diff options
-rw-r--r-- | target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts | 32 | ||||
-rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 2 | ||||
-rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 6 |
3 files changed, 27 insertions, 13 deletions
diff --git a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts index d292b211af..c53289debf 100644 --- a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts +++ b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts @@ -46,7 +46,6 @@ led_power: power { label = "green:power"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - default-state = "keep"; }; internet { @@ -77,6 +76,23 @@ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; }; }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&firmware1 &firmware2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x0 0x1d20000>; + }; + }; + }; }; &spi0 { @@ -85,8 +101,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; - broken-flash-reset; + spi-max-frequency = <32000000>; partitions { compatible = "fixed-partitions"; @@ -106,14 +121,13 @@ }; factory: partition@40000 { - label = "factory"; + label = "rf-eeprom"; reg = <0x40000 0x10000>; read-only; }; - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; + firmware1: partition@50000 { + label = "firmware_1"; reg = <0x50000 0xe90000>; }; @@ -153,10 +167,9 @@ read-only; }; - partition@1050000 { + firmware2: partition@1050000 { label = "firmware_2"; reg = <0x1050000 0xe90000>; - read-only; }; partition@1ee0000 { @@ -189,6 +202,7 @@ &pcie0 { mt76@0,0 { + compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index f482872813..156aa634be 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -1029,7 +1029,7 @@ endef TARGET_DEVICES += zbtlink_zbt-we1226 define Device/zyxel_keenetic-extra-ii - IMAGE_SIZE := 14912k + IMAGE_SIZE := 29824k BLOCKSIZE := 64k DEVICE_VENDOR := ZyXEL DEVICE_MODEL := Keenetic Extra II diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 7570999a4e..bfd11fda2e 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -228,8 +228,7 @@ ramips_setup_macs() netgear,r6080|\ netgear,r6120|\ wrtnode,wrtnode2p|\ - wrtnode,wrtnode2r|\ - zyxel,keenetic-extra-ii) + wrtnode,wrtnode2r) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; hiwifi,hc5611|\ @@ -253,7 +252,8 @@ ramips_setup_macs() totolink,lr1200) wan_mac=$(mtd_get_mac_binary factory 0x2e) ;; - keenetic,kn-1613) + keenetic,kn-1613|\ + zyxel,keenetic-extra-ii) wan_mac=$(mtd_get_mac_binary rf-eeprom 0x28) ;; linksys,e5400) |