diff options
7 files changed, 297 insertions, 5 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index f956cf4ed4..85a0342a60 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -26,6 +26,7 @@ glinet,gl-ar750s-nor-nand|\ librerouter,librerouter-v1|\ netgear,ex6400|\ netgear,ex7300|\ +netgear,wndr4300-v2|\ netgear,wnr1000-v2|\ netgear,wnr2000-v3|\ netgear,wnr2200-8m|\ diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi new file mode 100644 index 0000000000..2ab9b0b34a --- /dev/null +++ b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca956x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_power_amber; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_amber; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + ath9k-keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + rfkill { + label = "rfkill"; + linux,code = <KEY_RFKILL>; + gpios = <&ath9k 9 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + led_power_green: power_green { + label = "netgear:green:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + led_power_amber: power_amber { + label = "netgear:amber:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wan_green { + label = "netgear:green:wan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "netgear:amber:wan"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wlan2g_green { + label = "netgear:green:wlan2g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wps_green { + label = "netgear:green:wps"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + wlan5g_blue { + label = "netgear:blue:wlan5g"; + gpios = <&ath9k 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <2>; + cs-gpios = <0>, <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "caldata_backup"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "config"; + reg = <0x60000 0x10000>; + }; + + partition@70000 { + label = "traffic_meter"; + reg = <0x70000 0x10000>; + }; + + partition@80000 { + label = "pot"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "reserved"; + reg = <0x90000 0x160000>; + }; + + art: partition@1f0000 { + label = "caldata"; + reg = <0x1f0000 0x10000>; + read-only; + }; + }; + }; + + flash@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + qca,mib-poll-interval = <500>; + + qca,ar8327-initvals = < + 0x04 0x00000080 /* PORT0 PAD MODE CTRL */ + 0x10 0x81000080 /* POWER_ON_STRIP */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xcb37cb37 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x00f3cf00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x00000200 /* PORT6_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + qca,no-eeprom; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0 { + /* chip is AR9580, override bogus PCI ID 168c:abcd */ + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&art 0xc>; + qca,no-eeprom; + qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */ + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&uart { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts b/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts new file mode 100644 index 0000000000..e4b4ba2ac6 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "qca9563_netgear_wndr.dtsi" + +/ { + compatible = "netgear,wndr4300-v2", "qca,qca9563"; + model = "Netgear WNDR4300 v2"; +}; + +&leds { + usb_green { + label = "netgear:green:usb"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; +}; diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index d2018afb61..d5213523e4 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -154,6 +154,17 @@ define Device/netgear_wndr4300 endef TARGET_DEVICES += netgear_wndr4300 +define Device/netgear_wndr4300-v2 + SOC := qca9563 + DEVICE_MODEL := WNDR4300 + DEVICE_VARIANT := v2 + NETGEAR_KERNEL_MAGIC := 0x27051956 + NETGEAR_BOARD_ID := WNDR4500series + NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175 + $(Device/netgear_ath79_nand) +endef +TARGET_DEVICES += netgear_wndr4300-v2 + define Device/zyxel_nbg6716 SOC := qca9558 DEVICE_VENDOR := ZyXEL diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds index 49d4005495..0376b7cfc6 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds @@ -13,7 +13,8 @@ glinet,gl-ar300m-nor) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" ;; netgear,wndr3700-v4|\ -netgear,wndr4300) +netgear,wndr4300|\ +netgear,wndr4300-v2) ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20" ;; esac diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network index f7e43addc1..135a06d44b 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network @@ -17,7 +17,8 @@ ath79_setup_interfaces() "0@eth0" "2:lan:2" "3:lan:1" "1:wan" ;; netgear,wndr3700-v4|\ - netgear,wndr4300) + netgear,wndr4300|\ + netgear,wndr4300-v2) ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; @@ -37,7 +38,8 @@ ath79_setup_macs() case "$board" in netgear,wndr3700-v4|\ - netgear,wndr4300) + netgear,wndr4300|\ + netgear,wndr4300-v2) wan_mac=$(mtd_get_mac_binary caldata 0x6) ;; zyxel,nbg6716) diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 25bafe67ac..7ee291d109 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -10,7 +10,8 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in netgear,wndr3700-v4|\ - netgear,wndr4300) + netgear,wndr4300|\ + netgear,wndr4300-v2) caldata_extract "caldata" 0x1000 0x440 ;; zyxel,nbg6716) @@ -25,7 +26,8 @@ case "$FIRMWARE" in "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in netgear,wndr3700-v4|\ - netgear,wndr4300) + netgear,wndr4300|\ + netgear,wndr4300-v2) caldata_extract "caldata" 0x5000 0x440 ;; *) |