aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch70
-rw-r--r--target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch29
-rw-r--r--target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch104
-rw-r--r--target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch56
-rw-r--r--target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch98
-rw-r--r--target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch28
-rw-r--r--target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch90
-rw-r--r--target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch63
-rw-r--r--target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch361
-rw-r--r--target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch26
-rw-r--r--target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch228
-rw-r--r--target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch36
-rw-r--r--target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch74
-rw-r--r--target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch216
-rw-r--r--target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch621
-rw-r--r--target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch31
16 files changed, 0 insertions, 2131 deletions
diff --git a/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
deleted file mode 100644
index 0dc9debbfd..0000000000
--- a/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From patchwork Mon May 21 20:57:38 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
-X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
-X-Patchwork-Id: 917856
-Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
-To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
- Linus Walleij <linus.walleij@linaro.org>,
- Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
- Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Andy Gross <andy.gross@linaro.org>,
- Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Mon, 21 May 2018 22:57:38 +0200
-From: Christian Lamparter <chunkeey@gmail.com>
-List-Id: <linux-gpio.vger.kernel.org>
-
-This patch adds the gpio-ranges property to almost all of
-the Qualcomm ARM platforms that utilize the pinctrl-msm
-framework.
-
-The gpio-ranges property is part of the gpiolib subsystem.
-As a result, the binding text is available in section
-"2.1 gpio- and pin-controller interaction" of
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-For more information please see the patch titled:
-"pinctrl: msm: fix gpio-hog related boot issues" from
-this series.
-
-Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
----
-To help with git bisect, the DT update patch has been intentionally
-placed after the "pinctrl: msm: fix gpio-hog related boot issues".
-Otherwise - if the order was reveresed - and bisect decides to split
-between these two patches, the gpiochip_add_pin_ranges() function
-will be executed twice with the same parameters for the same pinctrl.
----
- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
- 13 files changed, 14 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -119,6 +119,7 @@
- reg = <0x800000 0x4000>;
-
- gpio-controller;
-+ gpio-ranges = <&qcom_pinmux 0 0 69>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
diff --git a/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch b/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch
deleted file mode 100644
index f5483ac734..0000000000
--- a/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 51befb888f62b1a62434fb4b82328d698a30f9de Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 19 Mar 2020 23:44:24 +0100
-Subject: ARM: dts: qcom: add scm definition to ipq806x
-
-Add missing scm definition for ipq806x soc
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20200319224424.18473-1-ansuelsmth@gmail.com
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -93,6 +93,12 @@
- };
- };
-
-+ firmware {
-+ scm {
-+ compatible = "qcom,scm-ipq806x", "qcom,scm";
-+ };
-+ };
-+
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
deleted file mode 100644
index 2b5171fc54..0000000000
--- a/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 13bec8d49bdf10aab4e1570ef42417f6bfbb6126 Mon Sep 17 00:00:00 2001
-From: Ajay Kishore <akisho@codeaurora.org>
-Date: Fri, 27 Mar 2020 23:32:08 +0100
-Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
-
-For IPQ806x targets, TZ protects the registers that are used to
-configure the routing of interrupts to a target processor.
-To resolve this, this patch uses scm call to route GPIO interrupts
-to application processor. Also the scm call interface is changed.
-
-Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/qcom/pinctrl-msm.c | 43 ++++++++++++++++++++++++++++++++------
- 1 file changed, 37 insertions(+), 6 deletions(-)
-
-(limited to 'drivers/pinctrl/qcom/pinctrl-msm.c')
-
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -22,6 +22,8 @@
- #include <linux/reboot.h>
- #include <linux/pm.h>
- #include <linux/log2.h>
-+#include <linux/qcom_scm.h>
-+#include <linux/io.h>
-
- #include "../core.h"
- #include "../pinconf.h"
-@@ -57,6 +59,8 @@ struct msm_pinctrl {
- struct irq_chip irq_chip;
- int irq;
-
-+ bool intr_target_use_scm;
-+
- raw_spinlock_t lock;
-
- DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
-@@ -64,6 +68,7 @@ struct msm_pinctrl {
-
- const struct msm_pinctrl_soc_data *soc;
- void __iomem *regs[MAX_NR_TILES];
-+ u32 phys_base[MAX_NR_TILES];
- };
-
- #define MSM_ACCESSOR(name) \
-@@ -832,11 +837,30 @@ static int msm_gpio_irq_set_type(struct
- else
- clear_bit(d->hwirq, pctrl->dual_edge_irqs);
-
-- /* Route interrupts to application cpu */
-- val = msm_readl_intr_target(pctrl, g);
-- val &= ~(7 << g->intr_target_bit);
-- val |= g->intr_target_kpss_val << g->intr_target_bit;
-- msm_writel_intr_target(val, pctrl, g);
-+ /* Route interrupts to application cpu.
-+ * With intr_target_use_scm interrupts are routed to
-+ * application cpu using scm calls.
-+ */
-+ if (pctrl->intr_target_use_scm) {
-+ u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
-+ int ret;
-+
-+ qcom_scm_io_readl(addr, &val);
-+
-+ val &= ~(7 << g->intr_target_bit);
-+ val |= g->intr_target_kpss_val << g->intr_target_bit;
-+
-+ ret = qcom_scm_io_writel(addr, val);
-+ if (ret)
-+ dev_err(pctrl->dev,
-+ "Failed routing %lu interrupt to Apps proc",
-+ d->hwirq);
-+ } else {
-+ val = msm_readl_intr_target(pctrl, g);
-+ val &= ~(7 << g->intr_target_bit);
-+ val |= g->intr_target_kpss_val << g->intr_target_bit;
-+ msm_writel_intr_target(val, pctrl, g);
-+ }
-
- /* Update configuration for gpio.
- * RAW_STATUS_EN is left on for all gpio irqs. Due to the
-@@ -1138,6 +1162,9 @@ int msm_pinctrl_probe(struct platform_de
- pctrl->dev = &pdev->dev;
- pctrl->soc = soc_data;
- pctrl->chip = msm_gpio_template;
-+ pctrl->intr_target_use_scm = of_device_is_compatible(
-+ pctrl->dev->of_node,
-+ "qcom,ipq8064-pinctrl");
-
- raw_spin_lock_init(&pctrl->lock);
-
-@@ -1154,6 +1181,8 @@ int msm_pinctrl_probe(struct platform_de
- pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pctrl->regs[0]))
- return PTR_ERR(pctrl->regs[0]);
-+
-+ pctrl->phys_base[0] = res->start;
- }
-
- msm_pinctrl_setup_pm_reset(pctrl);
diff --git a/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch b/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch
deleted file mode 100644
index 612c33cd0e..0000000000
--- a/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 8d8cec9bf6e9260397872785f249dfb59a417d08 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 19 Feb 2020 18:59:39 +0100
-Subject: ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions
-
-Add missing gpio definition for mdio and rgmii2.
