diff options
74 files changed, 16474 insertions, 0 deletions
diff --git a/target/linux/ipq806x/config-5.4 b/target/linux/ipq806x/config-5.4 new file mode 100644 index 0000000000..f4c27d7ae8 --- /dev/null +++ b/target/linux/ipq806x/config-5.4 @@ -0,0 +1,508 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +CONFIG_AR8216_PHY=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_KCOV=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_MDM9615 is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CPU_SUSPEND=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_CPUIDLE=y +# CONFIG_ARM_SMMU is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_ARM_MODULE_PLTS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BOUNCE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_QCOM=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_GPIO=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_USER is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +# CONFIG_DWMAC_DWC_QOS_ETH is not set +# CONFIG_DWMAC_GENERIC is not set +CONFIG_DWMAC_IPQ806X=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HWMON=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HW_RANDOM=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_QUP=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_IOMMU_SUPPORT=y +# CONFIG_IPQ_GCC_4019 is not set +CONFIG_IPQ_GCC_806X=y +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_KRAIT_CLOCKS=y +CONFIG_KRAIT_L2_ACCESSORS=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_GPIO=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +CONFIG_MEMFD_CREATE=y +CONFIG_MFD_QCOM_RPM=y +# CONFIG_MFD_SPMI_PMIC is not set +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MSCC_OCELOT_SWITCH is not set +CONFIG_MSM_GCC_8660=y +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_MSM_IOMMU is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_MMCC_8974 is not set +# CONFIG_MSM_MMCC_8996 is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_QCOM_SMEM_PARTS=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_HWMON=y +CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_TAG_QCA=y +# CONFIG_NET_DSA_VITESSE_VSC73XX is not set +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=2 +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +# CONFIG_PCI_V3_SEMI is not set +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DEBUG=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLINK=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_DWC3 is not set +CONFIG_PHY_QCOM_IPQ806X_SATA=y +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +CONFIG_PINCTRL_IPQ8064=y +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_SDM845 is not set +CONFIG_PLUGIN_HOSTCC="g++" +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK=y +# CONFIG_QCOM_A53PLL is not set +CONFIG_QCOM_ADM=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_CLK_RPM=y +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_QCOM_GENI_SE is not set +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_HFPLL=y +# CONFIG_QCOM_IOMMU is not set +# CONFIG_QCOM_LLCC is not set +# CONFIG_QCOM_PDC is not set +CONFIG_QCOM_PM=y +CONFIG_QCOM_QFPROM=y +# CONFIG_QCOM_RMTFS_MEM is not set +CONFIG_QCOM_RPMCC=y +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_32=y +# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +CONFIG_QCOM_SMEM=y +# CONFIG_QCOM_SMSM is not set +CONFIG_QCOM_TCSR=y +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_WDT=y +# CONFIG_QRTR is not set +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_REFCOUNT_FULL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_RPM=y +# CONFIG_REGULATOR_QCOM_SPMI is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SDM_GCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +CONFIG_SERIAL_8250_FSL=y +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_SPMI_PMIC_CLKDIV is not set +CONFIG_SRCU=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VDSO=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 0000000000..02f60c90ee --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,229 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + }; +}; + +&qcom_pinmux { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + force_gen1 = <1>; +}; + +&nand { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "qcom,smem"; + }; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&sata_phy { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts new file mode 100644 index 0000000000..de347643dc --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts @@ -0,0 +1,264 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP161"; + compatible = "qcom,ipq8064-ap161", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio2", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", + "gpio32", "gpio51", "gpio52", + "gpio59", "gpio60", "gpio61", + "gpio62" , "gpio66"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + force_gen1 = <1>; + }; + + pcie2: pci@1b900000 { + status = "okay"; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x20080 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + qca,phy-rgmii-en; + qca,txclk-delay-en; + qca,rxclk-delay-en; + }; + + phy3: ethernet-phy@3 { + device_type = "ethernet-phy"; + reg = <3>; + }; + }; + + gmac0: ethernet@37000000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + mdiobus = <&mdio0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + mdiobus = <&mdio0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + mdiobus = <&mdio0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts new file mode 100644 index 0000000000..d90518bf22 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -0,0 +1,479 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "TP-Link Archer C2600"; + compatible = "tplink,c2600", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &general; + led-running = &power; + led-upgrade = &general; + label-mac-device = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", + "gpio53", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pin: usb0_pwr_en_pin { + mux { + pins = "gpio25"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; + + usb1_pwr_en_pin: usb1_pwr_en_pin { + mux { + pins = "gpio23"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi5: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x20000>; + read-only; + }; + + SBL3@60000 { + label = "SBL3"; + reg = <0x60000 0x30000>; + read-only; + }; + + DDRCONFIG@90000 { + label = "DDRCONFIG"; + reg = <0x90000 0x10000>; + read-only; + }; + + SSD@a0000 { + label = "SSD"; + reg = <0xa0000 0x10000>; + read-only; + }; + + TZ@b0000 { + label = "TZ"; + reg = <0xb0000 0x30000>; + read-only; + }; + + RPM@e0000 { + label = "RPM"; + reg = <0xe0000 0x20000>; + read-only; + }; + + fs-uboot@100000 { + label = "fs-uboot"; + reg = <0x100000 0x70000>; + read-only; + }; + + uboot-env@170000 { + label = "uboot-env"; + reg = <0x170000 0x40000>; + read-only; + }; + + radio@1b0000 { + label = "radio"; + reg = <0x1b0000 0x40000>; + read-only; + }; + + os-image@1f0000 { + label = "os-image"; + reg = <0x1f0000 0x400000>; + }; + + rootfs@5f0000 { + label = "rootfs"; + reg = <0x5f0000 0x1900000>; + }; + + defaultmac: default-mac@1ef0000 { + label = "default-mac"; + reg = <0x1ef0000 0x00200>; + read-only; + }; + + pin@1ef0200 { + label = "pin"; + reg = <0x1ef0200 0x00200>; + read-only; + }; + + product-info@1ef0400 { + label = "product-info"; + reg = <0x1ef0400 0x0fc00>; + read-only; + }; + + partition-table@1f00000 { + label = "partition-table"; + reg = <0x1f00000 0x10000>; + read-only; + }; + + soft-version@1f10000 { + label = "soft-version"; + reg = <0x1f10000 0x10000>; + read-only; + }; + + support-list@1f20000 { + label = "support-list"; + reg = <0x1f20000 0x10000>; + read-only; + }; + + profile@1f30000 { + label = "profile"; + reg = <0x1f30000 0x10000>; + read-only; + }; + + default-config@1f40000 { + label = "default-config"; + reg = <0x1f40000 0x10000>; + read-only; + }; + + user-config@1f50000 { + label = "user-config"; + reg = <0x1f50000 0x40000>; + read-only; + }; + + qos-db@1f90000 { + label = "qos-db"; + reg = <0x1f90000 0x40000>; + read-only; + }; + + usb-config@1fd0000 { + label = "usb-config"; + reg = <0x1fd0000 0x10000>; + read-only; + }; + + log@1fe0000 { + label = "log"; + reg = <0x1fe0000 0x20000>; + read-only; + }; + }; + }; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + + pinctrl-0 = <&usb0_pwr_en_pin>; + pinctrl-names = "default"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + + pinctrl-0 = <&usb1_pwr_en_pin>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&defaultmac 0x8>; + mtd-mac-address-increment = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&defaultmac 0x8>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + ledswitch { + label = "ledswitch"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LIGHTS_TOGGLE>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + lan { + label = "c2600:white:lan"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; + }; + + usb4 { + label = "c2600:white:usb_4"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "c2600:white:usb_2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "c2600:white:wps"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "c2600:amber:wan"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + wan_white { + label = "c2600:white:wan"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "c2600:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + general: general { + label = "c2600:white:general"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts new file mode 100644 index 0000000000..241c00962a --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -0,0 +1,396 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Netgear Nighthawk X4 D7800"; + compatible = "netgear,d7800", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0xe000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0400000>; + }; + + ubi@1880000 { + label = "ubi"; + reg = <0x1880000 0x1C00000>; + }; + + netgear@3480000 { + label = "netgear"; + reg = <0x3480000 0x4480000>; + read-only; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "d7800:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "d7800:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + power_amber: power_amber { + label = "d7800:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "d7800:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "d7800:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "d7800:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "d7800:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power_white: power_white { + label = "d7800:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "d7800:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts new file mode 100644 index 0000000000..5da523a728 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts @@ -0,0 +1,216 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/DB149"; + compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + alias { + serial0 = &uart2; + mdio-gpio0 = &mdio0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii0_pins: rgmii0_pins { + mux { + pins = "gpio2", "gpio66"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi2: gsbi@12480000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + uart2: serial@12490000 { + status = "okay"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + + partition@0 { + label = "lowlevel_init"; + reg = <0x0 0x1b0000>; + }; + + partition@1 { + label = "u-boot"; + reg = <0x1b0000 0x80000>; + }; + + partition@2 { + label = "u-boot-env"; + reg = <0x230000 0x40000>; + }; + + partition@3 { + label = "caldata"; + reg = <0x270000 0x40000>; + }; + + partition@4 { + label = "firmware"; + reg = <0x2b0000 0x1d50000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + }; + + pcie2: pci@1b900000 { + status = "okay"; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + + phy6: ethernet-phy@6 { + reg = <6>; + }; + + phy7: ethernet-phy@7 { + reg = <7>; + }; + }; + + gmac0: ethernet@37000000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&phy4>; + + pinctrl-0 = <&rgmii0_pins>; + pinctrl-names = "default"; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + phy-handle = <&phy6>; + }; + + gmac3: ethernet@37600000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&phy7>; + }; + }; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts new file mode 100644 index 0000000000..b052ca6fcb --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -0,0 +1,388 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Linksys EA8500 WiFi Router"; + compatible = "linksys,ea8500", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "console=ttyMSM0,115200n8"; + stdout-path = "serial0:115200n8"; + append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio53", "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + force_gen1 = <1>; + }; + + pcie1: pci@1b700000 { + status = "okay"; + }; + + pcie2: pci@1b900000 { + status = "okay"; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + MIBIB@40000 { + label = "MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + + SBL2@180000 { + label = "SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + + SBL3@2c0000 { + label = "SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + + DDRCONFIG@540000 { + label = "DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + + SSD@660000 { + label = "SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + + TZ@780000 { + label = "TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + + RPM@a00000 { + label = "RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + + art: art@c80000 { + label = "art"; + reg = <0x0c80000 0x0140000>; + read-only; + }; + + APPSBL@dc0000 { + label = "APPSBL"; + reg = <0x0dc0000 0x0100000>; + read-only; + }; + + u_env@ec0000 { + label = "u_env"; + reg = <0x0ec0000 0x0040000>; + }; + + s_env@f00000 { + label = "s_env"; + reg = <0x0f00000 0x0040000>; + }; + + devinfo@f40000 { + label = "devinfo"; + reg = <0x0f40000 0x0040000>; + }; + + linux@f80000 { + label = "kernel1"; + reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ + }; + + rootfs@1280000 { + label = "rootfs1"; + reg = <0x1280000 0x2500000>; + }; + + linux2@3780000 { + label = "kernel2"; + reg = <0x3780000 0x2800000>; + }; + + rootfs2@3a80000 { + label = "rootfs2"; + reg = <0x3a80000 0x2500000>; + }; + + syscfg@5f80000 { + label = "syscfg"; + reg = <0x5f80000 0x2080000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + //lan + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + adm_dma: dma@18300000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART >; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + wps { + label = "ea8500:green:wps"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "ea8500:white:power"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wifi { + label = "ea8500:green:wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; + }; + }; +}; + diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts new file mode 100644 index 0000000000..dd596f52b4 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -0,0 +1,366 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + model = "Netgear Nighthawk X4 R7500"; + compatible = "netgear,r7500", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0xe000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + clocks = <&gcc USB30_1_MASTER_CLK>; + status = "okay"; + }; + + usb3_1: usb3@100f8800 { + clocks = <&gcc USB30_0_MASTER_CLK>; + status = "okay"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + kernel@1340000 { + label = "kernel"; + reg = <0x1340000 0x0400000>; + }; + + ubi@1740000 { + label = "ubi"; + reg = <0x1740000 0x1600000>; + }; + + netgear@2d40000 { + label = "netgear"; + reg = <0x2d40000 0x0c00000>; + read-only; + }; + + reserve@3940000 { + label = "reserve"; + reg = <0x3940000 0x46c0000>; + read-only; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "r7500:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "r7500:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + power_amber: power_amber { + label = "r7500:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "r7500:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "r7500:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7500:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7500:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power_white: power_white { + label = "r7500:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "r7500:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tcsr { + qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; + compatible = "qcom,tcsr"; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts new file mode 100644 index 0000000000..463c0abb40 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -0,0 +1,395 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Netgear Nighthawk X4 R7500v2"; + compatible = "netgear,r7500v2", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + + rsvd@5fe00000 { + reg = <0x5fe00000 0x200000>; + reusable; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0400000>; + }; + + ubi@1880000 { + label = "ubi"; + reg = <0x1880000 0x6080000>; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "r7500v2:amber:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb3 { + label = "r7500v2:amber:usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + status { + label = "r7500v2:amber:status"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + internet { + label = "r7500v2:white:internet"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "r7500v2:white:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7500v2:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7500v2:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "r7500v2:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "r7500v2:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi new file mode 100644 index 0000000000..dd272c7fc7 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi @@ -0,0 +1,30 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + soc: soc { + + pcie0: pci@1b500000 { + phy-tx0-term-offset = <0>; + }; + + pcie1: pci@1b700000 { + phy-tx0-term-offset = <0>; + }; + + pcie2: pci@1b900000 { + phy-tx0-term-offset = <0>; + }; + }; +}; + +&ss_phy_0 { + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <0xa0>; +}; + +&ss_phy_1 { + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <0xa0>; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts new file mode 100644 index 0000000000..bdcd302802 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -0,0 +1,402 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "TP-Link Archer VR2600v"; + compatible = "tplink,vr2600v", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &general; + led-running = &power; + led-upgrade = &general; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", + "gpio26", "gpio53", "gpio56", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: W25Q128@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x40000>; + read-only; + }; + + SBL3@80000 { + label = "SBL3"; + reg = <0x80000 0x80000>; + read-only; + }; + + DDRCONFIG@100000 { + label = "DDRCONFIG"; + reg = <0x100000 0x10000>; + read-only; + }; + + SSD@110000 { + label = "SSD"; + reg = <0x110000 0x10000>; + read-only; + }; + + TZ@120000 { + label = "TZ"; + reg = <0x120000 0x80000>; + read-only; + }; + + RPM@1a0000 { + label = "RPM"; + reg = <0x1a0000 0x80000>; + read-only; + }; + + APPSBL@220000 { + label = "APPSBL"; + reg = <0x220000 0x80000>; + read-only; + }; + + APPSBLENV@2a0000 { + label = "APPSBLENV"; + reg = <0x2a0000 0x40000>; + read-only; + }; + + OLDART@2e0000 { + label = "OLDART"; + reg = <0x2e0000 0x40000>; + read-only; + }; + + kernel@320000 { + label = "kernel"; + reg = <0x320000 0x300000>; + }; + + rootfs@620000 { + label = "rootfs"; + reg = <0x620000 0x960000>; + }; + + defaultmac: default-mac@0xfaf100 { + label = "default-mac"; + reg = <0xfaf100 0x00200>; + read-only; + }; + + ART@fc0000 { + label = "ART"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&defaultmac 0>; + mtd-mac-address-increment = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&defaultmac 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + dect { + label = "dect"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PHONE>; + }; + + ledswitch { + label = "ledswitch"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LIGHTS_TOGGLE>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + dsl { + label = "vr2600v:white:dsl"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "vr2600v:white:usb"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "vr2600v:white:lan"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "vr2600v:white:wlan2g"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "vr2600v:white:wlan5g"; + gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "vr2600v:white:power"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + phone { + label = "vr2600v:white:phone"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "vr2600v:white:wan"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; + }; + + general: general { + label = "vr2600v:white:general"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts new file mode 100644 index 0000000000..6667b1f473 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts @@ -0,0 +1,427 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "NEC Aterm WG2600HP"; + compatible = "nec,wg2600hp", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x06000000 /* PAD0_MODE */ + 0x0000c 0x00080080 /* PAD6_MODE */ + 0x000e4 0x0006a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x0000004e /* PORT0_STATUS */ + 0x00094 0x0000004e /* PORT6_STATUS */ + >; + }; + + ethernet-phy@4 { + reg = <4>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + bridge { + label = "bridge"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + + converter { + label = "converter"; + gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + converter_green { + label = "wg2600hp:green:converter"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; + }; + + power_red: power_red { + label = "wg2600hp:red:power"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + active_green { + label = "wg2600hp:green:active"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + active_red { + label = "wg2600hp:red:active"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + power_green: power_green { + label = "wg2600hp:green:power"; + gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; + }; + + converter_red { + label = "wg2600hp:red:converter"; + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_green { + label = "wg2600hp:green:wlan2g"; + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_red { + label = "wg2600hp:red:wlan2g"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; + }; + + wlan5g_green { + label = "wg2600hp:green:wlan5g"; + gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; + }; + + wlan5g_red { + label = "wg2600hp:red:wlan5g"; + gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; + }; + + tv_green { + label = "wg2600hp:green:tv"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + + tv_red { + label = "wg2600hp:red:tv"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&PRODUCTDATA 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&PRODUCTDATA 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi4 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi4_serial { + status = "okay"; +}; + +&gsbi5 { + status = "okay"; + + qcom,mode = <GSBI_PROT_SPI>; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x40000>; + read-only; + }; + + SBL3@80000 { + label = "SBL3"; + reg = <0x80000 0x80000>; + read-only; + }; + + DDRCONFIG@100000 { + label = "DDRCONFIG"; + reg = <0x100000 0x10000>; + read-only; + }; + + SSD@110000 { + label = "SSD"; + reg = <0x110000 0x10000>; + read-only; + }; + + TZ@120000 { + label = "TZ"; + reg = <0x120000 0x80000>; + read-only; + }; + + RPM@1a0000 { + label = "RPM"; + reg = <0x1a0000 0x80000>; + read-only; + }; + + APPSBL@220000 { + label = "APPSBL"; + reg = <0x220000 0x80000>; + read-only; + }; + + APPSBLENV@2a0000 { + label = "APPSBLENV"; + reg = <0x2a0000 0x10000>; + }; + + PRODUCTDATA: PRODUCTDATA@2b0000 { + label = "PRODUCTDATA"; + reg = <0x2b0000 0x30000>; + read-only; + }; + + ART@2e0000 { + label = "ART"; + reg = <0x2e0000 0x40000>; + read-only; + }; + + TP@320000 { + label = "TP"; + reg = <0x320000 0x40000>; + read-only; + }; + + TINY@360000 { + label = "TINY"; + reg = <0x360000 0x500000>; + read-only; + }; + + firmware@860000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x860000 0x17a0000>; + }; + }; + }; + }; +}; + +&usb3_0 { + status = "okay"; + + pinctrl-0 = <&usb_pwr_en_pins>; + pinctrl-names = "default"; +}; + +&usb3_1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + force_gen1 = <1>; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", + "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", + "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb_pwr_en_pins: usb_pwr_en_pins { + mux { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-high; + }; + }; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts new file mode 100644 index 0000000000..a1e7791d12 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts @@ -0,0 +1,563 @@ +/* + * BSD LICENSE + * + * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de> + * Copyright (C) 2018 Mathias Kresin <dev@kresin.me> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of any + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "qcom-ipq8064-v1.0.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + compatible = "compex,wpq864", "qcom,ipq8064"; + model = "Compex WPQ864"; + + aliases { + mdio-gpio0 = &mdio0; + serial0 = &gsbi4_serial; + ethernet0 = &gmac1; + ethernet1 = &gmac0; + + led-boot = &led_pass; + led-failsafe = &led_fail; + led-running = &led_pass; + led-upgrade = &led_pass; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + rpm@108000 { + pinctrl-0 = <&rpm_pins>; + pinctrl-names = "default"; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + mt29f2g08abbeah4@0 { + compatible = "qcom,nandcs"; + + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + MIBIB@40000 { + label = "MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + + SBL2@180000 { + label = "SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + + SBL3@2c0000 { + label = "SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + + DDRCONFIG@540000 { + label = "DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + + SSD@660000 { + label = "SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + + TZ@780000 { + label = "TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + + RPM@a00000 { + label = "RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + }; + + ART@1200000 { + label = "ART"; + reg = <0x1200000 0x0140000>; + }; + + ubi@1340000 { + label = "ubi"; + reg = <0x1340000 0x4000000>; + }; + + BOOTCONFIG@5340000 { + label = "BOOTCONFIG"; + reg = <0x5340000 0x0060000>; + }; + + SBL2-1@53a0000- { + label = "SBL2_1"; + reg = <0x53a0000 0x0140000>; + read-only; + }; + + SBL3-1@54e0000 { + label = "SBL3_1"; + reg = <0x54e0000 0x0280000>; + read-only; + }; + + DDRCONFIG-1@5760000 { + label = "DDRCONFIG_1"; + reg = <0x5760000 0x0120000>; + read-only; + }; + + SSD-1@5880000 { + label = "SSD_1"; + reg = <0x5880000 0x0120000>; + read-only; + }; + + TZ-1@59a0000 { + label = "TZ_1"; + reg = <0x59a0000 0x0280000>; + read-only; + }; + + RPM-1@5c20000 { + label = "RPM_1"; + reg = <0x5c20000 0x0280000>; + read-only; + }; + + BOOTCONFIG1@5ea0000 { + label = "BOOTCONFIG1"; + reg = <0x5ea0000 0x0060000>; + }; + + APPSBL-1@5f00000 { + label = "APPSBL_1"; + reg = <0x5f00000 0x0500000>; + read-only; + }; + + ubi-1@6400000 { + label = "ubi_1"; + reg = <0x6400000 0x4000000>; + }; + + unused@a400000 { + label = "unused"; + reg = <0xa400000 0x5c00000>; + }; + }; + }; + }; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "virtual,mdio-gpio"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + + ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + ethernet-phy@4 { + reg = <4>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + rss4 { + label = "wpq864:green:rss4"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + rss3 { + label = "wpq864:green:rss3"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + rss2 { + label = "wpq864:orange:rss2"; + gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; + }; + + rss1 { + label = "wpq864:red:rss1"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + led_pass: pass { + label = "wpq864:green:pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + led_fail: fail { + label = "wpq864:green:fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "wpq864:green:usb"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb-pcie { + label = "wpq864:green:usb-pcie"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + beeper { + compatible = "gpio-beeper"; + + pinctrl-0 = <&beeper_pins>; + pinctrl-names = "default"; + + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi4 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi4_serial { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "okay"; + + qcom,mode = <GSBI_PROT_SPI>; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + s25fl256s1@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; +}; + +&ss_phy_0 { /* USB3 port 0 SS phy */ + status = "okay"; + + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <160>; +}; + +&ss_phy_1 { /* USB3 port 1 SS phy */ + status = "okay"; + + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <160>; +}; + +&pcie0 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; +}; + +&qcom_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + pcie0_pcie2_perst { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + beeper_pins: beeper_pins { + mux { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rpm_pins: rpm_pins { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <10>; + bias-disable; + }; + }; + + uart0_pins: uart0_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gsbi4"; + drive-strength = <10>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi5"; + drive-strength = <10>; + bias-pull-down; + }; + + clk { + pins = "gpio21"; + function = "gsbi5"; + drive-strength = <12>; + bias-pull-down; + }; + + cs { + pins = "gpio20"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", "gpio37", + "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", "gpio43", + "gpio44", "gpio45", "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", + "gpio31", "gpio32", "gpio51", "gpio52", + "gpio59", "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&usb3_0 { + status = "okay"; +}; + + +&usb3_1 { + status = "okay"; +}; + +&tcsr { + qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts new file mode 100644 index 0000000000..b4770102e2 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts @@ -0,0 +1,520 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include "qcom-ipq8064-v2.0.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Buffalo WXR-2533DHP"; + compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064"; + + memory@42000000 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + + led-boot = &power; + led-failsafe = &diag; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + /* use "ubi_rootfs" volume in "ubi" partition as rootfs */ + bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs"; + stdout-path = "serial0:115200n8"; + }; + + soc { + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs@0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubi@0 { + label = "ubi"; + reg = <0x0000000 0x4000000>; + }; + + rootfs_1@4000000 { + label = "rootfs_1"; + reg = <0x4000000 0x4000000>; + }; + }; + }; + }; + + mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x07600000 /* PAD0_MODE */ + 0x00008 0x01000000 /* PAD5_MODE */ + 0x0000c 0x00000080 /* PAD6_MODE */ + 0x00050 0xcc35cc35 /* LED_CTRL0 */ + 0x00054 0xca35ca35 /* LED_CTRL1 */ + 0x00058 0xc935c935 /* LED_CTRL2 */ + 0x0005c 0x03ffff00 /* LED_CTRL3 */ + 0x000e4 0x0006a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x0000007e /* PORT0_STATUS */ + 0x00094 0x0000007e /* PORT6_STATUS */ + >; + }; + + ethernet-phy@4 { + reg = <4>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb { + label = "wxr-2533dhp:green:usb"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port0 &hub_port1>; + }; + + guestport { + label = "wxr-2533dhp:green:guestport"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + diag: diag { + label = "wxr-2533dhp:orange:diag"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + internet_orange { + label = "wxr-2533dhp:orange:internet"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; + }; + + internet_white { + label = "wxr-2533dhp:white:internet"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wireless_orange { + label = "wxr-2533dhp:orange:wireless"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wireless_white { + label = "wxr-2533dhp:white:wireless"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + router_orange { + label = "wxr-2533dhp:orange:router"; + gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; + }; + + router_white { + label = "wxr-2533dhp:white:router"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "wxr-2533dhp:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + power { + label = "power"; + gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + eject { + label = "eject"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_EJECTCD>; + }; + + guest { + label = "guest"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + ap { + label = "ap"; + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + + router { + label = "router"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + + auto { + label = "auto"; + gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&ART 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&ART 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi4 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi4_serial { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "okay"; + qcom,mode = <GSBI_PROT_SPI>; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x10000>; + read-only; + }; + + MIBIB@10000 { + label = "MIBIB"; + reg = <0x10000 0x20000>; + read-only; + }; + + SBL2@30000 { + label = "SBL2"; + reg = <0x30000 0x30000>; + read-only; + }; + + SBL3@60000 { + label = "SBL3"; + reg = <0x60000 0x30000>; + read-only; + }; + + DDRCONFIG@90000 { + label = "DDRCONFIG"; + reg = <0x90000 0x10000>; + read-only; + }; + + SSD@a0000 { + label = "SSD"; + reg = <0xa0000 0x10000>; + read-only; + }; + + TZ@b0000 { + label = "TZ"; + reg = <0xb0000 0x30000>; + read-only; + }; + + RPM@e0000 { + label = "RPM"; + reg = <0xe0000 0x20000>; + read-only; + }; + + APPSBL@100000 { + label = "APPSBL"; + reg = <0x100000 0x70000>; + read-only; + }; + + APPSBLENV@170000 { + label = "APPSBLENV"; + reg = <0x170000 0x10000>; + read-only; + }; + + ART: ART@180000 { + label = "ART"; + reg = <0x180000 0x40000>; + read-only; + }; + + BOOTCONFIG@1c0000 { + label = "BOOTCONFIG"; + reg = <0x1c0000 0x10000>; + read-only; + }; + + APPSBL_1@1d0000 { + label = "APPSBL_1"; + reg = <0x1d0000 0x70000>; + read-only; + }; + }; + }; + }; +}; + +&usb3_0 { + status = "okay"; + + pinctrl-0 = <&usb_pwr_en_pins>; + pinctrl-names = "default"; +}; + +&usb3_1 { + status = "okay"; +}; + +&dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&dwc3_1 { + #address-cells = <1>; + #size-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + force_gen1 = <1>; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57", + "gpio58", "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart0_pins: uart0_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs{ + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb_pwr_en_pins: usb_pwr_en_pins { + mux{ + pins = "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + }; +};
