diff options
4 files changed, 5 insertions, 1083 deletions
diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 8cb20075a3..bdb2c450a6 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -1,9 +1,8 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2020.04 -PKG_RELEASE:=2 -PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372 +PKG_VERSION:=2020.07 +PKG_HASH:=c1f5bf9ee6bb6e648edbf19ce2ca9452f614b08a9f886f1a566aa42e8cf05f6a include $(INCLUDE_DIR)/u-boot.mk include $(INCLUDE_DIR)/package.mk diff --git a/package/boot/uboot-mediatek/patches/001-eth-mtk-add-mt7531-switch.patch b/package/boot/uboot-mediatek/patches/001-eth-mtk-add-mt7531-switch.patch deleted file mode 100644 index ced1ca9a15..0000000000 --- a/package/boot/uboot-mediatek/patches/001-eth-mtk-add-mt7531-switch.patch +++ /dev/null @@ -1,1074 +0,0 @@ -From patchwork Tue Feb 18 08:49:37 2020 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com> -X-Patchwork-Id: 1239956 -X-Patchwork-Delegate: trini@ti.com -Return-Path: <u-boot-bounces@lists.denx.de> -X-Original-To: incoming@patchwork.ozlabs.org -Delivered-To: patchwork-incoming@bilbo.ozlabs.org -Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) - smtp.mailfrom=lists.denx.de - (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; - helo=phobos.denx.de; - envelope-from=u-boot-bounces@lists.denx.de; - receiver=<UNKNOWN>) -Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) - header.from=mediatek.com -Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; - unprotected) header.d=mediatek.com header.i=@mediatek.com - header.a=rsa-sha256 header.s=dk header.b=NQKfnebM; - dkim-atps=neutral -Received: from phobos.denx.de (phobos.denx.de - [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) - (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) - key-exchange X25519 server-signature RSA-PSS (4096 bits)) - (No client certificate requested) - by ozlabs.org (Postfix) with ESMTPS id 48MJX54ymTz9sRf - for <incoming@patchwork.ozlabs.org>; - Tue, 18 Feb 2020 22:28:53 +1100 (AEDT) -Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) - by phobos.denx.de (Postfix) with ESMTP id A68D8810D8; - Tue, 18 Feb 2020 12:28:47 +0100 (CET) -Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) - header.from=mediatek.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de -Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; - unprotected) header.d=mediatek.com header.i=@mediatek.com - header.b="NQKfnebM"; dkim-atps=neutral -Received: by phobos.denx.de (Postfix, from userid 109) - id 767F881217; Tue, 18 Feb 2020 09:50:00 +0100 (CET) -X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de -X-Spam-Level: -X-Spam-Status: No, score=0.5 required=5.0 tests=BAYES_00,DKIM_SIGNED, - DKIM_VALID,DKIM_VALID_AU,MIME_BASE64_TEXT,RDNS_NONE,SPF_HELO_NONE, - UNPARSEABLE_RELAY,URIBL_BLOCKED autolearn=no autolearn_force=no - version=3.4.2 -Received: from mailgw01.mediatek.com (unknown [210.61.82.183]) - by phobos.denx.de (Postfix) with ESMTP id 40ADE811FB - for <u-boot@lists.denx.de>; Tue, 18 Feb 2020 09:49:46 +0100 (CET) -Authentication-Results: phobos.denx.de; - dmarc=pass (p=none dis=none) header.from=mediatek.com -Authentication-Results: phobos.denx.de; - spf=pass smtp.mailfrom=landen.chao@mediatek.com -X-UUID: ddaa8deb3c7d4a24ba5cbcb30775fbfd-20200218 -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=mediatek.com; s=dk; - h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; - bh=qvWp4DdC1p5SZD1XJPV3kwdXTU9lBi4hbWNZQoO2oLI=; - b=NQKfnebM0mIfPJuncOxa6aNY+g5wFOnlozbm/o8ViKaVNbkd8YSB0ISWOerj8lALM7E7sSP797r514G3R4EAQPPvuAm5B2wi2VuYKssTxHkvYJvCrALXp4wmQtGF+gJytfdWuHx6Np0wfbjTsLqw+JUtcDi/0jAa8TQ5y9UHr9Q=; -X-UUID: ddaa8deb3c7d4a24ba5cbcb30775fbfd-20200218 -Received: from mtkcas07.mediatek.inc [(172.21.101.84)] by - mailgw01.mediatek.com (envelope-from <landen.chao@mediatek.com>) - (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS) - with ESMTP id 827129897; Tue, 18 Feb 2020 16:49:43 +0800 -Received: from MTKCAS06.mediatek.inc (172.21.101.30) by - mtkmbs05n1.mediatek.inc (172.21.101.15) with Microsoft SMTP Server - (TLS) id 15.0.1395.4; Tue, 18 Feb 2020 16:48:45 +0800 -Received: from mtksdccf07.mediatek.inc (172.21.84.99) by MTKCAS06.mediatek.inc - (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via - Frontend Transport; Tue, 18 Feb 2020 16:47:41 +0800 -From: Landen Chao <landen.chao@mediatek.com> -To: Ryder Lee <ryder.lee@mediatek.com>, Weijie Gao <weijie.gao@mediatek.com>, - GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>, - Joe Hershberger <joe.hershberger@ni.com>, <u-boot@lists.denx.de> -CC: <frank-w@public-files.de>, <steven.liu@mediatek.com>, - <landen.chao@mediatek.com>, <mark-mc.lee@mediatek.com> -Subject: [U-Boot 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth - driver -Date: Tue, 18 Feb 2020 16:49:37 +0800 -Message-ID: <f10c8e2e72fda3ac9d8d240b128f28c52cf06f3f.1582015221.git.landen.chao@mediatek.com> -X-Mailer: git-send-email 2.18.0 -In-Reply-To: <cover.1582015221.git.landen.chao@mediatek.com> -References: <cover.1582015221.git.landen.chao@mediatek.com> -MIME-Version: 1.0 -X-MTK: N -X-Mailman-Approved-At: Tue, 18 Feb 2020 12:28:45 +0100 -X-BeenThere: u-boot@lists.denx.de -X-Mailman-Version: 2.1.30rc1 -Precedence: list -List-Id: U-Boot discussion <u-boot.lists.denx.de> -List-Unsubscribe: <https://lists.denx.de/options/u-boot>, - <mailto:u-boot-request@lists.denx.de?subject=unsubscribe> -List-Archive: <https://lists.denx.de/pipermail/u-boot/> -List-Post: <mailto:u-boot@lists.denx.de> -List-Help: <mailto:u-boot-request@lists.denx.de?subject=help> -List-Subscribe: <https://lists.denx.de/listinfo/u-boot>, - <mailto:u-boot-request@lists.denx.de?subject=subscribe> -Errors-To: u-boot-bounces@lists.denx.de -Sender: "U-Boot" <u-boot-bounces@lists.denx.de> -X-Virus-Scanned: clamav-milter 0.102.1 at phobos.denx.de -X-Virus-Status: Clean - -mt7531 is a 7-ports switch with 5 embedded giga phys, and uses the same -MAC design of mt7530. The cpu port6 supports SGMII only. The cpu port5 -supports RGMII or SGMII in different model. - -mt7531 is connected to mt7622 via both RGMII and SGMII interfaces. -In this patch, mt7531 cpu port5 or port6 is configured to maximum -capability to align CPU MAC setting. - -The dts has been committed in the commit 6efa450565cdc ("arm: dts: -mediatek: add ethernet and sgmii dts node for mt7622") - -Signed-off-by: Landen Chao <landen.chao@mediatek.com> -Tested-by: Frank Wunderlich <frank-w@public-files.de> ---- - drivers/net/mtk_eth.c | 580 +++++++++++++++++++++++++++++++++--------- - drivers/net/mtk_eth.h | 124 ++++++++- - 2 files changed, 577 insertions(+), 127 deletions(-) - -diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c -index edfa5d1ce8..f7d34a2e6b 100644 ---- a/drivers/net/mtk_eth.c -+++ b/drivers/net/mtk_eth.c -@@ -30,10 +30,12 @@ - #define RX_TOTAL_BUF_SIZE (NUM_RX_DESC * PKTSIZE_ALIGN) - #define TOTAL_PKT_BUF_SIZE (TX_TOTAL_BUF_SIZE + RX_TOTAL_BUF_SIZE) - --#define MT7530_NUM_PHYS 5 --#define MT7530_DFL_SMI_ADDR 31 -+#define MT753X_NUM_PHYS 5 -+#define MT753X_NUM_PORTS 7 -+#define MT753X_DFL_SMI_ADDR 31 -+#define MT753X_SMI_ADDR_MASK 0x1f - --#define MT7530_PHY_ADDR(base, addr) \ -+#define MT753X_PHY_ADDR(base, addr) \ - (((base) + (addr)) & 0x1f) - - #define GDMA_FWD_TO_CPU \ -@@ -131,7 +133,8 @@ struct pdma_txdesc { - - enum mtk_switch { - SW_NONE, -- SW_MT7530 -+ SW_MT7530, -+ SW_MT7531 - }; - - enum mtk_soc { -@@ -173,8 +176,8 @@ struct mtk_eth_priv { - - enum mtk_switch sw; - int (*switch_init)(struct mtk_eth_priv *priv); -- u32 mt7530_smi_addr; -- u32 mt7530_phy_base; -+ u32 mt753x_smi_addr; -+ u32 mt753x_phy_base; - - struct gpio_desc rst_gpio; - int mcm; -@@ -349,6 +352,174 @@ static int mtk_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad, - return priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, val); - } - -+/* -+ * MT7530 Internal Register Address Bits -+ * ------------------------------------------------------------------- -+ * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 | -+ * |----------------------------------------|---------------|--------| -+ * | Page Address | Reg Address | Unused | -+ * ------------------------------------------------------------------- -+ */ -+ -+static int mt753x_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data) -+{ -+ int ret, low_word, high_word; -+ -+ /* Write page address */ -+ ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6); -+ if (ret) -+ return ret; -+ -+ /* Read low word */ -+ low_word = mtk_mii_read(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf); -+ if (low_word < 0) -+ return low_word; -+ -+ /* Read high word */ -+ high_word = mtk_mii_read(priv, priv->mt753x_smi_addr, 0x10); -+ if (high_word < 0) -+ return high_word; -+ -+ if (data) -+ *data = ((u32)high_word << 16) | (low_word & 0xffff); -+ -+ return 0; -+} -+ -+static int mt753x_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data) -+{ -+ int ret; -+ -+ /* Write page address */ -+ ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6); -+ if (ret) -+ return ret; -+ -+ /* Write low word */ -+ ret = mtk_mii_write(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf, -+ data & 0xffff); -+ if (ret) -+ return ret; -+ -+ /* Write high word */ -+ return mtk_mii_write(priv, priv->mt753x_smi_addr, 0x10, data >> 16); -+} -+ -+static void mt753x_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, -+ u32 set) -+{ -+ u32 val; -+ -+ mt753x_reg_read(priv, reg, &val); -+ val &= ~clr; -+ val |= set; -+ mt753x_reg_write(priv, reg, val); -+} -+ -+/* Indirect MDIO clause 22/45 access */ -+static int mt7531_mii_rw(struct mtk_eth_priv *priv, int phy, int reg, u16 data, -+ u32 cmd, u32 st) -+{ -+ ulong timeout; -+ u32 val, timeout_ms; -+ int ret = 0; -+ -+ val = (st << MDIO_ST_S) | -+ ((cmd << MDIO_CMD_S) & MDIO_CMD_M) | -+ ((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) | -+ ((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M); -+ -+ if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR) -+ val |= data & MDIO_RW_DATA_M; -+ -+ mt753x_reg_write(priv, MT7531_PHY_IAC, val | PHY_ACS_ST); -+ -+ timeout_ms = 100; -+ timeout = get_timer(0); -+ while (1) { -+ mt753x_reg_read(priv, MT7531_PHY_IAC, &val); -+ -+ if ((val & PHY_ACS_ST) == 0) -+ break; -+ -+ if (get_timer(timeout) > timeout_ms) -+ return -ETIMEDOUT; -+ } -+ -+ if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) { -+ mt753x_reg_read(priv, MT7531_PHY_IAC, &val); -+ ret = val & MDIO_RW_DATA_M; -+ } -+ -+ return ret; -+} -+ -+static int mt7531_mii_ind_read(struct mtk_eth_priv *priv, u8 phy, u8 reg) -+{ -+ u8 phy_addr; -+ -+ if (phy >= MT753X_NUM_PHYS) -+ return -EINVAL; -+ -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy); -+ -+ return mt7531_mii_rw(priv, phy_addr, reg, 0, MDIO_CMD_READ, -+ MDIO_ST_C22); -+} -+ -+static int mt7531_mii_ind_write(struct mtk_eth_priv *priv, u8 phy, u8 reg, -+ u16 val) -+{ -+ u8 phy_addr; -+ -+ if (phy >= MT753X_NUM_PHYS) -+ return -EINVAL; -+ -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy); -+ -+ return mt7531_mii_rw(priv, phy_addr, reg, val, MDIO_CMD_WRITE, -+ MDIO_ST_C22); -+} -+ -+int mt7531_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg) -+{ -+ u8 phy_addr; -+ int ret; -+ -+ if (addr >= MT753X_NUM_PHYS) -+ return -EINVAL; -+ -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr); -+ -+ ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR, -+ MDIO_ST_C45); -+ if (ret) -+ return ret; -+ -+ return mt7531_mii_rw(priv, phy_addr, devad, 0, MDIO_CMD_READ_C45, -+ MDIO_ST_C45); -+} -+ -+static int mt7531_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad, -+ u16 reg, u16 val) -+{ -+ u8 phy_addr; -+ int ret; -+ -+ if (addr >= MT753X_NUM_PHYS) -+ return 0; -+ -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr); -+ -+ ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR, -+ MDIO_ST_C45); -+ if (ret) -+ return ret; -+ -+ return mt7531_mii_rw(priv, phy_addr, devad, val, MDIO_CMD_WRITE, -+ MDIO_ST_C45); -+} -+ - static int mtk_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) - { - struct mtk_eth_priv *priv = bus->priv; -@@ -387,6 +558,12 @@ static int mtk_mdio_register(struct udevice *dev) - priv->mmd_read = mtk_mmd_ind_read; - priv->mmd_write = mtk_mmd_ind_write; - break; -+ case SW_MT7531: -+ priv->mii_read = mt7531_mii_ind_read; -+ priv->mii_write = mt7531_mii_ind_write; -+ priv->mmd_read = mt7531_mmd_ind_read; -+ priv->mmd_write = mt7531_mmd_ind_write; -+ break; - default: - priv->mii_read = mtk_mii_read; - priv->mii_write = mtk_mii_write; -@@ -410,75 +587,18 @@ static int mtk_mdio_register(struct udevice *dev) - return 0; - } - --/* -- * MT7530 Internal Register Address Bits -- * ------------------------------------------------------------------- -- * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 | -- * |----------------------------------------|---------------|--------| -- * | Page Address | Reg Address | Unused | -- * ------------------------------------------------------------------- -- */ -- --static int mt7530_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data) -+static int mt753x_core_reg_read(struct mtk_eth_priv *priv, u32 reg) - { -- int ret, low_word, high_word; -+ u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0); - -- /* Write page address */ -- ret = mtk_mii_write(priv, priv->mt7530_smi_addr, 0x1f, reg >> 6); -- if (ret) -- return ret; -- -- /* Read low word */ -- low_word = mtk_mii_read(priv, priv->mt7530_smi_addr, (reg >> 2) & 0xf); -- if (low_word < 0) -- return low_word; -- -- /* Read high word */ -- high_word = mtk_mii_read(priv, priv->mt7530_smi_addr, 0x10); -- if (high_word < 0) -- return high_word; -- -- if (data) -- *data = ((u32)high_word << 16) | (low_word & 0xffff); -- -- return 0; -+ return priv->mmd_read(priv, phy_addr, 0x1f, reg); - } - --static int mt7530_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data) -+static void mt753x_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val) - { -- int ret; -- -- /* Write page address */ -- ret = mtk_mii_write(priv, priv->mt7530_smi_addr, 0x1f, reg >> 6); -- if (ret) -- return ret; -+ u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0); - -- /* Write low word */ -- ret = mtk_mii_write(priv, priv->mt7530_smi_addr, (reg >> 2) & 0xf, -- data & 0xffff); -- if (ret) -- return ret; -- -- /* Write high word */ -- return mtk_mii_write(priv, priv->mt7530_smi_addr, 0x10, data >> 16); --} -- --static void mt7530_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, -- u32 set) --{ -- u32 val; -- -- mt7530_reg_read(priv, reg, &val); -- val &= ~clr; -- val |= set; -- mt7530_reg_write(priv, reg, val); --} -- --static void mt7530_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val) --{ -- u8 phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, 0); -- -- mtk_mmd_ind_write(priv, phy_addr, 0x1f, reg, val); -+ priv->mmd_write(priv, phy_addr, 0x1f, reg, val); - } - - static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode) -@@ -496,46 +616,46 @@ static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode) - } - - /* Disable MT7530 core clock */ -- mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0); -+ mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0); - - /* Disable MT7530 PLL */ -- mt7530_core_reg_write(priv, CORE_GSWPLL_GRP1, -+ mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1, - (2 << RG_GSWPLL_POSDIV_200M_S) | - (32 << RG_GSWPLL_FBKDIV_200M_S)); - - /* For MT7530 core clock = 500Mhz */ -- mt7530_core_reg_write(priv, CORE_GSWPLL_GRP2, -+ mt753x_core_reg_write(priv, CORE_GSWPLL_GRP2, - (1 << RG_GSWPLL_POSDIV_500M_S) | - (25 << RG_GSWPLL_FBKDIV_500M_S)); - - /* Enable MT7530 PLL */ -- mt7530_core_reg_write(priv, CORE_GSWPLL_GRP1, -+ mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1, - (2 << RG_GSWPLL_POSDIV_200M_S) | - (32 << RG_GSWPLL_FBKDIV_200M_S) | - RG_GSWPLL_EN_PRE); - - udelay(20); - -- mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); -+ mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - - /* Setup the MT7530 TRGMII Tx Clock */ -- mt7530_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1); -- mt7530_core_reg_write(priv, CORE_PLL_GROUP6, 0); -- mt7530_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta); -- mt7530_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta); -- mt7530_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1); -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP6, 0); -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta); -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta); -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | - RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); - -- mt7530_core_reg_write(priv, CORE_PLL_GROUP2, -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - (1 << RG_SYSPLL_POSDIV_S)); - -- mt7530_core_reg_write(priv, CORE_PLL_GROUP7, -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP7, - RG_LCDDS_PCW_NCPO_CHG | (3 << RG_LCCDS_C_S) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); - - /* Enable MT7530 core clock */ -- mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, -+ mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, - REG_GSWCK_EN | REG_TRGMIICK_EN); - - return 0; -@@ -551,46 +671,33 @@ static int mt7530_setup(struct mtk_eth_priv *priv) - mtk_ethsys_rmw(priv, ETHSYS_CLKCFG0_REG, - ETHSYS_TRGMII_CLK_SEL362_5, 0); - -- /* Global reset switch */ -- if (priv->mcm) { -- reset_assert(&priv->rst_mcm); -- udelay(1000); -- reset_deassert(&priv->rst_mcm); -- mdelay(1000); -- } else if (dm_gpio_is_valid(&priv->rst_gpio)) { -- dm_gpio_set_value(&priv->rst_gpio, 0); -- udelay(1000); -- dm_gpio_set_value(&priv->rst_gpio, 1); -- mdelay(1000); -- } -- - /* Modify HWTRAP first to allow direct access to internal PHYs */ -- mt7530_reg_read(priv, HWTRAP_REG, &val); -+ mt753x_reg_read(priv, HWTRAP_REG, &val); - val |= CHG_TRAP; - val &= ~C_MDIO_BPS; -- mt7530_reg_write(priv, MHWTRAP_REG, val); -+ mt753x_reg_write(priv, MHWTRAP_REG, val); - - /* Calculate the phy base address */ - val = ((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3; -- priv->mt7530_phy_base = (val | 0x7) + 1; -+ priv->mt753x_phy_base = (val | 0x7) + 1; - - /* Turn off PHYs */ -- for (i = 0; i < MT7530_NUM_PHYS; i++) { -- phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, i); -+ for (i = 0; i < MT753X_NUM_PHYS; i++) { -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); - phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); - phy_val |= BMCR_PDOWN; - priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); - } - - /* Force MAC link down before reset */ -- mt7530_reg_write(priv, PCMR_REG(5), FORCE_MODE); -- mt7530_reg_write(priv, PCMR_REG(6), FORCE_MODE); -+ mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE); -+ mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE); - - /* MT7530 reset */ -- mt7530_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); -+ mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); - udelay(100); - -- val = (1 << IPG_CFG_S) | -+ val = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - MAC_MODE | FORCE_MODE | - MAC_TX_EN | MAC_RX_EN | - BKOFF_EN | BACKPR_EN | -@@ -598,53 +705,280 @@ static int mt7530_setup(struct mtk_eth_priv *priv) - FORCE_DPX | FORCE_LINK; - - /* MT7530 Port6: Forced 1000M/FD, FC disabled */ -- mt7530_reg_write(priv, PCMR_REG(6), val); -+ mt753x_reg_write(priv, PMCR_REG(6), val); - - /* MT7530 Port5: Forced link down */ -- mt7530_reg_write(priv, PCMR_REG(5), FORCE_MODE); -+ mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE); - - /* MT7530 Port6: Set to RGMII */ -- mt7530_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII); -+ mt753x_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII); - - /* Hardware Trap: Enable Port6, Disable Port5 */ -- mt7530_reg_read(priv, HWTRAP_REG, &val); -+ mt753x_reg_read(priv, HWTRAP_REG, &val); - val |= CHG_TRAP | LOOPDET_DIS | P5_INTF_DIS | - (P5_INTF_SEL_GMAC5 << P5_INTF_SEL_S) | - (P5_INTF_MODE_RGMII << P5_INTF_MODE_S); - val &= ~(C_MDIO_BPS | P6_INTF_DIS); -- mt7530_reg_write(priv, MHWTRAP_REG, val); -+ mt753x_reg_write(priv, MHWTRAP_REG, val); - - /* Setup switch core pll */ - mt7530_pad_clk_setup(priv, priv->phy_interface); - - /* Lower Tx Driving for TRGMII path */ - for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) -- mt7530_reg_write(priv, MT7530_TRGMII_TD_ODT(i), -+ mt753x_reg_write(priv, MT7530_TRGMII_TD_ODT(i), - (8 << TD_DM_DRVP_S) | (8 << TD_DM_DRVN_S)); - - for (i = 0 ; i < NUM_TRGMII_CTRL; i++) -- mt7530_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16); -+ mt753x_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16); -+ -+ /* Turn on PHYs */ -+ for (i = 0; i < MT753X_NUM_PHYS; i++) { -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); -+ phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); -+ phy_val &= ~BMCR_PDOWN; -+ priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); -+ } -+ -+ return 0; -+} -+ -+static void mt7531_core_pll_setup(struct mtk_eth_priv *priv, int mcm) -+{ -+ /* Step 1 : Disable MT7531 COREPLL */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, 0); -+ -+ /* Step 2: switch to XTAL output */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_CLKSW, SW_CLKSW); -+ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, 0); -+ -+ /* Step 3: disable PLLGP and enable program PLLGP */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_PLLGP, SW_PLLGP); -+ -+ /* Step 4: program COREPLL output frequency to 500MHz */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_POSDIV_M, -+ 2 << RG_COREPLL_POSDIV_S); -+ udelay(25); -+ -+ /* Currently, support XTAL 25Mhz only */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_M, -+ 0x140000 << RG_COREPLL_SDM_PCW_S); -+ -+ /* Set feedback divide ratio update signal to high */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, -+ RG_COREPLL_SDM_PCW_CHG); -+ -+ /* Wait for at least 16 XTAL clocks */ -+ udelay(10); -+ -+ /* Step 5: set feedback divide ratio update signal to low */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, 0); -+ -+ /* add enable 325M clock for SGMII */ -+ mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); -+ -+ /* add enable 250SSC clock for RGMII */ -+ mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); -+ -+ /*Step 6: Enable MT7531 PLL */ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, RG_COREPLL_EN); -+ -+ mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, EN_COREPLL); -+ -+ udelay(25); -+} -+ -+static int mt7531_port_sgmii_init(struct mtk_eth_priv *priv, -+ u32 port) -+{ -+ if (port != 5 && port != 6) { -+ printf("mt7531: port %d is not a SGMII port\n", port); -+ return -EINVAL; -+ } -+ -+ /* Set SGMII GEN2 speed(2.5G) */ -+ mt753x_reg_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), -+ SGMSYS_SPEED_2500, SGMSYS_SPEED_2500); -+ -+ /* Disable SGMII AN */ -+ mt753x_reg_rmw(priv, MT7531_PCS_CONTROL_1(port), -+ SGMII_AN_ENABLE, 0); -+ -+ /* SGMII force mode setting */ -+ mt753x_reg_write(priv, MT7531_SGMII_MODE(port), SGMII_FORCE_MODE); -+ -+ /* Release PHYA power down state */ -+ mt753x_reg_rmw(priv, MT7531_QPHY_PWR_STATE_CTRL(port), -+ SGMII_PHYA_PWD, 0); -+ -+ return 0; -+} -+ -+static int mt7531_port_rgmii_init(struct mtk_eth_priv *priv, u32 port) -+{ -+ u32 val; -+ -+ if (port != 5) { -+ printf("error: RGMII mode is not available for port %d\n", -+ port); -+ return -EINVAL; -+ } -+ -+ mt753x_reg_read(priv, MT7531_CLKGEN_CTRL, &val); -+ val |= GP_CLK_EN; -+ val &= ~GP_MODE_M; -+ val |= GP_MODE_RGMII << GP_MODE_S; -+ val |= TXCLK_NO_REVERSE; -+ val |= RXCLK_NO_DELAY; -+ val &= ~CLK_SKEW_IN_M; -+ val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S; -+ val &= ~CLK_SKEW_OUT_M; -+ val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S; -+ mt753x_reg_write(priv, MT7531_CLKGEN_CTRL, val); -+ -+ return 0; -+} -+ -+static void mt7531_phy_setting(struct mtk_eth_priv *priv) -+{ -+ int i; -+ u32 val; -+ -+ for (i = 0; i < MT753X_NUM_PHYS; i++) { -+ /* Enable HW auto downshift */ -+ priv->mii_write(priv, i, 0x1f, 0x1); -+ val = priv->mii_read(priv, i, PHY_EXT_REG_14); -+ val |= PHY_EN_DOWN_SHFIT; -+ priv->mii_write(priv, i, PHY_EXT_REG_14, val); -+ -+ /* PHY link down power saving enable */ -+ val = priv->mii_read(priv, i, PHY_EXT_REG_17); -+ val |= PHY_LINKDOWN_POWER_SAVING_EN; -+ priv->mii_write(priv, i, PHY_EXT_REG_17, val); -+ -+ val = priv->mmd_read(priv, i, 0x1e, PHY_DEV1E_REG_0C6); -+ val &= ~PHY_POWER_SAVING_M; -+ val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S; -+ priv->mmd_write(priv, i, 0x1e, PHY_DEV1E_REG_0C6, val); -+ } -+} -+ -+static int mt7531_setup(struct mtk_eth_priv *priv) -+{ -+ u16 phy_addr, phy_val; -+ u32 val; -+ u32 pmcr; -+ u32 port5_sgmii; -+ int i; -+ -+ priv->mt753x_phy_base = (priv->mt753x_smi_addr + 1) & -+ MT753X_SMI_ADDR_MASK; -+ -+ /* Turn off PHYs */ -+ for (i = 0; i < MT753X_NUM_PHYS; i++) { -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); -+ phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); -+ phy_val |= BMCR_PDOWN; -+ priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); -+ } -+ -+ /* Force MAC link down before reset */ -+ mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE_LNK); -+ mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE_LNK); -+ -+ /* Switch soft reset */ -+ mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); -+ udelay(100); -+ -+ /* Enable MDC input Schmitt Trigger */ -+ mt753x_reg_rmw(priv, MT7531_SMT0_IOLB, SMT_IOLB_5_SMI_MDC_EN, -+ SMT_IOLB_5_SMI_MDC_EN); -+ -+ mt7531_core_pll_setup(priv, priv->mcm); -+ -+ mt753x_reg_read(priv, MT7531_TOP_SIG_SR, &val); -+ port5_sgmii = !!(val & PAD_DUAL_SGMII_EN); -+ -+ /* port5 support either RGMII or SGMII, port6 only support SGMII. */ -+ switch (priv->phy_interface) { -+ case PHY_INTERFACE_MODE_RGMII: -+ if (!port5_sgmii) -+ mt7531_port_rgmii_init(priv, 5); -+ break; -+ case PHY_INTERFACE_MODE_SGMII: -+ mt7531_port_sgmii_init(priv, 6); -+ if (port5_sgmii) -+ mt7531_port_sgmii_init(priv, 5); -+ break; -+ default: -+ break; -+ } -+ -+ pmcr = MT7531_FORCE_MODE | -+ (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | -+ MAC_MODE | MAC_TX_EN | MAC_RX_EN | -+ BKOFF_EN | BACKPR_EN | -+ FORCE_RX_FC | FORCE_TX_FC | -+ (SPEED_1000M << FORCE_SPD_S) | FORCE_DPX | -+ FORCE_LINK; -+ -+ mt753x_reg_write(priv, PMCR_REG(5), pmcr); -+ mt753x_reg_write(priv, PMCR_REG(6), pmcr); - - /* Turn on PHYs */ -- for (i = 0; i < MT7530_NUM_PHYS; i++) { -- phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, i); -+ for (i = 0; i < MT753X_NUM_PHYS; i++) { -+ phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); - phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); - phy_val &= ~BMCR_PDOWN; - priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); - } - -+ mt7531_phy_setting(priv); -+ -+ /* Enable Internal PHYs */ -+ val = mt753x_core_reg_read(priv, CORE_PLL_GROUP4); -+ val |= MT7531_BYPASS_MODE; -+ val &= ~MT7531_POWER_ON_OFF; -+ mt753x_core_reg_write(priv, CORE_PLL_GROUP4, val); -+ -+ return 0; -+} -+ -+int mt753x_switch_init(struct mtk_eth_priv *priv) -+{ -+ int ret; -+ int i; -+ -+ /* Global reset switch */ -+ if (priv->mcm) { -+ reset_assert(&priv->rst_mcm); -+ udelay(1000); -+ reset_deassert(&priv->rst_mcm); -+ mdelay(1000); -+ } else if (dm_gpio_is_valid(&priv->rst_gpio)) { -+ dm_gpio_set_value(&priv->rst_gpio, 0); -+ udelay(1000); -+ dm_gpio_set_value(&priv->rst_gpio, 1); -+ mdelay(1000); -+ } -+ -+ ret = priv->switch_init(priv); -+ if (ret) -+ return ret; -+ - /* Set port