diff options
7 files changed, 142 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts new file mode 100644 index 0000000000..b32d38a697 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-95x.dtsi" + +/ { + compatible = "mikrotik,routerboard-952ui-5ac2nd", "qca,qca9533"; + model = "MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)"; +}; + +&pcie0 { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + }; +}; + diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi new file mode 100644 index 0000000000..79c9f44d32 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-running = &led_user; + led-upgrade = &led_user; + }; + + leds { + compatible = "gpio-leds"; + + led_user: user { + label = "green:user"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + + port1 { + label = "green:port1"; + gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>; + }; + + port2 { + label = "green:port2"; + gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>; + }; + + port3 { + label = "green:port3"; + gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>; + }; + + port4 { + label = "green:port4"; + gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>; + }; + + port5 { + label = "green:port5"; + gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-export { + compatible = "gpio-export"; + + usb_power { + gpio-export,name = "usb-power"; + gpio-export,output = <1>; + gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>; + }; + + enable_poe_port5 { + gpio-export,name = "enable-poe:port5"; + gpio-export,output = <0>; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pin_spi_cs1>; + + gpio_ext: gpio_ext@1 { + compatible = "fairchild,74hc595"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <25000000>; + }; +}; + + +&pinmux { + pin_spi_cs1: pinmux_spi_cs1 { + pinctrl-single,bits = <0x8 0x0a000000 0xff000000>; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index 30c1761134..869c466278 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -38,6 +38,16 @@ define Device/mikrotik_routerboard-922uags-5hpacd endef TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd +define Device/mikrotik_routerboard-952ui-5ac2nd + $(Device/mikrotik_nor) + SOC := qca9533 + DEVICE_MODEL := RouterBOARD 952Ui-5ac2nD (hAP ac lite) + DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct + IMAGE_SIZE := 16256k + SUPPORTED_DEVICES += rb-952ui-5ac2nd +endef +TARGET_DEVICES += mikrotik_routerboard-952ui-5ac2nd + define Device/mikrotik_routerboard-962uigs-5hact2hnt $(Device/mikrotik_nor) SOC := qca9558 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index f5b927ea96..baf6d00412 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -6,6 +6,13 @@ board_config_update board=$(board_name) case "$board" in +mikrotik,routerboard-952ui-5ac2nd) + ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1" + ucidef_set_led_switch "port2" "port2" "green:port2" "switch0" "0x10" + ucidef_set_led_switch "port3" "port3" "green:port3" "switch0" "0x08" + ucidef_set_led_switch "port4" "port4" "green:port4" "switch0" "0x04" + ucidef_set_led_switch "port5" "port5" "green:port5" "switch0" "0x02" + ;; mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-wap-2nd) diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 999ce0dd99..9417e839e4 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -24,6 +24,11 @@ ath79_setup_interfaces() mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" ;; + mikrotik,routerboard-952ui-5ac2nd) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" + ;; mikrotik,routerboard-962uigs-5hact2hnt) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 800ce11d51..b5651f15e8 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -35,6 +35,9 @@ case "$FIRMWARE" in mikrotik,routerboard-wap-g-5hact2hnd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2) ;; + mikrotik,routerboard-952ui-5ac2nd) + caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 6) + ;; mikrotik,routerboard-962uigs-5hact2hnt) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7) ;; diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 77cd47f6a0..32fc4a6f6d 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -12,6 +12,7 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in mikrotik,routerboard-921gs-5hpacd-15s|\ + mikrotik,routerboard-952ui-5ac2nd|\ mikrotik,routerboard-962uigs-5hact2hnt|\ mikrotik,routerboard-wap-g-5hact2hnd) caldata_sysfsload_from_file $wlan_data 0x5000 0x844 |