @@ static void msdc_set_mclk(struct msdc_ho
- */
- if (host->sclk <= 52000000) {
- writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
-- writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
-+ writel(host->def_tune_para.pad_tune, host->base + tune_reg);
- } else {
- writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
-- writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
-+ writel(host->saved_tune_para.pad_tune, host->base + tune_reg);
- writel(host->saved_tune_para.pad_cmd_tune,
- host->base + PAD_CMD_TUNE);
- }
-@@ -1226,6 +1233,7 @@ static irqreturn_t msdc_irq(int irq, voi
- static void msdc_init_hw(struct msdc_host *host)
- {
- u32 val;
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
-
- /* Configure to MMC/SD mode, clock free running */
- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
-@@ -1241,7 +1249,7 @@ static void msdc_init_hw(struct msdc_hos
- val = readl(host->base + MSDC_INT);
- writel(val, host->base + MSDC_INT);
-
-- writel(0, host->base + MSDC_PAD_TUNE);
-+ writel(0, host->base + tune_reg);
- writel(0, host->base + MSDC_IOCON);
- sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
- writel(0x403c0046, host->base + MSDC_PATCH_BIT);
-@@ -1261,7 +1269,7 @@ static void msdc_init_hw(struct msdc_hos
- sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
-
- host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
-- host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
-+ host->def_tune_para.pad_tune = readl(host->base + tune_reg);
- dev_dbg(host->dev, "init hardware done!");
- }
-
-@@ -1404,18 +1412,19 @@ static int msdc_tune_response(struct mmc
- struct msdc_delay_phase internal_delay_phase;
- u8 final_delay, final_maxlen;
- u32 internal_delay = 0;
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
- int cmd_err;
- int i, j;
-
- if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
- mmc->ios.timing == MMC_TIMING_UHS_SDR104)
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_CMDRRDLY,
- host->hs200_cmd_int_delay);
-
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- for (i = 0 ; i < PAD_DELAY_MAX; i++) {
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_CMDRDLY, i);
- /*
- * Using the same parameters, it may sometimes pass the test,
-@@ -1439,7 +1448,7 @@ static int msdc_tune_response(struct mmc
-
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- for (i = 0; i < PAD_DELAY_MAX; i++) {
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_CMDRDLY, i);
- /*
- * Using the same parameters, it may sometimes pass the test,
-@@ -1464,12 +1473,12 @@ skip_fall:
- final_maxlen = final_fall_delay.maxlen;
- if (final_maxlen == final_rise_delay.maxlen) {
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
-- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
-+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
- final_rise_delay.final_phase);
- final_delay = final_rise_delay.final_phase;
- } else {
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
-- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
-+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
- final_fall_delay.final_phase);
- final_delay = final_fall_delay.final_phase;
- }
-@@ -1477,7 +1486,7 @@ skip_fall:
- goto skip_internal;
-
- for (i = 0; i < PAD_DELAY_MAX; i++) {
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_CMDRRDLY, i);
- mmc_send_tuning(mmc, opcode, &cmd_err);
- if (!cmd_err)
-@@ -1485,7 +1494,7 @@ skip_fall:
- }
- dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
- internal_delay_phase = get_best_delay(host, internal_delay);
-- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
-+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRRDLY,
- internal_delay_phase.final_phase);
- skip_internal:
- dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
-@@ -1548,12 +1557,13 @@ static int msdc_tune_data(struct mmc_hos
- u32 rise_delay = 0, fall_delay = 0;
- struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
- u8 final_delay, final_maxlen;
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
- int i, ret;
-
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- for (i = 0 ; i < PAD_DELAY_MAX; i++) {
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_DATRRDLY, i);
- ret = mmc_send_tuning(mmc, opcode, NULL);
- if (!ret)
-@@ -1568,7 +1578,7 @@ static int msdc_tune_data(struct mmc_hos
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- for (i = 0; i < PAD_DELAY_MAX; i++) {
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_DATRRDLY, i);
- ret = mmc_send_tuning(mmc, opcode, NULL);
- if (!ret)
-@@ -1581,14 +1591,14 @@ skip_fall:
- if (final_maxlen == final_rise_delay.maxlen) {
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_DATRRDLY,
- final_rise_delay.final_phase);
- final_delay = final_rise_delay.final_phase;
- } else {
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
-- sdr_set_field(host->base + MSDC_PAD_TUNE,
-+ sdr_set_field(host->base + tune_reg,
- MSDC_PAD_TUNE_DATRRDLY,
- final_fall_delay.final_phase);
- final_delay = final_fall_delay.final_phase;
-@@ -1602,6 +1612,7 @@ static int msdc_execute_tuning(struct mm
- {
- struct msdc_host *host = mmc_priv(mmc);
- int ret;
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
-
- if (host->hs400_mode &&
- host->dev_comp->hs400_tune)
-@@ -1619,7 +1630,7 @@ static int msdc_execute_tuning(struct mm
- }
-
- host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
-- host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
-+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
- host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
- return ret;
- }
-@@ -1860,10 +1871,12 @@ static int msdc_drv_remove(struct platfo
- #ifdef CONFIG_PM
- static void msdc_save_reg(struct msdc_host *host)
- {
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
-+
- host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
- host->save_para.iocon = readl(host->base + MSDC_IOCON);
- host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
-- host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
-+ host->save_para.pad_tune = readl(host->base + tune_reg);
- host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
- host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
- host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
-@@ -1873,10 +1886,12 @@ static void msdc_save_reg(struct msdc_ho
-
- static void msdc_restore_reg(struct msdc_host *host)
- {
-+ u32 tune_reg = host->dev_comp->pad_tune_reg;
-+
- writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
- writel(host->save_para.iocon, host->base + MSDC_IOCON);
- writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
-- writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
-+ writel(host->save_para.pad_tune, host->base + tune_reg);
- writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
- writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
- writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
diff --git a/target/linux/mediatek/patches-4.14/0154-mmc-mediatek-add-async-fifo-and-data-tune-support.patch b/target/linux/mediatek/patches-4.14/0154-mmc-mediatek-add-async-fifo-and-data-tune-support.patch
deleted file mode 100644
index fab917bcee..0000000000
--- a/target/linux/mediatek/patches-4.14/0154-mmc-mediatek-add-async-fifo-and-data-tune-support.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 830574225e621809600902b69bbdd563e67ef4eb Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:33 +0800
-Subject: [PATCH 154/224] mmc: mediatek: add async fifo and data tune support
-
-mt2701/mt2712 supports async fifo & data tune, which can improve
-host stability.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 50 insertions(+), 2 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -74,6 +74,7 @@
- #define MSDC_DMA_CFG 0x9c
- #define MSDC_PATCH_BIT 0xb0
- #define MSDC_PATCH_BIT1 0xb4
-+#define MSDC_PATCH_BIT2 0xb8
- #define MSDC_PAD_TUNE 0xec
- #define MSDC_PAD_TUNE0 0xf0
- #define PAD_DS_TUNE 0x188
-@@ -218,11 +219,20 @@
-
- #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
-
-+#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
-+#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
-+#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
-+#define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
-+#define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
-+
- #define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
- #define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
- #define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
- #define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
- #define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
-+#define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
-+#define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
-+#define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
-
- #define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
- #define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
-@@ -296,6 +306,7 @@ struct msdc_save_para {
- u32 pad_tune;
- u32 patch_bit0;
- u32 patch_bit1;
-+ u32 patch_bit2;
- u32 pad_ds_tune;
- u32 pad_cmd_tune;
- u32 emmc50_cfg0;
-@@ -305,6 +316,8 @@ struct mtk_mmc_compatible {
- u8 clk_div_bits;
- bool hs400_tune; /* only used for MT8173 */
- u32 pad_tune_reg;
-+ bool async_fifo;
-+ bool data_tune;
- };
-
- struct msdc_tune_para {
-@@ -367,24 +380,32 @@ static const struct mtk_mmc_compatible m
- .clk_div_bits = 8,
- .hs400_tune = false,
- .pad_tune_reg = MSDC_PAD_TUNE,
-+ .async_fifo = false,
-+ .data_tune = false,
- };
-
- static const struct mtk_mmc_compatible mt8173_compat = {
- .clk_div_bits = 8,
- .hs400_tune = true,
- .pad_tune_reg = MSDC_PAD_TUNE,
-+ .async_fifo = false,
-+ .data_tune = false,
- };
-
- static const struct mtk_mmc_compatible mt2701_compat = {
- .clk_div_bits = 12,
- .hs400_tune = false,
- .pad_tune_reg = MSDC_PAD_TUNE0,
-+ .async_fifo = true,
-+ .data_tune = true,
- };
-
- static const struct mtk_mmc_compatible mt2712_compat = {
- .clk_div_bits = 12,
- .hs400_tune = false,
- .pad_tune_reg = MSDC_PAD_TUNE0,
-+ .async_fifo = true,
-+ .data_tune = true,
- };
-
- static const struct of_device_id msdc_of_ids[] = {
-@@ -1254,8 +1275,29 @@ static void msdc_init_hw(struct msdc_hos
- sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
- writel(0x403c0046, host->base + MSDC_PATCH_BIT);
- sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
-- writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
-+ writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
- sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
-+ if (host->dev_comp->async_fifo) {
-+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PB2_RESPWAIT, 3);
-+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PB2_RESPSTSENSEL, 2);
-+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PB2_CRCSTSENSEL, 2);
-+ /* use async fifo, then no need tune internal delay */
-+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PATCH_BIT2_CFGRESP);
-+ sdr_set_bits(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PATCH_BIT2_CFGCRCSTS);
-+ }
-+
-+ if (host->dev_comp->data_tune) {
-+ sdr_set_bits(host->base + tune_reg,
-+ MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
-+ } else {
-+ /* choose clock tune */
-+ sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
-+ }
-
- /* Configure to enable SDIO mode.
- * it's must otherwise sdio cmd5 failed
-@@ -1270,6 +1312,8 @@ static void msdc_init_hw(struct msdc_hos
-
- host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->def_tune_para.pad_tune = readl(host->base + tune_reg);
-+ host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
-+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
- dev_dbg(host->dev, "init hardware done!");
- }
-
-@@ -1482,7 +1526,7 @@ skip_fall:
- final_fall_delay.final_phase);
- final_delay = final_fall_delay.final_phase;
- }
-- if (host->hs200_cmd_int_delay)
-+ if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
- goto skip_internal;
-
- for (i = 0; i < PAD_DELAY_MAX; i++) {
-@@ -1641,6 +1685,8 @@ static int msdc_prepare_hs400_tuning(str
- host->hs400_mode = true;
-
- writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
-+ /* hs400 mode must set it to 0 */
-+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
- return 0;
- }
-
-@@ -1879,6 +1925,7 @@ static void msdc_save_reg(struct msdc_ho
- host->save_para.pad_tune = readl(host->base + tune_reg);
- host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
- host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
-+ host->save_para.patch_bit2 = readl(host->base + MSDC_PATCH_BIT2);
- host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
- host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
- host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
-@@ -1894,6 +1941,7 @@ static void msdc_restore_reg(struct msdc
- writel(host->save_para.pad_tune, host->base + tune_reg);
- writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
- writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
-+ writel(host->save_para.patch_bit2, host->base + MSDC_PATCH_BIT2);
- writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
- writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
- writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
diff --git a/target/linux/mediatek/patches-4.14/0155-mmc-mediatek-add-busy_check-support.patch b/target/linux/mediatek/patches-4.14/0155-mmc-mediatek-add-busy_check-support.patch
deleted file mode 100644
index 5735f1a251..0000000000
--- a/target/linux/mediatek/patches-4.14/0155-mmc-mediatek-add-busy_check-support.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 788d269aee4c612d5cd97b896ea5d22f19137097 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:34 +0800
-Subject: [PATCH 155/224] mmc: mediatek: add busy_check support
-
-bit7 of PATCH_BIT1 has different meaning in new design, to
-compatible with previous platform, clear this bit in new
-platform.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -318,6 +318,7 @@ struct mtk_mmc_compatible {
- u32 pad_tune_reg;
- bool async_fifo;
- bool data_tune;
-+ bool busy_check;
- };
-
- struct msdc_tune_para {
-@@ -382,6 +383,7 @@ static const struct mtk_mmc_compatible m
- .pad_tune_reg = MSDC_PAD_TUNE,
- .async_fifo = false,
- .data_tune = false,
-+ .busy_check = false,
- };
-
- static const struct mtk_mmc_compatible mt8173_compat = {
-@@ -390,6 +392,7 @@ static const struct mtk_mmc_compatible m
- .pad_tune_reg = MSDC_PAD_TUNE,
- .async_fifo = false,
- .data_tune = false,
-+ .busy_check = false,
- };
-
- static const struct mtk_mmc_compatible mt2701_compat = {
-@@ -398,6 +401,7 @@ static const struct mtk_mmc_compatible m
- .pad_tune_reg = MSDC_PAD_TUNE0,
- .async_fifo = true,
- .data_tune = true,
-+ .busy_check = false,
- };
-
- static const struct mtk_mmc_compatible mt2712_compat = {
-@@ -406,6 +410,7 @@ static const struct mtk_mmc_compatible m
- .pad_tune_reg = MSDC_PAD_TUNE0,
- .async_fifo = true,
- .data_tune = true,
-+ .busy_check = true,
- };
-
- static const struct of_device_id msdc_of_ids[] = {
-@@ -1277,6 +1282,8 @@ static void msdc_init_hw(struct msdc_hos
- sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
- sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
-+ if (host->dev_comp->busy_check)
-+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
- if (host->dev_comp->async_fifo) {
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_RESPWAIT, 3);
diff --git a/target/linux/mediatek/patches-4.14/0156-mmc-mediatek-add-stop_clk-fix-and-enhance_rx-support.patch b/target/linux/mediatek/patches-4.14/0156-mmc-mediatek-add-stop_clk-fix-and-enhance_rx-support.patch
deleted file mode 100644
index 044cc021fc..0000000000
--- a/target/linux/mediatek/patches-4.14/0156-mmc-mediatek-add-stop_clk-fix-and-enhance_rx-support.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From 9257240bcaf8f9ee6878357e00e7ab511ad6d325 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:35 +0800
-Subject: [PATCH 156/224] mmc: mediatek: add stop_clk fix and enhance_rx
- support
-
-mt2712 supports stop_clk fix and enhance_rx, which can improve
-host stability.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 43 insertions(+), 4 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -67,6 +67,7 @@
- #define SDC_RESP2 0x48
- #define SDC_RESP3 0x4c
- #define SDC_BLK_NUM 0x50
-+#define SDC_ADV_CFG0 0x64
- #define EMMC_IOCON 0x7c
- #define SDC_ACMD_RESP 0x80
- #define MSDC_DMA_SA 0x90
-@@ -80,6 +81,7 @@
- #define PAD_DS_TUNE 0x188
- #define PAD_CMD_TUNE 0x18c
- #define EMMC50_CFG0 0x208
-+#define SDC_FIFO_CFG 0x228
-
- /*--------------------------------------------------------------------------*/
- /* Register Mask */
-@@ -188,6 +190,9 @@
- #define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
- #define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
-
-+/* SDC_ADV_CFG0 mask */
-+#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */
-+
- /* MSDC_DMA_CTRL mask */
- #define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
- #define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
-@@ -219,6 +224,8 @@
-
- #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
-
-+#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
-+
- #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
- #define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
- #define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
-@@ -244,6 +251,9 @@
- #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
- #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
-
-+#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
-+#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
-+
- #define REQ_CMD_EIO (0x1 << 0)
- #define REQ_CMD_TMO (0x1 << 1)
- #define REQ_DAT_ERR (0x1 << 2)
-@@ -310,6 +320,7 @@ struct msdc_save_para {
- u32 pad_ds_tune;
- u32 pad_cmd_tune;
- u32 emmc50_cfg0;
-+ u32 sdc_fifo_cfg;
- };
-
- struct mtk_mmc_compatible {
-@@ -319,6 +330,8 @@ struct mtk_mmc_compatible {
- bool async_fifo;
- bool data_tune;
- bool busy_check;
-+ bool stop_clk_fix;
-+ bool enhance_rx;
- };
-
- struct msdc_tune_para {
-@@ -384,6 +397,8 @@ static const struct mtk_mmc_compatible m
- .async_fifo = false,
- .data_tune = false,
- .busy_check = false,
-+ .stop_clk_fix = false,
-+ .enhance_rx = false,
- };
-
- static const struct mtk_mmc_compatible mt8173_compat = {
-@@ -393,6 +408,8 @@ static const struct mtk_mmc_compatible m
- .async_fifo = false,
- .data_tune = false,
- .busy_check = false,
-+ .stop_clk_fix = false,
-+ .enhance_rx = false,
- };
-
- static const struct mtk_mmc_compatible mt2701_compat = {
-@@ -402,6 +419,8 @@ static const struct mtk_mmc_compatible m
- .async_fifo = true,
- .data_tune = true,
- .busy_check = false,
-+ .stop_clk_fix = false,
-+ .enhance_rx = false,
- };
-
- static const struct mtk_mmc_compatible mt2712_compat = {
-@@ -411,6 +430,8 @@ static const struct mtk_mmc_compatible m
- .async_fifo = true,
- .data_tune = true,
- .busy_check = true,
-+ .stop_clk_fix = true,
-+ .enhance_rx = true,
- };
-
- static const struct of_device_id msdc_of_ids[] = {
-@@ -1282,15 +1303,31 @@ static void msdc_init_hw(struct msdc_hos
- sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
- sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
-+
-+ if (host->dev_comp->stop_clk_fix) {
-+ sdr_set_field(host->base + MSDC_PATCH_BIT1,
-+ MSDC_PATCH_BIT1_STOP_DLY, 3);
-+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
-+ SDC_FIFO_CFG_WRVALIDSEL);
-+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
-+ SDC_FIFO_CFG_RDVALIDSEL);
-+ }
-+
- if (host->dev_comp->busy_check)
- sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
-+
- if (host->dev_comp->async_fifo) {
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_RESPWAIT, 3);
-- sdr_set_field(host->base + MSDC_PATCH_BIT2,
-- MSDC_PB2_RESPSTSENSEL, 2);
-- sdr_set_field(host->base + MSDC_PATCH_BIT2,
-- MSDC_PB2_CRCSTSENSEL, 2);
-+ if (host->dev_comp->enhance_rx) {
-+ sdr_set_bits(host->base + SDC_ADV_CFG0,
-+ SDC_RX_ENHANCE_EN);
-+ } else {
-+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PB2_RESPSTSENSEL, 2);
-+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
-+ MSDC_PB2_CRCSTSENSEL, 2);
-+ }
- /* use async fifo, then no need tune internal delay */
- sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
- MSDC_PATCH_BIT2_CFGRESP);
-@@ -1936,6 +1973,7 @@ static void msdc_save_reg(struct msdc_ho
- host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
- host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
- host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
-+ host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
- }
-
- static void msdc_restore_reg(struct msdc_host *host)
-@@ -1952,6 +1990,7 @@ static void msdc_restore_reg(struct msdc
- writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
- writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
- writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
-+ writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
- }
-
- static int msdc_runtime_suspend(struct device *dev)
diff --git a/target/linux/mediatek/patches-4.14/0157-mmc-mediatek-add-support-of-source_cg-clock.patch b/target/linux/mediatek/patches-4.14/0157-mmc-mediatek-add-support-of-source_cg-clock.patch
deleted file mode 100644
index b02a9c1617..0000000000
--- a/target/linux/mediatek/patches-4.14/0157-mmc-mediatek-add-support-of-source_cg-clock.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 3c6b94d7091f0793445f2faf777e584af643e9da Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:36 +0800
-Subject: [PATCH 157/224] mmc: mediatek: add support of source_cg clock
-
-source clock need an independent cg to control, when doing clk mode
-switch, need gate source clock to avoid hw issue(multi-bit sync hw hang)
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 23 ++++++++++++++++++++++-
- 1 file changed, 22 insertions(+), 1 deletion(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -374,6 +374,7 @@ struct msdc_host {
-
- struct clk *src_clk; /* msdc source clock */
- struct clk *h_clk; /* msdc h_clk */
-+ struct clk *src_clk_cg; /* msdc source clock control gate */
- u32 mclk; /* mmc subsystem clock frequency */
- u32 src_clk_freq; /* source clock frequency */
- u32 sclk; /* SD/MS bus clock frequency */
-@@ -618,6 +619,7 @@ static void msdc_set_timeout(struct msdc
-
- static void msdc_gate_clock(struct msdc_host *host)
- {
-+ clk_disable_unprepare(host->src_clk_cg);
- clk_disable_unprepare(host->src_clk);
- clk_disable_unprepare(host->h_clk);
- }
-@@ -626,6 +628,7 @@ static void msdc_ungate_clock(struct msd
- {
- clk_prepare_enable(host->h_clk);
- clk_prepare_enable(host->src_clk);
-+ clk_prepare_enable(host->src_clk_cg);
- while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
- cpu_relax();
- }
-@@ -694,6 +697,15 @@ static void msdc_set_mclk(struct msdc_ho
- sclk = (host->src_clk_freq >> 2) / div;
- }
- }
-+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
-+ /*
-+ * As src_clk/HCLK use the same bit to gate/ungate,
-+ * So if want to only gate src_clk, need gate its parent(mux).
-+ */
-+ if (host->src_clk_cg)
-+ clk_disable_unprepare(host->src_clk_cg);
-+ else
-+ clk_disable_unprepare(clk_get_parent(host->src_clk));
- if (host->dev_comp->clk_div_bits == 8)
- sdr_set_field(host->base + MSDC_CFG,
- MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
-@@ -702,10 +714,14 @@ static void msdc_set_mclk(struct msdc_ho
- sdr_set_field(host->base + MSDC_CFG,
- MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
- (mode << 12) | div);
-+ if (host->src_clk_cg)
-+ clk_prepare_enable(host->src_clk_cg);
-+ else
-+ clk_prepare_enable(clk_get_parent(host->src_clk));
-
-- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
- while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
- cpu_relax();
-+ sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
- host->sclk = sclk;
- host->mclk = hz;
- host->timing = timing;
-@@ -1825,6 +1841,11 @@ static int msdc_drv_probe(struct platfor
- goto host_free;
- }
-
-+ /*source clock control gate is optional clock*/
-+ host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
-+ if (IS_ERR(host->src_clk_cg))
-+ host->src_clk_cg = NULL;
-+
- host->irq = platform_get_irq(pdev, 0);
- if (host->irq < 0) {
- ret = -EINVAL;
diff --git a/target/linux/mediatek/patches-4.14/0158-mmc-mediatek-add-latch-ck-support.patch b/target/linux/mediatek/patches-4.14/0158-mmc-mediatek-add-latch-ck-support.patch
deleted file mode 100644
index bd86ab53a7..0000000000
--- a/target/linux/mediatek/patches-4.14/0158-mmc-mediatek-add-latch-ck-support.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From de14d1d0dc7ecf5c3e7e2a591b4f14e688fa52e6 Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:37 +0800
-Subject: [PATCH 158/224] mmc: mediatek: add latch-ck support
-
-some platform(eg.mt2701) does not support "stop clk fix", in
-this case, need set correct latch-ck to avoid crc error caused
-by stop clock block-internally.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -380,6 +380,7 @@ struct msdc_host {
- u32 sclk; /* SD/MS bus clock frequency */
- unsigned char timing;
- bool vqmmc_enabled;
-+ u32 latch_ck;
- u32 hs400_ds_delay;
- u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
- u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
-@@ -1664,6 +1665,8 @@ static int msdc_tune_data(struct mmc_hos
- u32 tune_reg = host->dev_comp->pad_tune_reg;
- int i, ret;
-
-+ sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_INT_DAT_LATCH_CK_SEL,
-+ host->latch_ck);
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
- sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- for (i = 0 ; i < PAD_DELAY_MAX; i++) {
-@@ -1776,6 +1779,9 @@ static const struct mmc_host_ops mt_msdc
- static void msdc_of_property_parse(struct platform_device *pdev,
- struct msdc_host *host)
- {
-+ of_property_read_u32(pdev->dev.of_node, "mediatek,latch-ck",
-+ &host->latch_ck);
-+
- of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
- &host->hs400_ds_delay);
-
diff --git a/target/linux/mediatek/patches-4.14/0159-mmc-mediatek-improve-eMMC-hs400-mode-read-performanc.patch b/target/linux/mediatek/patches-4.14/0159-mmc-mediatek-improve-eMMC-hs400-mode-read-performanc.patch
deleted file mode 100644
index 21a0c90486..0000000000
--- a/target/linux/mediatek/patches-4.14/0159-mmc-mediatek-improve-eMMC-hs400-mode-read-performanc.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 29e154716049310bb8c559f742bf2b460d5b6bbc Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:38 +0800
-Subject: [PATCH 159/224] mmc: mediatek: improve eMMC hs400 mode read
- performance
-
-enlarge outstanding value to improve read performance
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -81,6 +81,7 @@
- #define PAD_DS_TUNE 0x188
- #define PAD_CMD_TUNE 0x18c
- #define EMMC50_CFG0 0x208
-+#define EMMC50_CFG3 0x220
- #define SDC_FIFO_CFG 0x228
-
- /*--------------------------------------------------------------------------*/
-@@ -251,6 +252,8 @@
- #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
- #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
-
-+#define EMMC50_CFG3_OUTS_WR (0x1f << 0) /* RW */
-+
- #define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
- #define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
-
-@@ -320,6 +323,7 @@ struct msdc_save_para {
- u32 pad_ds_tune;
- u32 pad_cmd_tune;
- u32 emmc50_cfg0;
-+ u32 emmc50_cfg3;
- u32 sdc_fifo_cfg;
- };
-
-@@ -1750,6 +1754,9 @@ static int msdc_prepare_hs400_tuning(str
- writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
- /* hs400 mode must set it to 0 */
- sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
-+ /* to improve read performance, set outstanding to 2 */
-+ sdr_set_field(host->base + EMMC50_CFG3, EMMC50_CFG3_OUTS_WR, 2);
-+
- return 0;
- }
-
-@@ -2000,6 +2007,7 @@ static void msdc_save_reg(struct msdc_ho
- host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
- host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
- host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
-+ host->save_para.emmc50_cfg3 = readl(host->base + EMMC50_CFG3);
- host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
- }
-
-@@ -2017,6 +2025,7 @@ static void msdc_restore_reg(struct msdc
- writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
- writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
- writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
-+ writel(host->save_para.emmc50_cfg3, host->base + EMMC50_CFG3);
- writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
- }
-
diff --git a/target/linux/mediatek/patches-4.14/0160-mmc-mediatek-perfer-to-use-rise-edge-latching-for-cm.patch b/target/linux/mediatek/patches-4.14/0160-mmc-mediatek-perfer-to-use-rise-edge-latching-for-cm.patch
deleted file mode 100644
index 756797b74e..0000000000
--- a/target/linux/mediatek/patches-4.14/0160-mmc-mediatek-perfer-to-use-rise-edge-latching-for-cm.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 81fdc4983e33ef01935a9bf01187951aad34e2ac Mon Sep 17 00:00:00 2001
-From: Chaotian Jing <chaotian.jing@mediatek.com>
-Date: Mon, 16 Oct 2017 09:46:39 +0800
-Subject: [PATCH 160/224] mmc: mediatek: perfer to use rise edge latching for
- cmd line
-
-data lines have applied to perfer to use rise edge, also need
-apply it to cmd line.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Tested-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -1552,7 +1552,8 @@ static int msdc_tune_response(struct mmc
- }
- final_rise_delay = get_best_delay(host, rise_delay);
- /* if rising edge has enough margin, then do not scan falling edge */
-- if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
-+ if (final_rise_delay.maxlen >= 12 ||
-+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
- goto skip_fall;
-
- sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
diff --git a/target/linux/mediatek/patches-4.14/0161-pwm-mediatek-Add-MT2712-MT7622-support.patch b/target/linux/mediatek/patches-4.14/0161-pwm-mediatek-Add-MT2712-MT7622-support.patch
deleted file mode 100644
index bca6ed5bbb..0000000000
--- a/target/linux/mediatek/patches-4.14/0161-pwm-mediatek-Add-MT2712-MT7622-support.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 7cc8226e45b2c6b9f06ce82ba6995b8f911afe25 Mon Sep 17 00:00:00 2001
-From: Zhi Mao <zhi.mao@mediatek.com>
-Date: Wed, 25 Oct 2017 18:11:01 +0800
-Subject: [PATCH 161/224] pwm: mediatek: Add MT2712/MT7622 support
-
-Add support for MT2712 and MT7622. Due to register offset address of
-pwm7 for MT2712 is not fixed 0x40, add mtk_pwm_reg_offset array for PWM
-register offset.
-
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
-Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
----
- drivers/pwm/pwm-mediatek.c | 53 ++++++++++++++++++++++++++++++++++++++--------
- 1 file changed, 44 insertions(+), 9 deletions(-)
-
---- a/drivers/pwm/pwm-mediatek.c
-+++ b/drivers/pwm/pwm-mediatek.c
-@@ -16,6 +16,7 @@
- #include <linux/module.h>
- #include <linux/clk.h>
- #include <linux/of.h>
-+#include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/pwm.h>
- #include <linux/slab.h>
-@@ -40,11 +41,19 @@ enum {
- MTK_CLK_PWM3,
- MTK_CLK_PWM4,
- MTK_CLK_PWM5,
-+ MTK_CLK_PWM6,
-+ MTK_CLK_PWM7,
-+ MTK_CLK_PWM8,
- MTK_CLK_MAX,
- };
-
--static const char * const mtk_pwm_clk_name[] = {
-- "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
-+static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
-+ "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5", "pwm6", "pwm7",
-+ "pwm8"
-+};
-+
-+struct mtk_pwm_platform_data {
-+ unsigned int num_pwms;
- };
-
- /**
-@@ -59,6 +68,10 @@ struct mtk_pwm_chip {
- struct clk *clks[MTK_CLK_MAX];
- };
-
-+static const unsigned int mtk_pwm_reg_offset[] = {
-+ 0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
-+};
-+
- static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
- {
- return container_of(chip, struct mtk_pwm_chip, chip);
-@@ -103,14 +116,14 @@ static void mtk_pwm_clk_disable(struct p
- static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
- unsigned int offset)
- {
-- return readl(chip->regs + 0x10 + (num * 0x40) + offset);
-+ return readl(chip->regs + mtk_pwm_reg_offset[num] + offset);
- }
-
- static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
- unsigned int num, unsigned int offset,
- u32 value)
- {
-- writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
-+ writel(value, chip->regs + mtk_pwm_reg_offset[num] + offset);
- }
-
- static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-@@ -185,6 +198,7 @@ static const struct pwm_ops mtk_pwm_ops
-
- static int mtk_pwm_probe(struct platform_device *pdev)
- {
-+ const struct mtk_pwm_platform_data *data;
- struct mtk_pwm_chip *pc;
- struct resource *res;
- unsigned int i;
-@@ -194,15 +208,22 @@ static int mtk_pwm_probe(struct platform
- if (!pc)
- return -ENOMEM;
-
-+ data = of_device_get_match_data(&pdev->dev);
-+ if (data == NULL)
-+ return -EINVAL;
-+
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pc->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pc->regs))
- return PTR_ERR(pc->regs);
-
-- for (i = 0; i < MTK_CLK_MAX; i++) {
-+ for (i = 0; i < data->num_pwms + 2; i++) {
- pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
-- if (IS_ERR(pc->clks[i]))
-+ if (IS_ERR(pc->clks[i])) {
-+ dev_err(&pdev->dev, "clock: %s fail: %ld\n",
-+ mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
- return PTR_ERR(pc->clks[i]);
-+ }
- }
-
- platform_set_drvdata(pdev, pc);
-@@ -210,7 +231,7 @@ static int mtk_pwm_probe(struct platform
- pc->chip.dev = &pdev->dev;
- pc->chip.ops = &mtk_pwm_ops;
- pc->chip.base = -1;
-- pc->chip.npwm = 5;
-+ pc->chip.npwm = data->num_pwms;
-
- ret = pwmchip_add(&pc->chip);
- if (ret < 0) {
-@@ -228,9 +249,23 @@ static int mtk_pwm_remove(struct platfor
- return pwmchip_remove(&pc->chip);
- }
-
-+static const struct mtk_pwm_platform_data mt2712_pwm_data = {
-+ .num_pwms = 8,
-+};
-+
-+static const struct mtk_pwm_platform_data mt7622_pwm_data = {
-+ .num_pwms = 6,
-+};
-+
-+static const struct mtk_pwm_platform_data mt7623_pwm_data = {
-+ .num_pwms = 5,
-+};
-+
- static const struct of_device_id mtk_pwm_of_match[] = {
-- { .compatible = "mediatek,mt7623-pwm" },
-- { }
-+ { .compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data },
-+ { .compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data },
-+ { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
-+ { },
- };
- MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
-
diff --git a/target/linux/mediatek/patches-4.14/0162-mtd-nand-mtk-use-nand_reset-to-reset-NAND-devices-in.patch b/target/linux/mediatek/patches-4.14/0162-mtd-nand-mtk-use-nand_reset-to-reset-NAND-devices-in.patch
deleted file mode 100644
index 4429934765..0000000000
--- a/target/linux/mediatek/patches-4.14/0162-mtd-nand-mtk-use-nand_reset-to-reset-NAND-devices-in.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From fb607c7c1eaeb47ec2ffed99cab571892cb6af7d Mon Sep 17 00:00:00 2001
-From: Xiaolei Li <xiaolei.li@mediatek.com>
-Date: Thu, 2 Nov 2017 10:05:07 +0800
-Subject: [PATCH 162/224] mtd: nand: mtk: use nand_reset() to reset NAND
- devices in resume function
-
-Previously, we only select chips and then send reset command to a NAND
-device during resuming nand driver. There is a lack of deselecting chips.
-It is advised to reset and initialize a NAND device using nand_reset().
-
-Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/mtk_nand.c | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/nand/mtk_nand.c
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -1539,7 +1539,6 @@ static int mtk_nfc_resume(struct device
- struct mtk_nfc *nfc = dev_get_drvdata(dev);
- struct mtk_nfc_nand_chip *chip;
- struct nand_chip *nand;
-- struct mtd_info *mtd;
- int ret;
- u32 i;
-
-@@ -1552,11 +1551,8 @@ static int mtk_nfc_resume(struct device
- /* reset NAND chip if VCC was powered off */
- list_for_each_entry(chip, &nfc->chips, node) {
- nand = &chip->nand;
-- mtd = nand_to_mtd(nand);
-- for (i = 0; i < chip->nsels; i++) {
-- nand->select_chip(mtd, i);
-- nand->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-- }
-+ for (i = 0; i < chip->nsels; i++)
-+ nand_reset(nand, i);
- }
-
- return 0;
diff --git a/target/linux/mediatek/patches-4.14/0164-cpufreq-mediatek-add-mt2712-into-compatible-list.patch b/target/linux/mediatek/patches-4.14/0164-cpufreq-mediatek-add-mt2712-into-compatible-list.patch
deleted file mode 100644
index 865e82ee1d..0000000000
--- a/target/linux/mediatek/patches-4.14/0164-cpufreq-mediatek-add-mt2712-into-compatible-list.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From f027d8b7248cef5b3d3eb8ac68e1040fba340995 Mon Sep 17 00:00:00 2001
-From: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
-Date: Fri, 8 Dec 2017 14:07:55 +0800
-Subject: [PATCH 164/224] cpufreq: mediatek: add mt2712 into compatible list
-
-Support mt2712 in mediatek-cpufreq.c
-
-Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/cpufreq/mediatek-cpufreq.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/cpufreq/mediatek-cpufreq.c
-+++ b/drivers/cpufreq/mediatek-cpufreq.c
-@@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufre
- /* List of machines supported by this driver */
- static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
- { .compatible = "mediatek,mt2701", },
-+ { .compatible = "mediatek,mt2712", },
- { .compatible = "mediatek,mt7622", },
- { .compatible = "mediatek,mt7623", },
- { .compatible = "mediatek,mt817x", },
diff --git a/target/linux/mediatek/patches-4.14/0165-mtd-nand-mtk-update-DT-bindings.patch b/target/linux/mediatek/patches-4.14/0165-mtd-nand-mtk-update-DT-bindings.patch
deleted file mode 100644
index d49f8cba09..0000000000
--- a/target/linux/mediatek/patches-4.14/0165-mtd-nand-mtk-update-DT-bindings.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 42611c6d9f12d16ce4247d76b16218e54ef5b949 Mon Sep 17 00:00:00 2001
-From: RogerCC Lin <rogercc.lin@mediatek.com>
-Date: Thu, 30 Nov 2017 22:10:43 +0800
-Subject: [PATCH 165/224] mtd: nand: mtk: update DT bindings
-
-Add MT7622 NAND Flash Controller dt bindings documentation.
-
-Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- Documentation/devicetree/bindings/mtd/mtk-nand.txt | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
-+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
-@@ -12,8 +12,10 @@ tree nodes.
-
- The first part of NFC is NAND Controller Interface (NFI) HW.
- Required NFI properties:
--- compatible: Should be one of "mediatek,mt2701-nfc",
-- "mediatek,mt2712-nfc".
-+- compatible: Should be one of
-+ "mediatek,mt2701-nfc",
-+ "mediatek,mt2712-nfc",
-+ "mediatek,mt7622-nfc".
- - reg: Base physical address and size of NFI.
- - interrupts: Interrupts of NFI.
- - clocks: NFI required clocks.
-@@ -142,7 +144,10 @@ Example:
- ==============
-
- Required BCH properties:
--- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc".
-+- compatible: Should be one of
-+ "mediatek,mt2701-ecc",
-+ "mediatek,mt2712-ecc",
-+ "mediatek,mt7622-ecc".
- - reg: Base physical address and size of ECC.
- - interrupts: Interrupts of ECC.
- - clocks: ECC required clocks.
diff --git a/target/linux/mediatek/patches-4.14/0166-mtd-nand-mtk-Support-different-MTK-NAND-flash-contro.patch b/target/linux/mediatek/patches-4.14/0166-mtd-nand-mtk-Support-different-MTK-NAND-flash-contro.patch
deleted file mode 100644
index 63e1dad188..0000000000
--- a/target/linux/mediatek/patches-4.14/0166-mtd-nand-mtk-Support-different-MTK-NAND-flash-contro.patch
+++ /dev/null
@@ -1,380 +0,0 @@
-From fd1a1eabf2473e769b5cafc704e0336d11f61961 Mon Sep 17 00:00:00 2001
-From: RogerCC Lin <rogercc.lin@mediatek.com>
-Date: Thu, 30 Nov 2017 22:10:44 +0800
-Subject: [PATCH 166/224] mtd: nand: mtk: Support different MTK NAND flash
- controller IP
-
-MT7622 uses an MTK's earlier NAND flash controller IP which support
-different sector size, max spare size per sector and paraity bits...,
-some register's offset and definition also been changed in the NAND
-flash controller, this patch is the preparation to support MT7622
-NAND flash controller.
-
-MT7622 NFC and ECC engine are similar to MT2701's, except below
-differences:
-(1)MT7622 NFC's max sector size(ECC data size) is 512 bytes, and
- MT2701's is 1024, and MT7622's max sector number is 8.
-(2)The parity bit of MT7622 is 13, MT2701 is 14.
-(3)MT7622 ECC supports less ECC strength, max to 16 bit ecc strength.
-(4)MT7622 supports less spare size per sector, max spare size per
- sector is 28 bytes.
-(5)Some register's offset are different, include ECC_ENCIRQ_EN,
- ECC_ENCIRQ_STA, ECC_DECDONE, ECC_DECIRQ_EN and ECC_DECIRQ_STA.
-(6)ENC_MODE of ECC_ENCCNFG register is moved from bit 5-6 to bit 4-5.
-
-Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/mtk_ecc.c | 100 ++++++++++++++++++++++++++++++--------------
- drivers/mtd/nand/mtk_ecc.h | 3 +-
- drivers/mtd/nand/mtk_nand.c | 27 ++++++++----
- 3 files changed, 89 insertions(+), 41 deletions(-)
-
---- a/drivers/mtd/nand/mtk_ecc.c
-+++ b/drivers/mtd/nand/mtk_ecc.c
-@@ -34,34 +34,28 @@
-
- #define ECC_ENCCON (0x00)
- #define ECC_ENCCNFG (0x04)
--#define ECC_MODE_SHIFT (5)
- #define ECC_MS_SHIFT (16)
- #define ECC_ENCDIADDR (0x08)
- #define ECC_ENCIDLE (0x0C)
--#define ECC_ENCIRQ_EN (0x80)
--#define ECC_ENCIRQ_STA (0x84)
- #define ECC_DECCON (0x100)
- #define ECC_DECCNFG (0x104)
- #define DEC_EMPTY_EN BIT(31)
- #define DEC_CNFG_CORRECT (0x3 << 12)
- #define ECC_DECIDLE (0x10C)
- #define ECC_DECENUM0 (0x114)
--#define ECC_DECDONE (0x124)
--#define ECC_DECIRQ_EN (0x200)
--#define ECC_DECIRQ_STA (0x204)
-
- #define ECC_TIMEOUT (500000)
-
- #define ECC_IDLE_REG(op) ((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
- #define ECC_CTL_REG(op) ((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
--#define ECC_IRQ_REG(op) ((op) == ECC_ENCODE ? \
-- ECC_ENCIRQ_EN : ECC_DECIRQ_EN)
-
- struct mtk_ecc_caps {
- u32 err_mask;
- const u8 *ecc_strength;
-+ const u32 *ecc_regs;
- u8 num_ecc_strength;
-- u32 encode_parity_reg0;
-+ u8 ecc_mode_shift;
-+ u32 parity_bits;
- int pg_irq_sel;
- };
-
-@@ -89,6 +83,33 @@ static const u8 ecc_strength_mt2712[] =
- 40, 44, 48, 52, 56, 60, 68, 72, 80
- };
-
-+enum mtk_ecc_regs {
-+ ECC_ENCPAR00,
-+ ECC_ENCIRQ_EN,
-+ ECC_ENCIRQ_STA,
-+ ECC_DECDONE,
-+ ECC_DECIRQ_EN,
-+ ECC_DECIRQ_STA,
-+};
-+
-+static int mt2701_ecc_regs[] = {
-+ [ECC_ENCPAR00] = 0x10,
-+ [ECC_ENCIRQ_EN] = 0x80,
-+ [ECC_ENCIRQ_STA] = 0x84,
-+ [ECC_DECDONE] = 0x124,
-+ [ECC_DECIRQ_EN] = 0x200,
-+ [ECC_DECIRQ_STA] = 0x204,
-+};
-+
-+static int mt2712_ecc_regs[] = {
-+ [ECC_ENCPAR00] = 0x300,
-+ [ECC_ENCIRQ_EN] = 0x80,
-+ [ECC_ENCIRQ_STA] = 0x84,
-+ [ECC_DECDONE] = 0x124,
-+ [ECC_DECIRQ_EN] = 0x200,
-+ [ECC_DECIRQ_STA] = 0x204,
-+};
-+
- static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
- enum mtk_ecc_operation op)
- {
-@@ -107,32 +128,30 @@ static inline void mtk_ecc_wait_idle(str
- static irqreturn_t mtk_ecc_irq(int irq, void *id)
- {
- struct mtk_ecc *ecc = id;
-- enum mtk_ecc_operation op;
- u32 dec, enc;
-
-- dec = readw(ecc->regs + ECC_DECIRQ_STA) & ECC_IRQ_EN;
-+ dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA])
-+ & ECC_IRQ_EN;
- if (dec) {
-- op = ECC_DECODE;
-- dec = readw(ecc->regs + ECC_DECDONE);
-+ dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
- if (dec & ecc->sectors) {
- /*
- * Clear decode IRQ status once again to ensure that
- * there will be no extra IRQ.
- */
-- readw(ecc->regs + ECC_DECIRQ_STA);
-+ readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA]);
- ecc->sectors = 0;
- complete(&ecc->done);
- } else {
- return IRQ_HANDLED;
- }
- } else {
-- enc = readl(ecc->regs + ECC_ENCIRQ_STA) & ECC_IRQ_EN;
-- if (enc) {
-- op = ECC_ENCODE;
-+ enc = readl(ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_STA])
-+ & ECC_IRQ_EN;
-+ if (enc)
- complete(&ecc->done);
-- } else {
-+ else
- return IRQ_NONE;
-- }
- }
-
- return IRQ_HANDLED;
-@@ -160,7 +179,7 @@ static int mtk_ecc_config(struct mtk_ecc
- /* configure ECC encoder (in bits) */
- enc_sz = config->len << 3;
-
-- reg = ecc_bit | (config->mode << ECC_MODE_SHIFT);
-+ reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
- reg |= (enc_sz << ECC_MS_SHIFT);
- writel(reg, ecc->regs + ECC_ENCCNFG);
-
-@@ -171,9 +190,9 @@ static int mtk_ecc_config(struct mtk_ecc
- } else {
- /* configure ECC decoder (in bits) */
- dec_sz = (config->len << 3) +
-- config->strength * ECC_PARITY_BITS;
-+ config->strength * ecc->caps->parity_bits;
-
-- reg = ecc_bit | (config->mode << ECC_MODE_SHIFT);
-+ reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
- reg |= (dec_sz << ECC_MS_SHIFT) | DEC_CNFG_CORRECT;
- reg |= DEC_EMPTY_EN;
- writel(reg, ecc->regs + ECC_DECCNFG);
-@@ -291,7 +310,12 @@ int mtk_ecc_enable(struct mtk_ecc *ecc,
- */
- if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
- reg_val |= ECC_PG_IRQ_SEL;
-- writew(reg_val, ecc->regs + ECC_IRQ_REG(op));
-+ if (op == ECC_ENCODE)
-+ writew(reg_val, ecc->regs +
-+ ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
-+ else
-+ writew(reg_val, ecc->regs +
-+ ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
- }
-
- writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
-@@ -310,13 +334,17 @@ void mtk_ecc_disable(struct mtk_ecc *ecc
-
- /* disable it */
- mtk_ecc_wait_idle(ecc, op);
-- if (op == ECC_DECODE)
-+ if (op == ECC_DECODE) {
- /*
- * Clear decode IRQ status in case there is a timeout to wait
- * decode IRQ.
- */
-- readw(ecc->regs + ECC_DECIRQ_STA);
-- writew(0, ecc->regs + ECC_IRQ_REG(op));
-+ readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
-+ writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
-+ } else {
-+ writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
-+ }
-+
- writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
-
- mutex_unlock(&ecc->lock);
-@@ -367,11 +395,11 @@ int mtk_ecc_encode(struct mtk_ecc *ecc,
- mtk_ecc_wait_idle(ecc, ECC_ENCODE);
-
- /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
-- len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
-+ len = (config->strength * ecc->caps->parity_bits + 7) >> 3;
-
- /* write the parity bytes generated by the ECC back to temp buffer */
- __ioread32_copy(ecc->eccdata,
-- ecc->regs + ecc->caps->encode_parity_reg0,
-+ ecc->regs + ecc->caps->ecc_regs[ECC_ENCPAR00],
- round_up(len, 4));
-
- /* copy into possibly unaligned OOB region with actual length */
-@@ -404,19 +432,29 @@ void mtk_ecc_adjust_strength(struct mtk_
- }
- EXPORT_SYMBOL(mtk_ecc_adjust_strength);
-
-+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
-+{
-+ return ecc->caps->parity_bits;
-+}
-+EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
-+
- static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
- .err_mask = 0x3f,
- .ecc_strength = ecc_strength_mt2701,
-+ .ecc_regs = mt2701_ecc_regs,
- .num_ecc_strength = 20,
-- .encode_parity_reg0 = 0x10,
-+ .ecc_mode_shift = 5,
-+ .parity_bits = 14,
- .pg_irq_sel = 0,
- };
-
- static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
- .err_mask = 0x7f,
- .ecc_strength = ecc_strength_mt2712,
-+ .ecc_regs = mt2712_ecc_regs,
- .num_ecc_strength = 23,
-- .encode_parity_reg0 = 0x300,
-+ .ecc_mode_shift = 5,
-+ .parity_bits = 14,
- .pg_irq_sel = 1,
- };
-
-@@ -452,7 +490,7 @@ static int mtk_ecc_probe(struct platform
-
- max_eccdata_size = ecc->caps->num_ecc_strength - 1;
- max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
-- max_eccdata_size = (max_eccdata_size * ECC_PARITY_BITS + 7) >> 3;
-+ max_eccdata_size = (max_eccdata_size * ecc->caps->parity_bits + 7) >> 3;
- max_eccdata_size = round_up(max_eccdata_size, 4);
- ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
- if (!ecc->eccdata)
---- a/drivers/mtd/nand/mtk_ecc.h
-+++ b/drivers/mtd/nand/mtk_ecc.h
-@@ -14,8 +14,6 @@
-
- #include <linux/types.h>
-
--#define ECC_PARITY_BITS (14)
--
- enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1};
- enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE};
-
-@@ -43,6 +41,7 @@ int mtk_ecc_wait_done(struct mtk_ecc *,
- int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
- void mtk_ecc_disable(struct mtk_ecc *);
- void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
-+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc);
-
- struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
- void mtk_ecc_release(struct mtk_ecc *);
---- a/drivers/mtd/nand/mtk_nand.c
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -97,7 +97,6 @@
-
- #define MTK_TIMEOUT (500000)
- #define MTK_RESET_TIMEOUT (1000000)
--#define MTK_MAX_SECTOR (16)
- #define MTK_NAND_MAX_NSELS (2)
- #define MTK_NFC_MIN_SPARE (16)
- #define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
-@@ -109,6 +108,8 @@ struct mtk_nfc_caps {
- u8 num_spare_size;
- u8 pageformat_spare_shift;
- u8 nfi_clk_div;
-+ u8 max_sector;
-+ u32 max_sector_size;
- };
-
- struct mtk_nfc_bad_mark_ctl {
-@@ -450,7 +451,7 @@ static inline u8 mtk_nfc_read_byte(struc
- * set to max sector to allow the HW to continue reading over
- * unaligned accesses
- */
-- reg = (MTK_MAX_SECTOR << CON_SEC_SHIFT) | CON_BRD;
-+ reg = (nfc->caps->max_sector << CON_SEC_SHIFT) | CON_BRD;
- nfi_writel(nfc, reg, NFI_CON);
-
- /* trigger to fetch data */
-@@ -481,7 +482,7 @@ static void mtk_nfc_write_byte(struct mt
- reg = nfi_readw(nfc, NFI_CNFG) | CNFG_BYTE_RW;
- nfi_writew(nfc, reg, NFI_CNFG);
-
-- reg = MTK_MAX_SECTOR << CON_SEC_SHIFT | CON_BWR;
-+ reg = nfc->caps->max_sector << CON_SEC_SHIFT | CON_BWR;
- nfi_writel(nfc, reg, NFI_CON);
-
- nfi_writew(nfc, STAR_EN, NFI_STRDATA);
-@@ -1125,9 +1126,11 @@ static void mtk_nfc_set_fdm(struct mtk_n
- {
- struct nand_chip *nand = mtd_to_nand(mtd);
- struct mtk_nfc_nand_chip *chip = to_mtk_nand(nand);
-+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
- u32 ecc_bytes;
-
-- ecc_bytes = DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8);
-+ ecc_bytes = DIV_ROUND_UP(nand->ecc.strength *
-+ mtk_ecc_get_parity_bits(nfc->ecc), 8);
-
- fdm->reg_size = chip->spare_per_sector - ecc_bytes;
- if (fdm->reg_size > NFI_FDM_MAX_SIZE)
-@@ -1207,7 +1210,8 @@ static int mtk_nfc_ecc_init(struct devic
- * this controller only supports 512 and 1024 sizes
- */
- if (nand->ecc.size < 1024) {
-- if (mtd->writesize > 512) {
-+ if (mtd->writesize > 512 &&
-+ nfc->caps->max_sector_size > 512) {
- nand->ecc.size = 1024;
- nand->ecc.strength <<= 1;
- } else {
-@@ -1222,7 +1226,8 @@ static int mtk_nfc_ecc_init(struct devic
- return ret;
-
- /* calculate oob bytes except ecc parity data */
-- free = ((nand->ecc.strength * ECC_PARITY_BITS) + 7) >> 3;
-+ free = (nand->ecc.strength * mtk_ecc_get_parity_bits(nfc->ecc)
-+ + 7) >> 3;
- free = spare - free;
-
- /*
-@@ -1232,10 +1237,12 @@ static int mtk_nfc_ecc_init(struct devic
- */
- if (free > NFI_FDM_MAX_SIZE) {
- spare -= NFI_FDM_MAX_SIZE;
-- nand->ecc.strength = (spare << 3) / ECC_PARITY_BITS;
-+ nand->ecc.strength = (spare << 3) /
-+ mtk_ecc_get_parity_bits(nfc->ecc);
- } else if (free < 0) {
- spare -= NFI_FDM_MIN_SIZE;
-- nand->ecc.strength = (spare << 3) / ECC_PARITY_BITS;
-+ nand->ecc.strength = (spare << 3) /
-+ mtk_ecc_get_parity_bits(nfc->ecc);
- }
- }
-
-@@ -1388,6 +1395,8 @@ static const struct mtk_nfc_caps mtk_nfc
- .num_spare_size = 16,
- .pageformat_spare_shift = 4,
- .nfi_clk_div = 1,
-+ .max_sector = 16,
-+ .max_sector_size = 1024,
- };
-
- static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = {
-@@ -1395,6 +1404,8 @@ static const struct mtk_nfc_caps mtk_nfc
- .num_spare_size = 19,
- .pageformat_spare_shift = 16,
- .nfi_clk_div = 2,
-+ .max_sector = 16,
-+ .max_sector_size = 1024,
- };
-
- static const struct of_device_id mtk_nfc_id_table[] = {
diff --git a/target/linux/mediatek/patches-4.14/0167-mtd-nand-mtk-Support-MT7622-NAND-flash-controller.patch b/target/linux/mediatek/patches-4.14/0167-mtd-nand-mtk-Support-MT7622-NAND-flash-controller.patch
deleted file mode 100644
index 5cf99c14bc..0000000000
--- a/target/linux/mediatek/patches-4.14/0167-mtd-nand-mtk-Support-MT7622-NAND-flash-controller.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From f395a149fbbc190afbadbdcf9ce95f85f78da22f Mon Sep 17 00:00:00 2001
-From: RogerCC Lin <rogercc.lin@mediatek.com>
-Date: Thu, 30 Nov 2017 22:10:45 +0800
-Subject: [PATCH 167/224] mtd: nand: mtk: Support MT7622 NAND flash controller.
-
-Add tables to support MT7622 NAND flash controller.
-
-Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/mtk_ecc.c | 26 ++++++++++++++++++++++++++
- drivers/mtd/nand/mtk_nand.c | 16 ++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/drivers/mtd/nand/mtk_ecc.c
-+++ b/drivers/mtd/nand/mtk_ecc.c
-@@ -83,6 +83,10 @@ static const u8 ecc_strength_mt2712[] =
- 40, 44, 48, 52, 56, 60, 68, 72, 80
- };
-
-+static const u8 ecc_strength_mt7622[] = {
-+ 4, 6, 8, 10, 12, 14, 16
-+};
-+
- enum mtk_ecc_regs {
- ECC_ENCPAR00,
- ECC_ENCIRQ_EN,
-@@ -110,6 +114,15 @@ static int mt2712_ecc_regs[] = {
- [ECC_DECIRQ_STA] = 0x204,
- };
-
-+static int mt7622_ecc_regs[] = {
-+ [ECC_ENCPAR00] = 0x10,
-+ [ECC_ENCIRQ_EN] = 0x30,
-+ [ECC_ENCIRQ_STA] = 0x34,
-+ [ECC_DECDONE] = 0x11c,
-+ [ECC_DECIRQ_EN] = 0x140,
-+ [ECC_DECIRQ_STA] = 0x144,
-+};
-+
- static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
- enum mtk_ecc_operation op)
- {
-@@ -458,6 +471,16 @@ static const struct mtk_ecc_caps mtk_ecc
- .pg_irq_sel = 1,
- };
-
-+static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
-+ .err_mask = 0x3f,
-+ .ecc_strength = ecc_strength_mt7622,
-+ .ecc_regs = mt7622_ecc_regs,
-+ .num_ecc_strength = 7,
-+ .ecc_mode_shift = 4,
-+ .parity_bits = 13,
-+ .pg_irq_sel = 0,
-+};
-+
- static const struct of_device_id mtk_ecc_dt_match[] = {
- {
- .compatible = "mediatek,mt2701-ecc",
-@@ -465,6 +488,9 @@ static const struct of_device_id mtk_ecc
- }, {
- .compatible = "mediatek,mt2712-ecc",
- .data = &mtk_ecc_caps_mt2712,
-+ }, {
-+ .compatible = "mediatek,mt7622-ecc",
-+ .data = &mtk_ecc_caps_mt7622,
- },
- {},
- };
---- a/drivers/mtd/nand/mtk_nand.c
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -174,6 +174,10 @@ static const u8 spare_size_mt2712[] = {
- 74
- };
-
-+static const u8 spare_size_mt7622[] = {
-+ 16, 26, 27, 28
-+};
-+
- static inline struct mtk_nfc_nand_chip *to_mtk_nand(struct nand_chip *nand)
- {
- return container_of(nand, struct mtk_nfc_nand_chip, nand);
-@@ -1408,6 +1412,15 @@ static const struct mtk_nfc_caps mtk_nfc
- .max_sector_size = 1024,
- };
-
-+static const struct mtk_nfc_caps mtk_nfc_caps_mt7622 = {
-+ .spare_size = spare_size_mt7622,
-+ .num_spare_size = 4,
-+ .pageformat_spare_shift = 4,
-+ .nfi_clk_div = 1,
-+ .max_sector = 8,
-+ .max_sector_size = 512,
-+};
-+
- static const struct of_device_id mtk_nfc_id_table[] = {
- {
- .compatible = "mediatek,mt2701-nfc",
-@@ -1415,6 +1428,9 @@ static const struct of_device_id mtk_nfc
- }, {
- .compatible = "mediatek,mt2712-nfc",
- .data = &mtk_nfc_caps_mt2712,
-+ }, {
-+ .compatible = "mediatek,mt7622-nfc",
-+ .data = &mtk_nfc_caps_mt7622,
- },
- {}
- };
diff --git a/target/linux/mediatek/patches-4.14/0168-mmc-dt-bindings-add-mmc-support-to-MT7623-SoC.patch b/target/linux/mediatek/patches-4.14/0168-mmc-dt-bindings-add-mmc-support-to-MT7623-SoC.patch
deleted file mode 100644
index d167281249..0000000000
--- a/target/linux/mediatek/patches-4.14/0168-mmc-dt-bindings-add-mmc-support-to-MT7623-SoC.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From bb37b1aa5d1aadfcecd9189a653856099fbed507 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 7 Dec 2017 14:43:22 +0800
-Subject: [PATCH 168/224] mmc: dt-bindings: add mmc support to MT7623 SoC
-
-Add the devicetree binding for MT7623 SoC using MT2701 as the fallback.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-@@ -12,6 +12,8 @@ Required properties:
- "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
- "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
- "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
-+ "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
-+
- - reg: physical base address of the controller and length
- - interrupts: Should contain MSDC interrupt number
- - clocks: Should contain phandle for the clock feeding the MMC controller
diff --git a/target/linux/mediatek/patches-4.14/0169-dt-bindings-pinctrl-add-bindings-for-MediaTek-MT7622.patch b/target/linux/mediatek/patches-4.14/0169-dt-bindings-pinctrl-add-bindings-for-MediaTek-MT7622.patch
deleted file mode 100644
index 769de29bc3..0000000000
--- a/target/linux/mediatek/patches-4.14/0169-dt-bindings-pinctrl-add-bindings-for-MediaTek-MT7622.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From 4e4c2d695a5daf6dc55b8713af720ef15b52c0e7 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Tue, 12 Dec 2017 14:24:18 +0800
-Subject: [PATCH 169/224] dt-bindings: pinctrl: add bindings for MediaTek
- MT7622 SoC
-
-Add devicetree bindings for MediaTek MT7622 pinctrl driver.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Biao Huang <biao.huang@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 351 +++++++++++++++++++++
- 1 file changed, 351 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
-@@ -0,0 +1,351 @@
-+== MediaTek MT7622 pinctrl controller ==
-+
-+Required properties for the root node:
-+ - compatible: Should be one of the following
-+ "mediatek,mt7622-pinctrl" for MT7622 SoC
-+ - reg: offset and length of the pinctrl space
-+
-+ - gpio-controller: Marks the device node as a GPIO controller.
-+ - #gpio-cells: Should be two. The first cell is the pin number and the
-+ second is the GPIO flags.
-+
-+Please refer to pinctrl-bindings.txt in this directory for details of the
-+common pinctrl bindings used by client devices, including the meaning of the
-+phrase "pin configuration node".
-+
-+MT7622 pin configuration nodes act as a container for an arbitrary number of
-+subnodes. Each of these subnodes represents some desired configuration for a
-+pin, a group, or a list of pins or groups. This configuration can include the
-+mux function to select on those pin(s)/group(s), and various pin configuration
-+parameters, such as pull-up, slew rate, etc.
-+
-+We support 2 types of configuration nodes. Those nodes can be either pinmux
-+nodes or pinconf nodes. Each configuration node can consist of multiple nodes
-+describing the pinmux and pinconf options.
-+
-+The name of each subnode doesn't matter as long as it is unique; all subnodes
-+should be enumerated and processed purely based on their content.
-+
-+== pinmux nodes content ==
-+
-+The following generic properties as defined in pinctrl-bindings.txt are valid
-+to specify in a pinmux subnode:
-+
-+Required properties are:
-+ - groups: An array of strings. Each string contains the name of a group.
-+ Valid values for these names are listed below.
-+ - function: A string containing the name of the function to mux to the
-+ group. Valid values for function names are listed below.
-+
-+== pinconf nodes content ==
-+
-+The following generic properties as defined in pinctrl-bindings.txt are valid
-+to specify in a pinconf subnode:
-+
-+Required properties are:
-+ - pins: An array of strings. Each string contains the name of a pin.
-+ Valid values for these names are listed below.
-+ - groups: An array of strings. Each string contains the name of a group.
-+ Valid values for these names are listed below.
-+
-+Optional properies are:
-+ bias-disable, bias-pull, bias-pull-down, input-enable,
-+ input-schmitt-enable, input-schmitt-disable, output-enable
-+ output-low, output-high, drive-strength, slew-rate
-+
-+ Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for
-+ slower slew rate respectively.
-+ Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
-+
-+The following specific properties as defined are valid to specify in a pinconf
-+subnode:
-+
-+Optional properties are:
-+ - mediatek,tdsel: An integer describing the steps for output level shifter duty
-+ cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-+ to 15.
-+ - mediatek,rdsel: An integer describing the steps for input level shifter duty
-+ cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-+ to 63.
-+
-+== Valid values for pins, function and groups on MT7622 ==
-+
-+Valid values for pins are:
-+pins can be referenced via the pin names as the below table shown and the
-+related physical number is also put ahead of those names which helps cross
-+references to pins between groups to know whether pins assignment conflict
-+happens among devices try to acquire those available pins.
-+
-+ Pin #: Valid values for pins
-+ -----------------------------
-+ PIN 0: "GPIO_A"
-+ PIN 1: "I2S1_IN"
-+ PIN 2: "I2S1_OUT"
-+ PIN 3: "I2S_BCLK"
-+ PIN 4: "I2S_WS"
-+ PIN 5: "I2S_MCLK"
-+ PIN 6: "TXD0"
-+ PIN 7: "RXD0"
-+ PIN 8: "SPI_WP"
-+ PIN 9: "SPI_HOLD"
-+ PIN 10: "SPI_CLK"
-+ PIN 11: "SPI_MOSI"
-+ PIN 12: "SPI_MISO"
-+ PIN 13: "SPI_CS"
-+ PIN 14: "I2C_SDA"
-+ PIN 15: "I2C_SCL"
-+ PIN 16: "I2S2_IN"
-+ PIN 17: "I2S3_IN"
-+ PIN 18: "I2S4_IN"
-+ PIN 19: "I2S2_OUT"
-+ PIN 20: "I2S3_OUT"
-+ PIN 21: "I2S4_OUT"
-+ PIN 22: "GPIO_B"
-+ PIN 23: "MDC"
-+ PIN 24: "MDIO"
-+ PIN 25: "G2_TXD0"
-+ PIN 26: "G2_TXD1"
-+ PIN 27: "G2_TXD2"
-+ PIN 28: "G2_TXD3"
-+ PIN 29: "G2_TXEN"
-+ PIN 30: "G2_TXC"
-+ PIN 31: "G2_RXD0"
-+ PIN 32: "G2_RXD1"
-+ PIN 33: "G2_RXD2"
-+ PIN 34: "G2_RXD3"
-+ PIN 35: "G2_RXDV"
-+ PIN 36: "G2_RXC"
-+ PIN 37: "NCEB"
-+ PIN 38: "NWEB"
-+ PIN 39: "NREB"
-+ PIN 40: "NDL4"
-+ PIN 41: "NDL5"
-+ PIN 42: "NDL6"
-+ PIN 43: "NDL7"
-+ PIN 44: "NRB"
-+ PIN 45: "NCLE"
-+ PIN 46: "NALE"
-+ PIN 47: "NDL0"
-+ PIN 48: "NDL1"
-+ PIN 49: "NDL2"
-+ PIN 50: "NDL3"
-+ PIN 51: "MDI_TP_P0"
-+ PIN 52: "MDI_TN_P0"
-+ PIN 53: "MDI_RP_P0"
-+ PIN 54: "MDI_RN_P0"
-+ PIN 55: "MDI_TP_P1"
-+ PIN 56: "MDI_TN_P1"
-+ PIN 57: "MDI_RP_P1"
-+ PIN 58: "MDI_RN_P1"
-+ PIN 59: "MDI_RP_P2"
-+ PIN 60: "MDI_RN_P2"
-+ PIN 61: "MDI_TP_P2"
-+ PIN 62: "MDI_TN_P2"
-+ PIN 63: "MDI_TP_P3"
-+ PIN 64: "MDI_TN_P3"
-+ PIN 65: "MDI_RP_P3"
-+ PIN 66: "MDI_RN_P3"
-+ PIN 67: "MDI_RP_P4"
-+ PIN 68: "MDI_RN_P4"
-+ PIN 69: "MDI_TP_P4"
-+ PIN 70: "MDI_TN_P4"
-+ PIN 71: "PMIC_SCL"
-+ PIN 72: "PMIC_SDA"
-+ PIN 73: "SPIC1_CLK"
-+ PIN 74: "SPIC1_MOSI"
-+ PIN 75: "SPIC1_MISO"
-+ PIN 76: "SPIC1_CS"
-+ PIN 77: "GPIO_D"
-+ PIN 78: "WATCHDOG"
-+ PIN 79: "RTS3_N"
-+ PIN 80: "CTS3_N"
-+ PIN 81: "TXD3"
-+ PIN 82: "RXD3"
-+ PIN 83: "PERST0_N"
-+ PIN 84: "PERST1_N"
-+ PIN 85: "WLED_N"
-+ PIN 86: "EPHY_LED0_N"
-+ PIN 87: "AUXIN0"
-+ PIN 88: "AUXIN1"
-+ PIN 89: "AUXIN2"
-+ PIN 90: "AUXIN3"
-+ PIN 91: "TXD4"
-+ PIN 92: "RXD4"
-+ PIN 93: "RTS4_N"
-+ PIN 94: "CST4_N"
-+ PIN 95: "PWM1"
-+ PIN 96: "PWM2"
-+ PIN 97: "PWM3"
-+ PIN 98: "PWM4"
-+ PIN 99: "PWM5"
-+ PIN 100: "PWM6"
-+ PIN 101: "PWM7"
-+ PIN 102: "GPIO_E"
-+
-+Valid values for function are:
-+ "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
-+ "pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog"
-+
-+Valid values for groups are:
-+additional data is put followingly with valid value allowing us to know which
-+applicable function and which relevant pins (in pin#) are able applied for that
-+group.
-+
-+ Valid value function pins (in pin#)
-+ -------------------------------------------------------------------------
-+ "emmc" "emmc" 40, 41, 42, 43, 44, 45,
-+ 47, 48, 49, 50
-+ "emmc_rst" "emmc" 37
-+ "esw" "eth" 51, 52, 53, 54, 55, 56,
-+ 57, 58, 59, 60, 61, 62,
-+ 63, 64, 65, 66, 67, 68,
-+ 69, 70
-+ "esw_p0_p1" "eth" 51, 52, 53, 54, 55, 56,
-+ 57, 58
-+ "esw_p2_p3_p4" "eth" 59, 60, 61, 62, 63, 64,
-+ 65, 66, 67, 68, 69, 70
-+ "rgmii_via_esw" "eth" 59, 60, 61, 62, 63, 64,
-+ 65, 66, 67, 68, 69, 70
-+ "rgmii_via_gmac1" "eth" 59, 60, 61, 62, 63, 64,
-+ 65, 66, 67, 68, 69, 70
-+ "rgmii_via_gmac2" "eth" 25, 26, 27, 28, 29, 30,
-+ 31, 32, 33, 34, 35, 36
-+ "mdc_mdio" "eth" 23, 24
-+ "i2c0" "i2c" 14, 15
-+ "i2c1_0" "i2c" 55, 56
-+ "i2c1_1" "i2c" 73, 74
-+ "i2c1_2" "i2c" 87, 88
-+ "i2c2_0" "i2c" 57, 58
-+ "i2c2_1" "i2c" 75, 76
-+ "i2c2_2" "i2c" 89, 90
-+ "i2s_in_mclk_bclk_ws" "i2s" 3, 4, 5
-+ "i2s1_in_data" "i2s" 1
-+ "i2s2_in_data" "i2s" 16
-+ "i2s3_in_data" "i2s" 17
-+ "i2s4_in_data" "i2s" 18
-+ "i2s_out_mclk_bclk_ws" "i2s" 3, 4, 5
-+ "i2s1_out_data" "i2s" 2
-+ "i2s2_out_data" "i2s" 19
-+ "i2s3_out_data" "i2s" 20
-+ "i2s4_out_data" "i2s" 21
-+ "ir_0_tx" "ir" 16
-+ "ir_1_tx" "ir" 59
-+ "ir_2_tx" "ir" 99
-+ "ir_0_rx" "ir" 17
-+ "ir_1_rx" "ir" 60
-+ "ir_2_rx" "ir" 100
-+ "ephy_leds" "led" 86, 91, 92, 93, 94
-+ "ephy0_led" "led" 86
-+ "ephy1_led" "led" 91
-+ "ephy2_led" "led" 92
-+ "ephy3_led" "led" 93
-+ "ephy4_led" "led" 94
-+ "wled" "led" 85
-+ "par_nand" "flash" 37, 38, 39, 40, 41, 42,
-+ 43, 44, 45, 46, 47, 48,
-+ 49, 50
-+ "snfi" "flash" 8, 9, 10, 11, 12, 13
-+ "spi_nor" "flash" 8, 9, 10, 11, 12, 13
-+ "pcie0_0_waken" "pcie" 14
-+ "pcie0_1_waken" "pcie" 79
-+ "pcie1_0_waken" "pcie" 14
-+ "pcie0_0_clkreq" "pcie" 15
-+ "pcie0_1_clkreq" "pcie" 80
-+ "pcie1_0_clkreq" "pcie" 15
-+ "pcie0_pad_perst" "pcie" 83
-+ "pcie1_pad_perst" "pcie" 84
-+ "pmic_bus" "pmic" 71, 72
-+ "pwm_ch1_0" "pwm" 51
-+ "pwm_ch1_1" "pwm" 73
-+ "pwm_ch1_2" "pwm" 95
-+ "pwm_ch2_0" "pwm" 52
-+ "pwm_ch2_1" "pwm" 74
-+ "pwm_ch2_2" "pwm" 96
-+ "pwm_ch3_0" "pwm" 53
-+ "pwm_ch3_1" "pwm" 75
-+ "pwm_ch3_2" "pwm" 97
-+ "pwm_ch4_0" "pwm" 54
-+ "pwm_ch4_1" "pwm" 67
-+ "pwm_ch4_2" "pwm" 76
-+ "pwm_ch4_3" "pwm" 98
-+ "pwm_ch5_0" "pwm" 68
-+ "pwm_ch5_1" "pwm" 77
-+ "pwm_ch5_2" "pwm" 99
-+ "pwm_ch6_0" "pwm" 69
-+ "pwm_ch6_1" "pwm" 78
-+ "pwm_ch6_2" "pwm" 81
-+ "pwm_ch6_3" "pwm" 100
-+ "pwm_ch7_0" "pwm" 70
-+ "pwm_ch7_1" "pwm" 82
-+ "pwm_ch7_2" "pwm" 101
-+ "sd_0" "sd" 16, 17, 18, 19, 20, 21
-+ "sd_1" "sd" 25, 26, 27, 28, 29, 30
-+ "spic0_0" "spi" 63, 64, 65, 66
-+ "spic0_1" "spi" 79, 80, 81, 82
-+ "spic1_0" "spi" 67, 68, 69, 70
-+ "spic1_1" "spi" 73, 74, 75, 76
-+ "spic2_0_wp_hold" "spi" 8, 9
-+ "spic2_0" "spi" 10, 11, 12, 13
-+ "tdm_0_out_mclk_bclk_ws" "tdm" 8, 9, 10
-+ "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13
-+ "tdm_0_out_data" "tdm" 20
-+ "tdm_0_in_data" "tdm" 21
-+ "tdm_1_out_mclk_bclk_ws" "tdm" 57, 58, 59
-+ "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62
-+ "tdm_1_out_data" "tdm" 55
-+ "tdm_1_in_data" "tdm" 56
-+ "uart0_0_tx_rx" "uart" 6, 7
-+ "uart1_0_tx_rx" "uart" 55, 56
-+ "uart1_0_rts_cts" "uart" 57, 58
-+ "uart1_1_tx_rx" "uart" 73, 74
-+ "uart1_1_rts_cts" "uart" 75, 76
-+ "uart2_0_tx_rx" "uart" 3, 4
-+ "uart2_0_rts_cts" "uart" 1, 2
-+ "uart2_1_tx_rx" "uart" 51, 52
-+ "uart2_1_rts_cts" "uart" 53, 54
-+ "uart2_2_tx_rx" "uart" 59, 60
-+ "uart2_2_rts_cts" "uart" 61, 62
-+ "uart2_3_tx_rx" "uart" 95, 96
-+ "uart3_0_tx_rx" "uart" 57, 58
-+ "uart3_1_tx_rx" "uart" 81, 82
-+ "uart3_1_rts_cts" "uart" 79, 80
-+ "uart4_0_tx_rx" "uart" 61, 62
-+ "uart4_1_tx_rx" "uart" 91, 92
-+ "uart4_1_rts_cts" "uart" 93, 94
-+ "uart4_2_tx_rx" "uart" 97, 98
-+ "uart4_2_rts_cts" "uart" 95, 96
-+ "watchdog" "watchdog" 78
-+
-+Example:
-+
-+ pio: pinctrl@10211000 {
-+ compatible = "mediatek,mt7622-pinctrl";
-+ reg = <0 0x10211000 0 0x1000>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ pinctrl_eth_default: eth-default {
-+ mux-mdio {
-+ groups = "mdc_mdio";
-+ function = "eth";
-+ drive-strength = <12>;
-+ };
-+
-+ mux-gmac2 {
-+ groups = "gmac2";
-+ function = "eth";
-+ drive-strength = <12>;
-+ };
-+
-+ mux-esw {
-+ groups = "esw";
-+ function = "eth";
-+ drive-strength = <8>;
-+ };
-+
-+ conf-mdio {
-+ pins = "MDC";
-+ bias-pull-up;
-+ };
-+ };
-+ };
diff --git a/target/linux/mediatek/patches-4.14/0170-pinctrl-mediatek-cleanup-for-placing-all-drivers-und.patch b/target/linux/mediatek/patches-4.14/0170-pinctrl-mediatek-cleanup-for-placing-all-drivers-und.patch
deleted file mode 100644
index 780cc10868..0000000000
--- a/target/linux/mediatek/patches-4.14/0170-pinctrl-mediatek-cleanup-for-placing-all-drivers-und.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 547700768b2e7a105ed27a3b955fd9b7142987d7 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Tue, 12 Dec 2017 14:24:19 +0800
-Subject: [PATCH 170/224] pinctrl: mediatek: cleanup for placing all drivers
- under the menu
-
-Since lots of MediaTek drivers had been added, it seems slightly better
-for that adding cleanup for placing MediaTek pinctrl drivers under the
-independent menu as other kinds of drivers usually was done.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Biao Huang <biao.huang@mediatek.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/Kconfig | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -1,4 +1,5 @@
--if ARCH_MEDIATEK || COMPILE_TEST
-+menu "MediaTek pinctrl drivers"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-
- config PINCTRL_MTK
- bool
-@@ -46,4 +47,4 @@ config PINCTRL_MT6397
- default MFD_MT6397
- select PINCTRL_MTK
-
--endif
-+endmenu
diff --git a/target/linux/mediatek/patches-4.14/0171-pinctrl-mediatek-add-pinctrl-driver-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0171-pinctrl-mediatek-add-pinctrl-driver-for-MT7622-SoC.patch
deleted file mode 100644
index c3a09f2720..0000000000
--- a/target/linux/mediatek/patches-4.14/0171-pinctrl-mediatek-add-pinctrl-driver-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,1675 +0,0 @@
-From 4318e143fe3ac617de20cf72aa32fd9d3ad92ee6 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Tue, 12 Dec 2017 14:24:20 +0800
-Subject: [PATCH 171/224] pinctrl: mediatek: add pinctrl driver for MT7622 SoC
-
-Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has
-the registers for pinctrl, pinconf and gpio mixed up in the same register
-range. However, the IO core for the MT7622 SoC is completely distinct from
-anyone of previous MediaTek SoCs which already had support, such as
-the hardware internal, register address map and register detailed
-definition for each pin.
-
-Therefore, instead, the driver is being newly implemented by reusing
-generic methods provided from the core layer with GENERIC_PINCONF,
-GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code
-simplicity and rid of superfluous code. Where the function of pins
-determined by groups is utilized in this driver which can help developers
-less confused with what combinations of pins effective on the SoC and even
-reducing the mistakes during the integration of those relevant boards.
-
-As the gpio_chip handling is also only a few lines, the driver also
-implements the gpio functionality directly through GPIOLIB.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Biao Huang <biao.huang@mediatek.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/Makefile | 2 +-
- drivers/pinctrl/mediatek/Kconfig | 10 +
- drivers/pinctrl/mediatek/Makefile | 3 +-
- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 1595 +++++++++++++++++++++++++++++
- 4 files changed, 1608 insertions(+), 2 deletions(-)
- create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7622.c
-
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -64,5 +64,5 @@ obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/
- obj-y += ti/
- obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
- obj-$(CONFIG_ARCH_VT8500) += vt8500/
--obj-$(CONFIG_PINCTRL_MTK) += mediatek/
-+obj-y += mediatek/
- obj-$(CONFIG_PINCTRL_ZX) += zte/
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -32,6 +32,16 @@ config PINCTRL_MT8127
- select PINCTRL_MTK
-
- # For ARMv8 SoCs
-+config PINCTRL_MT7622
-+ bool "MediaTek MT7622 pin control"
-+ depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ select GENERIC_PINCONF
-+ select GENERIC_PINCTRL_GROUPS
-+ select GENERIC_PINMUX_FUNCTIONS
-+ select GPIOLIB
-+ select OF_GPIO
-+
- config PINCTRL_MT8173
- bool "Mediatek MT8173 pin control"
- depends on OF
---- a/drivers/pinctrl/mediatek/Makefile
-+++ b/drivers/pinctrl/mediatek/Makefile
-@@ -1,10 +1,11 @@
- # SPDX-License-Identifier: GPL-2.0
- # Core
--obj-y += pinctrl-mtk-common.o
-+obj-$(CONFIG_PINCTRL_MTK) += pinctrl-mtk-common.o
-
- # SoC Drivers
- obj-$(CONFIG_PINCTRL_MT2701) += pinctrl-mt2701.o
- obj-$(CONFIG_PINCTRL_MT8135) += pinctrl-mt8135.o
- obj-$(CONFIG_PINCTRL_MT8127) += pinctrl-mt8127.o
-+obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
- obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
- obj-$(CONFIG_PINCTRL_MT6397) += pinctrl-mt6397.o
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-@@ -0,0 +1,1595 @@
-+/*
-+ * MediaTek MT7622 Pinctrl Driver
-+ *
-+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/regmap.h>
-+
-+#include "../core.h"
-+#include "../pinconf.h"
-+#include "../pinmux.h"
-+
-+#define PINCTRL_PINCTRL_DEV KBUILD_MODNAME
-+#define MTK_RANGE(_a) { .range = (_a), .nranges = ARRAY_SIZE(_a), }
-+#define PINCTRL_PIN_GROUP(name, id) \
-+ { \
-+ name, \
-+ id##_pins, \
-+ ARRAY_SIZE(id##_pins), \
-+ id##_funcs, \
-+ }
-+
-+#define MTK_GPIO_MODE 1
-+#define MTK_INPUT 0
-+#define MTK_OUTPUT 1
-+#define MTK_DISABLE 0
-+#define MTK_ENABLE 1
-+
-+/* Custom pinconf parameters */
-+#define MTK_PIN_CONFIG_TDSEL (PIN_CONFIG_END + 1)
-+#define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
-+
-+/* List these attributes which could be modified for the pin */
-+enum {
-+ PINCTRL_PIN_REG_MODE,
-+ PINCTRL_PIN_REG_DIR,
-+ PINCTRL_PIN_REG_DI,
-+ PINCTRL_PIN_REG_DO,
-+ PINCTRL_PIN_REG_SR,
-+ PINCTRL_PIN_REG_SMT,
-+ PINCTRL_PIN_REG_PD,
-+ PINCTRL_PIN_REG_PU,
-+ PINCTRL_PIN_REG_E4,
-+ PINCTRL_PIN_REG_E8,
-+ PINCTRL_PIN_REG_TDSEL,
-+ PINCTRL_PIN_REG_RDSEL,
-+ PINCTRL_PIN_REG_MAX,
-+};
-+
-+/* struct mtk_pin_field - the structure that holds the information of the field
-+ * used to describe the attribute for the pin
-+ * @offset: the register offset relative to the base address
-+ * @mask: the mask used to filter out the field from the register
-+ * @bitpos: the start bit relative to the register
-+ * @next: the indication that the field would be extended to the
-+ next register
-+ */
-+struct mtk_pin_field {
-+ u32 offset;
-+ u32 mask;
-+ u8 bitpos;
-+ u8 next;
-+};
-+
-+/* struct mtk_pin_field_calc - the structure that holds the range providing
-+ * the guide used to look up the relevant field
-+ * @s_pin: the start pin within the range
-+ * @e_pin: the end pin within the range
-+ * @s_addr: the start address for the range
-+ * @x_addrs: the address distance between two consecutive registers
-+ * within the range
-+ * @s_bit: the start bit for the first register within the range
-+ * @x_bits: the bit distance between two consecutive pins within
-+ * the range
-+ */
-+struct mtk_pin_field_calc {
-+ u16 s_pin;
-+ u16 e_pin;
-+ u32 s_addr;
-+ u8 x_addrs;
-+ u8 s_bit;
-+ u8 x_bits;
-+};
-+
-+/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
-+ * determine which register the pin would make use of
-+ * for certain pin attribute.
-+ * @range: the start address for the range
-+ * @nranges: the number of items in the range
-+ */
-+struct mtk_pin_reg_calc {
-+ const struct mtk_pin_field_calc *range;
-+ unsigned int nranges;
-+};
-+
-+/* struct mtk_pin_soc - the structure that holds SoC-specific data */
-+struct mtk_pin_soc {
-+ const struct mtk_pin_reg_calc *reg_cal;
-+ const struct pinctrl_pin_desc *pins;
-+ unsigned int npins;
-+ const struct group_desc *grps;
-+ unsigned int ngrps;
-+ const struct function_desc *funcs;
-+ unsigned int nfuncs;
-+};
-+
-+struct mtk_pinctrl {
-+ struct pinctrl_dev *pctrl;
-+ void __iomem *base;
-+ struct device *dev;
-+ struct gpio_chip chip;
-+ const struct mtk_pin_soc *soc;
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_mode_range[] = {
-+ {0, 0, 0x320, 0x10, 16, 4},
-+ {1, 4, 0x3a0, 0x10, 16, 4},
-+ {5, 5, 0x320, 0x10, 0, 4},
-+ {6, 6, 0x300, 0x10, 4, 4},
-+ {7, 7, 0x300, 0x10, 4, 4},
-+ {8, 9, 0x350, 0x10, 20, 4},
-+ {10, 10, 0x300, 0x10, 8, 4},
-+ {11, 11, 0x300, 0x10, 8, 4},
-+ {12, 12, 0x300, 0x10, 8, 4},
-+ {13, 13, 0x300, 0x10, 8, 4},
-+ {14, 15, 0x320, 0x10, 4, 4},
-+ {16, 17, 0x320, 0x10, 20, 4},
-+ {18, 21, 0x310, 0x10, 16, 4},
-+ {22, 22, 0x380, 0x10, 16, 4},
-+ {23, 23, 0x300, 0x10, 24, 4},
-+ {24, 24, 0x300, 0x10, 24, 4},
-+ {25, 25, 0x300, 0x10, 12, 4},
-+ {25, 25, 0x300, 0x10, 12, 4},
-+ {26, 26, 0x300, 0x10, 12, 4},
-+ {27, 27, 0x300, 0x10, 12, 4},
-+ {28, 28, 0x300, 0x10, 12, 4},
-+ {29, 29, 0x300, 0x10, 12, 4},
-+ {30, 30, 0x300, 0x10, 12, 4},
-+ {31, 31, 0x300, 0x10, 12, 4},
-+ {32, 32, 0x300, 0x10, 12, 4},
-+ {33, 33, 0x300, 0x10, 12, 4},
-+ {34, 34, 0x300, 0x10, 12, 4},
-+ {35, 35, 0x300, 0x10, 12, 4},
-+ {36, 36, 0x300, 0x10, 12, 4},
-+ {37, 37, 0x300, 0x10, 20, 4},
-+ {38, 38, 0x300, 0x10, 20, 4},
-+ {39, 39, 0x300, 0x10, 20, 4},
-+ {40, 40, 0x300, 0x10, 20, 4},
-+ {41, 41, 0x300, 0x10, 20, 4},
-+ {42, 42, 0x300, 0x10, 20, 4},
-+ {43, 43, 0x300, 0x10, 20, 4},
-+ {44, 44, 0x300, 0x10, 20, 4},
-+ {45, 46, 0x300, 0x10, 20, 4},
-+ {47, 47, 0x300, 0x10, 20, 4},
-+ {48, 48, 0x300, 0x10, 20, 4},
-+ {49, 49, 0x300, 0x10, 20, 4},
-+ {50, 50, 0x300, 0x10, 20, 4},
-+ {51, 70, 0x330, 0x10, 4, 4},
-+ {71, 71, 0x300, 0x10, 16, 4},
-+ {72, 72, 0x300, 0x10, 16, 4},
-+ {73, 76, 0x310, 0x10, 0, 4},
-+ {77, 77, 0x320, 0x10, 28, 4},
-+ {78, 78, 0x320, 0x10, 12, 4},
-+ {79, 82, 0x3a0, 0x10, 0, 4},
-+ {83, 83, 0x350, 0x10, 28, 4},
-+ {84, 84, 0x330, 0x10, 0, 4},
-+ {85, 90, 0x360, 0x10, 4, 4},
-+ {91, 94, 0x390, 0x10, 16, 4},
-+ {95, 97, 0x380, 0x10, 20, 4},
-+ {98, 101, 0x390, 0x10, 0, 4},
-+ {102, 102, 0x360, 0x10, 0, 4},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_dir_range[] = {
-+ {0, 102, 0x0, 0x10, 0, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_di_range[] = {
-+ {0, 102, 0x200, 0x10, 0, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_do_range[] = {
-+ {0, 102, 0x100, 0x10, 0, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_sr_range[] = {
-+ {0, 31, 0x910, 0x10, 0, 1},
-+ {32, 50, 0xa10, 0x10, 0, 1},
-+ {51, 70, 0x810, 0x10, 0, 1},
-+ {71, 72, 0xb10, 0x10, 0, 1},
-+ {73, 86, 0xb10, 0x10, 4, 1},
-+ {87, 90, 0xc10, 0x10, 0, 1},
-+ {91, 102, 0xb10, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_smt_range[] = {
-+ {0, 31, 0x920, 0x10, 0, 1},
-+ {32, 50, 0xa20, 0x10, 0, 1},
-+ {51, 70, 0x820, 0x10, 0, 1},
-+ {71, 72, 0xb20, 0x10, 0, 1},
-+ {73, 86, 0xb20, 0x10, 4, 1},
-+ {87, 90, 0xc20, 0x10, 0, 1},
-+ {91, 102, 0xb20, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_pu_range[] = {
-+ {0, 31, 0x930, 0x10, 0, 1},
-+ {32, 50, 0xa30, 0x10, 0, 1},
-+ {51, 70, 0x830, 0x10, 0, 1},
-+ {71, 72, 0xb30, 0x10, 0, 1},
-+ {73, 86, 0xb30, 0x10, 4, 1},
-+ {87, 90, 0xc30, 0x10, 0, 1},
-+ {91, 102, 0xb30, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_pd_range[] = {
-+ {0, 31, 0x940, 0x10, 0, 1},
-+ {32, 50, 0xa40, 0x10, 0, 1},
-+ {51, 70, 0x840, 0x10, 0, 1},
-+ {71, 72, 0xb40, 0x10, 0, 1},
-+ {73, 86, 0xb40, 0x10, 4, 1},
-+ {87, 90, 0xc40, 0x10, 0, 1},
-+ {91, 102, 0xb40, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_e4_range[] = {
-+ {0, 31, 0x960, 0x10, 0, 1},
-+ {32, 50, 0xa60, 0x10, 0, 1},
-+ {51, 70, 0x860, 0x10, 0, 1},
-+ {71, 72, 0xb60, 0x10, 0, 1},
-+ {73, 86, 0xb60, 0x10, 4, 1},
-+ {87, 90, 0xc60, 0x10, 0, 1},
-+ {91, 102, 0xb60, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_e8_range[] = {
-+ {0, 31, 0x970, 0x10, 0, 1},
-+ {32, 50, 0xa70, 0x10, 0, 1},
-+ {51, 70, 0x870, 0x10, 0, 1},
-+ {71, 72, 0xb70, 0x10, 0, 1},
-+ {73, 86, 0xb70, 0x10, 4, 1},
-+ {87, 90, 0xc70, 0x10, 0, 1},
-+ {91, 102, 0xb70, 0x10, 18, 1},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_tdsel_range[] = {
-+ {0, 31, 0x980, 0x4, 0, 4},
-+ {32, 50, 0xa80, 0x4, 0, 4},
-+ {51, 70, 0x880, 0x4, 0, 4},
-+ {71, 72, 0xb80, 0x4, 0, 4},
-+ {73, 86, 0xb80, 0x4, 16, 4},
-+ {87, 90, 0xc80, 0x4, 0, 4},
-+ {91, 102, 0xb88, 0x4, 8, 4},
-+};
-+
-+static const struct mtk_pin_field_calc mt7622_pin_rdsel_range[] = {
-+ {0, 31, 0x990, 0x4, 0, 6},
-+ {32, 50, 0xa90, 0x4, 0, 6},
-+ {51, 58, 0x890, 0x4, 0, 6},
-+ {59, 60, 0x894, 0x4, 28, 6},
-+ {61, 62, 0x894, 0x4, 16, 6},
-+ {63, 66, 0x898, 0x4, 8, 6},
-+ {67, 68, 0x89c, 0x4, 12, 6},
-+ {69, 70, 0x89c, 0x4, 0, 6},
-+ {71, 72, 0xb90, 0x4, 0, 6},
-+ {73, 86, 0xb90, 0x4, 24, 6},
-+ {87, 90, 0xc90, 0x4, 0, 6},
-+ {91, 102, 0xb9c, 0x4, 12, 6},
-+};
-+
-+static const struct mtk_pin_reg_calc mt7622_reg_cals[PINCTRL_PIN_REG_MAX] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7622_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7622_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7622_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7622_pin_do_range),
-+ [PINCTRL_PIN_REG_SR] = MTK_RANGE(mt7622_pin_sr_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7622_pin_smt_range),
-+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7622_pin_pu_range),
-+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7622_pin_pd_range),
-+ [PINCTRL_PIN_REG_E4] = MTK_RANGE(mt7622_pin_e4_range),
-+ [PINCTRL_PIN_REG_E8] = MTK_RANGE(mt7622_pin_e8_range),
-+ [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt7622_pin_tdsel_range),
-+ [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt7622_pin_rdsel_range),
-+};
-+
-+static const struct pinctrl_pin_desc mt7622_pins[] = {
-+ PINCTRL_PIN(0, "GPIO_A"),
-+ PINCTRL_PIN(1, "I2S1_IN"),
-+ PINCTRL_PIN(2, "I2S1_OUT"),
-+ PINCTRL_PIN(3, "I2S_BCLK"),
-+ PINCTRL_PIN(4, "I2S_WS"),
-+ PINCTRL_PIN(5, "I2S_MCLK"),
-+ PINCTRL_PIN(6, "TXD0"),
-+ PINCTRL_PIN(7, "RXD0"),
-+ PINCTRL_PIN(8, "SPI_WP"),
-+ PINCTRL_PIN(9, "SPI_HOLD"),
-+ PINCTRL_PIN(10, "SPI_CLK"),
-+ PINCTRL_PIN(11, "SPI_MOSI"),
-+ PINCTRL_PIN(12, "SPI_MISO"),
-+ PINCTRL_PIN(13, "SPI_CS"),
-+ PINCTRL_PIN(14, "I2C_SDA"),
-+ PINCTRL_PIN(15, "I2C_SCL"),
-+ PINCTRL_PIN(16, "I2S2_IN"),
-+ PINCTRL_PIN(17, "I2S3_IN"),
-+ PINCTRL_PIN(18, "I2S4_IN"),
-+ PINCTRL_PIN(19, "I2S2_OUT"),
-+ PINCTRL_PIN(20, "I2S3_OUT"),
-+ PINCTRL_PIN(21, "I2S4_OUT"),
-+ PINCTRL_PIN(22, "GPIO_B"),
-+ PINCTRL_PIN(23, "MDC"),
-+ PINCTRL_PIN(24, "MDIO"),
-+ PINCTRL_PIN(25, "G2_TXD0"),
-+ PINCTRL_PIN(26, "G2_TXD1"),
-+ PINCTRL_PIN(27, "G2_TXD2"),
-+ PINCTRL_PIN(28, "G2_TXD3"),
-+ PINCTRL_PIN(29, "G2_TXEN"),
-+ PINCTRL_PIN(30, "G2_TXC"),
-+ PINCTRL_PIN(31, "G2_RXD0"),
-+ PINCTRL_PIN(32, "G2_RXD1"),
-+ PINCTRL_PIN(33, "G2_RXD2"),
-+ PINCTRL_PIN(34, "G2_RXD3"),
-+ PINCTRL_PIN(35, "G2_RXDV"),
-+ PINCTRL_PIN(36, "G2_RXC"),
-+ PINCTRL_PIN(37, "NCEB"),
-+ PINCTRL_PIN(38, "NWEB"),
-+ PINCTRL_PIN(39, "NREB"),
-+ PINCTRL_PIN(40, "NDL4"),
-+ PINCTRL_PIN(41, "NDL5"),
-+ PINCTRL_PIN(42, "NDL6"),
-+ PINCTRL_PIN(43, "NDL7"),
-+ PINCTRL_PIN(44, "NRB"),
-+ PINCTRL_PIN(45, "NCLE"),
-+ PINCTRL_PIN(46, "NALE"),
-+ PINCTRL_PIN(47, "NDL0"),
-+ PINCTRL_PIN(48, "NDL1"),
-+ PINCTRL_PIN(49, "NDL2"),
-+ PINCTRL_PIN(50, "NDL3"),
-+ PINCTRL_PIN(51, "MDI_TP_P0"),
-+ PINCTRL_PIN(52, "MDI_TN_P0"),
-+ PINCTRL_PIN(53, "MDI_RP_P0"),
-+ PINCTRL_PIN(54, "MDI_RN_P0"),
-+ PINCTRL_PIN(55, "MDI_TP_P1"),
-+ PINCTRL_PIN(56, "MDI_TN_P1"),
-+ PINCTRL_PIN(57, "MDI_RP_P1"),
-+ PINCTRL_PIN(58, "MDI_RN_P1"),
-+ PINCTRL_PIN(59, "MDI_RP_P2"),
-+ PINCTRL_PIN(60, "MDI_RN_P2"),
-+ PINCTRL_PIN(61, "MDI_TP_P2"),
-+ PINCTRL_PIN(62, "MDI_TN_P2"),
-+ PINCTRL_PIN(63, "MDI_TP_P3"),
-+ PINCTRL_PIN(64, "MDI_TN_P3"),
-+ PINCTRL_PIN(65, "MDI_RP_P3"),
-+ PINCTRL_PIN(66, "MDI_RN_P3"),
-+ PINCTRL_PIN(67, "MDI_RP_P4"),
-+ PINCTRL_PIN(68, "MDI_RN_P4"),
-+ PINCTRL_PIN(69, "MDI_TP_P4"),
-+ PINCTRL_PIN(70, "MDI_TN_P4"),
-+ PINCTRL_PIN(71, "PMIC_SCL"),
-+ PINCTRL_PIN(72, "PMIC_SDA"),
-+ PINCTRL_PIN(73, "SPIC1_CLK"),
-+ PINCTRL_PIN(74, "SPIC1_MOSI"),
-+ PINCTRL_PIN(75, "SPIC1_MISO"),
-+ PINCTRL_PIN(76, "SPIC1_CS"),
-+ PINCTRL_PIN(77, "GPIO_D"),
-+ PINCTRL_PIN(78, "WATCHDOG"),
-+ PINCTRL_PIN(79, "RTS3_N"),
-+ PINCTRL_PIN(80, "CTS3_N"),
-+ PINCTRL_PIN(81, "TXD3"),
-+ PINCTRL_PIN(82, "RXD3"),
-+ PINCTRL_PIN(83, "PERST0_N"),
-+ PINCTRL_PIN(84, "PERST1_N"),
-+ PINCTRL_PIN(85, "WLED_N"),
-+ PINCTRL_PIN(86, "EPHY_LED0_N"),
-+ PINCTRL_PIN(87, "AUXIN0"),
-+ PINCTRL_PIN(88, "AUXIN1"),
-+ PINCTRL_PIN(89, "AUXIN2"),
-+ PINCTRL_PIN(90, "AUXIN3"),
-+ PINCTRL_PIN(91, "TXD4"),
-+ PINCTRL_PIN(92, "RXD4"),
-+ PINCTRL_PIN(93, "RTS4_N"),
-+ PINCTRL_PIN(94, "CTS4_N"),
-+ PINCTRL_PIN(95, "PWM1"),
-+ PINCTRL_PIN(96, "PWM2"),
-+ PINCTRL_PIN(97, "PWM3"),
-+ PINCTRL_PIN(98, "PWM4"),
-+ PINCTRL_PIN(99, "PWM5"),
-+ PINCTRL_PIN(100, "PWM6"),
-+ PINCTRL_PIN(101, "PWM7"),
-+ PINCTRL_PIN(102, "GPIO_E"),
-+};
-+
-+/* List all groups consisting of these pins dedicated to the enablement of
-+ * certain hardware block and the corresponding mode for all of the pins. The
-+ * hardware probably has multiple combinations of these pinouts.
