diff options
10 files changed, 143 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index cc426b74c6..f8e97875aa 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -55,6 +55,9 @@ get_status_led() { mofi3500-3gn) status_led="mofi3500-3gn:green:status" ;; + mpr-a1) + status_led="mpr-a1:red:power" + ;; mpr-a2) status_led="mpr-a2:red:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index b3ca002d09..9e9e09be3d 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -78,6 +78,7 @@ case "$FIRMWARE" in freestation5 | \ hw550-3g | \ mofi3500-3gn | \ + mpr-a1 | \ mpr-a2 | \ pwh2004 | \ nbg-419n | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 036d311d9b..7f69231da9 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -94,6 +94,9 @@ case $board in mofi3500-3gn) set_usb_led "mofi3500-3gn:green:usb" ;; + mpr-a1) + set_wifi_led "mpr-a1:blue:system" + ;; mpr-a2) set_wifi_led "mpr-a2:blue:system" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 2d833b31a6..6877588a45 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -173,6 +173,7 @@ ramips_setup_macs() broadway | \ dir-620-d1 | \ f5d8235-v1 | \ + mpr-a1 | \ mpr-a2 | \ mzk-w300nh2 | \ nw718 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 6f153aac46..aacec25fe3 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -26,6 +26,7 @@ preinit_set_mac_address() { dir-620-a1 |\ esr-9753 |\ freestation5 |\ + mpr-a1 | \ mpr-a2 | \ nw718 |\ psr-680w |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index cb6c10f76f..b1ecc8dfb9 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -118,6 +118,9 @@ ramips_board_detect() { *"MoFi Network MOFI3500-3GN") name="mofi3500-3gn" ;; + *"HAME MPR-A1") + name="mpr-a1" + ;; *"HAME MPR-A2") name="mpr-a2" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index ef2aa99690..1d867a73f5 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -45,6 +45,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ mofi3500-3gn | \ + mpr-a1 | \ mpr-a2 | \ mzk-w300nh2 | \ nbg-419n | \ diff --git a/target/linux/ramips/dts/MPRA1.dts b/target/linux/ramips/dts/MPRA1.dts new file mode 100644 index 0000000000..44363ef616 --- /dev/null +++ b/target/linux/ramips/dts/MPRA1.dts @@ -0,0 +1,117 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "MPRA1", "ralink,rt5350-soc"; + model = "HAME MPR-A1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "sdram"; + ralink,gpiomux = "jtag", "i2c", "mdio", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl064k"; + reg = <0 0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + system { + label = "mpr-a1:blue:system"; + gpios = <&gpio0 20 1>; + }; + power { + label = "mpr-a1:red:power"; + gpios = <&gpio0 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 7 0>; + }; + root_hub { + gpio-export,name = "root_hub"; + gpio-export,output = <1>; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 3ddf726ea4..04d68fe496 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -341,6 +341,7 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN) # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI +Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N) diff --git a/target/linux/ramips/rt305x/profiles/hame.mk b/target/linux/ramips/rt305x/profiles/hame.mk index 1a85be7ba3..3a607112dc 100644 --- a/target/linux/ramips/rt305x/profiles/hame.mk +++ b/target/linux/ramips/rt305x/profiles/hame.mk @@ -5,6 +5,18 @@ # See /LICENSE for more information. # +define Profile/MPRA1 + NAME:=HAME MPR-A1 + PACKAGES:=\ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net +endef + +define Profile/MPRA1/Description + Package set for HAME MPR-A1 board +endef + +$(eval $(call Profile,MPRA1)) + define Profile/MPRA2 NAME:=HAME MPR-A2 PACKAGES:=\ |