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20200219175940.744-1-ansuelsmth@gmail.com
-Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-@@ -299,7 +299,7 @@ static const char * const gpio_groups[]
- };
-
- static const char * const mdio_groups[] = {
-- "gpio0", "gpio1", "gpio10", "gpio11",
-+ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66",
- };
-
- static const char * const mi2s_groups[] = {
-@@ -403,8 +403,8 @@ static const char * const usb2_hsic_grou
- };
-
- static const char * const rgmii2_groups[] = {
-- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62",
-+ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66",
- };
-
- static const char * const sata_groups[] = {
-@@ -539,7 +539,7 @@ static const struct msm_function ipq8064
- static const struct msm_pingroup ipq8064_groups[] = {
- PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA),
-@@ -603,7 +603,7 @@ static const struct msm_pingroup ipq8064
- PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6),
diff --git a/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch b/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch
deleted file mode 100644
index 605eb7d07b..0000000000
--- a/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 000de5417107623925a4cf0310579f744ff43c28 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 4 Feb 2020 20:56:48 +0100
-Subject: watchdog: qcom-wdt: disable pretimeout on timer platform
-
-Some platform like ipq806x doesn't support pretimeout and define
-some interrupts used by qcom,msm-timer. Change the driver to check
-and use pretimeout only on qcom,kpss-wdt as it's the only platform
-that actually supports it.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com
-[groeck: Conflict resolution]
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
- 1 file changed, 23 insertions(+), 8 deletions(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[]
- [WDT_BITE_TIME] = 0x14,
- };
-
-+struct qcom_wdt_match_data {
-+ const u32 *offset;
-+ bool pretimeout;
-+};
-+
- struct qcom_wdt {
- struct watchdog_device wdd;
- unsigned long rate;
-@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(v
- clk_disable_unprepare(data);
- }
-
-+static const struct qcom_wdt_match_data match_data_apcs_tmr = {
-+ .offset = reg_offset_data_apcs_tmr,
-+ .pretimeout = false,
-+};
-+
-+static const struct qcom_wdt_match_data match_data_kpss = {
-+ .offset = reg_offset_data_kpss,
-+ .pretimeout = true,
-+};
-+
- static int qcom_wdt_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct qcom_wdt *wdt;
- struct resource *res;
- struct device_node *np = dev->of_node;
-- const u32 *regs;
-+ const struct qcom_wdt_match_data *data;
- u32 percpu_offset;
- int irq, ret;
- struct clk *clk;
-
-- regs = of_device_get_match_data(dev);
-- if (!regs) {
-+ data = of_device_get_match_data(dev);
-+ if (!data) {
- dev_err(dev, "Unsupported QCOM WDT module\n");
- return -ENODEV;
- }
-@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platfor
-
- /* check if there is pretimeout support */
- irq = platform_get_irq_optional(pdev, 0);
-- if (irq > 0) {
-+ if (data->pretimeout && irq > 0) {
- ret = devm_request_irq(dev, irq, qcom_wdt_isr,
- IRQF_TRIGGER_RISING,
- "wdt_bark", &wdt->wdd);
-@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platfor
- wdt->wdd.min_timeout = 1;
- wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
- wdt->wdd.parent = dev;
-- wdt->layout = regs;
-+ wdt->layout = data->offset;
-
- if (readl(wdt_addr(wdt, WDT_STS)) & 1)
- wdt->wdd.bootstatus = WDIOF_CARDRESET;
-@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resum
- static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
-
- static const struct of_device_id qcom_wdt_of_table[] = {
-- { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
-- { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
-- { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
-+ { .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
-+ { .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
-+ { .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
- { },
- };
- MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
diff --git a/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
deleted file mode 100644
index 015a917e20..0000000000
--- a/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 1aec193ea41d672d11592714cdda8167eb3b38fc Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Wed, 18 Mar 2020 14:16:56 +0100
-Subject: ipq806x: gcc: Added the enable regs and mask for PRNG
-
-Kernel got hanged while reading from /dev/hwrng at the
-time of PRNG clock enable
-
-Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)"
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Link: https://lkml.kernel.org/r/20200318131657.345-1-ansuelsmth@gmail.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/qcom/gcc-ipq806x.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -1225,6 +1225,8 @@ static struct clk_rcg prng_src = {
- .parent_map = gcc_pxo_pll8_map,
- },
- .clkr = {
-+ .enable_reg = 0x2e80,
-+ .enable_mask = BIT(11),
- .hw.init = &(struct clk_init_data){
- .name = "prng_src",
- .parent_names = gcc_pxo_pll8,
diff --git a/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch
deleted file mode 100644
index a28570974e..0000000000
--- a/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From eec152734be10c72d2d413a27ca9d282c28cdb61 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 10 Mar 2020 15:37:56 +0100
-Subject: clk: qcom: clk-rpm: add missing rpm clk for ipq806x
-
-Add missing definition of rpm clk for ipq806x soc
-
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: John Crispin <john@phrozen.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
- drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 4 +++
- 3 files changed, 40 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -15,6 +15,7 @@ Required properties :
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
- "qcom,rpmcc-msm8974", "qcom,rpmcc"
- "qcom,rpmcc-apq8064", "qcom,rpmcc"
-+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
- "qcom,rpmcc-msm8996", "qcom,rpmcc"
- "qcom,rpmcc-msm8998", "qcom,rpmcc"
- "qcom,rpmcc-qcs404", "qcom,rpmcc"
---- a/drivers/clk/qcom/clk-rpm.c
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -543,10 +543,45 @@ static const struct rpm_clk_desc rpm_clk
- .num_clks = ARRAY_SIZE(apq8064_clks),
- };
-
-+/* ipq806x */
-+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
-+
-+static struct clk_rpm *ipq806x_clks[] = {
-+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
-+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
-+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
-+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
-+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
-+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
-+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
-+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
-+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
-+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
-+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
-+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
-+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
-+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
-+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
-+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
-+};
-+
-+static const struct rpm_clk_desc rpm_clk_ipq806x = {
-+ .clks = ipq806x_clks,
-+ .num_clks = ARRAY_SIZE(ipq806x_clks),
-+};
-+
- static const struct of_device_id rpm_clk_match_table[] = {
- { .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 },
- { .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 },
- { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
-+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
---- a/include/dt-bindings/clock/qcom,rpmcc.h
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -37,6 +37,10 @@
- #define RPM_XO_A0 27
- #define RPM_XO_A1 28
- #define RPM_XO_A2 29
-+#define RPM_NSS_FABRIC_0_CLK 30
-+#define RPM_NSS_FABRIC_0_A_CLK 31
-+#define RPM_NSS_FABRIC_1_CLK 32
-+#define RPM_NSS_FABRIC_1_A_CLK 33
-
- /* SMD RPM clocks */
- #define RPM_SMD_XO_CLK_SRC 0
diff --git a/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch
deleted file mode 100644
index 42a02865a3..0000000000
--- a/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From b5f25304aece9f2e7eaab275bbb5461c666bf38c Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 19 Feb 2020 17:37:11 +0100
-Subject: regulator: add smb208 support
-
-Smb208 regulators are used on some ipq806x soc.
