diff options
14 files changed, 109 insertions, 779 deletions
diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile index fe6a93244a..e4da7fb7e7 100644 --- a/target/linux/at91/Makefile +++ b/target/linux/at91/Makefile @@ -10,7 +10,7 @@ BOARDNAME:=Microchip (Atmel AT91) FEATURES:=ext4 squashfs targz usb usbgadget ubifs SUBTARGETS:=sama5 sam9x -KERNEL_PATCHVER:=5.4 +KERNEL_PATCHVER:=5.10 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts b/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts deleted file mode 100644 index fd9d260f2a..0000000000 --- a/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts +++ /dev/null @@ -1,220 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wb45n.dts - Device Tree file for WB45NBT board - * - * Copyright (C) 2015 Laird - */ - -/dts-v1/; -#include "at91sam9g25.dtsi" - -/ { - model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; - compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - - rstc@fffffe00 { - compatible = "atmel,sama5d3-rstc"; - }; - - pinctrl@fffff400 { - nand { - pinctrl_nand: nand-0 { - atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ - AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ - AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ - AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ - AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ - AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD5 gpio RDY/BUSY pin pull_up */ - }; - }; - - usb2 { - pinctrl_board_usb2: usb2-board { - atmel,pins = - <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */ - }; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - usart3: serial@f8028000 { - status = "okay"; - }; - - spi0: spi@f0000000 { - status = "okay"; - cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; - }; - - mmc0: mmc@f0008000 { - pinctrl-0 = < - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb2: gadget@f803c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_board_usb2>; - atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - - shdwc@fffffe10 { - atmel,wakeup-mode = "low"; - }; - - rtc@fffffeb0 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = < - &pioB 12 GPIO_ACTIVE_HIGH - &pioA 31 GPIO_ACTIVE_HIGH - >; - atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bs"; - reg = <0x0 0x20000>; - }; - - uboot@20000 { - label = "u-boot"; - reg = <0x20000 0x80000>; - }; - - ubootenv@a0000 { - label = "u-boot-env"; - reg = <0xa0000 0x20000>; - }; - - ubootenv@c0000 { - label = "redund-env"; - reg = <0xc0000 0x20000>; - }; - - kernel-a@e0000 { - label = "kernel-a"; - reg = <0xe0000 0x280000>; - }; - - kernel-b@360000 { - label = "kernel-b"; - reg = <0x360000 0x280000>; - }; - - rootfs-a@5e0000 { - label = "rootfs-a"; - reg = <0x5e0000 0x2600000>; - }; - - rootfs-b@2be0000 { - label = "rootfs-b"; - reg = <0x2be0000 0x2600000>; - }; - - user@51e0000 { - label = "user"; - reg = <0x51e0000 0x2dc0000>; - }; - - logs@7fa0000 { - label = "logs"; - reg = <0x7fa0000 0x60000>; - }; - }; - }; - - atheros { - compatible = "atheros,ath6kl"; - atheros,board-id = "SD32"; - }; - - keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - irqbtn@pb18 { - label = "IRQBTN"; - linux,code = <99>; - gpios = <&pioB 18 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; - }; - }; -}; diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts b/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts deleted file mode 100644 index 15b10a8b06..0000000000 --- a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wb50n.dts - Device Tree file for wb50n board - * - * Copyright (C) 2015 Laird - */ - -/dts-v1/; -#include "wb50n.dtsi" - -/ { - model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; - compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M"; - }; - - ahb { - - apb { - mmc0: mmc@f0000000 { - status = "okay"; - }; - - macb1: ethernet@f802c000 { - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - /* On BB40 this port is labeled UART1 */ - usart0: serial@f001c000 { - status = "okay"; - }; - - /* On BB40 this port