aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/kernel-version.mk4
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch10
-rw-r--r--target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch2
-rw-r--r--target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch8
-rw-r--r--target/linux/generic/backport-5.4/751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch65
-rw-r--r--target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch6
-rw-r--r--target/linux/generic/backport-5.4/754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch116
-rw-r--r--target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch4
-rw-r--r--target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch10
-rw-r--r--target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch9
-rw-r--r--target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch5
-rw-r--r--target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch5
-rw-r--r--target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch5
-rw-r--r--target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch5
-rw-r--r--target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch5
-rw-r--r--target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch5
-rw-r--r--target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch2
-rw-r--r--target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch2
-rw-r--r--target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch2
-rw-r--r--target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch4
-rw-r--r--target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch2
-rw-r--r--target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch268
-rw-r--r--target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch2
-rw-r--r--target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch38
-rw-r--r--target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch12
-rw-r--r--target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch198
-rw-r--r--target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch18
-rw-r--r--target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch120
-rw-r--r--target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch7
-rw-r--r--target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch9
30 files changed, 352 insertions, 596 deletions
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 3a446ffb18..89e26f6d96 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -8,11 +8,11 @@ endif
LINUX_VERSION-4.14 = .180
LINUX_VERSION-4.19 = .123
-LINUX_VERSION-5.4 = .43
+LINUX_VERSION-5.4 = .45
LINUX_KERNEL_HASH-4.14.180 = 444ef973d9b6a6ea174e4a9086f0aea980d8575d13302e431ad688f22e27ed0e
LINUX_KERNEL_HASH-4.19.123 = a79914d31a8d8c6b0e2bb0f2b143d615fe8a6c4dd2e0f36e97aa20efd69a993f
-LINUX_KERNEL_HASH-5.4.43 = 2667b90a42d42557aca9e3d37bba1b4e71809b9523958e6870ada311c4790744
+LINUX_KERNEL_HASH-5.4.45 = 103f039f34a9009c42ea643b4f473bda6bb9607d5ad7f63b56b3e2351615fe2e
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
diff --git a/target/linux/bcm27xx/patches-5.4/950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch b/target/linux/bcm27xx/patches-5.4/950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch
index 4286abf01a..bb32faef72 100644
--- a/target/linux/bcm27xx/patches-5.4/950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch
+++ b/target/linux/bcm27xx/patches-5.4/950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch
@@ -37,12 +37,14 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
gpiod_err(desc,
"%s: tried to set a GPIO tied to an IRQ as output\n",
__func__);
-@@ -3894,7 +3896,7 @@ int gpiochip_lock_as_irq(struct gpio_chi
- }
+@@ -3895,8 +3897,8 @@ int gpiochip_lock_as_irq(struct gpio_chi
}
-- if (test_bit(FLAG_IS_OUT, &desc->flags)) {
-+ if (dont_test_bit(FLAG_IS_OUT, &desc->flags)) {
+ /* To be valid for IRQ the line needs to be input or open drain */
+- if (test_bit(FLAG_IS_OUT, &desc->flags) &&
+- !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
++ if (dont_test_bit(FLAG_IS_OUT, &desc->flags) &&
++ !dont_test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
chip_err(chip,
"%s: tried to flag a GPIO set as output for IRQ\n",
__func__);
diff --git a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
index 91bb4fae11..a5f13afe02 100644
--- a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ b/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
@@ -21,7 +21,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
#include "b53_regs.h"
#include "b53_priv.h"
-@@ -1579,6 +1580,28 @@ static int b53_switch_init(struct b53_de
+@@ -1587,6 +1588,28 @@ static int b53_switch_init(struct b53_de
return ret;
}
diff --git a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch b/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
index 4dadb517a3..e788118259 100644
--- a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
+++ b/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
@@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1151,6 +1151,64 @@ mt7530_port_vlan_del(struct dsa_switch *
+@@ -1153,6 +1153,64 @@ mt7530_port_vlan_del(struct dsa_switch *
return 0;
}
@@ -93,7 +93,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
.phylink_mac_config = mt7530_phylink_mac_config,
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
-@@ -36,6 +36,9 @@ enum {
+@@ -37,6 +37,9 @@ enum {
#define CPU_EN BIT(7)
#define CPU_PORT(x) ((x) << 4)
#define CPU_MASK (0xf << 4)
@@ -103,7 +103,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
/* Registers for address table access */
#define MT7530_ATA1 0x74
-@@ -141,6 +144,8 @@ enum mt7530_stp_state {
+@@ -142,6 +145,8 @@ enum mt7530_stp_state {
/* Register for port control */
#define MT7530_PCR_P(x) (0x2004 + ((x) * 0x100))
@@ -112,7 +112,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
#define PORT_VLAN(x) ((x) & 0x3)
enum mt7530_port_mode {
-@@ -457,6 +462,8 @@ struct mt7530_priv {
+@@ -464,6 +469,8 @@ struct mt7530_priv {
phy_interface_t p6_interface;
phy_interface_t p5_interface;
unsigned int p5_intf_sel;
diff --git a/target/linux/generic/backport-5.4/751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch b/target/linux/generic/backport-5.4/751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch
deleted file mode 100644
index 7b68fac8be..0000000000
--- a/target/linux/generic/backport-5.4/751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Wed, 13 May 2020 23:37:17 +0800
-Subject: net: dsa: mt7530: set CPU port to fallback mode
-
-Currently, setting a bridge's self PVID to other value and deleting
-the default VID 1 renders untagged ports of that VLAN unable to talk to
-the CPU port:
-
- bridge vlan add dev br0 vid 2 pvid untagged self
- bridge vlan del dev br0 vid 1 self
- bridge vlan add dev sw0p0 vid 2 pvid untagged
- bridge vlan del dev sw0p0 vid 1
- # br0 cannot send untagged frames out of sw0p0 anymore
-
-That is because the CPU port is set to security mode and its PVID is
-still 1, and untagged frames are dropped due to VLAN member violation.
-
-Set the CPU port to fallback mode so untagged frames can pass through.
-
-Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 11 ++++++++---
- drivers/net/dsa/mt7530.h | 6 ++++++
- 2 files changed, 14 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -821,10 +821,15 @@ mt7530_port_set_vlan_aware(struct dsa_sw
- PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
-
- /* Trapped into security mode allows packet forwarding through VLAN
-- * table lookup.
-+ * table lookup. CPU port is set to fallback mode to let untagged
-+ * frames pass through.
- */
-- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-- MT7530_PORT_SECURITY_MODE);
-+ if (dsa_is_cpu_port(ds, port))
-+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-+ MT7530_PORT_FALLBACK_MODE);
-+ else
-+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-+ MT7530_PORT_SECURITY_MODE);
-
- /* Set the port as a user port which is to be able to recognize VID
- * from incoming packets before fetching entry within the VLAN table.
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -152,6 +152,12 @@ enum mt7530_port_mode {
- /* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
- MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
-
-+ /* Fallback Mode: Forward received frames with ingress ports that do
-+ * not belong to the VLAN member. Frames whose VID is not listed on
-+ * the VLAN table are forwarded by the PCR_MATRIX members.
-+ */
-+ MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
-+
- /* Security Mode: Discard any frame due to ingress membership
- * violation or VID missed on the VLAN table.
- */
diff --git a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch b/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
index 8d64d2e672..c9c2a6392e 100644
--- a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
+++ b/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
@@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1096,12 +1096,6 @@ mt7530_port_vlan_add(struct dsa_switch *
+@@ -1093,12 +1093,6 @@ mt7530_port_vlan_add(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid;
@@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
-@@ -1127,12 +1121,6 @@ mt7530_port_vlan_del(struct dsa_switch *
+@@ -1124,12 +1118,6 @@ mt7530_port_vlan_del(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid, pvid;
@@ -41,7 +41,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
pvid = priv->ports[port].pvid;
-@@ -1245,6 +1233,7 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -1242,6 +1230,7 @@ mt7530_setup(struct dsa_switch *ds)
* as two netdev instances.
*/
dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
diff --git a/target/linux/generic/backport-5.4/754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch b/target/linux/generic/backport-5.4/754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch
deleted file mode 100644
index 1dcc9e44f7..0000000000
--- a/target/linux/generic/backport-5.4/754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 5e5502e012b8129e11be616acb0f9c34bc8f8adb Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Wed, 13 May 2020 23:10:16 +0800
-Subject: net: dsa: mt7530: fix roaming from DSA user ports
-
-When a client moves from a DSA user port to a software port in a bridge,
-it cannot reach any other clients that connected to the DSA user ports.
-That is because SA learning on the CPU port is disabled, so the switch
-ignores the client's frames from the CPU port and still thinks it is at
-the user port.
-
-Fix it by enabling SA learning on the CPU port.
-
-To prevent the switch from learning from flooding frames from the CPU
-port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
-and let the switch flood them instead of trapping to the CPU port.
-Multicast frames still need to be trapped to the CPU port for snooping,
-so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
-to disable SA learning.
