diff options
7 files changed, 3446 insertions, 0 deletions
diff --git a/target/linux/imx6/config-3.14 b/target/linux/imx6/config-3.14 new file mode 100644 index 0000000000..de717ec238 --- /dev/null +++ b/target/linux/imx6/config-3.14 @@ -0,0 +1,366 @@ +CONFIG_AHCI_IMX=y +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_ARCH_HAS_OPP=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_GIC=y +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_NR_BANKS=8 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATA=y +CONFIG_ATAGS=y +# CONFIG_ATA_SFF is not set +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_GENERIC_CPUFREQ_CPU0=n +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_IMX_UART_PORT=1 +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FEC=y +CONFIG_FRAME_POINTER=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_MXC=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HAMRADIO is not set +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IMX_ANATOP=y +CONFIG_HAVE_IMX_GPC=y +CONFIG_HAVE_IMX_MMDC=y +CONFIG_HAVE_IMX_SRC=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_IMX=y +CONFIG_IMX2_WDT=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y +# CONFIG_IMX_WEIM is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_KTIME_SCALAR=y +# CONFIG_LEDS_REGULATOR is not set +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_MACH_EUKREA_CPUIMX51SD is not set +# CONFIG_MACH_IMX51_DT is not set +# CONFIG_MACH_MX51_BABBAGE is not set +CONFIG_MDIO_BOARDINFO=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +# CONFIG_MLX5_CORE is not set +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_MXC is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_SM_COMMON is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_MX3_IPU is not set +# CONFIG_MXC_DEBUG_BOARD is not set +CONFIG_MXS_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_IMX6=y +CONFIG_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX=y +CONFIG_PINCTRL_IMX6Q=y +CONFIG_PINCTRL_IMX6SL=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PM_OPP=y +CONFIG_PPS=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_RATIONAL=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RD_BZIP2=y +CONFIG_RD_GZIP=y +CONFIG_RD_LZO=y +CONFIG_RD_XZ=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_ANATOP=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_PFUZE100=y +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_RFKILL_REGULATOR is not set +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_IMXDI is not set +# CONFIG_RTC_DRV_MXC is not set +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SOC_BUS=y +# CONFIG_SOC_IMX50 is not set +# CONFIG_SOC_IMX53 is not set +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +# CONFIG_SOC_VF610 is not set +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_IMX=y +CONFIG_SPI_MASTER=y +CONFIG_STMP_DEVICE=y +CONFIG_STOP_MACHINE=y +CONFIG_SWIOTLB=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_USB_MXS_PHY is not set +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_3G is not set +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +# CONFIG_ZBUD is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch b/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch new file mode 100644 index 0000000000..babd544af8 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch @@ -0,0 +1,31 @@ +From 1759b172f78263de7077a2743e11f3b718682849 Mon Sep 17 00:00:00 2001 +From: Tim Harvey <tharvey@gateworks.com> +Date: Tue, 22 Oct 2013 21:51:27 -0700 +Subject: [PATCH 1/3] ARM: dts: disable flexcan by default + +Typically nodes are disabled by default and enabled when needed. + +Signed-off-by: Tim Harvey <tharvey@gateworks.com> +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +--- + arch/arm/boot/dts/imx6qdl.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/boot/dts/imx6qdl.dtsi ++++ b/arch/arm/boot/dts/imx6qdl.dtsi +@@ -331,6 +331,7 @@ + interrupts = <0 110 0x04>; + clocks = <&clks 108>, <&clks 109>; + clock-names = "ipg", "per"; ++ status = "disabled"; + }; + + can2: flexcan@02094000 { +@@ -339,6 +340,7 @@ + interrupts = <0 111 0x04>; + clocks = <&clks 110>, <&clks 111>; + clock-names = "ipg", "per"; ++ status = "disabled"; + }; + + gpt: gpt@02098000 { diff --git a/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch b/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch new file mode 100644 index 0000000000..f2d7f6ca17 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch @@ -0,0 +1,115 @@ +From 925467009cc6d92edb02b9e68710db022cd56f41 Mon Sep 17 00:00:00 2001 +From: Tim Harvey <tharvey@gateworks.com> +Date: Tue, 22 Oct 2013 21:51:25 -0700 +Subject: [PATCH 2/3] ARM: dts: added several new imx-pinmux groups + +Signed-off-by: Tim Harvey <tharvey@gateworks.com> +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +--- + arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 60 insertions(+) + +--- a/arch/arm/boot/dts/imx6qdl.dtsi ++++ b/arch/arm/boot/dts/imx6qdl.dtsi +@@ -639,6 +639,14 @@ + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000 + >; + }; ++ ++ pinctrl_audmux_4: audmux-4 { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x80000000 ++ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x80000000 ++ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000 ++ >; ++ }; + }; + + ecspi1 { +@@ -811,6 +819,28 @@ + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; ++ ++ /* No Strobe */ ++ pinctrl_gpmi_nand_2: gpmi-nand-2 { ++ fsl,pins = < ++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; + }; + + hdmi_hdcp { +@@ -1058,6 +1088,13 @@ + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; ++ ++ pinctrl_uart1_2: uart1grp-2 { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart2 { +@@ -1076,6 +1113,13 @@ + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; ++ ++ pinctrl_uart2_3: uart2grp-3 { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart3 { +@@ -1096,6 +1140,13 @@ + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; ++ ++ pinctrl_uart3_3: uart3grp-3 { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart4 { +@@ -1106,6 +1157,15 @@ + >; + }; + }; ++ ++ uart5 { ++ pinctrl_uart5_1: uart5grp-1 { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; + + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { diff --git a/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch b/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch new file mode 100644 index 0000000000..bfc909b79e --- /dev/null +++ b/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch @@ -0,0 +1,2811 @@ +From e3946fe8050534ccaf8c1266cb1fa90c7f3345c3 Mon Sep 17 00:00:00 2001 +From: Tim Harvey <tharvey@gateworks.com> +Date: Fri, 7 Feb 2014 15:24:56 +0800 +Subject: [PATCH] ARM: dts: add Gateworks Ventana support + +The Gateworks Ventana product family consists of several baseboard designs +based on the Freescale i.MX6 family of processors. Each baseboard has a +different set of possible features. + +Signed-off-by: Tim Harvey <tharvey@gateworks.com> +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +--- + arch/arm/boot/dts/Makefile | 9 + + arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++ + arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++ + arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++ + arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++ + arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++ + arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++ + arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++ + arch/arm/boot/dts/imx6q-gw5400-a.dts | 546 ++++++++++++++++++++++++++++++++ + arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++ + arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++++++++++++++++ + arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++++++++++++++++++++ + arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++++++++++++++++++++++ + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++++++++++++++++++++++++ + 14 files changed, 2716 insertions(+) + create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts + create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts + create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts + create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts + create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts + create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts + create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts + create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts + create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts + create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi + create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi + create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi + create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -154,12 +154,21 @@ dtb-$(CONFIG_ARCH_MXC) += \ + imx53-qsb.dtb \ + imx53-smd.dtb \ + imx6dl-cubox-i.dtb \ ++ imx6dl-gw51xx.dtb \ ++ imx6dl-gw52xx.dtb \ ++ imx6dl-gw53xx.dtb \ ++ imx6dl-gw54xx.dtb \ + imx6dl-hummingboard.dtb \ + imx6dl-sabreauto.dtb \ + imx6dl-sabresd.dtb \ + imx6dl-wandboard.dtb \ + imx6q-arm2.dtb \ + imx6q-cubox-i.dtb \ ++ imx6q-gw51xx.dtb \ ++ imx6q-gw52xx.dtb \ ++ imx6q-gw53xx.dtb \ ++ imx6q-gw5400-a.dtb \ ++ imx6q-gw54xx.dtb \ + imx6q-phytec-pbab01.dtb \ + imx6q-sabreauto.dtb \ + imx6q-sabrelite.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts +@@ -0,0 +1,19 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6dl.dtsi" ++#include "imx6qdl-gw51xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 DualLite GW51XX"; ++ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts +@@ -0,0 +1,19 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6dl.dtsi" ++#include "imx6qdl-gw52xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 DualLite GW52XX"; ++ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts +@@ -0,0 +1,19 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6dl.dtsi" ++#include "imx6qdl-gw53xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 DualLite GW53XX"; ++ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts +@@ -0,0 +1,19 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6dl.dtsi" ++#include "imx6qdl-gw54xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 DualLite GW54XX"; ++ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-gw51xx.dts +@@ -0,0 +1,19 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6q.dtsi" ++#include "imx6qdl-gw54xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 Quad GW51XX"; ++ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-gw52xx.dts +@@ -0,0 +1,23 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6q.dtsi" ++#include "imx6qdl-gw52xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 Quad GW52XX"; ++ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; ++}; ++ ++&sata { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-gw53xx.dts +@@ -0,0 +1,23 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6q.dtsi" ++#include "imx6qdl-gw53xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 Quad GW53XX"; ++ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; ++}; ++ ++&sata { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts +@@ -0,0 +1,546 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6q.dtsi" ++ ++/ { ++ model = "Gateworks Ventana GW5400-A"; ++ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q"; ++ ++ /* these are used by bootloader for disabling nodes */ ++ aliases { ++ ethernet0 = &fec; ++ ethernet1 = ð1; ++ i2c0 = &i2c1; ++ i2c1 = &i2c2; ++ i2c2 = &i2c3; ++ led0 = &led0; ++ led1 = &led1; ++ led2 = &led2; ++ sky2 = ð1; ++ ssi0 = &ssi1; ++ spi0 = &ecspi1; ++ usb0 = &usbh1; ++ usb1 = &usbotg; ++ usdhc2 = &usdhc3; ++ }; ++ ++ chosen { ++ bootargs = "console=ttymxc1,115200"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led0: user1 { ++ label = "user1"; ++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led1: user2 { ++ label = "user2"; ++ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ ++ default-state = "off"; ++ }; ++ ++ led2: user3 { ++ label = "user3"; ++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ ++ default-state = "off"; ++ }; ++ }; ++ ++ memory { ++ reg = <0x10000000 0x40000000>; ++ }; ++ ++ pps { ++ compatible = "pps-gpio"; ++ gpios = <&gpio1 5 0>; ++ status = "okay"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_1p0v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "1P0V"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ }; ++ ++ reg_3p3v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_h1_vbus: regulator@2 { ++ compatible = "regulator-fixed"; ++ reg = <2>; ++ regulator-name = "usb_h1_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_otg_vbus: regulator@3 { ++ compatible = "regulator-fixed"; ++ reg = <3>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 22 0>; ++ enable-active-high; ++ }; ++ }; ++ ++ sound { ++ compatible = "fsl,imx6q-sabrelite-sgtl5000", ++ "fsl,imx-audio-sgtl5000"; ++ model = "imx6q-sabrelite-sgtl5000"; ++ ssi-controller = <&ssi1>; ++ audio-codec = <&codec>; ++ audio-routing = ++ "MIC_IN", "Mic Jack", ++ "Mic Jack", "Mic Bias", ++ "Headphone Jack", "HP_OUT"; ++ mux-int-port = <1>; ++ mux-ext-port = <4>; ++ }; ++}; ++ ++&audmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_audmux>; ++ status = "okay"; ++}; ++ ++&ecspi1 { ++ fsl,spi-num-chipselects = <1>; ++ cs-gpios = <&gpio3 19 0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_ecspi1>; ++ status = "okay"; ++ ++ flash: m25p80@0 { ++ compatible = "sst,w25q256"; ++ spi-max-frequency = <30000000>; ++ reg = <0>; ++ }; ++}; ++ ++&fec { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet>; ++ phy-mode = "rgmii"; ++ phy-reset-gpios = <&gpio1 30 0>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++ ++ eeprom1: eeprom@50 { ++ compatible = "atmel,24c02"; ++ reg = <0x50>; ++ pagesize = <16>; ++ }; ++ ++ eeprom2: eeprom@51 { ++ compatible = "atmel,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++ ++ eeprom3: eeprom@52 { ++ compatible = "atmel,24c02"; ++ reg = <0x52>; ++ pagesize = <16>; ++ }; ++ ++ eeprom4: eeprom@53 { ++ compatible = "atmel,24c02"; ++ reg = <0x53>; ++ pagesize = <16>; ++ }; ++ ++ gpio: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ reg = <0x23>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ hwmon: gsc@29 { ++ compatible = "gw,gsp"; ++ reg = <0x29>; ++ }; ++ ++ rtc: ds1672@68 { ++ compatible = "dallas,ds1672"; ++ reg = <0x68>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c2>; ++ status = "okay"; ++ ++ pmic: pfuze100@08 { ++ compatible = "fsl,pfuze100"; ++ reg = <0x08>; ++ ++ regulators { ++ sw1a_reg: sw1ab { ++ regulator-min-microvolt = <300000>; ++ regulator-max-microvolt = <1875000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw1c_reg: sw1c { ++ regulator-min-microvolt = <300000>; ++ regulator-max-microvolt = <1875000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <3950000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3a_reg: sw3a { ++ regulator-min-microvolt = <400000>; ++ regulator-max-microvolt = <1975000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3b_reg: sw3b { ++ regulator-min-microvolt = <400000>; ++ regulator-max-microvolt = <1975000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw4_reg: sw4 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ swbst_reg: swbst { ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5150000>; ++ }; ++ ++ snvs_reg: vsnvs { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vref_reg: vrefddr { ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vgen1_reg: vgen1 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen2_reg: vgen2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen3_reg: vgen3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ vgen4_reg: vgen4 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen5_reg: vgen5 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen6_reg: vgen6 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ pciswitch: pex8609@3f { ++ compatible = "plx,pex8609"; ++ reg = <0x3f>; ++ }; ++ ++ pciclkgen: si52147@6b { ++ compatible = "sil,si52147"; ++ reg = <0x6b>; ++ }; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c3>; ++ status = "okay"; ++ ++ accelerometer: mma8450@1c { ++ compatible = "fsl,mma8450"; ++ reg = <0x1c>; ++ }; ++ ++ codec: sgtl5000@0a { ++ compatible = "fsl,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&clks 201>; ++ VDDA-supply = <&sw4_reg>; ++ VDDIO-supply = <®_3p3v>; ++ }; ++ ++ hdmiin: adv7611@4c { ++ compatible = "adi,adv7611"; ++ reg = <0x4c>; ++ }; ++ ++ touchscreen: egalax_ts@04 { ++ compatible = "eeti,egalax_ts"; ++ reg = <0x04>; ++ interrupt-parent = <&gpio7>; ++ interrupts = <12 2>; /* gpio7_12 active low */ ++ wakeup-gpios = <&gpio7 12 0>; ++ }; ++ ++ videoout: adv7393@2a { ++ compatible = "adi,adv7393"; ++ reg = <0x2a>; ++ }; ++ ++ videoin: adv7180@20 { ++ compatible = "adi,adv7180"; ++ reg = <0x20>; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ ++ imx6q-gw5400-a { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ ++ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ ++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ ++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ ++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ ++ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ ++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ ++ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ ++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ ++ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ ++ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ ++ >; ++ }; ++ ++ pinctrl_audmux: audmuxgrp { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 ++ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 ++ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 ++ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 ++ >; ++ }; ++ ++ pinctrl_ecspi1: ecspi1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 ++ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 ++ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 ++ >; ++ }; ++ ++ pinctrl_enet: enetgrp { ++ fsl,pins = < ++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 ++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 ++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 ++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 ++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 ++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c2: i2c2grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c3: i2c3grp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ ++ pinctrl_usdhc3: usdhc3grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 ++ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 ++ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 ++ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 ++ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 ++ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 ++ >; ++ }; ++ }; ++}; ++ ++&ldb { ++ status = "okay"; ++ lvds-channel@0 { ++ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; ++ }; ++}; ++ ++&pcie { ++ reset-gpio = <&gpio1 29 0>; ++ status = "okay"; ++ ++ eth1: sky2@8 { /* MAC/PHY on bus 8 */ ++ compatible = "marvell,sky2"; ++ }; ++}; ++ ++&ssi1 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ vbus-supply = <®_usb_otg_vbus>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ vbus-supply = <®_usb_h1_vbus>; ++ status = "okay"; ++}; ++ ++&usdhc3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc3>; ++ cd-gpios = <&gpio7 0 0>; ++ vmmc-supply = <®_3p3v>; ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-gw54xx.dts +@@ -0,0 +1,23 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++#include "imx6q.dtsi" ++#include "imx6qdl-gw54xx.dtsi" ++ ++/ { ++ model = "Gateworks Ventana i.MX6 Quad GW54XX"; ++ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; ++}; ++ ++&sata { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +@@ -0,0 +1,374 