aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ramips/mt7620/config-4.14235
-rw-r--r--target/linux/ramips/patches-4.14/0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch45
-rw-r--r--target/linux/ramips/patches-4.14/0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch32
-rw-r--r--target/linux/ramips/patches-4.14/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch45
-rw-r--r--target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch861
-rw-r--r--target/linux/ramips/patches-4.14/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch82
-rw-r--r--target/linux/ramips/patches-4.14/0006-MIPS-ralink-add-cpu-frequency-scaling.patch200
-rw-r--r--target/linux/ramips/patches-4.14/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch21
-rw-r--r--target/linux/ramips/patches-4.14/0009-PCI-MIPS-enable-PCIe-on-MT7688.patch28
-rw-r--r--target/linux/ramips/patches-4.14/0013-owrt-hack-fix-mt7688-cache-issue.patch28
-rw-r--r--target/linux/ramips/patches-4.14/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch25
-rw-r--r--target/linux/ramips/patches-4.14/0024-GPIO-add-named-gpio-exports.patch165
-rw-r--r--target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch524
-rw-r--r--target/linux/ramips/patches-4.14/0026-DT-Add-documentation-for-gpio-ralink.patch59
-rw-r--r--target/linux/ramips/patches-4.14/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch430
-rw-r--r--target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch405
-rw-r--r--target/linux/ramips/patches-4.14/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch44
-rw-r--r--target/linux/ramips/patches-4.14/0031-uvc-add-iPassion-iP2970-support.patch246
-rw-r--r--target/linux/ramips/patches-4.14/0034-NET-multi-phy-support.patch59
-rw-r--r--target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch70
-rw-r--r--target/linux/ramips/patches-4.14/0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch67
-rw-r--r--target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch4437
-rw-r--r--target/linux/ramips/patches-4.14/0040-nand-hack.patch32
-rw-r--r--target/linux/ramips/patches-4.14/0041-DT-Add-documentation-for-spi-rt2880.patch44
-rw-r--r--target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch574
-rw-r--r--target/linux/ramips/patches-4.14/0043-spi-add-mt7621-support.patch487
-rw-r--r--target/linux/ramips/patches-4.14/0044-i2c-MIPS-adds-ralink-I2C-driver.patch507
-rw-r--r--target/linux/ramips/patches-4.14/0045-i2c-add-mt7621-driver.patch473
-rw-r--r--target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch43
-rw-r--r--target/linux/ramips/patches-4.14/0047-DMA-ralink-add-rt2880-dma-engine.patch1757
-rw-r--r--target/linux/ramips/patches-4.14/0048-asoc-add-mt7620-support.patch1046
-rw-r--r--target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch22
-rw-r--r--target/linux/ramips/patches-4.14/0052-pwm-add-mediatek-support.patch217
-rw-r--r--target/linux/ramips/patches-4.14/0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch214
-rw-r--r--target/linux/ramips/patches-4.14/0054-mtd-spi-nor-w25q256-respect-default-mode.patch73
-rw-r--r--target/linux/ramips/patches-4.14/0069-awake-rt305x-dwc2-controller.patch15
-rw-r--r--target/linux/ramips/patches-4.14/0070-weak_reordering.patch10
-rw-r--r--target/linux/ramips/patches-4.14/0098-disable_cm.patch19
-rw-r--r--target/linux/ramips/patches-4.14/0099-pci-mt7620.patch10
-rw-r--r--target/linux/ramips/patches-4.14/0200-linkit_bootstrap.patch97
-rw-r--r--target/linux/ramips/patches-4.14/100-mt7621-core-detect-hack.patch61
-rw-r--r--target/linux/ramips/patches-4.14/101-mt7621-timer.patch87
-rw-r--r--target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch224
-rw-r--r--target/linux/ramips/patches-4.14/105-mt7621-memory-detect.patch125
-rw-r--r--target/linux/ramips/patches-4.14/110-mt7621-perfctr-fix.patch15
-rw-r--r--target/linux/ramips/patches-4.14/200-add-ralink-eth.patch20
-rw-r--r--target/linux/ramips/patches-4.14/300-mt7620-export-chip-version-and-pkg.patch19
-rw-r--r--target/linux/ramips/patches-4.14/302-spi-nor-add-gd25q512.patch14
-rw-r--r--target/linux/ramips/patches-4.14/304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch72
-rw-r--r--target/linux/ramips/patches-4.14/999-fix-pci-init-mt7620.patch21
-rw-r--r--target/linux/ramips/rt288x/config-4.14220
-rw-r--r--target/linux/ramips/rt305x/config-4.14195
-rw-r--r--target/linux/ramips/rt3883/config-4.14222
53 files changed, 0 insertions, 15043 deletions
diff --git a/target/linux/ramips/mt7620/config-4.14 b/target/linux/ramips/mt7620/config-4.14
deleted file mode 100644
index 0022bc12c9..0000000000
--- a/target/linux/ramips/mt7620/config-4.14
+++ /dev/null
@@ -1,235 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_OMEGA2P is not set
-CONFIG_DTB_RT_NONE=y
-# CONFIG_DTB_VOCORE2 is not set
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MT7621_WDT is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_GSW_MT7620=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_MT7620=y
-CONFIG_NET_RALINK_MT7620=y
-# CONFIG_NET_RALINK_RT3050 is not set
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/patches-4.14/0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch b/target/linux/ramips/patches-4.14/0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch
deleted file mode 100644
index 4f803dfd0d..0000000000
--- a/target/linux/ramips/patches-4.14/0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 35d017947401d9f449a7e55e52506744e0c62577 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Wed, 22 Aug 2018 22:38:06 +0200
-Subject: [PATCH] MIPS: ralink: Add rt3352 SPI_CS1 pinmux
-
-The rt3352 has a pin that can be used as second spi chip select,
-watchdog reset or GPIO. The pinmux setup was missing the definition of
-said pin.
-
-The pin is configured via the same bit on rt5350, so reuse the existing
-macro.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Patchwork: https://patchwork.linux-mips.org/patch/20301/
-Cc: John Crispin <john@phrozen.org>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: James Hogan <jhogan@kernel.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
----
- arch/mips/ralink/rt305x.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -49,6 +49,10 @@ static struct rt2880_pmx_func rgmii_func
- static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
- static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
- static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-+static struct rt2880_pmx_func rt3352_cs1_func[] = {
-+ FUNC("spi_cs1", 0, 45, 1),
-+ FUNC("wdg_cs1", 1, 45, 1),
-+};
-
- static struct rt2880_pmx_group rt3050_pinmux_data[] = {
- GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-@@ -75,6 +79,7 @@ static struct rt2880_pmx_group rt3352_pi
- GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
- GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
- GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ GRP("spi_cs1", rt3352_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
- { 0 }
- };
-
diff --git a/target/linux/ramips/patches-4.14/0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch b/target/linux/ramips/patches-4.14/0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch
deleted file mode 100644
index 7ac092cfb0..0000000000
--- a/target/linux/ramips/patches-4.14/0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0eb1cfffd5433d8dce3e4163a5cd9accc6000856 Mon Sep 17 00:00:00 2001
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Date: Wed, 5 Sep 2018 08:51:26 +0200
-Subject: [PATCH] MIPS: pci-rt2880: set pci controller of_node
-
-Set the PCI controller of_node such that PCI devices can be
-instantiated via device tree.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Acked-by: John Crispin <john@phrozen.org>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Patchwork: https://patchwork.linux-mips.org/patch/20423/
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: James Hogan <jhogan@kernel.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
----
- arch/mips/pci/pci-rt2880.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/pci/pci-rt2880.c
-+++ b/arch/mips/pci/pci-rt2880.c
-@@ -246,6 +246,8 @@ static int rt288x_pci_probe(struct platf
- rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
- (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-
-+ rt2880_pci_controller.of_node = pdev->dev.of_node;
-+
- register_pci_controller(&rt2880_pci_controller);
- return 0;
- }
diff --git a/target/linux/ramips/patches-4.14/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch b/target/linux/ramips/patches-4.14/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch
deleted file mode 100644
index 77f2622b9d..0000000000
--- a/target/linux/ramips/patches-4.14/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
-
-Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new
-issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is
-not. As the prerequisite of custom memory map has been removed, this results
-in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this
-platform.
-
-v2: Correctly compare that usermem is not null.
-
-This patch adds the originally intended prerequisite again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -369,6 +369,8 @@ static unsigned long __init bootmap_byte
- return ALIGN(bytes, sizeof(long));
- }
-
-+static int usermem __initdata;
-+
- static void __init bootmem_init(void)
- {
- unsigned long reserved_end;
-@@ -442,7 +444,7 @@ static void __init bootmem_init(void)
- /*
- * Reserve any memory between the start of RAM and PHYS_OFFSET
- */
-- if (ramstart > PHYS_OFFSET)
-+ if (usermem && ramstart > PHYS_OFFSET)
- add_memory_region(PHYS_OFFSET, ramstart - PHYS_OFFSET,
- BOOT_MEM_RESERVED);
-
-@@ -652,8 +654,6 @@ static void __init bootmem_init(void)
- * initialization hook for anything else was introduced.
- */
-
--static int usermem __initdata;
--
- static int __init early_parse_mem(char *p)
- {
- phys_addr_t start, size;
diff --git a/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
deleted file mode 100644
index b6f1ce93f4..0000000000
--- a/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ /dev/null
@@ -1,861 +0,0 @@
-From fec11d4e8dc5cc79bcd7c8fd55038ac21ac39965 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:22:39 +0000
-Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7621.c | 813 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 814 insertions(+)
- create mode 100644 arch/mips/pci/pci-mt7621.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
-+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
---- /dev/null
-+++ b/arch/mips/pci/pci-mt7621.c
-@@ -0,0 +1,836 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * PCI init for Ralink RT2880 solution
-+ *
-+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2007 Bruce Chang
-+ * Initial Release
-+ *
-+ * May 2009 Bruce Chang
-+ * support RT2880/RT3883 PCIe
-+ *
-+ * May 2011 Bruce Chang
-+ * support RT6855/MT7620 PCIe
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/version.h>
-+#include <asm/pci.h>
-+#include <asm/io.h>
-+#include <asm/mips-cm.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/of.h>
-+#include <linux/of_pci.h>
-+#include <linux/of_irq.h>
-+#include <linux/platform_device.h>
-+
-+#include <ralink_regs.h>
-+
-+extern void pcie_phy_init(void);
-+extern void chk_phy_pll(void);
-+
-+/*
-+ * These functions and structures provide the BIOS scan and mapping of the PCI
-+ * devices.
-+ */
-+
-+#define CONFIG_PCIE_PORT0
-+#define CONFIG_PCIE_PORT1
-+#define CONFIG_PCIE_PORT2
-+#define RALINK_PCIE0_CLK_EN (1<<24)
-+#define RALINK_PCIE1_CLK_EN (1<<25)
-+#define RALINK_PCIE2_CLK_EN (1<<26)
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+#define RALINK_INT_PCIE0 pcie_irq[0]
-+#define RALINK_INT_PCIE1 pcie_irq[1]
-+#define RALINK_INT_PCIE2 pcie_irq[2]
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCIE0_RST (1<<24)
-+#define RALINK_PCIE1_RST (1<<25)
-+#define RALINK_PCIE2_RST (1<<26)
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_BASE 0xBE140000
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+#define RT6855_PCIE2_OFFSET 0x4000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-+
-+
-+#define MV_WRITE(ofs, data) \
-+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-+#define MV_READ(ofs, data) \
-+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+#define MV_READ_DATA(ofs) \
-+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_16(ofs, data) \
-+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-+#define MV_READ_16(ofs, data) \
-+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_8(ofs, data) \
-+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-+#define MV_READ_8(ofs, data) \
-+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-+
-+
-+
-+#define RALINK_PCI_MM_MAP_BASE 0x60000000
-+#define RALINK_PCI_IO_MAP_BASE 0x1e160000
-+
-+#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
-+#define GPIO_PERST
-+#define ASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL |= val; \
-+ else \
-+ RALINK_RSTCTRL &= ~val; \
-+ } while(0)
-+#define DEASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL &= ~val; \
-+ else \
-+ RALINK_RSTCTRL |= val; \
-+ } while(0)
-+#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
-+#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
-+#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
-+#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
-+#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
-+#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
-+#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
-+#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
-+//RALINK_SYSCFG1 bit
-+#define RALINK_PCI_HOST_MODE_EN (1<<7)
-+#define RALINK_PCIE_RC_MODE_EN (1<<8)
-+//RALINK_RSTCTRL bit
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+//RALINK_CLKCFG1 bit
-+#define RALINK_PCI_CLK_EN (1<<19)
-+#define RALINK_PCIE_CLK_EN (1<<21)
-+//RALINK_GPIOMODE bit
-+#define PCI_SLOTx2 (1<<11)
-+#define PCI_SLOTx1 (2<<11)
-+//MTK PCIE PLL bit
-+#define PDRV_SW_SET (1<<31)
-+#define LC_CKDRVPD_ (1<<19)
-+
-+#define MEMORY_BASE 0x0
-+static int pcie_link_status = 0;
-+
-+#define PCI_ACCESS_READ_1 0
-+#define PCI_ACCESS_READ_2 1
-+#define PCI_ACCESS_READ_4 2
-+#define PCI_ACCESS_WRITE_1 3
-+#define PCI_ACCESS_WRITE_2 4
-+#define PCI_ACCESS_WRITE_4 5
-+
-+static int pcie_irq[3];
-+
-+static int config_access(unsigned char access_type, struct pci_bus *bus,
-+ unsigned int devfn, unsigned int where, u32 * data)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ uint32_t address_reg, data_reg;
-+ unsigned int address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+
-+ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ MV_WRITE(address_reg, address);
-+
-+ switch(access_type) {
-+ case PCI_ACCESS_WRITE_1:
-+ MV_WRITE_8(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_2:
-+ MV_WRITE_16(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_4:
-+ MV_WRITE(data_reg, *data);
-+ break;
-+ case PCI_ACCESS_READ_1:
-+ MV_READ_8( data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_2:
-+ MV_READ_16(data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_4:
-+ MV_READ(data_reg, data);
-+ break;
-+ default:
-+ printk("no specify access type\n");
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static int
-+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int
-+pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-+{
-+ switch (size) {
-+ case 1:
-+ return read_config_byte(bus, devfn, where, (u8 *) val);
-+ case 2:
-+ return read_config_word(bus, devfn, where, (u16 *) val);
-+ default:
-+ return read_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+static int
-+pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-+{
-+ switch (size) {
-+ case 1:
-+ return write_config_byte(bus, devfn, where, (u8) val);
-+ case 2:
-+ return write_config_word(bus, devfn, where, (u16) val);
-+ default:
-+ return write_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+struct pci_ops mt7621_pci_ops= {
-+ .read = pci_config_read,
-+ .write = pci_config_write,
-+};
-+
-+static struct resource mt7621_res_pci_mem1 = {
-+ .name = "PCI MEM1",
-+ .start = RALINK_PCI_MM_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource mt7621_res_pci_io1 = {
-+ .name = "PCI I/O1",
-+ .start = RALINK_PCI_IO_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller mt7621_controller = {
-+ .pci_ops = &mt7621_pci_ops,
-+ .mem_resource = &mt7621_res_pci_mem1,
-+ .io_resource = &mt7621_res_pci_io1,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+ .io_map_base = 0xa0000000,
-+};
-+
-+static void
-+read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_READ(data_reg, val);
-+ return;
-+}
-+
-+static void
-+write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_WRITE(data_reg, val);
-+ return;
-+}
-+
-+
-+int
-+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ u32 val;
-+ int irq = 0;
-+
-+ if ((dev->bus->number == 0) && (slot == 0)) {
-+ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 0 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x1)) {
-+ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 1 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x2)) {
-+ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 2 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 2:
-+ case 6:
-+ irq = RALINK_INT_PCIE1;
-+ break;
-+ case 4:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE0;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else {
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ return 0;
-+ }
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+ return irq;
-+}
-+
-+void
-+set_pcie_phy(u32 *addr, int start_b, int bits, int val)
-+{
-+// printk("0x%p:", addr);
-+// printk(" %x", *addr);
-+ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
-+ *(unsigned int *)(addr) |= val << start_b;
-+// printk(" -> %x\n", *addr);
-+}
-+
-+void
-+bypass_pipe_rst(void)
-+{
-+#if defined (CONFIG_PCIE_PORT0)
-+ /* PCIe Port 0 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ /* PCIe Port 1 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* PCIe Port 2 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+}
-+
-+void
-+set_phy_for_ssc(void)
-+{
-+ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
-+
-+ reg = (reg >> 6) & 0x7;
-+#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
-+ /* Set PCIe Port0 & Port1 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ printk("***** Xtal 40MHz *****\n");
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) {
-+ printk("***** Xtal 25MHz *****\n");
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ } else {
-+ printk("***** Xtal 20MHz *****\n");
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* Set PCIe Port2 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) { // 25MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+#endif
-+}
-+
-+void setup_cm_memory_region(struct resource *mem_resource)
-+{
-+ resource_size_t mask;
-+ if (mips_cps_numiocu(0)) {
-+ /* FIXME: hardware doesn't accept mask values with 1s after
-+ 0s (e.g. 0xffef), so it would be great to warn if that's
-+ about to happen */
-+ mask = ~(mem_resource->end - mem_resource->start);
-+
-+ write_gcr_reg1_base(mem_resource->start);
-+ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
-+ printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n",
-+ read_gcr_reg1_base(),
-+ read_gcr_reg1_mask());
-+ }
-+}
-+
-+static int mt7621_pci_probe(struct platform_device *pdev)
-+{
-+ unsigned long val = 0;
-+ int i;
-+
-+ for (i = 0; i < 3; i++)
-+ pcie_irq[i] = irq_of_parse_and_map(pdev->dev.of_node, i);
-+
-+ iomem_resource.start = 0;
-+ iomem_resource.end= ~0;
-+ ioport_resource.start= 0;
-+ ioport_resource.end = ~0;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-+ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
-+ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
-+
-+ mdelay(100);
-+#else
-+ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
-+#endif
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ DEASSERT_SYSRST_PCIE(val);
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+ if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
-+ bypass_pipe_rst();
-+ set_phy_for_ssc();
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ read_config(0, 0, 0, 0x70c, &val);
-+ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ read_config(0, 1, 0, 0x70c, &val);
-+ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ read_config(0, 2, 0, 0x70c, &val);
-+ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
-+ RALINK_SYSCFG1 &= ~(0x30);
-+ RALINK_SYSCFG1 |= (2<<4);
-+ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
-+ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
-+ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
-+ RALINK_PCIE_CLK_GEN |= 0x80000000;
-+ mdelay(50);
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-+
-+
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
-+ mdelay(100);
-+#else
-+ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
-+#endif
-+ mdelay(500);
-+
-+
-+ mdelay(500);
-+#if defined (CONFIG_PCIE_PORT0)
-+ if(( RALINK_PCI0_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE0 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
-+ pcie_link_status &= ~(1<<0);
-+ } else {
-+ pcie_link_status |= 1<<0;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ if(( RALINK_PCI1_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE1 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
-+ pcie_link_status &= ~(1<<1);
-+ } else {
-+ pcie_link_status |= 1<<1;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
-+ printk("PCIE2 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
-+ pcie_link_status &= ~(1<<2);
-+ } else {
-+ pcie_link_status |= 1<<2;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
-+ }
-+#endif
-+ if (pcie_link_status == 0)
-+ return 0;
-+
-+/*
-+pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
-+3'b000 x x x
-+3'b001 x x 0
-+3'b010 x 0 x
-+3'b011 x 1 0
-+3'b100 0 x x
-+3'b101 1 x 0
-+3'b110 1 0 x
-+3'b111 2 1 0
-+*/
-+ switch(pcie_link_status) {
-+ case 2:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ break;
-+ case 4:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
-+ break;
-+ case 5:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ case 6:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ }
-+ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-+ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
-+
-+/*
-+ ioport_resource.start = mt7621_res_pci_io1.start;
-+ ioport_resource.end = mt7621_res_pci_io1.end;
-+*/
-+
-+ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
-+ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ //PCIe0
-+ if((pcie_link_status & 0x1) != 0) {
-+ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI0_CLASS = 0x06040001;
-+ printk("PCIE0 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ //PCIe1
-+ if ((pcie_link_status & 0x2) != 0) {
-+ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI1_CLASS = 0x06040001;
-+ printk("PCIE1 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ //PCIe2
-+ if ((pcie_link_status & 0x4) != 0) {
-+ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI2_CLASS = 0x06040001;
-+ printk("PCIE2 enabled\n");
-+ }
-+#endif
-+
-+
-+ switch(pcie_link_status) {
-+ case 7:
-+ read_config(0, 2, 0, 0x4, &val);
-+ write_config(0, 2, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ read_config(0, 2, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 2, 0, 0x70c, val);
-+ case 3:
-+ case 5:
-+ case 6:
-+ read_config(0, 1, 0, 0x4, &val);
-+ write_config(0, 1, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ read_config(0, 1, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 1, 0, 0x70c, val);
-+ default:
-+ read_config(0, 0, 0, 0x4, &val);
-+ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-+ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
-+ read_config(0, 0, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 0, 0, 0x70c, val);
-+ }
-+
-+ pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node);
-+ setup_cm_memory_region(mt7621_controller.mem_resource);
-+ register_pci_controller(&mt7621_controller);
-+ return 0;
-+
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_pci_ids[] = {
-+ { .compatible = "mediatek,mt7621-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
-+
-+static struct platform_driver mt7621_pci_driver = {
-+ .probe = mt7621_pci_probe,
-+ .driver = {
-+ .name = "mt7621-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(mt7621_pci_ids),
-+ },
-+};
-+
-+static int __init mt7621_pci_init(void)
-+{
-+ return platform_driver_register(&mt7621_pci_driver);
-+}
-+
-+arch_initcall(mt7621_pci_init);
diff --git a/target/linux/ramips/patches-4.14/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-4.14/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
deleted file mode 100644
index 773c74f4e9..0000000000
--- a/target/linux/ramips/patches-4.14/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,12 +1,17 @@
- # SPDX-License-Identifier: GPL-2.0
- if RALINK
-
-+config CEVT_SYSTICK_QUIRK
-+ bool
-+ default n
-+
- config CLKEVT_RT3352
- bool
- depends on SOC_RT305X || SOC_MT7620
- default y
- select TIMER_OF
- select CLKSRC_MMIO
-+ select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
- bool
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -15,6 +15,26 @@
- #include <asm/time.h>
- #include <asm/cevt-r4k.h>
-
-+static int mips_state_oneshot(struct clock_event_device *evt)
-+{
-+ if (!cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 1;
-+ setup_irq(evt->irq, &c0_compare_irqaction);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mips_state_shutdown(struct clock_event_device *evt)
-+{
-+ if (cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 0;
-+ remove_irq(evt->irq, &c0_compare_irqaction);
-+ }
-+
-+ return 0;
-+}
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -281,17 +301,21 @@ int r4k_clockevent_init(void)
- cd->rating = 300;
- cd->irq = irq;
- cd->cpumask = cpumask_of(cpu);
-+ cd->set_state_shutdown = mips_state_shutdown;
-+ cd->set_state_oneshot = mips_state_oneshot;
- cd->set_next_event = mips_next_event;
- cd->event_handler = mips_event_handler;
-
- clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
-
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- if (cp0_timer_irq_installed)
- return 0;
-
- cp0_timer_irq_installed = 1;
-
- setup_irq(irq, &c0_compare_irqaction);
-+#endif
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-4.14/0006-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-4.14/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
deleted file mode 100644
index 90215fbf86..0000000000
--- a/target/linux/ramips/patches-4.14/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
-
-This feature will break udelay() and cause the delay loop to have longer delays
-when the frequency is scaled causing a performance hit.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -29,6 +29,10 @@
- /* enable the counter */
- #define CFG_CNT_EN 0x1
-
-+/* mt7620 frequency scaling defines */
-+#define CLK_LUT_CFG 0x40
-+#define SLEEP_EN BIT(31)
-+
- struct systick_device {
- void __iomem *membase;
- struct clock_event_device dev;
-@@ -36,21 +40,53 @@ struct systick_device {
- int freq_scale;
- };
-
-+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
-+
- static int systick_set_oneshot(struct clock_event_device *evt);
- static int systick_shutdown(struct clock_event_device *evt);
-
-+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
-+{
-+ if (sdev->freq_scale == status)
-+ return;
-+
-+ sdev->freq_scale = status;
-+
-+ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
-+ (status) ? ("enable") : ("disable"));
-+ if (status)
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-+ else
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
-+}
-+
-+static inline unsigned int read_count(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COUNT);
-+}
-+
-+static inline unsigned int read_compare(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COMPARE);
-+}
-+
-+static inline void write_compare(struct systick_device *sdev, unsigned int val)
-+{
-+ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
-+}
-+
- static int systick_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
- struct systick_device *sdev;
-- u32 count;
-+ int res;
-
- sdev = container_of(evt, struct systick_device, dev);
-- count = ioread32(sdev->membase + SYSTICK_COUNT);
-- count = (count + delta) % SYSTICK_FREQ;
-- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-+ delta += read_count(sdev);
-+ write_compare(sdev, delta);
-+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
-
-- return 0;
-+ return res;
- }
-
- static void systick_event_handler(struct clock_event_device *dev)
-@@ -60,20 +96,25 @@ static void systick_event_handler(struct
-
- static irqreturn_t systick_interrupt(int irq, void *dev_id)
- {
-- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
-+ int ret = 0;
-+ struct clock_event_device *cdev;
-+ struct systick_device *sdev;
-
-- dev->event_handler(dev);
-+ if (read_c0_cause() & STATUSF_IP7) {
-+ cdev = (struct clock_event_device *) dev_id;
-+ sdev = container_of(cdev, struct systick_device, dev);
-+
-+ /* Clear Count/Compare Interrupt */
-+ write_compare(sdev, read_compare(sdev));
-+ cdev->event_handler(cdev);
-+ ret = 1;
-+ }
-
-- return IRQ_HANDLED;
-+ return IRQ_RETVAL(ret);
- }
-
- static struct systick_device systick = {
- .dev = {
-- /*
-- * cevt-r4k uses 300, make sure systick
-- * gets used if available
-- */
-- .rating = 310,
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = systick_next_event,
- .set_state_shutdown = systick_shutdown,
-@@ -95,9 +136,15 @@ static int systick_shutdown(struct clock
- sdev = container_of(evt, struct systick_device, dev);
-
- if (sdev->irq_requested)
-- free_irq(systick.dev.irq, &systick_irqaction);
-+ remove_irq(systick.dev.irq, &systick_irqaction);
- sdev->irq_requested = 0;
-- iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 0);
-+
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 1);
-
- return 0;
- }
-@@ -117,34 +164,48 @@ static int systick_set_oneshot(struct cl
- return 0;
- }
-
-+static const struct of_device_id systick_match[] = {
-+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
-+ {},
-+};
-+
- static int __init ralink_systick_init(struct device_node *np)
- {
-+ const struct of_device_id *match;
-+ int rating = 200;
- int ret;
-
- systick.membase = of_iomap(np, 0);
- if (!systick.membase)
- return -ENXIO;
-
-- systick_irqaction.name = np->name;
-- systick.dev.name = np->name;
-- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
-- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
-- systick.dev.max_delta_ticks = 0x7fff;
-- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
-- systick.dev.min_delta_ticks = 0x3;
-+ match = of_match_node(systick_match, np);
-+ if (match) {
-+ systick_freq_scaling = match->data;
-+ /*
-+ * cevt-r4k uses 300, make sure systick
-+ * gets used if available
-+ */
-+ rating = 310;
-+ }
-+
-+ /* enable counter than register clock source */
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
-+
-+ /* register clock event */
- systick.dev.irq = irq_of_parse_and_map(np, 0);
- if (!systick.dev.irq) {
- pr_err("%s: request_irq failed", np->name);
- return -EINVAL;
- }
-
-- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-- SYSTICK_FREQ, 301, 16,
-- clocksource_mmio_readl_up);
-- if (ret)
-- return ret;
--
-- clockevents_register_device(&systick.dev);
-+ systick_irqaction.name = np->name;
-+ systick.dev.name = np->name;
-+ systick.dev.rating = rating;
-+ systick.dev.cpumask = cpumask_of(0);
-+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
-
- pr_info("%s: running - mult: %d, shift: %d\n",
- np->name, systick.dev.mult, systick.dev.shift);
diff --git a/target/linux/ramips/patches-4.14/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-4.14/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
deleted file mode 100644
index c05ee8018d..0000000000
--- a/target/linux/ramips/patches-4.14/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 18:46:02 +0200
-Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -82,6 +82,8 @@ void __init plat_mem_setup(void)
-
- __dt_setup_arch(dtb);
-
-+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-+
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/target/linux/ramips/patches-4.14/0009-PCI-MIPS-enable-PCIe-on-MT7688.patch b/target/linux/ramips/patches-4.14/0009-PCI-MIPS-enable-PCIe-on-MT7688.patch
deleted file mode 100644
index 6ca15fe32e..0000000000
--- a/target/linux/ramips/patches-4.14/0009-PCI-MIPS-enable-PCIe-on-MT7688.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 7768798964eb0e4f95eaecffb93b5d0ca28a38af Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 3 Jun 2017 20:00:03 +0200
-Subject: [PATCH] MIPS: pci-mt7620: enabled PCIe on MT7688
-To: linux-mips@linux-mips.org,
- John Crispin <john@phrozen.org>
-Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>,
- Ralf Baechle <ralf@linux-mips.org>,
- linux-mediatek@lists.infradead.org
-
-Use PCIe support for MT7628AN also on MT7688.
-Tested on WRTNODE2R.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- arch/mips/pci/pci-mt7620.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -316,6 +316,7 @@ static int mt7620_pci_probe(struct platf
- break;
-
- case MT762X_SOC_MT7628AN:
-+ case MT762X_SOC_MT7688:
- if (mt7628_pci_hw_init(pdev))
- return -1;
- break;
diff --git a/target/linux/ramips/patches-4.14/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.14/0013-owrt-hack-fix-mt7688-cache-issue.patch
deleted file mode 100644
index 47de8a5f17..0000000000
--- a/target/linux/ramips/patches-4.14/0013-owrt-hack-fix-mt7688-cache-issue.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:15:32 +0100
-Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/setup.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -910,7 +910,6 @@ static void __init arch_mem_init(char **
- crashk_res.end - crashk_res.start + 1,
- BOOTMEM_DEFAULT);
- #endif
-- device_tree_init();
-
- /*
- * In order to reduce the possibility of kernel panic when failed to
-@@ -1036,6 +1035,7 @@ void __init setup_arch(char **cmdline_p)
-
- cpu_cache_init();
- paging_init();
-+ device_tree_init();
- }
-
- unsigned long kernelsp[NR_CPUS];
diff --git a/target/linux/ramips/patches-4.14/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-4.14/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
deleted file mode 100644
index 1dc54ccf23..0000000000
--- a/target/linux/ramips/patches-4.14/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:18:05 +0100
-Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
- default
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -14,9 +14,9 @@ config CLKEVT_RT3352
- select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
-- bool
-+ bool "illegal access irq"
- depends on SOC_RT305X
-- default y
-+ default n
-
- config IRQ_INTC
- bool
diff --git a/target/linux/ramips/patches-4.14/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-4.14/0024-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 61ed9ea784..0000000000
--- a/target/linux/ramips/patches-4.14/0024-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+ if (!gpio_is_valid(gpio))
-+ return gpio;
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+ .probe = of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -553,7 +553,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -636,6 +638,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
diff --git a/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch
deleted file mode 100644
index 497110bb37..0000000000
--- a/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch
+++ /dev/null
@@ -1,524 +0,0 @@
-From 7adbe9a88c33c6e362a10b109d963b5500a21f00 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:34:05 +0100
-Subject: [PATCH 25/53] pinctrl: ralink: add pinctrl driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 2 +
- drivers/pinctrl/Kconfig | 5 +
- drivers/pinctrl/Makefile | 1 +
- drivers/pinctrl/pinctrl-rt2880.c | 474 ++++++++++++++++++++++++++++++++++++++
- 4 files changed, 482 insertions(+)
- create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -629,6 +629,8 @@ config RALINK
- select CLKDEV_LOOKUP
- select ARCH_HAS_RESET_CONTROLLER
- select RESET_CONTROLLER
-+ select PINCTRL
-+ select PINCTRL_RT2880
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -143,6 +143,11 @@ config PINCTRL_LPC18XX
- help
- Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
-
-+config PINCTRL_RT2880
-+ bool
-+ depends on RALINK
-+ select PINMUX
-+
- config PINCTRL_FALCON
- bool
- depends on SOC_FALCON
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-
- obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
- obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
- obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
-+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
- obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
- obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
- obj-$(CONFIG_PINCTRL_SIRF) += sirf/
---- /dev/null
-+++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,472 @@
-+/*
-+ * linux/drivers/pinctrl/pinctrl-rt2880.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/pinmux.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "core.h"
-+
-+#define SYSC_REG_GPIO_MODE 0x60
-+#define SYSC_REG_GPIO_MODE2 0x64
-+
-+struct rt2880_priv {
-+ struct device *dev;
-+
-+ struct pinctrl_pin_desc *pads;
-+ struct pinctrl_desc *desc;
-+
-+ struct rt2880_pmx_func **func;
-+ int func_count;
-+
-+ struct rt2880_pmx_group *groups;
-+ const char **group_names;
-+ int group_count;
-+
-+ uint8_t *gpio;
-+ int max_pins;
-+};
-+
-+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->group_count;
-+}
-+
-+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return NULL;
-+
-+ return p->group_names[group];
-+}
-+
-+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
-+ unsigned group,
-+ const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return -EINVAL;
-+
-+ *pins = p->groups[group].func[0].pins;
-+ *num_pins = p->groups[group].func[0].pin_count;
-+
-+ return 0;
-+}
-+
-+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_map *map, unsigned num_maps)
-+{
-+ int i;
-+
-+ for (i = 0; i < num_maps; i++)
-+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
-+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-+ kfree(map[i].data.configs.configs);
-+ kfree(map);
-+}
-+
-+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
-+ struct seq_file *s,
-+ unsigned offset)
-+{
-+ seq_printf(s, "ralink pio");
-+}
-+
-+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np,
-+ struct pinctrl_map **map)
-+{
-+ const char *function;
-+ int func = of_property_read_string(np, "function", &function);
-+ int grps = of_property_count_strings(np, "groups");
-+ int i;
-+
-+ if (func || !grps)
-+ return;
-+
-+ for (i = 0; i < grps; i++) {
-+ const char *group;
-+
-+ of_property_read_string_index(np, "groups", i, &group);
-+
-+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)->name = function;
-+ (*map)->data.mux.group = group;
-+ (*map)->data.mux.function = function;
-+ (*map)++;
-+ }
-+}
-+
-+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ int max_maps = 0;
-+ struct pinctrl_map *tmp;
-+ struct device_node *np;
-+
-+ for_each_child_of_node(np_config, np) {
-+ int ret = of_property_count_strings(np, "groups");
-+
-+ if (ret >= 0)
-+ max_maps += ret;
-+ }
-+
-+ if (!max_maps)
-+ return -EINVAL;
-+
-+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!*map)
-+ return -ENOMEM;
-+
-+ tmp = *map;
-+
-+ for_each_child_of_node(np_config, np)
-+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
-+ *num_maps = max_maps;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops rt2880_pctrl_ops = {
-+ .get_groups_count = rt2880_get_group_count,
-+ .get_group_name = rt2880_get_group_name,
-+ .get_group_pins = rt2880_get_group_pins,
-+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
-+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
-+ .dt_free_map = rt2880_pinctrl_dt_free_map,
-+};
-+
-+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func_count;
-+}
-+
-+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
-+ unsigned func)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func[func]->name;
-+}
-+
-+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (p->func[func]->group_count == 1)
-+ *groups = &p->group_names[p->func[func]->groups[0]];
-+ else
-+ *groups = p->group_names;
-+
-+ *num_groups = p->func[func]->group_count;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+ u32 mode = 0;
-+ u32 reg = SYSC_REG_GPIO_MODE;
-+ int i;
-+ int shift;
-+
-+ /* dont allow double use */
-+ if (p->groups[group].enabled) {
-+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
-+ return -EBUSY;
-+ }
-+
-+ p->groups[group].enabled = 1;
-+ p->func[func]->enabled = 1;
-+
-+ shift = p->groups[group].shift;
-+ if (shift >= 32) {
-+ shift -= 32;
-+ reg = SYSC_REG_GPIO_MODE2;
-+ }
-+ mode = rt_sysc_r32(reg);
-+ mode &= ~(p->groups[group].mask << shift);
-+
-+ /* mark the pins as gpio */
-+ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
-+ p->gpio[p->groups[group].func[0].pins[i]] = 1;
-+
-+ /* function 0 is gpio and needs special handling */
-+ if (func == 0) {
-+ mode |= p->groups[group].gpio << shift;
-+ } else {
-+ for (i = 0; i < p->func[func]->pin_count; i++)
-+ p->gpio[p->func[func]->pins[i]] = 0;
-+ mode |= p->func[func]->value << shift;
-+ }
-+ rt_sysc_w32(mode, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned pin)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (!p->gpio[pin]) {
-+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops rt2880_pmx_group_ops = {
-+ .get_functions_count = rt2880_pmx_func_count,
-+ .get_function_name = rt2880_pmx_func_name,
-+ .get_function_groups = rt2880_pmx_group_get_groups,
-+ .set_mux = rt2880_pmx_group_enable,
-+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
-+};
-+
-+static struct pinctrl_desc rt2880_pctrl_desc = {
-+ .owner = THIS_MODULE,
-+ .name = "rt2880-pinmux",
-+ .pctlops = &rt2880_pctrl_ops,
-+ .pmxops = &rt2880_pmx_group_ops,
-+};
-+
-+static struct rt2880_pmx_func gpio_func = {
-+ .name = "gpio",
-+};
-+
-+static int rt2880_pinmux_index(struct rt2880_priv *p)
-+{
-+ struct rt2880_pmx_func **f;
-+ struct rt2880_pmx_group *mux = p->groups;
-+ int i, j, c = 0;
-+
-+ /* count the mux functions */
-+ while (mux->name) {
-+ p->group_count++;
-+ mux++;
-+ }
-+
-+ /* allocate the group names array needed by the gpio function */
-+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
-+ if (!p->group_names)
-+ return -1;
-+
-+ for (i = 0; i < p->group_count; i++) {
-+ p->group_names[i] = p->groups[i].name;
-+ p->func_count += p->groups[i].func_count;
-+ }
-+
-+ /* we have a dummy function[0] for gpio */
-+ p->func_count++;
-+
-+ /* allocate our function and group mapping index buffers */
-+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
-+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
-+ if (!f || !gpio_func.groups)
-+ return -1;
-+
-+ /* add a backpointer to the function so it knows its group */
-+ gpio_func.group_count = p->group_count;
-+ for (i = 0; i < gpio_func.group_count; i++)
-+ gpio_func.groups[i] = i;
-+
-+ f[c] = &gpio_func;
-+ c++;
-+
-+ /* add remaining functions */
-+ for (i = 0; i < p->group_count; i++) {
-+ for (j = 0; j < p->groups[i].func_count; j++) {
-+ f[c] = &p->groups[i].func[j];
-+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
-+ f[c]->groups[0] = i;
-+ f[c]->group_count = 1;
-+ c++;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_pins(struct rt2880_priv *p)
-+{
-+ int i, j;
-+
-+ /* loop over the functions and initialize the pins array. also work out the highest pin used */
-+ for (i = 0; i < p->func_count; i++) {
-+ int pin;
-+
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->func[i]->pins[j] = p->func[i]->pin_first + j;
-+
-+ pin = p->func[i]->pin_first + p->func[i]->pin_count;
-+ if (pin > p->max_pins)
-+ p->max_pins = pin;
-+ }
-+
-+ /* the buffer that tells us which pins are gpio */
-+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
-+ GFP_KERNEL);
-+ /* the pads needed to tell pinctrl about our pins */
-+ p->pads = devm_kzalloc(p->dev,
-+ sizeof(struct pinctrl_pin_desc) * p->max_pins,
-+ GFP_KERNEL);
-+ if (!p->pads || !p->gpio ) {
-+ dev_err(p->dev, "Failed to allocate gpio data\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
-+ for (i = 0; i < p->func_count; i++) {
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->gpio[p->func[i]->pins[j]] = 0;
-+ }
-+
-+ /* pin 0 is always a gpio */
-+ p->gpio[0] = 1;
-+
-+ /* set the pads */
-+ for (i = 0; i < p->max_pins; i++) {
-+ /* strlen("ioXY") + 1 = 5 */
-+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
-+
-+ if (!name) {
-+ dev_err(p->dev, "Failed to allocate pad name\n");
-+ return -ENOMEM;
-+ }
-+ snprintf(name, 5, "io%d", i);
-+ p->pads[i].number = i;
-+ p->pads[i].name = name;
-+ }
-+ p->desc->pins = p->pads;
-+ p->desc->npins = p->max_pins;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_probe(struct platform_device *pdev)
-+{
-+ struct rt2880_priv *p;
-+ struct pinctrl_dev *dev;
-+ struct device_node *np;
-+
-+ if (!rt2880_pinmux_data)
-+ return -ENOSYS;
-+
-+ /* setup the private data */
-+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ p->dev = &pdev->dev;
-+ p->desc = &rt2880_pctrl_desc;
-+ p->groups = rt2880_pinmux_data;
-+ platform_set_drvdata(pdev, p);
-+
-+ /* init the device */
-+ if (rt2880_pinmux_index(p)) {
-+ dev_err(&pdev->dev, "failed to load index\n");
-+ return -EINVAL;
-+ }
-+ if (rt2880_pinmux_pins(p)) {
-+ dev_err(&pdev->dev, "failed to load pins\n");
-+ return -EINVAL;
-+ }
-+ dev = pinctrl_register(p->desc, &pdev->dev, p);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ /* finalize by adding gpio ranges for enables gpio controllers */
-+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
-+ const __be32 *ngpio, *gpiobase;
-+ struct pinctrl_gpio_range *range;
-+ char *name;
-+
-+ if (!of_device_is_available(np))
-+ continue;
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (!ngpio || !gpiobase) {
-+ dev_err(&pdev->dev, "failed to load chip info\n");
-+ return -EINVAL;
-+ }
-+
-+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
-+ range->name = name = (char *) &range[1];
-+ sprintf(name, "pio");
-+ range->npins = __be32_to_cpu(*ngpio);
-+ range->base = __be32_to_cpu(*gpiobase);
-+ range->pin_base = range->base;
-+ pinctrl_add_gpio_range(dev, range);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt2880_pinmux_match[] = {
-+ { .compatible = "ralink,rt2880-pinmux" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
-+
-+static struct platform_driver rt2880_pinmux_driver = {
-+ .probe = rt2880_pinmux_probe,
-+ .driver = {
-+ .name = "rt2880-pinmux",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_pinmux_match,
-+ },
-+};
-+
-+int __init rt2880_pinmux_init(void)
-+{
-+ return platform_driver_register(&rt2880_pinmux_driver);
-+}
-+
-+core_initcall_sync(rt2880_pinmux_init);
diff --git a/target/linux/ramips/patches-4.14/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.14/0026-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index 7d5f98f647..0000000000
--- a/target/linux/ramips/patches-4.14/0026-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+ - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+ - first cell is the pin number
-+ - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+ SoC type. Register offsets need to be in this order.
-+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+
-+ reg = <0x600 0x34>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ };
diff --git a/target/linux/ramips/patches-4.14/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-4.14/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
deleted file mode 100644
index 35cedf61fd..0000000000
--- a/target/linux/ramips/patches-4.14/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ /dev/null
@@ -1,430 +0,0 @@
-From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 20:36:29 +0200
-Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
-
-Add gpio driver for Ralink SoC. This driver makes the gpio core on
-RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
- 4 files changed, 386 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
- create mode 100644 drivers/gpio/gpio-ralink.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
-@@ -0,0 +1,24 @@
-+/*
-+ * Ralink SoC GPIO API support
-+ *
-+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MACH_RALINK_GPIO_H
-+#define __ASM_MACH_RALINK_GPIO_H
-+
-+#define ARCH_NR_GPIOS 128
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value __gpio_get_value
-+#define gpio_set_value __gpio_set_value
-+#define gpio_cansleep __gpio_cansleep
-+#define gpio_to_irq __gpio_to_irq
-+
-+#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -398,6 +398,12 @@ config GPIO_REG
- A 32-bit single register GPIO fixed in/out implementation. This
- can be used to represent any register as a set of GPIO signals.
