diff options
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9331_tl-mr10u.dts | 19 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr703n.dts | 136 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr703n.dtsi | 139 | ||||
| -rw-r--r-- | target/linux/ath79/image/tiny-tp-link.mk | 10 |
5 files changed, 172 insertions, 133 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index e6ef47240f..c02d9ff063 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -9,6 +9,7 @@ ath79_setup_interfaces() case "$board" in "avm,fritz300e"|\ + "tplink,tl-mr10u"|\ "tplink,tl-wr703n"|\ "ubnt,unifi") ucidef_set_interface_lan "eth0" diff --git a/target/linux/ath79/dts/ar9331_tl-mr10u.dts b/target/linux/ath79/dts/ar9331_tl-mr10u.dts new file mode 100644 index 0000000000..9a6947c951 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-mr10u.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9331_tl-wr703n.dtsi" + +/ { + model = "TP-Link MR10U"; + compatible = "tplink,tl-mr10u"; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + +}; diff --git a/target/linux/ath79/dts/ar9331_tl-wr703n.dts b/target/linux/ath79/dts/ar9331_tl-wr703n.dts index 70f94ed4cb..17747052e6 100644 --- a/target/linux/ath79/dts/ar9331_tl-wr703n.dts +++ b/target/linux/ath79/dts/ar9331_tl-wr703n.dts @@ -1,139 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" +#include "ar9331_tl-wr703n.dtsi" / { - compatible = "tplink,tl-wr703n", "qca,ar9331"; - model = "TP-Link TL-WR703N"; - - aliases { - serial0 = &uart; - led-status = &led_system; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_system: system { - label = "tl-wr703n:blue:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - }; - }; - - reg_usb_vbus: reg_usb_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - firmware: partition@20000 { - reg = <0x20000 0x3d0000>; - label = "firmware"; - }; - - art: partition@3f0000 { - reg = <0x3f0000 0x10000>; - label = "art"; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - phy-handle = <&phy4>; - - mtd-mac-address = <&uboot 0x1fc00>; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; - -&gpio { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -&uart { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - vbus-supply = <®_usb_vbus>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&uboot 0x1fc00>; + model = "TP-Link WR703N"; + compatible = "tplink,tl-wr703n"; }; diff --git a/target/linux/ath79/dts/ar9331_tl-wr703n.dtsi b/target/linux/ath79/dts/ar9331_tl-wr703n.dtsi new file mode 100644 index 0000000000..70f94ed4cb --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-wr703n.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9331.dtsi" + +/ { + compatible = "tplink,tl-wr703n", "qca,ar9331"; + model = "TP-Link TL-WR703N"; + + aliases { + serial0 = &uart; + led-status = &led_system; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_system: system { + label = "tl-wr703n:blue:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + firmware: partition@20000 { + reg = <0x20000 0x3d0000>; + label = "firmware"; + }; + + art: partition@3f0000 { + reg = <0x3f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "mii"; + }; +}; + +&uart { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk index e6d5feefc5..f92c7d9644 100644 --- a/target/linux/ath79/image/tiny-tp-link.mk +++ b/target/linux/ath79/image/tiny-tp-link.mk @@ -1,6 +1,16 @@ include ./common-tp-link.mk +define Device/tl-mr10u + $(Device/tplink-4mlzma) + ATH_SOC := ar9331 + DEVICE_TITLE := TP-Link TL-MR10U + DEVICE_PACKAGES := kmod-usb-chipidea2 + TPLINK_HWID := 0x00100101 + SUPPORTED_DEVICES := tplink,tl-mr10u tl-mr10u +endef +TARGET_DEVICES += tl-mr10u + define Device/tl-wr703n $(Device/tplink-4mlzma) ATH_SOC := ar9331 |