diff options
52 files changed, 0 insertions, 12169 deletions
diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 deleted file mode 100644 index 0adcc25340..0000000000 --- a/target/linux/ipq40xx/config-4.19 +++ /dev/null @@ -1,509 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_AR40XX_PHY=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8960 is not set -# CONFIG_ARCH_MSM8974 is not set -# CONFIG_ARCH_MSM8X60 is not set -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SMMU is not set -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_QCE=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_GF128MUL=y -# CONFIG_CRYPTO_GHASH_ARM_CE is not set -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -# CONFIG_CRYPTO_SHA1_ARM_CE is not set -# CONFIG_CRYPTO_SHA1_ARM_NEON is not set -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_XTS=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_USER is not set -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_ESSEDMA=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_WATCHDOG=y -CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IPQ_GCC_4019=y -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_LP5523=y -CONFIG_LEDS_LP5562=y -CONFIG_LEDS_LP55XX_COMMON=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ40XX=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -CONFIG_MEMFD_CREATE=y -# CONFIG_MFD_QCOM_RPM is not set -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MSM_GCC_8660 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_QCOM=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OPTEE=y -CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -CONFIG_PHY_QCOM_IPQ4019_USB=y -# CONFIG_PHY_QCOM_IPQ806X_SATA is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_UFS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MSM8994 is not set -# CONFIG_PINCTRL_MSM8996 is not set -# CONFIG_PINCTRL_MSM8998 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PINCTRL_SDM845 is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_QCOM_A53PLL=y -CONFIG_QCOM_BAM_DMA=y -# CONFIG_QCOM_COMMAND_DB is not set -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GENI_SE is not set -# CONFIG_QCOM_GSBI is not set -# CONFIG_QCOM_IOMMU is not set -# CONFIG_QCOM_LLCC is not set -# CONFIG_QCOM_PDC is not set -CONFIG_QCOM_PM=y -CONFIG_QCOM_QFPROM=y -# CONFIG_QCOM_RMTFS_MEM is not set -CONFIG_QCOM_SCM=y -CONFIG_QCOM_SCM_32=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMSM is not set -CONFIG_QCOM_TCSR=y -# CONFIG_QCOM_TSENS is not set -CONFIG_QCOM_WDT=y -# CONFIG_QRTR is not set -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_SPMI is not set -CONFIG_REGULATOR_VCTRL=y -CONFIG_REGULATOR_VQMMC_IPQ4019=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_QCOM_AOSS is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SDM_DISPCC_845 is not set -# CONFIG_SDM_GCC_845 is not set -# CONFIG_SDM_VIDEOCC_845 is not set -CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_SPMI_PMIC_CLKDIV is not set -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TEE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/Makefile b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile index 4e6cd6505e..4e6cd6505e 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/Makefile +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c index 5f2630ae50..5f2630ae50 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.c +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.h b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h index 015e5f5026..015e5f5026 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.h +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_axi.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c index 50335b0d14..50335b0d14 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_axi.c +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c index 1270e20a90..1270e20a90 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/ess_edma.h b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h index 021be98a38..021be98a38 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/ess_edma.h +++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c index db21547a03..db21547a03 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c +++ b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.h index 7ba40ccf75..7ba40ccf75 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h +++ b/target/linux/ipq40xx/files/drivers/net/phy/ar40xx.h diff --git a/target/linux/ipq40xx/patches-4.19/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-4.19/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch deleted file mode 100644 index c8aa9f4c95..0000000000 --- a/target/linux/ipq40xx/patches-4.19/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag - -Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by -the qce driver, since they are all hardware accelerated, accessible -through a kernel driver only, and not available directly to userspace. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/ablkcipher.c -+++ b/drivers/crypto/qce/ablkcipher.c -@@ -370,7 +370,7 @@ static int qce_ablkcipher_register_one(c - - alg->cra_priority = 300; - alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK; -+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->cra_alignmask = 0; - alg->cra_type = &crypto_ablkcipher_type; ---- a/drivers/crypto/qce/sha.c -+++ b/drivers/crypto/qce/sha.c -@@ -503,7 +503,7 @@ static int qce_ahash_register_one(const - base = &alg->halg.base; - base->cra_blocksize = def->blocksize; - base->cra_priority = 300; -- base->cra_flags = CRYPTO_ALG_ASYNC; -+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; - base->cra_ctxsize = sizeof(struct qce_sha_ctx); - base->cra_alignmask = 0; - base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-4.19/040-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-4.19/040-crypto-qce-switch-to-skcipher-API.patch deleted file mode 100644 index f13f614fd4..0000000000 --- a/target/linux/ipq40xx/patches-4.19/040-crypto-qce-switch-to-skcipher-API.patch +++ /dev/null @@ -1,973 +0,0 @@ -From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001 -From: Ard Biesheuvel <ardb@kernel.org> -Date: Tue, 5 Nov 2019 14:28:17 +0100 -Subject: [PATCH] crypto: qce - switch to skcipher API - -Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") -dated 20 august 2015 introduced the new skcipher API which is supposed to -replace both blkcipher and ablkcipher. While all consumers of the API have -been converted long ago, some producers of the ablkcipher remain, forcing -us to keep the ablkcipher support routines alive, along with the matching -code to expose [a]blkciphers via the skcipher API. - -So switch this driver to the skcipher API, allowing us to finally drop the -blkcipher code in the near future. - -Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> -Signed-off-by: Ard Biesheuvel <ardb@kernel.org> -Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -4,4 +4,4 @@ qcrypto-objs := core.o \ - common.o \ - dma.o \ - sha.o \ -- ablkcipher.o -+ skcipher.o ---- a/drivers/crypto/qce/cipher.h -+++ b/drivers/crypto/qce/cipher.h -@@ -53,12 +53,12 @@ struct qce_cipher_reqctx { - unsigned int cryptlen; - }; - --static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm) -+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm) - { -- struct crypto_alg *alg = tfm->__crt_alg; -- return container_of(alg, struct qce_alg_template, alg.crypto); -+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm); -+ return container_of(alg, struct qce_alg_template, alg.skcipher); - } - --extern const struct qce_algo_ops ablkcipher_ops; -+extern const struct qce_algo_ops skcipher_ops; - - #endif /* _CIPHER_H_ */ ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -312,13 +312,13 @@ go_proc: - return 0; - } - --static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req, -+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; - __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0}; - __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0}; -@@ -397,8 +397,8 @@ int qce_start(struct crypto_async_reques - u32 offset) - { - switch (type) { -- case CRYPTO_ALG_TYPE_ABLKCIPHER: -- return qce_setup_regs_ablkcipher(async_req, totallen, offset); -+ case CRYPTO_ALG_TYPE_SKCIPHER: -+ return qce_setup_regs_skcipher(async_req, totallen, offset); - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); - default: ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -18,6 +18,7 @@ - #include <linux/types.h> - #include <crypto/aes.h> - #include <crypto/hash.h> -+#include <crypto/internal/skcipher.h> - - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 -@@ -87,7 +88,7 @@ struct qce_alg_template { - unsigned long alg_flags; - const u32 *std_iv; - union { -- struct crypto_alg crypto; -+ struct skcipher_alg skcipher; - struct ahash_alg ahash; - } alg; - struct qce_device *qce; ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -30,7 +30,7 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -- &ablkcipher_ops, -+ &skcipher_ops, - &ahash_ops, - }; - ---- a/drivers/crypto/qce/ablkcipher.c -+++ /dev/null -@@ -1,431 +0,0 @@ --/* -- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 and -- * only version 2 as published by the Free Software Foundation. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- */ -- --#include <linux/device.h> --#include <linux/interrupt.h> --#include <linux/types.h> --#include <crypto/aes.h> --#include <crypto/des.h> --#include <crypto/internal/skcipher.h> -- --#include "cipher.h" -- --static LIST_HEAD(ablkcipher_algs); -- --static void qce_ablkcipher_done(void *data) --{ -- struct crypto_async_request *async_req = data; -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- u32 status; -- int error; -- bool diff_dst; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- error = qce_dma_terminate_all(&qce->dma); -- if (error) -- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n", -- error); -- -- if (diff_dst) -- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- -- sg_free_table(&rctx->dst_tbl); -- -- error = qce_check_status(qce, &status); -- if (error < 0) -- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status); -- -- qce->async_req_done(tmpl->qce, error); --} -- --static int --qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req) --{ -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- struct scatterlist *sg; -- bool diff_dst; -- gfp_t gfp; -- int ret; -- -- rctx->iv = req->info; -- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher); -- rctx->cryptlen = req->nbytes; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes); -- if (diff_dst) -- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes); -- else -- rctx->dst_nents = rctx->src_nents; -- if (rctx->src_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of src SG.\n"); -- return rctx->src_nents; -- } -- if (rctx->dst_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -- return -rctx->dst_nents; -- } -- -- rctx->dst_nents += 1; -- -- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -- GFP_KERNEL : GFP_ATOMIC; -- -- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -- if (ret) -- return ret; -- -- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -- -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg_mark_end(sg); -- rctx->dst_sg = rctx->dst_tbl.sgl; -- -- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- if (ret < 0) -- goto error_free; -- -- if (diff_dst) { -- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -- if (ret < 0) -- goto error_unmap_dst; -- rctx->src_sg = req->src; -- } else { -- rctx->src_sg = rctx->dst_sg; -- } -- -- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -- rctx->dst_sg, rctx->dst_nents, -- qce_ablkcipher_done, async_req); -- if (ret) -- goto error_unmap_src; -- -- qce_dma_issue_pending(&qce->dma); -- -- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0); -- if (ret) -- goto error_terminate; -- -- return 0; -- --error_terminate: -- qce_dma_terminate_all(&qce->dma); --error_unmap_src: -- if (diff_dst) -- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); --error_unmap_dst: -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); --error_free: -- sg_free_table(&rctx->dst_tbl); -- return ret; --} -- --static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- unsigned long flags = to_cipher_tmpl(tfm)->alg_flags; -- int ret; -- -- if (!key || !keylen) -- return -EINVAL; -- -- if (IS_AES(flags)) { -- switch (keylen) { -- case AES_KEYSIZE_128: -- case AES_KEYSIZE_256: -- break; -- default: -- goto fallback; -- } -- } else if (IS_DES(flags)) { -- u32 tmp[DES_EXPKEY_WORDS]; -- -- ret = des_ekey(tmp, key); -- if (!ret && crypto_ablkcipher_get_flags(ablk) & -- CRYPTO_TFM_REQ_WEAK_KEY) -- goto weakkey; -- } -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: -- ret = crypto_skcipher_setkey(ctx->fallback, key, keylen); -- if (!ret) -- ctx->enc_keylen = keylen; -- return ret; --weakkey: -- crypto_ablkcipher_set_flags(ablk, CRYPTO_TFM_RES_WEAK_KEY); -- return -EINVAL; --} -- --static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt) --{ -- struct crypto_tfm *tfm = -- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req)); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -- int ret; -- -- rctx->flags = tmpl->alg_flags; -- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -- -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -- SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -- -- skcipher_request_set_tfm(subreq, ctx->fallback); -- skcipher_request_set_callback(subreq, req->base.flags, -- NULL, NULL); -- skcipher_request_set_crypt(subreq, req->src, req->dst, -- req->nbytes, req->info); -- ret = encrypt ? crypto_skcipher_encrypt(subreq) : -- crypto_skcipher_decrypt(subreq); -- skcipher_request_zero(subreq); -- return ret; -- } -- -- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); --} -- --static int qce_ablkcipher_encrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 1); --} -- --static int qce_ablkcipher_decrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 0); --} -- --static int qce_ablkcipher_init(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- memset(ctx, 0, sizeof(*ctx)); -- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx); -- -- ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(tfm), 0, -- CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK); -- return PTR_ERR_OR_ZERO(ctx->fallback); --} -- --static void qce_ablkcipher_exit(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- crypto_free_skcipher(ctx->fallback); --} -- --struct qce_ablkcipher_def { -- unsigned long flags; -- const char *name; -- const char *drv_name; -- unsigned int blocksize; -- unsigned int ivsize; -- unsigned int min_keysize; -- unsigned int max_keysize; --}; -- --static const struct qce_ablkcipher_def ablkcipher_def[] = { -- { -- .flags = QCE_ALG_AES | QCE_MODE_ECB, -- .name = "ecb(aes)", -- .drv_name = "ecb-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CBC, -- .name = "cbc(aes)", -- .drv_name = "cbc-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CTR, -- .name = "ctr(aes)", -- .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_XTS, -- .name = "xts(aes)", -- .drv_name = "xts-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_ECB, -- .name = "ecb(des)", -- .drv_name = "ecb-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_CBC, -- .name = "cbc(des)", -- .drv_name = "cbc-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = DES_BLOCK_SIZE, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_ECB, -- .name = "ecb(des3_ede)", -- .drv_name = "ecb-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_CBC, -- .name = "cbc(des3_ede)", -- .drv_name = "cbc-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = DES3_EDE_BLOCK_SIZE, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, --}; -- --static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def, -- struct qce_device *qce) --{ -- struct qce_alg_template *tmpl; -- struct crypto_alg *alg; -- int ret; -- -- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -- if (!tmpl) -- return -ENOMEM; -- -- alg = &tmpl->alg.crypto; -- -- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -- def->drv_name); -- -- alg->cra_blocksize = def->blocksize; -- alg->cra_ablkcipher.ivsize = def->ivsize; -- alg->cra_ablkcipher.min_keysize = def->min_keysize; -- alg->cra_ablkcipher.max_keysize = def->max_keysize; -- alg->cra_ablkcipher.setkey = qce_ablkcipher_setkey; -- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt; -- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt; -- -- alg->cra_priority = 300; -- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; -- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); -- alg->cra_alignmask = 0; -- alg->cra_type = &crypto_ablkcipher_type; -- alg->cra_module = THIS_MODULE; -- alg->cra_init = qce_ablkcipher_init; -- alg->cra_exit = qce_ablkcipher_exit; -- INIT_LIST_HEAD(&alg->cra_list); -- -- INIT_LIST_HEAD(&tmpl->entry); -- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER; -- tmpl->alg_flags = def->flags; -- tmpl->qce = qce; -- -- ret = crypto_register_alg(alg); -- if (ret) { -- kfree(tmpl); -- dev_err(qce->dev, "%s registration failed\n", alg->cra_name); -- return ret; -- } -- -- list_add_tail(&tmpl->entry, &ablkcipher_algs); -- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name); -- return 0; --} -- --static void qce_ablkcipher_unregister(struct qce_device *qce) --{ -- struct qce_alg_template *tmpl, *n; -- -- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) { -- crypto_unregister_alg(&tmpl->alg.crypto); -- list_del(&tmpl->entry); -- kfree(tmpl); -- } --} -- --static int qce_ablkcipher_register(struct qce_device *qce) --{ -- int ret, i; -- -- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) { -- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce); -- if (ret) -- goto err; -- } -- -- return 0; --err: -- qce_ablkcipher_unregister(qce); -- return ret; --} -- --const struct qce_algo_ops ablkcipher_ops = { -- .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -- .register_algs = qce_ablkcipher_register, -- .unregister_algs = qce_ablkcipher_unregister, -- .async_req_handle = qce_ablkcipher_async_req_handle, --}; ---- /dev/null -+++ b/drivers/crypto/qce/skcipher.c -@@ -0,0 +1,429 @@ -+/* -+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/device.h> -+#include <linux/interrupt.h> -+#include <linux/types.h> -+#include <crypto/aes.h> -+#include <crypto/des.h> -+#include <crypto/internal/skcipher.h> -+ -+#include "cipher.h" -+ -+static LIST_HEAD(skcipher_algs); -+ -+static void qce_skcipher_done(void *data) -+{ -+ struct crypto_async_request *async_req = data; -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ u32 status; -+ int error; -+ bool diff_dst; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ error = qce_dma_terminate_all(&qce->dma); -+ if (error) -+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n", -+ error); -+ -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ -+ sg_free_table(&rctx->dst_tbl); -+ -+ error = qce_check_status(qce, &status); -+ if (error < 0) -+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); -+ -+ qce->async_req_done(tmpl->qce, error); -+} -+ -+static int -+qce_skcipher_async_req_handle(struct crypto_async_request *async_req) -+{ -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ struct scatterlist *sg; -+ bool diff_dst; -+ gfp_t gfp; -+ int ret; -+ -+ rctx->iv = req->iv; -+ rctx->ivsize = crypto_skcipher_ivsize(skcipher); -+ rctx->cryptlen = req->cryptlen; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen); -+ if (diff_dst) -+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen); -+ else -+ rctx->dst_nents = rctx->src_nents; -+ if (rctx->src_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of src SG.\n"); -+ return rctx->src_nents; -+ } -+ if (rctx->dst_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -+ return -rctx->dst_nents; -+ } -+ -+ rctx->dst_nents += 1; -+ -+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -+ GFP_KERNEL : GFP_ATOMIC; -+ -+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -+ if (ret) -+ return ret; -+ -+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg_mark_end(sg); -+ rctx->dst_sg = rctx->dst_tbl.sgl; -+ -+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ if (ret < 0) -+ goto error_free; -+ -+ if (diff_dst) { -+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+ if (ret < 0) -+ goto error_unmap_dst; -+ rctx->src_sg = req->src; -+ } else { -+ rctx->src_sg = rctx->dst_sg; -+ } -+ -+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -+ rctx->dst_sg, rctx->dst_nents, -+ qce_skcipher_done, async_req); -+ if (ret) -+ goto error_unmap_src; -+ -+ qce_dma_issue_pending(&qce->dma); -+ -+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0); -+ if (ret) -+ goto error_terminate; -+ -+ return 0; -+ -+error_terminate: -+ qce_dma_terminate_all(&qce->dma); -+error_unmap_src: -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+error_unmap_dst: -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+error_free: -+ sg_free_table(&rctx->dst_tbl); -+ return ret; -+} -+ -+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); -+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags; -+ int ret; -+ -+ if (!key || !keylen) -+ return -EINVAL; -+ -+ if (IS_AES(flags)) { -+ switch (keylen) { -+ case AES_KEYSIZE_128: -+ case AES_KEYSIZE_256: -+ break; -+ default: -+ goto fallback; -+ } -+ } else if (IS_DES(flags)) { -+ u32 tmp[DES_EXPKEY_WORDS]; -+ -+ ret = des_ekey(tmp, key); -+ if (!ret && crypto_skcipher_get_flags(ablk) & -+ CRYPTO_TFM_REQ_WEAK_KEY) -+ goto weakkey; -+ } -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+fallback: -+ ret = crypto_skcipher_setkey(ctx->fallback, key, keylen); -+ if (!ret) -+ ctx->enc_keylen = keylen; -+ return ret; -+weakkey: -+ crypto_skcipher_set_flags(ablk, CRYPTO_TFM_RES_WEAK_KEY); -+ return -EINVAL; -+} -+ -+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt) -+{ -+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int ret; -+ -+ rctx->flags = tmpl->alg_flags; -+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ -+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -+ ctx->enc_keylen != AES_KEYSIZE_256) { -+ SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -+ -+ skcipher_request_set_tfm(subreq, ctx->fallback); -+ skcipher_request_set_callback(subreq, req->base.flags, -+ NULL, NULL); -+ skcipher_request_set_crypt(subreq, req->src, req->dst, -+ req->cryptlen, req->iv); -+ ret = encrypt ? crypto_skcipher_encrypt(subreq) : -+ crypto_skcipher_decrypt(subreq); -+ skcipher_request_zero(subreq); -+ return ret; -+ } -+ -+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); -+} -+ -+static int qce_skcipher_encrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 1); -+} -+ -+static int qce_skcipher_decrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 0); -+} -+ -+static int qce_skcipher_init(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ memset(ctx, 0, sizeof(*ctx)); -+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ -+ ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(&tfm->base), -+ 0, CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK); -+ return PTR_ERR_OR_ZERO(ctx->fallback); -+} -+ -+static void qce_skcipher_exit(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ crypto_free_skcipher(ctx->fallback); -+} -+ -+struct qce_skcipher_def { -+ unsigned long flags; -+ const char *name; -+ const char *drv_name; -+ unsigned int blocksize; -+ unsigned int ivsize; -+ unsigned int min_keysize; -+ unsigned int max_keysize; -+}; -+ -+static const struct qce_skcipher_def skcipher_def[] = { -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_ECB, -+ .name = "ecb(aes)", -+ .drv_name = "ecb-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CBC, -+ .name = "cbc(aes)", -+ .drv_name = "cbc-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CTR, -+ .name = "ctr(aes)", -+ .drv_name = "ctr-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_XTS, -+ .name = "xts(aes)", -+ .drv_name = "xts-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_ECB, -+ .name = "ecb(des)", -+ .drv_name = "ecb-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_CBC, -+ .name = "cbc(des)", -+ .drv_name = "cbc-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = DES_BLOCK_SIZE, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_ECB, -+ .name = "ecb(des3_ede)", -+ .drv_name = "ecb-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_CBC, -+ .name = "cbc(des3_ede)", -+ .drv_name = "cbc-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+}; -+ -+static int qce_skcipher_register_one(const struct qce_skcipher_def *def, -+ struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl; -+ struct skcipher_alg *alg; -+ int ret; -+ -+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -+ if (!tmpl) -+ return -ENOMEM; -+ -+ alg = &tmpl->alg.skcipher; -+ -+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -+ def->drv_name); -+ -+ alg->base.cra_blocksize = def->blocksize; -+ alg->ivsize = def->ivsize; -+ alg->min_keysize = def->min_keysize; -+ alg->max_keysize = def->max_keysize; -+ alg->setkey = qce_skcipher_setkey; -+ alg->encrypt = qce_skcipher_encrypt; -+ alg->decrypt = qce_skcipher_decrypt; -+ -+ alg->base.cra_priority = 300; -+ alg->base.cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK | -+ CRYPTO_ALG_KERN_DRIVER_ONLY; -+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); -+ alg->base.cra_alignmask = 0; -+ alg->base.cra_module = THIS_MODULE; -+ -+ alg->init = qce_skcipher_init; -+ alg->exit = qce_skcipher_exit; -+ -+ INIT_LIST_HEAD(&tmpl->entry); -+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; -+ tmpl->alg_flags = def->flags; -+ tmpl->qce = qce; -+ -+ ret = crypto_register_skcipher(alg); -+ if (ret) { -+ kfree(tmpl); -+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name); -+ return ret; -+ } -+ -+ list_add_tail(&tmpl->entry, &skcipher_algs); -+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name); -+ return 0; -+} -+ -+static void qce_skcipher_unregister(struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl, *n; -+ -+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) { -+ crypto_unregister_skcipher(&tmpl->alg.skcipher); -+ list_del(&tmpl->entry); -+ kfree(tmpl); -+ } -+} -+ -+static int qce_skcipher_register(struct qce_device *qce) -+{ -+ int ret, i; -+ -+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) { -+ ret = qce_skcipher_register_one(&skcipher_def[i], qce); -+ if (ret) -+ goto err; -+ } -+ -+ return 0; -+err: -+ qce_skcipher_unregister(qce); -+ return ret; -+} -+ -+const struct qce_algo_ops skcipher_ops = { -+ .type = CRYPTO_ALG_TYPE_SKCIPHER, -+ .register_algs = qce_skcipher_register, -+ .unregister_algs = qce_skcipher_unregister, -+ .async_req_handle = qce_skcipher_async_req_handle, -+}; diff --git a/target/linux/ipq40xx/patches-4.19/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-4.19/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch deleted file mode 100644 index 59f7445a15..0000000000 --- a/target/linux/ipq40xx/patches-4.19/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 3f5598286445f695bb63a22239dd3603c69a6eaf Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Mon, 28 Oct 2019 09:03:07 -0300 -Subject: [PATCH] crypto: qce - fix ctr-aes-qce block, chunk sizes - -Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher, -adding the definition for chucksize instead, where the underlying block -size belongs. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -261,6 +261,7 @@ struct qce_skcipher_def { - const char *name; - const char *drv_name; - unsigned int blocksize; -+ unsigned int chunksize; - unsigned int ivsize; - unsigned int min_keysize; - unsigned int max_keysize; -@@ -289,7 +290,8 @@ static const struct qce_skcipher_def skc - .flags = QCE_ALG_AES | QCE_MODE_CTR, - .name = "ctr(aes)", - .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -+ .blocksize = 1, -+ .chunksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, -@@ -359,6 +361,7 @@ static int qce_skcipher_register_one(con - def->drv_name); - - alg->base.cra_blocksize = def->blocksize; -+ alg->chunksize = def->chunksize; - alg->ivsize = def->ivsize; - alg->min_keysize = def->min_keysize; - alg->max_keysize = def->max_keysize; diff --git a/target/linux/ipq40xx/patches-4.19/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-4.19/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch deleted file mode 100644 index 50b888351c..0000000000 --- a/target/linux/ipq40xx/patches-4.19/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 0138c3c13809250338d7cfba6f4ca3b2da02b2c8 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Thu, 21 Nov 2019 14:28:23 -0300 -Subject: [PATCH] crypto: qce - fix xts-aes-qce key sizes - -XTS-mode uses two keys, so the keysizes should be doubled in -skcipher_def, and halved when checking if it is AES-128/192/256. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -168,7 +168,7 @@ static int qce_skcipher_setkey(struct cr - return -EINVAL; - - if (IS_AES(flags)) { -- switch (keylen) { -+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) { - case AES_KEYSIZE_128: - case AES_KEYSIZE_256: - break; -@@ -203,13 +203,15 @@ static int qce_skcipher_crypt(struct skc - struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int keylen; - int ret; - - rctx->flags = tmpl->alg_flags; - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -+ keylen != AES_KEYSIZE_256) { - SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_tfm(subreq, ctx->fallback); -@@ -302,8 +304,8 @@ static const struct qce_skcipher_def skc - .drv_name = "xts-aes-qce", - .blocksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE * 2, -+ .max_keysize = AES_MAX_KEY_SIZE * 2, - }, - { - .flags = QCE_ALG_DES | QCE_MODE_ECB, diff --git a/target/linux/ipq40xx/patches-4.19/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-4.19/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch deleted file mode 100644 index 95650690fb..0000000000 --- a/target/linux/ipq40xx/patches-4.19/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 31f796293b6c38126a466414c565827b9cfdbe39 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Wed, 20 Nov 2019 21:39:11 -0300 -Subject: [PATCH] crypto: qce - save a sg table slot for result buf - -When ctr-aes-qce is used for gcm-mode, an extra sg entry for the -authentication tag is present, causing trouble when the qce driver -prepares the dst-results eg table for dma. - -It computes the number of entries needed with sg_nents_for_len, leaving -out the tag entry. Then it creates a sg table with that number plus -one, used to store a "result" sg. - -When copying the sg table, it does not limit the number of entries -copied, so tha extra slot is filled with the authentication tag sg. -When the driver tries to add the result sg, the list is full, and it -returns EINVAL. - -By limiting the number of sg entries copied to the dest table, the slot -for the result buffer is guaranteed to be unused. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -55,7 +55,8 @@ void qce_dma_release(struct qce_dma_data - } - - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl) -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -+ int max_ents) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; - -@@ -68,12 +69,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg) { -+ while (new_sgl && sg && max_ents) { - sg_set_page(sg, sg_page(new_sgl), new_sgl->length, - new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -+ max_ents--; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -50,6 +50,7 @@ int qce_dma_prep_sgs(struct qce_dma_data - void qce_dma_issue_pending(struct qce_dma_data *dma); - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add); -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -+ int max_ents); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -103,13 +103,13 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-4.19/044-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-4.19/044-crypto-qce-update-the-skcipher-IV.patch deleted file mode 100644 index 33be510a82..0000000000 --- a/target/linux/ipq40xx/patches-4.19/044-crypto-qce-update-the-skcipher-IV.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 502ca0b7c1d856a46dbd78e67690c12c47775b97 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Fri, 22 Nov 2019 09:00:02 -0300 -Subject: [PATCH] crypto: qce - update the skcipher IV - -Update the IV after the completion of each cipher operation. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -29,6 +29,7 @@ static void qce_skcipher_done(void *data - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; -+ struct qce_result_dump *result_buf = qce->dma.result_buf; - enum dma_data_direction dir_src, dir_dst; - u32 status; - int error; -@@ -53,6 +54,7 @@ static void qce_skcipher_done(void *data - if (error < 0) - dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); - -+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize); - qce->async_req_done(tmpl->qce, error); - } - diff --git a/target/linux/ipq40xx/patches-4.19/046-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-4.19/046-crypto-qce-initialize-fallback-only-for-AES.patch deleted file mode 100644 index e3adaf864e..0000000000 --- a/target/linux/ipq40xx/patches-4.19/046-crypto-qce-initialize-fallback-only-for-AES.patch +++ /dev/null @@ -1,54 +0,0 @@ -From f2a33ce18232919d3831d1c61a06b6067209282d Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Fri, 22 Nov 2019 09:34:29 -0300 -Subject: [PATCH] crypto: qce - initialize fallback only for AES - -Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where -AES-192 is not handled by the qce hardware, and don't allocate & free -the fallback skcipher for anything other than AES. - -The rest of the code is unchanged, as the use of the fallback is already -restricted to AES. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -246,7 +246,15 @@ static int qce_skcipher_init(struct cryp - - memset(ctx, 0, sizeof(*ctx)); - crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ return 0; -+} -+ -+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ int ret; - -+ qce_skcipher_init(tfm); - ctx->fallback = crypto_alloc_skcipher(crypto_tfm_alg_name(&tfm->base), - 0, CRYPTO_ALG_ASYNC | - CRYPTO_ALG_NEED_FALLBACK); -@@ -375,14 +383,18 @@ static int qce_skcipher_register_one(con - - alg->base.cra_priority = 300; - alg->base.cra_flags = CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | - CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->base.cra_alignmask = 0; - alg->base.cra_module = THIS_MODULE; - -- alg->init = qce_skcipher_init; -- alg->exit = qce_skcipher_exit; -+ if (IS_AES(def->flags)) { -+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK; -+ alg->init = qce_skcipher_init_fallback; -+ alg->exit = qce_skcipher_exit; -+ } else { -+ alg->init = qce_skcipher_init; -+ } - - INIT_LIST_HEAD(&tmpl->entry); - tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; diff --git a/target/linux/ipq40xx/patches-4.19/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-4.19/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch deleted file mode 100644 index aabc8fd622..0000000000 --- a/target/linux/ipq40xx/patches-4.19/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 686aa4db696270dadc5e8b2971769e1676251ff1 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Fri, 31 Jan 2020 17:43:16 -0300 -Subject: [PATCH] crypto: qce - use cryptlen when adding extra sgl - -The qce crypto driver appends an extra entry to the dst sgl, to maintain -private state information. - -When the gcm driver sends requests to the ctr skcipher, it passes the -authentication tag after the actual crypto payload, but it must not be -touched. - -Commit 1336c2221bee ("crypto: qce - save a sg table slot for result -buf") limited the destination sgl to avoid overwriting the -authentication tag but it assumed the tag would be in a separate sgl -entry. - -This is not always the case, so it is better to limit the length of the -destination buffer to req->cryptlen before appending the result buf. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -56,9 +56,10 @@ void qce_dma_release(struct qce_dma_data - - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -- int max_ents) -+ unsigned int max_len) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; -+ unsigned int new_len; - - while (sg) { - if (!sg_page(sg)) -@@ -69,13 +70,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg && max_ents) { -- sg_set_page(sg, sg_page(new_sgl), new_sgl->length, -- new_sgl->offset); -+ while (new_sgl && sg && max_len) { -+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length; -+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -- max_ents--; -+ max_len -= new_len; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -51,6 +51,6 @@ void qce_dma_issue_pending(struct qce_dm - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -- int max_ents); -+ unsigned int max_len); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -105,13 +105,14 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, -+ QCE_RESULT_BUF_SZ); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-4.19/048-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-4.19/048-crypto-qce-use-AES-fallback-for-small-requests.patch deleted file mode 100644 index 514fde7b63..0000000000 --- a/target/linux/ipq40xx/patches-4.19/048-crypto-qce-use-AES-fallback-for-small-requests.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 2d3b6fae7d1a2ad821769440daa91d7eec5c8250 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Fri, 20 Dec 2019 09:41:44 -0300 -Subject: [PATCH] crypto: qce - use AES fallback for small requests - -Process small blocks using the fallback cipher, as a workaround for an -observed failure (DMA-related, apparently) when computing the GCM ghash -key. This brings a speed gain as well, since it avoids the latency of -using the hardware engine to process small blocks. - -Using software for all 16-byte requests would be enough to make GCM -work, but to increase performance, a larger threshold would be better. -Measuring the performance of supported ciphers with openssl speed, -software matches hardware at around 768-1024 bytes. - -Considering the 256-bit ciphers, software is 2-3 times faster than qce -at 256-bytes, 30% faster at 512, and about even at 768-bytes. With -128-bit keys, the break-even point would be around 1024-bytes. - -This adds the 'aes_sw_max_len' parameter, to set the largest request -length processed by the software fallback. Its default is being set to -512 bytes, a little lower than the break-even point, to balance the cost -in CPU usage. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -585,6 +585,29 @@ config CRYPTO_DEV_QCE - hardware. To compile this driver as a module, choose M here. The - module will be called qcrypto. - -+config CRYPTO_DEV_QCE_SW_MAX_LEN -+ int "Default maximum request size to use software for AES" -+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER -+ default 512 -+ help -+ This sets the default maximum request size to perform AES requests -+ using software instead of the crypto engine. It can be changed by -+ setting the aes_sw_max_len parameter. -+ -+ Small blocks are processed faster in software than hardware. -+ Considering the 256-bit ciphers, software is 2-3 times faster than -+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. -+ With 128-bit keys, the break-even point would be around 1024-bytes. -+ -+ The default is set a little lower, to 512 bytes, to balance the -+ cost in CPU usage. The minimum recommended setting is 16-bytes -+ (1 AES block), since AES-GCM will fail if you set it lower. -+ Setting this to zero will send all requests to the hardware. -+ -+ Note that 192-bit keys are not supported by the hardware and are -+ always processed by the software fallback, and all DES requests -+ are done by the hardware. -+ - config CRYPTO_DEV_QCOM_RNG - tristate "Qualcomm Random Number Generator Driver" - depends on ARCH_QCOM || COMPILE_TEST ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -13,6 +13,7 @@ - - #include <linux/device.h> - #include <linux/interrupt.h> -+#include <linux/moduleparam.h> - #include <linux/types.h> - #include <crypto/aes.h> - #include <crypto/des.h> -@@ -20,6 +21,13 @@ - - #include "cipher.h" - -+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN; -+module_param(aes_sw_max_len, uint, 0644); -+MODULE_PARM_DESC(aes_sw_max_len, -+ "Only use hardware for AES requests larger than this " -+ "[0=always use hardware; anything <16 breaks AES-GCM; default=" -+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]"); -+ - static LIST_HEAD(skcipher_algs); - - static void qce_skcipher_done(void *data) -@@ -170,15 +178,7 @@ static int qce_skcipher_setkey(struct cr - if (!key || !keylen) - return -EINVAL; - -- if (IS_AES(flags)) { -- switch (IS_XTS(flags) ? keylen >> 1 : keylen) { -- case AES_KEYSIZE_128: -- case AES_KEYSIZE_256: -- break; -- default: -- goto fallback; -- } -- } else if (IS_DES(flags)) { -+ if (IS_DES(flags)) { - u32 tmp[DES_EXPKEY_WORDS]; - - ret = des_ekey(tmp, key); -@@ -189,8 +189,8 @@ static int qce_skcipher_setkey(struct cr - - ctx->enc_keylen = keylen; - memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: -+ if (!IS_AES(flags)) -+ return 0; - ret = crypto_skcipher_setkey(ctx->fallback, key, keylen); - if (!ret) - ctx->enc_keylen = keylen; -@@ -213,8 +213,9 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -- keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && -+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len)) { - SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-4.19/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-4.19/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch deleted file mode 100644 index 00dc3791ab..0000000000 --- a/target/linux/ipq40xx/patches-4.19/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch +++ /dev/null @@ -1,53 +0,0 @@ -From bbf2b1cf22dc98f3df33b6666df046dfb9564d91 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Wed, 5 Feb 2020 13:42:25 -0300 -Subject: [PATCH] crypto: qce - handle AES-XTS cases that qce fails - -QCE hangs when presented with an AES-XTS request whose length is larger -than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the -fallback cipher handle them. - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -23,8 +23,6 @@ - #include "regs-v5.h" - #include "sha.h" - --#define QCE_SECTOR_SIZE 512 -- - static inline u32 qce_read(struct qce_device *qce, u32 offset) - { - return readl(qce->base + offset); ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -20,6 +20,9 @@ - #include <crypto/hash.h> - #include <crypto/internal/skcipher.h> - -+/* xts du size */ -+#define QCE_SECTOR_SIZE 512 -+ - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 - #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256 ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -213,9 +213,14 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and -+ * is not a multiple of it; pass such requests to the fallback -+ */ - if (IS_AES(rctx->flags) && -- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -- req->cryptlen <= aes_sw_max_len)) { -+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len) || -+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE && -+ req->cryptlen % QCE_SECTOR_SIZE))) { - SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-4.19/051-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-4.19/051-crypto-qce-allow-building-only-hashes-ciphers.patch deleted file mode 100644 index 11f711940d..0000000000 --- a/target/linux/ipq40xx/patches-4.19/051-crypto-qce-allow-building-only-hashes-ciphers.patch +++ /dev/null @@ -1,406 +0,0 @@ -From 62134842498927a0fcc19798a615340a7a6a9e62 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz <cotequeiroz@gmail.com> -Date: Mon, 28 Oct 2019 15:17:19 -0300 -Subject: [PATCH] crypto: qce - allow building only hashes/ciphers - -Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -573,6 +573,14 @@ config CRYPTO_DEV_QCE - tristate "Qualcomm crypto engine accelerator" - depends on ARCH_QCOM || COMPILE_TEST - depends on HAS_IOMEM -+ help -+ This driver supports Qualcomm crypto engine accelerator -+ hardware. To compile this driver as a module, choose M here. The -+ module will be called qcrypto. -+ -+config CRYPTO_DEV_QCE_SKCIPHER -+ bool -+ depends on CRYPTO_DEV_QCE - select CRYPTO_AES - select CRYPTO_DES - select CRYPTO_ECB -@@ -580,10 +588,57 @@ config CRYPTO_DEV_QCE - select CRYPTO_XTS - select CRYPTO_CTR - select CRYPTO_BLKCIPHER -+ -+config CRYPTO_DEV_QCE_SHA -+ bool -+ depends on CRYPTO_DEV_QCE -+ -+choice -+ prompt "Algorithms enabled for QCE acceleration" -+ default CRYPTO_DEV_QCE_ENABLE_ALL -+ depends on CRYPTO_DEV_QCE - help -- This driver supports Qualcomm crypto engine accelerator -- hardware. To compile this driver as a module, choose M here. The -- module will be called qcrypto. -+ This option allows to choose whether to build support for all algorihtms -+ (default), hashes-only, or skciphers-only. -+ -+ The QCE engine does not appear to scale as well as the CPU to handle -+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the -+ QCE handles only 2 requests in parallel. -+ -+ Ipsec throughput seems to improve when disabling either family of -+ algorithms, sharing the load with the CPU. Enabling skciphers-only -+ appears to work best. -+ -+ config CRYPTO_DEV_QCE_ENABLE_ALL -+ bool "All supported algorithms" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable all supported algorithms: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (CBC, ECB) -+ - DES (CBC, ECB) -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER -+ bool "Symmetric-key ciphers only" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ help -+ Enable symmetric-key ciphers only: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (ECB, CBC) -+ - DES (ECB, CBC) -+ -+ config CRYPTO_DEV_QCE_ENABLE_SHA -+ bool "Hash/HMAC only" -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable hashes/HMAC algorithms only: -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+endchoice - - config CRYPTO_DEV_QCE_SW_MAX_LEN - int "Default maximum request size to use software for AES" ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -2,6 +2,7 @@ - obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o - qcrypto-objs := core.o \ - common.o \ -- dma.o \ -- sha.o \ -- skcipher.o -+ dma.o -+ -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -51,52 +51,56 @@ qce_clear_array(struct qce_device *qce, - qce_write(qce, offset + i * sizeof(u32), 0); - } - --static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+static u32 qce_config_reg(struct qce_device *qce, int little) - { -- u32 cfg = 0; -+ u32 beats = (qce->burst_size >> 3) - 1; -+ u32 pipe_pair = qce->pipe_pair_id; -+ u32 config; - -- if (IS_AES(flags)) { -- if (aes_key_size == AES_KEYSIZE_128) -- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -- else if (aes_key_size == AES_KEYSIZE_256) -- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -- } -+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -+ config &= ~HIGH_SPD_EN_N_SHIFT; - -- if (IS_AES(flags)) -- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -- else if (IS_DES(flags) || IS_3DES(flags)) -- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ if (little) -+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); - -- if (IS_DES(flags)) -- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ return config; -+} - -- if (IS_3DES(flags)) -- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) -+{ -+ __be32 *d = dst; -+ const u8 *s = src; -+ unsigned int n; - -- switch (flags & QCE_MODE_MASK) { -- case QCE_MODE_ECB: -- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CBC: -- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CTR: -- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_XTS: -- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CCM: -- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -- break; -- default: -- return ~0; -+ n = len / sizeof(u32); -+ for (; n > 0; n--) { -+ *d = cpu_to_be32p((const __u32 *) s); -+ s += sizeof(__u32); -+ d++; - } -+} - -- return cfg; -+static void qce_setup_config(struct qce_device *qce) -+{ -+ u32 config; -+ -+ /* get big endianness */ -+ config = qce_config_reg(qce, 0); -+ -+ /* clear status */ -+ qce_write(qce, REG_STATUS, 0); -+ qce_write(qce, REG_CONFIG, config); -+} -+ -+static inline void qce_crypto_go(struct qce_device *qce) -+{ -+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); - } - -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - static u32 qce_auth_cfg(unsigned long flags, u32 key_size) - { - u32 cfg = 0; -@@ -143,88 +147,6 @@ static u32 qce_auth_cfg(unsigned long fl - return cfg; - } - --static u32 qce_config_reg(struct qce_device *qce, int little) --{ -- u32 beats = (qce->burst_size >> 3) - 1; -- u32 pipe_pair = qce->pipe_pair_id; -- u32 config; -- -- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -- config &= ~HIGH_SPD_EN_N_SHIFT; -- -- if (little) -- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); -- -- return config; --} -- --void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) --{ -- __be32 *d = dst; -- const u8 *s = src; -- unsigned int n; -- -- n = len / sizeof(u32); -- for (; n > 0; n--) { -- *d = cpu_to_be32p((const __u32 *) s); -- s += sizeof(__u32); -- d++; -- } --} -- --static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) --{ -- u8 swap[QCE_AES_IV_LENGTH]; -- u32 i, j; -- -- if (ivsize > QCE_AES_IV_LENGTH) -- return; -- -- memset(swap, 0, QCE_AES_IV_LENGTH); -- -- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -- i < QCE_AES_IV_LENGTH; i++, j--) -- swap[i] = src[j]; -- -- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); --} -- --static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -- unsigned int enckeylen, unsigned int cryptlen) --{ -- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -- unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -- unsigned int xtsdusize; -- -- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -- enckeylen / 2); -- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -- -- /* xts du size 512B */ -- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); --} -- --static void qce_setup_config(struct qce_device *qce) --{ -- u32 config; -- -- /* get big endianness */ -- config = qce_config_reg(qce, 0); -- -- /* clear status */ -- qce_write(qce, REG_STATUS, 0); -- qce_write(qce, REG_CONFIG, config); --} -- --static inline void qce_crypto_go(struct qce_device *qce) --{ -- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); --} -- - static int qce_setup_regs_ahash(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -@@ -309,6 +231,87 @@ go_proc: - - return 0; - } -+#endif -+ -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER -+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+{ -+ u32 cfg = 0; -+ -+ if (IS_AES(flags)) { -+ if (aes_key_size == AES_KEYSIZE_128) -+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -+ else if (aes_key_size == AES_KEYSIZE_256) -+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -+ } -+ -+ if (IS_AES(flags)) -+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -+ else if (IS_DES(flags) || IS_3DES(flags)) -+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ -+ if (IS_DES(flags)) -+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ -+ if (IS_3DES(flags)) -+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+ -+ switch (flags & QCE_MODE_MASK) { -+ case QCE_MODE_ECB: -+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CBC: -+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CTR: -+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_XTS: -+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CCM: -+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -+ break; -+ default: -+ return ~0; -+ } -+ -+ return cfg; -+} -+ -+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) -+{ -+ u8 swap[QCE_AES_IV_LENGTH]; -+ u32 i, j; -+ -+ if (ivsize > QCE_AES_IV_LENGTH) -+ return; -+ -+ memset(swap, 0, QCE_AES_IV_LENGTH); -+ -+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -+ i < QCE_AES_IV_LENGTH; i++, j--) -+ swap[i] = src[j]; -+ -+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); -+} -+ -+static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -+ unsigned int enckeylen, unsigned int cryptlen) -+{ -+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -+ unsigned int xtsdusize; -+ -+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -+ enckeylen / 2); -+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -+ -+ /* xts du size 512B */ -+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); -+} - - static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) -@@ -390,15 +393,20 @@ static int qce_setup_regs_skcipher(struc - - return 0; - } -+#endif - - int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen, - u32 offset) - { - switch (type) { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - case CRYPTO_ALG_TYPE_SKCIPHER: - return qce_setup_regs_skcipher(async_req, totallen, offset); -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); -+#endif - default: - return -EINVAL; - } ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -30,8 +30,12 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - &skcipher_ops, -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - &ahash_ops, -+#endif - }; - - static void qce_unregister_algs(struct qce_device *qce) diff --git a/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch b/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch deleted file mode 100644 index d0b520f389..0000000000 --- a/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 61a3bd10082b0e861b4e1bc451a92e20181a52f5 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Mon, 23 Jul 2018 16:17:35 +0200 -Subject: [PATCH] soc: qcom: spm: add SCM probe dependency - -Check for SCM availability before attempting to use SPM. SPM probe will -fail otherwise. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> -Signed-off-by: John Crispin <john@phrozen.org> -Signed-off-by: Andy Gross <andy.gross@linaro.org> ---- - drivers/soc/qcom/spm.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/soc/qcom/spm.c -+++ b/drivers/soc/qcom/spm.c -@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru - cpumask_t mask; - bool use_scm_power_down = false; - -+ if (!qcom_scm_is_available()) -+ return -EPROBE_DEFER; -+ - for (i = 0; ; i++) { - state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); - if (!state_node) diff --git a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch b/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch deleted file mode 100644 index b1d69ca0ee..0000000000 --- a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 233c77d4f1d12e4337fba1146d5197f4c0f9107d Mon Sep 17 00:00:00 2001 -From: Matthew McClintock <mmcclint@codeaurora.org> -Date: Wed, 25 Jul 2018 10:37:45 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism - -v1 was the incorrect choice here and sometimes the board -would not come up properly. - -Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Signed-off-by: John Crispin <john@phrozen.org> -Signed-off-by: Andy Gross <andy.gross@linaro.org> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++-------- - 1 file changed, 17 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -52,7 +52,8 @@ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - reg = <0x0>; -@@ -71,7 +72,8 @@ - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - reg = <0x1>; -@@ -90,7 +92,8 @@ - cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc2>; - qcom,saw = <&saw2>; - reg = <0x2>; -@@ -109,7 +112,8 @@ - cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc3>; - qcom,saw = <&saw3>; - reg = <0x3>; -@@ -124,6 +128,11 @@ - >; - clock-latency = <256000>; - }; -+ -+ L2: l2-cache { -+ compatible = "cache"; -+ cache-level = <2>; -+ }; - }; - - pmu { -@@ -292,22 +301,22 @@ - }; - - acc0: clock-controller@b088000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; - - acc1: clock-controller@b098000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; - - acc2: clock-controller@b0a8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; - - acc3: clock-controller@b0b8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; - diff --git a/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch b/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch deleted file mode 100644 index d37a8cb6ba..0000000000 --- a/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Thu, 29 Nov 2018 22:29:36 +0100 -Subject: [PATCH] ipq40xx: Fix booting secondary cores - -Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch -We dont modify the patch itself as its upstream and this change is not. - -Originally added by Mantas Pucka Mantas Pucka <mantas@8devices.com> - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -132,6 +132,7 @@ - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; -+ qcom,saw = <&saw_l2>; - }; - }; - -@@ -344,6 +345,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - blsp1_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch b/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch deleted file mode 100644 index 991b366eda..0000000000 --- a/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch +++ /dev/null @@ -1,114 +0,0 @@ -From bcb9ab4c2917e92114d2f4c2b1da97cdf15b471b Mon Sep 17 00:00:00 2001 -From: Matthew McClintock <mmcclint@codeaurora.org> -Date: Wed, 25 Jul 2018 10:37:46 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq - support - -This adds some operating points for cpu frequeny scaling - -Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> -Signed-off-by: John Crispin <john@phrozen.org> -Signed-off-by: Andy Gross <andy.gross@linaro.org> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 58 ++++++++++++++--------------- - 1 file changed, 30 insertions(+), 28 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -59,14 +59,8 @@ - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 716000 1100000 -- >; - clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { -@@ -79,14 +73,8 @@ - reg = <0x1>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; - clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { -@@ -99,14 +87,8 @@ - reg = <0x2>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; - clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { -@@ -119,14 +101,8 @@ - reg = <0x3>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; - clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - L2: l2-cache { -@@ -136,6 +112,32 @@ - }; - }; - -+ cpu0_opp_table: opp_table0 { -+ compatible = "operating-points-v2"; -+ opp-shared; -+ -+ opp-48000000 { -+ opp-hz = /bits/ 64 <48000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-200000000 { -+ opp-hz = /bits/ 64 <200000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-500000000 { -+ opp-hz = /bits/ 64 <500000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-716000000 { -+ opp-hz = /bits/ 64 <716000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <256000>; -+ }; -+ }; -+ - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | diff --git a/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch deleted file mode 100644 index 76fcdc6ab1..0000000000 --- a/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sun, 22 Jul 2018 12:07:57 +0200 -Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support - -Add support for the Qualcomm Atheros IPQ4019 SoC. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -150,6 +150,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 - textofs-$(CONFIG_ARCH_MESON) := 0x00208000 - textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - - # Machine directory name. This list is sorted alphanumerically - # by CONFIG_* macro name. ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -27,4 +27,9 @@ config ARCH_MDM9615 - bool "Enable support for MDM9615" - select CLKSRC_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - endif diff --git a/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch deleted file mode 100644 index e7407bcbab..0000000000 --- a/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 24 Jul 2018 15:09:36 +0200 -Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document - -This patch adds the binding documentation for the HS/SS USB PHY found -inside Qualcom Dakota SoCs. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt -@@ -0,0 +1,21 @@ -+Qualcom Dakota HS/SS USB PHY -+ -+Required properties: -+ - compatible: "qcom,usb-ss-ipq4019-phy", -+ "qcom,usb-hs-ipq4019-phy" -+ - reg: offset and length of the registers -+ - #phy-cells: should be 0 -+ - resets: the reset controllers as listed below -+ - reset-names: the names of the reset controllers -+ "por_rst" - the POR reset line for SS and HS phys -+ "srif_rst" - the SRIF reset line for HS phys -+Example: -+ -+hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, -+ <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+}; diff --git a/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch deleted file mode 100644 index e7e7a1f89a..0000000000 --- a/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 24 Jul 2018 14:45:49 +0200 -Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019 - -Add a driver to setup the USB phy on Qualcom Dakota SoCs. -The driver sets up HS and SS phys. In case of HS some magic values need to -be written to magic offsets. These were taken from the SDK driver. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/phy/qualcomm/Kconfig | 7 ++ - drivers/phy/qualcomm/Makefile | 1 + - drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++ - 3 files changed, 196 insertions(+) - create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c - ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -17,6 +17,13 @@ config PHY_QCOM_APQ8064_SATA - depends on OF - select GENERIC_PHY - -+config PHY_QCOM_IPQ4019_USB -+ tristate "Qualcomm IPQ4019 USB PHY module" -+ depends on OF && ARCH_QCOM -+ select GENERIC_PHY -+ help -+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets. -+ - config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -@@ -0,0 +1,188 @@ -+/* -+ * Copyright (C) 2018 John Crispin <john@phrozen.org> -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/mutex.h> -+#include <linux/of_platform.h> -+#include <linux/phy/phy.h> -+#include <linux/platform_device.h> -+#include <linux/reset.h> -+ -+/* -+ * Magic registers copied from the SDK driver code -+ */ -+#define PHY_CTRL0_ADDR 0x000 -+#define PHY_CTRL1_ADDR 0x004 -+#define PHY_CTRL2_ADDR 0x008 -+#define PHY_CTRL3_ADDR 0x00C -+#define PHY_CTRL4_ADDR 0x010 -+#define PHY_MISC_ADDR 0x024 -+#define PHY_IPG_ADDR 0x030 -+ -+#define PHY_CTRL0_VAL 0xA4600015 -+#define PHY_CTRL1_VAL 0x09500000 -+#define PHY_CTRL2_VAL 0x00058180 -+#define PHY_CTRL3_VAL 0x6DB6DCD6 -+#define PHY_CTRL4_VAL 0x836DB6DB -+#define PHY_MISC_VAL 0x3803FB0C -+#define PHY_IPG_VAL 0x47323232 -+ -+struct ipq4019_usb_phy { -+ struct device *dev; -+ struct phy *phy; -+ void __iomem *base; -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+}; -+ -+static int ipq4019_ss_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_ss_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_ss_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_ss_phy_ops = { -+ .power_on = ipq4019_ss_phy_power_on, -+ .power_off = ipq4019_ss_phy_power_off, -+}; -+ -+static int ipq4019_hs_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_hs_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_hs_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); -+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); -+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); -+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); -+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); -+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); -+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); -+ msleep(10); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_hs_phy_ops = { -+ .power_on = ipq4019_hs_phy_power_on, -+ .power_off = ipq4019_hs_phy_power_off, -+}; -+ -+static const struct of_device_id ipq4019_usb_phy_of_match[] = { -+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, -+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); -+ -+static int ipq4019_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ struct ipq4019_usb_phy *phy; -+ const struct of_device_id *match; -+ -+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev); -+ if (!match) -+ return -ENODEV; -+ -+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ phy->dev = &pdev->dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(phy->base)) { -+ dev_err(dev, "failed to remap register memory\n"); -+ return PTR_ERR(phy->base); -+ } -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) { -+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) -+ dev_err(dev, "POR reset is missing\n"); -+ return PTR_ERR(phy->por_rst); -+ } -+ -+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ phy->phy = devm_phy_create(dev, NULL, match->data); -+ if (IS_ERR(phy->phy)) { -+ dev_err(dev, "failed to create PHY\n"); -+ return PTR_ERR(phy->phy); -+ } -+ phy_set_drvdata(phy->phy, phy); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static struct platform_driver ipq4019_usb_phy_driver = { -+ .probe = ipq4019_usb_phy_probe, -+ .driver = { -+ .of_match_table = ipq4019_usb_phy_of_match, -+ .name = "ipq4019-usb-phy", -+ } -+}; -+module_platform_driver(ipq4019_usb_phy_driver); -+ -+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); -+MODULE_AUTHOR("John Crispin <john@phrozen.org>"); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -1,6 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o - obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o - obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o - obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o - obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o diff --git a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index 30a0678fd8..0000000000 --- a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 24 Jul 2018 14:47:55 +0200 -Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes - -This patch makes USB work on the Dakota EVB. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++ - 2 files changed, 94 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -109,5 +109,25 @@ - wifi@a800000 { - status = "ok"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "okay"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "okay"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "okay"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "okay"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -568,5 +568,79 @@ - "legacy"; - status = "disabled"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch deleted file mode 100644 index 3a18ffc08f..0000000000 --- a/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch +++ /dev/null @@ -1,70 +0,0 @@ -From patchwork Mon May 21 20:57:38 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property -X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com> -X-Patchwork-Id: 917856 -Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com> -To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, - linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org -Cc: Bjorn Andersson <bjorn.andersson@linaro.org>, - Linus Walleij <linus.walleij@linaro.org>, - Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>, - Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, - Andy Gross <andy.gross@linaro.org>, - Sven Eckelmann <sven.eckelmann@openmesh.com> -Date: Mon, 21 May 2018 22:57:38 +0200 -From: Christian Lamparter <chunkeey@gmail.com> -List-Id: <linux-gpio.vger.kernel.org> - -This patch adds the gpio-ranges property to almost all of -the Qualcomm ARM platforms that utilize the pinctrl-msm -framework. - -The gpio-ranges property is part of the gpiolib subsystem. -As a result, the binding text is available in section -"2.1 gpio- and pin-controller interaction" of -Documentation/devicetree/bindings/gpio/gpio.txt - -For more information please see the patch titled: -"pinctrl: msm: fix gpio-hog related boot issues" from -this series. - -Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com> -Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] -Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Reviewed-by: Linus Walleij <linus.walleij@linaro.org> ---- -To help with git bisect, the DT update patch has been intentionally -placed after the "pinctrl: msm: fix gpio-hog related boot issues". -Otherwise - if the order was reveresed - and bisect decides to split -between these two patches, the gpiochip_add_pin_ranges() function -will be executed twice with the same parameters for the same pinctrl. ---- - arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++- - arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + - 13 files changed, 14 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -206,6 +206,7 @@ - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 100>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index de99792541..0000000000 --- a/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@googlemail.com> -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1251,6 +1251,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1263,7 +1286,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1286,7 +1309,7 @@ static int clk_cpu_div_set_rate(struct c - u32 mask; - int ret; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1313,6 +1336,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1333,7 +1357,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-4.19/086-ipq40xx-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-4.19/086-ipq40xx-fix-high-resolution-timer.patch deleted file mode 100644 index b45182271a..0000000000 --- a/target/linux/ipq40xx/patches-4.19/086-ipq40xx-fix-high-resolution-timer.