-+ */
-+
-+/* EMMC */
-+static int mt7622_emmc_pins[] = { 40, 41, 42, 43, 44, 45, 47, 48, 49, 50, };
-+static int mt7622_emmc_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
-+
-+static int mt7622_emmc_rst_pins[] = { 37, };
-+static int mt7622_emmc_rst_funcs[] = { 1, };
-+
-+/* LED for EPHY */
-+static int mt7622_ephy_leds_pins[] = { 86, 91, 92, 93, 94, };
-+static int mt7622_ephy_leds_funcs[] = { 0, 0, 0, 0, 0, };
-+static int mt7622_ephy0_led_pins[] = { 86, };
-+static int mt7622_ephy0_led_funcs[] = { 0, };
-+static int mt7622_ephy1_led_pins[] = { 91, };
-+static int mt7622_ephy1_led_funcs[] = { 2, };
-+static int mt7622_ephy2_led_pins[] = { 92, };
-+static int mt7622_ephy2_led_funcs[] = { 2, };
-+static int mt7622_ephy3_led_pins[] = { 93, };
-+static int mt7622_ephy3_led_funcs[] = { 2, };
-+static int mt7622_ephy4_led_pins[] = { 94, };
-+static int mt7622_ephy4_led_funcs[] = { 2, };
-+
-+/* Embedded Switch */
-+static int mt7622_esw_pins[] = { 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61,
-+ 62, 63, 64, 65, 66, 67, 68, 69, 70, };
-+static int mt7622_esw_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, };
-+static int mt7622_esw_p0_p1_pins[] = { 51, 52, 53, 54, 55, 56, 57, 58, };
-+static int mt7622_esw_p0_p1_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
-+static int mt7622_esw_p2_p3_p4_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66, 67,
-+ 68, 69, 70, };
-+static int mt7622_esw_p2_p3_p4_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, };
-+/* RGMII via ESW */
-+static int mt7622_rgmii_via_esw_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66,
-+ 67, 68, 69, 70, };
-+static int mt7622_rgmii_via_esw_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, };
-+
-+/* RGMII via GMAC1 */
-+static int mt7622_rgmii_via_gmac1_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66,
-+ 67, 68, 69, 70, };
-+static int mt7622_rgmii_via_gmac1_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, };
-+
-+/* RGMII via GMAC2 */
-+static int mt7622_rgmii_via_gmac2_pins[] = { 25, 26, 27, 28, 29, 30, 31, 32,
-+ 33, 34, 35, 36, };
-+static int mt7622_rgmii_via_gmac2_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, };
-+
-+/* I2C */
-+static int mt7622_i2c0_pins[] = { 14, 15, };
-+static int mt7622_i2c0_funcs[] = { 0, 0, };
-+static int mt7622_i2c1_0_pins[] = { 55, 56, };
-+static int mt7622_i2c1_0_funcs[] = { 0, 0, };
-+static int mt7622_i2c1_1_pins[] = { 73, 74, };
-+static int mt7622_i2c1_1_funcs[] = { 3, 3, };
-+static int mt7622_i2c1_2_pins[] = { 87, 88, };
-+static int mt7622_i2c1_2_funcs[] = { 0, 0, };
-+static int mt7622_i2c2_0_pins[] = { 57, 58, };
-+static int mt7622_i2c2_0_funcs[] = { 0, 0, };
-+static int mt7622_i2c2_1_pins[] = { 75, 76, };
-+static int mt7622_i2c2_1_funcs[] = { 3, 3, };
-+static int mt7622_i2c2_2_pins[] = { 89, 90, };
-+static int mt7622_i2c2_2_funcs[] = { 0, 0, };
-+
-+/* I2S */
-+static int mt7622_i2s_in_mclk_bclk_ws_pins[] = { 3, 4, 5, };
-+static int mt7622_i2s_in_mclk_bclk_ws_funcs[] = { 3, 3, 0, };
-+static int mt7622_i2s1_in_data_pins[] = { 1, };
-+static int mt7622_i2s1_in_data_funcs[] = { 0, };
-+static int mt7622_i2s2_in_data_pins[] = { 16, };
-+static int mt7622_i2s2_in_data_funcs[] = { 0, };
-+static int mt7622_i2s3_in_data_pins[] = { 17, };
-+static int mt7622_i2s3_in_data_funcs[] = { 0, };
-+static int mt7622_i2s4_in_data_pins[] = { 18, };
-+static int mt7622_i2s4_in_data_funcs[] = { 0, };
-+static int mt7622_i2s_out_mclk_bclk_ws_pins[] = { 3, 4, 5, };
-+static int mt7622_i2s_out_mclk_bclk_ws_funcs[] = { 0, 0, 0, };
-+static int mt7622_i2s1_out_data_pins[] = { 2, };
-+static int mt7622_i2s1_out_data_funcs[] = { 0, };
-+static int mt7622_i2s2_out_data_pins[] = { 19, };
-+static int mt7622_i2s2_out_data_funcs[] = { 0, };
-+static int mt7622_i2s3_out_data_pins[] = { 20, };
-+static int mt7622_i2s3_out_data_funcs[] = { 0, };
-+static int mt7622_i2s4_out_data_pins[] = { 21, };
-+static int mt7622_i2s4_out_data_funcs[] = { 0, };
-+
-+/* IR */
-+static int mt7622_ir_0_tx_pins[] = { 16, };
-+static int mt7622_ir_0_tx_funcs[] = { 4, };
-+static int mt7622_ir_1_tx_pins[] = { 59, };
-+static int mt7622_ir_1_tx_funcs[] = { 5, };
-+static int mt7622_ir_2_tx_pins[] = { 99, };
-+static int mt7622_ir_2_tx_funcs[] = { 3, };
-+static int mt7622_ir_0_rx_pins[] = { 17, };
-+static int mt7622_ir_0_rx_funcs[] = { 4, };
-+static int mt7622_ir_1_rx_pins[] = { 60, };
-+static int mt7622_ir_1_rx_funcs[] = { 5, };
-+static int mt7622_ir_2_rx_pins[] = { 100, };
-+static int mt7622_ir_2_rx_funcs[] = { 3, };
-+
-+/* MDIO */
-+static int mt7622_mdc_mdio_pins[] = { 23, 24, };
-+static int mt7622_mdc_mdio_funcs[] = { 0, 0, };
-+
-+/* PCIE */
-+static int mt7622_pcie0_0_waken_pins[] = { 14, };
-+static int mt7622_pcie0_0_waken_funcs[] = { 2, };
-+static int mt7622_pcie0_0_clkreq_pins[] = { 15, };
-+static int mt7622_pcie0_0_clkreq_funcs[] = { 2, };
-+static int mt7622_pcie0_1_waken_pins[] = { 79, };
-+static int mt7622_pcie0_1_waken_funcs[] = { 4, };
-+static int mt7622_pcie0_1_clkreq_pins[] = { 80, };
-+static int mt7622_pcie0_1_clkreq_funcs[] = { 4, };
-+static int mt7622_pcie1_0_waken_pins[] = { 14, };
-+static int mt7622_pcie1_0_waken_funcs[] = { 3, };
-+static int mt7622_pcie1_0_clkreq_pins[] = { 15, };
-+static int mt7622_pcie1_0_clkreq_funcs[] = { 3, };
-+
-+static int mt7622_pcie0_pad_perst_pins[] = { 83, };
-+static int mt7622_pcie0_pad_perst_funcs[] = { 0, };
-+static int mt7622_pcie1_pad_perst_pins[] = { 84, };
-+static int mt7622_pcie1_pad_perst_funcs[] = { 0, };
-+
-+/* PMIC bus */
-+static int mt7622_pmic_bus_pins[] = { 71, 72, };
-+static int mt7622_pmic_bus_funcs[] = { 0, 0, };
-+
-+/* Parallel NAND */
-+static int mt7622_pnand_pins[] = { 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, };
-+static int mt7622_pnand_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, };
-+
-+/* PWM */
-+static int mt7622_pwm_ch1_0_pins[] = { 51, };
-+static int mt7622_pwm_ch1_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch1_1_pins[] = { 73, };
-+static int mt7622_pwm_ch1_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch1_2_pins[] = { 95, };
-+static int mt7622_pwm_ch1_2_funcs[] = { 0, };
-+static int mt7622_pwm_ch2_0_pins[] = { 52, };
-+static int mt7622_pwm_ch2_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch2_1_pins[] = { 74, };
-+static int mt7622_pwm_ch2_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch2_2_pins[] = { 96, };
-+static int mt7622_pwm_ch2_2_funcs[] = { 0, };
-+static int mt7622_pwm_ch3_0_pins[] = { 53, };
-+static int mt7622_pwm_ch3_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch3_1_pins[] = { 75, };
-+static int mt7622_pwm_ch3_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch3_2_pins[] = { 97, };
-+static int mt7622_pwm_ch3_2_funcs[] = { 0, };
-+static int mt7622_pwm_ch4_0_pins[] = { 54, };
-+static int mt7622_pwm_ch4_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch4_1_pins[] = { 67, };
-+static int mt7622_pwm_ch4_1_funcs[] = { 3, };
-+static int mt7622_pwm_ch4_2_pins[] = { 76, };
-+static int mt7622_pwm_ch4_2_funcs[] = { 4, };
-+static int mt7622_pwm_ch4_3_pins[] = { 98, };
-+static int mt7622_pwm_ch4_3_funcs[] = { 0, };
-+static int mt7622_pwm_ch5_0_pins[] = { 68, };
-+static int mt7622_pwm_ch5_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch5_1_pins[] = { 77, };
-+static int mt7622_pwm_ch5_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch5_2_pins[] = { 99, };
-+static int mt7622_pwm_ch5_2_funcs[] = { 0, };
-+static int mt7622_pwm_ch6_0_pins[] = { 69, };
-+static int mt7622_pwm_ch6_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch6_1_pins[] = { 78, };
-+static int mt7622_pwm_ch6_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch6_2_pins[] = { 81, };
-+static int mt7622_pwm_ch6_2_funcs[] = { 4, };
-+static int mt7622_pwm_ch6_3_pins[] = { 100, };
-+static int mt7622_pwm_ch6_3_funcs[] = { 0, };
-+static int mt7622_pwm_ch7_0_pins[] = { 70, };
-+static int mt7622_pwm_ch7_0_funcs[] = { 3, };
-+static int mt7622_pwm_ch7_1_pins[] = { 82, };
-+static int mt7622_pwm_ch7_1_funcs[] = { 4, };
-+static int mt7622_pwm_ch7_2_pins[] = { 101, };
-+static int mt7622_pwm_ch7_2_funcs[] = { 0, };
-+
-+/* SD */
-+static int mt7622_sd_0_pins[] = { 16, 17, 18, 19, 20, 21, };
-+static int mt7622_sd_0_funcs[] = { 2, 2, 2, 2, 2, 2, };
-+static int mt7622_sd_1_pins[] = { 25, 26, 27, 28, 29, 30, };
-+static int mt7622_sd_1_funcs[] = { 2, 2, 2, 2, 2, 2, };
-+
-+/* Serial NAND */
-+static int mt7622_snfi_pins[] = { 8, 9, 10, 11, 12, 13, };
-+static int mt7622_snfi_funcs[] = { 2, 2, 2, 2, 2, 2, };
-+
-+/* SPI NOR */
-+static int mt7622_spi_pins[] = { 8, 9, 10, 11, 12, 13 };
-+static int mt7622_spi_funcs[] = { 0, 0, 0, 0, 0, 0, };
-+
-+/* SPIC */
-+static int mt7622_spic0_0_pins[] = { 63, 64, 65, 66, };
-+static int mt7622_spic0_0_funcs[] = { 4, 4, 4, 4, };
-+static int mt7622_spic0_1_pins[] = { 79, 80, 81, 82, };
-+static int mt7622_spic0_1_funcs[] = { 3, 3, 3, 3, };
-+static int mt7622_spic1_0_pins[] = { 67, 68, 69, 70, };
-+static int mt7622_spic1_0_funcs[] = { 4, 4, 4, 4, };
-+static int mt7622_spic1_1_pins[] = { 73, 74, 75, 76, };
-+static int mt7622_spic1_1_funcs[] = { 0, 0, 0, 0, };
-+static int mt7622_spic2_0_pins[] = { 10, 11, 12, 13, };
-+static int mt7622_spic2_0_funcs[] = { 0, 0, 0, 0, };
-+static int mt7622_spic2_0_wp_hold_pins[] = { 8, 9, };
-+static int mt7622_spic2_0_wp_hold_funcs[] = { 0, 0, };
-+
-+/* TDM */
-+static int mt7622_tdm_0_out_mclk_bclk_ws_pins[] = { 8, 9, 10, };
-+static int mt7622_tdm_0_out_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
-+static int mt7622_tdm_0_in_mclk_bclk_ws_pins[] = { 11, 12, 13, };
-+static int mt7622_tdm_0_in_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
-+static int mt7622_tdm_0_out_data_pins[] = { 20, };
-+static int mt7622_tdm_0_out_data_funcs[] = { 3, };
-+static int mt7622_tdm_0_in_data_pins[] = { 21, };
-+static int mt7622_tdm_0_in_data_funcs[] = { 3, };
-+static int mt7622_tdm_1_out_mclk_bclk_ws_pins[] = { 57, 58, 59, };
-+static int mt7622_tdm_1_out_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
-+static int mt7622_tdm_1_in_mclk_bclk_ws_pins[] = { 60, 61, 62, };
-+static int mt7622_tdm_1_in_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
-+static int mt7622_tdm_1_out_data_pins[] = { 55, };
-+static int mt7622_tdm_1_out_data_funcs[] = { 3, };
-+static int mt7622_tdm_1_in_data_pins[] = { 56, };
-+static int mt7622_tdm_1_in_data_funcs[] = { 3, };
-+
-+/* UART */
-+static int mt7622_uart0_0_tx_rx_pins[] = { 6, 7, };
-+static int mt7622_uart0_0_tx_rx_funcs[] = { 0, 0, };
-+static int mt7622_uart1_0_tx_rx_pins[] = { 55, 56, };
-+static int mt7622_uart1_0_tx_rx_funcs[] = { 2, 2, };
-+static int mt7622_uart1_0_rts_cts_pins[] = { 57, 58, };
-+static int mt7622_uart1_0_rts_cts_funcs[] = { 2, 2, };
-+static int mt7622_uart1_1_tx_rx_pins[] = { 73, 74, };
-+static int mt7622_uart1_1_tx_rx_funcs[] = { 2, 2, };
-+static int mt7622_uart1_1_rts_cts_pins[] = { 75, 76, };
-+static int mt7622_uart1_1_rts_cts_funcs[] = { 2, 2, };
-+static int mt7622_uart2_0_tx_rx_pins[] = { 3, 4, };
-+static int mt7622_uart2_0_tx_rx_funcs[] = { 2, 2, };
-+static int mt7622_uart2_0_rts_cts_pins[] = { 1, 2, };
-+static int mt7622_uart2_0_rts_cts_funcs[] = { 2, 2, };
-+static int mt7622_uart2_1_tx_rx_pins[] = { 51, 52, };
-+static int mt7622_uart2_1_tx_rx_funcs[] = { 0, 0, };
-+static int mt7622_uart2_1_rts_cts_pins[] = { 53, 54, };
-+static int mt7622_uart2_1_rts_cts_funcs[] = { 0, 0, };
-+static int mt7622_uart2_2_tx_rx_pins[] = { 59, 60, };
-+static int mt7622_uart2_2_tx_rx_funcs[] = { 4, 4, };
-+static int mt7622_uart2_2_rts_cts_pins[] = { 61, 62, };
-+static int mt7622_uart2_2_rts_cts_funcs[] = { 4, 4, };
-+static int mt7622_uart2_3_tx_rx_pins[] = { 95, 96, };
-+static int mt7622_uart2_3_tx_rx_funcs[] = { 3, 3, };
-+static int mt7622_uart3_0_tx_rx_pins[] = { 57, 58, };
-+static int mt7622_uart3_0_tx_rx_funcs[] = { 5, 5, };
-+static int mt7622_uart3_1_tx_rx_pins[] = { 81, 82, };
-+static int mt7622_uart3_1_tx_rx_funcs[] = { 0, 0, };
-+static int mt7622_uart3_1_rts_cts_pins[] = { 79, 80, };
-+static int mt7622_uart3_1_rts_cts_funcs[] = { 0, 0, };
-+static int mt7622_uart4_0_tx_rx_pins[] = { 61, 62, };
-+static int mt7622_uart4_0_tx_rx_funcs[] = { 5, 5, };
-+static int mt7622_uart4_1_tx_rx_pins[] = { 91, 92, };
-+static int mt7622_uart4_1_tx_rx_funcs[] = { 0, 0, };
-+static int mt7622_uart4_1_rts_cts_pins[] = { 93, 94 };
-+static int mt7622_uart4_1_rts_cts_funcs[] = { 0, 0, };
-+static int mt7622_uart4_2_tx_rx_pins[] = { 97, 98, };
-+static int mt7622_uart4_2_tx_rx_funcs[] = { 2, 2, };
-+static int mt7622_uart4_2_rts_cts_pins[] = { 95, 96 };
-+static int mt7622_uart4_2_rts_cts_funcs[] = { 2, 2, };
-+
-+/* Watchdog */
-+static int mt7622_watchdog_pins[] = { 78, };
-+static int mt7622_watchdog_funcs[] = { 0, };
-+
-+/* WLAN LED */
-+static int mt7622_wled_pins[] = { 85, };
-+static int mt7622_wled_funcs[] = { 0, };
-+
-+static const struct group_desc mt7622_groups[] = {
-+ PINCTRL_PIN_GROUP("emmc", mt7622_emmc),
-+ PINCTRL_PIN_GROUP("emmc_rst", mt7622_emmc_rst),
-+ PINCTRL_PIN_GROUP("ephy_leds", mt7622_ephy_leds),
-+ PINCTRL_PIN_GROUP("ephy0_led", mt7622_ephy0_led),
-+ PINCTRL_PIN_GROUP("ephy1_led", mt7622_ephy1_led),
-+ PINCTRL_PIN_GROUP("ephy2_led", mt7622_ephy2_led),
-+ PINCTRL_PIN_GROUP("ephy3_led", mt7622_ephy3_led),
-+ PINCTRL_PIN_GROUP("ephy4_led", mt7622_ephy4_led),
-+ PINCTRL_PIN_GROUP("esw", mt7622_esw),
-+ PINCTRL_PIN_GROUP("esw_p0_p1", mt7622_esw_p0_p1),
-+ PINCTRL_PIN_GROUP("esw_p2_p3_p4", mt7622_esw_p2_p3_p4),
-+ PINCTRL_PIN_GROUP("rgmii_via_esw", mt7622_rgmii_via_esw),
-+ PINCTRL_PIN_GROUP("rgmii_via_gmac1", mt7622_rgmii_via_gmac1),
-+ PINCTRL_PIN_GROUP("rgmii_via_gmac2", mt7622_rgmii_via_gmac2),
-+ PINCTRL_PIN_GROUP("i2c0", mt7622_i2c0),
-+ PINCTRL_PIN_GROUP("i2c1_0", mt7622_i2c1_0),
-+ PINCTRL_PIN_GROUP("i2c1_1", mt7622_i2c1_1),
-+ PINCTRL_PIN_GROUP("i2c1_2", mt7622_i2c1_2),
-+ PINCTRL_PIN_GROUP("i2c2_0", mt7622_i2c2_0),
-+ PINCTRL_PIN_GROUP("i2c2_1", mt7622_i2c2_1),
-+ PINCTRL_PIN_GROUP("i2c2_2", mt7622_i2c2_2),
-+ PINCTRL_PIN_GROUP("i2s_out_mclk_bclk_ws", mt7622_i2s_out_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("i2s_in_mclk_bclk_ws", mt7622_i2s_in_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("i2s1_in_data", mt7622_i2s1_in_data),
-+ PINCTRL_PIN_GROUP("i2s2_in_data", mt7622_i2s2_in_data),
-+ PINCTRL_PIN_GROUP("i2s3_in_data", mt7622_i2s3_in_data),
-+ PINCTRL_PIN_GROUP("i2s4_in_data", mt7622_i2s4_in_data),
-+ PINCTRL_PIN_GROUP("i2s1_out_data", mt7622_i2s1_out_data),
-+ PINCTRL_PIN_GROUP("i2s2_out_data", mt7622_i2s2_out_data),
-+ PINCTRL_PIN_GROUP("i2s3_out_data", mt7622_i2s3_out_data),
-+ PINCTRL_PIN_GROUP("i2s4_out_data", mt7622_i2s4_out_data),
-+ PINCTRL_PIN_GROUP("ir_0_tx", mt7622_ir_0_tx),
-+ PINCTRL_PIN_GROUP("ir_1_tx", mt7622_ir_1_tx),
-+ PINCTRL_PIN_GROUP("ir_2_tx", mt7622_ir_2_tx),
-+ PINCTRL_PIN_GROUP("ir_0_rx", mt7622_ir_0_rx),
-+ PINCTRL_PIN_GROUP("ir_1_rx", mt7622_ir_1_rx),
-+ PINCTRL_PIN_GROUP("ir_2_rx", mt7622_ir_2_rx),
-+ PINCTRL_PIN_GROUP("mdc_mdio", mt7622_mdc_mdio),
-+ PINCTRL_PIN_GROUP("pcie0_0_waken", mt7622_pcie0_0_waken),
-+ PINCTRL_PIN_GROUP("pcie0_0_clkreq", mt7622_pcie0_0_clkreq),
-+ PINCTRL_PIN_GROUP("pcie0_1_waken", mt7622_pcie0_1_waken),
-+ PINCTRL_PIN_GROUP("pcie0_1_clkreq", mt7622_pcie0_1_clkreq),
-+ PINCTRL_PIN_GROUP("pcie1_0_waken", mt7622_pcie1_0_waken),
-+ PINCTRL_PIN_GROUP("pcie1_0_clkreq", mt7622_pcie1_0_clkreq),
-+ PINCTRL_PIN_GROUP("pcie0_pad_perst", mt7622_pcie0_pad_perst),
-+ PINCTRL_PIN_GROUP("pcie1_pad_perst", mt7622_pcie1_pad_perst),
-+ PINCTRL_PIN_GROUP("par_nand", mt7622_pnand),
-+ PINCTRL_PIN_GROUP("pmic_bus", mt7622_pmic_bus),
-+ PINCTRL_PIN_GROUP("pwm_ch1_0", mt7622_pwm_ch1_0),
-+ PINCTRL_PIN_GROUP("pwm_ch1_1", mt7622_pwm_ch1_1),
-+ PINCTRL_PIN_GROUP("pwm_ch1_2", mt7622_pwm_ch1_2),
-+ PINCTRL_PIN_GROUP("pwm_ch2_0", mt7622_pwm_ch2_0),
-+ PINCTRL_PIN_GROUP("pwm_ch2_1", mt7622_pwm_ch2_1),
-+ PINCTRL_PIN_GROUP("pwm_ch2_2", mt7622_pwm_ch2_2),
-+ PINCTRL_PIN_GROUP("pwm_ch3_0", mt7622_pwm_ch3_0),
-+ PINCTRL_PIN_GROUP("pwm_ch3_1", mt7622_pwm_ch3_1),
-+ PINCTRL_PIN_GROUP("pwm_ch3_2", mt7622_pwm_ch3_2),
-+ PINCTRL_PIN_GROUP("pwm_ch4_0", mt7622_pwm_ch4_0),
-+ PINCTRL_PIN_GROUP("pwm_ch4_1", mt7622_pwm_ch4_1),
-+ PINCTRL_PIN_GROUP("pwm_ch4_2", mt7622_pwm_ch4_2),
-+ PINCTRL_PIN_GROUP("pwm_ch4_3", mt7622_pwm_ch4_3),
-+ PINCTRL_PIN_GROUP("pwm_ch5_0", mt7622_pwm_ch5_0),
-+ PINCTRL_PIN_GROUP("pwm_ch5_1", mt7622_pwm_ch5_1),
-+ PINCTRL_PIN_GROUP("pwm_ch5_2", mt7622_pwm_ch5_2),
-+ PINCTRL_PIN_GROUP("pwm_ch6_0", mt7622_pwm_ch6_0),
-+ PINCTRL_PIN_GROUP("pwm_ch6_1", mt7622_pwm_ch6_1),
-+ PINCTRL_PIN_GROUP("pwm_ch6_2", mt7622_pwm_ch6_2),
-+ PINCTRL_PIN_GROUP("pwm_ch6_3", mt7622_pwm_ch6_3),
-+ PINCTRL_PIN_GROUP("pwm_ch7_0", mt7622_pwm_ch7_0),
-+ PINCTRL_PIN_GROUP("pwm_ch7_1", mt7622_pwm_ch7_1),
-+ PINCTRL_PIN_GROUP("pwm_ch7_2", mt7622_pwm_ch7_2),
-+ PINCTRL_PIN_GROUP("sd_0", mt7622_sd_0),
-+ PINCTRL_PIN_GROUP("sd_1", mt7622_sd_1),
-+ PINCTRL_PIN_GROUP("snfi", mt7622_snfi),
-+ PINCTRL_PIN_GROUP("spi_nor", mt7622_spi),
-+ PINCTRL_PIN_GROUP("spic0_0", mt7622_spic0_0),
-+ PINCTRL_PIN_GROUP("spic0_1", mt7622_spic0_1),
-+ PINCTRL_PIN_GROUP("spic1_0", mt7622_spic1_0),
-+ PINCTRL_PIN_GROUP("spic1_1", mt7622_spic1_1),
-+ PINCTRL_PIN_GROUP("spic2_0", mt7622_spic2_0),
-+ PINCTRL_PIN_GROUP("spic2_0_wp_hold", mt7622_spic2_0_wp_hold),
-+ PINCTRL_PIN_GROUP("tdm_0_out_mclk_bclk_ws",
-+ mt7622_tdm_0_out_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("tdm_0_in_mclk_bclk_ws",
-+ mt7622_tdm_0_in_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("tdm_0_out_data", mt7622_tdm_0_out_data),
-+ PINCTRL_PIN_GROUP("tdm_0_in_data", mt7622_tdm_0_in_data),
-+ PINCTRL_PIN_GROUP("tdm_1_out_mclk_bclk_ws",
-+ mt7622_tdm_1_out_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("tdm_1_in_mclk_bclk_ws",
-+ mt7622_tdm_1_in_mclk_bclk_ws),
-+ PINCTRL_PIN_GROUP("tdm_1_out_data", mt7622_tdm_1_out_data),
-+ PINCTRL_PIN_GROUP("tdm_1_in_data", mt7622_tdm_1_in_data),
-+ PINCTRL_PIN_GROUP("uart0_0_tx_rx", mt7622_uart0_0_tx_rx),
-+ PINCTRL_PIN_GROUP("uart1_0_tx_rx", mt7622_uart1_0_tx_rx),
-+ PINCTRL_PIN_GROUP("uart1_0_rts_cts", mt7622_uart1_0_rts_cts),
-+ PINCTRL_PIN_GROUP("uart1_1_tx_rx", mt7622_uart1_1_tx_rx),
-+ PINCTRL_PIN_GROUP("uart1_1_rts_cts", mt7622_uart1_1_rts_cts),
-+ PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7622_uart2_0_tx_rx),
-+ PINCTRL_PIN_GROUP("uart2_0_rts_cts", mt7622_uart2_0_rts_cts),
-+ PINCTRL_PIN_GROUP("uart2_1_tx_rx", mt7622_uart2_1_tx_rx),
-+ PINCTRL_PIN_GROUP("uart2_1_rts_cts", mt7622_uart2_1_rts_cts),
-+ PINCTRL_PIN_GROUP("uart2_2_tx_rx", mt7622_uart2_2_tx_rx),
-+ PINCTRL_PIN_GROUP("uart2_2_rts_cts", mt7622_uart2_2_rts_cts),
-+ PINCTRL_PIN_GROUP("uart2_3_tx_rx", mt7622_uart2_3_tx_rx),
-+ PINCTRL_PIN_GROUP("uart3_0_tx_rx", mt7622_uart3_0_tx_rx),
-+ PINCTRL_PIN_GROUP("uart3_1_tx_rx", mt7622_uart3_1_tx_rx),
-+ PINCTRL_PIN_GROUP("uart3_1_rts_cts", mt7622_uart3_1_rts_cts),
-+ PINCTRL_PIN_GROUP("uart4_0_tx_rx", mt7622_uart4_0_tx_rx),
-+ PINCTRL_PIN_GROUP("uart4_1_tx_rx", mt7622_uart4_1_tx_rx),
-+ PINCTRL_PIN_GROUP("uart4_1_rts_cts", mt7622_uart4_1_rts_cts),
-+ PINCTRL_PIN_GROUP("uart4_2_tx_rx", mt7622_uart4_2_tx_rx),
-+ PINCTRL_PIN_GROUP("uart4_2_rts_cts", mt7622_uart4_2_rts_cts),
-+ PINCTRL_PIN_GROUP("watchdog", mt7622_watchdog),
-+ PINCTRL_PIN_GROUP("wled", mt7622_wled),
-+};
-+
-+/* Joint those groups owning the same capability in user point of view which
-+ * allows that people tend to use through the device tree.
-+ */
-+static const char *mt7622_emmc_groups[] = { "emmc", "emmc_rst", };
-+static const char *mt7622_ethernet_groups[] = { "esw", "esw_p0_p1",
-+ "esw_p2_p3_p4", "mdc_mdio",
-+ "rgmii_via_gmac1",
-+ "rgmii_via_gmac2",
-+ "rgmii_via_esw", };
-+static const char *mt7622_i2c_groups[] = { "i2c0", "i2c1_0", "i2c1_1",
-+ "i2c1_2", "i2c2_0", "i2c2_1",
-+ "i2c2_2", };
-+static const char *mt7622_i2s_groups[] = { "i2s_out_mclk_bclk_ws",
-+ "i2s_in_mclk_bclk_ws",
-+ "i2s1_in_data", "i2s2_in_data",
-+ "i2s3_in_data", "i2s4_in_data",
-+ "i2s1_out_data", "i2s2_out_data",
-+ "i2s3_out_data", "i2s4_out_data", };
-+static const char *mt7622_ir_groups[] = { "ir_0_tx", "ir_1_tx", "ir_2_tx",
-+ "ir_0_rx", "ir_1_rx", "ir_2_rx"};
-+static const char *mt7622_led_groups[] = { "ephy_leds", "ephy0_led",
-+ "ephy1_led", "ephy2_led",
-+ "ephy3_led", "ephy4_led",
-+ "wled", };
-+static const char *mt7622_flash_groups[] = { "par_nand", "snfi", "spi_nor"};
-+static const char *mt7622_pcie_groups[] = { "pcie0_0_waken", "pcie0_0_clkreq",
-+ "pcie0_1_waken", "pcie0_1_clkreq",
-+ "pcie1_0_waken", "pcie1_0_clkreq",
-+ "pcie0_pad_perst",
-+ "pcie1_pad_perst", };
-+static const char *mt7622_pmic_bus_groups[] = { "pmic_bus", };
-+static const char *mt7622_pwm_groups[] = { "pwm_ch1_0", "pwm_ch1_1",
-+ "pwm_ch1_2", "pwm_ch2_0",
-+ "pwm_ch2_1", "pwm_ch2_2",
-+ "pwm_ch3_0", "pwm_ch3_1",
-+ "pwm_ch3_2", "pwm_ch4_0",
-+ "pwm_ch4_1", "pwm_ch4_2",
-+ "pwm_ch4_3", "pwm_ch5_0",
-+ "pwm_ch5_1", "pwm_ch5_2",
-+ "pwm_ch6_0", "pwm_ch6_1",
-+ "pwm_ch6_2", "pwm_ch6_3",
-+ "pwm_ch7_0", "pwm_ch7_1",
-+ "pwm_ch7_2", };
-+static const char *mt7622_sd_groups[] = { "sd_0", "sd_1", };
-+static const char *mt7622_spic_groups[] = { "spic0_0", "spic0_1", "spic1_0",
-+ "spic1_1", "spic2_0",
-+ "spic2_0_wp_hold", };
-+static const char *mt7622_tdm_groups[] = { "tdm_0_out_mclk_bclk_ws",
-+ "tdm_0_in_mclk_bclk_ws",
-+ "tdm_0_out_data",
-+ "tdm_0_in_data",
-+ "tdm_1_out_mclk_bclk_ws",
-+ "tdm_1_in_mclk_bclk_ws",
-+ "tdm_1_out_data",
-+ "tdm_1_in_data", };
-+
-+static const char *mt7622_uart_groups[] = { "uart0_0_tx_rx",
-+ "uart1_0_tx_rx", "uart1_0_rts_cts",
-+ "uart1_1_tx_rx", "uart1_1_rts_cts",
-+ "uart2_0_tx_rx", "uart2_0_rts_cts",
-+ "uart2_1_tx_rx", "uart2_1_rts_cts",
-+ "uart2_2_tx_rx", "uart2_2_rts_cts",
-+ "uart2_3_tx_rx",
-+ "uart3_0_tx_rx",
-+ "uart3_1_tx_rx", "uart3_1_rts_cts",
-+ "uart4_0_tx_rx",
-+ "uart4_1_tx_rx", "uart4_1_rts_cts",
-+ "uart4_2_tx_rx",
-+ "uart4_2_rts_cts",};
-+static const char *mt7622_wdt_groups[] = { "watchdog", };
-+
-+static const struct function_desc mt7622_functions[] = {
-+ {"emmc", mt7622_emmc_groups, ARRAY_SIZE(mt7622_emmc_groups)},
-+ {"eth", mt7622_ethernet_groups, ARRAY_SIZE(mt7622_ethernet_groups)},
-+ {"i2c", mt7622_i2c_groups, ARRAY_SIZE(mt7622_i2c_groups)},
-+ {"i2s", mt7622_i2s_groups, ARRAY_SIZE(mt7622_i2s_groups)},
-+ {"ir", mt7622_ir_groups, ARRAY_SIZE(mt7622_ir_groups)},
-+ {"led", mt7622_led_groups, ARRAY_SIZE(mt7622_led_groups)},
-+ {"flash", mt7622_flash_groups, ARRAY_SIZE(mt7622_flash_groups)},
-+ {"pcie", mt7622_pcie_groups, ARRAY_SIZE(mt7622_pcie_groups)},
-+ {"pmic", mt7622_pmic_bus_groups, ARRAY_SIZE(mt7622_pmic_bus_groups)},
-+ {"pwm", mt7622_pwm_groups, ARRAY_SIZE(mt7622_pwm_groups)},
-+ {"sd", mt7622_sd_groups, ARRAY_SIZE(mt7622_sd_groups)},
-+ {"spi", mt7622_spic_groups, ARRAY_SIZE(mt7622_spic_groups)},
-+ {"tdm", mt7622_tdm_groups, ARRAY_SIZE(mt7622_tdm_groups)},
-+ {"uart", mt7622_uart_groups, ARRAY_SIZE(mt7622_uart_groups)},
-+ {"watchdog", mt7622_wdt_groups, ARRAY_SIZE(mt7622_wdt_groups)},
-+};
-+
-+static const struct pinconf_generic_params mtk_custom_bindings[] = {
-+ {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
-+ {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+static const struct pin_config_item mtk_conf_items[] = {
-+ PCONFDUMP(MTK_PIN_CONFIG_TDSEL, "tdsel", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
-+};
-+#endif
-+
-+static const struct mtk_pin_soc mt7622_data = {
-+ .reg_cal = mt7622_reg_cals,
-+ .pins = mt7622_pins,
-+ .npins = ARRAY_SIZE(mt7622_pins),
-+ .grps = mt7622_groups,
-+ .ngrps = ARRAY_SIZE(mt7622_groups),
-+ .funcs = mt7622_functions,
-+ .nfuncs = ARRAY_SIZE(mt7622_functions),
-+};
-+
-+static void mtk_w32(struct mtk_pinctrl *pctl, u32 reg, u32 val)
-+{
-+ writel_relaxed(val, pctl->base + reg);
-+}
-+
-+static u32 mtk_r32(struct mtk_pinctrl *pctl, u32 reg)
-+{
-+ return readl_relaxed(pctl->base + reg);
-+}
-+
-+static void mtk_rmw(struct mtk_pinctrl *pctl, u32 reg, u32 mask, u32 set)
-+{
-+ u32 val;
-+
-+ val = mtk_r32(pctl, reg);
-+ val &= ~mask;
-+ val |= set;
-+ mtk_w32(pctl, reg, val);
-+}
-+
-+static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw, int pin,
-+ const struct mtk_pin_reg_calc *rc,
-+ struct mtk_pin_field *pfd)
-+{
-+ const struct mtk_pin_field_calc *c, *e;
-+ u32 bits;
-+
-+ c = rc->range;
-+ e = c + rc->nranges;
-+
-+ while (c < e) {
-+ if (pin >= c->s_pin && pin <= c->e_pin)
-+ break;
-+ c++;
-+ }
-+
-+ if (c >= e) {
-+ dev_err(hw->dev, "Out of range for pin = %d\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ /* Caculated bits as the overall offset the pin is located at */
-+ bits = c->s_bit + (pin - c->s_pin) * (c->x_bits);
-+
-+ /* Fill pfd from bits and 32-bit register applied is assumed */
-+ pfd->offset = c->s_addr + c->x_addrs * (bits / 32);
-+ pfd->bitpos = bits % 32;
-+ pfd->mask = (1 << c->x_bits) - 1;
-+
-+ /* pfd->next is used for indicating that bit wrapping-around happens
-+ * which requires the manipulation for bit 0 starting in the next
-+ * register to form the complete field read/write.
-+ */
-+ pfd->next = pfd->bitpos + c->x_bits - 1 > 31 ? c->x_addrs : 0;
-+
-+ return 0;
-+}
-+
-+static int mtk_hw_pin_field_get(struct mtk_pinctrl *hw, int pin,
-+ int field, struct mtk_pin_field *pfd)
-+{
-+ const struct mtk_pin_reg_calc *rc;
-+
-+ if (field < 0 || field >= PINCTRL_PIN_REG_MAX) {
-+ dev_err(hw->dev, "Invalid Field %d\n", field);
-+ return -EINVAL;
-+ }
-+
-+ if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
-+ rc = &hw->soc->reg_cal[field];
-+ } else {
-+ dev_err(hw->dev, "Undefined range for field %d\n", field);
-+ return -EINVAL;
-+ }
-+
-+ return mtk_hw_pin_field_lookup(hw, pin, rc, pfd);
-+}
-+
-+static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
-+{
-+ *l = 32 - pf->bitpos;
-+ *h = get_count_order(pf->mask) - *l;
-+}
-+
-+static void mtk_hw_write_cross_field(struct mtk_pinctrl *hw,
-+ struct mtk_pin_field *pf, int value)
-+{
-+ int nbits_l, nbits_h;
-+
-+ mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
-+
-+ mtk_rmw(hw, pf->offset, pf->mask << pf->bitpos,
-+ (value & pf->mask) << pf->bitpos);
-+
-+ mtk_rmw(hw, pf->offset + pf->next, BIT(nbits_h) - 1,
-+ (value & pf->mask) >> nbits_l);
-+}
-+
-+static void mtk_hw_read_cross_field(struct mtk_pinctrl *hw,
-+ struct mtk_pin_field *pf, int *value)
-+{
-+ int nbits_l, nbits_h, h, l;
-+
-+ mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
-+
-+ l = (mtk_r32(hw, pf->offset) >> pf->bitpos) & (BIT(nbits_l) - 1);
-+ h = (mtk_r32(hw, pf->offset + pf->next)) & (BIT(nbits_h) - 1);
-+
-+ *value = (h << nbits_l) | l;
-+}
-+
-+static int mtk_hw_set_value(struct mtk_pinctrl *hw, int pin, int field,
-+ int value)
-+{
-+ struct mtk_pin_field pf;
-+ int err;
-+
-+ err = mtk_hw_pin_field_get(hw, pin, field, &pf);
-+ if (err)
-+ return err;
-+
-+ if (!pf.next)
-+ mtk_rmw(hw, pf.offset, pf.mask << pf.bitpos,
-+ (value & pf.mask) << pf.bitpos);
-+ else
-+ mtk_hw_write_cross_field(hw, &pf, value);
-+
-+ return 0;
-+}
-+
-+static int mtk_hw_get_value(struct mtk_pinctrl *hw, int pin, int field,
-+ int *value)
-+{
-+ struct mtk_pin_field pf;
-+ int err;
-+
-+ err = mtk_hw_pin_field_get(hw, pin, field, &pf);
-+ if (err)
-+ return err;
-+
-+ if (!pf.next)
-+ *value = (mtk_r32(hw, pf.offset) >> pf.bitpos) & pf.mask;
-+ else
-+ mtk_hw_read_cross_field(hw, &pf, value);
-+
-+ return 0;
-+}
-+
-+static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
-+ unsigned int selector, unsigned int group)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ struct function_desc *func;
-+ struct group_desc *grp;
-+ int i;
-+
-+ func = pinmux_generic_get_function(pctldev, selector);
-+ if (!func)
-+ return -EINVAL;
-+
-+ grp = pinctrl_generic_get_group(pctldev, group);
-+ if (!grp)
-+ return -EINVAL;
-+
-+ dev_dbg(pctldev->dev, "enable function %s group %s\n",
-+ func->name, grp->name);
-+
-+ for (i = 0; i < grp->num_pins; i++) {
-+ int *pin_modes = grp->data;
-+
-+ mtk_hw_set_value(hw, grp->pins[i], PINCTRL_PIN_REG_MODE,
-+ pin_modes[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ return mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_MODE, MTK_GPIO_MODE);
-+}
-+
-+static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin, bool input)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ /* hardware would take 0 as input direction */
-+ return mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR, !input);
-+}
-+
-+static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
-+ unsigned int pin, unsigned long *config)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ u32 param = pinconf_to_config_param(*config);
-+ int val, val2, err, reg, ret = 1;
-+
-+ switch (param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_PU, &val);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_PD, &val2);
-+ if (err)
-+ return err;
-+
-+ if (val || val2)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ case PIN_CONFIG_SLEW_RATE:
-+ reg = (param == PIN_CONFIG_BIAS_PULL_UP) ?
-+ PINCTRL_PIN_REG_PU :
-+ (param == PIN_CONFIG_BIAS_PULL_DOWN) ?
-+ PINCTRL_PIN_REG_PD : PINCTRL_PIN_REG_SR;
-+
-+ err = mtk_hw_get_value(hw, pin, reg, &val);
-+ if (err)
-+ return err;
-+
-+ if (!val)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return -EINVAL;
-+
-+ /* HW takes input mode as zero; output mode as non-zero */
-+ if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-+ (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_SMT, &val2);
-+ if (err)
-+ return err;
-+
-+ if (val || !val2)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E4, &val);
-+ if (err)
-+ return -EINVAL;
-+
-+ err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E8, &val2);
-+ if (err)
-+ return -EINVAL;
-+
-+ /* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1)
-+ * 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1)
-+ */
-+ ret = ((val2 << 1) + val + 1) * 4;
-+
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_get_value(hw, pin, reg, &val);
-+ if (err)
-+ return -EINVAL;
-+
-+ ret = val;
-+
-+ break;
-+ default:
-+ return -ENOTSUPP;
-+ }
-+
-+ *config = pinconf_to_config_packed(param, ret);
-+
-+ return 0;
-+}
-+
-+static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-+ unsigned long *configs, unsigned int num_configs)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ u32 reg, param, arg;
-+ int cfg, err = 0;
-+
-+ for (cfg = 0; cfg < num_configs; cfg++) {
-+ param = pinconf_to_config_param(configs[cfg]);
-+ arg = pinconf_to_config_argument(configs[cfg]);
-+
-+ switch (param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ arg = (param == PIN_CONFIG_BIAS_DISABLE) ? 0 :
-+ (param == PIN_CONFIG_BIAS_PULL_UP) ? 1 : 2;
-+
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_PU,
-+ arg & 1);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_PD,
-+ !!(arg & 2));
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_SMT,
-+ MTK_DISABLE);
-+ if (err)
-+ goto err;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+ case PIN_CONFIG_SLEW_RATE:
-+ reg = (param == PIN_CONFIG_SLEW_RATE) ?
-+ PINCTRL_PIN_REG_SR : PINCTRL_PIN_REG_DIR;
-+
-+ arg = (param == PIN_CONFIG_INPUT_ENABLE) ? 0 :
-+ (param == PIN_CONFIG_OUTPUT_ENABLE) ? 1 : arg;
-+ err = mtk_hw_set_value(hw, pin, reg, arg);
-+ if (err)
-+ goto err;
-+
-+ break;
-+ case PIN_CONFIG_OUTPUT:
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR,
-+ MTK_OUTPUT);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DO,
-+ arg);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ /* arg = 1: Input mode & SMT enable ;
-+ * arg = 0: Output mode & SMT disable
-+ */
-+ arg = arg ? 2 : 1;
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR,
-+ arg & 1);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_SMT,
-+ !!(arg & 2));
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ /* 4mA when (e8, e4) = (0, 0);
-+ * 8mA when (e8, e4) = (0, 1);
-+ * 12mA when (e8, e4) = (1, 0);
-+ * 16mA when (e8, e4) = (1, 1)
-+ */
-+ if (!(arg % 4) && (arg >= 4 && arg <= 16)) {
-+ arg = arg / 4 - 1;
-+ err = mtk_hw_set_value(hw, pin,
-+ PINCTRL_PIN_REG_E4,
-+ arg & 0x1);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, pin,
-+ PINCTRL_PIN_REG_E8,
-+ (arg & 0x2) >> 1);
-+ if (err)
-+ goto err;
-+ } else {
-+ err = -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_set_value(hw, pin, reg, arg);
-+ if (err)
-+ goto err;
-+ break;
-+ default:
-+ err = -ENOTSUPP;
-+ }
-+ }
-+err:
-+ return err;
-+}
-+
-+static int mtk_pinconf_group_get(struct pinctrl_dev *pctldev,
-+ unsigned int group, unsigned long *config)
-+{
-+ const unsigned int *pins;
-+ unsigned int i, npins, old = 0;
-+ int ret;
-+
-+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < npins; i++) {
-+ if (mtk_pinconf_get(pctldev, pins[i], config))
-+ return -ENOTSUPP;
-+
-+ /* configs do not match between two pins */
-+ if (i && old != *config)
-+ return -ENOTSUPP;
-+
-+ old = *config;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_pinconf_group_set(struct pinctrl_dev *pctldev,
-+ unsigned int group, unsigned long *configs,
-+ unsigned int num_configs)
-+{
-+ const unsigned int *pins;
-+ unsigned int i, npins;
-+ int ret;
-+
-+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < npins; i++) {
-+ ret = mtk_pinconf_set(pctldev, pins[i], configs, num_configs);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops mtk_pctlops = {
-+ .get_groups_count = pinctrl_generic_get_group_count,
-+ .get_group_name = pinctrl_generic_get_group_name,
-+ .get_group_pins = pinctrl_generic_get_group_pins,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
-+ .dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+static const struct pinmux_ops mtk_pmxops = {
-+ .get_functions_count = pinmux_generic_get_function_count,
-+ .get_function_name = pinmux_generic_get_function_name,
-+ .get_function_groups = pinmux_generic_get_function_groups,
-+ .set_mux = mtk_pinmux_set_mux,
-+ .gpio_request_enable = mtk_pinmux_gpio_request_enable,
-+ .gpio_set_direction = mtk_pinmux_gpio_set_direction,
-+ .strict = true,
-+};
-+
-+static const struct pinconf_ops mtk_confops = {
-+ .is_generic = true,
-+ .pin_config_get = mtk_pinconf_get,
-+ .pin_config_set = mtk_pinconf_set,
-+ .pin_config_group_get = mtk_pinconf_group_get,
-+ .pin_config_group_set = mtk_pinconf_group_set,
-+ .pin_config_config_dbg_show = pinconf_generic_dump_config,
-+};
-+
-+static struct pinctrl_desc mtk_desc = {
-+ .name = PINCTRL_PINCTRL_DEV,
-+ .pctlops = &mtk_pctlops,
-+ .pmxops = &mtk_pmxops,
-+ .confops = &mtk_confops,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent);
-+ int value;
-+
-+ mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
-+
-+ return !!value;
-+}
-+
-+static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
-+{
-+ struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent);
-+
-+ mtk_hw_set_value(hw, gpio, PINCTRL_PIN_REG_DO, !!value);
-+}
-+
-+static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ return pinctrl_gpio_direction_input(chip->base + gpio);
-+}
-+
-+static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
-+ int value)
-+{
-+ mtk_gpio_set(chip, gpio, value);
-+
-+ return pinctrl_gpio_direction_output(chip->base + gpio);
-+}
-+
-+static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
-+{
-+ struct gpio_chip *chip = &hw->chip;
-+ int ret;
-+
-+ chip->label = PINCTRL_PINCTRL_DEV;
-+ chip->parent = hw->dev;
-+ chip->request = gpiochip_generic_request;
-+ chip->free = gpiochip_generic_free;
-+ chip->direction_input = mtk_gpio_direction_input;
-+ chip->direction_output = mtk_gpio_direction_output;
-+ chip->get = mtk_gpio_get;
-+ chip->set = mtk_gpio_set;
-+ chip->base = -1;
-+ chip->ngpio = hw->soc->npins;
-+ chip->of_node = np;
-+ chip->of_gpio_n_cells = 2;
-+
-+ ret = gpiochip_add_data(chip, hw);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
-+ chip->ngpio);
-+ if (ret < 0) {
-+ gpiochip_remove(chip);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_build_groups(struct mtk_pinctrl *hw)
-+{
-+ int err, i;
-+
-+ for (i = 0; i < hw->soc->ngrps; i++) {
-+ const struct group_desc *group = hw->soc->grps + i;
-+
-+ err = pinctrl_generic_add_group(hw->pctrl, group->name,
-+ group->pins, group->num_pins,
-+ group->data);
-+ if (err) {
-+ dev_err(hw->dev, "Failed to register group %s\n",
-+ group->name);
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_build_functions(struct mtk_pinctrl *hw)
-+{
-+ int i, err;
-+
-+ for (i = 0; i < hw->soc->nfuncs ; i++) {
-+ const struct function_desc *func = hw->soc->funcs + i;
-+
-+ err = pinmux_generic_add_function(hw->pctrl, func->name,
-+ func->group_names,
-+ func->num_group_names,
-+ func->data);
-+ if (err) {
-+ dev_err(hw->dev, "Failed to register function %s\n",
-+ func->name);
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mtk_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt7622-pinctrl", .data = &mt7622_data},
-+ { }
-+};
-+
-+static int mtk_pinctrl_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct mtk_pinctrl *hw;
-+ const struct of_device_id *of_id =
-+ of_match_device(mtk_pinctrl_of_match, &pdev->dev);
-+ int err;
-+
-+ hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL);
-+ if (!hw)
-+ return -ENOMEM;
-+
-+ hw->soc = of_id->data;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "missing IO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hw->dev = &pdev->dev;
-+ hw->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hw->base))
-+ return PTR_ERR(hw->base);
-+
-+ /* Setup pins descriptions per SoC types */
-+ mtk_desc.pins = hw->soc->pins;
-+ mtk_desc.npins = hw->soc->npins;
-+ mtk_desc.num_custom_params = ARRAY_SIZE(mtk_custom_bindings);
-+ mtk_desc.custom_params = mtk_custom_bindings;
-+#ifdef CONFIG_DEBUG_FS
-+ mtk_desc.custom_conf_items = mtk_conf_items;
-+#endif
-+
-+ hw->pctrl = devm_pinctrl_register(&pdev->dev, &mtk_desc, hw);
-+ if (IS_ERR(hw->pctrl))
-+ return PTR_ERR(hw->pctrl);
-+
-+ /* Setup groups descriptions per SoC types */
-+ err = mtk_build_groups(hw);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to build groups\n");
-+ return 0;
-+ }
-+
-+ /* Setup functions descriptions per SoC types */
-+ err = mtk_build_functions(hw);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to build functions\n");
-+ return err;
-+ }
-+
-+ err = mtk_build_gpiochip(hw, pdev->dev.of_node);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to add gpio_chip\n");
-+ return err;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_pinctrl_driver = {
-+ .driver = {
-+ .name = "mtk-pinctrl",
-+ .of_match_table = mtk_pinctrl_of_match,
-+ },
-+ .probe = mtk_pinctrl_probe,
-+};
-+
-+static int __init mtk_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mtk_pinctrl_driver);
-+}
-+arch_initcall(mtk_pinctrl_init);
diff --git a/target/linux/mediatek/patches-4.14/0172-clk-mediatek-group-drivers-under-indpendent-menu.patch b/target/linux/mediatek/patches-4.14/0172-clk-mediatek-group-drivers-under-indpendent-menu.patch
deleted file mode 100644
index 2e4c233e87..0000000000
--- a/target/linux/mediatek/patches-4.14/0172-clk-mediatek-group-drivers-under-indpendent-menu.patch
+++ /dev/null
@@ -1,223 +0,0 @@
-From 13ee94af58240b75550f413fece707987d563193 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 20 Dec 2017 14:42:58 +0800
-Subject: [PATCH 172/224] clk: mediatek: group drivers under indpendent menu
-
-Getting much MediaTek clock driver have been added to CCF, so it's
-better adding the cleanup for grouping drivers under the independent
-menu to simplify configuration selection. In addition, really trivial
-fixups for typos are added in the same patch.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mediatek/Kconfig | 96 +++++++++++++++++++++++---------------------
- 1 file changed, 50 insertions(+), 46 deletions(-)
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -1,136 +1,139 @@
- #
--# MediaTek SoC drivers
-+# MediaTek Clock Drivers
- #
-+menu "Clock driver for MediaTek SoC"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+
- config COMMON_CLK_MEDIATEK
- bool
- ---help---
-- Mediatek SoCs' clock support.
-+ MediaTek SoCs' clock support.
-
- config COMMON_CLK_MT2701
-- bool "Clock driver for Mediatek MT2701"
-+ bool "Clock driver for MediaTek MT2701"
- depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
- select COMMON_CLK_MEDIATEK
- default ARCH_MEDIATEK && ARM
- ---help---
-- This driver supports Mediatek MT2701 basic clocks.
-+ This driver supports MediaTek MT2701 basic clocks.
-
- config COMMON_CLK_MT2701_MMSYS
-- bool "Clock driver for Mediatek MT2701 mmsys"
-+ bool "Clock driver for MediaTek MT2701 mmsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 mmsys clocks.
-+ This driver supports MediaTek MT2701 mmsys clocks.
-
- config COMMON_CLK_MT2701_IMGSYS
-- bool "Clock driver for Mediatek MT2701 imgsys"
-+ bool "Clock driver for MediaTek MT2701 imgsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 imgsys clocks.
-+ This driver supports MediaTek MT2701 imgsys clocks.
-
- config COMMON_CLK_MT2701_VDECSYS
-- bool "Clock driver for Mediatek MT2701 vdecsys"
-+ bool "Clock driver for MediaTek MT2701 vdecsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 vdecsys clocks.
-+ This driver supports MediaTek MT2701 vdecsys clocks.
-
- config COMMON_CLK_MT2701_HIFSYS
-- bool "Clock driver for Mediatek MT2701 hifsys"
-+ bool "Clock driver for MediaTek MT2701 hifsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 hifsys clocks.
-+ This driver supports MediaTek MT2701 hifsys clocks.
-
- config COMMON_CLK_MT2701_ETHSYS
-- bool "Clock driver for Mediatek MT2701 ethsys"
-+ bool "Clock driver for MediaTek MT2701 ethsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 ethsys clocks.
-+ This driver supports MediaTek MT2701 ethsys clocks.
-
- config COMMON_CLK_MT2701_BDPSYS
-- bool "Clock driver for Mediatek MT2701 bdpsys"
-+ bool "Clock driver for MediaTek MT2701 bdpsys"
- depends on COMMON_CLK_MT2701
- ---help---
-- This driver supports Mediatek MT2701 bdpsys clocks.
-+ This driver supports MediaTek MT2701 bdpsys clocks.
-
- config COMMON_CLK_MT2712
-- bool "Clock driver for Mediatek MT2712"
-+ bool "Clock driver for MediaTek MT2712"
- depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
- select COMMON_CLK_MEDIATEK
- default ARCH_MEDIATEK && ARM64
- ---help---
-- This driver supports Mediatek MT2712 basic clocks.
-+ This driver supports MediaTek MT2712 basic clocks.
-
- config COMMON_CLK_MT2712_BDPSYS
-- bool "Clock driver for Mediatek MT2712 bdpsys"
-+ bool "Clock driver for MediaTek MT2712 bdpsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 bdpsys clocks.
-+ This driver supports MediaTek MT2712 bdpsys clocks.
-
- config COMMON_CLK_MT2712_IMGSYS
-- bool "Clock driver for Mediatek MT2712 imgsys"
-+ bool "Clock driver for MediaTek MT2712 imgsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 imgsys clocks.
-+ This driver supports MediaTek MT2712 imgsys clocks.
-
- config COMMON_CLK_MT2712_JPGDECSYS
-- bool "Clock driver for Mediatek MT2712 jpgdecsys"
-+ bool "Clock driver for MediaTek MT2712 jpgdecsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 jpgdecsys clocks.
-+ This driver supports MediaTek MT2712 jpgdecsys clocks.
-
- config COMMON_CLK_MT2712_MFGCFG
-- bool "Clock driver for Mediatek MT2712 mfgcfg"
-+ bool "Clock driver for MediaTek MT2712 mfgcfg"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 mfgcfg clocks.
-+ This driver supports MediaTek MT2712 mfgcfg clocks.
-
- config COMMON_CLK_MT2712_MMSYS
-- bool "Clock driver for Mediatek MT2712 mmsys"
-+ bool "Clock driver for MediaTek MT2712 mmsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 mmsys clocks.
-+ This driver supports MediaTek MT2712 mmsys clocks.
-
- config COMMON_CLK_MT2712_VDECSYS
-- bool "Clock driver for Mediatek MT2712 vdecsys"
-+ bool "Clock driver for MediaTek MT2712 vdecsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 vdecsys clocks.
-+ This driver supports MediaTek MT2712 vdecsys clocks.
-
- config COMMON_CLK_MT2712_VENCSYS
-- bool "Clock driver for Mediatek MT2712 vencsys"
-+ bool "Clock driver for MediaTek MT2712 vencsys"
- depends on COMMON_CLK_MT2712
- ---help---
-- This driver supports Mediatek MT2712 vencsys clocks.
-+ This driver supports MediaTek MT2712 vencsys clocks.
-
- config COMMON_CLK_MT6797
-- bool "Clock driver for Mediatek MT6797"
-+ bool "Clock driver for MediaTek MT6797"
- depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
- select COMMON_CLK_MEDIATEK
- default ARCH_MEDIATEK && ARM64
- ---help---
-- This driver supports Mediatek MT6797 basic clocks.
-+ This driver supports MediaTek MT6797 basic clocks.
-
- config COMMON_CLK_MT6797_MMSYS
-- bool "Clock driver for Mediatek MT6797 mmsys"
-+ bool "Clock driver for MediaTek MT6797 mmsys"
- depends on COMMON_CLK_MT6797
- ---help---
-- This driver supports Mediatek MT6797 mmsys clocks.
-+ This driver supports MediaTek MT6797 mmsys clocks.
-
- config COMMON_CLK_MT6797_IMGSYS
-- bool "Clock driver for Mediatek MT6797 imgsys"
-+ bool "Clock driver for MediaTek MT6797 imgsys"
- depends on COMMON_CLK_MT6797
- ---help---
-- This driver supports Mediatek MT6797 imgsys clocks.
-+ This driver supports MediaTek MT6797 imgsys clocks.
-
- config COMMON_CLK_MT6797_VDECSYS
-- bool "Clock driver for Mediatek MT6797 vdecsys"
-+ bool "Clock driver for MediaTek MT6797 vdecsys"
- depends on COMMON_CLK_MT6797
- ---help---
-- This driver supports Mediatek MT6797 vdecsys clocks.
-+ This driver supports MediaTek MT6797 vdecsys clocks.
-
- config COMMON_CLK_MT6797_VENCSYS
-- bool "Clock driver for Mediatek MT6797 vencsys"
-+ bool "Clock driver for MediaTek MT6797 vencsys"
- depends on COMMON_CLK_MT6797
- ---help---
-- This driver supports Mediatek MT6797 vencsys clocks.
-+ This driver supports MediaTek MT6797 vencsys clocks.
-
- config COMMON_CLK_MT7622
- bool "Clock driver for MediaTek MT7622"
-@@ -163,17 +166,18 @@ config COMMON_CLK_MT7622_AUDSYS
- to audio consumers such as I2S and TDM.
-
- config COMMON_CLK_MT8135
-- bool "Clock driver for Mediatek MT8135"
-+ bool "Clock driver for MediaTek MT8135"
- depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
- select COMMON_CLK_MEDIATEK
- default ARCH_MEDIATEK && ARM
- ---help---
-- This driver supports Mediatek MT8135 clocks.
-+ This driver supports MediaTek MT8135 clocks.
-
- config COMMON_CLK_MT8173
-- bool "Clock driver for Mediatek MT8173"
-+ bool "Clock driver for MediaTek MT8173"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- select COMMON_CLK_MEDIATEK
- default ARCH_MEDIATEK
- ---help---
-- This driver supports Mediatek MT8173 clocks.
-+ This driver supports MediaTek MT8173 clocks.
-+endmenu
diff --git a/target/linux/mediatek/patches-4.14/0173-clk-mediatek-fixup-test-building-of-MediaTek-clock-d.patch b/target/linux/mediatek/patches-4.14/0173-clk-mediatek-fixup-test-building-of-MediaTek-clock-d.patch
deleted file mode 100644
index 259a93cf2f..0000000000
--- a/target/linux/mediatek/patches-4.14/0173-clk-mediatek-fixup-test-building-of-MediaTek-clock-d.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 3f963310151f6e630f94acf73ff44493619038ff Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 20 Dec 2017 14:42:59 +0800
-Subject: [PATCH 173/224] clk: mediatek: fixup test-building of MediaTek clock
- drivers
-
-Let the build system looking into the directiory where the clock drivers
-resides for the COMPILE_TEST alternative dependency allows test-building
-the drivers.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -68,7 +68,7 @@ obj-$(CONFIG_MACH_INGENIC) += ingenic/
- obj-$(CONFIG_ARCH_K3) += keystone/
- obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
- obj-$(CONFIG_MACH_LOONGSON32) += loongson1/
--obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
-+obj-y += mediatek/
- obj-$(CONFIG_COMMON_CLK_AMLOGIC) += meson/
- obj-$(CONFIG_MACH_PIC32) += microchip/
- ifeq ($(CONFIG_COMMON_CLK), y)
diff --git a/target/linux/mediatek/patches-4.14/0174-dt-bindings-net-mediatek-add-condition-to-property-m.patch b/target/linux/mediatek/patches-4.14/0174-dt-bindings-net-mediatek-add-condition-to-property-m.patch
deleted file mode 100644
index ae63b2f50b..0000000000
--- a/target/linux/mediatek/patches-4.14/0174-dt-bindings-net-mediatek-add-condition-to-property-m.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From ee687ebf4708fb9e2a64830cdecd8cf992ef9b2b Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 20 Dec 2017 17:47:05 +0800
-Subject: [PATCH 174/224] dt-bindings: net: mediatek: add condition to property
- mediatek, pctl
-
-The property "mediatek,pctl" is only required for SoCs such as MT2701 and
-MT7623, so adding a few words for stating the condition.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/mediatek-net.txt | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/net/mediatek-net.txt
-+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
-@@ -28,7 +28,7 @@ Required properties:
- - mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup
- which is required for those SoCs equipped with SGMII such as MT7622 SoC.
- - mediatek,pctl: phandle to the syscon node that handles the ports slew rate
-- and driver current
-+ and driver current: only for MT2701 and MT7623 SoC
-
- Optional properties:
- - interrupt-parent: Should be the phandle for the interrupt controller
diff --git a/target/linux/mediatek/patches-4.14/0175-net-mediatek-remove-superfluous-pin-setup-for-MT7622.patch b/target/linux/mediatek/patches-4.14/0175-net-mediatek-remove-superfluous-pin-setup-for-MT7622.patch
deleted file mode 100644
index db05fd994d..0000000000
--- a/target/linux/mediatek/patches-4.14/0175-net-mediatek-remove-superfluous-pin-setup-for-MT7622.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From d96cf7e724105dc73f623c2019ab5bc78cef036e Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 20 Dec 2017 17:47:06 +0800
-Subject: [PATCH 175/224] net: mediatek: remove superfluous pin setup for
- MT7622 SoC
-
-Remove superfluous pin setup to get out of accessing invalid I/O pin
-registers because the way for pin configuring tends to be different from
-various SoCs and thus it should be better being managed and controlled by
-the pinctrl driver which MT7622 already can support.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 +++++++++++++++++------------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 +++
- 2 files changed, 24 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1977,14 +1977,16 @@ static int mtk_hw_init(struct mtk_eth *e
- }
- regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
-
-- /* Set GE2 driving and slew rate */
-- regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
-+ if (eth->pctl) {
-+ /* Set GE2 driving and slew rate */
-+ regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
-
-- /* set GE2 TDSEL */
-- regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
-+ /* set GE2 TDSEL */
-+ regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
-
-- /* set GE2 TUNE */
-- regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
-+ /* set GE2 TUNE */
-+ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
-+ }
-
- /* Set linkdown as the default for each GMAC. Its own MCR would be set
- * up with the more appropriate value when mtk_phy_link_adjust call is
-@@ -2569,11 +2571,13 @@ static int mtk_probe(struct platform_dev
- }
- }
-
-- eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-- "mediatek,pctl");
-- if (IS_ERR(eth->pctl)) {
-- dev_err(&pdev->dev, "no pctl regmap found\n");
-- return PTR_ERR(eth->pctl);
-+ if (eth->soc->required_pctl) {
-+ eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+ "mediatek,pctl");
-+ if (IS_ERR(eth->pctl)) {
-+ dev_err(&pdev->dev, "no pctl regmap found\n");
-+ return PTR_ERR(eth->pctl);
-+ }
- }
-
- for (i = 0; i < 3; i++) {
-@@ -2699,17 +2703,20 @@ static int mtk_remove(struct platform_de
-
- static const struct mtk_soc_data mt2701_data = {
- .caps = MTK_GMAC1_TRGMII,
-- .required_clks = MT7623_CLKS_BITMAP
-+ .required_clks = MT7623_CLKS_BITMAP,
-+ .required_pctl = true,
- };
-
- static const struct mtk_soc_data mt7622_data = {
- .caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW,
-- .required_clks = MT7622_CLKS_BITMAP
-+ .required_clks = MT7622_CLKS_BITMAP,
-+ .required_pctl = false,
- };
-
- static const struct mtk_soc_data mt7623_data = {
- .caps = MTK_GMAC1_TRGMII,
-- .required_clks = MT7623_CLKS_BITMAP
-+ .required_clks = MT7623_CLKS_BITMAP,
-+ .required_pctl = true,
- };
-
- const struct of_device_id of_mtk_match[] = {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -574,10 +574,13 @@ struct mtk_rx_ring {
- * @caps Flags shown the extra capability for the SoC
- * @required_clks Flags shown the bitmap for required clocks on
- * the target SoC
-+ * @required_pctl A bool value to show whether the SoC requires
-+ * the extra setup for those pins used by GMAC.
- */
- struct mtk_soc_data {
- u32 caps;
- u32 required_clks;
-+ bool required_pctl;
- };
-
- /* currently no SoC has more than 2 macs */
diff --git a/target/linux/mediatek/patches-4.14/0176-clk-mediatek-Fix-all-warnings-for-missing-struct-clk.patch b/target/linux/mediatek/patches-4.14/0176-clk-mediatek-Fix-all-warnings-for-missing-struct-clk.patch
deleted file mode 100644
index ee196a73e9..0000000000
--- a/target/linux/mediatek/patches-4.14/0176-clk-mediatek-Fix-all-warnings-for-missing-struct-clk.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From f42f141077a12e28fe33c0033f698afb1402ec20 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 25 Dec 2017 16:03:57 +0800
-Subject: [PATCH 176/224] clk: mediatek: Fix all warnings for missing struct
- clk_onecell_data
-
-Even though the header file linux/clk-provider.h is already being properly
-included in clk-mtk.h, the definition of struct clk_onecell_data still
-must depend on CONFIG_COMMON_CLK defined and thus it's possible that
-below build warnings occur when CONFIG_COMMON_CLK is not being selected.
-
-Therefore, these functions which need struct clk_onecell_data without
-declaring that structure first requires simply declaring that this struct
-exists prior to referencing it in clk-mtk.h
-
-Changes from v1->v2:
-enhance v1 based on two useful solutions Jean Delvare kindly suggested.