\ No newline at end of file diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 0000000000..f95b0b4f95 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,1512 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/clock/qcom,lcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acpu0_aux>; + qcom,saw = <&saw0>; + clocks = <&kraitcc 0>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2a>; + operating-points-v2 = <&opp_table0>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acpu1_aux>; + qcom,saw = <&saw1>; + clocks = <&kraitcc 1>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2b>; + operating-points-v2 = <&opp_table0>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + + qcom,l2 { + qcom,l2-rates = <384000000 1000000000 1200000000>; + qcom,l2-cpufreq = <384000000 600000000 1200000000>; + qcom,l2-volt = <1100000 1100000 1150000>; + qcom,l2-supply = <&smb208_s1a>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + status = "okay"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; + }; + + opp_table0: opp_table0 { + compatible = "operating-points-v2-qcom-cpu"; + nvmem-cells = <&speedbin_efuse>; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0-v0 = <1000000>; + opp-microvolt-speed0-pvs1-v0 = <925000>; + opp-microvolt-speed0-pvs2-v0 = <875000>; + opp-microvolt-speed0-pvs3-v0 = <800000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt-speed0-pvs0-v0 = <1050000>; + opp-microvolt-speed0-pvs1-v0 = <975000>; + opp-microvolt-speed0-pvs2-v0 = <925000>; + opp-microvolt-speed0-pvs3-v0 = <850000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt-speed0-pvs0-v0 = <1100000>; + opp-microvolt-speed0-pvs1-v0 = <1025000>; + opp-microvolt-speed0-pvs2-v0 = <995000>; + opp-microvolt-speed0-pvs3-v0 = <900000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt-speed0-pvs0-v0 = <1150000>; + opp-microvolt-speed0-pvs1-v0 = <1075000>; + opp-microvolt-speed0-pvs2-v0 = <1025000>; + opp-microvolt-speed0-pvs3-v0 = <950000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt-speed0-pvs0-v0 = <1200000>; + opp-microvolt-speed0-pvs1-v0 = <1125000>; + opp-microvolt-speed0-pvs2-v0 = <1075000>; + opp-microvolt-speed0-pvs3-v0 = <1000000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt-speed0-pvs0-v0 = <1250000>; + opp-microvolt-speed0-pvs1-v0 = <1175000>; + opp-microvolt-speed0-pvs2-v0 = <1125000>; + opp-microvolt-speed0-pvs3-v0 = <1050000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + }; + + thermal-zones { + tsens_tz_sensor0 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 0>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor6 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor7 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor8 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor9 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor10 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem: smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + fab-scaling { + compatible = "qcom,fab-scaling"; + clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>; + clock-names = "apps-fab-clk", "ddr-fab-clk"; + fab_freq_high = <533000000>; + fab_freq_nominal = <400000000>; + cpu_freq_threshold = <1000000000>; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq806x"; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,qfprom", "syscon"; + reg = <0x700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + tsens_calib: calib@400 { + reg = <0x400 0xb>; + }; + tsens_backup: backup@410 { + reg = <0x410 0xb>; + }; + speedbin_efuse: speedbin@0c0 { + reg = <0x0c0 0x4>; + }; + }; + + rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ack", + "err", + "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + #address-cells = <1>; + #size-cells = <0>; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + output-low; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + + acpu0_aux: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; + }; + + acpu1_aux: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu1_aux"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw_l2: regulator@02012000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02012000 0x1000>; + regulator; + }; + + sic_non_secure: sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart2: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart5: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata: sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + ports-implemented = <0x1>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tsens: thermal-sensor@900000 { + compatible = "qcom,ipq8064-tsens"; + reg = <0x900000 0x3680>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sfpb_mutex_block: syscon@1200600 { + compatible = "syscon"; + reg = <0x01200600 0x100>; + }; + + hs_phy_0: hs_phy_0 { + compatible = "qcom,dwc3-hs-usb-phy"; + regmap = <&usb3_0>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + ss_phy_0: ss_phy_0 { + compatible = "qcom,dwc3-ss-usb-phy"; + regmap = <&usb3_0>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + usb3_0: usb3@110f8800 { + compatible = "qcom,dwc3", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x110f8800 0x8000>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_0: dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_1: hs_phy_1 { + compatible = "qcom,dwc3-hs-usb-phy"; + regmap = <&usb3_1>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + ss_phy_1: ss_phy_1 { + compatible = "qcom,dwc3-ss-usb-phy"; + regmap = <&usb3_1>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; + + usb3_1: usb3@100f8800 { + compatible = "qcom,dwc3", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100f8800 0x8000>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_1: dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + adm_dma: dma@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + + nand: nand@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; + + qsgmii_csr: syscon@1bb00000 { + compatible = "syscon"; + reg = <0x1bb00000 0x000001FF>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + gmac0: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37000000 0x200000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac1: ethernet@37200000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37200000 0x200000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE2_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE2_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac2: ethernet@37400000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37400000 0x200000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE3_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE3_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac3: ethernet@37600000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37600000 0x200000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE4_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE4_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; + }; + + sfpb_mutex: sfpb-mutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_block 4 4>; + + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem>; + hwlocks = <&sfpb_mutex 3>; + }; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts new file mode 100644 index 0000000000..378ea775b5 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -0,0 +1,371 @@ +#include "qcom-ipq8065.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "ZyXEL NBG6817"; + compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + sdcc1 = &sdcc1; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd"; + stdout-path = "serial0:115200n8"; + append-rootblock = "root=/dev/mmcblk0p"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio53", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio9", "gpio26", "gpio33", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + clk { + pins = "gpio1"; + input-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; + input-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + + cs { + pins = "gpio20"; + drive-strength = <12>; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <12>; + }; + + pwr { + pins = "gpio17"; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio16"; + bias-pull-up; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <12>; + }; + + pwr { + pins = "gpio14"; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <51200000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "okay"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ + 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ + 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ + 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ + 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ + 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ + 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ + 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ + 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ + 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ + 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ + 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ + 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ + 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + qca,ar8327-initvals = < + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x0000c 0x80 /* PAD6_MODE */ + >; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <0>; + qcom,rgmii_delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + amba { + sdcc1: sdcc@12400000 { + status = "okay"; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + linux,input-type = <EV_SW>; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + internet { + label = "nbg6817:white:internet"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "nbg6817:white:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi2g { + label = "nbg6817:amber:wifi2g"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + }; + + /* wifi2g amber from the manual is missing */ + + wifi5g { + label = "nbg6817:amber:wifi5g"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + /* wifi5g amber from the manual is missing */ + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts new file mode 100644 index 0000000000..f93039f727 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -0,0 +1,531 @@ +#include "qcom-ipq8065.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Netgear Nighthawk X4S R7800"; + compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + + rsvd@5fe00000 { + reg = <0x5fe00000 0x200000>; + reusable; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + label-mac-device = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nand_pins: nand_pins { + disable { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + clk { + pins = "gpio1"; + input-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; + input-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + spi6_pins: spi6_pins { + mux { + pins = "gpio55", "gpio56", "gpio58"; + function = "gsbi6"; + bias-pull-down; + }; + + mosi { + pins = "gpio55"; + drive-strength = <12>; + }; + + miso { + pins = "gpio56"; + drive-strength = <14>; + }; + + cs { + pins = "gpio57"; + drive-strength = <12>; + bias-pull-up; + }; + + clk { + pins = "gpio58"; + drive-strength = <12>; + }; + + reset { + pins = "gpio33"; + drive-strength = <10>; + bias-pull-down; + output-high; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "okay"; + }; + + usb3_0: usb3@110f8800 { + status = "okay"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb3_1: usb3@100f8800 { + status = "okay"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "okay"; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "pci168c,0046"; + reg = <0x00010000 0 0 0 0>; + + mtd-mac-address = <&art 6>; + mtd-mac-address-increment = <(1)>; + }; + }; + }; + + pcie1: pci@1b700000 { + status = "okay"; + force_gen1 = <1>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "pci168c,0046"; + reg = <0x00010000 0 0 0 0>; + + mtd-mac-address = <&art 6>; + mtd-mac-address-increment = <(2)>; + }; + }; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0400000>; + }; + + ubi@1880000 { + label = "ubi"; + reg = <0x1880000 0x6080000>; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + + phy0: ethernet-phy@0 { + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ + 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ + 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ + 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ + 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ + 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ + 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ + 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ + 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ + 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ + 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ + 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ + 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ + 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ + >; + qca,ar8327-vlans = < + 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */ + 0x2 0x21 /* VLAN2 Ports 0/5 */ + >; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + qca,ar8327-initvals = < + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x0000c 0x80 /* PAD6_MODE */ + >; + }; + }; + + gmac1: ethernet@37200000 { + status = "okay"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <0>; + qcom,rgmii_delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "okay"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + power_white: power_white { + label = "r7800:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + power_amber: power_amber { + label = "r7800:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "r7800:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "r7800:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + usb1 { + label = "r7800:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "r7800:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7800:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "r7800:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7800:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi new file mode 100644 index 0000000000..fdd4697887 --- /dev/null +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -0,0 +1,128 @@ +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; + + soc: soc { + + rpm@108000 { + + regulators { + + smb208_s2a: s2a { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + }; + }; + }; + }; + + cpus { + qcom,l2 { + qcom,l2-cpufreq = <384000000 600000000 1400000000>; + }; + + idle-states { + CPU_SPC: spc { + status = "disabled"; + }; + }; + }; +}; + +&opp_table0 { + compatible = "operating-points-v2-qcom-cpu"; + nvmem-cells = <&speedbin_efuse>; + + /* + * On ipq8065 1.2 ghz freq is not present + * Remove it to make cpufreq work and not + * complain for missing definition + */ + + /delete-node/opp-1200000000; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0-v0 = <975000>; + opp-microvolt-speed0-pvs1-v0 = <950000>; + opp-microvolt-speed0-pvs2-v0 = <925000>; + opp-microvolt-speed0-pvs3-v0 = <900000>; + opp-microvolt-speed0-pvs4-v0 = <875000>; + opp-microvolt-speed0-pvs5-v0 = <825000>; + opp-microvolt-speed0-pvs6-v0 = <775000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt-speed0-pvs0-v0 = <1000000>; + opp-microvolt-speed0-pvs1-v0 = <975000>; + opp-microvolt-speed0-pvs2-v0 = <950000>; + opp-microvolt-speed0-pvs3-v0 = <925000>; + opp-microvolt-speed0-pvs4-v0 = <900000>; + opp-microvolt-speed0-pvs5-v0 = <850000>; + opp-microvolt-speed0-pvs6-v0 = <800000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt-speed0-pvs0-v0 = <1050000>; + opp-microvolt-speed0-pvs1-v0 = <1025000>; + opp-microvolt-speed0-pvs2-v0 = <1000000>; + opp-microvolt-speed0-pvs3-v0 = <975000>; + opp-microvolt-speed0-pvs4-v0 = <950000>; + opp-microvolt-speed0-pvs5-v0 = <900000>; + opp-microvolt-speed0-pvs6-v0 = <850000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt-speed0-pvs0-v0 = <1100000>; + opp-microvolt-speed0-pvs1-v0 = <1075000>; + opp-microvolt-speed0-pvs2-v0 = <1050000>; + opp-microvolt-speed0-pvs3-v0 = <1025000>; + opp-microvolt-speed0-pvs4-v0 = <1000000>; + opp-microvolt-speed0-pvs5-v0 = <950000>; + opp-microvolt-speed0-pvs6-v0 = <900000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt-speed0-pvs0-v0 = <1175000>; + opp-microvolt-speed0-pvs1-v0 = <1150000>; + opp-microvolt-speed0-pvs2-v0 = <1125000>; + opp-microvolt-speed0-pvs3-v0 = <1100000>; + opp-microvolt-speed0-pvs4-v0 = <1075000>; + opp-microvolt-speed0-pvs5-v0 = <1025000>; + opp-microvolt-speed0-pvs6-v0 = <975000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; + + opp-1725000000 { + opp-hz = /bits/ 64 <1725000000>; + opp-microvolt-speed0-pvs0-v0 = <1262500>; + opp-microvolt-speed0-pvs1-v0 = <1225000>; + opp-microvolt-speed0-pvs2-v0 = <1200000>; + opp-microvolt-speed0-pvs3-v0 = <1175000>; + opp-microvolt-speed0-pvs4-v0 = <1150000>; + opp-microvolt-speed0-pvs5-v0 = <1100000>; + opp-microvolt-speed0-pvs6-v0 = <1050000>; + opp-supported-hw = <0x1>; + clock-latency-ns = <100000>; + }; +}; diff --git a/target/linux/ipq806x/patches-5.4/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-5.4/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch new file mode 100644 index 0000000000..83d7bbc6f4 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch @@ -0,0 +1,71 @@ +From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen <twp@codeaurora.org> +Date: Mon, 16 May 2016 17:58:50 -0700 +Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers + +Original patch from Andy Gross. + +This patch removes the crci information from the dma +channel property. At least one client device requires +using more than one CRCI value for a channel. This does +not match the current binding and the crci information +needs to be removed. + +Instead, the client device will provide this information +via other means. + +Signed-off-by: Andy Gross <agross@codeaurora.org> +Signed-off-by: Thomas Pedersen <twp@codeaurora.org> +--- + Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++---------- + 1 file changed, 6 insertions(+), 10 deletions(-) + +--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt ++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt +@@ -4,8 +4,7 @@ Required properties: + - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 + - reg: Address range for DMA registers + - interrupts: Should contain one interrupt shared by all channels +-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell +- denotes CRCI (client rate control interface) flow control assignment. ++- #dma-cells: must be <1>. First cell denotes the channel number. + - clocks: Should contain the core clock and interface clock. + - clock-names: Must contain "core" for the core clock and "iface" for the + interface clock. +@@ -22,7 +21,7 @@ Example: + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; +- #dma-cells = <2>; ++ #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; +@@ -35,15 +34,12 @@ Example: + qcom,ee = <0>; + }; + +-DMA clients must use the format descripted in the dma.txt file, using a three ++DMA clients must use the format descripted in the dma.txt file, using a two + cell specifier for each channel. + +-Each dmas request consists of 3 cells: ++Each dmas request consists of two cells: + 1. phandle pointing to the DMA controller + 2. channel number +- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. +- The CRCI is used for flow control. It identifies the peripheral device that +- is the source/destination for the transferred data. + + Example: + +@@ -55,7 +51,7 @@ Example: + + cs-gpios = <&qcom_pinmux 20 0>; + +- dmas = <&adm_dma 6 9>, +- <&adm_dma 5 10>; ++ dmas = <&adm_dma 6>, ++ <&adm_dma 5>; + dma-names = "rx", "tx"; + }; diff --git a/target/linux/ipq806x/patches-5.4/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-5.4/0002-dmaengine-Add-ADM-driver.patch new file mode 100644 index 0000000000..fedb8ed798 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0002-dmaengine-Add-ADM-driver.patch @@ -0,0 +1,966 @@ +From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen <twp@codeaurora.org> +Date: Mon, 16 May 2016 17:58:51 -0700 +Subject: [PATCH 02/69] dmaengine: Add ADM driver + +Original patch by Andy Gross. + +Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA +controller found in the MSM8x60 and IPQ/APQ8064 platforms. + +The ADM supports both memory to memory transactions and memory +to/from peripheral device transactions. The controller also provides flow +control capabilities for transactions to/from peripheral devices. + +The initial release of this driver supports slave transfers to/from peripherals +and also incorporates CRCI (client rate control interface) flow control. + +Signed-off-by: Andy Gross <agross@codeaurora.org> +Signed-off-by: Thomas Pedersen <twp@codeaurora.org> +--- + drivers/dma/qcom/Kconfig | 10 + + drivers/dma/qcom/Makefile | 1 + + drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 911 insertions(+) + create mode 100644 drivers/dma/qcom/qcom_adm.c + +--- a/drivers/dma/qcom/Kconfig ++++ b/drivers/dma/qcom/Kconfig +@@ -27,3 +27,13 @@ config QCOM_HIDMA + (user to kernel, kernel to kernel, etc.). It only supports + memcpy interface. The core is not intended for general + purpose slave DMA. ++ ++config QCOM_ADM ++ tristate "Qualcomm ADM support" ++ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) ++ select DMA_ENGINE ++ select DMA_VIRTUAL_CHANNELS ++ ---help--- ++ Enable support for the Qualcomm ADM DMA controller. This controller ++ provides DMA capabilities for both general purpose and on-chip ++ peripheral devices. +--- a/drivers/dma/qcom/Makefile ++++ b/drivers/dma/qcom/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg + hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o + obj-$(CONFIG_QCOM_HIDMA) += hdma.o + hdma-objs := hidma_ll.o hidma.o hidma_dbg.o ++obj-$(CONFIG_QCOM_ADM) += qcom_adm.o +--- /dev/null ++++ b/drivers/dma/qcom/qcom_adm.c +@@ -0,0 +1,914 @@ ++/* ++ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/io.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/dma-mapping.h> ++#include <linux/scatterlist.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++#include <linux/of_irq.h> ++#include <linux/of_dma.h> ++#include <linux/reset.h> ++#include <linux/clk.h> ++#include <linux/dmaengine.h> ++ ++#include "../dmaengine.h" ++#include "../virt-dma.h" ++ ++/* ADM registers - calculated from channel number and security domain */ ++#define ADM_CHAN_MULTI 0x4 ++#define ADM_CI_MULTI 0x4 ++#define ADM_CRCI_MULTI 0x4 ++#define ADM_EE_MULTI 0x800 ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee) ++#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee)) ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci)) ++#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan)) ++#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee)) ++#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI) ++#define ADM_GP_CTL 0x3d8 ++#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \ ++ ADM_EE_OFFS(ee)) ++ ++/* channel status */ ++#define ADM_CH_STATUS_VALID BIT(1) ++ ++/* channel result */ ++#define ADM_CH_RSLT_VALID BIT(31) ++#define ADM_CH_RSLT_ERR BIT(3) ++#define ADM_CH_RSLT_FLUSH BIT(2) ++#define ADM_CH_RSLT_TPD BIT(1) ++ ++/* channel conf */ ++#define ADM_CH_CONF_SHADOW_EN BIT(12) ++#define ADM_CH_CONF_MPU_DISABLE BIT(11) ++#define ADM_CH_CONF_PERM_MPU_CONF BIT(9) ++#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7) ++#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11)) ++ ++/* channel result conf */ ++#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1) ++#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0) ++ ++/* CRCI CTL */ ++#define ADM_CRCI_CTL_MUX_SEL BIT(18) ++#define ADM_CRCI_CTL_RST BIT(17) ++ ++/* CI configuration */ ++#define ADM_CI_RANGE_END(x) (x << 24) ++#define ADM_CI_RANGE_START(x) (x << 16) ++#define ADM_CI_BURST_4_WORDS BIT(2) ++#define ADM_CI_BURST_8_WORDS BIT(3) ++ ++/* GP CTL */ ++#define ADM_GP_CTL_LP_EN BIT(12) ++#define ADM_GP_CTL_LP_CNT(x) (x << 8) ++ ++/* Command pointer list entry */ ++#define ADM_CPLE_LP BIT(31) ++#define ADM_CPLE_CMD_PTR_LIST BIT(29) ++ ++/* Command list entry */ ++#define ADM_CMD_LC BIT(31) ++#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7) ++#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3) ++ ++#define ADM_CMD_TYPE_SINGLE 0x0 ++#define ADM_CMD_TYPE_BOX 0x3 ++ ++#define ADM_CRCI_MUX_SEL BIT(4) ++#define ADM_DESC_ALIGN 8 ++#define ADM_MAX_XFER (SZ_64K-1) ++#define ADM_MAX_ROWS (SZ_64K-1) ++#define ADM_MAX_CHANNELS 16 ++ ++struct adm_desc_hw_box { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 row_len; ++ u32 num_rows; ++ u32 row_offset; ++}; ++ ++struct adm_desc_hw_single { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 len; ++}; ++ ++struct adm_async_desc { ++ struct virt_dma_desc vd; ++ struct adm_device *adev; ++ ++ size_t length; ++ enum dma_transfer_direction dir; ++ dma_addr_t dma_addr; ++ size_t dma_len; ++ ++ void *cpl; ++ dma_addr_t cp_addr; ++ u32 crci; ++ u32 mux; ++ u32 blk_size; ++}; ++ ++struct adm_chan { ++ struct virt_dma_chan vc; ++ struct adm_device *adev; ++ ++ /* parsed from DT */ ++ u32 id; /* channel id */ ++ ++ struct adm_async_desc *curr_txd; ++ struct dma_slave_config slave; ++ struct list_head node; ++ ++ int error; ++ int initialized; ++}; ++ ++static inline struct adm_chan *to_adm_chan(struct dma_chan *common) ++{ ++ return container_of(common, struct adm_chan, vc.chan); ++} ++ ++struct adm_device { ++ void __iomem *regs; ++ struct device *dev; ++ struct dma_device common; ++ struct device_dma_parameters dma_parms; ++ struct adm_chan *channels; ++ ++ u32 ee; ++ ++ struct clk *core_clk; ++ struct clk *iface_clk; ++ ++ struct reset_control *clk_reset; ++ struct reset_control *c0_reset; ++ struct reset_control *c1_reset; ++ struct reset_control *c2_reset; ++ int irq; ++}; ++ ++/** ++ * adm_free_chan - Frees dma resources associated with the specific channel ++ * ++ * Free all allocated descriptors associated with this channel ++ * ++ */ ++static void adm_free_chan(struct dma_chan *chan) ++{ ++ /* free all queued descriptors */ ++ vchan_free_chan_resources(to_virt_chan(chan)); ++} ++ ++/** ++ * adm_get_blksize - Get block size from burst value ++ * ++ */ ++static int adm_get_blksize(unsigned int burst) ++{ ++ int ret; ++ ++ switch (burst) { ++ case 16: ++ case 32: ++ case 64: ++ case 128: ++ ret = ffs(burst>>4) - 1; ++ break; ++ case 192: ++ ret = 4; ++ break; ++ case 256: ++ ret = 5; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ return ret; ++} ++ ++/** ++ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @crci: CRCI value ++ * @burst: Burst size of transaction ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, u32 crci, u32 burst, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_box *box_desc = NULL; ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 rows, row_offset, crci_cmd; ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ crci_cmd = ADM_CMD_SRC_CRCI(crci); ++ row_offset = burst; ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ crci_cmd = ADM_CMD_DST_CRCI(crci); ++ row_offset = burst << 16; ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ while (remainder >= burst) { ++ box_desc = desc; ++ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd; ++ box_desc->row_offset = row_offset; ++ box_desc->src_addr = *src; ++ box_desc->dst_addr = *dst; ++ ++ rows = remainder / burst; ++ rows = min_t(u32, rows, ADM_MAX_ROWS); ++ box_desc->num_rows = rows << 16 | rows; ++ box_desc->row_len = burst << 16 | burst; ++ ++ *incr_addr += burst * rows; ++ remainder -= burst * rows; ++ desc += sizeof(*box_desc); ++ } ++ ++ /* if leftover bytes, do one single descriptor */ ++ if (remainder) { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd; ++ single_desc->len = remainder; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ desc += sizeof(*single_desc); ++ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ } else { ++ if (box_desc && sg_is_last(sg)) ++ box_desc->cmd |= ADM_CMD_LC; ++ } ++ ++ return desc; ++} ++ ++/** ++ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_non_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ do { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ single_desc->len = (remainder > ADM_MAX_XFER) ? ++ ADM_MAX_XFER : remainder; ++ ++ remainder -= single_desc->len; ++ *incr_addr += single_desc->len; ++ desc += sizeof(*single_desc); ++ } while (remainder); ++ ++ /* set last command if this is the end of the whole transaction */ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ ++ return desc; ++} ++ ++/** ++ * adm_prep_slave_sg - Prep slave sg transaction ++ * ++ * @chan: dma channel ++ * @sgl: scatter gather list ++ * @sg_len: length of sg ++ * @direction: DMA transfer direction ++ * @flags: DMA flags ++ * @context: transfer context (unused) ++ */ ++static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, ++ struct scatterlist *sgl, unsigned int sg_len, ++ enum dma_transfer_direction direction, unsigned long flags, ++ void *context) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ struct scatterlist *sg; ++ dma_addr_t cple_addr; ++ u32 i, burst; ++ u32 single_count = 0, box_count = 0, crci = 0; ++ void *desc; ++ u32 *cple; ++ int blk_size = 0; ++ ++ if (!is_slave_direction(direction)) { ++ dev_err(adev->dev, "invalid dma direction\n"); ++ return NULL; ++ } ++ ++ /* ++ * get burst value from slave configuration ++ */ ++ burst = (direction == DMA_MEM_TO_DEV) ? ++ achan->slave.dst_maxburst : ++ achan->slave.src_maxburst; ++ ++ /* if using flow control, validate burst and crci values */ ++ if (achan->slave.device_fc) { ++ ++ blk_size = adm_get_blksize(burst); ++ if (blk_size < 0) { ++ dev_err(adev->dev, "invalid burst value: %d\n", ++ burst); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ crci = achan->slave.slave_id & 0xf; ++ if (!crci || achan->slave.slave_id > 0x1f) { ++ dev_err(adev->dev, "invalid crci value\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ } ++ ++ /* iterate through sgs and compute allocation size of structures */ ++ for_each_sg(sgl, sg, sg_len, i) { ++ if (achan->slave.device_fc) { ++ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst, ++ ADM_MAX_ROWS); ++ if (sg_dma_len(sg) % burst) ++ single_count++; ++ } else { ++ single_count += DIV_ROUND_UP(sg_dma_len(sg), ++ ADM_MAX_XFER); ++ } ++ } ++ ++ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC); ++ if (!async_desc) ++ return ERR_PTR(-ENOMEM); ++ ++ if (crci) ++ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ? ++ ADM_CRCI_CTL_MUX_SEL : 0; ++ async_desc->crci = crci; ++ async_desc->blk_size = blk_size; ++ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) + ++ box_count * sizeof(struct adm_desc_hw_box) + ++ sizeof(*cple) + 2 * ADM_DESC_ALIGN; ++ ++ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC); ++ if (!async_desc->cpl) ++ goto free; ++ ++ async_desc->adev = adev; ++ ++ /* both command list entry and descriptors must be 8 byte aligned */ ++ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN); ++ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN); ++ ++ for_each_sg(sgl, sg, sg_len, i) { ++ async_desc->length += sg_dma_len(sg); ++ ++ if (achan->slave.device_fc) ++ desc = adm_process_fc_descriptors(achan, desc, sg, crci, ++ burst, direction); ++ else ++ desc = adm_process_non_fc_descriptors(achan, desc, sg, ++ direction); ++ } ++ ++ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl, ++ async_desc->dma_len, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(adev->dev, async_desc->dma_addr)) ++ goto free; ++ ++ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl); ++ ++ /* init cmd list */ ++ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ *cple = ADM_CPLE_LP; ++ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3; ++ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ ++ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags); ++ ++free: ++ kfree(async_desc); ++ return ERR_PTR(-ENOMEM); ++} ++ ++/** ++ * adm_terminate_all - terminate all transactions on a channel ++ * @achan: adm dma channel ++ * ++ * Dequeues and frees all transactions, aborts current transaction ++ * No callbacks are done ++ * ++ */ ++static int adm_terminate_all(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ unsigned long flags; ++ LIST_HEAD(head); ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ vchan_get_all_descriptors(&achan->vc, &head); ++ ++ /* send flush command to terminate current transaction */ ++ writel_relaxed(0x0, ++ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee)); ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ vchan_dma_desc_free_list(&achan->vc, &head); ++ ++ return 0; ++} ++ ++static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flag; ++ ++ spin_lock_irqsave(&achan->vc.lock, flag); ++ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config)); ++ spin_unlock_irqrestore(&achan->vc.lock, flag); ++ ++ return 0; ++} ++ ++/** ++ * adm_start_dma - start next transaction ++ * @achan - ADM dma channel ++ */ ++static void adm_start_dma(struct adm_chan *achan) ++{ ++ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ ++ lockdep_assert_held(&achan->vc.lock); ++ ++ if (!vd) ++ return; ++ ++ list_del(&vd->node); ++ ++ /* write next command list out to the CMD FIFO */ ++ async_desc = container_of(vd, struct adm_async_desc, vd); ++ achan->curr_txd = async_desc; ++ ++ /* reset channel error */ ++ achan->error = 0; ++ ++ if (!achan->initialized) { ++ /* enable interrupts */ ++ writel(ADM_CH_CONF_SHADOW_EN | ++ ADM_CH_CONF_PERM_MPU_CONF | ++ ADM_CH_CONF_MPU_DISABLE | ++ ADM_CH_CONF_SEC_DOMAIN(adev->ee), ++ adev->regs + ADM_CH_CONF(achan->id)); ++ ++ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN, ++ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ achan->initialized = 1; ++ } ++ ++ /* set the crci block size if this transaction requires CRCI */ ++ if (async_desc->crci) { ++ writel(async_desc->mux | async_desc->blk_size, ++ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee)); ++ } ++ ++ /* make sure IRQ enable doesn't get reordered */ ++ wmb(); ++ ++ /* write next command list out to the CMD FIFO */ ++ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3, ++ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee)); ++} ++ ++/** ++ * adm_dma_irq - irq handler for ADM controller ++ * @irq: IRQ of interrupt ++ * @data: callback data ++ * ++ * IRQ handler for the bam controller ++ */ ++static irqreturn_t adm_dma_irq(int irq, void *data) ++{ ++ struct adm_device *adev = data; ++ u32 srcs, i; ++ struct adm_async_desc *async_desc; ++ unsigned long flags; ++ ++ srcs = readl_relaxed(adev->regs + ++ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee)); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ struct adm_chan *achan = &adev->channels[i]; ++ u32 status, result; ++ ++ if (srcs & BIT(i)) { ++ status = readl_relaxed(adev->regs + ++ ADM_CH_STATUS_SD(i, adev->ee)); ++ ++ /* if no result present, skip */ ++ if (!(status & ADM_CH_STATUS_VALID)) ++ continue; ++ ++ result = readl_relaxed(adev->regs + ++ ADM_CH_RSLT(i, adev->ee)); ++ ++ /* no valid results, skip */ ++ if (!