aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch485
-rw-r--r--target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch2
-rw-r--r--target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch2
3 files changed, 2 insertions, 487 deletions
diff --git a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
deleted file mode 100644
index 52caee7b40..0000000000
--- a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
+++ /dev/null
@@ -1,485 +0,0 @@
-From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Tue, 17 Mar 2020 21:28:01 +0100
-Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board
-
-This patch adds dts for the Check Point L-50 from 600/1100 series
-routers.
-
-Specification:
--CPU: Marvell Kirkwood 88F6821 1200MHz
--RAM: 512MB
--Flash: NAND 512MB
--WiFi: mPCIe card based on Atheros AR9287 b/g/n
--WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
--LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3))
--USB: 2x USB2.0
--Express card slot
--SD card slot
--Serial console: RJ-45 115200 8n1
--Unsupported DSL
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
-Changes in v3:
-- fix typo and code style issues pointed by OpenWrt guys
-Changes in v2:
-- none
-
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++
- 2 files changed, 439 insertions(+)
- create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-iomega_ix2_200.dtb \
- kirkwood-is2.dtb \
- kirkwood-km_kirkwood.dtb \
-+ kirkwood-l-50.dtb \
- kirkwood-laplug.dtb \
- kirkwood-linkstation-lsqvl.dtb \
- kirkwood-linkstation-lsvl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
-@@ -0,0 +1,438 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Check Point L-50 Board Description
-+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Check Point L-50";
-+ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x20000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8";
-+ stdout-path = &uart0;
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
-+ pinctrl-names = "default";
-+
-+ pmx_sysrst: pmx-sysrst {
-+ marvell,pins = "mpp6";
-+ marvell,function = "sysrst";
-+ };
-+
-+ pmx_button29: pmx_button29 {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led38: pmx_led38 {
-+ marvell,pins = "mpp38";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_sdio_cd: pmx-sdio-cd {
-+ marvell,pins = "mpp46";
-+ marvell,function = "gpio";
-+ };
-+ };
-+
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ mvsdio@90000 {
-+ status = "okay";
-+ cd-gpios = <&gpio1 14 9>;
-+ };
-+
-+ i2c@11000 {
-+ status = "okay";
-+ clock-frequency = <400000>;
-+
-+ gpio2: gpio-expander@20{
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ compatible = "semtech,sx1505q";
-+ reg = <0x20>;
-+
-+ gpio-controller;
-+ };
-+
-+ /* Three GPIOs from 0x21 exp. are undescribed in dts:
-+ * 1: DSL module reset (active low)
-+ * 5: mPCIE reset (active low)
-+ * 6: Express card reset (active low)
-+ */
-+ gpio3: gpio-expander@21{
-+ #gpio-cells = <2>;
-+ #interrupt-cells = <2>;
-+ compatible = "semtech,sx1505q";
-+ reg = <0x21>;
-+
-+ gpio-controller;
-+ };
-+
-+ rtc@30 {
-+ compatible = "s35390a";
-+ reg = <0x30>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status_green {
-+ label = "l-50:green:status";
-+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ status_red {
-+ label = "l-50:red:status";
-+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wifi {
-+ label = "l-50:green:wifi";
-+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "phy0tpt";
-+ };
-+
-+ internet_green {
-+ label = "l-50:green:internet";
-+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ internet_red {
-+ label = "l-50:red:internet";
-+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb1_green {
-+ label = "l-50:green:usb1";
-+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "usbport";
-+ trigger-sources = <&hub_port3>;
-+ };
-+
-+ usb1_red {
-+ label = "l-50:red:usb1";
-+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb2_green {
-+ label = "l-50:green:usb2";
-+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "usbport";
-+ trigger-sources = <&hub_port1>;
-+ };
-+
-+ usb2_red {
-+ label = "l-50:red:usb2";
-+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ usb2_pwr {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb2_pwr";
-+
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
