diff options
7 files changed, 407 insertions, 1 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac index c6cede3a1f..8050c7bea2 100644 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac @@ -12,7 +12,8 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in -enterasys,ws-ap3710i) +enterasys,ws-ap3710i|\ +extreme-networks,ws-ap3825i) mtd_get_mac_ascii cfg2 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress ;; ocedo,panda) diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts new file mode 100644 index 0000000000..3dcbac21a4 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-or-later or MIT + +/include/ "fsl/p1020si-pre.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Extreme Networks WS-AP3825i"; + compatible = "extreme-networks,ws-ap3825i"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet2; + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + }; + + chosen { + bootargs-override = "console=ttyS0,115200"; + }; + + memory { + device_type = "memory"; + }; + + led_spi { + /* + * This is currently non-functioning because the spi-gpio + * driver refuses to register when presented with this node. + */ + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + spi_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wifi1 { + gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:radio1"; + linux,default-trigger = "phy0tpt"; + }; + + wifi2 { + gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:radio2"; + linux,default-trigger = "phy1tpt"; + }; + + led_power_green: power_green { + gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:power"; + }; + + led_power_red: power_red { + gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:power"; + }; + + eth0_red { + gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:eth0"; + }; + + eth0_green { + gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:eth0"; + }; + + eth1_red { + gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:eth1"; + }; + + eth1_green { + gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:eth1"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xec000000 0x4000000>; + + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "denx,fit"; + reg = <0x0 0x3d60000>; + label = "firmware"; + }; + + partition@3d60000 { + reg = <0x3d60000 0x20000>; + label = "calib"; + read-only; + }; + + partition@3d80000{ + reg = <0x3d80000 0x80000>; + label = "u-boot"; + read-only; + }; + + partition@3e00000{ + reg = <0x3e00000 0x100000>; + label = "nvram"; + read-only; + }; + + partition@3f00000 { + reg = <0x3f00000 0x20000>; + label = "cfg2"; + read-only; + }; + + partition@3f20000 { + reg = <0x3f20000 0x20000>; + label = "cfg1"; + read-only; + }; + }; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + gpio0: gpio-controller@fc00 { + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x5>; + reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x6>; + reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; + + mdio@25000 { + status = "disabled"; + }; + + mdio@26000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "okay"; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "okay"; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + usb@23000 { + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1020si-post.dtsi" diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/ws-ap3825i.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/ws-ap3825i.c new file mode 100644 index 0000000000..5a0919c200 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/ws-ap3825i.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* + * Extreme Networks WS-AP3825i Board Setup + * + * Copyright (C) 2021 Martin Kennedy <hurricos@gmail.com> + * + * Based on: + * mpc85xx_rdb.c: + * MPC85xx RDB Board Setup + * Copyright 2013 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +void __init ws_ap3825i_pic_init(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ws_ap3825i_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ws_ap3825i_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + + pr_info("WS-AP3825i board from Extreme Networks\n"); +} + +machine_arch_initcall(ws_ap3825i, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ws_ap3825i_probe(void) +{ + if (of_machine_is_compatible("extreme-networks,ws-ap3825i")) + return 1; + return 0; +} + +define_machine(ws_ap3825i) { + .name = "P1020 RDB", + .probe = ws_ap3825i_probe, + .setup_arch = ws_ap3825i_setup_arch, + .init_IRQ = ws_ap3825i_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile index 2b81884032..e1d1bc6948 100644 --- a/target/linux/mpc85xx/image/Makefile +++ b/target/linux/mpc85xx/image/Makefile @@ -3,6 +3,12 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk +DEVICE_VARS += DTB_SIZE + +define Build/dtb + $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE)) +endef + define Device/Default PROFILES := Default DEVICE_DTS := $(lastword $(subst _, ,$(1))) diff --git a/target/linux/mpc85xx/image/p1020.mk b/target/linux/mpc85xx/image/p1020.mk index 64cad1ad9c..234bdc26a1 100644 --- a/target/linux/mpc85xx/image/p1020.mk +++ b/target/linux/mpc85xx/image/p1020.mk @@ -68,6 +68,18 @@ define Device/enterasys_ws-ap3710i endef TARGET_DEVICES += enterasys_ws-ap3710i +define Device/extreme-networks_ws-ap3825i + DEVICE_VENDOR := Extreme Networks + DEVICE_MODEL := WS-AP3825i + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct + BLOCKSIZE := 128k + DTB_SIZE := 20480 + KERNEL = kernel-bin | lzma | dtb | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata +endef +TARGET_DEVICES += extreme-networks_ws-ap3825i + define Device/ocedo_panda DEVICE_VENDOR := OCEDO DEVICE_MODEL := Panda diff --git a/target/linux/mpc85xx/p1020/config-default b/target/linux/mpc85xx/p1020/config-default index 31fce8b60a..6f2a9d2c3b 100644 --- a/target/linux/mpc85xx/p1020/config-default +++ b/target/linux/mpc85xx/p1020/config-default @@ -7,6 +7,7 @@ CONFIG_EEPROM_LEGACY=y # CONFIG_FSL_CORENET_CF is not set CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_TBSYNC=y +CONFIG_GPIO_74X164=y # CONFIG_GPIO_MAX77620 is not set CONFIG_HAVE_RCU_TABLE_FREE=y CONFIG_HIVEAP_330=y @@ -40,6 +41,7 @@ CONFIG_RPS=y # CONFIG_RTC_DRV_MAX77686 is not set CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_SMP=y +CONFIG_SPI_GPIO=y CONFIG_SWCONFIG_B53=y # CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set CONFIG_SWCONFIG_B53_PHY_DRIVER=y @@ -49,4 +51,5 @@ CONFIG_SWCONFIG_B53_PHY_DRIVER=y CONFIG_TREE_RCU=y CONFIG_UBIFS_FS=y CONFIG_WS_AP3710I=y +CONFIG_WS_AP3825I=y CONFIG_XPS=y diff --git a/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch new file mode 100644 index 0000000000..881f88ddb5 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch @@ -0,0 +1,44 @@ +From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001 +From: Martin Kennedy <hurricos@gmail.com> +Date: Sat, 1 Jan 2022 11:01:37 -0500 +Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support + +This patch adds support for building Linux for the Extreme Networks +WS-AP3825i AP. + +diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig +index 764b916..66cbb73 100644 +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -82,6 +82,16 @@ config WS_AP3710I + This board is a Concurrent Dual-Band wireless access point with a + Freescale P1020 SoC. + ++config WS_AP3825I ++ bool "Extreme Networks WS-AP3825i" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Extreme Networks WS-AP3825i board. ++ This board is a Concurrent Dual-Band wireless access point with a ++ Freescale P1020 SoC. ++ + config MPC8540_ADS + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE +diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile +index 443b44b..d37b650 100644 +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_PANDA) += panda.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o ++obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o + obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o +-- +2.25.1 + |