diff options
8 files changed, 27 insertions, 137 deletions
diff --git a/target/linux/au1000-2.6/image/Makefile b/target/linux/au1000-2.6/image/Makefile index b5ba3d4542..5b8c3cc0f0 100644 --- a/target/linux/au1000-2.6/image/Makefile +++ b/target/linux/au1000-2.6/image/Makefile @@ -48,12 +48,19 @@ define Image/Prepare $(OBJCOPY_BIN) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.bin endef +define Image/Build/Initramfs + $(OBJCOPY_SREC) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.srec +endef + define Image/Build $(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img $(CP) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.bin $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs +ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) + $(call Image/Build/Initramfs) +endif endef $(eval $(call BuildImage)) diff --git a/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch b/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch deleted file mode 100644 index f2c524a030..0000000000 --- a/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- linux-2.6.16.2/drivers/usb/host/ohci-pci.c 2006-04-07 18:56:47.000000000 +0200 -+++ linux-2.6.16.2.new/drivers/usb/host/ohci-pci.c 2006-04-11 14:20:33.000000000 +0200 -@@ -215,7 +215,7 @@ - #endif - }; - -- -+/* - static int __init ohci_hcd_pci_init (void) - { - printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name); -@@ -227,11 +227,12 @@ - return pci_register_driver (&ohci_pci_driver); - } - module_init (ohci_hcd_pci_init); -- -+*/ - /*-------------------------------------------------------------------------*/ -- -+/* - static void __exit ohci_hcd_pci_cleanup (void) - { - pci_unregister_driver (&ohci_pci_driver); - } - module_exit (ohci_hcd_pci_cleanup); -+*/ diff --git a/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch index 273de9fa6a..276659aded 100644 --- a/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch +++ b/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch @@ -1,9 +1,9 @@ -diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig ---- linux-2.6.16.7/drivers/char/watchdog/Kconfig 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 23:23:53.000000000 +0200 -@@ -460,6 +460,14 @@ - timer expired and no process has written to /dev/watchdog during - that time. +diff -urN linux-2.6.21.1/drivers/char/watchdog/Kconfig linux-2.6.21.1.new/drivers/char/watchdog/Kconfig +--- linux-2.6.21.1/drivers/char/watchdog/Kconfig 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/drivers/char/watchdog/Kconfig 2007-05-24 20:05:52.000000000 +0200 +@@ -586,6 +586,14 @@ + To compile this driver as a module, choose M here: the + module will be called rm9k_wdt. +config MTX1_WATCHDOG + tristate "MTX-1 Hardware Watchdog" @@ -16,13 +16,14 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/driver # S390 Architecture config ZVM_WATCHDOG -diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile ---- linux-2.6.16.7/drivers/char/watchdog/Makefile 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 23:21:18.000000000 +0200 -@@ -65,6 +65,7 @@ - +diff -urN linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1.new/drivers/char/watchdog/Makefile +--- linux-2.6.21.1/drivers/char/watchdog/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/drivers/char/watchdog/Makefile 2007-05-24 20:05:41.000000000 +0200 +@@ -74,6 +74,7 @@ # MIPS Architecture obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o +obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o # S390 Architecture + diff --git a/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch b/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch deleted file mode 100644 index 34d1005347..0000000000 --- a/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:35:42.000000000 +0200 -@@ -71,9 +71,7 @@ - #endif - - // initialize sys_pinfunc: -- // disable second ethernet port (SYS_PF_NI2) -- // set U3/GPIO23 to GPIO23 (SYS_PF_U3) -- au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC ); -+ au_writel( SYS_PF_NI2, SYS_PINFUNC ); - - // initialize GPIO - au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); diff --git a/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch b/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch deleted file mode 100644 index 9e54ac1c59..0000000000 --- a/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch +++ /dev/null @@ -1,63 +0,0 @@ -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:21.