diff options
126 files changed, 26249 insertions, 1 deletions
diff --git a/config/Config-images.in b/config/Config-images.in index 0252ef6425..5615141b75 100644 --- a/config/Config-images.in +++ b/config/Config-images.in @@ -17,6 +17,7 @@ menu "Target Images" default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips + default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_ipq807x default TARGET_INITRAMFS_COMPRESSION_XZ if USES_SEPARATE_INITRAMFS default TARGET_INITRAMFS_COMPRESSION_NONE depends on TARGET_ROOTFS_INITRAMFS diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk index 4ee70d7eb9..9c2e01357a 100644 --- a/package/kernel/linux/modules/usb.mk +++ b/package/kernel/linux/modules/usb.mk @@ -494,7 +494,7 @@ $(eval $(call KernelPackage,usb-dwc3)) define KernelPackage/usb-dwc3-qcom TITLE:=DWC3 Qualcomm USB driver - DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3 + DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x) +kmod-usb-dwc3 KCONFIG:= CONFIG_USB_DWC3_QCOM FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1) diff --git a/target/linux/ipq807x/Makefile b/target/linux/ipq807x/Makefile new file mode 100644 index 0000000000..e17013136a --- /dev/null +++ b/target/linux/ipq807x/Makefile @@ -0,0 +1,21 @@ +include $(TOPDIR)/rules.mk + +ARCH:=aarch64 +BOARD:=ipq807x +BOARDNAME:=Qualcomm Atheros IPQ807x +FEATURES:=squashfs ramdisk fpu nand rtc +KERNELNAME:=Image dtbs +CPU_TYPE:=cortex-a53 +SUBTARGETS:=generic + +KERNEL_PATCHVER:=5.15 + +include $(INCLUDE_DIR)/target.mk +DEFAULT_PACKAGES += \ + kmod-usb3 kmod-usb-dwc3 kmod-usb-dwc3-qcom \ + kmod-leds-gpio kmod-gpio-button-hotplug \ + libwolfsslcpu-crypto \ + ath11k-firmware-ipq8074 \ + wpad-basic-wolfssl uboot-envtools + +$(eval $(call BuildTarget)) diff --git a/target/linux/ipq807x/config-5.15 b/target/linux/ipq807x/config-5.15 new file mode 100644 index 0000000000..f979f9a28a --- /dev/null +++ b/target/linux/ipq807x/config-5.15 @@ -0,0 +1,507 @@ +CONFIG_64BIT=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +CONFIG_AQUANTIA_PHY=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANTS_NO_INSTR=y +CONFIG_ARM64=y +CONFIG_ARM64_4K_PAGES=y +CONFIG_ARM64_CRYPTO=y +CONFIG_ARM64_ERRATUM_1165522=y +CONFIG_ARM64_ERRATUM_1286807=y +CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_PTR_AUTH=y +CONFIG_ARM64_PTR_AUTH_KERNEL=y +CONFIG_ARM64_SVE=y +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y +CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_ARM_MHU_V2 is not set +CONFIG_ARM_PSCI_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_PM=y +CONFIG_CAVIUM_TX2_ERRATUM_219=y +CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_COMPAT_32BIT_TIME is not set +CONFIG_COREDUMP=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_THERMAL=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_THERMAL=y +CONFIG_CRC16=y +CONFIG_CRC8=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_QCE=y +CONFIG_CRYPTO_DEV_QCE_AEAD=y +# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set +CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y +# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set +# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set +CONFIG_CRYPTO_DEV_QCE_SHA=y +CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y +CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEV_COREDUMP=y +CONFIG_DMADEVICES=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +CONFIG_EDAC_SUPPORT=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FRAME_POINTER=y +CONFIG_FUJITSU_ERRATUM_010001=y +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GLOB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_CDEV=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +# CONFIG_I2C_QCOM_CCI is not set +CONFIG_I2C_QUP=y +CONFIG_IIO=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IPQ_APSS_6018=y +CONFIG_IPQ_APSS_PLL=y +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_806X is not set +CONFIG_IPQ_GCC_8074=y +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_KPSS_XCC is not set +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MAILBOX=y +# CONFIG_MAILBOX_TEST is not set +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MDIO_IPQ4019=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_HI6421_SPMI is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_CQHCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MODULES_USE_ELF_RELA=y +# CONFIG_MSM_GCC_8660 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8939 is not set +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_MSM_GPUCC_8998 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_MMCC_8974 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_MMCC_8998 is not set +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_QCOMSMEM_PARTS=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SELFTESTS=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y +CONFIG_NVMEM=y +CONFIG_NVMEM_QCOM_QFPROM=y +# CONFIG_NVMEM_SPMI_SDAM is not set +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_PADATA=y +CONFIG_PARTITION_PERCPU=y +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_PERFORMANCE is not set +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +CONFIG_PCIE_PME=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYLIB=y +CONFIG_PHYS_ADDR_T_64BIT=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ4019_USB is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_USB is not set +# CONFIG_PHY_QCOM_PCIE2 is not set +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_QUSB2=y +# CONFIG_PHY_QCOM_USB_HS_28NM is not set +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_QCOM_USB_SS is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +CONFIG_PINCTRL_IPQ8074=y +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8226 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MSM8976 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SDM660 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +CONFIG_PM=y +# CONFIG_PM8916_WATCHDOG is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +CONFIG_POWER_SUPPLY=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_AOSS_QMP is not set +CONFIG_QCOM_APCS_IPC=y +CONFIG_QCOM_APM=y +# CONFIG_QCOM_APR is not set +CONFIG_QCOM_BAM_DMA=y +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCS_SDX55 is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_QCOM_FASTRPC is not set +CONFIG_QCOM_GDSC=y +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_GSBI is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_QCOM_LLCC is not set +CONFIG_QCOM_MDT_LOADER=y +# CONFIG_QCOM_OCMEM is not set +# CONFIG_QCOM_PDC is not set +CONFIG_QCOM_PIL_INFO=y +# CONFIG_QCOM_Q6V5_ADSP is not set +CONFIG_QCOM_Q6V5_COMMON=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +CONFIG_QCOM_Q6V5_WCSS=y +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +CONFIG_QCOM_RPROC_COMMON=y +CONFIG_QCOM_SCM=y +# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +# CONFIG_QCOM_SMD_RPM is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMEM_STATE=y +CONFIG_QCOM_SMP2P=y +# CONFIG_QCOM_SMSM is not set +CONFIG_QCOM_SOCINFO=y +CONFIG_QCOM_SPMI_ADC5=y +# CONFIG_QCOM_SYSMON is not set +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_VADC_COMMON=y +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_WCNSS_PIL is not set +CONFIG_QCOM_WDT=y +# CONFIG_QCS_GCC_404 is not set +# CONFIG_QCS_Q6SSTOP_404 is not set +# CONFIG_QCS_TURING_404 is not set +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_CPR3=y +# CONFIG_REGULATOR_CPR3_NPU is not set +CONFIG_REGULATOR_CPR4_APSS=y +# CONFIG_REGULATOR_QCOM_LABIBB is not set +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_QCOM_USB_VBUS is not set +# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set +CONFIG_RELOCATABLE=y +CONFIG_REMOTEPROC=y +CONFIG_REMOTEPROC_CDEV=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +CONFIG_RFS_ACCEL=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +CONFIG_RPMSG=y +CONFIG_RPMSG_CHAR=y +# CONFIG_RPMSG_NS is not set +CONFIG_RPMSG_QCOM_GLINK=y +CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=y +CONFIG_RPMSG_QCOM_SMD=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PM8XXX=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SCHED_CORE is not set +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_SCHED_THERMAL_PRESSURE=y +CONFIG_SCSI=y +CONFIG_SCSI_COMMON=y +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SC_DISPCC_7180 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GPUCC_7180 is not set +# CONFIG_SC_LPASS_CORECC_7180 is not set +# CONFIG_SC_MSS_7180 is not set +# CONFIG_SC_VIDEOCC_7180 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SDM_GCC_660 is not set +# CONFIG_SDM_GCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_LPASSCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SG_POOL=y +CONFIG_SMP=y +# CONFIG_SM_GCC_8150 is not set +# CONFIG_SM_GCC_8250 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_SM_VIDEOCC_8150 is not set +# CONFIG_SM_VIDEOCC_8250 is not set +CONFIG_SOCK_RX_QUEUE_MAPPING=y +CONFIG_SOC_BUS=y +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +# CONFIG_SPMI_HISI3670 is not set +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_SPMI_PMIC_CLKDIV is not set +CONFIG_SRCU=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_OF=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +# CONFIG_UCLAMP_TASK is not set +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_VIRTIO=y +# CONFIG_VIRTIO_BLK is not set +# CONFIG_VIRTIO_NET is not set +CONFIG_VMAP_STACK=y +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_WATCHDOG_CORE=y +CONFIG_WATCHDOG_SYSFS=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA32=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi new file mode 100644 index 0000000000..dace4008b3 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "ipq8074.dtsi" + +&tzapp_region { + reg = <0x0 0x4a400000 0x0 0x100000>; +}; + +&q6_region { + reg = <0x0 0x4b000000 0x0 0x3700000>; +}; + +&q6_etr_region { + reg = <0x0 0x4e700000 0x0 0x100000>; +}; + +&m3_dump_region { + reg = <0x0 0x4e800000 0x0 0x100000>; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi new file mode 100644 index 0000000000..dbc9baa2b9 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/thermal/thermal.h> +#include "ipq8074-cpr-regulator.dtsi" + +&CPU0 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU1 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU2 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU3 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; +&cpu0_thermal { + trips { + cpu0_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu1_thermal { + trips { + cpu1_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cluster_thermal { + trips { + cluster_passive: cluster-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_crit: cluster_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cluster_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi new file mode 100644 index 0000000000..e351a2e759 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "pmp8074.dtsi" + +&soc { + apc_apm: apm@b111000 { + compatible = "qcom,ipq807x-apm"; + reg = <0xb111000 0x1000>; + reg-names = "pm-apcc-glb"; + qcom,apm-post-halt-delay = <0x2>; + qcom,apm-halt-clk-delay = <0x11>; + qcom,apm-resume-clk-delay = <0x10>; + qcom,apm-sel-switch-delay = <0x01>; + }; + + apc_cpr: cpr4-ctrl@b018000 { + compatible = "qcom,cpr4-ipq807x-apss-regulator"; + reg = <0xb018000 0x4000>, <0xa4000 0x1000>, <0x0193d008 0x4>; + reg-names = "cpr_ctrl", "fuse_base", "cpr_tcsr_reg"; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cpr"; + qcom,cpr-ctrl-name = "apc"; + qcom,cpr-sensor-time = <1000>; + qcom,cpr-loop-time = <5000000>; + qcom,cpr-idle-cycles = <15>; + qcom,cpr-step-quot-init-min = <12>; + qcom,cpr-step-quot-init-max = <14>; + qcom,cpr-count-mode = <0>; /* All-at-once */ + qcom,cpr-count-repeat = <14>; + qcom,cpr-down-error-step-limit = <1>; + qcom,cpr-up-error-step-limit = <1>; + qcom,apm-ctrl = <&apc_apm>; + qcom,apm-threshold-voltage = <848000>; + vdd-supply = <&s3>; + qcom,voltage-step = <8000>; + + thread@0 { + qcom,cpr-thread-id = <0>; + qcom,cpr-consecutive-up = <0>; + qcom,cpr-consecutive-down = <0>; + qcom,cpr-up-threshold = <4>; + qcom,cpr-down-threshold = <1>; + + apc_vreg: regulator { + regulator-name = "apc_corner"; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <6>; + qcom,cpr-part-types = <2>; + qcom,cpr-parts-voltage = <1048000>; + qcom,cpr-parts-voltage-v2 = <992000>; + qcom,cpr-fuse-corners = <4>; + qcom,cpr-fuse-combos = <8>; + qcom,cpr-corners = <6>; + qcom,cpr-speed-bins = <1>; + qcom,cpr-speed-bin-corners = <6>; + qcom,cpr-corner-fmax-map = <1 3 5 6>; + qcom,allow-voltage-interpolation; + qcom,allow-quotient-interpolation; + qcom,cpr-scaled-open-loop-voltage-as-ceiling; + qcom,cpr-voltage-ceiling = + <840000 904000 944000 + 984000 992000 1064000>; + qcom,cpr-voltage-floor = + <592000 648000 712000 + 744000 784000 848000>; + qcom,corner-frequencies = + <1017600000 1382400000 1651200000 + 1843200000 1920000000 2208000000>; + + /* TT/FF parts i.e. turbo L1 OL voltage < 1048 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 12000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* SS parts i.e turbo L1 OL voltage >= 1048 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 20000 26000 0 20000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 7000 36000 4000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ + qcom,cpr-closed-loop-voltage-adjustment-v2-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ + qcom,cpr-closed-loop-voltage-adjustment-v2-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 19000 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + qcom,cpr-ro-scaling-factor = + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >; + + qcom,cpr-floor-to-ceiling-max-range = + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>; + regulator-always-on; + }; + }; + }; + + npu_cpr: npu-cpr { + compatible = "qcom,cpr3-ipq807x-npu-regulator"; + reg = <0xa4000 0x1000>, <0x0193d008 0x4>; + reg-names = "fuse_base", "cpr_tcsr_reg"; + qcom,cpr-ctrl-name = "npu"; + vdd-supply = <&s4>; + qcom,voltage-step = <8000>; + thread@0 { + qcom,cpr-thread-id = <0>; + qcom,cpr-consecutive-up = <0>; + qcom,cpr-consecutive-down = <2>; + qcom,cpr-up-threshold = <2>; + qcom,cpr-down-threshold = <1>; + + npu_vreg: regulator { + regulator-name = "npu_corner"; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <3>; + qcom,cpr-part-types = <2>; + qcom,cpr-parts-voltage = <968000>; + qcom,cpr-parts-voltage-v2 = <832001>; + qcom,cpr-cold-temp-threshold-v2 = <30>; + qcom,cpr-fuse-corners = <2>; + qcom,cpr-fuse-combos = <1>; + qcom,cpr-corners = <2>; + qcom,cpr-speed-bins = <1>; + qcom,cpr-speed-bin-corners = <2>; + qcom,allow-voltage-interpolation; + qcom,cpr-corner-fmax-map = <1 2>; + qcom,cpr-voltage-ceiling = + <912000 992000>; + qcom,cpr-voltage-floor = + <752000 792000>; + qcom,corner-frequencies = + <1497600000 1689600000>; + + /* TT/FF parts i.e. turbo OL voltage < 968 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-0 = + < 40000 40000>; + + /* SS parts i.e turbo OL voltage >= 968 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-1 = + < 24000 24000>; + + /* FF parts i.e. turbo OL voltage <= 832 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0= + <40000 40000>; + + /* TT/SS parts i.e turbo OL voltage > 832 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1= + <40000 40000>; + + /* FF parts i.e. turbo OL voltage <= 832 mV */ + qcom,cpr-cold-temp-voltage-adjustment-v2-0 = + <0 0>; + + /* TT/SS parts i.e turbo OL voltage > 832 mV */ + qcom,cpr-cold-temp-voltage-adjustment-v2-1 = + <35000 27000>; + }; + }; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi new file mode 100644 index 0000000000..129266c50d --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: GPL-2.0-only + +&clocks { + bias_pll_cc_clk { + compatible = "fixed-clock"; + clock-frequency = <300000000>; + #clock-cells = <0>; + }; + + bias_pll_nss_noc_clk { + compatible = "fixed-clock"; + clock-frequency = <416500000>; + #clock-cells = <0>; + }; +}; + +&soc { + switch: ess-switch@3a000000 { + compatible = "qcom,ess-switch-ipq807x"; + reg = <0x3a000000 0x1000000>; + switch_access_mode = "local bus"; + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_inner_bmp = <0x80>; /*inner port bitmap*/ + clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>, + <&gcc GCC_CMN_12GPLL_SYS_CLK>, + <&gcc GCC_UNIPHY0_AHB_CLK>, + <&gcc GCC_UNIPHY0_SYS_CLK>, + <&gcc GCC_UNIPHY1_AHB_CLK>, + <&gcc GCC_UNIPHY1_SYS_CLK>, + <&gcc GCC_UNIPHY2_AHB_CLK>, + <&gcc GCC_UNIPHY2_SYS_CLK>, + <&gcc GCC_PORT1_MAC_CLK>, + <&gcc GCC_PORT2_MAC_CLK>, + <&gcc GCC_PORT3_MAC_CLK>, + <&gcc GCC_PORT4_MAC_CLK>, + <&gcc GCC_PORT5_MAC_CLK>, + <&gcc GCC_PORT6_MAC_CLK>, + <&gcc GCC_NSS_PPE_CLK>, + <&gcc GCC_NSS_PPE_CFG_CLK>, + <&gcc GCC_NSSNOC_PPE_CLK>, + <&gcc GCC_NSSNOC_PPE_CFG_CLK>, + <&gcc GCC_NSS_EDMA_CLK>, + <&gcc GCC_NSS_EDMA_CFG_CLK>, + <&gcc GCC_NSS_PPE_IPE_CLK>, + <&gcc GCC_NSS_PPE_BTQ_CLK>, + <&gcc GCC_MDIO_AHB_CLK>, + <&gcc GCC_NSS_NOC_CLK>, + <&gcc GCC_NSSNOC_SNOC_CLK>, + <&gcc GCC_MEM_NOC_NSS_AXI_CLK>, + <&gcc GCC_NSS_CRYPTO_CLK>, + <&gcc GCC_NSS_IMEM_CLK>, + <&gcc GCC_NSS_PTP_REF_CLK>, + <&gcc GCC_NSS_PORT1_RX_CLK>, + <&gcc GCC_NSS_PORT1_TX_CLK>, + <&gcc GCC_NSS_PORT2_RX_CLK>, + <&gcc GCC_NSS_PORT2_TX_CLK>, + <&gcc GCC_NSS_PORT3_RX_CLK>, + <&gcc GCC_NSS_PORT3_TX_CLK>, + <&gcc GCC_NSS_PORT4_RX_CLK>, + <&gcc GCC_NSS_PORT4_TX_CLK>, + <&gcc GCC_NSS_PORT5_RX_CLK>, + <&gcc GCC_NSS_PORT5_TX_CLK>, + <&gcc GCC_NSS_PORT6_RX_CLK>, + <&gcc GCC_NSS_PORT6_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT1_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT1_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT2_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT2_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT3_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT3_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT4_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT4_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT5_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT5_TX_CLK>, + <&gcc GCC_UNIPHY1_PORT5_RX_CLK>, + <&gcc GCC_UNIPHY1_PORT5_TX_CLK>, + <&gcc GCC_UNIPHY2_PORT6_RX_CLK>, + <&gcc GCC_UNIPHY2_PORT6_TX_CLK>, + <&gcc NSS_PORT5_RX_CLK_SRC>, + <&gcc NSS_PORT5_TX_CLK_SRC>; + clock-names = "cmn_ahb_clk", "cmn_sys_clk", + "uniphy0_ahb_clk", "uniphy0_sys_clk", + "uniphy1_ahb_clk", "uniphy1_sys_clk", + "uniphy2_ahb_clk", "uniphy2_sys_clk", + "port1_mac_clk", "port2_mac_clk", + "port3_mac_clk", "port4_mac_clk", + "port5_mac_clk", "port6_mac_clk", + "nss_ppe_clk", "nss_ppe_cfg_clk", + "nssnoc_ppe_clk", "nssnoc_ppe_cfg_clk", + "nss_edma_clk", "nss_edma_cfg_clk", + "nss_ppe_ipe_clk", "nss_ppe_btq_clk", + "gcc_mdio_ahb_clk", "gcc_nss_noc_clk", + "gcc_nssnoc_snoc_clk", + "gcc_mem_noc_nss_axi_clk", + "gcc_nss_crypto_clk", + "gcc_nss_imem_clk", + "gcc_nss_ptp_ref_clk", + "nss_port1_rx_clk", "nss_port1_tx_clk", + "nss_port2_rx_clk", "nss_port2_tx_clk", + "nss_port3_rx_clk", "nss_port3_tx_clk", + "nss_port4_rx_clk", "nss_port4_tx_clk", + "nss_port5_rx_clk", "nss_port5_tx_clk", + "nss_port6_rx_clk", "nss_port6_tx_clk", + "uniphy0_port1_rx_clk", + "uniphy0_port1_tx_clk", + "uniphy0_port2_rx_clk", + "uniphy0_port2_tx_clk", + "uniphy0_port3_rx_clk", + "uniphy0_port3_tx_clk", + "uniphy0_port4_rx_clk", + "uniphy0_port4_tx_clk", + "uniphy0_port5_rx_clk", + "uniphy0_port5_tx_clk", + "uniphy1_port5_rx_clk", + "uniphy1_port5_tx_clk", + "uniphy2_port6_rx_clk", + "uniphy2_port6_tx_clk", + "nss_port5_rx_clk_src", + "nss_port5_tx_clk_src"; + resets = <&gcc GCC_PPE_FULL_RESET>, + <&gcc GCC_UNIPHY0_SOFT_RESET>, + <&gcc GCC_UNIPHY0_XPCS_RESET>, + <&gcc GCC_UNIPHY1_SOFT_RESET>, + <&gcc GCC_UNIPHY1_XPCS_RESET>, + <&gcc GCC_UNIPHY2_SOFT_RESET>, + <&gcc GCC_UNIPHY2_XPCS_RESET>, + <&gcc GCC_NSSPORT1_RESET>, + <&gcc GCC_NSSPORT2_RESET>, + <&gcc GCC_NSSPORT3_RESET>, + <&gcc GCC_NSSPORT4_RESET>, + <&gcc GCC_NSSPORT5_RESET>, + <&gcc GCC_NSSPORT6_RESET>; + reset-names = "ppe_rst", "uniphy0_soft_rst", + "uniphy0_xpcs_rst", "uniphy1_soft_rst", + "uniphy1_xpcs_rst", "uniphy2_soft_rst", + "uniphy2_xpcs_rst", "nss_port1_rst", + "nss_port2_rst", "nss_port3_rst", + "nss_port4_rst", "nss_port5_rst", + "nss_port6_rst"; + mdio-bus = <&mdio>; + status = "disabled"; + + port_scheduler_resource { + port@0 { + port_id = <0>; + ucast_queue = <0 143>; + mcast_queue = <256 271>; + l0sp = <0 35>; + l0cdrr = <0 47>; + l0edrr = <0 47>; + l1cdrr = <0 7>; + l1edrr = <0 7>; + }; + port@1 { + port_id = <1>; + ucast_queue = <144 159>; + mcast_queue = <272 275>; + l0sp = <36 39>; + l0cdrr = <48 63>; + l0edrr = <48 63>; + l1cdrr = <8 11>; + l1edrr = <8 11>; + }; + port@2 { + port_id = <2>; + ucast_queue = <160 175>; + mcast_queue = <276 279>; + l0sp = <40 43>; + l0cdrr = <64 79>; + l0edrr = <64 79>; + l1cdrr = <12 15>; + l1edrr = <12 15>; + }; + port@3 { + port_id = <3>; + ucast_queue = <176 191>; + mcast_queue = <280 283>; + l0sp = <44 47>; + l0cdrr = <80 95>; + l0edrr = <80 95>; + l1cdrr = <16 19>; + l1edrr = <16 19>; + }; + port@4 { + port_id = <4>; + ucast_queue = <192 207>; + mcast_queue = <284 287>; + l0sp = <48 51>; + l0cdrr = <96 111>; + l0edrr = <96 111>; + l1cdrr = <20 23>; + l1edrr = <20 23>; + }; + port@5 { + port_id = <5>; + ucast_queue = <208 223>; + mcast_queue = <288 291>; + l0sp = <52 55>; + l0cdrr = <112 127>; + l0edrr = <112 127>; + l1cdrr = <24 27>; + l1edrr = <24 27>; + }; + port@6 { + port_id = <6>; + ucast_queue = <224 239>; + mcast_queue = <292 295>; + l0sp = <56 59>; + l0cdrr = <128 143>; + l0edrr = <128 143>; + l1cdrr = <28 31>; + l1edrr = <28 31>; + }; + port@7 { + port_id = <7>; + ucast_queue = <240 255>; + mcast_queue = <296 299>; + l0sp = <60 63>; + l0cdrr = <144 159>; + l0edrr = <144 159>; + l1cdrr = <32 35>; + l1edrr = <32 35>; + }; + }; + port_scheduler_config { + port@0 { + port_id = <0>; + l1scheduler { + group@0 { + sp = <0 1>; /*L0 SPs*/ + /*cpri cdrr epri edrr*/ + cfg = <0 0 0 0>; + }; + }; + l0scheduler { + group@0 { + /*unicast queues*/ + ucast_queue = <0 4 8>; + /*multicast queues*/ + mcast_queue = <256 260>; + /*sp cpri cdrr epri edrr*/ + cfg = <0 0 0 0 0>; + }; + group@1 { + ucast_queue = <1 5 9>; + mcast_queue = <257 261>; + cfg = <0 1 1 1 1>; + }; + group@2 { + ucast_queue = <2 6 10>; + mcast_queue = <258 262>; + cfg = <0 2 2 2 2>; + }; + group@3 { + ucast_queue = <3 7 11>; + mcast_queue = <259 263>; + cfg = <0 3 3 3 3>; + }; + }; + }; + port@1 { + port_id = <1>; + l1scheduler { + group@0 { + sp = <36>; + cfg = <0 8 0 8>; + }; + group@1 { + sp = <37>; + cfg = <1 9 1 9>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <144>; + ucast_loop_pri = <16>; + mcast_queue = <272>; + mcast_loop_pri = <4>; + cfg = <36 0 48 0 48>; + }; + }; + }; + port@2 { + port_id = <2>; + l1scheduler { + group@0 { + sp = <40>; + cfg = <0 12 0 12>; + }; + group@1 { + sp = <41>; + cfg = <1 13 1 13>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <160>; + ucast_loop_pri = <16>; + mcast_queue = <276>; + mcast_loop_pri = <4>; + cfg = <40 0 64 0 64>; + }; + }; + }; + port@3 { + port_id = <3>; + l1scheduler { + group@0 { + sp = <44>; + cfg = <0 16 0 16>; + }; + group@1 { + sp = <45>; + cfg = <1 17 1 17>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <176>; + ucast_loop_pri = <16>; + mcast_queue = <280>; + mcast_loop_pri = <4>; + cfg = <44 0 80 0 80>; + }; + }; + }; + port@4 { + port_id = <4>; + l1scheduler { + group@0 { + sp = <48>; + cfg = <0 20 0 20>; + }; + group@1 { + sp = <49>; + cfg = <1 21 1 21>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <192>; + ucast_loop_pri = <16>; + mcast_queue = <284>; + mcast_loop_pri = <4>; + cfg = <48 0 96 0 96>; + }; + }; + }; + port@5 { + port_id = <5>; + l1scheduler { + group@0 { + sp = <52>; + cfg = <0 24 0 24>; + }; + group@1 { + sp = <53>; + cfg = <1 25 1 25>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <208>; + ucast_loop_pri = <16>; + mcast_queue = <288>; + mcast_loop_pri = <4>; + cfg = <52 0 112 0 112>; + }; + }; + }; + port@6 { + port_id = <6>; + l1scheduler { + group@0 { + sp = <56>; + cfg = <0 28 0 28>; + }; + group@1 { + sp = <57>; + cfg = <1 29 1 29>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <224>; + ucast_loop_pri = <16>; + mcast_queue = <292>; + mcast_loop_pri = <4>; + cfg = <56 0 128 0 128>; + }; + }; + }; + port@7 { + port_id = <7>; + l1scheduler { + group@0 { + sp = <60>; + cfg = <0 32 0 32>; + }; + group@1 { + sp = <61>; + cfg = <1 33 1 33>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <240>; + ucast_loop_pri = <16>; + mcast_queue = <296>; + cfg = <60 0 144 0 144>; + }; + }; + }; + }; + }; + + ess-uniphy@7a00000 { + compatible = "qcom,ess-uniphy"; + reg = <0x7a00000 0x30000>; + uniphy_access_mode = "local bus"; + }; + + edma: edma@3ab00000 { + compatible = "qcom,edma"; + reg = <0x3ab00000 0x76900>; + reg-names = "edma-reg-base"; + qcom,txdesc-ring-start = <23>; + qcom,txdesc-rings = <1>; + qcom,txcmpl-ring-start = <7>; + qcom,txcmpl-rings = <1>; + qcom,rxfill-ring-start = <7>; + qcom,rxfill-rings = <1>; + qcom,rxdesc-ring-start = <15>; + qcom,rxdesc-rings = <1>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + resets = <&gcc GCC_EDMA_HW_RESET>; + reset-names = "edma_rst"; + status = "disabled"; + }; + + dp1: dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <1>; + reg = <0x3a001000 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp2: dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <2>; + reg = <0x3a001200 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp3: dp3 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <3>; + reg = <0x3a001400 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp4: dp4 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <4>; + reg = <0x3a001600 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp5: dp5 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <5>; + reg = <0x3a001800 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp6: dp6 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <6>; + reg = <0x3a001a00 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp5_syn: dp5-syn { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <5>; + reg = <0x3a003000 0x3fff>; + qcom,mactype = <1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp6_syn: dp6-syn { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <6>; + reg = <0x3a007000 0x3fff>; + qcom,mactype = <1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi new file mode 100644 index 0000000000..8485814969 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/thermal/thermal.h> +#include "ipq8074-cpr-regulator.dtsi" + +&CPU0 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU1 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU2 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU3 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; +&cpu0_thermal { + trips { + cpu0_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu1_thermal { + trips { + cpu1_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cluster_thermal { + trips { + cluster_passive_low: cluster-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_passive_high: cluster-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_crit: cluster_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cluster_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cluster_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/target/linux/ipq807x/generic/target.mk b/target/linux/ipq807x/generic/target.mk new file mode 100644 index 0000000000..f5cb1fb19b --- /dev/null +++ b/target/linux/ipq807x/generic/target.mk @@ -0,0 +1 @@ +BOARDNAME:=Generic diff --git a/target/linux/ipq807x/image/Makefile b/target/linux/ipq807x/image/Makefile new file mode 100644 index 0000000000..f59ad0c15f --- /dev/null +++ b/target/linux/ipq807x/image/Makefile @@ -0,0 +1,17 @@ +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Device/Default + PROFILES := Default + KERNEL_LOADADDR := 0x41000000 + DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) + DEVICE_DTS_CONFIG := config@1 + DEVICE_DTS_DIR := $(DTS_DIR)/qcom + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata + IMAGE/sysupgrade.bin/squashfs := +endef + +include $(SUBTARGET).mk + +$(eval $(call BuildImage)) diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk new file mode 100644 index 0000000000..91a3daeedf --- /dev/null +++ b/target/linux/ipq807x/image/generic.mk @@ -0,0 +1,18 @@ +define Device/FitImage + KERNEL_SUFFIX := -uImage.itb + KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb + KERNEL_NAME := Image +endef + +define Device/FitImageLzma + KERNEL_SUFFIX := -uImage.itb + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb + KERNEL_NAME := Image +endef + +define Device/UbiFit + KERNEL_IN_UBI := 1 + IMAGES := factory.ubi sysupgrade.bin + IMAGE/factory.ubi := append-ubi + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef diff --git a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch new file mode 100644 index 0000000000..c988814156 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch @@ -0,0 +1,43 @@ +From adf62d2727d4aa2b587e2db59eafb5be776a653c Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 5 Sep 2021 18:58:16 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add SPMI bus + +IPQ8074 uses SPMI for communication with the PMIC, so +since its already supported add the DT node for it. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -293,6 +293,25 @@ + #reset-cells = <0x1>; + }; + ++ spmi_bus: spmi@200f000 { ++ compatible = "qcom,spmi-pmic-arb"; ++ reg = <0x0200f000 0x001000>, ++ <0x02400000 0x800000>, ++ <0x02c00000 0x800000>, ++ <0x03800000 0x200000>, ++ <0x0200a000 0x000700>; ++ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; ++ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "periph_irq"; ++ qcom,ee = <0>; ++ qcom,channel = <0>; ++ #address-cells = <2>; ++ #size-cells = <0>; ++ interrupt-controller; ++ #interrupt-cells = <4>; ++ cell-index = <0>; ++ }; ++ + sdhc_1: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; diff --git a/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch new file mode 100644 index 0000000000..ec4c3552f0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch @@ -0,0 +1,26 @@ +From 94343612f165fc8b4f95fcbe6fd044d6f63d4a28 Mon Sep 17 00:00:00 2001 +From: Shawn Guo <shawn.guo@linaro.org> +Date: Tue, 31 Aug 2021 13:23:25 +0800 +Subject: [PATCH] arm64: dts: qcom: Update BAM DMA node name per DT schema + +Follow dma-controller.yaml schema to use `dma-controller` as node name +of BAM DMA devices. + +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -212,7 +212,7 @@ + status = "disabled"; + }; + +- cryptobam: dma@704000 { ++ cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; diff --git a/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch b/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch new file mode 100644 index 0000000000..4cc81e64c4 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch @@ -0,0 +1,40 @@ +From ccc5b088058bccdf454bd296867c47e56c415cde Mon Sep 17 00:00:00 2001 +From: Chukun Pan <amadeus@jmu.edu.cn> +Date: Fri, 1 Oct 2021 22:54:21 +0800 +Subject: [PATCH] arm64: dts: qcom: ipq8074: Add QUP5 I2C node + +Add node to support the QUP5 I2C controller inside of IPQ8074. +It is exactly the same as QUP2 controllers. +Some routers like ZTE MF269 use this bus. + +Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -430,6 +430,21 @@ + status = "disabled"; + }; + ++ blsp1_i2c5: i2c@78b9000 { ++ compatible = "qcom,i2c-qup-v2.2.1"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x78b9000 0x600>; ++ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&gcc GCC_BLSP1_AHB_CLK>, ++ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; ++ clock-names = "iface", "core"; ++ clock-frequency = <400000>; ++ dmas = <&blsp_dma 21>, <&blsp_dma 20>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ }; ++ + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch b/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch new file mode 100644 index 0000000000..b001e81b3a --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch @@ -0,0 +1,53 @@ +From 1a82d7080001d395563ad8266d120d4cf63ad0a5 Mon Sep 17 00:00:00 2001 +From: Shawn Guo <shawn.guo@linaro.org> +Date: Wed, 29 Sep 2021 11:42:46 +0800 +Subject: [PATCH] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY + child node + +'#clock-cells' is a required property of QMP PHY child node, not itself. +Move it to fix the dtbs_check warnings. + +There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because +child nodes already have the property. + +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -91,7 +91,6 @@ + ssphy_1: phy@58000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00058000 0x1c4>; +- #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -112,6 +111,7 @@ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; ++ #clock-cells = <1>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; +@@ -134,7 +134,6 @@ + ssphy_0: phy@78000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00078000 0x1c4>; +- #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -155,6 +154,7 @@ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; ++ #clock-cells = <1>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch b/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch new file mode 100644 index 0000000000..51b58ed238 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch @@ -0,0 +1,94 @@ +From a9ab8f5de2fc752e37918cfd5dcd16d625d9ecb2 Mon Sep 17 00:00:00 2001 +From: Shawn Guo <shawn.guo@linaro.org> +Date: Wed, 29 Sep 2021 11:42:51 +0800 +Subject: [PATCH] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes + +IPQ8074 PCIe PHY nodes are broken in the many ways: + +- '#address-cells', '#size-cells' and 'ranges' are missing. +- Child phy/lane node is missing, and the child properties like + '#phy-cells' and 'clocks' are mistakenly put into parent node. +- The clocks properties for parent node are missing. + +Fix them to get the nodes comply with the bindings schema. + +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 46 +++++++++++++++++++++------ + 1 file changed, 36 insertions(+), 10 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -174,34 +174,60 @@ + status = "disabled"; + }; + +- pcie_phy0: phy@86000 { ++ pcie_qmp0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x00086000 0x1000>; +- #phy-cells = <0>; +- clocks = <&gcc GCC_PCIE0_PIPE_CLK>; +- clock-names = "pipe_clk"; +- clock-output-names = "pcie20_phy0_pipe_clk"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; + ++ clocks = <&gcc GCC_PCIE0_AUX_CLK>, ++ <&gcc GCC_PCIE0_AHB_CLK>; ++ clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; ++ ++ pcie_phy0: phy@86200 { ++ reg = <0x86200 0x16c>, ++ <0x86400 0x200>, ++ <0x86800 0x4f4>; ++ #phy-cells = <0>; ++ #clock-cells = <0>; ++ clocks = <&gcc GCC_PCIE0_PIPE_CLK>; ++ clock-names = "pipe0"; ++ clock-output-names = "pcie_0_pipe_clk"; ++ }; + }; + +- pcie_phy1: phy@8e000 { ++ pcie_qmp1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x0008e000 0x1000>; +- #phy-cells = <0>; +- clocks = <&gcc GCC_PCIE1_PIPE_CLK>; +- clock-names = "pipe_clk"; +- clock-output-names = "pcie20_phy1_pipe_clk"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; + ++ clocks = <&gcc GCC_PCIE1_AUX_CLK>, ++ <&gcc GCC_PCIE1_AHB_CLK>; ++ clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; ++ ++ pcie_phy1: phy@8e200 { ++ reg = <0x8e200 0x16c>, ++ <0x8e400 0x200>, ++ <0x8e800 0x4f4>; ++ #phy-cells = <0>; ++ #clock-cells = <0>; ++ clocks = <&gcc GCC_PCIE1_PIPE_CLK>; ++ clock-names = "pipe0"; ++ clock-output-names = "pcie_1_pipe_clk"; ++ }; + }; + + prng: rng@e3000 { diff --git a/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch b/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch new file mode 100644 index 0000000000..30f09db23a --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch @@ -0,0 +1,36 @@ +From 036e332e29ee24396ad877cc6a1275d86a1c4b3d Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Thu, 7 Oct 2021 13:58:46 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add MDIO bus + +IPQ8074 uses an IPQ4019 compatible MDIO controller that is already +supported in the kernel, so add the DT node in order to use it. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20211007115846.26255-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -230,6 +230,18 @@ + }; + }; + ++ mdio: mdio@90000 { ++ compatible = "qcom,ipq4019-mdio"; ++ reg = <0x00090000 0x64>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ clocks = <&gcc GCC_MDIO_AHB_CLK>; ++ clock-names = "gcc_mdio_ahb_clk"; ++ ++ status = "disabled"; ++ }; ++ + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; diff --git a/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch b/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch new file mode 100644 index 0000000000..df8edfc8d9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch @@ -0,0 +1,51 @@ +From 29e135cf87900ac1da457bb27e98e30ca7f723ea Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Thu, 6 Jan 2022 22:25:12 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add SMEM support + +IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already +supported by the kernel add the required DT nodes. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -76,6 +76,20 @@ + method = "smc"; + }; + ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ smem@4ab00000 { ++ compatible = "qcom,smem"; ++ reg = <0x0 0x4ab00000 0x0 0x00100000>; ++ no-map; ++ ++ hwlocks = <&tcsr_mutex 0>; ++ }; ++ }; ++ + firmware { + scm { + compatible = "qcom,scm-ipq8074", "qcom,scm"; +@@ -331,6 +345,12 @@ + #reset-cells = <0x1>; + }; + ++ tcsr_mutex: hwlock@1905000 { ++ compatible = "qcom,tcsr-mutex"; ++ reg = <0x01905000 0x20000>; ++ #hwlock-cells = <1>; ++ }; ++ + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, diff --git a/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch b/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch new file mode 100644 index 0000000000..6b0db7092d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch @@ -0,0 +1,30 @@ +From 0f1cdeea7f237de21f244c06f2c102f93dbd9c4e Mon Sep 17 00:00:00 2001 +From: Kathiravan T <quic_kathirav@quicinc.com> +Date: Fri, 7 Jan 2022 18:24:38 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add the reserved-memory node + +On IPQ8074, 4MB of memory is needed for TZ. So mark that region +as reserved. + +Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> +[bjorn: Squash with existing reserved-memory node] +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -88,6 +88,11 @@ + + hwlocks = <&tcsr_mutex 0>; + }; ++ ++ memory@4ac00000 { ++ no-map; ++ reg = <0x0 0x4ac00000 0x0 0x00400000>; ++ }; + }; + + firmware { diff --git a/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch b/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch new file mode 100644 index 0000000000..6c4bf78fab --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch @@ -0,0 +1,36 @@ +From a505f23abf0c31f40a2c3070d82e961b7c045664 Mon Sep 17 00:00:00 2001 +From: Kathiravan T <quic_kathirav@quicinc.com> +Date: Tue, 8 Feb 2022 21:05:24 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: enable the GICv2m support + +GIC used in the IPQ8074 SoCs has one instance of the GICv2m extension, +which supports upto 32 MSI interrupts. Lets add support for the same. + +Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/1644334525-11577-2-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -634,9 +634,18 @@ + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; ++ #address-cells = <1>; ++ #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ++ ranges = <0 0xb00a000 0xffd>; ++ ++ v2m@0 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x0 0xffd>; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch b/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch new file mode 100644 index 0000000000..09236e3c8c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch @@ -0,0 +1,25 @@ +From 2a73fa24be1d5a263062696f55dcc90725f9159c Mon Sep 17 00:00:00 2001 +From: Kathiravan T <quic_kathirav@quicinc.com> +Date: Wed, 2 Feb 2022 22:05:08 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: drop the clock-frequency property + +Drop the clock-frequency property from the MMIO timer node, since it +is already configured by the bootloader. + +Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/1643819709-5410-2-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -670,7 +670,6 @@ + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; +- clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; diff --git a/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch b/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch new file mode 100644 index 0000000000..d7d31cae89 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch @@ -0,0 +1,61 @@ +From 6f39b05b13e7be39919fd8d235bb0e63ecabf190 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Tue, 5 Apr 2022 08:34:43 +0200 +Subject: [PATCH] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema + +The DT schema expects dma channels in tx-rx order. No functional +change. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220405063451.12011-2-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -471,8 +471,8 @@ + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; +- dmas = <&blsp_dma 15>, <&blsp_dma 14>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 14>, <&blsp_dma 15>; ++ dma-names = "tx", "rx"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "disabled"; +@@ -488,8 +488,8 @@ + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; +- dmas = <&blsp_dma 17>, <&blsp_dma 16>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 16>, <&blsp_dma 17>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + +@@ -503,8 +503,8 @@ + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; +- dmas = <&blsp_dma 21>, <&blsp_dma 20>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 20>, <&blsp_dma 21>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + +@@ -518,8 +518,8 @@ + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; +- dmas = <&blsp_dma 23>, <&blsp_dma 22>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 22>, <&blsp_dma 23>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch new file mode 100644 index 0000000000..8270120925 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch @@ -0,0 +1,68 @@ +From 61d4a1751cfe5a22e5f18478fe16ffb1ee12607d Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Tue, 5 Apr 2022 08:34:44 +0200 +Subject: [PATCH] arm64: dts: qcom: align clocks in I2C/SPI with DT schema + +The DT schema expects clocks core-iface order. No functional change. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220405063451.12011-3-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++------------ + 1 file changed, 12 insertions(+), 12 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -467,9 +467,9 @@ + #size-cells = <0>; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; +@@ -484,9 +484,9 @@ + #size-cells = <0>; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; +@@ -499,9 +499,9 @@ + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; +@@ -514,9 +514,9 @@ + #size-cells = <0>; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; diff --git a/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch b/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch new file mode 100644 index 0000000000..923bffadec --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch @@ -0,0 +1,36 @@ +From ee9002a825695b5dca76f758a9365ca7f7d18265 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Wed, 4 May 2022 15:19:16 +0200 +Subject: [PATCH] arm64: dts: qcom: correct DWC3 node names and unit addresses + +Align DWC3 USB node names with DT schema ("usb" is expected) and correct +the unit addresses to match the "reg" property. This also implies +overriding nodes by label, instead of full path. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Link: https://lore.kernel.org/r/20220504131923.214367-7-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -578,7 +578,7 @@ + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + +- dwc_0: dwc3@8a00000 { ++ dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; +@@ -618,7 +618,7 @@ + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + +- dwc_1: dwc3@8c00000 { ++ dwc_1: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0x8c00000 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; diff --git a/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch b/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch new file mode 100644 index 0000000000..5ec722cf6c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch @@ -0,0 +1,36 @@ +From 71061acf1a9343317e4d34a2c4578ed9301112cc Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Wed, 4 May 2022 15:19:17 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add dedicated qcom,ipq8074-dwc3 + compatible + +Add dedicated compatible for DWC3 USB node name to allow more accurate +DT schema matching. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Link: https://lore.kernel.org/r/20220504131923.214367-8-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -553,7 +553,7 @@ + }; + + usb_0: usb@8af8800 { +- compatible = "qcom,dwc3"; ++ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; +@@ -593,7 +593,7 @@ + }; + + usb_1: usb@8cf8800 { +- compatible = "qcom,dwc3"; ++ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08cf8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch new file mode 100644 index 0000000000..cc4c348233 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch @@ -0,0 +1,39 @@ +From 159cbe595c1018a0172c637374ec69af643fa9f5 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Wed, 4 May 2022 15:19:22 +0200 +Subject: [PATCH] arm64: dts: qcom: align DWC3 USB clocks with DT schema + +Align order of clocks and their names with Qualcomm DWC3 USB DT schema. +No functional impact expected. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Link: https://lore.kernel.org/r/20220504131923.214367-13-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -563,8 +563,8 @@ + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; +- clock-names = "sys_noc_axi", +- "master", ++ clock-names = "cfg_noc", ++ "core", + "sleep", + "mock_utmi"; + +@@ -603,8 +603,8 @@ + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; +- clock-names = "sys_noc_axi", +- "master", ++ clock-names = "cfg_noc", ++ "core", + "sleep", + "mock_utmi"; + diff --git a/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch b/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch new file mode 100644 index 0000000000..515582da5c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch @@ -0,0 +1,36 @@ +From a9f7dc27469ca9588d7aa572bdfdfd5f0f1aab6a Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Thu, 26 May 2022 22:42:47 +0200 +Subject: [PATCH] arm64: dts: qcom: adjust whitespace around '=' + +Fix whitespace coding style: use single space instead of tabs or +multiple spaces around '=' sign in property assignment. No functional +changes (same DTB). + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -119,7 +119,7 @@ + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + +- resets = <&gcc GCC_USB1_PHY_BCR>, ++ resets = <&gcc GCC_USB1_PHY_BCR>, + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; +@@ -162,7 +162,7 @@ + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + +- resets = <&gcc GCC_USB0_PHY_BCR>, ++ resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; diff --git a/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch b/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch new file mode 100644 index 0000000000..529f6715f2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch @@ -0,0 +1,34 @@ +From 2e9703ffe97a1c447c0d00c061526fbeeade6107 Mon Sep 17 00:00:00 2001 +From: Bhupesh Sharma <bhupesh.sharma@linaro.org> +Date: Sun, 15 May 2022 03:24:19 +0530 +Subject: [PATCH] arm64: dts: qcom: Fix sdhci node names - use 'mmc@' + +Since the Qualcomm sdhci-msm device-tree binding has been converted +to yaml format, 'make dtbs_check' reports issues with +inconsistent 'sdhci@' convention used for specifying the +sdhci nodes. The generic mmc bindings expect 'mmc@' format +instead. + +Fix the same. + +Cc: Bjorn Andersson <bjorn.andersson@linaro.org> +Cc: Rob Herring <robh@kernel.org> +Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> +[bjorn: Moved non-arm64 changes to separate commit] +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -375,7 +375,7 @@ + cell-index = <0>; + }; + +- sdhc_1: sdhci@7824900 { ++ sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; diff --git a/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch b/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch new file mode 100644 index 0000000000..0fe6b3ab47 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch @@ -0,0 +1,47 @@ +From 18363f691e931abf0e9bdc9b5169fb15aa10224d Mon Sep 17 00:00:00 2001 +From: Bhupesh Sharma <bhupesh.sharma@linaro.org> +Date: Sun, 15 May 2022 03:24:22 +0530 +Subject: [PATCH] arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names' + for sdhci nodes + +Since the Qualcomm sdhci-msm device-tree binding has been converted +to yaml format, 'make dtbs_check' reports a number of issues with +ordering of 'clocks' & 'clock-names' for sdhci nodes: + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:0: 'iface' was expected + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:1: 'core' was expected + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:2: 'xo' was expected + +Fix the same by updating the offending 'dts' files. + +Cc: Bjorn Andersson <bjorn.andersson@linaro.org> +Cc: Rob Herring <robh@kernel.org> +Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -384,10 +384,10 @@ + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + +- clocks = <&xo>, +- <&gcc GCC_SDCC1_AHB_CLK>, +- <&gcc GCC_SDCC1_APPS_CLK>; +- clock-names = "xo", "iface", "core"; ++ clocks = <&gcc GCC_SDCC1_AHB_CLK>, ++ <&gcc GCC_SDCC1_APPS_CLK>, ++ <&xo>; ++ clock-names = "iface", "core", "xo"; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch new file mode 100644 index 0000000000..f2055d94b1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch @@ -0,0 +1,25 @@ +From aa14b0c11f6442cd489d33c2855941055a3d4fa6 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 15 May 2022 23:00:41 +0200 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add PPE crypto clock + +Add binding for the PPE crypto clock in IPQ8074. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220515210048.483898-4-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -233,6 +233,7 @@ + #define GCC_PCIE0_AXI_S_BRIDGE_CLK 224 + #define GCC_PCIE0_RCHNG_CLK_SRC 225 + #define GCC_PCIE0_RCHNG_CLK 226 ++#define GCC_CRYPTO_PPE_CLK 227 + + #define GCC_BLSP1_BCR 0 + #define GCC_BLSP1_QUP1_BCR 1 diff --git a/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch new file mode 100644 index 0000000000..71fd33331d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch @@ -0,0 +1,52 @@ +From f91d0e8bd6c1f812bc2589050c05a90ee886c749 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 15 May 2022 23:00:42 +0200 +Subject: [PATCH] clk: qcom: ipq8074: add PPE crypto clock + +The built-in PPE engine has a dedicated clock for the EIP-197 crypto +engine. + +So, since the required clock currently missing add support for it. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -3183,6 +3183,24 @@ static struct clk_branch gcc_nss_ptp_ref + }, + }; + ++static struct clk_branch gcc_crypto_ppe_clk = { ++ .halt_reg = 0x68310, ++ .halt_bit = 31, ++ .clkr = { ++ .enable_reg = 0x68310, ++ .enable_mask = BIT(0), ++ .hw.init = &(struct clk_init_data){ ++ .name = "gcc_crypto_ppe_clk", ++ .parent_names = (const char *[]){ ++ "nss_ppe_clk_src" ++ }, ++ .num_parents = 1, ++ .flags = CLK_SET_RATE_PARENT, ++ .ops = &clk_branch2_ops, ++ }, ++ }, ++}; ++ + static struct clk_branch gcc_nssnoc_ce_apb_clk = { + .halt_reg = 0x6830c, + .clkr = { +@@ -4655,6 +4673,7 @@ static struct clk_regmap *gcc_ipq8074_cl + [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr, + [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr, ++ [GCC_CRYPTO_PPE_CLK] = &gcc_crypto_ppe_clk.clkr, + }; + + static const struct qcom_reset_map gcc_ipq8074_resets[] = { diff --git a/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch new file mode 100644 index 0000000000..908ed233b2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch @@ -0,0 +1,25 @@ +From f5441c669d5442d247c69bab3eb27c074c0dd19a Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 15 May 2022 23:00:45 +0200 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add USB GDSCs + +Add bindings for the USB GDSCs found in IPQ8074 GCC. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -368,4 +368,7 @@ + #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 + #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 + ++#define USB0_GDSC 0 ++#define USB1_GDSC 1 ++ + #endif diff --git a/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch new file mode 100644 index 0000000000..7fcb190578 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch @@ -0,0 +1,79 @@ +From ff35d239b7b64f71d7dd9d0ce887647de2cacfcc Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 15 May 2022 23:00:46 +0200 +Subject: [PATCH] clk: qcom: ipq8074: add USB GDSCs + +Add GDSC-s for each of the two USB controllers built-in the IPQ8074. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com +--- + drivers/clk/qcom/Kconfig | 1 + + drivers/clk/qcom/gcc-ipq8074.c | 24 ++++++++++++++++++++++++ + 2 files changed, 25 insertions(+) + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -166,6 +166,7 @@ config IPQ_LCC_806X + + config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" ++ select QCOM_GDSC + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -22,6 +22,7 @@ + #include "clk-alpha-pll.h" + #include "clk-regmap-divider.h" + #include "clk-regmap-mux.h" ++#include "gdsc.h" + #include "reset.h" + + enum { +@@ -4408,6 +4409,22 @@ static struct clk_branch gcc_pcie0_axi_s + }, + }; + ++static struct gdsc usb0_gdsc = { ++ .gdscr = 0x3e078, ++ .pd = { ++ .name = "usb0_gdsc", ++ }, ++ .pwrsts = PWRSTS_OFF_ON, ++}; ++ ++static struct gdsc usb1_gdsc = { ++ .gdscr = 0x3f078, ++ .pd = { ++ .name = "usb1_gdsc", ++ }, ++ .pwrsts = PWRSTS_OFF_ON, ++}; ++ + static const struct alpha_pll_config ubi32_pll_config = { + .l = 0x4e, + .config_ctl_val = 0x200d4aa8, +@@ -4811,6 +4828,11 @@ static const struct qcom_reset_map gcc_i + [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, + }; + ++static struct gdsc *gcc_ipq8074_gdscs[] = { ++ [USB0_GDSC] = &usb0_gdsc, ++ [USB1_GDSC] = &usb1_gdsc, ++}; ++ + static const struct of_device_id gcc_ipq8074_match_table[] = { + { .compatible = "qcom,gcc-ipq8074" }, + { } +@@ -4833,6 +4855,8 @@ static const struct qcom_cc_desc gcc_ipq + .num_resets = ARRAY_SIZE(gcc_ipq8074_resets), + .clk_hws = gcc_ipq8074_hws, + .num_clk_hws = ARRAY_SIZE(gcc_ipq8074_hws), ++ .gdscs = gcc_ipq8074_gdscs, ++ .num_gdscs = ARRAY_SIZE(gcc_ipq8074_gdscs), + }; + + static int gcc_ipq8074_probe(struct platform_device *pdev) diff --git a/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch b/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch new file mode 100644 index 0000000000..99ff26577d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch @@ -0,0 +1,43 @@ +From 53211e85006ebb9bf7fb4482288639612f3146e7 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 15 May 2022 23:00:48 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add USB power domains + +Add USB power domains provided by GCC GDSCs. +Add the required #power-domain-cells to the GCC as well. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -347,6 +347,7 @@ + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; + #clock-cells = <0x1>; ++ #power-domain-cells = <1>; + #reset-cells = <0x1>; + }; + +@@ -575,6 +576,8 @@ + <133330000>, + <19200000>; + ++ power-domains = <&gcc USB0_GDSC>; ++ + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + +@@ -615,6 +618,8 @@ + <133330000>, + <19200000>; + ++ power-domains = <&gcc USB1_GDSC>; ++ + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + diff --git a/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch b/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch new file mode 100644 index 0000000000..8f3dd35991 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch @@ -0,0 +1,50 @@ +From 85a9cab9b9bb471eae016cdbfabd928585c23cce Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 4 Jul 2022 13:33:18 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: move ARMv8 timer out of SoC node + +The ARM timer is usually considered not part of SoC node, just like +other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning: + +arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'} + From schema: dtschema/schemas/simple-bus.yaml + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +[bjorn: Moved node after "soc" for alphabetical ordering] +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -653,14 +653,6 @@ + }; + }; + +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; +- }; +- + watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0xb017000 0x1000>; +@@ -852,4 +844,12 @@ + status = "disabled"; + }; + }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; ++ }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch b/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch new file mode 100644 index 0000000000..b1a3010bf8 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch @@ -0,0 +1,27 @@ +From 8e6af077ced3931ac18e37f0eb3fc6f1a20b0e4a Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 4 Jul 2022 16:35:54 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add reset to SDHCI + +Add reset to SDHCI controller so it can be reset to avoid timeout issues +after software reset due to bootloader set configuration. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -389,6 +389,7 @@ + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; ++ resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch b/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch new file mode 100644 index 0000000000..f69159a849 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch @@ -0,0 +1,36 @@ +From 0171978734227bdd7813bc6d805f609126e3849e Mon Sep 17 00:00:00 2001 +From: Johan Hovold <johan+linaro@kernel.org> +Date: Tue, 5 Jul 2022 13:40:22 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: drop USB PHY clock index + +The QMP USB PHY provides a single clock so drop the redundant clock +index. + +Signed-off-by: Johan Hovold <johan+linaro@kernel.org> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -130,7 +130,7 @@ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; +- #clock-cells = <1>; ++ #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; +@@ -173,7 +173,7 @@ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; +- #clock-cells = <1>; ++ #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch b/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch new file mode 100644 index 0000000000..e50c66f531 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch @@ -0,0 +1,74 @@ +From a6e1d17fbfd41113bf47345e65953873e717ca63 Mon Sep 17 00:00:00 2001 +From: Shawn Guo <shawn.guo@linaro.org> +Date: Tue, 14 Sep 2021 09:40:48 +0800 +Subject: [PATCH] mailbox: qcom-apcs-ipc: Consolidate msm8994 type apcs_data + +The msm8994 type of apcs_data is defined multiple times with different +SoC name encoded. Consolidate them on msm8994 and remove the data +duplication. + +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> +--- + drivers/mailbox/qcom-apcs-ipc-mailbox.c | 26 +++++-------------------- + 1 file changed, 5 insertions(+), 21 deletions(-) + +--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c ++++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c +@@ -33,10 +33,6 @@ static const struct qcom_apcs_ipc_data i + .offset = 8, .clk_name = "qcom,apss-ipq6018-clk" + }; + +-static const struct qcom_apcs_ipc_data ipq8074_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- + static const struct qcom_apcs_ipc_data msm8916_apcs_data = { + .offset = 8, .clk_name = "qcom-apcs-msm8916-clk" + }; +@@ -49,18 +45,6 @@ static const struct qcom_apcs_ipc_data m + .offset = 16, .clk_name = NULL + }; + +-static const struct qcom_apcs_ipc_data msm8998_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- +-static const struct qcom_apcs_ipc_data sdm660_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- +-static const struct qcom_apcs_ipc_data sm6125_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- + static const struct qcom_apcs_ipc_data apps_shared_apcs_data = { + .offset = 12, .clk_name = NULL + }; +@@ -160,21 +144,21 @@ static int qcom_apcs_ipc_remove(struct p + /* .data is the offset of the ipc register within the global block */ + static const struct of_device_id qcom_apcs_ipc_of_match[] = { + { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, +- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data }, ++ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data }, +- { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data }, ++ { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,sc7180-apss-shared", .data = &apps_shared_apcs_data }, + { .compatible = "qcom,sc8180x-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &sdm660_apcs_data }, ++ { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sdm845-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &sm6125_apcs_data }, ++ { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sm8150-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &sdm660_apcs_data }, ++ { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sdx55-apcs-gcc", .data = &sdx55_apcs_data }, + {} + }; diff --git a/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch b/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch new file mode 100644 index 0000000000..cd1dcf2ba2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch @@ -0,0 +1,30 @@ +From 28e239ecd69a99748181bfdf5d2238ff1a8d0646 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:08:48 +0200 +Subject: [PATCH] mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support + +IPQ8074 has the APSS clock controller utilizing the same register space as +the APCS, so provide access to the APSS utilizing a child device like +IPQ6018. + +IPQ6018 and IPQ8074 use the same controller and driver, so just utilize +IPQ6018 match data for IPQ8074. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> +--- + drivers/mailbox/qcom-apcs-ipc-mailbox.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c ++++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c +@@ -144,7 +144,7 @@ static int qcom_apcs_ipc_remove(struct p + /* .data is the offset of the ipc register within the global block */ + static const struct of_device_id qcom_apcs_ipc_of_match[] = { + { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, +- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, ++ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq6018_apcs_data }, + { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, diff --git a/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch b/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch new file mode 100644 index 0000000000..92414d4319 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch @@ -0,0 +1,37 @@ +From aea90e172420a062197849d7914b2fa032de0228 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Thu, 7 Jul 2022 19:37:33 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add APCS node + +APCS now has support for providing the APSS clocks as the child device +for IPQ8074. + +So, add the required DT node for it as it will later be used as the CPU +clocksource. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +[bjorn: Sorted node based on address] +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -662,6 +662,14 @@ + timeout-sec = <30>; + }; + ++ apcs_glb: mailbox@b111000 { ++ compatible = "qcom,ipq8074-apcs-apps-global"; ++ reg = <0x0b111000 0x6000>; ++ ++ #clock-cells = <1>; ++ #mbox-cells = <1>; ++ }; ++ + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch b/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch new file mode 100644 index 0000000000..8fae8ade75 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch @@ -0,0 +1,54 @@ +From a3f36600fd758173c1ec315684e4ae72c6e85654 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 8 Jul 2022 15:38:45 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add #size/address-cells to DTSI + +Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating +the same properties in board DTS files. + +Remove the mentioned properties from current board DTS files. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 -- + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 3 --- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 +++ + 3 files changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -5,8 +5,6 @@ + #include "ipq8074.dtsi" + + / { +- #address-cells = <0x2>; +- #size-cells = <0x2>; + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; + interrupt-parent = <&intc>; +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -7,9 +7,6 @@ + #include "ipq8074.dtsi" + + / { +- #address-cells = <0x2>; +- #size-cells = <0x2>; +- + interrupt-parent = <&intc>; + + aliases { +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -7,6 +7,9 @@ + #include <dt-bindings/clock/qcom,gcc-ipq8074.h> + + / { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; + diff --git a/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch b/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch new file mode 100644 index 0000000000..27a43c43ea --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch @@ -0,0 +1,50 @@ +From 7d57ca4d56856b7f7b97adda6e97cf5db4dcce93 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 8 Jul 2022 15:38:46 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add interrupt-parent to DTSI + +Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board +DTS file. + +Remove interrupt-parent from existing board DTS files. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 1 - + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 2 -- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 3 files changed, 1 insertion(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -7,7 +7,6 @@ + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; +- interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart5; +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -7,8 +7,6 @@ + #include "ipq8074.dtsi" + + / { +- interrupt-parent = <&intc>; +- + aliases { + serial0 = &blsp1_uart5; + }; +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -12,6 +12,7 @@ + + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; ++ interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep_clk { diff --git a/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch new file mode 100644 index 0000000000..566c26399e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch @@ -0,0 +1,28 @@ +From a19df563230af392f2e84e57d69367f96b4a8c56 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Tue, 12 Jul 2022 16:42:43 +0200 +Subject: [PATCH] arm64: dts: qcom: align SDHCI reg-names with DT schema + +DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, +just like TXT bindings were expecting before the conversion. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Reviewed-by: Douglas Anderson <dianders@chromium.org> +Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220712144245.17417-4-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -383,7 +383,7 @@ + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; +- reg-names = "hc_mem", "core_mem"; ++ reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch b/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch new file mode 100644 index 0000000000..c2a9e02927 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch @@ -0,0 +1,37 @@ +From 8f63346a74c8b3e37ffab2c7a2ddb3c08793dcc2 Mon Sep 17 00:00:00 2001 +From: Johan Hovold <johan+linaro@kernel.org> +Date: Thu, 15 Sep 2022 16:34:30 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size + +The size of the PCIe PHY serdes register region is 0x1c4 and the +corresponding 'reg' property should specifically not include the +adjacent regions that are defined in the child node (e.g. tx and rx). + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Johan Hovold <johan+linaro@kernel.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220915143431.19842-1-johan+linaro@kernel.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -199,7 +199,7 @@ + + pcie_qmp0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x00086000 0x1000>; ++ reg = <0x00086000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -227,7 +227,7 @@ + + pcie_qmp1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x0008e000 0x1000>; ++ reg = <0x0008e000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; diff --git a/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch b/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch new file mode 100644 index 0000000000..2faf82baeb --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch @@ -0,0 +1,70 @@ +From 7bd608426c407a79debea54b2b243950f330c5b8 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:24 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL + config + +Convert the driver to use OF match data for providing the Alpha PLL config +per compatible. +This is required for IPQ8074 support since it uses a different Alpha PLL +config. + +While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make +it clear that it is for IPQ6018 only. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 12 +++++++++--- + 1 file changed, 9 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -2,6 +2,7 @@ + // Copyright (c) 2018, The Linux Foundation. All rights reserved. + #include <linux/clk-provider.h> + #include <linux/module.h> ++#include <linux/of_device.h> + #include <linux/platform_device.h> + #include <linux/regmap.h> + +@@ -36,7 +37,7 @@ static struct clk_alpha_pll ipq_pll = { + }, + }; + +-static const struct alpha_pll_config ipq_pll_config = { ++static const struct alpha_pll_config ipq6018_pll_config = { + .l = 0x37, + .config_ctl_val = 0x04141200, + .config_ctl_hi_val = 0x0, +@@ -54,6 +55,7 @@ static const struct regmap_config ipq_pl + + static int apss_ipq_pll_probe(struct platform_device *pdev) + { ++ const struct alpha_pll_config *ipq_pll_config; + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; +@@ -67,7 +69,11 @@ static int apss_ipq_pll_probe(struct pla + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + +- clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config); ++ ipq_pll_config = of_device_get_match_data(&pdev->dev); ++ if (!ipq_pll_config) ++ return -ENODEV; ++ ++ clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config); + + ret = devm_clk_register_regmap(dev, &ipq_pll.clkr); + if (ret) +@@ -78,7 +84,7 @@ static int apss_ipq_pll_probe(struct pla + } + + static const struct of_device_id apss_ipq_pll_match_table[] = { +- { .compatible = "qcom,ipq6018-a53pll" }, ++ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, + { } + }; + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch b/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch new file mode 100644 index 0000000000..4e1bb8aff2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch @@ -0,0 +1,40 @@ +From d22c8f1bd94602d1bf2b377c3befe54e749b963d Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:25 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config + +Update the IPQ6018 Alpha PLL config to the latest one from the downstream +5.4 kernel[1]. + +This one should match the production SoC-s. + +Tested on IPQ6018 CP01-C1 reference board. + +[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.1.r4/drivers/clk/qcom/apss-ipq-pll.c#L41 + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-6-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -39,10 +39,14 @@ static struct clk_alpha_pll ipq_pll = { + + static const struct alpha_pll_config ipq6018_pll_config = { + .l = 0x37, +- .config_ctl_val = 0x04141200, +- .config_ctl_hi_val = 0x0, ++ .config_ctl_val = 0x240d4828, ++ .config_ctl_hi_val = 0x6, + .early_output_mask = BIT(3), ++ .aux2_output_mask = BIT(2), ++ .aux_output_mask = BIT(1), + .main_output_mask = BIT(0), ++ .test_ctl_val = 0x1c0000C0, ++ .test_ctl_hi_val = 0x4000, + }; + + static const struct regmap_config ipq_pll_regmap_config = { diff --git a/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch new file mode 100644 index 0000000000..f5f18acb1b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch @@ -0,0 +1,47 @@ +From e0a711bd88ba98f6ab5118d248ec84fcf495d313 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:26 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: add support for IPQ8074 + +Add support for IPQ8074 since it uses the same PLL setup, however it uses +slightly different Alpha PLL config. + +Alpha PLL config was obtained by dumping PLL registers from a running +device. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq + .test_ctl_hi_val = 0x4000, + }; + ++static const struct alpha_pll_config ipq8074_pll_config = { ++ .l = 0x48, ++ .config_ctl_val = 0x200d4828, ++ .config_ctl_hi_val = 0x6, ++ .early_output_mask = BIT(3), ++ .aux2_output_mask = BIT(2), ++ .aux_output_mask = BIT(1), ++ .main_output_mask = BIT(0), ++ .test_ctl_val = 0x1c000000, ++ .test_ctl_hi_val = 0x4000, ++}; ++ + static const struct regmap_config ipq_pll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, +@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct pla + + static const struct of_device_id apss_ipq_pll_match_table[] = { + { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, ++ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config }, + { } + }; + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch b/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch new file mode 100644 index 0000000000..451066099d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch @@ -0,0 +1,51 @@ +From f7fb35d540240889a8f45f3fd42363cbc1a448e2 Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Fri, 19 Aug 2022 00:06:20 +0200 +Subject: [PATCH] clk: qcom: clk-rcg2: add rcg2 mux ops + +An RCG may act as a mux that switch between 2 parents. +This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds +the CPU cluster clock just switches between XO and the PLL that feeds it. + +Add the required ops to add support for this special configuration and use +the generic mux function to determine the rate. + +This way we dont have to keep a essentially dummy frequency table to use +RCG2 as a mux. + +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com +--- + drivers/clk/qcom/clk-rcg.h | 1 + + drivers/clk/qcom/clk-rcg2.c | 7 +++++++ + 2 files changed, 8 insertions(+) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -164,6 +164,7 @@ struct clk_rcg2_gfx3d { + + extern const struct clk_ops clk_rcg2_ops; + extern const struct clk_ops clk_rcg2_floor_ops; ++extern const struct clk_ops clk_rcg2_mux_closest_ops; + extern const struct clk_ops clk_edp_pixel_ops; + extern const struct clk_ops clk_byte_ops; + extern const struct clk_ops clk_byte2_ops; +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -477,6 +477,13 @@ const struct clk_ops clk_rcg2_floor_ops + }; + EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops); + ++const struct clk_ops clk_rcg2_mux_closest_ops = { ++ .determine_rate = __clk_mux_determine_rate_closest, ++ .get_parent = clk_rcg2_get_parent, ++ .set_parent = clk_rcg2_set_parent, ++}; ++EXPORT_SYMBOL_GPL(clk_rcg2_mux_closest_ops); ++ + struct frac_entry { + int num; + int den; diff --git a/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch b/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch new file mode 100644 index 0000000000..c279e2804e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch @@ -0,0 +1,63 @@ +From 6b9d5ecd2913758780a0529f9b95392f330b721b Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:21 +0200 +Subject: [PATCH] clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src + +While working on IPQ8074 APSS driver it was discovered that IPQ6018 and +IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is +currently broken. + +More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux +clock. +However after debugging why it was always stuck at 800Mhz, it was figured +out that its not regmap_mux compatible at all. +It is a simple mux but it uses RCG2 register layout and control bits, so +utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not +having to provide a dummy frequency table. + +While we are here, use ARRAY_SIZE for number of parents. + +Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards. + +Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq6018.c | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq6018.c ++++ b/drivers/clk/qcom/apss-ipq6018.c +@@ -16,7 +16,7 @@ + #include "clk-regmap.h" + #include "clk-branch.h" + #include "clk-alpha-pll.h" +-#include "clk-regmap-mux.h" ++#include "clk-rcg.h" + + enum { + P_XO, +@@ -33,16 +33,15 @@ static const struct parent_map parents_a + { P_APSS_PLL_EARLY, 5 }, + }; + +-static struct clk_regmap_mux apcs_alias0_clk_src = { +- .reg = 0x0050, +- .width = 3, +- .shift = 7, ++static struct clk_rcg2 apcs_alias0_clk_src = { ++ .cmd_rcgr = 0x0050, ++ .hid_width = 5, + .parent_map = parents_apcs_alias0_clk_src_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apcs_alias0_clk_src", + .parent_data = parents_apcs_alias0_clk_src, +- .num_parents = 2, +- .ops = &clk_regmap_mux_closest_ops, ++ .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src), ++ .ops = &clk_rcg2_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }; diff --git a/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch b/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch new file mode 100644 index 0000000000..ab9bd5f589 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch @@ -0,0 +1,32 @@ +From 6463c10bfdbd684ec7ecfd408ea541283215a088 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:28 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add A53 PLL node + +Add the required node for A53 PLL which will be used to provide the CPU +clock via APCS for APSS scaling. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-9-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -674,6 +674,14 @@ + #mbox-cells = <1>; + }; + ++ a53pll: clock@b116000 { ++ compatible = "qcom,ipq8074-a53pll"; ++ reg = <0x0b116000 0x40>; ++ #clock-cells = <0>; ++ clocks = <&xo>; ++ clock-names = "xo"; ++ }; ++ + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch b/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch new file mode 100644 index 0000000000..f06e456a2c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch @@ -0,0 +1,32 @@ +From 23c5ff3143ce43a76eebdf60a93436de9db39a7a Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:06:27 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct APCS register space size + +APCS DTS addition that was merged, was not supposed to get merged as it +was part of patch series that was superseded by 2 more patch series +that resolved issues with this one and greatly simplified things. + +Since it already got merged, start by correcting the register space +size as APCS will not be providing regmap for PLL and it will conflict +with the standalone A53 PLL node. + +Fixes: 50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node") +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -668,7 +668,7 @@ + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; +- reg = <0x0b111000 0x6000>; ++ reg = <0x0b111000 0x1000>; + + #clock-cells = <1>; + #mbox-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch b/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch new file mode 100644 index 0000000000..63b4cf176b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch @@ -0,0 +1,134 @@ +From e593e834fe8ba9bf314d8215ac05d8787f81efda Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:02:42 +0200 +Subject: [PATCH] thermal/drivers/tsens: Add support for combined interrupt + +Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for +signaling both up/low and critical trips. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com +Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> +--- + drivers/thermal/qcom/tsens-8960.c | 1 + + drivers/thermal/qcom/tsens-v0_1.c | 1 + + drivers/thermal/qcom/tsens-v1.c | 1 + + drivers/thermal/qcom/tsens-v2.c | 1 + + drivers/thermal/qcom/tsens.c | 38 ++++++++++++++++++++++++++----- + drivers/thermal/qcom/tsens.h | 2 ++ + 6 files changed, 38 insertions(+), 6 deletions(-) + +--- a/drivers/thermal/qcom/tsens-8960.c ++++ b/drivers/thermal/qcom/tsens-8960.c +@@ -269,6 +269,7 @@ static const struct tsens_ops ops_8960 = + static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v0_1.c ++++ b/drivers/thermal/qcom/tsens-v0_1.c +@@ -539,6 +539,7 @@ static int calibrate_9607(struct tsens_p + static struct tsens_features tsens_v0_1_feat = { + .ver_major = VER_0_1, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v1.c ++++ b/drivers/thermal/qcom/tsens-v1.c +@@ -302,6 +302,7 @@ static int calibrate_8976(struct tsens_p + static struct tsens_features tsens_v1_feat = { + .ver_major = VER_1_X, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -31,6 +31,7 @@ + static struct tsens_features tsens_v2_feat = { + .ver_major = VER_2_X, + .crit_int = 1, ++ .combo_int = 0, + .adc = 0, + .srot_split = 1, + .max_sensors = 16, +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -531,6 +531,27 @@ static irqreturn_t tsens_irq_thread(int + return IRQ_HANDLED; + } + ++/** ++ * tsens_combined_irq_thread() - Threaded interrupt handler for combined interrupts ++ * @irq: irq number ++ * @data: tsens controller private data ++ * ++ * Handle the combined interrupt as if it were 2 separate interrupts, so call the ++ * critical handler first and then the up/low one. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t tsens_combined_irq_thread(int irq, void *data) ++{ ++ irqreturn_t ret; ++ ++ ret = tsens_critical_irq_thread(irq, data); ++ if (ret != IRQ_HANDLED) ++ return ret; ++ ++ return tsens_irq_thread(irq, data); ++} ++ + static int tsens_set_trips(void *_sensor, int low, int high) + { + struct tsens_sensor *s = _sensor; +@@ -1075,13 +1096,18 @@ static int tsens_register(struct tsens_p + tsens_mC_to_hw(priv->sensor, 0)); + } + +- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); +- if (ret < 0) +- return ret; ++ if (priv->feat->combo_int) { ++ ret = tsens_register_irq(priv, "combined", ++ tsens_combined_irq_thread); ++ } else { ++ ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); ++ if (ret < 0) ++ return ret; + +- if (priv->feat->crit_int) +- ret = tsens_register_irq(priv, "critical", +- tsens_critical_irq_thread); ++ if (priv->feat->crit_int) ++ ret = tsens_register_irq(priv, "critical", ++ tsens_critical_irq_thread); ++ } + + return ret; + } +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -495,6 +495,7 @@ enum regfield_ids { + * struct tsens_features - Features supported by the IP + * @ver_major: Major number of IP version + * @crit_int: does the IP support critical interrupts? ++ * @combo_int: does the IP use one IRQ for up, low and critical thresholds? + * @adc: do the sensors only output adc code (instead of temperature)? + * @srot_split: does the IP neatly splits the register space into SROT and TM, + * with SROT only being available to secure boot firmware? +@@ -504,6 +505,7 @@ enum regfield_ids { + struct tsens_features { + unsigned int ver_major; + unsigned int crit_int:1; ++ unsigned int combo_int:1; + unsigned int adc:1; + unsigned int srot_split:1; + unsigned int has_watchdog:1; diff --git a/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch b/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch new file mode 100644 index 0000000000..7354d54464 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch @@ -0,0 +1,101 @@ +From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:02:43 +0200 +Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips + +IPQ8074 and IPQ6018 dont support negative trip temperatures and support +up to 204 degrees C as the max trip temperature. + +So, instead of always setting the -40 as min and 120 degrees C as max +allow it to be configured as part of the features. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com +Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> +--- + drivers/thermal/qcom/tsens-8960.c | 2 ++ + drivers/thermal/qcom/tsens-v0_1.c | 2 ++ + drivers/thermal/qcom/tsens-v1.c | 2 ++ + drivers/thermal/qcom/tsens-v2.c | 2 ++ + drivers/thermal/qcom/tsens.c | 4 ++-- + drivers/thermal/qcom/tsens.h | 4 ++++ + 6 files changed, 14 insertions(+), 2 deletions(-) + +--- a/drivers/thermal/qcom/tsens-8960.c ++++ b/drivers/thermal/qcom/tsens-8960.c +@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_ + .adc = 1, + .srot_split = 0, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + struct tsens_plat_data data_8960 = { +--- a/drivers/thermal/qcom/tsens-v0_1.c ++++ b/drivers/thermal/qcom/tsens-v0_1.c +@@ -543,6 +543,8 @@ static struct tsens_features tsens_v0_1_ + .adc = 1, + .srot_split = 1, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens-v1.c ++++ b/drivers/thermal/qcom/tsens-v1.c +@@ -306,6 +306,8 @@ static struct tsens_features tsens_v1_fe + .adc = 1, + .srot_split = 1, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe + .adc = 0, + .srot_split = 1, + .max_sensors = 16, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -572,8 +572,8 @@ static int tsens_set_trips(void *_sensor + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + +- cl_high = clamp_val(high, -40000, 120000); +- cl_low = clamp_val(low, -40000, 120000); ++ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp); ++ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -501,6 +501,8 @@ enum regfield_ids { + * with SROT only being available to secure boot firmware? + * @has_watchdog: does this IP support watchdog functionality? + * @max_sensors: maximum sensors supported by this version of the IP ++ * @trip_min_temp: minimum trip temperature supported by this version of the IP ++ * @trip_max_temp: maximum trip temperature supported by this version of the IP + */ + struct tsens_features { + unsigned int ver_major; +@@ -510,6 +512,8 @@ struct tsens_features { + unsigned int srot_split:1; + unsigned int has_watchdog:1; + unsigned int max_sensors; ++ int trip_min_temp; ++ int trip_max_temp; + }; + + /** diff --git a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch new file mode 100644 index 0000000000..89e21c0194 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch @@ -0,0 +1,74 @@ +From 0164d794cbc58488a7321272e95958d10cf103a4 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:02:44 +0200 +Subject: [PATCH] thermal/drivers/tsens: Add IPQ8074 support + +Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP +it only has one IRQ, that is used for up/low as well as critical. +It also does not support negative trip temperatures. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com +Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> +--- + drivers/thermal/qcom/tsens-v2.c | 17 +++++++++++++++++ + drivers/thermal/qcom/tsens.c | 3 +++ + drivers/thermal/qcom/tsens.h | 2 +- + 3 files changed, 21 insertions(+), 1 deletion(-) + +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -39,6 +39,17 @@ static struct tsens_features tsens_v2_fe + .trip_max_temp = 120000, + }; + ++static struct tsens_features ipq8074_feat = { ++ .ver_major = VER_2_X, ++ .crit_int = 1, ++ .combo_int = 1, ++ .adc = 0, ++ .srot_split = 1, ++ .max_sensors = 16, ++ .trip_min_temp = 0, ++ .trip_max_temp = 204000, ++}; ++ + static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ +@@ -104,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = { + .fields = tsens_v2_regfields, + }; + ++struct tsens_plat_data data_ipq8074 = { ++ .ops = &ops_generic_v2, ++ .feat = &ipq8074_feat, ++ .fields = tsens_v2_regfields, ++}; ++ + /* Kept around for backward compatibility with old msm8996.dtsi */ + struct tsens_plat_data data_8996 = { + .num_sensors = 13, +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -991,6 +991,9 @@ static const struct of_device_id tsens_t + .compatible = "qcom,ipq8064-tsens", + .data = &data_8960, + }, { ++ .compatible = "qcom,ipq8074-tsens", ++ .data = &data_ipq8074, ++ }, { + .compatible = "qcom,mdm9607-tsens", + .data = &data_9607, + }, { +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -599,6 +599,6 @@ extern struct tsens_plat_data data_8916, + extern struct tsens_plat_data data_tsens_v1, data_8976; + + /* TSENS v2 targets */ +-extern struct tsens_plat_data data_8996, data_tsens_v2; ++extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2; + + #endif /* __QCOM_TSENS_H__ */ diff --git a/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch new file mode 100644 index 0000000000..c142acf63f --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch @@ -0,0 +1,130 @@ +From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:02:45 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes + +IPQ8074 has a tsens v2.3.0 peripheral which monitors +temperatures around the various subsystems on the +die. + +So lets add the tsens and thermal zone nodes, passive +CPU cooling will come in later patches after CPU frequency +scaling is supported. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++ + 1 file changed, 96 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -273,6 +273,16 @@ + status = "disabled"; + }; + ++ tsens: thermal-sensor@4a9000 { ++ compatible = "qcom,ipq8074-tsens"; ++ reg = <0x4a9000 0x1000>, /* TM */ ++ <0x4a8000 0x1000>; /* SROT */ ++ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "combined"; ++ #qcom,sensors = <16>; ++ #thermal-sensor-cells = <1>; ++ }; ++ + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; +@@ -873,4 +883,90 @@ + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; ++ ++ thermal-zones { ++ nss-top-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 4>; ++ }; ++ ++ nss0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 5>; ++ }; ++ ++ nss1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 6>; ++ }; ++ ++ wcss-phya0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 7>; ++ }; ++ ++ wcss-phya1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 8>; ++ }; ++ ++ cpu0_thermal: cpu0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 9>; ++ }; ++ ++ cpu1_thermal: cpu1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 10>; ++ }; ++ ++ cpu2_thermal: cpu2-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 11>; ++ }; ++ ++ cpu3_thermal: cpu3-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 12>; ++ }; ++ ++ cluster_thermal: cluster-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 13>; ++ }; ++ ++ wcss-phyb0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 14>; ++ }; ++ ++ wcss-phyb1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 15>; ++ }; ++ }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch b/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch new file mode 100644 index 0000000000..ff992378a2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch @@ -0,0 +1,29 @@ +From 0df592a0a1a3fff9133977192677aa915afc174f Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:08:49 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add clocks to APCS + +APCS now has support for providing the APSS clocks as the child device +for IPQ8074. + +So, add the A53 PLL and XO clocks in order to use APCS as the CPU +clocksource for APSS scaling. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -679,6 +679,8 @@ + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0x1000>; ++ clocks = <&a53pll>, <&xo>; ++ clock-names = "pll", "xo"; + + #clock-cells = <1>; + #mbox-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch b/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch new file mode 100644 index 0000000000..9162ea538d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch @@ -0,0 +1,3601 @@ +From e6c5115d6845f25eda7e162dcd783a2044215867 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 30 Oct 2022 18:57:01 +0100 +Subject: [PATCH] clk: qcom: ipq8074: convert to parent data + +Convert the IPQ8074 GCC driver to use parent data instead of global +name matching. + +Utilize ARRAY_SIZE for num_parents instead of hardcoding the value. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 1781 +++++++++++++++----------------- + 1 file changed, 813 insertions(+), 968 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -49,349 +49,6 @@ enum { + P_UNIPHY2_TX, + }; + +-static const char * const gcc_xo_gpll0_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const struct parent_map gcc_xo_gpll0_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll2", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL2, 2 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_sleep_clk[] = { +- "xo", +- "gpll0", +- "sleep_clk", +-}; +- +-static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 2 }, +- { P_SLEEP_CLK, 6 }, +-}; +- +-static const char * const gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { +- "xo", +- "gpll6", +- "gpll0", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL6, 1 }, +- { P_GPLL0, 3 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_out_main_div2_gpll0[] = { +- "xo", +- "gpll0_out_main_div2", +- "gpll0", +-}; +- +-static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { +- { P_XO, 0 }, +- { P_GPLL0_DIV2, 2 }, +- { P_GPLL0, 1 }, +-}; +- +-static const char * const gcc_usb3phy_0_cc_pipe_clk_xo[] = { +- "usb3phy_0_cc_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { +- { P_USB3PHY_0_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_usb3phy_1_cc_pipe_clk_xo[] = { +- "usb3phy_1_cc_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { +- { P_USB3PHY_1_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_pcie20_phy0_pipe_clk_xo[] = { +- "pcie20_phy0_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { +- { P_PCIE20_PHY0_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_pcie20_phy1_pipe_clk_xo[] = { +- "pcie20_phy1_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { +- { P_PCIE20_PHY1_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_div2[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 3 }, +-}; +- +-static const char * const gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { +- "xo", +- "bias_pll_nss_noc_clk", +- "gpll0", +- "gpll2", +-}; +- +-static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { +- { P_XO, 0 }, +- { P_BIAS_PLL_NSS_NOC, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL2, 3 }, +-}; +- +-static const char * const gcc_xo_nss_crypto_pll_gpll0[] = { +- "xo", +- "nss_crypto_pll", +- "gpll0", +-}; +- +-static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { +- { P_XO, 0 }, +- { P_NSS_CRYPTO_PLL, 1 }, +- { P_GPLL0, 2 }, +-}; +- +-static const char * const gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { +- "xo", +- "ubi32_pll", +- "gpll0", +- "gpll2", +- "gpll4", +- "gpll6", +-}; +- +-static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { +- { P_XO, 0 }, +- { P_UBI32_PLL, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL2, 3 }, +- { P_GPLL4, 4 }, +- { P_GPLL6, 5 }, +-}; +- +-static const char * const gcc_xo_gpll0_out_main_div2[] = { +- "xo", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0_DIV2, 1 }, +-}; +- +-static const char * const gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { +- "xo", +- "bias_pll_cc_clk", +- "gpll0", +- "gpll4", +- "nss_crypto_pll", +- "ubi32_pll", +-}; +- +-static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { +- { P_XO, 0 }, +- { P_BIAS_PLL, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL4, 3 }, +- { P_NSS_CRYPTO_PLL, 4 }, +- { P_UBI32_PLL, 5 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll4[] = { +- "xo", +- "gpll0", +- "gpll4", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL4, 2 }, +-}; +- +-static const char * const gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_rx_clk", +- "uniphy0_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_RX, 1 }, +- { P_UNIPHY0_TX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_tx_clk", +- "uniphy0_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_TX, 1 }, +- { P_UNIPHY0_RX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_rx_clk", +- "uniphy0_gcc_tx_clk", +- "uniphy1_gcc_rx_clk", +- "uniphy1_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map +-gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_RX, 1 }, +- { P_UNIPHY0_TX, 2 }, +- { P_UNIPHY1_RX, 3 }, +- { P_UNIPHY1_TX, 4 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_tx_clk", +- "uniphy0_gcc_rx_clk", +- "uniphy1_gcc_tx_clk", +- "uniphy1_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map +-gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_TX, 1 }, +- { P_UNIPHY0_RX, 2 }, +- { P_UNIPHY1_TX, 3 }, +- { P_UNIPHY1_RX, 4 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy2_gcc_rx_clk", +- "uniphy2_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY2_RX, 1 }, +- { P_UNIPHY2_TX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy2_gcc_tx_clk", +- "uniphy2_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY2_TX, 1 }, +- { P_UNIPHY2_RX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +- "sleep_clk", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 4 }, +- { P_SLEEP_CLK, 6 }, +-}; +- + static struct clk_alpha_pll gpll0_main = { + .offset = 0x21000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], +@@ -400,8 +57,9 @@ static struct clk_alpha_pll gpll0_main = + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -414,9 +72,8 @@ static struct clk_fixed_factor gpll0_out + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "gpll0_out_main_div2", +- .parent_names = (const char *[]){ +- "gpll0_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll0_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -429,9 +86,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0", +- .parent_names = (const char *[]){ +- "gpll0_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll0_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + }, +@@ -445,8 +101,9 @@ static struct clk_alpha_pll gpll2_main = + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gpll2_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -461,9 +118,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll2", +- .parent_names = (const char *[]){ +- "gpll2_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll2_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -478,8 +134,9 @@ static struct clk_alpha_pll gpll4_main = + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gpll4_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -494,9 +151,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll4", +- .parent_names = (const char *[]){ +- "gpll4_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll4_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -512,8 +168,9 @@ static struct clk_alpha_pll gpll6_main = + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gpll6_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -528,9 +185,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 2, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll6", +- .parent_names = (const char *[]){ +- "gpll6_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll6_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -542,9 +198,8 @@ static struct clk_fixed_factor gpll6_out + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "gpll6_out_main_div2", +- .parent_names = (const char *[]){ +- "gpll6_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll6_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -560,8 +215,9 @@ static struct clk_alpha_pll ubi32_pll_ma + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "ubi32_pll_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_huayra_ops, +@@ -575,9 +231,8 @@ static struct clk_alpha_pll_postdiv ubi3 + .width = 2, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi32_pll", +- .parent_names = (const char *[]){ +- "ubi32_pll_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi32_pll_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -592,8 +247,9 @@ static struct clk_alpha_pll nss_crypto_p + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "nss_crypto_pll_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -607,9 +263,8 @@ static struct clk_alpha_pll_postdiv nss_ + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_crypto_pll", +- .parent_names = (const char *[]){ +- "nss_crypto_pll_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_pll_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -623,6 +278,18 @@ static const struct freq_tbl ftbl_pcnoc_ + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw}, ++ { .hw = &gpll0_out_main_div2.hw}, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr = 0x27000, + .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, +@@ -630,8 +297,8 @@ static struct clk_rcg2 pcnoc_bfdcd_clk_s + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcnoc_bfdcd_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +@@ -642,9 +309,8 @@ static struct clk_fixed_factor pcnoc_clk + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "pcnoc_clk_src", +- .parent_names = (const char *[]){ +- "pcnoc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -658,8 +324,9 @@ static struct clk_branch gcc_sleep_clk_s + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sleep_clk_src", +- .parent_names = (const char *[]){ +- "sleep_clk" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "sleep_clk", ++ .name = "sleep_clk", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, +@@ -682,8 +349,8 @@ static struct clk_rcg2 blsp1_qup1_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -708,8 +375,8 @@ static struct clk_rcg2 blsp1_qup1_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -721,8 +388,8 @@ static struct clk_rcg2 blsp1_qup2_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -735,8 +402,8 @@ static struct clk_rcg2 blsp1_qup2_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -748,8 +415,8 @@ static struct clk_rcg2 blsp1_qup3_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -762,8 +429,8 @@ static struct clk_rcg2 blsp1_qup3_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -775,8 +442,8 @@ static struct clk_rcg2 blsp1_qup4_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -789,8 +456,8 @@ static struct clk_rcg2 blsp1_qup4_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -802,8 +469,8 @@ static struct clk_rcg2 blsp1_qup5_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -816,8 +483,8 @@ static struct clk_rcg2 blsp1_qup5_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -829,8 +496,8 @@ static struct clk_rcg2 blsp1_qup6_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -843,8 +510,8 @@ static struct clk_rcg2 blsp1_qup6_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -877,8 +544,8 @@ static struct clk_rcg2 blsp1_uart1_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart1_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -891,8 +558,8 @@ static struct clk_rcg2 blsp1_uart2_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart2_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -905,8 +572,8 @@ static struct clk_rcg2 blsp1_uart3_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart3_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -919,8 +586,8 @@ static struct clk_rcg2 blsp1_uart4_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart4_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -933,8 +600,8 @@ static struct clk_rcg2 blsp1_uart5_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart5_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -947,8 +614,8 @@ static struct clk_rcg2 blsp1_uart6_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart6_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -958,6 +625,11 @@ static const struct clk_parent_data gcc_ + { .hw = &gpll0.clkr.hw }, + }; + ++static const struct parent_map gcc_xo_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++}; ++ + static const struct freq_tbl ftbl_pcie_axi_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), +@@ -972,7 +644,7 @@ static struct clk_rcg2 pcie0_axi_clk_src + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_axi_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -981,6 +653,18 @@ static const struct freq_tbl ftbl_pcie_a + F(19200000, P_XO, 1, 0, 0), + }; + ++static const struct clk_parent_data gcc_xo_gpll0_sleep_clk[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .fw_name = "sleep_clk", .name = "sleep_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 2 }, ++ { P_SLEEP_CLK, 6 }, ++}; ++ + static struct clk_rcg2 pcie0_aux_clk_src = { + .cmd_rcgr = 0x75024, + .freq_tbl = ftbl_pcie_aux_clk_src, +@@ -989,12 +673,22 @@ static struct clk_rcg2 pcie0_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { ++ { .name = "pcie20_phy0_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { ++ { P_PCIE20_PHY0_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux pcie0_pipe_clk_src = { + .reg = 0x7501c, + .shift = 8, +@@ -1003,8 +697,8 @@ static struct clk_regmap_mux pcie0_pipe_ + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie0_pipe_clk_src", +- .parent_names = gcc_pcie20_phy0_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_pcie20_phy0_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_pcie20_phy0_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1019,7 +713,7 @@ static struct clk_rcg2 pcie1_axi_clk_src + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_axi_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1032,12 +726,22 @@ static struct clk_rcg2 pcie1_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { ++ { .name = "pcie20_phy1_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { ++ { P_PCIE20_PHY1_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux pcie1_pipe_clk_src = { + .reg = 0x7601c, + .shift = 8, +@@ -1046,8 +750,8 @@ static struct clk_regmap_mux pcie1_pipe_ + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie1_pipe_clk_src", +- .parent_names = gcc_pcie20_phy1_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_pcie20_phy1_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_pcie20_phy1_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1066,6 +770,20 @@ static const struct freq_tbl ftbl_sdcc_a + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL2, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 sdcc1_apps_clk_src = { + .cmd_rcgr = 0x42004, + .freq_tbl = ftbl_sdcc_apps_clk_src, +@@ -1074,8 +792,8 @@ static struct clk_rcg2 sdcc1_apps_clk_sr + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), + .ops = &clk_rcg2_floor_ops, + }, + }; +@@ -1086,6 +804,20 @@ static const struct freq_tbl ftbl_sdcc_i + F(308570000, P_GPLL6, 3.5, 0, 0), + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 sdcc1_ice_core_clk_src = { + .cmd_rcgr = 0x5d000, + .freq_tbl = ftbl_sdcc_ice_core_clk_src, +@@ -1094,8 +826,8 @@ static struct clk_rcg2 sdcc1_ice_core_cl + .parent_map = gcc_xo_gpll0_gpll6_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_ice_core_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1108,8 +840,8 @@ static struct clk_rcg2 sdcc2_apps_clk_sr + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc2_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), + .ops = &clk_rcg2_floor_ops, + }, + }; +@@ -1121,6 +853,18 @@ static const struct freq_tbl ftbl_usb_ma + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0_out_main_div2.hw }, ++ { .hw = &gpll0.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0_DIV2, 2 }, ++ { P_GPLL0, 1 }, ++}; ++ + static struct clk_rcg2 usb0_master_clk_src = { + .cmd_rcgr = 0x3e00c, + .freq_tbl = ftbl_usb_master_clk_src, +@@ -1129,8 +873,8 @@ static struct clk_rcg2 usb0_master_clk_s + .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_master_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1148,8 +892,8 @@ static struct clk_rcg2 usb0_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1161,6 +905,20 @@ static const struct freq_tbl ftbl_usb_mo + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL6, 1 }, ++ { P_GPLL0, 3 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 usb0_mock_utmi_clk_src = { + .cmd_rcgr = 0x3e020, + .freq_tbl = ftbl_usb_mock_utmi_clk_src, +@@ -1169,12 +927,22 @@ static struct clk_rcg2 usb0_mock_utmi_cl + .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_mock_utmi_clk_src", +- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { ++ { .name = "usb3phy_0_cc_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { ++ { P_USB3PHY_0_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux usb0_pipe_clk_src = { + .reg = 0x3e048, + .shift = 8, +@@ -1183,8 +951,8 @@ static struct clk_regmap_mux usb0_pipe_c + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "usb0_pipe_clk_src", +- .parent_names = gcc_usb3phy_0_cc_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_usb3phy_0_cc_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1199,8 +967,8 @@ static struct clk_rcg2 usb1_master_clk_s + .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_master_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1213,8 +981,8 @@ static struct clk_rcg2 usb1_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1227,12 +995,22 @@ static struct clk_rcg2 usb1_mock_utmi_cl + .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_mock_utmi_clk_src", +- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { ++ { .name = "usb3phy_1_cc_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { ++ { P_USB3PHY_1_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux usb1_pipe_clk_src = { + .reg = 0x3f048, + .shift = 8, +@@ -1241,8 +1019,8 @@ static struct clk_regmap_mux usb1_pipe_c + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "usb1_pipe_clk_src", +- .parent_names = gcc_usb3phy_1_cc_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_usb3phy_1_cc_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_usb3phy_1_cc_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1256,8 +1034,9 @@ static struct clk_branch gcc_xo_clk_src + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_clk_src", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, +@@ -1271,9 +1050,8 @@ static struct clk_fixed_factor gcc_xo_di + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_div4_clk_src", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1291,6 +1069,20 @@ static const struct freq_tbl ftbl_system + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 3 }, ++}; ++ + static struct clk_rcg2 system_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x26004, + .freq_tbl = ftbl_system_noc_bfdcd_clk_src, +@@ -1298,8 +1090,8 @@ static struct clk_rcg2 system_noc_bfdcd_ + .parent_map = gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "system_noc_bfdcd_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +@@ -1310,9 +1102,8 @@ static struct clk_fixed_factor system_no + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "system_noc_clk_src", +- .parent_names = (const char *[]){ +- "system_noc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1333,7 +1124,7 @@ static struct clk_rcg2 nss_ce_clk_src = + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ce_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1344,6 +1135,20 @@ static const struct freq_tbl ftbl_nss_no + { } + }; + ++static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "bias_pll_nss_noc_clk" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { ++ { P_XO, 0 }, ++ { P_BIAS_PLL_NSS_NOC, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL2, 3 }, ++}; ++ + static struct clk_rcg2 nss_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x68088, + .freq_tbl = ftbl_nss_noc_bfdcd_clk_src, +@@ -1351,8 +1156,8 @@ static struct clk_rcg2 nss_noc_bfdcd_clk + .parent_map = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_noc_bfdcd_clk_src", +- .parent_names = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, +- .num_parents = 4, ++ .parent_data = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, ++ .num_parents = ARRAY_SIZE(gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1362,9 +1167,8 @@ static struct clk_fixed_factor nss_noc_c + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "nss_noc_clk_src", +- .parent_names = (const char *[]){ +- "nss_noc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1377,6 +1181,18 @@ static const struct freq_tbl ftbl_nss_cr + { } + }; + ++static const struct clk_parent_data gcc_xo_nss_crypto_pll_gpll0[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &nss_crypto_pll.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_NSS_CRYPTO_PLL, 1 }, ++ { P_GPLL0, 2 }, ++}; ++ + static struct clk_rcg2 nss_crypto_clk_src = { + .cmd_rcgr = 0x68144, + .freq_tbl = ftbl_nss_crypto_clk_src, +@@ -1385,8 +1201,8 @@ static struct clk_rcg2 nss_crypto_clk_sr + .parent_map = gcc_xo_nss_crypto_pll_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_crypto_clk_src", +- .parent_names = gcc_xo_nss_crypto_pll_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_nss_crypto_pll_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_nss_crypto_pll_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1400,6 +1216,24 @@ static const struct freq_tbl ftbl_nss_ub + { } + }; + ++static const struct clk_parent_data gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { ++ { P_XO, 0 }, ++ { P_UBI32_PLL, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL2, 3 }, ++ { P_GPLL4, 4 }, ++ { P_GPLL6, 5 }, ++}; ++ + static struct clk_rcg2 nss_ubi0_clk_src = { + .cmd_rcgr = 0x68104, + .freq_tbl = ftbl_nss_ubi_clk_src, +@@ -1407,8 +1241,8 @@ static struct clk_rcg2 nss_ubi0_clk_src + .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ubi0_clk_src", +- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, +- .num_parents = 6, ++ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, ++ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1421,9 +1255,8 @@ static struct clk_regmap_div nss_ubi0_di + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_ubi0_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_ubi0_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi0_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1438,8 +1271,8 @@ static struct clk_rcg2 nss_ubi1_clk_src + .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ubi1_clk_src", +- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, +- .num_parents = 6, ++ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, ++ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1452,9 +1285,8 @@ static struct clk_regmap_div nss_ubi1_di + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_ubi1_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_ubi1_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi1_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1468,6 +1300,16 @@ static const struct freq_tbl ftbl_ubi_mp + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0_DIV2, 1 }, ++}; ++ + static struct clk_rcg2 ubi_mpt_clk_src = { + .cmd_rcgr = 0x68090, + .freq_tbl = ftbl_ubi_mpt_clk_src, +@@ -1475,8 +1317,8 @@ static struct clk_rcg2 ubi_mpt_clk_src = + .parent_map = gcc_xo_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi_mpt_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2, +- .num_parents = 2, ++ .parent_data = gcc_xo_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1487,6 +1329,18 @@ static const struct freq_tbl ftbl_nss_im + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL4, 2 }, ++}; ++ + static struct clk_rcg2 nss_imem_clk_src = { + .cmd_rcgr = 0x68158, + .freq_tbl = ftbl_nss_imem_clk_src, +@@ -1494,8 +1348,8 @@ static struct clk_rcg2 nss_imem_clk_src + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_imem_clk_src", +- .parent_names = gcc_xo_gpll0_gpll4, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll4, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1506,6 +1360,24 @@ static const struct freq_tbl ftbl_nss_pp + { } + }; + ++static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "bias_pll_cc_clk" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++ { .hw = &nss_crypto_pll.clkr.hw }, ++ { .hw = &ubi32_pll.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { ++ { P_XO, 0 }, ++ { P_BIAS_PLL, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL4, 3 }, ++ { P_NSS_CRYPTO_PLL, 4 }, ++ { P_UBI32_PLL, 5 }, ++}; ++ + static struct clk_rcg2 nss_ppe_clk_src = { + .cmd_rcgr = 0x68080, + .freq_tbl = ftbl_nss_ppe_clk_src, +@@ -1513,8 +1385,8 @@ static struct clk_rcg2 nss_ppe_clk_src = + .parent_map = gcc_xo_bias_gpll0_gpll4_nss_ubi32_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ppe_clk_src", +- .parent_names = gcc_xo_bias_gpll0_gpll4_nss_ubi32, +- .num_parents = 6, ++ .parent_data = gcc_xo_bias_gpll0_gpll4_nss_ubi32, ++ .num_parents = ARRAY_SIZE(gcc_xo_bias_gpll0_gpll4_nss_ubi32), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1524,9 +1396,8 @@ static struct clk_fixed_factor nss_ppe_c + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "nss_ppe_cdiv_clk_src", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1540,6 +1411,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_RX, 1 }, ++ { P_UNIPHY0_TX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port1_rx_clk_src = { + .cmd_rcgr = 0x68020, + .freq_tbl = ftbl_nss_port1_rx_clk_src, +@@ -1547,8 +1434,8 @@ static struct clk_rcg2 nss_port1_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port1_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1560,9 +1447,8 @@ static struct clk_regmap_div nss_port1_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port1_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port1_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1577,6 +1463,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_TX, 1 }, ++ { P_UNIPHY0_RX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port1_tx_clk_src = { + .cmd_rcgr = 0x68028, + .freq_tbl = ftbl_nss_port1_tx_clk_src, +@@ -1584,8 +1486,8 @@ static struct clk_rcg2 nss_port1_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port1_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1597,9 +1499,8 @@ static struct clk_regmap_div nss_port1_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port1_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port1_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1614,8 +1515,8 @@ static struct clk_rcg2 nss_port2_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port2_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1627,9 +1528,8 @@ static struct clk_regmap_div nss_port2_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port2_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port2_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1644,8 +1544,8 @@ static struct clk_rcg2 nss_port2_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port2_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1657,9 +1557,8 @@ static struct clk_regmap_div nss_port2_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port2_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port2_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1674,8 +1573,8 @@ static struct clk_rcg2 nss_port3_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port3_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1687,9 +1586,8 @@ static struct clk_regmap_div nss_port3_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port3_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port3_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1704,8 +1602,8 @@ static struct clk_rcg2 nss_port3_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port3_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1717,9 +1615,8 @@ static struct clk_regmap_div nss_port3_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port3_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port3_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1734,8 +1631,8 @@ static struct clk_rcg2 nss_port4_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port4_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1747,9 +1644,8 @@ static struct clk_regmap_div nss_port4_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port4_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port4_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1764,8 +1660,8 @@ static struct clk_rcg2 nss_port4_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port4_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1777,9 +1673,8 @@ static struct clk_regmap_div nss_port4_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port4_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port4_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1799,6 +1694,27 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy1_gcc_rx_clk" }, ++ { .name = "uniphy1_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map ++gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_RX, 1 }, ++ { P_UNIPHY0_TX, 2 }, ++ { P_UNIPHY1_RX, 3 }, ++ { P_UNIPHY1_TX, 4 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port5_rx_clk_src = { + .cmd_rcgr = 0x68060, + .freq_tbl = ftbl_nss_port5_rx_clk_src, +@@ -1806,8 +1722,8 @@ static struct clk_rcg2 nss_port5_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port5_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, +- .num_parents = 7, ++ .parent_data = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1819,9 +1735,8 @@ static struct clk_regmap_div nss_port5_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port5_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port5_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1841,6 +1756,27 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy1_gcc_tx_clk" }, ++ { .name = "uniphy1_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map ++gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_TX, 1 }, ++ { P_UNIPHY0_RX, 2 }, ++ { P_UNIPHY1_TX, 3 }, ++ { P_UNIPHY1_RX, 4 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port5_tx_clk_src = { + .cmd_rcgr = 0x68068, + .freq_tbl = ftbl_nss_port5_tx_clk_src, +@@ -1848,8 +1784,8 @@ static struct clk_rcg2 nss_port5_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port5_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, +- .num_parents = 7, ++ .parent_data = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1861,9 +1797,8 @@ static struct clk_regmap_div nss_port5_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port5_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port5_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1883,6 +1818,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy2_gcc_rx_clk" }, ++ { .name = "uniphy2_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY2_RX, 1 }, ++ { P_UNIPHY2_TX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port6_rx_clk_src = { + .cmd_rcgr = 0x68070, + .freq_tbl = ftbl_nss_port6_rx_clk_src, +@@ -1890,8 +1841,8 @@ static struct clk_rcg2 nss_port6_rx_clk_ + .parent_map = gcc_xo_uniphy2_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port6_rx_clk_src", +- .parent_names = gcc_xo_uniphy2_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy2_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1903,9 +1854,8 @@ static struct clk_regmap_div nss_port6_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port6_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port6_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1925,6 +1875,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy2_gcc_tx_clk" }, ++ { .name = "uniphy2_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY2_TX, 1 }, ++ { P_UNIPHY2_RX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port6_tx_clk_src = { + .cmd_rcgr = 0x68078, + .freq_tbl = ftbl_nss_port6_tx_clk_src, +@@ -1932,8 +1898,8 @@ static struct clk_rcg2 nss_port6_tx_clk_ + .parent_map = gcc_xo_uniphy2_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port6_tx_clk_src", +- .parent_names = gcc_xo_uniphy2_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy2_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1945,9 +1911,8 @@ static struct clk_regmap_div nss_port6_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port6_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port6_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1970,8 +1935,8 @@ static struct clk_rcg2 crypto_clk_src = + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "crypto_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1981,6 +1946,22 @@ static struct freq_tbl ftbl_gp_clk_src[] + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++ { .fw_name = "sleep_clk", .name = "sleep_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++ { P_SLEEP_CLK, 6 }, ++}; ++ + static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr = 0x08004, + .freq_tbl = ftbl_gp_clk_src, +@@ -1989,8 +1970,8 @@ static struct clk_rcg2 gp1_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp1_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2003,8 +1984,8 @@ static struct clk_rcg2 gp2_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp2_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2017,8 +1998,8 @@ static struct clk_rcg2 gp3_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp3_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2030,9 +2011,8 @@ static struct clk_branch gcc_blsp1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2047,9 +2027,8 @@ static struct clk_branch gcc_blsp1_qup1_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup1_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup1_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2064,9 +2043,8 @@ static struct clk_branch gcc_blsp1_qup1_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup1_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup1_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2081,9 +2059,8 @@ static struct clk_branch gcc_blsp1_qup2_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup2_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup2_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2098,9 +2075,8 @@ static struct clk_branch gcc_blsp1_qup2_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup2_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup2_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2115,9 +2091,8 @@ static struct clk_branch gcc_blsp1_qup3_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup3_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup3_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2132,9 +2107,8 @@ static struct clk_branch gcc_blsp1_qup3_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup3_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup3_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2149,9 +2123,8 @@ static struct clk_branch gcc_blsp1_qup4_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup4_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup4_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2166,9 +2139,8 @@ static struct clk_branch gcc_blsp1_qup4_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup4_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup4_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2183,9 +2155,8 @@ static struct clk_branch gcc_blsp1_qup5_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup5_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup5_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2200,9 +2171,8 @@ static struct clk_branch gcc_blsp1_qup5_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup5_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup5_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2217,9 +2187,8 @@ static struct clk_branch gcc_blsp1_qup6_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup6_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2234,9 +2203,8 @@ static struct clk_branch gcc_blsp1_qup6_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup6_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup6_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2251,9 +2219,8 @@ static struct clk_branch gcc_blsp1_uart1 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart1_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart1_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart1_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2268,9 +2235,8 @@ static struct clk_branch gcc_blsp1_uart2 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart2_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart2_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2285,9 +2251,8 @@ static struct clk_branch gcc_blsp1_uart3 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart3_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart3_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart3_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2302,9 +2267,8 @@ static struct clk_branch gcc_blsp1_uart4 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart4_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart4_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart4_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2319,9 +2283,8 @@ static struct clk_branch gcc_blsp1_uart5 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart5_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart5_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart5_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2336,9 +2299,8 @@ static struct clk_branch gcc_blsp1_uart6 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart6_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart6_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart6_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2354,9 +2316,8 @@ static struct clk_branch gcc_prng_ahb_cl + .enable_mask = BIT(8), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2371,9 +2332,8 @@ static struct clk_branch gcc_qpic_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2388,9 +2348,8 @@ static struct clk_branch gcc_qpic_clk = + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2405,9 +2364,8 @@ static struct clk_branch gcc_pcie0_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2422,9 +2380,8 @@ static struct clk_branch gcc_pcie0_aux_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_aux_clk", +- .parent_names = (const char *[]){ +- "pcie0_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2439,9 +2396,8 @@ static struct clk_branch gcc_pcie0_axi_m + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_m_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2456,9 +2412,8 @@ static struct clk_branch gcc_pcie0_axi_s + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_s_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2474,9 +2429,8 @@ static struct clk_branch gcc_pcie0_pipe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_pipe_clk", +- .parent_names = (const char *[]){ +- "pcie0_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2491,9 +2445,8 @@ static struct clk_branch gcc_sys_noc_pci + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie0_axi_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2508,9 +2461,8 @@ static struct clk_branch gcc_pcie1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2525,9 +2477,8 @@ static struct clk_branch gcc_pcie1_aux_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_aux_clk", +- .parent_names = (const char *[]){ +- "pcie1_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2542,9 +2493,8 @@ static struct clk_branch gcc_pcie1_axi_m + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_m_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2559,9 +2509,8 @@ static struct clk_branch gcc_pcie1_axi_s + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_s_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2577,9 +2526,8 @@ static struct clk_branch gcc_pcie1_pipe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_pipe_clk", +- .parent_names = (const char *[]){ +- "pcie1_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2594,9 +2542,8 @@ static struct clk_branch gcc_sys_noc_pci + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie1_axi_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2611,9 +2558,8 @@ static struct clk_branch gcc_usb0_aux_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_aux_clk", +- .parent_names = (const char *[]){ +- "usb0_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2628,9 +2574,8 @@ static struct clk_branch gcc_sys_noc_usb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_usb0_axi_clk", +- .parent_names = (const char *[]){ +- "usb0_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2645,9 +2590,8 @@ static struct clk_branch gcc_usb0_master + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_master_clk", +- .parent_names = (const char *[]){ +- "usb0_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2662,9 +2606,8 @@ static struct clk_branch gcc_usb0_mock_u + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_mock_utmi_clk", +- .parent_names = (const char *[]){ +- "usb0_mock_utmi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2679,9 +2622,8 @@ static struct clk_branch gcc_usb0_phy_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_phy_cfg_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2697,9 +2639,8 @@ static struct clk_branch gcc_usb0_pipe_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_pipe_clk", +- .parent_names = (const char *[]){ +- "usb0_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2714,9 +2655,8 @@ static struct clk_branch gcc_usb0_sleep_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_sleep_clk", +- .parent_names = (const char *[]){ +- "gcc_sleep_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_sleep_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2731,9 +2671,8 @@ static struct clk_branch gcc_usb1_aux_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_aux_clk", +- .parent_names = (const char *[]){ +- "usb1_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2748,9 +2687,8 @@ static struct clk_branch gcc_sys_noc_usb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_usb1_axi_clk", +- .parent_names = (const char *[]){ +- "usb1_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2765,9 +2703,8 @@ static struct clk_branch gcc_usb1_master + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_master_clk", +- .parent_names = (const char *[]){ +- "usb1_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2782,9 +2719,8 @@ static struct clk_branch gcc_usb1_mock_u + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_mock_utmi_clk", +- .parent_names = (const char *[]){ +- "usb1_mock_utmi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2799,9 +2735,8 @@ static struct clk_branch gcc_usb1_phy_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_phy_cfg_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2817,9 +2752,8 @@ static struct clk_branch gcc_usb1_pipe_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_pipe_clk", +- .parent_names = (const char *[]){ +- "usb1_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2834,9 +2768,8 @@ static struct clk_branch gcc_usb1_sleep_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_sleep_clk", +- .parent_names = (const char *[]){ +- "gcc_sleep_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_sleep_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2851,9 +2784,8 @@ static struct clk_branch gcc_sdcc1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2868,9 +2800,8 @@ static struct clk_branch gcc_sdcc1_apps_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_apps_clk", +- .parent_names = (const char *[]){ +- "sdcc1_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc1_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2885,9 +2816,8 @@ static struct clk_branch gcc_sdcc1_ice_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ice_core_clk", +- .parent_names = (const char *[]){ +- "sdcc1_ice_core_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc1_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2902,9 +2832,8 @@ static struct clk_branch gcc_sdcc2_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2919,9 +2848,8 @@ static struct clk_branch gcc_sdcc2_apps_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk", +- .parent_names = (const char *[]){ +- "sdcc2_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2936,9 +2864,8 @@ static struct clk_branch gcc_mem_noc_nss + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mem_noc_nss_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2953,9 +2880,8 @@ static struct clk_branch gcc_nss_ce_apb_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ce_apb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2970,9 +2896,8 @@ static struct clk_branch gcc_nss_ce_axi_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ce_axi_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2987,9 +2912,8 @@ static struct clk_branch gcc_nss_cfg_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_cfg_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3004,9 +2928,8 @@ static struct clk_branch gcc_nss_crypto_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_crypto_clk", +- .parent_names = (const char *[]){ +- "nss_crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3021,9 +2944,8 @@ static struct clk_branch gcc_nss_csr_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_csr_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3038,9 +2960,8 @@ static struct clk_branch gcc_nss_edma_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_edma_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3055,9 +2976,8 @@ static struct clk_branch gcc_nss_edma_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_edma_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3072,9 +2992,8 @@ static struct clk_branch gcc_nss_imem_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_imem_clk", +- .parent_names = (const char *[]){ +- "nss_imem_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_imem_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3089,9 +3008,8 @@ static struct clk_branch gcc_nss_noc_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_noc_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3106,9 +3024,8 @@ static struct clk_branch gcc_nss_ppe_btq + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_btq_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3123,9 +3040,8 @@ static struct clk_branch gcc_nss_ppe_cfg + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3140,9 +3056,8 @@ static struct clk_branch gcc_nss_ppe_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3157,9 +3072,8 @@ static struct clk_branch gcc_nss_ppe_ipe + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_ipe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3174,9 +3088,8 @@ static struct clk_branch gcc_nss_ptp_ref + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ptp_ref_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_cdiv_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_cdiv_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3192,9 +3105,8 @@ static struct clk_branch gcc_crypto_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3209,9 +3121,8 @@ static struct clk_branch gcc_nssnoc_ce_a + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ce_apb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3226,9 +3137,8 @@ static struct clk_branch gcc_nssnoc_ce_a + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ce_axi_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3243,9 +3153,8 @@ static struct clk_branch gcc_nssnoc_cryp + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_crypto_clk", +- .parent_names = (const char *[]){ +- "nss_crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3260,9 +3169,8 @@ static struct clk_branch gcc_nssnoc_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ppe_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3277,9 +3185,8 @@ static struct clk_branch gcc_nssnoc_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3294,9 +3201,8 @@ static struct clk_branch gcc_nssnoc_qosg + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_qosgen_ref_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3311,9 +3217,8 @@ static struct clk_branch gcc_nssnoc_snoc + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_snoc_clk", +- .parent_names = (const char *[]){ +- "system_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &system_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3328,9 +3233,8 @@ static struct clk_branch gcc_nssnoc_time + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_timeout_ref_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_div4_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_div4_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3345,9 +3249,8 @@ static struct clk_branch gcc_nssnoc_ubi0 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ubi0_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3362,9 +3265,8 @@ static struct clk_branch gcc_nssnoc_ubi1 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ubi1_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3380,9 +3282,8 @@ static struct clk_branch gcc_ubi0_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3398,9 +3299,8 @@ static struct clk_branch gcc_ubi0_axi_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3416,9 +3316,8 @@ static struct clk_branch gcc_ubi0_nc_axi + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_nc_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3434,9 +3333,8 @@ static struct clk_branch gcc_ubi0_core_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_core_clk", +- .parent_names = (const char *[]){ +- "nss_ubi0_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi0_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3452,9 +3350,8 @@ static struct clk_branch gcc_ubi0_mpt_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_mpt_clk", +- .parent_names = (const char *[]){ +- "ubi_mpt_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi_mpt_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3470,9 +3367,8 @@ static struct clk_branch gcc_ubi1_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3488,9 +3384,8 @@ static struct clk_branch gcc_ubi1_axi_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3506,9 +3401,8 @@ static struct clk_branch gcc_ubi1_nc_axi + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_nc_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3524,9 +3418,8 @@ static struct clk_branch gcc_ubi1_core_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_core_clk", +- .parent_names = (const char *[]){ +- "nss_ubi1_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi1_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3542,9 +3435,8 @@ static struct clk_branch gcc_ubi1_mpt_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_mpt_clk", +- .parent_names = (const char *[]){ +- "ubi_mpt_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi_mpt_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3559,9 +3451,8 @@ static struct clk_branch gcc_cmn_12gpll_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_12gpll_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3576,9 +3467,8 @@ static struct clk_branch gcc_cmn_12gpll_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_12gpll_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3593,9 +3483,8 @@ static struct clk_branch gcc_mdio_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdio_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3610,9 +3499,8 @@ static struct clk_branch gcc_uniphy0_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3627,9 +3515,8 @@ static struct clk_branch gcc_uniphy0_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3644,9 +3531,8 @@ static struct clk_branch gcc_uniphy1_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3661,9 +3547,8 @@ static struct clk_branch gcc_uniphy1_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3678,9 +3563,8 @@ static struct clk_branch gcc_uniphy2_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3695,9 +3579,8 @@ static struct clk_branch gcc_uniphy2_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3712,9 +3595,8 @@ static struct clk_branch gcc_nss_port1_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port1_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3729,9 +3611,8 @@ static struct clk_branch gcc_nss_port1_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port1_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3746,9 +3627,8 @@ static struct clk_branch gcc_nss_port2_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port2_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3763,9 +3643,8 @@ static struct clk_branch gcc_nss_port2_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port2_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3780,9 +3659,8 @@ static struct clk_branch gcc_nss_port3_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port3_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3797,9 +3675,8 @@ static struct clk_branch gcc_nss_port3_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port3_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3814,9 +3691,8 @@ static struct clk_branch gcc_nss_port4_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port4_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3831,9 +3707,8 @@ static struct clk_branch gcc_nss_port4_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port4_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3848,9 +3723,8 @@ static struct clk_branch gcc_nss_port5_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3865,9 +3739,8 @@ static struct clk_branch gcc_nss_port5_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3882,9 +3755,8 @@ static struct clk_branch gcc_nss_port6_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port6_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3899,9 +3771,8 @@ static struct clk_branch gcc_nss_port6_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port6_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3916,9 +3787,8 @@ static struct clk_branch gcc_port1_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port1_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3933,9 +3803,8 @@ static struct clk_branch gcc_port2_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port2_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3950,9 +3819,8 @@ static struct clk_branch gcc_port3_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port3_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3967,9 +3835,8 @@ static struct clk_branch gcc_port4_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port4_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3984,9 +3851,8 @@ static struct clk_branch gcc_port5_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port5_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4001,9 +3867,8 @@ static struct clk_branch gcc_port6_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port6_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4018,9 +3883,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port1_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4035,9 +3899,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port1_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4052,9 +3915,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port2_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4069,9 +3931,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port2_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4086,9 +3947,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port3_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4103,9 +3963,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port3_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4120,9 +3979,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port4_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4137,9 +3995,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port4_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4154,9 +4011,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4171,9 +4027,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4188,9 +4043,8 @@ static struct clk_branch gcc_uniphy1_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4205,9 +4059,8 @@ static struct clk_branch gcc_uniphy1_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4222,9 +4075,8 @@ static struct clk_branch gcc_uniphy2_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_port6_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4239,9 +4091,8 @@ static struct clk_branch gcc_uniphy2_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_port6_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4257,9 +4108,8 @@ static struct clk_branch gcc_crypto_ahb_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4275,9 +4125,8 @@ static struct clk_branch gcc_crypto_axi_ + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_axi_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4293,9 +4142,8 @@ static struct clk_branch gcc_crypto_clk + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_clk", +- .parent_names = (const char *[]){ +- "crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4310,9 +4158,8 @@ static struct clk_branch gcc_gp1_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", +- .parent_names = (const char *[]){ +- "gp1_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4327,9 +4174,8 @@ static struct clk_branch gcc_gp2_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", +- .parent_names = (const char *[]){ +- "gp2_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4344,9 +4190,8 @@ static struct clk_branch gcc_gp3_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", +- .parent_names = (const char *[]){ +- "gp3_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4368,7 +4213,7 @@ static struct clk_rcg2 pcie0_rchng_clk_s + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_rchng_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; diff --git a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch new file mode 100644 index 0000000000..6a525f2c3e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch @@ -0,0 +1,54 @@ +From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001 +From: Stephan Gerhold <stephan.gerhold@kernkonzept.com> +Date: Wed, 6 Jul 2022 15:41:29 +0200 +Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay + +The amount of time required between asserting and deasserting the reset +signal can vary depending on the involved hardware component. Sometimes +1 us might not be enough and a larger delay is necessary to conform to +the specifications. + +Usually this is worked around in the consuming drivers, by replacing +reset_control_reset() with a sequence of reset_control_assert(), waiting +for a custom delay, followed by reset_control_deassert(). + +However, in some cases the driver making use of the reset is generic and +can be used with different reset controllers. In this case the reset +time requirement is better handled directly by the reset controller +driver. + +Make this possible by adding an "udelay" field to the qcom_reset_map +that allows setting a different reset delay (in microseconds). + +Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com +--- + drivers/clk/qcom/reset.c | 4 +++- + drivers/clk/qcom/reset.h | 1 + + 2 files changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/clk/qcom/reset.c ++++ b/drivers/clk/qcom/reset.c +@@ -13,8 +13,10 @@ + + static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id) + { ++ struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev); ++ + rcdev->ops->assert(rcdev, id); +- udelay(1); ++ udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */ + rcdev->ops->deassert(rcdev, id); + return 0; + } +--- a/drivers/clk/qcom/reset.h ++++ b/drivers/clk/qcom/reset.h +@@ -11,6 +11,7 @@ + struct qcom_reset_map { + unsigned int reg; + u8 bit; ++ u8 udelay; + }; + + struct regmap; diff --git a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch new file mode 100644 index 0000000000..e0725a6612 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch @@ -0,0 +1,59 @@ +From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 7 Nov 2022 14:28:59 +0100 +Subject: [PATCH] clk: qcom: reset: support resetting multiple bits + +This patch adds the support for giving the complete bitmask +in reset structure and reset operation will use this bitmask +for all reset operations. + +Currently, reset structure only takes a single bit for each reset +and then calculates the bitmask by using the BIT() macro. + +However, this is not sufficient anymore for newer SoC-s like IPQ8074, +IPQ6018 and more, since their networking resets require multiple bits +to be asserted in order to properly reset the HW block completely. + +So, in order to allow asserting multiple bits add "bitmask" field to +qcom_reset_map, and then use that bitmask value if its populated in the +driver, if its not populated, then we just default to existing behaviour +and calculate the bitmask on the fly. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com +--- + drivers/clk/qcom/reset.c | 4 ++-- + drivers/clk/qcom/reset.h | 1 + + 2 files changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/reset.c ++++ b/drivers/clk/qcom/reset.c +@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle + + rst = to_qcom_reset_controller(rcdev); + map = &rst->reset_map[id]; +- mask = BIT(map->bit); ++ mask = map->bitmask ? map->bitmask : BIT(map->bit); + + return regmap_update_bits(rst->regmap, map->reg, mask, mask); + } +@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control + + rst = to_qcom_reset_controller(rcdev); + map = &rst->reset_map[id]; +- mask = BIT(map->bit); ++ mask = map->bitmask ? map->bitmask : BIT(map->bit); + + return regmap_update_bits(rst->regmap, map->reg, mask, 0); + } +--- a/drivers/clk/qcom/reset.h ++++ b/drivers/clk/qcom/reset.h +@@ -12,6 +12,7 @@ struct qcom_reset_map { + unsigned int reg; + u8 bit; + u8 udelay; ++ u32 bitmask; + }; + + struct regmap; diff --git a/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch b/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch new file mode 100644 index 0000000000..75f16a1673 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch @@ -0,0 +1,39 @@ +From e78a40eb24187a8b4f9b89e2181f674df39c2013 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 7 Nov 2022 14:29:00 +0100 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add missing networking + resets + +Add bindings for the missing networking resets found in IPQ8074 GCC. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -367,6 +367,20 @@ + #define GCC_PCIE1_AHB_ARES 129 + #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 + #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 ++#define GCC_PPE_FULL_RESET 132 ++#define GCC_UNIPHY0_SOFT_RESET 133 ++#define GCC_UNIPHY0_XPCS_RESET 134 ++#define GCC_UNIPHY1_SOFT_RESET 135 ++#define GCC_UNIPHY1_XPCS_RESET 136 ++#define GCC_UNIPHY2_SOFT_RESET 137 ++#define GCC_UNIPHY2_XPCS_RESET 138 ++#define GCC_EDMA_HW_RESET 139 ++#define GCC_NSSPORT1_RESET 140 ++#define GCC_NSSPORT2_RESET 141 ++#define GCC_NSSPORT3_RESET 142 ++#define GCC_NSSPORT4_RESET 143 ++#define GCC_NSSPORT5_RESET 144 ++#define GCC_NSSPORT6_RESET 145 + + #define USB0_GDSC 0 + #define USB1_GDSC 1 diff --git a/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch b/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch new file mode 100644 index 0000000000..212fc84869 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch @@ -0,0 +1,41 @@ +From da76cb63d04dc22ed32123b8c1d084c006d67bfb Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 7 Nov 2022 14:29:01 +0100 +Subject: [PATCH] clk: qcom: ipq8074: add missing networking resets + +Downstream QCA 5.4 kernel defines networking resets which are not present +in the mainline kernel but are required for the networking drivers. + +So, port the downstream resets and avoid using magic values for mask, +construct mask for resets which require multiple bits to be set/cleared. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -4671,6 +4671,20 @@ static const struct qcom_reset_map gcc_i + [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 }, + [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 }, + [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, ++ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) }, ++ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) }, ++ [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, ++ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) }, ++ [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, ++ [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) }, ++ [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 }, ++ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) }, ++ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) }, ++ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) }, ++ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) }, ++ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, ++ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, ++ [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, + }; + + static struct gdsc *gcc_ipq8074_gdscs[] = { diff --git a/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch b/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch new file mode 100644 index 0000000000..7372b1da8e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch @@ -0,0 +1,152 @@ +From 78936d46470938caa9a7ea529deeb36777b4f98e Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:46:55 +0100 +Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for all parents + +It appears that having only .name populated in parent_data for clocks +which are only globally searchable currently will not work as the clk core +won't copy that name if there is no .fw_name present as well. + +So, populate .fw_name for all parent clocks in parent_data. + +Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") + +Co-developed-by: Christian Marangi <ansuelsmth@gmail.com> +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221116214655.1116467-1-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 52 +++++++++++++++++----------------- + 1 file changed, 26 insertions(+), 26 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -680,7 +680,7 @@ static struct clk_rcg2 pcie0_aux_clk_src + }; + + static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { +- { .name = "pcie20_phy0_pipe_clk" }, ++ { .fw_name = "pcie0_pipe", .name = "pcie20_phy0_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -733,7 +733,7 @@ static struct clk_rcg2 pcie1_aux_clk_src + }; + + static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { +- { .name = "pcie20_phy1_pipe_clk" }, ++ { .fw_name = "pcie1_pipe", .name = "pcie20_phy1_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -1137,7 +1137,7 @@ static const struct freq_tbl ftbl_nss_no + + static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "bias_pll_nss_noc_clk" }, ++ { .fw_name = "bias_pll_nss_noc_clk", .name = "bias_pll_nss_noc_clk" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll2.clkr.hw }, + }; +@@ -1362,7 +1362,7 @@ static const struct freq_tbl ftbl_nss_pp + + static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll4.clkr.hw }, + { .hw = &nss_crypto_pll.clkr.hw }, +@@ -1413,10 +1413,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { +@@ -1465,10 +1465,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { +@@ -1696,12 +1696,12 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy1_gcc_rx_clk" }, +- { .name = "uniphy1_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, ++ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map +@@ -1758,12 +1758,12 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy1_gcc_tx_clk" }, +- { .name = "uniphy1_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, ++ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map +@@ -1820,10 +1820,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy2_gcc_rx_clk" }, +- { .name = "uniphy2_gcc_tx_clk" }, ++ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, ++ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { +@@ -1877,10 +1877,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy2_gcc_tx_clk" }, +- { .name = "uniphy2_gcc_rx_clk" }, ++ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, ++ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { diff --git a/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch b/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch new file mode 100644 index 0000000000..2594d26cfe --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch @@ -0,0 +1,36 @@ +From 9033c3c86ea0dd35bd2ab957317573b755967298 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 30 Oct 2022 18:57:03 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: pass XO and sleep clocks to GCC + +Pass XO and sleep clocks to the GCC controller so it does not have to +find them by matching globaly by name. + +If not passed directly, driver maintains backwards compatibility by then +falling back to global lookup. + +Since we are here, set cell numbers in decimal instead of hex. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -360,9 +360,11 @@ + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; +- #clock-cells = <0x1>; ++ clocks = <&xo>, <&sleep_clk>; ++ clock-names = "xo", "sleep_clk"; ++ #clock-cells = <1>; + #power-domain-cells = <1>; +- #reset-cells = <0x1>; ++ #reset-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { diff --git a/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch b/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch new file mode 100644 index 0000000000..b4ecd776a6 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch @@ -0,0 +1,52 @@ +From 0afa47c1b57ba645225b38654869a6e5d2939da5 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Date: Fri, 6 May 2022 18:21:07 +0300 +Subject: [PATCH] arm64: dts: qcom: replace deprecated perst-gpio with + perst-gpios + +Replace deprecated perst-gpio and wake-gpio properties with up-to-date +perst-gpios and wake-gpios in the Qualcomm device trees. + +Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++-- + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -49,12 +49,12 @@ + + &pcie0 { + status = "okay"; +- perst-gpio = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 0x1>; + }; + + &pcie1 { + status = "okay"; +- perst-gpio = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 0x1>; + }; + + &pcie_phy0 { +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -39,12 +39,12 @@ + + &pcie0 { + status = "ok"; +- perst-gpio = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 0x1>; + }; + + &pcie1 { + status = "ok"; +- perst-gpio = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 0x1>; + }; + + &pcie_phy0 { diff --git a/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch b/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch new file mode 100644 index 0000000000..fd1de69663 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch @@ -0,0 +1,57 @@ +From 0eda4c5c7704363f665f4ccf0327349faad245a4 Mon Sep 17 00:00:00 2001 +From: Caleb Connolly <caleb.connolly@linaro.org> +Date: Fri, 29 Apr 2022 23:08:56 +0100 +Subject: [PATCH] spmi: add a helper to look up an SPMI device from a device + node + +The helper function spmi_device_from_of() takes a device node and +returns the SPMI device associated with it. +This is like of_find_device_by_node but for SPMI devices. + +Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> +Acked-by: Stephen Boyd <sboyd@kernel.org> +Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> +--- + drivers/spmi/spmi.c | 17 +++++++++++++++++ + include/linux/spmi.h | 3 +++ + 2 files changed, 20 insertions(+) + +--- a/drivers/spmi/spmi.c ++++ b/drivers/spmi/spmi.c +@@ -387,6 +387,23 @@ static struct bus_type spmi_bus_type = { + }; + + /** ++ * spmi_device_from_of() - get the associated SPMI device from a device node ++ * ++ * @np: device node ++ * ++ * Returns the struct spmi_device associated with a device node or NULL. ++ */ ++struct spmi_device *spmi_device_from_of(struct device_node *np) ++{ ++ struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np); ++ ++ if (dev) ++ return to_spmi_device(dev); ++ return NULL; ++} ++EXPORT_SYMBOL_GPL(spmi_device_from_of); ++ ++/** + * spmi_controller_alloc() - Allocate a new SPMI device + * @ctrl: associated controller + * +--- a/include/linux/spmi.h ++++ b/include/linux/spmi.h +@@ -164,6 +164,9 @@ static inline void spmi_driver_unregiste + module_driver(__spmi_driver, spmi_driver_register, \ + spmi_driver_unregister) + ++struct device_node; ++ ++struct spmi_device *spmi_device_from_of(struct device_node *np); + int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf); + int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf, + size_t len); diff --git a/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch b/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch new file mode 100644 index 0000000000..02a37aa376 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch @@ -0,0 +1,60 @@ +From 60df90d6829d16338e2971420220395cfc289247 Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson <bjorn.andersson@linaro.org> +Date: Sun, 17 Oct 2021 09:12:16 -0700 +Subject: [PATCH] mfd: qcom-spmi-pmic: Sort compatibles in the driver + +Sort the compatibles in the driver, to make it easier to validate that +the DT binding and driver are in sync. + +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +Link: https://lore.kernel.org/r/20211017161218.2378176-2-bjorn.andersson@linaro.org +--- + drivers/mfd/qcom-spmi-pmic.c | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -40,27 +40,27 @@ + #define PM660_SUBTYPE 0x1B + + static const struct of_device_id pmic_spmi_id_table[] = { +- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, +- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, ++ { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, ++ { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, ++ { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, ++ { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, + { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, +- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, + { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, +- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, +- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, +- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, +- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, +- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, +- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, +- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, ++ { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, ++ { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, + { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, ++ { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, ++ { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, + { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, +- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, ++ { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, + { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, ++ { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, ++ { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, ++ { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, ++ { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, ++ { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, + { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, +- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, +- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, +- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, ++ { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch b/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch new file mode 100644 index 0000000000..c2b3e8304d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch @@ -0,0 +1,65 @@ +From 18921bfd81c88fb85a19683467f680897672f062 Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson <bjorn.andersson@linaro.org> +Date: Sun, 17 Oct 2021 09:12:18 -0700 +Subject: [PATCH] mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo + +The Qualcomm socinfo driver has eight more PMICs described, add these to +the SPMI PMIC driver as well. + +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +Link: https://lore.kernel.org/r/20211017161218.2378176-4-bjorn.andersson@linaro.org +--- + drivers/mfd/qcom-spmi-pmic.