-
-+config GPIO_RALINK
-+ bool "Ralink GPIO Support"
-+ depends on RALINK
-+ help
-+ Say yes here to support the Ralink SoC GPIO device
-+
- config GPIO_SPEAR_SPICS
- bool "ST SPEAr13xx SPI Chip Select as GPIO support"
- depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -98,6 +98,7 @@ obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-p
- obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
- obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
-+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,355 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+
-+enum ralink_gpio_reg {
-+ GPIO_REG_INT = 0,
-+ GPIO_REG_EDGE,
-+ GPIO_REG_RENA,
-+ GPIO_REG_FENA,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DIR,
-+ GPIO_REG_POL,
-+ GPIO_REG_SET,
-+ GPIO_REG_RESET,
-+ GPIO_REG_TOGGLE,
-+ GPIO_REG_MAX
-+};
-+
-+struct ralink_gpio_chip {
-+ struct gpio_chip chip;
-+ u8 regs[GPIO_REG_MAX];
-+
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ struct irq_domain *domain;
-+ int irq;
-+
-+ u32 rising;
-+ u32 falling;
-+};
-+
-+#define MAP_MAX 4
-+static struct irq_domain *irq_map[MAP_MAX];
-+static int irq_map_count;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
-+{
-+ struct ralink_gpio_chip *rg;
-+
-+ rg = container_of(chip, struct ralink_gpio_chip, chip);
-+
-+ return rg;
-+}
-+
-+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, rg->membase + rg->regs[reg]);
-+}
-+
-+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
-+{
-+ return ioread32(rg->membase + rg->regs[reg]);
-+}
-+
-+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
-+}
-+
-+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t &= ~BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ ralink_gpio_set(chip, offset, value);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t |= BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ if (rg->irq < 1)
-+ return -1;
-+
-+ return irq_create_mapping(rg->domain, pin);
-+}
-+
-+static void ralink_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < irq_map_count; i++) {
-+ struct irq_domain *domain = irq_map[i];
-+ struct ralink_gpio_chip *rg;
-+ unsigned long pending;
-+ int bit;
-+
-+ rg = (struct ralink_gpio_chip *) domain->host_data;
-+ pending = rt_gpio_r32(rg, GPIO_REG_INT);
-+
-+ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
-+ u32 map = irq_find_mapping(domain, bit);
-+ generic_handle_irq(map);
-+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void ralink_gpio_irq_unmask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void ralink_gpio_irq_mask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ struct ralink_gpio_chip *rg;
-+ u32 mask = BIT(d->hwirq);
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip ralink_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = ralink_gpio_irq_unmask,
-+ .irq_mask = ralink_gpio_irq_mask,
-+ .irq_mask_ack = ralink_gpio_irq_mask,
-+ .irq_set_type = ralink_gpio_irq_type,
-+};
-+
-+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = gpio_map,
-+};
-+
-+static void ralink_gpio_irq_init(struct device_node *np,
-+ struct ralink_gpio_chip *rg)
-+{
-+ if (irq_map_count >= MAP_MAX)
-+ return;
-+
-+ rg->irq = irq_of_parse_and_map(np, 0);
-+ if (!rg->irq)
-+ return;
-+
-+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
-+ &irq_domain_ops, rg);
-+ if (!rg->domain) {
-+ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
-+ return;
-+ }
-+
-+ irq_map[irq_map_count++] = rg->domain;
-+
-+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
-+
-+ if (!atomic_read(&irq_refcount))
-+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
-+ atomic_inc(&irq_refcount);
-+
-+ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
-+}
-+
-+static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ return pinctrl_request_gpio(gpio);
-+}
-+
-+static void ralink_gpio_free(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ pinctrl_free_gpio(gpio);
-+}
-+
-+static int ralink_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct ralink_gpio_chip *rg;
-+ const __be32 *ngpio, *gpiobase;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to find resource\n");
-+ return -ENOMEM;
-+ }
-+
-+ rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+ if (!rg)
-+ return -ENOMEM;
-+
-+ rg->membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (!rg->membase) {
-+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (of_property_read_u8_array(np, "ralink,register-map",
-+ rg->regs, GPIO_REG_MAX)) {
-+ dev_err(&pdev->dev, "failed to read register definition\n");
-+ return -EINVAL;
-+ }
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ if (!ngpio) {
-+ dev_err(&pdev->dev, "failed to read number of pins\n");
-+ return -EINVAL;
-+ }
-+
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (gpiobase)
-+ rg->chip.base = be32_to_cpu(*gpiobase);
-+ else
-+ rg->chip.base = -1;
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.parent = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
-+ rg->chip.ngpio = be32_to_cpu(*ngpio);
-+ rg->chip.direction_input = ralink_gpio_direction_input;
-+ rg->chip.direction_output = ralink_gpio_direction_output;
-+ rg->chip.get = ralink_gpio_get;
-+ rg->chip.set = ralink_gpio_set;
-+ rg->chip.request = ralink_gpio_request;
-+ rg->chip.to_irq = ralink_gpio_to_irq;
-+ rg->chip.free = ralink_gpio_free;
-+
-+ /* set polarity to low for all lines */
-+ rt_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ ralink_gpio_irq_init(np, rg);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static const struct of_device_id ralink_gpio_match[] = {
-+ { .compatible = "ralink,rt2880-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
-+
-+static struct platform_driver ralink_gpio_driver = {
-+ .probe = ralink_gpio_probe,
-+ .driver = {
-+ .name = "rt2880_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_gpio_match,
-+ },
-+};
-+
-+static int __init ralink_gpio_init(void)
-+{
-+ return platform_driver_register(&ralink_gpio_driver);
-+}
-+
-+subsys_initcall(ralink_gpio_init);
diff --git a/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
deleted file mode 100644
index debeae2806..0000000000
--- a/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
+++ /dev/null
@@ -1,405 +0,0 @@
-From 61ac7d9b4228de8c332900902c2b93189b042eab Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:00:32 +0100
-Subject: [PATCH 28/53] GPIO: ralink: add mt7621 gpio controller
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 3 +
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mt7621.c | 354 ++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 364 insertions(+)
- create mode 100644 drivers/gpio/gpio-mt7621.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -631,6 +631,9 @@ config RALINK
- select RESET_CONTROLLER
- select PINCTRL
- select PINCTRL_RT2880
-+ select ARCH_HAS_RESET_CONTROLLER
-+ select RESET_CONTROLLER
-+ select ARCH_REQUIRE_GPIOLIB
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -298,6 +298,12 @@ config GPIO_MENZ127
- help
- Say yes here to support the MEN 16Z127 GPIO Controller
-
-+config GPIO_MT7621
-+ bool "Mediatek GPIO Support"
-+ depends on SOC_MT7620 || SOC_MT7621
-+ help
-+ Say yes here to support the Mediatek SoC GPIO device
-+
- config GPIO_MM_LANTIQ
- bool "Lantiq Memory mapped GPIOs"
- depends on LANTIQ && SOC_XWAY
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -152,3 +152,4 @@ obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
- obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
- obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
- obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
-+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mt7621.c
-@@ -0,0 +1,354 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/module.h>
-+#include <linux/of_irq.h>
-+#include <linux/spinlock.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#define MTK_MAX_BANK 3
-+#define MTK_BANK_WIDTH 32
-+
-+enum mediatek_gpio_reg {
-+ GPIO_REG_CTRL = 0,
-+ GPIO_REG_POL,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DSET,
-+ GPIO_REG_DCLR,
-+ GPIO_REG_REDGE,
-+ GPIO_REG_FEDGE,
-+ GPIO_REG_HLVL,
-+ GPIO_REG_LLVL,
-+ GPIO_REG_STAT,
-+ GPIO_REG_EDGE,
-+};
-+
-+static void __iomem *mediatek_gpio_membase;
-+static int mediatek_gpio_irq;
-+static struct irq_domain *mediatek_gpio_irq_domain;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+struct mtk_gc {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ int bank;
-+ u32 rising;
-+ u32 falling;
-+} *gc_map[MTK_MAX_BANK];
-+
-+static inline struct mtk_gc
-+*to_mediatek_gpio(struct gpio_chip *chip)
-+{
-+ struct mtk_gc *mgc;
-+
-+ mgc = container_of(chip, struct mtk_gc, chip);
-+
-+ return mgc;
-+}
-+
-+static inline void
-+mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static inline u32
-+mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
-+{
-+ return ioread32(mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static void
-+mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t &= ~BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t |= BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ mediatek_gpio_set(chip, offset, value);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ if (t & BIT(offset))
-+ return 0;
-+
-+ return 1;
-+}
-+
-+static int
-+mediatek_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ return irq_create_mapping(mediatek_gpio_irq_domain, pin + (rg->bank * MTK_BANK_WIDTH));
-+}
-+
-+static int
-+mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
-+{
-+ const __be32 *id = of_get_property(bank, "reg", NULL);
-+ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct mtk_gc), GFP_KERNEL);
-+
-+ if (!rg || !id || be32_to_cpu(*id) > MTK_MAX_BANK)
-+ return -ENOMEM;
-+
-+ gc_map[be32_to_cpu(*id)] = rg;
-+
-+ memset(rg, 0, sizeof(struct mtk_gc));
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.parent = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = bank;
-+ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
-+ rg->chip.ngpio = MTK_BANK_WIDTH;
-+ rg->chip.direction_input = mediatek_gpio_direction_input;
-+ rg->chip.direction_output = mediatek_gpio_direction_output;
-+ rg->chip.get_direction = mediatek_gpio_get_direction;
-+ rg->chip.get = mediatek_gpio_get;
-+ rg->chip.set = mediatek_gpio_set;
-+ if (mediatek_gpio_irq_domain)
-+ rg->chip.to_irq = mediatek_gpio_to_irq;
-+ rg->bank = be32_to_cpu(*id);
-+
-+ /* set polarity to low for all gpios */
-+ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static void
-+mediatek_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < MTK_MAX_BANK; i++) {
-+ struct mtk_gc *rg = gc_map[i];
-+ unsigned long pending;
-+ int bit;
-+
-+ if (!rg)
-+ continue;
-+
-+ pending = mtk_gpio_r32(rg, GPIO_REG_STAT);
-+
-+ for_each_set_bit(bit, &pending, MTK_BANK_WIDTH) {
-+ u32 map = irq_find_mapping(mediatek_gpio_irq_domain, (MTK_BANK_WIDTH * i) + bit);
-+
-+ generic_handle_irq(map);
-+ mtk_gpio_w32(rg, GPIO_REG_STAT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void
-+mediatek_gpio_irq_unmask(struct irq_data *d)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ if (!rg)
-+ return;
-+
-+ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
-+ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(d->hwirq) & rg->rising));
-+ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void
-+mediatek_gpio_irq_mask(struct irq_data *d)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ if (!rg)
-+ return;
-+
-+ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
-+ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~BIT(d->hwirq));
-+ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int
-+mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ u32 mask = BIT(d->hwirq);
-+
-+ if (!rg)
-+ return -1;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip mediatek_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = mediatek_gpio_irq_unmask,
-+ .irq_mask = mediatek_gpio_irq_mask,
-+ .irq_mask_ack = mediatek_gpio_irq_mask,
-+ .irq_set_type = mediatek_gpio_irq_type,
-+};
-+
-+static int
-+mediatek_gpio_gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &mediatek_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = mediatek_gpio_gpio_map,
-+};
-+
-+static int
-+mediatek_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *bank, *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ mediatek_gpio_membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mediatek_gpio_membase))
-+ return PTR_ERR(mediatek_gpio_membase);
-+
-+ mediatek_gpio_irq = irq_of_parse_and_map(np, 0);
-+ if (mediatek_gpio_irq) {
-+ mediatek_gpio_irq_domain = irq_domain_add_linear(np,
-+ MTK_MAX_BANK * MTK_BANK_WIDTH,
-+ &irq_domain_ops, NULL);
-+ if (!mediatek_gpio_irq_domain)
-+ dev_err(&pdev->dev, "irq_domain_add_linear failed\n");
-+ }
-+
-+ for_each_child_of_node(np, bank)
-+ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
-+ mediatek_gpio_bank_probe(pdev, bank);
-+
-+ if (mediatek_gpio_irq_domain)
-+ irq_set_chained_handler(mediatek_gpio_irq, mediatek_gpio_irq_handler);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mediatek_gpio_match[] = {
-+ { .compatible = "mtk,mt7621-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
-+
-+static struct platform_driver mediatek_gpio_driver = {
-+ .probe = mediatek_gpio_probe,
-+ .driver = {
-+ .name = "mt7621_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gpio_match,
-+ },
-+};
-+
-+static int __init
-+mediatek_gpio_init(void)
-+{
-+ return platform_driver_register(&mediatek_gpio_driver);
-+}
-+
-+subsys_initcall(mediatek_gpio_init);
diff --git a/target/linux/ramips/patches-4.14/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch b/target/linux/ramips/patches-4.14/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch
deleted file mode 100644
index 8520ce32ff..0000000000
--- a/target/linux/ramips/patches-4.14/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001
-From: Daniel Santos <daniel.santos@pobox.com>
-Date: Sun, 4 Nov 2018 20:24:32 -0600
-Subject: gpio-ralink: Add support for GPIO as interrupt-controller
-
-Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
----
- Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++
- drivers/gpio/gpio-ralink.c | 2 +-
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -17,6 +17,9 @@ Required properties:
-
- Optional properties:
- - ralink,gpio-base : Specify the GPIO chips base number
-+- interrupt-controller : marks this as an interrupt controller
-+- #interrupt-cells : a standard two-cell interrupt flag, see
-+ interrupt-controller/interrupts.txt
-
- Example:
-
-@@ -28,6 +31,9 @@ Example:
-
- reg = <0x600 0x34>;
-
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
- interrupt-parent = <&intc>;
- interrupts = <6>;
-
---- a/drivers/gpio/gpio-ralink.c
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d
- }
-
- static const struct irq_domain_ops irq_domain_ops = {
-- .xlate = irq_domain_xlate_onecell,
-+ .xlate = irq_domain_xlate_twocell,
- .map = gpio_map,
- };
-
diff --git a/target/linux/ramips/patches-4.14/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-4.14/0031-uvc-add-iPassion-iP2970-support.patch
deleted file mode 100644
index 7ed1a616f6..0000000000
--- a/target/linux/ramips/patches-4.14/0031-uvc-add-iPassion-iP2970-support.patch
+++ /dev/null
@@ -1,246 +0,0 @@
-From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/media/usb/uvc/uvc_driver.c | 12 +++
- drivers/media/usb/uvc/uvc_status.c | 2 +
- drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h | 5 +-
- 4 files changed, 165 insertions(+), 1 deletion(-)
-
---- a/drivers/media/usb/uvc/uvc_driver.c
-+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2749,6 +2749,18 @@ static const struct usb_device_id uvc_id
- .bInterfaceSubClass = 1,
- .bInterfaceProtocol = 0,
- .driver_info = UVC_QUIRK_FORCE_Y8 },
-+ /* iPassion iP2970 */
-+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
-+ | USB_DEVICE_ID_MATCH_INT_INFO,
-+ .idVendor = 0x1B3B,
-+ .idProduct = 0x2970,
-+ .bInterfaceClass = USB_CLASS_VIDEO,
-+ .bInterfaceSubClass = 1,
-+ .bInterfaceProtocol = 0,
-+ .driver_info = UVC_QUIRK_PROBE_MINMAX
-+ | UVC_QUIRK_STREAM_NO_FID
-+ | UVC_QUIRK_MOTION
-+ | UVC_QUIRK_SINGLE_ISO },
- /* Generic USB Video Class */
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
---- a/drivers/media/usb/uvc/uvc_status.c
-+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
- switch (dev->status[0] & 0x0f) {
- case UVC_STATUS_TYPE_CONTROL:
- uvc_event_control(dev, dev->status, len);
-+ dev->motion = 1;
- break;
-
- case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
- }
-
- pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
-+ dev->motion = 0;
-
- /* For high-speed interrupt endpoints, the bInterval value is used as
- * an exponent of two. Some developers forgot about it.
---- a/drivers/media/usb/uvc/uvc_video.c
-+++ b/drivers/media/usb/uvc/uvc_video.c
-@@ -21,6 +21,11 @@
- #include <linux/wait.h>
- #include <linux/atomic.h>
- #include <asm/unaligned.h>
-+#include <linux/skbuff.h>
-+#include <linux/kobject.h>
-+#include <linux/netlink.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-
- #include <media/v4l2-common.h>
-
-@@ -1101,9 +1106,149 @@ static void uvc_video_decode_data(struct
- }
- }
-
-+struct bh_priv {
-+ unsigned long seen;
-+};
-+
-+struct bh_event {
-+ const char *name;
-+ struct sk_buff *skb;
-+ struct work_struct work;
-+};
-+
-+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
-+#define BH_DBG(fmt, args...) do {} while (0)
-+#define BH_SKB_SIZE 2048
-+
-+extern u64 uevent_next_seqnum(void);
-+static int seen = 0;
-+
-+static int bh_event_add_var(struct bh_event *event, int argv,
-+ const char *format, ...)
-+{
-+ static char buf[128];
-+ char *s;
-+ va_list args;
-+ int len;
-+
-+ if (argv)
-+ return 0;
-+
-+ va_start(args, format);
-+ len = vsnprintf(buf, sizeof(buf), format, args);
-+ va_end(args);
-+
-+ if (len >= sizeof(buf)) {
-+ BH_ERR("buffer size too small\n");
-+ WARN_ON(1);
-+ return -ENOMEM;
-+ }
-+
-+ s = skb_put(event->skb, len + 1);
-+ strcpy(s, buf);
-+
-+ BH_DBG("added variable '%s'\n", s);
-+
-+ return 0;
-+}
-+
-+static int motion_hotplug_fill_event(struct bh_event *event)
-+{
-+ int s = jiffies;
-+ int ret;
-+
-+ if (!seen)
-+ seen = jiffies;
-+
-+ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "PATH=%s",
-+ "/sbin:/bin:/usr/sbin:/usr/bin");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "ACTION=motion");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
-+ if (ret)
-+ return ret;
-+ seen = s;
-+
-+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
-+
-+ return ret;
-+}
-+
-+static void motion_hotplug_work(struct work_struct *work)
-+{
-+ struct bh_event *event = container_of(work, struct bh_event, work);
-+ int ret = 0;
-+
-+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
-+ if (!event->skb)
-+ goto out_free_event;
-+
-+ ret = bh_event_add_var(event, 0, "%s@", "add");
-+ if (ret)
-+ goto out_free_skb;
-+
-+ ret = motion_hotplug_fill_event(event);
-+ if (ret)
-+ goto out_free_skb;
-+
-+ NETLINK_CB(event->skb).dst_group = 1;
-+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-+
-+out_free_skb:
-+ if (ret) {
-+ BH_ERR("work error %d\n", ret);
-+ kfree_skb(event->skb);
-+ }
-+out_free_event:
-+ kfree(event);
-+}
-+
-+static int motion_hotplug_create_event(void)
-+{
-+ struct bh_event *event;
-+
-+ event = kzalloc(sizeof(*event), GFP_KERNEL);
-+ if (!event)
-+ return -ENOMEM;
-+
-+ event->name = "motion";
-+
-+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
-+ schedule_work(&event->work);
-+
-+ return 0;
-+}
-+
-+#define MOTION_FLAG_OFFSET 4
- static void uvc_video_decode_end(struct uvc_streaming *stream,
- struct uvc_buffer *buf, const __u8 *data, int len)
- {
-+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
-+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
-+ u8 *mem;
-+ buf->state = UVC_BUF_STATE_READY;
-+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
-+ if ( stream->dev->motion ) {
-+ stream->dev->motion = 0;
-+ motion_hotplug_create_event();
-+ } else {
-+ *mem &= 0x7f;
-+ }
-+ }
-+
- /* Mark the buffer as done if the EOF marker is set. */
- if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1518,6 +1663,8 @@ static int uvc_init_video_isoc(struct uv
- if (npackets == 0)
- return -ENOMEM;
-
-+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
-+ npackets = 1;
- size = npackets * psize;
-
- for (i = 0; i < UVC_URBS; ++i) {
---- a/drivers/media/usb/uvc/uvcvideo.h
-+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -186,7 +186,9 @@
- #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
- #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
- #define UVC_QUIRK_FORCE_Y8 0x00000800
--
-+#define UVC_QUIRK_MOTION 0x00001000
-+#define UVC_QUIRK_SINGLE_ISO 0x00002000
-+
- /* Format flags */
- #define UVC_FMT_FLAG_COMPRESSED 0x00000001
- #define UVC_FMT_FLAG_STREAM 0x00000002
-@@ -584,6 +586,7 @@ struct uvc_device {
- __u8 *status;
- struct input_dev *input;
- char input_phys[64];
-+ int motion;
- };
-
- enum uvc_handle_state {
diff --git a/target/linux/ramips/patches-4.14/0034-NET-multi-phy-support.patch b/target/linux/ramips/patches-4.14/0034-NET-multi-phy-support.patch
deleted file mode 100644
index 98ea5f557c..0000000000
--- a/target/linux/ramips/patches-4.14/0034-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 34/53] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -913,7 +913,10 @@ void phy_state_machine(struct work_struc
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- phy_link_down(phydev, true);
-+ if (!phydev->no_auto_carrier_off)
-+ phy_link_down(phydev, true);
-+ else
-+ phy_link_down(phydev, false);
- break;
- }
-
-@@ -1000,7 +1003,10 @@ void phy_state_machine(struct work_struc
- phy_link_up(phydev);
- } else {
- phydev->state = PHY_NOLINK;
-- phy_link_down(phydev, true);
-+ if (!phydev->no_auto_carrier_off)
-+ phy_link_down(phydev, true);
-+ else
-+ phy_link_down(phydev, false);
- }
-
- if (phy_interrupt_is_valid(phydev))
-@@ -1010,7 +1016,10 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- phy_link_down(phydev, true);
-+ if (!phydev->no_auto_carrier_off)
-+ phy_link_down(phydev, true);
-+ else
-+ phy_link_down(phydev, false);
- do_suspend = true;
- }
- break;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -414,6 +414,7 @@ struct phy_device {
- bool suspended_by_mdio_bus;
- bool sysfs_links;
- bool loopback_enabled;
-+ bool no_auto_carrier_off;
-
- enum phy_state state;
-
diff --git a/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch
deleted file mode 100644
index 39717bbad4..0000000000
--- a/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_RETRIES 3
-
-@@ -51,7 +51,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1798,6 +1802,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1930,7 +1935,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -2005,6 +2009,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-4.14/0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch b/target/linux/ramips/patches-4.14/0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch
deleted file mode 100644
index 8d20c45c7c..0000000000
--- a/target/linux/ramips/patches-4.14/0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] Revert "mtd: nand: Remove unused chip->write_page() hook"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit f107d7a43923a83d837b3ea3c7b7de58cd014bbd.
-
-OpenWrt's downstream driver mtk_nand2 still uses that callback.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -2577,7 +2577,7 @@ static int nand_write_page_syndrome(stru
- }
-
- /**
-- * nand_write_page - write one page
-+ * nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @offset: address offset within the page
-@@ -2761,9 +2761,9 @@ static int nand_do_write_ops(struct mtd_
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- }
-
-- ret = nand_write_page(mtd, chip, column, bytes, wbuf,
-- oob_required, page,
-- (ops->mode == MTD_OPS_RAW));
-+ ret = chip->write_page(mtd, chip, column, bytes, wbuf,
-+ oob_required, page,
-+ (ops->mode == MTD_OPS_RAW));
- if (ret)
- break;
-
-@@ -4719,6 +4719,9 @@ int nand_scan_tail(struct mtd_info *mtd)
- }
- }
-
-+ if (!chip->write_page)
-+ chip->write_page = nand_write_page;
-+
- /*
- * Check ECC mode, default to software if 3byte/512byte hardware ECC is
- * selected and we have 256 byte pagesize fallback to software ECC
---- a/include/linux/mtd/rawnand.h
-+++ b/include/linux/mtd/rawnand.h
-@@ -860,6 +860,7 @@ struct nand_manufacturer_ops {
- * structure which is shared among multiple independent
- * devices.
- * @priv: [OPTIONAL] pointer to private chip data
-+ * @write_page: [REPLACEABLE] High-level page write function
- * @manufacturer: [INTERN] Contains manufacturer information
- */
-
-@@ -883,6 +884,9 @@ struct nand_chip {
- int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
- int (*erase)(struct mtd_info *mtd, int page);
- int (*scan_bbt)(struct mtd_info *mtd);
-+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint32_t offset, int data_len, const uint8_t *buf,
-+ int oob_required, int page, int raw);
- int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
- int feature_addr, uint8_t *subfeature_para);
- int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch
deleted file mode 100644
index 3b82347dbb..0000000000
--- a/target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch
+++ /dev/null
@@ -1,4437 +0,0 @@
-From 0e1c4e3c97b83b4e7da65b1c56f0a7d40736ac53 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:05:17 +0100
-Subject: [PATCH 39/53] mtd: add mt7621 nand support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/Kconfig | 6 +
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/bmt.c | 750 ++++++++++++
- drivers/mtd/nand/bmt.h | 80 ++
- drivers/mtd/nand/dev-nand.c | 63 +
- drivers/mtd/nand/mt6575_typedefs.h | 340 ++++++
- drivers/mtd/nand/mtk_nand2.c | 2304 +++++++++++++++++++++++++++++++++++
- drivers/mtd/nand/mtk_nand2.h | 452 +++++++
- drivers/mtd/nand/nand_base.c | 6 +-
- drivers/mtd/nand/nand_def.h | 123 ++
- drivers/mtd/nand/nand_device_list.h | 55 +
- drivers/mtd/nand/partition.h | 115 ++
- 13 files changed, 4311 insertions(+), 3 deletions(-)
- create mode 100644 drivers/mtd/nand/bmt.c
- create mode 100644 drivers/mtd/nand/bmt.h
- create mode 100644 drivers/mtd/nand/dev-nand.c
- create mode 100644 drivers/mtd/nand/mt6575_typedefs.h
- create mode 100644 drivers/mtd/nand/mtk_nand2.c
- create mode 100644 drivers/mtd/nand/mtk_nand2.h
- create mode 100644 drivers/mtd/nand/nand_def.h
- create mode 100644 drivers/mtd/nand/nand_device_list.h
- create mode 100644 drivers/mtd/nand/partition.h
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -563,4 +563,10 @@ config MTD_NAND_MTK
- Enables support for NAND controller on MTK SoCs.
- This controller is found on mt27xx, mt81xx, mt65xx SoCs.
-
-+config MTK_MTD_NAND
-+ tristate "Support for MTK SoC NAND controller"
-+ depends on SOC_MT7621
-+ select MTD_NAND_IDS
-+ select MTD_NAND_ECC
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_HISI504) +
- obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
- obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
- obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o
-+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand2.o bmt.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_amd.o
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.c
-@@ -0,0 +1,750 @@
-+#include "bmt.h"
-+
-+typedef struct
-+{
-+ char signature[3];
-+ u8 version;
-+ u8 bad_count; // bad block count in pool
-+ u8 mapped_count; // mapped block count in pool
-+ u8 checksum;
-+ u8 reseverd[13];
-+} phys_bmt_header;
-+
-+typedef struct
-+{
-+ phys_bmt_header header;
-+ bmt_entry table[MAX_BMT_SIZE];
-+} phys_bmt_struct;
-+
-+typedef struct
-+{
-+ char signature[3];
-+} bmt_oob_data;
-+
-+static char MAIN_SIGNATURE[] = "BMT";
-+static char OOB_SIGNATURE[] = "bmt";
-+#define SIGNATURE_SIZE (3)
-+
-+#define MAX_DAT_SIZE 0x1000
-+#define MAX_OOB_SIZE 0x80
-+
-+static struct mtd_info *mtd_bmt;
-+static struct nand_chip *nand_chip_bmt;
-+#define BLOCK_SIZE_BMT (1 << nand_chip_bmt->phys_erase_shift)
-+#define PAGE_SIZE_BMT (1 << nand_chip_bmt->page_shift)
-+
-+#define OFFSET(block) ((block) * BLOCK_SIZE_BMT)
-+#define PAGE_ADDR(block) ((block) * BLOCK_SIZE_BMT / PAGE_SIZE_BMT)
-+
-+/*********************************************************************
-+* Flash is splited into 2 parts, system part is for normal system *
-+* system usage, size is system_block_count, another is replace pool *
-+* +-------------------------------------------------+ *
-+* | system_block_count | bmt_block_count | *
-+* +-------------------------------------------------+ *
-+*********************************************************************/
-+static u32 total_block_count; // block number in flash
-+static u32 system_block_count;
-+static int bmt_block_count; // bmt table size
-+// static int bmt_count; // block used in bmt
-+static int page_per_block; // page per count
-+
-+static u32 bmt_block_index; // bmt block index
-+static bmt_struct bmt; // dynamic created global bmt table
-+
-+static u8 dat_buf[MAX_DAT_SIZE];
-+static u8 oob_buf[MAX_OOB_SIZE];
-+static bool pool_erased;
-+
-+/***************************************************************
-+*
-+* Interface adaptor for preloader/uboot/kernel
-+* These interfaces operate on physical address, read/write
-+* physical data.
-+*
-+***************************************************************/
-+int nand_read_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ return mtk_nand_exec_read_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob);
-+}
-+
-+bool nand_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_bad_hw(mtd_bmt, offset);
-+}
-+
-+bool nand_erase_bmt(u32 offset)
-+{
-+ int status;
-+ if (offset < 0x20000)
-+ {
-+ MSG(INIT, "erase offset: 0x%x\n", offset);
-+ }
-+
-+ status = mtk_nand_erase_hw(mtd_bmt, offset / PAGE_SIZE_BMT); // as nand_chip structure doesn't have a erase function defined
-+ if (status & NAND_STATUS_FAIL)
-+ return false;
-+ else
-+ return true;
-+}
-+
-+int mark_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_markbad_hw(mtd_bmt, offset); //mark_block_bad_hw(offset);
-+}
-+
-+bool nand_write_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ if (mtk_nand_exec_write_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob))
-+ return false;
-+ else
-+ return true;
-+}
-+
-+/***************************************************************
-+* *
-+* static internal function *
-+* *
-+***************************************************************/
-+static void dump_bmt_info(bmt_struct * bmt)
-+{
-+ int i;
-+
-+ MSG(INIT, "BMT v%d. total %d mapping:\n", bmt->version, bmt->mapped_count);
-+ for (i = 0; i < bmt->mapped_count; i++)
-+ {
-+ MSG(INIT, "\t0x%x -> 0x%x\n", bmt->table[i].bad_index, bmt->table[i].mapped_index);
-+ }
-+}
-+
-+static bool match_bmt_signature(u8 * dat, u8 * oob)
-+{
-+
-+ if (memcmp(dat + MAIN_SIGNATURE_OFFSET, MAIN_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ return false;
-+ }
-+
-+ if (memcmp(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ MSG(INIT, "main signature match, oob signature doesn't match, but ignore\n");
-+ }
-+ return true;
-+}
-+
-+static u8 cal_bmt_checksum(phys_bmt_struct * phys_table, int bmt_size)
-+{
-+ int i;
-+ u8 checksum = 0;
-+ u8 *dat = (u8 *) phys_table;
-+
-+ checksum += phys_table->header.version;
-+ checksum += phys_table->header.mapped_count;
-+
-+ dat += sizeof(phys_bmt_header);
-+ for (i = 0; i < bmt_size * sizeof(bmt_entry); i++)
-+ {
-+ checksum += dat[i];
-+ }
-+
-+ return checksum;
-+}
-+
-+
-+static int is_block_mapped(int index)
-+{
-+ int i;
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (index == bmt.table[i].mapped_index)
-+ return i;
-+ }
-+ return -1;
-+}
-+
-+static bool is_page_used(u8 * dat, u8 * oob)
-+{
-+ return ((oob[OOB_INDEX_OFFSET] != 0xFF) || (oob[OOB_INDEX_OFFSET + 1] != 0xFF));
-+}
-+
-+static bool valid_bmt_data(phys_bmt_struct * phys_table)
-+{
-+ int i;
-+ u8 checksum = cal_bmt_checksum(phys_table, bmt_block_count);
-+
-+ // checksum correct?
-+ if (phys_table->header.checksum != checksum)
-+ {
-+ MSG(INIT, "BMT Data checksum error: %x %x\n", phys_table->header.checksum, checksum);
-+ return false;
-+ }
-+
-+ MSG(INIT, "BMT Checksum is: 0x%x\n", phys_table->header.checksum);
-+
-+ // block index correct?
-+ for (i = 0; i < phys_table->header.mapped_count; i++)
-+ {
-+ if (phys_table->table[i].bad_index >= total_block_count || phys_table->table[i].mapped_index >= total_block_count || phys_table->table[i].mapped_index < system_block_count)
-+ {
-+ MSG(INIT, "index error: bad_index: %d, mapped_index: %d\n", phys_table->table[i].bad_index, phys_table->table[i].mapped_index);
-+ return false;
-+ }
-+ }
-+
-+ // pass check, valid bmt.
-+ MSG(INIT, "Valid BMT, version v%d\n", phys_table->header.version);
-+ return true;
-+}
-+
-+static void fill_nand_bmt_buffer(bmt_struct * bmt, u8 * dat, u8 * oob)
-+{
-+ phys_bmt_struct phys_bmt;
-+
-+ dump_bmt_info(bmt);
-+
-+ // fill phys_bmt_struct structure with bmt_struct
-+ memset(&phys_bmt, 0xFF, sizeof(phys_bmt));
-+
-+ memcpy(phys_bmt.header.signature, MAIN_SIGNATURE, SIGNATURE_SIZE);
-+ phys_bmt.header.version = BMT_VERSION;
-+ // phys_bmt.header.bad_count = bmt->bad_count;
-+ phys_bmt.header.mapped_count = bmt->mapped_count;
-+ memcpy(phys_bmt.table, bmt->table, sizeof(bmt_entry) * bmt_block_count);
-+
-+ phys_bmt.header.checksum = cal_bmt_checksum(&phys_bmt, bmt_block_count);
-+
-+ memcpy(dat + MAIN_SIGNATURE_OFFSET, &phys_bmt, sizeof(phys_bmt));
-+ memcpy(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE);
-+}
-+
-+// return valid index if found BMT, else return 0
-+static int load_bmt_data(int start, int pool_size)
-+{
-+ int bmt_index = start + pool_size - 1; // find from the end
-+ phys_bmt_struct phys_table;
-+ int i;
-+
-+ MSG(INIT, "[%s]: begin to search BMT from block 0x%x\n", __FUNCTION__, bmt_index);
-+
-+ for (bmt_index = start + pool_size - 1; bmt_index >= start; bmt_index--)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(bmt_index)))
-+ {
-+ MSG(INIT, "Skip bad block: %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!nand_read_page_bmt(PAGE_ADDR(bmt_index), dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Error found when read block %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!match_bmt_signature(dat_buf, oob_buf))
-+ {
-+ continue;
-+ }
-+
-+ MSG(INIT, "Match bmt signature @ block: 0x%x\n", bmt_index);
-+
-+ memcpy(&phys_table, dat_buf + MAIN_SIGNATURE_OFFSET, sizeof(phys_table));
-+
-+ if (!valid_bmt_data(&phys_table))
-+ {
-+ MSG(INIT, "BMT data is not correct %d\n", bmt_index);
-+ continue;
-+ } else
-+ {
-+ bmt.mapped_count = phys_table.header.mapped_count;
-+ bmt.version = phys_table.header.version;
-+ // bmt.bad_count = phys_table.header.bad_count;
-+ memcpy(bmt.table, phys_table.table, bmt.mapped_count * sizeof(bmt_entry));
-+
-+ MSG(INIT, "bmt found at block: %d, mapped block: %d\n", bmt_index, bmt.mapped_count);
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (!nand_block_bad_bmt(OFFSET(bmt.table[i].bad_index)))
-+ {
-+ MSG(INIT, "block 0x%x is not mark bad, should be power lost last time\n", bmt.table[i].bad_index);
-+ mark_block_bad_bmt(OFFSET(bmt.table[i].bad_index));
-+ }
-+ }
-+
-+ return bmt_index;
-+ }
-+ }
-+
-+ MSG(INIT, "bmt block not found!\n");
-+ return 0;
-+}
-+
-+/*************************************************************************
-+* Find an available block and erase. *
-+* start_from_end: if true, find available block from end of flash. *
-+* else, find from the beginning of the pool *
-+* need_erase: if true, all unmapped blocks in the pool will be erased *
-+*************************************************************************/
-+static int find_available_block(bool start_from_end)
-+{
-+ int i; // , j;
-+ int block = system_block_count;
-+ int direction;
-+ // int avail_index = 0;
-+ MSG(INIT, "Try to find_available_block, pool_erase: %d\n", pool_erased);
-+
-+ // erase all un-mapped blocks in pool when finding avaliable block
-+ if (!pool_erased)
-+ {
-+ MSG(INIT, "Erase all un-mapped blocks in pool\n");
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block + i);
-+ continue;
-+ }
-+//if(block==4095)
-+//{
-+// continue;
-+//}
-+
-+ if (is_block_mapped(block + i) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block + i);
-+ continue;
-+ }
-+
-+ if (!nand_erase_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Erase block 0x%x failed\n", block + i);
-+ mark_block_bad_bmt(OFFSET(block + i));
-+ }
-+ }
-+
-+ pool_erased = 1;
-+ }
-+
-+ if (start_from_end)
-+ {
-+ block = total_block_count - 1;
-+ direction = -1;
-+ } else
-+ {
-+ block = system_block_count;
-+ direction = 1;
-+ }
-+
-+ for (i = 0; i < bmt_block_count; i++, block += direction)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (is_block_mapped(block) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Find block 0x%x available\n", block);
-+ return block;
-+ }
-+
-+ return 0;
-+}
-+
-+static unsigned short get_bad_index_from_oob(u8 * oob_buf)
-+{
-+ unsigned short index;
-+ memcpy(&index, oob_buf + OOB_INDEX_OFFSET, OOB_INDEX_SIZE);
-+
-+ return index;
-+}
-+
-+void set_bad_index_to_oob(u8 * oob, u16 index)
-+{
-+ memcpy(oob + OOB_INDEX_OFFSET, &index, sizeof(index));
-+}
-+
-+static int migrate_from_bad(int offset, u8 * write_dat, u8 * write_oob)
-+{
-+ int page;
-+ int error_block = offset / BLOCK_SIZE_BMT;
-+ int error_page = (offset / PAGE_SIZE_BMT) % page_per_block;
-+ int to_index;
-+
-+ memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ to_index = find_available_block(false);
-+
-+ if (!to_index)
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return 0;
-+ }
-+
-+ { // migrate error page first
-+ MSG(INIT, "Write error page: 0x%x\n", error_page);
-+ if (!write_dat)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + error_page, dat_buf, NULL);
-+ write_dat = dat_buf;
-+ }
-+ // memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ if (error_block < system_block_count)
-+ set_bad_index_to_oob(oob_buf, error_block); // if error_block is already a mapped block, original mapping index is in OOB.
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + error_page, write_dat, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + error_page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+
-+ for (page = 0; page < page_per_block; page++)
-+ {
-+ if (page != error_page)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + page, dat_buf, oob_buf);
-+ if (is_page_used(dat_buf, oob_buf))
-+ {
-+ if (error_block < system_block_count)
-+ {
-+ set_bad_index_to_oob(oob_buf, error_block);
-+ }
-+ MSG(INIT, "\tmigrate page 0x%x to page 0x%x\n", PAGE_ADDR(error_block) + page, PAGE_ADDR(to_index) + page);
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + page, dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+ }
-+ }
-+
-+ MSG(INIT, "Migrate from 0x%x to 0x%x done!\n", error_block, to_index);
-+
-+ return to_index;
-+}
-+
-+static bool write_bmt_to_flash(u8 * dat, u8 * oob)
-+{
-+ bool need_erase = true;
-+ MSG(INIT, "Try to write BMT\n");
-+
-+ if (bmt_block_index == 0)
-+ {
-+ // if we don't have index, we don't need to erase found block as it has been erased in find_available_block()
-+ need_erase = false;
-+ if (!(bmt_block_index = find_available_block(true)))
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return false;
-+ }
-+ }
-+
-+ MSG(INIT, "Find BMT block: 0x%x\n", bmt_block_index);
-+
-+ // write bmt to flash
-+ if (need_erase)
-+ {
-+ if (!nand_erase_bmt(OFFSET(bmt_block_index)))
-+ {
-+ MSG(INIT, "BMT block erase fail, mark bad: 0x%x\n", bmt_block_index);
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+ }
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(bmt_block_index), dat, oob))
-+ {
-+ MSG(INIT, "Write BMT data fail, need to write again\n");
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+
-+ MSG(INIT, "Write BMT data to block 0x%x success\n", bmt_block_index);
-+ return true;
-+}
-+
-+/*******************************************************************
-+* Reconstruct bmt, called when found bmt info doesn't match bad
-+* block info in flash.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+bmt_struct *reconstruct_bmt(bmt_struct * bmt)
-+{
-+ int i;
-+ int index = system_block_count;
-+ unsigned short bad_index;
-+ int mapped;
-+
-+ // init everything in BMT struct
-+ bmt->version = BMT_VERSION;
-+ bmt->bad_count = 0;
-+ bmt->mapped_count = 0;
-+
-+ memset(bmt->table, 0, bmt_block_count * sizeof(bmt_entry));
-+
-+ for (i = 0; i < bmt_block_count; i++, index++)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(index)))
-+ {
-+ MSG(INIT, "Skip bad block: 0x%x\n", index);
-+ // bmt->bad_count++;
-+ continue;
-+ }
-+
-+ MSG(INIT, "read page: 0x%x\n", PAGE_ADDR(index));
-+ nand_read_page_bmt(PAGE_ADDR(index), dat_buf, oob_buf);
-+ /* if (mtk_nand_read_page_hw(PAGE_ADDR(index), dat_buf))
-+ {
-+ MSG(INIT, "Error when read block %d\n", bmt_block_index);
-+ continue;
-+ } */
-+
-+ if ((bad_index = get_bad_index_from_oob(oob_buf)) >= system_block_count)
-+ {
-+ MSG(INIT, "get bad index: 0x%x\n", bad_index);
-+ if (bad_index != 0xFFFF)
-+ MSG(INIT, "Invalid bad index found in block 0x%x, bad index 0x%x\n", index, bad_index);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Block 0x%x is mapped to bad block: 0x%x\n", index, bad_index);
-+
-+ if (!nand_block_bad_bmt(OFFSET(bad_index)))
-+ {
-+ MSG(INIT, "\tbut block 0x%x is not marked as bad, invalid mapping\n", bad_index);
-+ continue; // no need to erase here, it will be erased later when trying to write BMT
-+ }
-+
-+ if ((mapped = is_block_mapped(bad_index)) >= 0)
-+ {
-+ MSG(INIT, "bad block 0x%x is mapped to 0x%x, should be caused by power lost, replace with one\n", bmt->table[mapped].bad_index, bmt->table[mapped].mapped_index);
-+ bmt->table[mapped].mapped_index = index; // use new one instead.
-+ } else
-+ {
-+ // add mapping to BMT
-+ bmt->table[bmt->mapped_count].bad_index = bad_index;
-+ bmt->table[bmt->mapped_count].mapped_index = index;
-+ bmt->mapped_count++;
-+ }
-+
-+ MSG(INIT, "Add mapping: 0x%x -> 0x%x to BMT\n", bad_index, index);
-+
-+ }
-+
-+ MSG(INIT, "Scan replace pool done, mapped block: %d\n", bmt->mapped_count);
-+ // dump_bmt_info(bmt);
-+
-+ // fill NAND BMT buffer
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(bmt, dat_buf, oob_buf);
-+
-+ // write BMT back
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "TRAGEDY: cannot find a place to write BMT!!!!\n");
-+ }
-+
-+ return bmt;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Init bmt from nand. Reconstruct if not found or data error
-+*
-+* Parameter:
-+* size: size of bmt and replace pool
-+*
-+* Return:
-+* NULL for failure, and a bmt struct for success
-+*******************************************************************/
-+bmt_struct *init_bmt(struct nand_chip * chip, int size)
-+{
-+ struct mtk_nand_host *host;
-+
-+ if (size > 0 && size < MAX_BMT_SIZE)
-+ {
-+ MSG(INIT, "Init bmt table, size: %d\n", size);
-+ bmt_block_count = size;
-+ } else
-+ {
-+ MSG(INIT, "Invalid bmt table size: %d\n", size);
-+ return NULL;
-+ }
-+ nand_chip_bmt = chip;
-+ system_block_count = chip->chipsize >> chip->phys_erase_shift;
-+ total_block_count = bmt_block_count + system_block_count;
-+ page_per_block = BLOCK_SIZE_BMT / PAGE_SIZE_BMT;
-+ host = (struct mtk_nand_host *)chip->priv;
-+ mtd_bmt = host->mtd;
-+
-+ MSG(INIT, "mtd_bmt: %p, nand_chip_bmt: %p\n", mtd_bmt, nand_chip_bmt);
-+ MSG(INIT, "bmt count: %d, system count: %d\n", bmt_block_count, system_block_count);
-+
-+ // set this flag, and unmapped block in pool will be erased.
-+ pool_erased = 0;
-+ memset(bmt.table, 0, size * sizeof(bmt_entry));
-+ if ((bmt_block_index = load_bmt_data(system_block_count, size)))
-+ {
-+ MSG(INIT, "Load bmt data success @ block 0x%x\n", bmt_block_index);
-+ dump_bmt_info(&bmt);
-+ return &bmt;
-+ } else
-+ {
-+ MSG(INIT, "Load bmt data fail, need re-construct!\n");
-+#ifndef __UBOOT_NAND__ // BMT is not re-constructed in UBOOT.
-+ if (reconstruct_bmt(&bmt))
-+ return &bmt;
-+ else
-+#endif
-+ return NULL;
-+ }
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Update BMT.
-+*
-+* Parameter:
-+* offset: update block/page offset.
-+* reason: update reason, see update_reason_t for reason.
-+* dat/oob: data and oob buffer for write fail.
-+*
-+* Return:
-+* Return true for success, and false for failure.
-+*******************************************************************/
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob)
-+{
-+ int map_index;
-+ int orig_bad_block = -1;
-+ // int bmt_update_index;
-+ int i;
-+ int bad_index = offset / BLOCK_SIZE_BMT;
-+
-+#ifndef MTK_NAND_BMT
-+ return false;
-+#endif
-+ if (reason == UPDATE_WRITE_FAIL)
-+ {
-+ MSG(INIT, "Write fail, need to migrate\n");
-+ if (!(map_index = migrate_from_bad(offset, dat, oob)))
-+ {
-+ MSG(INIT, "migrate fail\n");
-+ return false;
-+ }
-+ } else
-+ {
-+ if (!(map_index = find_available_block(false)))
-+ {
-+ MSG(INIT, "Cannot find block in pool\n");
-+ return false;
-+ }
-+ }
-+
-+ // now let's update BMT
-+ if (bad_index >= system_block_count) // mapped block become bad, find original bad block
-+ {
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (bmt.table[i].mapped_index == bad_index)
-+ {
-+ orig_bad_block = bmt.table[i].bad_index;
-+ break;
-+ }
-+ }
-+ // bmt.bad_count++;
-+ MSG(INIT, "Mapped block becomes bad, orig bad block is 0x%x\n", orig_bad_block);
-+
-+ bmt.table[i].mapped_index = map_index;
-+ } else
-+ {
-+ bmt.table[bmt.mapped_count].mapped_index = map_index;
-+ bmt.table[bmt.mapped_count].bad_index = bad_index;
-+ bmt.mapped_count++;
-+ }
-+
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(&bmt, dat_buf, oob_buf);
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ return false;
-+
-+ mark_block_bad_bmt(offset);
-+
-+ return true;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Given an block index, return mapped index if it's mapped, else
-+* return given index.