-
-Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 9 ++-------
- drivers/net/dsa/mt7530.h | 1 +
- net/dsa/tag_mtk.c | 15 +++++++++++++++
- 3 files changed, 18 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -639,11 +639,8 @@ mt7530_cpu_port_enable(struct mt7530_pri
- mt7530_write(priv, MT7530_PVC_P(port),
- PORT_SPEC_TAG);
-
-- /* Disable auto learning on the cpu port */
-- mt7530_set(priv, MT7530_PSC_P(port), SA_DIS);
--
-- /* Unknown unicast frame fordwarding to the cpu port */
-- mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
-+ /* Unknown multicast frame forwarding to the cpu port */
-+ mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));
-
- /* Set CPU port number */
- if (priv->id == ID_MT7621)
-@@ -1298,8 +1295,6 @@ mt7530_setup(struct dsa_switch *ds)
- /* Enable and reset MIB counters */
- mt7530_mib_reset(ds);
-
-- mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
--
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
- /* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -31,6 +31,7 @@ enum {
- #define MT7530_MFC 0x10
- #define BC_FFP(x) (((x) & 0xff) << 24)
- #define UNM_FFP(x) (((x) & 0xff) << 16)
-+#define UNM_FFP_MASK UNM_FFP(~0)
- #define UNU_FFP(x) (((x) & 0xff) << 8)
- #define UNU_FFP_MASK UNU_FFP(~0)
- #define CPU_EN BIT(7)
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -15,6 +15,7 @@
- #define MTK_HDR_XMIT_TAGGED_TPID_8100 1
- #define MTK_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0)
- #define MTK_HDR_XMIT_DP_BIT_MASK GENMASK(5, 0)
-+#define MTK_HDR_XMIT_SA_DIS BIT(6)
-
- static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
- struct net_device *dev)
-@@ -22,6 +23,9 @@ static struct sk_buff *mtk_tag_xmit(stru
- struct dsa_port *dp = dsa_slave_to_port(dev);
- u8 *mtk_tag;
- bool is_vlan_skb = true;
-+ unsigned char *dest = eth_hdr(skb)->h_dest;
-+ bool is_multicast_skb = is_multicast_ether_addr(dest) &&
-+ !is_broadcast_ether_addr(dest);
-
- /* Build the special tag after the MAC Source Address. If VLAN header
- * is present, it's required that VLAN header and special tag is
-@@ -47,6 +51,10 @@ static struct sk_buff *mtk_tag_xmit(stru
- MTK_HDR_XMIT_UNTAGGED;
- mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
-
-+ /* Disable SA learning for multicast frames */
-+ if (unlikely(is_multicast_skb))
-+ mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS;
-+
- /* Tag control information is kept for 802.1Q */
- if (!is_vlan_skb) {
- mtk_tag[2] = 0;
-@@ -61,6 +69,9 @@ static struct sk_buff *mtk_tag_rcv(struc
- {
- int port;
- __be16 *phdr, hdr;
-+ unsigned char *dest = eth_hdr(skb)->h_dest;
-+ bool is_multicast_skb = is_multicast_ether_addr(dest) &&
-+ !is_broadcast_ether_addr(dest);
-
- if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
- return NULL;
-@@ -86,6 +97,10 @@ static struct sk_buff *mtk_tag_rcv(struc
- if (!skb->dev)
- return NULL;
-
-+ /* Only unicast or broadcast frames are offloaded */
-+ if (likely(!is_multicast_skb))
-+ skb->offload_fwd_mark = 1;
-+
- return skb;
- }
-
diff --git a/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
index c30dbc94ef..4b0534eff7 100644
--- a/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
+++ b/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
@@ -42,7 +42,7 @@ Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
;----------------------------------------------------------------
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
-@@ -491,6 +491,8 @@ static inline bool uboot_arg_invalid(uns
+@@ -492,6 +492,8 @@ static inline bool uboot_arg_invalid(uns
/* We always pass 0 as magic from U-boot */
#define UBOOT_MAGIC_VALUE 0
@@ -51,7 +51,7 @@ Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
void __init handle_uboot_args(void)
{
bool use_embedded_dtb = true;
-@@ -529,7 +531,7 @@ void __init handle_uboot_args(void)
+@@ -530,7 +532,7 @@ void __init handle_uboot_args(void)
ignore_uboot_args:
if (use_embedded_dtb) {
diff --git a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
index f199f497e4..aae3d35f46 100644
--- a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
@@ -32,7 +32,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
__u16 tc_index; /* traffic control index */
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -5461,6 +5461,9 @@ static enum gro_result dev_gro_receive(s
+@@ -5471,6 +5471,9 @@ static enum gro_result dev_gro_receive(s
int same_flow;
int grow;
@@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (netif_elide_gro(skb->dev))
goto normal;
-@@ -7254,6 +7257,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -7264,6 +7267,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info,
-@@ -7304,6 +7349,7 @@ static int __netdev_upper_dev_link(struc
+@@ -7314,6 +7359,7 @@ static int __netdev_upper_dev_link(struc
if (ret)
return ret;
@@ -99,7 +99,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
ret = notifier_to_errno(ret);
-@@ -7397,6 +7443,7 @@ void netdev_upper_dev_unlink(struct net_
+@@ -7407,6 +7453,7 @@ void netdev_upper_dev_unlink(struct net_
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
@@ -107,7 +107,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
-@@ -8127,6 +8174,7 @@ int dev_set_mac_address(struct net_devic
+@@ -8137,6 +8184,7 @@ int dev_set_mac_address(struct net_devic
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
diff --git a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch
index e2c8980a43..1d8844fb0d 100644
--- a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch
+++ b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch
@@ -13,8 +13,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 +++++
3 files changed, 15 insertions(+)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-index 1a9a9d9..60563ff 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -313,6 +313,11 @@
@@ -29,8 +27,6 @@ index 1a9a9d9..60563ff 100644
};
&ldb {
-diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-index 54b2bea..8942bec 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -304,6 +304,11 @@
@@ -45,8 +41,6 @@ index 54b2bea..8942bec 100644
};
&ldb {
-diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-index 1b6c133..c40583d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -361,6 +361,11 @@
@@ -61,6 +55,3 @@ index 1b6c133..c40583d 100644
};
&ldb {
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch
index 5f5dc0aed1..5873e92626 100644
--- a/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch
+++ b/target/linux/imx6/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch
@@ -11,8 +11,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-index be1af74..30fe47f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -220,6 +220,14 @@
@@ -54,6 +52,3 @@ index be1af74..30fe47f 100644
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch b/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch
index b0ac409f7e..8d436be631 100644
--- a/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch
+++ b/target/linux/imx6/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch
@@ -13,8 +13,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
-index dc646b7..bb35971 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -258,6 +258,14 @@
@@ -45,6 +43,3 @@ index dc646b7..bb35971 100644
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch
index cb8f17222a..537b6f4d67 100644
--- a/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch
+++ b/target/linux/imx6/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch
@@ -13,8 +13,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
-index e8e36df..69ca70d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -295,6 +295,15 @@
@@ -76,6 +74,3 @@ index e8e36df..69ca70d 100644
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch
index 9befdbe0a0..4d24b40535 100644
--- a/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch
+++ b/target/linux/imx6/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch
@@ -13,8 +13,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
-index 6d21cc6..76d6cf5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -248,6 +248,15 @@
@@ -69,6 +67,3 @@ index 6d21cc6..76d6cf5 100644
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch b/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch
index ca11c5462a..6cbd6fdd03 100644
--- a/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch
+++ b/target/linux/imx6/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch
@@ -16,8 +16,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 32 ++++++++++++--------------------
1 file changed, 12 insertions(+), 20 deletions(-)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-index 30fe47f..b850f8f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -83,19 +83,6 @@
@@ -82,6 +80,3 @@ index 30fe47f..b850f8f 100644
pinctrl_reg_wl: regwlgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
---
-2.7.4
-
diff --git a/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch b/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch
index 8a9158ae00..c4cce19b93 100644
--- a/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch
+++ b/target/linux/imx6/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch
@@ -12,8 +12,6 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-index b850f8f..0857de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -81,7 +81,6 @@
@@ -33,6 +31,3 @@ index b850f8f..0857de5 100644
non-removable;
bus-width = <4>;
status = "okay";
---
-2.7.4
-
diff --git a/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch
index 47d801160a..49cece6fb7 100644
--- a/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch
+++ b/target/linux/layerscape/patches-5.4/701-net-0122-config-enable-SDK-FMan-driver.patch
@@ -10,7 +10,7 @@ Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
-@@ -95,6 +95,7 @@ config GIANFAR
+@@ -97,6 +97,7 @@ config GIANFAR
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
diff --git a/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch b/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch
index e025c145ed..05b1aee807 100644
--- a/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch
+++ b/target/linux/layerscape/patches-5.4/701-net-0123-config-enable-SDK-DPAA-driver.patch
@@ -10,7 +10,7 @@ Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
-@@ -96,7 +96,7 @@ config GIANFAR
+@@ -98,7 +98,7 @@ config GIANFAR
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
diff --git a/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch b/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch
index aae0e670f2..6166a49ce6 100644
--- a/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch
+++ b/target/linux/layerscape/patches-5.4/701-net-0273-net-dsa-ocelot-add-tsn-support-for-felix-switch.patch
@@ -648,7 +648,7 @@ Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
static const u32 vsc9959_gcb_regmap[] = {
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
-@@ -545,6 +545,7 @@ struct dsa_switch_ops {
+@@ -552,6 +552,7 @@ struct dsa_switch_ops {
*/
netdev_tx_t (*port_deferred_xmit)(struct dsa_switch *ds, int port,
struct sk_buff *skb);
diff --git a/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch b/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch
index 40d22f4652..d3fdfb3fb1 100644
--- a/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch
+++ b/target/linux/layerscape/patches-5.4/701-net-0381-net-dsa-Pass-pcs_poll-flag-from-driver-to-PHYLINK.patch
@@ -24,7 +24,7 @@ on touch") which was merged in v5.4-rc3.