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -31,6 +31,8 @@ + #define PM8916_SUBTYPE 0x0b + #define PM8004_SUBTYPE 0x0c + #define PM8909_SUBTYPE 0x0d ++#define PM8028_SUBTYPE 0x0e ++#define PM8901_SUBTYPE 0x0f + #define PM8950_SUBTYPE 0x10 + #define PMI8950_SUBTYPE 0x11 + #define PM8998_SUBTYPE 0x14 +@@ -38,6 +40,13 @@ + #define PM8005_SUBTYPE 0x18 + #define PM660L_SUBTYPE 0x1A + #define PM660_SUBTYPE 0x1B ++#define PM8150_SUBTYPE 0x1E ++#define PM8150L_SUBTYPE 0x1f ++#define PM8150B_SUBTYPE 0x20 ++#define PMK8002_SUBTYPE 0x21 ++#define PM8009_SUBTYPE 0x24 ++#define PM8150C_SUBTYPE 0x26 ++#define SMB2351_SUBTYPE 0x29 + + static const struct of_device_id pmic_spmi_id_table[] = { + { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, +@@ -45,9 +54,15 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, + { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, + { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, ++ { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, + { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, ++ { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, ++ { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, ++ { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, ++ { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, + { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, + { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, ++ { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, + { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, + { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, + { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +@@ -60,6 +75,8 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, + { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, + { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, ++ { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, ++ { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, + { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { } + }; diff --git a/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch b/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch new file mode 100644 index 0000000000..35e0cc6725 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch @@ -0,0 +1,417 @@ +From 231f6a9f24a5e9b6e7af801ca2377970474cdf59 Mon Sep 17 00:00:00 2001 +From: Caleb Connolly <caleb.connolly@linaro.org> +Date: Fri, 29 Apr 2022 23:08:57 +0100 +Subject: [PATCH] mfd: qcom-spmi-pmic: expose the PMIC revid information to + clients + +Some PMIC functions such as the RRADC need to be aware of the PMIC +chip revision information to implement errata or otherwise adjust +behaviour, export the PMIC information to enable this. + +This is specifically required to enable the RRADC to adjust +coefficients based on which chip fab the PMIC was produced in, +this can vary per unique device and therefore has to be read at +runtime. + +Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Acked-by: Lee Jones <lee.jones@linaro.org> +Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> +--- + drivers/mfd/qcom-spmi-pmic.c | 265 ++++++++++++++++++++---------- + include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++ + 2 files changed, 235 insertions(+), 90 deletions(-) + create mode 100644 include/soc/qcom/qcom-spmi-pmic.h + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -3,11 +3,16 @@ + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + */ + ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/gfp.h> + #include <linux/kernel.h> + #include <linux/module.h> + #include <linux/spmi.h> ++#include <linux/types.h> + #include <linux/regmap.h> + #include <linux/of_platform.h> ++#include <soc/qcom/qcom-spmi-pmic.h> + + #define PMIC_REV2 0x101 + #define PMIC_REV3 0x102 +@@ -17,106 +22,140 @@ + + #define PMIC_TYPE_VALUE 0x51 + +-#define COMMON_SUBTYPE 0x00 +-#define PM8941_SUBTYPE 0x01 +-#define PM8841_SUBTYPE 0x02 +-#define PM8019_SUBTYPE 0x03 +-#define PM8226_SUBTYPE 0x04 +-#define PM8110_SUBTYPE 0x05 +-#define PMA8084_SUBTYPE 0x06 +-#define PMI8962_SUBTYPE 0x07 +-#define PMD9635_SUBTYPE 0x08 +-#define PM8994_SUBTYPE 0x09 +-#define PMI8994_SUBTYPE 0x0a +-#define PM8916_SUBTYPE 0x0b +-#define PM8004_SUBTYPE 0x0c +-#define PM8909_SUBTYPE 0x0d +-#define PM8028_SUBTYPE 0x0e +-#define PM8901_SUBTYPE 0x0f +-#define PM8950_SUBTYPE 0x10 +-#define PMI8950_SUBTYPE 0x11 +-#define PM8998_SUBTYPE 0x14 +-#define PMI8998_SUBTYPE 0x15 +-#define PM8005_SUBTYPE 0x18 +-#define PM660L_SUBTYPE 0x1A +-#define PM660_SUBTYPE 0x1B +-#define PM8150_SUBTYPE 0x1E +-#define PM8150L_SUBTYPE 0x1f +-#define PM8150B_SUBTYPE 0x20 +-#define PMK8002_SUBTYPE 0x21 +-#define PM8009_SUBTYPE 0x24 +-#define PM8150C_SUBTYPE 0x26 +-#define SMB2351_SUBTYPE 0x29 ++#define PMIC_REV4_V2 0x02 ++ ++struct qcom_spmi_dev { ++ int num_usids; ++ struct qcom_spmi_pmic pmic; ++}; ++ ++#define N_USIDS(n) ((void *)n) + + static const struct of_device_id pmic_spmi_id_table[] = { +- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, +- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, +- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, +- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, +- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, +- { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, +- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, +- { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, +- { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, +- { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, +- { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, +- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, +- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, +- { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, +- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, +- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, +- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, +- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, +- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, +- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, +- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, +- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, +- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, +- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, +- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, +- { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, +- { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, +- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, ++ { .compatible = "qcom,pm660", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm660l", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8004", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8005", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8019", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8028", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8110", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150b", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150c", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150l", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8226", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8841", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8901", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8909", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8916", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8941", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8950", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8994", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8998", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pma8084", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmd9635", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8950", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8962", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, ++ { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, ++ { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, + { } + }; + +-static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) ++/* ++ * A PMIC can be represented by multiple SPMI devices, but ++ * only the base PMIC device will contain a reference to ++ * the revision information. ++ * ++ * This function takes a pointer to a pmic device and ++ * returns a pointer to the base PMIC device. ++ * ++ * This only supports PMICs with 1 or 2 USIDs. ++ */ ++static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev) + { +- unsigned int rev2, minor, major, type, subtype; +- const char *name = "unknown"; +- int ret, i; ++ struct spmi_device *sdev; ++ struct qcom_spmi_dev *ctx; ++ struct device_node *spmi_bus; ++ struct device_node *other_usid = NULL; ++ int function_parent_usid, ret; ++ u32 pmic_addr; + +- ret = regmap_read(map, PMIC_TYPE, &type); +- if (ret < 0) +- return; ++ sdev = to_spmi_device(dev); ++ ctx = dev_get_drvdata(&sdev->dev); + +- if (type != PMIC_TYPE_VALUE) +- return; ++ /* ++ * Quick return if the function device is already in the base ++ * USID. This will always be hit for PMICs with only 1 USID. ++ */ ++ if (sdev->usid % ctx->num_usids == 0) ++ return sdev; + +- ret = regmap_read(map, PMIC_SUBTYPE, &subtype); ++ function_parent_usid = sdev->usid; ++ ++ /* ++ * Walk through the list of PMICs until we find the sibling USID. ++ * The goal is to find the first USID which is less than the ++ * number of USIDs in the PMIC array, e.g. for a PMIC with 2 USIDs ++ * where the function device is under USID 3, we want to find the ++ * device for USID 2. ++ */ ++ spmi_bus = of_get_parent(sdev->dev.of_node); ++ do { ++ other_usid = of_get_next_child(spmi_bus, other_usid); ++ ++ ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr); ++ if (ret) ++ return ERR_PTR(ret); ++ ++ sdev = spmi_device_from_of(other_usid); ++ if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) { ++ if (!sdev) ++ /* ++ * If the base USID for this PMIC hasn't probed yet ++ * but the secondary USID has, then we need to defer ++ * the function driver so that it will attempt to ++ * probe again when the base USID is ready. ++ */ ++ return ERR_PTR(-EPROBE_DEFER); ++ return sdev; ++ } ++ } while (other_usid->sibling); ++ ++ return ERR_PTR(-ENODATA); ++} ++ ++static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, ++ struct qcom_spmi_pmic *pmic) ++{ ++ int ret; ++ ++ ret = regmap_read(map, PMIC_TYPE, &pmic->type); + if (ret < 0) +- return; ++ return ret; + +- for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { +- if (subtype == (unsigned long)pmic_spmi_id_table[i].data) +- break; +- } ++ if (pmic->type != PMIC_TYPE_VALUE) ++ return ret; + +- if (i != ARRAY_SIZE(pmic_spmi_id_table)) +- name = pmic_spmi_id_table[i].compatible; ++ ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); ++ if (ret < 0) ++ return ret; + +- ret = regmap_read(map, PMIC_REV2, &rev2); ++ pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible; ++ ++ ret = regmap_read(map, PMIC_REV2, &pmic->rev2); + if (ret < 0) +- return; ++ return ret; + +- ret = regmap_read(map, PMIC_REV3, &minor); ++ ret = regmap_read(map, PMIC_REV3, &pmic->minor); + if (ret < 0) +- return; ++ return ret; + +- ret = regmap_read(map, PMIC_REV4, &major); ++ ret = regmap_read(map, PMIC_REV4, &pmic->major); + if (ret < 0) +- return; ++ return ret; + + /* + * In early versions of PM8941 and PM8226, the major revision number +@@ -124,15 +163,49 @@ static void pmic_spmi_show_revid(struct + * Increment the major revision number here if the chip is an early + * version of PM8941 or PM8226. + */ +- if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && +- major < 0x02) +- major++; ++ if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && ++ pmic->major < PMIC_REV4_V2) ++ pmic->major++; ++ ++ if (pmic->subtype == PM8110_SUBTYPE) ++ pmic->minor = pmic->rev2; ++ ++ dev_dbg(dev, "%x: %s v%d.%d\n", ++ pmic->subtype, pmic->name, pmic->major, pmic->minor); ++ ++ return 0; ++} ++ ++/** ++ * qcom_pmic_get() - Get a pointer to the base PMIC device ++ * ++ * This function takes a struct device for a driver which is a child of a PMIC. ++ * And locates the PMIC revision information for it. ++ * ++ * @dev: the pmic function device ++ * @return: the struct qcom_spmi_pmic* pointer associated with the function device ++ */ ++const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) ++{ ++ struct spmi_device *sdev; ++ struct qcom_spmi_dev *spmi; ++ ++ /* ++ * Make sure the device is actually a child of a PMIC ++ */ ++ if (!of_match_device(pmic_spmi_id_table, dev->parent)) ++ return ERR_PTR(-EINVAL); ++ ++ sdev = qcom_pmic_get_base_usid(dev->parent); + +- if (subtype == PM8110_SUBTYPE) +- minor = rev2; ++ if (IS_ERR(sdev)) ++ return ERR_CAST(sdev); + +- dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); ++ spmi = dev_get_drvdata(&sdev->dev); ++ ++ return &spmi->pmic; + } ++EXPORT_SYMBOL(qcom_pmic_get); + + static const struct regmap_config spmi_regmap_config = { + .reg_bits = 16, +@@ -144,14 +217,26 @@ static const struct regmap_config spmi_r + static int pmic_spmi_probe(struct spmi_device *sdev) + { + struct regmap *regmap; ++ struct qcom_spmi_dev *ctx; ++ int ret; + + regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + ++ ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) ++ return -ENOMEM; ++ ++ ctx->num_usids = (uintptr_t)of_device_get_match_data(&sdev->dev); ++ + /* Only the first slave id for a PMIC contains this information */ +- if (sdev->usid % 2 == 0) +- pmic_spmi_show_revid(regmap, &sdev->dev); ++ if (sdev->usid % ctx->num_usids == 0) { ++ ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic); ++ if (ret < 0) ++ return ret; ++ } ++ spmi_device_set_drvdata(sdev, ctx); + + return devm_of_platform_populate(&sdev->dev); + } +--- /dev/null ++++ b/include/soc/qcom/qcom-spmi-pmic.h +@@ -0,0 +1,60 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++/* Copyright (c) 2022 Linaro. All rights reserved. ++ * Author: Caleb Connolly <caleb.connolly@linaro.org> ++ */ ++ ++#ifndef __QCOM_SPMI_PMIC_H__ ++#define __QCOM_SPMI_PMIC_H__ ++ ++#include <linux/device.h> ++ ++#define COMMON_SUBTYPE 0x00 ++#define PM8941_SUBTYPE 0x01 ++#define PM8841_SUBTYPE 0x02 ++#define PM8019_SUBTYPE 0x03 ++#define PM8226_SUBTYPE 0x04 ++#define PM8110_SUBTYPE 0x05 ++#define PMA8084_SUBTYPE 0x06 ++#define PMI8962_SUBTYPE 0x07 ++#define PMD9635_SUBTYPE 0x08 ++#define PM8994_SUBTYPE 0x09 ++#define PMI8994_SUBTYPE 0x0a ++#define PM8916_SUBTYPE 0x0b ++#define PM8004_SUBTYPE 0x0c ++#define PM8909_SUBTYPE 0x0d ++#define PM8028_SUBTYPE 0x0e ++#define PM8901_SUBTYPE 0x0f ++#define PM8950_SUBTYPE 0x10 ++#define PMI8950_SUBTYPE 0x11 ++#define PM8998_SUBTYPE 0x14 ++#define PMI8998_SUBTYPE 0x15 ++#define PM8005_SUBTYPE 0x18 ++#define PM660L_SUBTYPE 0x1A ++#define PM660_SUBTYPE 0x1B ++#define PM8150_SUBTYPE 0x1E ++#define PM8150L_SUBTYPE 0x1f ++#define PM8150B_SUBTYPE 0x20 ++#define PMK8002_SUBTYPE 0x21 ++#define PM8009_SUBTYPE 0x24 ++#define PM8150C_SUBTYPE 0x26 ++#define SMB2351_SUBTYPE 0x29 ++ ++#define PMI8998_FAB_ID_SMIC 0x11 ++#define PMI8998_FAB_ID_GF 0x30 ++ ++#define PM660_FAB_ID_GF 0x0 ++#define PM660_FAB_ID_TSMC 0x2 ++#define PM660_FAB_ID_MX 0x3 ++ ++struct qcom_spmi_pmic { ++ unsigned int type; ++ unsigned int subtype; ++ unsigned int major; ++ unsigned int minor; ++ unsigned int rev2; ++ const char *name; ++}; ++ ++const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); ++ ++#endif /* __QCOM_SPMI_PMIC_H__ */ diff --git a/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch b/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch new file mode 100644 index 0000000000..ecf8772bfd --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch @@ -0,0 +1,52 @@ +From 0c309f4e86c827cd5fd2eb0e36d5d1f19927380d Mon Sep 17 00:00:00 2001 +From: Caleb Connolly <caleb.connolly@linaro.org> +Date: Fri, 29 Apr 2022 23:08:58 +0100 +Subject: [PATCH] mfd: qcom-spmi-pmic: read fab id on supported PMICs + +The PMI8998 and PM660 expose the fab_id, this is needed by drivers like +the RRADC to calibrate ADC values. + +Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Acked-by: Lee Jones <lee.jones@linaro.org> +Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> +--- + drivers/mfd/qcom-spmi-pmic.c | 7 +++++++ + include/soc/qcom/qcom-spmi-pmic.h | 1 + + 2 files changed, 8 insertions(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -19,6 +19,7 @@ + #define PMIC_REV4 0x103 + #define PMIC_TYPE 0x104 + #define PMIC_SUBTYPE 0x105 ++#define PMIC_FAB_ID 0x1f2 + + #define PMIC_TYPE_VALUE 0x51 + +@@ -157,6 +158,12 @@ static int pmic_spmi_load_revid(struct r + if (ret < 0) + return ret; + ++ if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) { ++ ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id); ++ if (ret < 0) ++ return ret; ++ } ++ + /* + * In early versions of PM8941 and PM8226, the major revision number + * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0). +--- a/include/soc/qcom/qcom-spmi-pmic.h ++++ b/include/soc/qcom/qcom-spmi-pmic.h +@@ -52,6 +52,7 @@ struct qcom_spmi_pmic { + unsigned int major; + unsigned int minor; + unsigned int rev2; ++ unsigned int fab_id; + const char *name; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch new file mode 100644 index 0000000000..109a08aea3 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch @@ -0,0 +1,27 @@ +From 46878413ba10170aaa9b7c797816e928a11923e3 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:18:12 +0200 +Subject: [PATCH] mfd: qcom-spmi-pmic: Add support for PMP8074 + +Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm +IPQ8074 SoC-s. + +It shares the same subtype identifier as PM8901. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Lee Jones <lee@kernel.org> +Link: https://lore.kernel.org/r/20220818221815.346233-2-robimarko@gmail.com +--- + drivers/mfd/qcom-spmi-pmic.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -60,6 +60,7 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmp8074", .data = N_USIDS(2) }, + { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, + { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, + { } diff --git a/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch b/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch new file mode 100644 index 0000000000..b0dbe7d088 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch @@ -0,0 +1,58 @@ +From dedc087d43013ab6043dd1da4cd585dd4242a6bb Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 4 Jul 2022 23:23:54 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for HT_P150 + +HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout +found in PMP8074 and PMS405 PMIC-s. + +Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V +but the actual MAX output voltage depends on the exact LDO in each of +the PMIC-s. + +It has a max current of 150mA, voltage step of 8mV. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -164,6 +164,7 @@ enum spmi_regulator_subtype { + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, ++ SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, + }; + + enum spmi_common_regulator_registers { +@@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_ + SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), + }; + ++static struct spmi_voltage_range ht_p150_ranges[] = { ++ SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), ++}; ++ + static DEFINE_SPMI_SET_POINTS(pldo); + static DEFINE_SPMI_SET_POINTS(nldo1); + static DEFINE_SPMI_SET_POINTS(nldo2); +@@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660); + static DEFINE_SPMI_SET_POINTS(ht_lvpldo); + static DEFINE_SPMI_SET_POINTS(ht_nldo); + static DEFINE_SPMI_SET_POINTS(hfs430); ++static DEFINE_SPMI_SET_POINTS(ht_p150); + + static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, + int len) +@@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_h + + static const struct spmi_regulator_mapping supported_regulators[] = { + /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ ++ SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), + SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), + SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), diff --git a/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch b/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch new file mode 100644 index 0000000000..6b76f2c3fc --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch @@ -0,0 +1,59 @@ +From 14789f38e03c42857613b69ff0f032e03653b246 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 4 Jul 2022 23:23:55 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for HT_P600 + +HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout +found in PMP8074 and PMS405 PMIC-s. + +Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V +but the actual MAX output voltage depends on the exact LDO in each of +the PMIC-s. +Their usual voltage that they are used is 1.8V. + +It has a max current of 600mA, voltage step of 8mV. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -165,6 +165,7 @@ enum spmi_regulator_subtype { + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, + SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, ++ SPMI_REGULATOR_SUBTYPE_HT_P600 = 0x3d, + }; + + enum spmi_common_regulator_registers { +@@ -549,6 +550,10 @@ static struct spmi_voltage_range ht_p150 + SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), + }; + ++static struct spmi_voltage_range ht_p600_ranges[] = { ++ SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000), ++}; ++ + static DEFINE_SPMI_SET_POINTS(pldo); + static DEFINE_SPMI_SET_POINTS(nldo1); + static DEFINE_SPMI_SET_POINTS(nldo2); +@@ -570,6 +575,7 @@ static DEFINE_SPMI_SET_POINTS(ht_lvpldo) + static DEFINE_SPMI_SET_POINTS(ht_nldo); + static DEFINE_SPMI_SET_POINTS(hfs430); + static DEFINE_SPMI_SET_POINTS(ht_p150); ++static DEFINE_SPMI_SET_POINTS(ht_p600); + + static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, + int len) +@@ -1464,6 +1470,7 @@ static const struct regulator_ops spmi_h + + static const struct spmi_regulator_mapping supported_regulators[] = { + /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ ++ SPMI_VREG(LDO, HT_P600, 0, INF, HFS430, hfs430, ht_p600, 10000), + SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), + SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), diff --git a/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch b/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch new file mode 100644 index 0000000000..ce6985b13b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch @@ -0,0 +1,68 @@ +From 3e3da8da25f81fa3f0f3a37f60d10b17d1166864 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 4 Jul 2022 23:23:57 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for PMP8074 regulators + +PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s. + +It features 5 HF-SMPS and 13 LDO regulators. + +HF-SMPS regulators are Buck HFS430 regulators. +L1, L2 and L3 are HT_N1200_ST subtype LDO regulators. +L4 is HT_N300_ST subtype LDO regulator. +L5 and L6 are HT_P600 subtype LDO regulators. +L7, L11, L12 and L13 are HT_P150 subtype LDO regulators. +L10 is HT_P50 subtype LDO regulator. + +This commit adds support for all of the buck regulators and LDO-s except +for L10 as I dont have documentation on its output voltage range. + +S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores +and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/regulator/qcom_spmi-regulator.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -2101,6 +2101,28 @@ static const struct spmi_regulator_data + { } + }; + ++static const struct spmi_regulator_data pmp8074_regulators[] = { ++ { "s1", 0x1400, "vdd_s1"}, ++ { "s2", 0x1700, "vdd_s2"}, ++ { "s3", 0x1a00, "vdd_s3"}, ++ { "s4", 0x1d00, "vdd_s4"}, ++ { "s5", 0x2000, "vdd_s5"}, ++ { "l1", 0x4000, "vdd_l1_l2"}, ++ { "l2", 0x4100, "vdd_l1_l2"}, ++ { "l3", 0x4200, "vdd_l3_l8"}, ++ { "l4", 0x4300, "vdd_l4"}, ++ { "l5", 0x4400, "vdd_l5_l6_l15"}, ++ { "l6", 0x4500, "vdd_l5_l6_l15"}, ++ { "l7", 0x4600, "vdd_l7"}, ++ { "l8", 0x4700, "vdd_l3_l8"}, ++ { "l9", 0x4800, "vdd_l9"}, ++ /* l10 is currently unsupported HT_P50 */ ++ { "l11", 0x4a00, "vdd_l10_l11_l12_l13"}, ++ { "l12", 0x4b00, "vdd_l10_l11_l12_l13"}, ++ { "l13", 0x4c00, "vdd_l10_l11_l12_l13"}, ++ { } ++}; ++ + static const struct spmi_regulator_data pms405_regulators[] = { + { "s3", 0x1a00, "vdd_s3"}, + { } +@@ -2117,6 +2139,7 @@ static const struct of_device_id qcom_sp + { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, + { .compatible = "qcom,pm660-regulators", .data = &pm660_regulators }, + { .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators }, ++ { .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators }, + { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators }, + { } + }; diff --git a/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch new file mode 100644 index 0000000000..ba3d1750e1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch @@ -0,0 +1,25 @@ +From 204cd3516f59eb7040b814429187e674f49ba065 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 11 Jul 2022 22:34:05 +0200 +Subject: [PATCH] pinctrl: qcom-pmic-gpio: add support for PMP8074 + +PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com +Signed-off-by: Linus Walleij <linus.walleij@linaro.org> +--- + drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c ++++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +@@ -1167,6 +1167,8 @@ static const struct of_device_id pmic_gp + { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, + { .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 }, ++ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */ ++ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 }, + /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ diff --git a/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch b/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch new file mode 100644 index 0000000000..306f0dd253 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch @@ -0,0 +1,26 @@ +From 41a02abb863edca0de0373bc3deaf0639b18c589 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:18:13 +0200 +Subject: [PATCH] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5 + +Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list. +This channel measures the VADC reference LDO output. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Link: https://lore.kernel.org/r/20220818221815.346233-3-robimarko@gmail.com +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> +--- + drivers/iio/adc/qcom-spmi-adc5.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/iio/adc/qcom-spmi-adc5.c ++++ b/drivers/iio/adc/qcom-spmi-adc5.c +@@ -589,6 +589,8 @@ static const struct adc5_channels adc5_c + SCALE_HW_CALIB_DEFAULT) + [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) ++ [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, ++ SCALE_HW_CALIB_DEFAULT) + [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, diff --git a/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch b/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch new file mode 100644 index 0000000000..cd146420cf --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch @@ -0,0 +1,149 @@ +From fb76b808f8628215afebaf0f8af0bde635302590 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:18:14 +0200 +Subject: [PATCH] arm64: dts: qcom: add PMP8074 DTSI + +PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is +controlled via SPMI. + +Add DTSI for it providing GPIO, regulator, RTC and VADC support. + +RTC is disabled by default as there is no built-in battery so it will +loose time unless board vendor added a battery, so make it optional. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/pmp8074.dtsi | 125 ++++++++++++++++++++++++++ + 1 file changed, 125 insertions(+) + create mode 100644 arch/arm64/boot/dts/qcom/pmp8074.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi +@@ -0,0 +1,125 @@ ++// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause ++ ++#include <dt-bindings/spmi/spmi.h> ++#include <dt-bindings/iio/qcom,spmi-vadc.h> ++ ++&spmi_bus { ++ pmic@0 { ++ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; ++ reg = <0x0 SPMI_USID>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pmp8074_adc: adc@3100 { ++ compatible = "qcom,spmi-adc-rev2"; ++ reg = <0x3100>; ++ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #io-channel-cells = <1>; ++ ++ ref-gnd@0 { ++ reg = <ADC5_REF_GND>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vref-1p25@1 { ++ reg = <ADC5_1P25VREF>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vref-vadc@2 { ++ reg = <ADC5_VREF_VADC>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pmic_die: die-temp@6 { ++ reg = <ADC5_DIE_TEMP>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ xo_therm: xo-temp@76 { ++ reg = <ADC5_XO_THERM_100K_PU>; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm1: thermistor1@77 { ++ reg = <ADC5_AMUX_THM1_100K_PU>; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm2: thermistor2@78 { ++ reg = <ADC5_AMUX_THM2_100K_PU>; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm3: thermistor3@79 { ++ reg = <ADC5_AMUX_THM3_100K_PU>; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vph-pwr@131 { ++ reg = <ADC5_VPH_PWR>; ++ qcom,pre-scaling = <1 3>; ++ }; ++ }; ++ ++ pmp8074_rtc: rtc@6000 { ++ compatible = "qcom,pm8941-rtc"; ++ reg = <0x6000>; ++ reg-names = "rtc", "alarm"; ++ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; ++ allow-set-time; ++ status = "disabled"; ++ }; ++ ++ pmp8074_gpios: gpio@c000 { ++ compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; ++ reg = <0xc000>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-ranges = <&pmp8074_gpios 0 0 12>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ }; ++ ++ pmic@1 { ++ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; ++ reg = <0x1 SPMI_USID>; ++ ++ regulators { ++ compatible = "qcom,pmp8074-regulators"; ++ ++ s3: s3 { ++ regulator-name = "vdd_s3"; ++ regulator-min-microvolt = <592000>; ++ regulator-max-microvolt = <1064000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ s4: s4 { ++ regulator-name = "vdd_s4"; ++ regulator-min-microvolt = <712000>; ++ regulator-max-microvolt = <992000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ l11: l11 { ++ regulator-name = "l11"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch b/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch new file mode 100644 index 0000000000..af65c0c979 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch @@ -0,0 +1,37 @@ +From 2c394cfc1779886048feca7dc7f4075da5f6328c Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 19 Aug 2022 00:18:15 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply + +Since now we have control over the PMP8074 PMIC providing various system +voltages including L11 which provides the SDIO/eMMC I/O voltage set it as +the SDHCI VQMMC supply. + +This allows SDHCI controller to switch to 1.8V I/O mode and support high +speed modes like HS200 and HS400. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -3,6 +3,7 @@ + /* Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + #include "ipq8074.dtsi" ++#include "pmp8074.dtsi" + + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; +@@ -82,6 +83,7 @@ + + &sdhc_1 { + status = "okay"; ++ vqmmc-supply = <&l11>; + }; + + &qusb_phy_0 { diff --git a/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch b/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch new file mode 100644 index 0000000000..829e2278a0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch @@ -0,0 +1,42 @@ +From 82ceb86227b1fc15c76d5fc691b2bf425f1a63b3 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 7 Nov 2022 10:29:30 +0100 +Subject: [PATCH] arm64: dts: qcom: hk01: use GPIO flags for tlmm + +Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of +harcoding the cell value. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -4,6 +4,7 @@ + */ + #include "ipq8074.dtsi" + #include "pmp8074.dtsi" ++#include <dt-bindings/gpio/gpio.h> + + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; +@@ -50,12 +51,12 @@ + + &pcie0 { + status = "okay"; +- perst-gpios = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + }; + + &pcie1 { + status = "okay"; +- perst-gpios = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + &pcie_phy0 { diff --git a/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch b/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch new file mode 100644 index 0000000000..a8bf2492f4 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch @@ -0,0 +1,82 @@ +From 1b1c1423ca3e740984aa883512a72c4ea08fbe28 Mon Sep 17 00:00:00 2001 +From: Konrad Dybcio <konrad.dybcio@linaro.org> +Date: Mon, 7 Nov 2022 15:55:17 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074-*: Fix up comments + +Make sure all multiline C-style commends begin with just '/*' with +the comment text starting on a new line. + +Also, fix up some whitespace within comments. + +Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++------ + 4 files changed, 12 insertions(+), 9 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -1,6 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-only + /dts-v1/; +-/* Copyright (c) 2017, The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + #include "ipq8074.dtsi" + #include "pmp8074.dtsi" +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts +@@ -1,5 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0-only +-/* Copyright (c) 2020 The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + /dts-v1/; + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts +@@ -1,6 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-only + /dts-v1/; +-/* Copyright (c) 2020 The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + #include "ipq8074-hk10.dtsi" + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -129,10 +129,10 @@ + status = "disabled"; + + usb1_ssphy: phy@58200 { +- reg = <0x00058200 0x130>, /* Tx */ ++ reg = <0x00058200 0x130>, /* Tx */ + <0x00058400 0x200>, /* Rx */ +- <0x00058800 0x1f8>, /* PCS */ +- <0x00058600 0x044>; /* PCS misc*/ ++ <0x00058800 0x1f8>, /* PCS */ ++ <0x00058600 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; +@@ -172,10 +172,10 @@ + status = "disabled"; + + usb0_ssphy: phy@78200 { +- reg = <0x00078200 0x130>, /* Tx */ ++ reg = <0x00078200 0x130>, /* Tx */ + <0x00078400 0x200>, /* Rx */ +- <0x00078800 0x1f8>, /* PCS */ +- <0x00078600 0x044>; /* PCS misc*/ ++ <0x00078800 0x1f8>, /* PCS */ ++ <0x00078600 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch b/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch new file mode 100644 index 0000000000..81cd035804 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch @@ -0,0 +1,60 @@ +From 5f20690f77878b1ba24ec88df01b92d5131a6780 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Tue, 8 Nov 2022 15:23:57 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: align TLMM pin configuration with + DT schema + +DT schema expects TLMM pin configuration nodes to be named with +'-state' suffix and their optional children with '-pins' suffix. + +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -317,35 +317,35 @@ + interrupt-controller; + #interrupt-cells = <0x2>; + +- serial_4_pins: serial4-pinmux { ++ serial_4_pins: serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + +- i2c_0_pins: i2c-0-pinmux { ++ i2c_0_pins: i2c-0-state { + pins = "gpio42", "gpio43"; + function = "blsp1_i2c"; + drive-strength = <8>; + bias-disable; + }; + +- spi_0_pins: spi-0-pins { ++ spi_0_pins: spi-0-state { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + +- hsuart_pins: hsuart-pins { ++ hsuart_pins: hsuart-state { + pins = "gpio46", "gpio47", "gpio48", "gpio49"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + +- qpic_pins: qpic-pins { ++ qpic_pins: qpic-state { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", diff --git a/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch b/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch new file mode 100644 index 0000000000..ed1b063972 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch @@ -0,0 +1,50 @@ +From a212eb94fc9f72a126df651c5d7898feaea29526 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 5 Sep 2021 19:11:31 +0200 +Subject: [PATCH] soc: qcom: socinfo: Add IPQ8074 family ID-s + +IPQ8074 family SoC ID-s are missing, so lets add them based on +the downstream driver. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Kathiravan T <kathirav@codeaurora.org> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com +--- + drivers/soc/qcom/socinfo.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/soc/qcom/socinfo.c ++++ b/drivers/soc/qcom/socinfo.c +@@ -281,19 +281,31 @@ static const struct soc_id soc_id[] = { + { 319, "APQ8098" }, + { 321, "SDM845" }, + { 322, "MDM9206" }, ++ { 323, "IPQ8074" }, + { 324, "SDA660" }, + { 325, "SDM658" }, + { 326, "SDA658" }, + { 327, "SDA630" }, + { 338, "SDM450" }, + { 341, "SDA845" }, ++ { 342, "IPQ8072" }, ++ { 343, "IPQ8076" }, ++ { 344, "IPQ8078" }, + { 345, "SDM636" }, + { 346, "SDA636" }, + { 349, "SDM632" }, + { 350, "SDA632" }, + { 351, "SDA450" }, + { 356, "SM8250" }, ++ { 375, "IPQ8070" }, ++ { 376, "IPQ8071" }, ++ { 389, "IPQ8072A" }, ++ { 390, "IPQ8074A" }, ++ { 391, "IPQ8076A" }, ++ { 392, "IPQ8078A" }, + { 394, "SM6125" }, ++ { 395, "IPQ8070A" }, ++ { 396, "IPQ8071A" }, + { 402, "IPQ6018" }, + { 403, "IPQ6028" }, + { 421, "IPQ6000" }, diff --git a/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch b/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch new file mode 100644 index 0000000000..fddc82ed35 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch @@ -0,0 +1,47 @@ +From 2b0fe9137aa32d7fc367bf3a1cef4fa97ece6d58 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Tue, 23 Aug 2022 22:43:51 +0200 +Subject: [PATCH] phy: qcom-qmp-pcie: make pipe clock rate configurable + +IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz +like every other PCIe QMP PHY does, so make it configurable as part of the +qmp_phy_cfg. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/qualcomm/phy-qcom-qmp.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/phy/qualcomm/phy-qcom-qmp.c ++++ b/drivers/phy/qualcomm/phy-qcom-qmp.c +@@ -2842,6 +2842,9 @@ struct qmp_phy_cfg { + /* true, if PHY has secondary tx/rx lanes to be configured */ + bool is_dual_lane_phy; + ++ /* QMP PHY pipe clock interface rate */ ++ unsigned long pipe_clock_rate; ++ + /* true, if PCS block has no separate SW_RESET register */ + bool no_pcs_sw_reset; + }; +@@ -5138,8 +5141,15 @@ static int phy_pipe_clk_register(struct + + init.ops = &clk_fixed_rate_ops; + +- /* controllers using QMP phys use 125MHz pipe clock interface */ +- fixed->fixed_rate = 125000000; ++ /* ++ * Controllers using QMP PHY-s use 125MHz pipe clock interface ++ * unless other frequency is specified in the PHY config. ++ */ ++ if (qmp->phys[0]->cfg->pipe_clock_rate) ++ fixed->fixed_rate = qmp->phys[0]->cfg->pipe_clock_rate; ++ else ++ fixed->fixed_rate = 125000000; ++ + fixed->hw.init = &init; + + ret = devm_clk_hw_register(qmp->dev, &fixed->hw); diff --git a/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch b/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch new file mode 100644 index 0000000000..c915619360 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch @@ -0,0 +1,200 @@ +From 23bd21d8c05109b57aa9508e88fbdbc2b6d33de7 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Tue, 23 Aug 2022 22:47:40 +0200 +Subject: [PATCH] phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support + +IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3. +Gen2 one is already supported, so add the support for the Gen3 one. +It uses the same register layout as IPQ6018. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/qualcomm/phy-qcom-qmp.c | 160 ++++++++++++++++++++++++++++ + 1 file changed, 160 insertions(+) + +--- a/drivers/phy/qualcomm/phy-qcom-qmp.c ++++ b/drivers/phy/qualcomm/phy-qcom-qmp.c +@@ -812,6 +812,133 @@ static const struct qmp_phy_init_tbl ipq + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), + }; + ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = { ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01), ++ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0), ++ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), ++ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11), ++ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb), ++ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6), ++ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10), ++ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), ++ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01), ++ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa), ++ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d), ++}; ++ + static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), +@@ -3167,6 +3294,36 @@ static const struct qmp_phy_cfg ipq8074_ + .pwrdn_delay_max = 1005, /* us */ + }; + ++static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = { ++ .type = PHY_TYPE_PCIE, ++ .nlanes = 1, ++ ++ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl, ++ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl), ++ .tx_tbl = ipq8074_pcie_gen3_tx_tbl, ++ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl), ++ .rx_tbl = ipq8074_pcie_gen3_rx_tbl, ++ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl), ++ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl, ++ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl), ++ .clk_list = ipq8074_pciephy_clk_l, ++ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), ++ .reset_list = ipq8074_pciephy_reset_l, ++ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), ++ .vreg_list = NULL, ++ .num_vregs = 0, ++ .regs = ipq_pciephy_gen3_regs_layout, ++ ++ .start_ctrl = SERDES_START | PCS_START, ++ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, ++ ++ .has_pwrdn_delay = true, ++ .pwrdn_delay_min = 995, /* us */ ++ .pwrdn_delay_max = 1005, /* us */ ++ ++ .pipe_clock_rate = 250000000, ++}; ++ + static const struct qmp_phy_cfg ipq6018_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 1, +@@ -5543,6 +5700,9 @@ static const struct of_device_id qcom_qm + .compatible = "qcom,ipq8074-qmp-pcie-phy", + .data = &ipq8074_pciephy_cfg, + }, { ++ .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy", ++ .data = &ipq8074_pciephy_gen3_cfg, ++ }, { + .compatible = "qcom,ipq6018-qmp-pcie-phy", + .data = &ipq6018_pciephy_cfg, + }, { diff --git a/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch b/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch new file mode 100644 index 0000000000..626507abb2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch @@ -0,0 +1,46 @@ +From 8df9fefd1d04f6f97f6015d7347104f69e6ea580 Mon Sep 17 00:00:00 2001 +From: Baruch Siach <baruch.siach@siklu.com> +Date: Tue, 21 Jun 2022 11:54:52 +0300 +Subject: [PATCH] PCI: dwc: Move GEN3_RELATED DBI definitions to common header + +These are common dwc macros that will be used for other platforms. + +Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il +Signed-off-by: Baruch Siach <baruch.siach@siklu.com> +Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> +Reviewed-by: Rob Herring <robh@kernel.org> +--- + drivers/pci/controller/dwc/pcie-designware.h | 6 ++++++ + drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------ + 2 files changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-designware.h ++++ b/drivers/pci/controller/dwc/pcie-designware.h +@@ -74,6 +74,12 @@ + #define PCIE_MSI_INTR0_MASK 0x82C + #define PCIE_MSI_INTR0_STATUS 0x830 + ++#define GEN3_RELATED_OFF 0x890 ++#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) ++#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) ++#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 ++#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) ++ + #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0 + #define PORT_MLTI_UPCFG_SUPPORT BIT(7) + +--- a/drivers/pci/controller/dwc/pcie-tegra194.c ++++ b/drivers/pci/controller/dwc/pcie-tegra194.c +@@ -193,12 +193,6 @@ + #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8) + #define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0) + +-#define GEN3_RELATED_OFF 0x890 +-#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) +-#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) +-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 +-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) +- + #define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0 + #define AMBA_ERROR_RESPONSE_CRS_SHIFT 3 + #define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0) diff --git a/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch b/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch new file mode 100644 index 0000000000..bc1464b126 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch @@ -0,0 +1,51 @@ +From d568739f1c21e1768a887ff85611769f782eb64f Mon Sep 17 00:00:00 2001 +From: Baruch Siach <baruch.siach@siklu.com> +Date: Tue, 21 Jun 2022 11:54:53 +0300 +Subject: [PATCH] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* + +The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use +PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better +describe its meaning. + +Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il +Signed-off-by: Baruch Siach <baruch.siach@siklu.com> +Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> +Reviewed-by: Rob Herring <robh@kernel.org> +Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> +--- + drivers/pci/controller/dwc/pcie-qcom.c | 17 +++++++++++++++-- + 1 file changed, 15 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -69,7 +69,20 @@ + #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c + #define CFG_BRIDGE_SB_INIT BIT(0) + +-#define PCIE_CAP_LINK1_VAL 0x2FD7F ++#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, \ ++ 250) ++#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, \ ++ 1) ++#define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \ ++ PCI_EXP_SLTCAP_PCP | \ ++ PCI_EXP_SLTCAP_MRLSP | \ ++ PCI_EXP_SLTCAP_AIP | \ ++ PCI_EXP_SLTCAP_PIP | \ ++ PCI_EXP_SLTCAP_HPS | \ ++ PCI_EXP_SLTCAP_HPC | \ ++ PCI_EXP_SLTCAP_EIP | \ ++ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \ ++ PCIE_CAP_SLOT_POWER_LIMIT_SCALE) + + #define PCIE20_PARF_Q2A_FLUSH 0x1AC + +@@ -1125,7 +1138,7 @@ static int qcom_pcie_post_init_2_3_3(str + + writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND); + writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG); +- writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); ++ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; diff --git a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch new file mode 100644 index 0000000000..817a3c64c9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch @@ -0,0 +1,122 @@ +From 180ce25d5c3ccff206f084b7ab350778641d1b1c Mon Sep 17 00:00:00 2001 +From: Prasad Malisetty <pmaliset@codeaurora.org> +Date: Thu, 7 Oct 2021 23:18:42 +0530 +Subject: [PATCH] PCI: qcom: Replace ops with struct pcie_cfg in pcie match + data + +Add struct qcom_pcie_cfg as match data for all platforms. Assign +appropriate platform ops into struct qcom_pcie_cfg and read using +of_device_get_match_data() in qcom_pcie_probe(). + +Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org +Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> +Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> +Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> +Reviewed-by: Stephen Boyd <swboyd@chromium.org> +--- + drivers/pci/controller/dwc/pcie-qcom.c | 66 +++++++++++++++++++++----- + 1 file changed, 55 insertions(+), 11 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -202,6 +202,10 @@ struct qcom_pcie_ops { + int (*config_sid)(struct qcom_pcie *pcie); + }; + ++struct qcom_pcie_cfg { ++ const struct qcom_pcie_ops *ops; ++}; ++ + struct qcom_pcie { + struct dw_pcie *pci; + void __iomem *parf; /* DT parf */ +@@ -1469,6 +1473,38 @@ static const struct qcom_pcie_ops ops_1_ + .config_sid = qcom_pcie_config_sid_sm8250, + }; + ++static const struct qcom_pcie_cfg apq8084_cfg = { ++ .ops = &ops_1_0_0, ++}; ++ ++static const struct qcom_pcie_cfg ipq8064_cfg = { ++ .ops = &ops_2_1_0, ++}; ++ ++static const struct qcom_pcie_cfg msm8996_cfg = { ++ .ops = &ops_2_3_2, ++}; ++ ++static const struct qcom_pcie_cfg ipq8074_cfg = { ++ .ops = &ops_2_3_3, ++}; ++ ++static const struct qcom_pcie_cfg ipq4019_cfg = { ++ .ops = &ops_2_4_0, ++}; ++ ++static const struct qcom_pcie_cfg sdm845_cfg = { ++ .ops = &ops_2_7_0, ++}; ++ ++static const struct qcom_pcie_cfg sm8250_cfg = { ++ .ops = &ops_1_9_0, ++}; ++ ++static const struct qcom_pcie_cfg sc7280_cfg = { ++ .ops = &ops_1_9_0, ++}; ++ + static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +@@ -1480,6 +1516,7 @@ static int qcom_pcie_probe(struct platfo + struct pcie_port *pp; + struct dw_pcie *pci; + struct qcom_pcie *pcie; ++ const struct qcom_pcie_cfg *pcie_cfg; + int ret; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); +@@ -1501,7 +1538,13 @@ static int qcom_pcie_probe(struct platfo + + pcie->pci = pci; + +- pcie->ops = of_device_get_match_data(dev); ++ pcie_cfg = of_device_get_match_data(dev); ++ if (!pcie_cfg || !pcie_cfg->ops) { ++ dev_err(dev, "Invalid platform data\n"); ++ return -EINVAL; ++ } ++ ++ pcie->ops = pcie_cfg->ops; + + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); + if (IS_ERR(pcie->reset)) { +@@ -1557,16 +1600,17 @@ err_pm_runtime_put: + } + + static const struct of_device_id qcom_pcie_match[] = { +- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, +- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, +- { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, +- { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, +- { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, +- { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, +- { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, ++ { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, ++ { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, ++ { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, ++ { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, ++ { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, ++ { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, ++ { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, ++ { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch new file mode 100644 index 0000000000..6881ed6d25 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch @@ -0,0 +1,220 @@ +From a7d96ca20847ade9f29cff4521f43b8ae968b3df Mon Sep 17 00:00:00 2001 +From: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> +Date: Tue, 21 Jun 2022 11:54:54 +0300 +Subject: [PATCH] PCI: qcom: Add IPQ60xx support + +IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that +platform. + +The code is based on downstream[1] Codeaurora kernel v5.4 (branch +win.linuxopenwrt.2.0). + +Split out the DBI registers access part from .init into .post_init. DBI +registers are only accessible after phy_power_on(). + +[1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ + +Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il +Tested-by: Robert Marko <robert.marko@sartura.hr> +Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> +Signed-off-by: Baruch Siach <baruch.siach@siklu.com> +Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> +Reviewed-by: Rob Herring <robh@kernel.org> +Reviewed-by: Johan Hovold <johan+linaro@kernel.org> +Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> +--- + drivers/pci/controller/dwc/pcie-designware.h | 1 + + drivers/pci/controller/dwc/pcie-qcom.c | 130 +++++++++++++++++++ + 2 files changed, 131 insertions(+) + +--- a/drivers/pci/controller/dwc/pcie-designware.h ++++ b/drivers/pci/controller/dwc/pcie-designware.h +@@ -76,6 +76,7 @@ + + #define GEN3_RELATED_OFF 0x890 + #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) ++#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) + #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) + #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 + #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -52,6 +52,10 @@ + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 + #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C + #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 ++#define AHB_CLK_EN BIT(0) ++#define MSTR_AXI_CLK_EN BIT(1) ++#define BYPASS BIT(4) ++ + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 + #define PCIE20_PARF_LTSSM 0x1B0 +@@ -181,6 +185,11 @@ struct qcom_pcie_resources_2_7_0 { + struct clk *pipe_clk; + }; + ++struct qcom_pcie_resources_2_9_0 { ++ struct clk_bulk_data clks[5]; ++ struct reset_control *rst; ++}; ++ + union qcom_pcie_resources { + struct qcom_pcie_resources_1_0_0 v1_0_0; + struct qcom_pcie_resources_2_1_0 v2_1_0; +@@ -188,6 +197,7 @@ union qcom_pcie_resources { + struct qcom_pcie_resources_2_3_3 v2_3_3; + struct qcom_pcie_resources_2_4_0 v2_4_0; + struct qcom_pcie_resources_2_7_0 v2_7_0; ++ struct qcom_pcie_resources_2_9_0 v2_9_0; + }; + + struct qcom_pcie; +@@ -1282,6 +1292,112 @@ static void qcom_pcie_post_deinit_2_7_0( + clk_disable_unprepare(res->pipe_clk); + } + ++static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ struct dw_pcie *pci = pcie->pci; ++ struct device *dev = pci->dev; ++ int ret; ++ ++ res->clks[0].id = "iface"; ++ res->clks[1].id = "axi_m"; ++ res->clks[2].id = "axi_s"; ++ res->clks[3].id = "axi_bridge"; ++ res->clks[4].id = "rchng"; ++ ++ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); ++ if (ret < 0) ++ return ret; ++ ++ res->rst = devm_reset_control_array_get_exclusive(dev); ++ if (IS_ERR(res->rst)) ++ return PTR_ERR(res->rst); ++ ++ return 0; ++} ++ ++static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ ++ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); ++} ++ ++static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ struct device *dev = pcie->pci->dev; ++ int ret; ++ ++ ret = reset_control_assert(res->rst); ++ if (ret) { ++ dev_err(dev, "reset assert failed (%d)\n", ret); ++ return ret; ++ } ++ ++ /* ++ * Delay periods before and after reset deassert are working values ++ * from downstream Codeaurora kernel ++ */ ++ usleep_range(2000, 2500); ++ ++ ret = reset_control_deassert(res->rst); ++ if (ret) { ++ dev_err(dev, "reset deassert failed (%d)\n", ret); ++ return ret; ++ } ++ ++ usleep_range(2000, 2500); ++ ++ return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); ++} ++ ++static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct dw_pcie *pci = pcie->pci; ++ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); ++ u32 val; ++ int i; ++ ++ writel(SLV_ADDR_SPACE_SZ, ++ pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); ++ ++ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); ++ val &= ~BIT(0); ++ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); ++ ++ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); ++ ++ writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); ++ writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, ++ pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); ++ writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS | ++ GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, ++ pci->dbi_base + GEN3_RELATED_OFF); ++ ++ writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS | ++ SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | ++ AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, ++ pcie->parf + PCIE20_PARF_SYS_CTRL); ++ ++ writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); ++ ++ dw_pcie_dbi_ro_wr_en(pci); ++ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); ++ ++ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); ++ val &= ~PCI_EXP_LNKCAP_ASPMS; ++ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); ++ ++ writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + ++ PCI_EXP_DEVCTL2); ++ ++ for (i = 0; i < 256; i++) ++ writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 * i)); ++ ++ return 0; ++} ++ + static int qcom_pcie_link_up(struct dw_pcie *pci) + { + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); +@@ -1473,6 +1589,15 @@ static const struct qcom_pcie_ops ops_1_ + .config_sid = qcom_pcie_config_sid_sm8250, + }; + ++/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ ++static const struct qcom_pcie_ops ops_2_9_0 = { ++ .get_resources = qcom_pcie_get_resources_2_9_0, ++ .init = qcom_pcie_init_2_9_0, ++ .post_init = qcom_pcie_post_init_2_9_0, ++ .deinit = qcom_pcie_deinit_2_9_0, ++ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, ++}; ++ + static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, + }; +@@ -1505,6 +1630,10 @@ static const struct qcom_pcie_cfg sc7280 + .ops = &ops_1_9_0, + }; + ++static const struct qcom_pcie_cfg ipq6018_cfg = { ++ .ops = &ops_2_9_0, ++}; ++ + static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +@@ -1611,6 +1740,7 @@ static const struct of_device_id qcom_pc + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, ++ { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch b/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch new file mode 100644 index 0000000000..5300c36dce --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch @@ -0,0 +1,288 @@ +From e8e7ce92a49dc87f0d006cfbfe419b8e0b25476d Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson <bjorn.andersson@linaro.org> +Date: Tue, 26 Apr 2022 14:21:36 -0700 +Subject: [PATCH] clk: qcom: rcg2: Cache CFG register updates for parked RCGs + +As GDSCs are turned on and off some associated clocks are momentarily +enabled for house keeping purposes. For this, and similar, purposes the +"shared RCGs" will park the RCG on a source clock which is known to be +available. +When the RCG is parked, a safe clock source will be selected and +committed, then the original source would be written back and upon enable +the change back to the unparked source would be committed. + +But starting with SM8350 this fails, as the value in CFG is committed by +the GDSC handshake and without a ticking parent the GDSC enablement will +time out. + +This becomes a concrete problem if the runtime supended state of a +device includes disabling such rcg's parent clock. As the device +attempts to power up the domain again the rcg will fail to enable and +hence the GDSC enablement will fail, preventing the device from +returning from the suspended state. + +This can be seen in e.g. the display stack during probe on SM8350. + +To avoid this problem, the software needs to ensure that the RCG is +configured to a active parent clock while it is disabled. This is done +by caching the CFG register content while the shared RCG is parked on +this safe source. + +Writes to M, N and D registers are committed as they are requested. New +helpers for get_parent() and recalc_rate() are extracted from their +previous implementations and __clk_rcg2_configure() is modified to allow +it to operate on the cached value. + +Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed") +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Reviewed-by: Stephen Boyd <sboyd@kernel.org> +Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org +--- + drivers/clk/qcom/clk-rcg.h | 2 + + drivers/clk/qcom/clk-rcg2.c | 126 ++++++++++++++++++++++++++++-------- + 2 files changed, 101 insertions(+), 27 deletions(-) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -139,6 +139,7 @@ extern const struct clk_ops clk_dyn_rcg_ + * @freq_tbl: frequency table + * @clkr: regmap clock handle + * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG ++ * @parked_cfg: cached value of the CFG register for parked RCGs + */ + struct clk_rcg2 { + u32 cmd_rcgr; +@@ -149,6 +150,7 @@ struct clk_rcg2 { + const struct freq_tbl *freq_tbl; + struct clk_regmap clkr; + u8 cfg_off; ++ u32 parked_cfg; + }; + + #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr) +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -74,16 +74,11 @@ static int clk_rcg2_is_enabled(struct cl + return (cmd & CMD_ROOT_OFF) == 0; + } + +-static u8 clk_rcg2_get_parent(struct clk_hw *hw) ++static u8 __clk_rcg2_get_parent(struct clk_hw *hw, u32 cfg) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + int num_parents = clk_hw_get_num_parents(hw); +- u32 cfg; +- int i, ret; +- +- ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); +- if (ret) +- goto err; ++ int i; + + cfg &= CFG_SRC_SEL_MASK; + cfg >>= CFG_SRC_SEL_SHIFT; +@@ -92,12 +87,27 @@ static u8 clk_rcg2_get_parent(struct clk + if (cfg == rcg->parent_map[i].cfg) + return i; + +-err: + pr_debug("%s: Clock %s has invalid parent, using default.\n", + __func__, clk_hw_get_name(hw)); + return 0; + } + ++static u8 clk_rcg2_get_parent(struct clk_hw *hw) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ u32 cfg; ++ int ret; ++ ++ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ if (ret) { ++ pr_debug("%s: Unable to read CFG register for %s\n", ++ __func__, clk_hw_get_name(hw)); ++ return 0; ++ } ++ ++ return __clk_rcg2_get_parent(hw, cfg); ++} ++ + static int update_config(struct clk_rcg2 *rcg) + { + int count, ret; +@@ -164,12 +174,10 @@ calc_rate(unsigned long rate, u32 m, u32 + } + + static unsigned long +-clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++__clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, u32 cfg) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); +- u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask; +- +- regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ u32 hid_div, m = 0, n = 0, mode = 0, mask; + + if (rcg->mnd_width) { + mask = BIT(rcg->mnd_width) - 1; +@@ -190,6 +198,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, + return calc_rate(parent_rate, m, n, mode, hid_div); + } + ++static unsigned long ++clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ u32 cfg; ++ ++ regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ ++ return __clk_rcg2_recalc_rate(hw, parent_rate, cfg); ++} ++ + static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, + struct clk_rate_request *req, + enum freq_policy policy) +@@ -263,7 +282,8 @@ static int clk_rcg2_determine_floor_rate + return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR); + } + +-static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) ++static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f, ++ u32 *_cfg) + { + u32 cfg, mask, d_val, not2d_val, n_minus_m; + struct clk_hw *hw = &rcg->clkr.hw; +@@ -305,15 +325,27 @@ static int __clk_rcg2_configure(struct c + cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; + if (rcg->mnd_width && f->n && (f->m != f->n)) + cfg |= CFG_MODE_DUAL_EDGE; +- return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), +- mask, cfg); ++ ++ *_cfg &= ~mask; ++ *_cfg |= cfg; ++ ++ return 0; + } + + static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) + { ++ u32 cfg; + int ret; + +- ret = __clk_rcg2_configure(rcg, f); ++ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ if (ret) ++ return ret; ++ ++ ret = __clk_rcg2_configure(rcg, f, &cfg); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), cfg); + if (ret) + return ret; + +@@ -994,11 +1026,12 @@ static int clk_rcg2_shared_set_rate(stru + return -EINVAL; + + /* +- * In case clock is disabled, update the CFG, M, N and D registers +- * and don't hit the update bit of CMD register. ++ * In case clock is disabled, update the M, N and D registers, cache ++ * the CFG value in parked_cfg and don't hit the update bit of CMD ++ * register. + */ +- if (!__clk_is_enabled(hw->clk)) +- return __clk_rcg2_configure(rcg, f); ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_configure(rcg, f, &rcg->parked_cfg); + + return clk_rcg2_shared_force_enable_clear(hw, f); + } +@@ -1022,6 +1055,11 @@ static int clk_rcg2_shared_enable(struct + if (ret) + return ret; + ++ /* Write back the stored configuration corresponding to current rate */ ++ ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, rcg->parked_cfg); ++ if (ret) ++ return ret; ++ + ret = update_config(rcg); + if (ret) + return ret; +@@ -1032,13 +1070,12 @@ static int clk_rcg2_shared_enable(struct + static void clk_rcg2_shared_disable(struct clk_hw *hw) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); +- u32 cfg; + + /* + * Store current configuration as switching to safe source would clear + * the SRC and DIV of CFG register + */ +- regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg); ++ regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &rcg->parked_cfg); + + /* + * Park the RCG at a safe configuration - sourced off of safe source. +@@ -1056,17 +1093,52 @@ static void clk_rcg2_shared_disable(stru + update_config(rcg); + + clk_rcg2_clear_force_enable(hw); ++} + +- /* Write back the stored configuration corresponding to current rate */ +- regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg); ++static u8 clk_rcg2_shared_get_parent(struct clk_hw *hw) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked use the cached cfg instead */ ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_get_parent(hw, rcg->parked_cfg); ++ ++ return clk_rcg2_get_parent(hw); ++} ++ ++static int clk_rcg2_shared_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked only update the cached cfg */ ++ if (!clk_hw_is_enabled(hw)) { ++ rcg->parked_cfg &= ~CFG_SRC_SEL_MASK; ++ rcg->parked_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; ++ ++ return 0; ++ } ++ ++ return clk_rcg2_set_parent(hw, index); ++} ++ ++static unsigned long ++clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked use the cached cfg instead */ ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_recalc_rate(hw, parent_rate, rcg->parked_cfg); ++ ++ return clk_rcg2_recalc_rate(hw, parent_rate); + } + + const struct clk_ops clk_rcg2_shared_ops = { + .enable = clk_rcg2_shared_enable, + .disable = clk_rcg2_shared_disable, +- .get_parent = clk_rcg2_get_parent, +- .set_parent = clk_rcg2_set_parent, +- .recalc_rate = clk_rcg2_recalc_rate, ++ .get_parent = clk_rcg2_shared_get_parent, ++ .set_parent = clk_rcg2_shared_set_parent, ++ .recalc_rate = clk_rcg2_shared_recalc_rate, + .determine_rate = clk_rcg2_determine_rate, + .set_rate = clk_rcg2_shared_set_rate, + .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent, diff --git a/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch b/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch new file mode 100644 index 0000000000..3319f431ba --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch @@ -0,0 +1,207 @@ +From 77faa07c185c969e742cbb3e6aa487a11b0b616c Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Date: Tue, 30 Aug 2022 09:57:42 +0300 +Subject: [PATCH] dt-bindings: arm: qcom: document qcom,msm-id and + qcom,board-id + +The top level qcom,msm-id and qcom,board-id properties are utilized by +bootloaders on Qualcomm MSM platforms to determine which device tree +should be used and passed to the kernel. + +The commit b32e592d3c28 ("devicetree: bindings: Document qcom board +compatible format") from 2015 was a consensus during discussion about +upstreaming qcom,msm-id and qcom,board-id fields. There are however still +problems with that consensus: +1. It was reached 7 years ago but it turned out its implementation did + not reach all possible products. + +2. Initially additional tool (dtbTool) was needed for parsing these + fields to create a QCDT image consisting of multiple DTBs, later the + bootloaders were improved and they use these qcom,msm-id and + qcom,board-id properties directly. + +3. Extracting relevant information from the board compatible requires + this additional tool (dtbTool), which makes the build process more + complicated and not easily reproducible (DTBs are modified after the + kernel build). + +4. Some versions of Qualcomm bootloaders expect these properties even + when booting with a single DTB. The community is stuck with these + bootloaders thus they require properties in the DTBs. + +Since several upstreamed Qualcomm SoC-based boards require these +properties to properly boot and the properties are reportedly used by +bootloaders, document them along with the bindings header with constants +used by: bootloader, some DTS and socinfo driver. + +Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/ +Co-developed-by: Kumar Gala <galak@codeaurora.org> +Signed-off-by: Kumar Gala <galak@codeaurora.org> +Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Reviewed-by: Rob Herring <robh@kernel.org> +Signed-off-by: Bjorn Andersson <andersson@kernel.org> +Link: https://lore.kernel.org/r/20220830065744.161163-2-krzysztof.kozlowski@linaro.org +--- + include/dt-bindings/arm/qcom,ids.h | 155 +++++++++++++++++++++++++++++ + 1 file changed, 155 insertions(+) + create mode 100644 include/dt-bindings/arm/qcom,ids.h + +--- /dev/null ++++ b/include/dt-bindings/arm/qcom,ids.h +@@ -0,0 +1,155 @@ ++/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * Copyright (c) 2022 Linaro Ltd ++ * Author: Krzysztof Kozlowski <krzk@kernel.org> based on previous work of Kumar Gala. ++ */ ++#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H ++#define _DT_BINDINGS_ARM_QCOM_IDS_H ++ ++/* ++ * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for ++ * older chipsets (qcom,msm-id) and in socinfo driver: ++ */ ++#define QCOM_ID_MSM8960 87 ++#define QCOM_ID_APQ8064 109 ++#define QCOM_ID_MSM8660A 122 ++#define QCOM_ID_MSM8260A 123 ++#define QCOM_ID_APQ8060A 124 ++#define QCOM_ID_MSM8974 126 ++#define QCOM_ID_MPQ8064 130 ++#define QCOM_ID_MSM8960AB 138 ++#define QCOM_ID_APQ8060AB 139 ++#define QCOM_ID_MSM8260AB 140 ++#define QCOM_ID_MSM8660AB 141 ++#define QCOM_ID_MSM8626 145 ++#define QCOM_ID_MSM8610 147 ++#define QCOM_ID_APQ8064AB 153 ++#define QCOM_ID_MSM8226 158 ++#define QCOM_ID_MSM8526 159 ++#define QCOM_ID_MSM8110 161 ++#define QCOM_ID_MSM8210 162 ++#define QCOM_ID_MSM8810 163 ++#define QCOM_ID_MSM8212 164 ++#define QCOM_ID_MSM8612 165 ++#define QCOM_ID_MSM8112 166 ++#define QCOM_ID_MSM8225Q 168 ++#define QCOM_ID_MSM8625Q 169 ++#define QCOM_ID_MSM8125Q 170 ++#define QCOM_ID_APQ8064AA 172 ++#define QCOM_ID_APQ8084 178 ++#define QCOM_ID_APQ8074 184 ++#define QCOM_ID_MSM8274 185 ++#define QCOM_ID_MSM8674 186 ++#define QCOM_ID_MSM8974PRO_AC 194 ++#define QCOM_ID_MSM8126 198 ++#define QCOM_ID_APQ8026 199 ++#define QCOM_ID_MSM8926 200 ++#define QCOM_ID_MSM8326 205 ++#define QCOM_ID_MSM8916 206 ++#define QCOM_ID_MSM8994 207 ++#define QCOM_ID_APQ8074PRO_AA 208 ++#define QCOM_ID_APQ8074PRO_AB 209 ++#define QCOM_ID_APQ8074PRO_AC 210 ++#define QCOM_ID_MSM8274PRO_AA 211 ++#define QCOM_ID_MSM8274PRO_AB 212 ++#define QCOM_ID_MSM8274PRO_AC 213 ++#define QCOM_ID_MSM8674PRO_AA 214 ++#define QCOM_ID_MSM8674PRO_AB 215 ++#define QCOM_ID_MSM8674PRO_AC 216 ++#define QCOM_ID_MSM8974PRO_AA 217 ++#define QCOM_ID_MSM8974PRO_AB 218 ++#define QCOM_ID_APQ8028 219 ++#define QCOM_ID_MSM8128 220 ++#define QCOM_ID_MSM8228 221 ++#define QCOM_ID_MSM8528 222 ++#define QCOM_ID_MSM8628 223 ++#define QCOM_ID_MSM8928 224 ++#define QCOM_ID_MSM8510 225 ++#define QCOM_ID_MSM8512 226 ++#define QCOM_ID_MSM8936 233 ++#define QCOM_ID_MSM8939 239 ++#define QCOM_ID_APQ8036 240 ++#define QCOM_ID_APQ8039 241 ++#define QCOM_ID_MSM8996 246 ++#define QCOM_ID_APQ8016 247 ++#define QCOM_ID_MSM8216 248 ++#define QCOM_ID_MSM8116 249 ++#define QCOM_ID_MSM8616 250 ++#define QCOM_ID_MSM8992 251 ++#define QCOM_ID_APQ8094 253 ++#define QCOM_ID_MDM9607 290 ++#define QCOM_ID_APQ8096 291 ++#define QCOM_ID_MSM8998 292 ++#define QCOM_ID_MSM8953 293 ++#define QCOM_ID_MDM8207 296 ++#define QCOM_ID_MDM9207 297 ++#define QCOM_ID_MDM9307 298 ++#define QCOM_ID_MDM9628 299 ++#define QCOM_ID_APQ8053 304 ++#define QCOM_ID_MSM8996SG 305 ++#define QCOM_ID_MSM8996AU 310 ++#define QCOM_ID_APQ8096AU 311 ++#define QCOM_ID_APQ8096SG 312 ++#define QCOM_ID_SDM660 317 ++#define QCOM_ID_SDM630 318 ++#define QCOM_ID_APQ8098 319 ++#define QCOM_ID_SDM845 321 ++#define QCOM_ID_MDM9206 322 ++#define QCOM_ID_IPQ8074 323 ++#define QCOM_ID_SDA660 324 ++#define QCOM_ID_SDM658 325 ++#define QCOM_ID_SDA658 326 ++#define QCOM_ID_SDA630 327 ++#define QCOM_ID_SDM450 338 ++#define QCOM_ID_SDA845 341 ++#define QCOM_ID_IPQ8072 342 ++#define QCOM_ID_IPQ8076 343 ++#define QCOM_ID_IPQ8078 344 ++#define QCOM_ID_SDM636 345 ++#define QCOM_ID_SDA636 346 ++#define QCOM_ID_SDM632 349 ++#define QCOM_ID_SDA632 350 ++#define QCOM_ID_SDA450 351 ++#define QCOM_ID_SM8250 356 ++#define QCOM_ID_IPQ8070 375 ++#define QCOM_ID_IPQ8071 376 ++#define QCOM_ID_IPQ8072A 389 ++#define QCOM_ID_IPQ8074A 390 ++#define QCOM_ID_IPQ8076A 391 ++#define QCOM_ID_IPQ8078A 392 ++#define QCOM_ID_SM6125 394 ++#define QCOM_ID_IPQ8070A 395 ++#define QCOM_ID_IPQ8071A 396 ++#define QCOM_ID_IPQ6018 402 ++#define QCOM_ID_IPQ6028 403 ++#define QCOM_ID_IPQ6000 421 ++#define QCOM_ID_IPQ6010 422 ++#define QCOM_ID_SC7180 425 ++#define QCOM_ID_SM6350 434 ++#define QCOM_ID_SM8350 439 ++#define QCOM_ID_SC8280XP 449 ++#define QCOM_ID_IPQ6005 453 ++#define QCOM_ID_QRB5165 455 ++#define QCOM_ID_SM8450 457 ++#define QCOM_ID_SM7225 459 ++#define QCOM_ID_SA8295P 460 ++#define QCOM_ID_SA8540P 461 ++#define QCOM_ID_SM8450_2 480 ++#define QCOM_ID_SM8450_3 482 ++#define QCOM_ID_SC7280 487 ++#define QCOM_ID_SC7180P 495 ++#define QCOM_ID_SM6375 507 ++ ++/* ++ * The board type and revision information, used by Qualcomm bootloaders and ++ * DTS for older chipsets (qcom,board-id): ++ */ ++#define QCOM_BOARD_ID(a, major, minor) \ ++ (((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a) ++ ++#define QCOM_BOARD_ID_MTP 8 ++#define QCOM_BOARD_ID_DRAGONBOARD 10 ++#define QCOM_BOARD_ID_SBC 24 ++ ++#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */ diff --git a/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch b/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch new file mode 100644 index 0000000000..5713775948 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch @@ -0,0 +1,203 @@ +From 032be4f49dda786fea9e1501212f6cd09a7ded96 Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Thu, 3 Nov 2022 14:49:43 +0100 +Subject: [PATCH] clk: qcom: clk-rcg2: introduce support for multiple conf for + same freq + +Some RCG frequency can be reached by multiple configuration. + +We currently declare multiple configuration for the same frequency but +that is not supported and always the first configuration will be taken. + +These multiple configuration are needed as based on the current parent +configuration, it may be needed to use a different configuration to +reach the same frequency. + +To handle this introduce 2 new macro, FM and C. + +- FM is used to declare an empty freq_tbl with just the frequency and an + array of confs to insert all the config for the provided frequency. + +- C is used to declare a fre_conf where src, pre_div, m and n are + provided. + +The driver is changed to handle this special freq_tbl and select the +correct config by calculating the final rate and deciding based on the +one that is less different than the requested one. + +Tested-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +--- + drivers/clk/qcom/clk-rcg.h | 14 ++++++- + drivers/clk/qcom/clk-rcg2.c | 84 +++++++++++++++++++++++++++++++++---- + 2 files changed, 88 insertions(+), 10 deletions(-) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -7,7 +7,17 @@ + #include <linux/clk-provider.h> + #include "clk-regmap.h" + +-#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } ++#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n), 0, NULL } ++ ++#define FM(_f, _confs) { .freq = (_f), .confs_num = ARRAY_SIZE(_confs), .confs = (_confs) } ++#define C(s, h, m, n) { (s), (2 * (h) - 1), (m), (n) } ++ ++struct freq_conf { ++ u8 src; ++ u8 pre_div; ++ u16 m; ++ u16 n; ++}; + + struct freq_tbl { + unsigned long freq; +@@ -15,6 +25,8 @@ struct freq_tbl { + u8 pre_div; + u16 m; + u16 n; ++ int confs_num; ++ const struct freq_conf *confs; + }; + + /** +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -209,11 +209,60 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, + return __clk_rcg2_recalc_rate(hw, parent_rate, cfg); + } + ++static void ++clk_rcg2_select_conf(struct clk_hw *hw, struct freq_tbl *f_tbl, ++ const struct freq_tbl *f, unsigned long req_rate) ++{ ++ unsigned long best_rate = 0, parent_rate, rate; ++ const struct freq_conf *conf, *best_conf; ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ struct clk_hw *p; ++ int index, i; ++ ++ /* Search in each provided config the one that is near the wanted rate */ ++ for (i = 0, conf = f->confs; i < f->confs_num; i++, conf++) { ++ index = qcom_find_src_index(hw, rcg->parent_map, conf->src); ++ if (index < 0) ++ continue; ++ ++ p = clk_hw_get_parent_by_index(hw, index); ++ if (!p) ++ continue; ++ ++ parent_rate = clk_hw_get_rate(p); ++ rate = calc_rate(parent_rate, conf->n, conf->m, conf->n, conf->pre_div); ++ ++ if (rate == req_rate) { ++ best_conf = conf; ++ break; ++ } ++ ++ if (abs(req_rate - rate) < abs(best_rate - rate)) { ++ best_rate = rate; ++ best_conf = conf; ++ } ++ } ++ ++ /* ++ * Very unlikely. ++ * Force the first conf if we can't find a correct config. ++ */ ++ if (unlikely(i == f->confs_num)) ++ best_conf = f->confs; ++ ++ /* Apply the config */ ++ f_tbl->src = best_conf->src; ++ f_tbl->pre_div = best_conf->pre_div; ++ f_tbl->m = best_conf->m; ++ f_tbl->n = best_conf->n; ++} ++ + static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, + struct clk_rate_request *req, + enum freq_policy policy) + { + unsigned long clk_flags, rate = req->rate; ++ struct freq_tbl f_tbl; + struct clk_hw *p; + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + int index; +@@ -232,7 +281,15 @@ static int _freq_tbl_determine_rate(stru + if (!f) + return -EINVAL; + +- index = qcom_find_src_index(hw, rcg->parent_map, f->src); ++ f_tbl = *f; ++ /* ++ * A single freq may be reached by multiple configuration. ++ * Try to find the bast one if we have this kind of freq_table. ++ */ ++ if (f->confs) ++ clk_rcg2_select_conf(hw, &f_tbl, f, rate); ++ ++ index = qcom_find_src_index(hw, rcg->parent_map, f_tbl.src); + if (index < 0) + return index; + +@@ -242,18 +299,18 @@ static int _freq_tbl_determine_rate(stru + return -EINVAL; + + if (clk_flags & CLK_SET_RATE_PARENT) { +- rate = f->freq; +- if (f->pre_div) { ++ rate = f_tbl.freq; ++ if (f_tbl.pre_div) { + if (!rate) + rate = req->rate; + rate /= 2; +- rate *= f->pre_div + 1; ++ rate *= f_tbl.pre_div + 1; + } + +- if (f->n) { ++ if (f_tbl.n) { + u64 tmp = rate; +- tmp = tmp * f->n; +- do_div(tmp, f->m); ++ tmp = tmp * f_tbl.n; ++ do_div(tmp, f_tbl.m); + rate = tmp; + } + } else { +@@ -261,7 +318,7 @@ static int _freq_tbl_determine_rate(stru + } + req->best_parent_hw = p; + req->best_parent_rate = rate; +- req->rate = f->freq; ++ req->rate = f_tbl.freq; + + return 0; + } +@@ -357,6 +414,7 @@ static int __clk_rcg2_set_rate(struct cl + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + const struct freq_tbl *f; ++ struct freq_tbl f_tbl; + + switch (policy) { + case FLOOR: +@@ -372,7 +430,15 @@ static int __clk_rcg2_set_rate(struct cl + if (!f) + return -EINVAL; + +- return clk_rcg2_configure(rcg, f); ++ f_tbl = *f; ++ /* ++ * A single freq may be reached by multiple configuration. ++ * Try to find the best one if we have this kind of freq_table. ++ */ ++ if (f->confs) ++ clk_rcg2_select_conf(hw, &f_tbl, f, rate); ++ ++ return clk_rcg2_configure(rcg, &f_tbl); + } + + static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch b/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch new file mode 100644 index 0000000000..32fb2d9d87 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch @@ -0,0 +1,129 @@ +From f778553f296792f4d1e8b3552603ad6116ea3eb3 Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Thu, 3 Nov 2022 14:49:44 +0100 +Subject: [PATCH] clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple + conf + +Rework nss_port5/6 to use the new multiple configuration implementation +and correctly fix the clocks for these port under some corner case. + +This is particularly relevant for device that have 2.5G or 10G port +connected to port5 or port 6 on ipq8074. As the parent are shared +across multiple port it may be required to select the correct +configuration to accomplish the desired clock. Without this patch such +port doesn't work in some specific ethernet speed as the clock will be +set to the wrong frequency as we just select the first configuration for +the related frequency instead of selecting the best one. + +Tested-by: Robert Marko <robimarko@gmail.com> # ipq8074 Qnap QHora-301W +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +--- + drivers/clk/qcom/gcc-ipq8074.c | 64 +++++++++++++++++++++++++--------- + 1 file changed, 48 insertions(+), 16 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -1682,13 +1682,21 @@ static struct clk_regmap_div nss_port4_t + }, + }; + ++static const struct freq_conf ftbl_nss_port5_rx_clk_src_25[] = { ++ C(P_UNIPHY1_RX, 12.5, 0, 0), ++ C(P_UNIPHY0_RX, 5, 0, 0), ++}; ++ ++static const struct freq_conf ftbl_nss_port5_rx_clk_src_125[] = { ++ C(P_UNIPHY1_RX, 2.5, 0, 0), ++ C(P_UNIPHY0_RX, 1, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port5_rx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY1_RX, 12.5, 0, 0), +- F(25000000, P_UNIPHY0_RX, 5, 0, 0), ++ FM(25000000, ftbl_nss_port5_rx_clk_src_25), + F(78125000, P_UNIPHY1_RX, 4, 0, 0), +- F(125000000, P_UNIPHY1_RX, 2.5, 0, 0), +- F(125000000, P_UNIPHY0_RX, 1, 0, 0), ++ FM(125000000, ftbl_nss_port5_rx_clk_src_125), + F(156250000, P_UNIPHY1_RX, 2, 0, 0), + F(312500000, P_UNIPHY1_RX, 1, 0, 0), + { } +@@ -1744,13 +1752,21 @@ static struct clk_regmap_div nss_port5_r + }, + }; + ++static struct freq_conf ftbl_nss_port5_tx_clk_src_25[] = { ++ C(P_UNIPHY1_TX, 12.5, 0, 0), ++ C(P_UNIPHY0_TX, 5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port5_tx_clk_src_125[] = { ++ C(P_UNIPHY1_TX, 2.5, 0, 0), ++ C(P_UNIPHY0_TX, 1, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port5_tx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY1_TX, 12.5, 0, 0), +- F(25000000, P_UNIPHY0_TX, 5, 0, 0), ++ FM(25000000, ftbl_nss_port5_tx_clk_src_25), + F(78125000, P_UNIPHY1_TX, 4, 0, 0), +- F(125000000, P_UNIPHY1_TX, 2.5, 0, 0), +- F(125000000, P_UNIPHY0_TX, 1, 0, 0), ++ FM(125000000, ftbl_nss_port5_tx_clk_src_125), + F(156250000, P_UNIPHY1_TX, 2, 0, 0), + F(312500000, P_UNIPHY1_TX, 1, 0, 0), + { } +@@ -1806,13 +1822,21 @@ static struct clk_regmap_div nss_port5_t + }, + }; + ++static struct freq_conf ftbl_nss_port6_rx_clk_src_25[] = { ++ C(P_UNIPHY2_RX, 5, 0, 0), ++ C(P_UNIPHY2_RX, 12.5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port6_rx_clk_src_125[] = { ++ C(P_UNIPHY2_RX, 1, 0, 0), ++ C(P_UNIPHY2_RX, 2.5, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port6_rx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY2_RX, 5, 0, 0), +- F(25000000, P_UNIPHY2_RX, 12.5, 0, 0), ++ FM(25000000, ftbl_nss_port6_rx_clk_src_25), + F(78125000, P_UNIPHY2_RX, 4, 0, 0), +- F(125000000, P_UNIPHY2_RX, 1, 0, 0), +- F(125000000, P_UNIPHY2_RX, 2.5, 0, 0), ++ FM(125000000, ftbl_nss_port6_rx_clk_src_125), + F(156250000, P_UNIPHY2_RX, 2, 0, 0), + F(312500000, P_UNIPHY2_RX, 1, 0, 0), + { } +@@ -1863,13 +1887,21 @@ static struct clk_regmap_div nss_port6_r + }, + }; + ++static struct freq_conf ftbl_nss_port6_tx_clk_src_25[] = { ++ C(P_UNIPHY2_TX, 5, 0, 0), ++ C(P_UNIPHY2_TX, 12.5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port6_tx_clk_src_125[] = { ++ C(P_UNIPHY2_TX, 1, 0, 0), ++ C(P_UNIPHY2_TX, 2.5, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port6_tx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY2_TX, 5, 0, 0), +- F(25000000, P_UNIPHY2_TX, 12.5, 0, 0), ++ FM(25000000, ftbl_nss_port6_tx_clk_src_25), + F(78125000, P_UNIPHY2_TX, 4, 0, 0), +- F(125000000, P_UNIPHY2_TX, 1, 0, 0), +- F(125000000, P_UNIPHY2_TX, 2.5, 0, 0), ++ FM(125000000, ftbl_nss_port6_tx_clk_src_125), + F(156250000, P_UNIPHY2_TX, 2, 0, 0), + F(312500000, P_UNIPHY2_TX, 1, 0, 0), + { } diff --git a/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch b/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch new file mode 100644 index 0000000000..af53c077ff --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch @@ -0,0 +1,70 @@ +From ad2d07f71739351eeea1d8a120c0918e2c4b265f Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 22 Dec 2021 12:23:34 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add reserved memory nodes + +IPQ8074 has multiple reserved memory ranges, if they are not defined +then weird things tend to happen, board hangs and resets when PCI or +WLAN is used etc. + +So, to avoid all of that add the reserved memory nodes from the downstream +5.4 kernel from QCA. +This is their default layout meant for devices with 1GB of RAM, but +devices with lower ammounts can override the Q6 node. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 35 +++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -85,6 +85,26 @@ + #size-cells = <2>; + ranges; + ++ nss@40000000 { ++ no-map; ++ reg = <0x0 0x40000000 0x0 0x01000000>; ++ }; ++ ++ tzapp_region: tzapp@4a400000 { ++ no-map; ++ reg = <0x0 0x4a400000 0x0 0x00200000>; ++ }; ++ ++ uboot@4a600000 { ++ no-map; ++ reg = <0x0 0x4a600000 0x0 0x00400000>; ++ }; ++ ++ sbl@4aa00000 { ++ no-map; ++ reg = <0x0 0x4aa00000 0x0 0x00100000>; ++ }; ++ + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x00100000>; +@@ -97,6 +117,21 @@ + no-map; + reg = <0x0 0x4ac00000 0x0 0x00400000>; + }; ++ ++ q6_region: wcnss@4b000000 { ++ no-map; ++ reg = <0x0 0x4b000000 0x0 0x05f00000>; ++ }; ++ ++ q6_etr_region: q6_etr_dump@50f00000 { ++ no-map; ++ reg = <0x0 0x50f00000 0x0 0x00100000>; ++ }; ++ ++ m3_dump_region: m3_dump@51000000 { ++ no-map; ++ reg = <0x0 0x51000000 0x0 0x100000>; ++ }; + }; + + firmware { diff --git a/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch b/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch new file mode 100644 index 0000000000..6eb282c7aa --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch @@ -0,0 +1,28 @@ +From 075b3ca8a4223742abc6da2406afe206d97f3d52 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:33 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY + +Serdes register space sizes are incorrect, update them to match the +actual sizes from downstream QCA 5.4 kernel. + +Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -277,9 +277,9 @@ + status = "disabled"; + + pcie_phy1: phy@8e200 { +- reg = <0x8e200 0x16c>, ++ reg = <0x8e200 0x130>, + <0x8e400 0x200>, +- <0x8e800 0x4f4>; ++ <0x8e800 0x1f8>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch b/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch new file mode 100644 index 0000000000..a44757a2e3 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch @@ -0,0 +1,55 @@ +From 6f49bc0ee169c90b5c26a1e3d27a4728142f0ddb Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:34 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY + +IPQ8074 comes in 2 silicon versions: +* v1 with 2x Gen2 PCIe ports and QMP PHY-s +* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s + +v2 is the final and production version that is actually supported by the +kernel, however it looks like PCIe related nodes were added for the v1 SoC. + +Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support +by fixing the Gen3 QMP PHY node first. + +Change the compatible to the Gen3 QMP PHY, correct the register space start +and size, add the missing misc PCS register space. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 ++++++++------- + 1 file changed, 8 insertions(+), 7 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -232,9 +232,9 @@ + status = "disabled"; + }; + +- pcie_qmp0: phy@86000 { +- compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x00086000 0x1c4>; ++ pcie_qmp0: phy@84000 { ++ compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; ++ reg = <0x00084000 0x1bc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -248,10 +248,11 @@ + "common"; + status = "disabled"; + +- pcie_phy0: phy@86200 { +- reg = <0x86200 0x16c>, +- <0x86400 0x200>, +- <0x86800 0x4f4>; ++ pcie_phy0: phy@84200 { ++ reg = <0x84200 0x16c>, ++ <0x84400 0x200>, ++ <0x84800 0x1f0>, ++ <0x84c00 0xf4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch b/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch new file mode 100644 index 0000000000..049109015d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch @@ -0,0 +1,29 @@ +From 52a48e8ed546339122983329410be801a2b9adf5 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:35 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges + +Current ranges property set in Gen2 PCIe node is incorrect, replace it +with the downstream 5.4 QCA kernel value. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -808,9 +808,9 @@ + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x10200000 0x10200000 +- 0 0x100000 /* downstream I/O */ +- 0x82000000 0 0x10300000 0x10300000 +- 0 0xd00000>; /* non-prefetchable memory */ ++ 0 0x10000>, /* downstream I/O */ ++ <0x82000000 0 0x10220000 0x10220000 ++ 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; diff --git a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch new file mode 100644 index 0000000000..0fa38394b9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch @@ -0,0 +1,24 @@ +From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:36 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed + +Add the generic 'max-link-speed' property to describe the Gen2 PCIe link +generation limit. +This allows the generic DWC code to configure the link speed correctly. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -801,6 +801,7 @@ + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; ++ max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + diff --git a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch new file mode 100644 index 0000000000..ae6b148210 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch @@ -0,0 +1,23 @@ +From 76893579a74e7e5c79f0c717d95d13f4cbbb5f4d Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sat, 24 Dec 2022 17:11:16 +0100 +Subject: [PATCH] PCI: qcom: Add support for IPQ8074 Gen3 port + +IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. +Add compatible for Gen3 port which uses the same controller as IPQ6018. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/pci/controller/dwc/pcie-qcom.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -1735,6 +1735,7 @@ static const struct of_device_id qcom_pc + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, ++ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &ipq6018_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, diff --git a/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch b/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch new file mode 100644 index 0000000000..fc4db15ea2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch @@ -0,0 +1,97 @@ +From 625c90a8266e432ea15e109123ca941062b63f76 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:40 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node + +IPQ8074 comes in 2 silicon versions: +* v1 with 2x Gen2 PCIe ports and QMP PHY-s +* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s + +v2 is the final and production version that is actually supported by the +kernel, however it looks like PCIe related nodes were added for the v1 SoC. + +Finish the PCIe fixup by using the correct compatible, adding missing ATU +register space, declaring max-link-speed, use correct ranges, add missing +clocks and resets. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 30 +++++++++++++++------------ + 1 file changed, 17 insertions(+), 13 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -854,16 +854,18 @@ + }; + + pcie0: pci@20000000 { +- compatible = "qcom,pcie-ipq8074"; ++ compatible = "qcom,pcie-ipq8074-gen3"; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, +- <0x00080000 0x2000>, ++ <0x20001000 0x1000>, ++ <0x00080000 0x4000>, + <0x20100000 0x1000>; +- reg-names = "dbi", "elbi", "parf", "config"; ++ reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; ++ max-link-speed = <3>; + #address-cells = <3>; + #size-cells = <2>; + +@@ -871,9 +873,9 @@ + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0x20200000 +- 0 0x100000 /* downstream I/O */ +- 0x82000000 0 0x20300000 0x20300000 +- 0 0xd00000>; /* non-prefetchable memory */ ++ 0 0x10000>, /* downstream I/O */ ++ <0x82000000 0 0x20220000 0x20220000 ++ 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +@@ -891,28 +893,30 @@ + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, +- <&gcc GCC_PCIE0_AHB_CLK>, +- <&gcc GCC_PCIE0_AUX_CLK>; +- ++ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, ++ <&gcc GCC_PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", +- "ahb", +- "aux"; ++ "axi_bridge", ++ "rchng"; ++ + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, +- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; ++ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, ++ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", +- "axi_m_sticky"; ++ "axi_m_sticky", ++ "axi_s_sticky"; + status = "disabled"; + }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch b/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch new file mode 100644 index 0000000000..9bd4a6fa75 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch @@ -0,0 +1,40 @@ +From 0311903940046649e20bd23bca837169eb4525dc Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:48:41 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock + names + +Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix +IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC +driver is relying on the old names to match them as they are being used as +the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk. + +This broke parenting as GCC could not find the parent clock, so fix it by +changing to the names that driver is expecting. + +Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -257,7 +257,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "pcie_0_pipe_clk"; ++ clock-output-names = "pcie20_phy0_pipe_clk"; + }; + }; + +@@ -285,7 +285,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "pcie_1_pipe_clk"; ++ clock-output-names = "pcie20_phy1_pipe_clk"; + }; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch b/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch new file mode 100644 index 0000000000..69d4126f76 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch @@ -0,0 +1,30 @@ +From 8a576b5bc9f0555d1d970cacabcaa24a3b74fa57 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:15:01 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to + GCC + +Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to +find them by matching globaly by name. + +If not passed directly, driver maintains backwards compatibility by then +falling back to global lookup. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -396,8 +396,8 @@ + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; +- clocks = <&xo>, <&sleep_clk>; +- clock-names = "xo", "sleep_clk"; ++ clocks = <&xo>, <&sleep_clk>, <&pcie_phy0>, <&pcie_phy1>; ++ clock-names = "xo", "sleep_clk", "pcie0_pipe", "pcie1_pipe"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch b/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch new file mode 100644 index 0000000000..d38e9dab31 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch @@ -0,0 +1,43 @@ +From fb1f6850be00d8dd8a54017be4c1336e224069ac Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 16 Nov 2022 22:26:25 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: use msi-parent for PCIe + +Instead of hardcoding the IRQ, simply use msi-parent instead. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -699,7 +699,7 @@ + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + ranges = <0 0xb00a000 0xffd>; + +- v2m@0 { ++ gic_v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xffd>; +@@ -813,8 +813,7 @@ + <0x82000000 0 0x10220000 0x10220000 + 0 0xfde0000>; /* non-prefetchable memory */ + +- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "msi"; ++ msi-parent = <&gic_v2m0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 +@@ -877,8 +876,7 @@ + <0x82000000 0 0x20220000 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ + +- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "msi"; ++ msi-parent = <&gic_v2m0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 diff --git a/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch b/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch new file mode 100644 index 0000000000..2124bfa3f1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch @@ -0,0 +1,155 @@ +From 125681433c8e526356947acf572fe8ca8ad32291 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:05 +0530 +Subject: [PATCH] remoteproc: qcom: Add PRNG proxy clock + +PRNG clock is needed by the secure PIL, support for the same +is added in subsequent patches. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 65 +++++++++++++++++++++-------- + 1 file changed, 47 insertions(+), 18 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -91,19 +91,6 @@ enum { + WCSS_QCS404, + }; + +-struct wcss_data { +- const char *firmware_name; +- unsigned int crash_reason_smem; +- u32 version; +- bool aon_reset_required; +- bool wcss_q6_reset_required; +- const char *ssr_name; +- const char *sysmon_name; +- int ssctl_id; +- const struct rproc_ops *ops; +- bool requires_force_stop; +-}; +- + struct q6v5_wcss { + struct device *dev; + +@@ -128,6 +115,7 @@ struct q6v5_wcss { + struct clk *qdsp6ss_xo_cbcr; + struct clk *qdsp6ss_core_gfmux; + struct clk *lcc_bcr_sleep; ++ struct clk *prng_clk; + struct regulator *cx_supply; + struct qcom_sysmon *sysmon; + +@@ -151,6 +139,21 @@ struct q6v5_wcss { + struct qcom_rproc_ssr ssr_subdev; + }; + ++struct wcss_data { ++ int (*init_clock)(struct q6v5_wcss *wcss); ++ int (*init_regulator)(struct q6v5_wcss *wcss); ++ const char *firmware_name; ++ unsigned int crash_reason_smem; ++ u32 version; ++ bool aon_reset_required; ++ bool wcss_q6_reset_required; ++ const char *ssr_name; ++ const char *sysmon_name; ++ int ssctl_id; ++ const struct rproc_ops *ops; ++ bool requires_force_stop; ++}; ++ + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) + { + int ret; +@@ -240,6 +243,12 @@ static int q6v5_wcss_start(struct rproc + struct q6v5_wcss *wcss = rproc->priv; + int ret; + ++ ret = clk_prepare_enable(wcss->prng_clk); ++ if (ret) { ++ dev_err(wcss->dev, "prng clock enable failed\n"); ++ return ret; ++ } ++ + qcom_q6v5_prepare(&wcss->q6v5); + + /* Release Q6 and WCSS reset */ +@@ -733,6 +742,7 @@ static int q6v5_wcss_stop(struct rproc * + return ret; + } + ++ clk_disable_unprepare(wcss->prng_clk); + qcom_q6v5_unprepare(&wcss->q6v5); + + return 0; +@@ -900,7 +910,21 @@ static int q6v5_alloc_memory_region(stru + return 0; + } + +-static int q6v5_wcss_init_clock(struct q6v5_wcss *wcss) ++static int ipq8074_init_clock(struct q6v5_wcss *wcss) ++{ ++ int ret; ++ ++ wcss->prng_clk = devm_clk_get(wcss->dev, "prng"); ++ if (IS_ERR(wcss->prng_clk)) { ++ ret = PTR_ERR(wcss->prng_clk); ++ if (ret != -EPROBE_DEFER) ++ dev_err(wcss->dev, "Failed to get prng clock\n"); ++ return ret; ++ } ++ return 0; ++} ++ ++static int qcs404_init_clock(struct q6v5_wcss *wcss) + { + int ret; + +@@ -990,7 +1014,7 @@ static int q6v5_wcss_init_clock(struct q + return 0; + } + +-static int q6v5_wcss_init_regulator(struct q6v5_wcss *wcss) ++static int qcs404_init_regulator(struct q6v5_wcss *wcss) + { + wcss->cx_supply = devm_regulator_get(wcss->dev, "cx"); + if (IS_ERR(wcss->cx_supply)) +@@ -1034,12 +1058,14 @@ static int q6v5_wcss_probe(struct platfo + if (ret) + goto free_rproc; + +- if (wcss->version == WCSS_QCS404) { +- ret = q6v5_wcss_init_clock(wcss); ++ if (desc->init_clock) { ++ ret = desc->init_clock(wcss); + if (ret) + goto free_rproc; ++ } + +- ret = q6v5_wcss_init_regulator(wcss); ++ if (desc->init_regulator) { ++ ret = desc->init_regulator(wcss); + if (ret) + goto free_rproc; + } +@@ -1086,6 +1112,7 @@ static int q6v5_wcss_remove(struct platf + } + + static const struct wcss_data wcss_ipq8074_res_init = { ++ .init_clock = ipq8074_init_clock, + .firmware_name = "IPQ8074/q6_fw.mdt", + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, +@@ -1095,6 +1122,8 @@ static const struct wcss_data wcss_ipq80 + }; + + static const struct wcss_data wcss_qcs404_res_init = { ++ .init_clock = qcs404_init_clock, ++ .init_regulator = qcs404_init_regulator, + .crash_reason_smem = WCSS_CRASH_REASON, + .firmware_name = "wcnss.mdt", + .version = WCSS_QCS404, diff --git a/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch b/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch new file mode 100644 index 0000000000..1d415942e0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch @@ -0,0 +1,143 @@ +From 7358d42dfbdfdb5d4f1d0d4c2e5c2bb4143a29b0 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:06 +0530 +Subject: [PATCH] remoteproc: qcom: Add secure PIL support + +IPQ8074 uses secure PIL. Hence, adding the support for the same. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 43 +++++++++++++++++++++++++++-- + 1 file changed, 40 insertions(+), 3 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -18,6 +18,7 @@ + #include <linux/regulator/consumer.h> + #include <linux/reset.h> + #include <linux/soc/qcom/mdt_loader.h> ++#include <linux/qcom_scm.h> + #include "qcom_common.h" + #include "qcom_pil_info.h" + #include "qcom_q6v5.h" +@@ -86,6 +87,9 @@ + #define TCSR_WCSS_CLK_ENABLE 0x14 + + #define MAX_HALT_REG 3 ++ ++#define WCNSS_PAS_ID 6 ++ + enum { + WCSS_IPQ8074, + WCSS_QCS404, +@@ -134,6 +138,7 @@ struct q6v5_wcss { + unsigned int crash_reason_smem; + u32 version; + bool requires_force_stop; ++ bool need_mem_protection; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_ssr ssr_subdev; +@@ -152,6 +157,7 @@ struct wcss_data { + int ssctl_id; + const struct rproc_ops *ops; + bool requires_force_stop; ++ bool need_mem_protection; + }; + + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) +@@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc + + qcom_q6v5_prepare(&wcss->q6v5); + ++ if (wcss->need_mem_protection) { ++ ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID); ++ if (ret) { ++ dev_err(wcss->dev, "wcss_reset failed\n"); ++ return ret; ++ } ++ goto wait_for_reset; ++ } ++ + /* Release Q6 and WCSS reset */ + ret = reset_control_deassert(wcss->wcss_reset); + if (ret) { +@@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc + if (ret) + goto wcss_q6_reset; + ++wait_for_reset: + ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ); + if (ret == -ETIMEDOUT) + dev_err(wcss->dev, "start timed out\n"); +@@ -718,6 +734,15 @@ static int q6v5_wcss_stop(struct rproc * + struct q6v5_wcss *wcss = rproc->priv; + int ret; + ++ if (wcss->need_mem_protection) { ++ ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID); ++ if (ret) { ++ dev_err(wcss->dev, "not able to shutdown\n"); ++ return ret; ++ } ++ goto pas_done; ++ } ++ + /* WCSS powerdown */ + if (wcss->requires_force_stop) { + ret = qcom_q6v5_request_stop(&wcss->q6v5, NULL); +@@ -742,6 +767,7 @@ static int q6v5_wcss_stop(struct rproc * + return ret; + } + ++pas_done: + clk_disable_unprepare(wcss->prng_clk); + qcom_q6v5_unprepare(&wcss->q6v5); + +@@ -765,9 +791,15 @@ static int q6v5_wcss_load(struct rproc * + struct q6v5_wcss *wcss = rproc->priv; + int ret; + +- ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, +- 0, wcss->mem_region, wcss->mem_phys, +- wcss->mem_size, &wcss->mem_reloc); ++ if (wcss->need_mem_protection) ++ ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, ++ WCNSS_PAS_ID, wcss->mem_region, ++ wcss->mem_phys, wcss->mem_size, ++ &wcss->mem_reloc); ++ else ++ ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, ++ 0, wcss->mem_region, wcss->mem_phys, ++ wcss->mem_size, &wcss->mem_reloc); + if (ret) + return ret; + +@@ -1036,6 +1068,9 @@ static int q6v5_wcss_probe(struct platfo + if (!desc) + return -EINVAL; + ++ if (desc->need_mem_protection && !qcom_scm_is_available()) ++ return -EPROBE_DEFER; ++ + rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, + desc->firmware_name, sizeof(*wcss)); + if (!rproc) { +@@ -1049,6 +1084,7 @@ static int q6v5_wcss_probe(struct platfo + + wcss->version = desc->version; + wcss->requires_force_stop = desc->requires_force_stop; ++ wcss->need_mem_protection = desc->need_mem_protection; + + ret = q6v5_wcss_init_mmio(wcss, pdev); + if (ret) +@@ -1119,6 +1155,7 @@ static const struct wcss_data wcss_ipq80 + .wcss_q6_reset_required = true, + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, ++ .need_mem_protection = true, + }; + + static const struct wcss_data wcss_qcs404_res_init = { diff --git a/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch b/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch new file mode 100644 index 0000000000..1231824af0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch @@ -0,0 +1,103 @@ +From b422c9d4f048b086ce83f44a7cfcddcce162897f Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:07 +0530 +Subject: [PATCH] remoteproc: qcom: Add support for split q6 + m3 wlan firmware + +IPQ8074 supports split firmware for q6 and m3 as well. +So add support for loading the m3 firmware before q6. +Now the drivers works fine for both split and unified +firmwares. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++---- + 1 file changed, 29 insertions(+), 4 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -139,6 +139,7 @@ struct q6v5_wcss { + u32 version; + bool requires_force_stop; + bool need_mem_protection; ++ const char *m3_firmware_name; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_ssr ssr_subdev; +@@ -147,7 +148,8 @@ struct q6v5_wcss { + struct wcss_data { + int (*init_clock)(struct q6v5_wcss *wcss); + int (*init_regulator)(struct q6v5_wcss *wcss); +- const char *firmware_name; ++ const char *q6_firmware_name; ++ const char *m3_firmware_name; + unsigned int crash_reason_smem; + u32 version; + bool aon_reset_required; +@@ -789,8 +791,29 @@ static void *q6v5_wcss_da_to_va(struct r + static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw) + { + struct q6v5_wcss *wcss = rproc->priv; ++ const struct firmware *m3_fw; + int ret; + ++ if (wcss->m3_firmware_name) { ++ ret = request_firmware(&m3_fw, wcss->m3_firmware_name, ++ wcss->dev); ++ if (ret) ++ goto skip_m3; ++ ++ ret = qcom_mdt_load_no_init(wcss->dev, m3_fw, ++ wcss->m3_firmware_name, 0, ++ wcss->mem_region, wcss->mem_phys, ++ wcss->mem_size, &wcss->mem_reloc); ++ ++ release_firmware(m3_fw); ++ ++ if (ret) { ++ dev_err(wcss->dev, "can't load m3_fw.bXX\n"); ++ return ret; ++ } ++ } ++ ++skip_m3: + if (wcss->need_mem_protection) + ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, + WCNSS_PAS_ID, wcss->mem_region, +@@ -1072,7 +1095,7 @@ static int q6v5_wcss_probe(struct platfo + return -EPROBE_DEFER; + + rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, +- desc->firmware_name, sizeof(*wcss)); ++ desc->q6_firmware_name, sizeof(*wcss)); + if (!rproc) { + dev_err(&pdev->dev, "failed to allocate rproc\n"); + return -ENOMEM; +@@ -1085,6 +1108,7 @@ static int q6v5_wcss_probe(struct platfo + wcss->version = desc->version; + wcss->requires_force_stop = desc->requires_force_stop; + wcss->need_mem_protection = desc->need_mem_protection; ++ wcss->m3_firmware_name = desc->m3_firmware_name; + + ret = q6v5_wcss_init_mmio(wcss, pdev); + if (ret) +@@ -1149,7 +1173,8 @@ static int q6v5_wcss_remove(struct platf + + static const struct wcss_data wcss_ipq8074_res_init = { + .init_clock = ipq8074_init_clock, +- .firmware_name = "IPQ8074/q6_fw.mdt", ++ .q6_firmware_name = "IPQ8074/q6_fw.mdt", ++ .m3_firmware_name = "IPQ8074/m3_fw.mdt", + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, +@@ -1162,7 +1187,7 @@ static const struct wcss_data wcss_qcs40 + .init_clock = qcs404_init_clock, + .init_regulator = qcs404_init_regulator, + .crash_reason_smem = WCSS_CRASH_REASON, +- .firmware_name = "wcnss.mdt", ++ .q6_firmware_name = "wcnss.mdt", + .version = WCSS_QCS404, + .aon_reset_required = false, + .wcss_q6_reset_required = false, diff --git a/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch b/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch new file mode 100644 index 0000000000..0ff2d0358b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch @@ -0,0 +1,24 @@ +From 3a8f67b4770c817b04794c9a02e3f88f85d86280 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:08 +0530 +Subject: [PATCH] remoteproc: qcom: Add ssr subdevice identifier + +Add name for ssr subdevice on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -1178,6 +1178,7 @@ static const struct wcss_data wcss_ipq80 + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, ++ .ssr_name = "q6wcss", + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, + .need_mem_protection = true, diff --git a/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch b/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch new file mode 100644 index 0000000000..c8e5aceefc --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch @@ -0,0 +1,79 @@ +From 8c73af6e8d78c66cfef0f551b00d375ec0b67ff3 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:09 +0530 +Subject: [PATCH] remoteproc: qcom: Update regmap offsets for halt register + +Fixed issue in reading halt-regs parameter from device-tree. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -86,7 +86,7 @@ + #define TCSR_WCSS_CLK_MASK 0x1F + #define TCSR_WCSS_CLK_ENABLE 0x14 + +-#define MAX_HALT_REG 3 ++#define MAX_HALT_REG 4 + + #define WCNSS_PAS_ID 6 + +@@ -154,6 +154,7 @@ struct wcss_data { + u32 version; + bool aon_reset_required; + bool wcss_q6_reset_required; ++ bool bcr_reset_required; + const char *ssr_name; + const char *sysmon_name; + int ssctl_id; +@@ -875,10 +876,13 @@ static int q6v5_wcss_init_reset(struct q + } + } + +- wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_bcr_reset"); +- if (IS_ERR(wcss->wcss_q6_bcr_reset)) { +- dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n"); +- return PTR_ERR(wcss->wcss_q6_bcr_reset); ++ if (desc->bcr_reset_required) { ++ wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, ++ "wcss_q6_bcr_reset"); ++ if (IS_ERR(wcss->wcss_q6_bcr_reset)) { ++ dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n"); ++ return PTR_ERR(wcss->wcss_q6_bcr_reset); ++ } + } + + return 0; +@@ -929,9 +933,9 @@ static int q6v5_wcss_init_mmio(struct q6 + return -EINVAL; + } + +- wcss->halt_q6 = halt_reg[0]; +- wcss->halt_wcss = halt_reg[1]; +- wcss->halt_nc = halt_reg[2]; ++ wcss->halt_q6 = halt_reg[1]; ++ wcss->halt_wcss = halt_reg[2]; ++ wcss->halt_nc = halt_reg[3]; + + return 0; + } +@@ -1178,6 +1182,7 @@ static const struct wcss_data wcss_ipq80 + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, ++ .bcr_reset_required = false, + .ssr_name = "q6wcss", + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, +@@ -1192,6 +1197,7 @@ static const struct wcss_data wcss_qcs40 + .version = WCSS_QCS404, + .aon_reset_required = false, + .wcss_q6_reset_required = false, ++ .bcr_reset_required = true, + .ssr_name = "mpss", + .sysmon_name = "wcnss", + .ssctl_id = 0x12, diff --git a/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch b/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch new file mode 100644 index 0000000000..fe0e0f9e0b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch @@ -0,0 +1,26 @@ +From ff7c6533ed8c4de58ed6c8aab03ea59c03eb4f31 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:10 +0530 +Subject: [PATCH] dt-bindings: clock: qcom: Add reset for WCSSAON + +Add binding for WCSSAON reset required for Q6v5 reset on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +Acked-by: Rob Herring <robh@kernel.org> +Acked-by: Stephen Boyd <sboyd@kernel.org> +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -381,6 +381,7 @@ + #define GCC_NSSPORT4_RESET 143 + #define GCC_NSSPORT5_RESET 144 + #define GCC_NSSPORT6_RESET 145 ++#define GCC_WCSSAON_RESET 146 + + #define USB0_GDSC 0 + #define USB1_GDSC 1 diff --git a/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch b/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch new file mode 100644 index 0000000000..791531775e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch @@ -0,0 +1,25 @@ +From 43d9788f546d24df22d8ba3fcc2497d7ccc198f3 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:11 +0530 +Subject: [PATCH] clk: qcom: Add WCSSAON reset + +Add WCSSAON reset required for Q6v5 on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +Acked-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/gcc-ipq8074.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -4717,6 +4717,7 @@ static const struct qcom_reset_map gcc_i + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, + [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, ++ [GCC_WCSSAON_RESET] = { 0x59010, 0 }, + }; + + static struct gdsc *gcc_ipq8074_gdscs[] = { diff --git a/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch new file mode 100644 index 0000000000..a562f7864e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch @@ -0,0 +1,48 @@ +From 406a332fd1bcc4e18d73cce390f56272fe9111d7 Mon Sep 17 00:00:00 2001 +From: Sivaprakash Murugesan <sivaprak@codeaurora.org> +Date: Fri, 17 Apr 2020 16:37:10 +0530 +Subject: [PATCH] remoteproc: wcss: disable auto boot for IPQ8074 + +There is no need for remoteproc to boot automatically, ath11k will trigger +booting when its probing. + +Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -161,6 +161,7 @@ struct wcss_data { + const struct rproc_ops *ops; + bool requires_force_stop; + bool need_mem_protection; ++ bool need_auto_boot; + }; + + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) +@@ -1151,6 +1152,7 @@ static int q6v5_wcss_probe(struct platfo + desc->sysmon_name, + desc->ssctl_id); + ++ rproc->auto_boot = desc->need_auto_boot; + ret = rproc_add(rproc); + if (ret) + goto free_rproc; +@@ -1187,6 +1189,7 @@ static const struct wcss_data wcss_ipq80 + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, + .need_mem_protection = true, ++ .need_auto_boot = false, + }; + + static const struct wcss_data wcss_qcs404_res_init = { +@@ -1203,6 +1206,7 @@ static const struct wcss_data wcss_qcs40 + .ssctl_id = 0x12, + .ops = &q6v5_wcss_qcs404_ops, + .requires_force_stop = false, ++ .need_auto_boot = true, + }; + + static const struct of_device_id q6v5_wcss_of_match[] = { diff --git a/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch b/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch new file mode 100644 index 0000000000..52d9efc5bf --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch @@ -0,0 +1,120 @@ +From 7388400b8bd42f71d040dbf2fdbdcb834fcc0ede Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Date: Sat, 30 Jan 2021 10:50:13 +0530 +Subject: [PATCH] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC + +Enable remoteproc WCSS PIL driver with glink and ssr subdevices. +Also enables smp2p and mailboxes required for IPC. + +Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org> +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 81 +++++++++++++++++++++++++++ + 1 file changed, 81 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -140,6 +140,32 @@ + }; + }; + ++ wcss: smp2p-wcss { ++ compatible = "qcom,smp2p"; ++ qcom,smem = <435>, <428>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <0 322 1>; ++ ++ mboxes = <&apcs_glb 9>; ++ ++ qcom,local-pid = <0>; ++ qcom,remote-pid = <1>; ++ ++ wcss_smp2p_out: master-kernel { ++ qcom,entry-name = "master-kernel"; ++ qcom,smp2p-feature-ssr-ack; ++ #qcom,smem-state-cells = <1>; ++ }; ++ ++ wcss_smp2p_in: slave-kernel { ++ qcom,entry-name = "slave-kernel"; ++ ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ }; ++ + soc: soc { + #address-cells = <0x1>; + #size-cells = <0x1>; +@@ -409,6 +435,11 @@ + #hwlock-cells = <1>; + }; + ++ tcsr_q6: syscon@1945000 { ++ compatible = "syscon"; ++ reg = <0x01945000 0xe000>; ++ }; ++ + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, +@@ -917,6 +948,56 @@ + "axi_s_sticky"; + status = "disabled"; + }; ++ ++ q6v5_wcss: q6v5_wcss@cd00000 { ++ compatible = "qcom,ipq8074-wcss-pil"; ++ reg = <0x0cd00000 0x4040>, ++ <0x004ab000 0x20>; ++ reg-names = "qdsp6", ++ "rmb"; ++ qca,auto-restart; ++ qca,extended-intc; ++ interrupts-extended = <&intc 0 325 1>, ++ <&wcss_smp2p_in 0 0>, ++ <&wcss_smp2p_in 1 0>, ++ <&wcss_smp2p_in 2 0>, ++ <&wcss_smp2p_in 3 0>; ++ interrupt-names = "wdog", ++ "fatal", ++ "ready", ++ "handover", ++ "stop-ack"; ++ ++ resets = <&gcc GCC_WCSSAON_RESET>, ++ <&gcc GCC_WCSS_BCR>, ++ <&gcc GCC_WCSS_Q6_BCR>; ++ ++ reset-names = "wcss_aon_reset", ++ "wcss_reset", ++ "wcss_q6_reset"; ++ ++ clocks = <&gcc GCC_PRNG_AHB_CLK>; ++ clock-names = "prng"; ++ ++ qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; ++ ++ qcom,smem-states = <&wcss_smp2p_out 0>, ++ <&wcss_smp2p_out 1>; ++ qcom,smem-state-names = "shutdown", ++ "stop"; ++ ++ memory-region = <&q6_region>; ++ ++ glink-edge { ++ interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>; ++ qcom,remote-pid = <1>; ++ mboxes = <&apcs_glb 8>; ++ ++ rpm_requests { ++ qcom,glink-channels = "IPCRTR"; ++ }; ++ }; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch b/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch new file mode 100644 index 0000000000..da64111890 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch @@ -0,0 +1,135 @@ +From a67d1901741c162645eda0dbdc3a2c0c2aff5cf4 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Tue, 21 Dec 2021 14:49:36 +0100 +Subject: [PATCH] arm64: dts: ipq8074: Add WLAN node + +IPQ8074 has a AHB based Q6v5 802.11ax radios that are supported +by the ath11k. + +Add the required DT node to enable the built-in radios. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 111 ++++++++++++++++++++++++++ + 1 file changed, 111 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -998,6 +998,117 @@ + }; + }; + }; ++ ++ wifi: wifi@c0000000 { ++ compatible = "qcom,ipq8074-wifi"; ++ reg = <0xc000000 0x2000000>; ++ ++ interrupts = <GIC_SPI 320 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 319 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>, ++ <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; ++ ++ interrupt-names = "misc-pulse1", ++ "misc-latch", ++ "sw-exception", ++ "ce0", ++ "ce1", ++ "ce2", ++ "ce3", ++ "ce4", ++ "ce5", ++ "ce6", ++ "ce7", ++ "ce8", ++ "ce9", ++ "ce10", ++ "ce11", ++ "host2wbm-desc-feed", ++ "host2reo-re-injection", ++ "host2reo-command", ++ "host2rxdma-monitor-ring3", ++ "host2rxdma-monitor-ring2", ++ "host2rxdma-monitor-ring1", ++ "reo2ost-exception", ++ "wbm2host-rx-release", ++ "reo2host-status", ++ "reo2host-destination-ring4", ++ "reo2host-destination-ring3", ++ "reo2host-destination-ring2", ++ "reo2host-destination-ring1", ++ "rxdma2host-monitor-destination-mac3", ++ "rxdma2host-monitor-destination-mac2", ++ "rxdma2host-monitor-destination-mac1", ++ "ppdu-end-interrupts-mac3", ++ "ppdu-end-interrupts-mac2", ++ "ppdu-end-interrupts-mac1", ++ "rxdma2host-monitor-status-ring-mac3", ++ "rxdma2host-monitor-status-ring-mac2", ++ "rxdma2host-monitor-status-ring-mac1", ++ "host2rxdma-host-buf-ring-mac3", ++ "host2rxdma-host-buf-ring-mac2", ++ "host2rxdma-host-buf-ring-mac1", ++ "rxdma2host-destination-ring-mac3", ++ "rxdma2host-destination-ring-mac2", ++ "rxdma2host-destination-ring-mac1", ++ "host2tcl-input-ring4", ++ "host2tcl-input-ring3", ++ "host2tcl-input-ring2", ++ "host2tcl-input-ring1", ++ "wbm2host-tx-completions-ring3", ++ "wbm2host-tx-completions-ring2", ++ "wbm2host-tx-completions-ring1", ++ "tcl2host-status-ring"; ++ qcom,rproc = <&q6v5_wcss>; ++ status = "disabled"; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch b/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch new file mode 100644 index 0000000000..a3c5f344ab --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch @@ -0,0 +1,59 @@ +From cb3ef99c1553565e1dc0301ccd5c1c0fa2d15c15 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 31 Dec 2021 17:56:14 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add CPU clock + +Now that CPU clock is exposed and can be controlled, add the necessary +properties to the CPU nodes. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -5,6 +5,7 @@ + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-ipq8074.h> ++#include <dt-bindings/clock/qcom,apss-ipq.h> + + / { + #address-cells = <2>; +@@ -38,6 +39,8 @@ + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU1: cpu@1 { +@@ -46,6 +49,8 @@ + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU2: cpu@2 { +@@ -54,6 +59,8 @@ + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU3: cpu@3 { +@@ -62,6 +69,8 @@ + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + L2_0: l2-cache { diff --git a/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch b/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch new file mode 100644 index 0000000000..3520b38134 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch @@ -0,0 +1,48 @@ +From 347ca56e86c99021fad059b9a8ef101245b8507e Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 31 Dec 2021 20:38:06 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add cooling cells to CPU nodes + +Since there is CPU Freq support as well as thermal sensor support +now for the IPQ8074, add cooling cells to CPU nodes so that they can +be used as cooling devices using CPU Freq. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -41,6 +41,7 @@ + enable-method = "psci"; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU1: cpu@1 { +@@ -51,6 +52,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU2: cpu@2 { +@@ -61,6 +63,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU3: cpu@3 { +@@ -71,6 +74,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + L2_0: l2-cache { diff --git a/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch b/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch new file mode 100644 index 0000000000..30f6e988aa --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch @@ -0,0 +1,168 @@ +From 97505f4c049fa2e8c86a53411a9e599033898533 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sat, 31 Dec 2022 00:27:42 +0100 +Subject: [PATCH] soc: qcom: socinfo: move SMEM item struct and defines to a + header + +Move SMEM item struct and related defines to a header in order to be able +to reuse them in the Qualcomm NVMEM CPUFreq driver instead of duplicating +them. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/soc/qcom/socinfo.c | 58 +-------------------------- + include/linux/soc/qcom/socinfo.h | 67 ++++++++++++++++++++++++++++++++ + 2 files changed, 68 insertions(+), 57 deletions(-) + create mode 100644 include/linux/soc/qcom/socinfo.h + +--- a/drivers/soc/qcom/socinfo.c ++++ b/drivers/soc/qcom/socinfo.c +@@ -11,6 +11,7 @@ + #include <linux/random.h> + #include <linux/slab.h> + #include <linux/soc/qcom/smem.h> ++#include <linux/soc/qcom/socinfo.h> + #include <linux/string.h> + #include <linux/sys_soc.h> + #include <linux/types.h> +@@ -25,15 +26,6 @@ + #define SOCINFO_MINOR(ver) ((ver) & 0xffff) + #define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff)) + +-#define SMEM_SOCINFO_BUILD_ID_LENGTH 32 +-#define SMEM_SOCINFO_CHIP_ID_LENGTH 32 +- +-/* +- * SMEM item id, used to acquire handles to respective +- * SMEM region. +- */ +-#define SMEM_HW_SW_BUILD_ID 137 +- + #ifdef CONFIG_DEBUG_FS + #define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32 + #define SMEM_IMAGE_VERSION_SIZE 4096 +@@ -105,54 +97,6 @@ static const char *const pmic_models[] = + }; + #endif /* CONFIG_DEBUG_FS */ + +-/* Socinfo SMEM item structure */ +-struct socinfo { +- __le32 fmt; +- __le32 id; +- __le32 ver; +- char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH]; +- /* Version 2 */ +- __le32 raw_id; +- __le32 raw_ver; +- /* Version 3 */ +- __le32 hw_plat; +- /* Version 4 */ +- __le32 plat_ver; +- /* Version 5 */ +- __le32 accessory_chip; +- /* Version 6 */ +- __le32 hw_plat_subtype; +- /* Version 7 */ +- __le32 pmic_model; +- __le32 pmic_die_rev; +- /* Version 8 */ +- __le32 pmic_model_1; +- __le32 pmic_die_rev_1; +- __le32 pmic_model_2; +- __le32 pmic_die_rev_2; +- /* Version 9 */ +- __le32 foundry_id; +- /* Version 10 */ +- __le32 serial_num; +- /* Version 11 */ +- __le32 num_pmics; +- __le32 pmic_array_offset; +- /* Version 12 */ +- __le32 chip_family; +- __le32 raw_device_family; +- __le32 raw_device_num; +- /* Version 13 */ +- __le32 nproduct_id; +- char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH]; +- /* Version 14 */ +- __le32 num_clusters; +- __le32 ncluster_array_offset; +- __le32 num_defective_parts; +- __le32 ndefective_parts_array_offset; +- /* Version 15 */ +- __le32 nmodem_supported; +-}; +- + #ifdef CONFIG_DEBUG_FS + struct socinfo_params { + u32 raw_device_family; +--- /dev/null ++++ b/include/linux/soc/qcom/socinfo.h +@@ -0,0 +1,67 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2009-2017, The Linux Foundation. All rights reserved. ++ * Copyright (c) 2017-2019, Linaro Ltd. ++ */ ++ ++#ifndef __QCOM_SOCINFO_H__ ++#define __QCOM_SOCINFO_H__ ++ ++/* ++ * SMEM item id, used to acquire handles to respective ++ * SMEM region. ++ */ ++#define SMEM_HW_SW_BUILD_ID 137 ++ ++#define SMEM_SOCINFO_BUILD_ID_LENGTH 32 ++#define SMEM_SOCINFO_CHIP_ID_LENGTH 32 ++ ++/* Socinfo SMEM item structure */ ++struct socinfo { ++ __le32 fmt; ++ __le32 id; ++ __le32 ver; ++ char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH]; ++ /* Version 2 */ ++ __le32 raw_id; ++ __le32 raw_ver; ++ /* Version 3 */ ++ __le32 hw_plat; ++ /* Version 4 */ ++ __le32 plat_ver; ++ /* Version 5 */ ++ __le32 accessory_chip; ++ /* Version 6 */ ++ __le32 hw_plat_subtype; ++ /* Version 7 */ ++ __le32 pmic_model; ++ __le32 pmic_die_rev; ++ /* Version 8 */ ++ __le32 pmic_model_1; ++ __le32 pmic_die_rev_1; ++ __le32 pmic_model_2; ++ __le32 pmic_die_rev_2; ++ /* Version 9 */ ++ __le32 foundry_id; ++ /* Version 10 */ ++ __le32 serial_num; ++ /* Version 11 */ ++ __le32 num_pmics; ++ __le32 pmic_array_offset; ++ /* Version 12 */ ++ __le32 chip_family; ++ __le32 raw_device_family; ++ __le32 raw_device_num; ++ /* Version 13 */ ++ __le32 nproduct_id; ++ char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH]; ++ /* Version 14 */ ++ __le32 num_clusters; ++ __le32 ncluster_array_offset; ++ __le32 num_defective_parts; ++ __le32 ndefective_parts_array_offset; ++ /* Version 15 */ ++ __le32 nmodem_supported; ++}; ++ ++#endif diff --git a/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch b/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch new file mode 100644 index 0000000000..aa7fe5a868 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch @@ -0,0 +1,50 @@ +From b7b7ea3a0cab42d4f1d4c9ae9eb7c7a3d03e7982 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 30 Dec 2022 22:51:47 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: reuse socinfo SMEM item struct + +Now that socinfo SMEM item struct and defines have been moved to a header +so we can utilize that instead. + +Now the SMEM value can be accesed directly, there is no need for defining +the ID for the SMEM request as well. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 14 +++++--------- + 1 file changed, 5 insertions(+), 9 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -28,8 +28,7 @@ + #include <linux/pm_opp.h> + #include <linux/slab.h> + #include <linux/soc/qcom/smem.h> +- +-#define MSM_ID_SMEM 137 ++#include <linux/soc/qcom/socinfo.h> + + enum _msm_id { + MSM8996V3 = 0xF6ul, +@@ -145,17 +144,14 @@ static void get_krait_bin_format_b(struc + static enum _msm8996_version qcom_cpufreq_get_msm_id(void) + { + size_t len; +- u32 *msm_id; ++ struct socinfo *info; + enum _msm8996_version version; + +- msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); +- if (IS_ERR(msm_id)) ++ info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len); ++ if (IS_ERR(info)) + return NUM_OF_MSM8996_VERSIONS; + +- /* The first 4 bytes are format, next to them is the actual msm-id */ +- msm_id++; +- +- switch ((enum _msm_id)*msm_id) { ++ switch (info->id) { + case MSM8996V3: + case APQ8096V3: + version = MSM8996_V3; diff --git a/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch b/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch new file mode 100644 index 0000000000..3303b40277 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch @@ -0,0 +1,46 @@ +From 132b2f15b8ae3f848b3e6f2962f409cfab0ca759 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 30 Dec 2022 23:33:47 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: use SoC ID-s from bindings + +SMEM SoC ID-s are now stored in DT bindings so lets use those instead of +defining them in the driver again. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++---------- + 1 file changed, 5 insertions(+), 10 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -30,12 +30,7 @@ + #include <linux/soc/qcom/smem.h> + #include <linux/soc/qcom/socinfo.h> + +-enum _msm_id { +- MSM8996V3 = 0xF6ul, +- APQ8096V3 = 0x123ul, +- MSM8996SG = 0x131ul, +- APQ8096SG = 0x138ul, +-}; ++#include <dt-bindings/arm/qcom,ids.h> + + enum _msm8996_version { + MSM8996_V3, +@@ -152,12 +147,12 @@ static enum _msm8996_version qcom_cpufre + return NUM_OF_MSM8996_VERSIONS; + + switch (info->id) { +- case MSM8996V3: +- case APQ8096V3: ++ case QCOM_ID_MSM8996: ++ case QCOM_ID_APQ8096: + version = MSM8996_V3; + break; +- case MSM8996SG: +- case APQ8096SG: ++ case QCOM_ID_MSM8996SG: ++ case QCOM_ID_APQ8096SG: + version = MSM8996_SG; + break; + default: diff --git a/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch b/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch new file mode 100644 index 0000000000..768866b1b2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch @@ -0,0 +1,106 @@ +From 85bf71b130ab0e939f53ec9cf1131d67d148bc9a Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sat, 31 Dec 2022 12:45:31 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: make qcom_cpufreq_get_msm_id() return + the SoC ID + +Currently, qcom_cpufreq_get_msm_id() does not simply return the SoC ID +after getting it via SMEM call but instead uses an enum to encode the +matched SMEM ID to 2 variants of MSM8996 which are then used in +qcom_cpufreq_kryo_name_version() to set the supported version. + +This prevents qcom_cpufreq_get_msm_id() from being universal and its doing +more than its name suggests, so lets make it just return the SoC ID +directly which allows matching directly on the SoC ID and removes the need +for msm8996_version enum which simplifies the driver. +It also allows reusing the qcom_cpufreq_get_msm_id() for new SoC-s. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 44 ++++++++-------------------- + 1 file changed, 12 insertions(+), 32 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -32,12 +32,6 @@ + + #include <dt-bindings/arm/qcom,ids.h> + +-enum _msm8996_version { +- MSM8996_V3, +- MSM8996_SG, +- NUM_OF_MSM8996_VERSIONS, +-}; +- + struct qcom_cpufreq_drv; + + struct qcom_cpufreq_match_data { +@@ -136,30 +130,16 @@ static void get_krait_bin_format_b(struc + dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); + } + +-static enum _msm8996_version qcom_cpufreq_get_msm_id(void) ++static int qcom_cpufreq_get_msm_id(void) + { + size_t len; + struct socinfo *info; +- enum _msm8996_version version; + + info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len); + if (IS_ERR(info)) +- return NUM_OF_MSM8996_VERSIONS; +- +- switch (info->id) { +- case QCOM_ID_MSM8996: +- case QCOM_ID_APQ8096: +- version = MSM8996_V3; +- break; +- case QCOM_ID_MSM8996SG: +- case QCOM_ID_APQ8096SG: +- version = MSM8996_SG; +- break; +- default: +- version = NUM_OF_MSM8996_VERSIONS; +- } ++ return PTR_ERR(info); + +- return version; ++ return info->id; + } + + static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, +@@ -168,25 +148,25 @@ static int qcom_cpufreq_kryo_name_versio + struct qcom_cpufreq_drv *drv) + { + size_t len; ++ int msm_id; + u8 *speedbin; +- enum _msm8996_version msm8996_version; + *pvs_name = NULL; + +- msm8996_version = qcom_cpufreq_get_msm_id(); +- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { +- dev_err(cpu_dev, "Not Snapdragon 820/821!"); +- return -ENODEV; +- } ++ msm_id = qcom_cpufreq_get_msm_id(); ++ if (msm_id < 0) ++ return msm_id; + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + +- switch (msm8996_version) { +- case MSM8996_V3: ++ switch (msm_id) { ++ case QCOM_ID_MSM8996: ++ case QCOM_ID_APQ8096: + drv->versions = 1 << (unsigned int)(*speedbin); + break; +- case MSM8996_SG: ++ case QCOM_ID_MSM8996SG: ++ case QCOM_ID_APQ8096SG: + drv->versions = 1 << ((unsigned int)(*speedbin) + 4); + break; + default: diff --git a/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch new file mode 100644 index 0000000000..0a784f7393 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch @@ -0,0 +1,100 @@ +From 813f2b5ad002e691b92154037f154b4444eedd54 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sat, 31 Dec 2022 13:03:41 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: add support for IPQ8074 + +IPQ8074 comes in 2 families: +* IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz +* IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz + +So, in order to be able to share one OPP table lets add support for IPQ8074 +family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. + +IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device +will get created by NVMEM CPUFreq driver. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/cpufreq/cpufreq-dt-platdev.c | 1 + + drivers/cpufreq/qcom-cpufreq-nvmem.c | 39 ++++++++++++++++++++++++++++ + 2 files changed, 40 insertions(+) + +--- a/drivers/cpufreq/cpufreq-dt-platdev.c ++++ b/drivers/cpufreq/cpufreq-dt-platdev.c +@@ -157,6 +157,7 @@ static const struct of_device_id blockli + { .compatible = "ti,omap3", }, + + { .compatible = "qcom,ipq8064", }, ++ { .compatible = "qcom,ipq8074", }, + { .compatible = "qcom,apq8064", }, + { .compatible = "qcom,msm8974", }, + { .compatible = "qcom,msm8960", }, +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -32,6 +32,9 @@ + + #include <dt-bindings/arm/qcom,ids.h> + ++#define IPQ8074_HAWKEYE_VERSION BIT(0) ++#define IPQ8074_ACORN_VERSION BIT(1) ++ + struct qcom_cpufreq_drv; + + struct qcom_cpufreq_match_data { +@@ -218,6 +221,37 @@ len_error: + return ret; + } + ++static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, ++ struct qcom_cpufreq_drv *drv) ++{ ++ int msm_id; ++ *pvs_name = NULL; ++ ++ msm_id = qcom_cpufreq_get_msm_id(); ++ if (msm_id < 0) ++ return msm_id; ++ ++ switch (msm_id) { ++ case QCOM_ID_IPQ8070A: ++ case QCOM_ID_IPQ8071A: ++ drv->versions = IPQ8074_ACORN_VERSION; ++ break; ++ case QCOM_ID_IPQ8072A: ++ case QCOM_ID_IPQ8074A: ++ case QCOM_ID_IPQ8076A: ++ case QCOM_ID_IPQ8078A: ++ drv->versions = IPQ8074_HAWKEYE_VERSION; ++ break; ++ default: ++ BUG(); ++ break; ++ } ++ ++ return 0; ++} ++ + static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, + }; +@@ -232,6 +266,10 @@ static const struct qcom_cpufreq_match_d + .genpd_names = qcs404_genpd_names, + }; + ++static const struct qcom_cpufreq_match_data match_data_ipq8074 = { ++ .get_version = qcom_cpufreq_ipq8074_name_version, ++}; ++ + static int qcom_cpufreq_probe(struct platform_device *pdev) + { + struct qcom_cpufreq_drv *drv; +@@ -431,6 +469,7 @@ static const struct of_device_id qcom_cp + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, + { .compatible = "qcom,ipq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 }, + { .compatible = "qcom,apq8064", .data = &match_data_krait }, + { .compatible = "qcom,msm8974", .data = &match_data_krait }, + { .compatible = "qcom,msm8960", .data = &match_data_krait }, diff --git a/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch b/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch new file mode 100644 index 0000000000..3a6f4e9c87 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch @@ -0,0 +1,128 @@ +From 04d2fc6a551bbd972a6428059b45ce79cb9de9d7 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 6 May 2022 22:38:24 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add QFPROM fuses + +Add the QFPROM node and CPR fuses. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 107 ++++++++++++++++++++++++++ + 1 file changed, 107 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -340,6 +340,113 @@ + status = "disabled"; + }; + ++ qfprom: efuse@a4000 { ++ compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; ++ reg = <0x000a4000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpr_efuse_speedbin: speedbin@125 { ++ reg = <0x125 0x1>; ++ bits = <0 3>; ++ }; ++ ++ cpr_efuse_boost_cfg: boost_cfg@125 { ++ reg = <0x125 0x1>; ++ bits = <3 3>; ++ }; ++ ++ cpr_efuse_misc_volt_adj: misc_volt_adj@125 { ++ reg = <0x125 0x1>; ++ bits = <3 3>; ++ }; ++ ++ cpr_efuse_boost_volt: boost_volt@126 { ++ reg = <0x126 0x1>; ++ bits = <6 1>; ++ }; ++ ++ cpr_efuse_revision: revision@23e { ++ reg = <0x23e 0x1>; ++ bits = <5 3>; ++ }; ++ ++ cpr_efuse_ro_sel0: rosel0@249 { ++ reg = <0x249 0x1>; ++ bits = <0 4>; ++ }; ++ ++ cpr_efuse_ro_sel1: rosel1@248 { ++ reg = <0x248 0x1>; ++ bits = <4 4>; ++ }; ++ ++ cpr_efuse_ro_sel2: rosel2@248 { ++ reg = <0x248 0x2>; ++ bits = <0 4>; ++ }; ++ ++ cpr_efuse_ro_sel3: rosel3@249 { ++ reg = <0x249 0x1>; ++ bits = <4 4>; ++ }; ++ ++ cpr_efuse_init_voltage0: ivoltage0@23a { ++ reg = <0x23a 0x1>; ++ bits = <2 6>; ++ }; ++ ++ cpr_efuse_init_voltage1: ivoltage1@239 { ++ reg = <0x239 0x2>; ++ bits = <4 6>; ++ }; ++ ++ cpr_efuse_init_voltage2: ivoltage2@238 { ++ reg = <0x238 0x2>; ++ bits = <6 6>; ++ }; ++ ++ cpr_efuse_init_voltage3: ivoltage3@238 { ++ reg = <0x238 0x1>; ++ bits = <0 6>; ++ }; ++ ++ cpr_efuse_quot0: quot0@244 { ++ reg = <0x244 0x2>; ++ bits = <0 12>; ++ }; ++ ++ cpr_efuse_quot1: quot1@242 { ++ reg = <0x242 0x2>; ++ bits = <4 12>; ++ }; ++ ++ cpr_efuse_quot2: quot2@241 { ++ reg = <0x241 0x2>; ++ bits = <0 12>; ++ }; ++ ++ cpr_efuse_quot3: quot3@245 { ++ reg = <0x245 0x2>; ++ bits = <4 12>; ++ }; ++ ++ cpr_efuse_quot0_offset: quot0_offset@23d { ++ reg = <0x23d 0x2>; ++ bits = <6 7>; ++ }; ++ ++ cpr_efuse_quot1_offset: quot1_offset@23c { ++ reg = <0x23c 0x2>; ++ bits = <7 7>; ++ }; ++ ++ cpr_efuse_quot2_offset: quot2_offset@23c { ++ reg = <0x23c 0x1>; ++ bits = <0 7>; ++ }; ++ }; ++ + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; diff --git a/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch b/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch new file mode 100644 index 0000000000..9c1e7b9d29 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch @@ -0,0 +1,102 @@ +From a20c4e8738a00087aa5d53fe5148ed484e23d229 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sat, 31 Dec 2022 13:56:26 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add CPU OPP table + +Now that there is NVMEM CPUFreq support for IPQ8074, we can add the OPP +table for SoC. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 52 +++++++++++++++++++++++++++ + 1 file changed, 52 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -42,6 +42,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { +@@ -53,6 +54,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { +@@ -64,6 +66,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { +@@ -75,6 +78,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { +@@ -83,6 +87,54 @@ + }; + }; + ++ cpu_opp_table: opp-table { ++ compatible = "operating-points-v2-kryo-cpu"; ++ nvmem-cells = <&cpr_efuse_speedbin>; ++ opp-shared; ++ ++ opp-1017600000 { ++ opp-hz = /bits/ 64 <1017600000>; ++ opp-microvolt = <1>; ++ opp-supported-hw = <0xf>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1382400000 { ++ opp-hz = /bits/ 64 <1382400000>; ++ opp-microvolt = <2>; ++ opp-supported-hw = <0xf>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1651200000 { ++ opp-hz = /bits/ 64 <1651200000>; ++ opp-microvolt = <3>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1843200000 { ++ opp-hz = /bits/ 64 <1843200000>; ++ opp-microvolt = <4>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1920000000 { ++ opp-hz = /bits/ 64 <1920000000>; ++ opp-microvolt = <5>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-2208000000 { ++ opp-hz = /bits/ 64 <2208000000>; ++ opp-microvolt = <6>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ }; ++ + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch new file mode 100644 index 0000000000..eb772be4ce --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch @@ -0,0 +1,38 @@ +From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 8 Jan 2023 13:36:28 +0100 +Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s + +Having only .name populated in parent_data for clocks which are only +globally searchable currently will not work as the clk core won't copy +that name if there is no .fw_name present as well. + +So, populate .fw_name for usb3phy clocks in parent_data as they were +missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). + +Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/clk/qcom/gcc-ipq8074.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -934,7 +934,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_0_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -1002,7 +1002,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_1_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + diff --git a/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch b/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch new file mode 100644 index 0000000000..58dfba6e9c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch @@ -0,0 +1,52 @@ +From 1bfcec16a591622b4993c043e6cc4d07f3690767 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Sun, 8 Jan 2023 13:39:55 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock + output names + +It seems that clock-output-names for the USB3 QMP PHY-s where set without +actually checking what is the GCC clock driver expecting, so clock core +could never actually find the parents for usb0_pipe_clk_src and +usb1_pipe_clk_src clocks in the GCC driver. + +So, correct the names to be what the driver expects so that parenting +works. + +Before: +gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y +gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y + +After: + usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y + gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y + gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y + +Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -263,7 +263,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "gcc_usb1_pipe_clk_src"; ++ clock-output-names = "usb3phy_1_cc_pipe_clk"; + }; + }; + +@@ -306,7 +306,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "gcc_usb0_pipe_clk_src"; ++ clock-output-names = "usb3phy_0_cc_pipe_clk"; + }; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch b/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch new file mode 100644 index 0000000000..2e5c72b7d1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch @@ -0,0 +1,1047 @@ +From 6c98adf98236b8644b8f5e1aa7af9f1a88ea2766 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 11 Apr 2022 14:38:08 +0200 +Subject: [PATCH] power: Add Qualcomm APM + +Add Qualcomm APM driver, which allows scaling cache and memory fabrics. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/power/Kconfig | 1 + + drivers/power/Makefile | 1 + + drivers/power/qcom/Kconfig | 7 + + drivers/power/qcom/Makefile | 1 + + drivers/power/qcom/apm.c | 944 +++++++++++++++++++++++++++++++++ + include/linux/power/qcom/apm.h | 48 ++ + 6 files changed, 1002 insertions(+) + create mode 100644 drivers/power/qcom/Kconfig + create mode 100644 drivers/power/qcom/Makefile + create mode 100644 drivers/power/qcom/apm.c + create mode 100644 include/linux/power/qcom/apm.h + +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + source "drivers/power/reset/Kconfig" + source "drivers/power/supply/Kconfig" ++source "drivers/power/qcom/Kconfig" +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + obj-$(CONFIG_POWER_RESET) += reset/ + obj-$(CONFIG_POWER_SUPPLY) += supply/ ++obj-$(CONFIG_QCOM_APM) += qcom/ +--- /dev/null ++++ b/drivers/power/qcom/Kconfig +@@ -0,0 +1,7 @@ ++config QCOM_APM ++ bool "Qualcomm Technologies Inc platform specific APM driver" ++ help ++ Platform specific driver to manage the power source of ++ memory arrays. Interfaces with regulator drivers to ensure ++ SRAM Vmin requirements are met across different performance ++ levels. +--- /dev/null ++++ b/drivers/power/qcom/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_QCOM_APM) += apm.o +--- /dev/null ++++ b/drivers/power/qcom/apm.c +@@ -0,0 +1,944 @@ ++/* ++ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include <linux/debugfs.h> ++#include <linux/delay.h> ++#include <linux/of_device.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/list.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/power/qcom/apm.h> ++ ++/* ++ * VDD_APCC ++ * ============================================================= ++ * | VDD_MX | | ++ * | ==========================|============= | ++ * ___|___ ___|___ ___|___ ___|___ ___|___ ___|___ ++ * | | | | | | | | | | | | ++ * | APCC | | MX HS | | MX HS | | APCC | | MX HS | | APCC | ++ * | HS | | | | | | HS | | | | HS | ++ * |_______| |_______| |_______| |_______| |_______| |_______| ++ * |_________| |_________| |__________| ++ * | | | ++ * ______|_____ ______|_____ _______|_____ ++ * | | | | | | ++ * | | | | | | ++ * | CPU MEM | | L2 MEM | | L3 MEM | ++ * | Arrays | | Arrays | | Arrays | ++ * | | | | | | ++ * |____________| |____________| |_____________| ++ * ++ */ ++ ++/* Register value definitions */ ++#define APCS_GFMUXA_SEL_VAL 0x13 ++#define APCS_GFMUXA_DESEL_VAL 0x03 ++#define MSM_APM_MX_MODE_VAL 0x00 ++#define MSM_APM_APCC_MODE_VAL 0x10 ++#define MSM_APM_MX_DONE_VAL 0x00 ++#define MSM_APM_APCC_DONE_VAL 0x03 ++#define MSM_APM_OVERRIDE_SEL_VAL 0xb0 ++#define MSM_APM_SEC_CLK_SEL_VAL 0x30 ++#define SPM_EVENT_SET_VAL 0x01 ++#define SPM_EVENT_CLEAR_VAL 0x00 ++ ++/* Register bit mask definitions */ ++#define MSM_APM_CTL_STS_MASK 0x0f ++ ++/* Register offset definitions */ ++#define APCC_APM_MODE 0x00000098 ++#define APCC_APM_CTL_STS 0x000000a8 ++#define APCS_SPARE 0x00000068 ++#define APCS_VERSION 0x00000fd0 ++ ++#define HMSS_VERSION_1P2 0x10020000 ++ ++#define MSM_APM_SWITCH_TIMEOUT_US 10 ++#define SPM_WAKEUP_DELAY_US 2 ++#define SPM_EVENT_NUM 6 ++ ++#define MSM_APM_DRIVER_NAME "qcom,msm-apm" ++ ++enum { ++ MSM8996_ID, ++ MSM8953_ID, ++ IPQ807x_ID, ++}; ++ ++struct msm_apm_ctrl_dev { ++ struct list_head list; ++ struct device *dev; ++ enum msm_apm_supply supply; ++ spinlock_t lock; ++ void __iomem *reg_base; ++ void __iomem *apcs_csr_base; ++ void __iomem **apcs_spm_events_addr; ++ void __iomem *apc0_pll_ctl_addr; ++ void __iomem *apc1_pll_ctl_addr; ++ u32 version; ++ struct dentry *debugfs; ++ u32 msm_id; ++}; ++ ++#if defined(CONFIG_DEBUG_FS) ++static struct dentry *apm_debugfs_base; ++#endif ++ ++static DEFINE_MUTEX(apm_ctrl_list_mutex); ++static LIST_HEAD(apm_ctrl_list); ++ ++/* ++ * Get the resources associated with the APM controller from device tree ++ * and remap all I/O addresses that are relevant to this HW revision. ++ */ ++static int msm_apm_ctrl_devm_ioremap(struct platform_device *pdev, ++ struct msm_apm_ctrl_dev *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ static const char *res_name[SPM_EVENT_NUM] = { ++ "apc0-l2-spm", ++ "apc1-l2-spm", ++ "apc0-cpu0-spm", ++ "apc0-cpu1-spm", ++ "apc1-cpu0-spm", ++ "apc1-cpu1-spm" ++ }; ++ int i, ret = 0; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb"); ++ if (!res) { ++ dev_err(dev, "Missing PM APCC Global register physical address"); ++ return -EINVAL; ++ } ++ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->reg_base) { ++ dev_err(dev, "Failed to map PM APCC Global registers\n"); ++ return -ENOMEM; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apcs-csr"); ++ if (!res) { ++ dev_err(dev, "Missing APCS CSR physical base address"); ++ return -EINVAL; ++ } ++ ctrl->apcs_csr_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->apcs_csr_base) { ++ dev_err(dev, "Failed to map APCS CSR registers\n"); ++ return -ENOMEM; ++ } ++ ++ ctrl->version = readl_relaxed(ctrl->apcs_csr_base + APCS_VERSION); ++ ++ if (ctrl->version >= HMSS_VERSION_1P2) ++ return ret; ++ ++ ctrl->apcs_spm_events_addr = devm_kzalloc(&pdev->dev, ++ SPM_EVENT_NUM ++ * sizeof(void __iomem *), ++ GFP_KERNEL); ++ if (!ctrl->apcs_spm_events_addr) { ++ dev_err(dev, "Failed to allocate memory for APCS SPM event registers\n"); ++ return -ENOMEM; ++ } ++ ++ for (i = 0; i < SPM_EVENT_NUM; i++) { ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ res_name[i]); ++ if (!res) { ++ dev_err(dev, "Missing address for %s\n", res_name[i]); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apcs_spm_events_addr[i] = devm_ioremap(dev, res->start, ++ resource_size(res)); ++ if (!ctrl->apcs_spm_events_addr[i]) { ++ dev_err(dev, "Failed to map %s\n", res_name[i]); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ dev_dbg(dev, "%s event phys: %pa virt:0x%p\n", res_name[i], ++ &res->start, ctrl->apcs_spm_events_addr[i]); ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "apc0-pll-ctl"); ++ if (!res) { ++ dev_err(dev, "Missing APC0 PLL CTL physical address\n"); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apc0_pll_ctl_addr = devm_ioremap(dev, ++ res->start, ++ resource_size(res)); ++ if (!ctrl->apc0_pll_ctl_addr) { ++ dev_err(dev, "Failed to map APC0 PLL CTL register\n"); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "apc1-pll-ctl"); ++ if (!res) { ++ dev_err(dev, "Missing APC1 PLL CTL physical address\n"); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apc1_pll_ctl_addr = devm_ioremap(dev, ++ res->start, ++ resource_size(res)); ++ if (!ctrl->apc1_pll_ctl_addr) { ++ dev_err(dev, "Failed to map APC1 PLL CTL register\n"); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ return ret; ++ ++free_events: ++ devm_kfree(dev, ctrl->apcs_spm_events_addr); ++ return ret; ++} ++ ++/* 8953 register offset definition */ ++#define MSM8953_APM_DLY_CNTR 0x2ac ++ ++/* Register field shift definitions */ ++#define APM_CTL_SEL_SWITCH_DLY_SHIFT 0 ++#define APM_CTL_RESUME_CLK_DLY_SHIFT 8 ++#define APM_CTL_HALT_CLK_DLY_SHIFT 16 ++#define APM_CTL_POST_HALT_DLY_SHIFT 24 ++ ++/* Register field mask definitions */ ++#define APM_CTL_SEL_SWITCH_DLY_MASK GENMASK(7, 0) ++#define APM_CTL_RESUME_CLK_DLY_MASK GENMASK(15, 8) ++#define APM_CTL_HALT_CLK_DLY_MASK GENMASK(23, 16) ++#define APM_CTL_POST_HALT_DLY_MASK GENMASK(31, 24) ++ ++/* ++ * Get the resources associated with the msm8953 APM controller from ++ * device tree, remap all I/O addresses, and program the initial ++ * register configuration required for the 8953 APM controller device. ++ */ ++static int msm8953_apm_ctrl_init(struct platform_device *pdev, ++ struct msm_apm_ctrl_dev *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ u32 delay_counter, val = 0, regval = 0; ++ int rc = 0; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb"); ++ if (!res) { ++ dev_err(dev, "Missing PM APCC Global register physical address\n"); ++ return -ENODEV; ++ } ++ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->reg_base) { ++ dev_err(dev, "Failed to map PM APCC Global registers\n"); ++ return -ENOMEM; ++ } ++ ++ /* ++ * Initial APM register configuration required before starting ++ * APM HW controller. ++ */ ++ regval = readl_relaxed(ctrl->reg_base + MSM8953_APM_DLY_CNTR); ++ val = regval; ++ ++ if (of_find_property(dev->of_node, "qcom,apm-post-halt-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-post-halt-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-post-halt-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_POST_HALT_DLY_MASK; ++ val |= (delay_counter << APM_CTL_POST_HALT_DLY_SHIFT) ++ & APM_CTL_POST_HALT_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-halt-clk-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-halt-clk-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-halt-clk-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_HALT_CLK_DLY_MASK; ++ val |= (delay_counter << APM_CTL_HALT_CLK_DLY_SHIFT) ++ & APM_CTL_HALT_CLK_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-resume-clk-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-resume-clk-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-resume-clk-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_RESUME_CLK_DLY_MASK; ++ val |= (delay_counter << APM_CTL_RESUME_CLK_DLY_SHIFT) ++ & APM_CTL_RESUME_CLK_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-sel-switch-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-sel-switch-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-sel-switch-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_SEL_SWITCH_DLY_MASK; ++ val |= (delay_counter << APM_CTL_SEL_SWITCH_DLY_SHIFT) ++ & APM_CTL_SEL_SWITCH_DLY_MASK; ++ } ++ ++ if (val != regval) { ++ writel_relaxed(val, ctrl->reg_base + MSM8953_APM_DLY_CNTR); ++ /* make sure write completes before return */ ++ mb(); ++ } ++ ++ return rc; ++} ++ ++static int msm8996_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Clear SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_CLEAR_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ udelay(SPM_WAKEUP_DELAY_US); ++ ++ /* Switch APC/CBF to GPLL0 clock */ ++ writel_relaxed(APCS_GFMUXA_SEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Ensure writes complete before proceeding */ ++ mb(); ++ } ++ ++ /* Switch arrays to MX supply and wait for its completion */ ++ writel_relaxed(MSM_APM_MX_MODE_VAL, ctrl_dev->reg_base + ++ APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS); ++ if ((regval & MSM_APM_CTL_STS_MASK) == ++ MSM_APM_MX_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Switch APC/CBF clocks to original source */ ++ writel_relaxed(APCS_GFMUXA_DESEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Complete clock source switch before SPM event sequence */ ++ mb(); ++ ++ /* Set SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_SET_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ } ++ ++ if (!ret) { ++ ctrl_dev->supply = MSM_APM_SUPPLY_MX; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm8996_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Clear SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_CLEAR_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ udelay(SPM_WAKEUP_DELAY_US); ++ ++ /* Switch APC/CBF to GPLL0 clock */ ++ writel_relaxed(APCS_GFMUXA_SEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Ensure previous writes complete before proceeding */ ++ mb(); ++ } ++ ++ /* Switch arrays to APCC supply and wait for its completion */ ++ writel_relaxed(MSM_APM_APCC_MODE_VAL, ctrl_dev->reg_base + ++ APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS); ++ if ((regval & MSM_APM_CTL_STS_MASK) == ++ MSM_APM_APCC_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Set SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_SET_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ /* Complete SPM event sequence before clock source switch */ ++ mb(); ++ ++ /* Switch APC/CBF clocks to original source */ ++ writel_relaxed(APCS_GFMUXA_DESEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ } ++ ++ if (!ret) { ++ ctrl_dev->supply = MSM_APM_SUPPLY_APCC; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++/* 8953 register value definitions */ ++#define MSM8953_APM_MX_MODE_VAL 0x00 ++#define MSM8953_APM_APCC_MODE_VAL 0x02 ++#define MSM8953_APM_MX_DONE_VAL 0x00 ++#define MSM8953_APM_APCC_DONE_VAL 0x03 ++ ++/* 8953 register offset definitions */ ++#define MSM8953_APCC_APM_MODE 0x000002a8 ++#define MSM8953_APCC_APM_CTL_STS 0x000002b0 ++ ++/* 8953 constants */ ++#define MSM8953_APM_SWITCH_TIMEOUT_US 500 ++ ++/* Register bit mask definitions */ ++#define MSM8953_APM_CTL_STS_MASK 0x1f ++ ++static int msm8953_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Switch arrays to MX supply and wait for its completion */ ++ writel_relaxed(MSM8953_APM_MX_MODE_VAL, ctrl_dev->reg_base + ++ MSM8953_APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + ++ MSM8953_APCC_APM_CTL_STS); ++ if ((regval & MSM8953_APM_CTL_STS_MASK) == ++ MSM8953_APM_MX_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } else { ++ ctrl_dev->supply = MSM_APM_SUPPLY_MX; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm8953_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Switch arrays to APCC supply and wait for its completion */ ++ writel_relaxed(MSM8953_APM_APCC_MODE_VAL, ctrl_dev->reg_base + ++ MSM8953_APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + ++ MSM8953_APCC_APM_CTL_STS); ++ if ((regval & MSM8953_APM_CTL_STS_MASK) == ++ MSM8953_APM_APCC_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } else { ++ ctrl_dev->supply = MSM_APM_SUPPLY_APCC; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int ret = 0; ++ ++ switch (ctrl_dev->msm_id) { ++ case MSM8996_ID: ++ ret = msm8996_apm_switch_to_mx(ctrl_dev); ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_switch_to_mx(ctrl_dev); ++ break; ++ } ++ ++ return ret; ++} ++ ++static int msm_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int ret = 0; ++ ++ switch (ctrl_dev->msm_id) { ++ case MSM8996_ID: ++ ret = msm8996_apm_switch_to_apcc(ctrl_dev); ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_switch_to_apcc(ctrl_dev); ++ break; ++ } ++ ++ return ret; ++} ++ ++/** ++ * msm_apm_get_supply() - Returns the supply that is currently ++ * powering the memory arrays ++ * @ctrl_dev: Pointer to an MSM APM controller device ++ * ++ * Returns the supply currently selected by the APM. ++ */ ++int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ return ctrl_dev->supply; ++} ++EXPORT_SYMBOL(msm_apm_get_supply); ++ ++/** ++ * msm_apm_set_supply() - Perform the necessary steps to switch the voltage ++ * source of the memory arrays to a given supply ++ * @ctrl_dev: Pointer to an MSM APM controller device ++ * @supply: Power rail to use as supply for the memory ++ * arrays ++ * ++ * Returns 0 on success, -ETIMEDOUT on APM switch timeout, or -EPERM if ++ * the supply is not supported. ++ */ ++int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply) ++{ ++ int ret; ++ ++ switch (supply) { ++ case MSM_APM_SUPPLY_APCC: ++ ret = msm_apm_switch_to_apcc(ctrl_dev); ++ break; ++ case MSM_APM_SUPPLY_MX: ++ ret = msm_apm_switch_to_mx(ctrl_dev); ++ break; ++ default: ++ ret = -EPERM; ++ break; ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL(msm_apm_set_supply); ++ ++/** ++ * msm_apm_ctrl_dev_get() - get a handle to the MSM APM controller linked to ++ * the device in device tree ++ * @dev: Pointer to the device ++ * ++ * The device must specify "qcom,apm-ctrl" property in its device tree ++ * node which points to an MSM APM controller device node. ++ * ++ * Returns an MSM APM controller handle if successful or ERR_PTR on any error. ++ * If the APM controller device hasn't probed yet, ERR_PTR(-EPROBE_DEFER) is ++ * returned. ++ */ ++struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev = NULL; ++ struct msm_apm_ctrl_dev *dev_found = ERR_PTR(-EPROBE_DEFER); ++ struct device_node *ctrl_node; ++ ++ if (!dev || !dev->of_node) { ++ pr_err("Invalid device node\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ ctrl_node = of_parse_phandle(dev->of_node, "qcom,apm-ctrl", 0); ++ if (!ctrl_node) { ++ pr_err("Could not find qcom,apm-ctrl property in %s\n", ++ dev->of_node->full_name); ++ return ERR_PTR(-ENXIO); ++ } ++ ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_for_each_entry(ctrl_dev, &apm_ctrl_list, list) { ++ if (ctrl_dev->dev && ctrl_dev->dev->of_node == ctrl_node) { ++ dev_found = ctrl_dev; ++ break; ++ } ++ } ++ mutex_unlock(&apm_ctrl_list_mutex); ++ ++ of_node_put(ctrl_node); ++ return dev_found; ++} ++EXPORT_SYMBOL(msm_apm_ctrl_dev_get); ++ ++#if defined(CONFIG_DEBUG_FS) ++ ++static int apm_supply_dbg_open(struct inode *inode, struct file *filep) ++{ ++ filep->private_data = inode->i_private; ++ ++ return 0; ++} ++ ++static ssize_t apm_supply_dbg_read(struct file *filep, char __user *ubuf, ++ size_t count, loff_t *ppos) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev = filep->private_data; ++ char buf[10]; ++ int len; ++ ++ if (!ctrl_dev) { ++ pr_err("invalid apm ctrl handle\n"); ++ return -ENODEV; ++ } ++ ++ if (ctrl_dev->supply == MSM_APM_SUPPLY_APCC) ++ len = snprintf(buf, sizeof(buf), "APCC\n"); ++ else if (ctrl_dev->supply == MSM_APM_SUPPLY_MX) ++ len = snprintf(buf, sizeof(buf), "MX\n"); ++ else ++ len = snprintf(buf, sizeof(buf), "ERR\n"); ++ ++ return simple_read_from_buffer(ubuf, count, ppos, buf, len); ++} ++ ++static const struct file_operations apm_supply_fops = { ++ .open = apm_supply_dbg_open, ++ .read = apm_supply_dbg_read, ++}; ++ ++static void apm_debugfs_base_init(void) ++{ ++ apm_debugfs_base = debugfs_create_dir("msm-apm", NULL); ++ ++ if (IS_ERR_OR_NULL(apm_debugfs_base)) ++ pr_err("msm-apm debugfs base directory creation failed\n"); ++} ++ ++static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ struct dentry *temp; ++ ++ if (IS_ERR_OR_NULL(apm_debugfs_base)) { ++ pr_err("Base directory missing, cannot create apm debugfs nodes\n"); ++ return; ++ } ++ ++ ctrl_dev->debugfs = debugfs_create_dir(dev_name(ctrl_dev->dev), ++ apm_debugfs_base); ++ if (IS_ERR_OR_NULL(ctrl_dev->debugfs)) { ++ pr_err("%s debugfs directory creation failed\n", ++ dev_name(ctrl_dev->dev)); ++ return; ++ } ++ ++ temp = debugfs_create_file("supply", S_IRUGO, ctrl_dev->debugfs, ++ ctrl_dev, &apm_supply_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ pr_err("supply mode creation failed\n"); ++ return; ++ } ++} ++ ++static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ if (!IS_ERR_OR_NULL(ctrl_dev->debugfs)) ++ debugfs_remove_recursive(ctrl_dev->debugfs); ++} ++ ++static void apm_debugfs_base_remove(void) ++{ ++ debugfs_remove_recursive(apm_debugfs_base); ++} ++#else ++ ++static void apm_debugfs_base_init(void) ++{} ++ ++static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev) ++{} ++ ++static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev) ++{} ++ ++static void apm_debugfs_base_remove(void) ++{} ++ ++#endif ++ ++static struct of_device_id msm_apm_match_table[] = { ++ { ++ .compatible = "qcom,msm-apm", ++ .data = (void *)(uintptr_t)MSM8996_ID, ++ }, ++ { ++ .compatible = "qcom,msm8953-apm", ++ .data = (void *)(uintptr_t)MSM8953_ID, ++ }, ++ { ++ .compatible = "qcom,ipq807x-apm", ++ .data = (void *)(uintptr_t)IPQ807x_ID, ++ }, ++ {} ++}; ++ ++static int msm_apm_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct msm_apm_ctrl_dev *ctrl; ++ const struct of_device_id *match; ++ int ret = 0; ++ ++ dev_dbg(dev, "probing MSM Array Power Mux driver\n"); ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -ENODEV; ++ } ++ ++ match = of_match_device(msm_apm_match_table, dev); ++ if (!match) ++ return -ENODEV; ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) { ++ dev_err(dev, "MSM APM controller memory allocation failed\n"); ++ return -ENOMEM; ++ } ++ ++ INIT_LIST_HEAD(&ctrl->list); ++ spin_lock_init(&ctrl->lock); ++ ctrl->dev = dev; ++ ctrl->msm_id = (uintptr_t)match->data; ++ platform_set_drvdata(pdev, ctrl); ++ ++ switch (ctrl->msm_id) { ++ case MSM8996_ID: ++ ret = msm_apm_ctrl_devm_ioremap(pdev, ctrl); ++ if (ret) { ++ dev_err(dev, "Failed to add APM controller device\n"); ++ return ret; ++ } ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_ctrl_init(pdev, ctrl); ++ if (ret) { ++ dev_err(dev, "Failed to initialize APM controller device: ret=%d\n", ++ ret); ++ return ret; ++ } ++ break; ++ default: ++ dev_err(dev, "unable to add APM controller device for msm_id:%d\n", ++ ctrl->msm_id); ++ return -ENODEV; ++ } ++ ++ apm_debugfs_init(ctrl); ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_add_tail(&ctrl->list, &apm_ctrl_list); ++ mutex_unlock(&apm_ctrl_list_mutex); ++ ++ dev_dbg(dev, "MSM Array Power Mux driver probe successful"); ++ ++ return ret; ++} ++ ++static int msm_apm_remove(struct platform_device *pdev) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev; ++ ++ ctrl_dev = platform_get_drvdata(pdev); ++ if (ctrl_dev) { ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_del(&ctrl_dev->list); ++ mutex_unlock(&apm_ctrl_list_mutex); ++ apm_debugfs_deinit(ctrl_dev); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver msm_apm_driver = { ++ .driver = { ++ .name = MSM_APM_DRIVER_NAME, ++ .of_match_table = msm_apm_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = msm_apm_probe, ++ .remove = msm_apm_remove, ++}; ++ ++static int __init msm_apm_init(void) ++{ ++ apm_debugfs_base_init(); ++ return platform_driver_register(&msm_apm_driver); ++} ++ ++static void __exit msm_apm_exit(void) ++{ ++ platform_driver_unregister(&msm_apm_driver); ++ apm_debugfs_base_remove(); ++} ++ ++arch_initcall(msm_apm_init); ++module_exit(msm_apm_exit); ++ ++MODULE_DESCRIPTION("MSM Array Power Mux driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/linux/power/qcom/apm.h +@@ -0,0 +1,48 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __LINUX_POWER_QCOM_APM_H__ ++#define __LINUX_POWER_QCOM_APM_H__ ++ ++#include <linux/device.h> ++#include <linux/err.h> ++ ++/** ++ * enum msm_apm_supply - supported power rails to supply memory arrays ++ * %MSM_APM_SUPPLY_APCC: to enable selection of VDD_APCC rail as supply ++ * %MSM_APM_SUPPLY_MX: to enable selection of VDD_MX rail as supply ++ */ ++enum msm_apm_supply { ++ MSM_APM_SUPPLY_APCC, ++ MSM_APM_SUPPLY_MX, ++}; ++ ++/* Handle used to identify an APM controller device */ ++struct msm_apm_ctrl_dev; ++ ++#ifdef CONFIG_QCOM_APM ++struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev); ++int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply); ++int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev); ++ ++#else ++static inline struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev) ++{ return ERR_PTR(-EPERM); } ++static inline int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply) ++{ return -EPERM; } ++static inline int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev) ++{ return -EPERM; } ++#endif ++#endif diff --git a/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch b/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch new file mode 100644 index 0000000000..3deadea139 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch @@ -0,0 +1,12147 @@ +From 303fb163bb86f04432c93325ff8b9638c9e50641 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Mon, 11 Apr 2022 14:35:36 +0200 +Subject: [PATCH] regulator: add Qualcomm CPR regulators + +Add Qualcomm CPR driver, which allows using the CPR HW to calculate the +correct OPP point voltage dynamically based on the system load. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/regulator/Kconfig | 33 + + drivers/regulator/Makefile | 3 + + drivers/regulator/cpr3-npu-regulator.c | 695 +++ + drivers/regulator/cpr3-regulator.c | 5112 +++++++++++++++++++++++ + drivers/regulator/cpr3-regulator.h | 1211 ++++++ + drivers/regulator/cpr3-util.c | 2750 ++++++++++++ + drivers/regulator/cpr4-apss-regulator.c | 1819 ++++++++ + include/soc/qcom/socinfo.h | 463 ++ + 8 files changed, 12086 insertions(+) + create mode 100644 drivers/regulator/cpr3-npu-regulator.c + create mode 100644 drivers/regulator/cpr3-regulator.c + create mode 100644 drivers/regulator/cpr3-regulator.h + create mode 100644 drivers/regulator/cpr3-util.c + create mode 100644 drivers/regulator/cpr4-apss-regulator.c + create mode 100644 include/soc/qcom/socinfo.h + +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -1423,5 +1423,38 @@ config REGULATOR_QCOM_LABIBB + boost regulator and IBB can be used as a negative boost regulator + for LCD display panel. + ++config REGULATOR_CPR3 ++ bool "QCOM CPR3 regulator core support" ++ help ++ This driver supports Core Power Reduction (CPR) version 3 controllers ++ which are used by some Qualcomm Technologies, Inc. SoCs to ++ manage important voltage regulators. CPR3 controllers are capable of ++ monitoring several ring oscillator sensing loops simultaneously. The ++ CPR3 controller informs software when the silicon conditions require ++ the supply voltage to be increased or decreased. On certain supply ++ rails, the CPR3 controller is able to propagate the voltage increase ++ or decrease requests all the way to the PMIC without software ++ involvement. ++ ++config REGULATOR_CPR3_NPU ++ bool "QCOM CPR3 regulator for NPU" ++ depends on OF && REGULATOR_CPR3 ++ help ++ This driver supports Qualcomm Technologies, Inc. NPU CPR3 ++ regulator Which will always operate in open loop. ++ ++config REGULATOR_CPR4_APSS ++ bool "QCOM CPR4 regulator for APSS" ++ depends on OF && REGULATOR_CPR3 ++ help ++ This driver supports Qualcomm Technologies, Inc. APSS application ++ processor specific features including memory array power mux (APM) ++ switching, one CPR4 thread which monitor the two APSS clusters that ++ are both powered by a shared supply, hardware closed-loop auto ++ voltage stepping, voltage adjustments based on online core count, ++ voltage adjustments based on temperature readings, and voltage ++ adjustments for performance boost mode. This driver reads both initial ++ voltage and CPR target quotient values out of hardware fuses. ++ + endif + +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -105,6 +105,9 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qco + obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o + obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o + obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o ++obj-$(CONFIG_REGULATOR_CPR3) += cpr3-regulator.o cpr3-util.o ++obj-$(CONFIG_REGULATOR_CPR3_NPU) += cpr3-npu-regulator.o ++obj-$(CONFIG_REGULATOR_CPR4_APSS) += cpr4-apss-regulator.o + obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o + obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o + obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o +--- /dev/null ++++ b/drivers/regulator/cpr3-npu-regulator.c +@@ -0,0 +1,695 @@ ++/* ++ * Copyright (c) 2017, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/slab.h> ++#include <linux/thermal.h> ++ ++#include "cpr3-regulator.h" ++ ++#define IPQ807x_NPU_FUSE_CORNERS 2 ++#define IPQ817x_NPU_FUSE_CORNERS 1 ++#define IPQ807x_NPU_FUSE_STEP_VOLT 8000 ++#define IPQ807x_NPU_VOLTAGE_FUSE_SIZE 6 ++#define IPQ807x_NPU_CPR_CLOCK_RATE 19200000 ++ ++#define IPQ807x_NPU_CPR_TCSR_START 6 ++#define IPQ807x_NPU_CPR_TCSR_END 7 ++ ++#define NPU_TSENS 5 ++ ++u32 g_valid_npu_fuse_count = IPQ807x_NPU_FUSE_CORNERS; ++/** ++ * struct cpr3_ipq807x_npu_fuses - NPU specific fuse data for IPQ807x ++ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value ++ * for each fuse corner (raw, not converted to a voltage) ++ * This struct holds the values for all of the fuses read from memory. ++ */ ++struct cpr3_ipq807x_npu_fuses { ++ u64 init_voltage[IPQ807x_NPU_FUSE_CORNERS]; ++}; ++ ++/* ++ * Constants which define the name of each fuse corner. ++ */ ++enum cpr3_ipq807x_npu_fuse_corner { ++ CPR3_IPQ807x_NPU_FUSE_CORNER_NOM = 0, ++ CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO = 1, ++}; ++ ++static const char * const cpr3_ipq807x_npu_fuse_corner_name[] = { ++ [CPR3_IPQ807x_NPU_FUSE_CORNER_NOM] = "NOM", ++ [CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO] = "TURBO", ++}; ++ ++/* ++ * IPQ807x NPU fuse parameter locations: ++ * ++ * Structs are organized with the following dimensions: ++ * Outer: 0 to 1 for fuse corners from lowest to highest corner ++ * Inner: large enough to hold the longest set of parameter segments which ++ * fully defines a fuse parameter, +1 (for NULL termination). ++ * Each segment corresponds to a contiguous group of bits from a ++ * single fuse row. These segments are concatentated together in ++ * order to form the full fuse parameter value. The segments for ++ * a given parameter may correspond to different fuse rows. ++ */ ++static struct cpr3_fuse_param ++ipq807x_npu_init_voltage_param[IPQ807x_NPU_FUSE_CORNERS][2] = { ++ {{73, 22, 27}, {} }, ++ {{73, 16, 21}, {} }, ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ++ipq807x_npu_fuse_ref_volt [IPQ807x_NPU_FUSE_CORNERS] = { ++ 912000, ++ 992000, ++}; ++ ++/* ++ * IPQ9574 (Few parameters are changed, remaining are same as IPQ807x) ++ */ ++#define IPQ9574_NPU_FUSE_CORNERS 2 ++#define IPQ9574_NPU_FUSE_STEP_VOLT 10000 ++#define IPQ9574_NPU_CPR_CLOCK_RATE 24000000 ++ ++/* ++ * fues parameters for IPQ9574 ++ */ ++static struct cpr3_fuse_param ++ipq9574_npu_init_voltage_param[IPQ9574_NPU_FUSE_CORNERS][2] = { ++ {{105, 12, 17}, {} }, ++ {{105, 6, 11}, {} }, ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ9574 ++ */ ++static int ++ipq9574_npu_fuse_ref_volt [IPQ9574_NPU_FUSE_CORNERS] = { ++ 862500, ++ 987500, ++}; ++ ++struct cpr3_controller *g_ctrl; ++ ++void cpr3_npu_temp_notify(int sensor, int temp, int low_notif) ++{ ++ u32 prev_sensor_state; ++ ++ if (sensor != NPU_TSENS) ++ return; ++ ++ prev_sensor_state = g_ctrl->cur_sensor_state; ++ if (low_notif) ++ g_ctrl->cur_sensor_state |= BIT(sensor); ++ else ++ g_ctrl->cur_sensor_state &= ~BIT(sensor); ++ ++ if (!prev_sensor_state && g_ctrl->cur_sensor_state) ++ cpr3_handle_temp_open_loop_adjustment(g_ctrl, true); ++ else if (prev_sensor_state && !g_ctrl->cur_sensor_state) ++ cpr3_handle_temp_open_loop_adjustment(g_ctrl, false); ++} ++ ++/** ++ * cpr3_ipq807x_npu_read_fuse_data() - load NPU specific fuse parameter values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function allocates a cpr3_ipq807x_npu_fuses struct, fills it with ++ * values read out of hardware fuses, and finally copies common fuse values ++ * into the CPR3 regulator struct. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_ipq807x_npu_read_fuse_data(struct cpr3_regulator *vreg) ++{ ++ void __iomem *base = vreg->thread->ctrl->fuse_base; ++ struct cpr3_ipq807x_npu_fuses *fuse; ++ int i, rc; ++ ++ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL); ++ if (!fuse) ++ return -ENOMEM; ++ ++ for (i = 0; i < g_valid_npu_fuse_count; i++) { ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr3_regulator_data->init_voltage_param[i], ++ &fuse->init_voltage[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ } ++ ++ vreg->fuse_corner_count = g_valid_npu_fuse_count; ++ vreg->platform_fuses = fuse; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_npu_parse_corner_data() - parse NPU corner data from device tree ++ * properties of the CPR3 regulator's device node ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_parse_corner_data(struct cpr3_regulator *vreg) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_ipq807x_npu_calculate_open_loop_voltages() - calculate the open-loop ++ * voltage for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @temp_correction: Temperature based correction ++ * ++ * If open-loop voltage interpolation is allowed in device tree, then ++ * this function calculates the open-loop voltage for a given corner using ++ * linear interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with their fused ++ * open-loop voltages. ++ * ++ * If open-loop voltage interpolation is not allowed, then this function uses ++ * the Fmax fused open-loop voltage for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_ipq807x_npu_calculate_open_loop_voltages( ++ struct cpr3_regulator *vreg, bool temp_correction) ++{ ++ struct cpr3_ipq807x_npu_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int i, j, rc = 0; ++ u64 freq_low, volt_low, freq_high, volt_high; ++ int *fuse_volt; ++ int *fmax_corner; ++ ++ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ if (!fuse_volt || !fmax_corner) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (ctrl->cpr_global_setting == CPR_DISABLED) ++ fuse_volt[i] = vreg->cpr3_regulator_data->fuse_ref_volt[i]; ++ else ++ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr3_regulator_data->fuse_ref_volt[i], ++ vreg->cpr3_regulator_data->fuse_step_volt, ++ fuse->init_voltage[i], ++ IPQ807x_NPU_VOLTAGE_FUSE_SIZE); ++ ++ /* Log fused open-loop voltage values for debugging purposes. */ ++ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n", ++ cpr3_ipq807x_npu_fuse_corner_name[i], ++ fuse_volt[i]); ++ } ++ ++ rc = cpr3_determine_part_type(vreg, ++ fuse_volt[CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO]); ++ if (rc) { ++ cpr3_err(vreg, ++ "fused part type detection failed failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, ++ "fused open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ if (temp_correction) { ++ rc = cpr3_determine_temp_base_open_loop_correction(vreg, ++ fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, ++ "temp open-loop voltage adj. failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ if (fuse_volt[i] < fuse_volt[i - 1]) { ++ cpr3_info(vreg, ++ "fuse corner %d voltage=%d uV < fuse corner %d \ ++ voltage=%d uV; overriding: fuse corner %d \ ++ voltage=%d\n", ++ i, fuse_volt[i], i - 1, fuse_volt[i - 1], ++ i, fuse_volt[i - 1]); ++ fuse_volt[i] = fuse_volt[i - 1]; ++ } ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ for (i = 0; i <= fmax_corner[0]; i++) ++ vreg->corner[i].open_loop_volt = fuse_volt[0]; ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ volt_low = fuse_volt[i - 1]; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ volt_high = fuse_volt[i]; ++ ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].open_loop_volt = cpr3_interpolate( ++ freq_low, volt_low, freq_high, volt_high, ++ vreg->corner[j].proc_freq); ++ } ++ ++done: ++ if (rc == 0) { ++ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n"); ++ for (i = 0; i < vreg->corner_count; i++) ++ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i, ++ vreg->corner[i].open_loop_volt); ++ ++ rc = cpr3_adjust_open_loop_voltages(vreg); ++ if (rc) ++ cpr3_err(vreg, ++ "open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ } ++ ++ kfree(fuse_volt); ++ kfree(fmax_corner); ++ return rc; ++} ++ ++/** ++ * cpr3_npu_print_settings() - print out NPU CPR configuration settings into ++ * the kernel log for debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++static void cpr3_npu_print_settings(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_corner *corner; ++ int i; ++ ++ cpr3_debug(vreg, ++ "Corner: Frequency (Hz), Fuse Corner, Floor (uV), \ ++ Open-Loop (uV), Ceiling (uV)\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n", ++ i, corner->proc_freq, corner->cpr_fuse_corner, ++ corner->floor_volt, corner->open_loop_volt, ++ corner->ceiling_volt); ++ } ++ ++ if (vreg->thread->ctrl->apm) ++ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n", ++ vreg->thread->ctrl->apm_threshold_volt, ++ vreg->thread->ctrl->apm_adj_volt); ++} ++ ++/** ++ * cpr3_ipq807x_npu_calc_temp_based_ol_voltages() - Calculate the open loop ++ * voltages based on temperature based correction margins ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++ ++static int ++cpr3_ipq807x_npu_calc_temp_based_ol_voltages(struct cpr3_regulator *vreg, ++ bool temp_correction) ++{ ++ int rc, i; ++ ++ rc = cpr3_ipq807x_npu_calculate_open_loop_voltages(vreg, ++ temp_correction); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr3_limit_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr3_open_loop_voltage_as_ceiling(vreg); ++ ++ rc = cpr3_limit_floor_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (temp_correction) ++ vreg->corner[i].cold_temp_open_loop_volt = ++ vreg->corner[i].open_loop_volt; ++ else ++ vreg->corner[i].normal_temp_open_loop_volt = ++ vreg->corner[i].open_loop_volt; ++ } ++ ++ cpr3_npu_print_settings(vreg); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_npu_init_thread() - perform steps necessary to initialize the ++ * configuration data for a CPR3 thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_thread(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_thread_data(thread); ++ if (rc) { ++ cpr3_err(thread->ctrl, ++ "thread %u CPR thread data from DT- failed, rc=%d\n", ++ thread->thread_id, rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_npu_init_regulator() - perform all steps necessary to initialize the ++ * configuration data for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_regulator(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_ipq807x_npu_fuses *fuse; ++ int rc, cold_temp = 0; ++ bool can_adj_cold_temp = cpr3_can_adjust_cold_temp(vreg); ++ ++ rc = cpr3_ipq807x_npu_read_fuse_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ fuse = vreg->platform_fuses; ++ ++ rc = cpr3_npu_parse_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, ++ "Cannot read CPR corner data from DT, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr3_mem_acc_init(vreg); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(vreg, ++ "Cannot initialize mem-acc regulator settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (can_adj_cold_temp) { ++ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, true); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, false); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ if (can_adj_cold_temp) { ++ cpr3_info(vreg, ++ "Normal and Cold condition init done. Default to normal.\n"); ++ ++ rc = cpr3_get_cold_temp_threshold(vreg, &cold_temp); ++ if (rc) { ++ cpr3_err(vreg, ++ "Get cold temperature threshold failed, rc=%d\n", rc); ++ return rc; ++ } ++ register_low_temp_notif(NPU_TSENS, cold_temp, ++ cpr3_npu_temp_notify); ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_npu_init_controller() - perform NPU CPR3 controller specific ++ * initializations ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_controller(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_open_loop_common_ctrl_data(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR3; ++ ctrl->supports_hw_closed_loop = false; ++ ++ return 0; ++} ++ ++static const struct cpr3_reg_data ipq807x_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ807x_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq807x_npu_init_voltage_param, ++ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE, ++}; ++ ++static const struct cpr3_reg_data ipq817x_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ817x_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq807x_npu_init_voltage_param, ++ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE, ++}; ++ ++static const struct cpr3_reg_data ipq9574_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ9574_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq9574_npu_init_voltage_param, ++ .fuse_ref_volt = ipq9574_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ9574_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ9574_NPU_CPR_CLOCK_RATE, ++}; ++ ++static struct of_device_id cpr3_regulator_match_table[] = { ++ { ++ .compatible = "qcom,cpr3-ipq807x-npu-regulator", ++ .data = &ipq807x_cpr_npu ++ }, ++ { ++ .compatible = "qcom,cpr3-ipq817x-npu-regulator", ++ .data = &ipq817x_cpr_npu ++ }, ++ { ++ .compatible = "qcom,cpr3-ipq9574-npu-regulator", ++ .data = &ipq9574_cpr_npu ++ }, ++ {} ++}; ++ ++static int cpr3_npu_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_controller *ctrl; ++ int i, rc; ++ const struct of_device_id *match; ++ struct cpr3_reg_data *cpr_data; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -EINVAL; ++ } ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) ++ return -ENOMEM; ++ g_ctrl = ctrl; ++ ++ match = of_match_device(cpr3_regulator_match_table, &pdev->dev); ++ if (!match) ++ return -ENODEV; ++ ++ cpr_data = (struct cpr3_reg_data *)match->data; ++ g_valid_npu_fuse_count = cpr_data->cpr_valid_fuse_count; ++ dev_info(dev, "NPU CPR valid fuse count: %d\n", g_valid_npu_fuse_count); ++ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate; ++ ++ ctrl->dev = dev; ++ /* Set to false later if anything precludes CPR operation. */ ++ ctrl->cpr_allowed_hw = true; ++ ++ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name", ++ &ctrl->name); ++ if (rc) { ++ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_map_fuse_base(ctrl, pdev); ++ if (rc) { ++ cpr3_err(ctrl, "could not map fuse base address\n"); ++ return rc; ++ } ++ ++ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_NPU_CPR_TCSR_START, ++ IPQ807x_NPU_CPR_TCSR_END); ++ if (rc) { ++ cpr3_err(ctrl, "could not read CPR tcsr rsetting\n"); ++ return rc; ++ } ++ ++ rc = cpr3_allocate_threads(ctrl, 0, 0); ++ if (rc) { ++ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread_count != 1) { ++ cpr3_err(ctrl, "expected 1 thread but found %d\n", ++ ctrl->thread_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_npu_init_controller(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_npu_init_thread(&ctrl->thread[0]); ++ if (rc) { ++ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread[0].vreg_count; i++) { ++ ctrl->thread[0].vreg[i].cpr3_regulator_data = cpr_data; ++ rc = cpr3_npu_init_regulator(&ctrl->thread[0].vreg[i]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ platform_set_drvdata(pdev, ctrl); ++ ++ return cpr3_open_loop_regulator_register(pdev, ctrl); ++} ++ ++static int cpr3_npu_regulator_remove(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_open_loop_regulator_unregister(ctrl); ++} ++ ++static struct platform_driver cpr3_npu_regulator_driver = { ++ .driver = { ++ .name = "qcom,cpr3-npu-regulator", ++ .of_match_table = cpr3_regulator_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = cpr3_npu_regulator_probe, ++ .remove = cpr3_npu_regulator_remove, ++}; ++ ++static int cpr3_regulator_init(void) ++{ ++ return platform_driver_register(&cpr3_npu_regulator_driver); ++} ++arch_initcall(cpr3_regulator_init); ++ ++static void cpr3_regulator_exit(void) ++{ ++ platform_driver_unregister(&cpr3_npu_regulator_driver); ++} ++module_exit(cpr3_regulator_exit); ++ ++MODULE_DESCRIPTION("QCOM CPR3 NPU regulator driver"); ++MODULE_LICENSE("Dual BSD/GPLv2"); ++MODULE_ALIAS("platform:npu-ipq807x"); +--- /dev/null ++++ b/drivers/regulator/cpr3-regulator.c +@@ -0,0 +1,5112 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include <linux/bitops.h> ++#include <linux/debugfs.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/ktime.h> ++#include <linux/list.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/platform_device.h> ++#include <linux/pm_opp.h> ++#include <linux/slab.h> ++#include <linux/sort.h> ++#include <linux/string.h> ++#include <linux/uaccess.h> ++#include <linux/regulator/driver.h> ++#include <linux/regulator/machine.h> ++#include <linux/regulator/of_regulator.h> ++#include <linux/panic_notifier.h> ++ ++#include "cpr3-regulator.h" ++ ++#define CPR3_REGULATOR_CORNER_INVALID (-1) ++#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0) ++ ++/* CPR3 registers */ ++#define CPR3_REG_CPR_CTL 0x4 ++#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0) ++#define CPR3_CPR_CTL_LOOP_ENABLE BIT(0) ++#define CPR3_CPR_CTL_LOOP_DISABLE 0 ++#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1) ++#define CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT 1 ++#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6) ++#define CPR3_CPR_CTL_COUNT_MODE_SHIFT 6 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1 ++#define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3 ++#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9) ++#define CPR3_CPR_CTL_COUNT_REPEAT_SHIFT 9 ++ ++#define CPR3_REG_CPR_STATUS 0x8 ++#define CPR3_CPR_STATUS_BUSY_MASK BIT(0) ++#define CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK BIT(1) ++ ++/* ++ * This register is not present on controllers that support HW closed-loop ++ * except CPR4 APSS controller. ++ */ ++#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC ++ ++#define CPR3_REG_CPR_STEP_QUOT 0x14 ++#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0) ++#define CPR3_CPR_STEP_QUOT_MIN_SHIFT 0 ++#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6) ++#define CPR3_CPR_STEP_QUOT_MAX_SHIFT 6 ++ ++#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro)) ++ ++#define CPR3_REG_SENSOR_BYPASS_WRITE(sensor) (0xE0 + 0x4 * ((sensor) / 32)) ++#define CPR3_REG_SENSOR_BYPASS_WRITE_BANK(bank) (0xE0 + 0x4 * (bank)) ++ ++#define CPR3_REG_SENSOR_MASK_WRITE(sensor) (0x120 + 0x4 * ((sensor) / 32)) ++#define CPR3_REG_SENSOR_MASK_WRITE_BANK(bank) (0x120 + 0x4 * (bank)) ++#define CPR3_REG_SENSOR_MASK_READ(sensor) (0x140 + 0x4 * ((sensor) / 32)) ++ ++#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor)) ++ ++#define CPR3_REG_CONT_CMD 0x800 ++#define CPR3_CONT_CMD_ACK 0x1 ++#define CPR3_CONT_CMD_NACK 0x0 ++ ++#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread)) ++#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0) ++#define CPR3_THRESH_CONS_DOWN_SHIFT 0 ++#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4) ++#define CPR3_THRESH_CONS_UP_SHIFT 4 ++#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8) ++#define CPR3_THRESH_DOWN_THRESH_SHIFT 8 ++#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13) ++#define CPR3_THRESH_UP_THRESH_SHIFT 13 ++ ++#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread)) ++ ++#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread)) ++#define CPR3_RESULT0_BUSY_MASK BIT(0) ++#define CPR3_RESULT0_STEP_DN_MASK BIT(1) ++#define CPR3_RESULT0_STEP_UP_MASK BIT(2) ++#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3) ++#define CPR3_RESULT0_ERROR_STEPS_SHIFT 3 ++#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8) ++#define CPR3_RESULT0_ERROR_SHIFT 8 ++#define CPR3_RESULT0_NEGATIVE_MASK BIT(20) ++ ++#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread)) ++#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0) ++#define CPR3_RESULT1_QUOT_MIN_SHIFT 0 ++#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12) ++#define CPR3_RESULT1_QUOT_MAX_SHIFT 12 ++#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24) ++#define CPR3_RESULT1_RO_MIN_SHIFT 24 ++#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28) ++#define CPR3_RESULT1_RO_MAX_SHIFT 28 ++ ++#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread)) ++#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0) ++#define CPR3_RESULT2_STEP_QUOT_MIN_SHIFT 0 ++#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6) ++#define CPR3_RESULT2_STEP_QUOT_MAX_SHIFT 6 ++#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16) ++#define CPR3_RESULT2_SENSOR_MIN_SHIFT 16 ++#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24) ++#define CPR3_RESULT2_SENSOR_MAX_SHIFT 24 ++ ++#define CPR3_REG_IRQ_EN 0x81C ++#define CPR3_REG_IRQ_CLEAR 0x820 ++#define CPR3_REG_IRQ_STATUS 0x824 ++#define CPR3_IRQ_UP BIT(3) ++#define CPR3_IRQ_MID BIT(2) ++#define CPR3_IRQ_DOWN BIT(1) ++ ++#define CPR3_REG_TARGET_QUOT(thread, ro) \ ++ (0x840 + 0x440 * (thread) + 0x4 * (ro)) ++ ++/* Registers found only on controllers that support HW closed-loop. */ ++#define CPR3_REG_PD_THROTTLE 0xE8 ++#define CPR3_PD_THROTTLE_DISABLE 0x0 ++ ++#define CPR3_REG_HW_CLOSED_LOOP 0x3000 ++#define CPR3_HW_CLOSED_LOOP_ENABLE 0x0 ++#define CPR3_HW_CLOSED_LOOP_DISABLE 0x1 ++ ++#define CPR3_REG_CPR_TIMER_MID_CONT 0x3004 ++#define CPR3_REG_CPR_TIMER_UP_DN_CONT 0x3008 ++ ++#define CPR3_REG_LAST_MEASUREMENT 0x7F8 ++#define CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT 0 ++#define CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT 4 ++#define CPR3_LAST_MEASUREMENT_THREAD_DN(thread) \ ++ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT) ++#define CPR3_LAST_MEASUREMENT_THREAD_UP(thread) \ ++ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT) ++#define CPR3_LAST_MEASUREMENT_AGGR_DN BIT(8) ++#define CPR3_LAST_MEASUREMENT_AGGR_MID BIT(9) ++#define CPR3_LAST_MEASUREMENT_AGGR_UP BIT(10) ++#define CPR3_LAST_MEASUREMENT_VALID BIT(11) ++#define CPR3_LAST_MEASUREMENT_SAW_ERROR BIT(12) ++#define CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK GENMASK(23, 16) ++#define CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT 16 ++ ++/* CPR4 controller specific registers and bit definitions */ ++#define CPR4_REG_CPR_TIMER_CLAMP 0x10 ++#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27) ++ ++#define CPR4_REG_MISC 0x700 ++#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK GENMASK(23, 20) ++#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT 20 ++#define CPR4_MISC_TEMP_SENSOR_ID_START_MASK GENMASK(27, 24) ++#define CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT 24 ++#define CPR4_MISC_TEMP_SENSOR_ID_END_MASK GENMASK(31, 28) ++#define CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT 28 ++ ++#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4 ++#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0) ++#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0 ++#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5) ++#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5 ++ ++#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8 ++#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18) ++#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT 18 ++ ++#define CPR4_REG_MARGIN_TEMP_CORE(core) (0x7AC + 0x4 * (core)) ++#define CPR4_MARGIN_TEMP_CORE_ADJ_MASK GENMASK(7, 0) ++#define CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT 8 ++ ++#define CPR4_REG_MARGIN_TEMP_POINT0N1 0x7F0 ++#define CPR4_MARGIN_TEMP_POINT0_MASK GENMASK(11, 0) ++#define CPR4_MARGIN_TEMP_POINT0_SHIFT 0 ++#define CPR4_MARGIN_TEMP_POINT1_MASK GENMASK(23, 12) ++#define CPR4_MARGIN_TEMP_POINT1_SHIFT 12 ++#define CPR4_REG_MARGIN_TEMP_POINT2 0x7F4 ++#define CPR4_MARGIN_TEMP_POINT2_MASK GENMASK(11, 0) ++#define CPR4_MARGIN_TEMP_POINT2_SHIFT 0 ++ ++#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8 ++#define CPR4_MARGIN_ADJ_CTL_BOOST_EN BIT(0) ++#define CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN BIT(1) ++#define CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN BIT(2) ++#define CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN BIT(3) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK BIT(4) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE BIT(4) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE 0 ++#define CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN BIT(7) ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN BIT(8) ++#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK GENMASK(16, 12) ++#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT 12 ++#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK GENMASK(21, 19) ++#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT 19 ++#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK GENMASK(25, 22) ++#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT 22 ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK GENMASK(31, 26) ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT 26 ++ ++#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread)) ++#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31) ++#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0) ++ ++/* ++ * The amount of time to wait for the CPR controller to become idle when ++ * performing an aging measurement. ++ */ ++#define CPR3_AGING_MEASUREMENT_TIMEOUT_NS 5000000 ++ ++/* ++ * The number of individual aging measurements to perform which are then ++ * averaged together in order to determine the final aging adjustment value. ++ */ ++#define CPR3_AGING_MEASUREMENT_ITERATIONS 16 ++ ++/* ++ * Aging measurements for the aged and unaged ring oscillators take place a few ++ * microseconds apart. If the vdd-supply voltage fluctuates between the two ++ * measurements, then the difference between them will be incorrect. The ++ * difference could end up too high or too low. This constant defines the ++ * number of lowest and highest measurements to ignore when averaging. ++ */ ++#define CPR3_AGING_MEASUREMENT_FILTER 3 ++ ++/* ++ * The number of times to attempt the full aging measurement sequence before ++ * declaring a measurement failure. ++ */ ++#define CPR3_AGING_RETRY_COUNT 5 ++ ++/* ++ * The maximum time to wait in microseconds for a CPR register write to ++ * complete. ++ */ ++#define CPR3_REGISTER_WRITE_DELAY_US 200 ++ ++static DEFINE_MUTEX(cpr3_controller_list_mutex); ++static LIST_HEAD(cpr3_controller_list); ++static struct dentry *cpr3_debugfs_base; ++ ++/** ++ * cpr3_read() - read four bytes from the memory address specified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * ++ * Return: memory address value ++ */ ++static inline u32 cpr3_read(struct cpr3_controller *ctrl, u32 offset) ++{ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register reads are not possible when CPR clocks are disabled\n"); ++ return 0; ++ } ++ ++ return readl_relaxed(ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_write() - write four bytes to the memory address specified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * @value: Value to write to the memory address ++ * ++ * Return: none ++ */ ++static inline void cpr3_write(struct cpr3_controller *ctrl, u32 offset, ++ u32 value) ++{ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n"); ++ return; ++ } ++ ++ writel_relaxed(value, ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_masked_write() - perform a read-modify-write sequence so that only ++ * masked bits are modified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * @mask: Mask identifying the bits that should be modified ++ * @value: Value to write to the memory address ++ * ++ * Return: none ++ */ ++static inline void cpr3_masked_write(struct cpr3_controller *ctrl, u32 offset, ++ u32 mask, u32 value) ++{ ++ u32 reg_val, orig_val; ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n"); ++ return; ++ } ++ ++ reg_val = orig_val = readl_relaxed(ctrl->cpr_ctrl_base + offset); ++ reg_val &= ~mask; ++ reg_val |= value & mask; ++ ++ if (reg_val != orig_val) ++ writel_relaxed(reg_val, ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_ctrl_loop_enable() - enable the CPR sensing loop for a given controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static inline void cpr3_ctrl_loop_enable(struct cpr3_controller *ctrl) ++{ ++ if (ctrl->cpr_enabled && !(ctrl->aggr_corner.sdelta ++ && ctrl->aggr_corner.sdelta->allow_boost)) ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_ENABLE); ++} ++ ++/** ++ * cpr3_ctrl_loop_disable() - disable the CPR sensing loop for a given ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static inline void cpr3_ctrl_loop_disable(struct cpr3_controller *ctrl) ++{ ++ if (ctrl->cpr_enabled) ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_DISABLE); ++} ++ ++/** ++ * cpr3_clock_enable() - prepare and enable all clocks used by this CPR3 ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_clock_enable(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = clk_prepare_enable(ctrl->bus_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable bus clock, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = clk_prepare_enable(ctrl->iface_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable interface clock, rc=%d\n", rc); ++ clk_disable_unprepare(ctrl->bus_clk); ++ return rc; ++ } ++ ++ rc = clk_prepare_enable(ctrl->core_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable core clock, rc=%d\n", rc); ++ clk_disable_unprepare(ctrl->iface_clk); ++ clk_disable_unprepare(ctrl->bus_clk); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_clock_disable() - disable and unprepare all clocks used by this CPR3 ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static void cpr3_clock_disable(struct cpr3_controller *ctrl) ++{ ++ clk_disable_unprepare(ctrl->core_clk); ++ clk_disable_unprepare(ctrl->iface_clk); ++ clk_disable_unprepare(ctrl->bus_clk); ++} ++ ++/** ++ * cpr3_ctrl_clear_cpr4_config() - clear the CPR4 register configuration ++ * programmed for current aggregated corner of a given controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static inline int cpr3_ctrl_clear_cpr4_config(struct cpr3_controller *ctrl) ++{ ++ struct cpr4_sdelta *aggr_sdelta = ctrl->aggr_corner.sdelta; ++ bool cpr_enabled = ctrl->cpr_enabled; ++ int i, rc = 0; ++ ++ if (!aggr_sdelta || !(aggr_sdelta->allow_core_count_adj ++ || aggr_sdelta->allow_temp_adj || aggr_sdelta->allow_boost)) ++ /* cpr4 features are not enabled */ ++ return 0; ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ /* ++ * Clear feature enable configuration made for current ++ * aggregated corner. ++ */ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK ++ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_BOOST_EN ++ | CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, 0); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK, ++ 0 << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT); ++ ++ for (i = 0; i <= aggr_sdelta->max_core_count; i++) { ++ /* Clear voltage margin adjustments programmed in TEMP_COREi */ ++ cpr3_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE(i), 0); ++ } ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_closed_loop_enable() - enable logical CPR closed-loop operation ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_closed_loop_enable(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ if (!ctrl->cpr_allowed_hw || !ctrl->cpr_allowed_sw) { ++ cpr3_err(ctrl, "cannot enable closed-loop CPR operation because it is disallowed\n"); ++ return -EPERM; ++ } else if (ctrl->cpr_enabled) { ++ /* Already enabled */ ++ return 0; ++ } else if (ctrl->cpr_suspended) { ++ /* ++ * CPR must remain disabled as the system is entering suspend. ++ */ ++ return 0; ++ } ++ ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to enable CPR clocks, rc=%d\n", rc); ++ return rc; ++ } ++ ++ ctrl->cpr_enabled = true; ++ cpr3_debug(ctrl, "CPR closed-loop operation enabled\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_closed_loop_disable() - disable logical CPR closed-loop operation ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static inline int cpr3_closed_loop_disable(struct cpr3_controller *ctrl) ++{ ++ if (!ctrl->cpr_enabled) { ++ /* Already disabled */ ++ return 0; ++ } ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ cpr3_debug(ctrl, "CPR closed-loop operation disabled\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_get_gcnt() - returns the GCNT register value corresponding ++ * to the clock rate and sensor time of the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: GCNT value ++ */ ++static u32 cpr3_regulator_get_gcnt(struct cpr3_controller *ctrl) ++{ ++ u64 temp; ++ unsigned int remainder; ++ u32 gcnt; ++ ++ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->sensor_time; ++ remainder = do_div(temp, 1000000000); ++ if (remainder) ++ temp++; ++ /* ++ * GCNT == 0 corresponds to a single ref clock measurement interval so ++ * offset GCNT values by 1. ++ */ ++ gcnt = temp - 1; ++ ++ return gcnt; ++} ++ ++/** ++ * cpr3_regulator_init_thread() - performs hardware initialization of CPR ++ * thread registers ++ * @thread: Pointer to the CPR3 thread ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_thread(struct cpr3_thread *thread) ++{ ++ u32 reg; ++ ++ reg = (thread->consecutive_up << CPR3_THRESH_CONS_UP_SHIFT) ++ & CPR3_THRESH_CONS_UP_MASK; ++ reg |= (thread->consecutive_down << CPR3_THRESH_CONS_DOWN_SHIFT) ++ & CPR3_THRESH_CONS_DOWN_MASK; ++ reg |= (thread->up_threshold << CPR3_THRESH_UP_THRESH_SHIFT) ++ & CPR3_THRESH_UP_THRESH_MASK; ++ reg |= (thread->down_threshold << CPR3_THRESH_DOWN_THRESH_SHIFT) ++ & CPR3_THRESH_DOWN_THRESH_MASK; ++ ++ cpr3_write(thread->ctrl, CPR3_REG_THRESH(thread->thread_id), reg); ++ ++ /* ++ * Mask all RO's initially so that unused thread doesn't contribute ++ * to closed-loop voltage. ++ */ ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ CPR3_RO_MASK); ++ ++ return 0; ++} ++ ++/** ++ * cpr4_regulator_init_temp_points() - performs hardware initialization of CPR4 ++ * registers to track tsen temperature data and also specify the ++ * temperature band range values to apply different voltage margins ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_regulator_init_temp_points(struct cpr3_controller *ctrl) ++{ ++ if (!ctrl->allow_temp_adj) ++ return 0; ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_TEMP_SENSOR_ID_START_MASK, ++ ctrl->temp_sensor_id_start ++ << CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_TEMP_SENSOR_ID_END_MASK, ++ ctrl->temp_sensor_id_end ++ << CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT2, ++ CPR4_MARGIN_TEMP_POINT2_MASK, ++ (ctrl->temp_band_count == 4 ? ctrl->temp_points[2] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT2_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1, ++ CPR4_MARGIN_TEMP_POINT1_MASK, ++ (ctrl->temp_band_count >= 3 ? ctrl->temp_points[1] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT1_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1, ++ CPR4_MARGIN_TEMP_POINT0_MASK, ++ (ctrl->temp_band_count >= 2 ? ctrl->temp_points[0] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT0_SHIFT); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_cpr4() - performs hardware initialization at the ++ * controller and thread level required for CPR4 operation. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * This function allocates sdelta structures and sdelta tables for aggregated ++ * corners of the controller and its threads. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_cpr4(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ struct cpr4_sdelta *sdelta; ++ int i, j, ctrl_max_core_count, thread_max_core_count, rc = 0; ++ bool ctrl_valid_sdelta, thread_valid_sdelta; ++ u32 pmic_step_size = 1; ++ int thread_id = 0; ++ u64 temp; ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->saw_use_unit_mV) ++ pmic_step_size = ctrl->step_volt / 1000; ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK, ++ (pmic_step_size ++ << CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT, ++ CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK, ++ (ctrl->down_error_step_limit ++ << CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT, ++ CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK, ++ (ctrl->up_error_step_limit ++ << CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT)); ++ ++ /* ++ * Enable thread aggregation regardless of which threads are ++ * enabled or disabled. ++ */ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_TIMER_CLAMP, ++ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN, ++ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN); ++ ++ switch (ctrl->thread_count) { ++ case 0: ++ /* Disable both threads */ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(0), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(1), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ break; ++ case 1: ++ /* Disable unused thread */ ++ thread_id = ctrl->thread[0].thread_id ? 0 : 1; ++ cpr3_masked_write(ctrl, ++ CPR4_REG_CPR_MASK_THREAD(thread_id), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ break; ++ } ++ } ++ ++ if (!ctrl->allow_core_count_adj && !ctrl->allow_temp_adj ++ && !ctrl->allow_boost) { ++ /* ++ * Skip below configuration as none of the features ++ * are enabled. ++ */ ++ return rc; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN, ++ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK, ++ ctrl->step_quot_fixed ++ << CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN, ++ (ctrl->use_dynamic_step_quot ++ ? CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN : 0)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK, ++ ctrl->initial_temp_band ++ << CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT); ++ ++ rc = cpr4_regulator_init_temp_points(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "initialize temp points failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ if (ctrl->voltage_settling_time) { ++ /* ++ * Configure the settling timer used to account for ++ * one VDD supply step. ++ */ ++ temp = (u64)ctrl->cpr_clock_rate ++ * (u64)ctrl->voltage_settling_time; ++ do_div(temp, 1000000000); ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE_TIMERS, ++ CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK, ++ temp ++ << CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT); ++ } ++ ++ /* ++ * Allocate memory for cpr4_sdelta structure and sdelta table for ++ * controller aggregated corner by finding the maximum core count ++ * used by any cpr3 regulators. ++ */ ++ ctrl_max_core_count = 1; ++ ctrl_valid_sdelta = false; ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ ++ /* ++ * Allocate memory for cpr4_sdelta structure and sdelta table ++ * for thread aggregated corner by finding the maximum core ++ * count used by any cpr3 regulators of the thread. ++ */ ++ thread_max_core_count = 1; ++ thread_valid_sdelta = false; ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ thread_max_core_count = max(thread_max_core_count, ++ vreg->max_core_count); ++ thread_valid_sdelta |= (vreg->allow_core_count_adj ++ | vreg->allow_temp_adj ++ | vreg->allow_boost); ++ } ++ if (thread_valid_sdelta) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta), ++ GFP_KERNEL); ++ if (!sdelta) ++ return -ENOMEM; ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, ++ thread_max_core_count ++ * ctrl->temp_band_count, ++ sizeof(*sdelta->table), ++ GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ sdelta->boost_table = devm_kcalloc(ctrl->dev, ++ ctrl->temp_band_count, ++ sizeof(*sdelta->boost_table), ++ GFP_KERNEL); ++ if (!sdelta->boost_table) ++ return -ENOMEM; ++ ++ thread->aggr_corner.sdelta = sdelta; ++ } ++ ++ ctrl_valid_sdelta |= thread_valid_sdelta; ++ ctrl_max_core_count = max(ctrl_max_core_count, ++ thread_max_core_count); ++ } ++ ++ if (ctrl_valid_sdelta) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta), GFP_KERNEL); ++ if (!sdelta) ++ return -ENOMEM; ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, ctrl_max_core_count ++ * ctrl->temp_band_count, ++ sizeof(*sdelta->table), GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ sdelta->boost_table = devm_kcalloc(ctrl->dev, ++ ctrl->temp_band_count, ++ sizeof(*sdelta->boost_table), ++ GFP_KERNEL); ++ if (!sdelta->boost_table) ++ return -ENOMEM; ++ ++ ctrl->aggr_corner.sdelta = sdelta; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_write_temp_core_margin() - programs hardware SDELTA registers with ++ * the voltage margin adjustments that need to be applied for ++ * different online core-count and temperature bands. ++ * @ctrl: Pointer to the CPR3 controller ++ * @addr: SDELTA register address ++ * @temp_core_adj: Array of voltage margin values for different temperature ++ * bands. ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: none ++ */ ++static void cpr3_write_temp_core_margin(struct cpr3_controller *ctrl, ++ int addr, int *temp_core_adj) ++{ ++ int i, margin_steps; ++ u32 reg = 0; ++ ++ for (i = 0; i < ctrl->temp_band_count; i++) { ++ margin_steps = max(min(temp_core_adj[i], 127), -128); ++ reg |= (margin_steps & CPR4_MARGIN_TEMP_CORE_ADJ_MASK) << ++ (i * CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT); ++ } ++ ++ cpr3_write(ctrl, addr, reg); ++ cpr3_debug(ctrl, "sdelta offset=0x%08x, val=0x%08x\n", addr, reg); ++} ++ ++/** ++ * cpr3_controller_program_sdelta() - programs hardware SDELTA registers with ++ * the voltage margin adjustments that need to be applied at ++ * different online core-count and temperature bands. Also, ++ * programs hardware register configuration for per-online-core ++ * and per-temperature based adjustments. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_controller_program_sdelta(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_corner *corner = &ctrl->aggr_corner; ++ struct cpr4_sdelta *sdelta = corner->sdelta; ++ int i, index, max_core_count, rc = 0; ++ bool cpr_enabled = ctrl->cpr_enabled; ++ ++ if (!sdelta) ++ /* cpr4_sdelta not defined for current aggregated corner */ ++ return 0; ++ ++ if (ctrl->supports_hw_closed_loop && ctrl->cpr_enabled) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ (ctrl->use_hw_closed_loop && !sdelta->allow_boost) ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE : 0); ++ } ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj ++ && !sdelta->allow_boost) { ++ /* ++ * Per-online-core, per-temperature and voltage boost ++ * adjustments are disabled for this aggregation corner. ++ */ ++ return 0; ++ } ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ max_core_count = sdelta->max_core_count; ++ ++ if (sdelta->allow_core_count_adj || sdelta->allow_temp_adj) { ++ if (sdelta->allow_core_count_adj) { ++ /* Program TEMP_CORE0 to same margins as TEMP_CORE1 */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE(0), ++ &sdelta->table[0]); ++ } ++ ++ for (i = 0; i < max_core_count; i++) { ++ index = i * sdelta->temp_band_count; ++ /* ++ * Program TEMP_COREi with voltage margin adjustments ++ * that need to be applied when the number of cores ++ * becomes i. ++ */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE( ++ sdelta->allow_core_count_adj ++ ? i + 1 : max_core_count), ++ &sdelta->table[index]); ++ } ++ } ++ ++ if (sdelta->allow_boost) { ++ /* Program only boost_num_cores row of SDELTA */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE(sdelta->boost_num_cores), ++ &sdelta->boost_table[0]); ++ } ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_boost) { ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK, ++ max_core_count ++ << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT); ++ } ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK ++ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_BOOST_EN, ++ max_core_count << CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT ++ | ((sdelta->allow_core_count_adj || sdelta->allow_boost) ++ ? CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN : 0) ++ | ((sdelta->allow_temp_adj && ctrl->supports_hw_closed_loop) ++ ? CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN : 0) ++ | (((ctrl->use_hw_closed_loop && !sdelta->allow_boost) ++ || !ctrl->supports_hw_closed_loop) ++ ? CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN : 0) ++ | (sdelta->allow_boost ++ ? CPR4_MARGIN_ADJ_CTL_BOOST_EN : 0)); ++ ++ /* ++ * Ensure that all previous CPR register writes have completed before ++ * continuing. ++ */ ++ mb(); ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_ctrl() - performs hardware initialization of CPR ++ * controller registers ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_ctrl(struct cpr3_controller *ctrl) ++{ ++ int i, j, k, m, rc; ++ u32 ro_used = 0; ++ u32 gcnt, cont_dly, up_down_dly, val; ++ u64 temp; ++ char *mode; ++ ++ if (ctrl->core_clk) { ++ rc = clk_set_rate(ctrl->core_clk, ctrl->cpr_clock_rate); ++ if (rc) { ++ cpr3_err(ctrl, "clk_set_rate(core_clk, %u) failed, rc=%d\n", ++ ctrl->cpr_clock_rate, rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ ++ /* Find all RO's used by any corner of any regulator. */ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ for (k = 0; k < ctrl->thread[i].vreg[j].corner_count; ++ k++) ++ for (m = 0; m < CPR3_RO_COUNT; m++) ++ if (ctrl->thread[i].vreg[j].corner[k]. ++ target_quot[m]) ++ ro_used |= BIT(m); ++ ++ /* Configure the GCNT of the RO's that will be used */ ++ gcnt = cpr3_regulator_get_gcnt(ctrl); ++ for (i = 0; i < CPR3_RO_COUNT; i++) ++ if (ro_used & BIT(i)) ++ cpr3_write(ctrl, CPR3_REG_GCNT(i), gcnt); ++ ++ /* Configure the loop delay time */ ++ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->loop_time; ++ do_div(temp, 1000000000); ++ cont_dly = temp; ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly); ++ else ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, cont_dly); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ temp = (u64)ctrl->cpr_clock_rate * ++ (u64)ctrl->up_down_delay_time; ++ do_div(temp, 1000000000); ++ up_down_dly = temp; ++ if (ctrl->supports_hw_closed_loop) ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, ++ up_down_dly); ++ cpr3_debug(ctrl, "up_down_dly=%u, up_down_delay_time=%u ns\n", ++ up_down_dly, ctrl->up_down_delay_time); ++ } ++ ++ cpr3_debug(ctrl, "cpr_clock_rate=%u HZ, sensor_time=%u ns, loop_time=%u ns, gcnt=%u, cont_dly=%u\n", ++ ctrl->cpr_clock_rate, ctrl->sensor_time, ctrl->loop_time, ++ gcnt, cont_dly); ++ ++ /* Configure CPR sensor operation */ ++ val = (ctrl->idle_clocks << CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT) ++ & CPR3_CPR_CTL_IDLE_CLOCKS_MASK; ++ val |= (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT) ++ & CPR3_CPR_CTL_COUNT_MODE_MASK; ++ val |= (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT) ++ & CPR3_CPR_CTL_COUNT_REPEAT_MASK; ++ cpr3_write(ctrl, CPR3_REG_CPR_CTL, val); ++ ++ cpr3_debug(ctrl, "idle_clocks=%u, count_mode=%u, count_repeat=%u; CPR_CTL=0x%08X\n", ++ ctrl->idle_clocks, ctrl->count_mode, ctrl->count_repeat, val); ++ ++ /* Configure CPR default step quotients */ ++ val = (ctrl->step_quot_init_min << CPR3_CPR_STEP_QUOT_MIN_SHIFT) ++ & CPR3_CPR_STEP_QUOT_MIN_MASK; ++ val |= (ctrl->step_quot_init_max << CPR3_CPR_STEP_QUOT_MAX_SHIFT) ++ & CPR3_CPR_STEP_QUOT_MAX_MASK; ++ cpr3_write(ctrl, CPR3_REG_CPR_STEP_QUOT, val); ++ ++ cpr3_debug(ctrl, "step_quot_min=%u, step_quot_max=%u; STEP_QUOT=0x%08X\n", ++ ctrl->step_quot_init_min, ctrl->step_quot_init_max, val); ++ ++ /* Configure the CPR sensor ownership */ ++ for (i = 0; i < ctrl->sensor_count; i++) ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(i), ++ ctrl->sensor_owner[i]); ++ ++ /* Configure per-thread registers */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ rc = cpr3_regulator_init_thread(&ctrl->thread[i]); ++ if (rc) { ++ cpr3_err(ctrl, "CPR thread register initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ ++ cpr3_debug(ctrl, "PD_THROTTLE=0x%08X\n", ++ ctrl->proc_clock_throttle); ++ } ++ ++ if ((ctrl->use_hw_closed_loop || ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) && ++ ctrl->vdd_limit_regulator) { ++ rc = regulator_enable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_regulator_init_cpr4(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR4-specific controller initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ /* Ensure that all register writes complete before disabling clocks. */ ++ wmb(); ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ ++ if (!ctrl->cpr_allowed_sw || !ctrl->cpr_allowed_hw) ++ mode = "open-loop"; ++ else if (ctrl->supports_hw_closed_loop) ++ mode = ctrl->use_hw_closed_loop ++ ? "HW closed-loop" : "SW closed-loop"; ++ else ++ mode = "closed-loop"; ++ ++ cpr3_info(ctrl, "Default CPR mode = %s", mode); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_set_target_quot() - configure the target quotient for each ++ * RO of the CPR3 thread and set the RO mask ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_set_target_quot(struct cpr3_thread *thread) ++{ ++ u32 new_quot, last_quot; ++ int i; ++ ++ if (thread->aggr_corner.ro_mask == CPR3_RO_MASK ++ && thread->last_closed_loop_aggr_corner.ro_mask == CPR3_RO_MASK) { ++ /* Avoid writing target quotients since all RO's are masked. */ ++ return; ++ } else if (thread->aggr_corner.ro_mask == CPR3_RO_MASK) { ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ CPR3_RO_MASK); ++ thread->last_closed_loop_aggr_corner.ro_mask = CPR3_RO_MASK; ++ /* ++ * Only the RO_MASK register needs to be written since all ++ * RO's are masked. ++ */ ++ return; ++ } else if (thread->aggr_corner.ro_mask ++ != thread->last_closed_loop_aggr_corner.ro_mask) { ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ thread->aggr_corner.ro_mask); ++ } ++ ++ for (i = 0; i < CPR3_RO_COUNT; i++) { ++ new_quot = thread->aggr_corner.target_quot[i]; ++ last_quot = thread->last_closed_loop_aggr_corner.target_quot[i]; ++ if (new_quot != last_quot) ++ cpr3_write(thread->ctrl, ++ CPR3_REG_TARGET_QUOT(thread->thread_id, i), ++ new_quot); ++ } ++ ++ thread->last_closed_loop_aggr_corner = thread->aggr_corner; ++ ++ return; ++} ++ ++/** ++ * cpr3_update_vreg_closed_loop_volt() - update the last known settled ++ * closed loop voltage for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @vdd_volt: Last known settled voltage in microvolts for the ++ * VDD supply ++ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register ++ * ++ * Return: none ++ */ ++static void cpr3_update_vreg_closed_loop_volt(struct cpr3_regulator *vreg, ++ int vdd_volt, u32 reg_last_measurement) ++{ ++ bool step_dn, step_up, aggr_step_up, aggr_step_dn, aggr_step_mid; ++ bool valid, pd_valid, saw_error; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ u32 id; ++ ++ if (vreg->last_closed_loop_corner == CPR3_REGULATOR_CORNER_INVALID) ++ return; ++ else ++ corner = &vreg->corner[vreg->last_closed_loop_corner]; ++ ++ if (vreg->thread->last_closed_loop_aggr_corner.ro_mask ++ == CPR3_RO_MASK || !vreg->aggregated) { ++ return; ++ } else if (!ctrl->cpr_enabled || !ctrl->last_corner_was_closed_loop) { ++ return; ++ } else if (ctrl->thread_count == 1 ++ && vdd_volt >= corner->floor_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, ++ corner->floor_volt); ++ return; ++ } else if (!ctrl->supports_hw_closed_loop) { ++ return; ++ } else if (ctrl->ctrl_type != CPR_CTRL_TYPE_CPR3) { ++ corner->last_volt = vdd_volt; ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, ++ corner->floor_volt); ++ return; ++ } ++ ++ /* CPR clocks are on and HW closed loop is supported */ ++ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID); ++ if (!valid) { ++ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X valid bit not set\n", ++ reg_last_measurement); ++ return; ++ } ++ ++ id = vreg->thread->thread_id; ++ ++ step_dn ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_DN(id)); ++ step_up ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_UP(id)); ++ aggr_step_dn = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_DN); ++ aggr_step_mid ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_MID); ++ aggr_step_up = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_UP); ++ saw_error = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_SAW_ERROR); ++ pd_valid ++ = !((((reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK) ++ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT) ++ & vreg->pd_bypass_mask) == vreg->pd_bypass_mask); ++ ++ if (!pd_valid) { ++ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X, all power domains bypassed\n", ++ reg_last_measurement); ++ return; ++ } else if (step_dn && step_up) { ++ cpr3_err(vreg, "both up and down status bits set, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ reg_last_measurement); ++ return; ++ } else if (aggr_step_dn && step_dn && vdd_volt < corner->last_volt ++ && vdd_volt >= corner->floor_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (aggr_step_up && step_up && vdd_volt > corner->last_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (aggr_step_mid ++ && vdd_volt >= corner->floor_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (saw_error && (vdd_volt == corner->ceiling_volt ++ || vdd_volt == corner->floor_volt)) { ++ corner->last_volt = vdd_volt; ++ } else { ++ cpr3_debug(vreg, "last_volt not updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, vdd_volt=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, corner->floor_volt, ++ vdd_volt, reg_last_measurement); ++ return; ++ } ++ ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, corner->ceiling_volt, ++ vreg->last_closed_loop_corner, corner->floor_volt, ++ reg_last_measurement); ++} ++ ++/** ++ * cpr3_regulator_mem_acc_bhs_used() - determines if mem-acc regulators powered ++ * through a BHS are associated with the CPR3 controller or any of ++ * the CPR3 regulators it controls. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function determines if the CPR3 controller or any of its CPR3 regulators ++ * need to manage mem-acc regulators that are currently powered through a BHS ++ * and whose corner selection is based upon a particular voltage threshold. ++ * ++ * Return: true or false ++ */ ++static bool cpr3_regulator_mem_acc_bhs_used(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j; ++ ++ if (!ctrl->mem_acc_threshold_volt) ++ return false; ++ ++ if (ctrl->mem_acc_regulator) ++ return true; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (vreg->mem_acc_regulator) ++ return true; ++ } ++ } ++ ++ return false; ++} ++ ++/** ++ * cpr3_regulator_config_bhs_mem_acc() - configure the mem-acc regulator ++ * settings for hardware blocks currently powered through the BHS. ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function programs the mem-acc regulator corners for CPR3 regulators ++ * whose LDO regulators are in bypassed state. The function also handles ++ * CPR3 controllers which utilize mem-acc regulators that operate independently ++ * from the LDO hardware and that must be programmed when the VDD supply ++ * crosses a particular voltage threshold. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_config_bhs_mem_acc(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j, rc, mem_acc_corn, safe_volt; ++ int mem_acc_volt = ctrl->mem_acc_threshold_volt; ++ int ref_volt; ++ ++ if (!cpr3_regulator_mem_acc_bhs_used(ctrl)) ++ return 0; ++ ++ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt : ++ new_volt; ++ ++ if (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) || ++ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt))) { ++ if (ref_volt < *last_volt) ++ safe_volt = max(mem_acc_volt, aggr_corner->last_volt); ++ else ++ safe_volt = max(mem_acc_volt, *last_volt); ++ ++ rc = regulator_set_voltage(ctrl->vdd_regulator, safe_volt, ++ new_volt < *last_volt ? ++ ctrl->aggr_corner.ceiling_volt : ++ new_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ safe_volt, rc); ++ return rc; ++ } ++ ++ *last_volt = safe_volt; ++ ++ mem_acc_corn = ref_volt < mem_acc_volt ? ++ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_LOW_CORNER] : ++ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_HIGH_CORNER]; ++ ++ if (ctrl->mem_acc_regulator) { ++ rc = regulator_set_voltage(ctrl->mem_acc_regulator, ++ mem_acc_corn, mem_acc_corn); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ mem_acc_corn, rc); ++ return rc; ++ } ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (!vreg->mem_acc_regulator) ++ continue; ++ ++ rc = regulator_set_voltage( ++ vreg->mem_acc_regulator, mem_acc_corn, ++ mem_acc_corn); ++ if (rc) { ++ cpr3_err(vreg, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ mem_acc_corn, rc); ++ return rc; ++ } ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_switch_apm_mode() - switch the mode of the APM controller ++ * associated with a given CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function requests a switch of the APM mode while guaranteeing ++ * any LDO regulator hardware requirements are satisfied. The function must ++ * be called once it is known a new VDD supply setpoint crosses the APM ++ * voltage threshold. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_switch_apm_mode(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct regulator *vdd = ctrl->vdd_regulator; ++ int apm_volt = ctrl->apm_threshold_volt; ++ int orig_last_volt = *last_volt; ++ int rc; ++ ++ rc = regulator_set_voltage(vdd, apm_volt, apm_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ apm_volt, rc); ++ return rc; ++ } ++ ++ *last_volt = apm_volt; ++ ++ rc = msm_apm_set_supply(ctrl->apm, new_volt >= apm_volt ++ ? ctrl->apm_high_supply : ctrl->apm_low_supply); ++ if (rc) { ++ cpr3_err(ctrl, "APM switch failed, rc=%d\n", rc); ++ /* Roll back the voltage. */ ++ regulator_set_voltage(vdd, orig_last_volt, INT_MAX); ++ *last_volt = orig_last_volt; ++ return rc; ++ } ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_config_voltage_crossings() - configure APM and mem-acc ++ * settings depending upon a new VDD supply setpoint ++ * ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function handles the APM and mem-acc regulator reconfiguration if ++ * the new VDD supply voltage will result in crossing their respective voltage ++ * thresholds. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_config_voltage_crossings(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ bool apm_crossing = false, mem_acc_crossing = false; ++ bool mem_acc_bhs_used; ++ int apm_volt = ctrl->apm_threshold_volt; ++ int mem_acc_volt = ctrl->mem_acc_threshold_volt; ++ int ref_volt, rc; ++ ++ if (ctrl->apm && apm_volt > 0 ++ && ((*last_volt < apm_volt && apm_volt <= new_volt) ++ || (*last_volt >= apm_volt && apm_volt > new_volt))) ++ apm_crossing = true; ++ ++ mem_acc_bhs_used = cpr3_regulator_mem_acc_bhs_used(ctrl); ++ ++ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt : ++ new_volt; ++ ++ if (mem_acc_bhs_used && ++ (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) || ++ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt)))) ++ mem_acc_crossing = true; ++ ++ if (apm_crossing && mem_acc_crossing) { ++ if ((new_volt < *last_volt && apm_volt >= mem_acc_volt) || ++ (new_volt >= *last_volt && apm_volt < mem_acc_volt)) { ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, ++ last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ } else { ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, ++ last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ } ++ } else if (apm_crossing) { ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ } else if (mem_acc_crossing) { ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_config_mem_acc() - configure the corner of the mem-acc ++ * regulator associated with the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_config_mem_acc(struct cpr3_controller *ctrl, ++ struct cpr3_corner *aggr_corner) ++{ ++ int rc; ++ ++ if (ctrl->mem_acc_regulator && aggr_corner->mem_acc_volt) { ++ rc = regulator_set_voltage(ctrl->mem_acc_regulator, ++ aggr_corner->mem_acc_volt, ++ aggr_corner->mem_acc_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ aggr_corner->mem_acc_volt, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_scale_vdd_voltage() - scale the CPR controlled VDD supply ++ * voltage to the new level while satisfying any other hardware ++ * requirements ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to end ++ * up at ++ * @last_volt: Last known voltage in microvolts for the VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function scales the CPR controlled VDD supply voltage from its ++ * current level to the new voltage that is specified. If the supply is ++ * configured to use the APM and the APM threshold is crossed as a result of ++ * the voltage scaling, then this function also stops at the APM threshold, ++ * switches the APM source, and finally sets the final new voltage. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_scale_vdd_voltage(struct cpr3_controller *ctrl, ++ int new_volt, int last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct regulator *vdd = ctrl->vdd_regulator; ++ int rc; ++ ++ if (new_volt < last_volt) { ++ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner); ++ if (rc) ++ return rc; ++ } else { ++ /* Increasing VDD voltage */ ++ if (ctrl->system_regulator) { ++ rc = regulator_set_voltage(ctrl->system_regulator, ++ aggr_corner->system_volt, INT_MAX); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n", ++ aggr_corner->system_volt, rc); ++ return rc; ++ } ++ } ++ } ++ ++ rc = cpr3_regulator_config_voltage_crossings(ctrl, new_volt, &last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to handle voltage threshold crossing configurations, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Subtract a small amount from the min_uV parameter so that the ++ * set voltage request is not dropped by the framework due to being ++ * duplicate. This is needed in order to switch from hardware ++ * closed-loop to open-loop successfully. ++ */ ++ rc = regulator_set_voltage(vdd, new_volt - (ctrl->cpr_enabled ? 0 : 1), ++ aggr_corner->ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ new_volt, rc); ++ return rc; ++ } ++ ++ if (new_volt == last_volt && ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ /* ++ * CPR4 features enforce voltage reprogramming when the last ++ * set voltage and new set voltage are same. This way, we can ++ * ensure that SAW PMIC STATUS register is updated with newly ++ * programmed voltage. ++ */ ++ rc = regulator_sync_voltage(vdd); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_sync_voltage(vdd) == %d failed, rc=%d\n", ++ new_volt, rc); ++ return rc; ++ } ++ } ++ ++ if (new_volt >= last_volt) { ++ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner); ++ if (rc) ++ return rc; ++ } else { ++ /* Decreasing VDD voltage */ ++ if (ctrl->system_regulator) { ++ rc = regulator_set_voltage(ctrl->system_regulator, ++ aggr_corner->system_volt, INT_MAX); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n", ++ aggr_corner->system_volt, rc); ++ return rc; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_get_dynamic_floor_volt() - returns the current dynamic floor ++ * voltage based upon static configurations and the state of all ++ * power domains during the last CPR measurement ++ * @ctrl: Pointer to the CPR3 controller ++ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register ++ * ++ * When using HW closed-loop, the dynamic floor voltage is always returned ++ * regardless of the current state of the power domains. ++ * ++ * Return: dynamic floor voltage in microvolts or 0 if dynamic floor is not ++ * currently required ++ */ ++static int cpr3_regulator_get_dynamic_floor_volt(struct cpr3_controller *ctrl, ++ u32 reg_last_measurement) ++{ ++ int dynamic_floor_volt = 0; ++ struct cpr3_regulator *vreg; ++ bool valid, pd_valid; ++ u32 bypass_bits; ++ int i, j; ++ ++ if (!ctrl->supports_hw_closed_loop) ++ return 0; ++ ++ if (likely(!ctrl->use_hw_closed_loop)) { ++ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID); ++ bypass_bits ++ = (reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK) ++ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT; ++ } else { ++ /* ++ * Ensure that the dynamic floor voltage is always used for ++ * HW closed-loop since the conditions below cannot be evaluated ++ * after each CPR measurement. ++ */ ++ valid = false; ++ bypass_bits = 0; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (!vreg->uses_dynamic_floor) ++ continue; ++ ++ pd_valid = !((bypass_bits & vreg->pd_bypass_mask) ++ == vreg->pd_bypass_mask); ++ ++ if (!valid || !pd_valid) ++ dynamic_floor_volt = max(dynamic_floor_volt, ++ vreg->corner[ ++ vreg->dynamic_floor_corner].last_volt); ++ } ++ } ++ ++ return dynamic_floor_volt; ++} ++ ++/** ++ * cpr3_regulator_max_sdelta_diff() - returns the maximum voltage difference in ++ * microvolts that can result from different operating conditions ++ * for the specified sdelta struct ++ * @sdelta: Pointer to the sdelta structure ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: voltage difference between the highest and lowest adjustments if ++ * sdelta and sdelta->table are valid, else 0. ++ */ ++static int cpr3_regulator_max_sdelta_diff(const struct cpr4_sdelta *sdelta, ++ int step_volt) ++{ ++ int i, j, index, sdelta_min = INT_MAX, sdelta_max = INT_MIN; ++ ++ if (!sdelta || !sdelta->table) ++ return 0; ++ ++ for (i = 0; i < sdelta->max_core_count; i++) { ++ for (j = 0; j < sdelta->temp_band_count; j++) { ++ index = i * sdelta->temp_band_count + j; ++ sdelta_min = min(sdelta_min, sdelta->table[index]); ++ sdelta_max = max(sdelta_max, sdelta->table[index]); ++ } ++ } ++ ++ return (sdelta_max - sdelta_min) * step_volt; ++} ++ ++/** ++ * cpr3_regulator_aggregate_sdelta() - check open-loop voltages of current ++ * aggregated corner and current corner of a given regulator ++ * and adjust the sdelta strucuture data of aggregate corner. ++ * @aggr_corner: Pointer to accumulated aggregated corner which ++ * is both an input and an output ++ * @corner: Pointer to the corner to be aggregated with ++ * aggr_corner ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_aggregate_sdelta( ++ struct cpr3_corner *aggr_corner, ++ const struct cpr3_corner *corner, int step_volt) ++{ ++ struct cpr4_sdelta *aggr_sdelta, *sdelta; ++ int aggr_core_count, core_count, temp_band_count; ++ u32 aggr_index, index; ++ int i, j, sdelta_size, cap_steps, adjust_sdelta; ++ ++ aggr_sdelta = aggr_corner->sdelta; ++ sdelta = corner->sdelta; ++ ++ if (aggr_corner->open_loop_volt < corner->open_loop_volt) { ++ /* ++ * Found the new dominant regulator as its open-loop requirement ++ * is higher than previous dominant regulator. Calculate cap ++ * voltage to limit the SDELTA values to make sure the runtime ++ * (Core-count/temp) adjustments do not violate other ++ * regulators' voltage requirements. Use cpr4_sdelta values of ++ * new dominant regulator. ++ */ ++ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt, ++ (corner->open_loop_volt - ++ aggr_corner->open_loop_volt)); ++ ++ /* Clear old data in the sdelta table */ ++ sdelta_size = aggr_sdelta->max_core_count ++ * aggr_sdelta->temp_band_count; ++ ++ if (aggr_sdelta->allow_core_count_adj ++ || aggr_sdelta->allow_temp_adj) ++ memset(aggr_sdelta->table, 0, sdelta_size ++ * sizeof(*aggr_sdelta->table)); ++ ++ if (sdelta->allow_temp_adj || sdelta->allow_core_count_adj) { ++ /* Copy new data in sdelta table */ ++ sdelta_size = sdelta->max_core_count ++ * sdelta->temp_band_count; ++ if (sdelta->table) ++ memcpy(aggr_sdelta->table, sdelta->table, ++ sdelta_size * sizeof(*sdelta->table)); ++ } ++ ++ if (sdelta->allow_boost) { ++ memcpy(aggr_sdelta->boost_table, sdelta->boost_table, ++ sdelta->temp_band_count ++ * sizeof(*sdelta->boost_table)); ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } else if (aggr_sdelta->allow_boost) { ++ for (i = 0; i < aggr_sdelta->temp_band_count; i++) { ++ adjust_sdelta = (corner->open_loop_volt ++ - aggr_corner->open_loop_volt) ++ / step_volt; ++ aggr_sdelta->boost_table[i] += adjust_sdelta; ++ aggr_sdelta->boost_table[i] ++ = min(aggr_sdelta->boost_table[i], 0); ++ } ++ } ++ ++ aggr_corner->open_loop_volt = corner->open_loop_volt; ++ aggr_sdelta->allow_temp_adj = sdelta->allow_temp_adj; ++ aggr_sdelta->allow_core_count_adj ++ = sdelta->allow_core_count_adj; ++ aggr_sdelta->max_core_count = sdelta->max_core_count; ++ aggr_sdelta->temp_band_count = sdelta->temp_band_count; ++ } else if (aggr_corner->open_loop_volt > corner->open_loop_volt) { ++ /* ++ * Adjust the cap voltage if the open-loop requirement of new ++ * regulator is the next highest. ++ */ ++ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt, ++ (aggr_corner->open_loop_volt ++ - corner->open_loop_volt)); ++ ++ if (sdelta->allow_boost) { ++ for (i = 0; i < aggr_sdelta->temp_band_count; i++) { ++ adjust_sdelta = (aggr_corner->open_loop_volt ++ - corner->open_loop_volt) ++ / step_volt; ++ aggr_sdelta->boost_table[i] = ++ sdelta->boost_table[i] + adjust_sdelta; ++ aggr_sdelta->boost_table[i] ++ = min(aggr_sdelta->boost_table[i], 0); ++ } ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } ++ } else { ++ /* ++ * Found another dominant regulator with same open-loop ++ * requirement. Make cap voltage to '0'. Disable core-count ++ * adjustments as we couldn't support for both regulators. ++ * Keep enable temp based adjustments if enabled for both ++ * regulators and choose mininum margin adjustment values ++ * between them. ++ */ ++ aggr_sdelta->cap_volt = 0; ++ aggr_sdelta->allow_core_count_adj = false; ++ ++ if (aggr_sdelta->allow_temp_adj ++ && sdelta->allow_temp_adj) { ++ aggr_core_count = aggr_sdelta->max_core_count - 1; ++ core_count = sdelta->max_core_count - 1; ++ temp_band_count = sdelta->temp_band_count; ++ for (j = 0; j < temp_band_count; j++) { ++ aggr_index = aggr_core_count * temp_band_count ++ + j; ++ index = core_count * temp_band_count + j; ++ aggr_sdelta->table[aggr_index] = ++ min(aggr_sdelta->table[aggr_index], ++ sdelta->table[index]); ++ } ++ } else { ++ aggr_sdelta->allow_temp_adj = false; ++ } ++ ++ if (sdelta->allow_boost) { ++ memcpy(aggr_sdelta->boost_table, sdelta->boost_table, ++ sdelta->temp_band_count ++ * sizeof(*sdelta->boost_table)); ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } ++ } ++ ++ /* Keep non-dominant clients boost enable state */ ++ aggr_sdelta->allow_boost |= sdelta->allow_boost; ++ if (aggr_sdelta->allow_boost) ++ aggr_sdelta->allow_core_count_adj = false; ++ ++ if (aggr_sdelta->cap_volt && !(aggr_sdelta->cap_volt == INT_MAX)) { ++ core_count = aggr_sdelta->max_core_count; ++ temp_band_count = aggr_sdelta->temp_band_count; ++ /* ++ * Convert cap voltage from uV to PMIC steps and use to limit ++ * sdelta margin adjustments. ++ */ ++ cap_steps = aggr_sdelta->cap_volt / step_volt; ++ for (i = 0; i < core_count; i++) ++ for (j = 0; j < temp_band_count; j++) { ++ index = i * temp_band_count + j; ++ aggr_sdelta->table[index] = ++ min(aggr_sdelta->table[index], ++ cap_steps); ++ } ++ } ++} ++ ++/** ++ * cpr3_regulator_aggregate_corners() - aggregate two corners together ++ * @aggr_corner: Pointer to accumulated aggregated corner which ++ * is both an input and an output ++ * @corner: Pointer to the corner to be aggregated with ++ * aggr_corner ++ * @aggr_quot: Flag indicating that target quotients should be ++ * aggregated as well. ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_aggregate_corners(struct cpr3_corner *aggr_corner, ++ const struct cpr3_corner *corner, bool aggr_quot, ++ int step_volt) ++{ ++ int i; ++ ++ aggr_corner->ceiling_volt ++ = max(aggr_corner->ceiling_volt, corner->ceiling_volt); ++ aggr_corner->floor_volt ++ = max(aggr_corner->floor_volt, corner->floor_volt); ++ aggr_corner->last_volt ++ = max(aggr_corner->last_volt, corner->last_volt); ++ aggr_corner->system_volt ++ = max(aggr_corner->system_volt, corner->system_volt); ++ aggr_corner->mem_acc_volt ++ = max(aggr_corner->mem_acc_volt, corner->mem_acc_volt); ++ aggr_corner->irq_en |= corner->irq_en; ++ aggr_corner->use_open_loop |= corner->use_open_loop; ++ ++ if (aggr_quot) { ++ aggr_corner->ro_mask &= corner->ro_mask; ++ ++ for (i = 0; i < CPR3_RO_COUNT; i++) ++ aggr_corner->target_quot[i] ++ = max(aggr_corner->target_quot[i], ++ corner->target_quot[i]); ++ } ++ ++ if (aggr_corner->sdelta && corner->sdelta ++ && (aggr_corner->sdelta->table ++ || aggr_corner->sdelta->boost_table)) { ++ cpr3_regulator_aggregate_sdelta(aggr_corner, corner, step_volt); ++ } else { ++ aggr_corner->open_loop_volt ++ = max(aggr_corner->open_loop_volt, ++ corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller ++ * to reflect the corners used by all CPR3 regulators as well as ++ * the CPR operating mode ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function aggregates the CPR parameters for all CPR3 regulators ++ * associated with the VDD supply. Upon success, it sets the aggregated last ++ * known good voltage. ++ * ++ * The VDD supply voltage will not be physically configured unless this ++ * condition is met by at least one of the regulators of the controller: ++ * regulator->vreg_enabled == true && ++ * regulator->current_corner != CPR3_REGULATOR_CORNER_INVALID ++ * ++ * CPR registers for the controller and each thread are updated as long as ++ * ctrl->cpr_enabled == true. ++ * ++ * Note, CPR3 controller lock must be held by the caller. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int _cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_corner aggr_corner = {}; ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ struct cpr4_sdelta *sdelta; ++ bool valid = false; ++ bool thread_valid; ++ int i, j, rc, new_volt, vdd_volt, dynamic_floor_volt, last_corner_volt; ++ u32 reg_last_measurement = 0, sdelta_size; ++ int *sdelta_table, *boost_table; ++ ++ last_corner_volt = 0; ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ vdd_volt = regulator_get_voltage(ctrl->vdd_regulator); ++ if (vdd_volt < 0) { ++ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n", ++ vdd_volt); ++ return vdd_volt; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ /* ++ * Save aggregated corner open-loop voltage which was programmed ++ * during last corner switch which is used when programming new ++ * aggregated corner open-loop voltage. ++ */ ++ last_corner_volt = ctrl->aggr_corner.open_loop_volt; ++ } ++ ++ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop && ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ reg_last_measurement ++ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT); ++ ++ aggr_corner.sdelta = ctrl->aggr_corner.sdelta; ++ if (aggr_corner.sdelta) { ++ sdelta = aggr_corner.sdelta; ++ sdelta_table = sdelta->table; ++ if (sdelta_table) { ++ sdelta_size = sdelta->max_core_count * ++ sdelta->temp_band_count; ++ memset(sdelta_table, 0, sdelta_size ++ * sizeof(*sdelta_table)); ++ } ++ ++ boost_table = sdelta->boost_table; ++ if (boost_table) ++ memset(boost_table, 0, sdelta->temp_band_count ++ * sizeof(*boost_table)); ++ ++ memset(sdelta, 0, sizeof(*sdelta)); ++ sdelta->table = sdelta_table; ++ sdelta->cap_volt = INT_MAX; ++ sdelta->boost_table = boost_table; ++ } ++ ++ /* Aggregate the requests of all threads */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ thread_valid = false; ++ ++ sdelta = thread->aggr_corner.sdelta; ++ if (sdelta) { ++ sdelta_table = sdelta->table; ++ if (sdelta_table) { ++ sdelta_size = sdelta->max_core_count * ++ sdelta->temp_band_count; ++ memset(sdelta_table, 0, sdelta_size ++ * sizeof(*sdelta_table)); ++ } ++ ++ boost_table = sdelta->boost_table; ++ if (boost_table) ++ memset(boost_table, 0, sdelta->temp_band_count ++ * sizeof(*boost_table)); ++ ++ memset(sdelta, 0, sizeof(*sdelta)); ++ sdelta->table = sdelta_table; ++ sdelta->cap_volt = INT_MAX; ++ sdelta->boost_table = boost_table; ++ } ++ ++ memset(&thread->aggr_corner, 0, sizeof(thread->aggr_corner)); ++ thread->aggr_corner.sdelta = sdelta; ++ thread->aggr_corner.ro_mask = CPR3_RO_MASK; ++ ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ ++ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop) ++ cpr3_update_vreg_closed_loop_volt(vreg, ++ vdd_volt, reg_last_measurement); ++ ++ if (!vreg->vreg_enabled ++ || vreg->current_corner ++ == CPR3_REGULATOR_CORNER_INVALID) { ++ /* Cannot participate in aggregation. */ ++ vreg->aggregated = false; ++ continue; ++ } else { ++ vreg->aggregated = true; ++ thread_valid = true; ++ } ++ ++ cpr3_regulator_aggregate_corners(&thread->aggr_corner, ++ &vreg->corner[vreg->current_corner], ++ true, ctrl->step_volt); ++ } ++ ++ valid |= thread_valid; ++ ++ if (thread_valid) ++ cpr3_regulator_aggregate_corners(&aggr_corner, ++ &thread->aggr_corner, ++ false, ctrl->step_volt); ++ } ++ ++ if (valid && ctrl->cpr_allowed_hw && ctrl->cpr_allowed_sw) { ++ rc = cpr3_closed_loop_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc); ++ return rc; ++ } ++ } else { ++ rc = cpr3_closed_loop_disable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ /* No threads are enabled with a valid corner so exit. */ ++ if (!valid) ++ return 0; ++ ++ /* ++ * When using CPR hardware closed-loop, the voltage may vary anywhere ++ * between the floor and ceiling voltage without software notification. ++ * Therefore, it is required that the floor to ceiling range for the ++ * aggregated corner not intersect the APM threshold voltage. Adjust ++ * the floor to ceiling range if this requirement is violated. ++ * ++ * The following algorithm is applied in the case that ++ * floor < threshold <= ceiling: ++ * if open_loop >= threshold - adj, then floor = threshold ++ * else ceiling = threshold - step ++ * where adj = an adjustment factor to ensure sufficient voltage margin ++ * and step = VDD output step size ++ * ++ * The open-loop and last known voltages are also bounded by the new ++ * floor or ceiling value as needed. ++ */ ++ if (ctrl->use_hw_closed_loop ++ && aggr_corner.ceiling_volt >= ctrl->apm_threshold_volt ++ && aggr_corner.floor_volt < ctrl->apm_threshold_volt) { ++ ++ if (aggr_corner.open_loop_volt ++ >= ctrl->apm_threshold_volt - ctrl->apm_adj_volt) ++ aggr_corner.floor_volt = ctrl->apm_threshold_volt; ++ else ++ aggr_corner.ceiling_volt ++ = ctrl->apm_threshold_volt - ctrl->step_volt; ++ ++ aggr_corner.last_volt ++ = max(aggr_corner.last_volt, aggr_corner.floor_volt); ++ aggr_corner.last_volt ++ = min(aggr_corner.last_volt, aggr_corner.ceiling_volt); ++ aggr_corner.open_loop_volt ++ = max(aggr_corner.open_loop_volt, aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt ++ = min(aggr_corner.open_loop_volt, aggr_corner.ceiling_volt); ++ } ++ ++ if (ctrl->use_hw_closed_loop ++ && aggr_corner.ceiling_volt >= ctrl->mem_acc_threshold_volt ++ && aggr_corner.floor_volt < ctrl->mem_acc_threshold_volt) { ++ aggr_corner.floor_volt = ctrl->mem_acc_threshold_volt; ++ aggr_corner.last_volt = max(aggr_corner.last_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt = max(aggr_corner.open_loop_volt, ++ aggr_corner.floor_volt); ++ } ++ ++ if (ctrl->use_hw_closed_loop) { ++ dynamic_floor_volt ++ = cpr3_regulator_get_dynamic_floor_volt(ctrl, ++ reg_last_measurement); ++ if (aggr_corner.floor_volt < dynamic_floor_volt) { ++ aggr_corner.floor_volt = dynamic_floor_volt; ++ aggr_corner.last_volt = max(aggr_corner.last_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt ++ = max(aggr_corner.open_loop_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.ceiling_volt = max(aggr_corner.ceiling_volt, ++ aggr_corner.floor_volt); ++ } ++ } ++ ++ if (ctrl->cpr_enabled && ctrl->last_corner_was_closed_loop) { ++ /* ++ * Always program open-loop voltage for CPR4 controllers which ++ * support hardware closed-loop. Storing the last closed loop ++ * voltage in corner structure can still help with debugging. ++ */ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ new_volt = aggr_corner.last_volt; ++ else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->supports_hw_closed_loop) ++ new_volt = aggr_corner.open_loop_volt; ++ else ++ new_volt = min(aggr_corner.last_volt + ++ cpr3_regulator_max_sdelta_diff(aggr_corner.sdelta, ++ ctrl->step_volt), ++ aggr_corner.ceiling_volt); ++ ++ aggr_corner.last_volt = new_volt; ++ } else { ++ new_volt = aggr_corner.open_loop_volt; ++ aggr_corner.last_volt = aggr_corner.open_loop_volt; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->supports_hw_closed_loop) { ++ /* ++ * Store last aggregated corner open-loop voltage in vdd_volt ++ * which is used when programming current aggregated corner ++ * required voltage. ++ */ ++ vdd_volt = last_corner_volt; ++ } ++ ++ cpr3_debug(ctrl, "setting new voltage=%d uV\n", new_volt); ++ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt, ++ vdd_volt, &aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "vdd voltage scaling failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ /* Only update registers if CPR is enabled. */ ++ if (ctrl->cpr_enabled) { ++ if (ctrl->use_hw_closed_loop) { ++ /* Hardware closed-loop */ ++ ++ /* Set ceiling and floor limits in hardware */ ++ rc = regulator_set_voltage(ctrl->vdd_limit_regulator, ++ aggr_corner.floor_volt, ++ aggr_corner.ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ /* Software closed-loop */ ++ ++ /* ++ * Disable UP or DOWN interrupts when at ceiling or ++ * floor respectively. ++ */ ++ if (new_volt == aggr_corner.floor_volt) ++ aggr_corner.irq_en &= ~CPR3_IRQ_DOWN; ++ if (new_volt == aggr_corner.ceiling_volt) ++ aggr_corner.irq_en &= ~CPR3_IRQ_UP; ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, aggr_corner.irq_en); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ cpr3_regulator_set_target_quot(&ctrl->thread[i]); ++ ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (vreg->vreg_enabled) ++ vreg->last_closed_loop_corner ++ = vreg->current_corner; ++ } ++ } ++ ++ if (ctrl->proc_clock_throttle) { ++ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt ++ && (ctrl->use_hw_closed_loop ++ || new_volt < aggr_corner.ceiling_volt)) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ ctrl->proc_clock_throttle); ++ else ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ } ++ ++ /* ++ * Ensure that all CPR register writes complete before ++ * re-enabling CPR loop operation. ++ */ ++ wmb(); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->vdd_limit_regulator) { ++ /* Set ceiling and floor limits in hardware */ ++ rc = regulator_set_voltage(ctrl->vdd_limit_regulator, ++ aggr_corner.floor_volt, ++ aggr_corner.ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ ctrl->aggr_corner = aggr_corner; ++ ++ if (ctrl->allow_core_count_adj || ctrl->allow_temp_adj ++ || ctrl->allow_boost) { ++ rc = cpr3_controller_program_sdelta(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to program sdelta, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ /* ++ * Only enable the CPR controller if it is possible to set more than ++ * one vdd-supply voltage. ++ */ ++ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt && ++ !aggr_corner.use_open_loop) ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ ctrl->last_corner_was_closed_loop = ctrl->cpr_enabled; ++ cpr3_debug(ctrl, "CPR configuration updated\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_wait_for_idle() - wait for the CPR controller to no longer be ++ * busy ++ * @ctrl: Pointer to the CPR3 controller ++ * @max_wait_ns: Max wait time in nanoseconds ++ * ++ * Return: 0 on success or -ETIMEDOUT if the controller was still busy after ++ * the maximum delay time ++ */ ++static int cpr3_regulator_wait_for_idle(struct cpr3_controller *ctrl, ++ s64 max_wait_ns) ++{ ++ ktime_t start, end; ++ s64 time_ns; ++ u32 reg; ++ ++ /* ++ * Ensure that all previous CPR register writes have completed before ++ * checking the status register. ++ */ ++ mb(); ++ ++ start = ktime_get(); ++ do { ++ end = ktime_get(); ++ time_ns = ktime_to_ns(ktime_sub(end, start)); ++ if (time_ns > max_wait_ns) { ++ cpr3_err(ctrl, "CPR controller still busy after %lld us\n", ++ div_s64(time_ns, 1000)); ++ return -ETIMEDOUT; ++ } ++ usleep_range(50, 100); ++ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ } while (reg & CPR3_CPR_STATUS_BUSY_MASK); ++ ++ return 0; ++} ++ ++/** ++ * cmp_int() - int comparison function to be passed into the sort() function ++ * which leads to ascending sorting ++ * @a: First int value ++ * @b: Second int value ++ * ++ * Return: >0 if a > b, 0 if a == b, <0 if a < b ++ */ ++static int cmp_int(const void *a, const void *b) ++{ ++ return *(int *)a - *(int *)b; ++} ++ ++/** ++ * cpr3_regulator_measure_aging() - measure the quotient difference for the ++ * specified CPR aging sensor ++ * @ctrl: Pointer to the CPR3 controller ++ * @aging_sensor: Aging sensor to measure ++ * ++ * Note that vdd-supply must be configured to the aging reference voltage before ++ * calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_measure_aging(struct cpr3_controller *ctrl, ++ struct cpr3_aging_sensor_info *aging_sensor) ++{ ++ u32 mask, reg, result, quot_min, quot_max, sel_min, sel_max; ++ u32 quot_min_scaled, quot_max_scaled; ++ u32 gcnt, gcnt_ref, gcnt0_restore, gcnt1_restore, irq_restore; ++ u32 ro_mask_restore, cont_dly_restore, up_down_dly_restore = 0; ++ int quot_delta, quot_delta_scaled, quot_delta_scaled_sum; ++ int *quot_delta_results; ++ int rc, rc2, i, aging_measurement_count, filtered_count; ++ bool is_aging_measurement; ++ ++ quot_delta_results = kcalloc(CPR3_AGING_MEASUREMENT_ITERATIONS, ++ sizeof(*quot_delta_results), GFP_KERNEL); ++ if (!quot_delta_results) ++ return -ENOMEM; ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ kfree(quot_delta_results); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ /* Enable up, down, and mid CPR interrupts */ ++ irq_restore = cpr3_read(ctrl, CPR3_REG_IRQ_EN); ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID); ++ ++ /* Ensure that the aging sensor is assigned to CPR thread 0 */ ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id), 0); ++ ++ /* Switch from HW to SW closed-loop if necessary */ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ } ++ ++ /* Configure the GCNT for RO0 and RO1 that are used for aging */ ++ gcnt0_restore = cpr3_read(ctrl, CPR3_REG_GCNT(0)); ++ gcnt1_restore = cpr3_read(ctrl, CPR3_REG_GCNT(1)); ++ gcnt_ref = cpr3_regulator_get_gcnt(ctrl); ++ gcnt = gcnt_ref * 3 / 2; ++ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt); ++ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt); ++ ++ /* Unmask all RO's */ ++ ro_mask_restore = cpr3_read(ctrl, CPR3_REG_RO_MASK(0)); ++ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), 0); ++ ++ /* ++ * Mask all sensors except for the one to measure and bypass all ++ * sensors in collapsible domains. ++ */ ++ for (i = 0; i <= ctrl->sensor_count / 32; i++) { ++ mask = GENMASK(min(31, ctrl->sensor_count - i * 32), 0); ++ if (aging_sensor->sensor_id / 32 >= i ++ && aging_sensor->sensor_id / 32 < (i + 1)) ++ mask &= ~BIT(aging_sensor->sensor_id % 32); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), mask); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i), ++ aging_sensor->bypass_mask[i]); ++ } ++ ++ /* Set CPR loop delays to 0 us */ ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cont_dly_restore = cpr3_read(ctrl, CPR3_REG_CPR_TIMER_MID_CONT); ++ up_down_dly_restore = cpr3_read(ctrl, ++ CPR3_REG_CPR_TIMER_UP_DN_CONT); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, 0); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, 0); ++ } else { ++ cont_dly_restore = cpr3_read(ctrl, ++ CPR3_REG_CPR_TIMER_AUTO_CONT); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, 0); ++ } ++ ++ /* Set count mode to all-at-once min with no repeat */ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK, ++ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN ++ << CPR3_CPR_CTL_COUNT_MODE_SHIFT); ++ ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ rc = cpr3_regulator_wait_for_idle(ctrl, ++ CPR3_AGING_MEASUREMENT_TIMEOUT_NS); ++ if (rc) ++ goto cleanup; ++ ++ /* Set count mode to all-at-once aging */ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, CPR3_CPR_CTL_COUNT_MODE_MASK, ++ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE ++ << CPR3_CPR_CTL_COUNT_MODE_SHIFT); ++ ++ aging_measurement_count = 0; ++ for (i = 0; i < CPR3_AGING_MEASUREMENT_ITERATIONS; i++) { ++ /* Send CONT_NACK */ ++ cpr3_write(ctrl, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK); ++ ++ rc = cpr3_regulator_wait_for_idle(ctrl, ++ CPR3_AGING_MEASUREMENT_TIMEOUT_NS); ++ if (rc) ++ goto cleanup; ++ ++ /* Check for PAGE_IS_AGE flag in status register */ ++ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ is_aging_measurement ++ = reg & CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK; ++ ++ /* Read CPR measurement results */ ++ result = cpr3_read(ctrl, CPR3_REG_RESULT1(0)); ++ quot_min = (result & CPR3_RESULT1_QUOT_MIN_MASK) ++ >> CPR3_RESULT1_QUOT_MIN_SHIFT; ++ quot_max = (result & CPR3_RESULT1_QUOT_MAX_MASK) ++ >> CPR3_RESULT1_QUOT_MAX_SHIFT; ++ sel_min = (result & CPR3_RESULT1_RO_MIN_MASK) ++ >> CPR3_RESULT1_RO_MIN_SHIFT; ++ sel_max = (result & CPR3_RESULT1_RO_MAX_MASK) ++ >> CPR3_RESULT1_RO_MAX_SHIFT; ++ ++ /* ++ * Scale the quotients so that they are equivalent to the fused ++ * values. This accounts for the difference in measurement ++ * interval times. ++ */ ++ quot_min_scaled = quot_min * (gcnt_ref + 1) / (gcnt + 1); ++ quot_max_scaled = quot_max * (gcnt_ref + 1) / (gcnt + 1); ++ ++ if (sel_max == 1) { ++ quot_delta = quot_max - quot_min; ++ quot_delta_scaled = quot_max_scaled - quot_min_scaled; ++ } else { ++ quot_delta = quot_min - quot_max; ++ quot_delta_scaled = quot_min_scaled - quot_max_scaled; ++ } ++ ++ if (is_aging_measurement) ++ quot_delta_results[aging_measurement_count++] ++ = quot_delta_scaled; ++ ++ cpr3_debug(ctrl, "aging results: page_is_age=%u, sel_min=%u, sel_max=%u, quot_min=%u, quot_max=%u, quot_delta=%d, quot_min_scaled=%u, quot_max_scaled=%u, quot_delta_scaled=%d\n", ++ is_aging_measurement, sel_min, sel_max, quot_min, ++ quot_max, quot_delta, quot_min_scaled, quot_max_scaled, ++ quot_delta_scaled); ++ } ++ ++ filtered_count ++ = aging_measurement_count - CPR3_AGING_MEASUREMENT_FILTER * 2; ++ if (filtered_count > 0) { ++ sort(quot_delta_results, aging_measurement_count, ++ sizeof(*quot_delta_results), cmp_int, NULL); ++ ++ quot_delta_scaled_sum = 0; ++ for (i = 0; i < filtered_count; i++) ++ quot_delta_scaled_sum ++ += quot_delta_results[i ++ + CPR3_AGING_MEASUREMENT_FILTER]; ++ ++ aging_sensor->measured_quot_diff ++ = quot_delta_scaled_sum / filtered_count; ++ cpr3_info(ctrl, "average quotient delta=%d (count=%d)\n", ++ aging_sensor->measured_quot_diff, ++ filtered_count); ++ } else { ++ cpr3_err(ctrl, "%d aging measurements completed after %d iterations\n", ++ aging_measurement_count, ++ CPR3_AGING_MEASUREMENT_ITERATIONS); ++ rc = -EBUSY; ++ } ++ ++cleanup: ++ kfree(quot_delta_results); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc2 = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc2) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc2); ++ rc = rc2; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_restore); ++ ++ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), ro_mask_restore); ++ ++ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt0_restore); ++ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt1_restore); ++ ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly_restore); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, ++ up_down_dly_restore); ++ } else { ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, ++ cont_dly_restore); ++ } ++ ++ for (i = 0; i <= ctrl->sensor_count / 32; i++) { ++ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), 0); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i), 0); ++ } ++ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK, ++ (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT) ++ | (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT)); ++ ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id), ++ ctrl->sensor_owner[aging_sensor->sensor_id]); ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID); ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_readjust_volt_and_quot() - readjust the target quotients as ++ * well as the floor, ceiling, and open-loop voltages for the ++ * regulator by removing the old adjustment and adding the new one ++ * @vreg: Pointer to the CPR3 regulator ++ * @old_adjust_volt: Old aging adjustment voltage in microvolts ++ * @new_adjust_volt: New aging adjustment voltage in microvolts ++ * ++ * Also reset the cached closed loop voltage (last_volt) to equal the open-loop ++ * voltage for each corner. ++ * ++ * Return: None ++ */ ++static void cpr3_regulator_readjust_volt_and_quot(struct cpr3_regulator *vreg, ++ int old_adjust_volt, int new_adjust_volt) ++{ ++ unsigned long long temp; ++ int i, j, old_volt, new_volt, rounded_volt; ++ ++ if (!vreg->aging_allowed) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ temp = (unsigned long long)old_adjust_volt ++ * (unsigned long long)vreg->corner[i].aging_derate; ++ do_div(temp, 1000); ++ old_volt = temp; ++ ++ temp = (unsigned long long)new_adjust_volt ++ * (unsigned long long)vreg->corner[i].aging_derate; ++ do_div(temp, 1000); ++ new_volt = temp; ++ ++ old_volt = min(vreg->aging_max_adjust_volt, old_volt); ++ new_volt = min(vreg->aging_max_adjust_volt, new_volt); ++ ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] != 0) { ++ vreg->corner[i].target_quot[j] ++ += cpr3_quot_adjustment( ++ vreg->corner[i].ro_scale[j], ++ new_volt) ++ - cpr3_quot_adjustment( ++ vreg->corner[i].ro_scale[j], ++ old_volt); ++ } ++ } ++ ++ rounded_volt = CPR3_ROUND(new_volt, ++ vreg->thread->ctrl->step_volt); ++ ++ if (!vreg->aging_allow_open_loop_adj) ++ rounded_volt = 0; ++ ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].unaged_ceiling_volt + rounded_volt; ++ vreg->corner[i].ceiling_volt = min(vreg->corner[i].ceiling_volt, ++ vreg->corner[i].abs_ceiling_volt); ++ vreg->corner[i].floor_volt ++ = vreg->corner[i].unaged_floor_volt + rounded_volt; ++ vreg->corner[i].floor_volt = min(vreg->corner[i].floor_volt, ++ vreg->corner[i].ceiling_volt); ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].unaged_open_loop_volt + rounded_volt; ++ vreg->corner[i].open_loop_volt ++ = min(vreg->corner[i].open_loop_volt, ++ vreg->corner[i].ceiling_volt); ++ ++ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt; ++ ++ cpr3_debug(vreg, "corner %d: applying %d uV closed-loop and %d uV open-loop voltage margin adjustment\n", ++ i, new_volt, rounded_volt); ++ } ++} ++ ++/** ++ * cpr3_regulator_set_aging_ref_adjustment() - adjust target quotients for the ++ * regulators managed by this CPR controller to account for aging ++ * @ctrl: Pointer to the CPR3 controller ++ * @ref_adjust_volt: New aging reference adjustment voltage in microvolts to ++ * apply to all regulators managed by this CPR controller ++ * ++ * The existing aging adjustment as defined by ctrl->aging_ref_adjust_volt is ++ * first removed and then the adjustment is applied. Lastly, the value of ++ * ctrl->aging_ref_adjust_volt is updated to ref_adjust_volt. ++ */ ++static void cpr3_regulator_set_aging_ref_adjustment( ++ struct cpr3_controller *ctrl, int ref_adjust_volt) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ cpr3_regulator_readjust_volt_and_quot(vreg, ++ ctrl->aging_ref_adjust_volt, ref_adjust_volt); ++ } ++ } ++ ++ ctrl->aging_ref_adjust_volt = ref_adjust_volt; ++} ++ ++/** ++ * cpr3_regulator_aging_adjust() - adjust the target quotients for regulators ++ * based on the output of CPR aging sensors ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_aging_adjust(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_regulator *vreg; ++ struct cpr3_corner restore_aging_corner; ++ struct cpr3_corner *corner; ++ int *restore_current_corner; ++ bool *restore_vreg_enabled; ++ int i, j, id, rc, rc2, vreg_count, aging_volt, max_aging_volt = 0; ++ u32 reg; ++ ++ if (!ctrl->aging_required || !ctrl->cpr_enabled ++ || ctrl->aggr_corner.ceiling_volt == 0 ++ || ctrl->aggr_corner.ceiling_volt > ctrl->aging_ref_volt) ++ return 0; ++ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg_count++; ++ ++ if (vreg->aging_allowed && vreg->vreg_enabled ++ && vreg->current_corner > vreg->aging_corner) ++ return 0; ++ } ++ } ++ ++ /* Verify that none of the aging sensors are currently masked. */ ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ id = ctrl->aging_sensor[i].sensor_id; ++ reg = cpr3_read(ctrl, CPR3_REG_SENSOR_MASK_READ(id)); ++ if (reg & BIT(id % 32)) ++ return 0; ++ } ++ ++ /* ++ * Verify that the aging possible register (if specified) has an ++ * acceptable value. ++ */ ++ if (ctrl->aging_possible_reg) { ++ reg = readl_relaxed(ctrl->aging_possible_reg); ++ reg &= ctrl->aging_possible_mask; ++ if (reg != ctrl->aging_possible_val) ++ return 0; ++ } ++ ++ restore_current_corner = kcalloc(vreg_count, ++ sizeof(*restore_current_corner), GFP_KERNEL); ++ restore_vreg_enabled = kcalloc(vreg_count, ++ sizeof(*restore_vreg_enabled), GFP_KERNEL); ++ if (!restore_current_corner || !restore_vreg_enabled) { ++ kfree(restore_current_corner); ++ kfree(restore_vreg_enabled); ++ return -ENOMEM; ++ } ++ ++ /* Force all regulators to the aging corner */ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ restore_current_corner[vreg_count] ++ = vreg->current_corner; ++ restore_vreg_enabled[vreg_count] ++ = vreg->vreg_enabled; ++ ++ vreg->current_corner = vreg->aging_corner; ++ vreg->vreg_enabled = true; ++ } ++ } ++ ++ /* Force one of the regulators to require the aging reference voltage */ ++ vreg = &ctrl->thread[0].vreg[0]; ++ corner = &vreg->corner[vreg->current_corner]; ++ restore_aging_corner = *corner; ++ corner->ceiling_volt = ctrl->aging_ref_volt; ++ corner->floor_volt = ctrl->aging_ref_volt; ++ corner->open_loop_volt = ctrl->aging_ref_volt; ++ corner->last_volt = ctrl->aging_ref_volt; ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ /* Set the vdd supply voltage to the aging reference voltage */ ++ rc = _cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to force vdd-supply to the aging reference voltage=%d uV, rc=%d\n", ++ ctrl->aging_ref_volt, rc); ++ goto cleanup; ++ } ++ ++ if (ctrl->aging_vdd_mode) { ++ rc = regulator_set_mode(ctrl->vdd_regulator, ++ ctrl->aging_vdd_mode); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n", ++ ctrl->aging_vdd_mode, rc); ++ goto cleanup; ++ } ++ } ++ ++ /* Perform aging measurement on all aging sensors */ ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ for (j = 0; j < CPR3_AGING_RETRY_COUNT; j++) { ++ rc = cpr3_regulator_measure_aging(ctrl, ++ &ctrl->aging_sensor[i]); ++ if (!rc) ++ break; ++ } ++ ++ if (!rc) { ++ aging_volt = ++ cpr3_voltage_adjustment( ++ ctrl->aging_sensor[i].ro_scale, ++ ctrl->aging_sensor[i].measured_quot_diff ++ - ctrl->aging_sensor[i].init_quot_diff); ++ max_aging_volt = max(max_aging_volt, aging_volt); ++ } else { ++ cpr3_err(ctrl, "CPR aging measurement failed after %d tries, rc=%d\n", ++ j, rc); ++ ctrl->aging_failed = true; ++ ctrl->aging_required = false; ++ goto cleanup; ++ } ++ } ++ ++cleanup: ++ vreg = &ctrl->thread[0].vreg[0]; ++ vreg->corner[vreg->current_corner] = restore_aging_corner; ++ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg->current_corner ++ = restore_current_corner[vreg_count]; ++ vreg->vreg_enabled = restore_vreg_enabled[vreg_count]; ++ } ++ } ++ ++ kfree(restore_current_corner); ++ kfree(restore_vreg_enabled); ++ ++ /* Adjust the CPR target quotients according to the aging measurement */ ++ if (!rc) { ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, max_aging_volt); ++ ++ cpr3_info(ctrl, "aging measurement successful; aging reference adjustment voltage=%d uV\n", ++ ctrl->aging_ref_adjust_volt); ++ ctrl->aging_succeeded = true; ++ ctrl->aging_required = false; ++ } ++ ++ if (ctrl->aging_complete_vdd_mode) { ++ rc = regulator_set_mode(ctrl->vdd_regulator, ++ ctrl->aging_complete_vdd_mode); ++ if (rc) ++ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n", ++ ctrl->aging_complete_vdd_mode, rc); ++ } ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ /* ++ * Restore vdd-supply to the voltage before the aging measurement and ++ * restore the CPR3 controller hardware state. ++ */ ++ rc2 = _cpr3_regulator_update_ctrl_state(ctrl); ++ ++ /* Stop last_volt caching on for the next request */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ return rc ? rc : rc2; ++} ++ ++/** ++ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller ++ * to reflect the corners used by all CPR3 regulators as well as ++ * the CPR operating mode and perform aging adjustments if needed ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Note, CPR3 controller lock must be held by the caller. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = _cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) ++ return rc; ++ ++ return cpr3_regulator_aging_adjust(ctrl); ++} ++ ++/** ++ * cpr3_regulator_set_voltage() - set the voltage corner for the CPR3 regulator ++ * associated with the regulator device ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @corner: New voltage corner to set (offset by CPR3_CORNER_OFFSET) ++ * @corner_max: Maximum voltage corner allowed (offset by ++ * CPR3_CORNER_OFFSET) ++ * @selector: Pointer which is filled with the selector value for the ++ * corner ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. The VDD voltage will not be ++ * physically configured until both this function and cpr3_regulator_enable() ++ * are called. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_set_voltage(struct regulator_dev *rdev, ++ int corner, int corner_max, unsigned *selector) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc = 0; ++ int last_corner; ++ ++ corner -= CPR3_CORNER_OFFSET; ++ corner_max -= CPR3_CORNER_OFFSET; ++ *selector = corner; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!vreg->vreg_enabled) { ++ vreg->current_corner = corner; ++ cpr3_debug(vreg, "stored corner=%d\n", corner); ++ goto done; ++ } else if (vreg->current_corner == corner) { ++ goto done; ++ } ++ ++ last_corner = vreg->current_corner; ++ vreg->current_corner = corner; ++ ++ if (vreg->cpr4_regulator_data != NULL) ++ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL) ++ vreg->cpr4_regulator_data->mem_acc_funcs->set_mem_acc(rdev); ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ vreg->current_corner = last_corner; ++ } ++ ++ if (vreg->cpr4_regulator_data != NULL) ++ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL) ++ vreg->cpr4_regulator_data->mem_acc_funcs->clear_mem_acc(rdev); ++ ++ cpr3_debug(vreg, "set corner=%d\n", corner); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_handle_temp_open_loop_adjustment() - voltage based cold temperature ++ * ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @is_cold: Flag to denote enter/exit cold condition ++ * ++ * This function is adjusts voltage margin based on cold condition ++ * ++ * Return: 0 = success ++ */ ++ ++int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold) ++{ ++ int i ,j, k, rc; ++ struct cpr3_regulator *vreg; ++ ++ mutex_lock(&ctrl->lock); ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ for (k = 0; k < vreg->corner_count; k++) { ++ vreg->corner[k].open_loop_volt = is_cold ? ++ vreg->corner[k].cold_temp_open_loop_volt : ++ vreg->corner[k].normal_temp_open_loop_volt; ++ } ++ } ++ } ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_get_voltage() - get the voltage corner for the CPR3 regulator ++ * associated with the regulator device ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: voltage corner value offset by CPR3_CORNER_OFFSET ++ */ ++static int cpr3_regulator_get_voltage(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if (vreg->current_corner == CPR3_REGULATOR_CORNER_INVALID) ++ return CPR3_CORNER_OFFSET; ++ else ++ return vreg->current_corner + CPR3_CORNER_OFFSET; ++} ++ ++/** ++ * cpr3_regulator_list_voltage() - return the voltage corner mapped to the ++ * specified selector ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @selector: Regulator selector ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: voltage corner value offset by CPR3_CORNER_OFFSET ++ */ ++static int cpr3_regulator_list_voltage(struct regulator_dev *rdev, ++ unsigned selector) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if (selector < vreg->corner_count) ++ return selector + CPR3_CORNER_OFFSET; ++ else ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_is_enabled() - return the enable state of the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: true if regulator is enabled, false if regulator is disabled ++ */ ++static int cpr3_regulator_is_enabled(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ return vreg->vreg_enabled; ++} ++ ++/** ++ * cpr3_regulator_enable() - enable the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_enable(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc = 0; ++ ++ if (vreg->vreg_enabled == true) ++ return 0; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->system_regulator) { ++ rc = regulator_enable(ctrl->system_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_enable(system) failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ rc = regulator_enable(ctrl->vdd_regulator); ++ if (rc) { ++ cpr3_err(vreg, "regulator_enable(vdd) failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ vreg->vreg_enabled = true; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ regulator_disable(ctrl->vdd_regulator); ++ vreg->vreg_enabled = false; ++ goto done; ++ } ++ ++ cpr3_debug(vreg, "Enabled\n"); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_disable() - disable the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_disable(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc, rc2; ++ ++ if (vreg->vreg_enabled == false) ++ return 0; ++ ++ mutex_lock(&ctrl->lock); ++ rc = regulator_disable(ctrl->vdd_regulator); ++ if (rc) { ++ cpr3_err(vreg, "regulator_disable(vdd) failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ vreg->vreg_enabled = false; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ rc2 = regulator_enable(ctrl->vdd_regulator); ++ vreg->vreg_enabled = true; ++ goto done; ++ } ++ ++ if (ctrl->system_regulator) { ++ rc = regulator_disable(ctrl->system_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_disable(system) failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_debug(vreg, "Disabled\n"); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++static struct regulator_ops cpr3_regulator_ops = { ++ .enable = cpr3_regulator_enable, ++ .disable = cpr3_regulator_disable, ++ .is_enabled = cpr3_regulator_is_enabled, ++ .set_voltage = cpr3_regulator_set_voltage, ++ .get_voltage = cpr3_regulator_get_voltage, ++ .list_voltage = cpr3_regulator_list_voltage, ++}; ++ ++/** ++ * cpr3_print_result() - print CPR measurement results to the kernel log for ++ * debugging purposes ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: None ++ */ ++static void cpr3_print_result(struct cpr3_thread *thread) ++{ ++ struct cpr3_controller *ctrl = thread->ctrl; ++ u32 result[3], busy, step_dn, step_up, error_steps, error, negative; ++ u32 quot_min, quot_max, ro_min, ro_max, step_quot_min, step_quot_max; ++ u32 sensor_min, sensor_max; ++ char *sign; ++ ++ result[0] = cpr3_read(ctrl, CPR3_REG_RESULT0(thread->thread_id)); ++ result[1] = cpr3_read(ctrl, CPR3_REG_RESULT1(thread->thread_id)); ++ result[2] = cpr3_read(ctrl, CPR3_REG_RESULT2(thread->thread_id)); ++ ++ busy = !!(result[0] & CPR3_RESULT0_BUSY_MASK); ++ step_dn = !!(result[0] & CPR3_RESULT0_STEP_DN_MASK); ++ step_up = !!(result[0] & CPR3_RESULT0_STEP_UP_MASK); ++ error_steps = (result[0] & CPR3_RESULT0_ERROR_STEPS_MASK) ++ >> CPR3_RESULT0_ERROR_STEPS_SHIFT; ++ error = (result[0] & CPR3_RESULT0_ERROR_MASK) ++ >> CPR3_RESULT0_ERROR_SHIFT; ++ negative = !!(result[0] & CPR3_RESULT0_NEGATIVE_MASK); ++ ++ quot_min = (result[1] & CPR3_RESULT1_QUOT_MIN_MASK) ++ >> CPR3_RESULT1_QUOT_MIN_SHIFT; ++ quot_max = (result[1] & CPR3_RESULT1_QUOT_MAX_MASK) ++ >> CPR3_RESULT1_QUOT_MAX_SHIFT; ++ ro_min = (result[1] & CPR3_RESULT1_RO_MIN_MASK) ++ >> CPR3_RESULT1_RO_MIN_SHIFT; ++ ro_max = (result[1] & CPR3_RESULT1_RO_MAX_MASK) ++ >> CPR3_RESULT1_RO_MAX_SHIFT; ++ ++ step_quot_min = (result[2] & CPR3_RESULT2_STEP_QUOT_MIN_MASK) ++ >> CPR3_RESULT2_STEP_QUOT_MIN_SHIFT; ++ step_quot_max = (result[2] & CPR3_RESULT2_STEP_QUOT_MAX_MASK) ++ >> CPR3_RESULT2_STEP_QUOT_MAX_SHIFT; ++ sensor_min = (result[2] & CPR3_RESULT2_SENSOR_MIN_MASK) ++ >> CPR3_RESULT2_SENSOR_MIN_SHIFT; ++ sensor_max = (result[2] & CPR3_RESULT2_SENSOR_MAX_MASK) ++ >> CPR3_RESULT2_SENSOR_MAX_SHIFT; ++ ++ sign = negative ? "-" : ""; ++ cpr3_debug(ctrl, "thread %u: busy=%u, step_dn=%u, step_up=%u, error_steps=%s%u, error=%s%u\n", ++ thread->thread_id, busy, step_dn, step_up, sign, error_steps, ++ sign, error); ++ cpr3_debug(ctrl, "thread %u: quot_min=%u, quot_max=%u, ro_min=%u, ro_max=%u\n", ++ thread->thread_id, quot_min, quot_max, ro_min, ro_max); ++ cpr3_debug(ctrl, "thread %u: step_quot_min=%u, step_quot_max=%u, sensor_min=%u, sensor_max=%u\n", ++ thread->thread_id, step_quot_min, step_quot_max, sensor_min, ++ sensor_max); ++} ++ ++/** ++ * cpr3_thread_busy() - returns if the specified CPR3 thread is busy taking ++ * a measurement ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: CPR3 busy status ++ */ ++static bool cpr3_thread_busy(struct cpr3_thread *thread) ++{ ++ u32 result; ++ ++ result = cpr3_read(thread->ctrl, CPR3_REG_RESULT0(thread->thread_id)); ++ ++ return !!(result & CPR3_RESULT0_BUSY_MASK); ++} ++ ++/** ++ * cpr3_irq_handler() - CPR interrupt handler callback function used for ++ * software closed-loop operation ++ * @irq: CPR interrupt number ++ * @data: Private data corresponding to the CPR3 controller ++ * pointer ++ * ++ * This function increases or decreases the vdd supply voltage based upon the ++ * CPR controller recommendation. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t cpr3_irq_handler(int irq, void *data) ++{ ++ struct cpr3_controller *ctrl = data; ++ struct cpr3_corner *aggr = &ctrl->aggr_corner; ++ u32 cont = CPR3_CONT_CMD_NACK; ++ u32 reg_last_measurement = 0; ++ struct cpr3_regulator *vreg; ++ struct cpr3_corner *corner; ++ unsigned long flags; ++ int i, j, new_volt, last_volt, dynamic_floor_volt, rc; ++ u32 irq_en, status, cpr_status, ctl; ++ bool up, down; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_debug(ctrl, "CPR interrupt received but CPR is disabled\n"); ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++ } else if (ctrl->use_hw_closed_loop) { ++ cpr3_debug(ctrl, "CPR interrupt received but CPR is using HW closed-loop\n"); ++ goto done; ++ } ++ ++ /* ++ * CPR IRQ status checking and CPR controller disabling must happen ++ * atomically and without invening delay in order to avoid an interrupt ++ * storm caused by the handler racing with the CPR controller. ++ */ ++ local_irq_save(flags); ++ preempt_disable(); ++ ++ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS); ++ up = status & CPR3_IRQ_UP; ++ down = status & CPR3_IRQ_DOWN; ++ ++ if (!up && !down) { ++ /* ++ * Toggle the CPR controller off and then back on since the ++ * hardware and software states are out of sync. This condition ++ * occurs after an aging measurement completes as the CPR IRQ ++ * physically triggers during the aging measurement but the ++ * handler is stuck waiting on the mutex lock. ++ */ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ local_irq_restore(flags); ++ preempt_enable(); ++ ++ /* Wait for the loop disable write to complete */ ++ mb(); ++ ++ /* Wait for BUSY=1 and LOOP_EN=0 in CPR controller registers. */ ++ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) { ++ cpr_status = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ ctl = cpr3_read(ctrl, CPR3_REG_CPR_CTL); ++ if (cpr_status & CPR3_CPR_STATUS_BUSY_MASK ++ && (ctl & CPR3_CPR_CTL_LOOP_EN_MASK) ++ == CPR3_CPR_CTL_LOOP_DISABLE) ++ break; ++ udelay(10); ++ } ++ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10) ++ cpr3_debug(ctrl, "CPR controller not disabled after %d us\n", ++ CPR3_REGISTER_WRITE_DELAY_US); ++ ++ /* Clear interrupt status */ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ ++ /* Wait for the interrupt clearing write to complete */ ++ mb(); ++ ++ /* Wait for IRQ_STATUS register to be cleared. */ ++ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) { ++ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS); ++ if (!(status & (CPR3_IRQ_UP | CPR3_IRQ_DOWN))) ++ break; ++ udelay(10); ++ } ++ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10) ++ cpr3_debug(ctrl, "CPR interrupts not cleared after %d us\n", ++ CPR3_REGISTER_WRITE_DELAY_US); ++ ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ cpr3_debug(ctrl, "CPR interrupt received but no up or down status bit is set\n"); ++ ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++ } else if (up && down) { ++ cpr3_debug(ctrl, "both up and down status bits set\n"); ++ /* The up flag takes precedence over the down flag. */ ++ down = false; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) ++ reg_last_measurement ++ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT); ++ dynamic_floor_volt = cpr3_regulator_get_dynamic_floor_volt(ctrl, ++ reg_last_measurement); ++ ++ local_irq_restore(flags); ++ preempt_enable(); ++ ++ irq_en = aggr->irq_en; ++ last_volt = aggr->last_volt; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ if (cpr3_thread_busy(&ctrl->thread[i])) { ++ cpr3_debug(ctrl, "CPR thread %u busy when it should be waiting for SW cont\n", ++ ctrl->thread[i].thread_id); ++ goto done; ++ } ++ } ++ ++ new_volt = up ? last_volt + ctrl->step_volt ++ : last_volt - ctrl->step_volt; ++ ++ /* Re-enable UP/DOWN interrupt when its opposite is received. */ ++ irq_en |= up ? CPR3_IRQ_DOWN : CPR3_IRQ_UP; ++ ++ if (new_volt > aggr->ceiling_volt) { ++ new_volt = aggr->ceiling_volt; ++ irq_en &= ~CPR3_IRQ_UP; ++ cpr3_debug(ctrl, "limiting to ceiling=%d uV\n", ++ aggr->ceiling_volt); ++ } else if (new_volt < aggr->floor_volt) { ++ new_volt = aggr->floor_volt; ++ irq_en &= ~CPR3_IRQ_DOWN; ++ cpr3_debug(ctrl, "limiting to floor=%d uV\n", aggr->floor_volt); ++ } ++ ++ if (down && new_volt < dynamic_floor_volt) { ++ /* ++ * The vdd-supply voltage should not be decreased below the ++ * dynamic floor voltage. However, it is not necessary (and ++ * counter productive) to force the voltage up to this level ++ * if it happened to be below it since the closed-loop voltage ++ * must have gotten there in a safe manner while the power ++ * domains for the CPR3 regulator imposing the dynamic floor ++ * were not bypassed. ++ */ ++ new_volt = last_volt; ++ irq_en &= ~CPR3_IRQ_DOWN; ++ cpr3_debug(ctrl, "limiting to dynamic floor=%d uV\n", ++ dynamic_floor_volt); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ cpr3_print_result(&ctrl->thread[i]); ++ ++ cpr3_debug(ctrl, "%s: new_volt=%d uV, last_volt=%d uV\n", ++ up ? "UP" : "DN", new_volt, last_volt); ++ ++ if (ctrl->proc_clock_throttle && last_volt == aggr->ceiling_volt ++ && new_volt < last_volt) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ ctrl->proc_clock_throttle); ++ ++ if (new_volt != last_volt) { ++ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt, ++ last_volt, ++ aggr); ++ if (rc) { ++ cpr3_err(ctrl, "scale_vdd() failed to set vdd=%d uV, rc=%d\n", ++ new_volt, rc); ++ goto done; ++ } ++ cont = CPR3_CONT_CMD_ACK; ++ ++ /* ++ * Update the closed-loop voltage for all regulators managed ++ * by this CPR controller. ++ */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ cpr3_update_vreg_closed_loop_volt(vreg, ++ new_volt, reg_last_measurement); ++ } ++ } ++ } ++ ++ if (ctrl->proc_clock_throttle && new_volt == aggr->ceiling_volt) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ ++ corner = &ctrl->thread[0].vreg[0].corner[ ++ ctrl->thread[0].vreg[0].current_corner]; ++ ++ if (irq_en != aggr->irq_en) { ++ aggr->irq_en = irq_en; ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_en); ++ } ++ ++ aggr->last_volt = new_volt; ++ ++done: ++ /* Clear interrupt status */ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ ++ /* ACK or NACK the CPR controller */ ++ cpr3_write(ctrl, CPR3_REG_CONT_CMD, cont); ++ ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++} ++ ++/** ++ * cpr3_ceiling_irq_handler() - CPR ceiling reached interrupt handler callback ++ * function used for hardware closed-loop operation ++ * @irq: CPR ceiling interrupt number ++ * @data: Private data corresponding to the CPR3 controller ++ * pointer ++ * ++ * This function disables processor clock throttling and closed-loop operation ++ * when the ceiling voltage is reached. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t cpr3_ceiling_irq_handler(int irq, void *data) ++{ ++ struct cpr3_controller *ctrl = data; ++ int volt; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is disabled\n"); ++ goto done; ++ } else if (!ctrl->use_hw_closed_loop) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is using SW closed-loop\n"); ++ goto done; ++ } ++ ++ volt = regulator_get_voltage(ctrl->vdd_regulator); ++ if (volt < 0) { ++ cpr3_err(ctrl, "could not get vdd voltage, rc=%d\n", volt); ++ goto done; ++ } else if (volt != ctrl->aggr_corner.ceiling_volt) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but vdd voltage: %d uV != ceiling voltage: %d uV\n", ++ volt, ctrl->aggr_corner.ceiling_volt); ++ goto done; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ /* ++ * Since the ceiling voltage has been reached, disable processor ++ * clock throttling as well as CPR closed-loop operation. ++ */ ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ cpr3_ctrl_loop_disable(ctrl); ++ cpr3_debug(ctrl, "CPR closed-loop and throttling disabled\n"); ++ } ++ ++done: ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++} ++ ++/** ++ * cpr3_regulator_vreg_register() - register a regulator device for a CPR3 ++ * regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function initializes all regulator framework related structures and then ++ * calls regulator_register() for the CPR3 regulator. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_vreg_register(struct cpr3_regulator *vreg) ++{ ++ struct regulator_config config = {}; ++ struct regulator_desc *rdesc; ++ struct regulator_init_data *init_data; ++ int rc; ++ ++ init_data = of_get_regulator_init_data(vreg->thread->ctrl->dev, ++ vreg->of_node, &vreg->rdesc); ++ if (!init_data) { ++ cpr3_err(vreg, "regulator init data is missing\n"); ++ return -EINVAL; ++ } ++ ++ init_data->constraints.input_uV = init_data->constraints.max_uV; ++ rdesc = &vreg->rdesc; ++ init_data->constraints.valid_ops_mask |= ++ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS; ++ rdesc->ops = &cpr3_regulator_ops; ++ ++ rdesc->n_voltages = vreg->corner_count; ++ rdesc->name = init_data->constraints.name; ++ rdesc->owner = THIS_MODULE; ++ rdesc->type = REGULATOR_VOLTAGE; ++ ++ config.dev = vreg->thread->ctrl->dev; ++ config.driver_data = vreg; ++ config.init_data = init_data; ++ config.of_node = vreg->of_node; ++ ++ vreg->rdev = regulator_register(rdesc, &config); ++ if (IS_ERR(vreg->rdev)) { ++ rc = PTR_ERR(vreg->rdev); ++ cpr3_err(vreg, "regulator_register failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++static int debugfs_int_set(void *data, u64 val) ++{ ++ *(int *)data = val; ++ return 0; ++} ++ ++static int debugfs_int_get(void *data, u64 *val) ++{ ++ *val = *(int *)data; ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(fops_int, debugfs_int_get, debugfs_int_set, "%lld\n"); ++DEFINE_SIMPLE_ATTRIBUTE(fops_int_ro, debugfs_int_get, NULL, "%lld\n"); ++DEFINE_SIMPLE_ATTRIBUTE(fops_int_wo, NULL, debugfs_int_set, "%lld\n"); ++ ++/** ++ * debugfs_create_int - create a debugfs file that is used to read and write a ++ * signed int value ++ * @name: Pointer to a string containing the name of the file to ++ * create ++ * @mode: The permissions that the file should have ++ * @parent: Pointer to the parent dentry for this file. This should ++ * be a directory dentry if set. If this parameter is ++ * %NULL, then the file will be created in the root of the ++ * debugfs filesystem. ++ * @value: Pointer to the variable that the file should read to and ++ * write from ++ * ++ * This function creates a file in debugfs with the given name that ++ * contains the value of the variable @value. If the @mode variable is so ++ * set, it can be read from, and written to. ++ * ++ * This function will return a pointer to a dentry if it succeeds. This ++ * pointer must be passed to the debugfs_remove() function when the file is ++ * to be removed. If an error occurs, %NULL will be returned. ++ */ ++static struct dentry *debugfs_create_int(const char *name, umode_t mode, ++ struct dentry *parent, int *value) ++{ ++ /* if there are no write bits set, make read only */ ++ if (!(mode & S_IWUGO)) ++ return debugfs_create_file(name, mode, parent, value, ++ &fops_int_ro); ++ /* if there are no read bits set, make write only */ ++ if (!(mode & S_IRUGO)) ++ return debugfs_create_file(name, mode, parent, value, ++ &fops_int_wo); ++ ++ return debugfs_create_file(name, mode, parent, value, &fops_int); ++} ++ ++static int debugfs_bool_get(void *data, u64 *val) ++{ ++ *val = *(bool *)data; ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(fops_bool_ro, debugfs_bool_get, NULL, "%lld\n"); ++ ++/** ++ * struct cpr3_debug_corner_info - data structure used by the ++ * cpr3_debugfs_create_corner_int function ++ * @vreg: Pointer to the CPR3 regulator ++ * @index: Pointer to the corner array index ++ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner ++ * to the beginning of the value to be read from ++ * @corner: Pointer to the CPR3 corner array ++ */ ++struct cpr3_debug_corner_info { ++ struct cpr3_regulator *vreg; ++ int *index; ++ size_t member_offset; ++ struct cpr3_corner *corner; ++}; ++ ++static int cpr3_debug_corner_int_get(void *data, u64 *val) ++{ ++ struct cpr3_debug_corner_info *info = data; ++ struct cpr3_controller *ctrl = info->vreg->thread->ctrl; ++ int i; ++ ++ mutex_lock(&ctrl->lock); ++ ++ i = *info->index; ++ if (i < 0) ++ i = 0; ++ ++ *val = *(int *)((char *)&info->vreg->corner[i] + info->member_offset); ++ ++ mutex_unlock(&ctrl->lock); ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_int_fops, cpr3_debug_corner_int_get, ++ NULL, "%lld\n"); ++ ++/** ++ * cpr3_debugfs_create_corner_int - create a debugfs file that is used to read ++ * a signed int value out of a CPR3 regulator's corner array ++ * @vreg: Pointer to the CPR3 regulator ++ * @name: Pointer to a string containing the name of the file to ++ * create ++ * @mode: The permissions that the file should have ++ * @parent: Pointer to the parent dentry for this file. This should ++ * be a directory dentry if set. If this parameter is ++ * %NULL, then the file will be created in the root of the ++ * debugfs filesystem. ++ * @index: Pointer to the corner array index ++ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner ++ * to the beginning of the value to be read from ++ * ++ * This function creates a file in debugfs with the given name that ++ * contains the value of the int type variable vreg->corner[index].member ++ * where member_offset == offsetof(struct cpr3_corner, member). ++ */ ++static struct dentry *cpr3_debugfs_create_corner_int( ++ struct cpr3_regulator *vreg, const char *name, umode_t mode, ++ struct dentry *parent, int *index, size_t member_offset) ++{ ++ struct cpr3_debug_corner_info *info; ++ ++ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return NULL; ++ ++ info->vreg = vreg; ++ info->index = index; ++ info->member_offset = member_offset; ++ ++ return debugfs_create_file(name, mode, parent, info, ++ &cpr3_debug_corner_int_fops); ++} ++ ++static int cpr3_debug_quot_open(struct inode *inode, struct file *file) ++{ ++ struct cpr3_debug_corner_info *info = inode->i_private; ++ struct cpr3_thread *thread = info->vreg->thread; ++ int size, i, pos; ++ u32 *quot; ++ char *buf; ++ ++ /* ++ * Max size: ++ * - 10 digits + ' ' or '\n' = 11 bytes per number ++ * - terminating '\0' ++ */ ++ size = CPR3_RO_COUNT * 11; ++ buf = kzalloc(size + 1, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ file->private_data = buf; ++ ++ mutex_lock(&thread->ctrl->lock); ++ ++ quot = info->corner[*info->index].target_quot; ++ ++ for (i = 0, pos = 0; i < CPR3_RO_COUNT; i++) ++ pos += scnprintf(buf + pos, size - pos, "%u%c", ++ quot[i], i < CPR3_RO_COUNT - 1 ? ' ' : '\n'); ++ ++ mutex_unlock(&thread->ctrl->lock); ++ ++ return nonseekable_open(inode, file); ++} ++ ++static ssize_t cpr3_debug_quot_read(struct file *file, char __user *buf, ++ size_t len, loff_t *ppos) ++{ ++ return simple_read_from_buffer(buf, len, ppos, file->private_data, ++ strlen(file->private_data)); ++} ++ ++static int cpr3_debug_quot_release(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ ++ return 0; ++} ++ ++static const struct file_operations cpr3_debug_quot_fops = { ++ .owner = THIS_MODULE, ++ .open = cpr3_debug_quot_open, ++ .release = cpr3_debug_quot_release, ++ .read = cpr3_debug_quot_read, ++ .llseek = no_llseek, ++}; ++ ++/** ++ * cpr3_regulator_debugfs_corner_add() - add debugfs files to expose ++ * configuration data for the CPR corner ++ * @vreg: Pointer to the CPR3 regulator ++ * @corner_dir: Pointer to the parent corner dentry for the new files ++ * @index: Pointer to the corner array index ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_corner_add(struct cpr3_regulator *vreg, ++ struct dentry *corner_dir, int *index) ++{ ++ struct cpr3_debug_corner_info *info; ++ struct dentry *temp; ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "floor_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, floor_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "floor_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "ceiling_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, ceiling_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "ceiling_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "open_loop_volt", S_IRUGO, ++ corner_dir, index, ++ offsetof(struct cpr3_corner, open_loop_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "open_loop_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "last_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, last_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "last_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return; ++ ++ info->vreg = vreg; ++ info->index = index; ++ info->corner = vreg->corner; ++ ++ temp = debugfs_create_file("target_quots", S_IRUGO, corner_dir, ++ info, &cpr3_debug_quot_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "target_quots debugfs file creation failed\n"); ++ return; ++ } ++} ++ ++/** ++ * cpr3_debug_corner_index_set() - debugfs callback used to change the ++ * value of the CPR3 regulator debug_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: New value for debug_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_corner_index_set(void *data, u64 val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ if (val < CPR3_CORNER_OFFSET || val > vreg->corner_count) { ++ cpr3_err(vreg, "invalid corner index %llu; allowed values: %d-%d\n", ++ val, CPR3_CORNER_OFFSET, vreg->corner_count); ++ return -EINVAL; ++ } ++ ++ mutex_lock(&vreg->thread->ctrl->lock); ++ vreg->debug_corner = val - CPR3_CORNER_OFFSET; ++ mutex_unlock(&vreg->thread->ctrl->lock); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_debug_corner_index_get() - debugfs callback used to retrieve ++ * the value of the CPR3 regulator debug_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: Output parameter written with the value of ++ * debug_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_corner_index_get(void *data, u64 *val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ *val = vreg->debug_corner + CPR3_CORNER_OFFSET; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_index_fops, ++ cpr3_debug_corner_index_get, ++ cpr3_debug_corner_index_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_current_corner_index_get() - debugfs callback used to retrieve ++ * the value of the CPR3 regulator current_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: Output parameter written with the value of ++ * current_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_current_corner_index_get(void *data, u64 *val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ *val = vreg->current_corner + CPR3_CORNER_OFFSET; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_current_corner_index_fops, ++ cpr3_debug_current_corner_index_get, ++ NULL, "%llu\n"); ++ ++/** ++ * cpr3_regulator_debugfs_vreg_add() - add debugfs files to expose configuration ++ * data for the CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @thread_dir CPR3 thread debugfs directory handle ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_vreg_add(struct cpr3_regulator *vreg, ++ struct dentry *thread_dir) ++{ ++ struct dentry *temp, *corner_dir, *vreg_dir; ++ ++ vreg_dir = debugfs_create_dir(vreg->name, thread_dir); ++ if (IS_ERR_OR_NULL(vreg_dir)) { ++ cpr3_err(vreg, "%s debugfs directory creation failed\n", ++ vreg->name); ++ return; ++ } ++ ++ temp = debugfs_create_int("speed_bin_fuse", S_IRUGO, vreg_dir, ++ &vreg->speed_bin_fuse); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "speed_bin_fuse debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("cpr_rev_fuse", S_IRUGO, vreg_dir, ++ &vreg->cpr_rev_fuse); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "cpr_rev_fuse debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("fuse_combo", S_IRUGO, vreg_dir, ++ &vreg->fuse_combo); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "fuse_combo debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("corner_count", S_IRUGO, vreg_dir, ++ &vreg->corner_count); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "corner_count debugfs file creation failed\n"); ++ return; ++ } ++ ++ corner_dir = debugfs_create_dir("corner", vreg_dir); ++ if (IS_ERR_OR_NULL(corner_dir)) { ++ cpr3_err(vreg, "corner debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("index", S_IRUGO | S_IWUSR, corner_dir, ++ vreg, &cpr3_debug_corner_index_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "index debugfs file creation failed\n"); ++ return; ++ } ++ ++ cpr3_regulator_debugfs_corner_add(vreg, corner_dir, ++ &vreg->debug_corner); ++ ++ corner_dir = debugfs_create_dir("current_corner", vreg_dir); ++ if (IS_ERR_OR_NULL(corner_dir)) { ++ cpr3_err(vreg, "current_corner debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("index", S_IRUGO, corner_dir, ++ vreg, &cpr3_debug_current_corner_index_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "index debugfs file creation failed\n"); ++ return; ++ } ++ ++ cpr3_regulator_debugfs_corner_add(vreg, corner_dir, ++ &vreg->current_corner); ++} ++ ++/** ++ * cpr3_regulator_debugfs_thread_add() - add debugfs files to expose ++ * configuration data for the CPR thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_thread_add(struct cpr3_thread *thread) ++{ ++ struct cpr3_controller *ctrl = thread->ctrl; ++ struct dentry *aggr_dir, *temp, *thread_dir; ++ struct cpr3_debug_corner_info *info; ++ char buf[20]; ++ int *index; ++ int i; ++ ++ scnprintf(buf, sizeof(buf), "thread%u", thread->thread_id); ++ thread_dir = debugfs_create_dir(buf, thread->ctrl->debugfs); ++ if (IS_ERR_OR_NULL(thread_dir)) { ++ cpr3_err(ctrl, "thread %u %s debugfs directory creation failed\n", ++ thread->thread_id, buf); ++ return; ++ } ++ ++ aggr_dir = debugfs_create_dir("max_aggregated_params", thread_dir); ++ if (IS_ERR_OR_NULL(aggr_dir)) { ++ cpr3_err(ctrl, "thread %u max_aggregated_params debugfs directory creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.floor_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr floor_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.ceiling_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr ceiling_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.open_loop_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr open_loop_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.last_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr last_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ info = devm_kzalloc(thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ index = devm_kzalloc(thread->ctrl->dev, sizeof(*index), GFP_KERNEL); ++ if (!info || !index) ++ return; ++ *index = 0; ++ info->vreg = &thread->vreg[0]; ++ info->index = index; ++ info->corner = &thread->aggr_corner; ++ ++ temp = debugfs_create_file("target_quots", S_IRUGO, aggr_dir, ++ info, &cpr3_debug_quot_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u target_quots debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ for (i = 0; i < thread->vreg_count; i++) ++ cpr3_regulator_debugfs_vreg_add(&thread->vreg[i], thread_dir); ++} ++ ++/** ++ * cpr3_debug_closed_loop_enable_set() - debugfs callback used to change the ++ * value of the CPR controller cpr_allowed_sw flag which enables or ++ * disables closed-loop operation ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: New value for cpr_allowed_sw ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_closed_loop_enable_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ bool enable = !!val; ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->cpr_allowed_sw == enable) ++ goto done; ++ ++ if (enable && !ctrl->cpr_allowed_hw) { ++ cpr3_err(ctrl, "CPR closed-loop operation is not allowed\n"); ++ goto done; ++ } ++ ++ ctrl->cpr_allowed_sw = enable; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not change CPR enable state=%u, rc=%d\n", ++ enable, rc); ++ goto done; ++ } ++ ++ if (ctrl->proc_clock_throttle && !ctrl->cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ctrl->cpr_enabled = true; ++ ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ cpr3_debug(ctrl, "closed-loop=%s\n", enable ? "enabled" : "disabled"); ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_debug_closed_loop_enable_get() - debugfs callback used to retrieve ++ * the value of the CPR controller cpr_allowed_sw flag which ++ * indicates if closed-loop operation is enabled ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Output parameter written with the value of ++ * cpr_allowed_sw ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_closed_loop_enable_get(void *data, u64 *val) ++{ ++ struct cpr3_controller *ctrl = data; ++ ++ *val = ctrl->cpr_allowed_sw; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_closed_loop_enable_fops, ++ cpr3_debug_closed_loop_enable_get, ++ cpr3_debug_closed_loop_enable_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_hw_closed_loop_enable_set() - debugfs callback used to change the ++ * value of the CPR controller use_hw_closed_loop flag which ++ * switches between software closed-loop and hardware closed-loop ++ * operation for CPR3 and CPR4 controllers and between open-loop ++ * and full hardware closed-loop operation for CPRh controllers. ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: New value for use_hw_closed_loop ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_hw_closed_loop_enable_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ bool use_hw_closed_loop = !!val; ++ struct cpr3_regulator *vreg; ++ bool cpr_enabled; ++ int i, j, k, rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->use_hw_closed_loop == use_hw_closed_loop) ++ goto done; ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ ctrl->use_hw_closed_loop = use_hw_closed_loop; ++ ++ cpr_enabled = ctrl->cpr_enabled; ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ goto done; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ if (ctrl->use_hw_closed_loop) ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, 0); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ if (ctrl->use_hw_closed_loop && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = regulator_enable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } else if (!ctrl->use_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = regulator_disable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator disable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ /* ++ * Due to APM and mem-acc floor restriction constraints, ++ * the closed-loop voltage may be different when using ++ * software closed-loop vs hardware closed-loop. Therefore, ++ * reset the cached closed-loop voltage for all corners to the ++ * corresponding open-loop voltage when switching between ++ * SW and HW closed-loop mode. ++ */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ for (k = 0; k < vreg->corner_count; k++) ++ vreg->corner[k].last_volt ++ = vreg->corner[k].open_loop_volt; ++ } ++ } ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not change CPR HW closed-loop enable state=%u, rc=%d\n", ++ use_hw_closed_loop, rc); ++ goto done; ++ } ++ ++ cpr3_debug(ctrl, "CPR mode=%s\n", ++ use_hw_closed_loop ? ++ "HW closed-loop" : "SW closed-loop"); ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_debug_hw_closed_loop_enable_get() - debugfs callback used to retrieve ++ * the value of the CPR controller use_hw_closed_loop flag which ++ * indicates if hardware closed-loop operation is being used in ++ * place of software closed-loop operation ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Output parameter written with the value of ++ * use_hw_closed_loop ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_hw_closed_loop_enable_get(void *data, u64 *val) ++{ ++ struct cpr3_controller *ctrl = data; ++ ++ *val = ctrl->use_hw_closed_loop; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_hw_closed_loop_enable_fops, ++ cpr3_debug_hw_closed_loop_enable_get, ++ cpr3_debug_hw_closed_loop_enable_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_trigger_aging_measurement_set() - debugfs callback used to trigger ++ * another CPR measurement ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Unused ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_trigger_aging_measurement_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX); ++ ctrl->aging_required = true; ++ ctrl->aging_succeeded = false; ++ ctrl->aging_failed = false; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not update the CPR controller state, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_trigger_aging_measurement_fops, ++ NULL, ++ cpr3_debug_trigger_aging_measurement_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_regulator_debugfs_ctrl_add() - add debugfs files to expose configuration ++ * data for the CPR controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_ctrl_add(struct cpr3_controller *ctrl) ++{ ++ struct dentry *temp, *aggr_dir; ++ int i; ++ ++ /* Add cpr3-regulator base directory if it isn't present already. */ ++ if (cpr3_debugfs_base == NULL) { ++ cpr3_debugfs_base = debugfs_create_dir("cpr3-regulator", NULL); ++ if (IS_ERR_OR_NULL(cpr3_debugfs_base)) { ++ cpr3_err(ctrl, "cpr3-regulator debugfs base directory creation failed\n"); ++ cpr3_debugfs_base = NULL; ++ return; ++ } ++ } ++ ++ ctrl->debugfs = debugfs_create_dir(ctrl->name, cpr3_debugfs_base); ++ if (IS_ERR_OR_NULL(ctrl->debugfs)) { ++ cpr3_err(ctrl, "cpr3-regulator controller debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("cpr_closed_loop_enable", S_IRUGO | S_IWUSR, ++ ctrl->debugfs, ctrl, ++ &cpr3_debug_closed_loop_enable_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "cpr_closed_loop_enable debugfs file creation failed\n"); ++ return; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ temp = debugfs_create_file("use_hw_closed_loop", ++ S_IRUGO | S_IWUSR, ctrl->debugfs, ctrl, ++ &cpr3_debug_hw_closed_loop_enable_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "use_hw_closed_loop debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ temp = debugfs_create_int("thread_count", S_IRUGO, ctrl->debugfs, ++ &ctrl->thread_count); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread_count debugfs file creation failed\n"); ++ return; ++ } ++ ++ if (ctrl->apm) { ++ temp = debugfs_create_int("apm_threshold_volt", S_IRUGO, ++ ctrl->debugfs, &ctrl->apm_threshold_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "apm_threshold_volt debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ if (ctrl->aging_required || ctrl->aging_succeeded ++ || ctrl->aging_failed) { ++ temp = debugfs_create_int("aging_adj_volt", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_ref_adjust_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_adj_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_succeeded", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_succeeded, &fops_bool_ro); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_succeeded debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_failed", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_failed, &fops_bool_ro); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_failed debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_trigger", S_IWUSR, ++ ctrl->debugfs, ctrl, ++ &cpr3_debug_trigger_aging_measurement_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_trigger debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ aggr_dir = debugfs_create_dir("max_aggregated_voltages", ctrl->debugfs); ++ if (IS_ERR_OR_NULL(aggr_dir)) { ++ cpr3_err(ctrl, "max_aggregated_voltages debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.floor_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr floor_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.ceiling_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr ceiling_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.open_loop_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr open_loop_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.last_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr last_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ cpr3_regulator_debugfs_thread_add(&ctrl->thread[i]); ++} ++ ++/** ++ * cpr3_regulator_debugfs_ctrl_remove() - remove debugfs files for the CPR ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Note, this function must be called after the controller has been removed from ++ * cpr3_controller_list and while the cpr3_controller_list_mutex lock is held. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_ctrl_remove(struct cpr3_controller *ctrl) ++{ ++ if (list_empty(&cpr3_controller_list)) { ++ debugfs_remove_recursive(cpr3_debugfs_base); ++ cpr3_debugfs_base = NULL; ++ } else { ++ debugfs_remove_recursive(ctrl->debugfs); ++ } ++} ++ ++/** ++ * cpr3_regulator_init_ctrl_data() - performs initialization of CPR controller ++ * elements ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ /* Read the initial vdd voltage from hardware. */ ++ ctrl->aggr_corner.last_volt ++ = regulator_get_voltage(ctrl->vdd_regulator); ++ if (ctrl->aggr_corner.last_volt < 0) { ++ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n", ++ ctrl->aggr_corner.last_volt); ++ return ctrl->aggr_corner.last_volt; ++ } ++ ctrl->aggr_corner.open_loop_volt = ctrl->aggr_corner.last_volt; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_vreg_data() - performs initialization of common CPR3 ++ * regulator elements and validate aging configurations ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_vreg_data(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ bool init_aging; ++ ++ vreg->current_corner = CPR3_REGULATOR_CORNER_INVALID; ++ vreg->last_closed_loop_corner = CPR3_REGULATOR_CORNER_INVALID; ++ ++ init_aging = vreg->aging_allowed && vreg->thread->ctrl->aging_required; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt; ++ vreg->corner[i].irq_en = CPR3_IRQ_UP | CPR3_IRQ_DOWN; ++ ++ vreg->corner[i].ro_mask = 0; ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] == 0) ++ vreg->corner[i].ro_mask |= BIT(j); ++ } ++ ++ if (init_aging) { ++ vreg->corner[i].unaged_floor_volt ++ = vreg->corner[i].floor_volt; ++ vreg->corner[i].unaged_ceiling_volt ++ = vreg->corner[i].ceiling_volt; ++ vreg->corner[i].unaged_open_loop_volt ++ = vreg->corner[i].open_loop_volt; ++ } ++ ++ if (vreg->aging_allowed) { ++ if (vreg->corner[i].unaged_floor_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_floor_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_floor_volt); ++ return -EINVAL; ++ } ++ if (vreg->corner[i].unaged_ceiling_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_ceiling_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_ceiling_volt); ++ return -EINVAL; ++ } ++ if (vreg->corner[i].unaged_open_loop_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_open_loop_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_open_loop_volt); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ if (vreg->aging_allowed && vreg->corner[vreg->aging_corner].ceiling_volt ++ > vreg->thread->ctrl->aging_ref_volt) { ++ cpr3_err(vreg, "aging corner %d ceiling voltage = %d > aging ref voltage = %d uV\n", ++ vreg->aging_corner, ++ vreg->corner[vreg->aging_corner].ceiling_volt, ++ vreg->thread->ctrl->aging_ref_volt); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_suspend() - perform common required CPR3 power down steps ++ * before the system enters suspend ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_suspend(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ mutex_unlock(&ctrl->lock); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ rc = cpr3_closed_loop_disable(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc); ++ ++ ctrl->cpr_suspended = true; ++ ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_resume() - perform common required CPR3 power up steps after ++ * the system resumes from suspend ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_resume(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ ctrl->cpr_suspended = false; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc); ++ ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_validate_controller() - verify the data passed in via the ++ * cpr3_controller data structure ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_validate_controller(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ int i, j, allow_boost_vreg_count = 0; ++ ++ if (!ctrl->vdd_regulator) { ++ cpr3_err(ctrl, "vdd regulator missing\n"); ++ return -EINVAL; ++ } else if (ctrl->sensor_count <= 0 ++ || ctrl->sensor_count > CPR3_MAX_SENSOR_COUNT) { ++ cpr3_err(ctrl, "invalid CPR sensor count=%d\n", ++ ctrl->sensor_count); ++ return -EINVAL; ++ } else if (!ctrl->sensor_owner) { ++ cpr3_err(ctrl, "CPR sensor ownership table missing\n"); ++ return -EINVAL; ++ } ++ ++ if (ctrl->aging_required) { ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ if (ctrl->aging_sensor[i].sensor_id ++ >= ctrl->sensor_count) { ++ cpr3_err(ctrl, "aging_sensor[%d] id=%u is not in the value range 0-%d", ++ i, ctrl->aging_sensor[i].sensor_id, ++ ctrl->sensor_count - 1); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ if (vreg->allow_boost) ++ allow_boost_vreg_count++; ++ } ++ } ++ ++ if (allow_boost_vreg_count > 1) { ++ /* ++ * Boost feature is not allowed to be used for more ++ * than one CPR3 regulator of a CPR3 controller. ++ */ ++ cpr3_err(ctrl, "Boost feature is enabled for more than one regulator\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_panic_callback() - panic notification callback function. This function ++ * is invoked when a kernel panic occurs. ++ * @nfb: Notifier block pointer of CPR3 controller ++ * @event: Value passed unmodified to notifier function ++ * @data: Pointer passed unmodified to notifier function ++ * ++ * Return: NOTIFY_OK ++ */ ++static int cpr3_panic_callback(struct notifier_block *nfb, ++ unsigned long event, void *data) ++{ ++ struct cpr3_controller *ctrl = container_of(nfb, ++ struct cpr3_controller, panic_notifier); ++ struct cpr3_panic_regs_info *regs_info = ctrl->panic_regs_info; ++ struct cpr3_reg_info *reg; ++ int i = 0; ++ ++ for (i = 0; i < regs_info->reg_count; i++) { ++ reg = &(regs_info->regs[i]); ++ reg->value = readl_relaxed(reg->virt_addr); ++ pr_err("%s[0x%08x] = 0x%08x\n", reg->name, reg->addr, ++ reg->value); ++ } ++ /* ++ * Barrier to ensure that the information has been updated in the ++ * structure. ++ */ ++ mb(); ++ ++ return NOTIFY_OK; ++} ++ ++/** ++ * cpr3_regulator_register() - register the regulators for a CPR3 controller and ++ * perform CPR hardware initialization ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ int i, j, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "%s: Device tree node is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl || !ctrl->name) { ++ dev_err(dev, "%s: CPR controller data is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_regulator_validate_controller(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "controller validation failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ mutex_init(&ctrl->lock); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cpr_ctrl"); ++ if (!res || !res->start) { ++ cpr3_err(ctrl, "CPR controller address is missing\n"); ++ return -ENXIO; ++ } ++ ctrl->cpr_ctrl_base = devm_ioremap(dev, res->start, resource_size(res)); ++ ++ if (ctrl->aging_possible_mask) { ++ /* ++ * Aging possible register address is required if an aging ++ * possible mask has been specified. ++ */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "aging_allowed"); ++ if (!res || !res->start) { ++ cpr3_err(ctrl, "CPR aging allowed address is missing\n"); ++ return -ENXIO; ++ } ++ ctrl->aging_possible_reg = devm_ioremap(dev, res->start, ++ resource_size(res)); ++ } ++ ++ ctrl->irq = platform_get_irq_byname(pdev, "cpr"); ++ if (ctrl->irq < 0) { ++ cpr3_err(ctrl, "missing CPR interrupt\n"); ++ return ctrl->irq; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ ctrl->ceiling_irq = platform_get_irq_byname(pdev, ++ "ceiling"); ++ if (ctrl->ceiling_irq < 0) { ++ cpr3_err(ctrl, "missing ceiling interrupt\n"); ++ return ctrl->ceiling_irq; ++ } ++ } ++ } ++ ++ rc = cpr3_regulator_init_ctrl_data(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_init_vreg_data( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) ++ return rc; ++ cpr3_print_quots(&ctrl->thread[i].vreg[j]); ++ } ++ } ++ ++ /* ++ * Add the maximum possible aging voltage margin until it is possible ++ * to perform an aging measurement. ++ */ ++ if (ctrl->aging_required) ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX); ++ ++ rc = cpr3_regulator_init_ctrl(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* Register regulator devices for all threads. */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_vreg_register( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n", ++ rc); ++ goto free_regulators; ++ } ++ } ++ } ++ ++ rc = devm_request_threaded_irq(dev, ctrl->irq, NULL, ++ cpr3_irq_handler, ++ IRQF_ONESHOT | ++ IRQF_TRIGGER_RISING, ++ "cpr3", ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not request IRQ %d, rc=%d\n", ++ ctrl->irq, rc); ++ goto free_regulators; ++ } ++ ++ if (ctrl->supports_hw_closed_loop && ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = devm_request_threaded_irq(dev, ctrl->ceiling_irq, NULL, ++ cpr3_ceiling_irq_handler, ++ IRQF_ONESHOT | IRQF_TRIGGER_RISING, ++ "cpr3_ceiling", ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not request ceiling IRQ %d, rc=%d\n", ++ ctrl->ceiling_irq, rc); ++ goto free_regulators; ++ } ++ } ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ cpr3_regulator_debugfs_ctrl_add(ctrl); ++ list_add(&ctrl->list, &cpr3_controller_list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->panic_regs_info) { ++ /* Register panic notification call back */ ++ ctrl->panic_notifier.notifier_call = cpr3_panic_callback; ++ atomic_notifier_chain_register(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ } ++ ++ return 0; ++ ++free_regulators: ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev)) ++ regulator_unregister( ++ ctrl->thread[i].vreg[j].rdev); ++ return rc; ++} ++ ++/** ++ * cpr3_open_loop_regulator_register() - register the regulators for a CPR3 ++ * controller which will always work in Open loop and ++ * won't support close loop. ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_regulator *vreg; ++ int i, j, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "%s: Device tree node is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl || !ctrl->name) { ++ dev_err(dev, "%s: CPR controller data is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl->vdd_regulator) { ++ cpr3_err(ctrl, "vdd regulator missing\n"); ++ return -EINVAL; ++ } ++ ++ mutex_init(&ctrl->lock); ++ ++ rc = cpr3_regulator_init_ctrl_data(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg->corner[i].last_volt = ++ vreg->corner[i].open_loop_volt; ++ } ++ } ++ ++ /* Register regulator devices for all threads. */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_vreg_register( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n", ++ rc); ++ goto free_regulators; ++ } ++ } ++ } ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_add(&ctrl->list, &cpr3_controller_list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ return 0; ++ ++free_regulators: ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev)) ++ regulator_unregister( ++ ctrl->thread[i].vreg[j].rdev); ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_unregister() - unregister the regulators for a CPR3 controller ++ * and perform CPR hardware shutdown ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ int i, j, rc = 0; ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_del(&ctrl->list); ++ cpr3_regulator_debugfs_ctrl_remove(ctrl); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_closed_loop_disable(ctrl); ++ ++ if (ctrl->vdd_limit_regulator) { ++ regulator_disable(ctrl->vdd_limit_regulator); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ regulator_unregister(ctrl->thread[i].vreg[j].rdev); ++ ++ if (ctrl->panic_notifier.notifier_call) ++ atomic_notifier_chain_unregister(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_open_loop_regulator_unregister() - unregister the regulators for a CPR3 ++ * open loop controller and perform CPR hardware shutdown ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ int i, j; ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_del(&ctrl->list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->vdd_limit_regulator) { ++ regulator_disable(ctrl->vdd_limit_regulator); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ regulator_unregister(ctrl->thread[i].vreg[j].rdev); ++ ++ if (ctrl->panic_notifier.notifier_call) ++ atomic_notifier_chain_unregister(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/regulator/cpr3-regulator.h +@@ -0,0 +1,1211 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __REGULATOR_CPR3_REGULATOR_H__ ++#define __REGULATOR_CPR3_REGULATOR_H__ ++ ++#include <linux/clk.h> ++#include <linux/mutex.