diff options
| -rw-r--r-- | package/madwifi/Makefile | 3 | ||||
| -rw-r--r-- | target/linux/storm/Makefile | 28 | ||||
| -rw-r--r-- | target/linux/storm/config-default | 358 | ||||
| -rw-r--r-- | target/linux/storm/image/Makefile | 41 | ||||
| -rw-r--r-- | target/linux/storm/patches/1001-arch.patch | 9010 | ||||
| -rw-r--r-- | target/linux/storm/patches/1002-gmac.patch | 18584 | ||||
| -rw-r--r-- | target/linux/storm/patches/1003-gmac_one_phy.patch | 13 | ||||
| -rw-r--r-- | target/linux/storm/patches/1004-gmac-enable-napi.patch | 83 | ||||
| -rw-r--r-- | target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch | 250 | ||||
| -rw-r--r-- | target/linux/storm/patches/1006-gmac-napi-tx.patch | 2098 | ||||
| -rw-r--r-- | target/linux/storm/patches/1020-mtd.patch | 4981 | ||||
| -rw-r--r-- | target/linux/storm/patches/1021-serial.patch | 2825 | ||||
| -rw-r--r-- | target/linux/storm/patches/1100-gpio.patch | 390 | ||||
| -rw-r--r-- | toolchain/Config.in | 1 | ||||
| -rw-r--r-- | toolchain/uClibc/config/arm.storm | 210 |
15 files changed, 38875 insertions, 0 deletions
diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile index d502e33f59..697f2b68a5 100644 --- a/package/madwifi/Makefile +++ b/package/madwifi/Makefile @@ -48,6 +48,9 @@ endif ifeq ($(ARCH),powerpc) HAL_TARGET:=powerpc-be-elf endif +ifeq ($(BOARD),storm) + HAL_TARGET:=armv4-le-elf +endif ifneq ($(CONFIG_TARGET_atheros),) BUS:=AHB diff --git a/target/linux/storm/Makefile b/target/linux/storm/Makefile new file mode 100644 index 0000000000..c0d0023cc1 --- /dev/null +++ b/target/linux/storm/Makefile @@ -0,0 +1,28 @@ +# +# Copyright (C) 2006-2008 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=storm +BOARDNAME:=Storm SL3512 +FEATURES:=squashfs pci broken + +LINUX_VERSION:=2.6.23.16 + +include $(INCLUDE_DIR)/target.mk + +define Target/Description + Build images for boards based on the Storm Semiconductor SL3512, eg. Wiligear WBD-111 +endef + +define Kernel/Configure + $(call Kernel/Configure/Default) + $(SED) 's,.*CONFIG_AEABI.*,$(if $(CONFIG_EABI_SUPPORT),CONFIG_AEABI=y,# CONFIG_AEABI is not set),' $(LINUX_DIR)/.config + $(if $(CONFIG_EABI_SUPPORT),echo '# CONFIG_OABI_COMPAT is not set' >> $(LINUX_DIR)/.config) +endef + +$(eval $(call BuildTarget)) diff --git a/target/linux/storm/config-default b/target/linux/storm/config-default new file mode 100644 index 0000000000..043d5fe750 --- /dev/null +++ b/target/linux/storm/config-default @@ -0,0 +1,358 @@ +# CONFIG_AEABI is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SHARK is not set +CONFIG_ARCH_SL2312=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARM=y +# CONFIG_ARPD is not set +# CONFIG_ARTHUR is not set +# CONFIG_ATM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BINFMT_AOUT is not set +CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BONDING is not set +CONFIG_BOUNCE=y +CONFIG_BRIDGE=m +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_BT is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_CIFS is not set +# CONFIG_CLS_U32_PERF is not set +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttySL0,19200 init=/etc/preinit mem=32M loglevel=8" +# CONFIG_CONFIGFS_FS is not set +CONFIG_CPU_32=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_FA=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_FA=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +CONFIG_CPU_FA526=y +CONFIG_CPU_FA_BTB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_TLB_FA=y +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRYPTO is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_ELF_CORE=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_EPOLL is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_FORCED_INLINING=y +# CONFIG_FPE_FASTFPE is not set +# CONFIG_FPE_NWFPE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FUTEX is not set +# CONFIG_FW_LOADER is not set +CONFIG_GEMINI_GPIO_DEV=y +# CONFIG_GEMINI_IPI is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_HAMRADIO is not set +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HW_RANDOM=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +# CONFIG_IEEE80211 is not set +# CONFIG_IFB is not set +# CONFIG_IKCONFIG is not set +# CONFIG_IMQ is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_DIAG is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IPSEC_NAT_TRAVERSAL is not set +# CONFIG_IPV6 is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_NF_ARPTABLES is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_IPP2P is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_SET is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_IMQ is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_ROUTE is not set +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ISDN is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_JFFS2_RTIME is not set +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KMOD=y +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_MINI_FO is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ROOTFS_ROOT_DEV is not set +# CONFIG_MTD_ROOTFS_SPLIT is not set +# CONFIG_MTD_SERIAL is not set +CONFIG_MTD_SL2312_CFI=y +# CONFIG_MTD_SL2312_SERIAL_ATMEL is not set +# CONFIG_MTD_SL2312_SERIAL_ST is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ESFQ is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_NFSD is not set +# CONFIG_NFS_FS is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NLS is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_NVRAM is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_PACKET=m +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_SYSCALL=y +# CONFIG_PPP is not set +CONFIG_PRINTK_TIME=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_SL2312=y +CONFIG_SERIAL_SL2312_CONSOLE=y +# CONFIG_SHMEM is not set +# CONFIG_SL2312_LPC is not set +# CONFIG_SL2312_SHARE_PIN is not set +# CONFIG_SL2312_USB is not set +CONFIG_SL3516_ASIC=y +# CONFIG_SMC91X is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SOUND is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_STANDALONE is not set +# CONFIG_SWAP is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSVIPC is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_TIMER_STATS is not set +CONFIG_TINY_SHMEM=y +# CONFIG_TUN is not set +# CONFIG_UDF_FS is not set +CONFIG_UID16=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_USER_NS is not set +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFAT_FS is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_DEV is not set +CONFIG_VLAN_8021Q=m +# CONFIG_WLAN_80211 is not set +# CONFIG_XFRM_USER is not set +# CONFIG_XFS_FS is not set +# CONFIG_XIP_KERNEL is not set +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/target/linux/storm/image/Makefile b/target/linux/storm/image/Makefile new file mode 100644 index 0000000000..b061c6d0ef --- /dev/null +++ b/target/linux/storm/image/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Image/Prepare + cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage +endef + +define Image/BuildKernel + cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage +# +# XXX - FIXME +# +# BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) +endef + +define Image/Build/jffs2-64k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=65536 conv=sync +endef + +define Image/Build/jffs2-128k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync + $(call Image/Build/slug,$(1)) +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync + $(call Image/Build/slug,$(1)) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/storm/patches/1001-arch.patch b/target/linux/storm/patches/1001-arch.patch new file mode 100644 index 0000000000..8fb9d2101c --- /dev/null +++ b/target/linux/storm/patches/1001-arch.patch @@ -0,0 +1,9010 @@ +Index: linux-2.6.23.16/arch/arm/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/Kconfig 2008-03-13 17:46:04.000791190 +0200 ++++ linux-2.6.23.16/arch/arm/Kconfig 2008-03-13 17:48:24.508798285 +0200 +@@ -220,6 +220,9 @@ + help + This enables support for the Cirrus EP93xx series of CPUs. + ++config ARCH_SL2312 ++ bool "SL2312" ++ + config ARCH_FOOTBRIDGE + bool "FootBridge" + select FOOTBRIDGE +@@ -414,6 +417,8 @@ + + source "arch/arm/mach-footbridge/Kconfig" + ++source "arch/arm/mach-sl2312/Kconfig" ++ + source "arch/arm/mach-integrator/Kconfig" + + source "arch/arm/mach-iop32x/Kconfig" +@@ -549,6 +554,16 @@ + config PCI_SYSCALL + def_bool PCI + ++config SL2312_LPC ++ bool "LPC Host Support" ++ depends on ARCH_SL2312 ++ help ++ ++config SL2312_LPC_IT8712 ++ bool "IT8712 Support" ++ depends on ARCH_SL2312 && SL2312_LPC ++ help ++ + # Select the host bridge type + config PCI_HOST_VIA82C505 + bool +@@ -988,6 +1003,10 @@ + source "drivers/mtd/Kconfig" + endif + ++if ARCH_SL2312 ++source "drivers/telephony/Kconfig" ++endif ++ + source "drivers/parport/Kconfig" + + source "drivers/pnp/Kconfig" +@@ -997,7 +1016,7 @@ + if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ +- || ARCH_IXP23XX ++ || ARCH_IXP23XX || ARCH_SL2312 + source "drivers/ide/Kconfig" + endif + +Index: linux-2.6.23.16/arch/arm/Makefile +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/Makefile 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/Makefile 2008-03-13 17:48:24.508798285 +0200 +@@ -72,6 +72,7 @@ + tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi ++tune-$(CONFIG_CPU_FA52X) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 + tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 + tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +@@ -111,6 +112,7 @@ + machine-$(CONFIG_ARCH_PXA) := pxa + machine-$(CONFIG_ARCH_L7200) := l7200 + machine-$(CONFIG_ARCH_INTEGRATOR) := integrator ++ machine-$(CONFIG_ARCH_SL2312) := sl2312 + textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 + machine-$(CONFIG_ARCH_CLPS711X) := clps711x + machine-$(CONFIG_ARCH_IOP32X) := iop32x +Index: linux-2.6.23.16/arch/arm/boot/compressed/Makefile +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/boot/compressed/Makefile 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/boot/compressed/Makefile 2008-03-13 17:48:24.508798285 +0200 +@@ -19,6 +19,10 @@ + OBJS += head-shark.o ofw-shark.o + endif + ++ifeq ($(CONFIG_ARCH_SL2312),y) ++OBJS += head-sl2312.o ++endif ++ + ifeq ($(CONFIG_ARCH_L7200),y) + OBJS += head-l7200.o + endif +Index: linux-2.6.23.16/arch/arm/boot/compressed/head-sl2312.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/boot/compressed/head-sl2312.S 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,6 @@ ++#include <asm/mach-types.h> ++#include <asm/arch/sl2312.h> ++ ++ .section ".start", "ax" ++ mov r7, #MACH_TYPE_SL2312 ++ +Index: linux-2.6.23.16/arch/arm/boot/compressed/head.S +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/boot/compressed/head.S 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/boot/compressed/head.S 2008-03-13 17:48:24.508798285 +0200 +@@ -57,6 +57,17 @@ + mov \rb, #0x50000000 + add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT + .endm ++/***************************************************** ++ * for Storlink SoC ++ *****************************************************/ ++#elif defined(CONFIG_ARCH_SL2312) ++ .macro loadsp, rb ++ mov \rb, #0x16000000 ++ .endm ++ .macro writeb, rb ++ strb \rb, [r3, #0] ++ .endm ++/****************************************************/ + #else + .macro loadsp, rb + addruart \rb +@@ -116,7 +127,28 @@ + .rept 8 + mov r0, r0 + .endr +- ++/***************************************************************************** ++ * for Storlink Soc -- on chip UART ++ *****************************************************************************/ ++#ifndef CONFIG_SERIAL_IT8712 // Jason test ++@ mov r3, #0x22000000 ++ mov r3, #0x42000000 ++ mov r11, #0x80 ++ strb r11, [r3, #0xc] ++ mov r11, #0x0 ++ strb r11, [r3, #0x4] ++#ifndef CONFIG_SL3516_ASIC ++ mov r11, #0x9C /*0x9c->19200 0x4E->38400 0x34->57600 */ ++#else ++ mov r11, #0x9C /* 0x61 for 30MHz on GeminiA chip*/ ++#endif ++ strb r11, [r3, #0x0] ++ mov r11, #0x03 ++ strb r11, [r3, #0xc] ++ mov r11, #0xFB ++ strb r11, [r3, #0x18] ++#endif ++/*****************************************************************************/ + b 1f + .word 0x016f2818 @ Magic numbers to help the loader + .word start @ absolute load/run zImage address +@@ -458,6 +490,39 @@ + mcr p15, 0, r0, c7, c5, 4 @ ISB + mov pc, r12 + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_on: ++ mov r12, lr ++ bl __setup_mmu ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c6, 0 @ Invalidate D cache ++ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs ++ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer ++ mov r0, #-1 ++ mcr p15, 0, r0, c3, c0, 0 @ load domain access register ++ mrc p15, 0, r0, c1, c0, 0 ++ mov r0, r0 ++ mov r0, r0 ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ orr r0, r0, #0x0004 @ .... .... .... .1.. ++#endif ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ orr r0, r0, #0x1000 @ ...1 .... .... .... ++#endif ++ ++#ifndef DEBUG ++ orr r0, r0, #0x0039 @ Write buffer, mmu ++#endif ++ mcr p15, 0, r0, c1, c0 ++ mov r0, r0 ++ mov r0, r0 ++ mov pc, r12 ++/********************************************************************************/ ++ + __arm6_mmu_cache_on: + mov r12, lr + bl __setup_mmu +@@ -625,6 +690,16 @@ + + @ These match on the architecture ID + ++/***************************************************************************** ++ * for Storlink Soc -- CPU architecture ID ++ *****************************************************************************/ ++ .word 0x66015261 @ FA526 ++ .word 0xff01fff1 ++ b __fa526_cache_on ++ b __fa526_cache_off ++ b __fa526_cache_flush ++/*****************************************************************************/ ++ + .word 0x00020000 @ ARMv4T + .word 0x000f0000 + b __armv4_mmu_cache_on +@@ -712,6 +787,23 @@ + mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB + mov pc, r12 + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_off: ++ mrc p15, 0, r0, c1, c0 ++ bic r0, r0, #0x000d ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache ++ mcr p15, 0, r1, c7, c10, 4 @ drain WB ++ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c5, 0 @ invalidate whole cache v4 ++ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB v4 ++ mov pc, lr ++/*****************************************************************************/ ++ ++ + __arm6_mmu_cache_off: + mov r0, #0x00000030 @ ARM6 control reg. + b __armv3_mmu_cache_off +@@ -759,6 +851,17 @@ + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_flush: ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache ++ mcr p15, 0, r1, c7, c5, 0 @ flush I cache ++ mcr p15, 0, r1, c7, c10, 4 @ drain WB ++ mov pc, lr ++/*****************************************************************************/ ++ + + __armv6_mmu_cache_flush: + mov r1, #0 +Index: linux-2.6.23.16/arch/arm/boot/compressed/it8712.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/boot/compressed/it8712.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,25 @@ ++ ++#ifndef __IT8712_H__ ++#define __IT8712_H__ ++ ++#include "asm/arch/sl2312.h" ++ ++#define IT8712_IO_BASE SL2312_LPC_IO_BASE ++//#define IT8712_IO_BASE 0x27000000 ++// Device LDN ++#define LDN_SERIAL1 0x01 ++#define LDN_SERIAL2 0x02 ++#define LDN_PARALLEL 0x03 ++#define LDN_KEYBOARD 0x05 ++#define LDN_MOUSE 0x06 ++#define LDN_GPIO 0x07 ++ ++#define IT8712_UART1_PORT 0x3F8 ++#define IT8712_UART2_PORT 0x2F8 ++ ++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 ++ ++void LPCSetConfig(char LdnNumber, char Index, char data); ++char LPCGetConfig(char LdnNumber, char Index); ++ ++#endif +Index: linux-2.6.23.16/arch/arm/boot/compressed/misc.c +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/boot/compressed/misc.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/boot/compressed/misc.c 2008-03-13 17:48:24.508798285 +0200 +@@ -30,7 +30,7 @@ + #include <asm/arch/uncompress.h> + + #ifdef CONFIG_DEBUG_ICEDCC +- ++#include "it8712.h" + #ifdef CONFIG_CPU_V6 + + static void icedcc_putc(int ch) +@@ -69,6 +69,7 @@ + #define flush() do { } while (0) + #endif + ++#if 0 + static void putstr(const char *ptr) + { + char c; +@@ -81,11 +82,36 @@ + + flush(); + } ++#endif + + #endif + + #define __ptr_t void * + ++#ifdef CONFIG_SERIAL_IT8712 ++unsigned int it8712_uart_base; ++#define UART_RX 0 ++#define UART_TX 0 ++#define UART_DLL 0 ++#define UART_TRG 0 ++#define UART_DLM 1 ++#define UART_IER 1 ++#define UART_FCTR 1 ++#define UART_IIR 2 ++#define UART_FCR 2 ++#define UART_EFR 2 ++#define UART_LCR 3 ++#define UART_MCR 4 ++#define UART_LSR 5 ++#define UART_MSR 6 ++#define UART_SCR 7 ++#define UART_EMSR 7 ++void LPCEnterMBPnP(void); ++void LPCExitMBPnP(void); ++int SearchIT8712(void); ++int InitLPCInterface(void); ++#endif ++ + /* + * Optimised C version of memzero for the ARM. + */ +@@ -346,6 +372,9 @@ + decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, + int arch_id) + { ++#ifdef CONFIG_SERIAL_IT8712 ++ unsigned char *addr; ++#endif + output_data = (uch *)output_start; /* Points to kernel start */ + free_mem_ptr = free_mem_ptr_p; + free_mem_ptr_end = free_mem_ptr_end_p; +@@ -353,6 +382,33 @@ + + arch_decomp_setup(); + ++#ifdef CONFIG_SERIAL_IT8712 ++ ++ InitLPCInterface(); ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ it8712_uart_base = IT8712_IO_BASE; ++ it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ ++ do { ++ addr = (unsigned char *)(it8712_uart_base + UART_LCR) ; ++ *addr = 0x80; ++ // Set Baud Rate ++ addr = (unsigned char *)(it8712_uart_base+UART_DLL); ++ *addr = 0x06 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_DLM); ++ *addr = 0x00 ; ++ ++ addr = (unsigned char *)(it8712_uart_base+UART_LCR); // LCR ++ *addr = 0x07 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_MCR); // MCR ++ *addr = 0x08 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_FCR); // FCR ++ *addr = 0x01 ; ++ } while(0); ++#endif ++ + makecrc(); + putstr("Uncompressing Linux..."); + gunzip(); +@@ -374,4 +430,119 @@ + return 0; + } + #endif ++ ++#ifdef CONFIG_SERIAL_IT8712 ++ ++#define LPC_KEY_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e) ++#define LPC_DATA_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f) ++#define LPC_BUS_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 0) ++#define LPC_BUS_STATUS *( unsigned char*) (SL2312_LPC_HOST_BASE + 2) ++#define LPC_SERIAL_IRQ_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 4) ++ ++char LPCGetConfig(char LdnNumber, char Index) ++{ ++ char rtn; ++ unsigned char *addr ; ++ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ ++ addr = LPC_KEY_ADDR; ++ *addr = 0x07 ; ++ ++ addr = LPC_DATA_ADDR; ++ *addr = LdnNumber ; ++ ++ addr = LPC_KEY_ADDR; ++ *addr = Index ; ++ ++ addr = LPC_DATA_ADDR ; ++ rtn = *addr ; ++ ++ LPCExitMBPnP(); ++ return rtn; ++ ++} ++ ++void LPCSetConfig(char LdnNumber, char Index, char data) ++{ ++ unsigned char *addr; ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ addr = LPC_KEY_ADDR; ++ *addr = 0x07; ++ addr = LPC_DATA_ADDR; ++ *addr = LdnNumber; ++ addr = LPC_KEY_ADDR; ++ *addr = Index; ++ addr = LPC_DATA_ADDR; ++ *addr = data; ++ ++ LPCExitMBPnP(); ++} ++ ++//unsigned char key[4] ; ++void LPCEnterMBPnP(void) ++{ ++ unsigned char *addr; ++ addr = LPC_KEY_ADDR; ++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; ++ ++ do { ++ *addr = key[0]; ++ *addr = key[1]; ++ *addr = key[2]; ++ *addr = key[3]; ++ }while(0); ++} ++ ++void LPCExitMBPnP(void) ++{ ++ unsigned char *addr; ++ addr = LPC_KEY_ADDR; ++ *addr = 0x02 ; ++ ++ addr = LPC_DATA_ADDR; ++ *addr = 0x02 ; ++} ++ ++int InitLPCInterface(void) ++{ ++ int i; ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ ++ for(i=0;i<0x2000;i++) ; ++ ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ if (!SearchIT8712()) ; ++// while(1); ++ return 0; ++} ++ ++int SearchIT8712(void) ++{ ++ unsigned char Id1, Id2; ++ unsigned short Id; ++ unsigned char *addr; ++ ++ LPCEnterMBPnP(); ++ addr = LPC_KEY_ADDR; ++ *addr = 0x20 ; ++ addr = LPC_DATA_ADDR; ++ Id1 = *addr ; ++ ++ addr = LPC_KEY_ADDR; ++ *addr = 0x21 ; ++ addr = LPC_DATA_ADDR; ++ Id2 = *addr ; ++ ++ Id = (Id1 << 8) | Id2; ++ LPCExitMBPnP(); ++ ++ if (Id == 0x8712) ++ return 1; ++ else ++ return 0; ++} ++ ++#endif + +Index: linux-2.6.23.16/arch/arm/kernel/entry-armv.S +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/kernel/entry-armv.S 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/kernel/entry-armv.S 2008-03-13 17:48:24.508798285 +0200 +@@ -18,6 +18,8 @@ + #include <asm/memory.h> + #include <asm/glue.h> + #include <asm/vfpmacros.h> ++#include <asm/arch/irqs.h> ++#include <asm/hardware.h> + #include <asm/arch/entry-macro.S> + #include <asm/thread_notify.h> + +Index: linux-2.6.23.16/arch/arm/kernel/irq.c +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/kernel/irq.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/kernel/irq.c 2008-03-13 17:48:24.508798285 +0200 +@@ -40,6 +40,8 @@ + #include <asm/system.h> + #include <asm/mach/time.h> + ++extern int fixup_irq(unsigned int irq); ++ + /* + * No architecture-specific irq_finish function defined in arm/arch/irqs.h. + */ +@@ -111,8 +113,11 @@ + asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) + { + struct pt_regs *old_regs = set_irq_regs(regs); +- struct irq_desc *desc = irq_desc + irq; ++// struct irq_desc *desc = irq_desc + irq; ++ struct irq_desc *desc; + ++ irq = fixup_irq(irq); ++ desc = irq_desc + irq; + /* + * Some hardware gives randomly wrong interrupts. Rather + * than crashing, do something sensible. +Index: linux-2.6.23.16/arch/arm/kernel/process.c +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/kernel/process.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/kernel/process.c 2008-03-13 17:48:24.508798285 +0200 +@@ -117,7 +117,7 @@ + void (*pm_idle)(void); + EXPORT_SYMBOL(pm_idle); + +-void (*pm_power_off)(void); ++//void (*pm_power_off)(void); + EXPORT_SYMBOL(pm_power_off); + + void (*arm_pm_restart)(char str) = arm_machine_restart; +@@ -188,13 +188,37 @@ + + void machine_halt(void) + { ++ unsigned int reg_v; ++ ++ printk("arch_power_off\n"); ++ ++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ reg_v &= ~0x00000002; ++ reg_v |= 0x1; ++ mdelay(5); ++ // Power off ++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ + } + + + void machine_power_off(void) + { +- if (pm_power_off) ++ unsigned int reg_v; ++ ++// if (pm_power_off) ++ if (&pm_power_off!=NULL) + pm_power_off(); ++ ++ printk("arch_power_off\n"); ++ ++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ reg_v &= ~0x00000002; ++ reg_v |= 0x1; ++ mdelay(5); ++ // Power off ++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ + } + + void machine_restart(char * __unused) +Index: linux-2.6.23.16/arch/arm/kernel/time.c +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/kernel/time.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/kernel/time.c 2008-03-13 17:48:24.508798285 +0200 +@@ -502,8 +502,13 @@ + + device_initcall(timer_init_sysfs); + ++extern unsigned int rtc_get_time_second(void); ++ + void __init time_init(void) + { ++#ifdef CONFIG_SL2312_RTC ++ xtime.tv_sec = rtc_get_time_second() ; ++#endif + #ifndef CONFIG_GENERIC_TIME + if (system_timer->offset == NULL) + system_timer->offset = dummy_gettimeoffset; +Index: linux-2.6.23.16/arch/arm/mach-sl2312/Kconfig +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/Kconfig 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,33 @@ ++ ++menu "SL2312" ++ ++config SL3516_ASIC ++ bool "SL3516 ASIC version" ++ depends on ARCH_SL2312 ++ help ++ This option to select AISC or FPGA ++config PCI ++ bool "SL2312 PCI" ++ depends on ARCH_SL2312 ++ help ++ This option to enable Storlink PCI controller ++ ++config SL2312_LPC ++ bool "SL2312 LPC" ++ depends on ARCH_SL2312 ++ help ++ This option to enable Low Pin Count controller ++ ++config SL2312_USB ++ bool "SL2312 USB" ++ depends on ARCH_SL2312 ++ help ++ This option to enable USB OTG host controller ++ ++config GEMINI_IPI ++ bool "Gemini IPI test" ++ depends on ARCH_SL2312 ++ help ++ Enable this option to test dual cpu Inter-Processor-Interrupt ++endmenu ++ +Index: linux-2.6.23.16/arch/arm/mach-sl2312/Makefile +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/Makefile 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,16 @@ ++# ++# Makefile for the linux kernel. ++# ++ ++# Object file lists. ++ ++obj-y := arch.o irq.o mm.o time.o sl3516_device.o ++obj-m := ++obj-n := ++ ++ ++obj-$(CONFIG_PCI) += pci.o ++obj-$(CONFIG_SL2312_LPC) += lpc.o ++obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o ++obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o ++obj-$(CONFIG_GEMINI_IPI) += gemini_ipi.o +Index: linux-2.6.23.16/arch/arm/mach-sl2312/Makefile.boot +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/Makefile.boot 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,5 @@ ++ zreladdr-y := 0x00008000 ++params_phys-y := 0x00508100 ++#params_phys-y := 0x00008100 ++initrd_phys-y := 0x00800000 ++ +Index: linux-2.6.23.16/arch/arm/mach-sl2312/arch.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/arch.c 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,72 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/arch.c ++ * ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include <linux/types.h> ++#include <linux/init.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/mach/time.h> ++#include <asm/mach/arch.h> ++ ++extern void sl2312_map_io(void); ++extern void sl2312_init_irq(void); ++extern unsigned long sl2312_gettimeoffset (void); ++extern void __init sl2312_time_init(void); ++ ++static struct sys_timer sl2312_timer = { ++ .init = sl2312_time_init, ++ .offset = sl2312_gettimeoffset, ++}; ++ ++static void __init ++sl2312_fixup(struct machine_desc *desc, struct tag *tags, ++ char **cmdline, struct meminfo *mi) ++{ ++ mi->nr_banks = 1; ++ mi->bank[0].start = 0; ++#ifdef CONFIG_GEMINI_IPI ++ mi->bank[0].size = (64*1024*1024); // 128M ++#else ++ mi->bank[0].size = (128*1024*1024); // 128M ++#endif ++ mi->bank[0].node = 0; ++} ++ ++/* MACHINE_START(SL2312, "GeminiA") ++ MAINTAINER("Storlink Semi") ++ BOOT_MEM(0x00000000, 0x90000000, 0xf0000000) ++ FIXUP(sl2312_fixup) ++ MAPIO(sl2312_map_io) ++ INITIRQ(sl2312_init_irq) ++ .timer = &sl2312_timer, ++MACHINE_END */ ++ ++MACHINE_START(SL2312, "GeminiA") ++ /* .phys_ram = 0x00000000, */ ++ .phys_io = 0x7fffc000, ++ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, ++ .boot_params = 0x100, ++ .fixup = sl2312_fixup, ++ .map_io = sl2312_map_io, ++ .init_irq = sl2312_init_irq, ++ .timer = &sl2312_timer, ++MACHINE_END +Index: linux-2.6.23.16/arch/arm/mach-sl2312/gemini_ipi.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/gemini_ipi.c 2008-03-15 16:53:01.339687322 +0200 +@@ -0,0 +1,593 @@ ++/* ++ * FILE NAME sl_cir.c ++ * ++ * BRIEF MODULE DESCRIPTION ++ * IPI Driver for CPU1. ++ * ++ * Author: StorLink, Corp. ++ * Jason Lee ++ * ++ * Copyright 2002~2006 StorLink, Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMit8712D TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMit8712D TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, writ8712 to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/miscdevice.h> ++#include <linux/init.h> ++#include <linux/pagemap.h> ++#include <asm/uaccess.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/delay.h> ++#include <linux/fs.h> ++#include <linux/interrupt.h> ++#include <asm/io.h> ++#include <asm/delay.h> ++#include <linux/signal.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/int_ctrl.h> ++#include <asm/arch/ipi.h> ++#include <linux/dma-mapping.h> ++ ++ ++#include <linux/mm.h> ++ ++#include <linux/bootmem.h> ++ ++#include <asm/hardware.h> ++#include <asm/page.h> ++#include <asm/setup.h> ++#include <asm/pgtable.h> ++#include <asm/pgalloc.h> ++ ++#include <asm/mach/map.h> ++ ++ ++static int sl_ipi_debug = 1 ; ++#define DEB(x) if(sl_ipi_debug>=1) x ++ ++#define SRAM_PTR IO_ADDRESS(SL2312_SRAM_BASE) ++volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR; ++volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20); ++ ++unsigned int jscale_status=0; ++ ++#define JSCALE_WAIT 0 ++#define XXXXXX_WAIT 1 ++#define MAX_WAIT_Q 8 ++wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q]; ++ ++#define DRAMCTL_DMA_CTL 0X20 ++#define DRAMCTL_DMA_SA 0X24 ++#define DRAMCTL_DMA_DA 0X28 ++#define DRAMCTL_DMA_CNT 0X2C ++#define MEMCPY_UNIT 0x40000 ++int hw_memcpy(const void *to, const void *from, unsigned int bytes) ++{ ++ unsigned int reg_a,reg_d; ++ int count = bytes,i=0; ++ ++ consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE); ++ ++ DEB(printk("hwmemcpy:count %d\n",count)); ++ while(count>0){ ++ // SA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA; ++ reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT; ++ DEB(printk("hwmemcpy:from 0x%08x\n",reg_d)); ++ writel(reg_d,reg_a); ++ // DA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA; ++ reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT; ++ writel(reg_d,reg_a); ++ DEB(printk("hwmemcpy:to 0x%08x\n",reg_d)); ++ // byte count ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT; ++ reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count; ++ writel(reg_d,reg_a); ++ // start DMA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL; ++ writel(0x80000001,reg_a); ++ ++ do{ ++ cond_resched(); ++// msleep(4); ++ reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL); ++ }while(reg_d&0x1); ++ ++ count -= MEMCPY_UNIT; ++ i++; ++ } ++ ++ return bytes; ++} ++ ++static irqreturn_t ipi_interrupt() ++{ ++ unsigned int id=getcpuid(),tmp; ++ ++ //dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000); ++ ++ ++ // Clear Interrupt ++ if(id==CPU0) { ++ tmp = readl(CPU1_STATUS); ++ tmp &= ~CPU_IPI_BIT_MASK; ++ writel(tmp,CPU1_STATUS); ++ } ++ else{ ++ tmp = readl(CPU0_STATUS); ++ tmp &= ~CPU_IPI_BIT_MASK; ++ writel(tmp,CPU0_STATUS); ++ } ++ ++ // ++ DEB(printk("ipi interrupt:0x%x\n",rsp->status)); ++ switch(rsp->status){ ++ case JSCALE_STATUS_OK: ++ ++ break; ++ case JSCALE_UNKNOWN_MSG_TYPE: ++ ++ break; ++ case JSCALE_FAILED_FILE_SIZE: ++ ++ break; ++ case JSCALE_FAILED_MALLOC: ++ ++ break; ++ case JSCALE_FAILED_FORMAT: ++ ++ break; ++ case JSCALE_DECODE_ERROR: ++ ++ break; ++ ++ } ++ jscale_status = rsp->status; ++// wake_up(&gemini_ipi_wait[JSCALE_WAIT]); ++ ++ return IRQ_HANDLED; ++} ++ ++static int gemini_ipi_open(struct inode *inode, struct file *file) ++{ ++ DEB(printk("ipi open\n")); ++ return 0; ++} ++ ++ ++static int gemini_ipi_release(struct inode *inode, struct file *file) ++{ ++ DEB(printk("ipi release\n")); ++ return 0; ++} ++ ++ ++static int gemini_ipi_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ JSCALE_RSP_T tmp; ++ ++ switch(cmd) { ++ case GEMINI_IPI_JSCALE_REQ: ++ DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality)); ++ if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T))) ++ return -EFAULT; ++ req->hdr.type = IPC_JSCALE_REQ_MSG; ++ req->hdr.length = sizeof(JSCALE_REQ_T); ++ req->input_location = CPU_1_DATA_OFFSET; ++ req->output_location = CPU_1_DATA_OFFSET; ++ break; ++ case GEMINI_IPI_JSCALE_STAT: ++ DEB(printk("ipi:ioctl jscale stat \n")); ++ if(jscale_status==JSCALE_BUSY){ // not yet ++ tmp.status = JSCALE_BUSY; ++ if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T))) ++ return -EFAULT; ++ } ++ else{ // finish or error ++ if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T))) ++ return -EFAULT; ++ } ++ break; ++ default: ++ printk("IPI: Error IOCTL number\n"); ++ return -ENOIOCTLCMD; ++ } ++ ++ return 0; ++} ++ ++#define SRAM_SIZE 0x2000 ++static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos) ++{ ++ int i=0,tmp=0,j; ++ const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); ++ DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count)); ++ memcpy(ptr,buf,count); ++ consistent_sync(ptr,count, DMA_TO_DEVICE); ++ //hw_memcpy(ptr,&buf,count); ++ ++/* if(count>SRAM_SIZE){ ++ for(i=0;i<(count/SRAM_SIZE);i++) ++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE); ++ if(count%SRAM_SIZE) ++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE); ++ } ++ else ++ raid_memcpy(ptr,buf,count); ++*/ ++ ++/* for(i=0;i<count;i++){ ++ if(buf[i]!=ptr[i]) ++ printk("ipi error:offset %d valud %x[should %x]\n",i,ptr[i],buf[i]); ++ } ++ ++ printk("===========input buf===============\n"); ++ for(i=0;i<64;i+=16){ ++ for(j=0;j<16;j++) ++ printk("%02x ",buf[i+j]); ++ printk("\n"); ++ cond_resched(); ++ } ++ printk("===========output buf==============\n"); ++ for(i=0;i<64;i+=16){ ++ for(j=0;j<16;j++) ++ printk("%02x ",ptr[i+j]); ++ printk("\n"); ++ cond_resched(); ++ } ++*/ ++ // send irq for CPU1 ++ tmp |= CPU_IPI_BIT_MASK; ++ writel(tmp,CPU0_STATUS); ++ jscale_status = JSCALE_BUSY; ++ ++ return count; ++} ++ ++static ssize_t gemini_ipi_read(struct file * file_p, char *buf, size_t length, loff_t * ppos) ++{ ++ int i=0; ++ const char *ptr=(unsigned int )__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); ++ ++ consistent_sync(ptr,length, DMA_FROM_DEVICE); ++ memcpy(buf,ptr,length); ++ DEB(printk("ipi:read 0x%x to 0x%x length:%d\n",ptr,buf,length)); ++ ++ //consistent_sync((unsigned int *)ptr,0x2000, DMA_FROM_DEVICE); // invalid ++ //hw_memcpy(buf,ptr,length); ++ ++ // need encoded file size ******** ++/* if(count>SRAM_SIZE){ ++ for(i=0;i<(count/SRAM_SIZE);i++) ++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE); ++ if(count%0xFFFF) ++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE); ++ } ++ else ++ raid_memcpy(buf,p_mbox->message,length); ++*/ ++ return length; ++} ++ ++void do_mapping_read(struct address_space *mapping, ++ struct file_ra_state *_ra, ++ struct file *filp, ++ loff_t *ppos, ++ read_descriptor_t *desc, ++ read_actor_t actor) ++{ ++ struct inode *inode = mapping->host; ++ unsigned long index; ++ unsigned long end_index; ++ unsigned long offset; ++ unsigned long last_index; ++ unsigned long next_index; ++ unsigned long prev_index; ++ loff_t isize; ++ struct page *cached_page; ++ int error; ++ struct file_ra_state ra = *_ra; ++ ++ cached_page = NULL; ++ index = *ppos >> PAGE_CACHE_SHIFT; ++ next_index = index; ++ prev_index = ra.prev_page; ++ last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT; ++ offset = *ppos & ~PAGE_CACHE_MASK; ++ ++ isize = i_size_read(inode); ++ if (!isize) ++ goto out; ++ ++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; ++ for (;;) { ++ struct page *page; ++ unsigned long nr, ret; ++ ++ /* nr is the maximum number of bytes to copy from this page */ ++ nr = PAGE_CACHE_SIZE; ++ if (index >= end_index) { ++ if (index > end_index) ++ goto out; ++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; ++ if (nr <= offset) { ++ goto out; ++ } ++ } ++ nr = nr - offset; ++ ++ cond_resched(); ++ if (index == next_index) ++ next_index = page_cache_readahead(mapping, &ra, filp, ++ index, last_index - index); ++ ++find_page: ++ page = find_get_page(mapping, index); ++ if (unlikely(page == NULL)) { ++ handle_ra_miss(mapping, &ra, index); ++ goto no_cached_page; ++ } ++ if (!PageUptodate(page)) ++ goto page_not_up_to_date; ++page_ok: ++ ++ /* If users can be writing to this page using arbitrary ++ * virtual addresses, take care about potential aliasing ++ * before reading the page on the kernel side. ++ */ ++ if (mapping_writably_mapped(mapping)) ++ flush_dcache_page(page); ++ ++ /* ++ * When (part of) the same page is read multiple times ++ * in succession, only mark it as accessed the first time. ++ */ ++ if (prev_index != index) ++ mark_page_accessed(page); ++ prev_index = index; ++ ++ /* ++ * Ok, we have the page, and it's up-to-date, so ++ * now we can copy it to user space... ++ * ++ * The actor routine returns how many bytes were actually used.. ++ * NOTE! This may not be the same as how much of a user buffer ++ * we filled up (we may be padding etc), so we can only update ++ * "pos" here (the actor routine has to update the user buffer ++ * pointers and the remaining count). ++ */ ++ ret = actor(desc, page, offset, nr); ++ offset += ret; ++ index += offset >> PAGE_CACHE_SHIFT; ++ offset &= ~PAGE_CACHE_MASK; ++ ++ page_cache_release(page); ++ if (ret == nr && desc->count) ++ continue; ++ goto out; ++ ++page_not_up_to_date: ++ /* Get exclusive access to the page ... */ ++ lock_page(page); ++ ++ /* Did it get unhashed before we got the lock? */ ++ if (!page->mapping) { ++ unlock_page(page); ++ page_cache_release(page); ++ continue; ++ } ++ ++ /* Did somebody else fill it already? */ ++ if (PageUptodate(page)) { ++ unlock_page(page); ++ goto page_ok; ++ } ++ ++readpage: ++ /* Start the actual read. The read will unlock the page. */ ++ error = mapping->a_ops->readpage(filp, page); ++ ++ if (unlikely(error)) ++ goto readpage_error; ++ ++ if (!PageUptodate(page)) { ++ lock_page(page); ++ if (!PageUptodate(page)) { ++ if (page->mapping == NULL) { ++ /* ++ * invalidate_inode_pages got it ++ */ ++ unlock_page(page); ++ page_cache_release(page); ++ goto find_page; ++ } ++ unlock_page(page); ++ error = -EIO; ++ goto readpage_error; ++ } ++ unlock_page(page); ++ } ++ ++ /* ++ * i_size must be checked after we have done ->readpage. ++ * ++ * Checking i_size after the readpage allows us to calculate ++ * the correct value for "nr", which means the zero-filled ++ * part of the page is not copied back to userspace (unless ++ * another truncate extends the file - this is desired though). ++ */ ++ isize = i_size_read(inode); ++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; ++ if (unlikely(!isize || index > end_index)) { ++ page_cache_release(page); ++ goto out; ++ } ++ ++ /* nr is the maximum number of bytes to copy from this page */ ++ nr = PAGE_CACHE_SIZE; ++ if (index == end_index) { ++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; ++ if (nr <= offset) { ++ page_cache_release(page); ++ goto out; ++ } ++ } ++ nr = nr - offset; ++ goto page_ok; ++ ++readpage_error: ++ /* UHHUH! A synchronous read error occurred. Report it */ ++ desc->error = error; ++ page_cache_release(page); ++ goto out; ++ ++no_cached_page: ++ /* ++ * Ok, it wasn't cached, so we need to create a new ++ * page.. ++ */ ++ if (!cached_page) { ++ cached_page = page_cache_alloc_cold(mapping); ++ if (!cached_page) { ++ desc->error = -ENOMEM; ++ goto out; ++ } ++ } ++ error = add_to_page_cache_lru(cached_page, mapping, ++ index, GFP_KERNEL); ++ if (error) { ++ if (error == -EEXIST) ++ goto find_page; ++ desc->error = error; ++ goto out; ++ } ++ page = cached_page; ++ cached_page = NULL; ++ goto readpage; ++ } ++ ++out: ++ *_ra = ra; ++ ++ *ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset; ++ if (cached_page) ++ page_cache_release(cached_page); ++ if (filp) ++ file_accessed(filp); ++} ++ ++int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size) ++{ ++ ssize_t written; ++ unsigned long count = desc->count; ++ struct file *file = desc->arg.data; ++ unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written; ++ void *ptr_from; ++ ++ if (size > count) ++ size = count; ++ ++ ptr_from = page_address(page)+offset; ++ written = memcpy(ptr_to,ptr_from,size); ++ ++ if (written < 0) { ++ desc->error = written; ++ written = 0; ++ } ++ desc->count = count - written; ++ desc->written += written; ++ return written; ++} ++ ++ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos, ++ size_t count, read_actor_t actor, void *TARGET) ++{ ++ read_descriptor_t desc; ++ ++ if (!count) ++ return 0; ++ ++ desc.written = 0; ++ desc.count = count; ++ desc.arg.data = TARGET; ++ desc.error = 0; ++ ++ do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor); ++ ++ if (desc.written) ++ return desc.written; ++ return desc.error; ++} ++static struct file_operations gemini_ipi_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = gemini_ipi_ioctl, ++ .open = gemini_ipi_open, ++ .release= gemini_ipi_release, ++ .write = gemini_ipi_write, ++ .read = gemini_ipi_read, ++ .sendfile = gemini_ipi_sendfile, ++}; ++ ++#ifndef STORLINK_IPI ++#define STORLINK_IPI 242 // Documents/devices.txt suggest to use 240~255 for local driver!! ++#endif ++ ++static struct miscdevice gemini_ipi_miscdev = ++{ ++ STORLINK_IPI, ++ "slave_ipc", ++ &gemini_ipi_fops ++}; ++ ++int __init sl_ipi_init(void) ++{ ++ ++ printk("Gemini IPI Driver Initialization...\n"); ++ printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE); ++ printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20); ++ printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); ++ ++ misc_register(&gemini_ipi_miscdev); ++ ++ if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL)) ++ printk("Error: Register IRQ for Storlink IPI failed\n"); ++ ++ return 0; ++} ++ ++void __exit sl_ipi_exit(void) ++{ ++ ++} ++ ++module_init(sl_ipi_init); ++module_exit(sl_ipi_exit); ++ ++MODULE_AUTHOR("Jason Lee <jason@storlink.com.tw>"); ++MODULE_DESCRIPTION("Storlink IPI driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/hw_xor.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/hw_xor.