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu <absahu@codeaurora.org> -Date: Tue, 7 May 2019 10:14:05 +0300 -Subject: [PATCH] ipq40xx: fix high resolution timer - -Cherry-picked from CAF QSDK repo. -Original commit message: -The kernel is failing in switching the timer for high resolution -mode and clock source operates in 10ms resolution. The always-on -property needs to be given for timer device tree node to make -clock source working in 1ns resolution. - -Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459 -Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> -Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -171,6 +171,7 @@ - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; -+ always-on; - }; - - soc { diff --git a/target/linux/ipq40xx/patches-4.19/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-4.19/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch deleted file mode 100644 index 6b46cda941..0000000000 --- a/target/linux/ipq40xx/patches-4.19/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Wed, 22 Jan 2020 12:44:14 +0100 -Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 - 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Sun, 12 Jan - 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO - driver - -This introduces the IPQ4019 VQMMC LDO driver needed for -the SD/EMMC driver I/O level operation. -This will enable introducing SD/EMMC support for the built-in controller. - -Signed-off-by: Mantas Pucka <mantas@8devices.com> -Signed-off-by: Robert Marko <robert.marko@sartura.hr> -Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr -Signed-off-by: Mark Brown <broonie@kernel.org> ---- - drivers/regulator/Kconfig | 7 ++ - drivers/regulator/Makefile | 1 + - drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++ - 3 files changed, 109 insertions(+) - create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c - ---- a/drivers/regulator/Kconfig -+++ b/drivers/regulator/Kconfig -@@ -981,6 +981,13 @@ config REGULATOR_VEXPRESS - This driver provides support for voltage regulators available - on the ARM Ltd's Versatile Express platform. - -+config REGULATOR_VQMMC_IPQ4019 -+ tristate "IPQ4019 VQMMC SD LDO regulator support" -+ depends on ARCH_QCOM -+ help -+ This driver provides support for the VQMMC LDO I/0 -+ voltage regulator of the IPQ4019 SD/EMMC controller. -+ - config REGULATOR_WM831X - tristate "Wolfson Microelectronics WM831x PMIC regulators" - depends on MFD_WM831X ---- a/drivers/regulator/Makefile -+++ b/drivers/regulator/Makefile -@@ -122,6 +122,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r - obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o - obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o - obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o -+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o ---- /dev/null -+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c -@@ -0,0 +1,101 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+// -+// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com> -+// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr> -+// -+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator -+ -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <linux/regmap.h> -+#include <linux/regulator/driver.h> -+#include <linux/regulator/machine.h> -+#include <linux/regulator/of_regulator.h> -+ -+static const unsigned int ipq4019_vmmc_voltages[] = { -+ 1500000, 1800000, 2500000, 3000000, -+}; -+ -+static const struct regulator_ops ipq4019_regulator_voltage_ops = { -+ .list_voltage = regulator_list_voltage_table, -+ .map_voltage = regulator_map_voltage_ascend, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+}; -+ -+static const struct regulator_desc vmmc_regulator = { -+ .name = "vmmcq", -+ .ops = &ipq4019_regulator_voltage_ops, -+ .type = REGULATOR_VOLTAGE, -+ .owner = THIS_MODULE, -+ .volt_table = ipq4019_vmmc_voltages, -+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), -+ .vsel_reg = 0, -+ .vsel_mask = 0x3, -+}; -+ -+static const struct regmap_config ipq4019_vmmcq_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+}; -+ -+static int ipq4019_regulator_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct regulator_init_data *init_data; -+ struct regulator_config cfg = {}; -+ struct regulator_dev *rdev; -+ struct resource *res; -+ struct regmap *rmap; -+ void __iomem *base; -+ -+ init_data = of_get_regulator_init_data(dev, dev->of_node, -+ &vmmc_regulator); -+ if (!init_data) -+ return -EINVAL; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); -+ if (IS_ERR(rmap)) -+ return PTR_ERR(rmap); -+ -+ cfg.dev = dev; -+ cfg.init_data = init_data; -+ cfg.of_node = dev->of_node; -+ cfg.regmap = rmap; -+ -+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); -+ if (IS_ERR(rdev)) { -+ dev_err(dev, "Failed to register regulator: %ld\n", -+ PTR_ERR(rdev)); -+ return PTR_ERR(rdev); -+ } -+ platform_set_drvdata(pdev, rdev); -+ -+ return 0; -+} -+ -+static const struct of_device_id regulator_ipq4019_of_match[] = { -+ { .compatible = "qcom,vqmmc-ipq4019-regulator", }, -+ {}, -+}; -+ -+static struct platform_driver ipq4019_regulator_driver = { -+ .probe = ipq4019_regulator_probe, -+ .driver = { -+ .name = "vqmmc-ipq4019-regulator", -+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match), -+ }, -+}; -+module_platform_driver(ipq4019_regulator_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>"); -+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); diff --git a/target/linux/ipq40xx/patches-4.19/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-4.19/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch deleted file mode 100644 index 90e6b25538..0000000000 --- a/target/linux/ipq40xx/patches-4.19/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Thu, 15 Aug 2019 19:28:23 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node - -IPQ4019 has a built in SD/eMMC controller which is supported by the -SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. -So lets add the appropriate node for it. - -Signed-off-by: Robert Marko <robimarko@gmail.com> -Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -214,6 +214,18 @@ - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - -+ sdhci: sdhci@7824900 { -+ compatible = "qcom,sdhci-msm-v4"; -+ reg = <0x7824900 0x11c>, <0x7824000 0x800>; -+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "hc_irq", "pwr_irq"; -+ bus-width = <8>; -+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, -+ <&gcc GCC_DCD_XO_CLK>; -+ clock-names = "core", "iface", "xo"; -+ status = "disabled"; -+ }; -+ - blsp_dma: dma@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; diff --git a/target/linux/ipq40xx/patches-4.19/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-4.19/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch deleted file mode 100644 index 1f346371de..0000000000 --- a/target/linux/ipq40xx/patches-4.19/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Wed, 22 Jan 2020 12:56:35 +0100 -Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node - -Since we now have driver for the SDHCI VQMMC LDO needed -for I/0 voltage levels lets introduce the necessary node for it. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -214,6 +214,16 @@ - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - -+ vqmmc: regulator@1948000 { -+ compatible = "qcom,vqmmc-ipq4019-regulator"; -+ reg = <0x01948000 0x4>; -+ regulator-name = "vqmmc"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-always-on; -+ status = "disabled"; -+ }; -+ - sdhci: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch b/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch deleted file mode 100644 index 4cabfc8f59..0000000000 --- a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1099,6 +1099,7 @@ static const struct flash_info spi_nor_i - { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, - { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, -@@ -1286,11 +1287,12 @@ static const struct flash_info spi_nor_i - { }, - }; - --static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) -+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor, -+ const char *name) - { - int tmp; - u8 id[SPI_NOR_MAX_ID_LEN]; -- const struct flash_info *info; -+ const struct flash_info *info, *first_match = NULL; - - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); - if (tmp < 0) { -@@ -1301,10 +1303,16 @@ static const struct flash_info *spi_nor_ - for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = &spi_nor_ids[tmp]; - if (info->id_len) { -- if (!memcmp(info->id, id, info->id_len)) -- return &spi_nor_ids[tmp]; -+ if (!memcmp(info->id, id, info->id_len)) { -+ if (!name || !strcmp(name, info->name)) -+ return info; -+ if (!first_match) -+ first_match = info; -+ } - } - } -+ if (first_match) -+ return first_match; - dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", - id[0], id[1], id[2]); - return ERR_PTR(-ENODEV); -@@ -2838,7 +2846,7 @@ int spi_nor_scan(struct spi_nor *nor, co - info = spi_nor_match_id(name); - /* Try to auto-detect if chip name wasn't specified or not found */ - if (!info) -- info = spi_nor_read_id(nor); -+ info = spi_nor_read_id(nor, NULL); - if (IS_ERR_OR_NULL(info)) - return -ENOENT; - -@@ -2849,7 +2857,7 @@ int spi_nor_scan(struct spi_nor *nor, co - if (name && info->id_len) { - const struct flash_info *jinfo; - -- jinfo = spi_nor_read_id(nor); -+ jinfo = spi_nor_read_id(nor, name); - if (IS_ERR(jinfo)) { - return PTR_ERR(jinfo); - } else if (jinfo != info) { diff --git a/target/linux/ipq40xx/patches-4.19/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-4.19/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch deleted file mode 100644 index ad66f409b1..0000000000 --- a/target/linux/ipq40xx/patches-4.19/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 158acdbf0336f601971637f988b57a6a67a0869b Mon Sep 17 00:00:00 2001 -From: David Bauer <mail@david-bauer.net> -Date: Sun, 15 Dec 2019 13:10:50 +0100 -Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f - -Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix. -The chip has 4MB of total capacity, divided into a total of 64 sectors, -each 64KB sized. The chip also supports 4KB large sectors. -Additionally, it supports dual and quad read modes. - -Signed-off-by: David Bauer <mail@david-bauer.net> ---- - drivers/mtd/spi-nor/spi-nor.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1096,6 +1096,8 @@ static const struct flash_info spi_nor_i - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, -+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, diff --git a/target/linux/ipq40xx/patches-4.19/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-4.19/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch deleted file mode 100644 index 3ec6f4a0e8..0000000000 --- a/target/linux/ipq40xx/patches-4.19/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 0e28623a11f3916c1fe5b7e789c7ab8ca932a929 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Wed, 22 Jan 2020 13:02:13 +0100 -Subject: [PATCH] mmc: sdhci: sdhci-msm: use sdhci_set_clock instead of - sdhci_msm_set_clock - -When using sdhci_msm_set_clock clock setting will fail, so lets -use the generic sdhci_set_clock. - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - drivers/mmc/host/sdhci-msm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -1694,7 +1694,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat - - static const struct sdhci_ops sdhci_msm_ops = { - .reset = sdhci_reset, -- .set_clock = sdhci_msm_set_clock, -+ .set_clock = sdhci_set_clock, - .get_min_clock = sdhci_msm_get_min_clock, - .get_max_clock = sdhci_msm_get_max_clock, - .set_bus_width = sdhci_set_bus_width, diff --git a/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio.patch b/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio.patch deleted file mode 100644 index 847e2e8701..0000000000 --- a/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio.patch +++ /dev/null @@ -1,225 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -524,6 +524,13 @@ config XILINX_GMII2RGMII - the Reduced Gigabit Media Independent Interface(RGMII) between - Ethernet physical media devices and the Gigabit Ethernet controller. - -+config MDIO_IPQ40XX -+ tristate "Qualcomm Atheros ipq40xx MDIO interface" -+ depends on HAS_IOMEM && OF -+ ---help--- -+ This driver supports the MDIO interface found in Qualcomm -+ Atheros ipq40xx Soc chip. -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o - obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o - obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o -+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o - obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o - obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o ---- /dev/null -+++ b/drivers/net/phy/mdio-ipq40xx.c -@@ -0,0 +1,196 @@ -+/* -+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/delay.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/mutex.h> -+#include <linux/io.h> -+#include <linux/of_address.h> -+#include <linux/of_mdio.h> -+#include <linux/phy.h> -+#include <linux/platform_device.h> -+ -+#define MDIO_CTRL_0_REG 0x40 -+#define MDIO_CTRL_1_REG 0x44 -+#define MDIO_CTRL_2_REG 0x48 -+#define MDIO_CTRL_3_REG 0x4c -+#define MDIO_CTRL_4_REG 0x50 -+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16) -+#define MDIO_CTRL_4_ACCESS_START BIT(8) -+#define MDIO_CTRL_4_ACCESS_CODE_READ 0 -+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1 -+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF -+ -+#define IPQ40XX_MDIO_RETRY 1000 -+#define IPQ40XX_MDIO_DELAY 10 -+ -+struct ipq40xx_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ struct device *dev; -+}; -+ -+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am) -+{ -+ int i; -+ -+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) { -+ unsigned int busy; -+ -+ busy = readl(am->membase + MDIO_CTRL_4_REG) & -+ MDIO_CTRL_4_ACCESS_BUSY; -+ if (!busy) -+ return 0; -+ -+ /* BUSY might take to be cleard by 15~20 times of loop */ -+ udelay(IPQ40XX_MDIO_DELAY); -+ } -+ -+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name); -+ -+ return -ETIMEDOUT; -+} -+ -+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ int value = 0; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ; -+ -+ /* issue read command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait read complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* Read data */ -+ value = readl(am->membase + MDIO_CTRL_3_REG); -+ -+ return value; -+} -+ -+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ /* issue write data */ -+ writel(value, am->membase + MDIO_CTRL_2_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE; -+ /* issue write command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait write complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ return 0; -+} -+ -+static int ipq40xx_mdio_probe(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am; -+ struct resource *res; -+ int i; -+ -+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL); -+ if (!am) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no iomem resource found\n"); -+ return -ENXIO; -+ } -+ -+ am->membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(am->membase)) { -+ dev_err(&pdev->dev, "unable to ioremap registers\n"); -+ return PTR_ERR(am->membase); -+ } -+ -+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev); -+ if (!am->mii_bus) -+ return -ENOMEM; -+ -+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG); -+ -+ am->mii_bus->name = "ipq40xx_mdio"; -+ am->mii_bus->read = ipq40xx_mdio_read; -+ am->mii_bus->write = ipq40xx_mdio_write; -+ am->mii_bus->priv = am; -+ am->mii_bus->parent = &pdev->dev; -+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); -+ -+ am->dev = &pdev->dev; -+ platform_set_drvdata(pdev, am); -+ -+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node); -+} -+ -+static int ipq40xx_mdio_remove(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev); -+ -+ mdiobus_unregister(am->mii_bus); -+ -+ return 0; -+} -+ -+static const struct of_device_id ipq40xx_mdio_dt_ids[] = { -+ { .compatible = "qcom,ipq4019-mdio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids); -+ -+static struct platform_driver ipq40xx_mdio_driver = { -+ .probe = ipq40xx_mdio_probe, -+ .remove = ipq40xx_mdio_remove, -+ .driver = { -+ .name = "ipq40xx-mdio", -+ .of_match_table = ipq40xx_mdio_dt_ids, -+ }, -+}; -+ -+module_platform_driver(ipq40xx_mdio_driver); -+ -+#define DRV_VERSION "1.0" -+ -+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver"); -+MODULE_AUTHOR("Qualcomm Atheros"); -+MODULE_VERSION(DRV_VERSION); -+MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch deleted file mode 100644 index 7117a4bdfe..0000000000 --- a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sun, 20 Nov 2016 01:10:33 +0100 -Subject: [PATCH] dts: ipq4019: add mdio node for ethernet - -This patch adds the mdio device-tree node. -This is where the switch is connected to, so it's needed -for the ethernet interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -593,6 +593,34 @@ - status = "disabled"; - }; - -+ mdio: mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x90000 0x64>; -+ status = "disabled"; -+ -+ ethphy0: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethphy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethphy2: ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethphy3: ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethphy4: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch deleted file mode 100644 index 4ef8044893..0000000000 --- a/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sun, 20 Nov 2016 02:20:54 +0100 -Subject: [PATCH] dts: ipq4019: add PHY/switch nodes - -This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii" -nodes which are needed for the ar40xx.c driver to initialize the -switch. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -621,6 +621,29 @@ - }; - }; - -+ ess-switch@c000000 { -+ compatible = "qcom,ess-switch"; -+ reg = <0xc000000 0x80000>; -+ switch_access_mode = "local bus"; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess_rst"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess_clk"; -+ switch_cpu_bmp = <0x1>; -+ switch_lan_bmp = <0x1e>; -+ switch_wan_bmp = <0x20>; -+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */ -+ switch_initvlas = <0x7c 0x54>; -+ status = "disabled"; -+ }; -+ -+ ess-psgmii@98000 { -+ compatible = "qcom,ess-psgmii"; -+ reg = <0x98000 0x800>; -+ psgmii_access_mode = "local bus"; -+ status = "disabled"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch deleted file mode 100644 index cc7e49736d..0000000000 --- a/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair <ranair@codeaurora.org> -Date: Wed, 20 Jul 2016 15:02:01 +0530 -Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in - netdev_ops - -Add callback support to get default vlan tag and register -receive flow steering filter. - -Used by IPQ4019 ess-edma driver. - -BUG=chrome-os-partner:33096 -TEST=none - -Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75 -Signed-off-by: Rakesh Nair <ranair@codeaurora.org> -Reviewed-on: https://chromium-review.googlesource.com/362203 -Commit-Ready: Grant Grundler <grundler@chromium.org> -Tested-by: Grant Grundler <grundler@chromium.org> -Reviewed-by: Grant Grundler <grundler@chromium.org> ---- - include/linux/netdevice.h | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -739,6 +739,16 @@ struct xps_map { - #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \ - - sizeof(struct xps_map)) / sizeof(u16)) - -+#ifdef CONFIG_RFS_ACCEL -+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev, -+ __be32 src, -+ __be32 dst, -+ __be16 sport, -+ __be16 dport, -+ u8 proto, -+ u16 rxq_index, -+ u32 action); -+#endif - /* - * This structure holds all XPS maps for device. Maps are indexed by CPU. - */ -@@ -1353,6 +1363,9 @@ struct net_device_ops { - const struct sk_buff *skb, - u16 rxq_index, - u32 flow_id); -+ int (*ndo_register_rfs_filter)(struct net_device *dev, -+ set_rfs_filter_callback_t set_filter); -+ int (*ndo_get_default_vlan_tag)(struct net_device *net); - #endif - int (*ndo_add_slave)(struct net_device *dev, - struct net_device *slave_dev, diff --git a/target/linux/ipq40xx/patches-4.19/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-4.19/705-net-add-qualcomm-ar40xx-phy.patch deleted file mode 100644 index 4247ef10c6..0000000000 --- a/target/linux/ipq40xx/patches-4.19/705-net-add-qualcomm-ar40xx-phy.patch +++ /dev/null @@ -1,2459 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -531,6 +531,13 @@ config MDIO_IPQ40XX - This driver supports the MDIO interface found in Qualcomm - Atheros ipq40xx Soc chip. - -+config AR40XX_PHY -+ tristate "Driver for Qualcomm Atheros IPQ40XX switches" -+ depends on HAS_IOMEM && OF -+ select SWCONFIG -+ ---help--- -+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches. -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -62,6 +62,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) - - obj-$(CONFIG_AMD_PHY) += amd.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o -+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o - obj-$(CONFIG_AX88796B_PHY) += ax88796b.o - obj-$(CONFIG_AT803X_PHY) += at803x.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o ---- /dev/null -+++ b/drivers/net/phy/ar40xx.c -@@ -0,0 +1,2090 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/module.h> -+#include <linux/list.h> -+#include <linux/bitops.h> -+#include <linux/switch.h> -+#include <linux/delay.h> -+#include <linux/phy.h> -+#include <linux/clk.h> -+#include <linux/reset.h> -+#include <linux/lockdep.h> -+#include <linux/workqueue.h> -+#include <linux/of_device.h> -+#include <linux/of_address.h> -+#include <linux/mdio.h> -+#include <linux/gpio.h> -+ -+#include "ar40xx.h" -+ -+static struct ar40xx_priv *ar40xx_priv; -+ -+#define MIB_DESC(_s , _o, _n) \ -+ { \ -+ .size = (_s), \ -+ .offset = (_o), \ -+ .name = (_n), \ -+ } -+ -+static const struct ar40xx_mib_desc ar40xx_mibs[] = { -+ MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"), -+ MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"), -+ MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"), -+ MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"), -+ MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"), -+ MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"), -+ MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"), -+ MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"), -+ MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"), -+ MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"), -+ MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"), -+ MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"), -+ MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"), -+ MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"), -+ MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"), -+ MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"), -+ MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"), -+ MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"), -+ MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"), -+ MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"), -+}; -+ -+static u32 -+ar40xx_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ u32 ret; -+ -+ ret = ar40xx_read(priv, reg); -+ ret &= ~mask; -+ ret |= val; -+ ar40xx_write(priv, reg, ret); -+ return ret; -+} -+ -+static void -+ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 *dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id, u16 reg_val) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_val); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static u16 -+ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id) -+{ -+ u16 value; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA); -+ mutex_unlock(&bus->mdio_lock); -+ return value; -+} -+ -+/* Start of swconfig support */ -+ -+static void -+ar40xx_phy_poll_reset(struct ar40xx_priv *priv) -+{ -+ u32 i, in_reset, retries = 500; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* Assume RESET was recently issued to some or all of the phys */ -+ in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0); -+ -+ while (retries--) { -+ /* 1ms should be plenty of time. -+ * 802.3 spec allows for a max wait time of 500ms -+ */ -+ usleep_range(1000, 2000); -+ -+ for (i = 0; i < AR40XX_NUM_PHYS; i++) { -+ int val; -+ -+ /* skip devices which have completed reset */ -+ if (!(in_reset & BIT(i))) -+ continue; -+ -+ val = mdiobus_read(bus, i, MII_BMCR); -+ if (val < 0) -+ continue; -+ -+ /* mark when phy is no longer in reset state */ -+ if (!(val & BMCR_RESET)) -+ in_reset &= ~BIT(i); -+ } -+ -+ if (!in_reset) -+ return; -+ } -+ -+ dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n", -+ in_reset); -+} -+ -+static void -+ar40xx_phy_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val &= ~AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ mdiobus_write(bus, i, -+ MII_ADVERTISE, ADVERTISE_ALL | -+ ADVERTISE_PAUSE_CAP | -+ ADVERTISE_PAUSE_ASYM); -+ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ } -+ -+ ar40xx_phy_poll_reset(priv); -+} -+ -+static void -+ar40xx_port_phy_linkdown(struct ar40xx_priv *priv) -+{ -+ struct mii_bus *bus; -+ int i; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ mdiobus_write(bus, i, MII_CTRL1000, 0); -+ mdiobus_write(bus, i, MII_ADVERTISE, 0); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val |= AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ /* disable transmit */ -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val); -+ val &= 0xf00f; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val); -+ } -+} -+ -+static void -+ar40xx_set_mirror_regs(struct ar40xx_priv *priv) -+{ -+ int port; -+ -+ /* reset all mirror registers */ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ for (port = 0; port < AR40XX_NUM_PORTS; port++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port), -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0); -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port), -+ AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0); -+ } -+ -+ /* now enable mirroring if necessary */ -+ if (priv->source_port >= AR40XX_NUM_PORTS || -+ priv->monitor_port >= AR40XX_NUM_PORTS || -+ priv->source_port == priv->monitor_port) { -+ return; -+ } -+ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ -+ if (priv->mirror_rx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0, -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN); -+ -+ if (priv->mirror_tx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port), -+ 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN); -+} -+ -+static int -+ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 ports = priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ val->len = 0; -+ for (i = 0; i < dev->ports; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & BIT(i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if ((priv->vlan_tagged & BIT(i)) || -+ (priv->pvid[i] != val->port_vlan)) -+ p->flags = BIT(SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 *vt = &priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ *vt = 0; -+ for (i = 0; i < val->len; i++) { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) { -+ if (val->port_vlan == priv->pvid[p->id]) -+ priv->vlan_tagged |= BIT(p->id); -+ } else { -+ priv->vlan_tagged &= ~BIT(p->id); -+ priv->pvid[p->id] = val->port_vlan; -+ } -+ -+ *vt |= BIT(p->id); -+ } -+ return 0; -+} -+ -+static int -+ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val, -+ unsigned timeout) -+{ -+ int i; -+ -+ for (i = 0; i < timeout; i++) { -+ u32 t; -+ -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ usleep_range(1000, 2000); -+ } -+ -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_mib_op(struct ar40xx_priv *priv, u32 op) -+{ -+ int ret; -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ /* Capture the hardware statistics for all ports */ -+ ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S)); -+ -+ /* Wait for the capturing to complete. */ -+ ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_BUSY, 0, 10); -+ -+ return ret; -+} -+ -+static void -+ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush) -+{ -+ unsigned int base; -+ u64 *mib_stats; -+ int i; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ WARN_ON(port >= priv->dev.ports); -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ base = AR40XX_REG_PORT_STATS_START + -+ AR40XX_REG_PORT_STATS_LEN * port; -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ if (flush) { -+ u32 len; -+ -+ len = num_mibs * sizeof(*mib_stats); -+ memset(mib_stats, 0, len); -+ return; -+ } -+ for (i = 0; i < num_mibs; i++) { -+ const struct ar40xx_mib_desc *mib; -+ u64 t; -+ -+ mib = &ar40xx_mibs[i]; -+ t = ar40xx_read(priv, base + mib->offset); -+ if (mib->size == 2) { -+ u64 hi; -+ -+ hi = ar40xx_read(priv, base + mib->offset + 4); -+ t |= hi << 32; -+ } -+ -+ mib_stats[i] += t; -+ } -+} -+ -+static int -+ar40xx_mib_capture(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE); -+} -+ -+static int -+ar40xx_mib_flush(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH); -+} -+ -+static int -+ar40xx_sw_set_reset_mibs(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ unsigned int len; -+ int ret; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats); -+ memset(priv->mib_stats, 0, len); -+ ret = ar40xx_mib_flush(priv); -+ -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan = !!val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_rx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_rx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_tx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_tx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->monitor_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->monitor_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->source_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->source_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_linkdown(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ if (val->value.i == 1) -+ ar40xx_port_phy_linkdown(priv); -+ else -+ ar40xx_phy_init(priv); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_port_reset_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int port; -+ int ret; -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, true); -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_get_port_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u64 *mib_stats; -+ int port; -+ int ret; -+ char *buf = priv->buf; -+ int i, len = 0; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, false); -+ -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "Port %d MIB counters\n", -+ port); -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ for (i = 0; i < num_mibs; i++) -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "%-12s: %llu\n", -+ ar40xx_mibs[i].name, -+ mib_stats[i]); -+ -+ val->value.s = buf; -+ val->len = len; -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan_id[val->port_vlan] = val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan_id[val->port_vlan]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ *vlan = priv->pvid[port]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ /* make sure no invalid PVIDs get set */ -+ if (vlan >= dev->vlans) -+ return -EINVAL; -+ -+ priv->pvid[port] = vlan; -+ return 0; -+} -+ -+static void -+ar40xx_read_port_link(struct ar40xx_priv *priv, int port, -+ struct switch_port_link *link) -+{ -+ u32 status; -+ u32 speed; -+ -+ memset(link, 0, sizeof(*link)); -+ -+ status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port)); -+ -+ link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN); -+ if (link->aneg || (port != AR40XX_PORT_CPU)) -+ link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP); -+ else -+ link->link = true; -+ -+ if (!link->link) -+ return; -+ -+ link->duplex = !!(status & AR40XX_PORT_DUPLEX); -+ link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW); -+ link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW); -+ -+ speed = (status & AR40XX_PORT_SPEED) >> -+ AR40XX_PORT_STATUS_SPEED_S; -+ -+ switch (speed) { -+ case AR40XX_PORT_SPEED_10M: -+ link->speed = SWITCH_PORT_SPEED_10; -+ break; -+ case AR40XX_PORT_SPEED_100M: -+ link->speed = SWITCH_PORT_SPEED_100; -+ break; -+ case AR40XX_PORT_SPEED_1000M: -+ link->speed = SWITCH_PORT_SPEED_1000; -+ break; -+ default: -+ link->speed = SWITCH_PORT_SPEED_UNKNOWN; -+ break; -+ } -+} -+ -+static int -+ar40xx_sw_get_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ ar40xx_read_port_link(priv, port, link); -+ return 0; -+} -+ -+static const struct switch_attr ar40xx_sw_attr_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .set = ar40xx_sw_set_vlan, -+ .get = ar40xx_sw_get_vlan, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mibs", -+ .description = "Reset all MIB counters", -+ .set = ar40xx_sw_set_reset_mibs, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_rx", -+ .description = "Enable mirroring of RX packets", -+ .set = ar40xx_sw_set_mirror_rx_enable, -+ .get = ar40xx_sw_get_mirror_rx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_tx", -+ .description = "Enable mirroring of TX packets", -+ .set = ar40xx_sw_set_mirror_tx_enable, -+ .get = ar40xx_sw_get_mirror_tx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_monitor_port", -+ .description = "Mirror monitor port", -+ .set = ar40xx_sw_set_mirror_monitor_port, -+ .get = ar40xx_sw_get_mirror_monitor_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_source_port", -+ .description = "Mirror source port", -+ .set = ar40xx_sw_set_mirror_source_port, -+ .get = ar40xx_sw_get_mirror_source_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "linkdown", -+ .description = "Link down all the PHYs", -+ .set = ar40xx_sw_set_linkdown, -+ .max = 1 -+ }, -+}; -+ -+static const struct switch_attr ar40xx_sw_attr_port[] = { -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mib", -+ .description = "Reset single port MIB counters", -+ .set = ar40xx_sw_set_port_reset_mib, -+ }, -+ { -+ .type = SWITCH_TYPE_STRING, -+ .name = "mib", -+ .description = "Get port's MIB counters", -+ .set = NULL, -+ .get = ar40xx_sw_get_port_mib, -+ }, -+}; -+ -+const struct switch_attr ar40xx_sw_attr_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = ar40xx_sw_set_vid, -+ .get = ar40xx_sw_get_vid, -+ .max = 4094, -+ }, -+}; -+ -+/* End of swconfig support */ -+ -+static int -+ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ int timeout = 20; -+ u32 t; -+ -+ while (1) { -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ if (timeout-- <= 0) -+ break; -+ -+ usleep_range(10, 20); -+ } -+ -+ pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n", -+ (unsigned int)reg, t, mask, val); -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_atu_flush(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_BUSY, 0); -+ if (!ret) -+ ar40xx_write(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_OP_FLUSH | -+ AR40XX_ATU_FUNC_BUSY); -+ -+ return ret; -+} -+ -+static void -+ar40xx_ess_reset(struct ar40xx_priv *priv) -+{ -+ reset_control_assert(priv->ess_rst); -+ mdelay(10); -+ reset_control_deassert(priv->ess_rst); -+ /* Waiting for all inner tables init done. -+ * It cost 5~10ms. -+ */ -+ mdelay(10); -+ -+ pr_info("ESS reset ok!