(result & ADM_CH_RSLT_VALID)) ++ continue; ++ ++ /* flag error if transaction was flushed or failed */ ++ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH)) ++ achan->error = 1; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ async_desc = achan->curr_txd; ++ ++ achan->curr_txd = NULL; ++ ++ if (async_desc) { ++ vchan_cookie_complete(&async_desc->vd); ++ ++ /* kick off next DMA */ ++ adm_start_dma(achan); ++ } ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ } ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/** ++ * adm_tx_status - returns status of transaction ++ * @chan: dma channel ++ * @cookie: transaction cookie ++ * @txstate: DMA transaction state ++ * ++ * Return status of dma transaction ++ */ ++static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie, ++ struct dma_tx_state *txstate) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct virt_dma_desc *vd; ++ enum dma_status ret; ++ unsigned long flags; ++ size_t residue = 0; ++ ++ ret = dma_cookie_status(chan, cookie, txstate); ++ if (ret == DMA_COMPLETE || !txstate) ++ return ret; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ vd = vchan_find_desc(&achan->vc, cookie); ++ if (vd) ++ residue = container_of(vd, struct adm_async_desc, vd)->length; ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ /* ++ * residue is either the full length if it is in the issued list, or 0 ++ * if it is in progress. We have no reliable way of determining ++ * anything inbetween ++ */ ++ dma_set_residue(txstate, residue); ++ ++ if (achan->error) ++ return DMA_ERROR; ++ ++ return ret; ++} ++ ++/** ++ * adm_issue_pending - starts pending transactions ++ * @chan: dma channel ++ * ++ * Issues all pending transactions and starts DMA ++ */ ++static void adm_issue_pending(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd) ++ adm_start_dma(achan); ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++} ++ ++/** ++ * adm_dma_free_desc - free descriptor memory ++ * @vd: virtual descriptor ++ * ++ */ ++static void adm_dma_free_desc(struct virt_dma_desc *vd) ++{ ++ struct adm_async_desc *async_desc = container_of(vd, ++ struct adm_async_desc, vd); ++ ++ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr, ++ async_desc->dma_len, DMA_TO_DEVICE); ++ kfree(async_desc->cpl); ++ kfree(async_desc); ++} ++ ++static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan, ++ u32 index) ++{ ++ achan->id = index; ++ achan->adev = adev; ++ ++ vchan_init(&achan->vc, &adev->common); ++ achan->vc.desc_free = adm_dma_free_desc; ++} ++ ++static int adm_dma_probe(struct platform_device *pdev) ++{ ++ struct adm_device *adev; ++ struct resource *iores; ++ int ret; ++ u32 i; ++ ++ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL); ++ if (!adev) ++ return -ENOMEM; ++ ++ adev->dev = &pdev->dev; ++ ++ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ adev->regs = devm_ioremap_resource(&pdev->dev, iores); ++ if (IS_ERR(adev->regs)) ++ return PTR_ERR(adev->regs); ++ ++ adev->irq = platform_get_irq(pdev, 0); ++ if (adev->irq < 0) ++ return adev->irq; ++ ++ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee); ++ if (ret) { ++ dev_err(adev->dev, "Execution environment unspecified\n"); ++ return ret; ++ } ++ ++ adev->core_clk = devm_clk_get(adev->dev, "core"); ++ if (IS_ERR(adev->core_clk)) ++ return PTR_ERR(adev->core_clk); ++ ++ ret = clk_prepare_enable(adev->core_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable core clock\n"); ++ return ret; ++ } ++ ++ adev->iface_clk = devm_clk_get(adev->dev, "iface"); ++ if (IS_ERR(adev->iface_clk)) { ++ ret = PTR_ERR(adev->iface_clk); ++ goto err_disable_core_clk; ++ } ++ ++ ret = clk_prepare_enable(adev->iface_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable iface clock\n"); ++ goto err_disable_core_clk; ++ } ++ ++ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk"); ++ if (IS_ERR(adev->clk_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 reset\n"); ++ ret = PTR_ERR(adev->clk_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0"); ++ if (IS_ERR(adev->c0_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C0 reset\n"); ++ ret = PTR_ERR(adev->c0_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1"); ++ if (IS_ERR(adev->c1_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C1 reset\n"); ++ ret = PTR_ERR(adev->c1_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2"); ++ if (IS_ERR(adev->c2_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C2 reset\n"); ++ ret = PTR_ERR(adev->c2_reset); ++ goto err_disable_clks; ++ } ++ ++ reset_control_assert(adev->clk_reset); ++ reset_control_assert(adev->c0_reset); ++ reset_control_assert(adev->c1_reset); ++ reset_control_assert(adev->c2_reset); ++ ++ reset_control_deassert(adev->clk_reset); ++ reset_control_deassert(adev->c0_reset); ++ reset_control_deassert(adev->c1_reset); ++ reset_control_deassert(adev->c2_reset); ++ ++ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS, ++ sizeof(*adev->channels), GFP_KERNEL); ++ ++ if (!adev->channels) { ++ ret = -ENOMEM; ++ goto err_disable_clks; ++ } ++ ++ /* allocate and initialize channels */ ++ INIT_LIST_HEAD(&adev->common.channels); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) ++ adm_channel_init(adev, &adev->channels[i], i); ++ ++ /* reset CRCIs */ ++ for (i = 0; i < 16; i++) ++ writel(ADM_CRCI_CTL_RST, adev->regs + ++ ADM_CRCI_CTL(i, adev->ee)); ++ ++ /* configure client interfaces */ ++ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0)); ++ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1)); ++ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2)); ++ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf), ++ adev->regs + ADM_GP_CTL); ++ ++ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq, ++ 0, "adm_dma", adev); ++ if (ret) ++ goto err_disable_clks; ++ ++ platform_set_drvdata(pdev, adev); ++ ++ adev->common.dev = adev->dev; ++ adev->common.dev->dma_parms = &adev->dma_parms; ++ ++ /* set capabilities */ ++ dma_cap_zero(adev->common.cap_mask); ++ dma_cap_set(DMA_SLAVE, adev->common.cap_mask); ++ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask); ++ ++ /* initialize dmaengine apis */ ++ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV); ++ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; ++ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.device_free_chan_resources = adm_free_chan; ++ adev->common.device_prep_slave_sg = adm_prep_slave_sg; ++ adev->common.device_issue_pending = adm_issue_pending; ++ adev->common.device_tx_status = adm_tx_status; ++ adev->common.device_terminate_all = adm_terminate_all; ++ adev->common.device_config = adm_slave_config; ++ ++ ret = dma_async_device_register(&adev->common); ++ if (ret) { ++ dev_err(adev->dev, "failed to register dma async device\n"); ++ goto err_disable_clks; ++ } ++ ++ ret = of_dma_controller_register(pdev->dev.of_node, ++ of_dma_xlate_by_chan_id, ++ &adev->common); ++ if (ret) ++ goto err_unregister_dma; ++ ++ return 0; ++ ++err_unregister_dma: ++ dma_async_device_unregister(&adev->common); ++err_disable_clks: ++ clk_disable_unprepare(adev->iface_clk); ++err_disable_core_clk: ++ clk_disable_unprepare(adev->core_clk); ++ ++ return ret; ++} ++ ++static int adm_dma_remove(struct platform_device *pdev) ++{ ++ struct adm_device *adev = platform_get_drvdata(pdev); ++ struct adm_chan *achan; ++ u32 i; ++ ++ of_dma_controller_free(pdev->dev.of_node); ++ dma_async_device_unregister(&adev->common); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ achan = &adev->channels[i]; ++ ++ /* mask IRQs for this channel/EE pair */ ++ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ adm_terminate_all(&adev->channels[i].vc.chan); ++ } ++ ++ devm_free_irq(adev->dev, adev->irq, adev); ++ ++ clk_disable_unprepare(adev->core_clk); ++ clk_disable_unprepare(adev->iface_clk); ++ ++ return 0; ++} ++ ++static const struct of_device_id adm_of_match[] = { ++ { .compatible = "qcom,adm", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, adm_of_match); ++ ++static struct platform_driver adm_dma_driver = { ++ .probe = adm_dma_probe, ++ .remove = adm_dma_remove, ++ .driver = { ++ .name = "adm-dma-engine", ++ .of_match_table = adm_of_match, ++ }, ++}; ++ ++module_platform_driver(adm_dma_driver); ++ ++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); ++MODULE_DESCRIPTION("QCOM ADM DMA engine driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-5.4/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-5.4/0030-clk-Disable-i2c-device-on-gsbi4.patch new file mode 100644 index 0000000000..b2a6afe0dd --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0030-clk-Disable-i2c-device-on-gsbi4.patch @@ -0,0 +1,40 @@ +From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 08:16:10 +0100 +Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4 + +This patch was not annotated and comes from the v4.4 tree. + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/clk/qcom/gcc-ipq806x.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = { + .parent_names = gcc_pxo_pll8, + .num_parents = 2, + .ops = &clk_rcg_ops, +- .flags = CLK_SET_PARENT_GATE, ++ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk + }, + .num_parents = 1, + .ops = &clk_branch_ops, +- .flags = CLK_SET_RATE_PARENT, ++ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = { + .hw.init = &(struct clk_init_data){ + .name = "gsbi1_h_clk", + .ops = &clk_branch_ops, ++ .flags = CLK_IGNORE_UNUSED, + }, + }, + }; diff --git a/target/linux/ipq806x/patches-5.4/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-5.4/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch new file mode 100644 index 0000000000..a7e95513fd --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch @@ -0,0 +1,282 @@ +From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Thu, 9 Mar 2017 08:18:08 +0100 +Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms + +On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is +used to store partition layout. This new parser can now be used to read +SMEM and use it to register an MTD layout according to its content. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org> +--- + drivers/mtd/Kconfig | 7 ++ + drivers/mtd/Makefile | 1 + + drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 236 insertions(+) + create mode 100644 drivers/mtd/qcom_smem_part.c + +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -193,6 +193,13 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_QCOM_SMEM_PARTS ++ tristate "QCOM SMEM partitioning support" ++ depends on QCOM_SMEM ++ help ++ This provides partitions parser for QCOM devices using SMEM ++ such as IPQ806x. ++ + comment "User Modules And Translation Layers" + + # +--- /dev/null ++++ b/drivers/mtd/qcom_smem_part.c +@@ -0,0 +1,235 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/device.h> ++#include <linux/slab.h> ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/spi/spi.h> ++#include <linux/module.h> ++ ++#include <linux/soc/qcom/smem.h> ++ ++/* Processor/host identifier for the application processor */ ++#define SMEM_HOST_APPS 0 ++ ++/* SMEM items index */ ++#define SMEM_AARM_PARTITION_TABLE 9 ++#define SMEM_BOOT_FLASH_TYPE 421 ++#define SMEM_BOOT_FLASH_BLOCK_SIZE 424 ++ ++/* SMEM Flash types */ ++#define SMEM_FLASH_NAND 2 ++#define SMEM_FLASH_SPI 6 ++ ++#define SMEM_PART_NAME_SZ 16 ++#define SMEM_PARTS_MAX 32 ++ ++struct smem_partition { ++ char name[SMEM_PART_NAME_SZ]; ++ __le32 start; ++ __le32 size; ++ __le32 attr; ++}; ++ ++struct smem_partition_table { ++ u8 magic[8]; ++ __le32 version; ++ __le32 len; ++ struct smem_partition parts[SMEM_PARTS_MAX]; ++}; ++ ++/* SMEM Magic values in partition table */ ++static const u8 SMEM_PTABLE_MAGIC[] = { ++ 0xaa, 0x73, 0xee, 0x55, ++ 0xdb, 0xbd, 0x5e, 0xe3, ++}; ++ ++static int qcom_smem_get_flash_blksz(u64 **smem_blksz) ++{ ++ size_t size; ++ ++ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE, ++ &size); ++ ++ if (IS_ERR(*smem_blksz)) { ++ pr_err("Unable to read flash blksz from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_blksz)) { ++ pr_err("Invalid flash blksz size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_type(u64 **smem_flash_type) ++{ ++ size_t size; ++ ++ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE, ++ &size); ++ ++ if (IS_ERR(*smem_flash_type)) { ++ pr_err("Unable to read flash type from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_flash_type)) { ++ pr_err("Invalid flash type size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts) ++{ ++ size_t size; ++ ++ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE, ++ &size); ++ ++ if (IS_ERR(*pparts)) { ++ pr_err("Unable to read partition table from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ return 0; ++} ++ ++static int of_dev_node_match(struct device *dev, void *data) ++{ ++ return dev->of_node == data; ++} ++ ++static bool is_spi_device(struct device_node *np) ++{ ++ struct device *dev; ++ ++ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match); ++ if (!dev) ++ return false; ++ ++ put_device(dev); ++ return true; ++} ++ ++static int parse_qcom_smem_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct smem_partition_table *smem_parts; ++ u64 *smem_flash_type, *smem_blksz; ++ struct mtd_partition *mtd_parts; ++ struct device_node *of_node = master->dev.of_node; ++ int i, ret; ++ ++ /* ++ * SMEM will only store the partition table of the boot device. ++ * If this is not the boot device, do not return any partition. ++ */ ++ ret = qcom_smem_get_flash_type(&smem_flash_type); ++ if (ret < 0) ++ return ret; ++ ++ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master)) ++ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node))) ++ return 0; ++ ++ /* ++ * Just for sanity purpose, make sure the block size in SMEM matches the ++ * block size of the MTD device ++ */ ++ ret = qcom_smem_get_flash_blksz(&smem_blksz); ++ if (ret < 0) ++ return ret; ++ ++ if (*smem_blksz != master->erasesize) { ++ pr_err("SMEM block size differs from MTD block size\n"); ++ return -EINVAL; ++ } ++ ++ /* Get partition pointer from SMEM */ ++ ret = qcom_smem_get_flash_partitions(&smem_parts); ++ if (ret < 0) ++ return ret; ++ ++ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic, ++ sizeof(SMEM_PTABLE_MAGIC))) { ++ pr_err("SMEM partition magic invalid\n"); ++ return -EINVAL; ++ } ++ ++ /* Allocate and populate the mtd structures */ ++ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts), ++ GFP_KERNEL); ++ if (!mtd_parts) ++ return -ENOMEM; ++ ++ for (i = 0; i < smem_parts->len; i++) { ++ struct smem_partition *s_part = &smem_parts->parts[i]; ++ struct mtd_partition *m_part = &mtd_parts[i]; ++ ++ m_part->name = s_part->name; ++ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); ++ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); ++ ++ /* ++ * The last SMEM partition may have its size marked as ++ * something like 0xffffffff, which means "until the end of the ++ * flash device". In this case, truncate it. ++ */ ++ if (m_part->offset + m_part->size > master->size) ++ m_part->size = master->size - m_part->offset; ++ } ++ ++ *pparts = mtd_parts; ++ ++ return smem_parts->len; ++} ++ ++static const struct of_device_id qcom_smem_of_match_table[] = { ++ { .compatible = "qcom,smem" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table); ++ ++static struct mtd_part_parser qcom_smem_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_qcom_smem_partitions, ++ .name = "qcom-smem", ++ .of_match_table = qcom_smem_of_match_table, ++}; ++ ++static int __init qcom_smem_parser_init(void) ++{ ++ register_mtd_parser(&qcom_smem_parser); ++ return 0; ++} ++ ++static void __exit qcom_smem_parser_exit(void) ++{ ++ deregister_mtd_parser(&qcom_smem_parser); ++} ++ ++module_init(qcom_smem_parser_init); ++module_exit(qcom_smem_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>"); ++MODULE_DESCRIPTION("Parsing code for SMEM based partition tables"); +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o + obj-y += parsers/ + + # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch new file mode 100644 index 0000000000..0de0878f86 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0032-phy-add-qcom-dwc3-phy.patch @@ -0,0 +1,614 @@ +From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001 +From: Andy Gross <agross@codeaurora.org> +Date: Thu, 9 Mar 2017 08:19:18 +0100 +Subject: [PATCH 32/69] phy: add qcom dwc3 phy + +Signed-off-by: Andy Gross <agross@codeaurora.org> +--- + +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig +@@ -65,3 +65,15 @@ config PHY_QCOM_USB_HSIC + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. ++ ++config PHY_QCOM_DWC3 ++ tristate "QCOM DWC3 USB PHY support" ++ depends on ARCH_QCOM ++ depends on HAS_IOMEM ++ depends on OF ++ select GENERIC_PHY ++ help ++ This option enables support for the Synopsis PHYs present inside the ++ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS ++ PHY controllers. ++ +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom- + obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o + obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o + obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o ++obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o +--- /dev/null ++++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c +@@ -0,0 +1,578 @@ ++/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++* This program is distributed in the hope that it will be useful, ++* but WITHOUT ANY WARRANTY; without even the implied warranty of ++* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++* GNU General Public License for more details. ++*/ ++ ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/phy/phy.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/regmap.h> ++#include <linux/mfd/syscon.h> ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define QSCRATCH_GENERAL_CFG (0x08) ++#define HSUSB_PHY_CTRL_REG (0x10) ++ ++/* PHY_CTRL_REG */ ++#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) ++#define HSUSB_CTRL_USB2_SUSPEND BIT(23) ++#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) ++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) ++#define HSUSB_CTRL_USE_CLKCORE BIT(18) ++#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) ++#define HSUSB_CTRL_COMMONONN BIT(11) ++#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) ++#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) ++#define HSUSB_CTRL_CLAMP_EN BIT(7) ++#define HSUSB_CTRL_RETENABLEN BIT(1) ++#define HSUSB_CTRL_POR BIT(0) ++ ++/* QSCRATCH_GENERAL_CFG */ ++#define HSUSB_GCFG_XHCI_REV BIT(2) ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define SSUSB_PHY_CTRL_REG (0x30) ++#define SSUSB_PHY_PARAM_CTRL_1 (0x34) ++#define SSUSB_PHY_PARAM_CTRL_2 (0x38) ++#define CR_PROTOCOL_DATA_IN_REG (0x3c) ++#define CR_PROTOCOL_DATA_OUT_REG (0x40) ++#define CR_PROTOCOL_CAP_ADDR_REG (0x44) ++#define CR_PROTOCOL_CAP_DATA_REG (0x48) ++#define CR_PROTOCOL_READ_REG (0x4c) ++#define CR_PROTOCOL_WRITE_REG (0x50) ++ ++/* PHY_CTRL_REG */ ++#define SSUSB_CTRL_REF_USE_PAD BIT(28) ++#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) ++#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) ++#define SSUSB_CTRL_SS_PHY_EN BIT(8) ++#define SSUSB_CTRL_SS_PHY_RESET BIT(7) ++ ++/* SSPHY control registers - Does this need 0x30? */ ++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane) ++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane) ++ ++/* SSPHY SoC version specific values */ ++#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ ++#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit ++ preemphasis */ ++#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */ ++ ++/* QSCRATCH PHY_PARAM_CTRL1 fields */ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u ++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u ++ ++#define PHY_PARAM_CTRL1_MASK \ ++ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ ++ PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ ++ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ ++ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ ++ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) ++#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ ++ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++/* RX OVRD IN HI bits */ ++#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) ++#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) ++#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) ++#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700 ++#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8 ++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) ++#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018 ++#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) ++#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003 ++ ++/* TX OVRD DRV LO register bits */ ++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F ++#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80 ++#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7 ++#define TX_OVRD_DRV_LO_EN BIT(14) ++ ++/* SS CAP register bits */ ++#define SS_CR_CAP_ADDR_REG BIT(0) ++#define SS_CR_CAP_DATA_REG BIT(0) ++#define SS_CR_READ_REG BIT(0) ++#define SS_CR_WRITE_REG BIT(0) ++ ++struct qcom_dwc3_usb_phy { ++ struct regmap *base; ++ struct device *dev; ++ struct clk *xo_clk; ++ struct clk *ref_clk; ++ u32 rx_eq; ++ u32 tx_deamp_3_5db; ++ u32 mpll; ++}; ++ ++struct qcom_dwc3_phy_drvdata { ++ struct phy_ops ops; ++ u32 clk_rate; ++}; ++ ++/** ++ * Write register and read back masked value to confirm it is written ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @offset - register offset. ++ * @mask - register bitmask specifying what should be updated ++ * @val - value to write. ++ */ ++static inline void qcom_dwc3_phy_write_readback( ++ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset, ++ const u32 mask, u32 val) ++{ ++ u32 write_val, tmp; ++ ++ tmp = regmap_read(phy_dwc3->base, offset, &tmp); ++ tmp &= ~mask; /* retain other bits */ ++ write_val = tmp | val; ++ ++ regmap_write(phy_dwc3->base, offset, write_val); ++ ++ /* Read back to see if val was written */ ++ regmap_read(phy_dwc3->base, offset, &tmp); ++ tmp &= mask; /* clear other bits */ ++ ++ if (tmp != val) ++ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", ++ val, offset); ++} ++ ++static int wait_for_latch(struct regmap *base, u32 addr) ++{ ++ u32 retry = 10, data; ++ ++ while (true) { ++ regmap_read(base, addr, &data); ++ if (!data) ++ break; ++ ++ if (--retry == 0) ++ return -ETIMEDOUT; ++ ++ usleep_range(10, 20); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Write SSPHY register ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to write. ++ * @val - value to write. ++ */ ++static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3, ++ u32 addr, u32 val) ++{ ++ int ret; ++ ++ regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, addr); ++ regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, val); ++ regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG, SS_CR_CAP_DATA_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG); ++ if (ret) ++ goto err_wait; ++ ++ regmap_write(phy_dwc3->base, CR_PROTOCOL_WRITE_REG, SS_CR_WRITE_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_WRITE_REG); ++ ++err_wait: ++ if (ret) ++ dev_err(phy_dwc3->dev, "timeout waiting for latch\n"); ++ return ret; ++} ++ ++/** ++ * Read SSPHY register. ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to read. ++ */ ++static int qcom_dwc3_ss_read_phycreg(struct regmap *base, u32 addr, u32 *val) ++{ ++ int ret; ++ ++ regmap_write(base, CR_PROTOCOL_DATA_IN_REG, addr); ++ regmap_write(base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(base, CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* ++ * Due to hardware bug, first read of SSPHY register might be ++ * incorrect. Hence as workaround, SW should perform SSPHY register ++ * read twice, but use only second read and ignore first read. ++ */ ++ regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG); ++ ++ ret = wait_for_latch(base, CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* throwaway read */ ++ regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, &ret); ++ ++ regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG); ++ ++ ret = wait_for_latch(base, CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, val); ++ ++err_wait: ++ return ret; ++} ++ ++static int qcom_dwc3_hs_phy_init(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 val; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* ++ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel ++ * enable clamping, and disable RETENTION (power-on default is ENABLED) ++ */ ++ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | ++ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | ++ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | ++ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | ++ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; ++ ++ /* use core clock if external reference is not present */ ++ if (!phy_dwc3->xo_clk) ++ val |= HSUSB_CTRL_USE_CLKCORE; ++ ++ regmap_write(phy_dwc3->base, HSUSB_PHY_CTRL_REG, val); ++ usleep_range(2000, 2200); ++ ++ /* Disable (bypass) VBUS and ID filters */ ++ regmap_write(phy_dwc3->base, QSCRATCH_GENERAL_CFG, HSUSB_GCFG_XHCI_REV); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_hs_phy_exit(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_ss_phy_init(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 data = 0; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* reset phy */ ++ regmap_read(phy_dwc3->base, SSUSB_PHY_CTRL_REG, &data); ++ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, ++ data | SSUSB_CTRL_SS_PHY_RESET); ++ usleep_range(2000, 2200); ++ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data); ++ ++ /* clear REF_PAD if we don't have XO clk */ ++ if (!phy_dwc3->xo_clk) ++ data &= ~SSUSB_CTRL_REF_USE_PAD; ++ else ++ data |= SSUSB_CTRL_REF_USE_PAD; ++ ++ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data); ++ ++ /* wait for ref clk to become stable, this can take up to 30ms */ ++ msleep(30); ++ ++ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; ++ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data); ++ ++ /* ++ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates ++ * in HS mode instead of SS mode. Workaround it by asserting ++ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data |= (1 << 7); ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~0xff0; ++ data |= 0x20; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Fix RX Equalization setting as follows ++ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~RX_OVRD_IN_HI_RX_EQ_EN; ++ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; ++ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; ++ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT; ++ data |= RX_OVRD_IN_HI_RX_EQ_OVRD; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Set EQ and TX launch amplitudes as follows ++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version ++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 ++ * LANE0.TX_OVRD_DRV_LO.EN set to 1. ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; ++ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT; ++ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; ++ data |= 0x6E; ++ data |= TX_OVRD_DRV_LO_EN; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll); ++ ++ /* ++ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows ++ * TX_FULL_SWING [26:20] amplitude to 110 ++ * TX_DEEMPH_6DB [19:14] to 32 ++ * TX_DEEMPH_3_5DB [13:8] set based on SoC version ++ * LOS_BIAS [7:3] to 9 ++ */ ++ regmap_read(phy_dwc3->base, SSUSB_PHY_PARAM_CTRL_1, &data); ++ ++ data &= ~PHY_PARAM_CTRL1_MASK; ++ ++ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | ++ PHY_PARAM_CTRL1_LOS_BIAS(0x9); ++ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, ++ PHY_PARAM_CTRL1_MASK, data); ++ ++err_phy_trans: ++ return ret; ++} ++ ++static int qcom_dwc3_ss_phy_exit(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ /* Sequence to put SSPHY in low power state: ++ * 1. Clear REF_PHY_EN in PHY_CTRL_REG ++ * 2. Clear REF_USE_PAD in PHY_CTRL_REG ++ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention ++ */ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_SS_PHY_EN, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_REF_USE_PAD, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_TEST_POWERDOWN, 0x0); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = { ++ .ops = { ++ .init = qcom_dwc3_hs_phy_init, ++ .exit = qcom_dwc3_hs_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 60000000, ++}; ++ ++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = { ++ .ops = { ++ .init = qcom_dwc3_ss_phy_init, ++ .exit = qcom_dwc3_ss_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 125000000, ++}; ++ ++static const struct of_device_id qcom_dwc3_phy_table[] = { ++ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata }, ++ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata }, ++ { /* Sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table); ++ ++static int qcom_dwc3_phy_probe(struct platform_device *pdev) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3; ++ struct phy_provider *phy_provider; ++ struct phy *generic_phy; ++ struct resource *res; ++ const struct of_device_id *match; ++ const struct qcom_dwc3_phy_drvdata *data; ++ struct device_node *np; ++ ++ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); ++ if (!phy_dwc3) ++ return -ENOMEM; ++ ++ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node); ++ data = match->data; ++ ++ phy_dwc3->dev = &pdev->dev; ++ ++ phy_dwc3->base = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap"); ++ if (IS_ERR_OR_NULL(phy_dwc3->base)) ++ return PTR_ERR_OR_ZERO(phy_dwc3->base) ? : -EINVAL; ++ ++ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); ++ if (IS_ERR(phy_dwc3->ref_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); ++ return PTR_ERR(phy_dwc3->ref_clk); ++ } ++ ++ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate); ++ ++ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); ++ if (IS_ERR(phy_dwc3->xo_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); ++ phy_dwc3->xo_clk = NULL; ++ } ++ ++ /* Parse device node to probe HSIO settings */ ++ np = of_node_get(pdev->dev.of_node); ++ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy", ++ strlen(match->compatible))) { ++ ++ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) || ++ of_property_read_u32(np, "tx_deamp_3_5db", ++ &phy_dwc3->tx_deamp_3_5db) || ++ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) { ++ ++ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n"); ++ ++ /* Default HSIO settings */ ++ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; ++ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; ++ phy_dwc3->mpll = SSPHY_MPLL_VALUE; ++ } ++ } ++ ++ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, ++ &data->ops); ++ ++ if (IS_ERR(generic_phy)) ++ return PTR_ERR(generic_phy); ++ ++ phy_set_drvdata(generic_phy, phy_dwc3); ++ platform_set_drvdata(pdev, phy_dwc3); ++ ++ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, ++ of_phy_simple_xlate); ++ ++ if (IS_ERR(phy_provider)) ++ return PTR_ERR(phy_provider); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_dwc3_phy_driver = { ++ .probe = qcom_dwc3_phy_probe, ++ .driver = { ++ .name = "qcom-dwc3-usb-phy", ++ .owner = THIS_MODULE, ++ .of_match_table = qcom_dwc3_phy_table, ++ }, ++}; ++ ++module_platform_driver(qcom_dwc3_phy_driver); ++ ++MODULE_ALIAS("platform:phy-qcom-dwc3"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); ++MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>"); ++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/target/linux/ipq806x/patches-5.4/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-5.4/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch new file mode 100644 index 0000000000..a6c7953aaa --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch @@ -0,0 +1,29 @@ +From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Tue, 21 Apr 2015 19:09:07 -0700 +Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is + enabled + +If multiple PCIe devices are present in the system, the kernel will +panic at boot time when trying to scan the PCI buses. This happens on +IPQ806x based platforms, which has 3 PCIe ports. + +Enabling this option allows the kernel to assign the pci-domains +according to the device-tree content. This allows multiple PCIe +controllers to coexist in the system. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + arch/arm/mach-qcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM + select ARM_AMBA + select PINCTRL + select QCOM_SCM if SMP ++ select PCI_DOMAINS if PCI + help + Support for Qualcomm's devicetree based systems. + diff --git a/target/linux/ipq806x/patches-5.4/0034-0001-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-5.4/0034-0001-ARM-Add-Krait-L2-register-accessor-functions.patch new file mode 100644 index 0000000000..68acbeeec2 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0001-ARM-Add-Krait-L2-register-accessor-functions.patch @@ -0,0 +1,115 @@ +From 36d68f64c411e09788687d5919886aadeb92adca Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:20 +0530 +Subject: [PATCH 01/12] ARM: Add Krait L2 register accessor functions + +Krait CPUs have a handful of L2 cache controller registers that +live behind a cp15 based indirection register. First you program +the indirection register (l2cpselr) to point the L2 'window' +register (l2cpdr) at what you want to read/write. Then you +read/write the 'window' register to do what you want. The +l2cpselr register is not banked per-cpu so we must lock around +accesses to it to prevent other CPUs from re-pointing l2cpdr +underneath us. + +Cc: Mark Rutland <mark.rutland@arm.com> +Cc: Russell King <linux@arm.linux.org.uk> +Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + arch/arm/common/Kconfig | 3 ++ + arch/arm/common/Makefile | 1 + + arch/arm/common/krait-l2-accessors.c | 48 +++++++++++++++++++++++ + arch/arm/include/asm/krait-l2-accessors.h | 9 +++++ + 4 files changed, 61 insertions(+) + create mode 100644 arch/arm/common/krait-l2-accessors.c + create mode 100644 arch/arm/include/asm/krait-l2-accessors.h + +--- a/arch/arm/common/Kconfig ++++ b/arch/arm/common/Kconfig +@@ -7,6 +7,9 @@ config DMABOUNCE + bool + select ZONE_DMA + ++config KRAIT_L2_ACCESSORS ++ bool ++ + config SHARP_LOCOMO + bool + +--- a/arch/arm/common/Makefile ++++ b/arch/arm/common/Makefile +@@ -7,6 +7,7 @@ obj-y += firmware.o + + obj-$(CONFIG_SA1111) += sa1111.o + obj-$(CONFIG_DMABOUNCE) += dmabounce.o ++obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o + obj-$(CONFIG_SHARP_LOCOMO) += locomo.o + obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o + obj-$(CONFIG_SHARP_SCOOP) += scoop.o +--- /dev/null ++++ b/arch/arm/common/krait-l2-accessors.c +@@ -0,0 +1,48 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/spinlock.h> ++#include <linux/export.h> ++ ++#include <asm/barrier.h> ++#include <asm/krait-l2-accessors.h> ++ ++static DEFINE_RAW_SPINLOCK(krait_l2_lock); ++ ++void krait_set_l2_indirect_reg(u32 addr, u32 val) ++{ ++ unsigned long flags; ++ ++ raw_spin_lock_irqsave(&krait_l2_lock, flags); ++ /* ++ * Select the L2 window by poking l2cpselr, then write to the window ++ * via l2cpdr. ++ */ ++ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); ++ isb(); ++ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val)); ++ isb(); ++ ++ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); ++} ++EXPORT_SYMBOL(krait_set_l2_indirect_reg); ++ ++u32 krait_get_l2_indirect_reg(u32 addr) ++{ ++ u32 val; ++ unsigned long flags; ++ ++ raw_spin_lock_irqsave(&krait_l2_lock, flags); ++ /* ++ * Select the L2 window by poking l2cpselr, then read from the window ++ * via l2cpdr. ++ */ ++ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); ++ isb(); ++ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val)); ++ ++ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); ++ ++ return val; ++} ++EXPORT_SYMBOL(krait_get_l2_indirect_reg); +--- /dev/null ++++ b/arch/arm/include/asm/krait-l2-accessors.h +@@ -0,0 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H ++#define __ASMARM_KRAIT_L2_ACCESSORS_H ++ ++extern void krait_set_l2_indirect_reg(u32 addr, u32 val); ++extern u32 krait_get_l2_indirect_reg(u32 addr); ++ ++#endif diff --git a/target/linux/ipq806x/patches-5.4/0034-0002-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-5.4/0034-0002-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch new file mode 100644 index 0000000000..d43d0c89b5 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0002-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch @@ -0,0 +1,324 @@ +From b3f2f10693aadeacf83ab5be03810941a4b77612 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:21 +0530 +Subject: [PATCH 02/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) + +HFPLLs are the main frequency source for Krait CPU clocks. Add +support for changing the rate of these PLLs. + +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-hfpll.c | 244 +++++++++++++++++++++++++++++++++++ + drivers/clk/qcom/clk-hfpll.h | 44 +++++++ + 3 files changed, 289 insertions(+) + create mode 100644 drivers/clk/qcom/clk-hfpll.c + create mode 100644 drivers/clk/qcom/clk-hfpll.h + +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o + clk-qcom-y += clk-regmap-divider.o + clk-qcom-y += clk-regmap-mux.o + clk-qcom-y += clk-regmap-mux-div.o ++clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o + +--- /dev/null ++++ b/drivers/clk/qcom/clk-hfpll.c +@@ -0,0 +1,244 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/kernel.h> ++#include <linux/export.h> ++#include <linux/regmap.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/clk-provider.h> ++#include <linux/spinlock.h> ++ ++#include "clk-regmap.h" ++#include "clk-hfpll.h" ++ ++#define PLL_OUTCTRL BIT(0) ++#define PLL_BYPASSNL BIT(1) ++#define PLL_RESET_N BIT(2) ++ ++/* Initialize a HFPLL at a given rate and enable it. */ ++static void __clk_hfpll_init_once(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ ++ if (likely(h->init_done)) ++ return; ++ ++ /* Configure PLL parameters for integer mode. */ ++ if (hd->config_val) ++ regmap_write(regmap, hd->config_reg, hd->config_val); ++ regmap_write(regmap, hd->m_reg, 0); ++ regmap_write(regmap, hd->n_reg, 1); ++ ++ if (hd->user_reg) { ++ u32 regval = hd->user_val; ++ unsigned long rate; ++ ++ rate = clk_hw_get_rate(hw); ++ ++ /* Pick the right VCO. */ ++ if (hd->user_vco_mask && rate > hd->low_vco_max_rate) ++ regval |= hd->user_vco_mask; ++ regmap_write(regmap, hd->user_reg, regval); ++ } ++ ++ if (hd->droop_reg) ++ regmap_write(regmap, hd->droop_reg, hd->droop_val); ++ ++ h->init_done = true; ++} ++ ++static void __clk_hfpll_enable(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 val; ++ ++ __clk_hfpll_init_once(hw); ++ ++ /* Disable PLL bypass mode. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL); ++ ++ /* ++ * H/W requires a 5us delay between disabling the bypass and ++ * de-asserting the reset. Delay 10us just to be safe. ++ */ ++ udelay(10); ++ ++ /* De-assert active-low PLL reset. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); ++ ++ /* Wait for PLL to lock. */ ++ if (hd->status_reg) { ++ do { ++ regmap_read(regmap, hd->status_reg, &val); ++ } while (!(val & BIT(hd->lock_bit))); ++ } else { ++ udelay(60); ++ } ++ ++ /* Enable PLL output. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); ++} ++ ++/* Enable an already-configured HFPLL. */ ++static int clk_hfpll_enable(struct clk_hw *hw) ++{ ++ unsigned long flags; ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ regmap_read(regmap, hd->mode_reg, &mode); ++ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL))) ++ __clk_hfpll_enable(hw); ++ spin_unlock_irqrestore(&h->lock, flags); ++ ++ return 0; ++} ++ ++static void __clk_hfpll_disable(struct clk_hfpll *h) ++{ ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ ++ /* ++ * Disable the PLL output, disable test mode, enable the bypass mode, ++ * and assert the reset. ++ */ ++ regmap_update_bits(regmap, hd->mode_reg, ++ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0); ++} ++ ++static void clk_hfpll_disable(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ __clk_hfpll_disable(h); ++ spin_unlock_irqrestore(&h->lock, flags); ++} ++ ++static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ unsigned long rrate; ++ ++ rate = clamp(rate, hd->min_rate, hd->max_rate); ++ ++ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate; ++ if (rrate > hd->max_rate) ++ rrate -= *parent_rate; ++ ++ return rrate; ++} ++ ++/* ++ * For optimization reasons, assumes no downstream clocks are actively using ++ * it. ++ */ ++static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ unsigned long flags; ++ u32 l_val, val; ++ bool enabled; ++ ++ l_val = rate / parent_rate; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ ++ enabled = __clk_is_enabled(hw->clk); ++ if (enabled) ++ __clk_hfpll_disable(h); ++ ++ /* Pick the right VCO. */ ++ if (hd->user_reg && hd->user_vco_mask) { ++ regmap_read(regmap, hd->user_reg, &val); ++ if (rate <= hd->low_vco_max_rate) ++ val &= ~hd->user_vco_mask; ++ else ++ val |= hd->user_vco_mask; ++ regmap_write(regmap, hd->user_reg, val); ++ } ++ ++ regmap_write(regmap, hd->l_reg, l_val); ++ ++ if (enabled) ++ __clk_hfpll_enable(hw); ++ ++ spin_unlock_irqrestore(&h->lock, flags); ++ ++ return 0; ++} ++ ++static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 l_val; ++ ++ regmap_read(regmap, hd->l_reg, &l_val); ++ ++ return l_val * parent_rate; ++} ++ ++static void clk_hfpll_init(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode, status; ++ ++ regmap_read(regmap, hd->mode_reg, &mode); ++ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) { ++ __clk_hfpll_init_once(hw); ++ return; ++ } ++ ++ if (hd->status_reg) { ++ regmap_read(regmap, hd->status_reg, &status); ++ if (!(status & BIT(hd->lock_bit))) { ++ WARN(1, "HFPLL %s is ON, but not locked!\n", ++ __clk_get_name(hw->clk)); ++ clk_hfpll_disable(hw); ++ __clk_hfpll_init_once(hw); ++ } ++ } ++} ++ ++static int hfpll_is_enabled(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode; ++ ++ regmap_read(regmap, hd->mode_reg, &mode); ++ mode &= 0x7; ++ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL); ++} ++ ++const struct clk_ops clk_ops_hfpll = { ++ .enable = clk_hfpll_enable, ++ .disable = clk_hfpll_disable, ++ .is_enabled = hfpll_is_enabled, ++ .round_rate = clk_hfpll_round_rate, ++ .set_rate = clk_hfpll_set_rate, ++ .recalc_rate = clk_hfpll_recalc_rate, ++ .init = clk_hfpll_init, ++}; ++EXPORT_SYMBOL_GPL(clk_ops_hfpll); +--- /dev/null ++++ b/drivers/clk/qcom/clk-hfpll.h +@@ -0,0 +1,44 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++#ifndef __QCOM_CLK_HFPLL_H__ ++#define __QCOM_CLK_HFPLL_H__ ++ ++#include <linux/clk-provider.h> ++#include <linux/spinlock.h> ++#include "clk-regmap.h" ++ ++struct hfpll_data { ++ u32 mode_reg; ++ u32 l_reg; ++ u32 m_reg; ++ u32 n_reg; ++ u32 user_reg; ++ u32 droop_reg; ++ u32 config_reg; ++ u32 status_reg; ++ u8 lock_bit; ++ ++ u32 droop_val; ++ u32 config_val; ++ u32 user_val; ++ u32 user_vco_mask; ++ unsigned long low_vco_max_rate; ++ ++ unsigned long min_rate; ++ unsigned long max_rate; ++}; ++ ++struct clk_hfpll { ++ struct hfpll_data const *d; ++ int init_done; ++ ++ struct clk_regmap clkr; ++ spinlock_t lock; ++}; ++ ++#define to_clk_hfpll(_hw) \ ++ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr) ++ ++extern const struct clk_ops clk_ops_hfpll; ++ ++#endif diff --git a/target/linux/ipq806x/patches-5.4/0034-0003-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-5.4/0034-0003-clk-qcom-Add-HFPLL-driver.patch new file mode 100644 index 0000000000..292eb66d67 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0003-clk-qcom-Add-HFPLL-driver.patch @@ -0,0 +1,142 @@ +From cb546b797a0da4dbb1a0c76a2a357921887b6189 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:22 +0530 +Subject: [PATCH 03/12] clk: qcom: Add HFPLL driver + +On some devices (MSM8974 for example), the HFPLLs are +instantiated within the Krait processor subsystem as separate +register regions. Add a driver for these PLLs so that we can +provide HFPLL clocks for use by the system. + +Cc: <devicetree@vger.kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/Kconfig | 8 ++++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/hfpll.c | 96 +++++++++++++++++++++++++++++++++++++++ + 3 files changed, 105 insertions(+) + create mode 100644 drivers/clk/qcom/hfpll.c + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV + Technologies, Inc. SPMI PMIC. It configures the frequency of + clkdiv outputs of the PMIC. These clocks are typically wired + through alternate functions on GPIO pins. ++ ++config QCOM_HFPLL ++ tristate "High-Frequency PLL (HFPLL) Clock Controller" ++ depends on COMMON_CLK_QCOM ++ help ++ Support for the high-frequency PLLs present on Qualcomm devices. ++ Say Y if you want to support CPU frequency scaling on devices ++ such as MSM8974, APQ8084, etc. +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-s + obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o + obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o + obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o ++obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +--- /dev/null ++++ b/drivers/clk/qcom/hfpll.c +@@ -0,0 +1,96 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/of.h> ++#include <linux/clk.h> ++#include <linux/clk-provider.h> ++#include <linux/regmap.h> ++ ++#include "clk-regmap.h" ++#include "clk-hfpll.h" ++ ++static const struct hfpll_data hdata = { ++ .mode_reg = 0x00, ++ .l_reg = 0x04, ++ .m_reg = 0x08, ++ .n_reg = 0x0c, ++ .user_reg = 0x10, ++ .config_reg = 0x14, ++ .config_val = 0x430405d, ++ .status_reg = 0x1c, ++ .lock_bit = 16, ++ ++ .user_val = 0x8, ++ .user_vco_mask = 0x100000, ++ .low_vco_max_rate = 1248000000, ++ .min_rate = 537600000UL, ++ .max_rate = 2900000000UL, ++}; ++ ++static const struct of_device_id qcom_hfpll_match_table[] = { ++ { .compatible = "qcom,hfpll" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); ++ ++static const struct regmap_config hfpll_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++ .max_register = 0x30, ++ .fast_io = true, ++}; ++ ++static int qcom_hfpll_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct device *dev = &pdev->dev; ++ void __iomem *base; ++ struct regmap *regmap; ++ struct clk_hfpll *h; ++ struct clk_init_data init = { ++ .parent_names = (const char *[]){ "xo" }, ++ .num_parents = 1, ++ .ops = &clk_ops_hfpll, ++ }; ++ ++ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); ++ if (!h) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); ++ if (IS_ERR(regmap)) ++ return PTR_ERR(regmap); ++ ++ if (of_property_read_string_index(dev->of_node, "clock-output-names", ++ 0, &init.name)) ++ return -ENODEV; ++ ++ h->d = &hdata; ++ h->clkr.hw.init = &init; ++ spin_lock_init(&h->lock); ++ ++ return devm_clk_register_regmap(&pdev->dev, &h->clkr); ++} ++ ++static struct platform_driver qcom_hfpll_driver = { ++ .probe = qcom_hfpll_probe, ++ .driver = { ++ .name = "qcom-hfpll", ++ .of_match_table = qcom_hfpll_match_table, ++ }, ++}; ++module_platform_driver(qcom_hfpll_driver); ++ ++MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-hfpll"); diff --git a/target/linux/ipq806x/patches-5.4/0034-0004-dt-bindings-clock-Document-qcom-hfpll.patch b/target/linux/ipq806x/patches-5.4/0034-0004-dt-bindings-clock-Document-qcom-hfpll.patch new file mode 100644 index 0000000000..1db989f6d9 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0004-dt-bindings-clock-Document-qcom-hfpll.patch @@ -0,0 +1,81 @@ +From 1f924faa8b1e4789ecc06ed0dd58ca3487c89012 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:23 +0530 +Subject: [PATCH 04/12] dt-bindings: clock: Document qcom,hfpll + +Adds bindings document for qcom,hfpll instantiated within +the Krait processor subsystem as separate register region. + +Reviewed-by: Rob Herring <robh@kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + .../devicetree/bindings/clock/qcom,hfpll.txt | 60 +++++++++++++++++++ + 1 file changed, 60 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt +@@ -0,0 +1,60 @@ ++High-Frequency PLL (HFPLL) ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: <string>: ++ shall contain only one of the following. The generic ++ compatible "qcom,hfpll" should be also included. ++ ++ "qcom,hfpll-ipq8064", "qcom,hfpll" ++ "qcom,hfpll-apq8064", "qcom,hfpll" ++ "qcom,hfpll-msm8974", "qcom,hfpll" ++ "qcom,hfpll-msm8960", "qcom,hfpll" ++ ++- reg: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: address and size of HPLL registers. An optional second ++ element specifies the address and size of the alias ++ register region. ++ ++- clocks: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: reference to the xo clock. ++ ++- clock-names: ++ Usage: required ++ Value type: <stringlist> ++ Definition: must be "xo". ++ ++- clock-output-names: ++ Usage: required ++ Value type: <string> ++ Definition: Name of the PLL. Typically hfpllX where X is a CPU number ++ starting at 0. Otherwise hfpll_Y where Y is more specific ++ such as "l2". ++ ++Example: ++ ++1) An HFPLL for the L2 cache. ++ ++ clock-controller@f9016000 { ++ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; ++ reg = <0xf9016000 0x30>; ++ clocks = <&xo_board>; ++ clock-names = "xo"; ++ clock-output-names = "hfpll_l2"; ++ }; ++ ++2) An HFPLL for CPU0. This HFPLL has the alias register region. ++ ++ clock-controller@f908a000 { ++ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; ++ reg = <0xf908a000 0x30>, <0xf900a000 0x30>; ++ clocks = <&xo_board>; ++ clock-names = "xo"; ++ clock-output-names = "hfpll0"; ++ }; diff --git a/target/linux/ipq806x/patches-5.4/0034-0005-clk-qcom-Add-MSM8960-APQ8064-s-HFPLLs.patch b/target/linux/ipq806x/patches-5.4/0034-0005-clk-qcom-Add-MSM8960-APQ8064-s-HFPLLs.patch new file mode 100644 index 0000000000..5ed5625f2e --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0005-clk-qcom-Add-MSM8960-APQ8064-s-HFPLLs.patch @@ -0,0 +1,236 @@ +From 72ad7207954dd622a662ba884dc6c30a820123f2 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:24 +0530 +Subject: [PATCH 05/12] clk: qcom: Add MSM8960/APQ8064's HFPLLs + +Describe the HFPLLs present on MSM8960 and APQ8064 devices. + +Acked-by: Rob Herring <robh@kernel.org> (bindings) +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/gcc-msm8960.c | 172 +++++++++++++++++++ + include/dt-bindings/clock/qcom,gcc-msm8960.h | 2 + + 2 files changed, 174 insertions(+) + +--- a/drivers/clk/qcom/gcc-msm8960.c ++++ b/drivers/clk/qcom/gcc-msm8960.c +@@ -30,6 +30,7 @@ + #include "clk-pll.h" + #include "clk-rcg.h" + #include "clk-branch.h" ++#include "clk-hfpll.h" + #include "reset.h" + + static struct clk_pll pll3 = { +@@ -86,6 +87,164 @@ static struct clk_regmap pll8_vote = { + }, + }; + ++static struct hfpll_data hfpll0_data = { ++ .mode_reg = 0x3200, ++ .l_reg = 0x3208, ++ .m_reg = 0x320c, ++ .n_reg = 0x3210, ++ .config_reg = 0x3204, ++ .status_reg = 0x321c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3214, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll0 = { ++ .d = &hfpll0_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll0", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), ++}; ++ ++static struct hfpll_data hfpll1_8064_data = { ++ .mode_reg = 0x3240, ++ .l_reg = 0x3248, ++ .m_reg = 0x324c, ++ .n_reg = 0x3250, ++ .config_reg = 0x3244, ++ .status_reg = 0x325c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3254, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct hfpll_data hfpll1_data = { ++ .mode_reg = 0x3300, ++ .l_reg = 0x3308, ++ .m_reg = 0x330c, ++ .n_reg = 0x3310, ++ .config_reg = 0x3304, ++ .status_reg = 0x331c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll1 = { ++ .d = &hfpll1_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll1", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), ++}; ++ ++static struct hfpll_data hfpll2_data = { ++ .mode_reg = 0x3280, ++ .l_reg = 0x3288, ++ .m_reg = 0x328c, ++ .n_reg = 0x3290, ++ .config_reg = 0x3284, ++ .status_reg = 0x329c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3294, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll2 = { ++ .d = &hfpll2_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll2", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll2.lock), ++}; ++ ++static struct hfpll_data hfpll3_data = { ++ .mode_reg = 0x32c0, ++ .l_reg = 0x32c8, ++ .m_reg = 0x32cc, ++ .n_reg = 0x32d0, ++ .config_reg = 0x32c4, ++ .status_reg = 0x32dc, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x32d4, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll3 = { ++ .d = &hfpll3_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll3", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll3.lock), ++}; ++ ++static struct hfpll_data hfpll_l2_8064_data = { ++ .mode_reg = 0x3300, ++ .l_reg = 0x3308, ++ .m_reg = 0x330c, ++ .n_reg = 0x3310, ++ .config_reg = 0x3304, ++ .status_reg = 0x331c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct hfpll_data hfpll_l2_data = { ++ .mode_reg = 0x3400, ++ .l_reg = 0x3408, ++ .m_reg = 0x340c, ++ .n_reg = 0x3410, ++ .config_reg = 0x3404, ++ .status_reg = 0x341c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3414, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll_l2 = { ++ .d = &hfpll_l2_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll_l2", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), ++}; ++ + static struct clk_pll pll14 = { + .l_reg = 0x31c4, + .m_reg = 0x31c8, +@@ -3107,6 +3266,9 @@ static struct clk_regmap *gcc_msm8960_cl + [PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr, + [PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr, + [RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr, ++ [PLL9] = &hfpll0.clkr, ++ [PLL10] = &hfpll1.clkr, ++ [PLL12] = &hfpll_l2.clkr, + }; + + static const struct qcom_reset_map gcc_msm8960_resets[] = { +@@ -3318,6 +3480,11 @@ static struct clk_regmap *gcc_apq8064_cl + [PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr, + [PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr, + [RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr, ++ [PLL9] = &hfpll0.clkr, ++ [PLL10] = &hfpll1.clkr, ++ [PLL12] = &hfpll_l2.clkr, ++ [PLL16] = &hfpll2.clkr, ++ [PLL17] = &hfpll3.clkr, + }; + + static const struct qcom_reset_map gcc_apq8064_resets[] = { +@@ -3477,6 +3644,11 @@ static int gcc_msm8960_probe(struct plat + if (ret) + return ret; + ++ if (match->data == &gcc_apq8064_desc) { ++ hfpll1.d = &hfpll1_8064_data; ++ hfpll_l2.d = &hfpll_l2_8064_data; ++ } ++ + tsens = platform_device_register_data(&pdev->dev, "qcom-tsens", -1, + NULL, 0); + if (IS_ERR(tsens)) +--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h ++++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h +@@ -319,5 +319,7 @@ + #define CE3_SRC 303 + #define CE3_CORE_CLK 304 + #define CE3_H_CLK 305 ++#define PLL16 306 ++#define PLL17 307 + + #endif diff --git a/target/linux/ipq806x/patches-5.4/0034-0006-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-5.4/0034-0006-clk-qcom-Add-IPQ806X-s-HFPLLs.patch new file mode 100644 index 0000000000..74c66178a8 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0006-clk-qcom-Add-IPQ806X-s-HFPLLs.patch @@ -0,0 +1,120 @@ +From 1f79131bfd512f322c16b58dca581ce39beafab9 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:25 +0530 +Subject: [PATCH 06/12] clk: qcom: Add IPQ806X's HFPLLs + +Describe the HFPLLs present on IPQ806X devices. + +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++ + 1 file changed, 82 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -30,6 +30,7 @@ + #include "clk-pll.h" + #include "clk-rcg.h" + #include "clk-branch.h" ++#include "clk-hfpll.h" + #include "reset.h" + + static struct clk_pll pll0 = { +@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = { + }, + }; + ++static struct hfpll_data hfpll0_data = { ++ .mode_reg = 0x3200, ++ .l_reg = 0x3208, ++ .m_reg = 0x320c, ++ .n_reg = 0x3210, ++ .config_reg = 0x3204, ++ .status_reg = 0x321c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3214, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll0 = { ++ .d = &hfpll0_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll0", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), ++}; ++ ++static struct hfpll_data hfpll1_data = { ++ .mode_reg = 0x3240, ++ .l_reg = 0x3248, ++ .m_reg = 0x324c, ++ .n_reg = 0x3250, ++ .config_reg = 0x3244, ++ .status_reg = 0x325c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll1 = { ++ .d = &hfpll1_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll1", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), ++}; ++ ++static struct hfpll_data hfpll_l2_data = { ++ .mode_reg = 0x3300, ++ .l_reg = 0x3308, ++ .m_reg = 0x330c, ++ .n_reg = 0x3310, ++ .config_reg = 0x3304, ++ .status_reg = 0x331c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll_l2 = { ++ .d = &hfpll_l2_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll_l2", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), ++}; ++ + static struct clk_pll pll14 = { + .l_reg = 0x31c4, + .m_reg = 0x31c8, +@@ -2798,6 +2877,9 @@ static struct clk_regmap *gcc_ipq806x_cl + [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr, + [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr, + [NSSTCM_CLK] = &nss_tcm_clk.clkr, ++ [PLL9] = &hfpll0.clkr, ++ [PLL10] = &hfpll1.clkr, ++ [PLL12] = &hfpll_l2.clkr, + }; + + static const struct qcom_reset_map gcc_ipq806x_resets[] = { diff --git a/target/linux/ipq806x/patches-5.4/0034-0007-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-5.4/0034-0007-clk-qcom-Add-support-for-Krait-clocks.patch new file mode 100644 index 0000000000..181b91f6eb --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0007-clk-qcom-Add-support-for-Krait-clocks.patch @@ -0,0 +1,213 @@ +From 4d7dc77babfef1d6cb8fd825e2f17dc3384c3272 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:26 +0530 +Subject: [PATCH 07/12] clk: qcom: Add support for Krait clocks + +The Krait clocks are made up of a series of muxes and a divider +that choose between a fixed rate clock and dedicated HFPLLs for +each CPU. Instead of using mmio accesses to remux parents, the +Krait implementation exposes the remux control via cp15 +registers. Support these clocks. + +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +[sboyd@kernel.org: Move hidden config to top outside of the visible qcom +config zone so that menuconfig looks nice] +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/Kconfig | 4 ++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-krait.c | 124 +++++++++++++++++++++++++++++++++++ + drivers/clk/qcom/clk-krait.h | 37 +++++++++++ + 4 files changed, 166 insertions(+) + create mode 100644 drivers/clk/qcom/clk-krait.c + create mode 100644 drivers/clk/qcom/clk-krait.h + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -1,3 +1,7 @@ ++config KRAIT_CLOCKS ++ bool ++ select KRAIT_L2_ACCESSORS ++ + config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o + clk-qcom-y += clk-regmap-divider.o + clk-qcom-y += clk-regmap-mux.o + clk-qcom-y += clk-regmap-mux-div.o ++clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o + clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o +--- /dev/null ++++ b/drivers/clk/qcom/clk-krait.c +@@ -0,0 +1,124 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/clk-provider.h> ++#include <linux/spinlock.h> ++ ++#include <asm/krait-l2-accessors.h> ++ ++#include "clk-krait.h" ++ ++/* Secondary and primary muxes share the same cp15 register */ ++static DEFINE_SPINLOCK(krait_clock_reg_lock); ++ ++#define LPL_SHIFT 8 ++static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) ++{ ++ unsigned long flags; ++ u32 regval; ++ ++ spin_lock_irqsave(&krait_clock_reg_lock, flags); ++ regval = krait_get_l2_indirect_reg(mux->offset); ++ regval &= ~(mux->mask << mux->shift); ++ regval |= (sel & mux->mask) << mux->shift; ++ if (mux->lpl) { ++ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); ++ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); ++ } ++ krait_set_l2_indirect_reg(mux->offset, regval); ++ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); ++ ++ /* Wait for switch to complete. */ ++ mb(); ++ udelay(1); ++} ++ ++static int krait_mux_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct krait_mux_clk *mux = to_krait_mux_clk(hw); ++ u32 sel; ++ ++ sel = clk_mux_reindex(index, mux->parent_map, 0); ++ mux->en_mask = sel; ++ /* Don't touch mux if CPU is off as it won't work */ ++ if (__clk_is_enabled(hw->clk)) ++ __krait_mux_set_sel(mux, sel); ++ ++ return 0; ++} ++ ++static u8 krait_mux_get_parent(struct clk_hw *hw) ++{ ++ struct krait_mux_clk *mux = to_krait_mux_clk(hw); ++ u32 sel; ++ ++ sel = krait_get_l2_indirect_reg(mux->offset); ++ sel >>= mux->shift; ++ sel &= mux->mask; ++ mux->en_mask = sel; ++ ++ return clk_mux_get_parent(hw, sel, mux->parent_map, 0); ++} ++ ++const struct clk_ops krait_mux_clk_ops = { ++ .set_parent = krait_mux_set_parent, ++ .get_parent = krait_mux_get_parent, ++ .determine_rate = __clk_mux_determine_rate_closest, ++}; ++EXPORT_SYMBOL_GPL(krait_mux_clk_ops); ++ ++/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ ++static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2); ++ return DIV_ROUND_UP(*parent_rate, 2); ++} ++ ++static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct krait_div2_clk *d = to_krait_div2_clk(hw); ++ unsigned long flags; ++ u32 val; ++ u32 mask = BIT(d->width) - 1; ++ ++ if (d->lpl) ++ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; ++ ++ spin_lock_irqsave(&krait_clock_reg_lock, flags); ++ val = krait_get_l2_indirect_reg(d->offset); ++ val &= ~mask; ++ krait_set_l2_indirect_reg(d->offset, val); ++ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); ++ ++ return 0; ++} ++ ++static unsigned long ++krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct krait_div2_clk *d = to_krait_div2_clk(hw); ++ u32 mask = BIT(d->width) - 1; ++ u32 div; ++ ++ div = krait_get_l2_indirect_reg(d->offset); ++ div >>= d->shift; ++ div &= mask; ++ div = (div + 1) * 2; ++ ++ return DIV_ROUND_UP(parent_rate, div); ++} ++ ++const struct clk_ops krait_div2_clk_ops = { ++ .round_rate = krait_div2_round_rate, ++ .set_rate = krait_div2_set_rate, ++ .recalc_rate = krait_div2_recalc_rate, ++}; ++EXPORT_SYMBOL_GPL(krait_div2_clk_ops); +--- /dev/null ++++ b/drivers/clk/qcom/clk-krait.h +@@ -0,0 +1,37 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++#ifndef __QCOM_CLK_KRAIT_H ++#define __QCOM_CLK_KRAIT_H ++ ++#include <linux/clk-provider.h> ++ ++struct krait_mux_clk { ++ unsigned int *parent_map; ++ u32 offset; ++ u32 mask; ++ u32 shift; ++ u32 en_mask; ++ bool lpl; ++ ++ struct clk_hw hw; ++ struct notifier_block clk_nb; ++}; ++ ++#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw) ++ ++extern const struct clk_ops krait_mux_clk_ops; ++ ++struct krait_div2_clk { ++ u32 offset; ++ u8 width; ++ u32 shift; ++ bool lpl; ++ ++ struct clk_hw hw; ++}; ++ ++#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) ++ ++extern const struct clk_ops krait_div2_clk_ops; ++ ++#endif diff --git a/target/linux/ipq806x/patches-5.4/0034-0008-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-5.4/0034-0008-clk-qcom-Add-KPSS-ACC-GCC-driver.patch new file mode 100644 index 0000000000..aa19ea2e3f --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0008-clk-qcom-Add-KPSS-ACC-GCC-driver.patch @@ -0,0 +1,134 @@ +From 3ddc3564d3c9f097986bd4ccbe34152413811335 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:27 +0530 +Subject: [PATCH 08/12] clk: qcom: Add KPSS ACC/GCC driver + +The ACC and GCC regions present in KPSSv1 contain registers to +control clocks and power to each Krait CPU and L2. For CPUfreq +purposes probe these devices and expose a mux clock that chooses +between PXO and PLL8. + +Cc: <devicetree@vger.kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/Kconfig | 8 ++++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/kpss-xcc.c | 87 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 96 insertions(+) + create mode 100644 drivers/clk/qcom/kpss-xcc.c + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -284,3 +284,11 @@ config QCOM_HFPLL + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. ++ ++config KPSS_XCC ++ tristate "KPSS Clock Controller" ++ depends on COMMON_CLK_QCOM ++ help ++ Support for the Krait ACC and GCC clock controllers. Say Y ++ if you want to support CPU frequency scaling on devices such ++ as MSM8960, APQ8064, etc. +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -45,4 +45,5 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-s + obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o + obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o + obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o ++obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +--- /dev/null ++++ b/drivers/clk/qcom/kpss-xcc.c +@@ -0,0 +1,87 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/clk-provider.h> ++ ++static const char *aux_parents[] = { ++ "pll8_vote", ++ "pxo", ++}; ++ ++static unsigned int aux_parent_map[] = { ++ 3, ++ 0, ++}; ++ ++static const struct of_device_id kpss_xcc_match_table[] = { ++ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL }, ++ { .compatible = "qcom,kpss-gcc" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); ++ ++static int kpss_xcc_driver_probe(struct platform_device *pdev) ++{ ++ const struct of_device_id *id; ++ struct clk *clk; ++ struct resource *res; ++ void __iomem *base; ++ const char *name; ++ ++ id = of_match_device(kpss_xcc_match_table, &pdev->dev); ++ if (!id) ++ return -ENODEV; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (id->data) { ++ if (of_property_read_string_index(pdev->dev.of_node, ++ "clock-output-names", ++ 0, &name)) ++ return -ENODEV; ++ base += 0x14; ++ } else { ++ name = "acpu_l2_aux"; ++ base += 0x28; ++ } ++ ++ clk = clk_register_mux_table(&pdev->dev, name, aux_parents, ++ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3, ++ 0, aux_parent_map, NULL); ++ ++ platform_set_drvdata(pdev, clk); ++ ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static int kpss_xcc_driver_remove(struct platform_device *pdev) ++{ ++ clk_unregister_mux(platform_get_drvdata(pdev)); ++ return 0; ++} ++ ++static struct platform_driver kpss_xcc_driver = { ++ .probe = kpss_xcc_driver_probe, ++ .remove = kpss_xcc_driver_remove, ++ .driver = { ++ .name = "kpss-xcc", ++ .of_match_table = kpss_xcc_match_table, ++ }, ++}; ++module_platform_driver(kpss_xcc_driver); ++ ++MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:kpss-xcc"); diff --git a/target/linux/ipq806x/patches-5.4/0034-0009-dt-bindings-arm-Document-qcom-kpss-gcc.patch b/target/linux/ipq806x/patches-5.4/0034-0009-dt-bindings-arm-Document-qcom-kpss-gcc.patch new file mode 100644 index 0000000000..6af40895bc --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0009-dt-bindings-arm-Document-qcom-kpss-gcc.patch @@ -0,0 +1,99 @@ +From 40e5ddf4f84869815129551f4a8cfc2c223ebeae Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:28 +0530 +Subject: [PATCH 09/12] dt-bindings: arm: Document qcom,kpss-gcc + +The ACC and GCC regions present in KPSSv1 contain registers to +control clocks and power to each Krait CPU and L2. Documenting +the bindings here. + +Reviewed-by: Rob Herring <robh@kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + .../bindings/arm/msm/qcom,kpss-acc.txt | 19 ++++++++ + .../bindings/arm/msm/qcom,kpss-gcc.txt | 44 +++++++++++++++++++ + 2 files changed, 63 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt + +--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt ++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt +@@ -21,10 +21,29 @@ PROPERTIES + the register region. An optional second element specifies + the base address and size of the alias register region. + ++- clocks: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: reference to the pll parents. ++ ++- clock-names: ++ Usage: required ++ Value type: <stringlist> ++ Definition: must be "pll8_vote", "pxo". ++ ++- clock-output-names: ++ Usage: optional ++ Value type: <string> ++ Definition: Name of the output clock. Typically acpuX_aux where X is a ++ CPU number starting at 0. ++ + Example: + + clock-controller@2088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x02088000 0x1000>, + <0x02008000 0x1000>; ++ clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; ++ clock-names = "pll8_vote", "pxo"; ++ clock-output-names = "acpu0_aux"; + }; +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt +@@ -0,0 +1,44 @@ ++Krait Processor Sub-system (KPSS) Global Clock Controller (GCC) ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: <string> ++ Definition: should be one of the following. The generic compatible ++ "qcom,kpss-gcc" should also be included. ++ "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc" ++ "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc" ++ "qcom,kpss-gcc-msm8974", "qcom,kpss-gcc" ++ "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc" ++ ++- reg: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: base address and size of the register region ++ ++- clocks: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: reference to the pll parents. ++ ++- clock-names: ++ Usage: required ++ Value type: <stringlist> ++ Definition: must be "pll8_vote", "pxo". ++ ++- clock-output-names: ++ Usage: required ++ Value type: <string> ++ Definition: Name of the output clock. Typically acpu_l2_aux indicating ++ an L2 cache auxiliary clock. ++ ++Example: ++ ++ l2cc: clock-controller@2011000 { ++ compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"; ++ reg = <0x2011000 0x1000>; ++ clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; ++ clock-names = "pll8_vote", "pxo"; ++ clock-output-names = "acpu_l2_aux"; ++ }; diff --git a/target/linux/ipq806x/patches-5.4/0034-0010-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-5.4/0034-0010-clk-qcom-Add-Krait-clock-controller-driver.patch new file mode 100644 index 0000000000..7ee1f50f41 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0010-clk-qcom-Add-Krait-clock-controller-driver.patch @@ -0,0 +1,409 @@ +From bb5c4a85051e5e0be39c775b6df85521f2ae807d Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:29 +0530 +Subject: [PATCH 10/12] clk: qcom: Add Krait clock controller driver + +The Krait CPU clocks are made up of a primary mux and secondary +mux for each CPU and the L2, controlled via cp15 accessors. For +Kraits within KPSSv1 each secondary mux accepts a different aux +source, but on KPSSv2 each secondary mux accepts the same aux +source. + +Cc: <devicetree@vger.kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/Kconfig | 8 + + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-krait.c | 4 +- + drivers/clk/qcom/krait-cc.c | 341 +++++++++++++++++++++++++++++++++++ + 4 files changed, 352 insertions(+), 2 deletions(-) + create mode 100644 drivers/clk/qcom/krait-cc.c + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -292,3 +292,11 @@ config KPSS_XCC + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. ++ ++config KRAITCC ++ tristate "Krait Clock Controller" ++ depends on COMMON_CLK_QCOM && ARM ++ select KRAIT_CLOCKS ++ help ++ Support for the Krait CPU clocks on Qualcomm devices. ++ Say Y if you want to support CPU frequency scaling. +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -47,3 +47,4 @@ obj-$(CONFIG_SDM_VIDEOCC_845) += videocc + obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o + obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o ++obj-$(CONFIG_KRAITCC) += krait-cc.o +--- a/drivers/clk/qcom/clk-krait.c ++++ b/drivers/clk/qcom/clk-krait.c +@@ -44,7 +44,7 @@ static int krait_mux_set_parent(struct c + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + u32 sel; + +- sel = clk_mux_reindex(index, mux->parent_map, 0); ++ sel = clk_mux_index_to_val(mux->parent_map, 0, index); + mux->en_mask = sel; + /* Don't touch mux if CPU is off as it won't work */ + if (__clk_is_enabled(hw->clk)) +@@ -63,7 +63,7 @@ static u8 krait_mux_get_parent(struct cl + sel &= mux->mask; + mux->en_mask = sel; + +- return clk_mux_get_parent(hw, sel, mux->parent_map, 0); ++ return clk_mux_val_to_index(hw, mux->parent_map, 0, sel); + } + + const struct clk_ops krait_mux_clk_ops = { +--- /dev/null ++++ b/drivers/clk/qcom/krait-cc.c +@@ -0,0 +1,341 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/clk-provider.h> ++#include <linux/slab.h> ++ ++#include "clk-krait.h" ++ ++static unsigned int sec_mux_map[] = { ++ 2, ++ 0, ++}; ++ ++static unsigned int pri_mux_map[] = { ++ 1, ++ 2, ++ 0, ++}; ++ ++static int ++krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) ++{ ++ struct krait_div2_clk *div; ++ struct clk_init_data init = { ++ .num_parents = 1, ++ .ops = &krait_div2_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ const char *p_names[1]; ++ struct clk *clk; ++ ++ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); ++ if (!div) ++ return -ENOMEM; ++ ++ div->width = 2; ++ div->shift = 6; ++ div->lpl = id >= 0; ++ div->offset = offset; ++ div->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ init.parent_names = p_names; ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ kfree(init.name); ++ return -ENOMEM; ++ } ++ ++ clk = devm_clk_register(dev, &div->hw); ++ kfree(p_names[0]); ++ kfree(init.name); ++ ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static int ++krait_add_sec_mux(struct device *dev, int id, const char *s, ++ unsigned int offset, bool unique_aux) ++{ ++ struct krait_mux_clk *mux; ++ static const char *sec_mux_list[] = { ++ "acpu_aux", ++ "qsb", ++ }; ++ struct clk_init_data init = { ++ .parent_names = sec_mux_list, ++ .num_parents = ARRAY_SIZE(sec_mux_list), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return -ENOMEM; ++ ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->mask = 0x3; ++ mux->shift = 2; ++ mux->parent_map = sec_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ if (unique_aux) { ++ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); ++ if (!sec_mux_list[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_aux; ++ } ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ if (unique_aux) ++ kfree(sec_mux_list[0]); ++err_aux: ++ kfree(init.name); ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static struct clk * ++krait_add_pri_mux(struct device *dev, int id, const char *s, ++ unsigned int offset) ++{ ++ struct krait_mux_clk *mux; ++ const char *p_names[3]; ++ struct clk_init_data init = { ++ .parent_names = p_names, ++ .num_parents = ARRAY_SIZE(p_names), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return ERR_PTR(-ENOMEM); ++ ++ mux->mask = 0x3; ++ mux->shift = 0; ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->parent_map = pri_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); ++ if (!init.name) ++ return ERR_PTR(-ENOMEM); ++ ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p0; ++ } ++ ++ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!p_names[1]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p1; ++ } ++ ++ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!p_names[2]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p2; ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ kfree(p_names[2]); ++err_p2: ++ kfree(p_names[1]); ++err_p1: ++ kfree(p_names[0]); ++err_p0: ++ kfree(init.name); ++ return clk; ++} ++ ++/* id < 0 for L2, otherwise id == physical CPU number */ ++static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) ++{ ++ int ret; ++ unsigned int offset; ++ void *p = NULL; ++ const char *s; ++ struct clk *clk; ++ ++ if (id >= 0) { ++ offset = 0x4501 + (0x1000 * id); ++ s = p = kasprintf(GFP_KERNEL, "%d", id); ++ if (!s) ++ return ERR_PTR(-ENOMEM); ++ } else { ++ offset = 0x500; ++ s = "_l2"; ++ } ++ ++ ret = krait_add_div(dev, id, s, offset); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ clk = krait_add_pri_mux(dev, id, s, offset); ++err: ++ kfree(p); ++ return clk; ++} ++ ++static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) ++{ ++ unsigned int idx = clkspec->args[0]; ++ struct clk **clks = data; ++ ++ if (idx >= 5) { ++ pr_err("%s: invalid clock index %d\n", __func__, idx); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ return clks[idx] ? : ERR_PTR(-ENODEV); ++} ++ ++static const struct of_device_id krait_cc_match_table[] = { ++ { .compatible = "qcom,krait-cc-v1", (void *)1UL }, ++ { .compatible = "qcom,krait-cc-v2" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, krait_cc_match_table); ++ ++static int krait_cc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *id; ++ unsigned long cur_rate, aux_rate; ++ int cpu; ++ struct clk *clk; ++ struct clk **clks; ++ struct clk *l2_pri_mux_clk; ++ ++ id = of_match_device(krait_cc_match_table, dev); ++ if (!id) ++ return -ENODEV; ++ ++ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ if (!id->data) { ++ clk = clk_register_fixed_factor(dev, "acpu_aux", ++ "gpll0_vote", 0, 1, 2); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ } ++ ++ /* Krait configurations have at most 4 CPUs and one L2 */ ++ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); ++ if (!clks) ++ return -ENOMEM; ++ ++ for_each_possible_cpu(cpu) { ++ clk = krait_add_clks(dev, cpu, id->data); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ clks[cpu] = clk; ++ } ++ ++ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); ++ if (IS_ERR(l2_pri_mux_clk)) ++ return PTR_ERR(l2_pri_mux_clk); ++ clks[4] = l2_pri_mux_clk; ++ ++ /* ++ * We don't want the CPU or L2 clocks to be turned off at late init ++ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the ++ * refcount of these clocks. Any cpufreq/hotplug manager can assume ++ * that the clocks have already been prepared and enabled by the time ++ * they take over. ++ */ ++ for_each_online_cpu(cpu) { ++ clk_prepare_enable(l2_pri_mux_clk); ++ WARN(clk_prepare_enable(clks[cpu]), ++ "Unable to turn on CPU%d clock", cpu); ++ } ++ ++ /* ++ * Force reinit of HFPLLs and muxes to overwrite any potential ++ * incorrect configuration of HFPLLs and muxes by the bootloader. ++ * While at it, also make sure the cores are running at known rates ++ * and print the current rate. ++ * ++ * The clocks are set to aux clock rate first to make sure the ++ * secondary mux is not sourcing off of QSB. The rate is then set to ++ * two different rates to force a HFPLL reinit under all ++ * circumstances. ++ */ ++ cur_rate = clk_get_rate(l2_pri_mux_clk); ++ aux_rate = 384000000; ++ if (cur_rate == 1) { ++ pr_info("L2 @ QSB rate. Forcing new rate.