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/types.h> ++#include <linux/power/qcom/apm.h> ++#include <linux/regulator/driver.h> ++ ++struct cpr3_controller; ++struct cpr3_thread; ++ ++/** ++ * struct cpr3_fuse_param - defines one contiguous segment of a fuse parameter ++ * that is contained within a given row. ++ * @row: Fuse row number ++ * @bit_start: The first bit within the row of the fuse parameter segment ++ * @bit_end: The last bit within the row of the fuse parameter segment ++ * ++ * Each fuse row is 64 bits in length. bit_start and bit_end may take values ++ * from 0 to 63. bit_start must be less than or equal to bit_end. ++ */ ++struct cpr3_fuse_param { ++ unsigned row; ++ unsigned bit_start; ++ unsigned bit_end; ++}; ++ ++/* Each CPR3 sensor has 16 ring oscillators */ ++#define CPR3_RO_COUNT 16 ++ ++/* The maximum number of sensors that can be present on a single CPR loop. */ ++#define CPR3_MAX_SENSOR_COUNT 256 ++ ++/* This constant is used when allocating array printing buffers. */ ++#define MAX_CHARS_PER_INT 10 ++ ++/** ++ * struct cpr4_sdelta - CPR4 controller specific data structure for the sdelta ++ * adjustment table which is used to adjust the VDD supply ++ * voltage automatically based upon the temperature and/or ++ * the number of online CPU cores. ++ * @allow_core_count_adj: Core count adjustments are allowed. ++ * @allow_temp_adj: Temperature based adjustments are allowed. ++ * @max_core_count: Maximum number of cores considered for core count ++ * adjustment logic. ++ * @temp_band_count: Number of temperature bands considered for temperature ++ * based adjustment logic. ++ * @cap_volt: CAP in uV to apply to SDELTA margins with multiple ++ * cpr3-regulators defined for single controller. ++ * @table: SDELTA table with per-online-core and temperature based ++ * adjustments of size (max_core_count * temp_band_count) ++ * Outer: core count ++ * Inner: temperature band ++ * Each element has units of VDD supply steps. Positive ++ * values correspond to a reduction in voltage and negative ++ * value correspond to an increase (this follows the SDELTA ++ * register semantics). ++ * @allow_boost: Voltage boost allowed. ++ * @boost_num_cores: The number of online cores at which the boost voltage ++ * adjustments will be applied ++ * @boost_table: SDELTA table with boost voltage adjustments of size ++ * temp_band_count. Each element has units of VDD supply ++ * steps. Positive values correspond to a reduction in ++ * voltage and negative value correspond to an increase ++ * (this follows the SDELTA register semantics). ++ */ ++struct cpr4_sdelta { ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ int max_core_count; ++ int temp_band_count; ++ int cap_volt; ++ int *table; ++ bool allow_boost; ++ int boost_num_cores; ++ int *boost_table; ++}; ++ ++/** ++ * struct cpr3_corner - CPR3 virtual voltage corner data structure ++ * @floor_volt: CPR closed-loop floor voltage in microvolts ++ * @ceiling_volt: CPR closed-loop ceiling voltage in microvolts ++ * @open_loop_volt: CPR open-loop voltage (i.e. initial voltage) in ++ * microvolts ++ * @last_volt: Last known settled CPR closed-loop voltage which is used ++ * when switching to a new corner ++ * @abs_ceiling_volt: The absolute CPR closed-loop ceiling voltage in ++ * microvolts. This is used to limit the ceiling_volt ++ * value when it is increased as a result of aging ++ * adjustment. ++ * @unaged_floor_volt: The CPR closed-loop floor voltage in microvolts before ++ * any aging adjustment is performed ++ * @unaged_ceiling_volt: The CPR closed-loop ceiling voltage in microvolts ++ * before any aging adjustment is performed ++ * @unaged_open_loop_volt: The CPR open-loop voltage (i.e. initial voltage) in ++ * microvolts before any aging adjusment is performed ++ * @system_volt: The system-supply voltage in microvolts or corners or ++ * levels ++ * @mem_acc_volt: The mem-acc-supply voltage in corners ++ * @proc_freq: Processor frequency in Hertz. For CPR rev. 3 and 4 ++ * conrollers, this field is only used by platform specific ++ * CPR3 driver for interpolation. For CPRh-compliant ++ * controllers, this frequency is also utilized by the ++ * clock driver to determine the corner to CPU clock ++ * frequency mappings. ++ * @cpr_fuse_corner: Fused corner index associated with this virtual corner ++ * (only used by platform specific CPR3 driver for ++ * mapping purposes) ++ * @target_quot: Array of target quotient values to use for each ring ++ * oscillator (RO) for this corner. A value of 0 should be ++ * specified as the target quotient for each RO that is ++ * unused by this corner. ++ * @ro_scale: Array of CPR ring oscillator (RO) scaling factors. The ++ * scaling factor for each RO is defined from RO0 to RO15 ++ * with units of QUOT/V. A value of 0 may be specified for ++ * an RO that is unused. ++ * @ro_mask: Bitmap where each of the 16 LSBs indicate if the ++ * corresponding ROs should be masked for this corner ++ * @irq_en: Bitmap of the CPR interrupts to enable for this corner ++ * @aging_derate: The amount to derate the aging voltage adjustment ++ * determined for the reference corner in units of uV/mV. ++ * E.g. a value of 900 would imply that the adjustment for ++ * this corner should be 90% (900/1000) of that for the ++ * reference corner. ++ * @use_open_loop: Boolean indicating that open-loop (i.e CPR disabled) as ++ * opposed to closed-loop operation must be used for this ++ * corner on CPRh controllers. ++ * @sdelta: The CPR4 controller specific data for this corner. This ++ * field is applicable for CPR4 controllers. ++ * ++ * The value of last_volt is initialized inside of the cpr3_regulator_register() ++ * call with the open_loop_volt value. It can later be updated to the settled ++ * VDD supply voltage. The values for unaged_floor_volt, unaged_ceiling_volt, ++ * and unaged_open_loop_volt are initialized inside of cpr3_regulator_register() ++ * if ctrl->aging_required == true. These three values must be pre-initialized ++ * if cpr3_regulator_register() is called with ctrl->aging_required == false and ++ * ctrl->aging_succeeded == true. ++ * ++ * The values of ro_mask and irq_en are initialized inside of the ++ * cpr3_regulator_register() call. ++ */ ++struct cpr3_corner { ++ int floor_volt; ++ int ceiling_volt; ++ int cold_temp_open_loop_volt; ++ int normal_temp_open_loop_volt; ++ int open_loop_volt; ++ int last_volt; ++ int abs_ceiling_volt; ++ int unaged_floor_volt; ++ int unaged_ceiling_volt; ++ int unaged_open_loop_volt; ++ int system_volt; ++ int mem_acc_volt; ++ u32 proc_freq; ++ int cpr_fuse_corner; ++ u32 target_quot[CPR3_RO_COUNT]; ++ u32 ro_scale[CPR3_RO_COUNT]; ++ u32 ro_mask; ++ u32 irq_en; ++ int aging_derate; ++ bool use_open_loop; ++ struct cpr4_sdelta *sdelta; ++}; ++ ++/** ++ * struct cprh_corner_band - CPRh controller specific data structure which ++ * encapsulates the range of corners and the SDELTA ++ * adjustment table to be applied to the corners within ++ * the min and max bounds of the corner band. ++ * @corner: Corner number which defines the corner band boundary ++ * @sdelta: The SDELTA adjustment table which contains core-count ++ * and temp based margin adjustments that are applicable ++ * to the corner band. ++ */ ++struct cprh_corner_band { ++ int corner; ++ struct cpr4_sdelta *sdelta; ++}; ++ ++/** ++ * struct cpr3_fuse_parameters - CPR4 fuse specific data structure which has ++ * the required fuse parameters need for Close Loop CPR ++ * @(*apss_ro_sel_param)[2]: Pointer to RO select fuse details ++ * @(*apss_init_voltage_param)[2]: Pointer to Target voltage fuse details ++ * @(*apss_target_quot_param)[2]: Pointer to Target quot fuse details ++ * @(*apss_quot_offset_param)[2]: Pointer to quot offset fuse details ++ * @cpr_fusing_rev_param: Pointer to CPR revision fuse details ++ * @apss_speed_bin_param: Pointer to Speed bin fuse details ++ * @cpr_boost_fuse_cfg_param: Pointer to Boost fuse cfg details ++ * @apss_boost_fuse_volt_param: Pointer to Boost fuse volt details ++ * @misc_fuse_volt_adj_param: Pointer to Misc fuse volt fuse details ++ */ ++struct cpr3_fuse_parameters { ++ struct cpr3_fuse_param (*apss_ro_sel_param)[2]; ++ struct cpr3_fuse_param (*apss_init_voltage_param)[2]; ++ struct cpr3_fuse_param (*apss_target_quot_param)[2]; ++ struct cpr3_fuse_param (*apss_quot_offset_param)[2]; ++ struct cpr3_fuse_param *cpr_fusing_rev_param; ++ struct cpr3_fuse_param *apss_speed_bin_param; ++ struct cpr3_fuse_param *cpr_boost_fuse_cfg_param; ++ struct cpr3_fuse_param *apss_boost_fuse_volt_param; ++ struct cpr3_fuse_param *misc_fuse_volt_adj_param; ++}; ++ ++struct cpr4_mem_acc_func { ++ void (*set_mem_acc)(struct regulator_dev *); ++ void (*clear_mem_acc)(struct regulator_dev *); ++}; ++ ++/** ++ * struct cpr4_reg_data - CPR4 regulator specific data structure which is ++ * target specific ++ * @cpr_valid_fuse_count: Number of valid fuse corners ++ * @fuse_ref_volt: Pointer to fuse reference voltage ++ * @fuse_step_volt: CPR step voltage available in fuse ++ * @cpr_clk_rate: CPR clock rate ++ * @boost_fuse_ref_volt: Boost fuse reference voltage ++ * @boost_ceiling_volt: Boost ceiling voltage ++ * @boost_floor_volt: Boost floor voltage ++ * @cpr3_fuse_params: Pointer to CPR fuse parameters ++ * @mem_acc_funcs: Pointer to MEM ACC set/clear functions ++ **/ ++struct cpr4_reg_data { ++ u32 cpr_valid_fuse_count; ++ int *fuse_ref_volt; ++ u32 fuse_step_volt; ++ u32 cpr_clk_rate; ++ int boost_fuse_ref_volt; ++ int boost_ceiling_volt; ++ int boost_floor_volt; ++ struct cpr3_fuse_parameters *cpr3_fuse_params; ++ struct cpr4_mem_acc_func *mem_acc_funcs; ++}; ++/** ++ * struct cpr3_reg_data - CPR3 regulator specific data structure which is ++ * target specific ++ * @cpr_valid_fuse_count: Number of valid fuse corners ++ * @(*init_voltage_param)[2]: Pointer to Target voltage fuse details ++ * @fuse_ref_volt: Pointer to fuse reference voltage ++ * @fuse_step_volt: CPR step voltage available in fuse ++ * @cpr_clk_rate: CPR clock rate ++ * @cpr3_fuse_params: Pointer to CPR fuse parameters ++ **/ ++struct cpr3_reg_data { ++ u32 cpr_valid_fuse_count; ++ struct cpr3_fuse_param (*init_voltage_param)[2]; ++ int *fuse_ref_volt; ++ u32 fuse_step_volt; ++ u32 cpr_clk_rate; ++}; ++ ++/** ++ * struct cpr3_regulator - CPR3 logical regulator instance associated with a ++ * given CPR3 hardware thread ++ * @of_node: Device node associated with the device tree child node ++ * of this CPR3 regulator ++ * @thread: Pointer to the CPR3 thread which manages this CPR3 ++ * regulator ++ * @name: Unique name for this CPR3 regulator which is filled ++ * using the device tree regulator-name property ++ * @rdesc: Regulator description for this CPR3 regulator ++ * @rdev: Regulator device pointer for the regulator registered ++ * for this CPR3 regulator ++ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used ++ * to manage memory circuitry settings based upon CPR3 ++ * regulator output voltage. ++ * @corner: Array of all corners supported by this CPR3 regulator ++ * @corner_count: The number of elements in the corner array ++ * @corner_band: Array of all corner bands supported by CPRh compatible ++ * controllers ++ * @cpr4_regulator_data Target specific cpr4 regulator data ++ * @cpr3_regulator_data Target specific cpr3 regulator data ++ * @corner_band_count: The number of elements in the corner band array ++ * @platform_fuses: Pointer to platform specific CPR fuse data (only used by ++ * platform specific CPR3 driver) ++ * @speed_bin_fuse: Value read from the speed bin fuse parameter ++ * @speed_bins_supported: The number of speed bins supported by the device tree ++ * configuration for this CPR3 regulator ++ * @cpr_rev_fuse: Value read from the CPR fusing revision fuse parameter ++ * @fuse_combo: Platform specific enum value identifying the specific ++ * combination of fuse values found on a given chip ++ * @fuse_combos_supported: The number of fuse combinations supported by the ++ * device tree configuration for this CPR3 regulator ++ * @fuse_corner_count: Number of corners defined by fuse parameters ++ * @fuse_corner_map: Array of length fuse_corner_count which specifies the ++ * highest corner associated with each fuse corner. Note ++ * that each element must correspond to a valid corner ++ * and that element values must be strictly increasing. ++ * Also, it is acceptable for the lowest fuse corner to map ++ * to a corner other than the lowest. Likewise, it is ++ * acceptable for the highest fuse corner to map to a ++ * corner other than the highest. ++ * @fuse_combo_corner_sum: The sum of the corner counts across all fuse combos ++ * @fuse_combo_offset: The device tree property array offset for the selected ++ * fuse combo ++ * @speed_bin_corner_sum: The sum of the corner counts across all speed bins ++ * This may be specified as 0 if per speed bin parsing ++ * support is not required. ++ * @speed_bin_offset: The device tree property array offset for the selected ++ * speed bin ++ * @fuse_combo_corner_band_sum: The sum of the corner band counts across all ++ * fuse combos ++ * @fuse_combo_corner_band_offset: The device tree property array offset for ++ * the corner band count corresponding to the selected ++ * fuse combo ++ * @speed_bin_corner_band_sum: The sum of the corner band counts across all ++ * speed bins. This may be specified as 0 if per speed bin ++ * parsing support is not required ++ * @speed_bin_corner_band_offset: The device tree property array offset for the ++ * corner band count corresponding to the selected speed ++ * bin ++ * @pd_bypass_mask: Bit mask of power domains associated with this CPR3 ++ * regulator ++ * @dynamic_floor_corner: Index identifying the voltage corner for the CPR3 ++ * regulator whose last_volt value should be used as the ++ * global CPR floor voltage if all of the power domains ++ * associated with this CPR3 regulator are bypassed ++ * @uses_dynamic_floor: Boolean flag indicating that dynamic_floor_corner should ++ * be utilized for the CPR3 regulator ++ * @current_corner: Index identifying the currently selected voltage corner ++ * for the CPR3 regulator or less than 0 if no corner has ++ * been requested ++ * @last_closed_loop_corner: Index identifying the last voltage corner for the ++ * CPR3 regulator which was configured when operating in ++ * CPR closed-loop mode or less than 0 if no corner has ++ * been requested. CPR registers are only written to when ++ * using closed-loop mode. ++ * @aggregated: Boolean flag indicating that this CPR3 regulator ++ * participated in the last aggregation event ++ * @debug_corner: Index identifying voltage corner used for displaying ++ * corner configuration values in debugfs ++ * @vreg_enabled: Boolean defining the enable state of the CPR3 ++ * regulator's regulator within the regulator framework. ++ * @aging_allowed: Boolean defining if CPR aging adjustments are allowed ++ * for this CPR3 regulator given the fuse combo of the ++ * device ++ * @aging_allow_open_loop_adj: Boolean defining if the open-loop voltage of each ++ * corner of this regulator should be adjusted as a result ++ * of an aging measurement. This flag can be set to false ++ * when the open-loop voltage adjustments have been ++ * specified such that they include the maximum possible ++ * aging adjustment. This flag is only used if ++ * aging_allowed == true. ++ * @aging_corner: The corner that should be configured for this regulator ++ * when an aging measurement is performed. ++ * @aging_max_adjust_volt: The maximum aging voltage margin in microvolts that ++ * may be added to the target quotients of this regulator. ++ * A value of 0 may be specified if this regulator does not ++ * require any aging adjustment. ++ * @allow_core_count_adj: Core count adjustments are allowed for this regulator. ++ * @allow_temp_adj: Temperature based adjustments are allowed for this ++ * regulator. ++ * @max_core_count: Maximum number of cores considered for core count ++ * adjustment logic. ++ * @allow_boost: Voltage boost allowed for this regulator. ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements current_corner, last_closed_loop_corner, aggregated, debug_corner, ++ * and vreg_enabled are state variables. ++ */ ++struct cpr3_regulator { ++ struct device_node *of_node; ++ struct cpr3_thread *thread; ++ const char *name; ++ struct regulator_desc rdesc; ++ struct regulator_dev *rdev; ++ struct regulator *mem_acc_regulator; ++ struct cpr3_corner *corner; ++ int corner_count; ++ struct cprh_corner_band *corner_band; ++ struct cpr4_reg_data *cpr4_regulator_data; ++ struct cpr3_reg_data *cpr3_regulator_data; ++ u32 corner_band_count; ++ ++ void *platform_fuses; ++ int speed_bin_fuse; ++ int speed_bins_supported; ++ int cpr_rev_fuse; ++ int part_type; ++ int part_type_supported; ++ int fuse_combo; ++ int fuse_combos_supported; ++ int fuse_corner_count; ++ int *fuse_corner_map; ++ int fuse_combo_corner_sum; ++ int fuse_combo_offset; ++ int speed_bin_corner_sum; ++ int speed_bin_offset; ++ int fuse_combo_corner_band_sum; ++ int fuse_combo_corner_band_offset; ++ int speed_bin_corner_band_sum; ++ int speed_bin_corner_band_offset; ++ u32 pd_bypass_mask; ++ int dynamic_floor_corner; ++ bool uses_dynamic_floor; ++ ++ int current_corner; ++ int last_closed_loop_corner; ++ bool aggregated; ++ int debug_corner; ++ bool vreg_enabled; ++ ++ bool aging_allowed; ++ bool aging_allow_open_loop_adj; ++ int aging_corner; ++ int aging_max_adjust_volt; ++ ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ int max_core_count; ++ bool allow_boost; ++}; ++ ++/** ++ * struct cpr3_thread - CPR3 hardware thread data structure ++ * @thread_id: Hardware thread ID ++ * @of_node: Device node associated with the device tree child node ++ * of this CPR3 thread ++ * @ctrl: Pointer to the CPR3 controller which manages this thread ++ * @vreg: Array of CPR3 regulators handled by the CPR3 thread ++ * @vreg_count: Number of elements in the vreg array ++ * @aggr_corner: CPR corner containing the in process aggregated voltage ++ * and target quotient configurations which will be applied ++ * @last_closed_loop_aggr_corner: CPR corner containing the most recent ++ * configurations which were written into hardware ++ * registers when operating in closed loop mode (i.e. with ++ * CPR enabled) ++ * @consecutive_up: The number of consecutive CPR step up events needed to ++ * to trigger an up interrupt ++ * @consecutive_down: The number of consecutive CPR step down events needed to ++ * to trigger a down interrupt ++ * @up_threshold: The number CPR error steps required to generate an up ++ * event ++ * @down_threshold: The number CPR error steps required to generate a down ++ * event ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements aggr_corner and last_closed_loop_aggr_corner are state variables. ++ */ ++struct cpr3_thread { ++ u32 thread_id; ++ struct device_node *of_node; ++ struct cpr3_controller *ctrl; ++ struct cpr3_regulator *vreg; ++ int vreg_count; ++ struct cpr3_corner aggr_corner; ++ struct cpr3_corner last_closed_loop_aggr_corner; ++ ++ u32 consecutive_up; ++ u32 consecutive_down; ++ u32 up_threshold; ++ u32 down_threshold; ++}; ++ ++/* Per CPR controller data */ ++/** ++ * enum cpr3_mem_acc_corners - Constants which define the number of mem-acc ++ * regulator corners available in the mem-acc corner map array. ++ * %CPR3_MEM_ACC_LOW_CORNER: Index in mem-acc corner map array mapping to the ++ * mem-acc regulator corner ++ * to be used for low voltage vdd supply ++ * %CPR3_MEM_ACC_HIGH_CORNER: Index in mem-acc corner map array mapping to the ++ * mem-acc regulator corner to be used for high ++ * voltage vdd supply ++ * %CPR3_MEM_ACC_CORNERS: Number of elements in the mem-acc corner map ++ * array ++ */ ++enum cpr3_mem_acc_corners { ++ CPR3_MEM_ACC_LOW_CORNER = 0, ++ CPR3_MEM_ACC_HIGH_CORNER = 1, ++ CPR3_MEM_ACC_CORNERS = 2, ++}; ++ ++/** ++ * enum cpr3_count_mode - CPR3 controller count mode which defines the ++ * method that CPR sensor data is acquired ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MIN: Capture all CPR sensor readings ++ * simultaneously and report the minimum ++ * value seen in successive measurements ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MAX: Capture all CPR sensor readings ++ * simultaneously and report the maximum ++ * value seen in successive measurements ++ * %CPR3_COUNT_MODE_STAGGERED: Read one sensor at a time in a ++ * sequential fashion ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_AGE: Capture all CPR aging sensor readings ++ * simultaneously. ++ */ ++enum cpr3_count_mode { ++ CPR3_COUNT_MODE_ALL_AT_ONCE_MIN = 0, ++ CPR3_COUNT_MODE_ALL_AT_ONCE_MAX = 1, ++ CPR3_COUNT_MODE_STAGGERED = 2, ++ CPR3_COUNT_MODE_ALL_AT_ONCE_AGE = 3, ++}; ++ ++/** ++ * enum cpr_controller_type - supported CPR controller hardware types ++ * %CPR_CTRL_TYPE_CPR3: HW has CPR3 controller ++ * %CPR_CTRL_TYPE_CPR4: HW has CPR4 controller ++ */ ++enum cpr_controller_type { ++ CPR_CTRL_TYPE_CPR3, ++ CPR_CTRL_TYPE_CPR4, ++}; ++ ++/** ++ * cpr_setting - supported CPR global settings ++ * %CPR_DEFAULT: default mode from dts will be used ++ * %CPR_DISABLED: ceiling voltage will be used for all the corners ++ * %CPR_OPEN_LOOP_EN: CPR will work in OL ++ * %CPR_CLOSED_LOOP_EN: CPR will work in CL, if supported ++ */ ++enum cpr_setting { ++ CPR_DEFAULT = 0, ++ CPR_DISABLED = 1, ++ CPR_OPEN_LOOP_EN = 2, ++ CPR_CLOSED_LOOP_EN = 3, ++}; ++ ++/** ++ * struct cpr3_aging_sensor_info - CPR3 aging sensor information ++ * @sensor_id The index of the CPR3 sensor to be used in the aging ++ * measurement. ++ * @ro_scale The CPR ring oscillator (RO) scaling factor for the ++ * aging sensor with units of QUOT/V. ++ * @init_quot_diff: The fused quotient difference between aged and un-aged ++ * paths that was measured at manufacturing time. ++ * @measured_quot_diff: The quotient difference measured at runtime. ++ * @bypass_mask: Bit mask of the CPR sensors that must be bypassed during ++ * the aging measurement for this sensor ++ * ++ * This structure contains both configuration and runtime state data. The ++ * element measured_quot_diff is a state variable. ++ */ ++struct cpr3_aging_sensor_info { ++ u32 sensor_id; ++ u32 ro_scale; ++ int init_quot_diff; ++ int measured_quot_diff; ++ u32 bypass_mask[CPR3_MAX_SENSOR_COUNT / 32]; ++}; ++ ++/** ++ * struct cpr3_reg_info - Register information data structure ++ * @name: Register name ++ * @addr: Register physical address ++ * @value: Register content ++ * @virt_addr: Register virtual address ++ * ++ * This data structure is used to dump some critical register contents ++ * when the device crashes due to a kernel panic. ++ */ ++struct cpr3_reg_info { ++ const char *name; ++ u32 addr; ++ u32 value; ++ void __iomem *virt_addr; ++}; ++ ++/** ++ * struct cpr3_panic_regs_info - Data structure to dump critical register ++ * contents. ++ * @reg_count: Number of elements in the regs array ++ * @regs: Array of critical registers information ++ * ++ * This data structure is used to dump critical register contents when ++ * the device crashes due to a kernel panic. ++ */ ++struct cpr3_panic_regs_info { ++ int reg_count; ++ struct cpr3_reg_info *regs; ++}; ++ ++/** ++ * struct cpr3_controller - CPR3 controller data structure ++ * @dev: Device pointer for the CPR3 controller device ++ * @name: Unique name for the CPR3 controller ++ * @ctrl_id: Controller ID corresponding to the VDD supply number ++ * that this CPR3 controller manages. ++ * @cpr_ctrl_base: Virtual address of the CPR3 controller base register ++ * @fuse_base: Virtual address of fuse row 0 ++ * @aging_possible_reg: Virtual address of an optional platform-specific ++ * register that must be ready to determine if it is ++ * possible to perform an aging measurement. ++ * @list: list head used in a global cpr3-regulator list so that ++ * cpr3-regulator structs can be found easily in RAM dumps ++ * @thread: Array of CPR3 threads managed by the CPR3 controller ++ * @thread_count: Number of elements in the thread array ++ * @sensor_owner: Array of thread IDs indicating which thread owns a given ++ * CPR sensor ++ * @sensor_count: The number of CPR sensors found on the CPR loop managed ++ * by this CPR controller. Must be equal to the number of ++ * elements in the sensor_owner array ++ * @soc_revision: Revision number of the SoC. This may be unused by ++ * platforms that do not have different behavior for ++ * different SoC revisions. ++ * @lock: Mutex lock used to ensure mutual exclusion between ++ * all of the threads associated with the controller ++ * @vdd_regulator: Pointer to the VDD supply regulator which this CPR3 ++ * controller manages ++ * @system_regulator: Pointer to the optional system-supply regulator upon ++ * which the VDD supply regulator depends. ++ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used ++ * to manage memory circuitry settings based upon the ++ * VDD supply output voltage. ++ * @vdd_limit_regulator: Pointer to the VDD supply limit regulator which is used ++ * for hardware closed-loop in order specify ceiling and ++ * floor voltage limits (platform specific) ++ * @system_supply_max_volt: Voltage in microvolts which corresponds to the ++ * absolute ceiling voltage of the system-supply ++ * @mem_acc_threshold_volt: mem-acc threshold voltage in microvolts ++ * @mem_acc_corner_map: mem-acc regulator corners mapping to low and high ++ * voltage mem-acc settings for the memories powered by ++ * this CPR3 controller and its associated CPR3 regulators ++ * @mem_acc_crossover_volt: Voltage in microvolts corresponding to the voltage ++ * that the VDD supply must be set to while a MEM ACC ++ * switch is in progress. This element must be initialized ++ * for CPRh controllers when a MEM ACC threshold voltage is ++ * defined. ++ * @core_clk: Pointer to the CPR3 controller core clock ++ * @iface_clk: Pointer to the CPR3 interface clock (platform specific) ++ * @bus_clk: Pointer to the CPR3 bus clock (platform specific) ++ * @irq: CPR interrupt number ++ * @irq_affinity_mask: The cpumask for the CPUs which the CPR interrupt should ++ * have affinity for ++ * @cpu_hotplug_notifier: CPU hotplug notifier used to reset IRQ affinity when a ++ * CPU is brought back online ++ * @ceiling_irq: Interrupt number for the interrupt that is triggered ++ * when hardware closed-loop attempts to exceed the ceiling ++ * voltage ++ * @apm: Handle to the array power mux (APM) ++ * @apm_threshold_volt: Voltage in microvolts which defines the threshold ++ * voltage to determine the APM supply selection for ++ * each corner ++ * @apm_crossover_volt: Voltage in microvolts corresponding to the voltage that ++ * the VDD supply must be set to while an APM switch is in ++ * progress. This element must be initialized for CPRh ++ * controllers when an APM threshold voltage is defined ++ * @apm_adj_volt: Minimum difference between APM threshold voltage and ++ * open-loop voltage which allows the APM threshold voltage ++ * to be used as a ceiling ++ * @apm_high_supply: APM supply to configure if VDD voltage is greater than ++ * or equal to the APM threshold voltage ++ * @apm_low_supply: APM supply to configure if the VDD voltage is less than ++ * the APM threshold voltage ++ * @base_volt: Minimum voltage in microvolts supported by the VDD ++ * supply managed by this CPR controller ++ * @corner_switch_delay_time: The delay time in nanoseconds used by the CPR ++ * controller to wait for voltage settling before ++ * acknowledging the OSM block after corner changes ++ * @cpr_clock_rate: CPR reference clock frequency in Hz. ++ * @sensor_time: The time in nanoseconds that each sensor takes to ++ * perform a measurement. ++ * @loop_time: The time in nanoseconds between consecutive CPR ++ * measurements. ++ * @up_down_delay_time: The time to delay in nanoseconds between consecutive CPR ++ * measurements when the last measurement recommended ++ * increasing or decreasing the vdd-supply voltage. ++ * (platform specific) ++ * @idle_clocks: Number of CPR reference clock ticks that the CPR ++ * controller waits in transitional states. ++ * @step_quot_init_min: The default minimum CPR step quotient value. The step ++ * quotient is the number of additional ring oscillator ++ * ticks observed when increasing one step in vdd-supply ++ * output voltage. ++ * @step_quot_init_max: The default maximum CPR step quotient value. ++ * @step_volt: Step size in microvolts between available set points ++ * of the VDD supply ++ * @down_error_step_limit: CPR4 hardware closed-loop down error step limit which ++ * defines the maximum number of VDD supply regulator steps ++ * that the voltage may be reduced as the result of a ++ * single CPR measurement. ++ * @up_error_step_limit: CPR4 hardware closed-loop up error step limit which ++ * defines the maximum number of VDD supply regulator steps ++ * that the voltage may be increased as the result of a ++ * single CPR measurement. ++ * @count_mode: CPR controller count mode ++ * @count_repeat: Number of times to perform consecutive sensor ++ * measurements when using all-at-once count modes. ++ * @proc_clock_throttle: Defines the processor clock frequency throttling ++ * register value to use. This can be used to reduce the ++ * clock frequency when a power domain exits a low power ++ * mode until CPR settles at a new voltage. ++ * (platform specific) ++ * @cpr_allowed_hw: Boolean which indicates if closed-loop CPR operation is ++ * permitted for a given chip based upon hardware fuse ++ * values ++ * @cpr_allowed_sw: Boolean which indicates if closed-loop CPR operation is ++ * permitted based upon software policies ++ * @supports_hw_closed_loop: Boolean which indicates if this CPR3/4 controller ++ * physically supports hardware closed-loop CPR operation ++ * @use_hw_closed_loop: Boolean which indicates that this controller will be ++ * using hardware closed-loop operation in place of ++ * software closed-loop operation. ++ * @ctrl_type: CPR controller type ++ * @saw_use_unit_mV: Boolean which indicates the unit used in SAW PVC ++ * interface is mV. ++ * @aggr_corner: CPR corner containing the most recently aggregated ++ * voltage configurations which are being used currently ++ * @cpr_enabled: Boolean which indicates that the CPR controller is ++ * enabled and operating in closed-loop mode. CPR clocks ++ * have been prepared and enabled whenever this flag is ++ * true. ++ * @last_corner_was_closed_loop: Boolean indicating if the last known corners ++ * were updated during closed loop operation. ++ * @cpr_suspended: Boolean which indicates that CPR has been temporarily ++ * disabled while enterring system suspend. ++ * @debugfs: Pointer to the debugfs directory of this CPR3 controller ++ * @aging_ref_volt: Reference voltage in microvolts to configure when ++ * performing CPR aging measurements. ++ * @aging_vdd_mode: vdd-supply regulator mode to configure before performing ++ * a CPR aging measurement. It should be one of ++ * REGULATOR_MODE_*. ++ * @aging_complete_vdd_mode: vdd-supply regulator mode to configure after ++ * performing a CPR aging measurement. It should be one of ++ * REGULATOR_MODE_*. ++ * @aging_ref_adjust_volt: The reference aging voltage margin in microvolts that ++ * should be added to the target quotients of the ++ * regulators managed by this controller after derating. ++ * @aging_required: Flag which indicates that a CPR aging measurement still ++ * needs to be performed for this CPR3 controller. ++ * @aging_succeeded: Flag which indicates that a CPR aging measurement has ++ * completed successfully. ++ * @aging_failed: Flag which indicates that a CPR aging measurement has ++ * failed to complete successfully. ++ * @aging_sensor: Array of CPR3 aging sensors which are used to perform ++ * aging measurements at a runtime. ++ * @aging_sensor_count: Number of elements in the aging_sensor array ++ * @aging_possible_mask: Optional bitmask used to mask off the ++ * aging_possible_reg register. ++ * @aging_possible_val: Optional value that the masked aging_possible_reg ++ * register must have in order for a CPR aging measurement ++ * to be possible. ++ * @step_quot_fixed: Fixed step quotient value used for target quotient ++ * adjustment if use_dynamic_step_quot is not set. ++ * This parameter is only relevant for CPR4 controllers ++ * when using the per-online-core or per-temperature ++ * adjustments. ++ * @initial_temp_band: Temperature band used for calculation of base-line ++ * target quotients (fused). ++ * @use_dynamic_step_quot: Boolean value which indicates that margin adjustment ++ * of target quotient will be based on the step quotient ++ * calculated dynamically in hardware for each RO. ++ * @allow_core_count_adj: Core count adjustments are allowed for this controller ++ * @allow_temp_adj: Temperature based adjustments are allowed for ++ * this controller ++ * @allow_boost: Voltage boost allowed for this controller. ++ * @temp_band_count: Number of temperature bands used for temperature based ++ * adjustment logic ++ * @temp_points: Array of temperature points in decidegrees Celsius used ++ * to specify the ranges for selected temperature bands. ++ * The array must have (temp_band_count - 1) elements ++ * allocated. ++ * @temp_sensor_id_start: Start ID of temperature sensors used for temperature ++ * based adjustments. ++ * @temp_sensor_id_end: End ID of temperature sensors used for temperature ++ * based adjustments. ++ * @voltage_settling_time: The time in nanoseconds that it takes for the ++ * VDD supply voltage to settle after being increased or ++ * decreased by step_volt microvolts which is used when ++ * SDELTA voltage margin adjustments are applied. ++ * @cpr_global_setting: Global setting for this CPR controller ++ * @panic_regs_info: Array of panic registers information which provides the ++ * list of registers to dump when the device crashes. ++ * @panic_notifier: Notifier block registered to global panic notifier list. ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements cpr_allowed_sw, use_hw_closed_loop, aggr_corner, cpr_enabled, ++ * last_corner_was_closed_loop, cpr_suspended, aging_ref_adjust_volt, ++ * aging_required, aging_succeeded, and aging_failed are state variables. ++ * ++ * The apm* elements do not need to be initialized if the VDD supply managed by ++ * the CPR3 controller does not utilize an APM. ++ * ++ * The elements step_quot_fixed, initial_temp_band, allow_core_count_adj, ++ * allow_temp_adj and temp* need to be initialized for CPR4 controllers which ++ * are using per-online-core or per-temperature adjustments. ++ */ ++struct cpr3_controller { ++ struct device *dev; ++ const char *name; ++ int ctrl_id; ++ void __iomem *cpr_ctrl_base; ++ void __iomem *fuse_base; ++ void __iomem *aging_possible_reg; ++ struct list_head list; ++ struct cpr3_thread *thread; ++ int thread_count; ++ u8 *sensor_owner; ++ int sensor_count; ++ int soc_revision; ++ struct mutex lock; ++ struct regulator *vdd_regulator; ++ struct regulator *system_regulator; ++ struct regulator *mem_acc_regulator; ++ struct regulator *vdd_limit_regulator; ++ int system_supply_max_volt; ++ int mem_acc_threshold_volt; ++ int mem_acc_corner_map[CPR3_MEM_ACC_CORNERS]; ++ int mem_acc_crossover_volt; ++ struct clk *core_clk; ++ struct clk *iface_clk; ++ struct clk *bus_clk; ++ int irq; ++ struct cpumask irq_affinity_mask; ++ struct notifier_block cpu_hotplug_notifier; ++ int ceiling_irq; ++ struct msm_apm_ctrl_dev *apm; ++ int apm_threshold_volt; ++ int apm_crossover_volt; ++ int apm_adj_volt; ++ enum msm_apm_supply apm_high_supply; ++ enum msm_apm_supply apm_low_supply; ++ int base_volt; ++ u32 corner_switch_delay_time; ++ u32 cpr_clock_rate; ++ u32 sensor_time; ++ u32 loop_time; ++ u32 up_down_delay_time; ++ u32 idle_clocks; ++ u32 step_quot_init_min; ++ u32 step_quot_init_max; ++ int step_volt; ++ u32 down_error_step_limit; ++ u32 up_error_step_limit; ++ enum cpr3_count_mode count_mode; ++ u32 count_repeat; ++ u32 proc_clock_throttle; ++ bool cpr_allowed_hw; ++ bool cpr_allowed_sw; ++ bool supports_hw_closed_loop; ++ bool use_hw_closed_loop; ++ enum cpr_controller_type ctrl_type; ++ bool saw_use_unit_mV; ++ struct cpr3_corner aggr_corner; ++ bool cpr_enabled; ++ bool last_corner_was_closed_loop; ++ bool cpr_suspended; ++ struct dentry *debugfs; ++ ++ int aging_ref_volt; ++ unsigned int aging_vdd_mode; ++ unsigned int aging_complete_vdd_mode; ++ int aging_ref_adjust_volt; ++ bool aging_required; ++ bool aging_succeeded; ++ bool aging_failed; ++ struct cpr3_aging_sensor_info *aging_sensor; ++ int aging_sensor_count; ++ u32 cur_sensor_state; ++ u32 aging_possible_mask; ++ u32 aging_possible_val; ++ ++ u32 step_quot_fixed; ++ u32 initial_temp_band; ++ bool use_dynamic_step_quot; ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ bool allow_boost; ++ int temp_band_count; ++ int *temp_points; ++ u32 temp_sensor_id_start; ++ u32 temp_sensor_id_end; ++ u32 voltage_settling_time; ++ enum cpr_setting cpr_global_setting; ++ struct cpr3_panic_regs_info *panic_regs_info; ++ struct notifier_block panic_notifier; ++}; ++ ++/* Used for rounding voltages to the closest physically available set point. */ ++#define CPR3_ROUND(n, d) (DIV_ROUND_UP(n, d) * (d)) ++ ++#define cpr3_err(cpr3_thread, message, ...) \ ++ pr_err("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++#define cpr3_info(cpr3_thread, message, ...) \ ++ pr_info("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++#define cpr3_debug(cpr3_thread, message, ...) \ ++ pr_debug("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++ ++/* ++ * Offset subtracted from voltage corner values passed in from the regulator ++ * framework in order to get internal voltage corner values. This is needed ++ * since the regulator framework treats 0 as an error value at regulator ++ * registration time. ++ */ ++#define CPR3_CORNER_OFFSET 1 ++ ++#ifdef CONFIG_REGULATOR_CPR3 ++ ++int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++int cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++int cpr3_regulator_unregister(struct cpr3_controller *ctrl); ++int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl); ++int cpr3_regulator_suspend(struct cpr3_controller *ctrl); ++int cpr3_regulator_resume(struct cpr3_controller *ctrl); ++ ++int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id, ++ u32 max_thread_id); ++int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev); ++int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end); ++int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value); ++int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse, ++ int fuse_len); ++u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x); ++int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg); ++int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max); ++int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max); ++int cpr3_parse_common_thread_data(struct cpr3_thread *thread); ++int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl); ++int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl); ++int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg); ++void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg); ++int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg); ++void cpr3_print_quots(struct cpr3_regulator *vreg); ++int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt); ++int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt); ++int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg, ++ int *fuse_volt); ++int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg); ++int cpr3_quot_adjustment(int ro_scale, int volt_adjust); ++int cpr3_voltage_adjustment(int ro_scale, int quot_adjust); ++int cpr3_parse_closed_loop_voltage_adjustments(struct cpr3_regulator *vreg, ++ u64 *ro_sel, int *volt_adjust, ++ int *volt_adjust_fuse, int *ro_scale); ++int cpr4_parse_core_count_temp_voltage_adj(struct cpr3_regulator *vreg, ++ bool use_corner_band); ++int cpr3_apm_init(struct cpr3_controller *ctrl); ++int cpr3_mem_acc_init(struct cpr3_regulator *vreg); ++void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg); ++void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg); ++int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust); ++int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold); ++int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp); ++bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg); ++ ++#else ++ ++static inline int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int ++cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int ++cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_suspend(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_resume(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_get_thread_name(struct cpr3_thread *thread, ++ struct device_node *thread_node) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_allocate_threads(struct cpr3_controller *ctrl, ++ u32 min_thread_id, u32 max_thread_id) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end) ++{ ++ return 0; ++} ++ ++static inline int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_convert_open_loop_voltage_fuse(int ref_volt, ++ int step_volt, u32 fuse, int fuse_len) ++{ ++ return -EPERM; ++} ++ ++static inline u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x) ++{ ++ return 0; ++} ++ ++static inline int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_corner_band_array_property( ++ struct cpr3_regulator *vreg, const char *prop_name, ++ int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_thread_u32(struct cpr3_thread *thread, ++ const char *propname, u32 *out_value, u32 value_min, ++ u32 value_max) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, ++ const char *propname, u32 *out_value, u32 value_min, ++ u32 value_max) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_thread_data(struct cpr3_thread *thread) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ return -EPERM; ++} ++ ++static inline int ++cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline void cpr3_open_loop_voltage_as_ceiling( ++ struct cpr3_regulator *vreg) ++{ ++ return; ++} ++ ++static inline int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline void cpr3_print_quots(struct cpr3_regulator *vreg) ++{ ++ return; ++} ++ ++static inline int ++cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int ++cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_adjust_fused_open_loop_voltages( ++ struct cpr3_regulator *vreg, int *fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_quot_adjustment(int ro_scale, int volt_adjust) ++{ ++ return 0; ++} ++ ++static inline int cpr3_voltage_adjustment(int ro_scale, int quot_adjust) ++{ ++ return 0; ++} ++ ++static inline int cpr3_parse_closed_loop_voltage_adjustments( ++ struct cpr3_regulator *vreg, u64 *ro_sel, ++ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale) ++{ ++ return 0; ++} ++ ++static inline int cpr4_parse_core_count_temp_voltage_adj( ++ struct cpr3_regulator *vreg, bool use_corner_band) ++{ ++ return 0; ++} ++ ++static inline int cpr3_apm_init(struct cpr3_controller *ctrl) ++{ ++ return 0; ++} ++ ++static inline int cpr3_mem_acc_init(struct cpr3_regulator *vreg) ++{ ++ return 0; ++} ++ ++static inline void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg) ++{ ++} ++ ++static inline void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg) ++{ ++} ++ ++static inline int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust) ++{ ++ return 0; ++} ++ ++static inline int ++cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold) ++{ ++ return 0; ++} ++ ++static inline bool ++cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg) ++{ ++ return false; ++} ++ ++static inline int ++cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp) ++{ ++ return 0; ++} ++#endif /* CONFIG_REGULATOR_CPR3 */ ++ ++#endif /* __REGULATOR_CPR_REGULATOR_H__ */ +--- /dev/null ++++ b/drivers/regulator/cpr3-util.c +@@ -0,0 +1,2750 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++/* ++ * This file contains utility functions to be used by platform specific CPR3 ++ * regulator drivers. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include <linux/cpumask.h> ++#include <linux/device.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/types.h> ++ ++#include <soc/qcom/socinfo.h> ++ ++#include "cpr3-regulator.h" ++ ++#define BYTES_PER_FUSE_ROW 8 ++#define MAX_FUSE_ROW_BIT 63 ++ ++#define CPR3_CONSECUTIVE_UP_DOWN_MIN 0 ++#define CPR3_CONSECUTIVE_UP_DOWN_MAX 15 ++#define CPR3_UP_DOWN_THRESHOLD_MIN 0 ++#define CPR3_UP_DOWN_THRESHOLD_MAX 31 ++#define CPR3_STEP_QUOT_MIN 0 ++#define CPR3_STEP_QUOT_MAX 63 ++#define CPR3_IDLE_CLOCKS_MIN 0 ++#define CPR3_IDLE_CLOCKS_MAX 31 ++ ++/* This constant has units of uV/mV so 1000 corresponds to 100%. */ ++#define CPR3_AGING_DERATE_UNITY 1000 ++ ++/** ++ * cpr3_allocate_regulators() - allocate and initialize CPR3 regulators for a ++ * given thread based upon device tree data ++ * @thread: Pointer to the CPR3 thread ++ * ++ * This function allocates the thread->vreg array based upon the number of ++ * device tree regulator subnodes. It also initializes generic elements of each ++ * regulator struct such as name, of_node, and thread. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_allocate_regulators(struct cpr3_thread *thread) ++{ ++ struct device_node *node; ++ int i, rc; ++ ++ thread->vreg_count = 0; ++ ++ for_each_available_child_of_node(thread->of_node, node) { ++ thread->vreg_count++; ++ } ++ ++ thread->vreg = devm_kcalloc(thread->ctrl->dev, thread->vreg_count, ++ sizeof(*thread->vreg), GFP_KERNEL); ++ if (!thread->vreg) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_available_child_of_node(thread->of_node, node) { ++ thread->vreg[i].of_node = node; ++ thread->vreg[i].thread = thread; ++ ++ rc = of_property_read_string(node, "regulator-name", ++ &thread->vreg[i].name); ++ if (rc) { ++ dev_err(thread->ctrl->dev, "could not find regulator name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ i++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_allocate_threads() - allocate and initialize CPR3 threads for a given ++ * controller based upon device tree data ++ * @ctrl: Pointer to the CPR3 controller ++ * @min_thread_id: Minimum allowed hardware thread ID for this controller ++ * @max_thread_id: Maximum allowed hardware thread ID for this controller ++ * ++ * This function allocates the ctrl->thread array based upon the number of ++ * device tree thread subnodes. It also initializes generic elements of each ++ * thread struct such as thread_id, of_node, ctrl, and vreg array. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id, ++ u32 max_thread_id) ++{ ++ struct device *dev = ctrl->dev; ++ struct device_node *thread_node; ++ int i, j, rc; ++ ++ ctrl->thread_count = 0; ++ ++ for_each_available_child_of_node(dev->of_node, thread_node) { ++ ctrl->thread_count++; ++ } ++ ++ ctrl->thread = devm_kcalloc(dev, ctrl->thread_count, ++ sizeof(*ctrl->thread), GFP_KERNEL); ++ if (!ctrl->thread) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_available_child_of_node(dev->of_node, thread_node) { ++ ctrl->thread[i].of_node = thread_node; ++ ctrl->thread[i].ctrl = ctrl; ++ ++ rc = of_property_read_u32(thread_node, "qcom,cpr-thread-id", ++ &ctrl->thread[i].thread_id); ++ if (rc) { ++ dev_err(dev, "could not read DT property qcom,cpr-thread-id, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread[i].thread_id < min_thread_id || ++ ctrl->thread[i].thread_id > max_thread_id) { ++ dev_err(dev, "invalid thread id = %u; not within [%u, %u]\n", ++ ctrl->thread[i].thread_id, min_thread_id, ++ max_thread_id); ++ return -EINVAL; ++ } ++ ++ /* Verify that the thread ID is unique for all child nodes. */ ++ for (j = 0; j < i; j++) { ++ if (ctrl->thread[j].thread_id ++ == ctrl->thread[i].thread_id) { ++ dev_err(dev, "duplicate thread id = %u found\n", ++ ctrl->thread[i].thread_id); ++ return -EINVAL; ++ } ++ } ++ ++ rc = cpr3_allocate_regulators(&ctrl->thread[i]); ++ if (rc) ++ return rc; ++ ++ i++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_map_fuse_base() - ioremap the base address of the fuse region ++ * @ctrl: Pointer to the CPR3 controller ++ * @pdev: Platform device pointer for the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fuse_base"); ++ if (!res || !res->start) { ++ dev_err(&pdev->dev, "fuse base address is missing\n"); ++ return -ENXIO; ++ } ++ ++ ctrl->fuse_base = devm_ioremap(&pdev->dev, res->start, ++ resource_size(res)); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_read_tcsr_setting - reads the CPR setting bits from TCSR register ++ * @ctrl: Pointer to the CPR3 controller ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @start: start bit in TCSR register ++ * @end: end bit in TCSR register ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end) ++{ ++ struct resource *res; ++ void __iomem *tcsr_reg; ++ u32 val; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "cpr_tcsr_reg"); ++ if (!res || !res->start) ++ return 0; ++ ++ tcsr_reg = ioremap(res->start, resource_size(res)); ++ if (!tcsr_reg) { ++ dev_err(&pdev->dev, "tcsr ioremap failed\n"); ++ return 0; ++ } ++ ++ val = readl_relaxed(tcsr_reg); ++ val &= GENMASK(end, start); ++ val >>= start; ++ ++ switch (val) { ++ case 1: ++ ctrl->cpr_global_setting = CPR_DISABLED; ++ break; ++ case 2: ++ ctrl->cpr_global_setting = CPR_OPEN_LOOP_EN; ++ break; ++ case 3: ++ ctrl->cpr_global_setting = CPR_CLOSED_LOOP_EN; ++ break; ++ default: ++ ctrl->cpr_global_setting = CPR_DEFAULT; ++ } ++ ++ iounmap(tcsr_reg); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_read_fuse_param() - reads a CPR3 fuse parameter out of eFuses ++ * @fuse_base_addr: Virtual memory address of the eFuse base address ++ * @param: Null terminated array of fuse param segments to read ++ * from ++ * @param_value: Output with value read from the eFuses ++ * ++ * This function reads from each of the parameter segments listed in the param ++ * array and concatenates their values together. Reading stops when an element ++ * is reached which has all 0 struct values. The total number of bits specified ++ * for the fuse parameter across all segments must be less than or equal to 64. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value) ++{ ++ u64 fuse_val, val; ++ int bits; ++ int bits_total = 0; ++ ++ *param_value = 0; ++ ++ while (param->row || param->bit_start || param->bit_end) { ++ if (param->bit_start > param->bit_end ++ || param->bit_end > MAX_FUSE_ROW_BIT) { ++ pr_err("Invalid fuse parameter segment: row=%u, start=%u, end=%u\n", ++ param->row, param->bit_start, param->bit_end); ++ return -EINVAL; ++ } ++ ++ bits = param->bit_end - param->bit_start + 1; ++ if (bits_total + bits > 64) { ++ pr_err("Invalid fuse parameter segments; total bits = %d\n", ++ bits_total + bits); ++ return -EINVAL; ++ } ++ ++ fuse_val = readq_relaxed(fuse_base_addr ++ + param->row * BYTES_PER_FUSE_ROW); ++ val = (fuse_val >> param->bit_start) & ((1ULL << bits) - 1); ++ *param_value |= val << bits_total; ++ bits_total += bits; ++ ++ param++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_convert_open_loop_voltage_fuse() - converts an open loop voltage fuse ++ * value into an absolute voltage with units of microvolts ++ * @ref_volt: Reference voltage in microvolts ++ * @step_volt: The step size in microvolts of the fuse LSB ++ * @fuse: Open loop voltage fuse value ++ * @fuse_len: The bit length of the fuse value ++ * ++ * The MSB of the fuse parameter corresponds to a sign bit. If it is set, then ++ * the lower bits correspond to the number of steps to go down from the ++ * reference voltage. If it is not set, then the lower bits correspond to the ++ * number of steps to go up from the reference voltage. ++ */ ++int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse, ++ int fuse_len) ++{ ++ int sign, steps; ++ ++ sign = (fuse & (1 << (fuse_len - 1))) ? -1 : 1; ++ steps = fuse & ((1 << (fuse_len - 1)) - 1); ++ ++ return ref_volt + sign * steps * step_volt; ++} ++ ++/** ++ * cpr3_interpolate() - performs linear interpolation ++ * @x1 Lower known x value ++ * @y1 Lower known y value ++ * @x2 Upper known x value ++ * @y2 Upper known y value ++ * @x Intermediate x value ++ * ++ * Returns y where (x, y) falls on the line between (x1, y1) and (x2, y2). ++ * It is required that x1 < x2, y1 <= y2, and x1 <= x <= x2. If these ++ * conditions are not met, then y2 will be returned. ++ */ ++u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x) ++{ ++ u64 temp; ++ ++ if (x1 >= x2 || y1 > y2 || x1 > x || x > x2) ++ return y2; ++ ++ temp = (x2 - x) * (y2 - y1); ++ do_div(temp, (u32)(x2 - x1)); ++ ++ return y2 - temp; ++} ++ ++/** ++ * cpr3_parse_array_property() - fill an array from a portion of the values ++ * specified for a device tree property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each tuple ++ * @out: Output data array which must be of size tuple_size ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combos_supported ++ * (reading begins at index tuple_size * vreg->fuse_combo) ++ * 3. Length == tuple_size * vreg->speed_bins_supported ++ * (reading begins at index tuple_size * vreg->speed_bin_fuse) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo; ++ } else if (vreg->speed_bins_supported > 0 && ++ len == tuple_size * vreg->speed_bins_supported * sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_fuse; ++ } else { ++ if (vreg->speed_bins_supported > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * sizeof(u32), ++ tuple_size * vreg->speed_bins_supported ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * sizeof(u32), ++ tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_corner_array_property() - fill a per-corner array from a portion ++ * of the values specified for a device tree property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each per-corner tuple ++ * @out: Output data array which must be of size: ++ * tuple_size * vreg->corner_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size * vreg->corner_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combo_corner_sum ++ * (reading begins at index tuple_size * vreg->fuse_combo_offset) ++ * 3. Length == tuple_size * vreg->speed_bin_corner_sum ++ * (reading begins at index tuple_size * vreg->speed_bin_offset) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * vreg->corner_count * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo_offset; ++ } else if (vreg->speed_bin_corner_sum > 0 && ++ len == tuple_size * vreg->speed_bin_corner_sum * sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_offset; ++ } else { ++ if (vreg->speed_bin_corner_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_count * sizeof(u32), ++ tuple_size * vreg->speed_bin_corner_sum ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_count * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size * vreg->corner_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_corner_band_array_property() - fill a per-corner band array ++ * from a portion of the values specified for a device tree ++ * property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each per-corner band tuple ++ * @out: Output data array which must be of size: ++ * tuple_size * vreg->corner_band_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * In addition, corner band fuse combo and speed bin sum and offset elements ++ * must be initialized prior to executing this function. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size * vreg->corner_band_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combo_corner_band_sum ++ * (reading begins at index tuple_size * ++ * vreg->fuse_combo_corner_band_offset) ++ * 3. Length == tuple_size * vreg->speed_bin_corner_band_sum ++ * (reading begins at index tuple_size * ++ * vreg->speed_bin_corner_band_offset) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * vreg->corner_band_count * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo_corner_band_offset; ++ } else if (vreg->speed_bin_corner_band_sum > 0 && ++ len == tuple_size * vreg->speed_bin_corner_band_sum * ++ sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_corner_band_offset; ++ } else { ++ if (vreg->speed_bin_corner_band_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_band_count * ++ sizeof(u32), ++ tuple_size * vreg->speed_bin_corner_band_sum ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_band_count * ++ sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size * vreg->corner_band_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_common_corner_data() - parse common CPR3 properties relating to ++ * the corners supported by a CPR3 regulator from device tree ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function reads, validates, and utilizes the following device tree ++ * properties: qcom,cpr-fuse-corners, qcom,cpr-fuse-combos, qcom,cpr-speed-bins, ++ * qcom,cpr-speed-bin-corners, qcom,cpr-corners, qcom,cpr-voltage-ceiling, ++ * qcom,cpr-voltage-floor, qcom,corner-frequencies, ++ * and qcom,cpr-corner-fmax-map. ++ * ++ * It initializes these CPR3 regulator elements: corner, corner_count, ++ * fuse_combos_supported, fuse_corner_map, and speed_bins_supported. It ++ * initializes these elements for each corner: ceiling_volt, floor_volt, ++ * proc_freq, and cpr_fuse_corner. ++ * ++ * It requires that the following CPR3 regulator elements be initialized before ++ * being called: fuse_corner_count, fuse_combo, and speed_bin_fuse. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ u32 max_fuse_combos, fuse_corners, aging_allowed = 0; ++ u32 max_speed_bins = 0; ++ u32 *combo_corners; ++ u32 *speed_bin_corners; ++ u32 *temp; ++ int i, j, rc; ++ ++ rc = of_property_read_u32(node, "qcom,cpr-fuse-corners", &fuse_corners); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-fuse-corners, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (vreg->fuse_corner_count != fuse_corners) { ++ cpr3_err(vreg, "device tree config supports %d fuse corners but the hardware has %d fuse corners\n", ++ fuse_corners, vreg->fuse_corner_count); ++ return -EINVAL; ++ } ++ ++ rc = of_property_read_u32(node, "qcom,cpr-fuse-combos", ++ &max_fuse_combos); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-fuse-combos, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Sanity check against arbitrarily large value to avoid excessive ++ * memory allocation. ++ */ ++ if (max_fuse_combos > 100 || max_fuse_combos == 0) { ++ cpr3_err(vreg, "qcom,cpr-fuse-combos is invalid: %u\n", ++ max_fuse_combos); ++ return -EINVAL; ++ } ++ ++ if (vreg->fuse_combo >= max_fuse_combos) { ++ cpr3_err(vreg, "device tree config supports fuse combos 0-%u but the hardware has combo %d\n", ++ max_fuse_combos - 1, vreg->fuse_combo); ++ BUG_ON(1); ++ return -EINVAL; ++ } ++ ++ vreg->fuse_combos_supported = max_fuse_combos; ++ ++ of_property_read_u32(node, "qcom,cpr-speed-bins", &max_speed_bins); ++ ++ /* ++ * Sanity check against arbitrarily large value to avoid excessive ++ * memory allocation. ++ */ ++ if (max_speed_bins > 100) { ++ cpr3_err(vreg, "qcom,cpr-speed-bins is invalid: %u\n", ++ max_speed_bins); ++ return -EINVAL; ++ } ++ ++ if (max_speed_bins && vreg->speed_bin_fuse >= max_speed_bins) { ++ cpr3_err(vreg, "device tree config supports speed bins 0-%u but the hardware has speed bin %d\n", ++ max_speed_bins - 1, vreg->speed_bin_fuse); ++ BUG(); ++ return -EINVAL; ++ } ++ ++ vreg->speed_bins_supported = max_speed_bins; ++ ++ combo_corners = kcalloc(vreg->fuse_combos_supported, ++ sizeof(*combo_corners), GFP_KERNEL); ++ if (!combo_corners) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(node, "qcom,cpr-corners", combo_corners, ++ vreg->fuse_combos_supported); ++ if (rc == -EOVERFLOW) { ++ /* Single value case */ ++ rc = of_property_read_u32(node, "qcom,cpr-corners", ++ combo_corners); ++ for (i = 1; i < vreg->fuse_combos_supported; i++) ++ combo_corners[i] = combo_corners[0]; ++ } ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-corners, rc=%d\n", ++ rc); ++ kfree(combo_corners); ++ return rc; ++ } ++ ++ vreg->fuse_combo_offset = 0; ++ vreg->fuse_combo_corner_sum = 0; ++ for (i = 0; i < vreg->fuse_combos_supported; i++) { ++ vreg->fuse_combo_corner_sum += combo_corners[i]; ++ if (i < vreg->fuse_combo) ++ vreg->fuse_combo_offset += combo_corners[i]; ++ } ++ ++ vreg->corner_count = combo_corners[vreg->fuse_combo]; ++ ++ kfree(combo_corners); ++ ++ vreg->speed_bin_offset = 0; ++ vreg->speed_bin_corner_sum = 0; ++ if (vreg->speed_bins_supported > 0) { ++ speed_bin_corners = kcalloc(vreg->speed_bins_supported, ++ sizeof(*speed_bin_corners), GFP_KERNEL); ++ if (!speed_bin_corners) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(node, ++ "qcom,cpr-speed-bin-corners", speed_bin_corners, ++ vreg->speed_bins_supported); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-speed-bin-corners, rc=%d\n", ++ rc); ++ kfree(speed_bin_corners); ++ return rc; ++ } ++ ++ for (i = 0; i < vreg->speed_bins_supported; i++) { ++ vreg->speed_bin_corner_sum += speed_bin_corners[i]; ++ if (i < vreg->speed_bin_fuse) ++ vreg->speed_bin_offset += speed_bin_corners[i]; ++ } ++ ++ if (speed_bin_corners[vreg->speed_bin_fuse] ++ != vreg->corner_count) { ++ cpr3_err(vreg, "qcom,cpr-corners and qcom,cpr-speed-bin-corners conflict on number of corners: %d vs %u\n", ++ vreg->corner_count, ++ speed_bin_corners[vreg->speed_bin_fuse]); ++ kfree(speed_bin_corners); ++ return -EINVAL; ++ } ++ ++ kfree(speed_bin_corners); ++ } ++ ++ vreg->corner = devm_kcalloc(ctrl->dev, vreg->corner_count, ++ sizeof(*vreg->corner), GFP_KERNEL); ++ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL); ++ if (!vreg->corner || !temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-ceiling", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) { ++ vreg->corner[i].ceiling_volt ++ = CPR3_ROUND(temp[i], ctrl->step_volt); ++ vreg->corner[i].abs_ceiling_volt = vreg->corner[i].ceiling_volt; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-floor", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].floor_volt ++ = CPR3_ROUND(temp[i], ctrl->step_volt); ++ ++ /* Validate ceiling and floor values */ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].floor_volt ++ > vreg->corner[i].ceiling_volt) { ++ cpr3_err(vreg, "CPR floor[%d]=%d > ceiling[%d]=%d uV\n", ++ i, vreg->corner[i].floor_volt, ++ i, vreg->corner[i].ceiling_volt); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ ++ /* Load optional system-supply voltages */ ++ if (of_find_property(vreg->of_node, "qcom,system-voltage", NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,system-voltage", 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].system_volt = temp[i]; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,corner-frequencies", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].proc_freq = temp[i]; ++ ++ /* Validate frequencies */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].proc_freq ++ < vreg->corner[i - 1].proc_freq) { ++ cpr3_err(vreg, "invalid frequency: freq[%d]=%u < freq[%d]=%u\n", ++ i, vreg->corner[i].proc_freq, i - 1, ++ vreg->corner[i - 1].proc_freq); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ ++ vreg->fuse_corner_map = devm_kcalloc(ctrl->dev, vreg->fuse_corner_count, ++ sizeof(*vreg->fuse_corner_map), GFP_KERNEL); ++ if (!vreg->fuse_corner_map) { ++ rc = -ENOMEM; ++ goto free_temp; ++ } ++ ++ rc = cpr3_parse_array_property(vreg, "qcom,cpr-corner-fmax-map", ++ vreg->fuse_corner_count, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ vreg->fuse_corner_map[i] = temp[i] - CPR3_CORNER_OFFSET; ++ if (temp[i] < CPR3_CORNER_OFFSET ++ || temp[i] > vreg->corner_count + CPR3_CORNER_OFFSET) { ++ cpr3_err(vreg, "invalid corner value specified in qcom,cpr-corner-fmax-map: %u\n", ++ temp[i]); ++ rc = -EINVAL; ++ goto free_temp; ++ } else if (i > 0 && temp[i - 1] >= temp[i]) { ++ cpr3_err(vreg, "invalid corner %u less than or equal to previous corner %u\n", ++ temp[i], temp[i - 1]); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ if (temp[vreg->fuse_corner_count - 1] != vreg->corner_count) ++ cpr3_debug(vreg, "Note: highest Fmax corner %u in qcom,cpr-corner-fmax-map does not match highest supported corner %d\n", ++ temp[vreg->fuse_corner_count - 1], ++ vreg->corner_count); ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0; j < vreg->fuse_corner_count; j++) { ++ if (i + CPR3_CORNER_OFFSET <= temp[j]) { ++ vreg->corner[i].cpr_fuse_corner = j; ++ break; ++ } ++ } ++ if (j == vreg->fuse_corner_count) { ++ /* ++ * Handle the case where the highest fuse corner maps ++ * to a corner below the highest corner. ++ */ ++ vreg->corner[i].cpr_fuse_corner ++ = vreg->fuse_corner_count - 1; ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,allow-aging-voltage-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,allow-aging-voltage-adjustment", ++ 1, &aging_allowed); ++ if (rc) ++ goto free_temp; ++ ++ vreg->aging_allowed = aging_allowed; ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,allow-aging-open-loop-voltage-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,allow-aging-open-loop-voltage-adjustment", ++ 1, &aging_allowed); ++ if (rc) ++ goto free_temp; ++ ++ vreg->aging_allow_open_loop_adj = aging_allowed; ++ } ++ ++ if (vreg->aging_allowed) { ++ if (ctrl->aging_ref_volt <= 0) { ++ cpr3_err(ctrl, "qcom,cpr-aging-ref-voltage must be specified\n"); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-aging-max-voltage-adjustment", ++ 1, &vreg->aging_max_adjust_volt); ++ if (rc) ++ goto free_temp; ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-aging-ref-corner", 1, &vreg->aging_corner); ++ if (rc) { ++ goto free_temp; ++ } else if (vreg->aging_corner < CPR3_CORNER_OFFSET ++ || vreg->aging_corner > vreg->corner_count - 1 ++ + CPR3_CORNER_OFFSET) { ++ cpr3_err(vreg, "aging reference corner=%d not in range [%d, %d]\n", ++ vreg->aging_corner, CPR3_CORNER_OFFSET, ++ vreg->corner_count - 1 + CPR3_CORNER_OFFSET); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ vreg->aging_corner -= CPR3_CORNER_OFFSET; ++ ++ if (of_find_property(vreg->of_node, "qcom,cpr-aging-derate", ++ NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-aging-derate", 1, temp); ++ if (rc) ++ goto free_temp; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].aging_derate = temp[i]; ++ } else { ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].aging_derate ++ = CPR3_AGING_DERATE_UNITY; ++ } ++ } ++ ++free_temp: ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr3_parse_thread_u32() - parse the specified property from the CPR3 thread's ++ * device tree node and verify that it is within the allowed limits ++ * @thread: Pointer to the CPR3 thread ++ * @propname: The name of the device tree property to read ++ * @out_value: The output pointer to fill with the value read ++ * @value_min: The minimum allowed property value ++ * @value_max: The maximum allowed property value ++ * ++ * This function prints a verbose error message if the property is missing or ++ * has a value which is not within the specified range. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(thread->of_node, propname, out_value); ++ if (rc) { ++ cpr3_err(thread->ctrl, "thread %u error reading property %s, rc=%d\n", ++ thread->thread_id, propname, rc); ++ return rc; ++ } ++ ++ if (*out_value < value_min || *out_value > value_max) { ++ cpr3_err(thread->ctrl, "thread %u %s=%u is invalid; allowed range: [%u, %u]\n", ++ thread->thread_id, propname, *out_value, value_min, ++ value_max); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_ctrl_u32() - parse the specified property from the CPR3 ++ * controller's device tree node and verify that it is within the ++ * allowed limits ++ * @ctrl: Pointer to the CPR3 controller ++ * @propname: The name of the device tree property to read ++ * @out_value: The output pointer to fill with the value read ++ * @value_min: The minimum allowed property value ++ * @value_max: The maximum allowed property value ++ * ++ * This function prints a verbose error message if the property is missing or ++ * has a value which is not within the specified range. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, propname, out_value); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property %s, rc=%d\n", ++ propname, rc); ++ return rc; ++ } ++ ++ if (*out_value < value_min || *out_value > value_max) { ++ cpr3_err(ctrl, "%s=%u is invalid; allowed range: [%u, %u]\n", ++ propname, *out_value, value_min, value_max); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_common_thread_data() - parse common CPR3 thread properties from ++ * device tree ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_thread_data(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-up", ++ &thread->consecutive_up, CPR3_CONSECUTIVE_UP_DOWN_MIN, ++ CPR3_CONSECUTIVE_UP_DOWN_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-down", ++ &thread->consecutive_down, CPR3_CONSECUTIVE_UP_DOWN_MIN, ++ CPR3_CONSECUTIVE_UP_DOWN_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-up-threshold", ++ &thread->up_threshold, CPR3_UP_DOWN_THRESHOLD_MIN, ++ CPR3_UP_DOWN_THRESHOLD_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-down-threshold", ++ &thread->down_threshold, CPR3_UP_DOWN_THRESHOLD_MIN, ++ CPR3_UP_DOWN_THRESHOLD_MAX); ++ if (rc) ++ return rc; ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_irq_affinity() - parse CPR IRQ affinity information ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_parse_irq_affinity(struct cpr3_controller *ctrl) ++{ ++ struct device_node *cpu_node; ++ int i, cpu; ++ int len = 0; ++ ++ if (!of_find_property(ctrl->dev->of_node, "qcom,cpr-interrupt-affinity", ++ &len)) { ++ /* No IRQ affinity required */ ++ return 0; ++ } ++ ++ len /= sizeof(u32); ++ ++ for (i = 0; i < len; i++) { ++ cpu_node = of_parse_phandle(ctrl->dev->of_node, ++ "qcom,cpr-interrupt-affinity", i); ++ if (!cpu_node) { ++ cpr3_err(ctrl, "could not find CPU node %d\n", i); ++ return -EINVAL; ++ } ++ ++ for_each_possible_cpu(cpu) { ++ if (of_get_cpu_node(cpu, NULL) == cpu_node) { ++ cpumask_set_cpu(cpu, &ctrl->irq_affinity_mask); ++ break; ++ } ++ } ++ of_node_put(cpu_node); ++ } ++ ++ return 0; ++} ++ ++static int cpr3_panic_notifier_init(struct cpr3_controller *ctrl) ++{ ++ struct device_node *node = ctrl->dev->of_node; ++ struct cpr3_panic_regs_info *panic_regs_info; ++ struct cpr3_reg_info *regs; ++ int i, reg_count, len, rc = 0; ++ ++ if (!of_find_property(node, "qcom,cpr-panic-reg-addr-list", &len)) { ++ /* panic register address list not specified */ ++ return rc; ++ } ++ ++ reg_count = len / sizeof(u32); ++ if (!reg_count) { ++ cpr3_err(ctrl, "qcom,cpr-panic-reg-addr-list has invalid len = %d\n", ++ len); ++ return -EINVAL; ++ } ++ ++ if (!of_find_property(node, "qcom,cpr-panic-reg-name-list", NULL)) { ++ cpr3_err(ctrl, "property qcom,cpr-panic-reg-name-list not specified\n"); ++ return -EINVAL; ++ } ++ ++ len = of_property_count_strings(node, "qcom,cpr-panic-reg-name-list"); ++ if (reg_count != len) { ++ cpr3_err(ctrl, "qcom,cpr-panic-reg-name-list should have %d strings\n", ++ reg_count); ++ return -EINVAL; ++ } ++ ++ panic_regs_info = devm_kzalloc(ctrl->dev, sizeof(*panic_regs_info), ++ GFP_KERNEL); ++ if (!panic_regs_info) ++ return -ENOMEM; ++ ++ regs = devm_kcalloc(ctrl->dev, reg_count, sizeof(*regs), GFP_KERNEL); ++ if (!regs) ++ return -ENOMEM; ++ ++ for (i = 0; i < reg_count; i++) { ++ rc = of_property_read_string_index(node, ++ "qcom,cpr-panic-reg-name-list", i, ++ &(regs[i].name)); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-name-list, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32_index(node, ++ "qcom,cpr-panic-reg-addr-list", i, ++ &(regs[i].addr)); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-addr-list, rc=%d\n", ++ rc); ++ return rc; ++ } ++ regs[i].virt_addr = devm_ioremap(ctrl->dev, regs[i].addr, 0x4); ++ if (!regs[i].virt_addr) { ++ pr_err("Unable to map panic register addr 0x%08x\n", ++ regs[i].addr); ++ return -EINVAL; ++ } ++ regs[i].value = 0xFFFFFFFF; ++ } ++ ++ panic_regs_info->reg_count = reg_count; ++ panic_regs_info->regs = regs; ++ ctrl->panic_regs_info = panic_regs_info; ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_common_ctrl_data() - parse common CPR3 controller properties from ++ * device tree ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-sensor-time", ++ &ctrl->sensor_time, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-loop-time", ++ &ctrl->loop_time, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-idle-cycles", ++ &ctrl->idle_clocks, CPR3_IDLE_CLOCKS_MIN, ++ CPR3_IDLE_CLOCKS_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-min", ++ &ctrl->step_quot_init_min, CPR3_STEP_QUOT_MIN, ++ CPR3_STEP_QUOT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-max", ++ &ctrl->step_quot_init_max, CPR3_STEP_QUOT_MIN, ++ CPR3_STEP_QUOT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step", ++ &ctrl->step_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n", ++ rc); ++ return rc; ++ } ++ if (ctrl->step_volt <= 0) { ++ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n", ++ ctrl->step_volt); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-count-mode", ++ &ctrl->count_mode, CPR3_COUNT_MODE_ALL_AT_ONCE_MIN, ++ CPR3_COUNT_MODE_STAGGERED); ++ if (rc) ++ return rc; ++ ++ /* Count repeat is optional */ ++ ctrl->count_repeat = 0; ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-count-repeat", ++ &ctrl->count_repeat); ++ ++ ctrl->cpr_allowed_sw = ++ of_property_read_bool(ctrl->dev->of_node, "qcom,cpr-enable") || ++ ctrl->cpr_global_setting == CPR_CLOSED_LOOP_EN; ++ ++ rc = cpr3_parse_irq_affinity(ctrl); ++ if (rc) ++ return rc; ++ ++ /* Aging reference voltage is optional */ ++ ctrl->aging_ref_volt = 0; ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-aging-ref-voltage", ++ &ctrl->aging_ref_volt); ++ ++ /* Aging possible bitmask is optional */ ++ ctrl->aging_possible_mask = 0; ++ of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-aging-allowed-reg-mask", ++ &ctrl->aging_possible_mask); ++ ++ if (ctrl->aging_possible_mask) { ++ /* ++ * Aging possible register value required if bitmask is ++ * specified ++ */ ++ rc = cpr3_parse_ctrl_u32(ctrl, ++ "qcom,cpr-aging-allowed-reg-value", ++ &ctrl->aging_possible_val, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ } ++ ++ if (of_find_property(ctrl->dev->of_node, "clock-names", NULL)) { ++ ctrl->core_clk = devm_clk_get(ctrl->dev, "core_clk"); ++ if (IS_ERR(ctrl->core_clk)) { ++ rc = PTR_ERR(ctrl->core_clk); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable request core clock, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_panic_notifier_init(ctrl); ++ if (rc) ++ return rc; ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) { ++ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd"); ++ if (IS_ERR(ctrl->vdd_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ cpr3_err(ctrl, "vdd supply is not defined\n"); ++ return -ENODEV; ++ } ++ ++ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev, ++ "system"); ++ if (IS_ERR(ctrl->system_regulator)) { ++ rc = PTR_ERR(ctrl->system_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->system_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev, ++ "mem-acc"); ++ if (IS_ERR(ctrl->mem_acc_regulator)) { ++ rc = PTR_ERR(ctrl->mem_acc_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->mem_acc_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_open_loop_common_ctrl_data() - parse common open loop CPR3 ++ * controller properties from device tree ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step", ++ &ctrl->step_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->step_volt <= 0) { ++ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n", ++ ctrl->step_volt); ++ return -EINVAL; ++ } ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) { ++ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd"); ++ if (IS_ERR(ctrl->vdd_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ cpr3_err(ctrl, "vdd supply is not defined\n"); ++ return -ENODEV; ++ } ++ ++ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev, ++ "system"); ++ if (IS_ERR(ctrl->system_regulator)) { ++ rc = PTR_ERR(ctrl->system_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->system_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } else { ++ rc = regulator_enable(ctrl->system_regulator); ++ } ++ ++ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev, ++ "mem-acc"); ++ if (IS_ERR(ctrl->mem_acc_regulator)) { ++ rc = PTR_ERR(ctrl->mem_acc_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->mem_acc_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_limit_open_loop_voltages() - modify the open-loop voltage of each corner ++ * so that it fits within the floor to ceiling ++ * voltage range of the corner ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function clips the open-loop voltage for each corner so that it is ++ * limited to the floor to ceiling range. It also rounds each open-loop voltage ++ * so that it corresponds to a set point available to the underlying regulator. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ int i, volt; ++ ++ cpr3_debug(vreg, "open-loop voltages after trimming and rounding:\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ volt = CPR3_ROUND(vreg->corner[i].open_loop_volt, ++ vreg->thread->ctrl->step_volt); ++ if (volt < vreg->corner[i].floor_volt) ++ volt = vreg->corner[i].floor_volt; ++ else if (volt > vreg->corner[i].ceiling_volt) ++ volt = vreg->corner[i].ceiling_volt; ++ vreg->corner[i].open_loop_volt = volt; ++ cpr3_debug(vreg, "corner[%2d]: open-loop=%d uV\n", i, volt); ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_open_loop_voltage_as_ceiling() - configures the ceiling voltage for each ++ * corner to equal the open-loop voltage if the relevant device ++ * tree property is found for the CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function assumes that the the open-loop voltage for each corner has ++ * already been rounded to the nearest allowed set point and that it falls ++ * within the floor to ceiling range. ++ * ++ * Return: none ++ */ ++void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg) ++{ ++ int i; ++ ++ if (!of_property_read_bool(vreg->of_node, ++ "qcom,cpr-scaled-open-loop-voltage-as-ceiling")) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].open_loop_volt; ++} ++ ++/** ++ * cpr3_limit_floor_voltages() - raise the floor voltage of each corner so that ++ * the optional maximum floor to ceiling voltage range specified in ++ * device tree is satisfied ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function also ensures that the open-loop voltage for each corner falls ++ * within the final floor to ceiling voltage range and that floor voltages ++ * increase monotonically. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg) ++{ ++ char *prop = "qcom,cpr-floor-to-ceiling-max-range"; ++ int i, floor_new; ++ u32 *floor_range; ++ int rc = 0; ++ ++ if (!of_find_property(vreg->of_node, prop, NULL)) ++ goto enforce_monotonicity; ++ ++ floor_range = kcalloc(vreg->corner_count, sizeof(*floor_range), ++ GFP_KERNEL); ++ if (!floor_range) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, prop, 1, floor_range); ++ if (rc) ++ goto free_floor_adjust; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if ((s32)floor_range[i] >= 0) { ++ floor_new = CPR3_ROUND(vreg->corner[i].ceiling_volt ++ - floor_range[i], ++ vreg->thread->ctrl->step_volt); ++ ++ vreg->corner[i].floor_volt = max(floor_new, ++ vreg->corner[i].floor_volt); ++ if (vreg->corner[i].open_loop_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].floor_volt; ++ } ++ } ++ ++free_floor_adjust: ++ kfree(floor_range); ++ ++enforce_monotonicity: ++ /* Ensure that floor voltages increase monotonically. */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].floor_volt ++ < vreg->corner[i - 1].floor_volt) { ++ cpr3_debug(vreg, "corner %d floor voltage=%d uV < corner %d voltage=%d uV; overriding: corner %d voltage=%d\n", ++ i, vreg->corner[i].floor_volt, ++ i - 1, vreg->corner[i - 1].floor_volt, ++ i, vreg->corner[i - 1].floor_volt); ++ vreg->corner[i].floor_volt ++ = vreg->corner[i - 1].floor_volt; ++ ++ if (vreg->corner[i].open_loop_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].floor_volt; ++ if (vreg->corner[i].ceiling_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].floor_volt; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_print_quots() - print CPR target quotients into the kernel log for ++ * debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: none ++ */ ++void cpr3_print_quots(struct cpr3_regulator *vreg) ++{ ++ int i, j, pos; ++ size_t buflen; ++ char *buf; ++ ++ buflen = sizeof(*buf) * CPR3_RO_COUNT * (MAX_CHARS_PER_INT + 2); ++ buf = kzalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0, pos = 0; j < CPR3_RO_COUNT; j++) ++ pos += scnprintf(buf + pos, buflen - pos, " %u", ++ vreg->corner[i].target_quot[j]); ++ cpr3_debug(vreg, "target quots[%2d]:%s\n", i, buf); ++ } ++ ++ kfree(buf); ++} ++ ++/** ++ * cpr3_determine_part_type() - determine the part type (SS/TT/FF). ++ * ++ * qcom,cpr-part-types prop tells the number of part types for which correction ++ * voltages are different. Another prop qcom,cpr-parts-voltage will contain the ++ * open loop fuse voltage which will be compared with this part voltage ++ * and accordingly part type will de determined. ++ * ++ * if qcom,cpr-part-types has value n, then qcom,cpr-parts-voltage will be ++ * array of n - 1 elements which will contain the voltage in increasing order. ++ * This function compares the fused volatge with all these voltage and returns ++ * the first index for which the fused volatge is greater. ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt: fused open loop voltage which will be compared with ++ * qcom,cpr-parts-voltage array ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt) ++{ ++ int i, rc, len; ++ u32 volt; ++ int soc_version_major; ++ char prop_name[100]; ++ const char prop_name_def[] = "qcom,cpr-parts-voltage"; ++ const char prop_name_v2[] = "qcom,cpr-parts-voltage-v2"; ++ ++ soc_version_major = read_ipq_soc_version_major(); ++ BUG_ON(soc_version_major <= 0); ++ ++ if (of_property_read_u32(vreg->of_node, "qcom,cpr-part-types", ++ &vreg->part_type_supported)) ++ return 0; ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_name, prop_name_v2, sizeof(prop_name_v2)); ++ else ++ strlcpy(prop_name, prop_name_def, sizeof(prop_name_def)); ++ ++ if (!of_find_property(vreg->of_node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len != (vreg->part_type_supported - 1) * sizeof(u32)) { ++ cpr3_err(vreg, "wrong len in qcom,cpr-parts-voltage\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < vreg->part_type_supported - 1; i++) { ++ rc = of_property_read_u32_index(vreg->of_node, ++ prop_name, i, &volt); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ ++ if (fuse_volt < volt) ++ break; ++ } ++ ++ vreg->part_type = i; ++ return 0; ++} ++ ++int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ int i, rc, prev_volt; ++ int *volt_adjust; ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(prop_str, "qcom,cpr-cold-temp-voltage-adjustment", ++ sizeof(prop_str)); ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_info(vreg, "No cold temperature adjustment required.\n"); ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ if (!volt_adjust) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, prop_str, ++ vreg->fuse_corner_count, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load cold temp voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = fuse_volt[i]; ++ fuse_volt[i] += volt_adjust[i]; ++ cpr3_debug(vreg, ++ "adjusted fuse corner %d open-loop voltage: %d -> %d uV\n", ++ i, prev_volt, fuse_volt[i]); ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_can_adjust_cold_temp() - Is cold temperature adjustment available ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function checks the cold temperature threshold is available ++ * ++ * Return: true on cold temperature threshold is available, else false ++ */ ++bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg) ++{ ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2", ++ sizeof(prop_str)); ++ else ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold", ++ sizeof(prop_str)); ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ return false; ++ } else ++ return true; ++} ++ ++/** ++ * cpr3_get_cold_temp_threshold() - get cold temperature threshold ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * @cold_temp: cold temperature read. ++ * ++ * This function reads the cold temperature threshold below which ++ * cold temperature adjustment margins will be applied. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp) ++{ ++ int rc; ++ u32 temp; ++ char req_prop_str[75], prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(req_prop_str, sizeof(req_prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(req_prop_str, sizeof(req_prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(req_prop_str, "qcom,cpr-cold-temp-voltage-adjustment", ++ sizeof(req_prop_str)); ++ } ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2", ++ sizeof(prop_str)); ++ else ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold", ++ sizeof(prop_str)); ++ ++ if (!of_find_property(vreg->of_node, req_prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_info(vreg, "Cold temperature adjustment not required.\n"); ++ return 0; ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_err(vreg, "Missing %s required for %s\n", ++ prop_str, req_prop_str); ++ return -EINVAL; ++ } ++ ++ rc = of_property_read_u32(vreg->of_node, prop_str, &temp); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_str, rc); ++ return rc; ++ } ++ ++ *cold_temp = temp; ++ return 0; ++} ++ ++/** ++ * cpr3_adjust_fused_open_loop_voltages() - adjust the fused open-loop voltages ++ * for each fuse corner according to device tree values ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt: Pointer to an array of the fused open-loop voltage ++ * values ++ * ++ * Voltage values in fuse_volt are modified in place. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ int i, rc, prev_volt; ++ int *volt_adjust; ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-open-loop-voltage-fuse-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-open-loop-voltage-fuse-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(prop_str, "qcom,cpr-open-loop-voltage-fuse-adjustment", ++ sizeof(prop_str)); ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ if (!volt_adjust) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ++ prop_str, vreg->fuse_corner_count, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load open-loop fused voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = fuse_volt[i]; ++ fuse_volt[i] += volt_adjust[i]; ++ cpr3_debug(vreg, "adjusted fuse corner %d open-loop voltage: %d --> %d uV\n", ++ i, prev_volt, fuse_volt[i]); ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_adjust_open_loop_voltages() - adjust the open-loop voltages for each ++ * corner according to device tree values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ int i, rc, prev_volt, min_volt; ++ int *volt_adjust, *volt_diff; ++ ++ if (!of_find_property(vreg->of_node, ++ "qcom,cpr-open-loop-voltage-adjustment", NULL)) { ++ /* No adjustment required. */ ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ volt_diff = kcalloc(vreg->corner_count, sizeof(*volt_diff), GFP_KERNEL); ++ if (!volt_adjust || !volt_diff) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-open-loop-voltage-adjustment", 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load open-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = vreg->corner[i].open_loop_volt; ++ vreg->corner[i].open_loop_volt += volt_adjust[i]; ++ cpr3_debug(vreg, "adjusted corner %d open-loop voltage: %d --> %d uV\n", ++ i, prev_volt, vreg->corner[i].open_loop_volt); ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-open-loop-voltage-min-diff", NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-open-loop-voltage-min-diff", 1, volt_diff); ++ if (rc) { ++ cpr3_err(vreg, "could not load minimum open-loop voltage differences, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ /* ++ * Ensure that open-loop voltages increase monotonically with respect ++ * to configurable minimum allowed differences. ++ */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ min_volt = vreg->corner[i - 1].open_loop_volt + volt_diff[i]; ++ if (vreg->corner[i].open_loop_volt < min_volt) { ++ cpr3_debug(vreg, "adjusted corner %d open-loop voltage=%d uV < corner %d voltage=%d uV + min diff=%d uV; overriding: corner %d voltage=%d\n", ++ i, vreg->corner[i].open_loop_volt, ++ i - 1, vreg->corner[i - 1].open_loop_volt, ++ volt_diff[i], i, min_volt); ++ vreg->corner[i].open_loop_volt = min_volt; ++ } ++ } ++ ++done: ++ kfree(volt_diff); ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_quot_adjustment() - returns the quotient adjustment value resulting from ++ * the specified voltage adjustment and RO scaling factor ++ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units ++ * of QUOT/V ++ * @volt_adjust: The amount to adjust the voltage by in units of ++ * microvolts. This value may be positive or negative. ++ */ ++int cpr3_quot_adjustment(int ro_scale, int volt_adjust) ++{ ++ unsigned long long temp; ++ int quot_adjust; ++ int sign = 1; ++ ++ if (ro_scale < 0) { ++ sign = -sign; ++ ro_scale = -ro_scale; ++ } ++ ++ if (volt_adjust < 0) { ++ sign = -sign; ++ volt_adjust = -volt_adjust; ++ } ++ ++ temp = (unsigned long long)ro_scale * (unsigned long long)volt_adjust; ++ do_div(temp, 1000000); ++ ++ quot_adjust = temp; ++ quot_adjust *= sign; ++ ++ return quot_adjust; ++} ++ ++/** ++ * cpr3_voltage_adjustment() - returns the voltage adjustment value resulting ++ * from the specified quotient adjustment and RO scaling factor ++ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units ++ * of QUOT/V ++ * @quot_adjust: The amount to adjust the quotient by in units of ++ * QUOT. This value may be positive or negative. ++ */ ++int cpr3_voltage_adjustment(int ro_scale, int quot_adjust) ++{ ++ unsigned long long temp; ++ int volt_adjust; ++ int sign = 1; ++ ++ if (ro_scale < 0) { ++ sign = -sign; ++ ro_scale = -ro_scale; ++ } ++ ++ if (quot_adjust < 0) { ++ sign = -sign; ++ quot_adjust = -quot_adjust; ++ } ++ ++ if (ro_scale == 0) ++ return 0; ++ ++ temp = (unsigned long long)quot_adjust * 1000000; ++ do_div(temp, ro_scale); ++ ++ volt_adjust = temp; ++ volt_adjust *= sign; ++ ++ return volt_adjust; ++} ++ ++/** ++ * cpr3_parse_closed_loop_voltage_adjustments() - load per-fuse-corner and ++ * per-corner closed-loop adjustment values from device tree ++ * @vreg: Pointer to the CPR3 regulator ++ * @ro_sel: Array of ring oscillator values selected for each ++ * fuse corner ++ * @volt_adjust: Pointer to array which will be filled with the ++ * per-corner closed-loop adjustment voltages ++ * @volt_adjust_fuse: Pointer to array which will be filled with the ++ * per-fuse-corner closed-loop adjustment voltages ++ * @ro_scale: Pointer to array which will be filled with the ++ * per-fuse-corner RO scaling factor values with units of ++ * QUOT/V ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_closed_loop_voltage_adjustments( ++ struct cpr3_regulator *vreg, u64 *ro_sel, ++ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale) ++{ ++ int i, rc; ++ u32 *ro_all_scale; ++ ++ char volt_adj[] = "qcom,cpr-closed-loop-voltage-adjustment"; ++ char volt_fuse_adj[] = "qcom,cpr-closed-loop-voltage-fuse-adjustment"; ++ char ro_scaling[] = "qcom,cpr-ro-scaling-factor"; ++ ++ if (!of_find_property(vreg->of_node, volt_adj, NULL) ++ && !of_find_property(vreg->of_node, volt_fuse_adj, NULL) ++ && !vreg->aging_allowed) { ++ /* No adjustment required. */ ++ return 0; ++ } else if (!of_find_property(vreg->of_node, ro_scaling, NULL)) { ++ cpr3_err(vreg, "Missing %s required for closed-loop voltage adjustment.\n", ++ ro_scaling); ++ return -EINVAL; ++ } ++ ++ ro_all_scale = kcalloc(vreg->fuse_corner_count * CPR3_RO_COUNT, ++ sizeof(*ro_all_scale), GFP_KERNEL); ++ if (!ro_all_scale) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ro_scaling, ++ vreg->fuse_corner_count * CPR3_RO_COUNT, ro_all_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) ++ ro_scale[i] = ro_all_scale[i * CPR3_RO_COUNT + ro_sel[i]]; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ memcpy(vreg->corner[i].ro_scale, ++ &ro_all_scale[vreg->corner[i].cpr_fuse_corner * CPR3_RO_COUNT], ++ sizeof(*ro_all_scale) * CPR3_RO_COUNT); ++ ++ if (of_find_property(vreg->of_node, volt_fuse_adj, NULL)) { ++ rc = cpr3_parse_array_property(vreg, volt_fuse_adj, ++ vreg->fuse_corner_count, volt_adjust_fuse); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop fused voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, volt_adj, NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, volt_adj, ++ 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++done: ++ kfree(ro_all_scale); ++ return rc; ++} ++ ++/** ++ * cpr3_apm_init() - initialize APM data for a CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function loads memory array power mux (APM) data from device tree ++ * if it is present and requests a handle to the appropriate APM controller ++ * device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_apm_init(struct cpr3_controller *ctrl) ++{ ++ struct device_node *node = ctrl->dev->of_node; ++ int rc; ++ ++ if (!of_find_property(node, "qcom,apm-ctrl", NULL)) { ++ /* No APM used */ ++ return 0; ++ } ++ ++ ctrl->apm = msm_apm_ctrl_dev_get(ctrl->dev); ++ if (IS_ERR(ctrl->apm)) { ++ rc = PTR_ERR(ctrl->apm); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "APM get failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(node, "qcom,apm-threshold-voltage", ++ &ctrl->apm_threshold_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,apm-threshold-voltage, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ctrl->apm_threshold_volt ++ = CPR3_ROUND(ctrl->apm_threshold_volt, ctrl->step_volt); ++ ++ /* No error check since this is an optional property. */ ++ of_property_read_u32(node, "qcom,apm-hysteresis-voltage", ++ &ctrl->apm_adj_volt); ++ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt); ++ ++ ctrl->apm_high_supply = MSM_APM_SUPPLY_APCC; ++ ctrl->apm_low_supply = MSM_APM_SUPPLY_MX; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_mem_acc_init() - initialize mem-acc regulator data for ++ * a CPR3 regulator ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_mem_acc_init(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ u32 *temp; ++ int i, rc; ++ ++ if (!ctrl->mem_acc_regulator) { ++ cpr3_info(ctrl, "not using memory accelerator regulator\n"); ++ return 0; ++ } ++ ++ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL); ++ if (!temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,mem-acc-voltage", ++ 1, temp); ++ if (rc) { ++ cpr3_err(ctrl, "could not load mem-acc corners, rc=%d\n", rc); ++ } else { ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].mem_acc_volt = temp[i]; ++ } ++ ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr4_load_core_and_temp_adj() - parse amount of voltage adjustment for ++ * per-online-core and per-temperature voltage adjustment for a ++ * given corner or corner band from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * @num: Corner number or corner band number ++ * @use_corner_band: Boolean indicating if the CPR3 regulator supports ++ * adjustments per corner band ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_load_core_and_temp_adj(struct cpr3_regulator *vreg, ++ int num, bool use_corner_band) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr4_sdelta *sdelta; ++ int sdelta_size, i, j, pos, rc = 0; ++ char str[75]; ++ size_t buflen; ++ char *buf; ++ ++ sdelta = use_corner_band ? vreg->corner_band[num].sdelta : ++ vreg->corner[num].sdelta; ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj) { ++ /* corner doesn't need sdelta table */ ++ sdelta->max_core_count = 0; ++ sdelta->temp_band_count = 0; ++ return rc; ++ } ++ ++ sdelta_size = sdelta->max_core_count * sdelta->temp_band_count; ++ if (use_corner_band) ++ snprintf(str, sizeof(str), ++ "corner_band=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n", ++ num, sdelta->max_core_count, ++ sdelta->temp_band_count, sdelta_size); ++ else ++ snprintf(str, sizeof(str), ++ "corner=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n", ++ num, sdelta->max_core_count, ++ sdelta->temp_band_count, sdelta_size); ++ ++ cpr3_debug(vreg, "%s", str); ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, sdelta_size, ++ sizeof(*sdelta->table), GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ if (use_corner_band) ++ snprintf(str, sizeof(str), ++ "qcom,cpr-corner-band%d-temp-core-voltage-adjustment", ++ num + CPR3_CORNER_OFFSET); ++ else ++ snprintf(str, sizeof(str), ++ "qcom,cpr-corner%d-temp-core-voltage-adjustment", ++ num + CPR3_CORNER_OFFSET); ++ ++ rc = cpr3_parse_array_property(vreg, str, sdelta_size, ++ sdelta->table); ++ if (rc) { ++ cpr3_err(vreg, "could not load %s, rc=%d\n", str, rc); ++ return rc; ++ } ++ ++ /* ++ * Convert sdelta margins from uV to PMIC steps and apply negation to ++ * follow the SDELTA register semantics. ++ */ ++ for (i = 0; i < sdelta_size; i++) ++ sdelta->table[i] = -(sdelta->table[i] / ctrl->step_volt); ++ ++ buflen = sizeof(*buf) * sdelta_size * (MAX_CHARS_PER_INT + 2); ++ buf = kzalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return rc; ++ ++ for (i = 0; i < sdelta->max_core_count; i++) { ++ for (j = 0, pos = 0; j < sdelta->temp_band_count; j++) ++ pos += scnprintf(buf + pos, buflen - pos, " %u", ++ sdelta->table[i * sdelta->temp_band_count + j]); ++ cpr3_debug(vreg, "sdelta[%d]:%s\n", i, buf); ++ } ++ ++ kfree(buf); ++ return rc; ++} ++ ++/** ++ * cpr4_parse_core_count_temp_voltage_adj() - parse configuration data for ++ * per-online-core and per-temperature voltage adjustment for ++ * a CPR3 regulator from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * @use_corner_band: Boolean indicating if the CPR3 regulator supports ++ * adjustments per corner band ++ * ++ * This function supports parsing of per-online-core and per-temperature ++ * adjustments per corner or per corner band. CPR controllers which support ++ * corner bands apply the same adjustments to all corners within a corner band. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr4_parse_core_count_temp_voltage_adj( ++ struct cpr3_regulator *vreg, bool use_corner_band) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct device_node *node = vreg->of_node; ++ struct cpr3_corner *corner; ++ struct cpr4_sdelta *sdelta; ++ int i, sdelta_table_count, rc = 0; ++ int *allow_core_count_adj = NULL, *allow_temp_adj = NULL; ++ char prop_str[75]; ++ ++ if (of_find_property(node, use_corner_band ? ++ "qcom,corner-band-allow-temp-adjustment" ++ : "qcom,corner-allow-temp-adjustment", NULL)) { ++ if (!ctrl->allow_temp_adj) { ++ cpr3_err(ctrl, "Temperature adjustment configurations missing\n"); ++ return -EINVAL; ++ } ++ ++ vreg->allow_temp_adj = true; ++ } ++ ++ if (of_find_property(node, use_corner_band ? ++ "qcom,corner-band-allow-core-count-adjustment" ++ : "qcom,corner-allow-core-count-adjustment", ++ NULL)) { ++ rc = of_property_read_u32(node, "qcom,max-core-count", ++ &vreg->max_core_count); ++ if (rc) { ++ cpr3_err(vreg, "error reading qcom,max-core-count, rc=%d\n", ++ rc); ++ return -EINVAL; ++ } ++ ++ vreg->allow_core_count_adj = true; ++ ctrl->allow_core_count_adj = true; ++ } ++ ++ if (!vreg->allow_temp_adj && !vreg->allow_core_count_adj) { ++ /* ++ * Both per-online-core and temperature based adjustments are ++ * disabled for this regulator. ++ */ ++ return 0; ++ } else if (!vreg->allow_core_count_adj) { ++ /* ++ * Only per-temperature voltage adjusments are allowed. ++ * Keep max core count value as 1 to allocate SDELTA. ++ */ ++ vreg->max_core_count = 1; ++ } ++ ++ if (vreg->allow_core_count_adj) { ++ allow_core_count_adj = kcalloc(vreg->corner_count, ++ sizeof(*allow_core_count_adj), ++ GFP_KERNEL); ++ if (!allow_core_count_adj) ++ return -ENOMEM; ++ ++ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ? ++ "qcom,corner-band-allow-core-count-adjustment" : ++ "qcom,corner-allow-core-count-adjustment"); ++ ++ rc = use_corner_band ? ++ cpr3_parse_corner_band_array_property(vreg, prop_str, ++ 1, allow_core_count_adj) : ++ cpr3_parse_corner_array_property(vreg, prop_str, ++ 1, allow_core_count_adj); ++ if (rc) { ++ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str, ++ rc); ++ goto done; ++ } ++ } ++ ++ if (vreg->allow_temp_adj) { ++ allow_temp_adj = kcalloc(vreg->corner_count, ++ sizeof(*allow_temp_adj), GFP_KERNEL); ++ if (!allow_temp_adj) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ? ++ "qcom,corner-band-allow-temp-adjustment" : ++ "qcom,corner-allow-temp-adjustment"); ++ ++ rc = use_corner_band ? ++ cpr3_parse_corner_band_array_property(vreg, prop_str, ++ 1, allow_temp_adj) : ++ cpr3_parse_corner_array_property(vreg, prop_str, ++ 1, allow_temp_adj); ++ if (rc) { ++ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str, ++ rc); ++ goto done; ++ } ++ } ++ ++ sdelta_table_count = use_corner_band ? vreg->corner_band_count : ++ vreg->corner_count; ++ ++ for (i = 0; i < sdelta_table_count; i++) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*corner->sdelta), ++ GFP_KERNEL); ++ if (!sdelta) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ if (allow_core_count_adj) ++ sdelta->allow_core_count_adj = allow_core_count_adj[i]; ++ if (allow_temp_adj) ++ sdelta->allow_temp_adj = allow_temp_adj[i]; ++ sdelta->max_core_count = vreg->max_core_count; ++ sdelta->temp_band_count = ctrl->temp_band_count; ++ ++ if (use_corner_band) ++ vreg->corner_band[i].sdelta = sdelta; ++ else ++ vreg->corner[i].sdelta = sdelta; ++ ++ rc = cpr4_load_core_and_temp_adj(vreg, i, use_corner_band); ++ if (rc) { ++ cpr3_err(vreg, "corner/band %d core and temp adjustment loading failed, rc=%d\n", ++ i, rc); ++ goto done; ++ } ++ } ++ ++done: ++ kfree(allow_core_count_adj); ++ kfree(allow_temp_adj); ++ ++ return rc; ++} ++ ++/** ++ * cprh_adjust_voltages_for_apm() - adjust per-corner floor and ceiling voltages ++ * so that they do not overlap the APM threshold voltage. ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * The memory array power mux (APM) must be configured for a specific supply ++ * based upon where the VDD voltage lies with respect to the APM threshold ++ * voltage. When using CPR hardware closed-loop, the voltage may vary anywhere ++ * between the floor and ceiling voltage without software notification. ++ * Therefore, it is required that the floor to ceiling range for every corner ++ * not intersect the APM threshold voltage. This function adjusts the floor to ++ * ceiling range for each corner which violates this requirement. ++ * ++ * The following algorithm is applied: ++ * if floor < threshold <= ceiling: ++ * if open_loop >= threshold, then floor = threshold - adj ++ * else ceiling = threshold - step ++ * where: ++ * adj = APM hysteresis voltage established to minimize the number of ++ * corners with artificially increased floor voltages ++ * step = voltage in microvolts of a single step of the VDD supply ++ * ++ * The open-loop voltage is also bounded by the new floor or ceiling value as ++ * needed. ++ * ++ * Return: none ++ */ ++void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ int i, adj, threshold, prev_ceiling, prev_floor, prev_open_loop; ++ ++ if (!ctrl->apm_threshold_volt) { ++ /* APM not being used. */ ++ return; ++ } ++ ++ ctrl->apm_threshold_volt = CPR3_ROUND(ctrl->apm_threshold_volt, ++ ctrl->step_volt); ++ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt); ++ ++ threshold = ctrl->apm_threshold_volt; ++ adj = ctrl->apm_adj_volt; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ ++ if (threshold <= corner->floor_volt ++ || threshold > corner->ceiling_volt) ++ continue; ++ ++ prev_floor = corner->floor_volt; ++ prev_ceiling = corner->ceiling_volt; ++ prev_open_loop = corner->open_loop_volt; ++ ++ if (corner->open_loop_volt >= threshold) { ++ corner->floor_volt = max(corner->floor_volt, ++ threshold - adj); ++ if (corner->open_loop_volt < corner->floor_volt) ++ corner->open_loop_volt = corner->floor_volt; ++ } else { ++ corner->ceiling_volt = threshold - ctrl->step_volt; ++ } ++ ++ if (corner->floor_volt != prev_floor ++ || corner->ceiling_volt != prev_ceiling ++ || corner->open_loop_volt != prev_open_loop) ++ cpr3_debug(vreg, "APM threshold=%d, APM adj=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n", ++ threshold, adj, i, prev_floor, prev_ceiling, ++ prev_open_loop, corner->floor_volt, ++ corner->ceiling_volt, corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cprh_adjust_voltages_for_mem_acc() - adjust per-corner floor and ceiling ++ * voltages so that they do not intersect the MEM ACC threshold ++ * voltage ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * The following algorithm is applied: ++ * if floor < threshold <= ceiling: ++ * if open_loop >= threshold, then floor = threshold ++ * else ceiling = threshold - step ++ * where: ++ * step = voltage in microvolts of a single step of the VDD supply ++ * ++ * The open-loop voltage is also bounded by the new floor or ceiling value as ++ * needed. ++ * ++ * Return: none ++ */ ++void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ int i, threshold, prev_ceiling, prev_floor, prev_open_loop; ++ ++ if (!ctrl->mem_acc_threshold_volt) { ++ /* MEM ACC not being used. */ ++ return; ++ } ++ ++ ctrl->mem_acc_threshold_volt = CPR3_ROUND(ctrl->mem_acc_threshold_volt, ++ ctrl->step_volt); ++ ++ threshold = ctrl->mem_acc_threshold_volt; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ ++ if (threshold <= corner->floor_volt ++ || threshold > corner->ceiling_volt) ++ continue; ++ ++ prev_floor = corner->floor_volt; ++ prev_ceiling = corner->ceiling_volt; ++ prev_open_loop = corner->open_loop_volt; ++ ++ if (corner->open_loop_volt >= threshold) { ++ corner->floor_volt = max(corner->floor_volt, threshold); ++ if (corner->open_loop_volt < corner->floor_volt) ++ corner->open_loop_volt = corner->floor_volt; ++ } else { ++ corner->ceiling_volt = threshold - ctrl->step_volt; ++ } ++ ++ if (corner->floor_volt != prev_floor ++ || corner->ceiling_volt != prev_ceiling ++ || corner->open_loop_volt != prev_open_loop) ++ cpr3_debug(vreg, "MEM ACC threshold=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n", ++ threshold, i, prev_floor, prev_ceiling, ++ prev_open_loop, corner->floor_volt, ++ corner->ceiling_volt, corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cpr3_apply_closed_loop_offset_voltages() - modify the closed-loop voltage ++ * adjustments by the amounts that are needed for this ++ * fuse combo ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Array of closed-loop voltage adjustment values of length ++ * vreg->corner_count which is further adjusted based upon ++ * offset voltage fuse values. ++ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length ++ * vreg->fuse_corner_count. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_apply_closed_loop_offset_voltages(struct cpr3_regulator *vreg, ++ int *volt_adjust, int *fuse_volt_adjust) ++{ ++ u32 *corner_map; ++ int rc = 0, i; ++ ++ if (!of_find_property(vreg->of_node, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL)) { ++ /* No closed-loop offset required. */ ++ return 0; ++ } ++ ++ corner_map = kcalloc(vreg->corner_count, sizeof(*corner_map), ++ GFP_KERNEL); ++ if (!corner_map) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", ++ 1, corner_map); ++ if (rc) ++ goto done; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (corner_map[i] == 0) { ++ continue; ++ } else if (corner_map[i] > vreg->fuse_corner_count) { ++ cpr3_err(vreg, "corner %d mapped to invalid fuse corner: %u\n", ++ i, corner_map[i]); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ volt_adjust[i] += fuse_volt_adjust[corner_map[i] - 1]; ++ } ++ ++done: ++ kfree(corner_map); ++ return rc; ++} ++ ++/** ++ * cpr3_enforce_inc_quotient_monotonicity() - Ensure that target quotients ++ * increase monotonically from lower to higher corners ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static void cpr3_enforce_inc_quotient_monotonicity(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ ++ for (i = 1; i < vreg->corner_count; i++) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] ++ && vreg->corner[i].target_quot[j] ++ < vreg->corner[i - 1].target_quot[j]) { ++ cpr3_debug(vreg, "corner %d RO%u target quot=%u < corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, j, ++ vreg->corner[i].target_quot[j], ++ i - 1, j, ++ vreg->corner[i - 1].target_quot[j], ++ i, j, ++ vreg->corner[i - 1].target_quot[j]); ++ vreg->corner[i].target_quot[j] ++ = vreg->corner[i - 1].target_quot[j]; ++ } ++ } ++ } ++} ++ ++/** ++ * cpr3_enforce_dec_quotient_monotonicity() - Ensure that target quotients ++ * decrease monotonically from higher to lower corners ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static void cpr3_enforce_dec_quotient_monotonicity(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ ++ for (i = vreg->corner_count - 2; i >= 0; i--) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i + 1].target_quot[j] ++ && vreg->corner[i].target_quot[j] ++ > vreg->corner[i + 1].target_quot[j]) { ++ cpr3_debug(vreg, "corner %d RO%u target quot=%u > corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, j, ++ vreg->corner[i].target_quot[j], ++ i + 1, j, ++ vreg->corner[i + 1].target_quot[j], ++ i, j, ++ vreg->corner[i + 1].target_quot[j]); ++ vreg->corner[i].target_quot[j] ++ = vreg->corner[i + 1].target_quot[j]; ++ } ++ } ++ } ++} ++ ++/** ++ * _cpr3_adjust_target_quotients() - adjust the target quotients for each ++ * corner of the regulator according to input adjustment and ++ * scaling arrays ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Pointer to an array of closed-loop voltage adjustments ++ * with units of microvolts. The array must have ++ * vreg->corner_count number of elements. ++ * @ro_scale: Pointer to a flattened 2D array of RO scaling factors. ++ * The array must have an inner dimension of CPR3_RO_COUNT ++ * and an outer dimension of vreg->corner_count ++ * @label: Null terminated string providing a label for the type ++ * of adjustment. ++ * ++ * Return: true if any corners received a positive voltage adjustment (> 0), ++ * else false ++ */ ++static bool _cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ const int *volt_adjust, const int *ro_scale, const char *label) ++{ ++ int i, j, quot_adjust; ++ bool is_increasing = false; ++ u32 prev_quot; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j]) { ++ quot_adjust = cpr3_quot_adjustment( ++ ro_scale[i * CPR3_RO_COUNT + j], ++ volt_adjust[i]); ++ if (quot_adjust) { ++ prev_quot = vreg->corner[i]. ++ target_quot[j]; ++ vreg->corner[i].target_quot[j] ++ += quot_adjust; ++ cpr3_debug(vreg, "adjusted corner %d RO%d target quot %s: %u --> %u (%d uV)\n", ++ i, j, label, prev_quot, ++ vreg->corner[i].target_quot[j], ++ volt_adjust[i]); ++ } ++ } ++ } ++ if (volt_adjust[i] > 0) ++ is_increasing = true; ++ } ++ ++ return is_increasing; ++} ++ ++/** ++ * cpr3_adjust_target_quotients() - adjust the target quotients for each ++ * corner according to device tree values and fuse values ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length ++ * vreg->fuse_corner_count. This parameter could be null ++ * pointer when no fused adjustments are needed. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust) ++{ ++ int i, rc; ++ int *volt_adjust, *ro_scale; ++ bool explicit_adjustment, fused_adjustment, is_increasing; ++ ++ explicit_adjustment = of_find_property(vreg->of_node, ++ "qcom,cpr-closed-loop-voltage-adjustment", NULL); ++ fused_adjustment = of_find_property(vreg->of_node, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL); ++ ++ if (!explicit_adjustment && !fused_adjustment && !vreg->aging_allowed) { ++ /* No adjustment required. */ ++ return 0; ++ } else if (!of_find_property(vreg->of_node, ++ "qcom,cpr-ro-scaling-factor", NULL)) { ++ cpr3_err(vreg, "qcom,cpr-ro-scaling-factor is required for closed-loop voltage adjustment, but is missing\n"); ++ return -EINVAL; ++ } ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ ro_scale = kcalloc(vreg->corner_count * CPR3_RO_COUNT, ++ sizeof(*ro_scale), GFP_KERNEL); ++ if (!volt_adjust || !ro_scale) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-ro-scaling-factor", CPR3_RO_COUNT, ro_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ memcpy(vreg->corner[i].ro_scale, &ro_scale[i * CPR3_RO_COUNT], ++ sizeof(*ro_scale) * CPR3_RO_COUNT); ++ ++ if (explicit_adjustment) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-closed-loop-voltage-adjustment", ++ 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ _cpr3_adjust_target_quotients(vreg, volt_adjust, ro_scale, ++ "from DT"); ++ cpr3_enforce_inc_quotient_monotonicity(vreg); ++ } ++ ++ if (fused_adjustment && fuse_volt_adjust) { ++ memset(volt_adjust, 0, ++ sizeof(*volt_adjust) * vreg->corner_count); ++ ++ rc = cpr3_apply_closed_loop_offset_voltages(vreg, volt_adjust, ++ fuse_volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not apply fused closed-loop voltage reductions, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ is_increasing = _cpr3_adjust_target_quotients(vreg, volt_adjust, ++ ro_scale, "from fuse"); ++ if (is_increasing) ++ cpr3_enforce_inc_quotient_monotonicity(vreg); ++ else ++ cpr3_enforce_dec_quotient_monotonicity(vreg); ++ } ++ ++done: ++ kfree(volt_adjust); ++ kfree(ro_scale); ++ return rc; ++} +--- /dev/null ++++ b/drivers/regulator/cpr4-apss-regulator.c +@@ -0,0 +1,1819 @@ ++/* ++ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include <linux/bitops.h> ++#include <linux/debugfs.h> ++#include <linux/err.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/list.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/platform_device.h> ++#include <linux/pm_opp.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/uaccess.h> ++#include <linux/regulator/driver.h> ++#include <linux/regulator/machine.h> ++#include <linux/regulator/of_regulator.h> ++ ++#include "cpr3-regulator.h" ++ ++#define IPQ807x_APSS_FUSE_CORNERS 4 ++#define IPQ817x_APPS_FUSE_CORNERS 2 ++#define IPQ6018_APSS_FUSE_CORNERS 4 ++#define IPQ9574_APSS_FUSE_CORNERS 4 ++ ++u32 g_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS; ++ ++/** ++ * struct cpr4_ipq807x_apss_fuses - APSS specific fuse data for IPQ807x ++ * @ro_sel: Ring oscillator select fuse parameter value for each ++ * fuse corner ++ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value ++ * for each fuse corner (raw, not converted to a voltage) ++ * @target_quot: CPR target quotient fuse parameter value for each fuse ++ * corner ++ * @quot_offset: CPR target quotient offset fuse parameter value for each ++ * fuse corner (raw, not unpacked) used for target quotient ++ * interpolation ++ * @speed_bin: Application processor speed bin fuse parameter value for ++ * the given chip ++ * @cpr_fusing_rev: CPR fusing revision fuse parameter value ++ * @boost_cfg: CPR boost configuration fuse parameter value ++ * @boost_voltage: CPR boost voltage fuse parameter value (raw, not ++ * converted to a voltage) ++ * ++ * This struct holds the values for all of the fuses read from memory. ++ */ ++struct cpr4_ipq807x_apss_fuses { ++ u64 ro_sel[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 init_voltage[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 target_quot[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 quot_offset[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 speed_bin; ++ u64 cpr_fusing_rev; ++ u64 boost_cfg; ++ u64 boost_voltage; ++ u64 misc; ++}; ++ ++/* ++ * fuse combo = fusing revision + 8 * (speed bin) ++ * where: fusing revision = 0 - 7 and speed bin = 0 - 7 ++ */ ++#define CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT 64 ++ ++/* ++ * Constants which define the name of each fuse corner. ++ */ ++enum cpr4_ipq807x_apss_fuse_corner { ++ CPR4_IPQ807x_APSS_FUSE_CORNER_SVS = 0, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_NOM = 1, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO = 2, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO = 3, ++}; ++ ++static const char * const cpr4_ipq807x_apss_fuse_corner_name[] = { ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_SVS] = "SVS", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_NOM] = "NOM", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO] = "TURBO", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO] = "STURBO", ++}; ++ ++/* ++ * IPQ807x APSS fuse parameter locations: ++ * ++ * Structs are organized with the following dimensions: ++ * Outer: 0 to 3 for fuse corners from lowest to highest corner ++ * Inner: large enough to hold the longest set of parameter segments which ++ * fully defines a fuse parameter, +1 (for NULL termination). ++ * Each segment corresponds to a contiguous group of bits from a ++ * single fuse row. These segments are concatentated together in ++ * order to form the full fuse parameter value. The segments for ++ * a given parameter may correspond to different fuse rows. ++ */ ++static struct cpr3_fuse_param ++ipq807x_apss_ro_sel_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{73, 8, 11}, {} }, ++ {{73, 4, 7}, {} }, ++ {{73, 0, 3}, {} }, ++ {{73, 12, 15}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_init_voltage_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{71, 18, 23}, {} }, ++ {{71, 12, 17}, {} }, ++ {{71, 6, 11}, {} }, ++ {{71, 0, 5}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_target_quot_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{72, 32, 43}, {} }, ++ {{72, 20, 31}, {} }, ++ {{72, 8, 19}, {} }, ++ {{72, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_quot_offset_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{71, 46, 52}, {} }, ++ {{71, 39, 45}, {} }, ++ {{71, 32, 38}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq807x_cpr_fusing_rev_param[] = { ++ {71, 53, 55}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_apss_speed_bin_param[] = { ++ {36, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_cpr_boost_fuse_cfg_param[] = { ++ {36, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_apss_boost_fuse_volt_param[] = { ++ {71, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_misc_fuse_volt_adj_param[] = { ++ {36, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq807x_fuse_params = { ++ .apss_ro_sel_param = ipq807x_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq807x_apss_init_voltage_param, ++ .apss_target_quot_param = ipq807x_apss_target_quot_param, ++ .apss_quot_offset_param = ipq807x_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq807x_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq807x_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq807x_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq807x_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq807x_misc_fuse_volt_adj_param ++}; ++ ++/* ++ * The number of possible values for misc fuse is ++ * 2^(#bits defined for misc fuse) ++ */ ++#define IPQ807x_MISC_FUSE_VAL_COUNT BIT(1) ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ipq807x_apss_fuse_ref_volt ++ [IPQ807x_APSS_FUSE_CORNERS] = { ++ 720000, ++ 864000, ++ 992000, ++ 1064000, ++}; ++ ++#define IPQ807x_APSS_FUSE_STEP_VOLT 8000 ++#define IPQ807x_APSS_VOLTAGE_FUSE_SIZE 6 ++#define IPQ807x_APSS_QUOT_OFFSET_SCALE 5 ++ ++#define IPQ807x_APSS_CPR_SENSOR_COUNT 6 ++ ++#define IPQ807x_APSS_CPR_CLOCK_RATE 19200000 ++ ++#define IPQ807x_APSS_MAX_TEMP_POINTS 3 ++#define IPQ807x_APSS_TEMP_SENSOR_ID_START 4 ++#define IPQ807x_APSS_TEMP_SENSOR_ID_END 13 ++/* ++ * Boost voltage fuse reference and ceiling voltages in microvolts for ++ * IPQ807x. ++ */ ++#define IPQ807x_APSS_BOOST_FUSE_REF_VOLT 1140000 ++#define IPQ807x_APSS_BOOST_CEILING_VOLT 1140000 ++#define IPQ807x_APSS_BOOST_FLOOR_VOLT 900000 ++#define MAX_BOOST_CONFIG_FUSE_VALUE 8 ++ ++#define IPQ807x_APSS_CPR_SDELTA_CORE_COUNT 15 ++ ++#define IPQ807x_APSS_CPR_TCSR_START 8 ++#define IPQ807x_APSS_CPR_TCSR_END 9 ++ ++/* ++ * Array of integer values mapped to each of the boost config fuse values to ++ * indicate boost enable/disable status. ++ */ ++static bool boost_fuse[MAX_BOOST_CONFIG_FUSE_VALUE] = {0, 1, 1, 1, 1, 1, 1, 1}; ++ ++/* ++ * IPQ6018 (Few parameters are changed, remaining are same as IPQ807x) ++ */ ++#define IPQ6018_APSS_FUSE_STEP_VOLT 12500 ++#define IPQ6018_APSS_CPR_CLOCK_RATE 24000000 ++ ++static struct cpr3_fuse_param ++ipq6018_apss_ro_sel_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{75, 8, 11}, {} }, ++ {{75, 4, 7}, {} }, ++ {{75, 0, 3}, {} }, ++ {{75, 12, 15}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_init_voltage_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{73, 18, 23}, {} }, ++ {{73, 12, 17}, {} }, ++ {{73, 6, 11}, {} }, ++ {{73, 0, 5}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_target_quot_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{74, 32, 43}, {} }, ++ {{74, 20, 31}, {} }, ++ {{74, 8, 19}, {} }, ++ {{74, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_quot_offset_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{73, 48, 55}, {} }, ++ {{73, 40, 47}, {} }, ++ {{73, 32, 39}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq6018_cpr_fusing_rev_param[] = { ++ {75, 16, 18}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_apss_speed_bin_param[] = { ++ {36, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_cpr_boost_fuse_cfg_param[] = { ++ {36, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_apss_boost_fuse_volt_param[] = { ++ {73, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_misc_fuse_volt_adj_param[] = { ++ {36, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq6018_fuse_params = { ++ .apss_ro_sel_param = ipq6018_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq6018_apss_init_voltage_param, ++ .apss_target_quot_param = ipq6018_apss_target_quot_param, ++ .apss_quot_offset_param = ipq6018_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq6018_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq6018_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq6018_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq6018_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq6018_misc_fuse_volt_adj_param ++}; ++ ++ ++/* ++ * Boost voltage fuse reference and ceiling voltages in microvolts for ++ * IPQ6018. ++ */ ++#define IPQ6018_APSS_BOOST_FUSE_REF_VOLT 1140000 ++#define IPQ6018_APSS_BOOST_CEILING_VOLT 1140000 ++#define IPQ6018_APSS_BOOST_FLOOR_VOLT 900000 ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ipq6018_apss_fuse_ref_volt ++ [IPQ6018_APSS_FUSE_CORNERS] = { ++ 725000, ++ 862500, ++ 987500, ++ 1062500, ++}; ++ ++/* ++ * IPQ6018 Memory ACC settings on TCSR ++ * ++ * Turbo_L1: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x10 ++ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x1 ++ * Other modes: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x0 ++ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x0 ++ * ++ */ ++#define IPQ6018_APSS_MEM_ACC_TCSR_COUNT 2 ++#define TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x1946178 ++#define TCSR_CUSTOM_VDDAPC0_ACC_1 0x1946124 ++ ++struct mem_acc_tcsr { ++ u32 phy_addr; ++ void __iomem *ioremap_addr; ++ u32 value; ++}; ++ ++static struct mem_acc_tcsr ipq6018_mem_acc_tcsr[IPQ6018_APSS_MEM_ACC_TCSR_COUNT] = { ++ {TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0, NULL, 0x10}, ++ {TCSR_CUSTOM_VDDAPC0_ACC_1, NULL, 0x1}, ++}; ++ ++/* ++ * IPQ9574 (Few parameters are changed, remaining are same as IPQ6018) ++ */ ++#define IPQ9574_APSS_FUSE_STEP_VOLT 10000 ++ ++static struct cpr3_fuse_param ++ipq9574_apss_ro_sel_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{107, 4, 7}, {} }, ++ {{107, 0, 3}, {} }, ++ {{106, 4, 7}, {} }, ++ {{106, 0, 3}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_init_voltage_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{104, 24, 29}, {} }, ++ {{104, 18, 23}, {} }, ++ {{104, 12, 17}, {} }, ++ {{104, 6, 11}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_target_quot_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{106, 32, 43}, {} }, ++ {{106, 20, 31}, {} }, ++ {{106, 8, 19}, {} }, ++ {{106, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_quot_offset_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{105, 48, 55}, {} }, ++ {{105, 40, 47}, {} }, ++ {{105, 32, 39}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq9574_cpr_fusing_rev_param[] = { ++ {107, 8, 10}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_apss_speed_bin_param[] = { ++ {0, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_cpr_boost_fuse_cfg_param[] = { ++ {0, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_apss_boost_fuse_volt_param[] = { ++ {104, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_misc_fuse_volt_adj_param[] = { ++ {0, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq9574_fuse_params = { ++ .apss_ro_sel_param = ipq9574_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq9574_apss_init_voltage_param, ++ .apss_target_quot_param = ipq9574_apss_target_quot_param, ++ .apss_quot_offset_param = ipq9574_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq9574_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq9574_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq9574_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq9574_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq9574_misc_fuse_volt_adj_param ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ9574 ++ */ ++static int ipq9574_apss_fuse_ref_volt ++ [IPQ9574_APSS_FUSE_CORNERS] = { ++ 725000, ++ 862500, ++ 987500, ++ 1062500, ++}; ++ ++/** ++ * cpr4_ipq807x_apss_read_fuse_data() - load APSS specific fuse parameter values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function allocates a cpr4_ipq807x_apss_fuses struct, fills it with ++ * values read out of hardware fuses, and finally copies common fuse values ++ * into the CPR3 regulator struct. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_read_fuse_data(struct cpr3_regulator *vreg) ++{ ++ void __iomem *base = vreg->thread->ctrl->fuse_base; ++ struct cpr4_ipq807x_apss_fuses *fuse; ++ int i, rc; ++ ++ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL); ++ if (!fuse) ++ return -ENOMEM; ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->apss_speed_bin_param, ++ &fuse->speed_bin); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read speed bin fuse, rc=%d\n", rc); ++ return rc; ++ } ++ cpr3_info(vreg, "speed bin = %llu\n", fuse->speed_bin); ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_fusing_rev_param, ++ &fuse->cpr_fusing_rev); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read CPR fusing revision fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "CPR fusing revision = %llu\n", fuse->cpr_fusing_rev); ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->misc_fuse_volt_adj_param, ++ &fuse->misc); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read misc voltage adjustment fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "CPR misc fuse value = %llu\n", fuse->misc); ++ if (fuse->misc >= IPQ807x_MISC_FUSE_VAL_COUNT) { ++ cpr3_err(vreg, "CPR misc fuse value = %llu, should be < %lu\n", ++ fuse->misc, IPQ807x_MISC_FUSE_VAL_COUNT); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < g_valid_fuse_count; i++) { ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_init_voltage_param[i], ++ &fuse->init_voltage[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_target_quot_param[i], ++ &fuse->target_quot[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d target quotient fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_ro_sel_param[i], ++ &fuse->ro_sel[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d RO select fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_quot_offset_param[i], ++ &fuse->quot_offset[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d quotient offset fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_boost_fuse_cfg_param, ++ &fuse->boost_cfg); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read CPR boost config fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "Voltage boost fuse config = %llu boost = %s\n", ++ fuse->boost_cfg, boost_fuse[fuse->boost_cfg] ++ ? "enable" : "disable"); ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_boost_fuse_volt_param, ++ &fuse->boost_voltage); ++ if (rc) { ++ cpr3_err(vreg, "failed to read boost fuse voltage, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ vreg->fuse_combo = fuse->cpr_fusing_rev + 8 * fuse->speed_bin; ++ if (vreg->fuse_combo >= CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT) { ++ cpr3_err(vreg, "invalid CPR fuse combo = %d found\n", ++ vreg->fuse_combo); ++ return -EINVAL; ++ } ++ ++ vreg->speed_bin_fuse = fuse->speed_bin; ++ vreg->cpr_rev_fuse = fuse->cpr_fusing_rev; ++ vreg->fuse_corner_count = g_valid_fuse_count; ++ vreg->platform_fuses = fuse; ++ ++ return 0; ++} ++ ++/** ++ * cpr4_apss_parse_corner_data() - parse APSS corner data from device tree ++ * properties of the CPR3 regulator's device node ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_corner_data(struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ u32 *temp = NULL; ++ int i, rc; ++ ++ rc = cpr3_parse_common_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ /* If fuse has incorrect RO Select values and dtsi has "qcom,cpr-ro-sel" ++ * entry with RO select values other than zero, then dtsi values will ++ * be used. ++ */ ++ if (of_find_property(node, "qcom,cpr-ro-sel", NULL)) { ++ temp = kcalloc(vreg->fuse_corner_count, sizeof(*temp), ++ GFP_KERNEL); ++ if (!temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, "qcom,cpr-ro-sel", ++ vreg->fuse_corner_count, temp); ++ if (rc) ++ goto done; ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (temp[i] != 0) ++ fuse->ro_sel[i] = temp[i]; ++ } ++ } ++done: ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_parse_misc_fuse_voltage_adjustments() - fill an array from a ++ * portion of the voltage adjustments specified based on ++ * miscellaneous fuse bits. ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Voltage adjustment output data array which must be ++ * of size vreg->corner_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that speed bin size elements are initialized. ++ * ++ * Two formats are supported for the device tree property: ++ * 1. Length == tuple_list_size * vreg->corner_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_list_size * vreg->speed_bin_corner_sum ++ * (reading begins at index tuple_list_size * vreg->speed_bin_offset) ++ * ++ * Here, tuple_list_size is the number of possible values for misc fuse. ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_misc_fuse_voltage_adjustments( ++ struct cpr3_regulator *vreg, u32 *volt_adjust) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ int tuple_list_size = IPQ807x_MISC_FUSE_VAL_COUNT; ++ int i, offset, rc, len = 0; ++ const char *prop_name = "qcom,cpr-misc-fuse-voltage-adjustment"; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_list_size * vreg->corner_count * sizeof(u32)) { ++ offset = 0; ++ } else if (vreg->speed_bin_corner_sum > 0 && ++ len == tuple_list_size * vreg->speed_bin_corner_sum ++ * sizeof(u32)) { ++ offset = tuple_list_size * vreg->speed_bin_offset ++ + fuse->misc * vreg->corner_count; ++ } else { ++ if (vreg->speed_bin_corner_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_list_size * vreg->corner_count ++ * sizeof(u32), ++ tuple_list_size * vreg->speed_bin_corner_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu\n", ++ prop_name, len, ++ tuple_list_size * vreg->corner_count ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &volt_adjust[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_ipq807x_apss_calculate_open_loop_voltages() - calculate the open-loop ++ * voltage for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * If open-loop voltage interpolation is allowed in device tree, then ++ * this function calculates the open-loop voltage for a given corner using ++ * linear interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with their fused ++ * open-loop voltages. ++ * ++ * If open-loop voltage interpolation is not allowed, then this function uses ++ * the Fmax fused open-loop voltage for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_calculate_open_loop_voltages( ++ struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int i, j, rc = 0; ++ bool allow_interpolation; ++ u64 freq_low, volt_low, freq_high, volt_high; ++ int *fuse_volt, *misc_adj_volt; ++ int *fmax_corner; ++ ++ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ if (!fuse_volt || !fmax_corner) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (ctrl->cpr_global_setting == CPR_DISABLED) ++ fuse_volt[i] = vreg->cpr4_regulator_data->fuse_ref_volt[i]; ++ else ++ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr4_regulator_data->fuse_ref_volt[i], ++ vreg->cpr4_regulator_data->fuse_step_volt, ++ fuse->init_voltage[i], ++ IPQ807x_APSS_VOLTAGE_FUSE_SIZE); ++ ++ /* Log fused open-loop voltage values for debugging purposes. */ ++ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n", ++ cpr4_ipq807x_apss_fuse_corner_name[i], ++ fuse_volt[i]); ++ } ++ ++ rc = cpr3_determine_part_type(vreg, ++ fuse_volt[vreg->fuse_corner_count - 1]); ++ if (rc) { ++ cpr3_err(vreg, "fused part type detection failed failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, "fused open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ allow_interpolation = of_property_read_bool(node, ++ "qcom,allow-voltage-interpolation"); ++ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ if (fuse_volt[i] < fuse_volt[i - 1]) { ++ cpr3_info(vreg, "fuse corner %d voltage=%d uV < fuse corner %d voltage=%d uV; overriding: fuse corner %d voltage=%d\n", ++ i, fuse_volt[i], i - 1, fuse_volt[i - 1], ++ i, fuse_volt[i - 1]); ++ fuse_volt[i] = fuse_volt[i - 1]; ++ } ++ } ++ ++ if (!allow_interpolation) { ++ /* Use fused open-loop voltage for lower frequencies. */ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].open_loop_volt ++ = fuse_volt[vreg->corner[i].cpr_fuse_corner]; ++ goto done; ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ for (i = 0; i <= fmax_corner[0]; i++) ++ vreg->corner[i].open_loop_volt = fuse_volt[0]; ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ volt_low = fuse_volt[i - 1]; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ volt_high = fuse_volt[i]; ++ ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].open_loop_volt = cpr3_interpolate( ++ freq_low, volt_low, freq_high, volt_high, ++ vreg->corner[j].proc_freq); ++ } ++ ++done: ++ if (rc == 0) { ++ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n"); ++ for (i = 0; i < vreg->corner_count; i++) ++ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i, ++ vreg->corner[i].open_loop_volt); ++ ++ rc = cpr3_adjust_open_loop_voltages(vreg); ++ if (rc) ++ cpr3_err(vreg, "open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ ++ if (of_find_property(node, ++ "qcom,cpr-misc-fuse-voltage-adjustment", ++ NULL)) { ++ misc_adj_volt = kcalloc(vreg->corner_count, ++ sizeof(*misc_adj_volt), GFP_KERNEL); ++ if (!misc_adj_volt) { ++ rc = -ENOMEM; ++ goto _exit; ++ } ++ ++ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg, ++ misc_adj_volt); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n", ++ rc); ++ kfree(misc_adj_volt); ++ goto _exit; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].open_loop_volt ++ += misc_adj_volt[i]; ++ kfree(misc_adj_volt); ++ } ++ } ++ ++_exit: ++ kfree(fuse_volt); ++ kfree(fmax_corner); ++ return rc; ++} ++ ++/** ++ * cpr4_ipq807x_apss_set_no_interpolation_quotients() - use the fused target ++ * quotient values for lower frequencies. ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Pointer to array of per-corner closed-loop adjustment ++ * voltages ++ * @volt_adjust_fuse: Pointer to array of per-fuse-corner closed-loop ++ * adjustment voltages ++ * @ro_scale: Pointer to array of per-fuse-corner RO scaling factor ++ * values with units of QUOT/V ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_set_no_interpolation_quotients( ++ struct cpr3_regulator *vreg, int *volt_adjust, ++ int *volt_adjust_fuse, int *ro_scale) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ u32 quot, ro; ++ int quot_adjust; ++ int i, fuse_corner; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ fuse_corner = vreg->corner[i].cpr_fuse_corner; ++ quot = fuse->target_quot[fuse_corner]; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner], ++ volt_adjust_fuse[fuse_corner] + ++ volt_adjust[i]); ++ ro = fuse->ro_sel[fuse_corner]; ++ vreg->corner[i].target_quot[ro] = quot + quot_adjust; ++ cpr3_debug(vreg, "corner=%d RO=%u target quot=%u\n", ++ i, ro, quot); ++ ++ if (quot_adjust) ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %u --> %u (%d uV)\n", ++ i, ro, quot, vreg->corner[i].target_quot[ro], ++ volt_adjust_fuse[fuse_corner] + ++ volt_adjust[i]); ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_ipq807x_apss_calculate_target_quotients() - calculate the CPR target ++ * quotient for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * If target quotient interpolation is allowed in device tree, then this ++ * function calculates the target quotient for a given corner using linear ++ * interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with the fused ++ * target quotient and quotient offset of the higher Fmax corner. ++ * ++ * If target quotient interpolation is not allowed, then this function uses ++ * the Fmax fused target quotient for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_calculate_target_quotients( ++ struct cpr3_regulator *vreg) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ int rc; ++ bool allow_interpolation; ++ u64 freq_low, freq_high, prev_quot; ++ u64 *quot_low; ++ u64 *quot_high; ++ u32 quot, ro; ++ int i, j, fuse_corner, quot_adjust; ++ int *fmax_corner; ++ int *volt_adjust, *volt_adjust_fuse, *ro_scale; ++ int *voltage_adj_misc; ++ ++ /* Log fused quotient values for debugging purposes. */ ++ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS; ++ i < vreg->fuse_corner_count; i++) ++ cpr3_info(vreg, "fused %8s: quot[%2llu]=%4llu, quot_offset[%2llu]=%4llu\n", ++ cpr4_ipq807x_apss_fuse_corner_name[i], ++ fuse->ro_sel[i], fuse->target_quot[i], ++ fuse->ro_sel[i], fuse->quot_offset[i] * ++ IPQ807x_APSS_QUOT_OFFSET_SCALE); ++ ++ allow_interpolation = of_property_read_bool(vreg->of_node, ++ "qcom,allow-quotient-interpolation"); ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ volt_adjust_fuse = kcalloc(vreg->fuse_corner_count, ++ sizeof(*volt_adjust_fuse), GFP_KERNEL); ++ ro_scale = kcalloc(vreg->fuse_corner_count, sizeof(*ro_scale), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ quot_low = kcalloc(vreg->fuse_corner_count, sizeof(*quot_low), ++ GFP_KERNEL); ++ quot_high = kcalloc(vreg->fuse_corner_count, sizeof(*quot_high), ++ GFP_KERNEL); ++ if (!volt_adjust || !volt_adjust_fuse || !ro_scale || ++ !fmax_corner || !quot_low || !quot_high) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_closed_loop_voltage_adjustments(vreg, &fuse->ro_sel[0], ++ volt_adjust, volt_adjust_fuse, ro_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-misc-fuse-voltage-adjustment", NULL)) { ++ voltage_adj_misc = kcalloc(vreg->corner_count, ++ sizeof(*voltage_adj_misc), GFP_KERNEL); ++ if (!voltage_adj_misc) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg, ++ voltage_adj_misc); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n", ++ rc); ++ kfree(voltage_adj_misc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ volt_adjust[i] += voltage_adj_misc[i]; ++ ++ kfree(voltage_adj_misc); ++ } ++ ++ if (!allow_interpolation) { ++ /* Use fused target quotients for lower frequencies. */ ++ return cpr4_ipq807x_apss_set_no_interpolation_quotients( ++ vreg, volt_adjust, volt_adjust_fuse, ro_scale); ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[i], volt_adjust_fuse[i]); ++ quot = fuse->target_quot[i] + quot_adjust; ++ quot_high[i] = quot_low[i] = quot; ++ ro = fuse->ro_sel[i]; ++ if (quot_adjust) ++ cpr3_debug(vreg, "adjusted fuse corner %d RO%u target quot: %llu --> %u (%d uV)\n", ++ i, ro, fuse->target_quot[i], quot, volt_adjust_fuse[i]); ++ ++ for (i = 0; i <= fmax_corner[CPR4_IPQ807x_APSS_FUSE_CORNER_SVS]; ++ i++) ++ vreg->corner[i].target_quot[ro] = quot; ++ ++ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_NOM; ++ i < vreg->fuse_corner_count; i++) { ++ quot_high[i] = fuse->target_quot[i]; ++ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1]) ++ quot_low[i] = quot_high[i - 1]; ++ else ++ quot_low[i] = quot_high[i] ++ - fuse->quot_offset[i] ++ * IPQ807x_APSS_QUOT_OFFSET_SCALE; ++ if (quot_high[i] < quot_low[i]) { ++ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu; overriding: quot_high[%d]=%llu\n", ++ i, quot_high[i], i, quot_low[i], ++ i, quot_low[i]); ++ quot_high[i] = quot_low[i]; ++ } ++ } ++ ++ /* Perform per-fuse-corner target quotient adjustment */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ quot_adjust = cpr3_quot_adjustment(ro_scale[i], ++ volt_adjust_fuse[i]); ++ if (quot_adjust) { ++ prev_quot = quot_high[i]; ++ quot_high[i] += quot_adjust; ++ cpr3_debug(vreg, "adjusted fuse corner %d RO%llu target quot: %llu --> %llu (%d uV)\n", ++ i, fuse->ro_sel[i], prev_quot, quot_high[i], ++ volt_adjust_fuse[i]); ++ } ++ ++ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1]) ++ quot_low[i] = quot_high[i - 1]; ++ else ++ quot_low[i] += cpr3_quot_adjustment(ro_scale[i], ++ volt_adjust_fuse[i - 1]); ++ ++ if (quot_high[i] < quot_low[i]) { ++ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu after adjustment; overriding: quot_high[%d]=%llu\n", ++ i, quot_high[i], i, quot_low[i], ++ i, quot_low[i]); ++ quot_high[i] = quot_low[i]; ++ } ++ } ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ ++ ro = fuse->ro_sel[i]; ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].target_quot[ro] = cpr3_interpolate( ++ freq_low, quot_low[i], freq_high, quot_high[i], ++ vreg->corner[j].proc_freq); ++ } ++ ++ /* Perform per-corner target quotient adjustment */ ++ for (i = 0; i < vreg->corner_count; i++) { ++ fuse_corner = vreg->corner[i].cpr_fuse_corner; ++ ro = fuse->ro_sel[fuse_corner]; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner], ++ volt_adjust[i]); ++ if (quot_adjust) { ++ prev_quot = vreg->corner[i].target_quot[ro]; ++ vreg->corner[i].target_quot[ro] += quot_adjust; ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %llu --> %u (%d uV)\n", ++ i, ro, prev_quot, ++ vreg->corner[i].target_quot[ro], ++ volt_adjust[i]); ++ } ++ } ++ ++ /* Ensure that target quotients increase monotonically */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ ro = fuse->ro_sel[vreg->corner[i].cpr_fuse_corner]; ++ if (fuse->ro_sel[vreg->corner[i - 1].cpr_fuse_corner] == ro ++ && vreg->corner[i].target_quot[ro] ++ < vreg->corner[i - 1].target_quot[ro]) { ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot=%u < adjusted corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, ro, vreg->corner[i].target_quot[ro], ++ i - 1, ro, vreg->corner[i - 1].target_quot[ro], ++ i, ro, vreg->corner[i - 1].target_quot[ro]); ++ vreg->corner[i].target_quot[ro] ++ = vreg->corner[i - 1].target_quot[ro]; ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ kfree(volt_adjust_fuse); ++ kfree(ro_scale); ++ kfree(fmax_corner); ++ kfree(quot_low); ++ kfree(quot_high); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_print_settings() - print out APSS CPR configuration settings into ++ * the kernel log for debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++static void cpr4_apss_print_settings(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_corner *corner; ++ int i; ++ ++ cpr3_debug(vreg, "Corner: Frequency (Hz), Fuse Corner, Floor (uV), Open-Loop (uV), Ceiling (uV)\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n", ++ i, corner->proc_freq, corner->cpr_fuse_corner, ++ corner->floor_volt, corner->open_loop_volt, ++ corner->ceiling_volt); ++ } ++ ++ if (vreg->thread->ctrl->apm) ++ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n", ++ vreg->thread->ctrl->apm_threshold_volt, ++ vreg->thread->ctrl->apm_adj_volt); ++} ++ ++/** ++ * cpr4_apss_init_thread() - perform steps necessary to initialize the ++ * configuration data for a CPR3 thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_thread(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_thread_data(thread); ++ if (rc) { ++ cpr3_err(thread->ctrl, "thread %u unable to read CPR thread data from device tree, rc=%d\n", ++ thread->thread_id, rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_apss_parse_temp_adj_properties() - parse temperature based ++ * adjustment properties from device tree. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_temp_adj_properties(struct cpr3_controller *ctrl) ++{ ++ struct device_node *of_node = ctrl->dev->of_node; ++ int rc, i, len, temp_point_count; ++ ++ if (!of_find_property(of_node, "qcom,cpr-temp-point-map", &len)) { ++ /* ++ * Temperature based adjustments are not defined. Single ++ * temperature band is still valid for per-online-core ++ * adjustments. ++ */ ++ ctrl->temp_band_count = 1; ++ return 0; ++ } ++ ++ temp_point_count = len / sizeof(u32); ++ if (temp_point_count <= 0 || ++ temp_point_count > IPQ807x_APSS_MAX_TEMP_POINTS) { ++ cpr3_err(ctrl, "invalid number of temperature points %d > %d (max)\n", ++ temp_point_count, IPQ807x_APSS_MAX_TEMP_POINTS); ++ return -EINVAL; ++ } ++ ++ ctrl->temp_points = devm_kcalloc(ctrl->dev, temp_point_count, ++ sizeof(*ctrl->temp_points), GFP_KERNEL); ++ if (!ctrl->temp_points) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(of_node, "qcom,cpr-temp-point-map", ++ ctrl->temp_points, temp_point_count); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-temp-point-map, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < temp_point_count; i++) ++ cpr3_debug(ctrl, "Temperature Point %d=%d\n", i, ++ ctrl->temp_points[i]); ++ ++ /* ++ * If t1, t2, and t3 are the temperature points, then the temperature ++ * bands are: (-inf, t1], (t1, t2], (t2, t3], and (t3, inf). ++ */ ++ ctrl->temp_band_count = temp_point_count + 1; ++ cpr3_debug(ctrl, "Number of temp bands =%d\n", ctrl->temp_band_count); ++ ++ rc = of_property_read_u32(of_node, "qcom,cpr-initial-temp-band", ++ &ctrl->initial_temp_band); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-initial-temp-band, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->initial_temp_band >= ctrl->temp_band_count) { ++ cpr3_err(ctrl, "Initial temperature band value %d should be in range [0 - %d]\n", ++ ctrl->initial_temp_band, ctrl->temp_band_count - 1); ++ return -EINVAL; ++ } ++ ++ ctrl->temp_sensor_id_start = IPQ807x_APSS_TEMP_SENSOR_ID_START; ++ ctrl->temp_sensor_id_end = IPQ807x_APSS_TEMP_SENSOR_ID_END; ++ ctrl->allow_temp_adj = true; ++ return rc; ++} ++ ++/** ++ * cpr4_apss_parse_boost_properties() - parse configuration data for boost ++ * voltage adjustment for CPR3 regulator from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_boost_properties(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_corner *corner; ++ int i, boost_voltage, final_boost_volt, rc = 0; ++ int *boost_table = NULL, *boost_temp_adj = NULL; ++ int boost_voltage_adjust = 0, boost_num_cores = 0; ++ u32 boost_allowed = 0; ++ ++ if (!boost_fuse[fuse->boost_cfg]) ++ /* Voltage boost is disabled in fuse */ ++ return 0; ++ ++ if (of_find_property(vreg->of_node, "qcom,allow-boost", NULL)) { ++ rc = cpr3_parse_array_property(vreg, "qcom,allow-boost", 1, ++ &boost_allowed); ++ if (rc) ++ return rc; ++ } ++ ++ if (!boost_allowed) { ++ /* Voltage boost is not enabled for this regulator */ ++ return 0; ++ } ++ ++ boost_voltage = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr4_regulator_data->boost_fuse_ref_volt, ++ vreg->cpr4_regulator_data->fuse_step_volt, ++ fuse->boost_voltage, ++ IPQ807x_APSS_VOLTAGE_FUSE_SIZE); ++ ++ /* Log boost voltage value for debugging purposes. */ ++ cpr3_info(vreg, "Boost open-loop=%7d uV\n", boost_voltage); ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-boost-voltage-fuse-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-boost-voltage-fuse-adjustment", ++ 1, &boost_voltage_adjust); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-boost-voltage-fuse-adjustment reading failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ boost_voltage += boost_voltage_adjust; ++ /* Log boost voltage value for debugging purposes. */ ++ cpr3_info(vreg, "Adjusted boost open-loop=%7d uV\n", ++ boost_voltage); ++ } ++ ++ /* Limit boost voltage value between ceiling and floor voltage limits */ ++ boost_voltage = min(boost_voltage, vreg->cpr4_regulator_data->boost_ceiling_volt); ++ boost_voltage = max(boost_voltage, vreg->cpr4_regulator_data->boost_floor_volt); ++ ++ /* ++ * The boost feature can only be used for the highest voltage corner. ++ * Also, keep core-count adjustments disabled when the boost feature ++ * is enabled. ++ */ ++ corner = &vreg->corner[vreg->corner_count - 1]; ++ if (!corner->sdelta) { ++ /* ++ * If core-count/temp adjustments are not defined, the cpr4 ++ * sdelta for this corner will not be allocated. Allocate it ++ * here for boost configuration. ++ */ ++ corner->sdelta = devm_kzalloc(ctrl->dev, ++ sizeof(*corner->sdelta), GFP_KERNEL); ++ if (!corner->sdelta) ++ return -ENOMEM; ++ } ++ corner->sdelta->temp_band_count = ctrl->temp_band_count; ++ ++ rc = of_property_read_u32(vreg->of_node, "qcom,cpr-num-boost-cores", ++ &boost_num_cores); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-num-boost-cores reading failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (boost_num_cores <= 0 || ++ boost_num_cores > IPQ807x_APSS_CPR_SDELTA_CORE_COUNT) { ++ cpr3_err(vreg, "Invalid boost number of cores = %d\n", ++ boost_num_cores); ++ return -EINVAL; ++ } ++ corner->sdelta->boost_num_cores = boost_num_cores; ++ ++ boost_table = devm_kcalloc(ctrl->dev, corner->sdelta->temp_band_count, ++ sizeof(*boost_table), GFP_KERNEL); ++ if (!boost_table) ++ return -ENOMEM; ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-boost-temp-adjustment", NULL)) { ++ boost_temp_adj = kcalloc(corner->sdelta->temp_band_count, ++ sizeof(*boost_temp_adj), GFP_KERNEL); ++ if (!boost_temp_adj) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-boost-temp-adjustment", ++ corner->sdelta->temp_band_count, ++ boost_temp_adj); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-boost-temp-adjustment reading failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ for (i = 0; i < corner->sdelta->temp_band_count; i++) { ++ /* Apply static adjustments to boost voltage */ ++ final_boost_volt = boost_voltage + (boost_temp_adj == NULL ++ ? 0 : boost_temp_adj[i]); ++ /* ++ * Limit final adjusted boost voltage value between ceiling ++ * and floor voltage limits ++ */ ++ final_boost_volt = min(final_boost_volt, ++ vreg->cpr4_regulator_data->boost_ceiling_volt); ++ final_boost_volt = max(final_boost_volt, ++ vreg->cpr4_regulator_data->boost_floor_volt); ++ ++ boost_table[i] = (corner->open_loop_volt - final_boost_volt) ++ / ctrl->step_volt; ++ cpr3_debug(vreg, "Adjusted boost voltage margin for temp band %d = %d steps\n", ++ i, boost_table[i]); ++ } ++ ++ corner->ceiling_volt = vreg->cpr4_regulator_data->boost_ceiling_volt; ++ corner->sdelta->boost_table = boost_table; ++ corner->sdelta->allow_boost = true; ++ corner->sdelta->allow_core_count_adj = false; ++ vreg->allow_boost = true; ++ ctrl->allow_boost = true; ++done: ++ kfree(boost_temp_adj); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_init_regulator() - perform all steps necessary to initialize the ++ * configuration data for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_regulator(struct cpr3_regulator *vreg) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse; ++ int rc; ++ ++ rc = cpr4_ipq807x_apss_read_fuse_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ fuse = vreg->platform_fuses; ++ ++ rc = cpr4_apss_parse_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR corner data from device tree, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_mem_acc_init(vreg); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(vreg, "unable to initialize mem-acc regulator settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_ipq807x_apss_calculate_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to calculate open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_limit_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr3_open_loop_voltage_as_ceiling(vreg); ++ ++ rc = cpr3_limit_floor_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr4_ipq807x_apss_calculate_target_quotients(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to calculate target quotients, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_parse_core_count_temp_voltage_adj(vreg, false); ++ if (rc) { ++ cpr3_err(vreg, "unable to parse temperature and core count voltage adjustments, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (vreg->allow_core_count_adj && (vreg->max_core_count <= 0 ++ || vreg->max_core_count > ++ IPQ807x_APSS_CPR_SDELTA_CORE_COUNT)) { ++ cpr3_err(vreg, "qcom,max-core-count has invalid value = %d\n", ++ vreg->max_core_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr4_apss_parse_boost_properties(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to parse boost adjustments, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr4_apss_print_settings(vreg); ++ ++ return rc; ++} ++ ++/** ++ * cpr4_apss_init_controller() - perform APSS CPR4 controller specific ++ * initializations ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_controller(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_ctrl_data(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-down-error-step-limit", ++ &ctrl->down_error_step_limit); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-down-error-step-limit, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-up-error-step-limit", ++ &ctrl->up_error_step_limit); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-up-error-step-limit, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Use fixed step quotient if specified otherwise use dynamic ++ * calculated per RO step quotient ++ */ ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-step-quot-fixed", ++ &ctrl->step_quot_fixed); ++ ctrl->use_dynamic_step_quot = ctrl->step_quot_fixed ? false : true; ++ ++ ctrl->saw_use_unit_mV = of_property_read_bool(ctrl->dev->of_node, ++ "qcom,cpr-saw-use-unit-mV"); ++ ++ of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-voltage-settling-time", ++ &ctrl->voltage_settling_time); ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-limit-supply", NULL)) { ++ ctrl->vdd_limit_regulator = ++ devm_regulator_get(ctrl->dev, "vdd-limit"); ++ if (IS_ERR(ctrl->vdd_limit_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_limit_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd-limit regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_apm_init(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to initialize APM settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_apss_parse_temp_adj_properties(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to parse temperature adjustment properties, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ ctrl->sensor_count = IPQ807x_APSS_CPR_SENSOR_COUNT; ++ ++ /* ++ * APSS only has one thread (0) per controller so the zeroed ++ * array does not need further modification. ++ */ ++ ctrl->sensor_owner = devm_kcalloc(ctrl->dev, ctrl->sensor_count, ++ sizeof(*ctrl->sensor_owner), GFP_KERNEL); ++ if (!ctrl->sensor_owner) ++ return -ENOMEM; ++ ++ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR4; ++ ctrl->supports_hw_closed_loop = false; ++ ctrl->use_hw_closed_loop = of_property_read_bool(ctrl->dev->of_node, ++ "qcom,cpr-hw-closed-loop"); ++ return 0; ++} ++ ++static int cpr4_apss_regulator_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_suspend(ctrl); ++} ++ ++static int cpr4_apss_regulator_resume(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_resume(ctrl); ++} ++ ++static void ipq6018_set_mem_acc(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ ipq6018_mem_acc_tcsr[0].ioremap_addr = ++ ioremap(ipq6018_mem_acc_tcsr[0].phy_addr, 0x4); ++ ipq6018_mem_acc_tcsr[1].ioremap_addr = ++ ioremap(ipq6018_mem_acc_tcsr[1].phy_addr, 0x4); ++ ++ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) && ++ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) && ++ (vreg->current_corner == (vreg->corner_count - CPR3_CORNER_OFFSET))) { ++ ++ writel_relaxed(ipq6018_mem_acc_tcsr[0].value, ++ ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ writel_relaxed(ipq6018_mem_acc_tcsr[1].value, ++ ipq6018_mem_acc_tcsr[1].ioremap_addr); ++ } ++} ++ ++static void ipq6018_clr_mem_acc(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) && ++ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) && ++ (vreg->current_corner != vreg->corner_count - CPR3_CORNER_OFFSET)) { ++ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[1].ioremap_addr); ++ } ++ ++ iounmap(ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ iounmap(ipq6018_mem_acc_tcsr[1].ioremap_addr); ++} ++ ++static struct cpr4_mem_acc_func ipq6018_mem_acc_funcs = { ++ .set_mem_acc = ipq6018_set_mem_acc, ++ .clear_mem_acc = ipq6018_clr_mem_acc ++}; ++ ++static const struct cpr4_reg_data ipq807x_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq807x_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static const struct cpr4_reg_data ipq817x_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ817x_APPS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq807x_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static const struct cpr4_reg_data ipq6018_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ6018_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq6018_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ6018_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq6018_fuse_params, ++ .mem_acc_funcs = &ipq6018_mem_acc_funcs, ++}; ++ ++static const struct cpr4_reg_data ipq9574_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ9574_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq9574_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ9574_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq9574_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static struct of_device_id cpr4_regulator_match_table[] = { ++ { ++ .compatible = "qcom,cpr4-ipq807x-apss-regulator", ++ .data = &ipq807x_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq817x-apss-regulator", ++ .data = &ipq817x_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq6018-apss-regulator", ++ .data = &ipq6018_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq9574-apss-regulator", ++ .data = &ipq9574_cpr_apss ++ }, ++ {} ++}; ++ ++static int cpr4_apss_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_controller *ctrl; ++ const struct of_device_id *match; ++ struct cpr4_reg_data *cpr_data; ++ int i, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -EINVAL; ++ } ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) ++ return -ENOMEM; ++ ++ match = of_match_device(cpr4_regulator_match_table, &pdev->dev); ++ if (!match) ++ return -ENODEV; ++ ++ cpr_data = (struct cpr4_reg_data *)match->data; ++ g_valid_fuse_count = cpr_data->cpr_valid_fuse_count; ++ dev_info(dev, "CPR valid fuse count: %d\n", g_valid_fuse_count); ++ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate; ++ ++ ctrl->dev = dev; ++ /* Set to false later if anything precludes CPR operation. */ ++ ctrl->cpr_allowed_hw = true; ++ ++ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name", ++ &ctrl->name); ++ if (rc) { ++ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_map_fuse_base(ctrl, pdev); ++ if (rc) { ++ cpr3_err(ctrl, "could not map fuse base address\n"); ++ return rc; ++ } ++ ++ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_APSS_CPR_TCSR_START, ++ IPQ807x_APSS_CPR_TCSR_END); ++ if (rc) { ++ cpr3_err(ctrl, "could not read CPR tcsr setting\n"); ++ return rc; ++ } ++ ++ rc = cpr3_allocate_threads(ctrl, 0, 0); ++ if (rc) { ++ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread_count != 1) { ++ cpr3_err(ctrl, "expected 1 thread but found %d\n", ++ ctrl->thread_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr4_apss_init_controller(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_apss_init_thread(&ctrl->thread[0]); ++ if (rc) { ++ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread[0].vreg_count; i++) { ++ ctrl->thread[0].vreg[i].cpr4_regulator_data = cpr_data; ++ rc = cpr4_apss_init_regulator(&ctrl->thread[0].vreg[i]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ platform_set_drvdata(pdev, ctrl); ++ ++ return cpr3_regulator_register(pdev, ctrl); ++} ++ ++static int cpr4_apss_regulator_remove(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_unregister(ctrl); ++} ++ ++static struct platform_driver cpr4_apss_regulator_driver = { ++ .driver = { ++ .name = "qcom,cpr4-apss-regulator", ++ .of_match_table = cpr4_regulator_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = cpr4_apss_regulator_probe, ++ .remove = cpr4_apss_regulator_remove, ++ .suspend = cpr4_apss_regulator_suspend, ++ .resume = cpr4_apss_regulator_resume, ++}; ++ ++static int cpr4_regulator_init(void) ++{ ++ return platform_driver_register(&cpr4_apss_regulator_driver); ++} ++ ++static void cpr4_regulator_exit(void) ++{ ++ platform_driver_unregister(&cpr4_apss_regulator_driver); ++} ++ ++MODULE_DESCRIPTION("CPR4 APSS regulator driver"); ++MODULE_LICENSE("GPL v2"); ++ ++arch_initcall(cpr4_regulator_init); ++module_exit(cpr4_regulator_exit); +--- /dev/null ++++ b/include/soc/qcom/socinfo.h +@@ -0,0 +1,463 @@ ++/* Copyright (c) 2009-2014, 2016, 2020, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_SOCINFO_H_ ++#define _ARCH_ARM_MACH_MSM_SOCINFO_H_ ++ ++#include <linux/of.h> ++ ++#define CPU_IPQ8074 323 ++#define CPU_IPQ8072 342 ++#define CPU_IPQ8076 343 ++#define CPU_IPQ8078 344 ++#define CPU_IPQ8070 375 ++#define CPU_IPQ8071 376 ++ ++#define CPU_IPQ8072A 389 ++#define CPU_IPQ8074A 390 ++#define CPU_IPQ8076A 391 ++#define CPU_IPQ8078A 392 ++#define CPU_IPQ8070A 395 ++#define CPU_IPQ8071A 396 ++ ++#define CPU_IPQ8172 397 ++#define CPU_IPQ8173 398 ++#define CPU_IPQ8174 399 ++ ++#define CPU_IPQ6018 402 ++#define CPU_IPQ6028 403 ++#define CPU_IPQ6000 421 ++#define CPU_IPQ6010 422 ++#define CPU_IPQ6005 453 ++ ++#define CPU_IPQ5010 446 ++#define CPU_IPQ5018 447 ++#define CPU_IPQ5028 448 ++#define CPU_IPQ5000 503 ++#define CPU_IPQ0509 504 ++#define CPU_IPQ0518 505 ++ ++#define CPU_IPQ9514 510 ++#define CPU_IPQ9554 512 ++#define CPU_IPQ9570 513 ++#define CPU_IPQ9574 514 ++#define CPU_IPQ9550 511 ++#define CPU_IPQ9510 521 ++ ++static inline int read_ipq_soc_version_major(void) ++{ ++ const int *prop; ++ prop = of_get_property(of_find_node_by_path("/"), "soc_version_major", ++ NULL); ++ ++ if (!prop) ++ return -EINVAL; ++ ++ return le32_to_cpu(*prop); ++} ++ ++static inline int read_ipq_cpu_type(void) ++{ ++ const int *prop; ++ prop = of_get_property(of_find_node_by_path("/"), "cpu_type", NULL); ++ /* ++ * Return Default CPU type if "cpu_type" property is not found in DTSI ++ */ ++ if (!prop) ++ return CPU_IPQ8074; ++ ++ return le32_to_cpu(*prop); ++} ++ ++static inline int cpu_is_ipq8070(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8070; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8071(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8071; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8072(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8072; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8074(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8074; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8076(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8076; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8078(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8078; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8072a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8072A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8074a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8074A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8076a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8076A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8078a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8078A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8070a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8070A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8071a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8071A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8172(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8172; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8173(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8173; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8174(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8174; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6018(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6018; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6028(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6028; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6000(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6000; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6010(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6010; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6005(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6005; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5010(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5010; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5018(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5018; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5028(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5028; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5000(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5000; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq0509(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ0509; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq0518(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ0518; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9514(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9514; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9554(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9554; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9570(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9570; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9574(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9574; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9550(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9550; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9510(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9510; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq807x(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq8072() || cpu_is_ipq8074() || ++ cpu_is_ipq8076() || cpu_is_ipq8078() || ++ cpu_is_ipq8070() || cpu_is_ipq8071() || ++ cpu_is_ipq8072a() || cpu_is_ipq8074a() || ++ cpu_is_ipq8076a() || cpu_is_ipq8078a() || ++ cpu_is_ipq8070a() || cpu_is_ipq8071a() || ++ cpu_is_ipq8172() || cpu_is_ipq8173() || ++ cpu_is_ipq8174(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq60xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq6018() || cpu_is_ipq6028() || ++ cpu_is_ipq6000() || cpu_is_ipq6010() || ++ cpu_is_ipq6005(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq50xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq5010() || cpu_is_ipq5018() || ++ cpu_is_ipq5028() || cpu_is_ipq5000() || ++ cpu_is_ipq0509() || cpu_is_ipq0518(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq95xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq9514() || cpu_is_ipq9554() || ++ cpu_is_ipq9570() || cpu_is_ipq9574() || ++ cpu_is_ipq9550() || cpu_is_ipq9510(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_nss_crypto_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq50xx() || cpu_is_ipq9570() || ++ cpu_is_ipq9550() || cpu_is_ipq9574() || ++ cpu_is_ipq9554(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_internal_wifi_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq50xx() || cpu_is_ipq9514() || ++ cpu_is_ipq9554() || cpu_is_ipq9574(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_uniphy1_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq9554() || cpu_is_ipq9570() || ++ cpu_is_ipq9574() || cpu_is_ipq9550(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_uniphy2_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq9570() || ++ cpu_is_ipq9574(); ++#else ++ return 0; ++#endif ++} ++ ++#endif /* _ARCH_ARM_MACH_MSM_SOCINFO_H_ */ diff --git a/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch b/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch new file mode 100644 index 0000000000..9b8b4df12b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch @@ -0,0 +1,24 @@ +From 6baf7e4abcea6f7ac21eccf072a20078b39d064c Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 9 Feb 2022 23:13:26 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add label to clocks + +Add label to clocks node as that makes it easy to add the NSS fixed +clocks that are required in their DTSI. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -15,7 +15,7 @@ + compatible = "qcom,ipq8074"; + interrupt-parent = <&intc>; + +- clocks { ++ clocks: clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; |