\n"); -+} -+ -+/* Start of psgmii self test */ -+ -+static void -+ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv) -+{ -+ u32 n; -+ struct mii_bus *bus = priv->mii_bus; -+ /* reset phy psgmii */ -+ /* fix phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ /* reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x001b); -+ /* release reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u16 status; -+ -+ status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in malibu is ready -+ * the worst time is 8.67ms -+ * for 25MHz reference clock -+ * [512+(128+2048)*49]*80ns+100us -+ */ -+ mdelay(2); -+ } -+ -+ /*check malibu psgmii calibration done end..*/ -+ -+ /*freeze phy psgmii RX CDR*/ -+ mdiobus_write(bus, 5, 0x1a, 0x2230); -+ -+ ar40xx_ess_reset(priv); -+ -+ /*check psgmii calibration done start*/ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u32 status; -+ -+ status = ar40xx_psgmii_read(priv, 0xa0); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in ESS is ready */ -+ mdelay(2); -+ } -+ -+ /* check dakota psgmii calibration done end..*/ -+ -+ /* relesae phy psgmii RX CDR */ -+ mdiobus_write(bus, 5, 0x1a, 0x3230); -+ /* release phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005f); -+} -+ -+static void -+ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy) -+{ -+ int j; -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, phy, 0x0, 0x9000); -+ mdiobus_write(bus, phy, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (status & AR40XX_PHY_SPEC_STATUS_LINK) -+ break; -+ /* the polling interval to check if the PHY link up or not -+ * maxwait_timer: 750 ms +/-10 ms -+ * minwait_timer : 1 us +/- 0.1us -+ * time resides in minwait_timer ~ maxwait_timer -+ * see IEEE 802.3 section 40.4.5.2 -+ */ -+ mdelay(8); -+ } -+ -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16 << 16); -+ rx_all_ok = rx_ok + (rx_ok_high16 << 16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= (~BIT(phy)); -+ } else { -+ pr_info("PHY %d single test PSGMII issue happen!\n", phy); -+ priv->phy_t_status |= BIT(phy); -+ } -+ -+ mdiobus_write(bus, phy, 0x0, 0x1840); -+} -+ -+static void -+ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv) -+{ -+ int phy, j; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, 0x1f, 0x0, 0x9000); -+ mdiobus_write(bus, 0x1f, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (!(status & BIT(10))) -+ break; -+ } -+ -+ if (phy >= (AR40XX_NUM_PORTS - 1)) -+ break; -+ /* The polling interva to check if the PHY link up or not */ -+ mdelay(8); -+ } -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16<<16); -+ rx_all_ok = rx_ok + (rx_ok_high16<<16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= ~BIT(phy + 8); -+ } else { -+ pr_info("PHY%d test see issue!\n", phy); -+ priv->phy_t_status |= BIT(phy + 8); -+ } -+ } -+ -+ pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status); -+} -+ -+void -+ar40xx_psgmii_self_test(struct ar40xx_priv *priv) -+{ -+ u32 i, phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ -+ /* switch to access MII reg for copper */ -+ mdiobus_write(bus, 4, 0x1f, 0x8500); -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /*enable phy mdio broadcast write*/ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f); -+ } -+ /* force no link by power down */ -+ mdiobus_write(bus, 0x1f, 0x0, 0x1840); -+ /*packet number*/ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0); -+ -+ /*fix mdi status */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6800); -+ for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) { -+ priv->phy_t_status = 0; -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, -+ AR40XX_PORT_LOOKUP_LOOPBACK); -+ } -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) -+ ar40xx_psgmii_single_phy_testing(priv, phy); -+ -+ ar40xx_psgmii_all_phy_testing(priv); -+ -+ if (priv->phy_t_status) -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ else -+ break; -+ } -+ -+ if (i >= AR40XX_PSGMII_CALB_NUM) -+ pr_info("PSGMII cannot recover\n"); -+ else -+ pr_debug("PSGMII recovered after %d times reset\n", i); -+ -+ /* configuration recover */ -+ /* packet number */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0); -+ /* disable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0); -+ /* disable traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0); -+} -+ -+void -+ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv) -+{ -+ int phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* disable phy internal loopback */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6860); -+ mdiobus_write(bus, 0x1f, 0x0, 0x9040); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /* disable mac loop back */ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, 0); -+ /* disable phy mdio broadcast write */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f); -+ } -+ -+ /* clear fdb entry */ -+ ar40xx_atu_flush(priv); -+} -+ -+/* End of psgmii self test */ -+ -+static void -+ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode) -+{ -+ if (mode == PORT_WRAPPER_PSGMII) { -+ ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200); -+ ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380); -+ } -+} -+ -+static -+int ar40xx_cpuport_setup(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ t = AR40XX_PORT_STATUS_TXFLOW | -+ AR40XX_PORT_STATUS_RXFLOW | -+ AR40XX_PORT_TXHALF_FLOW | -+ AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED_1000M; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ usleep_range(10, 20); -+ -+ t |= AR40XX_PORT_TX_EN | -+ AR40XX_PORT_RX_EN; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ -+ return 0; -+} -+ -+static void -+ar40xx_init_port(struct ar40xx_priv *priv, int port) -+{ -+ u32 t; -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port), -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0); -+ -+ t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = AR40XX_PORT_LOOKUP_LEARN; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+void -+ar40xx_init_globals(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ /* enable CPU port and disable mirror port */ -+ t = AR40XX_FWD_CTRL0_CPU_PORT_EN | -+ AR40XX_FWD_CTRL0_MIRROR_PORT; -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t); -+ -+ /* forward multicast and broadcast frames to CPU */ -+ t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S); -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t); -+ -+ /* enable jumbo frames */ -+ ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE, -+ AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2); -+ -+ /* Enable MIB counters */ -+ ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0, -+ AR40XX_MODULE_EN_MIB); -+ -+ /* Disable AZ */ -+ ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0); -+ -+ /* set flowctrl thershold for cpu port */ -+ t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) | -+ AR40XX_PORT0_FC_THRESH_OFF_DFLT; -+ ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t); -+} -+ -+static void -+ar40xx_malibu_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ -+ /* war to enable AZ transmitting ability */ -+ ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1, -+ AR40XX_MALIBU_PSGMII_MODE_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL); -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ /* change malibu control_dac */ -+ val = ar40xx_phy_mmd_read(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL); -+ val &= ~AR40XX_MALIBU_DAC_CTRL_MASK; -+ val |= AR40XX_MALIBU_DAC_CTRL_VALUE; -+ ar40xx_phy_mmd_write(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val); -+ if (i == AR40XX_MALIBU_PHY_LAST_ADDR) { -+ /* to avoid goes into hibernation */ -+ val = ar40xx_phy_mmd_read(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL); -+ val &= (~(1<<1)); -+ ar40xx_phy_mmd_write(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL, val); -+ } -+ } -+ -+ /* adjust psgmii serdes tx amp */ -+ mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP); -+} -+ -+static int -+ar40xx_hw_init(struct ar40xx_priv *priv) -+{ -+ u32 i; -+ -+ ar40xx_ess_reset(priv); -+ -+ if (priv->mii_bus) -+ ar40xx_malibu_init(priv); -+ else -+ return -1; -+ -+ ar40xx_psgmii_self_test(priv); -+ ar40xx_psgmii_self_test_clean(priv); -+ -+ ar40xx_mac_mode_init(priv, priv->mac_mode); -+ -+ for (i = 0; i < priv->dev.ports; i++) -+ ar40xx_init_port(priv, i); -+ -+ ar40xx_init_globals(priv); -+ -+ return 0; -+} -+ -+/* Start of qm error WAR */ -+ -+static -+int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id) -+{ -+ u32 reg; -+ -+ if (port_id < 0 || port_id > 6) -+ return -1; -+ -+ reg = AR40XX_REG_PORT_STATUS(port_id); -+ return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED, -+ (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX)); -+} -+ -+static -+int ar40xx_get_qm_status(struct ar40xx_priv *priv, -+ u32 port_id, u32 *qm_buffer_err) -+{ -+ u32 reg; -+ u32 qm_val; -+ -+ if (port_id < 1 || port_id > 5) { -+ *qm_buffer_err = 0; -+ return -1; -+ } -+ -+ if (port_id < 4) { -+ reg = AR40XX_REG_QM_PORT0_3_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF; -+ } else { -+ reg = AR40XX_REG_QM_PORT4_6_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF; -+ } -+ -+ return 0; -+} -+ -+static void -+ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv) -+{ -+ static int task_count; -+ u32 i; -+ u32 reg, value; -+ u32 link, speed, duplex; -+ u32 qm_buffer_err; -+ u16 port_phy_status[AR40XX_NUM_PORTS]; -+ static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ struct mii_bus *bus = NULL; -+ -+ if (!priv || !priv->mii_bus) -+ return; -+ -+ bus = priv->mii_bus; -+ -+ ++task_count; -+ -+ for (i = 1; i < AR40XX_NUM_PORTS; ++i) { -+ port_phy_status[i] = -+ mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS); -+ speed = link = duplex = port_phy_status[i]; -+ speed &= AR40XX_PHY_SPEC_STATUS_SPEED; -+ speed >>= 14; -+ link &= AR40XX_PHY_SPEC_STATUS_LINK; -+ link >>= 10; -+ duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX; -+ duplex >>= 13; -+ -+ if (link != priv->ar40xx_port_old_link[i]) { -+ ++link_cnt[i]; -+ /* Up --> Down */ -+ if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_UP) && -+ (link == AR40XX_PORT_LINK_DOWN)) { -+ /* LINK_EN disable(MAC force mode)*/ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ ar40xx_rmw(priv, reg, -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ /* Check queue buffer */ -+ qm_err_cnt[i] = 0; -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_NOT_EMPTY; -+ } else { -+ u16 phy_val = 0; -+ -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ ar40xx_force_1g_full(priv, i); -+ /* Ref:QCA8337 Datasheet,Clearing -+ * MENU_CTRL_EN prevents phy to -+ * stuck in 100BT mode when -+ * bringing up the link -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ &phy_val); -+ phy_val &= (~AR40XX_PHY_MANU_CTRL_EN); -+ ar40xx_phy_dbg_write(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } else if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_DOWN) && -+ (link == AR40XX_PORT_LINK_UP)) { -+ /* Down --> Up */ -+ if (priv->port_link_up[i] < 1) { -+ ++priv->port_link_up[i]; -+ } else { -+ /* Change port status */ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ value = ar40xx_read(priv, reg); -+ priv->port_link_up[i] = 0; -+ -+ value &= ~(AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED); -+ value |= speed | (duplex ? BIT(6) : 0); -+ ar40xx_write(priv, reg, value); -+ /* clock switch need such time -+ * to avoid glitch -+ */ -+ usleep_range(100, 200); -+ -+ value |= AR40XX_PORT_AUTO_LINK_EN; -+ ar40xx_write(priv, reg, value); -+ /* HW need such time to make sure link -+ * stable before enable MAC -+ */ -+ usleep_range(100, 200); -+ -+ if (speed == AR40XX_PORT_SPEED_100M) { -+ u16 phy_val = 0; -+ /* Enable @100M, if down to 10M -+ * clock will change smoothly -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ 0, -+ &phy_val); -+ phy_val |= -+ AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i-1, -+ 0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } -+ } -+ } -+ -+ if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) { -+ /* Check QM */ -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ ++qm_err_cnt[i]; -+ } else { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ qm_err_cnt[i] = 0; -+ ar40xx_force_1g_full(priv, i); -+ } -+ } -+ } -+} -+ -+static void -+ar40xx_qm_err_check_work_task(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv, -+ qm_dwork.work); -+ -+ mutex_lock(&priv->qm_lock); -+ -+ ar40xx_sw_mac_polling_task(priv); -+ -+ mutex_unlock(&priv->qm_lock); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+} -+ -+static int -+ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv) -+{ -+ mutex_init(&priv->qm_lock); -+ -+ INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+ -+ return 0; -+} -+ -+/* End of qm error WAR */ -+ -+static int -+ar40xx_vlan_init(struct ar40xx_priv *priv) -+{ -+ int port; -+ unsigned long bmp; -+ -+ /* By default Enable VLAN */ -+ priv->vlan = 1; -+ priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp; -+ priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp; -+ priv->vlan_tagged = priv->cpu_bmp; -+ bmp = priv->lan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_LAN_VLAN; -+ -+ bmp = priv->wan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_WAN_VLAN; -+ -+ return 0; -+} -+ -+static void -+ar40xx_mib_work_func(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv; -+ int err; -+ -+ priv = container_of(work, struct ar40xx_priv, mib_work.work); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ err = ar40xx_mib_capture(priv); -+ if (err) -+ goto next_port; -+ -+ ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false); -+ -+next_port: -+ priv->mib_next_port++; -+ if (priv->mib_next_port >= priv->dev.ports) -+ priv->mib_next_port = 0; -+ -+ mutex_unlock(&priv->mib_lock); -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+} -+ -+static void -+ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members) -+{ -+ u32 t; -+ u32 egress, ingress; -+ u32 pvid = priv->vlan_id[priv->pvid[port]]; -+ -+ if (priv->vlan) { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD; -+ ingress = AR40XX_IN_SECURE; -+ } else { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH; -+ ingress = AR40XX_IN_PORT_ONLY; -+ } -+ -+ t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S; -+ t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t); -+ -+ t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP; -+ t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = members; -+ t |= AR40XX_PORT_LOOKUP_LEARN; -+ t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+static void -+ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val) -+{ -+ if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1, -+ AR40XX_VTU_FUNC1_BUSY, 0)) -+ return; -+ -+ if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD) -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val); -+ -+ op |= AR40XX_VTU_FUNC1_BUSY; -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op); -+} -+ -+static void -+ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask) -+{ -+ u32 op; -+ u32 val; -+ int i; -+ -+ op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S); -+ val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL; -+ for (i = 0; i < AR40XX_NUM_PORTS; i++) { -+ u32 mode; -+ -+ if ((port_mask & BIT(i)) == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_NOT; -+ else if (priv->vlan == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP; -+ else if ((priv->vlan_tagged & BIT(i)) || -+ (priv->vlan_id[priv->pvid[i]] != vid)) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_TAG; -+ else -+ mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG; -+ -+ val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i); -+ } -+ ar40xx_vtu_op(priv, op, val); -+} -+ -+static void -+ar40xx_vtu_flush(struct ar40xx_priv *priv) -+{ -+ ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0); -+} -+ -+static int -+ar40xx_sw_hw_apply(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 portmask[AR40XX_NUM_PORTS]; -+ int i, j; -+ -+ mutex_lock(&priv->reg_mutex); -+ /* flush all vlan entries */ -+ ar40xx_vtu_flush(priv); -+ -+ memset(portmask, 0, sizeof(portmask)); -+ if (priv->vlan) { -+ for (j = 0; j < AR40XX_MAX_VLANS; j++) { -+ u8 vp = priv->vlan_table[j]; -+ -+ if (!vp) -+ continue; -+ -+ for (i = 0; i < dev->ports; i++) { -+ u8 mask = BIT(i); -+ -+ if (vp & mask) -+ portmask[i] |= vp & ~mask; -+ } -+ -+ ar40xx_vtu_load_vlan(priv, priv->vlan_id[j], -+ priv->vlan_table[j]); -+ } -+ } else { -+ /* 8021q vlan disabled */ -+ for (i = 0; i < dev->ports; i++) { -+ if (i == AR40XX_PORT_CPU) -+ continue; -+ -+ portmask[i] = BIT(AR40XX_PORT_CPU); -+ portmask[AR40XX_PORT_CPU] |= BIT(i); -+ } -+ } -+ -+ /* update the port destination mask registers and tag settings */ -+ for (i = 0; i < dev->ports; i++) -+ ar40xx_setup_port(priv, i, portmask[i]); -+ -+ ar40xx_set_mirror_regs(priv); -+ -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_reset_switch(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int i, rv; -+ -+ mutex_lock(&priv->reg_mutex); -+ memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) - -+ offsetof(struct ar40xx_priv, vlan)); -+ -+ for (i = 0; i < AR40XX_MAX_VLANS; i++) -+ priv->vlan_id[i] = i; -+ -+ ar40xx_vlan_init(priv); -+ -+ priv->mirror_rx = false; -+ priv->mirror_tx = false; -+ priv->source_port = 0; -+ priv->monitor_port = 0; -+ -+ mutex_unlock(&priv->reg_mutex); -+ -+ rv = ar40xx_sw_hw_apply(dev); -+ return rv; -+} -+ -+static int -+ar40xx_start(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_hw_init(priv); -+ if (ret) -+ return ret; -+ -+ ret = ar40xx_sw_reset_switch(&priv->dev); -+ if (ret) -+ return ret; -+ -+ /* at last, setup cpu port */ -+ ret = ar40xx_cpuport_setup(priv); -+ if (ret) -+ return ret; -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+ -+ ar40xx_qm_err_check_work_start(priv); -+ -+ return 0; -+} -+ -+static const struct switch_dev_ops ar40xx_sw_ops = { -+ .attr_global = { -+ .attr = ar40xx_sw_attr_globals, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals), -+ }, -+ .attr_port = { -+ .attr = ar40xx_sw_attr_port, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port), -+ }, -+ .attr_vlan = { -+ .attr = ar40xx_sw_attr_vlan, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan), -+ }, -+ .get_port_pvid = ar40xx_sw_get_pvid, -+ .set_port_pvid = ar40xx_sw_set_pvid, -+ .get_vlan_ports = ar40xx_sw_get_ports, -+ .set_vlan_ports = ar40xx_sw_set_ports, -+ .apply_config = ar40xx_sw_hw_apply, -+ .reset_switch = ar40xx_sw_reset_switch, -+ .get_port_link = ar40xx_sw_get_port_link, -+}; -+ -+/* Start of phy driver support */ -+ -+static const u32 ar40xx_phy_ids[] = { -+ 0x004dd0b1, -+ 0x004dd0b2, /* AR40xx */ -+}; -+ -+static bool -+ar40xx_phy_match(u32 phy_id) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++) -+ if (phy_id == ar40xx_phy_ids[i]) -+ return true; -+ -+ return false; -+} -+ -+static bool -+is_ar40xx_phy(struct mii_bus *bus) -+{ -+ unsigned i; -+ -+ for (i = 0; i < 4; i++) { -+ u32 phy_id; -+ -+ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16; -+ phy_id |= mdiobus_read(bus, i, MII_PHYSID2); -+ if (!ar40xx_phy_match(phy_id)) -+ return false; -+ } -+ -+ return true; -+} -+ -+static int -+ar40xx_phy_probe(struct phy_device *phydev) -+{ -+ if (!is_ar40xx_phy(phydev->mdio.bus)) -+ return -ENODEV; -+ -+ ar40xx_priv->mii_bus = phydev->mdio.bus; -+ phydev->priv = ar40xx_priv; -+ if (phydev->mdio.addr == 0) -+ ar40xx_priv->phy = phydev; -+ -+ phydev->supported |= SUPPORTED_1000baseT_Full; -+ phydev->advertising |= ADVERTISED_1000baseT_Full; -+ return 0; -+} -+ -+static void -+ar40xx_phy_remove(struct phy_device *phydev) -+{ -+ ar40xx_priv->mii_bus = NULL; -+ phydev->priv = NULL; -+} -+ -+static int -+ar40xx_phy_config_init(struct phy_device *phydev) -+{ -+ return 0; -+} -+ -+static int -+ar40xx_phy_read_status(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr != 0) -+ return genphy_read_status(phydev); -+ -+ return 0; -+} -+ -+static int -+ar40xx_phy_config_aneg(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr == 0) -+ return 0; -+ -+ return genphy_config_aneg(phydev); -+} -+ -+static struct phy_driver ar40xx_phy_driver = { -+ .phy_id = 0x004d0000, -+ .name = "QCA Malibu", -+ .phy_id_mask = 0xffff0000, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ar40xx_phy_probe, -+ .remove = ar40xx_phy_remove, -+ .config_init = ar40xx_phy_config_init, -+ .config_aneg = ar40xx_phy_config_aneg, -+ .read_status = ar40xx_phy_read_status, -+}; -+ -+static uint16_t ar40xx_gpio_get_phy(unsigned int offset) -+{ -+ return offset / 4; -+} -+ -+static uint16_t ar40xx_gpio_get_reg(unsigned int offset) -+{ -+ return 0x8074 + offset % 4; -+} -+ -+static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset, -+ int value) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset), -+ value ? 0xA000 : 0x8000); -+} -+ -+static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset)) == 0xA000; -+} -+ -+static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset) -+{ -+ return 0; /* only out direction */ -+} -+ -+static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset, -+ int value) -+{ -+ /* -+ * the direction out value is used to set the initial value. -+ * support of this function is required by leds-gpio.c -+ */ -+ ar40xx_gpio_set(gc, offset, value); -+ return 0; -+} -+ -+static void ar40xx_register_gpio(struct device *pdev, -+ struct ar40xx_priv *priv, -+ struct device_node *switch_node) -+{ -+ struct gpio_chip *gc; -+ int err; -+ -+ gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL); -+ if (!gc) -+ return; -+ -+ gc->label = "ar40xx_gpio", -+ gc->base = -1, -+ gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */, -+ gc->parent = pdev; -+ gc->owner = THIS_MODULE; -+ -+ gc->get_direction = ar40xx_gpio_get_dir; -+ gc->direction_output = ar40xx_gpio_dir_out; -+ gc->get = ar40xx_gpio_get; -+ gc->set = ar40xx_gpio_set; -+ gc->can_sleep = true; -+ gc->label = priv->dev.name; -+ gc->of_node = switch_node; -+ -+ err = devm_gpiochip_add_data(pdev, gc, priv); -+ if (err != 0) -+ dev_err(pdev, "Failed to register gpio %d.\n", err); -+} -+ -+/* End of phy driver support */ -+ -+/* Platform driver probe function */ -+ -+static int ar40xx_probe(struct platform_device *pdev) -+{ -+ struct device_node *switch_node; -+ struct device_node *psgmii_node; -+ const __be32 *mac_mode; -+ struct clk *ess_clk; -+ struct switch_dev *swdev; -+ struct ar40xx_priv *priv; -+ u32 len; -+ u32 num_mibs; -+ struct resource psgmii_base = {0}; -+ struct resource switch_base = {0}; -+ int ret; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, priv); -+ ar40xx_priv = priv; -+ -+ switch_node = of_node_get(pdev->dev.of_node); -+ if (of_address_to_resource(switch_node, 0, &switch_base) != 0) -+ return -EIO; -+ -+ priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base); -+ if (IS_ERR(priv->hw_addr)) { -+ dev_err(&pdev->dev, "Failed to ioremap switch_base!\n"); -+ return PTR_ERR(priv->hw_addr); -+ } -+ -+ /*psgmii dts get*/ -+ psgmii_node = of_find_node_by_name(NULL, "ess-psgmii"); -+ if (!psgmii_node) { -+ dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n"); -+ return -EINVAL; -+ } -+ -+ if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0) -+ return -EIO; -+ -+ priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base); -+ if (IS_ERR(priv->psgmii_hw_addr)) { -+ dev_err(&pdev->dev, "psgmii ioremap fail!\n"); -+ return PTR_ERR(priv->psgmii_hw_addr); -+ } -+ -+ mac_mode = of_get_property(switch_node, "switch_mac_mode", &len); -+ if (!mac_mode) { -+ dev_err(&pdev->dev, "Failed to read switch_mac_mode\n"); -+ return -EINVAL; -+ } -+ priv->mac_mode = be32_to_cpup(mac_mode); -+ -+ ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); -+ if (ess_clk) -+ clk_prepare_enable(ess_clk); -+ -+ priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst"); -+ if (IS_ERR(priv->ess_rst)) { -+ dev_err(&pdev->dev, "Failed to get ess_rst control!\n"); -+ return PTR_ERR(priv->ess_rst); -+ } -+ -+ if (of_property_read_u32(switch_node, "switch_cpu_bmp", -+ &priv->cpu_bmp) || -+ of_property_read_u32(switch_node, "switch_lan_bmp", -+ &priv->lan_bmp) || -+ of_property_read_u32(switch_node, "switch_wan_bmp", -+ &priv->wan_bmp)) { -+ dev_err(&pdev->dev, "Failed to read port properties\n"); -+ return -EIO; -+ } -+ -+ ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n"); -+ return -EIO; -+ } -+ -+ mutex_init(&priv->reg_mutex); -+ mutex_init(&priv->mib_lock); -+ INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func); -+ -+ /* register switch */ -+ swdev = &priv->dev; -+ -+ swdev->alias = dev_name(&priv->mii_bus->dev); -+ -+ swdev->cpu_port = AR40XX_PORT_CPU; -+ swdev->name = "QCA AR40xx"; -+ swdev->vlans = AR40XX_MAX_VLANS; -+ swdev->ports = AR40XX_NUM_PORTS; -+ swdev->ops = &ar40xx_sw_ops; -+ ret = register_switch(swdev, NULL); -+ if (ret) -+ goto err_unregister_phy; -+ -+ num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ len = priv->dev.ports * num_mibs * -+ sizeof(*priv->mib_stats); -+ priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); -+ if (!priv->mib_stats) { -+ ret = -ENOMEM; -+ goto err_unregister_switch; -+ } -+ -+ ar40xx_start(priv); -+ -+ if (of_property_read_bool(switch_node, "gpio-controller")) -+ ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node); -+ -+ return 0; -+ -+err_unregister_switch: -+ unregister_switch(&priv->dev); -+err_unregister_phy: -+ phy_driver_unregister(&ar40xx_phy_driver); -+ platform_set_drvdata(pdev, NULL); -+ return ret; -+} -+ -+static int ar40xx_remove(struct platform_device *pdev) -+{ -+ struct ar40xx_priv *priv = platform_get_drvdata(pdev); -+ -+ cancel_delayed_work_sync(&priv->qm_dwork); -+ cancel_delayed_work_sync(&priv->mib_work); -+ -+ unregister_switch(&priv->dev); -+ -+ phy_driver_unregister(&ar40xx_phy_driver); -+ -+ return 0; -+} -+ -+static const struct of_device_id ar40xx_of_mtable[] = { -+ {.compatible = "qcom,ess-switch" }, -+ {} -+}; -+ -+struct platform_driver ar40xx_drv = { -+ .probe = ar40xx_probe, -+ .remove = ar40xx_remove, -+ .driver = { -+ .name = "ar40xx", -+ .of_match_table = ar40xx_of_mtable, -+ }, -+}; -+ -+module_platform_driver(ar40xx_drv); -+ -+MODULE_DESCRIPTION("IPQ40XX ESS driver"); -+MODULE_LICENSE("Dual BSD/GPL"); ---- /dev/null -+++ b/drivers/net/phy/ar40xx.h -@@ -0,0 +1,337 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+ #ifndef __AR40XX_H -+#define __AR40XX_H -+ -+#define AR40XX_MAX_VLANS 128 -+#define AR40XX_NUM_PORTS 6 -+#define AR40XX_NUM_PHYS 5 -+ -+#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s) -+ -+struct ar40xx_priv { -+ struct switch_dev dev; -+ -+ u8 __iomem *hw_addr; -+ u8 __iomem *psgmii_hw_addr; -+ u32 mac_mode; -+ struct reset_control *ess_rst; -+ u32 cpu_bmp; -+ u32 lan_bmp; -+ u32 wan_bmp; -+ -+ struct mii_bus *mii_bus; -+ struct phy_device *phy; -+ -+ /* mutex for qm task */ -+ struct mutex qm_lock; -+ struct delayed_work qm_dwork; -+ u32 port_link_up[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_old_link[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS]; -+ -+ u32 phy_t_status; -+ -+ /* mutex for switch reg access */ -+ struct mutex reg_mutex; -+ -+ /* mutex for mib task */ -+ struct mutex mib_lock; -+ struct delayed_work mib_work; -+ int mib_next_port; -+ u64 *mib_stats; -+ -+ char buf[2048]; -+ -+ /* all fields below will be cleared on reset */ -+ bool vlan; -+ u16 vlan_id[AR40XX_MAX_VLANS]; -+ u8 vlan_table[AR40XX_MAX_VLANS]; -+ u8 vlan_tagged; -+ u16 pvid[AR40XX_NUM_PORTS]; -+ -+ /* mirror */ -+ bool mirror_rx; -+ bool mirror_tx; -+ int source_port; -+ int monitor_port; -+}; -+ -+#define AR40XX_PORT_LINK_UP 1 -+#define AR40XX_PORT_LINK_DOWN 0 -+#define AR40XX_QM_NOT_EMPTY 1 -+#define AR40XX_QM_EMPTY 0 -+ -+#define AR40XX_LAN_VLAN 1 -+#define AR40XX_WAN_VLAN 2 -+ -+enum ar40xx_port_wrapper_cfg { -+ PORT_WRAPPER_PSGMII = 0, -+}; -+ -+struct ar40xx_mib_desc { -+ u32 size; -+ u32 offset; -+ const char *name; -+}; -+ -+#define AR40XX_PORT_CPU 0 -+ -+#define AR40XX_PSGMII_MODE_CONTROL 0x1b4 -+#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0) -+ -+#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288 -+ -+#define AR40XX_MII_ATH_MMD_ADDR 0x0d -+#define AR40XX_MII_ATH_MMD_DATA 0x0e -+#define AR40XX_MII_ATH_DBG_ADDR 0x1d -+#define AR40XX_MII_ATH_DBG_DATA 0x1e -+ -+#define AR40XX_STATS_RXBROAD 0x00 -+#define AR40XX_STATS_RXPAUSE 0x04 -+#define AR40XX_STATS_RXMULTI 0x08 -+#define AR40XX_STATS_RXFCSERR 0x0c -+#define AR40XX_STATS_RXALIGNERR 0x10 -+#define AR40XX_STATS_RXRUNT 0x14 -+#define AR40XX_STATS_RXFRAGMENT 0x18 -+#define AR40XX_STATS_RX64BYTE 0x1c -+#define AR40XX_STATS_RX128BYTE 0x20 -+#define AR40XX_STATS_RX256BYTE 0x24 -+#define AR40XX_STATS_RX512BYTE 0x28 -+#define AR40XX_STATS_RX1024BYTE 0x2c -+#define AR40XX_STATS_RX1518BYTE 0x30 -+#define AR40XX_STATS_RXMAXBYTE 0x34 -+#define AR40XX_STATS_RXTOOLONG 0x38 -+#define AR40XX_STATS_RXGOODBYTE 0x3c -+#define AR40XX_STATS_RXBADBYTE 0x44 -+#define AR40XX_STATS_RXOVERFLOW 0x4c -+#define AR40XX_STATS_FILTERED 0x50 -+#define AR40XX_STATS_TXBROAD 0x54 -+#define AR40XX_STATS_TXPAUSE 0x58 -+#define AR40XX_STATS_TXMULTI 0x5c -+#define AR40XX_STATS_TXUNDERRUN 0x60 -+#define AR40XX_STATS_TX64BYTE 0x64 -+#define AR40XX_STATS_TX128BYTE 0x68 -+#define AR40XX_STATS_TX256BYTE 0x6c -+#define AR40XX_STATS_TX512BYTE 0x70 -+#define AR40XX_STATS_TX1024BYTE 0x74 -+#define AR40XX_STATS_TX1518BYTE 0x78 -+#define AR40XX_STATS_TXMAXBYTE 0x7c -+#define AR40XX_STATS_TXOVERSIZE 0x80 -+#define AR40XX_STATS_TXBYTE 0x84 -+#define AR40XX_STATS_TXCOLLISION 0x8c -+#define AR40XX_STATS_TXABORTCOL 0x90 -+#define AR40XX_STATS_TXMULTICOL 0x94 -+#define AR40XX_STATS_TXSINGLECOL 0x98 -+#define AR40XX_STATS_TXEXCDEFER 0x9c -+#define AR40XX_STATS_TXDEFER 0xa0 -+#define AR40XX_STATS_TXLATECOL 0xa4 -+ -+#define AR40XX_REG_MODULE_EN 0x030 -+#define AR40XX_MODULE_EN_MIB BIT(0) -+ -+#define AR40XX_REG_MIB_FUNC 0x034 -+#define AR40XX_MIB_BUSY BIT(17) -+#define AR40XX_MIB_CPU_KEEP BIT(20) -+#define AR40XX_MIB_FUNC BITS(24, 3) -+#define AR40XX_MIB_FUNC_S 24 -+#define AR40XX_MIB_FUNC_NO_OP 0x0 -+#define AR40XX_MIB_FUNC_FLUSH 0x1 -+ -+#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4) -+#define AR40XX_PORT_SPEED BITS(0, 2) -+#define AR40XX_PORT_STATUS_SPEED_S 0 -+#define AR40XX_PORT_TX_EN BIT(2) -+#define AR40XX_PORT_RX_EN BIT(3) -+#define AR40XX_PORT_STATUS_TXFLOW BIT(4) -+#define AR40XX_PORT_STATUS_RXFLOW BIT(5) -+#define AR40XX_PORT_DUPLEX BIT(6) -+#define AR40XX_PORT_TXHALF_FLOW BIT(7) -+#define AR40XX_PORT_STATUS_LINK_UP BIT(8) -+#define AR40XX_PORT_AUTO_LINK_EN BIT(9) -+#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12) -+ -+#define AR40XX_REG_MAX_FRAME_SIZE 0x078 -+#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14) -+ -+#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4) -+ -+#define AR40XX_REG_EEE_CTRL 0x100 -+#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2) -+ -+#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12) -+#define AR40XX_PORT_VLAN0_DEF_SVID_S 0 -+#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12) -+#define AR40XX_PORT_VLAN0_DEF_CVID_S 16 -+ -+#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6) -+#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2) -+#define AR40XX_PORT_VLAN1_OUT_MODE_S 12 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1 -+#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3 -+ -+#define AR40XX_REG_VTU_FUNC0 0x0610 -+#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14) -+#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) -+#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0 -+#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1 -+#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2 -+#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3 -+#define AR40XX_VTU_FUNC0_IVL BIT(19) -+#define AR40XX_VTU_FUNC0_VALID BIT(20) -+ -+#define AR40XX_REG_VTU_FUNC1 0x0614 -+#define AR40XX_VTU_FUNC1_OP BITS(0, 3) -+#define AR40XX_VTU_FUNC1_OP_NOOP 0 -+#define AR40XX_VTU_FUNC1_OP_FLUSH 1 -+#define AR40XX_VTU_FUNC1_OP_LOAD 2 -+#define AR40XX_VTU_FUNC1_OP_PURGE 3 -+#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4 -+#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5 -+#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6 -+#define AR40XX_VTU_FUNC1_FULL BIT(4) -+#define AR40XX_VTU_FUNC1_PORT BIT(8, 4) -+#define AR40XX_VTU_FUNC1_PORT_S 8 -+#define AR40XX_VTU_FUNC1_VID BIT(16, 12) -+#define AR40XX_VTU_FUNC1_VID_S 16 -+#define AR40XX_VTU_FUNC1_BUSY BIT(31) -+ -+#define AR40XX_REG_FWD_CTRL0 0x620 -+#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4 -+ -+#define AR40XX_REG_FWD_CTRL1 0x624 -+#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7) -+#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0 -+#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7) -+#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8 -+#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7) -+#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16 -+#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7) -+#define AR40XX_FWD_CTRL1_IGMP_S 24 -+ -+#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc) -+#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7) -+#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2) -+#define AR40XX_PORT_LOOKUP_IN_MODE_S 8 -+#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3) -+#define AR40XX_PORT_LOOKUP_STATE_S 16 -+#define AR40XX_PORT_LOOKUP_LEARN BIT(20) -+#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21) -+#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25) -+ -+#define AR40XX_REG_ATU_FUNC 0x60c -+#define AR40XX_ATU_FUNC_OP BITS(0, 4) -+#define AR40XX_ATU_FUNC_OP_NOOP 0x0 -+#define AR40XX_ATU_FUNC_OP_FLUSH 0x1 -+#define AR40XX_ATU_FUNC_OP_LOAD 0x2 -+#define AR40XX_ATU_FUNC_OP_PURGE 0x3 -+#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4 -+#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5 -+#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6 -+#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7 -+#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8 -+#define AR40XX_ATU_FUNC_BUSY BIT(31) -+ -+#define AR40XX_REG_QM_DEBUG_ADDR 0x820 -+#define AR40XX_REG_QM_DEBUG_VALUE 0x824 -+#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d -+#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e -+ -+#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -+#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) -+ -+#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4) -+#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60 -+#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90 -+ -+#define AR40XX_PHY_DEBUG_0 0 -+#define AR40XX_PHY_MANU_CTRL_EN BIT(12) -+ -+#define AR40XX_PHY_DEBUG_2 2 -+ -+#define AR40XX_PHY_SPEC_STATUS 0x11 -+#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10) -+#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13) -+#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2) -+ -+/* port forwarding state */ -+enum { -+ AR40XX_PORT_STATE_DISABLED = 0, -+ AR40XX_PORT_STATE_BLOCK = 1, -+ AR40XX_PORT_STATE_LISTEN = 2, -+ AR40XX_PORT_STATE_LEARN = 3, -+ AR40XX_PORT_STATE_FORWARD = 4 -+}; -+ -+/* ingress 802.1q mode */ -+enum { -+ AR40XX_IN_PORT_ONLY = 0, -+ AR40XX_IN_PORT_FALLBACK = 1, -+ AR40XX_IN_VLAN_ONLY = 2, -+ AR40XX_IN_SECURE = 3 -+}; -+ -+/* egress 802.1q mode */ -+enum { -+ AR40XX_OUT_KEEP = 0, -+ AR40XX_OUT_STRIP_VLAN = 1, -+ AR40XX_OUT_ADD_VLAN = 2 -+}; -+ -+/* port speed */ -+enum { -+ AR40XX_PORT_SPEED_10M = 0, -+ AR40XX_PORT_SPEED_100M = 1, -+ AR40XX_PORT_SPEED_1000M = 2, -+ AR40XX_PORT_SPEED_ERR = 3, -+}; -+ -+#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */ -+ -+#define AR40XX_QM_WORK_DELAY 100 -+ -+#define AR40XX_MIB_FUNC_CAPTURE 0x3 -+ -+#define AR40XX_REG_PORT_STATS_START 0x1000 -+#define AR40XX_REG_PORT_STATS_LEN 0x100 -+ -+#define AR40XX_PORTS_ALL 0x3f -+ -+#define AR40XX_PSGMII_ID 5 -+#define AR40XX_PSGMII_CALB_NUM 100 -+#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d -+#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c -+#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a -+#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380 -+#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280 -+#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a -+#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb -+#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a -+#define AR40XX_MALIBU_PHY_LAST_ADDR 4 -+ -+static inline struct ar40xx_priv * -+swdev_to_ar40xx(struct switch_dev *swdev) -+{ -+ return container_of(swdev, struct ar40xx_priv, dev); -+} -+ -+#endif diff --git a/target/linux/ipq40xx/patches-4.19/706-ar40xx-abort-probe-on-missig-phy.patch b/target/linux/ipq40xx/patches-4.19/706-ar40xx-abort-probe-on-missig-phy.patch deleted file mode 100644 index 19474bff0d..0000000000 --- a/target/linux/ipq40xx/patches-4.19/706-ar40xx-abort-probe-on-missig-phy.