-+*
-+* Parameter:
-+* index: given an block index. This value cannot exceed
-+* system_block_count.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+u16 get_mapping_block_index(int index)
-+{
-+ int i;
-+#ifndef MTK_NAND_BMT
-+ return index;
-+#endif
-+ if (index > system_block_count)
-+ {
-+ return index;
-+ }
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (bmt.table[i].bad_index == index)
-+ {
-+ return bmt.table[i].mapped_index;
-+ }
-+ }
-+
-+ return index;
-+}
-+#ifdef __KERNEL_NAND__
-+EXPORT_SYMBOL_GPL(init_bmt);
-+EXPORT_SYMBOL_GPL(update_bmt);
-+EXPORT_SYMBOL_GPL(get_mapping_block_index);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("MediaTek");
-+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.h
-@@ -0,0 +1,80 @@
-+#ifndef __BMT_H__
-+#define __BMT_H__
-+
-+#include "nand_def.h"
-+
-+#if defined(__PRELOADER_NAND__)
-+
-+#include "nand.h"
-+
-+#elif defined(__UBOOT_NAND__)
-+
-+#include <linux/mtd/nand.h>
-+#include "mtk_nand2.h"
-+
-+#elif defined(__KERNEL_NAND__)
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/rawnand.h>
-+#include <linux/module.h>
-+#include "mtk_nand2.h"
-+
-+#endif
-+
-+
-+#define MAX_BMT_SIZE (0x80)
-+#define BMT_VERSION (1) // initial version
-+
-+#define MAIN_SIGNATURE_OFFSET (0)
-+#define OOB_SIGNATURE_OFFSET (1)
-+#define OOB_INDEX_OFFSET (29)
-+#define OOB_INDEX_SIZE (2)
-+#define FAKE_INDEX (0xAAAA)
-+
-+typedef struct _bmt_entry_
-+{
-+ u16 bad_index; // bad block index
-+ u16 mapped_index; // mapping block index in the replace pool
-+} bmt_entry;
-+
-+typedef enum
-+{
-+ UPDATE_ERASE_FAIL,
-+ UPDATE_WRITE_FAIL,
-+ UPDATE_UNMAPPED_BLOCK,
-+ UPDATE_REASON_COUNT,
-+} update_reason_t;
-+
-+typedef struct
-+{
-+ bmt_entry table[MAX_BMT_SIZE];
-+ u8 version;
-+ u8 mapped_count; // mapped block count in pool
-+ u8 bad_count; // bad block count in pool. Not used in V1
-+} bmt_struct;
-+
-+/***************************************************************
-+* *
-+* Interface BMT need to use *
-+* *
-+***************************************************************/
-+extern bool mtk_nand_exec_read_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+extern int mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_erase_hw(struct mtd_info *mtd, int page);
-+extern int mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_exec_write_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+
-+
-+/***************************************************************
-+* *
-+* Different function interface for preloader/uboot/kernel *
-+* *
-+***************************************************************/
-+void set_bad_index_to_oob(u8 * oob, u16 index);
-+
-+
-+bmt_struct *init_bmt(struct nand_chip *nand, int size);
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob);
-+unsigned short get_mapping_block_index(int index);
-+
-+#endif // #ifndef __BMT_H__
---- /dev/null
-+++ b/drivers/mtd/nand/dev-nand.c
-@@ -0,0 +1,63 @@
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include "mt6575_typedefs.h"
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define NFI_base RALINK_NAND_CTRL_BASE
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+#define NFIECC_base RALINK_NANDECC_CTRL_BASE
-+#define MT7621_NFI_IRQ_ID SURFBOARDINT_NAND
-+#define MT7621_NFIECC_IRQ_ID SURFBOARDINT_NAND_ECC
-+
-+#define SURFBOARDINT_NAND 22
-+#define SURFBOARDINT_NAND_ECC 23
-+
-+static struct resource MT7621_resource_nand[] = {
-+ {
-+ .start = NFI_base,
-+ .end = NFI_base + 0x1A0,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = NFIECC_base,
-+ .end = NFIECC_base + 0x150,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = MT7621_NFI_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = MT7621_NFIECC_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device MT7621_nand_dev = {
-+ .name = "MT7621-NAND",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(MT7621_resource_nand),
-+ .resource = MT7621_resource_nand,
-+ .dev = {
-+ .platform_data = &mt7621_nand_hw,
-+ },
-+};
-+
-+
-+int __init mtk_nand_register(void)
-+{
-+
-+ int retval = 0;
-+
-+ retval = platform_device_register(&MT7621_nand_dev);
-+ if (retval != 0) {
-+ printk(KERN_ERR "register nand device fail\n");
-+ return retval;
-+ }
-+
-+
-+ return retval;
-+}
-+arch_initcall(mtk_nand_register);
---- /dev/null
-+++ b/drivers/mtd/nand/mt6575_typedefs.h
-@@ -0,0 +1,340 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+/*****************************************************************************
-+* Copyright Statement:
-+* --------------------
-+* This software is protected by Copyright and the information contained
-+* herein is confidential. The software may not be copied and the information
-+* contained herein may not be used or disclosed except with the written
-+* permission of MediaTek Inc. (C) 2008
-+*
-+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
-+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
-+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
-+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
-+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
-+*
-+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
-+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
-+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+*
-+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
-+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
-+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
-+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
-+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
-+*
-+*****************************************************************************/
-+
-+#ifndef _MT6575_TYPEDEFS_H
-+#define _MT6575_TYPEDEFS_H
-+
-+#if defined (__KERNEL_NAND__)
-+#include <linux/bug.h>
-+#else
-+#define true 1
-+#define false 0
-+#define bool u8
-+#endif
-+
-+// ---------------------------------------------------------------------------
-+// Basic Type Definitions
-+// ---------------------------------------------------------------------------
-+
-+typedef volatile unsigned char *P_kal_uint8;
-+typedef volatile unsigned short *P_kal_uint16;
-+typedef volatile unsigned int *P_kal_uint32;
-+
-+typedef long LONG;
-+typedef unsigned char UBYTE;
-+typedef short SHORT;
-+
-+typedef signed char kal_int8;
-+typedef signed short kal_int16;
-+typedef signed int kal_int32;
-+typedef long long kal_int64;
-+typedef unsigned char kal_uint8;
-+typedef unsigned short kal_uint16;
-+typedef unsigned int kal_uint32;
-+typedef unsigned long long kal_uint64;
-+typedef char kal_char;
-+
-+typedef unsigned int *UINT32P;
-+typedef volatile unsigned short *UINT16P;
-+typedef volatile unsigned char *UINT8P;
-+typedef unsigned char *U8P;
-+
-+typedef volatile unsigned char *P_U8;
-+typedef volatile signed char *P_S8;
-+typedef volatile unsigned short *P_U16;
-+typedef volatile signed short *P_S16;
-+typedef volatile unsigned int *P_U32;
-+typedef volatile signed int *P_S32;
-+typedef unsigned long long *P_U64;
-+typedef signed long long *P_S64;
-+
-+typedef unsigned char U8;
-+typedef signed char S8;
-+typedef unsigned short U16;
-+typedef signed short S16;
-+typedef unsigned int U32;
-+typedef signed int S32;
-+typedef unsigned long long U64;
-+typedef signed long long S64;
-+//typedef unsigned char bool;
-+
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int UINT32;
-+typedef unsigned short USHORT;
-+typedef signed char INT8;
-+typedef signed short INT16;
-+typedef signed int INT32;
-+typedef unsigned int DWORD;
-+typedef void VOID;
-+typedef unsigned char BYTE;
-+typedef float FLOAT;
-+
-+typedef char *LPCSTR;
-+typedef short *LPWSTR;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Constants
-+// ---------------------------------------------------------------------------
-+
-+#define IMPORT EXTERN
-+#ifndef __cplusplus
-+ #define EXTERN extern
-+#else
-+ #define EXTERN extern "C"
-+#endif
-+#define LOCAL static
-+#define GLOBAL
-+#define EXPORT GLOBAL
-+
-+#define EQ ==
-+#define NEQ !=
-+#define AND &&
-+#define OR ||
-+#define XOR(A,B) ((!(A) AND (B)) OR ((A) AND !(B)))
-+
-+#ifndef FALSE
-+ #define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+ #define TRUE (1)
-+#endif
-+
-+#ifndef NULL
-+ #define NULL (0)
-+#endif
-+
-+//enum boolean {false, true};
-+enum {RX, TX, NONE};
-+
-+#ifndef BOOL
-+typedef unsigned char BOOL;
-+#endif
-+
-+typedef enum {
-+ KAL_FALSE = 0,
-+ KAL_TRUE = 1,
-+} kal_bool;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Type Casting
-+// ---------------------------------------------------------------------------
-+
-+#define AS_INT32(x) (*(INT32 *)((void*)x))
-+#define AS_INT16(x) (*(INT16 *)((void*)x))
-+#define AS_INT8(x) (*(INT8 *)((void*)x))
-+
-+#define AS_UINT32(x) (*(UINT32 *)((void*)x))
-+#define AS_UINT16(x) (*(UINT16 *)((void*)x))
-+#define AS_UINT8(x) (*(UINT8 *)((void*)x))
-+
-+
-+// ---------------------------------------------------------------------------
-+// Register Manipulations
-+// ---------------------------------------------------------------------------
-+
-+#define READ_REGISTER_UINT32(reg) \
-+ (*(volatile UINT32 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT32(reg, val) \
-+ (*(volatile UINT32 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT16(reg) \
-+ (*(volatile UINT16 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT16(reg, val) \
-+ (*(volatile UINT16 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT8(reg) \
-+ (*(volatile UINT8 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT8(reg, val) \
-+ (*(volatile UINT8 * const)(reg)) = (val)
-+
-+#define INREG8(x) READ_REGISTER_UINT8((UINT8*)((void*)(x)))
-+#define OUTREG8(x, y) WRITE_REGISTER_UINT8((UINT8*)((void*)(x)), (UINT8)(y))
-+#define SETREG8(x, y) OUTREG8(x, INREG8(x)|(y))
-+#define CLRREG8(x, y) OUTREG8(x, INREG8(x)&~(y))
-+#define MASKREG8(x, y, z) OUTREG8(x, (INREG8(x)&~(y))|(z))
-+
-+#define INREG16(x) READ_REGISTER_UINT16((UINT16*)((void*)(x)))
-+#define OUTREG16(x, y) WRITE_REGISTER_UINT16((UINT16*)((void*)(x)),(UINT16)(y))
-+#define SETREG16(x, y) OUTREG16(x, INREG16(x)|(y))
-+#define CLRREG16(x, y) OUTREG16(x, INREG16(x)&~(y))
-+#define MASKREG16(x, y, z) OUTREG16(x, (INREG16(x)&~(y))|(z))
-+
-+#define INREG32(x) READ_REGISTER_UINT32((UINT32*)((void*)(x)))
-+#define OUTREG32(x, y) WRITE_REGISTER_UINT32((UINT32*)((void*)(x)), (UINT32)(y))
-+#define SETREG32(x, y) OUTREG32(x, INREG32(x)|(y))
-+#define CLRREG32(x, y) OUTREG32(x, INREG32(x)&~(y))
-+#define MASKREG32(x, y, z) OUTREG32(x, (INREG32(x)&~(y))|(z))
-+
-+
-+#define DRV_Reg8(addr) INREG8(addr)
-+#define DRV_WriteReg8(addr, data) OUTREG8(addr, data)
-+#define DRV_SetReg8(addr, data) SETREG8(addr, data)
-+#define DRV_ClrReg8(addr, data) CLRREG8(addr, data)
-+
-+#define DRV_Reg16(addr) INREG16(addr)
-+#define DRV_WriteReg16(addr, data) OUTREG16(addr, data)
-+#define DRV_SetReg16(addr, data) SETREG16(addr, data)
-+#define DRV_ClrReg16(addr, data) CLRREG16(addr, data)
-+
-+#define DRV_Reg32(addr) INREG32(addr)
-+#define DRV_WriteReg32(addr, data) OUTREG32(addr, data)
-+#define DRV_SetReg32(addr, data) SETREG32(addr, data)
-+#define DRV_ClrReg32(addr, data) CLRREG32(addr, data)
-+
-+// !!! DEPRECATED, WILL BE REMOVED LATER !!!
-+#define DRV_Reg(addr) DRV_Reg16(addr)
-+#define DRV_WriteReg(addr, data) DRV_WriteReg16(addr, data)
-+#define DRV_SetReg(addr, data) DRV_SetReg16(addr, data)
-+#define DRV_ClrReg(addr, data) DRV_ClrReg16(addr, data)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Compiler Time Deduction Macros
-+// ---------------------------------------------------------------------------
-+
-+#define _MASK_OFFSET_1(x, n) ((x) & 0x1) ? (n) :
-+#define _MASK_OFFSET_2(x, n) _MASK_OFFSET_1((x), (n)) _MASK_OFFSET_1((x) >> 1, (n) + 1)
-+#define _MASK_OFFSET_4(x, n) _MASK_OFFSET_2((x), (n)) _MASK_OFFSET_2((x) >> 2, (n) + 2)
-+#define _MASK_OFFSET_8(x, n) _MASK_OFFSET_4((x), (n)) _MASK_OFFSET_4((x) >> 4, (n) + 4)
-+#define _MASK_OFFSET_16(x, n) _MASK_OFFSET_8((x), (n)) _MASK_OFFSET_8((x) >> 8, (n) + 8)
-+#define _MASK_OFFSET_32(x, n) _MASK_OFFSET_16((x), (n)) _MASK_OFFSET_16((x) >> 16, (n) + 16)
-+
-+#define MASK_OFFSET_ERROR (0xFFFFFFFF)
-+
-+#define MASK_OFFSET(x) (_MASK_OFFSET_32(x, 0) MASK_OFFSET_ERROR)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Assertions
-+// ---------------------------------------------------------------------------
-+
-+#ifndef ASSERT
-+ #define ASSERT(expr) BUG_ON(!(expr))
-+#endif
-+
-+#ifndef NOT_IMPLEMENTED
-+ #define NOT_IMPLEMENTED() BUG_ON(1)
-+#endif
-+
-+#define STATIC_ASSERT(pred) STATIC_ASSERT_X(pred, __LINE__)
-+#define STATIC_ASSERT_X(pred, line) STATIC_ASSERT_XX(pred, line)
-+#define STATIC_ASSERT_XX(pred, line) \
-+ extern char assertion_failed_at_##line[(pred) ? 1 : -1]
-+
-+// ---------------------------------------------------------------------------
-+// Resolve Compiler Warnings
-+// ---------------------------------------------------------------------------
-+
-+#define NOT_REFERENCED(x) { (x) = (x); }
-+
-+
-+// ---------------------------------------------------------------------------
-+// Utilities
-+// ---------------------------------------------------------------------------
-+
-+#define MAXIMUM(A,B) (((A)>(B))?(A):(B))
-+#define MINIMUM(A,B) (((A)<(B))?(A):(B))
-+
-+#define ARY_SIZE(x) (sizeof((x)) / sizeof((x[0])))
-+#define DVT_DELAYMACRO(u4Num) \
-+{ \
-+ UINT32 u4Count = 0 ; \
-+ for (u4Count = 0; u4Count < u4Num; u4Count++ ); \
-+} \
-+
-+#define A68351B 0
-+#define B68351B 1
-+#define B68351D 2
-+#define B68351E 3
-+#define UNKNOWN_IC_VERSION 0xFF
-+
-+/* NAND driver */
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern unsigned int CFG_BLOCKSIZE;
-+
-+#endif // _MT6575_TYPEDEFS_H
-+
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand2.c
-@@ -0,0 +1,2345 @@
-+/******************************************************************************
-+* mtk_nand2.c - MTK NAND Flash Device Driver
-+ *
-+* Copyright 2009-2012 MediaTek Co.,Ltd.
-+ *
-+* DESCRIPTION:
-+* This file provid the other drivers nand relative functions
-+ *
-+* modification history
-+* ----------------------------------------
-+* v3.0, 11 Feb 2010, mtk
-+* ----------------------------------------
-+******************************************************************************/
-+#include "nand_def.h"
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/rawnand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/proc_fs.h>
-+#include <linux/time.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+#include <asm/cacheflush.h>
-+#include <asm/uaccess.h>
-+#include <linux/miscdevice.h>
-+#include "mtk_nand2.h"
-+#include "nand_device_list.h"
-+
-+#include "bmt.h"
-+#include "partition.h"
-+
-+unsigned int CFG_BLOCKSIZE;
-+
-+static int shift_on_bbt = 0;
-+int mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page);
-+
-+static const char * const probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+#define NAND_CMD_STATUS_MULTI 0x71
-+
-+void show_stack(struct task_struct *tsk, unsigned long *sp);
-+extern void mt_irq_set_sens(unsigned int irq, unsigned int sens);
-+extern void mt_irq_set_polarity(unsigned int irq,unsigned int polarity);
-+
-+struct mtk_nand_host mtk_nand_host; /* include mtd_info and nand_chip structs */
-+struct mtk_nand_host_hw mt7621_nand_hw = {
-+ .nfi_bus_width = 8,
-+ .nfi_access_timing = NFI_DEFAULT_ACCESS_TIMING,
-+ .nfi_cs_num = NFI_CS_NUM,
-+ .nand_sec_size = 512,
-+ .nand_sec_shift = 9,
-+ .nand_ecc_size = 2048,
-+ .nand_ecc_bytes = 32,
-+ .nand_ecc_mode = NAND_ECC_HW,
-+};
-+
-+
-+/*******************************************************************************
-+ * Gloable Varible Definition
-+ *******************************************************************************/
-+
-+#define NFI_ISSUE_COMMAND(cmd, col_addr, row_addr, col_num, row_num) \
-+ do { \
-+ DRV_WriteReg(NFI_CMD_REG16,cmd);\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_CMD_STATE);\
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);\
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, row_addr);\
-+ DRV_WriteReg(NFI_ADDRNOB_REG16, col_num | (row_num<<ADDR_ROW_NOB_SHIFT));\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_ADDR_STATE);\
-+ }while(0);
-+
-+//-------------------------------------------------------------------------------
-+static struct NAND_CMD g_kCMD;
-+static u32 g_u4ChipVer;
-+bool g_bInitDone;
-+static bool g_bcmdstatus;
-+static u32 g_value = 0;
-+static int g_page_size;
-+
-+BOOL g_bHwEcc = true;
-+
-+
-+extern void nand_release_device(struct mtd_info *mtd);
-+extern int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state);
-+
-+#if defined(MTK_NAND_BMT)
-+static bmt_struct *g_bmt;
-+#endif
-+struct mtk_nand_host *host;
-+extern struct mtd_partition g_pasStatic_Partition[];
-+int part_num = NUM_PARTITIONS;
-+int manu_id;
-+int dev_id;
-+
-+/* this constant was taken from linux/nand/nand.h v 3.14
-+ * in later versions it seems it was removed in order to save a bit of space
-+ */
-+#define NAND_MAX_OOBSIZE 774
-+static u8 local_oob_buf[NAND_MAX_OOBSIZE];
-+
-+static u8 nand_badblock_offset = 0;
-+
-+static void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ this->bbt[block >> 3] &= ~(0x03 << (block & 0x6));
-+ this->bbt[block >> 3] |= (flag & 0x3) << (block & 0x6);
-+}
-+
-+static int nand_bbt_get(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ return (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
-+}
-+
-+void nand_enable_clock(void)
-+{
-+ //enable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+void nand_disable_clock(void)
-+{
-+ //disable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+struct nand_ecclayout {
-+ __u32 eccbytes;
-+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
-+ __u32 oobavail;
-+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
-+};
-+
-+static struct nand_ecclayout *layout;
-+
-+static struct nand_ecclayout nand_oob_16 = {
-+ .eccbytes = 8,
-+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
-+ .oobfree = {{1, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_64 = {
-+ .eccbytes = 32,
-+ .eccpos = {32, 33, 34, 35, 36, 37, 38, 39,
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_128 = {
-+ .eccbytes = 64,
-+ .eccpos = {
-+ 64, 65, 66, 67, 68, 69, 70, 71,
-+ 72, 73, 74, 75, 76, 77, 78, 79,
-+ 80, 81, 82, 83, 84, 85, 86, 86,
-+ 88, 89, 90, 91, 92, 93, 94, 95,
-+ 96, 97, 98, 99, 100, 101, 102, 103,
-+ 104, 105, 106, 107, 108, 109, 110, 111,
-+ 112, 113, 114, 115, 116, 117, 118, 119,
-+ 120, 121, 122, 123, 124, 125, 126, 127},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 7}, {33, 7}, {41, 7}, {49, 7}, {57, 6}}
-+};
-+
-+flashdev_info devinfo;
-+
-+void dump_nfi(void)
-+{
-+}
-+
-+void dump_ecc(void)
-+{
-+}
-+
-+u32
-+nand_virt_to_phys_add(u32 va)
-+{
-+ u32 pageOffset = (va & (PAGE_SIZE - 1));
-+ pgd_t *pgd;
-+ pmd_t *pmd;
-+ pte_t *pte;
-+ u32 pa;
-+
-+ if (virt_addr_valid(va))
-+ return __virt_to_phys(va);
-+
-+ if (NULL == current) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR ,current is NULL! \n");
-+ return 0;
-+ }
-+
-+ if (NULL == current->mm) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR current->mm is NULL! tgid=0x%x, name=%s \n", current->tgid, current->comm);
-+ return 0;
-+ }
-+
-+ pgd = pgd_offset(current->mm, va); /* what is tsk->mm */
-+ if (pgd_none(*pgd) || pgd_bad(*pgd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pgd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pmd = pmd_offset((pud_t *)pgd, va);
-+ if (pmd_none(*pmd) || pmd_bad(*pmd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pmd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pte = pte_offset_map(pmd, va);
-+ if (pte_present(*pte)) {
-+ pa = (pte_val(*pte) & (PAGE_MASK)) | pageOffset;
-+ return pa;
-+ }
-+
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR va=0x%x, pte invalid! \n", va);
-+ return 0;
-+}
-+EXPORT_SYMBOL(nand_virt_to_phys_add);
-+
-+bool
-+get_device_info(u16 id, u32 ext_id, flashdev_info * pdevinfo)
-+{
-+ u32 index;
-+ for (index = 0; gen_FlashTable[index].id != 0; index++) {
-+ if (id == gen_FlashTable[index].id && ext_id == gen_FlashTable[index].ext_id) {
-+ pdevinfo->id = gen_FlashTable[index].id;
-+ pdevinfo->ext_id = gen_FlashTable[index].ext_id;
-+ pdevinfo->blocksize = gen_FlashTable[index].blocksize;
-+ pdevinfo->addr_cycle = gen_FlashTable[index].addr_cycle;
-+ pdevinfo->iowidth = gen_FlashTable[index].iowidth;
-+ pdevinfo->timmingsetting = gen_FlashTable[index].timmingsetting;
-+ pdevinfo->advancedmode = gen_FlashTable[index].advancedmode;
-+ pdevinfo->pagesize = gen_FlashTable[index].pagesize;
-+ pdevinfo->sparesize = gen_FlashTable[index].sparesize;
-+ pdevinfo->totalsize = gen_FlashTable[index].totalsize;
-+ memcpy(pdevinfo->devciename, gen_FlashTable[index].devciename, sizeof(pdevinfo->devciename));
-+ printk(KERN_INFO "Device found in MTK table, ID: %x, EXT_ID: %x\n", id, ext_id);
-+
-+ goto find;
-+ }
-+ }
-+
-+find:
-+ if (0 == pdevinfo->id) {
-+ printk(KERN_INFO "Device not found, ID: %x\n", id);
-+ return false;
-+ } else {
-+ return true;
-+ }
-+}
-+
-+static void
-+ECC_Config(struct mtk_nand_host_hw *hw,u32 ecc_bit)
-+{
-+ u32 u4ENCODESize;
-+ u32 u4DECODESize;
-+ u32 ecc_bit_cfg = ECC_CNFG_ECC4;
-+
-+ switch(ecc_bit){
-+ case 4:
-+ ecc_bit_cfg = ECC_CNFG_ECC4;
-+ break;
-+ case 8:
-+ ecc_bit_cfg = ECC_CNFG_ECC8;
-+ break;
-+ case 10:
-+ ecc_bit_cfg = ECC_CNFG_ECC10;
-+ break;
-+ case 12:
-+ ecc_bit_cfg = ECC_CNFG_ECC12;
-+ break;
-+ default:
-+ break;
-+ }
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+ do {
-+ } while (!DRV_Reg16(ECC_DECIDLE_REG16));
-+
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+ do {
-+ } while (!DRV_Reg32(ECC_ENCIDLE_REG32));
-+
-+ /* setup FDM register base */
-+ DRV_WriteReg32(ECC_FDMADDR_REG32, NFI_FDM0L_REG32);
-+
-+ /* Sector + FDM */
-+ u4ENCODESize = (hw->nand_sec_size + 8) << 3;
-+ /* Sector + FDM + YAFFS2 meta data bits */
-+ u4DECODESize = ((hw->nand_sec_size + 8) << 3) + ecc_bit * 13;
-+
-+ /* configure ECC decoder && encoder */
-+ DRV_WriteReg32(ECC_DECCNFG_REG32, ecc_bit_cfg | DEC_CNFG_NFI | DEC_CNFG_EMPTY_EN | (u4DECODESize << DEC_CNFG_CODE_SHIFT));
-+
-+ DRV_WriteReg32(ECC_ENCCNFG_REG32, ecc_bit_cfg | ENC_CNFG_NFI | (u4ENCODESize << ENC_CNFG_MSG_SHIFT));
-+ NFI_SET_REG32(ECC_DECCNFG_REG32, DEC_CNFG_EL);
-+}
-+
-+static void
-+ECC_Decode_Start(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_EN);
-+}
-+
-+static void
-+ECC_Decode_End(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+}
-+
-+static void
-+ECC_Encode_Start(void)
-+{
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE))
-+ ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_EN);
-+}
-+
-+static void
-+ECC_Encode_End(void)
-+{
-+ /* wait for device returning idle */
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+}
-+
-+static bool
-+mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u32 u4PageAddr)
-+{
-+ bool bRet = true;
-+ u16 u2SectorDoneMask = 1 << u4SecIndex;
-+ u32 u4ErrorNumDebug, i, u4ErrNum;
-+ u32 timeout = 0xFFFF;
-+ // int el;
-+ u32 au4ErrBitLoc[6];
-+ u32 u4ErrByteLoc, u4BitOffset;
-+ u32 u4ErrBitLoc1th, u4ErrBitLoc2nd;
-+
-+ //4 // Wait for Decode Done
-+ while (0 == (u2SectorDoneMask & DRV_Reg16(ECC_DECDONE_REG16))) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ /* We will manually correct the error bits in the last sector, not all the sectors of the page! */
-+ memset(au4ErrBitLoc, 0x0, sizeof(au4ErrBitLoc));
-+ u4ErrorNumDebug = DRV_Reg32(ECC_DECENUM_REG32);
-+ u4ErrNum = DRV_Reg32(ECC_DECENUM_REG32) >> (u4SecIndex << 2);
-+ u4ErrNum &= 0xF;
-+
-+ if (u4ErrNum) {
-+ if (0xF == u4ErrNum) {
-+ mtd->ecc_stats.failed++;
-+ bRet = false;
-+ printk(KERN_ERR"mtk_nand: UnCorrectable at PageAddr=%d\n", u4PageAddr);
-+ } else {
-+ for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
-+ au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
-+ u4ErrBitLoc1th = au4ErrBitLoc[i] & 0x1FFF;
-+ if (u4ErrBitLoc1th < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc1th / 8;
-+ u4BitOffset = u4ErrBitLoc1th % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ }
-+ u4ErrBitLoc2nd = (au4ErrBitLoc[i] >> 16) & 0x1FFF;
-+ if (0 != u4ErrBitLoc2nd) {
-+ if (u4ErrBitLoc2nd < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc2nd / 8;
-+ u4BitOffset = u4ErrBitLoc2nd % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ //printk(KERN_ERR"UnCorrectable High ErrLoc=%d\n", au4ErrBitLoc[i]);
-+ }
-+ }
-+ }
-+ }
-+ if (0 == (DRV_Reg16(ECC_DECFER_REG16) & (1 << u4SecIndex)))
-+ bRet = false;
-+ }
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_RFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+ while (FIFO_RD_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) < u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_WFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while (FIFO_WR_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) > u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_status_ready(u32 u4Status)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while ((DRV_Reg32(NFI_STA_REG32) & u4Status) != 0) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_reset(void)
-+{
-+ int timeout = 0xFFFF;
-+ if (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+ while (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ timeout--;
-+ if (!timeout)
-+ MSG(INIT, "Wait for NFI_MASTERSTA timeout\n");
-+ }
-+ }
-+ /* issue reset operation */
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+
-+ return mtk_nand_status_ready(STA_NFI_FSM_MASK | STA_NAND_BUSY) && mtk_nand_RFIFOValidSize(0) && mtk_nand_WFIFOValidSize(0);
-+}
-+
-+static void
-+mtk_nand_set_mode(u16 u2OpMode)
-+{
-+ u16 u2Mode = DRV_Reg16(NFI_CNFG_REG16);
-+ u2Mode &= ~CNFG_OP_MODE_MASK;
-+ u2Mode |= u2OpMode;
-+ DRV_WriteReg16(NFI_CNFG_REG16, u2Mode);
-+}
-+
-+static void
-+mtk_nand_set_autoformat(bool bEnable)
-+{
-+ if (bEnable)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+}
-+
-+static void
-+mtk_nand_configure_fdm(u16 u2FDMSize)
-+{
-+ NFI_CLN_REG16(NFI_PAGEFMT_REG16, PAGEFMT_FDM_MASK | PAGEFMT_FDM_ECC_MASK);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_SHIFT);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_ECC_SHIFT);
-+}
-+
-+static void
-+mtk_nand_configure_lock(void)
-+{
-+ u32 u4WriteColNOB = 2;
-+ u32 u4WriteRowNOB = 3;
-+ u32 u4EraseColNOB = 0;
-+ u32 u4EraseRowNOB = 3;
-+ DRV_WriteReg16(NFI_LOCKANOB_REG16,
-+ (u4WriteColNOB << PROG_CADD_NOB_SHIFT) | (u4WriteRowNOB << PROG_RADD_NOB_SHIFT) | (u4EraseColNOB << ERASE_CADD_NOB_SHIFT) | (u4EraseRowNOB << ERASE_RADD_NOB_SHIFT));
-+
-+ if (CHIPVER_ECO_1 == g_u4ChipVer) {
-+ int i;
-+ for (i = 0; i < 16; ++i) {
-+ DRV_WriteReg32(NFI_LOCK00ADD_REG32 + (i << 1), 0xFFFFFFFF);
-+ DRV_WriteReg32(NFI_LOCK00FMT_REG32 + (i << 1), 0xFFFFFFFF);
-+ }
-+ //DRV_WriteReg16(NFI_LOCKANOB_REG16, 0x0);
-+ DRV_WriteReg32(NFI_LOCKCON_REG32, 0xFFFFFFFF);
-+ DRV_WriteReg16(NFI_LOCK_REG16, NFI_LOCK_ON);
-+ }
-+}
-+
-+static bool
-+mtk_nand_pio_ready(void)
-+{
-+ int count = 0;
-+ while (!(DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1)) {
-+ count++;
-+ if (count > 0xffff) {
-+ printk("PIO_DIRDY timeout\n");
-+ return false;
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_set_command(u16 command)
-+{
-+ mb();
-+ DRV_WriteReg16(NFI_CMD_REG16, command);
-+ return mtk_nand_status_ready(STA_CMD_STATE);
-+}
-+
-+static bool
-+mtk_nand_set_address(u32 u4ColAddr, u32 u4RowAddr, u16 u2ColNOB, u16 u2RowNOB)
-+{
-+ mb();
-+ DRV_WriteReg32(NFI_COLADDR_REG32, u4ColAddr);
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, u4RowAddr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, u2ColNOB | (u2RowNOB << ADDR_ROW_NOB_SHIFT));
-+ return mtk_nand_status_ready(STA_ADDR_STATE);
-+}
-+
-+static void mtk_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
-+{
-+ if (ctrl & NAND_ALE) {
-+ mtk_nand_set_address(dat, 0, 1, 0);
-+ } else if (ctrl & NAND_CLE) {
-+ mtk_nand_reset();
-+ mtk_nand_set_mode(0x6000);
-+ mtk_nand_set_command(dat);
-+ }
-+}
-+
-+static bool
-+mtk_nand_check_RW_count(u16 u2WriteSize)
-+{
-+ u32 timeout = 0xFFFF;
-+ u16 u2SecNum = u2WriteSize >> 9;
-+
-+ while (ADDRCNTR_CNTR(DRV_Reg16(NFI_ADDRCNTR_REG16)) < u2SecNum) {
-+ timeout--;
-+ if (0 == timeout) {
-+ printk(KERN_INFO "[%s] timeout\n", __FUNCTION__);
-+ return false;
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_ready_for_read(struct nand_chip *nand, u32 u4RowAddr, u32 u4ColAddr, bool full, u8 * buf)
-+{
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ bool bRet = false;
-+ u16 sec_num = 1 << (nand->page_shift - 9);
-+ u32 col_addr = u4ColAddr;
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ if (!mtk_nand_reset())
-+ goto cleanup;
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+
-+ mtk_nand_set_mode(CNFG_OP_READ);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Decode_Start();
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto cleanup;
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto cleanup;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_ready_for_write(struct nand_chip *nand, u32 u4RowAddr, u32 col_addr, bool full, u8 * buf)
-+{
-+ bool bRet = false;
-+ u32 sec_num = 1 << (nand->page_shift - 9);
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ if (!mtk_nand_reset())
-+ return false;
-+
-+ mtk_nand_set_mode(CNFG_OP_PRGM);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Encode_Start();
-+
-+ if (!mtk_nand_set_command(NAND_CMD_SEQIN))
-+ goto cleanup;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_check_dececc_done(u32 u4SecNum)
-+{
-+ u32 timeout, dec_mask;
-+
-+ timeout = 0xffff;
-+ dec_mask = (1 << u4SecNum) - 1;
-+ while ((dec_mask != DRV_Reg(ECC_DECDONE_REG16)) && timeout > 0)
-+ timeout--;
-+ if (timeout == 0) {
-+ MSG(VERIFY, "ECC_DECDONE: timeout\n");
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_mcu_read_data(u8 * buf, u32 length)
-+{
-+ int timeout = 0xffff;
-+ u32 i;
-+ u32 *buf32 = (u32 *) buf;
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ //DRV_WriteReg32(NFI_STRADDR_REG32, 0);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf++ = (u8) DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf32++ = DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_read_page_data(struct mtd_info *mtd, u8 * pDataBuf, u32 u4Size)
-+{
-+ return mtk_nand_mcu_read_data(pDataBuf, u4Size);
-+}
-+
-+static bool
-+mtk_nand_mcu_write_data(struct mtd_info *mtd, const u8 * buf, u32 length)
-+{
-+ u32 timeout = 0xFFFF;
-+ u32 i;
-+ u32 *pBuf32;
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ pBuf32 = (u32 *) buf;
-+
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *buf++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *pBuf32++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_write_page_data(struct mtd_info *mtd, u8 * buf, u32 size)
-+{
-+ return mtk_nand_mcu_write_data(mtd, buf, size);
-+}
-+
-+static void
-+mtk_nand_read_fdm_data(u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i;
-+ u32 *pBuf32 = (u32 *) pDataBuf;
-+
-+ if (pBuf32) {
-+ for (i = 0; i < u4SecNum; ++i) {
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0L_REG32 + (i << 1));
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0M_REG32 + (i << 1));
-+ }
-+ }
-+}
-+
-+static u8 fdm_buf[64];
-+static void
-+mtk_nand_write_fdm_data(struct nand_chip *chip, u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i, j;
-+ u8 checksum = 0;
-+ bool empty = true;
-+ struct nand_oobfree *free_entry;
-+ u32 *pBuf32;
-+
-+ memcpy(fdm_buf, pDataBuf, u4SecNum * 8);
-+
-+ free_entry = layout->oobfree;
-+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free_entry[i].length; i++) {
-+ for (j = 0; j < free_entry[i].length; j++) {
-+ if (pDataBuf[free_entry[i].offset + j] != 0xFF)
-+ empty = false;
-+ checksum ^= pDataBuf[free_entry[i].offset + j];
-+ }
-+ }
-+
-+ if (!empty) {
-+ fdm_buf[free_entry[i - 1].offset + free_entry[i - 1].length] = checksum;
-+ }
-+
-+ pBuf32 = (u32 *) fdm_buf;
-+ for (i = 0; i < u4SecNum; ++i) {
-+ DRV_WriteReg32(NFI_FDM0L_REG32 + (i << 1), *pBuf32++);
-+ DRV_WriteReg32(NFI_FDM0M_REG32 + (i << 1), *pBuf32++);
-+ }
-+}
-+
-+static void
-+mtk_nand_stop_read(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ mtk_nand_reset();
-+ if (g_bHwEcc)
-+ ECC_Decode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+static void
-+mtk_nand_stop_write(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ if (g_bHwEcc)
-+ ECC_Encode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+bool
-+mtk_nand_exec_read_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ u8 *buf;
-+ bool bRet = true;
-+ struct nand_chip *nand = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+
-+ buf = pPageBuf;
-+ if (mtk_nand_ready_for_read(nand, u4RowAddr, 0, true, buf)) {
-+ int j;
-+ for (j = 0 ; j < u4SecNum; j++) {
-+ if (!mtk_nand_read_page_data(mtd, buf+j*512, 512))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_dececc_done(j+1))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_bch_error(mtd, buf+j*512, j, u4RowAddr))
-+ bRet = false;
-+ }
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ bRet = false;
-+
-+ mtk_nand_read_fdm_data(pFDMBuf, u4SecNum);
-+ mtk_nand_stop_read();
-+ }
-+
-+ return bRet;
-+}
-+
-+int
-+mtk_nand_exec_write_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+ u8 *buf;
-+ u8 status;
-+
-+ MSG(WRITE, "mtk_nand_exec_write_page, page: 0x%x\n", u4RowAddr);
-+
-+ buf = pPageBuf;
-+
-+ if (mtk_nand_ready_for_write(chip, u4RowAddr, 0, true, buf)) {
-+ mtk_nand_write_fdm_data(chip, pFDMBuf, u4SecNum);
-+ (void)mtk_nand_write_page_data(mtd, buf, u4PageSize);
-+ (void)mtk_nand_check_RW_count(u4PageSize);
-+ mtk_nand_stop_write();
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ;
-+ }
-+
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL)
-+ return -EIO;
-+ return 0;
-+}
-+
-+static int
-+get_start_end_block(struct mtd_info *mtd, int block, int *start_blk, int *end_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+
-+ *start_blk = 0;
-+ for (i = 0; i <= part_num; i++)
-+ {
-+ if (i == part_num)
-+ {
-+ // try the last reset partition
-+ *end_blk = (chip->chipsize >> chip->phys_erase_shift) - 1;
-+ if (*start_blk <= *end_blk)
-+ {
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ }
-+ }
-+ // skip All partition entry
-+ else if (g_pasStatic_Partition[i].size == MTDPART_SIZ_FULL)
-+ {
-+ continue;
-+ }
-+ *end_blk = *start_blk + (g_pasStatic_Partition[i].size >> chip->phys_erase_shift) - 1;
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ *start_blk = *end_blk + 1;
-+ }
-+ if (*start_blk > *end_blk)
-+ {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static int
-+block_remap(struct mtd_info *mtd, int block)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int start_blk, end_blk;
-+ int j, block_offset;
-+ int bad_block = 0;
-+
-+ if (chip->bbt == NULL) {
-+ printk("ERROR!! no bbt table for block_remap\n");
-+ return -1;
-+ }
-+
-+ if (get_start_end_block(mtd, block, &start_blk, &end_blk) < 0) {
-+ printk("ERROR!! can not find start_blk and end_blk\n");
-+ return -1;
-+ }
-+
-+ block_offset = block - start_blk;
-+ for (j = start_blk; j <= end_blk;j++) {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) == 0x0) {
-+ if (!block_offset)
-+ break;
-+ block_offset--;
-+ } else {
-+ bad_block++;
-+ }
-+ }
-+ if (j <= end_blk) {
-+ return j;
-+ } else {
-+ // remap to the bad block
-+ for (j = end_blk; bad_block > 0; j--)
-+ {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) != 0x0)
-+ {
-+ bad_block--;
-+ if (bad_block <= block_offset)
-+ return j;
-+ }
-+ }
-+ }
-+
-+ printk("Error!! block_remap error\n");
-+ return -1;
-+}
-+
-+int
-+check_block_remap(struct mtd_info *mtd, int block)
-+{
-+ if (shift_on_bbt)
-+ return block_remap(mtd, block);
-+ else
-+ return block;
-+}
-+EXPORT_SYMBOL(check_block_remap);
-+
-+
-+static int
-+write_next_on_fail(struct mtd_info *mtd, char *write_buf, int page, int * to_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i, j, to_page = 0, first_page;
-+ char *buf, *oob;
-+ int start_blk = 0, end_blk;
-+ int mapped_block;
-+ int page_per_block_bit = chip->phys_erase_shift - chip->page_shift;
-+ int block = page >> page_per_block_bit;
-+
-+ // find next available block in the same MTD partition
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+
-+ get_start_end_block(mtd, block, &start_blk, &end_blk);
-+
-+ buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL | GFP_DMA);
-+ if (buf == NULL)
-+ return -1;
-+
-+ oob = buf + mtd->writesize;
-+ for ((*to_blk) = block + 1; (*to_blk) <= end_blk ; (*to_blk)++) {
-+ if (nand_bbt_get(mtd, (*to_blk) << page_per_block_bit) == 0) {
-+ int status;
-+ status = mtk_nand_erase_hw(mtd, (*to_blk) << page_per_block_bit);
-+ if (status & NAND_STATUS_FAIL) {
-+ mtk_nand_block_markbad_hw(mtd, (*to_blk) << chip->phys_erase_shift);
-+ nand_bbt_set(mtd, (*to_blk) << page_per_block_bit, 0x3);
-+ } else {
-+ /* good block */
-+ to_page = (*to_blk) << page_per_block_bit;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!to_page) {
-+ kfree(buf);
-+ return -1;
-+ }
-+
-+ first_page = (page >> page_per_block_bit) << page_per_block_bit;
-+ for (i = 0; i < (1 << page_per_block_bit); i++) {
-+ if ((first_page + i) != page) {
-+ mtk_nand_read_oob_hw(mtd, chip, (first_page+i));
-+ for (j = 0; j < mtd->oobsize; j++)
-+ if (chip->oob_poi[j] != (unsigned char)0xff)
-+ break;
-+ if (j < mtd->oobsize) {
-+ mtk_nand_exec_read_page(mtd, (first_page+i), mtd->writesize, buf, oob);
-+ memset(oob, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)buf, oob) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ } else {
-+ memset(chip->oob_poi, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)write_buf, chip->oob_poi) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, write_buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ }
-+
-+ kfree(buf);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset,
-+ int data_len, const u8 * buf, int oob_required, int page, int raw)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_exec_write_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, (u8 *)buf, chip->oob_poi)) {
-+ MSG(INIT, "write fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, UPDATE_WRITE_FAIL, (u8 *) buf, chip->oob_poi)) {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ {
-+ int new_blk;
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (write_next_on_fail(mtd, (char *)buf, page_in_block + mapped_block * page_per_block, &new_blk) != 0)
-+ {
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ return NAND_STATUS_FAIL;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ break;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static void
-+mtk_nand_command_bp(struct mtd_info *mtd, unsigned int command, int column, int page_addr)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+
-+ switch (command) {
-+ case NAND_CMD_SEQIN:
-+ memset(g_kCMD.au1OOB, 0xFF, sizeof(g_kCMD.au1OOB));
-+ g_kCMD.pDataBuf = NULL;
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_PAGEPROG:
-+ if (g_kCMD.pDataBuf || (0xFF != g_kCMD.au1OOB[nand_badblock_offset])) {
-+ u8 *pDataBuf = g_kCMD.pDataBuf ? g_kCMD.pDataBuf : nand->buffers->databuf;
-+ mtk_nand_exec_write_page(mtd, g_kCMD.u4RowAddr, mtd->writesize, pDataBuf, g_kCMD.au1OOB);
-+ g_kCMD.u4RowAddr = (u32) - 1;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+ }
-+ break;
-+
-+ case NAND_CMD_READOOB:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column + mtd->writesize;
-+ break;
-+
-+ case NAND_CMD_READ0:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_ERASE1:
-+ nand->state=FL_ERASING;
-+ (void)mtk_nand_reset();
-+ mtk_nand_set_mode(CNFG_OP_ERASE);
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE1);
-+ (void)mtk_nand_set_address(0, page_addr, 0, devinfo.addr_cycle - 2);
-+ break;
-+
-+ case NAND_CMD_ERASE2:
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE2);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ break;
-+
-+ case NAND_CMD_STATUS:
-+ (void)mtk_nand_reset();
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ mtk_nand_set_mode(CNFG_READ_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_STATUS);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD | (1 << CON_NFI_NOB_SHIFT));
-+ g_bcmdstatus = true;
-+ break;
-+
-+ case NAND_CMD_RESET:
-+ (void)mtk_nand_reset();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, INTR_RST_DONE_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_RESET);
-+ DRV_WriteReg16(NFI_BASE+0x44, 0xF1);
-+ while(!(DRV_Reg16(NFI_INTR_REG16)&INTR_RST_DONE_EN))
-+ ;
-+ break;
-+
-+ case NAND_CMD_READID:
-+ mtk_nand_reset();
-+ /* Disable HW ECC */
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN | CNFG_BYTE_RW);
-+ (void)mtk_nand_reset();
-+ mb();
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ (void)mtk_nand_set_command(NAND_CMD_READID);
-+ (void)mtk_nand_set_address(0, 0, 1, 0);
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_DATAR_STATE)
-+ ;
-+ break;
-+
-+ default:
-+ BUG();
-+ break;
-+ }
-+}
-+
-+static void
-+mtk_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ if ((chip == -1) && (false == g_bInitDone)) {
-+ struct nand_chip *nand = mtd->priv;
-+ struct mtk_nand_host *host = nand->priv;
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 spare_per_sector = mtd->oobsize / (mtd->writesize / 512);
-+ u32 ecc_bit = 4;
-+ u32 spare_bit = PAGEFMT_SPARE_16;
-+
-+ if (spare_per_sector >= 28) {
-+ spare_bit = PAGEFMT_SPARE_28;
-+ ecc_bit = 12;
-+ spare_per_sector = 28;
-+ } else if (spare_per_sector >= 27) {
-+ spare_bit = PAGEFMT_SPARE_27;
-+ ecc_bit = 8;
-+ spare_per_sector = 27;
-+ } else if (spare_per_sector >= 26) {
-+ spare_bit = PAGEFMT_SPARE_26;
-+ ecc_bit = 8;
-+ spare_per_sector = 26;
-+ } else if (spare_per_sector >= 16) {
-+ spare_bit = PAGEFMT_SPARE_16;
-+ ecc_bit = 4;
-+ spare_per_sector = 16;
-+ } else {
-+ MSG(INIT, "[NAND]: NFI not support oobsize: %x\n", spare_per_sector);
-+ ASSERT(0);
-+ }
-+ mtd->oobsize = spare_per_sector*(mtd->writesize/512);
-+ MSG(INIT, "[NAND]select ecc bit:%d, sparesize :%d spare_per_sector=%d\n",ecc_bit,mtd->oobsize,spare_per_sector);
-+ /* Setup PageFormat */
-+ if (4096 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_4K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ } else if (2048 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_2K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ }
-+ ECC_Config(hw,ecc_bit);
-+ g_bInitDone = true;
-+ }
-+ switch (chip) {
-+ case -1:
-+ break;
-+ case 0:
-+ case 1:
-+ /* Jun Shen, 2011.04.13 */
-+ /* Note: MT6577 EVB NAND is mounted on CS0, but FPGA is CS1 */
-+ DRV_WriteReg16(NFI_CSEL_REG16, chip);
-+ /* Jun Shen, 2011.04.13 */
-+ break;
-+ }
-+}
-+
-+static uint8_t
-+mtk_nand_read_byte(struct mtd_info *mtd)
-+{
-+ uint8_t retval = 0;
-+
-+ if (!mtk_nand_pio_ready()) {
-+ printk("pio ready timeout\n");
-+ retval = false;
-+ }
-+
-+ if (g_bcmdstatus) {
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mtk_nand_reset();
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+ g_bcmdstatus = false;
-+ } else
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+
-+ return retval;
-+}
-+
-+static void
-+mtk_nand_read_buf(struct mtd_info *mtd, uint8_t * buf, int len)
-+{
-+ struct nand_chip *nand = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr < u4PageSize) {
-+ if ((u4ColAddr == 0) && (len >= u4PageSize)) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, pkCMD->au1OOB);
-+ if (len > u4PageSize) {
-+ u32 u4Size = min(len - u4PageSize, sizeof(pkCMD->au1OOB));
-+ memcpy(buf + u4PageSize, pkCMD->au1OOB, u4Size);
-+ }
-+ } else {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ memcpy(buf, nand->buffers->databuf + u4ColAddr, len);
-+ }
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ } else {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u32 u4Size = min(len - u4Offset, sizeof(pkCMD->au1OOB));
-+ if (pkCMD->u4OOBRowAddr != pkCMD->u4RowAddr) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ }
-+ memcpy(buf, pkCMD->au1OOB + u4Offset, u4Size);
-+ }
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static void
-+mtk_nand_write_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+ int i4Size, i;
-+
-+ if (u4ColAddr >= u4PageSize) {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u8 *pOOB = pkCMD->au1OOB + u4Offset;
-+ i4Size = min(len, (int)(sizeof(pkCMD->au1OOB) - u4Offset));
-+ for (i = 0; i < i4Size; i++) {
-+ pOOB[i] &= buf[i];
-+ }
-+ } else {
-+ pkCMD->pDataBuf = (u8 *) buf;
-+ }
-+
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static int
-+mtk_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t * buf, int oob_required, int page)
-+{
-+ mtk_nand_write_buf(mtd, buf, mtd->writesize);
-+ mtk_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, int oob_required, int page)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr == 0) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, chip->oob_poi);
-+ pkCMD->u4ColAddr += u4PageSize + mtd->oobsize;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 * buf, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block,
-+ mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+ else
-+ return -EIO;
-+#endif
-+}
-+
-+int
-+mtk_nand_erase_hw(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+
-+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
-+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
-+
-+ return chip->waitfunc(mtd, chip);
-+}
-+
-+static int
-+mtk_nand_erase(struct mtd_info *mtd, int page)
-+{
-+ // get mapping
-+ struct nand_chip *chip = mtd->priv;
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int page_in_block = page % page_per_block;
-+ int block = page / page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+
-+ do {
-+ int status = mtk_nand_erase_hw(mtd, page_in_block + page_per_block * mapped_block);
-+
-+ if (status & NAND_STATUS_FAIL) {
-+#if defined (MTK_NAND_BMT)
-+ if (update_bmt( (page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_ERASE_FAIL, NULL, NULL))
-+ {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT success\n", mapped_block);
-+ return 0;
-+ } else {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT fail\n", mapped_block);
-+ return NAND_STATUS_FAIL;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else
-+ return NAND_STATUS_FAIL;
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob_raw(struct mtd_info *mtd, uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int res = 0;
-+ u32 colnob = 2, rawnob = devinfo.addr_cycle - 2;
-+ int randomread = 0;
-+ int read_len = 0;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+ if (len > spare_per_sector)
-+ randomread = 1;
-+ if (!randomread || !(devinfo.advancedmode & RAMDOM_READ)) {
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); // TODO: Fix this hard-code 16
-+ if (!mtk_nand_ready_for_read(chip, page_addr, col_addr, false, NULL)) {
-+ printk(KERN_WARNING "mtk_nand_ready_for_read return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_check_RW_count(read_len);
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ } else {
-+ col_addr = NAND_SECTOR_SIZE;
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ if (!mtk_nand_reset())
-+ goto error;
-+ mtk_nand_set_mode(0x6000);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+
-+ mtk_nand_set_autoformat(false);
-+
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto error;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, page_addr, colnob, rawnob))
-+ goto error;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ sector++;
-+ len -= read_len;
-+ mtk_nand_stop_read();
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_set_command(0x05))
-+ goto error;
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector);
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, 2);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+ if (!mtk_nand_status_ready(STA_ADDR_STATE))
-+ goto error;
-+ if (!mtk_nand_set_command(0xE0))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ }
-+error:
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ return res;
-+}
-+
-+static int
-+mtk_nand_write_oob_raw(struct mtd_info *mtd, const uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int write_len = 0;
-+ int status;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+
-+ while (len > 0) {
-+ write_len = min(len, spare_per_sector);
-+ col_addr = sector * (NAND_SECTOR_SIZE + spare_per_sector) + NAND_SECTOR_SIZE;
-+ if (!mtk_nand_ready_for_write(chip, page_addr, col_addr, false, NULL))
-+ return -EIO;
-+ if (!mtk_nand_mcu_write_data(mtd, buf + sector * spare_per_sector, write_len))
-+ return -EIO;
-+ (void)mtk_nand_check_RW_count(write_len);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk(KERN_INFO "status: %d\n", status);
-+ return -EIO;
-+ }
-+ len -= write_len;
-+ sector++;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i, iter;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+
-+ // copy ecc data
-+ for (i = 0; i < layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ local_oob_buf[iter] = chip->oob_poi[layout->eccpos[i]];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++)
-+ memcpy(&local_oob_buf[i * spare_per_sector], &chip->oob_poi[i * OOB_AVAI_PER_SECTOR], OOB_AVAI_PER_SECTOR);
-+
-+ return mtk_nand_write_oob_raw(mtd, local_oob_buf, page, mtd->oobsize);
-+}
-+
-+static int mtk_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt)
-+ {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_write_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block /* page */)) {
-+ MSG(INIT, "write oob fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_WRITE_FAIL, NULL, chip->oob_poi))
-+ {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, mapped_block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else {
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int page = block * (1 << (chip->phys_erase_shift - chip->page_shift));
-+ u8 buf[8];
-+
-+ memset(buf, 0xFF, 8);
-+ buf[0] = 0;
-+ return mtk_nand_write_oob_raw(mtd, buf, page, 8);
-+}
-+
-+static int
-+mtk_nand_block_markbad(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int ret;
-+ int mapped_block = block;
-+
-+ nand_get_device(chip, mtd, FL_WRITING);
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1) {
-+ printk("NAND mark bad failed\n");
-+ nand_release_device(mtd);
-+ return NAND_STATUS_FAIL;
-+ }
-+ }
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#endif
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+
-+int
-+mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i;
-+ u8 iter = 0;
-+
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (mtk_nand_read_oob_raw(mtd, chip->oob_poi, page, mtd->oobsize)) {
-+ printk(KERN_ERR "[%s]mtk_nand_read_oob_raw return failed\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ // adjust to ecc physical layout to memory layout
-+ /*********************************************************/
-+ /* FDM0 | ECC0 | FDM1 | ECC1 | FDM2 | ECC2 | FDM3 | ECC3 */
-+ /* 8B | 8B | 8B | 8B | 8B | 8B | 8B | 8B */
-+ /*********************************************************/
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+ // copy ecc data
-+ for (i = 0; i < layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ chip->oob_poi[layout->eccpos[i]] = local_oob_buf[iter];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++) {
-+ memcpy(&chip->oob_poi[i * OOB_AVAI_PER_SECTOR], &local_oob_buf[i * spare_per_sector], OOB_AVAI_PER_SECTOR);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ // allow to read oob even if the block is bad
-+ }
-+ if (mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block)!=0)
-+ return -1;
-+#endif
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int page_addr = (int)(ofs >> chip->page_shift);
-+ unsigned int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ unsigned char oob_buf[8];
-+
-+ page_addr &= ~(page_per_block - 1);
-+ if (mtk_nand_read_oob_raw(mtd, oob_buf, page_addr, sizeof(oob_buf))) {
-+ printk(KERN_WARNING "mtk_nand_read_oob_raw return error\n");
-+ return 1;
-+ }
-+
-+ if (oob_buf[0] != 0xff) {
-+ printk(KERN_WARNING "Bad block detected at 0x%x, oob_buf[0] is 0x%x\n", page_addr, oob_buf[0]);
-+ // dump_nfi();
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_block_bad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int block = (int)ofs >> chip->phys_erase_shift;
-+ int mapped_block = block;
-+ int ret;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ }
-+#endif
-+
-+ ret = mtk_nand_block_bad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#if defined (MTK_NAND_BMT)
-+ if (ret) {
-+ MSG(INIT, "Unmapped bad block: 0x%x\n", mapped_block);
-+ if (update_bmt(mapped_block << chip->phys_erase_shift, UPDATE_UNMAPPED_BLOCK, NULL, NULL)) {
-+ MSG(INIT, "Update BMT success\n");
-+ ret = 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ ret = 1;
-+ }
-+ }
-+#endif
-+
-+ return ret;
-+}
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+char gacBuf[4096 + 288];
-+
-+static int
-+mtk_nand_verify_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4PageSize = mtd->writesize;
-+ u32 *pSrc, *pDst;
-+ int i;
-+
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, gacBuf, gacBuf + u4PageSize);
-+
-+ pSrc = (u32 *) buf;
-+ pDst = (u32 *) gacBuf;
-+ len = len / sizeof(u32);
-+ for (i = 0; i < len; ++i) {
-+ if (*pSrc != *pDst) {
-+ MSG(VERIFY, "mtk_nand_verify_buf page fail at page %d\n", pkCMD->u4RowAddr);
-+ return -1;
-+ }
-+ pSrc++;
-+ pDst++;
-+ }
-+
-+ pSrc = (u32 *) chip->oob_poi;
-+ pDst = (u32 *) (gacBuf + u4PageSize);
-+
-+ if ((pSrc[0] != pDst[0]) || (pSrc[1] != pDst[1]) || (pSrc[2] != pDst[2]) || (pSrc[3] != pDst[3]) || (pSrc[4] != pDst[4]) || (pSrc[5] != pDst[5])) {
-+ // TODO: Ask Designer Why?
