diff options
65 files changed, 13870 insertions, 0 deletions
diff --git a/target/linux/sunxi/config-4.1 b/target/linux/sunxi/config-4.1 new file mode 100644 index 0000000000..17fca75e9d --- /dev/null +++ b/target/linux/sunxi/config-4.1 @@ -0,0 +1,563 @@ +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_AHCI_SUNXI is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=416 +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARM=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_CRYPTO=y +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_PSCI=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATA=y +CONFIG_ATAGS=y +# CONFIG_ATA_SFF is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_AVERAGE=y +CONFIG_B53=y +# CONFIG_B53_MMAP_DRIVER is not set +CONFIG_B53_PHY_DRIVER=y +CONFIG_B53_PHY_FIXUP=y +# CONFIG_B53_SRAB_DRIVER is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_BINFMT_MISC=y +CONFIG_BLK_CGROUP=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_BOUNCE=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_BUILD_BIN2C=y +CONFIG_CACHE_L2X0=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_CGROUPS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_NET_CLASSID is not set +# CONFIG_CGROUP_PERF is not set +# CONFIG_CGROUP_SCHED is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2" +CONFIG_CMDLINE_FORCE=y +CONFIG_COMMON_CLK=y +CONFIG_COMPACTION=y +CONFIG_CONFIGFS_FS=y +CONFIG_CONNECTOR=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_COREDUMP=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUSETS=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRYPTO_ABLK_HELPER=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_AES_ARM=y +CONFIG_CRYPTO_AES_ARM_CE=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_SUN4I_SS=y +CONFIG_CRYPTO_GHASH_ARM_CE=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_ARM=y +CONFIG_CRYPTO_SHA1_ARM_CE=y +CONFIG_CRYPTO_SHA1_ARM_NEON=y +CONFIG_CRYPTO_SHA256_ARM=y +CONFIG_CRYPTO_SHA2_ARM_CE=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_SHA512_ARM_NEON=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DIRECT_IO=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_SUN6I=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DNOTIFY=y +CONFIG_DTC=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_DYNAMIC_DEBUG=y +# CONFIG_EEPROM_SUNXI_SID is not set +CONFIG_ELF_CORE=y +# CONFIG_EMBEDDED is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_EXT4_FS=y +CONFIG_FB=y +# CONFIG_FB_BIG_ENDIAN is not set +CONFIG_FB_BOTH_ENDIAN=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_CMDLINE=y +CONFIG_FB_FOREIGN_ENDIAN=y +# CONFIG_FB_LITTLE_ENDIAN is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FONT_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FRAME_WARN=2048 +CONFIG_FREEZER=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_HWMON=y +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_SUN6I_P2WI is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_IOMMU_HELPER=y +CONFIG_IOSCHED_CFQ=y +CONFIG_IPC_NS=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_JBD2=y +CONFIG_KALLSYMS=y +CONFIG_KEYBOARD_SUN4I_LRADC=y +CONFIG_KSM=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LIBFDT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_SUN4I=y +CONFIG_MACH_SUN5I=y +CONFIG_MACH_SUN6I=y +CONFIG_MACH_SUN7I=y +CONFIG_MACH_SUN8I=y +CONFIG_MACH_SUN9I=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_SUN4I=y +# CONFIG_MEMCG is not set +CONFIG_MFD_AXP20X=y +CONFIG_MFD_CORE=y +CONFIG_MFD_SUN6I_PRCM=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_SUNXI=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_SUNXI=y +CONFIG_MTD_OF_NAND_PARTS=y +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NAMESPACES=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +# CONFIG_NET_CLS_CGROUP is not set +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_NS=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_VENDOR_ALLWINNER=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_TOUCHSCREEN=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set +# CONFIG_PCI_SYSCALL is not set +CONFIG_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHY_SUN4I_USB=y +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINCTRL_SUN4I_A10=y +CONFIG_PINCTRL_SUN5I_A10S=y +CONFIG_PINCTRL_SUN5I_A13=y +CONFIG_PINCTRL_SUN6I_A31=y +CONFIG_PINCTRL_SUN6I_A31S=y +CONFIG_PINCTRL_SUN6I_A31_R=y +CONFIG_PINCTRL_SUN7I_A20=y +CONFIG_PINCTRL_SUN8I_A23=y +CONFIG_PINCTRL_SUN8I_A23_R=y +CONFIG_PINCTRL_SUN9I_A80=y +CONFIG_PINCTRL_SUNXI_COMMON=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PM=y +CONFIG_PM_CLK=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_POWER_RESET=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_RCU=y +CONFIG_PRINTK_TIME=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_PROC_EVENTS=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_PWM=y +CONFIG_PWM_SUN4I=y +CONFIG_PWM_SYSFS=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTA=y +CONFIG_QUOTACTL=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_RCU_BOOST is not set +CONFIG_RCU_STALL_COMMON=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_IRQ=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_RELAY=y +CONFIG_RESET_CONTROLLER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SATA_PMP=y +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y +CONFIG_SDIO_UART=y +CONFIG_SECURITYFS=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=8 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_SUN4I=y +CONFIG_SPI_SUN6I=y +CONFIG_SRCU=y +# CONFIG_STAGING is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_STOP_MACHINE=y +CONFIG_STRICT_DEVMEM=y +CONFIG_SUN4I_DMA=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_SUN4I_TIMER=y +CONFIG_SUN5I_HSTIMER=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SWCONFIG=y +CONFIG_SWIOTLB=y +CONFIG_SWP_EMULATE=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_TASK_XACCT=y +CONFIG_THERMAL=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_EMULATION is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TOUCHSCREEN_SUN4I=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_COMMON=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_DEBUG is not set +CONFIG_USB_DWC2_HOST=y +CONFIG_USB_DWC2_PLATFORM=y +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SUPPORT=y +CONFIG_USELIB=y +# CONFIG_USER_NS is not set +CONFIG_USE_OF=y +CONFIG_UTS_NS=y +CONFIG_VDSO=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch b/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch new file mode 100644 index 0000000000..33058fa0c0 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch @@ -0,0 +1,334 @@ +From f05be589ff32e87821b86845625ed3d402d37dc7 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Fri, 10 Apr 2015 12:09:01 +0800 +Subject: [PATCH] mfd: axp20x: Add AXP22x PMIC support + +Add support for the AXP22x PMIC devices to the existing AXP20x driver. +This includes the AXP221 and AXP223, which are identical except for +the external data bus. Only AXP221 is added for now. AXP223 will be +added after it's Reduced Serial Bus (RSB) interface is supported. + +AXP22x defines a new set of registers, power supplies and regulators, +but most of the API is similar to the AXP20x ones. + +A new irq chip definition is used, even though the available interrupts +on AXP22x is a subset of those on AXP20x. This is done so the interrupt +numbers match those on the datasheet. + +This patch only enables the interrupts, system power-off function, and PEK +sub-device. The regulator driver must first support different variants +before we enable it from the mfd driver. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +[wens@csie.org: fix interrupts and move regulators to separate patch] +Signed-off-by: Chen-Yu Tsai <wens@csie.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +--- + drivers/mfd/axp20x.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++ + include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 184 insertions(+) + +diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c +index d18029b..cfbb7d7 100644 +--- a/drivers/mfd/axp20x.c ++++ b/drivers/mfd/axp20x.c +@@ -32,6 +32,7 @@ + static const char * const axp20x_model_names[] = { + "AXP202", + "AXP209", ++ "AXP221", + "AXP288", + }; + +@@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = { + .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), + }; + ++static const struct regmap_range axp22x_writeable_ranges[] = { ++ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), ++ regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), ++}; ++ ++static const struct regmap_range axp22x_volatile_ranges[] = { ++ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), ++}; ++ ++static const struct regmap_access_table axp22x_writeable_table = { ++ .yes_ranges = axp22x_writeable_ranges, ++ .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), ++}; ++ ++static const struct regmap_access_table axp22x_volatile_table = { ++ .yes_ranges = axp22x_volatile_ranges, ++ .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), ++}; ++ + static const struct regmap_range axp288_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), +@@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = { + }, + }; + ++static struct resource axp22x_pek_resources[] = { ++ { ++ .name = "PEK_DBR", ++ .start = AXP22X_IRQ_PEK_RIS_EDGE, ++ .end = AXP22X_IRQ_PEK_RIS_EDGE, ++ .flags = IORESOURCE_IRQ, ++ }, { ++ .name = "PEK_DBF", ++ .start = AXP22X_IRQ_PEK_FAL_EDGE, ++ .end = AXP22X_IRQ_PEK_FAL_EDGE, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ + static struct resource axp288_fuel_gauge_resources[] = { + { + .start = AXP288_IRQ_QWBTU, +@@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = { + .cache_type = REGCACHE_RBTREE, + }; + ++static const struct regmap_config axp22x_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .wr_table = &axp22x_writeable_table, ++ .volatile_table = &axp22x_volatile_table, ++ .max_register = AXP22X_BATLOW_THRES1, ++ .cache_type = REGCACHE_RBTREE, ++}; ++ + static const struct regmap_config axp288_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +@@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), + }; + ++static const struct regmap_irq axp22x_regmap_irqs[] = { ++ INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), ++ INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), ++ INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), ++ INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), ++ INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), ++ INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), ++ INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), ++ INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), ++ INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), ++ INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), ++ INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), ++ INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), ++ INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), ++ INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), ++ INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), ++ INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), ++ INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), ++ INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), ++ INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), ++ INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), ++ INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), ++ INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), ++ INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), ++ INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), ++ INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), ++}; ++ + /* some IRQs are compatible with axp20x models */ + static const struct regmap_irq axp288_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), +@@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { + static const struct of_device_id axp20x_of_match[] = { + { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, + { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, ++ { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, + { }, + }; + MODULE_DEVICE_TABLE(of, axp20x_of_match); +@@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = { + + }; + ++static const struct regmap_irq_chip axp22x_regmap_irq_chip = { ++ .name = "axp22x_irq_chip", ++ .status_base = AXP20X_IRQ1_STATE, ++ .ack_base = AXP20X_IRQ1_STATE, ++ .mask_base = AXP20X_IRQ1_EN, ++ .mask_invert = true, ++ .init_ack_masked = true, ++ .irqs = axp22x_regmap_irqs, ++ .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), ++ .num_regs = 5, ++}; ++ + static const struct regmap_irq_chip axp288_regmap_irq_chip = { + .name = "axp288_irq_chip", + .status_base = AXP20X_IRQ1_STATE, +@@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = { + }, + }; + ++static struct mfd_cell axp22x_cells[] = { ++ { ++ .name = "axp20x-pek", ++ .num_resources = ARRAY_SIZE(axp22x_pek_resources), ++ .resources = axp22x_pek_resources, ++ }, ++}; ++ + static struct resource axp288_adc_resources[] = { + { + .name = "GPADC", +@@ -426,6 +518,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) + axp20x->regmap_cfg = &axp20x_regmap_config; + axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; + break; ++ case AXP221_ID: ++ axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); ++ axp20x->cells = axp22x_cells; ++ axp20x->regmap_cfg = &axp22x_regmap_config; ++ axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; ++ break; + case AXP288_ID: + axp20x->cells = axp288_cells; + axp20x->nr_cells = ARRAY_SIZE(axp288_cells); +diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h +index dfabd6d..95568eb 100644 +--- a/include/linux/mfd/axp20x.h ++++ b/include/linux/mfd/axp20x.h +@@ -14,6 +14,7 @@ + enum { + AXP202_ID = 0, + AXP209_ID, ++ AXP221_ID, + AXP288_ID, + NR_AXP20X_VARIANTS, + }; +@@ -45,6 +46,28 @@ enum { + #define AXP20X_V_LTF_DISCHRG 0x3c + #define AXP20X_V_HTF_DISCHRG 0x3d + ++#define AXP22X_PWR_OUT_CTRL1 0x10 ++#define AXP22X_PWR_OUT_CTRL2 0x12 ++#define AXP22X_PWR_OUT_CTRL3 0x13 ++#define AXP22X_DLDO1_V_OUT 0x15 ++#define AXP22X_DLDO2_V_OUT 0x16 ++#define AXP22X_DLDO3_V_OUT 0x17 ++#define AXP22X_DLDO4_V_OUT 0x18 ++#define AXP22X_ELDO1_V_OUT 0x19 ++#define AXP22X_ELDO2_V_OUT 0x1a ++#define AXP22X_ELDO3_V_OUT 0x1b ++#define AXP22X_DC5LDO_V_OUT 0x1c ++#define AXP22X_DCDC1_V_OUT 0x21 ++#define AXP22X_DCDC2_V_OUT 0x22 ++#define AXP22X_DCDC3_V_OUT 0x23 ++#define AXP22X_DCDC4_V_OUT 0x24 ++#define AXP22X_DCDC5_V_OUT 0x25 ++#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 ++#define AXP22X_ALDO1_V_OUT 0x28 ++#define AXP22X_ALDO2_V_OUT 0x29 ++#define AXP22X_ALDO3_V_OUT 0x2a ++#define AXP22X_CHRG_CTRL3 0x35 ++ + /* Interrupt */ + #define AXP20X_IRQ1_EN 0x40 + #define AXP20X_IRQ2_EN 0x41 +@@ -100,6 +123,9 @@ enum { + #define AXP20X_VBUS_MON 0x8b + #define AXP20X_OVER_TMP 0x8f + ++#define AXP22X_PWREN_CTRL1 0x8c ++#define AXP22X_PWREN_CTRL2 0x8d ++ + /* GPIO */ + #define AXP20X_GPIO0_CTRL 0x90 + #define AXP20X_LDO5_V_OUT 0x91 +@@ -108,6 +134,11 @@ enum { + #define AXP20X_GPIO20_SS 0x94 + #define AXP20X_GPIO3_CTRL 0x95 + ++#define AXP22X_LDO_IO0_V_OUT 0x91 ++#define AXP22X_LDO_IO1_V_OUT 0x93 ++#define AXP22X_GPIO_STATE 0x94 ++#define AXP22X_GPIO_PULL_DOWN 0x95 ++ + /* Battery */ + #define AXP20X_CHRG_CC_31_24 0xb0 + #define AXP20X_CHRG_CC_23_16 0xb1 +@@ -120,6 +151,9 @@ enum { + #define AXP20X_CC_CTRL 0xb8 + #define AXP20X_FG_RES 0xb9 + ++/* AXP22X specific registers */ ++#define AXP22X_BATLOW_THRES1 0xe6 ++ + /* AXP288 specific registers */ + #define AXP288_PMIC_ADC_H 0x56 + #define AXP288_PMIC_ADC_L 0x57 +@@ -158,6 +192,30 @@ enum { + AXP20X_REG_ID_MAX, + }; + ++enum { ++ AXP22X_DCDC1 = 0, ++ AXP22X_DCDC2, ++ AXP22X_DCDC3, ++ AXP22X_DCDC4, ++ AXP22X_DCDC5, ++ AXP22X_DC1SW, ++ AXP22X_DC5LDO, ++ AXP22X_ALDO1, ++ AXP22X_ALDO2, ++ AXP22X_ALDO3, ++ AXP22X_ELDO1, ++ AXP22X_ELDO2, ++ AXP22X_ELDO3, ++ AXP22X_DLDO1, ++ AXP22X_DLDO2, ++ AXP22X_DLDO3, ++ AXP22X_DLDO4, ++ AXP22X_RTC_LDO, ++ AXP22X_LDO_IO0, ++ AXP22X_LDO_IO1, ++ AXP22X_REG_ID_MAX, ++}; ++ + /* IRQs */ + enum { + AXP20X_IRQ_ACIN_OVER_V = 1, +@@ -199,6 +257,34 @@ enum { + AXP20X_IRQ_GPIO0_INPUT, + }; + ++enum axp22x_irqs { ++ AXP22X_IRQ_ACIN_OVER_V = 1, ++ AXP22X_IRQ_ACIN_PLUGIN, ++ AXP22X_IRQ_ACIN_REMOVAL, ++ AXP22X_IRQ_VBUS_OVER_V, ++ AXP22X_IRQ_VBUS_PLUGIN, ++ AXP22X_IRQ_VBUS_REMOVAL, ++ AXP22X_IRQ_VBUS_V_LOW, ++ AXP22X_IRQ_BATT_PLUGIN, ++ AXP22X_IRQ_BATT_REMOVAL, ++ AXP22X_IRQ_BATT_ENT_ACT_MODE, ++ AXP22X_IRQ_BATT_EXIT_ACT_MODE, ++ AXP22X_IRQ_CHARG, ++ AXP22X_IRQ_CHARG_DONE, ++ AXP22X_IRQ_BATT_TEMP_HIGH, ++ AXP22X_IRQ_BATT_TEMP_LOW, ++ AXP22X_IRQ_DIE_TEMP_HIGH, ++ AXP22X_IRQ_PEK_SHORT, ++ AXP22X_IRQ_PEK_LONG, ++ AXP22X_IRQ_LOW_PWR_LVL1, ++ AXP22X_IRQ_LOW_PWR_LVL2, ++ AXP22X_IRQ_TIMER, ++ AXP22X_IRQ_PEK_RIS_EDGE, ++ AXP22X_IRQ_PEK_FAL_EDGE, ++ AXP22X_IRQ_GPIO1_INPUT, ++ AXP22X_IRQ_GPIO0_INPUT, ++}; ++ + enum axp288_irqs { + AXP288_IRQ_VBUS_FALL = 2, + AXP288_IRQ_VBUS_RISE, diff --git a/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch b/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch new file mode 100644 index 0000000000..b49c969362 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch @@ -0,0 +1,279 @@ +From f95b73ba272eac5495e69e12795d5ea8bc81d2cd Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Fri, 10 Apr 2015 12:09:03 +0800 +Subject: [PATCH] regulator: axp20x: Prepare support for multiple AXP chip + families + +Rework the AXP20X_ macros and probe function to support the several chip +families, so that each family can define it's own set of regulators. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +[wens@csie.org: Support different DC-DC work frequency ranges] +Signed-off-by: Chen-Yu Tsai <wens@csie.org> +Reviewed-by: Mark Brown <broonie@kernel.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +--- + drivers/regulator/axp20x-regulator.c | 143 +++++++++++++++++++++++------------ + 1 file changed, 94 insertions(+), 49 deletions(-) + +diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c +index e4331f5..50ae0b5 100644 +--- a/drivers/regulator/axp20x-regulator.c ++++ b/drivers/regulator/axp20x-regulator.c +@@ -32,15 +32,15 @@ + + #define AXP20X_FREQ_DCDC_MASK 0x0f + +-#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ +- _ereg, _emask, _enable_val, _disable_val) \ +- [AXP20X_##_id] = { \ ++#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ ++ _vmask, _ereg, _emask, _enable_val, _disable_val) \ ++ [_family##_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ +- .id = AXP20X_##_id, \ ++ .id = _family##_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ +@@ -54,15 +54,15 @@ + .ops = &axp20x_ops, \ + } + +-#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ +- _ereg, _emask) \ +- [AXP20X_##_id] = { \ ++#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ ++ _vmask, _ereg, _emask) \ ++ [_family##_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ +- .id = AXP20X_##_id, \ ++ .id = _family##_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ +@@ -74,29 +74,29 @@ + .ops = &axp20x_ops, \ + } + +-#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \ +- [AXP20X_##_id] = { \ ++#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ ++ [_family##_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ +- .id = AXP20X_##_id, \ ++ .id = _family##_##_id, \ + .n_voltages = 1, \ + .owner = THIS_MODULE, \ + .min_uV = (_volt) * 1000, \ + .ops = &axp20x_ops_fixed \ + } + +-#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \ +- _emask) \ +- [AXP20X_##_id] = { \ ++#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ ++ _ereg, _emask) \ ++ [_family##_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ +- .id = AXP20X_##_id, \ ++ .id = _family##_##_id, \ + .n_voltages = ARRAY_SIZE(_table), \ + .owner = THIS_MODULE, \ + .vsel_reg = (_vreg), \ +@@ -136,37 +136,57 @@ static struct regulator_ops axp20x_ops = { + }; + + static const struct regulator_desc axp20x_regulators[] = { +- AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, +- 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), +- AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, +- 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), +- AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300), +- AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100, +- AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), +- AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, +- 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), +- AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, +- AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), +- AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100, +- AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, +- AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), ++ AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, ++ AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), ++ AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25, ++ AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), ++ AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300), ++ AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100, ++ AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), ++ AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, ++ AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), ++ AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, ++ AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), ++ AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, ++ AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, ++ AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), + }; + + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) + { + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); ++ u32 min, max, def, step; ++ ++ switch (axp20x->variant) { ++ case AXP202_ID: ++ case AXP209_ID: ++ min = 750; ++ max = 1875; ++ def = 1500; ++ step = 75; ++ break; ++ default: ++ dev_err(&pdev->dev, ++ "Setting DCDC frequency for unsupported AXP variant\n"); ++ return -EINVAL; ++ } ++ ++ if (dcdcfreq == 0) ++ dcdcfreq = def; + +- if (dcdcfreq < 750) { +- dcdcfreq = 750; +- dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); ++ if (dcdcfreq < min) { ++ dcdcfreq = min; ++ dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n", ++ min); + } + +- if (dcdcfreq > 1875) { +- dcdcfreq = 1875; +- dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); ++ if (dcdcfreq > max) { ++ dcdcfreq = max; ++ dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n", ++ max); + } + +- dcdcfreq = (dcdcfreq - 750) / 75; ++ dcdcfreq = (dcdcfreq - min) / step; + + return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, + AXP20X_FREQ_DCDC_MASK, dcdcfreq); +@@ -176,7 +196,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) + { + struct device_node *np, *regulators; + int ret; +- u32 dcdcfreq; ++ u32 dcdcfreq = 0; + + np = of_node_get(pdev->dev.parent->of_node); + if (!np) +@@ -186,7 +206,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) + if (!regulators) { + dev_warn(&pdev->dev, "regulators node not found\n"); + } else { +- dcdcfreq = 1500; + of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); + ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); + if (ret < 0) { +@@ -202,15 +221,27 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) + + static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) + { +- unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; ++ struct axp20x_dev *axp20x = rdev_get_drvdata(rdev); ++ unsigned int mask; + +- if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) +- return -EINVAL; ++ switch (axp20x->variant) { ++ case AXP202_ID: ++ case AXP209_ID: ++ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) ++ return -EINVAL; ++ ++ mask = AXP20X_WORKMODE_DCDC2_MASK; ++ if (id == AXP20X_DCDC3) ++ mask = AXP20X_WORKMODE_DCDC3_MASK; + +- if (id == AXP20X_DCDC3) +- mask = AXP20X_WORKMODE_DCDC3_MASK; ++ workmode <<= ffs(mask) - 1; ++ break; + +- workmode <<= ffs(mask) - 1; ++ default: ++ /* should not happen */ ++ WARN_ON(1); ++ return -EINVAL; ++ } + + return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); + } +@@ -219,22 +250,36 @@ static int axp20x_regulator_probe(struct platform_device *pdev) + { + struct regulator_dev *rdev; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); ++ const struct regulator_desc *regulators; + struct regulator_config config = { + .dev = pdev->dev.parent, + .regmap = axp20x->regmap, ++ .driver_data = axp20x, + }; +- int ret, i; ++ int ret, i, nregulators; + u32 workmode; + ++ switch (axp20x->variant) { ++ case AXP202_ID: ++ case AXP209_ID: ++ regulators = axp20x_regulators; ++ nregulators = AXP20X_REG_ID_MAX; ++ break; ++ default: ++ dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", ++ axp20x->variant); ++ return -EINVAL; ++ } ++ + /* This only sets the dcdc freq. Ignore any errors */ + axp20x_regulator_parse_dt(pdev); + +- for (i = 0; i < AXP20X_REG_ID_MAX; i++) { +- rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], ++ for (i = 0; i < nregulators; i++) { ++ rdev = devm_regulator_register(&pdev->dev, ®ulators[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register %s\n", +- axp20x_regulators[i].name); ++ regulators[i].name); + + return PTR_ERR(rdev); + } +@@ -245,7 +290,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) + if (!ret) { + if (axp20x_set_dcdc_workmode(rdev, i, workmode)) + dev_err(&pdev->dev, "Failed to set workmode on %s\n", +- axp20x_regulators[i].name); ++ rdev->desc->name); + } + } + diff --git a/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch b/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch new file mode 100644 index 0000000000..b2fdb65b34 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch @@ -0,0 +1,172 @@ +From c3f89434c9d778572cf09e8327bd047b11d48b90 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Fri, 10 Apr 2015 12:09:04 +0800 +Subject: [PATCH] regulator: axp20x: Add support for AXP22X regulators + +Add AXP22X regulator definitions and variant id associations. +This introduces a new "switch" type output for one of the regulators. +It is a switchable secondary output of one regulator, with the same +voltage level as the primary output. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +[wens@csie.org: Moved variant choosing to multi family support patch] +[wens@csie.org: Add dc-dc work frequency range] +[wens@csie.org: Add "switch" type output regulator DC1SW] +Signed-off-by: Chen-Yu Tsai <wens@csie.org> +Reviewed-by: Mark Brown <broonie@kernel.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +--- + drivers/regulator/axp20x-regulator.c | 96 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 96 insertions(+) + +diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c +index 50ae0b5..6468291 100644 +--- a/drivers/regulator/axp20x-regulator.c ++++ b/drivers/regulator/axp20x-regulator.c +@@ -27,8 +27,12 @@ + #define AXP20X_IO_ENABLED 0x03 + #define AXP20X_IO_DISABLED 0x07 + ++#define AXP22X_IO_ENABLED 0x04 ++#define AXP22X_IO_DISABLED 0x03 ++ + #define AXP20X_WORKMODE_DCDC2_MASK BIT(2) + #define AXP20X_WORKMODE_DCDC3_MASK BIT(1) ++#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x) + + #define AXP20X_FREQ_DCDC_MASK 0x0f + +@@ -74,6 +78,26 @@ + .ops = &axp20x_ops, \ + } + ++#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ ++ _vmask, _ereg, _emask) \ ++ [_family##_##_id] = { \ ++ .name = #_id, \ ++ .supply_name = (_supply), \ ++ .of_match = of_match_ptr(_match), \ ++ .regulators_node = of_match_ptr("regulators"), \ ++ .type = REGULATOR_VOLTAGE, \ ++ .id = _family##_##_id, \ ++ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ ++ .owner = THIS_MODULE, \ ++ .min_uV = (_min) * 1000, \ ++ .uV_step = (_step) * 1000, \ ++ .vsel_reg = (_vreg), \ ++ .vsel_mask = (_vmask), \ ++ .enable_reg = (_ereg), \ ++ .enable_mask = (_emask), \ ++ .ops = &axp20x_ops_sw, \ ++ } ++ + #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ + [_family##_##_id] = { \ + .name = #_id, \ +@@ -135,6 +159,14 @@ static struct regulator_ops axp20x_ops = { + .is_enabled = regulator_is_enabled_regmap, + }; + ++static struct regulator_ops axp20x_ops_sw = { ++ .get_voltage_sel = regulator_get_voltage_sel_regmap, ++ .list_voltage = regulator_list_voltage_linear, ++ .enable = regulator_enable_regmap, ++ .disable = regulator_disable_regmap, ++ .is_enabled = regulator_is_enabled_regmap, ++}; ++ + static const struct regulator_desc axp20x_regulators[] = { + AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, + AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), +@@ -152,6 +184,52 @@ static const struct regulator_desc axp20x_regulators[] = { + AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), + }; + ++static const struct regulator_desc axp22x_regulators[] = { ++ AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, ++ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)), ++ AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20, ++ AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)), ++ AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20, ++ AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), ++ AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20, ++ AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), ++ AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, ++ AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(4)), ++ /* secondary switchable output of DCDC1 */ ++ AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100, ++ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), ++ /* LDO regulator internally chained to DCDC5 */ ++ AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100, ++ AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), ++ AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100, ++ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), ++ AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100, ++ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)), ++ AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100, ++ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)), ++ AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100, ++ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), ++ AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100, ++ AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)), ++ AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100, ++ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), ++ AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100, ++ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)), ++ AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100, ++ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), ++ AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100, ++ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), ++ AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100, ++ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), ++ AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100, ++ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, ++ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), ++ AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100, ++ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, ++ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), ++ AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000), ++}; ++ + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) + { + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); +@@ -165,6 +243,12 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) + def = 1500; + step = 75; + break; ++ case AXP221_ID: ++ min = 1800; ++ max = 4050; ++ def = 3000; ++ step = 150; ++ break; + default: + dev_err(&pdev->dev, + "Setting DCDC frequency for unsupported AXP variant\n"); +@@ -237,6 +321,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work + workmode <<= ffs(mask) - 1; + break; + ++ case AXP221_ID: ++ if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5) ++ return -EINVAL; ++ ++ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1); ++ workmode <<= id - AXP22X_DCDC1; ++ break; ++ + default: + /* should not happen */ + WARN_ON(1); +@@ -265,6 +357,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) + regulators = axp20x_regulators; + nregulators = AXP20X_REG_ID_MAX; + break; ++ case AXP221_ID: ++ regulators = axp22x_regulators; ++ nregulators = AXP22X_REG_ID_MAX; ++ break; + default: + dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", + axp20x->variant); diff --git a/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch b/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch new file mode 100644 index 0000000000..eba960e0e2 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch @@ -0,0 +1,75 @@ +From 5469e15c9a0025e8822762ab9acfc3ee50e55c2c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= <bonbons@linux-vserver.org> +Date: Tue, 9 Jun 2015 08:30:48 +0200 +Subject: [PATCH] mfd: axp20x: Add missing registers, and mark more registers + volatile +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add an extra set of registers which is necessary tu support the PMICs +battery charger function, and mark registers which contain status bits, +gpio status, and adc readings as volatile. + +Cc: Bruno Prémont <bonbons@linux-vserver.org> +Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +Acked-by: Lee Jones <lee.jones@linaro.org> +Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> +--- +Changes in v2: +-Add a AXP20X_OCV_MAX define +Changes in v3: +-Add Bruno's S-o-b +--- + drivers/mfd/axp20x.c | 8 +++++++- + include/linux/mfd/axp20x.h | 6 ++++++ + 2 files changed, 13 insertions(+), 1 deletion(-) + +diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c +index b369cfc..8bd3283 100644 +--- a/drivers/mfd/axp20x.c ++++ b/drivers/mfd/axp20x.c +@@ -61,10 +61,16 @@ static const struct regmap_access_table axp152_volatile_table = { + static const struct regmap_range axp20x_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), ++ regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(15)), + }; + + static const struct regmap_range axp20x_volatile_ranges[] = { ++ regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS), ++ regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), ++ regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L), ++ regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL), ++ regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L), + }; + + static const struct regmap_access_table axp20x_writeable_table = { +@@ -195,7 +201,7 @@ static const struct regmap_config axp20x_regmap_config = { + .val_bits = 8, + .wr_table = &axp20x_writeable_table, + .volatile_table = &axp20x_volatile_table, +- .max_register = AXP20X_FG_RES, ++ .max_register = AXP20X_OCV(AXP20X_OCV_MAX), + .cache_type = REGCACHE_RBTREE, + }; + +diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h +index 52203d5..cc8ad1e 100644 +--- a/include/linux/mfd/axp20x.h ++++ b/include/linux/mfd/axp20x.h +@@ -190,6 +190,12 @@ enum { + #define AXP20X_CC_CTRL 0xb8 + #define AXP20X_FG_RES 0xb9 + ++/* OCV */ ++#define AXP20X_RDC_H 0xba ++#define AXP20X_RDC_L 0xbb ++#define AXP20X_OCV(m) (0xc0 + (m)) ++#define AXP20X_OCV_MAX 0xf ++ + /* AXP22X specific registers */ + #define AXP22X_BATLOW_THRES1 0xe6 + diff --git a/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch b/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch new file mode 100644 index 0000000000..0aa420c958 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch @@ -0,0 +1,28 @@ +From 6d4fa89dcd85e2427da83319ce75e5df5febcc96 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai <wens@csie.org> +Date: Fri, 10 Apr 2015 12:09:06 +0800 +Subject: [PATCH] mfd: axp20x: Enable AXP22X regulators + +Now that the axp20x-regulators driver supports different variants of the +AXP family, we can enable regulator support for AXP22X without the risk +of incorrectly configuring regulators. + +Signed-off-by: Chen-Yu Tsai <wens@csie.org> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +--- + drivers/mfd/axp20x.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c +index cfbb7d7..6df9155 100644 +--- a/drivers/mfd/axp20x.c ++++ b/drivers/mfd/axp20x.c +@@ -370,6 +370,8 @@ static struct mfd_cell axp22x_cells[] = { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp22x_pek_resources), + .resources = axp22x_pek_resources, ++ }, { ++ .name = "axp20x-regulator", + }, + }; + diff --git a/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch b/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch new file mode 100644 index 0000000000..da3867d0a8 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch @@ -0,0 +1,265 @@ +From a50e5abe10c95108ece5d3a91027570e66b5f238 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Sat, 11 Jul 2015 14:59:56 +0200 +Subject: [PATCH] mfd: axp20x: Add axp152 support + +The axp152 is a stripped down version of the axp202 pmic with the battery +charging function removed as it is intended for top-set boxes. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +Signed-off-by: Lee Jones <lee.jones@linaro.org> +--- + drivers/mfd/axp20x.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ + include/linux/mfd/axp20x.h | 61 +++++++++++++++++++++++++++++++++- + 2 files changed, 143 insertions(+), 1 deletion(-) + +diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c +index 8c2c3c4..b369cfc 100644 +--- a/drivers/mfd/axp20x.c ++++ b/drivers/mfd/axp20x.c +@@ -30,12 +30,34 @@ + #define AXP20X_OFF 0x80 + + static const char * const axp20x_model_names[] = { ++ "AXP152", + "AXP202", + "AXP209", + "AXP221", + "AXP288", + }; + ++static const struct regmap_range axp152_writeable_ranges[] = { ++ regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), ++ regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), ++}; ++ ++static const struct regmap_range axp152_volatile_ranges[] = { ++ regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), ++ regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), ++ regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), ++}; ++ ++static const struct regmap_access_table axp152_writeable_table = { ++ .yes_ranges = axp152_writeable_ranges, ++ .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), ++}; ++ ++static const struct regmap_access_table axp152_volatile_table = { ++ .yes_ranges = axp152_volatile_ranges, ++ .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), ++}; ++ + static const struct regmap_range axp20x_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), +@@ -93,6 +115,11 @@ static const struct regmap_access_table axp288_volatile_table = { + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), + }; + ++static struct resource axp152_pek_resources[] = { ++ DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"), ++ DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"), ++}; ++ + static struct resource axp20x_pek_resources[] = { + { + .name = "PEK_DBR", +@@ -154,6 +181,15 @@ static struct resource axp288_fuel_gauge_resources[] = { + }, + }; + ++static const struct regmap_config axp152_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .wr_table = &axp152_writeable_table, ++ .volatile_table = &axp152_volatile_table, ++ .max_register = AXP152_PWM1_DUTY_CYCLE, ++ .cache_type = REGCACHE_RBTREE, ++}; ++ + static const struct regmap_config axp20x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +@@ -184,6 +220,26 @@ static const struct regmap_config axp288_regmap_config = { + #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } + ++static const struct regmap_irq axp152_regmap_irqs[] = { ++ INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6), ++ INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5), ++ INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3), ++ INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2), ++ INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5), ++ INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4), ++ INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3), ++ INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2), ++ INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1), ++ INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0), ++ INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7), ++ INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6), ++ INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5), ++ INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3), ++ INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2), ++ INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1), ++ INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0), ++}; ++ + static const struct regmap_irq axp20x_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), +@@ -293,6 +349,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { + }; + + static const struct of_device_id axp20x_of_match[] = { ++ { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, + { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, + { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, + { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, +@@ -317,6 +374,18 @@ static const struct acpi_device_id axp20x_acpi_match[] = { + }; + MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); + ++static const struct regmap_irq_chip axp152_regmap_irq_chip = { ++ .name = "axp152_irq_chip", ++ .status_base = AXP152_IRQ1_STATE, ++ .ack_base = AXP152_IRQ1_STATE, ++ .mask_base = AXP152_IRQ1_EN, ++ .mask_invert = true, ++ .init_ack_masked = true, ++ .irqs = axp152_regmap_irqs, ++ .num_irqs = ARRAY_SIZE(axp152_regmap_irqs), ++ .num_regs = 3, ++}; ++ + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { + .name = "axp20x_irq_chip", + .status_base = AXP20X_IRQ1_STATE, +@@ -375,6 +444,14 @@ static struct mfd_cell axp22x_cells[] = { + }, + }; + ++static struct mfd_cell axp152_cells[] = { ++ { ++ .name = "axp20x-pek", ++ .num_resources = ARRAY_SIZE(axp152_pek_resources), ++ .resources = axp152_pek_resources, ++ }, ++}; ++ + static struct resource axp288_adc_resources[] = { + { + .name = "GPADC", +@@ -513,6 +590,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) + } + + switch (axp20x->variant) { ++ case AXP152_ID: ++ axp20x->nr_cells = ARRAY_SIZE(axp152_cells); ++ axp20x->cells = axp152_cells; ++ axp20x->regmap_cfg = &axp152_regmap_config; ++ axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; ++ break; + case AXP202_ID: + case AXP209_ID: + axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); +diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h +index c2aa853..52203d5 100644 +--- a/include/linux/mfd/axp20x.h ++++ b/include/linux/mfd/axp20x.h +@@ -12,7 +12,8 @@ + #define __LINUX_MFD_AXP20X_H + + enum { +- AXP202_ID = 0, ++ AXP152_ID = 0, ++ AXP202_ID, + AXP209_ID, + AXP221_ID, + AXP288_ID, +@@ -22,6 +23,24 @@ enum { + #define AXP20X_DATACACHE(m) (0x04 + (m)) + + /* Power supply */ ++#define AXP152_PWR_OP_MODE 0x01 ++#define AXP152_LDO3456_DC1234_CTRL 0x12 ++#define AXP152_ALDO_OP_MODE 0x13 ++#define AXP152_LDO0_CTRL 0x15 ++#define AXP152_DCDC2_V_OUT 0x23 ++#define AXP152_DCDC2_V_SCAL 0x25 ++#define AXP152_DCDC1_V_OUT 0x26 ++#define AXP152_DCDC3_V_OUT 0x27 ++#define AXP152_ALDO12_V_OUT 0x28 ++#define AXP152_DLDO1_V_OUT 0x29 ++#define AXP152_DLDO2_V_OUT 0x2a ++#define AXP152_DCDC4_V_OUT 0x2b ++#define AXP152_V_OFF 0x31 ++#define AXP152_OFF_CTRL 0x32 ++#define AXP152_PEK_KEY 0x36 ++#define AXP152_DCDC_FREQ 0x37 ++#define AXP152_DCDC_MODE 0x80 ++ + #define AXP20X_PWR_INPUT_STATUS 0x00 + #define AXP20X_PWR_OP_MODE 0x01 + #define AXP20X_USB_OTG_STATUS 0x02 +@@ -69,6 +88,13 @@ enum { + #define AXP22X_CHRG_CTRL3 0x35 + + /* Interrupt */ ++#define AXP152_IRQ1_EN 0x40 ++#define AXP152_IRQ2_EN 0x41 ++#define AXP152_IRQ3_EN 0x42 ++#define AXP152_IRQ1_STATE 0x48 ++#define AXP152_IRQ2_STATE 0x49 ++#define AXP152_IRQ3_STATE 0x4a ++ + #define AXP20X_IRQ1_EN 0x40 + #define AXP20X_IRQ2_EN 0x41 + #define AXP20X_IRQ3_EN 0x42 +@@ -127,6 +153,19 @@ enum { + #define AXP22X_PWREN_CTRL2 0x8d + + /* GPIO */ ++#define AXP152_GPIO0_CTRL 0x90 ++#define AXP152_GPIO1_CTRL 0x91 ++#define AXP152_GPIO2_CTRL 0x92 ++#define AXP152_GPIO3_CTRL 0x93 ++#define AXP152_LDOGPIO2_V_OUT 0x96 ++#define AXP152_GPIO_INPUT 0x97 ++#define AXP152_PWM0_FREQ_X 0x98 ++#define AXP152_PWM0_FREQ_Y 0x99 ++#define AXP152_PWM0_DUTY_CYCLE 0x9a ++#define AXP152_PWM1_FREQ_X 0x9b ++#define AXP152_PWM1_FREQ_Y 0x9c ++#define AXP152_PWM1_DUTY_CYCLE 0x9d ++ + #define AXP20X_GPIO0_CTRL 0x90 + #define AXP20X_LDO5_V_OUT 0x91 + #define AXP20X_GPIO1_CTRL 0x92 +@@ -218,6 +257,26 @@ enum { + + /* IRQs */ + enum { ++ AXP152_IRQ_LDO0IN_CONNECT = 1, ++ AXP152_IRQ_LDO0IN_REMOVAL, ++ AXP152_IRQ_ALDO0IN_CONNECT, ++ AXP152_IRQ_ALDO0IN_REMOVAL, ++ AXP152_IRQ_DCDC1_V_LOW, ++ AXP152_IRQ_DCDC2_V_LOW, ++ AXP152_IRQ_DCDC3_V_LOW, ++ AXP152_IRQ_DCDC4_V_LOW, ++ AXP152_IRQ_PEK_SHORT, ++ AXP152_IRQ_PEK_LONG, ++ AXP152_IRQ_TIMER, ++ AXP152_IRQ_PEK_RIS_EDGE, ++ AXP152_IRQ_PEK_FAL_EDGE, ++ AXP152_IRQ_GPIO3_INPUT, ++ AXP152_IRQ_GPIO2_INPUT, ++ AXP152_IRQ_GPIO1_INPUT, ++ AXP152_IRQ_GPIO0_INPUT, ++}; ++ ++enum { + AXP20X_IRQ_ACIN_OVER_V = 1, + AXP20X_IRQ_ACIN_PLUGIN, + AXP20X_IRQ_ACIN_REMOVAL, diff --git a/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch b/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch new file mode 100644 index 0000000000..4f22ce1395 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch @@ -0,0 +1,137 @@ +From 3282055a7d0a304d541dbdbe2e32167e1a2f117c Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:20:54 +0200 +Subject: [PATCH] mtd: nand: Take nand_ecc_ctrl initialization out of + nand_scan_tail + +Take ECC initialization code portion out of nand_scan_tail so that we can +re-use this implementation. + +This commit only moves some code around and makes no functional changes. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 91 +++++++++++++++++++++++++++----------------- + 1 file changed, 56 insertions(+), 35 deletions(-) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index c2e1232..f580ed1 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -3892,42 +3892,15 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) + return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; + } + +-/** +- * nand_scan_tail - [NAND Interface] Scan for the NAND device +- * @mtd: MTD device structure +- * +- * This is the second phase of the normal nand_scan() function. It fills out +- * all the uninitialized function pointers with the defaults and scans for a +- * bad block table if appropriate. ++/* ++ * Initialize ECC struct: ++ * - fill ECC struct with default function/values when these ones are undefined ++ * - fill ECC infos based on MTD device + */ +-int nand_scan_tail(struct mtd_info *mtd) ++static int nand_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc) + { + int i; +- struct nand_chip *chip = mtd->priv; +- struct nand_ecc_ctrl *ecc = &chip->ecc; +- struct nand_buffers *nbuf; +- +- /* New bad blocks should be marked in OOB, flash-based BBT, or both */ +- BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && +- !(chip->bbt_options & NAND_BBT_USE_FLASH)); +- +- if (!