diff options
6 files changed, 63 insertions, 5 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 85a0342a60..aafced98db 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -27,6 +27,7 @@ librerouter,librerouter-v1|\ netgear,ex6400|\ netgear,ex7300|\ netgear,wndr4300-v2|\ +netgear,wndr4500-v3|\ netgear,wnr1000-v2|\ netgear,wnr2000-v3|\ netgear,wnr2200-8m|\ diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts b/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts new file mode 100644 index 0000000000..95e30ea84b --- /dev/null +++ b/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "qca9563_netgear_wndr.dtsi" + +/ { + compatible = "netgear,wndr4500-v3", "qca,qca9563"; + model = "Netgear WNDR4500 v3"; +}; + +&leds { + usb1_green { + label = "netgear:green:usb1"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + usb2_green { + label = "netgear:green:usb2"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index d5213523e4..f6929cd88e 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -165,6 +165,17 @@ define Device/netgear_wndr4300-v2 endef TARGET_DEVICES += netgear_wndr4300-v2 +define Device/netgear_wndr4500-v3 + SOC := qca9563 + DEVICE_MODEL := WNDR4500 + DEVICE_VARIANT := v3 + NETGEAR_KERNEL_MAGIC := 0x27051956 + NETGEAR_BOARD_ID := WNDR4500series + NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173 + $(Device/netgear_ath79_nand) +endef +TARGET_DEVICES += netgear_wndr4500-v3 + define Device/zyxel_nbg6716 SOC := qca9558 DEVICE_VENDOR := ZyXEL diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds index 0376b7cfc6..d9989ec538 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds @@ -14,7 +14,8 @@ glinet,gl-ar300m-nor) ;; netgear,wndr3700-v4|\ netgear,wndr4300|\ -netgear,wndr4300-v2) +netgear,wndr4300-v2|\ +netgear,wndr4500-v3) ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20" ;; esac diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network index 135a06d44b..bd02a4b383 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network @@ -18,7 +18,8 @@ ath79_setup_interfaces() ;; netgear,wndr3700-v4|\ netgear,wndr4300|\ - netgear,wndr4300-v2) + netgear,wndr4300-v2|\ + netgear,wndr4500-v3) ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; @@ -39,7 +40,8 @@ ath79_setup_macs() case "$board" in netgear,wndr3700-v4|\ netgear,wndr4300|\ - netgear,wndr4300-v2) + netgear,wndr4300-v2|\ + netgear,wndr4500-v3) wan_mac=$(mtd_get_mac_binary caldata 0x6) ;; zyxel,nbg6716) diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 7ee291d109..d2f8bae1ca 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -11,7 +11,8 @@ case "$FIRMWARE" in case $board in netgear,wndr3700-v4|\ netgear,wndr4300|\ - netgear,wndr4300-v2) + netgear,wndr4300-v2|\ + netgear,wndr4500-v3) caldata_extract "caldata" 0x1000 0x440 ;; zyxel,nbg6716) @@ -27,7 +28,8 @@ case "$FIRMWARE" in case $board in netgear,wndr3700-v4|\ netgear,wndr4300|\ - netgear,wndr4300-v2) + netgear,wndr4300-v2|\ + netgear,wndr4500-v3) caldata_extract "caldata" 0x5000 0x440 ;; *) |