is labeled UART0 */ - usart1: serial@f0020000 { - status = "okay"; - }; - - i2c0: i2c@f0014000 { - status = "okay"; - }; - - spi1: spi@f8008000 { - status = "okay"; - - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <8000000>; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb0: gadget@00500000 { - status = "okay"; - }; - - usb1: ohci@00600000 { - status = "okay"; - }; - - usb2: ehci@00700000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - btn0@pa10 { - label = "BTNESC"; - linux,code = <1>; /* ESC button */ - gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; - }; - - irqbtn@pe31 { - label = "IRQBTN"; - linux,code = <99>; /* SysReq button */ - gpios = <&pioE 31 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led0 { - label = "wb50n:blue:led0"; - gpios = <&pioA 12 GPIO_ACTIVE_LOW>; - }; - - led1 { - label = "wb50n:green:led1"; - gpios = <&pioA 24 GPIO_ACTIVE_LOW>; - }; - - led2 { - label = "wb50n:red:led2"; - gpios = <&pioA 26 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi b/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi deleted file mode 100644 index 936cce39ed..0000000000 --- a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi +++ /dev/null @@ -1,205 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wb50n.dts - Device Tree file for wb50n board - * - * Copyright (C) 2015 Laird - */ - -#include "sama5d31.dtsi" - -/ { - model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; - compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - - apb { - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - - periphck { - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <13>; - atmel,clk-output-range = <0 132000000>; - }; - }; - }; - - pinctrl@fffff200 { - board { - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */ - }; - - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */ - }; - }; - }; - - mmc0: mmc@f0000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; - cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>; - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - mmc1: mmc@f8000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - }; - - - dbgu: serial@ffffee00 { - dmas = <0>, <0>; /* Do not use DMA for dbgu */ - }; - - /* On BB40 this port is labeled UART1 */ - usart0: serial@f001c000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; - }; - - /* On BB40 this port is labeled UART0 */ - usart1: serial@f0020000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; - dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>; - }; - - /* USART3 is direct-connect to the Bluetooth UART on the radio SIP */ - usart3: serial@f8024000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; - status = "okay"; - }; - - spi1: spi@f8008000 { - cs-gpios = <&pioC 25 0>, <0>, <0>, <0>; - }; - - sckc@fffffe50 { - slow_osc: slow_osc { - atmel,osc-bypass; - }; - }; - }; - - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <8>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bs"; - reg = <0x0 0x20000>; - }; - - uboot@20000 { - label = "u-boot"; - reg = <0x20000 0x80000>; - }; - - ubootenv@a0000 { - label = "u-boot-env"; - reg = <0xa0000 0x20000>; - }; - - ubootenv@c0000 { - label = "u-boot-env"; - reg = <0xc0000 0x20000>; - }; - - kernel-a@e0000 { - label = "kernel-a"; - reg = <0xe0000 0x500000>; - }; - - kernel-b@5e0000 { - label = "kernel-b"; - reg = <0x5e0000 0x500000>; - }; - - rootfs-a@ae0000 { - label = "rootfs-a"; - reg = <0xae0000 0x3000000>; - }; - - rootfs-b@3ae0000 { - label = "rootfs-b"; - reg = <0x3ae0000 0x3000000>; - }; - - user@6ae0000 { - label = "user"; - reg = <0x6ae0000 0x14e0000>; - }; - - }; - - usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - }; - - usb1: ohci@00600000 { - num-ports = <3>; - atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; - atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; - }; - }; - - atheros { - compatible = "atheros,ath6kl"; - atheros,board-id = "SD32"; - }; -}; diff --git a/target/linux/at91/image/sam9x.mk b/target/linux/at91/image/sam9x.mk index 