diff options
| -rw-r--r-- | target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts index 0b1ca26ba4..514e9cc354 100644 --- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts @@ -23,20 +23,20 @@ reset { label = "reset"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; + linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; + linux,code = <KEY_WPS_BUTTON>; }; }; leds { compatible = "gpio-leds"; - led_power_green: power { + led_power_green: power_green { label = "dir-810l:green:power"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; @@ -46,7 +46,7 @@ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - power2 { + power_orange { label = "dir-810l:orange:power"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; @@ -56,7 +56,7 @@ &spi0 { status = "okay"; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -119,7 +119,7 @@ &state_default { gpio { - ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf"; + ralink,group = "i2c", "uartf"; ralink,function = "gpio"; }; }; @@ -130,9 +130,10 @@ }; &gsw { - mediatek,port4 = "ephy"; pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; + + mediatek,port4 = "ephy"; }; &pcie { @@ -140,9 +141,10 @@ }; &wmac { - ralink,mtd-eeprom = <&factory 0x0>; pinctrl-names = "default"; pinctrl-0 = <&pa_pins>; + + ralink,mtd-eeprom = <&factory 0x0>; mtd-mac-address = <&factory 0x28>; }; |