diff options
5 files changed, 220 insertions, 4 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 2c6a730fbf..4cfcdd3066 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -27,6 +27,7 @@ engenius,eap300-v2|\ engenius,ecb1200|\ engenius,ecb1750|\ engenius,ecb350-v1|\ +engenius,ecb600|\ engenius,enh202-v1|\ engenius,ens202ext-v1|\ engenius,enstationac-v1|\ diff --git a/target/linux/ath79/dts/ar9344_engenius_ecb600.dts b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts new file mode 100644 index 0000000000..8f838607cc --- /dev/null +++ b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "EnGenius ECB600"; + compatible = "engenius,ecb600", "qca,ar9344"; + + aliases { + label-mac-device = ð0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + serial0 = &uart; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "amber:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wifi5g { + label = "blue:wifi5g"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + wifi2g { + label = "blue:wifi2g"; + gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&firmware1 &firmware2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,okli"; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + label = "custom"; + reg = <0x050000 0x050000>; + read-only; + }; + + partition@a0000 { + label = "loader"; + reg = <0x0a0000 0x010000>; + read-only; + }; + + firmware2: partition@b0000 { + label = "firmware2"; + reg = <0x0b0000 0x170000>; + }; + + partition@220000 { + label = "fakeroot"; + reg = <0x220000 0x010000>; + read-only; + }; + + firmware1: partition@230000 { + label = "firmware1"; + reg = <0x230000 0xbc0000>; + }; + + partition@df0000 { + label = "failsafe"; + reg = <0xdf0000 0x200000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + pll-data = <0x02000000 0x00000101 0x00001313>; + + gmac-config { + device = <&gmac>; + rgmii-gmac0 = <1>; + rxdv-delay = <3>; + rxd-delay = <3>; + }; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0,0 { + compatible = "pci168c,0030"; + reg = <0x0 0 0 0 0>; + qca,no-eeprom; + qca,disable-5ghz; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-2)>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&wmac { + status = "okay"; + + qca,disable-2ghz; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-1)>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 3ea0815ff2..a3b5d45ad2 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -32,6 +32,7 @@ ath79_setup_interfaces() engenius,ecb1200|\ engenius,ecb1750|\ engenius,ecb350-v1|\ + engenius,ecb600|\ enterasys,ws-ap3705i|\ glinet,gl-ar300m-lite|\ glinet,gl-usb150|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 2746cf4137..867a1dac44 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -88,10 +88,7 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x440 ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) ;; - enterasys,ws-ap3705i) - caldata_extract "calibrate" 0x5000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0) - ;; + engenius,ecb600|\ mercury,mw4530r-v1|\ ocedo,raccoon|\ tplink,tl-wdr3500-v1|\ @@ -104,6 +101,10 @@ case "$FIRMWARE" in winchannel,wb2000) caldata_extract "art" 0x5000 0x440 ;; + enterasys,ws-ap3705i) + caldata_extract "calibrate" 0x5000 0x440 + ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0) + ;; netgear,wnr2200-8m|\ netgear,wnr2200-16m|\ pcs,cap324|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index ec2b1d2bde..064177fcaf 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1002,6 +1002,16 @@ define Device/engenius_ecb350-v1 endef TARGET_DEVICES += engenius_ecb350-v1 +define Device/engenius_ecb600 + $(Device/engenius_loader_okli) + SOC := ar9344 + DEVICE_MODEL := ECB600 + IMAGE_SIZE := 12032k + LOADER_FLASH_OFFS := 0x230000 + ENGENIUS_IMGNAME := senao-ecb600 +endef +TARGET_DEVICES += engenius_ecb600 + define Device/engenius_enh202-v1 $(Device/engenius_loader_okli) SOC := ar7240 |