-
-All warnings (new ones prefixed by >>):
-
-In file included from drivers/clk/mediatek/reset.c:22:0:
->>drivers/clk/mediatek/clk-mtk.h:44:19: warning: 'struct clk_onecell_data'
-declared inside parameter list will not be visible outside of
-this definition or declaration
- int num, struct clk_onecell_data *clk_data);
- ^~~~~~~~~~~~~~~~
-drivers/clk/mediatek/clk-mtk.h:63:19: warning: 'struct clk_onecell_data'
-declared inside parameter list will not be visible outside of
-this definition or declaration
- int num, struct clk_onecell_data *clk_data);
- ^~~~~~~~~~~~~~~~
-drivers/clk/mediatek/clk-mtk.h:145:10: warning: 'struct clk_onecell_data'
-declared inside parameter list will not be visible outside of
-this definition or declaration
- struct clk_onecell_data *clk_data);
- ^~~~~~~~~~~~~~~~
-drivers/clk/mediatek/clk-mtk.h:164:11: warning: 'struct clk_onecell_data'
-declared inside parameter list will not be visible outside of
-this definition or declaration
- struct clk_onecell_data *clk_data);
- ^~~~~~~~~~~~~~~~
-drivers/clk/mediatek/clk-mtk.h:190:12: warning: 'struct clk_onecell_data'
-declared inside parameter list will not be visible outside of this
-definition or declaration
- struct clk_onecell_data *clk_data);
- ^~~~~~~~~~~~~~~~
-
-Reported-by: kbuild test robot <fengguang.wu@intel.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: kbuild-all@01.org
-Cc: Stephen Boyd <sboyd@codeaurora.org>
-Cc: Jean Delvare <jdelvare@suse.de>
-Cc: linux-clk@vger.kernel.org
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mediatek/clk-mtk.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -20,6 +20,7 @@
- #include <linux/clk-provider.h>
-
- struct clk;
-+struct clk_onecell_data;
-
- #define MAX_MUX_GATE_BIT 31
- #define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
diff --git a/target/linux/mediatek/patches-4.14/0178-phy-phy-mtk-tphy-make-shared-banks-optional-for-V1-T.patch b/target/linux/mediatek/patches-4.14/0178-phy-phy-mtk-tphy-make-shared-banks-optional-for-V1-T.patch
deleted file mode 100644
index 31e4ade08b..0000000000
--- a/target/linux/mediatek/patches-4.14/0178-phy-phy-mtk-tphy-make-shared-banks-optional-for-V1-T.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From d7a38584713b00cf9ae97aed89d5e8fb7e3c1bea Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Thu, 7 Dec 2017 19:53:35 +0800
-Subject: [PATCH 178/224] phy: phy-mtk-tphy: make shared banks optional for V1
- TPHY
-
-V1 TPHY for SATA doesn't have shared banks if it isn't shared
-with PCIe or USB, so make it optional.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/mediatek/phy-mtk-tphy.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/phy/mediatek/phy-mtk-tphy.c
-+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
-@@ -1023,9 +1023,10 @@ static int mtk_tphy_probe(struct platfor
- tphy->dev = dev;
- platform_set_drvdata(pdev, tphy);
-
-- if (tphy->pdata->version == MTK_PHY_V1) {
-+ sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ /* SATA phy of V1 needn't it if not shared with PCIe or USB */
-+ if (sif_res && tphy->pdata->version == MTK_PHY_V1) {
- /* get banks shared by multiple phys */
-- sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- tphy->sif_base = devm_ioremap_resource(dev, sif_res);
- if (IS_ERR(tphy->sif_base)) {
- dev_err(dev, "failed to remap sif regs\n");
diff --git a/target/linux/mediatek/patches-4.14/0179-phy-phy-mtk-tphy-use-of_device_get_match_data.patch b/target/linux/mediatek/patches-4.14/0179-phy-phy-mtk-tphy-use-of_device_get_match_data.patch
deleted file mode 100644
index db77ca299e..0000000000
--- a/target/linux/mediatek/patches-4.14/0179-phy-phy-mtk-tphy-use-of_device_get_match_data.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3e53007a55e70d5036a527900befecf9a6316d05 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Thu, 28 Dec 2017 16:40:36 +0530
-Subject: [PATCH 179/224] phy: phy-mtk-tphy: use of_device_get_match_data()
-
-reduce the boilerplate code to get the specific data
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/mediatek/phy-mtk-tphy.c | 11 +++++------
- 1 file changed, 5 insertions(+), 6 deletions(-)
-
---- a/drivers/phy/mediatek/phy-mtk-tphy.c
-+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
-@@ -20,6 +20,7 @@
- #include <linux/iopoll.h>
- #include <linux/module.h>
- #include <linux/of_address.h>
-+#include <linux/of_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
-
-@@ -995,7 +996,6 @@ MODULE_DEVICE_TABLE(of, mtk_tphy_id_tabl
-
- static int mtk_tphy_probe(struct platform_device *pdev)
- {
-- const struct of_device_id *match;
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct device_node *child_np;
-@@ -1005,15 +1005,14 @@ static int mtk_tphy_probe(struct platfor
- struct resource res;
- int port, retval;
-
-- match = of_match_node(mtk_tphy_id_table, pdev->dev.of_node);
-- if (!match)
-- return -EINVAL;
--
- tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
- if (!tphy)
- return -ENOMEM;
-
-- tphy->pdata = match->data;
-+ tphy->pdata = of_device_get_match_data(dev);
-+ if (!tphy->pdata)
-+ return -EINVAL;
-+
- tphy->nphys = of_get_child_count(np);
- tphy->phys = devm_kcalloc(dev, tphy->nphys,
- sizeof(*tphy->phys), GFP_KERNEL);
diff --git a/target/linux/mediatek/patches-4.14/0180-ASoC-mediatek-fix-error-handling-in-mt2701_afe_pcm_d.patch b/target/linux/mediatek/patches-4.14/0180-ASoC-mediatek-fix-error-handling-in-mt2701_afe_pcm_d.patch
deleted file mode 100644
index 358f3d3ab9..0000000000
--- a/target/linux/mediatek/patches-4.14/0180-ASoC-mediatek-fix-error-handling-in-mt2701_afe_pcm_d.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 17508c32dd65649d2617c1c52b32b02bdb54b793 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 2 Jan 2018 19:47:18 +0800
-Subject: [PATCH 180/224] ASoC: mediatek: fix error handling in
- mt2701_afe_pcm_dev_probe()
-
-Fix unbalanced error handling path which will get incorrect counts
-if probe failed. The .remove() should be adjusted accordingly.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Tested-by: Garlic Tseng <garlic.tseng@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 31 ++++++++++++++----------------
- 1 file changed, 14 insertions(+), 17 deletions(-)
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-@@ -1590,12 +1590,16 @@ static int mt2701_afe_pcm_dev_probe(stru
- }
-
- platform_set_drvdata(pdev, afe);
-- pm_runtime_enable(&pdev->dev);
-- if (!pm_runtime_enabled(&pdev->dev))
-- goto err_pm_disable;
-- pm_runtime_get_sync(&pdev->dev);
-
-- ret = snd_soc_register_platform(&pdev->dev, &mtk_afe_pcm_platform);
-+ pm_runtime_enable(dev);
-+ if (!pm_runtime_enabled(dev)) {
-+ ret = mt2701_afe_runtime_resume(dev);
-+ if (ret)
-+ goto err_pm_disable;
-+ }
-+ pm_runtime_get_sync(dev);
-+
-+ ret = snd_soc_register_platform(dev, &mtk_afe_pcm_platform);
- if (ret) {
- dev_warn(dev, "err_platform\n");
- goto err_platform;
-@@ -1610,35 +1614,28 @@ static int mt2701_afe_pcm_dev_probe(stru
- goto err_dai_component;
- }
-
-- mt2701_afe_runtime_resume(&pdev->dev);
--
- return 0;
-
- err_dai_component:
-- snd_soc_unregister_component(&pdev->dev);
--
-+ snd_soc_unregister_platform(dev);
- err_platform:
-- snd_soc_unregister_platform(&pdev->dev);
--
-+ pm_runtime_put_sync(dev);
- err_pm_disable:
-- pm_runtime_disable(&pdev->dev);
-+ pm_runtime_disable(dev);
-
- return ret;
- }
-
- static int mt2701_afe_pcm_dev_remove(struct platform_device *pdev)
- {
-- struct mtk_base_afe *afe = platform_get_drvdata(pdev);
--
-+ pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- mt2701_afe_runtime_suspend(&pdev->dev);
-- pm_runtime_put_sync(&pdev->dev);
-
- snd_soc_unregister_component(&pdev->dev);
- snd_soc_unregister_platform(&pdev->dev);
-- /* disable afe clock */
-- mt2701_afe_disable_clock(afe);
-+
- return 0;
- }
-
diff --git a/target/linux/mediatek/patches-4.14/0181-ASoC-mediatek-rework-clock-functions-for-MT2701.patch b/target/linux/mediatek/patches-4.14/0181-ASoC-mediatek-rework-clock-functions-for-MT2701.patch
deleted file mode 100644
index 59a98a6c80..0000000000
--- a/target/linux/mediatek/patches-4.14/0181-ASoC-mediatek-rework-clock-functions-for-MT2701.patch
+++ /dev/null
@@ -1,919 +0,0 @@
-From d038da516563d910dd39930777f431d4c65a56cd Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 2 Jan 2018 19:47:19 +0800
-Subject: [PATCH 181/224] ASoC: mediatek: rework clock functions for MT2701
-
-Reworks clock part to make it more reasonable. The current changes are:
-
-- Replace regmap operations by CCF APIs. Doing so, we just need to handle
- the element clocks and can also get accurate information via CCF.
-
-- Rename clocks to make them more generic so that the future revisions
- of the IP can adapt gracefully.
-
-- Regroup 'aud_clks[]' by usage - the basic needs and I2S parts:
-
- The new code just keep the common clocks in array and let SoC self decide
- I2S numbers - If future chips have different sets of channels we will
- add a little more abstract here.
-
- Moreover, this patch moves I2S clocks to the struct mt2701_i2s_data
- so that we can easily manage them when calls .prepare() and .shutdown().
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Tested-by: Garlic Tseng <garlic.tseng@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c | 518 +++++++---------------
- sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.h | 15 +-
- sound/soc/mediatek/mt2701/mt2701-afe-common.h | 64 +--
- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 45 +-
- 4 files changed, 200 insertions(+), 442 deletions(-)
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-@@ -21,442 +21,256 @@
- #include "mt2701-afe-common.h"
- #include "mt2701-afe-clock-ctrl.h"
-
--static const char *aud_clks[MT2701_CLOCK_NUM] = {
-- [MT2701_AUD_INFRA_SYS_AUDIO] = "infra_sys_audio_clk",
-- [MT2701_AUD_AUD_MUX1_SEL] = "top_audio_mux1_sel",
-- [MT2701_AUD_AUD_MUX2_SEL] = "top_audio_mux2_sel",
-- [MT2701_AUD_AUD_MUX1_DIV] = "top_audio_mux1_div",
-- [MT2701_AUD_AUD_MUX2_DIV] = "top_audio_mux2_div",
-- [MT2701_AUD_AUD_48K_TIMING] = "top_audio_48k_timing",
-- [MT2701_AUD_AUD_44K_TIMING] = "top_audio_44k_timing",
-- [MT2701_AUD_AUDPLL_MUX_SEL] = "top_audpll_mux_sel",
-- [MT2701_AUD_APLL_SEL] = "top_apll_sel",
-- [MT2701_AUD_AUD1PLL_98M] = "top_aud1_pll_98M",
-- [MT2701_AUD_AUD2PLL_90M] = "top_aud2_pll_90M",
-- [MT2701_AUD_HADDS2PLL_98M] = "top_hadds2_pll_98M",
-- [MT2701_AUD_HADDS2PLL_294M] = "top_hadds2_pll_294M",
-- [MT2701_AUD_AUDPLL] = "top_audpll",
-- [MT2701_AUD_AUDPLL_D4] = "top_audpll_d4",
-- [MT2701_AUD_AUDPLL_D8] = "top_audpll_d8",
-- [MT2701_AUD_AUDPLL_D16] = "top_audpll_d16",
-- [MT2701_AUD_AUDPLL_D24] = "top_audpll_d24",
-- [MT2701_AUD_AUDINTBUS] = "top_audintbus_sel",
-- [MT2701_AUD_CLK_26M] = "clk_26m",
-- [MT2701_AUD_SYSPLL1_D4] = "top_syspll1_d4",
-- [MT2701_AUD_AUD_K1_SRC_SEL] = "top_aud_k1_src_sel",
-- [MT2701_AUD_AUD_K2_SRC_SEL] = "top_aud_k2_src_sel",
-- [MT2701_AUD_AUD_K3_SRC_SEL] = "top_aud_k3_src_sel",
-- [MT2701_AUD_AUD_K4_SRC_SEL] = "top_aud_k4_src_sel",
-- [MT2701_AUD_AUD_K5_SRC_SEL] = "top_aud_k5_src_sel",
-- [MT2701_AUD_AUD_K6_SRC_SEL] = "top_aud_k6_src_sel",
-- [MT2701_AUD_AUD_K1_SRC_DIV] = "top_aud_k1_src_div",
-- [MT2701_AUD_AUD_K2_SRC_DIV] = "top_aud_k2_src_div",
-- [MT2701_AUD_AUD_K3_SRC_DIV] = "top_aud_k3_src_div",
-- [MT2701_AUD_AUD_K4_SRC_DIV] = "top_aud_k4_src_div",
-- [MT2701_AUD_AUD_K5_SRC_DIV] = "top_aud_k5_src_div",
-- [MT2701_AUD_AUD_K6_SRC_DIV] = "top_aud_k6_src_div",
-- [MT2701_AUD_AUD_I2S1_MCLK] = "top_aud_i2s1_mclk",
-- [MT2701_AUD_AUD_I2S2_MCLK] = "top_aud_i2s2_mclk",
-- [MT2701_AUD_AUD_I2S3_MCLK] = "top_aud_i2s3_mclk",
-- [MT2701_AUD_AUD_I2S4_MCLK] = "top_aud_i2s4_mclk",
-- [MT2701_AUD_AUD_I2S5_MCLK] = "top_aud_i2s5_mclk",
-- [MT2701_AUD_AUD_I2S6_MCLK] = "top_aud_i2s6_mclk",
-- [MT2701_AUD_ASM_M_SEL] = "top_asm_m_sel",
-- [MT2701_AUD_ASM_H_SEL] = "top_asm_h_sel",
-- [MT2701_AUD_UNIVPLL2_D4] = "top_univpll2_d4",
-- [MT2701_AUD_UNIVPLL2_D2] = "top_univpll2_d2",
-- [MT2701_AUD_SYSPLL_D5] = "top_syspll_d5",
-+static const char *const base_clks[] = {
-+ [MT2701_TOP_AUD_MCLK_SRC0] = "top_audio_mux1_sel",
-+ [MT2701_TOP_AUD_MCLK_SRC1] = "top_audio_mux2_sel",
-+ [MT2701_AUDSYS_AFE] = "audio_afe_pd",
-+ [MT2701_AUDSYS_AFE_CONN] = "audio_afe_conn_pd",
-+ [MT2701_AUDSYS_A1SYS] = "audio_a1sys_pd",
-+ [MT2701_AUDSYS_A2SYS] = "audio_a2sys_pd",
- };
-
- int mt2701_init_clock(struct mtk_base_afe *afe)
- {
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-- int i = 0;
-+ int i;
-
-- for (i = 0; i < MT2701_CLOCK_NUM; i++) {
-- afe_priv->clocks[i] = devm_clk_get(afe->dev, aud_clks[i]);
-- if (IS_ERR(afe_priv->clocks[i])) {
-- dev_warn(afe->dev, "%s devm_clk_get %s fail\n",
-- __func__, aud_clks[i]);
-- return PTR_ERR(aud_clks[i]);
-+ for (i = 0; i < MT2701_BASE_CLK_NUM; i++) {
-+ afe_priv->base_ck[i] = devm_clk_get(afe->dev, base_clks[i]);
-+ if (IS_ERR(afe_priv->base_ck[i])) {
-+ dev_err(afe->dev, "failed to get %s\n", base_clks[i]);
-+ return PTR_ERR(afe_priv->base_ck[i]);
- }
- }
-
-- return 0;
--}
-+ /* Get I2S related clocks */
-+ for (i = 0; i < MT2701_I2S_NUM; i++) {
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[i];
-+ char name[13];
-+
-+ snprintf(name, sizeof(name), "i2s%d_src_sel", i);
-+ i2s_path->sel_ck = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->sel_ck)) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->sel_ck);
-+ }
-
--int mt2701_afe_enable_clock(struct mtk_base_afe *afe)
--{
-- int ret = 0;
-+ snprintf(name, sizeof(name), "i2s%d_src_div", i);
-+ i2s_path->div_ck = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->div_ck)) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->div_ck);
-+ }
-
-- ret = mt2701_turn_on_a1sys_clock(afe);
-- if (ret) {
-- dev_err(afe->dev, "%s turn_on_a1sys_clock fail %d\n",
-- __func__, ret);
-- return ret;
-- }
-+ snprintf(name, sizeof(name), "i2s%d_mclk_en", i);
-+ i2s_path->mclk_ck = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->mclk_ck)) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->mclk_ck);
-+ }
-
-- ret = mt2701_turn_on_a2sys_clock(afe);
-- if (ret) {
-- dev_err(afe->dev, "%s turn_on_a2sys_clock fail %d\n",
-- __func__, ret);
-- mt2701_turn_off_a1sys_clock(afe);
-- return ret;
-- }
-+ snprintf(name, sizeof(name), "i2so%d_hop_ck", i);
-+ i2s_path->hop_ck[I2S_OUT] = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->hop_ck[I2S_OUT])) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->hop_ck[I2S_OUT]);
-+ }
-
-- ret = mt2701_turn_on_afe_clock(afe);
-- if (ret) {
-- dev_err(afe->dev, "%s turn_on_afe_clock fail %d\n",
-- __func__, ret);
-- mt2701_turn_off_a1sys_clock(afe);
-- mt2701_turn_off_a2sys_clock(afe);
-- return ret;
-+ snprintf(name, sizeof(name), "i2si%d_hop_ck", i);
-+ i2s_path->hop_ck[I2S_IN] = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->hop_ck[I2S_IN])) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->hop_ck[I2S_IN]);
-+ }
-+
-+ snprintf(name, sizeof(name), "asrc%d_out_ck", i);
-+ i2s_path->asrco_ck = devm_clk_get(afe->dev, name);
-+ if (IS_ERR(i2s_path->asrco_ck)) {
-+ dev_err(afe->dev, "failed to get %s\n", name);
-+ return PTR_ERR(i2s_path->asrco_ck);
-+ }
- }
-
-- regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON);
-- regmap_update_bits(afe->regmap, AFE_DAC_CON0,
-- AFE_DAC_CON0_AFE_ON,
-- AFE_DAC_CON0_AFE_ON);
-- regmap_write(afe->regmap, PWR2_TOP_CON,
-- PWR2_TOP_CON_INIT_VAL);
-- regmap_write(afe->regmap, PWR1_ASM_CON1,
-- PWR1_ASM_CON1_INIT_VAL);
-- regmap_write(afe->regmap, PWR2_ASM_CON1,
-- PWR2_ASM_CON1_INIT_VAL);
-+ /* Some platforms may support BT path */
-+ afe_priv->mrgif_ck = devm_clk_get(afe->dev, "audio_mrgif_pd");
-+ if (IS_ERR(afe_priv->mrgif_ck)) {
-+ if (PTR_ERR(afe_priv->mrgif_ck) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-
-- return 0;
--}
-+ afe_priv->mrgif_ck = NULL;
-+ }
-
--void mt2701_afe_disable_clock(struct mtk_base_afe *afe)
--{
-- mt2701_turn_off_afe_clock(afe);
-- mt2701_turn_off_a1sys_clock(afe);
-- mt2701_turn_off_a2sys_clock(afe);
-- regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON, 0);
-- regmap_update_bits(afe->regmap, AFE_DAC_CON0,
-- AFE_DAC_CON0_AFE_ON, 0);
-+ return 0;
- }
-
--int mt2701_turn_on_a1sys_clock(struct mtk_base_afe *afe)
-+int mt2701_afe_enable_i2s(struct mtk_base_afe *afe, int id, int dir)
- {
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-- int ret = 0;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[id];
-+ int ret;
-
-- /* Set Mux */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_MUX1_SEL]);
-+ ret = clk_prepare_enable(i2s_path->asrco_ck);
- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUD_MUX1_SEL], ret);
-- goto A1SYS_CLK_AUD_MUX1_SEL_ERR;
-+ dev_err(afe->dev, "failed to enable ASRC clock %d\n", ret);
-+ return ret;
- }
-
-- ret = clk_set_parent(afe_priv->clocks[MT2701_AUD_AUD_MUX1_SEL],
-- afe_priv->clocks[MT2701_AUD_AUD1PLL_98M]);
-+ ret = clk_prepare_enable(i2s_path->hop_ck[dir]);
- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", __func__,
-- aud_clks[MT2701_AUD_AUD_MUX1_SEL],
-- aud_clks[MT2701_AUD_AUD1PLL_98M], ret);
-- goto A1SYS_CLK_AUD_MUX1_SEL_ERR;
-+ dev_err(afe->dev, "failed to enable I2S clock %d\n", ret);
-+ goto err_hop_ck;
- }
-
-- /* Set Divider */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_MUX1_DIV]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__,
-- aud_clks[MT2701_AUD_AUD_MUX1_DIV],
-- ret);
-- goto A1SYS_CLK_AUD_MUX1_DIV_ERR;
-- }
-+ return 0;
-
-- ret = clk_set_rate(afe_priv->clocks[MT2701_AUD_AUD_MUX1_DIV],
-- MT2701_AUD_AUD_MUX1_DIV_RATE);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%d fail %d\n", __func__,
-- aud_clks[MT2701_AUD_AUD_MUX1_DIV],
-- MT2701_AUD_AUD_MUX1_DIV_RATE, ret);
-- goto A1SYS_CLK_AUD_MUX1_DIV_ERR;
-- }
-+err_hop_ck:
-+ clk_disable_unprepare(i2s_path->asrco_ck);
-
-- /* Enable clock gate */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_48K_TIMING]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUD_48K_TIMING], ret);
-- goto A1SYS_CLK_AUD_48K_ERR;
-- }
-+ return ret;
-+}
-
-- /* Enable infra audio */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_INFRA_SYS_AUDIO], ret);
-- goto A1SYS_CLK_INFRA_ERR;
-- }
-+void mt2701_afe_disable_i2s(struct mtk_base_afe *afe, int id, int dir)
-+{
-+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[id];
-
-- return 0;
-+ clk_disable_unprepare(i2s_path->hop_ck[dir]);
-+ clk_disable_unprepare(i2s_path->asrco_ck);
-+}
-
--A1SYS_CLK_INFRA_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
--A1SYS_CLK_AUD_48K_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_48K_TIMING]);
--A1SYS_CLK_AUD_MUX1_DIV_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX1_DIV]);
--A1SYS_CLK_AUD_MUX1_SEL_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX1_SEL]);
-+int mt2701_afe_enable_mclk(struct mtk_base_afe *afe, int id)
-+{
-+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[id];
-
-- return ret;
-+ return clk_prepare_enable(i2s_path->mclk_ck);
- }
-
--void mt2701_turn_off_a1sys_clock(struct mtk_base_afe *afe)
-+void mt2701_afe_disable_mclk(struct mtk_base_afe *afe, int id)
- {
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[id];
-
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_48K_TIMING]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX1_DIV]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX1_SEL]);
-+ clk_disable_unprepare(i2s_path->mclk_ck);
- }
-
--int mt2701_turn_on_a2sys_clock(struct mtk_base_afe *afe)
-+int mt2701_enable_btmrg_clk(struct mtk_base_afe *afe)
- {
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-- int ret = 0;
-
-- /* Set Mux */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_MUX2_SEL]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUD_MUX2_SEL], ret);
-- goto A2SYS_CLK_AUD_MUX2_SEL_ERR;
-- }
-+ return clk_prepare_enable(afe_priv->mrgif_ck);
-+}
-
-- ret = clk_set_parent(afe_priv->clocks[MT2701_AUD_AUD_MUX2_SEL],
-- afe_priv->clocks[MT2701_AUD_AUD2PLL_90M]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", __func__,
-- aud_clks[MT2701_AUD_AUD_MUX2_SEL],
-- aud_clks[MT2701_AUD_AUD2PLL_90M], ret);
-- goto A2SYS_CLK_AUD_MUX2_SEL_ERR;
-- }
-+void mt2701_disable_btmrg_clk(struct mtk_base_afe *afe)
-+{
-+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
-
-- /* Set Divider */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_MUX2_DIV]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUD_MUX2_DIV], ret);
-- goto A2SYS_CLK_AUD_MUX2_DIV_ERR;
-- }
-+ clk_disable_unprepare(afe_priv->mrgif_ck);
-+}
-
-- ret = clk_set_rate(afe_priv->clocks[MT2701_AUD_AUD_MUX2_DIV],
-- MT2701_AUD_AUD_MUX2_DIV_RATE);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%d fail %d\n", __func__,
-- aud_clks[MT2701_AUD_AUD_MUX2_DIV],
-- MT2701_AUD_AUD_MUX2_DIV_RATE, ret);
-- goto A2SYS_CLK_AUD_MUX2_DIV_ERR;
-- }
-+static int mt2701_afe_enable_audsys(struct mtk_base_afe *afe)
-+{
-+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ int ret;
-
-- /* Enable clock gate */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUD_44K_TIMING]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUD_44K_TIMING], ret);
-- goto A2SYS_CLK_AUD_44K_ERR;
-- }
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-+ if (ret)
-+ return ret;
-
-- /* Enable infra audio */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_INFRA_SYS_AUDIO], ret);
-- goto A2SYS_CLK_INFRA_ERR;
-- }
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
-+ if (ret)
-+ goto err_audio_a1sys;
-+
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_A2SYS]);
-+ if (ret)
-+ goto err_audio_a2sys;
-+
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_AFE_CONN]);
-+ if (ret)
-+ goto err_afe_conn;
-
- return 0;
-
--A2SYS_CLK_INFRA_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
--A2SYS_CLK_AUD_44K_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_44K_TIMING]);
--A2SYS_CLK_AUD_MUX2_DIV_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX2_DIV]);
--A2SYS_CLK_AUD_MUX2_SEL_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX2_SEL]);
-+err_afe_conn:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A2SYS]);
-+err_audio_a2sys:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
-+err_audio_a1sys:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-
- return ret;
- }
-
--void mt2701_turn_off_a2sys_clock(struct mtk_base_afe *afe)
-+static void mt2701_afe_disable_audsys(struct mtk_base_afe *afe)
- {
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_44K_TIMING]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX2_DIV]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUD_MUX2_SEL]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_AFE_CONN]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A2SYS]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
- }
-
--int mt2701_turn_on_afe_clock(struct mtk_base_afe *afe)
-+int mt2701_afe_enable_clock(struct mtk_base_afe *afe)
- {
-- struct mt2701_afe_private *afe_priv = afe->platform_priv;
- int ret;
-
-- /* enable INFRA_SYS */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-+ /* Enable audio system */
-+ ret = mt2701_afe_enable_audsys(afe);
- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_INFRA_SYS_AUDIO], ret);
-- goto AFE_AUD_INFRA_ERR;
-- }
--
-- /* Set MT2701_AUD_AUDINTBUS to MT2701_AUD_SYSPLL1_D4 */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_AUDINTBUS]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_AUDINTBUS], ret);
-- goto AFE_AUD_AUDINTBUS_ERR;
-- }
--
-- ret = clk_set_parent(afe_priv->clocks[MT2701_AUD_AUDINTBUS],
-- afe_priv->clocks[MT2701_AUD_SYSPLL1_D4]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", __func__,
-- aud_clks[MT2701_AUD_AUDINTBUS],
-- aud_clks[MT2701_AUD_SYSPLL1_D4], ret);
-- goto AFE_AUD_AUDINTBUS_ERR;
-- }
--
-- /* Set MT2701_AUD_ASM_H_SEL to MT2701_AUD_UNIVPLL2_D2 */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_ASM_H_SEL]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_ASM_H_SEL], ret);
-- goto AFE_AUD_ASM_H_ERR;
-- }
--
-- ret = clk_set_parent(afe_priv->clocks[MT2701_AUD_ASM_H_SEL],
-- afe_priv->clocks[MT2701_AUD_UNIVPLL2_D2]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", __func__,
-- aud_clks[MT2701_AUD_ASM_H_SEL],
-- aud_clks[MT2701_AUD_UNIVPLL2_D2], ret);
-- goto AFE_AUD_ASM_H_ERR;
-- }
--
-- /* Set MT2701_AUD_ASM_M_SEL to MT2701_AUD_UNIVPLL2_D4 */
-- ret = clk_prepare_enable(afe_priv->clocks[MT2701_AUD_ASM_M_SEL]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[MT2701_AUD_ASM_M_SEL], ret);
-- goto AFE_AUD_ASM_M_ERR;
-+ dev_err(afe->dev, "failed to enable audio system %d\n", ret);
-+ return ret;
- }
-
-- ret = clk_set_parent(afe_priv->clocks[MT2701_AUD_ASM_M_SEL],
-- afe_priv->clocks[MT2701_AUD_UNIVPLL2_D4]);
-- if (ret) {
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", __func__,
-- aud_clks[MT2701_AUD_ASM_M_SEL],
-- aud_clks[MT2701_AUD_UNIVPLL2_D4], ret);
-- goto AFE_AUD_ASM_M_ERR;
-- }
-+ regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-+ AUDIO_TOP_CON0_A1SYS_A2SYS_ON,
-+ AUDIO_TOP_CON0_A1SYS_A2SYS_ON);
-+ regmap_update_bits(afe->regmap, AFE_DAC_CON0,
-+ AFE_DAC_CON0_AFE_ON,
-+ AFE_DAC_CON0_AFE_ON);
-
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
-- AUDIO_TOP_CON0_PDN_AFE, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
-- AUDIO_TOP_CON0_PDN_APLL_CK, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_A1SYS, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_A2SYS, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_AFE_CONN, 0);
-+ /* Configure ASRC */
-+ regmap_write(afe->regmap, PWR1_ASM_CON1, PWR1_ASM_CON1_INIT_VAL);
-+ regmap_write(afe->regmap, PWR2_ASM_CON1, PWR2_ASM_CON1_INIT_VAL);
-
- return 0;
--
--AFE_AUD_ASM_M_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_ASM_M_SEL]);
--AFE_AUD_ASM_H_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_ASM_H_SEL]);
--AFE_AUD_AUDINTBUS_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUDINTBUS]);
--AFE_AUD_INFRA_ERR:
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
--
-- return ret;
- }
-
--void mt2701_turn_off_afe_clock(struct mtk_base_afe *afe)
-+int mt2701_afe_disable_clock(struct mtk_base_afe *afe)
- {
-- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-+ AUDIO_TOP_CON0_A1SYS_A2SYS_ON, 0);
-+ regmap_update_bits(afe->regmap, AFE_DAC_CON0,
-+ AFE_DAC_CON0_AFE_ON, 0);
-
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_INFRA_SYS_AUDIO]);
-+ mt2701_afe_disable_audsys(afe);
-
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_AUDINTBUS]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_ASM_H_SEL]);
-- clk_disable_unprepare(afe_priv->clocks[MT2701_AUD_ASM_M_SEL]);
--
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
-- AUDIO_TOP_CON0_PDN_AFE, AUDIO_TOP_CON0_PDN_AFE);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
-- AUDIO_TOP_CON0_PDN_APLL_CK,
-- AUDIO_TOP_CON0_PDN_APLL_CK);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_A1SYS,
-- AUDIO_TOP_CON4_PDN_A1SYS);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_A2SYS,
-- AUDIO_TOP_CON4_PDN_A2SYS);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_AFE_CONN,
-- AUDIO_TOP_CON4_PDN_AFE_CONN);
-+ return 0;
- }
-
- void mt2701_mclk_configuration(struct mtk_base_afe *afe, int id, int domain,
- int mclk)
- {
-- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ struct mt2701_afe_private *priv = afe->platform_priv;
-+ struct mt2701_i2s_path *i2s_path = &priv->i2s_path[id];
- int ret;
-- int aud_src_div_id = MT2701_AUD_AUD_K1_SRC_DIV + id;
-- int aud_src_clk_id = MT2701_AUD_AUD_K1_SRC_SEL + id;
-
-- /* Set MCLK Kx_SRC_SEL(domain) */
-- ret = clk_prepare_enable(afe_priv->clocks[aud_src_clk_id]);
-- if (ret)
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[aud_src_clk_id], ret);
--
-- if (domain == 0) {
-- ret = clk_set_parent(afe_priv->clocks[aud_src_clk_id],
-- afe_priv->clocks[MT2701_AUD_AUD_MUX1_SEL]);
-- if (ret)
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n",
-- __func__, aud_clks[aud_src_clk_id],
-- aud_clks[MT2701_AUD_AUD_MUX1_SEL], ret);
-- } else {
-- ret = clk_set_parent(afe_priv->clocks[aud_src_clk_id],
-- afe_priv->clocks[MT2701_AUD_AUD_MUX2_SEL]);
-- if (ret)
-- dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n",
-- __func__, aud_clks[aud_src_clk_id],
-- aud_clks[MT2701_AUD_AUD_MUX2_SEL], ret);
-- }
-- clk_disable_unprepare(afe_priv->clocks[aud_src_clk_id]);
-+ /* Set mclk source */
-+ if (domain == 0)
-+ ret = clk_set_parent(i2s_path->sel_ck,
-+ priv->base_ck[MT2701_TOP_AUD_MCLK_SRC0]);
-+ else
-+ ret = clk_set_parent(i2s_path->sel_ck,
-+ priv->base_ck[MT2701_TOP_AUD_MCLK_SRC1]);
-
-- /* Set MCLK Kx_SRC_DIV(divider) */
-- ret = clk_prepare_enable(afe_priv->clocks[aud_src_div_id]);
- if (ret)
-- dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n",
-- __func__, aud_clks[aud_src_div_id], ret);
-+ dev_err(afe->dev, "failed to set domain%d mclk source %d\n",
-+ domain, ret);
-
-- ret = clk_set_rate(afe_priv->clocks[aud_src_div_id], mclk);
-+ /* Set mclk divider */
-+ ret = clk_set_rate(i2s_path->div_ck, mclk);
- if (ret)
-- dev_err(afe->dev, "%s clk_set_rate %s-%d fail %d\n", __func__,
-- aud_clks[aud_src_div_id], mclk, ret);
-- clk_disable_unprepare(afe_priv->clocks[aud_src_div_id]);
-+ dev_err(afe->dev, "failed to set mclk divider %d\n", ret);
- }
-
- MODULE_DESCRIPTION("MT2701 afe clock control");
---- a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.h
-@@ -21,16 +21,15 @@ struct mtk_base_afe;
-
- int mt2701_init_clock(struct mtk_base_afe *afe);
- int mt2701_afe_enable_clock(struct mtk_base_afe *afe);
--void mt2701_afe_disable_clock(struct mtk_base_afe *afe);
-+int mt2701_afe_disable_clock(struct mtk_base_afe *afe);
-
--int mt2701_turn_on_a1sys_clock(struct mtk_base_afe *afe);
--void mt2701_turn_off_a1sys_clock(struct mtk_base_afe *afe);
-+int mt2701_afe_enable_i2s(struct mtk_base_afe *afe, int id, int dir);
-+void mt2701_afe_disable_i2s(struct mtk_base_afe *afe, int id, int dir);
-+int mt2701_afe_enable_mclk(struct mtk_base_afe *afe, int id);
-+void mt2701_afe_disable_mclk(struct mtk_base_afe *afe, int id);
-
--int mt2701_turn_on_a2sys_clock(struct mtk_base_afe *afe);
--void mt2701_turn_off_a2sys_clock(struct mtk_base_afe *afe);
--
--int mt2701_turn_on_afe_clock(struct mtk_base_afe *afe);
--void mt2701_turn_off_afe_clock(struct mtk_base_afe *afe);
-+int mt2701_enable_btmrg_clk(struct mtk_base_afe *afe);
-+void mt2701_disable_btmrg_clk(struct mtk_base_afe *afe);
-
- void mt2701_mclk_configuration(struct mtk_base_afe *afe, int id, int domain,
- int mclk);
---- a/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-@@ -69,53 +69,14 @@ enum {
- MT2701_IRQ_ASYS_END,
- };
-
--/* 2701 clock def */
--enum audio_system_clock_type {
-- MT2701_AUD_INFRA_SYS_AUDIO,
-- MT2701_AUD_AUD_MUX1_SEL,
-- MT2701_AUD_AUD_MUX2_SEL,
-- MT2701_AUD_AUD_MUX1_DIV,
-- MT2701_AUD_AUD_MUX2_DIV,
-- MT2701_AUD_AUD_48K_TIMING,
-- MT2701_AUD_AUD_44K_TIMING,
-- MT2701_AUD_AUDPLL_MUX_SEL,
-- MT2701_AUD_APLL_SEL,
-- MT2701_AUD_AUD1PLL_98M,
-- MT2701_AUD_AUD2PLL_90M,
-- MT2701_AUD_HADDS2PLL_98M,
-- MT2701_AUD_HADDS2PLL_294M,
-- MT2701_AUD_AUDPLL,
-- MT2701_AUD_AUDPLL_D4,
-- MT2701_AUD_AUDPLL_D8,
-- MT2701_AUD_AUDPLL_D16,
-- MT2701_AUD_AUDPLL_D24,
-- MT2701_AUD_AUDINTBUS,
-- MT2701_AUD_CLK_26M,
-- MT2701_AUD_SYSPLL1_D4,
-- MT2701_AUD_AUD_K1_SRC_SEL,
-- MT2701_AUD_AUD_K2_SRC_SEL,
-- MT2701_AUD_AUD_K3_SRC_SEL,
-- MT2701_AUD_AUD_K4_SRC_SEL,
-- MT2701_AUD_AUD_K5_SRC_SEL,
-- MT2701_AUD_AUD_K6_SRC_SEL,
-- MT2701_AUD_AUD_K1_SRC_DIV,
-- MT2701_AUD_AUD_K2_SRC_DIV,
-- MT2701_AUD_AUD_K3_SRC_DIV,
-- MT2701_AUD_AUD_K4_SRC_DIV,
-- MT2701_AUD_AUD_K5_SRC_DIV,
-- MT2701_AUD_AUD_K6_SRC_DIV,
-- MT2701_AUD_AUD_I2S1_MCLK,
-- MT2701_AUD_AUD_I2S2_MCLK,
-- MT2701_AUD_AUD_I2S3_MCLK,
-- MT2701_AUD_AUD_I2S4_MCLK,
-- MT2701_AUD_AUD_I2S5_MCLK,
-- MT2701_AUD_AUD_I2S6_MCLK,
-- MT2701_AUD_ASM_M_SEL,
-- MT2701_AUD_ASM_H_SEL,
-- MT2701_AUD_UNIVPLL2_D4,
-- MT2701_AUD_UNIVPLL2_D2,
-- MT2701_AUD_SYSPLL_D5,
-- MT2701_CLOCK_NUM
-+enum audio_base_clock {
-+ MT2701_TOP_AUD_MCLK_SRC0,
-+ MT2701_TOP_AUD_MCLK_SRC1,
-+ MT2701_AUDSYS_AFE,
-+ MT2701_AUDSYS_AFE_CONN,
-+ MT2701_AUDSYS_A1SYS,
-+ MT2701_AUDSYS_A2SYS,
-+ MT2701_BASE_CLK_NUM,
- };
-
- static const unsigned int mt2701_afe_backup_list[] = {
-@@ -144,7 +105,6 @@ struct mtk_base_irq_data;
-
- struct mt2701_i2s_data {
- int i2s_ctrl_reg;
-- int i2s_pwn_shift;
- int i2s_asrc_fs_shift;
- int i2s_asrc_fs_mask;
- };
-@@ -161,11 +121,17 @@ struct mt2701_i2s_path {
- int on[I2S_DIR_NUM];
- int occupied[I2S_DIR_NUM];
- const struct mt2701_i2s_data *i2s_data[2];
-+ struct clk *hop_ck[I2S_DIR_NUM];
-+ struct clk *sel_ck;
-+ struct clk *div_ck;
-+ struct clk *mclk_ck;
-+ struct clk *asrco_ck;
- };
-
- struct mt2701_afe_private {
-- struct clk *clocks[MT2701_CLOCK_NUM];
- struct mt2701_i2s_path i2s_path[MT2701_I2S_NUM];
-+ struct clk *base_ck[MT2701_BASE_CLK_NUM];
-+ struct clk *mrgif_ck;
- bool mrg_enable[MT2701_STREAM_DIR_NUM];
- };
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-@@ -97,21 +97,12 @@ static int mt2701_afe_i2s_startup(struct
- {
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct mtk_base_afe *afe = snd_soc_platform_get_drvdata(rtd->platform);
-- struct mt2701_afe_private *afe_priv = afe->platform_priv;
- int i2s_num = mt2701_dai_num_to_i2s(afe, dai->id);
-- int clk_num = MT2701_AUD_AUD_I2S1_MCLK + i2s_num;
-- int ret = 0;
-
- if (i2s_num < 0)
- return i2s_num;
-
-- /* enable mclk */
-- ret = clk_prepare_enable(afe_priv->clocks[clk_num]);
-- if (ret)
-- dev_err(afe->dev, "Failed to enable mclk for I2S: %d\n",
-- i2s_num);
--
-- return ret;
-+ return mt2701_afe_enable_mclk(afe, i2s_num);
- }
-
- static int mt2701_afe_i2s_path_shutdown(struct snd_pcm_substream *substream,
-@@ -151,9 +142,9 @@ static int mt2701_afe_i2s_path_shutdown(
- /* disable i2s */
- regmap_update_bits(afe->regmap, i2s_data->i2s_ctrl_reg,
- ASYS_I2S_CON_I2S_EN, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- 1 << i2s_data->i2s_pwn_shift,
-- 1 << i2s_data->i2s_pwn_shift);
-+
-+ mt2701_afe_disable_i2s(afe, i2s_num, stream_dir);
-+
- return 0;
- }
-
-@@ -165,7 +156,6 @@ static void mt2701_afe_i2s_shutdown(stru
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
- int i2s_num = mt2701_dai_num_to_i2s(afe, dai->id);
- struct mt2701_i2s_path *i2s_path;
-- int clk_num = MT2701_AUD_AUD_I2S1_MCLK + i2s_num;
-
- if (i2s_num < 0)
- return;
-@@ -185,7 +175,7 @@ static void mt2701_afe_i2s_shutdown(stru
-
- I2S_UNSTART:
- /* disable mclk */
-- clk_disable_unprepare(afe_priv->clocks[clk_num]);
-+ mt2701_afe_disable_mclk(afe, i2s_num);
- }
-
- static int mt2701_i2s_path_prepare_enable(struct snd_pcm_substream *substream,
-@@ -251,9 +241,7 @@ static int mt2701_i2s_path_prepare_enabl
- fs << i2s_data->i2s_asrc_fs_shift);
-
- /* enable i2s */
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- 1 << i2s_data->i2s_pwn_shift,
-- 0 << i2s_data->i2s_pwn_shift);
-+ mt2701_afe_enable_i2s(afe, i2s_num, stream_dir);
-
- /* reset i2s hw status before enable */
- regmap_update_bits(afe->regmap, i2s_data->i2s_ctrl_reg,
-@@ -339,9 +327,11 @@ static int mt2701_btmrg_startup(struct s
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct mtk_base_afe *afe = snd_soc_platform_get_drvdata(rtd->platform);
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-+ int ret;
-
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_MRGIF, 0);
-+ ret = mt2701_enable_btmrg_clk(afe);
-+ if (ret)
-+ return ret;
-
- afe_priv->mrg_enable[substream->stream] = 1;
- return 0;
-@@ -406,9 +396,7 @@ static void mt2701_btmrg_shutdown(struct
- AFE_MRGIF_CON_MRG_EN, 0);
- regmap_update_bits(afe->regmap, AFE_MRGIF_CON,
- AFE_MRGIF_CON_MRG_I2S_EN, 0);
-- regmap_update_bits(afe->regmap, AUDIO_TOP_CON4,
-- AUDIO_TOP_CON4_PDN_MRGIF,
-- AUDIO_TOP_CON4_PDN_MRGIF);
-+ mt2701_disable_btmrg_clk(afe);
- }
- afe_priv->mrg_enable[substream->stream] = 0;
- }
-@@ -1386,14 +1374,12 @@ static const struct mt2701_i2s_data mt27
- {
- {
- .i2s_ctrl_reg = ASYS_I2SO1_CON,
-- .i2s_pwn_shift = 6,
- .i2s_asrc_fs_shift = 0,
- .i2s_asrc_fs_mask = 0x1f,
-
- },
- {
- .i2s_ctrl_reg = ASYS_I2SIN1_CON,
-- .i2s_pwn_shift = 0,
- .i2s_asrc_fs_shift = 0,
- .i2s_asrc_fs_mask = 0x1f,
-
-@@ -1402,14 +1388,12 @@ static const struct mt2701_i2s_data mt27
- {
- {
- .i2s_ctrl_reg = ASYS_I2SO2_CON,
-- .i2s_pwn_shift = 7,
- .i2s_asrc_fs_shift = 5,
- .i2s_asrc_fs_mask = 0x1f,
-
- },
- {
- .i2s_ctrl_reg = ASYS_I2SIN2_CON,
-- .i2s_pwn_shift = 1,
- .i2s_asrc_fs_shift = 5,
- .i2s_asrc_fs_mask = 0x1f,
-
-@@ -1418,14 +1402,12 @@ static const struct mt2701_i2s_data mt27
- {
- {
- .i2s_ctrl_reg = ASYS_I2SO3_CON,
-- .i2s_pwn_shift = 8,
- .i2s_asrc_fs_shift = 10,
- .i2s_asrc_fs_mask = 0x1f,
-
- },
- {
- .i2s_ctrl_reg = ASYS_I2SIN3_CON,
-- .i2s_pwn_shift = 2,
- .i2s_asrc_fs_shift = 10,
- .i2s_asrc_fs_mask = 0x1f,
-
-@@ -1434,14 +1416,12 @@ static const struct mt2701_i2s_data mt27
- {
- {
- .i2s_ctrl_reg = ASYS_I2SO4_CON,
-- .i2s_pwn_shift = 9,
- .i2s_asrc_fs_shift = 15,
- .i2s_asrc_fs_mask = 0x1f,
-
- },
- {
- .i2s_ctrl_reg = ASYS_I2SIN4_CON,
-- .i2s_pwn_shift = 3,
- .i2s_asrc_fs_shift = 15,
- .i2s_asrc_fs_mask = 0x1f,
-
-@@ -1483,8 +1463,7 @@ static int mt2701_afe_runtime_suspend(st
- {
- struct mtk_base_afe *afe = dev_get_drvdata(dev);
-
-- mt2701_afe_disable_clock(afe);
-- return 0;
-+ return mt2701_afe_disable_clock(afe);
- }
-
- static int mt2701_afe_runtime_resume(struct device *dev)
diff --git a/target/linux/mediatek/patches-4.14/0182-ASoC-mediatek-cleanup-audio-driver-for-MT2701.patch b/target/linux/mediatek/patches-4.14/0182-ASoC-mediatek-cleanup-audio-driver-for-MT2701.patch
deleted file mode 100644
index afd535c696..0000000000
--- a/target/linux/mediatek/patches-4.14/0182-ASoC-mediatek-cleanup-audio-driver-for-MT2701.patch
+++ /dev/null
@@ -1,428 +0,0 @@
-From 4087c924ec899881951b2170a7bb8888747ec532 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 2 Jan 2018 19:47:20 +0800
-Subject: [PATCH 182/224] ASoC: mediatek: cleanup audio driver for MT2701
-
-Cleanup unused code such as 'i2s_num' guard, headers, indentation
-and some defines.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c | 14 +---
- sound/soc/mediatek/mt2701/mt2701-afe-common.h | 20 +----
- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 94 ++++-------------------
- sound/soc/mediatek/mt2701/mt2701-reg.h | 41 +---------
- 4 files changed, 24 insertions(+), 145 deletions(-)
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-@@ -14,10 +14,6 @@
- * GNU General Public License for more details.
- */
-
--#include <sound/soc.h>
--#include <linux/regmap.h>
--#include <linux/pm_runtime.h>
--
- #include "mt2701-afe-common.h"
- #include "mt2701-afe-clock-ctrl.h"
-
-@@ -223,8 +219,8 @@ int mt2701_afe_enable_clock(struct mtk_b
- }
-
- regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON);
-+ ASYS_TOP_CON_ASYS_TIMING_ON,
-+ ASYS_TOP_CON_ASYS_TIMING_ON);
- regmap_update_bits(afe->regmap, AFE_DAC_CON0,
- AFE_DAC_CON0_AFE_ON,
- AFE_DAC_CON0_AFE_ON);
-@@ -239,7 +235,7 @@ int mt2701_afe_enable_clock(struct mtk_b
- int mt2701_afe_disable_clock(struct mtk_base_afe *afe)
- {
- regmap_update_bits(afe->regmap, ASYS_TOP_CON,
-- AUDIO_TOP_CON0_A1SYS_A2SYS_ON, 0);
-+ ASYS_TOP_CON_ASYS_TIMING_ON, 0);
- regmap_update_bits(afe->regmap, AFE_DAC_CON0,
- AFE_DAC_CON0_AFE_ON, 0);
-
-@@ -272,7 +268,3 @@ void mt2701_mclk_configuration(struct mt
- if (ret)
- dev_err(afe->dev, "failed to set mclk divider %d\n", ret);
- }
--
--MODULE_DESCRIPTION("MT2701 afe clock control");
--MODULE_AUTHOR("Garlic Tseng <garlic.tseng@mediatek.com>");
--MODULE_LICENSE("GPL v2");
---- a/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-@@ -16,6 +16,7 @@
-
- #ifndef _MT_2701_AFE_COMMON_H_
- #define _MT_2701_AFE_COMMON_H_
-+
- #include <sound/soc.h>
- #include <linux/clk.h>
- #include <linux/regmap.h>
-@@ -25,16 +26,7 @@
- #define MT2701_STREAM_DIR_NUM (SNDRV_PCM_STREAM_LAST + 1)
- #define MT2701_PLL_DOMAIN_0_RATE 98304000
- #define MT2701_PLL_DOMAIN_1_RATE 90316800
--#define MT2701_AUD_AUD_MUX1_DIV_RATE (MT2701_PLL_DOMAIN_0_RATE / 2)
--#define MT2701_AUD_AUD_MUX2_DIV_RATE (MT2701_PLL_DOMAIN_1_RATE / 2)
--
--enum {
-- MT2701_I2S_1,
-- MT2701_I2S_2,
-- MT2701_I2S_3,
-- MT2701_I2S_4,
-- MT2701_I2S_NUM,
--};
-+#define MT2701_I2S_NUM 4
-
- enum {
- MT2701_MEMIF_DL1,
-@@ -62,8 +54,7 @@ enum {
- };
-
- enum {
-- MT2701_IRQ_ASYS_START,
-- MT2701_IRQ_ASYS_IRQ1 = MT2701_IRQ_ASYS_START,
-+ MT2701_IRQ_ASYS_IRQ1,
- MT2701_IRQ_ASYS_IRQ2,
- MT2701_IRQ_ASYS_IRQ3,
- MT2701_IRQ_ASYS_END,
-@@ -100,9 +91,6 @@ static const unsigned int mt2701_afe_bac
- AFE_MEMIF_PBUF_SIZE,
- };
-
--struct snd_pcm_substream;
--struct mtk_base_irq_data;
--
- struct mt2701_i2s_data {
- int i2s_ctrl_reg;
- int i2s_asrc_fs_shift;
-@@ -120,7 +108,7 @@ struct mt2701_i2s_path {
- int mclk_rate;
- int on[I2S_DIR_NUM];
- int occupied[I2S_DIR_NUM];
-- const struct mt2701_i2s_data *i2s_data[2];
-+ const struct mt2701_i2s_data *i2s_data[I2S_DIR_NUM];
- struct clk *hop_ck[I2S_DIR_NUM];
- struct clk *sel_ck;
- struct clk *div_ck;
---- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-@@ -20,16 +20,12 @@
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/pm_runtime.h>
--#include <sound/soc.h>
-
- #include "mt2701-afe-common.h"
--
- #include "mt2701-afe-clock-ctrl.h"
- #include "../common/mtk-afe-platform-driver.h"
- #include "../common/mtk-afe-fe-dai.h"
-
--#define AFE_IRQ_STATUS_BITS 0xff
--
- static const struct snd_pcm_hardware mt2701_afe_hardware = {
- .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED
- | SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID,
-@@ -107,21 +103,16 @@ static int mt2701_afe_i2s_startup(struct
-
- static int mt2701_afe_i2s_path_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai,
-+ int i2s_num,
- int dir_invert)
- {
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct mtk_base_afe *afe = snd_soc_platform_get_drvdata(rtd->platform);
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-- int i2s_num = mt2701_dai_num_to_i2s(afe, dai->id);
-- struct mt2701_i2s_path *i2s_path;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[i2s_num];
- const struct mt2701_i2s_data *i2s_data;
- int stream_dir = substream->stream;
-
-- if (i2s_num < 0)
-- return i2s_num;
--
-- i2s_path = &afe_priv->i2s_path[i2s_num];
--
- if (dir_invert) {
- if (stream_dir == SNDRV_PCM_STREAM_PLAYBACK)
- stream_dir = SNDRV_PCM_STREAM_CAPTURE;
-@@ -167,11 +158,11 @@ static void mt2701_afe_i2s_shutdown(stru
- else
- goto I2S_UNSTART;
-
-- mt2701_afe_i2s_path_shutdown(substream, dai, 0);
-+ mt2701_afe_i2s_path_shutdown(substream, dai, i2s_num, 0);
-
- /* need to disable i2s-out path when disable i2s-in */
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-- mt2701_afe_i2s_path_shutdown(substream, dai, 1);
-+ mt2701_afe_i2s_path_shutdown(substream, dai, i2s_num, 1);
-
- I2S_UNSTART:
- /* disable mclk */
-@@ -180,24 +171,19 @@ I2S_UNSTART:
-
- static int mt2701_i2s_path_prepare_enable(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai,
-+ int i2s_num,
- int dir_invert)
- {
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct mtk_base_afe *afe = snd_soc_platform_get_drvdata(rtd->platform);
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
-- int i2s_num = mt2701_dai_num_to_i2s(afe, dai->id);
-- struct mt2701_i2s_path *i2s_path;
-+ struct mt2701_i2s_path *i2s_path = &afe_priv->i2s_path[i2s_num];
- const struct mt2701_i2s_data *i2s_data;
- struct snd_pcm_runtime * const runtime = substream->runtime;
- int reg, fs, w_len = 1; /* now we support bck 64bits only */
- int stream_dir = substream->stream;
- unsigned int mask = 0, val = 0;
-
-- if (i2s_num < 0)
-- return i2s_num;
--
-- i2s_path = &afe_priv->i2s_path[i2s_num];
--
- if (dir_invert) {
- if (stream_dir == SNDRV_PCM_STREAM_PLAYBACK)
- stream_dir = SNDRV_PCM_STREAM_CAPTURE;
-@@ -288,13 +274,13 @@ static int mt2701_afe_i2s_prepare(struct
- mt2701_mclk_configuration(afe, i2s_num, clk_domain, mclk_rate);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-- mt2701_i2s_path_prepare_enable(substream, dai, 0);
-+ mt2701_i2s_path_prepare_enable(substream, dai, i2s_num, 0);
- } else {
- /* need to enable i2s-out path when enable i2s-in */
- /* prepare for another direction "out" */
-- mt2701_i2s_path_prepare_enable(substream, dai, 1);
-+ mt2701_i2s_path_prepare_enable(substream, dai, i2s_num, 1);
- /* prepare for "in" */
-- mt2701_i2s_path_prepare_enable(substream, dai, 0);
-+ mt2701_i2s_path_prepare_enable(substream, dai, i2s_num, 0);
- }
-
- return 0;
-@@ -562,7 +548,6 @@ static const struct snd_soc_dai_ops mt27
- .hw_free = mtk_afe_fe_hw_free,
- .prepare = mtk_afe_fe_prepare,
- .trigger = mtk_afe_fe_trigger,
--
- };
-
- static const struct snd_soc_dai_ops mt2701_dlm_memif_dai_ops = {
-@@ -903,31 +888,6 @@ static const struct snd_kcontrol_new mt2
- PWR2_TOP_CON, 19, 1, 0),
- };
-
--static const struct snd_kcontrol_new mt2701_afe_multi_ch_out_asrc0[] = {
-- SOC_DAPM_SINGLE_AUTODISABLE("Asrc0 out Switch", AUDIO_TOP_CON4, 14, 1,
-- 1),
--};
--
--static const struct snd_kcontrol_new mt2701_afe_multi_ch_out_asrc1[] = {
-- SOC_DAPM_SINGLE_AUTODISABLE("Asrc1 out Switch", AUDIO_TOP_CON4, 15, 1,
-- 1),
--};
--
--static const struct snd_kcontrol_new mt2701_afe_multi_ch_out_asrc2[] = {
-- SOC_DAPM_SINGLE_AUTODISABLE("Asrc2 out Switch", PWR2_TOP_CON, 6, 1,
-- 1),
--};
--
--static const struct snd_kcontrol_new mt2701_afe_multi_ch_out_asrc3[] = {
-- SOC_DAPM_SINGLE_AUTODISABLE("Asrc3 out Switch", PWR2_TOP_CON, 7, 1,
-- 1),
--};
--
--static const struct snd_kcontrol_new mt2701_afe_multi_ch_out_asrc4[] = {
-- SOC_DAPM_SINGLE_AUTODISABLE("Asrc4 out Switch", PWR2_TOP_CON, 8, 1,
-- 1),
--};
--
- static const struct snd_soc_dapm_widget mt2701_afe_pcm_widgets[] = {
- /* inter-connections */
- SND_SOC_DAPM_MIXER("I00", SND_SOC_NOPM, 0, 0, NULL, 0),
-@@ -987,19 +947,6 @@ static const struct snd_soc_dapm_widget
- SND_SOC_DAPM_MIXER("I18I19", SND_SOC_NOPM, 0, 0,
- mt2701_afe_multi_ch_out_i2s3,
- ARRAY_SIZE(mt2701_afe_multi_ch_out_i2s3)),
--
-- SND_SOC_DAPM_MIXER("ASRC_O0", SND_SOC_NOPM, 0, 0,
-- mt2701_afe_multi_ch_out_asrc0,
-- ARRAY_SIZE(mt2701_afe_multi_ch_out_asrc0)),
-- SND_SOC_DAPM_MIXER("ASRC_O1", SND_SOC_NOPM, 0, 0,
-- mt2701_afe_multi_ch_out_asrc1,
-- ARRAY_SIZE(mt2701_afe_multi_ch_out_asrc1)),
-- SND_SOC_DAPM_MIXER("ASRC_O2", SND_SOC_NOPM, 0, 0,
-- mt2701_afe_multi_ch_out_asrc2,
-- ARRAY_SIZE(mt2701_afe_multi_ch_out_asrc2)),
-- SND_SOC_DAPM_MIXER("ASRC_O3", SND_SOC_NOPM, 0, 0,
-- mt2701_afe_multi_ch_out_asrc3,
-- ARRAY_SIZE(mt2701_afe_multi_ch_out_asrc3)),
- };
-
- static const struct snd_soc_dapm_route mt2701_afe_pcm_routes[] = {
-@@ -1009,7 +956,6 @@ static const struct snd_soc_dapm_route m
-
- {"I2S0 Playback", NULL, "O15"},
- {"I2S0 Playback", NULL, "O16"},
--
- {"I2S1 Playback", NULL, "O17"},
- {"I2S1 Playback", NULL, "O18"},
- {"I2S2 Playback", NULL, "O19"},
-@@ -1026,7 +972,6 @@ static const struct snd_soc_dapm_route m
-
- {"I00", NULL, "I2S0 Capture"},
- {"I01", NULL, "I2S0 Capture"},
--
- {"I02", NULL, "I2S1 Capture"},
- {"I03", NULL, "I2S1 Capture"},
- /* I02,03 link to UL2, also need to open I2S0 */
-@@ -1034,15 +979,10 @@ static const struct snd_soc_dapm_route m
-
- {"I26", NULL, "BT Capture"},
-
-- {"ASRC_O0", "Asrc0 out Switch", "DLM"},
-- {"ASRC_O1", "Asrc1 out Switch", "DLM"},
-- {"ASRC_O2", "Asrc2 out Switch", "DLM"},
-- {"ASRC_O3", "Asrc3 out Switch", "DLM"},
--
-- {"I12I13", "Multich I2S0 Out Switch", "ASRC_O0"},
-- {"I14I15", "Multich I2S1 Out Switch", "ASRC_O1"},
-- {"I16I17", "Multich I2S2 Out Switch", "ASRC_O2"},
-- {"I18I19", "Multich I2S3 Out Switch", "ASRC_O3"},
-+ {"I12I13", "Multich I2S0 Out Switch", "DLM"},
-+ {"I14I15", "Multich I2S1 Out Switch", "DLM"},
-+ {"I16I17", "Multich I2S2 Out Switch", "DLM"},
-+ {"I18I19", "Multich I2S3 Out Switch", "DLM"},
-
- { "I12", NULL, "I12I13" },
- { "I13", NULL, "I12I13" },
-@@ -1067,7 +1007,6 @@ static const struct snd_soc_dapm_route m
- { "O21", "I18 Switch", "I18" },
- { "O22", "I19 Switch", "I19" },
- { "O31", "I35 Switch", "I35" },
--
- };
-
- static const struct snd_soc_component_driver mt2701_afe_pcm_dai_component = {
-@@ -1484,12 +1423,13 @@ static int mt2701_afe_pcm_dev_probe(stru
- afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL);
- if (!afe)
- return -ENOMEM;
-+
- afe->platform_priv = devm_kzalloc(&pdev->dev, sizeof(*afe_priv),
- GFP_KERNEL);
- if (!afe->platform_priv)
- return -ENOMEM;
-- afe_priv = afe->platform_priv;
-
-+ afe_priv = afe->platform_priv;
- afe->dev = &pdev->dev;
- dev = afe->dev;
-
-@@ -1524,7 +1464,6 @@ static int mt2701_afe_pcm_dev_probe(stru
- afe->memif_size = MT2701_MEMIF_NUM;
- afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif),
- GFP_KERNEL);
--
- if (!afe->memif)
- return -ENOMEM;
-
-@@ -1537,7 +1476,6 @@ static int mt2701_afe_pcm_dev_probe(stru
- afe->irqs_size = MT2701_IRQ_ASYS_END;
- afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs),
- GFP_KERNEL);
--
- if (!afe->irqs)
- return -ENOMEM;
-
-@@ -1555,7 +1493,6 @@ static int mt2701_afe_pcm_dev_probe(stru
- afe->mtk_afe_hardware = &mt2701_afe_hardware;
- afe->memif_fs = mt2701_memif_fs;
- afe->irq_fs = mt2701_irq_fs;
--
- afe->reg_back_up_list = mt2701_afe_backup_list;
- afe->reg_back_up_list_num = ARRAY_SIZE(mt2701_afe_backup_list);
- afe->runtime_resume = mt2701_afe_runtime_resume;
-@@ -1646,4 +1583,3 @@ module_platform_driver(mt2701_afe_pcm_dr
- MODULE_DESCRIPTION("Mediatek ALSA SoC AFE platform driver for 2701");
- MODULE_AUTHOR("Garlic Tseng <garlic.tseng@mediatek.com>");
- MODULE_LICENSE("GPL v2");
--
---- a/sound/soc/mediatek/mt2701/mt2701-reg.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-reg.h
-@@ -17,17 +17,6 @@
- #ifndef _MT2701_REG_H_
- #define _MT2701_REG_H_
-
--#include <linux/delay.h>
--#include <linux/module.h>
--#include <linux/of.h>
--#include <linux/of_address.h>
--#include <linux/pm_runtime.h>
--#include <sound/soc.h>
--#include "mt2701-afe-common.h"
--
--/*****************************************************************************
-- * R E G I S T E R D E F I N I T I O N
-- *****************************************************************************/
- #define AUDIO_TOP_CON0 0x0000
- #define AUDIO_TOP_CON4 0x0010
- #define AUDIO_TOP_CON5 0x0014
-@@ -109,18 +98,6 @@
- #define AFE_DAI_BASE 0x1370
- #define AFE_DAI_CUR 0x137c
-
--/* AUDIO_TOP_CON0 (0x0000) */
--#define AUDIO_TOP_CON0_A1SYS_A2SYS_ON (0x3 << 0)
--#define AUDIO_TOP_CON0_PDN_AFE (0x1 << 2)
--#define AUDIO_TOP_CON0_PDN_APLL_CK (0x1 << 23)
--
--/* AUDIO_TOP_CON4 (0x0010) */
--#define AUDIO_TOP_CON4_I2SO1_PWN (0x1 << 6)
--#define AUDIO_TOP_CON4_PDN_A1SYS (0x1 << 21)
--#define AUDIO_TOP_CON4_PDN_A2SYS (0x1 << 22)
--#define AUDIO_TOP_CON4_PDN_AFE_CONN (0x1 << 23)
--#define AUDIO_TOP_CON4_PDN_MRGIF (0x1 << 25)
--
- /* AFE_DAIBT_CON0 (0x001c) */
- #define AFE_DAIBT_CON0_DAIBT_EN (0x1 << 0)
- #define AFE_DAIBT_CON0_BT_FUNC_EN (0x1 << 1)
-@@ -137,22 +114,8 @@
- #define AFE_MRGIF_CON_I2S_MODE_MASK (0xf << 20)
- #define AFE_MRGIF_CON_I2S_MODE_32K (0x4 << 20)
-
--/* ASYS_I2SO1_CON (0x061c) */
--#define ASYS_I2SO1_CON_FS (0x1f << 8)
--#define ASYS_I2SO1_CON_FS_SET(x) ((x) << 8)
--#define ASYS_I2SO1_CON_MULTI_CH (0x1 << 16)
--#define ASYS_I2SO1_CON_SIDEGEN (0x1 << 30)
--#define ASYS_I2SO1_CON_I2S_EN (0x1 << 0)
--/* 0:EIAJ 1:I2S */
--#define ASYS_I2SO1_CON_I2S_MODE (0x1 << 3)
--#define ASYS_I2SO1_CON_WIDE_MODE (0x1 << 1)
--#define ASYS_I2SO1_CON_WIDE_MODE_SET(x) ((x) << 1)
--
--/* PWR2_TOP_CON (0x0634) */
--#define PWR2_TOP_CON_INIT_VAL (0xffe1ffff)
--
--/* ASYS_IRQ_CLR (0x07c0) */
--#define ASYS_IRQ_CLR_ALL (0xffffffff)
-+/* ASYS_TOP_CON (0x0600) */
-+#define ASYS_TOP_CON_ASYS_TIMING_ON (0x3 << 0)
-
- /* PWR2_ASM_CON1 (0x1070) */
- #define PWR2_ASM_CON1_INIT_VAL (0x492492)
diff --git a/target/linux/mediatek/patches-4.14/0183-ASoC-mediatek-update-clock-related-properties-of-MT2.patch b/target/linux/mediatek/patches-4.14/0183-ASoC-mediatek-update-clock-related-properties-of-MT2.patch
deleted file mode 100644
index cfb0e47e05..0000000000
--- a/target/linux/mediatek/patches-4.14/0183-ASoC-mediatek-update-clock-related-properties-of-MT2.patch
+++ /dev/null
@@ -1,258 +0,0 @@
-From d5b391bb7208c8a7b6b874c1357d3cd110537167 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 2 Jan 2018 19:47:21 +0800
-Subject: [PATCH 183/224] ASoC: mediatek: update clock related properties of
- MT2701 AFE
-
-Add 'assigned-clocks*' properties which are used to initialize default
-domain sources of audio system. we could configure different sets of
-input clocks through DTS now. Hence driver no longer cares about that.