-Add support for it to make it avaiable on some routers
-that use it.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-Acked-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
- drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
- 2 files changed, 13 insertions(+)
-
---- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-@@ -61,6 +61,7 @@ Regulator nodes are identified by their
- "qcom,rpm-pm8901-regulators"
- "qcom,rpm-pm8921-regulators"
- "qcom,rpm-pm8018-regulators"
-+ "qcom,rpm-smb208-regulators"
-
- - vdd_l0_l1_lvs-supply:
- - vdd_l2_l11_l12-supply:
-@@ -171,6 +172,9 @@ pm8018:
- s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
- l12, l14, lvs1
-
-+smb208:
-+ s1a, s1b, s2a, s2b
-+
- The content of each sub-node is defined by the standard binding for regulators -
- see regulator.txt - with additional custom properties described below:
-
---- a/drivers/regulator/qcom_rpm-regulator.c
-+++ b/drivers/regulator/qcom_rpm-regulator.c
-@@ -925,12 +925,21 @@ static const struct rpm_regulator_data r
- { }
- };
-
-+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
-+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
-+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
-+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
-+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
-+ { }
-+};
-+
- static const struct of_device_id rpm_of_match[] = {
- { .compatible = "qcom,rpm-pm8018-regulators",
- .data = &rpm_pm8018_regulators },
- { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
- { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
- { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
-+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch b/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch
deleted file mode 100644
index be20756a10..0000000000
--- a/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch
+++ /dev/null
@@ -1,361 +0,0 @@
-From a8811ec764f95a04ba82f6f457e28c5e9e36e36b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 13 Mar 2020 18:52:13 +0100
-Subject: cpufreq: qcom: Add support for krait based socs
-
-In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
-that has KRAIT processors the voltage/current value of each OPP
-varies based on the silicon variant in use.
-
-The required OPP related data is determined based on
-the efuse value. This is similar to the existing code for
-kryo cores. So adding support for krait cores here.
-
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
----
- .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
- drivers/cpufreq/Kconfig.arm | 2 +-
- drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 191 +++++++++++++++++++--
- 4 files changed, 183 insertions(+), 18 deletions(-)
-
---- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
-+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
-@@ -19,7 +19,8 @@ In 'cpu' nodes:
-
- In 'operating-points-v2' table:
- - compatible: Should be
-- - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
-+ - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
-+ apq8064, ipq8064, msm8960 and ipq8074.
-
- Optional properties:
- --------------------
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -135,7 +135,7 @@ config ARM_OMAP2PLUS_CPUFREQ
-
- config ARM_QCOM_CPUFREQ_NVMEM
- tristate "Qualcomm nvmem based CPUFreq"
-- depends on ARM64
-+ depends on ARCH_QCOM
- depends on QCOM_QFPROM
- depends on QCOM_SMEM
- select PM_OPP
---- a/drivers/cpufreq/cpufreq-dt-platdev.c
-+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
-@@ -138,6 +138,11 @@ static const struct of_device_id blackli
- { .compatible = "ti,am43", },
- { .compatible = "ti,dra7", },
-
-+ { .compatible = "qcom,ipq8064", },
-+ { .compatible = "qcom,apq8064", },
-+ { .compatible = "qcom,msm8974", },
-+ { .compatible = "qcom,msm8960", },
-+
- { }
- };
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -49,12 +49,14 @@ struct qcom_cpufreq_drv;
- struct qcom_cpufreq_match_data {
- int (*get_version)(struct device *cpu_dev,
- struct nvmem_cell *speedbin_nvmem,
-+ char **pvs_name,
- struct qcom_cpufreq_drv *drv);
- const char **genpd_names;
- };
-
- struct qcom_cpufreq_drv {
-- struct opp_table **opp_tables;
-+ struct opp_table **names_opp_tables;
-+ struct opp_table **hw_opp_tables;
- struct opp_table **genpd_opp_tables;
- u32 versions;
- const struct qcom_cpufreq_match_data *data;
-@@ -62,6 +64,84 @@ struct qcom_cpufreq_drv {
-
- static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
-
-+static void get_krait_bin_format_a(struct device *cpu_dev,
-+ int *speed, int *pvs, int *pvs_ver,
-+ struct nvmem_cell *pvs_nvmem, u8 *buf)
-+{
-+ u32 pte_efuse;
-+
-+ pte_efuse = *((u32 *)buf);
-+
-+ *speed = pte_efuse & 0xf;
-+ if (*speed == 0xf)
-+ *speed = (pte_efuse >> 4) & 0xf;
-+
-+ if (*speed == 0xf) {
-+ *speed = 0;
-+ dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed);
-+ } else {
-+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
-+ }
-+
-+ *pvs = (pte_efuse >> 10) & 0x7;
-+ if (*pvs == 0x7)
-+ *pvs = (pte_efuse >> 13) & 0x7;
-+
-+ if (*pvs == 0x7) {
-+ *pvs = 0;
-+ dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs);
-+ } else {
-+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
-+ }
-+}
-+
-+static void get_krait_bin_format_b(struct device *cpu_dev,
-+ int *speed, int *pvs, int *pvs_ver,
-+ struct nvmem_cell *pvs_nvmem, u8 *buf)
-+{
-+ u32 pte_efuse, redundant_sel;
-+
-+ pte_efuse = *((u32 *)buf);
-+ redundant_sel = (pte_efuse >> 24) & 0x7;
-+
-+ *pvs_ver = (pte_efuse >> 4) & 0x3;
-+
-+ switch (redundant_sel) {
-+ case 1:
-+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
-+ *speed = (pte_efuse >> 27) & 0xf;
-+ break;
-+ case 2:
-+ *pvs = (pte_efuse >> 27) & 0xf;
-+ *speed = pte_efuse & 0x7;
-+ break;
-+ default:
-+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
-+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
-+ *speed = pte_efuse & 0x7;
-+ }
-+
-+ /* Check SPEED_BIN_BLOW_STATUS */
-+ if (pte_efuse & BIT(3)) {
-+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
-+ } else {
-+ dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n");
-+ *speed = 0;
-+ }
-+
-+ /* Check PVS_BLOW_STATUS */
-+ pte_efuse = *(((u32 *)buf) + 4);
-+ pte_efuse &= BIT(21);
-+ if (pte_efuse) {
-+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
-+ } else {
-+ dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n");
-+ *pvs = 0;
-+ }
-+
-+ dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