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/ { ++ /* these are used by bootloader for disabling nodes */ ++ aliases { ++ can0 = &can1; ++ ethernet0 = &fec; ++ led0 = &led0; ++ led1 = &led1; ++ nand = &gpmi; ++ usb0 = &usbh1; ++ usb1 = &usbotg; ++ }; ++ ++ chosen { ++ bootargs = "console=ttymxc1,115200"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led0: user1 { ++ label = "user1"; ++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led1: user2 { ++ label = "user2"; ++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ ++ default-state = "off"; ++ }; ++ }; ++ ++ memory { ++ reg = <0x10000000 0x20000000>; ++ }; ++ ++ pps { ++ compatible = "pps-gpio"; ++ gpios = <&gpio1 26 0>; ++ status = "okay"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_3p3v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_5p0v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "5P0V"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_otg_vbus: regulator@2 { ++ compatible = "regulator-fixed"; ++ reg = <2>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 22 0>; ++ enable-active-high; ++ }; ++ }; ++}; ++ ++&fec { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet>; ++ phy-mode = "rgmii"; ++ phy-reset-gpios = <&gpio1 30 0>; ++ status = "okay"; ++}; ++ ++&gpmi { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_gpmi_nand>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++ ++ eeprom1: eeprom@50 { ++ compatible = "atmel,24c02"; ++ reg = <0x50>; ++ pagesize = <16>; ++ }; ++ ++ eeprom2: eeprom@51 { ++ compatible = "atmel,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++ ++ eeprom3: eeprom@52 { ++ compatible = "atmel,24c02"; ++ reg = <0x52>; ++ pagesize = <16>; ++ }; ++ ++ eeprom4: eeprom@53 { ++ compatible = "atmel,24c02"; ++ reg = <0x53>; ++ pagesize = <16>; ++ }; ++ ++ gpio: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ reg = <0x23>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ hwmon: gsc@29 { ++ compatible = "gw,gsp"; ++ reg = <0x29>; ++ }; ++ ++ rtc: ds1672@68 { ++ compatible = "dallas,ds1672"; ++ reg = <0x68>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c2>; ++ status = "okay"; ++ ++ pmic: ltc3676@3c { ++ compatible = "ltc,ltc3676"; ++ reg = <0x3c>; ++ ++ regulators { ++ sw1_reg: ltc3676__sw1 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw2_reg: ltc3676__sw2 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3_reg: ltc3676__sw3 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw4_reg: ltc3676__sw4 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo2_reg: ltc3676__ldo2 { ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo4_reg: ltc3676__ldo4 { ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ }; ++ }; ++ }; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c3>; ++ status = "okay"; ++ ++ videoin: adv7180@20 { ++ compatible = "adi,adv7180"; ++ reg = <0x20>; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ ++ imx6qdl-gw51xx { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ ++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ ++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ ++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ ++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ ++ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ ++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ ++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ ++ >; ++ }; ++ ++ pinctrl_enet: enetgrp { ++ fsl,pins = < ++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 ++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 ++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 ++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 ++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 ++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 ++ >; ++ }; ++ ++ pinctrl_gpmi_nand: gpminandgrp { ++ fsl,pins = < ++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c2: i2c2grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c3: i2c3grp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart3: uart3grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ }; ++}; ++ ++&pcie { ++ reset-gpio = <&gpio1 0 0>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart3>; ++ status = "okay"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ vbus-supply = <®_usb_otg_vbus>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +@@ -0,0 +1,490 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/ { ++ /* these are used by bootloader for disabling nodes */ ++ aliases { ++ ethernet0 = &fec; ++ led0 = &led0; ++ led1 = &led1; ++ led2 = &led2; ++ nand = &gpmi; ++ ssi0 = &ssi1; ++ usb0 = &usbh1; ++ usb1 = &usbotg; ++ usdhc2 = &usdhc3; ++ }; ++ ++ chosen { ++ bootargs = "console=ttymxc1,115200"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led0: user1 { ++ label = "user1"; ++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led1: user2 { ++ label = "user2"; ++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ ++ default-state = "off"; ++ }; ++ ++ led2: user3 { ++ label = "user3"; ++ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ ++ default-state = "off"; ++ }; ++ }; ++ ++ memory { ++ reg = <0x10000000 0x20000000>; ++ }; ++ ++ pps { ++ compatible = "pps-gpio"; ++ gpios = <&gpio1 26 0>; ++ status = "okay"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_1p0v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "1P0V"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ }; ++ ++ /* remove this fixed regulator once ltc3676__sw2 driver available */ ++ reg_1p8v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "1P8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ ++ reg_3p3v: regulator@2 { ++ compatible = "regulator-fixed"; ++ reg = <2>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_5p0v: regulator@3 { ++ compatible = "regulator-fixed"; ++ reg = <3>; ++ regulator-name = "5P0V"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_otg_vbus: regulator@4 { ++ compatible = "regulator-fixed"; ++ reg = <4>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 22 0>; ++ enable-active-high; ++ }; ++ }; ++ ++ sound { ++ compatible = "fsl,imx6q-sabrelite-sgtl5000", ++ "fsl,imx-audio-sgtl5000"; ++ model = "imx6q-sabrelite-sgtl5000"; ++ ssi-controller = <&ssi1>; ++ audio-codec = <&codec>; ++ audio-routing = ++ "MIC_IN", "Mic Jack", ++ "Mic Jack", "Mic Bias", ++ "Headphone Jack", "HP_OUT"; ++ mux-int-port = <1>; ++ mux-ext-port = <4>; ++ }; ++}; ++ ++&audmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_audmux>; ++ status = "okay"; ++}; ++ ++&fec { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet>; ++ phy-mode = "rgmii"; ++ phy-reset-gpios = <&gpio1 30 0>; ++ status = "okay"; ++}; ++ ++&gpmi { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_gpmi_nand>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++ ++ eeprom1: eeprom@50 { ++ compatible = "atmel,24c02"; ++ reg = <0x50>; ++ pagesize = <16>; ++ }; ++ ++ eeprom2: eeprom@51 { ++ compatible = "atmel,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++ ++ eeprom3: eeprom@52 { ++ compatible = "atmel,24c02"; ++ reg = <0x52>; ++ pagesize = <16>; ++ }; ++ ++ eeprom4: eeprom@53 { ++ compatible = "atmel,24c02"; ++ reg = <0x53>; ++ pagesize = <16>; ++ }; ++ ++ gpio: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ reg = <0x23>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ hwmon: gsc@29 { ++ compatible = "gw,gsp"; ++ reg = <0x29>; ++ }; ++ ++ rtc: ds1672@68 { ++ compatible = "dallas,ds1672"; ++ reg = <0x68>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c2>; ++ status = "okay"; ++ ++ pciswitch: pex8609@3f { ++ compatible = "plx,pex8609"; ++ reg = <0x3f>; ++ }; ++ ++ pmic: ltc3676@3c { ++ compatible = "ltc,ltc3676"; ++ reg = <0x3c>; ++ ++ regulators { ++ sw1_reg: ltc3676__sw1 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw2_reg: ltc3676__sw2 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3_reg: ltc3676__sw3 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw4_reg: ltc3676__sw4 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo2_reg: ltc3676__ldo2 { ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo3_reg: ltc3676__ldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo4_reg: ltc3676__ldo4 { ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ }; ++ }; ++ }; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c3>; ++ status = "okay"; ++ ++ accelerometer: fxos8700@1e { ++ compatible = "fsl,fxos8700"; ++ reg = <0x13>; ++ }; ++ ++ codec: sgtl5000@0a { ++ compatible = "fsl,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&clks 169>; ++ VDDA-supply = <®_1p8v>; ++ VDDIO-supply = <®_3p3v>; ++ }; ++ ++ touchscreen: egalax_ts@04 { ++ compatible = "eeti,egalax_ts"; ++ reg = <0x04>; ++ interrupt-parent = <&gpio7>; ++ interrupts = <12 2>; /* gpio7_12 active low */ ++ wakeup-gpios = <&gpio7 12 0>; ++ }; ++ ++ videoin: adv7180@20 { ++ compatible = "adi,adv7180"; ++ reg = <0x20>; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ ++ imx6qdl-gw52xx { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ ++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ ++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ ++ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ ++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ ++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ ++ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ ++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ ++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ ++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ ++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ ++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ ++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ ++ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ ++ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ ++ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ ++ >; ++ }; ++ ++ pinctrl_audmux: audmuxgrp { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 ++ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 ++ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 ++ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 ++ >; ++ }; ++ ++ pinctrl_enet: enetgrp { ++ fsl,pins = < ++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 ++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 ++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 ++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 ++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 ++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 ++ >; ++ }; ++ ++ pinctrl_gpmi_nand: gpminandgrp { ++ fsl,pins = < ++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c2: i2c2grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c3: i2c3grp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ ++ pinctrl_usdhc3: usdhc3grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 ++ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 ++ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 ++ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 ++ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 ++ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 ++ >; ++ }; ++ }; ++}; ++ ++&ldb { ++ status = "okay"; ++ lvds-channel@0 { ++ crtcs = <&ipu1 0>, <&ipu1 1>; ++ }; ++}; ++ ++&pcie { ++ reset-gpio = <&gpio1 29 0>; ++ status = "okay"; ++}; ++ ++&ssi1 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ vbus-supply = <®_usb_otg_vbus>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ status = "okay"; ++}; ++ ++&usdhc3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc3>; ++ cd-gpios = <&gpio7 0 0>; ++ vmmc-supply = <®_3p3v>; ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +@@ -0,0 +1,553 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/ { ++ /* these are used by bootloader for disabling nodes */ ++ aliases { ++ can0 = &can1; ++ ethernet0 = &fec; ++ ethernet1 = ð1; ++ led0 = &led0; ++ led1 = &led1; ++ led2 = &led2; ++ nand = &gpmi; ++ sky2 = ð1; ++ ssi0 = &ssi1; ++ usb0 = &usbh1; ++ usb1 = &usbotg; ++ usdhc2 = &usdhc3; ++ }; ++ ++ chosen { ++ bootargs = "console=ttymxc1,115200"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led0: user1 { ++ label = "user1"; ++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led1: user2 { ++ label = "user2"; ++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ ++ default-state = "off"; ++ }; ++ ++ led2: user3 { ++ label = "user3"; ++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ ++ default-state = "off"; ++ }; ++ }; ++ ++ memory { ++ reg = <0x10000000 0x40000000>; ++ }; ++ ++ pps { ++ compatible = "pps-gpio"; ++ gpios = <&gpio1 26 0>; ++ status = "okay"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_1p0v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "1P0V"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ }; ++ ++ /* remove when pmic 1p8 regulator available */ ++ reg_1p8v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "1P8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ ++ reg_3p3v: regulator@2 { ++ compatible = "regulator-fixed"; ++ reg = <2>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_h1_vbus: regulator@3 { ++ compatible = "regulator-fixed"; ++ reg = <3>; ++ regulator-name = "usb_h1_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_otg_vbus: regulator@4 { ++ compatible = "regulator-fixed"; ++ reg = <4>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 22 0>; ++ enable-active-high; ++ }; ++ }; ++ ++ sound { ++ compatible = "fsl,imx6q-sabrelite-sgtl5000", ++ "fsl,imx-audio-sgtl5000"; ++ model = "imx6q-sabrelite-sgtl5000"; ++ ssi-controller = <&ssi1>; ++ audio-codec = <&codec>; ++ audio-routing = ++ "MIC_IN", "Mic Jack", ++ "Mic Jack", "Mic Bias", ++ "Headphone Jack", "HP_OUT"; ++ mux-int-port = <1>; ++ mux-ext-port = <4>; ++ }; ++}; ++ ++&audmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_audmux>; ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_flexcan1>; ++ status = "okay"; ++}; ++ ++&fec { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet>; ++ phy-mode = "rgmii"; ++ phy-reset-gpios = <&gpio1 30 0>; ++ status = "okay"; ++}; ++ ++&gpmi { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_gpmi_nand>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++ ++ eeprom1: eeprom@50 { ++ compatible = "atmel,24c02"; ++ reg = <0x50>; ++ pagesize = <16>; ++ }; ++ ++ eeprom2: eeprom@51 { ++ compatible = "atmel,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++ ++ eeprom3: eeprom@52 { ++ compatible = "atmel,24c02"; ++ reg = <0x52>; ++ pagesize = <16>; ++ }; ++ ++ eeprom4: eeprom@53 { ++ compatible = "atmel,24c02"; ++ reg = <0x53>; ++ pagesize = <16>; ++ }; ++ ++ gpio: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ reg = <0x23>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ hwmon: gsc@29 { ++ compatible = "gw,gsp"; ++ reg = <0x29>; ++ }; ++ ++ rtc: ds1672@68 { ++ compatible = "dallas,ds1672"; ++ reg = <0x68>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c2>; ++ status = "okay"; ++ ++ pciclkgen: si53156@6b { ++ compatible = "sil,si53156"; ++ reg = <0x6b>; ++ }; ++ ++ pciswitch: pex8606@3f { ++ compatible = "plx,pex8606"; ++ reg = <0x3f>; ++ }; ++ ++ pmic: ltc3676@3c { ++ compatible = "ltc,ltc3676"; ++ reg = <0x3c>; ++ ++ regulators { ++ /* VDD_SOC */ ++ sw1_reg: ltc3676__sw1 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_1P8 */ ++ sw2_reg: ltc3676__sw2 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_ARM */ ++ sw3_reg: ltc3676__sw3 { ++ regulator-min-microvolt = <1175000>; ++ regulator-max-microvolt = <1175000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_DDR */ ++ sw4_reg: ltc3676__sw4 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_2P5 */ ++ ldo2_reg: ltc3676__ldo2 { ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_1P8 */ ++ ldo3_reg: ltc3676__ldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ /* VDD_HIGH */ ++ ldo4_reg: ltc3676__ldo4 { ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ }; ++ }; ++ }; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c3>; ++ status = "okay"; ++ ++ accelerometer: fxos8700@1e { ++ compatible = "fsl,fxos8700"; ++ reg = <0x1e>; ++ }; ++ ++ codec: sgtl5000@0a { ++ compatible = "fsl,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&clks 201>; ++ VDDA-supply = <®_1p8v>; ++ VDDIO-supply = <®_3p3v>; ++ }; ++ ++ hdmiin: adv7611@4c { ++ compatible = "adi,adv7611"; ++ reg = <0x4c>; ++ }; ++ ++ touchscreen: egalax_ts@04 { ++ compatible = "eeti,egalax_ts"; ++ reg = <0x04>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <11 2>; /* gpio1_11 active low */ ++ wakeup-gpios = <&gpio1 11 0>; ++ }; ++ ++ videoout: adv7393@2a { ++ compatible = "adi,adv7393"; ++ reg = <0x2a>; ++ }; ++ ++ videoin: adv7180@20 { ++ compatible = "adi,adv7180"; ++ reg = <0x20>; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ ++ imx6qdl-gw53xx { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */ ++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */ ++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ ++ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */ ++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ ++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ ++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ ++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ ++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ ++ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */ ++ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */ ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */ ++ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */ ++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ ++ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */ ++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ ++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ ++ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */ ++ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */ ++ >; ++ }; ++ ++ pinctrl_audmux: audmuxgrp { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 ++ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 ++ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 ++ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 ++ >; ++ }; ++ ++ pinctrl_enet: enetgrp { ++ fsl,pins = < ++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 ++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 ++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 ++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 ++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 ++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 ++ >; ++ }; ++ ++ pinctrl_flexcan1: flexcan1grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 ++ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 ++ >; ++ }; ++ ++ pinctrl_gpmi_nand: gpminandgrp { ++ fsl,pins = < ++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c2: i2c2grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c3: i2c3grp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ ++ pinctrl_usdhc3: usdhc3grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 ++ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 ++ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 ++ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 ++ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 ++ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 ++ >; ++ }; ++ }; ++}; ++ ++&ldb { ++ status = "okay"; ++ ++ lvds-channel@1 { ++ fsl,data-mapping = "spwg"; ++ fsl,data-width = <18>; ++ status = "okay"; ++ ++ display-timings { ++ native-mode = <&timing0>; ++ timing0: hsd100pxn1 { ++ clock-frequency = <65000000>; ++ hactive = <1024>; ++ vactive = <768>; ++ hback-porch = <220>; ++ hfront-porch = <40>; ++ vback-porch = <21>; ++ vfront-porch = <7>; ++ hsync-len = <60>; ++ vsync-len = <10>; ++ }; ++ }; ++ }; ++}; ++ ++&pcie { ++ reset-gpio = <&gpio1 29 0>; ++ status = "okay"; ++ ++ eth1: sky2@8 { /* MAC/PHY on bus 8 */ ++ compatible = "marvell,sky2"; ++ }; ++}; ++ ++&ssi1 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ vbus-supply = <®_usb_otg_vbus>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ vbus-supply = <®_usb_h1_vbus>; ++ status = "okay"; ++}; ++ ++&usdhc3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc3>; ++ cd-gpios = <&gpio7 0 0>; ++ vmmc-supply = <®_3p3v>; ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +@@ -0,0 +1,580 @@ ++/* ++ * Copyright 2013 Gateworks Corporation ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/ { ++ /* these are used by bootloader for disabling nodes */ ++ aliases { ++ can0 = &can1; ++ ethernet0 = &fec; ++ ethernet1 = ð1; ++ led0 = &led0; ++ led1 = &led1; ++ led2 = &led2; ++ nand = &gpmi; ++ sky2 = ð1; ++ ssi0 = &ssi1; ++ usb0 = &usbh1; ++ usb1 = &usbotg; ++ usdhc2 = &usdhc3; ++ }; ++ ++ chosen { ++ bootargs = "console=ttymxc1,115200"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led0: user1 { ++ label = "user1"; ++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led1: user2 { ++ label = "user2"; ++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ ++ default-state = "off"; ++ }; ++ ++ led2: user3 { ++ label = "user3"; ++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ ++ default-state = "off"; ++ }; ++ }; ++ ++ memory { ++ reg = <0x10000000 0x40000000>; ++ }; ++ ++ pps { ++ compatible = "pps-gpio"; ++ gpios = <&gpio1 26 0>; ++ status = "okay"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_1p0v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "1P0V"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ }; ++ ++ reg_3p3v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_h1_vbus: regulator@2 { ++ compatible = "regulator-fixed"; ++ reg = <2>; ++ regulator-name = "usb_h1_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb_otg_vbus: regulator@3 { ++ compatible = "regulator-fixed"; ++ reg = <3>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 22 0>; ++ enable-active-high; ++ }; ++ }; ++ ++ sound { ++ compatible = "fsl,imx6q-sabrelite-sgtl5000", ++ "fsl,imx-audio-sgtl5000"; ++ model = "imx6q-sabrelite-sgtl5000"; ++ ssi-controller = <&ssi1>; ++ audio-codec = <&codec>; ++ audio-routing = ++ "MIC_IN", "Mic Jack", ++ "Mic Jack", "Mic Bias", ++ "Headphone Jack", "HP_OUT"; ++ mux-int-port = <1>; ++ mux-ext-port = <4>; ++ }; ++}; ++ ++&audmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_flexcan1>; ++ status = "okay"; ++}; ++ ++&fec { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet>; ++ phy-mode = "rgmii"; ++ phy-reset-gpios = <&gpio1 30 0>; ++ status = "okay"; ++}; ++ ++&gpmi { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_gpmi_nand>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++ ++ eeprom1: eeprom@50 { ++ compatible = "atmel,24c02"; ++ reg = <0x50>; ++ pagesize = <16>; ++ }; ++ ++ eeprom2: eeprom@51 { ++ compatible = "atmel,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++ ++ eeprom3: eeprom@52 { ++ compatible = "atmel,24c02"; ++ reg = <0x52>; ++ pagesize = <16>; ++ }; ++ ++ eeprom4: eeprom@53 { ++ compatible = "atmel,24c02"; ++ reg = <0x53>; ++ pagesize = <16>; ++ }; ++ ++ gpio: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ reg = <0x23>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ hwmon: gsc@29 { ++ compatible = "gw,gsp"; ++ reg = <0x29>; ++ }; ++ ++ rtc: ds1672@68 { ++ compatible = "dallas,ds1672"; ++ reg = <0x68>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c2>; ++ status = "okay"; ++ ++ pmic: pfuze100@08 { ++ compatible = "fsl,pfuze100"; ++ reg = <0x08>; ++ ++ regulators { ++ sw1a_reg: sw1ab { ++ regulator-min-microvolt = <300000>; ++ regulator-max-microvolt = <1875000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw1c_reg: sw1c { ++ regulator-min-microvolt = <300000>; ++ regulator-max-microvolt = <1875000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <3950000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3a_reg: sw3a { ++ regulator-min-microvolt = <400000>; ++ regulator-max-microvolt = <1975000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3b_reg: sw3b { ++ regulator-min-microvolt = <400000>; ++ regulator-max-microvolt = <1975000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw4_reg: sw4 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ swbst_reg: swbst { ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5150000>; ++ }; ++ ++ snvs_reg: vsnvs { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vref_reg: vrefddr { ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vgen1_reg: vgen1 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen2_reg: vgen2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen3_reg: vgen3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ vgen4_reg: vgen4 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen5_reg: vgen5 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen6_reg: vgen6 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ pciswitch: pex8609@3f { ++ compatible = "plx,pex8609"; ++ reg = <0x3f>; ++ }; ++ ++ pciclkgen: si52147@6b { ++ compatible = "sil,si52147"; ++ reg = <0x6b>; ++ }; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c3>; ++ status = "okay"; ++ ++ accelerometer: fxos8700@1e { ++ compatible = "fsl,fxos8700"; ++ reg = <0x1e>; ++ }; ++ ++ codec: sgtl5000@0a { ++ compatible = "fsl,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&clks 201>; ++ VDDA-supply = <&sw4_reg>; ++ VDDIO-supply = <®_3p3v>; ++ }; ++ ++ hdmiin: adv7611@4c { ++ compatible = "adi,adv7611"; ++ reg = <0x4c>; ++ }; ++ ++ touchscreen: egalax_ts@04 { ++ compatible = "eeti,egalax_ts"; ++ reg = <0x04>; ++ interrupt-parent = <&gpio7>; ++ interrupts = <12 2>; /* gpio7_12 active low */ ++ wakeup-gpios = <&gpio7 12 0>; ++ }; ++ ++ videoout: adv7393@2a { ++ compatible = "adi,adv7393"; ++ reg = <0x2a>; ++ }; ++ ++ videoin: adv7180@20 { ++ compatible = "adi,adv7180"; ++ reg = <0x20>; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ ++ imx6qdl-gw54xx { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ ++ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ ++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ ++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ ++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ ++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ ++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ ++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ ++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ ++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ ++ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ ++ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ ++ >; ++ }; ++ ++ pinctrl_audmux: audmuxgrp { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 ++ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 ++ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 ++ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 ++ >; ++ }; ++ ++ pinctrl_enet: enetgrp { ++ fsl,pins = < ++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 ++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 ++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 ++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 ++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 ++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 ++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 ++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 ++ >; ++ }; ++ ++ pinctrl_flexcan1: flexcan1grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 ++ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 ++ >; ++ }; ++ ++ pinctrl_gpmi_nand: gpminandgrp { ++ fsl,pins = < ++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c2: i2c2grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_i2c3: i2c3grp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_usbotg: usbotggrp { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ ++ pinctrl_usdhc3: usdhc3grp { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 ++ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 ++ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 ++ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 ++ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 ++ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 ++ >; ++ }; ++ }; ++}; ++ ++&ldb { ++ status = "okay"; ++ ++ lvds-channel@1 { ++ fsl,data-mapping = "spwg"; ++ fsl,data-width = <18>; ++ status = "okay"; ++ ++ display-timings { ++ native-mode = <&timing0>; ++ timing0: hsd100pxn1 { ++ clock-frequency = <65000000>; ++ hactive = <1024>; ++ vactive = <768>; ++ hback-porch = <220>; ++ hfront-porch = <40>; ++ vback-porch = <21>; ++ vfront-porch = <7>; ++ hsync-len = <60>; ++ vsync-len = <10>; ++ }; ++ }; ++ }; ++}; ++ ++&pcie { ++ reset-gpio = <&gpio1 29 0>; ++ status = "okay"; ++ ++ eth1: sky2@8 { /* MAC/PHY on bus 8 */ ++ compatible = "marvell,sky2"; ++ }; ++}; ++ ++&ssi1 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&ssi2 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ vbus-supply = <®_usb_otg_vbus>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usbotg>; ++ disable-over-current; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ vbus-supply = <®_usb_h1_vbus>; ++ status = "okay"; ++}; ++ ++&usdhc3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc3>; ++ cd-gpios = <&gpio7 0 0>; ++ vmmc-supply = <®_3p3v>; ++ status = "okay"; ++}; diff --git a/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch new file mode 100644 index 0000000000..bab418bf26 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch @@ -0,0 +1,69 @@ +From: Tim Harvey <tharvey@gateworks.com> +Subject: [PATCH] sky2: allow mac to come from dt + +The driver reads the mac address from the device registers which would +need to have been programmed by the bootloader. This patch adds +the ability to pull the mac from devicetree via the aliases/sky2 node. + +Signed-off-by: Tim Harvey <tharvey@gateworks.com> +--- + drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++- + 1 file changed, 32 insertions(+), 1 deletion(-) + +--- a/drivers/net/ethernet/marvell/sky2.c ++++ b/drivers/net/ethernet/marvell/sky2.c +@@ -44,6 +44,8 @@ + #include <linux/prefetch.h> + #include <linux/debugfs.h> + #include <linux/mii.h> ++#include <linux/of_device.h> ++#include <linux/of_net.h> + + #include <asm/irq.h> + +@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd + { + struct sky2_port *sky2; + struct net_device *dev = alloc_etherdev(sizeof(*sky2)); ++ unsigned char *iap, tmpaddr[ETH_ALEN]; + + if (!dev) + return NULL; +@@ -4805,8 +4808,36 @@ static struct net_device *sky2_init_netd + + dev->features |= dev->hw_features; + ++ /* ++ * try to get mac address in the following order: ++ * 1) from device tree data ++ * 2) from internal registers set by bootloader ++ */ ++ iap = NULL; ++ if (IS_ENABLED(CONFIG_OF)) { ++ struct device_node *np; ++ np = of_find_node_by_path("/aliases"); ++ if (np) { ++ const char *path = of_get_property(np, "sky2", NULL); ++ if (path) ++ np = of_find_node_by_path(path); ++ if (np) ++ path = of_get_mac_address(np); ++ if (path) ++ iap = (unsigned char *) path; ++ } ++ } ++ ++ /* ++ * 2) mac registers set by bootloader ++ */ ++ if (!iap || !is_valid_ether_addr(iap)) { ++ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); ++ iap = &tmpaddr[0]; ++ } ++ + /* read the mac address */ +- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); ++ memcpy(dev->dev_addr, iap, ETH_ALEN); + + return dev; + } diff --git a/target/linux/imx6/patches-3.14/100-bootargs.patch b/target/linux/imx6/patches-3.14/100-bootargs.patch new file mode 100644 index 0000000000..0954391203 --- /dev/null +++ b/target/linux/imx6/patches-3.14/100-bootargs.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/boot/dts/imx6dl-wandboard.dts ++++ b/arch/arm/boot/dts/imx6dl-wandboard.dts +@@ -19,4 +19,8 @@ + memory { + reg = <0x10000000 0x40000000>; + }; ++ ++ chosen { ++ bootargs = "console=ttymxc0,115200"; ++ }; + }; diff --git a/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch new file mode 100644 index 0000000000..a175b1eb7c --- /dev/null +++ b/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch @@ -0,0 +1,43 @@ +From: Tim Harvey <tharvey@gateworks.com> +Subject: [PATCH] PCI: imx6: add support for legacy irqs + +The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices +are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the +mapping is reversed from when they are behind a PCIe switch. + +This patch still needs some review and clarification before going +upstream. +--- + drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++- + 1 file changed, 20 insertions(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-designware.c ++++ b/drivers/pci/host/pcie-designware.c +@@ -739,7 +739,26 @@ static int dw_pcie_map_irq(const struct + { + struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); + +- return pp->irq; ++ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */ ++ if ( dev->bus && dev->bus->self ++ && (dev->bus->self->vendor == 0x104c) ++ && (dev->bus->self->device == 0x8240)) { ++ switch (pin) { ++ case 1: return pp->irq - 3; ++ case 2: return pp->irq - 2; ++ case 3: return pp->irq - 1; ++ case 4: return pp->irq; ++ default: return -1; ++ } ++ } else { ++ switch (pin) { ++ case 1: return pp->irq; ++ case 2: return pp->irq - 1; ++ case 3: return pp->irq - 2; ++ case 4: return pp->irq - 3; ++ default: return -1; ++ } ++ } + } + + static void dw_pcie_add_bus(struct pci_bus *bus) |