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
-@@ -277,6 +277,11 @@ struct dsa_switch {
+@@ -284,6 +284,11 @@ struct dsa_switch {
*/
bool vlan_filtering;
@@ -38,7 +38,7 @@ on touch") which was merged in v5.4-rc3.
struct dsa_port ports[];
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
-@@ -625,6 +625,7 @@ static int dsa_port_phylink_register(str
+@@ -639,6 +639,7 @@ static int dsa_port_phylink_register(str
dp->pl_config.dev = ds->dev;
dp->pl_config.type = PHYLINK_DEV;
diff --git a/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch b/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch
index 7aaf8c7162..bace6fd8f0 100644
--- a/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch
+++ b/target/linux/layerscape/patches-5.4/814-qe-0006-config-qe-add-irq-qeic-support.patch
@@ -58,4 +58,4 @@ Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+ depends on QUICC_ENGINE && FSL_SOC && PPC32
select FSL_PQ_MDIO
select PHYLIB
- ---help---
+ select FIXED_PHY
diff --git a/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch b/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch
index 3237c12c15..2fae90ef9e 100644
--- a/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch
+++ b/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch
@@ -1,6 +1,6 @@
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
-@@ -75,9 +75,9 @@
+@@ -75,9 +75,9 @@ static void eip197_trc_cache_banksel(str
}
static u32 eip197_trc_cache_probe(struct safexcel_crypto_priv *priv,
@@ -12,7 +12,7 @@
int actbank;
/*
-@@ -87,32 +87,37 @@
+@@ -87,32 +87,37 @@ static u32 eip197_trc_cache_probe(struct
addrhi = 1 << (16 + maxbanks);
addrlo = 0;
actbank = min(maxbanks - 1, 0);
@@ -60,7 +60,7 @@
}
return addrhi;
}
-@@ -150,7 +155,7 @@
+@@ -150,7 +155,7 @@ static void eip197_trc_cache_clear(struc
htable_offset + i * sizeof(u32));
}
@@ -69,7 +69,7 @@
{
u32 val, dsize, asize;
int cs_rc_max, cs_ht_wc, cs_trc_rec_wc, cs_trc_lg_rec_wc;
-@@ -183,7 +188,7 @@
+@@ -183,7 +188,7 @@ static void eip197_trc_cache_init(struct
writel(val, priv->base + EIP197_TRC_PARAMS);
/* Probed data RAM size in bytes */
@@ -78,7 +78,7 @@
/*
* Now probe the administration RAM size pretty much the same way
-@@ -196,11 +201,18 @@
+@@ -196,11 +201,18 @@ static void eip197_trc_cache_init(struct
writel(val, priv->base + EIP197_TRC_PARAMS);
/* Probed admin RAM size in admin words */
@@ -98,7 +98,7 @@
/*
* Determine optimal configuration from RAM sizes
* Note that we assume that the physical RAM configuration is sane
-@@ -251,6 +263,7 @@
+@@ -251,6 +263,7 @@ static void eip197_trc_cache_init(struct
dev_info(priv->dev, "TRC init: %dd,%da (%dr,%dh)\n",
dsize, asize, cs_rc_max, cs_ht_wc + cs_ht_wc);
@@ -106,7 +106,7 @@
}
static void eip197_init_firmware(struct safexcel_crypto_priv *priv)
-@@ -298,13 +311,14 @@
+@@ -298,13 +311,14 @@ static void eip197_init_firmware(struct
static int eip197_write_firmware(struct safexcel_crypto_priv *priv,
const struct firmware *fw)
{
@@ -123,7 +123,7 @@
/* Exclude final 2 NOPs from size */
return i - EIP197_FW_TERMINAL_NOPS;
-@@ -471,6 +485,14 @@
+@@ -471,6 +485,14 @@ static int safexcel_hw_setup_cdesc_rings
cd_fetch_cnt = ((1 << priv->hwconfig.hwcfsize) /
cd_size_rnd) - 1;
}
@@ -138,7 +138,7 @@
for (i = 0; i < priv->config.rings; i++) {
/* ring base address */
-@@ -479,12 +501,12 @@
+@@ -479,12 +501,12 @@ static int safexcel_hw_setup_cdesc_rings
writel(upper_32_bits(priv->ring[i].cdr.base_dma),
EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
@@ -154,7 +154,7 @@
EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG);
/* Configure DMA tx control */
-@@ -527,13 +549,13 @@
+@@ -527,13 +549,13 @@ static int safexcel_hw_setup_rdesc_rings
writel(upper_32_bits(priv->ring[i].rdr.base_dma),
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
@@ -170,7 +170,7 @@
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
/* Configure DMA tx control */
-@@ -559,7 +581,7 @@
+@@ -559,7 +581,7 @@ static int safexcel_hw_setup_rdesc_rings
static int safexcel_hw_init(struct safexcel_crypto_priv *priv)
{
u32 val;
@@ -179,7 +179,7 @@
dev_dbg(priv->dev, "HW init: using %d pipe(s) and %d ring(s)\n",
priv->config.pes, priv->config.rings);
-@@ -595,8 +617,8 @@
+@@ -595,8 +617,8 @@ static int safexcel_hw_init(struct safex
writel(EIP197_DxE_THR_CTRL_RESET_PE,
EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
@@ -190,7 +190,7 @@
writel(EIP197_HIA_RA_PE_CTRL_RESET,
EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe));
-@@ -639,9 +661,16 @@
+@@ -639,9 +661,16 @@ static int safexcel_hw_init(struct safex
;
/* DMA transfer size to use */
@@ -209,7 +209,7 @@
val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS);
val |= EIP197_HIA_DSE_CFG_ALWAYS_BUFFERABLE;
/* FIXME: instability issues can occur for EIP97 but disabling
-@@ -655,8 +684,8 @@
+@@ -655,8 +684,8 @@ static int safexcel_hw_init(struct safex
writel(0, EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
/* Configure the procesing engine thresholds */
@@ -220,7 +220,7 @@
EIP197_PE(priv) + EIP197_PE_OUT_DBUF_THRES(pe));
/* Processing Engine configuration */
-@@ -696,7 +725,7 @@
+@@ -696,7 +725,7 @@ static int safexcel_hw_init(struct safex
writel(0,
EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
@@ -229,7 +229,7 @@
EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
}
-@@ -719,7 +748,7 @@
+@@ -719,7 +748,7 @@ static int safexcel_hw_init(struct safex
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
/* Ring size */
@@ -238,7 +238,7 @@
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
}
-@@ -736,19 +765,28 @@
+@@ -736,19 +765,28 @@ static int safexcel_hw_init(struct safex
/* Clear any HIA interrupt */
writel(GENMASK(30, 20), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK);
@@ -274,7 +274,7 @@
}
/* Called with ring's lock taken */
-@@ -836,20 +874,24 @@
+@@ -836,20 +874,24 @@ finalize:
spin_unlock_bh(&priv->ring[ring].lock);
/* let the RDR know we have pending descriptors */
@@ -305,7 +305,7 @@
return 0;
if (rdesc->descriptor_overflow)
-@@ -858,13 +900,14 @@
+@@ -858,13 +900,14 @@ inline int safexcel_rdesc_check_errors(s
if (rdesc->buffer_overflow)
dev_err(priv->dev, "Buffer overflow detected");
@@ -323,7 +323,7 @@
(BIT(7) | BIT(4) | BIT(3) | BIT(0))) {
/*
* Give priority over authentication fails:
-@@ -872,7 +915,7 @@
+@@ -872,7 +915,7 @@ inline int safexcel_rdesc_check_errors(s
* something wrong with the input!
