diff options
5 files changed, 188 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index dd8c2d36d7..39400a33a6 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -26,6 +26,7 @@ devolo,magic-2-wifi|\ engenius,eap300-v2|\ engenius,ecb1200|\ engenius,ecb1750|\ +engenius,ecb350-v1|\ engenius,enh202-v1|\ engenius,ens202ext-v1|\ etactica,eg200|\ diff --git a/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts b/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts new file mode 100644 index 0000000000..8931a206ba --- /dev/null +++ b/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar7242.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "engenius,ecb350-v1", "qca,ar7242"; + model = "EnGenius ECB350 v1"; + + aliases { + label-mac-device = &ath9k; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + wlan { + label = "green:wlan"; + gpios = <&ath9k 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&firmware1 &firmware2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,okli"; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "custom"; + reg = <0x50000 0x50000>; + read-only; + }; + + partition@a0000 { + label = "loader"; + reg = <0xa0000 0x10000>; + read-only; + }; + + firmware2: partition@b0000 { + label = "firmware2"; + reg = <0xb0000 0xf0000>; + }; + + partition@1a0000 { + label = "fakeroot"; + reg = <0x1a0000 0x10000>; + read-only; + }; + + firmware1: partition@1b0000 { + label = "firmware1"; + reg = <0x1b0000 0x4c0000>; + }; + + partition@670000 { + label = "failsafe"; + reg = <0x670000 0x180000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + phy-handle = <&phy4>; + phy-mode = "rgmii-id"; + + pll-data = <0x02000000 0x00000101 0x00001313>; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0,0 { + compatible = "pci168c,002a"; + reg = <0x0 0 0 0 0>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-1)>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index e3e0547ee7..766c0d0712 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -31,6 +31,7 @@ ath79_setup_interfaces() engenius,eap300-v2|\ engenius,ecb1200|\ engenius,ecb1750|\ + engenius,ecb350-v1|\ enterasys,ws-ap3705i|\ glinet,gl-ar300m-lite|\ glinet,gl-usb150|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index ebad4e72cd..2746cf4137 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -75,6 +75,7 @@ case "$FIRMWARE" in caldata_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,wzr-hp-g302h-a1a0|\ + engenius,ecb350-v1|\ engenius,enh202-v1) caldata_extract "art" 0x1000 0xeb8 ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 661d4203ed..333420c827 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -968,6 +968,17 @@ define Device/engenius_ecb1750 endef TARGET_DEVICES += engenius_ecb1750 +define Device/engenius_ecb350-v1 + $(Device/engenius_loader_okli) + SOC := ar7242 + DEVICE_MODEL := ECB350 + DEVICE_VARIANT := v1 + IMAGE_SIZE := 4864k + LOADER_FLASH_OFFS := 0x1b0000 + ENGENIUS_IMGNAME := senao-ecb350 +endef +TARGET_DEVICES += engenius_ecb350-v1 + define Device/engenius_enh202-v1 $(Device/engenius_loader_okli) SOC := ar7240 |