diff options
| -rw-r--r-- | target/linux/ath79/dts/ar9344_atheros_db120.dts | 42 | ||||
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 1 |
2 files changed, 25 insertions, 18 deletions
diff --git a/target/linux/ath79/dts/ar9344_atheros_db120.dts b/target/linux/ath79/dts/ar9344_atheros_db120.dts index f0173ebdc7..8811d4f457 100644 --- a/target/linux/ath79/dts/ar9344_atheros_db120.dts +++ b/target/linux/ath79/dts/ar9344_atheros_db120.dts @@ -135,10 +135,30 @@ reg = <0x7e0000 0x010000>; }; - art: partition@7f0000 { + partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_6: macaddr@6 { + reg = <0x6 0x6>; + }; + + calibration_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_art_5000: calibration@5000 { + reg = <0x5000 0x440>; + }; }; }; }; @@ -204,7 +224,8 @@ ath9k: wifi@0,0 { compatible = "pci168c,0030"; reg = <0x0000 0 0 0 0>; - qca,no-eeprom; + nvmem-cells = <&calibration_art_5000>; + nvmem-cell-names = "calibration"; ieee80211-freq-limit = <4900000 5990000>; #gpio-cells = <2>; gpio-controller; @@ -214,7 +235,8 @@ &wmac { status = "okay"; - mtd-cal-data = <&art 0x1000>; + nvmem-cells = <&calibration_art_1000>; + nvmem-cell-names = "calibration"; }; &usb { @@ -224,17 +246,3 @@ &usb_phy { status = "okay"; }; - -&art { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - reg = <0x6 0x6>; - }; -}; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 52f015ed5f..0001fa1590 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -83,7 +83,6 @@ case "$FIRMWARE" in ;; "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in - atheros,db120|\ engenius,eap600|\ engenius,ecb600|\ mercury,mw4530r-v1|\ |