-+ //(pSrc[6] != pDst[6]) || (pSrc[7] != pDst[7]))
-+ MSG(VERIFY, "mtk_nand_verify_buf oob fail at page %d\n", pkCMD->u4RowAddr);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pSrc[0], pSrc[1], pSrc[2], pSrc[3], pSrc[4], pSrc[5], pSrc[6], pSrc[7]);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pDst[0], pDst[1], pDst[2], pDst[3], pDst[4], pDst[5], pDst[6], pDst[7]);
-+ return -1;
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static void
-+mtk_nand_init_hw(struct mtk_nand_host *host) {
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ MSG(INIT, "Enable NFI Clock\n");
-+ nand_enable_clock();
-+
-+ g_bInitDone = false;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+
-+ /* Set default NFI access timing control */
-+ DRV_WriteReg32(NFI_ACCCON_REG32, hw->nfi_access_timing);
-+ DRV_WriteReg16(NFI_CNFG_REG16, 0);
-+ DRV_WriteReg16(NFI_PAGEFMT_REG16, 0);
-+
-+ /* Reset the state machine and data FIFO, because flushing FIFO */
-+ (void)mtk_nand_reset();
-+
-+ /* Set the ECC engine */
-+ if (hw->nand_ecc_mode == NAND_ECC_HW) {
-+ MSG(INIT, "%s : Use HW ECC\n", MODULE_NAME);
-+ if (g_bHwEcc)
-+ NFI_SET_REG32(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ ECC_Config(host->hw,4);
-+ mtk_nand_configure_fdm(8);
-+ mtk_nand_configure_lock();
-+ }
-+
-+ NFI_SET_REG16(NFI_IOCON_REG16, 0x47);
-+}
-+
-+static int mtk_nand_dev_ready(struct mtd_info *mtd)
-+{
-+ return !(DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY);
-+}
-+
-+#define FACT_BBT_BLOCK_NUM 32 // use the latest 32 BLOCK for factory bbt table
-+#define FACT_BBT_OOB_SIGNATURE 1
-+#define FACT_BBT_SIGNATURE_LEN 7
-+const u8 oob_signature[] = "mtknand";
-+static u8 *fact_bbt = 0;
-+static u32 bbt_size = 0;
-+
-+static int
-+read_fact_bbt(struct mtd_info *mtd, unsigned int page)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ // read oob
-+ if (mtk_nand_read_oob_hw(mtd, chip, page)==0)
-+ {
-+ if (chip->oob_poi[nand_badblock_offset] != 0xFF)
-+ {
-+ printk("Bad Block on Page %x\n", page);
-+ return -1;
-+ }
-+ if (memcmp(&chip->oob_poi[FACT_BBT_OOB_SIGNATURE], oob_signature, FACT_BBT_SIGNATURE_LEN) != 0)
-+ {
-+ printk("compare signature failed %x\n", page);
-+ return -1;
-+ }
-+ if (mtk_nand_exec_read_page(mtd, page, mtd->writesize, chip->buffers->databuf, chip->oob_poi))
-+ {
-+ printk("Signature matched and data read!\n");
-+ memcpy(fact_bbt, chip->buffers->databuf, (bbt_size <= mtd->writesize)? bbt_size:mtd->writesize);
-+ return 0;
-+ }
-+
-+ }
-+ printk("failed at page %x\n", page);
-+ return -1;
-+}
-+
-+static int
-+load_fact_bbt(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+ u32 total_block;
-+
-+ total_block = 1 << (chip->chip_shift - chip->phys_erase_shift);
-+ bbt_size = total_block >> 2;
-+
-+ if ((!fact_bbt) && (bbt_size))
-+ fact_bbt = (u8 *)kmalloc(bbt_size, GFP_KERNEL);
-+ if (!fact_bbt)
-+ return -1;
-+
-+ for (i = total_block - 1; i >= (total_block - FACT_BBT_BLOCK_NUM); i--)
-+ {
-+ if (read_fact_bbt(mtd, i << (chip->phys_erase_shift - chip->page_shift)) == 0)
-+ {
-+ printk("load_fact_bbt success %d\n", i);
-+ return 0;
-+ }
-+
-+ }
-+ printk("load_fact_bbt failed\n");
-+ return -1;
-+}
-+
-+static int oob_mtk_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *oobregion)
-+{
-+ oobregion->length = 8;
-+ oobregion->offset = layout->eccpos[section * 8];
-+
-+ return 0;
-+}
-+
-+static int oob_mtk_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *oobregion)
-+{
-+ if (section >= (layout->eccbytes / 8)) {
-+ return -ERANGE;
-+ }
-+ oobregion->offset = layout->oobfree[section].offset;
-+ oobregion->length = layout->oobfree[section].length;
-+
-+ return 0;
-+}
-+
-+
-+static const struct mtd_ooblayout_ops oob_mtk_ops = {
-+ .ecc = oob_mtk_ooblayout_ecc,
-+ .free = oob_mtk_ooblayout_free,
-+};
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+ struct mtd_part_parser_data ppdata;
-+ struct mtk_nand_host_hw *hw;
-+ struct nand_chip *nand_chip;
-+ struct mtd_info *mtd;
-+ u8 ext_id1, ext_id2, ext_id3;
-+ int err = 0;
-+ int id;
-+ u32 ext_id;
-+ int i;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ hw = &mt7621_nand_hw;
-+ BUG_ON(!hw);
-+ /* Allocate memory for the device structure (and zero it) */
-+ host = kzalloc(sizeof(struct mtk_nand_host), GFP_KERNEL);
-+ if (!host) {
-+ MSG(INIT, "mtk_nand: failed to allocate device structure.\n");
-+ return -ENOMEM;
-+ }
-+
-+ host->hw = hw;
-+
-+ /* init mtd data structure */
-+ nand_chip = &host->nand_chip;
-+ nand_chip->priv = host; /* link the private data structures */
-+
-+ mtd = host->mtd = &nand_chip->mtd;
-+ mtd->priv = nand_chip;
-+ mtd->owner = THIS_MODULE;
-+ mtd->name = "MT7621-NAND";
-+
-+ hw->nand_ecc_mode = NAND_ECC_HW;
-+
-+ /* Set address of NAND IO lines */
-+ nand_chip->IO_ADDR_R = (void __iomem *)NFI_DATAR_REG32;
-+ nand_chip->IO_ADDR_W = (void __iomem *)NFI_DATAW_REG32;
-+ nand_chip->chip_delay = 20; /* 20us command delay time */
-+ nand_chip->ecc.mode = hw->nand_ecc_mode; /* enable ECC */
-+ nand_chip->ecc.strength = 1;
-+ nand_chip->read_byte = mtk_nand_read_byte;
-+ nand_chip->read_buf = mtk_nand_read_buf;
-+ nand_chip->write_buf = mtk_nand_write_buf;
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ nand_chip->verify_buf = mtk_nand_verify_buf;
-+#endif
-+ nand_chip->select_chip = mtk_nand_select_chip;
-+ nand_chip->dev_ready = mtk_nand_dev_ready;
-+ nand_chip->cmdfunc = mtk_nand_command_bp;
-+ nand_chip->ecc.read_page = mtk_nand_read_page_hwecc;
-+ nand_chip->ecc.write_page = mtk_nand_write_page_hwecc;
-+
-+ mtd_set_ooblayout(mtd, &oob_mtk_ops);
-+ nand_chip->ecc.size = hw->nand_ecc_size; //2048
-+ nand_chip->ecc.bytes = hw->nand_ecc_bytes; //32
-+
-+ // For BMT, we need to revise driver architecture
-+ nand_chip->write_page = mtk_nand_write_page;
-+ nand_chip->ecc.write_oob = mtk_nand_write_oob;
-+ nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
-+ nand_chip->read_page = mtk_nand_read_page;
-+ nand_chip->ecc.read_oob = mtk_nand_read_oob;
-+ nand_chip->block_bad = mtk_nand_block_bad;
-+ nand_chip->cmd_ctrl = mtk_nfc_cmd_ctrl;
-+
-+ //Qwert:Add for Uboot
-+ mtk_nand_init_hw(host);
-+ /* Select the device */
-+ nand_chip->select_chip(mtd, NFI_DEFAULT_CS);
-+
-+ /*
-+ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
-+ * after power-up
-+ */
-+ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+
-+ /* Send the command for reading device ID */
-+
-+ nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-+
-+ /* Read manufacturer and device IDs */
-+ manu_id = nand_chip->read_byte(mtd);
-+ dev_id = nand_chip->read_byte(mtd);
-+ id = dev_id | (manu_id << 8);
-+ ext_id1 = nand_chip->read_byte(mtd);
-+ ext_id2 = nand_chip->read_byte(mtd);
-+ ext_id3 = nand_chip->read_byte(mtd);
-+ ext_id = ext_id1 << 16 | ext_id2 << 8 | ext_id3;
-+ if (!get_device_info(id, ext_id, &devinfo)) {
-+ u32 chip_mode = RALINK_REG(RALINK_SYSCTL_BASE+0x010)&0x0F;
-+ MSG(INIT, "Not Support this Device! \r\n");
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+ MSG(INIT, "chip_mode=%08X\n",chip_mode);
-+
-+ /* apply bootstrap first */
-+ devinfo.addr_cycle = 5;
-+ devinfo.iowidth = 8;
-+
-+ switch (chip_mode) {
-+ case 10:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ case 11:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 1024;
-+ devinfo.blocksize = 256;
-+ break;
-+ case 12:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 224;
-+ devinfo.totalsize = 2048;
-+ devinfo.blocksize = 512;
-+ break;
-+ default:
-+ case 1:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 64;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ }
-+
-+ devinfo.timmingsetting = NFI_DEFAULT_ACCESS_TIMING;
-+ devinfo.devciename[0] = 'U';
-+ devinfo.advancedmode = 0;
-+ }
-+ mtd->writesize = devinfo.pagesize;
-+ mtd->erasesize = (devinfo.blocksize<<10);
-+ mtd->oobsize = devinfo.sparesize;
-+
-+ nand_chip->chipsize = (devinfo.totalsize<<20);
-+ nand_chip->page_shift = ffs(mtd->writesize) - 1;
-+ nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
-+ nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
-+ nand_chip->cmd_ctrl = mtk_nfc_cmd_ctrl;
-+
-+ if (devinfo.pagesize == 4096)
-+ layout = &nand_oob_128;
-+ else if (devinfo.pagesize == 2048)
-+ layout = &nand_oob_64;
-+ else if (devinfo.pagesize == 512)
-+ layout = &nand_oob_16;
-+
-+ layout->eccbytes = devinfo.sparesize-OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE);
-+ for (i = 0; i < layout->eccbytes; i++)
-+ layout->eccpos[i]=OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE)+i;
-+
-+ MSG(INIT, "Support this Device in MTK table! %x \r\n", id);
-+ hw->nfi_bus_width = devinfo.iowidth;
-+ DRV_WriteReg32(NFI_ACCCON_REG32, devinfo.timmingsetting);
-+
-+ /* 16-bit bus width */
-+ if (hw->nfi_bus_width == 16) {
-+ MSG(INIT, "%s : Set the 16-bit I/O settings!\n", MODULE_NAME);
-+ nand_chip->options |= NAND_BUSWIDTH_16;
-+ }
-+ mtd->oobsize = devinfo.sparesize;
-+ hw->nfi_cs_num = 1;
-+
-+ nand_chip->options |= NAND_USE_BOUNCE_BUFFER;
-+ nand_chip->buf_align = 16;
-+
-+ /* Scan to find existance of the device */
-+ if (nand_scan(mtd, hw->nfi_cs_num)) {
-+ MSG(INIT, "%s : nand_scan fail.\n", MODULE_NAME);
-+ err = -ENXIO;
-+ goto out;
-+ }
-+
-+ nand_chip->erase = mtk_nand_erase;
-+
-+ g_page_size = mtd->writesize;
-+ platform_set_drvdata(pdev, host);
-+ if (hw->nfi_bus_width == 16) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, PAGEFMT_DBYTE_EN);
-+ }
-+
-+ nand_chip->select_chip(mtd, 0);
-+#if defined(MTK_NAND_BMT)
-+ nand_chip->chipsize -= (BMT_POOL_SIZE) << nand_chip->phys_erase_shift;
-+#endif
-+ mtd->size = nand_chip->chipsize;
-+
-+ CFG_BLOCKSIZE = mtd->erasesize;
-+
-+#if defined(MTK_NAND_BMT)
-+ if (!g_bmt) {
-+ if (!(g_bmt = init_bmt(nand_chip, BMT_POOL_SIZE))) {
-+ MSG(INIT, "Error: init bmt failed\n");
-+ return 0;
-+ }
-+ }
-+#endif
-+
-+ nand_set_flash_node(nand_chip, pdev->dev.of_node);
-+ err = mtd_device_parse_register(mtd, probe_types, &ppdata,
-+ NULL, 0);
-+ if (!err) {
-+ MSG(INIT, "[mtk_nand] probe successfully!\n");
-+ nand_disable_clock();
-+ shift_on_bbt = 0;
-+ if (load_fact_bbt(mtd) == 0) {
-+ int i;
-+ for (i = 0; i < 0x100; i++)
-+ nand_chip->bbt[i] |= fact_bbt[i];
-+ }
-+
-+ return err;
-+ }
-+
-+out:
-+ MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
-+ nand_release(nand_chip);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(host);
-+ nand_disable_clock();
-+ return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+ struct mtk_nand_host *host = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = host->mtd;
-+ struct nand_chip *nand_chip = &host->nand_chip;
-+
-+ nand_release(nand_chip);
-+ kfree(host);
-+ nand_disable_clock();
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_nand_match[] = {
-+ { .compatible = "mtk,mt7621-nand" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+ .probe = mtk_nand_probe,
-+ .remove = mtk_nand_remove,
-+ .driver = {
-+ .name = "MT7621-NAND",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7621_nand_match,
-+ },
-+};
-+
-+static int __init
-+mtk_nand_init(void)
-+{
-+ printk("MediaTek Nand driver init, version %s\n", VERSION);
-+
-+ return platform_driver_register(&mtk_nand_driver);
-+}
-+
-+static void __exit
-+mtk_nand_exit(void)
-+{
-+ platform_driver_unregister(&mtk_nand_driver);
-+}
-+
-+module_init(mtk_nand_init);
-+module_exit(mtk_nand_exit);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand2.h
-@@ -0,0 +1,452 @@
-+#ifndef __MTK_NAND_H
-+#define __MTK_NAND_H
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+/*******************************************************************************
-+ * NFI Register Definition
-+ *******************************************************************************/
-+
-+#define NFI_CNFG_REG16 ((volatile P_U16)(NFI_BASE+0x0000))
-+#define NFI_PAGEFMT_REG16 ((volatile P_U16)(NFI_BASE+0x0004))
-+#define NFI_CON_REG16 ((volatile P_U16)(NFI_BASE+0x0008))
-+#define NFI_ACCCON_REG32 ((volatile P_U32)(NFI_BASE+0x000C))
-+#define NFI_INTR_EN_REG16 ((volatile P_U16)(NFI_BASE+0x0010))
-+#define NFI_INTR_REG16 ((volatile P_U16)(NFI_BASE+0x0014))
-+
-+#define NFI_CMD_REG16 ((volatile P_U16)(NFI_BASE+0x0020))
-+
-+#define NFI_ADDRNOB_REG16 ((volatile P_U16)(NFI_BASE+0x0030))
-+#define NFI_COLADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0034))
-+#define NFI_ROWADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0038))
-+
-+#define NFI_STRDATA_REG16 ((volatile P_U16)(NFI_BASE+0x0040))
-+
-+#define NFI_DATAW_REG32 ((volatile P_U32)(NFI_BASE+0x0050))
-+#define NFI_DATAR_REG32 ((volatile P_U32)(NFI_BASE+0x0054))
-+#define NFI_PIO_DIRDY_REG16 ((volatile P_U16)(NFI_BASE+0x0058))
-+
-+#define NFI_STA_REG32 ((volatile P_U32)(NFI_BASE+0x0060))
-+#define NFI_FIFOSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0064))
-+#define NFI_LOCKSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0068))
-+
-+#define NFI_ADDRCNTR_REG16 ((volatile P_U16)(NFI_BASE+0x0070))
-+
-+#define NFI_STRADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0080))
-+#define NFI_BYTELEN_REG16 ((volatile P_U16)(NFI_BASE+0x0084))
-+
-+#define NFI_CSEL_REG16 ((volatile P_U16)(NFI_BASE+0x0090))
-+#define NFI_IOCON_REG16 ((volatile P_U16)(NFI_BASE+0x0094))
-+
-+#define NFI_FDM0L_REG32 ((volatile P_U32)(NFI_BASE+0x00A0))
-+#define NFI_FDM0M_REG32 ((volatile P_U32)(NFI_BASE+0x00A4))
-+
-+#define NFI_LOCK_REG16 ((volatile P_U16)(NFI_BASE+0x0100))
-+#define NFI_LOCKCON_REG32 ((volatile P_U32)(NFI_BASE+0x0104))
-+#define NFI_LOCKANOB_REG16 ((volatile P_U16)(NFI_BASE+0x0108))
-+#define NFI_LOCK00ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0110))
-+#define NFI_LOCK00FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0114))
-+#define NFI_LOCK01ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0118))
-+#define NFI_LOCK01FMT_REG32 ((volatile P_U32)(NFI_BASE+0x011C))
-+#define NFI_LOCK02ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0120))
-+#define NFI_LOCK02FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0124))
-+#define NFI_LOCK03ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0128))
-+#define NFI_LOCK03FMT_REG32 ((volatile P_U32)(NFI_BASE+0x012C))
-+#define NFI_LOCK04ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0130))
-+#define NFI_LOCK04FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0134))
-+#define NFI_LOCK05ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0138))
-+#define NFI_LOCK05FMT_REG32 ((volatile P_U32)(NFI_BASE+0x013C))
-+#define NFI_LOCK06ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0140))
-+#define NFI_LOCK06FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0144))
-+#define NFI_LOCK07ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0148))
-+#define NFI_LOCK07FMT_REG32 ((volatile P_U32)(NFI_BASE+0x014C))
-+#define NFI_LOCK08ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0150))
-+#define NFI_LOCK08FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0154))
-+#define NFI_LOCK09ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0158))
-+#define NFI_LOCK09FMT_REG32 ((volatile P_U32)(NFI_BASE+0x015C))
-+#define NFI_LOCK10ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0160))
-+#define NFI_LOCK10FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0164))
-+#define NFI_LOCK11ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0168))
-+#define NFI_LOCK11FMT_REG32 ((volatile P_U32)(NFI_BASE+0x016C))
-+#define NFI_LOCK12ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0170))
-+#define NFI_LOCK12FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0174))
-+#define NFI_LOCK13ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0178))
-+#define NFI_LOCK13FMT_REG32 ((volatile P_U32)(NFI_BASE+0x017C))
-+#define NFI_LOCK14ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0180))
-+#define NFI_LOCK14FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0184))
-+#define NFI_LOCK15ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0188))
-+#define NFI_LOCK15FMT_REG32 ((volatile P_U32)(NFI_BASE+0x018C))
-+
-+#define NFI_FIFODATA0_REG32 ((volatile P_U32)(NFI_BASE+0x0190))
-+#define NFI_FIFODATA1_REG32 ((volatile P_U32)(NFI_BASE+0x0194))
-+#define NFI_FIFODATA2_REG32 ((volatile P_U32)(NFI_BASE+0x0198))
-+#define NFI_FIFODATA3_REG32 ((volatile P_U32)(NFI_BASE+0x019C))
-+#define NFI_MASTERSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0210))
-+
-+
-+/*******************************************************************************
-+ * NFI Register Field Definition
-+ *******************************************************************************/
-+
-+/* NFI_CNFG */
-+#define CNFG_AHB (0x0001)
-+#define CNFG_READ_EN (0x0002)
-+#define CNFG_DMA_BURST_EN (0x0004)
-+#define CNFG_BYTE_RW (0x0040)
-+#define CNFG_HW_ECC_EN (0x0100)
-+#define CNFG_AUTO_FMT_EN (0x0200)
-+#define CNFG_OP_IDLE (0x0000)
-+#define CNFG_OP_READ (0x1000)
-+#define CNFG_OP_SRD (0x2000)
-+#define CNFG_OP_PRGM (0x3000)
-+#define CNFG_OP_ERASE (0x4000)
-+#define CNFG_OP_RESET (0x5000)
-+#define CNFG_OP_CUST (0x6000)
-+#define CNFG_OP_MODE_MASK (0x7000)
-+#define CNFG_OP_MODE_SHIFT (12)
-+
-+/* NFI_PAGEFMT */
-+#define PAGEFMT_512 (0x0000)
-+#define PAGEFMT_2K (0x0001)
-+#define PAGEFMT_4K (0x0002)
-+
-+#define PAGEFMT_PAGE_MASK (0x0003)
-+
-+#define PAGEFMT_DBYTE_EN (0x0008)
-+
-+#define PAGEFMT_SPARE_16 (0x0000)
-+#define PAGEFMT_SPARE_26 (0x0001)
-+#define PAGEFMT_SPARE_27 (0x0002)
-+#define PAGEFMT_SPARE_28 (0x0003)
-+#define PAGEFMT_SPARE_MASK (0x0030)
-+#define PAGEFMT_SPARE_SHIFT (4)
-+
-+#define PAGEFMT_FDM_MASK (0x0F00)
-+#define PAGEFMT_FDM_SHIFT (8)
-+
-+#define PAGEFMT_FDM_ECC_MASK (0xF000)
-+#define PAGEFMT_FDM_ECC_SHIFT (12)
-+
-+/* NFI_CON */
-+#define CON_FIFO_FLUSH (0x0001)
-+#define CON_NFI_RST (0x0002)
-+#define CON_NFI_SRD (0x0010)
-+
-+#define CON_NFI_NOB_MASK (0x0060)
-+#define CON_NFI_NOB_SHIFT (5)
-+
-+#define CON_NFI_BRD (0x0100)
-+#define CON_NFI_BWR (0x0200)
-+
-+#define CON_NFI_SEC_MASK (0xF000)
-+#define CON_NFI_SEC_SHIFT (12)
-+
-+/* NFI_ACCCON */
-+#define ACCCON_SETTING ()
-+
-+/* NFI_INTR_EN */
-+#define INTR_RD_DONE_EN (0x0001)
-+#define INTR_WR_DONE_EN (0x0002)
-+#define INTR_RST_DONE_EN (0x0004)
-+#define INTR_ERASE_DONE_EN (0x0008)
-+#define INTR_BSY_RTN_EN (0x0010)
-+#define INTR_ACC_LOCK_EN (0x0020)
-+#define INTR_AHB_DONE_EN (0x0040)
-+#define INTR_ALL_INTR_DE (0x0000)
-+#define INTR_ALL_INTR_EN (0x007F)
-+
-+/* NFI_INTR */
-+#define INTR_RD_DONE (0x0001)
-+#define INTR_WR_DONE (0x0002)
-+#define INTR_RST_DONE (0x0004)
-+#define INTR_ERASE_DONE (0x0008)
-+#define INTR_BSY_RTN (0x0010)
-+#define INTR_ACC_LOCK (0x0020)
-+#define INTR_AHB_DONE (0x0040)
-+
-+/* NFI_ADDRNOB */
-+#define ADDR_COL_NOB_MASK (0x0003)
-+#define ADDR_COL_NOB_SHIFT (0)
-+#define ADDR_ROW_NOB_MASK (0x0030)
-+#define ADDR_ROW_NOB_SHIFT (4)
-+
-+/* NFI_STA */
-+#define STA_READ_EMPTY (0x00001000)
-+#define STA_ACC_LOCK (0x00000010)
-+#define STA_CMD_STATE (0x00000001)
-+#define STA_ADDR_STATE (0x00000002)
-+#define STA_DATAR_STATE (0x00000004)
-+#define STA_DATAW_STATE (0x00000008)
-+
-+#define STA_NAND_FSM_MASK (0x1F000000)
-+#define STA_NAND_BUSY (0x00000100)
-+#define STA_NAND_BUSY_RETURN (0x00000200)
-+#define STA_NFI_FSM_MASK (0x000F0000)
-+#define STA_NFI_OP_MASK (0x0000000F)
-+
-+/* NFI_FIFOSTA */
-+#define FIFO_RD_EMPTY (0x0040)
-+#define FIFO_RD_FULL (0x0080)
-+#define FIFO_WR_FULL (0x8000)
-+#define FIFO_WR_EMPTY (0x4000)
-+#define FIFO_RD_REMAIN(x) (0x1F&(x))
-+#define FIFO_WR_REMAIN(x) ((0x1F00&(x))>>8)
-+
-+/* NFI_ADDRCNTR */
-+#define ADDRCNTR_CNTR(x) ((0xF000&(x))>>12)
-+#define ADDRCNTR_OFFSET(x) (0x03FF&(x))
-+
-+/* NFI_LOCK */
-+#define NFI_LOCK_ON (0x0001)
-+
-+/* NFI_LOCKANOB */
-+#define PROG_RADD_NOB_MASK (0x7000)
-+#define PROG_RADD_NOB_SHIFT (12)
-+#define PROG_CADD_NOB_MASK (0x0300)
-+#define PROG_CADD_NOB_SHIFT (8)
-+#define ERASE_RADD_NOB_MASK (0x0070)
-+#define ERASE_RADD_NOB_SHIFT (4)
-+#define ERASE_CADD_NOB_MASK (0x0007)
-+#define ERASE_CADD_NOB_SHIFT (0)
-+
-+/*******************************************************************************
-+ * ECC Register Definition
-+ *******************************************************************************/
-+
-+#define ECC_ENCCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0000))
-+#define ECC_ENCCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0004))
-+#define ECC_ENCDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0008))
-+#define ECC_ENCIDLE_REG32 ((volatile P_U32)(NFIECC_BASE+0x000C))
-+#define ECC_ENCPAR0_REG32 ((volatile P_U32)(NFIECC_BASE+0x0010))
-+#define ECC_ENCPAR1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0014))
-+#define ECC_ENCPAR2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0018))
-+#define ECC_ENCPAR3_REG32 ((volatile P_U32)(NFIECC_BASE+0x001C))
-+#define ECC_ENCPAR4_REG32 ((volatile P_U32)(NFIECC_BASE+0x0020))
-+#define ECC_ENCSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0024))
-+#define ECC_ENCIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0028))
-+#define ECC_ENCIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x002C))
-+
-+#define ECC_DECCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0100))
-+#define ECC_DECCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0104))
-+#define ECC_DECDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0108))
-+#define ECC_DECIDLE_REG16 ((volatile P_U16)(NFIECC_BASE+0x010C))
-+#define ECC_DECFER_REG16 ((volatile P_U16)(NFIECC_BASE+0x0110))
-+#define ECC_DECENUM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0114))
-+#define ECC_DECDONE_REG16 ((volatile P_U16)(NFIECC_BASE+0x0118))
-+#define ECC_DECEL0_REG32 ((volatile P_U32)(NFIECC_BASE+0x011C))
-+#define ECC_DECEL1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0120))
-+#define ECC_DECEL2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0124))
-+#define ECC_DECEL3_REG32 ((volatile P_U32)(NFIECC_BASE+0x0128))
-+#define ECC_DECEL4_REG32 ((volatile P_U32)(NFIECC_BASE+0x012C))
-+#define ECC_DECEL5_REG32 ((volatile P_U32)(NFIECC_BASE+0x0130))
-+#define ECC_DECIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0134))
-+#define ECC_DECIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x0138))
-+#define ECC_FDMADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x013C))
-+#define ECC_DECFSM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0140))
-+#define ECC_SYNSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0144))
-+#define ECC_DECNFIDI_REG32 ((volatile P_U32)(NFIECC_BASE+0x0148))
-+#define ECC_SYN0_REG32 ((volatile P_U32)(NFIECC_BASE+0x014C))
-+
-+/*******************************************************************************
-+ * ECC register definition
-+ *******************************************************************************/
-+/* ECC_ENCON */
-+#define ENC_EN (0x0001)
-+#define ENC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define ECC_CNFG_ECC4 (0x0000)
-+#define ECC_CNFG_ECC6 (0x0001)
-+#define ECC_CNFG_ECC8 (0x0002)
-+#define ECC_CNFG_ECC10 (0x0003)
-+#define ECC_CNFG_ECC12 (0x0004)
-+#define ECC_CNFG_ECC_MASK (0x00000007)
-+
-+#define ENC_CNFG_NFI (0x0010)
-+#define ENC_CNFG_MODE_MASK (0x0010)
-+
-+#define ENC_CNFG_META6 (0x10300000)
-+#define ENC_CNFG_META8 (0x10400000)
-+
-+#define ENC_CNFG_MSG_MASK (0x1FFF0000)
-+#define ENC_CNFG_MSG_SHIFT (0x10)
-+
-+/* ECC_ENCIDLE */
-+#define ENC_IDLE (0x0001)
-+
-+/* ECC_ENCSTA */
-+#define STA_FSM (0x001F)
-+#define STA_COUNT_PS (0xFF10)
-+#define STA_COUNT_MS (0x3FFF0000)
-+
-+/* ECC_ENCIRQEN */
-+#define ENC_IRQEN (0x0001)
-+
-+/* ECC_ENCIRQSTA */
-+#define ENC_IRQSTA (0x0001)
-+
-+/* ECC_DECCON */
-+#define DEC_EN (0x0001)
-+#define DEC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define DEC_CNFG_ECC4 (0x0000)
-+//#define DEC_CNFG_ECC6 (0x0001)
-+//#define DEC_CNFG_ECC12 (0x0002)
-+#define DEC_CNFG_NFI (0x0010)
-+//#define DEC_CNFG_META6 (0x10300000)
-+//#define DEC_CNFG_META8 (0x10400000)
-+
-+#define DEC_CNFG_FER (0x01000)
-+#define DEC_CNFG_EL (0x02000)
-+#define DEC_CNFG_CORRECT (0x03000)
-+#define DEC_CNFG_TYPE_MASK (0x03000)
-+
-+#define DEC_CNFG_EMPTY_EN (0x80000000)
-+
-+#define DEC_CNFG_CODE_MASK (0x1FFF0000)
-+#define DEC_CNFG_CODE_SHIFT (0x10)
-+
-+/* ECC_DECIDLE */
-+#define DEC_IDLE (0x0001)
-+
-+/* ECC_DECFER */
-+#define DEC_FER0 (0x0001)
-+#define DEC_FER1 (0x0002)
-+#define DEC_FER2 (0x0004)
-+#define DEC_FER3 (0x0008)
-+#define DEC_FER4 (0x0010)
-+#define DEC_FER5 (0x0020)
-+#define DEC_FER6 (0x0040)
-+#define DEC_FER7 (0x0080)
-+
-+/* ECC_DECENUM */
-+#define ERR_NUM0 (0x0000000F)
-+#define ERR_NUM1 (0x000000F0)
-+#define ERR_NUM2 (0x00000F00)
-+#define ERR_NUM3 (0x0000F000)
-+#define ERR_NUM4 (0x000F0000)
-+#define ERR_NUM5 (0x00F00000)
-+#define ERR_NUM6 (0x0F000000)
-+#define ERR_NUM7 (0xF0000000)
-+
-+/* ECC_DECDONE */
-+#define DEC_DONE0 (0x0001)
-+#define DEC_DONE1 (0x0002)
-+#define DEC_DONE2 (0x0004)
-+#define DEC_DONE3 (0x0008)
-+#define DEC_DONE4 (0x0010)
-+#define DEC_DONE5 (0x0020)
-+#define DEC_DONE6 (0x0040)
-+#define DEC_DONE7 (0x0080)
-+
-+/* ECC_DECIRQEN */
-+#define DEC_IRQEN (0x0001)
-+
-+/* ECC_DECIRQSTA */
-+#define DEC_IRQSTA (0x0001)
-+
-+#define CHIPVER_ECO_1 (0x8a00)
-+#define CHIPVER_ECO_2 (0x8a01)
-+
-+//#define NAND_PFM
-+
-+/*******************************************************************************
-+ * Data Structure Definition
-+ *******************************************************************************/
-+struct mtk_nand_host
-+{
-+ struct nand_chip nand_chip;
-+ struct mtd_info *mtd;
-+ struct mtk_nand_host_hw *hw;
-+};
-+
-+struct NAND_CMD
-+{
-+ u32 u4ColAddr;
-+ u32 u4RowAddr;
-+ u32 u4OOBRowAddr;
-+ u8 au1OOB[288];
-+ u8* pDataBuf;
-+#ifdef NAND_PFM
-+ u32 pureReadOOB;
-+ u32 pureReadOOBNum;
-+#endif
-+};
-+
-+/*
-+ * ECC layout control structure. Exported to userspace for
-+ * diagnosis and to allow creation of raw images
-+struct nand_ecclayout {
-+ uint32_t eccbytes;
-+ uint32_t eccpos[64];
-+ uint32_t oobavail;
-+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
-+};
-+*/
-+#define __DEBUG_NAND 1 /* Debug information on/off */
-+
-+/* Debug message event */
-+#define DBG_EVT_NONE 0x00000000 /* No event */
-+#define DBG_EVT_INIT 0x00000001 /* Initial related event */
-+#define DBG_EVT_VERIFY 0x00000002 /* Verify buffer related event */
-+#define DBG_EVT_PERFORMANCE 0x00000004 /* Performance related event */
-+#define DBG_EVT_READ 0x00000008 /* Read related event */
-+#define DBG_EVT_WRITE 0x00000010 /* Write related event */
-+#define DBG_EVT_ERASE 0x00000020 /* Erase related event */
-+#define DBG_EVT_BADBLOCK 0x00000040 /* Badblock related event */
-+#define DBG_EVT_POWERCTL 0x00000080 /* Suspend/Resume related event */
-+
-+#define DBG_EVT_ALL 0xffffffff
-+
-+#define DBG_EVT_MASK (DBG_EVT_INIT)
-+
-+#if __DEBUG_NAND
-+#define MSG(evt, fmt, args...) \
-+do { \
-+ if ((DBG_EVT_##evt) & DBG_EVT_MASK) { \
-+ printk(fmt, ##args); \
-+ } \
-+} while(0)
-+
-+#define MSG_FUNC_ENTRY(f) MSG(FUC, "<FUN_ENT>: %s\n", __FUNCTION__)
-+#else
-+#define MSG(evt, fmt, args...) do{}while(0)
-+#define MSG_FUNC_ENTRY(f) do{}while(0)
-+#endif
-+
-+#define RAMDOM_READ 1<<0
-+#define CACHE_READ 1<<1
-+
-+typedef struct
-+{
-+ u16 id; //deviceid+menuid
-+ u32 ext_id;
-+ u8 addr_cycle;
-+ u8 iowidth;
-+ u16 totalsize;
-+ u16 blocksize;
-+ u16 pagesize;
-+ u16 sparesize;
-+ u32 timmingsetting;
-+ char devciename[14];
-+ u32 advancedmode; //
-+}flashdev_info,*pflashdev_info;
-+
-+/* NAND driver */
-+#if 0
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern u32 CFG_BLOCKSIZE;
-+#endif
-+#endif
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -48,7 +48,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-
--static int nand_get_device(struct mtd_info *mtd, int new_state);
-+int nand_get_device(struct mtd_info *mtd, int new_state);
-
- static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
- struct mtd_oob_ops *ops);
-@@ -240,7 +240,7 @@ static int check_offs_len(struct mtd_inf
- *
- * Release chip lock and wake up anyone waiting on the device.