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,573 @@ ++/* ++* linux/include/asm-arm/xor.h ++* ++* Copyright (C) 2001 Storlink Semi. ++* Jason Lee <jason@storlink.com.tw> ++* ++*/ ++#include <asm/arch/sl2312.h> ++#include <asm/io.h> ++//#include <linux/compatmac.h> ++ ++#undef BIG_ENDIAN ++#define CPU 0 ++#define DMA 1 ++ ++#define DESC_NO 8 ++#define TX_DESC_NUM DESC_NO ++#define RX_DESC_NUM DESC_NO ++ ++#define RAID_BASE_ADDR IO_ADDRESS(SL2312_RAID_BASE) ++ ++#define SRAM_PAR_0k 0 ++#define SRAM_PAR_4k 1 ++#define SRAM_PAR_8k 2 ++#define SRAM_PAR_16k 3 ++#define SRAM_PAR_SIZE SRAM_PAR_8k ++ ++#define RUNNING 0x1 ++#define COMPLETE 0x2 ++#define ERROR 0x4 ++ ++#define CMD_XOR 0x0 ++#define CMD_FILL 0x1 ++#define CMD_CPY 0x3 ++#define CMD_CHK 0x4 ++ ++enum RAID_DMA_REGISTER { ++ RAID_DMA_DEVICE_ID = 0xff00, ++ RAID_DMA_STATUS = 0xff04, ++ RAID_FCHDMA_CTRL = 0xff08, ++ RAID_FCHDMA_FIRST_DESC = 0xff0C, ++ RAID_FCHDMA_CURR_DESC = 0xff10, ++ RAID_STRDMA_CTRL = 0xff14, ++ RAID_STRDMA_FIRST_DESC = 0xff18, ++ RAID_STRDMA_CURR_DESC = 0xff1C, ++ RAID_TX_FLG_REG = 0xff24, ++ RAID_RX_FLG_REG = 0xff34, ++ RAID_PCR = 0xff50, ++ SMC_CMD_REG = 0xff60, ++ SMC_STATUS_REG = 0xff64 ++ }; ++ ++enum RAID_FUNC_MODE { ++ RAID_XOR = 0, ++ RAID_MIX = 2, ++ RAID_SRAM = 3, ++ RAID_ENDIAN = 4, ++ RAID_MEM_BLK = 5, ++ RAID_MEM2MEM = 7, ++ RAID_BUF_SIZE = 8, ++ RAID_ERR_TEST = 9, ++ RAID_BURST = 10, ++ RAID_BUS = 11 ++ }; ++ ++typedef struct reg_info { ++ int mask; ++ char err[32]; ++ int offset; ++} REG_INFO; ++ ++/********************************************************/ ++/* the definition of RAID DMA Module Register */ ++/********************************************************/ ++typedef union ++{ ++ unsigned int bit32; ++ struct bits_ff00 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int : 8; ++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ ++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++ #else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ ++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ ++ unsigned int : 8; ++ #endif ++ } bits; ++} RAID_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff04 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int tsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ ++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ ++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ ++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ ++ unsigned int rsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ ++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ ++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ ++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ ++ unsigned int inter : 8; /* pattern check error interrupt */ ++ unsigned int : 5; ++ unsigned int Loopback : 1; /* loopback */ ++ unsigned int intEnable : 8; /*pattern check error interrupt enable */ ++ #else ++ unsigned int intEnable : 8; /*pattern check error interrupt enable */ ++ unsigned int Loopback : 1; /* loopback */ ++ unsigned int : 5; ++ unsigned int inter : 8; /* pattern check error interrupt */ ++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ ++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ ++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ ++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ ++ unsigned int rsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ ++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ ++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ ++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ ++ unsigned int tsFinishI : 1; /* owner bit error interrupt */ ++ #endif ++ } bits; ++} RAID_DMA_STATUS_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff08 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* DMA protection control */ ++ unsigned int td_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ #endif ++ } bits; ++} RAID_TXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff0c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++ #else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ #endif ++ } bits; ++} RAID_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff10 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++ #else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++} RAID_TXDMA_CURR_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff14 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ #endif ++ } bits; ++} RAID_RXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff18 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++ #else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ #endif ++ } bits; ++} RAID_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff1c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++ #else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++} RAID_RXDMA_CURR_DESC_T; ++ ++typedef union ++{ ++ unsigned int bit32; ++ struct bits_ff50 ++ { ++ unsigned int pat : 32; /* data for pattern check */ ++ } bits; ++} RAID_PACR_T; ++ ++/******************************************************/ ++/* the definition of DMA Descriptor Register */ ++/******************************************************/ ++typedef struct raid_descriptor_t ++{ ++ union func_ctrl_t ++ { ++ unsigned int bit32; ++ struct bits_0000 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int own : 1; /* owner bit */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ ++ unsigned int desc_cnt : 6; ++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ ++ #else ++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_cnt : 6; ++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit */ ++ #endif ++ } bits; ++ } func_ctrl; ++ ++ union flg_status_t ++ { ++ unsigned int bits32; ++ struct bit_004 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int bcc : 16; ++ unsigned int : 13 ++ unsigned int mode : 3; ++ #else ++ unsigned int mode : 3; ++ unsigned int : 13; ++ unsigned int bcc : 16; ++ #endif ++ } bits_cmd_status; ++ } flg_status; //Sanders ++ ++ unsigned int buf_addr; ++ ++ union next_desc_addr_t ++ { ++ unsigned int bits32; ++ struct bits_000c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ ++ #else ++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++ } next_desc_addr; ++} RAID_DESCRIPTOR_T; ++ ++/******************************************************/ ++/* the offset of RAID SMC register */ ++/******************************************************/ ++enum RAID_SMC_REGISTER { ++ RAID_SMC_CMD_REG = 0xff60, ++ RAID_SMC_STATUS_REG = 0xff64 ++ }; ++ ++/******************************************************/ ++/* the definition of RAID SMC module register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff60 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int pat_mode : 2; /* partition mode selection */ ++ unsigned int : 14; ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++ #else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int : 14; ++ unsigned int pat_mode : 2; /* partition mode selection */ ++ #endif ++ } bits; ++} RAID_SMC_CMD; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff64 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ ++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ ++ unsigned int : 14; ++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ ++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ ++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ ++ unsigned int : 14; ++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ ++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ ++ #endif ++ } bits; ++} RAID_SMC_STATUS; ++ ++typedef struct RAID_S ++{ ++ const char *device_name; ++ wait_queue_head_t wait; ++ unsigned int busy; ++ int irq; ++ unsigned int status; ++ RAID_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address */ ++ RAID_DESCRIPTOR_T *rx_desc; /* point ot virtual RX descriptor address */ ++ RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */ ++ RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */ ++ RAID_DESCRIPTOR_T *tx_finished_desc; ++ RAID_DESCRIPTOR_T *rx_finished_desc; ++ RAID_DESCRIPTOR_T *tx_first_desc; ++ RAID_DESCRIPTOR_T *rx_first_desc; ++ ++// unsigned int *tx_buf[TX_DESC_NUM]; ++ unsigned int *rx_desc_dma; // physical address of rx_descript ++ unsigned int *tx_desc_dma; // physical address of tx_descript ++ unsigned int *rx_bufs_dma; ++ unsigned int *tx_bufs_dma; ++ ++} RAID_T; ++ ++struct reg_ioctl ++{ ++ unsigned int reg_addr; ++ unsigned int val_in; ++ unsigned int val_out; ++}; ++ ++typedef struct dma_ctrl { ++ int sram; ++ int prot; ++ int burst; ++ int bus; ++ int endian; ++ int mode; ++} DMA_CTRL; ++ ++ ++#ifdef XOR_SW_FILL_IN ++ ++#define __XOR(a1, a2) a1 ^= a2 ++ ++#define GET_BLOCK_2(dst) \ ++ __asm__("ldmia %0, {%1, %2}" \ ++ : "=r" (dst), "=r" (a1), "=r" (a2) \ ++ : "0" (dst)) ++ ++#define GET_BLOCK_4(dst) \ ++ __asm__("ldmia %0, {%1, %2, %3, %4}" \ ++ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ ++ : "0" (dst)) ++ ++#define XOR_BLOCK_2(src) \ ++ __asm__("ldmia %0!, {%1, %2}" \ ++ : "=r" (src), "=r" (b1), "=r" (b2) \ ++ : "0" (src)); \ ++ __XOR(a1, b1); __XOR(a2, b2); ++ ++#define XOR_BLOCK_4(src) \ ++ __asm__("ldmia %0!, {%1, %2, %3, %4}" \ ++ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ ++ : "0" (src)); \ ++ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) ++ ++#define PUT_BLOCK_2(dst) \ ++ __asm__ __volatile__("stmia %0!, {%2, %3}" \ ++ : "=r" (dst) \ ++ : "0" (dst), "r" (a1), "r" (a2)) ++ ++#define PUT_BLOCK_4(dst) \ ++ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ ++ : "=r" (dst) \ ++ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) ++ ++static void ++xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 4; ++ register unsigned int a1 __asm__("r4"); ++ register unsigned int a2 __asm__("r5"); ++ register unsigned int a3 __asm__("r6"); ++ register unsigned int a4 __asm__("r7"); ++ register unsigned int b1 __asm__("r8"); ++ register unsigned int b2 __asm__("r9"); ++ register unsigned int b3 __asm__("ip"); ++ register unsigned int b4 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_4(p1); ++ XOR_BLOCK_4(p2); ++ PUT_BLOCK_4(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 4; ++ register unsigned int a1 __asm__("r4"); ++ register unsigned int a2 __asm__("r5"); ++ register unsigned int a3 __asm__("r6"); ++ register unsigned int a4 __asm__("r7"); ++ register unsigned int b1 __asm__("r8"); ++ register unsigned int b2 __asm__("r9"); ++ register unsigned int b3 __asm__("ip"); ++ register unsigned int b4 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_4(p1); ++ XOR_BLOCK_4(p2); ++ XOR_BLOCK_4(p3); ++ PUT_BLOCK_4(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 2; ++ register unsigned int a1 __asm__("r8"); ++ register unsigned int a2 __asm__("r9"); ++ register unsigned int b1 __asm__("ip"); ++ register unsigned int b2 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_2(p1); ++ XOR_BLOCK_2(p2); ++ XOR_BLOCK_2(p3); ++ XOR_BLOCK_2(p4); ++ PUT_BLOCK_2(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 2; ++ register unsigned int a1 __asm__("r8"); ++ register unsigned int a2 __asm__("r9"); ++ register unsigned int b1 __asm__("ip"); ++ register unsigned int b2 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_2(p1); ++ XOR_BLOCK_2(p2); ++ XOR_BLOCK_2(p3); ++ XOR_BLOCK_2(p4); ++ XOR_BLOCK_2(p5); ++ PUT_BLOCK_2(p1); ++ } while (--lines); ++} ++#endif //XOR_SW_FILL_IN ++ +Index: linux-2.6.23.16/arch/arm/mach-sl2312/irq.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/irq.c 2008-03-14 11:58:14.702460322 +0200 +@@ -0,0 +1,202 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/irq.c ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/stddef.h> ++#include <linux/list.h> ++#include <linux/sched.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/io.h> ++#include <asm/mach/irq.h> ++#include <asm/arch/platform.h> ++#include <asm/arch/int_ctrl.h> ++ ++#ifdef CONFIG_PCI ++#include <asm/arch/pci.h> ++#endif ++ ++int fixup_irq(unsigned int irq) ++{ ++#ifdef CONFIG_PCI ++ if (irq == IRQ_PCI) { ++ return sl2312_pci_get_int_src(); ++ } ++#endif ++ return irq; ++} ++ ++static void sl2312_ack_irq(unsigned int irq) ++{ ++ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++} ++ ++static void sl2312_mask_irq(unsigned int irq) ++{ ++ unsigned int mask; ++ ++#ifdef CONFIG_PCI ++ if (irq >= PCI_IRQ_OFFSET) ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~IRQ_PCI_MASK ; ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET); ++ } ++ else ++#endif ++ if(irq >= FIQ_OFFSET) ++ { ++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~(1 << (irq - FIQ_OFFSET)); ++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ else ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~(1 << irq); ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ ++} ++ ++static void sl2312_unmask_irq(unsigned int irq) ++{ ++ unsigned int mask; ++ ++#ifdef CONFIG_PCI ++ if (irq >= PCI_IRQ_OFFSET) ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= IRQ_PCI_MASK ; ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET); ++ } ++ else ++#endif ++ if(irq >= FIQ_OFFSET) ++ { ++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= (1 << (irq - FIQ_OFFSET)); ++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ else ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= (1 << irq); ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++} ++ ++static struct irq_chip sl2312_level_irq = { ++ .ack = sl2312_mask_irq, ++ .mask = sl2312_mask_irq, ++ .unmask = sl2312_unmask_irq, ++// .set_type = ixp4xx_set_irq_type, ++}; ++ ++static struct irq_chip sl2312_edge_irq = { ++ .ack = sl2312_ack_irq, ++ .mask = sl2312_mask_irq, ++ .unmask = sl2312_unmask_irq, ++// .set_type = ixp4xx_set_irq_type, ++}; ++ ++static struct resource irq_resource = { ++ .name = "irq_handler", ++ .start = IO_ADDRESS(SL2312_INTERRUPT_BASE), ++ .end = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4, ++}; ++ ++void __init sl2312_init_irq(void) ++{ ++ unsigned int i, mode, level; ++ ++ request_resource(&iomem_resource, &irq_resource); ++ ++ for (i = 0; i < NR_IRQS; i++) ++ { ++ if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX)) ++ { ++ set_irq_chip(i, &sl2312_edge_irq); ++ set_irq_handler(i, handle_edge_irq); ++ } ++ else ++ { ++ set_irq_chip(i, &sl2312_level_irq); ++ set_irq_handler(i,handle_level_irq); ++ } ++ set_irq_flags(i, IRQF_VALID | IRQF_PROBE); ++ } ++ ++ /* Disable all interrupt */ ++ __raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ __raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++ /* Set interrupt mode */ ++ /* emac & ipsec type is level trigger and high active */ ++ mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++ mode &= ~IRQ_GMAC0_MASK; ++ level &= ~IRQ_GMAC0_MASK; ++ ++ mode &= ~IRQ_GMAC1_MASK; ++ level &= ~IRQ_GMAC1_MASK; ++ ++ mode &= ~IRQ_IPSEC_MASK; ++ level &= ~IRQ_IPSEC_MASK; ++ ++ // for IDE0,1, high active and level trigger ++ mode &= ~IRQ_IDE0_MASK; ++ level &= ~IRQ_IDE0_MASK; ++ mode &= ~IRQ_IDE1_MASK; ++ level &= ~IRQ_IDE1_MASK; ++ ++ ++ // for PCI, high active and level trigger ++ mode &= ~IRQ_PCI_MASK; ++ level &= ~IRQ_PCI_MASK; ++ ++ // for USB, high active and level trigger ++ mode &= ~IRQ_USB0_MASK; ++ level &= ~IRQ_USB0_MASK; ++ ++ mode &= ~IRQ_USB1_MASK; ++ level &= ~IRQ_USB1_MASK; ++ ++ // for LPC, high active and edge trigger ++ mode |= 0xffff0000; ++ level &= 0x0000ffff; ++ ++ // for GPIO, high active and level trigger ++ mode &= ~(IRQ_GPIO_MASK); ++ level &= ~(IRQ_GPIO_MASK); ++ ++ mode &= ~(IRQ_GPIO1_MASK); ++ level &= ~(IRQ_GPIO1_MASK); ++ ++ mode &= ~(IRQ_GPIO2_MASK); ++ level &= ~(IRQ_GPIO2_MASK); ++ ++ __raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ __raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++} +Index: linux-2.6.23.16/arch/arm/mach-sl2312/lpc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/lpc.c 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,125 @@ ++/* ++ * ++ * BRIEF MODULE DESCRIPTION ++ * ITE Semi IT8712 Super I/O functions. ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * Author: MontaVista Software, Inc. ++ * ppopov@mvista.com or source@mvista.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <asm/io.h> ++#include <asm/types.h> ++#include <asm/arch/it8712.h> ++#include <linux/init.h> ++#include <asm/arch/hardware.h> ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++ ++// MB PnP configuration register ++#define LPC_KEY_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e) ++#define LPC_DATA_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f) ++ ++#define LPC_BUS_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0) ++#define LPC_BUS_STATUS *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2) ++#define LPC_SERIAL_IRQ_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4) ++ ++int it8712_exist; ++ ++static void LPCEnterMBPnP(void) ++{ ++ int i; ++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; ++ ++ for (i = 0; i<4; i++) ++ outb(key[i], LPC_KEY_ADDR); ++ ++} ++ ++static void LPCExitMBPnP(void) ++{ ++ outb(0x02, LPC_KEY_ADDR); ++ outb(0x02, LPC_DATA_ADDR); ++} ++ ++void LPCSetConfig(char LdnNumber, char Index, char data) ++{ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ outb(0x07, LPC_KEY_ADDR); ++ outb(LdnNumber, LPC_DATA_ADDR); ++ outb(Index, LPC_KEY_ADDR); ++ outb(data, LPC_DATA_ADDR); ++ LPCExitMBPnP(); ++} ++ ++char LPCGetConfig(char LdnNumber, char Index) ++{ ++ char rtn; ++ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ outb(0x07, LPC_KEY_ADDR); ++ outb(LdnNumber, LPC_DATA_ADDR); ++ outb(Index, LPC_KEY_ADDR); ++ rtn = inb(LPC_DATA_ADDR); ++ LPCExitMBPnP(); ++ return rtn; ++} ++ ++static int SearchIT8712(void) ++{ ++ unsigned char Id1, Id2; ++ unsigned short Id; ++ ++ LPCEnterMBPnP(); ++ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */ ++ Id1 = inb(LPC_DATA_ADDR); ++ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */ ++ Id2 = inb(LPC_DATA_ADDR); ++ Id = (Id1 << 8) | Id2; ++ LPCExitMBPnP(); ++ if (Id == 0x8712) ++ return TRUE; ++ else ++ return FALSE; ++} ++ ++int InitLPCInterface(void) ++{ ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ mdelay(1); // wait for 1 serial IRQ cycle ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ it8712_exist = SearchIT8712(); ++ printk("IT8712 %s exist\n", it8712_exist?"":"doesn't"); ++ return 0; ++} ++ ++//__initcall(InitLPCInterface); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/mm.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/mm.c 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,80 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/mm.c ++ * ++ * MM routines for Altera'a Epxa10db board ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/init.h> ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/pgtable.h> ++#include <asm/page.h> ++#include <asm/sizes.h> ++ ++#include <asm/mach/map.h> ++ ++/* Page table mapping for I/O region */ ++static struct map_desc sl2312_io_desc[] __initdata = { ++#ifdef CONFIG_GEMINI_IPI ++{__phys_to_virt(CPU_1_MEM_BASE), __phys_to_pfn(CPU_1_MEM_BASE), SZ_64M, MT_MEMORY}, ++#endif ++{IO_ADDRESS(SL2312_SRAM_BASE), __phys_to_pfn(SL2312_SRAM_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GLOBAL_BASE), __phys_to_pfn(SL2312_GLOBAL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_WAQTCHDOG_BASE), __phys_to_pfn(SL2312_WAQTCHDOG_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_UART_BASE), __phys_to_pfn(SL2312_UART_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_TIMER_BASE), __phys_to_pfn(SL2312_TIMER_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LCD_BASE), __phys_to_pfn(SL2312_LCD_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_RTC_BASE), __phys_to_pfn(SL2312_RTC_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SATA_BASE), __phys_to_pfn(SL2312_SATA_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LPC_HOST_BASE), __phys_to_pfn(SL2312_LPC_HOST_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LPC_IO_BASE), __phys_to_pfn(SL2312_LPC_IO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_INTERRUPT_BASE), __phys_to_pfn(SL2312_INTERRUPT_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_INTERRUPT1_BASE), __phys_to_pfn(SL2312_INTERRUPT1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SSP_CTRL_BASE), __phys_to_pfn(SL2312_SSP_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_POWER_CTRL_BASE), __phys_to_pfn(SL2312_POWER_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_CIR_BASE), __phys_to_pfn(SL2312_CIR_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE), __phys_to_pfn(SL2312_GPIO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE1), __phys_to_pfn(SL2312_GPIO_BASE1), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE2), __phys_to_pfn(SL2312_GPIO_BASE2), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_PCI_IO_BASE), __phys_to_pfn(SL2312_PCI_IO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_PCI_MEM_BASE), __phys_to_pfn(SL2312_PCI_MEM_BASE), SZ_512K, MT_DEVICE}, ++#ifdef CONFIG_NET_SL351X ++{IO_ADDRESS(SL2312_TOE_BASE), __phys_to_pfn(SL2312_TOE_BASE) , SZ_512K, MT_DEVICE}, ++#endif ++{IO_ADDRESS(SL2312_GMAC0_BASE), __phys_to_pfn(SL2312_GMAC0_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GMAC1_BASE), __phys_to_pfn(SL2312_GMAC1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SECURITY_BASE), __phys_to_pfn(SL2312_SECURITY_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_IDE0_BASE), __phys_to_pfn(SL2312_IDE0_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_IDE1_BASE), __phys_to_pfn(SL2312_IDE1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_RAID_BASE), __phys_to_pfn(SL2312_RAID_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_FLASH_CTRL_BASE), __phys_to_pfn(SL2312_FLASH_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GENERAL_DMA_BASE), __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_USB0_BASE), __phys_to_pfn(SL2312_USB_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_USB1_BASE), __phys_to_pfn(SL2312_USB1_BASE), SZ_512K, MT_DEVICE}, ++{FLASH_VADDR(SL2312_FLASH_BASE), __phys_to_pfn(SL2312_FLASH_BASE), SZ_16M, MT_DEVICE}, ++}; ++ ++void __init sl2312_map_io(void) ++{ ++ iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc)); ++} +Index: linux-2.6.23.16/arch/arm/mach-sl2312/pci.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/pci.c 2008-03-14 12:56:27.401497897 +0200 +@@ -0,0 +1,359 @@ ++/* ++ * linux/arch/arm/mach-sl2312/pci_sl2312.c ++ * ++ * PCI functions for sl2312 host PCI bridge ++ * ++ * Copyright (C) 2003 StorLink Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include <linux/sched.h> ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/ptrace.h> ++#include <linux/slab.h> ++#include <linux/ioport.h> ++#include <linux/interrupt.h> ++#include <linux/spinlock.h> ++#include <linux/init.h> ++ ++#include <asm/sizes.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/mach/pci.h> ++#include <asm/mach/irq.h> ++#include <asm/mach-types.h> ++ ++#include <asm/arch/pci.h> ++ ++//#define DEBUG ++ ++// sl2312 PCI bridge access routines ++ ++#define PCI_IOSIZE_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE))) ++#define PCI_PROT_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04)) ++#define PCI_CTRL_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08)) ++#define PCI_SOFTRST_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10)) ++#define PCI_CONFIG_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28)) ++#define PCI_DATA_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C)) ++ ++static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED; ++// for initialize PCI devices ++struct resource pci_ioport_resource = { ++ .name = "PCI I/O Space", ++ .start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100, ++ .end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1, ++ .flags = IORESOURCE_IO, ++}; ++struct resource pci_iomem_resource = { ++ .name = "PCI Mem Space", ++ .start = SL2312_PCI_MEM_BASE, ++ .end = SL2312_PCI_MEM_BASE + SZ_128M - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val) ++{ ++ unsigned long addr,data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); ++ PCI_CONFIG_REG = addr; ++ data = PCI_DATA_REG; ++ ++ switch (size) { ++ case 1: ++ *val = (u8) (data >> ((where & 0x03) * 8)); ++ break; ++ case 2: ++ *val = (u16) (data >> ((where & 0x02) * 8)); ++ break; ++ case 4: ++ *val = data; ++ if ((where >= 0x10) && (where <= 0x24)) { ++ if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) { ++ *val &= 0x000fffff; ++ *val |= IO_ADDRESS(SL2312_PCI_IO_BASE); ++ } ++ } ++ break; ++ } ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++// printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val); ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val) ++{ ++ unsigned long addr,data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); ++ PCI_CONFIG_REG = addr; ++ data = PCI_DATA_REG; ++ ++ switch (size) { ++ case 1: ++ data &= ~(0xff << ((where & 0x03) * 8)); ++ data |= (val << ((where & 0x03) * 8)); ++ PCI_DATA_REG = data; ++ break; ++ case 2: ++ data &= ~(0xffff << ((where & 0x02) * 8)); ++ data |= (val << ((where & 0x02) * 8)); ++ PCI_DATA_REG = data; ++ break; ++ case 4: ++ if ((where >= 0x10) && (where <= 0x24)) { ++ if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) { ++ val &= 0x000fffff; ++ val |= SL2312_PCI_IO_BASE; ++ } ++ } ++ PCI_DATA_REG = val; ++ break; ++ } ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++ ++// printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val); ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops sl2312_pci_ops = { ++ .read = sl2312_read_config, ++ .write = sl2312_write_config, ++}; ++ ++ ++int __init sl2312_pci_setup_resources(struct resource **resource) ++{ ++ PCI_IOSIZE_REG = 0; // 1M IO size ++ PCI_CTRL_REG = 0x06; ++ ++ resource[0] = &pci_ioport_resource; ++ resource[1] = &pci_iomem_resource; ++ resource[2] = NULL; ++ ++ return 1; ++} ++ ++//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs) ++//{ ++// return 1; ++//} ++ ++ ++/********************************************************************** ++ * MASK(disable) PCI interrupt ++ * 0: PCI INTA, 1: PCI INTB, ... // for Linux interrupt routing ++ * 16: PERR // for PCI module internal use ++ * 17: SERR,.. respect to PCI CTRL2 REG ++ **********************************************************************/ ++void sl2312_pci_mask_irq(unsigned int irq) ++{ ++ struct pci_bus bus; ++ unsigned int tmp; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (irq < 16) { // for linux int routing ++ tmp &= ~(1 << (irq + 16 + 6)); ++ } ++ else { ++ tmp &= ~(1 << irq); ++ } ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++} ++ ++/* UNMASK(enable) PCI interrupt */ ++void sl2312_pci_unmask_irq(unsigned int irq) ++{ ++ struct pci_bus bus; ++ unsigned int tmp; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (irq < 16) { // for linux int routing ++ tmp |= (1 << (irq + 16 + 6)); ++ } ++ else { ++ tmp |= (1 << irq); ++ } ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++} ++ ++/* Get PCI interrupt source */ ++int sl2312_pci_get_int_src(void) ++{ ++ struct pci_bus bus; ++ unsigned int tmp=0; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (tmp & (1 << 28)) { // PCI INTA ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTA; ++ } ++ if (tmp & (1 << 29)) { // PCI INTB ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTB; ++ } ++ if (tmp & (1 << 30)) { // PCI INTC ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTC; ++ } ++ if (tmp & (1 << 31)) { // PCI INTD ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTD; ++ } ++ // otherwise, it should be a PCI error ++ return IRQ_PCI; ++} ++ ++static irqreturn_t sl2312_pci_irq(int irq, void *devid) ++{ ++ struct irq_desc *desc; ++ struct irqaction *action; ++ int retval = 0; ++ ++ return 1; ++ ++ irq = sl2312_pci_get_int_src(); ++ desc = &irq_desc[irq]; ++ action = desc->action; ++ do { ++ retval |= action->handler(irq, devid); ++ action = action->next; ++ } while (action); ++ ++ return 1; ++} ++ ++//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs); ++ ++void __init sl2312_pci_preinit(void) ++{ ++ struct pci_bus bus; ++ unsigned long flags; ++ unsigned int temp; ++ int ret; ++ ++ /* ++ * Hook in our fault handler for PCI errors ++ */ ++// external_fault = sl2312_pci_fault; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ ++ /* ++ * Grab the PCI interrupt. ++ */ ++ ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL); ++ if (ret) ++ printk(KERN_ERR "PCI: unable to grab PCI error " ++ "interrupt: %d\n", ret); ++ ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++ ++ // setup pci bridge ++ bus.number = 0; /* device 0, function 0 */ ++ temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16); ++ sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp); ++} ++ ++/* ++ * No swizzle on SL2312 ++ */ ++static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp) ++{ ++ return PCI_SLOT(dev->devfn); ++} ++ ++/* ++ * map the specified device/slot/pin to an IRQ. This works out such ++ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. ++ */ ++static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ int intnr = ((slot + (pin - 1)) & 3) + 4; /* the IRQ number of PCI bridge */ ++ ++ // printk("%s : slot = %d pin = %d \n",__func__,slot,pin); ++ switch (slot) ++ { ++ case 12: ++ if (pin==1) ++ { ++ intnr = 3; ++ } ++ else ++ { ++ intnr = 0; ++ } ++ break; ++ case 11: ++ intnr = (2 + (pin - 1)) & 3; ++ break; ++ case 10: ++ intnr = (1 + (pin - 1)) & 3; ++ break; ++ case 9: ++ intnr = (pin - 1) & 3; ++ break; ++ } ++// if (slot == 10) ++// intnr = (1 + (pin - 1)) & 3; ++// else if (slot == 9) ++// intnr = (pin - 1) & 3; ++ return (IRQ_PCI_INTA + intnr); ++} ++ ++struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata) ++{ ++ return (pci_scan_bus(0, &sl2312_pci_ops, sysdata)); ++ ++} ++ ++int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys) ++{ ++ int ret = 0; ++ ++ if (nr == 0) { ++ ret = sl2312_pci_setup_resources(sys->resource); ++ } ++ ++ return ret; ++} ++ ++ ++struct hw_pci sl2312_pci __initdata = { ++ .setup = sl2312_pci_setup, ++ .preinit = sl2312_pci_preinit, ++ .nr_controllers = 1, ++ .swizzle = sl2312_pci_swizzle, ++ .map_irq = sl2312_pci_map_irq, ++ .scan = sl2312_pci_scan_bus, ++}; ++ ++static int __init sl2312_pci_init(void) ++{ ++ if (machine_is_sl2312()) ++ pci_common_init(&sl2312_pci); ++ return 0; ++} ++ ++subsys_initcall(sl2312_pci_init); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg-1.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg-1.c 2008-03-15 16:53:18.340655940 +0200 +@@ -0,0 +1,64 @@ ++/* ++ * linux/arch/arm/mach-pxa/sl2312.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pm.h> ++#include <linux/device.h> ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <linux/platform_device.h> ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl2312_dmamask_1 = 0xffffffffUL; ++ ++static struct resource sl2312_otg_resources_1[] = { ++ [0] = { ++ .start = 0x69000000, ++ .end = 0x69000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USB1, ++ .end = IRQ_USB1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ehci_1_device = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl2312_dmamask_1, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), ++ .resource = sl2312_otg_resources_1, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++ &ehci_1_device, ++}; ++ ++static int __init sl2312_1_init(void) ++{ ++ return platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++subsys_initcall(sl2312_1_init); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg.c 2008-03-14 12:33:51.324219457 +0200 +@@ -0,0 +1,87 @@ ++/* ++ * linux/arch/arm/mach-pxa/sl2312.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pm.h> ++#include <linux/device.h> ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <linux/platform_device.h> ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl2312_dmamask = 0xffffffffUL; ++ ++static struct resource sl2312_otg_resources_1[] = { ++ [0] = { ++ .start = 0x68000000, ++ .end = 0x68000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USB0, ++ .end = IRQ_USB0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++static struct resource sl2312_otg_resources_2[] = { ++ [2] = { ++ .start = 0x69000000, ++ .end = 0x69000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [3] = { ++ .start = IRQ_USB1, ++ .end = IRQ_USB1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ehci_device_1 = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = 1, ++ .dev = { ++ .dma_mask = &sl2312_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), ++ .resource = sl2312_otg_resources_1, ++}; ++ ++static struct platform_device ehci_device_2 = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = 2, ++ .dev = { ++ .dma_mask = &sl2312_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_2), ++ .resource = sl2312_otg_resources_2, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++ &ehci_device_1, /* &ehci_device_2, */ ++}; ++ ++static int __init sl2312_init(void) ++{ ++ return platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++subsys_initcall(sl2312_init); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl3516_device.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl3516_device.c 2008-03-14 12:19:14.774267722 +0200 +@@ -0,0 +1,89 @@ ++/* ++ * linux/arch/arm/mach-2312/sl3516_device.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pm.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl3516_dmamask = 0xffffffffUL; ++ ++static struct resource sl3516_sata_resources[] = { ++ [0] = { ++ .start = 0x63400000, ++ .end = 0x63400040, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IDE1, ++ .end = IRQ_IDE1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device sata_device = { ++ .name = "lepus-sata", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl3516_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl3516_sata_resources), ++ .resource = sl3516_sata_resources, ++}; ++ ++static struct resource sl3516_sata0_resources[] = { ++ [0] = { ++ .start = 0x63000000, ++ .end = 0x63000040, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IDE0, ++ .end = IRQ_IDE0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device sata0_device = { ++ .name = "lepus-sata0", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl3516_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl3516_sata0_resources), ++ .resource = sl3516_sata0_resources, ++}; ++ ++static struct platform_device *sata_devices[] __initdata = { ++ &sata_device, ++ &sata0_device, ++}; ++ ++static int __init sl3516_init(void) ++{ ++ return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices)); ++} ++ ++subsys_initcall(sl3516_init); +Index: linux-2.6.23.16/arch/arm/mach-sl2312/time.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/time.c 2008-03-14 12:16:06.263525107 +0200 +@@ -0,0 +1,134 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/time.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <asm/io.h> ++#include <asm/system.h> ++#include <asm/leds.h> ++#include <asm/arch/hardware.h> ++#include <asm/mach/time.h> ++#define TIMER_TYPE (volatile unsigned int*) ++#include <asm/arch/timer.h> ++// #define FIQ_PLUS 1 ++ ++ ++/* ++ * IRQ handler for the timer ++ */ ++static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id) ++{ ++// unsigned int led; ++ // ...clear the interrupt ++#ifdef FIQ_PLUS ++ *((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++#else ++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++#endif ++ ++#if 0 ++ if(!(jiffies % HZ)) ++ { ++ led = jiffies / HZ; ++// printk("ticks %x \n", led); ++ } ++ do_leds(); ++ do_timer(regs); ++ do_profile(regs); ++#endif ++ timer_tick(); ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction sl2312_timer_irq = { ++ .name = "SL2312 Timer Tick", ++ .flags = IRQF_DISABLED | IRQF_TIMER, ++ .handler = sl2312_timer_interrupt, ++}; ++ ++unsigned long sl2312_gettimeoffset (void) ++{ ++ return 0L; ++} ++ ++/* ++ * Set up timer interrupt, and return the current time in seconds. ++ */ ++void __init sl2312_time_init(void) ++{ ++ // For clock rate adjusting ++ unsigned int tick_rate=0; ++ ++#ifdef CONFIG_SL3516_ASIC ++ unsigned int clock_rate_base = 130000000; ++ unsigned int reg_v=0; ++ ++ //--> Add by jason for clock adjust ++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS))); ++ reg_v >>= 15; ++ tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000); ++ ++ // FPGA use AHB bus tick rate ++ printk("Bus: %dMHz",tick_rate/1000000); ++ ++ tick_rate /= 6; // APB bus run AHB*(1/6) ++ ++ switch((reg_v>>3)&3){ ++ case 0: printk("(1/1)\n") ; ++ break; ++ case 1: printk("(3/2)\n") ; ++ break; ++ case 2: printk("(24/13)\n") ; ++ break; ++ case 3: printk("(2/1)\n") ; ++ break; ++ } ++ //<-- ++#else ++ printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000); // FPGA use 20MHz ++ tick_rate = CLOCK_TICK_RATE; ++#endif ++ ++ ++ /* ++ * Make irqs happen for the system timer ++ */ ++ // initialize timer interrupt ++ // low active and edge trigger ++#ifdef FIQ_PLUS ++ *((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++ *((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++ setup_irq(IRQ_TIMER1, &sl2312_timer_irq); ++ /* Start the timer */ ++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK); ++#else ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++ setup_irq(IRQ_TIMER2, &sl2312_timer_irq); ++ /* Start the timer */ ++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK); ++#endif ++ ++} ++ ++ +Index: linux-2.6.23.16/arch/arm/mach-sl2312/xor.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mach-sl2312/xor.c 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,1200 @@ ++/* ++ * arch/arm/mach-sl2312/xor.c ++ * ++ * Support functions for the Gemini Soc. This is ++ * a HW XOR unit that is specifically designed for use with RAID5 ++ * applications. This driver provides an interface that is used by ++ * the Linux RAID stack. ++ * ++ * Original Author: Jason Lee<jason@storlink.com.tw> ++ * ++ * Contributors:Sanders<sanders@storlink.com.tw> ++ Jason Lee<jason@storlink.com.tw> ++ * ++ * ++ * Maintainer: Jason Lee<jason@storlink.com.tw> ++ * ++ * Copyright (C) 2005 Storlink Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ++ * History: (06/25/2005, DJ) Initial Creation ++ * ++ * Versing 1.0.0 Initial version ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/sched.h> ++#include <linux/spinlock.h> ++#include <linux/slab.h> ++#include <linux/errno.h> ++#include <linux/interrupt.h> ++#include <linux/sched.h> ++#include <linux/wait.h> ++#include <linux/list.h> ++#include <linux/pci.h> ++#include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <linux/mm.h> ++#include <asm/irq.h> ++#include <asm/delay.h> ++#include <asm/uaccess.h> ++#include <asm/cacheflush.h> ++#include <asm/hardware.h> ++#include <asm/arch/xor.h> ++#include <asm/pci.h> ++#include <linux/version.h> ++ ++/* ++ * pick up local definitions ++ */ ++#define XOR_SW_FILL_IN ++#include "hw_xor.h" ++ ++ ++//#define XOR_DEBUG ++//#define XOR_TEST 1 ++#ifdef XOR_TEST ++#define TEST_ITERATION 1000 ++#define SPIN_WAIT 1 ++#endif ++#ifdef XOR_DEBUG ++#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args) ++#define DENTER() DPRINTK("Entered...\n"); ++#define DEXIT() DPRINTK("Exited...\n"); ++#else ++#define DPRINTK(s, args...) ++#define DENTER() ++#define DEXIT() ++#endif ++ ++//#define SPIN_WAIT ++ ++/* globals */ ++static RAID_T tp; ++static RAID_TXDMA_CTRL_T txdma_ctrl; ++RAID_RXDMA_CTRL_T rxdma_ctrl; ++ ++//#ifndef SPIN_WAIT ++static spinlock_t raid_lock; ++//#endif ++ ++static unsigned int tx_desc_virtual_base; ++static unsigned int rx_desc_virtual_base; ++RAID_DESCRIPTOR_T *tx_desc_ptr; ++RAID_DESCRIPTOR_T *rx_desc_ptr; ++ ++/* static prototypes */ ++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) ++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) ++ ++static int gemini_xor_init_desc(void); ++ ++static unsigned int raid_read_reg(unsigned int offset) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(RAID_BASE_ADDR + offset); ++ return (reg_val); ++} ++ ++static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask) ++{ ++ unsigned int reg_val; ++ unsigned int *addr; ++ ++ reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask); ++ addr = (unsigned int *)(RAID_BASE_ADDR + offset); ++ writel(reg_val,addr); ++ return; ++} ++ ++#ifndef SPIN_WAIT ++__inline__ void xor_queue_descriptor(void) ++{ ++ unsigned int flags,status=1; ++ ++ DPRINTK("Going to sleep"); ++ ++ while(status){ ++ yield(); ++ //schedule(); ++ spin_lock_irqsave(&raid_lock,flags); ++ status = tp.busy; ++ spin_unlock_irqrestore(&raid_lock, flags); ++ } ++// tp.status = COMPLETE; ++ DPRINTK("woken up!"); ++ ++} ++#endif ++ ++#ifdef SPIN_WAIT ++static void gemini_xor_isr(int d_n) ++#else ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs) ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs) ++#endif ++#endif ++{ ++ ++ unsigned int err; ++ RAID_DMA_STATUS_T dma_status; ++// RAID_DESCRIPTOR_T *rdesc,*tdesc; ++// unsigned int *paddr; ++ ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++#ifdef SPIN_WAIT ++ while( (dma_status.bits32& (1<<31) ) ==0 ){ ++ udelay(1); ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++ } ++ ++/* tdesc = tp.tx_first_desc; ++ rdesc = tp.rx_first_desc; ++ for(d_n;d_n>0;d_n--){ ++ if( tdesc->func_ctrl.bits.own == DMA ){ ++ paddr = tdesc; ++ printk("error tx desc:0x%x\n",*paddr++); ++ printk("error tx desc:0x%x\n",*paddr++); ++ printk("error tx desc:0s%x\n",*paddr++); ++ printk("error tx desc:0x%x\n",*paddr); ++ while(1); ++ } ++ tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ } ++ ++ if( rdesc->func_ctrl.bits.own == DMA ){ ++ paddr = rdesc; ++ printk("error rx desc:0x%x\n",*paddr++); ++ printk("error rx desc:0x%x\n",*paddr++); ++ printk("error rx desc:0s%x\n",*paddr++); ++ printk("error rx desc:0x%x\n",*paddr); ++ while(1); ++ } ++*/ ++#endif ++ ++ if(dma_status.bits32 & ((1<<31)|(1<<26))){ ++ // if no bug , we can turn off rx finish interrupt ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++ err = raid_read_reg(RAID_DMA_DEVICE_ID); ++ tp.busy = 0; ++ ++ if(err&0x00FF0000){ ++ tp.status = ERROR; ++ printk("XOR:<HW>%s error code %x\n",(err&0x00F00000)?"tx":"rx",err); ++ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#ifndef SPIN_WAIT ++ return IRQ_RETVAL(IRQ_HANDLED); ++#endif ++#endif ++ } ++ // 16~19 rx error code ++ // 20~23 tx error codd ++ ++ dma_status.bits.tsFinishI = 1; ++ dma_status.bits.rsFinishI = 1; ++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000); // clear INT ++ ++// printk("xor %d\n",d_n); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#ifndef SPIN_WAIT ++ return IRQ_RETVAL(IRQ_HANDLED); ++#endif ++#endif ++ } ++ ++ #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ #ifndef SPIN_WAIT ++ printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32); ++ return IRQ_RETVAL(IRQ_HANDLED); ++ #endif ++ #endif ++} ++ ++void ++xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ while(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield2\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_2(bytes,p1,p2); ++ return ; ++#else ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ wmb(); ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ wmb(); ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++// tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ if(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield3\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_3(bytes,p1,p2,p3); ++ return; ++#else ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x0000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript \n"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(3); ++#else ++ xor_queue_descriptor(); ++#endif ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ if(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("S\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_4(bytes,p1,p2,p3,p4); ++ return; ++#else ++ msleep(1); ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ consistent_sync(p4, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(4); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5) ++{ ++ ++ int status=0; ++ unsigned int flags; ++ ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ while(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield5\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_5(bytes,p1,p2,p3,p4,p5); ++ return; ++#else ++ msleep(1); ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ consistent_sync(p4, bytes, DMA_TO_DEVICE); ++ consistent_sync(p5, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p5); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ tp.tx_finished_desc = tp.tx_desc; // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(5); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++#ifdef XOR_TEST ++void ++raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes) ++{ ++ int status=0,i; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ *p1 = pattern; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = 4; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes; // bytes to fill ++ tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.rx_finished_desc = tp.rx_desc; ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ for(i=1; i<(bytes/sizeof(int)); i++) { ++ if(p1[0]!=p1[i]){ ++ printk("pattern set error!\n"); ++ while(1); ++ } ++ } ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++#endif ++ ++void ++raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes) ++{ ++ int status=0,i; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(to, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(from,bytes, DMA_TO_DEVICE); ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(from); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits32 = CMD_CPY; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(to); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++#ifdef XOR_TEST ++ for(i=1; i<(bytes/sizeof(int)); i++) { ++ if(to[i]!=from[i]){ ++ printk("pattern check error!\n"); ++ printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]); ++ while(1); ++ } ++ } ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++EXPORT_SYMBOL(raid_memcpy); ++ ++#ifdef XOR_TEST ++int ++raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes) ++{ ++ int status=0; ++ RAID_DMA_STATUS_T dma_status; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ status = ((pattern&0xFFFF)%bytes )/4; ++ p1[status] = pattern; ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0; ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes ; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits32 = CMD_CHK; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return -1; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++// raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++// dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++// if (dma_status.bits32 & (1<<15)) { ++ ++ if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) { ++ status = 1; ++// raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000); ++ } ++ else{ ++ status = 0; ++ } ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ return status ; ++} ++#endif ++ ++int __init gemini_xor_init(void) ++{ ++ unsigned int res; ++ unsigned int *paddr1,*paddr2,*paddr3,i; ++ unsigned volatile char *charact; ++ unsigned volatile short *two_char; ++ unsigned volatile int *four_char; ++ ++ // init descript ++ res = gemini_xor_init_desc(); ++ if(res) { ++ printk("Init RAID Descript Fail!!\n"); ++ return -res; ++ } ++ ++ tp.device_name = "Gemini XOR Acceleration"; ++ ++ // request irq ++#ifndef SPIN_WAIT ++ res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL); ++#endif ++ if(res){ ++ printk(KERN_ERR "%s: unable to request IRQ %d for " ++ "HW XOR %d\n", tp.device_name, IRQ_RAID, res); ++ return -EBUSY; ++ } ++ ++#ifdef XOR_TEST ++ ++RETEST: ++ paddr1 = kmalloc(0x1000,GFP_KERNEL); ++ paddr2 = kmalloc(0x1000,GFP_KERNEL); ++ paddr3 = kmalloc(0x1000,GFP_KERNEL); ++ for(i=0;i<TEST_ITERATION;i++) { ++ printk("XOR test round %d\n",i); ++ for(res=0;res<(0x1000)/sizeof(int);res++){ // prepare data pattern ++ paddr1[res]= readl(0xf62000ac); ++ paddr2[res]= readl(0xf62000ac); ++ } ++ for(res=0;res<0x1000/sizeof(int);res++){ // calculate xor by software ++ paddr3[res] = paddr1[res]^paddr2[res]; ++ } ++ xor_gemini_2(0x1000,paddr1,paddr2); // calculate xor by hw ++ for(res=0;res<0x1000/sizeof(int);res++){ // check error ++ if(paddr1[res]!