*/
return -EINVAL;
@@ -332,7 +332,7 @@
/* Authentication failed */
return -EBADMSG;
}
-@@ -931,16 +974,18 @@
+@@ -931,16 +974,18 @@ int safexcel_invalidate_cache(struct cry
{
struct safexcel_command_desc *cdesc;
struct safexcel_result_desc *rdesc;
@@ -353,7 +353,7 @@
cdesc->control_data.control0 = CONTEXT_CONTROL_INV_TR;
/* Prepare result descriptor */
-@@ -1003,7 +1048,7 @@
+@@ -1003,7 +1048,7 @@ handle_results:
acknowledge:
if (i)
writel(EIP197_xDR_PROC_xD_PKT(i) |
@@ -362,7 +362,7 @@
EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT);
/* If the number of requests overflowed the counter, try to proceed more
-@@ -1171,6 +1216,44 @@
+@@ -1171,6 +1216,44 @@ static struct safexcel_alg_template *saf
&safexcel_alg_xts_aes,
&safexcel_alg_gcm,
&safexcel_alg_ccm,
@@ -407,7 +407,7 @@
};
static int safexcel_register_algorithms(struct safexcel_crypto_priv *priv)
-@@ -1240,30 +1323,30 @@
+@@ -1240,30 +1323,30 @@ static void safexcel_unregister_algorith
static void safexcel_configure(struct safexcel_crypto_priv *priv)
{
@@ -457,7 +457,7 @@
}
static void safexcel_init_register_offsets(struct safexcel_crypto_priv *priv)
-@@ -1309,7 +1392,7 @@
+@@ -1309,7 +1392,7 @@ static int safexcel_probe_generic(void *
int is_pci_dev)
{
struct device *dev = priv->dev;
@@ -466,7 +466,7 @@
int i, ret, hwctg;
priv->context_pool = dmam_pool_create("safexcel-context", dev,
-@@ -1371,13 +1454,16 @@
+@@ -1371,13 +1454,16 @@ static int safexcel_probe_generic(void *
*/
version = readl(EIP197_GLOBAL(priv) + EIP197_VERSION);
if (((priv->flags & SAFEXCEL_HW_EIP197) &&
@@ -484,7 +484,7 @@
return -ENODEV;
}
-@@ -1385,6 +1471,14 @@
+@@ -1385,6 +1471,14 @@ static int safexcel_probe_generic(void *
hwctg = version >> 28;
peid = version & 255;
@@ -499,7 +499,7 @@
/* Detect EIP96 packet engine and version */
version = readl(EIP197_PE(priv) + EIP197_PE_EIP96_VERSION(0));
if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) {
-@@ -1393,10 +1487,13 @@
+@@ -1393,10 +1487,13 @@ static int safexcel_probe_generic(void *
}
priv->hwconfig.pever = EIP197_VERSION_MASK(version);
@@ -513,7 +513,7 @@
priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) &
EIP197_HWDATAW_MASK;
priv->hwconfig.hwcfsize = ((hiaopt >> EIP197_CFSIZE_OFFSET) &
-@@ -1405,6 +1502,19 @@
+@@ -1405,6 +1502,19 @@ static int safexcel_probe_generic(void *
priv->hwconfig.hwrfsize = ((hiaopt >> EIP197_RFSIZE_OFFSET) &
EIP197_RFSIZE_MASK) +
EIP197_RFSIZE_ADJUST;
@@ -533,7 +533,7 @@
} else {
/* EIP97 */
priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) &
-@@ -1413,6 +1523,23 @@
+@@ -1413,6 +1523,23 @@ static int safexcel_probe_generic(void *
EIP97_CFSIZE_MASK;
priv->hwconfig.hwrfsize = (hiaopt >> EIP97_RFSIZE_OFFSET) &
EIP97_RFSIZE_MASK;
@@ -557,7 +557,7 @@
}
/* Get supported algorithms from EIP96 transform engine */
-@@ -1420,10 +1547,12 @@
+@@ -1420,10 +1547,12 @@ static int safexcel_probe_generic(void *
EIP197_PE_EIP96_OPTIONS(0));
/* Print single info line describing what we just detected */
@@ -574,7 +574,7 @@
priv->hwconfig.algo_flags);
safexcel_configure(priv);
-@@ -1547,7 +1676,6 @@
+@@ -1547,7 +1676,6 @@ static void safexcel_hw_reset_rings(stru
}
}
@@ -582,7 +582,7 @@
/* for Device Tree platform driver */
static int safexcel_probe(struct platform_device *pdev)
-@@ -1625,6 +1753,7 @@
+@@ -1625,6 +1753,7 @@ static int safexcel_remove(struct platfo
safexcel_unregister_algorithms(priv);
safexcel_hw_reset_rings(priv);
@@ -590,7 +590,7 @@
clk_disable_unprepare(priv->clk);
for (i = 0; i < priv->config.rings; i++)
-@@ -1666,9 +1795,7 @@
+@@ -1666,9 +1795,7 @@ static struct platform_driver crypto_sa
.of_match_table = safexcel_of_match_table,
},
};
@@ -600,7 +600,7 @@
/* PCIE devices - i.e. Inside Secure development boards */
static int safexcel_pci_probe(struct pci_dev *pdev,
-@@ -1759,7 +1886,7 @@
+@@ -1759,7 +1886,7 @@ static int safexcel_pci_probe(struct pci
return rc;
}
@@ -609,7 +609,7 @@
{
struct safexcel_crypto_priv *priv = pci_get_drvdata(pdev);
int i;
-@@ -1789,54 +1916,32 @@
+@@ -1789,54 +1916,32 @@ static struct pci_driver safexcel_pci_dr
.probe = safexcel_pci_probe,
.remove = safexcel_pci_remove,
};
@@ -702,7 +702,7 @@
#include <crypto/xts.h>
#include <crypto/skcipher.h>
#include <crypto/internal/aead.h>
-@@ -33,6 +37,8 @@
+@@ -33,6 +37,8 @@ enum safexcel_cipher_alg {
SAFEXCEL_DES,
SAFEXCEL_3DES,
SAFEXCEL_AES,
@@ -711,7 +711,7 @@
};
struct safexcel_cipher_ctx {
-@@ -41,8 +47,12 @@
+@@ -41,8 +47,12 @@ struct safexcel_cipher_ctx {
u32 mode;
enum safexcel_cipher_alg alg;
@@ -726,7 +726,7 @@
__le32 key[16];
u32 nonce;
-@@ -51,10 +61,11 @@
+@@ -51,10 +61,11 @@ struct safexcel_cipher_ctx {
/* All the below is AEAD specific */
u32 hash_alg;
u32 state_sz;
@@ -740,7 +740,7 @@
};
struct safexcel_cipher_req {
-@@ -65,206 +76,298 @@
+@@ -65,206 +76,298 @@ struct safexcel_cipher_req {
int nr_src, nr_dst;
};
@@ -1201,7 +1201,7 @@
}
static int safexcel_skcipher_aes_setkey(struct crypto_skcipher *ctfm,
-@@ -277,14 +380,12 @@
+@@ -277,14 +380,12 @@ static int safexcel_skcipher_aes_setkey(
int ret, i;
ret = aes_expandkey(&aes, key, len);
@@ -1218,7 +1218,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -309,43 +410,57 @@
+@@ -309,43 +410,57 @@ static int safexcel_aead_setkey(struct c
struct safexcel_crypto_priv *priv = ctx->priv;
struct crypto_authenc_keys keys;
struct crypto_aes_ctx aes;
@@ -1286,7 +1286,7 @@
/* Auth key */
switch (ctx->hash_alg) {
-@@ -374,21 +489,24 @@
+@@ -374,21 +489,24 @@ static int safexcel_aead_setkey(struct c
keys.authkeylen, &istate, &ostate))
goto badkey;
break;
@@ -1315,7 +1315,7 @@
ctx->key_len = keys.enckeylen;
memcpy(ctx->ipad, &istate.state, ctx->state_sz);
-@@ -398,8 +516,6 @@
+@@ -398,8 +516,6 @@ static int safexcel_aead_setkey(struct c
return 0;
badkey:
@@ -1324,7 +1324,7 @@
memzero_explicit(&keys, sizeof(keys));
return err;
}
-@@ -423,6 +539,17 @@
+@@ -423,6 +539,17 @@ static int safexcel_context_control(stru
CONTEXT_CONTROL_DIGEST_XCM |
ctx->hash_alg |
CONTEXT_CONTROL_SIZE(ctrl_size);
@@ -1342,7 +1342,7 @@
} else {
ctrl_size += ctx->state_sz / sizeof(u32) * 2;
cdesc->control_data.control0 =
-@@ -431,17 +558,21 @@
+@@ -431,17 +558,21 @@ static int safexcel_context_control(stru
ctx->hash_alg |
CONTEXT_CONTROL_SIZE(ctrl_size);
}
@@ -1372,7 +1372,7 @@
} else {
if (sreq->direction == SAFEXCEL_ENCRYPT)
cdesc->control_data.control0 =
-@@ -480,6 +611,12 @@
+@@ -480,6 +611,12 @@ static int safexcel_context_control(stru
ctx->key_len >> ctx->xts);
return -EINVAL;
}
@@ -1385,7 +1385,7 @@
}
return 0;
-@@ -563,6 +700,7 @@
+@@ -563,6 +700,7 @@ static int safexcel_send_req(struct cryp
unsigned int totlen;
unsigned int totlen_src = cryptlen + assoclen;
unsigned int totlen_dst = totlen_src;
@@ -1393,7 +1393,7 @@
int n_cdesc = 0, n_rdesc = 0;
int queued, i, ret = 0;
bool first = true;
-@@ -637,56 +775,60 @@
+@@ -637,56 +775,60 @@ static int safexcel_send_req(struct cryp
memcpy(ctx->base.ctxr->data, ctx->key, ctx->key_len);
@@ -1475,7 +1475,7 @@
cryptlen);
/* result descriptors */
-@@ -1073,6 +1215,8 @@
+@@ -1073,6 +1215,8 @@ static int safexcel_skcipher_cra_init(st
ctx->base.send = safexcel_skcipher_send;
ctx->base.handle_result = safexcel_skcipher_handle_result;
@@ -1484,7 +1484,7 @@
return 0;
}
-@@ -1137,6 +1281,8 @@
+@@ -1137,6 +1281,8 @@ static int safexcel_skcipher_aes_ecb_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB;
@@ -1493,7 +1493,7 @@
