diff options
4 files changed, 223 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9531_teltonika_rut300.dts b/target/linux/ath79/dts/qca9531_teltonika_rut300.dts new file mode 100644 index 0000000000..a4f5fb543b --- /dev/null +++ b/target/linux/ath79/dts/qca9531_teltonika_rut300.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "qca953x.dtsi" + +/ { + compatible = "teltonika,rut300", "teltonika,rut30x", "qca,qca9531"; + model = "TELTONIKA RUT300"; + + aliases { + label-mac-device = ð1; + led-boot = &led_wan; + led-failsafe = &led_wan; + led-running = &led_wan; + led-upgrade = &led_wan; + serial0 = &uart; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds_switch>, <&jtag_disable_pins>; + + led_wan: wan { + label = "yellow:wan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + lan1 { + label = "yellow:lan1"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + + lan2 { + label = "yellow:lan2"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + + lan3 { + label = "yellow:lan3"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + lan4 { + label = "yellow:lan4"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + config: partition@20000 { + label = "config"; + reg = <0x020000 0x010000>; + read-only; + }; + + partition@30000 { + label = "art"; + reg = <0x030000 0x010000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x040000 0xf30000>; + }; + + partition@f70000 { + label = "event-log"; + reg = <0xf70000 0x090000>; + }; + }; + }; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&config { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_config_0: macaddr@0 { + reg = <0x0 0x6>; + }; +}; + +ð0 { + status = "okay"; + phy-handle = <&swphy0>; + + nvmem-cells = <&macaddr_config_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; +}; + +ð1 { + phy-handle = <&swphy4>; + nvmem-cells = <&macaddr_config_0>; + nvmem-cell-names = "mac-address"; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; + +&pinmux { + pmx_leds_switch: leds_switch { + // switch port LEDs on GPIO 0~4 + pinctrl-single,bits = <0x0 0x00000000 0xffffffff>, + <0x4 0x00000000 0x000000ff>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 606a194f7e..7fe9343876 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -337,6 +337,13 @@ teltonika,rut230-v1) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x04" ;; +teltonika,rut300) + ucidef_set_led_netdev "wan" "WAN" "yellow:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "yellow:lan1" "switch0" "0x02" + ucidef_set_led_switch "lan2" "LAN2" "yellow:lan2" "switch0" "0x10" + ucidef_set_led_switch "lan3" "LAN3" "yellow:lan3" "switch0" "0x08" + ucidef_set_led_switch "lan4" "LAN4" "yellow:lan4" "switch0" "0x04" + ;; tplink,archer-a7-v5|\ tplink,archer-c7-v4|\ tplink,archer-c7-v5) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index e47f66c2f2..339005f051 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -193,6 +193,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" ;; + teltonika,rut300) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" + ;; buffalo,wzr-hp-g300nh-rb|\ buffalo,wzr-hp-g300nh-s|\ dlink,dir-825-b1|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 11c5669fe4..e5bc73e5a6 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -10,6 +10,7 @@ DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL DEVICE_VARS += OPENMESH_CE_TYPE ZYXEL_MODEL_STRING +DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES define Build/addpattern -$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \ @@ -139,6 +140,35 @@ define Build/teltonika-v1-header @mv $@.new $@ endef +metadata_json_teltonika = \ + '{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \ + "metadata_version": "1.1", \ + "compat_version": "$(call json_quote,$(compat_version))", \ + "version":"$(call json_quote,$(VERSION_DIST))-$(call json_quote,$(VERSION_NUMBER))-$(call json_quote,$(REVISION))", \ + "device_code": [".*"], \ + "hwver": [".*"], \ + "batch": [".*"], \ + "serial": [".*"], \ + $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \ + $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \ + [$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma) \ + "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \ + $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma)) \ + "version_wrt": { \ + "dist": "$(call json_quote,$(VERSION_DIST))", \ + "version": "$(call json_quote,$(VERSION_NUMBER))", \ + "revision": "$(call json_quote,$(REVISION))", \ + "target": "$(call json_quote,$(TARGETID))", \ + "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \ + }, \ + "hw_support": {}, \ + "hw_mods": {} \ + }' + +define Build/append-metadata-teltonika + echo $(call metadata_json_teltonika) | fwtool -I - $@ +endef + define Build/wrgg-pad-rootfs $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@ endef @@ -2527,6 +2557,23 @@ define Device/teltonika_rut230-v1 endef TARGET_DEVICES += teltonika_rut230-v1 +define Device/teltonika_rut300 + SOC := qca9531 + DEVICE_VENDOR := Teltonika + DEVICE_MODEL := RUT300 + SUPPORTED_TELTONIKA_DEVICES := teltonika,rut30x + DEVICE_PACKAGES := -kmod-ath9k -uboot-envtools -wpad-basic-wolfssl kmod-usb2 + IMAGE_SIZE := 15552k + IMAGES += factory.bin + IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata-teltonika | \ + check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | \ + check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += teltonika_rut300 + define Device/teltonika_rut955 SOC := ar9344 DEVICE_VENDOR := Teltonika |