- */
--static void nand_release_device(struct mtd_info *mtd)
-+void nand_release_device(struct mtd_info *mtd)
- {
- struct nand_chip *chip = mtd_to_nand(mtd);
-
-@@ -968,7 +968,7 @@ static void panic_nand_get_device(struct
- *
- * Get the device and lock it for exclusive access
- */
--static int
-+int
- nand_get_device(struct mtd_info *mtd, int new_state)
- {
- struct nand_chip *chip = mtd_to_nand(mtd);
---- /dev/null
-+++ b/drivers/mtd/nand/nand_def.h
-@@ -0,0 +1,123 @@
-+#ifndef __NAND_DEF_H__
-+#define __NAND_DEF_H__
-+
-+#define VERSION "v2.1 Fix AHB virt2phys error"
-+#define MODULE_NAME "# MTK NAND #"
-+#define PROCNAME "driver/nand"
-+
-+#undef TESTTIME
-+//#define __UBOOT_NAND__ 1
-+#define __KERNEL_NAND__ 1
-+//#define __PRELOADER_NAND__ 1
-+//#define PMT 1
-+//#define _MTK_NAND_DUMMY_DRIVER
-+//#define CONFIG_BADBLOCK_CHECK 1
-+//#ifdef CONFIG_BADBLOCK_CHECK
-+//#define MTK_NAND_BMT 1
-+//#endif
-+#define ECC_ENABLE 1
-+#define MANUAL_CORRECT 1
-+//#define __INTERNAL_USE_AHB_MODE__ (0)
-+#define SKIP_BAD_BLOCK
-+#define FACT_BBT
-+
-+#ifndef NAND_OTP_SUPPORT
-+#define NAND_OTP_SUPPORT 0
-+#endif
-+
-+/*******************************************************************************
-+ * Macro definition
-+ *******************************************************************************/
-+//#define NFI_SET_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) | (value)))
-+//#define NFI_SET_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) | (value)))
-+//#define NFI_CLN_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) & (~(value))))
-+//#define NFI_CLN_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) & (~(value))))
-+
-+#if defined (__KERNEL_NAND__)
-+#define NFI_SET_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) | (value));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_SET_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) | (value));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) & (~(value)));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) & (~(value)));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+#endif
-+
-+#define NFI_WAIT_STATE_DONE(state) do{;}while (__raw_readl(NFI_STA_REG32) & state)
-+#define NFI_WAIT_TO_READY() do{;}while (!(__raw_readl(NFI_STA_REG32) & STA_BUSY2READY))
-+
-+
-+#define NAND_SECTOR_SIZE (512)
-+#define OOB_PER_SECTOR (16)
-+#define OOB_AVAI_PER_SECTOR (8)
-+
-+#ifndef PART_SIZE_BMTPOOL
-+#define BMT_POOL_SIZE (80)
-+#else
-+#define BMT_POOL_SIZE (PART_SIZE_BMTPOOL)
-+#endif
-+
-+#define PMT_POOL_SIZE (2)
-+
-+#define TIMEOUT_1 0x1fff
-+#define TIMEOUT_2 0x8ff
-+#define TIMEOUT_3 0xffff
-+#define TIMEOUT_4 0xffff//5000 //PIO
-+
-+
-+/* temporarity definiation */
-+#if !defined (__KERNEL_NAND__)
-+#define KERN_INFO
-+#define KERN_WARNING
-+#define KERN_ERR
-+#define PAGE_SIZE (4096)
-+#endif
-+#define AddStorageTrace //AddStorageTrace
-+#define STORAGE_LOGGER_MSG_NAND 0
-+#define NFI_BASE RALINK_NAND_CTRL_BASE
-+#define NFIECC_BASE RALINK_NANDECC_CTRL_BASE
-+
-+#ifdef __INTERNAL_USE_AHB_MODE__
-+#define MT65xx_POLARITY_LOW 0
-+#define MT65XX_PDN_PERI_NFI 0
-+#define MT65xx_EDGE_SENSITIVE 0
-+#define MT6575_NFI_IRQ_ID (58)
-+#endif
-+
-+#if defined (__KERNEL_NAND__)
-+#define RALINK_REG(x) (*((volatile u32 *)(x)))
-+#define __virt_to_phys(x) virt_to_phys((volatile void*)x)
-+#else
-+#define CONFIG_MTD_NAND_VERIFY_WRITE (1)
-+#define printk printf
-+#define ra_dbg printf
-+#define BUG() //BUG()
-+#define BUG_ON(x) //BUG_ON()
-+#define NUM_PARTITIONS 1
-+#endif
-+
-+#define NFI_DEFAULT_ACCESS_TIMING (0x30C77fff) //(0x44333)
-+
-+//uboot only support 1 cs
-+#define NFI_CS_NUM (1)
-+#define NFI_DEFAULT_CS (0)
-+
-+#include "mt6575_typedefs.h"
-+
-+#endif /* __NAND_DEF_H__ */
---- /dev/null
-+++ b/drivers/mtd/nand/nand_device_list.h
-@@ -0,0 +1,60 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __NAND_DEVICE_LIST_H__
-+#define __NAND_DEVICE_LIST_H__
-+
-+static const flashdev_info gen_FlashTable[]={
-+ {0x20BC, 0x105554, 5, 16, 512, 128, 2048, 64, 0x1123, "EHD013151MA_5", 0},
-+ {0xECBC, 0x005554, 5, 16, 512, 128, 2048, 64, 0x1123, "K524G2GACB_A0", 0},
-+ {0x2CBC, 0x905556, 5, 16, 512, 128, 2048, 64, 0x21044333, "MT29C4G96MAZA", 0},
-+ {0x2CDA, 0x909506, 5, 8, 256, 128, 2048, 64, 0x30C77fff, "MT29F2G08ABAE", 0},
-+ {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
-+ {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
-+ {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
-+ {0xC8D1, 0x809540, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81MA", 0},
-+ {0xC8DA, 0x909544, 5, 8, 256, 128, 2048, 64, 0x30C77fff, "F59L2G81A", 0},
-+ {0xC8DC, 0x909554, 5, 8, 512, 128, 2048, 64, 0x30C77fff, "F59L4G81A", 0},
-+ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
-+ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
-+ {0xC2F1, 0x809502, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G18AC", 0},
-+ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
-+ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0},
-+ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0},
-+ {0x0000, 0x000000, 0, 0, 0, 0, 0, 0, 0, "xxxxxxxxxx", 0},
-+};
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/partition.h
-@@ -0,0 +1,115 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/rawnand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define RECONFIG_PARTITION_SIZE 1
-+
-+#define MTD_BOOT_PART_SIZE 0x80000
-+#define MTD_CONFIG_PART_SIZE 0x20000
-+#define MTD_FACTORY_PART_SIZE 0x20000
-+
-+extern unsigned int CFG_BLOCKSIZE;
-+#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
-+
-+/*=======================================================================*/
-+/* NAND PARTITION Mapping */
-+/*=======================================================================*/
-+//#ifdef CONFIG_MTD_PARTITIONS
-+static struct mtd_partition g_pasStatic_Partition[] = {
-+ {
-+ name: "ALL",
-+ size: MTDPART_SIZ_FULL,
-+ offset: 0,
-+ },
-+ /* Put your own partition definitions here */
-+ {
-+ name: "Bootloader",
-+ size: MTD_BOOT_PART_SIZE,
-+ offset: 0,
-+ }, {
-+ name: "Config",
-+ size: MTD_CONFIG_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+ }, {
-+ name: "Factory",
-+ size: MTD_FACTORY_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "Kernel",
-+ size: MTD_KERN_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+ }, {
-+ name: "RootFS",
-+ size: MTD_ROOTFS_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
-+ }, {
-+ name: "Kernel_RootFS",
-+ size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,
-+ offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,
-+#endif
-+#else //CONFIG_RT2880_ROOTFS_IN_RAM
-+ }, {
-+ name: "Kernel",
-+ size: 0x10000,
-+ offset: MTDPART_OFS_APPEND,
-+#endif
-+#ifdef CONFIG_DUAL_IMAGE
-+ }, {
-+ name: "Kernel2",
-+ size: MTD_KERN2_PART_SIZE,
-+ offset: MTD_KERN2_PART_OFFSET,
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "RootFS2",
-+ size: MTD_ROOTFS2_PART_SIZE,
-+ offset: MTD_ROOTFS2_PART_OFFSET,
-+#endif
-+#endif
-+ }
-+
-+};
-+
-+#define NUM_PARTITIONS ARRAY_SIZE(g_pasStatic_Partition)
-+extern int part_num; // = NUM_PARTITIONS;
-+//#endif
-+#undef RECONFIG_PARTITION_SIZE
-+
diff --git a/target/linux/ramips/patches-4.14/0040-nand-hack.patch b/target/linux/ramips/patches-4.14/0040-nand-hack.patch
deleted file mode 100644
index b708b3b9cb..0000000000
--- a/target/linux/ramips/patches-4.14/0040-nand-hack.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1908,6 +1908,9 @@ static int nand_do_read_ops(struct mtd_i
- __func__, buf);
-
- read_retry:
-+#ifdef CONFIG_MTK_MTD_NAND
-+ ret = chip->read_page(mtd, chip, bufpoi, page);
-+#else
- if (nand_standard_page_accessors(&chip->ecc))
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-
-@@ -1927,6 +1930,7 @@ read_retry:
- else
- ret = chip->ecc.read_page(mtd, chip, bufpoi,
- oob_required, page);
-+#endif
- if (ret < 0) {
- if (use_bufpoi)
- /* Invalidate page cache */
---- a/include/linux/mtd/rawnand.h
-+++ b/include/linux/mtd/rawnand.h
-@@ -895,6 +895,9 @@ struct nand_chip {
- int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
- const struct nand_data_interface *conf);
-
-+#ifdef CONFIG_MTK_MTD_NAND
-+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, u8 *buf, int page);
-+#endif /* CONFIG_MTK_MTD_NAND */
-
- int chip_delay;
- unsigned int options;
diff --git a/target/linux/ramips/patches-4.14/0041-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-4.14/0041-DT-Add-documentation-for-spi-rt2880.patch
deleted file mode 100644
index e2643e3f25..0000000000
--- a/target/linux/ramips/patches-4.14/0041-DT-Add-documentation-for-spi-rt2880.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
-
-Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
- 1 file changed, 28 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-@@ -0,0 +1,28 @@
-+Ralink SoC RT2880 SPI master controller.
-+
-+This SPI controller is found on most wireless SoCs made by ralink.
-+
-+Required properties:
-+- compatible : "ralink,rt2880-spi"
-+- reg : The register base for the controller.
-+- #address-cells : <1>, as required by generic SPI binding.
-+- #size-cells : <0>, also as required by generic SPI binding.
-+
-+Child nodes as per the generic SPI binding.
-+
-+Example:
-+
-+ spi@b00 {
-+ compatible = "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ m25p80@0 {
-+ compatible = "m25p80";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ };
-+ };
-+
diff --git a/target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
deleted file mode 100644
index 1dd9f40c39..0000000000
--- a/target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:15:12 +0100
-Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
-
-Add the driver needed to make SPI work on Ralink SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 537 insertions(+)
- create mode 100644 drivers/spi/spi-rt2880.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -563,6 +563,12 @@ config SPI_QUP
- This driver can also be built as a module. If so, the module
- will be called spi_qup.
-
-+config SPI_RT2880
-+ tristate "Ralink RT288x SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
-+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
---- /dev/null
-+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,530 @@
-+/*
-+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ * Author: Shadi Ammouri <shadi@marvell.com>
-+ * Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#define DRIVER_NAME "spi-rt2880"
-+
-+#define RAMIPS_SPI_STAT 0x00
-+#define RAMIPS_SPI_CFG 0x10
-+#define RAMIPS_SPI_CTL 0x14
-+#define RAMIPS_SPI_DATA 0x20
-+#define RAMIPS_SPI_ADDR 0x24
-+#define RAMIPS_SPI_BS 0x28
-+#define RAMIPS_SPI_USER 0x2C
-+#define RAMIPS_SPI_TXFIFO 0x30
-+#define RAMIPS_SPI_RXFIFO 0x34
-+#define RAMIPS_SPI_FIFO_STAT 0x38
-+#define RAMIPS_SPI_MODE 0x3C
-+#define RAMIPS_SPI_DEV_OFFSET 0x40
-+#define RAMIPS_SPI_DMA 0x80
-+#define RAMIPS_SPI_DMASTAT 0x84
-+#define RAMIPS_SPI_ARBITER 0xF0
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+/* SPICFG register bit field */
-+#define SPICFG_ADDRMODE BIT(12)
-+#define SPICFG_RXENVDIS BIT(11)
-+#define SPICFG_RXCAP BIT(10)
-+#define SPICFG_SPIENMODE BIT(9)
-+#define SPICFG_MSBFIRST BIT(8)
-+#define SPICFG_SPICLKPOL BIT(6)
-+#define SPICFG_RXCLKEDGE_FALLING BIT(5)
-+#define SPICFG_TXCLKEDGE_FALLING BIT(4)
-+#define SPICFG_HIZSPI BIT(3)
-+#define SPICFG_SPICLK_PRESCALE_MASK 0x7
-+#define SPICFG_SPICLK_DIV2 0
-+#define SPICFG_SPICLK_DIV4 1
-+#define SPICFG_SPICLK_DIV8 2
-+#define SPICFG_SPICLK_DIV16 3
-+#define SPICFG_SPICLK_DIV32 4
-+#define SPICFG_SPICLK_DIV64 5
-+#define SPICFG_SPICLK_DIV128 6
-+#define SPICFG_SPICLK_DISABLE 7
-+
-+/* SPICTL register bit field */
-+#define SPICTL_START BIT(4)
-+#define SPICTL_HIZSDO BIT(3)
-+#define SPICTL_STARTWR BIT(2)
-+#define SPICTL_STARTRD BIT(1)
-+#define SPICTL_SPIENA BIT(0)
-+
-+/* SPIUSER register bit field */
-+#define SPIUSER_USERMODE BIT(21)
-+#define SPIUSER_INSTR_PHASE BIT(20)
-+#define SPIUSER_ADDR_PHASE_MASK 0x7
-+#define SPIUSER_ADDR_PHASE_OFFSET 17
-+#define SPIUSER_MODE_PHASE BIT(16)
-+#define SPIUSER_DUMMY_PHASE_MASK 0x3
-+#define SPIUSER_DUMMY_PHASE_OFFSET 14
-+#define SPIUSER_DATA_PHASE_MASK 0x3
-+#define SPIUSER_DATA_PHASE_OFFSET 12
-+#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_ADDR_TYPE_OFFSET 9
-+#define SPIUSER_MODE_TYPE_OFFSET 6
-+#define SPIUSER_DUMMY_TYPE_OFFSET 3
-+#define SPIUSER_DATA_TYPE_OFFSET 0
-+#define SPIUSER_TRANSFER_MASK 0x7
-+#define SPIUSER_TRANSFER_SINGLE BIT(0)
-+#define SPIUSER_TRANSFER_DUAL BIT(1)
-+#define SPIUSER_TRANSFER_QUAD BIT(2)
-+
-+#define SPIUSER_TRANSFER_TYPE(type) ( \
-+ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
-+ (type << SPIUSER_MODE_TYPE_OFFSET) | \
-+ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
-+ (type << SPIUSER_DATA_TYPE_OFFSET) \
-+)
-+
-+/* SPIFIFOSTAT register bit field */
-+#define SPIFIFOSTAT_TXEMPTY BIT(19)
-+#define SPIFIFOSTAT_RXEMPTY BIT(18)
-+#define SPIFIFOSTAT_TXFULL BIT(17)
-+#define SPIFIFOSTAT_RXFULL BIT(16)
-+#define SPIFIFOSTAT_FIFO_MASK 0xff
-+#define SPIFIFOSTAT_TX_OFFSET 8
-+#define SPIFIFOSTAT_RX_OFFSET 0
-+
-+#define SPI_FIFO_DEPTH 16
-+
-+/* SPIMODE register bit field */
-+#define SPIMODE_MODE_OFFSET 24
-+#define SPIMODE_DUMMY_OFFSET 0
-+
-+/* SPIARB register bit field */
-+#define SPICTL_ARB_EN BIT(31)
-+#define SPICTL_CSCTL1 BIT(16)
-+#define SPI1_POR BIT(1)
-+#define SPI0_POR BIT(0)
-+
-+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
-+ SPI_CS_HIGH)
-+
-+static atomic_t hw_reset_count = ATOMIC_INIT(0);
-+
-+struct rt2880_spi {
-+ struct spi_master *master;
-+ void __iomem *base;
-+ u32 speed;
-+ u16 wait_loops;
-+ u16 mode;
-+ struct clk *clk;
-+};
-+
-+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
-+ const u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) | mask), addr);
-+}
-+
-+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) & ~mask), addr);
-+}
-+
-+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ u32 rate;
-+ u32 prescale;
-+
-+ /*
-+ * the supported rates are: 2, 4, 8, ... 128
-+ * round up as we look for equal or less speed
-+ */
-+ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
-+ rate = roundup_pow_of_two(rate);
-+
-+ /* Convert the rate to SPI clock divisor value. */
-+ prescale = ilog2(rate / 2);
-+
-+ /* some tolerance. double and add 100 */
-+ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
-+ (clk_get_rate(rs->clk) / rate);
-+ rs->wait_loops = (rs->wait_loops << 1) + 100;
-+ rs->speed = speed;
-+
-+ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
-+ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
-+ rs->wait_loops);
-+
-+ return prescale;
-+}
-+
-+static u32 get_arbiter_offset(struct spi_master *master)
-+{
-+ u32 offset;
-+
-+ offset = RAMIPS_SPI_ARBITER;
-+ if (master->bus_num == 1)
-+ offset -= RAMIPS_SPI_DEV_OFFSET;
-+
-+ return offset;
-+}
-+
-+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+
-+ if (enable)
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ else
-+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+}
-+
-+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
-+{
-+ int loop = rs->wait_loops * len;
-+
-+ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
-+ cpu_relax();
-+
-+ if (loop)
-+ return 0;
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void rt2880_dump_reg(struct spi_master *master)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+
-+ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
-+ "data: %08x, arb: %08x\n",
-+ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
-+ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
-+ rt2880_spi_read(rs, get_arbiter_offset(master)));
-+}
-+
-+static int rt2880_spi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi, struct spi_transfer *xfer)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ unsigned len;
-+ const u8 *tx = xfer->tx_buf;
-+ u8 *rx = xfer->rx_buf;
-+ int err = 0;
-+
-+ /* change clock speed */
-+ if (unlikely(rs->speed != xfer->speed_hz)) {
-+ u32 reg;
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
-+ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+ }
-+
-+ if (tx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ }
-+ }
-+
-+ if (rx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+ }
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+/* copy from spi.c */
-+static void spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ if (spi->mode & SPI_CS_HIGH)
-+ enable = !enable;
-+
-+ if (spi->cs_gpio >= 0)
-+ gpio_set_value(spi->cs_gpio, !enable);
-+ else if (spi->master->set_cs)
-+ spi->master->set_cs(spi, !enable);
-+}
-+
-+static int rt2880_spi_setup(struct spi_device *spi)
-+{
-+ struct spi_master *master = spi->master;
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ u32 reg, old_reg, arbit_off;
-+
-+ if ((spi->max_speed_hz > master->max_speed_hz) ||
-+ (spi->max_speed_hz < master->min_speed_hz)) {
-+ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ if (!(master->bits_per_word_mask &
-+ BIT(spi->bits_per_word - 1))) {
-+ dev_err(&spi->dev, "invalide bits_per_word %d\n",
-+ spi->bits_per_word);
-+ return -EINVAL;
-+ }
-+
-+ /* the hardware seems can't work on mode0 force it to mode3 */
-+ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
-+ dev_warn(&spi->dev, "force spi mode3\n");
-+ spi->mode |= SPI_MODE_3;
-+ }
-+
-+ /* chip polarity */
-+ arbit_off = get_arbiter_offset(master);
-+ reg = old_reg = rt2880_spi_read(rs, arbit_off);
-+ if (spi->mode & SPI_CS_HIGH) {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg |= SPI1_POR;
-+ break;
-+ default:
-+ reg |= SPI0_POR;
-+ break;
-+ }
-+ } else {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg &= ~SPI1_POR;
-+ break;
-+ default:
-+ reg &= ~SPI0_POR;
-+ break;
-+ }
-+ }
-+
-+ /* enable spi1 */
-+ if (master->bus_num == 1)
-+ reg |= SPICTL_ARB_EN;
-+
-+ if (reg != old_reg)
-+ rt2880_spi_write(rs, arbit_off, reg);
-+
-+ /* deselected the spi device */
-+ spi_set_cs(spi, false);
-+
-+ rt2880_dump_reg(master);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_prepare_message(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = msg->spi;
-+ u32 reg;
-+
-+ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
-+ return 0;
-+
-+#if 0
-+ /* set spido to tri-state */
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
-+#endif
-+
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+
-+ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
-+ SPICFG_RXCLKEDGE_FALLING |
-+ SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_PRESCALE_MASK);
-+
-+ /* MSB */
-+ if (!(spi->mode & SPI_LSB_FIRST))
-+ reg |= SPICFG_MSBFIRST;
-+
-+ /* spi mode */
-+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+ case SPI_MODE_0:
-+ reg |= SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_1:
-+ reg |= SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_2:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_3:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ }
-+ rs->mode = spi->mode;
-+
-+#if 0
-+ /* set spiclk and spiena to tri-state */
-+ reg |= SPICFG_HIZSPI;
-+#endif
-+
-+ /* clock divide */
-+ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+ void __iomem *base;
-+ struct resource *r;
-+ struct clk *clk;
-+ int ret;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ ret = clk_prepare_enable(clk);
-+ if (ret)
-+ goto err_clk;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (master == NULL) {
-+ dev_dbg(&pdev->dev, "master allocation failed\n");
-+ ret = -ENOMEM;
-+ goto err_clk;
-+ }
-+
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->mode_bits = RT2880_SPI_MODE_BITS;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->min_speed_hz = clk_get_rate(clk) / 128;
-+ master->max_speed_hz = clk_get_rate(clk) / 2;
-+ master->flags = SPI_MASTER_HALF_DUPLEX;
-+ master->setup = rt2880_spi_setup;
-+ master->prepare_message = rt2880_spi_prepare_message;
-+ master->set_cs = rt2880_spi_set_cs;
-+ master->transfer_one = rt2880_spi_transfer_one,
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_master_get_devdata(master);
-+ rs->master = master;
-+ rs->base = base;
-+ rs->clk = clk;
-+
-+ if (atomic_inc_return(&hw_reset_count) == 1)
-+ device_reset(&pdev->dev);
-+
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
-+ goto err_master;
-+ }
-+
-+ return ret;
-+
-+err_master:
-+ spi_master_put(master);
-+ kfree(master);
-+err_clk:
-+ clk_disable_unprepare(clk);
-+
-+ return ret;
-+}
-+
-+static int rt2880_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_master_get_devdata(master);
-+
-+ clk_disable_unprepare(rs->clk);
-+ atomic_dec(&hw_reset_count);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+ { .compatible = "ralink,rt2880-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
-+static struct platform_driver rt2880_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_spi_match,
-+ },
-+ .probe = rt2880_spi_probe,
-+ .remove = rt2880_spi_remove,
-+};
-+
-+module_platform_driver(rt2880_spi_driver);
-+
-+MODULE_DESCRIPTION("Ralink SPI driver");
-+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.14/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.14/0043-spi-add-mt7621-support.patch
deleted file mode 100644
index b607f2bdf4..0000000000
--- a/target/linux/ramips/patches-4.14/0043-spi-add-mt7621-support.patch
+++ /dev/null
@@ -1,487 +0,0 @@
-From cbd66c626e16743b05af807ad48012c0a097b9fb Mon Sep 17 00:00:00 2001
-From: Stefan Roese <sr@denx.de>
-Date: Mon, 25 Mar 2019 09:29:25 +0100
-Subject: [PATCH] spi: mt7621: Move SPI driver out of staging
-
-This patch moves the MT7621 SPI driver, which is used on some Ralink /
-MediaTek MT76xx MIPS SoC's, out of the staging directory. No changes to
-the source code are done in this patch.
-
-This driver version was tested successfully on an MT7688 based platform
-with an SPI NOR on CS0 and an SPI NAND on CS1 without any issues (so
-far).
-
-This patch also documents the devicetree bindings for the MT7621 SPI
-device driver.
-
-Signed-off-by: Stefan Roese <sr@denx.de>
-Cc: Rob Herring <robh@kernel.org>
-Cc: Mark Brown <broonie@kernel.org>
-Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Cc: NeilBrown <neil@brown.name>
-Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
-Cc: Chuanhong Guo <gch981213@gmail.com>
-Cc: John Crispin <john@phrozen.org>
-Cc: Armando Miraglia <arma2ff0@gmail.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../devicetree/bindings/spi/spi-mt7621.txt | 26 ++++++
- drivers/spi/Kconfig | 6 ++
- drivers/spi/Makefile | 1 +
- .../{staging/mt7621-spi => spi}/spi-mt7621.c | 83 +++++++++----------
- drivers/staging/Kconfig | 2 -
- drivers/staging/Makefile | 1 -
- drivers/staging/mt7621-spi/Kconfig | 6 --
- drivers/staging/mt7621-spi/Makefile | 1 -
- drivers/staging/mt7621-spi/TODO | 5 --
- 9 files changed, 74 insertions(+), 57 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-mt7621.txt
- rename drivers/{staging/mt7621-spi => spi}/spi-mt7621.c (88%)
- delete mode 100644 drivers/staging/mt7621-spi/Kconfig
- delete mode 100644 drivers/staging/mt7621-spi/Makefile
- delete mode 100644 drivers/staging/mt7621-spi/TODO
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -569,6 +569,12 @@ config SPI_RT2880
- help
- This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-
-+config SPI_MT7621
-+ tristate "MediaTek MT7621 SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the MediaTek MT7621 SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp
- obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
- obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
- obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
-+obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
- obj-$(CONFIG_SPI_MXS) += spi-mxs.o
- obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
- obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
---- /dev/null
-+++ b/drivers/spi/spi-mt7621.c
-@@ -0,0 +1,416 @@
-+// SPDX-License-Identifier: GPL-2.0
-+//
-+// spi-mt7621.c -- MediaTek MT7621 SPI controller driver
-+//
-+// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
-+//
-+// Some parts are based on spi-orion.c:
-+// Author: Shadi Ammouri <shadi@marvell.com>
-+// Copyright (C) 2007-2008 Marvell Ltd.
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+
-+#define DRIVER_NAME "spi-mt7621"
-+
-+/* in usec */
-+#define RALINK_SPI_WAIT_MAX_LOOP 2000
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+#define MT7621_SPI_TRANS 0x00
-+#define SPITRANS_BUSY BIT(16)
-+
-+#define MT7621_SPI_OPCODE 0x04
-+#define MT7621_SPI_DATA0 0x08
-+#define MT7621_SPI_DATA4 0x18
-+#define SPI_CTL_TX_RX_CNT_MASK 0xff
-+#define SPI_CTL_START BIT(8)
-+
-+#define MT7621_SPI_MASTER 0x28
-+#define MASTER_MORE_BUFMODE BIT(2)
-+#define MASTER_FULL_DUPLEX BIT(10)
-+#define MASTER_RS_CLK_SEL GENMASK(27, 16)
-+#define MASTER_RS_CLK_SEL_SHIFT 16
-+#define MASTER_RS_SLAVE_SEL GENMASK(31, 29)
-+
-+#define MT7621_SPI_MOREBUF 0x2c
-+#define MT7621_SPI_POLAR 0x38
-+#define MT7621_SPI_SPACE 0x3c
-+
-+#define MT7621_CPHA BIT(5)
-+#define MT7621_CPOL BIT(4)
-+#define MT7621_LSB_FIRST BIT(3)
-+
-+struct mt7621_spi {
-+ struct spi_controller *master;
-+ void __iomem *base;
-+ unsigned int sys_freq;
-+ unsigned int speed;
-+ struct clk *clk;
-+ int pending_write;
-+};
-+
-+static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
-+{
-+ return spi_controller_get_devdata(spi->master);
-+}
-+
-+static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+ int cs = spi->chip_select;
-+ u32 polar = 0;
-+ u32 master;
-+
-+ /*
-+ * Select SPI device 7, enable "more buffer mode" and disable
-+ * full-duplex (only half-duplex really works on this chip
-+ * reliably)
-+ */
-+ master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
-+ master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE;
-+ master &= ~MASTER_FULL_DUPLEX;
-+ mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
-+
-+ rs->pending_write = 0;
-+
-+ if (enable)
-+ polar = BIT(cs);
-+ mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
-+}
-+
-+static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+ u32 rate;
-+ u32 reg;
-+
-+ dev_dbg(&spi->dev, "speed:%u\n", speed);
-+
-+ rate = DIV_ROUND_UP(rs->sys_freq, speed);
-+ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
-+
-+ if (rate > 4097)
-+ return -EINVAL;
-+
-+ if (rate < 2)
-+ rate = 2;
-+
-+ reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
-+ reg &= ~MASTER_RS_CLK_SEL;
-+ reg |= (rate - 2) << MASTER_RS_CLK_SEL_SHIFT;
-+ rs->speed = speed;
-+
-+ reg &= ~MT7621_LSB_FIRST;
-+ if (spi->mode & SPI_LSB_FIRST)
-+ reg |= MT7621_LSB_FIRST;
-+
-+ /*
-+ * This SPI controller seems to be tested on SPI flash only and some
-+ * bits are swizzled under other SPI modes probably due to incorrect
-+ * wiring inside the silicon. Only mode 0 works correctly.
-+ */
-+ reg &= ~(MT7621_CPHA | MT7621_CPOL);
-+
-+ mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
-+
-+ return 0;
-+}
-+
-+static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
-+{
-+ int i;
-+
-+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
-+ u32 status;
-+
-+ status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
-+ if ((status & SPITRANS_BUSY) == 0)
-+ return 0;
-+ cpu_relax();
-+ udelay(1);
-+ }
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
-+ int rx_len, u8 *buf)
-+{
-+ int tx_len;
-+
-+ /*
-+ * Combine with any pending write, and perform one or more half-duplex
-+ * transactions reading 'len' bytes. Data to be written is already in
-+ * MT7621_SPI_DATA.
-+ */
-+ tx_len = rs->pending_write;
-+ rs->pending_write = 0;
-+
-+ while (rx_len || tx_len) {
-+ int i;
-+ u32 val = (min(tx_len, 4) * 8) << 24;
-+ int rx = min(rx_len, 32);
-+
-+ if (tx_len > 4)
-+ val |= (tx_len - 4) * 8;
-+ val |= (rx * 8) << 12;
-+ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
-+
-+ tx_len = 0;
-+
-+ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
-+ val |= SPI_CTL_START;
-+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
-+
-+ mt7621_spi_wait_till_ready(rs);
-+
-+ for (i = 0; i < rx; i++) {
-+ if ((i % 4) == 0)
-+ val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
-+ *buf++ = val & 0xff;
-+ val >>= 8;
-+ }
-+
-+ rx_len -= i;
-+ }
-+}
-+
-+static inline void mt7621_spi_flush(struct mt7621_spi *rs)
-+{
-+ mt7621_spi_read_half_duplex(rs, 0, NULL);
-+}
-+
-+static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
-+ int tx_len, const u8 *buf)
-+{
-+ int len = rs->pending_write;
-+ int val = 0;
-+
-+ if (len & 3) {
-+ val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
-+ if (len < 4) {
-+ val <<= (4 - len) * 8;
-+ val = swab32(val);
-+ }
-+ }
-+
-+ while (tx_len > 0) {
-+ if (len >= 36) {
-+ rs->pending_write = len;
-+ mt7621_spi_flush(rs);
-+ len = 0;
-+ }
-+
-+ val |= *buf++ << (8 * (len & 3));
-+ len++;
-+ if ((len & 3) == 0) {
-+ if (len == 4)
-+ /* The byte-order of the opcode is weird! */
-+ val = swab32(val);
-+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
-+ val = 0;
-+ }
-+ tx_len -= 1;
-+ }
-+
-+ if (len & 3) {
-+ if (len < 4) {
-+ val = swab32(val);
-+ val >>= (4 - len) * 8;
-+ }
-+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
-+ }
-+
-+ rs->pending_write = len;
-+}
-+
-+static int mt7621_spi_transfer_one_message(struct spi_controller *master,
-+ struct spi_message *m)
-+{
-+ struct mt7621_spi *rs = spi_controller_get_devdata(master);
-+ struct spi_device *spi = m->spi;
-+ unsigned int speed = spi->max_speed_hz;
-+ struct spi_transfer *t = NULL;
-+ int status = 0;
-+
-+ mt7621_spi_wait_till_ready(rs);
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list)
-+ if (t->speed_hz < speed)
-+ speed = t->speed_hz;
-+
-+ if (mt7621_spi_prepare(spi, speed)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ /* Assert CS */
-+ mt7621_spi_set_cs(spi, 1);
-+
-+ m->actual_length = 0;
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ if ((t->rx_buf) && (t->tx_buf)) {
-+ /*
-+ * This controller will shift some extra data out
-+ * of spi_opcode if (mosi_bit_cnt > 0) &&
-+ * (cmd_bit_cnt == 0). So the claimed full-duplex
-+ * support is broken since we have no way to read
-+ * the MISO value during that bit.
-+ */
-+ status = -EIO;
-+ goto msg_done;
-+ } else if (t->rx_buf) {
-+ mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
-+ } else if (t->tx_buf) {
-+ mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
-+ }
-+ m->actual_length += t->len;
-+ }
-+
-+ /* Flush data and deassert CS */
-+ mt7621_spi_flush(rs);
-+ mt7621_spi_set_cs(spi, 0);
-+
-+msg_done:
-+ m->status = status;
-+ spi_finalize_current_message(master);
-+
-+ return 0;
-+}
-+
-+static int mt7621_spi_setup(struct spi_device *spi)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+
-+ if ((spi->max_speed_hz == 0) ||
-+ (spi->max_speed_hz > (rs->sys_freq / 2)))
-+ spi->max_speed_hz = (rs->sys_freq / 2);
-+
-+ if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
-+ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_spi_match[] = {
-+ { .compatible = "ralink,mt7621-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_spi_match);
-+
-+static int mt7621_spi_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct spi_controller *master;
-+ struct mt7621_spi *rs;
-+ void __iomem *base;
-+ struct resource *r;
-+ int status = 0;
-+ struct clk *clk;
-+ int ret;
-+
-+ match = of_match_device(mt7621_spi_match, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
-+ status);
-+ return PTR_ERR(clk);
-+ }
-+
-+ status = clk_prepare_enable(clk);
-+ if (status)
-+ return status;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (!master) {
-+ dev_info(&pdev->dev, "master allocation failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ master->mode_bits = SPI_LSB_FIRST;
-+ master->flags = SPI_CONTROLLER_HALF_DUPLEX;
-+ master->setup = mt7621_spi_setup;
-+ master->transfer_one_message = mt7621_spi_transfer_one_message;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->num_chipselect = 2;
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_controller_get_devdata(master);
-+ rs->base = base;
-+ rs->clk = clk;
-+ rs->master = master;
-+ rs->sys_freq = clk_get_rate(rs->clk);
-+ rs->pending_write = 0;
-+ dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
-+
-+ ret = device_reset(&pdev->dev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "SPI reset failed!\n");
-+ return ret;
-+ }
-+
-+ return devm_spi_register_controller(&pdev->dev, master);
-+}
-+
-+static int mt7621_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_controller *master;
-+ struct mt7621_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_controller_get_devdata(master);
-+
-+ clk_disable_unprepare(rs->clk);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static struct platform_driver mt7621_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .of_match_table = mt7621_spi_match,
-+ },
-+ .probe = mt7621_spi_probe,
-+ .remove = mt7621_spi_remove,
-+};
-+
-+module_platform_driver(mt7621_spi_driver);
-+
-+MODULE_DESCRIPTION("MT7621 SPI driver");
-+MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.14/0044-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-4.14/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
deleted file mode 100644
index 4905aba046..0000000000
--- a/target/linux/ramips/patches-4.14/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ /dev/null
@@ -1,507 +0,0 @@
-From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:52:56 +0100
-Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
- 4 files changed, 359 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
- create mode 100644 drivers/i2c/busses/i2c-ralink.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-@@ -0,0 +1,27 @@
-+I2C for Ralink platforms
-+
-+Required properties :
-+- compatible : Must be "link,rt3052-i2c"
-+- reg: physical base address of the controller and length of memory mapped
-+ region.
-+- #address-cells = <1>;
-+- #size-cells = <0>;
-+
-+Optional properties:
-+- Child nodes conforming to i2c bus binding
-+
-+Example :
-+
-+palmbus@10000000 {
-+ i2c@900 {
-+ compatible = "link,rt3052-i2c";
-+ reg = <0x900 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hwmon@4b {
-+ compatible = "national,lm92";
-+ reg = <0x4b>;
-+ };
-+ };
-+};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -864,6 +864,11 @@ config I2C_RK3X
- This driver can also be built as a module. If so, the module will
- be called i2c-rk3x.