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/ar40xx.c -+++ b/drivers/net/phy/ar40xx.c -@@ -2021,6 +2021,12 @@ static int ar40xx_probe(struct platform_ - /* register switch */ - swdev = &priv->dev; - -+ if (priv->mii_bus == NULL) { -+ dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n"); -+ ret = -ENODEV; -+ goto err_missing_phy; -+ } -+ - swdev->alias = dev_name(&priv->mii_bus->dev); - - swdev->cpu_port = AR40XX_PORT_CPU; -@@ -2052,6 +2058,7 @@ err_unregister_switch: - unregister_switch(&priv->dev); - err_unregister_phy: - phy_driver_unregister(&ar40xx_phy_driver); -+err_missing_phy: - platform_set_drvdata(pdev, NULL); - return ret; - } diff --git a/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch deleted file mode 100644 index 6ccf2cd480..0000000000 --- a/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch +++ /dev/null @@ -1,4575 +0,0 @@ -From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@googlemail.com> -Date: Thu, 19 Jan 2017 02:01:31 +0100 -Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> ---- - drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -61,4 +61,13 @@ config QCOM_EMAC - - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - -+config ESSEDMA -+ tristate "Qualcomm Atheros ESS Edma support" -+ ---help--- -+ This driver supports ethernet edma adapter. -+ Say Y to build this driver. -+ -+ To compile this driver as a module, choose M here. The module -+ will be called essedma.ko. -+ - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-$(CONFIG_ESSEDMA) += essedma/ - - obj-$(CONFIG_RMNET) += rmnet/ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile -@@ -0,0 +1,9 @@ -+# -+## Makefile for the Qualcomm Atheros ethernet edma driver -+# -+ -+ -+obj-$(CONFIG_ESSEDMA) += essedma.o -+ -+essedma-objs := edma_axi.o edma.o edma_ethtool.o -+ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -0,0 +1,2143 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/platform_device.h> -+#include <linux/if_vlan.h> -+#include "ess_edma.h" -+#include "edma.h" -+ -+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+bool edma_stp_rstp; -+u16 edma_ath_eth_type; -+ -+/* edma_skb_priority_offset() -+ * get edma skb priority -+ */ -+static unsigned int edma_skb_priority_offset(struct sk_buff *skb) -+{ -+ return (skb->priority >> 2) & 1; -+} -+ -+/* edma_alloc_tx_ring() -+ * Allocate Tx descriptors ring -+ */ -+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ /* Initialize ring */ -+ etdr->size = sizeof(struct edma_sw_desc) * etdr->count; -+ etdr->sw_next_to_fill = 0; -+ etdr->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ etdr->sw_desc = vzalloc(etdr->size); -+ if (!etdr->sw_desc) { -+ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr); -+ return -ENOMEM; -+ } -+ -+ /* Allocate HW descriptors */ -+ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma, -+ GFP_KERNEL); -+ if (!etdr->hw_desc) { -+ dev_err(&pdev->dev, "descriptor allocation for tx ring failed"); -+ vfree(etdr->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_ring() -+ * Free tx rings allocated by edma_alloc_tx_rings -+ */ -+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(etdr->dma)) -+ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc, -+ etdr->dma); -+ -+ vfree(etdr->sw_desc); -+ etdr->sw_desc = NULL; -+} -+ -+/* edma_alloc_rx_ring() -+ * allocate rx descriptor ring -+ */ -+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *erxd) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ erxd->size = sizeof(struct edma_sw_desc) * erxd->count; -+ erxd->sw_next_to_fill = 0; -+ erxd->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ erxd->sw_desc = vzalloc(erxd->size); -+ if (!erxd->sw_desc) -+ return -ENOMEM; -+ -+ /* Alloc HW descriptors */ -+ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma, -+ GFP_KERNEL); -+ if (!erxd->hw_desc) { -+ vfree(erxd->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_ring() -+ * Free rx ring allocated by alloc_rx_ring -+ */ -+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *rxdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(rxdr->dma)) -+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc, -+ rxdr->dma); -+ -+ vfree(rxdr->sw_desc); -+ rxdr->sw_desc = NULL; -+} -+ -+/* edma_configure_tx() -+ * Configure transmission control data -+ */ -+static void edma_configure_tx(struct edma_common_info *edma_cinfo) -+{ -+ u32 txq_ctrl_data; -+ -+ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT); -+ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN; -+ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT); -+ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data); -+} -+ -+ -+/* edma_configure_rx() -+ * configure reception control data -+ */ -+static void edma_configure_rx(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 rss_type, rx_desc1, rxq_ctrl_data; -+ -+ /* Set RSS type */ -+ rss_type = hw->rss_type; -+ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type); -+ -+ /* Set RFD burst number */ -+ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT); -+ -+ /* Set RFD prefetch threshold */ -+ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT); -+ -+ /* Set RFD in host ring low threshold to generte interrupt */ -+ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT); -+ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1); -+ -+ /* Set Rx FIFO threshold to start to DMA data to host */ -+ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; -+ -+ /* Set RX remove vlan bit */ -+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ -+ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); -+} -+ -+/* edma_alloc_rx_buf() -+ * does skb allocation for the received packets. -+ */ -+static int edma_alloc_rx_buf(struct edma_common_info -+ *edma_cinfo, -+ struct edma_rfd_desc_ring *erdr, -+ int cleaned_count, int queue_id) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ unsigned int i; -+ u16 prod_idx, length; -+ u32 reg_data; -+ -+ if (cleaned_count > erdr->count) { -+ dev_err(&pdev->dev, "Incorrect cleaned_count %d", -+ cleaned_count); -+ return -1; -+ } -+ -+ i = erdr->sw_next_to_fill; -+ -+ while (cleaned_count) { -+ sw_desc = &erdr->sw_desc[i]; -+ length = edma_cinfo->rx_head_buffer_len; -+ -+ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { -+ skb = sw_desc->skb; -+ } else { -+ /* alloc skb */ -+ skb = netdev_alloc_skb(edma_netdev[0], length); -+ if (!skb) { -+ /* Better luck next round */ -+ break; -+ } -+ } -+ -+ if (edma_cinfo->page_mode) { -+ struct page *pg = alloc_page(GFP_ATOMIC); -+ -+ if (!pg) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0, -+ edma_cinfo->rx_page_buffer_len, -+ DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ __free_page(pg); -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ skb_fill_page_desc(skb, 0, pg, 0, -+ edma_cinfo->rx_page_buffer_len); -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG; -+ sw_desc->length = edma_cinfo->rx_page_buffer_len; -+ } else { -+ sw_desc->dma = dma_map_single(&pdev->dev, skb->data, -+ length, DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->length = length; -+ } -+ -+ /* Update the buffer info */ -+ sw_desc->skb = skb; -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]); -+ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma); -+ if (++i == erdr->count) -+ i = 0; -+ cleaned_count--; -+ } -+ -+ erdr->sw_next_to_fill = i; -+ -+ if (i == 0) -+ prod_idx = erdr->count - 1; -+ else -+ prod_idx = i - 1; -+ -+ /* Update the producer index */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), ®_data); -+ reg_data &= ~EDMA_RFD_PROD_IDX_BITS; -+ reg_data |= prod_idx; -+ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); -+ return cleaned_count; -+} -+ -+/* edma_init_desc() -+ * update descriptor ring size, buffer and producer/consumer index -+ */ -+static void edma_init_desc(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *rfd_ring; -+ struct edma_tx_desc_ring *etdr; -+ int i = 0, j = 0; -+ u32 data = 0; -+ u16 hw_cons_idx = 0; -+ -+ /* Set the base address of every TPD ring. */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ -+ /* Update descriptor ring base address */ -+ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma); -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data); -+ -+ /* Calculate hardware consumer index */ -+ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff; -+ etdr->sw_next_to_fill = hw_cons_idx; -+ etdr->sw_next_to_clean = hw_cons_idx; -+ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT); -+ data |= hw_cons_idx; -+ -+ /* update producer index */ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data); -+ -+ /* update SW consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx); -+ -+ /* Set TPD ring size */ -+ edma_write_reg(EDMA_REG_TPD_RING_SIZE, -+ edma_cinfo->tx_ring_count & -+ EDMA_TPD_RING_SIZE_MASK); -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ rfd_ring = edma_cinfo->rfd_ring[j]; -+ /* Update Receive Free descriptor ring base address */ -+ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j), -+ (u32)(rfd_ring->dma)); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ data = edma_cinfo->rx_head_buffer_len; -+ if (edma_cinfo->page_mode) -+ data = edma_cinfo->rx_page_buffer_len; -+ -+ data &= EDMA_RX_BUF_SIZE_MASK; -+ data <<= EDMA_RX_BUF_SIZE_SHIFT; -+ -+ /* Update RFD ring size and RX buffer size */ -+ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK) -+ << EDMA_RFD_RING_SIZE_SHIFT; -+ -+ edma_write_reg(EDMA_REG_RX_DESC0, data); -+ -+ /* Disable TX FIFO low watermark and high watermark */ -+ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0); -+ -+ /* Load all of base address above */ -+ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data); -+ data |= 1 << EDMA_LOAD_PTR_SHIFT; -+ edma_write_reg(EDMA_REG_TX_SRAM_PART, data); -+} -+ -+/* edma_receive_checksum -+ * Api to check checksum on receive packets -+ */ -+static void edma_receive_checksum(struct edma_rx_return_desc *rd, -+ struct sk_buff *skb) -+{ -+ skb_checksum_none_assert(skb); -+ -+ /* check the RRD IP/L4 checksum bit to see if -+ * its set, which in turn indicates checksum -+ * failure. -+ */ -+ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK) -+ return; -+ -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+} -+ -+/* edma_clean_rfd() -+ * clean up rx resourcers on error -+ */ -+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index) -+{ -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]); -+ sw_desc = &erdr->sw_desc[index]; -+ if (sw_desc->skb) { -+ dev_kfree_skb_any(sw_desc->skb); -+ sw_desc->skb = NULL; -+ } -+ -+ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc)); -+} -+ -+/* edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd) -+{ -+ int i; -+ u32 priority; -+ u16 port_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ -+ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT) -+ & EDMA_RRD_PORT_TYPE_MASK; -+ /* if port type is 0x4, then only proceed with -+ * other stp/rstp calculation -+ */ -+ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) { -+ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00}; -+ -+ /* calculate the frame priority */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ -+ for (i = 0; i < EDMA_ETH_HDR_LEN; i++) -+ mac_addr[i] = skb->data[i]; -+ -+ /* Check if destination mac addr is bpdu addr */ -+ if (!memcmp(mac_addr, bpdu_mac, 6)) { -+ /* destination mac address is BPDU -+ * destination mac address, then add -+ * atheros header to the packet. -+ */ -+ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) | -+ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) | -+ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id; -+ skb_push(skb, 4); -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type); -+ *(uint16_t *)&skb->data[14] = htons(athr_hdr); -+ } -+ } -+} -+ -+/* -+ * edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb->data_len = 0; -+ skb->tail += (hw->rx_head_buff_size - 16); -+ skb->len = skb->truesize = length; -+ size_remaining = length - (hw->rx_head_buff_size - 16); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ struct sk_buff *skb_prev; -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < hw->rx_head_buff_size) -+ skb_put(skb_temp, size_remaining); -+ else -+ skb_put(skb_temp, hw->rx_head_buff_size); -+ -+ /* -+ * If we are processing the first rfd, we link -+ * skb->frag_list to the skb corresponding to the -+ * first RFD -+ */ -+ if (i == 1) -+ skb_shinfo(skb)->frag_list = skb_temp; -+ else -+ skb_prev->next = skb_temp; -+ skb_prev = skb_temp; -+ skb_temp->next = NULL; -+ -+ skb->data_len += skb_temp->len; -+ size_remaining -= skb_temp->len; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* edma_rx_complete_paged() -+ * Complete Rx processing for paged skbs -+ */ -+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[0]; -+ -+ /* Setup skbuff fields */ -+ skb->len = length; -+ -+ if (likely(num_rfds <= 1)) { -+ skb->data_len = length; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, length); -+ } else { -+ frag->size -= 16; -+ skb->data_len = frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining = length - frag->size; -+ -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, frag->size); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ frag = &skb_shinfo(skb_temp)->frags[0]; -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < edma_cinfo->rx_page_buffer_len) -+ frag->size = size_remaining; -+ -+ skb_fill_page_desc(skb, i, skb_frag_page(frag), -+ 0, frag->size); -+ -+ skb_shinfo(skb_temp)->nr_frags = 0; -+ dev_kfree_skb_any(skb_temp); -+ -+ skb->data_len += frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining -= frag->size; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* -+ * edma_rx_complete() -+ * Main api called from the poll function to process rx packets. -+ */ -+static void edma_rx_complete(struct edma_common_info *edma_cinfo, -+ int *work_done, int work_to_do, int queue_id, -+ struct napi_struct *napi) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id]; -+ struct net_device *netdev; -+ struct edma_adapter *adapter; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ struct edma_rx_return_desc *rd; -+ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1, -+ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0; -+ u32 data = 0; -+ u8 *vaddr; -+ int port_id, i, drop_count = 0; -+ u32 priority; -+ u16 count = erdr->count, rfd_avail; -+ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; -+ -+ sw_next_to_clean = erdr->sw_next_to_clean; -+ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ -+ do { -+ while (sw_next_to_clean != hw_next_to_clean) { -+ if (!work_to_do) -+ break; -+ -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb = sw_desc->skb; -+ -+ /* Unmap the allocated buffer */ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ else -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ /* Get RRD */ -+ if (edma_cinfo->page_mode) { -+ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0])); -+ memcpy((uint8_t *)&rrd[0], vaddr, 16); -+ rd = (struct edma_rx_return_desc *)rrd; -+ kunmap_atomic(vaddr); -+ } else { -+ rd = (struct edma_rx_return_desc *)skb->data; -+ } -+ -+ /* Check if RRD is valid */ -+ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ -+ /* Get the number of RFDs from RRD */ -+ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK; -+ -+ /* Get Rx port ID from switch */ -+ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK; -+ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) { -+ dev_err(&pdev->dev, "Invalid RRD source port bit set"); -+ for (i = 0; i < num_rfds; i++) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ cleaned_count++; -+ } -+ continue; -+ } -+ -+ /* check if we have a sink for the data we receive. -+ * If the interface isn't setup, we have to drop the -+ * incoming data for now. -+ */ -+ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id]; -+ if (!netdev) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ adapter = netdev_priv(netdev); -+ -+ /* This code is added to handle a usecase where high -+ * priority stream and a low priority stream are -+ * received simultaneously on DUT. The problem occurs -+ * if one of the Rx rings is full and the corresponding -+ * core is busy with other stuff. This causes ESS CPU -+ * port to backpressure all incoming traffic including -+ * high priority one. We monitor free descriptor count -+ * on each CPU and whenever it reaches threshold (< 80), -+ * we drop all low priority traffic and let only high -+ * priotiy traffic pass through. We can hence avoid -+ * ESS CPU port to send backpressure on high priroity -+ * stream. -+ */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) { -+ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1); -+ if (rfd_avail < EDMA_RFD_AVAIL_THR) { -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE; -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ adapter->stats.rx_dropped++; -+ cleaned_count++; -+ drop_count++; -+ if (drop_count == 3) { -+ work_to_do--; -+ (*work_done)++; -+ drop_count = 0; -+ } -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ /* If buffer clean count reaches 16, we replenish HW buffers. */ -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ continue; -+ } -+ } -+ -+ work_to_do--; -+ (*work_done)++; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ -+ cleaned_count++; -+ -+ /* Get the packet size and allocate buffer */ -+ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK; -+ -+ if (edma_cinfo->page_mode) { -+ /* paged skb */ -+ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ if (!pskb_may_pull(skb, ETH_HLEN)) { -+ dev_kfree_skb_any(skb); -+ continue; -+ } -+ } else { -+ /* single or fraglist skb */ -+ -+ /* Addition of 16 bytes is required, as in the packet -+ * first 16 bytes are rrd descriptors, so actual data -+ * starts from an offset of 16. -+ */ -+ skb_reserve(skb, 16); -+ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) { -+ skb_put(skb, length); -+ } else { -+ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ } -+ } -+ -+ if (edma_stp_rstp) { -+ edma_rx_complete_stp_rstp(skb, port_id, rd); -+ } -+ -+ skb->protocol = eth_type_trans(skb, netdev); -+ -+ /* Record Rx queue for RFS/RPS and fill flow hash from HW */ -+ skb_record_rx_queue(skb, queue_to_rxid[queue_id]); -+ if (netdev->features & NETIF_F_RXHASH) { -+ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT); -+ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END)) -+ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4); -+ } -+ -+#ifdef CONFIG_NF_FLOW_COOKIE -+ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK; -+#endif -+ edma_receive_checksum(rd, skb); -+ -+ /* Process VLAN HW acceleration indication provided by HW */ -+ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) { -+ vlan = rd->rrd4; -+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN)) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); -+ else if (rd->rrd1 & EDMA_RRD_SVLAN) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan); -+ } -+ -+ /* Update rx statistics */ -+ adapter->stats.rx_packets++; -+ adapter->stats.rx_bytes += length; -+ -+ /* Check if we reached refill threshold */ -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ -+ /* At this point skb should go to stack */ -+ napi_gro_receive(napi, skb); -+ } -+ -+ /* Check if we still have NAPI budget */ -+ if (!work_to_do) -+ break; -+ -+ /* Read index once again since we still have NAPI budget */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ } while (hw_next_to_clean != sw_next_to_clean); -+ -+ erdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* Refill here in case refill threshold wasn't reached */ -+ if (likely(cleaned_count)) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ if (ret_count) -+ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ erdr->sw_next_to_clean); -+ } -+} -+ -+/* edma_delete_rfs_filter() -+ * Remove RFS filter from switch -+ */ -+static int edma_delete_rfs_filter(struct edma_adapter *adapter, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *keys = &filter_node->keys; -+ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, -+ flow_get_u32_src(keys), flow_get_u32_dst(keys), -+ keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, filter_node->rq_id, 0); -+ -+ return res; -+} -+ -+/* edma_add_rfs_filter() -+ * Add RFS filter to switch -+ */ -+static int edma_add_rfs_filter(struct edma_adapter *adapter, -+ struct flow_keys *keys, u16 rq, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *dest_keys = &filter_node->keys; -+ -+ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys)); -+/* -+ dest_keys->control = keys->control; -+ dest_keys->basic = keys->basic; -+ dest_keys->addrs = keys->addrs; -+ dest_keys->ports = keys->ports; -+ dest_keys.ip_proto = keys->ip_proto; -+*/ -+ /* Call callback registered by ESS driver */ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys), -+ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, rq, 1); -+ -+ return res; -+} -+ -+/* edma_rfs_key_search() -+ * Look for existing RFS entry -+ */ -+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h, -+ struct flow_keys *key) -+{ -+ struct edma_rfs_filter_node *p; -+ -+ hlist_for_each_entry(p, h, node) -+ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) && -+ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) && -+ p->keys.ports.src == key->ports.src && -+ p->keys.ports.dst == key->ports.dst && -+ p->keys.basic.ip_proto == key->basic.ip_proto) -+ return p; -+ return NULL; -+} -+ -+/* edma_initialise_rfs_flow_table() -+ * Initialise EDMA RFS flow table -+ */ -+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ spin_lock_init(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Initialize EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) -+ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]); -+ -+ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES; -+ adapter->rfs.filter_available = adapter->rfs.max_num_filter; -+ adapter->rfs.hashtoclean = 0; -+ -+ /* Add timer to get periodic RFS updates from OS */ -+ timer_setup(&adapter->rfs.expire_rfs, edma_flow_may_expire, 0); -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_free_rfs_flow_table() -+ * Free EDMA RFS flow table -+ */ -+static void edma_free_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ /* Remove sync timer */ -+ del_timer_sync(&adapter->rfs.expire_rfs); -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Free EDMA RFS table entries */ -+ adapter->rfs.filter_available = 0; -+ -+ /* Clean-up EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *filter_node; -+ int res; -+ -+ hhead = &adapter->rfs.hlist_head[i]; -+ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "EDMA going down but RFS entry %d not allowed to be flushed by Switch", -+ filter_node->flow_id); -+ hlist_del(&filter_node->node); -+ kfree(filter_node); -+ } -+ } -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+} -+ -+/* edma_tx_unmap_and_free() -+ * clean TX buffer -+ */ -+static inline void edma_tx_unmap_and_free(struct platform_device *pdev, -+ struct edma_sw_desc *sw_desc) -+{ -+ struct sk_buff *skb = sw_desc->skb; -+ -+ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) || -+ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST))) -+ /* unmap_single for skb head area */ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG) -+ /* unmap page for paged fragments */ -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST)) -+ dev_kfree_skb_any(skb); -+ -+ sw_desc->flags = 0; -+} -+ -+/* edma_tx_complete() -+ * Used to clean tx queues and update hardware and consumer index -+ */ -+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i; -+ -+ u16 sw_next_to_clean = etdr->sw_next_to_clean; -+ u16 hw_next_to_clean; -+ u32 data = 0; -+ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK; -+ -+ /* clean the buffer here */ -+ while (sw_next_to_clean != hw_next_to_clean) { -+ sw_desc = &etdr->sw_desc[sw_next_to_clean]; -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1); -+ } -+ -+ etdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* update the TPD consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean); -+ -+ /* Wake the queue if queue is stopped and netdev link is up */ -+ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) { -+ if (netif_tx_queue_stopped(etdr->nq[i])) { -+ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i])) -+ netif_tx_wake_queue(etdr->nq[i]); -+ } -+ } -+} -+ -+/* edma_get_tx_buffer() -+ * Get sw_desc corresponding to the TPD -+ */ -+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc *tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc]; -+} -+ -+/* edma_get_next_tpd() -+ * Return a TPD descriptor for transfer -+ */ -+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u16 sw_next_to_fill = etdr->sw_next_to_fill; -+ struct edma_tx_desc *tpd_desc = -+ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]); -+ -+ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1); -+ -+ return tpd_desc; -+} -+ -+/* edma_tpd_available() -+ * Check number of free TPDs -+ */ -+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ u16 sw_next_to_fill; -+ u16 sw_next_to_clean; -+ u16 count = 0; -+ -+ sw_next_to_clean = etdr->sw_next_to_clean; -+ sw_next_to_fill = etdr->sw_next_to_fill; -+ -+ if (likely(sw_next_to_clean <= sw_next_to_fill)) -+ count = etdr->count; -+ -+ return count + sw_next_to_clean - sw_next_to_fill - 1; -+} -+ -+/* edma_tx_queue_get() -+ * Get the starting number of the queue -+ */ -+static inline int edma_tx_queue_get(struct edma_adapter *adapter, -+ struct sk_buff *skb, int txq_id) -+{ -+ /* skb->priority is used as an index to skb priority table -+ * and based on packet priority, correspong queue is assigned. -+ */ -+ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb); -+} -+ -+/* edma_tx_update_hw_idx() -+ * update the producer index for the ring transmitted -+ */ -+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo, -+ struct sk_buff *skb, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u32 tpd_idx_data; -+ -+ /* Read and update the producer index */ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data); -+ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS; -+ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK) -+ << EDMA_TPD_PROD_IDX_SHIFT; -+ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data); -+} -+ -+/* edma_rollback_tx() -+ * Function to retrieve tx resources in case of error -+ */ -+static void edma_rollback_tx(struct edma_adapter *adapter, -+ struct edma_tx_desc *start_tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct edma_tx_desc *tpd = NULL; -+ u16 start_index, index; -+ -+ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc); -+ -+ index = start_index; -+ while (index != etdr->sw_next_to_fill) { -+ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]); -+ sw_desc = &etdr->sw_desc[index]; -+ edma_tx_unmap_and_free(adapter->pdev, sw_desc); -+ memset(tpd, 0, sizeof(struct edma_tx_desc)); -+ if (++index == etdr->count) -+ index = 0; -+ } -+ etdr->sw_next_to_fill = start_index; -+} -+ -+/* edma_tx_map_and_fill() -+ * gets called from edma_xmit_frame -+ * -+ * This is where the dma of the buffer to be transmitted -+ * gets mapped -+ */ -+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo, -+ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id, -+ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap, -+ bool packet_is_rstp, int nr_frags) -+{ -+ struct edma_sw_desc *sw_desc = NULL; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL; -+ struct sk_buff *iter_skb; -+ int i = 0; -+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; -+ u16 buf_len, lso_desc_len = 0; -+ -+ /* It should either be a nr_frags skb or fraglist skb but not both */ -+ BUG_ON(nr_frags && skb_has_frag_list(skb)); -+ -+ if (skb_is_gso(skb)) { -+ /* TODO: What additional checks need to be performed here */ -+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { -+ lso_word1 |= EDMA_TPD_IPV4_EN; -+ ip_hdr(skb)->check = 0; -+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, -+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { -+ lso_word1 |= EDMA_TPD_LSO_V2_EN; -+ ipv6_hdr(skb)->payload_len = 0; -+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, -+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else -+ return -EINVAL; -+ -+ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) | -+ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT); -+ } else if (flags_transmit & EDMA_HW_CHECKSUM) { -+ u8 css, cso; -+ cso = skb_checksum_start_offset(skb); -+ css = cso + skb->csum_offset; -+ -+ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN); -+ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT; -+ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT); -+ } -+ -+ if (skb->protocol == htons(ETH_P_PPP_SES)) -+ word1 |= EDMA_TPD_PPPOE_EN; -+ -+ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) { -+ switch(skb->vlan_proto) { -+ case htons(ETH_P_8021Q): -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT; -+ break; -+ case htons(ETH_P_8021AD): -+ word1 |= (1 << EDMA_TX_INS_SVLAN); -+ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT; -+ break; -+ default: -+ dev_err(&pdev->dev, "no ctag or stag present\n"); -+ goto vlan_tag_error; -+ } -+ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) { -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT; -+ } -+ -+ if (packet_is_rstp) { -+ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT; -+ } else { -+ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ } -+ -+ buf_len = skb_headlen(skb); -+ -+ if (lso_word1) { -+ if (lso_word1 & EDMA_TPD_LSO_V2_EN) { -+ -+ /* IPv6 LSOv2 descriptor */ -+ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE; -+ -+ /* LSOv2 descriptor overrides addr field to pass length */ -+ tpd->addr = cpu_to_le16(skb->len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ if (!start_tpd) -+ start_tpd = tpd; -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so skb will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ -+ /* The last buffer info contain the skb address, -+ * so it will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ buf_len = 0; -+ } -+ -+ if (likely(buf_len)) { -+ -+ /* TODO Do not dequeue descriptor if there is a potential error */ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ -+ if (!start_tpd) -+ start_tpd = tpd; -+ -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so it will be free after unmap -+ */ -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ /* Walk through all paged fragments */ -+ while (nr_frags--) { -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; -+ buf_len = skb_frag_size(frag); -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG; -+ -+ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ i++; -+ } -+ -+ /* Walk through all fraglist skbs */ -+ skb_walk_frags(skb, iter_skb) { -+ buf_len = iter_skb->len; -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ iter_skb->data, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST; -+ } -+ -+ if (tpd) -+ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT; -+ -+ sw_desc->skb = skb; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST; -+ -+ return 0; -+ -+dma_error: -+ edma_rollback_tx(adapter, start_tpd, queue_id); -+ dev_err(&pdev->dev, "TX DMA map failed\n"); -+vlan_tag_error: -+ return -ENOMEM; -+} -+ -+/* edma_check_link() -+ * check Link status -+ */ -+static int edma_check_link(struct edma_adapter *adapter) -+{ -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!