diff options
11 files changed, 202 insertions, 202 deletions
diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b3b8886720..272c084c99 100644 --- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -26,8 +26,8 @@ ath9k_eeprom_extract() { ath9k_ubi_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev=$(nand_find_ubi $CI_UBIPART) local ubi @@ -40,11 +40,11 @@ ath9k_ubi_eeprom_extract() { } ath9k_patch_firmware_mac() { - local mac=$1 + local mac=$1 - [ -z "$mac" ] && return + [ -z "$mac" ] && return - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 } board=$(board_name) @@ -56,9 +56,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 20480 4096 + ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000 else - ath9k_eeprom_extract "wifi_data" 20480 4096 + ath9k_eeprom_extract "wifi_data" 0x5000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc) fi ;; @@ -74,9 +74,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 4096 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000 else - ath9k_eeprom_extract "wifi_data" 4096 4096 + ath9k_eeprom_extract "wifi_data" 0x1000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0) fi ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3924202d8e..8fe57c87cc 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -26,8 +26,8 @@ ath9k_eeprom_extract() { ath9k_ubi_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev=$(nand_find_ubi $CI_UBIPART) local ubi @@ -42,7 +42,7 @@ ath9k_ubi_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -72,43 +72,43 @@ case "$FIRMWARE" in case $board in c-55|\ c-60) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; fritz4020|\ fritz450e) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "odm-caldata" 4096 2048 + ath9k_eeprom_extract "odm-caldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1) ;; r6100 | \ wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_eeprom_extract "caldata" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0) ;; rambutan) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wlr8100) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr") ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "origcaldata" 4096 2048 + ath9k_eeprom_extract "origcaldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; @@ -121,34 +121,34 @@ case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in c-55) - ath9k_eeprom_extract "art" 20480 2048 + ath9k_eeprom_extract "art" 0x5000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 20480 2048 + ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800 else - ath9k_eeprom_extract "odm-caldata" 20480 2048 + ath9k_eeprom_extract "odm-caldata" 0x5000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_eeprom_extract "caldata" 0x5000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc) ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 86016 4096 + ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000 else - ath9k_eeprom_extract "origcaldata" 86016 4096 + ath9k_eeprom_extract "origcaldata" 0x15000 0x1000 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; @@ -164,9 +164,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 36864 2048 + ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800 else - ath9k_eeprom_extract "odm-caldata" 36864 2048 + ath9k_eeprom_extract "odm-caldata" 0x9000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a3d4770b32..2ba8de4783 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -7,8 +7,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -16,8 +16,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd cal_size mtd=$(find_mtd_chardev $part) @@ -57,17 +57,17 @@ case "$FIRMWARE" in mr1750|\ mr1750v2|\ om5p-acv2) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; archer-c25-v1|\ tl-wdr6500-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; archer-c7-v4|\ archer-c7-v5) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e355ac-v1|\ @@ -81,60 +81,60 @@ case "$FIRMWARE" in oolite-v5.2-dev|\ sr3200|\ xd3200) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; dap-2695-a1) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a) ;; dir-869-a1|\ qihoo-c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) ;; dw33d) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12) ;; epg5000|\ esr1750) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; gl-ar750s|\ gl-ar750|\ tl-wpa8630) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; koala) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0) ;; mc-mac1200r) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; r6100) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) ;; rb-952ui-5ac2nd|\ rb-wapg-5hact2hnd) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; re355|\ re450|\ tl-wr902ac-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; unifiac-lite|\ unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; wi2a-ac200i) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ;; esac ;; @@ -142,26 +142,26 @@ case "$FIRMWARE" in case $board in archer-c5|\ archer-c7) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; nbg6616|\ nbg6716) - ath10kcal_extract "RFdata" 20480 2116 + ath10kcal_extract "RFdata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; om5p-ac) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; rb-911g-5hpacd|\ rb-921gs-5hpacd-r2|\ rb-922uags-5hpacd|\ rb-962uigs-5hact2hnt) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; wlr8100) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; esac @@ -174,18 +174,18 @@ case "$FIRMWARE" in archer-c60-v1|\ cf-e355ac-v2|\ cf-e375ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; archer-c60-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e385ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ;; esac ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b4c1e1d26d..f183bc5720 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -27,7 +27,7 @@ ath9k_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -59,8 +59,8 @@ xor() { ath9k_patch_fw_mac() { local mac=$1 - local mac_offset=$2 - local chksum_offset=$3 + local mac_offset=$(($2)) + local chksum_offset=$(($3)) local xor_mac local xor_fw_mac local xor_fw_chksum @@ -98,12 +98,12 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz4020) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ @@ -111,28 +111,28 @@ case "$FIRMWARE" in dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; engenius,ecb1750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2 ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2 ;; nec,wg800hp) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2 ;; qihoo,c301) - ath9k_eeprom_extract "radiocfg" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "radiocfg" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -142,28 +142,28 @@ case "$FIRMWARE" in "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in avm,fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,whr-g301n|\ buffalo,wzr-hp-g302h-a1a0|\ tplink,tl-wr841-v5|\ tplink,tl-wr941-v4) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h) - ath9k_eeprom_extract "art" 4096 1088 + ath9k_eeprom_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ tplink,tl-wdr3600-v1|\ tplink,tl-wdr4300-v1|\ tplink,tl-wdr4900-v2|\ winchannel,wb2000) - ath9k_eeprom_extract "art" 20480 1088 + ath9k_eeprom_extract "art" 0x5000 0x440 ;; netgear,wnr612-v2|\ on,n150r|\ @@ -181,21 +181,21 @@ case "$FIRMWARE" in ubnt,bullet-m|\ ubnt,nano-m|\ ubnt,rocket-m) - ath9k_eeprom_extract "art" 4096 4096 + ath9k_eeprom_extract "art" 0x1000 0x1000 ;; pqi,air-pen) - ath9k_eeprom_extract "art" 4096 2002 + ath9k_eeprom_extract "art" 0x1000 0x7d2 ;; ubnt,unifi) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wd,mynet-n750) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2 ;; wd,mynet-wifi-rangeextender) - ath9k_eeprom_extract "art" 4096 4096 - ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2 + ath9k_eeprom_extract "art" 0x1000 0x1000 + ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -208,11 +208,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 4096 3768 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524 + ath9k_eeprom_extract "caldata" 0x1000 0xeb8 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -225,11 +225,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 20480 3768 + ath9k_eeprom_extract "art" 0x5000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 20480 3768 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524 + ath9k_eeprom_extract "caldata" 0x5000 0xeb8 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index be2b6f1891..421fb7d66c 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,8 +25,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -34,8 +34,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -90,7 +90,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -98,53 +98,53 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750s) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -152,29 +152,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -185,7 +185,7 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; esac ;; @@ -195,18 +195,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 20480 12064 + ath10kcal_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -216,7 +216,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index fe31ed323d..305d5feda5 100644 --- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -8,8 +8,8 @@ rt2x00_eeprom_die() { rt2x00_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_part $part) @@ -30,11 +30,11 @@ case "$FIRMWARE" in "rt2x00.eeprom" ) case $board in hg556a_c) - rt2x00_eeprom_extract "cal_data" 130560 512 + rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200 ;; hg622 |\ hg655b) - rt2x00_eeprom_extract "cal_data" 0 512 + rt2x00_eeprom_extract "cal_data" 0x0 0x200 ;; *) rt2x00_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a09678ca95..456017e30b 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -37,8 +37,8 @@ ath10kcal_extract() { ath10kcal_ubi_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev local ubi @@ -97,8 +97,8 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in meraki,mr33) - ath10kcal_ubi_extract "ART" 36864 2116 - ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116 + ath10kcal_ubi_extract "ART" 0x9000 0x844 + ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) ;; esac @@ -106,7 +106,7 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case "$board" in asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 36864 12064 + ath10kcal_ubi_extract "Factory" 0x9000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; @@ -115,12 +115,12 