diff options
40 files changed, 7053 insertions, 0 deletions
diff --git a/target/linux/ath79/config-4.19 b/target/linux/ath79/config-4.19 new file mode 100644 index 0000000000..6cdbb968c3 --- /dev/null +++ b/target/linux/ath79/config-4.19 @@ -0,0 +1,229 @@ +CONFIG_AG71XX=y +# CONFIG_AG71XX_DEBUG is not set +CONFIG_AG71XX_DEBUG_FS=y +CONFIG_AR8216_PHY=y +CONFIG_AR8216_PHY_LEDS=y +CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MMAP_RND_BITS_MAX=15 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ATH79=y +CONFIG_ATH79_WDT=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_COMMON_CLK=y +# CONFIG_COMMON_CLK_BOSTON is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_RIXI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y +CONFIG_DMA_NONCOHERENT_MMAP=y +CONFIG_DMA_NONCOHERENT_OPS=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_LIB_ASHLDI3=y +CONFIG_GENERIC_LIB_ASHRDI3=y +CONFIG_GENERIC_LIB_CMPDI2=y +CONFIG_GENERIC_LIB_LSHRDI3=y +CONFIG_GENERIC_LIB_UCMPDI2=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_74X164=y +CONFIG_GPIO_ATH79=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_COMPILER_H=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_HAS_PCI=y +CONFIG_HZ_PERIODIC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_RESET is not set +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_GPIO=y +CONFIG_MEMFD_CREATE=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGRATION=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CBPF_JIT=y +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set +# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set +# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_MIPS_CMDLINE_FROM_DTB=y +# CONFIG_MIPS_ELF_APPENDED_DTB is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_NO_APPENDED_DTB is not set +CONFIG_MIPS_RAW_APPENDED_DTB=y +CONFIG_MIPS_SPRAM=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_PARSER_CYBERTAN=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_LZMA_FW=y +CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_TPLINK_PARTS=y +CONFIG_MTD_VIRT_CONCAT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +# CONFIG_PHY_AR7100_USB is not set +# CONFIG_PHY_AR7200_USB is not set +# CONFIG_PHY_ATH79_USB is not set +CONFIG_PINCTRL=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_RESET_ATH79=y +CONFIG_RESET_CONTROLLER=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_AR933X=y +CONFIG_SERIAL_AR933X_CONSOLE=y +CONFIG_SERIAL_AR933X_NR_UARTS=2 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_ATH79=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +# CONFIG_SPI_RB4XX is not set +CONFIG_SRCU=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y diff --git a/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch b/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch new file mode 100644 index 0000000000..36234d8d83 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch @@ -0,0 +1,32 @@ +From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Mon, 5 Mar 2018 11:41:25 +0100 +Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout + +If the userland tries to set a timeout higher than the max_timeout, +then we should fallback to max_timeout. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/watchdog/ath79_wdt.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/watchdog/ath79_wdt.c ++++ b/drivers/watchdog/ath79_wdt.c +@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi + + static int ath79_wdt_set_timeout(int val) + { +- if (val < 1 || val > max_timeout) ++ if (val < 1) + return -EINVAL; + +- timeout = val; ++ if (val > max_timeout) ++ timeout = max_timeout; ++ else ++ timeout = val; ++ + ath79_wdt_keepalive(); + + return 0; diff --git a/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch new file mode 100644 index 0000000000..b909d57fce --- /dev/null +++ b/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch @@ -0,0 +1,186 @@ +From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 10:03:03 +0100 +Subject: [PATCH 03/27] leds: add reset-controller based driver + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/leds/Kconfig | 11 ++++ + drivers/leds/Makefile | 1 + + drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 149 insertions(+) + create mode 100644 drivers/leds/leds-reset.c + +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -756,6 +756,17 @@ config LEDS_NIC78BX + To compile this driver as a module, choose M here: the module + will be called leds-nic78bx. + ++config LEDS_RESET ++ tristate "LED support for reset-controller API" ++ depends on LEDS_CLASS ++ depends on RESET_CONTROLLER ++ help ++ This option enables support for LEDs connected to pins driven by reset ++ controllers. Yes, DNI actual built HW like that. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called leds-reset. ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- /dev/null ++++ b/drivers/leds/leds-reset.c +@@ -0,0 +1,140 @@ ++/* ++ * Copyright (C) 2018 John Crispin <john@phrozen.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#include <linux/err.h> ++#include <linux/reset.h> ++#include <linux/kernel.h> ++#include <linux/leds.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/reset.h> ++ ++struct reset_led_data { ++ struct led_classdev cdev; ++ struct reset_control *rst; ++}; ++ ++static inline struct reset_led_data * ++ cdev_to_reset_led_data(struct led_classdev *led_cdev) ++{ ++ return container_of(led_cdev, struct reset_led_data, cdev); ++} ++ ++static void reset_led_set(struct led_classdev *led_cdev, ++ enum led_brightness value) ++{ ++ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev); ++ ++ if (value == LED_OFF) ++ reset_control_assert(led_dat->rst); ++ else ++ reset_control_deassert(led_dat->rst); ++} ++ ++struct reset_leds_priv { ++ int num_leds; ++ struct reset_led_data leds[]; ++}; ++ ++static inline int sizeof_reset_leds_priv(int num_leds) ++{ ++ return sizeof(struct reset_leds_priv) + ++ (sizeof(struct reset_led_data) * num_leds); ++} ++ ++static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fwnode_handle *child; ++ struct reset_leds_priv *priv; ++ int count, ret; ++ ++ count = device_get_child_node_count(dev); ++ if (!count) ++ return ERR_PTR(-ENODEV); ++ ++ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL); ++ if (!priv) ++ return ERR_PTR(-ENOMEM); ++ ++ device_for_each_child_node(dev, child) { ++ struct reset_led_data *led = &priv->leds[priv->num_leds]; ++ struct device_node *np = to_of_node(child); ++ ++ ret = fwnode_property_read_string(child, "label", &led->cdev.name); ++ if (!led->cdev.name) { ++ fwnode_handle_put(child); ++ return ERR_PTR(-EINVAL); ++ } ++ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0); ++ if (IS_ERR(led->rst)) ++ return ERR_PTR(-EINVAL); ++ ++ fwnode_property_read_string(child, "linux,default-trigger", ++ &led->cdev.default_trigger); ++ ++ led->cdev.brightness_set = reset_led_set; ++ ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev); ++ if (ret < 0) ++ return ERR_PTR(ret); ++ led->cdev.dev->of_node = np; ++ priv->num_leds++; ++ } ++ ++ return priv; ++} ++ ++static const struct of_device_id of_reset_leds_match[] = { ++ { .compatible = "reset-leds", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_reset_leds_match); ++ ++static int reset_led_probe(struct platform_device *pdev) ++{ ++ struct reset_leds_priv *priv; ++ ++ priv = reset_leds_create(pdev); ++ if (IS_ERR(priv)) ++ return PTR_ERR(priv); ++ ++ platform_set_drvdata(pdev, priv); ++ ++ return 0; ++} ++ ++static void reset_led_shutdown(struct platform_device *pdev) ++{ ++ struct reset_leds_priv *priv = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i = 0; i < priv->num_leds; i++) { ++ struct reset_led_data *led = &priv->leds[i]; ++ ++ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN)) ++ reset_led_set(&led->cdev, LED_OFF); ++ } ++} ++ ++static struct platform_driver reset_led_driver = { ++ .probe = reset_led_probe, ++ .shutdown = reset_led_shutdown, ++ .driver = { ++ .name = "leds-reset", ++ .of_match_table = of_reset_leds_match, ++ }, ++}; ++ ++module_platform_driver(reset_led_driver); ++ ++MODULE_AUTHOR("John Crispin <john@phrozen.org>"); ++MODULE_DESCRIPTION("reset controller LED driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:leds-reset"); +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt632 + obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o + obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o + obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o ++obj-$(CONFIG_LEDS_RESET) += leds-reset.o + + # LED SPI Drivers + obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch new file mode 100644 index 0000000000..6280baf913 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch @@ -0,0 +1,320 @@ +From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 10:04:05 +0100 +Subject: [PATCH 04/27] phy: add ath79 usb phys + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/phy/Kconfig | 16 ++++++ + drivers/phy/Makefile | 2 + + drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++ + drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++ + 4 files changed, 250 insertions(+) + create mode 100644 drivers/phy/phy-ar7100-usb.c + create mode 100644 drivers/phy/phy-ar7200-usb.c + +--- a/drivers/phy/Kconfig ++++ b/drivers/phy/Kconfig +@@ -15,6 +15,22 @@ config GENERIC_PHY + phy users can obtain reference to the PHY. All the users of this + framework should select this config. + ++config PHY_AR7100_USB ++ tristate "Atheros AR7100 USB PHY driver" ++ depends on ATH79 || COMPILE_TEST ++ default y if USB_EHCI_HCD_PLATFORM ++ select PHY_SIMPLE ++ help ++ Enable this to support the USB PHY on Atheros AR7100 SoCs. ++ ++config PHY_AR7200_USB ++ tristate "Atheros AR7200 USB PHY driver" ++ depends on ATH79 || COMPILE_TEST ++ default y if USB_EHCI_HCD_PLATFORM ++ select PHY_SIMPLE ++ help ++ Enable this to support the USB PHY on Atheros AR7200 SoCs. ++ + config PHY_LPC18XX_USB_OTG + tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) +--- a/drivers/phy/Makefile ++++ b/drivers/phy/Makefile +@@ -4,6 +4,8 @@ + # + + obj-$(CONFIG_GENERIC_PHY) += phy-core.o ++obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o ++obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o + obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o + obj-$(CONFIG_PHY_XGENE) += phy-xgene.o + obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +--- /dev/null ++++ b/drivers/phy/phy-ar7100-usb.c +@@ -0,0 +1,140 @@ ++/* ++ * Copyright (C) 2018 John Crispin <john@phrozen.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/phy/phy.h> ++#include <linux/delay.h> ++#include <linux/reset.h> ++#include <linux/of_gpio.h> ++ ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++struct ar7100_usb_phy { ++ struct reset_control *rst_phy; ++ struct reset_control *rst_host; ++ struct reset_control *rst_ohci_dll; ++ void __iomem *io_base; ++ struct phy *phy; ++ int gpio; ++}; ++ ++static int ar7100_usb_phy_power_off(struct phy *phy) ++{ ++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ err |= reset_control_assert(priv->rst_host); ++ err |= reset_control_assert(priv->rst_phy); ++ err |= reset_control_assert(priv->rst_ohci_dll); ++ ++ return err; ++} ++ ++static int ar7100_usb_phy_power_on(struct phy *phy) ++{ ++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ err |= ar7100_usb_phy_power_off(phy); ++ mdelay(100); ++ err |= reset_control_deassert(priv->rst_ohci_dll); ++ err |= reset_control_deassert(priv->rst_phy); ++ err |= reset_control_deassert(priv->rst_host); ++ mdelay(500); ++ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG); ++ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ); ++ ++ return err; ++} ++ ++static const struct phy_ops ar7100_usb_phy_ops = { ++ .power_on = ar7100_usb_phy_power_on, ++ .power_off = ar7100_usb_phy_power_off, ++ .owner = THIS_MODULE, ++}; ++ ++static int ar7100_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct phy_provider *phy_provider; ++ struct resource *res; ++ struct ar7100_usb_phy *priv; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ priv->io_base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->io_base)) ++ return PTR_ERR(priv->io_base); ++ ++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); ++ if (IS_ERR(priv->rst_phy)) { ++ dev_err(&pdev->dev, "phy reset is missing\n"); ++ return PTR_ERR(priv->rst_phy); ++ } ++ ++ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host"); ++ if (IS_ERR(priv->rst_host)) { ++ dev_err(&pdev->dev, "host reset is missing\n"); ++ return PTR_ERR(priv->rst_host); ++ } ++ ++ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll"); ++ if (IS_ERR(priv->rst_ohci_dll)) { ++ dev_err(&pdev->dev, "ohci-dll reset is missing\n"); ++ return PTR_ERR(priv->rst_host); ++ } ++ ++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops); ++ if (IS_ERR(priv->phy)) { ++ dev_err(&pdev->dev, "failed to create PHY\n"); ++ return PTR_ERR(priv->phy); ++ } ++ ++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); ++ if (priv->gpio >= 0) { ++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); ++ ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request gpio\n"); ++ return ret; ++ } ++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); ++ gpio_set_value(priv->gpio, 1); ++ } ++ ++ phy_set_drvdata(priv->phy, priv); ++ ++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); ++ ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static const struct of_device_id ar7100_usb_phy_of_match[] = { ++ { .compatible = "qca,ar7100-usb-phy" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match); ++ ++static struct platform_driver ar7100_usb_phy_driver = { ++ .probe = ar7100_usb_phy_probe, ++ .driver = { ++ .of_match_table = ar7100_usb_phy_of_match, ++ .name = "ar7100-usb-phy", ++ } ++}; ++module_platform_driver(ar7100_usb_phy_driver); ++ ++MODULE_DESCRIPTION("ATH79 USB PHY driver"); ++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/phy/phy-ar7200-usb.c +@@ -0,0 +1,123 @@ ++/* ++ * Copyright (C) 2015 Alban Bedel <albeu@free.fr> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/phy/phy.h> ++#include <linux/reset.h> ++#include <linux/of_gpio.h> ++ ++struct ar7200_usb_phy { ++ struct reset_control *rst_phy; ++ struct reset_control *suspend_override; ++ struct phy *phy; ++ int gpio; ++}; ++ ++static int ar7200_usb_phy_power_on(struct phy *phy) ++{ ++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ if (priv->rst_phy) ++ err = reset_control_deassert(priv->rst_phy); ++ if (!err && priv->suspend_override) ++ err = reset_control_assert(priv->suspend_override); ++ if (err && priv->rst_phy) ++ err = reset_control_assert(priv->rst_phy); ++ ++ return err; ++} ++ ++static int ar7200_usb_phy_power_off(struct phy *phy) ++{ ++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ if (priv->suspend_override) ++ err = reset_control_deassert(priv->suspend_override); ++ if (priv->rst_phy) ++ err |= reset_control_assert(priv->rst_phy); ++ ++ return err; ++} ++ ++static const struct phy_ops ar7200_usb_phy_ops = { ++ .power_on = ar7200_usb_phy_power_on, ++ .power_off = ar7200_usb_phy_power_off, ++ .owner = THIS_MODULE, ++}; ++ ++static int ar7200_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct phy_provider *phy_provider; ++ struct ar7200_usb_phy *priv; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); ++ if (IS_ERR(priv->rst_phy)) { ++ dev_err(&pdev->dev, "phy reset is missing\n"); ++ return PTR_ERR(priv->rst_phy); ++ } ++ ++ priv->suspend_override = devm_reset_control_get_optional( ++ &pdev->dev, "usb-suspend-override"); ++ if (IS_ERR(priv->suspend_override)) { ++ if (PTR_ERR(priv->suspend_override) == -ENOENT) ++ priv->suspend_override = NULL; ++ else ++ return PTR_ERR(priv->suspend_override); ++ } ++ ++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops); ++ if (IS_ERR(priv->phy)) { ++ dev_err(&pdev->dev, "failed to create PHY\n"); ++ return PTR_ERR(priv->phy); ++ } ++ ++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); ++ if (priv->gpio >= 0) { ++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); ++ ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request gpio\n"); ++ return ret; ++ } ++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); ++ gpio_set_value(priv->gpio, 1); ++ } ++ ++ phy_set_drvdata(priv->phy, priv); ++ ++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static const struct of_device_id ar7200_usb_phy_of_match[] = { ++ { .compatible = "qca,ar7200-usb-phy" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match); ++ ++static struct platform_driver ar7200_usb_phy_driver = { ++ .probe = ar7200_usb_phy_probe, ++ .driver = { ++ .of_match_table = ar7200_usb_phy_of_match, ++ .name = "ar7200-usb-phy", ++ } ++}; ++module_platform_driver(ar7200_usb_phy_driver); ++ ++MODULE_DESCRIPTION("ATH79 USB PHY driver"); ++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch new file mode 100644 index 0000000000..52d77c805c --- /dev/null +++ b/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch @@ -0,0 +1,24 @@ +From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 10:01:43 +0100 +Subject: [PATCH 05/27] usb: add more OF/quirk properties + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/usb/host/ehci-platform.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -161,6 +161,11 @@ static int ehci_platform_probe(struct pl + ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { ++ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset); ++ ++ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug")) ++ pdata->has_synopsys_hc_bug = 1; ++ + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ehci->big_endian_mmio = 1; + diff --git a/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch new file mode 100644 index 0000000000..bd26107af5 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch @@ -0,0 +1,168 @@ +From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 09:55:13 +0100 +Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for + QCA9556 SoCs + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/irqchip/Makefile | 1 + + drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++ + 2 files changed, 143 insertions(+) + create mode 100644 drivers/irqchip/irq-ath79-intc.c + +--- a/drivers/irqchip/Makefile ++++ b/drivers/irqchip/Makefile +@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o + + obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o + obj-$(CONFIG_ATH79) += irq-ath79-cpu.o ++obj-$(CONFIG_ATH79) += irq-ath79-intc.o + obj-$(CONFIG_ATH79) += irq-ath79-misc.o + obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o + obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o +--- /dev/null ++++ b/drivers/irqchip/irq-ath79-intc.c +@@ -0,0 +1,142 @@ ++/* ++ * Atheros AR71xx/AR724x/AR913x specific interrupt handling ++ * ++ * Copyright (C) 2018 John Crispin <john@phrozen.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/interrupt.h> ++#include <linux/irqchip.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/irqdomain.h> ++ ++#include <asm/irq_cpu.h> ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#define ATH79_MAX_INTC_CASCADE 3 ++ ++struct ath79_intc { ++ struct irq_chip chip; ++ u32 irq; ++ u32 pending_mask; ++ u32 int_status; ++ u32 irq_mask[ATH79_MAX_INTC_CASCADE]; ++ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE]; ++}; ++ ++static void ath79_intc_irq_handler(struct irq_desc *desc) ++{ ++ struct irq_domain *domain = irq_desc_get_handler_data(desc); ++ struct ath79_intc *intc = domain->host_data; ++ u32 pending; ++ ++ pending = ath79_reset_rr(intc->int_status); ++ pending &= intc->pending_mask; ++ ++ if (pending) { ++ int i; ++ ++ for (i = 0; i < domain->hwirq_max; i++) ++ if (pending & intc->irq_mask[i]) { ++ if (intc->irq_wb_chan[i] != 0xffffffff) ++ ath79_ddr_wb_flush(intc->irq_wb_chan[i]); ++ generic_handle_irq(irq_find_mapping(domain, i)); ++ } ++ } else { ++ spurious_interrupt(); ++ } ++} ++ ++static void ath79_intc_irq_enable(struct irq_data *d) ++{ ++ struct ath79_intc *intc = d->domain->host_data; ++ enable_irq(intc->irq); ++} ++ ++static void ath79_intc_irq_disable(struct irq_data *d) ++{ ++ struct ath79_intc *intc = d->domain->host_data; ++ disable_irq(intc->irq); ++} ++ ++static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ath79_intc *intc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ath79_irq_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ath79_intc_map, ++}; ++ ++static int __init ath79_intc_of_init( ++ struct device_node *node, struct device_node *parent) ++{ ++ struct irq_domain *domain; ++ struct ath79_intc *intc; ++ int cnt, cntwb, i, err; ++ ++ cnt = of_property_count_u32_elems(node, "qca,pending-bits"); ++ if (cnt > ATH79_MAX_INTC_CASCADE) ++ panic("Too many INTC pending bits\n"); ++ ++ intc = kzalloc(sizeof(*intc), GFP_KERNEL); ++ if (!intc) ++ panic("Failed to allocate INTC memory\n"); ++ intc->chip = dummy_irq_chip; ++ intc->chip.name = "INTC"; ++ intc->chip.irq_disable = ath79_intc_irq_disable; ++ intc->chip.irq_enable = ath79_intc_irq_enable; ++ ++ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) { ++ panic("Missing address of interrupt status register\n"); ++ } ++ ++ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt); ++ for (i = 0; i < cnt; i++) { ++ intc->pending_mask |= intc->irq_mask[i]; ++ intc->irq_wb_chan[i] = 0xffffffff; ++ } ++ ++ cntwb = of_count_phandle_with_args( ++ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells"); ++ ++ for (i = 0; i < cntwb; i++) { ++ struct of_phandle_args args; ++ u32 irq = i; ++ ++ of_property_read_u32_index( ++ node, "qca,ddr-wb-channel-interrupts", i, &irq); ++ if (irq >= ATH79_MAX_INTC_CASCADE) ++ continue; ++ ++ err = of_parse_phandle_with_args( ++ node, "qca,ddr-wb-channels", ++ "#qca,ddr-wb-channel-cells", ++ i, &args); ++ if (err) ++ return err; ++ ++ intc->irq_wb_chan[irq] = args.args[0]; ++ } ++ ++ intc->irq = irq_of_parse_and_map(node, 0); ++ if (!intc->irq) ++ panic("Failed to get INTC IRQ"); ++ ++ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc); ++ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain); ++ ++ return 0; ++} ++IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc", ++ ath79_intc_of_init); diff --git a/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch new file mode 100644 index 0000000000..b5ad731d06 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch @@ -0,0 +1,23 @@ +From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 09:58:19 +0100 +Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/irqchip/irq-ath79-cpu.c | 7 ------- + 1 file changed, 7 deletions(-) + +--- a/drivers/irqchip/irq-ath79-cpu.c ++++ b/drivers/irqchip/irq-ath79-cpu.c +@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init( + } + IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc", + ar79_cpu_intc_of_init); +- +-void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3) +-{ +- irq_wb_chan[2] = irq_wb_chan2; +- irq_wb_chan[3] = irq_wb_chan3; +- mips_cpu_irq_init(); +-} diff --git a/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch b/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch new file mode 100644 index 0000000000..05db5060b1 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch @@ -0,0 +1,24 @@ +From 0c8856211d26f84277f7fcb0b9595e5c646bc464 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Tue, 6 Mar 2018 10:00:55 +0100 +Subject: [PATCH 11/33] MIPS: ath79: select the PINCTRL subsystem + +The pinmux on QCA SoCs is controlled by a single register. The +"pinctrl-single" driver can be used but requires the target +to select PINCTRL. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -288,6 +288,7 @@ config BCM63XX + select SYS_HAS_EARLY_PRINTK + select SWAP_IO_SPACE + select GPIOLIB ++ select PINCTRL + select HAVE_CLK + select MIPS_L1_CACHE_SHIFT_4 + select CLKDEV_LOOKUP diff --git a/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch new file mode 100644 index 0000000000..bf7eb691a5 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch @@ -0,0 +1,57 @@ +From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Mon, 25 Jun 2018 15:52:10 +0200 +Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc + +With the driver being converted from platform_data to pure OF, we need to +also add some docs. + +Cc: Rob Herring <robh+dt@kernel.org> +Cc: devicetree@vger.kernel.org +Signed-off-by: John Crispin <john@phrozen.org> +--- + .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt +@@ -0,0 +1,38 @@ ++* Qualcomm Atheros AR7100 PCI express root complex ++ ++Required properties: ++- compatible: should contain "qcom,ar7100-pci" to identify the core. ++- reg: Should contain the register ranges as listed in the reg-names property. ++- reg-names: Definition: Must include the following entries ++ - "cfg_base" IO Memory ++- #address-cells: set to <3> ++- #size-cells: set to <2> ++- ranges: ranges for the PCI memory and I/O regions ++- interrupt-map-mask and interrupt-map: standard PCI ++ properties to define the mapping of the PCIe interface to interrupt ++ numbers. ++- #interrupt-cells: set to <1> ++- interrupt-controller: define to enable the builtin IRQ cascade. ++ ++Optional properties: ++- interrupt-parent: phandle to the MIPS IRQ controller ++ ++* Example for ar7100 ++ pcie-controller@180c0000 { ++ compatible = "qca,ar7100-pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ bus-range = <0x0 0x0>; ++ reg = <0x17010000 0x100>; ++ reg-names = "cfg_base"; ++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 ++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>; ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-map-mask = <0 0 0 1>; ++ interrupt-map = <0 0 0 0 &pcie0 0>; ++ }; diff --git a/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch new file mode 100644 index 0000000000..91796a12f0 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch @@ -0,0 +1,202 @@ +From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:07:23 +0200 +Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF + +With the ath79 target getting converted to pure OF, we can drop all the +platform data code and add the missing OF bits to the driver. We also add +a irq domain for the PCI/e controllers cascade, thus making it usable from +dts files. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++----------------------- + 1 file changed, 41 insertions(+), 41 deletions(-) + +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -18,8 +18,11 @@ + #include <linux/pci.h> + #include <linux/pci_regs.h> + #include <linux/interrupt.h> ++#include <linux/irqchip/chained_irq.h> + #include <linux/init.h> + #include <linux/platform_device.h> ++#include <linux/of_irq.h> ++#include <linux/of_pci.h> + + #include <asm/mach-ath79/ar71xx_regs.h> + #include <asm/mach-ath79/ath79.h> +@@ -49,12 +52,13 @@ + #define AR71XX_PCI_IRQ_COUNT 5 + + struct ar71xx_pci_controller { ++ struct device_node *np; + void __iomem *cfg_base; + int irq; +- int irq_base; + struct pci_controller pci_ctrl; + struct resource io_res; + struct resource mem_res; ++ struct irq_domain *domain; + }; + + /* Byte lane enable bits */ +@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = { + + static void ar71xx_pci_irq_handler(struct irq_desc *desc) + { +- struct ar71xx_pci_controller *apc; + void __iomem *base = ath79_reset_base; ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc); + u32 pending; + +- apc = irq_desc_get_handler_data(desc); +- ++ chained_irq_enter(chip, desc); + pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & + __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + + if (pending & AR71XX_PCI_INT_DEV0) +- generic_handle_irq(apc->irq_base + 0); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); + + else if (pending & AR71XX_PCI_INT_DEV1) +- generic_handle_irq(apc->irq_base + 1); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 2)); + + else if (pending & AR71XX_PCI_INT_DEV2) +- generic_handle_irq(apc->irq_base + 2); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 3)); + + else if (pending & AR71XX_PCI_INT_CORE) +- generic_handle_irq(apc->irq_base + 4); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 4)); + + else + spurious_interrupt(); ++ chained_irq_exit(chip, desc); + } + + static void ar71xx_pci_irq_unmask(struct irq_data *d) +@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct + u32 t; + + apc = irq_data_get_irq_chip_data(d); +- irq = d->irq - apc->irq_base; ++ irq = irq_linear_revmap(apc->domain, d->irq); + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i + u32 t; + + apc = irq_data_get_irq_chip_data(d); +- irq = d->irq - apc->irq_base; ++ irq = irq_linear_revmap(apc->domain, d->irq); + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +@@ -294,24 +299,31 @@ static struct irq_chip ar71xx_pci_irq_ch + .irq_mask_ack = ar71xx_pci_irq_mask, + }; + ++static int ar71xx_pci_irq_map(struct irq_domain *d, ++ unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ar71xx_pci_controller *apc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq); ++ irq_set_chip_data(irq, apc); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ar71xx_pci_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ar71xx_pci_irq_map, ++}; ++ + static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) + { + void __iomem *base = ath79_reset_base; +- int i; + + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); + +- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); +- +- apc->irq_base = ATH79_PCI_IRQ_BASE; +- for (i = apc->irq_base; +- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) { +- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, +- handle_level_irq); +- irq_set_chip_data(i, apc); +- } +- ++ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT, ++ &ar71xx_pci_domain_ops, apc); + irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler, + apc); + } +@@ -328,6 +340,11 @@ static void ar71xx_pci_reset(void) + mdelay(100); + } + ++static const struct of_device_id ar71xx_pci_ids[] = { ++ { .compatible = "qca,ar7100-pci" }, ++ {}, ++}; ++ + static int ar71xx_pci_probe(struct platform_device *pdev) + { + struct ar71xx_pci_controller *apc; +@@ -348,26 +365,6 @@ static int ar71xx_pci_probe(struct platf + if (apc->irq < 0) + return -EINVAL; + +- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); +- if (!res) +- return -EINVAL; +- +- apc->io_res.parent = res; +- apc->io_res.name = "PCI IO space"; +- apc->io_res.start = res->start; +- apc->io_res.end = res->end; +- apc->io_res.flags = IORESOURCE_IO; +- +- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); +- if (!res) +- return -EINVAL; +- +- apc->mem_res.parent = res; +- apc->mem_res.name = "PCI memory space"; +- apc->mem_res.start = res->start; +- apc->mem_res.end = res->end; +- apc->mem_res.flags = IORESOURCE_MEM; +- + ar71xx_pci_reset(); + + /* setup COMMAND register */ +@@ -380,9 +377,11 @@ static int ar71xx_pci_probe(struct platf + + ar71xx_pci_irq_init(apc); + ++ apc->np = pdev->dev.of_node; + apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; + apc->pci_ctrl.mem_resource = &apc->mem_res; + apc->pci_ctrl.io_resource = &apc->io_res; ++ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node); + + register_pci_controller(&apc->pci_ctrl); + +@@ -393,6 +392,7 @@ static struct platform_driver ar71xx_pci + .probe = ar71xx_pci_probe, + .driver = { + .name = "ar71xx-pci", ++ .of_match_table = of_match_ptr(ar71xx_pci_ids), + }, + }; + diff --git a/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch new file mode 100644 index 0000000000..a0af79cb4d --- /dev/null +++ b/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch @@ -0,0 +1,61 @@ +From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Mon, 25 Jun 2018 15:52:02 +0200 +Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc + +With the driver being converted from platform_data to pure OF, we need to +also add some docs. + +Cc: Rob Herring <robh+dt@kernel.org> +Cc: devicetree@vger.kernel.org +Signed-off-by: John Crispin <john@phrozen.org> +--- + .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++ + 1 file changed, 42 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt +@@ -0,0 +1,42 @@ ++* Qualcomm Atheros AR724X PCI express root complex ++ ++Required properties: ++- compatible: should contain "qcom,ar7240-pci" to identify the core. ++- reg: Should contain the register ranges as listed in the reg-names property. ++- reg-names: Definition: Must include the following entries ++ - "crp_base" Configuration registers ++ - "ctrl_base" Control registers ++ - "cfg_base" IO Memory ++- #address-cells: set to <3> ++- #size-cells: set to <2> ++- ranges: ranges for the PCI memory and I/O regions ++- interrupt-map-mask and interrupt-map: standard PCI ++ properties to define the mapping of the PCIe interface to interrupt ++ numbers. ++- #interrupt-cells: set to <1> ++- interrupt-parent: phandle to the MIPS IRQ controller ++ ++Optional properties: ++- interrupt-controller: define to enable the builtin IRQ cascade. ++ ++* Example for qca9557 ++ pcie-controller@180c0000 { ++ compatible = "qcom,ar7240-pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ bus-range = <0x0 0x0>; ++ reg = <0x180c0000 0x1000>, ++ <0x180f0000 0x100>, ++ <0x14000000 0x1000>; ++ reg-names = "crp_base", "ctrl_base", "cfg_base"; ++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 ++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>; ++ interrupt-parent = <&intc2>; ++ interrupts = <1>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-map-mask = <0 0 0 1>; ++ interrupt-map = <0 0 0 0 &pcie0 0>; ++ }; diff --git a/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch new file mode 100644 index 0000000000..936bfd4816 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch @@ -0,0 +1,205 @@ +From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:07:37 +0200 +Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF + +With the ath79 target getting converted to pure OF, we can drop all the +platform data code and add the missing OF bits to the driver. We also add +a irq domain for the PCI/e controllers cascade, thus making it usable from +dts files. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------ + 1 file changed, 42 insertions(+), 46 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -14,8 +14,11 @@ + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/platform_device.h> ++#include <linux/irqchip/chained_irq.h> + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> ++#include <linux/of_irq.h> ++#include <linux/of_pci.h> + + #define AR724X_PCI_REG_APP 0x00 + #define AR724X_PCI_REG_RESET 0x18 +@@ -45,17 +48,20 @@ struct ar724x_pci_controller { + void __iomem *crp_base; + + int irq; +- int irq_base; + + bool link_up; + bool bar0_is_cached; + u32 bar0_value; + ++ struct device_node *np; + struct pci_controller pci_controller; ++ struct irq_domain *domain; + struct resource io_res; + struct resource mem_res; + }; + ++static struct irq_chip ar724x_pci_irq_chip; ++ + static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) + { + u32 reset; +@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = { + + static void ar724x_pci_irq_handler(struct irq_desc *desc) + { +- struct ar724x_pci_controller *apc; +- void __iomem *base; ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc); + u32 pending; + +- apc = irq_desc_get_handler_data(desc); +- base = apc->ctrl_base; +- +- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & +- __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ chained_irq_enter(chip, desc); ++ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) & ++ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK); + + if (pending & AR724X_PCI_INT_DEV0) +- generic_handle_irq(apc->irq_base + 0); +- ++ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); + else + spurious_interrupt(); ++ chained_irq_exit(chip, desc); + } + + static void ar724x_pci_irq_unmask(struct irq_data *d) + { + struct ar724x_pci_controller *apc; + void __iomem *base; +- int offset; + u32 t; + + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; +- offset = apc->irq_base - d->irq; + +- switch (offset) { ++ switch (irq_linear_revmap(apc->domain, d->irq)) { + case 0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t | AR724X_PCI_INT_DEV0, +@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i + { + struct ar724x_pci_controller *apc; + void __iomem *base; +- int offset; + u32 t; + + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; +- offset = apc->irq_base - d->irq; + +- switch (offset) { ++ switch (irq_linear_revmap(apc->domain, d->irq)) { + case 0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t & ~AR724X_PCI_INT_DEV0, +@@ -305,26 +305,34 @@ static struct irq_chip ar724x_pci_irq_ch + .irq_mask_ack = ar724x_pci_irq_mask, + }; + ++static int ar724x_pci_irq_map(struct irq_domain *d, ++ unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ar724x_pci_controller *apc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq); ++ irq_set_chip_data(irq, apc); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ar724x_pci_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ar724x_pci_irq_map, ++}; ++ + static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, + int id) + { + void __iomem *base; +- int i; + + base = apc->ctrl_base; + + __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); + __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); + +- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT); +- +- for (i = apc->irq_base; +- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) { +- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, +- handle_level_irq); +- irq_set_chip_data(i, apc); +- } +- ++ apc->domain = irq_domain_add_linear(apc->np, 2, ++ &ar724x_pci_domain_ops, apc); + irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler, + apc); + } +@@ -394,29 +402,11 @@ static int ar724x_pci_probe(struct platf + if (apc->irq < 0) + return -EINVAL; + +- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); +- if (!res) +- return -EINVAL; +- +- apc->io_res.parent = res; +- apc->io_res.name = "PCI IO space"; +- apc->io_res.start = res->start; +- apc->io_res.end = res->end; +- apc->io_res.flags = IORESOURCE_IO; +- +- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); +- if (!res) +- return -EINVAL; +- +- apc->mem_res.parent = res; +- apc->mem_res.name = "PCI memory space"; +- apc->mem_res.start = res->start; +- apc->mem_res.end = res->end; +- apc->mem_res.flags = IORESOURCE_MEM; +- ++ apc->np = pdev->dev.of_node; + apc->pci_controller.pci_ops = &ar724x_pci_ops; + apc->pci_controller.io_resource = &apc->io_res; + apc->pci_controller.mem_resource = &apc->mem_res; ++ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node); + + /* + * Do the full PCIE Root Complex Initialization Sequence if the PCIe +@@ -438,10 +428,16 @@ static int ar724x_pci_probe(struct platf + return 0; + } + ++static const struct of_device_id ar724x_pci_ids[] = { ++ { .compatible = "qcom,ar7240-pci" }, ++ {}, ++}; ++ + static struct platform_driver ar724x_pci_driver = { + .probe = ar724x_pci_probe, + .driver = { + .name = "ar724x-pci", ++ .of_match_table = of_match_ptr(ar724x_pci_ids), + }, + }; + diff --git a/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch b/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch new file mode 100644 index 0000000000..c273140dfc --- /dev/null +++ b/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch @@ -0,0 +1,243 @@ +From 288a8eb0d41f09fda242e05f8a7bd1f5b3489477 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:19:26 +0100 +Subject: [PATCH 21/33] MIPS: ath79: add helpers for setting clocks and expose + the ref clock + +Preparation for transitioning the legacy clock setup code over +to OF. + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 128 ++++++++++++++++++---------------- + include/dt-bindings/clock/ath79-clk.h | 3 +- + 2 files changed, 68 insertions(+), 63 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -37,20 +37,46 @@ static struct clk_onecell_data clk_data + .clk_num = ARRAY_SIZE(clks), + }; + +-static struct clk *__init ath79_add_sys_clkdev( +- const char *id, unsigned long rate) ++static const char * const clk_names[ATH79_CLK_END] = { ++ [ATH79_CLK_CPU] = "cpu", ++ [ATH79_CLK_DDR] = "ddr", ++ [ATH79_CLK_AHB] = "ahb", ++ [ATH79_CLK_REF] = "ref", ++}; ++ ++static const char * __init ath79_clk_name(int type) + { +- struct clk *clk; +- int err; ++ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]); ++ return clk_names[type]; ++} + +- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); ++static void __init __ath79_set_clk(int type, const char *name, struct clk *clk) ++{ + if (IS_ERR(clk)) +- panic("failed to allocate %s clock structure", id); ++ panic("failed to allocate %s clock structure", clk_names[type]); + +- err = clk_register_clkdev(clk, id, NULL); +- if (err) +- panic("unable to register %s clock device", id); ++ clks[type] = clk; ++ clk_register_clkdev(clk, name, NULL); ++} + ++static struct clk * __init ath79_set_clk(int type, unsigned long rate) ++{ ++ const char *name = ath79_clk_name(type); ++ struct clk *clk; ++ ++ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate); ++ __ath79_set_clk(type, name, clk); ++ return clk; ++} ++ ++static struct clk * __init ath79_set_ff_clk(int type, const char *parent, ++ unsigned int mult, unsigned int div) ++{ ++ const char *name = ath79_clk_name(type); ++ struct clk *clk; ++ ++ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div); ++ __ath79_set_clk(type, name, clk); + return clk; + } + +@@ -80,27 +106,15 @@ static void __init ar71xx_clocks_init(vo + div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; + ahb_rate = cpu_rate / div; + +- ath79_add_sys_clkdev("ref", ref_rate); +- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); +- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); +- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); ++ ath79_set_clk(ATH79_CLK_REF, ref_rate); ++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); ++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); ++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + + clk_add_alias("wdt", NULL, "ahb", NULL); + clk_add_alias("uart", NULL, "ahb", NULL); + } + +-static struct clk * __init ath79_reg_ffclk(const char *name, +- const char *parent_name, unsigned int mult, unsigned int div) +-{ +- struct clk *clk; +- +- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div); +- if (IS_ERR(clk)) +- panic("failed to allocate %s clock structure", name); +- +- return clk; +-} +- + static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) + { + u32 pll; +@@ -114,24 +128,19 @@ static void __init ar724x_clk_init(struc + ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; + ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; + +- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div); +- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div); +- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div); ++ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div); ++ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div); ++ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); + } + + static void __init ar724x_clocks_init(void) + { + struct clk *ref_clk; + +- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ); ++ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); + + ar724x_clk_init(ref_clk, ath79_pll_base); + +- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ +- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); +- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); +- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); +- + clk_add_alias("wdt", NULL, "ahb", NULL); + clk_add_alias("uart", NULL, "ahb", NULL); + } +@@ -186,12 +195,12 @@ static void __init ar9330_clk_init(struc + AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; + } + +- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", +- ninit_mul, ref_div * out_div * cpu_div); +- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", +- ninit_mul, ref_div * out_div * ddr_div); +- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", +- ninit_mul, ref_div * out_div * ahb_div); ++ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul, ++ ref_div * out_div * cpu_div); ++ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul, ++ ref_div * out_div * ddr_div); ++ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul, ++ ref_div * out_div * ahb_div); + } + + static void __init ar933x_clocks_init(void) +@@ -206,15 +215,10 @@ static void __init ar933x_clocks_init(vo + else + ref_rate = (25 * 1000 * 1000); + +- ref_clk = ath79_add_sys_clkdev("ref", ref_rate); ++ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); + + ar9330_clk_init(ref_clk, ath79_pll_base); + +- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ +- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); +- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); +- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); +- + clk_add_alias("wdt", NULL, "ahb", NULL); + clk_add_alias("uart", NULL, "ref", NULL); + } +@@ -344,10 +348,10 @@ static void __init ar934x_clocks_init(vo + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_add_sys_clkdev("ref", ref_rate); +- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); +- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); +- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); ++ ath79_set_clk(ATH79_CLK_REF, ref_rate); ++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); ++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); ++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + + clk_add_alias("wdt", NULL, "ref", NULL); + clk_add_alias("uart", NULL, "ref", NULL); +@@ -431,10 +435,10 @@ static void __init qca953x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_add_sys_clkdev("ref", ref_rate); +- ath79_add_sys_clkdev("cpu", cpu_rate); +- ath79_add_sys_clkdev("ddr", ddr_rate); +- ath79_add_sys_clkdev("ahb", ahb_rate); ++ ath79_set_clk(ATH79_CLK_REF, ref_rate); ++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); ++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); ++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + + clk_add_alias("wdt", NULL, "ref", NULL); + clk_add_alias("uart", NULL, "ref", NULL); +@@ -516,10 +520,10 @@ static void __init qca955x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_add_sys_clkdev("ref", ref_rate); +- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); +- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); +- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); ++ ath79_set_clk(ATH79_CLK_REF, ref_rate); ++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); ++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); ++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + + clk_add_alias("wdt", NULL, "ref", NULL); + clk_add_alias("uart", NULL, "ref", NULL); +@@ -620,10 +624,10 @@ static void __init qca956x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_add_sys_clkdev("ref", ref_rate); +- ath79_add_sys_clkdev("cpu", cpu_rate); +- ath79_add_sys_clkdev("ddr", ddr_rate); +- ath79_add_sys_clkdev("ahb", ahb_rate); ++ ath79_set_clk(ATH79_CLK_REF, ref_rate); ++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); ++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); ++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + + clk_add_alias("wdt", NULL, "ref", NULL); + clk_add_alias("uart", NULL, "ref", NULL); +--- a/include/dt-bindings/clock/ath79-clk.h ++++ b/include/dt-bindings/clock/ath79-clk.h +@@ -13,7 +13,8 @@ + #define ATH79_CLK_CPU 0 + #define ATH79_CLK_DDR 1 + #define ATH79_CLK_AHB 2 ++#define ATH79_CLK_REF 3 + +-#define ATH79_CLK_END 3 ++#define ATH79_CLK_END 4 + + #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch b/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch new file mode 100644 index 0000000000..389edc45a8 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch @@ -0,0 +1,114 @@ +From 339c191a95e978353c9ba3aafab0261e14de109b Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:22:43 +0100 +Subject: [PATCH 22/33] MIPS: ath79: move legacy "wdt" and "uart" clock aliases + out of soc init + +Preparation for reusing functions for DT + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 38 +++++++++++++++++--------------------- + 1 file changed, 17 insertions(+), 21 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -110,9 +110,6 @@ static void __init ar71xx_clocks_init(vo + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +- +- clk_add_alias("wdt", NULL, "ahb", NULL); +- clk_add_alias("uart", NULL, "ahb", NULL); + } + + static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) +@@ -140,9 +137,6 @@ static void __init ar724x_clocks_init(vo + ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); + + ar724x_clk_init(ref_clk, ath79_pll_base); +- +- clk_add_alias("wdt", NULL, "ahb", NULL); +- clk_add_alias("uart", NULL, "ahb", NULL); + } + + static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) +@@ -218,9 +212,6 @@ static void __init ar933x_clocks_init(vo + ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); + + ar9330_clk_init(ref_clk, ath79_pll_base); +- +- clk_add_alias("wdt", NULL, "ahb", NULL); +- clk_add_alias("uart", NULL, "ref", NULL); + } + + static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, +@@ -353,9 +344,6 @@ static void __init ar934x_clocks_init(vo + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + +- clk_add_alias("wdt", NULL, "ref", NULL); +- clk_add_alias("uart", NULL, "ref", NULL); +- + iounmap(dpll_base); + } + +@@ -439,9 +427,6 @@ static void __init qca953x_clocks_init(v + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +- +- clk_add_alias("wdt", NULL, "ref", NULL); +- clk_add_alias("uart", NULL, "ref", NULL); + } + + static void __init qca955x_clocks_init(void) +@@ -524,9 +509,6 @@ static void __init qca955x_clocks_init(v + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +- +- clk_add_alias("wdt", NULL, "ref", NULL); +- clk_add_alias("uart", NULL, "ref", NULL); + } + + static void __init qca956x_clocks_init(void) +@@ -628,13 +610,13 @@ static void __init qca956x_clocks_init(v + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +- +- clk_add_alias("wdt", NULL, "ref", NULL); +- clk_add_alias("uart", NULL, "ref", NULL); + } + + void __init ath79_clocks_init(void) + { ++ const char *wdt; ++ const char *uart; ++ + if (soc_is_ar71xx()) + ar71xx_clocks_init(); + else if (soc_is_ar724x() || soc_is_ar913x()) +@@ -651,6 +633,20 @@ void __init ath79_clocks_init(void) + qca956x_clocks_init(); + else + BUG(); ++ ++ if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) { ++ wdt = "ahb"; ++ uart = "ahb"; ++ } else if (soc_is_ar933x()) { ++ wdt = "ahb"; ++ uart = "ref"; ++ } else { ++ wdt = "ref"; ++ uart = "ref"; ++ } ++ ++ clk_add_alias("wdt", NULL, wdt, NULL); ++ clk_add_alias("uart", NULL, uart, NULL); + } + + unsigned long __init diff --git a/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch b/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch new file mode 100644 index 0000000000..6c0f2ad54c --- /dev/null +++ b/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch @@ -0,0 +1,242 @@ +From 6350b2c36c522fecbc91a80b63f49319dafd2a72 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:23:20 +0100 +Subject: [PATCH 23/33] MIPS: ath79: pass PLL base to clock init functions + +Preparation for passing the mapped base via DT + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++------------------------- + 1 file changed, 30 insertions(+), 30 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_ + return clk; + } + +-static void __init ar71xx_clocks_init(void) ++static void __init ar71xx_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; + unsigned long cpu_rate; +@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(vo + + ref_rate = AR71XX_BASE_FREQ; + +- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); ++ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG); + + div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1; + freq = div * ref_rate; +@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struc + ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); + } + +-static void __init ar724x_clocks_init(void) ++static void __init ar724x_clocks_init(void __iomem *pll_base) + { + struct clk *ref_clk; + + ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); + +- ar724x_clk_init(ref_clk, ath79_pll_base); ++ ar724x_clk_init(ref_clk, pll_base); + } + + static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) +@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struc + ref_div * out_div * ahb_div); + } + +-static void __init ar933x_clocks_init(void) ++static void __init ar933x_clocks_init(void __iomem *pll_base) + { + struct clk *ref_clk; + unsigned long ref_rate; +@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u3 + return ret; + } + +-static void __init ar934x_clocks_init(void) ++static void __init ar934x_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; + unsigned long cpu_rate; +@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(vo + AR934X_SRIF_DPLL1_REFDIV_MASK; + frac = 1 << 18; + } else { +- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG); ++ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG); + out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + AR934X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) & +@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(vo + AR934X_SRIF_DPLL1_REFDIV_MASK; + frac = 1 << 18; + } else { +- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG); ++ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG); + out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + AR934X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) & +@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(vo + ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint, + nfrac, frac, out_div); + +- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG); ++ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) & + AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK; +@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(vo + iounmap(dpll_base); + } + +-static void __init qca953x_clocks_init(void) ++static void __init qca953x_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; + unsigned long cpu_rate; +@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + +- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & +@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(v + cpu_pll += frac * (ref_rate >> 6) / ref_div; + cpu_pll /= (1 << out_div); + +- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG); + out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & +@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(v + ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); + ddr_pll /= (1 << out_div); + +- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); ++ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & + QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; +@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(v + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + } + +-static void __init qca955x_clocks_init(void) ++static void __init qca955x_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; + unsigned long cpu_rate; +@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + +- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) & +@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(v + cpu_pll += frac * ref_rate / (ref_div * (1 << 6)); + cpu_pll /= (1 << out_div); + +- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG); + out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) & +@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(v + ddr_pll += frac * ref_rate / (ref_div * (1 << 10)); + ddr_pll /= (1 << out_div); + +- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG); ++ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & + QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; +@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(v + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + } + +-static void __init qca956x_clocks_init(void) ++static void __init qca956x_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; + unsigned long cpu_rate; +@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + +- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & + QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; + +- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); ++ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG); + nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & + QCA956X_PLL_CPU_CONFIG1_NINT_MASK; + hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & +@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(v + cpu_pll += (hfrac >> 13) * ref_rate / ref_div; + cpu_pll /= (1 << out_div); + +- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); ++ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG); + out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & + QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; +- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); ++ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG); + nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & + QCA956X_PLL_DDR_CONFIG1_NINT_MASK; + hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & +@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(v + ddr_pll += (hfrac >> 13) * ref_rate / ref_div; + ddr_pll /= (1 << out_div); + +- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); ++ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & + QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; +@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void) + const char *uart; + + if (soc_is_ar71xx()) +- ar71xx_clocks_init(); ++ ar71xx_clocks_init(ath79_pll_base); + else if (soc_is_ar724x() || soc_is_ar913x()) +- ar724x_clocks_init(); ++ ar724x_clocks_init(ath79_pll_base); + else if (soc_is_ar933x()) +- ar933x_clocks_init(); ++ ar933x_clocks_init(ath79_pll_base); + else if (soc_is_ar934x()) +- ar934x_clocks_init(); ++ ar934x_clocks_init(ath79_pll_base); + else if (soc_is_qca953x()) +- qca953x_clocks_init(); ++ qca953x_clocks_init(ath79_pll_base); + else if (soc_is_qca955x()) +- qca955x_clocks_init(); ++ qca955x_clocks_init(ath79_pll_base); + else if (soc_is_qca956x() || soc_is_tp9343()) +- qca956x_clocks_init(); ++ qca956x_clocks_init(ath79_pll_base); + else + BUG(); + diff --git a/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch b/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch new file mode 100644 index 0000000000..9ceb643803 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch @@ -0,0 +1,229 @@ +From 5fadb2544ed0bb72ddddd846aa303bb9ed2d211c Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:24:07 +0100 +Subject: [PATCH 24/33] MIPS: ath79: make specifying the reference clock in DT + optional + +It can be autodetected for many SoCs using the strapping options. +If the clock is specified in DT, the autodetected value is ignored + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 84 +++++++++++++++++++++++-------------------------- + 1 file changed, 40 insertions(+), 44 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -80,6 +80,18 @@ static struct clk * __init ath79_set_ff_ + return clk; + } + ++static unsigned long __init ath79_setup_ref_clk(unsigned long rate) ++{ ++ struct clk *clk = clks[ATH79_CLK_REF]; ++ ++ if (clk) ++ rate = clk_get_rate(clk); ++ else ++ clk = ath79_set_clk(ATH79_CLK_REF, rate); ++ ++ return rate; ++} ++ + static void __init ar71xx_clocks_init(void __iomem *pll_base) + { + unsigned long ref_rate; +@@ -90,7 +102,7 @@ static void __init ar71xx_clocks_init(vo + u32 freq; + u32 div; + +- ref_rate = AR71XX_BASE_FREQ; ++ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ); + + pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG); + +@@ -106,16 +118,17 @@ static void __init ar71xx_clocks_init(vo + div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; + ahb_rate = cpu_rate / div; + +- ath79_set_clk(ATH79_CLK_REF, ref_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + } + +-static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) ++static void __init ar724x_clocks_init(void __iomem *pll_base) + { +- u32 pll; + u32 mult, div, ddr_div, ahb_div; ++ u32 pll; ++ ++ ath79_setup_ref_clk(AR71XX_BASE_FREQ); + + pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG); + +@@ -130,17 +143,9 @@ static void __init ar724x_clk_init(struc + ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); + } + +-static void __init ar724x_clocks_init(void __iomem *pll_base) +-{ +- struct clk *ref_clk; +- +- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); +- +- ar724x_clk_init(ref_clk, pll_base); +-} +- +-static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) ++static void __init ar933x_clocks_init(void __iomem *pll_base) + { ++ unsigned long ref_rate; + u32 clock_ctrl; + u32 ref_div; + u32 ninit_mul; +@@ -149,6 +154,15 @@ static void __init ar9330_clk_init(struc + u32 cpu_div; + u32 ddr_div; + u32 ahb_div; ++ u32 t; ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if (t & AR933X_BOOTSTRAP_REF_CLK_40) ++ ref_rate = (40 * 1000 * 1000); ++ else ++ ref_rate = (25 * 1000 * 1000); ++ ++ ath79_setup_ref_clk(ref_rate); + + clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG); + if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { +@@ -197,23 +211,6 @@ static void __init ar9330_clk_init(struc + ref_div * out_div * ahb_div); + } + +-static void __init ar933x_clocks_init(void __iomem *pll_base) +-{ +- struct clk *ref_clk; +- unsigned long ref_rate; +- u32 t; +- +- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); +- if (t & AR933X_BOOTSTRAP_REF_CLK_40) +- ref_rate = (40 * 1000 * 1000); +- else +- ref_rate = (25 * 1000 * 1000); +- +- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); +- +- ar9330_clk_init(ref_clk, ath79_pll_base); +-} +- + static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, + u32 frac, u32 out_div) + { +@@ -253,6 +250,8 @@ static void __init ar934x_clocks_init(vo + else + ref_rate = 25 * 1000 * 1000; + ++ ref_rate = ath79_setup_ref_clk(ref_rate); ++ + pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG); + if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) { + out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) & +@@ -339,7 +338,6 @@ static void __init ar934x_clocks_init(vo + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_set_clk(ATH79_CLK_REF, ref_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +@@ -363,6 +361,8 @@ static void __init qca953x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + ++ ref_rate = ath79_setup_ref_clk(ref_rate); ++ + pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; +@@ -423,7 +423,6 @@ static void __init qca953x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_set_clk(ATH79_CLK_REF, ref_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +@@ -445,6 +444,8 @@ static void __init qca955x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + ++ ref_rate = ath79_setup_ref_clk(ref_rate); ++ + pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; +@@ -505,7 +506,6 @@ static void __init qca955x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_set_clk(ATH79_CLK_REF, ref_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +@@ -537,6 +537,8 @@ static void __init qca956x_clocks_init(v + else + ref_rate = 25 * 1000 * 1000; + ++ ref_rate = ath79_setup_ref_clk(ref_rate); ++ + pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; +@@ -606,7 +608,6 @@ static void __init qca956x_clocks_init(v + else + ahb_rate = cpu_pll / (postdiv + 1); + +- ath79_set_clk(ATH79_CLK_REF, ref_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); +@@ -682,10 +683,8 @@ static void __init ath79_clocks_init_dt_ + void __iomem *pll_base; + + ref_clk = of_clk_get(np, 0); +- if (IS_ERR(ref_clk)) { +- pr_err("%pOF: of_clk_get failed\n", np); +- goto err; +- } ++ if (!IS_ERR(ref_clk)) ++ clks[ATH79_CLK_REF] = ref_clk; + + pll_base = of_iomap(np, 0); + if (!pll_base) { +@@ -694,9 +693,9 @@ static void __init ath79_clocks_init_dt_ + } + + if (of_device_is_compatible(np, "qca,ar9130-pll")) +- ar724x_clk_init(ref_clk, pll_base); ++ ar724x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,ar9330-pll")) +- ar9330_clk_init(ref_clk, pll_base); ++ ar933x_clocks_init(pll_base); + else { + pr_err("%pOF: could not find any appropriate clk_init()\n", np); + goto err_iounmap; +@@ -714,9 +713,6 @@ err_iounmap: + + err_clk: + clk_put(ref_clk); +- +-err: +- return; + } + CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng); + CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng); diff --git a/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch b/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch new file mode 100644 index 0000000000..13f46a9146 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch @@ -0,0 +1,77 @@ +From 6325626de001df98aebe51f3008b1aca05798d19 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:26:27 +0100 +Subject: [PATCH 25/33] MIPS: ath79: support setting up clock via DT on all SoC + types + +Use the same functions as the legacy code + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 39 ++++++++++++++++++++++----------------- + 1 file changed, 22 insertions(+), 17 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -669,16 +669,6 @@ ath79_get_sys_clk_rate(const char *id) + #ifdef CONFIG_OF + static void __init ath79_clocks_init_dt(struct device_node *np) + { +- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +-} +- +-CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt); +-CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt); +-CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt); +-CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt); +- +-static void __init ath79_clocks_init_dt_ng(struct device_node *np) +-{ + struct clk *ref_clk; + void __iomem *pll_base; + +@@ -692,14 +682,21 @@ static void __init ath79_clocks_init_dt_ + goto err_clk; + } + +- if (of_device_is_compatible(np, "qca,ar9130-pll")) ++ if (of_device_is_compatible(np, "qca,ar7100-pll")) ++ ar71xx_clocks_init(pll_base); ++ else if (of_device_is_compatible(np, "qca,ar7240-pll") || ++ of_device_is_compatible(np, "qca,ar9130-pll")) + ar724x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,ar9330-pll")) + ar933x_clocks_init(pll_base); +- else { +- pr_err("%pOF: could not find any appropriate clk_init()\n", np); +- goto err_iounmap; +- } ++ else if (of_device_is_compatible(np, "qca,ar9340-pll")) ++ ar934x_clocks_init(pll_base); ++ else if (of_device_is_compatible(np, "qca,qca9530-pll")) ++ qca953x_clocks_init(pll_base); ++ else if (of_device_is_compatible(np, "qca,qca9550-pll")) ++ qca955x_clocks_init(pll_base); ++ else if (of_device_is_compatible(np, "qca,qca9560-pll")) ++ qca956x_clocks_init(pll_base); + + if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { + pr_err("%pOF: could not register clk provider\n", np); +@@ -714,6 +711,14 @@ err_iounmap: + err_clk: + clk_put(ref_clk); + } +-CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng); +-CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng); ++ ++CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt); ++CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt); ++ + #endif diff --git a/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch b/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch new file mode 100644 index 0000000000..27adb56f56 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch @@ -0,0 +1,59 @@ +From 78538d673801902108797f2c813e70cfbce280c9 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau <nbd@nbd.name> +Date: Tue, 6 Mar 2018 13:27:28 +0100 +Subject: [PATCH 26/33] MIPS: ath79: export switch MDIO reference clock + +On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz +clock. If that feature is not used, it defaults to the main reference +clock, like on all other SoC. + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 8 ++++++++ + include/dt-bindings/clock/ath79-clk.h | 3 ++- + 2 files changed, 10 insertions(+), 1 deletion(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7 + [ATH79_CLK_DDR] = "ddr", + [ATH79_CLK_AHB] = "ahb", + [ATH79_CLK_REF] = "ref", ++ [ATH79_CLK_MDIO] = "mdio", + }; + + static const char * __init ath79_clk_name(int type) +@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(vo + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + ++ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG); ++ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) ++ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000); ++ + iounmap(dpll_base); + } + +@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt( + else if (of_device_is_compatible(np, "qca,qca9560-pll")) + qca956x_clocks_init(pll_base); + ++ if (!clks[ATH79_CLK_MDIO]) ++ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF]; ++ + if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { + pr_err("%pOF: could not register clk provider\n", np); + goto err_iounmap; +--- a/include/dt-bindings/clock/ath79-clk.h ++++ b/include/dt-bindings/clock/ath79-clk.h +@@ -14,7 +14,8 @@ + #define ATH79_CLK_DDR 1 + #define ATH79_CLK_AHB 2 + #define ATH79_CLK_REF 3 ++#define ATH79_CLK_MDIO 4 + +-#define ATH79_CLK_END 4 ++#define ATH79_CLK_END 5 + + #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch b/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch new file mode 100644 index 0000000000..79f003d2ea --- /dev/null +++ b/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch @@ -0,0 +1,233 @@ +From 3765b1f79593a0a9098ed15e48074c95403a53ee Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:05:08 +0200 +Subject: [PATCH 27/33] MIPS: ath79: drop legacy IRQ code + +With the target now being fully OF based, we can drop the legacy IRQ code. +All IRQs are now handled via the new irqchip drivers. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/Makefile | 2 +- + arch/mips/ath79/irq.c | 169 ------------------------------- + arch/mips/ath79/setup.c | 6 ++ + arch/mips/include/asm/mach-ath79/ath79.h | 4 - + 4 files changed, 7 insertions(+), 174 deletions(-) + delete mode 100644 arch/mips/ath79/irq.c + +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -8,7 +8,7 @@ + # under the terms of the GNU General Public License version 2 as published + # by the Free Software Foundation. + +-obj-y := prom.o setup.o irq.o common.o clock.o ++obj-y := prom.o setup.o common.o clock.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + obj-$(CONFIG_PCI) += pci.o +--- a/arch/mips/ath79/irq.c ++++ /dev/null +@@ -1,169 +0,0 @@ +-/* +- * Atheros AR71xx/AR724x/AR913x specific interrupt handling +- * +- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/kernel.h> +-#include <linux/init.h> +-#include <linux/interrupt.h> +-#include <linux/irqchip.h> +-#include <linux/of_irq.h> +- +-#include <asm/irq_cpu.h> +-#include <asm/mipsregs.h> +- +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "common.h" +-#include "machtypes.h" +- +- +-static void ar934x_ip2_irq_dispatch(struct irq_desc *desc) +-{ +- u32 status; +- +- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); +- +- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { +- ath79_ddr_wb_flush(3); +- generic_handle_irq(ATH79_IP2_IRQ(0)); +- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { +- ath79_ddr_wb_flush(4); +- generic_handle_irq(ATH79_IP2_IRQ(1)); +- } else { +- spurious_interrupt(); +- } +-} +- +-static void ar934x_ip2_irq_init(void) +-{ +- int i; +- +- for (i = ATH79_IP2_IRQ_BASE; +- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); +- +- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); +-} +- +-static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) +-{ +- u32 status; +- +- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); +- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL; +- +- if (status == 0) { +- spurious_interrupt(); +- return; +- } +- +- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { +- /* TODO: flush DDR? */ +- generic_handle_irq(ATH79_IP2_IRQ(0)); +- } +- +- if (status & QCA955X_EXT_INT_WMAC_ALL) { +- /* TODO: flush DDR? */ +- generic_handle_irq(ATH79_IP2_IRQ(1)); +- } +-} +- +-static void qca955x_ip3_irq_dispatch(struct irq_desc *desc) +-{ +- u32 status; +- +- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); +- status &= QCA955X_EXT_INT_PCIE_RC2_ALL | +- QCA955X_EXT_INT_USB1 | +- QCA955X_EXT_INT_USB2; +- +- if (status == 0) { +- spurious_interrupt(); +- return; +- } +- +- if (status & QCA955X_EXT_INT_USB1) { +- /* TODO: flush DDR? */ +- generic_handle_irq(ATH79_IP3_IRQ(0)); +- } +- +- if (status & QCA955X_EXT_INT_USB2) { +- /* TODO: flush DDR? */ +- generic_handle_irq(ATH79_IP3_IRQ(1)); +- } +- +- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { +- /* TODO: flush DDR? */ +- generic_handle_irq(ATH79_IP3_IRQ(2)); +- } +-} +- +-static void qca955x_irq_init(void) +-{ +- int i; +- +- for (i = ATH79_IP2_IRQ_BASE; +- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); +- +- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); +- +- for (i = ATH79_IP3_IRQ_BASE; +- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); +- +- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); +-} +- +-void __init arch_init_irq(void) +-{ +- unsigned irq_wb_chan2 = -1; +- unsigned irq_wb_chan3 = -1; +- bool misc_is_ar71xx; +- +- if (mips_machtype == ATH79_MACH_GENERIC_OF) { +- irqchip_init(); +- return; +- } +- +- if (soc_is_ar71xx() || soc_is_ar724x() || +- soc_is_ar913x() || soc_is_ar933x()) { +- irq_wb_chan2 = 3; +- irq_wb_chan3 = 2; +- } else if (soc_is_ar934x()) { +- irq_wb_chan3 = 2; +- } +- +- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3); +- +- if (soc_is_ar71xx() || soc_is_ar913x()) +- misc_is_ar71xx = true; +- else if (soc_is_ar724x() || +- soc_is_ar933x() || +- soc_is_ar934x() || +- soc_is_qca955x()) +- misc_is_ar71xx = false; +- else +- BUG(); +- ath79_misc_irq_init( +- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS, +- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx); +- +- if (soc_is_ar934x()) +- ar934x_ip2_irq_init(); +- else if (soc_is_qca955x()) +- qca955x_irq_init(); +-} +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -19,6 +19,7 @@ + #include <linux/clk.h> + #include <linux/clk-provider.h> + #include <linux/of_fdt.h> ++#include <linux/irqchip.h> + + #include <asm/bootinfo.h> + #include <asm/idle.h> +@@ -311,6 +312,11 @@ void __init plat_time_init(void) + mips_hpt_frequency = cpu_clk_rate / 2; + } + ++void __init arch_init_irq(void) ++{ ++ irqchip_init(); ++} ++ + static int __init ath79_setup(void) + { + if (mips_machtype == ATH79_MACH_GENERIC_OF) +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigne + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); + +-void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3); +-void ath79_misc_irq_init(void __iomem *regs, int irq, +- int irq_base, bool is_ar71xx); +- + #endif /* __ASM_MACH_ATH79_H */ diff --git a/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch b/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch new file mode 100644 index 0000000000..0515b206b0 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch @@ -0,0 +1,1048 @@ +From badf28957b6dc400dff27bd23ba2ae75d9514be5 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:04:09 +0200 +Subject: [PATCH 28/33] MIPS: ath79: drop machfiles + +With the target now being fully OF based, we can drop the legacy mach +files. Boards can now boot fully of devicetree files. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/Kconfig | 1 - + arch/mips/ath79/Kconfig | 73 ------------------- + arch/mips/ath79/Makefile | 10 --- + arch/mips/ath79/clock.c | 1 - + arch/mips/ath79/mach-ap121.c | 92 ------------------------ + arch/mips/ath79/mach-ap136.c | 156 ----------------------------------------- + arch/mips/ath79/mach-ap81.c | 100 -------------------------- + arch/mips/ath79/mach-db120.c | 136 ----------------------------------- + arch/mips/ath79/mach-pb44.c | 128 --------------------------------- + arch/mips/ath79/mach-ubnt-xm.c | 126 --------------------------------- + arch/mips/ath79/machtypes.h | 28 -------- + arch/mips/ath79/setup.c | 77 +++----------------- + 12 files changed, 9 insertions(+), 919 deletions(-) + delete mode 100644 arch/mips/ath79/mach-ap121.c + delete mode 100644 arch/mips/ath79/mach-ap136.c + delete mode 100644 arch/mips/ath79/mach-ap81.c + delete mode 100644 arch/mips/ath79/mach-db120.c + delete mode 100644 arch/mips/ath79/mach-pb44.c + delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c + delete mode 100644 arch/mips/ath79/machtypes.h + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -202,7 +202,6 @@ config ATH79 + select COMMON_CLK + select CLKDEV_LOOKUP + select IRQ_MIPS_CPU +- select MIPS_MACHINE + select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1,79 +1,6 @@ + # SPDX-License-Identifier: GPL-2.0 + if ATH79 + +-menu "Atheros AR71XX/AR724X/AR913X machine selection" +- +-config ATH79_MACH_AP121 +- bool "Atheros AP121 reference board" +- select SOC_AR933X +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- select ATH79_DEV_USB +- select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP121 reference board. +- +-config ATH79_MACH_AP136 +- bool "Atheros AP136 reference board" +- select SOC_QCA955X +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- select ATH79_DEV_USB +- select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP136 reference board. +- +-config ATH79_MACH_AP81 +- bool "Atheros AP81 reference board" +- select SOC_AR913X +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- select ATH79_DEV_USB +- select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP81 reference board. +- +-config ATH79_MACH_DB120 +- bool "Atheros DB120 reference board" +- select SOC_AR934X +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- select ATH79_DEV_USB +- select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros DB120 reference board. +- +-config ATH79_MACH_PB44 +- bool "Atheros PB44 reference board" +- select SOC_AR71XX +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- select ATH79_DEV_USB +- help +- Say 'Y' here if you want your kernel to support the +- Atheros PB44 reference board. +- +-config ATH79_MACH_UBNT_XM +- bool "Ubiquiti Networks XM (rev 1.0) board" +- select SOC_AR724X +- select ATH79_DEV_GPIO_BUTTONS +- select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI +- help +- Say 'Y' here if you want your kernel to support the +- Ubiquiti Networks XM (rev 1.0) board. +- +-endmenu +- + config SOC_AR71XX + select HW_HAS_PCI + def_bool n +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o + obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o + obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o +- +-# +-# Machines +-# +-obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o +-obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o +-obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o +-obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +-obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o +-obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -26,7 +26,6 @@ + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> + #include "common.h" +-#include "machtypes.h" + + #define AR71XX_BASE_FREQ 40000000 + #define AR724X_BASE_FREQ 40000000 +--- a/arch/mips/ath79/mach-ap121.c ++++ /dev/null +@@ -1,92 +0,0 @@ +-/* +- * Atheros AP121 board support +- * +- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include "machtypes.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "dev-usb.h" +-#include "dev-wmac.h" +- +-#define AP121_GPIO_LED_WLAN 0 +-#define AP121_GPIO_LED_USB 1 +- +-#define AP121_GPIO_BTN_JUMPSTART 11 +-#define AP121_GPIO_BTN_RESET 12 +- +-#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ +-#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) +- +-#define AP121_CAL_DATA_ADDR 0x1fff1000 +- +-static struct gpio_led ap121_leds_gpio[] __initdata = { +- { +- .name = "ap121:green:usb", +- .gpio = AP121_GPIO_LED_USB, +- .active_low = 0, +- }, +- { +- .name = "ap121:green:wlan", +- .gpio = AP121_GPIO_LED_WLAN, +- .active_low = 0, +- }, +-}; +- +-static struct gpio_keys_button ap121_gpio_keys[] __initdata = { +- { +- .desc = "jumpstart button", +- .type = EV_KEY, +- .code = KEY_WPS_BUTTON, +- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP121_GPIO_BTN_JUMPSTART, +- .active_low = 1, +- }, +- { +- .desc = "reset button", +- .type = EV_KEY, +- .code = KEY_RESTART, +- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP121_GPIO_BTN_RESET, +- .active_low = 1, +- } +-}; +- +-static struct spi_board_info ap121_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l1606e", +- } +-}; +- +-static struct ath79_spi_platform_data ap121_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-static void __init ap121_setup(void) +-{ +- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); +- +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), +- ap121_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap121_gpio_keys), +- ap121_gpio_keys); +- +- ath79_register_spi(&ap121_spi_data, ap121_spi_info, +- ARRAY_SIZE(ap121_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(cal_data); +-} +- +-MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", +- ap121_setup); +--- a/arch/mips/ath79/mach-ap136.c ++++ /dev/null +@@ -1,156 +0,0 @@ +-/* +- * Qualcomm Atheros AP136 reference board support +- * +- * Copyright (c) 2012 Qualcomm Atheros +- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> +- * +- * Permission to use, copy, modify, and/or distribute this software for any +- * purpose with or without fee is hereby granted, provided that the above +- * copyright notice and this permission notice appear in all copies. +- * +- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +- * +- */ +- +-#include <linux/pci.h> +-#include <linux/ath9k_platform.h> +- +-#include "machtypes.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "dev-usb.h" +-#include "dev-wmac.h" +-#include "pci.h" +- +-#define AP136_GPIO_LED_STATUS_RED 14 +-#define AP136_GPIO_LED_STATUS_GREEN 19 +-#define AP136_GPIO_LED_USB 4 +-#define AP136_GPIO_LED_WLAN_2G 13 +-#define AP136_GPIO_LED_WLAN_5G 12 +-#define AP136_GPIO_LED_WPS_RED 15 +-#define AP136_GPIO_LED_WPS_GREEN 20 +- +-#define AP136_GPIO_BTN_WPS 16 +-#define AP136_GPIO_BTN_RFKILL 21 +- +-#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ +-#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) +- +-#define AP136_WMAC_CALDATA_OFFSET 0x1000 +-#define AP136_PCIE_CALDATA_OFFSET 0x5000 +- +-static struct gpio_led ap136_leds_gpio[] __initdata = { +- { +- .name = "qca:green:status", +- .gpio = AP136_GPIO_LED_STATUS_GREEN, +- .active_low = 1, +- }, +- { +- .name = "qca:red:status", +- .gpio = AP136_GPIO_LED_STATUS_RED, +- .active_low = 1, +- }, +- { +- .name = "qca:green:wps", +- .gpio = AP136_GPIO_LED_WPS_GREEN, +- .active_low = 1, +- }, +- { +- .name = "qca:red:wps", +- .gpio = AP136_GPIO_LED_WPS_RED, +- .active_low = 1, +- }, +- { +- .name = "qca:red:wlan-2g", +- .gpio = AP136_GPIO_LED_WLAN_2G, +- .active_low = 1, +- }, +- { +- .name = "qca:red:usb", +- .gpio = AP136_GPIO_LED_USB, +- .active_low = 1, +- } +-}; +- +-static struct gpio_keys_button ap136_gpio_keys[] __initdata = { +- { +- .desc = "WPS button", +- .type = EV_KEY, +- .code = KEY_WPS_BUTTON, +- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP136_GPIO_BTN_WPS, +- .active_low = 1, +- }, +- { +- .desc = "RFKILL button", +- .type = EV_KEY, +- .code = KEY_RFKILL, +- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP136_GPIO_BTN_RFKILL, +- .active_low = 1, +- }, +-}; +- +-static struct spi_board_info ap136_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- } +-}; +- +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; +- +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) +-{ +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; +- +- return 0; +-} +- +-static void __init ap136_pci_init(u8 *eeprom) +-{ +- memcpy(ap136_ath9k_data.eeprom_data, eeprom, +- sizeof(ap136_ath9k_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void ap136_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ +- +-static void __init ap136_setup(void) +-{ +- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); +- +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), +- ap136_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap136_gpio_keys), +- ap136_gpio_keys); +- ath79_register_spi(&ap136_spi_data, ap136_spi_info, +- ARRAY_SIZE(ap136_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); +- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); +-} +- +-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", +- "Atheros AP136-010 reference board", +- ap136_setup); +--- a/arch/mips/ath79/mach-ap81.c ++++ /dev/null +@@ -1,100 +0,0 @@ +-/* +- * Atheros AP81 board support +- * +- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include "machtypes.h" +-#include "dev-wmac.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "dev-usb.h" +- +-#define AP81_GPIO_LED_STATUS 1 +-#define AP81_GPIO_LED_AOSS 3 +-#define AP81_GPIO_LED_WLAN 6 +-#define AP81_GPIO_LED_POWER 14 +- +-#define AP81_GPIO_BTN_SW4 12 +-#define AP81_GPIO_BTN_SW1 21 +- +-#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ +-#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) +- +-#define AP81_CAL_DATA_ADDR 0x1fff1000 +- +-static struct gpio_led ap81_leds_gpio[] __initdata = { +- { +- .name = "ap81:green:status", +- .gpio = AP81_GPIO_LED_STATUS, +- .active_low = 1, +- }, { +- .name = "ap81:amber:aoss", +- .gpio = AP81_GPIO_LED_AOSS, +- .active_low = 1, +- }, { +- .name = "ap81:green:wlan", +- .gpio = AP81_GPIO_LED_WLAN, +- .active_low = 1, +- }, { +- .name = "ap81:green:power", +- .gpio = AP81_GPIO_LED_POWER, +- .active_low = 1, +- } +-}; +- +-static struct gpio_keys_button ap81_gpio_keys[] __initdata = { +- { +- .desc = "sw1", +- .type = EV_KEY, +- .code = BTN_0, +- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP81_GPIO_BTN_SW1, +- .active_low = 1, +- } , { +- .desc = "sw4", +- .type = EV_KEY, +- .code = BTN_1, +- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, +- .gpio = AP81_GPIO_BTN_SW4, +- .active_low = 1, +- } +-}; +- +-static struct spi_board_info ap81_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "m25p64", +- } +-}; +- +-static struct ath79_spi_platform_data ap81_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-static void __init ap81_setup(void) +-{ +- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); +- +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), +- ap81_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap81_gpio_keys), +- ap81_gpio_keys); +- ath79_register_spi(&ap81_spi_data, ap81_spi_info, +- ARRAY_SIZE(ap81_spi_info)); +- ath79_register_wmac(cal_data); +- ath79_register_usb(); +-} +- +-MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", +- ap81_setup); +--- a/arch/mips/ath79/mach-db120.c ++++ /dev/null +@@ -1,136 +0,0 @@ +-/* +- * Atheros DB120 reference board support +- * +- * Copyright (c) 2011 Qualcomm Atheros +- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> +- * +- * Permission to use, copy, modify, and/or distribute this software for any +- * purpose with or without fee is hereby granted, provided that the above +- * copyright notice and this permission notice appear in all copies. +- * +- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +- * +- */ +- +-#include <linux/pci.h> +-#include <linux/ath9k_platform.h> +- +-#include "machtypes.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "dev-usb.h" +-#include "dev-wmac.h" +-#include "pci.h" +- +-#define DB120_GPIO_LED_WLAN_5G 12 +-#define DB120_GPIO_LED_WLAN_2G 13 +-#define DB120_GPIO_LED_STATUS 14 +-#define DB120_GPIO_LED_WPS 15 +- +-#define DB120_GPIO_BTN_WPS 16 +- +-#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ +-#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) +- +-#define DB120_WMAC_CALDATA_OFFSET 0x1000 +-#define DB120_PCIE_CALDATA_OFFSET 0x5000 +- +-static struct gpio_led db120_leds_gpio[] __initdata = { +- { +- .name = "db120:green:status", +- .gpio = DB120_GPIO_LED_STATUS, +- .active_low = 1, +- }, +- { +- .name = "db120:green:wps", +- .gpio = DB120_GPIO_LED_WPS, +- .active_low = 1, +- }, +- { +- .name = "db120:green:wlan-5g", +- .gpio = DB120_GPIO_LED_WLAN_5G, +- .active_low = 1, +- }, +- { +- .name = "db120:green:wlan-2g", +- .gpio = DB120_GPIO_LED_WLAN_2G, +- .active_low = 1, +- }, +-}; +- +-static struct gpio_keys_button db120_gpio_keys[] __initdata = { +- { +- .desc = "WPS button", +- .type = EV_KEY, +- .code = KEY_WPS_BUTTON, +- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, +- .gpio = DB120_GPIO_BTN_WPS, +- .active_low = 1, +- }, +-}; +- +-static struct spi_board_info db120_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "s25sl064a", +- } +-}; +- +-static struct ath79_spi_platform_data db120_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data db120_ath9k_data; +- +-static int db120_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &db120_ath9k_data; +- break; +- } +- +- return 0; +-} +- +-static void __init db120_pci_init(u8 *eeprom) +-{ +- memcpy(db120_ath9k_data.eeprom_data, eeprom, +- sizeof(db120_ath9k_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void db120_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ +- +-static void __init db120_setup(void) +-{ +- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); +- +- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), +- db120_leds_gpio); +- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(db120_gpio_keys), +- db120_gpio_keys); +- ath79_register_spi(&db120_spi_data, db120_spi_info, +- ARRAY_SIZE(db120_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); +- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); +-} +- +-MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", +- db120_setup); +--- a/arch/mips/ath79/mach-pb44.c ++++ /dev/null +@@ -1,128 +0,0 @@ +-/* +- * Atheros PB44 reference board support +- * +- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/platform_device.h> +-#include <linux/i2c.h> +-#include <linux/gpio/machine.h> +-#include <linux/platform_data/pcf857x.h> +- +-#include "machtypes.