-
-Also we change some 'clock-names' to make them more generic so that
-other chips can reuse gracefully.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../devicetree/bindings/sound/mt2701-afe-pcm.txt | 207 +++++++++------------
- 1 file changed, 91 insertions(+), 116 deletions(-)
-
---- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
-+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
-@@ -6,51 +6,44 @@ Required properties:
- - interrupts: should contain AFE and ASYS interrupts
- - interrupt-names: should be "afe" and "asys"
- - power-domains: should define the power domain
-+- clocks: Must contain an entry for each entry in clock-names
-+ See ../clocks/clock-bindings.txt for details
- - clock-names: should have these clock names:
-- "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
-- "top_audio_mux1_div",
-- "top_audio_mux2_div",
-- "top_audio_48k_timing",
-- "top_audio_44k_timing",
-- "top_audpll_mux_sel",
-- "top_apll_sel",
-- "top_aud1_pll_98M",
-- "top_aud2_pll_90M",
-- "top_hadds2_pll_98M",
-- "top_hadds2_pll_294M",
-- "top_audpll",
-- "top_audpll_d4",
-- "top_audpll_d8",
-- "top_audpll_d16",
-- "top_audpll_d24",
-- "top_audintbus_sel",
-- "clk_26m",
-- "top_syspll1_d4",
-- "top_aud_k1_src_sel",
-- "top_aud_k2_src_sel",
-- "top_aud_k3_src_sel",
-- "top_aud_k4_src_sel",
-- "top_aud_k5_src_sel",
-- "top_aud_k6_src_sel",
-- "top_aud_k1_src_div",
-- "top_aud_k2_src_div",
-- "top_aud_k3_src_div",
-- "top_aud_k4_src_div",
-- "top_aud_k5_src_div",
-- "top_aud_k6_src_div",
-- "top_aud_i2s1_mclk",
-- "top_aud_i2s2_mclk",
-- "top_aud_i2s3_mclk",
-- "top_aud_i2s4_mclk",
-- "top_aud_i2s5_mclk",
-- "top_aud_i2s6_mclk",
-- "top_asm_m_sel",
-- "top_asm_h_sel",
-- "top_univpll2_d4",
-- "top_univpll2_d2",
-- "top_syspll_d5";
-+ "i2s0_src_sel",
-+ "i2s1_src_sel",
-+ "i2s2_src_sel",
-+ "i2s3_src_sel",
-+ "i2s0_src_div",
-+ "i2s1_src_div",
-+ "i2s2_src_div",
-+ "i2s3_src_div",
-+ "i2s0_mclk_en",
-+ "i2s1_mclk_en",
-+ "i2s2_mclk_en",
-+ "i2s3_mclk_en",
-+ "i2so0_hop_ck",
-+ "i2so1_hop_ck",
-+ "i2so2_hop_ck",
-+ "i2so3_hop_ck",
-+ "i2si0_hop_ck",
-+ "i2si1_hop_ck",
-+ "i2si2_hop_ck",
-+ "i2si3_hop_ck",
-+ "asrc0_out_ck",
-+ "asrc1_out_ck",
-+ "asrc2_out_ck",
-+ "asrc3_out_ck",
-+ "audio_afe_pd",
-+ "audio_afe_conn_pd",
-+ "audio_a1sys_pd",
-+ "audio_a2sys_pd",
-+ "audio_mrgif_pd";
-+- assigned-clocks: list of input clocks and dividers for the audio system.
-+ See ../clocks/clock-bindings.txt for details.
-+- assigned-clocks-parents: parent of input clocks of assigned clocks.
-+- assigned-clock-rates: list of clock frequencies of assigned clocks.
-
- Example:
-
-@@ -62,93 +55,75 @@ Example:
- <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-- clocks = <&infracfg CLK_INFRA_AUDIO>,
-- <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-+ clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-- <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-- <&topckgen CLK_TOP_AUD_MUX2_DIV>,
-- <&topckgen CLK_TOP_AUD_48K_TIMING>,
-- <&topckgen CLK_TOP_AUD_44K_TIMING>,
-- <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
-- <&topckgen CLK_TOP_APLL_SEL>,
-- <&topckgen CLK_TOP_AUD1PLL_98M>,
-- <&topckgen CLK_TOP_AUD2PLL_90M>,
-- <&topckgen CLK_TOP_HADDS2PLL_98M>,
-- <&topckgen CLK_TOP_HADDS2PLL_294M>,
-- <&topckgen CLK_TOP_AUDPLL>,
-- <&topckgen CLK_TOP_AUDPLL_D4>,
-- <&topckgen CLK_TOP_AUDPLL_D8>,
-- <&topckgen CLK_TOP_AUDPLL_D16>,
-- <&topckgen CLK_TOP_AUDPLL_D24>,
-- <&topckgen CLK_TOP_AUDINTBUS_SEL>,
-- <&clk26m>,
-- <&topckgen CLK_TOP_SYSPLL1_D4>,
- <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-- <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
-- <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
-- <&topckgen CLK_TOP_ASM_M_SEL>,
-- <&topckgen CLK_TOP_ASM_H_SEL>,
-- <&topckgen CLK_TOP_UNIVPLL2_D4>,
-- <&topckgen CLK_TOP_UNIVPLL2_D2>,
-- <&topckgen CLK_TOP_SYSPLL_D5>;
-+ <&audiosys CLK_AUD_I2SO1>,
-+ <&audiosys CLK_AUD_I2SO2>,
-+ <&audiosys CLK_AUD_I2SO3>,
-+ <&audiosys CLK_AUD_I2SO4>,
-+ <&audiosys CLK_AUD_I2SIN1>,
-+ <&audiosys CLK_AUD_I2SIN2>,
-+ <&audiosys CLK_AUD_I2SIN3>,
-+ <&audiosys CLK_AUD_I2SIN4>,
-+ <&audiosys CLK_AUD_ASRCO1>,
-+ <&audiosys CLK_AUD_ASRCO2>,
-+ <&audiosys CLK_AUD_ASRCO3>,
-+ <&audiosys CLK_AUD_ASRCO4>,
-+ <&audiosys CLK_AUD_AFE>,
-+ <&audiosys CLK_AUD_AFE_CONN>,
-+ <&audiosys CLK_AUD_A1SYS>,
-+ <&audiosys CLK_AUD_A2SYS>,
-+ <&audiosys CLK_AUD_AFE_MRGIF>;
-
-- clock-names = "infra_sys_audio_clk",
-- "top_audio_mux1_sel",
-+ clock-names = "top_audio_mux1_sel",
- "top_audio_mux2_sel",
-- "top_audio_mux1_div",
-- "top_audio_mux2_div",
-- "top_audio_48k_timing",
-- "top_audio_44k_timing",
-- "top_audpll_mux_sel",
-- "top_apll_sel",
-- "top_aud1_pll_98M",
-- "top_aud2_pll_90M",
-- "top_hadds2_pll_98M",
-- "top_hadds2_pll_294M",
-- "top_audpll",
-- "top_audpll_d4",
-- "top_audpll_d8",
-- "top_audpll_d16",
-- "top_audpll_d24",
-- "top_audintbus_sel",
-- "clk_26m",
-- "top_syspll1_d4",
-- "top_aud_k1_src_sel",
-- "top_aud_k2_src_sel",
-- "top_aud_k3_src_sel",
-- "top_aud_k4_src_sel",
-- "top_aud_k5_src_sel",
-- "top_aud_k6_src_sel",
-- "top_aud_k1_src_div",
-- "top_aud_k2_src_div",
-- "top_aud_k3_src_div",
-- "top_aud_k4_src_div",
-- "top_aud_k5_src_div",
-- "top_aud_k6_src_div",
-- "top_aud_i2s1_mclk",
-- "top_aud_i2s2_mclk",
-- "top_aud_i2s3_mclk",
-- "top_aud_i2s4_mclk",
-- "top_aud_i2s5_mclk",
-- "top_aud_i2s6_mclk",
-- "top_asm_m_sel",
-- "top_asm_h_sel",
-- "top_univpll2_d4",
-- "top_univpll2_d2",
-- "top_syspll_d5";
-+ "i2s0_src_sel",
-+ "i2s1_src_sel",
-+ "i2s2_src_sel",
-+ "i2s3_src_sel",
-+ "i2s0_src_div",
-+ "i2s1_src_div",
-+ "i2s2_src_div",
-+ "i2s3_src_div",
-+ "i2s0_mclk_en",
-+ "i2s1_mclk_en",
-+ "i2s2_mclk_en",
-+ "i2s3_mclk_en",
-+ "i2so0_hop_ck",
-+ "i2so1_hop_ck",
-+ "i2so2_hop_ck",
-+ "i2so3_hop_ck",
-+ "i2si0_hop_ck",
-+ "i2si1_hop_ck",
-+ "i2si2_hop_ck",
-+ "i2si3_hop_ck",
-+ "asrc0_out_ck",
-+ "asrc1_out_ck",
-+ "asrc2_out_ck",
-+ "asrc3_out_ck",
-+ "audio_afe_pd",
-+ "audio_afe_conn_pd",
-+ "audio_a1sys_pd",
-+ "audio_a2sys_pd",
-+ "audio_mrgif_pd";
-+
-+ assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-+ <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-+ <&topckgen CLK_TOP_AUD2PLL_90M>;
-+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
- };
diff --git a/target/linux/mediatek/patches-4.14/0184-ASoC-mediatek-add-some-core-clocks-for-MT2701-AFE.patch b/target/linux/mediatek/patches-4.14/0184-ASoC-mediatek-add-some-core-clocks-for-MT2701-AFE.patch
deleted file mode 100644
index 937232ed16..0000000000
--- a/target/linux/mediatek/patches-4.14/0184-ASoC-mediatek-add-some-core-clocks-for-MT2701-AFE.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e0e3768b73daae674c69db1f71718894274b7bfc Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Thu, 4 Jan 2018 15:44:07 +0800
-Subject: [PATCH 184/224] ASoC: mediatek: add some core clocks for MT2701 AFE
-
-Add three core clocks for MT2701 AFE.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c | 30 ++++++++++++++++++++++-
- sound/soc/mediatek/mt2701/mt2701-afe-common.h | 3 +++
- 2 files changed, 32 insertions(+), 1 deletion(-)
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
-@@ -18,8 +18,11 @@
- #include "mt2701-afe-clock-ctrl.h"
-
- static const char *const base_clks[] = {
-+ [MT2701_INFRA_SYS_AUDIO] = "infra_sys_audio_clk",
- [MT2701_TOP_AUD_MCLK_SRC0] = "top_audio_mux1_sel",
- [MT2701_TOP_AUD_MCLK_SRC1] = "top_audio_mux2_sel",
-+ [MT2701_TOP_AUD_A1SYS] = "top_audio_a1sys_hp",
-+ [MT2701_TOP_AUD_A2SYS] = "top_audio_a2sys_hp",
- [MT2701_AUDSYS_AFE] = "audio_afe_pd",
- [MT2701_AUDSYS_AFE_CONN] = "audio_afe_conn_pd",
- [MT2701_AUDSYS_A1SYS] = "audio_a1sys_pd",
-@@ -169,10 +172,26 @@ static int mt2701_afe_enable_audsys(stru
- struct mt2701_afe_private *afe_priv = afe->platform_priv;
- int ret;
-
-- ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-+ /* Enable infra clock gate */
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_INFRA_SYS_AUDIO]);
- if (ret)
- return ret;
-
-+ /* Enable top a1sys clock gate */
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_TOP_AUD_A1SYS]);
-+ if (ret)
-+ goto err_a1sys;
-+
-+ /* Enable top a2sys clock gate */
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_TOP_AUD_A2SYS]);
-+ if (ret)
-+ goto err_a2sys;
-+
-+ /* Internal clock gates */
-+ ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-+ if (ret)
-+ goto err_afe;
-+
- ret = clk_prepare_enable(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
- if (ret)
- goto err_audio_a1sys;
-@@ -193,6 +212,12 @@ err_audio_a2sys:
- clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
- err_audio_a1sys:
- clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-+err_afe:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_TOP_AUD_A2SYS]);
-+err_a2sys:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_TOP_AUD_A1SYS]);
-+err_a1sys:
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_INFRA_SYS_AUDIO]);
-
- return ret;
- }
-@@ -205,6 +230,9 @@ static void mt2701_afe_disable_audsys(st
- clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A2SYS]);
- clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_A1SYS]);
- clk_disable_unprepare(afe_priv->base_ck[MT2701_AUDSYS_AFE]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_TOP_AUD_A1SYS]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_TOP_AUD_A2SYS]);
-+ clk_disable_unprepare(afe_priv->base_ck[MT2701_INFRA_SYS_AUDIO]);
- }
-
- int mt2701_afe_enable_clock(struct mtk_base_afe *afe)
---- a/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
-@@ -61,8 +61,11 @@ enum {
- };
-
- enum audio_base_clock {
-+ MT2701_INFRA_SYS_AUDIO,
- MT2701_TOP_AUD_MCLK_SRC0,
- MT2701_TOP_AUD_MCLK_SRC1,
-+ MT2701_TOP_AUD_A1SYS,
-+ MT2701_TOP_AUD_A2SYS,
- MT2701_AUDSYS_AFE,
- MT2701_AUDSYS_AFE_CONN,
- MT2701_AUDSYS_A1SYS,
diff --git a/target/linux/mediatek/patches-4.14/0185-ASoC-mediatek-modify-MT2701-AFE-driver-to-adapt-mfd-.patch b/target/linux/mediatek/patches-4.14/0185-ASoC-mediatek-modify-MT2701-AFE-driver-to-adapt-mfd-.patch
deleted file mode 100644
index 462cbbc13b..0000000000
--- a/target/linux/mediatek/patches-4.14/0185-ASoC-mediatek-modify-MT2701-AFE-driver-to-adapt-mfd-.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 310ca2954c7cce10d716001ff869bc255494e3df Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Thu, 4 Jan 2018 15:44:08 +0800
-Subject: [PATCH 185/224] ASoC: mediatek: modify MT2701 AFE driver to adapt mfd
- device
-
-As the new MFD parent is in place, modify MT2701 AFE driver to adapt it.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 45 +++++++++++++-----------------
- sound/soc/mediatek/mt2701/mt2701-reg.h | 1 -
- 2 files changed, 20 insertions(+), 26 deletions(-)
-
---- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
-@@ -17,6 +17,7 @@
-
- #include <linux/delay.h>
- #include <linux/module.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/pm_runtime.h>
-@@ -1368,14 +1369,6 @@ static const struct mt2701_i2s_data mt27
- },
- };
-
--static const struct regmap_config mt2701_afe_regmap_config = {
-- .reg_bits = 32,
-- .reg_stride = 4,
-- .val_bits = 32,
-- .max_register = AFE_END_ADDR,
-- .cache_type = REGCACHE_NONE,
--};
--
- static irqreturn_t mt2701_asys_isr(int irq_id, void *dev)
- {
- int id;
-@@ -1414,9 +1407,9 @@ static int mt2701_afe_runtime_resume(str
-
- static int mt2701_afe_pcm_dev_probe(struct platform_device *pdev)
- {
-+ struct snd_soc_component *component;
- struct mtk_base_afe *afe;
- struct mt2701_afe_private *afe_priv;
-- struct resource *res;
- struct device *dev;
- int i, irq_id, ret;
-
-@@ -1446,17 +1439,11 @@ static int mt2701_afe_pcm_dev_probe(stru
- return ret;
- }
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
-- afe->base_addr = devm_ioremap_resource(&pdev->dev, res);
--
-- if (IS_ERR(afe->base_addr))
-- return PTR_ERR(afe->base_addr);
--
-- afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
-- &mt2701_afe_regmap_config);
-- if (IS_ERR(afe->regmap))
-- return PTR_ERR(afe->regmap);
-+ afe->regmap = syscon_node_to_regmap(dev->parent->of_node);
-+ if (!afe->regmap) {
-+ dev_err(dev, "could not get regmap from parent\n");
-+ return -ENODEV;
-+ }
-
- mutex_init(&afe->irq_alloc_lock);
-
-@@ -1490,6 +1477,12 @@ static int mt2701_afe_pcm_dev_probe(stru
- = &mt2701_i2s_data[i][I2S_IN];
- }
-
-+ component = kzalloc(sizeof(*component), GFP_KERNEL);
-+ if (!component)
-+ return -ENOMEM;
-+
-+ component->regmap = afe->regmap;
-+
- afe->mtk_afe_hardware = &mt2701_afe_hardware;
- afe->memif_fs = mt2701_memif_fs;
- afe->irq_fs = mt2701_irq_fs;
-@@ -1502,7 +1495,7 @@ static int mt2701_afe_pcm_dev_probe(stru
- ret = mt2701_init_clock(afe);
- if (ret) {
- dev_err(dev, "init clock error\n");
-- return ret;
-+ goto err_init_clock;
- }
-
- platform_set_drvdata(pdev, afe);
-@@ -1521,10 +1514,10 @@ static int mt2701_afe_pcm_dev_probe(stru
- goto err_platform;
- }
-
-- ret = snd_soc_register_component(&pdev->dev,
-- &mt2701_afe_pcm_dai_component,
-- mt2701_afe_pcm_dais,
-- ARRAY_SIZE(mt2701_afe_pcm_dais));
-+ ret = snd_soc_add_component(dev, component,
-+ &mt2701_afe_pcm_dai_component,
-+ mt2701_afe_pcm_dais,
-+ ARRAY_SIZE(mt2701_afe_pcm_dais));
- if (ret) {
- dev_warn(dev, "err_dai_component\n");
- goto err_dai_component;
-@@ -1538,6 +1531,8 @@ err_platform:
- pm_runtime_put_sync(dev);
- err_pm_disable:
- pm_runtime_disable(dev);
-+err_init_clock:
-+ kfree(component);
-
- return ret;
- }
---- a/sound/soc/mediatek/mt2701/mt2701-reg.h
-+++ b/sound/soc/mediatek/mt2701/mt2701-reg.h
-@@ -145,5 +145,4 @@
- #define ASYS_I2S_CON_WIDE_MODE_SET(x) ((x) << 1)
- #define ASYS_I2S_IN_PHASE_FIX (0x1 << 31)
-
--#define AFE_END_ADDR 0x15e0
- #endif
diff --git a/target/linux/mediatek/patches-4.14/0186-ASoC-mediatek-update-MT2701-AFE-documentation-to-ada.patch b/target/linux/mediatek/patches-4.14/0186-ASoC-mediatek-update-MT2701-AFE-documentation-to-ada.patch
deleted file mode 100644
index 87a6158b40..0000000000
--- a/target/linux/mediatek/patches-4.14/0186-ASoC-mediatek-update-MT2701-AFE-documentation-to-ada.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From 018219d340c0f7a10098683b8a4733618ea76ba3 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Thu, 4 Jan 2018 15:44:09 +0800
-Subject: [PATCH 186/224] ASoC: mediatek: update MT2701 AFE documentation to
- adapt mfd device
-
-As the new MFD parent is in place, modify MT2701 AFE documentation to
-adapt it. Also add three core clocks in example.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../devicetree/bindings/sound/mt2701-afe-pcm.txt | 171 +++++++++++----------
- 1 file changed, 93 insertions(+), 78 deletions(-)
-
---- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
-+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
-@@ -2,15 +2,17 @@ Mediatek AFE PCM controller for mt2701
-
- Required properties:
- - compatible = "mediatek,mt2701-audio";
--- reg: register location and size
- - interrupts: should contain AFE and ASYS interrupts
- - interrupt-names: should be "afe" and "asys"
- - power-domains: should define the power domain
- - clocks: Must contain an entry for each entry in clock-names
- See ../clocks/clock-bindings.txt for details
- - clock-names: should have these clock names:
-+ "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
-+ "top_audio_a1sys_hp",
-+ "top_audio_a2sys_hp",
- "i2s0_src_sel",
- "i2s1_src_sel",
- "i2s2_src_sel",
-@@ -45,85 +47,98 @@ Required properties:
- - assigned-clocks-parents: parent of input clocks of assigned clocks.
- - assigned-clock-rates: list of clock frequencies of assigned clocks.
-
-+Must be a subnode of MediaTek audsys device tree node.
-+See ../arm/mediatek/mediatek,audsys.txt for details about the parent node.
-+
- Example:
-
-- afe: mt2701-afe-pcm@11220000 {
-- compatible = "mediatek,mt2701-audio";
-- reg = <0 0x11220000 0 0x2000>,
-- <0 0x112A0000 0 0x20000>;
-- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-- <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-- interrupt-names = "afe", "asys";
-- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-- clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-- <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-- <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-- <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-- <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-- <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-- <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-- <&audiosys CLK_AUD_I2SO1>,
-- <&audiosys CLK_AUD_I2SO2>,
-- <&audiosys CLK_AUD_I2SO3>,
-- <&audiosys CLK_AUD_I2SO4>,
-- <&audiosys CLK_AUD_I2SIN1>,
-- <&audiosys CLK_AUD_I2SIN2>,
-- <&audiosys CLK_AUD_I2SIN3>,
-- <&audiosys CLK_AUD_I2SIN4>,
-- <&audiosys CLK_AUD_ASRCO1>,
-- <&audiosys CLK_AUD_ASRCO2>,
-- <&audiosys CLK_AUD_ASRCO3>,
-- <&audiosys CLK_AUD_ASRCO4>,
-- <&audiosys CLK_AUD_AFE>,
-- <&audiosys CLK_AUD_AFE_CONN>,
-- <&audiosys CLK_AUD_A1SYS>,
-- <&audiosys CLK_AUD_A2SYS>,
-- <&audiosys CLK_AUD_AFE_MRGIF>;
--
-- clock-names = "top_audio_mux1_sel",
-- "top_audio_mux2_sel",
-- "i2s0_src_sel",
-- "i2s1_src_sel",
-- "i2s2_src_sel",
-- "i2s3_src_sel",
-- "i2s0_src_div",
-- "i2s1_src_div",
-- "i2s2_src_div",
-- "i2s3_src_div",
-- "i2s0_mclk_en",
-- "i2s1_mclk_en",
-- "i2s2_mclk_en",
-- "i2s3_mclk_en",
-- "i2so0_hop_ck",
-- "i2so1_hop_ck",
-- "i2so2_hop_ck",
-- "i2so3_hop_ck",
-- "i2si0_hop_ck",
-- "i2si1_hop_ck",
-- "i2si2_hop_ck",
-- "i2si3_hop_ck",
-- "asrc0_out_ck",
-- "asrc1_out_ck",
-- "asrc2_out_ck",
-- "asrc3_out_ck",
-- "audio_afe_pd",
-- "audio_afe_conn_pd",
-- "audio_a1sys_pd",
-- "audio_a2sys_pd",
-- "audio_mrgif_pd";
--
-- assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-- <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-- <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-- assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-- <&topckgen CLK_TOP_AUD2PLL_90M>;
-- assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-+ audsys: audio-subsystem@11220000 {
-+ compatible = "mediatek,mt2701-audsys", "syscon", "simple-mfd";
-+ ...
-+
-+ afe: audio-controller {
-+ compatible = "mediatek,mt2701-audio";
-+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-+ interrupt-names = "afe", "asys";
-+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-+
-+ clocks = <&infracfg CLK_INFRA_AUDIO>,
-+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
-+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
-+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-+ <&audsys CLK_AUD_I2SO1>,
-+ <&audsys CLK_AUD_I2SO2>,
-+ <&audsys CLK_AUD_I2SO3>,
-+ <&audsys CLK_AUD_I2SO4>,
-+ <&audsys CLK_AUD_I2SIN1>,
-+ <&audsys CLK_AUD_I2SIN2>,
-+ <&audsys CLK_AUD_I2SIN3>,
-+ <&audsys CLK_AUD_I2SIN4>,
-+ <&audsys CLK_AUD_ASRCO1>,
-+ <&audsys CLK_AUD_ASRCO2>,
-+ <&audsys CLK_AUD_ASRCO3>,
-+ <&audsys CLK_AUD_ASRCO4>,
-+ <&audsys CLK_AUD_AFE>,
-+ <&audsys CLK_AUD_AFE_CONN>,
-+ <&audsys CLK_AUD_A1SYS>,
-+ <&audsys CLK_AUD_A2SYS>,
-+ <&audsys CLK_AUD_AFE_MRGIF>;
-+
-+ clock-names = "infra_sys_audio_clk",
-+ "top_audio_mux1_sel",
-+ "top_audio_mux2_sel",
-+ "top_audio_a1sys_hp",
-+ "top_audio_a2sys_hp",
-+ "i2s0_src_sel",
-+ "i2s1_src_sel",
-+ "i2s2_src_sel",
-+ "i2s3_src_sel",
-+ "i2s0_src_div",
-+ "i2s1_src_div",
-+ "i2s2_src_div",
-+ "i2s3_src_div",
-+ "i2s0_mclk_en",
-+ "i2s1_mclk_en",
-+ "i2s2_mclk_en",
-+ "i2s3_mclk_en",
-+ "i2so0_hop_ck",
-+ "i2so1_hop_ck",
-+ "i2so2_hop_ck",
-+ "i2so3_hop_ck",
-+ "i2si0_hop_ck",
-+ "i2si1_hop_ck",
-+ "i2si2_hop_ck",
-+ "i2si3_hop_ck",
-+ "asrc0_out_ck",
-+ "asrc1_out_ck",
-+ "asrc2_out_ck",
-+ "asrc3_out_ck",
-+ "audio_afe_pd",
-+ "audio_afe_conn_pd",
-+ "audio_a1sys_pd",
-+ "audio_a2sys_pd",
-+ "audio_mrgif_pd";
-+
-+ assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-+ <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-+ <&topckgen CLK_TOP_AUD2PLL_90M>;
-+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-+ };
- };
diff --git a/target/linux/mediatek/patches-4.14/0187-usb-mtu3-fix-error-code-for-getting-extcon-device.patch b/target/linux/mediatek/patches-4.14/0187-usb-mtu3-fix-error-code-for-getting-extcon-device.patch
deleted file mode 100644
index 2a105eb664..0000000000
--- a/target/linux/mediatek/patches-4.14/0187-usb-mtu3-fix-error-code-for-getting-extcon-device.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 3d5564bbc0a39ba07d1bbdaec1f69a3d39c4495e Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Wed, 3 Jan 2018 16:53:17 +0800
-Subject: [PATCH 187/224] usb: mtu3: fix error code for getting extcon device
-
-When failing to get extcon device, extcon_get_edev_by_phandle()
-may return different error codes, but not only -EPROBE_DEFER,
-so can't always return -EPROBE_DEFER, and fix it.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/mtu3/mtu3_plat.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -317,7 +317,7 @@ static int get_ssusb_rscs(struct platfor
- otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
- if (IS_ERR(otg_sx->edev)) {
- dev_err(ssusb->dev, "couldn't get extcon device\n");
-- return -EPROBE_DEFER;
-+ return PTR_ERR(otg_sx->edev);
- }
- }
-
diff --git a/target/linux/mediatek/patches-4.14/0188-usb-mtu3-supports-remote-wakeup-for-mt2712-with-two-.patch b/target/linux/mediatek/patches-4.14/0188-usb-mtu3-supports-remote-wakeup-for-mt2712-with-two-.patch
deleted file mode 100644
index 2e3f0bd125..0000000000
--- a/target/linux/mediatek/patches-4.14/0188-usb-mtu3-supports-remote-wakeup-for-mt2712-with-two-.patch
+++ /dev/null
@@ -1,233 +0,0 @@
-From 354655aaf0f71ce2b567cbc02afb0664c99e434e Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Wed, 3 Jan 2018 16:53:18 +0800
-Subject: [PATCH 188/224] usb: mtu3: supports remote wakeup for mt2712 with two
- SSUSB IPs
-
-The old way of usb wakeup only supports platform with single SSUSB IP,
-such as mt8173, but mt2712 has two SSUSB IPs, so rebuild its flow and
-also supports the new glue layer of usb wakeup on mt2712 which is
-different from mt8173.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/mtu3/mtu3.h | 11 +++--
- drivers/usb/mtu3/mtu3_dr.h | 3 +-
- drivers/usb/mtu3/mtu3_host.c | 115 +++++++++++++++++++++----------------------
- drivers/usb/mtu3/mtu3_plat.c | 8 +--
- 4 files changed, 70 insertions(+), 67 deletions(-)
-
---- a/drivers/usb/mtu3/mtu3.h
-+++ b/drivers/usb/mtu3/mtu3.h
-@@ -238,7 +238,10 @@ struct otg_switch_mtk {
- * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
- * disable u3port0, bit1==1 to disable u3port1,... etc
- * @dbgfs_root: only used when supports manual dual-role switch via debugfs
-- * @wakeup_en: it's true when supports remote wakeup in host mode
-+ * @uwk_en: it's true when supports remote wakeup in host mode
-+ * @uwk: syscon including usb wakeup glue layer between SSUSB IP and SPM
-+ * @uwk_reg_base: the base address of the wakeup glue layer in @uwk
-+ * @uwk_vers: the version of the wakeup glue layer
- */
- struct ssusb_mtk {
- struct device *dev;
-@@ -262,8 +265,10 @@ struct ssusb_mtk {
- int u3p_dis_msk;
- struct dentry *dbgfs_root;
- /* usb wakeup for host mode */
-- bool wakeup_en;
-- struct regmap *pericfg;
-+ bool uwk_en;
-+ struct regmap *uwk;
-+ u32 uwk_reg_base;
-+ u32 uwk_vers;
- };
-
- /**
---- a/drivers/usb/mtu3/mtu3_dr.h
-+++ b/drivers/usb/mtu3/mtu3_dr.h
-@@ -27,8 +27,7 @@ int ssusb_wakeup_of_property_parse(struc
- struct device_node *dn);
- int ssusb_host_enable(struct ssusb_mtk *ssusb);
- int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend);
--int ssusb_wakeup_enable(struct ssusb_mtk *ssusb);
--void ssusb_wakeup_disable(struct ssusb_mtk *ssusb);
-+void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable);
-
- #else
-
---- a/drivers/usb/mtu3/mtu3_host.c
-+++ b/drivers/usb/mtu3/mtu3_host.c
-@@ -27,66 +27,77 @@
- #include "mtu3.h"
- #include "mtu3_dr.h"
-
--#define PERI_WK_CTRL1 0x404
--#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
--#define UWK_CTL1_IS_E BIT(25)
--#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
--#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
--#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
--#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
-+/* mt8173 etc */
-+#define PERI_WK_CTRL1 0x4
-+#define WC1_IS_C(x) (((x) & 0xf) << 26) /* cycle debounce */
-+#define WC1_IS_EN BIT(25)
-+#define WC1_IS_P BIT(6) /* polarity for ip sleep */
-+
-+/* mt2712 etc */
-+#define PERI_SSUSB_SPM_CTRL 0x0
-+#define SSC_IP_SLEEP_EN BIT(4)
-+#define SSC_SPM_INT_EN BIT(1)
-+
-+enum ssusb_uwk_vers {
-+ SSUSB_UWK_V1 = 1,
-+ SSUSB_UWK_V2,
-+};
-
- /*
- * ip-sleep wakeup mode:
- * all clocks can be turn off, but power domain should be kept on
- */
--static void ssusb_wakeup_ip_sleep_en(struct ssusb_mtk *ssusb)
-+static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
- {
-- u32 tmp;
-- struct regmap *pericfg = ssusb->pericfg;
-+ u32 reg, msk, val;
-
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_IS_P;
-- tmp &= ~(UWK_CTL1_IS_C(0xf));
-- tmp |= UWK_CTL1_IS_C(0x8);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
--
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- dev_dbg(ssusb->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
-- __func__, tmp);
--}
--
--static void ssusb_wakeup_ip_sleep_dis(struct ssusb_mtk *ssusb)
--{
-- u32 tmp;
--
-- regmap_read(ssusb->pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_IS_E;
-- regmap_write(ssusb->pericfg, PERI_WK_CTRL1, tmp);
-+ switch (ssusb->uwk_vers) {
-+ case SSUSB_UWK_V1:
-+ reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
-+ msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
-+ val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
-+ break;
-+ case SSUSB_UWK_V2:
-+ reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
-+ msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
-+ val = enable ? msk : 0;
-+ break;
-+ default:
-+ return;
-+ };
-+ regmap_update_bits(ssusb->uwk, reg, msk, val);
- }
-
- int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
- struct device_node *dn)
- {
-- struct device *dev = ssusb->dev;
-+ struct of_phandle_args args;
-+ int ret;
-
-- /*
-- * Wakeup function is optional, so it is not an error if this property
-- * does not exist, and in such case, no need to get relative
-- * properties anymore.
-- */
-- ssusb->wakeup_en = of_property_read_bool(dn, "mediatek,enable-wakeup");
-- if (!ssusb->wakeup_en)
-+ /* wakeup function is optional */
-+ ssusb->uwk_en = of_property_read_bool(dn, "wakeup-source");
-+ if (!ssusb->uwk_en)
- return 0;
-
-- ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
-- "mediatek,syscon-wakeup");
-- if (IS_ERR(ssusb->pericfg)) {
-- dev_err(dev, "fail to get pericfg regs\n");
-- return PTR_ERR(ssusb->pericfg);
-- }
-+ ret = of_parse_phandle_with_fixed_args(dn,
-+ "mediatek,syscon-wakeup", 2, 0, &args);
-+ if (ret)
-+ return ret;
-
-- return 0;
-+ ssusb->uwk_reg_base = args.args[0];
-+ ssusb->uwk_vers = args.args[1];
-+ ssusb->uwk = syscon_node_to_regmap(args.np);
-+ of_node_put(args.np);
-+ dev_info(ssusb->dev, "uwk - reg:0x%x, version:%d\n",
-+ ssusb->uwk_reg_base, ssusb->uwk_vers);
-+
-+ return PTR_ERR_OR_ZERO(ssusb->uwk);
-+}
-+
-+void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable)
-+{
-+ if (ssusb->uwk_en)
-+ ssusb_wakeup_ip_sleep_set(ssusb, enable);
- }
-
- static void host_ports_num_get(struct ssusb_mtk *ssusb)
-@@ -244,17 +255,3 @@ void ssusb_host_exit(struct ssusb_mtk *s
- of_platform_depopulate(ssusb->dev);
- ssusb_host_cleanup(ssusb);
- }
--
--int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
--{
-- if (ssusb->wakeup_en)
-- ssusb_wakeup_ip_sleep_en(ssusb);
--
-- return 0;
--}
--
--void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
--{
-- if (ssusb->wakeup_en)
-- ssusb_wakeup_ip_sleep_dis(ssusb);
--}
---- a/drivers/usb/mtu3/mtu3_plat.c
-+++ b/drivers/usb/mtu3/mtu3_plat.c
-@@ -291,8 +291,10 @@ static int get_ssusb_rscs(struct platfor
-
- /* if host role is supported */
- ret = ssusb_wakeup_of_property_parse(ssusb, node);
-- if (ret)
-+ if (ret) {
-+ dev_err(dev, "failed to parse uwk property\n");
- return ret;
-+ }
-
- /* optional property, ignore the error if it does not exist */
- of_property_read_u32(node, "mediatek,u3p-dis-msk",
-@@ -466,7 +468,7 @@ static int __maybe_unused mtu3_suspend(s
- ssusb_host_disable(ssusb, true);
- ssusb_phy_power_off(ssusb);
- ssusb_clks_disable(ssusb);
-- ssusb_wakeup_enable(ssusb);
-+ ssusb_wakeup_set(ssusb, true);
-
- return 0;
- }
-@@ -482,7 +484,7 @@ static int __maybe_unused mtu3_resume(st
- if (!ssusb->is_host)
- return 0;
-
-- ssusb_wakeup_disable(ssusb);
-+ ssusb_wakeup_set(ssusb, false);
- ret = ssusb_clks_enable(ssusb);
- if (ret)
- goto clks_err;
diff --git a/target/linux/mediatek/patches-4.14/0189-dt-bindings-usb-mtu3-update-USB-wakeup-properties.patch b/target/linux/mediatek/patches-4.14/0189-dt-bindings-usb-mtu3-update-USB-wakeup-properties.patch
deleted file mode 100644
index 393127e67c..0000000000
--- a/target/linux/mediatek/patches-4.14/0189-dt-bindings-usb-mtu3-update-USB-wakeup-properties.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 067ad5fd18e2e7e38b77ca94eebaaf8d9a35d842 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Wed, 3 Jan 2018 16:53:19 +0800
-Subject: [PATCH 189/224] dt-bindings: usb: mtu3: update USB wakeup properties
-
-Add two arguments in "mediatek,syscon-wakeup" to support multi
-wakeup glue layer between SSUSB and SPM, and use standard property
-"wakeup-source" to replace the private "mediatek,enable-wakeup"
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-@@ -42,9 +42,14 @@ Optional properties:
- - enable-manual-drd : supports manual dual-role switch via debugfs; usually
- used when receptacle is TYPE-A and also wants to support dual-role
- mode.
-- - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
-- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
-- control register, it depends on "mediatek,enable-wakeup".
-+ - wakeup-source: enable USB remote wakeup of host mode.
-+ - mediatek,syscon-wakeup : phandle to syscon used to access the register
-+ of the USB wakeup glue layer between SSUSB and SPM; it depends on
-+ "wakeup-source", and has two arguments:
-+ - the first one : register base address of the glue layer in syscon;
-+ - the second one : hardware version of the glue layer
-+ - 1 : used by mt8173 etc
-+ - 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
- bit1 for u3port1, ... etc;
-
-@@ -71,8 +76,8 @@ ssusb: usb@11271000 {
- vbus-supply = <&usb_p0_vbus>;
- extcon = <&extcon_usb>;
- dr_mode = "otg";
-- mediatek,enable-wakeup;
-- mediatek,syscon-wakeup = <&pericfg>;
-+ wakeup-source;
-+ mediatek,syscon-wakeup = <&pericfg 0x400 1>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
diff --git a/target/linux/mediatek/patches-4.14/0190-usb-xhci-mtk-supports-remote-wakeup-for-mt2712-with-.patch b/target/linux/mediatek/patches-4.14/0190-usb-xhci-mtk-supports-remote-wakeup-for-mt2712-with-.patch
deleted file mode 100644
index c49efcbd38..0000000000
--- a/target/linux/mediatek/patches-4.14/0190-usb-xhci-mtk-supports-remote-wakeup-for-mt2712-with-.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From e6fe50ef22071fe87ce48f79ab4fe21cbec2081b Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Wed, 3 Jan 2018 16:53:20 +0800
-Subject: [PATCH 190/224] usb: xhci-mtk: supports remote wakeup for mt2712 with
- two xHCI IPs
-
-The old way of usb wakeup only supports platform with single xHCI IP,
-such as mt8173, but mt2712 has two xHCI IPs, so rebuild its flow and
-supports the new glue layer of usb wakeup on mt2712 which is different
-from mt8173.
-Due to there is a hardware bug with the LINE STATE wakeup mode on
-mt8173 which causes wakeup failure by low speed devices, and also
-because IP SLEEP mode can cover all functions of LINE STATE mode,
-it is unused in fact, and will not support it later, so remove it at
-the same time.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/xhci-mtk.c | 177 +++++++++++++++-----------------------------
- drivers/usb/host/xhci-mtk.h | 6 +-
- 2 files changed, 65 insertions(+), 118 deletions(-)
-
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -66,26 +66,21 @@
- /* u2_phy_pll register */
- #define CTRL_U2_FORCE_PLL_STB BIT(28)
-
--#define PERI_WK_CTRL0 0x400
--#define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */
--#define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/
--#define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1)
--#define UWK_CTL1_1P_LS_E BIT(0)
--
--#define PERI_WK_CTRL1 0x404
--#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
--#define UWK_CTL1_IS_E BIT(25)
--#define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21)
--#define UWK_CTL1_0P_LS_E BIT(20)
--#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
--#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
--#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
--#define UWK_CTL1_0P_LS_P BIT(7)
--#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
--
--enum ssusb_wakeup_src {
-- SSUSB_WK_IP_SLEEP = 1,
-- SSUSB_WK_LINE_STATE = 2,
-+/* usb remote wakeup registers in syscon */
-+/* mt8173 etc */
-+#define PERI_WK_CTRL1 0x4
-+#define WC1_IS_C(x) (((x) & 0xf) << 26) /* cycle debounce */
-+#define WC1_IS_EN BIT(25)
-+#define WC1_IS_P BIT(6) /* polarity for ip sleep */
-+
-+/* mt2712 etc */
-+#define PERI_SSUSB_SPM_CTRL 0x0
-+#define SSC_IP_SLEEP_EN BIT(4)
-+#define SSC_SPM_INT_EN BIT(1)
-+
-+enum ssusb_uwk_vers {
-+ SSUSB_UWK_V1 = 1,
-+ SSUSB_UWK_V2,
- };
-
- static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
-@@ -308,112 +303,58 @@ static void xhci_mtk_clks_disable(struct
- }
-
- /* only clocks can be turn off for ip-sleep wakeup mode */
--static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
-+static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
- {
-- u32 tmp;
-- struct regmap *pericfg = mtk->pericfg;
-+ u32 reg, msk, val;
-
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_IS_P;
-- tmp &= ~(UWK_CTL1_IS_C(0xf));
-- tmp |= UWK_CTL1_IS_C(0x8);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
--
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
-- __func__, tmp);
--}
--
--static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
--{
-- u32 tmp;
--
-- regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_IS_E;
-- regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
-+ switch (mtk->uwk_vers) {
-+ case SSUSB_UWK_V1:
-+ reg = mtk->uwk_reg_base + PERI_WK_CTRL1;
-+ msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
-+ val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
-+ break;
-+ case SSUSB_UWK_V2:
-+ reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
-+ msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
-+ val = enable ? msk : 0;
-+ break;
-+ default:
-+ return;
-+ };
-+ regmap_update_bits(mtk->uwk, reg, msk, val);
- }
-
--/*
--* for line-state wakeup mode, phy's power should not power-down
--* and only support cable plug in/out
--*/
--static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
-+static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
-+ struct device_node *dn)
- {
-- u32 tmp;
-- struct regmap *pericfg = mtk->pericfg;
--
-- /* line-state of u2-port0 */
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_0P_LS_P;
-- tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
-- tmp |= UWK_CTL1_0P_LS_C(0x8);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
-+ struct of_phandle_args args;
-+ int ret;
-
-- /* line-state of u2-port1 */
-- regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
-- tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
-- tmp |= UWK_CTL1_1P_LS_C(0x8);
-- regmap_write(pericfg, PERI_WK_CTRL0, tmp);
-- regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
--}
-+ /* Wakeup function is optional */
-+ mtk->uwk_en = of_property_read_bool(dn, "wakeup-source");
-+ if (!mtk->uwk_en)
-+ return 0;
-
--static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
--{
-- u32 tmp;
-- struct regmap *pericfg = mtk->pericfg;
-+ ret = of_parse_phandle_with_fixed_args(dn,
-+ "mediatek,syscon-wakeup", 2, 0, &args);
-+ if (ret)
-+ return ret;
-
-- /* line-state of u2-port0 */
-- regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-- tmp &= ~UWK_CTL1_0P_LS_E;
-- regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-+ mtk->uwk_reg_base = args.args[0];
-+ mtk->uwk_vers = args.args[1];
-+ mtk->uwk = syscon_node_to_regmap(args.np);
-+ of_node_put(args.np);
-+ dev_info(mtk->dev, "uwk - reg:0x%x, version:%d\n",
-+ mtk->uwk_reg_base, mtk->uwk_vers);
-
-- /* line-state of u2-port1 */
-- regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
-- tmp &= ~UWK_CTL1_1P_LS_E;
-- regmap_write(pericfg, PERI_WK_CTRL0, tmp);
--}
-+ return PTR_ERR_OR_ZERO(mtk->uwk);
-
--static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
--{
-- if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
-- usb_wakeup_ip_sleep_en(mtk);
-- else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
-- usb_wakeup_line_state_en(mtk);
- }
-
--static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
-+static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable)
- {
-- if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
-- usb_wakeup_ip_sleep_dis(mtk);
-- else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
-- usb_wakeup_line_state_dis(mtk);
--}
--
--static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
-- struct device_node *dn)
--{
-- struct device *dev = mtk->dev;
--
-- /*
-- * wakeup function is optional, so it is not an error if this property
-- * does not exist, and in such case, no need to get relative
-- * properties anymore.
-- */
-- of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-- if (!mtk->wakeup_src)
-- return 0;
--
-- mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
-- "mediatek,syscon-wakeup");
-- if (IS_ERR(mtk->pericfg)) {
-- dev_err(dev, "fail to get pericfg regs\n");
-- return PTR_ERR(mtk->pericfg);
-- }
--
-- return 0;
-+ if (mtk->uwk_en)
-+ usb_wakeup_ip_sleep_set(mtk, enable);
- }
-
- static int xhci_mtk_setup(struct usb_hcd *hcd);
-@@ -595,8 +536,10 @@ static int xhci_mtk_probe(struct platfor
- &mtk->u3p_dis_msk);
-
- ret = usb_wakeup_of_property_parse(mtk, node);
-- if (ret)
-+ if (ret) {
-+ dev_err(dev, "failed to parse uwk property\n");
- return ret;
-+ }
-
- mtk->num_phys = of_count_phandle_with_args(node,
- "phys", "#phy-cells");
-@@ -782,7 +725,7 @@ static int __maybe_unused xhci_mtk_suspe
- xhci_mtk_host_disable(mtk);
- xhci_mtk_phy_power_off(mtk);
- xhci_mtk_clks_disable(mtk);
-- usb_wakeup_enable(mtk);
-+ usb_wakeup_set(mtk, true);
- return 0;
- }
-
-@@ -792,7 +735,7 @@ static int __maybe_unused xhci_mtk_resum
- struct usb_hcd *hcd = mtk->hcd;
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
-- usb_wakeup_disable(mtk);
-+ usb_wakeup_set(mtk, false);
- xhci_mtk_clks_enable(mtk);
- xhci_mtk_phy_power_on(mtk);
- xhci_mtk_host_enable(mtk);
---- a/drivers/usb/host/xhci-mtk.h
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -131,8 +131,12 @@ struct xhci_hcd_mtk {
- struct regmap *pericfg;
- struct phy **phys;
- int num_phys;
-- int wakeup_src;
- bool lpm_support;
-+ /* usb remote wakeup */
-+ bool uwk_en;
-+ struct regmap *uwk;
-+ u32 uwk_reg_base;
-+ u32 uwk_vers;
- };
-
- static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
diff --git a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch
deleted file mode 100644
index 0f79fa4fd1..0000000000
--- a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From c5c72d252dc8e417388386d5767ea790ee8f5b44 Mon Sep 17 00:00:00 2001
-From: Adam Wallis <awallis@codeaurora.org>
-Date: Fri, 8 Dec 2017 17:59:13 +0200
-Subject: [PATCH 191/224] usb: xhci: allow imod-interval to be configurable
-
-The xHCI driver currently has the IMOD set to 160, which
-translates to an IMOD interval of 40,000ns (160 * 250)ns
-
-Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
-introduced a QUIRK for the MTK platform to adjust this interval to 20,
-which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
-due to the fact that the MTK controller IMOD interval is 8 times
-as much as defined in xHCI spec.
-
-Instead of adding more quirk bits for additional platforms, this patch
-introduces the ability for vendors to set the IMOD_INTERVAL as is
-optimal for their platform. By using device_property_read_u32() on
-"imod-interval-ns", the IMOD INTERVAL can be specified in nano seconds.
-If no interval is specified, the default of 40,000ns (IMOD=160) will be
-used.
-
-No bounds checking has been implemented due to the fact that a vendor
-may have violated the spec and would need to specify a value outside of
-the max 8,000 IRQs/second limit specified in the xHCI spec.