return 0;
}
-@@ -1171,6 +1317,7 @@
+@@ -1171,6 +1317,7 @@ static int safexcel_skcipher_aes_cbc_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
@@ -1501,7 +1501,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC;
return 0;
}
-@@ -1207,6 +1354,7 @@
+@@ -1207,6 +1354,7 @@ static int safexcel_skcipher_aes_cfb_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
@@ -1509,7 +1509,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CFB;
return 0;
}
-@@ -1243,6 +1391,7 @@
+@@ -1243,6 +1391,7 @@ static int safexcel_skcipher_aes_ofb_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
@@ -1517,7 +1517,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_OFB;
return 0;
}
-@@ -1288,14 +1437,12 @@
+@@ -1288,14 +1437,12 @@ static int safexcel_skcipher_aesctr_setk
/* exclude the nonce here */
keylen = len - CTR_RFC3686_NONCE_SIZE;
ret = aes_expandkey(&aes, key, keylen);
@@ -1534,7 +1534,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -1317,6 +1464,7 @@
+@@ -1317,6 +1464,7 @@ static int safexcel_skcipher_aes_ctr_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
@@ -1542,7 +1542,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD;
return 0;
}
-@@ -1352,6 +1500,7 @@
+@@ -1352,6 +1500,7 @@ static int safexcel_des_setkey(struct cr
unsigned int len)
{
struct safexcel_cipher_ctx *ctx = crypto_skcipher_ctx(ctfm);
@@ -1550,7 +1550,7 @@
int ret;
ret = verify_skcipher_des_key(ctfm, key);
-@@ -1359,7 +1508,7 @@
+@@ -1359,7 +1508,7 @@ static int safexcel_des_setkey(struct cr
return ret;
/* if context exits and key changed, need to invalidate it */
@@ -1559,7 +1559,7 @@
if (memcmp(ctx->key, key, len))
ctx->base.needs_inv = true;
-@@ -1375,6 +1524,8 @@
+@@ -1375,6 +1524,8 @@ static int safexcel_skcipher_des_cbc_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_DES;
@@ -1568,7 +1568,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC;
return 0;
}
-@@ -1412,6 +1563,8 @@
+@@ -1412,6 +1563,8 @@ static int safexcel_skcipher_des_ecb_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_DES;
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB;
@@ -1577,7 +1577,7 @@
return 0;
}
-@@ -1444,6 +1597,7 @@
+@@ -1444,6 +1597,7 @@ static int safexcel_des3_ede_setkey(stru
const u8 *key, unsigned int len)
{
struct safexcel_cipher_ctx *ctx = crypto_skcipher_ctx(ctfm);
@@ -1585,7 +1585,7 @@
int err;
err = verify_skcipher_des3_key(ctfm, key);
-@@ -1451,13 +1605,11 @@
+@@ -1451,13 +1605,11 @@ static int safexcel_des3_ede_setkey(stru
return err;
/* if context exits and key changed, need to invalidate it */
@@ -1600,7 +1600,7 @@
ctx->key_len = len;
return 0;
-@@ -1469,6 +1621,8 @@
+@@ -1469,6 +1621,8 @@ static int safexcel_skcipher_des3_cbc_cr
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_3DES;
@@ -1609,7 +1609,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC;
return 0;
}
-@@ -1506,6 +1660,8 @@
+@@ -1506,6 +1660,8 @@ static int safexcel_skcipher_des3_ecb_cr
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_3DES;
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB;
@@ -1618,7 +1618,7 @@
return 0;
}
-@@ -1561,6 +1717,9 @@
+@@ -1561,6 +1717,9 @@ static int safexcel_aead_cra_init(struct
ctx->priv = tmpl->priv;
ctx->alg = SAFEXCEL_AES; /* default */
@@ -1628,7 +1628,7 @@
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; /* default */
ctx->aead = true;
ctx->base.send = safexcel_aead_send;
-@@ -1749,6 +1908,8 @@
+@@ -1749,6 +1908,8 @@ static int safexcel_aead_sha1_des3_cra_i
safexcel_aead_sha1_cra_init(tfm);
ctx->alg = SAFEXCEL_3DES; /* override default */
@@ -1637,7 +1637,7 @@
return 0;
}
-@@ -1777,6 +1938,330 @@
+@@ -1777,6 +1938,330 @@ struct safexcel_alg_template safexcel_al
},
};
@@ -1968,7 +1968,7 @@
static int safexcel_aead_sha1_ctr_cra_init(struct crypto_tfm *tfm)
{
struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-@@ -1965,14 +2450,12 @@
+@@ -1965,14 +2450,12 @@ static int safexcel_skcipher_aesxts_setk
/* Only half of the key data is cipher key */
keylen = (len >> 1);
ret = aes_expandkey(&aes, key, keylen);
@@ -1985,7 +1985,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -1984,15 +2467,13 @@
+@@ -1984,15 +2467,13 @@ static int safexcel_skcipher_aesxts_setk
/* The other half is the tweak key */
ret = aes_expandkey(&aes, (u8 *)(key + keylen), keylen);
@@ -2004,7 +2004,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -2015,6 +2496,7 @@
+@@ -2015,6 +2496,7 @@ static int safexcel_skcipher_aes_xts_cra
safexcel_skcipher_cra_init(tfm);
ctx->alg = SAFEXCEL_AES;
@@ -2012,7 +2012,7 @@
ctx->xts = 1;
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XTS;
return 0;
-@@ -2075,14 +2557,13 @@
+@@ -2075,14 +2557,13 @@ static int safexcel_aead_gcm_setkey(stru
ret = aes_expandkey(&aes, key, len);
if (ret) {
@@ -2028,7 +2028,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -2099,8 +2580,6 @@
+@@ -2099,8 +2580,6 @@ static int safexcel_aead_gcm_setkey(stru
crypto_cipher_set_flags(ctx->hkaes, crypto_aead_get_flags(ctfm) &
CRYPTO_TFM_REQ_MASK);
ret = crypto_cipher_setkey(ctx->hkaes, key, len);
@@ -2037,7 +2037,7 @@
if (ret)
return ret;
-@@ -2109,7 +2588,7 @@
+@@ -2109,7 +2588,7 @@ static int safexcel_aead_gcm_setkey(stru
if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) {
for (i = 0; i < AES_BLOCK_SIZE / sizeof(u32); i++) {
@@ -2046,7 +2046,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -2135,10 +2614,7 @@
+@@ -2135,10 +2614,7 @@ static int safexcel_aead_gcm_cra_init(st
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XCM; /* override default */
ctx->hkaes = crypto_alloc_cipher("aes", 0, 0);
@@ -2058,7 +2058,7 @@
}
static void safexcel_aead_gcm_cra_exit(struct crypto_tfm *tfm)
-@@ -2192,14 +2668,13 @@
+@@ -2192,14 +2668,13 @@ static int safexcel_aead_ccm_setkey(stru
ret = aes_expandkey(&aes, key, len);
if (ret) {
@@ -2074,7 +2074,7 @@
ctx->base.needs_inv = true;
break;
}
-@@ -2235,6 +2710,7 @@
+@@ -2235,6 +2710,7 @@ static int safexcel_aead_ccm_cra_init(st
ctx->state_sz = 3 * AES_BLOCK_SIZE;
ctx->xcm = EIP197_XCM_MODE_CCM;
ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XCM; /* override default */
@@ -2082,7 +2082,7 @@
return 0;
}
-@@ -2301,5 +2777,949 @@
+@@ -2301,5 +2777,949 @@ struct safexcel_alg_template safexcel_al
.cra_exit = safexcel_aead_cra_exit,
.cra_module = THIS_MODULE,
},
@@ -3183,7 +3183,7 @@
__le32 data[40];
} __packed;
-@@ -358,10 +388,14 @@
+@@ -358,10 +388,14 @@ struct safexcel_context_record {
#define CONTEXT_CONTROL_CRYPTO_ALG_AES128 (0x5 << 17)
#define CONTEXT_CONTROL_CRYPTO_ALG_AES192 (0x6 << 17)
#define CONTEXT_CONTROL_CRYPTO_ALG_AES256 (0x7 << 17)
@@ -3198,7 +3198,7 @@
#define CONTEXT_CONTROL_CRYPTO_ALG_SHA1 (0x2 << 23)
#define CONTEXT_CONTROL_CRYPTO_ALG_SHA224 (0x4 << 23)
#define CONTEXT_CONTROL_CRYPTO_ALG_SHA256 (0x3 << 23)
-@@ -371,17 +405,25 @@
+@@ -371,17 +405,25 @@ struct safexcel_context_record {
#define CONTEXT_CONTROL_CRYPTO_ALG_XCBC128 (0x1 << 23)
#define CONTEXT_CONTROL_CRYPTO_ALG_XCBC192 (0x2 << 23)
#define CONTEXT_CONTROL_CRYPTO_ALG_XCBC256 (0x3 << 23)
@@ -3224,7 +3224,7 @@
#define CONTEXT_CONTROL_IV0 BIT(5)
#define CONTEXT_CONTROL_IV1 BIT(6)
#define CONTEXT_CONTROL_IV2 BIT(7)
-@@ -394,6 +436,13 @@
+@@ -394,6 +436,13 @@ struct safexcel_context_record {
#define EIP197_XCM_MODE_GCM 1
#define EIP197_XCM_MODE_CCM 2
@@ -3238,7 +3238,7 @@
/* The hash counter given to the engine in the context has a granularity of
* 64 bits.