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "dev-usb.h" +-#include "pci.h" +- +-#define PB44_GPIO_I2C_SCL 0 +-#define PB44_GPIO_I2C_SDA 1 +- +-#define PB44_GPIO_EXP_BASE 16 +-#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) +-#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) +-#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) +-#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10) +- +-#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ +-#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) +- +-static struct gpiod_lookup_table pb44_i2c_gpiod_table = { +- .dev_id = "i2c-gpio.0", +- .table = { +- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, +- NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), +- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL, +- NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), +- }, +-}; +- +-static struct platform_device pb44_i2c_gpio_device = { +- .name = "i2c-gpio", +- .id = 0, +- .dev = { +- .platform_data = NULL, +- } +-}; +- +-static struct pcf857x_platform_data pb44_pcf857x_data = { +- .gpio_base = PB44_GPIO_EXP_BASE, +-}; +- +-static struct i2c_board_info pb44_i2c_board_info[] __initdata = { +- { +- I2C_BOARD_INFO("pcf8575", 0x20), +- .platform_data = &pb44_pcf857x_data, +- }, +-}; +- +-static struct gpio_led pb44_leds_gpio[] __initdata = { +- { +- .name = "pb44:amber:jump1", +- .gpio = PB44_GPIO_LED_JUMP1, +- .active_low = 1, +- }, { +- .name = "pb44:green:jump2", +- .gpio = PB44_GPIO_LED_JUMP2, +- .active_low = 1, +- }, +-}; +- +-static struct gpio_keys_button pb44_gpio_keys[] __initdata = { +- { +- .desc = "soft_reset", +- .type = EV_KEY, +- .code = KEY_RESTART, +- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, +- .gpio = PB44_GPIO_SW_RESET, +- .active_low = 1, +- } , { +- .desc = "jumpstart", +- .type = EV_KEY, +- .code = KEY_WPS_BUTTON, +- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, +- .gpio = PB44_GPIO_SW_JUMP, +- .active_low = 1, +- } +-}; +- +-static struct spi_board_info pb44_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "m25p64", +- }, +-}; +- +-static struct ath79_spi_platform_data pb44_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-static void __init pb44_init(void) +-{ +- gpiod_add_lookup_table(&pb44_i2c_gpiod_table); +- i2c_register_board_info(0, pb44_i2c_board_info, +- ARRAY_SIZE(pb44_i2c_board_info)); +- platform_device_register(&pb44_i2c_gpio_device); +- +- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), +- pb44_leds_gpio); +- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(pb44_gpio_keys), +- pb44_gpio_keys); +- ath79_register_spi(&pb44_spi_data, pb44_spi_info, +- ARRAY_SIZE(pb44_spi_info)); +- ath79_register_usb(); +- ath79_register_pci(); +-} +- +-MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", +- pb44_init); +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ /dev/null +@@ -1,126 +0,0 @@ +-/* +- * Ubiquiti Networks XM (rev 1.0) board support +- * +- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> +- * +- * Derived from: mach-pb44.c +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/pci.h> +-#include <linux/ath9k_platform.h> +- +-#include <asm/mach-ath79/irq.h> +- +-#include "machtypes.h" +-#include "dev-gpio-buttons.h" +-#include "dev-leds-gpio.h" +-#include "dev-spi.h" +-#include "pci.h" +- +-#define UBNT_XM_GPIO_LED_L1 0 +-#define UBNT_XM_GPIO_LED_L2 1 +-#define UBNT_XM_GPIO_LED_L3 11 +-#define UBNT_XM_GPIO_LED_L4 7 +- +-#define UBNT_XM_GPIO_BTN_RESET 12 +- +-#define UBNT_XM_KEYS_POLL_INTERVAL 20 +-#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) +- +-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) +- +-static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { +- { +- .name = "ubnt-xm:red:link1", +- .gpio = UBNT_XM_GPIO_LED_L1, +- .active_low = 0, +- }, { +- .name = "ubnt-xm:orange:link2", +- .gpio = UBNT_XM_GPIO_LED_L2, +- .active_low = 0, +- }, { +- .name = "ubnt-xm:green:link3", +- .gpio = UBNT_XM_GPIO_LED_L3, +- .active_low = 0, +- }, { +- .name = "ubnt-xm:green:link4", +- .gpio = UBNT_XM_GPIO_LED_L4, +- .active_low = 0, +- }, +-}; +- +-static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { +- { +- .desc = "reset", +- .type = EV_KEY, +- .code = KEY_RESTART, +- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, +- .gpio = UBNT_XM_GPIO_BTN_RESET, +- .active_low = 1, +- } +-}; +- +-static struct spi_board_info ubnt_xm_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- } +-}; +- +-static struct ath79_spi_platform_data ubnt_xm_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ubnt_xm_eeprom_data; +- +-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &ubnt_xm_eeprom_data; +- break; +- } +- +- return 0; +-} +- +-static void __init ubnt_xm_pci_init(void) +-{ +- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, +- sizeof(ubnt_xm_eeprom_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void ubnt_xm_pci_init(void) {} +-#endif /* CONFIG_PCI */ +- +-static void __init ubnt_xm_init(void) +-{ +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), +- ubnt_xm_leds_gpio); +- +- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ubnt_xm_gpio_keys), +- ubnt_xm_gpio_keys); +- +- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, +- ARRAY_SIZE(ubnt_xm_spi_info)); +- +- ubnt_xm_pci_init(); +-} +- +-MIPS_MACHINE(ATH79_MACH_UBNT_XM, +- "UBNT-XM", +- "Ubiquiti Networks XM (rev 1.0) board", +- ubnt_xm_init); +--- a/arch/mips/ath79/machtypes.h ++++ /dev/null +@@ -1,28 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X machine type definitions +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_MACHTYPE_H +-#define _ATH79_MACHTYPE_H +- +-#include <asm/mips_machine.h> +- +-enum ath79_mach_type { +- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */ +- ATH79_MACH_GENERIC = 0, +- ATH79_MACH_AP121, /* Atheros AP121 reference board */ +- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ +- ATH79_MACH_AP81, /* Atheros AP81 reference board */ +- ATH79_MACH_DB120, /* Atheros DB120 reference board */ +- ATH79_MACH_PB44, /* Atheros PB44 reference board */ +- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ +-}; +- +-#endif /* _ATH79_MACHTYPE_H */ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -33,7 +33,6 @@ + #include <asm/mach-ath79/ar71xx_regs.h> + #include "common.h" + #include "dev-common.h" +-#include "machtypes.h" + + #define ATH79_SYS_TYPE_LEN 64 + +@@ -236,25 +235,21 @@ void __init plat_mem_setup(void) + else if (fw_passed_dtb) + __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); + +- if (mips_machtype != ATH79_MACH_GENERIC_OF) { +- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, +- AR71XX_RESET_SIZE); +- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, +- AR71XX_PLL_SIZE); +- ath79_detect_sys_type(); +- ath79_ddr_ctrl_init(); ++ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, ++ AR71XX_RESET_SIZE); ++ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, ++ AR71XX_PLL_SIZE); ++ ath79_detect_sys_type(); ++ ath79_ddr_ctrl_init(); + +- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); +- +- /* OF machines should use the reset driver */ +- _machine_restart = ath79_restart; +- } ++ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); + ++ _machine_restart = ath79_restart; + _machine_halt = ath79_halt; + pm_power_off = ath79_halt; + } + +-static void __init ath79_of_plat_time_init(void) ++void __init plat_time_init(void) + { + struct device_node *np; + struct clk *clk; +@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_in + clk_put(clk); + } + +-void __init plat_time_init(void) +-{ +- unsigned long cpu_clk_rate; +- unsigned long ahb_clk_rate; +- unsigned long ddr_clk_rate; +- unsigned long ref_clk_rate; +- +- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) { +- ath79_of_plat_time_init(); +- return; +- } +- +- ath79_clocks_init(); +- +- cpu_clk_rate = ath79_get_sys_clk_rate("cpu"); +- ahb_clk_rate = ath79_get_sys_clk_rate("ahb"); +- ddr_clk_rate = ath79_get_sys_clk_rate("ddr"); +- ref_clk_rate = ath79_get_sys_clk_rate("ref"); +- +- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n", +- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000, +- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000, +- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000, +- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000); +- +- mips_hpt_frequency = cpu_clk_rate / 2; +-} +- + void __init arch_init_irq(void) + { + irqchip_init(); + } + +-static int __init ath79_setup(void) +-{ +- if (mips_machtype == ATH79_MACH_GENERIC_OF) +- return 0; +- +- ath79_gpio_init(); +- ath79_register_uart(); +- ath79_register_wdt(); +- +- mips_machine_setup(); +- +- return 0; +-} +- +-arch_initcall(ath79_setup); +- + void __init device_tree_init(void) + { + unflatten_and_copy_device_tree(); + } +- +-MIPS_MACHINE(ATH79_MACH_GENERIC, +- "Generic", +- "Generic AR71XX/AR724X/AR913X based board", +- NULL); +- +-MIPS_MACHINE(ATH79_MACH_GENERIC_OF, +- "DTB", +- "Generic AR71XX/AR724X/AR913X based board (DT)", +- NULL); diff --git a/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch b/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch new file mode 100644 index 0000000000..254f2f9253 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch @@ -0,0 +1,379 @@ +From d0f1420702ed47a82572aaf39e7407055518d14e Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:05:19 +0200 +Subject: [PATCH 29/33] MIPS: ath79: drop legacy pci code + +With the target now being fully OF based, we can drop the legacy pci +platform code. The only bits that we need to keep is the fixup code +which we move to its own code file. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/Makefile | 1 - + arch/mips/ath79/pci.c | 273 -------------------------------------------- + arch/mips/ath79/pci.h | 35 ------ + arch/mips/pci/Makefile | 1 + + arch/mips/pci/fixup-ath79.c | 21 ++++ + 5 files changed, 22 insertions(+), 309 deletions(-) + delete mode 100644 arch/mips/ath79/pci.c + delete mode 100644 arch/mips/ath79/pci.h + create mode 100644 arch/mips/pci/fixup-ath79.c + +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -11,7 +11,6 @@ + obj-y := prom.o setup.o common.o clock.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +-obj-$(CONFIG_PCI) += pci.o + + # + # Devices +--- a/arch/mips/ath79/pci.c ++++ /dev/null +@@ -1,273 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X specific PCI setup code +- * +- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15 BSP +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/pci.h> +-#include <linux/resource.h> +-#include <linux/platform_device.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/irq.h> +-#include "pci.h" +- +-static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); +-static const struct ath79_pci_irq *ath79_pci_irq_map; +-static unsigned ath79_pci_nr_irqs; +- +-static const struct ath79_pci_irq ar71xx_pci_irq_map[] = { +- { +- .slot = 17, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(0), +- }, { +- .slot = 18, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(1), +- }, { +- .slot = 19, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(2), +- } +-}; +- +-static const struct ath79_pci_irq ar724x_pci_irq_map[] = { +- { +- .slot = 0, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(0), +- } +-}; +- +-static const struct ath79_pci_irq qca955x_pci_irq_map[] = { +- { +- .bus = 0, +- .slot = 0, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(0), +- }, +- { +- .bus = 1, +- .slot = 0, +- .pin = 1, +- .irq = ATH79_PCI_IRQ(1), +- }, +-}; +- +-int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) +-{ +- int irq = -1; +- int i; +- +- if (ath79_pci_nr_irqs == 0 || +- ath79_pci_irq_map == NULL) { +- if (soc_is_ar71xx()) { +- ath79_pci_irq_map = ar71xx_pci_irq_map; +- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map); +- } else if (soc_is_ar724x() || +- soc_is_ar9342() || +- soc_is_ar9344()) { +- ath79_pci_irq_map = ar724x_pci_irq_map; +- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); +- } else if (soc_is_qca955x()) { +- ath79_pci_irq_map = qca955x_pci_irq_map; +- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); +- } else { +- pr_crit("pci %s: invalid irq map\n", +- pci_name((struct pci_dev *) dev)); +- return irq; +- } +- } +- +- for (i = 0; i < ath79_pci_nr_irqs; i++) { +- const struct ath79_pci_irq *entry; +- +- entry = &ath79_pci_irq_map[i]; +- if (entry->bus == dev->bus->number && +- entry->slot == slot && +- entry->pin == pin) { +- irq = entry->irq; +- break; +- } +- } +- +- if (irq < 0) +- pr_crit("pci %s: no irq found for pin %u\n", +- pci_name((struct pci_dev *) dev), pin); +- else +- pr_info("pci %s: using irq %d for pin %u\n", +- pci_name((struct pci_dev *) dev), irq, pin); +- +- return irq; +-} +- +-int pcibios_plat_dev_init(struct pci_dev *dev) +-{ +- if (ath79_pci_plat_dev_init) +- return ath79_pci_plat_dev_init(dev); +- +- return 0; +-} +- +-void __init ath79_pci_set_irq_map(unsigned nr_irqs, +- const struct ath79_pci_irq *map) +-{ +- ath79_pci_nr_irqs = nr_irqs; +- ath79_pci_irq_map = map; +-} +- +-void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) +-{ +- ath79_pci_plat_dev_init = func; +-} +- +-static struct platform_device * +-ath79_register_pci_ar71xx(void) +-{ +- struct platform_device *pdev; +- struct resource res[4]; +- +- memset(res, 0, sizeof(res)); +- +- res[0].name = "cfg_base"; +- res[0].flags = IORESOURCE_MEM; +- res[0].start = AR71XX_PCI_CFG_BASE; +- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; +- +- res[1].flags = IORESOURCE_IRQ; +- res[1].start = ATH79_CPU_IRQ(2); +- res[1].end = ATH79_CPU_IRQ(2); +- +- res[2].name = "io_base"; +- res[2].flags = IORESOURCE_IO; +- res[2].start = 0; +- res[2].end = 0; +- +- res[3].name = "mem_base"; +- res[3].flags = IORESOURCE_MEM; +- res[3].start = AR71XX_PCI_MEM_BASE; +- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1; +- +- pdev = platform_device_register_simple("ar71xx-pci", -1, +- res, ARRAY_SIZE(res)); +- return pdev; +-} +- +-static struct platform_device * +-ath79_register_pci_ar724x(int id, +- unsigned long cfg_base, +- unsigned long ctrl_base, +- unsigned long crp_base, +- unsigned long mem_base, +- unsigned long mem_size, +- unsigned long io_base, +- int irq) +-{ +- struct platform_device *pdev; +- struct resource res[6]; +- +- memset(res, 0, sizeof(res)); +- +- res[0].name = "cfg_base"; +- res[0].flags = IORESOURCE_MEM; +- res[0].start = cfg_base; +- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1; +- +- res[1].name = "ctrl_base"; +- res[1].flags = IORESOURCE_MEM; +- res[1].start = ctrl_base; +- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1; +- +- res[2].flags = IORESOURCE_IRQ; +- res[2].start = irq; +- res[2].end = irq; +- +- res[3].name = "mem_base"; +- res[3].flags = IORESOURCE_MEM; +- res[3].start = mem_base; +- res[3].end = mem_base + mem_size - 1; +- +- res[4].name = "io_base"; +- res[4].flags = IORESOURCE_IO; +- res[4].start = io_base; +- res[4].end = io_base; +- +- res[5].name = "crp_base"; +- res[5].flags = IORESOURCE_MEM; +- res[5].start = crp_base; +- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1; +- +- pdev = platform_device_register_simple("ar724x-pci", id, +- res, ARRAY_SIZE(res)); +- return pdev; +-} +- +-int __init ath79_register_pci(void) +-{ +- struct platform_device *pdev = NULL; +- +- if (soc_is_ar71xx()) { +- pdev = ath79_register_pci_ar71xx(); +- } else if (soc_is_ar724x()) { +- pdev = ath79_register_pci_ar724x(-1, +- AR724X_PCI_CFG_BASE, +- AR724X_PCI_CTRL_BASE, +- AR724X_PCI_CRP_BASE, +- AR724X_PCI_MEM_BASE, +- AR724X_PCI_MEM_SIZE, +- 0, +- ATH79_CPU_IRQ(2)); +- } else if (soc_is_ar9342() || +- soc_is_ar9344()) { +- u32 bootstrap; +- +- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0) +- return -ENODEV; +- +- pdev = ath79_register_pci_ar724x(-1, +- AR724X_PCI_CFG_BASE, +- AR724X_PCI_CTRL_BASE, +- AR724X_PCI_CRP_BASE, +- AR724X_PCI_MEM_BASE, +- AR724X_PCI_MEM_SIZE, +- 0, +- ATH79_IP2_IRQ(0)); +- } else if (soc_is_qca9558()) { +- pdev = ath79_register_pci_ar724x(0, +- QCA955X_PCI_CFG_BASE0, +- QCA955X_PCI_CTRL_BASE0, +- QCA955X_PCI_CRP_BASE0, +- QCA955X_PCI_MEM_BASE0, +- QCA955X_PCI_MEM_SIZE, +- 0, +- ATH79_IP2_IRQ(0)); +- +- pdev = ath79_register_pci_ar724x(1, +- QCA955X_PCI_CFG_BASE1, +- QCA955X_PCI_CTRL_BASE1, +- QCA955X_PCI_CRP_BASE1, +- QCA955X_PCI_MEM_BASE1, +- QCA955X_PCI_MEM_SIZE, +- 1, +- ATH79_IP3_IRQ(2)); +- } else { +- /* No PCI support */ +- return -ENODEV; +- } +- +- if (!pdev) +- pr_err("unable to register PCI controller device\n"); +- +- return pdev ? 0 : -ENODEV; +-} +--- a/arch/mips/ath79/pci.h ++++ /dev/null +@@ -1,35 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X PCI support +- * +- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_PCI_H +-#define _ATH79_PCI_H +- +-struct ath79_pci_irq { +- int bus; +- u8 slot; +- u8 pin; +- int irq; +-}; +- +-#ifdef CONFIG_PCI +-void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map); +-void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)); +-int ath79_register_pci(void); +-#else +-static inline void +-ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {} +-static inline void +-ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {} +-static inline int ath79_register_pci(void) { return 0; } +-#endif +- +-#endif /* _ATH79_PCI_H */ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-vir + # + # These are still pretty much in the old state, watch, go blind. + # ++obj-$(CONFIG_ATH79) += fixup-ath79.o + obj-$(CONFIG_LASAT) += pci-lasat.o + obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o + obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o +--- /dev/null ++++ b/arch/mips/pci/fixup-ath79.c +@@ -0,0 +1,21 @@ ++/* ++ * Copyright (C) 2018 John Crispin <john@phrozen.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++//#include <linux/of_irq.h> ++#include <linux/of_pci.h> ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return of_irq_parse_and_map_pci(dev, slot, pin); ++} diff --git a/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch b/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch new file mode 100644 index 0000000000..93a133c1df --- /dev/null +++ b/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch @@ -0,0 +1,933 @@ +From dce930fba8ad3a90ccd164f199e57c2d61937ccd Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:12:38 +0200 +Subject: [PATCH 30/33] MIPS: ath79: drop platform device registration code + +With the target now being fully OF based, we can drop the legacy platform +device registration code. All devices and their drivers are now probed +via OF. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/Makefile | 10 -- + arch/mips/ath79/common.h | 2 - + arch/mips/ath79/dev-common.c | 159 ------------------------ + arch/mips/ath79/dev-common.h | 18 --- + arch/mips/ath79/dev-gpio-buttons.c | 56 --------- + arch/mips/ath79/dev-gpio-buttons.h | 23 ---- + arch/mips/ath79/dev-leds-gpio.c | 54 --------- + arch/mips/ath79/dev-leds-gpio.h | 21 ---- + arch/mips/ath79/dev-spi.c | 38 ------ + arch/mips/ath79/dev-spi.h | 22 ---- + arch/mips/ath79/dev-usb.c | 242 ------------------------------------- + arch/mips/ath79/dev-usb.h | 17 --- + arch/mips/ath79/dev-wmac.c | 155 ------------------------ + arch/mips/ath79/dev-wmac.h | 17 --- + arch/mips/ath79/setup.c | 1 - + 15 files changed, 835 deletions(-) + delete mode 100644 arch/mips/ath79/dev-common.c + delete mode 100644 arch/mips/ath79/dev-common.h + delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c + delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h + delete mode 100644 arch/mips/ath79/dev-leds-gpio.c + delete mode 100644 arch/mips/ath79/dev-leds-gpio.h + delete mode 100644 arch/mips/ath79/dev-spi.c + delete mode 100644 arch/mips/ath79/dev-spi.h + delete mode 100644 arch/mips/ath79/dev-usb.c + delete mode 100644 arch/mips/ath79/dev-usb.h + delete mode 100644 arch/mips/ath79/dev-wmac.c + delete mode 100644 arch/mips/ath79/dev-wmac.h + +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -11,13 +11,3 @@ + obj-y := prom.o setup.o common.o clock.