-+}
-+
- static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
- {
- size_t len;
-@@ -93,11 +173,13 @@ static enum _msm8996_version qcom_cpufre
-
- static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
- struct nvmem_cell *speedbin_nvmem,
-+ char **pvs_name,
- struct qcom_cpufreq_drv *drv)
- {
- size_t len;
- u8 *speedbin;
- enum _msm8996_version msm8996_version;
-+ *pvs_name = NULL;
-
- msm8996_version = qcom_cpufreq_get_msm_id();
- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-@@ -125,10 +207,51 @@ static int qcom_cpufreq_kryo_name_versio
- return 0;
- }
-
-+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
-+ struct nvmem_cell *speedbin_nvmem,
-+ char **pvs_name,
-+ struct qcom_cpufreq_drv *drv)
-+{
-+ int speed = 0, pvs = 0, pvs_ver = 0;
-+ u8 *speedbin;
-+ size_t len;
-+
-+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
-+
-+ if (IS_ERR(speedbin))
-+ return PTR_ERR(speedbin);
-+
-+ switch (len) {
-+ case 4:
-+ get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver,
-+ speedbin_nvmem, speedbin);
-+ break;
-+ case 8:
-+ get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver,
-+ speedbin_nvmem, speedbin);
-+ break;
-+ default:
-+ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
-+ return -ENODEV;
-+ }
-+
-+ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
-+ speed, pvs, pvs_ver);
-+
-+ drv->versions = (1 << speed);
-+
-+ kfree(speedbin);
-+ return 0;
-+}
-+
- static const struct qcom_cpufreq_match_data match_data_kryo = {
- .get_version = qcom_cpufreq_kryo_name_version,
- };
-
-+static const struct qcom_cpufreq_match_data match_data_krait = {
-+ .get_version = qcom_cpufreq_krait_name_version,
-+};
-+
- static const char *qcs404_genpd_names[] = { "cpr", NULL };
-
- static const struct qcom_cpufreq_match_data match_data_qcs404 = {
-@@ -141,6 +264,7 @@ static int qcom_cpufreq_probe(struct pla
- struct nvmem_cell *speedbin_nvmem;
- struct device_node *np;
- struct device *cpu_dev;
-+ char *pvs_name = "speedXX-pvsXX-vXX";
- unsigned cpu;
- const struct of_device_id *match;
- int ret;
-@@ -153,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla
- if (!np)
- return -ENOENT;
-
-- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
-+ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
- if (!ret) {
- of_node_put(np);
- return -ENOENT;
-@@ -181,7 +305,8 @@ static int qcom_cpufreq_probe(struct pla
- goto free_drv;
- }
-
-- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
-+ ret = drv->data->get_version(cpu_dev,
-+ speedbin_nvmem, &pvs_name, drv);
- if (ret) {
- nvmem_cell_put(speedbin_nvmem);
- goto free_drv;
-@@ -190,12 +315,20 @@ static int qcom_cpufreq_probe(struct pla
- }
- of_node_put(np);
-
-- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
-+ drv->names_opp_tables = kcalloc(num_possible_cpus(),
-+ sizeof(*drv->names_opp_tables),
- GFP_KERNEL);
-- if (!drv->opp_tables) {
-+ if (!drv->names_opp_tables) {
- ret = -ENOMEM;
- goto free_drv;
- }
-+ drv->hw_opp_tables = kcalloc(num_possible_cpus(),
-+ sizeof(*drv->hw_opp_tables),
-+ GFP_KERNEL);
-+ if (!drv->hw_opp_tables) {
-+ ret = -ENOMEM;
-+ goto free_opp_names;
-+ }
-
- drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
- sizeof(*drv->genpd_opp_tables),
-@@ -213,11 +346,23 @@ static int qcom_cpufreq_probe(struct pla
- }
-
- if (drv->data->get_version) {
-- drv->opp_tables[cpu] =
-- dev_pm_opp_set_supported_hw(cpu_dev,
-- &drv->versions, 1);
-- if (IS_ERR(drv->opp_tables[cpu])) {
-- ret = PTR_ERR(drv->opp_tables[cpu]);
-+
-+ if (pvs_name) {
-+ drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
-+ cpu_dev,
-+ pvs_name);
-+ if (IS_ERR(drv->names_opp_tables[cpu])) {
-+ ret = PTR_ERR(drv->names_opp_tables[cpu]);
-+ dev_err(cpu_dev, "Failed to add OPP name %s\n",
-+ pvs_name);
-+ goto free_opp;
-+ }
-+ }
-+
-+ drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
-+ cpu_dev, &drv->versions, 1);
-+ if (IS_ERR(drv->hw_opp_tables[cpu])) {
-+ ret = PTR_ERR(drv->hw_opp_tables[cpu]);
- dev_err(cpu_dev,
- "Failed to set supported hardware\n");
- goto free_genpd_opp;
-@@ -259,11 +404,18 @@ free_genpd_opp:
- kfree(drv->genpd_opp_tables);
- free_opp:
- for_each_possible_cpu(cpu) {
-- if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
-+ if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu]))
-+ break;
-+ dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
-+ }
-+ for_each_possible_cpu(cpu) {
-+ if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu]))
- break;
-- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
-+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
- }
-- kfree(drv->opp_tables);
-+ kfree(drv->hw_opp_tables);
-+free_opp_names:
-+ kfree(drv->names_opp_tables);
- free_drv:
- kfree(drv);
-
-@@ -278,13 +430,16 @@ static int qcom_cpufreq_remove(struct pl
- platform_device_unregister(cpufreq_dt_pdev);
-
- for_each_possible_cpu(cpu) {
-- if (drv->opp_tables[cpu])
-- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
-+ if (drv->names_opp_tables[cpu])
-+ dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
-+ if (drv->hw_opp_tables[cpu])
-+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
- if (drv->genpd_opp_tables[cpu])
- dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
- }
-
-- kfree(drv->opp_tables);
-+ kfree(drv->names_opp_tables);
-+ kfree(drv->hw_opp_tables);
- kfree(drv->genpd_opp_tables);
- kfree(drv);
-
-@@ -303,6 +458,10 @@ static const struct of_device_id qcom_cp
- { .compatible = "qcom,apq8096", .data = &match_data_kryo },
- { .compatible = "qcom,msm8996", .data = &match_data_kryo },
- { .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
-+ { .compatible = "qcom,ipq8064", .data = &match_data_krait },
-+ { .compatible = "qcom,apq8064", .data = &match_data_krait },
-+ { .compatible = "qcom,msm8974", .data = &match_data_krait },
-+ { .compatible = "qcom,msm8960", .data = &match_data_krait },
- {},
- };
- MODULE_DEVICE_TABLE(of, qcom_cpufreq_match_list);
diff --git a/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch b/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch
deleted file mode 100644
index 764a917c1f..0000000000
--- a/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 2dea651680cea1f3a29925de51002f33d1f55711 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 1 May 2020 00:22:25 +0200
-Subject: cpufreq: qcom: fix wrong compatible binding
-
-Binding in Documentation is still "operating-points-v2-kryo-cpu".