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; linksys,ea8300) - ath10kcal_extract "ART" 36864 12064 + ath10kcal_extract "ART" 0x9000 0x2f20 # OEM assigns 4 sequential MACs ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4)) ;; openmesh,a62) - ath10kcal_extract "0:ART" 36864 12064 + ath10kcal_extract "0:ART" 0x9000 0x2f20 ;; esac ;; @@ -131,14 +131,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -154,29 +154,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) ;; linksys,ea8300) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 4096 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064 + ath10kcal_ubi_extract "ART" 0x1000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; esac @@ -188,14 +188,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -211,29 +211,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) ;; linksys,ea8300) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 20480 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064 + ath10kcal_ubi_extract "ART" 0x5000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; esac diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4f21d4a4ef..bdc36070f2 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -32,8 +32,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -80,33 +80,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e) ;; linksys,ea8500) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) ;; nec,wg2600hp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1) ;; tplink,c2600) - ath10kcal_extract "radio" 4096 12064 + ath10kcal_extract "radio" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1) ;; tplink,vr2600v) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) ;; esac @@ -114,33 +114,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18) ;; linksys,ea8500) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) ;; nec,wg2600hp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2) ;; tplink,c2600) - ath10kcal_extract "radio" 20480 12064 + ath10kcal_extract "radio" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8) ;; tplink,vr2600v) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ;; esac diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index aec963a721..82f6885221 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -30,7 +30,7 @@ ath9k_eeprom_die() { ath9k_eeprom_extract_raw() { local source=$1 - local offset=$2 + local offset=$(($2)) local swap=$3 local size=4096 local bs=1 @@ -50,7 +50,7 @@ ath9k_eeprom_extract_raw() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -102,8 +102,8 @@ ath9k_patch_fw_mac_crc() { ath9k_patch_fw_mac() { local mac=$1 - local mac_offset=$2 - local chksum_offset=$3 + local mac_offset=$(($2)) + local chksum_offset=$(($3)) local xor_mac local xor_fw_mac local xor_fw_chksum @@ -135,40 +135,40 @@ case "$FIRMWARE" in case "$board" in arcadyan,arv7518pw) - ath9k_eeprom_extract "boardconfig" 1024 1 + ath9k_eeprom_extract "boardconfig" 0x400 1 ;; arcadyan,arv8539pw22) - ath9k_eeprom_extract "art" 1024 1 + ath9k_eeprom_extract "art" 0x400 1 ;; bt,homehub-v2b) - ath9k_eeprom_extract "art" 0 1 - ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 524 + ath9k_eeprom_extract "art" 0x0 1 + ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 0x20c ;; bt,homehub-v3a) - ath9k_eeprom_extract "art-copy" 0 1 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268 + ath9k_eeprom_extract "art-copy" 0x0 1 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c ;; bt,homehub-v5a) - ath9k_ubi_eeprom_extract "caldata" 4096 0 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 268 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c ;; netgear,dgn3500|netgear,dgn3500b) - ath9k_eeprom_extract "calibration" 61440 0 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 + ath9k_eeprom_extract "calibration" 0xf000 0 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c ;; avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz7362sl) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; avm,fritz7312|avm,fritz7320|avm,fritz7360sl) - ath9k_eeprom_extract "urlader" 2437 0 + ath9k_eeprom_extract "urlader" 0x985 0 ;; avm,fritz7412) /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") ;; tplink,tdw8970|tplink,tdw8980) - ath9k_eeprom_extract "boardconfig" 135168 0 + ath9k_eeprom_extract "boardconfig" 0x21000 0 ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b02c891cbf..dc66226d7b 100644 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -9,8 +9,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -43,7 +43,7 @@ case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_eeprom_extract "caldata" 0x1000 0x800 tpl_set_wireless_mac 0 ;; *) @@ -55,7 +55,7 @@ case "$FIRMWARE" in "pci_wmac1.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_eeprom_extract "caldata" 0x5000 0x800 tpl_set_wireless_mac -1 ;; *) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 6e68f7603d..7b98936ec3 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -7,8 +7,8 @@ rt2x00_eeprom_die() { rt2x00_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_part $part) @@ -68,7 +68,7 @@ case "$FIRMWARE" in ;; dovado,tiny-ac) wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR) - rt2x00_eeprom_extract "factory" 0 512 + rt2x00_eeprom_extract "factory" 0x0 0x200 rt2x00_eeprom_set_macaddr $wifi_mac ;; *) |