diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/ki_rb.dts | 206 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 12 |
6 files changed, 228 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b424c759db..73f52339c5 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -555,6 +555,11 @@ zorlik,zl5900v2) zte-q7) set_wifi_led "$boardname:blue:status" ;; +zyxel,keenetic-extra-ii) + set_wifi_led "$boardname:green:wifi" + set_usb_led "$boardname:green:usb" + ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" + ;; youku-yk1) set_wifi_led "$boardname:blue:air" set_usb_led "$boardname:blue:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 1303bcf8ca..01355b4278 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -218,7 +218,8 @@ ramips_setup_interfaces() wrtnode2p | \ wrtnode2r | \ youhua,wr1200js|\ - zbt-wa05) + zbt-wa05|\ + zyxel,keenetic-extra-ii) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index ed6c409e0f..d4fe14116a 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -54,7 +54,8 @@ get_status_led() { x5|\ x8|\ xdxrn502j|\ - wn3000rpv3) + wn3000rpv3|\ + zyxel,keenetic-extra-ii) status_led="$boardname:green:power" ;; 3g-6200nl) diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 3511f828ce..a2c6395cfb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -226,6 +226,7 @@ platform_check_image() { zbt-wr8305rt|\ zorlik,zl5900v2|\ zte-q7|\ + zyxel,keenetic-extra-ii|\ youku-yk1) [ "$magic" != "27051956" ] && { echo "Invalid image type." diff --git a/target/linux/ramips/dts/ki_rb.dts b/target/linux/ramips/dts/ki_rb.dts new file mode 100644 index 0000000000..8b27063a46 --- /dev/null +++ b/target/linux/ramips/dts/ki_rb.dts @@ -0,0 +1,206 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc"; + model = "ZyXEL Keenetic Extra II"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600n8"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + fn { + label = "fn"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "keenetic-extra-ii:green:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + internet { + label = "keenetic-extra-ii:green:internet"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "keenetic-extra-ii:green:wifi"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "keenetic-extra-ii:green:usb"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "rf-eeprom"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xe90000>; + }; + + partition@ee0000 { + label = "config_1"; + reg = <0xee0000 0x10000>; + read-only; + }; + + partition@ef0000 { + label = "storage"; + reg = <0xef0000 0x100000>; + read-only; + }; + + partition@ff0000 { + label = "dump"; + reg = <0xff0000 0x10000>; + read-only; + }; + + partition@1000000 { + label = "u-state"; + reg = <0x1000000 0x30000>; + read-only; + }; + + partition@1030000 { + label = "u-config_res"; + reg = <0x1030000 0x10000>; + read-only; + }; + + partition@1040000 { + label = "rf-eeprom_res"; + reg = <0x1040000 0x10000>; + read-only; + }; + + partition@1050000 { + label = "firmware_2"; + reg = <0x1050000 0xe90000>; + read-only; + }; + + partition@1ee0000 { + label = "config_2"; + reg = <0x1ee0000 0x10000>; + read-only; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + status = "okay"; + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&pcie { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&factory 0x8004>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 443e1c79ab..6c75002a84 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -313,3 +313,15 @@ define Device/zbtlink_zbt-we1226 DEVICE_TITLE := ZBTlink ZBT-WE1226 endef TARGET_DEVICES += zbtlink_zbt-we1226 + +define Device/zyxel_keenetic-extra-ii + DTS := ki_rb + IMAGE_SIZE := 14912k + BLOCKSIZE := 64k + DEVICE_TITLE := ZyXEL Keenetic Extra II + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport + IMAGES += factory.bin + IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to $$$$(BLOCKSIZE) | \ + check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II" +endef +TARGET_DEVICES += zyxel_keenetic-extra-ii |