diff options
| -rw-r--r-- | target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch new file mode 100644 index 0000000000..0ac9adfb96 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch @@ -0,0 +1,86 @@ +From 2025bc9c3a949b65bfd0601f727678b37962c6c5 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski <olek2@wp.pl> +Date: Fri, 4 Jun 2021 18:27:58 +0200 +Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE + +This patch is needed to handle interrupts by the second VPE on the Lantiq +ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to +the second VPE results in a hang. Currently, the vsmp_init_secondary() +function is responsible for enabling these interrupts. It only enables +Malta-specific interrupts (SW0, SW1, HW4 and HW5). + +The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware +interrupts are wired to an ICU instance. Each VPE has an independent +instance of the ICU. The mapping of the ICU interrupts is shown below: +SW0(IP0) - IPI call, +SW1(IP1) - IPI resched, +HW0(IP2) - ICU 0-31, +HW1(IP3) - ICU 32-63, +HW2(IP4) - ICU 64-95, +HW3(IP5) - ICU 96-127, +HW4(IP6) - ICU 128-159, +HW5(IP7) - timer. + +This patch enables all interrupt lines on the second VPE. + +This problem affects multithreaded SoCs with a custom interrupt controller. +SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware +that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the +future, this may be replaced with some generic solution. + +Tested on Lantiq xRX200. + +Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> +Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> +--- + arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++-- + 1 file changed, 24 insertions(+), 2 deletions(-) + +--- a/arch/mips/lantiq/prom.c ++++ b/arch/mips/lantiq/prom.c +@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info; + /* for Multithreading (APRP), vpe.c will use it */ + unsigned long cp0_memsize; + ++/* ++ * These structs are used to override vsmp_init_secondary() ++ */ ++#if defined(CONFIG_MIPS_MT_SMP) ++extern const struct plat_smp_ops vsmp_smp_ops; ++static struct plat_smp_ops lantiq_smp_ops; ++#endif ++ + const char *get_system_type(void) + { + return soc_info.sys_type; +@@ -100,6 +108,17 @@ void __init device_tree_init(void) + unflatten_and_copy_device_tree(); + } + ++#if defined(CONFIG_MIPS_MT_SMP) ++static void lantiq_init_secondary(void) ++{ ++ /* ++ * MIPS CPU startup function vsmp_init_secondary() will only ++ * enable some of the interrupts for the second CPU/VPE. ++ */ ++ set_c0_status(ST0_IM); ++} ++#endif ++ + void __init prom_init(void) + { + /* call the soc specific detetcion code and get it to fill soc_info */ +@@ -111,7 +130,10 @@ void __init prom_init(void) + prom_init_cmdline(); + + #if defined(CONFIG_MIPS_MT_SMP) +- if (register_vsmp_smp_ops()) +- panic("failed to register_vsmp_smp_ops()"); ++ if (cpu_has_mipsmt) { ++ lantiq_smp_ops = vsmp_smp_ops; ++ lantiq_smp_ops.init_secondary = lantiq_init_secondary; ++ register_smp_ops(&lantiq_smp_ops); ++ } + #endif + } |