\n"); ++ cur_rate = aux_rate; ++ } ++ clk_set_rate(l2_pri_mux_clk, aux_rate); ++ clk_set_rate(l2_pri_mux_clk, 2); ++ clk_set_rate(l2_pri_mux_clk, cur_rate); ++ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); ++ for_each_possible_cpu(cpu) { ++ clk = clks[cpu]; ++ cur_rate = clk_get_rate(clk); ++ if (cur_rate == 1) { ++ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); ++ cur_rate = aux_rate; ++ } ++ ++ clk_set_rate(clk, aux_rate); ++ clk_set_rate(clk, 2); ++ clk_set_rate(clk, cur_rate); ++ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ } ++ ++ of_clk_add_provider(dev->of_node, krait_of_get, clks); ++ ++ return 0; ++} ++ ++static struct platform_driver krait_cc_driver = { ++ .probe = krait_cc_probe, ++ .driver = { ++ .name = "krait-cc", ++ .of_match_table = krait_cc_match_table, ++ }, ++}; ++module_platform_driver(krait_cc_driver); ++ ++MODULE_DESCRIPTION("Krait CPU Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:krait-cc"); diff --git a/target/linux/ipq806x/patches-5.4/0034-0011-dt-bindings-clock-Document-qcom-krait-cc.patch b/target/linux/ipq806x/patches-5.4/0034-0011-dt-bindings-clock-Document-qcom-krait-cc.patch new file mode 100644 index 0000000000..13e05c425a --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0011-dt-bindings-clock-Document-qcom-krait-cc.patch @@ -0,0 +1,55 @@ +From bf4503ccf321811192cb07f9711556237c3cf668 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:30 +0530 +Subject: [PATCH 11/12] dt-bindings: clock: Document qcom,krait-cc + +The Krait clock controller controls the krait CPU and the L2 clocks +consisting a primary mux and secondary mux. Add document for that. + +Reviewed-by: Rob Herring <robh@kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + .../bindings/clock/qcom,krait-cc.txt | 34 +++++++++++++++++++ + 1 file changed, 34 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt +@@ -0,0 +1,34 @@ ++Krait Clock Controller ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: <string> ++ Definition: must be one of: ++ "qcom,krait-cc-v1" ++ "qcom,krait-cc-v2" ++ ++- #clock-cells: ++ Usage: required ++ Value type: <u32> ++ Definition: must be 1 ++ ++- clocks: ++ Usage: required ++ Value type: <prop-encoded-array> ++ Definition: reference to the clock parents of hfpll, secondary muxes. ++ ++- clock-names: ++ Usage: required ++ Value type: <stringlist> ++ Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb". ++ ++Example: ++ ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>; ++ clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb"; ++ #clock-cells = <1>; ++ }; diff --git a/target/linux/ipq806x/patches-5.4/0034-0012-clk-qcom-Add-safe-switch-hook-for-krait-mux-clocks.patch b/target/linux/ipq806x/patches-5.4/0034-0012-clk-qcom-Add-safe-switch-hook-for-krait-mux-clocks.patch new file mode 100644 index 0000000000..847b4809a3 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0034-0012-clk-qcom-Add-safe-switch-hook-for-krait-mux-clocks.patch @@ -0,0 +1,152 @@ +From 77612720a2362230af726baa4149c40ec7a7fb05 Mon Sep 17 00:00:00 2001 +From: Sricharan R <sricharan@codeaurora.org> +Date: Tue, 14 Aug 2018 17:42:31 +0530 +Subject: [PATCH 12/12] clk: qcom: Add safe switch hook for krait mux clocks + +When the Hfplls are reprogrammed during the rate change, +the primary muxes which are sourced from the same hfpll +for higher frequencies, needs to be switched to the 'safe +secondary mux' as the parent for that small window. This +is done by registering a clk notifier for the muxes and +switching to the safe parent in the PRE_RATE_CHANGE notifier +and back to the original parent in the POST_RATE_CHANGE notifier. + +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +Tested-by: Craig Tatlor <ctatlor97@gmail.com> +Signed-off-by: Stephen Boyd <sboyd@kernel.org> +--- + drivers/clk/qcom/clk-krait.c | 2 ++ + drivers/clk/qcom/clk-krait.h | 3 ++ + drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++ + 3 files changed, 61 insertions(+) + +--- a/drivers/clk/qcom/clk-krait.c ++++ b/drivers/clk/qcom/clk-krait.c +@@ -50,6 +50,8 @@ static int krait_mux_set_parent(struct c + if (__clk_is_enabled(hw->clk)) + __krait_mux_set_sel(mux, sel); + ++ mux->reparent = true; ++ + return 0; + } + +--- a/drivers/clk/qcom/clk-krait.h ++++ b/drivers/clk/qcom/clk-krait.h +@@ -12,6 +12,9 @@ struct krait_mux_clk { + u32 shift; + u32 en_mask; + bool lpl; ++ u8 safe_sel; ++ u8 old_index; ++ bool reparent; + + struct clk_hw hw; + struct notifier_block clk_nb; +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -26,6 +26,49 @@ static unsigned int pri_mux_map[] = { + 0, + }; + ++/* ++ * Notifier function for switching the muxes to safe parent ++ * while the hfpll is getting reprogrammed. ++ */ ++static int krait_notifier_cb(struct notifier_block *nb, ++ unsigned long event, ++ void *data) ++{ ++ int ret = 0; ++ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk, ++ clk_nb); ++ /* Switch to safe parent */ ++ if (event == PRE_RATE_CHANGE) { ++ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw); ++ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel); ++ mux->reparent = false; ++ /* ++ * By the time POST_RATE_CHANGE notifier is called, ++ * clk framework itself would have changed the parent for the new rate. ++ * Only otherwise, put back to the old parent. ++ */ ++ } else if (event == POST_RATE_CHANGE) { ++ if (!mux->reparent) ++ ret = krait_mux_clk_ops.set_parent(&mux->hw, ++ mux->old_index); ++ } ++ ++ return notifier_from_errno(ret); ++} ++ ++static int krait_notifier_register(struct device *dev, struct clk *clk, ++ struct krait_mux_clk *mux) ++{ ++ int ret = 0; ++ ++ mux->clk_nb.notifier_call = krait_notifier_cb; ++ ret = clk_notifier_register(clk, &mux->clk_nb); ++ if (ret) ++ dev_err(dev, "failed to register clock notifier: %d\n", ret); ++ ++ return ret; ++} ++ + static int + krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + { +@@ -70,6 +113,7 @@ static int + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { ++ int ret; + struct krait_mux_clk *mux; + static const char *sec_mux_list[] = { + "acpu_aux", +@@ -93,6 +137,7 @@ krait_add_sec_mux(struct device *dev, in + mux->shift = 2; + mux->parent_map = sec_mux_map; + mux->hw.init = &init; ++ mux->safe_sel = 0; + + init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!init.name) +@@ -108,6 +153,11 @@ krait_add_sec_mux(struct device *dev, in + + clk = devm_clk_register(dev, &mux->hw); + ++ ret = krait_notifier_register(dev, clk, mux); ++ if (ret) ++ goto unique_aux; ++ ++unique_aux: + if (unique_aux) + kfree(sec_mux_list[0]); + err_aux: +@@ -119,6 +169,7 @@ static struct clk * + krait_add_pri_mux(struct device *dev, int id, const char *s, + unsigned int offset) + { ++ int ret; + struct krait_mux_clk *mux; + const char *p_names[3]; + struct clk_init_data init = { +@@ -139,6 +190,7 @@ krait_add_pri_mux(struct device *dev, in + mux->lpl = id >= 0; + mux->parent_map = pri_mux_map; + mux->hw.init = &init; ++ mux->safe_sel = 2; + + init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); + if (!init.name) +@@ -164,6 +216,10 @@ krait_add_pri_mux(struct device *dev, in + + clk = devm_clk_register(dev, &mux->hw); + ++ ret = krait_notifier_register(dev, clk, mux); ++ if (ret) ++ goto err_p3; ++err_p3: + kfree(p_names[2]); + err_p2: + kfree(p_names[1]); diff --git a/target/linux/ipq806x/patches-5.4/0035-qcom-cpufreq-nvmem-qcm-kyrp_make_Some_variables_static.patch b/target/linux/ipq806x/patches-5.4/0035-qcom-cpufreq-nvmem-qcm-kyrp_make_Some_variables_static.patch new file mode 100644 index 0000000000..a51153b2aa --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0035-qcom-cpufreq-nvmem-qcm-kyrp_make_Some_variables_static.patch @@ -0,0 +1,25 @@ +From 50c0b12f098fb3cfac7abcc0f2b5409f6bac5fa2 Mon Sep 17 00:00:00 2001 +From: Yangtao Li <tiny.windzz@gmail.com> +Date: Mon, 4 Feb 2019 01:13:10 -0500 +Subject: [PATCH] cpufreq: qcom-kryo: make some variables static + +The variables are local to the source and do not +need to be in global scope, so make them static. + +Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> +Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> +--- + drivers/cpufreq/qcom-cpufreq-kryo.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/cpufreq/qcom-cpufreq-kryo.c ++++ b/drivers/cpufreq/qcom-cpufreq-kryo.c +@@ -42,7 +42,7 @@ enum _msm8996_version { + NUM_OF_MSM8996_VERSIONS, + }; + +-struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; ++static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; + + static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void) + { diff --git a/target/linux/ipq806x/patches-5.4/0036-qcom-cpufreq-nvmem-Re-organise-kryo-cpufreq-driver.patch b/target/linux/ipq806x/patches-5.4/0036-qcom-cpufreq-nvmem-Re-organise-kryo-cpufreq-driver.patch new file mode 100644 index 0000000000..c7e4569616 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0036-qcom-cpufreq-nvmem-Re-organise-kryo-cpufreq-driver.patch @@ -0,0 +1,579 @@ +From 7d12709544b8b3fb9727a34a664b8380e1e3493a Mon Sep 17 00:00:00 2001 +From: Sricharan R <sricharan@codeaurora.org> +Date: Thu, 25 Jul 2019 12:41:31 +0200 +Subject: [PATCH] cpufreq: qcom: Re-organise kryo cpufreq to use it for other + nvmem based qcom socs + +The kryo cpufreq driver reads the nvmem cell and uses that data to +populate the opps. There are other qcom cpufreq socs like krait which +does similar thing. Except for the interpretation of the read data, +rest of the driver is same for both the cases. So pull the common things +out for reuse. + +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +[niklas.cassel@linaro.org: split dt-binding into a separate patch and +do not rename the compatible string. Update MAINTAINERS file.] +Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> +Reviewed-by: Ilia Lin <ilia.lin@kernel.org> +Reviewed-by: Stephen Boyd <sboyd@kernel.org> +Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> +--- + MAINTAINERS | 4 +- + drivers/cpufreq/Kconfig.arm | 4 +- + drivers/cpufreq/Makefile | 2 +- + ...om-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} | 122 +++++++++++------- + 4 files changed, 78 insertions(+), 54 deletions(-) + rename drivers/cpufreq/{qcom-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} (69%) + +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -110,8 +110,8 @@ config ARM_OMAP2PLUS_CPUFREQ + depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS + +-config ARM_QCOM_CPUFREQ_KRYO +- tristate "Qualcomm Kryo based CPUFreq" ++config ARM_QCOM_CPUFREQ_NVMEM ++ tristate "Qualcomm nvmem based CPUFreq" + depends on ARM64 + depends on QCOM_QFPROM + depends on QCOM_SMEM +--- a/drivers/cpufreq/Makefile ++++ b/drivers/cpufreq/Makefile +@@ -64,7 +64,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cp + obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o + obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o + obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +-obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o ++obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o + obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o + obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o + obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o +--- a/drivers/cpufreq/qcom-cpufreq-kryo.c ++++ /dev/null +@@ -1,249 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0 +-/* +- * Copyright (c) 2018, The Linux Foundation. All rights reserved. +- */ +- +-/* +- * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, +- * the CPU frequency subset and voltage value of each OPP varies +- * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables +- * defines the voltage and frequency value based on the msm-id in SMEM +- * and speedbin blown in the efuse combination. +- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC +- * to provide the OPP framework with required information. +- * This is used to determine the voltage and frequency value for each OPP of +- * operating-points-v2 table when it is parsed by the OPP framework. +- */ +- +-#include <linux/cpu.h> +-#include <linux/err.h> +-#include <linux/init.h> +-#include <linux/kernel.h> +-#include <linux/module.h> +-#include <linux/nvmem-consumer.h> +-#include <linux/of.h> +-#include <linux/platform_device.h> +-#include <linux/pm_opp.h> +-#include <linux/slab.h> +-#include <linux/soc/qcom/smem.h> +- +-#define MSM_ID_SMEM 137 +- +-enum _msm_id { +- MSM8996V3 = 0xF6ul, +- APQ8096V3 = 0x123ul, +- MSM8996SG = 0x131ul, +- APQ8096SG = 0x138ul, +-}; +- +-enum _msm8996_version { +- MSM8996_V3, +- MSM8996_SG, +- NUM_OF_MSM8996_VERSIONS, +-}; +- +-static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; +- +-static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void) +-{ +- size_t len; +- u32 *msm_id; +- enum _msm8996_version version; +- +- msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); +- if (IS_ERR(msm_id)) +- return NUM_OF_MSM8996_VERSIONS; +- +- /* The first 4 bytes are format, next to them is the actual msm-id */ +- msm_id++; +- +- switch ((enum _msm_id)*msm_id) { +- case MSM8996V3: +- case APQ8096V3: +- version = MSM8996_V3; +- break; +- case MSM8996SG: +- case APQ8096SG: +- version = MSM8996_SG; +- break; +- default: +- version = NUM_OF_MSM8996_VERSIONS; +- } +- +- return version; +-} +- +-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) +-{ +- struct opp_table **opp_tables; +- enum _msm8996_version msm8996_version; +- struct nvmem_cell *speedbin_nvmem; +- struct device_node *np; +- struct device *cpu_dev; +- unsigned cpu; +- u8 *speedbin; +- u32 versions; +- size_t len; +- int ret; +- +- cpu_dev = get_cpu_device(0); +- if (!cpu_dev) +- return -ENODEV; +- +- msm8996_version = qcom_cpufreq_kryo_get_msm_id(); +- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { +- dev_err(cpu_dev, "Not Snapdragon 820/821!"); +- return -ENODEV; +- } +- +- np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); +- if (!np) +- return -ENOENT; +- +- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); +- if (!ret) { +- of_node_put(np); +- return -ENOENT; +- } +- +- speedbin_nvmem = of_nvmem_cell_get(np, NULL); +- of_node_put(np); +- if (IS_ERR(speedbin_nvmem)) { +- if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) +- dev_err(cpu_dev, "Could not get nvmem cell: %ld\n", +- PTR_ERR(speedbin_nvmem)); +- return PTR_ERR(speedbin_nvmem); +- } +- +- speedbin = nvmem_cell_read(speedbin_nvmem, &len); +- nvmem_cell_put(speedbin_nvmem); +- if (IS_ERR(speedbin)) +- return PTR_ERR(speedbin); +- +- switch (msm8996_version) { +- case MSM8996_V3: +- versions = 1 << (unsigned int)(*speedbin); +- break; +- case MSM8996_SG: +- versions = 1 << ((unsigned int)(*speedbin) + 4); +- break; +- default: +- BUG(); +- break; +- } +- kfree(speedbin); +- +- opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL); +- if (!opp_tables) +- return -ENOMEM; +- +- for_each_possible_cpu(cpu) { +- cpu_dev = get_cpu_device(cpu); +- if (NULL == cpu_dev) { +- ret = -ENODEV; +- goto free_opp; +- } +- +- opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, +- &versions, 1); +- if (IS_ERR(opp_tables[cpu])) { +- ret = PTR_ERR(opp_tables[cpu]); +- dev_err(cpu_dev, "Failed to set supported hardware\n"); +- goto free_opp; +- } +- } +- +- cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, +- NULL, 0); +- if (!IS_ERR(cpufreq_dt_pdev)) { +- platform_set_drvdata(pdev, opp_tables); +- return 0; +- } +- +- ret = PTR_ERR(cpufreq_dt_pdev); +- dev_err(cpu_dev, "Failed to register platform device\n"); +- +-free_opp: +- for_each_possible_cpu(cpu) { +- if (IS_ERR_OR_NULL(opp_tables[cpu])) +- break; +- dev_pm_opp_put_supported_hw(opp_tables[cpu]); +- } +- kfree(opp_tables); +- +- return ret; +-} +- +-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev) +-{ +- struct opp_table **opp_tables = platform_get_drvdata(pdev); +- unsigned int cpu; +- +- platform_device_unregister(cpufreq_dt_pdev); +- +- for_each_possible_cpu(cpu) +- dev_pm_opp_put_supported_hw(opp_tables[cpu]); +- +- kfree(opp_tables); +- +- return 0; +-} +- +-static struct platform_driver qcom_cpufreq_kryo_driver = { +- .probe = qcom_cpufreq_kryo_probe, +- .remove = qcom_cpufreq_kryo_remove, +- .driver = { +- .name = "qcom-cpufreq-kryo", +- }, +-}; +- +-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = { +- { .compatible = "qcom,apq8096", }, +- { .compatible = "qcom,msm8996", }, +- {} +-}; +- +-/* +- * Since the driver depends on smem and nvmem drivers, which may +- * return EPROBE_DEFER, all the real activity is done in the probe, +- * which may be defered as well. The init here is only registering +- * the driver and the platform device. +- */ +-static int __init qcom_cpufreq_kryo_init(void) +-{ +- struct device_node *np = of_find_node_by_path("/"); +- const struct of_device_id *match; +- int ret; +- +- if (!np) +- return -ENODEV; +- +- match = of_match_node(qcom_cpufreq_kryo_match_list, np); +- of_node_put(np); +- if (!match) +- return -ENODEV; +- +- ret = platform_driver_register(&qcom_cpufreq_kryo_driver); +- if (unlikely(ret < 0)) +- return ret; +- +- kryo_cpufreq_pdev = platform_device_register_simple( +- "qcom-cpufreq-kryo", -1, NULL, 0); +- ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev); +- if (0 == ret) +- return 0; +- +- platform_driver_unregister(&qcom_cpufreq_kryo_driver); +- return ret; +-} +-module_init(qcom_cpufreq_kryo_init); +- +-static void __exit qcom_cpufreq_kryo_exit(void) +-{ +- platform_device_unregister(kryo_cpufreq_pdev); +- platform_driver_unregister(&qcom_cpufreq_kryo_driver); +-} +-module_exit(qcom_cpufreq_kryo_exit); +- +-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver"); +-MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -0,0 +1,273 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ */ ++ ++/* ++ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, ++ * the CPU frequency subset and voltage value of each OPP varies ++ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables ++ * defines the voltage and frequency value based on the msm-id in SMEM ++ * and speedbin blown in the efuse combination. ++ * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC ++ * to provide the OPP framework with required information. ++ * This is used to determine the voltage and frequency value for each OPP of ++ * operating-points-v2 table when it is parsed by the OPP framework. ++ */ ++ ++#include <linux/cpu.h> ++#include <linux/err.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/nvmem-consumer.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/platform_device.h> ++#include <linux/pm_opp.h> ++#include <linux/slab.h> ++#include <linux/soc/qcom/smem.h> ++ ++#define MSM_ID_SMEM 137 ++ ++enum _msm_id { ++ MSM8996V3 = 0xF6ul, ++ APQ8096V3 = 0x123ul, ++ MSM8996SG = 0x131ul, ++ APQ8096SG = 0x138ul, ++}; ++ ++enum _msm8996_version { ++ MSM8996_V3, ++ MSM8996_SG, ++ NUM_OF_MSM8996_VERSIONS, ++}; ++ ++static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; ++ ++static enum _msm8996_version qcom_cpufreq_get_msm_id(void) ++{ ++ size_t len; ++ u32 *msm_id; ++ enum _msm8996_version version; ++ ++ msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); ++ if (IS_ERR(msm_id)) ++ return NUM_OF_MSM8996_VERSIONS; ++ ++ /* The first 4 bytes are format, next to them is the actual msm-id */ ++ msm_id++; ++ ++ switch ((enum _msm_id)*msm_id) { ++ case MSM8996V3: ++ case APQ8096V3: ++ version = MSM8996_V3; ++ break; ++ case MSM8996SG: ++ case APQ8096SG: ++ version = MSM8996_SG; ++ break; ++ default: ++ version = NUM_OF_MSM8996_VERSIONS; ++ } ++ ++ return version; ++} ++ ++static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ u32 *versions) ++{ ++ size_t len; ++ u8 *speedbin; ++ enum _msm8996_version msm8996_version; ++ ++ msm8996_version = qcom_cpufreq_get_msm_id(); ++ if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { ++ dev_err(cpu_dev, "Not Snapdragon 820/821!"); ++ return -ENODEV; ++ } ++ ++ speedbin = nvmem_cell_read(speedbin_nvmem, &len); ++ if (IS_ERR(speedbin)) ++ return PTR_ERR(speedbin); ++ ++ switch (msm8996_version) { ++ case MSM8996_V3: ++ *versions = 1 << (unsigned int)(*speedbin); ++ break; ++ case MSM8996_SG: ++ *versions = 1 << ((unsigned int)(*speedbin) + 4); ++ break; ++ default: ++ BUG(); ++ break; ++ } ++ ++ kfree(speedbin); ++ return 0; ++} ++ ++static int qcom_cpufreq_probe(struct platform_device *pdev) ++{ ++ struct opp_table **opp_tables; ++ int (*get_version)(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ u32 *versions); ++ struct nvmem_cell *speedbin_nvmem; ++ struct device_node *np; ++ struct device *cpu_dev; ++ unsigned cpu; ++ u32 versions; ++ const struct of_device_id *match; ++ int ret; ++ ++ cpu_dev = get_cpu_device(0); ++ if (!cpu_dev) ++ return -ENODEV; ++ ++ match = pdev->dev.platform_data; ++ get_version = match->data; ++ if (!get_version) ++ return -ENODEV; ++ ++ np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); ++ if (!np) ++ return -ENOENT; ++ ++ ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); ++ if (!ret) { ++ of_node_put(np); ++ return -ENOENT; ++ } ++ ++ speedbin_nvmem = of_nvmem_cell_get(np, NULL); ++ of_node_put(np); ++ if (IS_ERR(speedbin_nvmem)) { ++ if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) ++ dev_err(cpu_dev, "Could not get nvmem cell: %ld\n", ++ PTR_ERR(speedbin_nvmem)); ++ return PTR_ERR(speedbin_nvmem); ++ } ++ ++ ret = get_version(cpu_dev, speedbin_nvmem, &versions); ++ nvmem_cell_put(speedbin_nvmem); ++ if (ret) ++ return ret; ++ ++ opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL); ++ if (!opp_tables) ++ return -ENOMEM; ++ ++ for_each_possible_cpu(cpu) { ++ cpu_dev = get_cpu_device(cpu); ++ if (NULL == cpu_dev) { ++ ret = -ENODEV; ++ goto free_opp; ++ } ++ ++ opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, ++ &versions, 1); ++ if (IS_ERR(opp_tables[cpu])) { ++ ret = PTR_ERR(opp_tables[cpu]); ++ dev_err(cpu_dev, "Failed to set supported hardware\n"); ++ goto free_opp; ++ } ++ } ++ ++ cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, ++ NULL, 0); ++ if (!IS_ERR(cpufreq_dt_pdev)) { ++ platform_set_drvdata(pdev, opp_tables); ++ return 0; ++ } ++ ++ ret = PTR_ERR(cpufreq_dt_pdev); ++ dev_err(cpu_dev, "Failed to register platform device\n"); ++ ++free_opp: ++ for_each_possible_cpu(cpu) { ++ if (IS_ERR_OR_NULL(opp_tables[cpu])) ++ break; ++ dev_pm_opp_put_supported_hw(opp_tables[cpu]); ++ } ++ kfree(opp_tables); ++ ++ return ret; ++} ++ ++static int qcom_cpufreq_remove(struct platform_device *pdev) ++{ ++ struct opp_table **opp_tables = platform_get_drvdata(pdev); ++ unsigned int cpu; ++ ++ platform_device_unregister(cpufreq_dt_pdev); ++ ++ for_each_possible_cpu(cpu) ++ dev_pm_opp_put_supported_hw(opp_tables[cpu]); ++ ++ kfree(opp_tables); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_cpufreq_driver = { ++ .probe = qcom_cpufreq_probe, ++ .remove = qcom_cpufreq_remove, ++ .driver = { ++ .name = "qcom-cpufreq-nvmem", ++ }, ++}; ++ ++static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { ++ { .compatible = "qcom,apq8096", ++ .data = qcom_cpufreq_kryo_name_version }, ++ { .compatible = "qcom,msm8996", ++ .data = qcom_cpufreq_kryo_name_version }, ++ {}, ++}; ++ ++/* ++ * Since the driver depends on smem and nvmem drivers, which may ++ * return EPROBE_DEFER, all the real activity is done in the probe, ++ * which may be defered as well. The init here is only registering ++ * the driver and the platform device. ++ */ ++static int __init qcom_cpufreq_init(void) ++{ ++ struct device_node *np = of_find_node_by_path("/"); ++ const struct of_device_id *match; ++ int ret; ++ ++ if (!np) ++ return -ENODEV; ++ ++ match = of_match_node(qcom_cpufreq_match_list, np); ++ of_node_put(np); ++ if (!match) ++ return -ENODEV; ++ ++ ret = platform_driver_register(&qcom_cpufreq_driver); ++ if (unlikely(ret < 0)) ++ return ret; ++ ++ cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem", ++ -1, match, sizeof(*match)); ++ ret = PTR_ERR_OR_ZERO(cpufreq_pdev); ++ if (0 == ret) ++ return 0; ++ ++ platform_driver_unregister(&qcom_cpufreq_driver); ++ return ret; ++} ++module_init(qcom_cpufreq_init); ++ ++static void __exit qcom_cpufreq_exit(void) ++{ ++ platform_device_unregister(cpufreq_pdev); ++ platform_driver_unregister(&qcom_cpufreq_driver); ++} ++module_exit(qcom_cpufreq_exit); ++ ++MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-5.4/0037-qcom-cpufreq-nvmem-Refactor-the-driver.patch b/target/linux/ipq806x/patches-5.4/0037-qcom-cpufreq-nvmem-Refactor-the-driver.patch new file mode 100644 index 0000000000..d00b2ccfcb --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0037-qcom-cpufreq-nvmem-Refactor-the-driver.patch @@ -0,0 +1,241 @@ +From 57f2f8b4aa0c6b41a284da82bfa40dc3b2abe9a5 Mon Sep 17 00:00:00 2001 +From: Niklas Cassel <niklas.cassel@linaro.org> +Date: Thu, 25 Jul 2019 12:41:33 +0200 +Subject: [PATCH] cpufreq: qcom: Refactor the driver to make it easier to + extend + +Refactor the driver to make it easier to extend in a later commit. + +Create a driver struct to collect all common resources, in order to make +it easier to free up all common resources. +Create a driver match_data struct to make it easier to extend the driver +with support for new features that might only be supported on certain SoCs. + +Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> +Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> +Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> +Reviewed-by: Ilia Lin <ilia.lin@kernel.org> +Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 123 +++++++++++++++++---------- + 1 file changed, 79 insertions(+), 44 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -43,6 +43,20 @@ enum _msm8996_version { + NUM_OF_MSM8996_VERSIONS, + }; + ++struct qcom_cpufreq_drv; ++ ++struct qcom_cpufreq_match_data { ++ int (*get_version)(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ struct qcom_cpufreq_drv *drv); ++}; ++ ++struct qcom_cpufreq_drv { ++ struct opp_table **opp_tables; ++ u32 versions; ++ const struct qcom_cpufreq_match_data *data; ++}; ++ + static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; + + static enum _msm8996_version qcom_cpufreq_get_msm_id(void) +@@ -76,7 +90,7 @@ static enum _msm8996_version qcom_cpufre + + static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, +- u32 *versions) ++ struct qcom_cpufreq_drv *drv) + { + size_t len; + u8 *speedbin; +@@ -94,10 +108,10 @@ static int qcom_cpufreq_kryo_name_versio + + switch (msm8996_version) { + case MSM8996_V3: +- *versions = 1 << (unsigned int)(*speedbin); ++ drv->versions = 1 << (unsigned int)(*speedbin); + break; + case MSM8996_SG: +- *versions = 1 << ((unsigned int)(*speedbin) + 4); ++ drv->versions = 1 << ((unsigned int)(*speedbin) + 4); + break; + default: + BUG(); +@@ -108,17 +122,17 @@ static int qcom_cpufreq_kryo_name_versio + return 0; + } + ++static const struct qcom_cpufreq_match_data match_data_kryo = { ++ .get_version = qcom_cpufreq_kryo_name_version, ++}; ++ + static int qcom_cpufreq_probe(struct platform_device *pdev) + { +- struct opp_table **opp_tables; +- int (*get_version)(struct device *cpu_dev, +- struct nvmem_cell *speedbin_nvmem, +- u32 *versions); ++ struct qcom_cpufreq_drv *drv; + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; + unsigned cpu; +- u32 versions; + const struct of_device_id *match; + int ret; + +@@ -126,11 +140,6 @@ static int qcom_cpufreq_probe(struct pla + if (!cpu_dev) + return -ENODEV; + +- match = pdev->dev.platform_data; +- get_version = match->data; +- if (!get_version) +- return -ENODEV; +- + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; +@@ -141,23 +150,43 @@ static int qcom_cpufreq_probe(struct pla + return -ENOENT; + } + +- speedbin_nvmem = of_nvmem_cell_get(np, NULL); +- of_node_put(np); +- if (IS_ERR(speedbin_nvmem)) { +- if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) +- dev_err(cpu_dev, "Could not get nvmem cell: %ld\n", +- PTR_ERR(speedbin_nvmem)); +- return PTR_ERR(speedbin_nvmem); ++ drv = kzalloc(sizeof(*drv), GFP_KERNEL); ++ if (!drv) ++ return -ENOMEM; ++ ++ match = pdev->dev.platform_data; ++ drv->data = match->data; ++ if (!drv->data) { ++ ret = -ENODEV; ++ goto free_drv; + } + +- ret = get_version(cpu_dev, speedbin_nvmem, &versions); +- nvmem_cell_put(speedbin_nvmem); +- if (ret) +- return ret; ++ if (drv->data->get_version) { ++ speedbin_nvmem = of_nvmem_cell_get(np, NULL); ++ if (IS_ERR(speedbin_nvmem)) { ++ if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) ++ dev_err(cpu_dev, ++ "Could not get nvmem cell: %ld\n", ++ PTR_ERR(speedbin_nvmem)); ++ ret = PTR_ERR(speedbin_nvmem); ++ goto free_drv; ++ } + +- opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL); +- if (!opp_tables) +- return -ENOMEM; ++ ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv); ++ if (ret) { ++ nvmem_cell_put(speedbin_nvmem); ++ goto free_drv; ++ } ++ nvmem_cell_put(speedbin_nvmem); ++ } ++ of_node_put(np); ++ ++ drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables), ++ GFP_KERNEL); ++ if (!drv->opp_tables) { ++ ret = -ENOMEM; ++ goto free_drv; ++ } + + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); +@@ -166,19 +195,23 @@ static int qcom_cpufreq_probe(struct pla + goto free_opp; + } + +- opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, +- &versions, 1); +- if (IS_ERR(opp_tables[cpu])) { +- ret = PTR_ERR(opp_tables[cpu]); +- dev_err(cpu_dev, "Failed to set supported hardware\n"); +- goto free_opp; ++ if (drv->data->get_version) { ++ drv->opp_tables[cpu] = ++ dev_pm_opp_set_supported_hw(cpu_dev, ++ &drv->versions, 1); ++ if (IS_ERR(drv->opp_tables[cpu])) { ++ ret = PTR_ERR(drv->opp_tables[cpu]); ++ dev_err(cpu_dev, ++ "Failed to set supported hardware\n"); ++ goto free_opp; ++ } + } + } + + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { +- platform_set_drvdata(pdev, opp_tables); ++ platform_set_drvdata(pdev, drv); + return 0; + } + +@@ -187,26 +220,30 @@ static int qcom_cpufreq_probe(struct pla + + free_opp: + for_each_possible_cpu(cpu) { +- if (IS_ERR_OR_NULL(opp_tables[cpu])) ++ if (IS_ERR_OR_NULL(drv->opp_tables[cpu])) + break; +- dev_pm_opp_put_supported_hw(opp_tables[cpu]); ++ dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); + } +- kfree(opp_tables); ++ kfree(drv->opp_tables); ++free_drv: ++ kfree(drv); + + return ret; + } + + static int qcom_cpufreq_remove(struct platform_device *pdev) + { +- struct opp_table **opp_tables = platform_get_drvdata(pdev); ++ struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev); + unsigned int cpu; + + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) +- dev_pm_opp_put_supported_hw(opp_tables[cpu]); ++ if (drv->opp_tables[cpu]) ++ dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); + +- kfree(opp_tables); ++ kfree(drv->opp_tables); ++ kfree(drv); + + return 0; + } +@@ -220,10 +257,8 @@ static struct platform_driver qcom_cpufr + }; + + static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { +- { .compatible = "qcom,apq8096", +- .data = qcom_cpufreq_kryo_name_version }, +- { .compatible = "qcom,msm8996", +- .data = qcom_cpufreq_kryo_name_version }, ++ { .compatible = "qcom,apq8096", .data = &match_data_kryo }, ++ { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + {}, + }; + diff --git a/target/linux/ipq806x/patches-5.4/0038-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch b/target/linux/ipq806x/patches-5.4/0038-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch new file mode 100644 index 0000000000..b8895231d8 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0038-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch @@ -0,0 +1,345 @@ +Subject: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs +Date: Tue, 14 Aug 2018 17:42:33 +0530 +Message-Id: <1534248753-2440-15-git-send-email-sricharan@codeaurora.org> +X-Mailer: git-send-email 1.9.1 +In-Reply-To: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org> +References: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org> +Sender: linux-kernel-owner@vger.kernel.org +Precedence: bulk +List-ID: <linux-kernel.vger.kernel.org> +X-Mailing-List: linux-kernel@vger.kernel.org + +In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974 +that has KRAIT processors the voltage/current value of each OPP +varies based on the silicon variant in use. + +The required OPP related data is determined based on +the efuse value. This is similar to the existing code for +kryo cores. So adding support for krait cores here. + +Signed-off-by: Sricharan R <sricharan@codeaurora.org> +--- + .