-+ regulator-always-on;
-+ };
-+
-+ usb1_pwr {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1_pwr";
-+
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-+ regulator-always-on;
-+ };
-+
-+ mpcie_pwr {
-+ compatible = "regulator-fixed";
-+ regulator-name = "mpcie_pwr";
-+
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-always-on;
-+ };
-+
-+ express_card_pwr {
-+ compatible = "regulator-fixed";
-+ regulator-name = "express_card_pwr";
-+
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-always-on;
-+ };
-+
-+ keys {
-+ compatible = "gpio-keys";
-+
-+ factory_defaults {
-+ label = "factory_defaults";
-+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy8: ethernet-phy@8 {
-+ reg = <0x08>;
-+ };
-+
-+ switch0: switch@10 {
-+ compatible = "marvell,mv88e6085";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x10>;
-+ dsa,member = <0 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan5";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan6";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan2";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "lan7";
-+ };
-+
-+ switch0port5: port@5 {
-+ reg = <5>;
-+ phy-mode = "rgmii-txid";
-+ link = <&switch1port5>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ phy-mode = "rgmii-id";
-+ ethernet = <&eth1port>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+ };
-+
-+ switch@11 {
-+ compatible = "marvell,mv88e6085";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x11>;
-+ dsa,member = <0 1>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan3";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan8";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan4";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "dmz";
-+ };
-+
-+ switch1port5: port@5 {
-+ reg = <5>;
-+ phy-mode = "rgmii-txid";
-+ link = <&switch0port5>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "dsl";
-+ fixed-link {
-+ speed = <100>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy8>;
-+ };
-+};
-+
-+&eth1 {
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+ pinctrl-0 = <&pmx_nand>;
-+ pinctrl-names = "default";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x00000000 0x000c0000>;
-+ };
-+
-+ partition@a0000 {
-+ label = "bootldr-env";
-+ reg = <0x000c0000 0x00040000>;
-+ };
-+
-+ partition@100000 {
-+ label = "kernel-1";
-+ reg = <0x00100000 0x00800000>;
-+ };
-+
-+ partition@900000 {
-+ label = "rootfs-1";
-+ reg = <0x00900000 0x07100000>;
-+ };
-+
-+ partition@7a00000 {
-+ label = "kernel-2";
-+ reg = <0x07a00000 0x00800000>;
-+ };
-+
-+ partition@8200000 {
-+ label = "rootfs-2";
-+ reg = <0x08200000 0x07100000>;
-+ };
-+
-+ partition@f300000 {
-+ label = "default_sw";
-+ reg = <0x0f300000 0x07900000>;
-+ };
-+
-+ partition@16c00000 {
-+ label = "logs";
-+ reg = <0x16c00000 0x01800000>;
-+ };
-+
-+ partition@18400000 {
-+ label = "preset_cfg";
-+ reg = <0x18400000 0x00100000>;
-+ };
-+
-+ partition@18500000 {
-+ label = "adsl";
-+ reg = <0x18500000 0x00100000>;
-+ };
-+
-+ partition@18600000 {
-+ label = "storage";
-+ reg = <0x18600000 0x07a00000>;
-+ };
-+};
-+
-+&rtc {
-+ status = "disabled";
-+};
-+
-+&pciec {
-+ status = "okay";
-+};
-+
-+&pcie0 {
-+ status = "okay";
-+};
-+
-+&sata_phy0 {
-+ status = "disabled";
-+};
-+
-+&sata_phy1 {
-+ status = "disabled";
-+};
-+
-+&usb0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ port@1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+
-+ hub_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ hub_port3: port@3 {
-+ reg = <3>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
index c1645367a4..35db065727 100644
--- a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
+++ b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -119,6 +119,7 @@ config MACH_DOVE
+@@ -116,6 +116,7 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
diff --git a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
index b7e7f50271..18c03efa8f 100644
--- a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
+++ b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
@@ -41,7 +41,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
parts[i].name = partname;
if (of_get_property(pp, "read-only", &len))
-@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
+@@ -218,6 +227,18 @@ static int __init ofpart_parser_init(voi
return 0;
}