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +- +-# +-# Devices +-# +-obj-y += dev-common.o +-obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o +-obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o +-obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o +-obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o +-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -24,6 +24,4 @@ unsigned long ath79_get_sys_clk_rate(con + + void ath79_ddr_ctrl_init(void); + +-void ath79_gpio_init(void); +- + #endif /* __ATH79_COMMON_H */ +--- a/arch/mips/ath79/dev-common.c ++++ /dev/null +@@ -1,159 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X common devices +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15 BSP +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/kernel.h> +-#include <linux/init.h> +-#include <linux/platform_device.h> +-#include <linux/platform_data/gpio-ath79.h> +-#include <linux/serial_8250.h> +-#include <linux/clk.h> +-#include <linux/err.h> +- +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "common.h" +-#include "dev-common.h" +- +-static struct resource ath79_uart_resources[] = { +- { +- .start = AR71XX_UART_BASE, +- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, +- .flags = IORESOURCE_MEM, +- }, +-}; +- +-#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) +-static struct plat_serial8250_port ath79_uart_data[] = { +- { +- .mapbase = AR71XX_UART_BASE, +- .irq = ATH79_MISC_IRQ(3), +- .flags = AR71XX_UART_FLAGS, +- .iotype = UPIO_MEM32, +- .regshift = 2, +- }, { +- /* terminating entry */ +- } +-}; +- +-static struct platform_device ath79_uart_device = { +- .name = "serial8250", +- .id = PLAT8250_DEV_PLATFORM, +- .resource = ath79_uart_resources, +- .num_resources = ARRAY_SIZE(ath79_uart_resources), +- .dev = { +- .platform_data = ath79_uart_data +- }, +-}; +- +-static struct resource ar933x_uart_resources[] = { +- { +- .start = AR933X_UART_BASE, +- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, +- .flags = IORESOURCE_MEM, +- }, +- { +- .start = ATH79_MISC_IRQ(3), +- .end = ATH79_MISC_IRQ(3), +- .flags = IORESOURCE_IRQ, +- }, +-}; +- +-static struct platform_device ar933x_uart_device = { +- .name = "ar933x-uart", +- .id = -1, +- .resource = ar933x_uart_resources, +- .num_resources = ARRAY_SIZE(ar933x_uart_resources), +-}; +- +-void __init ath79_register_uart(void) +-{ +- unsigned long uart_clk_rate; +- +- uart_clk_rate = ath79_get_sys_clk_rate("uart"); +- +- if (soc_is_ar71xx() || +- soc_is_ar724x() || +- soc_is_ar913x() || +- soc_is_ar934x() || +- soc_is_qca955x()) { +- ath79_uart_data[0].uartclk = uart_clk_rate; +- platform_device_register(&ath79_uart_device); +- } else if (soc_is_ar933x()) { +- platform_device_register(&ar933x_uart_device); +- } else { +- BUG(); +- } +-} +- +-void __init ath79_register_wdt(void) +-{ +- struct resource res; +- +- memset(&res, 0, sizeof(res)); +- +- res.flags = IORESOURCE_MEM; +- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL; +- res.end = res.start + 0x8 - 1; +- +- platform_device_register_simple("ath79-wdt", -1, &res, 1); +-} +- +-static struct ath79_gpio_platform_data ath79_gpio_pdata; +- +-static struct resource ath79_gpio_resources[] = { +- { +- .flags = IORESOURCE_MEM, +- .start = AR71XX_GPIO_BASE, +- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1, +- }, +- { +- .start = ATH79_MISC_IRQ(2), +- .end = ATH79_MISC_IRQ(2), +- .flags = IORESOURCE_IRQ, +- }, +-}; +- +-static struct platform_device ath79_gpio_device = { +- .name = "ath79-gpio", +- .id = -1, +- .resource = ath79_gpio_resources, +- .num_resources = ARRAY_SIZE(ath79_gpio_resources), +- .dev = { +- .platform_data = &ath79_gpio_pdata +- }, +-}; +- +-void __init ath79_gpio_init(void) +-{ +- if (soc_is_ar71xx()) { +- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT; +- } else if (soc_is_ar7240()) { +- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT; +- } else if (soc_is_ar7241() || soc_is_ar7242()) { +- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT; +- } else if (soc_is_ar913x()) { +- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT; +- } else if (soc_is_ar933x()) { +- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT; +- } else if (soc_is_ar934x()) { +- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; +- ath79_gpio_pdata.oe_inverted = 1; +- } else if (soc_is_qca955x()) { +- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; +- ath79_gpio_pdata.oe_inverted = 1; +- } else { +- BUG(); +- } +- +- platform_device_register(&ath79_gpio_device); +-} +--- a/arch/mips/ath79/dev-common.h ++++ /dev/null +@@ -1,18 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X common devices +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_COMMON_H +-#define _ATH79_DEV_COMMON_H +- +-void ath79_register_uart(void); +-void ath79_register_wdt(void); +- +-#endif /* _ATH79_DEV_COMMON_H */ +--- a/arch/mips/ath79/dev-gpio-buttons.c ++++ /dev/null +@@ -1,56 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X GPIO button support +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include "linux/init.h" +-#include "linux/slab.h" +-#include <linux/platform_device.h> +- +-#include "dev-gpio-buttons.h" +- +-void __init ath79_register_gpio_keys_polled(int id, +- unsigned poll_interval, +- unsigned nbuttons, +- struct gpio_keys_button *buttons) +-{ +- struct platform_device *pdev; +- struct gpio_keys_platform_data pdata; +- struct gpio_keys_button *p; +- int err; +- +- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL); +- if (!p) +- return; +- +- pdev = platform_device_alloc("gpio-keys-polled", id); +- if (!pdev) +- goto err_free_buttons; +- +- memset(&pdata, 0, sizeof(pdata)); +- pdata.poll_interval = poll_interval; +- pdata.nbuttons = nbuttons; +- pdata.buttons = p; +- +- err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); +- if (err) +- goto err_put_pdev; +- +- err = platform_device_add(pdev); +- if (err) +- goto err_put_pdev; +- +- return; +- +-err_put_pdev: +- platform_device_put(pdev); +- +-err_free_buttons: +- kfree(p); +-} +--- a/arch/mips/ath79/dev-gpio-buttons.h ++++ /dev/null +@@ -1,23 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X GPIO button support +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_GPIO_BUTTONS_H +-#define _ATH79_DEV_GPIO_BUTTONS_H +- +-#include <linux/input.h> +-#include <linux/gpio_keys.h> +- +-void ath79_register_gpio_keys_polled(int id, +- unsigned poll_interval, +- unsigned nbuttons, +- struct gpio_keys_button *buttons); +- +-#endif /* _ATH79_DEV_GPIO_BUTTONS_H */ +--- a/arch/mips/ath79/dev-leds-gpio.c ++++ /dev/null +@@ -1,54 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/slab.h> +-#include <linux/platform_device.h> +- +-#include "dev-leds-gpio.h" +- +-void __init ath79_register_leds_gpio(int id, +- unsigned num_leds, +- struct gpio_led *leds) +-{ +- struct platform_device *pdev; +- struct gpio_led_platform_data pdata; +- struct gpio_led *p; +- int err; +- +- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL); +- if (!p) +- return; +- +- pdev = platform_device_alloc("leds-gpio", id); +- if (!pdev) +- goto err_free_leds; +- +- memset(&pdata, 0, sizeof(pdata)); +- pdata.num_leds = num_leds; +- pdata.leds = p; +- +- err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); +- if (err) +- goto err_put_pdev; +- +- err = platform_device_add(pdev); +- if (err) +- goto err_put_pdev; +- +- return; +- +-err_put_pdev: +- platform_device_put(pdev); +- +-err_free_leds: +- kfree(p); +-} +--- a/arch/mips/ath79/dev-leds-gpio.h ++++ /dev/null +@@ -1,21 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_LEDS_GPIO_H +-#define _ATH79_DEV_LEDS_GPIO_H +- +-#include <linux/leds.h> +- +-void ath79_register_leds_gpio(int id, +- unsigned num_leds, +- struct gpio_led *leds); +- +-#endif /* _ATH79_DEV_LEDS_GPIO_H */ +--- a/arch/mips/ath79/dev-spi.c ++++ /dev/null +@@ -1,38 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X SPI controller device +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/platform_device.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "dev-spi.h" +- +-static struct resource ath79_spi_resources[] = { +- { +- .start = AR71XX_SPI_BASE, +- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, +- .flags = IORESOURCE_MEM, +- }, +-}; +- +-static struct platform_device ath79_spi_device = { +- .name = "ath79-spi", +- .id = -1, +- .resource = ath79_spi_resources, +- .num_resources = ARRAY_SIZE(ath79_spi_resources), +-}; +- +-void __init ath79_register_spi(struct ath79_spi_platform_data *pdata, +- struct spi_board_info const *info, +- unsigned n) +-{ +- spi_register_board_info(info, n); +- ath79_spi_device.dev.platform_data = pdata; +- platform_device_register(&ath79_spi_device); +-} +--- a/arch/mips/ath79/dev-spi.h ++++ /dev/null +@@ -1,22 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X SPI controller device +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_SPI_H +-#define _ATH79_DEV_SPI_H +- +-#include <linux/spi/spi.h> +-#include <asm/mach-ath79/ath79_spi_platform.h> +- +-void ath79_register_spi(struct ath79_spi_platform_data *pdata, +- struct spi_board_info const *info, +- unsigned n); +- +-#endif /* _ATH79_DEV_SPI_H */ +--- a/arch/mips/ath79/dev-usb.c ++++ /dev/null +@@ -1,242 +0,0 @@ +-/* +- * Atheros AR7XXX/AR9XXX USB Host Controller device +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15 BSP +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/kernel.h> +-#include <linux/init.h> +-#include <linux/delay.h> +-#include <linux/irq.h> +-#include <linux/dma-mapping.h> +-#include <linux/platform_device.h> +-#include <linux/usb/ehci_pdriver.h> +-#include <linux/usb/ohci_pdriver.h> +- +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "common.h" +-#include "dev-usb.h" +- +-static u64 ath79_usb_dmamask = DMA_BIT_MASK(32); +- +-static struct usb_ohci_pdata ath79_ohci_pdata = { +-}; +- +-static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { +- .has_synopsys_hc_bug = 1, +-}; +- +-static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { +- .caps_offset = 0x100, +- .has_tt = 1, +-}; +- +-static void __init ath79_usb_register(const char *name, int id, +- unsigned long base, unsigned long size, +- int irq, const void *data, +- size_t data_size) +-{ +- struct resource res[2]; +- struct platform_device *pdev; +- +- memset(res, 0, sizeof(res)); +- +- res[0].flags = IORESOURCE_MEM; +- res[0].start = base; +- res[0].end = base + size - 1; +- +- res[1].flags = IORESOURCE_IRQ; +- res[1].start = irq; +- res[1].end = irq; +- +- pdev = platform_device_register_resndata(NULL, name, id, +- res, ARRAY_SIZE(res), +- data, data_size); +- +- if (IS_ERR(pdev)) { +- pr_err("ath79: unable to register USB at %08lx, err=%d\n", +- base, (int) PTR_ERR(pdev)); +- return; +- } +- +- pdev->dev.dma_mask = &ath79_usb_dmamask; +- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); +-} +- +-#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ +- AR71XX_RESET_USB_PHY | \ +- AR71XX_RESET_USB_OHCI_DLL) +- +-static void __init ath79_usb_setup(void) +-{ +- void __iomem *usb_ctrl_base; +- +- ath79_device_reset_set(AR71XX_USB_RESET_MASK); +- mdelay(1000); +- ath79_device_reset_clear(AR71XX_USB_RESET_MASK); +- +- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); +- +- /* Turning on the Buff and Desc swap bits */ +- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); +- +- /* WAR for HW bug. Here it adjusts the duration between two SOFS */ +- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); +- +- iounmap(usb_ctrl_base); +- +- mdelay(900); +- +- ath79_usb_register("ohci-platform", -1, +- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE, +- ATH79_MISC_IRQ(6), +- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); +- +- ath79_usb_register("ehci-platform", -1, +- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1)); +-} +- +-static void __init ar7240_usb_setup(void) +-{ +- void __iomem *usb_ctrl_base; +- +- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); +- ath79_device_reset_set(AR7240_RESET_USB_HOST); +- +- mdelay(1000); +- +- ath79_device_reset_set(AR7240_RESET_OHCI_DLL); +- ath79_device_reset_clear(AR7240_RESET_USB_HOST); +- +- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); +- +- /* WAR for HW bug. Here it adjusts the duration between two SOFS */ +- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); +- +- iounmap(usb_ctrl_base); +- +- ath79_usb_register("ohci-platform", -1, +- AR7240_OHCI_BASE, AR7240_OHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); +-} +- +-static void __init ar724x_usb_setup(void) +-{ +- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); +- mdelay(10); +- +- ath79_device_reset_clear(AR724X_RESET_USB_HOST); +- mdelay(10); +- +- ath79_device_reset_clear(AR724X_RESET_USB_PHY); +- mdelay(10); +- +- ath79_usb_register("ehci-platform", -1, +- AR724X_EHCI_BASE, AR724X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +-} +- +-static void __init ar913x_usb_setup(void) +-{ +- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); +- mdelay(10); +- +- ath79_device_reset_clear(AR913X_RESET_USB_HOST); +- mdelay(10); +- +- ath79_device_reset_clear(AR913X_RESET_USB_PHY); +- mdelay(10); +- +- ath79_usb_register("ehci-platform", -1, +- AR913X_EHCI_BASE, AR913X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +-} +- +-static void __init ar933x_usb_setup(void) +-{ +- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); +- mdelay(10); +- +- ath79_device_reset_clear(AR933X_RESET_USB_HOST); +- mdelay(10); +- +- ath79_device_reset_clear(AR933X_RESET_USB_PHY); +- mdelay(10); +- +- ath79_usb_register("ehci-platform", -1, +- AR933X_EHCI_BASE, AR933X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +-} +- +-static void __init ar934x_usb_setup(void) +-{ +- u32 bootstrap; +- +- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) +- return; +- +- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); +- udelay(1000); +- +- ath79_device_reset_clear(AR934X_RESET_USB_PHY); +- udelay(1000); +- +- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG); +- udelay(1000); +- +- ath79_device_reset_clear(AR934X_RESET_USB_HOST); +- udelay(1000); +- +- ath79_usb_register("ehci-platform", -1, +- AR934X_EHCI_BASE, AR934X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +-} +- +-static void __init qca955x_usb_setup(void) +-{ +- ath79_usb_register("ehci-platform", 0, +- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, +- ATH79_IP3_IRQ(0), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +- +- ath79_usb_register("ehci-platform", 1, +- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, +- ATH79_IP3_IRQ(1), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +-} +- +-void __init ath79_register_usb(void) +-{ +- if (soc_is_ar71xx()) +- ath79_usb_setup(); +- else if (soc_is_ar7240()) +- ar7240_usb_setup(); +- else if (soc_is_ar7241() || soc_is_ar7242()) +- ar724x_usb_setup(); +- else if (soc_is_ar913x()) +- ar913x_usb_setup(); +- else if (soc_is_ar933x()) +- ar933x_usb_setup(); +- else if (soc_is_ar934x()) +- ar934x_usb_setup(); +- else if (soc_is_qca955x()) +- qca955x_usb_setup(); +- else +- BUG(); +-} +--- a/arch/mips/ath79/dev-usb.h ++++ /dev/null +@@ -1,17 +0,0 @@ +-/* +- * Atheros AR71XX/AR724X/AR913X USB Host Controller support +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_USB_H +-#define _ATH79_DEV_USB_H +- +-void ath79_register_usb(void); +- +-#endif /* _ATH79_DEV_USB_H */ +--- a/arch/mips/ath79/dev-wmac.c ++++ /dev/null +@@ -1,155 +0,0 @@ +-/* +- * Atheros AR913X/AR933X SoC built-in WMAC device support +- * +- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/delay.h> +-#include <linux/irq.h> +-#include <linux/platform_device.h> +-#include <linux/ath9k_platform.h> +- +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "dev-wmac.h" +- +-static struct ath9k_platform_data ath79_wmac_data; +- +-static struct resource ath79_wmac_resources[] = { +- { +- /* .start and .end fields are filled dynamically */ +- .flags = IORESOURCE_MEM, +- }, { +- /* .start and .end fields are filled dynamically */ +- .flags = IORESOURCE_IRQ, +- }, +-}; +- +-static struct platform_device ath79_wmac_device = { +- .name = "ath9k", +- .id = -1, +- .resource = ath79_wmac_resources, +- .num_resources = ARRAY_SIZE(ath79_wmac_resources), +- .dev = { +- .platform_data = &ath79_wmac_data, +- }, +-}; +- +-static void __init ar913x_wmac_setup(void) +-{ +- /* reset the WMAC */ +- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); +- mdelay(10); +- +- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); +- mdelay(10); +- +- ath79_wmac_resources[0].start = AR913X_WMAC_BASE; +- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; +- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); +- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); +-} +- +- +-static int ar933x_wmac_reset(void) +-{ +- ath79_device_reset_set(AR933X_RESET_WMAC); +- ath79_device_reset_clear(AR933X_RESET_WMAC); +- +- return 0; +-} +- +-static int ar933x_r1_get_wmac_revision(void) +-{ +- return ath79_soc_rev; +-} +- +-static void __init ar933x_wmac_setup(void) +-{ +- u32 t; +- +- ar933x_wmac_reset(); +- +- ath79_wmac_device.name = "ar933x_wmac"; +- +- ath79_wmac_resources[0].start = AR933X_WMAC_BASE; +- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; +- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); +- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); +- +- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); +- if (t & AR933X_BOOTSTRAP_REF_CLK_40) +- ath79_wmac_data.is_clk_25mhz = false; +- else +- ath79_wmac_data.is_clk_25mhz = true; +- +- if (ath79_soc_rev == 1) +- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; +- +- ath79_wmac_data.external_reset = ar933x_wmac_reset; +-} +- +-static void ar934x_wmac_setup(void) +-{ +- u32 t; +- +- ath79_wmac_device.name = "ar934x_wmac"; +- +- ath79_wmac_resources[0].start = AR934X_WMAC_BASE; +- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; +- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); +- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); +- +- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if (t & AR934X_BOOTSTRAP_REF_CLK_40) +- ath79_wmac_data.is_clk_25mhz = false; +- else +- ath79_wmac_data.is_clk_25mhz = true; +-} +- +-static void qca955x_wmac_setup(void) +-{ +- u32 t; +- +- ath79_wmac_device.name = "qca955x_wmac"; +- +- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE; +- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1; +- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); +- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); +- +- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); +- if (t & QCA955X_BOOTSTRAP_REF_CLK_40) +- ath79_wmac_data.is_clk_25mhz = false; +- else +- ath79_wmac_data.is_clk_25mhz = true; +-} +- +-void __init ath79_register_wmac(u8 *cal_data) +-{ +- if (soc_is_ar913x()) +- ar913x_wmac_setup(); +- else if (soc_is_ar933x()) +- ar933x_wmac_setup(); +- else if (soc_is_ar934x()) +- ar934x_wmac_setup(); +- else if (soc_is_qca955x()) +- qca955x_wmac_setup(); +- else +- BUG(); +- +- if (cal_data) +- memcpy(ath79_wmac_data.eeprom_data, cal_data, +- sizeof(ath79_wmac_data.eeprom_data)); +- +- platform_device_register(&ath79_wmac_device); +-} +--- a/arch/mips/ath79/dev-wmac.h ++++ /dev/null +@@ -1,17 +0,0 @@ +-/* +- * Atheros AR913X/AR933X SoC built-in WMAC device support +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_WMAC_H +-#define _ATH79_DEV_WMAC_H +- +-void ath79_register_wmac(u8 *cal_data); +- +-#endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -32,7 +32,6 @@ + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> + #include "common.h" +-#include "dev-common.h" + + #define ATH79_SYS_TYPE_LEN 64 + diff --git a/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch b/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch new file mode 100644 index 0000000000..a11be73d7a --- /dev/null +++ b/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch @@ -0,0 +1,95 @@ +From 00e4313da4609074fff134e61dd9ffe3fd37474d Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sun, 24 Jun 2018 09:39:41 +0200 +Subject: [PATCH 31/33] MIPS: ath79: drop !OF clock code + +With the target now being fully OF based, we can drop the legacy clock +registration code. All clocks are now probed via devicetree. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/ath79/clock.c | 56 ------------------------------------------------ + arch/mips/ath79/common.h | 3 --- + 2 files changed, 59 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -617,60 +617,6 @@ static void __init qca956x_clocks_init(v + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); + } + +-void __init ath79_clocks_init(void) +-{ +- const char *wdt; +- const char *uart; +- +- if (soc_is_ar71xx()) +- ar71xx_clocks_init(ath79_pll_base); +- else if (soc_is_ar724x() || soc_is_ar913x()) +- ar724x_clocks_init(ath79_pll_base); +- else if (soc_is_ar933x()) +- ar933x_clocks_init(ath79_pll_base); +- else if (soc_is_ar934x()) +- ar934x_clocks_init(ath79_pll_base); +- else if (soc_is_qca953x()) +- qca953x_clocks_init(ath79_pll_base); +- else if (soc_is_qca955x()) +- qca955x_clocks_init(ath79_pll_base); +- else if (soc_is_qca956x() || soc_is_tp9343()) +- qca956x_clocks_init(ath79_pll_base); +- else +- BUG(); +- +- if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) { +- wdt = "ahb"; +- uart = "ahb"; +- } else if (soc_is_ar933x()) { +- wdt = "ahb"; +- uart = "ref"; +- } else { +- wdt = "ref"; +- uart = "ref"; +- } +- +- clk_add_alias("wdt", NULL, wdt, NULL); +- clk_add_alias("uart", NULL, uart, NULL); +-} +- +-unsigned long __init +-ath79_get_sys_clk_rate(const char *id) +-{ +- struct clk *clk; +- unsigned long rate; +- +- clk = clk_get(NULL, id); +- if (IS_ERR(clk)) +- panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk)); +- +- rate = clk_get_rate(clk); +- clk_put(clk); +- +- return rate; +-} +- +-#ifdef CONFIG_OF + static void __init ath79_clocks_init_dt(struct device_node *np) + { + struct clk *ref_clk; +@@ -727,5 +673,3 @@ CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-p + CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt); + CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt); + CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt); +- +-#endif +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -19,9 +19,6 @@ + #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024) + #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024) + +-void ath79_clocks_init(void); +-unsigned long ath79_get_sys_clk_rate(const char *id); +- + void ath79_ddr_ctrl_init(void); + + #endif /* __ATH79_COMMON_H */ diff --git a/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch new file mode 100644 index 0000000000..1c38139323 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch @@ -0,0 +1,93 @@ +From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Sat, 23 Jun 2018 15:16:55 +0200 +Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols + +We no longer need to select which SoCs are supported as the whole arch +code is always built. So lets drop all the SoC symbols + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/Kconfig | 2 ++ + arch/mips/ath79/Kconfig | 44 +++++--------------------------------------- + arch/mips/pci/Makefile | 2 +- + 3 files changed, 8 insertions(+), 40 deletions(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -208,6 +208,8 @@ config ATH79 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT_UART_PROM ++ select HW_HAS_PCI ++ select USB_ARCH_HAS_EHCI + select USE_OF + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM + help +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1,48 +1,14 @@ + # SPDX-License-Identifier: GPL-2.0 + if ATH79 + +-config SOC_AR71XX +- select HW_HAS_PCI +- def_bool n +- +-config SOC_AR724X +- select HW_HAS_PCI +- select PCI_AR724X if PCI +- def_bool n +- +-config SOC_AR913X +- def_bool n +- +-config SOC_AR933X +- def_bool n +- +-config SOC_AR934X +- select HW_HAS_PCI +- select PCI_AR724X if PCI +- def_bool n +- +-config SOC_QCA955X +- select HW_HAS_PCI +- select PCI_AR724X if PCI ++config PCI_AR71XX ++ bool "PCI support for AR7100 type SoCs" ++ depends on PCI + def_bool n + + config PCI_AR724X +- def_bool n +- +-config ATH79_DEV_GPIO_BUTTONS +- def_bool n +- +-config ATH79_DEV_LEDS_GPIO +- def_bool n +- +-config ATH79_DEV_SPI +- def_bool n +- +-config ATH79_DEV_USB +- def_bool n +- +-config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) ++ bool "PCI support for AR724x type SoCs" ++ depends on PCI + def_bool n + + endif +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o + obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o +-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o ++obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o + obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o + # diff --git a/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch new file mode 100644 index 0000000000..aeb50c9b1c --- /dev/null +++ b/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch @@ -0,0 +1,73 @@ +From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Mon, 25 Jun 2018 15:52:34 +0200 +Subject: [PATCH 33/33] spi: ath79: drop pdata support + +The target is being converted to pure OF. We can therefore drop all of the +platform data code from the driver. + +Cc: linux-spi@vger.kernel.org +Acked-by: Mark Brown <broonie@kernel.org> +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/include/asm/mach-ath79/ath79_spi_platform.h | 19 ------------------- + drivers/spi/spi-ath79.c | 8 -------- + 2 files changed, 27 deletions(-) + delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h + +--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h ++++ /dev/null +@@ -1,19 +0,0 @@ +-/* +- * Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller +- * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_SPI_PLATFORM_H +-#define _ATH79_SPI_PLATFORM_H +- +-struct ath79_spi_platform_data { +- unsigned bus_num; +- unsigned num_chipselect; +-}; +- +-#endif /* _ATH79_SPI_PLATFORM_H */ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -26,7 +26,6 @@ + #include <linux/err.h> + + #include <asm/mach-ath79/ar71xx_regs.h> +-#include <asm/mach-ath79/ath79_spi_platform.h> + + #define DRV_NAME "ath79-spi" + +@@ -208,7 +207,6 @@ static int ath79_spi_probe(struct platfo + { + struct spi_master *master; + struct ath79_spi *sp; +- struct ath79_spi_platform_data *pdata; + struct resource *r; + unsigned long rate; + int ret; +@@ -223,15 +221,9 @@ static int ath79_spi_probe(struct platfo + master->dev.of_node = pdev->dev.of_node; + platform_set_drvdata(pdev, sp); + +- pdata = dev_get_platdata(&pdev->dev); +- + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; +- if (pdata) { +- master->bus_num = pdata->bus_num; +- master->num_chipselect = pdata->num_chipselect; +- } + + sp->bitbang.master = master; + sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch new file mode 100644 index 0000000000..6eec142c74 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch @@ -0,0 +1,27 @@ +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -34,11 +34,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq); + + enum ath79_soc_type ath79_soc; + unsigned int ath79_soc_rev; ++EXPORT_SYMBOL_GPL(ath79_soc_rev); + + void __iomem *ath79_pll_base; + void __iomem *ath79_reset_base; + EXPORT_SYMBOL_GPL(ath79_reset_base); +-static void __iomem *ath79_ddr_base; ++void __iomem *ath79_ddr_base; ++EXPORT_SYMBOL_GPL(ath79_ddr_base); + static void __iomem *ath79_ddr_wb_flush_base; + static void __iomem *ath79_ddr_pci_win_base; + +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -152,6 +152,7 @@ void ath79_ddr_wb_flush(unsigned int reg + void ath79_ddr_set_pci_windows(void); + + extern void __iomem *ath79_pll_base; ++extern void __iomem *ath79_ddr_base; + extern void __iomem *ath79_reset_base; + + static inline void ath79_pll_wr(unsigned reg, u32 val) diff --git a/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..9c728b91f5 --- /dev/null +++ b/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,165 @@ +From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 24/53] GPIO: add named gpio exports + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib-sysfs.c | 10 +++++- + include/asm-generic/gpio.h | 6 ++++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 91 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -23,6 +23,8 @@ + #include <linux/pinctrl/pinctrl.h> + #include <linux/slab.h> + #include <linux/gpio/machine.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> + + #include "gpiolib.h" + +@@ -654,3 +656,68 @@ void of_gpiochip_remove(struct gpio_chip + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ if (!gpio_is_valid(gpio)) ++ return gpio; ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++ .probe = of_gpio_export_probe, ++}; ++ ++module_platform_driver(gpio_export_driver); +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -568,7 +568,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -651,6 +653,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -531,6 +531,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_ + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -538,6 +539,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { diff --git a/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch new file mode 100644 index 0000000000..460c4580ee --- /dev/null +++ b/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch @@ -0,0 +1,139 @@ +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -54,11 +54,9 @@ + struct ar71xx_pci_controller { + struct device_node *np; + void __iomem *cfg_base; +- int irq; + struct pci_controller pci_ctrl; + struct resource io_res; + struct resource mem_res; +- struct irq_domain *domain; + }; + + /* Byte lane enable bits */ +@@ -230,104 +228,6 @@ static struct pci_ops ar71xx_pci_ops = { + .write = ar71xx_pci_write_config, + }; + +-static void ar71xx_pci_irq_handler(struct irq_desc *desc) +-{ +- void __iomem *base = ath79_reset_base; +- struct irq_chip *chip = irq_desc_get_chip(desc); +- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc); +- u32 pending; +- +- chained_irq_enter(chip, desc); +- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- if (pending & AR71XX_PCI_INT_DEV0) +- generic_handle_irq(irq_linear_revmap(apc->domain, 1)); +- +- else if (pending & AR71XX_PCI_INT_DEV1) +- generic_handle_irq(irq_linear_revmap(apc->domain, 2)); +- +- else if (pending & AR71XX_PCI_INT_DEV2) +- generic_handle_irq(irq_linear_revmap(apc->domain, 3)); +- +- else if (pending & AR71XX_PCI_INT_CORE) +- generic_handle_irq(irq_linear_revmap(apc->domain, 4)); +- +- else +- spurious_interrupt(); +- chained_irq_exit(chip, desc); +-} +- +-static void ar71xx_pci_irq_unmask(struct irq_data *d) +-{ +- struct ar71xx_pci_controller *apc; +- unsigned int irq; +- void __iomem *base = ath79_reset_base; +- u32 t; +- +- apc = irq_data_get_irq_chip_data(d); +- irq = irq_linear_revmap(apc->domain, d->irq); +- +- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- /* flush write */ +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +-} +- +-static void ar71xx_pci_irq_mask(struct irq_data *d) +-{ +- struct ar71xx_pci_controller *apc; +- unsigned int irq; +- void __iomem *base = ath79_reset_base; +- u32 t; +- +- apc = irq_data_get_irq_chip_data(d); +- irq = irq_linear_revmap(apc->domain, d->irq); +- +- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- /* flush write */ +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +-} +- +-static struct irq_chip ar71xx_pci_irq_chip = { +- .name = "AR71XX PCI", +- .irq_mask = ar71xx_pci_irq_mask, +- .irq_unmask = ar71xx_pci_irq_unmask, +- .irq_mask_ack = ar71xx_pci_irq_mask, +-}; +- +-static int ar71xx_pci_irq_map(struct irq_domain *d, +- unsigned int irq, irq_hw_number_t hw) +-{ +- struct ar71xx_pci_controller *apc = d->host_data; +- +- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq); +- irq_set_chip_data(irq, apc); +- +- return 0; +-} +- +-static const struct irq_domain_ops ar71xx_pci_domain_ops = { +- .xlate = irq_domain_xlate_onecell, +- .map = ar71xx_pci_irq_map, +-}; +- +-static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) +-{ +- void __iomem *base = ath79_reset_base; +- +- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); +- +- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT, +- &ar71xx_pci_domain_ops, apc); +- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler, +- apc); +-} +- + static void ar71xx_pci_reset(void) + { + ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE); +@@ -361,10 +261,6 @@ static int ar71xx_pci_probe(struct platf + if (IS_ERR(apc->cfg_base)) + return PTR_ERR(apc->cfg_base); + +- apc->irq = platform_get_irq(pdev, 0); +- if (apc->irq < 0) +- return -EINVAL; +- + ar71xx_pci_reset(); + + /* setup COMMAND register */ +@@ -375,8 +271,6 @@ static int ar71xx_pci_probe(struct platf + /* clear bus errors */ + ar71xx_pci_check_error(apc, 1); + +- ar71xx_pci_irq_init(apc); +- + apc->np = pdev->dev.of_node; + apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; + apc->pci_ctrl.mem_resource = &apc->mem_res; diff --git a/target/linux/ath79/patches-4.19/0037-missing-registers.patch b/target/linux/ath79/patches-4.19/0037-missing-registers.patch new file mode 100644 index 0000000000..9fde3d39df --- /dev/null +++ b/target/linux/ath79/patches-4.19/0037-missing-registers.patch @@ -0,0 +1,21 @@ +commit f3ffac90bc7266b7d917616f3233f58e8c08a196 +Author: Christian Lamparter <chunkeey@gmail.com> +Date: Fri Aug 10 23:24:47 2018 +0200 + + ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344 + + Signed-off-by: Christian Lamparter <chunkeey@gmail.com> + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1229,6 +1229,10 @@ + #define AR934X_ETH_CFG_RDV_DELAY BIT(16) + #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3 + #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 ++#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18 ++#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20 + + /* + * QCA953X GMAC Interface diff --git a/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch new file mode 100644 index 0000000000..78899c45e3 --- /dev/null +++ b/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch @@ -0,0 +1,18 @@ +HACK: register the GPIO driver earlier to ensure that gpio_request calls +from mach files succeed. + +--- a/drivers/gpio/gpio-ath79.c ++++ b/drivers/gpio/gpio-ath79.c +@@ -325,7 +325,11 @@ static struct platform_driver ath79_gpio + .remove = ath79_gpio_remove, + }; + +-module_platform_driver(ath79_gpio_driver); ++static int __init ath79_gpio_init(void) ++{ ++ return platform_driver_register(&ath79_gpio_driver); ++} ++postcore_initcall(ath79_gpio_init); + + MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); + MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch new file mode 100644 index 0000000000..eeda620957 --- /dev/null +++ b/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch @@ -0,0 +1,64 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1634,8 +1634,8 @@ static int __xipram do_write_oneword(str + break; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, datum)) ++ goto enable_xip; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1651,6 +1651,8 @@ static int __xipram do_write_oneword(str + + ret = -EIO; + } ++ ++ enable_xip: + xip_enable(map, chip, adr); + op_done: + if (mode == FL_OTP_WRITE) +@@ -2229,7 +2231,6 @@ static int cfi_amdstd_panic_write(struct + return 0; + } + +- + /* + * Handle devices with one erase region, that only implement + * the chip erase command. +@@ -2297,7 +2298,7 @@ static int __xipram do_erase_chip(struct + } + + if (chip_good(map, adr, map_word_ff(map))) +- break; ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -2321,6 +2322,7 @@ static int __xipram do_erase_chip(struct + } + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); +@@ -2393,7 +2395,7 @@ static int __xipram do_erase_oneblock(st + } + + if (chip_good(map, adr, map_word_ff(map))) +- break; ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -2417,6 +2419,7 @@ static int __xipram do_erase_oneblock(st + } + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); diff --git a/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch new file mode 100644 index 0000000000..22e31db3fa --- /dev/null +++ b/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch @@ -0,0 +1,20 @@ +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -1,2 +1,3 @@ ++obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o + obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -1,3 +1,11 @@ ++config MTD_PARSER_CYBERTAN ++ tristate "Parser for Cybertan format partitions" ++ depends on MTD && (ATH79 || COMPILE_TEST) ++ help ++ Cybertan has a proprietory header than encompasses a Broadcom trx ++ header. This driver will parse the header and take care of the ++ special offsets that result in the extra headers. ++ + config MTD_PARSER_TRX + tristate "Parser for TRX format partitions" + depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST) diff --git a/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch b/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch new file mode 100644 index 0000000000..16fe5ed272 --- /dev/null +++ b/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -193,6 +193,12 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_TPLINK_PARTS ++ tristate "TP-Link AR7XXX/AR9XXX partitioning support" ++ depends on ATH79 ++ ---help--- ++ TBD. ++ + comment "User Modules And Translation Layers" + + # +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + obj-y += parsers/ ++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch b/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch new file mode 100644 index 0000000000..6377db0ac2 --- /dev/null +++ b/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -5,7 +5,7 @@ + config NET_VENDOR_ATHEROS + bool "Atheros devices" + default y +- depends on PCI ++ depends on (PCI || ATH79) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + +@@ -78,4 +78,6 @@ config ALX + To compile this driver as a module, choose M here. The module + will be called alx. + ++source drivers/net/ethernet/atheros/ag71xx/Kconfig ++ + endif # NET_VENDOR_ATHEROS +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -3,6 +3,7 @@ + # Makefile for the Atheros network device drivers. + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_ATL1) += atlx/ + obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch new file mode 100644 index 0000000000..4c6558db90 --- /dev/null +++ b/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch @@ -0,0 +1,12 @@ +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -80,8 +80,8 @@ obj-y += scsi/ + obj-y += nvme/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPMI) += spmi/ + obj-$(CONFIG_HSI) += hsi/ + obj-$(CONFIG_SLIMBUS) += slimbus/ diff --git a/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch new file mode 100644 index 0000000000..634ce56354 --- /dev/null +++ b/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch @@ -0,0 +1,98 @@ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h +@@ -0,0 +1,37 @@ ++/* ++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H ++#define __ASM_MACH_ATH79_MANGLE_PORT_H ++ ++#ifdef CONFIG_PCI_AR71XX ++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); ++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); ++#else ++#define ath79_pci_swizzle_b(port) (port) ++#define ath79_pci_swizzle_w(port) (port) ++#endif ++ ++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) ++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) ++#define __swizzle_addr_l(port) (port) ++#define __swizzle_addr_q(port) (port) ++ ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define __mem_ioswabw(a, x) cpu_to_le16(x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabl(a, x) cpu_to_le32(x) ++# define ioswabq(a, x) (x) ++# define __mem_ioswabq(a, x) cpu_to_le64(x) ++ ++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -71,6 +71,45 @@ static const u32 ar71xx_pci_read_mask[8] + 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0 + }; + ++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); ++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); ++ ++static inline bool ar71xx_is_pci_addr(unsigned long port) ++{ ++ unsigned long phys = CPHYSADDR(port); ++ ++ return (phys >= AR71XX_PCI_MEM_BASE && ++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); ++} ++ ++static unsigned long ar71xx_pci_swizzle_b(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; ++} ++ ++static unsigned long ar71xx_pci_swizzle_w(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; ++} ++ ++unsigned long ath79_pci_swizzle_b(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_b) ++ return __ath79_pci_swizzle_b(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_b); ++ ++unsigned long ath79_pci_swizzle_w(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_w) ++ return __ath79_pci_swizzle_w(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_w); ++ + static inline u32 ar71xx_pci_get_ble(int where, int size, int local) + { + u32 t; +@@ -279,6 +318,9 @@ static int ar71xx_pci_probe(struct platf + + register_pci_controller(&apc->pci_ctrl); + ++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; ++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; ++ + return 0; + } + diff --git a/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch new file mode 100644 index 0000000000..4e2a6fecee --- /dev/null +++ b/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch @@ -0,0 +1,103 @@ +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -239,6 +239,37 @@ int ehci_reset(struct ehci_hcd *ehci) + command |= CMD_RESET; + dbg_cmd (ehci, "reset", command); + ehci_writel(ehci, command, &ehci->regs->command); ++ ++ if (ehci->qca_force_host_mode) { ++ u32 usbmode; ++ ++ udelay(1000); ++ ++ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); ++ usbmode |= USBMODE_CM_HC | (1 << 4); ++ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); ++ ++ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", ++ ehci_readl(ehci, &ehci->regs->usbmode)); ++ } ++ ++ if (ehci->qca_force_16bit_ptw) { ++ u32 port_status; ++ ++ udelay(1000); ++ ++ /* enable 16-bit UTMI interface */ ++ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); ++ port_status |= BIT(28); ++ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); ++ ++ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", ++ ehci_readl(ehci, &ehci->regs->port_status[0])); ++ } ++ ++ if (ehci->reset_notifier) ++ ehci->reset_notifier(ehci_to_hcd(ehci)); ++ + ehci->rh_state = EHCI_RH_HALTED; + ehci->next_statechange = jiffies; + retval = ehci_handshake(ehci, &ehci->regs->command, +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -219,6 +219,10 @@ struct ehci_hcd { /* one per controlle + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ ++ ++ void (*reset_notifier)(struct usb_hcd *hcd); + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) +--- a/include/linux/usb/ehci_pdriver.h ++++ b/include/linux/usb/ehci_pdriver.h +@@ -51,6 +51,8 @@ struct usb_ehci_pdata { + unsigned reset_on_resume:1; + unsigned dma_mask_64:1; + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); +@@ -60,6 +62,7 @@ struct usb_ehci_pdata { + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); + int (*pre_setup)(struct usb_hcd *hcd); ++ void (*reset_notifier)(struct platform_device *pdev); + }; + + #endif /* __USB_CORE_EHCI_PDRIVER_H */ +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -48,6 +48,14 @@ struct ehci_platform_priv { + + static const char hcd_name[] = "ehci-platform"; + ++static void ehci_platform_reset_notifier(struct usb_hcd *hcd) ++{ ++ struct platform_device *pdev = to_platform_device(hcd->self.controller); ++ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; ++ ++ pdata->reset_notifier(pdev); ++} ++ + static int ehci_platform_reset(struct usb_hcd *hcd) + { + struct platform_device *pdev = to_platform_device(hcd->self.controller); +@@ -215,6 +223,13 @@ static int ehci_platform_probe(struct pl + priv->reset_on_resume = true; + if (pdata->ignore_oc) + ehci->ignore_oc = 1; ++ if (pdata->qca_force_host_mode) ++ ehci->qca_force_host_mode = 1; ++ if (pdata->qca_force_16bit_ptw) ++ ehci->qca_force_16bit_ptw = 1; ++ ++ if (pdata->reset_notifier) ++ ehci->reset_notifier = ehci_platform_reset_notifier; + + #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { diff --git a/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch new file mode 100644 index 0000000000..8f8f349a66 --- /dev/null +++ b/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch @@ -0,0 +1,32 @@ +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb + static int mdiobb_read(struct mii_bus *bus, int phy, int reg) + { + struct mdiobb_ctrl *ctrl = bus->priv; +- int ret, i; ++ int ret; + + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); +@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b + + ctrl->ops->set_mdio_dir(ctrl, 0); + +- /* check the turnaround bit: the PHY should be driving it to zero, if this +- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that +- */ +- if (mdiobb_get_bit(ctrl) != 0 && +- !(bus->phy_ignore_ta_mask & (1 << phy))) { +- /* PHY didn't drive TA low -- flush any bits it +- * may be trying to send. +- */ +- for (i = 0; i < 32; i++) +- mdiobb_get_bit(ctrl); +- +- return 0xffff; +- } ++ mdiobb_get_bit(ctrl); + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); diff --git a/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch new file mode 100644 index 0000000000..a830346a31 --- /dev/null +++ b/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch @@ -0,0 +1,61 @@ +From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Tue, 16 Jun 2015 13:15:08 +0200 +Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command + +It seems some phys have some maximum timings for accessing the MDIO line, +resulting in bit errors under cpu stress. Prevent this from happening by +disabling interrupts when sending commands. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + drivers/net/phy/mdio-bitbang.