-
-Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Adam Wallis <awallis@codeaurora.org>
-Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 2 ++
- Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
- drivers/usb/host/xhci-mtk.c | 9 +++++++++
- drivers/usb/host/xhci-pci.c | 3 +++
- drivers/usb/host/xhci-plat.c | 5 +++++
- drivers/usb/host/xhci.c | 6 +-----
- drivers/usb/host/xhci.h | 2 ++
- 7 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-@@ -46,6 +46,7 @@ Optional properties:
- - pinctrl-names : a pinctrl state named "default" must be defined
- - pinctrl-0 : pin control group
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-+ - imod-interval-ns: default interrupt moderation interval is 5000ns
-
- Example:
- usb30: usb@11270000 {
-@@ -66,6 +67,7 @@ usb30: usb@11270000 {
- usb3-lpm-capable;
- mediatek,syscon-wakeup = <&pericfg>;
- mediatek,wakeup-src = <1>;
-+ imod-interval-ns = <10000>;
- };
-
- 2nd: dual-role mode with xHCI driver
---- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
-@@ -29,6 +29,7 @@ Optional properties:
- - clocks: reference to a clock
- - usb3-lpm-capable: determines if platform is USB3 LPM capable
- - quirk-broken-port-ped: set if the controller has broken port disable mechanism
-+ - imod-interval-ns: default interrupt moderation interval is 5000ns
-
- Example:
- usb@f0931000 {
---- a/drivers/usb/host/xhci-mtk.c
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -629,6 +629,15 @@ static int xhci_mtk_probe(struct platfor
-
- xhci = hcd_to_xhci(hcd);
- xhci->main_hcd = hcd;
-+
-+ /*
-+ * imod_interval is the interrupt moderation value in nanoseconds.
-+ * The increment interval is 8 times as much as that defined in
-+ * the xHCI spec on MTK's controller.
-+ */
-+ xhci->imod_interval = 5000;
-+ device_property_read_u32(dev, "imod-interval-ns", &xhci->imod_interval);
-+
- xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
- dev_name(dev), hcd);
- if (!xhci->shared_hcd) {
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -279,6 +279,9 @@ static int xhci_pci_setup(struct usb_hcd
- if (!xhci->sbrn)
- pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
-
-+ /* imod_interval is the interrupt moderation value in nanoseconds. */
-+ xhci->imod_interval = 40000;
-+
- retval = xhci_gen_setup(hcd, xhci_pci_quirks);
- if (retval)
- return retval;
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -269,6 +269,11 @@ static int xhci_plat_probe(struct platfo
- if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
- xhci->quirks |= XHCI_BROKEN_PORT_PED;
-
-+ /* imod_interval is the interrupt moderation value in nanoseconds. */
-+ xhci->imod_interval = 40000;
-+ device_property_read_u32(sysdev, "imod-interval-ns",
-+ &xhci->imod_interval);
-+
- hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
- if (IS_ERR(hcd->usb_phy)) {
- ret = PTR_ERR(hcd->usb_phy);
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -610,11 +610,7 @@ int xhci_run(struct usb_hcd *hcd)
- "// Set the interrupt modulation register");
- temp = readl(&xhci->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
-- /*
-- * the increment interval is 8 times as much as that defined
-- * in xHCI spec on MTK's controller
-- */
-- temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160);
-+ temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
- writel(temp, &xhci->ir_set->irq_control);
-
- /* Set the HCD state before we enable the irqs */
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1730,6 +1730,8 @@ struct xhci_hcd {
- u8 max_interrupters;
- u8 max_ports;
- u8 isoc_threshold;
-+ /* imod_interval in ns (I * 250ns) */
-+ u32 imod_interval;
- int event_ring_max;
- /* 4KB min, 128MB max */
- int page_size;
diff --git a/target/linux/mediatek/patches-4.14/0192-dt-bindings-usb-mtk-xhci-update-USB-wakeup-propertie.patch b/target/linux/mediatek/patches-4.14/0192-dt-bindings-usb-mtk-xhci-update-USB-wakeup-propertie.patch
deleted file mode 100644
index 13d5a2cd05..0000000000
--- a/target/linux/mediatek/patches-4.14/0192-dt-bindings-usb-mtk-xhci-update-USB-wakeup-propertie.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From bbbbdd36c7311a786d7392f2394b355b1f78cf8b Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Wed, 3 Jan 2018 16:53:21 +0800
-Subject: [PATCH 192/224] dt-bindings: usb: mtk-xhci: update USB wakeup
- properties
-
-Add two arguments in "mediatek,syscon-wakeup" to support multi
-wakeup glue layer between SSUSB and SPM, and use standard property
-"wakeup-source" to replace the private "mediatek,wakeup-src"
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- .../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 16 ++++++++++------
- 1 file changed, 10 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-@@ -35,10 +35,14 @@ Required properties:
- - phys : a list of phandle + phy specifier pairs
-
- Optional properties:
-- - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
-- mode;
-- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
-- control register, it depends on "mediatek,wakeup-src".
-+ - wakeup-source : enable USB remote wakeup;
-+ - mediatek,syscon-wakeup : phandle to syscon used to access the register
-+ of the USB wakeup glue layer between xHCI and SPM; it depends on
-+ "wakeup-source", and has two arguments:
-+ - the first one : register base address of the glue layer in syscon;
-+ - the second one : hardware version of the glue layer
-+ - 1 : used by mt8173 etc
-+ - 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
- bit1 for u3port1, ... etc;
- - vbus-supply : reference to the VBUS regulator;
-@@ -65,8 +69,8 @@ usb30: usb@11270000 {
- vusb33-supply = <&mt6397_vusb_reg>;
- vbus-supply = <&usb_p1_vbus>;
- usb3-lpm-capable;
-- mediatek,syscon-wakeup = <&pericfg>;
-- mediatek,wakeup-src = <1>;
-+ mediatek,syscon-wakeup = <&pericfg 0x400 1>;
-+ wakeup-source;
- imod-interval-ns = <10000>;
- };
-
diff --git a/target/linux/mediatek/patches-4.14/0193-clk-mediatek-adjust-dependency-of-reset.c-to-avoid-u.patch b/target/linux/mediatek/patches-4.14/0193-clk-mediatek-adjust-dependency-of-reset.c-to-avoid-u.patch
deleted file mode 100644
index ee7d035fd8..0000000000
--- a/target/linux/mediatek/patches-4.14/0193-clk-mediatek-adjust-dependency-of-reset.c-to-avoid-u.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 0f9391b4ee12cad5c93e109b9eb6c0c6298da0d3 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 5 Jan 2018 16:14:06 +0800
-Subject: [PATCH 193/224] clk: mediatek: adjust dependency of reset.c to avoid
- unexpectedly being built
-
-Changes from v1->v2:
-Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable
-reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should
-be quite reasonable because the reset controller is tightly embedded
-inside and exported from these clock subsystems. At least it can be found
-on infracfg and pericfg subsystem that both are really fundamental block
-lots of devices must depend on.
-
-commit 74cb0d6dde8 ("clk: mediatek: fixup test-building of MediaTek clock
-drivers") can let the build system looking into the directory where the
-clock drivers resides and then allow test-building the drivers.
-
-But the change also gives rise to certain incorrect behavior which is
-reset.c being built even not depending on either COMPILE_TEST or
-ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built
-unexpectedly on the other platforms, it would be a good change that the
-file should be built depending on its own specific configuration rather
-than just on generic RESET_CONTROLLER one.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Jean Delvare <jdelvare@suse.de>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mediatek/Kconfig | 1 +
- drivers/clk/mediatek/Makefile | 4 ++--
- drivers/clk/mediatek/clk-mtk.h | 7 -------
- 3 files changed, 3 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -6,6 +6,7 @@ menu "Clock driver for MediaTek SoC"
-
- config COMMON_CLK_MEDIATEK
- bool
-+ select RESET_CONTROLLER
- ---help---
- MediaTek SoCs' clock support.
-
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -1,6 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
--obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o
--obj-$(CONFIG_RESET_CONTROLLER) += reset.o
-+obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o reset.o
- obj-$(CONFIG_COMMON_CLK_MT6797) += clk-mt6797.o
- obj-$(CONFIG_COMMON_CLK_MT6797_IMGSYS) += clk-mt6797-img.o
- obj-$(CONFIG_COMMON_CLK_MT6797_MMSYS) += clk-mt6797-mm.o
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -229,14 +229,7 @@ void mtk_clk_register_plls(struct device
- struct clk *mtk_clk_register_ref2usb_tx(const char *name,
- const char *parent_name, void __iomem *reg);
-
--#ifdef CONFIG_RESET_CONTROLLER
- void mtk_register_reset_controller(struct device_node *np,
- unsigned int num_regs, int regofs);
--#else
--static inline void mtk_register_reset_controller(struct device_node *np,
-- unsigned int num_regs, int regofs)
--{
--}
--#endif
-
- #endif /* __DRV_CLK_MTK_H */
diff --git a/target/linux/mediatek/patches-4.14/0194-pinctrl-mediatek-mt7622-fix-potential-uninitialized-.patch b/target/linux/mediatek/patches-4.14/0194-pinctrl-mediatek-mt7622-fix-potential-uninitialized-.patch
deleted file mode 100644
index fc6c2b9150..0000000000
--- a/target/linux/mediatek/patches-4.14/0194-pinctrl-mediatek-mt7622-fix-potential-uninitialized-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From cfcb2cc358f3ff466d4c419d8f6fe0263bdc47b1 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 10 Jan 2018 00:28:24 +0800
-Subject: [PATCH 194/224] pinctrl: mediatek: mt7622: fix potential
- uninitialized value being returned
-
-commit d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622
-SoC") leads to the following static checker warning:
-
-drivers/pinctrl/mediatek/pinctrl-mt7622.c:1419 mtk_gpio_get()
-error: uninitialized symbol 'value'.
-1412 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
-1413 {
-1414 struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent);
-1415 int value;
-1416
-1417 mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
-^^^^^^^^^^^^^^^^
-1418
-1419 return !!value;
-1420 }
-
-The appropriate error handling must be added to avoid the potential error
-caused by uninitialized value being returned.
-
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-@@ -1412,9 +1412,11 @@ static struct pinctrl_desc mtk_desc = {
- static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
- {
- struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent);
-- int value;
-+ int value, err;
-
-- mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
-+ err = mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
-+ if (err)
-+ return err;
-
- return !!value;
- }
diff --git a/target/linux/mediatek/patches-4.14/0195-pinctrl-mediatek-mt7622-align-error-handling-of-mtk_.patch b/target/linux/mediatek/patches-4.14/0195-pinctrl-mediatek-mt7622-align-error-handling-of-mtk_.patch
deleted file mode 100644
index 49842dddb7..0000000000
--- a/target/linux/mediatek/patches-4.14/0195-pinctrl-mediatek-mt7622-align-error-handling-of-mtk_.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 8d3e3f3159284dba7a86788464edd4d5cdba4f06 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 10 Jan 2018 00:28:25 +0800
-Subject: [PATCH 195/224] pinctrl: mediatek: mt7622: align error handling of
- mtk_hw_get_value call
-
-Make consistent error handling of all mtk_hw_get_value occurrences using
-propagating error code from the internal instead of creating a new one.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-@@ -1160,7 +1160,7 @@ static int mtk_pinconf_get(struct pinctr
- case PIN_CONFIG_OUTPUT_ENABLE:
- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_DIR, &val);
- if (err)
-- return -EINVAL;
-+ return err;
-
- /* HW takes input mode as zero; output mode as non-zero */
- if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-@@ -1184,11 +1184,11 @@ static int mtk_pinconf_get(struct pinctr
- case PIN_CONFIG_DRIVE_STRENGTH:
- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E4, &val);
- if (err)
-- return -EINVAL;
-+ return err;
-
- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E8, &val2);
- if (err)
-- return -EINVAL;
-+ return err;
-
- /* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1)
- * 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1)
-@@ -1203,7 +1203,7 @@ static int mtk_pinconf_get(struct pinctr
-
- err = mtk_hw_get_value(hw, pin, reg, &val);
- if (err)
-- return -EINVAL;
-+ return err;
-
- ret = val;
-
diff --git a/target/linux/mediatek/patches-4.14/0196-mtd-mtk-nor-modify-functions-name-more-generally.patch b/target/linux/mediatek/patches-4.14/0196-mtd-mtk-nor-modify-functions-name-more-generally.patch
deleted file mode 100644
index 19466bad63..0000000000
--- a/target/linux/mediatek/patches-4.14/0196-mtd-mtk-nor-modify-functions-name-more-generally.patch
+++ /dev/null
@@ -1,554 +0,0 @@
-From 4dab73d46eb58c142b5d2e7039f12e4e5df357ad Mon Sep 17 00:00:00 2001
-From: Guochun Mao <guochun.mao@mediatek.com>
-Date: Mon, 18 Dec 2017 09:47:35 +0800
-Subject: [PATCH 196/224] mtd: mtk-nor: modify functions' name more generally
-
-Since more and more Mediatek's SoC can use this driver to
-control spi-nor flash, functions' name with "mt8173_" is
-no longer properly. Replacing "mt8173_" with "mtk_" will
-be more accurate to describe these functions' usable scope.
-
-Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
----
- drivers/mtd/spi-nor/mtk-quadspi.c | 240 +++++++++++++++++++-------------------
- 1 file changed, 120 insertions(+), 120 deletions(-)
-
---- a/drivers/mtd/spi-nor/mtk-quadspi.c
-+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
-@@ -110,7 +110,7 @@
- #define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n))
- #define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n))
-
--struct mt8173_nor {
-+struct mtk_nor {
- struct spi_nor nor;
- struct device *dev;
- void __iomem *base; /* nor flash base address */
-@@ -118,48 +118,48 @@ struct mt8173_nor {
- struct clk *nor_clk;
- };
-
--static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
-+static void mtk_nor_set_read_mode(struct mtk_nor *mtk_nor)
- {
-- struct spi_nor *nor = &mt8173_nor->nor;
-+ struct spi_nor *nor = &mtk_nor->nor;
-
- switch (nor->read_proto) {
- case SNOR_PROTO_1_1_1:
-- writeb(nor->read_opcode, mt8173_nor->base +
-+ writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA3_REG);
-- writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
-+ writeb(MTK_NOR_FAST_READ, mtk_nor->base +
- MTK_NOR_CFG1_REG);
- break;
- case SNOR_PROTO_1_1_2:
-- writeb(nor->read_opcode, mt8173_nor->base +
-+ writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA3_REG);
-- writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
-+ writeb(MTK_NOR_DUAL_READ_EN, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- case SNOR_PROTO_1_1_4:
-- writeb(nor->read_opcode, mt8173_nor->base +
-+ writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA4_REG);
-- writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
-+ writeb(MTK_NOR_QUAD_READ_EN, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- default:
-- writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
-+ writeb(MTK_NOR_DUAL_DISABLE, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- }
- }
-
--static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
-+static int mtk_nor_execute_cmd(struct mtk_nor *mtk_nor, u8 cmdval)
- {
- int reg;
- u8 val = cmdval & 0x1f;
-
-- writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
-- return readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
-+ writeb(cmdval, mtk_nor->base + MTK_NOR_CMD_REG);
-+ return readl_poll_timeout(mtk_nor->base + MTK_NOR_CMD_REG, reg,
- !(reg & val), 100, 10000);
- }
-
--static int mt8173_nor_do_tx_rx(struct mt8173_nor *mt8173_nor, u8 op,
-- u8 *tx, int txlen, u8 *rx, int rxlen)
-+static int mtk_nor_do_tx_rx(struct mtk_nor *mtk_nor, u8 op,
-+ u8 *tx, int txlen, u8 *rx, int rxlen)
- {
- int len = 1 + txlen + rxlen;
- int i, ret, idx;
-@@ -167,26 +167,26 @@ static int mt8173_nor_do_tx_rx(struct mt
- if (len > MTK_NOR_MAX_SHIFT)
- return -EINVAL;
-
-- writeb(len * 8, mt8173_nor->base + MTK_NOR_CNT_REG);
-+ writeb(len * 8, mtk_nor->base + MTK_NOR_CNT_REG);
-
- /* start at PRGDATA5, go down to PRGDATA0 */
- idx = MTK_NOR_MAX_RX_TX_SHIFT - 1;
-
- /* opcode */
-- writeb(op, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+ writeb(op, mtk_nor->base + MTK_NOR_PRG_REG(idx));
- idx--;
-
- /* program TX data */
- for (i = 0; i < txlen; i++, idx--)
-- writeb(tx[i], mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+ writeb(tx[i], mtk_nor->base + MTK_NOR_PRG_REG(idx));
-
- /* clear out rest of TX registers */
- while (idx >= 0) {
-- writeb(0, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+ writeb(0, mtk_nor->base + MTK_NOR_PRG_REG(idx));
- idx--;
- }
-
-- ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
-+ ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PRG_CMD);
- if (ret)
- return ret;
-
-@@ -195,20 +195,20 @@ static int mt8173_nor_do_tx_rx(struct mt
-
- /* read out RX data */
- for (i = 0; i < rxlen; i++, idx--)
-- rx[i] = readb(mt8173_nor->base + MTK_NOR_SHREG(idx));
-+ rx[i] = readb(mtk_nor->base + MTK_NOR_SHREG(idx));
-
- return 0;
- }
-
- /* Do a WRSR (Write Status Register) command */
--static int mt8173_nor_wr_sr(struct mt8173_nor *mt8173_nor, u8 sr)
-+static int mtk_nor_wr_sr(struct mtk_nor *mtk_nor, u8 sr)
- {
-- writeb(sr, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
-- writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
-- return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WRSR_CMD);
-+ writeb(sr, mtk_nor->base + MTK_NOR_PRGDATA5_REG);
-+ writeb(8, mtk_nor->base + MTK_NOR_CNT_REG);
-+ return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WRSR_CMD);
- }
-
--static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
-+static int mtk_nor_write_buffer_enable(struct mtk_nor *mtk_nor)
- {
- u8 reg;
-
-@@ -216,27 +216,27 @@ static int mt8173_nor_write_buffer_enabl
- * 0: pre-fetch buffer use for read
- * 1: pre-fetch buffer use for page program
- */
-- writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
-- return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
-+ writel(MTK_NOR_WR_BUF_ENABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
-+ return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
- 0x01 == (reg & 0x01), 100, 10000);
- }
-
--static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
-+static int mtk_nor_write_buffer_disable(struct mtk_nor *mtk_nor)
- {
- u8 reg;
-
-- writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
-- return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
-+ writel(MTK_NOR_WR_BUF_DISABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
-+ return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
- MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100,
- 10000);
- }
-
--static void mt8173_nor_set_addr_width(struct mt8173_nor *mt8173_nor)
-+static void mtk_nor_set_addr_width(struct mtk_nor *mtk_nor)
- {
- u8 val;
-- struct spi_nor *nor = &mt8173_nor->nor;
-+ struct spi_nor *nor = &mtk_nor->nor;
-
-- val = readb(mt8173_nor->base + MTK_NOR_DUAL_REG);
-+ val = readb(mtk_nor->base + MTK_NOR_DUAL_REG);
-
- switch (nor->addr_width) {
- case 3:
-@@ -246,115 +246,115 @@ static void mt8173_nor_set_addr_width(st
- val |= MTK_NOR_4B_ADDR_EN;
- break;
- default:
-- dev_warn(mt8173_nor->dev, "Unexpected address width %u.\n",
-+ dev_warn(mtk_nor->dev, "Unexpected address width %u.\n",
- nor->addr_width);
- break;
- }
-
-- writeb(val, mt8173_nor->base + MTK_NOR_DUAL_REG);
-+ writeb(val, mtk_nor->base + MTK_NOR_DUAL_REG);
- }
-
--static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
-+static void mtk_nor_set_addr(struct mtk_nor *mtk_nor, u32 addr)
- {
- int i;
-
-- mt8173_nor_set_addr_width(mt8173_nor);
-+ mtk_nor_set_addr_width(mtk_nor);
-
- for (i = 0; i < 3; i++) {
-- writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4);
-+ writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR0_REG + i * 4);
- addr >>= 8;
- }
- /* Last register is non-contiguous */
-- writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG);
-+ writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR3_REG);
- }
-
--static ssize_t mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
-- u_char *buffer)
-+static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
-+ u_char *buffer)
- {
- int i, ret;
- int addr = (int)from;
- u8 *buf = (u8 *)buffer;
-- struct mt8173_nor *mt8173_nor = nor->priv;
-+ struct mtk_nor *mtk_nor = nor->priv;
-
- /* set mode for fast read mode ,dual mode or quad mode */
-- mt8173_nor_set_read_mode(mt8173_nor);
-- mt8173_nor_set_addr(mt8173_nor, addr);
-+ mtk_nor_set_read_mode(mtk_nor);
-+ mtk_nor_set_addr(mtk_nor, addr);
-
- for (i = 0; i < length; i++) {
-- ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD);
-+ ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_READ_CMD);
- if (ret < 0)
- return ret;
-- buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
-+ buf[i] = readb(mtk_nor->base + MTK_NOR_RDATA_REG);
- }
- return length;
- }
-
--static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
-- int addr, int length, u8 *data)
-+static int mtk_nor_write_single_byte(struct mtk_nor *mtk_nor,
-+ int addr, int length, u8 *data)
- {
- int i, ret;
-
-- mt8173_nor_set_addr(mt8173_nor, addr);
-+ mtk_nor_set_addr(mtk_nor, addr);
-
- for (i = 0; i < length; i++) {
-- writeb(*data++, mt8173_nor->base + MTK_NOR_WDATA_REG);
-- ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_WR_CMD);
-+ writeb(*data++, mtk_nor->base + MTK_NOR_WDATA_REG);
-+ ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_WR_CMD);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
-
--static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr,
-- const u8 *buf)
-+static int mtk_nor_write_buffer(struct mtk_nor *mtk_nor, int addr,
-+ const u8 *buf)
- {
- int i, bufidx, data;
-
-- mt8173_nor_set_addr(mt8173_nor, addr);
-+ mtk_nor_set_addr(mtk_nor, addr);
-
- bufidx = 0;
- for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) {
- data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 |
- buf[bufidx + 1]<<8 | buf[bufidx];
- bufidx += 4;
-- writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
-+ writel(data, mtk_nor->base + MTK_NOR_PP_DATA_REG);
- }
-- return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD);
-+ return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WR_CMD);
- }
-
--static ssize_t mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
-- const u_char *buf)
-+static ssize_t mtk_nor_write(struct spi_nor *nor, loff_t to, size_t len,
-+ const u_char *buf)
- {
- int ret;
-- struct mt8173_nor *mt8173_nor = nor->priv;
-+ struct mtk_nor *mtk_nor = nor->priv;
- size_t i;
-
-- ret = mt8173_nor_write_buffer_enable(mt8173_nor);
-+ ret = mtk_nor_write_buffer_enable(mtk_nor);
- if (ret < 0) {
-- dev_warn(mt8173_nor->dev, "write buffer enable failed!\n");
-+ dev_warn(mtk_nor->dev, "write buffer enable failed!\n");
- return ret;
- }
-
- for (i = 0; i + SFLASH_WRBUF_SIZE <= len; i += SFLASH_WRBUF_SIZE) {
-- ret = mt8173_nor_write_buffer(mt8173_nor, to, buf);
-+ ret = mtk_nor_write_buffer(mtk_nor, to, buf);
- if (ret < 0) {
-- dev_err(mt8173_nor->dev, "write buffer failed!\n");
-+ dev_err(mtk_nor->dev, "write buffer failed!\n");
- return ret;
- }
- to += SFLASH_WRBUF_SIZE;
- buf += SFLASH_WRBUF_SIZE;
- }
-- ret = mt8173_nor_write_buffer_disable(mt8173_nor);
-+ ret = mtk_nor_write_buffer_disable(mtk_nor);
- if (ret < 0) {
-- dev_warn(mt8173_nor->dev, "write buffer disable failed!\n");
-+ dev_warn(mtk_nor->dev, "write buffer disable failed!\n");
- return ret;
- }
-
- if (i < len) {
-- ret = mt8173_nor_write_single_byte(mt8173_nor, to,
-- (int)(len - i), (u8 *)buf);
-+ ret = mtk_nor_write_single_byte(mtk_nor, to,
-+ (int)(len - i), (u8 *)buf);
- if (ret < 0) {
-- dev_err(mt8173_nor->dev, "write single byte failed!\n");
-+ dev_err(mtk_nor->dev, "write single byte failed!\n");
- return ret;
- }
- }
-@@ -362,72 +362,72 @@ static ssize_t mt8173_nor_write(struct s
- return len;
- }
-
--static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
-+static int mtk_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
- {
- int ret;
-- struct mt8173_nor *mt8173_nor = nor->priv;
-+ struct mtk_nor *mtk_nor = nor->priv;
-
- switch (opcode) {
- case SPINOR_OP_RDSR:
-- ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD);
-+ ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_RDSR_CMD);
- if (ret < 0)
- return ret;
- if (len == 1)
-- *buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
-+ *buf = readb(mtk_nor->base + MTK_NOR_RDSR_REG);
- else
-- dev_err(mt8173_nor->dev, "len should be 1 for read status!\n");
-+ dev_err(mtk_nor->dev, "len should be 1 for read status!\n");
- break;
- default:
-- ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, NULL, 0, buf, len);
-+ ret = mtk_nor_do_tx_rx(mtk_nor, opcode, NULL, 0, buf, len);
- break;
- }
- return ret;
- }
-
--static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
-- int len)
-+static int mtk_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
-+ int len)
- {
- int ret;
-- struct mt8173_nor *mt8173_nor = nor->priv;
-+ struct mtk_nor *mtk_nor = nor->priv;
-
- switch (opcode) {
- case SPINOR_OP_WRSR:
- /* We only handle 1 byte */
-- ret = mt8173_nor_wr_sr(mt8173_nor, *buf);
-+ ret = mtk_nor_wr_sr(mtk_nor, *buf);
- break;
- default:
-- ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, buf, len, NULL, 0);
-+ ret = mtk_nor_do_tx_rx(mtk_nor, opcode, buf, len, NULL, 0);
- if (ret)
-- dev_warn(mt8173_nor->dev, "write reg failure!\n");
-+ dev_warn(mtk_nor->dev, "write reg failure!\n");
- break;
- }
- return ret;
- }
-
--static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor)
-+static void mtk_nor_disable_clk(struct mtk_nor *mtk_nor)
- {
-- clk_disable_unprepare(mt8173_nor->spi_clk);
-- clk_disable_unprepare(mt8173_nor->nor_clk);
-+ clk_disable_unprepare(mtk_nor->spi_clk);
-+ clk_disable_unprepare(mtk_nor->nor_clk);
- }
-
--static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor)
-+static int mtk_nor_enable_clk(struct mtk_nor *mtk_nor)
- {
- int ret;
-
-- ret = clk_prepare_enable(mt8173_nor->spi_clk);
-+ ret = clk_prepare_enable(mtk_nor->spi_clk);
- if (ret)
- return ret;
-
-- ret = clk_prepare_enable(mt8173_nor->nor_clk);
-+ ret = clk_prepare_enable(mtk_nor->nor_clk);
- if (ret) {
-- clk_disable_unprepare(mt8173_nor->spi_clk);
-+ clk_disable_unprepare(mtk_nor->spi_clk);
- return ret;
- }
-
- return 0;
- }
-
--static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
-+static int mtk_nor_init(struct mtk_nor *mtk_nor,
- struct device_node *flash_node)
- {
- const struct spi_nor_hwcaps hwcaps = {
-@@ -439,18 +439,18 @@ static int mtk_nor_init(struct mt8173_no
- struct spi_nor *nor;
-
- /* initialize controller to accept commands */
-- writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
-+ writel(MTK_NOR_ENABLE_SF_CMD, mtk_nor->base + MTK_NOR_WRPROT_REG);
-
-- nor = &mt8173_nor->nor;
-- nor->dev = mt8173_nor->dev;
-- nor->priv = mt8173_nor;
-+ nor = &mtk_nor->nor;
-+ nor->dev = mtk_nor->dev;
-+ nor->priv = mtk_nor;
- spi_nor_set_flash_node(nor, flash_node);
-
- /* fill the hooks to spi nor */
-- nor->read = mt8173_nor_read;
-- nor->read_reg = mt8173_nor_read_reg;
-- nor->write = mt8173_nor_write;
-- nor->write_reg = mt8173_nor_write_reg;
-+ nor->read = mtk_nor_read;
-+ nor->read_reg = mtk_nor_read_reg;
-+ nor->write = mtk_nor_write;
-+ nor->write_reg = mtk_nor_write_reg;
- nor->mtd.name = "mtk_nor";
- /* initialized with NULL */
- ret = spi_nor_scan(nor, NULL, &hwcaps);
-@@ -465,34 +465,34 @@ static int mtk_nor_drv_probe(struct plat
- struct device_node *flash_np;
- struct resource *res;
- int ret;
-- struct mt8173_nor *mt8173_nor;
-+ struct mtk_nor *mtk_nor;
-
- if (!pdev->dev.of_node) {
- dev_err(&pdev->dev, "No DT found\n");
- return -EINVAL;
- }
-
-- mt8173_nor = devm_kzalloc(&pdev->dev, sizeof(*mt8173_nor), GFP_KERNEL);
-- if (!mt8173_nor)
-+ mtk_nor = devm_kzalloc(&pdev->dev, sizeof(*mtk_nor), GFP_KERNEL);
-+ if (!mtk_nor)
- return -ENOMEM;
-- platform_set_drvdata(pdev, mt8173_nor);
-+ platform_set_drvdata(pdev, mtk_nor);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
-- if (IS_ERR(mt8173_nor->base))
-- return PTR_ERR(mt8173_nor->base);
-+ mtk_nor->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mtk_nor->base))
-+ return PTR_ERR(mtk_nor->base);
-
-- mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
-- if (IS_ERR(mt8173_nor->spi_clk))
-- return PTR_ERR(mt8173_nor->spi_clk);
-+ mtk_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
-+ if (IS_ERR(mtk_nor->spi_clk))
-+ return PTR_ERR(mtk_nor->spi_clk);
-
-- mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
-- if (IS_ERR(mt8173_nor->nor_clk))
-- return PTR_ERR(mt8173_nor->nor_clk);
-+ mtk_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
-+ if (IS_ERR(mtk_nor->nor_clk))
-+ return PTR_ERR(mtk_nor->nor_clk);
-
-- mt8173_nor->dev = &pdev->dev;
-+ mtk_nor->dev = &pdev->dev;
-
-- ret = mt8173_nor_enable_clk(mt8173_nor);
-+ ret = mtk_nor_enable_clk(mtk_nor);
- if (ret)
- return ret;
-
-@@ -503,20 +503,20 @@ static int mtk_nor_drv_probe(struct plat
- ret = -ENODEV;
- goto nor_free;
- }
-- ret = mtk_nor_init(mt8173_nor, flash_np);
-+ ret = mtk_nor_init(mtk_nor, flash_np);
-
- nor_free:
- if (ret)
-- mt8173_nor_disable_clk(mt8173_nor);
-+ mtk_nor_disable_clk(mtk_nor);
-
- return ret;
- }
-
- static int mtk_nor_drv_remove(struct platform_device *pdev)
- {
-- struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
-+ struct mtk_nor *mtk_nor = platform_get_drvdata(pdev);
-
-- mt8173_nor_disable_clk(mt8173_nor);
-+ mtk_nor_disable_clk(mtk_nor);
-
- return 0;
- }
-@@ -524,18 +524,18 @@ static int mtk_nor_drv_remove(struct pla
- #ifdef CONFIG_PM_SLEEP
- static int mtk_nor_suspend(struct device *dev)
- {
-- struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
-+ struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
-
-- mt8173_nor_disable_clk(mt8173_nor);
-+ mtk_nor_disable_clk(mtk_nor);
-
- return 0;
- }
-
- static int mtk_nor_resume(struct device *dev)
- {
-- struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
-+ struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
-
-- return mt8173_nor_enable_clk(mt8173_nor);
-+ return mtk_nor_enable_clk(mtk_nor);
- }
-
- static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
diff --git a/target/linux/mediatek/patches-4.14/0197-hwrng-mediatek-Setup-default-RNG-quality.patch b/target/linux/mediatek/patches-4.14/0197-hwrng-mediatek-Setup-default-RNG-quality.patch
deleted file mode 100644
index 71b097596d..0000000000
--- a/target/linux/mediatek/patches-4.14/0197-hwrng-mediatek-Setup-default-RNG-quality.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From cd4a7d700a148f89d599ebe53fd97dc64193683a Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 10 Jan 2018 12:02:46 +0800
-Subject: [PATCH 197/224] hwrng: mediatek - Setup default RNG quality
-
-When hw_random device's quality is non-zero, it will automatically fill
-the kernel's entropy pool at boot. For the purpose, one conservative
-quality value is being picked up as the default value.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/char/hw_random/mtk-rng.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/char/hw_random/mtk-rng.c
-+++ b/drivers/char/hw_random/mtk-rng.c
-@@ -135,6 +135,7 @@ static int mtk_rng_probe(struct platform
- #endif
- priv->rng.read = mtk_rng_read;
- priv->rng.priv = (unsigned long)&pdev->dev;
-+ priv->rng.quality = 900;
-
- priv->clk = devm_clk_get(&pdev->dev, "rng");
- if (IS_ERR(priv->clk)) {
diff --git a/target/linux/mediatek/patches-4.14/0198-dt-bindings-thermal-add-binding-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0198-dt-bindings-thermal-add-binding-for-MT7622-SoC.patch
deleted file mode 100644
index a16e01b10f..0000000000
--- a/target/linux/mediatek/patches-4.14/0198-dt-bindings-thermal-add-binding-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From bdaa6312375055d3e104869ca04cc463ac0a33d1 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 17 Jan 2018 00:00:39 +0800
-Subject: [PATCH 198/224] dt-bindings: thermal: add binding for MT7622 SoC
-
-Add devicetree bindings for MediaTek MT7622 thermal controller
-
-Changes v1 -> v2: add tag from Rob
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-@@ -12,6 +12,7 @@ Required properties:
- - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
- - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
-+ - "mediatek,mt7622-thermal" : For MT7622 SoC
- - reg: Address range of the thermal controller
- - interrupts: IRQ for the thermal controller
- - clocks, clock-names: Clocks needed for the thermal controller. required
diff --git a/target/linux/mediatek/patches-4.14/0199-thermal-mtk-Cleanup-unused-defines.patch b/target/linux/mediatek/patches-4.14/0199-thermal-mtk-Cleanup-unused-defines.patch
deleted file mode 100644
index af910a6660..0000000000
--- a/target/linux/mediatek/patches-4.14/0199-thermal-mtk-Cleanup-unused-defines.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 8bf9b7eeef3f5f4866d66878db75b6b944a8eab4 Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <matthias.bgg@gmail.com>
-Date: Fri, 1 Dec 2017 11:43:21 +0100
-Subject: [PATCH 199/224] thermal: mtk: Cleanup unused defines
-
-The mtk_thermal has some defiens which are never used within the driver.
-This patch delets them.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
----
- drivers/thermal/mtk_thermal.c | 9 +--------
- 1 file changed, 1 insertion(+), 8 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -32,15 +32,10 @@
- #include <linux/types.h>
-
- /* AUXADC Registers */
--#define AUXADC_CON0_V 0x000
--#define AUXADC_CON1_V 0x004
- #define AUXADC_CON1_SET_V 0x008
- #define AUXADC_CON1_CLR_V 0x00c
- #define AUXADC_CON2_V 0x010
- #define AUXADC_DATA(channel) (0x14 + (channel) * 4)
--#define AUXADC_MISC_V 0x094
--
--#define AUXADC_CON1_CHANNEL(x) BIT(x)
-
- #define APMIXED_SYS_TS_CON1 0x604
-
-@@ -158,8 +153,6 @@
- /* The number of sensing points per bank */
- #define MT2712_NUM_SENSORS_PER_ZONE 4
-
--#define THERMAL_NAME "mtk-thermal"
--
- struct mtk_thermal;
-
- struct thermal_bank_cfg {
-@@ -767,7 +760,7 @@ static struct platform_driver mtk_therma
- .probe = mtk_thermal_probe,
- .remove = mtk_thermal_remove,
- .driver = {
-- .name = THERMAL_NAME,
-+ .name = "mtk-thermal",
- .of_match_table = mtk_thermal_of_match,
- },
- };
diff --git a/target/linux/mediatek/patches-4.14/0200-thermal-mediatek-add-support-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0200-thermal-mediatek-add-support-for-MT7622-SoC.patch
deleted file mode 100644
index 1dc293641e..0000000000
--- a/target/linux/mediatek/patches-4.14/0200-thermal-mediatek-add-support-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From b93889b200a963acde20e559dbf51886ad6b6229 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Tue, 16 Jan 2018 23:50:48 +0800
-Subject: [PATCH 200/224] thermal: mediatek: add support for MT7622 SoC
-
-MT7622 SoC has built-in thermal controller with one sensing point, the
-patch just is to extend the functionality of the existing logic.
-
-Changes v1 -> v2: rebase to 4.16-rc1
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
----
- drivers/thermal/mtk_thermal.c | 35 +++++++++++++++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -153,6 +153,12 @@
- /* The number of sensing points per bank */
- #define MT2712_NUM_SENSORS_PER_ZONE 4
-
-+#define MT7622_TEMP_AUXADC_CHANNEL 11
-+#define MT7622_NUM_SENSORS 1
-+#define MT7622_NUM_ZONES 1
-+#define MT7622_NUM_SENSORS_PER_ZONE 1
-+#define MT7622_TS1 0
-+
- struct mtk_thermal;
-
- struct thermal_bank_cfg {
-@@ -242,6 +248,12 @@ static const int mt2712_adcpnp[MT2712_NU
-
- static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
-
-+/* MT7622 thermal sensor data */
-+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
-+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
-+
- /**
- * The MT8173 thermal controller has four banks. Each bank can read up to
- * four temperature sensors simultaneously. The MT8173 has a total of 5
-@@ -329,6 +341,25 @@ static const struct mtk_thermal_data mt2
- .sensor_mux_values = mt2712_mux_values,
- };
-
-+/*
-+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
-+ * access.
-+ */
-+static const struct mtk_thermal_data mt7622_thermal_data = {
-+ .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT7622_NUM_ZONES,
-+ .num_sensors = MT7622_NUM_SENSORS,
-+ .bank_data = {
-+ {
-+ .num_sensors = 1,
-+ .sensors = mt7622_bank_data,
-+ },
-+ },
-+ .msr = mt7622_msr,
-+ .adcpnp = mt7622_adcpnp,
-+ .sensor_mux_values = mt7622_mux_values,
-+};
-+
- /**
- * raw_to_mcelsius - convert a raw ADC value to mcelsius
- * @mt: The thermal controller
-@@ -633,6 +664,10 @@ static const struct of_device_id mtk_the
- {
- .compatible = "mediatek,mt2712-thermal",
- .data = (void *)&mt2712_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt7622-thermal",
-+ .data = (void *)&mt7622_thermal_data,
- }, {
- },
- };
diff --git a/target/linux/mediatek/patches-4.14/0201-dt-bindings-clock-mediatek-add-missing-required-rese.patch b/target/linux/mediatek/patches-4.14/0201-dt-bindings-clock-mediatek-add-missing-required-rese.patch
deleted file mode 100644
index 6f22dc2411..0000000000
--- a/target/linux/mediatek/patches-4.14/0201-dt-bindings-clock-mediatek-add-missing-required-rese.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 4a1990ee249df257848f9583cef71478e3411c3e Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 11:24:45 +0800
-Subject: [PATCH 201/224] dt-bindings: clock: mediatek: add missing required
- #reset-cells
-
-All ethsys, pciesys and ssusbsys internally include reset controller, so
-explicitly add back these missing cell definitions to related bindings
-and examples.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Rob Herring <robh@kernel.org>
-Cc: Michael Turquette <mturquette@baylibre.com>
-Cc: Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-clk@vger.kernel.org
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1 +
- Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
- Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
- 3 files changed, 5 insertions(+)
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-@@ -9,6 +9,7 @@ Required Properties:
- - "mediatek,mt2701-ethsys", "syscon"
- - "mediatek,mt7622-ethsys", "syscon"
- - #clock-cells: Must be 1
-+- #reset-cells: Must be 1
-
- The ethsys controller uses the common clk binding from
- Documentation/devicetree/bindings/clock/clock-bindings.txt
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
-@@ -8,6 +8,7 @@ Required Properties:
- - compatible: Should be:
- - "mediatek,mt7622-pciesys", "syscon"
- - #clock-cells: Must be 1
-+- #reset-cells: Must be 1
-
- The PCIESYS controller uses the common clk binding from
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-@@ -19,4 +20,5 @@ pciesys: pciesys@1a100800 {
- compatible = "mediatek,mt7622-pciesys", "syscon";
- reg = <0 0x1a100800 0 0x1000>;
- #clock-cells = <1>;
-+ #reset-cells = <1>;
- };
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
-@@ -8,6 +8,7 @@ Required Properties:
- - compatible: Should be:
- - "mediatek,mt7622-ssusbsys", "syscon"
- - #clock-cells: Must be 1
-+- #reset-cells: Must be 1
-
- The SSUSBSYS controller uses the common clk binding from
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-@@ -19,4 +20,5 @@ ssusbsys: ssusbsys@1a000000 {
- compatible = "mediatek,mt7622-ssusbsys", "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
-+ #reset-cells = <1>;
- };
diff --git a/target/linux/mediatek/patches-4.14/0202-mmc-dt-bindings-add-support-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0202-mmc-dt-bindings-add-support-for-MT7622-SoC.patch
deleted file mode 100644
index 0e641b475b..0000000000
--- a/target/linux/mediatek/patches-4.14/0202-mmc-dt-bindings-add-support-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 5365d402c8c4f0ff2cf2f26cfb8f46b520719ac0 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 5 Mar 2018 14:47:26 +0800
-Subject: [PATCH 202/224] mmc: dt-bindings: add support for MT7622 SoC
-
-Add the devicetree binding for MT7622 SoC
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
-@@ -12,6 +12,7 @@ Required properties:
- "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
- "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
- "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
-+ "mediatek,mt7622-mmc": for MT7622 SoC
- "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
-
- - reg: physical base address of the controller and length
diff --git a/target/linux/mediatek/patches-4.14/0203-mmc-mediatek-add-support-for-MT7622-SoC.patch b/target/linux/mediatek/patches-4.14/0203-mmc-mediatek-add-support-for-MT7622-SoC.patch
deleted file mode 100644
index 39ecd8786a..0000000000
--- a/target/linux/mediatek/patches-4.14/0203-mmc-mediatek-add-support-for-MT7622-SoC.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 9af606beb87182120ab40563cd596a9e1cfc842b Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 2 Feb 2018 14:25:11 +0800
-Subject: [PATCH 203/224] mmc: mediatek: add support for MT7622 SoC
-
-Just applying the existing logic and adding its own characteristics into
-the space pointed by an extra entry of struct of_device_id to have support
-of MT7622 SoC.
-
-Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Tested-by: Jumin Li <jumin.li@mediatek.com>
----
- drivers/mmc/host/mtk-sd.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -440,11 +440,23 @@ static const struct mtk_mmc_compatible m
- .enhance_rx = true,
- };
-
-+static const struct mtk_mmc_compatible mt7622_compat = {
-+ .clk_div_bits = 12,
-+ .hs400_tune = false,
-+ .pad_tune_reg = MSDC_PAD_TUNE0,
-+ .async_fifo = true,
-+ .data_tune = true,
-+ .busy_check = true,
-+ .stop_clk_fix = true,
-+ .enhance_rx = true,
-+};
-+
- static const struct of_device_id msdc_of_ids[] = {
- { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
- { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
- { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
- { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
-+ { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
- {}
- };
- MODULE_DEVICE_TABLE(of, msdc_of_ids);
diff --git a/target/linux/mediatek/patches-4.14/0204-dt-bindings-dmaengine-Add-MediaTek-High-Speed-DMA-co.patch b/target/linux/mediatek/patches-4.14/0204-dt-bindings-dmaengine-Add-MediaTek-High-Speed-DMA-co.patch
deleted file mode 100644
index b05903e9ed..0000000000
--- a/target/linux/mediatek/patches-4.14/0204-dt-bindings-dmaengine-Add-MediaTek-High-Speed-DMA-co.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 71198859668501ef57450be07da77e9544f59f1e Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Sat, 13 May 2017 15:16:58 +0800
-Subject: [PATCH 204/224] dt-bindings: dmaengine: Add MediaTek High-Speed DMA
- controller bindings
-
-Document the devicetree bindings for MediaTek High-Speed DMA controller
-which could be found on MT7623 SoC or other similar Mediatek SoCs.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- .../devicetree/bindings/dma/mtk-hsdma.txt | 33 ++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/dma/mtk-hsdma.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
-@@ -0,0 +1,33 @@
-+MediaTek High-Speed DMA Controller
-+==================================
-+
-+This device follows the generic DMA bindings defined in dma/dma.txt.
-+
-+Required properties:
-+
-+- compatible: Must be one of
-+ "mediatek,mt7622-hsdma": for MT7622 SoC
-+ "mediatek,mt7623-hsdma": for MT7623 SoC
-+- reg: Should contain the register's base address and length.
-+- interrupts: Should contain a reference to the interrupt used by this
-+ device.
-+- clocks: Should be the clock specifiers corresponding to the entry in
-+ clock-names property.
-+- clock-names: Should contain "hsdma" entries.
-+- power-domains: Phandle to the power domain that the device is part of
-+- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
-+ in dmas property of a client device represents the channel
-+ number.
-+Example:
-+
-+ hsdma: dma-controller@1b007000 {
-+ compatible = "mediatek,mt7623-hsdma";
-+ reg = <0 0x1b007000 0 0x1000>;
-+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-+ clock-names = "hsdma";
-+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-+ #dma-cells = <1>;
-+ };
-+
-+DMA clients must use the format described in dma/dma.txt file.
diff --git a/target/linux/mediatek/patches-4.14/0205-dmaengine-mediatek-Add-MediaTek-High-Speed-DMA-contr.patch b/target/linux/mediatek/patches-4.14/0205-dmaengine-mediatek-Add-MediaTek-High-Speed-DMA-contr.patch
deleted file mode 100644
index 6fd4cdef48..0000000000
--- a/target/linux/mediatek/patches-4.14/0205-dmaengine-mediatek-Add-MediaTek-High-Speed-DMA-contr.patch
+++ /dev/null
@@ -1,1128 +0,0 @@
-From 2b97c5d7886a920adc8f7c32c2a60583475654f2 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 12 May 2017 17:05:12 +0800
-Subject: [PATCH 205/224] dmaengine: mediatek: Add MediaTek High-Speed DMA
- controller for MT7622 and MT7623 SoC
-
-MediaTek High-Speed DMA controller (HSDMA) on MT7622 and MT7623 SoC has
-a single ring is dedicated to memory-to-memory transfer through ring based
-descriptor management.
-
-Even though there is only one physical ring available inside HSDMA, the
-driver can be easily extended to the support of multiple virtual channels
-processing simultaneously by means of DMA_VIRTUAL_CHANNELS effort.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Randy Dunlap <rdunlap@infradead.org>
-Cc: Fengguang Wu <fengguang.wu@intel.com>
-Cc: Julia Lawall <julia.lawall@lip6.fr>
----
- drivers/dma/Kconfig | 2 +
- drivers/dma/Makefile | 1 +
- drivers/dma/mediatek/Kconfig | 13 +
- drivers/dma/mediatek/Makefile | 1 +
- drivers/dma/mediatek/mtk-hsdma.c | 1056 ++++++++++++++++++++++++++++++++++++++
- 5 files changed, 1073 insertions(+)
- create mode 100644 drivers/dma/mediatek/Kconfig
- create mode 100644 drivers/dma/mediatek/Makefile
- create mode 100644 drivers/dma/mediatek/mtk-hsdma.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -604,6 +604,8 @@ config ZX_DMA
- # driver files
- source "drivers/dma/bestcomm/Kconfig"
-
-+source "drivers/dma/mediatek/Kconfig"
-+
- source "drivers/dma/qcom/Kconfig"
-
- source "drivers/dma/dw/Kconfig"
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -72,5 +72,6 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx_dma.o
- obj-$(CONFIG_ST_FDMA) += st_fdma.o
-
-+obj-y += mediatek/
- obj-y += qcom/
- obj-y += xilinx/
---- /dev/null
-+++ b/drivers/dma/mediatek/Kconfig
-@@ -0,0 +1,13 @@
-+
-+config MTK_HSDMA
-+ tristate "MediaTek High-Speed DMA controller support"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+ ---help---
-+ Enable support for High-Speed DMA controller on MediaTek
-+ SoCs.
-+
-+ This controller provides the channels which is dedicated to
-+ memory-to-memory transfer to offload from CPU through ring-
-+ based descriptor management.
---- /dev/null
-+++ b/drivers/dma/mediatek/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
---- /dev/null
-+++ b/drivers/dma/mediatek/mtk-hsdma.c
-@@ -0,0 +1,1056 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright (c) 2017-2018 MediaTek Inc.
-+
-+/*
-+ * Driver for MediaTek High-Speed DMA Controller
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/clk.h>
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/iopoll.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/of_dma.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/refcount.h>
-+#include <linux/slab.h>
-+
-+#include "../virt-dma.h"
-+
-+#define MTK_HSDMA_USEC_POLL 20
-+#define MTK_HSDMA_TIMEOUT_POLL 200000
-+#define MTK_HSDMA_DMA_BUSWIDTHS BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)
-+
-+/* The default number of virtual channel */
-+#define MTK_HSDMA_NR_VCHANS 3
-+
-+/* Only one physical channel supported */
-+#define MTK_HSDMA_NR_MAX_PCHANS 1
-+
-+/* Macro for physical descriptor (PD) manipulation */
-+/* The number of PD which must be 2 of power */
-+#define MTK_DMA_SIZE 64
-+#define MTK_HSDMA_NEXT_DESP_IDX(x, y) (((x) + 1) & ((y) - 1))
-+#define MTK_HSDMA_LAST_DESP_IDX(x, y) (((x) - 1) & ((y) - 1))
-+#define MTK_HSDMA_MAX_LEN 0x3f80
-+#define MTK_HSDMA_ALIGN_SIZE 4
-+#define MTK_HSDMA_PLEN_MASK 0x3fff
-+#define MTK_HSDMA_DESC_PLEN(x) (((x) & MTK_HSDMA_PLEN_MASK) << 16)
-+#define MTK_HSDMA_DESC_PLEN_GET(x) (((x) >> 16) & MTK_HSDMA_PLEN_MASK)
-+
-+/* Registers for underlying ring manipulation */
-+#define MTK_HSDMA_TX_BASE 0x0
-+#define MTK_HSDMA_TX_CNT 0x4
-+#define MTK_HSDMA_TX_CPU 0x8
-+#define MTK_HSDMA_TX_DMA 0xc
-+#define MTK_HSDMA_RX_BASE 0x100
-+#define MTK_HSDMA_RX_CNT 0x104
-+#define MTK_HSDMA_RX_CPU 0x108
-+#define MTK_HSDMA_RX_DMA 0x10c
-+
-+/* Registers for global setup */
-+#define MTK_HSDMA_GLO 0x204
-+#define MTK_HSDMA_GLO_MULTI_DMA BIT(10)
-+#define MTK_HSDMA_TX_WB_DDONE BIT(6)
-+#define MTK_HSDMA_BURST_64BYTES (0x2 << 4)
-+#define MTK_HSDMA_GLO_RX_BUSY BIT(3)
-+#define MTK_HSDMA_GLO_RX_DMA BIT(2)
-+#define MTK_HSDMA_GLO_TX_BUSY BIT(1)
-+#define MTK_HSDMA_GLO_TX_DMA BIT(0)
-+#define MTK_HSDMA_GLO_DMA (MTK_HSDMA_GLO_TX_DMA | \
-+ MTK_HSDMA_GLO_RX_DMA)
-+#define MTK_HSDMA_GLO_BUSY (MTK_HSDMA_GLO_RX_BUSY | \
-+ MTK_HSDMA_GLO_TX_BUSY)
-+#define MTK_HSDMA_GLO_DEFAULT (MTK_HSDMA_GLO_TX_DMA | \
-+ MTK_HSDMA_GLO_RX_DMA | \
-+ MTK_HSDMA_TX_WB_DDONE | \
-+ MTK_HSDMA_BURST_64BYTES | \
-+ MTK_HSDMA_GLO_MULTI_DMA)
-+
-+/* Registers for reset */
-+#define MTK_HSDMA_RESET 0x208
-+#define MTK_HSDMA_RST_TX BIT(0)
-+#define MTK_HSDMA_RST_RX BIT(16)
-+
-+/* Registers for interrupt control */
-+#define MTK_HSDMA_DLYINT 0x20c
-+#define MTK_HSDMA_RXDLY_INT_EN BIT(15)
-+
-+/* Interrupt fires when the pending number's more than the specified */
-+#define MTK_HSDMA_RXMAX_PINT(x) (((x) & 0x7f) << 8)
-+
-+/* Interrupt fires when the pending time's more than the specified in 20 us */
-+#define MTK_HSDMA_RXMAX_PTIME(x) ((x) & 0x7f)
-+#define MTK_HSDMA_DLYINT_DEFAULT (MTK_HSDMA_RXDLY_INT_EN | \
-+ MTK_HSDMA_RXMAX_PINT(20) | \
-+ MTK_HSDMA_RXMAX_PTIME(20))
-+#define MTK_HSDMA_INT_STATUS 0x220
-+#define MTK_HSDMA_INT_ENABLE 0x228
-+#define MTK_HSDMA_INT_RXDONE BIT(16)
-+
-+enum mtk_hsdma_vdesc_flag {
-+ MTK_HSDMA_VDESC_FINISHED = 0x01,
-+};
-+
-+#define IS_MTK_HSDMA_VDESC_FINISHED(x) ((x) == MTK_HSDMA_VDESC_FINISHED)
-+
-+/**
-+ * struct mtk_hsdma_pdesc - This is the struct holding info describing physical
-+ * descriptor (PD) and its placement must be kept at
-+ * 4-bytes alignment in little endian order.
-+ * @desc[1-4]: The control pad used to indicate hardware how to
-+ * deal with the descriptor such as source and
-+ * destination address and data length. The maximum
-+ * data length each pdesc can handle is 0x3f80 bytes
-+ */
-+struct mtk_hsdma_pdesc {
-+ __le32 desc1;
-+ __le32 desc2;
-+ __le32 desc3;
-+ __le32 desc4;
-+} __packed __aligned(4);
-+
-+/**
-+ * struct mtk_hsdma_vdesc - This is the struct holding info describing virtual
-+ * descriptor (VD)
-+ * @vd: An instance for struct virt_dma_desc
-+ * @len: The total data size device wants to move
-+ * @residue: The remaining data size device will move
-+ * @dest: The destination address device wants to move to
-+ * @src: The source address device wants to move from
-+ */
-+struct mtk_hsdma_vdesc {
-+ struct virt_dma_desc vd;
-+ size_t len;
-+ size_t residue;
-+ dma_addr_t dest;
-+ dma_addr_t src;
-+};
-+
-+/**
-+ * struct mtk_hsdma_cb - This is the struct holding extra info required for RX
-+ * ring to know what relevant VD the the PD is being
-+ * mapped to.
-+ * @vd: Pointer to the relevant VD.
-+ * @flag: Flag indicating what action should be taken when VD
-+ * is completed.
-+ */
-+struct mtk_hsdma_cb {
-+ struct virt_dma_desc *vd;
-+ enum mtk_hsdma_vdesc_flag flag;
-+};
-+
-+/**
-+ * struct mtk_hsdma_ring - This struct holds info describing underlying ring
-+ * space
-+ * @txd: The descriptor TX ring which describes DMA source
-+ * information
-+ * @rxd: The descriptor RX ring which describes DMA
-+ * destination information
-+ * @cb: The extra information pointed at by RX ring
-+ * @tphys: The physical addr of TX ring
-+ * @rphys: The physical addr of RX ring
-+ * @cur_tptr: Pointer to the next free descriptor used by the host
-+ * @cur_rptr: Pointer to the last done descriptor by the device
-+ */
-+struct mtk_hsdma_ring {
-+ struct mtk_hsdma_pdesc *txd;
-+ struct mtk_hsdma_pdesc *rxd;
-+ struct mtk_hsdma_cb *cb;
-+ dma_addr_t tphys;
-+ dma_addr_t rphys;
-+ u16 cur_tptr;
-+ u16 cur_rptr;
-+};
-+
-+/**
-+ * struct mtk_hsdma_pchan - This is the struct holding info describing physical
-+ * channel (PC)
-+ * @ring: An instance for the underlying ring
-+ * @sz_ring: Total size allocated for the ring
-+ * @nr_free: Total number of free rooms in the ring. It would
-+ * be accessed and updated frequently between IRQ
-+ * context and user context to reflect whether ring
-+ * can accept requests from VD.
