diff options
4 files changed, 207 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts b/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts new file mode 100644 index 0000000000..5d6aebf92f --- /dev/null +++ b/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x.dtsi" + +/ { + compatible = "dlink,dch-g020-a1", "qca,qca9531"; + model = "D-Link DCH-G020 A1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <1>; + + sda-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + + gpio_ext: gpio_ext@38 { + compatible = "nxp,pca9554"; + reg = <0x38 0x1>; + + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@30 { + compatible = "pericom,pt7c43390"; + reg = <0x30 0x8>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + usb_power { + label = "d-link:power:usb"; + gpio-export,name = "d-link:power:usb"; + gpio-export,output = <0>; + gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>; + }; + + zwave_power { + label = "d-link:power:zwave"; + gpio-export,name = "d-link:power:zwave"; + gpio-export,output = <0>; + gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "d-link:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + status { + label = "d-link:red:status"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x10000>; + read-only; + }; + + art: partition@10000 { + label = "art"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "mp"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "bootarg"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xe70000>; + compatible = "denx,uimage"; + }; + + partition@ec0000 { + label = "dlink"; + reg = <0xec0000 0x140000>; + read-only; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +ð0 { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f2b6ef0aed..4580f3ab4e 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -147,6 +147,10 @@ ath79_setup_interfaces() dlink,dap-2695-a1) ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1" ;; + dlink,dch-g020-a1) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:2" "2:lan:1" + ;; dlink,dir-825-b1) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ @@ -379,6 +383,10 @@ ath79_setup_macs() dlink,dap-2695-a1) label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac") ;; + dlink,dch-g020-a1) + lan_mac=$(mtd_get_mac_text "mp" 0x1) + label_mac=$lan_mac + ;; dlink,dir-825-b1) lan_mac=$(mtd_get_mac_text "caldata" 0xffa0) wan_mac=$(mtd_get_mac_text "caldata" 0xffb4) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index f814bd46ad..cf582b8465 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -17,6 +17,9 @@ case "$board" in adtran,bsap1840) macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress ;; + dlink,dch-g020-a1) + mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress + ;; iodata,wn-ac1600dgr) # There is no eeprom data for 5 GHz wlan in "art" partition # which would allow to patch the macaddress diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index d8cac425e8..14e72140dc 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -50,6 +50,17 @@ define Build/cybertan-trx -rm $@-empty.bin endef +define Build/mkdapimg2 + $(STAGING_DIR_HOST)/bin/mkdapimg2 \ + -i $@ -o $@.new \ + -s $(DAP_SIGNATURE) \ + -v $(VERSION_DIST)-$(firstword $(subst +, , \ + $(firstword $(subst -, ,$(REVISION))))) \ + -r Default \ + $(if $(1),-k $(1)) + mv $@.new $@ +endef + define Build/mkmylofw_16m $(eval device_id=$(word 1,$(1))) $(eval revision=$(word 2,$(1))) @@ -563,6 +574,20 @@ define Device/dlink_dap-2695-a1 endef TARGET_DEVICES += dlink_dap-2695-a1 +define Device/dlink_dch-g020-a1 + SOC := qca9531 + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DCH-G020 + DEVICE_VARIANT := A1 + DEVICE_PACKAGES := kmod-gpio-pca953x kmod-i2c-gpio kmod-usb2 kmod-usb-acm + IMAGES += factory.bin + IMAGE_SIZE := 14784k + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | mkdapimg2 0x20000 + DAP_SIGNATURE := HONEYBEE-FIRMWARE-DCH-G020 +endef +TARGET_DEVICES += dlink_dch-g020-a1 + define Device/dlink_dir-505 SOC := ar9330 DEVICE_VENDOR := D-Link |