-Restore the old binding to fix the compatibility problem.
-
-Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla
- if (!np)
- return -ENOENT;
-
-- ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
-+ ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
- if (!ret) {
- of_node_put(np);
- return -ENOENT;
diff --git a/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
deleted file mode 100644
index 95531508b6..0000000000
--- a/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
+++ /dev/null
@@ -1,228 +0,0 @@
-From 6a114526af4689938863bf34976c83bfd279f517 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 15 Jun 2020 23:06:02 +0200
-Subject: PCI: qcom: Use bulk clk api and assert on error
-
-Rework 2.1.0 revision to use bulk clk api and fix missing assert on
-reset_control_deassert error.
-
-Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
----
- drivers/pci/controller/dwc/pcie-qcom.c | 131 ++++++++++++---------------------
- 1 file changed, 46 insertions(+), 85 deletions(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -99,12 +99,9 @@
- #define SLV_ADDR_SPACE_SZ 0x10000000
-
- #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
-+#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
- struct qcom_pcie_resources_2_1_0 {
-- struct clk *iface_clk;
-- struct clk *core_clk;
-- struct clk *phy_clk;
-- struct clk *aux_clk;
-- struct clk *ref_clk;
-+ struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
-@@ -244,25 +241,21 @@ static int qcom_pcie_get_resources_2_1_0
- if (ret)
- return ret;
-
-- res->iface_clk = devm_clk_get(dev, "iface");
-- if (IS_ERR(res->iface_clk))
-- return PTR_ERR(res->iface_clk);
--
-- res->core_clk = devm_clk_get(dev, "core");
-- if (IS_ERR(res->core_clk))
-- return PTR_ERR(res->core_clk);
--
-- res->phy_clk = devm_clk_get(dev, "phy");
-- if (IS_ERR(res->phy_clk))
-- return PTR_ERR(res->phy_clk);
--
-- res->aux_clk = devm_clk_get_optional(dev, "aux");
-- if (IS_ERR(res->aux_clk))
-- return PTR_ERR(res->aux_clk);
--
-- res->ref_clk = devm_clk_get_optional(dev, "ref");
-- if (IS_ERR(res->ref_clk))
-- return PTR_ERR(res->ref_clk);
-+ res->clks[0].id = "iface";
-+ res->clks[1].id = "core";
-+ res->clks[2].id = "phy";
-+ res->clks[3].id = "aux";
-+ res->clks[4].id = "ref";
-+
-+ /* iface, core, phy are required */
-+ ret = devm_clk_bulk_get(dev, 3, res->clks);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* aux, ref are optional */
-+ ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3);
-+ if (ret < 0)
-+ return ret;
-
- res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
- if (IS_ERR(res->pci_reset))
-@@ -292,17 +285,13 @@ static void qcom_pcie_deinit_2_1_0(struc
- {
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
-- clk_disable_unprepare(res->phy_clk);
-+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
- reset_control_assert(res->ext_reset);
- reset_control_assert(res->phy_reset);
-- clk_disable_unprepare(res->iface_clk);
-- clk_disable_unprepare(res->core_clk);
-- clk_disable_unprepare(res->aux_clk);
-- clk_disable_unprepare(res->ref_clk);
-
- writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
-@@ -334,47 +323,45 @@ static int qcom_pcie_init_2_1_0(struct q
- return ret;
- }
-
-- ret = reset_control_assert(res->ahb_reset);
-+ ret = reset_control_deassert(res->ahb_reset);
- if (ret) {
-- dev_err(dev, "cannot assert ahb reset\n");
-- goto err_assert_ahb;
-+ dev_err(dev, "cannot deassert ahb reset\n");
-+ goto err_deassert_ahb;
- }
-
-- ret = clk_prepare_enable(res->iface_clk);
-+ ret = reset_control_deassert(res->ext_reset);
- if (ret) {
-- dev_err(dev, "cannot prepare/enable iface clock\n");
-- goto err_assert_ahb;
-+ dev_err(dev, "cannot deassert ext reset\n");
-+ goto err_deassert_ext;
- }
-
-- ret = clk_prepare_enable(res->core_clk);
-+ ret = reset_control_deassert(res->phy_reset);
- if (ret) {
-- dev_err(dev, "cannot prepare/enable core clock\n");
-- goto err_clk_core;
-+ dev_err(dev, "cannot deassert phy reset\n");
-+ goto err_deassert_phy;
- }
-
-- ret = clk_prepare_enable(res->aux_clk);
-+ ret = reset_control_deassert(res->pci_reset);
- if (ret) {
-- dev_err(dev, "cannot prepare/enable aux clock\n");
-- goto err_clk_aux;
-+ dev_err(dev, "cannot deassert pci reset\n");
-+ goto err_deassert_pci;
- }
-
-- ret = clk_prepare_enable(res->ref_clk);
-+ ret = reset_control_deassert(res->por_reset);
- if (ret) {
-- dev_err(dev, "cannot prepare/enable ref clock\n");
-- goto err_clk_ref;
-+ dev_err(dev, "cannot deassert por reset\n");
-+ goto err_deassert_por;
- }
-
-- ret = reset_control_deassert(res->ahb_reset);
-+ ret = reset_control_deassert(res->axi_reset);
- if (ret) {
-- dev_err(dev, "cannot deassert ahb reset\n");
-- goto err_deassert_ahb;
-+ dev_err(dev, "cannot deassert axi reset\n");
-+ goto err_deassert_axi;
- }
-
-- ret = reset_control_deassert(res->ext_reset);
-- if (ret) {
-- dev_err(dev, "cannot deassert ext reset\n");
-- goto err_deassert_ahb;
-- }
-+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
-+ if (ret)
-+ goto err_clks;
-
- /* enable PCIe clocks and resets */
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-@@ -406,36 +393,6 @@ static int qcom_pcie_init_2_1_0(struct q
- val |= PHY_REFCLK_SSP_EN;
- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
-
-- ret = reset_control_deassert(res->phy_reset);
-- if (ret) {
-- dev_err(dev, "cannot deassert phy reset\n");
-- return ret;
-- }
--
-- ret = reset_control_deassert(res->pci_reset);
-- if (ret) {
-- dev_err(dev, "cannot deassert pci reset\n");
-- return ret;
-- }
--
-- ret = reset_control_deassert(res->por_reset);
-- if (ret) {
-- dev_err(dev, "cannot deassert por reset\n");
-- return ret;
-- }
--
-- ret = reset_control_deassert(res->axi_reset);
-- if (ret) {
-- dev_err(dev, "cannot deassert axi reset\n");
-- return ret;
-- }
--
-- ret = clk_prepare_enable(res->phy_clk);
-- if (ret) {
-- dev_err(dev, "cannot prepare/enable phy clock\n");
-- goto err_deassert_ahb;
-- }
--
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
-
-@@ -448,15 +405,19 @@ static int qcom_pcie_init_2_1_0(struct q
-
- return 0;
-
-+err_clks:
-+ reset_control_assert(res->axi_reset);
-+err_deassert_axi:
-+ reset_control_assert(res->por_reset);
-+err_deassert_por:
-+ reset_control_assert(res->pci_reset);
-+err_deassert_pci:
-+ reset_control_assert(res->phy_reset);
-+err_deassert_phy:
-+ reset_control_assert(res->ext_reset);
-+err_deassert_ext:
-+ reset_control_assert(res->ahb_reset);
- err_deassert_ahb:
-- clk_disable_unprepare(res->ref_clk);
--err_clk_ref:
-- clk_disable_unprepare(res->aux_clk);
--err_clk_aux:
-- clk_disable_unprepare(res->core_clk);
--err_clk_core:
-- clk_disable_unprepare(res->iface_clk);
--err_assert_ahb:
- regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
- return ret;
diff --git a/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch b/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
deleted file mode 100644
index c3d61f164c..0000000000
--- a/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8df093fe2ae1717389df0dcdc620c02cc35abb21 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 15 Jun 2020 23:06:05 +0200
-Subject: PCI: qcom: Add ipq8064 rev2 variant
-
-Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
-different offset based on the revision.