isolation */ -- for (i = 0; i < 8; i++) { -+ for (i = 0; i < MT753X_NUM_PORTS; i++) { - /* Set port matrix mode */ - if (i != 6) -- mt7530_reg_write(priv, PCR_REG(i), -+ mt753x_reg_write(priv, PCR_REG(i), - (0x40 << PORT_MATRIX_S)); - else -- mt7530_reg_write(priv, PCR_REG(i), -+ mt753x_reg_write(priv, PCR_REG(i), - (0x3f << PORT_MATRIX_S)); - - /* Set port mode to user port */ -- mt7530_reg_write(priv, PVC_REG(i), -+ mt753x_reg_write(priv, PVC_REG(i), - (0x8100 << STAG_VPID_S) | - (VLAN_ATTR_USER << VLAN_ATTR_S)); - } -@@ -658,7 +992,7 @@ static void mtk_phy_link_adjust(struct mtk_eth_priv *priv) - u8 flowctrl; - u32 mcr; - -- mcr = (1 << IPG_CFG_S) | -+ mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - (MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) | - MAC_MODE | FORCE_MODE | - MAC_TX_EN | MAC_RX_EN | -@@ -803,7 +1137,7 @@ static void mtk_mac_init(struct mtk_eth_priv *priv) - ge_mode << SYSCFG0_GE_MODE_S(priv->gmac_id)); - - if (priv->force_mode) { -- mcr = (1 << IPG_CFG_S) | -+ mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - (MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) | - MAC_MODE | FORCE_MODE | - MAC_TX_EN | MAC_RX_EN | -@@ -1050,7 +1384,7 @@ static int mtk_eth_probe(struct udevice *dev) - return mtk_phy_probe(dev); - - /* Initialize switch */ -- return priv->switch_init(priv); -+ return mt753x_switch_init(priv); - } - - static int mtk_eth_remove(struct udevice *dev) -@@ -1159,7 +1493,11 @@ static int mtk_eth_ofdata_to_platdata(struct udevice *dev) - if (!strcmp(str, "mt7530")) { - priv->sw = SW_MT7530; - priv->switch_init = mt7530_setup; -- priv->mt7530_smi_addr = MT7530_DFL_SMI_ADDR; -+ priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR; -+ } else if (!strcmp(str, "mt7531")) { -+ priv->sw = SW_MT7531; -+ priv->switch_init = mt7531_setup; -+ priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR; - } else { - printf("error: unsupported switch\n"); - return -EINVAL; -diff --git a/drivers/net/mtk_eth.h b/drivers/net/mtk_eth.h -index 9bb037d440..f2940c9996 100644 ---- a/drivers/net/mtk_eth.h -+++ b/drivers/net/mtk_eth.h -@@ -34,7 +34,9 @@ - - /* SGMII subsystem config registers */ - #define SGMSYS_PCS_CONTROL_1 0x0 -+#define SGMII_LINK_STATUS BIT(18) - #define SGMII_AN_ENABLE BIT(12) -+#define SGMII_AN_RESTART BIT(9) - - #define SGMSYS_SGMII_MODE 0x20 - #define SGMII_FORCE_MODE 0x31120019 -@@ -139,6 +141,11 @@ - #define FORCE_DPX BIT(1) - #define FORCE_LINK BIT(0) - -+/* Values of IPG_CFG */ -+#define IPG_96BIT 0 -+#define IPG_96BIT_WITH_SHORT_IPG 1 -+#define IPG_64BIT 2 -+ - /* MAC_RX_PKT_LEN: Max RX packet length */ - #define MAC_RX_PKT_LEN_1518 0 - #define MAC_RX_PKT_LEN_1536 1 -@@ -178,17 +185,73 @@ - #define VLAN_ATTR_TRANSLATION 2 - #define VLAN_ATTR_TRANSPARENT 3 - --#define PCMR_REG(p) (0x3000 + (p) * 0x100) --/* XXX: all fields are defined under GMAC_PORT_MCR */ -- -+#define PMCR_REG(p) (0x3000 + (p) * 0x100) -+/* XXX: all fields of MT7530 are defined under GMAC_PORT_MCR -+ * MT7531 specific fields are defined below -+ */ -+#define FORCE_MODE_EEE1G BIT(25) -+#define FORCE_MODE_EEE100 BIT(26) -+#define FORCE_MODE_TX_FC BIT(27) -+#define FORCE_MODE_RX_FC BIT(28) -+#define FORCE_MODE_DPX BIT(29) -+#define FORCE_MODE_SPD BIT(30) -+#define FORCE_MODE_LNK BIT(31) -+#define MT7531_FORCE_MODE FORCE_MODE_EEE1G | FORCE_MODE_EEE100 |\ -+ FORCE_MODE_TX_FC | FORCE_MODE_RX_FC | \ -+ FORCE_MODE_DPX | FORCE_MODE_SPD | \ -+ FORCE_MODE_LNK -+ -+/* MT7531 SGMII Registers */ -+#define MT7531_SGMII_REG_BASE 0x5000 -+#define MT7531_SGMII_REG_PORT_BASE 0x1000 -+#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \ -+ (p) * MT7531_SGMII_REG_PORT_BASE + (r)) -+#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(((p) - 5), 0x00) -+#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(((p) - 5), 0x20) -+#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(((p) - 5), 0xe8) -+#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(((p) - 5), 0x128) -+/* XXX: all fields of MT7531 SGMII are defined under SGMSYS */ -+ -+/* MT753x System Control Register */ - #define SYS_CTRL_REG 0x7000 - #define SW_PHY_RST BIT(2) - #define SW_SYS_RST BIT(1) - #define SW_REG_RST BIT(0) - --#define NUM_TRGMII_CTRL 5 -+/* MT7531 */ -+#define MT7531_PHY_IAC 0x701c -+/* XXX: all fields are defined under GMAC_PIAC_REG */ -+ -+#define MT7531_CLKGEN_CTRL 0x7500 -+#define CLK_SKEW_OUT_S 8 -+#define CLK_SKEW_OUT_M 0x300 -+#define CLK_SKEW_IN_S 6 -+#define CLK_SKEW_IN_M 0xc0 -+#define RXCLK_NO_DELAY BIT(5) -+#define TXCLK_NO_REVERSE BIT(4) -+#define GP_MODE_S 1 -+#define GP_MODE_M 0x06 -+#define GP_CLK_EN BIT(0) -+ -+/* Values of GP_MODE */ -+#define GP_MODE_RGMII 0 -+#define GP_MODE_MII 1 -+#define GP_MODE_REV_MII 2 -+ -+/* Values of CLK_SKEW_IN */ -+#define CLK_SKEW_IN_NO_CHANGE 0 -+#define CLK_SKEW_IN_DELAY_100PPS 1 -+#define CLK_SKEW_IN_DELAY_200PPS 2 -+#define CLK_SKEW_IN_REVERSE 3 -+ -+/* Values of CLK_SKEW_OUT */ -+#define CLK_SKEW_OUT_NO_CHANGE 0 -+#define CLK_SKEW_OUT_DELAY_100PPS 1 -+#define CLK_SKEW_OUT_DELAY_200PPS 2 -+#define CLK_SKEW_OUT_REVERSE 3 - - #define HWTRAP_REG 0x7800 -+/* MT7530 Modified Hardware Trap Status Registers */ - #define MHWTRAP_REG 0x7804 - #define CHG_TRAP BIT(16) - #define LOOPDET_DIS BIT(14) -@@ -222,6 +285,8 @@ - #define P6_INTF_MODE_RGMII 0 - #define P6_INTF_MODE_TRGMII 1 - -+#define NUM_TRGMII_CTRL 5 -+ - #define MT7530_TRGMII_RD(n) (0x7a10 + (n) * 8) - #define RD_TAP_S 0 - #define RD_TAP_M 0x7f -@@ -229,8 +294,34 @@ - #define MT7530_TRGMII_TD_ODT(n) (0x7a54 + (n) * 8) - /* XXX: all fields are defined under GMAC_TRGMII_TD_ODT */ - --/* MT7530 GPHY MDIO Indirect Access Registers */ -+/* TOP Signals Status Register */ -+#define MT7531_TOP_SIG_SR 0x780c -+#define PAD_MCM_SMI_EN BIT(0) -+#define PAD_DUAL_SGMII_EN BIT(1) -+ -+/* MT7531 PLLGP Registers */ -+#define MT7531_PLLGP_EN 0x7820 -+#define EN_COREPLL BIT(2) -+#define SW_CLKSW BIT(1) -+#define SW_PLLGP BIT(0) -+ -+#define MT7531_PLLGP_CR0 0x78a8 -+#define RG_COREPLL_EN BIT(22) -+#define RG_COREPLL_POSDIV_S 23 -+#define RG_COREPLL_POSDIV_M 0x3800000 -+#define RG_COREPLL_SDM_PCW_S 1 -+#define RG_COREPLL_SDM_PCW_M 0x3ffffe -+#define RG_COREPLL_SDM_PCW_CHG BIT(0) -+ -+/* MT7531 RGMII and SGMII PLL clock */ -+#define MT7531_ANA_PLLGP_CR2 0x78b0 -+#define MT7531_ANA_PLLGP_CR5 0x78bc -+ -+/* MT7531 GPIO GROUP IOLB SMT0 Control */ -+#define MT7531_SMT0_IOLB 0x7f04 -+#define SMT_IOLB_5_SMI_MDC_EN BIT(5) - -+/* MT7530 GPHY MDIO Indirect Access Registers */ - #define MII_MMD_ACC_CTL_REG 0x0d - #define MMD_CMD_S 14 - #define MMD_CMD_M 0xc000 -@@ -246,7 +337,6 @@ - #define MII_MMD_ADDR_DATA_REG 0x0e - - /* MT7530 GPHY MDIO MMD Registers */ -- - #define CORE_PLL_GROUP2 0x401 - #define RG_SYSPLL_EN_NORMAL BIT(15) - #define RG_SYSPLL_VODEN BIT(14) -@@ -254,6 +344,8 @@ - #define RG_SYSPLL_POSDIV_M 0x60 - - #define CORE_PLL_GROUP4 0x403 -+#define MT7531_BYPASS_MODE BIT(4) -+#define MT7531_POWER_ON_OFF BIT(5) - #define RG_SYSPLL_DDSFBK_EN BIT(12) - #define RG_SYSPLL_BIAS_EN BIT(11) - #define RG_SYSPLL_BIAS_LPF_EN BIT(10) -@@ -298,4 +390,24 @@ - #define REG_GSWCK_EN BIT(0) - #define REG_TRGMIICK_EN BIT(1) - -+/* Extend PHY Control Register 3 */ -+#define PHY_EXT_REG_14 0x14 -+ -+/* Fields of PHY_EXT_REG_14 */ -+#define PHY_EN_DOWN_SHFIT BIT(4) -+ -+/* Extend PHY Control Register 4 */ -+#define PHY_EXT_REG_17 0x17 -+ -+/* Fields of PHY_EXT_REG_17 */ -+#define PHY_LINKDOWN_POWER_SAVING_EN BIT(4) -+ -+/* PHY RXADC Control Register 7 */ -+#define PHY_DEV1E_REG_0C6 0x0c6 -+ -+/* Fields of PHY_DEV1E_REG_0C6 */ -+#define PHY_POWER_SAVING_S 8 -+#define PHY_POWER_SAVING_M 0x300 -+#define PHY_POWER_SAVING_TX 0x0 -+ - #endif /* _MTK_ETH_H_ */ diff --git a/package/boot/uboot-mediatek/patches/005-update-bpir2-defconfig.patch b/package/boot/uboot-mediatek/patches/005-update-bpir2-defconfig.patch index a45665eff6..cc7ed89280 100644 --- a/package/boot/uboot-mediatek/patches/005-update-bpir2-defconfig.patch +++ b/package/boot/uboot-mediatek/patches/005-update-bpir2-defconfig.patch @@ -5,7 +5,6 @@ index 6b9fbd7e22..fb2a004803 100644 @@ -52,3 +52,13 @@ CONFIG_TIMER=y CONFIG_WDT_MTK=y CONFIG_LZMA=y - # CONFIG_EFI_LOADER is not set +CONFIG_CMD_BOOTZ=y +CONFIG_OF_LIBFDT_OVERLAY=y +#enables savenenv-command diff --git a/package/boot/uboot-mediatek/patches/007-env-fat-use-bootdevice.patch b/package/boot/uboot-mediatek/patches/007-env-fat-use-bootdevice.patch index a0236785d0..2ac0012286 100644 --- a/package/boot/uboot-mediatek/patches/007-env-fat-use-bootdevice.patch +++ b/package/boot/uboot-mediatek/patches/007-env-fat-use-bootdevice.patch @@ -37,11 +37,10 @@ diff --git a/env/fat.c b/env/fat.c index 35a1955e63..63aced9317 100644 --- a/env/fat.c +++ b/env/fat.c -@@ -29,6 +29,36 @@ - # endif +@@ -29,6 +29,34 @@ + # define LOADENV #endif -+#if defined(CMD_SAVEENV) || defined(CMD_LOADENV) +__weak int mmc_get_env_dev(void) +{ +#ifdef CONFIG_SYS_MMC_ENV_DEV @@ -69,11 +68,10 @@ index 35a1955e63..63aced9317 100644 + return CONFIG_ENV_FAT_DEVICE_AND_PART; +#endif +} -+#endif + - #ifdef CMD_SAVEENV static int env_fat_save(void) { + env_t __aligned(ARCH_DMA_MINALIGN) env_new; @@ -43,7 +71,7 @@ static int env_fat_save(void) return err; |