1a036e493f..6f10123bba 100644 --- a/target/linux/at91/image/sam9x.mk +++ b/target/linux/at91/image/sam9x.mk @@ -194,6 +194,7 @@ define Device/laird_wb45n $(Device/evaluation-fit) DEVICE_VENDOR := Laird DEVICE_MODEL := WB45N + DEVICE_DTS := at91-wb45n DEVICE_PACKAGES := \ kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \ kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \ diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk index d644f89266..f8e05aae93 100644 --- a/target/linux/at91/image/sama5.mk +++ b/target/linux/at91/image/sama5.mk @@ -104,6 +104,7 @@ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"") $(Device/evaluation-fit) DEVICE_VENDOR := Laird DEVICE_MODEL := WB50N + DEVICE_DTS := at91-wb50n DEVICE_PACKAGES := \ kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \ kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \ diff --git a/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch new file mode 100644 index 0000000000..2bf8ca52ec --- /dev/null +++ b/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ + at91-kizboxmini-mb.dtb \ + at91-kizboxmini-rd.dtb \ + at91-smartkiz.dtb \ ++ at91-q5xr5.dtb \ + at91-wb45n.dtb \ + at91sam9g15ek.dtb \ + at91sam9g25-gardena-smart-gateway.dtb \ diff --git a/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch deleted file mode 100644 index b736b99f7f..0000000000 --- a/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - at91-ariettag25.dtb \ - at91-cosino_mega2560.dtb \ - at91-kizboxmini.dtb \ -+ at91-q5xr5.dtb \ - at91-wb45n.dtb \ - at91sam9g15ek.dtb \ - at91sam9g25ek.dtb \ diff --git a/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch deleted file mode 100644 index c35ecc510a..0000000000 --- a/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -44,7 +44,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - at91sam9g25ek.dtb \ - at91sam9g35ek.dtb \ - at91sam9x25ek.dtb \ -- at91sam9x35ek.dtb -+ at91sam9x35ek.dtb \ -+ wb45n.dtb - dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ - at91-nattis-2-natte-2.dtb \ diff --git a/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch b/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch deleted file mode 100644 index 9d060426ec..0000000000 --- a/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/arm/boot/dts/wb45n.dts -+++ b/arch/arm/boot/dts/wb45n.dts -@@ -126,7 +126,7 @@ - }; - }; - -- usb0: ohci@00600000 { -+ usb0: ohci@600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = < -@@ -136,7 +136,7 @@ - atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; - }; - -- usb1: ehci@00700000 { -+ usb1: ehci@700000 { - status = "okay"; - }; - diff --git a/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch deleted file mode 100644 index ab5d7afcbb..0000000000 --- a/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -66,7 +66,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-sama5d4_ma5d4evk.dtb \ - at91-sama5d4_xplained.dtb \ - at91-sama5d4ek.dtb \ -- at91-vinco.dtb -+ at91-vinco.dtb \ -+ wb50n.dtb - dtb-$(CONFIG_ARCH_ATLAS6) += \ - atlas6-evb.dtb - dtb-$(CONFIG_ARCH_ATLAS7) += \ diff --git a/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch b/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch deleted file mode 100644 index bfe6e5a9ba..0000000000 --- a/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/arm/boot/dts/wb50n.dts -+++ b/arch/arm/boot/dts/wb50n.dts -@@ -60,15 +60,15 @@ - }; - }; - -- usb0: gadget@00500000 { -+ usb0: gadget@500000 { - status = "okay"; - }; - -- usb1: ohci@00600000 { -+ usb1: ohci@600000 { - status = "okay"; - }; - -- usb2: ehci@00700000 { -+ usb2: ehci@700000 { - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/wb50n.dtsi -+++ b/arch/arm/boot/dts/wb50n.dtsi -@@ -185,13 +185,13 @@ - - }; - -- usb0: gadget@00500000 { -+ usb0: gadget@500000 { - atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - }; - -- usb1: ohci@00600000 { -+ usb1: ohci@600000 { - num-ports = <3>; - atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; - atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; diff --git a/target/linux/at91/sam9x/config-default b/target/linux/at91/sam9x/config-default index d0a1cbc0a4..51d1e763cf 100644 --- a/target/linux/at91/sam9x/config-default +++ b/target/linux/at91/sam9x/config-default @@ -1,22 +1,6 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_BINFMT_FLAT=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_AT91=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_KEEP_MEMBLOCK=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y @@ -27,27 +11,37 @@ CONFIG_ARCH_MULTI_V4_V5=y CONFIG_ARCH_MULTI_V5=y CONFIG_ARCH_NR_GPIO=0 CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_ARM_THUMB=y CONFIG_ARM_UNWIND=y +# CONFIG_AT91RM9200_WATCHDOG is not set +# CONFIG_AT91SAM9X_WATCHDOG is not set +CONFIG_AT91_SOC_ID=y +# CONFIG_AT91_SOC_SFR is not set +CONFIG_ATMEL_AIC5_IRQ=y +CONFIG_ATMEL_AIC_IRQ=y +CONFIG_ATMEL_CLOCKSOURCE_PIT=y +CONFIG_ATMEL_CLOCKSOURCE_TCB=y +CONFIG_ATMEL_EBI=y +CONFIG_ATMEL_PIT=y +CONFIG_ATMEL_SDRAMC=y +CONFIG_ATMEL_ST=y +CONFIG_ATMEL_TCB_CLKSRC=y +# CONFIG_ATMEL_TCLIB is not set CONFIG_AUTO_ZRELADDR=y CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLONE_BACKWARDS=y CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_AT91=y CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CONFIGFS_FS=y CONFIG_CPU_32v4T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV4T=y @@ -69,9 +63,12 @@ CONFIG_CPU_USE_DOMAINS=y CONFIG_CRC7=y CONFIG_CRC_CCITT=y CONFIG_CRC_ITU_T=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_RNG2=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DMA_OPS=y CONFIG_DMA_REMAP=y CONFIG_DTC=y CONFIG_EDAC_ATOMIC_SCRUB=y @@ -85,56 +82,28 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_MULTI_HANDLER=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PCI=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HZ_FIXED=0 +CONFIG_HZ=128 +CONFIG_HZ_FIXED=128 CONFIG_HZ_PERIODIC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y @@ -142,10 +111,16 @@ CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y CONFIG_LIBFDT=y +CONFIG_LLD_VERSION=0 CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_MEMFD_CREATE=y +CONFIG_MEMORY=y +# CONFIG_MFD_AT91_USART is not set +CONFIG_MFD_ATMEL_SMC=y +CONFIG_MFD_SYSCON=y CONFIG_MIGRATION=y CONFIG_MMC=y +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_BLOCK=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_OF_AT91=y @@ -154,10 +129,12 @@ CONFIG_MODULES_USE_ELF_REL=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_KUSER_HELPERS=y CONFIG_NEED_PER_CPU_KM=y +CONFIG_NLS=y CONFIG_OF=y CONFIG_OF_ADDRESS=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y CONFIG_OF_IRQ=y CONFIG_OF_KOBJ=y CONFIG_OF_NET=y @@ -166,9 +143,21 @@ CONFIG_OLD_SIGSUSPEND3=y CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +# CONFIG_PINCTRL_AT91PIO4 is not set CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +# CONFIG_SAMA5D4_WATCHDOG is not set CONFIG_SERIAL_8250_FSL=y +# CONFIG_SERIAL_ATMEL is not set +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SOC_AT91RM9200=y +CONFIG_SOC_AT91SAM9=y +CONFIG_SOC_BUS=y +CONFIG_SOC_SAM9X60=y +CONFIG_SOC_SAM_V4_V5=y CONFIG_SPARSE_IRQ=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_SRCU=y @@ -179,6 +168,24 @@ CONFIG_TIMER_PROBE=y CONFIG_TINY_SRCU=y CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" CONFIG_UNWINDER_ARM=y +CONFIG_USB=y +CONFIG_USB_ACM=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +# CONFIG_USB_AT91 is not set +# CONFIG_USB_ATMEL_USBA is not set +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_AT91=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGET=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_AT91=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_SUPPORT=y CONFIG_USE_OF=y # CONFIG_VFP is not set diff --git a/target/linux/at91/sama5/config-default b/target/linux/at91/sama5/config-default index 10d7d4d3b0..20fb90502a 100644 --- a/target/linux/at91/sama5/config-default +++ b/target/linux/at91/sama5/config-default @@ -1,22 +1,6 