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +- + drivers/cpufreq/Kconfig.arm | 2 +- + drivers/cpufreq/cpufreq-dt-platdev.c | 5 + + drivers/cpufreq/qcom-cpufreq-nvmem.c | 151 +++++++++++++++++++-- + 4 files changed, 149 insertions(+), 12 deletions(-) + +# diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +# index 6dcdfcd..7bc0f1a 100644 +# --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +# +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +# @@ -19,7 +19,8 @@ In 'cpus' nodes: + +# In 'operating-points-v2' table: +# - compatible: Should be +# - - 'operating-points-v2-qcom-cpu' for apq8096 and msm8996. +# + - 'operating-points-v2-qcom-cpu' for apq8096, msm8996, msm8974, +# + apq8064, msm8960 and ipq8074. +# - nvmem-cells: A phandle pointing to a nvmem-cells node representing the +# efuse registers that has information about the +# speedbin that is used to select the right frequency/voltage +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -112,7 +112,7 @@ config ARM_OMAP2PLUS_CPUFREQ + + config ARM_QCOM_CPUFREQ_NVMEM + tristate "Qualcomm nvmem based CPUFreq" +- depends on ARM64 ++ depends on ARCH_QCOM + depends on QCOM_QFPROM + depends on QCOM_SMEM + select PM_OPP +--- a/drivers/cpufreq/cpufreq-dt-platdev.c ++++ b/drivers/cpufreq/cpufreq-dt-platdev.c +@@ -128,6 +128,11 @@ static const struct of_device_id blackli + { .compatible = "ti,am43", }, + { .compatible = "ti,dra7", }, + ++ { .compatible = "qcom,ipq8064", }, ++ { .compatible = "qcom,apq8064", }, ++ { .compatible = "qcom,msm8974", }, ++ { .compatible = "qcom,msm8960", }, ++ + { } + }; + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -48,17 +48,92 @@ struct qcom_cpufreq_drv; + struct qcom_cpufreq_match_data { + int (*get_version)(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, + struct qcom_cpufreq_drv *drv); + }; + + struct qcom_cpufreq_drv { +- struct opp_table **opp_tables; ++ struct opp_table **opp_tables1; ++ struct opp_table **opp_tables2; + u32 versions; + const struct qcom_cpufreq_match_data *data; + }; + + static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; + ++static void get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver, ++ struct nvmem_cell *pvs_nvmem, u8 *buf) ++{ ++ u32 pte_efuse; ++ ++ pte_efuse = *((u32 *)buf); ++ ++ *speed = pte_efuse & 0xf; ++ if (*speed == 0xf) ++ *speed = (pte_efuse >> 4) & 0xf; ++ ++ if (*speed == 0xf) { ++ *speed = 0; ++ pr_warn("Speed bin: Defaulting to %d\n", *speed); ++ } else { ++ pr_info("Speed bin: %d\n", *speed); ++ } ++ ++ *pvs = (pte_efuse >> 10) & 0x7; ++ if (*pvs == 0x7) ++ *pvs = (pte_efuse >> 13) & 0x7; ++ ++ if (*pvs == 0x7) { ++ *pvs = 0; ++ pr_warn("PVS bin: Defaulting to %d\n", *pvs); ++ } else { ++ pr_info("PVS bin: %d\n", *pvs); ++ } ++} ++ ++static void get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver, ++ struct nvmem_cell *pvs_nvmem, u8 *buf) ++{ ++ u32 pte_efuse, redundant_sel; ++ ++ pte_efuse = *((u32 *)buf); ++ redundant_sel = (pte_efuse >> 24) & 0x7; ++ *speed = pte_efuse & 0x7; ++ ++ /* 4 bits of PVS are in efuse register bits 31, 8-6. */ ++ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); ++ *pvs_ver = (pte_efuse >> 4) & 0x3; ++ ++ switch (redundant_sel) { ++ case 1: ++ *speed = (pte_efuse >> 27) & 0xf; ++ break; ++ case 2: ++ *pvs = (pte_efuse >> 27) & 0xf; ++ break; ++ } ++ ++ /* Check SPEED_BIN_BLOW_STATUS */ ++ if (pte_efuse & BIT(3)) { ++ pr_info("Speed bin: %d\n", *speed); ++ } else { ++ pr_warn("Speed bin not set. Defaulting to 0!\n"); ++ *speed = 0; ++ } ++ ++ /* Check PVS_BLOW_STATUS */ ++ pte_efuse = *(((u32 *)buf) + 4); ++ pte_efuse &= BIT(21); ++ if (pte_efuse) { ++ pr_info("PVS bin: %d\n", *pvs); ++ } else { ++ pr_warn("PVS bin not set. Defaulting to 0!\n"); ++ *pvs = 0; ++ } ++ ++ pr_info("PVS version: %d\n", *pvs_ver); ++} ++ + static enum _msm8996_version qcom_cpufreq_get_msm_id(void) + { + size_t len; +@@ -90,11 +165,13 @@ static enum _msm8996_version qcom_cpufre + + static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, + struct qcom_cpufreq_drv *drv) + { + size_t len; + u8 *speedbin; + enum _msm8996_version msm8996_version; ++ *pvs_name = NULL; + + msm8996_version = qcom_cpufreq_get_msm_id(); + if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { +@@ -122,16 +199,51 @@ static int qcom_cpufreq_kryo_name_versio + return 0; + } + ++static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, ++ struct qcom_cpufreq_drv *drv) ++{ ++ int speed = 0, pvs = 0, pvs_ver = 0; ++ u8 *speedbin; ++ size_t len; ++ ++ speedbin = nvmem_cell_read(speedbin_nvmem, &len); ++ if (len == 4) { ++ get_krait_bin_format_a(&speed, &pvs, &pvs_ver, ++ speedbin_nvmem, speedbin); ++ } else if (len == 8) { ++ get_krait_bin_format_b(&speed, &pvs, &pvs_ver, ++ speedbin_nvmem, speedbin); ++ } else { ++ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); ++ return -ENODEV; ++ } ++ ++ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", ++ speed, pvs, pvs_ver); ++ ++ drv->versions = (1 << speed); ++ ++ kfree(speedbin); ++ return 0; ++} ++ + static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, + }; + ++static const struct qcom_cpufreq_match_data match_data_krait = { ++ .get_version = qcom_cpufreq_krait_name_version, ++}; ++ + static int qcom_cpufreq_probe(struct platform_device *pdev) + { + struct qcom_cpufreq_drv *drv; + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; ++ char *pvs_name = "speedXX-pvsXX-vXX"; + unsigned cpu; + const struct of_device_id *match; + int ret; +@@ -144,7 +256,7 @@ static int qcom_cpufreq_probe(struct pla + if (!np) + return -ENOENT; + +- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); ++ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu"); + if (!ret) { + of_node_put(np); + return -ENOENT; +@@ -172,7 +284,7 @@ static int qcom_cpufreq_probe(struct pla + goto free_drv; + } + +- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv); ++ ret = drv->data->get_version(cpu_dev, speedbin_nvmem, &pvs_name, drv); + if (ret) { + nvmem_cell_put(speedbin_nvmem); + goto free_drv; +@@ -181,12 +293,18 @@ static int qcom_cpufreq_probe(struct pla + } + of_node_put(np); + +- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables), ++ drv->opp_tables1 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables1), + GFP_KERNEL); +- if (!drv->opp_tables) { ++ if (!drv->opp_tables1) { + ret = -ENOMEM; + goto free_drv; + } ++ drv->opp_tables2 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables2), ++ GFP_KERNEL); ++ if (!drv->opp_tables2) { ++ ret = -ENOMEM; ++ goto free_opp1; ++ } + + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); +@@ -196,11 +314,22 @@ static int qcom_cpufreq_probe(struct pla + } + + if (drv->data->get_version) { +- drv->opp_tables[cpu] = +- dev_pm_opp_set_supported_hw(cpu_dev, ++ ++ if (pvs_name) { ++ drv->opp_tables1[cpu] = dev_pm_opp_set_prop_name(cpu_dev, ++ pvs_name); ++ if (IS_ERR(drv->opp_tables1[cpu])) { ++ ret = PTR_ERR(drv->opp_tables1[cpu]); ++ dev_err(cpu_dev, "Failed to add OPP name %s\n", ++ pvs_name); ++ goto free_opp; ++ } ++ } ++ ++ drv->opp_tables2[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, + &drv->versions, 1); +- if (IS_ERR(drv->opp_tables[cpu])) { +- ret = PTR_ERR(drv->opp_tables[cpu]); ++ if (IS_ERR(drv->opp_tables2[cpu])) { ++ ret = PTR_ERR(drv->opp_tables2[cpu]); + dev_err(cpu_dev, + "Failed to set supported hardware\n"); + goto free_opp; +@@ -220,11 +349,18 @@ static int qcom_cpufreq_probe(struct pla + + free_opp: + for_each_possible_cpu(cpu) { +- if (IS_ERR_OR_NULL(drv->opp_tables[cpu])) ++ if (IS_ERR_OR_NULL(drv->opp_tables1[cpu])) + break; +- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); ++ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]); + } +- kfree(drv->opp_tables); ++ for_each_possible_cpu(cpu) { ++ if (IS_ERR_OR_NULL(drv->opp_tables2[cpu])) ++ break; ++ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]); ++ } ++ kfree(drv->opp_tables2); ++free_opp1: ++ kfree(drv->opp_tables1); + free_drv: + kfree(drv); + +@@ -239,10 +375,14 @@ static int qcom_cpufreq_remove(struct pl + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) +- if (drv->opp_tables[cpu]) +- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); ++ if (drv->opp_tables1[cpu]) ++ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]); ++ for_each_possible_cpu(cpu) ++ if (drv->opp_tables2[cpu]) ++ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]); + +- kfree(drv->opp_tables); ++ kfree(drv->opp_tables1); ++ kfree(drv->opp_tables2); + kfree(drv); + + return 0; +@@ -259,6 +399,10 @@ static struct platform_driver qcom_cpufr + static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { + { .compatible = "qcom,apq8096", .data = &match_data_kryo }, + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, ++ { .compatible = "qcom,ipq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,apq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,msm8974", .data = &match_data_krait }, ++ { .compatible = "qcom,msm8960", .data = &match_data_krait }, + {}, + }; + diff --git a/target/linux/ipq806x/patches-5.4/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-5.4/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch new file mode 100644 index 0000000000..bb82251bfd --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch @@ -0,0 +1,153 @@ +From: Sylwester Nawrocki <s.nawrocki@samsung.com> +To: krzk@kernel.org, vireshk@kernel.org, robh+dt@kernel.org +Cc: sboyd@kernel.org, roger.lu@mediatek.com, + linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, + linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, + b.zolnierkie@samsung.com, m.szyprowski@samsung.com, + Stephen Boyd <sboyd@codeaurora.org>, + Sylwester Nawrocki <s.nawrocki@samsung.com> +Subject: [PATCH v5 1/4] PM / OPP: Support adjusting OPP voltages at runtime +Date: Wed, 16 Oct 2019 16:57:53 +0200 +Message-ID: <20191016145756.16004-2-s.nawrocki@samsung.com> (raw) +In-Reply-To: <20191016145756.16004-1-s.nawrocki@samsung.com> + +From: Stephen Boyd <sboyd@codeaurora.org> + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. Add an API to the OPP library for +the former case, so that AVS type devices can update the voltages +for an OPP when the hardware determines the voltage should +change. The assumption is that drivers like CPUfreq or devfreq +will register for the OPP notifiers and adjust the voltage +according to suggestions that AVS makes. + +This patch is derived from [1] submitted by Stephen. +[1] https://lore.kernel.org/patchwork/patch/599279/ + +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Signed-off-by: Roger Lu <roger.lu@mediatek.com> +[s.nawrocki@samsung.com: added handling of OPP min/max voltage] +Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> +--- + drivers/opp/core.c | 69 ++++++++++++++++++++++++++++++++++++++++++ + include/linux/pm_opp.h | 13 ++++++++ + 2 files changed, 82 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -1623,6 +1623,75 @@ put_table: + } + + /** ++ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP ++ * @dev: device for which we do this operation ++ * @freq: OPP frequency to adjust voltage of ++ * @u_volt: new OPP target voltage ++ * @u_volt_min: new OPP min voltage ++ * @u_volt_max: new OPP max voltage ++ * ++ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the ++ * copy operation, returns 0 if no modifcation was done OR modification was ++ * successful. ++ */ ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max) ++ ++{ ++ struct opp_table *opp_table; ++ struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); ++ int r = 0; ++ ++ /* Find the opp_table */ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ r = PTR_ERR(opp_table); ++ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); ++ return r; ++ } ++ ++ mutex_lock(&opp_table->lock); ++ ++ /* Do we have the frequency? */ ++ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { ++ if (tmp_opp->rate == freq) { ++ opp = tmp_opp; ++ break; ++ } ++ } ++ ++ if (IS_ERR(opp)) { ++ r = PTR_ERR(opp); ++ goto adjust_unlock; ++ } ++ ++ /* Is update really needed? */ ++ if (opp->supplies->u_volt == u_volt) ++ goto adjust_unlock; ++ ++ opp->supplies->u_volt = u_volt; ++ opp->supplies->u_volt_min = u_volt_min; ++ opp->supplies->u_volt_max = u_volt_max; ++ ++ dev_pm_opp_get(opp); ++ mutex_unlock(&opp_table->lock); ++ ++ /* Notify the voltage change of the OPP */ ++ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, ++ opp); ++ ++ dev_pm_opp_put(opp); ++ goto adjust_put_table; ++ ++adjust_unlock: ++ mutex_unlock(&opp_table->lock); ++adjust_put_table: ++ dev_pm_opp_put_opp_table(opp_table); ++ return r; ++} ++ ++/** + * dev_pm_opp_enable() - Enable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to enable +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -25,6 +25,7 @@ struct opp_table; + + enum dev_pm_opp_event { + OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, ++ OPP_EVENT_ADJUST_VOLTAGE, + }; + + /** +@@ -108,6 +109,10 @@ int dev_pm_opp_add(struct device *dev, u + unsigned long u_volt); + void dev_pm_opp_remove(struct device *dev, unsigned long freq); + ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max); ++ + int dev_pm_opp_enable(struct device *dev, unsigned long freq); + + int dev_pm_opp_disable(struct device *dev, unsigned long freq); +@@ -208,6 +213,14 @@ static inline void dev_pm_opp_remove(str + { + } + ++static inline int ++dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max) ++{ ++ return 0; ++} ++ + static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) + { + return 0; diff --git a/target/linux/ipq806x/patches-5.4/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-5.4/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch new file mode 100644 index 0000000000..4312db905a --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch @@ -0,0 +1,52 @@ +From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001 +From: Georgi Djakov <georgi.djakov@linaro.org> +Date: Thu, 12 May 2016 14:41:33 +0300 +Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for + device + +Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> +--- + drivers/opp/core.c | 21 +++++++++++++++++++++ + include/linux/pm_opp.h | 1 + + 2 files changed, 22 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -125,6 +125,27 @@ unsigned long dev_pm_opp_get_freq(struct + } + EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); + ++struct regulator *dev_pm_opp_get_regulator(struct device *dev) ++{ ++ struct opp_table *opp_table; ++ struct regulator *reg; ++ ++ rcu_read_lock(); ++ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ rcu_read_unlock(); ++ return ERR_CAST(opp_table); ++ } ++ ++ reg = opp_table->regulators[0]; ++ ++ rcu_read_unlock(); ++ ++ return reg; ++} ++EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator); ++ + /** + * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not + * @opp: opp for which turbo mode is being verified +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp + unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); + + unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); ++struct regulator *dev_pm_opp_get_regulator(struct device *dev); + + bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); + diff --git a/target/linux/ipq806x/patches-5.4/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-5.4/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch new file mode 100644 index 0000000000..8ba2369ddd --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch @@ -0,0 +1,47 @@ +From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov <georgi.djakov@linaro.org> +Date: Thu, 25 Aug 2016 18:43:35 +0300 +Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting + the OPP + +When the voltage is adjusted, the voltage tolerance is not updated. +This can lead to situations where the voltage min value is greater +than the voltage max value. The final result is triggering a BUG() +in the regulator core. +Fix this by updating the voltage tolerance values too. + +Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> +--- + drivers/opp/core.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -1663,6 +1663,7 @@ int dev_pm_opp_adjust_voltage(struct dev + struct opp_table *opp_table; + struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); + int r = 0; ++ unsigned long tol; + + /* Find the opp_table */ + opp_table = _find_opp_table(dev); +@@ -1692,8 +1693,17 @@ int dev_pm_opp_adjust_voltage(struct dev + goto adjust_unlock; + + opp->supplies->u_volt = u_volt; +- opp->supplies->u_volt_min = u_volt_min; +- opp->supplies->u_volt_max = u_volt_max; ++ ++ tol = u_volt * opp_table->voltage_tolerance_v1 / 100; ++ if ( u_volt_min == u_volt ) ++ opp->supplies->u_volt_min = u_volt - tol; ++ else ++ opp->supplies->u_volt_min = u_volt_min; ++ ++ if ( u_volt_max == u_volt ) ++ opp->supplies->u_volt_max = u_volt + tol; ++ else ++ opp->supplies->u_volt_max = u_volt_max; + + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); diff --git a/target/linux/ipq806x/patches-5.4/0053-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-5.4/0053-regulator-add-smb208-support.patch new file mode 100644 index 0000000000..0d2862c609 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0053-regulator-add-smb208-support.patch @@ -0,0 +1,55 @@ +From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001 +From: Adrian Panella <ianchi74@outlook.com> +Date: Thu, 9 Mar 2017 08:26:54 +0100 +Subject: [PATCH 53/69] regulator: add smb208 support + +Signed-off-by: Adrian Panella <ianchi74@outlook.com> +--- + Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ + drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ + 2 files changed, 13 insertions(+) + +--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt ++++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +@@ -61,6 +61,7 @@ Regulator nodes are identified by their + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + "qcom,rpm-pm8018-regulators" ++ "qcom,rpm-smb208-regulators" + + - vdd_l0_l1_lvs-supply: + - vdd_l2_l11_l12-supply: +@@ -171,6 +172,9 @@ pm8018: + s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, lvs1 + ++smb208: ++ s1a, s1b, s2a, s2b ++ + The content of each sub-node is defined by the standard binding for regulators - + see regulator.txt - with additional custom properties described below: + +--- a/drivers/regulator/qcom_rpm-regulator.c ++++ b/drivers/regulator/qcom_rpm-regulator.c +@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r + { } + }; + ++static const struct rpm_regulator_data rpm_smb208_regulators[] = { ++ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, ++ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, ++ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, ++ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, ++ { } ++}; ++ + static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-pm8018-regulators", + .data = &rpm_pm8018_regulators }, + { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, + { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, + { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, ++ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/target/linux/ipq806x/patches-5.4/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-5.4/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch new file mode 100644 index 0000000000..9620891194 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch @@ -0,0 +1,118 @@ +From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd <sboyd@codeaurora.org> +Date: Fri, 18 Sep 2015 17:52:08 -0700 +Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. + +In the former case, an AVS driver will call +dev_pm_opp_modify_voltage() and update the voltage for the +particular OPP the CPUs are using. Add an OPP notifier to +cpufreq-dt so that we can adjust the voltage of the CPU when AVS +updates the OPP. + +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +Acked-by: Viresh Kumar <viresh.kumar@linaro.org> +Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> +--- + drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 65 insertions(+), 3 deletions(-) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -32,6 +32,9 @@ struct private_data { + struct device *cpu_dev; + struct thermal_cooling_device *cdev; + const char *reg_name; ++ struct notifier_block opp_nb; ++ struct mutex lock; ++ unsigned long opp_freq; + bool have_static_opps; + }; + +@@ -47,12 +50,15 @@ static int set_target(struct cpufreq_pol + unsigned long freq = policy->freq_table[index].frequency; + int ret; + ++ mutex_lock(&priv->lock); + ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); + + if (!ret) { ++ priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + } ++ mutex_unlock(&priv->lock); + + return ret; + } +@@ -95,6 +101,39 @@ node_put: + return name; + } + ++static int opp_notifier(struct notifier_block *nb, unsigned long event, ++ void *data) ++{ ++ struct dev_pm_opp *opp = data; ++ struct private_data *priv = container_of(nb, struct private_data, ++ opp_nb); ++ struct device *cpu_dev = priv->cpu_dev; ++ struct regulator *cpu_reg; ++ unsigned long volt, freq; ++ int ret = 0; ++ ++ if (event == OPP_EVENT_ADJUST_VOLTAGE) { ++ cpu_reg = dev_pm_opp_get_regulator(cpu_dev); ++ if (IS_ERR(cpu_reg)) { ++ ret = PTR_ERR(cpu_reg); ++ goto out; ++ } ++ volt = dev_pm_opp_get_voltage(opp); ++ freq = dev_pm_opp_get_freq(opp); ++ ++ mutex_lock(&priv->lock); ++ if (freq == priv->opp_freq) { ++ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt); ++ } ++ mutex_unlock(&priv->lock); ++ if (ret) ++ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret); ++ } ++ ++out: ++ return notifier_from_errno(ret); ++} ++ + static int resources_available(void) + { + struct device *cpu_dev; +@@ -251,10 +290,14 @@ static int cpufreq_init(struct cpufreq_p + __func__, ret); + } + ++ mutex_init(&priv->lock); ++ priv->opp_nb.notifier_call = opp_notifier; ++ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb); ++ + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); +- goto out_free_opp; ++ goto out_unregister_nb; + } + + priv->cpu_dev = cpu_dev; +@@ -284,6 +327,8 @@ static int cpufreq_init(struct cpufreq_p + + out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); ++out_unregister_nb: ++ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb); + out_free_opp: + if (priv->have_static_opps) + dev_pm_opp_of_cpumask_remove_table(policy->cpus); diff --git a/target/linux/ipq806x/patches-5.4/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-5.4/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch new file mode 100644 index 0000000000..5f54120b3a --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch @@ -0,0 +1,161 @@ +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -48,16 +48,71 @@ static int set_target(struct cpufreq_pol + { + struct private_data *priv = policy->driver_data; + unsigned long freq = policy->freq_table[index].frequency; ++ struct clk *l2_clk = policy->l2_clk; ++ struct regulator *l2_regulator = policy->l2_regulator; ++ unsigned long l2_freq, target_l2_freq; ++ unsigned long l2_vol, target_l2_vol; ++ unsigned long target_freq; + int ret; + + mutex_lock(&priv->lock); + ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); + + if (!ret) { ++ if (policy->l2_rate_set) { ++ static unsigned long krait_l2[CONFIG_NR_CPUS] = { }; ++ int cpu, l2_index, tol = 0; ++ ++ target_freq = freq * 1000; ++ ++ krait_l2[policy->cpu] = target_freq; ++ for_each_present_cpu(cpu) ++ target_freq = max(target_freq, krait_l2[cpu]); ++ ++ for (l2_index = 2; l2_index >= 0; l2_index--) ++ if (target_freq >= policy->l2_cpufreq[l2_index]) ++ break; ++ ++ l2_freq = clk_get_rate(l2_clk); ++ target_l2_freq = policy->l2_rate[l2_index]; ++ ++ if (l2_freq != target_l2_freq) { ++ ++ /* ++ * Set to idle bin if switching from normal to high bin ++ * or vice versa ++ */ ++ if ( (l2_index == 2 && l2_freq == policy->l2_rate[1]) || ++ (l2_index == 1 && l2_freq == policy->l2_rate[2]) ) { ++ ret = clk_set_rate(l2_clk, policy->l2_rate[0]); ++ if (ret) ++ goto exit; ++ } ++ /* scale l2 with the core */ ++ ret = clk_set_rate(l2_clk, target_l2_freq); ++ if (ret) ++ goto exit; ++ ++ if (policy->l2_volt_set) { ++ ++ l2_vol = regulator_get_voltage(l2_regulator); ++ target_l2_vol = policy->l2_volt[l2_index]; ++ ++ if (l2_vol != target_l2_vol) { ++ tol = target_l2_vol * policy->l2_volt_tol / 100; ++ ret = regulator_set_voltage_tol(l2_regulator,target_l2_vol,tol); ++ if (ret) ++ goto exit; ++ } ++ } ++ } ++ } + priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + } ++ ++exit: + mutex_unlock(&priv->lock); + + return ret; +@@ -200,6 +255,9 @@ static int cpufreq_init(struct cpufreq_p + bool fallback = false; + const char *name; + int ret; ++ struct device_node *np, *l2_np; ++ struct clk *l2_clk = NULL; ++ struct regulator *l2_regulator = NULL; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { +@@ -307,6 +365,57 @@ static int cpufreq_init(struct cpufreq_p + + policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; + ++ policy->l2_rate_set = false; ++ policy->l2_volt_set = false; ++ ++ l2_clk = clk_get(cpu_dev, "l2"); ++ if (!IS_ERR(l2_clk)) ++ policy->l2_clk = l2_clk; ++ ++ l2_np = of_find_node_by_name(NULL, "qcom,l2"); ++ if (l2_np) { ++ struct device_node *vdd; ++ np = of_node_get(priv->cpu_dev->of_node); ++ ++ if (np) ++ of_property_read_u32(np, "voltage-tolerance", &policy->l2_volt_tol); ++ ++ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3); ++ if (policy->l2_rate[0] && policy->l2_rate[1] && policy->l2_rate[2]) { ++ policy->l2_rate_set = true; ++ of_property_read_u32_array(l2_np, "qcom,l2-cpufreq", policy->l2_cpufreq, 3); ++ of_property_read_u32_array(l2_np, "qcom,l2-volt", policy->l2_volt, 3); ++ } else ++ pr_warn("L2: failed to parse L2 rates\n"); ++ ++ if (!policy->l2_cpufreq[0] && !policy->l2_cpufreq[1] && ++ !policy->l2_cpufreq[2] && policy->l2_rate_set) { ++ int i; ++ ++ pr_warn("L2: failed to parse target cpu freq, using defaults\n"); ++ for (i = 0; i < 3; i++) ++ policy->l2_cpufreq[i] = policy->l2_rate[i]; ++ } ++ ++ if (policy->l2_volt[0] && policy->l2_volt[1] && policy->l2_volt[2] && ++ policy->l2_volt_tol && policy->l2_rate_set) { ++ vdd = of_parse_phandle(l2_np, "qcom,l2-supply", 0); ++ ++ if (vdd) { ++ l2_regulator = devm_regulator_get(cpu_dev, vdd->name); ++ if (!IS_ERR(l2_regulator)) { ++ policy->l2_regulator = l2_regulator; ++ policy->l2_volt_set = true; ++ } else { ++ pr_warn("failed to get l2 supply\n"); ++ l2_regulator = NULL; ++ } ++ ++ of_node_put(vdd); ++ } ++ } ++ } ++ + /* Support turbo/boost mode */ + if (policy_has_boost_freq(policy)) { + /* This gets disabled by core on driver unregister */ +--- a/include/linux/cpufreq.h ++++ b/include/linux/cpufreq.h +@@ -72,7 +72,15 @@ struct cpufreq_policy { + should set cpufreq */ + unsigned int cpu; /* cpu managing this policy, must be online */ + +- struct clk *clk; ++ struct clk *clk; ++ struct clk *l2_clk; /* L2 clock */ ++ struct regulator *l2_regulator; /* L2 supply */ ++ unsigned int l2_rate[3]; /* L2 bus clock rate */ ++ bool l2_rate_set; ++ unsigned int l2_cpufreq[3]; /* L2 target CPU frequency */ ++ unsigned int l2_volt[3]; /* L2 voltage array */ ++ bool l2_volt_set; ++ unsigned int l2_volt_tol; /* L2 voltage tolerance */ + struct cpufreq_cpuinfo cpuinfo;/* see above */ + + unsigned int min; /* in kHz */ diff --git a/target/linux/ipq806x/patches-5.4/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-5.4/0056-cpufreq-dt-Add-missing-rcu-locks.patch new file mode 100644 index 0000000000..ef03ba4de8 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0056-cpufreq-dt-Add-missing-rcu-locks.patch @@ -0,0 +1,23 @@ +From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov <georgi.djakov@linaro.org> +Date: Tue, 17 May 2016 16:15:43 +0300 +Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks + +Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> +--- + drivers/cpufreq/cpufreq-dt.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -173,8 +173,10 @@ static int opp_notifier(struct notifier_ + ret = PTR_ERR(cpu_reg); + goto out; + } ++ rcu_read_lock(); + volt = dev_pm_opp_get_voltage(opp); + freq = dev_pm_opp_get_freq(opp); ++ rcu_read_unlock(); + + mutex_lock(&priv->lock); + if (freq == priv->opp_freq) { diff --git a/target/linux/ipq806x/patches-5.4/0057-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.4/0057-add-fab-scaling-support-with-cpufreq.patch new file mode 100644 index 0000000000..dc65230f47 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0057-add-fab-scaling-support-with-cpufreq.patch @@ -0,0 +1,243 @@ +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k + clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o ++clk-qcom-y += fab_scaling.o + + # Keep alphabetically sorted by config + obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o +--- /dev/null ++++ b/drivers/clk/qcom/fab_scaling.c +@@ -0,0 +1,172 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/clk-provider.h> ++#include <linux/slab.h> ++#include <linux/fab_scaling.h> ++ ++struct qcom_fab_scaling_data { ++ u32 fab_freq_high; ++ u32 fab_freq_nominal; ++ u32 cpu_freq_threshold; ++ struct clk *apps_fab_clk; ++ struct clk *ddr_fab_clk; ++}; ++ ++static struct qcom_fab_scaling_data *drv_data; ++ ++int scale_fabrics(unsigned long max_cpu_freq) ++{ ++ struct clk *apps_fab_clk = drv_data->apps_fab_clk, ++ *ddr_fab_clk = drv_data->ddr_fab_clk; ++ unsigned long target_freq, cur_freq; ++ int ret; ++ ++ /* Skip fab scaling if the driver is not ready */ ++ if (!apps_fab_clk || !ddr_fab_clk) ++ return 0; ++ ++ if (max_cpu_freq > drv_data->cpu_freq_threshold) ++ target_freq = drv_data->fab_freq_high; ++ else ++ target_freq = drv_data->fab_freq_nominal; ++ ++ cur_freq = clk_get_rate(ddr_fab_clk); ++ ++ if (target_freq != cur_freq) { ++ ret = clk_set_rate(apps_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ ret = clk_set_rate(ddr_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(scale_fabrics); ++ ++static int ipq806x_fab_scaling_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct clk *apps_fab_clk, *ddr_fab_clk; ++ int ret; ++ ++ if (!np) ++ return -ENODEV; ++ ++ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); ++ if (!drv_data) ++ return -ENOMEM; ++ ++ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) { ++ pr_err("FABRICS turbo freq not found. Using defaults...\n"); ++ drv_data->fab_freq_high = 533000000; ++ } ++ ++ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) { ++ pr_err("FABRICS nominal freq not found. Using defaults...\n"); ++ drv_data->fab_freq_nominal = 400000000; ++ } ++ ++ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) { ++ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n"); ++ drv_data->cpu_freq_threshold = 1000000000; ++ } ++ ++ drv_data->apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk"); ++ apps_fab_clk = drv_data->apps_fab_clk; ++ ret = PTR_ERR_OR_ZERO(apps_fab_clk); ++ if (ret) { ++ /* ++ * If apps fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get APPS FABRIC clock: %d\n", ret); ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high); ++ clk_prepare_enable(apps_fab_clk); ++ ++ drv_data->ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk"); ++ ddr_fab_clk = drv_data->ddr_fab_clk; ++ ret = PTR_ERR_OR_ZERO(ddr_fab_clk); ++ if (ret) { ++ /* ++ * If ddr fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get DDR FABRIC clock: %d\n", ret); ++ ddr_fab_clk = NULL; ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high); ++ clk_prepare_enable(ddr_fab_clk); ++ ++ return 0; ++err: ++ kfree(drv_data); ++ return ret; ++} ++ ++static int ipq806x_fab_scaling_remove(struct platform_device *pdev) ++{ ++ kfree(drv_data); ++ return 0; ++} ++ ++static const struct of_device_id fab_scaling_ipq806x_match_table[] = { ++ { .compatible = "qcom,fab-scaling" }, ++ { } ++}; ++ ++static struct platform_driver fab_scaling_ipq806x_driver = { ++ .probe = ipq806x_fab_scaling_probe, ++ .remove = ipq806x_fab_scaling_remove, ++ .driver = { ++ .name = "fab-scaling", ++ .of_match_table = fab_scaling_ipq806x_match_table, ++ }, ++}; ++ ++static int __init fab_scaling_ipq806x_init(void) ++{ ++ return platform_driver_register(&fab_scaling_ipq806x_driver); ++} ++late_initcall(fab_scaling_ipq806x_init); ++ ++static void __exit fab_scaling_ipq806x_exit(void) ++{ ++ platform_driver_unregister(&fab_scaling_ipq806x_driver); ++} ++module_exit(fab_scaling_ipq806x_exit); +--- /dev/null ++++ b/include/linux/fab_scaling.h +@@ -0,0 +1,31 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++ ++#ifndef __FAB_SCALING_H ++#define __FAB_SCALING_H ++ ++/** ++ * scale_fabrics - Scale DDR and APPS FABRICS ++ * ++ * This function monitors all the registered clocks and does APPS ++ * and DDR FABRIC scaling based on the idle frequencies with which ++ * it was registered. ++ * ++ */ ++int scale_fabrics(unsigned long max_cpu_freq); ++ ++#endif +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -24,6 +24,7 @@ + #include <linux/regulator/consumer.h> + #include <linux/slab.h> + #include <linux/thermal.h> ++#include <linux/fab_scaling.h> + + #include "cpufreq-dt.h" + +@@ -106,6 +107,13 @@ static int set_target(struct cpufreq_pol + } + } + } ++ ++ /* ++ * Scale fabrics with max freq across all cores ++ */ ++ ret = scale_fabrics(target_freq); ++ if (ret) ++ goto exit; + } + priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, diff --git a/target/linux/ipq806x/patches-5.4/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-5.4/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch new file mode 100644 index 0000000000..5bd58c8137 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch @@ -0,0 +1,29 @@ +From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001 +From: Lina Iyer <lina.iyer@linaro.org> +Date: Wed, 25 Mar 2015 14:25:29 -0600 +Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus + +Define ARM_QCOM_CPUIDLE config item to enable cpuidle support. + +Cc: Stephen Boyd <sboyd@codeaurora.org> +Cc: Arnd Bergmann <arnd@arndb.de> +Cc: Kevin Hilman <khilman@linaro.org> +Cc: Daniel Lezcano <daniel.lezcano@linaro.org> +Signed-off-by: Lina Iyer <lina.iyer@linaro.org> +--- + drivers/cpuidle/Kconfig.arm | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/cpuidle/Kconfig.arm ++++ b/drivers/cpuidle/Kconfig.arm +@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE + depends on ARCH_MVEBU && !ARM64 + help + Select this to enable cpuidle on Armada 370, 38x and XP processors. ++ ++config ARM_QCOM_CPUIDLE ++ bool "CPU Idle Driver for QCOM processors" ++ depends on ARCH_QCOM ++ select ARM_CPUIDLE ++ help ++ Select this to enable cpuidle on QCOM processors. diff --git a/target/linux/ipq806x/patches-5.4/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-5.4/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch new file mode 100644 index 0000000000..543f18ce4d --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch @@ -0,0 +1,62 @@ +From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Wed, 29 Apr 2015 15:21:46 -0700 +Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom + +ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended +on most ARM architectures. This automatically calculate ZRELADDR by +masking PHYS_OFFSET with 0xf8000000. + +However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware +network accelerators, and the bootloader removes this section from the +layout passed from the ATAGS (when used). + +For newer bootloader, when DT is used, this is not a problem, we just +reserve this memory in the device tree. But if the bootloader doesn't +have DT support, then ATAGS have to be used. In this case, the ARM +decompressor will position the kernel in this low mem, which will not be +in the RAM section mapped by the bootloader, which means the kernel will +freeze in the middle of the boot process trying to map the memory. + +As a work around, this patch allows disabling AUTO_ZRELADDR when +ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders +which don't support device-tree, which is the case on certain early +IPQ806x based designs. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + arch/arm/Kconfig | 2 +- + arch/arm/Makefile | 2 ++ + arch/arm/mach-qcom/Makefile.boot | 1 + + 3 files changed, 4 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/mach-qcom/Makefile.boot + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -331,7 +331,7 @@ config ARCH_MULTIPLATFORM + depends on MMU + select ARM_HAS_SG_CHAIN + select ARM_PATCH_PHYS_VIRT +- select AUTO_ZRELADDR ++ select AUTO_ZRELADDR if !ARCH_QCOM + select TIMER_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -255,9 +255,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac + else + MACHINE := + endif ++ifeq ($(CONFIG_ARCH_QCOM),) + ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) + MACHINE := + endif ++endif + + machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) + platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) +--- /dev/null ++++ b/arch/arm/mach-qcom/Makefile.boot +@@ -0,0 +1 @@ ++zreladdr-y+= 0x42208000 diff --git a/target/linux/ipq806x/patches-5.4/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-5.4/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch new file mode 100644 index 0000000000..a4a957545b --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch @@ -0,0 +1,23 @@ +From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 09:31:44 +0100 +Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting + +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/mtd/qcom_smem_part.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/qcom_smem_part.c ++++ b/drivers/mtd/qcom_smem_part.c +@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st + m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); + m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); + ++ /* "rootfs" conflicts with OpenWrt auto mounting */ ++ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs")) ++ m_part->name = "ubi"; ++ + /* + * The last SMEM partition may have its size marked as + * something like 0xffffffff, which means "until the end of the diff --git a/target/linux/ipq806x/patches-5.4/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-5.4/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch new file mode 100644 index 0000000000..717934315a --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch @@ -0,0 +1,25 @@ +From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Wed, 18 Nov 2015 12:38:56 +0530 +Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG + +kernel got hanged while reading from /dev/hwrng at the +time of PRNG clock enable + +Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172 +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +--- + drivers/clk/qcom/gcc-ipq806x.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = { + .parent_map = gcc_pxo_pll8_map, + }, + .clkr = { ++ .enable_reg = 0x2e80, ++ .enable_mask = BIT(11), + .hw.init = &(struct clk_init_data){ + .name = "prng_src", + .parent_names = gcc_pxo_pll8, diff --git a/target/linux/ipq806x/patches-5.4/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-5.4/0063-1-ipq806x-tsens-driver.patch new file mode 100644 index 0000000000..9ee88533aa --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0063-1-ipq806x-tsens-driver.patch @@ -0,0 +1,614 @@ +From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian <rajith@codeaurora.org> +Date: Tue, 14 Feb 2017 18:30:43 +0530 +Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064 + +Add TSENS driver template to support IPQ8064. +This is a base file copied from tsens-8960.c + +Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7 +Signed-off-by: Rajith Cherian <rajith@codeaurora.org> + +ipq8064: tsens: TSENS driver support for IPQ8064 + +Support for IPQ8064 tsens driver. The driver works +with the thermal framework. The driver overrides the +following fucntionalities: + +1. Get current temperature. +2. Get/Set trip temperatures. +3. Enabled/Disable trip points. +4. ISR for threshold generated interrupt. +5. Notify userspace when trip points are hit. + +Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918 +Signed-off-by: Rajith Cherian <rajith@codeaurora.org> +--- + +--- a/drivers/thermal/qcom/Makefile ++++ b/drivers/thermal/qcom/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o ++qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o \ ++ tsens-ipq8064.o +--- /dev/null ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -0,0 +1,551 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/bitops.h> ++#include <linux/regmap.h> ++#include <linux/thermal.h> ++#include <linux/nvmem-consumer.h> ++#include <linux/io.h> ++#include <linux/interrupt.h> ++#include "tsens.h" ++ ++#define CAL_MDEGC 30000 ++ ++#define CONFIG_ADDR 0x3640 ++/* CONFIG_ADDR bitmasks */ ++#define CONFIG 0x9b ++#define CONFIG_MASK 0xf ++#define CONFIG_SHIFT 0 ++ ++#define STATUS_CNTL_8064 0x3660 ++#define CNTL_ADDR 0x3620 ++/* CNTL_ADDR bitmasks */ ++#define EN BIT(0) ++#define SW_RST BIT(1) ++#define SENSOR0_EN BIT(3) ++#define SLP_CLK_ENA BIT(26) ++#define MEASURE_PERIOD 1 ++#define SENSOR0_SHIFT 3 ++ ++/* INT_STATUS_ADDR bitmasks */ ++#define MIN_STATUS_MASK BIT(0) ++#define LOWER_STATUS_CLR BIT(1) ++#define UPPER_STATUS_CLR BIT(2) ++#define MAX_STATUS_MASK BIT(3) ++ ++#define THRESHOLD_ADDR 0x3624 ++/* THRESHOLD_ADDR bitmasks */ ++#define THRESHOLD_MAX_CODE 0x20000 ++#define THRESHOLD_MIN_CODE 0 ++#define THRESHOLD_MAX_LIMIT_SHIFT 24 ++#define THRESHOLD_MIN_LIMIT_SHIFT 16 ++#define THRESHOLD_UPPER_LIMIT_SHIFT 8 ++#define THRESHOLD_LOWER_LIMIT_SHIFT 0 ++#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MAX_LIMIT_SHIFT) ++#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MIN_LIMIT_SHIFT) ++#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_UPPER_LIMIT_SHIFT) ++#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_LOWER_LIMIT_SHIFT) ++ ++/* Initial temperature threshold values */ ++#define LOWER_LIMIT_TH 0x9d /* 95C */ ++#define UPPER_LIMIT_TH 0xa6 /* 105C */ ++#define MIN_LIMIT_TH 0x0 ++#define MAX_LIMIT_TH 0xff ++ ++#define S0_STATUS_ADDR 0x3628 ++#define STATUS_ADDR_OFFSET 2 ++#define SENSOR_STATUS_SIZE 4 ++#define INT_STATUS_ADDR 0x363c ++#define TRDY_MASK BIT(7) ++#define TIMEOUT_US 100 ++ ++#define TSENS_EN BIT(0) ++#define TSENS_SW_RST BIT(1) ++#define TSENS_ADC_CLK_SEL BIT(2) ++#define SENSOR0_EN BIT(3) ++#define SENSOR1_EN BIT(4) ++#define SENSOR2_EN BIT(5) ++#define SENSOR3_EN BIT(6) ++#define SENSOR4_EN BIT(7) ++#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \ ++ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN) ++#define TSENS_8064_SENSOR5_EN BIT(8) ++#define TSENS_8064_SENSOR6_EN BIT(9) ++#define TSENS_8064_SENSOR7_EN BIT(10) ++#define TSENS_8064_SENSOR8_EN BIT(11) ++#define TSENS_8064_SENSOR9_EN BIT(12) ++#define TSENS_8064_SENSOR10_EN BIT(13) ++#define TSENS_8064_SENSORS_EN (SENSORS_EN | \ ++ TSENS_8064_SENSOR5_EN | \ ++ TSENS_8064_SENSOR6_EN | \ ++ TSENS_8064_SENSOR7_EN | \ ++ TSENS_8064_SENSOR8_EN | \ ++ TSENS_8064_SENSOR9_EN | \ ++ TSENS_8064_SENSOR10_EN) ++ ++#define TSENS_8064_SEQ_SENSORS 5 ++#define TSENS_8064_S4_S5_OFFSET 40 ++#define TSENS_FACTOR 1 ++ ++/* Trips: from very hot to very cold */ ++enum tsens_trip_type { ++ TSENS_TRIP_STAGE3 = 0, ++ TSENS_TRIP_STAGE2, ++ TSENS_TRIP_STAGE1, ++ TSENS_TRIP_STAGE0, ++ TSENS_TRIP_NUM, ++}; ++ ++u32 tsens_8064_slope[] = { ++ 1176, 1176, 1154, 1176, ++ 1111, 1132, 1132, 1199, ++ 1132, 1199, 1132 ++ }; ++ ++/* Temperature on y axis and ADC-code on x-axis */ ++static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s) ++{ ++ int degcbeforefactor, degc; ++ ++ degcbeforefactor = (adc_code * s->slope) + s->offset; ++ ++ if (degcbeforefactor == 0) ++ degc = degcbeforefactor; ++ else if (degcbeforefactor > 0) ++ degc = (degcbeforefactor + TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ else ++ degc = (degcbeforefactor - TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ ++ return degc; ++} ++ ++static int degC_to_code(int degC, const struct tsens_sensor *s) ++{ ++ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2)) ++ / s->slope; ++ ++ if (code > THRESHOLD_MAX_CODE) ++ code = THRESHOLD_MAX_CODE; ++ else if (code < THRESHOLD_MIN_CODE) ++ code = THRESHOLD_MIN_CODE; ++ return code; ++} ++ ++static int suspend_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret; ++ unsigned int mask; ++ struct regmap *map = tmdev->map; ++ ++ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); ++ if (ret) ++ return ret; ++ ++ mask = SLP_CLK_ENA | EN; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int resume_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret; ++ struct regmap *map = tmdev->map; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); ++ if (ret) ++ return ret; ++ ++ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static void notify_uspace_tsens_fn(struct work_struct *work) ++{ ++ struct tsens_sensor *s = container_of(work, struct tsens_sensor, ++ notify_work); ++ ++ sysfs_notify(&s->tzd->device.kobj, NULL, "type"); ++} ++ ++static void tsens_scheduler_fn(struct work_struct *work) ++{ ++ struct tsens_device *tmdev = container_of(work, struct tsens_device, ++ tsens_work); ++ unsigned int threshold, threshold_low, code, reg, sensor, mask; ++ unsigned int sensor_addr; ++ bool upper_th_x, lower_th_x; ++ int adc_code, ret; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR; ++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg); ++ if (ret) ++ return; ++ ++ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR); ++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold); ++ if (ret) ++ return; ++ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ ++ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor); ++ if (ret) ++ return; ++ sensor &= (uint32_t) TSENS_8064_SENSORS_EN; ++ sensor >>= SENSOR0_SHIFT; ++ ++ /* Constraint: There is only 1 interrupt control register for all ++ * 11 temperature sensor. So monitoring more than 1 sensor based ++ * on interrupts will yield inconsistent result. To overcome this ++ * issue we will monitor only sensor 0 which is the master sensor. ++ */ ++ ++ /* Skip if the sensor is disabled */ ++ if (sensor & 1) { ++ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code); ++ if (ret) ++ return; ++ upper_th_x = code >= threshold; ++ lower_th_x = code <= threshold_low; ++ if (upper_th_x) ++ mask |= UPPER_STATUS_CLR; ++ if (lower_th_x) ++ mask |= LOWER_STATUS_CLR; ++ if (upper_th_x || lower_th_x) { ++ /* Notify user space */ ++ schedule_work(&tmdev->sensor[0].notify_work); ++ regmap_read(tmdev->map, sensor_addr, &adc_code); ++ pr_debug("Trigger (%d degrees) for sensor %d\n", ++ code_to_degC(adc_code, &tmdev->sensor[0]), 0); ++ } ++ } ++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask); ++ ++ /* force memory to sync */ ++ mb(); ++} ++ ++static irqreturn_t tsens_isr(int irq, void *data) ++{ ++ struct tsens_device *tmdev = data; ++ ++ schedule_work(&tmdev->tsens_work); ++ return IRQ_HANDLED; ++} ++ ++static void hw_init(struct tsens_device *tmdev) ++{ ++ int ret; ++ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0; ++ unsigned int reg_status_cntl = 0; ++ ++ regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST); ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18) ++ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT); ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ regmap_read(tmdev->map, STATUS_CNTL_8064, ®_status_cntl); ++ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR ++ | MIN_STATUS_MASK | MAX_STATUS_MASK; ++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl); ++ reg_cntl |= TSENS_EN; ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ ++ regmap_read(tmdev->map, CONFIG_ADDR, ®_cfg); ++ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT); ++ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg); ++ ++ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) ++ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) ++ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) ++ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT); ++ ++ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr); ++ ++ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr, ++ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev); ++ if (ret < 0) { ++ pr_err("%s: request_irq FAIL: %d\n", __func__, ret); ++ return; ++ } ++ ++ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn); ++} ++ ++static int init_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret, i; ++ u32 reg_cntl, offset = 0; ++ ++ init_common(tmdev); ++ if (!tmdev->map) ++ return -ENODEV; ++ ++ /* ++ * The status registers for each sensor are discontiguous ++ * because some SoCs have 5 sensors while others have more ++ * but the control registers stay in the same place, i.e ++ * directly after the first 5 status registers. ++ */ ++ for (i = 0; i < tmdev->num_sensors; i++) { ++ if (i >= TSENS_8064_SEQ_SENSORS) ++ offset = TSENS_8064_S4_S5_OFFSET; ++ ++ tmdev->sensor[i].status = S0_STATUS_ADDR + offset ++ + (i << STATUS_ADDR_OFFSET); ++ tmdev->sensor[i].slope = tsens_8064_slope[i]; ++ INIT_WORK(&tmdev->sensor[i].notify_work, ++ notify_uspace_tsens_fn); ++ } ++ ++ reg_cntl = SW_RST; ++ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); ++ reg_cntl &= ~SW_RST; ++ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, ++ CONFIG_MASK, CONFIG); ++ ++ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; ++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= EN; ++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int calibrate_ipq8064(struct tsens_device *tmdev) ++{ ++ int i; ++ char *data, *data_backup; ++ ++ ssize_t num_read = tmdev->num_sensors; ++ struct tsens_sensor *s = tmdev->sensor; ++ ++ data = qfprom_read(tmdev->dev, "calib"); ++ if (IS_ERR(data)) { ++ pr_err("Calibration not found.\n"); ++ return PTR_ERR(data); ++ } ++ ++ data_backup = qfprom_read(tmdev->dev, "calib_backup"); ++ if (IS_ERR(data_backup)) { ++ pr_err("Backup calibration not found.\n"); ++ return PTR_ERR(data_backup); ++ } ++ ++ for (i = 0; i < num_read; i++) { ++ s[i].calib_data = readb_relaxed(data + i); ++ s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (s[i].calib_data_backup) ++ s[i].calib_data = s[i].calib_data_backup; ++ if (!s[i].calib_data) { ++ pr_err("QFPROM TSENS calibration data not present\n"); ++ return -ENODEV; ++ } ++ s[i].slope = tsens_8064_slope[i]; ++ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); ++ } ++ ++ hw_init(tmdev); ++ ++ return 0; ++} ++ ++static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp) ++{ ++ int ret; ++ u32 code, trdy; ++ const struct tsens_sensor *s = &tmdev->sensor[id]; ++ unsigned long timeout; ++ ++ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); ++ do { ++ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); ++ if (ret) ++ return ret; ++ if (!(trdy & TRDY_MASK)) ++ continue; ++ ret = regmap_read(tmdev->map, s->status, &code); ++ if (ret) ++ return ret; ++ *temp = code_to_degC(code, s); ++ return 0; ++ } while (time_before(jiffies, timeout)); ++ ++ return -ETIMEDOUT; ++} ++ ++static int set_trip_temp_ipq8064(void *data, int trip, int temp) ++{ ++ unsigned int reg_th, reg_cntl; ++ int ret, code, code_chk, hi_code, lo_code; ++ const struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ code_chk = code = degC_to_code(temp, s); ++ ++ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE) ++ return -EINVAL; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, ®_th); ++ if (ret) ++ return ret; ++ ++ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ code <<= THRESHOLD_MAX_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ if (code_chk <= lo_code) ++ return -EINVAL; ++ code <<= THRESHOLD_UPPER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE1: ++ if (code_chk >= hi_code) ++ return -EINVAL; ++ code <<= THRESHOLD_LOWER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE0: ++ code <<= THRESHOLD_MIN_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int set_trip_activate_ipq8064(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ unsigned int reg_cntl, mask, val; ++ const struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ int ret; ++ ++ if (!tmdev || trip < 0) ++ return -EINVAL; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ mask = MAX_STATUS_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ mask = UPPER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE1: ++ mask = LOWER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE0: ++ mask = MIN_STATUS_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED) ++ val = reg_cntl | mask; ++ else ++ val = reg_cntl & ~mask; ++ ++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val); ++ if (ret) ++ return ret; ++ ++ /* force memory to sync */ ++ mb(); ++ return 0; ++} ++ ++const struct tsens_ops ops_ipq8064 = { ++ .init = init_ipq8064, ++ .calibrate = calibrate_ipq8064, ++ .get_temp = get_temp_ipq8064, ++ .suspend = suspend_ipq8064, ++ .resume = resume_ipq8064, ++ .set_trip_temp = set_trip_temp_ipq8064, ++ .set_trip_activate = set_trip_activate_ipq8064, ++}; ++ ++const struct tsens_data data_ipq8064 = { ++ .num_sensors = 11, ++ .ops = &ops_ipq8064, ++}; +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -75,8 +75,11 @@ static const struct of_device_id tsens_t + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, ++ }, { ++ .compatible = "qcom,ipq8064-tsens", ++ .data = &data_ipq8064, + }, +- {} ++ {} + }; + MODULE_DEVICE_TABLE(of, tsens_table); + +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -89,7 +89,7 @@ int init_common(struct tsens_device *); + int get_temp_common(struct tsens_device *, int, int *); + + /* TSENS v1 targets */ +-extern const struct tsens_data data_8916, data_8974, data_8960; ++extern const struct tsens_data data_8916, data_8974, data_8960, data_ipq8064; + /* TSENS v2 targets */ + extern const struct tsens_data data_8996, data_tsens_v2; + diff --git a/target/linux/ipq806x/patches-5.4/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-5.4/0063-2-tsens-support-configurable-interrupts.patch new file mode 100644 index 0000000000..62e26cbee4 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0063-2-tsens-support-configurable-interrupts.patch @@ -0,0 +1,434 @@ +From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian <rajith@codeaurora.org> +Date: Wed, 1 Feb 2017 19:00:26 +0530 +Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts + +Provide support for adding configurable high and +configurable low trip temperatures. An interrupts is +also triggerred when these trip points are hit. The +interrupts can be activated or deactivated from sysfs. +This functionality is made available only if +CONFIG_THERMAL_WRITABLE_TRIPS is defined. + +Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934 +Signed-off-by: Rajith Cherian <rajith@codeaurora.org> +--- + .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++ + drivers/thermal/of-thermal.c | 63 ++++++++++++++++++---- + drivers/thermal/qcom/tsens.c | 43 ++++++++++++--- + drivers/thermal/qcom/tsens.h | 11 ++++ + drivers/thermal/thermal_core.c | 44 ++++++++++++++- + include/linux/thermal.h | 14 +++++ + 6 files changed, 162 insertions(+), 17 deletions(-) + +--- a/drivers/thermal/of-thermal.c ++++ b/drivers/thermal/of-thermal.c +@@ -77,7 +77,7 @@ static int of_thermal_get_temp(struct th + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_temp) ++ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_temp(data->sensor_data, temp); +@@ -88,7 +88,8 @@ static int of_thermal_set_trips(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops || !data->ops->set_trips) ++ if (!data->ops || !data->ops->set_trips ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->set_trips(data->sensor_data, low, high); +@@ -174,6 +175,9 @@ static int of_thermal_set_emul_temp(stru + { + struct __thermal_zone *data = tz->devdata; + ++ if (data->mode == THERMAL_DEVICE_DISABLED) ++ return -EINVAL; ++ + return data->ops->set_emul_temp(data->sensor_data, temp); + } + +@@ -182,7 +186,7 @@ static int of_thermal_get_trend(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_trend) ++ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_trend(data->sensor_data, trip, trend); +@@ -271,7 +275,9 @@ static int of_thermal_set_mode(struct th + mutex_unlock(&tz->lock); + + data->mode = mode; +- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); ++ ++ if (mode == THERMAL_DEVICE_ENABLED) ++ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return 0; + } +@@ -281,7 +287,8 @@ static int of_thermal_get_trip_type(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *type = data->trips[trip].type; +@@ -289,12 +296,39 @@ static int of_thermal_get_trip_type(stru + return 0; + } + ++static int of_thermal_activate_trip_type(struct thermal_zone_device *tz, ++ int trip, enum thermal_trip_activation_mode mode) ++{ ++ struct __thermal_zone *data = tz->devdata; ++ ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) ++ return -EDOM; ++ ++ /* ++ * The configurable_hi and configurable_lo trip points can be ++ * activated and deactivated. ++ */ ++ ++ if (data->ops->set_trip_activate) { ++ int ret; ++ ++ ret = data->ops->set_trip_activate(data->sensor_data, ++ trip, mode); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, + int *temp) + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *temp = data->trips[trip].temperature; +@@ -307,7 +341,8 @@ static int of_thermal_set_trip_temp(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + if (data->ops->set_trip_temp) { +@@ -329,7 +364,8 @@ static int of_thermal_get_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *hyst = data->trips[trip].hysteresis; +@@ -342,7 +378,8 @@ static int of_thermal_set_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ +@@ -417,6 +454,9 @@ thermal_zone_of_add_sensor(struct device + if (ops->set_emul_temp) + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; + ++ if (ops->set_trip_activate) ++ tzd->ops->set_trip_activate = of_thermal_activate_trip_type; ++ + mutex_unlock(&tzd->lock); + + return tzd; +@@ -711,7 +751,10 @@ static const char * const trip_types[] = + [THERMAL_TRIP_ACTIVE] = "active", + [THERMAL_TRIP_PASSIVE] = "passive", + [THERMAL_TRIP_HOT] = "hot", +- [THERMAL_TRIP_CRITICAL] = "critical", ++ [THERMAL_TRIP_CRITICAL] = "critical_high", ++ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi", ++ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo", ++ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low", + }; + + /** +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in + + static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) + { +- const struct tsens_sensor *s = p; ++ struct tsens_sensor *s = p; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) +@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int + return -ENOTSUPP; + } + +-static int __maybe_unused tsens_suspend(struct device *dev) ++static int __maybe_unused tsens_suspend(void *data) + { +- struct tsens_device *tmdev = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops && tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); +@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend + return 0; + } + +-static int __maybe_unused tsens_resume(struct device *dev) ++static int __maybe_unused tsens_resume(void *data) + { +- struct tsens_device *tmdev = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); +@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s + return 0; + } + ++static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ if (tmdev->ops && tmdev->ops->set_trip_temp) ++ return tmdev->ops->set_trip_temp(s, trip, temp); ++ ++ return 0; ++} ++ ++static int __maybe_unused tsens_activate_trip_type(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ if (tmdev->ops && tmdev->ops->set_trip_activate) ++ return tmdev->ops->set_trip_activate(s, trip, mode); ++ ++ return 0; ++} ++ ++ + static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + + static const struct of_device_id tsens_table[] = { +@@ -86,6 +112,8 @@ MODULE_DEVICE_TABLE(of, tsens_table); + static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, ++ .set_trip_temp = tsens_set_trip_temp, ++ .set_trip_activate = tsens_activate_trip_type, + }; + + static int tsens_register(struct tsens_device *tmdev) +@@ -134,7 +162,7 @@ static int tsens_probe(struct platform_d + if (id) + data = id->data; + else +- data = &data_8960; ++ return -EINVAL; + + num_sensors = data->num_sensors; + +@@ -155,6 +183,9 @@ static int tsens_probe(struct platform_d + tmdev->dev = dev; + tmdev->num_sensors = num_sensors; + tmdev->ops = data->ops; ++ ++ tmdev->tsens_irq = platform_get_irq(pdev, 0); ++ + for (i = 0; i < tmdev->num_sensors; i++) { + if (data->hw_ids) + tmdev->sensor[i].hw_id = data->hw_ids[i]; +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -24,9 +24,12 @@ struct tsens_device; + struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; ++ struct work_struct notify_work; + int offset; + int id; + int hw_id; ++ int calib_data; ++ int calib_data_backup; + int slope; + u32 status; + }; +@@ -41,6 +44,9 @@ struct tsens_sensor { + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend ++ * @set_trip_temp: Function to set trip temp ++ * @get_trip_temp: Function to get trip temp ++ * @set_trip_activate: Function to activate trip points + */ + struct tsens_ops { + /* mandatory callbacks */ +@@ -53,6 +59,9 @@ struct tsens_ops { + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, enum thermal_trend *); ++ int (*set_trip_temp)(void *, int, int); ++ int (*set_trip_activate)(void *, int, ++ enum thermal_trip_activation_mode); + }; + + /** +@@ -76,10 +85,12 @@ struct tsens_context { + struct tsens_device { + struct device *dev; + u32 num_sensors; ++ u32 tsens_irq; + struct regmap *map; + u32 tm_offset; + struct tsens_context ctx; + const struct tsens_ops *ops; ++ struct work_struct tsens_work; + struct tsens_sensor sensor[0]; + }; + +--- a/drivers/thermal/thermal_sysfs.c ++++ b/drivers/thermal/thermal_sysfs.c +@@ -113,12 +113,48 @@ trip_point_type_show(struct device *dev, + return sprintf(buf, "passive\n"); + case THERMAL_TRIP_ACTIVE: + return sprintf(buf, "active\n"); ++ case THERMAL_TRIP_CONFIGURABLE_HI: ++ return sprintf(buf, "configurable_hi\n"); ++ case THERMAL_TRIP_CONFIGURABLE_LOW: ++ return sprintf(buf, "configurable_low\n"); ++ case THERMAL_TRIP_CRITICAL_LOW: ++ return sprintf(buf, "critical_low\n"); + default: + return sprintf(buf, "unknown\n"); + } + } + + static ssize_t ++trip_point_type_activate(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct thermal_zone_device *tz = to_thermal_zone(dev); ++ int trip, ret; ++ char *enabled = "enabled"; ++ char *disabled = "disabled"; ++ ++ if (!tz->ops->set_trip_activate) ++ return -EPERM; ++ ++ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) ++ return -EINVAL; ++ ++ if (!strncmp(buf, enabled, strlen(enabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_ENABLED); ++ else if (!strncmp(buf, disabled, strlen(disabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_DISABLED); ++ else ++ ret = -EINVAL; ++ ++ if (ret) ++ return ret; ++ ++ return count; ++} ++ ++static ssize_t + trip_point_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) + { +@@ -559,6 +595,12 @@ static int create_trip_attrs(struct ther + tz->trip_type_attrs[indx].attr.show = trip_point_type_show; + attrs[indx] = &tz->trip_type_attrs[indx].attr.attr; + ++ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) { ++ tz->trip_type_attrs[indx].attr.store ++ = trip_point_type_activate; ++ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR; ++ } ++ + /* create trip temp attribute */ + snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_temp", indx); +--- a/include/linux/thermal.h ++++ b/include/linux/thermal.h +@@ -63,11 +63,19 @@ enum thermal_device_mode { + THERMAL_DEVICE_ENABLED, + }; + ++enum thermal_trip_activation_mode { ++ THERMAL_TRIP_ACTIVATION_DISABLED = 0, ++ THERMAL_TRIP_ACTIVATION_ENABLED, ++}; ++ + enum thermal_trip_type { + THERMAL_TRIP_ACTIVE = 0, + THERMAL_TRIP_PASSIVE, + THERMAL_TRIP_HOT, + THERMAL_TRIP_CRITICAL, ++ THERMAL_TRIP_CONFIGURABLE_HI, ++ THERMAL_TRIP_CONFIGURABLE_LOW, ++ THERMAL_TRIP_CRITICAL_LOW, + }; + + enum thermal_trend { +@@ -105,6 +113,8 @@ struct thermal_zone_device_ops { + enum thermal_trip_type *); + int (*get_trip_temp) (struct thermal_zone_device *, int, int *); + int (*set_trip_temp) (struct thermal_zone_device *, int, int); ++ int (*set_trip_activate) (struct thermal_zone_device *, int, ++ enum thermal_trip_activation_mode); + int (*get_trip_hyst) (struct thermal_zone_device *, int, int *); + int (*set_trip_hyst) (struct thermal_zone_device *, int, int); + int (*get_crit_temp) (struct thermal_zone_device *, int *); +@@ -349,6 +359,8 @@ struct thermal_genl_event { + * temperature. + * @set_trip_temp: a pointer to a function that sets the trip temperature on + * hardware. ++ * @activate_trip_type: a pointer to a function to enable/disable trip ++ * temperature interrupts + */ + struct thermal_zone_of_device_ops { + int (*get_temp)(void *, int *); +@@ -356,6 +368,8 @@ struct thermal_zone_of_device_ops { + int (*set_trips)(void *, int, int); + int (*set_emul_temp)(void *, int); + int (*set_trip_temp)(void *, int, int); ++ int (*set_trip_activate)(void *, int, ++ enum thermal_trip_activation_mode); + }; + + /** diff --git a/target/linux/ipq806x/patches-5.4/0063-3-tsens-fix-kernel-4_19.patch b/target/linux/ipq806x/patches-5.4/0063-3-tsens-fix-kernel-4_19.patch new file mode 100644 index 0000000000..a870692906 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0063-3-tsens-fix-kernel-4_19.patch @@ -0,0 +1,20 @@ +--- a/drivers/thermal/qcom/tsens-common.c ++++ b/drivers/thermal/qcom/tsens-common.c +@@ -128,6 +128,7 @@ int __init init_common(struct tsens_devi + { + void __iomem *base; + struct resource *res; ++ resource_size_t size; + struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node); + + if (!op) +@@ -142,7 +143,8 @@ int __init init_common(struct tsens_devi + } + + res = platform_get_resource(op, IORESOURCE_MEM, 0); +- base = devm_ioremap_resource(&op->dev, res); ++ size = resource_size(res); ++ base = devm_ioremap(&op->dev, res->start, size); + if (IS_ERR(base)) + return PTR_ERR(base); + diff --git a/target/linux/ipq806x/patches-5.4/0063-4-ip806x-tsense-rework-driver.patch b/target/linux/ipq806x/patches-5.4/0063-4-ip806x-tsense-rework-driver.patch new file mode 100644 index 0000000000..951145b3de --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0063-4-ip806x-tsense-rework-driver.patch @@ -0,0 +1,107 @@ +--- a/drivers/thermal/qcom/tsens-ipq8064.c ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -13,10 +13,12 @@ + */ + + #include <linux/platform_device.h> ++#include <linux/err.h> + #include <linux/delay.h> + #include <linux/bitops.h> + #include <linux/regmap.h> + #include <linux/thermal.h> ++#include <linux/slab.h> + #include <linux/nvmem-consumer.h> + #include <linux/io.h> + #include <linux/interrupt.h> +@@ -210,9 +212,8 @@ static void tsens_scheduler_fn(struct wo + struct tsens_device *tmdev = container_of(work, struct tsens_device, + tsens_work); + unsigned int threshold, threshold_low, code, reg, sensor, mask; +- unsigned int sensor_addr; + bool upper_th_x, lower_th_x; +- int adc_code, ret; ++ int ret; + + ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); + if (ret) +@@ -261,9 +262,8 @@ static void tsens_scheduler_fn(struct wo + if (upper_th_x || lower_th_x) { + /* Notify user space */ + schedule_work(&tmdev->sensor[0].notify_work); +- regmap_read(tmdev->map, sensor_addr, &adc_code); + pr_debug("Trigger (%d degrees) for sensor %d\n", +- code_to_degC(adc_code, &tmdev->sensor[0]), 0); ++ code_to_degC(code, &tmdev->sensor[0]), 0); + } + } + regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask); +@@ -372,40 +372,55 @@ static int init_ipq8064(struct tsens_dev + static int calibrate_ipq8064(struct tsens_device *tmdev) + { + int i; +- char *data, *data_backup; +- ++ int ret = 0; ++ u8 *data, *data_backup; ++ struct device *dev = tmdev->dev; + ssize_t num_read = tmdev->num_sensors; + struct tsens_sensor *s = tmdev->sensor; + +- data = qfprom_read(tmdev->dev, "calib"); ++ data = qfprom_read(dev, "calib"); + if (IS_ERR(data)) { +- pr_err("Calibration not found.\n"); +- return PTR_ERR(data); ++ ret = PTR_ERR(data); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Calibration not found."); ++ goto exit; + } + +- data_backup = qfprom_read(tmdev->dev, "calib_backup"); ++ data_backup = qfprom_read(dev, "calib_backup"); + if (IS_ERR(data_backup)) { +- pr_err("Backup calibration not found.\n"); +- return PTR_ERR(data_backup); ++ ret = PTR_ERR(data_backup); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Backup Calibration not found."); ++ goto free_data; + } + + for (i = 0; i < num_read; i++) { + s[i].calib_data = readb_relaxed(data + i); +- s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (!s[i].calib_data) { ++ s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (!s[i].calib_data_backup) { ++ dev_err(dev, "QFPROM TSENS calibration data not present"); ++ ret = -ENODEV; ++ goto free_backup; ++ } + +- if (s[i].calib_data_backup) + s[i].calib_data = s[i].calib_data_backup; +- if (!s[i].calib_data) { +- pr_err("QFPROM TSENS calibration data not present\n"); +- return -ENODEV; + } ++ + s[i].slope = tsens_8064_slope[i]; + s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); + } + + hw_init(tmdev); + +- return 0; ++free_backup: ++ kfree(data_backup); ++free_data: ++ kfree(data); ++exit: ++ return ret; + } + + static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp) diff --git a/target/linux/ipq806x/patches-5.4/0064-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-5.4/0064-clk-clk-rpm-fixes.patch new file mode 100644 index 0000000000..72217de12e --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0064-clk-clk-rpm-fixes.patch @@ -0,0 +1,95 @@ +From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 09:32:40 +0100 +Subject: [PATCH 64/69] clk: clk-rpm fixes + +Signed-off-by: John Crispin <john@phrozen.org> +--- + .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + + drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++ + include/dt-bindings/clock/qcom,rpmcc.h | 4 +++ + 3 files changed, 40 insertions(+) + +--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt ++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +@@ -16,6 +16,7 @@ Required properties : + "qcom,rpmcc-msm8974", "qcom,rpmcc" + "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" ++ "qcom,rpmcc-ipq806x", "qcom,rpmcc" + + - #clock-cells : shall contain 1 + +--- a/include/dt-bindings/clock/qcom,rpmcc.h ++++ b/include/dt-bindings/clock/qcom,rpmcc.h +@@ -45,6 +45,10 @@ + #define RPM_XO_A0 27 + #define RPM_XO_A1 28 + #define RPM_XO_A2 29 ++#define RPM_NSS_FABRIC_0_CLK 30 ++#define RPM_NSS_FABRIC_0_A_CLK 31 ++#define RPM_NSS_FABRIC_1_CLK 32 ++#define RPM_NSS_FABRIC_1_A_CLK 33 + + /* SMD RPM clocks */ + #define RPM_SMD_XO_CLK_SRC 0 +--- a/drivers/clk/qcom/clk-rpm.c ++++ b/drivers/clk/qcom/clk-rpm.c +@@ -520,6 +520,16 @@ DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a0_ + DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a1_clk, xo_a1_a_clk, 24); + DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a2_clk, xo_a2_a_clk, 28); + ++/* ipq806x */ ++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); ++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK); ++ + static struct clk_rpm *apq8064_clks[] = { + [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk, + [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk, +@@ -546,15 +556,40 @@ static struct clk_rpm *apq8064_clks[] = + [RPM_XO_A2] = &apq8064_xo_a2_clk, + }; + ++static struct clk_rpm *ipq806x_clks[] = { ++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk, ++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk, ++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk, ++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk, ++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk, ++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk, ++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk, ++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk, ++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk, ++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk, ++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk, ++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk, ++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk, ++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk, ++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk, ++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk, ++}; ++ + static const struct rpm_clk_desc rpm_clk_apq8064 = { + .clks = apq8064_clks, + .num_clks = ARRAY_SIZE(apq8064_clks), + }; + ++static const struct rpm_clk_desc rpm_clk_ipq806x = { ++ .clks = ipq806x_clks, ++ .num_clks = ARRAY_SIZE(ipq806x_clks), ++}; ++ + static const struct of_device_id rpm_clk_match_table[] = { + { .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 }, + { .