diff options
8 files changed, 336 insertions, 11 deletions
diff --git a/package/boot/uboot-envtools/files/ipq806x b/package/boot/uboot-envtools/files/ipq806x index 222d801f17..7e1d71a7e9 100644 --- a/package/boot/uboot-envtools/files/ipq806x +++ b/package/boot/uboot-envtools/files/ipq806x @@ -30,6 +30,9 @@ ubootenv_mtdinfo () { } case "$board" in +askey,rt4230w-rev6) + ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x40000" "0x20000" + ;; edgecore,ecw5410) ubootenv_add_uci_config "/dev/mtd11" "0x0" "0x10000" "0x10000" ;; diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index abdab89857..22d607b0ec 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ board_config_update board=$(board_name) case "$board" in +askey,rt4230w-rev6 |\ asrock,g10 |\ nec,wg2600hp) ucidef_add_switch "switch0" \ diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index fca35516ec..5592590d52 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -9,6 +9,7 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in + askey,rt4230w-rev6 |\ asrock,g10) if [ -b "$(find_mtd_part 0:art)" ]; then caldata_extract "0:art" 0x1000 0x2f20 @@ -68,6 +69,7 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in + askey,rt4230w-rev6 |\ asrock,g10) if [ -b "$(find_mtd_part 0:art)" ]; then caldata_extract "0:art" 0x5000 0x2f20 diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index 4dc612492c..a5e18201df 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -10,15 +10,7 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in - asrock,g10) - asrock_upgrade_prepare - nand_do_upgrade "$1" - ;; - buffalo,wxr-2533dhp) - buffalo_upgrade_prepare_ubi - CI_ROOTPART="ubi_rootfs" - nand_do_upgrade "$1" - ;; + askey,rt4230w-rev6 |\ compex,wpq864|\ netgear,d7800 |\ netgear,r7500 |\ @@ -28,6 +20,15 @@ platform_do_upgrade() { qcom,ipq8064-ap161) nand_do_upgrade "$1" ;; + asrock,g10) + asrock_upgrade_prepare + nand_do_upgrade "$1" + ;; + buffalo,wxr-2533dhp) + buffalo_upgrade_prepare_ubi + CI_ROOTPART="ubi_rootfs" + nand_do_upgrade "$1" + ;; edgecore,ecw5410) part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')" if [ "$part" = "rootfs1" ]; then diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts new file mode 100644 index 0000000000..7342de4bec --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq8065.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Askey RT4230W REV6"; + compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + aliases { + led-boot = &ledctrl3; + led-failsafe = &ledctrl1; + led-running = &ledctrl2; + led-upgrade = &ledctrl3; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + ledctrl1: ledctrl1 { + label = "ledctrl1"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + ledctrl2: ledctrl2 { + label = "ledctrl2"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + ledctrl3: ledctrl3 { + label = "ledctrl3"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio54", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio22", "gpio23", "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; + input-disable; + }; + }; +}; + +&nand_controller { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + partition@180000 { + label = "0:SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + partition@2c0000 { + label = "0:SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + partition@540000 { + label = "0:DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + partition@660000 { + label = "0:SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + partition@780000 { + label = "0:TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + partition@a00000 { + label = "0:RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + partition@c80000 { + label = "0:APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + partition@1180000 { + label = "0:APPSBLENV"; + reg = <0x1180000 0x0080000>; + }; + ART: partition@1200000 { + label = "0:ART"; + reg = <0x1200000 0x0140000>; + read-only; + }; + partition@1340000 { + label = "0:BOOTCONFIG"; + reg = <0x1340000 0x0060000>; + read-only; + }; + partition@13a0000 { + label = "0:SBL2_1"; + reg = <0x13a0000 0x0140000>; + read-only; + }; + partition@14e0000 { + label = "0:SBL3_1"; + reg = <0x14e0000 0x0280000>; + read-only; + }; + partition@1760000 { + label = "0:DDRCONFIG_1"; + reg = <0x1760000 0x0120000>; + read-only; + }; + partition@1880000 { + label = "0:SSD_1"; + reg = <0x1880000 0x0120000>; + read-only; + }; + partition@19a0000 { + label = "0:TZ_1"; + reg = <0x19a0000 0x0280000>; + read-only; + }; + partition@1c20000 { + label = "0:RPM_1"; + reg = <0x1c20000 0x0280000>; + read-only; + }; + partition@1ea0000 { + label = "0:BOOTCONFIG1"; + reg = <0x1ea0000 0x0060000>; + read-only; + }; + partition@1f00000 { + label = "0:APPSBL_1"; + reg = <0x1f00000 0x0500000>; + read-only; + }; + partition@2400000 { + label = "ubi"; + reg = <0x2400000 0x1a000000>; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00050 0xcf02cf02 /* LED_CTRL_0 */ + 0x00054 0xc832c832 /* LED_CTRL_1 */ + >; + }; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <0>; + + mtd-mac-address = <&ART 0x0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <1>; + + mtd-mac-address = <&ART 0x6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; + clocks = <&gcc USB30_1_MASTER_CLK>; +}; + +&usb3_1 { + status = "okay"; + clocks = <&gcc USB30_0_MASTER_CLK>; +}; + +&pcie0 { + status = "okay"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; + /delete-property/ perst-gpios; +}; + +&pcie1 { + status = "okay"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; + /delete-property/ perst-gpios; + force_gen1 = <1>; +}; diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 6c091be335..e53fba1e1d 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -90,6 +90,19 @@ define Device/ZyXELImage IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata endef +define Device/askey_rt4230w-rev6 + $(call Device/LegacyImage) + DEVICE_VENDOR := Askey + DEVICE_MODEL := RT4230W + DEVICE_VARIANT := REV6 + SOC := qcom-ipq8065 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct + KERNEL_IN_UBI := 1 +endef +TARGET_DEVICES += askey_rt4230w-rev6 + define Device/asrock_g10 $(call Device/FitImage) $(call Device/UbiFit) diff --git a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch index a8e17afd42..87d6b65694 100644 --- a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -907,8 +907,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -907,8 +907,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ @@ -32,6 +32,7 @@ Signed-off-by: John Crispin <john@phrozen.org> + qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ ++ qcom-ipq8065-rt4230w-rev6.dtb \ + qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch index 055a4cbc30..b97d36fd7c 100644 --- a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -842,7 +842,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -842,7 +842,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ @@ -31,6 +31,7 @@ Signed-off-by: John Crispin <john@phrozen.org> + qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ ++ qcom-ipq8065-rt4230w-rev6.dtb \ + qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ |