diff options
8 files changed, 163 insertions, 4 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index a27b751d9b..64b2b34d8a 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -67,6 +67,7 @@ openmesh,om5p-ac-v1|\ openmesh,om5p-ac-v2|\ samsung,wam250|\ ubnt,nanostation-m|\ +watchguard,ap300|\ yuncore,a770|\ yuncore,a782|\ yuncore,a930|\ diff --git a/target/linux/ath79/dts/qca9558_watchguard_ap300.dts b/target/linux/ath79/dts/qca9558_watchguard_ap300.dts new file mode 100644 index 0000000000..90f5cddfa7 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_watchguard_ap300.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x_senao_loader.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "watchguard,ap300", "qca,qca9558"; + model = "WatchGuard AP300"; + + aliases { + label-mac-device = ð0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + lan_data { + label = "orange:lan_data"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + lan_link { + label = "green:lan_link"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + wifi_amber { + label = "amber:wifi"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi_green { + label = "green:wifi"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + virtual_flash { + devices = <&fwconcat0 &fwconcat1 &fwconcat2>; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <20000>; + always-running; + }; +}; + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + + phy-handle = <&phy5>; + phy-mode = "rgmii-id"; + + pll-data = <0x82000000 0x80000101 0x80001313>; +}; + +&mdio0 { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +&partitions { + fwconcat2: partition@ff0000 { + label = "fwconcat2"; + reg = <0xff0000 0x1000000>; + }; + + art: partition@1ff0000 { + label = "art"; + reg = <0x1ff0000 0x010000>; + read-only; + }; +}; + +&wdt { + status = "disabled"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; +}; + +&art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 4773826520..d5395e74b7 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -40,7 +40,8 @@ alfa-network,n5q) ucidef_set_led_rssi "signal3" "SIGNAL3" "green:signal3" "wlan0" "50" "100" ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100" ;; -alfa-network,pi-wifi4) +alfa-network,pi-wifi4|\ +watchguard,ap300) ucidef_set_led_netdev "lan_data" "LAN_DATA" "orange:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan_link" "eth0" "link" ;; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 4683264c1c..95260c016a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ath79_setup_interfaces() ubnt,unifiac-lr|\ ubnt,unifiac-mesh|\ ubnt,unifi|\ + watchguard,ap300|\ wd,mynet-wifi-rangeextender|\ winchannel,wb2000|\ zyxel,nwa1100-nh|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 9d25808307..a47b29e7c7 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -15,7 +15,8 @@ case "$FIRMWARE" in araknis,an-700-ap-i-ac|\ engenius,eap1200h|\ engenius,enstationac-v1|\ - glinet,gl-x750) + glinet,gl-x750|\ + watchguard,ap300) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2) ;; diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index f161540a68..d80927679d 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -40,7 +40,8 @@ platform_do_upgrade() { engenius,eap600|\ engenius,ecb600|\ engenius,ens202ext-v1|\ - engenius,enstationac-v1) + engenius,enstationac-v1|\ + watchguard,ap300) IMAGE_LIST="tar tzf $1" IMAGE_CMD="tar xzOf $1" KERNEL_PART="loader" diff --git a/target/linux/ath79/image/common-senao.mk b/target/linux/ath79/image/common-senao.mk index dda7da6776..e0e60dbe27 100644 --- a/target/linux/ath79/image/common-senao.mk +++ b/target/linux/ath79/image/common-senao.mk @@ -1,4 +1,4 @@ -DEVICE_VARS += SENAO_IMGNAME +DEVICE_VARS += SENAO_IMGNAME WATCHGUARD_MAGIC # This needs to make OEM config archive 'sysupgrade.tgz' an empty file prior to OEM # sysupgrade, as otherwise it will implant the old configuration from @@ -27,6 +27,13 @@ define Build/senao-tar-gz rm -rf $@.tmp $@.len $@.md5 endef +define Build/watchguard-cksum + -echo -n $(word 1,$(1)) | cat $@ - | md5sum | \ + cut -d ' ' -f1 | tr -d '\n' > $@.md5 && \ + cat $@.md5 >> $@ && \ + rm -rf $@.md5 +endef + define Device/senao_loader_okli $(Device/loader-okli-uimage) KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x73714f4b diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index ff7c3b156e..b0b8b70ba4 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2589,6 +2589,21 @@ define Device/wallys_dr531 endef TARGET_DEVICES += wallys_dr531 +define Device/watchguard_ap300 + $(Device/senao_loader_okli) + SOC := qca9558 + DEVICE_VENDOR := WatchGuard + DEVICE_MODEL := AP300 + DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct + IMAGE_SIZE := 11584k + LOADER_FLASH_OFFS := 0x220000 + SENAO_IMGNAME := senao-ap300 + WATCHGUARD_MAGIC := 82kdlzk2 + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ + check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC) +endef +TARGET_DEVICES += watchguard_ap300 + define Device/wd_mynet-n600 $(Device/seama) SOC := ar9344 |