-
-+config I2C_RALINK
-+ tristate "Ralink I2C Controller"
-+ depends on RALINK && !SOC_MT7621
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
- obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
-+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
- obj-$(CONFIG_I2C_QUP) += i2c-qup.o
- obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
- obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,435 @@
-+/*
-+ * drivers/i2c/busses/i2c-ralink.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#define REG_CONFIG_REG 0x00
-+#define REG_CLKDIV_REG 0x04
-+#define REG_DEVADDR_REG 0x08
-+#define REG_ADDR_REG 0x0C
-+#define REG_DATAOUT_REG 0x10
-+#define REG_DATAIN_REG 0x14
-+#define REG_STATUS_REG 0x18
-+#define REG_STARTXFR_REG 0x1C
-+#define REG_BYTECNT_REG 0x20
-+
-+/* REG_CONFIG_REG */
-+#define I2C_ADDRLEN_OFFSET 5
-+#define I2C_DEVADLEN_OFFSET 2
-+#define I2C_ADDRLEN_MASK 0x3
-+#define I2C_ADDR_DIS BIT(1)
-+#define I2C_DEVADDR_DIS BIT(0)
-+#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET)
-+#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET)
-+#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
-+
-+/* REG_CLKDIV_REG */
-+#define I2C_CLKDIV_MASK 0xffff
-+
-+/* REG_DEVADDR_REG */
-+#define I2C_DEVADDR_MASK 0x7f
-+
-+/* REG_ADDR_REG */
-+#define I2C_ADDR_MASK 0xff
-+
-+/* REG_STATUS_REG */
-+#define I2C_STARTERR BIT(4)
-+#define I2C_ACKERR BIT(3)
-+#define I2C_DATARDY BIT(2)
-+#define I2C_SDOEMPTY BIT(1)
-+#define I2C_BUSY BIT(0)
-+
-+/* REG_STARTXFR_REG */
-+#define NOSTOP_CMD BIT(2)
-+#define NODATA_CMD BIT(1)
-+#define READ_CMD BIT(0)
-+
-+/* REG_BYTECNT_REG */
-+#define BYTECNT_MAX 64
-+#define SET_BYTECNT(x) (x - 1)
-+
-+/* timeout waiting for I2C devices to respond (clock streching) */
-+#define TIMEOUT_MS 1000
-+#define DELAY_INTERVAL_US 100
-+
-+struct rt_i2c {
-+ void __iomem *base;
-+ struct clk *clk;
-+ struct device *dev;
-+ struct i2c_adapter adap;
-+ u32 cur_clk;
-+ u32 clk_div;
-+ u32 flags;
-+};
-+
-+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
-+{
-+ iowrite32(val, i2c->base + reg);
-+}
-+
-+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
-+{
-+ return ioread32(i2c->base + reg);
-+}
-+
-+static int poll_down_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+
-+ do {
-+ if (!(readl_relaxed(addr) & mask))
-+ return 0;
-+
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
-+}
-+
-+static int rt_i2c_wait_idle(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int poll_up_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+ u32 status;
-+
-+ do {
-+ status = readl_relaxed(addr);
-+
-+ /* check error status */
-+ if (status & I2C_STARTERR)
-+ return -EAGAIN;
-+ else if (status & I2C_ACKERR)
-+ return -ENXIO;
-+ else if (status & mask)
-+ return 0;
-+
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static void rt_i2c_reset(struct rt_i2c *i2c)
-+{
-+ device_reset(i2c->adap.dev.parent);
-+ barrier();
-+ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
-+}
-+
-+static void rt_i2c_dump_reg(struct rt_i2c *i2c)
-+{
-+ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
-+ "addr %08x, dataout %08x, datain %08x, " \
-+ "status %08x, startxfr %08x, bytecnt %08x\n",
-+ rt_i2c_r32(i2c, REG_CONFIG_REG),
-+ rt_i2c_r32(i2c, REG_CLKDIV_REG),
-+ rt_i2c_r32(i2c, REG_DEVADDR_REG),
-+ rt_i2c_r32(i2c, REG_ADDR_REG),
-+ rt_i2c_r32(i2c, REG_DATAOUT_REG),
-+ rt_i2c_r32(i2c, REG_DATAIN_REG),
-+ rt_i2c_r32(i2c, REG_STATUS_REG),
-+ rt_i2c_r32(i2c, REG_STARTXFR_REG),
-+ rt_i2c_r32(i2c, REG_BYTECNT_REG));
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-+ int num)
-+{
-+ struct rt_i2c *i2c;
-+ struct i2c_msg *pmsg;
-+ unsigned char addr;
-+ int i, j, ret;
-+ u32 cmd;
-+
-+ i2c = i2c_get_adapdata(adap);
-+
-+ for (i = 0; i < num; i++) {
-+ pmsg = &msgs[i];
-+ if (i == (num - 1))
-+ cmd = 0;
-+ else
-+ cmd = NOSTOP_CMD;
-+
-+ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
-+ pmsg->addr, pmsg->len, pmsg->flags,
-+ (cmd == 0)? 1 : 0);
-+
-+ /* wait hardware idle */
-+ if ((ret = rt_i2c_wait_idle(i2c)))
-+ goto err_timeout;
-+
-+ if (pmsg->flags & I2C_M_TEN) {
-+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
-+ /* 10 bits address */
-+ addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
-+ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
-+ REG_DEVADDR_REG);
-+ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
-+ REG_ADDR_REG);
-+ } else {
-+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
-+ REG_CONFIG_REG);
-+ /* 7 bits address */
-+ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
-+ REG_DEVADDR_REG);
-+ }
-+
-+ /* buffer length */
-+ if (pmsg->len == 0)
-+ cmd |= NODATA_CMD;
-+ else
-+ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
-+ REG_BYTECNT_REG);
-+
-+ j = 0;
-+ if (pmsg->flags & I2C_M_RD) {
-+ cmd |= READ_CMD;
-+ /* start transfer */
-+ barrier();
-+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+ do {
-+ /* wait */
-+ if ((ret = rt_i2c_wait_rx_done(i2c)))
-+ goto err_timeout;
-+ /* read data */
-+ if (pmsg->len)
-+ pmsg->buf[j] = rt_i2c_r32(i2c,
-+ REG_DATAIN_REG);
-+ j++;
-+ } while (j < pmsg->len);
-+ } else {
-+ do {
-+ /* write data */
-+ if (pmsg->len)
-+ rt_i2c_w32(i2c, pmsg->buf[j],
-+ REG_DATAOUT_REG);
-+ /* start transfer */
-+ if (j == 0) {
-+ barrier();
-+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+ }
-+ /* wait */
-+ if ((ret = rt_i2c_wait_tx_done(i2c)))
-+ goto err_timeout;
-+ j++;
-+ } while (j < pmsg->len);
-+ }
-+ }
-+ /* the return value is number of executed messages */
-+ ret = i;
-+
-+ return ret;
-+
-+err_timeout:
-+ rt_i2c_dump_reg(i2c);
-+ rt_i2c_reset(i2c);
-+ return ret;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+ .master_xfer = rt_i2c_master_xfer,
-+ .functionality = rt_i2c_func,
-+};
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+ { .compatible = "ralink,rt2880-i2c" },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static struct i2c_adapter_quirks rt_i2c_quirks = {
-+ .max_write_len = BYTECNT_MAX,
-+ .max_read_len = BYTECNT_MAX,
-+};
-+
-+static int rt_i2c_init(struct rt_i2c *i2c)
-+{
-+ u32 reg;
-+
-+ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
-+ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
-+ (2 * i2c->cur_clk);
-+ if (i2c->clk_div < 8)
-+ i2c->clk_div = 8;
-+ if (i2c->clk_div > I2C_CLKDIV_MASK)
-+ i2c->clk_div = I2C_CLKDIV_MASK;
-+
-+ /* check support combinde/repeated start message */
-+ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
-+ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
-+
-+ rt_i2c_reset(i2c);
-+
-+ return reg;
-+}
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct rt_i2c *i2c;
-+ struct i2c_adapter *adap;
-+ const struct of_device_id *match;
-+ int ret, restart;
-+
-+ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENODEV;
-+ }
-+
-+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
-+ if (!i2c) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+
-+ i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(i2c->base))
-+ return PTR_ERR(i2c->base);
-+
-+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(i2c->clk)) {
-+ dev_err(&pdev->dev, "no clock defined\n");
-+ return -ENODEV;
-+ }
-+ clk_prepare_enable(i2c->clk);
-+ i2c->dev = &pdev->dev;
-+
-+ if (of_property_read_u32(pdev->dev.of_node,
-+ "clock-frequency", &i2c->cur_clk))
-+ i2c->cur_clk = 100000;
-+
-+ adap = &i2c->adap;
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adap->algo = &rt_i2c_algo;
-+ adap->retries = 3;
-+ adap->dev.parent = &pdev->dev;
-+ i2c_set_adapdata(adap, i2c);
-+ adap->dev.of_node = pdev->dev.of_node;
-+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+ adap->quirks = &rt_i2c_quirks;
-+
-+ platform_set_drvdata(pdev, i2c);
-+
-+ restart = rt_i2c_init(i2c);
-+
-+ ret = i2c_add_adapter(adap);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to add adapter\n");
-+ clk_disable_unprepare(i2c->clk);
-+ return ret;
-+ }
-+
-+ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
-+ i2c->cur_clk/1000, restart ? "" : "not ");
-+
-+ return ret;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+ struct rt_i2c *i2c = platform_get_drvdata(pdev);
-+
-+ i2c_del_adapter(&i2c->adap);
-+ clk_disable_unprepare(i2c->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rt_i2c_driver = {
-+ .probe = rt_i2c_probe,
-+ .remove = rt_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-ralink",
-+ .of_match_table = i2c_rt_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+ return platform_driver_register(&rt_i2c_driver);
-+}
-+subsys_initcall(i2c_rt_init);
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+ platform_driver_unregister(&rt_i2c_driver);
-+}
-+module_exit(i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("Ralink I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:Ralink-I2C");
diff --git a/target/linux/ramips/patches-4.14/0045-i2c-add-mt7621-driver.patch b/target/linux/ramips/patches-4.14/0045-i2c-add-mt7621-driver.patch
deleted file mode 100644
index a848085520..0000000000
--- a/target/linux/ramips/patches-4.14/0045-i2c-add-mt7621-driver.patch
+++ /dev/null
@@ -1,473 +0,0 @@
-From d5c54ff3d1db0a4348fa04d8e78f3bf6063e3afc Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:21:27 +0100
-Subject: [PATCH 45/53] i2c: add mt7621 driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-mt7621.c | 303 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 308 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-mt7621.c
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -869,6 +869,11 @@ config I2C_RALINK
- depends on RALINK && !SOC_MT7621
- select OF_I2C
-
-+config I2C_MT7621
-+ tristate "MT7621/MT7628 I2C Controller"
-+ depends on RALINK && (SOC_MT7620 || SOC_MT7621)
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
- obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
-+obj-$(CONFIG_I2C_MT7621) += i2c-mt7621.o
- obj-$(CONFIG_I2C_QUP) += i2c-qup.o
- obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
- obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mt7621.c
-@@ -0,0 +1,433 @@
-+/*
-+ * drivers/i2c/busses/i2c-mt7621.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#define REG_SM0CFG0 0x08
-+#define REG_SM0DOUT 0x10
-+#define REG_SM0DIN 0x14
-+#define REG_SM0ST 0x18
-+#define REG_SM0AUTO 0x1C
-+#define REG_SM0CFG1 0x20
-+#define REG_SM0CFG2 0x28
-+#define REG_SM0CTL0 0x40
-+#define REG_SM0CTL1 0x44
-+#define REG_SM0D0 0x50
-+#define REG_SM0D1 0x54
-+#define REG_PINTEN 0x5C
-+#define REG_PINTST 0x60
-+#define REG_PINTCL 0x64
-+
-+/* REG_SM0CFG0 */
-+#define I2C_DEVADDR_MASK 0x7f
-+
-+/* REG_SM0ST */
-+#define I2C_DATARDY BIT(2)
-+#define I2C_SDOEMPTY BIT(1)
-+#define I2C_BUSY BIT(0)
-+
-+/* REG_SM0AUTO */
-+#define READ_CMD BIT(0)
-+
-+/* REG_SM0CFG1 */
-+#define BYTECNT_MAX 64
-+#define SET_BYTECNT(x) (x - 1)
-+
-+/* REG_SM0CFG2 */
-+#define AUTOMODE_EN BIT(0)
-+
-+/* REG_SM0CTL0 */
-+#define ODRAIN_HIGH_SM0 BIT(31)
-+#define VSYNC_SHIFT 28
-+#define VSYNC_MASK 0x3
-+#define VSYNC_PULSE (0x1 << VSYNC_SHIFT)
-+#define VSYNC_RISING (0x2 << VSYNC_SHIFT)
-+#define CLK_DIV_SHIFT 16
-+#define CLK_DIV_MASK 0xfff
-+#define DEG_CNT_SHIFT 8
-+#define DEG_CNT_MASK 0xff
-+#define WAIT_HIGH BIT(6)
-+#define DEG_EN BIT(5)
-+#define CS_STATUA BIT(4)
-+#define SCL_STATUS BIT(3)
-+#define SDA_STATUS BIT(2)
-+#define SM0_EN BIT(1)
-+#define SCL_STRECH BIT(0)
-+
-+/* REG_SM0CTL1 */
-+#define ACK_SHIFT 16
-+#define ACK_MASK 0xff
-+#define PGLEN_SHIFT 8
-+#define PGLEN_MASK 0x7
-+#define SM0_MODE_SHIFT 4
-+#define SM0_MODE_MASK 0x7
-+#define SM0_MODE_START 0x1
-+#define SM0_MODE_WRITE 0x2
-+#define SM0_MODE_STOP 0x3
-+#define SM0_MODE_READ_NACK 0x4
-+#define SM0_MODE_READ_ACK 0x5
-+#define SM0_TRI_BUSY BIT(0)
-+
-+/* timeout waiting for I2C devices to respond (clock streching) */
-+#define TIMEOUT_MS 1000
-+#define DELAY_INTERVAL_US 100
-+
-+struct mtk_i2c {
-+ void __iomem *base;
-+ struct clk *clk;
-+ struct device *dev;
-+ struct i2c_adapter adap;
-+ u32 cur_clk;
-+ u32 clk_div;
-+ u32 flags;
-+};
-+
-+static void mtk_i2c_w32(struct mtk_i2c *i2c, u32 val, unsigned reg)
-+{
-+ iowrite32(val, i2c->base + reg);
-+}
-+
-+static u32 mtk_i2c_r32(struct mtk_i2c *i2c, unsigned reg)
-+{
-+ return ioread32(i2c->base + reg);
-+}
-+
-+static int poll_down_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+
-+ do {
-+ if (!(readl_relaxed(addr) & mask))
-+ return 0;
-+
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
-+}
-+
-+static int mtk_i2c_wait_idle(struct mtk_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_down_timeout(i2c->base + REG_SM0ST, I2C_BUSY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int poll_up_timeout(void __iomem *addr, u32 mask)
-+{
-+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+ u32 status;
-+
-+ do {
-+ status = readl_relaxed(addr);
-+ if (status & mask)
-+ return 0;
-+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int mtk_i2c_wait_rx_done(struct mtk_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_SM0ST, I2C_DATARDY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static int mtk_i2c_wait_tx_done(struct mtk_i2c *i2c)
-+{
-+ int ret;
-+
-+ ret = poll_up_timeout(i2c->base + REG_SM0ST, I2C_SDOEMPTY);
-+ if (ret < 0)
-+ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
-+
-+ return ret;
-+}
-+
-+static void mtk_i2c_reset(struct mtk_i2c *i2c)
-+{
-+ u32 reg;
-+ device_reset(i2c->adap.dev.parent);
-+ barrier();
-+
-+ /* ctrl0 */
-+ reg = ODRAIN_HIGH_SM0 | VSYNC_PULSE | (i2c->clk_div << CLK_DIV_SHIFT) |
-+ WAIT_HIGH | SM0_EN;
-+ mtk_i2c_w32(i2c, reg, REG_SM0CTL0);
-+
-+ /* auto mode */
-+ mtk_i2c_w32(i2c, AUTOMODE_EN, REG_SM0CFG2);
-+}
-+
-+static void mtk_i2c_dump_reg(struct mtk_i2c *i2c)
-+{
-+ dev_dbg(i2c->dev, "cfg0 %08x, dout %08x, din %08x, " \
-+ "status %08x, auto %08x, cfg1 %08x, " \
-+ "cfg2 %08x, ctl0 %08x, ctl1 %08x\n",
-+ mtk_i2c_r32(i2c, REG_SM0CFG0),
-+ mtk_i2c_r32(i2c, REG_SM0DOUT),
-+ mtk_i2c_r32(i2c, REG_SM0DIN),
-+ mtk_i2c_r32(i2c, REG_SM0ST),
-+ mtk_i2c_r32(i2c, REG_SM0AUTO),
-+ mtk_i2c_r32(i2c, REG_SM0CFG1),
-+ mtk_i2c_r32(i2c, REG_SM0CFG2),
-+ mtk_i2c_r32(i2c, REG_SM0CTL0),
-+ mtk_i2c_r32(i2c, REG_SM0CTL1));
-+}
-+
-+static int mtk_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-+ int num)
-+{
-+ struct mtk_i2c *i2c;
-+ struct i2c_msg *pmsg;
-+ int i, j, ret;
-+ u32 cmd;
-+
-+ i2c = i2c_get_adapdata(adap);
-+
-+ for (i = 0; i < num; i++) {
-+ pmsg = &msgs[i];
-+ cmd = 0;
-+
-+ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x\n",
-+ pmsg->addr, pmsg->len, pmsg->flags);
-+
-+ /* wait hardware idle */
-+ if ((ret = mtk_i2c_wait_idle(i2c)))
-+ goto err_timeout;
-+
-+ if (pmsg->flags & I2C_M_TEN) {
-+ dev_dbg(i2c->dev, "10 bits addr not supported\n");
-+ return -EINVAL;
-+ } else {
-+ /* 7 bits address */
-+ mtk_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
-+ REG_SM0CFG0);
-+ }
-+
-+ /* buffer length */
-+ if (pmsg->len == 0) {
-+ dev_dbg(i2c->dev, "length is 0\n");
-+ return -EINVAL;
-+ } else
-+ mtk_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
-+ REG_SM0CFG1);
-+
-+ j = 0;
-+ if (pmsg->flags & I2C_M_RD) {
-+ cmd |= READ_CMD;
-+ /* start transfer */
-+ barrier();
-+ mtk_i2c_w32(i2c, cmd, REG_SM0AUTO);
-+ do {
-+ /* wait */
-+ if ((ret = mtk_i2c_wait_rx_done(i2c)))
-+ goto err_timeout;
-+ /* read data */
-+ if (pmsg->len)
-+ pmsg->buf[j] = mtk_i2c_r32(i2c,
-+ REG_SM0DIN);
-+ j++;
-+ } while (j < pmsg->len);
-+ } else {
-+ do {
-+ /* write data */
-+ if (pmsg->len)
-+ mtk_i2c_w32(i2c, pmsg->buf[j],
-+ REG_SM0DOUT);
-+ /* start transfer */
-+ if (j == 0) {
-+ barrier();
-+ mtk_i2c_w32(i2c, cmd, REG_SM0AUTO);
-+ }
-+ /* wait */
-+ if ((ret = mtk_i2c_wait_tx_done(i2c)))
-+ goto err_timeout;
-+ j++;
-+ } while (j < pmsg->len);
-+ }
-+ }
-+ /* the return value is number of executed messages */
-+ ret = i;
-+
-+ return ret;
-+
-+err_timeout:
-+ mtk_i2c_dump_reg(i2c);
-+ mtk_i2c_reset(i2c);
-+ return ret;
-+}
-+
-+static u32 mtk_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm mtk_i2c_algo = {
-+ .master_xfer = mtk_i2c_master_xfer,
-+ .functionality = mtk_i2c_func,
-+};
-+
-+static const struct of_device_id i2c_mtk_dt_ids[] = {
-+ { .compatible = "mediatek,mt7621-i2c" },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_mtk_dt_ids);
-+
-+static struct i2c_adapter_quirks mtk_i2c_quirks = {
-+ .max_write_len = BYTECNT_MAX,
-+ .max_read_len = BYTECNT_MAX,
-+};
-+
-+static void mtk_i2c_init(struct mtk_i2c *i2c)
-+{
-+ i2c->clk_div = clk_get_rate(i2c->clk) / i2c->cur_clk;
-+ if (i2c->clk_div > CLK_DIV_MASK)
-+ i2c->clk_div = CLK_DIV_MASK;
-+
-+ mtk_i2c_reset(i2c);
-+}
-+
-+static int mtk_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct mtk_i2c *i2c;
-+ struct i2c_adapter *adap;
-+ const struct of_device_id *match;
-+ int ret;
-+
-+ match = of_match_device(i2c_mtk_dt_ids, &pdev->dev);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENODEV;
-+ }
-+
-+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct mtk_i2c), GFP_KERNEL);
-+ if (!i2c) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+
-+ i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(i2c->base))
-+ return PTR_ERR(i2c->base);
-+
-+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(i2c->clk)) {
-+ dev_err(&pdev->dev, "no clock defined\n");
-+ return -ENODEV;
-+ }
-+ clk_prepare_enable(i2c->clk);
-+ i2c->dev = &pdev->dev;
-+
-+ if (of_property_read_u32(pdev->dev.of_node,
-+ "clock-frequency", &i2c->cur_clk))
-+ i2c->cur_clk = 100000;
-+
-+ adap = &i2c->adap;
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adap->algo = &mtk_i2c_algo;
-+ adap->retries = 3;
-+ adap->dev.parent = &pdev->dev;
-+ i2c_set_adapdata(adap, i2c);
-+ adap->dev.of_node = pdev->dev.of_node;
-+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+ adap->quirks = &mtk_i2c_quirks;
-+
-+ platform_set_drvdata(pdev, i2c);
-+
-+ mtk_i2c_init(i2c);
-+
-+ ret = i2c_add_adapter(adap);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to add adapter\n");
-+ clk_disable_unprepare(i2c->clk);
-+ return ret;
-+ }
-+
-+ dev_info(&pdev->dev, "clock %uKHz, re-start not support\n",
-+ i2c->cur_clk/1000);
-+
-+ return ret;
-+}
-+
-+static int mtk_i2c_remove(struct platform_device *pdev)
-+{
-+ struct mtk_i2c *i2c = platform_get_drvdata(pdev);
-+
-+ i2c_del_adapter(&i2c->adap);
-+ clk_disable_unprepare(i2c->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_i2c_driver = {
-+ .probe = mtk_i2c_probe,
-+ .remove = mtk_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-mt7621",
-+ .of_match_table = i2c_mtk_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_mtk_init (void)
-+{
-+ return platform_driver_register(&mtk_i2c_driver);
-+}
-+subsys_initcall(i2c_mtk_init);
-+
-+static void __exit i2c_mtk_exit (void)
-+{
-+ platform_driver_unregister(&mtk_i2c_driver);
-+}
-+module_exit(i2c_mtk_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("MT7621 I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:MT7621-I2C");
diff --git a/target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
deleted file mode 100644
index 0535811ea3..0000000000
--- a/target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 13 Nov 2014 19:08:40 +0100
-Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mmc/host/Kconfig | 2 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/mtk-mmc/Kconfig | 16 +
- drivers/mmc/host/mtk-mmc/Makefile | 42 +
- drivers/mmc/host/mtk-mmc/board.h | 137 ++
- drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
- drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
- drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
- drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
- 9 files changed, 4762 insertions(+)
- create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
- create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
- create mode 100644 drivers/mmc/host/mtk-mmc/board.h
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
- create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
- create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -901,3 +901,5 @@ config MMC_SDHCI_XENON
- This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
- If you have a controller with this interface, say Y or M here.
- If unsure, say N.
-+
-+source "drivers/mmc/host/mtk-mmc/Kconfig"
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for MMC/SD host controller drivers
- #
-
-+obj-$(CONFIG_MTK_MMC) += mtk-mmc/
- obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
- armmmci-y := mmci.o
- armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
diff --git a/target/linux/ramips/patches-4.14/0047-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-4.14/0047-DMA-ralink-add-rt2880-dma-engine.patch
deleted file mode 100644
index b74a48a220..0000000000
--- a/target/linux/ramips/patches-4.14/0047-DMA-ralink-add-rt2880-dma-engine.patch
+++ /dev/null
@@ -1,1757 +0,0 @@
-From f1c4d9e622c800e1f38b3818f933ec7597d1ccfb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:29:51 +0100
-Subject: [PATCH 47/53] DMA: ralink: add rt2880 dma engine
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/dma/Kconfig | 6 +
- drivers/dma/Makefile | 1 +
- drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
- include/linux/dmaengine.h | 1 +
- 4 files changed, 585 insertions(+)
- create mode 100644 drivers/dma/ralink-gdma.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -40,6 +40,18 @@ config ASYNC_TX_ENABLE_CHANNEL_SWITCH
- config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
- bool
-
-+config DMA_RALINK
-+ tristate "RALINK DMA support"
-+ depends on RALINK && !SOC_RT288X
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+
-+config MTK_HSDMA
-+ tristate "MTK HSDMA support"
-+ depends on RALINK && SOC_MT7621
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+
- config DMA_ENGINE
- bool
-
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -71,6 +71,8 @@ obj-$(CONFIG_TI_EDMA) += edma.o
- obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx_dma.o
- obj-$(CONFIG_ST_FDMA) += st_fdma.o
-+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
-+obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
-
- obj-y += qcom/
- obj-y += xilinx/
---- /dev/null
-+++ b/drivers/dma/ralink-gdma.c
-@@ -0,0 +1,928 @@
-+/*
-+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
-+ * GDMA4740 DMAC support
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/of_dma.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+
-+#include "virt-dma.h"
-+
-+#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
-+#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
-+
-+#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
-+#define GDMA_REG_CTRL0_TX_MASK 0xffff
-+#define GDMA_REG_CTRL0_TX_SHIFT 16
-+#define GDMA_REG_CTRL0_CURR_MASK 0xff
-+#define GDMA_REG_CTRL0_CURR_SHIFT 8
-+#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
-+#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
-+#define GDMA_REG_CTRL0_BURST_MASK 0x7
-+#define GDMA_REG_CTRL0_BURST_SHIFT 3
-+#define GDMA_REG_CTRL0_DONE_INT BIT(2)
-+#define GDMA_REG_CTRL0_ENABLE BIT(1)
-+#define GDMA_REG_CTRL0_SW_MODE BIT(0)
-+
-+#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
-+#define GDMA_REG_CTRL1_SEG_MASK 0xf
-+#define GDMA_REG_CTRL1_SEG_SHIFT 22
-+#define GDMA_REG_CTRL1_REQ_MASK 0x3f
-+#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
-+#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
-+#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
-+#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
-+#define GDMA_REG_CTRL1_NEXT_SHIFT 3
-+#define GDMA_REG_CTRL1_COHERENT BIT(2)
-+#define GDMA_REG_CTRL1_FAIL BIT(1)
-+#define GDMA_REG_CTRL1_MASK BIT(0)
-+
-+#define GDMA_REG_UNMASK_INT 0x200
-+#define GDMA_REG_DONE_INT 0x204
-+
-+#define GDMA_REG_GCT 0x220
-+#define GDMA_REG_GCT_CHAN_MASK 0x3
-+#define GDMA_REG_GCT_CHAN_SHIFT 3
-+#define GDMA_REG_GCT_VER_MASK 0x3
-+#define GDMA_REG_GCT_VER_SHIFT 1
-+#define GDMA_REG_GCT_ARBIT_RR BIT(0)
-+
-+#define GDMA_REG_REQSTS 0x2a0
-+#define GDMA_REG_ACKSTS 0x2a4
-+#define GDMA_REG_FINSTS 0x2a8
-+
-+/* for RT305X gdma registers */
-+#define GDMA_RT305X_CTRL0_REQ_MASK 0xf
-+#define GDMA_RT305X_CTRL0_SRC_REQ_SHIFT 12
-+#define GDMA_RT305X_CTRL0_DST_REQ_SHIFT 8
-+
-+#define GDMA_RT305X_CTRL1_FAIL BIT(4)
-+#define GDMA_RT305X_CTRL1_NEXT_MASK 0x7
-+#define GDMA_RT305X_CTRL1_NEXT_SHIFT 1
-+
-+#define GDMA_RT305X_STATUS_INT 0x80
-+#define GDMA_RT305X_STATUS_SIGNAL 0x84
-+#define GDMA_RT305X_GCT 0x88
-+
-+/* for MT7621 gdma registers */
-+#define GDMA_REG_PERF_START(x) (0x230 + (x) * 0x8)
-+#define GDMA_REG_PERF_END(x) (0x234 + (x) * 0x8)
-+
-+enum gdma_dma_transfer_size {
-+ GDMA_TRANSFER_SIZE_4BYTE = 0,
-+ GDMA_TRANSFER_SIZE_8BYTE = 1,
-+ GDMA_TRANSFER_SIZE_16BYTE = 2,
-+ GDMA_TRANSFER_SIZE_32BYTE = 3,
-+ GDMA_TRANSFER_SIZE_64BYTE = 4,
-+};
-+
-+struct gdma_dma_sg {
-+ dma_addr_t src_addr;
-+ dma_addr_t dst_addr;
-+ u32 len;
-+};
-+
-+struct gdma_dma_desc {
-+ struct virt_dma_desc vdesc;
-+
-+ enum dma_transfer_direction direction;
-+ bool cyclic;
-+
-+ u32 residue;
-+ unsigned int num_sgs;
-+ struct gdma_dma_sg sg[];
-+};
-+
-+struct gdma_dmaengine_chan {
-+ struct virt_dma_chan vchan;
-+ unsigned int id;
-+ unsigned int slave_id;
-+
-+ dma_addr_t fifo_addr;
-+ enum gdma_dma_transfer_size burst_size;
-+
-+ struct gdma_dma_desc *desc;
-+ unsigned int next_sg;
-+};
-+
-+struct gdma_dma_dev {
-+ struct dma_device ddev;
-+ struct device_dma_parameters dma_parms;
-+ struct gdma_data *data;
-+ void __iomem *base;
-+ struct tasklet_struct task;
-+ volatile unsigned long chan_issued;
-+ atomic_t cnt;
-+
-+ struct gdma_dmaengine_chan chan[];
-+};
-+
-+struct gdma_data
-+{
-+ int chancnt;
-+ u32 done_int_reg;
-+ void (*init)(struct gdma_dma_dev *dma_dev);
-+ int (*start_transfer)(struct gdma_dmaengine_chan *chan);
-+};
-+
-+static struct gdma_dma_dev *gdma_dma_chan_get_dev(
-+ struct gdma_dmaengine_chan *chan)
-+{
-+ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
-+ ddev);
-+}
-+
-+static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
-+{
-+ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
-+}
-+
-+static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
-+{
-+ return container_of(vdesc, struct gdma_dma_desc, vdesc);
-+}
-+
-+static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
-+ unsigned int reg)
-+{
-+ return readl(dma_dev->base + reg);
-+}
-+
-+static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
-+ unsigned reg, uint32_t val)
-+{
-+ writel(val, dma_dev->base + reg);
-+}
-+
-+static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
-+{
-+ return kzalloc(sizeof(struct gdma_dma_desc) +
-+ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
-+}
-+
-+static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
-+{
-+ if (maxburst < 2)
-+ return GDMA_TRANSFER_SIZE_4BYTE;
-+ else if (maxburst < 4)
-+ return GDMA_TRANSFER_SIZE_8BYTE;
-+ else if (maxburst < 8)
-+ return GDMA_TRANSFER_SIZE_16BYTE;
-+ else if (maxburst < 16)
-+ return GDMA_TRANSFER_SIZE_32BYTE;
-+ else
-+ return GDMA_TRANSFER_SIZE_64BYTE;
-+}
-+
-+static int gdma_dma_config(struct dma_chan *c,
-+ struct dma_slave_config *config)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+
-+ if (config->device_fc) {
-+ dev_err(dma_dev->ddev.dev, "not support flow controller\n");
-+ return -EINVAL;
-+ }
-+
-+ switch (config->direction) {
-+ case DMA_MEM_TO_DEV:
-+ if (config->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) {
-+ dev_err(dma_dev->ddev.dev, "only support 4 byte buswidth\n");
-+ return -EINVAL;
-+ }
-+ chan->slave_id = config->slave_id;
-+ chan->fifo_addr = config->dst_addr;
-+ chan->burst_size = gdma_dma_maxburst(config->dst_maxburst);
-+ break;
-+ case DMA_DEV_TO_MEM:
-+ if (config->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) {
-+ dev_err(dma_dev->ddev.dev, "only support 4 byte buswidth\n");
-+ return -EINVAL;
-+ }
-+ chan->slave_id = config->slave_id;
-+ chan->fifo_addr = config->src_addr;
-+ chan->burst_size = gdma_dma_maxburst(config->src_maxburst);
-+ break;
-+ default:
-+ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
-+ config->direction);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int gdma_dma_terminate_all(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned long flags, timeout;
-+ LIST_HEAD(head);
-+ int i = 0;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ chan->desc = NULL;
-+ clear_bit(chan->id, &dma_dev->chan_issued);
-+ vchan_get_all_descriptors(&chan->vchan, &head);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ vchan_dma_desc_free_list(&chan->vchan, &head);
-+
-+ /* wait dma transfer complete */
-+ timeout = jiffies + msecs_to_jiffies(5000);
-+ while (gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id)) &
-+ GDMA_REG_CTRL0_ENABLE) {
-+ if (time_after_eq(jiffies, timeout)) {
-+ dev_err(dma_dev->ddev.dev, "chan %d wait timeout\n",
-+ chan->id);
-+ /* restore to init value */
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), 0);
-+ break;
-+ }
-+ cpu_relax();
-+ i++;
-+ }
-+
-+ if (i)
-+ dev_dbg(dma_dev->ddev.dev, "terminate chan %d loops %d\n",
-+ chan->id, i);
-+
-+ return 0;
-+}
-+
-+static void rt305x_dump_reg(struct gdma_dma_dev *dma_dev, int id)
-+{
-+ dev_dbg(dma_dev->ddev.dev, "chan %d, src %08x, dst %08x, ctr0 %08x, " \
-+ "ctr1 %08x, intr %08x, signal %08x\n", id,
-+ gdma_dma_read(dma_dev, GDMA_REG_SRC_ADDR(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_DST_ADDR(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_CTRL0(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_CTRL1(id)),
-+ gdma_dma_read(dma_dev, GDMA_RT305X_STATUS_INT),
-+ gdma_dma_read(dma_dev, GDMA_RT305X_STATUS_SIGNAL));
-+}
-+
-+static int rt305x_gdma_start_transfer(struct gdma_dmaengine_chan *chan)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ dma_addr_t src_addr, dst_addr;
-+ struct gdma_dma_sg *sg;
-+ uint32_t ctrl0, ctrl1;
-+
-+ /* verify chan is already stopped */
-+ ctrl0 = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
-+ if (unlikely(ctrl0 & GDMA_REG_CTRL0_ENABLE)) {
-+ dev_err(dma_dev->ddev.dev, "chan %d is start(%08x).\n",
-+ chan->id, ctrl0);
-+ rt305x_dump_reg(dma_dev, chan->id);
-+ return -EINVAL;
-+ }
-+
-+ sg = &chan->desc->sg[chan->next_sg];
-+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
-+ src_addr = sg->src_addr;
-+ dst_addr = chan->fifo_addr;
-+ ctrl0 = GDMA_REG_CTRL0_DST_ADDR_FIXED | \
-+ (8 << GDMA_RT305X_CTRL0_SRC_REQ_SHIFT) | \
-+ (chan->slave_id << GDMA_RT305X_CTRL0_DST_REQ_SHIFT);
-+ } else if (chan->desc->direction == DMA_DEV_TO_MEM) {
-+ src_addr = chan->fifo_addr;
-+ dst_addr = sg->dst_addr;
-+ ctrl0 = GDMA_REG_CTRL0_SRC_ADDR_FIXED | \
-+ (chan->slave_id << GDMA_RT305X_CTRL0_SRC_REQ_SHIFT) | \
-+ (8 << GDMA_RT305X_CTRL0_DST_REQ_SHIFT);
-+ } else if (chan->desc->direction == DMA_MEM_TO_MEM) {
-+ /*
-+ * TODO: memcpy function have bugs. sometime it will copy
-+ * more 8 bytes data when using dmatest verify.
-+ */
-+ src_addr = sg->src_addr;
-+ dst_addr = sg->dst_addr;
-+ ctrl0 = GDMA_REG_CTRL0_SW_MODE | \
-+ (8 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
-+ (8 << GDMA_REG_CTRL1_DST_REQ_SHIFT);
-+ } else {
-+ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
-+ chan->desc->direction);
-+ return -EINVAL;
-+ }
-+
-+ ctrl0 |= (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | \
-+ (chan->burst_size << GDMA_REG_CTRL0_BURST_SHIFT) | \
-+ GDMA_REG_CTRL0_DONE_INT | GDMA_REG_CTRL0_ENABLE;
-+ ctrl1 = chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
-+
-+ chan->next_sg++;
-+ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
-+
-+ /* make sure next_sg is update */
-+ wmb();
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
-+
-+ return 0;
-+}
-+
-+static void rt3883_dump_reg(struct gdma_dma_dev *dma_dev, int id)
-+{
-+ dev_dbg(dma_dev->ddev.dev, "chan %d, src %08x, dst %08x, ctr0 %08x, " \
-+ "ctr1 %08x, unmask %08x, done %08x, " \
-+ "req %08x, ack %08x, fin %08x\n", id,
-+ gdma_dma_read(dma_dev, GDMA_REG_SRC_ADDR(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_DST_ADDR(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_CTRL0(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_CTRL1(id)),
-+ gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT),
-+ gdma_dma_read(dma_dev, GDMA_REG_DONE_INT),
-+ gdma_dma_read(dma_dev, GDMA_REG_REQSTS),
-+ gdma_dma_read(dma_dev, GDMA_REG_ACKSTS),
-+ gdma_dma_read(dma_dev, GDMA_REG_FINSTS));
-+}
-+
-+static int rt3883_gdma_start_transfer(struct gdma_dmaengine_chan *chan)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ dma_addr_t src_addr, dst_addr;
-+ struct gdma_dma_sg *sg;
-+ uint32_t ctrl0, ctrl1;
-+
-+ /* verify chan is already stopped */
-+ ctrl0 = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
-+ if (unlikely(ctrl0 & GDMA_REG_CTRL0_ENABLE)) {
-+ dev_err(dma_dev->ddev.dev, "chan %d is start(%08x).\n",
-+ chan->id, ctrl0);
-+ rt3883_dump_reg(dma_dev, chan->id);
-+ return -EINVAL;
-+ }
-+
-+ sg = &chan->desc->sg[chan->next_sg];
-+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
-+ src_addr = sg->src_addr;
-+ dst_addr = chan->fifo_addr;
-+ ctrl0 = GDMA_REG_CTRL0_DST_ADDR_FIXED;
-+ ctrl1 = (32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
-+ (chan->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT);
-+ } else if (chan->desc->direction == DMA_DEV_TO_MEM) {
-+ src_addr = chan->fifo_addr;
-+ dst_addr = sg->dst_addr;
-+ ctrl0 = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
-+ ctrl1 = (chan->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
-+ (32 << GDMA_REG_CTRL1_DST_REQ_SHIFT) | \
-+ GDMA_REG_CTRL1_COHERENT;
-+ } else if (chan->desc->direction == DMA_MEM_TO_MEM) {
-+ src_addr = sg->src_addr;
-+ dst_addr = sg->dst_addr;
-+ ctrl0 = GDMA_REG_CTRL0_SW_MODE;
-+ ctrl1 = (32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
-+ (32 << GDMA_REG_CTRL1_DST_REQ_SHIFT) | \
-+ GDMA_REG_CTRL1_COHERENT;
-+ } else {
-+ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
-+ chan->desc->direction);
-+ return -EINVAL;
-+ }
-+
-+ ctrl0 |= (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | \
-+ (chan->burst_size << GDMA_REG_CTRL0_BURST_SHIFT) | \
-+ GDMA_REG_CTRL0_DONE_INT | GDMA_REG_CTRL0_ENABLE;
-+ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
-+
-+ chan->next_sg++;
-+ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
-+
-+ /* make sure next_sg is update */
-+ wmb();
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
-+
-+ return 0;
-+}
-+
-+static inline int gdma_start_transfer(struct gdma_dma_dev *dma_dev,
-+ struct gdma_dmaengine_chan *chan)
-+{
-+ return dma_dev->data->start_transfer(chan);
-+}
-+
-+static int gdma_next_desc(struct gdma_dmaengine_chan *chan)
-+{
-+ struct virt_dma_desc *vdesc;
-+
-+ vdesc = vchan_next_desc(&chan->vchan);
-+ if (!vdesc) {
-+ chan->desc = NULL;
-+ return 0;
-+ }
-+ chan->desc = to_gdma_dma_desc(vdesc);
-+ chan->next_sg = 0;
-+
-+ return 1;
-+}
-+
-+static void gdma_dma_chan_irq(struct gdma_dma_dev *dma_dev,
-+ struct gdma_dmaengine_chan *chan)
-+{
-+ struct gdma_dma_desc *desc;
-+ unsigned long flags;
-+ int chan_issued;
-+
-+ chan_issued = 0;
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ desc = chan->desc;
-+ if (desc) {
-+ if (desc->cyclic) {
-+ vchan_cyclic_callback(&desc->vdesc);
-+ if (chan->next_sg == desc->num_sgs)
-+ chan->next_sg = 0;
-+ chan_issued = 1;
-+ } else {
-+ desc->residue -= desc->sg[chan->next_sg - 1].len;
-+ if (chan->next_sg == desc->num_sgs) {
-+ list_del(&desc->vdesc.node);
-+ vchan_cookie_complete(&desc->vdesc);
-+ chan_issued = gdma_next_desc(chan);
-+ } else
-+ chan_issued = 1;
-+ }
-+ } else
-+ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to complete\n",
-+ chan->id);
-+ if (chan_issued)
-+ set_bit(chan->id, &dma_dev->chan_issued);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+}
-+
-+static irqreturn_t gdma_dma_irq(int irq, void *devid)
-+{
-+ struct gdma_dma_dev *dma_dev = devid;
-+ u32 done, done_reg;
-+ unsigned int i;
-+
-+ done_reg = dma_dev->data->done_int_reg;
-+ done = gdma_dma_read(dma_dev, done_reg);
-+ if (unlikely(!done))
-+ return IRQ_NONE;
-+
-+ /* clean done bits */
-+ gdma_dma_write(dma_dev, done_reg, done);
-+
-+ i = 0;
-+ while (done) {
-+ if (done & 0x1) {
-+ gdma_dma_chan_irq(dma_dev, &dma_dev->chan[i]);
-+ atomic_dec(&dma_dev->cnt);
-+ }
-+ done >>= 1;
-+ i++;
-+ }
-+
-+ /* start only have work to do */
-+ if (dma_dev->chan_issued)
-+ tasklet_schedule(&dma_dev->task);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void gdma_dma_issue_pending(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
-+ if (gdma_next_desc(chan)) {
-+ set_bit(chan->id, &dma_dev->chan_issued);
-+ tasklet_schedule(&dma_dev->task);
-+ } else
-+ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to issue\n",
-+ chan->id);
-+ }
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
-+ struct dma_chan *c, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ struct scatterlist *sg;
-+ unsigned int i;
-+
-+ desc = gdma_dma_alloc_desc(sg_len);
-+ if (!desc) {
-+ dev_err(c->device->dev, "alloc sg decs error\n");
-+ return NULL;
-+ }
-+ desc->residue = 0;
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ if (direction == DMA_MEM_TO_DEV)
-+ desc->sg[i].src_addr = sg_dma_address(sg);
-+ else if (direction == DMA_DEV_TO_MEM)
-+ desc->sg[i].dst_addr = sg_dma_address(sg);
-+ else {
-+ dev_err(c->device->dev, "direction type %d error\n",
-+ direction);
-+ goto free_desc;
-+ }
-+
-+ if (unlikely(sg_dma_len(sg) > GDMA_REG_CTRL0_TX_MASK)) {
-+ dev_err(c->device->dev, "sg len too large %d\n",
-+ sg_dma_len(sg));
-+ goto free_desc;
-+ }
-+ desc->sg[i].len = sg_dma_len(sg);
-+ desc->residue += sg_dma_len(sg);
-+ }
-+
-+ desc->num_sgs = sg_len;
-+ desc->direction = direction;
-+ desc->cyclic = false;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+
-+free_desc:
-+ kfree(desc);
-+ return NULL;
-+}
-+
-+static struct dma_async_tx_descriptor * gdma_dma_prep_dma_memcpy(
-+ struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
-+ size_t len, unsigned long flags)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ unsigned int num_periods, i;
-+ size_t xfer_count;
-+
-+ if (len <= 0)
-+ return NULL;
-+
-+ chan->burst_size = gdma_dma_maxburst(len >> 2);
-+
-+ xfer_count = GDMA_REG_CTRL0_TX_MASK;
-+ num_periods = DIV_ROUND_UP(len, xfer_count);
-+
-+ desc = gdma_dma_alloc_desc(num_periods);
-+ if (!desc) {
-+ dev_err(c->device->dev, "alloc memcpy decs error\n");
-+ return NULL;
-+ }
-+ desc->residue = len;
-+
-+ for (i = 0; i < num_periods; i++) {
-+ desc->sg[i].src_addr = src;
-+ desc->sg[i].dst_addr = dest;
-+ if (len > xfer_count) {
-+ desc->sg[i].len = xfer_count;
-+ } else {
-+ desc->sg[i].len = len;
-+ }
-+ src += desc->sg[i].len;
-+ dest += desc->sg[i].len;
-+ len -= desc->sg[i].len;
-+ }
-+
-+ desc->num_sgs = num_periods;
-+ desc->direction = DMA_MEM_TO_MEM;
-+ desc->cyclic = false;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
-+ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
-+ size_t period_len, enum dma_transfer_direction direction,
-+ unsigned long flags)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ unsigned int num_periods, i;
-+
-+ if (buf_len % period_len)
-+ return NULL;
-+
-+ if (period_len > GDMA_REG_CTRL0_TX_MASK) {
-+ dev_err(c->device->dev, "cyclic len too large %d\n",
-+ period_len);
-+ return NULL;
-+ }
-+
-+ num_periods = buf_len / period_len;
-+ desc = gdma_dma_alloc_desc(num_periods);
-+ if (!desc) {
-+ dev_err(c->device->dev, "alloc cyclic decs error\n");
-+ return NULL;
-+ }
-+ desc->residue = buf_len;
-+
-+ for (i = 0; i < num_periods; i++) {
-+ if (direction == DMA_MEM_TO_DEV)
-+ desc->sg[i].src_addr = buf_addr;
-+ else if (direction == DMA_DEV_TO_MEM)
-+ desc->sg[i].dst_addr = buf_addr;
-+ else {
-+ dev_err(c->device->dev, "direction type %d error\n",
-+ direction);
-+ goto free_desc;
-+ }
-+ desc->sg[i].len = period_len;
-+ buf_addr += period_len;
-+ }
-+
-+ desc->num_sgs = num_periods;
-+ desc->direction = direction;
-+ desc->cyclic = true;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+
-+free_desc:
-+ kfree(desc);
-+ return NULL;
-+}
-+
-+static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie, struct dma_tx_state *state)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct virt_dma_desc *vdesc;
-+ enum dma_status status;
-+ unsigned long flags;
-+ struct gdma_dma_desc *desc;
-+
-+ status = dma_cookie_status(c, cookie, state);
-+ if (status == DMA_COMPLETE || !state)
-+ return status;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ desc = chan->desc;
-+ if (desc && (cookie == desc->vdesc.tx.cookie)) {
-+ /*
-+ * We never update edesc->residue in the cyclic case, so we
-+ * can tell the remaining room to the end of the circular
-+ * buffer.
-+ */
-+ if (desc->cyclic)
-+ state->residue = desc->residue -
-+ ((chan->next_sg - 1) * desc->sg[0].len);
-+ else
-+ state->residue = desc->residue;
-+ } else if ((vdesc = vchan_find_desc(&chan->vchan, cookie)))
-+ state->residue = to_gdma_dma_desc(vdesc)->residue;
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ dev_dbg(c->device->dev, "tx residue %d bytes\n", state->residue);
-+
-+ return status;
-+}
-+
-+static void gdma_dma_free_chan_resources(struct dma_chan *c)
-+{
-+ vchan_free_chan_resources(to_virt_chan(c));
-+}
-+
-+static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
-+{
-+ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
-+}
-+
-+static void gdma_dma_tasklet(unsigned long arg)
-+{
-+ struct gdma_dma_dev *dma_dev = (struct gdma_dma_dev *)arg;
-+ struct gdma_dmaengine_chan *chan;
-+ static unsigned int last_chan;
-+ unsigned int i, chan_mask;
-+
-+ /* record last chan to round robin all chans */
-+ i = last_chan;
-+ chan_mask = dma_dev->data->chancnt - 1;
-+ do {
-+ /*
-+ * on mt7621. when verify with dmatest with all
-+ * channel is enable. we need to limit only two
-+ * channel is working at the same time. otherwise the
-+ * data will have problem.