=paddr3[res]){ ++ printk("XOR ERROR\n"); ++ printk("[%d][0x%x]=0x%x should be %x\n",res,&paddr1[res],paddr1[res],paddr3[res]); ++ while(1); ++ } ++ } ++ } ++ kfree(paddr1); ++ kfree(paddr2); ++ kfree(paddr3); ++ ++ ++ // memcpy test ++ paddr1 = kmalloc(0x4000,GFP_KERNEL); ++ for(i=0;i<TEST_ITERATION;i++) { ++ for(res=0;res<(0x4000)/sizeof(int);res++) ++ paddr1[res]= readl(0xf62000ac); ++ ++ printk("MEMCOPY round %d\n",i); ++ paddr2 = kmalloc(0x4000,GFP_KERNEL); ++ raid_memcpy(paddr2,paddr1,0x4000); ++ kfree(paddr2); ++ } ++ kfree(paddr1); ++ ++ // memset test ++ for(i=0;i<TEST_ITERATION;i++) { ++ raid_memset(paddr1,0xFFFFFFFF,0x4000); ++ res = readl(0xf62000ac); ++ printk("MEMFILL fill 0x%x round %d\n",res,i); ++ paddr1 = kmalloc(0x4000,GFP_KERNEL); ++ raid_memset(paddr1,res,0x4000); ++ raid_memset(paddr1,0x0,0x4000); ++ kfree(paddr1); ++ } ++ ++ paddr1 = kmalloc(0x4000,GFP_KERNEL); ++ for(i=0;i<TEST_ITERATION;i++){ ++ raid_memset(paddr1, i,0x4000); ++ printk("Pattern check same ? "); ++ res = raid_memchk(paddr1, i,0x4000); ++ printk("%s\n",res?"Fail":"OK"); ++ if(res) while(1); ++ ++ printk("Pattern check diff ? "); ++ res = raid_memchk(paddr1,readl(0xf62000ac),0x4000); ++ printk("%s\n",res?"OK":"Fail"); ++ if(!res) while(1); ++ } ++ kfree(paddr1); ++ ++ // SRAM test ++ raid_write_reg(RAID_PCR, 0,0x00000003); ++ for(i=0;i<TEST_ITERATION;i++) { ++ printk("SRAM test %d\n",i); ++ charact = 0xF7000000; ++ two_char = 0xF7000000; ++ four_char = 0xF7000000; ++ for(res=0;res<(16*1024)/sizeof(char);res++) { // 8-bit access ++ *charact++ = (unsigned char)res; ++ } ++ charact = 0xF7000000; ++ for(res=0;res<(16*1024)/sizeof(char);res++) { ++ if(*charact++ != (unsigned char)res){ ++ printk("SRAM data error(8)\n"); ++ while(1); ++ } ++ } ++ ++ for(res=0;res<(16*1024)/sizeof(short);res++) { // 16-bit access ++ *two_char++ = (unsigned short)res; ++ } ++ two_char = 0xF7000000; ++ for(res=0;res<(16*1024)/sizeof(short);res++) { ++ if(*two_char++ != (unsigned short)res){ ++ printk("SRAM data error(16)\n"); ++ while(1); ++ } ++ } ++ ++ for(res=0;res<(16*1024)/sizeof(int);res++) { // 32-bit access ++ *four_char++ = (unsigned int)res; ++ } ++ four_char = 0xF7000000; ++ for(res=0;res<(16*1024)/sizeof(int);res++) { ++ if(*four_char++ != (unsigned int)res){ ++ printk("SRAM data error(32)\n"); ++ while(1); ++ } ++ } ++ } ++ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003); ++ ++#endif ++ return 0; ++} ++ ++void __exit gemini_xor_exit(void) ++{ ++ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.tx_desc_dma); ++ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.rx_desc_dma); ++ free_irq(IRQ_RAID, NULL); ++} ++ ++ ++static int gemini_xor_init_desc(void) ++{ ++ unsigned int i; ++ dma_addr_t tx_first_desc_dma; ++ dma_addr_t rx_first_desc_dma; ++ RAID_DMA_STATUS_T dma_status; ++ ++ printk("Initial RAID Descripter...\n"); ++ ++ tp.tx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.tx_desc_dma); ++ tx_desc_virtual_base = (unsigned int)tp.tx_desc - (unsigned int)tp.tx_desc_dma; ++ memset(tp.tx_desc,0x00,TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T)); ++ ++ tp.rx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.rx_desc_dma); ++ rx_desc_virtual_base = (unsigned int)tp.rx_desc - (unsigned int)tp.rx_desc_dma; ++ memset(tp.rx_desc,0x00,RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T)); ++ printk("XOR:tx_desc = %08x\n",(unsigned int)tp.tx_desc); ++ printk("XOR:rx_desc = %08x\n",(unsigned int)tp.rx_desc); ++ printk("XOR:tx_desc_dma = %08x\n",(unsigned int)tp.tx_desc_dma); ++ printk("XOR:rx_desc_dma = %08x\n",(unsigned int)tp.rx_desc_dma); ++ ++ if ((tp.tx_desc == NULL) || (tp.rx_desc == NULL)) { ++ if (tp.tx_desc) ++ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.tx_desc_dma); ++ if (tp.rx_desc) ++ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.rx_desc_dma); ++ return -ENOMEM; ++ } ++ ++ tp.tx_cur_desc = tp.tx_desc; /* virtual address */ ++ tp.tx_finished_desc = tp.tx_desc; /* virtual address */ ++ tx_first_desc_dma = (dma_addr_t)tp.tx_desc_dma; /* physical address */ ++ for (i = 1; i < TX_DESC_NUM; i++) { ++ tp.tx_desc->func_ctrl.bits.own = CPU; ++ tp.tx_desc->func_ctrl.bits.buffer_size = 0; ++ tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T); ++// tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B; ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10; ++ tp.tx_desc = &tp.tx_desc[1]; ++ } ++ tp.tx_desc->func_ctrl.bits.own = DMA; ++ tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b; ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma; ++ tp.tx_first_desc = tp.tx_desc ; ++ ++ tp.rx_cur_desc = tp.rx_desc; /* virtual address */ ++ tp.rx_finished_desc = tp.rx_desc; /* virtual address */ ++ rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */ ++ for (i = 1; i < RX_DESC_NUM; i++) { ++ tp.rx_desc->func_ctrl.bits.own = DMA; ++ tp.rx_desc->func_ctrl.bits.buffer_size = 0; ++ tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T); ++// tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B; ++ tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10; ++ tp.rx_desc = &tp.rx_desc[1]; ++ } ++ tp.rx_desc->func_ctrl.bits.own = DMA; ++ tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b; ++ tp.rx_desc = tp.rx_cur_desc; ++ tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma; ++ tp.rx_first_desc = tp.rx_desc ; ++ tp.busy = 0; ++ tp.status = COMPLETE; ++ ++ // Partition SRAM size ++ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003); ++ ++ // config tx DMA controler ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; ++ txdma_ctrl.bits.td_continue = 1; ++ txdma_ctrl.bits.td_chain_mode = 1; ++ txdma_ctrl.bits.td_prot = 0; ++ txdma_ctrl.bits.td_burst_size = 1; ++ txdma_ctrl.bits.td_bus = 3; ++ txdma_ctrl.bits.td_endian = 0; ++ txdma_ctrl.bits.td_finish_en = 1; ++ txdma_ctrl.bits.td_fail_en = 1; ++ txdma_ctrl.bits.td_perr_en = 1; ++ txdma_ctrl.bits.td_eod_en = 0; // enable tx descript ++ txdma_ctrl.bits.td_eof_en = 0; ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF); ++ ++ // config rx DMA controler ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 0; ++ rxdma_ctrl.bits.rd_continue = 1; ++ rxdma_ctrl.bits.rd_chain_mode = 1; ++ rxdma_ctrl.bits.rd_prot = 0; ++ rxdma_ctrl.bits.rd_burst_size = 1; ++ rxdma_ctrl.bits.rd_bus = 3; ++ rxdma_ctrl.bits.rd_endian = 0; ++ rxdma_ctrl.bits.rd_finish_en = 0; ++ rxdma_ctrl.bits.rd_fail_en = 1; ++ rxdma_ctrl.bits.rd_perr_en = 1; ++ rxdma_ctrl.bits.rd_eod_en = 0; ++ rxdma_ctrl.bits.rd_eof_en = 0; ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF); ++ ++ // enable interrupt ++ dma_status.bits32 = 3; // enable RpInt ++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF); ++ ++ return 0; ++} ++ ++module_init(gemini_xor_init); ++module_exit(gemini_xor_exit); ++ +Index: linux-2.6.23.16/arch/arm/mm/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/mm/Kconfig 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/mm/Kconfig 2008-03-13 17:48:24.508798285 +0200 +@@ -187,6 +187,26 @@ + Say Y if you want support for the ARM926T processor. + Otherwise, say N. + ++###### for Storlink SoC ###### ++config CPU_FA526 ++ bool "FA526 processor" ++ depends on ARCH_SL2312 ++ default y ++ select CPU_32v4 ++ select CPU_ABRT_EV4 ++ select CPU_CACHE_FA ++ select CPU_CACHE_VIVT ++ select CPU_CP15_MMU ++ select CPU_COPY_FA ++ select CPU_TLB_FA ++ select CPU_FA_BTB ++ help ++ The FA526 is a version of the ARM9 compatible processor, but with smaller ++ instruction and data caches. It is used in Storlink Sword device family. ++ ++ Say Y if you want support for the FA526 processor. ++ Otherwise, say N. ++ + # ARM940T + config CPU_ARM940T + bool "Support ARM940T processor" if ARCH_INTEGRATOR +@@ -461,6 +481,9 @@ + config CPU_CACHE_VIPT + bool + ++config CPU_CACHE_FA ++ bool ++ + if MMU + # The copy-page model + config CPU_COPY_V3 +@@ -475,6 +498,12 @@ + config CPU_COPY_V6 + bool + ++config CPU_COPY_FA ++ bool ++ ++config CPU_FA_BTB ++ bool ++ + # This selects the TLB model + config CPU_TLB_V3 + bool +@@ -534,6 +563,14 @@ + config IO_36 + bool + ++config CPU_TLB_FA ++ bool ++ help ++ //TODO ++ Faraday ARM FA526 architecture, unified TLB with writeback cache ++ and invalidate instruction cache entry. Branch target buffer is also ++ supported. ++ + comment "Processor Features" + + config ARM_THUMB +@@ -600,7 +637,7 @@ + + config CPU_DCACHE_WRITETHROUGH + bool "Force write through D-cache" +- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE ++ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE + default y if CPU_ARM925T + help + Say Y here to use the data cache in writethrough mode. Unless you +Index: linux-2.6.23.16/arch/arm/mm/Makefile +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/mm/Makefile 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/mm/Makefile 2008-03-13 17:48:24.508798285 +0200 +@@ -32,6 +32,7 @@ + obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o + obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o + obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o ++obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o + + obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o + obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o +@@ -40,6 +41,7 @@ + obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o + obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o + obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o ++obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o + + obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o + obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o +@@ -47,6 +49,7 @@ + obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o + obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o + obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o ++obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o + + obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o + obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o +@@ -60,6 +63,7 @@ + obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o + obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o + obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o ++obj-$(CONFIG_CPU_FA526) += proc-fa526.o + obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o + obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o + obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o +Index: linux-2.6.23.16/arch/arm/mm/cache-fa.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mm/cache-fa.S 2008-03-13 18:01:19.552965535 +0200 +@@ -0,0 +1,400 @@ ++/* ++ * linux/arch/arm/mm/cache-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Processors: FA520 FA526 FA626 ++ * 03/31/2005 : Luke Lee created, modified from cache-v4wb.S ++ * 04/06/2005 : 1. Read CR0-1 and determine the cache size dynamically, ++ * to suit all Faraday CPU series ++ * 2. Fixed all functions ++ * 04/08/2005 : insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE ++ * 04/12/2005 : TODO: make this processor dependent or a self-modifying code to ++ * inline cache len/size info into the instructions, as reading cache ++ * size and len info in memory could cause another cache miss. ++ * 05/05/2005 : Modify fa_flush_user_cache_range to comply APCS. ++ * 05/19/2005 : Adjust for boundary conditions. ++ */ ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <asm/hardware.h> ++#include <asm/page.h> ++#include "proc-macros.S" ++ ++#define CACHE_DLINESIZE 16 ++#ifdef CONFIG_SL3516_ASIC ++#define CACHE_DSIZE 8192 ++#else ++#define CACHE_DSIZE 16384 ++#endif ++#define CACHE_ILINESIZE 16 ++#define CACHE_ISIZE 16384 ++ ++/* Luke Lee 04/06/2005 ins begin */ ++/* ++ * initialize_cache_info() ++ * ++ * Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to ++ * system register CR0-1 ++ * Destroyed register: r0, r1, r2, r3, ip ++ */ ++ .align ++ENTRY(fa_initialize_cache_info) ++ mov r3, #1 @ r3 always = 1 ++ adr ip, __fa_cache_ilen ++ ++ mrc p15, 0, r0, c0, c0, 1 ++ /* ILEN */ ++ and r1, r0, #3 @ bits [1:0] ++ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3) ++ mov r2, r3, lsl r1 @ r2 = 1<<r1 ++ str r2, [ip], #4 ++ /* ISIZE */ ++ mov r1, r0, lsr #6 @ bits [8:6] ++ and r1, r1, #7 ++ add r1, r1, #9 @ cache size is at least 512 bytes (2^9) ++ mov r2, r3, lsl r1 ++ str r2, [ip], #4 ++ /* DLEN */ ++ mov r1, r0, lsr #12 ++ and r1, r1, #3 @ bits [13:12] ++ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3) ++ mov r2, r3, lsl r1 @ r2 = 1<<r1 ++ str r2, [ip], #4 ++ /* DSIZE */ ++ mov r1, r0, lsr #18 @ bits [20:18] ++ and r1, r1, #7 ++ add r1, r1, #9 @ cache size is at least 512 bytes (2^9) ++ mov r2, r3, lsl r1 ++ str r2, [ip] ++ mov pc, lr ++ ++ /* Warning : Do not change the order ! Successive codes depends on this */ ++ .align ++ .globl __fa_cache_ilen, __fa_cache_isize, __fa_cache_dlen, __fa_cache_dsize ++__fa_cache_ilen: ++ .word 0 @ instruction cache line length ++__fa_cache_isize: ++ .word 0 @ instruction cache size ++__fa_cache_dlen: ++ .word 0 @ data cahce line length ++__fa_cache_dsize: ++ .word 0 @ data cache size ++ ++/* Luke Lee 04/06/2005 ins end */ ++ ++/* ++ * flush_user_cache_all() ++ * ++ * Clean and invalidate all cache entries in a particular address ++ * space. ++ */ ++ENTRY(fa_flush_user_cache_all) ++ /* FALLTHROUGH */ ++/* ++ * flush_kern_cache_all() ++ * ++ * Clean and invalidate the entire cache. ++ */ ++ENTRY(fa_flush_kern_cache_all) ++/* Luke Lee 04/06/2005 mod ok */ ++ mov ip, #0 ++ ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache ++#endif ++ ++__flush_whole_cache: ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ mov ip, #0 ++# ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache ++# else ++ mcr p15, 0, ip, c7,c14, 0 @ clean/invalidate D cache ++# endif ++#endif /*CONFIG_CPU_DCACHE_DISABLE*/ ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer ++#endif ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ ++/* Luke Lee 04/06/2005 que todo tofix : should iscratchpad and dscratchpad be invalidated ? */ ++ mov pc, lr ++ ++/* ++ * flush_user_cache_range(start, end, flags) ++ * ++ * Invalidate a range of cache entries in the specified ++ * address space. ++ * ++ * - start - start address (inclusive, page aligned) ++ * - end - end address (exclusive, page aligned) ++ * - flags - vma_area_struct flags describing address space ++ */ ++ENTRY(fa_flush_user_cache_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++ /* Luke Lee 04/07/2005 ins 1 */ ++ mov ip, #0 ++ sub r3, r1, r0 @ calculate total size ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ tst r2, #VM_EXEC @ executable region? ++ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache ++#endif ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ /* Luke Lee 04/06/2005 ins 2 mod 1 */ ++ cmp r3, #CACHE_DSIZE @ total size >= limit? ++ bhs __flush_whole_cache @ flush whole D cache ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry ++ ++ ++1: /* Luke Lee 04/06/2005 del 2 ins 5 */ ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++#else ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++#endif ++ /* Luke Lee 04/06/2005 mod 1 */ ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ tst r2, #VM_EXEC ++ /* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */ ++ mcreq p15, 0, r4, c7, c10, 4 @ drain write buffer ++#endif ++ ++ /* Luke Lee 04/06/2005 ins block */ ++#ifdef CONFIG_CPU_FA_BTB ++ tst r2, #VM_EXEC ++ mov ip, #0 ++ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++/* ++ * flush_kern_dcache_page(void *page) ++ * ++ * Ensure no D cache aliasing occurs, either with itself or ++ * the I cache ++ * ++ * - addr - page aligned address ++ */ ++ENTRY(fa_flush_kern_dcache_page) ++ add r1, r0, #PAGE_SZ ++ /* fall through */ ++ ++/* ++ * coherent_kern_range(start, end) ++ * ++ * Ensure coherency between the Icache and the Dcache in the ++ * region described by start. If you have non-snooping ++ * Harvard caches, you need to implement this function. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_coherent_kern_range) ++ /* fall through */ ++ ++/* ++ * coherent_user_range(start, end) ++ * ++ * Ensure coherency between the Icache and the Dcache in the ++ * region described by start. If you have non-snooping ++ * Harvard caches, you need to implement this function. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_coherent_user_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++ /* Luke Lee 04/06/2005 ins 3 mod 1 */ ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry ++ ++#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) ++1: /* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++#else ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++#endif ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry ++#endif ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */ ++ ++ mov ip, #0 ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ ++/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_inv_range(start, end) ++ * ++ * Invalidate (discard) the specified virtual address range. ++ * May not write back any entries. If 'start' or 'end' ++ * are not cache line aligned, those lines must be written ++ * back. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_dma_inv_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c6, 1 @ invalidate boundary D entry ++ ++ /* Luke Lee 04/06/2005 ins 4 mod 2 */ ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++ tst r0, #CACHE_DLINESIZE -1 ++ bic r0, r0, #CACHE_DLINESIZE -1 ++ ++//debug_Aaron ++ //mcrne p15, 0, r0, c7, c10, 1 @ clean boundary D entry ++ ++ /* Luke Lee 04/06/2005 mod 1 */ ++ /* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */ ++ ////tst r1, #CACHE_DLINESIZE -1 ++ //mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry ++ /* Luke Lee 04/06/2005 ins 1 */ ++#else ++ bic r0, r0, #CACHE_DLINESIZE -1 ++#endif ++ ++//debug_Aaron ++1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++//1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++ ++ /* Luke Lee 04/06/2005 mod 1 */ ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++ /* Luke Lee 04/06/2005 ins 1 */ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_clean_range(start, end) ++ * ++ * Clean (write back) the specified virtual address range. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_dma_clean_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c10, 1 @ clean boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry ++ ++ /* Luke Lee 04/06/2005 ins 4 mod 2 */ ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++ bic r0, r0, #CACHE_DLINESIZE - 1 ++ ++//debug_Aaron ++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry ++//1: mcr p15, 0, r0, c7, c14, 1 @ clean D entry ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++ /* Luke Lee 04/06/2005 ins 2 */ ++#endif ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_flush_range(start, end) ++ * ++ * Clean and invalidate the specified virtual address range. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ * ++ * This is actually the same as fa_coherent_kern_range() ++ */ ++ .globl fa_dma_flush_range ++ .set fa_dma_flush_range, fa_coherent_kern_range ++ ++ __INITDATA ++ ++ .type fa_cache_fns, #object ++ENTRY(fa_cache_fns) ++ .long fa_flush_kern_cache_all ++ .long fa_flush_user_cache_all ++ .long fa_flush_user_cache_range ++ .long fa_coherent_kern_range ++ .long fa_coherent_user_range ++ .long fa_flush_kern_dcache_page ++ .long fa_dma_inv_range ++ .long fa_dma_clean_range ++ .long fa_dma_flush_range ++ .size fa_cache_fns, . - fa_cache_fns +Index: linux-2.6.23.16/arch/arm/mm/copypage-fa.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mm/copypage-fa.S 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,106 @@ ++/* ++ * linux/arch/arm/lib/copypage-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ASM optimised string functions ++ * 05/18/2005 : Luke Lee created, modified from copypage-v4wb.S ++ */ ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <asm/asm-offsets.h> ++ ++ .text ++/* ++ * ARMv4 optimised copy_user_page for Faraday processors ++ * ++ * We flush the destination cache lines just before we write the data into the ++ * corresponding address. Since the Dcache is read-allocate, this removes the ++ * Dcache aliasing issue. The writes will be forwarded to the write buffer, ++ * and merged as appropriate. ++ * ++ * Note: We rely on all ARMv4 processors implementing the "invalidate D line" ++ * instruction. If your processor does not supply this, you have to write your ++ * own copy_user_page that does the right thing. ++ * ++ * copy_user_page(to,from,vaddr) ++ */ ++ .align 4 ++ENTRY(fa_copy_user_page) ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ /* Write through */ ++ stmfd sp!, {r4, lr} @ 2 ++ mov r2, #PAGE_SZ/32 @ 1 ++ ++ ldmia r1!, {r3, r4, ip, lr} @ 4 ++1: stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmia r1!, {r3, r4, ip, lr} @ 4+1 ++ subs r2, r2, #1 @ 1 ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmneia r1!, {r3, r4, ip, lr} @ 4 ++ bne 1b @ 1 ++ ++ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache ++ ldmfd sp!, {r4, pc} @ 3 ++#else ++ /* Write back */ ++ stmfd sp!, {r4, lr} @ 2 ++ mov r2, #PAGE_SZ/32 @ 1 ++ ++1: ldmia r1!, {r3, r4, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmia r1!, {r3, r4, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ subs r2, r2, #1 @ 1 ++ bne 1b ++ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB ++ ldmfd sp!, {r4, pc} @ 3 ++#endif ++ ++/* ++ * ARMv4 optimised clear_user_page ++ * ++ * Same story as above. ++ */ ++ .align 4 ++ENTRY(fa_clear_user_page) ++ str lr, [sp, #-4]! ++ mov r1, #PAGE_SZ/32 @ 1 ++ mov r2, #0 @ 1 ++ mov r3, #0 @ 1 ++ mov ip, #0 @ 1 ++ mov lr, #0 @ 1 ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ /* Write through */ ++1: stmia r0!, {r2, r3, ip, lr} @ 4 ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ subs r1, r1, #1 @ 1 ++ bne 1b @ 1 ++ ++ mcr p15, 0, r1, c7, c7, 0 @ flush ID cache ++ ldr pc, [sp], #4 ++#else ++ /* Write back */ ++1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ subs r1, r1, #1 @ 1 ++ bne 1b @ 1 ++ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB ++ ldr pc, [sp], #4 ++#endif ++ ++ __INITDATA ++ ++ .type fa_user_fns, #object ++ENTRY(fa_user_fns) ++ .long fa_clear_user_page ++ .long fa_copy_user_page ++ .size fa_user_fns, . - fa_user_fns +Index: linux-2.6.23.16/arch/arm/mm/init.c +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/mm/init.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/mm/init.c 2008-03-13 17:48:24.508798285 +0200 +@@ -23,6 +23,7 @@ + + #include <asm/mach/arch.h> + #include <asm/mach/map.h> ++#include <asm/arch/ipi.h> + + #include "mm.h" + +@@ -252,6 +253,11 @@ + initrd_end = initrd_start + phys_initrd_size; + } + #endif ++#ifdef CONFIG_GEMINI_IPI ++ printk("CPU ID:%d\n",getcpuid()); ++// reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000); //CPU0 space ++// reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE); //share memory ++#endif + + /* + * Finally, reserve any node zero regions. +Index: linux-2.6.23.16/arch/arm/mm/proc-fa526.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mm/proc-fa526.S 2008-03-14 14:59:46.823166907 +0200 +@@ -0,0 +1,407 @@ ++/* ++ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * ++ * These are the low level assembler for performing cache and TLB ++ * functions on the fa526. ++ * ++ * Written by : Luke Lee ++ */ ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <asm/assembler.h> ++#include <asm/pgtable.h> ++#include <asm/pgtable-hwdef.h> ++#include <asm/elf.h> ++#include <asm/hardware.h> ++#include <asm/page.h> ++#include <asm/ptrace.h> ++#include <asm/system.h> ++#include "proc-macros.S" ++ ++#define CACHE_DLINESIZE 16 ++ ++ .text ++/* ++ * cpu_fa526_proc_init() ++ */ ++ENTRY(cpu_fa526_proc_init) ++ /* MMU is already ON here, ICACHE, DCACHE conditionally disabled */ ++ ++ mov r0, #1 ++ nop ++ nop ++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR ++ nop ++ nop ++ ++ mrc p15, 0, r0, c1, c0, 0 @ read ctrl register ++ ++#ifdef CONFIG_CPU_FA_BTB ++ orr r0, r0, #CR_Z ++#else ++ bic r0, r0, #CR_Z ++#endif ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c10, 4 @ drain write buffer ++ nop ++ nop ++ bic r0, r0, #CR_W ++#else ++ orr r0, r0, #CR_W ++#endif ++#ifdef CONFIG_CPU_DCACHE_DISABLE ++ bic r0, r0, #CR_C ++#else ++ orr r0, r0, #CR_C ++#endif ++#ifdef CONFIG_CPU_ICACHE_DISABLE ++ bic r0, r0, #CR_I ++#else ++ orr r0, r0, #CR_I ++#endif ++ ++ nop ++ nop ++ mcr p15, 0, r0, c1, c0, 0 ++ nop ++ nop ++ ++ mov r5, lr ++ bl fa_initialize_cache_info @ destroy r0~r4 ++ mov pc, r5 @ return ++ ++ ++/* ++ * cpu_fa526_proc_fin() ++ */ ++ENTRY(cpu_fa526_proc_fin) ++ stmfd sp!, {lr} ++ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE ++ msr cpsr_c, ip ++ ++ bl fa_flush_kern_cache_all ++ mrc p15, 0, r0, c1, c0, 0 @ ctrl register ++ bic r0, r0, #0x1000 @ ...i............ ++ bic r0, r0, #0x000e @ ............wca. ++ mcr p15, 0, r0, c1, c0, 0 @ disable caches ++ ++ nop ++ nop ++ ldmfd sp!, {pc} ++ ++/* ++ * cpu_fa526_reset(loc) ++ * ++ * Perform a soft reset of the system. Put the CPU into the ++ * same state as it would be if it had been reset, and branch ++ * to what would be the reset vector. ++ * ++ * loc: location to jump to for soft reset ++ */ ++ .align 4 ++ENTRY(cpu_fa526_reset) ++ mov ip, #0 ++ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ++ mrc p15, 0, ip, c1, c0, 0 @ ctrl register ++ bic ip, ip, #0x000f @ ............wcam ++ bic ip, ip, #0x1100 @ ...i...s........ ++ ++ bic ip, ip, #0x0800 @ BTB off ++ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ++ nop ++ nop ++ mov pc, r0 ++ ++/* ++ * cpu_fa526_do_idle() ++ */ ++ .align 4 ++ENTRY(cpu_fa526_do_idle) ++ ++#ifdef CONFIG_CPU_FA_IDLE ++ nop ++ nop ++ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt (IDLE mode) ++#endif ++ mov pc, lr ++ ++ ++ENTRY(cpu_fa526_dcache_clean_area) ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry ++ add r0, r0, #CACHE_DLINESIZE ++ subs r1, r1, #CACHE_DLINESIZE ++ bhi 1b ++#endif ++#endif ++ mov pc, lr ++ ++ ++/* =============================== PageTable ============================== */ ++ ++/* ++ * cpu_fa526_switch_mm(pgd) ++ * ++ * Set the translation base pointer to be as described by pgd. ++ * ++ * pgd: new page tables ++ */ ++ .align 4 ++ ++ .globl fault_address ++fault_address: ++ .long 0 ++ ++ENTRY(cpu_fa526_switch_mm) ++ ++ mov ip, #0 ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache ++#else ++ mcr p15, 0, ip, c7, c14, 0 @ Clean and invalidate whole DCache ++#endif ++#endif /*CONFIG_CPU_DCACHE_DISABLE*/ ++ ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache ++#endif ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed ++ nop ++ nop ++#endif ++ bic r0, r0, #0xff @ clear bits [7:0] ++ bic r0, r0, #0x3f00 @ clear bits [13:8] ++ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer ++ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB ++ nop ++ nop ++ mov pc, lr ++ ++/* ++ * cpu_fa526_set_pte_ext(ptep, pte, ext) ++ * ++ * Set a PTE and flush it out ++ */ ++ .align 4 ++ENTRY(cpu_fa526_set_pte_ext) ++ str r1, [r0], #-2048 @ linux version ++ ++ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY ++ ++ bic r2, r1, #PTE_SMALL_AP_MASK ++ bic r2, r2, #PTE_TYPE_MASK ++ orr r2, r2, #PTE_TYPE_SMALL ++ ++ tst r1, #L_PTE_USER @ User? ++ orrne r2, r2, #PTE_SMALL_AP_URO_SRW ++ ++ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? ++ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW ++ ++ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? ++ movne r2, #0 ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ eor r3, r2, #0x0a @ C & small page? 1010 ++ tst r3, #0x0b @ 1011 ++ biceq r2, r2, #4 ++#endif ++ str r2, [r0] @ hardware version ++ ++ mov r2, #0 ++ mcr p15, 0, r2, c7, c10, 0 @ clean D cache all ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r2, c7, c10, 4 @ drain WB ++#endif ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r2, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ __INIT ++ ++ .type __fa526_setup, #function ++__fa526_setup: ++ /* On return of this routine, r0 must carry correct flags for CFG register */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 ++ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 ++ ++ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM ++ ++ mov r0, #1 ++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR ++ ++ mrc p15, 0, r0, c9, c1, 0 @ DScratchpad ++ bic r0, r0, #1 ++ mcr p15, 0, r0, c9, c1, 0 ++ mrc p15, 0, r0, c9, c1, 1 @ IScratchpad ++ bic r0, r0, #1 ++ mcr p15, 0, r0, c9, c1, 1 ++ ++ mov r0, #0 ++ mcr p15, 0, r0, c1, c1, 0 @ turn-off ECR ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All ++ nop ++ nop ++#endif ++ ++ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client ++ mcr p15, 0, r0, c3, c0 @ load domain access register ++ ++ mrc p15, 0, r0, c1, c0 @ get control register v4 ++ ldr r5, fa526_cr1_clear ++ bic r0, r0, r5 ++ ldr r5, fa526_cr1_set ++ orr r0, r0, r5 ++ ++#ifdef CONFIG_CPU_FA_BTB ++ orr r0, r0, #CR_Z ++#else ++ bic r0, r0, #CR_Z ++#endif ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++ mov r12, #0 ++ mcr p15, 0, r12, c7, c10, 4 @ drain write buffer ++ nop ++ nop ++ bic r0, r0, #CR_W @ .... .... .... 1... ++#else ++ orr r0, r0, #CR_W ++#endif ++ ++ mov pc, lr ++ .size __fa526_setup, . - __fa526_setup ++ ++ /* ++ * .RVI ZFRS BLDP WCAM ++ * ..11 0001 .111 1101 ++ * ++ */ ++ .type fa526_cr1_clear, #object ++ .type fa526_cr1_set, #object ++fa526_cr1_clear: ++ .word 0x3f3f ++fa526_cr1_set: ++ .word 0x317D ++ ++ __INITDATA ++ ++/* ++ * Purpose : Function pointers used to access above functions - all calls ++ * come through these ++ */ ++ .type fa526_processor_functions, #object ++fa526_processor_functions: ++ .word v4_early_abort ++ .word cpu_fa526_proc_init ++ .word cpu_fa526_proc_fin ++ .word cpu_fa526_reset ++ .word cpu_fa526_do_idle ++ .word cpu_fa526_dcache_clean_area ++ .word cpu_fa526_switch_mm ++ .word cpu_fa526_set_pte_ext ++ .size fa526_processor_functions, . - fa526_processor_functions ++ ++ .section ".rodata" ++ ++ .type cpu_arch_name, #object ++cpu_arch_name: ++ .asciz "armv4" ++ .size cpu_arch_name, . - cpu_arch_name ++ ++ .type cpu_elf_name, #object ++cpu_elf_name: ++ .asciz "v4" ++ .size cpu_elf_name, . - cpu_elf_name ++ ++ .type cpu_fa526_name, #object ++cpu_fa526_name: ++ .ascii "FA526" ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ .ascii "i" ++#endif ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ .ascii "d" ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ .ascii "(wt)" ++#else ++ .ascii "(wb)" ++#endif ++#endif ++ .ascii "\0" ++ .size cpu_fa526_name, . - cpu_fa526_name ++ ++ .align ++ ++ .section ".proc.info.init", #alloc, #execinstr ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++#define __PMD_SECT_BUFFERABLE 0 ++#else ++#define __PMD_SECT_BUFFERABLE PMD_SECT_BUFFERABLE ++#endif ++ ++ .type __fa526_proc_info,#object ++__fa526_proc_info: ++ .long 0x66015261 ++ .long 0xff01fff1 ++ .long PMD_TYPE_SECT | \ ++ __PMD_SECT_BUFFERABLE | \ ++ PMD_SECT_CACHEABLE | \ ++ PMD_BIT4 | \ ++ PMD_SECT_AP_WRITE | \ ++ PMD_SECT_AP_READ ++ .long PMD_TYPE_SECT | \ ++ PMD_BIT4 | \ ++ PMD_SECT_AP_WRITE | \ ++ PMD_SECT_AP_READ ++ b __fa526_setup ++ .long cpu_arch_name ++ .long cpu_elf_name ++ .long HWCAP_SWP | HWCAP_HALF ++ .long cpu_fa526_name ++ .long fa526_processor_functions ++ .long fa_tlb_fns ++ .long fa_user_fns ++ .long fa_cache_fns ++ .size __fa526_proc_info, . - __fa526_proc_info ++ ++ +Index: linux-2.6.23.16/arch/arm/mm/tlb-fa.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/arch/arm/mm/tlb-fa.S 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,96 @@ ++/* ++ * linux/arch/arm/mm/tlb-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ARM architecture version 4, Faraday variation. ++ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB) ++ * ++ * Processors: FA520 FA526 FA626 ++ * 03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S ++ * 05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated ++ * data cache entries when invalidating TLB entries. ++ */ ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <asm/asm-offsets.h> ++#include <asm/tlbflush.h> ++#include "proc-macros.S" ++ ++ ++/* ++ * flush_user_tlb_range(start, end, mm) ++ * ++ * Invalidate a range of TLB entries in the specified address space. ++ * ++ * - start - range start address ++ * - end - range end address ++ * - mm - mm_struct describing address space ++ */ ++ .align 4 ++ENTRY(fa_flush_user_tlb_range) ++ ++ vma_vm_mm ip, r2 ++ act_mm r3 @ get current->active_mm ++ eors r3, ip, r3 @ == mm ? ++ movne pc, lr @ no, we dont do anything ++ mov r3, #0 ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r3, c7, c10, 4 @ drain WB ++#endif ++ ++ vma_vm_flags r2, r2 ++ bic r0, r0, #0x0ff ++ bic r0, r0, #0xf00 ++ ++1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry ++ add r0, r0, #PAGE_SZ ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo -> bls ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ ++ENTRY(fa_flush_kern_tlb_range) ++ mov r3, #0 ++ ++ mcr p15, 0, r3, c7, c10, 0 @ clean Dcache all 06/03/2005 ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r3, c7, c10, 4 @ drain WB ++#endif ++ ++ bic r0, r0, #0x0ff ++ bic r0, r0, #0xf00 ++1: ++ mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry ++ add r0, r0, #PAGE_SZ ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo -> bls ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ ++ __INITDATA ++ ++ .type fa_tlb_fns, #object ++ENTRY(fa_tlb_fns) ++ .long fa_flush_user_tlb_range ++ .long fa_flush_kern_tlb_range ++ .long fa_tlb_flags ++ .size fa_tlb_fns, . - fa_tlb_fns +Index: linux-2.6.23.16/arch/arm/tools/mach-types +=================================================================== +--- linux-2.6.23.16.orig/arch/arm/tools/mach-types 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/arch/arm/tools/mach-types 2008-03-13 17:48:24.508798285 +0200 +@@ -208,7 +208,8 @@ + fester SA1100_FESTER FESTER 191 + gpi ARCH_GPI GPI 192 + smdk2410 ARCH_SMDK2410 SMDK2410 193 +-i519 ARCH_I519 I519 194 ++#i519 ARCH_I519 I519 194 ++sl2312 ARCH_SL2312 SL2312 194 + nexio SA1100_NEXIO NEXIO 195 + bitbox SA1100_BITBOX BITBOX 196 + g200 SA1100_G200 G200 197 +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/SL_gpio.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/SL_gpio.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,59 @@ ++#define GPIO_MINOR_LAST 31 ++#define GPIO_MAJOR 120 // Experiemental ++ ++#define GPIO_IRQ_NBR 12 ++ ++#define GPIOBASEADDR (IO_ADDRESS(0x021000000)) ++ ++#define GPIODATAOUTOFF 0x00 ++#define GPIODATAINOFF 0x04 ++#define GPIOPINDIROFF 0x08 ++#define GPIOPINBYPASSOFF 0x0C ++#define GPIODATASETOFF 0x10 ++#define GPIODATACLEAROFF 0x14 ++#define GPIOPINPULLENBOFF 0x18 ++#define GPIOPINPULLTPOFF 0x1C ++#define GPIOINTRENBOFF 0x20 ++#define GPIOINTRRAWSOFF 0x24 ++#define GPIOINTRMASKEDSTATEOFF 0x28 ++#define GPIOINTRMASKOFF 0x2C ++#define GPIOINTRCLEAROFF 0x30 ++#define GPIOINTRTRIGGEROFF 0x34 ++#define GPIOINTRBOTHOFF 0x38 ++#define GPIOINTRRISENEGOFF 0x3C ++#define GPIOBNCEENBOFF 0x40 ++#define GPIOBNCEPRESOFF 0x44 ++ ++#define GPIO_IOCTRL_SETDIR 0x20 ++#define GPIO_IOCTRL_SET 0x40 ++#define GPIO_IOCTRL_CLEAR 0x50 ++#define GPIO_IOCTRL_ENBINT 0x60 ++#define GPIO_IOCTRL_MASKINT 0x70 ++#define GPIO_IOCTRL_LVLTRIG 0x75 ++#define GPIO_IOCTRL_EDGINT 0x77 ++#define GPIO_IOCTRL_EDGPOLINT 0x78 ++#define GPIO_IOCTRL_BYPASS 0x30 ++#define GPIO_IOCTRL_PRESCLK 0x80 ++#define GPIO_IOCTRL_CLKVAL 0x90 ++#define GPIO_IOCTRL_PULLENB 0xA0 ++#define GPIO_IOCTRL_PULLTYPE 0xA8 ++ ++ ++#define GPIO_MAJOR 120 /* experimental MAJOR number */ ++ // Minor - 0 : 31 gpio pins ++ ++#define GPIO_SET 0x01 ++#define GPIO_CLEAR 0x01 ++ ++#define GPIO_INPUT 0 ++#define GPIO_OUTPUT 1 ++#define GPIO_EDGEINTR 0 ++#define GPIO_EDGESINGL 0 ++#define GPIO_EDGEBOTH 1 ++#define GPIO_POSITIVE 0 ++#define GPIO_ENBINT 1 ++#define GPIO_DISABLEMASK 1 ++#define GPIO_PULLDOWN 0 ++#define GPIO_PULLUP 1 ++#define GPIO_ENABLEPULL 1 ++#define GPIO_DISABLEPULL 0 +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/debug-macro.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/debug-macro.S 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,20 @@ ++/* linux/include/asm-arm/arch-ebsa110/debug-macro.S ++ * ++ * Debugging macro include header ++ * ++ * Copyright (C) 1994-1999 Russell King ++ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++**/ ++ ++ .macro addruart,rx ++ mov \rx, #0x42000000 ++ .endm ++ ++#define UART_SHIFT 2 ++#define FLOW_CONTROL ++#include <asm/hardware/debug-8250.S> +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/dma.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/dma.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,28 @@ ++/* ++ * linux/include/asm-arm/arch-camelot/dma.h ++ * ++ * Copyright (C) 1997,1998 Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H ++ ++#define MAX_DMA_ADDRESS 0xffffffff ++ ++#define MAX_DMA_CHANNELS 0 ++ ++#endif /* _ASM_ARCH_DMA_H */ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/entry-macro.S +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/entry-macro.S 2008-03-13 17:49:18.511875745 +0200 +@@ -0,0 +1,42 @@ ++/* ++ * include/asm-arm/arch-arm/entry-macro.S ++ * ++ * Low-level IRQ helper macros for ebsa110 platform. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++#include <asm/arch/platform.h> ++#include <asm/arch/int_ctrl.h> ++ ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ ldr \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE)) ++ ldr \irqnr,[\irqstat] ++ cmp \irqnr,#0 ++ beq 2313f ++ mov \tmp,\irqnr ++ mov \irqnr,#0 ++2312: ++ tst \tmp, #1 ++ bne 2313f ++ add \irqnr, \irqnr, #1 ++ mov \tmp, \tmp, lsr #1 ++ cmp \irqnr, #31 ++ bcc 2312b ++2313: ++ .endm ++ ++ .macro irq_prio_table ++ .endm ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/flash.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/flash.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,83 @@ ++#ifndef __ASM_ARM_ARCH_FLASH_H ++#define __ASM_ARM_ARCH_FLASH_H ++ ++#define FLASH_START SL2312_FLASH_BASE ++#define SFLASH_SIZE 0x00400000 ++#define SPAGE_SIZE 0x200 ++#define BLOCK_ERASE 0x50 ++#define BUFFER1_READ 0x54 ++#define BUFFER2_READ 0x56 ++#define PAGE_ERASE 0x81 ++#define MAIN_MEMORY_PAGE_READ 0x52 ++#define MAIN_MEMORY_PROGRAM_BUFFER1 0x82 ++#define MAIN_MEMORY_PROGRAM_BUFFER2 0x85 ++#define BUFFER1_TO_MAIN_MEMORY 0x83 ++#define BUFFER2_TO_MAIN_MEMORY 0x86 ++#define MAIN_MEMORY_TO_BUFFER1 0x53 ++#define MAIN_MEMORY_TO_BUFFER2 0x55 ++#define BUFFER1_WRITE 0x84 ++#define BUFFER2_WRITE 0x87 ++#define AUTO_PAGE_REWRITE_BUFFER1 0x58 ++#define AUTO_PAGE_REWRITE_BUFFER2 0x59 ++#define READ_STATUS 0x57 ++ ++#define MAIN_MEMORY_PAGE_READ_SPI 0xD2 ++#define BUFFER1_READ_SPI 0xD4 ++#define BUFFER2_READ_SPI 0xD6 ++#define READ_STATUS_SPI 0xD7 ++ ++#define FLASH_ACCESS_OFFSET 0x00000010 ++#define FLASH_ADDRESS_OFFSET 0x00000014 ++#define FLASH_WRITE_DATA_OFFSET 0x00000018 ++#define FLASH_READ_DATA_OFFSET 0x00000018 ++#define SERIAL_FLASH_CHIP1_EN 0x00010000 // 16th bit = 1 ++#define SERIAL_FLASH_CHIP0_EN 0x00000000 // 16th bit = 0 ++#define AT45DB321_PAGE_SHIFT 0xa ++#define AT45DB642_PAGE_SHIFT 0xb ++#define CONTINUOUS_MODE 0x00008000 ++ ++#define FLASH_ACCESS_ACTION_OPCODE 0x0000 ++#define FLASH_ACCESS_ACTION_OPCODE_DATA 0x0100 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS 0x0200 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA 0x0300 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0400 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA 0x0500 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA 0x0600 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 ++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0600 ++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 ++ ++#define M25P80_PAGE_SIZE 0x100 ++#define M25P80_SECTOR_SIZE 0x10000 ++ ++ ++//#define M25P80_BULK_ERASE 1 ++//#define M25P80_SECTOR_ERASE 2 ++//#define M25P80_SECTOR_SIZE 0x10000 ++ ++#define M25P80_WRITE_ENABLE 0x06 ++#define M25P80_WRITE_DISABLE 0x04 ++#define M25P80_READ_STATUS 0x05 ++#define M25P80_WRITE_STATUS 0x01 ++#define M25P80_READ 0x03 ++#define M25P80_FAST_READ 0x0B ++#define M25P80_PAGE_PROGRAM 0x02 ++#define M25P80_SECTOR_ERASE 0xD8 ++#define M25P80_BULK_ERASE 0xC7 ++#define FLASH_ERR_OK 0x0 ++ ++extern void address_to_page(__u32, __u16 *, __u16 *); ++extern void main_memory_page_read(__u8, __u16, __u16, __u8 *); ++extern void buffer_to_main_memory(__u8, __u16); ++extern void main_memory_to_buffer(__u8, __u16); ++extern void main_memory_page_program(__u8, __u16, __u16, __u8); ++extern void atmel_flash_read_page(__u32, __u8 *, __u32); ++extern void atmel_erase_page(__u8, __u16); ++extern void atmel_read_status(__u8, __u8 *); ++extern void atmel_flash_program_page(__u32, __u8 *, __u32); ++extern void atmel_buffer_write(__u8, __u16, __u8); ++extern void flash_delay(void); ++ ++extern int m25p80_sector_erase(__u32 address, __u32 schip_en); ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_cir.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_cir.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,102 @@ ++#ifndef _ASM_ARCH_CIR_H ++#define _ASM_ARCH_CIR_H ++#include <linux/ioctl.h> ++ ++#define VCR_KEY_POWER 0x613E609F ++#define TV1_KEY_POWER 0x40040100 ++#define TV1_KEY_POWER_EXT 0xBCBD ++#define RC5_KER_POWER 0x0CF3 ++ ++#define VCC_H_ACT_PER (16-1) ++#define VCC_L_ACT_PER (8-1) ++#define VCC_DATA_LEN (32-1) ++#define TV1_H_ACT_PER (8-1) ++#define TV1_L_ACT_PER (4-1) ++#define TV1_DATA_LEN (48-1) ++ ++#define VCC_BAUD 540 ++#define TV1_BAUD 430 ++#ifdef CONFIG_SL3516_ASIC ++#define EXT_CLK 60 ++#else ++#define EXT_CLK 20 ++#endif ++ ++#define NEC_PROTOCOL 0x0 ++#define RC5_PROTOCOL 0x1 ++#define VCC_PROTOCOL 0x0 ++#define TV1_PROTOCOL 0x01 ++ ++#ifndef SL2312_CIR_BASE ++#define SL2312_CIR_BASE 0x4C000000 ++#endif ++#define CIR_BASE_ADDR IO_ADDRESS(SL2312_CIR_BASE) ++#define STORLINK_CIR_ID 0x00010400 ++ ++#define CIR_IP_ID *(volatile unsigned int *)(CIR_BASE_ADDR + 0x00) ++#define CIR_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x04) ++#define CIR_STATUS_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x08) ++#define CIR_RX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C) ++#define CIR_RX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x10) ++#define CIR_PWR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x14) ++#define CIR_PWR_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x18) ++#define CIR_TX_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C) ++#define CIR_TX_FEQ_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x20) ++#define CIR_TX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x24) ++#define CIR_TX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x28) ++ ++ ++#ifndef SL2312_POWER_CTRL_BASE ++#define SL2312_POWER_CTRL_BASE 0x4B000000 ++#endif ++ ++#ifndef PWR_BASE_ADDR ++#define PWR_BASE_ADDR IO_ADDRESS(SL2312_POWER_CTRL_BASE) ++#endif ++#define PWR_CTRL_ID *(unsigned int*)(PWR_BASE_ADDR+0x00) ++#define PWR_CTRL_REG *(unsigned int*)(PWR_BASE_ADDR+0x04) ++#define PWR_STATUS_REG *(unsigned int*)(PWR_BASE_ADDR+0x08) ++ ++ ++#define BIT(x) (1<<x) ++#define TX_STATUS BIT(3) ++ ++#define PWR_STAT_CIR 0x10 ++#define PWR_STAT_RTC 0x20 ++#define PWR_STAT_PUSH 0x40 ++#define PWR_SHUTDOWN 0x01 ++ ++#define CARR_FREQ 38000 ++ ++struct cir_ioctl_data { ++ __u32 data; ++}; ++struct cir_ioctl_data48 { ++ __u32 timeout; ++ __u32 length; ++ __u8 ret; ++ __u32 data; ++ __u32 data_ext; ++}; ++#define OLD_DATA 0 ++#define NEW_RECEIVE 1 ++ ++#define CIR_IOCTL_BASE ('I'|'R') ++#define CIR_SET_BAUDRATE _IOW (CIR_IOCTL_BASE, 0, struct cir_ioctl_data) ++#define CIR_SET_HIGH_PERIOD _IOW (CIR_IOCTL_BASE, 1, struct cir_ioctl_data) ++#define CIR_SET_LOW_PERIOD _IOW (CIR_IOCTL_BASE, 2, struct cir_ioctl_data) ++#define CIR_SET_PROTOCOL _IOW (CIR_IOCTL_BASE, 3, struct cir_ioctl_data) ++#define CIR_SET_ENABLE_COMPARE _IOW (CIR_IOCTL_BASE, 4, struct cir_ioctl_data) ++#define CIR_SET_ENABLE_DEMOD _IOW (CIR_IOCTL_BASE, 5, struct cir_ioctl_data) ++#define CIR_SET_POWER_KEY _IOW (CIR_IOCTL_BASE, 6, struct cir_ioctl_data) ++#define CIR_GET_BAUDRATE _IOR (CIR_IOCTL_BASE, 7, struct cir_ioctl_data) ++#define CIR_GET_HIGH_PERIOD _IOR (CIR_IOCTL_BASE, 8 ,struct cir_ioctl_data) ++#define CIR_GET_LOW_PERIOD _IOR (CIR_IOCTL_BASE, 9 ,struct cir_ioctl_data) ++#define CIR_GET_PROTOCOL _IOR (CIR_IOCTL_BASE, 10, struct cir_ioctl_data) ++#define CIR_GET_ENABLE_COMPARE _IOR (CIR_IOCTL_BASE, 11, struct cir_ioctl_data) ++#define CIR_GET_ENABLE_DEMOD _IOR (CIR_IOCTL_BASE, 12, struct cir_ioctl_data) ++#define CIR_GET_POWER_KEY _IOR (CIR_IOCTL_BASE, 13, struct cir_ioctl_data) ++#define CIR_GET_DATA _IOWR (CIR_IOCTL_BASE, 14, struct cir_ioctl_data48) ++#define CIR_WAIT_INT_DATA _IOWR (CIR_IOCTL_BASE, 15, struct cir_ioctl_data48) ++ ++#endif //_ASM_ARCH_CIR_H +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_gpio.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_gpio.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,77 @@ ++/* ++ * FILE NAME gemini_gpio.h ++ * ++ * BRIEF MODULE DESCRIPTION ++ * Generic Gemini GPIO ++ * ++ * Author: Storlink Software [Device driver] ++ * Jason Lee <jason@storlink.com.tw> ++ * ++ * Copyright 2005 Storlink Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __GEMINI_GPIO_H ++#define __GEMINI_GPIO_H ++ ++#include <linux/ioctl.h> ++ ++#define STATUS_HIGH 1 ++#define STATUS_LOW 0 ++#define DIRECT_OUT 1 ++#define DIRECT_IN 0 ++ ++#define EDGE_TRIG 0 ++#define RISING_EDGE 0 ++#define FALL_EDGE 1 ++#define SINGLE_EDGE 0 ++#define BOTH_EDGE 1 ++ ++#define LEVEL_TRIG 1 ++#define HIGH_ACTIVE 0 ++#define LOW_ACTIVE 1 ++ ++struct gemini_gpio_ioctl_data { ++ __u32 pin; ++ __u8 status; // status or pin direction ++ // 0: status low or Input ++ // 1: status high or Output ++ ++ /* these member are used to config GPIO interrupt parameter */ ++ __u8 use_default; // if not sure ,set this argument 1 ++ __u8 trig_type; // 0/1:edge/level triger ? ++ __u8 trig_polar; // 0/1:rising/falling high/low active ? ++ __u8 trig_both; // 0/1:single/both detect both ? ++}; ++ ++#define GEMINI_GPIO_IOCTL_BASE 'Z' ++ ++#define GEMINI_SET_GPIO_PIN_DIR _IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data) ++#define GEMINI_SET_GPIO_PIN_STATUS _IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data) ++#define GEMINI_GET_GPIO_PIN_STATUS _IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data) ++#define GEMINI_WAIT_GPIO_PIN_INT _IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data) ++ ++ ++extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both); ++extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both); ++extern int free_gpio_irq(int bit); ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_i2s.