-+ */
-+struct mtk_hsdma_pchan {
-+ struct mtk_hsdma_ring ring;
-+ size_t sz_ring;
-+ atomic_t nr_free;
-+};
-+
-+/**
-+ * struct mtk_hsdma_vchan - This is the struct holding info describing virtual
-+ * channel (VC)
-+ * @vc: An instance for struct virt_dma_chan
-+ * @issue_completion: The wait for all issued descriptors completited
-+ * @issue_synchronize: Bool indicating channel synchronization starts
-+ * @desc_hw_processing: List those descriptors the hardware is processing,
-+ * which is protected by vc.lock
-+ */
-+struct mtk_hsdma_vchan {
-+ struct virt_dma_chan vc;
-+ struct completion issue_completion;
-+ bool issue_synchronize;
-+ struct list_head desc_hw_processing;
-+};
-+
-+/**
-+ * struct mtk_hsdma_soc - This is the struct holding differences among SoCs
-+ * @ddone: Bit mask for DDONE
-+ * @ls0: Bit mask for LS0
-+ */
-+struct mtk_hsdma_soc {
-+ __le32 ddone;
-+ __le32 ls0;
-+};
-+
-+/**
-+ * struct mtk_hsdma_device - This is the struct holding info describing HSDMA
-+ * device
-+ * @ddev: An instance for struct dma_device
-+ * @base: The mapped register I/O base
-+ * @clk: The clock that device internal is using
-+ * @irq: The IRQ that device are using
-+ * @dma_requests: The number of VCs the device supports to
-+ * @vc: The pointer to all available VCs
-+ * @pc: The pointer to the underlying PC
-+ * @pc_refcnt: Track how many VCs are using the PC
-+ * @lock: Lock protect agaisting multiple VCs access PC
-+ * @soc: The pointer to area holding differences among
-+ * vaious platform
-+ */
-+struct mtk_hsdma_device {
-+ struct dma_device ddev;
-+ void __iomem *base;
-+ struct clk *clk;
-+ u32 irq;
-+
-+ u32 dma_requests;
-+ struct mtk_hsdma_vchan *vc;
-+ struct mtk_hsdma_pchan *pc;
-+ refcount_t pc_refcnt;
-+
-+ /* Lock used to protect against multiple VCs access PC */
-+ spinlock_t lock;
-+
-+ const struct mtk_hsdma_soc *soc;
-+};
-+
-+static struct mtk_hsdma_device *to_hsdma_dev(struct dma_chan *chan)
-+{
-+ return container_of(chan->device, struct mtk_hsdma_device, ddev);
-+}
-+
-+static inline struct mtk_hsdma_vchan *to_hsdma_vchan(struct dma_chan *chan)
-+{
-+ return container_of(chan, struct mtk_hsdma_vchan, vc.chan);
-+}
-+
-+static struct mtk_hsdma_vdesc *to_hsdma_vdesc(struct virt_dma_desc *vd)
-+{
-+ return container_of(vd, struct mtk_hsdma_vdesc, vd);
-+}
-+
-+static struct device *hsdma2dev(struct mtk_hsdma_device *hsdma)
-+{
-+ return hsdma->ddev.dev;
-+}
-+
-+static u32 mtk_dma_read(struct mtk_hsdma_device *hsdma, u32 reg)
-+{
-+ return readl(hsdma->base + reg);
-+}
-+
-+static void mtk_dma_write(struct mtk_hsdma_device *hsdma, u32 reg, u32 val)
-+{
-+ writel(val, hsdma->base + reg);
-+}
-+
-+static void mtk_dma_rmw(struct mtk_hsdma_device *hsdma, u32 reg,
-+ u32 mask, u32 set)
-+{
-+ u32 val;
-+
-+ val = mtk_dma_read(hsdma, reg);
-+ val &= ~mask;
-+ val |= set;
-+ mtk_dma_write(hsdma, reg, val);
-+}
-+
-+static void mtk_dma_set(struct mtk_hsdma_device *hsdma, u32 reg, u32 val)
-+{
-+ mtk_dma_rmw(hsdma, reg, 0, val);
-+}
-+
-+static void mtk_dma_clr(struct mtk_hsdma_device *hsdma, u32 reg, u32 val)
-+{
-+ mtk_dma_rmw(hsdma, reg, val, 0);
-+}
-+
-+static void mtk_hsdma_vdesc_free(struct virt_dma_desc *vd)
-+{
-+ kfree(container_of(vd, struct mtk_hsdma_vdesc, vd));
-+}
-+
-+static int mtk_hsdma_busy_wait(struct mtk_hsdma_device *hsdma)
-+{
-+ u32 status = 0;
-+
-+ return readl_poll_timeout(hsdma->base + MTK_HSDMA_GLO, status,
-+ !(status & MTK_HSDMA_GLO_BUSY),
-+ MTK_HSDMA_USEC_POLL,
-+ MTK_HSDMA_TIMEOUT_POLL);
-+}
-+
-+static int mtk_hsdma_alloc_pchan(struct mtk_hsdma_device *hsdma,
-+ struct mtk_hsdma_pchan *pc)
-+{
-+ struct mtk_hsdma_ring *ring = &pc->ring;
-+ int err;
-+
-+ memset(pc, 0, sizeof(*pc));
-+
-+ /*
-+ * Allocate ring space where [0 ... MTK_DMA_SIZE - 1] is for TX ring
-+ * and [MTK_DMA_SIZE ... 2 * MTK_DMA_SIZE - 1] is for RX ring.
-+ */
-+ pc->sz_ring = 2 * MTK_DMA_SIZE * sizeof(*ring->txd);
-+ ring->txd = dma_zalloc_coherent(hsdma2dev(hsdma), pc->sz_ring,
-+ &ring->tphys, GFP_NOWAIT);
-+ if (!ring->txd)
-+ return -ENOMEM;
-+
-+ ring->rxd = &ring->txd[MTK_DMA_SIZE];
-+ ring->rphys = ring->tphys + MTK_DMA_SIZE * sizeof(*ring->txd);
-+ ring->cur_tptr = 0;
-+ ring->cur_rptr = MTK_DMA_SIZE - 1;
-+
-+ ring->cb = kcalloc(MTK_DMA_SIZE, sizeof(*ring->cb), GFP_NOWAIT);
-+ if (!ring->cb) {
-+ err = -ENOMEM;
-+ goto err_free_dma;
-+ }
-+
-+ atomic_set(&pc->nr_free, MTK_DMA_SIZE - 1);
-+
-+ /* Disable HSDMA and wait for the completion */
-+ mtk_dma_clr(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DMA);
-+ err = mtk_hsdma_busy_wait(hsdma);
-+ if (err)
-+ goto err_free_cb;
-+
-+ /* Reset */
-+ mtk_dma_set(hsdma, MTK_HSDMA_RESET,
-+ MTK_HSDMA_RST_TX | MTK_HSDMA_RST_RX);
-+ mtk_dma_clr(hsdma, MTK_HSDMA_RESET,
-+ MTK_HSDMA_RST_TX | MTK_HSDMA_RST_RX);
-+
-+ /* Setup HSDMA initial pointer in the ring */
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_BASE, ring->tphys);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_CNT, MTK_DMA_SIZE);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_CPU, ring->cur_tptr);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_DMA, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_BASE, ring->rphys);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_CNT, MTK_DMA_SIZE);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_CPU, ring->cur_rptr);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_DMA, 0);
-+
-+ /* Enable HSDMA */
-+ mtk_dma_set(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DMA);
-+
-+ /* Setup delayed interrupt */
-+ mtk_dma_write(hsdma, MTK_HSDMA_DLYINT, MTK_HSDMA_DLYINT_DEFAULT);
-+
-+ /* Enable interrupt */
-+ mtk_dma_set(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
-+
-+ return 0;
-+
-+err_free_cb:
-+ kfree(ring->cb);
-+
-+err_free_dma:
-+ dma_free_coherent(hsdma2dev(hsdma),
-+ pc->sz_ring, ring->txd, ring->tphys);
-+ return err;
-+}
-+
-+static void mtk_hsdma_free_pchan(struct mtk_hsdma_device *hsdma,
-+ struct mtk_hsdma_pchan *pc)
-+{
-+ struct mtk_hsdma_ring *ring = &pc->ring;
-+
-+ /* Disable HSDMA and then wait for the completion */
-+ mtk_dma_clr(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DMA);
-+ mtk_hsdma_busy_wait(hsdma);
-+
-+ /* Reset pointer in the ring */
-+ mtk_dma_clr(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_BASE, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_CNT, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_CPU, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_BASE, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_CNT, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_CPU, MTK_DMA_SIZE - 1);
-+
-+ kfree(ring->cb);
-+
-+ dma_free_coherent(hsdma2dev(hsdma),
-+ pc->sz_ring, ring->txd, ring->tphys);
-+}
-+
-+static int mtk_hsdma_issue_pending_vdesc(struct mtk_hsdma_device *hsdma,
-+ struct mtk_hsdma_pchan *pc,
-+ struct mtk_hsdma_vdesc *hvd)
-+{
-+ struct mtk_hsdma_ring *ring = &pc->ring;
-+ struct mtk_hsdma_pdesc *txd, *rxd;
-+ u16 reserved, prev, tlen, num_sgs;
-+ unsigned long flags;
-+
-+ /* Protect against PC is accessed by multiple VCs simultaneously */
-+ spin_lock_irqsave(&hsdma->lock, flags);
-+
-+ /*
-+ * Reserve rooms, where pc->nr_free is used to track how many free
-+ * rooms in the ring being updated in user and IRQ context.
-+ */
-+ num_sgs = DIV_ROUND_UP(hvd->len, MTK_HSDMA_MAX_LEN);
-+ reserved = min_t(u16, num_sgs, atomic_read(&pc->nr_free));
-+
-+ if (!reserved) {
-+ spin_unlock_irqrestore(&hsdma->lock, flags);
-+ return -ENOSPC;
-+ }
-+
-+ atomic_sub(reserved, &pc->nr_free);
-+
-+ while (reserved--) {
-+ /* Limit size by PD capability for valid data moving */
-+ tlen = (hvd->len > MTK_HSDMA_MAX_LEN) ?
-+ MTK_HSDMA_MAX_LEN : hvd->len;
-+
-+ /*
-+ * Setup PDs using the remaining VD info mapped on those
-+ * reserved rooms. And since RXD is shared memory between the
-+ * host and the device allocated by dma_alloc_coherent call,
-+ * the helper macro WRITE_ONCE can ensure the data written to
-+ * RAM would really happens.
-+ */
-+ txd = &ring->txd[ring->cur_tptr];
-+ WRITE_ONCE(txd->desc1, hvd->src);
-+ WRITE_ONCE(txd->desc2,
-+ hsdma->soc->ls0 | MTK_HSDMA_DESC_PLEN(tlen));
-+
-+ rxd = &ring->rxd[ring->cur_tptr];
-+ WRITE_ONCE(rxd->desc1, hvd->dest);
-+ WRITE_ONCE(rxd->desc2, MTK_HSDMA_DESC_PLEN(tlen));
-+
-+ /* Associate VD, the PD belonged to */
-+ ring->cb[ring->cur_tptr].vd = &hvd->vd;
-+
-+ /* Move forward the pointer of TX ring */
-+ ring->cur_tptr = MTK_HSDMA_NEXT_DESP_IDX(ring->cur_tptr,
-+ MTK_DMA_SIZE);
-+
-+ /* Update VD with remaining data */
-+ hvd->src += tlen;
-+ hvd->dest += tlen;
-+ hvd->len -= tlen;
-+ }
-+
-+ /*
-+ * Tagging flag for the last PD for VD will be responsible for
-+ * completing VD.
-+ */
-+ if (!hvd->len) {
-+ prev = MTK_HSDMA_LAST_DESP_IDX(ring->cur_tptr, MTK_DMA_SIZE);
-+ ring->cb[prev].flag = MTK_HSDMA_VDESC_FINISHED;
-+ }
-+
-+ /* Ensure all changes indeed done before we're going on */
-+ wmb();
-+
-+ /*
-+ * Updating into hardware the pointer of TX ring lets HSDMA to take
-+ * action for those pending PDs.
-+ */
-+ mtk_dma_write(hsdma, MTK_HSDMA_TX_CPU, ring->cur_tptr);
-+
-+ spin_unlock_irqrestore(&hsdma->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void mtk_hsdma_issue_vchan_pending(struct mtk_hsdma_device *hsdma,
-+ struct mtk_hsdma_vchan *hvc)
-+{
-+ struct virt_dma_desc *vd, *vd2;
-+ int err;
-+
-+ lockdep_assert_held(&hvc->vc.lock);
-+
-+ list_for_each_entry_safe(vd, vd2, &hvc->vc.desc_issued, node) {
-+ struct mtk_hsdma_vdesc *hvd;
-+
-+ hvd = to_hsdma_vdesc(vd);
-+
-+ /* Map VD into PC and all VCs shares a single PC */
-+ err = mtk_hsdma_issue_pending_vdesc(hsdma, hsdma->pc, hvd);
-+
-+ /*
-+ * Move VD from desc_issued to desc_hw_processing when entire
-+ * VD is fit into available PDs. Otherwise, the uncompleted
-+ * VDs would stay in list desc_issued and then restart the
-+ * processing as soon as possible once underlying ring space
-+ * got freed.
-+ */
-+ if (err == -ENOSPC || hvd->len > 0)
-+ break;
-+
-+ /*
-+ * The extra list desc_hw_processing is used because
-+ * hardware can't provide sufficient information allowing us
-+ * to know what VDs are still working on the underlying ring.
-+ * Through the additional list, it can help us to implement
-+ * terminate_all, residue calculation and such thing needed
-+ * to know detail descriptor status on the hardware.
-+ */
-+ list_move_tail(&vd->node, &hvc->desc_hw_processing);
-+ }
-+}
-+
-+static void mtk_hsdma_free_rooms_in_ring(struct mtk_hsdma_device *hsdma)
-+{
-+ struct mtk_hsdma_vchan *hvc;
-+ struct mtk_hsdma_pdesc *rxd;
-+ struct mtk_hsdma_vdesc *hvd;
-+ struct mtk_hsdma_pchan *pc;
-+ struct mtk_hsdma_cb *cb;
-+ int i = MTK_DMA_SIZE;
-+ __le32 desc2;
-+ u32 status;
-+ u16 next;
-+
-+ /* Read IRQ status */
-+ status = mtk_dma_read(hsdma, MTK_HSDMA_INT_STATUS);
-+ if (unlikely(!(status & MTK_HSDMA_INT_RXDONE)))
-+ goto rx_done;
-+
-+ pc = hsdma->pc;
-+
-+ /*
-+ * Using a fail-safe loop with iterations of up to MTK_DMA_SIZE to
-+ * reclaim these finished descriptors: The most number of PDs the ISR
-+ * can handle at one time shouldn't be more than MTK_DMA_SIZE so we
-+ * take it as limited count instead of just using a dangerous infinite
-+ * poll.
-+ */
-+ while (i--) {
-+ next = MTK_HSDMA_NEXT_DESP_IDX(pc->ring.cur_rptr,
-+ MTK_DMA_SIZE);
-+ rxd = &pc->ring.rxd[next];
-+
-+ /*
-+ * If MTK_HSDMA_DESC_DDONE is no specified, that means data
-+ * moving for the PD is still under going.
-+ */
-+ desc2 = READ_ONCE(rxd->desc2);
-+ if (!(desc2 & hsdma->soc->ddone))
-+ break;
-+
-+ cb = &pc->ring.cb[next];
-+ if (unlikely(!cb->vd)) {
-+ dev_err(hsdma2dev(hsdma), "cb->vd cannot be null\n");
-+ break;
-+ }
-+
-+ /* Update residue of VD the associated PD belonged to */
-+ hvd = to_hsdma_vdesc(cb->vd);
-+ hvd->residue -= MTK_HSDMA_DESC_PLEN_GET(rxd->desc2);
-+
-+ /* Complete VD until the relevant last PD is finished */
-+ if (IS_MTK_HSDMA_VDESC_FINISHED(cb->flag)) {
-+ hvc = to_hsdma_vchan(cb->vd->tx.chan);
-+
-+ spin_lock(&hvc->vc.lock);
-+
-+ /* Remove VD from list desc_hw_processing */
-+ list_del(&cb->vd->node);
-+
-+ /* Add VD into list desc_completed */
-+ vchan_cookie_complete(cb->vd);
-+
-+ if (hvc->issue_synchronize &&
-+ list_empty(&hvc->desc_hw_processing)) {
-+ complete(&hvc->issue_completion);
-+ hvc->issue_synchronize = false;
-+ }
-+ spin_unlock(&hvc->vc.lock);
-+
-+ cb->flag = 0;
-+ }
-+
-+ cb->vd = 0;
-+
-+ /*
-+ * Recycle the RXD with the helper WRITE_ONCE that can ensure
-+ * data written into RAM would really happens.
-+ */
-+ WRITE_ONCE(rxd->desc1, 0);
-+ WRITE_ONCE(rxd->desc2, 0);
-+ pc->ring.cur_rptr = next;
-+
-+ /* Release rooms */
-+ atomic_inc(&pc->nr_free);
-+ }
-+
-+ /* Ensure all changes indeed done before we're going on */
-+ wmb();
-+
-+ /* Update CPU pointer for those completed PDs */
-+ mtk_dma_write(hsdma, MTK_HSDMA_RX_CPU, pc->ring.cur_rptr);
-+
-+ /*
-+ * Acking the pending IRQ allows hardware no longer to keep the used
-+ * IRQ line in certain trigger state when software has completed all
-+ * the finished physical descriptors.
-+ */
-+ if (atomic_read(&pc->nr_free) >= MTK_DMA_SIZE - 1)
-+ mtk_dma_write(hsdma, MTK_HSDMA_INT_STATUS, status);
-+
-+ /* ASAP handles pending VDs in all VCs after freeing some rooms */
-+ for (i = 0; i < hsdma->dma_requests; i++) {
-+ hvc = &hsdma->vc[i];
-+ spin_lock(&hvc->vc.lock);
-+ mtk_hsdma_issue_vchan_pending(hsdma, hvc);
-+ spin_unlock(&hvc->vc.lock);
-+ }
-+
-+rx_done:
-+ /* All completed PDs are cleaned up, so enable interrupt again */
-+ mtk_dma_set(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
-+}
-+
-+static irqreturn_t mtk_hsdma_irq(int irq, void *devid)
-+{
-+ struct mtk_hsdma_device *hsdma = devid;
-+
-+ /*
-+ * Disable interrupt until all completed PDs are cleaned up in
-+ * mtk_hsdma_free_rooms call.
-+ */
-+ mtk_dma_clr(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
-+
-+ mtk_hsdma_free_rooms_in_ring(hsdma);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct virt_dma_desc *mtk_hsdma_find_active_desc(struct dma_chan *c,
-+ dma_cookie_t cookie)
-+{
-+ struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
-+ struct virt_dma_desc *vd;
-+
-+ list_for_each_entry(vd, &hvc->desc_hw_processing, node)
-+ if (vd->tx.cookie == cookie)
-+ return vd;
-+
-+ list_for_each_entry(vd, &hvc->vc.desc_issued, node)
-+ if (vd->tx.cookie == cookie)
-+ return vd;
-+
-+ return NULL;
-+}
-+
-+static enum dma_status mtk_hsdma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie,
-+ struct dma_tx_state *txstate)
-+{
-+ struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
-+ struct mtk_hsdma_vdesc *hvd;
-+ struct virt_dma_desc *vd;
-+ enum dma_status ret;
-+ unsigned long flags;
-+ size_t bytes = 0;
-+
-+ ret = dma_cookie_status(c, cookie, txstate);
-+ if (ret == DMA_COMPLETE || !txstate)
-+ return ret;
-+
-+ spin_lock_irqsave(&hvc->vc.lock, flags);
-+ vd = mtk_hsdma_find_active_desc(c, cookie);
-+ spin_unlock_irqrestore(&hvc->vc.lock, flags);
-+
-+ if (vd) {
-+ hvd = to_hsdma_vdesc(vd);
-+ bytes = hvd->residue;
-+ }
-+
-+ dma_set_residue(txstate, bytes);
-+
-+ return ret;
-+}
-+
-+static void mtk_hsdma_issue_pending(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_device *hsdma = to_hsdma_dev(c);
-+ struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&hvc->vc.lock, flags);
-+
-+ if (vchan_issue_pending(&hvc->vc))
-+ mtk_hsdma_issue_vchan_pending(hsdma, hvc);
-+
-+ spin_unlock_irqrestore(&hvc->vc.lock, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *
-+mtk_hsdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest,
-+ dma_addr_t src, size_t len, unsigned long flags)
-+{
-+ struct mtk_hsdma_vdesc *hvd;
-+
-+ hvd = kzalloc(sizeof(*hvd), GFP_NOWAIT);
-+ if (!hvd)
-+ return NULL;
-+
-+ hvd->len = len;
-+ hvd->residue = len;
-+ hvd->src = src;
-+ hvd->dest = dest;
-+
-+ return vchan_tx_prep(to_virt_chan(c), &hvd->vd, flags);
-+}
-+
-+static int mtk_hsdma_free_inactive_desc(struct dma_chan *c)
-+{
-+ struct virt_dma_chan *vc = to_virt_chan(c);
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&vc->lock, flags);
-+ list_splice_tail_init(&vc->desc_allocated, &head);
-+ list_splice_tail_init(&vc->desc_submitted, &head);
-+ list_splice_tail_init(&vc->desc_issued, &head);
-+ spin_unlock_irqrestore(&vc->lock, flags);
-+
-+ /* At the point, we don't expect users put descriptor into VC again */
-+ vchan_dma_desc_free_list(vc, &head);
-+
-+ return 0;
-+}
-+
-+static void mtk_hsdma_free_active_desc(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
-+ bool sync_needed = false;
-+
-+ /*
-+ * Once issue_synchronize is being set, which means once the hardware
-+ * consumes all descriptors for the channel in the ring, the
-+ * synchronization must be be notified immediately it is completed.
-+ */
-+ spin_lock(&hvc->vc.lock);
-+ if (!list_empty(&hvc->desc_hw_processing)) {
-+ hvc->issue_synchronize = true;
-+ sync_needed = true;
-+ }
-+ spin_unlock(&hvc->vc.lock);
-+
-+ if (sync_needed)
-+ wait_for_completion(&hvc->issue_completion);
-+ /*
-+ * At the point, we expect that all remaining descriptors in the ring
-+ * for the channel should be all processing done.
-+ */
-+ WARN_ONCE(!list_empty(&hvc->desc_hw_processing),
-+ "Desc pending still in list desc_hw_processing\n");
-+
-+ /* Free all descriptors in list desc_completed */
-+ vchan_synchronize(&hvc->vc);
-+
-+ WARN_ONCE(!list_empty(&hvc->vc.desc_completed),
-+ "Desc pending still in list desc_completed\n");
-+}
-+
-+static int mtk_hsdma_terminate_all(struct dma_chan *c)
-+{
-+ /*
-+ * Free pending descriptors not processed yet by hardware that have
-+ * previously been submitted to the channel.
-+ */
-+ mtk_hsdma_free_inactive_desc(c);
-+
-+ /*
-+ * However, the DMA engine doesn't provide any way to stop these
-+ * descriptors being processed currently by hardware. The only way is
-+ * to just waiting until these descriptors are all processed completely
-+ * through mtk_hsdma_free_active_desc call.
-+ */
-+ mtk_hsdma_free_active_desc(c);
-+
-+ return 0;
-+}
-+
-+static int mtk_hsdma_alloc_chan_resources(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_device *hsdma = to_hsdma_dev(c);
-+ int err;
-+
-+ /*
-+ * Since HSDMA has only one PC, the resource for PC is being allocated
-+ * when the first VC is being created and the other VCs would run on
-+ * the same PC.
-+ */
-+ if (!refcount_read(&hsdma->pc_refcnt)) {
-+ err = mtk_hsdma_alloc_pchan(hsdma, hsdma->pc);
-+ if (err)
-+ return err;
-+ /*
-+ * refcount_inc would complain increment on 0; use-after-free.
-+ * Thus, we need to explicitly set it as 1 initially.
-+ */
-+ refcount_set(&hsdma->pc_refcnt, 1);
-+ } else {
-+ refcount_inc(&hsdma->pc_refcnt);
-+ }
-+
-+ return 0;
-+}
-+
-+static void mtk_hsdma_free_chan_resources(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_device *hsdma = to_hsdma_dev(c);
-+
-+ /* Free all descriptors in all lists on the VC */
-+ mtk_hsdma_terminate_all(c);
-+
-+ /* The resource for PC is not freed until all the VCs are destroyed */
-+ if (!refcount_dec_and_test(&hsdma->pc_refcnt))
-+ return;
-+
-+ mtk_hsdma_free_pchan(hsdma, hsdma->pc);
-+}
-+
-+static int mtk_hsdma_hw_init(struct mtk_hsdma_device *hsdma)
-+{
-+ int err;
-+
-+ pm_runtime_enable(hsdma2dev(hsdma));
-+ pm_runtime_get_sync(hsdma2dev(hsdma));
-+
-+ err = clk_prepare_enable(hsdma->clk);
-+ if (err)
-+ return err;
-+
-+ mtk_dma_write(hsdma, MTK_HSDMA_INT_ENABLE, 0);
-+ mtk_dma_write(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DEFAULT);
-+
-+ return 0;
-+}
-+
-+static int mtk_hsdma_hw_deinit(struct mtk_hsdma_device *hsdma)
-+{
-+ mtk_dma_write(hsdma, MTK_HSDMA_GLO, 0);
-+
-+ clk_disable_unprepare(hsdma->clk);
-+
-+ pm_runtime_put_sync(hsdma2dev(hsdma));
-+ pm_runtime_disable(hsdma2dev(hsdma));
-+
-+ return 0;
-+}
-+
-+static const struct mtk_hsdma_soc mt7623_soc = {
-+ .ddone = BIT(31),
-+ .ls0 = BIT(30),
-+};
-+
-+static const struct mtk_hsdma_soc mt7622_soc = {
-+ .ddone = BIT(15),
-+ .ls0 = BIT(14),
-+};
-+
-+static const struct of_device_id mtk_hsdma_match[] = {
-+ { .compatible = "mediatek,mt7623-hsdma", .data = &mt7623_soc},
-+ { .compatible = "mediatek,mt7622-hsdma", .data = &mt7622_soc},
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mtk_hsdma_match);
-+
-+static int mtk_hsdma_probe(struct platform_device *pdev)
-+{
-+ struct mtk_hsdma_device *hsdma;
-+ struct mtk_hsdma_vchan *vc;
-+ struct dma_device *dd;
-+ struct resource *res;
-+ int i, err;
-+
-+ hsdma = devm_kzalloc(&pdev->dev, sizeof(*hsdma), GFP_KERNEL);
-+ if (!hsdma)
-+ return -ENOMEM;
-+
-+ dd = &hsdma->ddev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ hsdma->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hsdma->base))
-+ return PTR_ERR(hsdma->base);
-+
-+ hsdma->soc = of_device_get_match_data(&pdev->dev);
-+ if (!hsdma->soc) {
-+ dev_err(&pdev->dev, "No device match found\n");
-+ return -ENODEV;
-+ }
-+
-+ hsdma->clk = devm_clk_get(&pdev->dev, "hsdma");
-+ if (IS_ERR(hsdma->clk)) {
-+ dev_err(&pdev->dev, "No clock for %s\n",
-+ dev_name(&pdev->dev));
-+ return PTR_ERR(hsdma->clk);
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "No irq resource for %s\n",
-+ dev_name(&pdev->dev));
-+ return -EINVAL;
-+ }
-+ hsdma->irq = res->start;
-+
-+ refcount_set(&hsdma->pc_refcnt, 0);
-+ spin_lock_init(&hsdma->lock);
-+
-+ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
-+
-+ dd->copy_align = MTK_HSDMA_ALIGN_SIZE;
-+ dd->device_alloc_chan_resources = mtk_hsdma_alloc_chan_resources;
-+ dd->device_free_chan_resources = mtk_hsdma_free_chan_resources;
-+ dd->device_tx_status = mtk_hsdma_tx_status;
-+ dd->device_issue_pending = mtk_hsdma_issue_pending;
-+ dd->device_prep_dma_memcpy = mtk_hsdma_prep_dma_memcpy;
-+ dd->device_terminate_all = mtk_hsdma_terminate_all;
-+ dd->src_addr_widths = MTK_HSDMA_DMA_BUSWIDTHS;
-+ dd->dst_addr_widths = MTK_HSDMA_DMA_BUSWIDTHS;
-+ dd->directions = BIT(DMA_MEM_TO_MEM);
-+ dd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
-+ dd->dev = &pdev->dev;
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ hsdma->dma_requests = MTK_HSDMA_NR_VCHANS;
-+ if (pdev->dev.of_node && of_property_read_u32(pdev->dev.of_node,
-+ "dma-requests",
-+ &hsdma->dma_requests)) {
-+ dev_info(&pdev->dev,
-+ "Using %u as missing dma-requests property\n",
-+ MTK_HSDMA_NR_VCHANS);
-+ }
-+
-+ hsdma->pc = devm_kcalloc(&pdev->dev, MTK_HSDMA_NR_MAX_PCHANS,
-+ sizeof(*hsdma->pc), GFP_KERNEL);
-+ if (!hsdma->pc)
-+ return -ENOMEM;
-+
-+ hsdma->vc = devm_kcalloc(&pdev->dev, hsdma->dma_requests,
-+ sizeof(*hsdma->vc), GFP_KERNEL);
-+ if (!hsdma->vc)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hsdma->dma_requests; i++) {
-+ vc = &hsdma->vc[i];
-+ vc->vc.desc_free = mtk_hsdma_vdesc_free;
-+ vchan_init(&vc->vc, dd);
-+ init_completion(&vc->issue_completion);
-+ INIT_LIST_HEAD(&vc->desc_hw_processing);
-+ }
-+
-+ err = dma_async_device_register(dd);
-+ if (err)
-+ return err;
-+
-+ err = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id, hsdma);
-+ if (err) {
-+ dev_err(&pdev->dev,
-+ "MediaTek HSDMA OF registration failed %d\n", err);
-+ goto err_unregister;
-+ }
-+
-+ mtk_hsdma_hw_init(hsdma);
-+
-+ err = devm_request_irq(&pdev->dev, hsdma->irq,
-+ mtk_hsdma_irq, 0,
-+ dev_name(&pdev->dev), hsdma);
-+ if (err) {
-+ dev_err(&pdev->dev,
-+ "request_irq failed with err %d\n", err);
-+ goto err_unregister;
-+ }
-+
-+ platform_set_drvdata(pdev, hsdma);
-+
-+ dev_info(&pdev->dev, "MediaTek HSDMA driver registered\n");
-+
-+ return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+
-+ return err;
-+}
-+
-+static int mtk_hsdma_remove(struct platform_device *pdev)
-+{
-+ struct mtk_hsdma_device *hsdma = platform_get_drvdata(pdev);
-+ struct mtk_hsdma_vchan *vc;
-+ int i;
-+
-+ /* Kill VC task */
-+ for (i = 0; i < hsdma->dma_requests; i++) {
-+ vc = &hsdma->vc[i];
-+
-+ list_del(&vc->vc.chan.device_node);
-+ tasklet_kill(&vc->vc.task);
-+ }
-+
-+ /* Disable DMA interrupt */
-+ mtk_dma_write(hsdma, MTK_HSDMA_INT_ENABLE, 0);
-+
-+ /* Waits for any pending IRQ handlers to complete */
-+ synchronize_irq(hsdma->irq);
-+
-+ /* Disable hardware */
-+ mtk_hsdma_hw_deinit(hsdma);
-+
-+ dma_async_device_unregister(&hsdma->ddev);
-+ of_dma_controller_free(pdev->dev.of_node);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_hsdma_driver = {
-+ .probe = mtk_hsdma_probe,
-+ .remove = mtk_hsdma_remove,
-+ .driver = {
-+ .name = KBUILD_MODNAME,
-+ .of_match_table = mtk_hsdma_match,
-+ },
-+};
-+module_platform_driver(mtk_hsdma_driver);
-+
-+MODULE_DESCRIPTION("MediaTek High-Speed DMA Controller Driver");
-+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mediatek/patches-4.14/0206-dt-bindings-clock-mediatek-update-audsys-documentati.patch b/target/linux/mediatek/patches-4.14/0206-dt-bindings-clock-mediatek-update-audsys-documentati.patch
deleted file mode 100644
index 649a74d1ad..0000000000
--- a/target/linux/mediatek/patches-4.14/0206-dt-bindings-clock-mediatek-update-audsys-documentati.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From e6d9c3121f2a8b92bd6202d6a32e7d428990d7d7 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 6 Mar 2018 17:09:29 +0800
-Subject: [PATCH 206/224] dt-bindings: clock: mediatek: update audsys
- documentation to adapt MFD device
-
-The MediaTek audio hardware block that exposes functionalities that are
-handled by separate subsystems in the kernel. These functions are all
-mapped somewhere at 0x112xxxxx, and there are some control bits are mixed
-up with other functions within the same registers.
-
-This patch modifies example to illustrate child nodes.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
----
- .../bindings/arm/mediatek/mediatek,audsys.txt | 19 ++++++++++++++-----
- 1 file changed, 14 insertions(+), 5 deletions(-)
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
-@@ -13,10 +13,19 @@ The AUDSYS controller uses the common cl
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-+Required sub-nodes:
-+-------
-+For common binding part and usage, refer to
-+../sonud/mt2701-afe-pcm.txt.
-+
- Example:
-
--audsys: audsys@11220000 {
-- compatible = "mediatek,mt7622-audsys", "syscon";
-- reg = <0 0x11220000 0 0x1000>;
-- #clock-cells = <1>;
--};
-+ audsys: clock-controller@11220000 {
-+ compatible = "mediatek,mt7622-audsys", "syscon";
-+ reg = <0 0x11220000 0 0x2000>;
-+ #clock-cells = <1>;
-+
-+ afe: audio-controller {
-+ ...
-+ };
-+ };
diff --git a/target/linux/mediatek/patches-4.14/0207-dt-bindings-clock-mediatek-add-audsys-support-for-MT.patch b/target/linux/mediatek/patches-4.14/0207-dt-bindings-clock-mediatek-add-audsys-support-for-MT.patch
deleted file mode 100644
index fde11b9231..0000000000
--- a/target/linux/mediatek/patches-4.14/0207-dt-bindings-clock-mediatek-add-audsys-support-for-MT.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 301de0fca7698f1ed5ed34fa7c082c3ae62d1e61 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 6 Mar 2018 17:09:30 +0800
-Subject: [PATCH 207/224] dt-bindings: clock: mediatek: add audsys support for
- MT2701
-
-This patch adds a compatible string for MT2701.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
----
- Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
-@@ -6,6 +6,7 @@ The MediaTek AUDSYS controller provides
- Required Properties:
-
- - compatible: Should be one of:
-+ - "mediatek,mt2701-audsys", "syscon"
- - "mediatek,mt7622-audsys", "syscon"
- - #clock-cells: Must be 1
-
diff --git a/target/linux/mediatek/patches-4.14/0208-clk-mediatek-update-missing-clock-data-for-MT7622-au.patch b/target/linux/mediatek/patches-4.14/0208-clk-mediatek-update-missing-clock-data-for-MT7622-au.patch
deleted file mode 100644
index d396bd93bf..0000000000
--- a/target/linux/mediatek/patches-4.14/0208-clk-mediatek-update-missing-clock-data-for-MT7622-au.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0725349768e96542ef06efbd87925a8603cba16a Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 6 Mar 2018 17:09:26 +0800
-Subject: [PATCH 208/224] clk: mediatek: update missing clock data for MT7622
- audsys
-
-Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- drivers/clk/mediatek/clk-mt7622-aud.c | 1 +
- include/dt-bindings/clock/mt7622-clk.h | 3 ++-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -106,6 +106,7 @@ static const struct mtk_gate audio_clks[
- GATE_AUDIO1(CLK_AUDIO_INTDIR, "audio_intdir", "intdir_sel", 20),
- GATE_AUDIO1(CLK_AUDIO_A1SYS, "audio_a1sys", "a1sys_hp_sel", 21),
- GATE_AUDIO1(CLK_AUDIO_A2SYS, "audio_a2sys", "a2sys_hp_sel", 22),
-+ GATE_AUDIO1(CLK_AUDIO_AFE_CONN, "audio_afe_conn", "a1sys_hp_sel", 23),
- /* AUDIO2 */
- GATE_AUDIO2(CLK_AUDIO_UL1, "audio_ul1", "a1sys_hp_sel", 0),
- GATE_AUDIO2(CLK_AUDIO_UL2, "audio_ul2", "a1sys_hp_sel", 1),
---- a/include/dt-bindings/clock/mt7622-clk.h
-+++ b/include/dt-bindings/clock/mt7622-clk.h
-@@ -235,7 +235,8 @@
- #define CLK_AUDIO_MEM_ASRC3 43
- #define CLK_AUDIO_MEM_ASRC4 44
- #define CLK_AUDIO_MEM_ASRC5 45
--#define CLK_AUDIO_NR_CLK 46
-+#define CLK_AUDIO_AFE_CONN 46
-+#define CLK_AUDIO_NR_CLK 47
-
- /* SSUSBSYS */
-
diff --git a/target/linux/mediatek/patches-4.14/0209-clk-mediatek-add-devm_of_platform_populate-for-MT762.patch b/target/linux/mediatek/patches-4.14/0209-clk-mediatek-add-devm_of_platform_populate-for-MT762.patch
deleted file mode 100644
index affd9a62b0..0000000000
--- a/target/linux/mediatek/patches-4.14/0209-clk-mediatek-add-devm_of_platform_populate-for-MT762.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 9dbdf33f1f246ecb6d957504781a970590b2d9f0 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 6 Mar 2018 17:09:27 +0800
-Subject: [PATCH 209/224] clk: mediatek: add devm_of_platform_populate() for
- MT7622 audsys
-
-Add devm_of_platform_populate() to populate devices which are children
-of the root node.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
----
- drivers/clk/mediatek/clk-mt7622-aud.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -142,6 +142,7 @@ static int clk_mt7622_audiosys_init(stru
- {
- struct clk_onecell_data *clk_data;
- struct device_node *node = pdev->dev.of_node;
-+
- int r;
-
- clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
-@@ -150,12 +151,15 @@ static int clk_mt7622_audiosys_init(stru
- clk_data);
-
- r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-- if (r)
-+ if (r) {
- dev_err(&pdev->dev,
- "could not register clock provider: %s: %d\n",
- pdev->name, r);
-
-- return r;
-+ return r;
-+ }
-+
-+ return devm_of_platform_populate(&pdev->dev);
- }
-
- static const struct of_device_id of_match_clk_mt7622_aud[] = {
diff --git a/target/linux/mediatek/patches-4.14/0210-arm64-dts-mt7622-add-clock-controller-device-nodes.patch b/target/linux/mediatek/patches-4.14/0210-arm64-dts-mt7622-add-clock-controller-device-nodes.patch
deleted file mode 100644
index 12f71a3e55..0000000000
--- a/target/linux/mediatek/patches-4.14/0210-arm64-dts-mt7622-add-clock-controller-device-nodes.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 9c76dd09d27dff05207241aa67a2c6054d057b32 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 10:30:32 +0800
-Subject: [PATCH 210/224] arm64: dts: mt7622: add clock controller device nodes
-
-Add clock controller nodes for MT7622 and include header for topckgen,
-infracfg, pericfg, apmixedsys, ethsys, sgmiisys, pciesys and ssusbsys
-for those devices nodes to be added afterwards.
-
-In addition, provides an oscillator node for the source of PLLs and dummy
-clock for PWARP to complement missing support of clock gate for the
-wrapper circuit in the driver.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Stephen Boyd <sboyd@codeaurora.org>
----
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 76 ++++++++++++++++++++++++++++++++
- 1 file changed, 76 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -8,6 +8,8 @@
-
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/clock/mt7622-clk.h>
-+#include <dt-bindings/reset/mt7622-reset.h>
-
- / {
- compatible = "mediatek,mt7622";
-@@ -48,6 +50,19 @@
- clock-frequency = <280000000>;
- };
-
-+ pwrap_clk: dummy40m {
-+ compatible = "fixed-clock";
-+ clock-frequency = <40000000>;
-+ #clock-cells = <0>;
-+ };
-+
-+ clk25m: oscillator {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <25000000>;
-+ clock-output-names = "clkxtal";
-+ };
-+
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
-@@ -78,6 +93,22 @@
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
-+ infracfg: infracfg@10000000 {
-+ compatible = "mediatek,mt7622-infracfg",
-+ "syscon";
-+ reg = <0 0x10000000 0 0x1000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ pericfg: pericfg@10002000 {
-+ compatible = "mediatek,mt7622-pericfg",
-+ "syscon";
-+ reg = <0 0x10002000 0 0x1000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
- sysirq: interrupt-controller@10200620 {
- compatible = "mediatek,mt7622-sysirq",
- "mediatek,mt6577-sysirq";
-@@ -87,6 +118,20 @@
- reg = <0 0x10200620 0 0x20>;
- };
-
-+ apmixedsys: apmixedsys@10209000 {
-+ compatible = "mediatek,mt7622-apmixedsys",
-+ "syscon";
-+ reg = <0 0x10209000 0 0x1000>;
-+ #clock-cells = <1>;
-+ };
-+
-+ topckgen: topckgen@10210000 {
-+ compatible = "mediatek,mt7622-topckgen",
-+ "syscon";
-+ reg = <0 0x10210000 0 0x1000>;
-+ #clock-cells = <1>;
-+ };
-+
- gic: interrupt-controller@10300000 {
- compatible = "arm,gic-400";
- interrupt-controller;
-@@ -107,4 +152,35 @@
- clock-names = "baud", "bus";
- status = "disabled";
- };
-+
-+ ssusbsys: ssusbsys@1a000000 {
-+ compatible = "mediatek,mt7622-ssusbsys",
-+ "syscon";
-+ reg = <0 0x1a000000 0 0x1000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ pciesys: pciesys@1a100800 {
-+ compatible = "mediatek,mt7622-pciesys",
-+ "syscon";
-+ reg = <0 0x1a100800 0 0x1000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ ethsys: syscon@1b000000 {
-+ compatible = "mediatek,mt7622-ethsys",
-+ "syscon";
-+ reg = <0 0x1b000000 0 0x1000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ sgmiisys: sgmiisys@1b128000 {
-+ compatible = "mediatek,mt7622-sgmiisys",
-+ "syscon";
-+ reg = <0 0x1b128000 0 0x1000>;
-+ #clock-cells = <1>;
-+ };
- };
diff --git a/target/linux/mediatek/patches-4.14/0211-arm64-dts-mt7622-add-power-domain-controller-device-.patch b/target/linux/mediatek/patches-4.14/0211-arm64-dts-mt7622-add-power-domain-controller-device-.patch
deleted file mode 100644
index c996c608df..0000000000
--- a/target/linux/mediatek/patches-4.14/0211-arm64-dts-mt7622-add-power-domain-controller-device-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 79d0293e8f35e87b1f068fc0b7963a86ba56800e Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 15:46:42 +0800
-Subject: [PATCH 211/224] arm64: dts: mt7622: add power domain controller
- device nodes
-
-add power domain controller nodes
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -9,6 +9,7 @@
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt7622-clk.h>
-+#include <dt-bindings/power/mt7622-power.h>
- #include <dt-bindings/reset/mt7622-reset.h>
-
- / {
-@@ -109,6 +110,20 @@
- #reset-cells = <1>;
- };
-
-+ scpsys: scpsys@10006000 {
-+ compatible = "mediatek,mt7622-scpsys",
-+ "syscon";
-+ #power-domain-cells = <1>;
-+ reg = <0 0x10006000 0 0x1000>;
-+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
-+ infracfg = <&infracfg>;
-+ clocks = <&topckgen CLK_TOP_HIF_SEL>;
-+ clock-names = "hif_sel";
-+ };
-+
- sysirq: interrupt-controller@10200620 {
- compatible = "mediatek,mt7622-sysirq",
- "mediatek,mt6577-sysirq";
diff --git a/target/linux/mediatek/patches-4.14/0212-arm64-dts-mt7622-add-pinctrl-related-device-nodes.patch b/target/linux/mediatek/patches-4.14/0212-arm64-dts-mt7622-add-pinctrl-related-device-nodes.patch
deleted file mode 100644
index 21dbb3aceb..0000000000
--- a/target/linux/mediatek/patches-4.14/0212-arm64-dts-mt7622-add-pinctrl-related-device-nodes.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-From 927c736a1a169713cd59140db5e82f8ed11dad60 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 29 Dec 2017 11:06:52 +0800
-Subject: [PATCH 212/224] arm64: dts: mt7622: add pinctrl related device nodes
-
-add pinctrl device nodes and rfb1 board, additionally include all pin
-groups possible being used on rfb1 board and available gpio keys.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
- 2 files changed, 207 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -7,6 +7,8 @@
- */
-
- /dts-v1/;
-+#include <dt-bindings/input/input.h>
-+
- #include "mt7622.dtsi"
-
- / {
-@@ -17,11 +19,209 @@
- bootargs = "console=ttyS0,115200n1";
- };
-
-+ gpio-keys {
-+ compatible = "gpio-keys-polled";
-+ poll-interval = <100>;
-+
-+ factory {
-+ label = "factory";
-+ linux,code = <BTN_0>;
-+ gpios = <&pio 0 0>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&pio 102 0>;
-+ };
-+ };
-+
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
- };
-
-+&pio {
-+ /* eMMC is shared pin with parallel NAND */
-+ emmc_pins_default: emmc-pins-default {
-+ mux {
-+ function = "emmc", "emmc_rst";
-+ groups = "emmc";
-+ };
-+ };
-+
-+ emmc_pins_uhs: emmc-pins-uhs {
-+ mux {
-+ function = "emmc";
-+ groups = "emmc";
-+ };
-+ };
-+
-+ eth_pins: eth-pins {
-+ mux {
-+ function = "eth";
-+ groups = "mdc_mdio", "rgmii_via_gmac2";
-+ };
-+ };
-+
-+ i2c1_pins: i2c1-pins {
-+ mux {
-+ function = "i2c";
-+ groups = "i2c1_0";
-+ };
-+ };
-+
-+ i2c2_pins: i2c2-pins {
-+ mux {
-+ function = "i2c";
-+ groups = "i2c2_0";
-+ };
-+ };
-+
-+ i2s1_pins: i2s1-pins {
-+ mux {
-+ function = "i2s";
-+ groups = "i2s_out_bclk_ws_mclk",
-+ "i2s1_in_data",
-+ "i2s1_out_data";
-+ };
-+ };
-+
-+ irrx_pins: irrx-pins {
-+ mux {
-+ function = "ir";
-+ groups = "ir_1_rx";
-+ };
-+ };
-+
-+ irtx_pins: irtx-pins {
-+ mux {
-+ function = "ir";
-+ groups = "ir_1_tx";
-+ };
-+ };
-+
-+ /* Parallel nand is shared pin with eMMC */
-+ parallel_nand_pins: parallel-nand-pins {
-+ mux {
-+ function = "flash";
-+ groups = "par_nand";
-+ };
-+ };
-+
-+ pcie0_pins: pcie0-pins {
-+ mux {
-+ function = "pcie";
-+ groups = "pcie0_pad_perst",
-+ "pcie0_1_waken",
-+ "pcie0_1_clkreq";
-+ };
-+ };
-+
-+ pcie1_pins: pcie1-pins {
-+ mux {
-+ function = "pcie";
-+ groups = "pcie1_pad_perst",
-+ "pcie1_0_waken",
-+ "pcie1_0_clkreq";
-+ };
-+ };
-+
-+ pmic_bus_pins: pmic-bus-pins {
-+ mux {
-+ function = "pmic";
-+ groups = "pmic_bus";
-+ };
-+ };
-+
-+ pwm7_pins: pwm1-2-pins {
-+ mux {
-+ function = "pwm";
-+ groups = "pwm_ch7_2";
-+ };
-+ };
-+
-+ wled_pins: wled-pins {
-+ mux {
-+ function = "led";
-+ groups = "wled";
-+ };
-+ };
-+
-+ sd0_pins_default: sd0-pins-default {
-+ mux {
-+ function = "sd";
-+ groups = "sd_0";
-+ };
-+ };
-+
-+ sd0_pins_uhs: sd0-pins-uhs {
-+ mux {
-+ function = "sd";
-+ groups = "sd_0";
-+ };
-+ };
-+
-+ /* Serial NAND is shared pin with SPI-NOR */
-+ serial_nand_pins: serial-nand-pins {
-+ mux {
-+ function = "flash";
-+ groups = "snfi";
-+ };
-+ };
-+
-+ spic0_pins: spic0-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spic0_0";
-+ };
-+ };
-+
-+ spic1_pins: spic1-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spic1_0";
-+ };
-+ };
-+
-+ /* SPI-NOR is shared pin with serial NAND */
-+ spi_nor_pins: spi-nor-pins {
-+ mux {
-+ function = "flash";
-+ groups = "spi_nor";
-+ };
-+ };
-+
-+ /* serial NAND is shared pin with SPI-NOR */
-+ serial_nand_pins: serial-nand-pins {
-+ mux {
-+ function = "flash";
-+ groups = "snfi";
-+ };
-+ };
-+
-+ uart0_pins: uart0-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart0_0_tx_rx" ;
-+ };
-+ };
-+
-+ uart2_pins: uart2-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart2_1_tx_rx" ;
-+ };
-+ };
-+
-+ watchdog_pins: watchdog-pins {
-+ mux {
-+ function = "watchdog";
-+ groups = "watchdog";
-+ };
-+ };
-+};
-+
- &uart0 {
- status = "okay";
- };
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -147,6 +147,13 @@
- #clock-cells = <1>;
- };
-
-+ pio: pinctrl@10211000 {
-+ compatible = "mediatek,mt7622-pinctrl";
-+ reg = <0 0x10211000 0 0x1000>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
- gic: interrupt-controller@10300000 {
- compatible = "arm,gic-400";
- interrupt-controller;
diff --git a/target/linux/mediatek/patches-4.14/0213-arm64-dts-mt7622-add-PMIC-MT6380-related-nodes.patch b/target/linux/mediatek/patches-4.14/0213-arm64-dts-mt7622-add-PMIC-MT6380-related-nodes.patch
deleted file mode 100644
index 02c0ad89f1..0000000000
--- a/target/linux/mediatek/patches-4.14/0213-arm64-dts-mt7622-add-PMIC-MT6380-related-nodes.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From 78e92290c8c9511d0d540dfd0450e64169f08c20 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 5 Feb 2018 22:44:44 +0800
-Subject: [PATCH 213/224] arm64: dts: mt7622: add PMIC MT6380 related nodes
-
-Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
-regulator nodes in an alone file to allow similar boards using MT6380
-able to resue the configuration.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Mark Brown <broonie@kernel.org>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
-Cc: Philippe Ombredanne <pombredanne@nexb.com>
-Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
----
- arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 ++++++++++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 +++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 12 ++++
- 3 files changed, 106 insertions(+)
- create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
-@@ -0,0 +1,86 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * dts file for MediaTek MT6380 regulator
-+ *
-+ * Copyright (c) 2018 MediaTek Inc.
-+ * Author: Chenglin Xu <chenglin.xu@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ */
-+
-+&pwrap {
-+ regulators {
-+ compatible = "mediatek,mt6380-regulator";
-+
-+ mt6380_vcpu_reg: buck-vcore1 {
-+ regulator-name = "vcore1";
-+ regulator-min-microvolt = < 600000>;
-+ regulator-max-microvolt = <1393750>;
-+ regulator-ramp-delay = <6250>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vcore_reg: buck-vcore {
-+ regulator-name = "vcore";
-+ regulator-min-microvolt = <600000>;
-+ regulator-max-microvolt = <1393750>;
-+ regulator-ramp-delay = <6250>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vrf_reg: buck-vrf {
-+ regulator-name = "vrf";
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1575000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vm_reg: ldo-vm {
-+ regulator-name = "vm";
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_va_reg: ldo-va {
-+ regulator-name = "va";
-+ regulator-min-microvolt = <2200000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vphy_reg: ldo-vphy {
-+ regulator-name = "vphy";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vddr_reg: ldo-vddr {
-+ regulator-name = "vddr";
-+ regulator-min-microvolt = <1240000>;
-+ regulator-max-microvolt = <1840000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ mt6380_vt_reg: ldo-vt {
-+ regulator-name = "vt";
-+ regulator-min-microvolt = <2200000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-ramp-delay = <0>;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+ };
-+};
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -10,6 +10,7 @@
- #include <dt-bindings/input/input.h>
-
- #include "mt7622.dtsi"
-+#include "mt6380.dtsi"
-
- / {
- model = "MediaTek MT7622 RFB1 board";
-@@ -222,6 +223,13 @@
- };
- };
-
-+&pwrap {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_bus_pins>;
-+
-+ status = "okay";
-+};
-+
- &uart0 {
- status = "okay";
- };
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -102,6 +102,18 @@
- #reset-cells = <1>;
- };
-
-+ pwrap: pwrap@10001000 {
-+ compatible = "mediatek,mt7622-pwrap";
-+ reg = <0 0x10001000 0 0x250>;
-+ reg-names = "pwrap";
-+ clocks = <&infracfg CLK_INFRA_PMIC_PD>,<&pwrap_clk>;
-+ clock-names = "spi","wrap";
-+ resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
-+ reset-names = "pwrap";
-+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
- pericfg: pericfg@10002000 {
- compatible = "mediatek,mt7622-pericfg",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0214-arm64-dts-mt7622-add-cpufreq-related-device-nodes.patch b/target/linux/mediatek/patches-4.14/0214-arm64-dts-mt7622-add-cpufreq-related-device-nodes.patch
deleted file mode 100644
index 413c7baa42..0000000000
--- a/target/linux/mediatek/patches-4.14/0214-arm64-dts-mt7622-add-cpufreq-related-device-nodes.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 19fc79333af0d3733d4987bc1e554ae7e8a8cb0d Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 16:26:10 +0800
-Subject: [PATCH 214/224] arm64: dts: mt7622: add cpufreq related device nodes
-
-Add clocks, regulators and opp information into cpu nodes.
-In addition, the power supply for cpu nodes is deployed on
-mt7622-rfb1 board.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Viresh Kumar <viresh.kumar@linaro.org>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 52 ++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -20,6 +20,18 @@
- bootargs = "console=ttyS0,115200n1";
- };
-
-+ cpus {
-+ cpu@0 {
-+ proc-supply = <&mt6380_vcpu_reg>;
-+ sram-supply = <&mt6380_vm_reg>;
-+ };
-+
-+ cpu@1 {
-+ proc-supply = <&mt6380_vcpu_reg>;
-+ sram-supply = <&mt6380_vm_reg>;
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -18,6 +18,50 @@
- #address-cells = <2>;
- #size-cells = <2>;
-
-+ cpu_opp_table: opp-table {
-+ compatible = "operating-points-v2";
-+ opp-shared;
-+ opp-300000000 {
-+ opp-hz = /bits/ 64 <30000000>;
-+ opp-microvolt = <950000>;
-+ };
-+
-+ opp-437500000 {
-+ opp-hz = /bits/ 64 <437500000>;
-+ opp-microvolt = <1000000>;
-+ };
-+
-+ opp-600000000 {
-+ opp-hz = /bits/ 64 <600000000>;
-+ opp-microvolt = <1050000>;
-+ };
-+
-+ opp-812500000 {
-+ opp-hz = /bits/ 64 <812500000>;
-+ opp-microvolt = <1100000>;
-+ };
-+
-+ opp-1025000000 {
-+ opp-hz = /bits/ 64 <1025000000>;
-+ opp-microvolt = <1150000>;
-+ };
-+
-+ opp-1137500000 {
-+ opp-hz = /bits/ 64 <1137500000>;
-+ opp-microvolt = <1200000>;
-+ };
-+
-+ opp-1262500000 {
-+ opp-hz = /bits/ 64 <1262500000>;
-+ opp-microvolt = <1250000>;
-+ };
-+
-+ opp-1350000000 {
-+ opp-hz = /bits/ 64 <1350000000>;
-+ opp-microvolt = <1310000>;
-+ };
-+ };
-+
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-@@ -26,6 +70,10 @@
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x0>;
-+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
-+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points-v2 = <&cpu_opp_table>;
- enable-method = "psci";
- clock-frequency = <1300000000>;
- };
-@@ -34,6 +82,10 @@
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x1>;
-+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
-+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
-+ clock-names = "cpu", "intermediate";
-+ operating-points-v2 = <&cpu_opp_table>;
- enable-method = "psci";
- clock-frequency = <1300000000>;
- };
diff --git a/target/linux/mediatek/patches-4.14/0215-arm64-dts-mt7622-turn-uart0-clock-to-real-ones.patch b/target/linux/mediatek/patches-4.14/0215-arm64-dts-mt7622-turn-uart0-clock-to-real-ones.patch
deleted file mode 100644
index 39e0a2f00c..0000000000
--- a/target/linux/mediatek/patches-4.14/0215-arm64-dts-mt7622-turn-uart0-clock-to-real-ones.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 84b3092b3773777de1ba1ad142e53247fb881ddd Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 18:00:11 +0800
-Subject: [PATCH 215/224] arm64: dts: mt7622: turn uart0 clock to real ones
-
-This patch also cleans up two oscillators that provide clocks for MT7623.
