diff options
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl838x.dtsi | 129 | ||||
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl930x.dtsi | 147 |
2 files changed, 147 insertions, 129 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi index 1751c57e28..f5903ec174 100644 --- a/target/linux/realtek/dts-5.10/rtl838x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi @@ -75,78 +75,87 @@ interrupt-controller; }; - intc: rtlintc { - compatible = "realtek,rtl-intc"; - reg = <0xb8003000 0x20>; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - interrupt-map = - <31 &cpuintc 2>, /* UART0 */ - <30 &cpuintc 1>, /* UART1 */ - <29 &cpuintc 5>, /* TC0 */ - <28 &cpuintc 1>, /* TC1 */ - <27 &cpuintc 1>, /* OCPTO */ - <26 &cpuintc 1>, /* HLXTO */ - <25 &cpuintc 1>, /* SLXTO */ - <24 &cpuintc 4>, /* NIC */ - <23 &cpuintc 4>, /* GPIO_ABCD */ - <22 &cpuintc 4>, /* GPIO_EFGH */ - <21 &cpuintc 4>, /* RTC */ - <20 &cpuintc 3>, /* SWCORE */ - <19 &cpuintc 4>, /* WDT_IP1 */ - <18 &cpuintc 5>; /* WDT_IP2 */ - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000000 0x10000>; + + intc: rtlintc@3000 { + compatible = "realtek,rtl-intc"; + reg = <0x3000 0x20>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map = + <31 &cpuintc 2>, /* UART0 */ + <30 &cpuintc 1>, /* UART1 */ + <29 &cpuintc 5>, /* TC0 */ + <28 &cpuintc 1>, /* TC1 */ + <27 &cpuintc 1>, /* OCPTO */ + <26 &cpuintc 1>, /* HLXTO */ + <25 &cpuintc 1>, /* SLXTO */ + <24 &cpuintc 4>, /* NIC */ + <23 &cpuintc 4>, /* GPIO_ABCD */ + <22 &cpuintc 4>, /* GPIO_EFGH */ + <21 &cpuintc 4>, /* RTC */ + <20 &cpuintc 3>, /* SWCORE */ + <19 &cpuintc 4>, /* WDT_IP1 */ + <18 &cpuintc 5>; /* WDT_IP2 */ + }; - spi0: spi@b8001200 { - compatible = "realtek,rtl8380-spi"; - reg = <0xb8001200 0x100>; + spi0: spi@1200 { + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; - #address-cells = <1>; - #size-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <0>; + }; - uart0: uart@b8002000 { - compatible = "ns16550a"; - reg = <0xb8002000 0x100>; + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; - clock-frequency = <200000000>; + clock-frequency = <200000000>; - interrupt-parent = <&intc>; - interrupts = <31>; + interrupt-parent = <&intc>; + interrupts = <31>; - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; - uart1: uart@b8002100 { - pinctrl-names = "default"; - pinctrl-0 = <&enable_uart1>; + uart1: uart@2100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; - compatible = "ns16550a"; - reg = <0xb8002100 0x100>; + compatible = "ns16550a"; + reg = <0x2100 0x100>; - clock-frequency = <200000000>; + clock-frequency = <200000000>; - interrupt-parent = <&intc>; - interrupts = <30>; + interrupt-parent = <&intc>; + interrupts = <30>; - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; - gpio0: gpio-controller@b8003500 { - compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; - reg = <0xb8003500 0x20>; - gpio-controller; - #gpio-cells = <2>; - ngpios = <24>; - interrupt-parent = <&intc>; - interrupts = <23>; + status = "disabled"; + }; + + gpio0: gpio-controller@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x20>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-parent = <&intc>; + interrupts = <23>; + }; }; gpio1: rtl8231-gpio { diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi index c0cb53af08..d01307a35d 100644 --- a/target/linux/realtek/dts-5.10/rtl930x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi @@ -80,26 +80,6 @@ interrupt-controller; }; - intc: rtlintc { - compatible = "realtek,rtl-intc"; - reg = <0xb8003000 0x20>; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - interrupt-map = - <31 &cpuintc 1>, /* UART1 */ - <30 &cpuintc 2>, /* UART0 */ - <28 &cpuintc 1>, /* USB_H2 */ - <24 &cpuintc 4>, /* NIC */ - <23 &cpuintc 3>, /* SWCORE */ - <13 &cpuintc 4>, /* GPIO_ABCD */ - <11 &cpuintc 1>, /* TC4 */ - <10 &cpuintc 1>, /* TC3 */ - <9 &cpuintc 1>, /* TC2 */ - <8 &cpuintc 1>, /* TC1 */ - <7 &cpuintc 5>; /* TC0 */ - }; - osc: oscillator { compatible = "fixed-clock"; #clock-cells = <1>; @@ -107,67 +87,96 @@ clock-output-names = "osc"; }; - timer: timer@b8003200 { - compatible = "realtek,rtl9300-timer"; - reg = <0xb8003200 0x60>; - interrupt-parent = <&intc>; - interrupts = <8>; - interrupt-names = "ostimer"; - clocks = <&osc 0>; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000000 0x10000>; + + intc: rtlintc@3000 { + compatible = "realtek,rtl-intc"; + reg = <0x3000 0x20>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map = + <31 &cpuintc 1>, /* UART1 */ + <30 &cpuintc 2>, /* UART0 */ + <28 &cpuintc 1>, /* USB_H2 */ + <24 &cpuintc 4>, /* NIC */ + <23 &cpuintc 3>, /* SWCORE */ + <13 &cpuintc 4>, /* GPIO_ABCD */ + <11 &cpuintc 1>, /* TC4 */ + <10 &cpuintc 1>, /* TC3 */ + <9 &cpuintc 1>, /* TC2 */ + <8 &cpuintc 1>, /* TC1 */ + <7 &cpuintc 5>; /* TC0 */ + }; - spi0: spi@b8001200 { - compatible = "realtek,rtl8380-spi"; - reg = <0xb8001200 0x100>; + timer: timer@3200 { + compatible = "realtek,rtl9300-timer"; + reg = <0x3200 0x60>; + interrupt-parent = <&intc>; + interrupts = <8>; + interrupt-names = "ostimer"; + clocks = <&osc 0>; + }; - #address-cells = <1>; - #size-cells = <0>; - }; + spi0: spi@1200 { + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; - uart0: uart@b8002000 { - compatible = "ns16550a"; - reg = <0xb8002000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + }; - clock-frequency = <175000000>; + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; - interrupt-parent = <&intc>; - interrupts = <30>; + clock-frequency = <175000000>; - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; + interrupt-parent = <&intc>; + interrupts = <30>; - uart1: uart@b8002100 { - compatible = "ns16550a"; - reg = <0xb8002100 0x100>; + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; - clock-frequency = <175000000>; + uart1: uart@2100 { + compatible = "ns16550a"; + reg = <0x2100 0x100>; - interrupt-parent = <&intc>; - interrupts = <31>; + clock-frequency = <175000000>; - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; + interrupt-parent = <&intc>; + interrupts = <31>; - gpio0: gpio-controller@b8003500 { - compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; - reg = <0xb8003500 0x20>; - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - interrupt-parent = <&intc>; - interrupts = <31>; + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; - /* - * currently, RTL930x GPIO is not supported in - * upstreamed driver (gpio-realtek-otto) - */ - status = "disabled"; + status = "disabled"; + }; + + gpio0: gpio-controller@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x20>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-parent = <&intc>; + interrupts = <31>; + + /* + * currently, RTL930x GPIO is not supported in + * upstreamed driver (gpio-realtek-otto) + */ + status = "disabled"; + }; }; ethernet0: ethernet@bb00a300 { |