*/
-@@ -423,6 +472,8 @@
+@@ -423,6 +472,8 @@ struct safexcel_context_record {
#define EIP197_TRC_PARAMS2_RC_SZ_SMALL(n) ((n) << 18)
/* Cache helpers */
@@ -3247,7 +3247,7 @@
#define EIP197_CS_TRC_REC_WC 64
#define EIP197_CS_RC_SIZE (4 * sizeof(u32))
#define EIP197_CS_RC_NEXT(x) (x)
-@@ -447,7 +498,7 @@
+@@ -447,7 +498,7 @@ struct result_data_desc {
u16 application_id;
u16 rsvd1;
@@ -3256,7 +3256,7 @@
} __packed;
-@@ -465,16 +516,15 @@
+@@ -465,16 +516,15 @@ struct safexcel_result_desc {
u32 data_lo;
u32 data_hi;
@@ -3276,7 +3276,7 @@
sizeof(u32))
struct safexcel_token {
-@@ -505,6 +555,8 @@
+@@ -505,6 +555,8 @@ static inline void eip197_noop_token(str
{
token->opcode = EIP197_TOKEN_OPCODE_NOOP;
token->packet_length = BIT(2);
@@ -3285,7 +3285,7 @@
}
/* Instructions */
-@@ -526,14 +578,13 @@
+@@ -526,14 +578,13 @@ struct safexcel_control_data_desc {
u16 application_id;
u16 rsvd;
@@ -3302,7 +3302,7 @@
} __packed;
#define EIP197_OPTION_MAGIC_VALUE BIT(0)
-@@ -543,7 +594,10 @@
+@@ -543,7 +594,10 @@ struct safexcel_control_data_desc {
#define EIP197_OPTION_2_TOKEN_IV_CMD GENMASK(11, 10)
#define EIP197_OPTION_4_TOKEN_IV_CMD GENMASK(11, 9)
@@ -3313,7 +3313,7 @@
/* Basic Command Descriptor format */
struct safexcel_command_desc {
-@@ -551,16 +605,22 @@
+@@ -551,16 +605,22 @@ struct safexcel_command_desc {
u8 rsvd0:5;
u8 last_seg:1;
u8 first_seg:1;
@@ -3337,7 +3337,7 @@
/*
* Internal structures & functions
*/
-@@ -578,15 +638,20 @@
+@@ -578,15 +638,20 @@ enum eip197_fw {
struct safexcel_desc_ring {
void *base;
@@ -3359,7 +3359,7 @@
};
enum safexcel_alg_type {
-@@ -601,9 +666,11 @@
+@@ -601,9 +666,11 @@ struct safexcel_config {
u32 cd_size;
u32 cd_offset;
@@ -3371,7 +3371,7 @@
};
struct safexcel_work_data {
-@@ -654,6 +721,12 @@
+@@ -654,6 +721,12 @@ enum safexcel_eip_version {
/* Priority we use for advertising our algorithms */
#define SAFEXCEL_CRA_PRIORITY 300
@@ -3384,7 +3384,7 @@
/* EIP algorithm presence flags */
enum safexcel_eip_algorithms {
SAFEXCEL_ALG_BC0 = BIT(5),
-@@ -697,16 +770,23 @@
+@@ -697,16 +770,23 @@ struct safexcel_register_offsets {
enum safexcel_flags {
EIP197_TRC_CACHE = BIT(0),
SAFEXCEL_HW_EIP197 = BIT(1),
@@ -3408,7 +3408,7 @@
};
struct safexcel_crypto_priv {
-@@ -778,7 +858,7 @@
+@@ -778,7 +858,7 @@ struct safexcel_inv_result {
void safexcel_dequeue(struct safexcel_crypto_priv *priv, int ring);
int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv,
@@ -3417,7 +3417,7 @@
void safexcel_complete(struct safexcel_crypto_priv *priv, int ring);
int safexcel_invalidate_cache(struct crypto_async_request *async,
struct safexcel_crypto_priv *priv,
-@@ -797,7 +877,8 @@
+@@ -797,7 +877,8 @@ struct safexcel_command_desc *safexcel_a
bool first, bool last,
dma_addr_t data, u32 len,
u32 full_data_len,
@@ -3427,7 +3427,7 @@
struct safexcel_result_desc *safexcel_add_rdesc(struct safexcel_crypto_priv *priv,
int ring_id,
bool first, bool last,
-@@ -853,5 +934,43 @@
+@@ -853,5 +934,43 @@ extern struct safexcel_alg_template safe
extern struct safexcel_alg_template safexcel_alg_xts_aes;
extern struct safexcel_alg_template safexcel_alg_gcm;
extern struct safexcel_alg_template safexcel_alg_ccm;
@@ -3487,7 +3487,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
-@@ -19,9 +23,19 @@
+@@ -19,9 +23,19 @@ struct safexcel_ahash_ctx {
struct safexcel_crypto_priv *priv;
u32 alg;
@@ -3510,7 +3510,7 @@
};
struct safexcel_ahash_req {
-@@ -31,6 +45,8 @@
+@@ -31,6 +45,8 @@ struct safexcel_ahash_req {
bool needs_inv;
bool hmac_zlen;
bool len_is_le;
@@ -3519,7 +3519,7 @@
int nents;
dma_addr_t result_dma;
-@@ -39,7 +55,9 @@
+@@ -39,7 +55,9 @@ struct safexcel_ahash_req {
u8 state_sz; /* expected state size, only set once */
u8 block_sz; /* block size, only set once */
@@ -3530,7 +3530,7 @@
u64 len;
u64 processed;
-@@ -57,22 +75,36 @@
+@@ -57,22 +75,36 @@ static inline u64 safexcel_queued_len(st
}
static void safexcel_hash_token(struct safexcel_command_desc *cdesc,
@@ -3573,7 +3573,7 @@
}
static void safexcel_context_control(struct safexcel_ahash_ctx *ctx,
-@@ -82,29 +114,49 @@
+@@ -82,29 +114,49 @@ static void safexcel_context_control(str
struct safexcel_crypto_priv *priv = ctx->priv;
u64 count = 0;
@@ -3630,7 +3630,7 @@
return;
}
-@@ -204,7 +256,7 @@
+@@ -204,7 +256,7 @@ static int safexcel_handle_req_result(st
}
if (sreq->result_dma) {
@@ -3639,7 +3639,7 @@
DMA_FROM_DEVICE);
sreq->result_dma = 0;
}
-@@ -223,14 +275,15 @@
+@@ -223,14 +275,15 @@ static int safexcel_handle_req_result(st
memcpy(sreq->cache, sreq->state,
crypto_ahash_digestsize(ahash));
@@ -3657,7 +3657,7 @@
areq->nbytes = 0;
safexcel_ahash_enqueue(areq);
-@@ -238,8 +291,14 @@
+@@ -238,8 +291,14 @@ static int safexcel_handle_req_result(st
return 1;
}
@@ -3674,7 +3674,7 @@
}
cache_len = safexcel_queued_len(sreq);
-@@ -261,10 +320,11 @@
+@@ -261,10 +320,11 @@ static int safexcel_ahash_send_req(struc
struct safexcel_command_desc *cdesc, *first_cdesc = NULL;
struct safexcel_result_desc *rdesc;
struct scatterlist *sg;
@@ -3689,7 +3689,7 @@
if (queued <= HASH_CACHE_SIZE)
cache_len = queued;
else
-@@ -287,15 +347,52 @@
+@@ -287,15 +347,52 @@ static int safexcel_ahash_send_req(struc
areq->nbytes - extra);
queued -= extra;
@@ -3743,7 +3743,7 @@
/* Add a command descriptor for the cached data, if any */
if (cache_len) {
req->cache_dma = dma_map_single(priv->dev, req->cache,
-@@ -306,8 +403,9 @@
+@@ -306,8 +403,9 @@ static int safexcel_ahash_send_req(struc
req->cache_sz = cache_len;
first_cdesc = safexcel_add_cdesc(priv, ring, 1,
(cache_len == len),
@@ -3755,7 +3755,7 @@
if (IS_ERR(first_cdesc)) {
ret = PTR_ERR(first_cdesc);
goto unmap_cache;
-@@ -319,10 +417,6 @@
+@@ -319,10 +417,6 @@ static int safexcel_ahash_send_req(struc
goto send_command;
}
@@ -3766,7 +3766,7 @@
/* Now handle the current ahash request buffer(s) */
req->nents = dma_map_sg(priv->dev, areq->src,
sg_nents_for_len(areq->src,
-@@ -336,26 +430,34 @@
+@@ -336,26 +430,34 @@ static int safexcel_ahash_send_req(struc
for_each_sg(areq->src, sg, req->nents, i) {
int sglen = sg_dma_len(sg);
@@ -3806,7 +3806,7 @@
}
send_command:
-@@ -363,9 +465,9 @@
+@@ -363,9 +465,9 @@ send_command:
safexcel_context_control(ctx, req, first_cdesc);
/* Add the token */
@@ -3818,7 +3818,7 @@
DMA_FROM_DEVICE);
if (dma_mapping_error(priv->dev, req->result_dma)) {
ret = -EINVAL;
-@@ -374,7 +476,7 @@
+@@ -374,7 +476,7 @@ send_command:
/* Add a result descriptor */
rdesc = safexcel_add_rdesc(priv, ring, 1, 1, req->result_dma,
@@ -3827,7 +3827,7 @@
if (IS_ERR(rdesc)) {
ret = PTR_ERR(rdesc);
goto unmap_result;
-@@ -382,17 +484,20 @@
+@@ -382,17 +484,20 @@ send_command:
safexcel_rdr_req_set(priv, ring, rdesc, &areq->base);
@@ -3851,7 +3851,7 @@
cdesc_rollback:
for (i = 0; i < n_cdesc; i++)
safexcel_ring_rollback_wptr(priv, &priv->ring[ring].cdr);
-@@ -590,16 +695,12 @@
+@@ -590,16 +695,12 @@ static int safexcel_ahash_enqueue(struct
if (ctx->base.ctxr) {
if (priv->flags & EIP197_TRC_CACHE && !ctx->base.needs_inv &&
@@ -3871,7 +3871,7 @@
memcmp(ctx->base.ctxr->data + (req->state_sz>>2),
ctx->opad, req->state_sz))))
/*
-@@ -622,6 +723,7 @@
+@@ -622,6 +723,7 @@ static int safexcel_ahash_enqueue(struct
if (!ctx->base.ctxr)
return -ENOMEM;
}
@@ -3879,7 +3879,7 @@
ring = ctx->base.ring;
-@@ -691,8 +793,34 @@
+@@ -691,8 +793,34 @@ static int safexcel_ahash_final(struct a
else if (ctx->alg == CONTEXT_CONTROL_CRYPTO_ALG_SHA512)
memcpy(areq->result, sha512_zero_message_hash,
SHA512_DIGEST_SIZE);
@@ -3914,7 +3914,7 @@
} else if (unlikely(req->hmac &&
(req->len == req->block_sz) &&
!areq->nbytes)) {
-@@ -792,6 +920,7 @@
+@@ -792,6 +920,7 @@ static int safexcel_ahash_cra_init(struc
ctx->priv = tmpl->priv;
ctx->base.send = safexcel_ahash_send;
ctx->base.handle_result = safexcel_handle_result;
@@ -3922,7 +3922,7 @@
crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
sizeof(struct safexcel_ahash_req));
-@@ -808,6 +937,7 @@
+@@ -808,6 +937,7 @@ static int safexcel_sha1_init(struct aha
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA1;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA1_DIGEST_SIZE;
@@ -3930,7 +3930,7 @@
req->block_sz = SHA1_BLOCK_SIZE;
return 0;
-@@ -889,6 +1019,7 @@
+@@ -889,6 +1019,7 @@ static int safexcel_hmac_sha1_init(struc
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA1;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA1_DIGEST_SIZE;
@@ -3938,7 +3938,7 @@
req->block_sz = SHA1_BLOCK_SIZE;
req->hmac = true;
-@@ -1125,6 +1256,7 @@
+@@ -1125,6 +1256,7 @@ static int safexcel_sha256_init(struct a
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA256;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA256_DIGEST_SIZE;
@@ -3946,7 +3946,7 @@
req->block_sz = SHA256_BLOCK_SIZE;
return 0;
-@@ -1180,6 +1312,7 @@
+@@ -1180,6 +1312,7 @@ static int safexcel_sha224_init(struct a
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA224;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA256_DIGEST_SIZE;
@@ -3954,7 +3954,7 @@
req->block_sz = SHA256_BLOCK_SIZE;
return 0;
-@@ -1248,6 +1381,7 @@
+@@ -1248,6 +1381,7 @@ static int safexcel_hmac_sha224_init(str
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA224;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA256_DIGEST_SIZE;
@@ -3962,7 +3962,7 @@
req->block_sz = SHA256_BLOCK_SIZE;
req->hmac = true;
-@@ -1318,6 +1452,7 @@
+@@ -1318,6 +1452,7 @@ static int safexcel_hmac_sha256_init(str
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA256;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA256_DIGEST_SIZE;
@@ -3970,7 +3970,7 @@
req->block_sz = SHA256_BLOCK_SIZE;
req->hmac = true;
-@@ -1375,6 +1510,7 @@
+@@ -1375,6 +1510,7 @@ static int safexcel_sha512_init(struct a
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA512;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA512_DIGEST_SIZE;
@@ -3978,7 +3978,7 @@
req->block_sz = SHA512_BLOCK_SIZE;
return 0;
-@@ -1430,6 +1566,7 @@
+@@ -1430,6 +1566,7 @@ static int safexcel_sha384_init(struct a
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA384;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA512_DIGEST_SIZE;
@@ -3986,7 +3986,7 @@
req->block_sz = SHA512_BLOCK_SIZE;
return 0;
-@@ -1498,6 +1635,7 @@
+@@ -1498,6 +1635,7 @@ static int safexcel_hmac_sha512_init(str
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA512;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA512_DIGEST_SIZE;
@@ -3994,7 +3994,7 @@
req->block_sz = SHA512_BLOCK_SIZE;
req->hmac = true;
-@@ -1568,6 +1706,7 @@
+@@ -1568,6 +1706,7 @@ static int safexcel_hmac_sha384_init(str
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA384;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = SHA512_DIGEST_SIZE;
@@ -4002,7 +4002,7 @@
req->block_sz = SHA512_BLOCK_SIZE;
req->hmac = true;
-@@ -1625,6 +1764,7 @@
+@@ -1625,6 +1764,7 @@ static int safexcel_md5_init(struct ahas
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_MD5;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = MD5_DIGEST_SIZE;
@@ -4010,7 +4010,7 @@
req->block_sz = MD5_HMAC_BLOCK_SIZE;
return 0;
-@@ -1686,6 +1826,7 @@
+@@ -1686,6 +1826,7 @@ static int safexcel_hmac_md5_init(struct
ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_MD5;
req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED;
req->state_sz = MD5_DIGEST_SIZE;
@@ -4018,7 +4018,7 @@
req->block_sz = MD5_HMAC_BLOCK_SIZE;
req->len_is_le = true; /* MD5 is little endian! ... */
req->hmac = true;
-@@ -1738,5 +1879,1235 @@
+@@ -1738,5 +1879,1235 @@ struct safexcel_alg_template safexcel_al
.cra_module = THIS_MODULE,
},
},
@@ -5256,7 +5256,7 @@
};
--- a/drivers/crypto/inside-secure/safexcel_ring.c
+++ b/drivers/crypto/inside-secure/safexcel_ring.c
-@@ -14,7 +14,12 @@
+@@ -14,7 +14,12 @@ int safexcel_init_ring_descriptors(struc
struct safexcel_desc_ring *cdr,
struct safexcel_desc_ring *rdr)
{
@@ -5270,7 +5270,7 @@
cdr->base = dmam_alloc_coherent(priv->dev,
cdr->offset * EIP197_DEFAULT_RING_SIZE,
&cdr->base_dma, GFP_KERNEL);
-@@ -24,7 +29,34 @@
+@@ -24,7 +29,34 @@ int safexcel_init_ring_descriptors(struc
cdr->base_end = cdr->base + cdr->offset * (EIP197_DEFAULT_RING_SIZE - 1);
cdr->read = cdr->base;
@@ -5306,7 +5306,7 @@
rdr->base = dmam_alloc_coherent(priv->dev,
rdr->offset * EIP197_DEFAULT_RING_SIZE,
&rdr->base_dma, GFP_KERNEL);
-@@ -42,11 +74,40 @@
+@@ -42,11 +74,40 @@ inline int safexcel_select_ring(struct s
return (atomic_inc_return(&priv->ring_used) % priv->config.rings);
}
@@ -5349,7 +5349,7 @@
if ((ring->write == ring->read - ring->offset) ||
(ring->read == ring->base && ring->write == ring->base_end))
return ERR_PTR(-ENOMEM);
-@@ -106,10 +167,13 @@
+@@ -106,10 +167,13 @@ void safexcel_ring_rollback_wptr(struct
if (ring->write == ring->read)
return;
@@ -5365,7 +5365,7 @@
}
struct safexcel_command_desc *safexcel_add_cdesc(struct safexcel_crypto_priv *priv,
-@@ -117,26 +181,26 @@
+@@ -117,26 +181,26 @@ struct safexcel_command_desc *safexcel_a
bool first, bool last,
dma_addr_t data, u32 data_len,
u32 full_data_len,
@@ -5403,7 +5403,7 @@
/*
* Note that the length here MUST be >0 or else the EIP(1)97
* may hang. Newer EIP197 firmware actually incorporates this
-@@ -146,20 +210,12 @@
+@@ -146,20 +210,12 @@ struct safexcel_command_desc *safexcel_a
cdesc->control_data.packet_length = full_data_len ?: 1;
cdesc->control_data.options = EIP197_OPTION_MAGIC_VALUE |
EIP197_OPTION_64BIT_CTX |
@@ -5429,7 +5429,7 @@
}
return cdesc;
-@@ -171,18 +227,27 @@
+@@ -171,18 +227,27 @@ struct safexcel_result_desc *safexcel_ad
dma_addr_t data, u32 len)
{
struct safexcel_result_desc *rdesc;
diff --git a/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch b/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch
index 197cbf457d..98cb0b16ff 100644
--- a/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch
+++ b/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch
@@ -1,6 +1,6 @@
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
-@@ -595,6 +595,14 @@
+@@ -595,6 +595,14 @@ static int safexcel_hw_init(struct safex
val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
}
diff --git a/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch b/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
index 5c56765ecc..5288751e50 100644
--- a/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
+++ b/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
@@ -78,23 +78,21 @@ Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
-diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
-index c7667645f04a..467f80157acf 100644
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
- the xrx200 / VR9 SoC.
