diff options
6 files changed, 36 insertions, 26 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi index 60f7f7a4c0..85c584c1f1 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi @@ -409,6 +409,8 @@ }; usb0: usb@e101000 { + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; compatible = "lantiq,xrx200-usb"; reg = <0xe101000 0x1000 @@ -418,9 +420,16 @@ dr_mode = "host"; phys = <&usb_phy0>; phy-names = "usb2-phy"; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; }; usb1: usb@e106000 { + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; compatible = "lantiq,xrx200-usb"; reg = <0xe106000 0x1000>; @@ -429,6 +438,11 @@ dr_mode = "host"; phys = <&usb_phy1>; phy-names = "usb2-phy"; + + ehci_port2: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; }; eth0: eth@e108000 { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi index f5b0b4f2a1..9cac3e6ec0 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi @@ -15,9 +15,6 @@ led-failsafe = &power; led-running = &power; led-upgrade = &power; - - led-usb = &led_usb1; - led-usb2 = &led_usb2; }; memory@0 { @@ -64,13 +61,18 @@ label = "green:fxo"; gpios = <&stp 19 GPIO_ACTIVE_HIGH>; }; - led_usb1: usb1 { + usb1 { label = "green:usb1"; gpios = <&stp 18 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ehci_port1>; + linux,default-trigger = "usbport"; }; - led_usb2: usb2 { + + usb2 { label = "green:usb2"; gpios = <&stp 15 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; }; sd { label = "green:sd"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi index aa6c308ffe..d33b817f2d 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi @@ -18,8 +18,6 @@ led-dsl = &led_dsl; led-internet = &led_internet; led-wifi = &led_wifi; - led-usb = &led_usb0; - led-usb2 = &led_usb2; }; memory@0 { @@ -67,14 +65,18 @@ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; - led_usb0: usb0 { + usb0 { label = "green:usb"; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ehci_port1>; + linux,default-trigger = "usbport"; }; - led_usb2: usb2 { + usb2 { label = "green:usb2"; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; }; led_wps: wps { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi index 19cfb822eb..aa76f66267 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi @@ -13,9 +13,6 @@ led-dsl = &led_dsl; led-internet = &led_internet; led-wifi = &led_wlan5g; - - led-usb = &led_usb; - led-usb2 = &led_usb; }; memory@0 { @@ -66,9 +63,11 @@ gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; - led_usb: usb { + usb { label = "blue:usb"; gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; eth { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts index 2812df7e68..0e029d1995 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts @@ -4,19 +4,18 @@ compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; model = "ZyXEL P-2812HNU-F1"; - aliases { - led-usb = &led_usb1; - led-usb2 = &led_usb2; - }; - leds { - led_usb1: usb1 { + usb1 { label = "green:usb1"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>; + linux,default-trigger = "usbport"; }; - led_usb2: usb2 { + usb2 { label = "green:usb2"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; }; }; }; diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds index 6a19f52a1e..6fd8151a4f 100755 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds @@ -11,12 +11,6 @@ board_config_update led_wifi="$(get_dt_led wifi)" [ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt" -led_usb="$(get_dt_led usb)" -[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1" - -led_usb2="$(get_dt_led usb2)" -[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1" - led_dsl="$(get_dt_led dsl)" [ -n "$led_dsl" ] && { led_internet="$(get_dt_led internet)" |