-
-Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
----
- drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -368,7 +368,8 @@ static int qcom_pcie_init_2_1_0(struct q
- val &= ~BIT(0);
- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
-- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
-+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") ||
-+ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
- writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
- PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
- PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
-@@ -1328,6 +1329,7 @@ err_pm_runtime_put:
- static const struct of_device_id qcom_pcie_match[] = {
- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
-+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
- { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
- { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
- { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
diff --git a/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch b/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
deleted file mode 100644
index 02ac7460e8..0000000000
--- a/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 51ed2c2b60265006bde7531d10993cf24def0aee Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Mon, 15 Jun 2020 23:06:07 +0200
-Subject: PCI: qcom: Support pci speed set for ipq806x
-
-Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to
-some hardware limitations. Add support for speed setting defined by the
-max-link-speed binding. If not defined the max speed is set to GEN2 by
-default.
-
-Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
----
-
-Backported with light changes:
-* One include is missing in kernel 5.4
-
- drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/pci/controller/dwc/pcie-qcom.c
-+++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -27,6 +27,7 @@
- #include <linux/slab.h>
- #include <linux/types.h>
-
-+#include "../../pci.h"
- #include "pcie-designware.h"
-
- #define PCIE20_PARF_SYS_CTRL 0x00
-@@ -98,6 +99,8 @@
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
- #define SLV_ADDR_SPACE_SZ 0x10000000
-
-+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0
-+
- #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
- #define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
- struct qcom_pcie_resources_2_1_0 {
-@@ -184,6 +187,7 @@ struct qcom_pcie {
- struct phy *phy;
- struct gpio_desc *reset;
- const struct qcom_pcie_ops *ops;
-+ int gen;
- };
-
- #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-@@ -397,6 +401,11 @@ static int qcom_pcie_init_2_1_0(struct q
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
-
-+ if (pcie->gen == 1) {
-+ val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
-+ val |= PCI_EXP_LNKSTA_CLS_2_5GB;
-+ writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
-+ }
-
- /* Set the Max TLP size to 2K, instead of using default of 4K */
- writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
-@@ -1261,6 +1270,10 @@ static int qcom_pcie_probe(struct platfo
- goto err_pm_runtime_put;
- }
-
-+ pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node);
-+ if (pcie->gen < 0)
-+ pcie->gen = 2;
-+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
- pcie->parf = devm_ioremap_resource(dev, res);
- if (IS_ERR(pcie->parf)) {
diff --git a/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch b/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch
deleted file mode 100644
index 328942dad9..0000000000
--- a/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From caaa71fac36ec8c19145dbf8262a9b77ab09f1a1 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 4 Mar 2020 22:38:32 +0100
-Subject: net: mdio: add ipq8064 mdio driver
-
-Currently ipq806x soc use generic bitbang driver to
-comunicate with the gmac ethernet interface.
-Add a dedicated driver created by chunkeey to fix this.
-
-Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig | 8 ++
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/mdio-ipq8064.c | 166 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 175 insertions(+)
- create mode 100644 drivers/net/phy/mdio-ipq8064.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -156,6 +156,14 @@ config MDIO_I2C
-
- This is library mode.