-
- config NET_DSA_MT7530
-- tristate "Mediatek MT7530 Ethernet switch support"
-+ tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
- depends on NET_DSA
- select NET_DSA_TAG_MTK
- ---help---
-- This enables support for the Mediatek MT7530 Ethernet switch
-- chip.
-+ This enables support for the MediaTek MT7530 and MT7621 Ethernet
-+ switch chip.
-
- config NET_DSA_MV88E6060
- tristate "Marvell 88E6060 ethernet switch chip support"
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
+ the xrx200 / VR9 SoC.
+
+ config NET_DSA_MT7530
+- tristate "Mediatek MT7530 Ethernet switch support"
++ tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_MTK
+ ---help---
+- This enables support for the Mediatek MT7530 Ethernet switch
+- chip.
++ This enables support for the MediaTek MT7530 and MT7621 Ethernet
++ switch chip.
+
+ config NET_DSA_MV88E6060
+ tristate "Marvell 88E6060 ethernet switch chip support"
diff --git a/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch b/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
index 637f9e3c58..c4b117dcb7 100644
--- a/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
+++ b/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
@@ -84,10 +84,8 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
drivers/net/dsa/mt7530.h | 29 ++++-
2 files changed, 203 insertions(+), 57 deletions(-)
-Index: linux-5.4.43/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-5.4.43.orig/drivers/net/dsa/mt7530.c
-+++ linux-5.4.43/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -373,7 +373,7 @@ mt7530_fdb_write(struct mt7530_priv *pri
}
@@ -389,10 +387,8 @@ Index: linux-5.4.43/drivers/net/dsa/mt7530.c
if (priv->id == ID_MT7530) {
priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-Index: linux-5.4.43/drivers/net/dsa/mt7530.h
-===================================================================
---- linux-5.4.43.orig/drivers/net/dsa/mt7530.h
-+++ linux-5.4.43/drivers/net/dsa/mt7530.h
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
@@ -11,7 +11,7 @@
#define MT7530_NUM_FDB_RECORDS 2048
#define MT7530_ALL_MEMBERS 0xff
diff --git a/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch b/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
index 3ca12b9172..b28f23f573 100644
--- a/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
+++ b/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
@@ -79,103 +79,101 @@ Signed-off-by: Landen Chao <landen.chao@mediatek.com>
.../devicetree/bindings/net/dsa/mt7530.txt | 77 ++++++++++++++++++-
1 file changed, 74 insertions(+), 3 deletions(-)
-diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-index c5ed5d25f642..dc226a4e402a 100644
---- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-@@ -5,6 +5,7 @@ Required properties:
-
- - compatible: may be compatible = "mediatek,mt7530"
- or compatible = "mediatek,mt7621"
-+ or compatible = "mediatek,mt7531"
- - #address-cells: Must be 1.
- - #size-cells: Must be 0.
- - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
-@@ -32,10 +33,13 @@ Required properties for the child nodes within ports container:
-
- - reg: Port address described must be 6 for CPU port and from 0 to 5 for
- user ports.
--- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-- "cpu".
-+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
-+ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
-+ must be either "trgmii" or "rgmii"
-+ If compatible mediatek,mt7531 is set,
-+ must be either "sgmii", "1000base-x" or "2500base-x"
-
--Port 5 of the switch is muxed between:
-+Port 5 of mt7530 and mt7621 switch is muxed between:
- 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
- 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
- of the SOC. Used in many setups where port 0/4 becomes the WAN port.
-@@ -308,3 +312,70 @@ Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
- };
- };
- };
-+
-+Example 4:
-+
-+&eth {
-+ gmac0: mac@0 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
-+ &mdio0 {
-+ switch@0 {
-+ compatible = "mediatek,mt7531";
-+ reg = <0>;
-+ reset-gpios = <&pio 54 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan0";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+ };
-+ };
-+ };
+--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
++++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+@@ -5,6 +5,7 @@ Required properties:
+
+ - compatible: may be compatible = "mediatek,mt7530"
+ or compatible = "mediatek,mt7621"
++ or compatible = "mediatek,mt7531"
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+ - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
+@@ -32,10 +33,13 @@ Required properties for the child nodes
+
+ - reg: Port address described must be 6 for CPU port and from 0 to 5 for
+ user ports.
+-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
+- "cpu".
++- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
++ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
++ must be either "trgmii" or "rgmii"
++ If compatible mediatek,mt7531 is set,
++ must be either "sgmii", "1000base-x" or "2500base-x"
+
+-Port 5 of the switch is muxed between:
++Port 5 of mt7530 and mt7621 switch is muxed between:
+ 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
+ 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
+ of the SOC. Used in many setups where port 0/4 becomes the WAN port.
+@@ -308,3 +312,70 @@ Example 3: MT7621: Port 5 is connected t
+ };
+ };
+ };
++
++Example 4:
++
++&eth {
++ gmac0: mac@0 {
++ compatible = "mediatek,eth-mac";
++ reg = <0>;
++ phy-mode = "2500base-x";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++ };
++
++ &mdio0 {
++ switch@0 {
++ compatible = "mediatek,mt7531";
++ reg = <0>;
++ reset-gpios = <&pio 54 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan0";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan3";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "2500base-x";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++ };
++ };
++ };
++ };
diff --git a/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch b/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
index a93b802c17..299ac24c79 100644
--- a/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
+++ b/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
@@ -87,10 +87,8 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
drivers/net/dsa/mt7530.h | 144 +++++++++
3 files changed, 784 insertions(+), 9 deletions(-)
-Index: linux-5.4.43/drivers/net/dsa/Kconfig
-===================================================================
---- linux-5.4.43.orig/drivers/net/dsa/Kconfig
-+++ linux-5.4.43/drivers/net/dsa/Kconfig
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
the xrx200 / VR9 SoC.
@@ -107,10 +105,8 @@ Index: linux-5.4.43/drivers/net/dsa/Kconfig
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
-Index: linux-5.4.43/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-5.4.43.orig/drivers/net/dsa/mt7530.c
-+++ linux-5.4.43/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u
}
@@ -882,10 +878,8 @@ Index: linux-5.4.43/drivers/net/dsa/mt7530.c
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);
-Index: linux-5.4.43/drivers/net/dsa/mt7530.h
-===================================================================
---- linux-5.4.43.orig/drivers/net/dsa/mt7530.h
-+++ linux-5.4.43/drivers/net/dsa/mt7530.h
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
@@ -14,6 +14,7 @@
enum mt753x_id {
ID_MT7530 = 0,
diff --git a/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch b/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
index a4899caee5..8919ad27e0 100644
--- a/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
+++ b/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
@@ -77,64 +77,62 @@ Signed-off-by: Landen Chao <landen.chao@mediatek.com>
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
-diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-index 83e10591e0e5..ffacefee8e2a 100644
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -143,6 +143,56 @@
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-+
-+ switch@0 {
-+ compatible = "mediatek,mt7531";
-+ reg = <0>;
-+ reset-gpios = <&pio 54 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan0";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan1";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan2";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "lan3";
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <2500>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+ };
-+ };
-+
- };
- };
-
+--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+@@ -150,6 +150,56 @@
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
++
++ switch@0 {
++ compatible = "mediatek,mt7531";
++ reg = <0>;
++ reset-gpios = <&pio 54 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "wan";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan0";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan1";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan2";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan3";
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "2500base-x";
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ pause;
++ };
++ };
++ };
++ };
++
+ };
+ };
+
diff --git a/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch b/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch
index 8c4de51aae..44d91da529 100644
--- a/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch
+++ b/target/linux/octeontx/patches-5.4/0002-gpio-thunderx-fix-irq_request_resources.patch
@@ -15,11 +15,9 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
drivers/gpio/gpio-thunderx.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
-diff --git a/drivers/gpio/gpio-thunderx.c b/drivers/gpio/gpio-thunderx.c
-index 715371b..feda2a2 100644
--- a/drivers/gpio/gpio-thunderx.c
+++ b/drivers/gpio/gpio-thunderx.c
-@@ -363,15 +363,18 @@ static int thunderx_gpio_irq_request_resources(struct irq_data *data)
+@@ -363,15 +363,18 @@ static int thunderx_gpio_irq_request_res
{
struct thunderx_line *txline = irq_data_get_irq_chip_data(data);
struct thunderx_gpio *txgpio = txline->txgpio;
@@ -41,6 +39,3 @@ index 715371b..feda2a2 100644
return r;
}
---
-2.7.4
-
diff --git a/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch b/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch
index 54906b786e..f760b2ac9a 100644
--- a/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch
+++ b/target/linux/octeontx/patches-5.4/0003-can-mcp251x-convert-to-half-duplex-SPI.patch
@@ -12,11 +12,9 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
drivers/net/can/spi/mcp251x.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
-diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
-index bb20a9b..dc0574a 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
-@@ -291,23 +291,23 @@ static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg)
+@@ -291,23 +291,23 @@ static u8 mcp251x_read_reg(struct spi_de
priv->spi_tx_buf[0] = INSTRUCTION_READ;
priv->spi_tx_buf[1] = reg;
@@ -45,7 +43,7 @@ index bb20a9b..dc0574a 100644
}
static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
-@@ -398,8 +398,9 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
+@@ -398,8 +398,9 @@ static void mcp251x_hw_rx_frame(struct s
buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
} else {
priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
@@ -57,6 +55,3 @@ index bb20a9b..dc0574a 100644
}
}
---
-2.7.4
-