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_i2s.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,169 @@ ++#ifndef __GEMINI_I2S_H__ ++#define __GEMINI_I2S_H__ ++#include <linux/ioctl.h> ++#include <linux/types.h> ++#include <asm/arch-sl2312/irqs.h> ++ ++typedef __u16 UINT16; ++typedef __u32 UINT32; ++typedef __u8 UINT8; ++typedef __u8 BOOL; ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) ++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) ++#define SSP_INT IRQ_SSP ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++/* define read/write register utility */ ++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) ++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) ++ ++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) ++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) ++ ++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) ++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) ++ ++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) ++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) ++ ++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) ++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) ++ ++#define SSP_GPIO_INT IRQ_GPIO ++ ++#ifndef CONFIG_SL3516_ASIC ++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin ++ ++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ ++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ ++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ ++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ ++#define GPIO_MISO_BIT 9 ++#else ++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin ++ ++//#if 0 ++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ ++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ ++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ ++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ ++//#define GPIO_MISO_BIT 29 ++//#else ++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ ++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ ++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ ++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ ++//#define GPIO_MISO_BIT 7 ++//#endif ++#endif ++ ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAWSTATE = 0x24, ++ GPIO_INT_MASKSTATE = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIGGER = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLARITY = 0x3C ++}; ++ ++typedef struct ++{ ++ UINT32 src_addr; ++ UINT32 dst_addr; ++ UINT32 llp; ++ UINT32 ctrl_size; ++ UINT32 owner; ++}DMA_LLP_t; ++ ++typedef struct ++{ ++ UINT32 owner; ++ UINT32 src_addr; ++ UINT32 ctrl_size; ++}IOCTL_LLP_t; ++ ++typedef unsigned char byte; ++typedef unsigned short word; ++typedef unsigned long dword; ++ ++/* DMA Registers */ ++#define DMA_INT 0x00000000 ++#define DMA_INT_TC 0x00000004 ++#define DMA_CFG 0x00000024 ++#define DMA_INT_TC_CLR 0x00000008 ++#define DMA_TC 0x00000014 ++#define DMA_CSR 0x00000024 ++#define DMA_SYNC 0x00000028 ++ ++#define DMA_CH2_CSR 0x00000140 ++#define DMA_CH2_CFG 0x00000144 ++#define DMA_CH2_SRC_ADDR 0x00000148 ++#define DMA_CH2_DST_ADDR 0x0000014c ++#define DMA_CH2_LLP 0x00000150 ++#define DMA_CH2_SIZE 0x00000154 ++ ++#define DMA_CH3_CSR 0x00000160 ++#define DMA_CH3_CFG 0x00000164 ++#define DMA_CH3_SRC_ADDR 0x00000168 ++#define DMA_CH3_DST_ADDR 0x0000016c ++#define DMA_CH3_LLP 0x00000170 ++#define DMA_CH3_SIZE 0x00000174 ++ ++#define SSP_DEVICE_ID 0x00 ++#define SSP_CTRL_STATUS 0x04 ++#define SSP_FRAME_CTRL 0x08 ++#define SSP_BAUD_RATE 0x0c ++#define SSP_FRAME_CTRL2 0x10 ++#define SSP_FIFO_CTRL 0x14 ++#define SSP_TX_SLOT_VALID0 0x18 ++#define SSP_TX_SLOT_VALID1 0x1c ++#define SSP_TX_SLOT_VALID2 0x20 ++#define SSP_TX_SLOT_VALID3 0x24 ++#define SSP_RX_SLOT_VALID0 0x28 ++#define SSP_RX_SLOT_VALID1 0x2c ++#define SSP_RX_SLOT_VALID2 0x30 ++#define SSP_RX_SLOT_VALID3 0x34 ++#define SSP_SLOT_SIZE0 0x38 ++#define SSP_SLOT_SIZE1 0x3c ++#define SSP_SLOT_SIZE2 0x40 ++#define SSP_SLOT_SIZE3 0x44 ++#define SSP_READ_PORT 0x48 ++#define SSP_WRITE_PORT 0x4c ++ ++ ++ ++#define SSP_I2S_INIT_BUF _IO ('q', 0x00) ++#define SSP_I2S_STOP_DMA _IO ('q', 0x01) ++#define SSP_I2S_FILE_LEN _IOW ('q', 0x2, int) ++/* ++#define SSP_GET_HOOK_STATUS _IOR ('q', 0xC0, int) ++#define SSP_GET_LINEFEED _IOR ('q', 0xC1, int) ++#define SSP_SET_LINEFEED _IOW ('q', 0xC2, int) ++#define SSP_GET_REG _IOWR ('q', 0xC3, struct Ssp_reg *) ++#define SSP_SET_REG _IOWR ('q', 0xC4, struct Ssp_reg *) ++#define SSP_GEN_OFFHOOK_TONE _IO ('q', 0xC5) ++#define SSP_GEN_BUSY_TONE _IO ('q', 0xC6) ++#define SSP_GEN_RINGBACK_TONE _IO ('q', 0xC7) ++#define SSP_GEN_CONGESTION_TONE _IO ('q', 0xC8) ++#define SSP_DISABLE_DIALTONE _IO ('q', 0xC9) ++#define SSP_PHONE_RING_START _IO ('q', 0xCA) ++*/ ++ ++ ++#endif //__GEMINI_I2S_H__ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_ssp.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_ssp.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,263 @@ ++/****************************************************************************** ++ * gemini_ssp.h ++ * ++ * ++ *****************************************************************************/ ++ ++#include <linux/types.h> ++#include <asm/arch-sl2312/irqs.h> ++#include <linux/phonedev.h> ++#include <linux/telephony.h> ++//#include "proslic.h" ++ ++typedef __u16 UINT16; ++typedef __u32 UINT32; ++typedef __u8 UINT8; ++typedef __u8 BOOL; ++ ++#define TRUE 1 ++#define FALSE 0 ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) ++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) ++#define SSP_INT IRQ_SSP ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++/* define read/write register utility */ ++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) ++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) ++ ++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) ++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) ++ ++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) ++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) ++ ++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) ++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) ++ ++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) ++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) ++ ++ ++#define SSP_GPIO_INT IRQ_GPIO ++ ++#ifndef CONFIG_SL3516_ASIC ++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin ++ ++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ ++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ ++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ ++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ ++#define GPIO_MISO_BIT 9 ++#else ++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin ++ ++//#if 0 ++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ ++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ ++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ ++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ ++//#define GPIO_MISO_BIT 29 ++//#else ++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ ++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ ++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ ++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ ++//#define GPIO_MISO_BIT 7 ++//#endif ++#endif ++ ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAWSTATE = 0x24, ++ GPIO_INT_MASKSTATE = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIGGER = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLARITY = 0x3C ++}; ++ ++ ++#define SPI_ADD_LEN 7 // bits of Address ++#define SPI_DAT_LEN 8 // bits of Data ++ ++ ++ ++//#ifdef MIDWAY_DIAG ++#define DAISY_MODE 1 ++#if (DAISY_MODE==1) ++#define NUMBER_OF_CHAN 2 ++#else ++#define NUMBER_OF_CHAN 1 ++#endif ++#define LLP_SIZE 8 ++#define SBUF_SIZE 512 //0xff0 //2560 ++#define DBUF_SIZE SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560 ++#define TBUF_SIZE (LLP_SIZE)*DBUF_SIZE ++#define DESC_NUM 1 ++#define DTMF_NUM 20 ++ ++/* define owner bit of SSP */ ++//data into SSP and transfer to AP==> SSP_Rx ++//data out of SSP and transfer to SLIC==> SSP_Tx ++#define CPU 0 ++#define DMA 1 ++ ++#define DMA_DEMO 0 ++#define DMA_NDEMO 1 ++//#define DMA_NONE 2 ++ ++enum exceptions { ++ PROSLICiNSANE, ++ TIMEoUTpOWERuP, ++ TIMEoUTpOWERdOWN, ++ POWERlEAK, ++ TIPoRrINGgROUNDsHORT, ++ POWERaLARMQ1, ++ POWERaLARMQ2, ++ POWERaLARMQ3, ++ POWERaLARMQ4, ++ POWERaLARMQ5, ++ OWERaLARMQ6, ++ CM_CAL_ERR ++}; ++ ++typedef struct ++{ ++ UINT32 src_addr; ++ UINT32 dst_addr; ++ UINT32 llp; ++ UINT32 ctrl_size; ++}DMA_LLP_t; ++ ++typedef struct { ++ unsigned int own ; ++ char *tbuf; ++ //UINT32 *LinkAddrT; ++ DMA_LLP_t LLPT[LLP_SIZE]; ++}DMA_Tx_t; ++ ++typedef struct { ++ unsigned int own ; ++ char *rbuf; ++ //UINT32 *LinkAddrR; ++ DMA_LLP_t LLPR[LLP_SIZE]; ++}DMA_Rx_t; ++ ++//typedef struct { ++// //UINT32 init_stat; ++// struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */ ++// struct phone_device p; ++// ++// ++//}SSP_SLIC; ++ ++ ++ ++/* DMA Registers */ ++#define DMA_INT 0x00000000 ++#define DMA_INT_TC 0x00000004 ++#define DMA_CFG 0x00000024 ++#define DMA_INT_TC_CLR 0x00000008 ++#define DMA_TC 0x00000014 ++#define DMA_CSR 0x00000024 ++#define DMA_SYNC 0x00000028 ++ ++#define DMA_CH2_CSR 0x00000140 ++#define DMA_CH2_CFG 0x00000144 ++#define DMA_CH2_SRC_ADDR 0x00000148 ++#define DMA_CH2_DST_ADDR 0x0000014c ++#define DMA_CH2_LLP 0x00000150 ++#define DMA_CH2_SIZE 0x00000154 ++ ++#define DMA_CH3_CSR 0x00000160 ++#define DMA_CH3_CFG 0x00000164 ++#define DMA_CH3_SRC_ADDR 0x00000168 ++#define DMA_CH3_DST_ADDR 0x0000016c ++#define DMA_CH3_LLP 0x00000170 ++#define DMA_CH3_SIZE 0x00000174 ++ ++#define SSP_DEVICE_ID 0x00 ++#define SSP_CTRL_STATUS 0x04 ++#define SSP_FRAME_CTRL 0x08 ++#define SSP_BAUD_RATE 0x0c ++#define SSP_FRAME_CTRL2 0x10 ++#define SSP_FIFO_CTRL 0x14 ++#define SSP_TX_SLOT_VALID0 0x18 ++#define SSP_TX_SLOT_VALID1 0x1c ++#define SSP_TX_SLOT_VALID2 0x20 ++#define SSP_TX_SLOT_VALID3 0x24 ++#define SSP_RX_SLOT_VALID0 0x28 ++#define SSP_RX_SLOT_VALID1 0x2c ++#define SSP_RX_SLOT_VALID2 0x30 ++#define SSP_RX_SLOT_VALID3 0x34 ++#define SSP_SLOT_SIZE0 0x38 ++#define SSP_SLOT_SIZE1 0x3c ++#define SSP_SLOT_SIZE2 0x40 ++#define SSP_SLOT_SIZE3 0x44 ++#define SSP_READ_PORT 0x48 ++#define SSP_WRITE_PORT 0x4c ++ ++ ++void printFreq_Revision(int num); ++void SLIC_SPI_write(int num, UINT8 ,UINT8); ++UINT8 SLIC_SPI_read(int num, UINT8); ++void SLIC_SPI_write_bit(char); ++void SLIC_SPI_ind_write(int num, UINT8, UINT16); ++UINT16 SLIC_SPI_ind_read(int num, UINT8); ++void SLIC_SPI_CS_enable(UINT8); ++unsigned int SLIC_SPI_read_bit(void); ++void SLIC_SPI_pre_st(void); ++UINT32 ssp_init(void); ++UINT16 SLIC_SPI_get_identifier(int num); ++int selfTest(int num); ++void exception (int num, enum exceptions e); ++int SLIC_init(int num); ++UINT8 version(int num); ++UINT8 chipType (int num); ++void SLIC_init_ind_reg_set(int num); ++UINT8 powerUp(int num); ++UINT8 powerLeakTest(int num); ++void SLIC_init_reg_set(int num); ++int calibrate(int num); ++void goActive(int num); ++void clearInterrupts(int num); ++void setState(int num, int); ++UINT8 loopStatus(int num); ++int verifyIndirectRegisters(int num); ++int verifyIndirectReg(int num, UINT8 , UINT16); ++void sendProSLICID(int num); ++void disableOscillators(int num); ++UINT8 checkSum(int num, char * string ); ++void fskInitialization (int num); ++void fskByte(int num, UINT8 c); ++void waitForInterrupt (int num); ++//void findNumber(void); ++UINT8 dtmfAction(int num); ++UINT8 digit(int num); ++void interrupt_init(void); ++//void gemini_slic_isr (int ); ++int groundShort(int num); ++void clearAlarmBits(int num); ++void stopRinging(int num); ++void activateRinging(int num); ++void initializeLoopDebounceReg(int num); ++void busyJapan(int num) ; ++void ringBackJapan(int num) ; ++void stateMachine(int num); ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/hardware.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/hardware.h 2008-03-14 12:48:02.872746442 +0200 +@@ -0,0 +1,47 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10/hardware.h ++ * ++ * This file contains the hardware definitions of the Integrator. ++ * ++ * Copyright (C) 1999 ARM Limited. ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H ++ ++#include <asm/arch/platform.h> ++ ++#define pcibios_assign_all_busses() 1 ++ ++/* ++ * Where in virtual memory the IO devices (timers, system controllers ++ * and so on) ++ * ++ * macro to get at IO space when running virtually ++*/ ++ ++#define IO_ADDRESS(x) (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000) ++#define FLASH_VBASE 0xFE000000 ++#define FLASH_SIZE 0x1000000// 8M ++#define FLASH_START SL2312_FLASH_BASE ++#define FLASH_VADDR(x) ((x & 0x00ffffff)|0xFE000000) // flash virtual address ++ ++#define PCIBIOS_MIN_IO 0x100 // 0x000-0x100 AHB reg and PCI config, data ++#define PCIBIOS_MIN_MEM 0 ++ ++#endif ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/int_ctrl.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/int_ctrl.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,171 @@ ++/* ++ * ++ * This file contains the register definitions for the Excalibur ++ * Timer TIMER00. ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __INT_CTRL_H ++#define __INT_CTRL_H ++ ++#define PCI_IRQ_OFFSET 64 /* PCI start IRQ number */ ++#define FIQ_OFFSET 32 ++ ++#define IRQ_SOURCE(base_addr) (INT_CTRL_TYPE(base_addr + 0x00)) ++#define IRQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x04 )) ++#define IRQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x08 )) ++#define IRQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x0C )) ++#define IRQ_TLEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x10 )) ++#define IRQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x14 )) ++#define FIQ_SOURCE(base_addr) (INT_CTRL_TYPE (base_addr + 0x20 )) ++#define FIQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x24 )) ++#define FIQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x28 )) ++#define FIQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x2C )) ++#define FIQ_LEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x30 )) ++#define FIQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x34 )) ++ ++#ifdef CONFIG_SL3516_ASIC ++#define IRQ_SERIRQ0_OFFSET 30 ++#define IRQ_PCID_OFFSET 29 ++#define IRQ_PCIC_OFFSET 28 ++#define IRQ_PCIB_OFFSET 27 ++#define IRQ_PWR_OFFSET 26 ++#define IRQ_CIR_OFFSET 25 ++#define IRQ_GPIO2_OFFSET 24 ++#define IRQ_GPIO1_OFFSET 23 ++#define IRQ_GPIO_OFFSET 22 ++#define IRQ_SSP_OFFSET 21 ++#define IRQ_LPC_OFFSET 20 ++#define IRQ_LCD_OFFSET 19 ++#define IRQ_UART_OFFSET 18 ++#define IRQ_RTC_OFFSET 17 ++#define IRQ_TIMER3_OFFSET 16 ++#define IRQ_TIMER2_OFFSET 15 ++#define IRQ_TIMER1_OFFSET 14 ++#define IRQ_FLASH_OFFSET 12 ++#define IRQ_USB1_OFFSET 11 ++#define IRQ_USB0_OFFSET 10 ++#define IRQ_DMA_OFFSET 9 ++#define IRQ_PCI_OFFSET 8 ++#define IRQ_IPSEC_OFFSET 7 ++#define IRQ_RAID_OFFSET 6 ++#define IRQ_IDE1_OFFSET 5 ++#define IRQ_IDE0_OFFSET 4 ++#define IRQ_WATCHDOG_OFFSET 3 ++#define IRQ_GMAC1_OFFSET 2 ++#define IRQ_GMAC0_OFFSET 1 ++#define IRQ_CPU0_IP_IRQ_OFFSET 0 ++ ++#define IRQ_SERIRQ0_MASK (1<<30) ++#define IRQ_PCID_MASK (1<<29) ++#define IRQ_PCIC_MASK (1<<28) ++#define IRQ_PCIB_MASK (1<<27) ++#define IRQ_PWR_MASK (1<<26) ++#define IRQ_CIR_MASK (1<<25) ++#define IRQ_GPIO2_MASK (1<<24) ++#define IRQ_GPIO1_MASK (1<<23) ++#define IRQ_GPIO_MASK (1<<22) ++#define IRQ_SSP_MASK (1<<21) ++#define IRQ_LPC_MASK (1<<20) ++#define IRQ_LCD_MASK (1<<19) ++#define IRQ_UART_MASK (1<<18) ++#define IRQ_RTC_MASK (1<<17) ++#define IRQ_TIMER3_MASK (1<<16) ++#define IRQ_TIMER2_MASK (1<<15) ++#define IRQ_TIMER1_MASK (1<<14) ++#define IRQ_FLASH_MASK (1<<12) ++#define IRQ_USB1_MASK (1<<11) ++#define IRQ_USB0_MASK (1<<10) ++#define IRQ_DMA_MASK (1<< 9) ++#define IRQ_PCI_MASK (1<< 8) ++#define IRQ_IPSEC_MASK (1<< 7) ++#define IRQ_RAID_MASK (1<< 6) ++#define IRQ_IDE1_MASK (1<< 5) ++#define IRQ_IDE0_MASK (1<< 4) ++#define IRQ_WATCHDOG_MASK (1<< 3) ++#define IRQ_GMAC1_MASK (1<< 2) ++#define IRQ_GMAC0_MASK (1<< 1) ++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) ++#else ++#define IRQ_SERIRQ0_OFFSET 30 ++#define IRQ_PCID_OFFSET 29 ++#define IRQ_PCIC_OFFSET 28 ++#define IRQ_PCIB_OFFSET 27 ++#define IRQ_PWR_OFFSET 26 ++#define IRQ_CIR_OFFSET 25 ++#define IRQ_GPIO2_OFFSET 24 ++#define IRQ_GPIO1_OFFSET 23 ++#define IRQ_GPIO_OFFSET 22 ++#define IRQ_SSP_OFFSET 21 ++#define IRQ_LPC_OFFSET 20 ++#define IRQ_LCD_OFFSET 19 ++#define IRQ_UART_OFFSET 18 ++#define IRQ_RTC_OFFSET 17 ++#define IRQ_TIMER3_OFFSET 16 ++#define IRQ_TIMER2_OFFSET 15 ++#define IRQ_TIMER1_OFFSET 14 ++#define IRQ_FLASH_OFFSET 12 ++#define IRQ_USB1_OFFSET 11 ++#define IRQ_USB0_OFFSET 10 ++#define IRQ_DMA_OFFSET 9 ++#define IRQ_PCI_OFFSET 8 ++#define IRQ_IPSEC_OFFSET 7 ++#define IRQ_RAID_OFFSET 6 ++#define IRQ_IDE1_OFFSET 5 ++#define IRQ_IDE0_OFFSET 4 ++#define IRQ_WATCHDOG_OFFSET 3 ++#define IRQ_GMAC1_OFFSET 2 ++#define IRQ_GMAC0_OFFSET 1 ++#define IRQ_CPU0_IP_IRQ_OFFSET 0 ++ ++#define IRQ_SERIRQ0_MASK (1<<30) ++#define IRQ_PCID_MASK (1<<29) ++#define IRQ_PCIC_MASK (1<<28) ++#define IRQ_PCIB_MASK (1<<27) ++#define IRQ_PWR_MASK (1<<26) ++#define IRQ_CIR_MASK (1<<25) ++#define IRQ_GPIO2_MASK (1<<24) ++#define IRQ_GPIO1_MASK (1<<23) ++#define IRQ_GPIO_MASK (1<<22) ++#define IRQ_SSP_MASK (1<<21) ++#define IRQ_LPC_MASK (1<<20) ++#define IRQ_LCD_MASK (1<<19) ++#define IRQ_UART_MASK (1<<18) ++#define IRQ_RTC_MASK (1<<17) ++#define IRQ_TIMER3_MASK (1<<16) ++#define IRQ_TIMER2_MASK (1<<15) ++#define IRQ_TIMER1_MASK (1<<14) ++#define IRQ_FLASH_MASK (1<<12) ++#define IRQ_USB1_MASK (1<<11) ++#define IRQ_USB0_MASK (1<<10) ++#define IRQ_DMA_MASK (1<< 9) ++#define IRQ_PCI_MASK (1<< 8) ++#define IRQ_IPSEC_MASK (1<< 7) ++#define IRQ_RAID_MASK (1<< 6) ++#define IRQ_IDE1_MASK (1<< 5) ++#define IRQ_IDE0_MASK (1<< 4) ++#define IRQ_WATCHDOG_MASK (1<< 3) ++#define IRQ_GMAC1_MASK (1<< 2) ++#define IRQ_GMAC0_MASK (1<< 1) ++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) ++#endif ++ ++ ++#endif /* __INT_CTRL_H */ ++ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/io.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/io.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,50 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/io.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARM_ARCH_IO_H ++#define __ASM_ARM_ARCH_IO_H ++ ++#define IO_SPACE_LIMIT 0xffffffff ++ ++ ++/* ++ * Generic virtual read/write ++ */ ++/* ++#define __arch_getw(a) (*(volatile unsigned short *)(a)) ++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) ++*/ ++/*#define outsw __arch_writesw ++#define outsl __arch_writesl ++#define outsb __arch_writesb ++#define insb __arch_readsb ++#define insw __arch_readsw ++#define insl __arch_readsl*/ ++ ++#define __io(a) (a) ++#define __mem_pci(a) (a) ++/* ++#define __arch_getw(a) (*(volatile unsigned short *)(a)) ++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) ++*/ ++#define iomem_valid_addr(off,size) (1) ++#define iomem_to_phys(off) (off) ++ ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/ipi.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/ipi.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,189 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/system.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_IPI_H ++#define __ASM_ARCH_IPI_H ++#include <asm/io.h> ++ ++//#define spin_lock(x) spin_lock_dt(x) ++//#define spin_unlock(x) spin_unlock_dt(x) ++ ++#define SWAP_OFFSET 0x400000 ++#define SWAP_SIZE 0x400000 ++ ++#define SHARE_MEM_ADDR 0x2000000 ++#define SHARE_MEM_SIZE 1024*1024 ++ ++ ++//--> Add by jason for IPI testing ++// memory layout for maste & slave bin ++#define MASTERTEXT 0x8000 ++#define SLAVETEXT 0x108000 ++#define SHARESIZE 0x4000 ++#define SHAREADDR SHARE_MEM_ADDR // starting 8M ++ ++// CPU1 reset release ++#define GLOBAL_BASE IO_ADDRESS(0x40000000) ++#define GLOBAL_SOFTRESET (GLOBAL_BASE + 0x0C) ++#define CPU1_RESET_BIT_MASK 0x40000000 ++ ++// IPI , need to redefine the folliwing, bug ++#define CPU0_STATUS (GLOBAL_BASE + 0x0038) ++#define CPU1_STATUS (GLOBAL_BASE + 0x003C) ++#define CPU_IPI_BIT_MASK 0x80000000 ++ ++/* Your basic SMP spinlocks, allowing only a single CPU anywhere ++*/ ++typedef struct { ++ volatile unsigned int lock; ++} spinlock_dt; ++ ++ ++#define MASTER_BIT 0x01 ++#define SLAVE_BIT 0x02 ++#define HEART_BIT 0x04 ++#define IPI0_IRQ_BIT 0x08 ++#define IPI0_FIQ_BIT 0x10 ++#define IPI1_IRQ_BIT 0x20 ++#define IPI1_FIQ_BIT 0x40 ++ ++#define IRQ 0 ++#define FIQ 1 ++#define DONE 0xff ++ ++#define CPU0 0x0 ++#define CPU1 0x1 ++ ++#define MAXCHAR 128*1024 ++typedef struct { ++ int flag; ++ int uart_flag; ++ int cnt; ++ spinlock_dt lk; ++ char message[MAXCHAR]; ++}s_mailbox; ++ ++// JScale proj definition ++typedef struct { ++ u16 type; // message Type ++ u16 length; // message length, including message header ++} IPC_MSG_HDR_T; ++ ++typedef struct{ ++ IPC_MSG_HDR_T hdr; ++ u32 input_location; ++ u32 input_size; ++ u32 output_location; ++ u16 ScaledImageWidth; ++ u16 ScaledImageHeight; ++ u8 ScaledImageQuality; ++ u8 MaintainResultionRatio; ++ u8 TwoStepScaling; ++ u8 InputFormat; ++ u8 verbose; ++ u8 reserved[3]; ++} JSCALE_REQ_T; ++ ++typedef struct{ ++ IPC_MSG_HDR_T hdr; ++ u32 status; ++ u32 code; ++ u32 output_size; ++} JSCALE_RSP_T; ++ ++#define IPC_JSCALE_REQ_MSG 0 // JScale request from CPU-0 to CPU-1 ++#define IPC_JSCALE_RSP_MSG 1 // JScale response from CPU-1 to CPU-0 ++ ++enum { ++ JSCALE_STATUS_OK = 0, ++ JSCALE_UNKNOWN_MSG_TYPE, ++ JSCALE_FAILED_FILE_SIZE, ++ JSCALE_FAILED_MALLOC, ++ JSCALE_FAILED_FORMAT, ++ JSCALE_DECODE_ERROR, ++ JSCALE_BUSY, ++}; ++// <-- JScale ++ ++#define GEMINI_IPI_IOCTL_BASE 'Z' ++#define GEMINI_IPI_JSCALE_REQ _IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T) ++#define GEMINI_IPI_JSCALE_STAT _IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T) ++ ++ ++/* ++* Simple spin lock operations. ++* ++*/ ++ ++#define spin_is_locked_dt(x)((x)->lock != 0) ++ ++static inline int test_and_set_dt(spinlock_dt *lock) ++{ ++unsigned long tmp; ++__asm__ __volatile__( ++"swp %0, %2, [%1]\n" ++: "=&r" (tmp) ++: "r" (&lock->lock), "r" (1) ++: "cc", "memory"); ++ ++return tmp; ++} ++ ++static inline void spin_lock_dt(spinlock_dt *lock) ++{ ++ ++unsigned long tmp; ++__asm__ __volatile__( ++"1: ldr %0, [%1]\n" ++"teq %0, #0\n" ++"swpeq %0, %2, [%1]\n" ++" teqeq %0, #0\n" ++" bne 1b" ++ : "=&r" (tmp) ++ : "r" (&lock->lock), "r" (1) ++ : "cc", "memory"); ++} ++ ++static inline void spin_unlock_dt(spinlock_dt *lock) ++{ ++ __asm__ __volatile__( ++" str %1, [%0]" ++ : ++ : "r" (&lock->lock), "r" (0) ++ : "cc", "memory"); ++} ++ ++static inline int getcpuid(void) ++{ ++ int cpuid; ++ ++ __asm__( ++"mrc p8, 0, r0, c0, c0, 0\n" ++"mov %0, r0" ++ :"=r"(cpuid) ++ : ++ :"r0"); ++ return (cpuid & 0x07); ++} ++ ++ ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/irq.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/irq.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,23 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/irq.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++ // Since we have PCI interrupt which the interrupt line is pseudo ++ // we need do some fixup ++int fixup_irq(int irq); +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/irqs.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/irqs.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,102 @@ ++/* ++ * linux/include/asm-arm/arch-camelot/irqs.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* Use the Excalibur chip definitions */ ++#define INT_CTRL_TYPE ++#include "asm/arch/int_ctrl.h" ++ ++#ifdef CONFIG_SL3516_ASIC ++#define IRQ_SERIRQ_MAX 31 ++#define IRQ_SERIRQ1 31 ++#define IRQ_SERIRQ0 30 ++#define IRQ_PCID 29 ++#define IRQ_PCIC 28 ++#define IRQ_PCIB 27 ++#define IRQ_PWR 26 ++#define IRQ_CIR 25 ++#define IRQ_GPIO2 24 ++#define IRQ_GPIO1 23 ++#define IRQ_GPIO 22 ++#define IRQ_SSP 21 ++#define IRQ_LPC 20 ++#define IRQ_LCD 19 ++#define IRQ_UART 18 ++#define IRQ_RTC 17 ++#define IRQ_TIMER3 16 ++#define IRQ_TIMER2 15 ++#define IRQ_TIMER1 14 ++#define IRQ_FLASH 12 ++#define IRQ_USB1 11 ++#define IRQ_USB0 10 ++#define IRQ_DMA 9 ++#define IRQ_PCI 8 ++#define IRQ_IPSEC 7 ++#define IRQ_RAID 6 ++#define IRQ_IDE1 5 ++#define IRQ_IDE0 4 ++#define IRQ_WATCHDOG 3 ++#define IRQ_GMAC1 2 ++#define IRQ_GMAC0 1 ++#define IRQ_CPU0_IP_IRQ 0 ++#else ++#define IRQ_SERIRQ_MAX 31 ++#define IRQ_SERIRQ1 31 ++#define IRQ_SERIRQ0 30 ++#define IRQ_PCID 29 ++#define IRQ_PCIC 28 ++#define IRQ_PCIB 27 ++#define IRQ_PWR 26 ++#define IRQ_CIR 25 ++#define IRQ_GPIO2 24 ++#define IRQ_GPIO1 23 ++#define IRQ_GPIO 22 ++#define IRQ_SSP 21 ++#define IRQ_LPC 20 ++#define IRQ_LCD 19 ++#define IRQ_UART 18 ++#define IRQ_RTC 17 ++#define IRQ_TIMER3 16 ++#define IRQ_TIMER2 15 ++#define IRQ_TIMER1 14 ++#define IRQ_FLASH 12 ++#define IRQ_USB1 11 ++#define IRQ_USB0 10 ++#define IRQ_DMA 9 ++#define IRQ_PCI 8 ++#define IRQ_IPSEC 7 ++#define IRQ_RAID 6 ++#define IRQ_IDE1 5 ++#define IRQ_IDE0 4 ++#define IRQ_WATCHDOG 3 ++#define IRQ_GMAC1 2 ++#define IRQ_GMAC0 1 ++#endif ++ ++#define ARCH_TIMER_IRQ IRQ_TIMER2 /* for MV 4.0 */ ++ ++#define IRQ_PCI_INTA PCI_IRQ_OFFSET + 0 ++#define IRQ_PCI_INTB PCI_IRQ_OFFSET + 1 ++#define IRQ_PCI_INTC PCI_IRQ_OFFSET + 2 ++#define IRQ_PCI_INTD PCI_IRQ_OFFSET + 3 ++ ++#define NR_IRQS (IRQ_PCI_INTD + 4) ++ ++ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/it8712.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/it8712.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,24 @@ ++ ++#ifndef __IT8712_H__ ++#define __IT8712_H__ ++ ++#include "asm/arch/sl2312.h" ++ ++#define IT8712_IO_BASE SL2312_LPC_IO_BASE ++// Device LDN ++#define LDN_SERIAL1 0x01 ++#define LDN_SERIAL2 0x02 ++#define LDN_PARALLEL 0x03 ++#define LDN_KEYBOARD 0x05 ++#define LDN_MOUSE 0x06 ++#define LDN_GPIO 0x07 ++ ++#define IT8712_UART1_PORT 0x3F8 ++#define IT8712_UART2_PORT 0x2F8 ++ ++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 ++ ++void LPCSetConfig(char LdnNumber, char Index, char data); ++char LPCGetConfig(char LdnNumber, char Index); ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/memory.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/memory.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,38 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/memory.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_MMU_H ++#define __ASM_ARCH_MMU_H ++ ++/* ++ * Physical DRAM offset. ++ */ ++#define PHYS_OFFSET UL(0x00000000) ++ ++/* ++ * Virtual view <-> DMA view memory address translations ++ * virt_to_bus: Used to translate the virtual address to an ++ * address suitable to be passed to set_dma_addr ++ * bus_to_virt: Used to convert an address for DMA operations ++ * to an address that the kernel can use. ++ */ ++#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0) ++#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET) ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/param.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/param.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,20 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/param.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/pci.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/pci.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,18 @@ ++ ++#ifndef __SL2312_PCI_H__ ++#define __SL2312_PCI_H__ ++ ++#define SL2312_PCI_PMC 0x40 ++#define SL2312_PCI_PMCSR 0x44 ++#define SL2312_PCI_CTRL1 0x48 ++#define SL2312_PCI_CTRL2 0x4c ++#define SL2312_PCI_MEM1_BASE_SIZE 0x50 ++#define SL2312_PCI_MEM2_BASE_SIZE 0x54 ++#define SL2312_PCI_MEM3_BASE_SIZE 0x58 ++ ++ ++void sl2312_pci_mask_irq(unsigned int irq); ++void sl2312_pci_unmask_irq(unsigned int irq); ++int sl2312_pci_get_int_src(void); ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/platform.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/platform.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,7 @@ ++#ifndef PLATFORM_H ++#define PLATFORM_H ++#include "sl2312.h" ++ ++#define MAXIRQNUM 68 ++#endif ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/preempt.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/preempt.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,63 @@ ++/* ++ * include/asm-arm/arch-sl2312/preempt.h ++ * ++ * Timing support for preempt-stats, kfi, ilatency patches ++ * ++ * Author: dsingleton <dsingleton@mvista.com> ++ * ++ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ */ ++ ++#ifndef _ASM_ARCH_PREEMT_H ++#define _ASM_ARCH_PREEMT_H ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/sl2312.h> ++ ++static inline unsigned long clock_diff(unsigned long start, unsigned long stop) ++{ ++ return (start - stop); ++} ++ ++static inline unsigned int readclock(void) ++{ ++ unsigned int x; ++ ++ x = readl(IO_ADDRESS(SL2312_TIMER2_BASE)); ++ return x; ++} ++ ++static inline unsigned __ticks_per_usec(void) ++{ ++#ifdef CONFIG_SL3516_ASIC ++ unsigned int ahb_clock_rate_base=130; /* unit = MHz*/ ++ unsigned int reg_v=0; ++ unsigned int ticks_usec; ++ ++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4))); ++ reg_v >>=15; ++ ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2; ++ ++#else ++ unsigned int ticks_usec=20; ++#endif ++ ++ return ticks_usec; ++} ++ ++/* ++ * timer 1 runs @ 6Mhz 6 ticks = 1 microsecond ++ * and is configed as a count down timer. ++ */ ++#define TICKS_PER_USEC __ticks_per_usec() ++#define ARCH_PREDEFINES_TICKS_PER_USEC ++ ++#define clock_to_usecs(x) ((x) / TICKS_PER_USEC) ++ ++#define INTERRUPTS_ENABLED(x) (!(x & PSR_I_BIT)) ++ ++#endif ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,254 @@ ++#ifndef __sl2312_h ++#define __sl2312_h ++ ++/**************************************************************************** ++ * Copyright Storlink Corp 2002-2003. All rights reserved. * ++ *--------------------------------------------------------------------------* ++ * Name:board.s * ++ * Description: SL231x specfic define * ++ * Author: Plus Chen * ++ * Version: 0.9 Create ++ ****************************************************************************/ ++ ++/* ++ CPE address map; ++ ++ +==================================================== ++ 0x00000000 | FLASH ++ 0x0FFFFFFF | ++ |==================================================== ++ 0x10000000 | SDRAM ++ 0x1FFFFFFF | ++ |==================================================== ++ 0x20000000 | Global Registers 0x20000000-0x20FFFFFF ++ | EMAC and DMA 0x21000000-0x21FFFFFF ++ | UART Module 0x22000000-0x22FFFFFF ++ | Timer Module 0x23000000-0x23FFFFFF ++ | Interrupt Module 0x24000000-0x24FFFFFF ++ | RTC Module 0x25000000-0x25FFFFFF ++ | LPC Host Controller 0x26000000-0x26FFFFFF ++ | LPC Peripherial IO 0x27000000-0x27FFFFFF ++ | WatchDog Timer 0x28000000-0x28FFFFFF ++ 0x2FFFFFFF | Reserved 0x29000000-0x29FFFFFF ++ |===================================================== ++ 0x30000000 | PCI IO, Configuration Registers ++ 0x3FFFFFFF | ++ |===================================================== ++ 0x40000000 | PCI Memory ++ 0x4FFFFFFF | ++ |===================================================== ++ 0x50000000 | Ethernet MAC and DMA 0x50000000-0x50FFFFFF ++ | Security and DMA 0x51000000-0x51FFFFFF ++ | IDE Channel 0 Register 0x52000000-0x527FFFFF ++ | IDE Channel 1 Register 0x52800000-0x52FFFFFF ++ | USB Register 0x53000000-0x53FFFFFF ++ | Flash Controller 0x54000000-0x54FFFFFF ++ | DRAM Controller 0x55000000-0x55FFFFFF ++ 0x5FFFFFFF | Reserved 0x56000000-0x5FFFFFFF ++ |===================================================== ++ 0x60000000 | Reserved ++ 0x6FFFFFFF | ++ |===================================================== ++ 0x70000000 | FLASH shadow Memory ++ 0x7FFFFFFF | ++ |===================================================== ++ 0x80000000 | Big Endian of memory 0x00000000-0x7FFFFFFF ++ 0xFFFFFFFF | ++ +===================================================== ++*/ ++ ++ ++ ++/*------------------------------------------------------------------------------- ++ Memory Map definitions ++-------------------------------------------------------------------------------- */ ++#define TEST 1 ++#if 0 ++ ++static inline int GETCPUID() ++{ ++ int cpuid; ++ __asm__( ++"mrc p8, 0, r0, c0, c0, 0\n" ++"mov %0, r0" ++ :"=r"(cpuid) ++ : ++ :"r0"); ++ return (cpuid & 0x07); ++} ++#endif ++#define SL2312_SRAM_BASE 0x70000000 // SRAM base after remap ++#define SL2312_DRAM_BASE 0x00000000 // DRAM base after remap ++#define SL2312_RAM_BASE 0x10000000 // RAM code base before remap ++#define SL2312_FLASH_BASE 0x30000000 ++#define SL2312_ROM_BASE 0x30000000 ++#define SL2312_GLOBAL_BASE 0x40000000 ++#define SL2312_WAQTCHDOG_BASE 0x41000000 ++#define SL2312_UART_BASE 0x42000000 ++#define SL2312_TIMER_BASE 0x43000000 ++#define SL2312_LCD_BASE 0x44000000 ++#define SL2312_RTC_BASE 0x45000000 ++#define SL2312_SATA_BASE 0x46000000 ++#define SL2312_LPC_HOST_BASE 0x47000000 ++#define SL2312_LPC_IO_BASE 0x47800000 ++// #define SL2312_INTERRUPT_BASE 0x48000000 ++#define SL2312_INTERRUPT0_BASE 0x48000000 ++#define SL2312_INTERRUPT1_BASE 0x49000000 ++//#define SL2312_INTERRUPT_BASE ((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE) ++#define SL2312_INTERRUPT_BASE 0x48000000 ++#define SL2312_SSP_CTRL_BASE 0x4A000000 ++#define SL2312_POWER_CTRL_BASE 0x4B000000 ++#define SL2312_CIR_BASE 0x4C000000 ++#define SL2312_GPIO_BASE 0x4D000000 ++#define SL2312_GPIO_BASE1 0x4E000000 ++#define SL2312_GPIO_BASE2 0x4F000000 ++#define SL2312_PCI_IO_BASE 0x50000000 ++#define SL2312_PCI_MEM_BASE 0x58000000 ++#ifdef CONFIG_NET_SL351X ++#define SL2312_TOE_BASE 0x60000000 ++#define SL2312_GMAC0_BASE 0x6000A000 ++#define SL2312_GMAC1_BASE 0x6000E000 ++#else ++#define SL2312_GMAC0_BASE 0x60000000 ++#define SL2312_GMAC1_BASE 0x61000000 ++#endif ++#define SL2312_SECURITY_BASE 0x62000000 ++#define SL2312_IDE0_BASE 0x63000000 ++#define SL2312_IDE1_BASE 0x63400000 ++#define SL2312_RAID_BASE 0x64000000 ++#define SL2312_FLASH_CTRL_BASE 0x65000000 ++#define SL2312_DRAM_CTRL_BASE 0x66000000 ++#define SL2312_GENERAL_DMA_BASE 0x67000000 ++#define SL2312_USB_BASE 0x68000000 ++#define SL2312_USB0_BASE 0x68000000 ++#define SL2312_USB1_BASE 0x69000000 ++#define SL2312_FLASH_SHADOW 0x30000000 ++#define SL2312_BIG_ENDIAN_BASE 0x80000000 ++ ++#ifdef CONFIG_GEMINI_IPI ++#define CPU_1_MEM_BASE 0x4000000 // 64 MB ++#define CPU_1_DATA_OFFSET 0x4000000-0x300000 // Offset 61 MB ++#endif ++ ++#define SL2312_TIMER1_BASE SL2312_TIMER_BASE ++#define SL2312_TIMER2_BASE (SL2312_TIMER_BASE + 0x10) ++#define SL2312_TIMER3_BASE (SL2312_TIMER_BASE + 0x20) ++ ++#define SL2312_PCI_DMA_MEM1_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM2_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM3_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM1_SIZE 7 ++#define SL2312_PCI_DMA_MEM2_SIZE 6 ++#define SL2312_PCI_DMA_MEM3_SIZE 6 ++ ++/*------------------------------------------------------------------------------- ++ Global Module ++---------------------------------------------------------------------------------*/ ++#define GLOBAL_ID 0x00 ++#define GLOBAL_CHIP_ID 0x002311 ++#define GLOBAL_CHIP_REV 0xA0 ++#define GLOBAL_STATUS 0x04 ++#define GLOBAL_CONTROL 0x1C ++#define GLOBAL_REMAP_BIT 0x01 ++#define GLOBAL_RESET_REG 0x0C ++#define GLOBAL_MISC_REG 0x30 ++#define PFLASH_SHARE_BIT 0x02 ++ ++#define GLOBAL_RESET (1<<31) ++#define RESET_CPU1 (1<<30) ++#define RESET_SATA1 (1<<27) ++#define RESET_SATA0 (1<<26) ++#define RESET_CIR (1<<25) ++#define RESET_EXT_DEV (1<<24) ++#define RESET_WD (1<<23) ++#define RESET_GPIO2 (1<<22) ++#define RESET_GPIO1 (1<<21) ++#define RESET_GPIO0 (1<<20) ++#define RESET_SSP (1<<19) ++#define RESET_UART (1<<18) ++#define RESET_TIMER (1<<17) ++#define RESET_RTC (1<<16) ++#define RESET_INT0 (1<<15) ++#define RESET_INT1 (1<<14) ++#define RESET_LCD (1<<13) ++#define RESET_LPC (1<<12) ++#define RESET_APB (1<<11) ++#define RESET_DMA (1<<10) ++#define RESET_USB1 (1<<9 ) ++#define RESET_USB0 (1<<8 ) ++#define RESET_PCI (1<<7 ) ++#define RESET_GMAC1 (1<<6 ) ++#define RESET_GMAC0 (1<<5 ) ++#define RESET_IPSEC (1<<4 ) ++#define RESET_RAID (1<<3 ) ++#define RESET_IDE (1<<2 ) ++#define RESET_FLASH (1<<1 ) ++#define RESET_DRAM (1<<0 ) ++ ++ ++ ++ ++ ++ ++ ++ ++/*------------------------------------------------------------------------------- ++ DRAM Module ++---------------------------------------------------------------------------------*/ ++#define DRAM_SIZE_32M 0x2000000 ++#define DRAM_SIZE_64M 0x4000000 ++#define DRAM_SIZE_128M 0x8000000 ++ ++#define DRAM_SIZE DRAM_SIZE_128M ++ ++#define DRAM_SDRMR 0x00 ++#define SDRMR_DISABLE_DLL 0x80010000 ++ ++/*------------------------------------------------------------------------------ ++ Share Pin Flag ++--------------------------------------------------------------------------------*/ ++#ifdef CONFIG_SL2312_SHARE_PIN ++#define FLASH_SHARE_BIT 0 ++#define UART_SHARE_BIT 1 ++#define EMAC_SHARE_BIT 2 ++#define IDE_RW_SHARE_BIT 3 ++#define IDE_CMD_SHARE_BIT 4 ++#endif ++/*------------------------------------------------------------------------------- ++ System Clock ++---------------------------------------------------------------------------------*/ ++ ++#ifndef SYS_CLK ++#ifdef CONFIG_SL3516_ASIC ++#define SYS_CLK 150000000 ++#else ++#define SYS_CLK 20000000 ++#endif ++#endif ++ ++#define AHB_CLK SYS_CLK ++#define MAX_TIMER 3 ++#ifndef APB_CLK ++#ifdef CONFIG_SL3516_ASIC ++#define APB_CLK (SYS_CLK / 6) ++#else ++#define APB_CLK SYS_CLK ++#endif ++#endif ++ ++#ifdef CONFIG_SL3516_ASIC ++#define UART_CLK 48000000 // 30000000 for GeminiA chip, else 48000000 ++#else ++#define UART_CLK 48000000 ++#endif ++ ++#define SL2312_BAUD_115200 (UART_CLK / 1843200) ++#define SL2312_BAUD_57600 (UART_CLK / 921600) ++#define SL2312_BAUD_38400 (UART_CLK / 614400) ++#define SL2312_BAUD_19200 (UART_CLK / 307200) ++#define SL2312_BAUD_14400 (UART_CLK / 230400) ++#define SL2312_BAUD_9600 (UART_CLK / 153600) ++ ++#endif ++ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312_ipsec.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312_ipsec.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,684 @@ ++#ifndef _IPSEC_DIAG_H ++#define _IPSEC_DIAG_H ++ ++#include <linux/scatterlist.h> ++ ++#define BIG_ENDIAN 0 ++ ++#define IPSEC_TEST 0 ++#define ZERO_COPY 1 ++ ++#define UINT unsigned int ++#define BYTE unsigned char ++ ++/* define cipher algorithm */ ++enum CIPHER { ++ DES_ECB_E =20, ++ TDES_ECB_E =21, ++ AES_ECB_E =22, ++ DES_CBC_E =24, ++ TDES_CBC_E =25, ++ AES_CBC_E =26, ++ ++ DES_ECB_D =27, ++ TDES_ECB_D =28, ++ AES_ECB_D =29, ++ DES_CBC_D =31, ++ TDES_CBC_D =32, ++ AES_CBC_D =33, ++ A_SHA1 =12, ++ A_HMAC_SHA1 =13, ++ A_MD5 =14, ++ A_HMAC_MD5 =15, ++}; ++ ++// opMode ++#define CIPHER_ENC 0x1 ++#define CIPHER_DEC 0x3 ++#define AUTH 0x4 ++#define ENC_AUTH 0x5 ++#define AUTH_DEC 0x7 ++ ++// cipherAlgorithm ++#define CBC_DES 0x4 ++#define CBC_3DES 0x5 ++#define CBC_AES 0x6 ++#define ECB_DES 0x0 ++#define ECB_3DES 0x1 ++#define ECB_AES 0x2 ++ ++// authAlgorithm ++#define SHA1 0 ++#define MD5 1 ++#define HMAC_SHA1 2 ++#define HMAC_MD5 3 ++#define FCS 4 ++ ++//cipher mode ++#define ECB 0 ++#define CBC 1 ++ ++// authMode ++#define AUTH_APPEND 0 ++#define AUTH_CHKVAL 1 ++ ++/******************************************************/ ++/* the offset of IPSEC DMA register */ ++/******************************************************/ ++enum IPSEC_DMA_REGISTER { ++ IPSEC_DMA_DEVICE_ID = 0xff00, ++ IPSEC_DMA_STATUS = 0xff04, ++ IPSEC_TXDMA_CTRL = 0xff08, ++ IPSEC_TXDMA_FIRST_DESC = 0xff0c, ++ IPSEC_TXDMA_CURR_DESC = 0xff10, ++ IPSEC_RXDMA_CTRL = 0xff14, ++ IPSEC_RXDMA_FIRST_DESC = 0xff18, ++ IPSEC_RXDMA_CURR_DESC = 0xff1c, ++ IPSEC_TXDMA_BUF_ADDR = 0xff28, ++ IPSEC_RXDMA_BUF_ADDR = 0xff38, ++ IPSEC_RXDMA_BUF_SIZE = 0xff30, ++}; ++ ++#define IPSEC_STATUS_REG 0x00a8 ++#define IPSEC_RAND_NUM_REG 0x00ac ++ ++/******************************************************/ ++/* the field definition of IPSEC DMA Module Register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff00 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int p_wclk : 4; /* DMA_APB write clock period */ ++ unsigned int p_rclk : 4; /* DMA_APB read clock period */ ++ unsigned int : 8; ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int : 8; ++ unsigned int p_rclk : 4; /* DMA_APB read clock period */ ++ unsigned int p_wclk : 4; /* DMA_APB write clock period */ ++#endif ++ } bits; ++} IPSEC_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff04 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int intr : 8; /* Peripheral interrupt */ ++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ ++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ ++ unsigned int : 3; ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ ++#else ++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 3; ++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ ++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ ++ unsigned int intr : 8; /* Peripheral interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++#endif ++ } bits; ++} IPSEC_DMA_STATUS_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff08 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} IPSEC_TXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff0c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} IPSEC_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff10 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} IPSEC_TXDMA_CURR_DESC_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff14 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} IPSEC_RXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff18 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} IPSEC_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff1c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} IPSEC_RXDMA_CURR_DESC_T; ++ ++ ++ ++/******************************************************/ ++/* the field definition of IPSEC module Register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int id; ++ struct bit_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int device_id : 28; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 28; ++#endif ++ } bits; ++} IPSEC_ID_T; ++ ++typedef union ++{ ++ unsigned int control; ++ struct bit_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ ++ unsigned int : 1; ++ unsigned int cipher_algorithm : 3; ++ unsigned int aesnk : 4; /* AES Key Size */ ++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ ++ unsigned int : 2; ++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ ++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ ++ unsigned int auth_algorithm : 3; ++ unsigned int : 1; ++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ ++ /* by the authentication module */ ++ unsigned int process_id : 8; /* Used to identify process.This number will be */ ++ /* copied to the descriptor status of received packet*/ ++#else ++ unsigned int process_id : 8; /* Used to identify process.This number will be */ ++ /* copied to the descriptor status of received packet*/ ++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ ++ /* by the authentication module */ ++ unsigned int : 1; ++ unsigned int auth_algorithm : 3; ++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ ++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ ++ unsigned int : 2; ++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ ++ unsigned int aesnk : 4; /* AES Key Size */ ++ unsigned int cipher_algorithm : 3; ++ unsigned int : 1; ++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ ++#endif ++ } bits; ++} IPSEC_CONTROL_T; ++ ++ ++typedef union ++{ ++ unsigned int cipher_packet; ++ struct bit_0008 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ ++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ ++#else ++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ ++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ ++#endif ++ } bits; ++} IPSEC_CIPHER_PACKET_T; ++ ++typedef union ++{ ++ unsigned int auth_packet; ++ struct bit_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ ++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ ++#else ++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ ++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ ++#endif ++ } bits; ++} IPSEC_AUTH_PACKET_T; ++ ++typedef union ++{ ++ unsigned int status; ++ struct bit_00a8 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ ++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ ++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ ++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ ++ unsigned int : 16; ++ unsigned int parser_err_code: 4; /* Authentication Compare result */ ++ unsigned int auth_err_code : 4; /* Authentication module error code */ ++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ ++#else ++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ ++ unsigned int auth_err_code : 4; /* Authentication module error code */ ++ unsigned int parser_err_code: 4; /* Authentication Compare result */ ++ unsigned int : 16; ++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ ++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ ++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ ++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ ++#endif ++ } bits; ++} IPSEC_STATUS_T; ++ ++ ++ ++/************************************************************************/ ++/* IPSec Descriptor Format */ ++/************************************************************************/ ++typedef struct descriptor_t ++{ ++ union frame_control_t ++ { ++ unsigned int bits32; ++ struct bits_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 1; /* authentication compare result */ ++ unsigned int : 6; /* checksum[15:8] */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int : 6; /* checksum[15:8] */ ++ unsigned int : 1; /* authentication compare result */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits; ++ } frame_ctrl; ++ ++ union flag_status_t ++ { ++ unsigned int bits32; ++ struct bits_0004 ++ { ++#if (BIG_ENDIAN==1) ++// unsigned int checksum : 8; /* checksum[7:0] */ ++ unsigned int : 4; ++ unsigned int auth_result: 1; ++ unsigned int wep_crc_ok : 1; ++ unsigned int tkip_mic_ok: 1; ++ unsigned int ccmp_mic_ok: 1; ++ unsigned int process_id : 8; ++ unsigned int frame_count:16; ++#else ++ unsigned int frame_count:16; ++ unsigned int process_id : 8; ++ unsigned int ccmp_mic_ok: 1; ++ unsigned int tkip_mic_ok: 1; ++ unsigned int wep_crc_ok : 1; ++ unsigned int auth_result: 1; ++ unsigned int : 4; ++// unsigned int checksum : 8; /* checksum[7:0] */ ++#endif ++ } bits_rx_status; ++ ++ struct bits_0005 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 8; ++ unsigned int process_id : 8; ++ unsigned int frame_count:16; ++#else ++ unsigned int frame_count:16; ++ unsigned int process_id : 8; ++ unsigned int : 8; ++#endif ++ } bits_tx_status; ++ ++ struct bits_0006 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int :22; ++ unsigned int tqflag :10; ++#else ++ unsigned int tqflag :10; ++ unsigned int :22; ++#endif ++ } bits_tx_flag; ++ } flag_status; ++ ++ unsigned int buf_adr; /* data buffer address */ ++ ++ union next_desc_t ++ { ++ unsigned int next_descriptor; ++ struct bits_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar :28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++#else ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar :28; /* next descriptor address */ ++#endif ++ } bits; ++ } next_desc; ++} IPSEC_DESCRIPTOR_T; ++ ++ ++typedef struct IPSEC_S ++{ ++ unsigned char *tx_bufs; ++ unsigned char *rx_bufs; ++ IPSEC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ ++ IPSEC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ ++ IPSEC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ ++ IPSEC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ ++ IPSEC_DESCRIPTOR_T *tx_finished_desc; ++ IPSEC_DESCRIPTOR_T *rx_finished_desc; ++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ ++} IPSEC_T; ++ ++ ++/*=====================================================================================================*/ ++/* Data Structure of IPSEC Control Packet */ ++/*=====================================================================================================*/ ++typedef struct IPSEC_ECB_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_ECB_AUTH_T; ++ ++typedef struct IPSEC_CBC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_CBC_AUTH_T; ++ ++typedef struct IPSEC_ECB_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_ECB_AUTH_HMAC_T; ++ ++typedef struct IPSEC_CBC_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_CBC_AUTH_HMAC_T; ++ ++typedef struct IPSEC_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_HMAC_AUTH_T; ++ ++typedef union ++{ ++ unsigned char auth_pkt[28]; ++ ++ struct IPSEC_AUTH_S ++ { ++ IPSEC_CONTROL_T control; /* control parameter(4-byte) */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter(4-byte) */ ++ unsigned char auth_check_val[5*4]; ++ } var; ++} IPSEC_AUTH_T; ++ ++typedef struct IPSEC_CIPHER_CBC_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++} IPSEC_CIPHER_CBC_T; ++ ++typedef struct IPSEC_CIPHER_ECB_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ unsigned char cipher_key[8*4]; ++} IPSEC_CIPHER_ECB_T; ++ ++ ++/**************************************************************************** ++ * Structure Definition * ++ ****************************************************************************/ ++struct IPSEC_PACKET_S ++{ ++ unsigned int op_mode; /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */ ++ unsigned int cipher_algorithm; /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */ ++ unsigned int auth_algorithm; /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */ ++ unsigned int auth_result_mode; /* AUTH_APPEND(0),AUTH_CHKVAL(1) */ ++ unsigned int process_id; /* Used to identify the process */ ++ unsigned int auth_header_len; /* Header length to be skipped by the authenticator */ ++ unsigned int auth_algorithm_len; /* Length of message body that is to be authenticated */ ++ unsigned int cipher_header_len; /* Header length to be skipped by the cipher */ ++ unsigned int cipher_algorithm_len; /* Length of message body to be encrypted or decrypted */ ++ unsigned char iv[16]; /* Initial vector used for DES,3DES,AES */ ++ unsigned int iv_size; /* Initial vector size */ ++ unsigned char auth_key[64]; /* authentication key */ ++ unsigned int auth_key_size; /* authentication key size */ ++ unsigned char cipher_key[32]; /* cipher key */ ++ unsigned int cipher_key_size; /* cipher key size */ ++ struct scatterlist *in_packet; /* input_packet buffer pointer */ ++ //unsigned char *in_packet; /* input_packet buffer pointer */ ++ unsigned int pkt_len; /* input total packet length */ ++ unsigned char auth_checkval[20]; /* Authentication check value/FCS check value */ ++ struct IPSEC_PACKET_S *next,*prev; /* pointer to next/previous operation to perform on buffer */ ++ void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */ ++ unsigned char *out_packet; /* output_packet buffer pointer */ ++ //struct scatterlist *out_packet; /* output_packet buffer pointer */ ++ unsigned int out_pkt_len; /* output total packet length */ ++ unsigned int auth_cmp_result; /* authentication compare result */ ++ unsigned int checksum; /* checksum value */ ++ unsigned int status; /* ipsec return status. 