aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts58
-rw-r--r--target/linux/ath79/image/mikrotik.mk8
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom1
5 files changed, 71 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts
new file mode 100644
index 0000000000..807941c608
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-wap-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD wAP-2nD (wAP)";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_lan_pin>;
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+ led_lan_pin: pinmux_led_lan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index dccb05e45a..a0ce33fa9d 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -90,3 +90,11 @@ define Device/mikrotik_routerboard-wapr-2nd
IMAGE_SIZE := 16256k
endef
TARGET_DEVICES += mikrotik_routerboard-wapr-2nd
+
+define Device/mikrotik_routerboard-wap-2nd
+ $(Device/mikrotik_nor)
+ SOC := qca9533
+ DEVICE_MODEL := RouterBOARD wAP-2nD (wAP)
+ IMAGE_SIZE := 16256k
+endef
+TARGET_DEVICES += mikrotik_routerboard-wap-2nd
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index ecc47e07c2..f5b927ea96 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -7,7 +7,8 @@ board=$(board_name)
case "$board" in
mikrotik,routerboard-lhg-2nd|\
-mikrotik,routerboard-mapl-2nd)
+mikrotik,routerboard-mapl-2nd|\
+mikrotik,routerboard-wap-2nd)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
;;
mikrotik,routerboard-lhg-5nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index cc4121f93e..797d1bba1f 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ath79_setup_interfaces()
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
ucidef_set_interface_lan "eth0"
@@ -43,6 +44,7 @@ ath79_setup_macs()
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
label_mac="$mac_base"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 8b1b5f04dd..3bfcfcc461 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -27,6 +27,7 @@ case "$FIRMWARE" in
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wapr-2nd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1)
;;