-Switch the uart clocks to the real ones while at it.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 ++-------------
- 1 file changed, 2 insertions(+), 13 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -91,18 +91,6 @@
- };
- };
-
-- uart_clk: dummy25m {
-- compatible = "fixed-clock";
-- #clock-cells = <0>;
-- clock-frequency = <25000000>;
-- };
--
-- bus_clk: dummy280m {
-- compatible = "fixed-clock";
-- #clock-cells = <0>;
-- clock-frequency = <280000000>;
-- };
--
- pwrap_clk: dummy40m {
- compatible = "fixed-clock";
- clock-frequency = <40000000>;
-@@ -234,7 +222,8 @@
- "mediatek,mt6577-uart";
- reg = <0 0x11002000 0 0x400>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-- clocks = <&uart_clk>, <&bus_clk>;
-+ clocks = <&topckgen CLK_TOP_UART_SEL>,
-+ <&pericfg CLK_PERI_UART1_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
diff --git a/target/linux/mediatek/patches-4.14/0216-arm64-dts-mt7622-add-SoC-and-peripheral-related-devi.patch b/target/linux/mediatek/patches-4.14/0216-arm64-dts-mt7622-add-SoC-and-peripheral-related-devi.patch
deleted file mode 100644
index 6bef230413..0000000000
--- a/target/linux/mediatek/patches-4.14/0216-arm64-dts-mt7622-add-SoC-and-peripheral-related-devi.patch
+++ /dev/null
@@ -1,420 +0,0 @@
-From a69ac853def2f93194e244974f611477a1521a4a Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Thu, 28 Dec 2017 18:18:26 +0800
-Subject: [PATCH 216/224] arm64: dts: mt7622: add SoC and peripheral related
- device nodes
-
-Add watchdog, rtc, auxadc, cir, efuse, rng, uart[1-4], pwm, i2c[0-2],
-spi[0-1], btif and thermal related nodes.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
-Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
-Cc: Zhi Mao <zhi.mao@mediatek.com>
-Cc: Jun Gao <jun.gao@mediatek.com>
-Cc: Leilk Liu <leilk.liu@mediatek.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 54 ++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 264 +++++++++++++++++++++++++++
- 2 files changed, 318 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -235,6 +235,34 @@
- };
- };
-
-+&btif {
-+ status = "okay";
-+};
-+
-+&cir {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&irrx_pins>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins>;
-+ status = "okay";
-+};
-+
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm7_pins>;
-+ status = "okay";
-+};
-+
- &pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-@@ -242,6 +270,32 @@
- status = "okay";
- };
-
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spic0_pins>;
-+ status = "okay";
-+};
-+
-+&spi1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spic1_pins>;
-+ status = "okay";
-+};
-+
- &uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "okay";
-+};
-+
-+&watchdog {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&watchdog_pins>;
- status = "okay";
- };
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -11,6 +11,7 @@
- #include <dt-bindings/clock/mt7622-clk.h>
- #include <dt-bindings/power/mt7622-power.h>
- #include <dt-bindings/reset/mt7622-reset.h>
-+#include <dt-bindings/thermal/thermal.h>
-
- / {
- compatible = "mediatek,mt7622";
-@@ -74,6 +75,7 @@
- <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
- clock-names = "cpu", "intermediate";
- operating-points-v2 = <&cpu_opp_table>;
-+ #cooling-cells = <2>;
- enable-method = "psci";
- clock-frequency = <1300000000>;
- };
-@@ -121,6 +123,58 @@
- };
- };
-
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&thermal 0>;
-+
-+ trips {
-+ cpu_passive: cpu-passive {
-+ temperature = <47000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+
-+ cpu_active: cpu-active {
-+ temperature = <67000>;
-+ hysteresis = <2000>;
-+ type = "active";
-+ };
-+
-+ cpu_hot: cpu-hot {
-+ temperature = <87000>;
-+ hysteresis = <2000>;
-+ type = "hot";
-+ };
-+
-+ cpu-crit {
-+ temperature = <107000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0 {
-+ trip = <&cpu_passive>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+
-+ map1 {
-+ trip = <&cpu_active>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+
-+ map2 {
-+ trip = <&cpu_hot>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+ };
-+ };
-+ };
-+
- timer {
- compatible = "arm,armv8-timer";
- interrupt-parent = <&gic>;
-@@ -176,6 +230,16 @@
- clock-names = "hif_sel";
- };
-
-+ cir: cir@10009000 {
-+ compatible = "mediatek,mt7622-cir";
-+ reg = <0 0x10009000 0 0x1000>;
-+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&infracfg CLK_INFRA_IRRX_PD>,
-+ <&topckgen CLK_TOP_AXI_SEL>;
-+ clock-names = "clk", "bus";
-+ status = "disabled";
-+ };
-+
- sysirq: interrupt-controller@10200620 {
- compatible = "mediatek,mt7622-sysirq",
- "mediatek,mt6577-sysirq";
-@@ -185,6 +249,18 @@
- reg = <0 0x10200620 0 0x20>;
- };
-
-+ efuse: efuse@10206000 {
-+ compatible = "mediatek,mt7622-efuse",
-+ "mediatek,efuse";
-+ reg = <0 0x10206000 0 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ thermal_calibration: calib@198 {
-+ reg = <0x198 0xc>;
-+ };
-+ };
-+
- apmixedsys: apmixedsys@10209000 {
- compatible = "mediatek,mt7622-apmixedsys",
- "syscon";
-@@ -199,6 +275,14 @@
- #clock-cells = <1>;
- };
-
-+ rng: rng@1020f000 {
-+ compatible = "mediatek,mt7622-rng",
-+ "mediatek,mt7623-rng";
-+ reg = <0 0x1020f000 0 0x1000>;
-+ clocks = <&infracfg CLK_INFRA_TRNG>;
-+ clock-names = "rng";
-+ };
-+
- pio: pinctrl@10211000 {
- compatible = "mediatek,mt7622-pinctrl";
- reg = <0 0x10211000 0 0x1000>;
-@@ -206,6 +290,21 @@
- #gpio-cells = <2>;
- };
-
-+ watchdog: watchdog@10212000 {
-+ compatible = "mediatek,mt7622-wdt",
-+ "mediatek,mt6589-wdt";
-+ reg = <0 0x10212000 0 0x800>;
-+ };
-+
-+ rtc: rtc@10212800 {
-+ compatible = "mediatek,mt7622-rtc",
-+ "mediatek,soc-rtc";
-+ reg = <0 0x10212800 0 0x200>;
-+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_RTC>;
-+ clock-names = "rtc";
-+ };
-+
- gic: interrupt-controller@10300000 {
- compatible = "arm,gic-400";
- interrupt-controller;
-@@ -217,6 +316,14 @@
- <0 0x10360000 0 0x2000>;
- };
-
-+ auxadc: adc@11001000 {
-+ compatible = "mediatek,mt7622-auxadc";
-+ reg = <0 0x11001000 0 0x1000>;
-+ clocks = <&pericfg CLK_PERI_AUXADC_PD>;
-+ clock-names = "main";
-+ #io-channel-cells = <1>;
-+ };
-+
- uart0: serial@11002000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
-@@ -227,6 +334,163 @@
- clock-names = "baud", "bus";
- status = "disabled";
- };
-+
-+ uart1: serial@11003000 {
-+ compatible = "mediatek,mt7622-uart",
-+ "mediatek,mt6577-uart";
-+ reg = <0 0x11003000 0 0x400>;
-+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_UART_SEL>,
-+ <&pericfg CLK_PERI_UART1_PD>;
-+ clock-names = "baud", "bus";
-+ status = "disabled";
-+ };
-+
-+ uart2: serial@11004000 {
-+ compatible = "mediatek,mt7622-uart",
-+ "mediatek,mt6577-uart";
-+ reg = <0 0x11004000 0 0x400>;
-+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_UART_SEL>,
-+ <&pericfg CLK_PERI_UART2_PD>;
-+ clock-names = "baud", "bus";
-+ status = "disabled";
-+ };
-+
-+ uart3: serial@11005000 {
-+ compatible = "mediatek,mt7622-uart",
-+ "mediatek,mt6577-uart";
-+ reg = <0 0x11005000 0 0x400>;
-+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_UART_SEL>,
-+ <&pericfg CLK_PERI_UART3_PD>;
-+ clock-names = "baud", "bus";
-+ status = "disabled";
-+ };
-+
-+ pwm: pwm@11006000 {
-+ compatible = "mediatek,mt7622-pwm";
-+ reg = <0 0x11006000 0 0x1000>;
-+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
-+ <&pericfg CLK_PERI_PWM_PD>,
-+ <&pericfg CLK_PERI_PWM1_PD>,
-+ <&pericfg CLK_PERI_PWM2_PD>,
-+ <&pericfg CLK_PERI_PWM3_PD>,
-+ <&pericfg CLK_PERI_PWM4_PD>,
-+ <&pericfg CLK_PERI_PWM5_PD>,
-+ <&pericfg CLK_PERI_PWM6_PD>;
-+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
-+ "pwm5", "pwm6";
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c@11007000 {
-+ compatible = "mediatek,mt7622-i2c";
-+ reg = <0 0x11007000 0 0x90>,
-+ <0 0x11000100 0 0x80>;
-+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
-+ clock-div = <16>;
-+ clocks = <&pericfg CLK_PERI_I2C0_PD>,
-+ <&pericfg CLK_PERI_AP_DMA_PD>;
-+ clock-names = "main", "dma";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c1: i2c@11008000 {
-+ compatible = "mediatek,mt7622-i2c";
-+ reg = <0 0x11008000 0 0x90>,
-+ <0 0x11000180 0 0x80>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
-+ clock-div = <16>;
-+ clocks = <&pericfg CLK_PERI_I2C1_PD>,
-+ <&pericfg CLK_PERI_AP_DMA_PD>;
-+ clock-names = "main", "dma";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c2: i2c@11009000 {
-+ compatible = "mediatek,mt7622-i2c";
-+ reg = <0 0x11009000 0 0x90>,
-+ <0 0x11000200 0 0x80>;
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-+ clock-div = <16>;
-+ clocks = <&pericfg CLK_PERI_I2C2_PD>,
-+ <&pericfg CLK_PERI_AP_DMA_PD>;
-+ clock-names = "main", "dma";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ spi0: spi@1100a000 {
-+ compatible = "mediatek,mt7622-spi";
-+ reg = <0 0x1100a000 0 0x100>;
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-+ <&topckgen CLK_TOP_SPI0_SEL>,
-+ <&pericfg CLK_PERI_SPI0_PD>;
-+ clock-names = "parent-clk", "sel-clk", "spi-clk";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ thermal: thermal@1100b000 {
-+ #thermal-sensor-cells = <1>;
-+ compatible = "mediatek,mt7622-thermal";
-+ reg = <0 0x1100b000 0 0x1000>;
-+ interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_THERM_PD>,
-+ <&pericfg CLK_PERI_AUXADC_PD>;
-+ clock-names = "therm", "auxadc";
-+ resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-+ reset-names = "therm";
-+ mediatek,auxadc = <&auxadc>;
-+ mediatek,apmixedsys = <&apmixedsys>;
-+ nvmem-cells = <&thermal_calibration>;
-+ nvmem-cell-names = "calibration-data";
-+ };
-+
-+ btif: serial@1100c000 {
-+ compatible = "mediatek,mt7622-btif",
-+ "mediatek,mtk-btif";
-+ reg = <0 0x1100c000 0 0x1000>;
-+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_BTIF_PD>;
-+ clock-names = "main";
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ status = "disabled";
-+ };
-+
-+ spi1: spi@11016000 {
-+ compatible = "mediatek,mt7622-spi";
-+ reg = <0 0x11016000 0 0x100>;
-+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-+ <&topckgen CLK_TOP_SPI1_SEL>,
-+ <&pericfg CLK_PERI_SPI1_PD>;
-+ clock-names = "parent-clk", "sel-clk", "spi-clk";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ uart4: serial@11019000 {
-+ compatible = "mediatek,mt7622-uart",
-+ "mediatek,mt6577-uart";
-+ reg = <0 0x11019000 0 0x400>;
-+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_UART_SEL>,
-+ <&pericfg CLK_PERI_UART4_PD>;
-+ clock-names = "baud", "bus";
-+ status = "disabled";
-+ };
-
- ssusbsys: ssusbsys@1a000000 {
- compatible = "mediatek,mt7622-ssusbsys",
diff --git a/target/linux/mediatek/patches-4.14/0217-arm64-dts-mt7622-add-flash-related-device-nodes.patch b/target/linux/mediatek/patches-4.14/0217-arm64-dts-mt7622-add-flash-related-device-nodes.patch
deleted file mode 100644
index 85812878ab..0000000000
--- a/target/linux/mediatek/patches-4.14/0217-arm64-dts-mt7622-add-flash-related-device-nodes.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 0a84c72d1c606129b8af670cbcc73be4168ab753 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 29 Dec 2017 10:36:37 +0800
-Subject: [PATCH 217/224] arm64: dts: mt7622: add flash related device nodes
-
-add nodes for NOR flash, parallel Nand flash with error correction code
-support.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Cc: RogerCC Lin <rogercc.lin@mediatek.com>
-Cc: Guochun Mao <guochun.mao@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 21 +++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 34 ++++++++++++++++++++++++++++
- 2 files changed, 55 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -235,6 +235,10 @@
- };
- };
-
-+&bch {
-+ status = "disabled";
-+};
-+
- &btif {
- status = "okay";
- };
-@@ -257,6 +261,23 @@
- status = "okay";
- };
-
-+&nandc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&parallel_nand_pins>;
-+ status = "disabled";
-+};
-+
-+&nor_flash {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi_nor_pins>;
-+ status = "disabled";
-+
-+ flash@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ };
-+};
-+
- &pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -468,6 +468,40 @@
- status = "disabled";
- };
-
-+ nandc: nfi@1100d000 {
-+ compatible = "mediatek,mt7622-nfc";
-+ reg = <0 0x1100D000 0 0x1000>;
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_NFI_PD>,
-+ <&pericfg CLK_PERI_SNFI_PD>;
-+ clock-names = "nfi_clk", "pad_clk";
-+ ecc-engine = <&bch>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ bch: ecc@1100e000 {
-+ compatible = "mediatek,mt7622-ecc";
-+ reg = <0 0x1100e000 0 0x1000>;
-+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
-+ clock-names = "nfiecc_clk";
-+ status = "disabled";
-+ };
-+
-+ nor_flash: spi@11014000 {
-+ compatible = "mediatek,mt7622-nor",
-+ "mediatek,mt8173-nor";
-+ reg = <0 0x11014000 0 0xe0>;
-+ clocks = <&pericfg CLK_PERI_FLASH_PD>,
-+ <&topckgen CLK_TOP_FLASH_SEL>;
-+ clock-names = "spi", "sf";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
- spi1: spi@11016000 {
- compatible = "mediatek,mt7622-spi";
- reg = <0 0x11016000 0 0x100>;
diff --git a/target/linux/mediatek/patches-4.14/0218-arm64-dts-mt7622-add-ethernet-device-nodes.patch b/target/linux/mediatek/patches-4.14/0218-arm64-dts-mt7622-add-ethernet-device-nodes.patch
deleted file mode 100644
index 2986cc740a..0000000000
--- a/target/linux/mediatek/patches-4.14/0218-arm64-dts-mt7622-add-ethernet-device-nodes.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 4fbacf244953285ac58cb833060076fafd990588 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 29 Dec 2017 10:45:07 +0800
-Subject: [PATCH 218/224] arm64: dts: mt7622: add ethernet device nodes
-
-add ethernet device nodes which enable GMAC1 with SGMII interface
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 22 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 31 ++++++++++++++++++++++++++++
- 2 files changed, 53 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -249,6 +249,28 @@
- status = "okay";
- };
-
-+&eth {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&eth_pins>;
-+ status = "okay";
-+
-+ gmac1: mac@1 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <1>;
-+ phy-handle = <&phy5>;
-+ };
-+
-+ mdio-bus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ phy5: ethernet-phy@5 {
-+ reg = <5>;
-+ phy-mode = "sgmii";
-+ };
-+ };
-+};
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -550,6 +550,37 @@
- #reset-cells = <1>;
- };
-
-+ eth: ethernet@1b100000 {
-+ compatible = "mediatek,mt7622-eth",
-+ "mediatek,mt2701-eth",
-+ "syscon";
-+ reg = <0 0x1b100000 0 0x20000>;
-+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
-+ <&ethsys CLK_ETH_ESW_EN>,
-+ <&ethsys CLK_ETH_GP0_EN>,
-+ <&ethsys CLK_ETH_GP1_EN>,
-+ <&ethsys CLK_ETH_GP2_EN>,
-+ <&sgmiisys CLK_SGMII_TX250M_EN>,
-+ <&sgmiisys CLK_SGMII_RX250M_EN>,
-+ <&sgmiisys CLK_SGMII_CDR_REF>,
-+ <&sgmiisys CLK_SGMII_CDR_FB>,
-+ <&topckgen CLK_TOP_SGMIIPLL>,
-+ <&apmixedsys CLK_APMIXED_ETH2PLL>;
-+ clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
-+ "sgmii_tx250m", "sgmii_rx250m",
-+ "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
-+ "eth2pll";
-+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
-+ mediatek,ethsys = <&ethsys>;
-+ mediatek,sgmiisys = <&sgmiisys>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
- sgmiisys: sgmiisys@1b128000 {
- compatible = "mediatek,mt7622-sgmiisys",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0219-arm64-dts-mt7622-add-PCIe-device-nodes.patch b/target/linux/mediatek/patches-4.14/0219-arm64-dts-mt7622-add-PCIe-device-nodes.patch
deleted file mode 100644
index 4908edab86..0000000000
--- a/target/linux/mediatek/patches-4.14/0219-arm64-dts-mt7622-add-PCIe-device-nodes.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From e84732bd6022dd12839dd34d508eb27428367c24 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Wed, 20 Dec 2017 15:57:30 +0800
-Subject: [PATCH 219/224] arm64: dts: mt7622: add PCIe device nodes
-
-This patch adds PCIe support fot MT7622.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 10 ++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 74 ++++++++++++++++++++++++++++
- 2 files changed, 84 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -54,6 +54,16 @@
- };
- };
-
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie0_pins>;
-+ status = "okay";
-+
-+ pcie@0,0 {
-+ status = "okay";
-+ };
-+};
-+
- &pio {
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -542,6 +542,80 @@
- #reset-cells = <1>;
- };
-
-+ pcie: pcie@1a140000 {
-+ compatible = "mediatek,mt7622-pcie";
-+ device_type = "pci";
-+ reg = <0 0x1a140000 0 0x1000>,
-+ <0 0x1a143000 0 0x1000>,
-+ <0 0x1a145000 0 0x1000>;
-+ reg-names = "subsys", "port0", "port1";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-+ <&pciesys CLK_PCIE_P1_MAC_EN>,
-+ <&pciesys CLK_PCIE_P0_AHB_EN>,
-+ <&pciesys CLK_PCIE_P0_AHB_EN>,
-+ <&pciesys CLK_PCIE_P0_AUX_EN>,
-+ <&pciesys CLK_PCIE_P1_AUX_EN>,
-+ <&pciesys CLK_PCIE_P0_AXI_EN>,
-+ <&pciesys CLK_PCIE_P1_AXI_EN>,
-+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
-+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
-+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
-+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
-+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
-+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-+ bus-range = <0x00 0xff>;
-+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
-+ status = "disabled";
-+
-+ pcie0: pcie@0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges;
-+ status = "disabled";
-+
-+ num-lanes = <1>;
-+ interrupt-map-mask = <0 0 0 7>;
-+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-+ <0 0 0 2 &pcie_intc0 1>,
-+ <0 0 0 3 &pcie_intc0 2>,
-+ <0 0 0 4 &pcie_intc0 3>;
-+ pcie_intc0: interrupt-controller {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ };
-+ };
-+
-+ pcie1: pcie@1,0 {
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges;
-+ status = "disabled";
-+
-+ num-lanes = <1>;
-+ interrupt-map-mask = <0 0 0 7>;
-+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-+ <0 0 0 2 &pcie_intc1 1>,
-+ <0 0 0 3 &pcie_intc1 2>,
-+ <0 0 0 4 &pcie_intc1 3>;
-+ pcie_intc1: interrupt-controller {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ };
-+ };
-+ };
-+
- ethsys: syscon@1b000000 {
- compatible = "mediatek,mt7622-ethsys",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0220-arm64-dts-mt7622-add-SATA-device-nodes.patch b/target/linux/mediatek/patches-4.14/0220-arm64-dts-mt7622-add-SATA-device-nodes.patch
deleted file mode 100644
index 18f3e63ac5..0000000000
--- a/target/linux/mediatek/patches-4.14/0220-arm64-dts-mt7622-add-SATA-device-nodes.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 0c8d249a70818f4f8e0d5543dc7157dfd8a5265e Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Wed, 20 Dec 2017 16:04:24 +0800
-Subject: [PATCH 220/224] arm64: dts: mt7622: add SATA device nodes
-
-This patch adds SATA support fot MT7622.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 ++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 40 ++++++++++++++++++++++++++++
- 2 files changed, 48 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -323,6 +323,14 @@
- status = "okay";
- };
-
-+&sata {
-+ status = "okay";
-+};
-+
-+&sata_phy {
-+ status = "okay";
-+};
-+
- &spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -9,6 +9,7 @@
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt7622-clk.h>
-+#include <dt-bindings/phy/phy.h>
- #include <dt-bindings/power/mt7622-power.h>
- #include <dt-bindings/reset/mt7622-reset.h>
- #include <dt-bindings/thermal/thermal.h>
-@@ -616,6 +617,45 @@
- };
- };
-
-+ sata: sata@1a200000 {
-+ compatible = "mediatek,mt7622-ahci",
-+ "mediatek,mtk-ahci";
-+ reg = <0 0x1a200000 0 0x1100>;
-+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hostc";
-+ clocks = <&pciesys CLK_SATA_AHB_EN>,
-+ <&pciesys CLK_SATA_AXI_EN>,
-+ <&pciesys CLK_SATA_ASIC_EN>,
-+ <&pciesys CLK_SATA_RBC_EN>,
-+ <&pciesys CLK_SATA_PM_EN>;
-+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
-+ phys = <&sata_port PHY_TYPE_SATA>;
-+ phy-names = "sata-phy";
-+ ports-implemented = <0x1>;
-+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-+ <&pciesys MT7622_SATA_PHY_SW_RST>,
-+ <&pciesys MT7622_SATA_PHY_REG_RST>;
-+ reset-names = "axi", "sw", "reg";
-+ mediatek,phy-mode = <&pciesys>;
-+ status = "disabled";
-+ };
-+
-+ sata_phy: sata-phy@1a243000 {
-+ compatible = "mediatek,generic-tphy-v1";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ sata_port: sata-phy@1a243000 {
-+ reg = <0 0x1a243000 0 0x0100>;
-+ clocks = <&topckgen CLK_TOP_ETH_500M>;
-+ clock-names = "ref";
-+ #phy-cells = <1>;
-+ };
-+ };
-+
- ethsys: syscon@1b000000 {
- compatible = "mediatek,mt7622-ethsys",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0221-arm64-dts-mt7622-add-usb-device-nodes.patch b/target/linux/mediatek/patches-4.14/0221-arm64-dts-mt7622-add-usb-device-nodes.patch
deleted file mode 100644
index 03982c96d7..0000000000
--- a/target/linux/mediatek/patches-4.14/0221-arm64-dts-mt7622-add-usb-device-nodes.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 3e23988f5c9c5d54732eda1e8017409ef223048b Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 12 Jan 2018 12:28:31 +0800
-Subject: [PATCH 221/224] arm64: dts: mt7622: add usb device nodes
-
-add xhci node and usb3 phy nodes
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Tested-by: Jumin Li <jumin.li@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 28 +++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 51 ++++++++++++++++++++++++++++
- 2 files changed, 79 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -52,6 +52,24 @@
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-3.3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_5v: regulator-5v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-5V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
- };
-
- &pcie {
-@@ -343,6 +361,16 @@
- status = "okay";
- };
-
-+&ssusb {
-+ vusb33-supply = <&reg_3p3v>;
-+ vbus-supply = <&reg_5v>;
-+ status = "okay";
-+};
-+
-+&u3phy {
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -535,6 +535,57 @@
- #reset-cells = <1>;
- };
-
-+ ssusb: usb@1a0c0000 {
-+ compatible = "mediatek,mt7622-xhci",
-+ "mediatek,mtk-xhci";
-+ reg = <0 0x1a0c0000 0 0x01000>,
-+ <0 0x1a0c4700 0 0x0100>;
-+ reg-names = "mac", "ippc";
-+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
-+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
-+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
-+ <&ssusbsys CLK_SSUSB_REF_EN>,
-+ <&ssusbsys CLK_SSUSB_MCU_EN>,
-+ <&ssusbsys CLK_SSUSB_DMA_EN>;
-+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
-+ phys = <&u2port0 PHY_TYPE_USB2>,
-+ <&u3port0 PHY_TYPE_USB3>,
-+ <&u2port1 PHY_TYPE_USB2>;
-+
-+ status = "disabled";
-+ };
-+
-+ u3phy: usb-phy@1a0c4000 {
-+ compatible = "mediatek,mt7622-u3phy",
-+ "mediatek,generic-tphy-v1";
-+ reg = <0 0x1a0c4000 0 0x700>;
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ u2port0: usb-phy@1a0c4800 {
-+ reg = <0 0x1a0c4800 0 0x0100>;
-+ #phy-cells = <1>;
-+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
-+ clock-names = "ref";
-+ };
-+
-+ u3port0: usb-phy@1a0c4900 {
-+ reg = <0 0x1a0c4900 0 0x0700>;
-+ #phy-cells = <1>;
-+ clocks = <&clk25m>;
-+ clock-names = "ref";
-+ };
-+
-+ u2port1: usb-phy@1a0c5000 {
-+ reg = <0 0x1a0c5000 0 0x0100>;
-+ #phy-cells = <1>;
-+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
-+ clock-names = "ref";
-+ };
-+ };
-+
- pciesys: pciesys@1a100800 {
- compatible = "mediatek,mt7622-pciesys",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0222-arm64-dts-mt7622-add-High-Speed-DMA-device-nodes.patch b/target/linux/mediatek/patches-4.14/0222-arm64-dts-mt7622-add-High-Speed-DMA-device-nodes.patch
deleted file mode 100644
index 5c83ff6ade..0000000000
--- a/target/linux/mediatek/patches-4.14/0222-arm64-dts-mt7622-add-High-Speed-DMA-device-nodes.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From c61ef9c4707e38edeafad1bd4d01080d0e0a10da Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Wed, 17 Jan 2018 00:52:27 +0800
-Subject: [PATCH 222/224] arm64: dts: mt7622: add High-Speed DMA device nodes
-
-add High-Speed DMA (HSDMA) nodes
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -715,6 +715,16 @@
- #reset-cells = <1>;
- };
-
-+ hsdma: dma-controller@1b007000 {
-+ compatible = "mediatek,mt7622-hsdma";
-+ reg = <0 0x1b007000 0 0x1000>;
-+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&ethsys CLK_ETH_HSDMA_EN>;
-+ clock-names = "hsdma";
-+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
-+ #dma-cells = <1>;
-+ };
-+
- eth: ethernet@1b100000 {
- compatible = "mediatek,mt7622-eth",
- "mediatek,mt2701-eth",
diff --git a/target/linux/mediatek/patches-4.14/0223-arm64-dts-mt7622-add-mmc-related-device-nodes.patch b/target/linux/mediatek/patches-4.14/0223-arm64-dts-mt7622-add-mmc-related-device-nodes.patch
deleted file mode 100644
index 7d28e2b567..0000000000
--- a/target/linux/mediatek/patches-4.14/0223-arm64-dts-mt7622-add-mmc-related-device-nodes.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From d41d41bfcbd8ad4bcbb1b433f7d5c3b613c58419 Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Mon, 22 Jan 2018 16:58:36 +0800
-Subject: [PATCH 223/224] arm64: dts: mt7622: add mmc related device nodes
-
-add mmc device nodes and proper setup for used pins
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Jimin Wang <jimin.wang@mediatek.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 106 +++++++++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 20 +++++
- 2 files changed, 126 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -8,6 +8,7 @@
-
- /dts-v1/;
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/gpio/gpio.h>
-
- #include "mt7622.dtsi"
- #include "mt6380.dtsi"
-@@ -53,6 +54,14 @@
- reg = <0 0x40000000 0 0x3F000000>;
- };
-
-+ reg_1p8v: regulator-1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-1.8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
-@@ -89,6 +98,23 @@
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-+
-+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
-+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
-+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
-+ */
-+ conf-cmd-dat {
-+ pins = "NDL0", "NDL1", "NDL2",
-+ "NDL3", "NDL4", "NDL5",
-+ "NDL6", "NDL7", "NRB";
-+ input-enable;
-+ bias-pull-up;
-+ };
-+
-+ conf-clk {
-+ pins = "NCLE";
-+ bias-pull-down;
-+ };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
-@@ -96,6 +122,21 @@
- function = "emmc";
- groups = "emmc";
- };
-+
-+ conf-cmd-dat {
-+ pins = "NDL0", "NDL1", "NDL2",
-+ "NDL3", "NDL4", "NDL5",
-+ "NDL6", "NDL7", "NRB";
-+ input-enable;
-+ drive-strength = <4>;
-+ bias-pull-up;
-+ };
-+
-+ conf-clk {
-+ pins = "NCLE";
-+ drive-strength = <4>;
-+ bias-pull-down;
-+ };
- };
-
- eth_pins: eth-pins {
-@@ -194,6 +235,27 @@
- function = "sd";
- groups = "sd_0";
- };
-+
-+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
-+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
-+ * DAT2, DAT3, CMD, CLK for SD respectively.
-+ */
-+ conf-cmd-data {
-+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
-+ "I2S2_IN","I2S4_OUT";
-+ input-enable;
-+ drive-strength = <8>;
-+ bias-pull-up;
-+ };
-+ conf-clk {
-+ pins = "I2S3_OUT";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ };
-+ conf-cd {
-+ pins = "TXD3";
-+ bias-pull-up;
-+ };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
-@@ -201,6 +263,18 @@
- function = "sd";
- groups = "sd_0";
- };
-+
-+ conf-cmd-data {
-+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
-+ "I2S2_IN","I2S4_OUT";
-+ input-enable;
-+ bias-pull-up;
-+ };
-+
-+ conf-clk {
-+ pins = "I2S3_OUT";
-+ bias-pull-down;
-+ };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
-@@ -311,6 +385,38 @@
- status = "okay";
- };
-
-+&mmc0 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&emmc_pins_default>;
-+ pinctrl-1 = <&emmc_pins_uhs>;
-+ status = "okay";
-+ bus-width = <8>;
-+ max-frequency = <50000000>;
-+ cap-mmc-highspeed;
-+ mmc-hs200-1_8v;
-+ vmmc-supply = <&reg_3p3v>;
-+ vqmmc-supply = <&reg_1p8v>;
-+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
-+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-+ non-removable;
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&sd0_pins_default>;
-+ pinctrl-1 = <&sd0_pins_uhs>;
-+ status = "okay";
-+ bus-width = <4>;
-+ max-frequency = <50000000>;
-+ cap-sd-highspeed;
-+ r_smpl = <1>;
-+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
-+ vmmc-supply = <&reg_3p3v>;
-+ vqmmc-supply = <&reg_3p3v>;
-+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
-+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-+};
-+
- &nandc {
- pinctrl-names = "default";
- pinctrl-0 = <&parallel_nand_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -527,6 +527,26 @@
- status = "disabled";
- };
-
-+ mmc0: mmc@11230000 {
-+ compatible = "mediatek,mt7622-mmc";
-+ reg = <0 0x11230000 0 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
-+ <&topckgen CLK_TOP_MSDC50_0_SEL>;
-+ clock-names = "source", "hclk";
-+ status = "disabled";
-+ };
-+
-+ mmc1: mmc@11240000 {
-+ compatible = "mediatek,mt7622-mmc";
-+ reg = <0 0x11240000 0 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
-+ <&topckgen CLK_TOP_AXI_SEL>;
-+ clock-names = "source", "hclk";
-+ status = "disabled";
-+ };
-+
- ssusbsys: ssusbsys@1a000000 {
- compatible = "mediatek,mt7622-ssusbsys",
- "syscon";
diff --git a/target/linux/mediatek/patches-4.14/0224-add-mt7622-defconfig-for-testing-these-new-drivers.patch b/target/linux/mediatek/patches-4.14/0224-add-mt7622-defconfig-for-testing-these-new-drivers.patch
deleted file mode 100644
index a39c5267cc..0000000000
--- a/target/linux/mediatek/patches-4.14/0224-add-mt7622-defconfig-for-testing-these-new-drivers.patch
+++ /dev/null
@@ -1,288 +0,0 @@
-From 4d4581541ee9bc4b7aee5e75db561a8128f3a8bd Mon Sep 17 00:00:00 2001
-From: Sean Wang <sean.wang@mediatek.com>
-Date: Fri, 1 Dec 2017 10:57:57 +0800
-Subject: [PATCH 224/224] add mt7622 defconfig for testing these new drivers
-
----
- arch/arm64/configs/mt7622_rfb1_defconfig | 275 +++++++++++++++++++++++++++++++
- 1 file changed, 275 insertions(+)
- create mode 100644 arch/arm64/configs/mt7622_rfb1_defconfig
-
---- /dev/null
-+++ b/arch/arm64/configs/mt7622_rfb1_defconfig
-@@ -0,0 +1,275 @@
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_DEFAULT_HOSTNAME="(mt7622)"
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_CROSS_MEMORY_ATTACH is not set
-+CONFIG_NO_HZ_IDLE=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_IRQ_TIME_ACCOUNTING=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+# CONFIG_UTS_NS is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE="../prebuilt/bootable/7622_loader/rootfs.cpio.gz"
-+# CONFIG_RD_BZIP2 is not set
-+# CONFIG_RD_XZ is not set
-+# CONFIG_RD_LZO is not set
-+# CONFIG_RD_LZ4 is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_PERF_EVENTS=y
-+# CONFIG_COMPAT_BRK is not set
-+CONFIG_JUMP_LABEL=y
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_ARCH_MEDIATEK=y
-+CONFIG_PCI=y
-+CONFIG_PCI_DEBUG=y
-+CONFIG_PCIE_MEDIATEK=y
-+CONFIG_SCHED_MC=y
-+CONFIG_NR_CPUS=2
-+CONFIG_PREEMPT=y
-+# CONFIG_COMPACTION is not set
-+# CONFIG_BOUNCE is not set
-+# CONFIG_EFI is not set
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_COMPAT=y
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_STAT=y
-+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-+CONFIG_ARM_MEDIATEK_CPUFREQ=y
-+CONFIG_NET=y
-+CONFIG_PACKET=y
-+CONFIG_INET=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_IPV6 is not set
-+CONFIG_BT=y
-+CONFIG_BT_RFCOMM=y
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=y
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+CONFIG_BT_HIDP=y
-+# CONFIG_BT_HS is not set
-+# CONFIG_BT_LE is not set
-+CONFIG_BT_HCIUART=y
-+CONFIG_BT_HCIVHCI=y
-+CONFIG_DEVTMPFS=y
-+CONFIG_DEVTMPFS_MOUNT=y
-+CONFIG_MTD=y
-+# CONFIG_MTD_OF_PARTS is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_MTK=y
-+CONFIG_MTD_SPI_NOR=y
-+CONFIG_MTD_MT81xx_NOR=y
-+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-+# CONFIG_BLK_DEV is not set
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_ATA=y
-+CONFIG_AHCI_MTK=y
-+CONFIG_NETDEVICES=y
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_NET_VENDOR_ADAPTEC is not set
-+# CONFIG_NET_VENDOR_AGERE is not set
-+# CONFIG_NET_VENDOR_ALACRITECH is not set
-+# CONFIG_NET_VENDOR_ALTEON is not set
-+# CONFIG_NET_VENDOR_AMAZON is not set
-+# CONFIG_NET_VENDOR_AMD is not set
-+# CONFIG_NET_VENDOR_AQUANTIA is not set
-+# CONFIG_NET_VENDOR_ARC is not set
-+# CONFIG_NET_VENDOR_ATHEROS is not set
-+# CONFIG_NET_CADENCE is not set
-+# CONFIG_NET_VENDOR_BROADCOM is not set
-+# CONFIG_NET_VENDOR_BROCADE is not set
-+# CONFIG_NET_VENDOR_CAVIUM is not set
-+# CONFIG_NET_VENDOR_CHELSIO is not set
-+# CONFIG_NET_VENDOR_CISCO is not set
-+# CONFIG_NET_VENDOR_DEC is not set
-+# CONFIG_NET_VENDOR_DLINK is not set
-+# CONFIG_NET_VENDOR_EMULEX is not set
-+# CONFIG_NET_VENDOR_EZCHIP is not set
-+# CONFIG_NET_VENDOR_EXAR is not set
-+# CONFIG_NET_VENDOR_HISILICON is not set
-+# CONFIG_NET_VENDOR_HP is not set
-+# CONFIG_NET_VENDOR_HUAWEI is not set
-+# CONFIG_NET_VENDOR_INTEL is not set
-+# CONFIG_NET_VENDOR_MARVELL is not set
-+CONFIG_NET_VENDOR_MEDIATEK=y
-+CONFIG_NET_MEDIATEK_SOC=y
-+# CONFIG_NET_VENDOR_MELLANOX is not set
-+# CONFIG_NET_VENDOR_MICREL is not set
-+# CONFIG_NET_VENDOR_MICROCHIP is not set
-+# CONFIG_NET_VENDOR_MYRI is not set
-+# CONFIG_NET_VENDOR_NATSEMI is not set
-+# CONFIG_NET_VENDOR_NETRONOME is not set
-+# CONFIG_NET_VENDOR_NVIDIA is not set
-+# CONFIG_NET_VENDOR_OKI is not set
-+# CONFIG_NET_PACKET_ENGINE is not set
-+# CONFIG_NET_VENDOR_QLOGIC is not set
-+# CONFIG_NET_VENDOR_QUALCOMM is not set
-+# CONFIG_NET_VENDOR_REALTEK is not set
-+# CONFIG_NET_VENDOR_RENESAS is not set
-+# CONFIG_NET_VENDOR_RDC is not set
-+# CONFIG_NET_VENDOR_ROCKER is not set
-+# CONFIG_NET_VENDOR_SAMSUNG is not set
-+# CONFIG_NET_VENDOR_SEEQ is not set
-+# CONFIG_NET_VENDOR_SILAN is not set
-+# CONFIG_NET_VENDOR_SIS is not set
-+# CONFIG_NET_VENDOR_SOLARFLARE is not set
-+# CONFIG_NET_VENDOR_SMSC is not set
-+# CONFIG_NET_VENDOR_STMICRO is not set
-+# CONFIG_NET_VENDOR_SUN is not set
-+# CONFIG_NET_VENDOR_TEHUTI is not set
-+# CONFIG_NET_VENDOR_TI is not set
-+# CONFIG_NET_VENDOR_VIA is not set
-+# CONFIG_NET_VENDOR_WIZNET is not set
-+# CONFIG_NET_VENDOR_SYNOPSYS is not set
-+CONFIG_ICPLUS_PHY=y
-+CONFIG_REALTEK_PHY=y
-+CONFIG_USB_CATC=y
-+CONFIG_USB_KAWETH=y
-+CONFIG_USB_PEGASUS=y
-+CONFIG_USB_RTL8150=y
-+CONFIG_USB_RTL8152=y
-+CONFIG_USB_LAN78XX=y
-+CONFIG_USB_USBNET=y
-+CONFIG_USB_NET_CDC_EEM=y
-+CONFIG_USB_NET_HUAWEI_CDC_NCM=y
-+CONFIG_USB_NET_CDC_MBIM=y
-+CONFIG_USB_NET_DM9601=y
-+CONFIG_USB_NET_SR9700=y
-+CONFIG_USB_NET_SR9800=y
-+CONFIG_USB_NET_SMSC75XX=y
-+CONFIG_USB_NET_SMSC95XX=y
-+CONFIG_USB_NET_GL620A=y
-+CONFIG_USB_NET_PLUSB=y
-+CONFIG_USB_NET_MCS7830=y
-+CONFIG_USB_NET_RNDIS_HOST=y
-+CONFIG_USB_ALI_M5632=y
-+CONFIG_USB_AN2720=y
-+CONFIG_USB_EPSON2888=y
-+CONFIG_USB_KC2190=y
-+CONFIG_USB_NET_CX82310_ETH=y
-+CONFIG_USB_NET_KALMIA=y
-+CONFIG_USB_NET_QMI_WWAN=y
-+CONFIG_USB_NET_INT51X1=y
-+CONFIG_USB_IPHETH=y
-+CONFIG_USB_SIERRA_NET=y
-+CONFIG_USB_VL600=y
-+CONFIG_USB_NET_CH9200=y
-+CONFIG_INPUT_EVDEV=y
-+CONFIG_INPUT_EVBUG=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+CONFIG_KEYBOARD_GPIO_POLLED=y
-+# CONFIG_INPUT_MOUSE is not set
-+CONFIG_SERIO_LIBPS2=y
-+CONFIG_VT_HW_CONSOLE_BINDING=y
-+CONFIG_LEGACY_PTY_COUNT=16
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_NR_UARTS=3
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-+CONFIG_SERIAL_8250_MT6577=y
-+CONFIG_SERIAL_OF_PLATFORM=y
-+CONFIG_SERIAL_DEV_BUS=y
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_MT65XX=y
-+CONFIG_I2C_SLAVE=y
-+CONFIG_I2C_DEBUG_CORE=y
-+CONFIG_I2C_DEBUG_ALGO=y
-+CONFIG_I2C_DEBUG_BUS=y
-+CONFIG_SPI=y
-+CONFIG_SPI_MT65XX=y
-+CONFIG_DEBUG_PINCTRL=y
-+CONFIG_PINCTRL_MT7622=y
-+# CONFIG_PINCTRL_MT8173 is not set
-+# CONFIG_PINCTRL_MT6397 is not set
-+CONFIG_POWER_RESET_SYSCON=y
-+# CONFIG_HWMON is not set
-+CONFIG_THERMAL=y
-+CONFIG_THERMAL_WRITABLE_TRIPS=y
-+CONFIG_THERMAL_GOV_FAIR_SHARE=y
-+CONFIG_THERMAL_GOV_BANG_BANG=y
-+CONFIG_THERMAL_GOV_USER_SPACE=y
-+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-+CONFIG_CPU_THERMAL=y
-+CONFIG_CLOCK_THERMAL=y
-+CONFIG_THERMAL_EMULATION=y
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_SYSFS=y
-+CONFIG_MEDIATEK_WATCHDOG=y
-+CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
-+CONFIG_MFD_MT6397=y
-+CONFIG_REGULATOR=y
-+CONFIG_REGULATOR_DEBUG=y
-+CONFIG_REGULATOR_FIXED_VOLTAGE=y
-+CONFIG_REGULATOR_MT6323=y
-+CONFIG_REGULATOR_MT6380=y
-+CONFIG_RC_CORE=y
-+CONFIG_RC_DEVICES=y
-+CONFIG_IR_MTK=y
-+CONFIG_MEDIA_SUPPORT=y
-+CONFIG_USB=y
-+# CONFIG_USB_PCI is not set
-+# CONFIG_USB_DEFAULT_PERSIST is not set
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_MTK=y
-+CONFIG_USB_STORAGE=y
-+CONFIG_USB_STORAGE_DEBUG=y
-+CONFIG_MMC=y
-+CONFIG_MMC_MTK=y
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_USER=y
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_ONESHOT=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-+CONFIG_LEDS_TRIGGER_CPU=y
-+CONFIG_LEDS_TRIGGER_ACTIVITY=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_DRV_MT7622=y
-+CONFIG_DMADEVICES=y
-+CONFIG_MTK_HSDMA=y
-+CONFIG_DMATEST=y
-+# CONFIG_COMMON_CLK_XGENE is not set
-+# CONFIG_COMMON_CLK_MT6797 is not set
-+CONFIG_COMMON_CLK_MT7622_ETHSYS=y
-+CONFIG_COMMON_CLK_MT7622_HIFSYS=y
-+CONFIG_COMMON_CLK_MT7622_AUDSYS=y
-+# CONFIG_COMMON_CLK_MT8173 is not set
-+# CONFIG_IOMMU_SUPPORT is not set
-+CONFIG_MTK_PMIC_WRAP=y
-+CONFIG_IIO=y
-+CONFIG_MEDIATEK_MT6577_AUXADC=y
-+CONFIG_PWM=y
-+CONFIG_PWM_MEDIATEK=y
-+CONFIG_RESET_CONTROLLER=y
-+CONFIG_PHY_MTK_TPHY=y
-+CONFIG_MTK_EFUSE=y
-+CONFIG_TMPFS=y
-+# CONFIG_MISC_FILESYSTEMS is not set
-+CONFIG_PRINTK_TIME=y
-+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
-+CONFIG_DYNAMIC_DEBUG=y
-+# CONFIG_ENABLE_WARN_DEPRECATED is not set
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_DEBUG_FS=y
-+CONFIG_DEBUG_SECTION_MISMATCH=y
-+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_FTRACE is not set
diff --git a/target/linux/mediatek/patches-4.14/0225-arm-dts-Add-missing-mt7623-pcie-nodes.patch b/target/linux/mediatek/patches-4.14/0225-arm-dts-Add-missing-mt7623-pcie-nodes.patch
deleted file mode 100644
index c5eb54ae44..0000000000
--- a/target/linux/mediatek/patches-4.14/0225-arm-dts-Add-missing-mt7623-pcie-nodes.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From d31800ff6ed81f44488b590fe372e7b6572d2896 Mon Sep 17 00:00:00 2001
-From: Kristian Evensen <kristian.evensen@gmail.com>
-Date: Sun, 17 Jun 2018 14:18:45 +0200
-Subject: [PATCH] arm: dts: Add missing mt7623 pcie nodes
-
----
- arch/arm/boot/dts/mt7623.dtsi | 105 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 105 insertions(+)
-
---- a/arch/arm/boot/dts/mt7623.dtsi
-+++ b/arch/arm/boot/dts/mt7623.dtsi
-@@ -674,6 +674,111 @@
- #reset-cells = <1>;
- };
-
-+ pcie: pcie@1a140000 {
-+ compatible = "mediatek,mt7623-pcie";
-+ device_type = "pci";
-+ reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
-+ <0 0x1a142000 0 0x1000>, /* Port0 registers */
-+ <0 0x1a143000 0 0x1000>, /* Port1 registers */
-+ <0 0x1a144000 0 0x1000>; /* Port2 registers */
-+ reg-names = "subsys", "port0", "port1", "port2";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0xf800 0 0 0>;
-+ interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
-+ <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
-+ <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-+ <&hifsys CLK_HIFSYS_PCIE0>,
-+ <&hifsys CLK_HIFSYS_PCIE1>,
-+ <&hifsys CLK_HIFSYS_PCIE2>;
-+ clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
-+ resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
-+ <&hifsys MT2701_HIFSYS_PCIE1_RST>,
-+ <&hifsys MT2701_HIFSYS_PCIE2_RST>;
-+ reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
-+ phys = <&pcie0_port PHY_TYPE_PCIE>,
-+ <&pcie1_port PHY_TYPE_PCIE>,
-+ <&u3port1 PHY_TYPE_PCIE>;
-+ phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-+ bus-range = <0x00 0xff>;
-+ status = "disabled";
-+ ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
-+ 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
-+
-+ pcie@0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
-+ ranges;
-+ num-lanes = <1>;
-+ status = "disabled";
-+ };
-+ pcie@1,0 {
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-+ ranges;
-+ num-lanes = <1>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-+ ranges;
-+ num-lanes = <1>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ pcie0_phy: pcie-phy@1a149000 {
-+ compatible = "mediatek,generic-tphy-v1";
-+ reg = <0 0x1a149000 0 0x0700>;
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ pcie0_port: pcie-phy@1a149900 {
-+ reg = <0 0x1a149900 0 0x0700>;
-+ clocks = <&clk26m>;
-+ clock-names = "ref";
-+ #phy-cells = <1>;
-+ status = "okay";
-+ };
-+ };
-+
-+ pcie1_phy: pcie-phy@1a14a000 {
-+ compatible = "mediatek,generic-tphy-v1";
-+ reg = <0 0x1a14a000 0 0x0700>;
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ pcie1_port: pcie-phy@1a14a900 {
-+ reg = <0 0x1a14a900 0 0x0700>;
-+ clocks = <&clk26m>;
-+ clock-names = "ref";
-+ #phy-cells = <1>;
-+ status = "okay";
-+ };
-+ };
-+
-+
- usb1: usb@1a1c0000 {
- compatible = "mediatek,mt7623-xhci",
- "mediatek,mt8173-xhci";
diff --git a/target/linux/mediatek/patches-4.14/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch b/target/linux/mediatek/patches-4.14/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch
deleted file mode 100644
index b480e9b4ca..0000000000
--- a/target/linux/mediatek/patches-4.14/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 28f9a5e2a3f5441ab5594669ed82da11e32277a9 Mon Sep 17 00:00:00 2001
-From: Kristian Evensen <kristian.evensen@gmail.com>
-Date: Mon, 30 Apr 2018 14:38:01 +0200
-Subject: [PATCH] phy: phy-mtk-tphy: Add hifsys-support
-
----
- drivers/phy/mediatek/phy-mtk-tphy.c | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/drivers/phy/mediatek/phy-mtk-tphy.c
-+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
-@@ -23,6 +23,8 @@
- #include <linux/of_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- /* version V1 sub-banks offset base address */
- /* banks shared by multiple phys */
-@@ -262,6 +264,9 @@
- #define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
- #define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
-
-+#define HIF_SYSCFG1 0x14
-+#define HIF_SYSCFG1_PHY2_MASK (0x3 << 20)
-+
- enum mtk_phy_version {
- MTK_PHY_V1 = 1,
- MTK_PHY_V2,
-@@ -305,6 +310,7 @@ struct mtk_tphy {
- struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
- const struct mtk_phy_pdata *pdata;
- struct mtk_phy_instance **phys;
-+ struct regmap *hif;
- int nphys;
- };
-
-@@ -617,6 +623,10 @@ static void pcie_phy_instance_init(struc
- if (tphy->pdata->version != MTK_PHY_V1)
- return;
-
-+ if (tphy->hif)
-+ regmap_update_bits(tphy->hif, HIF_SYSCFG1,
-+ HIF_SYSCFG1_PHY2_MASK, 0);
-+
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
- tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
- tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
-@@ -1042,6 +1052,16 @@ static int mtk_tphy_probe(struct platfor
- tphy->u3phya_ref = NULL;
- }
-
-+ if (of_find_property(np, "mediatek,phy-switch", NULL)) {
-+ tphy->hif = syscon_regmap_lookup_by_phandle(np,
-+ "mediatek,phy-switch");
-+ if (IS_ERR(tphy->hif)) {
-+ dev_err(&pdev->dev,
-+ "missing \"mediatek,phy-switch\" phandle\n");
-+ return PTR_ERR(tphy->hif);
-+ }
-+ }
-+
- port = 0;
- for_each_child_of_node(np, child_np) {
- struct mtk_phy_instance *instance;
diff --git a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch
deleted file mode 100644
index cc3758119a..0000000000
--- a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch
+++ /dev/null
@@ -1,413 +0,0 @@
-From 004eb24e939b5b31f828333f37fb5cb2a877d6f2 Mon Sep 17 00:00:00 2001
-From: Kristian Evensen <kristian.evensen@gmail.com>
-Date: Sun, 17 Jun 2018 14:41:47 +0200
-Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
-
----
- arch/arm/boot/dts/Makefile | 1 +
- .../dts/mt7623a-unielec-u7623-02-emmc-512m.dts | 18 +
- .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi | 366 +++++++++++++++++++++
- 3 files changed, 385 insertions(+)
- create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
- create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
- mt6580-evbp1.dtb \
- mt6589-aquaris5.dtb \
- mt6592-evb.dtb \
-+ mt7623a-unielec-u7623-02-emmc-512m.dtb \
- mt7623n-rfb-nand.dtb \
- mt7623n-bananapi-bpi-r2.dtb \
- mt8127-moose.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+ */
-+
-+/dts-v1/;
-+#include "mt7623a-unielec-u7623-02-emmc.dtsi"
-+
-+/ {
-+ model = "UniElec U7623-02 eMMC (512M RAM)";
-+ compatible = "unielec,u7623-02-emmc-512m", "unielec,u7623-02-emmc", "mediatek,mt7623";
-+
-+ memory@80000000 {
-+ device_type = "memory";
-+ reg = <0 0x80000000 0 0x20000000>;
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-@@ -0,0 +1,366 @@
-+/*
-+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+ */
-+
-+#include <dt-bindings/input/input.h>
-+#include "mt7623.dtsi"
-+#include "mt6323.dtsi"
-+
-+/ {
-+ compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
-+
-+ aliases {
-+ serial2 = &uart2;
-+ };
-+
-+ chosen {
-+ bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs";
-+ stdout-path = "serial2:115200n8";
-+ };
-+
-+ cpus {
-+ cpu@0 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@1 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@2 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@3 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+ };
-+
-+ reg_1p8v: regulator-1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-1.8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-3.3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_5v: regulator-5v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-5V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&key_pins_a>;
-+
-+ factory {
-+ label = "factory";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_unielec>;
-+
-+ led3 {
-+ label = "u7623-01:green:led3";
-+ gpios = <&pio 14 GPIO_ACTIVE_LOW>;
-+ default-state = "off";
-+ };
-+
-+ led4 {
-+ label = "u7623-01:green:led4";
-+ gpios = <&pio 15 GPIO_ACTIVE_LOW>;
-+ default-state = "off";
-+ };
-+ };
-+
-+ mt7530: switch@0 {
-+ compatible = "mediatek,mt7530";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+};
-+
-+&crypto {
-+ status = "okay";
-+};
-+
-+&eth {
-+ status = "okay";
-+
-+ gmac0: mac@0 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <0>;
-+ phy-mode = "trgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
-+ mdio: mdio-bus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ phy5: ethernet-phy@5 {
-+ reg = <5>;
-+ phy-mode = "rgmii-rxid";
-+ };
-+ };
-+};
-+
-+&mt7530 {
-+ compatible = "mediatek,mt7530";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ mediatek,mcm;
-+ resets = <&ethsys 2>;
-+ reset-names = "mcm";
-+ core-supply = <&mt6323_vpa_reg>;
-+ io-supply = <&mt6323_vemc3v3_reg>;
-+
-+ dsa,mii-bus = <&mdio>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan0";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan1";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan3";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ cpu_port0: port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "trgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc0_pins_default>;
-+ pinctrl-1 = <&mmc0_pins_uhs>;
-+ status = "okay";
-+ bus-width = <8>;
-+ max-frequency = <50000000>;
-+ cap-mmc-highspeed;
-+ vmmc-supply = <&reg_3p3v>;
-+ vqmmc-supply = <&reg_1p8v>;
-+ non-removable;
-+};
-+
-+&pio {
-+ key_pins_a: keys-alt {
-+ pins-keys {
-+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
-+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257>;
-+ input-enable;
-+ };
-+ };
-+
-+ led_pins_unielec: leds-unielec {
-+ pins-leds {
-+ pinmux = <MT7623_PIN_14_GPIO14_FUNC_GPIO14>,
-+ <MT7623_PIN_15_GPIO15_FUNC_GPIO15>;
-+ };
-+ };
-+
-+ mmc0_pins_default: mmc0default {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-+ input-enable;
-+ bias-pull-up;
-+ };
-+
-+ pins_clk {
-+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-+ bias-pull-down;
-+ };
-+
-+ pins_rst {
-+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mmc0_pins_uhs: mmc0 {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-+ input-enable;
-+ drive-strength = <MTK_DRIVE_2mA>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-+ };
-+
-+ pins_clk {
-+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-+ drive-strength = <MTK_DRIVE_2mA>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
-+ };
-+
-+ pins_rst {
-+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ pwm_pins_a: pwm@0 {
-+ pins_pwm {
-+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
-+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
-+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
-+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
-+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
-+ };
-+ };
-+
-+ uart2_pins_b: uart@2 {
-+ pins_dat {
-+ pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
-+ <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
-+ };
-+ };
-+
-+ pcie_default: pcie_pin_default {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
-+ <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
-+ bias-disable;
-+ };
-+ };
-+};
-+
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pins_a>;
-+ status = "okay";
-+};
-+
-+&pwrap {
-+ mt6323 {
-+ mt6323led: led {
-+ compatible = "mediatek,mt6323-led";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ led@0 {
-+ reg = <0>;
-+ label = "led0";
-+ default-state = "off";
-+ };
-+ };
-+ };
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins_b>;
-+ status = "okay";
-+};
-+
-+&usb1 {
-+ vusb33-supply = <&reg_3p3v>;
-+ vbus-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
-+
-+&u3phy1 {
-+ status = "okay";
-+};
-+
-+&u3phy2 {
-+ status = "okay";
-+ mediatek,phy-switch = <&hifsys>;
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_default>;
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ status = "okay";
-+ };
-+};
-+
-+&pcie1_phy {
-+ status = "okay";
-+};
-+