0:success, others:fail */ ++#if (IPSEC_TEST == 1) ++ unsigned char *sw_packet; /* for test only */ ++ unsigned int sw_pkt_len; /* for test only */ ++#endif ++} ; ++ ++/***************************************************************************** ++ * Function : ipsec_crypto_hw_process ++ * Description : This function processes H/W authentication and cipher. ++ * Input : op_info - the authentication and cipher information for IPSec module. ++ * Output : none. ++ * Return : 0 - success, others - failure. ++ *****************************************************************************/ ++int ipsec_crypto_hw_process(struct IPSEC_PACKET_S *op_info); ++ ++int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode); ++int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode); ++#if 0 ++void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result); ++void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size, ++ unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct); ++void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len, ++ BYTE *auth_key,char authAlgorithm,char *auth_result, ++ char *pt, unsigned int pt_len,char *cipher_key, int key_size, ++ char *iv, char cipherAlgorithm,char *ct); ++#endif ++ ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl_random.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl_random.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,2 @@ ++#define RANDOM_ADD (IO_ADDRESS (0x051000000) + 0x0AC) ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/system.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/system.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,54 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/system.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H ++ ++#include <asm/arch/platform.h> ++#include <asm/arch/hardware.h> ++#include <asm/arch/it8712.h> ++#include <asm/io.h> ++ ++static void arch_idle(void) ++{ ++ /* ++ * This should do all the clock switching ++ * and wait for interrupt tricks ++ */ ++ cpu_do_idle(); ++} ++ ++extern __inline__ void arch_reset(char mode) ++{ ++ __raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG); ++} ++ ++ ++void (*pm_power_off)(void); ++//{ ++// printk("arch_power_off\n"); ++ ++ // Power off ++// __raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ ++//} ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/timer.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/timer.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,53 @@ ++/* ++ * ++ * This file contains the register definitions for the Excalibur ++ * Timer TIMER00. ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __TIMER_H ++#define __TIMER_H ++ ++/* ++ * Register definitions for the timers ++ */ ++ ++#define TIMER_COUNT(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x00 )) ++#define TIMER_LOAD(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x04 )) ++#define TIMER_MATCH1(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x08 )) ++#define TIMER_MATCH2(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x0C )) ++#define TIMER_CR(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x30 )) ++#define TIMER_1_CR_ENABLE_MSK (0x00000001) ++#define TIMER_1_CR_ENABLE_OFST (0) ++#define TIMER_1_CR_CLOCK_MSK (0x00000002) ++#define TIMER_1_CR_CLOCK_OFST (1) ++#define TIMER_1_CR_INT_MSK (0x00000004) ++#define TIMER_1_CR_INT_OFST (2) ++#define TIMER_2_CR_ENABLE_MSK (0x00000008) ++#define TIMER_2_CR_ENABLE_OFST (3) ++#define TIMER_2_CR_CLOCK_MSK (0x00000010) ++#define TIMER_2_CR_CLOCK_OFST (4) ++#define TIMER_2_CR_INT_MSK (0x00000020) ++#define TIMER_2_CR_INT_OFST (5) ++#define TIMER_3_CR_ENABLE_MSK (0x00000040) ++#define TIMER_3_CR_ENABLE_OFST (6) ++#define TIMER_3_CR_CLOCK_MSK (0x00000080) ++#define TIMER_3_CR_CLOCK_OFST (7) ++#define TIMER_3_CR_INT_MSK (0x00000100) ++#define TIMER_3_CR_INT_OFST (8) ++ ++#endif /* __TIMER00_H */ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/timex.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/timex.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,29 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/timex.h ++ * ++ * Excalibur timex specifications ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * ?? ++ */ ++#include <asm/arch/sl2312.h> ++ ++#define CLOCK_TICK_RATE APB_CLK ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/uart.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/uart.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,100 @@ ++/* * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __UART_H ++#define __UART_H ++ ++/* ++ * Register definitions for the UART ++ */ ++ ++#define UART_TX_FIFO_SIZE (15) ++ ++#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // read ++#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // write ++#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x04)) ++#define UART_IER_MS (0x08) ++#define UART_IER_RLS (0x04) ++#define UART_IER_TE (0x02) ++#define UART_IER_DR (0x01) ++#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // read ++#define UART_IIR_NONE (0x01) /* No interrupt pending */ ++#define UART_IIR_RLS (0x06) /* Receive Line Status */ ++#define UART_IIR_DR (0x04) /* Receive Data Ready */ ++#define UART_IIR_TIMEOUT (0x0c) /* Receive Time Out */ ++#define UART_IIR_TE (0x02) /* THR Empty */ ++#define UART_IIR_MODEM (0x00) /* Modem Status */ ++#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // write ++#define UART_FCR_FE (0x01) /* FIFO Enable */ ++#define UART_FCR_RXFR (0x02) /* Rx FIFO Reset */ ++#define UART_FCR_TXFR (0x04) /* Tx FIFO Reset */ ++#define UART_FCR_FIFO_1C (0x00) ++#define UART_FCR_FIFO_4C (0x40) ++#define UART_FCR_FIFO_8C (0x80) ++#define UART_FCR_FIFO_14C (0xC0) ++#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0C)) ++#define UART_LCR_MSK (0x03) ++#define UART_LCR_LEN5 (0x00) ++#define UART_LCR_LEN6 (0x01) ++#define UART_LCR_LEN7 (0x02) ++#define UART_LCR_LEN8 (0x03) ++#define UART_LCR_STOP (0x04) ++#define UART_LCR_EVEN (0x18) /* Even Parity */ ++#define UART_LCR_ODD (0x08) /* Odd Parity */ ++#define UART_LCR_PE (0x08) /* Parity Enable */ ++#define UART_LCR_SETBREAK (0x40) /* Set Break condition */ ++#define UART_LCR_STICKPARITY (0x20) /* Stick Parity Enable */ ++#define UART_LCR_DLAB (0x80) /* Divisor Latch Access Bit */ ++#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x10)) ++#define UART_MCR_DTR (0x1) /* Data Terminal Ready */ ++#define UART_MCR_RTS (0x2) /* Request to Send */ ++#define UART_MCR_OUT1 (0x4) /* output 1 */ ++#define UART_MCR_OUT2 (0x8) /* output2 or global interrupt enable */ ++#define UART_MCR_LPBK (0x10) /* loopback mode */ ++#define UART_MCR_MASK (0xE3) ++#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x14)) ++#define UART_LSR_DR (0x01) /* Data Ready */ ++#define UART_LSR_OE (0x02) /* Overrun Error */ ++#define UART_LSR_PE (0x04) /* Parity Error */ ++#define UART_LSR_FE (0x08) /* Framing Error */ ++#define UART_LSR_BI (0x10) /* Break Interrupt */ ++#define UART_LSR_THRE (0x20) /* THR Empty */ ++#define UART_LSR_TE (0x40) /* Transmitte Empty */ ++#define UART_LSR_DE (0x80) /* FIFO Data Error */ ++#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x18)) ++#define UART_MSR_DELTACTS (0x01) /* Delta CTS */ ++#define UART_MSR_DELTADSR (0x02) /* Delta DSR */ ++#define UART_MSR_TERI (0x04) /* Trailing Edge RI */ ++#define UART_MSR_DELTACD (0x08) /* Delta CD */ ++#define UART_MSR_CTS (0x10) /* Clear To Send */ ++#define UART_MSR_DSR (0x20) /* Data Set Ready */ ++#define UART_MSR_RI (0x40) /* Ring Indicator */ ++#define UART_MSR_DCD (0x80) /* Data Carrier Detect */ ++#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x1C)) ++#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0)) ++#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x4)) ++#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x8)) ++#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x20)) ++#define UART_MDR_SERIAL (0x0) ++ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++ ++#endif /* __UART_H */ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/uncompress.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/uncompress.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,94 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/uncompress.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include "asm/arch/platform.h" ++#include "asm/arch/hardware.h" ++#define UART_TYPE (volatile unsigned int*) ++#ifndef CONFIG_SERIAL_IT8712 ++#include "asm/arch/uart.h" ++#endif ++extern unsigned int it8712_uart_base; ++ ++/* ++ * This does not append a newline ++ */ ++static void putstr(const char *s) ++{ ++ ++#ifdef CONFIG_SERIAL_IT8712 ++ ++ unsigned char *base,*status,stat; ++ int i ; ++ ++ status = (unsigned char*)it8712_uart_base + 5; ++ base = (unsigned char*)it8712_uart_base ; ++ ++ while (*s) { ++ ++ stat = *status; ++ while (!(stat&0x20)) { // check status ++ for(i=0;i<0x10;i++) ; ++ status = (unsigned char*)it8712_uart_base + 5; ++ stat = *status ; ++ } ++ ++ *base = *s; ++ barrier(); ++ ++ if (*s == '\n') { ++ stat = *status; ++ while (!(stat&0x20)) { // check status ++ for(i=0;i<0x10;i++) ; ++ status = (unsigned char*)it8712_uart_base + 5; ++ stat = *status ; ++ } ++ ++ barrier(); ++ *base = '\r'; ++ } ++ s++; ++ } ++ ++#else ++ while (*s) { ++ while (!(*UART_LSR(SL2312_UART_BASE) & ++ UART_LSR_THRE)); ++ barrier(); ++ ++ *UART_THR(SL2312_UART_BASE) = *s; ++ ++ if (*s == '\n') { ++ while (!(*UART_LSR(SL2312_UART_BASE) & ++ UART_LSR_THRE)); ++ barrier(); ++ ++ *UART_THR(SL2312_UART_BASE) = '\r'; ++ } ++ s++; ++ } ++#endif ++} ++ ++/* ++ * nothing to do ++ */ ++#define arch_decomp_setup() ++ ++#define arch_decomp_wdog() +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/vmalloc.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/vmalloc.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,36 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/vmalloc.h ++ * ++ * Copyright (C) 2000 Russell King. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * Just any arbitrary offset to the start of the vmalloc VM area: the ++ * current 8MB value just means that there will be a 8MB "hole" after the ++ * physical memory until the kernel virtual memory starts. That means that ++ * any out-of-bounds memory accesses will hopefully be caught. ++ * The vmalloc() routines leaves a hole of 4kB between each vmalloced ++ * area for the same reason. ;) ++ */ ++#define VMALLOC_OFFSET (8*1024*1024) ++#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) ++#define VMALLOC_VMADDR(x) ((unsigned long)(x)) ++#define VMALLOC_END (PAGE_OFFSET + 0x10000000) ++ ++//#define MODULE_START (PAGE_OFFSET - 16*1048576) ++//#define MODULE_END (PAGE_OFFSET) ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/watchdog.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/watchdog.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,58 @@ ++#ifndef __WATCHDOG_H ++#define __WATCHDOG_H ++ ++#define WATCHDOG_BASE (IO_ADDRESS (SL2312_WAQTCHDOG_BASE)) ++#define WATCHDOG_COUNTER (WATCHDOG_BASE + 0x00) ++#define WATCHDOG_LOAD (WATCHDOG_BASE + 0x04) ++#define WATCHDOG_RESTART (WATCHDOG_BASE + 0x08) ++#define WATCHDOG_CR (WATCHDOG_BASE + 0x0C) ++#define WATCHDOG_STATUS (WATCHDOG_BASE + 0x10) ++#define WATCHDOG_CLEAR (WATCHDOG_BASE + 0x14) ++#define WATCHDOG_INTRLEN (WATCHDOG_BASE + 0x18) ++ ++#define WATCHDOG_WDENABLE_MSK (0x00000001) ++#define WATCHDOG_WDENABLE_OFST (0) ++#define WATCHDOG_WDRST_MSK (0x00000002) ++#define WATCHDOG_WDRST_OFST (1) ++#define WATCHDOG_WDINTR_MSK (0x00000004) ++#define WATCHDOG_WDINTR_OFST (2) ++#define WATCHDOG_WDEXT_MSK (0x00000008) ++#define WATCHDOG_WDEXT_OFST (3) ++#define WATCHDOG_WDCLOCK_MSK (0x00000010) ++#define WATCHDOG_WDCLOCK_OFST (4) ++#define WATCHDOG_CR_MASK (0x0000001F) ++ ++#define WATCHDOG_CLEAR_STATUS 0x1 ++#define WATCHDOG_ENABLE 1 ++#define WATCHDOG_DISABLE 0 ++#define WATCHDOG_RESTART_VALUE 0x5AB9 ++ ++#define WATCHDOG_MINOR 130 ++ ++#define WATCHDOG_IOCTRL_DISABLE 0x01 ++#define WATCHDOG_IOCTRL_SETTIME 0x02 ++#define WATCHDOG_IOCTRL_ENABLE 0x03 ++#define WATCHDOG_IOCTRL_RESTART 0x04 ++ ++#define WATCHDOG_TIMEOUT_SCALE APB_CLK ++#define WATCHDOG_TIMEOUT_MARGIN 30 ++#define WATCHDOG_DRIVER_OPEN 1 ++#define WATCHDOG_DRIVER_CLOSE 0 ++ ++ ++static void watchdog_disable(void); ++static void watchdog_enable(void); ++static int watchdog_open(struct inode *, struct file *); ++static int watchdog_release(struct inode *, struct file *); ++static ssize_t watchdog_read(struct file *, char *, size_t, loff_t *); ++static ssize_t watchdog_write(struct file *, const char *, size_t, loff_t *); ++static int watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long); ++#ifdef WATCHDOG_TEST ++static void watchdog_fire(int, void *, struct pt_regs *); ++#endif ++ ++ ++ ++ ++ ++#endif +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/xor.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/xor.h 2008-03-13 17:48:24.508798285 +0200 +@@ -0,0 +1,29 @@ ++/* ++ * include/asm-arm/arch-sl2312/xor.h ++ * ++ * Copyright (C) 2005 Storlink Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _ASM_ARCH_XOR_H ++#define _ASM_ARCH_XOR_H ++ ++/* ++ * Function prototypes ++ */ ++void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2); ++ ++void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3); ++ ++void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4); ++ ++void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5); ++ ++#endif /* _ASM_ARCH_XOR_H */ ++ +Index: linux-2.6.23.16/include/asm-arm/cacheflush.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/cacheflush.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/asm-arm/cacheflush.h 2008-03-13 17:48:24.508798285 +0200 +@@ -46,6 +46,18 @@ + # define MULTI_CACHE 1 + #endif + ++/*********************************************************************** ++ * Storlink SoC -- Cache ++ ***********************************************************************/ ++#if defined(CONFIG_CPU_FA526) ++# ifdef _CACHE ++# define MULTI_CACHE 1 ++# else ++# define _CACHE fa ++# endif ++#endif ++/***********************************************************************/ ++ + #if defined(CONFIG_CPU_ARM926T) + # ifdef _CACHE + # define MULTI_CACHE 1 +Index: linux-2.6.23.16/include/asm-arm/page.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/page.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/asm-arm/page.h 2008-03-13 17:48:24.508798285 +0200 +@@ -74,6 +74,18 @@ + # endif + #endif + ++/*********************************************************************** ++ * Storlink SoC -- flash ++ ***********************************************************************/ ++#ifdef CONFIG_CPU_COPY_FA ++# ifdef _USER ++# define MULTI_USER 1 ++# else ++# define _USER fa ++# endif ++#endif ++/***********************************************************************/ ++ + #ifdef CONFIG_CPU_SA1100 + # ifdef _USER + # define MULTI_USER 1 +Index: linux-2.6.23.16/include/asm-arm/proc-fns.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/proc-fns.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/asm-arm/proc-fns.h 2008-03-13 17:48:24.508798285 +0200 +@@ -89,6 +89,14 @@ + # define CPU_NAME cpu_arm922 + # endif + # endif ++# ifdef CONFIG_CPU_FA526 ++# ifdef CPU_NAME ++# undef MULTI_CPU ++# define MULTI_CPU ++# else ++# define CPU_NAME cpu_fa526 ++# endif ++# endif + # ifdef CONFIG_CPU_ARM925T + # ifdef CPU_NAME + # undef MULTI_CPU +Index: linux-2.6.23.16/include/asm-arm/tlbflush.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/tlbflush.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/asm-arm/tlbflush.h 2008-03-13 17:58:18.542650345 +0200 +@@ -39,6 +39,8 @@ + #define TLB_V6_D_ASID (1 << 17) + #define TLB_V6_I_ASID (1 << 18) + ++#define TLB_DINVAL (1 << 28) ++#define TLB_BTB (1 << 29) + #define TLB_DCLEAN (1 << 30) + #define TLB_WB (1 << 31) + +@@ -52,6 +54,7 @@ + * v4wb - ARMv4 with write buffer without I TLB flush entry instruction + * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction + * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction ++ * fa - ARMv4 with write buffer with UTLB and branch target buffer (BTB) + */ + #undef _TLB + #undef MULTI_TLB +@@ -86,6 +89,44 @@ + # define v4_always_flags (-1UL) + #endif + ++#ifdef CONFIG_CPU_FA_BTB ++#define __TLB_BTB TLB_BTB ++#else ++#define __TLB_BTB 0 ++#endif ++ ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++#define __TLB_WB 0 ++#else ++#define __TLB_WB TLB_WB ++#endif ++ ++/* Fix buggy CPU which doesn't invalidate Dcache properly */ ++#ifdef CONFIG_CPU_FA520 ++#define __TLB_DINVAL TLB_DINVAL ++#elif defined(CONFIG_CPU_FA526) ++//#define __TLB_DINVAL TLB_DINVAL ++#define __TLB_DINVAL 0 ++#else ++#define __TLB_DINVAL 0 ++#endif ++ ++#define fa_tlb_flags (__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \ ++ TLB_V4_U_FULL | TLB_V4_U_PAGE) ++ ++#ifdef CONFIG_CPU_TLB_FA ++# define fa_possible_flags fa_tlb_flags ++# define fa_always_flags fa_tlb_flags ++# ifdef _TLB ++# define MULTI_TLB 1 ++# else ++# define _TLB fa ++# endif ++#else ++# define fa_possible_flags 0 ++# define fa_always_flags (-1UL) ++#endif ++ + #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) +@@ -246,12 +287,14 @@ + v4_possible_flags | \ + v4wbi_possible_flags | \ + v4wb_possible_flags | \ ++ fa_possible_flags | \ + v6wbi_possible_flags) + + #define always_tlb_flags (v3_always_flags & \ + v4_always_flags & \ + v4wbi_always_flags & \ + v4wb_always_flags & \ ++ fa_always_flags & \ + v6wbi_always_flags) + + #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) +@@ -261,6 +304,9 @@ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -281,6 +327,13 @@ + dsb(); + isb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void local_flush_tlb_mm(struct mm_struct *mm) +@@ -289,6 +342,9 @@ + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -317,6 +373,14 @@ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } ++ + } + + static inline void +@@ -327,6 +391,9 @@ + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -357,6 +424,13 @@ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +@@ -366,6 +440,9 @@ + + kaddr &= PAGE_MASK; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -386,6 +463,12 @@ + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | +@@ -412,6 +495,7 @@ + */ + static inline void flush_pmd_entry(pmd_t *pmd) + { ++ const unsigned int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) +@@ -419,15 +503,30 @@ + : : "r" (pmd) : "cc"); + if (tlb_flag(TLB_WB)) + dsb(); ++ ++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void clean_pmd_entry(pmd_t *pmd) + { ++ const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1 + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); ++ ++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + #undef tlb_flag +Index: linux-2.6.23.16/include/asm-arm/xor.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/xor.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/asm-arm/xor.h 2008-03-13 17:48:24.508798285 +0200 +@@ -139,3 +139,18 @@ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + } while (0) ++ ++#ifdef CONFIG_GEMINI_XOR_ACCE ++#include <asm/arch/xor.h> ++static struct xor_block_template xor_block_gemini = { ++ .name = "gemini xor acceleration", ++ .do_2 = xor_gemini_2, ++ .do_3 = xor_gemini_3, ++ .do_4 = xor_gemini_4, ++ .do_5 = xor_gemini_5,}; ++#undef XOR_TRY_TEMPLATES ++#define XOR_TRY_TEMPLATES \ ++ do { \ ++ xor_speed(&xor_block_gemini); \ ++ } while (0) ++#endif +Index: linux-2.6.23.16/include/linux/apm_bios.h +=================================================================== +--- linux-2.6.23.16.orig/include/linux/apm_bios.h 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/include/linux/apm_bios.h 2008-03-13 17:48:24.508798285 +0200 +@@ -217,4 +217,24 @@ + #define APM_IOC_STANDBY _IO('A', 1) + #define APM_IOC_SUSPEND _IO('A', 2) + ++// add by jason for power control ++struct pwc_ioctl_data { ++ unsigned int action; // sword struct ++ unsigned int data; // stand shutdown time for PWC_SET_SHUT_TIME ++ // stand shutdown source for PWC_WAIT_BTN ++}; ++ ++#define POWEROFF 0x01 ++#define RESTORE_DEFAULT 0x02 ++#define SYSTEM_REBOOT 0x04 ++ ++#define PWR_SRC_CIR 0x10 ++#define PWR_SRC_RTC 0x20 ++#define PWR_SRC_BTN 0x40 ++ ++#define PWC_IOCTL_BASE 'A' // use linux APM ioctl ++#define PWC_SET_SHUT_TIME _IOW('A', 16, struct pwc_ioctl_data) ++#define PWC_WAIT_BTN _IOR('A', 17, struct pwc_ioctl_data) ++#define PWC_SHUTDOWN _IO ('A', 18) ++ + #endif /* LINUX_APM_H */ +Index: linux-2.6.23.16/kernel/time.c +=================================================================== +--- linux-2.6.23.16.orig/kernel/time.c 2008-03-13 17:46:04.500819685 +0200 ++++ linux-2.6.23.16/kernel/time.c 2008-03-13 17:48:24.508798285 +0200 +@@ -76,6 +76,7 @@ + * why not move it into the appropriate arch directory (for those + * architectures that need it). + */ ++extern void rtc_set_time_second(unsigned int second); + + asmlinkage long sys_stime(time_t __user *tptr) + { +@@ -87,6 +88,10 @@ + + tv.tv_nsec = 0; + ++#ifdef CONFIG_SL2312_RTC ++ rtc_set_time_second(tv.tv_sec); ++#endif ++ + err = security_settime(&tv, NULL); + if (err) + return err; diff --git a/target/linux/storm/patches/1002-gmac.patch b/target/linux/storm/patches/1002-gmac.patch new file mode 100644 index 0000000000..82c72fbc35 --- /dev/null +++ b/target/linux/storm/patches/1002-gmac.patch @@ -0,0 +1,18584 @@ +Index: linux-2.6.23.16/drivers/net/sl2312_emac.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl2312_emac.c 2008-03-15 16:59:16.361058585 +0200 +@@ -0,0 +1,4604 @@ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch-sl2312/irqs.h> ++#include <asm/arch/it8712.h> ++#include <asm/arch/sl2312.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/sysctl_storlink.h> ++ ++#define BIG_ENDIAN 0 ++ ++#define GMAC_DEBUG 0 ++ ++#define GMAC_PHY_IF 2 ++ ++/* define PHY address */ ++#define HPHY_ADDR 0x01 ++#define GPHY_ADDR 0x02 ++ ++#define CONFIG_ADM_6999 1 ++/* define chip information */ ++#define DRV_NAME "SL2312" ++#define DRV_VERSION "0.1.1" ++#define SL2312_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION ++ ++/* define TX/RX descriptor parameter */ ++#define MAX_ETH_FRAME_SIZE 1920 ++#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE ++#define TX_DESC_NUM 128 ++#define TX_BUF_TOT_LEN (TX_BUF_SIZE * TX_DESC_NUM) ++#define RX_BUF_SIZE MAX_ETH_FRAME_SIZE ++#define RX_DESC_NUM 256 ++#define RX_BUF_TOT_LEN (RX_BUF_SIZE * RX_DESC_NUM) ++#define MAX_ISR_WORK 20 ++ ++unsigned int int_status = 0; ++ ++/* define GMAC base address */ ++#define GMAC_PHYSICAL_BASE_ADDR (SL2312_GMAC_BASE) ++#define GMAC_BASE_ADDR (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR)) ++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++#define GMAC0_BASE (IO_ADDRESS(SL2312_GMAC0_BASE)) ++#define GMAC1_BASE (IO_ADDRESS(SL2312_GMAC1_BASE)) ++ ++/* memory management utility */ ++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) ++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) ++ ++//#define gmac_read_reg(offset) (readl(GMAC_BASE_ADDR + offset)) ++//#define gmac_write_reg(offset,data,mask) writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset)) ++ ++/* define owner bit */ ++#define CPU 0 ++#define DMA 1 ++ ++#define ACTIVE 1 ++#define NONACTIVE 0 ++ ++#define CONFIG_SL_NAPI ++ ++#ifndef CONFIG_SL2312_MPAGE ++#define CONFIG_SL2312_MPAGE ++#endif ++ ++#ifdef CONFIG_SL2312_MPAGE ++#include <linux/skbuff.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#endif ++ ++#ifndef CONFIG_TXINT_DISABLE ++//#define CONFIG_TXINT_DISABLE ++#endif ++ ++enum phy_state ++{ ++ LINK_DOWN = 0, ++ LINK_UP = 1 ++}; ++ ++ ++/* transmit timeout value */ ++#define TX_TIMEOUT (6*HZ) ++ ++/***************************************/ ++/* the offset address of GMAC register */ ++/***************************************/ ++enum GMAC_REGISTER { ++ GMAC_STA_ADD0 = 0x0000, ++ GMAC_STA_ADD1 = 0x0004, ++ GMAC_STA_ADD2 = 0x0008, ++ GMAC_RX_FLTR = 0x000c, ++ GMAC_MCAST_FIL0 = 0x0010, ++ GMAC_MCAST_FIL1 = 0x0014, ++ GMAC_CONFIG0 = 0x0018, ++ GMAC_CONFIG1 = 0x001c, ++ GMAC_CONFIG2 = 0x0020, ++ GMAC_BNCR = 0x0024, ++ GMAC_RBNR = 0x0028, ++ GMAC_STATUS = 0x002c, ++ GMAC_IN_DISCARDS= 0x0030, ++ GMAC_IN_ERRORS = 0x0034, ++ GMAC_IN_MCAST = 0x0038, ++ GMAC_IN_BCAST = 0x003c, ++ GMAC_IN_MAC1 = 0x0040, ++ GMAC_IN_MAC2 = 0x0044 ++}; ++ ++/*******************************************/ ++/* the offset address of GMAC DMA register */ ++/*******************************************/ ++enum GMAC_DMA_REGISTER { ++ GMAC_DMA_DEVICE_ID = 0xff00, ++ GMAC_DMA_STATUS = 0xff04, ++ GMAC_TXDMA_CTRL = 0xff08, ++ GMAC_TXDMA_FIRST_DESC = 0xff0c, ++ GMAC_TXDMA_CURR_DESC = 0xff10, ++ GMAC_RXDMA_CTRL = 0xff14, ++ GMAC_RXDMA_FIRST_DESC = 0xff18, ++ GMAC_RXDMA_CURR_DESC = 0xff1c, ++}; ++ ++/*******************************************/ ++/* the register structure of GMAC */ ++/*******************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ ++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ ++#else ++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ ++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ ++#endif ++ } bits; ++} GMAC_STA_ADD1_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 27; ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++#else ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int : 27; ++#endif ++ } bits; ++} GMAC_RX_FLTR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0018 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 10; ++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ ++ unsigned int rising_latch : 1; ++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ ++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ ++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ ++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ ++ unsigned int tx_fc_en : 1; /* TX flow control enable */ ++ unsigned int rx_fc_en : 1; /* RX flow control enable */ ++ unsigned int sim_test : 1; /* speed up timers in simulation */ ++ unsigned int dis_col : 1; /* disable 16 collisions abort function */ ++ unsigned int dis_bkoff : 1; /* disable back-off function */ ++ unsigned int max_len : 3; /* maximum receive frame length allowed */ ++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ ++ unsigned int : 1; /* reserved */ ++ unsigned int loop_back : 1; /* transmit data loopback enable */ ++ unsigned int dis_rx : 1; /* disable receive */ ++ unsigned int dis_tx : 1; /* disable transmit */ ++#else ++ unsigned int dis_tx : 1; /* disable transmit */ ++ unsigned int dis_rx : 1; /* disable receive */ ++ unsigned int loop_back : 1; /* transmit data loopback enable */ ++ unsigned int : 1; /* reserved */ ++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ ++ unsigned int max_len : 3; /* maximum receive frame length allowed */ ++ unsigned int dis_bkoff : 1; /* disable back-off function */ ++ unsigned int dis_col : 1; /* disable 16 collisions abort function */ ++ unsigned int sim_test : 1; /* speed up timers in simulation */ ++ unsigned int rx_fc_en : 1; /* RX flow control enable */ ++ unsigned int tx_fc_en : 1; /* TX flow control enable */ ++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ ++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ ++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ ++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ ++ unsigned int rising_latch : 1; ++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ ++ unsigned int : 10; ++#endif ++ } bits; ++} GMAC_CONFIG0_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_001c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 28; ++ unsigned int buf_size : 4; /* per packet buffer size */ ++#else ++ unsigned int buf_size : 4; /* per packet buffer size */ ++ unsigned int : 28; ++#endif ++ } bits; ++} GMAC_CONFIG1_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0020 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++#else ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++#endif ++ } bits; ++} GMAC_CONFIG2_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0024 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 16; ++ unsigned int buf_num : 16; /* return buffer number from software */ ++#else ++ unsigned int buf_num : 16; /* return buffer number from software */ ++ unsigned int : 16; ++#endif ++ } bits; ++} GMAC_BNCR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0028 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 16; ++ unsigned int buf_remain : 16; /* remaining buffer number */ ++#else ++ unsigned int buf_remain : 16; /* remaining buffer number */ ++ unsigned int : 16; ++#endif ++ } bits; ++} GMAC_RBNR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_002c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 25; ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int link : 1; /* link status */ ++#else ++ unsigned int link : 1; /* link status */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int : 25; ++#endif ++ } bits; ++} GMAC_STATUS_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_009 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 10; ++ unsigned int tx_fail : 1; /* Tx fail interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ ++ unsigned int : 6; ++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ ++#else ++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ ++ unsigned int : 6; ++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int tx_fail : 1; /* Tx fail interrupt */ ++ unsigned int : 10; ++#endif ++ } bits; ++} GMAC_INT_MASK_T; ++ ++ ++/*******************************************/ ++/* the register structure of GMAC DMA */ ++/*******************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff00 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 7; /* reserved */ ++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ ++ unsigned int tx_err_code : 4; /* TxDMA error code */ ++ unsigned int rx_err_code : 4; /* RxDMA error code */ ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int rx_err_code : 4; /* RxDMA error code */ ++ unsigned int tx_err_code : 4; /* TxDMA error code */ ++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ ++ unsigned int : 7; /* reserved */ ++#endif ++ } bits; ++} GMAC_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff04 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int : 1; /* Tx fail interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ ++ unsigned int : 1; ++ unsigned int : 1; ++ unsigned int : 3; ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 1; /* Tx fail interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ ++#else ++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int : 1; /* Tx fail interrupt mask */ ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 3; ++ unsigned int : 1; ++ unsigned int : 1; ++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int : 1; /* Tx fail interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++#endif ++ } bits; ++} GMAC_DMA_STATUS_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff08 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} GMAC_TXDMA_CTRL_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff0c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} GMAC_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff10 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} GMAC_TXDMA_CURR_DESC_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff14 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} GMAC_RXDMA_CTRL_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff18 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} GMAC_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff1c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} GMAC_RXDMA_CURR_DESC_T; ++ ++ ++/********************************************/ ++/* Descriptor Format */ ++/********************************************/ ++ ++typedef struct descriptor_t ++{ ++ union frame_control_t ++ { ++ unsigned int bits32; ++ struct bits_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int csum_state : 3; /* checksum error status */ ++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ ++ unsigned int frame_state: 3; /* reference Rx Status1 */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int frame_state: 3; /* reference Rx Status1 */ ++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ ++ unsigned int csum_state : 3; /* checksum error status */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_rx; ++ ++ struct bits_0001 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 6; ++ unsigned int success_tx : 1; /* successful transmitted */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int success_tx : 1; /* successful transmitted */ ++ unsigned int : 6; ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_tx_in; ++ ++ struct bits_0002 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 2; ++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ ++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ ++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ ++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ ++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ ++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ ++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ ++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ ++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ ++ unsigned int : 2; ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_tx_out; ++ ++ } frame_ctrl; ++ ++ union flag_status_t ++ { ++ unsigned int bits32; ++ struct bits_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int priority : 3; /* user priority extracted from receiving frame*/ ++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ ++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ ++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ ++#else ++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ ++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ ++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ ++ unsigned int priority : 3; /* user priority extracted from receiving frame*/ ++#endif ++ } bits_rx_status; ++ ++ struct bits_0005 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int priority : 3; /* user priority to transmit*/ ++ unsigned int cfi : 1; /* cfi to transmit*/ ++ unsigned int vlan_id :12; /* VLAN ID to transmit */ ++ unsigned int frame_count:16; /* total tx frame byte count */ ++#else ++ unsigned int frame_count:16; /* total tx frame byte count */ ++ unsigned int vlan_id :12; /* VLAN ID to transmit */ ++ unsigned int cfi : 1; /* cfi to transmit*/ ++ unsigned int priority : 3; /* user priority to transmit*/ ++#endif ++ } bits_tx_flag; ++ } flag_status; ++ ++ unsigned int buf_adr; /* data buffer address */ ++ ++ union next_desc_t ++ { ++ unsigned int next_descriptor; ++ struct bits_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar :28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++#else ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar :28; /* next descriptor address */ ++#endif ++ } bits; ++ } next_desc; ++} GMAC_DESCRIPTOR_T; ++ ++typedef struct gmac_conf { ++ struct net_device *dev; ++ int portmap; ++ int vid; ++ int flag; /* 1: active 0: non-active */ ++} sys_gmac_conf; ++ ++struct gmac_private { ++ unsigned char *tx_bufs; /* Tx bounce buffer region. */ ++ unsigned char *rx_bufs; ++ GMAC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ ++ GMAC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ ++ GMAC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ ++ GMAC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ ++ GMAC_DESCRIPTOR_T *tx_finished_desc; ++ GMAC_DESCRIPTOR_T *rx_finished_desc; ++ unsigned long cur_tx; ++ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ ++ unsigned int tx_flag; ++ unsigned long dirty_tx; ++ unsigned char *tx_buf[TX_DESC_NUM]; /* Tx bounce buffers */ ++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ ++ struct net_device_stats stats; ++ pid_t thr_pid; ++ wait_queue_head_t thr_wait; ++ struct completion thr_exited; ++ spinlock_t lock; ++ int time_to_die; ++ unsigned int tx_desc_hdr[GMAC_PHY_IF]; /* the descriptor which sw can fill */ ++ unsigned int tx_desc_tail[GMAC_PHY_IF]; /* the descriptor which is not cleaned yet */ ++}; ++ ++ ++struct reg_ioctl_data { ++ unsigned int reg_addr; /* the register address */ ++ unsigned int val_in; /* data write to the register */ ++ unsigned int val_out; /* data read from the register */ ++}; ++ ++#ifdef CONFIG_SL2312_MPAGE ++typedef struct tx_data_t { ++ int freeable; // 1 when it's skb. it can be freed in tx interrupt handler ++ struct sk_buff* skb; // skb ++ int desc_in_use; // 1 when the desc is in use. 0 when desc is available. ++ long end_seq; // to find out packets are in seq. ++ // so this value is the seq of next packet. ++} tx_data; ++#endif ++ ++/************************************************************* ++ * Global Variable ++ *************************************************************/ ++struct semaphore sem_gmac; /* semaphore for share pins issue */ ++ ++/************************************************************* ++ * Static Global Variable ++ *************************************************************/ ++// static unsigned int MAC_BASE_ADDR = GMAC0_BASE; ++static unsigned int gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE}; ++static unsigned int gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1}; ++static struct net_device *gmac_dev[GMAC_PHY_IF]; ++ ++static unsigned int FLAG_SWITCH=0; /* if 1-->switch chip presented. if 0-->switch chip unpresented */ ++static unsigned int flow_control_enable[GMAC_PHY_IF] = {1,1}; ++static unsigned int pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN}; ++static unsigned int tx_desc_virtual_base[GMAC_PHY_IF]; ++static unsigned int rx_desc_virtual_base[GMAC_PHY_IF]; ++static unsigned int full_duplex = 1; ++static unsigned int speed = 1; ++#ifdef CONFIG_SL2312_MPAGE ++static tx_data tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; ++#else ++static struct sk_buff *tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; ++#endif ++static struct sk_buff *rx_skb[GMAC_PHY_IF][RX_DESC_NUM]; ++static unsigned int tx_desc_start_adr[GMAC_PHY_IF]; ++static unsigned int rx_desc_start_adr[GMAC_PHY_IF]; ++static unsigned char eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25}; ++static unsigned char eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe}; ++static unsigned int next_tick = 3 * HZ; ++ ++static unsigned int phy_addr[GMAC_PHY_IF] = {0x01,0x02}; /* define PHY address */ ++ ++DECLARE_WAIT_QUEUE_HEAD(gmac_queue); ++//static wait_queue_t wait; ++ ++struct gmac_conf VLAN_conf[] = { ++#ifdef CONFIG_ADM_6999 ++ { (struct net_device *)0,0x7F,1 }, ++ { (struct net_device *)0,0x80,2 } ++#endif ++#ifdef CONFIG_ADM_6996 ++ { (struct net_device *)0,0x0F,1 }, ++ { (struct net_device *)0,0x10,2 } ++#endif ++}; ++ ++#define NUM_VLAN_IF (sizeof(VLAN_conf)/sizeof(struct gmac_conf)) ++ ++ ++/************************************************/ ++/* GMAC function declare */ ++/************************************************/ ++ ++unsigned int mii_read(unsigned char phyad,unsigned char regad); ++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value); ++static void gmac_set_phy_status(struct net_device *dev); ++static void gmac_get_phy_status(struct net_device *dev); ++static int gmac_phy_thread (void *data); ++static int gmac_set_mac_address(struct net_device *dev, void *addr); ++static void gmac_tx_timeout(struct net_device *dev); ++static void gmac_tx_packet_complete(struct net_device *dev); ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static void gmac_set_rx_mode(struct net_device *dev); ++static void gmac_rx_packet(struct net_device *dev); ++static int gmac_open (struct net_device *dev); ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); ++ ++static unsigned int gmac_get_dev_index(struct net_device *dev); ++static unsigned int gmac_select_interface(struct net_device *dev); ++ ++#ifdef CONFIG_SL2312_MPAGE ++int printk_all(int dev_index, struct gmac_private* tp); ++#endif ++ ++/****************************************/ ++/* SPI Function Declare */ ++/****************************************/ ++void SPI_write(unsigned char addr,unsigned int value); ++unsigned int SPI_read(unsigned char table,unsigned char addr); ++void SPI_write_bit(char bit_EEDO); ++unsigned int SPI_read_bit(void); ++void SPI_default(void); ++void SPI_reset(unsigned char rstype,unsigned char port_cnt); ++void SPI_pre_st(void); ++void SPI_CS_enable(unsigned char enable); ++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask); ++void SPI_Set_tag(unsigned int port,unsigned tag); ++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask); ++unsigned int SPI_Get_PVID(unsigned int port); ++void SPI_mac_lock(unsigned int port, unsigned char lock); ++void SPI_get_port_state(unsigned int port); ++void SPI_port_enable(unsigned int port,unsigned char enable); ++unsigned int SPI_get_identifier(void); ++void SPI_get_status(unsigned int port); ++ ++/****************************************/ ++/* VLAN Function Declare */ ++/****************************************/ ++int getVLANfromdev (struct net_device *dev ); ++struct net_device * getdevfromVLAN( int VID); ++ ++ ++ ++/************************************************/ ++/* function body */ ++/************************************************/ ++#if 0 ++void hw_memcpy(void *to,const void *from,unsigned long n) ++{ ++ writel(from,SL2312_DRAM_CTRL_BASE+0x20); /* set source address */ ++ writel(to,SL2312_DRAM_CTRL_BASE+0x24); /* set destination address */ ++ writel(n,SL2312_DRAM_CTRL_BASE+0x28); /* set byte count */ ++ writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c); ++ while (readl(SL2312_DRAM_CTRL_BASE+0x2c)); ++} ++#endif ++ ++static unsigned int gmac_read_reg(unsigned int addr) ++{ ++ unsigned int reg_val; ++// unsigned int flags; ++// spinlock_t lock; ++ ++// spin_lock_irqsave(&lock, flags); ++ reg_val = readl(addr); // Gary Chen ++// spin_unlock_irqrestore(&lock, flags); ++ return (reg_val); ++} ++ ++static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask) ++{ ++ unsigned int reg_val; ++ //unsigned int *addr; ++// unsigned int flags; ++// spinlock_t lock; ++ ++// spin_lock_irqsave(&lock, flags); ++ reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask); ++ writel(reg_val,addr); ++// spin_unlock_irqrestore(&lock, flags); ++ return; ++} ++ ++ ++static void gmac_sw_reset(struct net_device *dev) ++{ ++ unsigned int index; ++ unsigned int reg_val; ++ ++ index = gmac_get_dev_index(dev); ++ if (index==0) ++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020; /* GMAC0 S/W reset */ ++ else ++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040; /* GMAC1 S/W reset */ ++ ++ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c); ++ return; ++} ++ ++static void gmac_get_mac_address(void) ++{ ++#ifdef CONFIG_MTD ++ extern int get_vlaninfo(vlaninfo* vlan); ++ static vlaninfo vlan[2]; ++ ++ if (get_vlaninfo(&vlan[0])) ++ { ++ memcpy(eth0_mac,vlan[0].mac,6); ++ VLAN_conf[0].vid = vlan[0].vlanid; ++ VLAN_conf[0].portmap = vlan[0].vlanmap; ++ memcpy(eth1_mac,vlan[1].mac,6); ++ VLAN_conf[1].vid = vlan[1].vlanid; ++ VLAN_conf[1].portmap = vlan[1].vlanmap; ++ } ++#else ++ unsigned int reg_val; ++ ++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); ++ eth0_mac[4] = (reg_val & 0xff00) >> 8; ++ eth0_mac[5] = reg_val & 0x00ff; ++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); ++ eth1_mac[4] = (reg_val & 0xff00) >> 8; ++ eth1_mac[5] = reg_val & 0x00ff; ++#endif ++ return; ++} ++ ++static unsigned int gmac_get_dev_index(struct net_device *dev) ++{ ++ unsigned int i; ++ ++ /* get device index number */ ++ for (i=0;i<GMAC_PHY_IF;i++) ++ { ++ if (gmac_dev[i]==dev) ++ { ++ return(i); ++ } ++ } ++ return (0xff); ++} ++ ++static unsigned int gmac_select_interface(struct net_device *dev) ++{ ++ unsigned int index; ++ ++ index = gmac_get_dev_index(dev); ++ // MAC_BASE_ADDR = gmac_base_addr[index]; // Gary Chen ++ return (index); ++} ++ ++ ++static void gmac_dump_register(struct net_device *dev) ++{ ++#if 0 ++ unsigned int i,val,index; ++ ++ index = gmac_select_interface(dev); ++ ++ printk("========== GMAC%d ==========\n",index); ++ for (i=0;i<=0x7c;i=i+4) ++ { ++ val = gmac_read_reg(gmac_base_addr[index] + i); ++ printk("offset = %08x value = %08x\n",i,val); ++ } ++ for (i=0xff00;i<=0xff7c;i=i+4) ++ { ++ val = gmac_read_reg(gmac_base_addr[index] + i); ++ printk("offset = %08x value = %08x\n",i,val); ++ } ++#endif ++} ++ ++static int gmac_init_chip(struct net_device *dev) ++{ ++ GMAC_RBNR_T rbnr_val,rbnr_mask; ++ GMAC_CONFIG2_T config2_val; ++ GMAC_CONFIG0_T config0,config0_mask; ++ GMAC_CONFIG1_T config1; ++ struct sockaddr sock; ++ unsigned int status; ++ unsigned int phy_mode; ++ unsigned int index; ++ ++ index = gmac_get_dev_index(dev); ++ ++ /* set GMAC RMII mode */ ++ if (index==0) ++ phy_mode = 0; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ ++ else ++ phy_mode = 2; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ ++ ++ /* set PHY operation mode */ ++ status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1); ++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f); ++ ++ /* set station MAC address1 and address2 */ ++ if (index==0) ++ memcpy(&sock.sa_data[0],ð0_mac[0],6); ++ else ++ memcpy(&sock.sa_data[0],ð1_mac[0],6); ++ gmac_set_mac_address(dev,(void *)&sock); ++ ++ /* set RX_FLTR register to receive all multicast packet */ ++ gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f); ++ //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f); ++ ++ /* set per packet buffer size */ ++ config1.bits32 = 0; ++ config1.bits.buf_size = 11; /* buffer size = 2048-byte */ ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f); ++ ++ /* set flow control threshold */ ++ config2_val.bits32 = 0; ++ config2_val.bits.set_threshold = RX_DESC_NUM/4; ++ config2_val.bits.rel_threshold = RX_DESC_NUM*3/4; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff); ++ ++ /* init remaining buffer number register */ ++ rbnr_val.bits32 = 0; ++ rbnr_val.bits.buf_remain = RX_DESC_NUM; ++ rbnr_mask.bits32 = 0; ++ rbnr_mask.bits.buf_remain = 0xffff; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32); ++ ++ /* disable TX/RX and disable internal loop back */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.max_len = 2; ++ if (flow_control_enable[index]==1) ++ { ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ printk("Enable MAC Flow Control...\n"); ++ } ++ else ++ { ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ printk("Disable MAC Flow Control...\n"); ++ } ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ ++ config0.bits.inv_rx_clk = 0; ++ config0.bits.rising_latch = 1; ++ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ ++ config0_mask.bits.max_len = 7; ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ config0_mask.bits.loop_back = 1; ++ config0_mask.bits.inv_rx_clk = 1; ++ config0_mask.bits.rising_latch = 1; ++ config0_mask.bits.ipv4_tss_rx_en = 1; ++ config0_mask.bits.ipv6_tss_rx_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ ++ return (0); ++} ++ ++static void gmac_enable_tx_rx(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 0; /* enable rx */ ++ config0.bits.dis_tx = 0; /* enable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++} ++ ++static void gmac_disable_tx_rx(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++} ++ ++#ifdef CONFIG_SL_NAPI ++static int gmac_rx_poll_ga(struct net_device *dev, int *budget) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int index; ++ unsigned int dev_index; ++ int work = 0; ++ int work_done = 0; ++ int quota = min(dev->quota, *budget); ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (;;) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ work_done = 1; ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); ++ } ++ ++ if (work++ >= quota ) ++ { ++ break; ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ ++ dev->quota -= work; ++ *budget -= work; ++ if (work_done==1) ++ { ++ /* Receive descriptor is empty now */ ++ netif_rx_complete(dev); ++ /* enable receive interrupt */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ ++ return 0; ++ } ++ else ++ { ++ return -1; ++ } ++} ++ ++static int gmac_rx_poll_gb(struct net_device *dev, int *budget) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int index; ++ unsigned int dev_index; ++ int work = 0; ++ int work_done = 0; ++ int quota = min(dev->quota, *budget); ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (;;) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ work_done = 1; ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); ++ } ++ ++ if (work++ >= quota ) ++ { ++ break; ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ ++ dev->quota -= work; ++ *budget -= work; ++ if (work_done==1) ++ { ++ /* Receive descriptor is empty now */ ++ netif_rx_complete(dev); ++ /* enable receive interrupt */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ ++ return 0; ++ } ++ else ++ { ++ return -1; ++ } ++} ++ ++#endif ++ ++static void gmac_rx_packet(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int i,index; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (i=0;i<256;i++) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++} ++ ++#ifdef CONFIG_SL2312_MPAGE ++static inline void free_tx_buf(int dev_index, int desc_index) ++{ ++ if (tx_skb[dev_index][desc_index].freeable && ++ tx_skb[dev_index][desc_index].skb) { ++ struct sk_buff* skb = tx_skb[dev_index][desc_index].skb; ++ //printk("free_skb %x, len %d\n", skb, skb->len); ++#ifdef CONFIG_TXINT_DISABLE ++ dev_kfree_skb(skb); ++#else ++ dev_kfree_skb_irq(skb); ++#endif ++ tx_skb[dev_index][desc_index].skb = 0; ++ } ++} ++ ++#ifdef CONFIG_TXINT_DISABLE ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc, *next_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ unsigned int tx_current_descriptor = 0; ++ // int own_dma = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) { ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ } ++ next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ ++ for (;;) { ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ if (next_desc == tx_hw_complete_desc) ++ break; ++ if (next_desc->frame_ctrl.bits_tx_in.own == CPU) { ++ if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) { ++ tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } else { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; i<desc_cnt; i++) { ++ /* get tx skb buffer index */ ++ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ next_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); ++ /* release Tx descriptor to CPU */ ++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ next_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); ++ tp->tx_finished_desc = next_desc; ++// printk("finish tx_desc index %d\n", index); ++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ else ++ break; ++ } ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++#else ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ unsigned int tx_current_descriptor = 0; ++ // int own_dma = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ /* check tx status and accumulate tx statistics */ ++ for (;;) ++ { ++ ++ for (i=0;i<1000;i++) ++ { ++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); ++ if ( ((tx_current_descriptor & 0x00000003)==0x00000003) || /* only one descriptor */ ++ ((tx_current_descriptor & 0x00000003)==0x00000001) ) /* the last descriptor */ ++ { ++ break; ++ } ++ udelay(1); ++ } ++ if (i==1000) ++ { ++// gmac_dump_register(dev); ++// printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); ++// printk_all(dev_index, tp); ++ continue; ++ } ++ ++ /* get tx H/W completed descriptor virtual address */ ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++// tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ if (tp->tx_finished_desc == tx_hw_complete_desc ) // || ++ //tx_skb[dev_index][index].desc_in_use ) /* complete tx processing */ ++ { ++ break; ++ } ++ ++ for (;;) ++ { ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++ #if (GMAC_DEBUG==1) ++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || ++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) ++ { ++ printk("%s::Descriptor Processing Error !!!\n",__func__); ++ } ++ #endif ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) ++ { ++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } ++ else ++ { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */ ++ { ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ /* release Tx descriptor to CPU */ ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ ++ if (tp->tx_finished_desc == tx_hw_complete_desc ) ++ { ++ break; ++ } ++ } ++ else ++ { ++ break; ++ } ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++#endif ++#else ++ ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* get tx H/W completed descriptor virtual address */ ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ /* check tx status and accumulate tx statistics */ ++ for (;;) ++ { ++ if (tp->tx_finished_desc == tx_hw_complete_desc) /* complete tx processing */ ++ { ++ break; ++ } ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++#if (GMAC_DEBUG==1) ++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || ++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) ++ { ++ printk("%s::Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) ++ { ++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } ++ else ++ { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */ ++ { ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ if (tx_skb[dev_index][index]) ++ { ++ dev_kfree_skb_irq(tx_skb[dev_index][index]); ++ } ++ /* release Tx descriptor to CPU */ ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ if (tx_skb[dev_index][index]) ++ { ++ dev_kfree_skb_irq(tx_skb[dev_index][index]); ++ } ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++ ++ ++#endif ++ ++#if 0 ++static void gmac_weird_interrupt(struct net_device *dev) ++{ ++ gmac_dump_register(dev); ++} ++#endif ++ ++/* The interrupt handler does all of the Rx thread work and cleans up ++ after the Tx thread. */ ++static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ++{ ++ struct net_device *dev = (struct net_device *)dev_instance; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++// GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++// GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_DMA_STATUS_T status; ++ unsigned int i,dev_index; ++ int handled = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ handled = 1; ++ ++#ifdef CONFIG_SL_NAPI ++ disable_irq(gmac_irq[dev_index]); /* disable GMAC interrupt */ ++ ++ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); /* read DMA status */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); /* clear DMA status */ ++ ++ if (status.bits.rx_overrun == 1) ++ { ++ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR)); ++ gmac_dump_register(dev); ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ; ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ /* restart Rx DMA process */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ } ++ ++ /* process rx packet */ ++ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1))) ++ { ++ if (likely(netif_rx_schedule_prep(dev))) ++ { ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000); /* disable rx interrupt */ ++ __netif_rx_schedule(dev); ++ } ++ } ++#ifndef CONFIG_TXINT_DISABLE ++ /* process tx packet */ ++ if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1))) ++ { ++ gmac_tx_packet_complete(dev); ++ } ++#endif ++ ++ enable_irq(gmac_irq[dev_index]); /* enable GMAC interrupt */ ++ return IRQ_RETVAL(handled); ++#endif ++ ++ /* disable GMAC interrupt */ ++ disable_irq(gmac_irq[dev_index]); ++ for (i=0;i<MAX_ISR_WORK;i++) ++ { ++ /* read DMA status */ ++ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); ++int_status = status.bits32; ++ /* clear DMA status */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); ++ ++ if ((status.bits32 & 0xffffc000)==0) ++ { ++ break; ++ } ++ ++ if (status.bits.rx_overrun == 1) ++ { ++ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR)); ++ gmac_dump_register(dev); ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ; ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ /* restart Rx DMA process */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ } ++ ++ /* receive rx interrupt */ ++ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1))) ++ { ++ gmac_rx_packet(dev); ++// gmac_tx_packet_complete(dev); ++ } ++ ++ /* receive tx interrupt */ ++ // if (netif_running(dev) && (status.bits.ts_finish==1)) ++#ifndef CONFIG_TXINT_DISABLE ++ if (netif_running(dev) && ((status.bits.ts_eofi==1)|| ++ (status.bits.ts_finish==1))) ++ { ++ gmac_tx_packet_complete(dev); ++ } ++#endif ++ /* check uncommon events */ ++/* if ((status.bits32 & 0x632fc000)!=0) ++ { ++ printk("%s::DMA Status = %08x \n",__func__,status.bits32); ++ gmac_weird_interrupt(dev); ++ } ++*/ ++ } ++ ++ /* enable GMAC interrupt */ ++ enable_irq(gmac_irq[dev_index]); ++ //printk("gmac_interrupt complete!\n\n"); ++ return IRQ_RETVAL(handled); ++} ++ ++static void gmac_hw_start(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_TXDMA_CURR_DESC_T tx_desc; ++ GMAC_RXDMA_CURR_DESC_T rx_desc; ++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_DMA_STATUS_T dma_status,dma_status_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* program TxDMA Current Descriptor Address register for first descriptor */ ++ tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma); ++ tx_desc.bits.eofie = 1; ++ tx_desc.bits.sof_eof = 0x03; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff); ++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff); /* tx next descriptor address */ ++ ++ /* program RxDMA Current Descriptor Address register for first descriptor */ ++ rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma); ++ rx_desc.bits.eofie = 1; ++ rx_desc.bits.sof_eof = 0x03; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff); ++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff); /* rx next descriptor address */ ++ ++ /* enable GMAC interrupt & disable loopback */ ++ dma_status.bits32 = 0; ++ dma_status.bits.loop_back = 0; /* disable DMA loop-back mode */ ++// dma_status.bits.m_tx_fail = 1; ++ dma_status.bits.m_cnt_full = 1; ++ dma_status.bits.m_rx_pause_on = 1; ++ dma_status.bits.m_tx_pause_on = 1; ++ dma_status.bits.m_rx_pause_off = 1; ++ dma_status.bits.m_tx_pause_off = 1; ++ dma_status.bits.m_rx_overrun = 1; ++ dma_status.bits.m_link_change = 1; ++ dma_status_mask.bits32 = 0; ++ dma_status_mask.bits.loop_back = 1; ++// dma_status_mask.bits.m_tx_fail = 1; ++ dma_status_mask.bits.m_cnt_full = 1; ++ dma_status_mask.bits.m_rx_pause_on = 1; ++ dma_status_mask.bits.m_tx_pause_on = 1; ++ dma_status_mask.bits.m_rx_pause_off = 1; ++ dma_status_mask.bits.m_tx_pause_off = 1; ++ dma_status_mask.bits.m_rx_overrun = 1; ++ dma_status_mask.bits.m_link_change = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32); ++ ++ /* program tx dma control register */ ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; /* start TX DMA transfer */ ++ txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */ ++ txdma_ctrl.bits.td_chain_mode = 1; /* chain mode */ ++ txdma_ctrl.bits.td_prot = 0; ++ txdma_ctrl.bits.td_burst_size = 2; /* DMA burst size for every AHB request */ ++ txdma_ctrl.bits.td_bus = 2; /* peripheral bus width */ ++ txdma_ctrl.bits.td_endian = 0; /* little endian */ ++#ifdef CONFIG_TXINT_DISABLE ++ txdma_ctrl.bits.td_finish_en = 0; /* DMA finish event interrupt disable */ ++#else ++ txdma_ctrl.bits.td_finish_en = 1; /* DMA finish event interrupt enable */ ++#endif ++ txdma_ctrl.bits.td_fail_en = 1; /* DMA fail interrupt enable */ ++ txdma_ctrl.bits.td_perr_en = 1; /* protocol failure interrupt enable */ ++ txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ ++ //txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ ++#ifdef CONFIG_TXINT_DISABLE ++ txdma_ctrl.bits.td_eof_en = 0; /* end of frame interrupt disable */ ++#else ++ txdma_ctrl.bits.td_eof_en = 1; /* end of frame interrupt enable */ ++#endif ++ txdma_ctrl_mask.bits32 = 0; ++ txdma_ctrl_mask.bits.td_start = 1; ++ txdma_ctrl_mask.bits.td_continue = 1; ++ txdma_ctrl_mask.bits.td_chain_mode = 1; ++ txdma_ctrl_mask.bits.td_prot = 15; ++ txdma_ctrl_mask.bits.td_burst_size = 3; ++ txdma_ctrl_mask.bits.td_bus = 3; ++ txdma_ctrl_mask.bits.td_endian = 1; ++ txdma_ctrl_mask.bits.td_finish_en = 1; ++ txdma_ctrl_mask.bits.td_fail_en = 1; ++ txdma_ctrl_mask.bits.td_perr_en = 1; ++ txdma_ctrl_mask.bits.td_eod_en = 1; ++ //txdma_ctrl_mask.bits.td_eod_en = 1; ++ txdma_ctrl_mask.bits.td_eof_en = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); ++ ++ /* program rx dma control register */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl.bits.rd_chain_mode = 1; /* chain mode */ ++ rxdma_ctrl.bits.rd_prot = 0; ++ rxdma_ctrl.bits.rd_burst_size = 2; /* DMA burst size for every AHB request */ ++ rxdma_ctrl.bits.rd_bus = 2; /* peripheral bus width */ ++ rxdma_ctrl.bits.rd_endian = 0; /* little endian */ ++ rxdma_ctrl.bits.rd_finish_en = 1; /* DMA finish event interrupt enable */ ++ rxdma_ctrl.bits.rd_fail_en = 1; /* DMA fail interrupt enable */ ++ rxdma_ctrl.bits.rd_perr_en = 1; /* protocol failure interrupt enable */ ++ rxdma_ctrl.bits.rd_eod_en = 0; /* disable Rx End of Descriptor Interrupt */ ++ rxdma_ctrl.bits.rd_eof_en = 1; /* end of frame interrupt enable */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ rxdma_ctrl_mask.bits.rd_chain_mode = 1; ++ rxdma_ctrl_mask.bits.rd_prot = 15; ++ rxdma_ctrl_mask.bits.rd_burst_size = 3; ++ rxdma_ctrl_mask.bits.rd_bus = 3; ++ rxdma_ctrl_mask.bits.rd_endian = 1; ++ rxdma_ctrl_mask.bits.rd_finish_en = 1; ++ rxdma_ctrl_mask.bits.rd_fail_en = 1; ++ rxdma_ctrl_mask.bits.rd_perr_en = 1; ++ rxdma_ctrl_mask.bits.rd_eod_en = 1; ++ rxdma_ctrl_mask.bits.rd_eof_en = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ return; ++} ++ ++static void gmac_hw_stop(struct net_device *dev) ++{ ++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* program tx dma control register */ ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; ++ txdma_ctrl.bits.td_continue = 0; ++ txdma_ctrl_mask.bits32 = 0; ++ txdma_ctrl_mask.bits.td_start = 1; ++ txdma_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); ++ /* program rx dma control register */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 0; /* stop RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++} ++ ++static int gmac_init_desc_buf(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ dma_addr_t tx_first_desc_dma=0; ++ dma_addr_t rx_first_desc_dma=0; ++ dma_addr_t rx_first_buf_dma=0; ++ unsigned int i,index; ++ ++ printk("Descriptor buffer init......\n"); ++ ++ /* get device index number */ ++ index = gmac_get_dev_index(dev); ++#ifdef CONFIG_SL2312_MPAGE ++ for (i=0; i<TX_DESC_NUM; i++) { ++ tx_skb[index][i].freeable = 0; ++ tx_skb[index][i].skb = 0; ++ tx_skb[index][i].desc_in_use = 0; ++ tx_skb[index][i].end_seq = 0; ++ } ++#else ++ for (i=0;i<TX_DESC_NUM;i++) ++ { ++ tx_skb[index][i] = NULL; ++ } ++#endif ++ for (i=0;i<RX_DESC_NUM;i++) ++ { ++ rx_skb[index][i] = NULL; ++ } ++ ++ /* allocates TX/RX descriptors */ ++ tp->tx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma); ++ tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma; ++ memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); ++ tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma); ++ rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma; ++ memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); ++ tx_desc_start_adr[index] = (unsigned int)tp->tx_desc; /* for tx skb index calculation */ ++ rx_desc_start_adr[index] = (unsigned int)tp->rx_desc; /* for rx skb index calculation */ ++ printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc); ++ printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc); ++ printk("tx_desc_dma = %08x\n",tp->tx_desc_dma); ++ printk("rx_desc_dma = %08x\n",tp->rx_desc_dma); ++ ++ if (tp->tx_desc==0x00 || tp->rx_desc==0x00) ++ { ++ free_irq(dev->irq, dev); ++ ++ if (tp->tx_desc) ++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma); ++ if (tp->rx_desc) ++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma); ++ return -ENOMEM; ++ } ++ ++ /* TX descriptors initial */ ++ tp->tx_cur_desc = tp->tx_desc; /* virtual address */ ++ tp->tx_finished_desc = tp->tx_desc; /* virtual address */ ++ tx_first_desc_dma = tp->tx_desc_dma; /* physical address */ ++ for (i = 1; i < TX_DESC_NUM; i++) ++ { ++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */ ++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; /* set tx buffer size for descriptor */ ++ tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */ ++ tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b; ++ tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */ ++ } ++ /* the last descriptor will point back to first descriptor */ ++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; ++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; ++ tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b; ++ tp->tx_desc = tp->tx_cur_desc; ++ tp->tx_desc_dma = tx_first_desc_dma; ++ ++ /* RX descriptors initial */ ++ tp->rx_cur_desc = tp->rx_desc; /* virtual address */ ++ rx_first_desc_dma = tp->rx_desc_dma; /* physical address */ ++ for (i = 1; i < RX_DESC_NUM; i++) ++ { ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[index][i-1] = skb; ++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; /* set owner bit to DMA */ ++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */ ++ tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE; /* point to next buffer address */ ++ tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */ ++ tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b; ++ tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */ ++ } ++ /* the last descriptor will point back to first descriptor */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[index][i-1] = skb; ++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; ++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; ++ tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b; ++ tp->rx_desc = tp->rx_cur_desc; ++ tp->rx_desc_dma = rx_first_desc_dma; ++ tp->rx_bufs_dma = rx_first_buf_dma; ++ ++ for (i=0; i<GMAC_PHY_IF; i++) { ++ tp->tx_desc_hdr[i] = 0; ++ tp->tx_desc_tail[i] = 0; ++ } ++ return (0); ++} ++ ++static int gmac_clear_counter (struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++// tp = gmac_dev[index]->priv; ++ /* clear counter */ ++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); ++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); ++ tp->stats.tx_bytes = 0; ++ tp->stats.tx_packets = 0; ++ tp->stats.tx_errors = 0; ++ tp->stats.rx_bytes = 0; ++ tp->stats.rx_packets = 0; ++ tp->stats.rx_errors = 0; ++ tp->stats.rx_dropped = 0; ++ return (0); ++} ++ ++static int gmac_open (struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ int retval; ++ ++ gmac_select_interface(dev); ++ ++ /* chip reset */ ++ gmac_sw_reset(dev); ++ ++ /* allocates tx/rx descriptor and buffer memory */ ++ gmac_init_desc_buf(dev); ++ ++ /* get mac address from FLASH */ ++ gmac_get_mac_address(); ++ ++ /* set PHY register to start autonegition process */ ++ gmac_set_phy_status(dev); ++ ++ /* GMAC initialization */ ++ if (gmac_init_chip(dev)) ++ { ++ printk (KERN_ERR "GMAC init fail\n"); ++ } ++ ++ /* start DMA process */ ++ gmac_hw_start(dev); ++ ++ /* enable tx/rx register */ ++ gmac_enable_tx_rx(dev); ++ ++ /* clear statistic counter */ ++ gmac_clear_counter(dev); ++ ++ netif_start_queue (dev); ++ ++ /* hook ISR */ ++ retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev); ++ if (retval) ++ return retval; ++ ++ if(!FLAG_SWITCH) ++ { ++ init_waitqueue_head (&tp->thr_wait); ++ init_completion(&tp->thr_exited); ++ ++ tp->time_to_die = 0; ++ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES); ++ if (tp->thr_pid < 0) ++ { ++ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name); ++ } ++ } ++ return (0); ++} ++ ++static int gmac_close(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int i,dev_index; ++ unsigned int ret; ++ ++ dev_index = gmac_get_dev_index(dev); ++ ++ /* stop tx/rx packet */ ++ gmac_disable_tx_rx(dev); ++ ++ /* stop the chip's Tx and Rx DMA processes */ ++ gmac_hw_stop(dev); ++ ++ netif_stop_queue(dev); ++ ++ /* disable interrupts by clearing the interrupt mask */ ++ synchronize_irq(); ++ free_irq(dev->irq,dev); ++ ++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma); ++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma); ++ ++#ifdef CONFIG_SL2312_MPAGE ++// kfree(tx_skb); ++#endif ++ ++ for (i=0;i<RX_DESC_NUM;i++) ++ { ++ if (rx_skb[dev_index][i]) ++ { ++ dev_kfree_skb(rx_skb[dev_index][i]); ++ } ++ } ++ if(!FLAG_SWITCH) ++ { ++ if (tp->thr_pid >= 0) ++ { ++ tp->time_to_die = 1; ++ wmb(); ++ ret = kill_proc (tp->thr_pid, SIGTERM, 1); ++ if (ret) ++ { ++ printk (KERN_ERR "%s: unable to signal thread\n", dev->name); ++ return ret; ++ } ++// wait_for_completion (&tp->thr_exited); ++ } ++ } ++ ++ return (0); ++} ++ ++#ifdef CONFIG_SL2312_MPAGE ++int printk_all(int dev_index, struct gmac_private* tp) ++{ ++ int i=0; ++ unsigned int tx_current_descriptor = 0; ++ int hw_index; ++ int fi; ++ GMAC_DESCRIPTOR_T* tmp_desc; ++ ++ GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc; ++ fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ printk("tmp_desc %x, id %d\n", (int)cur_desc, fi); ++ ++ tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T); ++ printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc); ++ ++ for (i=0; i<TX_DESC_NUM; i++) { ++ printk("**id %4d, hw_index %4d ==> ", fi, hw_index); ++ printk("fc %8x ", tmp_desc->frame_ctrl.bits32); ++ printk("fs %8x ", tmp_desc->flag_status.bits32); ++ printk("fb %8x ", tmp_desc->buf_adr); ++ printk("fd %8x\n", tmp_desc->next_desc.next_descriptor); ++ tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ } ++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); ++ printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); ++ printk("%s: interrupt status = %x \n",__func__,int_status); ++ return 0; ++} ++ ++int cleanup_desc(int dev_index, struct gmac_private* tp) ++{ ++ int i=0; ++ int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); ++ GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc; ++ ++ for (i=0; i< TX_DESC_NUM; i++) ++ { ++ fill_desc->frame_ctrl.bits_tx_out.own = CPU; ++ fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; ++ tx_skb[dev_index][index].desc_in_use = 0; ++ free_tx_buf(dev_index, index); ++ printk("cleanup di %d\n", index); ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ index++; ++ if (index > TX_DESC_NUM) ++ index = 0; ++ } ++ return 1; ++} ++ ++size_t get_available_tx_desc(struct net_device* dev, int dev_index) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int desc_hdr = tp->tx_desc_hdr[dev_index]; ++ unsigned int desc_tail = tp->tx_desc_tail[dev_index]; ++ int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1); ++ if (!available_desc_num) { ++ if (tx_skb[dev_index][desc_hdr].desc_in_use) ++ return 0; ++ else ++ return TX_DESC_NUM; ++ } ++ return available_desc_num; ++} ++ ++int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc) ++{ ++ int i,index; ++ GMAC_DESCRIPTOR_T* tmp_desc = desc; ++ ++ if (n > TX_DESC_NUM) ++ return 0; ++ ++ index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); ++ for (i=0; i<n; i++) ++ { ++ if (tx_skb[dev_index][index].desc_in_use) ++ { ++ printk("sw desc %d is in use\n", index); ++ /* cleanup all the descriptors to check if DMA still running */ ++ return 0; ++ } ++ index++; ++ if (index == TX_DESC_NUM) ++ index = 0; ++ } ++ return 1; ++} ++ ++#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F) ++ ++inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb) ++{ ++ int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ if (desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++ tx_skb[dev_index][index].freeable = freeable; ++ if ((sof & 0x01) && skb) { ++ tx_skb[dev_index][index].skb = skb; ++ } ++ else ++ tx_skb[dev_index][index].skb = 0; ++ ++ if (sof != 2) ++ tx_skb[dev_index][index].desc_in_use = 1; ++ else ++ tx_skb[dev_index][index].desc_in_use = 0; ++ ++ consistent_sync(data, len, PCI_DMA_TODEVICE); ++ desc->buf_adr = (unsigned int)__pa(data); ++ desc->frame_ctrl.bits_tx_out.buffer_size = len; ++ desc->flag_status.bits_tx_flag.frame_count = total_len; ++ desc->next_desc.bits.eofie = 1; ++ desc->next_desc.bits.sof_eof = sof; ++ desc->frame_ctrl.bits_tx_out.vlan_enable = 0; ++ desc->frame_ctrl.bits_tx_out.ip_csum_en = 1; /* TSS IPv4 IP header checksum enable */ ++ desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1; /* TSS IPv6 tx enable */ ++ desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1; /* TSS TCP checksum enable */ ++ desc->frame_ctrl.bits_tx_out.udp_csum_en = 1; /* TSS UDP checksum enable */ ++ wmb(); ++ desc->frame_ctrl.bits_tx_out.own = ownership; ++// consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ } ++ return 0; ++} ++#endif ++ ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; ++ GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++ unsigned int len = skb->len; ++ unsigned int dev_index; ++ static unsigned int pcount = 0; ++#ifdef CONFIG_SL2312_MPAGE ++ GMAC_DESCRIPTOR_T *fill_desc; ++ int snd_pages = skb_shinfo(skb)->nr_frags; /* get number of descriptor */ ++ int desc_needed = 1; // for jumbo packet, one descriptor is enough. ++ int header_len = skb->len; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ int tcp_hdr_len; ++ int data_len; ++ int prv_index; ++ long seq_num; ++ int first_desc_index; ++ int ownership, freeable; ++ int eof; ++ int i=0; ++#endif ++#ifdef CONFIG_TXINT_DISABLE ++ int available_desc_cnt = 0; ++#endif ++ ++ dev_index = gmac_select_interface(dev); ++ ++#ifdef CONFIG_TXINT_DISABLE ++ available_desc_cnt = get_available_tx_desc(dev, dev_index); ++ ++ if (available_desc_cnt < (TX_DESC_NUM >> 2)) { ++ gmac_tx_packet_complete(dev); ++ } ++#endif ++ ++#ifdef CONFIG_SL2312_MPAGE ++ ++ fill_desc = tp->tx_cur_desc; ++ if(!fill_desc) { ++ printk("cur_desc is NULL!\n"); ++ return -1; ++ } ++ ++ if (storlink_ctl.recvfile==2) ++ { ++ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len); ++ } ++ ++ if (snd_pages) ++ desc_needed += snd_pages; /* decriptors needed for this large packet */ ++ ++ if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) { ++ printk("no available desc!\n"); ++ gmac_dump_register(dev); ++ printk_all(dev_index, tp); ++ tp->stats.tx_dropped++; ++ if (pcount++ > 10) ++ { ++ for (;;); ++ } ++ return -1; ++ } ++ ++ first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ /* check if the tcp packet is in order*/ ++ ip_hdr = (struct iphdr*) &(skb->data[14]); ++ tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]); ++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4; ++ data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len; ++ ++ prv_index = first_desc_index-1; ++ if (prv_index <0) ++ prv_index += TX_DESC_NUM; ++ seq_num = ntohl(tcp_hdr->seq); ++ ++ if (snd_pages) ++ { ++ // calculate header length ++ // check fragment total length and header len = skb len - frag len ++ // or parse the header. ++ for (i=0; i<snd_pages; i++) { ++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i]; ++ header_len -= frag->size; ++ } ++ ownership = CPU; ++ freeable = 0; ++ /* fill header into first descriptor */ ++ fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0); ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; ++ ++ eof = 0; ++ ownership = DMA; ++ for (i=0; i<snd_pages; i++) ++ { ++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i]; ++ int start_pos = frag->page_offset; ++ char* data_buf = page_address(frag->page); ++ int data_size = frag->size; ++ int cur_index; ++ ++ if (i == snd_pages-1) ++ { ++ eof=1; ++ freeable = 1; ++ } ++ fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size, ++ len, eof, freeable, ownership, skb); ++ cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ } ++ /* pass the ownership of the first descriptor to hardware */ ++// disable_irq(gmac_irq[dev_index]); ++ tx_skb[dev_index][first_desc_index].desc_in_use = 1; ++ wmb(); ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; ++// consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ tp->tx_cur_desc = fill_desc; ++ dev->trans_start = jiffies; ++// enable_irq(gmac_irq[dev_index]); ++ } ++ else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU ) ++ { ++// tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; ++// disable_irq(gmac_irq[dev_index]); ++ fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb); ++// enable_irq(gmac_irq[dev_index]); ++ //consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ dev->trans_start = jiffies; ++ } ++ else ++ { ++ printk("gmac tx drop!\n"); ++ tp->stats.tx_dropped++; ++ return -1; ++ } ++ ++#ifdef CONFIG_TXINT_DISABLE ++ tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1); ++#endif ++ ++#else ++ if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE)) ++ { ++ index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ tx_skb[dev_index][index] = skb; ++ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE); ++ tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data); ++ tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len; /* total frame byte count */ ++ tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len; /* descriptor byte count */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0; ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0; /* TSS IPv4 IP header checksum enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ; /* TSS IPv6 tx enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0; /* TSS TCP checksum enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0; /* TSS UDP checksum enable */ ++ wmb(); ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; /* set owner bit */ ++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ dev->trans_start = jiffies; ++ } ++ else ++ { ++ /* no free tx descriptor */ ++ dev_kfree_skb(skb); ++ netif_stop_queue(dev); ++ tp->stats.tx_dropped++; ++ return (-1); ++ } ++#endif ++ /* if TX DMA process is stoped , restart it */ ++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); ++ if (txdma_busy.bits.td_busy == 0) ++ { ++ /* restart DMA process */ ++ tx_ctrl.bits32 = 0; ++ tx_ctrl.bits.td_start = 1; ++ tx_ctrl.bits.td_continue = 1; ++ tx_ctrl_mask.bits32 = 0; ++ tx_ctrl_mask.bits.td_start = 1; ++ tx_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); ++ } ++ return (0); ++} ++ ++ ++struct net_device_stats * gmac_get_stats(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned long flags; ++ unsigned int pkt_drop; ++ unsigned int pkt_error; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++// if (storlink_ctl.recvfile==3) ++// { ++// printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30)); ++// gmac_dump_register(dev); ++// printk_all(0, dev); ++// } ++ ++ if (netif_running(dev)) ++ { ++ /* read H/W counter */ ++ spin_lock_irqsave(&tp->lock,flags); ++ pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); ++ pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); ++ tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop; ++ tp->stats.rx_errors = tp->stats.rx_errors + pkt_error; ++ spin_unlock_irqrestore(&tp->lock,flags); ++ } ++ return &tp->stats; ++} ++ ++static unsigned const ethernet_polynomial = 0x04c11db7U; ++static inline u32 ether_crc (int length, unsigned char *data) ++{ ++ int crc = -1; ++ unsigned int i; ++ unsigned int crc_val=0; ++ ++ while (--length >= 0) { ++ unsigned char current_octet = *data++; ++ int bit; ++ for (bit = 0; bit < 8; bit++, current_octet >>= 1) ++ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ++ ethernet_polynomial : 0); ++ } ++ crc = ~crc; ++ for (i=0;i<32;i++) ++ { ++ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i)); ++ } ++ return crc_val; ++} ++ ++static void gmac_set_rx_mode(struct net_device *dev) ++{ ++ GMAC_RX_FLTR_T filter; ++ unsigned int mc_filter[2]; /* Multicast hash filter */ ++ int bit_nr; ++ unsigned int i, dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++// printk("%s : dev->flags = %x \n",__func__,dev->flags); ++// dev->flags |= IFF_ALLMULTI; /* temp */ ++ filter.bits32 = 0; ++ filter.bits.error = 0; ++ if (dev->flags & IFF_PROMISC) ++ { ++ filter.bits.error = 1; ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else if (dev->flags & IFF_ALLMULTI) ++ { ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else ++ { ++ struct dev_mc_list *mclist; ++ ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0; ++ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next) ++ { ++ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f; ++ if (bit_nr < 32) ++ { ++ mc_filter[0] = mc_filter[0] | (1<<bit_nr); ++ } ++ else ++ { ++ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32)); ++ } ++ } ++ } ++ filter.bits32 = 0x1f; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RX_FLTR,filter.bits32,0xffffffff); ++ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL0,mc_filter[0],0xffffffff); ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL1,mc_filter[1],0xffffffff); ++ return; ++} ++ ++static int gmac_set_mac_address(struct net_device *dev, void *addr) ++{ ++ struct sockaddr *sock; ++ unsigned int reg_val; ++ unsigned int dev_index; ++ unsigned int i; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ sock = (struct sockaddr *) addr; ++ for (i = 0; i < 6; i++) ++ { ++ dev->dev_addr[i] = sock->sa_data[i]; ++ } ++ ++ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24); ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff); ++ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff); ++ memcpy(ð0_mac[0],&dev->dev_addr[0],6); ++ printk("Storlink %s address = ",dev->name); ++ printk("%02x",dev->dev_addr[0]); ++ printk("%02x",dev->dev_addr[1]); ++ printk("%02x",dev->dev_addr[2]); ++ printk("%02x",dev->dev_addr[3]); ++ printk("%02x",dev->dev_addr[4]); ++ printk("%02x\n",dev->dev_addr[5]); ++ ++ return (0); ++} ++ ++static void gmac_tx_timeout(struct net_device *dev) ++{ ++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; ++ GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* if TX DMA process is stoped , restart it */ ++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); ++ if (txdma_busy.bits.td_busy == 0) ++ { ++ /* restart DMA process */ ++ tx_ctrl.bits32 = 0; ++ tx_ctrl.bits.td_start = 1; ++ tx_ctrl.bits.td_continue = 1; ++ tx_ctrl_mask.bits32 = 0; ++ tx_ctrl_mask.bits.td_start = 1; ++ tx_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); ++ } ++ netif_wake_queue(dev); ++ return; ++} ++ ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ int rc = 0; ++ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data; ++ ++ if (!netif_running(dev)) ++ { ++ printk("Before changing the H/W address,please down the device.\n"); ++ return -EINVAL; ++ } ++ ++ switch (cmd) { ++ case SIOCETHTOOL: ++ break; ++ ++ case SIOCSIFHWADDR: ++ gmac_set_mac_address(dev,hwa); ++ break; ++ ++ case SIOCGMIIPHY: /* Get the address of the PHY in use. */ ++ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */ ++ break; ++ ++ case SIOCGMIIREG: /* Read the specified MII register. */ ++ case SIOCDEVPRIVATE+1: ++ break; ++ ++ case SIOCSMIIREG: /* Write the specified MII register */ ++ case SIOCDEVPRIVATE+2: ++ break; ++ ++ default: ++ rc = -EOPNOTSUPP; ++ break; ++ } ++ ++ return rc; ++} ++ ++static void gmac_cleanup_module(void) ++{ ++ int i; ++ ++ for (i=0;i<GMAC_PHY_IF;i++) ++ { ++ unregister_netdev(gmac_dev[i]); ++ } ++ return ; ++} ++ ++static int __init gmac_init_module(void) ++{ ++ struct gmac_private *tp; ++ struct net_device *dev[GMAC_PHY_IF]; ++ unsigned int i; ++ ++#ifdef MODULE ++ printk (KERN_INFO RTL8139_DRIVER_NAME "\n"); ++#endif ++// init_waitqueue_entry(&wait, current); ++ ++ printk("GMAC Init......\n"); ++ for(i = 0; i<GMAC_PHY_IF; i++) ++ { ++ dev[i] = alloc_etherdev(sizeof(struct gmac_private)); ++ if (dev[i] == NULL) ++ { ++ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i); ++ return -ENOMEM; ++ } ++ gmac_dev[i] = dev[i]; ++ ++ SET_MODULE_OWNER(dev[i]); ++ ++ tp = dev[i]->priv; ++ ++ dev[i]->base_addr = gmac_base_addr[i]; ++ dev[i]->irq = gmac_irq[i]; ++ dev[i]->open = gmac_open; ++ dev[i]->stop = gmac_close; ++ dev[i]->hard_start_xmit = gmac_start_xmit; ++ dev[i]->get_stats = gmac_get_stats; ++ dev[i]->set_multicast_list = gmac_set_rx_mode; ++ dev[i]->set_mac_address = gmac_set_mac_address; ++ dev[i]->do_ioctl = gmac_netdev_ioctl; ++ dev[i]->tx_timeout = gmac_tx_timeout; ++ dev[i]->watchdog_timeo = TX_TIMEOUT; ++ dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO; ++#ifdef CONFIG_SL_NAPI ++ printk("NAPI driver is enabled.