-+ */
-+ if (atomic_read(&dma_dev->cnt) >= 2) {
-+ last_chan = i;
-+ break;
-+ }
-+
-+ if (test_and_clear_bit(i, &dma_dev->chan_issued)) {
-+ chan = &dma_dev->chan[i];
-+ if (chan->desc) {
-+ atomic_inc(&dma_dev->cnt);
-+ gdma_start_transfer(dma_dev, chan);
-+ } else
-+ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to issue\n", chan->id);
-+
-+ if (!dma_dev->chan_issued)
-+ break;
-+ }
-+
-+ i = (i + 1) & chan_mask;
-+ } while (i != last_chan);
-+}
-+
-+static void rt305x_gdma_init(struct gdma_dma_dev *dma_dev)
-+{
-+ uint32_t gct;
-+
-+ /* all chans round robin */
-+ gdma_dma_write(dma_dev, GDMA_RT305X_GCT, GDMA_REG_GCT_ARBIT_RR);
-+
-+ gct = gdma_dma_read(dma_dev, GDMA_RT305X_GCT);
-+ dev_info(dma_dev->ddev.dev, "revision: %d, channels: %d\n",
-+ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
-+ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) &
-+ GDMA_REG_GCT_CHAN_MASK));
-+}
-+
-+static void rt3883_gdma_init(struct gdma_dma_dev *dma_dev)
-+{
-+ uint32_t gct;
-+
-+ /* all chans round robin */
-+ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
-+
-+ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
-+ dev_info(dma_dev->ddev.dev, "revision: %d, channels: %d\n",
-+ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
-+ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) &
-+ GDMA_REG_GCT_CHAN_MASK));
-+}
-+
-+static struct gdma_data rt305x_gdma_data = {
-+ .chancnt = 8,
-+ .done_int_reg = GDMA_RT305X_STATUS_INT,
-+ .init = rt305x_gdma_init,
-+ .start_transfer = rt305x_gdma_start_transfer,
-+};
-+
-+static struct gdma_data rt3883_gdma_data = {
-+ .chancnt = 16,
-+ .done_int_reg = GDMA_REG_DONE_INT,
-+ .init = rt3883_gdma_init,
-+ .start_transfer = rt3883_gdma_start_transfer,
-+};
-+
-+static const struct of_device_id gdma_of_match_table[] = {
-+ { .compatible = "ralink,rt305x-gdma", .data = &rt305x_gdma_data },
-+ { .compatible = "ralink,rt3883-gdma", .data = &rt3883_gdma_data },
-+ { },
-+};
-+
-+static int gdma_dma_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct gdma_dmaengine_chan *chan;
-+ struct gdma_dma_dev *dma_dev;
-+ struct dma_device *dd;
-+ unsigned int i;
-+ struct resource *res;
-+ int ret;
-+ int irq;
-+ void __iomem *base;
-+ struct gdma_data *data;
-+
-+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-+ if (ret)
-+ return ret;
-+
-+ match = of_match_device(gdma_of_match_table, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+ data = (struct gdma_data *) match->data;
-+
-+ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev) +
-+ (sizeof(struct gdma_dmaengine_chan) * data->chancnt),
-+ GFP_KERNEL);
-+ if (!dma_dev) {
-+ dev_err(&pdev->dev, "alloc dma device failed\n");
-+ return -EINVAL;
-+ }
-+ dma_dev->data = data;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+ dma_dev->base = base;
-+ tasklet_init(&dma_dev->task, gdma_dma_tasklet, (unsigned long)dma_dev);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+ ret = devm_request_irq(&pdev->dev, irq, gdma_dma_irq,
-+ 0, dev_name(&pdev->dev), dma_dev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return ret;
-+ }
-+
-+ device_reset(&pdev->dev);
-+
-+ dd = &dma_dev->ddev;
-+ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
-+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
-+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-+ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
-+ dd->device_prep_dma_memcpy = gdma_dma_prep_dma_memcpy;
-+ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
-+ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
-+ dd->device_config = gdma_dma_config;
-+ dd->device_terminate_all = gdma_dma_terminate_all;
-+ dd->device_tx_status = gdma_dma_tx_status;
-+ dd->device_issue_pending = gdma_dma_issue_pending;
-+
-+ dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
-+ dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
-+ dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
-+ dd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
-+
-+ dd->dev = &pdev->dev;
-+ dd->dev->dma_parms = &dma_dev->dma_parms;
-+ dma_set_max_seg_size(dd->dev, GDMA_REG_CTRL0_TX_MASK);
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ for (i = 0; i < data->chancnt; i++) {
-+ chan = &dma_dev->chan[i];
-+ chan->id = i;
-+ chan->vchan.desc_free = gdma_dma_desc_free;
-+ vchan_init(&chan->vchan, dd);
-+ }
-+
-+ /* init hardware */
-+ data->init(dma_dev);
-+
-+ ret = dma_async_device_register(dd);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register dma device\n");
-+ return ret;
-+ }
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id, dma_dev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register of dma controller\n");
-+ goto err_unregister;
-+ }
-+
-+ platform_set_drvdata(pdev, dma_dev);
-+
-+ return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+ return ret;
-+}
-+
-+static int gdma_dma_remove(struct platform_device *pdev)
-+{
-+ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
-+
-+ tasklet_kill(&dma_dev->task);
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&dma_dev->ddev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gdma_dma_driver = {
-+ .probe = gdma_dma_probe,
-+ .remove = gdma_dma_remove,
-+ .driver = {
-+ .name = "gdma-rt2880",
-+ .of_match_table = gdma_of_match_table,
-+ },
-+};
-+module_platform_driver(gdma_dma_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ralink/MTK DMA driver");
-+MODULE_LICENSE("GPL v2");
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -525,6 +525,7 @@ static inline void dma_set_unmap(struct
- struct dmaengine_unmap_data *
- dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags);
- void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap);
-+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
- #else
- static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
- struct dmaengine_unmap_data *unmap)
---- /dev/null
-+++ b/drivers/dma/mtk-hsdma.c
-@@ -0,0 +1,767 @@
-+/*
-+ * Copyright (C) 2015, Michael Lee <igvtee@gmail.com>
-+ * MTK HSDMA support
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/of_dma.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+
-+#include "virt-dma.h"
-+
-+#define HSDMA_BASE_OFFSET 0x800
-+
-+#define HSDMA_REG_TX_BASE 0x00
-+#define HSDMA_REG_TX_CNT 0x04
-+#define HSDMA_REG_TX_CTX 0x08
-+#define HSDMA_REG_TX_DTX 0x0c
-+#define HSDMA_REG_RX_BASE 0x100
-+#define HSDMA_REG_RX_CNT 0x104
-+#define HSDMA_REG_RX_CRX 0x108
-+#define HSDMA_REG_RX_DRX 0x10c
-+#define HSDMA_REG_INFO 0x200
-+#define HSDMA_REG_GLO_CFG 0x204
-+#define HSDMA_REG_RST_CFG 0x208
-+#define HSDMA_REG_DELAY_INT 0x20c
-+#define HSDMA_REG_FREEQ_THRES 0x210
-+#define HSDMA_REG_INT_STATUS 0x220
-+#define HSDMA_REG_INT_MASK 0x228
-+#define HSDMA_REG_SCH_Q01 0x280
-+#define HSDMA_REG_SCH_Q23 0x284
-+
-+#define HSDMA_DESCS_MAX 0xfff
-+#define HSDMA_DESCS_NUM 8
-+#define HSDMA_DESCS_MASK (HSDMA_DESCS_NUM - 1)
-+#define HSDMA_NEXT_DESC(x) (((x) + 1) & HSDMA_DESCS_MASK)
-+
-+/* HSDMA_REG_INFO */
-+#define HSDMA_INFO_INDEX_MASK 0xf
-+#define HSDMA_INFO_INDEX_SHIFT 24
-+#define HSDMA_INFO_BASE_MASK 0xff
-+#define HSDMA_INFO_BASE_SHIFT 16
-+#define HSDMA_INFO_RX_MASK 0xff
-+#define HSDMA_INFO_RX_SHIFT 8
-+#define HSDMA_INFO_TX_MASK 0xff
-+#define HSDMA_INFO_TX_SHIFT 0
-+
-+/* HSDMA_REG_GLO_CFG */
-+#define HSDMA_GLO_TX_2B_OFFSET BIT(31)
-+#define HSDMA_GLO_CLK_GATE BIT(30)
-+#define HSDMA_GLO_BYTE_SWAP BIT(29)
-+#define HSDMA_GLO_MULTI_DMA BIT(10)
-+#define HSDMA_GLO_TWO_BUF BIT(9)
-+#define HSDMA_GLO_32B_DESC BIT(8)
-+#define HSDMA_GLO_BIG_ENDIAN BIT(7)
-+#define HSDMA_GLO_TX_DONE BIT(6)
-+#define HSDMA_GLO_BT_MASK 0x3
-+#define HSDMA_GLO_BT_SHIFT 4
-+#define HSDMA_GLO_RX_BUSY BIT(3)
-+#define HSDMA_GLO_RX_DMA BIT(2)
-+#define HSDMA_GLO_TX_BUSY BIT(1)
-+#define HSDMA_GLO_TX_DMA BIT(0)
-+
-+#define HSDMA_BT_SIZE_16BYTES (0 << HSDMA_GLO_BT_SHIFT)
-+#define HSDMA_BT_SIZE_32BYTES (1 << HSDMA_GLO_BT_SHIFT)
-+#define HSDMA_BT_SIZE_64BYTES (2 << HSDMA_GLO_BT_SHIFT)
-+#define HSDMA_BT_SIZE_128BYTES (3 << HSDMA_GLO_BT_SHIFT)
-+
-+#define HSDMA_GLO_DEFAULT (HSDMA_GLO_MULTI_DMA | \
-+ HSDMA_GLO_RX_DMA | HSDMA_GLO_TX_DMA | HSDMA_BT_SIZE_32BYTES)
-+
-+/* HSDMA_REG_RST_CFG */
-+#define HSDMA_RST_RX_SHIFT 16
-+#define HSDMA_RST_TX_SHIFT 0
-+
-+/* HSDMA_REG_DELAY_INT */
-+#define HSDMA_DELAY_INT_EN BIT(15)
-+#define HSDMA_DELAY_PEND_OFFSET 8
-+#define HSDMA_DELAY_TIME_OFFSET 0
-+#define HSDMA_DELAY_TX_OFFSET 16
-+#define HSDMA_DELAY_RX_OFFSET 0
-+
-+#define HSDMA_DELAY_INIT(x) (HSDMA_DELAY_INT_EN | \
-+ ((x) << HSDMA_DELAY_PEND_OFFSET))
-+#define HSDMA_DELAY(x) ((HSDMA_DELAY_INIT(x) << \
-+ HSDMA_DELAY_TX_OFFSET) | HSDMA_DELAY_INIT(x))
-+
-+/* HSDMA_REG_INT_STATUS */
-+#define HSDMA_INT_DELAY_RX_COH BIT(31)
-+#define HSDMA_INT_DELAY_RX_INT BIT(30)
-+#define HSDMA_INT_DELAY_TX_COH BIT(29)
-+#define HSDMA_INT_DELAY_TX_INT BIT(28)
-+#define HSDMA_INT_RX_MASK 0x3
-+#define HSDMA_INT_RX_SHIFT 16
-+#define HSDMA_INT_RX_Q0 BIT(16)
-+#define HSDMA_INT_TX_MASK 0xf
-+#define HSDMA_INT_TX_SHIFT 0
-+#define HSDMA_INT_TX_Q0 BIT(0)
-+
-+/* tx/rx dma desc flags */
-+#define HSDMA_PLEN_MASK 0x3fff
-+#define HSDMA_DESC_DONE BIT(31)
-+#define HSDMA_DESC_LS0 BIT(30)
-+#define HSDMA_DESC_PLEN0(_x) (((_x) & HSDMA_PLEN_MASK) << 16)
-+#define HSDMA_DESC_TAG BIT(15)
-+#define HSDMA_DESC_LS1 BIT(14)
-+#define HSDMA_DESC_PLEN1(_x) ((_x) & HSDMA_PLEN_MASK)
-+
-+/* align 4 bytes */
-+#define HSDMA_ALIGN_SIZE 3
-+/* align size 128bytes */
-+#define HSDMA_MAX_PLEN 0x3f80
-+
-+struct hsdma_desc {
-+ u32 addr0;
-+ u32 flags;
-+ u32 addr1;
-+ u32 unused;
-+};
-+
-+struct mtk_hsdma_sg {
-+ dma_addr_t src_addr;
-+ dma_addr_t dst_addr;
-+ u32 len;
-+};
-+
-+struct mtk_hsdma_desc {
-+ struct virt_dma_desc vdesc;
-+ unsigned int num_sgs;
-+ struct mtk_hsdma_sg sg[1];
-+};
-+
-+struct mtk_hsdma_chan {
-+ struct virt_dma_chan vchan;
-+ unsigned int id;
-+ dma_addr_t desc_addr;
-+ int tx_idx;
-+ int rx_idx;
-+ struct hsdma_desc *tx_ring;
-+ struct hsdma_desc *rx_ring;
-+ struct mtk_hsdma_desc *desc;
-+ unsigned int next_sg;
-+};
-+
-+struct mtk_hsdam_engine {
-+ struct dma_device ddev;
-+ struct device_dma_parameters dma_parms;
-+ void __iomem *base;
-+ struct tasklet_struct task;
-+ volatile unsigned long chan_issued;
-+
-+ struct mtk_hsdma_chan chan[1];
-+};
-+
-+static inline struct mtk_hsdam_engine *mtk_hsdma_chan_get_dev(
-+ struct mtk_hsdma_chan *chan)
-+{
-+ return container_of(chan->vchan.chan.device, struct mtk_hsdam_engine,
-+ ddev);
-+}
-+
-+static inline struct mtk_hsdma_chan *to_mtk_hsdma_chan(struct dma_chan *c)
-+{
-+ return container_of(c, struct mtk_hsdma_chan, vchan.chan);
-+}
-+
-+static inline struct mtk_hsdma_desc *to_mtk_hsdma_desc(
-+ struct virt_dma_desc *vdesc)
-+{
-+ return container_of(vdesc, struct mtk_hsdma_desc, vdesc);
-+}
-+
-+static inline u32 mtk_hsdma_read(struct mtk_hsdam_engine *hsdma, u32 reg)
-+{
-+ return readl(hsdma->base + reg);
-+}
-+
-+static inline void mtk_hsdma_write(struct mtk_hsdam_engine *hsdma,
-+ unsigned reg, u32 val)
-+{
-+ writel(val, hsdma->base + reg);
-+}
-+
-+static void mtk_hsdma_reset_chan(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ chan->tx_idx = 0;
-+ chan->rx_idx = HSDMA_DESCS_NUM - 1;
-+
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CTX, chan->tx_idx);
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CRX, chan->rx_idx);
-+
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RST_CFG,
-+ 0x1 << (chan->id + HSDMA_RST_TX_SHIFT));
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RST_CFG,
-+ 0x1 << (chan->id + HSDMA_RST_RX_SHIFT));
-+}
-+
-+static void hsdma_dump_reg(struct mtk_hsdam_engine *hsdma)
-+{
-+ dev_dbg(hsdma->ddev.dev, "tbase %08x, tcnt %08x, " \
-+ "tctx %08x, tdtx: %08x, rbase %08x, " \
-+ "rcnt %08x, rctx %08x, rdtx %08x\n",
-+ mtk_hsdma_read(hsdma, HSDMA_REG_TX_BASE),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_TX_CNT),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_TX_CTX),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_TX_DTX),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_RX_BASE),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_RX_CNT),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_RX_CRX),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_RX_DRX));
-+
-+ dev_dbg(hsdma->ddev.dev, "info %08x, glo %08x, delay %08x, " \
-+ "intr_stat %08x, intr_mask %08x\n",
-+ mtk_hsdma_read(hsdma, HSDMA_REG_INFO),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_GLO_CFG),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_DELAY_INT),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_INT_STATUS),
-+ mtk_hsdma_read(hsdma, HSDMA_REG_INT_MASK));
-+}
-+
-+static void hsdma_dump_desc(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ struct hsdma_desc *tx_desc;
-+ struct hsdma_desc *rx_desc;
-+ int i;
-+
-+ dev_dbg(hsdma->ddev.dev, "tx idx: %d, rx idx: %d\n",
-+ chan->tx_idx, chan->rx_idx);
-+
-+ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
-+ tx_desc = &chan->tx_ring[i];
-+ rx_desc = &chan->rx_ring[i];
-+
-+ dev_dbg(hsdma->ddev.dev, "%d tx addr0: %08x, flags %08x, " \
-+ "tx addr1: %08x, rx addr0 %08x, flags %08x\n",
-+ i, tx_desc->addr0, tx_desc->flags, \
-+ tx_desc->addr1, rx_desc->addr0, rx_desc->flags);
-+ }
-+}
-+
-+static void mtk_hsdma_reset(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ int i;
-+
-+ /* disable dma */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, 0);
-+
-+ /* disable intr */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, 0);
-+
-+ /* init desc value */
-+ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
-+ chan->tx_ring[i].addr0 = 0;
-+ chan->tx_ring[i].flags = HSDMA_DESC_LS0 |
-+ HSDMA_DESC_DONE;
-+ }
-+ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
-+ chan->rx_ring[i].addr0 = 0;
-+ chan->rx_ring[i].flags = 0;
-+ }
-+
-+ /* reset */
-+ mtk_hsdma_reset_chan(hsdma, chan);
-+
-+ /* enable intr */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, HSDMA_INT_RX_Q0);
-+
-+ /* enable dma */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, HSDMA_GLO_DEFAULT);
-+}
-+
-+static int mtk_hsdma_terminate_all(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
-+ struct mtk_hsdam_engine *hsdma = mtk_hsdma_chan_get_dev(chan);
-+ unsigned long timeout;
-+ LIST_HEAD(head);
-+
-+ spin_lock_bh(&chan->vchan.lock);
-+ chan->desc = NULL;
-+ clear_bit(chan->id, &hsdma->chan_issued);
-+ vchan_get_all_descriptors(&chan->vchan, &head);
-+ spin_unlock_bh(&chan->vchan.lock);
-+
-+ vchan_dma_desc_free_list(&chan->vchan, &head);
-+
-+ /* wait dma transfer complete */
-+ timeout = jiffies + msecs_to_jiffies(2000);
-+ while (mtk_hsdma_read(hsdma, HSDMA_REG_GLO_CFG) &
-+ (HSDMA_GLO_RX_BUSY | HSDMA_GLO_TX_BUSY)) {
-+ if (time_after_eq(jiffies, timeout)) {
-+ hsdma_dump_desc(hsdma, chan);
-+ mtk_hsdma_reset(hsdma, chan);
-+ dev_err(hsdma->ddev.dev, "timeout, reset it\n");
-+ break;
-+ }
-+ cpu_relax();
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ dma_addr_t src, dst;
-+ size_t len, tlen;
-+ struct hsdma_desc *tx_desc, *rx_desc;
-+ struct mtk_hsdma_sg *sg;
-+ unsigned int i;
-+ int rx_idx;
-+
-+ sg = &chan->desc->sg[0];
-+ len = sg->len;
-+ chan->desc->num_sgs = DIV_ROUND_UP(len, HSDMA_MAX_PLEN);
-+
-+ /* tx desc */
-+ src = sg->src_addr;
-+ for (i = 0; i < chan->desc->num_sgs; i++) {
-+ if (len > HSDMA_MAX_PLEN)
-+ tlen = HSDMA_MAX_PLEN;
-+ else
-+ tlen = len;
-+
-+ if (i & 0x1) {
-+ tx_desc->addr1 = src;
-+ tx_desc->flags |= HSDMA_DESC_PLEN1(tlen);
-+ } else {
-+ tx_desc = &chan->tx_ring[chan->tx_idx];
-+ tx_desc->addr0 = src;
-+ tx_desc->flags = HSDMA_DESC_PLEN0(tlen);
-+
-+ /* update index */
-+ chan->tx_idx = HSDMA_NEXT_DESC(chan->tx_idx);
-+ }
-+
-+ src += tlen;
-+ len -= tlen;
-+ }
-+ if (i & 0x1)
-+ tx_desc->flags |= HSDMA_DESC_LS0;
-+ else
-+ tx_desc->flags |= HSDMA_DESC_LS1;
-+
-+ /* rx desc */
-+ rx_idx = HSDMA_NEXT_DESC(chan->rx_idx);
-+ len = sg->len;
-+ dst = sg->dst_addr;
-+ for (i = 0; i < chan->desc->num_sgs; i++) {
-+ rx_desc = &chan->rx_ring[rx_idx];
-+ if (len > HSDMA_MAX_PLEN)
-+ tlen = HSDMA_MAX_PLEN;
-+ else
-+ tlen = len;
-+
-+ rx_desc->addr0 = dst;
-+ rx_desc->flags = HSDMA_DESC_PLEN0(tlen);
-+
-+ dst += tlen;
-+ len -= tlen;
-+
-+ /* update index */
-+ rx_idx = HSDMA_NEXT_DESC(rx_idx);
-+ }
-+
-+ /* make sure desc and index all up to date */
-+ wmb();
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CTX, chan->tx_idx);
-+
-+ return 0;
-+}
-+
-+static int gdma_next_desc(struct mtk_hsdma_chan *chan)
-+{
-+ struct virt_dma_desc *vdesc;
-+
-+ vdesc = vchan_next_desc(&chan->vchan);
-+ if (!vdesc) {
-+ chan->desc = NULL;
-+ return 0;
-+ }
-+ chan->desc = to_mtk_hsdma_desc(vdesc);
-+ chan->next_sg = 0;
-+
-+ return 1;
-+}
-+
-+static void mtk_hsdma_chan_done(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ struct mtk_hsdma_desc *desc;
-+ int chan_issued;
-+
-+ chan_issued = 0;
-+ spin_lock_bh(&chan->vchan.lock);
-+ desc = chan->desc;
-+ if (likely(desc)) {
-+ if (chan->next_sg == desc->num_sgs) {
-+ list_del(&desc->vdesc.node);
-+ vchan_cookie_complete(&desc->vdesc);
-+ chan_issued = gdma_next_desc(chan);
-+ }
-+ } else
-+ dev_dbg(hsdma->ddev.dev, "no desc to complete\n");
-+
-+ if (chan_issued)
-+ set_bit(chan->id, &hsdma->chan_issued);
-+ spin_unlock_bh(&chan->vchan.lock);
-+}
-+
-+static irqreturn_t mtk_hsdma_irq(int irq, void *devid)
-+{
-+ struct mtk_hsdam_engine *hsdma = devid;
-+ u32 status;
-+
-+ status = mtk_hsdma_read(hsdma, HSDMA_REG_INT_STATUS);
-+ if (unlikely(!status))
-+ return IRQ_NONE;
-+
-+ if (likely(status & HSDMA_INT_RX_Q0))
-+ tasklet_schedule(&hsdma->task);
-+ else
-+ dev_dbg(hsdma->ddev.dev, "unhandle irq status %08x\n",
-+ status);
-+ /* clean intr bits */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_INT_STATUS, status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void mtk_hsdma_issue_pending(struct dma_chan *c)
-+{
-+ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
-+ struct mtk_hsdam_engine *hsdma = mtk_hsdma_chan_get_dev(chan);
-+
-+ spin_lock_bh(&chan->vchan.lock);
-+ if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
-+ if (gdma_next_desc(chan)) {
-+ set_bit(chan->id, &hsdma->chan_issued);
-+ tasklet_schedule(&hsdma->task);
-+ } else
-+ dev_dbg(hsdma->ddev.dev, "no desc to issue\n");
-+ }
-+ spin_unlock_bh(&chan->vchan.lock);
-+}
-+
-+static struct dma_async_tx_descriptor * mtk_hsdma_prep_dma_memcpy(
-+ struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
-+ size_t len, unsigned long flags)
-+{
-+ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
-+ struct mtk_hsdma_desc *desc;
-+
-+ if (len <= 0)
-+ return NULL;
-+
-+ desc = kzalloc(sizeof(struct mtk_hsdma_desc), GFP_ATOMIC);
-+ if (!desc) {
-+ dev_err(c->device->dev, "alloc memcpy decs error\n");
-+ return NULL;
-+ }
-+
-+ desc->sg[0].src_addr = src;
-+ desc->sg[0].dst_addr = dest;
-+ desc->sg[0].len = len;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static enum dma_status mtk_hsdma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie, struct dma_tx_state *state)
-+{
-+ return dma_cookie_status(c, cookie, state);
-+}
-+
-+static void mtk_hsdma_free_chan_resources(struct dma_chan *c)
-+{
-+ vchan_free_chan_resources(to_virt_chan(c));
-+}
-+
-+static void mtk_hsdma_desc_free(struct virt_dma_desc *vdesc)
-+{
-+ kfree(container_of(vdesc, struct mtk_hsdma_desc, vdesc));
-+}
-+
-+static void mtk_hsdma_tx(struct mtk_hsdam_engine *hsdma)
-+{
-+ struct mtk_hsdma_chan *chan;
-+
-+ if (test_and_clear_bit(0, &hsdma->chan_issued)) {
-+ chan = &hsdma->chan[0];
-+ if (chan->desc) {
-+ mtk_hsdma_start_transfer(hsdma, chan);
-+ } else
-+ dev_dbg(hsdma->ddev.dev,"chan 0 no desc to issue\n");
-+ }
-+}
-+
-+static void mtk_hsdma_rx(struct mtk_hsdam_engine *hsdma)
-+{
-+ struct mtk_hsdma_chan *chan;
-+ int next_idx, drx_idx, cnt;
-+
-+ chan = &hsdma->chan[0];
-+ next_idx = HSDMA_NEXT_DESC(chan->rx_idx);
-+ drx_idx = mtk_hsdma_read(hsdma, HSDMA_REG_RX_DRX);
-+
-+ cnt = (drx_idx - next_idx) & HSDMA_DESCS_MASK;
-+ if (!cnt)
-+ return;
-+
-+ chan->next_sg += cnt;
-+ chan->rx_idx = (chan->rx_idx + cnt) & HSDMA_DESCS_MASK;
-+
-+ /* update rx crx */
-+ wmb();
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CRX, chan->rx_idx);
-+
-+ mtk_hsdma_chan_done(hsdma, chan);
-+}
-+
-+static void mtk_hsdma_tasklet(unsigned long arg)
-+{
-+ struct mtk_hsdam_engine *hsdma = (struct mtk_hsdam_engine *)arg;
-+
-+ mtk_hsdma_rx(hsdma);
-+ mtk_hsdma_tx(hsdma);
-+}
-+
-+static int mtk_hsdam_alloc_desc(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ int i;
-+
-+ chan->tx_ring = dma_alloc_coherent(hsdma->ddev.dev,
-+ 2 * HSDMA_DESCS_NUM * sizeof(*chan->tx_ring),
-+ &chan->desc_addr, GFP_ATOMIC | __GFP_ZERO);
-+ if (!chan->tx_ring)
-+ goto no_mem;
-+
-+ chan->rx_ring = &chan->tx_ring[HSDMA_DESCS_NUM];
-+
-+ /* init tx ring value */
-+ for (i = 0; i < HSDMA_DESCS_NUM; i++)
-+ chan->tx_ring[i].flags = HSDMA_DESC_LS0 | HSDMA_DESC_DONE;
-+
-+ return 0;
-+no_mem:
-+ return -ENOMEM;
-+}
-+
-+static void mtk_hsdam_free_desc(struct mtk_hsdam_engine *hsdma,
-+ struct mtk_hsdma_chan *chan)
-+{
-+ if (chan->tx_ring) {
-+ dma_free_coherent(hsdma->ddev.dev,
-+ 2 * HSDMA_DESCS_NUM * sizeof(*chan->tx_ring),
-+ chan->tx_ring, chan->desc_addr);
-+ chan->tx_ring = NULL;
-+ chan->rx_ring = NULL;
-+ }
-+}
-+
-+static int mtk_hsdma_init(struct mtk_hsdam_engine *hsdma)
-+{
-+ struct mtk_hsdma_chan *chan;
-+ int ret;
-+ u32 reg;
-+
-+ /* init desc */
-+ chan = &hsdma->chan[0];
-+ ret = mtk_hsdam_alloc_desc(hsdma, chan);
-+ if (ret)
-+ return ret;
-+
-+ /* tx */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_BASE, chan->desc_addr);
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CNT, HSDMA_DESCS_NUM);
-+ /* rx */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_BASE, chan->desc_addr +
-+ (sizeof(struct hsdma_desc) * HSDMA_DESCS_NUM));
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CNT, HSDMA_DESCS_NUM);
-+ /* reset */
-+ mtk_hsdma_reset_chan(hsdma, chan);
-+
-+ /* enable rx intr */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, HSDMA_INT_RX_Q0);
-+
-+ /* enable dma */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, HSDMA_GLO_DEFAULT);
-+
-+ /* hardware info */
-+ reg = mtk_hsdma_read(hsdma, HSDMA_REG_INFO);
-+ dev_info(hsdma->ddev.dev, "rx: %d, tx: %d\n",
-+ (reg >> HSDMA_INFO_RX_SHIFT) & HSDMA_INFO_RX_MASK,
-+ (reg >> HSDMA_INFO_TX_SHIFT) & HSDMA_INFO_TX_MASK);
-+
-+ hsdma_dump_reg(hsdma);
-+
-+ return ret;
-+}
-+
-+static void mtk_hsdma_uninit(struct mtk_hsdam_engine *hsdma)
-+{
-+ struct mtk_hsdma_chan *chan;
-+
-+ /* disable dma */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, 0);
-+
-+ /* disable intr */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, 0);
-+
-+ /* free desc */
-+ chan = &hsdma->chan[0];
-+ mtk_hsdam_free_desc(hsdma, chan);
-+
-+ /* tx */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_BASE, 0);
-+ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CNT, 0);
-+ /* rx */
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_BASE, 0);
-+ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CNT, 0);
-+ /* reset */
-+ mtk_hsdma_reset_chan(hsdma, chan);
-+}
-+
-+static const struct of_device_id mtk_hsdma_of_match[] = {
-+ { .compatible = "mediatek,mt7621-hsdma" },
-+ { },
-+};
-+
-+static int mtk_hsdma_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct mtk_hsdma_chan *chan;
-+ struct mtk_hsdam_engine *hsdma;
-+ struct dma_device *dd;
-+ struct resource *res;
-+ int ret;
-+ int irq;
-+ void __iomem *base;
-+
-+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-+ if (ret)
-+ return ret;
-+
-+ match = of_match_device(mtk_hsdma_of_match, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+
-+ hsdma = devm_kzalloc(&pdev->dev, sizeof(*hsdma), GFP_KERNEL);
-+ if (!hsdma) {
-+ dev_err(&pdev->dev, "alloc dma device failed\n");
-+ return -EINVAL;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+ hsdma->base = base + HSDMA_BASE_OFFSET;
-+ tasklet_init(&hsdma->task, mtk_hsdma_tasklet, (unsigned long)hsdma);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+ ret = devm_request_irq(&pdev->dev, irq, mtk_hsdma_irq,
-+ 0, dev_name(&pdev->dev), hsdma);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return ret;
-+ }
-+
-+ device_reset(&pdev->dev);
-+
-+ dd = &hsdma->ddev;
-+ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
-+ dd->copy_align = HSDMA_ALIGN_SIZE;
-+ dd->device_free_chan_resources = mtk_hsdma_free_chan_resources;
-+ dd->device_prep_dma_memcpy = mtk_hsdma_prep_dma_memcpy;
-+ dd->device_terminate_all = mtk_hsdma_terminate_all;
-+ dd->device_tx_status = mtk_hsdma_tx_status;
-+ dd->device_issue_pending = mtk_hsdma_issue_pending;
-+ dd->dev = &pdev->dev;
-+ dd->dev->dma_parms = &hsdma->dma_parms;
-+ dma_set_max_seg_size(dd->dev, HSDMA_MAX_PLEN);
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ chan = &hsdma->chan[0];
-+ chan->id = 0;
-+ chan->vchan.desc_free = mtk_hsdma_desc_free;
-+ vchan_init(&chan->vchan, dd);
-+
-+ /* init hardware */
-+ ret = mtk_hsdma_init(hsdma);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to alloc ring descs\n");
-+ return ret;
-+ }
-+
-+ ret = dma_async_device_register(dd);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register dma device\n");
-+ return ret;
-+ }
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id, hsdma);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register of dma controller\n");
-+ goto err_unregister;
-+ }
-+
-+ platform_set_drvdata(pdev, hsdma);
-+
-+ return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+ return ret;
-+}
-+
-+static int mtk_hsdma_remove(struct platform_device *pdev)
-+{
-+ struct mtk_hsdam_engine *hsdma = platform_get_drvdata(pdev);
-+
-+ mtk_hsdma_uninit(hsdma);
-+
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&hsdma->ddev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_hsdma_driver = {
-+ .probe = mtk_hsdma_probe,
-+ .remove = mtk_hsdma_remove,
-+ .driver = {
-+ .name = "hsdma-mt7621",
-+ .of_match_table = mtk_hsdma_of_match,
-+ },
-+};
-+module_platform_driver(mtk_hsdma_driver);
-+
-+MODULE_AUTHOR("Michael Lee <igvtee@gmail.com>");
-+MODULE_DESCRIPTION("MTK HSDMA driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ramips/patches-4.14/0048-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-4.14/0048-asoc-add-mt7620-support.patch
deleted file mode 100644
index 1834e88538..0000000000
--- a/target/linux/ramips/patches-4.14/0048-asoc-add-mt7620-support.patch
+++ /dev/null
@@ -1,1046 +0,0 @@
-From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:31:47 +0100
-Subject: [PATCH 48/53] asoc: add mt7620 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 +
- sound/soc/Kconfig | 1 +
- sound/soc/Makefile | 1 +
- sound/soc/ralink/Kconfig | 15 ++
- sound/soc/ralink/Makefile | 11 +
- sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
- 7 files changed, 699 insertions(+)
- create mode 100644 sound/soc/ralink/Kconfig
- create mode 100644 sound/soc/ralink/Makefile
- create mode 100644 sound/soc/ralink/mt7620-i2s.c
- create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -15,6 +15,7 @@
- #include <linux/of_fdt.h>
- #include <linux/kernel.h>
- #include <linux/bootmem.h>
-+#include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
-
-@@ -26,6 +27,7 @@
- #include "common.h"
-
- __iomem void *rt_sysc_membase;
-+EXPORT_SYMBOL(rt_sysc_membase);
- __iomem void *rt_memc_membase;
-
- __iomem void *plat_of_remap_node(const char *node)
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -59,6 +59,7 @@ source "sound/soc/mxs/Kconfig"
- source "sound/soc/pxa/Kconfig"
- source "sound/soc/qcom/Kconfig"
- source "sound/soc/rockchip/Kconfig"
-+source "sound/soc/ralink/Kconfig"
- source "sound/soc/samsung/Kconfig"
- source "sound/soc/sh/Kconfig"
- source "sound/soc/sirf/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
- obj-$(CONFIG_SND_SOC) += pxa/
- obj-$(CONFIG_SND_SOC) += qcom/
- obj-$(CONFIG_SND_SOC) += rockchip/
-+obj-$(CONFIG_SND_SOC) += ralink/
- obj-$(CONFIG_SND_SOC) += samsung/
- obj-$(CONFIG_SND_SOC) += sh/
- obj-$(CONFIG_SND_SOC) += sirf/
---- /dev/null
-+++ b/sound/soc/ralink/Kconfig
-@@ -0,0 +1,8 @@
-+config SND_RALINK_SOC_I2S
-+ depends on RALINK && SND_SOC && !SOC_RT288X
-+ select SND_SOC_GENERIC_DMAENGINE_PCM
-+ select REGMAP_MMIO
-+ tristate "SoC Audio (I2S protocol) for Ralink SoC"
-+ help
-+ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
-+ based boards.
---- /dev/null
-+++ b/sound/soc/ralink/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Ralink/MediaTek Platform Support
-+#
-+snd-soc-ralink-i2s-objs := ralink-i2s.o
-+
-+obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
---- /dev/null
-+++ b/sound/soc/ralink/ralink-i2s.c
-@@ -0,0 +1,965 @@
-+/*
-+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/debugfs.h>
-+#include <linux/of_device.h>
-+#include <sound/pcm_params.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define DRV_NAME "ralink-i2s"
-+
-+#define I2S_REG_CFG0 0x00
-+#define I2S_REG_INT_STATUS 0x04
-+#define I2S_REG_INT_EN 0x08
-+#define I2S_REG_FF_STATUS 0x0c
-+#define I2S_REG_WREG 0x10
-+#define I2S_REG_RREG 0x14
-+#define I2S_REG_CFG1 0x18
-+#define I2S_REG_DIVCMP 0x20
-+#define I2S_REG_DIVINT 0x24
-+
-+/* I2S_REG_CFG0 */
-+#define I2S_REG_CFG0_EN BIT(31)
-+#define I2S_REG_CFG0_DMA_EN BIT(30)
-+#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
-+#define I2S_REG_CFG0_TX_EN BIT(24)
-+#define I2S_REG_CFG0_RX_EN BIT(20)
-+#define I2S_REG_CFG0_SLAVE BIT(16)
-+#define I2S_REG_CFG0_RX_THRES 12
-+#define I2S_REG_CFG0_TX_THRES 4
-+#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+/* RT305x */
-+#define I2S_REG_CFG0_CLK_DIS BIT(8)
-+#define I2S_REG_CFG0_TXCH_SWAP BIT(3)
-+#define I2S_REG_CFG0_TXCH1_OFF BIT(2)
-+#define I2S_REG_CFG0_TXCH0_OFF BIT(1)
-+#define I2S_REG_CFG0_SLAVE_EN BIT(0)
-+/* RT3883 */
-+#define I2S_REG_CFG0_RXCH_SWAP BIT(11)
-+#define I2S_REG_CFG0_RXCH1_OFF BIT(10)
-+#define I2S_REG_CFG0_RXCH0_OFF BIT(9)
-+#define I2S_REG_CFG0_WS_INV BIT(0)
-+/* MT7628 */
-+#define I2S_REG_CFG0_FMT_LE BIT(29)
-+#define I2S_REG_CFG0_SYS_BE BIT(28)
-+#define I2S_REG_CFG0_NORM_24 BIT(18)
-+#define I2S_REG_CFG0_DATA_24 BIT(17)
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_REG_INT_RX_FAULT BIT(7)
-+#define I2S_REG_INT_RX_OVRUN BIT(6)
-+#define I2S_REG_INT_RX_UNRUN BIT(5)
-+#define I2S_REG_INT_RX_THRES BIT(4)
-+#define I2S_REG_INT_TX_FAULT BIT(3)
-+#define I2S_REG_INT_TX_OVRUN BIT(2)
-+#define I2S_REG_INT_TX_UNRUN BIT(1)
-+#define I2S_REG_INT_TX_THRES BIT(0)
-+#define I2S_REG_INT_TX_MASK 0xf
-+#define I2S_REG_INT_RX_MASK 0xf0
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf)
-+#define I2S_TX_AVCNT(x) (x & 0xf)
-+/* MT7628 */
-+#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f)
-+#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f)
-+
-+/* I2S_REG_CFG1 */
-+#define I2S_REG_CFG1_LBK BIT(31)
-+#define I2S_REG_CFG1_EXTLBK BIT(30)
-+/* RT3883 */
-+#define I2S_REG_CFG1_LEFT_J BIT(0)
-+#define I2S_REG_CFG1_RIGHT_J BIT(1)
-+#define I2S_REG_CFG1_FMT_MASK 0x3
-+
-+/* I2S_REG_DIVCMP */
-+#define I2S_REG_DIVCMP_CLKEN BIT(31)
-+#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff
-+
-+/* I2S_REG_DIVINT */
-+#define I2S_REG_DIVINT_MASK 0x3ff
-+
-+/* BCLK dividers */
-+#define RALINK_I2S_DIVCMP 0
-+#define RALINK_I2S_DIVINT 1
-+
-+/* FIFO */
-+#define RALINK_I2S_FIFO_SIZE 32
-+
-+/* feature flags */
-+#define RALINK_FLAGS_TXONLY BIT(0)
-+#define RALINK_FLAGS_LEFT_J BIT(1)
-+#define RALINK_FLAGS_RIGHT_J BIT(2)
-+#define RALINK_FLAGS_ENDIAN BIT(3)
-+#define RALINK_FLAGS_24BIT BIT(4)
-+
-+#define RALINK_I2S_INT_EN 0
-+
-+struct ralink_i2s_stats {
-+ u32 dmafault;
-+ u32 overrun;
-+ u32 underrun;
-+ u32 belowthres;
-+};
-+
-+struct ralink_i2s {
-+ struct device *dev;
-+ void __iomem *regs;
-+ struct clk *clk;
-+ struct regmap *regmap;
-+ u32 flags;
-+ unsigned int fmt;
-+ u16 txdma_req;
-+ u16 rxdma_req;
-+
-+ struct snd_dmaengine_dai_dma_data playback_dma_data;
-+ struct snd_dmaengine_dai_dma_data capture_dma_data;
-+
-+ struct dentry *dbg_dir;
-+ struct dentry *dbg_stats;
-+ struct ralink_i2s_stats txstats;
-+ struct ralink_i2s_stats rxstats;
-+};
-+
-+static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
-+{
-+ u32 buf[10];
-+ int ret;
-+
-+ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
-+ buf, ARRAY_SIZE(buf));
-+
-+ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
-+ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
-+ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
-+ buf[0], buf[1], buf[2], buf[3], buf[4],
-+ buf[5], buf[6], buf[8], buf[9]);
-+}
-+
-+static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
-+ int clk_id, unsigned int freq, int dir)
-+{
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned long clk = clk_get_rate(i2s->clk);
-+ int div;
-+ uint32_t data;
-+
-+ /* disable clock at slave mode */
-+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+ SND_SOC_DAIFMT_CBM_CFM) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_CLK_DIS,
-+ I2S_REG_CFG0_CLK_DIS);
-+ return 0;
-+ }
-+
-+ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
-+ div = (clk / rate ) - 1;
-+
-+ data = rt_sysc_r32(0x30);
-+ data &= (0xff << 8);
-+ data |= (0x1 << 15) | (div << 8);
-+ rt_sysc_w32(data, 0x30);
-+
-+ /* enable clock */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
-+
-+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
-+ clk, rate, div);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned long clk = clk_get_rate(i2s->clk);
-+ int divint, divcomp;
-+
-+ /* disable clock at slave mode */
-+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+ SND_SOC_DAIFMT_CBM_CFM) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+ I2S_REG_DIVCMP_CLKEN, 0);
-+ return 0;
-+ }
-+
-+ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
-+ clk = clk / (2 * 2 * width);
-+ divint = clk / rate;
-+ divcomp = ((clk % rate) * 512) / rate;
-+
-+ if ((divint > I2S_REG_DIVINT_MASK) ||
-+ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
-+ return -EINVAL;
-+
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
-+ I2S_REG_DIVINT_MASK, divint);
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
-+
-+ /* enable clock */
-+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
-+ I2S_REG_DIVCMP_CLKEN);
-+
-+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
-+ clk_get_rate(i2s->clk), rate, divint, divcomp);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned int cfg0 = 0, cfg1 = 0;
-+
-+ /* set master/slave audio interface */
-+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+ case SND_SOC_DAIFMT_CBM_CFM:
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ cfg0 |= I2S_REG_CFG0_SLAVE_EN;
-+ else
-+ cfg0 |= I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBS_CFS:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* interface format */
-+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+ case SND_SOC_DAIFMT_I2S:
-+ break;
-+ case SND_SOC_DAIFMT_RIGHT_J:
-+ if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
-+ cfg1 |= I2S_REG_CFG1_RIGHT_J;
-+ break;
-+ }
-+ return -EINVAL;
-+ case SND_SOC_DAIFMT_LEFT_J:
-+ if (i2s->flags & RALINK_FLAGS_LEFT_J) {
-+ cfg1 |= I2S_REG_CFG1_LEFT_J;
-+ break;
-+ }
-+ return -EINVAL;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* clock inversion */
-+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+ case SND_SOC_DAIFMT_NB_NF:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (i2s->flags & RALINK_FLAGS_TXONLY) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SLAVE_EN, cfg0);
-+ } else {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SLAVE, cfg0);
-+ }
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
-+ I2S_REG_CFG1_FMT_MASK, cfg1);
-+ i2s->fmt = fmt;
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ if (dai->active)
-+ return 0;
-+
-+ /* setup status interrupt */
-+#if (RALINK_I2S_INT_EN)
-+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
-+#else
-+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
-+#endif
-+
-+ /* enable */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+ I2S_REG_CFG0_THRES_MASK,
-+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+ I2S_REG_CFG0_DFT_THRES);
-+
-+ return 0;
-+}
-+
-+static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ /* If both streams are stopped, disable module and clock */
-+ if (dai->active)
-+ return;
-+
-+ /*
-+ * datasheet mention when disable all control regs are cleared
-+ * to initial values. need reinit at startup.
-+ */
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
-+}
-+
-+static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ int width;
-+ int ret;
-+
-+ width = params_width(params);
-+ switch (width) {
-+ case 16:
-+ if (i2s->flags & RALINK_FLAGS_24BIT)
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_DATA_24, 0);
-+ break;
-+ case 24:
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_DATA_24,
-+ I2S_REG_CFG0_DATA_24);
-+ break;
-+ }
-+ return -EINVAL;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (params_channels(params)) {
-+ case 2:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+ /* system endian */
-+#ifdef SNDRV_LITTLE_ENDIAN
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SYS_BE, 0);
-+#else
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_SYS_BE,
-+ I2S_REG_CFG0_SYS_BE);
-+#endif
-+
-+ /* data endian */
-+ switch (params_format(params)) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ case SNDRV_PCM_FORMAT_S24_LE:
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_FMT_LE,
-+ I2S_REG_CFG0_FMT_LE);
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ case SNDRV_PCM_FORMAT_S24_BE:
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+ I2S_REG_CFG0_FMT_LE, 0);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* setup bclk rate */
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
-+ else
-+ ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
-+
-+ return ret;
-+}
-+
-+static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ unsigned int mask, val;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ mask = I2S_REG_CFG0_TX_EN;
-+ else
-+ mask = I2S_REG_CFG0_RX_EN;
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ val = mask;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ val = 0;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
-+
-+ return 0;
-+}
-+
-+static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
-+ struct resource *res)
-+{
-+ struct snd_dmaengine_dai_dma_data *dma_data;
-+
-+ /* Playback */
-+ dma_data = &i2s->playback_dma_data;
-+ dma_data->addr = res->start + I2S_REG_WREG;
-+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ dma_data->maxburst = 1;
-+ dma_data->slave_id = i2s->txdma_req;
-+
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ return;
-+
-+ /* Capture */
-+ dma_data = &i2s->capture_dma_data;
-+ dma_data->addr = res->start + I2S_REG_RREG;
-+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ dma_data->maxburst = 1;
-+ dma_data->slave_id = i2s->rxdma_req;
-+}
-+
-+static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
-+{
-+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
-+ &i2s->capture_dma_data);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
-+{
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
-+ .set_sysclk = ralink_i2s_set_sysclk,
-+ .set_fmt = ralink_i2s_set_fmt,
-+ .startup = ralink_i2s_startup,
-+ .shutdown = ralink_i2s_shutdown,
-+ .hw_params = ralink_i2s_hw_params,
-+ .trigger = ralink_i2s_trigger,
-+};
-+
-+static struct snd_soc_dai_driver ralink_i2s_dai = {
-+ .name = DRV_NAME,
-+ .probe = ralink_i2s_dai_probe,
-+ .remove = ralink_i2s_dai_remove,
-+ .ops = &ralink_i2s_dai_ops,
-+ .capture = {
-+ .stream_name = "I2S Capture",
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rate_min = 5512,
-+ .rate_max = 192000,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ },
-+ .playback = {
-+ .stream_name = "I2S Playback",
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rate_min = 5512,
-+ .rate_max = 192000,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ },
-+ .symmetric_rates = 1,
-+};
-+
-+static struct snd_pcm_hardware ralink_pcm_hardware = {
-+ .info = SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID |
-+ SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .period_bytes_min = PAGE_SIZE,
-+ .period_bytes_max = PAGE_SIZE * 2,
-+ .periods_min = 2,
-+ .periods_max = 128,
-+ .buffer_bytes_max = 128 * 1024,
-+ .fifo_size = RALINK_I2S_FIFO_SIZE,
-+};
-+
-+static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
-+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+ .pcm_hardware = &ralink_pcm_hardware,
-+ .prealloc_buffer_size = 256 * PAGE_SIZE,
-+};
-+
-+static const struct snd_soc_component_driver ralink_i2s_component = {
-+ .name = DRV_NAME,
-+};
-+
-+static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
-+{
-+ return true;
-+}
-+
-+static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
-+{
-+ switch (reg) {
-+ case I2S_REG_INT_STATUS:
-+ case I2S_REG_FF_STATUS:
-+ return true;
-+ }
-+ return false;
-+}
-+
-+static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
-+{
-+ switch (reg) {
-+ case I2S_REG_FF_STATUS:
-+ case I2S_REG_RREG:
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static const struct regmap_config ralink_i2s_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .writeable_reg = ralink_i2s_writeable_reg,
-+ .readable_reg = ralink_i2s_readable_reg,
-+ .volatile_reg = ralink_i2s_volatile_reg,
-+ .max_register = I2S_REG_DIVINT,
-+};
-+
-+#if (RALINK_I2S_INT_EN)
-+static irqreturn_t ralink_i2s_irq(int irq, void *devid)
-+{
-+ struct ralink_i2s *i2s = devid;
-+ u32 status;
-+
-+ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
-+ if (unlikely(!status))
-+ return IRQ_NONE;
-+
-+ /* tx stats */
-+ if (status & I2S_REG_INT_TX_MASK) {
-+ if (status & I2S_REG_INT_TX_THRES)
-+ i2s->txstats.belowthres++;
-+ if (status & I2S_REG_INT_TX_UNRUN)
-+ i2s->txstats.underrun++;
-+ if (status & I2S_REG_INT_TX_OVRUN)
-+ i2s->txstats.overrun++;
-+ if (status & I2S_REG_INT_TX_FAULT)
-+ i2s->txstats.dmafault++;
-+ }
-+
-+ /* rx stats */
-+ if (status & I2S_REG_INT_RX_MASK) {
-+ if (status & I2S_REG_INT_RX_THRES)
-+ i2s->rxstats.belowthres++;
-+ if (status & I2S_REG_INT_RX_UNRUN)
-+ i2s->rxstats.underrun++;
-+ if (status & I2S_REG_INT_RX_OVRUN)
-+ i2s->rxstats.overrun++;
-+ if (status & I2S_REG_INT_RX_FAULT)
-+ i2s->rxstats.dmafault++;
-+ }
-+
-+ /* clean status bits */
-+ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+#if IS_ENABLED(CONFIG_DEBUG_FS)
-+static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
-+{
-+ struct ralink_i2s *i2s = s->private;
-+
-+ seq_printf(s, "tx stats\n");
-+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
-+ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
-+ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
-+ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
-+
-+ seq_printf(s, "rx stats\n");
-+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
-+ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
-+ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
-+ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
-+
-+ ralink_i2s_dump_regs(i2s);
-+
-+ return 0;
-+}
-+
-+static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, ralink_i2s_stats_show, inode->i_private);
-+}
-+
-+static const struct file_operations ralink_i2s_stats_ops = {
-+ .open = ralink_i2s_stats_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
-+ if (!i2s->dbg_dir)
-+ return -ENOMEM;
-+
-+ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
-+ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
-+ if (!i2s->dbg_stats) {
-+ debugfs_remove(i2s->dbg_dir);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
-+{
-+ debugfs_remove(i2s->dbg_stats);
-+ debugfs_remove(i2s->dbg_dir);
-+}
-+#else
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+ return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg)
-+{
-+}
-+#endif
-+
-+/*
-+ * TODO: these refclk setup functions should use
-+ * clock framework instead. hardcode it now.