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:03.000000000 +0200 -@@ -44,6 +44,9 @@ - #include <asm/pgtable.h> - #include <asm/mach-au1x00/au1000.h> - -+extern int (*board_pci_idsel)(unsigned int devsel, int assert); -+int mtx1_pci_idsel(unsigned int devsel, int assert); -+ - void board_reset (void) - { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ -@@ -77,11 +80,37 @@ - au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); - au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF - au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF -+ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON - au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF - - // enable LED and set it to green - au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR ); - au_writel( 0x18000800, GPIO2_OUTPUT ); - -+ board_pci_idsel = mtx1_pci_idsel; -+ - printk("4G Systems MTX-1 Board\n"); - } -+ -+int -+mtx1_pci_idsel(unsigned int devsel, int assert) -+{ -+#define MTX_IDSEL_ONLY_0_AND_3 0 -+#if MTX_IDSEL_ONLY_0_AND_3 -+ if (devsel != 0 && devsel != 3) { -+ printk("*** not 0 or 3\n"); -+ return 0; -+ } -+#endif -+ -+ if (assert && devsel != 0) { -+ // supress signal to cardbus -+ au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF -+ } -+ else { -+ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON -+ } -+ au_sync_udelay(1); -+ return 1; -+} -+ -diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c ---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:54.000000000 +0200 -+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:12.000000000 +0200 -@@ -48,7 +48,7 @@ - #include <asm/mach-au1x00/au1000.h> - - char irq_tab_alchemy[][5] __initdata = { -- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ -+ [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ diff --git a/target/linux/au1000-2.6/patches/009-pci_clear_errors.patch b/target/linux/au1000-2.6/patches/009-pci_clear_errors.patch deleted file mode 100644 index 27282b27c1..0000000000 --- a/target/linux/au1000-2.6/patches/009-pci_clear_errors.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urN linux-2.6.19/arch/mips/pci/ops-au1000.c linux-2.6.19.new/arch/mips/pci/ops-au1000.c ---- linux-2.6.19/arch/mips/pci/ops-au1000.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/pci/ops-au1000.c 2006-12-28 03:02:42.000000000 +0100 -@@ -172,7 +172,11 @@ - error = -1; - DBG("Au1x Master Abort\n"); - } else if ((status >> 28) & 0xf) { -- DBG("PCI ERR detected: status %x\n", status); -+ DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf)); -+ -+ /* clear errors */ -+ au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD); -+ - *data = 0xffffffff; - error = -1; - } diff --git a/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch b/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch index 9fd2e89364..8cb869ee2a 100644 --- a/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch +++ b/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch @@ -376,7 +376,7 @@ diff -urN linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c linux-2.6.19.new/driv + if (adapter->scl_gpio == scl_gpio && + adapter->sda_gpio == sda_gpio) + { -+ i2c_bit_del_bus(&adapter->adapter); ++ i2c_del_adapter(&adapter->adapter); + if (prev) + prev->next = adapter->next; + else diff --git a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch b/target/linux/au1000-2.6/patches/011-mtx1_leds.patch index a99377f815..93c681e964 100644 --- a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch +++ b/target/linux/au1000-2.6/patches/011-mtx1_leds.patch @@ -15,13 +15,13 @@ diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kc comment "LED Triggers" config LEDS_TRIGGERS -diff -urN linux-2.6.19.2/drivers/leds/Makefile linux-2.6.19.2.new/drivers/leds/Makefile ---- linux-2.6.19.2/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/drivers/leds/Makefile 2007-03-02 13:49:35.000000000 +0100 -@@ -13,6 +13,7 @@ - obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o - obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o - obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o +diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile +--- linux-2.6.21.1/drivers/leds/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/drivers/leds/Makefile 2007-05-24 23:39:18.000000000 +0200 +@@ -16,6 +16,7 @@ + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o +obj-$(CONFIG_LEDS_MTX1) += leds-mtx1.o # LED Triggers |