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 }, + { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, ++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_clk_match_table); diff --git a/target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch new file mode 100644 index 0000000000..6f1cdcf4d6 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch @@ -0,0 +1,21 @@ +From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 09:33:32 +0100 +Subject: [PATCH 65/69] arm: override compiler flags + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/arm/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -64,7 +64,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i + # macro, but instead defines a whole series of macros which makes + # testing for a specific architecture or later rather impossible. + arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m +-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) ++arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 + arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + # Only override the compiler option if ARMv6. The ARMv6K extensions are + # always available in ARMv7 diff --git a/target/linux/ipq806x/patches-5.4/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-5.4/0067-generic-Mangle-bootloader-s-kernel-arguments.patch new file mode 100644 index 0000000000..b7b9c991e0 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0067-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -0,0 +1,189 @@ +From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 +From: Adrian Panella <ianchi74@outlook.com> +Date: Thu, 9 Mar 2017 09:37:17 +0100 +Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments + +The command-line arguments provided by the boot loader will be +appended to a new device tree property: bootloader-args. +If there is a property "append-rootblock" in DT under /chosen +and a root= option in bootloaders command line it will be parsed +and added to DT bootargs with the form: <append-rootblock>XX. +Only command line ATAG will be processed, the rest of the ATAGs +sent by bootloader will be ignored. +This is usefull in dual boot systems, to get the current root partition +without afecting the rest of the system. + +Signed-off-by: Adrian Panella <ianchi74@outlook.com> +--- + arch/arm/Kconfig | 11 +++++ + arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- + init/main.c | 16 ++++++++ + 3 files changed, 98 insertions(+), 1 deletion(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1926,6 +1926,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + ++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ bool "Append rootblock parsing bootloader's kernel arguments" ++ help ++ The command-line arguments provided by the boot loader will be ++ appended to a new device tree property: bootloader-args. ++ If there is a property "append-rootblock" in DT under /chosen ++ and a root= option in bootloaders command line it will be parsed ++ and added to DT bootargs with the form: <append-rootblock>XX. ++ Only command line ATAG will be processed, the rest of the ATAGs ++ sent by bootloader will be ignored. ++ + endchoice + + config CMDLINE +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -4,6 +4,8 @@ + + #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) + #define do_extend_cmdline 1 ++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#define do_extend_cmdline 1 + #else + #define do_extend_cmdline 0 + #endif +@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ ++static char *append_rootblock(char *dest, const char *str, int len, void *fdt) ++{ ++ char *ptr, *end; ++ char *root="root="; ++ int i, l; ++ const char *rootblock; ++ ++ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually ++ ptr = str - 1; ++ ++ do { ++ //first find an 'r' at the begining or after a space ++ do { ++ ptr++; ++ ptr = strchr(ptr, 'r'); ++ if(!ptr) return dest; ++ ++ } while (ptr != str && *(ptr-1) != ' '); ++ ++ //then check for the rest ++ for(i = 1; i <= 4; i++) ++ if(*(ptr+i) != *(root+i)) break; ++ ++ } while (i != 5); ++ ++ end = strchr(ptr, ' '); ++ end = end ? (end - 1) : (strchr(ptr, 0) - 1); ++ ++ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) ++ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); ++ ptr = end + 1; ++ ++ /* if append-rootblock property is set use it to append to command line */ ++ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); ++ if(rootblock != NULL) { ++ if(*dest != ' ') { ++ *dest = ' '; ++ dest++; ++ len++; ++ } ++ if (len + l + i <= COMMAND_LINE_SIZE) { ++ memcpy(dest, rootblock, l); ++ dest += l - 1; ++ memcpy(dest, ptr, i); ++ dest += i; ++ } ++ } ++ return dest; ++} ++#endif ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //save original bootloader args ++ //and append ubi.mtd with root partition number to current cmdline ++ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); ++ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); ++ ++#else + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } ++#endif + } + *ptr = '\0'; + +@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void * + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); +- } else if (atag->hdr.tag == ATAG_MEM) { ++ } ++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + if (!atag->u.mem.size) +@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void * + setprop(fdt, "/memory", "reg", mem_reg_property, + 4 * memcount * memsize); + } ++#else ++ ++ } ++#endif + + return fdt_pack(fdt); + } +--- a/init/main.c ++++ b/init/main.c +@@ -102,6 +102,10 @@ + #define CREATE_TRACE_POINTS + #include <trace/events/initcall.h> + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#include <linux/of.h> ++#endif ++ + static int kernel_init(void *); + + extern void init_IRQ(void); +@@ -593,6 +597,18 @@ asmlinkage __visible void __init start_k + pr_notice("Kernel command line: %s\n", boot_command_line); + /* parameters may set static keys */ + jump_label_init(); ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //Show bootloader's original command line for reference ++ if(of_chosen) { ++ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); ++ if(prop) ++ pr_notice("Bootloader command line (ignored): %s\n", prop); ++ else ++ pr_notice("Bootloader command line not present\n"); ++ } ++#endif ++ + parse_early_param(); + after_dashes = parse_args("Booting kernel", + static_command_line, __start___param, diff --git a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch new file mode 100644 index 0000000000..77ce4c4245 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch @@ -0,0 +1,31 @@ +From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 11:03:18 +0100 +Subject: [PATCH 69/69] arm: boot: add dts files + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/arm/boot/dts/Makefile | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -791,6 +791,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ + qcom-ipq4019-ap.dk07.1-c2.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-c2600.dtb \ ++ qcom-ipq8064-d7800.dtb \ ++ qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ap161.dtb \ ++ qcom-ipq8064-ea8500.dtb \ ++ qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8064-wg2600hp.dtb \ ++ qcom-ipq8064-wpq864.dtb \ ++ qcom-ipq8064-wxr-2533dhp.dtb \ ++ qcom-ipq8065-nbg6817.dtb \ ++ qcom-ipq8065-r7800.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-fairphone-fp2.dtb \ diff --git a/target/linux/ipq806x/patches-5.4/0070-qcom-spm-fix-probe-order.patch b/target/linux/ipq806x/patches-5.4/0070-qcom-spm-fix-probe-order.patch new file mode 100644 index 0000000000..b7e375dfb2 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0070-qcom-spm-fix-probe-order.patch @@ -0,0 +1,16 @@ +Check for SCM availability before attempting to use SPM + +Signed-off-by: Felix Fietkau <nbd@nbd.name> + +--- a/drivers/soc/qcom/spm.c ++++ b/drivers/soc/qcom/spm.c +@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru + cpumask_t mask; + bool use_scm_power_down = false; + ++ if (!qcom_scm_is_available()) ++ return -EPROBE_DEFER; ++ + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) diff --git a/target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch new file mode 100644 index 0000000000..3a3e0a0000 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch @@ -0,0 +1,93 @@ +From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 18:44:49 +0530 +Subject: PCI: qcom: Fixed IPQ806x specific clocks + +Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -85,6 +85,8 @@ struct qcom_pcie_resources_2_1_0 { + struct clk *iface_clk; + struct clk *core_clk; + struct clk *phy_clk; ++ struct clk *aux_clk; ++ struct clk *ref_clk; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; +@@ -235,6 +237,14 @@ static int qcom_pcie_get_resources_2_1_0 + if (IS_ERR(res->phy_clk)) + return PTR_ERR(res->phy_clk); + ++ res->aux_clk = devm_clk_get(dev, "aux"); ++ if (IS_ERR(res->aux_clk)) ++ return PTR_ERR(res->aux_clk); ++ ++ res->ref_clk = devm_clk_get(dev, "ref"); ++ if (IS_ERR(res->ref_clk)) ++ return PTR_ERR(res->ref_clk); ++ + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); +@@ -267,6 +277,8 @@ static void qcom_pcie_deinit_2_1_0(struc + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); ++ clk_disable_unprepare(res->aux_clk); ++ clk_disable_unprepare(res->ref_clk); + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + } + +@@ -296,16 +308,28 @@ static int qcom_pcie_init_2_1_0(struct q + goto err_assert_ahb; + } + ++ ret = clk_prepare_enable(res->core_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable core clock\n"); ++ goto err_clk_core; ++ } ++ + ret = clk_prepare_enable(res->phy_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable phy clock\n"); + goto err_clk_phy; + } + +- ret = clk_prepare_enable(res->core_clk); ++ ret = clk_prepare_enable(res->aux_clk); + if (ret) { +- dev_err(dev, "cannot prepare/enable core clock\n"); +- goto err_clk_core; ++ dev_err(dev, "cannot prepare/enable aux clock\n"); ++ goto err_clk_aux; ++ } ++ ++ ret = clk_prepare_enable(res->ref_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable ref clock\n"); ++ goto err_clk_ref; + } + + ret = reset_control_deassert(res->ahb_reset); +@@ -361,10 +385,14 @@ static int qcom_pcie_init_2_1_0(struct q + return 0; + + err_deassert_ahb: +- clk_disable_unprepare(res->core_clk); +-err_clk_core: ++ clk_disable_unprepare(res->ref_clk); ++err_clk_ref: ++ clk_disable_unprepare(res->aux_clk); ++err_clk_aux: + clk_disable_unprepare(res->phy_clk); + err_clk_phy: ++ clk_disable_unprepare(res->core_clk); ++err_clk_core: + clk_disable_unprepare(res->iface_clk); + err_assert_ahb: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); diff --git a/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch new file mode 100644 index 0000000000..5bd865a42e --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch @@ -0,0 +1,62 @@ +From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 18:58:18 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes + +Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321 +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -92,6 +92,7 @@ struct qcom_pcie_resources_2_1_0 { + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *phy_reset; ++ struct reset_control *ext_reset; + struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; + }; + +@@ -261,6 +262,10 @@ static int qcom_pcie_get_resources_2_1_0 + if (IS_ERR(res->por_reset)) + return PTR_ERR(res->por_reset); + ++ res->ext_reset = devm_reset_control_get(dev, "ext"); ++ if (IS_ERR(res->ext_reset)) ++ return PTR_ERR(res->ext_reset); ++ + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); + } +@@ -274,6 +279,7 @@ static void qcom_pcie_deinit_2_1_0(struc + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->pci_reset); ++ reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); +@@ -290,15 +296,21 @@ static int qcom_pcie_init_2_1_0(struct q + u32 val; + int ret; + ++ ret = reset_control_assert(res->ahb_reset); ++ if (ret) { ++ dev_err(dev, "cannot assert ahb reset\n"); ++ return ret; ++ } ++ + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + +- ret = reset_control_assert(res->ahb_reset); ++ ret = reset_control_deassert(res->ext_reset); + if (ret) { +- dev_err(dev, "cannot assert ahb reset\n"); ++ dev_err(dev, "cannot assert ext reset\n"); + goto err_assert_ahb; + } + diff --git a/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch new file mode 100644 index 0000000000..dde8fbaa7b --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch @@ -0,0 +1,124 @@ +From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 19:58:22 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE init changes + +Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -45,7 +45,13 @@ + #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10 + + #define PCIE20_PARF_PHY_CTRL 0x40 ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16) ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16) ++ + #define PCIE20_PARF_PHY_REFCLK 0x4C ++#define REF_SSP_EN BIT(16) ++#define REF_USE_PAD BIT(12) ++ + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 + #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C + #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +@@ -76,6 +82,18 @@ + #define DBI_RO_WR_EN 1 + + #define PERST_DELAY_US 1000 ++/* PARF registers */ ++#define PCIE20_PARF_PCS_DEEMPH 0x34 ++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0) ++ ++#define PCIE20_PARF_PCS_SWING 0x38 ++#define PCS_SWING_TX_SWING_FULL(x) (x << 8) ++#define PCS_SWING_TX_SWING_LOW(x) (x << 0) ++ ++#define PCIE20_PARF_CONFIG_BITS 0x50 ++#define PHY_RX0_EQ(x) (x << 24) + + #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 + #define SLV_ADDR_SPACE_SZ 0x10000000 +@@ -94,6 +112,7 @@ struct qcom_pcie_resources_2_1_0 { + struct reset_control *phy_reset; + struct reset_control *ext_reset; + struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; ++ uint8_t phy_tx0_term_offset; + }; + + struct qcom_pcie_resources_1_0_0 { +@@ -173,6 +192,16 @@ struct qcom_pcie { + + #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) + ++static inline void ++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) ++{ ++ u32 val = readl(addr); ++ ++ val &= ~clear_mask; ++ val |= set_mask; ++ writel(val, addr); ++} ++ + static void qcom_ep_reset_assert(struct qcom_pcie *pcie) + { + gpiod_set_value_cansleep(pcie->reset, 1); +@@ -266,6 +295,10 @@ static int qcom_pcie_get_resources_2_1_0 + if (IS_ERR(res->ext_reset)) + return PTR_ERR(res->ext_reset); + ++ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset", ++ &res->phy_tx0_term_offset)) ++ res->phy_tx0_term_offset = 0; ++ + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); + } +@@ -293,7 +326,6 @@ static int qcom_pcie_init_2_1_0(struct q + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; +- u32 val; + int ret; + + ret = reset_control_assert(res->ahb_reset); +@@ -350,15 +382,26 @@ static int qcom_pcie_init_2_1_0(struct q + goto err_deassert_ahb; + } + +- /* enable PCIe clocks and resets */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); +- val &= ~BIT(0); +- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); +- +- /* enable external reference clock */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); +- val |= BIT(16); +- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); ++ ++ /* Set Tx termination offset */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset)); ++ ++ /* PARF programming */ ++ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), ++ pcie->parf + PCIE20_PARF_PCS_DEEMPH); ++ writel(PCS_SWING_TX_SWING_FULL(0x78) | ++ PCS_SWING_TX_SWING_LOW(0x78), ++ pcie->parf + PCIE20_PARF_PCS_SWING); ++ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS); ++ ++ /* Enable reference clock */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, ++ REF_USE_PAD, REF_SSP_EN); + + ret = reset_control_deassert(res->phy_reset); + if (ret) { diff --git a/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch new file mode 100644 index 0000000000..f6ebe0c0af --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch @@ -0,0 +1,112 @@ +From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 26 Jul 2016 12:28:31 +0530 +Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x + +Resolved PCIE EP detection errors caused due to missing iATU programming. + +Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -76,6 +76,30 @@ + #define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14) + #define PCIE_CAP_LINK1_VAL 0x2FD7F + ++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) ++ ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c ++ ++#define PCIE20_PLR_IATU_VIEWPORT 0x900 ++#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31) ++#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0) ++ ++#define PCIE20_PLR_IATU_CTRL1 0x904 ++#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0) ++#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0) ++ ++#define PCIE20_PLR_IATU_CTRL2 0x908 ++#define PCIE20_PLR_IATU_ENABLE BIT(31) ++ ++#define PCIE20_PLR_IATU_LBAR 0x90C ++#define PCIE20_PLR_IATU_UBAR 0x910 ++#define PCIE20_PLR_IATU_LAR 0x914 ++#define PCIE20_PLR_IATU_LTAR 0x918 ++#define PCIE20_PLR_IATU_UTAR 0x91c ++ ++#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 ++ + #define PCIE20_PARF_Q2A_FLUSH 0x1AC + + #define PCIE20_MISC_CONTROL_1_REG 0x8BC +@@ -240,6 +264,57 @@ static void qcom_pcie_2_1_0_ltssm_enable + writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); + } + ++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev) ++{ ++ struct pcie_port *pp = &pcie->pci->pp; ++ ++ /* ++ * program and enable address translation region 0 (device config ++ * address space); region type config; ++ * axi config address range to device config address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(0), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel((pp->cfg0_base + pp->cfg0_size - 1), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); ++} ++ ++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie) ++{ ++ struct pcie_port *pp = &pcie->pci->pp; ++ ++ /* ++ * program and enable address translation region 2 (device resource ++ * address space); region type memory; ++ * axi device bar address range to device bar address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(2), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel(pp->mem_base + pp->mem_size - 1, ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(upper_32_bits(pp->mem_bus_addr), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); ++ ++ /* 256B PCIE buffer setting */ ++ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); ++ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); ++} ++ + static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) + { + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; +@@ -437,6 +512,9 @@ static int qcom_pcie_init_2_1_0(struct q + writel(CFG_BRIDGE_SB_INIT, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); + ++ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); ++ qcom_pcie_prog_viewport_mem2_outbound(pcie); ++ + return 0; + + err_deassert_ahb: diff --git a/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch new file mode 100644 index 0000000000..c1461e68c2 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-6-PCI-qcom-Force-GEN1-support.patch @@ -0,0 +1,59 @@ +From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Wed, 7 Sep 2016 16:44:28 +0530 +Subject: PCI: qcom: Force GEN1 support + +Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0 +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -122,6 +122,8 @@ + #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 + #define SLV_ADDR_SPACE_SZ 0x10000000 + ++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 ++ + #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 + struct qcom_pcie_resources_2_1_0 { + struct clk *iface_clk; +@@ -212,6 +214,7 @@ struct qcom_pcie { + struct phy *phy; + struct gpio_desc *reset; + const struct qcom_pcie_ops *ops; ++ uint32_t force_gen1; + }; + + #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) +@@ -504,6 +507,11 @@ static int qcom_pcie_init_2_1_0(struct q + + /* wait for clock acquisition */ + usleep_range(1000, 1500); ++ if (pcie->force_gen1) { ++ writel_relaxed((readl_relaxed( ++ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1), ++ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); ++ } + + + /* Set the Max TLP size to 2K, instead of using default of 4K */ +@@ -1367,6 +1375,8 @@ static int qcom_pcie_probe(struct platfo + struct dw_pcie *pci; + struct qcom_pcie *pcie; + int ret; ++ uint32_t force_gen1 = 0; ++ struct device_node *np = pdev->dev.of_node; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) +@@ -1397,6 +1407,9 @@ static int qcom_pcie_probe(struct platfo + goto err_pm_runtime_put; + } + ++ of_property_read_u32(np, "force_gen1", &force_gen1); ++ pcie->force_gen1 = force_gen1; ++ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); + pcie->parf = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->parf)) { diff --git a/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch new file mode 100644 index 0000000000..e7b5b6f9af --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch @@ -0,0 +1,69 @@ +From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gpalan@codeaurora.org> +Date: Thu, 15 Dec 2016 17:38:18 +0530 +Subject: pcie: Set PCIE MRRS and MPS to 256B + +Set Max Read Request Size and Max Payload Size to 256 bytes, +per chip team recommendation. + +Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8 +Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +(limited to 'drivers/pci/host/pcie-qcom.c') + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -124,6 +124,14 @@ + + #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 + ++#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) ++#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1)) ++#define PCIE20_DEV_CAS 0x78 ++#define PCIE20_MRRS_MASK __mask(14, 12) ++#define PCIE20_MRRS(x) __set(x, 14, 12) ++#define PCIE20_MPS_MASK __mask(7, 5) ++#define PCIE20_MPS(x) __set(x, 7, 5) ++ + #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 + struct qcom_pcie_resources_2_1_0 { + struct clk *iface_clk; +@@ -1475,6 +1483,35 @@ err_pm_runtime_put: + return ret; + } + ++static void qcom_pcie_fixup_final(struct pci_dev *dev) ++{ ++ int cap, err; ++ u16 ctl, reg_val; ++ ++ cap = pci_pcie_cap(dev); ++ if (!cap) ++ return; ++ ++ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); ++ ++ if (err) ++ return; ++ ++ reg_val = ctl; ++ ++ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1) ++ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1); ++ ++ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1) ++ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1); ++ ++ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val); ++ ++ if (err) ++ pr_err("pcie config write failed %d\n", err); ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final); ++ + static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, + { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, diff --git a/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch new file mode 100644 index 0000000000..7cbeb3bed7 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch @@ -0,0 +1,91 @@ +From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Thu, 22 Dec 2016 11:18:45 +0530 +Subject: pcie: qcom: Fixed pcie_phy_clk branch issue + +Following backtraces are observed in PCIe deinit operation. + + Hardware name: Qualcomm (Flattened Device Tree) + (unwind_backtrace) from [] (show_stack+0x10/0x14) + (show_stack) from [] (dump_stack+0x84/0x98) + (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8) + (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) + (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120) + (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4) + (clk_core_disable) from [] (clk_disable+0x24/0x30) + (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8) + (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8) + (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538) + (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4) + +pcie_phy_clk is generated for PCIe controller itself and the +GCC controls its branch operation. This error is coming since +the assert operations turn off the parent clock before branch +clock. Now this patch moves clk_disable_unprepare before assert +operations. + +Similarly, during probe function, the clock branch operation +should be done after dessert operation. Currently, it does not +generate any error since bootloader enables the pcie_phy_clk +but the same error is coming during probe, if bootloader +disables pcie_phy_clk. + +Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -393,6 +393,7 @@ static void qcom_pcie_deinit_2_1_0(struc + { + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + ++ clk_disable_unprepare(res->phy_clk); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); +@@ -401,7 +402,6 @@ static void qcom_pcie_deinit_2_1_0(struc + reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); +- clk_disable_unprepare(res->phy_clk); + clk_disable_unprepare(res->aux_clk); + clk_disable_unprepare(res->ref_clk); + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +@@ -444,12 +444,6 @@ static int qcom_pcie_init_2_1_0(struct q + goto err_clk_core; + } + +- ret = clk_prepare_enable(res->phy_clk); +- if (ret) { +- dev_err(dev, "cannot prepare/enable phy clock\n"); +- goto err_clk_phy; +- } +- + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); +@@ -513,6 +507,12 @@ static int qcom_pcie_init_2_1_0(struct q + return ret; + } + ++ ret = clk_prepare_enable(res->phy_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable phy clock\n"); ++ goto err_deassert_ahb; ++ } ++ + /* wait for clock acquisition */ + usleep_range(1000, 1500); + if (pcie->force_gen1) { +@@ -538,8 +538,6 @@ err_deassert_ahb: + err_clk_ref: + clk_disable_unprepare(res->aux_clk); + err_clk_aux: +- clk_disable_unprepare(res->phy_clk); +-err_clk_phy: + clk_disable_unprepare(res->core_clk); + err_clk_core: + clk_disable_unprepare(res->iface_clk); diff --git a/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch new file mode 100644 index 0000000000..3fff78bfd4 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch @@ -0,0 +1,25 @@ +From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Thu, 22 Dec 2016 11:50:49 +0530 +Subject: pcie: qcom: change duplicate pci reset to phy reset + +The deinit issues reset_control_assert for pci twice and +does not contain phy reset. + +Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99 +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -394,7 +394,7 @@ static void qcom_pcie_deinit_2_1_0(struc + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + + clk_disable_unprepare(res->phy_clk); +- reset_control_assert(res->pci_reset); ++ reset_control_assert(res->phy_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); diff --git a/target/linux/ipq806x/patches-5.4/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-5.4/0072-add-ipq806x-with-no-clocks.patch new file mode 100644 index 0000000000..76c7cfd568 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0072-add-ipq806x-with-no-clocks.patch @@ -0,0 +1,12 @@ +--- a/drivers/firmware/qcom_scm.c ++++ b/drivers/firmware/qcom_scm.c +@@ -609,6 +609,9 @@ static const struct of_device_id qcom_sc + { .compatible = "qcom,scm-ipq4019", + .data = NULL, /* no clocks */ + }, ++ { .compatible = "qcom,scm-ipq806x", ++ .data = NULL, /* no clocks */ ++ }, + { .compatible = "qcom,scm", + .data = (void *)(SCM_HAS_CORE_CLK + | SCM_HAS_IFACE_CLK diff --git a/target/linux/ipq806x/patches-5.4/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-5.4/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch new file mode 100644 index 0000000000..78a5bb4173 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch @@ -0,0 +1,71 @@ +From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001 +From: Ajay Kishore <akisho@codeaurora.org> +Date: Tue, 24 Jan 2017 14:14:16 +0530 +Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps + +For IPQ806x targets, TZ protects the registers that are used to +configure the routing of interrupts to a target processor. +To resolve this, this patch uses scm call to route GPIO interrupts +to application processor. Also the scm call interface is changed. + +Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce +Signed-off-by: Ajay Kishore <akisho@codeaurora.org> +--- + +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -30,7 +30,8 @@ + #include <linux/reboot.h> + #include <linux/pm.h> + #include <linux/log2.h> +- ++#include <linux/qcom_scm.h> ++#include <linux/io.h> + #include "../core.h" + #include "../pinconf.h" + #include "pinctrl-msm.h" +@@ -628,6 +629,9 @@ static void msm_gpio_irq_mask(struct irq + const struct msm_pingroup *g; + unsigned long flags; + u32 val; ++ u32 addr; ++ int ret; ++ const __be32 *reg; + + g = &pctrl->soc->groups[d->hwirq]; + +@@ -732,11 +736,30 @@ static int msm_gpio_irq_set_type(struct + else + clear_bit(d->hwirq, pctrl->dual_edge_irqs); + ++ int ret = of_device_is_compatible(pctrl->dev->of_node, ++ "qcom,ipq8064-pinctrl"); + /* Route interrupts to application cpu */ +- val = readl(pctrl->regs + g->intr_target_reg); +- val &= ~(7 << g->intr_target_bit); +- val |= g->intr_target_kpss_val << g->intr_target_bit; +- writel(val, pctrl->regs + g->intr_target_reg); ++ if (!ret) { ++ val = readl(pctrl->regs + g->intr_target_reg); ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ writel(val, pctrl->regs + g->intr_target_reg); ++ } else { ++ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL); ++ if (reg) { ++ u32 addr = be32_to_cpup(reg) + g->intr_target_reg; ++ qcom_scm_io_readl(addr, &val); ++ __iormb(); ++ ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ ++ __iowmb(); ++ ret = qcom_scm_io_writel(addr, val); ++ if (ret) ++ pr_err("\n Routing interrupts to Apps proc failed"); ++ } ++ } + + /* Update configuration for gpio. + * RAW_STATUS_EN is left on for all gpio irqs. Due to the diff --git a/target/linux/ipq806x/patches-5.4/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch b/target/linux/ipq806x/patches-5.4/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch new file mode 100644 index 0000000000..2867239d1c --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch @@ -0,0 +1,50 @@ +From a3488aa9bed37c56e405967d44e821c484b5d6b9 Mon Sep 17 00:00:00 2001 +From: Ram Chandra Jangir <rjangir@codeaurora.org> +Date: Fri, 28 Sep 2018 15:19:50 +0530 +Subject: [PATCH] ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions + +Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org> +--- + drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c ++++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c +@@ -308,7 +308,7 @@ static const char * const gpio_groups[] + }; + + static const char * const mdio_groups[] = { +- "gpio0", "gpio1", "gpio10", "gpio11", ++ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66", + }; + + static const char * const mi2s_groups[] = { +@@ -412,8 +412,8 @@ static const char * const usb2_hsic_grou + }; + + static const char * const rgmii2_groups[] = { +- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", +- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", ++ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66", + }; + + static const char * const sata_groups[] = { +@@ -548,7 +548,7 @@ static const struct msm_function ipq8064 + static const struct msm_pingroup ipq8064_groups[] = { + PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), +- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA), ++ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA), +@@ -612,7 +612,7 @@ static const struct msm_pingroup ipq8064 + PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA), +- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), ++ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), + SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6), diff --git a/target/linux/ipq806x/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq806x/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch new file mode 100644 index 0000000000..1ab070bdab --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch @@ -0,0 +1,70 @@ +From patchwork Mon May 21 20:57:38 2018 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property +X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com> +X-Patchwork-Id: 917856 +Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com> +To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, + linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org +Cc: Bjorn Andersson <bjorn.andersson@linaro.org>, + Linus Walleij <linus.walleij@linaro.org>, + Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>, + Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, + Andy Gross <andy.gross@linaro.org>, + Sven Eckelmann <sven.eckelmann@openmesh.com> +Date: Mon, 21 May 2018 22:57:38 +0200 +From: Christian Lamparter <chunkeey@gmail.com> +List-Id: <linux-gpio.vger.kernel.org> + +This patch adds the gpio-ranges property to almost all of +the Qualcomm ARM platforms that utilize the pinctrl-msm +framework. + +The gpio-ranges property is part of the gpiolib subsystem. +As a result, the binding text is available in section +"2.1 gpio- and pin-controller interaction" of +Documentation/devicetree/bindings/gpio/gpio.txt + +For more information please see the patch titled: +"pinctrl: msm: fix gpio-hog related boot issues" from +this series. + +Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com> +Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] +Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Reviewed-by: Linus Walleij <linus.walleij@linaro.org> +--- +To help with git bisect, the DT update patch has been intentionally +placed after the "pinctrl: msm: fix gpio-hog related boot issues". +Otherwise - if the order was reveresed - and bisect decides to split +between these two patches, the gpiochip_add_pin_ranges() function +will be executed twice with the same parameters for the same pinctrl. +--- + arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++- + arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + + 13 files changed, 14 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -668,6 +668,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&qcom_pinmux 0 0 69>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; diff --git a/target/linux/ipq806x/patches-5.4/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-5.4/850-soc-add-qualcomm-syscon.patch new file mode 100644 index 0000000000..50414596d9 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/850-soc-add-qualcomm-syscon.patch @@ -0,0 +1,121 @@ +From: Christian Lamparter <chunkeey@googlemail.com> +Subject: SoC: add qualcomm syscon +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st + obj-$(CONFIG_QCOM_SMP2P) += smp2p.o + obj-$(CONFIG_QCOM_SMSM) += smsm.o + obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o + obj-$(CONFIG_QCOM_APR) += apr.o + obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o + obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -146,6 +146,13 @@ config QCOM_SMSM + Say yes here to support the Qualcomm Shared Memory State Machine. + The state machine is represented by bits in shared memory. + ++config QCOM_TCSR ++ tristate "QCOM Top Control and Status Registers" ++ depends on ARCH_QCOM ++ help ++ Say y here to enable TCSR support. The TCSR provides control ++ functions for various peripherals. ++ + config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM +--- /dev/null ++++ b/drivers/soc/qcom/qcom_tcsr.c +@@ -0,0 +1,64 @@ ++/* ++ * Copyright (c) 2014, The Linux foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License rev 2 and ++ * only rev 2 as published by the free Software foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_platform.h> ++#include <linux/platform_device.h> ++ ++#define TCSR_USB_PORT_SEL 0xb0 ++ ++static int tcsr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ const struct device_node *node = pdev->dev.of_node; ++ void __iomem *base; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { ++ dev_err(&pdev->dev, "setting usb port select = %d\n", val); ++ writel(val, base + TCSR_USB_PORT_SEL); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr", }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, tcsr_dt_match); ++ ++static struct platform_driver tcsr_driver = { ++ .driver = { ++ .name = "tcsr", ++ .owner = THIS_MODULE, ++ .of_match_table = tcsr_dt_match, ++ }, ++ .probe = tcsr_probe, ++}; ++ ++module_platform_driver(tcsr_driver); ++ ++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); ++MODULE_DESCRIPTION("QCOM TCSR driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/dt-bindings/soc/qcom,tcsr.h +@@ -0,0 +1,23 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __DT_BINDINGS_QCOM_TCSR_H ++#define __DT_BINDINGS_QCOM_TCSR_H ++ ++#define TCSR_USB_SELECT_USB3_P0 0x1 ++#define TCSR_USB_SELECT_USB3_P1 0x2 ++#define TCSR_USB_SELECT_USB3_DUAL 0x3 ++ ++/* TCSR A/B REG */ ++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 ++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 ++ ++#endif |