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_AT91=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_BINFMT_FLAT=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_KEEP_MEMBLOCK=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y @@ -26,14 +10,9 @@ CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_NR_GPIO=0 CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_ARM=y CONFIG_ARM_AT91_CPUIDLE=y CONFIG_ARM_CPU_SUSPEND=y @@ -50,6 +29,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_AT91_ADC=y CONFIG_AT91_SAMA5D2_ADC=y CONFIG_AT91_SOC_ID=y +# CONFIG_AT91_SOC_SFR is not set CONFIG_ATMEL_AIC5_IRQ=y # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_ATMEL_CLOCKSOURCE_TCB=y @@ -74,7 +54,6 @@ CONFIG_BLK_DEV_SD=y CONFIG_BLK_PM=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_CACHE_L2X0=y -CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLONE_BACKWARDS=y CONFIG_CMA=y @@ -118,29 +97,17 @@ CONFIG_CRC16=y # CONFIG_CRC32_SARWATE is not set CONFIG_CRC32_SLICEBY8=y CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y @@ -156,6 +123,7 @@ CONFIG_DMADEVICES=y CONFIG_DMA_CMA=y CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y +CONFIG_DMA_OPS=y CONFIG_DMA_REMAP=y CONFIG_DMA_SHARED_BUFFER=y CONFIG_DNOTIFY=y @@ -173,6 +141,7 @@ CONFIG_DRM_PANEL_BRIDGE=y CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DTC=y +CONFIG_DVB_CORE=y CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EEPROM_AT24=y @@ -196,12 +165,14 @@ CONFIG_FORCE_MAX_ZONEORDER=15 CONFIG_FREEZER=y CONFIG_FS_IOMAP=y CONFIG_FS_MBCACHE=y +CONFIG_FW_CACHE=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_MULTI_HANDLER=y @@ -213,6 +184,8 @@ CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_VDSO_32=y CONFIG_GLOB=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y @@ -222,53 +195,7 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_AT91_AUDIO_PLL=y -CONFIG_HAVE_AT91_GENERATED_CLK=y -CONFIG_HAVE_AT91_H32MX=y -CONFIG_HAVE_AT91_I2S_MUX_CLK=y -CONFIG_HAVE_AT91_SMD=y -CONFIG_HAVE_AT91_USB_CLK=y -CONFIG_HAVE_AT91_UTMI=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PCI=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HDMI=y CONFIG_HID=y CONFIG_HID_GENERIC=y @@ -301,6 +228,7 @@ CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y CONFIG_JBD2=y # CONFIG_JFFS2_FS is not set +CONFIG_KCMP=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_XZ is not set CONFIG_KEXEC=y @@ -312,19 +240,28 @@ CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LIBFDT=y +CONFIG_LLD_VERSION=0 CONFIG_LOCALVERSION_AUTO=y CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_MACB=y -CONFIG_MACB_USE_HWSTAMP=y CONFIG_MAGIC_SYSRQ=y CONFIG_MANDATORY_FILE_LOCKING=y CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_TEST_SUPPORT=y +CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_MEMFD_CREATE=y CONFIG_MEMORY=y @@ -386,6 +323,7 @@ CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y +CONFIG_PHYLINK=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_PINCTRL_AT91PIO4=y @@ -411,7 +349,6 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y CONFIG_PWM_ATMEL_TCB=y CONFIG_PWM_SYSFS=y CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_MMIO=y @@ -457,6 +394,8 @@ CONFIG_SND_DMAENGINE_PCM=y CONFIG_SND_JACK=y CONFIG_SND_JACK_INPUT_DEV=y # CONFIG_SND_MCHP_SOC_I2S_MCC is not set +# CONFIG_SND_MCHP_SOC_SPDIFRX is not set +# CONFIG_SND_MCHP_SOC_SPDIFTX is not set CONFIG_SND_PCM=y CONFIG_SND_PCM_TIMER=y CONFIG_SND_SOC=y @@ -511,11 +450,13 @@ CONFIG_USB_ACM=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_AT91 is not set # CONFIG_USB_ATMEL_USBA is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_COMMON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_AT91=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ETH is not set CONFIG_USB_GADGET=y CONFIG_USB_HID=y CONFIG_USB_OHCI_HCD=y @@ -534,6 +475,7 @@ CONFIG_VFAT_FS=y CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_VIDEOMODE_HELPERS=y +# CONFIG_VIDEO_ATMEL_ISC is not set # CONFIG_VIDEO_ATMEL_ISI is not set # CONFIG_VIDEO_CPIA2 is not set CONFIG_VIDEO_DEV=y |