diff options
11 files changed, 136 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 68aa0ee863..c1f594989c 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -39,6 +39,9 @@ get_status_led() { dir-300-b1 | dir-600-b1 | dir-600-b2) status_led="d-link:green:status" ;; + dap-1350) + status_led="d-link:blue:power" + ;; esr-9753) status_led="esr-9753:orange:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 841aac4f3e..d29335799f 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -38,6 +38,10 @@ case "$FIRMWARE" in rt2x00_eeprom_extract "devdata" 16384 272 ;; + dap-1350) + rt2x00_eeprom_extract "devdata" 0 272 + ;; + rt-n10-plus | \ rt-g32-b1) rt2x00_eeprom_extract "devconf" 0 272 diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 126c475a4b..f701b7e075 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -29,6 +29,10 @@ preinit_set_mac_address() { mac=$(ramips_get_mac_binary devdata 16388) ifconfig eth0 hw ether $mac 2>/dev/null ;; + dap-1350) + mac=$(ramips_get_mac_binary devdata 46) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; all0256n |\ all5002 | \ fonera20n |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 2667267ac1..0089e0ddcc 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -80,6 +80,9 @@ ramips_board_name() { *"DIR-600 B2") name="dir-600-b2" ;; + *"DAP-1350") + name="dap-1350" + ;; *"ESR-9753") name="esr-9753" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 2791c8d742..eb9a0d1206 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -21,6 +21,7 @@ platform_check_image() { dir-300-b1 | \ dir-600-b1 | \ dir-600-b2 | \ + dap-1350 | \ esr-9753 | \ fonera20n | \ freestation5 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 7741eac766..50f86889b7 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -36,6 +36,7 @@ enum ramips_mach_type { /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ RAMIPS_MACH_BC2, /* NexAira BC2 */ + RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */ RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 34fb51af61..48745ae5d6 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -71,6 +71,11 @@ config RT305X_MACH_DIR_300_REVB select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_DAP_1350 + bool "D-Link DAP-1350 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_ESR_9753 bool "EnGenius ESR-9753 support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 7a6fcc0cb4..e5035e2e66 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c new file mode 100644 index 0000000000..cd5d6ae53e --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c @@ -0,0 +1,94 @@ +/* + * D-Link DAP-1350 board support + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DAP_1350_GPIO_LED_POWER_BLUE 8 +#define DAP_1350_GPIO_LED_POWER_RED 9 +#define DAP_1350_GPIO_LED_WPS 14 + +#define DAP_1350_GPIO_BUTTON_WPS 0 /* active low */ +#define DAP_1350_GPIO_BUTTON_RESET 10 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_AP 7 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_RT 11 /* active low */ + +#define DAP_1350_KEYS_POLL_INTERVAL 20 +#define DAP_1350_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1350_KEYS_POLL_INTERVAL) + +static struct gpio_led dap_1350_leds_gpio[] __initdata = { + { + .name = "d-link:blue:power", + .gpio = DAP_1350_GPIO_LED_POWER_BLUE, + .active_low = 1, + }, { + .name = "d-link:red:power", + .gpio = DAP_1350_GPIO_LED_POWER_RED, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DAP_1350_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "rt", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_RT, + .active_low = 1, + }, { + .desc = "ap", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_AP, + .active_low = 1, + } +}; + +static void __init dap_1350_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio), + dap_1350_leds_gpio); + ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dap_1350_gpio_buttons), + dap_1350_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350", + dap_1350_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 6aa03a3c7a..5675201bce 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -182,6 +182,20 @@ define BuildFirmware/DIR300B1/initramfs $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) endef +mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware) +mtd_dap1350_kernel_part_size=1114112 +mtd_dap1350_rootfs_part_size=6553600 +define BuildFirmware/DAP1350 + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size)) + mkdapimg -s $(4) \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.bin +endef + +define BuildFirmware/DAP1350/initramfs + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size)) +endef + define BuildFirmware/Edimax if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkedimaximg -i $(call sysupname,$(1),$(2)) \ @@ -353,6 +367,10 @@ define Image/Build/Profile/DIR300B1 $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d) endef +define Image/Build/Profile/DAP1350 + $(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3) +endef + define Image/Build/Profile/ESR9753 $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys) endef @@ -472,6 +490,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) + $(call Image/Build/Profile/DAP1350,$(1)) $(call Image/Build/Profile/ESR9753,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) $(call Image/Build/Profile/RTN10PLUS,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3 index 79820a8fcb..04afff646b 100644 --- a/target/linux/ramips/rt305x/config-3.3 +++ b/target/linux/ramips/rt305x/config-3.3 @@ -93,6 +93,7 @@ CONFIG_RT305X_MACH_ALL5002=y CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_BC2=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_DAP_1350=y CONFIG_RT305X_MACH_ESR_9753=y CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y |