-+ */
-+static void rt3350_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data |= (0x1 << 8);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3883_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x3 << 13);
-+ data |= (0x1 << 13);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3552_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0xf << 8);
-+ data |= (0x3 << 8);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7620_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x7 << 9);
-+ data |= 0x1 << 9;
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7621_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x1f << 18);
-+ data |= (0x19 << 18);
-+ data &= ~(0x1f << 12);
-+ data |= (0x1 << 12);
-+ data &= ~(0x7 << 9);
-+ data |= (0x5 << 9);
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7628_refclk_setup(void)
-+{
-+ uint32_t data;
-+
-+ /* set i2s and refclk digital pad */
-+ data = rt_sysc_r32(0x3c);
-+ data |= 0x1f;
-+ rt_sysc_w32(data, 0x3c);
-+
-+ /* Adjust REFCLK0's driving strength */
-+ data = rt_sysc_r32(0x1354);
-+ data &= ~(0x1 << 5);
-+ rt_sysc_w32(data, 0x1354);
-+ data = rt_sysc_r32(0x1364);
-+ data |= ~(0x1 << 5);
-+ rt_sysc_w32(data, 0x1364);
-+
-+ /* set refclk output 12Mhz clock */
-+ data = rt_sysc_r32(0x2c);
-+ data &= ~(0x7 << 9);
-+ data |= 0x1 << 9;
-+ rt_sysc_w32(data, 0x2c);
-+}
-+
-+struct rt_i2s_data {
-+ u32 flags;
-+ void (*refclk_setup)(void);
-+};
-+
-+struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
-+struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
-+ .refclk_setup = rt3350_refclk_setup };
-+struct rt_i2s_data rt3883_i2s_data = {
-+ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
-+ .refclk_setup = rt3883_refclk_setup };
-+struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
-+struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
-+struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
-+struct rt_i2s_data mt7628_i2s_data = {
-+ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
-+ RALINK_FLAGS_LEFT_J),
-+ .refclk_setup = mt7628_refclk_setup};
-+
-+static const struct of_device_id ralink_i2s_match_table[] = {
-+ { .compatible = "ralink,rt3050-i2s",
-+ .data = (void *)&rt3050_i2s_data },
-+ { .compatible = "ralink,rt3350-i2s",
-+ .data = (void *)&rt3350_i2s_data },
-+ { .compatible = "ralink,rt3883-i2s",
-+ .data = (void *)&rt3883_i2s_data },
-+ { .compatible = "ralink,rt3352-i2s",
-+ .data = (void *)&rt3352_i2s_data },
-+ { .compatible = "mediatek,mt7620-i2s",
-+ .data = (void *)&mt7620_i2s_data },
-+ { .compatible = "mediatek,mt7621-i2s",
-+ .data = (void *)&mt7621_i2s_data },
-+ { .compatible = "mediatek,mt7628-i2s",
-+ .data = (void *)&mt7628_i2s_data },
-+};
-+MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
-+
-+static int ralink_i2s_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct ralink_i2s *i2s;
-+ struct resource *res;
-+ int irq, ret;
-+ u32 dma_req;
-+ struct rt_i2s_data *data;
-+
-+ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
-+ if (!i2s)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, i2s);
-+ i2s->dev = &pdev->dev;
-+
-+ match = of_match_device(ralink_i2s_match_table, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+ data = (struct rt_i2s_data *)match->data;
-+ i2s->flags = data->flags;
-+ /* setup out 12Mhz refclk to codec as mclk */
-+ if (data->refclk_setup)
-+ data->refclk_setup();
-+
-+ if (of_property_read_u32(np, "txdma-req", &dma_req)) {
-+ dev_err(&pdev->dev, "no txdma-req define\n");
-+ return -EINVAL;
-+ }
-+ i2s->txdma_req = (u16)dma_req;
-+ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
-+ if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
-+ dev_err(&pdev->dev, "no rxdma-req define\n");
-+ return -EINVAL;
-+ }
-+ i2s->rxdma_req = (u16)dma_req;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ i2s->regs = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(i2s->regs))
-+ return PTR_ERR(i2s->regs);
-+
-+ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
-+ &ralink_i2s_regmap_config);
-+ if (IS_ERR(i2s->regmap)) {
-+ dev_err(&pdev->dev, "regmap init failed\n");
-+ return PTR_ERR(i2s->regmap);
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+
-+#if (RALINK_I2S_INT_EN)
-+ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
-+ 0, dev_name(&pdev->dev), i2s);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return ret;
-+ }
-+#endif
-+
-+ i2s->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(i2s->clk)) {
-+ dev_err(&pdev->dev, "no clock defined\n");
-+ return PTR_ERR(i2s->clk);
-+ }
-+
-+ ret = clk_prepare_enable(i2s->clk);
-+ if (ret)
-+ return ret;
-+
-+ ralink_i2s_init_dma_data(i2s, res);
-+
-+ device_reset(&pdev->dev);
-+
-+ ret = ralink_i2s_debugfs_create(i2s);
-+ if (ret) {
-+ dev_err(&pdev->dev, "create debugfs failed\n");
-+ goto err_clk_disable;
-+ }
-+
-+ /* enable 24bits support */
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+ }
-+
-+ /* enable big endian support */
-+ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ if (i2s->flags & RALINK_FLAGS_24BIT) {
-+ ralink_i2s_dai.capture.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ ralink_i2s_dai.playback.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ ralink_pcm_hardware.formats |=
-+ SNDRV_PCM_FMTBIT_S24_BE;
-+ }
-+ }
-+
-+ /* disable capture support */
-+ if (i2s->flags & RALINK_FLAGS_TXONLY)
-+ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
-+ 0);
-+
-+ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
-+ &ralink_i2s_dai, 1);
-+ if (ret)
-+ goto err_debugfs;
-+
-+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
-+ &ralink_dmaengine_pcm_config,
-+ SND_DMAENGINE_PCM_FLAG_COMPAT);
-+ if (ret)
-+ goto err_debugfs;
-+
-+ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000);
-+
-+ return 0;
-+
-+err_debugfs:
-+ ralink_i2s_debugfs_remove(i2s);
-+
-+err_clk_disable:
-+ clk_disable_unprepare(i2s->clk);
-+
-+ return ret;
-+}
-+
-+static int ralink_i2s_remove(struct platform_device *pdev)
-+{
-+ struct ralink_i2s *i2s = platform_get_drvdata(pdev);
-+
-+ ralink_i2s_debugfs_remove(i2s);
-+ clk_disable_unprepare(i2s->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ralink_i2s_driver = {
-+ .probe = ralink_i2s_probe,
-+ .remove = ralink_i2s_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .of_match_table = ralink_i2s_match_table,
-+ },
-+};
-+module_platform_driver(ralink_i2s_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch
deleted file mode 100644
index 2ad1f6f9f8..0000000000
--- a/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:31:08 +0100
-Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/serial_core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por
- break;
- }
-
-+ if (tty_termios_baud_rate(termios) == 2500000)
-+ return 250000;
-+
- for (try = 0; try < 2; try++) {
- baud = tty_termios_baud_rate(termios);
-
diff --git a/target/linux/ramips/patches-4.14/0052-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-4.14/0052-pwm-add-mediatek-support.patch
deleted file mode 100644
index 6eb7f16b9d..0000000000
--- a/target/linux/ramips/patches-4.14/0052-pwm-add-mediatek-support.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:16:50 +0100
-Subject: [PATCH 52/53] pwm: add mediatek support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pwm/Kconfig | 9 +++
- drivers/pwm/Makefile | 1 +
- drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 183 insertions(+)
- create mode 100644 drivers/pwm/pwm-mediatek.c
-
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -302,6 +302,15 @@ config PWM_MEDIATEK
- To compile this driver as a module, choose M here: the module
- will be called pwm-mediatek.
-
-+config PWM_MEDIATEK_RAMIPS
-+ tristate "Mediatek PWM support"
-+ depends on RALINK && OF
-+ help
-+ Generic PWM framework driver for Mediatek ARM SoC.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called pwm-mxs.
-+
- config PWM_MXS
- tristate "Freescale MXS PWM support"
- depends on ARCH_MXS && OF
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
- obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
- obj-$(CONFIG_PWM_MESON) += pwm-meson.o
- obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
-+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
- obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
- obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
- obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
---- /dev/null
-+++ b/drivers/pwm/pwm-mediatek-ramips.c
-@@ -0,0 +1,173 @@
-+/*
-+ * Mediatek Pulse Width Modulator driver
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pwm.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#define NUM_PWM 4
-+
-+/* PWM registers and bits definitions */
-+#define PWMCON 0x00
-+#define PWMHDUR 0x04
-+#define PWMLDUR 0x08
-+#define PWMGDUR 0x0c
-+#define PWMWAVENUM 0x28
-+#define PWMDWIDTH 0x2c
-+#define PWMTHRES 0x30
-+
-+/**
-+ * struct mtk_pwm_chip - struct representing pwm chip
-+ *
-+ * @mmio_base: base address of pwm chip
-+ * @chip: linux pwm chip representation
-+ */
-+struct mtk_pwm_chip {
-+ void __iomem *mmio_base;
-+ struct pwm_chip chip;
-+};
-+
-+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mtk_pwm_chip, chip);
-+}
-+
-+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
-+ unsigned long offset)
-+{
-+ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
-+ unsigned int num, unsigned long offset,
-+ unsigned long val)
-+{
-+ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+ int duty_ns, int period_ns)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 resolution = 100 / 4;
-+ u32 clkdiv = 0;
-+
-+ while (period_ns / resolution > 8191) {
-+ clkdiv++;
-+ resolution *= 2;
-+ }
-+
-+ if (clkdiv > 7)
-+ return -1;
-+
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
-+ return 0;
-+}
-+
-+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val |= BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+
-+ return 0;
-+}
-+
-+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val &= ~BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+}
-+
-+static const struct pwm_ops mtk_pwm_ops = {
-+ .config = mtk_pwm_config,
-+ .enable = mtk_pwm_enable,
-+ .disable = mtk_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_pwm_probe(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc;
-+ struct resource *r;
-+ int ret;
-+
-+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-+ if (!pc)
-+ return -ENOMEM;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(pc->mmio_base))
-+ return PTR_ERR(pc->mmio_base);
-+
-+ platform_set_drvdata(pdev, pc);
-+
-+ pc->chip.dev = &pdev->dev;
-+ pc->chip.ops = &mtk_pwm_ops;
-+ pc->chip.base = -1;
-+ pc->chip.npwm = NUM_PWM;
-+
-+ ret = pwmchip_add(&pc->chip);
-+ if (ret < 0)
-+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-+
-+ return ret;
-+}
-+
-+static int mtk_pwm_remove(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < NUM_PWM; i++)
-+ pwm_disable(&pc->chip.pwms[i]);
-+
-+ return pwmchip_remove(&pc->chip);
-+}
-+
-+static const struct of_device_id mtk_pwm_of_match[] = {
-+ { .compatible = "mediatek,mt7628-pwm" },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
-+
-+static struct platform_driver mtk_pwm_driver = {
-+ .driver = {
-+ .name = "mtk-pwm",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mtk_pwm_of_match,
-+ },
-+ .probe = mtk_pwm_probe,
-+ .remove = mtk_pwm_remove,
-+};
-+
-+module_platform_driver(mtk_pwm_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_ALIAS("platform:mtk-pwm");
diff --git a/target/linux/ramips/patches-4.14/0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch b/target/linux/ramips/patches-4.14/0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch
deleted file mode 100644
index aa2fb60a2b..0000000000
--- a/target/linux/ramips/patches-4.14/0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-mtd: spi-nor: add support for switching between 3-byte and 4-byte addressing on w25q256 flash
-
-On some devices the flash chip needs to be in 3-byte addressing mode during
-reboot, otherwise the boot loader will fail to start.
-This mode however does not allow regular reads/writes onto the upper 16M
-half. W25Q256 has separate read commands for reading from >16M, however
-it does not have any separate write commands.
-This patch changes the code to leave the chip in 3-byte mode most of the
-time and only switch during erase/write cycles that go to >16M
-addresses.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -89,6 +89,10 @@ struct flash_info {
- #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
- #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
- #define USE_CLSR BIT(14) /* use CLSR command */
-+#define SPI_NOR_4B_READ_OP BIT(15) /*
-+ * Like SPI_NOR_4B_OPCODES, but for read
-+ * op code only.
-+ */
- };
-
- #define JEDEC_MFR(info) ((info)->id[0])
-@@ -240,6 +244,15 @@ static inline u8 spi_nor_convert_3to4_er
- ARRAY_SIZE(spi_nor_3to4_erase));
- }
-
-+static void spi_nor_set_4byte_read(struct spi_nor *nor,
-+ const struct flash_info *info)
-+{
-+ nor->addr_width = 3;
-+ nor->ext_addr = 0;
-+ nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
-+ nor->flags |= SNOR_F_4B_EXT_ADDR;
-+}
-+
- static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
- const struct flash_info *info)
- {
-@@ -467,6 +480,36 @@ static int spi_nor_erase_sector(struct s
- return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
- }
-
-+static int spi_nor_check_ext_addr(struct spi_nor *nor, u32 addr)
-+{
-+ bool ext_addr;
-+ int ret;
-+ u8 cmd;
-+
-+ if (!(nor->flags & SNOR_F_4B_EXT_ADDR))
-+ return 0;
-+
-+ ext_addr = !!(addr & 0xff000000);
-+ if (nor->ext_addr == ext_addr)
-+ return 0;
-+
-+ cmd = ext_addr ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
-+ write_enable(nor);
-+ ret = nor->write_reg(nor, cmd, NULL, 0);
-+ if (ret)
-+ return ret;
-+
-+ cmd = 0;
-+ ret = nor->write_reg(nor, SPINOR_OP_WREAR, &cmd, 1);
-+ if (ret)
-+ return ret;
-+
-+ nor->addr_width = 3 + ext_addr;
-+ nor->ext_addr = ext_addr;
-+ write_disable(nor);
-+ return 0;
-+}
-+
- /*
- * Erase an address range on the nor chip. The address range may extend
- * one or more erase sectors. Return an error is there is a problem erasing.
-@@ -492,6 +535,10 @@ static int spi_nor_erase(struct mtd_info
- if (ret)
- return ret;
-
-+ ret = spi_nor_check_ext_addr(nor, addr + len);
-+ if (ret)
-+ return ret;
-+
- /* whole-chip erase? */
- if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
- unsigned long timeout;
-@@ -542,6 +589,7 @@ static int spi_nor_erase(struct mtd_info
- write_disable(nor);
-
- erase_err:
-+ spi_nor_check_ext_addr(nor, 0);
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
-
- instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
-@@ -834,7 +882,9 @@ static int spi_nor_lock(struct mtd_info
- if (ret)
- return ret;
-
-+ spi_nor_check_ext_addr(nor, ofs + len);
- ret = nor->flash_lock(nor, ofs, len);
-+ spi_nor_check_ext_addr(nor, 0);
-
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
- return ret;
-@@ -849,7 +899,9 @@ static int spi_nor_unlock(struct mtd_inf
- if (ret)
- return ret;
-
-+ spi_nor_check_ext_addr(nor, ofs + len);
- ret = nor->flash_unlock(nor, ofs, len);
-+ spi_nor_check_ext_addr(nor, 0);
-
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
- return ret;
-@@ -1182,7 +1234,7 @@ static const struct flash_info spi_nor_i
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_READ_OP) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-
-@@ -1245,6 +1297,9 @@ static int spi_nor_read(struct mtd_info
- if (ret)
- return ret;
-
-+ if (nor->flags & SNOR_F_4B_EXT_ADDR)
-+ nor->addr_width = 4;
-+
- while (len) {
- loff_t addr = from;
-
-@@ -1269,6 +1324,18 @@ static int spi_nor_read(struct mtd_info
- ret = 0;
-
- read_err:
-+ if (nor->flags & SNOR_F_4B_EXT_ADDR) {
-+ u8 val = 0;
-+
-+ if ((from + len) & 0xff000000) {
-+ write_enable(nor);
-+ nor->write_reg(nor, SPINOR_OP_WREAR, &val, 1);
-+ write_disable(nor);
-+ }
-+
-+ nor->addr_width = 3;
-+ }
-+
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
- return ret;
- }
-@@ -1370,6 +1437,10 @@ static int spi_nor_write(struct mtd_info
- if (ret)
- return ret;
-
-+ ret = spi_nor_check_ext_addr(nor, to + len);
-+ if (ret < 0)
-+ return ret;
-+
- for (i = 0; i < len; ) {
- ssize_t written;
- loff_t addr = to + i;
-@@ -1410,6 +1481,7 @@ static int spi_nor_write(struct mtd_info
- }
-
- write_err:
-+ spi_nor_check_ext_addr(nor, 0);
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
- return ret;
- }
-@@ -2826,8 +2898,10 @@ int spi_nor_scan(struct spi_nor *nor, co
- } else if (mtd->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
-- if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
-- info->flags & SPI_NOR_4B_OPCODES)
-+ if (info->flags & SPI_NOR_4B_READ_OP)
-+ spi_nor_set_4byte_read(nor, info);
-+ else if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
-+ info->flags & SPI_NOR_4B_OPCODES)
- spi_nor_set_4byte_opcodes(nor, info);
- else
- set_4byte(nor, info, 1);
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -102,6 +102,7 @@
- /* Used for Macronix and Winbond flashes. */
- #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
- #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
-+#define SPINOR_OP_WREAR 0xc5 /* Write extended address register */
-
- /* Used for Spansion flashes only. */
- #define SPINOR_OP_BRWR 0x17 /* Bank register write */
-@@ -229,6 +230,7 @@ enum spi_nor_option_flags {
- SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
- SNOR_F_READY_XSR_RDY = BIT(4),
- SNOR_F_USE_CLSR = BIT(5),
-+ SNOR_F_4B_EXT_ADDR = BIT(6),
- };
-
- /**
-@@ -280,6 +282,7 @@ struct spi_nor {
- enum spi_nor_protocol reg_proto;
- bool sst_write_second;
- u32 flags;
-+ u8 ext_addr;
- u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
-
- int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
diff --git a/target/linux/ramips/patches-4.14/0054-mtd-spi-nor-w25q256-respect-default-mode.patch b/target/linux/ramips/patches-4.14/0054-mtd-spi-nor-w25q256-respect-default-mode.patch
deleted file mode 100644
index a686937989..0000000000
--- a/target/linux/ramips/patches-4.14/0054-mtd-spi-nor-w25q256-respect-default-mode.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -142,20 +142,29 @@ static int read_fsr(struct spi_nor *nor)
- * location. Return the configuration register value.
- * Returns negative if error occurred.
- */
--static int read_cr(struct spi_nor *nor)
-+static int _read_cr(struct spi_nor *nor, u8 reg)
- {
- int ret;
- u8 val;
-
-- ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1);
-+ ret = nor->read_reg(nor, reg, &val, 1);
- if (ret < 0) {
-- dev_err(nor->dev, "error %d reading CR\n", ret);
-+ dev_err(nor->dev, "error %d reading %s\n", ret,
-+ (reg==SPINOR_OP_RDCR)?"CR":"XCR");
- return ret;
- }
-
- return val;
- }
-
-+static inline int read_cr(struct spi_nor *nor) {
-+ return _read_cr(nor, SPINOR_OP_RDCR);
-+}
-+
-+static inline int read_xcr(struct spi_nor *nor) {
-+ return _read_cr(nor, SPINOR_OP_RDXCR);
-+}
-+
- /*
- * Write status register 1 byte
- * Returns negative if error occurred.
-@@ -2898,9 +2907,16 @@ int spi_nor_scan(struct spi_nor *nor, co
- } else if (mtd->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
-- if (info->flags & SPI_NOR_4B_READ_OP)
-- spi_nor_set_4byte_read(nor, info);
-- else if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
-+ if (info->flags & SPI_NOR_4B_READ_OP) {
-+ if (JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
-+ ret = read_xcr(nor);
-+ if (!(ret > 0 && (ret & XCR_DEF_4B_ADDR_MODE)))
-+ spi_nor_set_4byte_read(nor, info);
-+ else
-+ set_4byte(nor, info, 1);
-+ } else
-+ spi_nor_set_4byte_read(nor, info);
-+ } else if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
- info->flags & SPI_NOR_4B_OPCODES)
- spi_nor_set_4byte_opcodes(nor, info);
- else
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -103,6 +103,7 @@
- #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
- #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
- #define SPINOR_OP_WREAR 0xc5 /* Write extended address register */
-+#define SPINOR_OP_RDXCR 0x15 /* Read extended configuration register */
-
- /* Used for Spansion flashes only. */
- #define SPINOR_OP_BRWR 0x17 /* Bank register write */
-@@ -135,6 +136,7 @@
-
- /* Configuration Register bits. */
- #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-+#define XCR_DEF_4B_ADDR_MODE BIT(1) /* Winbond 4B mode default */
-
- /* Status Register 2 bits. */
- #define SR2_QUAD_EN_BIT7 BIT(7)
diff --git a/target/linux/ramips/patches-4.14/0069-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-4.14/0069-awake-rt305x-dwc2-controller.patch
deleted file mode 100644
index e75d19dfce..0000000000
--- a/target/linux/ramips/patches-4.14/0069-awake-rt305x-dwc2-controller.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -407,6 +407,12 @@ static int dwc2_driver_probe(struct plat
- if (retval)
- return retval;
-
-+ /* Enable USB port before any regs access */
-+ if (dwc2_readl(hsotg->regs + PCGCTL) & 0x0f) {
-+ dwc2_writel(0x00, hsotg->regs + PCGCTL);
-+ /* TODO: mdelay(25) here? vendor driver don't use it */
-+ }
-+
- retval = dwc2_get_dr_mode(hsotg);
- if (retval)
- goto error;
diff --git a/target/linux/ramips/patches-4.14/0070-weak_reordering.patch b/target/linux/ramips/patches-4.14/0070-weak_reordering.patch
deleted file mode 100644
index 52e6641324..0000000000
--- a/target/linux/ramips/patches-4.14/0070-weak_reordering.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -58,6 +58,7 @@ choice
- select COMMON_CLK
- select CLKSRC_MIPS_GIC
- select HW_HAS_PCI
-+ select WEAK_REORDERING_BEYOND_LLSC
- endchoice
-
- choice
diff --git a/target/linux/ramips/patches-4.14/0098-disable_cm.patch b/target/linux/ramips/patches-4.14/0098-disable_cm.patch
deleted file mode 100644
index bc00619dff..0000000000
--- a/target/linux/ramips/patches-4.14/0098-disable_cm.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/kernel/mips-cm.c
-+++ b/arch/mips/kernel/mips-cm.c
-@@ -237,6 +237,7 @@ int mips_cm_probe(void)
-
- /* disable CM regions */
- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
-+ /*
- write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
- write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
- write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
-@@ -244,7 +245,7 @@ int mips_cm_probe(void)
- write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
- write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
- write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
--
-+*/
- /* probe for an L2-only sync region */
- mips_cm_probe_l2sync();
-
diff --git a/target/linux/ramips/patches-4.14/0099-pci-mt7620.patch b/target/linux/ramips/patches-4.14/0099-pci-mt7620.patch
deleted file mode 100644
index 997fb6a2b3..0000000000
--- a/target/linux/ramips/patches-4.14/0099-pci-mt7620.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -33,7 +33,6 @@
- #define RALINK_GPIOMODE 0x60
-
- #define PPLL_CFG1 0x9c
--#define PDRV_SW_SET BIT(23)
-
- #define PPLL_DRV 0xa0
- #define PDRV_SW_SET (1<<31)
diff --git a/target/linux/ramips/patches-4.14/0200-linkit_bootstrap.patch b/target/linux/ramips/patches-4.14/0200-linkit_bootstrap.patch
deleted file mode 100644
index cd1462fbcf..0000000000
--- a/target/linux/ramips/patches-4.14/0200-linkit_bootstrap.patch
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_CXL_BASE) += cxl/
- obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
- obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
- obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
-+obj-$(CONFIG_SOC_MT7620) += linkit.o
-
- lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
- lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
---- /dev/null
-+++ b/drivers/misc/linkit.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/gpio.h>
-+
-+#define LINKIT_LATCH_GPIO 11
-+
-+struct linkit_hw_data {
-+ char board[16];
-+ char rev[16];
-+};
-+
-+static void sanify_string(char *s)
-+{
-+ int i;
-+
-+ for (i = 0; i < 15; i++)
-+ if (s[i] <= 0x20)
-+ s[i] = '\0';
-+ s[15] = '\0';
-+}
-+
-+static int linkit_probe(struct platform_device *pdev)
-+{
-+ struct linkit_hw_data hw;
-+ struct mtd_info *mtd;
-+ size_t retlen;
-+ int ret;
-+
-+ mtd = get_mtd_device_nm("factory");
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
-+ put_mtd_device(mtd);
-+
-+ sanify_string(hw.board);
-+ sanify_string(hw.rev);
-+
-+ dev_info(&pdev->dev, "Version : %s\n", hw.board);
-+ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
-+
-+ if (!strcmp(hw.board, "LINKITS7688")) {
-+ dev_info(&pdev->dev, "setting up bootstrap latch\n");
-+
-+ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
-+ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
-+ return -1;
-+ }
-+ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id linkit_match[] = {
-+ { .compatible = "mediatek,linkit" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, linkit_match);
-+
-+static struct platform_driver linkit_driver = {
-+ .probe = linkit_probe,
-+ .driver = {
-+ .name = "mtk-linkit",
-+ .owner = THIS_MODULE,
-+ .of_match_table = linkit_match,
-+ },
-+};
-+
-+int __init linkit_init(void)
-+{
-+ return platform_driver_register(&linkit_driver);
-+}
-+late_initcall_sync(linkit_init);
diff --git a/target/linux/ramips/patches-4.14/100-mt7621-core-detect-hack.patch b/target/linux/ramips/patches-4.14/100-mt7621-core-detect-hack.patch
deleted file mode 100644
index 991e19b6df..0000000000
--- a/target/linux/ramips/patches-4.14/100-mt7621-core-detect-hack.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-There is a variant of MT7621 which contains only one CPU core instead of 2.
-This is not reflected in the config register, so the kernel detects more
-physical cores, which leads to a hang on SMP bringup.
-Add a hack to detect missing cores.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/arch/mips/kernel/smp-cps.c
-+++ b/arch/mips/kernel/smp-cps.c
-@@ -47,6 +47,11 @@ static unsigned core_vpe_count(unsigned
- return mips_cps_numvps(cluster, core);
- }
-
-+bool __weak plat_cpu_core_present(int core)
-+{
-+ return true;
-+}
-+
- static void __init cps_smp_setup(void)
- {
- unsigned int nclusters, ncores, nvpes, core_vpes;
-@@ -64,6 +69,8 @@ static void __init cps_smp_setup(void)
-
- ncores = mips_cps_numcores(cl);
- for (c = 0; c < ncores; c++) {
-+ if (!plat_cpu_core_present(c))
-+ continue;
- core_vpes = core_vpe_count(cl, c);
-
- if (c > 0)
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -15,6 +15,7 @@
- #include <asm/mips-cps.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7621.h>
-+#include <asm/mips-boards/launch.h>
-
- #include <pinmux.h>
-
-@@ -162,6 +163,20 @@ void __init ralink_of_remap(void)
- panic("Failed to remap core resources");
- }
-
-+bool plat_cpu_core_present(int core)
-+{
-+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-+
-+ if (!core)
-+ return true;
-+ launch += core * 2; /* 2 VPEs per core */
-+ if (!(launch->flags & LAUNCH_FREADY))
-+ return false;
-+ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE))
-+ return false;
-+ return true;
-+}
-+
- void prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
diff --git a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch b/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
deleted file mode 100644
index 10edafd412..0000000000
--- a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -9,6 +9,7 @@
-
- #include <linux/kernel.h>
- #include <linux/init.h>
-+#include <linux/jiffies.h>
-
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
-@@ -16,6 +17,7 @@
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7621.h>
- #include <asm/mips-boards/launch.h>
-+#include <asm/delay.h>
-
- #include <pinmux.h>
-
-@@ -177,6 +179,58 @@ bool plat_cpu_core_present(int core)
- return true;
- }
-
-+#define LPS_PREC 8
-+/*
-+* Re-calibration lpj(loop-per-jiffy).
-+* (derived from kernel/calibrate.c)
-+*/
-+static int udelay_recal(void)
-+{
-+ unsigned int i, lpj = 0;
-+ unsigned long ticks, loopbit;
-+ int lps_precision = LPS_PREC;
-+
-+ lpj = (1<<12);
-+
-+ while ((lpj <<= 1) != 0) {
-+ /* wait for "start of" clock tick */
-+ ticks = jiffies;
-+ while (ticks == jiffies)
-+ /* nothing */;
-+
-+ /* Go .. */
-+ ticks = jiffies;
-+ __delay(lpj);
-+ ticks = jiffies - ticks;
-+ if (ticks)
-+ break;
-+ }
-+
-+ /*
-+ * Do a binary approximation to get lpj set to
-+ * equal one clock (up to lps_precision bits)
-+ */
-+ lpj >>= 1;
-+ loopbit = lpj;
-+ while (lps_precision-- && (loopbit >>= 1)) {
-+ lpj |= loopbit;
-+ ticks = jiffies;
-+ while (ticks == jiffies)
-+ /* nothing */;
-+ ticks = jiffies;
-+ __delay(lpj);
-+ if (jiffies != ticks) /* longer than 1 tick */
-+ lpj &= ~loopbit;
-+ }
-+ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj);
-+
-+ for(i=0; i< NR_CPUS; i++)
-+ cpu_data[i].udelay_val = lpj;
-+
-+ return 0;
-+}
-+device_initcall(udelay_recal);
-+
- void prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -59,6 +59,7 @@ choice
- select CLKSRC_MIPS_GIC
- select HW_HAS_PCI
- select WEAK_REORDERING_BEYOND_LLSC
-+ select GENERIC_CLOCKEVENTS_BROADCAST
- endchoice
-
- choice
diff --git a/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
deleted file mode 100644
index e647a2f4c8..0000000000
--- a/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
+++ /dev/null
@@ -1,224 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -19,6 +19,10 @@
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
-+#define SYSC_REG_CLKCFG0 0x2c
-+#define SYSC_REG_CUR_CLK_STS 0x44
-+
-+#define MEMC_REG_CPU_PLL 0x648
-
- #define CHIP_REV_PKG_MASK 0x1
- #define CHIP_REV_PKG_SHIFT 16
-@@ -26,6 +30,22 @@
- #define CHIP_REV_VER_SHIFT 8
- #define CHIP_REV_ECO_MASK 0xf
-
-+#define XTAL_MODE_SEL_MASK 0x7
-+#define XTAL_MODE_SEL_SHIFT 6
-+
-+#define CPU_CLK_SEL_MASK 0x3
-+#define CPU_CLK_SEL_SHIFT 30
-+
-+#define CUR_CPU_FDIV_MASK 0x1f
-+#define CUR_CPU_FDIV_SHIFT 8
-+#define CUR_CPU_FFRAC_MASK 0x1f
-+#define CUR_CPU_FFRAC_SHIFT 0
-+
-+#define CPU_PLL_PREDIV_MASK 0x3
-+#define CPU_PLL_PREDIV_SHIFT 12
-+#define CPU_PLL_FBDIV_MASK 0x7f
-+#define CPU_PLL_FBDIV_SHIFT 4
-+
- #define MT7621_DRAM_BASE 0x0
- #define MT7621_DDR2_SIZE_MIN 32
- #define MT7621_DDR2_SIZE_MAX 256
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -10,6 +10,10 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/jiffies.h>
-+#include <linux/clk.h>
-+#include <linux/clkdev.h>
-+#include <linux/clk-provider.h>
-+#include <dt-bindings/clock/mt7621-clk.h>
-
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
-@@ -18,16 +22,12 @@
- #include <asm/mach-ralink/mt7621.h>
- #include <asm/mips-boards/launch.h>
- #include <asm/delay.h>
-+#include <asm/time.h>
-
- #include <pinmux.h>
-
- #include "common.h"
-
--#define SYSC_REG_SYSCFG 0x10
--#define SYSC_REG_CPLL_CLKCFG0 0x2c
--#define SYSC_REG_CUR_CLK_STS 0x44
--#define CPU_CLK_SEL (BIT(30) | BIT(31))
--
- #define MT7621_GPIO_MODE_UART1 1
- #define MT7621_GPIO_MODE_I2C 2
- #define MT7621_GPIO_MODE_UART3_MASK 0x3
-@@ -113,49 +113,89 @@ static struct rt2880_pmx_group mt7621_pi
- { 0 }
- };
-
-+static struct clk *clks[MT7621_CLK_MAX];
-+static struct clk_onecell_data clk_data = {
-+ .clks = clks,
-+ .clk_num = ARRAY_SIZE(clks),
-+};
-+
- phys_addr_t mips_cpc_default_phys_base(void)
- {
- panic("Cannot detect cpc address");
- }
-
--void __init ralink_clk_init(void)
-+static struct clk *__init mt7621_add_sys_clkdev(
-+ const char *id, unsigned long rate)
- {
-- int cpu_fdiv = 0;
-- int cpu_ffrac = 0;
-- int fbdiv = 0;
-- u32 clk_sts, syscfg;
-- u8 clk_sel = 0, xtal_mode;
-- u32 cpu_clk;
-+ struct clk *clk;
-+ int err;
-+
-+ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+ if (IS_ERR(clk))
-+ panic("failed to allocate %s clock structure", id);
-+
-+ err = clk_register_clkdev(clk, id, NULL);
-+ if (err)
-+ panic("unable to register %s clock device", id);
-
-- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
-- clk_sel = 1;
-+ return clk;
-+}
-+
-+void __init ralink_clk_init(void)
-+{
-+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-+ u32 pll, prediv, fbdiv;
-+ u32 xtal_clk, cpu_clk, bus_clk;
-+ const static u32 prediv_tbl[] = {0, 1, 2, 2};
-+
-+ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-+ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
-+
-+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
-+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
-+
-+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
-+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
-+
-+ if (xtal_sel <= 2)
-+ xtal_clk = 20 * 1000 * 1000;
-+ else if (xtal_sel <= 5)
-+ xtal_clk = 40 * 1000 * 1000;
-+ else
-+ xtal_clk = 25 * 1000 * 1000;
-
- switch (clk_sel) {
- case 0:
-- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
-- cpu_ffrac = (clk_sts & 0x1F);
-- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
-+ cpu_clk = 500 * 1000 * 1000;
- break;
--
- case 1:
-- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
-- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
-- xtal_mode = (syscfg >> 6) & 0x7;
-- if (xtal_mode >= 6) {
-- /* 25Mhz Xtal */
-- cpu_clk = 25 * fbdiv * 1000 * 1000;
-- } else if (xtal_mode >= 3) {
-- /* 40Mhz Xtal */
-- cpu_clk = 40 * fbdiv * 1000 * 1000;
-- } else {
-- /* 20Mhz Xtal */
-- cpu_clk = 20 * fbdiv * 1000 * 1000;
-- }
-+ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
-+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
-+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
-+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
- break;
-+ default:
-+ cpu_clk = xtal_clk;
- }
-+
-+ cpu_clk = cpu_clk / ffiv * ffrac;
-+ bus_clk = cpu_clk / 4;
-+
-+ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
-+ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
-+
-+ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
-+ mips_hpt_frequency = cpu_clk / 2;
- }
-
-+static void __init mt7621_clocks_init_dt(struct device_node *np)
-+{
-+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-+}
-+
-+CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
-+
- void __init ralink_of_remap(void)
- {
- rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
---- a/arch/mips/ralink/timer-gic.c
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -11,14 +11,14 @@
-
- #include <linux/of.h>
- #include <linux/clk-provider.h>
--#include <linux/clocksource.h>
-+#include <asm/time.h>
-
- #include "common.h"
-
- void __init plat_time_init(void)
- {
- ralink_of_remap();
--
-+ ralink_clk_init();
- of_clk_init(NULL);
- timer_probe();
- }
---- /dev/null
-+++ b/include/dt-bindings/clock/mt7621-clk.h
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __DT_BINDINGS_MT7621_CLK_H
-+#define __DT_BINDINGS_MT7621_CLK_H
-+
-+#define MT7621_CLK_CPU 0
-+#define MT7621_CLK_BUS 1
-+
-+#define MT7621_CLK_MAX 2
-+
-+#endif /* __DT_BINDINGS_MT7621_CLK_H */
diff --git a/target/linux/ramips/patches-4.14/105-mt7621-memory-detect.patch b/target/linux/ramips/patches-4.14/105-mt7621-memory-detect.patch
deleted file mode 100644
index b19b57fd66..0000000000
--- a/target/linux/ramips/patches-4.14/105-mt7621-memory-detect.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 10 Jul 2019 00:24:48 +0800
-Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support
-
-mt7621 has the following memory map:
-0x0-0x1c000000: lower 448m memory
-0x1c000000-0x2000000: peripheral registers
-0x20000000-0x2400000: higher 64m memory
-
-detect_memory_region in arch/mips/kernel/setup.c only add the first
-memory region and isn't suitable for 512m memory detection because
-it may accidentally read the memory area for peripheral registers.
-
-This commit adds memory detection capability for mt7621:
-1. add the highmem area when 512m is detected.
-2. guard memcmp from accessing peripheral registers:
- This only happens when some weird user decided to change
- kernel load address to 256m or higher address. Since this
- is a quite unusual case, we just skip 512m testing and return
- 256m as memory size.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++---
- arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++---
- 2 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -46,9 +46,10 @@
- #define CPU_PLL_FBDIV_MASK 0x7f
- #define CPU_PLL_FBDIV_SHIFT 4
-
--#define MT7621_DRAM_BASE 0x0
--#define MT7621_DDR2_SIZE_MIN 32
--#define MT7621_DDR2_SIZE_MAX 256
-+#define MT7621_LOWMEM_BASE 0x0
-+#define MT7621_LOWMEM_MAX_SIZE 0x1C000000
-+#define MT7621_HIGHMEM_BASE 0x20000000
-+#define MT7621_HIGHMEM_SIZE 0x4000000
-
- #define MT7621_CHIP_NAME0 0x3637544D
- #define MT7621_CHIP_NAME1 0x20203132
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -15,6 +15,7 @@
- #include <linux/clk-provider.h>
- #include <dt-bindings/clock/mt7621-clk.h>
-
-+#include <asm/bootinfo.h>
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
- #include <asm/mips-cps.h>
-@@ -57,6 +58,8 @@
- #define MT7621_GPIO_MODE_SDHCI_SHIFT 18
- #define MT7621_GPIO_MODE_SDHCI_GPIO 1
-
-+static void *detect_magic __initdata = detect_memory_region;
-+
- static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
- static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
- static struct rt2880_pmx_func uart3_grp[] = {
-@@ -141,6 +144,28 @@ static struct clk *__init mt7621_add_sys
- return clk;
- }
-
-+void __init mt7621_memory_detect(void)
-+{
-+ void *dm = &detect_magic;
-+ phys_addr_t size;
-+
-+ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
-+ if (!memcmp(dm, dm + size, sizeof(detect_magic)))
-+ break;
-+ }
-+
-+ if ((size == 256 * SZ_1M) &&
-+ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
-+ memcmp(dm, dm + size, sizeof(detect_magic))) {
-+ add_memory_region(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE,
-+ BOOT_MEM_RAM);
-+ add_memory_region(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE,
-+ BOOT_MEM_RAM);
-+ } else {
-+ add_memory_region(MT7621_LOWMEM_BASE, size, BOOT_MEM_RAM);
-+ }
-+}
-+
- void __init ralink_clk_init(void)
- {
- u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-@@ -319,10 +344,7 @@ void prom_soc_init(struct ralink_soc_inf
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
-
-- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
-- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
-- soc_info->mem_base = MT7621_DRAM_BASE;
--
-+ soc_info->mem_detect = mt7621_memory_detect;
- rt2880_pinmux_data = mt7621_pinmux_data;
-
-
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -19,6 +19,7 @@ struct ralink_soc_info {
- unsigned long mem_size;
- unsigned long mem_size_min;
- unsigned long mem_size_max;
-+ void (*mem_detect)(void);
- };
- extern struct ralink_soc_info soc_info;
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -89,6 +89,8 @@ void __init plat_mem_setup(void)
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-+ else if (soc_info.mem_detect)
-+ soc_info.mem_detect();
- else if (soc_info.mem_size)
- add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
- BOOT_MEM_RAM);
diff --git a/target/linux/ramips/patches-4.14/110-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-4.14/110-mt7621-perfctr-fix.patch
deleted file mode 100644
index 4c40e65ab9..0000000000
--- a/target/linux/ramips/patches-4.14/110-mt7621-perfctr-fix.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/ralink/irq-gic.c
-+++ b/arch/mips/ralink/irq-gic.c
-@@ -15,6 +15,12 @@
-
- int get_c0_perfcount_int(void)
- {
-+ /*
-+ * Performance counter events are routed through GIC.
-+ * Prevent them from firing on CPU IRQ7 as well
-+ */
-+ clear_c0_status(IE_SW0 << 7);
-+
- return gic_get_c0_perfcount_int();
- }
- EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
diff --git a/target/linux/ramips/patches-4.14/200-add-ralink-eth.patch b/target/linux/ramips/patches-4.14/200-add-ralink-eth.patch
deleted file mode 100644
index b662fe5e6f..0000000000
--- a/target/linux/ramips/patches-4.14/200-add-ralink-eth.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -159,6 +159,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/qualcomm/Kconfig"
-+source "drivers/net/ethernet/ralink/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -70,6 +70,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
-+obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
diff --git a/target/linux/ramips/patches-4.14/300-mt7620-export-chip-version-and-pkg.patch b/target/linux/ramips/patches-4.14/300-mt7620-export-chip-version-and-pkg.patch
deleted file mode 100644
index 0cb1fede30..0000000000
--- a/target/linux/ramips/patches-4.14/300-mt7620-export-chip-version-and-pkg.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -137,4 +137,16 @@ static inline int mt7620_get_eco(void)
- return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
- }
-
-+static inline int mt7620_get_chipver(void)
-+{
-+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) &
-+ CHIP_REV_VER_MASK;
-+}
-+
-+static inline int mt7620_get_pkg(void)
-+{
-+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) &
-+ CHIP_REV_PKG_MASK;
-+}
-+
- #endif
diff --git a/target/linux/ramips/patches-4.14/302-spi-nor-add-gd25q512.patch b/target/linux/ramips/patches-4.14/302-spi-nor-add-gd25q512.patch
deleted file mode 100644
index 0a3a65d70a..0000000000
--- a/target/linux/ramips/patches-4.14/302-spi-nor-add-gd25q512.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1066,6 +1066,11 @@ static const struct flash_info spi_nor_i
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
-+ {
-+ "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES)
-+ },
-
- /* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
diff --git a/target/linux/ramips/patches-4.14/304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch b/target/linux/ramips/patches-4.14/304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
deleted file mode 100644
index 8b59a106e1..0000000000
--- a/target/linux/ramips/patches-4.14/304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-This hack can be dropped after the next stable release from
-v5.x-tree.
-
-The problem was fixed upstream by
-
-commit 2bffa65da43e ("mtd: spi-nor: Add a post BFPT fixup for MX25L25635E")
-
-For reference see:
-<https://github.com/openwrt/openwrt/pull/1743>
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1103,6 +1103,7 @@ static const struct flash_info spi_nor_i
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-@@ -1275,11 +1276,12 @@ static const struct flash_info spi_nor_i
- { },
- };
-
--static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
-+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor,
-+ const char *name)
- {
- int tmp;
- u8 id[SPI_NOR_MAX_ID_LEN];
-- const struct flash_info *info;
-+ const struct flash_info *info, *first_match = NULL;
-
- tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
- if (tmp < 0) {
-@@ -1290,10 +1292,16 @@ static const struct flash_info *spi_nor_
- for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- info = &spi_nor_ids[tmp];
- if (info->id_len) {
-- if (!memcmp(info->id, id, info->id_len))
-- return &spi_nor_ids[tmp];
-+ if (!memcmp(info->id, id, info->id_len)) {
-+ if (!name || !strcmp(name, info->name))
-+ return info;
-+ if (!first_match)
-+ first_match = info;
-+ }
- }
- }
-+ if (first_match)
-+ return first_match;
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- id[0], id[1], id[2]);
- return ERR_PTR(-ENODEV);
-@@ -2773,7 +2781,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- info = spi_nor_match_id(name);
- /* Try to auto-detect if chip name wasn't specified or not found */
- if (!info)
-- info = spi_nor_read_id(nor);
-+ info = spi_nor_read_id(nor, NULL);
- if (IS_ERR_OR_NULL(info))
- return -ENOENT;
-
-@@ -2784,7 +2792,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- if (name && info->id_len) {
- const struct flash_info *jinfo;
-
-- jinfo = spi_nor_read_id(nor);
-+ jinfo = spi_nor_read_id(nor, name);
- if (IS_ERR(jinfo)) {
- return PTR_ERR(jinfo);
- } else if (jinfo != info) {
diff --git a/target/linux/ramips/patches-4.14/999-fix-pci-init-mt7620.patch b/target/linux/ramips/patches-4.14/999-fix-pci-init-mt7620.patch
deleted file mode 100644
index 3310a6bdba..0000000000
--- a/target/linux/ramips/patches-4.14/999-fix-pci-init-mt7620.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -35,6 +35,7 @@
- #define PPLL_CFG1 0x9c
-
- #define PPLL_DRV 0xa0
-+#define PPLL_LD (1<<23)
- #define PDRV_SW_SET (1<<31)
- #define LC_CKDRVPD (1<<19)
- #define LC_CKDRVOHZ (1<<18)
-@@ -242,8 +243,8 @@ static int mt7620_pci_hw_init(struct pla
- rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
- mdelay(100);
-
-- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
-- dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
-+ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
-+ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n");
- reset_control_assert(rstpcie0);
- rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- return -1;
diff --git a/target/linux/ramips/rt288x/config-4.14 b/target/linux/ramips/rt288x/config-4.14
deleted file mode 100644
index 30c0a64cf8..0000000000
--- a/target/linux/ramips/rt288x/config-4.14
+++ /dev/null
@@ -1,220 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT2880_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT2880=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-CONFIG_SOC_RT288X=y
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB=m
-CONFIG_USB_COMMON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/rt305x/config-4.14 b/target/linux/ramips/rt305x/config-4.14
deleted file mode 100644
index a826bad38e..0000000000
--- a/target/linux/ramips/rt305x/config-4.14
+++ /dev/null
@@ -1,195 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT305X_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_ESW_RT3050=y
-CONFIG_NET_RALINK_RT3050=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-CONFIG_SOC_RT305X=y
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/rt3883/config-4.14 b/target/linux/ramips/rt3883/config-4.14
deleted file mode 100644
index 83b9fdb6f3..0000000000
--- a/target/linux/ramips/rt3883/config-4.14
+++ /dev/null
@@ -1,222 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT3883_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RALINK=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT3883=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-CONFIG_SOC_RT3883=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y