(adapter->poll_required)) -+ return __EDMA_LINKUP; -+ -+ if (phydev->link) -+ return __EDMA_LINKUP; -+ -+ return __EDMA_LINKDOWN; -+} -+ -+/* edma_adjust_link() -+ * check for edma link status -+ */ -+void edma_adjust_link(struct net_device *netdev) -+{ -+ int status; -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!test_bit(__EDMA_UP, &adapter->state_flags)) -+ return; -+ -+ status = edma_check_link(adapter); -+ -+ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ if (netif_running(netdev)) -+ netif_tx_wake_all_queues(netdev); -+ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name); -+ adapter->link_state = __EDMA_LINKDOWN; -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ } -+} -+ -+/* edma_get_stats() -+ * Statistics api used to retreive the tx/rx statistics -+ */ -+struct net_device_stats *edma_get_stats(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ return &adapter->stats; -+} -+ -+/* edma_xmit() -+ * Main api to be called by the core for packet transmission -+ */ -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *net_dev) -+{ -+ struct edma_adapter *adapter = netdev_priv(net_dev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_tx_desc_ring *etdr; -+ u16 from_cpu, dp_bitmap, txq_id; -+ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id; -+ unsigned int flags_transmit = 0; -+ bool packet_is_rstp = false; -+ struct netdev_queue *nq = NULL; -+ -+ if (skb_shinfo(skb)->nr_frags) { -+ nr_frags = skb_shinfo(skb)->nr_frags; -+ num_tpds_needed += nr_frags; -+ } else if (skb_has_frag_list(skb)) { -+ struct sk_buff *iter_skb; -+ -+ skb_walk_frags(skb, iter_skb) -+ num_tpds_needed++; -+ } -+ -+ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) { -+ dev_err(&net_dev->dev, -+ "skb received with fragments %d which is more than %lu", -+ num_tpds_needed, EDMA_MAX_SKB_FRAGS); -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ return NETDEV_TX_OK; -+ } -+ -+ if (edma_stp_rstp) { -+ u16 ath_hdr, ath_eth_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]); -+ if (ath_eth_type == edma_ath_eth_type) { -+ packet_is_rstp = true; -+ ath_hdr = htons(*(uint16_t *)&skb->data[14]); -+ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK; -+ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT; -+ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN); -+ -+ skb_pull(skb, 4); -+ -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ } -+ } -+ -+ /* this will be one of the 4 TX queues exposed to linux kernel */ -+ txq_id = skb_get_queue_mapping(skb); -+ queue_id = edma_tx_queue_get(adapter, skb, txq_id); -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ nq = netdev_get_tx_queue(net_dev, txq_id); -+ -+ local_bh_disable(); -+ /* Tx is not handled in bottom half context. Hence, we need to protect -+ * Tx from tasks and bottom half -+ */ -+ -+ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) { -+ /* not enough descriptor, just stop queue */ -+ netif_tx_stop_queue(nq); -+ local_bh_enable(); -+ dev_dbg(&net_dev->dev, "Not enough descriptors available"); -+ edma_cinfo->edma_ethstats.tx_desc_error++; -+ return NETDEV_TX_BUSY; -+ } -+ -+ /* Check and mark VLAN tag offload */ -+ if (skb_vlan_tag_present(skb)) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -+ else if (adapter->default_vlan_tag) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ -+ /* Check and mark checksum offload */ -+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) -+ flags_transmit |= EDMA_HW_CHECKSUM; -+ -+ /* Map and fill descriptor for Tx */ -+ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id, -+ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags); -+ if (ret) { -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ goto netdev_okay; -+ } -+ -+ /* Update SW producer index */ -+ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id); -+ -+ /* update tx statistics */ -+ adapter->stats.tx_packets++; -+ adapter->stats.tx_bytes += skb->len; -+ -+netdev_okay: -+ local_bh_enable(); -+ return NETDEV_TX_OK; -+} -+ -+/* -+ * edma_flow_may_expire() -+ * Timer function called periodically to delete the node -+ */ -+void edma_flow_may_expire(struct timer_list *t) -+{ -+ struct edma_rfs_flow_table *table = from_timer(table, t, expire_rfs); -+ struct edma_adapter *adapter = -+ container_of(table, typeof(*adapter), rfs); -+ int j; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *n; -+ bool res; -+ -+ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++]; -+ hlist_for_each_entry_safe(n, tmp, hhead, node) { -+ res = rps_may_expire_flow(adapter->netdev, n->rq_id, -+ n->flow_id, n->filter_id); -+ if (res) { -+ int ret; -+ ret = edma_delete_rfs_filter(adapter, n); -+ if (ret < 0) -+ dev_dbg(&adapter->netdev->dev, -+ "RFS entry %d not allowed to be flushed by Switch", -+ n->flow_id); -+ else { -+ hlist_del(&n->node); -+ kfree(n); -+ adapter->rfs.filter_available++; -+ } -+ } -+ } -+ } -+ -+ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1); -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_rx_flow_steer() -+ * Called by core to to steer the flow to CPU -+ */ -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id) -+{ -+ struct flow_keys keys; -+ struct edma_rfs_filter_node *filter_node; -+ struct edma_adapter *adapter = netdev_priv(dev); -+ u16 hash_tblid; -+ int res; -+ -+ if (skb->protocol == htons(ETH_P_IPV6)) { -+ dev_err(&adapter->pdev->dev, "IPv6 not supported\n"); -+ res = -EINVAL; -+ goto no_protocol_err; -+ } -+ -+ /* Dissect flow parameters -+ * We only support IPv4 + TCP/UDP -+ */ -+ res = skb_flow_dissect_flow_keys(skb, &keys, 0); -+ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) { -+ res = -EPROTONOSUPPORT; -+ goto no_protocol_err; -+ } -+ -+ /* Check if table entry exists */ -+ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys); -+ -+ if (filter_node) { -+ if (rxq == filter_node->rq_id) { -+ res = -EEXIST; -+ goto out; -+ } else { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ else { -+ adapter->rfs.filter_available++; -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ } else { -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ } -+ } -+ } -+ } else { -+ if (adapter->rfs.filter_available == 0) { -+ res = -EBUSY; -+ goto out; -+ } -+ -+ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC); -+ if (!filter_node) { -+ res = -ENOMEM; -+ goto out; -+ } -+ -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ kfree(filter_node); -+ goto out; -+ } -+ -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ filter_node->flow_id = flow_id; -+ filter_node->keys = keys; -+ INIT_HLIST_NODE(&filter_node->node); -+ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]); -+ } -+ -+out: -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+no_protocol_err: -+ return res; -+} -+ -+/* edma_register_rfs_filter() -+ * Add RFS filter callback -+ */ -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ if (adapter->set_rfs_rule) { -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ return -1; -+ } -+ -+ adapter->set_rfs_rule = set_filter; -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ return 0; -+} -+ -+/* edma_alloc_tx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, err = 0; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+ if (err) { -+ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i); -+ return err; -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_rings() -+ * Free tx rings -+ */ -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+} -+ -+/* edma_free_tx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_tx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_tx_desc_ring *etdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ for (j = 0; j < EDMA_TX_RING_SIZE; j++) { -+ sw_desc = &etdr->sw_desc[j]; -+ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD | -+ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST)) -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ } -+ } -+} -+ -+/* edma_alloc_rx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, err = 0; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ if (err) { -+ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i); -+ return err; -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_rings() -+ * free rx rings -+ */ -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+} -+ -+/* edma_free_queues() -+ * Free the queues allocaated -+ */ -+void edma_free_queues(struct edma_common_info *edma_cinfo) -+{ -+ int i , j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ if (edma_cinfo->tpd_ring[i]) -+ kfree(edma_cinfo->tpd_ring[i]); -+ edma_cinfo->tpd_ring[i] = NULL; -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ if (edma_cinfo->rfd_ring[j]) -+ kfree(edma_cinfo->rfd_ring[j]); -+ edma_cinfo->rfd_ring[j] = NULL; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->num_rx_queues = 0; -+ edma_cinfo->num_tx_queues = 0; -+ -+ return; -+} -+ -+/* edma_free_rx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_rx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *erdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, k; -+ -+ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) { -+ erdr = edma_cinfo->rfd_ring[k]; -+ for (j = 0; j < EDMA_RX_RING_SIZE; j++) { -+ sw_desc = &erdr->sw_desc[j]; -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) { -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) { -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } -+ } -+ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ -+ } -+} -+ -+/* edma_alloc_queues_tx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr; -+ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL); -+ if (!etdr) -+ goto err; -+ etdr->count = edma_cinfo->tx_ring_count; -+ edma_cinfo->tpd_ring[i] = etdr; -+ } -+ -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_alloc_queues_rx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *rfd_ring; -+ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring), -+ GFP_KERNEL); -+ if (!rfd_ring) -+ goto err; -+ rfd_ring->count = edma_cinfo->rx_ring_count; -+ edma_cinfo->rfd_ring[j] = rfd_ring; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_clear_irq_status() -+ * Clear interrupt status -+ */ -+void edma_clear_irq_status() -+{ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff); -+ edma_write_reg(EDMA_REG_WOL_ISR, 0x1); -+}; -+ -+/* edma_configure() -+ * Configure skb, edma interrupts and control register. -+ */ -+int edma_configure(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 intr_modrt_data; -+ u32 intr_ctrl_data = 0; -+ int i, j, ret_count; -+ -+ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data); -+ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT); -+ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT; -+ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data); -+ -+ edma_clear_irq_status(); -+ -+ /* Clear any WOL status */ -+ edma_write_reg(EDMA_REG_WOL_CTRL, 0); -+ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT); -+ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); -+ edma_configure_tx(edma_cinfo); -+ edma_configure_rx(edma_cinfo); -+ -+ /* Allocate the RX buffer */ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j]; -+ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j); -+ if (ret_count) { -+ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n"); -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ /* Configure descriptor Ring */ -+ edma_init_desc(edma_cinfo); -+ return 0; -+} -+ -+/* edma_irq_enable() -+ * Enable default interrupt generation settings -+ */ -+void edma_irq_enable(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i, j; -+ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask); -+} -+ -+/* edma_irq_disable() -+ * Disable Interrupt -+ */ -+void edma_irq_disable(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0); -+ edma_write_reg(EDMA_REG_MISC_IMR, 0); -+ edma_write_reg(EDMA_REG_WOL_IMR, 0); -+} -+ -+/* edma_free_irqs() -+ * Free All IRQs -+ */ -+void edma_free_irqs(struct edma_adapter *adapter) -+{ -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i, j; -+ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2); -+ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++) -+ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++) -+ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ } -+} -+ -+/* edma_enable_rx_ctrl() -+ * Enable RX queue control -+ */ -+void edma_enable_rx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data |= EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+} -+ -+ -+/* edma_enable_tx_ctrl() -+ * Enable TX queue control -+ */ -+void edma_enable_tx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data |= EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_stop_rx_tx() -+ * Disable RX/TQ Queue control -+ */ -+void edma_stop_rx_tx(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data &= ~EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data &= ~EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_reset() -+ * Reset the EDMA -+ */ -+int edma_reset(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ -+ edma_irq_disable(edma_cinfo); -+ -+ edma_clear_irq_status(); -+ -+ edma_stop_rx_tx(hw); -+ -+ return 0; -+} -+ -+/* edma_fill_netdev() -+ * Fill netdev for each etdr -+ */ -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id, -+ int dev, int txq_id) -+{ -+ struct edma_tx_desc_ring *etdr; -+ int i = 0; -+ -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ while (etdr->netdev[i]) -+ i++; -+ -+ if (i >= EDMA_MAX_NETDEV_PER_QUEUE) -+ return -1; -+ -+ /* Populate the netdev associated with the tpd ring */ -+ etdr->netdev[i] = edma_netdev[dev]; -+ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id); -+ -+ return 0; -+} -+ -+/* edma_set_mac() -+ * Change the Ethernet Address of the NIC -+ */ -+int edma_set_mac_addr(struct net_device *netdev, void *p) -+{ -+ struct sockaddr *addr = p; -+ -+ if (!is_valid_ether_addr(addr->sa_data)) -+ return -EINVAL; -+ -+ if (netif_running(netdev)) -+ return -EBUSY; -+ -+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); -+ return 0; -+} -+ -+/* edma_set_stp_rstp() -+ * set stp/rstp -+ */ -+void edma_set_stp_rstp(bool rstp) -+{ -+ edma_stp_rstp = rstp; -+} -+ -+/* edma_assign_ath_hdr_type() -+ * assign atheros header eth type -+ */ -+void edma_assign_ath_hdr_type(int eth_type) -+{ -+ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK; -+} -+ -+/* edma_get_default_vlan_tag() -+ * Used by other modules to get the default vlan tag -+ */ -+int edma_get_default_vlan_tag(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->default_vlan_tag) -+ return adapter->default_vlan_tag; -+ -+ return 0; -+} -+ -+/* edma_open() -+ * gets called when netdevice is up, start the queue. -+ */ -+int edma_open(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct platform_device *pdev = adapter->edma_cinfo->pdev; -+ -+ netif_tx_start_all_queues(netdev); -+ edma_initialise_rfs_flow_table(adapter); -+ set_bit(__EDMA_UP, &adapter->state_flags); -+ -+ /* if Link polling is enabled, in our case enabled for WAN, then -+ * do a phy start, else always set link as UP -+ */ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) { -+ phy_start(adapter->phydev); -+ phy_start_aneg(adapter->phydev); -+ adapter->link_state = __EDMA_LINKDOWN; -+ } else { -+ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n"); -+ } -+ } else { -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ } -+ -+ return 0; -+} -+ -+ -+/* edma_close() -+ * gets called when netdevice is down, stops the queue. -+ */ -+int edma_close(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ edma_free_rfs_flow_table(adapter); -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) -+ phy_stop(adapter->phydev); -+ } -+ -+ adapter->link_state = __EDMA_LINKDOWN; -+ -+ /* Set GMAC state to UP before link state is checked -+ */ -+ clear_bit(__EDMA_UP, &adapter->state_flags); -+ -+ return 0; -+} -+ -+/* edma_poll -+ * polling function that gets called when the napi gets scheduled. -+ * -+ * Main sequence of task performed in this api -+ * is clear irq status -> clear_tx_irq -> clean_rx_irq-> -+ * enable interrupts. -+ */ -+int edma_poll(struct napi_struct *napi, int budget) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi, -+ struct edma_per_cpu_queues_info, napi); -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ u32 reg_data; -+ u32 shadow_rx_status, shadow_tx_status; -+ int queue_id; -+ int i, work_done = 0; -+ -+ /* Store the Rx/Tx status by ANDing it with -+ * appropriate CPU RX?TX mask -+ */ -+ edma_read_reg(EDMA_REG_RX_ISR, ®_data); -+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask; -+ shadow_rx_status = edma_percpu_info->rx_status; -+ edma_read_reg(EDMA_REG_TX_ISR, ®_data); -+ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask; -+ shadow_tx_status = edma_percpu_info->tx_status; -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, -+ * we will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->tx_status) { -+ queue_id = ffs(edma_percpu_info->tx_status) - 1; -+ edma_tx_complete(edma_cinfo, queue_id); -+ edma_percpu_info->tx_status &= ~(1 << queue_id); -+ } -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, we -+ * will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->rx_status) { -+ queue_id = ffs(edma_percpu_info->rx_status) - 1; -+ edma_rx_complete(edma_cinfo, &work_done, -+ budget, queue_id, napi); -+ -+ if (likely(work_done < budget)) -+ edma_percpu_info->rx_status &= ~(1 << queue_id); -+ else -+ break; -+ } -+ -+ /* Clear the status register, to avoid the interrupts to -+ * reoccur.This clearing of interrupt status register is -+ * done here as writing to status register only takes place -+ * once the producer/consumer index has been updated to -+ * reflect that the packet transmission/reception went fine. -+ */ -+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status); -+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status); -+ -+ /* If budget not fully consumed, exit the polling mode */ -+ if (likely(work_done < budget)) { -+ napi_complete(napi); -+ -+ /* re-enable the interrupts */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1); -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1); -+ } -+ -+ return work_done; -+} -+ -+/* edma interrupt() -+ * interrupt handler -+ */ -+irqreturn_t edma_interrupt(int irq, void *dev) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev; -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ int i; -+ -+ /* Unmask the TX/RX interrupt register */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0); -+ -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0); -+ -+ napi_schedule(&edma_percpu_info->napi); -+ -+ return IRQ_HANDLED; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -0,0 +1,447 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _EDMA_H_ -+#define _EDMA_H_ -+ -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/module.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/skbuff.h> -+#include <linux/io.h> -+#include <linux/vmalloc.h> -+#include <linux/pagemap.h> -+#include <linux/smp.h> -+#include <linux/platform_device.h> -+#include <linux/of.h> -+#include <linux/of_device.h> -+#include <linux/kernel.h> -+#include <linux/device.h> -+#include <linux/sysctl.h> -+#include <linux/phy.h> -+#include <linux/of_net.h> -+#include <net/checksum.h> -+#include <net/ip6_checksum.h> -+#include <asm-generic/bug.h> -+#include "ess_edma.h" -+ -+#define EDMA_CPU_CORES_SUPPORTED 4 -+#define EDMA_MAX_PORTID_SUPPORTED 5 -+#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED -+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1) -+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */ -+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */ -+ -+#define EDMA_MAX_RECEIVE_QUEUE 8 -+#define EDMA_MAX_TRANSMIT_QUEUE 16 -+ -+/* WAN/LAN adapter number */ -+#define EDMA_WAN 0 -+#define EDMA_LAN 1 -+ -+/* VLAN tag */ -+#define EDMA_LAN_DEFAULT_VLAN 1 -+#define EDMA_WAN_DEFAULT_VLAN 2 -+ -+#define EDMA_DEFAULT_GROUP1_VLAN 1 -+#define EDMA_DEFAULT_GROUP2_VLAN 2 -+#define EDMA_DEFAULT_GROUP3_VLAN 3 -+#define EDMA_DEFAULT_GROUP4_VLAN 4 -+#define EDMA_DEFAULT_GROUP5_VLAN 5 -+ -+/* Queues exposed to linux kernel */ -+#define EDMA_NETDEV_TX_QUEUE 4 -+#define EDMA_NETDEV_RX_QUEUE 4 -+ -+/* Number of queues per core */ -+#define EDMA_NUM_TXQ_PER_CORE 4 -+#define EDMA_NUM_RXQ_PER_CORE 2 -+ -+#define EDMA_TPD_EOP_SHIFT 31 -+ -+#define EDMA_PORT_ID_SHIFT 12 -+#define EDMA_PORT_ID_MASK 0x7 -+ -+/* tpd word 3 bit 18-28 */ -+#define EDMA_TPD_PORT_BITMAP_SHIFT 18 -+ -+#define EDMA_TPD_FROM_CPU_SHIFT 25 -+ -+#define EDMA_FROM_CPU_MASK 0x80 -+#define EDMA_SKB_PRIORITY_MASK 0x38 -+ -+/* TX/RX descriptor ring count */ -+/* should be a power of 2 */ -+#define EDMA_RX_RING_SIZE 128 -+#define EDMA_TX_RING_SIZE 128 -+ -+/* Flags used in paged/non paged mode */ -+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256 -+#define EDMA_RX_HEAD_BUFF_SIZE 1540 -+ -+/* MAX frame size supported by switch */ -+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216 -+ -+/* Configurations */ -+#define EDMA_INTR_CLEAR_TYPE 0 -+#define EDMA_INTR_SW_IDX_W_TYPE 0 -+#define EDMA_FIFO_THRESH_TYPE 0 -+#define EDMA_RSS_TYPE 0 -+#define EDMA_RX_IMT 0x0020 -+#define EDMA_TX_IMT 0x0050 -+#define EDMA_TPD_BURST 5 -+#define EDMA_TXF_BURST 0x100 -+#define EDMA_RFD_BURST 8 -+#define EDMA_RFD_THR 16 -+#define EDMA_RFD_LTHR 0 -+ -+/* RX/TX per CPU based mask/shift */ -+#define EDMA_TX_PER_CPU_MASK 0xF -+#define EDMA_RX_PER_CPU_MASK 0x3 -+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2 -+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1 -+#define EDMA_TX_CPU_START_SHIFT 0x2 -+#define EDMA_RX_CPU_START_SHIFT 0x1 -+ -+/* FLags used in transmit direction */ -+#define EDMA_HW_CHECKSUM 0x00000001 -+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002 -+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004 -+ -+#define EDMA_SW_DESC_FLAG_LAST 0x1 -+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2 -+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4 -+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8 -+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10 -+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20 -+ -+ -+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1) -+ -+/* Ethtool specific list of EDMA supported features */ -+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \ -+ | SUPPORTED_10baseT_Full \ -+ | SUPPORTED_100baseT_Half \ -+ | SUPPORTED_100baseT_Full \ -+ | SUPPORTED_1000baseT_Full) -+ -+/* Recevie side atheros Header */ -+#define EDMA_RX_ATH_HDR_VERSION 0x2 -+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14 -+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11 -+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6 -+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4 -+ -+/* Transmit side atheros Header */ -+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F -+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80 -+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7 -+ -+#define EDMA_TXQ_START_CORE0 8 -+#define EDMA_TXQ_START_CORE1 12 -+#define EDMA_TXQ_START_CORE2 0 -+#define EDMA_TXQ_START_CORE3 4 -+ -+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00 -+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000 -+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F -+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0 -+ -+#define EDMA_ETH_HDR_LEN 12 -+#define EDMA_ETH_TYPE_MASK 0xFFFF -+ -+#define EDMA_RX_BUFFER_WRITE 16 -+#define EDMA_RFD_AVAIL_THR 80 -+ -+#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR -+ -+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst, -+ __be16 sport, __be16 dport, -+ uint8_t proto, u16 loadbalance, bool action); -+struct edma_ethtool_statistics { -+ u32 tx_q0_pkt; -+ u32 tx_q1_pkt; -+ u32 tx_q2_pkt; -+ u32 tx_q3_pkt; -+ u32 tx_q4_pkt; -+ u32 tx_q5_pkt; -+ u32 tx_q6_pkt; -+ u32 tx_q7_pkt; -+ u32 tx_q8_pkt; -+ u32 tx_q9_pkt; -+ u32 tx_q10_pkt; -+ u32 tx_q11_pkt; -+ u32 tx_q12_pkt; -+ u32 tx_q13_pkt; -+ u32 tx_q14_pkt; -+ u32 tx_q15_pkt; -+ u32 tx_q0_byte; -+ u32 tx_q1_byte; -+ u32 tx_q2_byte; -+ u32 tx_q3_byte; -+ u32 tx_q4_byte; -+ u32 tx_q5_byte; -+ u32 tx_q6_byte; -+ u32 tx_q7_byte; -+ u32 tx_q8_byte; -+ u32 tx_q9_byte; -+ u32 tx_q10_byte; -+ u32 tx_q11_byte; -+ u32 tx_q12_byte; -+ u32 tx_q13_byte; -+ u32 tx_q14_byte; -+ u32 tx_q15_byte; -+ u32 rx_q0_pkt; -+ u32 rx_q1_pkt; -+ u32 rx_q2_pkt; -+ u32 rx_q3_pkt; -+ u32 rx_q4_pkt; -+ u32 rx_q5_pkt; -+ u32 rx_q6_pkt; -+ u32 rx_q7_pkt; -+ u32 rx_q0_byte; -+ u32 rx_q1_byte; -+ u32 rx_q2_byte; -+ u32 rx_q3_byte; -+ u32 rx_q4_byte; -+ u32 rx_q5_byte; -+ u32 rx_q6_byte; -+ u32 rx_q7_byte; -+ u32 tx_desc_error; -+}; -+ -+struct edma_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ int phy_irq[PHY_MAX_ADDR]; -+}; -+ -+/* EDMA LINK state */ -+enum edma_link_state { -+ __EDMA_LINKUP, /* Indicate link is UP */ -+ __EDMA_LINKDOWN /* Indicate link is down */ -+}; -+ -+/* EDMA GMAC state */ -+enum edma_gmac_state { -+ __EDMA_UP /* use to indicate GMAC is up */ -+}; -+ -+/* edma transmit descriptor */ -+struct edma_tx_desc { -+ __le16 len; /* full packet including CRC */ -+ __le16 svlan_tag; /* vlan tag */ -+ __le32 word1; /* byte 4-7 */ -+ __le32 addr; /* address of buffer */ -+ __le32 word3; /* byte 12 */ -+}; -+ -+/* edma receive return descriptor */ -+struct edma_rx_return_desc { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+}; -+ -+/* RFD descriptor */ -+struct edma_rx_free_desc { -+ __le32 buffer_addr; /* buffer address */ -+}; -+ -+/* edma hw specific data */ -+struct edma_hw { -+ u32 __iomem *hw_addr; /* inner register address */ -+ struct edma_adapter *adapter; /* netdevice adapter */ -+ u32 rx_intr_mask; /*rx interrupt mask */ -+ u32 tx_intr_mask; /* tx interrupt nask */ -+ u32 misc_intr_mask; /* misc interrupt mask */ -+ u32 wol_intr_mask; /* wake on lan interrupt mask */ -+ bool intr_clear_type; /* interrupt clear */ -+ bool intr_sw_idx_w; /* interrupt software index */ -+ u32 rx_head_buff_size; /* Rx buffer size */ -+ u8 rss_type; /* rss protocol type */ -+}; -+ -+/* edma_sw_desc stores software descriptor -+ * SW descriptor has 1:1 map with HW descriptor -+ */ -+struct edma_sw_desc { -+ struct sk_buff *skb; -+ dma_addr_t dma; /* dma address */ -+ u16 length; /* Tx/Rx buffer length */ -+ u32 flags; -+}; -+ -+/* per core related information */ -+struct edma_per_cpu_queues_info { -+ struct napi_struct napi; /* napi associated with the core */ -+ u32 tx_mask; /* tx interrupt mask */ -+ u32 rx_mask; /* rx interrupt mask */ -+ u32 tx_status; /* tx interrupt status */ -+ u32 rx_status; /* rx interrupt status */ -+ u32 tx_start; /* tx queue start */ -+ u32 rx_start; /* rx queue start */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+}; -+ -+/* edma specific common info */ -+struct edma_common_info { -+ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */ -+ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */ -+ struct platform_device *pdev; /* device structure */ -+ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED]; -+ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX]; -+ struct ctl_table_header *edma_ctl_table_hdr; -+ int num_gmac; -+ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */ -+ int num_rx_queues; /* number of rx queue */ -+ u32 num_tx_queues; /* number of tx queue */ -+ u32 tx_irq[16]; /* number of tx irq */ -+ u32 rx_irq[8]; /* number of rx irq */ -+ u32 from_cpu; /* from CPU TPD field */ -+ u32 num_rxq_per_core; /* Rx queues per core */ -+ u32 num_txq_per_core; /* Tx queues per core */ -+ u16 tx_ring_count; /* Tx ring count */ -+ u16 rx_ring_count; /* Rx ring*/ -+ u16 rx_head_buffer_len; /* rx buffer length */ -+ u16 rx_page_buffer_len; /* rx buffer length */ -+ u32 page_mode; /* Jumbo frame supported flag */ -+ u32 fraglist_mode; /* fraglist supported flag */ -+ struct edma_hw hw; /* edma hw specific structure */ -+ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ -+ spinlock_t stats_lock; /* protect edma stats area for updation */ -+ struct timer_list edma_stats_timer; -+}; -+ -+/* transimit packet descriptor (tpd) ring */ -+struct edma_tx_desc_ring { -+ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */ -+ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE]; -+ /* Array of netdevs associated with the tpd ring */ -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ int netdev_bmp; /* Bitmap for per-ring netdevs */ -+ u32 size; /* descriptor ring length in bytes */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next Tx descriptor to fill */ -+ u16 sw_next_to_clean; /* next Tx descriptor to clean */ -+}; -+ -+/* receive free descriptor (rfd) ring */ -+struct edma_rfd_desc_ring { -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ u16 size; /* bytes allocated to sw_desc */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next descriptor to fill */ -+ u16 sw_next_to_clean; /* next descriptor to clean */ -+}; -+ -+/* edma_rfs_flter_node - rfs filter node in hash table */ -+struct edma_rfs_filter_node { -+ struct flow_keys keys; -+ u32 flow_id; /* flow_id of filter provided by kernel */ -+ u16 filter_id; /* filter id of filter returned by adaptor */ -+ u16 rq_id; /* desired rq index */ -+ struct hlist_node node; /* edma rfs list node */ -+}; -+ -+/* edma_rfs_flow_tbl - rfs flow table */ -+struct edma_rfs_flow_table { -+ u16 max_num_filter; /* Maximum number of filters edma supports */ -+ u16 hashtoclean; /* hash table index to clean next */ -+ int filter_available; /* Number of free filters available */ -+ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES]; -+ spinlock_t rfs_ftab_lock; -+ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */ -+}; -+ -+/* EDMA net device structure */ -+struct edma_adapter { -+ struct net_device *netdev; /* netdevice */ -+ struct platform_device *pdev; /* platform device */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+ struct phy_device *phydev; /* Phy device */ -+ struct edma_rfs_flow_table rfs; /* edma rfs flow table */ -+ struct net_device_stats stats; /* netdev statistics */ -+ set_rfs_filter_callback_t set_rfs_rule; -+ u32 flags;/* status flags */ -+ unsigned long state_flags; /* GMAC up/down flags */ -+ u32 forced_speed; /* link force speed */ -+ u32 forced_duplex; /* link force duplex */ -+ u32 link_state; /* phy link state */ -+ u32 phy_mdio_addr; /* PHY device address on MII interface */ -+ u32 poll_required; /* check if link polling is required */ -+ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */ -+ u32 default_vlan_tag; /* vlan tag */ -+ u32 dp_bitmap; -+ uint8_t phy_id[MII_BUS_ID_SIZE + 3]; -+}; -+ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo); -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo); -+int edma_open(struct net_device *netdev); -+int edma_close(struct net_device *netdev); -+void edma_free_tx_resources(struct edma_common_info *edma_c_info); -+void edma_free_rx_resources(struct edma_common_info *edma_c_info); -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo); -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_queues(struct edma_common_info *edma_cinfo); -+void edma_irq_disable(struct edma_common_info *edma_cinfo); -+int edma_reset(struct edma_common_info *edma_cinfo); -+int edma_poll(struct napi_struct *napi, int budget); -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *netdev); -+int edma_configure(struct edma_common_info *edma_cinfo); -+void edma_irq_enable(struct edma_common_info *edma_cinfo); -+void edma_enable_tx_ctrl(struct edma_hw *hw); -+void edma_enable_rx_ctrl(struct edma_hw *hw); -+void edma_stop_rx_tx(struct edma_hw *hw); -+void edma_free_irqs(struct edma_adapter *adapter); -+irqreturn_t edma_interrupt(int irq, void *dev); -+void edma_write_reg(u16 reg_addr, u32 reg_value); -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value); -+struct net_device_stats *edma_get_stats(struct net_device *netdev); -+int edma_set_mac_addr(struct net_device *netdev, void *p); -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id); -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter); -+void edma_flow_may_expire(struct timer_list *t); -+void edma_set_ethtool_ops(struct net_device *netdev); -+void edma_set_stp_rstp(bool tag); -+void edma_assign_ath_hdr_type(int tag); -+int edma_get_default_vlan_tag(struct net_device *netdev); -+void edma_adjust_link(struct net_device *netdev); -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id); -+void edma_read_append_stats(struct edma_common_info *edma_cinfo); -+void edma_change_tx_coalesce(int usecs); -+void edma_change_rx_coalesce(int usecs); -+void edma_get_tx_rx_coalesce(u32 *reg_val); -+void edma_clear_irq_status(void); -+#endif /* _EDMA_H_ */ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -@@ -0,0 +1,1216 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/cpu_rmap.h> -+#include <linux/of.h> -+#include <linux/of_net.h> -+#include <linux/timer.h> -+#include "edma.h" -+#include "ess_edma.h" -+ -+/* Weight round robin and virtual QID mask */ -+#define EDMA_WRR_VID_SCTL_MASK 0xffff -+ -+/* Weight round robin and virtual QID shift */ -+#define EDMA_WRR_VID_SCTL_SHIFT 16 -+ -+char edma_axi_driver_name[] = "ess_edma"; -+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | -+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; -+ -+static u32 edma_hw_addr; -+ -+char edma_tx_irq[16][64]; -+char edma_rx_irq[8][64]; -+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1, -+ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3}; -+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1, -+ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3}; -+ -+static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN; -+static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN; -+static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN; -+static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN; -+static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN; -+static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN; -+static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN; -+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE; -+static u32 edma_rss_idt_idx; -+ -+static int edma_weight_assigned_to_q __read_mostly; -+static int edma_queue_to_virtual_q __read_mostly; -+static bool edma_enable_rstp __read_mostly; -+static int edma_athr_hdr_eth_type __read_mostly; -+ -+static int page_mode; -+module_param(page_mode, int, 0); -+MODULE_PARM_DESC(page_mode, "enable page mode"); -+ -+static int overwrite_mode; -+module_param(overwrite_mode, int, 0); -+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting"); -+ -+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE; -+module_param(jumbo_mru, int, 0); -+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support"); -+ -+static int num_rxq = 4; -+module_param(num_rxq, int, 0); -+MODULE_PARM_DESC(num_rxq, "change the number of rx queues"); -+ -+void edma_write_reg(u16 reg_addr, u32 reg_value) -+{ -+ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr))); -+} -+ -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value) -+{ -+ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); -+} -+ -+/* edma_change_tx_coalesce() -+ * change tx interrupt moderation timer -+ */ -+void edma_change_tx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_change_rx_coalesce() -+ * change rx interrupt moderation timer -+ */ -+void edma_change_rx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_get_tx_rx_coalesce() -+ * Get tx/rx interrupt moderation value -+ */ -+void edma_get_tx_rx_coalesce(u32 *reg_val) -+{ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val); -+} -+ -+void edma_read_append_stats(struct edma_common_info *edma_cinfo) -+{ -+ uint32_t *p; -+ int i; -+ u32 stat; -+ -+ spin_lock_bh(&edma_cinfo->stats_lock); -+ p = (uint32_t *)&(edma_cinfo->edma_ethstats); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ spin_unlock_bh(&edma_cinfo->stats_lock); -+} -+ -+static void edma_statistics_timer(struct timer_list *t) -+{ -+ struct edma_common_info *edma_cinfo = -+ from_timer(edma_cinfo, t, edma_stats_timer); -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ); -+} -+ -+static int edma_enable_stp_rstp(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_set_stp_rstp(edma_enable_rstp); -+ -+ return ret; -+} -+ -+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type); -+ -+ return ret; -+} -+ -+static int edma_change_default_lan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for