(chip->options & NAND_OWN_BUFFERS)) { +- nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize +- + mtd->oobsize * 3, GFP_KERNEL); +- if (!nbuf) +- return -ENOMEM; +- nbuf->ecccalc = (uint8_t *)(nbuf + 1); +- nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; +- nbuf->databuf = nbuf->ecccode + mtd->oobsize; + +- chip->buffers = nbuf; +- } else { +- if (!chip->buffers) +- return -ENOMEM; +- } +- +- /* Set the internal oob buffer location, just after the page data */ +- chip->oob_poi = chip->buffers->databuf + mtd->writesize; + + /* + * If no default placement scheme is given, select an appropriate one. +@@ -3953,9 +3926,6 @@ int nand_scan_tail(struct mtd_info *mtd) + } + } + +- if (!chip->write_page) +- chip->write_page = nand_write_page; +- + /* + * Check ECC mode, default to software if 3byte/512byte hardware ECC is + * selected and we have 256 byte pagesize fallback to software ECC +@@ -4125,6 +4095,57 @@ int nand_scan_tail(struct mtd_info *mtd) + } + ecc->total = ecc->steps * ecc->bytes; + ++ return 0; ++} ++ ++/** ++ * nand_scan_tail - [NAND Interface] Scan for the NAND device ++ * @mtd: MTD device structure ++ * ++ * This is the second phase of the normal nand_scan() function. It fills out ++ * all the uninitialized function pointers with the defaults and scans for a ++ * bad block table if appropriate. ++ */ ++int nand_scan_tail(struct mtd_info *mtd) ++{ ++ int ret; ++ struct nand_chip *chip = mtd->priv; ++ struct nand_ecc_ctrl *ecc = &chip->ecc; ++ struct nand_buffers *nbuf; ++ ++ /* New bad blocks should be marked in OOB, flash-based BBT, or both */ ++ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && ++ !(chip->bbt_options & NAND_BBT_USE_FLASH)); ++ ++ if (!(chip->options & NAND_OWN_BUFFERS)) { ++ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize ++ + mtd->oobsize * 3, GFP_KERNEL); ++ if (!nbuf) ++ return -ENOMEM; ++ nbuf->ecccalc = (uint8_t *)(nbuf + 1); ++ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; ++ nbuf->databuf = nbuf->ecccode + mtd->oobsize; ++ chip->buffers = nbuf; ++ } else { ++ if (!chip->buffers) ++ return -ENOMEM; ++ } ++ ++ /* Set the internal oob buffer location, just after the page data */ ++ chip->oob_poi = chip->buffers->databuf + mtd->writesize; ++ ++ if (!chip->write_page) ++ chip->write_page = nand_write_page; ++ ++ /* Initialize ECC struct */ ++ ret = nand_ecc_ctrl_init(mtd, ecc); ++ if (ret) { ++ if (!(chip->options & NAND_OWN_BUFFERS)) ++ kfree(chip->buffers); ++ ++ return ret; ++ } ++ + /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { + switch (ecc->steps) { diff --git a/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch b/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch new file mode 100644 index 0000000000..88e313dbb5 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch @@ -0,0 +1,1307 @@ +From a95cc309cf74eed3fc457dec3dcc44d9bf79e0e6 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 15:01:15 +0200 +Subject: [PATCH] mtd: nand: Add support for NAND partitions + +Add support for NAND partitions, and indirectly for per partition ECC +config, and also per partiton random seed support for the upcoming +randomizer support. + +This is necessary to be able to use different ECC / randomizer settings for +the parts of the NAND which are read directly by a bootrom (which has a +fixed ECC / random seed setting) and the generic data part of the NAND for +which we often want a stronger ECC and / or random seed. + +Provide helper functions to add/delete/allocate nand partitions. +NAND core code now make use of the partition specific nand_ecc_ctrl struct +(if available) when doing read/write operations. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/Kconfig | 4 + + drivers/mtd/nand/Makefile | 2 + + drivers/mtd/nand/nand_base.c | 712 +++++++++++++++++++++++++++++++++++-------- + drivers/mtd/nand/nand_bch.c | 16 +- + drivers/mtd/nand/nand_ecc.c | 4 +- + include/linux/mtd/nand.h | 38 +++ + 6 files changed, 635 insertions(+), 141 deletions(-) + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 5897d8d..8242470 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -22,6 +22,10 @@ menuconfig MTD_NAND + + if MTD_NAND + ++config MTD_OF_NAND_PARTS ++ tristate ++ default n ++ + config MTD_NAND_BCH + tristate + select BCH +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 582bbd05..fcbe032 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -53,4 +53,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ + obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o + obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o + ++obj-$(CONFIG_MTD_OF_NAND_PARTS) += ofnandpart.o ++ + nand-objs := nand_base.o nand_bbt.o nand_timings.o +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index f580ed1..a30b67f 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -1134,26 +1134,26 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) + { +- int eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; ++ int eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; + +- for (steps = chip->ecc.steps; steps > 0; steps--) { ++ for (steps = chip->cur_ecc->steps; steps > 0; steps--) { + chip->read_buf(mtd, buf, eccsize); + buf += eccsize; + +- if (chip->ecc.prepad) { +- chip->read_buf(mtd, oob, chip->ecc.prepad); +- oob += chip->ecc.prepad; ++ if (chip->cur_ecc->prepad) { ++ chip->read_buf(mtd, oob, chip->cur_ecc->prepad); ++ oob += chip->cur_ecc->prepad; + } + + chip->read_buf(mtd, oob, eccbytes); + oob += eccbytes; + +- if (chip->ecc.postpad) { +- chip->read_buf(mtd, oob, chip->ecc.postpad); +- oob += chip->ecc.postpad; ++ if (chip->cur_ecc->postpad) { ++ chip->read_buf(mtd, oob, chip->cur_ecc->postpad); ++ oob += chip->cur_ecc->postpad; + } + } + +@@ -1175,30 +1175,31 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, + static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + unsigned int max_bitflips = 0; + +- chip->ecc.read_page_raw(mtd, chip, buf, 1, page); ++ chip->cur_ecc->read_page_raw(mtd, chip, buf, 1, page); + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) +- chip->ecc.calculate(mtd, p, &ecc_calc[i]); ++ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + +- eccsteps = chip->ecc.steps; ++ eccsteps = chip->cur_ecc->steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + +- stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); ++ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], ++ &ecc_calc[i]); + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1223,7 +1224,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + int page) + { + int start_step, end_step, num_steps; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; +@@ -1232,16 +1233,16 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + unsigned int max_bitflips = 0; + + /* Column address within the page aligned to ECC size (256bytes) */ +- start_step = data_offs / chip->ecc.size; +- end_step = (data_offs + readlen - 1) / chip->ecc.size; ++ start_step = data_offs / chip->cur_ecc->size; ++ end_step = (data_offs + readlen - 1) / chip->cur_ecc->size; + num_steps = end_step - start_step + 1; +- index = start_step * chip->ecc.bytes; ++ index = start_step * chip->cur_ecc->bytes; + + /* Data size aligned to ECC ecc.size */ +- datafrag_len = num_steps * chip->ecc.size; +- eccfrag_len = num_steps * chip->ecc.bytes; ++ datafrag_len = num_steps * chip->cur_ecc->size; ++ eccfrag_len = num_steps * chip->cur_ecc->bytes; + +- data_col_addr = start_step * chip->ecc.size; ++ data_col_addr = start_step * chip->cur_ecc->size; + /* If we read not a page aligned data */ + if (data_col_addr != 0) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); +@@ -1250,8 +1251,9 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + chip->read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ +- for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) +- chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); ++ for (i = 0; i < eccfrag_len; ++ i += chip->cur_ecc->bytes, p += chip->cur_ecc->size) ++ chip->cur_ecc->calculate(mtd, p, &chip->buffers->ecccalc[i]); + + /* + * The performance is faster if we position offsets according to +@@ -1275,7 +1277,8 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + aligned_len = eccfrag_len; + if (eccpos[index] & (busw - 1)) + aligned_len++; +- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) ++ if (eccpos[index + (num_steps * chip->cur_ecc->bytes)] & ++ (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, +@@ -1287,11 +1290,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; + + p = bufpoi + data_col_addr; +- for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { ++ for (i = 0; i < eccfrag_len; ++ i += chip->cur_ecc->bytes, p += chip->cur_ecc->size) { + int stat; + +- stat = chip->ecc.correct(mtd, p, +- &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); ++ stat = chip->cur_ecc->correct(mtd, p, ++ &chip->buffers->ecccode[i], ++ &chip->buffers->ecccalc[i]); + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1315,32 +1320,33 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + unsigned int max_bitflips = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { +- chip->ecc.hwctl(mtd, NAND_ECC_READ); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); +- chip->ecc.calculate(mtd, p, &ecc_calc[i]); ++ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + } + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + +- eccsteps = chip->ecc.steps; ++ eccsteps = chip->cur_ecc->steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + +- stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); ++ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], ++ &ecc_calc[i]); + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1368,12 +1374,12 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + uint8_t *ecc_calc = chip->buffers->ecccalc; + unsigned int max_bitflips = 0; + +@@ -1382,17 +1388,17 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + +- chip->ecc.hwctl(mtd, NAND_ECC_READ); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); +- chip->ecc.calculate(mtd, p, &ecc_calc[i]); ++ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + +- stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); ++ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], NULL); + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1417,9 +1423,9 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + unsigned int max_bitflips = 0; +@@ -1427,17 +1433,17 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + +- chip->ecc.hwctl(mtd, NAND_ECC_READ); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + +- if (chip->ecc.prepad) { +- chip->read_buf(mtd, oob, chip->ecc.prepad); +- oob += chip->ecc.prepad; ++ if (chip->cur_ecc->prepad) { ++ chip->read_buf(mtd, oob, chip->cur_ecc->prepad); ++ oob += chip->cur_ecc->prepad; + } + +- chip->ecc.hwctl(mtd, NAND_ECC_READSYN); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_READSYN); + chip->read_buf(mtd, oob, eccbytes); +- stat = chip->ecc.correct(mtd, p, oob, NULL); ++ stat = chip->cur_ecc->correct(mtd, p, oob, NULL); + + if (stat < 0) { + mtd->ecc_stats.failed++; +@@ -1448,9 +1454,9 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + + oob += eccbytes; + +- if (chip->ecc.postpad) { +- chip->read_buf(mtd, oob, chip->ecc.postpad); +- oob += chip->ecc.postpad; ++ if (chip->cur_ecc->postpad) { ++ chip->read_buf(mtd, oob, chip->cur_ecc->postpad); ++ oob += chip->cur_ecc->postpad; + } + } + +@@ -1480,7 +1486,7 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, + return oob + len; + + case MTD_OPS_AUTO_OOB: { +- struct nand_oobfree *free = chip->ecc.layout->oobfree; ++ struct nand_oobfree *free = chip->cur_ecc->layout->oobfree; + uint32_t boffs = 0, roffs = ops->ooboffs; + size_t bytes = 0; + +@@ -1600,17 +1606,21 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, + * the read methods return max bitflips per ecc step. + */ + if (unlikely(ops->mode == MTD_OPS_RAW)) +- ret = chip->ecc.read_page_raw(mtd, chip, bufpoi, +- oob_required, +- page); ++ ret = chip->cur_ecc->read_page_raw(mtd, chip, ++ bufpoi, ++ oob_required, ++ page); + else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) && + !oob) +- ret = chip->ecc.read_subpage(mtd, chip, +- col, bytes, bufpoi, +- page); ++ ret = chip->cur_ecc->read_subpage(mtd, chip, ++ col, bytes, ++ bufpoi, ++ page); + else +- ret = chip->ecc.read_page(mtd, chip, bufpoi, +- oob_required, page); ++ ret = chip->cur_ecc->read_page(mtd, chip, ++ bufpoi, ++ oob_required, ++ page); + if (ret < 0) { + if (use_bufpoi) + /* Invalidate page cache */ +@@ -1746,6 +1756,39 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, + } + + /** ++ * nand_part_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @retlen: pointer to variable to store the number of read bytes ++ * @buf: the databuffer to put data ++ * ++ * Get hold of the chip and call nand_do_read. ++ */ ++static int nand_part_read(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, uint8_t *buf) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_part *part = to_nand_part(mtd); ++ struct mtd_oob_ops ops; ++ int ret; ++ ++ from += part->offset; ++ nand_get_device(part->master, FL_READING); ++ if (part->ecc) ++ chip->cur_ecc = part->ecc; ++ ops.len = len; ++ ops.datbuf = buf; ++ ops.oobbuf = NULL; ++ ops.mode = MTD_OPS_PLACE_OOB; ++ ret = nand_do_read_ops(part->master, from, &ops); ++ *retlen = ops.retlen; ++ chip->cur_ecc = &chip->ecc; ++ nand_release_device(part->master); ++ return ret; ++} ++ ++/** + * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function + * @mtd: mtd info structure + * @chip: nand chip info structure +@@ -1770,13 +1813,14 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + int page) + { + int length = mtd->oobsize; +- int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; +- int eccsize = chip->ecc.size; ++ int chunk = chip->cur_ecc->bytes + chip->cur_ecc->prepad + ++ chip->cur_ecc->postpad; ++ int eccsize = chip->cur_ecc->size; + uint8_t *bufpoi = chip->oob_poi; + int i, toread, sndrnd = 0, pos; + +- chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); +- for (i = 0; i < chip->ecc.steps; i++) { ++ chip->cmdfunc(mtd, NAND_CMD_READ0, chip->cur_ecc->size, page); ++ for (i = 0; i < chip->cur_ecc->steps; i++) { + if (sndrnd) { + pos = eccsize + i * (eccsize + chunk); + if (mtd->writesize > 512) +@@ -1829,9 +1873,10 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, + static int nand_write_oob_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, int page) + { +- int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; +- int eccsize = chip->ecc.size, length = mtd->oobsize; +- int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; ++ int chunk = chip->cur_ecc->bytes + chip->cur_ecc->prepad + ++ chip->cur_ecc->postpad; ++ int eccsize = chip->cur_ecc->size, length = mtd->oobsize; ++ int i, len, pos, status = 0, sndcmd = 0, steps = chip->cur_ecc->steps; + const uint8_t *bufpoi = chip->oob_poi; + + /* +@@ -1839,7 +1884,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, + * or + * data-pad-ecc-pad-data-pad .... ecc-pad-oob + */ +- if (!chip->ecc.prepad && !chip->ecc.postpad) { ++ if (!chip->cur_ecc->prepad && !chip->cur_ecc->postpad) { + pos = steps * (eccsize + chunk); + steps = 0; + } else +@@ -1903,7 +1948,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, + stats = mtd->ecc_stats; + + if (ops->mode == MTD_OPS_AUTO_OOB) +- len = chip->ecc.layout->oobavail; ++ len = chip->cur_ecc->layout->oobavail; + else + len = mtd->oobsize; + +@@ -1931,9 +1976,9 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, + + while (1) { + if (ops->mode == MTD_OPS_RAW) +- ret = chip->ecc.read_oob_raw(mtd, chip, page); ++ ret = chip->cur_ecc->read_oob_raw(mtd, chip, page); + else +- ret = chip->ecc.read_oob(mtd, chip, page); ++ ret = chip->cur_ecc->read_oob(mtd, chip, page); + + if (ret < 0) + break; +@@ -2021,6 +2066,56 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, + return ret; + } + ++/** ++ * nand_part_read_oob - [MTD Interface] NAND read data and/or out-of-band ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @ops: oob operation description structure ++ * ++ * NAND read data and/or out-of-band data. ++ */ ++static int nand_part_read_oob(struct mtd_info *mtd, loff_t from, ++ struct mtd_oob_ops *ops) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_part *part = to_nand_part(mtd); ++ int ret = -ENOTSUPP; ++ ++ ops->retlen = 0; ++ ++ /* Do not allow reads past end of device */ ++ if (ops->datbuf && (from + ops->len) > mtd->size) { ++ pr_debug("%s: attempt to read beyond end of device\n", ++ __func__); ++ return -EINVAL; ++ } ++ ++ from += part->offset; ++ nand_get_device(part->master, FL_READING); ++ if (part->ecc) ++ chip->cur_ecc = part->ecc; ++ ++ switch (ops->mode) { ++ case MTD_OPS_PLACE_OOB: ++ case MTD_OPS_AUTO_OOB: ++ case MTD_OPS_RAW: ++ break; ++ ++ default: ++ goto out; ++ } ++ ++ if (!ops->datbuf) ++ ret = nand_do_read_oob(part->master, from, ops); ++ else ++ ret = nand_do_read_ops(part->master, from, ops); ++ ++out: ++ chip->cur_ecc = &chip->ecc; ++ nand_release_device(part->master); ++ return ret; ++} ++ + + /** + * nand_write_page_raw - [INTERN] raw page write function +@@ -2054,26 +2149,26 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) + { +- int eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; ++ int eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; + +- for (steps = chip->ecc.steps; steps > 0; steps--) { ++ for (steps = chip->cur_ecc->steps; steps > 0; steps--) { + chip->write_buf(mtd, buf, eccsize); + buf += eccsize; + +- if (chip->ecc.prepad) { +- chip->write_buf(mtd, oob, chip->ecc.prepad); +- oob += chip->ecc.prepad; ++ if (chip->cur_ecc->prepad) { ++ chip->write_buf(mtd, oob, chip->cur_ecc->prepad); ++ oob += chip->cur_ecc->prepad; + } + + chip->write_buf(mtd, oob, eccbytes); + oob += eccbytes; + +- if (chip->ecc.postpad) { +- chip->write_buf(mtd, oob, chip->ecc.postpad); +- oob += chip->ecc.postpad; ++ if (chip->cur_ecc->postpad) { ++ chip->write_buf(mtd, oob, chip->cur_ecc->postpad); ++ oob += chip->cur_ecc->postpad; + } + } + +@@ -2093,21 +2188,21 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd, + static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + + /* Software ECC calculation */ + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) +- chip->ecc.calculate(mtd, p, &ecc_calc[i]); ++ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + +- return chip->ecc.write_page_raw(mtd, chip, buf, 1); ++ return chip->cur_ecc->write_page_raw(mtd, chip, buf, 1); + } + + /** +@@ -2120,20 +2215,20 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { +- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); +- chip->ecc.calculate(mtd, p, &ecc_calc[i]); ++ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + } + +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +@@ -2158,10 +2253,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + { + uint8_t *oob_buf = chip->oob_poi; + uint8_t *ecc_calc = chip->buffers->ecccalc; +- int ecc_size = chip->ecc.size; +- int ecc_bytes = chip->ecc.bytes; +- int ecc_steps = chip->ecc.steps; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ int ecc_size = chip->cur_ecc->size; ++ int ecc_bytes = chip->cur_ecc->bytes; ++ int ecc_steps = chip->cur_ecc->steps; ++ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + uint32_t start_step = offset / ecc_size; + uint32_t end_step = (offset + data_len - 1) / ecc_size; + int oob_bytes = mtd->oobsize / ecc_steps; +@@ -2169,7 +2264,7 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + + for (step = 0; step < ecc_steps; step++) { + /* configure controller for WRITE access */ +- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); + + /* write data (untouched subpages already masked by 0xFF) */ + chip->write_buf(mtd, buf, ecc_size); +@@ -2178,7 +2273,7 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + if ((step < start_step) || (step > end_step)) + memset(ecc_calc, 0xff, ecc_bytes); + else +- chip->ecc.calculate(mtd, buf, ecc_calc); ++ chip->cur_ecc->calculate(mtd, buf, ecc_calc); + + /* mask OOB of un-touched subpages by padding 0xFF */ + /* if oob_required, preserve OOB metadata of written subpage */ +@@ -2193,7 +2288,7 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; +- for (i = 0; i < chip->ecc.total; i++) ++ for (i = 0; i < chip->cur_ecc->total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + /* write OOB buffer to NAND device */ +@@ -2217,29 +2312,29 @@ static int nand_write_page_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) + { +- int i, eccsize = chip->ecc.size; +- int eccbytes = chip->ecc.bytes; +- int eccsteps = chip->ecc.steps; ++ int i, eccsize = chip->cur_ecc->size; ++ int eccbytes = chip->cur_ecc->bytes; ++ int eccsteps = chip->cur_ecc->steps; + const uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + +- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); ++ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); + +- if (chip->ecc.prepad) { +- chip->write_buf(mtd, oob, chip->ecc.prepad); +- oob += chip->ecc.prepad; ++ if (chip->cur_ecc->prepad) { ++ chip->write_buf(mtd, oob, chip->cur_ecc->prepad); ++ oob += chip->cur_ecc->prepad; + } + +- chip->ecc.calculate(mtd, p, oob); ++ chip->cur_ecc->calculate(mtd, p, oob); + chip->write_buf(mtd, oob, eccbytes); + oob += eccbytes; + +- if (chip->ecc.postpad) { +- chip->write_buf(mtd, oob, chip->ecc.postpad); +- oob += chip->ecc.postpad; ++ if (chip->cur_ecc->postpad) { ++ chip->write_buf(mtd, oob, chip->cur_ecc->postpad); ++ oob += chip->cur_ecc->postpad; + } + } + +@@ -2270,7 +2365,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + int status, subpage; + + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && +- chip->ecc.write_subpage) ++ chip->cur_ecc->write_subpage) + subpage = offset || (data_len < mtd->writesize); + else + subpage = 0; +@@ -2278,13 +2373,15 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + + if (unlikely(raw)) +- status = chip->ecc.write_page_raw(mtd, chip, buf, +- oob_required); ++ status = chip->cur_ecc->write_page_raw(mtd, chip, buf, ++ oob_required); + else if (subpage) +- status = chip->ecc.write_subpage(mtd, chip, offset, data_len, +- buf, oob_required); ++ status = chip->cur_ecc->write_subpage(mtd, chip, offset, ++ data_len, buf, ++ oob_required); + else +- status = chip->ecc.write_page(mtd, chip, buf, oob_required); ++ status = chip->cur_ecc->write_page(mtd, chip, buf, ++ oob_required); + + if (status < 0) + return status; +@@ -2343,7 +2440,7 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, + return oob + len; + + case MTD_OPS_AUTO_OOB: { +- struct nand_oobfree *free = chip->ecc.layout->oobfree; ++ struct nand_oobfree *free = chip->cur_ecc->layout->oobfree; + uint32_t boffs = 0, woffs = ops->ooboffs; + size_t bytes = 0; + +@@ -2539,6 +2636,46 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, + } + + /** ++ * panic_nand_part_write - [MTD Interface] NAND write with ECC ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @len: number of bytes to write ++ * @retlen: pointer to variable to store the number of written bytes ++ * @buf: the data to write ++ * ++ * NAND write with ECC. Used when performing writes in interrupt context, this ++ * may for example be called by mtdoops when writing an oops while in panic. ++ */ ++static int panic_nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const uint8_t *buf) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_part *part = to_nand_part(mtd); ++ struct mtd_oob_ops ops; ++ int ret; ++ ++ to += part->offset; ++ /* Wait for the device to get ready */ ++ panic_nand_wait(part->master, chip, 400); ++ ++ /* Grab the device */ ++ panic_nand_get_device(chip, part->master, FL_WRITING); ++ if (part->ecc) ++ chip->cur_ecc = part->ecc; ++ ++ ops.len = len; ++ ops.datbuf = (uint8_t *)buf; ++ ops.oobbuf = NULL; ++ ops.mode = MTD_OPS_PLACE_OOB; ++ ++ ret = nand_do_write_ops(part->master, to, &ops); ++ ++ chip->cur_ecc = &chip->ecc; ++ *retlen = ops.retlen; ++ return ret; ++} ++ ++/** + * nand_write - [MTD Interface] NAND write with ECC + * @mtd: MTD device structure + * @to: offset to write to +@@ -2566,6 +2703,39 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, + } + + /** ++ * nand_part_write - [MTD Interface] NAND write with ECC ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @len: number of bytes to write ++ * @retlen: pointer to variable to store the number of written bytes ++ * @buf: the data to write ++ * ++ * NAND write with ECC. ++ */ ++static int nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const uint8_t *buf) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_part *part = to_nand_part(mtd); ++ struct mtd_oob_ops ops; ++ int ret; ++ ++ to += part->offset; ++ nand_get_device(part->master, FL_WRITING); ++ if (part->ecc) ++ chip->cur_ecc = part->ecc; ++ ops.len = len; ++ ops.datbuf = (uint8_t *)buf; ++ ops.oobbuf = NULL; ++ ops.mode = MTD_OPS_PLACE_OOB; ++ ret = nand_do_write_ops(part->master, to, &ops); ++ *retlen = ops.retlen; ++ chip->cur_ecc = &chip->ecc; ++ nand_release_device(part->master); ++ return ret; ++} ++ ++/** + * nand_do_write_oob - [MTD Interface] NAND write out-of-band + * @mtd: MTD device structure + * @to: offset to write to +@@ -2583,7 +2753,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + __func__, (unsigned int)to, (int)ops->ooblen); + + if (ops->mode == MTD_OPS_AUTO_OOB) +- len = chip->ecc.layout->oobavail; ++ len = chip->cur_ecc->layout->oobavail; + else + len = mtd->oobsize; + +@@ -2637,9 +2807,11 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops); + + if (ops->mode == MTD_OPS_RAW) +- status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask); ++ status = chip->cur_ecc->write_oob_raw(mtd, chip, ++ page & chip->pagemask); + else +- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); ++ status = chip->cur_ecc->write_oob(mtd, chip, ++ page & chip->pagemask); + + chip->select_chip(mtd, -1); + +@@ -2694,6 +2866,54 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to, + } + + /** ++ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @ops: oob operation description structure ++ */ ++static int nand_part_write_oob(struct mtd_info *mtd, loff_t to, ++ struct mtd_oob_ops *ops) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_part *part = to_nand_part(mtd); ++ int ret = -ENOTSUPP; ++ ++ ops->retlen = 0; ++ ++ /* Do not allow writes past end of device */ ++ if (ops->datbuf && (to + ops->len) > mtd->size) { ++ pr_debug("%s: attempt to write beyond end of device\n", ++ __func__); ++ return -EINVAL; ++ } ++ ++ to += part->offset; ++ nand_get_device(part->master, FL_WRITING); ++ if (part->ecc) ++ chip->cur_ecc = part->ecc; ++ ++ switch (ops->mode) { ++ case MTD_OPS_PLACE_OOB: ++ case MTD_OPS_AUTO_OOB: ++ case MTD_OPS_RAW: ++ break; ++ ++ default: ++ goto out; ++ } ++ ++ if (!ops->datbuf) ++ ret = nand_do_write_oob(part->master, to, ops); ++ else ++ ret = nand_do_write_ops(part->master, to, ops); ++ ++out: ++ chip->cur_ecc = &chip->ecc; ++ nand_release_device(part->master); ++ return ret; ++} ++ ++/** + * single_erase - [GENERIC] NAND standard block erase command function + * @mtd: MTD device structure + * @page: the page address of the block which will be erased +@@ -2723,6 +2943,29 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) + } + + /** ++ * nand_part_erase - [MTD Interface] erase partition block(s) ++ * @mtd: MTD device structure ++ * @instr: erase instruction ++ * ++ * Erase one ore more blocks. ++ */ ++static int nand_part_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct nand_part *part = to_nand_part(mtd); ++ int ret; ++ ++ instr->addr += part->offset; ++ ret = nand_erase_nand(part->master, instr, 0); ++ if (ret) { ++ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) ++ instr->fail_addr -= part->offset; ++ instr->addr -= part->offset; ++ } ++ ++ return ret; ++} ++ ++/** + * nand_erase_nand - [INTERN] erase block(s) + * @mtd: MTD device structure + * @instr: erase instruction +@@ -2864,6 +3107,18 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) + } + + /** ++ * nand_part_block_isbad - [MTD Interface] Check if block at offset is bad ++ * @mtd: MTD device structure ++ * @offs: offset relative to mtd start ++ */ ++static int nand_part_block_isbad(struct mtd_info *mtd, loff_t offs) ++{ ++ struct nand_part *part = to_nand_part(mtd); ++ ++ return nand_block_checkbad(part->master, part->offset + offs, 1, 0); ++} ++ ++/** + * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad + * @mtd: MTD device structure + * @ofs: offset relative to mtd start +@@ -2884,6 +3139,33 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) + } + + /** ++ * nand_part_block_markbad - [MTD Interface] Mark block at the given offset as ++ * bad ++ * @mtd: MTD device structure ++ * @ofs: offset relative to mtd start ++ */ ++static int nand_part_block_markbad(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_part *part = to_nand_part(mtd); ++ int ret; ++ ++ ofs += part->offset; ++ ret = nand_block_isbad(part->master, ofs); ++ if (ret) { ++ /* If it was bad already, return success and do nothing */ ++ if (ret > 0) ++ return 0; ++ return ret; ++ } ++ ++ ret = nand_block_markbad_lowlevel(part->master, ofs); ++ if (!ret) ++ mtd->ecc_stats.badblocks++; ++ ++ return ret; ++} ++ ++/** + * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand + * @mtd: MTD device structure + * @chip: nand chip info structure +@@ -4099,6 +4381,169 @@ static int nand_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc) + } + + /** ++ * nand_add_partition - [NAND Interface] Add a NAND partition to a NAND device ++ * @master: MTD device structure representing the NAND device ++ * @part: NAND partition to add to the NAND device ++ * ++ * Adds a NAND partition to a NAND device. ++ * The NAND partition cannot overlap with another existing partition. ++ * ++ * Returns zero in case of success and a negative error code in case of failure. ++ */ ++int nand_add_partition(struct mtd_info *master, struct nand_part *part) ++{ ++ struct nand_chip *chip = master->priv; ++ struct mtd_info *mtd = &part->mtd; ++ struct nand_ecc_ctrl *ecc = part->ecc; ++ struct nand_part *pos; ++ bool inserted = false; ++ int ret; ++ ++ /* set up the MTD object for this partition */ ++ mtd->type = master->type; ++ mtd->flags = master->flags & ~mtd->flags; ++ mtd->writesize = master->writesize; ++ mtd->writebufsize = master->writebufsize; ++ mtd->oobsize = master->oobsize; ++ mtd->oobavail = master->oobavail; ++ mtd->subpage_sft = master->subpage_sft; ++ mtd->erasesize = master->erasesize; ++ ++ mtd->priv = chip; ++ mtd->owner = master->owner; ++ mtd->backing_dev_info = master->backing_dev_info; ++ ++ mtd->dev.parent = master->dev.parent; ++ ++ if (ecc) { ++ ret = nand_ecc_ctrl_init(mtd, ecc); ++ if (ret) ++ return ret; ++ } else { ++ ecc = &chip->ecc; ++ } ++ ++ mtd->_erase = nand_part_erase; ++ mtd->_point = NULL; ++ mtd->_unpoint = NULL; ++ mtd->_read = nand_part_read; ++ mtd->_write = nand_part_write; ++ mtd->_panic_write = panic_nand_part_write; ++ mtd->_read_oob = nand_part_read_oob; ++ mtd->_write_oob = nand_part_write_oob; ++ mtd->_sync = nand_sync; ++ mtd->_lock = NULL; ++ mtd->_unlock = NULL; ++ mtd->_suspend = nand_suspend; ++ mtd->_resume = nand_resume; ++ mtd->_block_isbad = nand_part_block_isbad; ++ mtd->_block_markbad = nand_part_block_markbad; ++ ++ /* propagate ecc info to mtd_info */ ++ mtd->ecclayout = ecc->layout; ++ mtd->ecc_strength = ecc->strength; ++ mtd->ecc_step_size = ecc->size; ++ /* ++ * Initialize bitflip_threshold to its default prior scan_bbt() call. ++ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be ++ * properly set. ++ */ ++ if (!mtd->bitflip_threshold) ++ mtd->bitflip_threshold = mtd->ecc_strength; ++ ++ part->master = master; ++ ++ mutex_lock(&chip->part_lock); ++ list_for_each_entry(pos, &chip->partitions, node) { ++ if (part->offset >= pos->offset + pos->mtd.size) { ++ continue; ++ } else if (part->offset + mtd->size > pos->offset) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ list_add(&part->node, pos->node.prev); ++ inserted = true; ++ break; ++ } ++ ++ if (!inserted) ++ list_add_tail(&part->node, &chip->partitions); ++ ++ ret = mtd_device_register(mtd, NULL, 0); ++ if (ret) { ++ list_del(&part->node); ++ goto out; ++ } ++ ++ if (master->_block_isbad) { ++ uint64_t offs = 0; ++ ++ while (offs < mtd->size) { ++ if (mtd_block_isreserved(master, offs + part->offset)) ++ mtd->ecc_stats.bbtblocks++; ++ else if (mtd_block_isbad(master, offs + part->offset)) ++ mtd->ecc_stats.badblocks++; ++ offs += mtd->erasesize; ++ } ++ } ++ ++out: ++ mutex_unlock(&chip->part_lock); ++ return ret; ++} ++EXPORT_SYMBOL(nand_add_partition); ++ ++/** ++ * nand_del_partition - [NAND Interface] Delete a NAND part from a NAND dev ++ * @part: NAND partition to delete ++ * ++ * Deletes a NAND partition from a NAND device. ++ */ ++void nand_del_partition(struct nand_part *part) ++{ ++ struct nand_chip *chip = part->mtd.priv; ++ ++ mutex_lock(&chip->part_lock); ++ mtd_device_unregister(&part->mtd); ++ list_del(&part->node); ++ mutex_unlock(&chip->part_lock); ++ ++ if (part->ecc && part->ecc->mode == NAND_ECC_SOFT_BCH) ++ nand_bch_free((struct nand_bch_control *)part->ecc->priv); ++ ++ if (part->release) ++ part->release(part); ++} ++EXPORT_SYMBOL(nand_del_partition); ++ ++/* ++ * NAND part release function. Used by nandpart_alloc as its release function. ++ */ ++static void nandpart_release(struct nand_part *part) ++{ ++ kfree(part); ++} ++ ++/** ++ * nandpart_alloc - [NAND Interface] Allocate a NAND part struct ++ * ++ * Allocate a NAND partition and assign the nandpart release function. ++ * This nand_part struct must be filled before passing it to the ++ * nand_add_partition function. ++ */ ++struct nand_part *nandpart_alloc(void) ++{ ++ struct nand_part *part = kzalloc(sizeof(*part), GFP_KERNEL); ++ if (!part) ++ return ERR_PTR(-ENOMEM); ++ part->release = nandpart_release; ++ ++ return part; ++} ++EXPORT_SYMBOL(nandpart_alloc); ++ ++/** + * nand_scan_tail - [NAND Interface] Scan for the NAND device + * @mtd: MTD device structure + * +@@ -4146,6 +4591,11 @@ int nand_scan_tail(struct mtd_info *mtd) + return ret; + } + ++ INIT_LIST_HEAD(&chip->partitions); ++ mutex_init(&chip->part_lock); ++ ++ chip->cur_ecc = &chip->ecc; ++ + /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { + switch (ecc->steps) { +diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c +index 3803e0b..b82b976 100644 +--- a/drivers/mtd/nand/nand_bch.c ++++ b/drivers/mtd/nand/nand_bch.c +@@ -53,14 +53,14 @@ int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, + unsigned char *code) + { + const struct nand_chip *chip = mtd->priv; +- struct nand_bch_control *nbc = chip->ecc.priv; ++ struct nand_bch_control *nbc = chip->cur_ecc->priv; + unsigned int i; + +- memset(code, 0, chip->ecc.bytes); +- encode_bch(nbc->bch, buf, chip->ecc.size, code); ++ memset(code, 0, chip->cur_ecc->bytes); ++ encode_bch(nbc->bch, buf, chip->cur_ecc->size, code); + + /* apply mask so that an erased page is a valid codeword */ +- for (i = 0; i < chip->ecc.bytes; i++) ++ for (i = 0; i < chip->cur_ecc->bytes; i++) + code[i] ^= nbc->eccmask[i]; + + return 0; +@@ -80,15 +80,15 @@ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) + { + const struct nand_chip *chip = mtd->priv; +- struct nand_bch_control *nbc = chip->ecc.priv; ++ struct nand_bch_control *nbc = chip->cur_ecc->priv; + unsigned int *errloc = nbc->errloc; + int i, count; + +- count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc, +- NULL, errloc); ++ count = decode_bch(nbc->bch, NULL, chip->cur_ecc->size, read_ecc, ++ calc_ecc, NULL, errloc); + if (count > 0) { + for (i = 0; i < count; i++) { +- if (errloc[i] < (chip->ecc.size*8)) ++ if (errloc[i] < (chip->cur_ecc->size*8)) + /* error is located in data, correct it */ + buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7)); + /* else error in ecc, no action needed */ +diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c +index 97c4c02..f35c418 100644 +--- a/drivers/mtd/nand/nand_ecc.c ++++ b/drivers/mtd/nand/nand_ecc.c +@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, + unsigned char *code) + { + __nand_calculate_ecc(buf, +- ((struct nand_chip *)mtd->priv)->ecc.size, code); ++ ((struct nand_chip *)mtd->priv)->cur_ecc->size, code); + + return 0; + } +@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) + { + return __nand_correct_data(buf, read_ecc, calc_ecc, +- ((struct nand_chip *)mtd->priv)->ecc.size); ++ ((struct nand_chip *)mtd->priv)->cur_ecc->size); + } + EXPORT_SYMBOL(nand_correct_data); + +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 3d4ea7e..510e09b 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -708,6 +708,7 @@ struct nand_chip { + struct nand_hw_control *controller; + + struct nand_ecc_ctrl ecc; ++ struct nand_ecc_ctrl *cur_ecc; + struct nand_buffers *buffers; + struct nand_hw_control hwcontrol; + +@@ -717,9 +718,46 @@ struct nand_chip { + + struct nand_bbt_descr *badblock_pattern; + ++ struct list_head partitions; ++ struct mutex part_lock; ++ + void *priv; + }; + ++/** ++ * struct nand_part - NAND partition structure ++ * @node: list node used to attach the partition to its NAND dev ++ * @mtd: MTD partiton info ++ * @master: MTD device representing the NAND chip ++ * @offset: partition offset ++ * @ecc: partition specific ECC struct ++ * @release: function used to release this nand_part struct ++ * ++ * NAND partitions work as standard MTD partitions except it can override ++ * NAND chip ECC handling. ++ * This is particularly useful for SoCs that need specific ECC configs to boot ++ * from NAND while these ECC configs do not fit the NAND chip ECC requirements. ++ */ ++struct nand_part { ++ struct list_head node; ++ struct mtd_info mtd; ++ struct mtd_info *master; ++ uint64_t offset; ++ struct nand_ecc_ctrl *ecc; ++ void (*release)(struct nand_part *part); ++}; ++ ++static inline struct nand_part *to_nand_part(struct mtd_info *mtd) ++{ ++ return container_of(mtd, struct nand_part, mtd); ++} ++ ++int nand_add_partition(struct mtd_info *master, struct nand_part *part); ++ ++void nand_del_partition(struct nand_part *part); ++ ++struct nand_part *nandpart_alloc(void); ++ + /* + * NAND Flash Manufacturer ID Codes + */ diff --git a/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch b/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch new file mode 100644 index 0000000000..135f50a5cb --- /dev/null +++ b/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch @@ -0,0 +1,157 @@ +From 0460e9868fd82a3675db02f6ceb6edfd8501c194 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:31:42 +0200 +Subject: [PATCH] mtd: nand: Add DT NAND partition parser + +Add a of_nandpart_parse function to help parsing NAND partitions from DT. +This function should be called from NAND controller drivers just after the +nand_scan_tail in place of mtd_device_parse_register. +The caller can specify a parser function to retrieve HW specific +informations from the DT. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/ofnandpart.c | 104 ++++++++++++++++++++++++++++++++++++++++++ + include/linux/mtd/nand.h | 17 +++++++ + 2 files changed, 121 insertions(+) + create mode 100644 drivers/mtd/nand/ofnandpart.c + +diff --git a/drivers/mtd/nand/ofnandpart.c b/drivers/mtd/nand/ofnandpart.c +new file mode 100644 +index 0000000..293daee +--- /dev/null ++++ b/drivers/mtd/nand/ofnandpart.c +@@ -0,0 +1,104 @@ ++/* ++ * NAND Flash partitions described by the OF (or flattened) device tree ++ * ++ * Copyright © 2014 Boris BREZILLON <b.brezillon.dev@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/of.h> ++#include <linux/mtd/mtd.h> ++#include <linux/slab.h> ++#include <linux/mtd/nand.h> ++ ++static inline bool node_has_compatible(struct device_node *pp) ++{ ++ return of_get_property(pp, "compatible", NULL); ++} ++ ++int ofnandpart_parse(struct mtd_info *master, ++ const struct ofnandpart_data *data) ++{ ++ struct device_node *node; ++ const char *partname; ++ struct device_node *pp; ++ int i; ++ ++ if (!data) ++ return 0; ++ ++ node = data->node; ++ if (!node) ++ return 0; ++ ++ i = 0; ++ for_each_child_of_node(node, pp) { ++ const __be32 *reg; ++ int len; ++ int a_cells, s_cells; ++ uint64_t offset, size; ++ uint32_t mask_flags = 0; ++ struct nand_part *part; ++ ++ if (node_has_compatible(pp)) ++ continue; ++ ++ reg = of_get_property(pp, "reg", &len); ++ if (!reg) ++ continue; ++ ++ a_cells = of_n_addr_cells(pp); ++ s_cells = of_n_size_cells(pp); ++ offset = of_read_number(reg, a_cells); ++ size = of_read_number(reg + a_cells, s_cells); ++ ++ partname = of_get_property(pp, "label", &len); ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ ++ if (of_get_property(pp, "read-only", &len)) ++ mask_flags |= MTD_WRITEABLE; ++ ++ if (of_get_property(pp, "lock", &len)) ++ mask_flags |= MTD_POWERUP_LOCK; ++ ++ if (data->parse) ++ part = data->parse(data->priv, master, pp); ++ else ++ part = nandpart_alloc(); ++ ++ if (IS_ERR(part)) ++ continue; ++ ++ part->offset = offset; ++ part->master = master; ++ part->mtd.name = partname; ++ part->mtd.size = size; ++ part->mtd.flags = mask_flags; ++ ++ if (nand_add_partition(master, part)) { ++ if (part->release) ++ part->release(part); ++ continue; ++ } ++ ++ i++; ++ } ++ ++ if (!i) { ++ of_node_put(pp); ++ pr_err("No valid partition found on %s\n", node->full_name); ++ } ++ ++ return i; ++} ++EXPORT_SYMBOL(ofnandpart_parse); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Parser for NAND flash partitioning information in device tree"); ++MODULE_AUTHOR("Boris BREZILLON"); +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 510e09b..5616f51 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -1013,6 +1013,23 @@ static inline int jedec_feature(struct nand_chip *chip) + : 0; + } + ++/** ++ * struct ofnandpart_data - struct used to retrieve NAND partitions from a DT ++ * node ++ * @parse: driver specific parser function ++ * @priv: driver private data ++ * @node: OF node containing NAND partitions ++ */ ++struct ofnandpart_data { ++ struct nand_part *(*parse)(void *priv, struct mtd_info *master, ++ struct device_node *pp); ++ void *priv; ++ struct device_node *node; ++}; ++ ++int ofnandpart_parse(struct mtd_info *master, ++ const struct ofnandpart_data *data); ++ + /* + * struct nand_sdr_timings - SDR NAND chip timings + * diff --git a/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch b/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch new file mode 100644 index 0000000000..efab359d84 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch @@ -0,0 +1,265 @@ +From bec69bb8e85151729014d859106dcc3fe652b1d4 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:45:40 +0200 +Subject: [PATCH] mtd: nand: Add page status table (pst) + +Page status table is an byte array storing pages status. +It defines 3 status: + - unknown: the page has not been read yet and we do not know its current + state + - empty: the page contains only FFs + - filled: the page has been filled with data + +Care must be taken: an empty page does not mean it can be written, because +it might have already been written with only FFs. + +These page status are useful to check wether the controller should try to +correct errors (using ECC) or a derandomize data (using a randomizer +block). + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 154 +++++++++++++++++++++++++++++++++++++++++++ + include/linux/mtd/nand.h | 21 ++++++ + 2 files changed, 175 insertions(+) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index a30b67f..8a5d12e 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -1102,6 +1102,138 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) + EXPORT_SYMBOL(nand_lock); + + /** ++ * nand_page_is_empty - check wether a NAND page contains only FFs ++ * @mtd: mtd info ++ * @data: data buffer ++ * @oob: oob buffer ++ * ++ * Reads the data stored in the databuf buffer and check if it contains only ++ * FFs. ++ * ++ * Return true if it does else return false. ++ */ ++bool nand_page_is_empty(struct mtd_info *mtd, void *data, void *oob) ++{ ++ u8 *buf; ++ int length; ++ u32 pattern = 0xffffffff; ++ int bitflips = 0; ++ int cnt; ++ ++ buf = data; ++ length = mtd->writesize; ++ while (length) { ++ cnt = length < sizeof(pattern) ? length : sizeof(pattern); ++ if (memcmp(&pattern, buf, cnt)) { ++ int i; ++ for (i = 0; i < cnt * BITS_PER_BYTE; i++) { ++ if (!(buf[i / BITS_PER_BYTE] & ++ (1 << (i % BITS_PER_BYTE)))) { ++ bitflips++; ++ if (bitflips > mtd->ecc_strength) ++ return false; ++ } ++ } ++ } ++ ++ buf += sizeof(pattern); ++ length -= sizeof(pattern); ++ } ++ ++ buf = oob; ++ length = mtd->oobsize; ++ while (length) { ++ cnt = length < sizeof(pattern) ? length : sizeof(pattern); ++ if (memcmp(&pattern, buf, cnt)) { ++ int i; ++ for (i = 0; i < cnt * BITS_PER_BYTE; i++) { ++ if (!(buf[i / BITS_PER_BYTE] & ++ (1 << (i % BITS_PER_BYTE)))) { ++ bitflips++; ++ if (bitflips > mtd->ecc_strength) ++ return false; ++ } ++ } ++ } ++ ++ buf += sizeof(pattern); ++ length -= sizeof(pattern); ++ } ++ ++ return true; ++} ++EXPORT_SYMBOL(nand_page_is_empty); ++ ++/** ++ * nand_page_get_status - retrieve page status from the page status table (pst) ++ * @mtd: mtd info ++ * @page: page you want to get status on ++ * ++ * Return the page status. ++ */ ++int nand_page_get_status(struct mtd_info *mtd, int page) ++{ ++ struct nand_chip *chip = mtd->priv; ++ u8 shift = (page % 4) * 2; ++ uint64_t offset = page / 4; ++ int ret = NAND_PAGE_STATUS_UNKNOWN; ++ ++ if (chip->pst) ++ ret = (chip->pst[offset] >> shift) & 0x3; ++ ++ return ret; ++} ++EXPORT_SYMBOL(nand_page_get_status); ++ ++/** ++ * nand_page_set_status - assign page status from in the page status table ++ * @mtd: mtd info ++ * @page: page you want to get status on ++ * @status: new status to assign ++ */ ++void nand_page_set_status(struct mtd_info *mtd, int page, ++ enum nand_page_status status) ++{ ++ struct nand_chip *chip = mtd->priv; ++ u8 shift; ++ uint64_t offset; ++ ++ if (!chip->pst) ++ return; ++ ++ shift = (page % 4) * 2; ++ offset = page / 4; ++ chip->pst[offset] &= ~(0x3 << shift); ++ chip->pst[offset] |= (status & 0x3) << shift; ++} ++EXPORT_SYMBOL(nand_page_set_status); ++ ++/** ++ * nand_pst_create - create a page status table ++ * @mtd: mtd info ++ * ++ * Allocate a page status table and assign it to the mtd device. ++ * ++ * Returns 0 in case of success or -ERRNO in case of error. ++ */ ++int nand_pst_create(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (chip->pst) ++ return 0; ++ ++ chip->pst = kzalloc(mtd->size >> ++ (chip->page_shift + mtd->subpage_sft + 2), ++ GFP_KERNEL); ++ if (!chip->pst) ++ return -ENOMEM; ++ ++ return 0; ++} ++EXPORT_SYMBOL(nand_pst_create); ++ ++/** + * nand_read_page_raw - [INTERN] read raw page data without ecc + * @mtd: mtd info structure + * @chip: nand chip info structure +@@ -2539,6 +2671,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, + uint8_t *wbuf = buf; + int use_bufpoi; + int part_pagewr = (column || writelen < (mtd->writesize - 1)); ++ int subpage; + + if (part_pagewr) + use_bufpoi = 1; +@@ -2574,6 +2707,14 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, + if (ret) + break; + ++ for (subpage = column / chip->subpagesize; ++ subpage < (column + writelen) / chip->subpagesize; ++ subpage++) ++ nand_page_set_status(mtd, ++ (page << mtd->subpage_sft) + ++ subpage, ++ NAND_PAGE_FILLED); ++ + writelen -= bytes; + if (!writelen) + break; +@@ -2979,6 +3120,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + int page, status, pages_per_block, ret, chipnr; + struct nand_chip *chip = mtd->priv; + loff_t len; ++ int i; + + pr_debug("%s: start = 0x%012llx, len = %llu\n", + __func__, (unsigned long long)instr->addr, +@@ -3051,6 +3193,18 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + goto erase_exit; + } + ++ for (i = 0; i < pages_per_block; i++) { ++ int subpage; ++ for (subpage = 0; ++ subpage < 1 << mtd->subpage_sft; ++ subpage++) { ++ nand_page_set_status(mtd, ++ ((page + i) << mtd->subpage_sft) + ++ subpage, ++ NAND_PAGE_EMPTY); ++ } ++ } ++ + /* Increment page address and decrement length */ + len -= (1ULL << chip->phys_erase_shift); + page += pages_per_block; +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 5616f51..4f7ca8d 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -521,6 +521,24 @@ struct nand_ecc_ctrl { + int page); + }; + ++/* ++ * Constants for page status ++ */ ++enum nand_page_status { ++ NAND_PAGE_STATUS_UNKNOWN, ++ NAND_PAGE_EMPTY, ++ NAND_PAGE_FILLED, ++}; ++ ++bool nand_page_is_empty(struct mtd_info *mtd, void *data, void *oob); ++ ++int nand_page_get_status(struct mtd_info *mtd, int page); ++ ++void nand_page_set_status(struct mtd_info *mtd, int page, ++ enum nand_page_status status); ++ ++int nand_pst_create(struct mtd_info *mtd); ++ + /** + * struct nand_buffers - buffer structure for read/write + * @ecccalc: buffer pointer for calculated ECC, size is oobsize. +@@ -630,6 +648,7 @@ struct nand_buffers { + * @bbt_md: [REPLACEABLE] bad block table mirror descriptor + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial + * bad block scan. ++ * @pst: [INTERN] page status table + * @controller: [REPLACEABLE] a pointer to a hardware controller + * structure which is shared among multiple independent + * devices. +@@ -718,6 +737,8 @@ struct nand_chip { + + struct nand_bbt_descr *badblock_pattern; + ++ uint8_t *pst; ++ + struct list_head partitions; + struct mutex part_lock; + diff --git a/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch b/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch new file mode 100644 index 0000000000..7d1bdbd9aa --- /dev/null +++ b/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch @@ -0,0 +1,851 @@ +From 293984c7f167a08285596ef2166d8ab9cb571778 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:46:26 +0200 +Subject: [PATCH] mtd: nand: Introduce a randomizer layer in the NAND framework + +This patch introduce a new layer in the NAND framework to support both HW +and SW randomizers. + +This randomization is required on some MLC/TLC NAND chips which do not +support large islands of same patterns. + +The randomizer layer defines a nand_rnd_ctrl struct which is intended to +be used by NAND core functions or NAND drivers to randomize/derandomize +data stored on NAND chips. + +The implementation can implement any of these functions: +- config: prepare a random transfer to/from the NAND chip +- write_buf: randomize and write data to the NAND chip +- read_buf: read and derandomize data from the NAND chip + +read/write_buf functions are always called after a config call. +The config call specify the page, the column within the page and the action +that will take place after the config (either read or write). +If column is set to -1, the randomizer is disabled. +If page is set to -1, we keep working on the same page. + +The randomizer layer provides helper functions that choose wether the +randomizer or the chip read/write_buf should be used. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 278 ++++++++++++++++++++++++++++++++++--------- + include/linux/mtd/nand.h | 98 +++++++++++++++ + 2 files changed, 321 insertions(+), 55 deletions(-) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 8a5d12e..577cb9e 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -1102,6 +1102,62 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) + EXPORT_SYMBOL(nand_lock); + + /** ++ * nand_rnd_is_activ - check wether a region of a NAND page requires NAND ++ * randomizer to be disabled ++ * @mtd: mtd info ++ * @page: NAND page ++ * @column: offset within the page ++ * @len: len of the region ++ * ++ * Returns 1 if the randomizer should be enabled, 0 if not, or -ERR in case of ++ * error. ++ * ++ * In case of success len will contain the size of the region: ++ * - if the requested region fits in a NAND random region len will not change ++ * - else len will be replaced by the available length within the NAND random ++ * region ++ */ ++int nand_rnd_is_activ(struct mtd_info *mtd, int page, int column, int *len) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_rnd_layout *layout = chip->cur_rnd->layout; ++ struct nand_rndfree *range; ++ int ret = 1; ++ int tmp; ++ int i; ++ ++ if (!len || *len < 0 || column < 0 || ++ column + *len > mtd->writesize + mtd->oobsize) ++ return -EINVAL; ++ ++ if (layout) { ++ for (i = 0; i < layout->nranges; i++) { ++ range = &layout->ranges[i]; ++ if (column + *len <= range->offset) { ++ break; ++ } else if (column >= range->offset + range->length) { ++ continue; ++ } else if (column < range->offset) { ++ tmp = range->offset - column; ++ if (*len > tmp) ++ *len = tmp; ++ break; ++ } else { ++ tmp = range->offset + range->length - column; ++ if (*len > tmp) ++ *len = tmp; ++ ret = 0; ++ break; ++ } ++ ++ } ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL(nand_rnd_is_activ); ++ ++/** + * nand_page_is_empty - check wether a NAND page contains only FFs + * @mtd: mtd info + * @data: data buffer +@@ -1246,9 +1302,14 @@ EXPORT_SYMBOL(nand_pst_create); + static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- chip->read_buf(mtd, buf, mtd->writesize); +- if (oob_required) +- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, page, 0, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, buf, mtd->writesize); ++ if (oob_required) { ++ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); ++ + return 0; + } + +@@ -1270,28 +1331,40 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, + int eccbytes = chip->cur_ecc->bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; ++ int column = 0; + + for (steps = chip->cur_ecc->steps; steps > 0; steps--) { +- chip->read_buf(mtd, buf, eccsize); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, buf, eccsize); + buf += eccsize; ++ column += eccsize; + + if (chip->cur_ecc->prepad) { +- chip->read_buf(mtd, oob, chip->cur_ecc->prepad); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->prepad); + oob += chip->cur_ecc->prepad; ++ column += chip->cur_ecc->prepad; + } + +- chip->read_buf(mtd, oob, eccbytes); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, eccbytes); + oob += eccbytes; ++ column += eccbytes; + + if (chip->cur_ecc->postpad) { +- chip->read_buf(mtd, oob, chip->cur_ecc->postpad); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->postpad); + oob += chip->cur_ecc->postpad; ++ column += chip->cur_ecc->postpad; + } + } + + size = mtd->oobsize - (oob - chip->oob_poi); +- if (size) +- chip->read_buf(mtd, oob, size); ++ if (size) { ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, size); ++ } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + + return 0; + } +@@ -1380,7 +1453,8 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); + + p = bufpoi + data_col_addr; +- chip->read_buf(mtd, p, datafrag_len); ++ nand_rnd_config(mtd, -1, data_col_addr, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ + for (i = 0; i < eccfrag_len; +@@ -1399,7 +1473,8 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + } + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); +- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, -1, mtd->writesize, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); + } else { + /* + * Send the command to read the particular ECC bytes take care +@@ -1415,7 +1490,8 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, + mtd->writesize + aligned_pos, -1); +- chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); ++ nand_rnd_config(mtd, -1, mtd->writesize + aligned_pos, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + + for (i = 0; i < eccfrag_len; i++) +@@ -1436,6 +1512,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + return max_bitflips; + } + +@@ -1460,13 +1537,17 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + unsigned int max_bitflips = 0; ++ int column = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); +- chip->read_buf(mtd, p, eccsize); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, p, eccsize); + chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); ++ column += eccsize; + } +- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + for (i = 0; i < chip->cur_ecc->total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; +@@ -1486,6 +1567,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + return max_bitflips; + } + +@@ -1514,11 +1596,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + uint32_t *eccpos = chip->cur_ecc->layout->eccpos; + uint8_t *ecc_calc = chip->buffers->ecccalc; + unsigned int max_bitflips = 0; ++ int column = 0; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); +- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); ++ column = 0; + + for (i = 0; i < chip->cur_ecc->total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; +@@ -1527,7 +1612,8 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + int stat; + + chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); +- chip->read_buf(mtd, p, eccsize); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, p, eccsize); + chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); + + stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], NULL); +@@ -1538,6 +1624,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + return max_bitflips; + } + +@@ -1561,20 +1648,27 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + unsigned int max_bitflips = 0; ++ int column = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); +- chip->read_buf(mtd, p, eccsize); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, p, eccsize); ++ column += eccsize; + + if (chip->cur_ecc->prepad) { +- chip->read_buf(mtd, oob, chip->cur_ecc->prepad); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->prepad); + oob += chip->cur_ecc->prepad; + } + + chip->cur_ecc->hwctl(mtd, NAND_ECC_READSYN); +- chip->read_buf(mtd, oob, eccbytes); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, eccbytes); ++ column += eccbytes; ++ + stat = chip->cur_ecc->correct(mtd, p, oob, NULL); + + if (stat < 0) { +@@ -1587,29 +1681,36 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + oob += eccbytes; + + if (chip->cur_ecc->postpad) { +- chip->read_buf(mtd, oob, chip->cur_ecc->postpad); ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->postpad); ++ column += chip->cur_ecc->postpad; + oob += chip->cur_ecc->postpad; + } + } + + /* Calculate remaining oob bytes */ + i = mtd->oobsize - (oob - chip->oob_poi); +- if (i) +- chip->read_buf(mtd, oob, i); ++ if (i) { ++ nand_rnd_config(mtd, page, column, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, i); ++ } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + + return max_bitflips; + } + + /** + * nand_transfer_oob - [INTERN] Transfer oob to client buffer +- * @chip: nand chip structure ++ * @mtd: mtd structure + * @oob: oob destination address + * @ops: oob ops structure + * @len: size of oob to transfer + */ +-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, ++static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob, + struct mtd_oob_ops *ops, size_t len) + { ++ struct nand_chip *chip = mtd->priv; ++ + switch (ops->mode) { + + case MTD_OPS_PLACE_OOB: +@@ -1737,6 +1838,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, + * Now read the page into the buffer. Absent an error, + * the read methods return max bitflips per ecc step. + */ ++ nand_rnd_config(mtd, page, -1, NAND_RND_READ); + if (unlikely(ops->mode == MTD_OPS_RAW)) + ret = chip->cur_ecc->read_page_raw(mtd, chip, + bufpoi, +@@ -1753,6 +1855,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, + bufpoi, + oob_required, + page); ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); ++ + if (ret < 0) { + if (use_bufpoi) + /* Invalidate page cache */ +@@ -1780,8 +1884,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, + int toread = min(oobreadlen, max_oobsize); + + if (toread) { +- oob = nand_transfer_oob(chip, +- oob, ops, toread); ++ oob = nand_transfer_oob(mtd, oob, ops, ++ toread); + oobreadlen -= toread; + } + } +@@ -1909,12 +2013,15 @@ static int nand_part_read(struct mtd_info *mtd, loff_t from, size_t len, + nand_get_device(part->master, FL_READING); + if (part->ecc) + chip->cur_ecc = part->ecc; ++ if (part->rnd) ++ chip->cur_rnd = part->rnd; + ops.len = len; + ops.datbuf = buf; + ops.oobbuf = NULL; + ops.mode = MTD_OPS_PLACE_OOB; + ret = nand_do_read_ops(part->master, from, &ops); + *retlen = ops.retlen; ++ chip->cur_rnd = &chip->rnd; + chip->cur_ecc = &chip->ecc; + nand_release_device(part->master); + return ret; +@@ -1930,7 +2037,9 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, + int page) + { + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); +- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + return 0; + } + +@@ -1949,7 +2058,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + chip->cur_ecc->postpad; + int eccsize = chip->cur_ecc->size; + uint8_t *bufpoi = chip->oob_poi; +- int i, toread, sndrnd = 0, pos; ++ int i, toread, sndrnd = 0, pos = eccsize; + + chip->cmdfunc(mtd, NAND_CMD_READ0, chip->cur_ecc->size, page); + for (i = 0; i < chip->cur_ecc->steps; i++) { +@@ -1962,12 +2071,17 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + } else + sndrnd = 1; + toread = min_t(int, length, chunk); +- chip->read_buf(mtd, bufpoi, toread); ++ nand_rnd_config(mtd, page, pos, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, bufpoi, toread); + bufpoi += toread; + length -= toread; + } +- if (length > 0) +- chip->read_buf(mtd, bufpoi, length); ++ if (length > 0) { ++ pos = mtd->writesize + mtd->oobsize - length; ++ nand_rnd_config(mtd, page, pos, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, bufpoi, length); ++ } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); + + return 0; + } +@@ -1986,7 +2100,9 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, + int length = mtd->oobsize; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); +- chip->write_buf(mtd, buf, length); ++ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, buf, length); ++ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); + /* Send command to program the OOB data */ + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + +@@ -2042,12 +2158,18 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, + } else + sndcmd = 1; + len = min_t(int, length, chunk); +- chip->write_buf(mtd, bufpoi, len); ++ nand_rnd_config(mtd, page, pos, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, bufpoi, len); + bufpoi += len; + length -= len; + } +- if (length > 0) +- chip->write_buf(mtd, bufpoi, length); ++ if (length > 0) { ++ pos = mtd->writesize + mtd->oobsize - length; ++ nand_rnd_config(mtd, page, pos, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, bufpoi, length); ++ } ++ ++ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); +@@ -2116,7 +2238,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, + break; + + len = min(len, readlen); +- buf = nand_transfer_oob(chip, buf, ops, len); ++ buf = nand_transfer_oob(mtd, buf, ops, len); + + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ +@@ -2226,6 +2348,8 @@ static int nand_part_read_oob(struct mtd_info *mtd, loff_t from, + nand_get_device(part->master, FL_READING); + if (part->ecc) + chip->cur_ecc = part->ecc; ++ if (part->rnd) ++ chip->cur_rnd = part->rnd; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: +@@ -2243,6 +2367,7 @@ static int nand_part_read_oob(struct mtd_info *mtd, loff_t from, + ret = nand_do_read_ops(part->master, from, ops); + + out: ++ chip->cur_rnd = &chip->rnd; + chip->cur_ecc = &chip->ecc; + nand_release_device(part->master); + return ret; +@@ -2261,9 +2386,11 @@ static int nand_part_read_oob(struct mtd_info *mtd, loff_t from, + static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) + { +- chip->write_buf(mtd, buf, mtd->writesize); +- if (oob_required) +- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_write_buf(mtd, buf, mtd->writesize); ++ if (oob_required) { ++ nand_rnd_config(mtd, -1, mtd->writesize, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); ++ } + + return 0; + } +@@ -2285,28 +2412,39 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd, + int eccbytes = chip->cur_ecc->bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; ++ int column = 0; + + for (steps = chip->cur_ecc->steps; steps > 0; steps--) { +- chip->write_buf(mtd, buf, eccsize); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, buf, eccsize); + buf += eccsize; ++ column += eccsize; + + if (chip->cur_ecc->prepad) { +- chip->write_buf(mtd, oob, chip->cur_ecc->prepad); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->prepad); + oob += chip->cur_ecc->prepad; ++ column += chip->cur_ecc->prepad; + } + +- chip->write_buf(mtd, oob, eccbytes); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, eccbytes); + oob += eccbytes; ++ column += eccbytes; + + if (chip->cur_ecc->postpad) { +- chip->write_buf(mtd, oob, chip->cur_ecc->postpad); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->postpad); + oob += chip->cur_ecc->postpad; ++ column += chip->cur_ecc->postpad; + } + } + + size = mtd->oobsize - (oob - chip->oob_poi); +- if (size) +- chip->write_buf(mtd, oob, size); ++ if (size) { ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, size); ++ } + + return 0; + } +@@ -2353,17 +2491,21 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; + uint32_t *eccpos = chip->cur_ecc->layout->eccpos; ++ int column = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); +- chip->write_buf(mtd, p, eccsize); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, p, eccsize); + chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); ++ column += eccsize; + } + + for (i = 0; i < chip->cur_ecc->total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + +- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; + } +@@ -2399,7 +2541,9 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); + + /* write data (untouched subpages already masked by 0xFF) */ +- chip->write_buf(mtd, buf, ecc_size); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, buf, ecc_size); ++ offset += ecc_size; + + /* mask ECC of un-touched subpages by padding 0xFF */ + if ((step < start_step) || (step > end_step)) +@@ -2424,7 +2568,8 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd, + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + /* write OOB buffer to NAND device */ +- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; + } +@@ -2449,31 +2594,42 @@ static int nand_write_page_syndrome(struct mtd_info *mtd, + int eccsteps = chip->cur_ecc->steps; + const uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; ++ int column = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + + chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); +- chip->write_buf(mtd, p, eccsize); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, p, eccsize); ++ column += eccsize; + + if (chip->cur_ecc->prepad) { +- chip->write_buf(mtd, oob, chip->cur_ecc->prepad); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->prepad); + oob += chip->cur_ecc->prepad; ++ column += chip->cur_ecc->prepad; + } + + chip->cur_ecc->calculate(mtd, p, oob); +- chip->write_buf(mtd, oob, eccbytes); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, eccbytes); + oob += eccbytes; ++ column += eccbytes; + + if (chip->cur_ecc->postpad) { +- chip->write_buf(mtd, oob, chip->cur_ecc->postpad); ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->postpad); + oob += chip->cur_ecc->postpad; ++ column += chip->cur_ecc->postpad; + } + } + + /* Calculate remaining oob bytes */ + i = mtd->oobsize - (oob - chip->oob_poi); +- if (i) +- chip->write_buf(mtd, oob, i); ++ if (i) { ++ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, i); ++ } + + return 0; + } +@@ -2504,6 +2660,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + ++ nand_rnd_config(mtd, page, 0, NAND_RND_WRITE); + if (unlikely(raw)) + status = chip->cur_ecc->write_page_raw(mtd, chip, buf, + oob_required); +@@ -2514,6 +2671,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + else + status = chip->cur_ecc->write_page(mtd, chip, buf, + oob_required); ++ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); + + if (status < 0) + return status; +@@ -2803,6 +2961,8 @@ static int panic_nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, + panic_nand_get_device(chip, part->master, FL_WRITING); + if (part->ecc) + chip->cur_ecc = part->ecc; ++ if (part->rnd) ++ chip->cur_rnd = part->rnd; + + ops.len = len; + ops.datbuf = (uint8_t *)buf; +@@ -2811,6 +2971,7 @@ static int panic_nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, + + ret = nand_do_write_ops(part->master, to, &ops); + ++ chip->cur_rnd = &chip->rnd; + chip->cur_ecc = &chip->ecc; + *retlen = ops.retlen; + return ret; +@@ -2865,12 +3026,15 @@ static int nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, + nand_get_device(part->master, FL_WRITING); + if (part->ecc) + chip->cur_ecc = part->ecc; ++ if (part->rnd) ++ chip->cur_rnd = part->rnd; + ops.len = len; + ops.datbuf = (uint8_t *)buf; + ops.oobbuf = NULL; + ops.mode = MTD_OPS_PLACE_OOB; + ret = nand_do_write_ops(part->master, to, &ops); + *retlen = ops.retlen; ++ chip->cur_rnd = &chip->rnd; + chip->cur_ecc = &chip->ecc; + nand_release_device(part->master); + return ret; +@@ -3032,6 +3196,8 @@ static int nand_part_write_oob(struct mtd_info *mtd, loff_t to, + nand_get_device(part->master, FL_WRITING); + if (part->ecc) + chip->cur_ecc = part->ecc; ++ if (part->rnd) ++ chip->cur_rnd = part->rnd; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: +@@ -3049,6 +3215,7 @@ static int nand_part_write_oob(struct mtd_info *mtd, loff_t to, + ret = nand_do_write_ops(part->master, to, ops); + + out: ++ chip->cur_rnd = &chip->rnd; + chip->cur_ecc = &chip->ecc; + nand_release_device(part->master); + return ret; +@@ -4749,6 +4916,7 @@ int nand_scan_tail(struct mtd_info *mtd) + mutex_init(&chip->part_lock); + + chip->cur_ecc = &chip->ecc; ++ chip->cur_rnd = &chip->rnd; + + /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 4f7ca8d..6cbd06a3 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -539,6 +539,64 @@ void nand_page_set_status(struct mtd_info *mtd, int page, + + int nand_pst_create(struct mtd_info *mtd); + ++/* ++ * Constants for randomizer modes ++ */ ++typedef enum { ++ NAND_RND_NONE, ++ NAND_RND_SOFT, ++ NAND_RND_HW, ++} nand_rnd_modes_t; ++ ++/* ++ * Constants for randomizer actions ++ */ ++enum nand_rnd_action { ++ NAND_RND_NO_ACTION, ++ NAND_RND_READ, ++ NAND_RND_WRITE, ++}; ++ ++/** ++ * struct nand_rndfree - Structure defining a NAND page region where the ++ * randomizer should be disabled ++ * @offset: range offset ++ * @length: range length ++ */ ++struct nand_rndfree { ++ u32 offset; ++ u32 length; ++}; ++ ++/** ++ * struct nand_rnd_layout - Structure defining rndfree regions ++ * @nranges: number of ranges ++ * @ranges: array defining the rndfree regions ++ */ ++struct nand_rnd_layout { ++ int nranges; ++ struct nand_rndfree ranges[0]; ++}; ++ ++/** ++ * struct nand_rnd_ctrl - Randomizer Control structure ++ * @mode: Randomizer mode ++ * @config: function to prepare the randomizer (i.e.: set the appropriate ++ * seed/init value). ++ * @read_buf: function that read from the NAND and descramble the retrieved ++ * data. ++ * @write_buf: function that scramble data before writing it to the NAND. ++ */ ++struct nand_rnd_ctrl { ++ nand_rnd_modes_t mode; ++ struct nand_rnd_layout *layout; ++ void *priv; ++ int (*config)(struct mtd_info *mtd, int page, int column, ++ enum nand_rnd_action action); ++ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); ++ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); ++}; ++ + /** + * struct nand_buffers - buffer structure for read/write + * @ecccalc: buffer pointer for calculated ECC, size is oobsize. +@@ -731,6 +789,9 @@ struct nand_chip { + struct nand_buffers *buffers; + struct nand_hw_control hwcontrol; + ++ struct nand_rnd_ctrl rnd; ++ struct nand_rnd_ctrl *cur_rnd; ++ + uint8_t *bbt; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; +@@ -752,6 +813,7 @@ struct nand_chip { + * @master: MTD device representing the NAND chip + * @offset: partition offset + * @ecc: partition specific ECC struct ++ * @rnd: partition specific randomizer struct + * @release: function used to release this nand_part struct + * + * NAND partitions work as standard MTD partitions except it can override +@@ -765,6 +827,7 @@ struct nand_part { + struct mtd_info *master; + uint64_t offset; + struct nand_ecc_ctrl *ecc; ++ struct nand_rnd_ctrl *rnd; + void (*release)(struct nand_part *part); + }; + +@@ -902,6 +965,41 @@ extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, uint8_t *buf); + ++static inline int nand_rnd_config(struct mtd_info *mtd, int page, int column, ++ enum nand_rnd_action action) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (chip->cur_rnd && chip->cur_rnd->config) ++ return chip->cur_rnd->config(mtd, page, column, action); ++ ++ return 0; ++} ++ ++static inline void nand_rnd_write_buf(struct mtd_info *mtd, const uint8_t *buf, ++ int len) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (chip->cur_rnd && chip->cur_rnd->read_buf) ++ chip->cur_rnd->write_buf(mtd, buf, len); ++ else ++ chip->write_buf(mtd, buf, len); ++} ++ ++static inline void nand_rnd_read_buf(struct mtd_info *mtd, uint8_t *buf, ++ int len) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (chip->cur_rnd && chip->cur_rnd->read_buf) ++ chip->cur_rnd->read_buf(mtd, buf, len); ++ else ++ chip->read_buf(mtd, buf, len); ++} ++ ++int nand_rnd_is_activ(struct mtd_info *mtd, int page, int column, int *len); ++ + /** + * struct platform_nand_chip - chip level device structure + * @nr_chips: max. number of chips to scan for diff --git a/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch b/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch new file mode 100644 index 0000000000..f4c36ec56c --- /dev/null +++ b/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch @@ -0,0 +1,84 @@ +From eb7f9115409710732ebc4dfe1be629252280910e Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:47:04 +0200 +Subject: [PATCH] of: mtd: Add NAND randomizer mode retrieval + +Add a of_get_nand_rnd_mode() helper function. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/of/of_mtd.c | 35 +++++++++++++++++++++++++++++++++++ + include/linux/of_mtd.h | 6 ++++++ + 2 files changed, 41 insertions(+) + +diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c +index b7361ed..4e42c26 100644 +--- a/drivers/of/of_mtd.c ++++ b/drivers/of/of_mtd.c +@@ -84,6 +84,41 @@ int of_get_nand_ecc_strength(struct device_node *np) + EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength); + + /** ++ * It maps 'enum nand_rnd_modes_t' found in include/linux/mtd/nand.h ++ * into the device tree binding of 'nand-rnd', so that MTD ++ * device driver can get nand rnd from device tree. ++ */ ++static const char *nand_rnd_modes[] = { ++ [NAND_RND_NONE] = "none", ++ [NAND_RND_SOFT] = "soft", ++ [NAND_RND_HW] = "hw", ++}; ++ ++/** ++ * of_get_nand_rnd_mode - Get nand randomizer mode for given device_node ++ * @np: Pointer to the given device_node ++ * ++ * The function gets randomizer mode string from property 'nand-rnd-mode', ++ * and return its index in nand_rnd_modes table, or errno in error case. ++ */ ++int of_get_nand_rnd_mode(struct device_node *np) ++{ ++ const char *pm; ++ int err, i; ++ ++ err = of_property_read_string(np, "nand-rnd-mode", &pm); ++ if (err < 0) ++ return err; ++ ++ for (i = 0; i < ARRAY_SIZE(nand_rnd_modes); i++) ++ if (!strcasecmp(pm, nand_rnd_modes[i])) ++ return i; ++ ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(of_get_nand_rnd_mode); ++ ++/** + * of_get_nand_bus_width - Get nand bus witdh for given device_node + * @np: Pointer to the given device_node + * +diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h +index e266caa..1059472 100644 +--- a/include/linux/of_mtd.h ++++ b/include/linux/of_mtd.h +@@ -15,6 +15,7 @@ + int of_get_nand_ecc_mode(struct device_node *np); + int of_get_nand_ecc_step_size(struct device_node *np); + int of_get_nand_ecc_strength(struct device_node *np); ++int of_get_nand_rnd_mode(struct device_node *np); + int of_get_nand_bus_width(struct device_node *np); + bool of_get_nand_on_flash_bbt(struct device_node *np); + +@@ -35,6 +36,11 @@ static inline int of_get_nand_ecc_strength(struct device_node *np) + return -ENOSYS; + } + ++static inline int of_get_nand_rnd_mode(struct device_node *np) ++{ ++ return -ENOSYS; ++} ++ + static inline int of_get_nand_bus_width(struct device_node *np) + { + return -ENOSYS; diff --git a/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch b/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch new file mode 100644 index 0000000000..ac8015607c --- /dev/null +++ b/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch @@ -0,0 +1,55 @@ +From 95430662a26332474f4a03a7f8f44fd8d80890b3 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <b.brezillon.dev@gmail.com> +Date: Mon, 24 Feb 2014 16:28:32 +0100 +Subject: [PATCH] mtd: nand: Add manufacturer specific init code infrastructure + +Add new fields in nand_manufacturers and nand_chip struct to provide +manufacturer specific handling like read retries. + +Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 7 +++++++ + include/linux/mtd/nand.h | 4 ++++ + 2 files changed, 11 insertions(+) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 577cb9e..51642c6 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -4382,6 +4382,13 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, + if (mtd->writesize > 512 && chip->cmdfunc == nand_command) + chip->cmdfunc = nand_command_lp; + ++ if (nand_manuf_ids[maf_idx].init) { ++ int err; ++ err = nand_manuf_ids[maf_idx].init(mtd, id_data); ++ if (err) ++ return ERR_PTR(err); ++ } ++ + pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", + *maf_id, *dev_id); + +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 6cbd06a3..5844d6f 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -748,6 +748,9 @@ struct nand_chip { + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode); ++ void (*manuf_cleanup)(struct mtd_info *mtd); ++ ++ void *manuf_priv; + + int chip_delay; + unsigned int options; +@@ -950,6 +953,7 @@ struct nand_flash_dev { + struct nand_manufacturers { + int id; + char *name; ++ int (*init)(struct mtd_info *mtd, const uint8_t *id); + }; + + extern struct nand_flash_dev nand_flash_ids[]; diff --git a/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch b/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch new file mode 100644 index 0000000000..4430a50822 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch @@ -0,0 +1,229 @@ +From 5c5e3963a1b58be1669da5da93f51dc339cd73d7 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <b.brezillon.dev@gmail.com> +Date: Mon, 24 Feb 2014 16:30:22 +0100 +Subject: [PATCH] mtd: nand: Add hynix specific initializer + +Add an hynix initiliazer to manage read retries on h27uxgt8t2a chip. + +Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/Makefile | 2 +- + drivers/mtd/nand/nand_hynix.c | 159 ++++++++++++++++++++++++++++++++++++++++++ + drivers/mtd/nand/nand_ids.c | 3 +- + include/linux/mtd/nand.h | 2 + + 4 files changed, 164 insertions(+), 2 deletions(-) + create mode 100644 drivers/mtd/nand/nand_hynix.c + +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index fcbe032..07b7c8c 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -5,7 +5,7 @@ + obj-$(CONFIG_MTD_NAND) += nand.o + obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o + obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o +-obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o ++obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o nand_hynix.o + obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o + + obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o +diff --git a/drivers/mtd/nand/nand_hynix.c b/drivers/mtd/nand/nand_hynix.c +new file mode 100644 +index 0000000..0d051bf5 +--- /dev/null ++++ b/drivers/mtd/nand/nand_hynix.c +@@ -0,0 +1,159 @@ ++/* ++ * Copyright (C) 2014 Boris BREZILLON <b.brezillon.dev@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/module.h> ++#include <linux/mtd/nand.h> ++#include <linux/slab.h> ++ ++static u8 h27ucg8t2a_read_retry_regs[] = { ++ 0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf ++}; ++ ++struct hynix_read_retry { ++ u8 *regs; ++ u8 values[64]; ++}; ++ ++struct hynix_nand { ++ struct hynix_read_retry read_retry; ++}; ++ ++int nand_setup_read_retry_hynix(struct mtd_info *mtd, int retry_mode) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct hynix_nand *hynix = chip->manuf_priv; ++ int offset = retry_mode * 8; ++ int status; ++ int i; ++ ++ chip->cmdfunc(mtd, 0x36, -1, -1); ++ for (i = 0; i < 8; i++) { ++ int column = hynix->read_retry.regs[i]; ++ column |= column << 8; ++ chip->cmdfunc(mtd, NAND_CMD_NONE, column, -1); ++ chip->write_byte(mtd, hynix->read_retry.values[offset + i]); ++ } ++ chip->cmdfunc(mtd, 0x16, -1, -1); ++ ++ status = chip->waitfunc(mtd, chip); ++ if (status & NAND_STATUS_FAIL) ++ return -EIO; ++ ++ return 0; ++} ++ ++static void h27ucg8t2a_cleanup(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ kfree(chip->manuf_priv); ++} ++ ++static int h27ucg8t2a_init(struct mtd_info *mtd, const uint8_t *id) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct hynix_nand *hynix; ++ u8 * buf = NULL; ++ int i, j; ++ int ret; ++ ++ buf = kzalloc(1024, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ chip->select_chip(mtd, 0); ++ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ chip->cmdfunc(mtd, 0x36, 0xff, -1); ++ chip->write_byte(mtd, 0x40); ++ chip->cmdfunc(mtd, NAND_CMD_NONE, 0xcc, -1); ++ chip->write_byte(mtd, 0x4d); ++ chip->cmdfunc(mtd, 0x16, -1, -1); ++ chip->cmdfunc(mtd, 0x17, -1, -1); ++ chip->cmdfunc(mtd, 0x04, -1, -1); ++ chip->cmdfunc(mtd, 0x19, -1, -1); ++ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, 0x200); ++ ++ chip->read_buf(mtd, buf, 2); ++ if (buf[0] != 0x8 || buf[1] != 0x8) { ++ ret = -EINVAL; ++ goto leave; ++ } ++ chip->read_buf(mtd, buf, 1024); ++ ++ ret = 0; ++ for (j = 0; j < 8; j++) { ++ for (i = 0; i < 64; i++) { ++ u8 *tmp = buf + (128 * j); ++ if ((tmp[i] | tmp[i + 64]) != 0xff) { ++ ret = -EINVAL; ++ goto leave; ++ } ++ } ++ } ++ ++ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ chip->cmdfunc(mtd, 0x38, -1, -1); ++ chip->select_chip(mtd, -1); ++ ++ if (!ret) { ++ hynix = kzalloc(sizeof(*hynix), GFP_KERNEL); ++ if (!hynix) { ++ ret = -ENOMEM; ++ goto leave; ++ } ++ ++ hynix->read_retry.regs = h27ucg8t2a_read_retry_regs; ++ memcpy(hynix->read_retry.values, buf, 64); ++ chip->manuf_priv = hynix; ++ chip->setup_read_retry = nand_setup_read_retry_hynix; ++ chip->read_retries = 8; ++ chip->manuf_cleanup = h27ucg8t2a_cleanup; ++ } ++ ++leave: ++ kfree(buf); ++ ++ return ret; ++} ++ ++struct hynix_nand_initializer { ++ u8 id[6]; ++ int (*init)(struct mtd_info *mtd, const uint8_t *id); ++}; ++ ++struct hynix_nand_initializer initializers[] = { ++ { ++ .id = {NAND_MFR_HYNIX, 0xde, 0x94, 0xda, 0x74, 0xc4}, ++ .init = h27ucg8t2a_init, ++ }, ++}; ++ ++int hynix_nand_init(struct mtd_info *mtd, const uint8_t *id) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(initializers); i++) { ++ struct hynix_nand_initializer *initializer = &initializers[i]; ++ if (memcmp(id, initializer->id, sizeof(initializer->id))) ++ continue; ++ ++ return initializer->init(mtd, id); ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(hynix_nand_init); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Boris BREZILLON <b.brezillon.dev@gmail.com>"); ++MODULE_DESCRIPTION("Hynix NAND specific code"); +diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c +index dd620c1..b786718 100644 +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -163,6 +163,7 @@ struct nand_flash_dev nand_flash_ids[] = { + {NULL} + }; + ++ + /* Manufacturer IDs */ + struct nand_manufacturers nand_manuf_ids[] = { + {NAND_MFR_TOSHIBA, "Toshiba"}, +@@ -171,7 +172,7 @@ struct nand_manufacturers nand_manuf_ids[] = { + {NAND_MFR_NATIONAL, "National"}, + {NAND_MFR_RENESAS, "Renesas"}, + {NAND_MFR_STMICRO, "ST Micro"}, +- {NAND_MFR_HYNIX, "Hynix"}, ++ {NAND_MFR_HYNIX, "Hynix", hynix_nand_init}, + {NAND_MFR_MICRON, "Micron"}, + {NAND_MFR_AMD, "AMD/Spansion"}, + {NAND_MFR_MACRONIX, "Macronix"}, +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 5844d6f..328aab2 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -959,6 +959,8 @@ struct nand_manufacturers { + extern struct nand_flash_dev nand_flash_ids[]; + extern struct nand_manufacturers nand_manuf_ids[]; + ++int hynix_nand_init(struct mtd_info *mtd, const uint8_t *id); ++ + extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); + extern int nand_default_bbt(struct mtd_info *mtd); + extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); diff --git a/target/linux/sunxi/patches-4.1/118-mtd-nand-fix-NAND_options.patch b/target/linux/sunxi/patches-4.1/118-mtd-nand-fix-NAND_options.patch new file mode 100644 index 0000000000..4ff54d7062 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/118-mtd-nand-fix-NAND_options.patch @@ -0,0 +1,43 @@ +From f8ff99a839ed05e1e4993b543357183b095b77f1 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Thu, 1 Jan 2015 16:44:45 +0100 +Subject: [PATCH] mtd: nand: Fix NAND_* options to use unique values. + +NAND_BUSWIDTH_AUTO (64b37b2a6) and NAND_USE_BOUNCE_BUFFER (66507c7bc) +are the same value. Change the later introduced NAND_USE_BOUNCE_BUFFER +to a different value. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + include/linux/mtd/nand.h | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 328aab2..c20f35b 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -176,17 +176,17 @@ typedef enum { + /* Chip may not exist, so silence any errors in scan */ + #define NAND_SCAN_SILENT_NODEV 0x00040000 + /* +- * This option could be defined by controller drivers to protect against +- * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers +- */ +-#define NAND_USE_BOUNCE_BUFFER 0x00080000 +-/* + * Autodetect nand buswidth with readid/onfi. + * This suppose the driver will configure the hardware in 8 bits mode + * when calling nand_scan_ident, and update its configuration + * before calling nand_scan_tail. + */ +-#define NAND_BUSWIDTH_AUTO 0x00080000 ++#define NAND_BUSWIDTH_AUTO 0x00080000 ++/* ++ * This option could be defined by controller drivers to protect against ++ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers ++ */ ++#define NAND_USE_BOUNCE_BUFFER 0x00100000 + + /* Options set by nand scan */ + /* Nand scan has allocated controller struct */ diff --git a/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch b/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch new file mode 100644 index 0000000000..c92398e4ba --- /dev/null +++ b/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch @@ -0,0 +1,70 @@ +From 3fecbdac2fe503fb6896ec08dd2474958d198d62 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Sun, 24 May 2015 12:01:16 +0200 +Subject: [PATCH] mtd: nand: nand_decode_ext_id(): Fill in ecc strength and + size for Samsung + +On some nand controllers with hw-ecc the controller code wants to know the +ecc strength and size and having these as 0, 0 is not accepted. + +Specifying these in devicetree is possible but undesirable as the nand +may be different in different production runs of the same board, so it +is better to get this info from the nand id where possible. + +This commit adds code to read the ecc strength and size from the nand for +Samsung extended-id nands. This code is based on the info for the 5th +id byte in the datasheets for the following Samsung nands: K9GAG08U0E, +K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits +in the exact same way. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 35 +++++++++++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 51642c6..e3d4d8e 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -4063,6 +4063,41 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, + mtd->erasesize = (128 * 1024) << + (((extid >> 1) & 0x04) | (extid & 0x03)); + *busw = 0; ++ /* Calc ecc strength and size from 5th id byte*/ ++ switch ((id_data[4] >> 4) & 0x07) { ++ case 0: ++ chip->ecc_strength_ds = 1; ++ chip->ecc_step_ds = 512; ++ break; ++ case 1: ++ chip->ecc_strength_ds = 2; ++ chip->ecc_step_ds = 512; ++ break; ++ case 2: ++ chip->ecc_strength_ds = 4; ++ chip->ecc_step_ds = 512; ++ break; ++ case 3: ++ chip->ecc_strength_ds = 8; ++ chip->ecc_step_ds = 512; ++ break; ++ case 4: ++ chip->ecc_strength_ds = 16; ++ chip->ecc_step_ds = 512; ++ break; ++ case 5: ++ chip->ecc_strength_ds = 24; ++ chip->ecc_step_ds = 1024; ++ break; ++ case 6: ++ chip->ecc_strength_ds = 40; ++ chip->ecc_step_ds = 1024; ++ break; ++ case 7: ++ chip->ecc_strength_ds = 60; ++ chip->ecc_step_ds = 1024; ++ break; ++ } + } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && + !nand_is_slc(chip)) { + unsigned int tmp; diff --git a/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch b/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch new file mode 100644 index 0000000000..a150cbf2eb --- /dev/null +++ b/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch @@ -0,0 +1,31 @@ +From ec6cde9ea451ffa94b4d0ccbbcbe15c0d35f73d8 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Mon, 25 May 2015 12:57:48 +0200 +Subject: [PATCH] mtd: nand: nand_get_flash_type: Print detected ECC strength + and size + +Print the detected ECC strength and size from nand_get_flash_type(). + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index e3d4d8e..5c6f465 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -4437,9 +4437,11 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, + type->name); + +- pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", ++ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, " ++ "OOB size: %d, ECC strength %d size %d\n", + (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", +- mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); ++ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize, ++ chip->ecc_strength_ds, chip->ecc_step_ds); + return type; + } + diff --git a/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch b/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch new file mode 100644 index 0000000000..6894cc5a92 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch @@ -0,0 +1,69 @@ +From fb177d5b534f263735dc6955703e3c711b950f35 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Thu, 1 Jan 2015 00:57:46 +0100 +Subject: [PATCH] mtd: nand: print full chip ID + +Full chip ID is printed so user has data to paste from syslog in case +of chip misidentification. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/nand_base.c | 23 ++++++++++++++++++----- + 1 file changed, 18 insertions(+), 5 deletions(-) + +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 5c6f465..05ec786 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -4247,7 +4247,7 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type) + } + + static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, +- struct nand_flash_dev *type, u8 *id_data, int *busw) ++ struct nand_flash_dev *type, const u8 *id_data, int *busw) + { + if (!strncmp(type->id, id_data, type->id_len)) { + mtd->writesize = type->pagesize; +@@ -4273,6 +4273,21 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + } + + /* ++ * Print full detail of chip ID read from chip. ++ */ ++static void print_nand_chip_info(int maf_id, int dev_id, u8 id_data[8]) ++{ ++ u8 delim[8] = { [0 ... 