diff options
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 10 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 6 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9341_pcs_cr3000.dts | 172 | ||||
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 9 |
4 files changed, 194 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index e73a0a03c9..6f1bdc6eaf 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -28,15 +28,19 @@ case "$board" in ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" ;; - "pcs,cap324") ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0" ;; - +"pcs,cr3000") + ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04" + ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" + ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" + ;; "pcs,cr5000") ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1" ;; - "tplink,re450-v2") ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index a4d91fcdf2..0bc187a245 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -44,6 +44,12 @@ ath79_setup_interfaces() "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4" ;; + "pcs,cr3000") + ucidef_add_switch "switch0" \ + "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" + ucidef_set_interface_wan "eth0" + ;; + "pcs,cr5000") ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" diff --git a/target/linux/ath79/dts/ar9341_pcs_cr3000.dts b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts new file mode 100644 index 0000000000..48ec783058 --- /dev/null +++ b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9341.dtsi" + +/ { + model = "PowerCloud Systems CR3000"; + compatible = "pcs,cr3000", "qca,ar9341"; + + aliases { + serial0 = &uart; + led-status = &status; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status: power { + label = "pcs:amber:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "pcs:blue:wlan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "pcs:blue:wan"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan1 { + label = "pcs:blue:lan1"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan2 { + label = "pcs:blue:lan2"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan3 { + label = "pcs:blue:lan3"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan4 { + label = "pcs:blue:lan4"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&spi { + num-cs = <1>; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x050000 0x07a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <1>; + +}; + +ð1 { + status = "okay"; + + phy-handle = <&swphy4>; + mtd-mac-address = <&art 0x0>; + phy-mode = "gmii"; + pll-data = <0x06000000 0x00000101 0x00001616>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 7695349705..a924fa90b0 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -75,6 +75,15 @@ define Device/pcs_cap324 endef TARGET_DEVICES += pcs_cap324 +define Device/pcs_cr3000 + ATH_SOC := ar9341 + DEVICE_TITLE := PowerCloud Systems CR3000 + IMAGE_SIZE := 7808k + IMAGES := sysupgrade.bin + SUPPORTED_DEVICES += cr3000 +endef +TARGET_DEVICES += pcs_cr3000 + define Device/pcs_cr5000 ATH_SOC := ar9344 DEVICE_TITLE := PowerCloud Systems CR5000 |