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -17,6 +17,7 @@ + * kind, whether express or implied. + */ + ++#include <linux/irqflags.h> + #include <linux/module.h> + #include <linux/mdio-bitbang.h> + #include <linux/types.h> +@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b + { + struct mdiobb_ctrl *ctrl = bus->priv; + int ret; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg); +@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); ++ + return ret; + } + + static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) + { + struct mdiobb_ctrl *ctrl = bus->priv; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg); +@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus * + + ctrl->ops->set_mdio_dir(ctrl, 0); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); ++ + return 0; + } + diff --git a/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch new file mode 100644 index 0000000000..dcc0e8b3c6 --- /dev/null +++ b/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch @@ -0,0 +1,891 @@ +--- a/arch/mips/include/asm/checksum.h ++++ b/arch/mips/include/asm/checksum.h +@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = net_hdr_word(word++); ++ ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co + return csum_fold(csum_partial(buff, len, 0)); + } + +-#define _HAVE_ARCH_IPV6_CSUM +-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, +- const struct in6_addr *daddr, +- __u32 len, __u8 proto, +- __wsum sum) +-{ +- __wsum tmp; +- +- __asm__( +- " .set push # csum_ipv6_magic\n" +- " .set noreorder \n" +- " .set noat \n" +- " addu %0, %5 # proto (long in network byte order)\n" +- " sltu $1, %0, %5 \n" +- " addu %0, $1 \n" +- +- " addu %0, %6 # csum\n" +- " sltu $1, %0, %6 \n" +- " lw %1, 0(%2) # four words source address\n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 0(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " addu %0, $1 # Add final carry\n" +- " .set pop" +- : "=&r" (sum), "=&r" (tmp) +- : "r" (saddr), "r" (daddr), +- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)); +- +- return csum_fold(sum); +-} +- + #include <asm-generic/checksum.h> + #endif /* CONFIG_GENERIC_CSUM */ + +--- a/include/uapi/linux/ip.h ++++ b/include/uapi/linux/ip.h +@@ -103,7 +103,7 @@ struct iphdr { + __be32 saddr; + __be32 daddr; + /*The options start here. */ +-}; ++} __attribute__((packed, aligned(2))); + + + struct ip_auth_hdr { +--- a/include/uapi/linux/ipv6.h ++++ b/include/uapi/linux/ipv6.h +@@ -131,7 +131,7 @@ struct ipv6hdr { + + struct in6_addr saddr; + struct in6_addr daddr; +-}; ++} __attribute__((packed, aligned(2))); + + + /* index values for the variables in ipv6_devconf */ +--- a/include/uapi/linux/tcp.h ++++ b/include/uapi/linux/tcp.h +@@ -55,7 +55,7 @@ struct tcphdr { + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __attribute__((packed, aligned(2))); + + /* + * The union cast uses a gcc extension to avoid aliasing problems +@@ -65,7 +65,7 @@ struct tcphdr { + union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +-}; ++} __attribute__((packed, aligned(2))); + + #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) + +--- a/include/uapi/linux/udp.h ++++ b/include/uapi/linux/udp.h +@@ -25,7 +25,7 @@ struct udphdr { + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __attribute__((packed, aligned(2))); + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ +--- a/net/netfilter/nf_conntrack_core.c ++++ b/net/netfilter/nf_conntrack_core.c +@@ -262,8 +262,8 @@ static bool ipv4_pkt_to_tuple(const stru + + switch (l3num) { + case NFPROTO_IPV4: +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = net_hdr_word(ap++); ++ tuple->dst.u3.ip = net_hdr_word(ap); + break; + case NFPROTO_IPV6: + memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6)); +--- a/include/uapi/linux/icmp.h ++++ b/include/uapi/linux/icmp.h +@@ -82,7 +82,7 @@ struct icmphdr { + } frag; + __u8 reserved[4]; + } un; +-}; ++} __attribute__((packed, aligned(2))); + + + /* +--- a/include/uapi/linux/in6.h ++++ b/include/uapi/linux/in6.h +@@ -43,7 +43,7 @@ struct in6_addr { + #define s6_addr16 in6_u.u6_addr16 + #define s6_addr32 in6_u.u6_addr32 + #endif +-}; ++} __attribute__((packed, aligned(2))); + #endif /* __UAPI_DEF_IN6_ADDR */ + + #if __UAPI_DEF_SOCKADDR_IN6 +--- a/net/ipv6/tcp_ipv6.c ++++ b/net/ipv6/tcp_ipv6.c +@@ -39,6 +39,7 @@ + #include <linux/ipsec.h> + #include <linux/times.h> + #include <linux/slab.h> ++#include <asm/unaligned.h> + #include <linux/uaccess.h> + #include <linux/ipv6.h> + #include <linux/icmpv6.h> +@@ -836,10 +837,10 @@ static void tcp_v6_send_response(const s + topt = (__be32 *)(t1 + 1); + + if (tsecr) { +- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); +- *topt++ = htonl(tsval); +- *topt++ = htonl(tsecr); ++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); ++ put_unaligned_be32(tsval, topt++); ++ put_unaligned_be32(tsecr, topt++); + } + + #ifdef CONFIG_TCP_MD5SIG +--- a/include/linux/ipv6.h ++++ b/include/linux/ipv6.h +@@ -6,6 +6,7 @@ + + #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) + #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) ++ + /* + * This structure contains configuration options per IPv6 link. + */ +--- a/net/ipv6/datagram.c ++++ b/net/ipv6/datagram.c +@@ -477,7 +477,7 @@ int ipv6_recv_error(struct sock *sk, str + ipv6_iface_scope_id(&sin->sin6_addr, + IP6CB(skb)->iif); + } else { +- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), ++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), + &sin->sin6_addr); + sin->sin6_scope_id = 0; + } +@@ -829,12 +829,12 @@ int ip6_datagram_send_ctl(struct net *ne + } + + if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { +- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { ++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { + err = -EINVAL; + goto exit_f; + } + } +- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); ++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); + break; + + case IPV6_2292HOPOPTS: +--- a/net/ipv6/ip6_gre.c ++++ b/net/ipv6/ip6_gre.c +@@ -452,7 +452,7 @@ static void ip6gre_err(struct sk_buff *s + return; + ipv6h = (const struct ipv6hdr *)skb->data; + greh = (const struct gre_base_hdr *)(skb->data + offset); +- key = key_off ? *(__be32 *)(skb->data + key_off) : 0; ++ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0; + + t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, + key, greh->protocol); +--- a/net/ipv6/exthdrs.c ++++ b/net/ipv6/exthdrs.c +@@ -756,7 +756,7 @@ static bool ipv6_hop_jumbo(struct sk_buf + goto drop; + } + +- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); ++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); + if (pkt_len <= IPV6_MAXPLEN) { + __IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS); + icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2); +--- a/include/linux/types.h ++++ b/include/linux/types.h +@@ -230,5 +230,11 @@ struct callback_head { + typedef void (*rcu_callback_t)(struct rcu_head *head); + typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func); + ++struct net_hdr_word { ++ u32 words[1]; ++} __attribute__((packed, aligned(2))); ++ ++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) ++ + #endif /* __ASSEMBLY__ */ + #endif /* _LINUX_TYPES_H */ +--- a/net/ipv4/af_inet.c ++++ b/net/ipv4/af_inet.c +@@ -1422,8 +1422,8 @@ struct sk_buff **inet_gro_receive(struct + if (unlikely(ip_fast_csum((u8 *)iph, 5))) + goto out_unlock; + +- id = ntohl(*(__be32 *)&iph->id); +- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); ++ id = ntohl(net_hdr_word(&iph->id)); ++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); + id >>= 16; + + list_for_each_entry(p, head, list) { +--- a/net/ipv4/route.c ++++ b/net/ipv4/route.c +@@ -448,7 +448,7 @@ static struct neighbour *ipv4_neigh_look + else if (skb) + pkey = &ip_hdr(skb)->daddr; + +- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); ++ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); + if (n) + return n; + return neigh_create(&arp_tbl, pkey, dev); +--- a/net/ipv4/tcp_output.c ++++ b/net/ipv4/tcp_output.c +@@ -461,48 +461,53 @@ static void tcp_options_write(__be32 *pt + u16 options = opts->options; /* mungable copy */ + + if (unlikely(OPTION_MD5 & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); + /* overload cookie hash location */ + opts->hash_location = (__u8 *)ptr; + ptr += 4; + } + + if (unlikely(opts->mss)) { +- *ptr++ = htonl((TCPOPT_MSS << 24) | +- (TCPOLEN_MSS << 16) | +- opts->mss); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | ++ opts->mss); + } + + if (likely(OPTION_TS & options)) { + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | +- (TCPOLEN_SACK_PERM << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_SACK_PERM << 24) | ++ (TCPOLEN_SACK_PERM << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + options &= ~OPTION_SACK_ADVERTISE; + } else { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + } +- *ptr++ = htonl(opts->tsval); +- *ptr++ = htonl(opts->tsecr); ++ net_hdr_word(ptr++) = htonl(opts->tsval); ++ net_hdr_word(ptr++) = htonl(opts->tsecr); + } + + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK_PERM << 8) | +- TCPOLEN_SACK_PERM); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK_PERM << 8) | ++ TCPOLEN_SACK_PERM); + } + + if (unlikely(OPTION_WSCALE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_WINDOW << 16) | +- (TCPOLEN_WINDOW << 8) | +- opts->ws); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_WINDOW << 16) | ++ (TCPOLEN_WINDOW << 8) | ++ opts->ws); + } + + if (unlikely(opts->num_sack_blocks)) { +@@ -510,16 +515,17 @@ static void tcp_options_write(__be32 *pt + tp->duplicate_sack : tp->selective_acks; + int this_sack; + +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK << 8) | +- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK << 8) | ++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * + TCPOLEN_SACK_PERBLOCK))); + + for (this_sack = 0; this_sack < opts->num_sack_blocks; + ++this_sack) { +- *ptr++ = htonl(sp[this_sack].start_seq); +- *ptr++ = htonl(sp[this_sack].end_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); + } + + tp->rx_opt.dsack = 0; +@@ -532,13 +538,14 @@ static void tcp_options_write(__be32 *pt + + if (foc->exp) { + len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; +- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) | ++ net_hdr_word(ptr) = ++ htonl((TCPOPT_EXP << 24) | (len << 16) | + TCPOPT_FASTOPEN_MAGIC); + p += TCPOLEN_EXP_FASTOPEN_BASE; + } else { + len = TCPOLEN_FASTOPEN_BASE + foc->len; +- *p++ = TCPOPT_FASTOPEN; +- *p++ = len; ++ net_hdr_word(p++) = TCPOPT_FASTOPEN; ++ net_hdr_word(p++) = len; + } + + memcpy(p, foc->val, foc->len); +--- a/include/uapi/linux/igmp.h ++++ b/include/uapi/linux/igmp.h +@@ -33,7 +33,7 @@ struct igmphdr { + __u8 code; /* For newer IGMP */ + __sum16 csum; + __be32 group; +-}; ++} __attribute__((packed, aligned(2))); + + /* V3 group record types [grec_type] */ + #define IGMPV3_MODE_IS_INCLUDE 1 +@@ -49,7 +49,7 @@ struct igmpv3_grec { + __be16 grec_nsrcs; + __be32 grec_mca; + __be32 grec_src[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_report { + __u8 type; +@@ -58,7 +58,7 @@ struct igmpv3_report { + __be16 resv2; + __be16 ngrec; + struct igmpv3_grec grec[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_query { + __u8 type; +@@ -79,7 +79,7 @@ struct igmpv3_query { + __u8 qqic; + __be16 nsrcs; + __be32 srcs[0]; +-}; ++} __attribute__((packed, aligned(2))); + + #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ + #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ +--- a/net/core/flow_dissector.c ++++ b/net/core/flow_dissector.c +@@ -111,7 +111,7 @@ __be32 __skb_flow_get_ports(const struct + ports = __skb_header_pointer(skb, thoff + poff, + sizeof(_ports), data, hlen, &_ports); + if (ports) +- return *ports; ++ return (__be32)net_hdr_word(ports); + } + + return 0; +--- a/include/uapi/linux/icmpv6.h ++++ b/include/uapi/linux/icmpv6.h +@@ -77,7 +77,7 @@ struct icmp6hdr { + #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other + #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime + #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +-}; ++} __attribute__((packed, aligned(2))); + + + #define ICMPV6_ROUTER_PREF_LOW 0x3 +--- a/include/net/ndisc.h ++++ b/include/net/ndisc.h +@@ -89,7 +89,7 @@ struct ra_msg { + struct icmp6hdr icmph; + __be32 reachable_time; + __be32 retrans_timer; +-}; ++} __attribute__((packed, aligned(2))); + + struct rd_msg { + struct icmp6hdr icmph; +@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi + { + const u32 *p32 = pkey; + +- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + +- (p32[1] * hash_rnd[1]) + +- (p32[2] * hash_rnd[2]) + +- (p32[3] * hash_rnd[3])); ++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + ++ (net_hdr_word(&p32[1]) * hash_rnd[1]) + ++ (net_hdr_word(&p32[2]) * hash_rnd[2]) + ++ (net_hdr_word(&p32[3]) * hash_rnd[3])); + } + + static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) +--- a/net/sched/cls_u32.c ++++ b/net/sched/cls_u32.c +@@ -165,7 +165,7 @@ next_knode: + data = skb_header_pointer(skb, toff, 4, &hdata); + if (!data) + goto out; +- if ((*data ^ key->val) & key->mask) { ++ if ((net_hdr_word(data) ^ key->val) & key->mask) { + n = rcu_dereference_bh(n->next); + goto next_knode; + } +@@ -218,8 +218,8 @@ check_terminal: + &hdata); + if (!data) + goto out; +- sel = ht->divisor & u32_hash_fold(*data, &n->sel, +- n->fshift); ++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), ++ &n->sel, n->fshift); + } + if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) + goto next_ht; +--- a/net/ipv6/ip6_offload.c ++++ b/net/ipv6/ip6_offload.c +@@ -223,7 +223,7 @@ static struct sk_buff **ipv6_gro_receive + continue; + + iph2 = (struct ipv6hdr *)(p->data + off); +- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; ++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); + + /* All fields must match except length and Traffic Class. + * XXX skbs on the gro_list have all been parsed and pulled +--- a/include/net/addrconf.h ++++ b/include/net/addrconf.h +@@ -47,7 +47,7 @@ struct prefix_info { + __be32 reserved2; + + struct in6_addr prefix; +-}; ++} __attribute__((packed, aligned(2))); + + #include <linux/netdevice.h> + #include <net/if_inet6.h> +--- a/include/net/inet_ecn.h ++++ b/include/net/inet_ecn.h +@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct + if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) + return 0; + +- from = *(__be32 *)iph; ++ from = net_hdr_word(iph); + to = from | htonl(INET_ECN_CE << 20); +- *(__be32 *)iph = to; ++ net_hdr_word(iph) = to; + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), + (__force __wsum)to); +--- a/include/net/ipv6.h ++++ b/include/net/ipv6.h +@@ -149,7 +149,7 @@ struct frag_hdr { + __u8 reserved; + __be16 frag_off; + __be32 identification; +-}; ++} __attribute__((packed, aligned(2))); + + #define IP6_MF 0x0001 + #define IP6_OFFSET 0xFFF8 +@@ -499,8 +499,8 @@ static inline void __ipv6_addr_set_half( + } + #endif + #endif +- addr[0] = wh; +- addr[1] = wl; ++ net_hdr_word(&addr[0]) = wh; ++ net_hdr_word(&addr[1]) = wl; + } + + static inline void ipv6_addr_set(struct in6_addr *addr, +@@ -559,6 +559,8 @@ static inline bool ipv6_prefix_equal(con + const __be32 *a1 = addr1->s6_addr32; + const __be32 *a2 = addr2->s6_addr32; + unsigned int pdw, pbi; ++ /* Used for last <32-bit fraction of prefix */ ++ u32 pbia1, pbia2; + + /* check complete u32 in prefix */ + pdw = prefixlen >> 5; +@@ -567,7 +569,9 @@ static inline bool ipv6_prefix_equal(con + + /* check incomplete u32 in prefix */ + pbi = prefixlen & 0x1f; +- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) ++ pbia1 = net_hdr_word(&a1[pdw]); ++ pbia2 = net_hdr_word(&a2[pdw]); ++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) + return false; + + return true; +@@ -683,13 +687,13 @@ static inline void ipv6_addr_set_v4mappe + */ + static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) + { +- const __be32 *a1 = token1, *a2 = token2; ++ const struct in6_addr *a1 = token1, *a2 = token2; + int i; + + addrlen >>= 2; + + for (i = 0; i < addrlen; i++) { +- __be32 xb = a1[i] ^ a2[i]; ++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; + if (xb) + return i * 32 + 31 - __fls(ntohl(xb)); + } +@@ -876,17 +880,18 @@ static inline int ip6_default_np_autolab + static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, + __be32 flowlabel) + { +- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; ++ net_hdr_word((__be32 *)hdr) = ++ htonl(0x60000000 | (tclass << 20)) | flowlabel; + } + + static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; + } + + static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; + } + + static inline u8 ip6_tclass(__be32 flowinfo) +--- a/include/net/secure_seq.h ++++ b/include/net/secure_seq.h +@@ -3,6 +3,7 @@ + #define _NET_SECURE_SEQ + + #include <linux/types.h> ++#include <linux/in6.h> + + u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); + u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, +--- a/include/uapi/linux/in.h ++++ b/include/uapi/linux/in.h +@@ -84,7 +84,7 @@ enum { + /* Internet address. */ + struct in_addr { + __be32 s_addr; +-}; ++} __attribute__((packed, aligned(2))); + #endif + + #define IP_TOS 1 +--- a/net/ipv6/ip6_fib.c ++++ b/net/ipv6/ip6_fib.c +@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t + * See include/asm-generic/bitops/le.h. + */ + return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & +- addr[fn_bit >> 5]; ++ net_hdr_word(&addr[fn_bit >> 5]); + } + + struct fib6_info *fib6_info_alloc(gfp_t gfp_flags) +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -423,7 +423,7 @@ static void tcp_sack(const struct sk_buf + + /* Fast path for timestamp-only option */ + if (length == TCPOLEN_TSTAMP_ALIGNED +- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) ++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) + | (TCPOPT_NOP << 16) + | (TCPOPT_TIMESTAMP << 8) + | TCPOLEN_TIMESTAMP)) +--- a/net/xfrm/xfrm_input.c ++++ b/net/xfrm/xfrm_input.c +@@ -194,8 +194,8 @@ int xfrm_parse_spi(struct sk_buff *skb, + if (!pskb_may_pull(skb, hlen)) + return -EINVAL; + +- *spi = *(__be32 *)(skb_transport_header(skb) + offset); +- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); ++ *spi = net_hdr_word(skb_transport_header(skb) + offset); ++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); + return 0; + } + EXPORT_SYMBOL(xfrm_parse_spi); +--- a/net/ipv4/tcp_input.c ++++ b/net/ipv4/tcp_input.c +@@ -3898,14 +3898,16 @@ static bool tcp_parse_aligned_timestamp( + { + const __be32 *ptr = (const __be32 *)(th + 1); + +- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) +- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { ++ if (net_hdr_word(ptr) == ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { + tp->rx_opt.saw_tstamp = 1; + ++ptr; +- tp->rx_opt.rcv_tsval = ntohl(*ptr); ++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); + ++ptr; +- if (*ptr) +- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; ++ if (net_hdr_word(ptr)) ++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - ++ tp->tsoffset; + else + tp->rx_opt.rcv_tsecr = 0; + return true; +--- a/include/uapi/linux/if_pppox.h ++++ b/include/uapi/linux/if_pppox.h +@@ -51,6 +51,7 @@ struct pppoe_addr { + */ + struct pptp_addr { + __u16 call_id; ++ __u16 pad; + struct in_addr sin_addr; + }; + +--- a/net/ipv6/netfilter/nf_log_ipv6.c ++++ b/net/ipv6/netfilter/nf_log_ipv6.c +@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l + /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ + nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", + ntohs(ih->payload_len) + sizeof(struct ipv6hdr), +- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, ++ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, + ih->hop_limit, +- (ntohl(*(__be32 *)ih) & 0x000fffff)); ++ (ntohl(net_hdr_word(ih)) & 0x000fffff)); + + fragment = 0; + ptr = ip6hoff + sizeof(struct ipv6hdr); +--- a/include/net/neighbour.h ++++ b/include/net/neighbour.h +@@ -266,8 +266,10 @@ static inline bool neigh_key_eq128(const + const u32 *n32 = (const u32 *)n->primary_key; + const u32 *p32 = pkey; + +- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | +- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0; ++ return ((n32[0] ^ net_hdr_word(&p32[0])) | ++ (n32[1] ^ net_hdr_word(&p32[1])) | ++ (n32[2] ^ net_hdr_word(&p32[2])) | ++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0; + } + + static inline struct neighbour *___neigh_lookup_noref( +--- a/include/uapi/linux/netfilter_arp/arp_tables.h ++++ b/include/uapi/linux/netfilter_arp/arp_tables.h +@@ -70,7 +70,7 @@ struct arpt_arp { + __u8 flags; + /* Inverse flags */ + __u16 invflags; +-}; ++} __attribute__((aligned(4))); + + /* Values for "flag" field in struct arpt_ip (general arp structure). + * No flags defined yet. +--- a/net/core/utils.c ++++ b/net/core/utils.c +@@ -447,8 +447,14 @@ void inet_proto_csum_replace16(__sum16 * + bool pseudohdr) + { + __be32 diff[] = { +- ~from[0], ~from[1], ~from[2], ~from[3], +- to[0], to[1], to[2], to[3], ++ ~net_hdr_word(&from[0]), ++ ~net_hdr_word(&from[1]), ++ ~net_hdr_word(&from[2]), ++ ~net_hdr_word(&from[3]), ++ net_hdr_word(&to[0]), ++ net_hdr_word(&to[1]), ++ net_hdr_word(&to[2]), ++ net_hdr_word(&to[3]), + }; + if (skb->ip_summed != CHECKSUM_PARTIAL) { + *sum = csum_fold(csum_partial(diff, sizeof(diff), +--- a/include/linux/etherdevice.h ++++ b/include/linux/etherdevice.h +@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons + * @b: Pointer to Ethernet header + * + * Compare two Ethernet headers, returns 0 if equal. +- * This assumes that the network header (i.e., IP header) is 4-byte ++ * This assumes that the network header (i.e., IP header) is 2-byte + * aligned OR the platform can handle unaligned access. This is the + * case for all packets coming into netif_receive_skb or similar + * entry points. +@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe + fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6); + return fold; + #else +- u32 *a32 = (u32 *)((u8 *)a + 2); +- u32 *b32 = (u32 *)((u8 *)b + 2); ++ const u16 *a16 = a; ++ const u16 *b16 = b; + +- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) | +- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]); ++ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) | ++ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) | ++ (a16[6] ^ b16[6]); + #endif + } + +--- a/net/ipv4/tcp_offload.c ++++ b/net/ipv4/tcp_offload.c +@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct + + th2 = tcp_hdr(p); + +- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) { ++ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) { + NAPI_GRO_CB(p)->same_flow = 0; + continue; + } +@@ -244,8 +244,8 @@ found: + ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH)); + flush |= (__force int)(th->ack_seq ^ th2->ack_seq); + for (i = sizeof(*th); i < thlen; i += 4) +- flush |= *(u32 *)((u8 *)th + i) ^ +- *(u32 *)((u8 *)th2 + i); ++ flush |= net_hdr_word((u8 *)th + i) ^ ++ net_hdr_word((u8 *)th2 + i); + + /* When we receive our second frame we can made a decision on if we + * continue this flow as an atomic flow with a fixed ID or if we use +--- a/net/ipv6/netfilter/ip6table_mangle.c ++++ b/net/ipv6/netfilter/ip6table_mangle.c +@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con + hop_limit = ipv6_hdr(skb)->hop_limit; + + /* flowlabel and prio (includes version, which shouldn't change either */ +- flowlabel = *((u_int32_t *)ipv6_hdr(skb)); ++ flowlabel = net_hdr_word(ipv6_hdr(skb)); + + ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle); + +@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con + !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) || + skb->mark != mark || + ipv6_hdr(skb)->hop_limit != hop_limit || +- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) { ++ flowlabel != net_hdr_word(ipv6_hdr(skb)))) { + err = ip6_route_me_harder(state->net, skb); + if (err < 0) + ret = NF_DROP_ERR(err); |