default_lan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_ltag; -+ -+ return ret; -+} -+ -+static int edma_change_default_wan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for default_wan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_wtag; -+ -+ return ret; -+} -+ -+static int edma_change_group1_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for Group 1 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group1_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group2_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for Group 2 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group2_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group3_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[2]) { -+ pr_err("Netdevice for Group 3 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[2]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group3_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group4_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[3]) { -+ pr_err("Netdevice for Group 4 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[3]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group4_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group5_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[4]) { -+ pr_err("Netdevice for Group 5 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[4]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group5_vtag; -+ -+ return ret; -+} -+ -+static int edma_set_rss_idt_value(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write && !ret) -+ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx), -+ edma_rss_idt_val); -+ return ret; -+} -+ -+static int edma_set_rss_idt_idx(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ u32 old_value = edma_rss_idt_idx; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (!write || ret) -+ return ret; -+ -+ if (edma_rss_idt_idx >= EDMA_NUM_IDT) { -+ pr_err("Invalid RSS indirection table index %d\n", -+ edma_rss_idt_idx); -+ edma_rss_idt_idx = old_value; -+ return -EINVAL; -+ } -+ return ret; -+} -+ -+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, weight; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT; -+ if (weight < 0 || weight > 0xF) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = weight << EDMA_WRR_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, virtual_qid; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ virtual_qid = edma_queue_to_virtual_q >> -+ EDMA_WRR_VID_SCTL_SHIFT; -+ if (virtual_qid < 0 || virtual_qid > 8) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static struct ctl_table edma_table[] = { -+ { -+ .procname = "default_lan_tag", -+ .data = &edma_default_ltag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_lan_vlan -+ }, -+ { -+ .procname = "default_wan_tag", -+ .data = &edma_default_wtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_wan_vlan -+ }, -+ { -+ .procname = "weight_assigned_to_queues", -+ .data = &edma_weight_assigned_to_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_weight_assigned_to_queues -+ }, -+ { -+ .procname = "queue_to_virtual_queue_map", -+ .data = &edma_queue_to_virtual_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_queue_to_virtual_queue_map -+ }, -+ { -+ .procname = "enable_stp_rstp", -+ .data = &edma_enable_rstp, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_enable_stp_rstp -+ }, -+ { -+ .procname = "athr_hdr_eth_type", -+ .data = &edma_athr_hdr_eth_type, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_ath_hdr_eth_type -+ }, -+ { -+ .procname = "default_group1_vlan_tag", -+ .data = &edma_default_group1_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group1_vtag -+ }, -+ { -+ .procname = "default_group2_vlan_tag", -+ .data = &edma_default_group2_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group2_vtag -+ }, -+ { -+ .procname = "default_group3_vlan_tag", -+ .data = &edma_default_group3_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group3_vtag -+ }, -+ { -+ .procname = "default_group4_vlan_tag", -+ .data = &edma_default_group4_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group4_vtag -+ }, -+ { -+ .procname = "default_group5_vlan_tag", -+ .data = &edma_default_group5_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group5_vtag -+ }, -+ { -+ .procname = "edma_rss_idt_value", -+ .data = &edma_rss_idt_val, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_value -+ }, -+ { -+ .procname = "edma_rss_idt_idx", -+ .data = &edma_rss_idt_idx, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_idx -+ }, -+ {} -+}; -+ -+/* edma_axi_netdev_ops -+ * Describe the operations supported by registered netdevices -+ * -+ * static const struct net_device_ops edma_axi_netdev_ops = { -+ * .ndo_open = edma_open, -+ * .ndo_stop = edma_close, -+ * .ndo_start_xmit = edma_xmit_frame, -+ * .ndo_set_mac_address = edma_set_mac_addr, -+ * } -+ */ -+static const struct net_device_ops edma_axi_netdev_ops = { -+ .ndo_open = edma_open, -+ .ndo_stop = edma_close, -+ .ndo_start_xmit = edma_xmit, -+ .ndo_set_mac_address = edma_set_mac_addr, -+#ifdef CONFIG_RFS_ACCEL -+ .ndo_rx_flow_steer = edma_rx_flow_steer, -+ .ndo_register_rfs_filter = edma_register_rfs_filter, -+ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag, -+#endif -+ .ndo_get_stats = edma_get_stats, -+}; -+ -+/* edma_axi_probe() -+ * Initialise an adapter identified by a platform_device structure. -+ * -+ * The OS initialization, configuring of the adapter private structure, -+ * and a hardware reset occur in the probe. -+ */ -+static int edma_axi_probe(struct platform_device *pdev) -+{ -+ struct edma_common_info *edma_cinfo; -+ struct edma_hw *hw; -+ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED]; -+ struct resource *res; -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *pnp; -+ struct device_node *mdio_node = NULL; -+ struct platform_device *mdio_plat = NULL; -+ struct mii_bus *miibus = NULL; -+ struct edma_mdio_data *mdio_data = NULL; -+ int i, j, k, err = 0; -+ int portid_bmp; -+ int idx = 0, idx_mac = 0; -+ -+ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) { -+ dev_err(&pdev->dev, "Invalid CPU Cores\n"); -+ return -EINVAL; -+ } -+ -+ if ((num_rxq != 4) && (num_rxq != 8)) { -+ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n"); -+ return -EINVAL; -+ } -+ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL); -+ if (!edma_cinfo) { -+ err = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ edma_cinfo->pdev = pdev; -+ -+ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac); -+ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) { -+ pr_err("Invalid DTSI Entry for qcom,num_gmac\n"); -+ err = -EINVAL; -+ goto err_cinfo; -+ } -+ -+ /* Initialize the netdev array before allocation -+ * to avoid double free -+ */ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) -+ edma_netdev[i] = NULL; -+ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) { -+ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter), -+ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE); -+ -+ if (!edma_netdev[i]) { -+ dev_err(&pdev->dev, -+ "net device alloc fails for index=%d\n", i); -+ err = -ENODEV; -+ goto err_ioremap; -+ } -+ -+ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev); -+ platform_set_drvdata(pdev, edma_netdev[i]); -+ edma_cinfo->netdev[i] = edma_netdev[i]; -+ } -+ -+ /* Fill ring details */ -+ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE; -+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4); -+ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE; -+ -+ /* Update num rx queues based on module parameter */ -+ edma_cinfo->num_rx_queues = num_rxq; -+ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2); -+ -+ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE; -+ -+ hw = &edma_cinfo->hw; -+ -+ /* Fill HW defaults */ -+ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK; -+ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK; -+ -+ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode); -+ of_property_read_u32(np, "qcom,rx_head_buf_size", -+ &hw->rx_head_buff_size); -+ -+ if (overwrite_mode) { -+ dev_info(&pdev->dev, "page mode overwritten"); -+ edma_cinfo->page_mode = page_mode; -+ } -+ -+ if (jumbo_mru) -+ edma_cinfo->fraglist_mode = 1; -+ -+ if (edma_cinfo->page_mode) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO; -+ else if (edma_cinfo->fraglist_mode) -+ hw->rx_head_buff_size = jumbo_mru; -+ else if (!hw->rx_head_buff_size) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE; -+ -+ hw->misc_intr_mask = 0; -+ hw->wol_intr_mask = 0; -+ -+ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE; -+ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE; -+ -+ /* configure RSS type to the different protocol that can be -+ * supported -+ */ -+ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP | -+ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP | -+ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(edma_cinfo->hw.hw_addr)) { -+ err = PTR_ERR(edma_cinfo->hw.hw_addr); -+ goto err_ioremap; -+ } -+ -+ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr; -+ -+ /* Parse tx queue interrupt number from device tree */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i); -+ -+ /* Parse rx queue interrupt number from device tree -+ * Here we are setting j to point to the point where we -+ * left tx interrupt parsing(i.e 16) and run run the loop -+ * from 0 to 7 to parse rx interrupt number. -+ */ -+ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0; -+ i < edma_cinfo->num_rx_queues; i++) { -+ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j); -+ k += ((num_rxq == 4) ? 2 : 1); -+ j += ((num_rxq == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size; -+ edma_cinfo->rx_page_buffer_len = PAGE_SIZE; -+ -+ err = edma_alloc_queues_tx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX queue failed\n"); -+ goto err_tx_qinit; -+ } -+ -+ err = edma_alloc_queues_rx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX queue failed\n"); -+ goto err_rx_qinit; -+ } -+ -+ err = edma_alloc_tx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX resources failed\n"); -+ goto err_tx_rinit; -+ } -+ -+ err = edma_alloc_rx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX resources failed\n"); -+ goto err_rx_rinit; -+ } -+ -+ /* Initialize netdev and netdev bitmap for transmit descriptor rings */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i]; -+ int j; -+ -+ etdr->netdev_bmp = 0; -+ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) { -+ etdr->netdev[j] = NULL; -+ etdr->nq[j] = NULL; -+ } -+ } -+ -+ if (of_property_read_bool(np, "qcom,mdio_supported")) { -+ mdio_node = of_find_compatible_node(NULL, NULL, -+ "qcom,ipq4019-mdio"); -+ if (!mdio_node) { -+ dev_err(&pdev->dev, "cannot find mdio node by phandle"); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_plat = of_find_device_by_node(mdio_node); -+ if (!mdio_plat) { -+ dev_err(&pdev->dev, -+ "cannot find platform device from mdio node"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_data = dev_get_drvdata(&mdio_plat->dev); -+ if (!mdio_data) { -+ dev_err(&pdev->dev, -+ "cannot get mii bus reference from device data"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ miibus = mdio_data->mii_bus; -+ } -+ -+ for_each_available_child_of_node(np, pnp) { -+ const char *mac_addr; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx_mac == edma_cinfo->num_gmac) { -+ of_node_put(np); -+ break; -+ } -+ -+ mac_addr = of_get_mac_address(pnp); -+ if (mac_addr) -+ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN); -+ -+ idx_mac++; -+ } -+ -+ /* Populate the adapter structure register the netdevice */ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ int k, m; -+ -+ adapter[i] = netdev_priv(edma_netdev[i]); -+ adapter[i]->netdev = edma_netdev[i]; -+ adapter[i]->pdev = pdev; -+ for (j = 0; j < CONFIG_NR_CPUS; j++) { -+ m = i % 2; -+ adapter[i]->tx_start_offset[j] = -+ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1)); -+ /* Share the queues with available net-devices. -+ * For instance , with 5 net-devices -+ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13 -+ * and eth1/eth3 will get the remaining. -+ */ -+ for (k = adapter[i]->tx_start_offset[j]; k < -+ (adapter[i]->tx_start_offset[j] + 2); k++) { -+ if (edma_fill_netdev(edma_cinfo, k, i, j)) { -+ pr_err("Netdev overflow Error\n"); -+ goto err_register; -+ } -+ } -+ } -+ -+ adapter[i]->edma_cinfo = edma_cinfo; -+ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops; -+ edma_netdev[i]->max_mtu = 9000; -+ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM -+ | NETIF_F_HW_VLAN_CTAG_TX -+ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO; -+ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | -+ NETIF_F_HW_VLAN_CTAG_RX -+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+#endif -+ edma_set_ethtool_ops(edma_netdev[i]); -+ -+ /* This just fill in some default MAC address -+ */ -+ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) { -+ random_ether_addr(edma_netdev[i]->dev_addr); -+ pr_info("EDMA using MAC@ - using"); -+ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n", -+ *(edma_netdev[i]->dev_addr), -+ *(edma_netdev[i]->dev_addr + 1), -+ *(edma_netdev[i]->dev_addr + 2), -+ *(edma_netdev[i]->dev_addr + 3), -+ *(edma_netdev[i]->dev_addr + 4), -+ *(edma_netdev[i]->dev_addr + 5)); -+ } -+ -+ err = register_netdev(edma_netdev[i]); -+ if (err) -+ goto err_register; -+ -+ /* carrier off reporting is important to -+ * ethtool even BEFORE open -+ */ -+ netif_carrier_off(edma_netdev[i]); -+ -+ /* Allocate reverse irq cpu mapping structure for -+ * receive queues -+ */ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->rx_cpu_rmap = -+ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE); -+ if (!edma_netdev[i]->rx_cpu_rmap) { -+ err = -ENOMEM; -+ goto err_rmap_alloc_fail; -+ } -+#endif -+ } -+ -+ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++) -+ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL; -+ -+ for_each_available_child_of_node(np, pnp) { -+ const uint32_t *vlan_tag = NULL; -+ int len; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx == edma_cinfo->num_gmac) -+ break; -+ -+ /* Populate port-id to netdev lookup table */ -+ vlan_tag = of_get_property(pnp, "vlan_tag", &len); -+ if (!vlan_tag) { -+ pr_err("Vlan tag parsing Failed.\n"); -+ goto err_rmap_alloc_fail; -+ } -+ -+ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1); -+ vlan_tag++; -+ portid_bmp = of_read_number(vlan_tag, 1); -+ adapter[idx]->dp_bitmap = portid_bmp; -+ -+ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */ -+ while (portid_bmp) { -+ int port_bit = ffs(portid_bmp); -+ -+ if (port_bit > EDMA_MAX_PORTID_SUPPORTED) -+ goto err_rmap_alloc_fail; -+ edma_cinfo->portid_netdev_lookup_tbl[port_bit] = -+ edma_netdev[idx]; -+ portid_bmp &= ~(1 << (port_bit - 1)); -+ } -+ -+ if (!of_property_read_u32(pnp, "qcom,poll_required", -+ &adapter[idx]->poll_required)) { -+ if (adapter[idx]->poll_required) { -+ of_property_read_u32(pnp, "qcom,phy_mdio_addr", -+ &adapter[idx]->phy_mdio_addr); -+ of_property_read_u32(pnp, "qcom,forced_speed", -+ &adapter[idx]->forced_speed); -+ of_property_read_u32(pnp, "qcom,forced_duplex", -+ &adapter[idx]->forced_duplex); -+ -+ /* create a phyid using MDIO bus id -+ * and MDIO bus address -+ */ -+ snprintf(adapter[idx]->phy_id, -+ MII_BUS_ID_SIZE + 3, PHY_ID_FMT, -+ miibus->id, -+ adapter[idx]->phy_mdio_addr); -+ } -+ } else { -+ adapter[idx]->poll_required = 0; -+ adapter[idx]->forced_speed = SPEED_1000; -+ adapter[idx]->forced_duplex = DUPLEX_FULL; -+ } -+ -+ idx++; -+ } -+ -+ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net, -+ "net/edma", -+ edma_table); -+ if (!edma_cinfo->edma_ctl_table_hdr) { -+ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n"); -+ goto err_unregister_sysctl_tbl; -+ } -+ -+ /* Disable all 16 Tx and 8 rx irqs */ -+ edma_irq_disable(edma_cinfo); -+ -+ err = edma_reset(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_reset; -+ } -+ -+ /* populate per_core_info, do a napi_Add, request 16 TX irqs, -+ * 8 RX irqs, do a napi enable -+ */ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ u8 rx_start; -+ -+ edma_cinfo->edma_percpu_info[i].napi.state = 0; -+ -+ netif_napi_add(edma_netdev[0], -+ &edma_cinfo->edma_percpu_info[i].napi, -+ edma_poll, 64); -+ napi_enable(&edma_cinfo->edma_percpu_info[i].napi); -+ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i]; -+ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK -+ << (i << EDMA_RX_PER_CPU_MASK_SHIFT); -+ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i]; -+ edma_cinfo->edma_percpu_info[i].rx_start = -+ i << EDMA_RX_CPU_START_SHIFT; -+ rx_start = i << EDMA_RX_CPU_START_SHIFT; -+ edma_cinfo->edma_percpu_info[i].tx_status = 0; -+ edma_cinfo->edma_percpu_info[i].rx_status = 0; -+ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo; -+ -+ /* Request irq per core */ -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; -+ j < tx_start[i] + 4; j++) { -+ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j); -+ err = request_irq(edma_cinfo->tx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_tx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < (rx_start + -+ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2)); -+ j++) { -+ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j); -+ err = request_irq(edma_cinfo->rx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_rx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+#ifdef CONFIG_RFS_ACCEL -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < rx_start + 2; j += 2) { -+ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap, -+ edma_cinfo->rx_irq[j]); -+ if (err) -+ goto err_rmap_add_fail; -+ } -+#endif -+ } -+ -+ /* Used to clear interrupt status, allocate rx buffer, -+ * configure edma descriptors registers -+ */ -+ err = edma_configure(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_configure; -+ } -+ -+ /* Configure RSS indirection table. -+ * 128 hash will be configured in the following -+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively -+ * and so on -+ */ -+ for (i = 0; i < EDMA_NUM_IDT; i++) -+ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE); -+ -+ /* Configure load balance mapping table. -+ * 4 table entry will be configured according to the -+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} -+ * respectively. -+ */ -+ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE); -+ -+ /* Configure Virtual queue for Tx rings -+ * User can also change this value runtime through -+ * a sysctl -+ */ -+ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE); -+ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE); -+ -+ /* Configure Max AXI Burst write size to 128 bytes*/ -+ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE, -+ EDMA_AXIW_MAXWRSIZE_VALUE); -+ -+ /* Enable All 16 tx and 8 rx irq mask */ -+ edma_irq_enable(edma_cinfo); -+ edma_enable_tx_ctrl(&edma_cinfo->hw); -+ edma_enable_rx_ctrl(&edma_cinfo->hw); -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (adapter[i]->poll_required) { -+ adapter[i]->phydev = -+ phy_connect(edma_netdev[i], -+ (const char *)adapter[i]->phy_id, -+ &edma_adjust_link, -+ PHY_INTERFACE_MODE_SGMII); -+ if (IS_ERR(adapter[i]->phydev)) { -+ dev_dbg(&pdev->dev, "PHY attach FAIL"); -+ err = -EIO; -+ goto edma_phy_attach_fail; -+ } else { -+ adapter[i]->phydev->advertising |= -+ ADVERTISED_Pause | -+ ADVERTISED_Asym_Pause; -+ adapter[i]->phydev->supported |= -+ SUPPORTED_Pause | -+ SUPPORTED_Asym_Pause; -+ } -+ } else { -+ adapter[i]->phydev = NULL; -+ } -+ } -+ -+ spin_lock_init(&edma_cinfo->stats_lock); -+ -+ timer_setup(&edma_cinfo->edma_stats_timer, edma_statistics_timer, 0); -+ mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ); -+ -+ return 0; -+ -+edma_phy_attach_fail: -+ miibus = NULL; -+err_configure: -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap); -+ adapter[i]->netdev->rx_cpu_rmap = NULL; -+ } -+#endif -+err_rmap_add_fail: -+ edma_free_irqs(adapter[0]); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+err_reset: -+err_unregister_sysctl_tbl: -+err_rmap_alloc_fail: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+err_register: -+err_mdiobus_init_fail: -+ edma_free_rx_rings(edma_cinfo); -+err_rx_rinit: -+ edma_free_tx_rings(edma_cinfo); -+err_tx_rinit: -+ edma_free_queues(edma_cinfo); -+err_rx_qinit: -+err_tx_qinit: -+ iounmap(edma_cinfo->hw.hw_addr); -+err_ioremap: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (edma_netdev[i]) -+ free_netdev(edma_netdev[i]); -+ } -+err_cinfo: -+ kfree(edma_cinfo); -+err_alloc: -+ return err; -+} -+ -+/* edma_axi_remove() -+ * Device Removal Routine -+ * -+ * edma_axi_remove is called by the platform subsystem to alert the driver -+ * that it should release a platform device. -+ */ -+static int edma_axi_remove(struct platform_device *pdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+ -+ edma_stop_rx_tx(hw); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+ -+ edma_irq_disable(edma_cinfo); -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap); -+ edma_netdev[i]->rx_cpu_rmap = NULL; -+ } -+#endif -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]); -+ -+ if (adapter->phydev) -+ phy_disconnect(adapter->phydev); -+ } -+ -+ del_timer_sync(&edma_cinfo->edma_stats_timer); -+ edma_free_irqs(adapter); -+ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); -+ edma_free_tx_resources(edma_cinfo); -+ edma_free_rx_resources(edma_cinfo); -+ edma_free_tx_rings(edma_cinfo); -+ edma_free_rx_rings(edma_cinfo); -+ edma_free_queues(edma_cinfo); -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ free_netdev(edma_netdev[i]); -+ -+ kfree(edma_cinfo); -+ -+ return 0; -+} -+ -+static const struct of_device_id edma_of_mtable[] = { -+ {.compatible = "qcom,ess-edma" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, edma_of_mtable); -+ -+static struct platform_driver edma_axi_driver = { -+ .driver = { -+ .name = edma_axi_driver_name, -+ .of_match_table = edma_of_mtable, -+ }, -+ .probe = edma_axi_probe, -+ .remove = edma_axi_remove, -+}; -+ -+module_platform_driver(edma_axi_driver); -+ -+MODULE_AUTHOR("Qualcomm Atheros Inc"); -+MODULE_DESCRIPTION("QCA ESS EDMA driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -@@ -0,0 +1,374 @@ -+/* -+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/ethtool.h> -+#include <linux/netdevice.h> -+#include <linux/string.h> -+#include "edma.h" -+ -+struct edma_ethtool_stats { -+ uint8_t stat_string[ETH_GSTRING_LEN]; -+ uint32_t stat_offset; -+}; -+ -+#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m) -+#define DRVINFO_LEN 32 -+ -+/* Array of strings describing statistics -+ */ -+static const struct edma_ethtool_stats edma_gstrings_stats[] = { -+ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)}, -+ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)}, -+ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)}, -+ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)}, -+ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)}, -+ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)}, -+ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)}, -+ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)}, -+ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)}, -+ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)}, -+ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)}, -+ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)}, -+ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)}, -+ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)}, -+ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)}, -+ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)}, -+ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)}, -+ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)}, -+ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)}, -+ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)}, -+ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)}, -+ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)}, -+ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)}, -+ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)}, -+ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)}, -+ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)}, -+ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)}, -+ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)}, -+ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)}, -+ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)}, -+ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)}, -+ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)}, -+ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)}, -+ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)}, -+ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)}, -+ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)}, -+ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)}, -+ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)}, -+ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)}, -+ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)}, -+ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)}, -+ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)}, -+ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)}, -+ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)}, -+ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)}, -+ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)}, -+ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, -+ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, -+ {"tx_desc_error", EDMA_STAT(tx_desc_error)}, -+}; -+ -+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) -+ -+/* edma_get_strset_count() -+ * Get strset count -+ */ -+static int edma_get_strset_count(struct net_device *netdev, -+ int sset) -+{ -+ switch (sset) { -+ case ETH_SS_STATS: -+ return EDMA_STATS_LEN; -+ default: -+ netdev_dbg(netdev, "%s: Invalid string set", __func__); -+ return -EOPNOTSUPP; -+ } -+} -+ -+ -+/* edma_get_strings() -+ * get stats string -+ */ -+static void edma_get_strings(struct net_device *netdev, uint32_t stringset, -+ uint8_t *data) -+{ -+ uint8_t *p = data; -+ uint32_t i; -+ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ for (i = 0; i < EDMA_STATS_LEN; i++) { -+ memcpy(p, edma_gstrings_stats[i].stat_string, -+ min((size_t)ETH_GSTRING_LEN, -+ strlen(edma_gstrings_stats[i].stat_string) -+ + 1)); -+ p += ETH_GSTRING_LEN; -+ } -+ break; -+ } -+} -+ -+/* edma_get_ethtool_stats() -+ * Get ethtool statistics -+ */ -+static void edma_get_ethtool_stats(struct net_device *netdev, -+ struct ethtool_stats *stats, uint64_t *data) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i; -+ uint8_t *p = NULL; -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ for(i = 0; i < EDMA_STATS_LEN; i++) { -+ p = (uint8_t *)&(edma_cinfo->edma_ethstats) + -+ edma_gstrings_stats[i].stat_offset; -+ data[i] = *(uint32_t *)p; -+ } -+} -+ -+/* edma_get_drvinfo() -+ * get edma driver info -+ */ -+static void edma_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ strlcpy(info->driver, "ess_edma", DRVINFO_LEN); -+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); -+} -+ -+/* edma_nway_reset() -+ * Reset the phy, if available. -+ */ -+static int edma_nway_reset(struct net_device *netdev) -+{ -+ return -EINVAL; -+} -+ -+/* edma_get_wol() -+ * get wake on lan info -+ */ -+static void edma_get_wol(struct net_device *netdev, -+ struct ethtool_wolinfo *wol) -+{ -+ wol->supported = 0; -+ wol->wolopts = 0; -+} -+ -+/* edma_get_msglevel() -+ * get message level. -+ */ -+static uint32_t edma_get_msglevel(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_settings() -+ * Get edma settings -+ */ -+static int edma_get_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->poll_required) { -+ struct phy_device *phydev = NULL; -+ uint16_t phyreg; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) -+ && !(adapter->poll_required)) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ -+ ecmd->advertising = phydev->advertising; -+ ecmd->autoneg = phydev->autoneg; -+ -+ if (adapter->link_state == __EDMA_LINKDOWN) { -+ ecmd->speed = SPEED_UNKNOWN; -+ ecmd->duplex = DUPLEX_UNKNOWN; -+ } else { -+ ecmd->speed = phydev->speed; -+ ecmd->duplex = phydev->duplex; -+ } -+ -+ ecmd->phy_address = adapter->phy_mdio_addr; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA); -+ if (phyreg & LPA_10HALF) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Half; -+ -+ if (phyreg & LPA_10FULL) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Full; -+ -+ if (phyreg & LPA_100HALF) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Half; -+ -+ if (phyreg & LPA_100FULL) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Full; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000); -+ if (phyreg & LPA_1000HALF) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half; -+ -+ if (phyreg & LPA_1000FULL) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full; -+ } else { -+ /* If the speed/duplex for this GMAC is forced and we -+ * are not polling for link state changes, return the -+ * values as specified by platform. This will be true -+ * for GMACs connected to switch, and interfaces that -+ * do not use a PHY. -+ */ -+ if (!(adapter->poll_required)) { -+ if (adapter->forced_speed != SPEED_UNKNOWN) { -+ /* set speed and duplex */ -+ ethtool_cmd_speed_set(ecmd, SPEED_1000); -+ ecmd->duplex = DUPLEX_FULL; -+ -+ /* Populate capabilities advertised by self */ -+ ecmd->advertising = 0; -+ ecmd->autoneg = 0; -+ ecmd->port = PORT_TP; -+ ecmd->transceiver = XCVR_EXTERNAL; -+ } else { -+ /* non link polled and non -+ * forced speed/duplex interface -+ */ -+ return -EIO; -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_set_settings() -+ * Set EDMA settings -+ */ -+static int edma_set_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = NULL; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) && -+ !adapter->poll_required) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ phydev->advertising = ecmd->advertising; -+ phydev->autoneg = ecmd->autoneg; -+ phydev->speed = ethtool_cmd_speed(ecmd); -+ phydev->duplex = ecmd->duplex; -+ -+ genphy_config_aneg(phydev); -+ -+ return 0; -+} -+ -+/* edma_get_coalesce -+ * get interrupt mitigation -+ */ -+static int edma_get_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ u32 reg_val; -+ -+ edma_get_tx_rx_coalesce(®_val); -+ -+ /* We read the Interrupt Moderation Timer(IMT) register value, -+ * use lower 16 bit for rx and higher 16 bit for Tx. We do a -+ * left shift by 1, because IMT resolution timer is 2usecs. -+ * Hence the value given by the register is multiplied by 2 to -+ * get the actual time in usecs. -+ */ -+ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1); -+ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1); -+ -+ return 0; -+} -+ -+/* edma_set_coalesce -+ * set interrupt mitigation -+ */ -+static int edma_set_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ if (ec->tx_coalesce_usecs) -+ edma_change_tx_coalesce(ec->tx_coalesce_usecs); -+ if (ec->rx_coalesce_usecs) -+ edma_change_rx_coalesce(ec->rx_coalesce_usecs); -+ -+ return 0; -+} -+ -+/* edma_set_priv_flags() -+ * Set EDMA private flags -+ */ -+static int edma_set_priv_flags(struct net_device *netdev, u32 flags) -+{ -+ return 0; -+} -+ -+/* edma_get_priv_flags() -+ * get edma driver flags -+ */ -+static u32 edma_get_priv_flags(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_ringparam() -+ * get ring size -+ */ -+static void edma_get_ringparam(struct net_device *netdev, -+ struct ethtool_ringparam *ring) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ -+ ring->tx_max_pending = edma_cinfo->tx_ring_count; -+ ring->rx_max_pending = edma_cinfo->rx_ring_count; -+} -+ -+/* Ethtool operations -+ */ -+static const struct ethtool_ops edma_ethtool_ops = { -+ .get_drvinfo = &edma_get_drvinfo, -+ .get_link = ðtool_op_get_link, -+ .get_msglevel = &edma_get_msglevel, -+ .nway_reset = &edma_nway_reset, -+ .get_wol = &edma_get_wol, -+ .get_settings = &edma_get_settings, -+ .set_settings = &edma_set_settings, -+ .get_strings = &edma_get_strings, -+ .get_sset_count = &edma_get_strset_count, -+ .get_ethtool_stats = &edma_get_ethtool_stats, -+ .get_coalesce = &edma_get_coalesce, -+ .set_coalesce = &edma_set_coalesce, -+ .get_priv_flags = edma_get_priv_flags, -+ .set_priv_flags = edma_set_priv_flags, -+ .get_ringparam = edma_get_ringparam, -+}; -+ -+/* edma_set_ethtool_ops -+ * Set ethtool operations -+ */ -+void edma_set_ethtool_ops(struct net_device *netdev) -+{ -+ netdev->ethtool_ops = &edma_ethtool_ops; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -@@ -0,0 +1,332 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _ESS_EDMA_H_ -+#define _ESS_EDMA_H_ -+ -+#include <linux/types.h> -+ -+struct edma_adapter; -+struct edma_hw; -+ -+/* register definition */ -+#define EDMA_REG_MAS_CTRL 0x0 -+#define EDMA_REG_TIMEOUT_CTRL 0x004 -+#define EDMA_REG_DBG0 0x008 -+#define EDMA_REG_DBG1 0x00C -+#define EDMA_REG_SW_CTRL0 0x100 -+#define EDMA_REG_SW_CTRL1 0x104 -+ -+/* Interrupt Status Register */ -+#define EDMA_REG_RX_ISR 0x200 -+#define EDMA_REG_TX_ISR 0x208 -+#define EDMA_REG_MISC_ISR 0x210 -+#define EDMA_REG_WOL_ISR 0x218 -+ -+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x) -+ -+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100 -+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200 -+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400 -+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800 -+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000 -+ -+#define EDMA_WOL_ISR 0x00000001 -+ -+/* Interrupt Mask Register */ -+#define EDMA_REG_MISC_IMR 0x214 -+#define EDMA_REG_WOL_IMR 0x218 -+ -+#define EDMA_RX_IMR_NORMAL_MASK 0x1 -+#define EDMA_TX_IMR_NORMAL_MASK 0x1 -+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF -+#define EDMA_WOL_IMR_NORMAL_MASK 0x1 -+ -+/* Edma receive consumer index */ -+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ -+/* Edma transmit consumer index */ -+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ -+ -+/* IRQ Moderator Initial Timer Register */ -+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280 -+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF -+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0 -+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16 -+ -+/* Interrupt Control Register */ -+#define EDMA_REG_INTR_CTRL 0x284 -+#define EDMA_INTR_CLR_TYP_SHIFT 0 -+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1 -+#define EDMA_INTR_CLEAR_TYPE_W1 0 -+#define EDMA_INTR_CLEAR_TYPE_R 1 -+ -+/* RX Interrupt Mask Register */ -+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ -+ -+/* TX Interrupt mask register */ -+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ -+ -+/* Load Ptr Register -+ * Software sets this bit after the initialization of the head and tail -+ */ -+#define EDMA_REG_TX_SRAM_PART 0x400 -+#define EDMA_LOAD_PTR_SHIFT 16 -+ -+/* TXQ Control Register */ -+#define EDMA_REG_TXQ_CTRL 0x404 -+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10 -+#define EDMA_TXQ_CTRL_TXQ_EN 0x20 -+#define EDMA_TXQ_CTRL_ENH_MODE 0x40 -+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80 -+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100 -+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200 -+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF -+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF -+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0 -+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16 -+ -+#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ -+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF -+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0 -+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16 -+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000 -+ -+/* WRR Control Register */ -+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c -+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410 -+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414 -+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418 -+ -+/* Weight round robin(WRR), it takes queue as input, and computes -+ * starting bits where we need to write the weight for a particular -+ * queue -+ */ -+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20) -+ -+/* Tx Descriptor Control Register */ -+#define EDMA_REG_TPD_RING_SIZE 0x41C -+#define EDMA_TPD_RING_SIZE_SHIFT 0 -+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF -+ -+/* Transmit descriptor base address */ -+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ -+ -+/* TPD Index Register */ -+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ -+ -+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF -+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000 -+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF -+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF -+#define EDMA_TPD_PROD_IDX_SHIFT 0 -+#define EDMA_TPD_CONS_IDX_SHIFT 16 -+ -+/* TX Virtual Queue Mapping Control Register */ -+#define EDMA_REG_VQ_CTRL0 0x4A0 -+#define EDMA_REG_VQ_CTRL1 0x4A4 -+ -+/* Virtual QID shift, it takes queue as input, and computes -+ * Virtual QID position in virtual qid control register -+ */ -+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24) -+ -+/* Virtual Queue Default Value */ -+#define EDMA_VQ_REG_VALUE 0x240240 -+ -+/* Tx side Port Interface Control Register */ -+#define EDMA_REG_PORT_CTRL 0x4A8 -+#define EDMA_PAD_EN_SHIFT 15 -+ -+/* Tx side VLAN Configuration Register */ -+#define EDMA_REG_VLAN_CFG 0x4AC -+ -+#define EDMA_TX_CVLAN 16 -+#define EDMA_TX_INS_CVLAN 17 -+#define EDMA_TX_CVLAN_TAG_SHIFT 0 -+ -+#define EDMA_TX_SVLAN 14 -+#define EDMA_TX_INS_SVLAN 15 -+#define EDMA_TX_SVLAN_TAG_SHIFT 16 -+ -+/* Tx Queue Packet Statistic Register */ -+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ -+ -+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF -+ -+/* Tx Queue Byte Statistic Register */ -+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ -+ -+/* Load Balance Based Ring Offset Register */ -+#define EDMA_REG_LB_RING 0x800 -+#define EDMA_LB_RING_ENTRY_MASK 0xff -+#define EDMA_LB_RING_ID_MASK 0x7 -+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3 -+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8 -+#define EDMA_LB_RING_ID_OFFSET 0 -+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3 -+#define EDMA_LB_REG_VALUE 0x6040200 -+ -+/* Load Balance Priority Mapping Register */ -+#define EDMA_REG_LB_PRI_START 0x804 -+#define EDMA_REG_LB_PRI_END 0x810 -+#define EDMA_LB_PRI_REG_INC 4 -+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4 -+#define EDMA_LB_PRI_ENTRY_MASK 0xf -+ -+/* RSS Priority Mapping Register */ -+#define EDMA_REG_RSS_PRI 0x820 -+#define EDMA_RSS_PRI_ENTRY_MASK 0xf -+#define EDMA_RSS_RING_ID_MASK 0x7 -+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4 -+ -+/* RSS Indirection Register */ -+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ -+#define EDMA_NUM_IDT 16 -+#define EDMA_RSS_IDT_VALUE 0x64206420 -+ -+/* Default RSS Ring Register */ -+#define EDMA_REG_DEF_RSS 0x890 -+#define EDMA_DEF_RSS_MASK 0x7 -+ -+/* RSS Hash Function Type Register */ -+#define EDMA_REG_RSS_TYPE 0x894 -+#define EDMA_RSS_TYPE_NONE 0x01 -+#define EDMA_RSS_TYPE_IPV4TCP 0x02 -+#define EDMA_RSS_TYPE_IPV6_TCP 0x04 -+#define EDMA_RSS_TYPE_IPV4_UDP 0x08 -+#define EDMA_RSS_TYPE_IPV6UDP 0x10 -+#define EDMA_RSS_TYPE_IPV4 0x20 -+#define EDMA_RSS_TYPE_IPV6 0x40 -+#define EDMA_RSS_HASH_MODE_MASK 0x7f -+ -+#define EDMA_REG_RSS_HASH_VALUE 0x8C0 -+ -+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4 -+ -+#define EDMA_HASH_TYPE_START 0 -+#define EDMA_HASH_TYPE_END 5 -+#define EDMA_HASH_TYPE_SHIFT 12 -+ -+#define EDMA_RFS_FLOW_ENTRIES 1024 -+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1) -+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128 -+ -+/* RFD Base Address Register */ -+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ -+ -+/* RFD Index Register */ -+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) -+ -+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF -+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000 -+#define EDMA_RFD_PROD_IDX_MASK 0xFFF -+#define EDMA_RFD_CONS_IDX_MASK 0xFFF -+#define EDMA_RFD_PROD_IDX_SHIFT 0 -+#define EDMA_RFD_CONS_IDX_SHIFT 16 -+ -+/* Rx Descriptor Control Register */ -+#define EDMA_REG_RX_DESC0 0xA10 -+#define EDMA_RFD_RING_SIZE_MASK 0xFFF -+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF -+#define EDMA_RFD_RING_SIZE_SHIFT 0 -+#define EDMA_RX_BUF_SIZE_SHIFT 16 -+ -+#define EDMA_REG_RX_DESC1 0xA14 -+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F -+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F -+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF -+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0 -+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8 -+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16 -+ -+/* RXQ Control Register */ -+#define EDMA_REG_RXQ_CTRL 0xA18 -+#define EDMA_FIFO_THRESH_TYPE_SHIF 0 -+#define EDMA_FIFO_THRESH_128_BYTE 0x0 -+#define EDMA_FIFO_THRESH_64_BYTE 0x1 -+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002 -+#define EDMA_RXQ_CTRL_EN 0x0000FF00 -+ -+/* AXI Burst Size Config */ -+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C -+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0 -+ -+/* Rx Statistics Register */ -+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ -+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ -+ -+/* WoL Pattern Length Register */ -+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00 -+#define EDMA_WOL_PT_LEN_MASK 0xFF -+#define EDMA_WOL_PT0_LEN_SHIFT 0 -+#define EDMA_WOL_PT1_LEN_SHIFT 8 -+#define EDMA_WOL_PT2_LEN_SHIFT 16 -+#define EDMA_WOL_PT3_LEN_SHIFT 24 -+ -+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04 -+#define EDMA_WOL_PT4_LEN_SHIFT 0 -+#define EDMA_WOL_PT5_LEN_SHIFT 8 -+#define EDMA_WOL_PT6_LEN_SHIFT 16 -+ -+/* WoL Control Register */ -+#define EDMA_REG_WOL_CTRL 0xC08 -+#define EDMA_WOL_WK_EN 0x00000001 -+#define EDMA_WOL_MG_EN 0x00000002 -+#define EDMA_WOL_PT0_EN 0x00000004 -+#define EDMA_WOL_PT1_EN 0x00000008 -+#define EDMA_WOL_PT2_EN 0x00000010 -+#define EDMA_WOL_PT3_EN 0x00000020 -+#define EDMA_WOL_PT4_EN 0x00000040 -+#define EDMA_WOL_PT5_EN 0x00000080 -+#define EDMA_WOL_PT6_EN 0x00000100 -+ -+/* MAC Control Register */ -+#define EDMA_REG_MAC_CTRL0 0xC20 -+#define EDMA_REG_MAC_CTRL1 0xC24 -+ -+/* WoL Pattern Register */ -+#define EDMA_REG_WOL_PATTERN_START 0x5000 -+#define EDMA_PATTERN_PART_REG_OFFSET 0x40 -+ -+ -+/* TX descriptor fields */ -+#define EDMA_TPD_HDR_SHIFT 0 -+#define EDMA_TPD_PPPOE_EN 0x00000100 -+#define EDMA_TPD_IP_CSUM_EN 0x00000200 -+#define EDMA_TPD_TCP_CSUM_EN 0x0000400 -+#define EDMA_TPD_UDP_CSUM_EN 0x00000800 -+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00 -+#define EDMA_TPD_LSO_EN 0x00001000 -+#define EDMA_TPD_LSO_V2_EN 0x00002000 -+#define EDMA_TPD_IPV4_EN 0x00010000 -+#define EDMA_TPD_MSS_MASK 0x1FFF -+#define EDMA_TPD_MSS_SHIFT 18 -+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18 -+ -+/* RRD descriptor fields */ -+#define EDMA_RRD_NUM_RFD_MASK 0x000F -+#define EDMA_RRD_SVLAN 0x8000 -+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF; -+ -+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF -+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000 -+#define EDMA_RRD_CVLAN 0x0001 -+#define EDMA_RRD_DESC_VALID 0x8000 -+ -+#define EDMA_RRD_PRIORITY_SHIFT 4 -+#define EDMA_RRD_PRIORITY_MASK 0x7 -+#define EDMA_RRD_PORT_TYPE_SHIFT 7 -+#define EDMA_RRD_PORT_TYPE_MASK 0x1F -+#endif /* _ESS_EDMA_H_ */ diff --git a/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch deleted file mode 100644 index 9f9cb5287c..0000000000 --- a/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch +++ /dev/null @@ -1,92 +0,0 @@ -From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sun, 20 Nov 2016 01:01:10 +0100 -Subject: [PATCH] dts: ipq4019: add ethernet essedma node - -This patch adds the device-tree node for the ethernet -interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 60 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -44,6 +44,8 @@ - spi1 = &blsp1_spi2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp1_i2c4; -+ ethernet0 = &gmac0; -+ ethernet1 = &gmac1; - }; - - cpus { -@@ -644,6 +646,64 @@ - status = "disabled"; - }; - -+ edma@c080000 { -+ compatible = "qcom,ess-edma"; -+ reg = <0xc080000 0x8000>; -+ qcom,page-mode = <0>; -+ qcom,rx_head_buf_size = <1540>; -+ qcom,mdio_supported; -+ qcom,poll_required = <1>; -+ qcom,num_gmac = <2>; -+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING -+ 0 66 IRQ_TYPE_EDGE_RISING -+ 0 67 IRQ_TYPE_EDGE_RISING -+ 0 68 IRQ_TYPE_EDGE_RISING -+ 0 69 IRQ_TYPE_EDGE_RISING -+ 0 70 IRQ_TYPE_EDGE_RISING -+ 0 71 IRQ_TYPE_EDGE_RISING -+ 0 72 IRQ_TYPE_EDGE_RISING -+ 0 73 IRQ_TYPE_EDGE_RISING -+ 0 74 IRQ_TYPE_EDGE_RISING -+ 0 75 IRQ_TYPE_EDGE_RISING -+ 0 76 IRQ_TYPE_EDGE_RISING -+ 0 77 IRQ_TYPE_EDGE_RISING -+ 0 78 IRQ_TYPE_EDGE_RISING -+ 0 79 IRQ_TYPE_EDGE_RISING -+ 0 80 IRQ_TYPE_EDGE_RISING -+ 0 240 IRQ_TYPE_EDGE_RISING -+ 0 241 IRQ_TYPE_EDGE_RISING -+ 0 242 IRQ_TYPE_EDGE_RISING -+ 0 243 IRQ_TYPE_EDGE_RISING -+ 0 244 IRQ_TYPE_EDGE_RISING -+ 0 245 IRQ_TYPE_EDGE_RISING -+ 0 246 IRQ_TYPE_EDGE_RISING -+ 0 247 IRQ_TYPE_EDGE_RISING -+ 0 248 IRQ_TYPE_EDGE_RISING -+ 0 249 IRQ_TYPE_EDGE_RISING -+ 0 250 IRQ_TYPE_EDGE_RISING -+ 0 251 IRQ_TYPE_EDGE_RISING -+ 0 252 IRQ_TYPE_EDGE_RISING -+ 0 253 IRQ_TYPE_EDGE_RISING -+ 0 254 IRQ_TYPE_EDGE_RISING -+ 0 255 IRQ_TYPE_EDGE_RISING>; -+ -+ status = "disabled"; -+ -+ gmac0: gmac0 { -+ local-mac-address = [00 00 00 00 00 00]; -+ vlan_tag = <1 0x1f>; -+ }; -+ -+ gmac1: gmac1 { -+ local-mac-address = [00 00 00 00 00 00]; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <1>; -+ qcom,forced_speed = <1000>; -+ qcom,forced_duplex = <1>; -+ vlan_tag = <2 0x20>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch b/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch deleted file mode 100644 index ee6452eebb..0000000000 --- a/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch +++ /dev/null @@ -1,334 +0,0 @@ ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -161,8 +161,10 @@ static void edma_configure_rx(struct edm - /* Set Rx FIFO threshold to start to DMA data to host */ - rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; - -+ if (!edma_cinfo->is_single_phy) { - /* Set RX remove vlan bit */ - rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ } - - edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); - } -@@ -1293,6 +1295,10 @@ void edma_adjust_link(struct net_device - if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { - dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); - adapter->link_state = __EDMA_LINKUP; -+ if (adapter->edma_cinfo->is_single_phy) { -+ ess_set_port_status_speed(adapter->edma_cinfo, phydev, -+ ffs(adapter->dp_bitmap) - 1); -+ } - netif_carrier_on(netdev); - if (netif_running(netdev)) - netif_tx_wake_all_queues(netdev); -@@ -1386,10 +1392,12 @@ netdev_tx_t edma_xmit(struct sk_buff *sk - } - - /* Check and mark VLAN tag offload */ -- if (skb_vlan_tag_present(skb)) -- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -- else if (adapter->default_vlan_tag) -- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ if (!adapter->edma_cinfo->is_single_phy) { -+ if (unlikely(skb_vlan_tag_present(skb))) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -+ else if (adapter->default_vlan_tag) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ } - - /* Check and mark checksum offload */ - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) ---- a/drivers/net/ethernet/qualcomm/essedma/edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -31,6 +31,7 @@ - #include <linux/platform_device.h> - #include <linux/of.h> - #include <linux/of_device.h> -+#include <linux/clk.h> - #include <linux/kernel.h> - #include <linux/device.h> - #include <linux/sysctl.h> -@@ -332,6 +333,9 @@ struct edma_common_info { - struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ - spinlock_t stats_lock; /* protect edma stats area for updation */ - struct timer_list edma_stats_timer; -+ bool is_single_phy; -+ void __iomem *ess_hw_addr; -+ struct clk *ess_clk; - }; - - /* transimit packet descriptor (tpd) ring */ -@@ -444,4 +448,6 @@ void edma_change_tx_coalesce(int usecs); - void edma_change_rx_coalesce(int usecs); - void edma_get_tx_rx_coalesce(u32 *reg_val); - void edma_clear_irq_status(void); -+void ess_set_port_status_speed(struct edma_common_info *edma_cinfo, -+ struct phy_device *phydev, uint8_t port_id); - #endif /* _EDMA_H_ */ ---- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -@@ -17,6 +17,11 @@ - #include <linux/of.h> - #include <linux/of_net.h> - #include <linux/timer.h> -+#include <linux/of_platform.h> -+#include <linux/of_address.h> -+#include <linux/clk.h> -+#include <linux/string.h> -+#include <linux/reset.h> - #include "edma.h" - #include "ess_edma.h" - -@@ -81,6 +86,101 @@ void edma_read_reg(u16 reg_addr, volatil - *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); - } - -+static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value) -+{ -+ writel(reg_value, ((void __iomem *) -+ ((unsigned long)edma->ess_hw_addr + reg_addr))); -+} -+ -+static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr, -+ volatile u32 *reg_value) -+{ -+ *reg_value = readl((void __iomem *) -+ ((unsigned long)edma->ess_hw_addr + reg_addr)); -+} -+ -+static int ess_reset(struct edma_common_info *edma) -+{ -+ struct device_node *switch_node = NULL; -+ struct reset_control *ess_rst; -+ u32 regval; -+ -+ switch_node = of_find_node_by_name(NULL, "ess-switch"); -+ if (!switch_node) { -+ pr_err("switch-node not found\n"); -+ return -EINVAL; -+ } -+ -+ ess_rst = of_reset_control_get(switch_node, "ess_rst"); -+ of_node_put(switch_node); -+ -+ if (IS_ERR(ess_rst)) { -+ pr_err("failed to find ess_rst!\n"); -+ return -ENOENT; -+ } -+ -+ reset_control_assert(ess_rst); -+ msleep(10); -+ reset_control_deassert(ess_rst); -+ msleep(100); -+ reset_control_put(ess_rst); -+ -+ /* Enable only port 5 <--> port 0 -+ * bits 0:6 bitmap of ports it can fwd to */ -+#define SET_PORT_BMP(r,v) \ -+ ess_read_reg(edma, r, ®val); \ -+ ess_write_reg(edma, r, ((regval & ~0x3F) | v)); -+ -+ SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20); -+ SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00); -+ SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01); -+ ess_write_reg(edma, ESS_RGMII_CTRL, 0x400); -+ ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX); -+ ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX); -+ ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0); -+#undef SET_PORT_BMP -+ -+ /* forward multicast and broadcast frames to CPU */ -+ ess_write_reg(edma, ESS_FWD_CTRL1, -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) | -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) | -+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S)); -+ -+ return 0; -+} -+ -+void ess_set_port_status_speed(struct edma_common_info *edma, -+ struct phy_device *phydev, uint8_t port_id) -+{ -+ uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id); -+ uint32_t reg_val = 0; -+ -+ ess_read_reg(edma, reg_off, ®_val); -+ -+ /* reset the speed bits [0:1] */ -+ reg_val &= ~ESS_PORT_STATUS_SPEED_INV; -+ -+ /* set the new speed */ -+ switch(phydev->speed) { -+ case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break; -+ case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break; -+ case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break; -+ default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break; -+ } -+ -+ /* check full/half duplex */ -+ if (phydev->duplex) { -+ reg_val |= ESS_PORT_STATUS_DUPLEX_MODE; -+ } else { -+ reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE; -+ } -+ -+ ess_write_reg(edma, reg_off, reg_val); -+} -+ - /* edma_change_tx_coalesce() - * change tx interrupt moderation timer - */ -@@ -550,6 +650,31 @@ static struct ctl_table edma_table[] = { - {} - }; - -+static int ess_parse(struct edma_common_info *edma) -+{ -+ struct device_node *switch_node; -+ int ret = -EINVAL; -+ -+ switch_node = of_find_node_by_name(NULL, "ess-switch"); -+ if (!switch_node) { -+ pr_err("cannot find ess-switch node\n"); -+ goto out; -+ } -+ -+ edma->ess_hw_addr = of_io_request_and_map(switch_node, -+ 0, KBUILD_MODNAME); -+ if (!edma->ess_hw_addr) { -+ pr_err("%s ioremap fail.", __func__); -+ goto out; -+ } -+ -+ edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); -+ ret = clk_prepare_enable(edma->ess_clk); -+out: -+ of_node_put(switch_node); -+ return ret; -+} -+ - /* edma_axi_netdev_ops - * Describe the operations supported by registered netdevices - * -@@ -785,6 +910,17 @@ static int edma_axi_probe(struct platfor - miibus = mdio_data->mii_bus; - } - -+ if (of_property_read_bool(np, "qcom,single-phy") && -+ edma_cinfo->num_gmac == 1) { -+ err = ess_parse(edma_cinfo); -+ if (!err) -+ err = ess_reset(edma_cinfo); -+ if (err) -+ goto err_single_phy_init; -+ else -+ edma_cinfo->is_single_phy = true; -+ } -+ - for_each_available_child_of_node(np, pnp) { - const char *mac_addr; - -@@ -1073,11 +1209,15 @@ static int edma_axi_probe(struct platfor - - for (i = 0; i < edma_cinfo->num_gmac; i++) { - if (adapter[i]->poll_required) { -+ int phy_mode = of_get_phy_mode(np); -+ -+ if (phy_mode < 0) -+ phy_mode = PHY_INTERFACE_MODE_SGMII; - adapter[i]->phydev = - phy_connect(edma_netdev[i], - (const char *)adapter[i]->phy_id, - &edma_adjust_link, -- PHY_INTERFACE_MODE_SGMII); -+ phy_mode); - if (IS_ERR(adapter[i]->phydev)) { - dev_dbg(&pdev->dev, "PHY attach FAIL"); - err = -EIO; -@@ -1121,6 +1261,9 @@ err_rmap_alloc_fail: - for (i = 0; i < edma_cinfo->num_gmac; i++) - unregister_netdev(edma_netdev[i]); - err_register: -+err_single_phy_init: -+ iounmap(edma_cinfo->ess_hw_addr); -+ clk_disable_unprepare(edma_cinfo->ess_clk); - err_mdiobus_init_fail: - edma_free_rx_rings(edma_cinfo); - err_rx_rinit: -@@ -1181,6 +1324,8 @@ static int edma_axi_remove(struct platfo - del_timer_sync(&edma_cinfo->edma_stats_timer); - edma_free_irqs(adapter); - unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); -+ iounmap(edma_cinfo->ess_hw_addr); -+ clk_disable_unprepare(edma_cinfo->ess_clk); - edma_free_tx_resources(edma_cinfo); - edma_free_rx_resources(edma_cinfo); - edma_free_tx_rings(edma_cinfo); ---- a/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -@@ -329,4 +329,61 @@ struct edma_hw; - #define EDMA_RRD_PRIORITY_MASK 0x7 - #define EDMA_RRD_PORT_TYPE_SHIFT 7 - #define EDMA_RRD_PORT_TYPE_MASK 0x1F -+ -+#define ESS_RGMII_CTRL 0x0004 -+ -+/* Port status registers */ -+#define ESS_PORT0_STATUS 0x007C -+#define ESS_PORT1_STATUS 0x0080 -+#define ESS_PORT2_STATUS 0x0084 -+#define ESS_PORT3_STATUS 0x0088 -+#define ESS_PORT4_STATUS 0x008C -+#define ESS_PORT5_STATUS 0x0090 -+ -+#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80 -+#define ESS_PORT_STATUS_DUPLEX_MODE 0x40 -+#define ESS_PORT_STATUS_RX_FLOW_EN 0x20 -+#define ESS_PORT_STATUS_TX_FLOW_EN 0x10 -+#define ESS_PORT_STATUS_RX_MAC_EN 0x08 -+#define ESS_PORT_STATUS_TX_MAC_EN 0x04 -+#define ESS_PORT_STATUS_SPEED_INV 0x03 -+#define ESS_PORT_STATUS_SPEED_1000 0x02 -+#define ESS_PORT_STATUS_SPEED_100 0x01 -+#define ESS_PORT_STATUS_SPEED_10 0x00 -+ -+#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \ -+ ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \ -+ ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000) -+ -+#define PHY_STATUS_REG 0x11 -+#define PHY_STATUS_SPEED 0xC000 -+#define PHY_STATUS_SPEED_SHIFT 14 -+#define PHY_STATUS_DUPLEX 0x2000 -+#define PHY_STATUS_DUPLEX_SHIFT 13 -+#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800 -+#define PHY_STATUS_CARRIER 0x0400 -+#define PHY_STATUS_CARRIER_SHIFT 10 -+ -+/* Port lookup control registers */ -+#define ESS_PORT0_LOOKUP_CTRL 0x0660 -+#define ESS_PORT1_LOOKUP_CTRL 0x066C -+#define ESS_PORT2_LOOKUP_CTRL 0x0678 -+#define ESS_PORT3_LOOKUP_CTRL 0x0684 -+#define ESS_PORT4_LOOKUP_CTRL 0x0690 -+#define ESS_PORT5_LOOKUP_CTRL 0x069C -+ -+#define ESS_PORT0_HEADER_CTRL 0x009C -+ -+#define ESS_PORTS_ALL 0x3f -+ -+#define ESS_FWD_CTRL1 0x0624 -+#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7) -+#define ESS_FWD_CTRL1_UC_FLOOD_S 0 -+#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7) -+#define ESS_FWD_CTRL1_MC_FLOOD_S 8 -+#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7) -+#define ESS_FWD_CTRL1_BC_FLOOD_S 16 -+#define ESS_FWD_CTRL1_IGMP BITS(24, 7) -+#define ESS_FWD_CTRL1_IGMP_S 24 -+ - #endif /* _ESS_EDMA_H_ */ diff --git a/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch b/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch deleted file mode 100644 index 8c70fceb01..0000000000 --- a/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 17681f0bb474d0d227f07369144149d1555d8bce Mon Sep 17 00:00:00 2001 -From: Chen Minqiang <ptpt52@gmail.com> -Date: Sun, 17 Jun 2018 04:14:13 +0800 -Subject: [PATCH] essedma: alloc skb ip align - -Signed-off-by: Chen Minqiang <ptpt52@gmail.com> ---- - drivers/net/ethernet/qualcomm/essedma/edma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -201,7 +201,7 @@ static int edma_alloc_rx_buf(struct edma - skb = sw_desc->skb; - } else { - /* alloc skb */ -- skb = netdev_alloc_skb(edma_netdev[0], length); -+ skb = netdev_alloc_skb_ip_align(edma_netdev[0], length); - if (!skb) { - /* Better luck next round */ - break; diff --git a/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch b/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch deleted file mode 100644 index 5b9fcf780c..0000000000 --- a/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 72c050acbc425ef99313d5c2e4c866e25567e569 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair <ranair@codeaurora.org> -Date: Thu, 8 Jun 2017 14:29:20 +0530 -Subject: [PATCH] CHROMIUM: net: qualcomm: Add fix for memory allocation issues - -Added ethtool counters for memory allocation failures accounting. -Added support to track number of allocation failures that could -not be fulfilled in the current iteration in the rx descriptor -field and use the info to allocate in the subsequent iteration. - -Change-Id: Ie4fd3b6cf25304e5db2c9247a498791e7e9bb4aa -Signed-off-by: Rakesh Nair <ranair@codeaurora.org> -Signed-off-by: Kan Yan <kyan@google.com> -Reviewed-on: https://chromium-review.googlesource.com/535419 -Reviewed-by: Grant Grundler <grundler@chromium.org> ---- - drivers/net/ethernet/qualcomm/essedma/edma.c | 54 ++++++++++++++----- - drivers/net/ethernet/qualcomm/essedma/edma.h | 2 + - .../ethernet/qualcomm/essedma/edma_ethtool.c | 1 + - 3 files changed, 43 insertions(+), 14 deletions(-) - ---- a/drivers/net/ethernet/qualcomm/essedma/edma.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -103,6 +103,9 @@ static int edma_alloc_rx_ring(struct edm - return -ENOMEM; - } - -+ /* Initialize pending_fill */ -+ erxd->pending_fill = 0; -+ - return 0; - } - -@@ -185,11 +188,8 @@ static int edma_alloc_rx_buf(struct edma - u16 prod_idx, length; - u32 reg_data; - -- if (cleaned_count > erdr->count) { -- dev_err(&pdev->dev, "Incorrect cleaned_count %d", -- cleaned_count); -- return -1; -- } -+ if (cleaned_count > erdr->count) -+ cleaned_count = erdr->count - 1; - - i = erdr->sw_next_to_fill; - -@@ -199,6 +199,9 @@ static int edma_alloc_rx_buf(struct edma - - if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { - skb = sw_desc->skb; -+ -+ /* Clear REUSE Flag */ -+ sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE; - } else { - /* alloc skb */ - skb = netdev_alloc_skb_ip_align(edma_netdev[0], length); -@@ -264,6 +267,13 @@ static int edma_alloc_rx_buf(struct edma - reg_data &= ~EDMA_RFD_PROD_IDX_BITS; - reg_data |= prod_idx; - edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); -+ -+ /* If we couldn't allocate all the buffers -+ * we increment the alloc failure counters -+ */ -+ if (cleaned_count) -+ edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++; -+ - return cleaned_count; - } - -@@ -534,7 +544,7 @@ static int edma_rx_complete_paged(struct - * edma_rx_complete() - * Main api called from the poll function to process rx packets. - */ --static void edma_rx_complete(struct edma_common_info *edma_cinfo, -+static u16 edma_rx_complete(struct edma_common_info *edma_cinfo, - int *work_done, int work_to_do, int queue_id, - struct napi_struct *napi) - { -@@ -554,6 +564,7 @@ static void edma_rx_complete(struct edma - u16 count = erdr->count, rfd_avail; - u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; - -+ cleaned_count = erdr->pending_fill; - sw_next_to_clean = erdr->sw_next_to_clean; - - edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -@@ -652,12 +663,13 @@ static void edma_rx_complete(struct edma - (*work_done)++; - drop_count = 0; - } -- if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) { - /* If buffer clean count reaches 16, we replenish HW buffers. */ - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - sw_next_to_clean); - cleaned_count = ret_count; -+ erdr->pending_fill = ret_count; - } - continue; - } -@@ -730,11 +742,12 @@ static void edma_rx_complete(struct edma - adapter->stats.rx_bytes += length; - - /* Check if we reached refill threshold */ -- if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ if (cleaned_count >= EDMA_RX_BUFFER_WRITE) { - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - sw_next_to_clean); - cleaned_count = ret_count; -+ erdr->pending_fill = ret_count; - } - - /* At this point skb should go to stack */ -@@ -756,11 +769,17 @@ static void edma_rx_complete(struct edma - /* Refill here in case refill threshold wasn't reached */ - if (likely(cleaned_count)) { - ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -- if (ret_count) -- dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ erdr->pending_fill = ret_count; -+ if (ret_count) { -+ if (net_ratelimit()) -+ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ } -+ - edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), - erdr->sw_next_to_clean); - } -+ -+ return erdr->pending_fill; - } - - /* edma_delete_rfs_filter() -@@ -2064,6 +2083,7 @@ int edma_poll(struct napi_struct *napi, - u32 shadow_rx_status, shadow_tx_status; - int queue_id; - int i, work_done = 0; -+ u16 rx_pending_fill; - - /* Store the Rx/Tx status by ANDing it with - * appropriate CPU RX?TX mask -@@ -2097,13 +2117,19 @@ int edma_poll(struct napi_struct *napi, - */ - while (edma_percpu_info->rx_status) { - queue_id = ffs(edma_percpu_info->rx_status) - 1; -- edma_rx_complete(edma_cinfo, &work_done, -- budget, queue_id, napi); -+ rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done, -+ budget, queue_id, napi); - -- if (likely(work_done < budget)) -+ if (likely(work_done < budget)) { -+ if (rx_pending_fill) { -+ /* reschedule poll() to refill rx buffer deficit */ -+ work_done = budget; -+ break; -+ } - edma_percpu_info->rx_status &= ~(1 << queue_id); -- else -+ } else { - break; -+ } - } - - /* Clear the status register, to avoid the interrupts to ---- a/drivers/net/ethernet/qualcomm/essedma/edma.h -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -225,6 +225,7 @@ struct edma_ethtool_statistics { - u32 rx_q6_byte; - u32 rx_q7_byte; - u32 tx_desc_error; -+ u32 rx_alloc_fail_ctr; - }; - - struct edma_mdio_data { -@@ -362,6 +363,7 @@ struct edma_rfd_desc_ring { - dma_addr_t dma; /* descriptor ring physical address */ - u16 sw_next_to_fill; /* next descriptor to fill */ - u16 sw_next_to_clean; /* next descriptor to clean */ -+ u16 pending_fill; /* fill pending from previous iteration */ - }; - - /* edma_rfs_flter_node - rfs filter node in hash table */ ---- a/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -@@ -78,6 +78,7 @@ static const struct edma_ethtool_stats e - {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, - {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, - {"tx_desc_error", EDMA_STAT(tx_desc_error)}, -+ {"rx_alloc_fail_ctr", EDMA_STAT(rx_alloc_fail_ctr)}, - }; - - #define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) diff --git a/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 7b4eeff5bb..0000000000 --- a/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,180 +0,0 @@ -From: Christian Lamparter <chunkeey@googlemail.com> -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st - obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o - obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -146,6 +146,13 @@ config QCOM_SMSM - Say yes here to support the Qualcomm Shared Memory State Machine. - The state machine is represented by bits in shared memory. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/of_platform.h> -+#include <linux/platform_device.h> -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch deleted file mode 100644 index 5157079762..0000000000 --- a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch +++ /dev/null @@ -1,157 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -15,6 +15,7 @@ - */ - - #include "qcom-ipq4019.dtsi" -+#include <dt-bindings/soc/qcom,tcsr.h> - - / { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; -@@ -29,6 +30,32 @@ - }; - - soc { -+ tcsr@194b000 { -+ /* select hostmode */ -+ compatible = "qcom,tcsr"; -+ reg = <0x194b000 0x100>; -+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; -+ status = "okay"; -+ }; -+ -+ ess_tcsr@1953000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1953000 0x1000>; -+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>; -+ }; -+ -+ tcsr@1949000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1949000 0x100>; -+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; -+ }; -+ -+ tcsr@1957000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1957000 0x100>; -+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; -+ }; -+ - rng@22000 { - status = "ok"; - }; -@@ -74,14 +101,6 @@ - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; -- -- mx25l25635e@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- reg = <0>; -- compatible = "mx25l25635e"; -- spi-max-frequency = <24000000>; -- }; - }; - - serial@78af000 { -@@ -110,6 +129,22 @@ - status = "ok"; - }; - -+ mdio@90000 { -+ status = "okay"; -+ }; -+ -+ ess-switch@c000000 { -+ status = "okay"; -+ }; -+ -+ ess-psgmii@98000 { -+ status = "okay"; -+ }; -+ -+ edma@c080000 { -+ status = "okay"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -18,5 +18,73 @@ - - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; -+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1"; - -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x10000000>; -+ }; -+}; -+ -+&blsp1_spi1 { -+ mx25l25635f@0 { -+ compatible = "mx25l25635f", "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0>; -+ spi-max-frequency = <24000000>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x40000>; -+ read-only; -+ }; -+ MIBIB@40000 { -+ label = "MIBIB"; -+ reg = <0x40000 0x20000>; -+ read-only; -+ }; -+ QSEE@60000 { -+ label = "QSEE"; -+ reg = <0x60000 0x60000>; -+ read-only; -+ }; -+ CDT@c0000 { -+ label = "CDT"; -+ reg = <0xc0000 0x10000>; -+ read-only; -+ }; -+ DDRPARAMS@d0000 { -+ label = "DDRPARAMS"; -+ reg = <0xd0000 0x10000>; -+ read-only; -+ }; -+ APPSBLENV@e0000 { -+ label = "APPSBLENV"; -+ reg = <0xe0000 0x10000>; -+ read-only; -+ }; -+ APPSBL@f0000 { -+ label = "APPSBL"; -+ reg = <0xf0000 0x80000>; -+ read-only; -+ }; -+ ART@170000 { -+ label = "ART"; -+ reg = <0x170000 0x10000>; -+ read-only; -+ }; -+ kernel@180000 { -+ label = "kernel"; -+ reg = <0x180000 0x400000>; -+ }; -+ rootfs@580000 { -+ label = "rootfs"; -+ reg = <0x580000 0x1600000>; -+ }; -+ firmware@180000 { -+ label = "firmware"; -+ reg = <0x180000 0x1a00000>; -+ }; -+ }; - }; diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch deleted file mode 100644 index 77c48a36d6..0000000000 --- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch +++ /dev/null @@ -1,62 +0,0 @@ -From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Thu, 9 Mar 2017 11:03:18 +0100 -Subject: [PATCH] arm: boot: add dts files - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -785,11 +785,49 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ -+ qcom-ipq4018-a42.dtb \ -+ qcom-ipq4018-ap120c-ac.dtb \ -+ qcom-ipq4018-dap-2610.dtb \ -+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \ -+ qcom-ipq4018-ea6350v3.dtb \ -+ qcom-ipq4018-eap1300.dtb \ -+ qcom-ipq4018-emd1.dtb \ -+ qcom-ipq4018-ens620ext.dtb \ -+ qcom-ipq4018-ex6100v2.dtb \ -+ qcom-ipq4018-ex6150v2.dtb \ -+ qcom-ipq4018-fritzbox-4040.dtb \ -+ qcom-ipq4018-jalapeno.dtb \ -+ qcom-ipq4018-meshpoint-one.dtb \ -+ qcom-ipq4018-nbg6617.dtb \ -+ qcom-ipq4018-rt-ac58u.dtb \ -+ qcom-ipq4018-wre6606.dtb \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c3.dtb \ - qcom-ipq4019-ap.dk07.1-c1.dtb \ - qcom-ipq4019-ap.dk07.1-c2.dtb \ -+ qcom-ipq4019-a62.dtb \ -+ qcom-ipq4019-cm520-79f.dtb \ -+ qcom-ipq4019-eap2200.dtb \ -+ qcom-ipq4019-fritzbox-7530.dtb \ -+ qcom-ipq4019-fritzrepeater-1200.dtb \ -+ qcom-ipq4019-fritzrepeater-3000.dtb \ -+ qcom-ipq4019-ea8300.dtb \ -+ qcom-ipq4019-habanero-dvk.dtb \ -+ qcom-ipq4019-map-ac2200.dtb \ -+ qcom-ipq4019-e2600ac-c1.dtb \ -+ qcom-ipq4019-e2600ac-c2.dtb \ -+ qcom-ipq4019-rtl30vw.dtb \ -+ qcom-ipq4019-u4019-32m.dtb \ -+ qcom-ipq4019-wpj419.dtb \ -+ qcom-ipq4019-wtr-m2133hp.dtb \ -+ qcom-ipq4028-wpj428.dtb \ -+ qcom-ipq4029-ap-303.dtb \ -+ qcom-ipq4029-ap-303h.dtb \ -+ qcom-ipq4029-ap-365.dtb \ -+ qcom-ipq4029-gl-b1300.dtb \ -+ qcom-ipq4029-gl-s1300.dtb \ -+ qcom-ipq4029-mr33.dtb \ - qcom-ipq8064-ap148.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch b/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch deleted file mode 100644 index 7600b0e83f..0000000000 --- a/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1090,6 +1090,9 @@ int __init early_init_dt_scan_chosen(uns - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); -+ p = of_get_flat_dt_prop(node, "bootargs-append", &l); -+ if (p != NULL && l > 0) -+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); - - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else |