diff options
9 files changed, 101 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 0c2ae83c75..dbde1f7775 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -21,6 +21,9 @@ get_status_led() { br6425) status_led="edimax:green:power" ;; + d105) + status_led="d105:red:power" + ;; dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1) status_led="d-link:green:status" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index de5a542f38..6dd36d7403 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -64,6 +64,7 @@ case "$FIRMWARE" in broadway | \ br6524n | \ carambola | \ + d105 | \ dir-615-h1 | \ dir-620-a1 | \ esr-9753 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 65497266ee..bb8a5dcbd0 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -48,6 +48,10 @@ case $board in br6524n) set_wifi_led "edimax:blue:wlan" ;; + d105) + ucidef_set_led_default "power" "POWER" "d105:red:power" "1" + set_usb_led "d105:green:usb" + ;; dir-300-b1|\ dir-600-b1|\ dir-600-b2|\ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 7d30f72f08..d2400870c6 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -125,6 +125,7 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; + d105 | \ omni-emb-hpm|\ wli-tx4-ag300n) ucidef_set_interface_lan "eth0" @@ -249,6 +250,7 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) ;; + d105 | \ wli-tx4-ag300n) lan_mac=$(mtd_get_mac_binary factory 4) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index e860309ec4..985d1bc8f7 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -20,6 +20,7 @@ preinit_set_mac_address() { ;; bc2 |\ broadway |\ + d105 |\ dir-620-a1 |\ esr-9753 |\ freestation5 |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 2a713f8c65..4948e5b5cc 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -105,6 +105,9 @@ ramips_board_detect() { *"Hauppauge Broadway") name="broadway" ;; + *"Huawei D105") + name="d105" + ;; *"La Fonera 2.0N") name="fonera20n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a6f52cd143..e2a55feabb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -24,6 +24,7 @@ platform_check_image() { bc2 | \ broadway | \ carambola | \ + d105 | \ dir-300-b1 | \ dir-600-b1 | \ dir-600-b2 | \ diff --git a/target/linux/ramips/dts/D105.dts b/target/linux/ramips/dts/D105.dts new file mode 100644 index 0000000000..c6f420eda9 --- /dev/null +++ b/target/linux/ramips/dts/D105.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "D105", "ralink,rt3050-soc"; + model = "Huawei D105"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "d105:red:power"; + gpios = <&gpio0 0 1>; + }; + wps { + label = "d105:green:usb"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 01425b41d3..99ceb63f89 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -268,6 +268,8 @@ Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),b Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA) +Image/Build/Profile/D105=$(call BuildFirmware/Default4M/$(1),$(1),d105,D105) + define BuildFirmware/DIR300B1/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) -mkwrgimg -s $(4) -d /dev/mtdblock/2 \ @@ -409,6 +411,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/BROADWAY,$(1)) $(call Image/Build/Profile/CARAMBOLA,$(1)) + $(call Image/Build/Profile/D105,$(1)) $(call Image/Build/Profile/DIR-300-B1,$(1)) $(call Image/Build/Profile/DIR-600-B1,$(1)) $(call Image/Build/Profile/DIR-600-B2,$(1)) |