-
-+config MDIO_IPQ8064
-+ tristate "Qualcomm IPQ8064 MDIO interface support"
-+ depends on HAS_IOMEM && OF_MDIO
-+ depends on MFD_SYSCON
-+ help
-+ This driver supports the MDIO interface found in the network
-+ interface units of the IPQ8064 SoC
-+
- config MDIO_MOXART
- tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART || COMPILE_TEST
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
- obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
- obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
-+obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
- obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
- obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
---- /dev/null
-+++ b/drivers/net/phy/mdio-ipq8064.c
-@@ -0,0 +1,166 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Qualcomm IPQ8064 MDIO interface driver
-+ *
-+ * Copyright (C) 2019 Christian Lamparter <chunkeey@gmail.com>
-+ * Copyright (C) 2020 Ansuel Smith <ansuelsmth@gmail.com>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/regmap.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd/syscon.h>
-+
-+/* MII address register definitions */
-+#define MII_ADDR_REG_ADDR 0x10
-+#define MII_BUSY BIT(0)
-+#define MII_WRITE BIT(1)
-+#define MII_CLKRANGE_60_100M (0 << 2)
-+#define MII_CLKRANGE_100_150M (1 << 2)
-+#define MII_CLKRANGE_20_35M (2 << 2)
-+#define MII_CLKRANGE_35_60M (3 << 2)
-+#define MII_CLKRANGE_150_250M (4 << 2)
-+#define MII_CLKRANGE_250_300M (5 << 2)
-+#define MII_CLKRANGE_MASK GENMASK(4, 2)
-+#define MII_REG_SHIFT 6
-+#define MII_REG_MASK GENMASK(10, 6)
-+#define MII_ADDR_SHIFT 11
-+#define MII_ADDR_MASK GENMASK(15, 11)
-+
-+#define MII_DATA_REG_ADDR 0x14
-+
-+#define MII_MDIO_DELAY_USEC (1000)
-+#define MII_MDIO_RETRY_MSEC (10)
-+
-+struct ipq8064_mdio {
-+ struct regmap *base; /* NSS_GMAC0_BASE */
-+};
-+
-+static int
-+ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv)
-+{
-+ u32 busy;
-+
-+ return regmap_read_poll_timeout(priv->base, MII_ADDR_REG_ADDR, busy,
-+ !(busy & MII_BUSY), MII_MDIO_DELAY_USEC,
-+ MII_MDIO_RETRY_MSEC * USEC_PER_MSEC);
-+}
-+
-+static int
-+ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
-+{
-+ u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
-+ struct ipq8064_mdio *priv = bus->priv;
-+ u32 ret_val;
-+ int err;
-+
-+ /* Reject clause 45 */
-+ if (reg_offset & MII_ADDR_C45)
-+ return -EOPNOTSUPP;
-+
-+ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
-+ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
-+
-+ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
-+ usleep_range(8, 10);
-+
-+ err = ipq8064_mdio_wait_busy(priv);
-+ if (err)
-+ return err;
-+
-+ regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
-+ return (int)ret_val;
-+}
-+
-+static int
-+ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
-+{
-+ u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;
-+ struct ipq8064_mdio *priv = bus->priv;
-+
-+ /* Reject clause 45 */
-+ if (reg_offset & MII_ADDR_C45)
-+ return -EOPNOTSUPP;
-+
-+ regmap_write(priv->base, MII_DATA_REG_ADDR, data);
-+
-+ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
-+ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
-+
-+ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
-+ usleep_range(8, 10);
-+
-+ return ipq8064_mdio_wait_busy(priv);
-+}
-+
-+static int
-+ipq8064_mdio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct ipq8064_mdio *priv;
-+ struct mii_bus *bus;
-+ int ret;
-+
-+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
-+ if (!bus)
-+ return -ENOMEM;
-+
-+ bus->name = "ipq8064_mdio_bus";
-+ bus->read = ipq8064_mdio_read;
-+ bus->write = ipq8064_mdio_write;
-+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
-+ bus->parent = &pdev->dev;
-+
-+ priv = bus->priv;
-+ priv->base = device_node_to_regmap(np);
-+ if (IS_ERR(priv->base)) {
-+ if (priv->base == ERR_PTR(-EPROBE_DEFER))
-+ return -EPROBE_DEFER;
-+
-+ dev_err(&pdev->dev, "error getting device regmap, error=%pe\n",
-+ priv->base);
-+ return PTR_ERR(priv->base);
-+ }
-+
-+ ret = of_mdiobus_register(bus, np);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, bus);
-+ return 0;
-+}
-+
-+static int
-+ipq8064_mdio_remove(struct platform_device *pdev)
-+{
-+ struct mii_bus *bus = platform_get_drvdata(pdev);
-+
-+ mdiobus_unregister(bus);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ipq8064_mdio_dt_ids[] = {
-+ { .compatible = "qcom,ipq8064-mdio" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids);
-+
-+static struct platform_driver ipq8064_mdio_driver = {
-+ .probe = ipq8064_mdio_probe,
-+ .remove = ipq8064_mdio_remove,
-+ .driver = {
-+ .name = "ipq8064-mdio",
-+ .of_match_table = ipq8064_mdio_dt_ids,
-+ },
-+};
-+
-+module_platform_driver(ipq8064_mdio_driver);
-+
-+MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver");
-+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
-+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch b/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch
deleted file mode 100644
index 47dc455715..0000000000
--- a/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch
+++ /dev/null
@@ -1,621 +0,0 @@
-From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 17 Jul 2020 15:16:31 +0200
-Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver
-
-This has lost in the original push for the dwc3 qcom driver.
-This is needed for ipq806x SoC as without this the usb ports
-doesn't work at all.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Tested-by: Jonathan McDowell <noodles@earth.li>
-Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
-
-Light modification to Kconfig as some config are missing in kernel 5.4
-
- drivers/phy/qualcomm/Kconfig | 10 +
- drivers/phy/qualcomm/Makefile | 1 +
- drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++
- 3 files changed, 582 insertions(+)
- create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-+
-+config PHY_QCOM_IPQ806X_USB
-+ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
-+ depends on HAS_IOMEM
-+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
-+ select GENERIC_PHY
-+ help
-+ This option enables support for the Synopsis PHYs present inside the
-+ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
-+ both HS and SS PHY controllers.
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-
- obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
- obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
- obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
-@@ -0,0 +1,571 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+#include <linux/mfd/syscon.h>
-+
-+/* USB QSCRATCH Hardware registers */
-+#define QSCRATCH_GENERAL_CFG (0x08)
-+#define HSUSB_PHY_CTRL_REG (0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
-+#define HSUSB_CTRL_COMMONONN BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN BIT(7)
-+#define HSUSB_CTRL_RETENABLEN BIT(1)
-+#define HSUSB_CTRL_POR BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV BIT(2)
-+
-+/* USB QSCRATCH Hardware registers */
-+#define SSUSB_PHY_CTRL_REG (0x00)
-+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
-+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
-+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
-+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
-+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
-+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
-+#define CR_PROTOCOL_READ_REG (0x1c)
-+#define CR_PROTOCOL_WRITE_REG (0x20)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
-+
-+/* SSPHY control registers - Does this need 0x30? */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
-+
-+/* SSPHY SoC version specific values */
-+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
-+/* Override value for transmit preemphasis */
-+#define SSPHY_TX_DEEMPH_3_5DB 23
-+/* Override value for mpll */
-+#define SSPHY_MPLL_VALUE 0
-+
-+/* QSCRATCH PHY_PARAM_CTRL1 fields */
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
-+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
-+
-+#define PHY_PARAM_CTRL1_MASK \
-+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
-+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
-+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
-+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
-+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
-+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
-+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
-+#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
-+#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
-+#define TX_OVRD_DRV_LO_EN BIT(14)
-+
-+/* MPLL bits */
-+#define SSPHY_MPLL_MASK GENMASK(8, 5)
-+#define SSPHY_MPLL(x) ((x) << 5)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG BIT(0)
-+#define SS_CR_CAP_DATA_REG BIT(0)
-+#define SS_CR_READ_REG BIT(0)
-+#define SS_CR_WRITE_REG BIT(0)
-+
-+struct usb_phy {
-+ void __iomem *base;
-+ struct device *dev;
-+ struct clk *xo_clk;
-+ struct clk *ref_clk;
-+ u32 rx_eq;
-+ u32 tx_deamp_3_5db;
-+ u32 mpll;
-+};
-+
-+struct phy_drvdata {
-+ struct phy_ops ops;
-+ u32 clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
-+ u32 offset,
-+ const u32 mask, u32 val)
-+{
-+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
-+
-+ tmp &= ~mask; /* retain other bits */
-+ write_val = tmp | val;
-+
-+ writel(write_val, phy_dwc3->base + offset);
-+
-+ /* Read back to see if val was written */
-+ tmp = readl(phy_dwc3->base + offset);
-+ tmp &= mask; /* clear other bits */
-+
-+ if (tmp != val)
-+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
-+}
-+
-+static int wait_for_latch(void __iomem *addr)
-+{
-+ u32 retry = 10;
-+
-+ while (true) {
-+ if (!readl(addr))
-+ break;
-+
-+ if (--retry == 0)
-+ return -ETIMEDOUT;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
-+ u32 addr, u32 val)
-+{
-+ int ret;
-+
-+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG,
-+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_DATA_REG,
-+ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+ if (ret)
-+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+ return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
-+ u32 addr, u32 *val)
-+{
-+ int ret;
-+
-+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG,
-+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /*
-+ * Due to hardware bug, first read of SSPHY register might be
-+ * incorrect. Hence as workaround, SW should perform SSPHY register
-+ * read twice, but use only second read and ignore first read.