\n"); ++ if (i==0) ++ { ++ dev[i]->poll = gmac_rx_poll_ga; ++ dev[i]->weight = 64; ++ } ++ else ++ { ++ dev[i]->poll = gmac_rx_poll_gb; ++ dev[i]->weight = 64; ++ } ++#endif ++ ++ if (register_netdev(dev[i])) ++ { ++ gmac_cleanup_module(); ++ return(-1); ++ } ++ } ++ ++#ifdef CONFIG_SL3516_ASIC ++{ ++ unsigned int val; ++ ++ /* set GMAC global register */ ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10); ++ val = val | 0x005a0000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10); ++ writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c); ++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20); ++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24); ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04); ++ if((val&(1<<20))==0){ // GMAC1 enable ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30); ++ val = (val & 0xe7ffffff) | 0x08000000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30); ++ } ++ ++} ++#endif ++ ++// printk("%s: dev0=%x dev1=%x \n",__func__,dev[0],dev[1]); ++// FLAG_SWITCH = 0 ; ++// FLAG_SWITCH = SPI_get_identifier(); ++// if(FLAG_SWITCH) ++// { ++// printk("Configure ADM699X...\n"); ++// SPI_default(); //Add by jason for ADM699X configuration ++// } ++ return (0); ++} ++ ++ ++module_init(gmac_init_module); ++module_exit(gmac_cleanup_module); ++ ++static int gmac_phy_thread (void *data) ++{ ++ struct net_device *dev = data; ++ struct gmac_private *tp = dev->priv; ++ unsigned long timeout; ++ ++ daemonize("%s", dev->name); ++ allow_signal(SIGTERM); ++// reparent_to_init(); ++// spin_lock_irq(¤t->sigmask_lock); ++// sigemptyset(¤t->blocked); ++// recalc_sigpending(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++// strncpy (current->comm, dev->name, sizeof(current->comm) - 1); ++// current->comm[sizeof(current->comm) - 1] = '\0'; ++ ++ while (1) ++ { ++ timeout = next_tick; ++ do ++ { ++ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); ++ } while (!signal_pending (current) && (timeout > 0)); ++ ++ if (signal_pending (current)) ++ { ++// spin_lock_irq(¤t->sigmask_lock); ++ flush_signals(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++ } ++ ++ if (tp->time_to_die) ++ break; ++ ++// printk("%s : Polling PHY Status...%x\n",__func__,dev); ++ rtnl_lock (); ++ gmac_get_phy_status(dev); ++ rtnl_unlock (); ++ } ++ complete_and_exit (&tp->thr_exited, 0); ++} ++ ++static void gmac_set_phy_status(struct net_device *dev) ++{ ++ GMAC_STATUS_T status; ++ unsigned int reg_val; ++ unsigned int i = 0; ++ unsigned int index; ++ ++ if (FLAG_SWITCH==1) ++ { ++ return; /* GMAC connects to a switch chip, not PHY */ ++ } ++ ++ index = gmac_get_dev_index(dev); ++ ++ if (index == 0) ++ { ++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ ++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ ++#ifdef CONFIG_SL3516_ASIC ++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */ ++#endif ++ } ++ else ++ { ++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ ++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ ++#ifdef CONFIG_SL3516_ASIC ++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */ ++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ ++#endif ++ } ++ ++ mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */ ++ mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */ ++ while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04) ++ { ++ i++; ++ if (i > 30) ++ { ++ break; ++ } ++ msleep(100); ++ } ++ if (i>30) ++ { ++ pre_phy_status[index] = LINK_DOWN; ++ clear_bit(__LINK_STATE_START, &dev->state); ++ netif_stop_queue(dev); ++ storlink_ctl.link = 0; ++ printk("Link Down (%04x) ",reg_val); ++ } ++ else ++ { ++ pre_phy_status[index] = LINK_UP; ++ set_bit(__LINK_STATE_START, &dev->state); ++ netif_wake_queue(dev); ++ storlink_ctl.link = 1; ++ printk("Link Up (%04x) ",reg_val); ++ } ++ ++ status.bits32 = 0; ++ reg_val = mii_read(phy_addr[index],10); ++ printk("reg_val0 = %x \n",reg_val); ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ printk(" 1000M/Full \n"); ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ printk(" 1000M/Half \n"); ++ } ++ else ++ { ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ printk("reg_val1 = %x \n",reg_val); ++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ printk(" 100M/Full \n"); ++ } ++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ printk(" 100M/Half \n"); ++ } ++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ printk(" 10M/Full \n"); ++ } ++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ printk(" 100M/Half \n"); ++ } ++ } ++ ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x20)==0x20) ++ { ++ flow_control_enable[index] = 1; ++ printk("Flow Control Enable. \n"); ++ } ++ else ++ { ++ flow_control_enable[index] = 0; ++ printk("Flow Control Disable. \n"); ++ } ++ full_duplex = status.bits.duplex; ++ speed = status.bits.speed; ++} ++ ++static void gmac_get_phy_status(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ GMAC_STATUS_T status; ++ unsigned int reg_val; ++ unsigned int index; ++ ++ index = gmac_select_interface(dev); ++ ++ status.bits32 = 0; ++ status.bits.phy_mode = 1; ++ ++#ifdef CONFIG_SL3516_ASIC ++ status.bits.mii_rmii = 2; /* default value for ASIC version */ ++// status.bits.speed = 1; ++#else ++ if (index==0) ++ status.bits.mii_rmii = 0; ++ else ++ status.bits.mii_rmii = 2; ++#endif ++ ++ /* read PHY status register */ ++ reg_val = mii_read(phy_addr[index],0x01); ++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */ ++ { ++ /* read PHY Auto-Negotiation Link Partner Ability Register */ ++ reg_val = mii_read(phy_addr[index],10); ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ } ++ else ++ { ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ } ++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ } ++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ } ++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ } ++ } ++ status.bits.link = LINK_UP; /* link up */ ++ netif_wake_queue(dev); ++ ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x20)==0x20) ++ { ++ if (flow_control_enable[index] == 0) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++// printk("eth%d Flow Control Enable. \n",index); ++ } ++ flow_control_enable[index] = 1; ++ } ++ else ++ { ++ if (flow_control_enable[index] == 1) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++// printk("eth%d Flow Control Disable. \n",index); ++ } ++ flow_control_enable[index] = 0; ++ } ++ ++ if (pre_phy_status[index] == LINK_DOWN) ++ { ++ gmac_enable_tx_rx(dev); ++ pre_phy_status[index] = LINK_UP; ++ set_bit(__LINK_STATE_START, &dev->state); ++ storlink_ctl.link = 1; ++// printk("eth%d Link Up ...\n",index); ++ } ++ } ++ else ++ { ++ status.bits.link = LINK_DOWN; /* link down */ ++ netif_stop_queue(dev); ++ flow_control_enable[index] = 0; ++ storlink_ctl.link = 0; ++ if (pre_phy_status[index] == LINK_UP) ++ { ++ gmac_disable_tx_rx(dev); ++ pre_phy_status[index] = LINK_DOWN; ++ clear_bit(__LINK_STATE_START, &dev->state); ++// printk("eth%d Link Down ...\n",index); ++ } ++ ++ } ++ ++ reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS); ++ if (reg_val != status.bits32) ++ { ++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f); ++ } ++} ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++ ++/* define GPIO pin for MDC/MDIO */ ++ ++// for gemini ASIC ++#ifdef CONFIG_SL3516_ASIC ++#define H_MDC_PIN 22 ++#define H_MDIO_PIN 21 ++#define G_MDC_PIN 22 ++#define G_MDIO_PIN 21 ++#else ++#define H_MDC_PIN 3 ++#define H_MDIO_PIN 2 ++#define G_MDC_PIN 0 ++#define G_MDIO_PIN 1 ++#endif ++ ++//#define GPIO_MDC 0x80000000 ++//#define GPIO_MDIO 0x00400000 ++ ++static unsigned int GPIO_MDC = 0; ++static unsigned int GPIO_MDIO = 0; ++static unsigned int GPIO_MDC_PIN = 0; ++static unsigned int GPIO_MDIO_PIN = 0; ++ ++// For PHY test definition!! ++#define LPC_EECK 0x02 ++#define LPC_EDIO 0x04 ++#define LPC_GPIO_SET 3 ++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE) ++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++}; ++/***********************/ ++/* MDC : GPIO[31] */ ++/* MDIO: GPIO[22] */ ++/***********************/ ++ ++/*************************************************** ++* All the commands should have the frame structure: ++*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE> ++****************************************************/ ++ ++/***************************************************************** ++* Inject a bit to NWay register through CSR9_MDC,MDIO ++*******************************************************************/ ++void mii_serial_write(char bit_MDO) // write data into mii PHY ++{ ++#if 0 //def CONFIG_SL2312_LPC_IT8712 ++ unsigned char iomode,status; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ if(bit_MDO) ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= LPC_EDIO ; //EDIO high ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ else ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status &= ~(LPC_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ ++ status |= LPC_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(LPC_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++#else ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR; ++ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */ ++ writel(value,addr); ++ if(bit_MDO) ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDIO,addr); /* set MDIO to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDIO,addr); /* set MDIO to 0 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ } ++ ++#endif ++} ++ ++/********************************************************************** ++* read a bit from NWay register through CSR9_MDC,MDIO ++***********************************************************************/ ++unsigned int mii_serial_read(void) // read data from mii PHY ++{ ++#if 0 //def CONFIG_SL2312_LPC_IT8712 ++ unsigned char iomode,status; ++ unsigned int value ; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode &= ~(LPC_EDIO) ; // Set EDIO input ++ iomode |= (LPC_EECK) ; // Set EECK,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= LPC_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(LPC_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ value = inb_gpio( LPC_GPIO_SET); ++ ++ value = value>>2 ; ++ value &= 0x01; ++ ++ return value ; ++ ++#else ++ unsigned int *addr; ++ unsigned int value; ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR); ++ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */ ++ writel(value,addr); ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN); ++ value = readl(addr); ++ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN; ++ return(value); ++ ++#endif ++} ++ ++/*************************************** ++* preamble + ST ++***************************************/ ++void mii_pre_st(void) ++{ ++ unsigned char i; ++ ++ for(i=0;i<32;i++) // PREAMBLE ++ mii_serial_write(1); ++ mii_serial_write(0); // ST ++ mii_serial_write(1); ++} ++ ++ ++/****************************************** ++* Read MII register ++* phyad -> physical address ++* regad -> register address ++***************************************** */ ++unsigned int mii_read(unsigned char phyad,unsigned char regad) ++{ ++ unsigned int i,value; ++ unsigned int bit; ++ ++ if (phyad == GPHY_ADDR) ++ { ++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */ ++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */ ++ } ++ else ++ { ++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */ ++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */ ++ } ++ GPIO_MDC = (1<<GPIO_MDC_PIN); ++ GPIO_MDIO = (1<<GPIO_MDIO_PIN); ++ ++ mii_pre_st(); // PRE+ST ++ mii_serial_write(1); // OP ++ mii_serial_write(0); ++ ++ for (i=0;i<5;i++) { // PHYAD ++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ for (i=0;i<5;i++) { // REGAD ++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ mii_serial_read(); // TA_Z ++// if((bit=mii_serial_read()) !=0 ) // TA_0 ++// { ++// return(0); ++// } ++ value=0; ++ for (i=0;i<16;i++) { // READ DATA ++ bit=mii_serial_read(); ++ value += (bit<<(15-i)) ; ++ } ++ ++ mii_serial_write(0); // dumy clock ++ mii_serial_write(0); // dumy clock ++//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value); ++ return(value); ++} ++ ++/****************************************** ++* Write MII register ++* phyad -> physical address ++* regad -> register address ++* value -> value to be write ++***************************************** */ ++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value) ++{ ++ unsigned int i; ++ char bit; ++ ++printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value); ++ if (phyad == GPHY_ADDR) ++ { ++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */ ++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */ ++ } ++ else ++ { ++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */ ++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */ ++ } ++ GPIO_MDC = (1<<GPIO_MDC_PIN); ++ GPIO_MDIO = (1<<GPIO_MDIO_PIN); ++ ++ mii_pre_st(); // PRE+ST ++ mii_serial_write(0); // OP ++ mii_serial_write(1); ++ for (i=0;i<5;i++) { // PHYAD ++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ for (i=0;i<5;i++) { // REGAD ++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ mii_serial_write(1); // TA_1 ++ mii_serial_write(0); // TA_0 ++ ++ for (i=0;i<16;i++) { // OUT DATA ++ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ; ++ mii_serial_write(bit); ++ } ++ mii_serial_write(0); // dumy clock ++ mii_serial_write(0); // dumy clock ++} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++/* NOTES ++ * The instruction set of the 93C66/56/46/26/06 chips are as follows: ++ * ++ * Start OP * ++ * Function Bit Code Address** Data Description ++ * ------------------------------------------------------------------- ++ * READ 1 10 A7 - A0 Reads data stored in memory, ++ * starting at specified address ++ * EWEN 1 00 11XXXXXX Write enable must precede ++ * all programming modes ++ * ERASE 1 11 A7 - A0 Erase register A7A6A5A4A3A2A1A0 ++ * WRITE 1 01 A7 - A0 D15 - D0 Writes register ++ * ERAL 1 00 10XXXXXX Erase all registers ++ * WRAL 1 00 01XXXXXX D15 - D0 Writes to all registers ++ * EWDS 1 00 00XXXXXX Disables all programming ++ * instructions ++ * *Note: A value of X for address is a don't care condition. ++ * **Note: There are 8 address bits for the 93C56/66 chips unlike ++ * the 93C46/26/06 chips which have 6 address bits. ++ * ++ * The 93Cx6 has a four wire interface: clock, chip select, data in, and ++ * data out.While the ADM6996 uning three interface: clock, chip select,and data line. ++ * The input and output are the same pin. ADM6996 can only recognize the write cmd. ++ * In order to perform above functions, you need ++ * 1. to enable the chip select . ++ * 2. send one clock of dummy clock ++ * 3. send start bit and opcode ++ * 4. send 8 bits address and 16 bits data ++ * 5. to disable the chip select. ++ * Jason Lee 2003/07/30 ++ */ ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define GPIO_EECS 0x00400000 /* EECS: GPIO[22] */ ++//#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/ ++#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/ ++#define GPIO_EECK 0x80000000 /* EECK: GPIO[31] */ ++ ++#define ADM_EECS 0x01 ++#define ADM_EECK 0x02 ++#define ADM_EDIO 0x04 ++/************************************************************* ++* SPI protocol for ADM6996 control ++**************************************************************/ ++#define SPI_OP_LEN 0x03 // the length of start bit and opcode ++#define SPI_OPWRITE 0X05 // write ++#define SPI_OPREAD 0X06 // read ++#define SPI_OPERASE 0X07 // erase ++#define SPI_OPWTEN 0X04 // write enable ++#define SPI_OPWTDIS 0X04 // write disable ++#define SPI_OPERSALL 0X04 // erase all ++#define SPI_OPWTALL 0X04 // write all ++ ++#define SPI_ADD_LEN 8 // bits of Address ++#define SPI_DAT_LEN 16 // bits of Data ++#define ADM6996_PORT_NO 6 // the port number of ADM6996 ++#define ADM6999_PORT_NO 9 // the port number of ADM6999 ++#ifdef CONFIG_ADM_6996 ++ #define ADM699X_PORT_NO ADM6996_PORT_NO ++#endif ++#ifdef CONFIG_ADM_6999 ++ #define ADM699X_PORT_NO ADM6999_PORT_NO ++#endif ++#define LPC_GPIO_SET 3 ++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE) ++ ++extern int it8712_exist; ++ ++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++ ++/****************************************/ ++/* Function Declare */ ++/****************************************/ ++/* ++void SPI_write(unsigned char addr,unsigned int value); ++unsigned int SPI_read(unsigned char table,unsigned char addr); ++void SPI_write_bit(char bit_EEDO); ++unsigned int SPI_read_bit(void); ++void SPI_default(void); ++void SPI_reset(unsigned char rstype,unsigned char port_cnt); ++void SPI_pre_st(void); ++void SPI_CS_enable(unsigned char enable); ++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask); ++void SPI_Set_tag(unsigned int port,unsigned tag); ++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask); ++void SPI_mac_lock(unsigned int port, unsigned char lock); ++void SPI_get_port_state(unsigned int port); ++void SPI_port_enable(unsigned int port,unsigned char enable); ++ ++void SPI_get_status(unsigned int port); ++*/ ++ ++struct PORT_CONFIG ++{ ++ unsigned char auto_negotiation; // 0:Disable 1:Enable ++ unsigned char speed; // 0:10M 1:100M ++ unsigned char duplex; // 0:Half 1:Full duplex ++ unsigned char Tag; // 0:Untag 1:Tag ++ unsigned char port_disable; // 0:port enable 1:disable ++ unsigned char pvid; // port VLAN ID 0001 ++ unsigned char mdix; // Crossover judgement. 0:Disable 1:Enable ++ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable ++}; ++ ++struct PORT_STATUS ++{ ++ unsigned char link; // 0:not link 1:link established ++ unsigned char speed; // 0:10M 1:100M ++ unsigned char duplex; // 0:Half 1:Full duplex ++ unsigned char flow_ctl; // 0:flow control disable 1:enable ++ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable ++ unsigned char port_disable; // 0:port enable 1:disable ++ ++ // Serial Management ++ unsigned long rx_pac_count; //receive packet count ++ unsigned long rx_pac_byte; //receive packet byte count ++ unsigned long tx_pac_count; //transmit packet count ++ unsigned long tx_pac_byte; //transmit packet byte count ++ unsigned long collision_count; //error count ++ unsigned long error_count ; ++ ++ unsigned long rx_pac_count_overflow; //overflow flag ++ unsigned long rx_pac_byte_overflow; ++ unsigned long tx_pac_count_overflow; ++ unsigned long tx_pac_byte_overflow; ++ unsigned long collision_count_overflow; ++ unsigned long error_count_overflow; ++}; ++ ++struct PORT_CONFIG port_config[ADM699X_PORT_NO]; // 0~3:LAN , 4:WAN , 5:MII ++static struct PORT_STATUS port_state[ADM699X_PORT_NO]; ++ ++/****************************************** ++* SPI_write ++* addr -> Write Address ++* value -> value to be write ++***************************************** */ ++void SPI_write(unsigned char addr,unsigned int value) ++{ ++ int i; ++ char bit; ++#ifdef CONFIG_IT8712_GPIO ++ char status; ++#else ++ int ad1; ++#endif ++ ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++ SPI_CS_enable(1); ++ ++ SPI_write_bit(0); //dummy clock ++ ++ //send write command (0x05) ++ for(i=SPI_OP_LEN-1;i>=0;i--) ++ { ++ bit = (SPI_OPWRITE>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ // send 8 bits address (MSB first, LSB last) ++ for(i=SPI_ADD_LEN-1;i>=0;i--) ++ { ++ bit = (addr>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ // send 16 bits data (MSB first, LSB last) ++ for(i=SPI_DAT_LEN-1;i>=0;i--) ++ { ++ bit = (value>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ ++ SPI_CS_enable(0); // CS low ++ ++ for(i=0;i<0xFFF;i++) ; ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++} ++ ++ ++/************************************ ++* SPI_write_bit ++* bit_EEDO -> 1 or 0 to be written ++************************************/ ++void SPI_write_bit(char bit_EEDO) ++{ ++#ifdef CONFIG_IT8712_GPIO ++ unsigned char iomode,status; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ if(bit_EEDO) ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= ADM_EDIO ; //EDIO high ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ else ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ ++ status |= ADM_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(ADM_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++#else ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR); ++ value = readl(addr) |GPIO_EECK |GPIO_MISO ; /* set EECK/MISO Pin to output */ ++ writel(value,addr); ++ if(bit_EEDO) ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MISO,addr); /* set MISO to 1 */ ++ writel(GPIO_EECK,addr); /* set EECK to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); /* set EECK to 0 */ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,addr); /* set MISO to 0 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); /* set EECK to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); /* set EECK to 0 */ ++ } ++ ++ return ; ++#endif ++} ++ ++/********************************************************************** ++* read a bit from ADM6996 register ++***********************************************************************/ ++unsigned int SPI_read_bit(void) // read data from ++{ ++#ifdef CONFIG_IT8712_GPIO ++ unsigned char iomode,status; ++ unsigned int value ; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode &= ~(ADM_EDIO) ; // Set EDIO input ++ iomode |= (ADM_EECS|ADM_EECK) ; // Set EECK,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= ADM_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(ADM_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ value = inb_gpio( LPC_GPIO_SET); ++ ++ value = value>>2 ; ++ value &= 0x01; ++ ++ return value ; ++#else ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR); ++ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input ++ writel(value,addr); ++ ++ addr =(GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); // set EECK to 1 ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); // set EECK to 0 ++ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_IN); ++ value = readl(addr) ; ++ value = value >> 30; ++ return value ; ++#endif ++} ++ ++/****************************************** ++* SPI_default ++* EEPROM content default value ++*******************************************/ ++void SPI_default(void) ++{ ++ int i; ++#ifdef CONFIG_ADM_6999 ++ SPI_write(0x11,0xFF30); ++ for(i=1;i<8;i++) ++ SPI_write(i,0x840F); ++ ++ SPI_write(0x08,0x880F); //port 8 Untag, PVID=2 ++ SPI_write(0x09,0x881D); //port 9 Tag, PVID=2 ,10M ++ SPI_write(0x14,0x017F); //Group 0~6,8 as VLAN 1 ++ SPI_write(0x15,0x0180); //Group 7,8 as VLAN 2 ++#endif ++ ++#ifdef CONFIG_ADM_6996 ++ SPI_write(0x11,0xFF30); ++ SPI_write(0x01,0x840F); //port 0~3 Untag ,PVID=1 ,100M ,duplex ++ SPI_write(0x03,0x840F); ++ SPI_write(0x05,0x840F); ++ SPI_write(0x07,0x840F); ++ SPI_write(0x08,0x880F); //port 4 Untag, PVID=2 ++ SPI_write(0x09,0x881D); //port 5 Tag, PVID=2 ,10M ++ SPI_write(0x14,0x0155); //Group 0~3,5 as VLAN 1 ++ SPI_write(0x15,0x0180); //Group 4,5 as VLAN 2 ++ ++#endif ++ ++ for(i=0x16;i<=0x22;i++) ++ SPI_write((unsigned char)i,0x0000); // clean VLAN¡@map 3~15 ++ ++ for (i=0;i<NUM_VLAN_IF;i++) // Set VLAN ID map 1,2 ++ SPI_Set_PVID( VLAN_conf[i].vid, VLAN_conf[i].portmap); ++ ++ for(i=0;i<ADM699X_PORT_NO;i++) // reset count ++ SPI_reset(0,i); ++} ++ ++/************************************************* ++* SPI_reset ++* rstype -> reset type ++* 0:reset all count for 'port_cnt' port ++* 1:reset specified count 'port_cnt' ++* port_cnt -> port number or counter index ++***************************************************/ ++void SPI_reset(unsigned char rstype,unsigned char port_cnt) ++{ ++ ++ int i; ++#ifdef CONFIG_IT8712_GPIO ++ char status; ++#else ++ int ad1; ++#endif ++ char bit; ++ ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++ ++ SPI_CS_enable(0); // CS low ++ ++ SPI_pre_st(); // PRE+ST ++ SPI_write_bit(0); // OP ++ SPI_write_bit(1); ++ ++ SPI_write_bit(1); // Table select, must be 1 -> reset Counter ++ ++ SPI_write_bit(0); // Device Address ++ SPI_write_bit(0); ++ ++ rstype &= 0x01; ++ SPI_write_bit(rstype); // Reset type 0:clear dedicate port's all counters 1:clear dedicate counter ++ ++ for (i=5;i>=0;i--) // port or cnt index ++ { ++ bit = port_cnt >> i ; ++ bit &= 0x01 ; ++ SPI_write_bit(bit); ++ } ++ ++ SPI_write_bit(0); // dumy clock ++ SPI_write_bit(0); // dumy clock ++ ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++} ++ ++/***************************************************** ++* SPI_pre_st ++* preambler: 32 bits '1' start bit: '01' ++*****************************************************/ ++void SPI_pre_st(void) ++{ ++ int i; ++ ++ for(i=0;i<32;i++) // PREAMBLE ++ SPI_write_bit(1); ++ SPI_write_bit(0); // ST ++ SPI_write_bit(1); ++} ++ ++ ++/*********************************************************** ++* SPI_CS_enable ++* before access ,you have to enable Chip Select. (pull high) ++* When fisish, you should pull low !! ++*************************************************************/ ++void SPI_CS_enable(unsigned char enable) ++{ ++#ifdef CONFIG_IT8712_GPIO ++ ++ unsigned char iomode,status; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ ++ status = inb_gpio( LPC_GPIO_SET); ++ if(enable) ++ status |= ADM_EECS ; //EECS high ++ else ++ status &= ~(ADM_EECS) ; //EECS low ++ ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ ++ status |= ADM_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(ADM_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++#else ++ unsigned int addr,value; ++ ++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR); ++ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */ ++ writel(value,addr); ++ ++ if(enable) ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_EECS,addr); /* set EECS to 1 */ ++ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_EECS,addr); /* set EECS to 0 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); /* set EECK to 1 */ // at least one clock after CS low ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); /* set EECK to 0 */ ++ } ++#endif ++} ++ ++/********************************************************* ++* SPI_Set_VLAN: group ports as VLAN ++* LAN -> VLAN number : 0~16 ++* port_mask -> ports which would group as LAN ++* ex. 0x03 = 0000 0011 ++* port 0 and port 1 ++*********************************************************/ ++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask) ++{ ++ unsigned int i,value=0; ++ unsigned reg_add = 0x13 + LAN ; ++ ++ for(i=0;i<ADM6996_PORT_NO;i++) ++ { if(port_mask&0x01) ++ { ++ switch(i) ++ { ++ case 0: value|=0x0001; break; //port0:bit[0] ++ case 1: value|=0x0004; break; //port1:bit[2] ++ case 2: value|=0x0010; break; //port2:bit[4] ++ case 3: value|=0x0040; break; //port3:bit[6] ++ case 4: value|=0x0080; break; //port4:bit[7] ++ case 5: value|=0x0100; break; //port5:bit[8] ++ } ++ } ++ port_mask >>= 1; ++ } ++ ++ SPI_write(reg_add,value); ++} ++ ++ ++/******************************************* ++* SPI_Set_tag ++* port -> port number to set tag or untag ++* tag -> 0/set untag, 1/set tag ++* In general, tag is for MII port. LAN and ++* WAN port is configed as untag!! ++********************************************/ ++void SPI_Set_tag(unsigned int port,unsigned tag) ++{ ++ unsigned int regadd,value; ++ ++ // mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9) ++ if(port<=3) ++ regadd=2*port+1; ++ else if(port==4) regadd = 8 ; ++ else regadd = 9 ; ++ ++ ++ value = SPI_read(0,regadd); //read original setting ++ ++ if(tag) ++ value |= 0x0010 ; // set tag ++ else ++ value &= 0xFFEF ; // set untag ++ ++ SPI_write(regadd,value); // write back!! ++} ++ ++/************************************************ ++* SPI_Set_PVID ++* PVID -> PVID number : ++* port_mask -> ports which would group as LAN ++* ex. 0x0F = 0000 1111 ==> port 0~3 ++************************************************/ ++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask) ++{ ++ unsigned int i,value=0; ++ ++ PVID &= 0x000F ; ++ ++ for(i=0;i<ADM699X_PORT_NO;i++) ++ { if(port_mask&0x01) ++ { ++#ifdef CONFIG_ADM_6996 ++ switch(i) ++ { ++ case 0: ++ value = SPI_read(0,0x01); // read original value ++ value &= 0xC3FF ; //set PVIC column as 0 first ++ value |= PVID << 10 ; //Set PVID column as PVID ++ SPI_write(0x01,value); //write back ++ break; ++ case 1: ++ value = SPI_read(0,0x03); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write(0x03,value); ++ break; ++ case 2: ++ value = SPI_read(0,0x05); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write(0x05,value); ++ break; ++ case 3: ++ value = SPI_read(0,0x07); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write(0x07,value); ++ break; ++ case 4: ++ value = SPI_read(0,0x08); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write(0x08,value); ++ break; ++ case 5: ++ value = SPI_read(0,0x09); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write(0x09,value); ++ break; ++ } ++#endif ++#ifdef CONFIG_ADM_6999 ++ value = SPI_read(0,(unsigned char)i+1); ++ value &= 0xC3FF ; ++ value |= PVID << 10 ; ++ SPI_write((unsigned char)i+1,value); ++#endif ++ } ++ port_mask >>= 1; ++ } ++} ++ ++ ++/************************************************ ++* SPI_get_PVID ++* port -> which ports to VID ++************************************************/ ++unsigned int SPI_Get_PVID(unsigned int port) ++{ ++ unsigned int value=0; ++ ++ if (port>=ADM6996_PORT_NO) ++ return 0; ++ ++ switch(port) ++ { ++ case 0: ++ value = SPI_read(0,0x01); // read original value ++ value &= 0x3C00 ; // get VID ++ value = value >> 10 ; // Shift ++ break; ++ case 1: ++ value = SPI_read(0,0x03); ++ value &= 0x3C00 ; ++ value = value >> 10 ; ++ break; ++ case 2: ++ value = SPI_read(0,0x05); ++ value &= 0x3C00 ; ++ value = value >> 10 ; ++ break; ++ case 3: ++ value = SPI_read(0,0x07); ++ value &= 0x3C00 ; ++ value = value >> 10 ; ++ break; ++ case 4: ++ value = SPI_read(0,0x08); ++ value &= 0x3C00 ; ++ value = value >> 10 ; ++ break; ++ case 5: ++ value = SPI_read(0,0x09); ++ value &= 0x3C00 ; ++ value = value >> 10 ; ++ break; ++ } ++ return value ; ++} ++ ++ ++/********************************************** ++* SPI_mac_clone ++* port -> the port which will lock or unlock ++* lock -> 0/the port will be unlock ++* 1/the port will be locked ++**********************************************/ ++void SPI_mac_lock(unsigned int port, unsigned char lock) ++{ ++ unsigned int i,value=0; ++ ++ value = SPI_read(0,0x12); // read original ++ ++ for(i=0;i<ADM6996_PORT_NO;i++) ++ { if(lock) // lock port ++ { ++ switch(port) ++ { ++ case 0: value|=0x0001; break; //port0:bit[0] ++ case 1: value|=0x0004; break; //port1:bit[2] ++ case 2: value|=0x0010; break; //port2:bit[4] ++ case 3: value|=0x0040; break; //port3:bit[6] ++ case 4: value|=0x0080; break; //port4:bit[7] ++ case 5: value|=0x0100; break; //port5:bit[8] ++ } ++ } ++ else ++ { ++ switch(i) // unlock port ++ { ++ case 0: value&=0xFFFE; break; ++ case 1: value&=0xFFFB; break; ++ case 2: value&=0xFFEF; break; ++ case 3: value&=0xFFBF; break; ++ case 4: value&=0xFF7F; break; ++ case 5: value&=0xFEFF; break; ++ } ++ } ++ } ++ ++ SPI_write(0x12,value); ++} ++ ++ ++/*************************************************** ++* SPI_learn_pause ++* pause = 01-80-c2-00-00-01 ++* DA=distination address ++* forward -> 0: if DA == pause then drop and stop mac learning ++* 1: if DA == pause ,then forward it ++***************************************************/ ++void SPI_pause_cmd_forward(unsigned char forward) ++{ ++ unsigned int value=0; ++ ++ value = SPI_read(0,0x2C); // read original setting ++ if(forward) ++ value |= 0x2000; // set bit[13] '1' ++ else ++ value &= 0xDFFF; // set bit[13] '0' ++ ++ SPI_write(0x2C,value); ++ ++} ++ ++ ++/************************************************ ++* SPI_read ++* table -> which table to be read: 1/count 0/EEPROM ++* addr -> Address to be read ++* return : Value of the register ++*************************************************/ ++unsigned int SPI_read(unsigned char table,unsigned char addr) ++{ ++ int i ; ++ unsigned int value=0; ++ unsigned int bit; ++#ifdef CONFIG_IT8712_GPIO ++ unsigned char status; ++#else ++ unsigned int ad1; ++#endif ++ ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++ ++ SPI_CS_enable(0); ++ ++ SPI_pre_st(); // PRE+ST ++ SPI_write_bit(1); // OPCODE '10' for read ++ SPI_write_bit(0); ++ ++ (table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ; // table select ++ ++ SPI_write_bit(0); // Device Address ++ SPI_write_bit(0); ++ ++ ++ // send 7 bits address to be read ++ for (i=6;i>=0;i--) { ++ bit= ((addr>>i) & 0x01) ? 1 :0 ; ++ SPI_write_bit(bit); ++ } ++ ++ ++ // turn around ++ SPI_read_bit(); // TA_Z ++ ++ value=0; ++ for (i=31;i>=0;i--) { // READ DATA ++ bit=SPI_read_bit(); ++ value |= bit << i ; ++ } ++ ++ SPI_read_bit(); // dumy clock ++ SPI_read_bit(); // dumy clock ++ ++ if(!table) // EEPROM, only fetch 16 bits data ++ { ++ if(addr&0x01) // odd number content (register,register-1) ++ value >>= 16 ; // so we remove the rear 16bits ++ else // even number content (register+1,register), ++ value &= 0x0000FFFF ; // so we keep the rear 16 bits ++ } ++ ++ ++ SPI_CS_enable(0); ++ ++#ifdef CONFIG_IT8712_GPIO ++ status = inb_gpio(LPC_GPIO_SET); ++ status &= ~(ADM_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++#else ++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MISO,ad1); /* set MISO to 0 */ ++#endif ++ ++ return(value); ++ ++} ++ ++ ++ ++/************************************************** ++* SPI_port_en ++* port -> Number of port to config ++* enable -> 1/ enable this port ++* 0/ disable this port ++**************************************************/ ++void SPI_port_enable(unsigned int port,unsigned char enable) ++{ ++ unsigned int reg_val ; ++ unsigned char reg_add ; ++ ++ if(port<=3) ++ reg_add=2*port+1; ++ else if(port==4) reg_add = 8 ; ++ else reg_add = 9 ; ++ ++ reg_val = SPI_read(0,reg_add); ++ if(enable) ++ { ++ reg_val &= 0xFFDF ; ++ SPI_write(reg_add,reg_val); ++ } ++ else ++ { ++ reg_val |= 0x0020 ; ++ SPI_write(reg_add,reg_val); ++ } ++} ++ ++/******************************************************** ++* get port status ++* port -> specify the port number to get configuration ++*********************************************************/ ++void SPI_get_status(unsigned int port) ++{ ++/* unsigned int reg_val,add_offset[6]; ++ struct PORT_STATUS *status; ++ status = &port_state[port]; ++ ++ if(port>(ADM6996_PORT_NO-1)) ++ return ; ++ ++ // Link estabilish , speed, deplex, flow control ? ++ if(port < 5 ) ++ { ++ reg_val = SPI_read(1, 1) ; ++ if(port < 4) ++ reg_val >>= port*8 ; ++ else ++ reg_val >>=28 ; ++ status->link = reg_val & 0x00000001 ; ++ status->speed = reg_val & 0x00000002 ; ++ status->duplex = reg_val & 0x00000004 ; ++ status->flow_ctl = reg_val & 0x00000008 ; ++ } ++ else if(port ==5 ) ++ { ++ reg_val = SPI_read(1, 2) ; ++ status->link = reg_val & 0x00000001 ; ++ status->speed = reg_val & 0x00000002 ; ++ status->duplex = reg_val & 0x00000008 ; ++ status->flow_ctl = reg_val & 0x00000010 ; ++ } ++ ++ // Mac Lock ? ++ reg_val = SPI_read(0,0x12); ++ switch(port) ++ { ++ case 0: status->mac_lock = reg_val & 0x00000001; ++ case 1: status->mac_lock = reg_val & 0x00000004; ++ case 2: status->mac_lock = reg_val & 0x00000010; ++ case 3: status->mac_lock = reg_val & 0x00000040; ++ case 4: status->mac_lock = reg_val & 0x00000080; ++ case 5: status->mac_lock = reg_val & 0x00000100; ++ } ++ ++ // port enable ? ++ add_offset[0] = 0x01 ; add_offset[1] = 0x03 ; ++ add_offset[2] = 0x05 ; add_offset[3] = 0x07 ; ++ add_offset[4] = 0x08 ; add_offset[5] = 0x09 ; ++ reg_val = SPI_read(0,add_offset[port]); ++ status->port_disable = reg_val & 0x0020; ++ ++ ++ // Packet Count ... ++ add_offset[0] = 0x04 ; add_offset[1] = 0x06 ; ++ add_offset[2] = 0x08 ; add_offset[3] = 0x0a ; ++ add_offset[4] = 0x0b ; add_offset[5] = 0x0c ; ++ ++ reg_val = SPI_read(1,add_offset[port]); ++ status->rx_pac_count = reg_val ; ++ reg_val = SPI_read(1,add_offset[port]+9); ++ status->rx_pac_byte = reg_val ; ++ reg_val = SPI_read(1,add_offset[port]+18); ++ status->tx_pac_count = reg_val ; ++ reg_val = SPI_read(1,add_offset[port]+27); ++ status->tx_pac_byte = reg_val ; ++ reg_val = SPI_read(1,add_offset[port]+36); ++ status->collision_count = reg_val ; ++ reg_val = SPI_read(1,add_offset[port]+45); ++ status->error_count = reg_val ; ++ reg_val = SPI_read(1, 0x3A); ++ switch(port) ++ { ++ case 0: status->rx_pac_count_overflow = reg_val & 0x00000001; ++ status->rx_pac_byte_overflow = reg_val & 0x00000200 ; ++ case 1: status->rx_pac_count_overflow = reg_val & 0x00000004; ++ status->rx_pac_byte_overflow = reg_val & 0x00000800 ; ++ case 2: status->rx_pac_count_overflow = reg_val & 0x00000010; ++ status->rx_pac_byte_overflow = reg_val & 0x00002000 ; ++ case 3: status->rx_pac_count_overflow = reg_val & 0x00000040;; ++ status->rx_pac_byte_overflow = reg_val & 0x00008000 ; ++ case 4: status->rx_pac_count_overflow = reg_val & 0x00000080; ++ status->rx_pac_byte_overflow = reg_val & 0x00010000 ; ++ case 5: status->rx_pac_count_overflow = reg_val & 0x00000100; ++ status->rx_pac_byte_overflow = reg_val & 0x00020000 ; ++ } ++ ++ reg_val = SPI_read(1, 0x3B); ++ switch(port) ++ { ++ case 0: status->tx_pac_count_overflow = reg_val & 0x00000001; ++ status->tx_pac_byte_overflow = reg_val & 0x00000200 ; ++ case 1: status->tx_pac_count_overflow = reg_val & 0x00000004; ++ status->tx_pac_byte_overflow = reg_val & 0x00000800 ; ++ case 2: status->tx_pac_count_overflow = reg_val & 0x00000010; ++ status->tx_pac_byte_overflow = reg_val & 0x00002000 ; ++ case 3: status->tx_pac_count_overflow = reg_val & 0x00000040;; ++ status->tx_pac_byte_overflow = reg_val & 0x00008000 ; ++ case 4: status->tx_pac_count_overflow = reg_val & 0x00000080; ++ status->tx_pac_byte_overflow = reg_val & 0x00010000 ; ++ case 5: status->tx_pac_count_overflow = reg_val & 0x00000100; ++ status->tx_pac_byte_overflow = reg_val & 0x00020000 ; ++ } ++*/ ++ ++ unsigned int reg_val; ++ struct PORT_STATUS *status; ++ status = &port_state[port]; ++ ++ if(port>=ADM6999_PORT_NO) ++ return ; ++ ++ // Link estabilish , speed, deplex, flow control ? ++ if(port < ADM6999_PORT_NO-1 ) ++ { ++ reg_val = SPI_read(1, 0x01) ; ++ reg_val = reg_val >> port*4 ; ++ status->link = reg_val & 0x00000001 ; ++ status->speed = reg_val & 0x00000002 ; ++ status->duplex = reg_val & 0x00000004 ; ++ status->flow_ctl = reg_val & 0x00000008 ; ++ } ++ else if(port == (ADM6999_PORT_NO-1) ) ++ { ++ reg_val = SPI_read(1, 0x02) ; ++ status->link = reg_val & 0x00000001 ; ++ status->speed = reg_val & 0x00000002 ; ++ status->duplex = reg_val & 0x00000008 ; ++ status->flow_ctl = reg_val & 0x00000010 ; ++ } ++ ++ // Mac Lock ? ++ reg_val = SPI_read(0,0x12); ++ reg_val = reg_val >> port ; ++ reg_val = reg_val & 0x01 ; ++ status->mac_lock = reg_val ? 0x01:0x00 ; ++ ++ // port enable ? ++ reg_val = SPI_read(0,(unsigned char)port+1); ++ status->port_disable = reg_val & 0x0020; ++ ++ // Packet Count ... ++ reg_val = SPI_read(1,(unsigned char)port+0x04); ++ status->rx_pac_count = reg_val ; ++ reg_val = SPI_read(1,(unsigned char)port+0x0D); ++ status->rx_pac_byte = reg_val ; ++ reg_val = SPI_read(1,(unsigned char)port+0x16); ++ status->tx_pac_count = reg_val ; ++ reg_val = SPI_read(1,(unsigned char)port+0x1F); ++ status->tx_pac_byte = reg_val ; ++ reg_val = SPI_read(1,(unsigned char)port+0x28); ++ status->collision_count = reg_val ; ++ reg_val = SPI_read(1,(unsigned char)port+0x31); ++ status->error_count = reg_val ; ++ reg_val = SPI_read(1, 0x3A); ++ reg_val = reg_val >> port ; ++ status->rx_pac_count_overflow = reg_val & 0x00000001; ++ reg_val = reg_val >> 0x09 ; ++ status->rx_pac_byte_overflow = reg_val & 0x00000001 ; ++ ++ reg_val = SPI_read(1, 0x3B); ++ reg_val = reg_val >> port ; ++ status->tx_pac_count_overflow = reg_val & 0x00000001; ++ reg_val = reg_val >> 0x09 ; ++ status->tx_pac_byte_overflow = reg_val & 0x00000001 ; ++ ++ reg_val = SPI_read(1, 0x3C); ++ reg_val = reg_val >> port ; ++ status->collision_count_overflow = reg_val & 0x00000001; ++ reg_val = reg_val >> 0x09 ; ++ status->error_count_overflow = reg_val & 0x00000001 ; ++ ++} ++ ++unsigned int SPI_get_identifier(void) ++{ ++ unsigned int flag=0; ++ ++#ifdef CONFIG_IT8712_GPIO ++ ++ if (!it8712_exist) { ++ return -ENODEV; ++ } ++ printk("it8712_gpio init\n"); ++ ++ /* initialize registers */ ++ // switch all multi-function pins to GPIO ++ LPCSetConfig(LDN_GPIO, 0x28, 0xff); ++ ++ // set simple I/O base address ++ LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8); ++ LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8); ++ ++ // select GPIO to simple I/O ++ LPCSetConfig(LDN_GPIO, 0xc3, 0xff); ++ ++ // enable internal pull-up ++ LPCSetConfig(LDN_GPIO, 0xbb, 0xff); ++ ++#endif ++ ++ flag = SPI_read(1,0x00); ++ printk("Get ADM identifier %6x\n",flag); ++ if ((flag & 0xFFFF0) == 0x21120) { ++ printk("ADM699X Found\n"); ++ return 1; ++ } ++ else { ++ printk("ADM699X not Found\n"); ++ return 0; ++ } ++} ++ +Index: linux-2.6.23.16/drivers/net/sl351x_crc16.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_crc16.c 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,93 @@ ++/**************************************************************************** ++* Name : sl351x_crc16.c ++* Description : ++* Implement CRC16 ++* refer to RFC1662 ++* History ++* ++* Date Writer Description ++* ----------- ----------- ------------------------------------------------- ++* 09/14/2005 Gary Chen Create ++* ++****************************************************************************/ ++ ++#define INITFCS16 0xffff /* Initial FCS value */ ++#define GOODFCS16 0xf0b8 /* Good final FCS value */ ++#define SWAP_WORD(x) (unsigned short)((((unsigned short)x & 0x00FF) << 8) | \ ++ (((unsigned short)x & 0xFF00) >> 8)) ++ ++/*---------------------------------------------------------------------- ++* x**0 + x**5 + x**12 + x**16 ++*----------------------------------------------------------------------*/ ++static const unsigned short crc16_tbl[256] = { ++ 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf, ++ 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7, ++ 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e, ++ 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876, ++ 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd, ++ 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5, ++ 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c, ++ 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974, ++ 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb, ++ 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3, ++ 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a, ++ 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72, ++ 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9, ++ 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1, ++ 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738, ++ 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70, ++ 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7, ++ 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff, ++ 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036, ++ 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e, ++ 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5, ++ 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd, ++ 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134, ++ 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c, ++ 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3, ++ 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb, ++ 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232, ++ 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a, ++ 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1, ++ 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9, ++ 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330, ++ 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78 ++}; ++ ++/*---------------------------------------------------------------------- ++* hash_crc16 ++*----------------------------------------------------------------------*/ ++unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len) ++{ ++ while (len--) ++ { ++ crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff]; ++ } ++ ++ return (crc); ++ ++} ++ ++/*---------------------------------------------------------------------- ++* hash_check_crc16 ++*----------------------------------------------------------------------*/ ++unsigned long hash_check_crc16(unsigned char *datap, unsigned long len) ++{ ++ unsigned short crc; ++ ++ crc = hash_crc16(INITFCS16, datap, len ); ++ return (crc == GOODFCS16) ? 0 : 1; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_gen_crc16 ++*----------------------------------------------------------------------*/ ++unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len) ++{ ++ unsigned short crc; ++ ++ crc = hash_crc16(INITFCS16, datap, len); ++ crc ^= 0xffff; ++ ++ return(SWAP_WORD(crc)); ++} +Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 16:59:23.361457295 +0200 +@@ -0,0 +1,5622 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl351x_gmac.c ++* Description : ++* Ethernet device driver for Storlink SL351x FPGA ++* ++* History ++* ++* Date Writer Description ++* ----------- ----------- ------------------------------------------------- ++* 08/22/2005 Gary Chen Create and implement ++* 27/10/2005 CH Hsu Porting to Linux ++* ++****************************************************************************/ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/mm.