7] = ',' }; ++ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", maf_id, dev_id); ++ delim[7] = ' '; ++ delim[nand_id_len(id_data, 8) - 1] = ';'; ++ /* This sucks. Kernel seems to insert newline after every other printk so format in one go. */ ++ pr_info("chip id data: 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c\n", ++ id_data[0], delim[0], id_data[1], delim[1], id_data[2], delim[2], id_data[3], delim[3], ++ id_data[4], delim[4], id_data[5], delim[5], id_data[6], delim[6], id_data[7], delim[7]); ++} ++ ++/* + * Get the flash and manufacturer id and lookup if the type is supported. + */ + static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, +@@ -4385,8 +4400,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, + * Check, if buswidth is correct. Hardware drivers should set + * chip correct! + */ +- pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", +- *maf_id, *dev_id); ++ print_nand_chip_info(*maf_id, *dev_id, id_data); + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name); + pr_warn("bus width %d instead %d bit\n", + (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, +@@ -4424,8 +4438,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, + return ERR_PTR(err); + } + +- pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", +- *maf_id, *dev_id); ++ print_nand_chip_info(*maf_id, *dev_id, id_data); + + if (chip->onfi_version) + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, diff --git a/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch b/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch new file mode 100644 index 0000000000..d993c9db6c --- /dev/null +++ b/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch @@ -0,0 +1,164 @@ +From 5cb31780791d0f6b68e3712f1b35f1a28c47add0 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon <boris.brezillon@free-electrons.com> +Date: Tue, 21 Oct 2014 14:37:15 +0200 +Subject: [PATCH] mtd: nand: sunxi: Add NAND partition support + +Add NAND partition support to the sunxi_nand driver. + +Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/Kconfig | 1 + + drivers/mtd/nand/sunxi_nand.c | 73 +++++++++++++++++++++++++++++++++++++------ + 2 files changed, 65 insertions(+), 9 deletions(-) + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 8242470..7df88c6 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -525,6 +525,7 @@ config MTD_NAND_XWAY + config MTD_NAND_SUNXI + tristate "Support for NAND on Allwinner SoCs" + depends on ARCH_SUNXI ++ select MTD_OF_NAND_PARTS + help + Enables support for NAND Flash chips on Allwinner SoCs. + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index 6f93b29..c3e0473 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -202,6 +202,23 @@ struct sunxi_nand_hw_ecc { + }; + + /* ++ * sunxi NAND partition structure: stores NAND partitions information ++ * ++ * @part: base paritition structure ++ * @ecc: per-partition ECC info ++ */ ++struct sunxi_nand_part { ++ struct nand_part part; ++ struct nand_ecc_ctrl ecc; ++}; ++ ++static inline struct sunxi_nand_part * ++to_sunxi_nand_part(struct nand_part *part) ++{ ++ return container_of(part, struct sunxi_nand_part, part); ++} ++ ++/* + * NAND chip structure: stores NAND chip device related information + * + * @node: used to store NAND chips into a list +@@ -521,7 +538,7 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + int oob_required, int page) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); +- struct nand_ecc_ctrl *ecc = &chip->ecc; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; +@@ -607,7 +624,7 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + const uint8_t *buf, int oob_required) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); +- struct nand_ecc_ctrl *ecc = &chip->ecc; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; + int offset; +@@ -681,7 +698,7 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + int page) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); +- struct nand_ecc_ctrl *ecc = &chip->ecc; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; + uint8_t *oob = chip->oob_poi; +@@ -749,7 +766,7 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + int oob_required) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); +- struct nand_ecc_ctrl *ecc = &chip->ecc; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; + uint8_t *oob = chip->oob_poi; + int offset = 0; +@@ -1099,8 +1116,13 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, + ecc->strength = nand->ecc_strength_ds; + } + +- if (!ecc->size || !ecc->strength) +- return -EINVAL; ++ if (!ecc->size || !ecc->strength) { ++ if (ecc == &nand->ecc) ++ return -EINVAL; ++ ++ ecc->size = nand->ecc.size; ++ ecc->strength = nand->ecc.strength; ++ } + + ecc->mode = NAND_ECC_HW; + +@@ -1135,12 +1157,39 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, + return 0; + } + ++static void sunxi_nand_part_release(struct nand_part *part) ++{ ++ kfree(to_sunxi_nand_part(part)); ++} ++ ++struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master, ++ struct device_node *pp) ++{ ++ struct sunxi_nand_part *part; ++ int ret; ++ ++ part = kzalloc(sizeof(*part), GFP_KERNEL); ++ part->part.release = sunxi_nand_part_release; ++ ++ ret = sunxi_nand_ecc_init(master, &part->ecc, pp); ++ if (ret) ++ goto err; ++ ++ part->part.ecc = &part->ecc; ++ ++ return &part->part; ++ ++err: ++ kfree(part); ++ return ERR_PTR(ret); ++} ++ + static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, + struct device_node *np) + { + const struct nand_sdr_timings *timings; + struct sunxi_nand_chip *chip; +- struct mtd_part_parser_data ppdata; ++ struct ofnandpart_data ppdata; + struct mtd_info *mtd; + struct nand_chip *nand; + int nsels; +@@ -1269,8 +1318,14 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, + return ret; + } + +- ppdata.of_node = np; +- ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); ++ ppdata.node = np; ++ ppdata.parse = sunxi_ofnandpart_parse; ++ ret = ofnandpart_parse(mtd, &ppdata); ++ if (!ret) ++ ret = mtd_device_register(mtd, NULL, 0); ++ else if (ret > 0) ++ ret = 0; ++ + if (ret) { + dev_err(dev, "failed to register mtd device: %d\n", ret); + nand_release(mtd); diff --git a/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch b/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch new file mode 100644 index 0000000000..5d37a38b52 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch @@ -0,0 +1,893 @@ +From ef4bc8ab68979e5c1c30f061c5af1a7d6ec8eb52 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon <boris.brezillon@free-electrons.com> +Date: Tue, 21 Oct 2014 14:40:42 +0200 +Subject: [PATCH] mtd: nand: sunxi: Add HW randomizer support + +Add support for the HW randomizer available on the sunxi nand controller. + +Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/sunxi_nand.c | 603 ++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 585 insertions(+), 18 deletions(-) + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index c3e0473..2f6ab39 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -206,10 +206,12 @@ struct sunxi_nand_hw_ecc { + * + * @part: base paritition structure + * @ecc: per-partition ECC info ++ * @rnd: per-partition randomizer info + */ + struct sunxi_nand_part { + struct nand_part part; + struct nand_ecc_ctrl ecc; ++ struct nand_rnd_ctrl rnd; + }; + + static inline struct sunxi_nand_part * +@@ -219,6 +221,29 @@ to_sunxi_nand_part(struct nand_part *part) + } + + /* ++ * sunxi NAND randomizer structure: stores NAND randomizer information ++ * ++ * @page: current page ++ * @column: current column ++ * @nseeds: seed table size ++ * @seeds: seed table ++ * @subseeds: pre computed sub seeds ++ * @step: step function ++ * @left: number of remaining bytes in the page ++ * @state: current randomizer state ++ */ ++struct sunxi_nand_hw_rnd { ++ int page; ++ int column; ++ int nseeds; ++ u16 *seeds; ++ u16 *subseeds; ++ u16 (*step)(struct mtd_info *mtd, u16 state, int column, int *left); ++ int left; ++ u16 state; ++}; ++ ++/* + * NAND chip structure: stores NAND chip device related information + * + * @node: used to store NAND chips into a list +@@ -233,6 +258,7 @@ struct sunxi_nand_chip { + struct list_head node; + struct nand_chip nand; + struct mtd_info mtd; ++ void *buffer; + unsigned long clk_rate; + int selected; + int nsels; +@@ -489,6 +515,185 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, + } + } + ++static u16 sunxi_nfc_hwrnd_step(struct sunxi_nand_hw_rnd *rnd, u16 state, int count) ++{ ++ state &= 0x7fff; ++ count *= 8; ++ while (count--) ++ state = ((state >> 1) | ++ ((((state >> 0) ^ (state >> 1)) & 1) << 14)) & 0x7fff; ++ ++ return state; ++} ++ ++static u16 sunxi_nfc_hwrnd_single_step(u16 state, int count) ++{ ++ state &= 0x7fff; ++ while (count--) ++ state = ((state >> 1) | ++ ((((state >> 0) ^ (state >> 1)) & 1) << 14)) & 0x7fff; ++ ++ return state; ++} ++ ++static int sunxi_nfc_hwrnd_config(struct mtd_info *mtd, int page, int column, ++ enum nand_rnd_action action) ++{ ++ struct nand_chip *nand = mtd->priv; ++ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); ++ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; ++ u16 state; ++ ++ if (page < 0 && column < 0) { ++ rnd->page = -1; ++ rnd->column = -1; ++ return 0; ++ } ++ ++ if (column < 0) ++ column = 0; ++ if (page < 0) ++ page = rnd->page; ++ ++ if (page < 0) ++ return -EINVAL; ++ ++ if (page != rnd->page && action == NAND_RND_READ) { ++ int status; ++ ++ status = nand_page_get_status(mtd, page); ++ if (status == NAND_PAGE_STATUS_UNKNOWN) { ++ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); ++ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, ++ mtd->writesize + mtd->oobsize); ++ ++ if (nand_page_is_empty(mtd, sunxi_nand->buffer, ++ sunxi_nand->buffer + ++ mtd->writesize)) ++ status = NAND_PAGE_EMPTY; ++ else ++ status = NAND_PAGE_FILLED; ++ ++ nand_page_set_status(mtd, page, status); ++ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, column, -1); ++ } ++ } ++ ++ state = rnd->seeds[page % rnd->nseeds]; ++ rnd->page = page; ++ rnd->column = column; ++ ++ if (rnd->step) { ++ rnd->state = rnd->step(mtd, state, column, &rnd->left); ++ } else { ++ rnd->state = sunxi_nfc_hwrnd_step(rnd, state, column % 4096); ++ rnd->left = mtd->oobsize + mtd->writesize - column; ++ } ++ ++ return 0; ++} ++ ++static void sunxi_nfc_hwrnd_write_buf(struct mtd_info *mtd, const uint8_t *buf, ++ int len) ++{ ++ struct nand_chip *nand = mtd->priv; ++ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); ++ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; ++ u32 tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ int cnt; ++ int offs = 0; ++ int rndactiv; ++ ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_RANDOM_SEED | NFC_RANDOM_EN); ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); ++ ++ if (rnd->page < 0) { ++ sunxi_nfc_write_buf(mtd, buf, len); ++ return; ++ } ++ ++ while (len > offs) { ++ cnt = len - offs; ++ if (cnt > 1024) ++ cnt = 1024; ++ ++ rndactiv = nand_rnd_is_activ(mtd, rnd->page, rnd->column, ++ &cnt); ++ if (rndactiv > 0) { ++ writel(tmp | NFC_RANDOM_EN | (rnd->state << 16), ++ nfc->regs + NFC_REG_ECC_CTL); ++ if (rnd->left < cnt) ++ cnt = rnd->left; ++ } ++ ++ sunxi_nfc_write_buf(mtd, buf + offs, cnt); ++ ++ if (rndactiv > 0) ++ writel(tmp & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); ++ ++ offs += cnt; ++ if (len <= offs) ++ break; ++ ++ sunxi_nfc_hwrnd_config(mtd, -1, rnd->column + cnt, NAND_RND_WRITE); ++ } ++} ++ ++static void sunxi_nfc_hwrnd_read_buf(struct mtd_info *mtd, uint8_t *buf, ++ int len) ++{ ++ struct nand_chip *nand = mtd->priv; ++ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); ++ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; ++ u32 tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ int cnt; ++ int offs = 0; ++ int rndactiv; ++ ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_RANDOM_SEED | NFC_RANDOM_EN); ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); ++ ++ if (rnd->page < 0) { ++ sunxi_nfc_read_buf(mtd, buf, len); ++ return; ++ } ++ ++ while (len > offs) { ++ cnt = len - offs; ++ if (cnt > 1024) ++ cnt = 1024; ++ ++ if (nand_page_get_status(mtd, rnd->page) != NAND_PAGE_EMPTY && ++ nand_rnd_is_activ(mtd, rnd->page, rnd->column, &cnt) > 0) ++ rndactiv = 1; ++ else ++ rndactiv = 0; ++ ++ if (rndactiv > 0) { ++ writel(tmp | NFC_RANDOM_EN | (rnd->state << 16), ++ nfc->regs + NFC_REG_ECC_CTL); ++ if (rnd->left < cnt) ++ cnt = rnd->left; ++ } ++ ++ if (buf) ++ sunxi_nfc_read_buf(mtd, buf + offs, cnt); ++ else ++ sunxi_nfc_read_buf(mtd, NULL, cnt); ++ ++ if (rndactiv > 0) ++ writel(tmp & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); ++ ++ offs += cnt; ++ if (len <= offs) ++ break; ++ ++ sunxi_nfc_hwrnd_config(mtd, -1, rnd->column + cnt, NAND_RND_READ); ++ } ++} ++ + static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd) + { + uint8_t ret; +@@ -538,16 +743,43 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + int oob_required, int page) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); ++ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(chip); + struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; ++ int status; + int offset; + int ret; + u32 tmp; + int i; + int cnt; + ++ status = nand_page_get_status(mtd, page); ++ if (status == NAND_PAGE_STATUS_UNKNOWN) { ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); ++ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, ++ mtd->writesize + mtd->oobsize); ++ ++ if (nand_page_is_empty(mtd, sunxi_nand->buffer, ++ sunxi_nand->buffer + ++ mtd->writesize)) { ++ status = NAND_PAGE_EMPTY; ++ } else { ++ status = NAND_PAGE_FILLED; ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); ++ } ++ ++ nand_page_set_status(mtd, page, status); ++ } ++ ++ if (status == NAND_PAGE_EMPTY) { ++ memset(buf, 0xff, mtd->writesize); ++ if (oob_required) ++ memset(chip->oob_poi, 0xff, mtd->oobsize); ++ return 0; ++ } ++ + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | +@@ -556,12 +788,15 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { ++ bool rndactiv = false; ++ + if (i) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, i * ecc->size, -1); + + offset = mtd->writesize + layout->eccpos[i * ecc->bytes] - 4; + +- chip->read_buf(mtd, NULL, ecc->size); ++ nand_rnd_config(mtd, page, i * ecc->size, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, NULL, ecc->size); + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + +@@ -569,6 +804,25 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + if (ret) + return ret; + ++ if (i) { ++ cnt = ecc->bytes + 4; ++ if (nand_rnd_is_activ(mtd, page, offset, &cnt) > 0 && ++ cnt == ecc->bytes + 4) ++ rndactiv = true; ++ } else { ++ cnt = ecc->bytes + 2; ++ if (nand_rnd_is_activ(mtd, page, offset + 2, &cnt) > 0 && ++ cnt == ecc->bytes + 2) ++ rndactiv = true; ++ } ++ ++ if (rndactiv) { ++ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); ++ tmp |= NFC_RANDOM_EN; ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); ++ } ++ + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); + +@@ -579,6 +833,9 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + memcpy_fromio(buf + (i * ecc->size), + nfc->regs + NFC_RAM0_BASE, ecc->size); + ++ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); ++ + if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { + mtd->ecc_stats.failed++; + } else { +@@ -594,9 +851,10 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + if (ret) + return ret; + ++ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); + offset -= mtd->writesize; +- chip->read_buf(mtd, chip->oob_poi + offset, +- ecc->bytes + 4); ++ nand_rnd_read_buf(mtd, chip->oob_poi + offset, ++ ecc->bytes + 4); + } + } + +@@ -606,11 +864,14 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + offset = mtd->writesize + + ecc->layout->oobfree[ecc->steps].offset; + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); + offset -= mtd->writesize; +- chip->read_buf(mtd, chip->oob_poi + offset, cnt); ++ nand_rnd_read_buf(mtd, chip->oob_poi + offset, cnt); + } + } + ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); ++ + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; + +@@ -627,6 +888,7 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; ++ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; + int offset; + int ret; + u32 tmp; +@@ -641,22 +903,56 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { ++ bool rndactiv = false; ++ u8 oob_buf[4]; ++ + if (i) + chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1); + +- chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); ++ nand_rnd_config(mtd, -1, i * ecc->size, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, buf + (i * ecc->size), ecc->size); + + offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; + + /* Fill OOB data in */ +- if (oob_required) { +- tmp = 0xffffffff; +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, +- 4); ++ if (!oob_required) ++ memset(oob_buf, 0xff, 4); ++ else ++ memcpy(oob_buf, ++ chip->oob_poi + layout->oobfree[i].offset, ++ 4); ++ ++ ++ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); ++ ++ if (i) { ++ cnt = ecc->bytes + 4; ++ if (rnd && ++ nand_rnd_is_activ(mtd, -1, offset, &cnt) > 0 && ++ cnt == ecc->bytes + 4) ++ rndactiv = true; + } else { +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, +- chip->oob_poi + offset - mtd->writesize, +- 4); ++ cnt = ecc->bytes + 2; ++ if (rnd && ++ nand_rnd_is_activ(mtd, -1, offset + 2, &cnt) > 0 && ++ cnt == ecc->bytes + 2) ++ rndactiv = true; ++ } ++ ++ if (rndactiv) { ++ /* pre randomize to generate FF patterns on the NAND */ ++ if (!i) { ++ u16 state = rnd->subseeds[rnd->page % rnd->nseeds]; ++ state = sunxi_nfc_hwrnd_single_step(state, 15); ++ oob_buf[0] ^= state; ++ state = sunxi_nfc_hwrnd_step(rnd, state, 1); ++ oob_buf[1] ^= state; ++ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); ++ } ++ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); ++ tmp |= NFC_RANDOM_EN; ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + } + + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); +@@ -671,6 +967,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + return ret; ++ ++ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); + } + + if (oob_required) { +@@ -679,11 +978,14 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + offset = mtd->writesize + + ecc->layout->oobfree[i].offset; + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); + offset -= mtd->writesize; +- chip->write_buf(mtd, chip->oob_poi + offset, cnt); ++ nand_rnd_write_buf(mtd, chip->oob_poi + offset, cnt); + } + } + ++ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); ++ + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; + +@@ -692,22 +994,76 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + return 0; + } + ++static u16 sunxi_nfc_hw_ecc_rnd_steps(struct mtd_info *mtd, u16 state, ++ int column, int *left) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; ++ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; ++ int nblks = mtd->writesize / ecc->size; ++ int modsize = ecc->size; ++ int steps; ++ ++ if (column < mtd->writesize) { ++ steps = column % modsize; ++ *left = modsize - steps; ++ } else if (column < mtd->writesize + ++ (nblks * (ecc->bytes + 4))) { ++ column -= mtd->writesize; ++ steps = column % (ecc->bytes + 4); ++ *left = ecc->bytes + 4 - steps; ++ state = rnd->subseeds[rnd->page % rnd->nseeds]; ++ } else { ++ steps = column % 4096; ++ *left = mtd->writesize + mtd->oobsize - column; ++ } ++ ++ return sunxi_nfc_hwrnd_step(rnd, state, steps); ++} ++ + static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, + uint8_t *buf, int oob_required, + int page) + { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); ++ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(chip); + struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; + uint8_t *oob = chip->oob_poi; + int offset = 0; + int ret; ++ int status; + int cnt; + u32 tmp; + int i; + ++ status = nand_page_get_status(mtd, page); ++ if (status == NAND_PAGE_STATUS_UNKNOWN) { ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); ++ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, ++ mtd->writesize + mtd->oobsize); ++ ++ if (nand_page_is_empty(mtd, sunxi_nand->buffer, ++ sunxi_nand->buffer + ++ mtd->writesize)) { ++ status = NAND_PAGE_EMPTY; ++ } else { ++ status = NAND_PAGE_FILLED; ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); ++ } ++ ++ nand_page_set_status(mtd, page, status); ++ } ++ ++ if (status == NAND_PAGE_EMPTY) { ++ memset(buf, 0xff, mtd->writesize); ++ if (oob_required) ++ memset(chip->oob_poi, 0xff, mtd->oobsize); ++ return 0; ++ } ++ + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | +@@ -716,7 +1072,17 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { +- chip->read_buf(mtd, NULL, ecc->size); ++ nand_rnd_config(mtd, page, offset, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, NULL, ecc->size); ++ ++ cnt = ecc->bytes + 4; ++ if (nand_rnd_is_activ(mtd, page, offset, &cnt) > 0 && ++ cnt == ecc->bytes + 4) { ++ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); ++ tmp |= NFC_RANDOM_EN; ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); ++ } + + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); +@@ -729,6 +1095,9 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + buf += ecc->size; + offset += ecc->size; + ++ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); ++ + if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { + mtd->ecc_stats.failed++; + } else { +@@ -739,7 +1108,8 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + + if (oob_required) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); +- chip->read_buf(mtd, oob, ecc->bytes + ecc->prepad); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, ecc->bytes + ecc->prepad); + oob += ecc->bytes + ecc->prepad; + } + +@@ -750,10 +1120,13 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + cnt = mtd->oobsize - (oob - chip->oob_poi); + if (cnt > 0) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); +- chip->read_buf(mtd, oob, cnt); ++ nand_rnd_config(mtd, page, offset, NAND_RND_READ); ++ nand_rnd_read_buf(mtd, oob, cnt); + } + } + ++ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); ++ + writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN, + nfc->regs + NFC_REG_ECC_CTL); + +@@ -768,6 +1141,7 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); + struct nand_ecc_ctrl *ecc = chip->cur_ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; ++ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; + uint8_t *oob = chip->oob_poi; + int offset = 0; + int ret; +@@ -783,7 +1157,8 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { +- chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, buf + (i * ecc->size), ecc->size); + offset += ecc->size; + + /* Fill OOB data in */ +@@ -796,6 +1171,16 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + 4); + } + ++ cnt = ecc->bytes + 4; ++ if (rnd && ++ nand_rnd_is_activ(mtd, rnd->page, offset, &cnt) > 0 && ++ cnt == ecc->bytes + 4) { ++ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); ++ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); ++ tmp |= NFC_RANDOM_EN; ++ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); ++ } ++ + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | + (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); +@@ -804,6 +1189,9 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + if (ret) + return ret; + ++ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, ++ nfc->regs + NFC_REG_ECC_CTL); ++ + offset += ecc->bytes + ecc->prepad; + oob += ecc->bytes + ecc->prepad; + } +@@ -812,9 +1200,11 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + cnt = mtd->oobsize - (oob - chip->oob_poi); + if (cnt > 0) { + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); +- chip->write_buf(mtd, oob, cnt); ++ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); ++ nand_rnd_write_buf(mtd, oob, cnt); + } + } ++ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; +@@ -824,6 +1214,128 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + return 0; + } + ++static u16 sunxi_nfc_hw_syndrome_ecc_rnd_steps(struct mtd_info *mtd, u16 state, ++ int column, int *left) ++{ ++ struct nand_chip *chip = mtd->priv; ++ struct nand_ecc_ctrl *ecc = chip->cur_ecc; ++ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; ++ int eccsteps = mtd->writesize / ecc->size; ++ int modsize = ecc->size + ecc->prepad + ecc->bytes; ++ int steps; ++ ++ if (column < (eccsteps * modsize)) { ++ steps = column % modsize; ++ *left = modsize - steps; ++ if (steps >= ecc->size) { ++ steps -= ecc->size; ++ state = rnd->subseeds[rnd->page % rnd->nseeds]; ++ } ++ } else { ++ steps = column % 4096; ++ *left = mtd->writesize + mtd->oobsize - column; ++ } ++ ++ return sunxi_nfc_hwrnd_step(rnd, state, steps); ++} ++ ++static u16 default_seeds[] = {0x4a80}; ++ ++static void sunxi_nand_rnd_ctrl_cleanup(struct nand_rnd_ctrl *rnd) ++{ ++ struct sunxi_nand_hw_rnd *hwrnd = rnd->priv; ++ ++ if (hwrnd->seeds != default_seeds) ++ kfree(hwrnd->seeds); ++ kfree(hwrnd->subseeds); ++ kfree(rnd->layout); ++ kfree(hwrnd); ++} ++ ++static int sunxi_nand_rnd_ctrl_init(struct mtd_info *mtd, ++ struct nand_rnd_ctrl *rnd, ++ struct nand_ecc_ctrl *ecc, ++ struct device_node *np) ++{ ++ struct sunxi_nand_hw_rnd *hwrnd; ++ struct nand_rnd_layout *layout = NULL; ++ int ret; ++ ++ hwrnd = kzalloc(sizeof(*hwrnd), GFP_KERNEL); ++ if (!hwrnd) ++ return -ENOMEM; ++ ++ hwrnd->seeds = default_seeds; ++ hwrnd->nseeds = ARRAY_SIZE(default_seeds); ++ ++ if (of_get_property(np, "nand-randomizer-seeds", &ret)) { ++ hwrnd->nseeds = ret / sizeof(*hwrnd->seeds); ++ hwrnd->seeds = kzalloc(hwrnd->nseeds * sizeof(*hwrnd->seeds), ++ GFP_KERNEL); ++ if (!hwrnd->seeds) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ ret = of_property_read_u16_array(np, "nand-randomizer-seeds", ++ hwrnd->seeds, hwrnd->nseeds); ++ if (ret) ++ goto err; ++ } ++ ++ switch (ecc->mode) { ++ case NAND_ECC_HW_SYNDROME: ++ hwrnd->step = sunxi_nfc_hw_syndrome_ecc_rnd_steps; ++ break; ++ ++ case NAND_ECC_HW: ++ hwrnd->step = sunxi_nfc_hw_ecc_rnd_steps; ++ ++ default: ++ layout = kzalloc(sizeof(*layout) + sizeof(struct nand_rndfree), ++ GFP_KERNEL); ++ if (!layout) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ layout->nranges = 1; ++ layout->ranges[0].offset = mtd->writesize; ++ layout->ranges[0].length = 2; ++ rnd->layout = layout; ++ break; ++ } ++ ++ if (ecc->mode == NAND_ECC_HW_SYNDROME || ecc->mode == NAND_ECC_HW) { ++ int i; ++ ++ hwrnd->subseeds = kzalloc(hwrnd->nseeds * ++ sizeof(*hwrnd->subseeds), ++ GFP_KERNEL); ++ if (!hwrnd->subseeds) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ for (i = 0; i < hwrnd->nseeds; i++) ++ hwrnd->subseeds[i] = sunxi_nfc_hwrnd_step(hwrnd, ++ hwrnd->seeds[i], ++ ecc->size); ++ } ++ ++ rnd->config = sunxi_nfc_hwrnd_config; ++ rnd->read_buf = sunxi_nfc_hwrnd_read_buf; ++ rnd->write_buf = sunxi_nfc_hwrnd_write_buf; ++ rnd->priv = hwrnd; ++ ++ return 0; ++ ++err: ++ kfree(hwrnd); ++ kfree(layout); ++ ++ return ret; ++} ++ + static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, + const struct nand_sdr_timings *timings) + { +@@ -1084,6 +1596,40 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd, + return 0; + } + ++static void sunxi_nand_rnd_cleanup(struct nand_rnd_ctrl *rnd) ++{ ++ switch (rnd->mode) { ++ case NAND_RND_HW: ++ sunxi_nand_rnd_ctrl_cleanup(rnd); ++ break; ++ default: ++ break; ++ } ++} ++ ++static int sunxi_nand_rnd_init(struct mtd_info *mtd, ++ struct nand_rnd_ctrl *rnd, ++ struct nand_ecc_ctrl *ecc, ++ struct device_node *np) ++{ ++ int ret; ++ ++ rnd->mode = NAND_RND_NONE; ++ ++ ret = of_get_nand_rnd_mode(np); ++ if (ret >= 0) ++ rnd->mode = ret; ++ ++ switch (rnd->mode) { ++ case NAND_RND_HW: ++ return sunxi_nand_rnd_ctrl_init(mtd, rnd, ecc, np); ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ + static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc) + { + switch (ecc->mode) { +@@ -1175,7 +1721,14 @@ struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master, + if (ret) + goto err; + ++ ret = sunxi_nand_rnd_init(master, &part->rnd, &part->ecc, pp); ++ if (ret) { ++ sunxi_nand_ecc_cleanup(&part->ecc); ++ goto err; ++ } ++ + part->part.ecc = &part->ecc; ++ part->part.rnd = &part->rnd; + + return &part->part; + +@@ -1300,18 +1853,30 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, + if (ret) + return ret; + ++ chip->buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); ++ if (!chip->buffer) ++ return -ENOMEM; ++ + ret = sunxi_nand_chip_init_timings(chip, np); + if (ret) { + dev_err(dev, "could not configure chip timings: %d\n", ret); + return ret; + } + ++ ret = nand_pst_create(mtd); ++ if (ret) ++ return ret; ++ + ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np); + if (ret) { + dev_err(dev, "ECC init failed: %d\n", ret); + return ret; + } + ++ ret = sunxi_nand_rnd_init(mtd, &nand->rnd, &nand->ecc, np); ++ if (ret) ++ return ret; ++ + ret = nand_scan_tail(mtd); + if (ret) { + dev_err(dev, "nand_scan_tail failed: %d\n", ret); +@@ -1367,6 +1932,8 @@ static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc) + node); + nand_release(&chip->mtd); + sunxi_nand_ecc_cleanup(&chip->nand.ecc); ++ sunxi_nand_rnd_cleanup(&chip->nand.rnd); ++ kfree(chip->buffer); + } + } + diff --git a/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch b/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch new file mode 100644 index 0000000000..51b0fbfd9a --- /dev/null +++ b/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch @@ -0,0 +1,66 @@ +From de994d9c849ca0ca020fccfa1916afcde7f313f2 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Sun, 24 Aug 2014 10:40:44 +0200 +Subject: [PATCH] mtd: nand: sunxi: Fallback to chip config when partition + config is not available + +Fallback to chip config for partitions where ecc/rnd config are not +specified in the device tree. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/sunxi_nand.c | 27 ++++++++++++++++++--------- + 1 file changed, 18 insertions(+), 9 deletions(-) + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index 2f6ab39..74f2caf 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -1711,28 +1711,37 @@ static void sunxi_nand_part_release(struct nand_part *part) + struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master, + struct device_node *pp) + { ++ struct nand_chip *chip = master->priv; + struct sunxi_nand_part *part; + int ret; + + part = kzalloc(sizeof(*part), GFP_KERNEL); + part->part.release = sunxi_nand_part_release; + +- ret = sunxi_nand_ecc_init(master, &part->ecc, pp); +- if (ret) +- goto err; ++ if (of_find_property(pp, "nand-ecc-mode", NULL)) { ++ ret = sunxi_nand_ecc_init(master, &part->ecc, pp); ++ if (ret) ++ goto err; + +- ret = sunxi_nand_rnd_init(master, &part->rnd, &part->ecc, pp); +- if (ret) { +- sunxi_nand_ecc_cleanup(&part->ecc); +- goto err; ++ part->part.ecc = &part->ecc; + } + +- part->part.ecc = &part->ecc; +- part->part.rnd = &part->rnd; ++ if (of_find_property(pp, "nand-rnd-mode", NULL)) { ++ ret = sunxi_nand_rnd_init(master, &part->rnd, ++ part->part.ecc ? part->part.ecc : &chip->ecc, ++ pp); ++ if (ret) ++ goto err; ++ ++ part->part.rnd = &part->rnd; ++ } + + return &part->part; + + err: ++ if (part->part.ecc) ++ sunxi_nand_ecc_cleanup(part->part.ecc); ++ + kfree(part); + return ERR_PTR(ret); + } diff --git a/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch b/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch new file mode 100644 index 0000000000..19775eb5a6 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch @@ -0,0 +1,36 @@ +From a5ba30016f4a29f5875112169a92a28a9ba7f5c9 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Mon, 25 May 2015 11:59:03 +0200 +Subject: [PATCH] mtd: nand: sunxi: Add NAND_BBT_CREATE_EMPTY to bbt_options + +The ftl format used by the Allwinner Android kernels, with which most +Allwinnner devices ship, overrides the factory bad block markers, and +fills the oob data with a pattern which causes a lot of false bad block +positives, so when we first create a bbt table, start with an empty one +to avoid marking a ton of blocks as bad from the start. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/mtd/nand/sunxi_nand.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index 74f2caf..72ab770 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -1853,6 +1853,15 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, + if (of_get_nand_on_flash_bbt(np)) + nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; + ++ /* ++ * The ftl format used by the Allwinner Android kernels overrides ++ * the factory bad block markers, and fills the oob data with a ++ * pattern which causes a lot of false bad block positives, so ++ * when we first create a bbt table, start with an empty one ++ * to avoid marking a ton of blocks as bad from the start. ++ */ ++ nand->bbt_options |= NAND_BBT_CREATE_EMPTY; ++ + mtd = &chip->mtd; + mtd->dev.parent = dev; + mtd->priv = nand; diff --git a/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch new file mode 100644 index 0000000000..91c6efbc3f --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch @@ -0,0 +1,104 @@ +From 00f9956384e3cf011e0d5ffd211847bf9336ec78 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Tue, 26 May 2015 17:01:33 +0200 +Subject: [PATCH] ARM: dts: sun4i: Add NAND controller pin definitions + +Define the NAND controller pin configs. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 80 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 80 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index abea24e..e0a737f 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -924,6 +924,86 @@ + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; ++ ++ nand_pins_a: nand_base0@0 { ++ allwinner,pins = "PC0", "PC1", "PC2", ++ "PC5", "PC8", "PC9", "PC10", ++ "PC11", "PC12", "PC13", "PC14", ++ "PC15", "PC16"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs0_pins_a: nand_cs@0 { ++ allwinner,pins = "PC4"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs1_pins_a: nand_cs@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs2_pins_a: nand_cs@2 { ++ allwinner,pins = "PC17"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs3_pins_a: nand_cs@3 { ++ allwinner,pins = "PC18"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs4_pins_a: nand_cs@4 { ++ allwinner,pins = "PC19"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs5_pins_a: nand_cs@5 { ++ allwinner,pins = "PC20"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs6_pins_a: nand_cs@6 { ++ allwinner,pins = "PC21"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs7_pins_a: nand_cs@7 { ++ allwinner,pins = "PC22"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb0_pins_a: nand_rb@0 { ++ allwinner,pins = "PC6"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb1_pins_a: nand_rb@1 { ++ allwinner,pins = "PC7"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch new file mode 100644 index 0000000000..290dbb762e --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch @@ -0,0 +1,87 @@ +From a8ad7637cec0c2c2b1322d78b142beea4621dd23 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Tue, 26 May 2015 17:18:26 +0200 +Subject: [PATCH] ARM: dts: sun5i: Add NAND controller pin definitions + +Define the NAND controller pin configs. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun5i-a10s.dtsi | 14 ++++++++++++++ + arch/arm/boot/dts/sun5i.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ + 2 files changed, 52 insertions(+) + +diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi +index f11efb7..1962ec9 100644 +--- a/arch/arm/boot/dts/sun5i-a10s.dtsi ++++ b/arch/arm/boot/dts/sun5i-a10s.dtsi +@@ -201,6 +201,20 @@ + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; ++ ++ nand_cs2_pins_a: nand_cs@2 { ++ allwinner,pins = "PC17"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs3_pins_a: nand_cs@3 { ++ allwinner,pins = "PC18"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + &sram_a { +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index 772f8d8..0dc7c96 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -544,6 +544,44 @@ + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; ++ ++ nand_pins_a: nand_base0@0 { ++ allwinner,pins = "PC0", "PC1", "PC2", ++ "PC5", "PC8", "PC9", "PC10", ++ "PC11", "PC12", "PC13", "PC14", ++ "PC15"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs0_pins_a: nand_cs@0 { ++ allwinner,pins = "PC4"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs1_pins_a: nand_cs@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb0_pins_a: nand_rb@0 { ++ allwinner,pins = "PC6"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb1_pins_a: nand_rb@1 { ++ allwinner,pins = "PC7"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch new file mode 100644 index 0000000000..5720a8b4df --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch @@ -0,0 +1,104 @@ +From 576701449b01fb0dfaa76bb71f2b94ab5194c1dc Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:08:15 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add NAND controller pin definitions + +Define the NAND controller pin configs. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 80 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 80 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 0d7e600..6ec86c9 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -1164,6 +1164,86 @@ + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; ++ ++ nand_pins_a: nand_base0@0 { ++ allwinner,pins = "PC0", "PC1", "PC2", ++ "PC5", "PC8", "PC9", "PC10", ++ "PC11", "PC12", "PC13", "PC14", ++ "PC15", "PC16"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs0_pins_a: nand_cs@0 { ++ allwinner,pins = "PC4"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs1_pins_a: nand_cs@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs2_pins_a: nand_cs@2 { ++ allwinner,pins = "PC17"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs3_pins_a: nand_cs@3 { ++ allwinner,pins = "PC18"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs4_pins_a: nand_cs@4 { ++ allwinner,pins = "PC19"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs5_pins_a: nand_cs@5 { ++ allwinner,pins = "PC20"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs6_pins_a: nand_cs@6 { ++ allwinner,pins = "PC21"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_cs7_pins_a: nand_cs@7 { ++ allwinner,pins = "PC22"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb0_pins_a: nand_rb@0 { ++ allwinner,pins = "PC6"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ nand_rb1_pins_a: nand_rb@1 { ++ allwinner,pins = "PC7"; ++ allwinner,function = "nand0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch b/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch new file mode 100644 index 0000000000..b1a9b07402 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch @@ -0,0 +1,35 @@ +From 9cc66234a20c6ba1611233a122f04f3b175ad2d3 Mon Sep 17 00:00:00 2001 +From: Boris BREZILLON <boris.brezillon@free-electrons.com> +Date: Mon, 28 Jul 2014 14:01:22 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC + +Add NAND Flash controller node definition to the A20 SoC. + +Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 6ec86c9..092adc6 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -641,6 +641,17 @@ + #dma-cells = <2>; + }; + ++ nfc: nand@01c03000 { ++ compatible = "allwinner,sun4i-a10-nand"; ++ reg = <0x01c03000 0x1000>; ++ interrupts = <0 37 4>; ++ clocks = <&ahb_gates 13>, <&nand_clk>; ++ clock-names = "ahb", "mod"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch b/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch new file mode 100644 index 0000000000..d5112609de --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch @@ -0,0 +1,35 @@ +From a5bbf2ee4ca1479e4488399a45336e003e09647f Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Tue, 26 May 2015 17:03:41 +0200 +Subject: [PATCH] ARM: dts: sun4i: Add NFC node to Allwinner A10 SoC + +Add NAND Flash controller node definition to the A10 SoC. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index e0a737f..7cd636d 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -514,6 +514,17 @@ + #dma-cells = <2>; + }; + ++ nfc: nand@01c03000 { ++ compatible = "allwinner,sun4i-a10-nand"; ++ reg = <0x01c03000 0x1000>; ++ interrupts = <37>; ++ clocks = <&ahb_gates 13>, <&nand_clk>; ++ clock-names = "ahb", "mod"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch b/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch new file mode 100644 index 0000000000..163130e4d9 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch @@ -0,0 +1,34 @@ +From 22ef77b0ba8fa347fe4b8c4c05d0bf0d08f4c141 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Tue, 26 May 2015 18:01:50 +0200 +Subject: [PATCH] ARM: dts: sun5i: Add NFC node to Allwinner A13/A10s SoC + +Add NAND Flash controller node definition to the A13/a10s SoC. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun5i.dtsi | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index 0dc7c96..801ab01 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -353,6 +353,17 @@ + #dma-cells = <2>; + }; + ++ nfc: nand@01c03000 { ++ compatible = "allwinner,sun4i-a10-nand"; ++ reg = <0x01c03000 0x1000>; ++ interrupts = <37>; ++ clocks = <&ahb_gates 13>, <&nand_clk>; ++ clock-names = "ahb", "mod"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch b/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch new file mode 100644 index 0000000000..72763644b6 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch @@ -0,0 +1,79 @@ +From f84e215756932c495bc92c50d40d8cd6773822bb Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Tue, 26 May 2015 21:06:22 +0200 +Subject: [PATCH] ARM: dts: sun5i: Enable NAND on A13 OLinuxIno board + +Add a node describing the NAND controller and partitions. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 59 +++++++++++++++++++++++++++++++ + 1 file changed, 59 insertions(+) + +diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +index b3c234c..fd1e921 100644 +--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts ++++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +@@ -155,3 +155,62 @@ + status = "okay"; + }; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-ecc-strength = <40>; ++ nand-ecc-step-size = <1024>; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch b/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch new file mode 100644 index 0000000000..b632db1f1a --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch @@ -0,0 +1,65 @@ +diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +index 39a51d5..f35957d 100644 +--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts ++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +@@ -142,3 +142,60 @@ + status = "okay"; + }; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a>, <&nand_cs0_pins_a>, <&nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch b/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch new file mode 100644 index 0000000000..1f742a9de1 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch @@ -0,0 +1,78 @@ +From e9f0391c7fccd13dfc07b470775b417d18d7df3b Mon Sep 17 00:00:00 2001 +From: Michal Suchanek <hramrach@gmail.com> +Date: Fri, 12 Dec 2014 19:19:12 +0100 +Subject: [PATCH] ARM: dts: sun4i: Enable NAND on cubieboard + +Add a node describing the NAND controller and partitions. + +Signed-off-by: Michal Suchanek <hramrach@gmail.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 57 ++++++++++++++++++++++++++++++ + 1 file changed, 57 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +index 046a84d..a6faca3 100644 +--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts ++++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +@@ -147,3 +147,60 @@ + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch b/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch new file mode 100644 index 0000000000..b948c203ae --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch @@ -0,0 +1,67 @@ +diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +index b3c234c..fd1e921 100644 +--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts ++++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +@@ -155,3 +155,62 @@ + status = "okay"; + }; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-ecc-strength = <40>; ++ nand-ecc-step-size = <1024>; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch b/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch new file mode 100644 index 0000000000..bb817c1241 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch @@ -0,0 +1,67 @@ +diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts +index b3c234c..fd1e921 100644 +--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts ++++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts +@@ -155,3 +155,62 @@ + status = "okay"; + }; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-ecc-strength = <40>; ++ nand-ecc-step-size = <1024>; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch b/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch new file mode 100644 index 0000000000..25418b5db5 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch @@ -0,0 +1,67 @@ +diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +index b3c234c..fd1e921 100644 +--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts ++++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +@@ -155,3 +155,62 @@ + status = "okay"; + }; + }; ++&nfc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; ++ status = "okay"; ++ ++ nand@0 { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ reg = <0>; ++ allwinner,rb = <0>; ++ ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-ecc-strength = <40>; ++ nand-ecc-step-size = <1024>; ++ nand-on-flash-bbt; ++ ++ boot0@0 { ++ label = "boot0"; ++ reg = /bits/ 64 <0x0 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ boot0-rescue@200000 { ++ label = "boot0-rescue"; ++ reg = /bits/ 64 <0x200000 0x200000>; ++ nand-ecc-mode = "hw_syndrome"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 <0x4a80>; ++ }; ++ ++ main@200000 { ++ label = "main"; ++ reg = /bits/ 64 <0x400000 0xffc00000>; ++ nand-ecc-mode = "hw"; ++ nand-rnd-mode = "hw"; ++ nand-randomizer-seeds = /bits/ 16 < ++ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 ++ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 ++ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d ++ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 ++ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 ++ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 ++ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb ++ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 ++ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 ++ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 ++ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 ++ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e ++ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 ++ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b ++ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d ++ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; ++ }; ++ }; ++}; ++ diff --git a/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch b/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch new file mode 100644 index 0000000000..9df18a3170 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch @@ -0,0 +1,188 @@ +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index c2e1232..f561c68 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -3611,6 +3611,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type) + static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + struct nand_flash_dev *type, u8 *id_data, int *busw) + { ++ int mode; ++ + if (!strncmp(type->id, id_data, type->id_len)) { + mtd->writesize = type->pagesize; + mtd->erasesize = type->erasesize; +@@ -3621,8 +3623,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + chip->options |= type->options; + chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); + chip->ecc_step_ds = NAND_ECC_STEP(type); +- chip->onfi_timing_mode_default = +- type->onfi_timing_mode_default; ++ ++ mode = type->onfi_timing_mode_default; ++ chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode); + + *busw = type->options & NAND_BUSWIDTH_16; + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index 5095a32..72e4135 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -1083,7 +1083,7 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, + + mode = onfi_get_async_timing_mode(&chip->nand); + if (mode == ONFI_TIMING_MODE_UNKNOWN) { +- mode = chip->nand.onfi_timing_mode_default; ++ timings = chip->nand.sdr_timings; + } else { + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + +@@ -1097,9 +1097,10 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, + feature); + if (ret) + return ret; ++ ++ timings = onfi_async_timing_mode_to_sdr_timings(mode); + } + +- timings = onfi_async_timing_mode_to_sdr_timings(mode); + if (IS_ERR(timings)) + return PTR_ERR(timings); + +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 3d4ea7e..2eb92a3 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -536,6 +536,55 @@ struct nand_buffers { + uint8_t *databuf; + }; + ++/* ++ * struct nand_sdr_timings - SDR NAND chip timings ++ * ++ * This struct defines the timing requirements of a SDR NAND chip. ++ * These informations can be found in every NAND datasheets and the timings ++ * meaning are described in the ONFI specifications: ++ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing ++ * Parameters) ++ * ++ * All these timings are expressed in picoseconds. ++ */ ++ ++struct nand_sdr_timings { ++ u32 tALH_min; ++ u32 tADL_min; ++ u32 tALS_min; ++ u32 tAR_min; ++ u32 tCEA_max; ++ u32 tCEH_min; ++ u32 tCH_min; ++ u32 tCHZ_max; ++ u32 tCLH_min; ++ u32 tCLR_min; ++ u32 tCLS_min; ++ u32 tCOH_min; ++ u32 tCS_min; ++ u32 tDH_min; ++ u32 tDS_min; ++ u32 tFEAT_max; ++ u32 tIR_min; ++ u32 tITC_max; ++ u32 tRC_min; ++ u32 tREA_max; ++ u32 tREH_min; ++ u32 tRHOH_min; ++ u32 tRHW_min; ++ u32 tRHZ_max; ++ u32 tRLOH_min; ++ u32 tRP_min; ++ u32 tRR_min; ++ u64 tRST_max; ++ u32 tWB_max; ++ u32 tWC_min; ++ u32 tWH_min; ++ u32 tWHR_min; ++ u32 tWP_min; ++ u32 tWW_min; ++}; ++ + /** + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the +@@ -600,11 +649,7 @@ struct nand_buffers { + * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, + * also from the datasheet. It is the recommended ECC step + * size, if known; if unknown, set to zero. +- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is +- * either deduced from the datasheet if the NAND +- * chip is not ONFI compliant or set to 0 if it is +- * (an ONFI chip is always configured in mode 0 +- * after a NAND reset) ++ * @sdr_timings [INTERN] Pointer to default timings for SDR NAND. + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 +@@ -689,7 +734,7 @@ struct nand_chip { + uint8_t bits_per_cell; + uint16_t ecc_strength_ds; + uint16_t ecc_step_ds; +- int onfi_timing_mode_default; ++ const struct nand_sdr_timings *sdr_timings; + int badblockpos; + int badblockbits; + +@@ -975,55 +1020,6 @@ static inline int jedec_feature(struct nand_chip *chip) + : 0; + } + +-/* +- * struct nand_sdr_timings - SDR NAND chip timings +- * +- * This struct defines the timing requirements of a SDR NAND chip. +- * These informations can be found in every NAND datasheets and the timings +- * meaning are described in the ONFI specifications: +- * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing +- * Parameters) +- * +- * All these timings are expressed in picoseconds. +- */ +- +-struct nand_sdr_timings { +- u32 tALH_min; +- u32 tADL_min; +- u32 tALS_min; +- u32 tAR_min; +- u32 tCEA_max; +- u32 tCEH_min; +- u32 tCH_min; +- u32 tCHZ_max; +- u32 tCLH_min; +- u32 tCLR_min; +- u32 tCLS_min; +- u32 tCOH_min; +- u32 tCS_min; +- u32 tDH_min; +- u32 tDS_min; +- u32 tFEAT_max; +- u32 tIR_min; +- u32 tITC_max; +- u32 tRC_min; +- u32 tREA_max; +- u32 tREH_min; +- u32 tRHOH_min; +- u32 tRHW_min; +- u32 tRHZ_max; +- u32 tRLOH_min; +- u32 tRP_min; +- u32 tRR_min; +- u64 tRST_max; +- u32 tWB_max; +- u32 tWC_min; +- u32 tWH_min; +- u32 tWHR_min; +- u32 tWP_min; +- u32 tWW_min; +-}; +- + /* get timing characteristics from ONFI timing mode. */ + const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); + #endif /* __LINUX_MTD_NAND_H */ diff --git a/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch b/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch new file mode 100644 index 0000000000..d7a396396f --- /dev/null +++ b/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch @@ -0,0 +1,32 @@ +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index f561c68..8e636df 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -3624,8 +3624,13 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); + chip->ecc_step_ds = NAND_ECC_STEP(type); + +- mode = type->onfi_timing_mode_default; +- chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode); ++ if (type->custom_sdr_timing) { ++ chip->sdr_timings = type->custom_sdr_timing; ++ } else { ++ mode = type->onfi_timing_mode_default; ++ chip->sdr_timings = ++ onfi_async_timing_mode_to_sdr_timings(mode); ++ } + + *busw = type->options & NAND_BUSWIDTH_16; + +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 2eb92a3..7d9e599 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -863,6 +863,7 @@ struct nand_flash_dev { + uint16_t step_ds; + } ecc; + int onfi_timing_mode_default; ++ const struct nand_sdr_timings *custom_sdr_timing; + }; + + /** diff --git a/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch b/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch new file mode 100644 index 0000000000..e2f591e999 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch @@ -0,0 +1,65 @@ +diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c +index dd620c1..15b4a03 100644 +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -19,6 +19,49 @@ + #define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16) + + /* ++ * Hynix H27UBG8T2BTR timings ++ * This chip has an exceptionally large tADL, which results in only supporting ++ * ONFI timing mode 0. Using these timings, the clock can be raised from ++ * 12.5MHz to 50MHz. ++ */ ++const struct nand_sdr_timings hynix_h27ubg8t2btr_sdr_timing = { ++ .tADL_min = 200000, ++ .tALH_min = 5000, ++ .tALS_min = 10000, ++ .tAR_min = 10000, ++ .tCEA_max = 100000, ++ .tCEH_min = 20000, ++ .tCH_min = 5000, ++ .tCHZ_max = 50000, ++ .tCLH_min = 5000, ++ .tCLR_min = 10000, ++ .tCLS_min = 10000, ++ .tCOH_min = 15000, ++ .tCS_min = 20000, ++ .tDH_min = 5000, ++ .tDS_min = 10000, ++ .tFEAT_max = 1000000, ++ .tIR_min = 0, ++ .tITC_max = 1000000, ++ .tRC_min = 20000, ++ .tREA_max = 16000, ++ .tREH_min = 8000, ++ .tRHOH_min = 15000, ++ .tRHW_min = 100000, ++ .tRHZ_max = 100000, ++ .tRLOH_min = 5000, ++ .tRP_min = 10000, ++ .tRST_max = 500000000, ++ .tWB_max = 100000, ++ .tRR_min = 20000, ++ .tWC_min = 20000, ++ .tWH_min = 10000, ++ .tWHR_min = 80000, ++ .tWP_min = 8000, ++ .tWW_min = 100000, ++}; ++ ++/* + * The chip ID list: + * name, device ID, page size, chip size in MiB, eraseblock size, options + * +@@ -50,6 +93,10 @@ struct nand_flash_dev nand_flash_ids[] = { + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, + SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), + 4 }, ++ {"H27UBG8T2BTR-BC 64G 3.3V 8-bit", ++ { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} }, ++ SZ_8K, SZ_4K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), ++ 0, &hynix_h27ubg8t2btr_sdr_timing }, + + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch b/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch new file mode 100644 index 0000000000..362ed698a5 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch @@ -0,0 +1,98 @@ +From b1488f1a55da6a297ac4e8e9140922f35b7583c5 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon <boris.brezillon@free-electrons.com> +Date: Mon, 15 Jun 2015 11:09:58 +0200 +Subject: [PATCH] nand: sunxi: fix write to USER_DATA reg + +The USER_DATA register cannot be updated with readb on A13 SoCs, thus +triggering a bug when using memcpy_toio on this register. +Use writel (plus a temporary variable to old the USER_DATA value) to +address that problem. + +Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> +--- + drivers/mtd/nand/sunxi_nand.c | 38 +++++++++++++++++++++----------------- + 1 file changed, 21 insertions(+), 17 deletions(-) + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index 72ab770..3668197 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -904,7 +904,7 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + + for (i = 0; i < ecc->steps; i++) { + bool rndactiv = false; +- u8 oob_buf[4]; ++ u32 user_data; + + if (i) + chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1); +@@ -915,15 +915,13 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; + + /* Fill OOB data in */ +- if (!oob_required) +- memset(oob_buf, 0xff, 4); +- else +- memcpy(oob_buf, +- chip->oob_poi + layout->oobfree[i].offset, +- 4); +- +- +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); ++ if (!oob_required) { ++ user_data = 0xffffffff; ++ } else { ++ memcpy(&user_data, ++ chip->oob_poi + layout->oobfree[i].offset, 4); ++ user_data = le32_to_cpu(user_data); ++ } + + if (i) { + cnt = ecc->bytes + 4; +@@ -942,12 +940,16 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + if (rndactiv) { + /* pre randomize to generate FF patterns on the NAND */ + if (!i) { ++ u8 oob_tmp[2]; + u16 state = rnd->subseeds[rnd->page % rnd->nseeds]; ++ oob_tmp[0] = user_data; ++ oob_tmp[1] = user_data >> 8; + state = sunxi_nfc_hwrnd_single_step(state, 15); +- oob_buf[0] ^= state; ++ oob_tmp[0] ^= state; + state = sunxi_nfc_hwrnd_step(rnd, state, 1); +- oob_buf[1] ^= state; +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); ++ oob_tmp[1] ^= state; ++ user_data &= ~0xffff; ++ user_data |= oob_tmp[0] | (oob_tmp[1] << 8); + } + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); +@@ -955,6 +957,8 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + } + ++ writel(user_data, nfc->regs + NFC_REG_USER_DATA_BASE); ++ + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); +@@ -1164,13 +1168,13 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + /* Fill OOB data in */ + if (oob_required) { + tmp = 0xffffffff; +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, +- 4); + } else { +- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob, +- 4); ++ memcpy(&tmp, oob, sizeof(tmp)); ++ tmp = le32_to_cpu(tmp); + } + ++ writel(tmp, nfc->regs + NFC_REG_USER_DATA_BASE); ++ + cnt = ecc->bytes + 4; + if (rnd && + nand_rnd_is_activ(mtd, rnd->page, offset, &cnt) > 0 && diff --git a/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch b/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch new file mode 100644 index 0000000000..295865bbe5 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch @@ -0,0 +1,88 @@ +From 8a7013f47196abed7e6a40e93d1de1639cd46228 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Fri, 10 Jul 2015 17:03:03 +0200 +Subject: [PATCH] mmc: sunxi: Don't start commands while the card is busy + +Some sdio wifi modules have not been working reliable with the sunxi-mmc +host code. This turns out to be caused by it starting new commands while +the card signals that it is still busy processing a previous command. + +This commit fixes this, thereby fixing the wifi reliability issues on +the Cubietruck and other sunxi boards using sdio wifi. + +Reported-by: Eugene K <sigintmailru@gmail.com> +Suggested-by: Eugene K <sigintmailru@gmail.com> +Cc: Eugene K <sigintmailru@gmail.com> +Cc: Arend van Spriel <arend@broadcom.com> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- +Changes in v2: +-Properly accredit Eugene K for coming up with the fix for this +--- + drivers/mmc/host/sunxi-mmc.c | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c +index 4d3e1ff..daa90b7 100644 +--- a/drivers/mmc/host/sunxi-mmc.c ++++ b/drivers/mmc/host/sunxi-mmc.c +@@ -289,6 +289,24 @@ static int sunxi_mmc_init_host(struct mmc_host *mmc) + return 0; + } + ++/* Wait for card to report ready before starting a new cmd */ ++static int sunxi_mmc_wait_card_ready(struct sunxi_mmc_host *host) ++{ ++ unsigned long expire = jiffies + msecs_to_jiffies(500); ++ u32 rval; ++ ++ do { ++ rval = mmc_readl(host, REG_STAS); ++ } while (time_before(jiffies, expire) && (rval & SDXC_CARD_DATA_BUSY)); ++ ++ if (rval & SDXC_CARD_DATA_BUSY) { ++ dev_err(mmc_dev(host->mmc), "Error R1 ready timeout\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ + static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, + struct mmc_data *data) + { +@@ -383,6 +401,8 @@ static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host, + u32 arg, cmd_val, ri; + unsigned long expire = jiffies + msecs_to_jiffies(1000); + ++ sunxi_mmc_wait_card_ready(host); ++ + cmd_val = SDXC_START | SDXC_RESP_EXPIRE | + SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC; + +@@ -597,6 +617,11 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) + { + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; ++ int ret; ++ ++ ret = sunxi_mmc_wait_card_ready(host); ++ if (ret) ++ return ret; + + rval = mmc_readl(host, REG_CLKCR); + rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); +@@ -785,6 +810,13 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) + return; + } + ++ ret = sunxi_mmc_wait_card_ready(host); ++ if (ret) { ++ mrq->cmd->error = ret; ++ mmc_request_done(mmc, mrq); ++ return; ++ } ++ + if (data) { + ret = sunxi_mmc_map_dma(host, data); + if (ret < 0) { diff --git a/target/linux/sunxi/patches-4.1/141-dt-sunxi-raise-minimum-cpu-voltage.patch b/target/linux/sunxi/patches-4.1/141-dt-sunxi-raise-minimum-cpu-voltage.patch new file mode 100644 index 0000000000..7ca26b0cdb --- /dev/null +++ b/target/linux/sunxi/patches-4.1/141-dt-sunxi-raise-minimum-cpu-voltage.patch @@ -0,0 +1,13 @@ +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 6a63f30..f5f384c 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -107,7 +107,7 @@ + 720000 1200000 + 528000 1100000 + 312000 1000000 +- 144000 900000 ++ 144000 1000000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; diff --git a/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch b/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch new file mode 100644 index 0000000000..3199cd9e82 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch @@ -0,0 +1,55 @@ +From 14a882df14a5ae859b245bc708ce3fce47a91594 Mon Sep 17 00:00:00 2001 +From: Jens Kuske <jenskuske@gmail.com> +Date: Fri, 15 May 2015 18:38:55 +0200 +Subject: ARM: sunxi: Introduce Allwinner H3 support + +The Allwinner H3 is a quad-core Cortex-A7-based SoC. It is very similar +to other sun8i family SoCs like the A23. + +Signed-off-by: Jens Kuske <jenskuske@gmail.com> +Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> + +diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt +index 42941fd..3cb4b94 100644 +--- a/Documentation/devicetree/bindings/arm/sunxi.txt ++++ b/Documentation/devicetree/bindings/arm/sunxi.txt +@@ -9,4 +9,5 @@ using one of the following compatible strings: + allwinner,sun6i-a31 + allwinner,sun7i-a20 + allwinner,sun8i-a23 ++ allwinner,sun8i-h3 + allwinner,sun9i-a80 +diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig +index 81502b9..4efe2d4 100644 +--- a/arch/arm/mach-sunxi/Kconfig ++++ b/arch/arm/mach-sunxi/Kconfig +@@ -35,7 +35,7 @@ config MACH_SUN7I + select SUN5I_HSTIMER + + config MACH_SUN8I +- bool "Allwinner A23 (sun8i) SoCs support" ++ bool "Allwinner sun8i Family SoCs support" + default ARCH_SUNXI + select ARM_GIC + select MFD_SUN6I_PRCM +diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c +index 1bc811a..8270902 100644 +--- a/arch/arm/mach-sunxi/sunxi.c ++++ b/arch/arm/mach-sunxi/sunxi.c +@@ -67,10 +67,12 @@ MACHINE_END + + static const char * const sun8i_board_dt_compat[] = { + "allwinner,sun8i-a23", ++ "allwinner,sun8i-h3", + NULL, + }; + +-DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") ++DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family") ++ .init_time = sun6i_timer_init, + .dt_compat = sun8i_board_dt_compat, + .init_late = sunxi_dt_cpufreq_init, + MACHINE_END +-- +cgit v0.10.2 + diff --git a/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch b/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch new file mode 100644 index 0000000000..6610966885 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch @@ -0,0 +1,42 @@ +diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt +index 9cdcba24d..d13c136 100644 +--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt ++++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt +@@ -4,7 +4,10 @@ This driver follows the generic DMA bindings defined in dma.txt. + + Required properties: + +-- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma" ++- compatible: Must be one of ++ "allwinner,sun6i-a31-dma" ++ "allwinner,sun8i-a23-dma" ++ "allwinner,sun8i-h3-dma" + - reg: Should contain the registers base address and length + - interrupts: Should contain a reference to the interrupt used by this device + - clocks: Should contain a reference to the parent AHB clock +diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c +index 11e5365..842ff97 100644 +--- a/drivers/dma/sun6i-dma.c ++++ b/drivers/dma/sun6i-dma.c +@@ -891,9 +891,21 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = { + .nr_max_vchans = 37, + }; + ++/* ++ * The H3 has 12 physical channels, a maximum DRQ port id of 27, ++ * and a total of 34 usable source and destination endpoints. ++ */ ++ ++static struct sun6i_dma_config sun8i_h3_dma_cfg = { ++ .nr_max_channels = 12, ++ .nr_max_requests = 27, ++ .nr_max_vchans = 34, ++}; ++ + static const struct of_device_id sun6i_dma_match[] = { + { .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg }, + { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg }, ++ { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg }, + { /* sentinel */ } + }; + diff --git a/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch b/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch new file mode 100644 index 0000000000..ea1e100a06 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch @@ -0,0 +1,1381 @@ +From 1a28c76f3965775854ed6f6229de457c3d0674ab Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Sat, 4 Apr 2015 11:37:24 +0200 +Subject: [PATCH] dma: sun4i: Add support for the DMA engine on sun[457]i SoCs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds support for the DMA engine present on Allwinner A10, +A13, A10S and A20 SoCs. This engine has two kinds of channels: normal +and dedicated. The main difference is in the mode of operation; +while a single normal channel may be operating at any given time, +dedicated channels may operate simultaneously provided there is no +overlap of source or destination. + +Hardware documentation can be found on A10 User Manual (section 12), A13 +User Manual (section 14) and A20 User Manual (section 1.12) + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + +Changes from v4: + * Fix for interrupt triggering after freeing a dma-channel, this fixed + the problems with jack + * Adjust to recent kernel dma API changes + +Changes from v3: + * Drop threaded IRQ to get lower latency + * Drop chancnt + * Fix crash on first use when using a DMA-aware bootloader (eg., one + that supports NAND) + +Changes from v2: + * Faster memcpy + * Quicker cyclic transfers + * Address some stylistic and locking comments from Maxime + * probably some more stuff I'm forgetting + +Changes from v1: + * address comments from Chen-Yu and Maxime + * fix issue converting bus width + * switch to using a threaded IRQ instead of a tasklet on + recommendation from Maxime + * fix issue setting magic timing parameter for SPI transfers + * fix an issue with list handling reported by the kbuild 0-DAY robot (thanks!) + * drop a lot of unused #define + * probably some more stuff I'm forgetting +--- + .../devicetree/bindings/dma/sun4i-dma.txt | 46 + + drivers/dma/Kconfig | 11 + + drivers/dma/Makefile | 1 + + drivers/dma/sun4i-dma.c | 1235 ++++++++++++++++++++ + 4 files changed, 1293 insertions(+) + create mode 100644 Documentation/devicetree/bindings/dma/sun4i-dma.txt + create mode 100644 drivers/dma/sun4i-dma.c + +diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt +new file mode 100644 +index 0000000..f1634a2 +--- /dev/null ++++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt +@@ -0,0 +1,46 @@ ++Allwinner A10 DMA Controller ++ ++This driver follows the generic DMA bindings defined in dma.txt. ++ ++Required properties: ++ ++- compatible: Must be "allwinner,sun4i-a10-dma" ++- reg: Should contain the registers base address and length ++- interrupts: Should contain a reference to the interrupt used by this device ++- clocks: Should contain a reference to the parent AHB clock ++- #dma-cells : Should be 2, first cell denoting normal or dedicated dma, ++ second cell holding the request line number. ++ ++Example: ++ dma: dma-controller@01c02000 { ++ compatible = "allwinner,sun4i-a10-dma"; ++ reg = <0x01c02000 0x1000>; ++ interrupts = <27>; ++ clocks = <&ahb_gates 6>; ++ #dma-cells = <2>; ++ }; ++ ++Clients: ++ ++DMA clients connected to the Allwinner A10 DMA controller must use the ++format described in the dma.txt file, using a three-cell specifier for ++each channel: a phandle plus two integer cells. ++The three cells in order are: ++ ++1. A phandle pointing to the DMA controller. ++2. Whether it is using normal (0) or dedicated (1) channels ++3. The port ID as specified in the datasheet ++ ++Example: ++ spi2: spi@01c17000 { ++ compatible = "allwinner,sun4i-a10-spi"; ++ reg = <0x01c17000 0x1000>; ++ interrupts = <0 12 4>; ++ clocks = <&ahb_gates 22>, <&spi2_clk>; ++ clock-names = "ahb", "mod"; ++ dmas = <&dma 1 29>, <&dma 1 28>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; +diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig +index fd7ac13..12372c2 100644 +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -443,6 +443,17 @@ config XGENE_DMA + help + Enable support for the APM X-Gene SoC DMA engine. + ++config SUN4I_DMA ++ tristate "Allwinner A10 DMA support" ++ depends on (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || (COMPILE_TEST && OF && ARM)) ++ default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) ++ select DMA_ENGINE ++ select DMA_OF ++ select DMA_VIRTUAL_CHANNELS ++ help ++ Enable support for the DMA controller present in the sun4i, ++ sun5i and sun7i Allwinner ARM SoCs. ++ + config DMA_ENGINE + bool + +diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile +index 69f77d5..3eba5e9 100644 +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -54,3 +54,4 @@ obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o + obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o + obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o + obj-$(CONFIG_XGENE_DMA) += xgene-dma.o ++obj-$(CONFIG_SUN4I_DMA) += sun4i-dma.o +diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c +new file mode 100644 +index 0000000..a8d55518 +--- /dev/null ++++ b/drivers/dma/sun4i-dma.c +@@ -0,0 +1,1235 @@ ++/* ++ * Copyright (C) 2014 Emilio López ++ * Emilio López <emilio@elopez.com.ar> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/bitmap.h> ++#include <linux/bitops.h> ++#include <linux/clk.h> ++#include <linux/dmaengine.h> ++#include <linux/dmapool.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/of_dma.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/spinlock.h> ++ ++#include "virt-dma.h" ++ ++/** Normal DMA register values **/ ++ ++/* Normal DMA source/destination data request type values */ ++#define NDMA_DRQ_TYPE_SDRAM 0x16 ++#define NDMA_DRQ_TYPE_LIMIT (0x1F + 1) ++ ++/** Normal DMA register layout **/ ++ ++/* Normal DMA configuration register layout */ ++#define NDMA_CFG_LOADING BIT(31) ++#define NDMA_CFG_CONT_MODE BIT(30) ++#define NDMA_CFG_WAIT_STATE(n) ((n) << 27) ++#define NDMA_CFG_DEST_DATA_WIDTH(width) ((width) << 25) ++#define NDMA_CFG_DEST_BURST_LENGTH(len) ((len) << 23) ++#define NDMA_CFG_DEST_NON_SECURE BIT(22) ++#define NDMA_CFG_DEST_FIXED_ADDR BIT(21) ++#define NDMA_CFG_DEST_DRQ_TYPE(type) ((type) << 16) ++#define NDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) ++#define NDMA_CFG_SRC_DATA_WIDTH(width) ((width) << 9) ++#define NDMA_CFG_SRC_BURST_LENGTH(len) ((len) << 7) ++#define NDMA_CFG_SRC_NON_SECURE BIT(6) ++#define NDMA_CFG_SRC_FIXED_ADDR BIT(5) ++#define NDMA_CFG_SRC_DRQ_TYPE(type) ((type) << 0) ++ ++/** Dedicated DMA register values **/ ++ ++/* Dedicated DMA source/destination address mode values */ ++#define DDMA_ADDR_MODE_LINEAR 0 ++#define DDMA_ADDR_MODE_IO 1 ++#define DDMA_ADDR_MODE_HORIZONTAL_PAGE 2 ++#define DDMA_ADDR_MODE_VERTICAL_PAGE 3 ++ ++/* Dedicated DMA source/destination data request type values */ ++#define DDMA_DRQ_TYPE_SDRAM 0x1 ++#define DDMA_DRQ_TYPE_LIMIT (0x1F + 1) ++ ++/** Dedicated DMA register layout **/ ++ ++/* Dedicated DMA configuration register layout */ ++#define DDMA_CFG_LOADING BIT(31) ++#define DDMA_CFG_BUSY BIT(30) ++#define DDMA_CFG_CONT_MODE BIT(29) ++#define DDMA_CFG_DEST_NON_SECURE BIT(28) ++#define DDMA_CFG_DEST_DATA_WIDTH(width) ((width) << 25) ++#define DDMA_CFG_DEST_BURST_LENGTH(len) ((len) << 23) ++#define DDMA_CFG_DEST_ADDR_MODE(mode) ((mode) << 21) ++#define DDMA_CFG_DEST_DRQ_TYPE(type) ((type) << 16) ++#define DDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) ++#define DDMA_CFG_SRC_NON_SECURE BIT(12) ++#define DDMA_CFG_SRC_DATA_WIDTH(width) ((width) << 9) ++#define DDMA_CFG_SRC_BURST_LENGTH(len) ((len) << 7) ++#define DDMA_CFG_SRC_ADDR_MODE(mode) ((mode) << 5) ++#define DDMA_CFG_SRC_DRQ_TYPE(type) ((type) << 0) ++ ++/* Dedicated DMA parameter register layout */ ++#define DDMA_PARA_DEST_DATA_BLK_SIZE(n) (((n) - 1) << 24) ++#define DDMA_PARA_DEST_WAIT_CYCLES(n) (((n) - 1) << 16) ++#define DDMA_PARA_SRC_DATA_BLK_SIZE(n) (((n) - 1) << 8) ++#define DDMA_PARA_SRC_WAIT_CYCLES(n) (((n) - 1) << 0) ++ ++/** DMA register offsets **/ ++ ++/* General register offsets */ ++#define DMA_IRQ_ENABLE_REG 0x0 ++#define DMA_IRQ_PENDING_STATUS_REG 0x4 ++ ++/* Normal DMA register offsets */ ++#define NDMA_CHANNEL_REG_BASE(n) (0x100 + (n) * 0x20) ++#define NDMA_CFG_REG 0x0 ++#define NDMA_SRC_ADDR_REG 0x4 ++#define NDMA_DEST_ADDR_REG 0x8 ++#define NDMA_BYTE_COUNT_REG 0xC ++ ++/* Dedicated DMA register offsets */ ++#define DDMA_CHANNEL_REG_BASE(n) (0x300 + (n) * 0x20) ++#define DDMA_CFG_REG 0x0 ++#define DDMA_SRC_ADDR_REG 0x4 ++#define DDMA_DEST_ADDR_REG 0x8 ++#define DDMA_BYTE_COUNT_REG 0xC ++#define DDMA_PARA_REG 0x18 ++ ++/** DMA Driver **/ ++ ++/* ++ * Normal DMA has 8 channels, and Dedicated DMA has another 8, so that's ++ * 16 channels. As for endpoints, there's 29 and 21 respectively. Given ++ * that the Normal DMA endpoints (other than SDRAM) can be used as tx/rx, ++ * we need 78 vchans in total ++ */ ++#define NDMA_NR_MAX_CHANNELS 8 ++#define DDMA_NR_MAX_CHANNELS 8 ++#define DMA_NR_MAX_CHANNELS (NDMA_NR_MAX_CHANNELS + DDMA_NR_MAX_CHANNELS) ++#define NDMA_NR_MAX_VCHANS (29 * 2 - 1) ++#define DDMA_NR_MAX_VCHANS 21 ++#define DMA_NR_MAX_VCHANS (NDMA_NR_MAX_VCHANS + DDMA_NR_MAX_VCHANS) ++ ++/* This set of DDMA timing parameters were found experimentally while ++ * working with the SPI driver and seem to make it behave correctly */ ++#define DDMA_MAGIC_SPI_PARAMETERS (DDMA_PARA_DEST_DATA_BLK_SIZE(1) | \ ++ DDMA_PARA_SRC_DATA_BLK_SIZE(1) | \ ++ DDMA_PARA_DEST_WAIT_CYCLES(2) | \ ++ DDMA_PARA_SRC_WAIT_CYCLES(2)) ++ ++struct sun4i_dma_pchan { ++ /* Register base of channel */ ++ void __iomem *base; ++ /* vchan currently being serviced */ ++ struct sun4i_dma_vchan *vchan; ++ /* Is this a dedicated pchan? */ ++ int is_dedicated; ++}; ++ ++struct sun4i_dma_vchan { ++ struct virt_dma_chan vc; ++ struct dma_slave_config cfg; ++ struct sun4i_dma_pchan *pchan; ++ struct sun4i_dma_promise *processing; ++ struct sun4i_dma_contract *contract; ++ u8 endpoint; ++ int is_dedicated; ++}; ++ ++struct sun4i_dma_promise { ++ u32 cfg; ++ u32 para; ++ dma_addr_t src; ++ dma_addr_t dst; ++ size_t len; ++ struct list_head list; ++}; ++ ++/* A contract is a set of promises */ ++struct sun4i_dma_contract { ++ struct virt_dma_desc vd; ++ struct list_head demands; ++ struct list_head completed_demands; ++ int is_cyclic; ++}; ++ ++struct sun4i_dma_dev { ++ DECLARE_BITMAP(pchans_used, DMA_NR_MAX_CHANNELS); ++ struct dma_device slave; ++ struct sun4i_dma_pchan *pchans; ++ struct sun4i_dma_vchan *vchans; ++ void __iomem *base; ++ struct clk *clk; ++ int irq; ++ spinlock_t lock; ++}; ++ ++static struct sun4i_dma_dev *to_sun4i_dma_dev(struct dma_device *dev) ++{ ++ return container_of(dev, struct sun4i_dma_dev, slave); ++} ++ ++static struct sun4i_dma_vchan *to_sun4i_dma_vchan(struct dma_chan *chan) ++{ ++ return container_of(chan, struct sun4i_dma_vchan, vc.chan); ++} ++ ++static struct sun4i_dma_contract *to_sun4i_dma_contract(struct virt_dma_desc *vd) ++{ ++ return container_of(vd, struct sun4i_dma_contract, vd); ++} ++ ++static struct device *chan2dev(struct dma_chan *chan) ++{ ++ return &chan->dev->device; ++} ++ ++static int convert_burst(u32 maxburst) ++{ ++ if (maxburst > 8) ++ return -EINVAL; ++ ++ /* 1 -> 0, 4 -> 1, 8 -> 2 */ ++ return (maxburst >> 2); ++} ++ ++static int convert_buswidth(enum dma_slave_buswidth addr_width) ++{ ++ if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) ++ return -EINVAL; ++ ++ /* 8 (1 byte) -> 0, 16 (2 bytes) -> 1, 32 (4 bytes) -> 2 */ ++ return (addr_width >> 1); ++} ++ ++static int choose_optimal_buswidth(dma_addr_t addr) ++{ ++ /* On 32 bit aligned addresses, we can use a 32 bit bus width */ ++ if (addr % 4 == 0) ++ return DMA_SLAVE_BUSWIDTH_4_BYTES; ++ /* On 16 bit aligned addresses, we can use a 16 bit bus width */ ++ else if (addr % 2 == 0) ++ return DMA_SLAVE_BUSWIDTH_2_BYTES; ++ ++ /* Worst-case scenario, we need to do byte aligned reads */ ++ return DMA_SLAVE_BUSWIDTH_1_BYTE; ++} ++ ++static void sun4i_dma_free_chan_resources(struct dma_chan *chan) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ ++ vchan_free_chan_resources(&vchan->vc); ++} ++ ++static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv, ++ struct sun4i_dma_vchan *vchan) ++{ ++ struct sun4i_dma_pchan *pchan = NULL, *pchans = priv->pchans; ++ unsigned long flags; ++ int i, max; ++ ++ /* ++ * pchans 0-NDMA_NR_MAX_CHANNELS are normal, and ++ * NDMA_NR_MAX_CHANNELS+ are dedicated ones ++ */ ++ if (vchan->is_dedicated) { ++ i = NDMA_NR_MAX_CHANNELS; ++ max = DMA_NR_MAX_CHANNELS; ++ } else { ++ i = 0; ++ max = NDMA_NR_MAX_CHANNELS; ++ } ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ for_each_clear_bit_from(i, &priv->pchans_used, max) { ++ pchan = &pchans[i]; ++ pchan->vchan = vchan; ++ set_bit(i, priv->pchans_used); ++ break; ++ } ++ spin_unlock_irqrestore(&priv->lock, flags); ++ ++ return pchan; ++} ++ ++static void release_pchan(struct sun4i_dma_dev *priv, ++ struct sun4i_dma_pchan *pchan) ++{ ++ unsigned long flags; ++ int nr = pchan - priv->pchans; ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ++ pchan->vchan = NULL; ++ clear_bit(nr, priv->pchans_used); ++ ++ spin_unlock_irqrestore(&priv->lock, flags); ++} ++ ++static void configure_pchan(struct sun4i_dma_pchan *pchan, ++ struct sun4i_dma_promise *d) ++{ ++ /* ++ * Configure addresses and misc parameters depending on type ++ * DDMA has an extra field with timing parameters ++ */ ++ if (pchan->is_dedicated) { ++ writel_relaxed(d->src, pchan->base + DDMA_SRC_ADDR_REG); ++ writel_relaxed(d->dst, pchan->base + DDMA_DEST_ADDR_REG); ++ writel_relaxed(d->len, pchan->base + DDMA_BYTE_COUNT_REG); ++ writel_relaxed(d->para, pchan->base + DDMA_PARA_REG); ++ writel_relaxed(d->cfg, pchan->base + DDMA_CFG_REG); ++ } else { ++ writel_relaxed(d->src, pchan->base + NDMA_SRC_ADDR_REG); ++ writel_relaxed(d->dst, pchan->base + NDMA_DEST_ADDR_REG); ++ writel_relaxed(d->len, pchan->base + NDMA_BYTE_COUNT_REG); ++ writel_relaxed(d->cfg, pchan->base + NDMA_CFG_REG); ++ } ++} ++ ++static void set_pchan_interrupt(struct sun4i_dma_dev *priv, ++ struct sun4i_dma_pchan *pchan, ++ int half, int end) ++{ ++ u32 reg; ++ int pchan_number = pchan - priv->pchans; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ++ reg = readl_relaxed(priv->base + DMA_IRQ_ENABLE_REG); ++ ++ if (half) ++ reg |= BIT(pchan_number * 2); ++ else ++ reg &= ~BIT(pchan_number * 2); ++ ++ if (end) ++ reg |= BIT(pchan_number * 2 + 1); ++ else ++ reg &= ~BIT(pchan_number * 2 + 1); ++ ++ writel_relaxed(reg, priv->base + DMA_IRQ_ENABLE_REG); ++ ++ spin_unlock_irqrestore(&priv->lock, flags); ++} ++ ++/** ++ * Execute pending operations on a vchan ++ * ++ * When given a vchan, this function will try to acquire a suitable ++ * pchan and, if successful, will configure it to fulfill a promise ++ * from the next pending contract. ++ * ++ * This function must be called with &vchan->vc.lock held. ++ */ ++static int __execute_vchan_pending(struct sun4i_dma_dev *priv, ++ struct sun4i_dma_vchan *vchan) ++{ ++ struct sun4i_dma_promise *promise = NULL; ++ struct sun4i_dma_contract *contract = NULL; ++ struct sun4i_dma_pchan *pchan; ++ struct virt_dma_desc *vd; ++ int ret; ++ ++ lockdep_assert_held(&vchan->vc.lock); ++ ++ /* We need a pchan to do anything, so secure one if available */ ++ pchan = find_and_use_pchan(priv, vchan); ++ if (!pchan) ++ return -EBUSY; ++ ++ /* ++ * Channel endpoints must not be repeated, so if this vchan ++ * has already submitted some work, we can't do anything else ++ */ ++ if (vchan->processing) { ++ dev_dbg(chan2dev(&vchan->vc.chan), ++ "processing something to this endpoint already\n"); ++ ret = -EBUSY; ++ goto release_pchan; ++ } ++ ++ do { ++ /* Figure out which contract we're working with today */ ++ vd = vchan_next_desc(&vchan->vc); ++ if (!vd) { ++ dev_dbg(chan2dev(&vchan->vc.chan), ++ "No pending contract found"); ++ ret = 0; ++ goto release_pchan; ++ } ++ ++ contract = to_sun4i_dma_contract(vd); ++ if (list_empty(&contract->demands)) { ++ /* The contract has been completed so mark it as such */ ++ list_del(&contract->vd.node); ++ vchan_cookie_complete(&contract->vd); ++ dev_dbg(chan2dev(&vchan->vc.chan), ++ "Empty contract found and marked complete"); ++ } ++ } while (list_empty(&contract->demands)); ++ ++ /* Now find out what we need to do */ ++ promise = list_first_entry(&contract->demands, ++ struct sun4i_dma_promise, list); ++ vchan->processing = promise; ++ ++ /* ... and make it reality */ ++ if (promise) { ++ vchan->contract = contract; ++ vchan->pchan = pchan; ++ set_pchan_interrupt(priv, pchan, contract->is_cyclic, 1); ++ configure_pchan(pchan, promise); ++ } ++ ++ return 0; ++ ++release_pchan: ++ release_pchan(priv, pchan); ++ return ret; ++} ++ ++/** ++ * Generate a promise, to be used in a normal DMA contract. ++ * ++ * A NDMA promise contains all the information required to program the ++ * normal part of the DMA Engine and get data copied. A non-executed ++ * promise will live in the demands list on a contract. Once it has been ++ * completed, it will be moved to the completed demands list for later freeing. ++ * All linked promises will be freed when the corresponding contract is freed ++ */ ++static struct sun4i_dma_promise * ++generate_ndma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, ++ size_t len, struct dma_slave_config *sconfig) ++{ ++ struct sun4i_dma_promise *promise; ++ int ret; ++ ++ promise = kzalloc(sizeof(*promise), GFP_NOWAIT); ++ if (!promise) ++ return NULL; ++ ++ promise->src = src; ++ promise->dst = dest; ++ promise->len = len; ++ promise->cfg = NDMA_CFG_LOADING | NDMA_CFG_BYTE_COUNT_MODE_REMAIN; ++ ++ /* Use sensible default values if client is using undefined ones */ ++ if (sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) ++ sconfig->src_addr_width = sconfig->dst_addr_width; ++ if (sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) ++ sconfig->dst_addr_width = sconfig->src_addr_width; ++ if (sconfig->src_maxburst == 0) ++ sconfig->src_maxburst = sconfig->dst_maxburst; ++ if (sconfig->dst_maxburst == 0) ++ sconfig->dst_maxburst = sconfig->src_maxburst; ++ ++ dev_dbg(chan2dev(chan), ++ "src burst %d, dst burst %d, src buswidth %d, dst buswidth %d", ++ sconfig->src_maxburst, sconfig->dst_maxburst, ++ sconfig->src_addr_width, sconfig->dst_addr_width); ++ ++ /* Source burst */ ++ ret = convert_burst(sconfig->src_maxburst); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= NDMA_CFG_SRC_BURST_LENGTH(ret); ++ ++ /* Destination burst */ ++ ret = convert_burst(sconfig->dst_maxburst); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= NDMA_CFG_DEST_BURST_LENGTH(ret); ++ ++ /* Source bus width */ ++ ret = convert_buswidth(sconfig->src_addr_width); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= NDMA_CFG_SRC_DATA_WIDTH(ret); ++ ++ /* Destination bus width */ ++ ret = convert_buswidth(sconfig->dst_addr_width); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= NDMA_CFG_DEST_DATA_WIDTH(ret); ++ ++ return promise; ++ ++fail: ++ kfree(promise); ++ return NULL; ++} ++ ++/** ++ * Generate a promise, to be used in a dedicated DMA contract. ++ * ++ * A DDMA promise contains all the information required to program the ++ * Dedicated part of the DMA Engine and get data copied. A non-executed ++ * promise will live in the demands list on a contract. Once it has been ++ * completed, it will be moved to the completed demands list for later freeing. ++ * All linked promises will be freed when the corresponding contract is freed ++ */ ++static struct sun4i_dma_promise * ++generate_ddma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, ++ size_t len, struct dma_slave_config *sconfig) ++{ ++ struct sun4i_dma_promise *promise; ++ int ret; ++ ++ promise = kzalloc(sizeof(*promise), GFP_NOWAIT); ++ if (!promise) ++ return NULL; ++ ++ promise->src = src; ++ promise->dst = dest; ++ promise->len = len; ++ promise->cfg = DDMA_CFG_LOADING | DDMA_CFG_BYTE_COUNT_MODE_REMAIN; ++ ++ /* Source burst */ ++ ret = convert_burst(sconfig->src_maxburst); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= DDMA_CFG_SRC_BURST_LENGTH(ret); ++ ++ /* Destination burst */ ++ ret = convert_burst(sconfig->dst_maxburst); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= DDMA_CFG_DEST_BURST_LENGTH(ret); ++ ++ /* Source bus width */ ++ ret = convert_buswidth(sconfig->src_addr_width); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= DDMA_CFG_SRC_DATA_WIDTH(ret); ++ ++ /* Destination bus width */ ++ ret = convert_buswidth(sconfig->dst_addr_width); ++ if (IS_ERR_VALUE(ret)) ++ goto fail; ++ promise->cfg |= DDMA_CFG_DEST_DATA_WIDTH(ret); ++ ++ return promise; ++ ++fail: ++ kfree(promise); ++ return NULL; ++} ++ ++/** ++ * Generate a contract ++ * ++ * Contracts function as DMA descriptors. As our hardware does not support ++ * linked lists, we need to implement SG via software. We use a contract ++ * to hold all the pieces of the request and process them serially one ++ * after another. Each piece is represented as a promise. ++ */ ++static struct sun4i_dma_contract *generate_dma_contract(void) ++{ ++ struct sun4i_dma_contract *contract; ++ ++ contract = kzalloc(sizeof(*contract), GFP_NOWAIT); ++ if (!contract) ++ return NULL; ++ ++ INIT_LIST_HEAD(&contract->demands); ++ INIT_LIST_HEAD(&contract->completed_demands); ++ ++ return contract; ++} ++ ++/** ++ * Get next promise on a cyclic transfer ++ * ++ * Cyclic contracts contain a series of promises which are executed on a ++ * loop. This function returns the next promise from a cyclic contract, ++ * so it can be programmed into the hardware. ++ */ ++static struct sun4i_dma_promise * ++get_next_cyclic_promise(struct sun4i_dma_contract *contract) ++{ ++ struct sun4i_dma_promise *promise; ++ ++ promise = list_first_entry_or_null(&contract->demands, ++ struct sun4i_dma_promise, list); ++ if (!promise) { ++ list_splice_init(&contract->completed_demands, ++ &contract->demands); ++ promise = list_first_entry(&contract->demands, ++ struct sun4i_dma_promise, list); ++ } ++ ++ return promise; ++} ++ ++/** ++ * Free a contract and all its associated promises ++ */ ++static void sun4i_dma_free_contract(struct virt_dma_desc *vd) ++{ ++ struct sun4i_dma_contract *contract = to_sun4i_dma_contract(vd); ++ struct sun4i_dma_promise *promise; ++ ++ /* Free all the demands and completed demands */ ++ list_for_each_entry(promise, &contract->demands, list) ++ kfree(promise); ++ ++ list_for_each_entry(promise, &contract->completed_demands, list) ++ kfree(promise); ++ ++ kfree(contract); ++} ++ ++static struct dma_async_tx_descriptor * ++sun4i_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, ++ dma_addr_t src, size_t len, unsigned long flags) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ struct dma_slave_config *sconfig = &vchan->cfg; ++ struct sun4i_dma_promise *promise; ++ struct sun4i_dma_contract *contract; ++ ++ contract = generate_dma_contract(); ++ if (!contract) ++ return NULL; ++ ++ /* ++ * We can only do the copy to bus aligned addresses, so ++ * choose the best one so we get decent performance. We also ++ * maximize the burst size for this same reason. ++ */ ++ sconfig->src_addr_width = choose_optimal_buswidth(src); ++ sconfig->dst_addr_width = choose_optimal_buswidth(dest); ++ sconfig->src_maxburst = 8; ++ sconfig->dst_maxburst = 8; ++ ++ if (vchan->is_dedicated) ++ promise = generate_ddma_promise(chan, src, dest, len, sconfig); ++ else ++ promise = generate_ndma_promise(chan, src, dest, len, sconfig); ++ ++ if (!promise) { ++ kfree(contract); ++ return NULL; ++ } ++ ++ /* Configure memcpy mode */ ++ if (vchan->is_dedicated) { ++ promise->cfg |= DDMA_CFG_SRC_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | ++ DDMA_CFG_DEST_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM); ++ } else { ++ promise->cfg |= NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | ++ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); ++ } ++ ++ /* Fill the contract with our only promise */ ++ list_add_tail(&promise->list, &contract->demands); ++ ++ /* And add it to the vchan */ ++ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); ++} ++ ++static struct dma_async_tx_descriptor * ++sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len, ++ size_t period_len, enum dma_transfer_direction dir, ++ unsigned long flags) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ struct dma_slave_config *sconfig = &vchan->cfg; ++ struct sun4i_dma_promise *promise; ++ struct sun4i_dma_contract *contract; ++ dma_addr_t src, dest; ++ u32 endpoints; ++ int nr_periods, offset, plength, i; ++ ++ if (!is_slave_direction(dir)) { ++ dev_err(chan2dev(chan), "Invalid DMA direction\n"); ++ return NULL; ++ } ++ ++ if (vchan->is_dedicated) { ++ /* ++ * As we are using this just for audio data, we need to use ++ * normal DMA. There is nothing stopping us from supporting ++ * dedicated DMA here as well, so if a client comes up and ++ * requires it, it will be simple to implement it. ++ */ ++ dev_err(chan2dev(chan), ++ "Cyclic transfers are only supported on Normal DMA\n"); ++ return NULL; ++ } ++ ++ contract = generate_dma_contract(); ++ if (!contract) ++ return NULL; ++ ++ contract->is_cyclic = 1; ++ ++ /* Figure out the endpoints and the address we need */ ++ if (dir == DMA_MEM_TO_DEV) { ++ src = buf; ++ dest = sconfig->dst_addr; ++ endpoints = NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | ++ NDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | ++ NDMA_CFG_DEST_FIXED_ADDR; ++ } else { ++ src = sconfig->src_addr; ++ dest = buf; ++ endpoints = NDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | ++ NDMA_CFG_SRC_FIXED_ADDR | ++ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); ++ } ++ ++ /* ++ * We will be using half done interrupts to make two periods ++ * out of a promise, so we need to program the DMA engine less ++ * often ++ */ ++ nr_periods = DIV_ROUND_UP(len / period_len, 2); ++ for (i = 0; i < nr_periods; i++) { ++ /* Calculate the offset in the buffer and the length needed */ ++ offset = i * period_len * 2; ++ plength = min((len - offset), (period_len * 2)); ++ if (dir == DMA_MEM_TO_DEV) ++ src = buf + offset; ++ else ++ dest = buf + offset; ++ ++ /* Make the promise */ ++ promise = generate_ndma_promise(chan, src, dest, ++ plength, sconfig); ++ if (!promise) { ++ /* TODO: should we free everything? */ ++ return NULL; ++ } ++ promise->cfg |= endpoints; ++ ++ /* Then add it to the contract */ ++ list_add_tail(&promise->list, &contract->demands); ++ } ++ ++ /* And add it to the vchan */ ++ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); ++} ++ ++static struct dma_async_tx_descriptor * ++sun4i_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, ++ unsigned int sg_len, enum dma_transfer_direction dir, ++ unsigned long flags, void *context) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ struct dma_slave_config *sconfig = &vchan->cfg; ++ struct sun4i_dma_promise *promise; ++ struct sun4i_dma_contract *contract; ++ struct scatterlist *sg; ++ dma_addr_t srcaddr, dstaddr; ++ u32 endpoints, para; ++ int i; ++ ++ if (!sgl) ++ return NULL; ++ ++ if (!is_slave_direction(dir)) { ++ dev_err(chan2dev(chan), "Invalid DMA direction\n"); ++ return NULL; ++ } ++ ++ contract = generate_dma_contract(); ++ if (!contract) ++ return NULL; ++ ++ /* Figure out endpoints */ ++ if (vchan->is_dedicated && dir == DMA_MEM_TO_DEV) { ++ endpoints = DDMA_CFG_SRC_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | ++ DDMA_CFG_SRC_ADDR_MODE(DDMA_ADDR_MODE_LINEAR) | ++ DDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | ++ DDMA_CFG_DEST_ADDR_MODE(DDMA_ADDR_MODE_IO); ++ } else if (!vchan->is_dedicated && dir == DMA_MEM_TO_DEV) { ++ endpoints = NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | ++ NDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | ++ NDMA_CFG_DEST_FIXED_ADDR; ++ } else if (vchan->is_dedicated) { ++ endpoints = DDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | ++ DDMA_CFG_SRC_ADDR_MODE(DDMA_ADDR_MODE_IO) | ++ DDMA_CFG_DEST_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | ++ DDMA_CFG_DEST_ADDR_MODE(DDMA_ADDR_MODE_LINEAR); ++ } else { ++ endpoints = NDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | ++ NDMA_CFG_SRC_FIXED_ADDR | ++ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); ++ } ++ ++ for_each_sg(sgl, sg, sg_len, i) { ++ /* Figure out addresses */ ++ if (dir == DMA_MEM_TO_DEV) { ++ srcaddr = sg_dma_address(sg); ++ dstaddr = sconfig->dst_addr; ++ } else { ++ srcaddr = sconfig->src_addr; ++ dstaddr = sg_dma_address(sg); ++ } ++ ++ /* ++ * These are the magic DMA engine timings that keep SPI going. ++ * I haven't seen any interface on DMAEngine to configure ++ * timings, and so far they seem to work for everything we ++ * support, so I've kept them here. I don't know if other ++ * devices need different timings because, as usual, we only ++ * have the "para" bitfield meanings, but no comment on what ++ * the values should be when doing a certain operation :| ++ */ ++ para = DDMA_MAGIC_SPI_PARAMETERS; ++ ++ /* And make a suitable promise */ ++ if (vchan->is_dedicated) ++ promise = generate_ddma_promise(chan, srcaddr, dstaddr, ++ sg_dma_len(sg), sconfig); ++ else ++ promise = generate_ndma_promise(chan, srcaddr, dstaddr, ++ sg_dma_len(sg), sconfig); ++ ++ if (!promise) ++ return NULL; /* TODO: should we free everything? */ ++ ++ promise->cfg |= endpoints; ++ promise->para = para; ++ ++ /* Then add it to the contract */ ++ list_add_tail(&promise->list, &contract->demands); ++ } ++ ++ /* ++ * Once we've got all the promises ready, add the contract ++ * to the pending list on the vchan ++ */ ++ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); ++} ++ ++static int sun4i_dma_terminate_all(struct dma_chan *chan) ++{ ++ struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ struct sun4i_dma_pchan *pchan = vchan->pchan; ++ LIST_HEAD(head); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&vchan->vc.lock, flags); ++ vchan_get_all_descriptors(&vchan->vc, &head); ++ spin_unlock_irqrestore(&vchan->vc.lock, flags); ++ ++ /* ++ * Clearing the configuration register will halt the pchan. Interrupts ++ * may still trigger, so don't forget to disable them. ++ */ ++ if (pchan) { ++ if (pchan->is_dedicated) ++ writel(0, pchan->base + DDMA_CFG_REG); ++ else ++ writel(0, pchan->base + NDMA_CFG_REG); ++ set_pchan_interrupt(priv, pchan, 0, 0); ++ release_pchan(priv, pchan); ++ } ++ ++ spin_lock_irqsave(&vchan->vc.lock, flags); ++ vchan_dma_desc_free_list(&vchan->vc, &head); ++ /* Clear these so the vchan is usable again */ ++ vchan->processing = NULL; ++ vchan->pchan = NULL; ++ spin_unlock_irqrestore(&vchan->vc.lock, flags); ++ ++ return 0; ++} ++ ++static int sun4i_dma_config(struct dma_chan *chan, ++ struct dma_slave_config *config) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ ++ memcpy(&vchan->cfg, config, sizeof(*config)); ++ ++ return 0; ++} ++ ++static struct dma_chan *sun4i_dma_of_xlate(struct of_phandle_args *dma_spec, ++ struct of_dma *ofdma) ++{ ++ struct sun4i_dma_dev *priv = ofdma->of_dma_data; ++ struct sun4i_dma_vchan *vchan; ++ struct dma_chan *chan; ++ u8 is_dedicated = dma_spec->args[0]; ++ u8 endpoint = dma_spec->args[1]; ++ ++ /* Check if type is Normal or Dedicated */ ++ if (is_dedicated != 0 && is_dedicated != 1) ++ return NULL; ++ ++ /* Make sure the endpoint looks sane */ ++ if ((is_dedicated && endpoint >= DDMA_DRQ_TYPE_LIMIT) || ++ (!is_dedicated && endpoint >= NDMA_DRQ_TYPE_LIMIT)) ++ return NULL; ++ ++ chan = dma_get_any_slave_channel(&priv->slave); ++ if (!chan) ++ return NULL; ++ ++ /* Assign the endpoint to the vchan */ ++ vchan = to_sun4i_dma_vchan(chan); ++ vchan->is_dedicated = is_dedicated; ++ vchan->endpoint = endpoint; ++ ++ return chan; ++} ++ ++static enum dma_status sun4i_dma_tx_status(struct dma_chan *chan, ++ dma_cookie_t cookie, ++ struct dma_tx_state *state) ++{ ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ struct sun4i_dma_pchan *pchan = vchan->pchan; ++ struct sun4i_dma_contract *contract; ++ struct sun4i_dma_promise *promise; ++ struct virt_dma_desc *vd; ++ unsigned long flags; ++ enum dma_status ret; ++ size_t bytes = 0; ++ ++ ret = dma_cookie_status(chan, cookie, state); ++ if (ret == DMA_COMPLETE) ++ return ret; ++ ++ spin_lock_irqsave(&vchan->vc.lock, flags); ++ vd = vchan_find_desc(&vchan->vc, cookie); ++ if (!vd) ++ goto exit; ++ contract = to_sun4i_dma_contract(vd); ++ ++ list_for_each_entry(promise, &contract->demands, list) ++ bytes += promise->len; ++ ++ /* ++ * The hardware is configured to return the remaining byte ++ * quantity. If possible, replace the first listed element's ++ * full size with the actual remaining amount ++ */ ++ promise = list_first_entry_or_null(&contract->demands, ++ struct sun4i_dma_promise, list); ++ if (promise && pchan) { ++ bytes -= promise->len; ++ if (pchan->is_dedicated) ++ bytes += readl(pchan->base + DDMA_BYTE_COUNT_REG); ++ else ++ bytes += readl(pchan->base + NDMA_BYTE_COUNT_REG); ++ } ++ ++exit: ++ ++ dma_set_residue(state, bytes); ++ spin_unlock_irqrestore(&vchan->vc.lock, flags); ++ ++ return ret; ++} ++ ++static void sun4i_dma_issue_pending(struct dma_chan *chan) ++{ ++ struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); ++ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&vchan->vc.lock, flags); ++ ++ /* ++ * If there are pending transactions for this vchan, push one of ++ * them into the engine to get the ball rolling. ++ */ ++ if (vchan_issue_pending(&vchan->vc)) ++ __execute_vchan_pending(priv, vchan); ++ ++ spin_unlock_irqrestore(&vchan->vc.lock, flags); ++} ++ ++static irqreturn_t sun4i_dma_interrupt(int irq, void *dev_id) ++{ ++ struct sun4i_dma_dev *priv = dev_id; ++ struct sun4i_dma_pchan *pchans = priv->pchans, *pchan; ++ struct sun4i_dma_vchan *vchan; ++ struct sun4i_dma_contract *contract; ++ struct sun4i_dma_promise *promise; ++ unsigned long pendirq, irqs, disableirqs; ++ int bit, i, free_room, allow_mitigation = 1; ++ ++ pendirq = readl_relaxed(priv->base + DMA_IRQ_PENDING_STATUS_REG); ++ ++handle_pending: ++ ++ disableirqs = 0; ++ free_room = 0; ++ ++ for_each_set_bit(bit, &pendirq, 32) { ++ pchan = &pchans[bit >> 1]; ++ vchan = pchan->vchan; ++ if (!vchan) /* a terminated channel may still interrupt */ ++ continue; ++ contract = vchan->contract; ++ ++ /* ++ * Disable the IRQ and free the pchan if it's an end ++ * interrupt (odd bit) ++ */ ++ if (bit & 1) { ++ spin_lock(&vchan->vc.lock); ++ ++ /* ++ * Move the promise into the completed list now that ++ * we're done with it ++ */ ++ list_del(&vchan->processing->list); ++ list_add_tail(&vchan->processing->list, ++ &contract->completed_demands); ++ ++ /* ++ * Cyclic DMA transfers are special: ++ * - There's always something we can dispatch ++ * - We need to run the callback ++ * - Latency is very important, as this is used by audio ++ * We therefore just cycle through the list and dispatch ++ * whatever we have here, reusing the pchan. There's ++ * no need to run the thread after this. ++ * ++ * For non-cyclic transfers we need to look around, ++ * so we can program some more work, or notify the ++ * client that their transfers have been completed. ++ */ ++ if (contract->is_cyclic) { ++ promise = get_next_cyclic_promise(contract); ++ vchan->processing = promise; ++ configure_pchan(pchan, promise); ++ vchan_cyclic_callback(&contract->vd); ++ } else { ++ vchan->processing = NULL; ++ vchan->pchan = NULL; ++ ++ free_room = 1; ++ disableirqs |= BIT(bit); ++ release_pchan(priv, pchan); ++ } ++ ++ spin_unlock(&vchan->vc.lock); ++ } else { ++ /* Half done interrupt */ ++ if (contract->is_cyclic) ++ vchan_cyclic_callback(&contract->vd); ++ else ++ disableirqs |= BIT(bit); ++ } ++ } ++ ++ /* Disable the IRQs for events we handled */ ++ spin_lock(&priv->lock); ++ irqs = readl_relaxed(priv->base + DMA_IRQ_ENABLE_REG); ++ writel_relaxed(irqs & ~disableirqs, priv->base + DMA_IRQ_ENABLE_REG); ++ spin_unlock(&priv->lock); ++ ++ /* Writing 1 to the pending field will clear the pending interrupt */ ++ writel_relaxed(pendirq, priv->base + DMA_IRQ_PENDING_STATUS_REG); ++ ++ /* ++ * If a pchan was freed, we may be able to schedule something else, ++ * so have a look around ++ */ ++ if (free_room) { ++ for (i = 0; i < DMA_NR_MAX_VCHANS; i++) { ++ vchan = &priv->vchans[i]; ++ spin_lock(&vchan->vc.lock); ++ __execute_vchan_pending(priv, vchan); ++ spin_unlock(&vchan->vc.lock); ++ } ++ } ++ ++ /* ++ * Handle newer interrupts if some showed up, but only do it once ++ * to avoid a too long a loop ++ */ ++ if (allow_mitigation) { ++ pendirq = readl_relaxed(priv->base + DMA_IRQ_PENDING_STATUS_REG); ++ if (pendirq) { ++ allow_mitigation = 0; ++ goto handle_pending; ++ } ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int sun4i_dma_probe(struct platform_device *pdev) ++{ ++ struct sun4i_dma_dev *priv; ++ struct resource *res; ++ int i, j, ret; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ priv->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->base)) ++ return PTR_ERR(priv->base); ++ ++ priv->irq = platform_get_irq(pdev, 0); ++ if (priv->irq < 0) { ++ dev_err(&pdev->dev, "Cannot claim IRQ\n"); ++ return priv->irq; ++ } ++ ++ priv->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk)) { ++ dev_err(&pdev->dev, "No clock specified\n"); ++ return PTR_ERR(priv->clk); ++ } ++ ++ platform_set_drvdata(pdev, priv); ++ spin_lock_init(&priv->lock); ++ ++ dma_cap_zero(priv->slave.cap_mask); ++ dma_cap_set(DMA_PRIVATE, priv->slave.cap_mask); ++ dma_cap_set(DMA_MEMCPY, priv->slave.cap_mask); ++ dma_cap_set(DMA_CYCLIC, priv->slave.cap_mask); ++ dma_cap_set(DMA_SLAVE, priv->slave.cap_mask); ++ ++ INIT_LIST_HEAD(&priv->slave.channels); ++ priv->slave.device_free_chan_resources = sun4i_dma_free_chan_resources; ++ priv->slave.device_tx_status = sun4i_dma_tx_status; ++ priv->slave.device_issue_pending = sun4i_dma_issue_pending; ++ priv->slave.device_prep_slave_sg = sun4i_dma_prep_slave_sg; ++ priv->slave.device_prep_dma_memcpy = sun4i_dma_prep_dma_memcpy; ++ priv->slave.device_prep_dma_cyclic = sun4i_dma_prep_dma_cyclic; ++ priv->slave.device_config = sun4i_dma_config; ++ priv->slave.device_terminate_all = sun4i_dma_terminate_all; ++ priv->slave.copy_align = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ priv->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | ++ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | ++ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); ++ priv->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | ++ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | ++ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); ++ priv->slave.directions = BIT(DMA_DEV_TO_MEM) | ++ BIT(DMA_MEM_TO_DEV); ++ priv->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; ++ ++ priv->slave.dev = &pdev->dev; ++ ++ priv->pchans = devm_kcalloc(&pdev->dev, DMA_NR_MAX_CHANNELS, ++ sizeof(struct sun4i_dma_pchan), GFP_KERNEL); ++ priv->vchans = devm_kcalloc(&pdev->dev, DMA_NR_MAX_VCHANS, ++ sizeof(struct sun4i_dma_vchan), GFP_KERNEL); ++ if (!priv->vchans || !priv->pchans) ++ return -ENOMEM; ++ ++ /* ++ * [0..NDMA_NR_MAX_CHANNELS) are normal pchans, and ++ * [NDMA_NR_MAX_CHANNELS..DMA_NR_MAX_CHANNELS) are dedicated ones ++ */ ++ for (i = 0; i < NDMA_NR_MAX_CHANNELS; i++) ++ priv->pchans[i].base = priv->base + NDMA_CHANNEL_REG_BASE(i); ++ ++ for (j = 0; i < DMA_NR_MAX_CHANNELS; i++, j++) { ++ priv->pchans[i].base = priv->base + DDMA_CHANNEL_REG_BASE(j); ++ priv->pchans[i].is_dedicated = 1; ++ } ++ ++ for (i = 0; i < DMA_NR_MAX_VCHANS; i++) { ++ struct sun4i_dma_vchan *vchan = &priv->vchans[i]; ++ ++ spin_lock_init(&vchan->vc.lock); ++ vchan->vc.desc_free = sun4i_dma_free_contract; ++ vchan_init(&vchan->vc, &priv->slave); ++ } ++ ++ ret = clk_prepare_enable(priv->clk); ++ if (ret) { ++ dev_err(&pdev->dev, "Couldn't enable the clock\n"); ++ return ret; ++ } ++ ++ /* ++ * Make sure the IRQs are all disabled and accounted for. The bootloader ++ * likes to leave these dirty ++ */ ++ writel(0, priv->base + DMA_IRQ_ENABLE_REG); ++ writel(0xFFFFFFFF, priv->base + DMA_IRQ_PENDING_STATUS_REG); ++ ++ ret = devm_request_irq(&pdev->dev, priv->irq, sun4i_dma_interrupt, ++ 0, dev_name(&pdev->dev), priv); ++ if (ret) { ++ dev_err(&pdev->dev, "Cannot request IRQ\n"); ++ goto err_clk_disable; ++ } ++ ++ ret = dma_async_device_register(&priv->slave); ++ if (ret) { ++ dev_warn(&pdev->dev, "Failed to register DMA engine device\n"); ++ goto err_clk_disable; ++ } ++ ++ ret = of_dma_controller_register(pdev->dev.of_node, sun4i_dma_of_xlate, ++ priv); ++ if (ret) { ++ dev_err(&pdev->dev, "of_dma_controller_register failed\n"); ++ goto err_dma_unregister; ++ } ++ ++ dev_dbg(&pdev->dev, "Successfully probed SUN4I_DMA\n"); ++ ++ return 0; ++ ++err_dma_unregister: ++ dma_async_device_unregister(&priv->slave); ++err_clk_disable: ++ clk_disable_unprepare(priv->clk); ++ return ret; ++} ++ ++static int sun4i_dma_remove(struct platform_device *pdev) ++{ ++ struct sun4i_dma_dev *priv = platform_get_drvdata(pdev); ++ ++ /* Disable IRQ so no more work is scheduled */ ++ disable_irq(priv->irq); ++ ++ of_dma_controller_free(pdev->dev.of_node); ++ dma_async_device_unregister(&priv->slave); ++ ++ clk_disable_unprepare(priv->clk); ++ ++ return 0; ++} ++ ++static struct of_device_id sun4i_dma_match[] = { ++ { .compatible = "allwinner,sun4i-a10-dma" }, ++ { /* sentinel */ }, ++}; ++ ++static struct platform_driver sun4i_dma_driver = { ++ .probe = sun4i_dma_probe, ++ .remove = sun4i_dma_remove, ++ .driver = { ++ .name = "sun4i-dma", ++ .of_match_table = sun4i_dma_match, ++ }, ++}; ++ ++module_platform_driver(sun4i_dma_driver); ++ ++MODULE_DESCRIPTION("Allwinner A10 Dedicated DMA Controller Driver"); ++MODULE_AUTHOR("Emilio López <emilio@elopez.com.ar>"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch b/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch new file mode 100644 index 0000000000..150be4192e --- /dev/null +++ b/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch @@ -0,0 +1,287 @@ +From ea6871c5b3a934d0bfe08082e95c3b952f93ef39 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:48:35 -0300 +Subject: [PATCH] clk: sunxi: PLL2 support for sun4i, sun5i and sun7i +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds support for PLL2 and derivates on A10 revision B and +higher, as well as on sun5i and sun7i SoCs. As this PLL is only used for +audio and requires good accuracy, we only support two known good rates. + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/clk/sunxi/Makefile | 1 + + drivers/clk/sunxi/clk-a10-pll2.c | 249 +++++++++++++++++++++++++++++++++++++++ + 2 files changed, 250 insertions(+) + create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c + +diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile +index 058f273..eb36c38 100644 +--- a/drivers/clk/sunxi/Makefile ++++ b/drivers/clk/sunxi/Makefile +@@ -4,6 +4,7 @@ + + obj-y += clk-sunxi.o clk-factors.o + obj-y += clk-a10-hosc.o ++obj-y += clk-a10-pll2.o + obj-y += clk-a20-gmac.o + obj-y += clk-mod0.o + obj-y += clk-sun8i-mbus.o +diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c +new file mode 100644 +index 0000000..bdbf1e9 +--- /dev/null ++++ b/drivers/clk/sunxi/clk-a10-pll2.c +@@ -0,0 +1,249 @@ ++/* ++ * Copyright 2013 Emilio López ++ * ++ * Emilio López <emilio@elopez.com.ar> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk-provider.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++#include <linux/slab.h> ++ ++#define SUN4I_PLL2_ENABLE 31 ++#define SUN4I_PLL2_POST_DIV 26 ++#define SUN4I_PLL2_POST_DIV_MASK 0xF ++#define SUN4I_PLL2_N 8 ++#define SUN4I_PLL2_N_MASK 0x7F ++#define SUN4I_PLL2_PRE_DIV 0 ++#define SUN4I_PLL2_PRE_DIV_MASK 0x1F ++ ++#define SUN4I_PLL2_OUTPUTS 4 ++ ++struct sun4i_pll2_clk { ++ struct clk_hw hw; ++ void __iomem *reg; ++}; ++ ++static inline struct sun4i_pll2_clk *to_sun4i_pll2_clk(struct clk_hw *hw) ++{ ++ return container_of(hw, struct sun4i_pll2_clk, hw); ++} ++ ++static unsigned long sun4i_pll2_1x_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); ++ int n, prediv, postdiv; ++ ++ u32 val = readl(clk->reg); ++ n = (val >> SUN4I_PLL2_N) & SUN4I_PLL2_N_MASK; ++ prediv = (val >> SUN4I_PLL2_PRE_DIV) & SUN4I_PLL2_PRE_DIV_MASK; ++ postdiv = (val >> SUN4I_PLL2_POST_DIV) & SUN4I_PLL2_POST_DIV_MASK; ++ ++ /* 0 is a special case and means 1 */ ++ if (n == 0) ++ n = 1; ++ if (prediv == 0) ++ prediv = 1; ++ if (postdiv == 0) ++ postdiv = 1; ++ ++ return ((parent_rate * n) / prediv) / postdiv; ++} ++ ++static unsigned long sun4i_pll2_8x_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); ++ int n, prediv; ++ ++ u32 val = readl(clk->reg); ++ n = (val >> SUN4I_PLL2_N) & SUN4I_PLL2_N_MASK; ++ prediv = (val >> SUN4I_PLL2_PRE_DIV) & SUN4I_PLL2_PRE_DIV_MASK; ++ ++ /* 0 is a special case and means 1 */ ++ if (n == 0) ++ n = 1; ++ if (prediv == 0) ++ prediv = 1; ++ ++ return ((parent_rate * 2 * n) / prediv); ++} ++ ++static unsigned long sun4i_pll2_4x_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ return sun4i_pll2_8x_recalc_rate(hw, parent_rate / 2); ++} ++ ++static unsigned long sun4i_pll2_2x_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ return sun4i_pll2_8x_recalc_rate(hw, parent_rate / 4); ++} ++ ++static long sun4i_pll2_1x_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* ++ * There is only two interesting rates for the audio PLL, the ++ * rest isn't really usable due to accuracy concerns. Therefore, ++ * we specifically round to those rates here ++ */ ++ if (rate < 22579200) ++ return -EINVAL; ++ ++ if (rate >= 22579200 && rate < 24576000) ++ return 22579200; ++ ++ return 24576000; ++} ++ ++static long sun4i_pll2_8x_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* ++ * We should account for the postdiv that we're undoing on PLL2x8, ++ * which is always 4 in the usable configurations. The division ++ * by two is done because PLL2x8 also doubles the rate ++ */ ++ *parent_rate = (rate * 4) / 2; ++ ++ return rate; ++} ++ ++static long sun4i_pll2_4x_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* PLL2x4 * 2 = PLL2x8 */ ++ return sun4i_pll2_8x_round_rate(hw, rate * 2, parent_rate); ++} ++ ++static long sun4i_pll2_2x_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* PLL2x2 * 4 = PLL2x8 */ ++ return sun4i_pll2_8x_round_rate(hw, rate * 4, parent_rate); ++} ++ ++static int sun4i_pll2_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); ++ u32 val = readl(clk->reg); ++ ++ val &= ~(SUN4I_PLL2_N_MASK << SUN4I_PLL2_N); ++ val &= ~(SUN4I_PLL2_PRE_DIV_MASK << SUN4I_PLL2_PRE_DIV); ++ val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV); ++ ++ val |= (21 << SUN4I_PLL2_PRE_DIV) | (4 << SUN4I_PLL2_POST_DIV); ++ ++ if (rate == 22579200) ++ val |= (79 << SUN4I_PLL2_N); ++ else if (rate == 24576000) ++ val |= (86 << SUN4I_PLL2_N); ++ else ++ return -EINVAL; ++ ++ writel(val, clk->reg); ++ ++ return 0; ++} ++ ++static struct clk_ops sun4i_pll2_ops_1x = { ++ .recalc_rate = sun4i_pll2_1x_recalc_rate, ++ .round_rate = sun4i_pll2_1x_round_rate, ++ .set_rate = sun4i_pll2_set_rate, ++}; ++ ++static struct clk_ops sun4i_pll2_ops_2x = { ++ .recalc_rate = sun4i_pll2_2x_recalc_rate, ++ .round_rate = sun4i_pll2_2x_round_rate, ++}; ++ ++static struct clk_ops sun4i_pll2_ops_4x = { ++ .recalc_rate = sun4i_pll2_4x_recalc_rate, ++ .round_rate = sun4i_pll2_4x_round_rate, ++}; ++ ++static struct clk_ops sun4i_pll2_ops_8x = { ++ .recalc_rate = sun4i_pll2_8x_recalc_rate, ++ .round_rate = sun4i_pll2_8x_round_rate, ++}; ++ ++static void __init sun4i_pll2_setup(struct device_node *np) ++{ ++ const char *clk_name = np->name, *parent; ++ struct clk_onecell_data *clk_data; ++ struct sun4i_pll2_clk *pll2; ++ struct clk_gate *gate; ++ struct clk **clks; ++ void __iomem *reg; ++ ++ pll2 = kzalloc(sizeof(*pll2), GFP_KERNEL); ++ gate = kzalloc(sizeof(*gate), GFP_KERNEL); ++ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); ++ clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL); ++ if (!pll2 || !gate || !clk_data || !clks) ++ goto free_mem; ++ ++ reg = of_iomap(np, 0); ++ parent = of_clk_get_parent_name(np, 0); ++ of_property_read_string_index(np, "clock-output-names", 0, &clk_name); ++ ++ pll2->reg = reg; ++ gate->reg = reg; ++ gate->bit_idx = SUN4I_PLL2_ENABLE; ++ ++ /* PLL2, also known as PLL2x1 */ ++ of_property_read_string_index(np, "clock-output-names", 0, &clk_name); ++ clks[0] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, ++ &pll2->hw, &sun4i_pll2_ops_1x, ++ &gate->hw, &clk_gate_ops, 0); ++ WARN_ON(IS_ERR(clks[0])); ++ parent = clk_name; ++ ++ /* PLL2x2, 1/4 the rate of PLL2x8 */ ++ of_property_read_string_index(np, "clock-output-names", 1, &clk_name); ++ clks[1] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, ++ &pll2->hw, &sun4i_pll2_ops_2x, ++ NULL, NULL, CLK_SET_RATE_PARENT); ++ WARN_ON(IS_ERR(clks[1])); ++ ++ /* PLL2x4, 1/2 the rate of PLL2x8 */ ++ of_property_read_string_index(np, "clock-output-names", 2, &clk_name); ++ clks[2] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, ++ &pll2->hw, &sun4i_pll2_ops_4x, ++ NULL, NULL, CLK_SET_RATE_PARENT); ++ WARN_ON(IS_ERR(clks[2])); ++ ++ /* PLL2x8, double of PLL2 without the post divisor */ ++ of_property_read_string_index(np, "clock-output-names", 3, &clk_name); ++ clks[3] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, ++ &pll2->hw, &sun4i_pll2_ops_8x, ++ NULL, NULL, CLK_SET_RATE_PARENT); ++ WARN_ON(IS_ERR(clks[3])); ++ ++ clk_data->clks = clks; ++ clk_data->clk_num = SUN4I_PLL2_OUTPUTS; ++ of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); ++ ++ return; ++ ++free_mem: ++ kfree(pll2); ++ kfree(gate); ++ kfree(clk_data); ++ kfree(clks); ++} ++CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-b-pll2-clk", sun4i_pll2_setup); diff --git a/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch b/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch new file mode 100644 index 0000000000..3663610f2a --- /dev/null +++ b/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch @@ -0,0 +1,78 @@ +From 9b95732096c11d84bd0082aed0d575d8c09e3ab6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:49:37 -0300 +Subject: [PATCH] clk: sunxi: codec clock support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The codec clock on sun4i, sun5i and sun7i is a simple gate with PLL2 as +parent. + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/clk/sunxi/Makefile | 1 + + drivers/clk/sunxi/clk-a10-codec.c | 41 +++++++++++++++++++++++++++++++++++++++ + 2 files changed, 42 insertions(+) + create mode 100644 drivers/clk/sunxi/clk-a10-codec.c + +diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile +index eb36c38..6fa845e 100644 +--- a/drivers/clk/sunxi/Makefile ++++ b/drivers/clk/sunxi/Makefile +@@ -3,6 +3,7 @@ + # + + obj-y += clk-sunxi.o clk-factors.o ++obj-y += clk-a10-codec.o + obj-y += clk-a10-hosc.o + obj-y += clk-a10-pll2.o + obj-y += clk-a20-gmac.o +diff --git a/drivers/clk/sunxi/clk-a10-codec.c b/drivers/clk/sunxi/clk-a10-codec.c +new file mode 100644 +index 0000000..c70acbf +--- /dev/null ++++ b/drivers/clk/sunxi/clk-a10-codec.c +@@ -0,0 +1,41 @@ ++/* ++ * Copyright 2013 Emilio López ++ * ++ * Emilio López <emilio@elopez.com.ar> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk-provider.h> ++#include <linux/clkdev.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++ ++#define SUN4I_CODEC_GATE 31 ++ ++static void __init sun4i_codec_clk_setup(struct device_node *node) ++{ ++ struct clk *clk; ++ const char *clk_name = node->name, *parent_name; ++ void __iomem *reg; ++ ++ of_property_read_string(node, "clock-output-names", &clk_name); ++ parent_name = of_clk_get_parent_name(node, 0); ++ reg = of_iomap(node, 0); ++ ++ clk = clk_register_gate(NULL, clk_name, parent_name, ++ CLK_SET_RATE_PARENT, reg, ++ SUN4I_CODEC_GATE, 0, NULL); ++ ++ if (!IS_ERR(clk)) ++ of_clk_add_provider(node, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(sun4i_codec, "allwinner,sun4i-a10-codec-clk", sun4i_codec_clk_setup); diff --git a/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch b/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch new file mode 100644 index 0000000000..87ec3feb2a --- /dev/null +++ b/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch @@ -0,0 +1,107 @@ +From 7fbbca069587b7f467e76f583ad640977de1a4ff Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:28:02 -0300 +Subject: [PATCH] clk: sunxi: mod1 clock support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The module 1 type of clocks consist of a gate and a mux and are used on +the audio blocks to mux and gate the PLL2 outputs for AC97, IIS or +SPDIF. This commit adds support for them on the sunxi clock driver. + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + drivers/clk/sunxi/Makefile | 1 + + drivers/clk/sunxi/clk-a10-mod1.c | 69 ++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 70 insertions(+) + create mode 100644 drivers/clk/sunxi/clk-a10-mod1.c + +diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile +index 6fa845e..960eeab 100644 +--- a/drivers/clk/sunxi/Makefile ++++ b/drivers/clk/sunxi/Makefile +@@ -5,6 +5,7 @@ + obj-y += clk-sunxi.o clk-factors.o + obj-y += clk-a10-codec.o + obj-y += clk-a10-hosc.o ++obj-y += clk-a10-mod1.o + obj-y += clk-a10-pll2.o + obj-y += clk-a20-gmac.o + obj-y += clk-mod0.o +diff --git a/drivers/clk/sunxi/clk-a10-mod1.c b/drivers/clk/sunxi/clk-a10-mod1.c +new file mode 100644 +index 0000000..1357641 +--- /dev/null ++++ b/drivers/clk/sunxi/clk-a10-mod1.c +@@ -0,0 +1,69 @@ ++/* ++ * Copyright 2013 Emilio López ++ * ++ * Emilio López <emilio@elopez.com.ar> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk-provider.h> ++#include <linux/clkdev.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++ ++static DEFINE_SPINLOCK(mod1_lock); ++ ++#define SUN4I_MOD1_ENABLE 31 ++#define SUN4I_MOD1_MUX 16 ++#define SUN4I_MOD1_MUX_WIDTH 2 ++#define SUN4I_MOD1_MAX_PARENTS 4 ++ ++static void __init sun4i_mod1_clk_setup(struct device_node *node) ++{ ++ struct clk *clk; ++ struct clk_mux *mux; ++ struct clk_gate *gate; ++ const char *parents[4]; ++ const char *clk_name = node->name; ++ void __iomem *reg; ++ int i = 0; ++ ++ mux = kzalloc(sizeof(*mux), GFP_KERNEL); ++ gate = kzalloc(sizeof(*gate), GFP_KERNEL); ++ if (!mux || !gate) { ++ kfree(mux); ++ kfree(gate); ++ return; ++ } ++ ++ of_property_read_string(node, "clock-output-names", &clk_name); ++ reg = of_iomap(node, 0); ++ ++ while (i < SUN4I_MOD1_MAX_PARENTS && ++ (parents[i] = of_clk_get_parent_name(node, i)) != NULL) ++ i++; ++ ++ gate->reg = reg; ++ gate->bit_idx = SUN4I_MOD1_ENABLE; ++ gate->lock = &mod1_lock; ++ mux->reg = reg; ++ mux->shift = SUN4I_MOD1_MUX; ++ mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1; ++ mux->lock = &mod1_lock; ++ ++ clk = clk_register_composite(NULL, clk_name, parents, i, ++ &mux->hw, &clk_mux_ops, ++ NULL, NULL, ++ &gate->hw, &clk_gate_ops, 0); ++ if (!IS_ERR(clk)) ++ of_clk_add_provider(node, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk", sun4i_mod1_clk_setup); diff --git a/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch b/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch new file mode 100644 index 0000000000..0d3de3c203 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch @@ -0,0 +1,76 @@ +From 32bb743195e1e48c48fc5cefd7c6ecdce56046a3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:58:44 -0300 +Subject: [PATCH] ARM: sunxi: Add PLL2 support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This commit adds the PLL2 definition to the sun4i, sun5i and sun7i +device trees. PLL2 is used to clock audio devices. + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ + arch/arm/boot/dts/sun5i.dtsi | 8 ++++++++ + arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ + 3 files changed, 24 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index 30f663a..fab13af 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -195,6 +195,14 @@ + clock-output-names = "pll1"; + }; + ++ pll2: clk@01c20008 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun4i-a10-b-pll2-clk"; ++ reg = <0x01c20008 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; ++ }; ++ + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index 53d3ead..a4b6a66 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -102,6 +102,14 @@ + clock-output-names = "pll1"; + }; + ++ pll2: clk@01c20008 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun4i-a10-b-pll2-clk"; ++ reg = <0x01c20008 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; ++ }; ++ + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 7549f1b..12d9ffd 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -199,6 +199,14 @@ + clock-output-names = "pll1"; + }; + ++ pll2: clk@01c20008 { ++ #clock-cells = <1>; ++ compatible = "allwinner,sun4i-a10-b-pll2-clk"; ++ reg = <0x01c20008 0x4>; ++ clocks = <&osc24M>; ++ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; ++ }; ++ + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch b/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch new file mode 100644 index 0000000000..05ddd4babc --- /dev/null +++ b/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch @@ -0,0 +1,76 @@ +From b404f3daca1807a74e07180397c6e85046b7a5cd Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:58:58 -0300 +Subject: [PATCH] ARM: sunxi: Add codec clock support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This commit adds the codec clock definition to the sun4i, sun5i and +sun7i device trees. The codec clock is used in the analog codec block. + +Signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ + arch/arm/boot/dts/sun5i.dtsi | 8 ++++++++ + arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ + 3 files changed, 24 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index fab13af..abea24e 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -454,6 +454,14 @@ + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; ++ ++ codec_clk: clk@01c20140 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-codec-clk"; ++ reg = <0x01c20140 0x4>; ++ clocks = <&pll2 0>; ++ clock-output-names = "codec"; ++ }; + }; + + soc@01c00000 { +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index a4b6a66..5c0edd6 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -292,6 +292,14 @@ + clock-output-names = "usb_ohci0", "usb_phy"; + }; + ++ codec_clk: clk@01c20140 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-codec-clk"; ++ reg = <0x01c20140 0x4>; ++ clocks = <&pll2 0>; ++ clock-output-names = "codec"; ++ }; ++ + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 12d9ffd..400e696 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -468,6 +468,14 @@ + clock-output-names = "spi3"; + }; + ++ codec_clk: clk@01c20140 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-codec-clk"; ++ reg = <0x01c20140 0x4>; ++ clocks = <&pll2 0>; ++ clock-output-names = "codec"; ++ }; ++ + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch b/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch new file mode 100644 index 0000000000..5727c56e24 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch @@ -0,0 +1,74 @@ +From e9051f5dbc26e78f91cf23ca79ae4c8471119667 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Fri, 18 Jul 2014 15:26:08 -0300 +Subject: [PATCH] ARM: sun7i: Add mod1 clock nodes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This commit adds all the mod1 clocks available on A20 to its device +tree. This list was created by looking at the A20 user manual. + +Not-signed-off-by: Emilio López <emilio@elopez.com.ar> +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ + 1 file changed, 39 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 400e696..a0d18b2 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -450,6 +450,29 @@ + clock-output-names = "ir1"; + }; + ++ iis0_clk: clk@01c200b8 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod1-clk"; ++ reg = <0x01c200b8 0x4>; ++ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; ++ clock-output-names = "iis0"; ++ }; ++ ++ ac97_clk: clk@01c200bc { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod1-clk"; ++ reg = <0x01c200bc 0x4>; ++ clocks = <&pll2 3>, <&pll2 2>, <&pll2 1>, <&pll2 0>; ++ clock-output-names = "ac97"; ++ }; ++ ++ spdif_clk: clk@01c200c0 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod1-clk"; ++ reg = <0x01c200c0 0x4>; ++ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; ++ clock-output-names = "spdif"; ++ }; + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; +@@ -468,6 +491,22 @@ + clock-output-names = "spi3"; + }; + ++ iis1_clk: clk@01c200d8 { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod1-clk"; ++ reg = <0x01c200d8 0x4>; ++ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; ++ clock-output-names = "iis1"; ++ }; ++ ++ iis2_clk: clk@01c200dc { ++ #clock-cells = <0>; ++ compatible = "allwinner,sun4i-a10-mod1-clk"; ++ reg = <0x01c200dc 0x4>; ++ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; ++ clock-output-names = "iis2"; ++ }; ++ + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch b/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch new file mode 100644 index 0000000000..223993fb17 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch @@ -0,0 +1,23 @@ +From ed5c1e047de4e8a849cd0517590d5c1bbf3247fc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> +Date: Sun, 17 Aug 2014 19:25:53 -0300 +Subject: [PATCH] resort pll parents for audio + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index a0d18b2..1cced70 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -470,7 +470,7 @@ + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; +- clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; ++ clocks = <&pll2 3>, <&pll2 2>, <&pll2 1>, <&pll2 0>; + clock-output-names = "spdif"; + }; + usb_clk: clk@01c200cc { diff --git a/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch b/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch new file mode 100644 index 0000000000..a83cda2f73 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch @@ -0,0 +1,878 @@ +From 97dcb50623db12f13c9c9a8b68dca61901b7f030 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> +Date: Mon, 14 Jul 2014 20:25:23 -0300 +Subject: [PATCH] ASoC: sunxi: add support for the on-chip codec on early + Allwinner SoCs + +The sun4i, sun5i and sun7i SoC families have a built-in codec, capable +of both audio capture and playback. This memory-mapped device can be fed +with audio data via the Allwinner DMA controller. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + sound/soc/Kconfig | 1 + + sound/soc/Makefile | 1 + + sound/soc/sunxi/Kconfig | 10 + + sound/soc/sunxi/Makefile | 2 + + sound/soc/sunxi/sunxi-codec.c | 802 ++++++++++++++++++++++++++++++++++++++++++ + 5 files changed, 816 insertions(+) + create mode 100644 sound/soc/sunxi/Kconfig + create mode 100644 sound/soc/sunxi/Makefile + create mode 100644 sound/soc/sunxi/sunxi-codec.c + +diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig +index 3ba52da..87dbf48 100644 +--- a/sound/soc/Kconfig ++++ b/sound/soc/Kconfig +@@ -53,6 +53,7 @@ source "sound/soc/samsung/Kconfig" + source "sound/soc/sh/Kconfig" + source "sound/soc/sirf/Kconfig" + source "sound/soc/spear/Kconfig" ++source "sound/soc/sunxi/Kconfig" + source "sound/soc/tegra/Kconfig" + source "sound/soc/txx9/Kconfig" + source "sound/soc/ux500/Kconfig" +diff --git a/sound/soc/Makefile b/sound/soc/Makefile +index 974ba70..39011b8 100644 +--- a/sound/soc/Makefile ++++ b/sound/soc/Makefile +@@ -34,6 +34,7 @@ obj-$(CONFIG_SND_SOC) += samsung/ + obj-$(CONFIG_SND_SOC) += sh/ + obj-$(CONFIG_SND_SOC) += sirf/ + obj-$(CONFIG_SND_SOC) += spear/ ++obj-$(CONFIG_SND_SOC) += sunxi/ + obj-$(CONFIG_SND_SOC) += tegra/ + obj-$(CONFIG_SND_SOC) += txx9/ + obj-$(CONFIG_SND_SOC) += ux500/ +diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig +new file mode 100644 +index 0000000..79511ae +--- /dev/null ++++ b/sound/soc/sunxi/Kconfig +@@ -0,0 +1,10 @@ ++menu "SoC Audio support for Allwinner SoCs" ++ depends on ARCH_SUNXI ++ ++config SND_SUNXI_SOC_CODEC ++ tristate "APB on-chip sun4i/sun5i/sun7i CODEC" ++ select SND_SOC_GENERIC_DMAENGINE_PCM ++ select REGMAP_MMIO ++ default y ++ ++endmenu +diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile +new file mode 100644 +index 0000000..b8950d3 +--- /dev/null ++++ b/sound/soc/sunxi/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_SND_SUNXI_SOC_CODEC) += sunxi-codec.o ++ +diff --git a/sound/soc/sunxi/sunxi-codec.c b/sound/soc/sunxi/sunxi-codec.c +new file mode 100644 +index 0000000..67f978e +--- /dev/null ++++ b/sound/soc/sunxi/sunxi-codec.c +@@ -0,0 +1,802 @@ ++/* ++ * Copyright 2014 Emilio López <emilio@elopez.com.ar> ++ * Copyright 2014 Jon Smirl <jonsmirl@gmail.com> ++ * ++ * Based on the Allwinner SDK driver, released under the GPL. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/slab.h> ++#include <linux/of.h> ++#include <linux/of_platform.h> ++#include <linux/of_address.h> ++#include <linux/clk.h> ++#include <linux/regmap.h> ++ ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/soc.h> ++#include <sound/tlv.h> ++#include <sound/initval.h> ++#include <sound/dmaengine_pcm.h> ++ ++/* Codec DAC register offsets and bit fields */ ++#define SUNXI_DAC_DPC (0x00) ++#define SUNXI_DAC_DPC_EN_DA (31) ++#define SUNXI_DAC_DPC_DVOL (12) ++#define SUNXI_DAC_FIFOC (0x04) ++#define SUNXI_DAC_FIFOC_DAC_FS (29) ++#define SUNXI_DAC_FIFOC_FIR_VERSION (28) ++#define SUNXI_DAC_FIFOC_SEND_LASAT (26) ++#define SUNXI_DAC_FIFOC_TX_FIFO_MODE (24) ++#define SUNXI_DAC_FIFOC_DRQ_CLR_CNT (21) ++#define SUNXI_DAC_FIFOC_TX_TRIG_LEVEL (8) ++#define SUNXI_DAC_FIFOC_MONO_EN (6) ++#define SUNXI_DAC_FIFOC_TX_SAMPLE_BITS (5) ++#define SUNXI_DAC_FIFOC_DAC_DRQ_EN (4) ++#define SUNXI_DAC_FIFOC_FIFO_FLUSH (0) ++#define SUNXI_DAC_FIFOS (0x08) ++#define SUNXI_DAC_TXDATA (0x0c) ++#define SUNXI_DAC_ACTL (0x10) ++#define SUNXI_DAC_ACTL_DACAENR (31) ++#define SUNXI_DAC_ACTL_DACAENL (30) ++#define SUNXI_DAC_ACTL_MIXEN (29) ++#define SUNXI_DAC_ACTL_LDACLMIXS (15) ++#define SUNXI_DAC_ACTL_RDACRMIXS (14) ++#define SUNXI_DAC_ACTL_LDACRMIXS (13) ++#define SUNXI_DAC_ACTL_DACPAS (8) ++#define SUNXI_DAC_ACTL_MIXPAS (7) ++#define SUNXI_DAC_ACTL_PA_MUTE (6) ++#define SUNXI_DAC_ACTL_PA_VOL (0) ++#define SUNXI_DAC_TUNE (0x14) ++#define SUNXI_DAC_DEBUG (0x18) ++ ++/* Codec ADC register offsets and bit fields */ ++#define SUNXI_ADC_FIFOC (0x1c) ++#define SUNXI_ADC_FIFOC_EN_AD (28) ++#define SUNXI_ADC_FIFOC_RX_FIFO_MODE (24) ++#define SUNXI_ADC_FIFOC_RX_TRIG_LEVEL (8) ++#define SUNXI_ADC_FIFOC_MONO_EN (7) ++#define SUNXI_ADC_FIFOC_RX_SAMPLE_BITS (6) ++#define SUNXI_ADC_FIFOC_ADC_DRQ_EN (4) ++#define SUNXI_ADC_FIFOC_FIFO_FLUSH (0) ++#define SUNXI_ADC_FIFOS (0x20) ++#define SUNXI_ADC_RXDATA (0x24) ++#define SUNXI_ADC_ACTL (0x28) ++#define SUNXI_ADC_ACTL_ADCREN (31) ++#define SUNXI_ADC_ACTL_ADCLEN (30) ++#define SUNXI_ADC_ACTL_PREG1EN (29) ++#define SUNXI_ADC_ACTL_PREG2EN (28) ++#define SUNXI_ADC_ACTL_VMICEN (27) ++#define SUNXI_ADC_ACTL_VADCG (20) ++#define SUNXI_ADC_ACTL_ADCIS (17) ++#define SUNXI_ADC_ACTL_PA_EN (4) ++#define SUNXI_ADC_ACTL_DDE (3) ++#define SUNXI_ADC_DEBUG (0x2c) ++ ++/* Other various ADC registers */ ++#define SUNXI_DAC_TXCNT (0x30) ++#define SUNXI_ADC_RXCNT (0x34) ++#define SUNXI_AC_SYS_VERI (0x38) ++#define SUNXI_AC_MIC_PHONE_CAL (0x3c) ++ ++/* Supported SoC families - used for quirks */ ++enum sunxi_soc_family { ++ SUN4IA, /* A10 SoC - revision A */ ++ SUN4I, /* A10 SoC - later revisions */ ++ SUN5I, /* A10S/A13 SoCs */ ++ SUN7I, /* A20 SoC */ ++}; ++ ++struct sunxi_priv { ++ struct regmap *regmap; ++ struct clk *clk_apb, *clk_module; ++ ++ enum sunxi_soc_family revision; ++ ++ struct snd_dmaengine_dai_dma_data playback_dma_data; ++ struct snd_dmaengine_dai_dma_data capture_dma_data; ++}; ++ ++static void sunxi_codec_play_start(struct sunxi_priv *priv) ++{ ++ /* TODO: see if we need to drive PA GPIO high */ ++ ++ /* flush TX FIFO */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH); ++ ++ /* enable DAC DRQ */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN); ++} ++ ++static void sunxi_codec_play_stop(struct sunxi_priv *priv) ++{ ++ /* TODO: see if we need to drive PA GPIO low */ ++ ++ /* disable DAC DRQ */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN, 0x0 << SUNXI_DAC_FIFOC_DAC_DRQ_EN); ++} ++ ++static void sunxi_codec_capture_start(struct sunxi_priv *priv) ++{ ++ /* TODO: see if we need to drive PA GPIO high */ ++ ++ /* enable ADC DRQ */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN); ++} ++ ++static void sunxi_codec_capture_stop(struct sunxi_priv *priv) ++{ ++ /* disable ADC DRQ */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN, 0x0 << SUNXI_ADC_FIFOC_ADC_DRQ_EN); ++ ++ /* enable mic1 PA */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_PREG1EN, 0x0 << SUNXI_ADC_ACTL_PREG1EN); ++ ++ /* enable VMIC */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_VMICEN, 0x0 << SUNXI_ADC_ACTL_VMICEN); ++ if (priv->revision == SUN7I) { ++ /* TODO: undocumented */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_TUNE, 0x3 << 8, 0x0 << 8); ++ } ++ ++ /* enable ADC digital */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_EN_AD, 0x0 << SUNXI_ADC_FIFOC_EN_AD); ++ ++ /* set RX FIFO mode */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE, 0x0 << SUNXI_ADC_FIFOC_RX_FIFO_MODE); ++ ++ /* flush RX FIFO */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH, 0x0 << SUNXI_ADC_FIFOC_FIFO_FLUSH); ++ ++ /* enable adc1 analog */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << SUNXI_ADC_ACTL_ADCLEN, 0x0 << SUNXI_ADC_ACTL_ADCLEN); ++} ++ ++static int sunxi_codec_trigger(struct snd_pcm_substream *substream, int cmd, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ case SNDRV_PCM_TRIGGER_RESUME: ++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ++ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) ++ sunxi_codec_capture_start(priv); ++ else ++ sunxi_codec_play_start(priv); ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ case SNDRV_PCM_TRIGGER_SUSPEND: ++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ++ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) ++ sunxi_codec_capture_stop(priv); ++ else ++ sunxi_codec_play_stop(priv); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int sunxi_codec_prepare(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); ++ ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH); ++ ++ /* set TX FIFO send DRQ level */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x3f << SUNXI_DAC_FIFOC_TX_TRIG_LEVEL, 0xf << SUNXI_DAC_FIFOC_TX_TRIG_LEVEL); ++ if (substream->runtime->rate > 32000) { ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x0 << SUNXI_DAC_FIFOC_FIR_VERSION); ++ } else { ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION); ++ } ++ ++ /* set TX FIFO MODE - 0 works for both 16 and 24 bits */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, 0x0 << SUNXI_DAC_FIFOC_TX_FIFO_MODE); ++ ++ /* send last sample when DAC FIFO under run */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_SEND_LASAT, 0x0 << SUNXI_DAC_FIFOC_SEND_LASAT); ++ } else { ++ /* enable mic1 PA */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_PREG1EN, 0x1 << SUNXI_ADC_ACTL_PREG1EN); ++ ++ /* mic1 gain 32dB */ /* FIXME - makes no sense */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << 25, 0x1 << 25); ++ ++ /* enable VMIC */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_VMICEN, 0x1 << SUNXI_ADC_ACTL_VMICEN); ++ ++ if (priv->revision == SUN7I) { ++ /* boost up record effect */ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_TUNE, 0x3 << 8, 0x1 << 8); ++ } ++ ++ /* enable ADC digital */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_EN_AD, 0x1 << SUNXI_ADC_FIFOC_EN_AD); ++ ++ /* set RX FIFO mode */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE); ++ ++ /* flush RX FIFO */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH); ++ ++ /* set RX FIFO rec drq level */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0xf << SUNXI_ADC_FIFOC_RX_TRIG_LEVEL, 0x7 << SUNXI_ADC_FIFOC_RX_TRIG_LEVEL); ++ ++ /* enable adc1 analog */ ++ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << SUNXI_ADC_ACTL_ADCLEN, 0x3 << SUNXI_ADC_ACTL_ADCLEN); ++ } ++ ++ return 0; ++} ++ ++static int sunxi_codec_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); ++ int is_mono = !!(params_channels(params) == 1); ++ int is_24bit = !!(hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min == 32); ++ unsigned int rate = params_rate(params); ++ unsigned int hwrate; ++ ++ switch (rate) { ++ case 176400: ++ case 88200: ++ case 44100: ++ case 33075: ++ case 22050: ++ case 14700: ++ case 11025: ++ case 7350: ++ default: ++ clk_set_rate(priv->clk_module, 22579200); ++ break; ++ case 192000: ++ case 96000: ++ case 48000: ++ case 32000: ++ case 24000: ++ case 16000: ++ case 12000: ++ case 8000: ++ clk_set_rate(priv->clk_module, 24576000); ++ break; ++ } ++ ++ switch (rate) { ++ case 192000: ++ case 176400: ++ hwrate = 6; ++ break; ++ case 96000: ++ case 88200: ++ hwrate = 7; ++ break; ++ default: ++ case 48000: ++ case 44100: ++ hwrate = 0; ++ break; ++ case 32000: ++ case 33075: ++ hwrate = 1; ++ break; ++ case 24000: ++ case 22050: ++ hwrate = 2; ++ break; ++ case 16000: ++ case 14700: ++ hwrate = 3; ++ break; ++ case 12000: ++ case 11025: ++ hwrate = 4; ++ break; ++ case 8000: ++ case 7350: ++ hwrate = 5; ++ break; ++ } ++ ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_MONO_EN, is_mono << SUNXI_DAC_FIFOC_MONO_EN); ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS, is_24bit << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS); ++ if (is_24bit) ++ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ else ++ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; ++ } else { ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); ++ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 1 << SUNXI_ADC_FIFOC_MONO_EN, is_mono << SUNXI_ADC_FIFOC_MONO_EN); ++ } ++ ++ return 0; ++} ++ ++static const struct snd_kcontrol_new sun7i_dac_ctls[] = { ++ /*SUNXI_DAC_ACTL = 0x10,PAVOL*/ ++ SOC_SINGLE("Master Playback Volume", SUNXI_DAC_ACTL, 0, 0x3f, 0), ++ SOC_SINGLE("Playback Switch", SUNXI_DAC_ACTL, 6, 1, 0), /* Global output switch */ ++ SOC_SINGLE("FmL Switch", SUNXI_DAC_ACTL, 17, 1, 0), /* FM left switch */ ++ SOC_SINGLE("FmR Switch", SUNXI_DAC_ACTL, 16, 1, 0), /* FM right switch */ ++ SOC_SINGLE("LineL Switch", SUNXI_DAC_ACTL, 19, 1, 0), /* Line left switch */ ++ SOC_SINGLE("LineR Switch", SUNXI_DAC_ACTL, 18, 1, 0), /* Line right switch */ ++ SOC_SINGLE("Ldac Left Mixer", SUNXI_DAC_ACTL, 15, 1, 0), ++ SOC_SINGLE("Rdac Right Mixer", SUNXI_DAC_ACTL, 14, 1, 0), ++ SOC_SINGLE("Ldac Right Mixer", SUNXI_DAC_ACTL, 13, 1, 0), ++ SOC_SINGLE("Mic Input Mux", SUNXI_DAC_ACTL, 9, 15, 0), /* from bit 9 to bit 12. Microphone input mute */ ++ SOC_SINGLE("MIC output volume", SUNXI_DAC_ACTL, 20, 7, 0), ++ /* FM Input to output mixer Gain Control ++ * From -4.5db to 6db,1.5db/step,default is 0db ++ * -4.5db:0x0,-3.0db:0x1,-1.5db:0x2,0db:0x3 ++ * 1.5db:0x4,3.0db:0x5,4.5db:0x6,6db:0x7 ++ */ ++ SOC_SINGLE("Fm output Volume", SUNXI_DAC_ACTL, 23, 7, 0), ++ /* Line-in gain stage to output mixer Gain Control ++ * 0:-1.5db,1:0db ++ */ ++ SOC_SINGLE("Line output Volume", SUNXI_DAC_ACTL, 26, 1, 0), ++ ++ SOC_SINGLE("Master Capture Mute", SUNXI_ADC_ACTL, 4, 1, 0), ++ SOC_SINGLE("Right Capture Mute", SUNXI_ADC_ACTL, 31, 1, 0), ++ SOC_SINGLE("Left Capture Mute", SUNXI_ADC_ACTL, 30, 1, 0), ++ SOC_SINGLE("Linein Pre-AMP", SUNXI_ADC_ACTL, 13, 7, 0), ++ SOC_SINGLE("LINEIN APM Volume", SUNXI_AC_MIC_PHONE_CAL, 13, 0x7, 0), ++ /* ADC Input Gain Control, capture volume ++ * 000:-4.5db,001:-3db,010:-1.5db,011:0db,100:1.5db,101:3db,110:4.5db,111:6db ++ */ ++ SOC_SINGLE("Capture Volume", SUNXI_ADC_ACTL, 20, 7, 0), ++ /* ++ * MIC2 pre-amplifier Gain Control ++ * 00:0db,01:35db,10:38db,11:41db ++ */ ++ SOC_SINGLE("MicL Volume", SUNXI_ADC_ACTL, 25, 3, 0), /* Microphone left volume */ ++ SOC_SINGLE("MicR Volume", SUNXI_ADC_ACTL, 23, 3, 0), /* Microphone right volume */ ++ SOC_SINGLE("Mic2 Boost", SUNXI_ADC_ACTL, 29, 1, 0), ++ SOC_SINGLE("Mic1 Boost", SUNXI_ADC_ACTL, 28, 1, 0), ++ SOC_SINGLE("Mic Power", SUNXI_ADC_ACTL, 27, 1, 0), ++ SOC_SINGLE("ADC Input Mux", SUNXI_ADC_ACTL, 17, 7, 0), /* ADC input mute */ ++ SOC_SINGLE("Mic2 gain Volume", SUNXI_AC_MIC_PHONE_CAL, 26, 7, 0), ++ /* ++ * MIC1 pre-amplifier Gain Control ++ * 00:0db,01:35db,10:38db,11:41db ++ */ ++ SOC_SINGLE("Mic1 gain Volume", SUNXI_AC_MIC_PHONE_CAL, 29, 3, 0), ++}; ++ ++static int sunxi_codec_dai_probe(struct snd_soc_dai *dai) ++{ ++ struct snd_soc_card *card = snd_soc_dai_get_drvdata(dai); ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(card); ++ ++ snd_soc_dai_init_dma_data(dai, &priv->playback_dma_data, &priv->capture_dma_data); ++ ++ return 0; ++} ++ ++static void sunxi_codec_init(struct sunxi_priv *priv) ++{ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_FIR_VERSION, 1 << SUNXI_DAC_FIFOC_FIR_VERSION); ++ ++ /* set digital volume to maximum */ ++ if (priv->revision == SUN4IA) ++ regmap_update_bits(priv->regmap, SUNXI_DAC_DPC, 0x3F << SUNXI_DAC_DPC_DVOL, 0 << SUNXI_DAC_DPC_DVOL); ++ ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 3 << SUNXI_DAC_FIFOC_DRQ_CLR_CNT, 3 << SUNXI_DAC_FIFOC_DRQ_CLR_CNT); ++ ++ /* set volume */ /* TODO: is A10A inverted? */ ++ if (priv->revision == SUN4IA) ++ regmap_update_bits(priv->regmap, SUNXI_DAC_ACTL, 0x3f << SUNXI_DAC_ACTL_PA_VOL, 1 << SUNXI_DAC_ACTL_PA_VOL); ++ else ++ regmap_update_bits(priv->regmap, SUNXI_DAC_ACTL, 0x3f << SUNXI_DAC_ACTL_PA_VOL, 0x3b << SUNXI_DAC_ACTL_PA_VOL); ++} ++ ++static int sunxi_codec_startup(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); ++ ++ sunxi_codec_init(priv); ++ ++ return clk_prepare_enable(priv->clk_module); ++} ++ ++static void sunxi_codec_shutdown(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); ++ ++ clk_disable_unprepare(priv->clk_module); ++} ++ ++/*** Codec DAI ***/ ++ ++static const struct snd_soc_dai_ops sunxi_codec_dai_ops = { ++ .startup = sunxi_codec_startup, ++ .shutdown = sunxi_codec_shutdown, ++ .trigger = sunxi_codec_trigger, ++ .hw_params = sunxi_codec_hw_params, ++ .prepare = sunxi_codec_prepare, ++}; ++ ++static struct snd_soc_dai_driver sunxi_codec_dai = { ++ .name = "Codec", ++ .playback = { ++ .stream_name = "Codec Playback", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rate_min = 8000, ++ .rate_max = 192000, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_11025 |\ ++ SNDRV_PCM_RATE_22050| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ ++ SNDRV_PCM_RATE_48000 |SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000 |\ ++ SNDRV_PCM_RATE_KNOT), ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE), ++ .sig_bits = 24, ++ }, ++ .capture = { ++ .stream_name = "Codec Capture", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rate_min = 8000, ++ .rate_max = 192000, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_11025 |\ ++ SNDRV_PCM_RATE_22050| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ ++ SNDRV_PCM_RATE_48000 |SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000 |\ ++ SNDRV_PCM_RATE_KNOT), ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE), ++ .sig_bits = 24, ++ }, ++ .ops = &sunxi_codec_dai_ops, ++}; ++ ++/*** Codec ***/ ++ ++static const struct snd_kcontrol_new sunxi_pa = ++ SOC_DAPM_SINGLE("PA Switch", SUNXI_ADC_ACTL, SUNXI_ADC_ACTL_PA_EN, 1, 0); ++ ++static const struct snd_kcontrol_new sunxi_pa_mute = ++ SOC_DAPM_SINGLE("PA Mute Switch", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_MUTE, 1, 0); ++ ++static DECLARE_TLV_DB_SCALE(sunxi_pa_volume_scale, -6300, 100, 1); ++ ++static const struct snd_kcontrol_new sunxi_codec_widgets[] = { ++ SOC_SINGLE_TLV("PA Volume", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_VOL, ++ 0x3F, 0, sunxi_pa_volume_scale), ++}; ++ ++static const char *right_output_mixer_text[] = { "Disabled", "Left", "Right" }; ++static const unsigned int right_output_mixer_values[] = { 0x0, 0x1, 0x2 }; ++static SOC_VALUE_ENUM_SINGLE_DECL(right_output_mixer, SUNXI_DAC_ACTL, ++ SUNXI_DAC_ACTL_LDACRMIXS, 0x3, ++ right_output_mixer_text, ++ right_output_mixer_values); ++ ++static const char *left_output_mixer_text[] = { "Disabled", "Left" }; ++static const unsigned int left_output_mixer_values[] = { 0x0, 0x1 }; ++static SOC_VALUE_ENUM_SINGLE_DECL(left_output_mixer, SUNXI_DAC_ACTL, ++ SUNXI_DAC_ACTL_LDACLMIXS, 0x1, ++ left_output_mixer_text, ++ left_output_mixer_values); ++ ++static const struct snd_kcontrol_new right_mixer = ++ SOC_DAPM_ENUM("Right Mixer", right_output_mixer); ++ ++static const struct snd_kcontrol_new left_mixer = ++ SOC_DAPM_ENUM("Left Mixer", left_output_mixer); ++ ++static const struct snd_kcontrol_new sunxi_mixer = ++ SOC_DAPM_SINGLE("Mixer Switch", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXEN, 1, 0); ++ ++static const char *sunxi_dac_output_text[] = { "Muted", "Mixed", "Direct" }; ++static const unsigned int sunxi_dac_output_values[] = { 0x0, 0x1, 0x2 }; ++static SOC_VALUE_ENUM_SINGLE_DECL(dac_output_mux, SUNXI_DAC_ACTL, ++ SUNXI_DAC_ACTL_MIXPAS, 0x3, ++ sunxi_dac_output_text, ++ sunxi_dac_output_values); ++ ++static const struct snd_kcontrol_new sunxi_dac_output = ++ SOC_DAPM_ENUM("DAC Output", dac_output_mux); ++ ++static const struct snd_soc_dapm_widget codec_dapm_widgets[] = { ++ /* Digital parts of the DACs */ ++ SND_SOC_DAPM_SUPPLY("DAC", SUNXI_DAC_DPC, SUNXI_DAC_DPC_EN_DA, 0, NULL, 0), ++ ++ /* Analog parts of the DACs */ ++ SND_SOC_DAPM_DAC("Left DAC", NULL, SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_DACAENL, 0), ++ SND_SOC_DAPM_DAC("Right DAC", NULL, SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_DACAENR, 0), ++ ++ SND_SOC_DAPM_SWITCH("PA", SUNXI_ADC_ACTL, SUNXI_ADC_ACTL_PA_EN, 0, &sunxi_pa), ++ SND_SOC_DAPM_SWITCH("PA Mute", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_MUTE, 0, &sunxi_pa_mute), ++ ++ SND_SOC_DAPM_MUX("Right Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_LDACRMIXS, 0, &right_mixer), ++ SND_SOC_DAPM_MUX("Left Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_LDACLMIXS, 0, &left_mixer), ++ SND_SOC_DAPM_SWITCH("Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXEN, 0, &sunxi_mixer), ++ ++ SND_SOC_DAPM_MUX("DAC Output", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXPAS, 0, &sunxi_dac_output), ++ ++ SND_SOC_DAPM_OUTPUT("Mic Bias"), ++ SND_SOC_DAPM_OUTPUT("HP Right"), ++ SND_SOC_DAPM_OUTPUT("HP Left"), ++ SND_SOC_DAPM_INPUT("MIC_IN"), ++ SND_SOC_DAPM_INPUT("LINE_IN"), ++}; ++ ++static const struct snd_soc_dapm_route codec_dapm_routes[] = { ++ /* DAC block */ ++ { "Left DAC", NULL, "Codec Playback" }, ++ { "Right DAC", NULL, "Codec Playback" }, ++ { "Left DAC", NULL, "DAC" }, ++ { "Right DAC", NULL, "DAC" }, ++ ++ /* DAC -> PA path */ ++ { "DAC Output", "Direct", "Left DAC" }, ++ { "DAC Output", "Direct", "Right DAC" }, ++ { "PA", NULL, "DAC Output"}, ++ ++ /* DAC -> MIX -> PA path */ ++ { "Left Mixer", "Left", "Left DAC" }, ++ { "Right Mixer", "Right", "Right DAC" }, ++ { "Mixer", NULL, "Left Mixer" }, ++ { "Mixer", NULL, "Right Mixer" }, ++ { "DAC Output", "Mixed", "Mixer" }, ++ { "PA", NULL, "DAC Output" }, ++ ++ /* PA -> HP path */ ++ { "PA Mute", NULL, "PA" }, ++ { "HP Right", NULL, "PA Mute" }, ++ { "HP Left", NULL, "PA Mute" }, ++}; ++ ++static struct snd_soc_codec_driver sunxi_codec = { ++ .controls = sunxi_codec_widgets, ++ .num_controls = ARRAY_SIZE(sunxi_codec_widgets), ++ .dapm_widgets = codec_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(codec_dapm_widgets), ++ .dapm_routes = codec_dapm_routes, ++ .num_dapm_routes = ARRAY_SIZE(codec_dapm_routes), ++}; ++ ++/*** Board routing ***/ ++/* TODO: do this with DT */ ++ ++static const struct snd_soc_dapm_widget sunxi_board_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headphone Jack", NULL), ++}; ++ ++static const struct snd_soc_dapm_route sunxi_board_routing[] = { ++ { "Headphone Jack", NULL, "HP Right" }, ++ { "Headphone Jack", NULL, "HP Left" }, ++}; ++ ++/*** Card and DAI Link ***/ ++ ++static struct snd_soc_dai_link cdc_dai = { ++ .name = "cdc", ++ ++ .stream_name = "CDC PCM", ++ .codec_dai_name = "Codec", ++ .cpu_dai_name = "1c22c00.codec", ++ .codec_name = "1c22c00.codec", ++ .platform_name = "1c22c00.codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S, ++}; ++ ++static struct snd_soc_card snd_soc_sunxi_codec = { ++ .name = "sunxi-codec", ++ .owner = THIS_MODULE, ++ .dai_link = &cdc_dai, ++ .num_links = 1, ++ .dapm_widgets = sunxi_board_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(sunxi_board_dapm_widgets), ++ .dapm_routes = sunxi_board_routing, ++ .num_dapm_routes = ARRAY_SIZE(sunxi_board_routing), ++}; ++ ++/*** CPU DAI ***/ ++ ++static const struct snd_soc_component_driver sunxi_codec_component = { ++ .name = "sunxi-codec", ++}; ++ ++#define SUNXI_RATES SNDRV_PCM_RATE_8000_192000 ++#define SUNXI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ ++ SNDRV_PCM_FMTBIT_S32_LE) ++ ++static struct snd_soc_dai_driver dummy_cpu_dai = { ++ .name = "sunxi-cpu-dai", ++ .probe = sunxi_codec_dai_probe, ++ .playback = { ++ .stream_name = "Playback", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = SUNXI_RATES, ++ .formats = SUNXI_FORMATS, ++ .sig_bits = 24, ++ }, ++ .capture = { ++ .stream_name = "Capture", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = SUNXI_RATES, ++ .formats = SUNXI_FORMATS, ++ .sig_bits = 24, ++ }, ++}; ++ ++static const struct regmap_config sunxi_codec_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++ .max_register = SUNXI_AC_MIC_PHONE_CAL, ++}; ++ ++static const struct of_device_id sunxi_codec_of_match[] = { ++ { .compatible = "allwinner,sun4i-a10a-codec", .data = (void *)SUN4IA}, ++ { .compatible = "allwinner,sun4i-a10-codec", .data = (void *)SUN4I}, ++ { .compatible = "allwinner,sun5i-a13-codec", .data = (void *)SUN5I}, ++ { .compatible = "allwinner,sun7i-a20-codec", .data = (void *)SUN7I}, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, sunxi_codec_of_match); ++ ++static int sunxi_codec_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct snd_soc_card *card = &snd_soc_sunxi_codec; ++ const struct of_device_id *of_id; ++ struct device *dev = &pdev->dev; ++ struct sunxi_priv *priv; ++ struct resource *res; ++ void __iomem *base; ++ int ret; ++ ++ if (!of_device_is_available(np)) ++ return -ENODEV; ++ ++ of_id = of_match_device(sunxi_codec_of_match, dev); ++ if (!of_id) ++ return -EINVAL; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ card->dev = &pdev->dev; ++ platform_set_drvdata(pdev, card); ++ snd_soc_card_set_drvdata(card, priv); ++ ++ priv->revision = (enum sunxi_soc_family)of_id->data; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, ++ &sunxi_codec_regmap_config); ++ if (IS_ERR(priv->regmap)) ++ return PTR_ERR(priv->regmap); ++ ++ /* Get the clocks from the DT */ ++ priv->clk_apb = devm_clk_get(dev, "apb"); ++ if (IS_ERR(priv->clk_apb)) { ++ dev_err(dev, "failed to get apb clock\n"); ++ return PTR_ERR(priv->clk_apb); ++ } ++ priv->clk_module = devm_clk_get(dev, "codec"); ++ if (IS_ERR(priv->clk_module)) { ++ dev_err(dev, "failed to get codec clock\n"); ++ return PTR_ERR(priv->clk_module); ++ } ++ ++ /* Enable the clock on a basic rate */ ++ ret = clk_set_rate(priv->clk_module, 24576000); ++ if (ret) { ++ dev_err(dev, "failed to set codec base clock rate\n"); ++ return ret; ++ } ++ ++ /* Enable the bus clock */ ++ if (clk_prepare_enable(priv->clk_apb)) { ++ dev_err(dev, "failed to enable apb clock\n"); ++ clk_disable_unprepare(priv->clk_module); ++ return -EINVAL; ++ } ++ ++ /* DMA configuration for TX FIFO */ ++ priv->playback_dma_data.addr = res->start + SUNXI_DAC_TXDATA; ++ priv->playback_dma_data.maxburst = 4; ++ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; ++ ++ /* DMA configuration for RX FIFO */ ++ priv->capture_dma_data.addr = res->start + SUNXI_ADC_RXDATA; ++ priv->capture_dma_data.maxburst = 4; ++ priv->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; ++ ++ ret = snd_soc_register_codec(&pdev->dev, &sunxi_codec, &sunxi_codec_dai, 1); ++ ++ ret = devm_snd_soc_register_component(&pdev->dev, &sunxi_codec_component, &dummy_cpu_dai, 1); ++ if (ret) ++ goto err_clk_disable; ++ ++ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); ++ if (ret) ++ goto err_clk_disable; ++ ++ sunxi_codec_init(priv); ++ ++ ret = snd_soc_register_card(card); ++ if (ret) { ++ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); ++ goto err_fini_utils; ++ } ++ ++ ret = snd_soc_of_parse_audio_routing(card, "routing"); ++ if (ret) ++ goto err; ++ ++ return 0; ++ ++err_fini_utils: ++err: ++err_clk_disable: ++ clk_disable_unprepare(priv->clk_apb); ++ return ret; ++} ++ ++static int sunxi_codec_remove(struct platform_device *pdev) ++{ ++ struct sunxi_priv *priv = platform_get_drvdata(pdev); ++ ++ clk_disable_unprepare(priv->clk_apb); ++ clk_disable_unprepare(priv->clk_module); ++ ++ return 0; ++} ++ ++static struct platform_driver sunxi_codec_driver = { ++ .driver = { ++ .name = "sunxi-codec", ++ .owner = THIS_MODULE, ++ .of_match_table = sunxi_codec_of_match, ++ }, ++ .probe = sunxi_codec_probe, ++ .remove = sunxi_codec_remove, ++}; ++module_platform_driver(sunxi_codec_driver); ++ ++MODULE_DESCRIPTION("sunxi codec ASoC driver"); ++MODULE_AUTHOR("Emilio López <emilio@elopez.com.ar>"); ++MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch b/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch new file mode 100644 index 0000000000..120220ce3d --- /dev/null +++ b/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch @@ -0,0 +1,35 @@ +From f8517e7d836269f5fa1e1049394104417d3a7357 Mon Sep 17 00:00:00 2001 +From: "B.R. Oake" <broake@openmailbox.org> +Date: Sat, 6 Sep 2014 14:58:50 +0000 +Subject: [PATCH] ASoC: sunxi-codec: Fix distortion on 16-bit mono + +Patch to remove distortion on 16-bit mono, based on the linux-sunxi-3.4 +code. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + sound/soc/sunxi/sunxi-codec.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/sound/soc/sunxi/sunxi-codec.c b/sound/soc/sunxi/sunxi-codec.c +index 67f978e..77a191b 100644 +--- a/sound/soc/sunxi/sunxi-codec.c ++++ b/sound/soc/sunxi/sunxi-codec.c +@@ -215,9 +215,6 @@ static int sunxi_codec_prepare(struct snd_pcm_substream *substream, + regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION); + } + +- /* set TX FIFO MODE - 0 works for both 16 and 24 bits */ +- regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, 0x0 << SUNXI_DAC_FIFOC_TX_FIFO_MODE); +- + /* send last sample when DAC FIFO under run */ + regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_SEND_LASAT, 0x0 << SUNXI_DAC_FIFOC_SEND_LASAT); + } else { +@@ -329,6 +326,7 @@ static int sunxi_codec_hw_params(struct snd_pcm_substream *substream, + regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); + regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_MONO_EN, is_mono << SUNXI_DAC_FIFOC_MONO_EN); + regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS, is_24bit << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS); ++ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, !is_24bit << SUNXI_DAC_FIFOC_TX_FIFO_MODE); + if (is_24bit) + priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + else diff --git a/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch b/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch new file mode 100644 index 0000000000..8500e9dc6d --- /dev/null +++ b/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch @@ -0,0 +1,36 @@ +From ca3f125c08bab943572a15ac3a52f33f132cf77f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> +Date: Mon, 18 Aug 2014 01:07:55 -0300 +Subject: [PATCH] ARM: sun7i: dt: Add sunxi codec device node + +The A20 SoC includes the Allwinner audio codec, capable of both 24-bit +playback and capture. This commit adds a device node for it. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 1cced70..a99bbae 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -1214,6 +1214,18 @@ + status = "disabled"; + }; + ++ codec: codec@01c22c00 { ++ #sound-dai-cells = <0>; ++ compatible = "allwinner,sun7i-a20-codec"; ++ reg = <0x01c22c00 0x40>; ++ interrupts = <0 30 4>; ++ clocks = <&apb0_gates 0>, <&codec_clk>; ++ clock-names = "apb", "codec"; ++ dmas = <&dma 0 19>, <&dma 0 19>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ }; ++ + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; diff --git a/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch b/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch new file mode 100644 index 0000000000..c59f61b57d --- /dev/null +++ b/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch @@ -0,0 +1,14 @@ +diff -ruN old/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts new/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +--- old/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts 2015-07-10 18:50:06.000000000 +0200 ++++ new/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts 2015-08-02 11:45:06.000000000 +0200 +@@ -245,3 +245,10 @@ + }; + }; + ++ ++&codec { ++ routing = ++ "Headphone Jack", "HP Left", ++ "Headphone Jack", "HP Right"; ++ status = "okay"; ++}; diff --git a/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch b/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch new file mode 100644 index 0000000000..0f54548dcd --- /dev/null +++ b/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch @@ -0,0 +1,28 @@ +From f9681320a1c1caed9c899acfefcb308ac7c911d1 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard <maxime.ripard@free-electrons.com> +Date: Fri, 1 May 2015 22:39:45 +0200 +Subject: [PATCH] Add cubieboard2 audio codec + +Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> +--- + arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +index 39a51d5..5f9f0b9 100644 +--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts ++++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +@@ -84,6 +84,13 @@ + status = "okay"; + }; + ++&codec { ++ routing = ++ "Headphone Jack", "HP Left", ++ "Headphone Jack", "HP Right"; ++ status = "okay"; ++}; ++ + &cpu0 { + cpu-supply = <®_dcdc2>; + }; diff --git a/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch b/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch new file mode 100644 index 0000000000..7dc0b10c0e --- /dev/null +++ b/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch @@ -0,0 +1,31 @@ +From 42ac277ad129cf69d5540938c943f6291a7a9898 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> +Date: Mon, 18 Aug 2014 01:10:05 -0300 +Subject: [PATCH] ARM: sun7i: dt: enable audio codec on Cubietruck + +This commit enables the on-chip audio codec present on the A20 SoC +and outlines the SoC to connector routes for the Cubietruck. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +index 4611e2f..d05e06d 100644 +--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ++++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +@@ -105,6 +105,13 @@ + status = "okay"; + }; + ++&codec { ++ routing = ++ "Headphone Jack", "HP Left", ++ "Headphone Jack", "HP Right"; ++ status = "okay"; ++}; ++ + &cpu0 { + cpu-supply = <®_dcdc2>; + }; diff --git a/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch b/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch new file mode 100644 index 0000000000..5fc9e5aa66 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch @@ -0,0 +1,820 @@ +From 744543c599c420bcddca08cd2e2713b82a008328 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Wed, 8 Jul 2015 16:41:38 +0200 +Subject: [PATCH] usb: musb: sunxi: Add support for the Allwinner sunxi musb + controller + +This is based on initial code to get the Allwinner sunxi musb controller +supported by Chen-Yu Tsai and Roman Byshko. + +This adds support for the Allwinner sunxi musb controller in both host only +and otg mode. Peripheral only mode is not supported, as no boards use that. + +This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet +(A13 SoC) with a variety of devices in host mode and with the g_serial gadget +driver in peripheral mode, plugging otg / host cables in/out a lot of times +in all possible imaginable plug orders. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +Signed-off-by: Felipe Balbi <balbi@ti.com> +--- + .../bindings/usb/allwinner,sun4i-a10-musb.txt | 27 + + drivers/usb/musb/Kconfig | 13 +- + drivers/usb/musb/Makefile | 1 + + drivers/usb/musb/sunxi.c | 703 +++++++++++++++++++++ + 4 files changed, 743 insertions(+), 1 deletion(-) + create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt + create mode 100644 drivers/usb/musb/sunxi.c + +diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +new file mode 100644 +index 0000000..9254a6c +--- /dev/null ++++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +@@ -0,0 +1,27 @@ ++Allwinner sun4i A10 musb DRC/OTG controller ++------------------------------------------- ++ ++Required properties: ++ - compatible : "allwinner,sun4i-a10-musb" ++ - reg : mmio address range of the musb controller ++ - clocks : clock specifier for the musb controller ahb gate clock ++ - interrupts : interrupt to which the musb controller is connected ++ - interrupt-names : must be "mc" ++ - phys : phy specifier for the otg phy ++ - phy-names : must be "usb" ++ - dr_mode : Dual-Role mode must be "host" or "otg" ++ - extcon : extcon specifier for the otg phy ++ ++Example: ++ ++ usb_otg: usb@01c13000 { ++ compatible = "allwinner,sun4i-a10-musb"; ++ reg = <0x01c13000 0x0400>; ++ clocks = <&ahb_gates 0>; ++ interrupts = <38>; ++ interrupt-names = "mc"; ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ extcon = <&usbphy 0>; ++ status = "disabled"; ++ }; +diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig +index 39db8b6..37081ed 100644 +--- a/drivers/usb/musb/Kconfig ++++ b/drivers/usb/musb/Kconfig +@@ -5,7 +5,7 @@ + + # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller + config USB_MUSB_HDRC +- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' ++ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)' + depends on (USB || USB_GADGET) + help + Say Y here if your system has a dual role high speed USB +@@ -20,6 +20,8 @@ config USB_MUSB_HDRC + Analog Devices parts using this IP include Blackfin BF54x, + BF525 and BF527. + ++ Allwinner SoCs using this IP include A10, A13, A20, ... ++ + If you do not know what this is, please say N. + + To compile this driver as a module, choose M here; the +@@ -60,6 +62,15 @@ endchoice + + comment "Platform Glue Layer" + ++config USB_MUSB_SUNXI ++ tristate "Allwinner (sunxi)" ++ depends on ARCH_SUNXI ++ depends on NOP_USB_XCEIV ++ depends on PHY_SUN4I_USB ++ depends on EXTCON ++ depends on GENERIC_PHY ++ select SUNXI_SRAM ++ + config USB_MUSB_DAVINCI + tristate "DaVinci" + depends on ARCH_DAVINCI_DMx +diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile +index ba49501..f95befe 100644 +--- a/drivers/usb/musb/Makefile ++++ b/drivers/usb/musb/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o + obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o + obj-$(CONFIG_USB_MUSB_UX500) += ux500.o + obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o ++obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o + + + obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o +diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c +new file mode 100644 +index 0000000..00d7248 +--- /dev/null ++++ b/drivers/usb/musb/sunxi.c +@@ -0,0 +1,703 @@ ++/* ++ * Allwinner sun4i MUSB Glue Layer ++ * ++ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> ++ * ++ * Based on code from ++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/extcon.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/phy/phy-sun4i-usb.h> ++#include <linux/platform_device.h> ++#include <linux/soc/sunxi/sunxi_sram.h> ++#include <linux/usb/musb.h> ++#include <linux/usb/of.h> ++#include <linux/usb/usb_phy_generic.h> ++#include <linux/workqueue.h> ++#include "musb_core.h" ++ ++/* ++ * Register offsets, note sunxi musb has a different layout then most ++ * musb implementations, we translate the layout in musb_readb & friends. ++ */ ++#define SUNXI_MUSB_POWER 0x0040 ++#define SUNXI_MUSB_DEVCTL 0x0041 ++#define SUNXI_MUSB_INDEX 0x0042 ++#define SUNXI_MUSB_VEND0 0x0043 ++#define SUNXI_MUSB_INTRTX 0x0044 ++#define SUNXI_MUSB_INTRRX 0x0046 ++#define SUNXI_MUSB_INTRTXE 0x0048 ++#define SUNXI_MUSB_INTRRXE 0x004a ++#define SUNXI_MUSB_INTRUSB 0x004c ++#define SUNXI_MUSB_INTRUSBE 0x0050 ++#define SUNXI_MUSB_FRAME 0x0054 ++#define SUNXI_MUSB_TXFIFOSZ 0x0090 ++#define SUNXI_MUSB_TXFIFOADD 0x0092 ++#define SUNXI_MUSB_RXFIFOSZ 0x0094 ++#define SUNXI_MUSB_RXFIFOADD 0x0096 ++#define SUNXI_MUSB_FADDR 0x0098 ++#define SUNXI_MUSB_TXFUNCADDR 0x0098 ++#define SUNXI_MUSB_TXHUBADDR 0x009a ++#define SUNXI_MUSB_TXHUBPORT 0x009b ++#define SUNXI_MUSB_RXFUNCADDR 0x009c ++#define SUNXI_MUSB_RXHUBADDR 0x009e ++#define SUNXI_MUSB_RXHUBPORT 0x009f ++#define SUNXI_MUSB_CONFIGDATA 0x00c0 ++ ++/* VEND0 bits */ ++#define SUNXI_MUSB_VEND0_PIO_MODE 0 ++ ++/* flags */ ++#define SUNXI_MUSB_FL_ENABLED 0 ++#define SUNXI_MUSB_FL_HOSTMODE 1 ++#define SUNXI_MUSB_FL_HOSTMODE_PEND 2 ++#define SUNXI_MUSB_FL_VBUS_ON 3 ++#define SUNXI_MUSB_FL_PHY_ON 4 ++ ++/* Our read/write methods need access and do not get passed in a musb ref :| */ ++static struct musb *sunxi_musb; ++ ++struct sunxi_glue { ++ struct device *dev; ++ struct platform_device *musb; ++ struct clk *clk; ++ struct phy *phy; ++ struct platform_device *usb_phy; ++ struct usb_phy *xceiv; ++ unsigned long flags; ++ struct work_struct work; ++ struct extcon_dev *extcon; ++ struct notifier_block host_nb; ++}; ++ ++/* phy_power_on / off may sleep, so we use a workqueue */ ++static void sunxi_musb_work(struct work_struct *work) ++{ ++ struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); ++ bool vbus_on, phy_on; ++ ++ if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) ++ return; ++ ++ if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { ++ struct musb *musb = platform_get_drvdata(glue->musb); ++ unsigned long flags; ++ u8 devctl; ++ ++ spin_lock_irqsave(&musb->lock, flags); ++ ++ devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); ++ if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { ++ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ musb->xceiv->otg->default_a = 1; ++ musb->xceiv->otg->state = OTG_STATE_A_IDLE; ++ MUSB_HST_MODE(musb); ++ devctl |= MUSB_DEVCTL_SESSION; ++ } else { ++ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ musb->xceiv->otg->default_a = 0; ++ musb->xceiv->otg->state = OTG_STATE_B_IDLE; ++ MUSB_DEV_MODE(musb); ++ devctl &= ~MUSB_DEVCTL_SESSION; ++ } ++ writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); ++ ++ spin_unlock_irqrestore(&musb->lock, flags); ++ } ++ ++ vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); ++ ++ if (phy_on != vbus_on) { ++ if (vbus_on) { ++ phy_power_on(glue->phy); ++ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); ++ } else { ++ phy_power_off(glue->phy); ++ clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); ++ } ++ } ++} ++ ++static void sunxi_musb_set_vbus(struct musb *musb, int is_on) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ if (is_on) ++ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ else ++ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ ++ schedule_work(&glue->work); ++} ++ ++static void sunxi_musb_pre_root_reset_end(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ sun4i_usb_phy_set_squelch_detect(glue->phy, false); ++} ++ ++static void sunxi_musb_post_root_reset_end(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ sun4i_usb_phy_set_squelch_detect(glue->phy, true); ++} ++ ++static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) ++{ ++ struct musb *musb = __hci; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&musb->lock, flags); ++ ++ musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); ++ if (musb->int_usb) ++ writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); ++ ++ /* ++ * sunxi musb often signals babble on low / full speed device ++ * disconnect, without ever raising MUSB_INTR_DISCONNECT, since ++ * normally babble never happens treat it as disconnect. ++ */ ++ if ((musb->int_usb & MUSB_INTR_BABBLE) && is_host_active(musb)) { ++ musb->int_usb &= ~MUSB_INTR_BABBLE; ++ musb->int_usb |= MUSB_INTR_DISCONNECT; ++ } ++ ++ if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { ++ /* ep0 FADDR must be 0 when (re)entering peripheral mode */ ++ musb_ep_select(musb->mregs, 0); ++ musb_writeb(musb->mregs, MUSB_FADDR, 0); ++ } ++ ++ musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); ++ if (musb->int_tx) ++ writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); ++ ++ musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); ++ if (musb->int_rx) ++ writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); ++ ++ musb_interrupt(musb); ++ ++ spin_unlock_irqrestore(&musb->lock, flags); ++ ++ return IRQ_HANDLED; ++} ++ ++static int sunxi_musb_host_notifier(struct notifier_block *nb, ++ unsigned long event, void *ptr) ++{ ++ struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); ++ ++ if (event) ++ set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); ++ else ++ clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); ++ ++ set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); ++ schedule_work(&glue->work); ++ ++ return NOTIFY_DONE; ++} ++ ++static int sunxi_musb_init(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ int ret; ++ ++ sunxi_musb = musb; ++ musb->phy = glue->phy; ++ musb->xceiv = glue->xceiv; ++ ++ ret = sunxi_sram_claim(musb->controller->parent); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(glue->clk); ++ if (ret) ++ goto error_sram_release; ++ ++ writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); ++ ++ /* Register notifier before calling phy_init() */ ++ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) { ++ ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, ++ &glue->host_nb); ++ if (ret) ++ goto error_clk_disable; ++ } ++ ++ ret = phy_init(glue->phy); ++ if (ret) ++ goto error_unregister_notifier; ++ ++ if (musb->port_mode == MUSB_PORT_MODE_HOST) { ++ ret = phy_power_on(glue->phy); ++ if (ret) ++ goto error_phy_exit; ++ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); ++ /* Stop musb work from turning vbus off again */ ++ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); ++ } ++ ++ musb->isr = sunxi_musb_interrupt; ++ ++ /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ ++ pm_runtime_get(musb->controller); ++ ++ return 0; ++ ++error_phy_exit: ++ phy_exit(glue->phy); ++error_unregister_notifier: ++ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) ++ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, ++ &glue->host_nb); ++error_clk_disable: ++ clk_disable_unprepare(glue->clk); ++error_sram_release: ++ sunxi_sram_release(musb->controller->parent); ++ return ret; ++} ++ ++static int sunxi_musb_exit(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ pm_runtime_put(musb->controller); ++ ++ cancel_work_sync(&glue->work); ++ if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) ++ phy_power_off(glue->phy); ++ ++ phy_exit(glue->phy); ++ ++ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) ++ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, ++ &glue->host_nb); ++ ++ clk_disable_unprepare(glue->clk); ++ sunxi_sram_release(musb->controller->parent); ++ ++ return 0; ++} ++ ++static void sunxi_musb_enable(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ /* musb_core does not call us in a balanced manner */ ++ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) ++ return; ++ ++ schedule_work(&glue->work); ++} ++ ++static void sunxi_musb_disable(struct musb *musb) ++{ ++ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); ++ ++ clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); ++} ++ ++/* ++ * sunxi musb register layout ++ * 0x00 - 0x17 fifo regs, 1 long per fifo ++ * 0x40 - 0x57 generic control regs (power - frame) ++ * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) ++ * 0x90 - 0x97 fifo control regs (indexed) ++ * 0x98 - 0x9f multipoint / busctl regs (indexed) ++ * 0xc0 configdata reg ++ */ ++ ++static u32 sunxi_musb_fifo_offset(u8 epnum) ++{ ++ return (epnum * 4); ++} ++ ++static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) ++{ ++ WARN_ONCE(offset != 0, ++ "sunxi_musb_ep_offset called with non 0 offset\n"); ++ ++ return 0x80; /* indexed, so ignore epnum */ ++} ++ ++static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) ++{ ++ return SUNXI_MUSB_TXFUNCADDR + offset; ++} ++ ++static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset) ++{ ++ if (addr == sunxi_musb->mregs) { ++ /* generic control or fifo control reg access */ ++ switch (offset) { ++ case MUSB_FADDR: ++ return readb(addr + SUNXI_MUSB_FADDR); ++ case MUSB_POWER: ++ return readb(addr + SUNXI_MUSB_POWER); ++ case MUSB_INTRUSB: ++ return readb(addr + SUNXI_MUSB_INTRUSB); ++ case MUSB_INTRUSBE: ++ return readb(addr + SUNXI_MUSB_INTRUSBE); ++ case MUSB_INDEX: ++ return readb(addr + SUNXI_MUSB_INDEX); ++ case MUSB_TESTMODE: ++ return 0; /* No testmode on sunxi */ ++ case MUSB_DEVCTL: ++ return readb(addr + SUNXI_MUSB_DEVCTL); ++ case MUSB_TXFIFOSZ: ++ return readb(addr + SUNXI_MUSB_TXFIFOSZ); ++ case MUSB_RXFIFOSZ: ++ return readb(addr + SUNXI_MUSB_RXFIFOSZ); ++ case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ ++ return readb(addr + SUNXI_MUSB_CONFIGDATA); ++ /* Offset for these is fixed by sunxi_musb_busctl_offset() */ ++ case SUNXI_MUSB_TXFUNCADDR: ++ case SUNXI_MUSB_TXHUBADDR: ++ case SUNXI_MUSB_TXHUBPORT: ++ case SUNXI_MUSB_RXFUNCADDR: ++ case SUNXI_MUSB_RXHUBADDR: ++ case SUNXI_MUSB_RXHUBPORT: ++ /* multipoint / busctl reg access */ ++ return readb(addr + offset); ++ default: ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown readb offset %u\n", offset); ++ return 0; ++ } ++ } else if (addr == (sunxi_musb->mregs + 0x80)) { ++ /* ep control reg access */ ++ /* sunxi has a 2 byte hole before the txtype register */ ++ if (offset >= MUSB_TXTYPE) ++ offset += 2; ++ return readb(addr + offset); ++ } ++ ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown readb at 0x%x bytes offset\n", ++ (int)(addr - sunxi_musb->mregs)); ++ return 0; ++} ++ ++static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) ++{ ++ if (addr == sunxi_musb->mregs) { ++ /* generic control or fifo control reg access */ ++ switch (offset) { ++ case MUSB_FADDR: ++ return writeb(data, addr + SUNXI_MUSB_FADDR); ++ case MUSB_POWER: ++ return writeb(data, addr + SUNXI_MUSB_POWER); ++ case MUSB_INTRUSB: ++ return writeb(data, addr + SUNXI_MUSB_INTRUSB); ++ case MUSB_INTRUSBE: ++ return writeb(data, addr + SUNXI_MUSB_INTRUSBE); ++ case MUSB_INDEX: ++ return writeb(data, addr + SUNXI_MUSB_INDEX); ++ case MUSB_TESTMODE: ++ if (data) ++ dev_warn(sunxi_musb->controller->parent, ++ "sunxi-musb does not have testmode\n"); ++ return; ++ case MUSB_DEVCTL: ++ return writeb(data, addr + SUNXI_MUSB_DEVCTL); ++ case MUSB_TXFIFOSZ: ++ return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); ++ case MUSB_RXFIFOSZ: ++ return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); ++ /* Offset for these is fixed by sunxi_musb_busctl_offset() */ ++ case SUNXI_MUSB_TXFUNCADDR: ++ case SUNXI_MUSB_TXHUBADDR: ++ case SUNXI_MUSB_TXHUBPORT: ++ case SUNXI_MUSB_RXFUNCADDR: ++ case SUNXI_MUSB_RXHUBADDR: ++ case SUNXI_MUSB_RXHUBPORT: ++ /* multipoint / busctl reg access */ ++ return writeb(data, addr + offset); ++ default: ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown writeb offset %u\n", offset); ++ return; ++ } ++ } else if (addr == (sunxi_musb->mregs + 0x80)) { ++ /* ep control reg access */ ++ if (offset >= MUSB_TXTYPE) ++ offset += 2; ++ return writeb(data, addr + offset); ++ } ++ ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown writeb at 0x%x bytes offset\n", ++ (int)(addr - sunxi_musb->mregs)); ++} ++ ++static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset) ++{ ++ if (addr == sunxi_musb->mregs) { ++ /* generic control or fifo control reg access */ ++ switch (offset) { ++ case MUSB_INTRTX: ++ return readw(addr + SUNXI_MUSB_INTRTX); ++ case MUSB_INTRRX: ++ return readw(addr + SUNXI_MUSB_INTRRX); ++ case MUSB_INTRTXE: ++ return readw(addr + SUNXI_MUSB_INTRTXE); ++ case MUSB_INTRRXE: ++ return readw(addr + SUNXI_MUSB_INTRRXE); ++ case MUSB_FRAME: ++ return readw(addr + SUNXI_MUSB_FRAME); ++ case MUSB_TXFIFOADD: ++ return readw(addr + SUNXI_MUSB_TXFIFOADD); ++ case MUSB_RXFIFOADD: ++ return readw(addr + SUNXI_MUSB_RXFIFOADD); ++ case MUSB_HWVERS: ++ return 0; /* sunxi musb version is not known */ ++ default: ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown readw offset %u\n", offset); ++ return 0; ++ } ++ } else if (addr == (sunxi_musb->mregs + 0x80)) { ++ /* ep control reg access */ ++ return readw(addr + offset); ++ } ++ ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown readw at 0x%x bytes offset\n", ++ (int)(addr - sunxi_musb->mregs)); ++ return 0; ++} ++ ++static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) ++{ ++ if (addr == sunxi_musb->mregs) { ++ /* generic control or fifo control reg access */ ++ switch (offset) { ++ case MUSB_INTRTX: ++ return writew(data, addr + SUNXI_MUSB_INTRTX); ++ case MUSB_INTRRX: ++ return writew(data, addr + SUNXI_MUSB_INTRRX); ++ case MUSB_INTRTXE: ++ return writew(data, addr + SUNXI_MUSB_INTRTXE); ++ case MUSB_INTRRXE: ++ return writew(data, addr + SUNXI_MUSB_INTRRXE); ++ case MUSB_FRAME: ++ return writew(data, addr + SUNXI_MUSB_FRAME); ++ case MUSB_TXFIFOADD: ++ return writew(data, addr + SUNXI_MUSB_TXFIFOADD); ++ case MUSB_RXFIFOADD: ++ return writew(data, addr + SUNXI_MUSB_RXFIFOADD); ++ default: ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown writew offset %u\n", offset); ++ return; ++ } ++ } else if (addr == (sunxi_musb->mregs + 0x80)) { ++ /* ep control reg access */ ++ return writew(data, addr + offset); ++ } ++ ++ dev_err(sunxi_musb->controller->parent, ++ "Error unknown writew at 0x%x bytes offset\n", ++ (int)(addr - sunxi_musb->mregs)); ++} ++ ++static const struct musb_platform_ops sunxi_musb_ops = { ++ .quirks = MUSB_INDEXED_EP, ++ .init = sunxi_musb_init, ++ .exit = sunxi_musb_exit, ++ .enable = sunxi_musb_enable, ++ .disable = sunxi_musb_disable, ++ .fifo_offset = sunxi_musb_fifo_offset, ++ .ep_offset = sunxi_musb_ep_offset, ++ .busctl_offset = sunxi_musb_busctl_offset, ++ .readb = sunxi_musb_readb, ++ .writeb = sunxi_musb_writeb, ++ .readw = sunxi_musb_readw, ++ .writew = sunxi_musb_writew, ++ .set_vbus = sunxi_musb_set_vbus, ++ .pre_root_reset_end = sunxi_musb_pre_root_reset_end, ++ .post_root_reset_end = sunxi_musb_post_root_reset_end, ++}; ++ ++/* Allwinner OTG supports up to 5 endpoints */ ++#define SUNXI_MUSB_MAX_EP_NUM 6 ++#define SUNXI_MUSB_RAM_BITS 11 ++ ++static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { ++ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), ++ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), ++ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), ++ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), ++ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), ++ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), ++ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), ++ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), ++ MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), ++ MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), ++}; ++ ++static struct musb_hdrc_config sunxi_musb_hdrc_config = { ++ .fifo_cfg = sunxi_musb_mode_cfg, ++ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), ++ .multipoint = true, ++ .dyn_fifo = true, ++ .soft_con = true, ++ .num_eps = SUNXI_MUSB_MAX_EP_NUM, ++ .ram_bits = SUNXI_MUSB_RAM_BITS, ++ .dma = 0, ++}; ++ ++static int sunxi_musb_probe(struct platform_device *pdev) ++{ ++ struct musb_hdrc_platform_data pdata; ++ struct platform_device_info pinfo; ++ struct sunxi_glue *glue; ++ struct device_node *np = pdev->dev.of_node; ++ int ret; ++ ++ if (!np) { ++ dev_err(&pdev->dev, "Error no device tree node found\n"); ++ return -EINVAL; ++ } ++ ++ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); ++ if (!glue) ++ return -ENOMEM; ++ ++ memset(&pdata, 0, sizeof(pdata)); ++ switch (of_usb_get_dr_mode(np)) { ++#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST ++ case USB_DR_MODE_HOST: ++ pdata.mode = MUSB_PORT_MODE_HOST; ++ break; ++#endif ++#ifdef CONFIG_USB_MUSB_DUAL_ROLE ++ case USB_DR_MODE_OTG: ++ glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); ++ if (IS_ERR(glue->extcon)) { ++ if (PTR_ERR(glue->extcon) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ dev_err(&pdev->dev, "Invalid or missing extcon\n"); ++ return PTR_ERR(glue->extcon); ++ } ++ pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; ++ break; ++#endif ++ default: ++ dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); ++ return -EINVAL; ++ } ++ pdata.platform_ops = &sunxi_musb_ops; ++ pdata.config = &sunxi_musb_hdrc_config; ++ ++ glue->dev = &pdev->dev; ++ INIT_WORK(&glue->work, sunxi_musb_work); ++ glue->host_nb.notifier_call = sunxi_musb_host_notifier; ++ ++ glue->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(glue->clk)) { ++ dev_err(&pdev->dev, "Error getting clock: %ld\n", ++ PTR_ERR(glue->clk)); ++ return PTR_ERR(glue->clk); ++ } ++ ++ glue->phy = devm_phy_get(&pdev->dev, "usb"); ++ if (IS_ERR(glue->phy)) { ++ if (PTR_ERR(glue->phy) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ dev_err(&pdev->dev, "Error getting phy %ld\n", ++ PTR_ERR(glue->phy)); ++ return PTR_ERR(glue->phy); ++ } ++ ++ glue->usb_phy = usb_phy_generic_register(); ++ if (IS_ERR(glue->usb_phy)) { ++ dev_err(&pdev->dev, "Error registering usb-phy %ld\n", ++ PTR_ERR(glue->usb_phy)); ++ return PTR_ERR(glue->usb_phy); ++ } ++ ++ glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); ++ if (IS_ERR(glue->xceiv)) { ++ ret = PTR_ERR(glue->xceiv); ++ dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); ++ goto err_unregister_usb_phy; ++ } ++ ++ platform_set_drvdata(pdev, glue); ++ ++ memset(&pinfo, 0, sizeof(pinfo)); ++ pinfo.name = "musb-hdrc"; ++ pinfo.id = PLATFORM_DEVID_AUTO; ++ pinfo.parent = &pdev->dev; ++ pinfo.res = pdev->resource; ++ pinfo.num_res = pdev->num_resources; ++ pinfo.data = &pdata; ++ pinfo.size_data = sizeof(pdata); ++ ++ glue->musb = platform_device_register_full(&pinfo); ++ if (IS_ERR(glue->musb)) { ++ ret = PTR_ERR(glue->musb); ++ dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); ++ goto err_unregister_usb_phy; ++ } ++ ++ return 0; ++ ++err_unregister_usb_phy: ++ usb_phy_generic_unregister(glue->usb_phy); ++ return ret; ++} ++ ++static int sunxi_musb_remove(struct platform_device *pdev) ++{ ++ struct sunxi_glue *glue = platform_get_drvdata(pdev); ++ struct platform_device *usb_phy = glue->usb_phy; ++ ++ platform_device_unregister(glue->musb); /* Frees glue ! */ ++ usb_phy_generic_unregister(usb_phy); ++ ++ return 0; ++} ++ ++static const struct of_device_id sunxi_musb_match[] = { ++ { .compatible = "allwinner,sun4i-a10-musb", }, ++ {} ++}; ++ ++static struct platform_driver sunxi_musb_driver = { ++ .probe = sunxi_musb_probe, ++ .remove = sunxi_musb_remove, ++ .driver = { ++ .name = "musb-sunxi", ++ .of_match_table = sunxi_musb_match, ++ }, ++}; ++module_platform_driver(sunxi_musb_driver); ++ ++MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); ++MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch b/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch new file mode 100644 index 0000000000..374dbc4ddb --- /dev/null +++ b/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch @@ -0,0 +1,166 @@ +From 132e23775779cc895c37f7883c33a60a1a8a7cdd Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Wed, 8 Jul 2015 16:41:39 +0200 +Subject: [PATCH] usb: musb: sunxi: Add support for musb controller in A31 SoC + +The A31 SoC uses the same musb controller as found in earlier SoCs, but it +is hooked up slightly different. Its SRAM is private and no longer controlled +through the SRAM controller, and its reset is controlled via a separate +reset controller. This commit adds support for this setup. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +Signed-off-by: Felipe Balbi <balbi@ti.com> +--- + .../bindings/usb/allwinner,sun4i-a10-musb.txt | 3 +- + drivers/usb/musb/sunxi.c | 50 +++++++++++++++++++--- + 2 files changed, 46 insertions(+), 7 deletions(-) + +diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +index 9254a6c..fde180b 100644 +--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt ++++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +@@ -2,9 +2,10 @@ Allwinner sun4i A10 musb DRC/OTG controller + ------------------------------------------- + + Required properties: +- - compatible : "allwinner,sun4i-a10-musb" ++ - compatible : "allwinner,sun4i-a10-musb" or "allwinner,sun6i-a31-musb" + - reg : mmio address range of the musb controller + - clocks : clock specifier for the musb controller ahb gate clock ++ - reset : reset specifier for the ahb reset (A31 and newer only) + - interrupts : interrupt to which the musb controller is connected + - interrupt-names : must be "mc" + - phys : phy specifier for the otg phy +diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c +index 00d7248..df2f75e 100644 +--- a/drivers/usb/musb/sunxi.c ++++ b/drivers/usb/musb/sunxi.c +@@ -26,6 +26,7 @@ + #include <linux/of.h> + #include <linux/phy/phy-sun4i-usb.h> + #include <linux/platform_device.h> ++#include <linux/reset.h> + #include <linux/soc/sunxi/sunxi_sram.h> + #include <linux/usb/musb.h> + #include <linux/usb/of.h> +@@ -70,6 +71,8 @@ + #define SUNXI_MUSB_FL_HOSTMODE_PEND 2 + #define SUNXI_MUSB_FL_VBUS_ON 3 + #define SUNXI_MUSB_FL_PHY_ON 4 ++#define SUNXI_MUSB_FL_HAS_SRAM 5 ++#define SUNXI_MUSB_FL_HAS_RESET 6 + + /* Our read/write methods need access and do not get passed in a musb ref :| */ + static struct musb *sunxi_musb; +@@ -78,6 +81,7 @@ struct sunxi_glue { + struct device *dev; + struct platform_device *musb; + struct clk *clk; ++ struct reset_control *rst; + struct phy *phy; + struct platform_device *usb_phy; + struct usb_phy *xceiv; +@@ -229,14 +233,22 @@ static int sunxi_musb_init(struct musb *musb) + musb->phy = glue->phy; + musb->xceiv = glue->xceiv; + +- ret = sunxi_sram_claim(musb->controller->parent); +- if (ret) +- return ret; ++ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { ++ ret = sunxi_sram_claim(musb->controller->parent); ++ if (ret) ++ return ret; ++ } + + ret = clk_prepare_enable(glue->clk); + if (ret) + goto error_sram_release; + ++ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { ++ ret = reset_control_deassert(glue->rst); ++ if (ret) ++ goto error_clk_disable; ++ } ++ + writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); + + /* Register notifier before calling phy_init() */ +@@ -244,7 +256,7 @@ static int sunxi_musb_init(struct musb *musb) + ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, + &glue->host_nb); + if (ret) +- goto error_clk_disable; ++ goto error_reset_assert; + } + + ret = phy_init(glue->phy); +@@ -273,10 +285,14 @@ static int sunxi_musb_init(struct musb *musb) + if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, + &glue->host_nb); ++error_reset_assert: ++ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) ++ reset_control_assert(glue->rst); + error_clk_disable: + clk_disable_unprepare(glue->clk); + error_sram_release: +- sunxi_sram_release(musb->controller->parent); ++ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) ++ sunxi_sram_release(musb->controller->parent); + return ret; + } + +@@ -296,8 +312,12 @@ static int sunxi_musb_exit(struct musb *musb) + extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, + &glue->host_nb); + ++ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) ++ reset_control_assert(glue->rst); ++ + clk_disable_unprepare(glue->clk); +- sunxi_sram_release(musb->controller->parent); ++ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) ++ sunxi_sram_release(musb->controller->parent); + + return 0; + } +@@ -617,6 +637,12 @@ static int sunxi_musb_probe(struct platform_device *pdev) + INIT_WORK(&glue->work, sunxi_musb_work); + glue->host_nb.notifier_call = sunxi_musb_host_notifier; + ++ if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb")) ++ set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); ++ ++ if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) ++ set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); ++ + glue->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(glue->clk)) { + dev_err(&pdev->dev, "Error getting clock: %ld\n", +@@ -624,6 +650,17 @@ static int sunxi_musb_probe(struct platform_device *pdev) + return PTR_ERR(glue->clk); + } + ++ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { ++ glue->rst = devm_reset_control_get(&pdev->dev, NULL); ++ if (IS_ERR(glue->rst)) { ++ if (PTR_ERR(glue->rst) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ dev_err(&pdev->dev, "Error getting reset %ld\n", ++ PTR_ERR(glue->rst)); ++ return PTR_ERR(glue->rst); ++ } ++ } ++ + glue->phy = devm_phy_get(&pdev->dev, "usb"); + if (IS_ERR(glue->phy)) { + if (PTR_ERR(glue->phy) == -EPROBE_DEFER) +@@ -685,6 +722,7 @@ static int sunxi_musb_remove(struct platform_device *pdev) + + static const struct of_device_id sunxi_musb_match[] = { + { .compatible = "allwinner,sun4i-a10-musb", }, ++ { .compatible = "allwinner,sun6i-a31-musb", }, + {} + }; + diff --git a/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch b/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch new file mode 100644 index 0000000000..8a6ac4877c --- /dev/null +++ b/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch @@ -0,0 +1,19 @@ +Index: linux-4.1.3/arch/arm/boot/dts/sun7i-a20.dtsi +=================================================================== +--- linux-4.1.3.orig/arch/arm/boot/dts/sun7i-a20.dtsi ++++ linux-4.1.3/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -679,6 +679,14 @@ + status = "disabled"; + }; + ++ crypto: crypto-engine@01c15000 { ++ compatible = "allwinner,sun7i-a20-crypto"; ++ reg = <0x01c15000 0x1000>; ++ interrupts = <0 86 4>; ++ clocks = <&ahb_gates 5>, <&ss_clk>; ++ clock-names = "ahb", "mod"; ++ }; ++ + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch b/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch new file mode 100644 index 0000000000..5478e64fc3 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch @@ -0,0 +1,36 @@ +From 56ba8c5814a859dd94667643a3bc22984efd1521 Mon Sep 17 00:00:00 2001 +From: LABBE Corentin <clabbe.montjoie@gmail.com> +Date: Fri, 17 Jul 2015 16:39:38 +0200 +Subject: [PATCH] ARM: sun4i: dt: Add Security System to A10 SoC DTS + +The Security System is a hardware cryptographic accelerator that support +AES/MD5/SHA1/DES/3DES/PRNG algorithms. +It could be found on many Allwinner SoC. + +This patch enable the Security System on the Allwinner A10 SoC Device-tree. + +Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index 61c03d1..551e3d1 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -643,6 +643,14 @@ + status = "disabled"; + }; + ++ crypto: crypto-engine@01c15000 { ++ compatible = "allwinner,sun4i-a10-crypto"; ++ reg = <0x01c15000 0x1000>; ++ interrupts = <86>; ++ clocks = <&ahb_gates 5>, <&ss_clk>; ++ clock-names = "ahb", "mod"; ++ }; ++ + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch b/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch new file mode 100644 index 0000000000..de5be3ddac --- /dev/null +++ b/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch @@ -0,0 +1,1732 @@ +From 6298e948215f2a3eb8a9af5c490d025deb66f179 Mon Sep 17 00:00:00 2001 +From: LABBE Corentin <clabbe.montjoie@gmail.com> +Date: Fri, 17 Jul 2015 16:39:41 +0200 +Subject: [PATCH] crypto: sunxi-ss - Add Allwinner Security System crypto + accelerator + +Add support for the Security System included in Allwinner SoC A20. +The Security System is a hardware cryptographic accelerator that support: +- MD5 and SHA1 hash algorithms +- AES block cipher in CBC/ECB mode with 128/196/256bits keys. +- DES and 3DES block cipher in CBC/ECB mode + +Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/Kconfig | 17 + + drivers/crypto/Makefile | 1 + + drivers/crypto/sunxi-ss/Makefile | 2 + + drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 542 ++++++++++++++++++++++++++++++ + drivers/crypto/sunxi-ss/sun4i-ss-core.c | 403 ++++++++++++++++++++++ + drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 492 +++++++++++++++++++++++++++ + drivers/crypto/sunxi-ss/sun4i-ss.h | 199 +++++++++++ + 7 files changed, 1656 insertions(+) + create mode 100644 drivers/crypto/sunxi-ss/Makefile + create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c + create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-core.c + create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-hash.c + create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss.h + +diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig +index 4044125..07bc7aa 100644 +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -480,4 +480,21 @@ config CRYPTO_DEV_IMGTEC_HASH + hardware hash accelerator. Supporting MD5/SHA1/SHA224/SHA256 + hashing algorithms. + ++config CRYPTO_DEV_SUN4I_SS ++ tristate "Support for Allwinner Security System cryptographic accelerator" ++ depends on ARCH_SUNXI ++ select CRYPTO_MD5 ++ select CRYPTO_SHA1 ++ select CRYPTO_AES ++ select CRYPTO_DES ++ select CRYPTO_BLKCIPHER ++ help ++ Some Allwinner SoC have a crypto accelerator named ++ Security System. Select this if you want to use it. ++ The Security System handle AES/DES/3DES ciphers in CBC mode ++ and SHA1 and MD5 hash algorithms. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sun4i-ss. ++ + endif # CRYPTO_HW +diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile +index e35c07a..c3ced6f 100644 +--- a/drivers/crypto/Makefile ++++ b/drivers/crypto/Makefile +@@ -28,3 +28,4 @@ obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/ + obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/ + obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/ + obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ ++obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ +diff --git a/drivers/crypto/sunxi-ss/Makefile b/drivers/crypto/sunxi-ss/Makefile +new file mode 100644 +index 0000000..8f4c7a2 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sun4i-ss.o ++sun4i-ss-y += sun4i-ss-core.o sun4i-ss-hash.o sun4i-ss-cipher.o +diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c +new file mode 100644 +index 0000000..e070c31 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c +@@ -0,0 +1,542 @@ ++/* ++ * sun4i-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> ++ * ++ * This file add support for AES cipher with 128,192,256 bits ++ * keysize in CBC and ECB mode. ++ * Add support also for DES and 3DES in CBC and ECB mode. ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include "sun4i-ss.h" ++ ++static int sun4i_ss_opti_poll(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_ss_ctx *ss = op->ss; ++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); ++ struct sun4i_cipher_req_ctx *ctx = ablkcipher_request_ctx(areq); ++ u32 mode = ctx->mode; ++ /* when activating SS, the default FIFO space is SS_RX_DEFAULT(32) */ ++ u32 rx_cnt = SS_RX_DEFAULT; ++ u32 tx_cnt = 0; ++ u32 spaces; ++ u32 v; ++ int i, err = 0; ++ unsigned int ileft = areq->nbytes; ++ unsigned int oleft = areq->nbytes; ++ unsigned int todo; ++ struct sg_mapping_iter mi, mo; ++ unsigned int oi, oo; /* offset for in and out */ ++ ++ if (areq->nbytes == 0) ++ return 0; ++ ++ if (!areq->info) { ++ dev_err_ratelimited(ss->dev, "ERROR: Empty IV\n"); ++ return -EINVAL; ++ } ++ ++ if (!areq->src || !areq->dst) { ++ dev_err_ratelimited(ss->dev, "ERROR: Some SGs are NULL\n"); ++ return -EINVAL; ++ } ++ ++ spin_lock_bh(&ss->slock); ++ ++ for (i = 0; i < op->keylen; i += 4) ++ writel(*(op->key + i / 4), ss->base + SS_KEY0 + i); ++ ++ if (areq->info) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = *(u32 *)(areq->info + i * 4); ++ writel(v, ss->base + SS_IV0 + i * 4); ++ } ++ } ++ writel(mode, ss->base + SS_CTL); ++ ++ sg_miter_start(&mi, areq->src, sg_nents(areq->src), ++ SG_MITER_FROM_SG | SG_MITER_ATOMIC); ++ sg_miter_start(&mo, areq->dst, sg_nents(areq->dst), ++ SG_MITER_TO_SG | SG_MITER_ATOMIC); ++ sg_miter_next(&mi); ++ sg_miter_next(&mo); ++ if (!mi.addr || !mo.addr) { ++ dev_err_ratelimited(ss->dev, "ERROR: sg_miter return null\n"); ++ err = -EINVAL; ++ goto release_ss; ++ } ++ ++ ileft = areq->nbytes / 4; ++ oleft = areq->nbytes / 4; ++ oi = 0; ++ oo = 0; ++ do { ++ todo = min3(rx_cnt, ileft, (mi.length - oi) / 4); ++ if (todo > 0) { ++ ileft -= todo; ++ writesl(ss->base + SS_RXFIFO, mi.addr + oi, todo); ++ oi += todo * 4; ++ } ++ if (oi == mi.length) { ++ sg_miter_next(&mi); ++ oi = 0; ++ } ++ ++ spaces = readl(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ tx_cnt = SS_TXFIFO_SPACES(spaces); ++ ++ todo = min3(tx_cnt, oleft, (mo.length - oo) / 4); ++ if (todo > 0) { ++ oleft -= todo; ++ readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo); ++ oo += todo * 4; ++ } ++ if (oo == mo.length) { ++ sg_miter_next(&mo); ++ oo = 0; ++ } ++ } while (mo.length > 0); ++ ++ if (areq->info) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = readl(ss->base + SS_IV0 + i * 4); ++ *(u32 *)(areq->info + i * 4) = v; ++ } ++ } ++ ++release_ss: ++ sg_miter_stop(&mi); ++ sg_miter_stop(&mo); ++ writel(0, ss->base + SS_CTL); ++ spin_unlock_bh(&ss->slock); ++ return err; ++} ++ ++/* Generic function that support SG with size not multiple of 4 */ ++static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_ss_ctx *ss = op->ss; ++ int no_chunk = 1; ++ struct scatterlist *in_sg = areq->src; ++ struct scatterlist *out_sg = areq->dst; ++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); ++ struct sun4i_cipher_req_ctx *ctx = ablkcipher_request_ctx(areq); ++ u32 mode = ctx->mode; ++ /* when activating SS, the default FIFO space is SS_RX_DEFAULT(32) */ ++ u32 rx_cnt = SS_RX_DEFAULT; ++ u32 tx_cnt = 0; ++ u32 v; ++ u32 spaces; ++ int i, err = 0; ++ unsigned int ileft = areq->nbytes; ++ unsigned int oleft = areq->nbytes; ++ unsigned int todo; ++ struct sg_mapping_iter mi, mo; ++ unsigned int oi, oo; /* offset for in and out */ ++ char buf[4 * SS_RX_MAX];/* buffer for linearize SG src */ ++ char bufo[4 * SS_TX_MAX]; /* buffer for linearize SG dst */ ++ unsigned int ob = 0; /* offset in buf */ ++ unsigned int obo = 0; /* offset in bufo*/ ++ unsigned int obl = 0; /* length of data in bufo */ ++ ++ if (areq->nbytes == 0) ++ return 0; ++ ++ if (!areq->info) { ++ dev_err_ratelimited(ss->dev, "ERROR: Empty IV\n"); ++ return -EINVAL; ++ } ++ ++ if (!areq->src || !areq->dst) { ++ dev_err_ratelimited(ss->dev, "ERROR: Some SGs are NULL\n"); ++ return -EINVAL; ++ } ++ ++ /* ++ * if we have only SGs with size multiple of 4, ++ * we can use the SS optimized function ++ */ ++ while (in_sg && no_chunk == 1) { ++ if ((in_sg->length % 4) != 0) ++ no_chunk = 0; ++ in_sg = sg_next(in_sg); ++ } ++ while (out_sg && no_chunk == 1) { ++ if ((out_sg->length % 4) != 0) ++ no_chunk = 0; ++ out_sg = sg_next(out_sg); ++ } ++ ++ if (no_chunk == 1) ++ return sun4i_ss_opti_poll(areq); ++ ++ spin_lock_bh(&ss->slock); ++ ++ for (i = 0; i < op->keylen; i += 4) ++ writel(*(op->key + i / 4), ss->base + SS_KEY0 + i); ++ ++ if (areq->info) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = *(u32 *)(areq->info + i * 4); ++ writel(v, ss->base + SS_IV0 + i * 4); ++ } ++ } ++ writel(mode, ss->base + SS_CTL); ++ ++ sg_miter_start(&mi, areq->src, sg_nents(areq->src), ++ SG_MITER_FROM_SG | SG_MITER_ATOMIC); ++ sg_miter_start(&mo, areq->dst, sg_nents(areq->dst), ++ SG_MITER_TO_SG | SG_MITER_ATOMIC); ++ sg_miter_next(&mi); ++ sg_miter_next(&mo); ++ if (!mi.addr || !mo.addr) { ++ dev_err_ratelimited(ss->dev, "ERROR: sg_miter return null\n"); ++ err = -EINVAL; ++ goto release_ss; ++ } ++ ileft = areq->nbytes; ++ oleft = areq->nbytes; ++ oi = 0; ++ oo = 0; ++ ++ while (oleft > 0) { ++ if (ileft > 0) { ++ /* ++ * todo is the number of consecutive 4byte word that we ++ * can read from current SG ++ */ ++ todo = min3(rx_cnt, ileft / 4, (mi.length - oi) / 4); ++ if (todo > 0 && ob == 0) { ++ writesl(ss->base + SS_RXFIFO, mi.addr + oi, ++ todo); ++ ileft -= todo * 4; ++ oi += todo * 4; ++ } else { ++ /* ++ * not enough consecutive bytes, so we need to ++ * linearize in buf. todo is in bytes ++ * After that copy, if we have a multiple of 4 ++ * we need to be able to write all buf in one ++ * pass, so it is why we min() with rx_cnt ++ */ ++ todo = min3(rx_cnt * 4 - ob, ileft, ++ mi.length - oi); ++ memcpy(buf + ob, mi.addr + oi, todo); ++ ileft -= todo; ++ oi += todo; ++ ob += todo; ++ if (ob % 4 == 0) { ++ writesl(ss->base + SS_RXFIFO, buf, ++ ob / 4); ++ ob = 0; ++ } ++ } ++ if (oi == mi.length) { ++ sg_miter_next(&mi); ++ oi = 0; ++ } ++ } ++ ++ spaces = readl(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ tx_cnt = SS_TXFIFO_SPACES(spaces); ++ dev_dbg(ss->dev, "%x %u/%u %u/%u cnt=%u %u/%u %u/%u cnt=%u %u %u\n", ++ mode, ++ oi, mi.length, ileft, areq->nbytes, rx_cnt, ++ oo, mo.length, oleft, areq->nbytes, tx_cnt, ++ todo, ob); ++ ++ if (tx_cnt == 0) ++ continue; ++ /* todo in 4bytes word */ ++ todo = min3(tx_cnt, oleft / 4, (mo.length - oo) / 4); ++ if (todo > 0) { ++ readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo); ++ oleft -= todo * 4; ++ oo += todo * 4; ++ if (oo == mo.length) { ++ sg_miter_next(&mo); ++ oo = 0; ++ } ++ } else { ++ /* ++ * read obl bytes in bufo, we read at maximum for ++ * emptying the device ++ */ ++ readsl(ss->base + SS_TXFIFO, bufo, tx_cnt); ++ obl = tx_cnt * 4; ++ obo = 0; ++ do { ++ /* ++ * how many bytes we can copy ? ++ * no more than remaining SG size ++ * no more than remaining buffer ++ * no need to test against oleft ++ */ ++ todo = min(mo.length - oo, obl - obo); ++ memcpy(mo.addr + oo, bufo + obo, todo); ++ oleft -= todo; ++ obo += todo; ++ oo += todo; ++ if (oo == mo.length) { ++ sg_miter_next(&mo); ++ oo = 0; ++ } ++ } while (obo < obl); ++ /* bufo must be fully used here */ ++ } ++ } ++ if (areq->info) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = readl(ss->base + SS_IV0 + i * 4); ++ *(u32 *)(areq->info + i * 4) = v; ++ } ++ } ++ ++release_ss: ++ sg_miter_stop(&mi); ++ sg_miter_stop(&mo); ++ writel(0, ss->base + SS_CTL); ++ spin_unlock_bh(&ss->slock); ++ ++ return err; ++} ++ ++/* CBC AES */ ++int sun4i_ss_cbc_aes_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_cbc_aes_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++/* ECB AES */ ++int sun4i_ss_ecb_aes_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_ecb_aes_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++/* CBC DES */ ++int sun4i_ss_cbc_des_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_cbc_des_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++/* ECB DES */ ++int sun4i_ss_ecb_des_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_ecb_des_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++/* CBC 3DES */ ++int sun4i_ss_cbc_des3_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_cbc_des3_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++/* ECB 3DES */ ++int sun4i_ss_ecb_des3_encrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_ecb_des3_decrypt(struct ablkcipher_request *areq) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); ++ ++ rctx->mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | ++ op->keymode; ++ return sun4i_ss_cipher_poll(areq); ++} ++ ++int sun4i_ss_cipher_init(struct crypto_tfm *tfm) ++{ ++ struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm); ++ struct crypto_alg *alg = tfm->__crt_alg; ++ struct sun4i_ss_alg_template *algt; ++ ++ memset(op, 0, sizeof(struct sun4i_tfm_ctx)); ++ ++ algt = container_of(alg, struct sun4i_ss_alg_template, alg.crypto); ++ op->ss = algt->ss; ++ ++ tfm->crt_ablkcipher.reqsize = sizeof(struct sun4i_cipher_req_ctx); ++ ++ return 0; ++} ++ ++/* check and set the AES key, prepare the mode to be used */ ++int sun4i_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_ss_ctx *ss = op->ss; ++ ++ switch (keylen) { ++ case 128 / 8: ++ op->keymode = SS_AES_128BITS; ++ break; ++ case 192 / 8: ++ op->keymode = SS_AES_192BITS; ++ break; ++ case 256 / 8: ++ op->keymode = SS_AES_256BITS; ++ break; ++ default: ++ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} ++ ++/* check and set the DES key, prepare the mode to be used */ ++int sun4i_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_ss_ctx *ss = op->ss; ++ u32 flags; ++ u32 tmp[DES_EXPKEY_WORDS]; ++ int ret; ++ ++ if (unlikely(keylen != DES_KEY_SIZE)) { ++ dev_err(ss->dev, "Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ ++ flags = crypto_ablkcipher_get_flags(tfm); ++ ++ ret = des_ekey(tmp, key); ++ if (unlikely(ret == 0) && (flags & CRYPTO_TFM_REQ_WEAK_KEY)) { ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_WEAK_KEY); ++ dev_dbg(ss->dev, "Weak key %u\n", keylen); ++ return -EINVAL; ++ } ++ ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} ++ ++/* check and set the 3DES key, prepare the mode to be used */ ++int sun4i_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ struct sun4i_ss_ctx *ss = op->ss; ++ ++ if (unlikely(keylen != 3 * DES_KEY_SIZE)) { ++ dev_err(ss->dev, "Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} +diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c +new file mode 100644 +index 0000000..0b79b58 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c +@@ -0,0 +1,403 @@ ++/* ++ * sun4i-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> ++ * ++ * Core file which registers crypto algorithms supported by the SS. ++ * ++ * You could find a link for the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include <linux/clk.h> ++#include <linux/crypto.h> ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <crypto/scatterwalk.h> ++#include <linux/scatterlist.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++ ++#include "sun4i-ss.h" ++ ++static struct sun4i_ss_alg_template ss_algs[] = { ++{ .type = CRYPTO_ALG_TYPE_AHASH, ++ .mode = SS_OP_MD5, ++ .alg.hash = { ++ .init = sun4i_hash_init, ++ .update = sun4i_hash_update, ++ .final = sun4i_hash_final, ++ .finup = sun4i_hash_finup, ++ .digest = sun4i_hash_digest, ++ .export = sun4i_hash_export_md5, ++ .import = sun4i_hash_import_md5, ++ .halg = { ++ .digestsize = MD5_DIGEST_SIZE, ++ .base = { ++ .cra_name = "md5", ++ .cra_driver_name = "md5-sun4i-ss", ++ .cra_priority = 300, ++ .cra_alignmask = 3, ++ .cra_flags = CRYPTO_ALG_TYPE_AHASH, ++ .cra_blocksize = MD5_HMAC_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_type = &crypto_ahash_type, ++ .cra_init = sun4i_hash_crainit ++ } ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_AHASH, ++ .mode = SS_OP_SHA1, ++ .alg.hash = { ++ .init = sun4i_hash_init, ++ .update = sun4i_hash_update, ++ .final = sun4i_hash_final, ++ .finup = sun4i_hash_finup, ++ .digest = sun4i_hash_digest, ++ .export = sun4i_hash_export_sha1, ++ .import = sun4i_hash_import_sha1, ++ .halg = { ++ .digestsize = SHA1_DIGEST_SIZE, ++ .base = { ++ .cra_name = "sha1", ++ .cra_driver_name = "sha1-sun4i-ss", ++ .cra_priority = 300, ++ .cra_alignmask = 3, ++ .cra_flags = CRYPTO_ALG_TYPE_AHASH, ++ .cra_blocksize = SHA1_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_type = &crypto_ahash_type, ++ .cra_init = sun4i_hash_crainit ++ } ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "cbc(aes)", ++ .cra_driver_name = "cbc-aes-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = AES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_ablkcipher = { ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .setkey = sun4i_ss_aes_setkey, ++ .encrypt = sun4i_ss_cbc_aes_encrypt, ++ .decrypt = sun4i_ss_cbc_aes_decrypt, ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "ecb(aes)", ++ .cra_driver_name = "ecb-aes-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = AES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_ablkcipher = { ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .setkey = sun4i_ss_aes_setkey, ++ .encrypt = sun4i_ss_ecb_aes_encrypt, ++ .decrypt = sun4i_ss_ecb_aes_decrypt, ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "cbc(des)", ++ .cra_driver_name = "cbc-des-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ .ivsize = DES_BLOCK_SIZE, ++ .setkey = sun4i_ss_des_setkey, ++ .encrypt = sun4i_ss_cbc_des_encrypt, ++ .decrypt = sun4i_ss_cbc_des_decrypt, ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "ecb(des)", ++ .cra_driver_name = "ecb-des-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ .setkey = sun4i_ss_des_setkey, ++ .encrypt = sun4i_ss_ecb_des_encrypt, ++ .decrypt = sun4i_ss_ecb_des_decrypt, ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "cbc(des3_ede)", ++ .cra_driver_name = "cbc-des3-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES3_EDE_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ .ivsize = DES3_EDE_BLOCK_SIZE, ++ .setkey = sun4i_ss_des3_setkey, ++ .encrypt = sun4i_ss_cbc_des3_encrypt, ++ .decrypt = sun4i_ss_cbc_des3_decrypt, ++ } ++ } ++}, ++{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .alg.crypto = { ++ .cra_name = "ecb(des3_ede)", ++ .cra_driver_name = "ecb-des3-sun4i-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES3_EDE_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sun4i_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sun4i_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ .ivsize = DES3_EDE_BLOCK_SIZE, ++ .setkey = sun4i_ss_des3_setkey, ++ .encrypt = sun4i_ss_ecb_des3_encrypt, ++ .decrypt = sun4i_ss_ecb_des3_decrypt, ++ } ++ } ++}, ++}; ++ ++static int sun4i_ss_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ u32 v; ++ int err, i; ++ unsigned long cr; ++ const unsigned long cr_ahb = 24 * 1000 * 1000; ++ const unsigned long cr_mod = 150 * 1000 * 1000; ++ struct sun4i_ss_ctx *ss; ++ ++ if (!pdev->dev.of_node) ++ return -ENODEV; ++ ++ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL); ++ if (!ss) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ss->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(ss->base)) { ++ dev_err(&pdev->dev, "Cannot request MMIO\n"); ++ return PTR_ERR(ss->base); ++ } ++ ++ ss->ssclk = devm_clk_get(&pdev->dev, "mod"); ++ if (IS_ERR(ss->ssclk)) { ++ err = PTR_ERR(ss->ssclk); ++ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err); ++ return err; ++ } ++ dev_dbg(&pdev->dev, "clock ss acquired\n"); ++ ++ ss->busclk = devm_clk_get(&pdev->dev, "ahb"); ++ if (IS_ERR(ss->busclk)) { ++ err = PTR_ERR(ss->busclk); ++ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err); ++ return err; ++ } ++ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n"); ++ ++ /* Enable both clocks */ ++ err = clk_prepare_enable(ss->busclk); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); ++ return err; ++ } ++ err = clk_prepare_enable(ss->ssclk); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n"); ++ goto error_ssclk; ++ } ++ ++ /* ++ * Check that clock have the correct rates given in the datasheet ++ * Try to set the clock to the maximum allowed ++ */ ++ err = clk_set_rate(ss->ssclk, cr_mod); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n"); ++ goto error_clk; ++ } ++ ++ /* ++ * The only impact on clocks below requirement are bad performance, ++ * so do not print "errors" ++ * warn on Overclocked clocks ++ */ ++ cr = clk_get_rate(ss->busclk); ++ if (cr >= cr_ahb) ++ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", ++ cr, cr / 1000000, cr_ahb); ++ else ++ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", ++ cr, cr / 1000000, cr_ahb); ++ ++ cr = clk_get_rate(ss->ssclk); ++ if (cr <= cr_mod) ++ if (cr < cr_mod) ++ dev_warn(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ else ++ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ else ++ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ ++ /* ++ * Datasheet named it "Die Bonding ID" ++ * I expect to be a sort of Security System Revision number. ++ * Since the A80 seems to have an other version of SS ++ * this info could be useful ++ */ ++ writel(SS_ENABLED, ss->base + SS_CTL); ++ v = readl(ss->base + SS_CTL); ++ v >>= 16; ++ v &= 0x07; ++ dev_info(&pdev->dev, "Die ID %d\n", v); ++ writel(0, ss->base + SS_CTL); ++ ++ ss->dev = &pdev->dev; ++ ++ spin_lock_init(&ss->slock); ++ ++ for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { ++ ss_algs[i].ss = ss; ++ switch (ss_algs[i].type) { ++ case CRYPTO_ALG_TYPE_ABLKCIPHER: ++ err = crypto_register_alg(&ss_algs[i].alg.crypto); ++ if (err != 0) { ++ dev_err(ss->dev, "Fail to register %s\n", ++ ss_algs[i].alg.crypto.cra_name); ++ goto error_alg; ++ } ++ break; ++ case CRYPTO_ALG_TYPE_AHASH: ++ err = crypto_register_ahash(&ss_algs[i].alg.hash); ++ if (err != 0) { ++ dev_err(ss->dev, "Fail to register %s\n", ++ ss_algs[i].alg.hash.halg.base.cra_name); ++ goto error_alg; ++ } ++ break; ++ } ++ } ++ platform_set_drvdata(pdev, ss); ++ return 0; ++error_alg: ++ i--; ++ for (; i >= 0; i--) { ++ switch (ss_algs[i].type) { ++ case CRYPTO_ALG_TYPE_ABLKCIPHER: ++ crypto_unregister_alg(&ss_algs[i].alg.crypto); ++ break; ++ case CRYPTO_ALG_TYPE_AHASH: ++ crypto_unregister_ahash(&ss_algs[i].alg.hash); ++ break; ++ } ++ } ++error_clk: ++ clk_disable_unprepare(ss->ssclk); ++error_ssclk: ++ clk_disable_unprepare(ss->busclk); ++ return err; ++} ++ ++static int sun4i_ss_remove(struct platform_device *pdev) ++{ ++ int i; ++ struct sun4i_ss_ctx *ss = platform_get_drvdata(pdev); ++ ++ for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { ++ switch (ss_algs[i].type) { ++ case CRYPTO_ALG_TYPE_ABLKCIPHER: ++ crypto_unregister_alg(&ss_algs[i].alg.crypto); ++ break; ++ case CRYPTO_ALG_TYPE_AHASH: ++ crypto_unregister_ahash(&ss_algs[i].alg.hash); ++ break; ++ } ++ } ++ ++ writel(0, ss->base + SS_CTL); ++ clk_disable_unprepare(ss->busclk); ++ clk_disable_unprepare(ss->ssclk); ++ return 0; ++} ++ ++static const struct of_device_id a20ss_crypto_of_match_table[] = { ++ { .compatible = "allwinner,sun4i-a10-crypto" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table); ++ ++static struct platform_driver sun4i_ss_driver = { ++ .probe = sun4i_ss_probe, ++ .remove = sun4i_ss_remove, ++ .driver = { ++ .name = "sun4i-ss", ++ .of_match_table = a20ss_crypto_of_match_table, ++ }, ++}; ++ ++module_platform_driver(sun4i_ss_driver); ++ ++MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); +diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c +new file mode 100644 +index 0000000..ff80314 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c +@@ -0,0 +1,492 @@ ++/* ++ * sun4i-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> ++ * ++ * This file add support for MD5 and SHA1. ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include "sun4i-ss.h" ++#include <linux/scatterlist.h> ++ ++/* This is a totally arbitrary value */ ++#define SS_TIMEOUT 100 ++ ++int sun4i_hash_crainit(struct crypto_tfm *tfm) ++{ ++ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), ++ sizeof(struct sun4i_req_ctx)); ++ return 0; ++} ++ ++/* sun4i_hash_init: initialize request context */ ++int sun4i_hash_init(struct ahash_request *areq) ++{ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); ++ struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg); ++ struct sun4i_ss_alg_template *algt; ++ struct sun4i_ss_ctx *ss; ++ ++ memset(op, 0, sizeof(struct sun4i_req_ctx)); ++ ++ algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); ++ ss = algt->ss; ++ op->ss = algt->ss; ++ op->mode = algt->mode; ++ ++ return 0; ++} ++ ++int sun4i_hash_export_md5(struct ahash_request *areq, void *out) ++{ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ struct md5_state *octx = out; ++ int i; ++ ++ octx->byte_count = op->byte_count + op->len; ++ ++ memcpy(octx->block, op->buf, op->len); ++ ++ if (op->byte_count > 0) { ++ for (i = 0; i < 4; i++) ++ octx->hash[i] = op->hash[i]; ++ } else { ++ octx->hash[0] = SHA1_H0; ++ octx->hash[1] = SHA1_H1; ++ octx->hash[2] = SHA1_H2; ++ octx->hash[3] = SHA1_H3; ++ } ++ ++ return 0; ++} ++ ++int sun4i_hash_import_md5(struct ahash_request *areq, const void *in) ++{ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ const struct md5_state *ictx = in; ++ int i; ++ ++ sun4i_hash_init(areq); ++ ++ op->byte_count = ictx->byte_count & ~0x3F; ++ op->len = ictx->byte_count & 0x3F; ++ ++ memcpy(op->buf, ictx->block, op->len); ++ ++ for (i = 0; i < 4; i++) ++ op->hash[i] = ictx->hash[i]; ++ ++ return 0; ++} ++ ++int sun4i_hash_export_sha1(struct ahash_request *areq, void *out) ++{ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ struct sha1_state *octx = out; ++ int i; ++ ++ octx->count = op->byte_count + op->len; ++ ++ memcpy(octx->buffer, op->buf, op->len); ++ ++ if (op->byte_count > 0) { ++ for (i = 0; i < 5; i++) ++ octx->state[i] = op->hash[i]; ++ } else { ++ octx->state[0] = SHA1_H0; ++ octx->state[1] = SHA1_H1; ++ octx->state[2] = SHA1_H2; ++ octx->state[3] = SHA1_H3; ++ octx->state[4] = SHA1_H4; ++ } ++ ++ return 0; ++} ++ ++int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in) ++{ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ const struct sha1_state *ictx = in; ++ int i; ++ ++ sun4i_hash_init(areq); ++ ++ op->byte_count = ictx->count & ~0x3F; ++ op->len = ictx->count & 0x3F; ++ ++ memcpy(op->buf, ictx->buffer, op->len); ++ ++ for (i = 0; i < 5; i++) ++ op->hash[i] = ictx->state[i]; ++ ++ return 0; ++} ++ ++/* ++ * sun4i_hash_update: update hash engine ++ * ++ * Could be used for both SHA1 and MD5 ++ * Write data by step of 32bits and put then in the SS. ++ * ++ * Since we cannot leave partial data and hash state in the engine, ++ * we need to get the hash state at the end of this function. ++ * We can get the hash state every 64 bytes ++ * ++ * So the first work is to get the number of bytes to write to SS modulo 64 ++ * The extra bytes will go to a temporary buffer op->buf storing op->len bytes ++ * ++ * So at the begin of update() ++ * if op->len + areq->nbytes < 64 ++ * => all data will be written to wait buffer (op->buf) and end=0 ++ * if not, write all data from op->buf to the device and position end to ++ * complete to 64bytes ++ * ++ * example 1: ++ * update1 60o => op->len=60 ++ * update2 60o => need one more word to have 64 bytes ++ * end=4 ++ * so write all data from op->buf and one word of SGs ++ * write remaining data in op->buf ++ * final state op->len=56 ++ */ ++int sun4i_hash_update(struct ahash_request *areq) ++{ ++ u32 v, ivmode = 0; ++ unsigned int i = 0; ++ /* ++ * i is the total bytes read from SGs, to be compared to areq->nbytes ++ * i is important because we cannot rely on SG length since the sum of ++ * SG->length could be greater than areq->nbytes ++ */ ++ ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ struct sun4i_ss_ctx *ss = op->ss; ++ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); ++ unsigned int in_i = 0; /* advancement in the current SG */ ++ unsigned int end; ++ /* ++ * end is the position when we need to stop writing to the device, ++ * to be compared to i ++ */ ++ int in_r, err = 0; ++ unsigned int todo; ++ u32 spaces, rx_cnt = SS_RX_DEFAULT; ++ size_t copied = 0; ++ struct sg_mapping_iter mi; ++ ++ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x wl=%u h0=%0x", ++ __func__, crypto_tfm_alg_name(areq->base.tfm), ++ op->byte_count, areq->nbytes, op->mode, ++ op->len, op->hash[0]); ++ ++ if (areq->nbytes == 0) ++ return 0; ++ ++ /* protect against overflow */ ++ if (areq->nbytes > UINT_MAX - op->len) { ++ dev_err(ss->dev, "Cannot process too large request\n"); ++ return -EINVAL; ++ } ++ ++ if (op->len + areq->nbytes < 64) { ++ /* linearize data to op->buf */ ++ copied = sg_pcopy_to_buffer(areq->src, sg_nents(areq->src), ++ op->buf + op->len, areq->nbytes, 0); ++ op->len += copied; ++ return 0; ++ } ++ ++ end = ((areq->nbytes + op->len) / 64) * 64 - op->len; ++ ++ if (end > areq->nbytes || areq->nbytes - end > 63) { ++ dev_err(ss->dev, "ERROR: Bound error %u %u\n", ++ end, areq->nbytes); ++ return -EINVAL; ++ } ++ ++ spin_lock_bh(&ss->slock); ++ ++ /* ++ * if some data have been processed before, ++ * we need to restore the partial hash state ++ */ ++ if (op->byte_count > 0) { ++ ivmode = SS_IV_ARBITRARY; ++ for (i = 0; i < 5; i++) ++ writel(op->hash[i], ss->base + SS_IV0 + i * 4); ++ } ++ /* Enable the device */ ++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); ++ ++ i = 0; ++ sg_miter_start(&mi, areq->src, sg_nents(areq->src), ++ SG_MITER_FROM_SG | SG_MITER_ATOMIC); ++ sg_miter_next(&mi); ++ in_i = 0; ++ ++ do { ++ /* ++ * we need to linearize in two case: ++ * - the buffer is already used ++ * - the SG does not have enough byte remaining ( < 4) ++ */ ++ if (op->len > 0 || (mi.length - in_i) < 4) { ++ /* ++ * if we have entered here we have two reason to stop ++ * - the buffer is full ++ * - reach the end ++ */ ++ while (op->len < 64 && i < end) { ++ /* how many bytes we can read from current SG */ ++ in_r = min3(mi.length - in_i, end - i, ++ 64 - op->len); ++ memcpy(op->buf + op->len, mi.addr + in_i, in_r); ++ op->len += in_r; ++ i += in_r; ++ in_i += in_r; ++ if (in_i == mi.length) { ++ sg_miter_next(&mi); ++ in_i = 0; ++ } ++ } ++ if (op->len > 3 && (op->len % 4) == 0) { ++ /* write buf to the device */ ++ writesl(ss->base + SS_RXFIFO, op->buf, ++ op->len / 4); ++ op->byte_count += op->len; ++ op->len = 0; ++ } ++ } ++ if (mi.length - in_i > 3 && i < end) { ++ /* how many bytes we can read from current SG */ ++ in_r = min3(mi.length - in_i, areq->nbytes - i, ++ ((mi.length - in_i) / 4) * 4); ++ /* how many bytes we can write in the device*/ ++ todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4); ++ writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo); ++ op->byte_count += todo * 4; ++ i += todo * 4; ++ in_i += todo * 4; ++ rx_cnt -= todo; ++ if (rx_cnt == 0) { ++ spaces = readl(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ } ++ if (in_i == mi.length) { ++ sg_miter_next(&mi); ++ in_i = 0; ++ } ++ } ++ } while (i < end); ++ /* final linear */ ++ if ((areq->nbytes - i) < 64) { ++ while (i < areq->nbytes && in_i < mi.length && op->len < 64) { ++ /* how many bytes we can read from current SG */ ++ in_r = min3(mi.length - in_i, areq->nbytes - i, ++ 64 - op->len); ++ memcpy(op->buf + op->len, mi.addr + in_i, in_r); ++ op->len += in_r; ++ i += in_r; ++ in_i += in_r; ++ if (in_i == mi.length) { ++ sg_miter_next(&mi); ++ in_i = 0; ++ } ++ } ++ } ++ ++ sg_miter_stop(&mi); ++ ++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); ++ i = 0; ++ do { ++ v = readl(ss->base + SS_CTL); ++ i++; ++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); ++ if (i >= SS_TIMEOUT) { ++ dev_err_ratelimited(ss->dev, ++ "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", ++ i, SS_TIMEOUT, v, areq->nbytes); ++ err = -EIO; ++ goto release_ss; ++ } ++ ++ /* get the partial hash only if something was written */ ++ for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) ++ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); ++ ++release_ss: ++ writel(0, ss->base + SS_CTL); ++ spin_unlock_bh(&ss->slock); ++ return err; ++} ++ ++/* ++ * sun4i_hash_final: finalize hashing operation ++ * ++ * If we have some remaining bytes, we write them. ++ * Then ask the SS for finalizing the hashing operation ++ * ++ * I do not check RX FIFO size in this function since the size is 32 ++ * after each enabling and this function neither write more than 32 words. ++ */ ++int sun4i_hash_final(struct ahash_request *areq) ++{ ++ u32 v, ivmode = 0; ++ unsigned int i; ++ unsigned int j = 0; ++ int zeros, err = 0; ++ unsigned int index, padlen; ++ __be64 bits; ++ struct sun4i_req_ctx *op = ahash_request_ctx(areq); ++ struct sun4i_ss_ctx *ss = op->ss; ++ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); ++ u32 bf[32]; ++ u32 wb = 0; ++ unsigned int nwait, nbw = 0; ++ ++ dev_dbg(ss->dev, "%s: byte=%llu len=%u mode=%x wl=%u h=%x", ++ __func__, op->byte_count, areq->nbytes, op->mode, ++ op->len, op->hash[0]); ++ ++ spin_lock_bh(&ss->slock); ++ ++ /* ++ * if we have already written something, ++ * restore the partial hash state ++ */ ++ if (op->byte_count > 0) { ++ ivmode = SS_IV_ARBITRARY; ++ for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) ++ writel(op->hash[i], ss->base + SS_IV0 + i * 4); ++ } ++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); ++ ++ /* write the remaining words of the wait buffer */ ++ if (op->len > 0) { ++ nwait = op->len / 4; ++ if (nwait > 0) { ++ writesl(ss->base + SS_RXFIFO, op->buf, nwait); ++ op->byte_count += 4 * nwait; ++ } ++ nbw = op->len - 4 * nwait; ++ wb = *(u32 *)(op->buf + nwait * 4); ++ wb &= (0xFFFFFFFF >> (4 - nbw) * 8); ++ } ++ ++ /* write the remaining bytes of the nbw buffer */ ++ if (nbw > 0) { ++ wb |= ((1 << 7) << (nbw * 8)); ++ bf[j++] = wb; ++ } else { ++ bf[j++] = 1 << 7; ++ } ++ ++ /* ++ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1) ++ * I take the operations from other MD5/SHA1 implementations ++ */ ++ ++ /* we have already send 4 more byte of which nbw data */ ++ if (op->mode == SS_OP_MD5) { ++ index = (op->byte_count + 4) & 0x3f; ++ op->byte_count += nbw; ++ if (index > 56) ++ zeros = (120 - index) / 4; ++ else ++ zeros = (56 - index) / 4; ++ } else { ++ op->byte_count += nbw; ++ index = op->byte_count & 0x3f; ++ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index); ++ zeros = (padlen - 1) / 4; ++ } ++ ++ memset(bf + j, 0, 4 * zeros); ++ j += zeros; ++ ++ /* write the length of data */ ++ if (op->mode == SS_OP_SHA1) { ++ bits = cpu_to_be64(op->byte_count << 3); ++ bf[j++] = bits & 0xffffffff; ++ bf[j++] = (bits >> 32) & 0xffffffff; ++ } else { ++ bf[j++] = (op->byte_count << 3) & 0xffffffff; ++ bf[j++] = (op->byte_count >> 29) & 0xffffffff; ++ } ++ writesl(ss->base + SS_RXFIFO, bf, j); ++ ++ /* Tell the SS to stop the hashing */ ++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); ++ ++ /* ++ * Wait for SS to finish the hash. ++ * The timeout could happen only in case of bad overcloking ++ * or driver bug. ++ */ ++ i = 0; ++ do { ++ v = readl(ss->base + SS_CTL); ++ i++; ++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); ++ if (i >= SS_TIMEOUT) { ++ dev_err_ratelimited(ss->dev, ++ "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", ++ i, SS_TIMEOUT, v, areq->nbytes); ++ err = -EIO; ++ goto release_ss; ++ } ++ ++ /* Get the hash from the device */ ++ if (op->mode == SS_OP_SHA1) { ++ for (i = 0; i < 5; i++) { ++ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4)); ++ memcpy(areq->result + i * 4, &v, 4); ++ } ++ } else { ++ for (i = 0; i < 4; i++) { ++ v = readl(ss->base + SS_MD0 + i * 4); ++ memcpy(areq->result + i * 4, &v, 4); ++ } ++ } ++ ++release_ss: ++ writel(0, ss->base + SS_CTL); ++ spin_unlock_bh(&ss->slock); ++ return err; ++} ++ ++/* sun4i_hash_finup: finalize hashing operation after an update */ ++int sun4i_hash_finup(struct ahash_request *areq) ++{ ++ int err; ++ ++ err = sun4i_hash_update(areq); ++ if (err != 0) ++ return err; ++ ++ return sun4i_hash_final(areq); ++} ++ ++/* combo of init/update/final functions */ ++int sun4i_hash_digest(struct ahash_request *areq) ++{ ++ int err; ++ ++ err = sun4i_hash_init(areq); ++ if (err != 0) ++ return err; ++ ++ err = sun4i_hash_update(areq); ++ if (err != 0) ++ return err; ++ ++ return sun4i_hash_final(areq); ++} +diff --git a/drivers/crypto/sunxi-ss/sun4i-ss.h b/drivers/crypto/sunxi-ss/sun4i-ss.h +new file mode 100644 +index 0000000..db18b255 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sun4i-ss.h +@@ -0,0 +1,199 @@ ++/* ++ * sun4i-ss.h - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> ++ * ++ * Support AES cipher with 128,192,256 bits keysize. ++ * Support MD5 and SHA1 hash algorithms. ++ * Support DES and 3DES ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * Licensed under the GPL-2. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/crypto.h> ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <crypto/scatterwalk.h> ++#include <linux/scatterlist.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <crypto/md5.h> ++#include <crypto/sha.h> ++#include <crypto/hash.h> ++#include <crypto/internal/hash.h> ++#include <crypto/aes.h> ++#include <crypto/des.h> ++#include <crypto/internal/rng.h> ++ ++#define SS_CTL 0x00 ++#define SS_KEY0 0x04 ++#define SS_KEY1 0x08 ++#define SS_KEY2 0x0C ++#define SS_KEY3 0x10 ++#define SS_KEY4 0x14 ++#define SS_KEY5 0x18 ++#define SS_KEY6 0x1C ++#define SS_KEY7 0x20 ++ ++#define SS_IV0 0x24 ++#define SS_IV1 0x28 ++#define SS_IV2 0x2C ++#define SS_IV3 0x30 ++ ++#define SS_FCSR 0x44 ++ ++#define SS_MD0 0x4C ++#define SS_MD1 0x50 ++#define SS_MD2 0x54 ++#define SS_MD3 0x58 ++#define SS_MD4 0x5C ++ ++#define SS_RXFIFO 0x200 ++#define SS_TXFIFO 0x204 ++ ++/* SS_CTL configuration values */ ++ ++/* PRNG generator mode - bit 15 */ ++#define SS_PRNG_ONESHOT (0 << 15) ++#define SS_PRNG_CONTINUE (1 << 15) ++ ++/* IV mode for hash */ ++#define SS_IV_ARBITRARY (1 << 14) ++ ++/* SS operation mode - bits 12-13 */ ++#define SS_ECB (0 << 12) ++#define SS_CBC (1 << 12) ++#define SS_CTS (3 << 12) ++ ++/* Counter width for CNT mode - bits 10-11 */ ++#define SS_CNT_16BITS (0 << 10) ++#define SS_CNT_32BITS (1 << 10) ++#define SS_CNT_64BITS (2 << 10) ++ ++/* Key size for AES - bits 8-9 */ ++#define SS_AES_128BITS (0 << 8) ++#define SS_AES_192BITS (1 << 8) ++#define SS_AES_256BITS (2 << 8) ++ ++/* Operation direction - bit 7 */ ++#define SS_ENCRYPTION (0 << 7) ++#define SS_DECRYPTION (1 << 7) ++ ++/* SS Method - bits 4-6 */ ++#define SS_OP_AES (0 << 4) ++#define SS_OP_DES (1 << 4) ++#define SS_OP_3DES (2 << 4) ++#define SS_OP_SHA1 (3 << 4) ++#define SS_OP_MD5 (4 << 4) ++#define SS_OP_PRNG (5 << 4) ++ ++/* Data end bit - bit 2 */ ++#define SS_DATA_END (1 << 2) ++ ++/* PRNG start bit - bit 1 */ ++#define SS_PRNG_START (1 << 1) ++ ++/* SS Enable bit - bit 0 */ ++#define SS_DISABLED (0 << 0) ++#define SS_ENABLED (1 << 0) ++ ++/* SS_FCSR configuration values */ ++/* RX FIFO status - bit 30 */ ++#define SS_RXFIFO_FREE (1 << 30) ++ ++/* RX FIFO empty spaces - bits 24-29 */ ++#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f) ++ ++/* TX FIFO status - bit 22 */ ++#define SS_TXFIFO_AVAILABLE (1 << 22) ++ ++/* TX FIFO available spaces - bits 16-21 */ ++#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f) ++ ++#define SS_RX_MAX 32 ++#define SS_RX_DEFAULT SS_RX_MAX ++#define SS_TX_MAX 33 ++ ++#define SS_RXFIFO_EMP_INT_PENDING (1 << 10) ++#define SS_TXFIFO_AVA_INT_PENDING (1 << 8) ++#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2) ++#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0) ++ ++struct sun4i_ss_ctx { ++ void __iomem *base; ++ int irq; ++ struct clk *busclk; ++ struct clk *ssclk; ++ struct device *dev; ++ struct resource *res; ++ spinlock_t slock; /* control the use of the device */ ++}; ++ ++struct sun4i_ss_alg_template { ++ u32 type; ++ u32 mode; ++ union { ++ struct crypto_alg crypto; ++ struct ahash_alg hash; ++ } alg; ++ struct sun4i_ss_ctx *ss; ++}; ++ ++struct sun4i_tfm_ctx { ++ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */ ++ u32 keylen; ++ u32 keymode; ++ struct sun4i_ss_ctx *ss; ++}; ++ ++struct sun4i_cipher_req_ctx { ++ u32 mode; ++}; ++ ++struct sun4i_req_ctx { ++ u32 mode; ++ u64 byte_count; /* number of bytes "uploaded" to the device */ ++ u32 hash[5]; /* for storing SS_IVx register */ ++ char buf[64]; ++ unsigned int len; ++ struct sun4i_ss_ctx *ss; ++}; ++ ++int sun4i_hash_crainit(struct crypto_tfm *tfm); ++int sun4i_hash_init(struct ahash_request *areq); ++int sun4i_hash_update(struct ahash_request *areq); ++int sun4i_hash_final(struct ahash_request *areq); ++int sun4i_hash_finup(struct ahash_request *areq); ++int sun4i_hash_digest(struct ahash_request *areq); ++int sun4i_hash_export_md5(struct ahash_request *areq, void *out); ++int sun4i_hash_import_md5(struct ahash_request *areq, const void *in); ++int sun4i_hash_export_sha1(struct ahash_request *areq, void *out); ++int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in); ++ ++int sun4i_ss_cbc_aes_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_cbc_aes_decrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_aes_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_aes_decrypt(struct ablkcipher_request *areq); ++ ++int sun4i_ss_cbc_des_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_cbc_des_decrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_des_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_des_decrypt(struct ablkcipher_request *areq); ++ ++int sun4i_ss_cbc_des3_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_cbc_des3_decrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_des3_encrypt(struct ablkcipher_request *areq); ++int sun4i_ss_ecb_des3_decrypt(struct ablkcipher_request *areq); ++ ++int sun4i_ss_cipher_init(struct crypto_tfm *tfm); ++int sun4i_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); ++int sun4i_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); ++int sun4i_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); diff --git a/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch b/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch new file mode 100644 index 0000000000..d47cc0b416 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch @@ -0,0 +1,68 @@ +From e4127db9b980a5684c537d9010ed2aaa05a1e79a Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Sat, 24 May 2014 20:53:49 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add OOB irq support to boards with broadcom + sdio wifi + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++ + arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++ + 2 files changed, 22 insertions(+) + +Index: linux-4.1.3/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +=================================================================== +--- linux-4.1.3.orig/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ++++ linux-4.1.3/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +@@ -71,12 +71,23 @@ + }; + + mmc3: mmc@01c12000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; ++ ++ brcmf: bcrmf@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <10 8>; /* PH10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; + }; + + usbphy: phy@01c13400 { +Index: linux-4.1.3/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +=================================================================== +--- linux-4.1.3.orig/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts ++++ linux-4.1.3/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +@@ -69,12 +69,23 @@ + }; + + mmc3: mmc@01c12000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; ++ ++ brcmf: bcrmf@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <10 8>; /* PH10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; + }; + + usbphy: phy@01c13400 { diff --git a/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch new file mode 100644 index 0000000000..ca09504e3a --- /dev/null +++ b/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch @@ -0,0 +1,77 @@ +From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai <wens@csie.org> +Date: Thu, 26 Dec 2013 17:15:47 +0800 +Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS + +The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The +Bluetooth part is a BCM20710 IC connected to UART2 in the A20 +SoC. The IC also takes a 32.768 KHz low power clock input, a power +enable signal and a wake signal via GPIO. + +The Bluetooth module supports out-of-band interrupt signaling via +GPIO, but this is not supported in this patch. +--- + arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +Index: linux-4.1.3/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +=================================================================== +--- linux-4.1.3.orig/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ++++ linux-4.1.3/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +@@ -88,6 +88,20 @@ + interrupts = <10 8>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; ++ ++ bt_pwr_pin: bt_pwr_pin@0 { ++ allwinner,pins = "PH18"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ bt_wake_pin: bt_wake_pin@0 { ++ allwinner,pins = "PH24"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + usbphy: phy@01c13400 { +@@ -171,6 +185,12 @@ + status = "okay"; + }; + ++ uart2: serial@01c28800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins_a>; ++ status = "okay"; ++ }; ++ + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; +@@ -264,6 +284,22 @@ + enable-active-high; + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; + }; ++ ++ rfkill-switches { ++ compatible = "simple-bus"; ++ pinctrl-names = "default"; ++ ++ rfkill_bt { ++ compatible = "rfkill-gpio"; ++ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>; ++ rfkill-name = "bt"; ++ rfkill-type = <2>; ++ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */ ++ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */ ++ clocks = <&clk_out_a>; ++ clock-frequency = <32768>; ++ }; ++ }; + }; + + #include "axp209.dtsi" diff --git a/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch new file mode 100644 index 0000000000..e60aece1e6 --- /dev/null +++ b/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch @@ -0,0 +1,252 @@ +Index: linux-4.1.3/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-4.1.3.orig/arch/arm/boot/dts/Makefile ++++ linux-4.1.3/arch/arm/boot/dts/Makefile +@@ -554,6 +554,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ + sun7i-a20-i12-tvbox.dtb \ ++ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-m3.dtb \ + sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime2.dtb \ +Index: linux-4.1.3/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +=================================================================== +--- /dev/null ++++ linux-4.1.3/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +@@ -0,0 +1,235 @@ ++/* ++ * Copyright 2015 Daniel Golle <daniel@makrotopia.org> ++ * Copyright 2014 Hans de Goede <hdegoede@redhat.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public ++ * License along with this library; if not, write to the Free ++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun7i-a20.dtsi" ++#include "sunxi-common-regulators.dtsi" ++#include <dt-bindings/input/input.h> ++ ++/ { ++ model = "Lamobo R1"; ++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ spi0: spi@01c05000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>; ++ status = "okay"; ++ }; ++ ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 0>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ target-supply = <®_ahci_5v>; ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ mmc0_cd_pin_lamobo: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <0>; ++ allwinner,pull = <1>; ++ }; ++ ++ gmac_power_pin_lamobo: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_lamobo: led_pins@0 { ++ allwinner,pins = "PH2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <1>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ lradc: lradc@01c22800 { ++ allwinner,chan0-step = <200>; ++ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN ++ KEY_MENU KEY_SEARCH KEY_HOME ++ KEY_ESC KEY_ENTER>; ++ status = "okay"; ++ }; ++ ++ ir0: ir@01c21800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart3: serial@01c28c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_b>; ++ status = "okay"; ++ }; ++ ++ uart7: serial@01c29c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ i2c1: i2c@01c2b000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c2: i2c@01c2b400 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_lamobo>; ++ ++ green { ++ label = "lamobo:green:usr"; ++ gpios = <&pio 7 24 0>; ++ default-state = "on"; ++ }; ++ }; ++ ++ reg_ahci_5v: ahci-5v { ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_lamobo>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 7 23 0>; ++ status = "okay"; ++ }; ++}; |