diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/TEW-692GR.dts | 23 |
2 files changed, 23 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 0bf1a8a3ba..73404d91b0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -337,8 +337,7 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 3) ;; tew-692gr) - lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 4) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1) ;; tiny-ac) lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts index 5bba8a50b8..1a56710e52 100644 --- a/target/linux/ramips/dts/TEW-692GR.dts +++ b/target/linux/ramips/dts/TEW-692GR.dts @@ -86,7 +86,7 @@ ðernet { status = "okay"; - mtd-mac-address = <&factory 0x28>; + mtd-mac-address = <&factory 0x4>; port@0 { phy-handle = <&phy0>; @@ -98,6 +98,19 @@ phy0: ethernet-phy@0 { reg = <0>; + phy-mode = "rgmii"; + + qca,ar8327-initvals = < + 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */ + 0x50 0xc437c437 /* LED Control Register 0 */ + 0x54 0xc337c337 /* LED Control Register 1 */ + 0x58 0x00000000 /* LED Control Register 2 */ + 0x5c 0x03ffff00 /* LED Control Register 3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; }; }; }; @@ -117,10 +130,18 @@ host-bridge { pci-bridge@1 { status = "okay"; + + wmac@0,0 { + compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604"; + reg = < 0x10000 0 0 0 0 >; + ralink,2ghz = <0>; + }; }; }; }; &wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x0>; ralink,5ghz = <0>; }; |