-+ */
-+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /* throwaway read */
-+ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+err_wait:
-+ return ret;
-+}
-+
-+static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
-+{
-+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 val;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /*
-+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+ */
-+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
-+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+ /* use core clock if external reference is not present */
-+ if (!phy_dwc3->xo_clk)
-+ val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+
-+ /* Disable (bypass) VBUS and ID filters */
-+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
-+
-+ return 0;
-+}
-+
-+static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
-+{
-+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
-+{
-+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 data;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /* reset phy */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
-+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* clear REF_PAD if we don't have XO clk */
-+ if (!phy_dwc3->xo_clk)
-+ data &= ~SSUSB_CTRL_REF_USE_PAD;
-+ else
-+ data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* wait for ref clk to become stable, this can take up to 30ms */
-+ msleep(30);
-+
-+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /*
-+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
-+ * in HS mode instead of SS mode. Workaround it by asserting
-+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
-+ */
-+ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data |= (1 << 7);
-+ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~0xff0;
-+ data |= 0x20;
-+ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Fix RX Equalization setting as follows
-+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+ */
-+ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
-+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+ ret = usb_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set EQ and TX launch amplitudes as follows
-+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
-+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
-+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+ */
-+ ret = usb_ss_read_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
-+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+ data |= 0x6E;
-+ data |= TX_OVRD_DRV_LO_EN;
-+ ret = usb_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data = 0;
-+ data &= ~SSPHY_MPLL_MASK;
-+ data |= SSPHY_MPLL(phy_dwc3->mpll);
-+ usb_ss_write_phycreg(phy_dwc3, 0x30, data);
-+
-+ /*
-+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+ * TX_FULL_SWING [26:20] amplitude to 110
-+ * TX_DEEMPH_6DB [19:14] to 32
-+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
-+ * LOS_BIAS [7:3] to 9
-+ */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
-+
-+ data &= ~PHY_PARAM_CTRL1_MASK;
-+
-+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
-+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
-+
-+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+ PHY_PARAM_CTRL1_MASK, data);
-+
-+err_phy_trans:
-+ return ret;
-+}
-+
-+static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
-+{
-+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ /* Sequence to put SSPHY in low power state:
-+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+ */
-+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_SS_PHY_EN, 0x0);
-+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_REF_USE_PAD, 0x0);
-+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
-+ .ops = {
-+ .init = qcom_ipq806x_usb_hs_phy_init,
-+ .exit = qcom_ipq806x_usb_hs_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 60000000,
-+};
-+
-+static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
-+ .ops = {
-+ .init = qcom_ipq806x_usb_ss_phy_init,
-+ .exit = qcom_ipq806x_usb_ss_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
-+ { .compatible = "qcom,ipq806x-usb-phy-hs",
-+ .data = &qcom_ipq806x_usb_hs_drvdata },
-+ { .compatible = "qcom,ipq806x-usb-phy-ss",
-+ .data = &qcom_ipq806x_usb_ss_drvdata },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
-+
-+static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ resource_size_t size;
-+ struct phy *generic_phy;
-+ struct usb_phy *phy_dwc3;
-+ const struct phy_drvdata *data;
-+ struct phy_provider *phy_provider;
-+
-+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+ if (!phy_dwc3)
-+ return -ENOMEM;
-+
-+ data = of_device_get_match_data(&pdev->dev);
-+
-+ phy_dwc3->dev = &pdev->dev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -EINVAL;
-+ size = resource_size(res);
-+ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
-+
-+ if (IS_ERR(phy_dwc3->base)) {
-+ dev_err(phy_dwc3->dev, "failed to map reg\n");
-+ return PTR_ERR(phy_dwc3->base);
-+ }
-+
-+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+ if (IS_ERR(phy_dwc3->ref_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+ return PTR_ERR(phy_dwc3->ref_clk);
-+ }
-+
-+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+ if (IS_ERR(phy_dwc3->xo_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+ phy_dwc3->xo_clk = NULL;
-+ }
-+
-+ /* Parse device node to probe HSIO settings */
-+ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
-+ &phy_dwc3->rx_eq))
-+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
-+
-+ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
-+ &phy_dwc3->tx_deamp_3_5db))
-+ phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
-+
-+ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
-+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
-+
-+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
-+
-+ if (IS_ERR(generic_phy))
-+ return PTR_ERR(generic_phy);
-+
-+ phy_set_drvdata(generic_phy, phy_dwc3);
-+ platform_set_drvdata(pdev, phy_dwc3);
-+
-+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+ of_phy_simple_xlate);
-+
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_ipq806x_usb_phy_driver = {
-+ .probe = qcom_ipq806x_usb_phy_probe,
-+ .driver = {
-+ .name = "qcom-ipq806x-usb-phy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qcom_ipq806x_usb_phy_table,
-+ },
-+};
-+
-+module_platform_driver(qcom_ipq806x_usb_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch b/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch
deleted file mode 100644
index dedbb51049..0000000000
--- a/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3d7b0ca5300bd01b176f2b4c10e173db802560d8 Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 21 Jul 2020 16:06:13 +0100
-Subject: phy: qualcomm: fix setting of tx_deamp_3_5db when device property
- read fails
-
-Currently when reading of the device property for "qcom,tx-deamp_3_5db"
-fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This
-looks like a copy-n-paste error and in fact should be assigning the
-default instead to phy_dwc3->tx_deamp_3_5db
-
-Addresses-Coverity: ("Copy-paste error")
-Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
-@@ -531,7 +531,7 @@ static int qcom_ipq806x_usb_phy_probe(st
-
- if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
- &phy_dwc3->tx_deamp_3_5db))
-- phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
-+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
-
- if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
- phy_dwc3->mpll = SSPHY_MPLL_VALUE;