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/it8712.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/skbuff.h> ++#include <linux/in.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#include <linux/udp.h> ++ ++#include <linux/mtd/kvctl.h> ++ ++#define MIDWAY ++#define SL_LEPUS ++#define VITESSE_G5SWITCH 1 ++ ++#ifndef CONFIG_SL351x_RXTOE ++//#define CONFIG_SL351x_RXTOE 1 ++#endif ++#undef CONFIG_SL351x_RXTOE ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <asm/arch/sl351x_hash_cfg.h> ++#include <asm/arch/sl351x_nat_cfg.h> ++ ++#ifdef CONFIG_SL351x_SYSCTL ++#include <linux/sysctl_storlink.h> ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++#include <asm/arch/sl351x_toe.h> ++#include <net/tcp.h> ++#include <linux/tcp.h> ++#include <linux/ip.h> ++#endif ++ ++// #define SL351x_TEST_WORKAROUND ++#ifdef CONFIG_SL351x_NAT ++#define CONFIG_SL_NAPI 1 ++#endif ++#define GMAX_TX_INTR_DISABLED 1 ++#define DO_HW_CHKSUM 1 ++#define ENABLE_TSO 1 ++#define GMAC_USE_TXQ0 1 ++// #define NAT_WORKAROUND_BY_RESET_GMAC 1 ++// #define HW_RXBUF_BY_KMALLOC 1 ++//#define _DUMP_TX_TCP_CONTENT 1 ++#define br_if_ioctl 1 ++#define GMAC_LEN_1_2_ISSUE 1 ++ ++#define GMAC_EXISTED_FLAG 0x5566abcd ++#define CONFIG_MAC_NUM GMAC_NUM ++#define GMAC0_BASE TOE_GMAC0_BASE ++#define GMAC1_BASE TOE_GMAC1_BASE ++#define PAUSE_SET_HW_FREEQ (TOE_HW_FREEQ_DESC_NUM / 2) ++#define PAUSE_REL_HW_FREEQ ((TOE_HW_FREEQ_DESC_NUM / 2) + 10) ++#define DEFAULT_RXQ_MAX_CNT 256 ++#ifdef L2_jumbo_frame ++#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F) ++#endif ++ ++/* define chip information */ ++#define DRV_NAME "SL351x" ++#define DRV_VERSION "0.1.4" ++#define SL351x_DRIVER_NAME DRV_NAME " Giga Ethernet driver " DRV_VERSION ++ ++#define toe_gmac_enable_interrupt(irq) enable_irq(irq) ++#define toe_gmac_disable_interrupt(irq) disable_irq(irq) ++ ++#ifdef SL351x_GMAC_WORKAROUND ++#define GMAC_SHORT_FRAME_THRESHOLD 10 ++static struct timer_list gmac_workround_timer_obj; ++void sl351x_poll_gmac_hanged_status(u32 data); ++#ifdef CONFIG_SL351x_NAT ++//#define IxscriptMate_1518 1 ++ void sl351x_nat_workaround_init(void); ++ #ifndef NAT_WORKAROUND_BY_RESET_GMAC ++ static void sl351x_nat_workaround_handler(void); ++ #endif ++#endif ++#endif ++ ++#ifdef GMAC_LEN_1_2_ISSUE ++ #define _DEBUG_PREFETCH_NUM 256 ++static int _debug_prefetch_cnt; ++static char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4))); ++#endif ++/************************************************************* ++ * Global Variable ++ *************************************************************/ ++static int gmac_initialized = 0; ++TOE_INFO_T toe_private_data; ++//static int do_again = 0; ++spinlock_t gmac_fq_lock; ++unsigned int FLAG_SWITCH; ++ ++static unsigned int next_tick = 3 * HZ; ++static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}}; ++ ++#undef CONFIG_SL351x_RXTOE ++extern NAT_CFG_T nat_cfg; ++ ++/************************************************/ ++/* function declare */ ++/************************************************/ ++static int gmac_set_mac_address(struct net_device *dev, void *addr); ++static unsigned int gmac_get_phy_vendor(int phy_addr); ++static void gmac_set_phy_status(struct net_device *dev); ++void gmac_get_phy_status(struct net_device *dev); ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); ++static void gmac_tx_timeout(struct net_device *dev); ++static int gmac_phy_thread (void *data); ++struct net_device_stats * gmac_get_stats(struct net_device *dev); ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static void gmac_set_rx_mode(struct net_device *dev); ++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs); ++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp); ++unsigned int mii_read(unsigned char phyad,unsigned char regad); ++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value); ++void mac_init_drv(void); ++ ++static void toe_init_free_queue(void); ++static void toe_init_swtx_queue(void); ++static void toe_init_default_queue(void); ++#ifdef CONFIG_SL351x_RXTOE ++static void toe_init_interrupt_queue(void); ++#endif ++static void toe_init_interrupt_config(void); ++static void toe_gmac_sw_reset(void); ++static int toe_gmac_init_chip(struct net_device *dev); ++static void toe_gmac_enable_tx_rx(struct net_device* dev); ++static void toe_gmac_disable_tx_rx(struct net_device *dev); ++static void toe_gmac_hw_start(struct net_device *dev); ++static void toe_gmac_hw_stop(struct net_device *dev); ++static int toe_gmac_clear_counter(struct net_device *dev); ++static void toe_init_gmac(struct net_device *dev); ++static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt); ++#ifdef CONFIG_SL_NAPI ++static int gmac_rx_poll(struct net_device *dev, int *budget); ++// static void toe_gmac_disable_rx(struct net_device *dev); ++// static void toe_gmac_enable_rx(struct net_device *dev); ++#endif ++ ++u32 mac_read_dma_reg(int mac, unsigned int offset); ++void mac_write_dma_reg(int mac, unsigned int offset, u32 data); ++void mac_stop_txdma(struct net_device *dev); ++void mac_get_sw_tx_weight(struct net_device *dev, char *weight); ++void mac_set_sw_tx_weight(struct net_device *dev, char *weight); ++void mac_get_hw_tx_weight(struct net_device *dev, char *weight); ++void mac_set_hw_tx_weight(struct net_device *dev, char *weight); ++static inline void toe_gmac_fill_free_q(void); ++ ++#ifdef VITESSE_G5SWITCH ++extern int Get_Set_port_status(void); ++extern int SPI_default(void); ++extern unsigned int SPI_get_identifier(void); ++void gmac_get_switch_status(struct net_device *dev); ++unsigned int Giga_switch=0; ++unsigned int switch_port_no=0; ++unsigned int ever_dwon=0; ++#endif ++ ++/************************************************/ ++/* GMAC function declare */ ++/************************************************/ ++static int gmac_open (struct net_device *dev); ++static int gmac_close (struct net_device *dev); ++static void gmac_cleanup_module(void); ++static void gmac_get_mac_address(void); ++ ++#ifdef CONFIG_SL351x_NAT ++static void toe_init_hwtx_queue(void); ++extern void sl351x_nat_init(void); ++extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off); ++extern int sl351x_nat_output(struct sk_buff *skb, int port); ++extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev); ++extern void sl351x_toe_init(void); ++extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status); ++extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr); ++#endif ++ ++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2); ++void mac_set_rule_enable_bit(int mac, int rule, int data); ++int mac_set_rule_action(int mac, int rule, int data); ++int mac_get_MRxCRx(int mac, int rule, int ctrlreg); ++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data); ++ ++/*---------------------------------------------------------------------- ++* Ethernet Driver init ++*----------------------------------------------------------------------*/ ++ ++static int __init gmac_init_module(void) ++{ ++ GMAC_INFO_T *tp; ++ struct net_device *dev; ++ int i,j; ++ unsigned int chip_id; ++// unsigned int chip_version; ++ ++#ifdef CONFIG_SL3516_ASIC ++{ ++ unsigned int val; ++ /* set GMAC global register */ ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10); ++ val = val | 0x005f0000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10); ++// writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board ++ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20); ++// writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board ++ ++ //debug_Aaron ++ //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board ++ writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board ++ ++ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24); ++ writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C); ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04); ++ if((val&(1<<20))==0){ // GMAC1 enable ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30); ++ val = (val & 0xe7ffffff) | 0x08000000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30); ++ } ++} ++#endif ++ ++#ifdef VITESSE_G5SWITCH ++ Giga_switch = SPI_get_identifier(); ++ if(Giga_switch) ++ switch_port_no = SPI_default(); ++#endif ++ ++ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0); ++ if (chip_id == 0x3512C1) ++ { ++ writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board ++ writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board ++ } ++//#endif ++ ++ mac_init_drv(); ++ ++ printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__); ++ ++// init_waitqueue_entry(&wait, current); ++ ++ // printk("GMAC Init......\n"); ++ ++ i = 0; ++ for(j = 0; i<CONFIG_MAC_NUM; j++) ++ { ++ i=j; ++ if(Giga_switch){ // if gswitch present, swap eth0/1 ++ if(j==0) ++ i=1; ++ else if(j==1) ++ i=0; ++ } ++ ++ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i]; ++ tp->dev = NULL; ++ if (tp->existed != GMAC_EXISTED_FLAG) continue; ++ ++ dev = alloc_etherdev(0); ++ if (dev == NULL) ++ { ++ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i); ++ return -ENOMEM; ++ } ++ ++ dev->priv=tp; ++ tp->dev = dev; ++ ++ SET_MODULE_OWNER(dev); ++ ++ // spin_lock_init(&tp->lock); ++ spin_lock_init(&gmac_fq_lock); ++ dev->base_addr = tp->base_addr; ++ dev->irq = tp->irq; ++ dev->open = gmac_open; ++ dev->stop = gmac_close; ++ dev->hard_start_xmit = gmac_start_xmit; ++ dev->get_stats = gmac_get_stats; ++ dev->set_multicast_list = gmac_set_rx_mode; ++ dev->set_mac_address = gmac_set_mac_address; ++ dev->do_ioctl = gmac_netdev_ioctl; ++ dev->tx_timeout = gmac_tx_timeout; ++ dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT; ++#ifdef L2_jumbo_frame ++ dev->mtu = 2018; //2002 ,2018 ++#endif ++ if (tp->port_id == 0) ++ dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM; ++ else ++ dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM; ++ ++#ifdef DO_HW_CHKSUM ++ dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; ++#ifdef ENABLE_TSO ++ dev->features |= NETIF_F_TSO; ++#endif ++#endif ++#ifdef CONFIG_SL_NAPI ++ dev->poll = gmac_rx_poll; ++ dev->weight = 64; ++#endif ++ ++ if (register_netdev(dev)) ++ { ++ gmac_cleanup_module(); ++ return(-1); ++ } ++ } ++ ++ ++// FLAG_SWITCH = 0 ; ++// FLAG_SWITCH = SPI_get_identifier(); ++// if(FLAG_SWITCH) ++// { ++// printk("Configure ADM699X...\n"); ++// SPI_default(); //Add by jason for ADM699X configuration ++// } ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_cleanup_module ++*----------------------------------------------------------------------*/ ++ ++static void gmac_cleanup_module(void) ++{ ++ int i; ++ ++#ifdef SL351x_GMAC_WORKAROUND ++ del_timer(&gmac_workround_timer_obj); ++#endif ++ ++ for (i=0;i<CONFIG_MAC_NUM;i++) ++ { ++ if (toe_private_data.gmac[i].dev) ++ { ++ unregister_netdev(toe_private_data.gmac[i].dev); ++ toe_private_data.gmac[i].dev = NULL; ++ } ++ } ++ return ; ++} ++ ++module_init(gmac_init_module); ++module_exit(gmac_cleanup_module); ++ ++ ++/*---------------------------------------------------------------------- ++* gmac_read_reg ++*----------------------------------------------------------------------*/ ++static inline unsigned int gmac_read_reg(unsigned int base, unsigned int offset) ++//static unsigned int gmac_read_reg(unsigned int base, unsigned int offset) ++{ ++ volatile unsigned int reg_val; ++ ++ reg_val = readl(base + offset); ++ return (reg_val); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_write_reg ++*----------------------------------------------------------------------*/ ++static inline void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask) ++//static void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask) ++{ ++ volatile unsigned int reg_val; ++ unsigned int *addr; ++ ++ reg_val = ( gmac_read_reg(base, offset) & (~bit_mask) ) | (data & bit_mask); ++ addr = (unsigned int *)(base + offset); ++ writel(reg_val,addr); ++ return; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_init_drv ++*----------------------------------------------------------------------*/ ++void mac_init_drv(void) ++{ ++ TOE_INFO_T *toe; ++ int i; ++ QUEUE_THRESHOLD_T threshold; ++ u32 *destp; ++ unsigned int chip_id,chip_version; ++ ++ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0); ++ chip_version = chip_id & 0x1 ; ++ ++ if (!gmac_initialized) ++ { ++ gmac_initialized = 1; ++ ++ // clear non TOE Queue Header Area ++ destp = (u32 *)TOE_NONTOE_QUE_HDR_BASE; ++ for (; destp < (u32 *)NONTOE_Q_HDR_AREA_END; destp++) ++ *destp = 0x00; ++ ++ // clear TOE Queue Header Area ++ destp = (u32 *)TOE_TOE_QUE_HDR_BASE; ++ for (; destp < (u32 *)TOE_Q_HDR_AREA_END; destp++) ++ *destp = 0x00; ++ ++ // init private data ++ toe = (TOE_INFO_T *)&toe_private_data; ++ memset((void *)toe, 0, sizeof(TOE_INFO_T)); ++ toe->gmac[0].base_addr = GMAC0_BASE; ++ toe->gmac[1].base_addr = GMAC1_BASE; ++ toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE; ++ toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE; ++ toe->gmac[0].auto_nego_cfg = 1; ++ toe->gmac[1].auto_nego_cfg = 1; ++#ifdef CONFIG_SL3516_ASIC ++ toe->gmac[0].speed_cfg = GMAC_SPEED_1000; ++ toe->gmac[1].speed_cfg = GMAC_SPEED_1000; ++#else ++ toe->gmac[0].speed_cfg = GMAC_SPEED_100; ++ toe->gmac[1].speed_cfg = GMAC_SPEED_100; ++#endif ++ toe->gmac[0].full_duplex_cfg = 1; ++ toe->gmac[1].full_duplex_cfg = 1; ++#ifdef CONFIG_SL3516_ASIC ++ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000; ++ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000; ++#else ++ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100; ++ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100; ++#endif ++ toe->gmac[0].port_id = GMAC_PORT0; ++ toe->gmac[1].port_id = GMAC_PORT1; ++ toe->gmac[0].phy_addr = 0x1; ++ toe->gmac[1].phy_addr = 2; ++// toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0; ++ toe->gmac[0].irq =1; ++// toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1; ++ toe->gmac[1].irq =2; ++ toe->gmac[0].mac_addr1 = ð_mac[0][0]; ++ toe->gmac[1].mac_addr1 = ð_mac[1][0]; ++ ++ for (i=0; i<CONFIG_MAC_NUM; i++) ++ { ++ unsigned int data, phy_vendor; ++ gmac_write_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff); ++ data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2); ++ if (data == 0x55aa55aa) ++ { ++#ifdef VITESSE_G5SWITCH ++ if(Giga_switch && (i==1)){ ++ toe->gmac[i].existed = GMAC_EXISTED_FLAG; ++ break; ++ } ++#endif ++ phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr); ++ if (phy_vendor != 0 && phy_vendor != 0xffffffff) ++ toe->gmac[i].existed = GMAC_EXISTED_FLAG; ++ } ++ } ++ ++ // Write GLOBAL_QUEUE_THRESHOLD_REG ++ threshold.bits32 = 0; ++ threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 : ++ TOE_SW_FREEQ_DESC_NUM/2; ++ threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 : ++ TOE_HW_FREEQ_DESC_NUM/4; ++ threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 : ++ TOE_TOE_DESC_NUM/4; ++ threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 : ++ TOE_INTR_DESC_NUM/4; ++ writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG); ++ ++ FLAG_SWITCH = 0; ++ toe_gmac_sw_reset(); ++ toe_init_free_queue(); ++ toe_init_swtx_queue(); ++#ifdef CONFIG_SL351x_NAT ++ toe_init_hwtx_queue(); ++#endif ++ toe_init_default_queue(); ++#ifdef CONFIG_SL351x_RXTOE ++ toe_init_interrupt_queue(); ++#endif ++ toe_init_interrupt_config(); ++ ++#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE) ++ sl351x_hash_init(); ++#else ++ { ++ volatile u32 *dp1, *dp2, dword; ++ ++ dp1 = (volatile u32 *) TOE_V_BIT_BASE; ++ dp2 = (volatile u32 *) TOE_A_BIT_BASE; ++ ++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++) ++ { ++ *dp1++ = 0; ++ dword = *dp2++; // read-clear ++ } ++ } ++#endif ++ } ++ ++#ifdef SL351x_GMAC_WORKAROUND ++#ifdef CONFIG_SL351x_NAT ++ sl351x_nat_workaround_init(); ++#endif ++ init_timer(&gmac_workround_timer_obj); ++ if (chip_version == 1) ++ { ++ gmac_workround_timer_obj.expires = jiffies * 50; ++ } ++ else ++ { ++ gmac_workround_timer_obj.expires = jiffies + 2; ++ } ++ gmac_workround_timer_obj.data = (unsigned long)&gmac_workround_timer_obj; ++ gmac_workround_timer_obj.function = (void *)&sl351x_poll_gmac_hanged_status; ++ add_timer(&gmac_workround_timer_obj); ++#endif ++} ++ ++/*---------------------------------------------------------------------- ++* toe_init_free_queue ++* (1) Initialize the Free Queue Descriptor Base Address & size ++* Register: TOE_GLOBAL_BASE + 0x0004 ++* (2) Initialize DMA Read/Write pointer for ++* SW Free Queue and HW Free Queue ++* (3) Initialize DMA Descriptors for ++* SW Free Queue and HW Free Queue, ++*----------------------------------------------------------------------*/ ++static void toe_init_free_queue(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ DMA_RWPTR_T rwptr_reg; ++// unsigned int rwptr_addr; ++ unsigned int desc_buf; ++ GMAC_RXDESC_T *sw_desc_ptr; ++ struct sk_buff *skb; ++#ifdef CONFIG_SL351x_NAT ++ GMAC_RXDESC_T *desc_ptr; ++ unsigned int buf_ptr; ++#endif ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)), ++ (dma_addr_t *)&toe->sw_freeq_desc_base_dma) ; ++ sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return; ++ } ++ memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)); ++ ++ // DMA Queue Base & Size ++ writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER, ++ TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG); ++ ++ // init descriptor base ++ toe->swfq_desc_base = desc_buf; ++ ++ // SW Free Queue Read/Write Pointer ++ rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1; ++ rwptr_reg.bits.rptr = 0; ++ toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32; ++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ ++ // SW Free Queue Descriptors ++ for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++) ++ { ++ sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE; ++ sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb ++ if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); while(1); ++ } ++ REG32(skb->data) = (unsigned int)skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); ++ // toe->rx_skb[i] = skb; ++ sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data); ++// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE); ++ sw_desc_ptr++; ++ } ++ ++#ifdef CONFIG_SL351x_NAT ++ if (sizeof(skb->cb) < 64) ++ { ++ printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1); ++ } ++ // init hardware free queues ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)), ++ (dma_addr_t *)&toe->hw_freeq_desc_base_dma) ; ++ desc_ptr = (GMAC_RXDESC_T *)desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return; ++ } ++ memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)); ++ ++ // DMA Queue Base & Size ++ writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER, ++ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG); ++ ++ // init descriptor base ++ toe->hwfq_desc_base = desc_buf; ++ ++ // HW Free Queue Read/Write Pointer ++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1; ++ rwptr_reg.bits.rptr = 0; ++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++#ifndef HW_RXBUF_BY_KMALLOC ++ buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, ++ (dma_addr_t *)&toe->hwfq_buf_base_dma); ++#else ++ buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL); ++ toe->hwfq_buf_base_dma = __pa(buf_ptr); ++#endif ++ if (!buf_ptr) ++ { ++ printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__); ++ while(1); // could not be happened, if happened, adjust the buffer descriptor number ++ return; ++ } ++ ++ toe->hwfq_buf_base = buf_ptr; ++ toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE); ++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma; ++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++) ++ { ++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE; ++ desc_ptr->word1.bits.sw_id = i; ++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr; ++// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE); ++ // consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE); ++ desc_ptr++; ++ buf_ptr += HW_RX_BUF_SIZE; ++ } ++#else ++ // DMA Queue Base & Size ++ writel((0) | TOE_SW_FREEQ_DESC_POWER, ++ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG); ++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1; ++ rwptr_reg.bits.rptr = 0; ++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++ ++#endif ++} ++/*---------------------------------------------------------------------- ++* toe_init_swtx_queue ++* (2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup ++* GMAC_SW_TX_QUEUE_BASE_REG(0x0050) ++* (2) Initialize DMA Read/Write pointer for ++* GMAC 0/1 SW TX Q0-5 ++*----------------------------------------------------------------------*/ ++static void toe_init_swtx_queue(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ DMA_RWPTR_T rwptr_reg; ++ unsigned int rwptr_addr; ++ unsigned int desc_buf; ++ ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ // GMAC-0, SW-TXQ ++ // The GMAC-0 and GMAC-0 maybe have different descriptor number ++ // so, not use for instruction ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)), ++ (dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ; ++ toe->gmac[0].swtxq_desc_base = desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_buf, 0, TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)); ++ writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER, ++ TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG); ++ ++ // GMAC0 SW TX Q0-Q5 ++ rwptr_reg.bits.wptr = 0; ++ rwptr_reg.bits.rptr = 0; ++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_SW_TXQ_NUM; i++) ++ { ++ toe->gmac[0].swtxq[i].rwptr_reg = rwptr_addr; ++ toe->gmac[0].swtxq[i].desc_base = desc_buf; ++ toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM; ++ desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T); ++ writel(rwptr_reg.bits32, rwptr_addr); ++ rwptr_addr+=4; ++ } ++ ++ // GMAC-1, SW-TXQ ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)), ++ (dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ; ++ toe->gmac[1].swtxq_desc_base = desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_buf, 0, TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)); ++ writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER, ++ TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG); ++ ++ ++ // GMAC1 SW TX Q0-Q5 ++ rwptr_reg.bits.wptr = 0; ++ rwptr_reg.bits.rptr = 0; ++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_SW_TXQ_NUM; i++) ++ { ++ toe->gmac[1].swtxq[i].rwptr_reg = rwptr_addr; ++ toe->gmac[1].swtxq[i].desc_base = desc_buf; ++ toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM; ++ desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T); ++ writel(rwptr_reg.bits32, rwptr_addr); ++ rwptr_addr+=4; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* toe_init_hwtx_queue ++* (2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size ++* GMAC_HW_TX_QUEUE_BASE_REG(0x0054) ++* (2) Initialize DMA Read/Write pointer for ++* GMAC 0/1 HW TX Q0-5 ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static void toe_init_hwtx_queue(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ DMA_RWPTR_T rwptr_reg; ++ unsigned int rwptr_addr; ++ unsigned int desc_buf; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ // GMAC-0, HW-TXQ ++ // The GMAC-0 and GMAC-0 maybe have different descriptor number ++ // so, not use for instruction ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)), ++ (dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ; ++ toe->gmac[0].hwtxq_desc_base = desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_buf, 0, TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)); ++ writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER, ++ TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG); ++ ++ // GMAC0 HW TX Q0-Q5 ++ rwptr_reg.bits.wptr = 0; ++ rwptr_reg.bits.rptr = 0; ++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ toe->gmac[0].hwtxq[i].desc_base = desc_buf; ++ desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T); ++ writel(rwptr_reg.bits32, rwptr_addr); ++ rwptr_addr+=4; ++ } ++ ++ // GMAC-1, HW-TXQ ++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)), ++ (dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ; ++ toe->gmac[1].hwtxq_desc_base = desc_buf; ++ if (!desc_buf) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_buf, 0, TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)); ++ writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER, ++ TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG); ++ ++ // GMAC1 HW TX Q0-Q5 ++ rwptr_reg.bits.wptr = 0; ++ rwptr_reg.bits.rptr = 0; ++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ toe->gmac[1].hwtxq[i].desc_base = desc_buf; ++ desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T); ++ writel(rwptr_reg.bits32, rwptr_addr); ++ rwptr_addr+=4; ++ } ++} ++#endif ++ ++/*---------------------------------------------------------------------- ++* toe_init_default_queue ++* (1) Initialize the default 0/1 Queue Header ++* Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000) ++* TOE_DEFAULT_Q1_HDR_BASE (0x60002008) ++* (2) Initialize Descriptors of Default Queue 0/1 ++*----------------------------------------------------------------------*/ ++static void toe_init_default_queue(void) ++{ ++ TOE_INFO_T *toe; ++ volatile NONTOE_QHDR_T *qhdr; ++ GMAC_RXDESC_T *desc_ptr; ++ DMA_SKB_SIZE_T skb_size; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)), ++ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma); ++ if (!desc_ptr) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)); ++ toe->gmac[0].default_desc_base = (unsigned int)desc_ptr; ++ toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM; ++ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE; ++ qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER; ++ qhdr->word1.bits32 = 0; ++ toe->gmac[0].rx_rwptr.bits32 = 0; ++ toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr; ++ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)), ++ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma); ++ if (!desc_ptr) ++ { ++ printk("%s::DMA_MALLOC fail !\n",__func__); ++ return ; ++ } ++ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)); ++ toe->gmac[1].default_desc_base = (unsigned int)desc_ptr; ++ toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM; ++ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE; ++ qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER; ++ qhdr->word1.bits32 = 0; ++ toe->gmac[1].rx_rwptr.bits32 = 0; ++ toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr; ++ ++ skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE; ++ skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE; ++ writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_init_interrupt_queue ++* (1) Initialize the Interrupt Queue Header ++* Register: TOE_INTR_Q_HDR_BASE (0x60002080) ++* (2) Initialize Descriptors of Interrupt Queues ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static void toe_init_interrupt_queue(void) ++{ ++ TOE_INFO_T *toe; ++ volatile NONTOE_QHDR_T *qhdr; ++ INTR_QHDR_T *desc_ptr; ++ // unsigned int desc_buf_addr; ++ int i; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)), ++ (dma_addr_t *)&toe->intr_desc_base_dma); ++ if (!desc_ptr) ++ { ++ printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__); ++ return ; ++ } ++ /* ++ desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)), ++ (dma_addr_t *)&toe->intr_buf_base_dma); ++ if (!desc_buf_addr) ++ { ++ printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__); ++ return ; ++ }*/ ++ printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr); ++ ++ memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)); ++// memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)); ++ toe->intr_desc_base = (unsigned int)desc_ptr; ++ toe->intr_desc_num = TOE_INTR_DESC_NUM; ++ ++ qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE; ++// intrq = (INTRQ_INFO_T*) &toe->intrq[0]; ++ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, qhdr++) ++ { ++ qhdr->word0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER; ++ qhdr->word1.bits32 = 0; ++ desc_ptr += TOE_INTR_DESC_NUM; ++ } ++} ++ ++#endif ++ ++/*---------------------------------------------------------------------- ++* toe_init_interrupt_config ++* Interrupt Select Registers are used to map interrupt to int0 or int1 ++* Int0 and int1 are wired to CPU 0/1 GMAC 0/1 ++* Interrupt Device Inteface data are used to pass device info to ++* upper device deiver or store status/statistics ++* ISR handler ++* (1) If status bit ON but masked, the prinf error message (bug issue) ++* (2) If select bits are for me, handle it, else skip to let ++* the other ISR handles it. ++* Notes: ++* GMACx init routine (for eCOS) or open routine (for Linux) ++* enable the interrupt bits only which are selected for him. ++* ++* Default Setting: ++* GMAC0 intr bits ------> int0 ----> eth0 ++* GMAC1 intr bits ------> int1 ----> eth1 ++* TOE intr -------------> int0 ----> eth0 ++* Classification Intr --> int0 ----> eth0 ++* Default Q0 -----------> int0 ----> eth0 ++* Default Q1 -----------> int1 ----> eth1 ++*----------------------------------------------------------------------*/ ++static void toe_init_interrupt_config(void) ++{ ++ // clear all status bits ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ ++ // Init select registers ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ ++ // disable all interrupt ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG); ++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_init_gmac ++*----------------------------------------------------------------------*/ ++static void toe_init_gmac(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ TOE_INFO_T *toe; ++ u32 data; ++ ++ if (!gmac_initialized) ++ return ; ++ ++ if (!tp->existed) ++ return; ++ ++ tp->dev = dev; ++ tp->flow_control_enable = 1; ++ tp->pre_phy_status = LINK_DOWN; ++ tp->full_duplex_status = tp->full_duplex_cfg; ++ tp->speed_status = tp->speed_status; ++ ++#if 0 ++ /* get mac address from FLASH */ ++ gmac_get_mac_address(); ++#endif ++ ++ /* set PHY register to start autonegition process */ ++ gmac_set_phy_status(dev); ++ ++ /* GMAC initialization */ ++ if ( toe_gmac_init_chip(dev) ) ++ { ++ printk ("GMAC %d init fail\n", tp->port_id); ++ } ++ ++ /* clear statistic counter */ ++ toe_gmac_clear_counter(dev); ++ ++ memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats)); ++ ++ /* ----------------------------------------------------------- ++ Enable GMAC interrupt & disable loopback ++ Notes: ++ GMACx init routine (for eCOS) or open routine (for Linux) ++ enable the interrupt bits only which are selected for him. ++ --------------------------------------------------------------*/ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ // Enable Interrupt Bits ++ if (tp->port_id == 0) ++ { ++ tp->intr0_selected = GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | ++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | ++ GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT | ++ GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT | ++ GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT | ++ GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT | ++ GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT | ++ GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT; ++ ++#ifdef GMAX_TX_INTR_DISABLED ++ tp->intr0_enabled = 0; ++#else ++ tp->intr0_enabled = GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT; ++#endif ++ ++ tp->intr1_selected = TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS | ++ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | ++ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT | ++ DEFAULT_Q0_INT_BIT; ++ tp->intr1_enabled = DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS; ++ tp->intr2_selected = 0xffffffff; // TOE Queue 32-63 FUUL Intr ++ tp->intr2_enabled = 0xffffffff; ++ tp->intr3_selected = 0xffffffff; // TOE Queue 0-31 FUUL Intr ++ tp->intr3_enabled = 0xffffffff; ++ tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS | ++ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT; ++ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT; ++ ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ } ++ else ++ { ++ tp->intr0_selected = GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | ++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT | ++ GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT | ++ GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT | ++ GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT | ++ GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT | ++ GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT | ++ GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT; ++#ifdef GMAX_TX_INTR_DISABLED ++ tp->intr0_enabled = 0; ++#else ++ tp->intr0_enabled = GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT; ++#endif ++ ++ tp->intr1_selected = DEFAULT_Q1_INT_BIT; ++ tp->intr1_enabled = DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS; ++ tp->intr2_selected = 0; // TOE Queue 32-63 FUUL Intr ++ tp->intr2_enabled = 0; ++ tp->intr3_selected = 0; // TOE Queue 0-31 FUUL Intr ++ tp->intr3_enabled = 0; ++ tp->intr4_selected = GMAC1_INT_BITS; ++ tp->intr4_enabled = GMAC1_INT_BITS; ++ ++ if (toe->gmac[0].existed != GMAC_EXISTED_FLAG) ++ { ++ tp->intr1_selected |= TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS | ++ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | ++ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT; ++ tp->intr1_enabled |= TOE_IQ_ALL_BITS; ++ tp->intr2_selected |= 0xffffffff; // TOE Queue 32-63 FUUL Intr ++ tp->intr2_enabled |= 0xffffffff; ++ tp->intr3_selected |= 0xffffffff; // TOE Queue 0-31 FUUL Intr ++ tp->intr3_enabled |= 0xffffffff; ++ tp->intr4_selected |= CLASS_RX_FULL_INT_BITS | ++ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT; ++ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT; ++ } ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); ++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected; ++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ } ++ ++ // enable only selected bits ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG, ++ tp->intr0_enabled, tp->intr0_selected); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG, ++ tp->intr1_enabled, tp->intr1_selected); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG, ++ tp->intr2_enabled, tp->intr2_selected); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG, ++ tp->intr3_enabled, tp->intr3_selected); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, ++ tp->intr4_enabled, tp->intr4_selected); ++ ++ /* start DMA process */ ++ toe_gmac_hw_start(dev); ++ ++ /* enable tx/rx register */ ++ toe_gmac_enable_tx_rx(dev); ++ ++// toe_gmac_enable_interrupt(tp->irq); ++ ++ return ; ++} ++ ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_sw_reset ++*----------------------------------------------------------------------*/ ++static void toe_gmac_sw_reset(void) ++{ ++ unsigned int reg_val; ++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060; /* GMAC0 S/W reset */ ++ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG); ++ udelay(100); ++ return; ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_init_chip ++*----------------------------------------------------------------------*/ ++static int toe_gmac_init_chip(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG2_T config2_val; ++ GMAC_CONFIG0_T config0,config0_mask; ++ GMAC_CONFIG1_T config1; ++ #ifdef CONFIG_SL351x_NAT ++ GMAC_CONFIG3_T config3_val; ++ #endif ++ GMAC_TX_WCR0_T hw_weigh; ++ GMAC_TX_WCR1_T sw_weigh; ++// GMAC_HASH_ENABLE_REG0_T hash_ctrl; ++// ++#if 0 /* mac address will be set in late_initcall */ ++ struct sockaddr sock; ++ // GMAC_AHB_WEIGHT_T ahb_weight, ahb_weight_mask; ++ ++ ++ /* set station MAC address1 and address2 */ ++ memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6); ++ gmac_set_mac_address(dev,(void *)&sock); ++#endif ++ ++ /* set RX_FLTR register to receive all multicast packet */ ++ gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f); ++ // gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f); ++ //gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f); ++ ++ /* set per packet buffer size */ ++ // config1.bits32 = 0x002004; //next version ++ /* set flow control threshold */ ++ config1.bits32 = 0; ++ config1.bits.set_threshold = 32 / 2; ++ config1.bits.rel_threshold = 32 / 4 * 3; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff); ++ ++ /* set flow control threshold */ ++ config2_val.bits32 = 0; ++ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2; ++ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff); ++ ++ #ifdef CONFIG_SL351x_NAT ++ /* set HW free queue flow control threshold */ ++ config3_val.bits32 = 0; ++ config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ; ++ config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff); ++ #endif ++ /* set_mcast_filter mask*/ ++ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff); ++ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff); ++ ++ /* disable TX/RX and disable internal loop back */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ ++ //debug_Aaron ++#ifdef L2_jumbo_frame ++ config0.bits.max_len = 5; ++#else ++ config0.bits.max_len = 2; ++#endif ++ ++ if (tp->flow_control_enable==1) ++ { ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ printk("Enable MAC Flow Control...\n"); ++ } ++ else ++ { ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ printk("Disable MAC Flow Control...\n"); ++ } ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ ++ config0.bits.rx_err_detect = 1; ++ config0.bits.rgmii_en = 0; ++ config0.bits.rgmm_edge = 1; ++ config0.bits.rxc_inv = 0; ++ config0.bits.ipv4_rx_chksum = 1; /* enable H/W to check ip checksum */ ++ config0.bits.ipv6_rx_chksum = 1; /* enable H/W to check ip checksum */ ++ config0.bits.port0_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM ++ config0.bits.port1_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM ++ config0.bits.port0_chk_toeq = 1; ++ config0.bits.port1_chk_toeq = 1; ++ config0.bits.port0_chk_classq = 1; ++ config0.bits.port1_chk_classq = 1; ++ ++ config0_mask.bits.max_len = 7; ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ config0_mask.bits.loop_back = 1; ++ config0_mask.bits.rgmii_en = 1; ++ config0_mask.bits.rgmm_edge = 1; ++ config0_mask.bits.rxc_inv = 1; ++ config0_mask.bits.ipv4_rx_chksum = 1; ++ config0_mask.bits.ipv6_rx_chksum = 1; ++ config0_mask.bits.port0_chk_hwq = 1; ++ config0_mask.bits.port1_chk_hwq = 1; ++ config0_mask.bits.port0_chk_toeq = 1; ++ config0_mask.bits.port1_chk_toeq = 1; ++ config0_mask.bits.port0_chk_classq = 1; ++ config0_mask.bits.port1_chk_classq = 1; ++ config0_mask.bits.rx_err_detect = 1; ++ ++ #if 0 ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ ++ config0.bits.txc_inv = 0; ++ config0.bits.rgmii_en = 0; ++ config0.bits.rgmm_edge = 1; ++ config0.bits.rxc_inv = 1; ++ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ ++ config0_mask.bits.max_len = 3; ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ config0_mask.bits.loop_back = 1; ++ config0_mask.bits.rgmii_en = 1; ++ config0_mask.bits.rgmm_edge = 1; ++ config0_mask.bits.txc_inv = 1; ++ config0_mask.bits.rxc_inv = 1; ++ config0_mask.bits.ipv4_tss_rx_en = 1; ++ config0_mask.bits.ipv6_tss_rx_en = 1; ++ #endif ++ ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32); ++ ++ #if 1 ++ hw_weigh.bits32 = 0; ++ hw_weigh.bits.hw_tq3 = 1; ++ hw_weigh.bits.hw_tq2 = 1; ++ hw_weigh.bits.hw_tq1 = 1; ++ hw_weigh.bits.hw_tq0 = 1; ++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff); ++ ++ sw_weigh.bits32 = 0; ++ sw_weigh.bits.sw_tq5 = 1; ++ sw_weigh.bits.sw_tq4 = 1; ++ sw_weigh.bits.sw_tq3 = 1; ++ sw_weigh.bits.sw_tq2 = 1; ++ sw_weigh.bits.sw_tq1 = 1; ++ sw_weigh.bits.sw_tq0 = 1; ++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff); ++ #endif ++ ++ #if 0 ++ ahb_weight.bits32 = 0; ++ ahb_weight_mask.bits32 = 0; ++ ahb_weight.bits.rx_weight = 1; ++ ahb_weight.bits.tx_weight = 1; ++ ahb_weight.bits.hash_weight = 1; ++ ahb_weight.bits.pre_req = 0x1f; ++ ahb_weight.bits.tqDV_threshold = 0; ++ ahb_weight_mask.bits.rx_weight = 0x1f; ++ ahb_weight_mask.bits.tx_weight = 0x1f; ++ ahb_weight_mask.bits.hash_weight = 0x1f; ++ ahb_weight_mask.bits.pre_req = 0x1f; ++ ahb_weight_mask.bits.tqDV_threshold = 0x1f; ++ gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32); ++ #endif ++ ++ #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE) ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff); ++ #endif ++ #ifdef CONFIG_SL351x_NAT ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff); ++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff); ++ ++ sl351x_nat_init(); ++ #endif ++ ++ #ifdef CONFIG_SL351x_RXTOE ++ /* setup matching rule to TOE */ ++ sl351x_toe_init(); ++ #endif ++ ++ // for A1 ASIC version ++// hash_ctrl.bits32 = 0; ++// hash_ctrl.bits.timing = 6; ++// gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff); ++ ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_enable_tx_rx ++*----------------------------------------------------------------------*/ ++static void toe_gmac_enable_tx_rx(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 0; /* enable rx */ ++ config0.bits.dis_tx = 0; /* enable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32); ++} ++/*---------------------------------------------------------------------- ++* toe_gmac_disable_rx ++*----------------------------------------------------------------------*/ ++#if 0 ++static void toe_gmac_disable_rx(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 1; /* disable rx */ ++// config0.bits.dis_tx = 1; /* disable tx */ ++ config0_mask.bits.dis_rx = 1; ++// config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32); ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_gmac_enable_rx ++*----------------------------------------------------------------------*/ ++#if 0 ++static void toe_gmac_enable_rx(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 0; /* enable rx */ ++// config0.bits.dis_tx = 0; /* enable tx */ ++ config0_mask.bits.dis_rx = 1; ++// config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32); ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_gmac_disable_tx_rx ++*----------------------------------------------------------------------*/ ++static void toe_gmac_disable_tx_rx(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_hw_start ++*----------------------------------------------------------------------*/ ++static void toe_gmac_hw_start(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ ++ ++ /* program dma control register */ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.rd_enable = 1; ++ dma_ctrl.bits.td_enable = 1; ++ dma_ctrl.bits.loopback = 0; ++ dma_ctrl.bits.drop_small_ack = 0; ++ dma_ctrl.bits.rd_prot = 0; ++ dma_ctrl.bits.rd_burst_size = 3; ++ dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES; ++ dma_ctrl.bits.rd_bus = 3; ++ dma_ctrl.bits.td_prot = 0; ++ dma_ctrl.bits.td_burst_size = 3; ++ dma_ctrl.bits.td_bus = 3; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.rd_enable = 1; ++ dma_ctrl_mask.bits.td_enable = 1; ++ dma_ctrl_mask.bits.loopback = 1; ++ dma_ctrl_mask.bits.drop_small_ack = 1; ++ dma_ctrl_mask.bits.rd_prot = 3; ++ dma_ctrl_mask.bits.rd_burst_size = 3; ++ dma_ctrl_mask.bits.rd_insert_bytes = 3; ++ dma_ctrl_mask.bits.rd_bus = 3; ++ dma_ctrl_mask.bits.td_prot = 0x0f; ++ dma_ctrl_mask.bits.td_burst_size = 3; ++ dma_ctrl_mask.bits.td_bus = 3; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++ ++ return; ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_hw_stop ++*----------------------------------------------------------------------*/ ++static void toe_gmac_hw_stop(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ ++ /* program dma control register */ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.rd_enable = 0; ++ dma_ctrl.bits.td_enable = 0; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.rd_enable = 1; ++ dma_ctrl_mask.bits.td_enable = 1; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_clear_counter ++*----------------------------------------------------------------------*/ ++static int toe_gmac_clear_counter (struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++ /* clear counter */ ++ gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS); ++ gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS); ++ gmac_read_reg(tp->base_addr, GMAC_IN_MCAST); ++ gmac_read_reg(tp->base_addr, GMAC_IN_BCAST); ++ gmac_read_reg(tp->base_addr, GMAC_IN_MAC1); ++ gmac_read_reg(tp->base_addr, GMAC_IN_MAC2); ++ tp->ifStatics.tx_bytes = 0; ++ tp->ifStatics.tx_packets = 0; ++ tp->ifStatics.tx_errors = 0; ++ tp->ifStatics.rx_bytes = 0; ++ tp->ifStatics.rx_packets = 0; ++ tp->ifStatics.rx_errors = 0; ++ tp->ifStatics.rx_dropped = 0; ++ return (0); ++} ++ ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_tx_complete ++*----------------------------------------------------------------------*/ ++static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, ++ struct net_device *dev, int interrupt) ++{ ++ volatile GMAC_TXDESC_T *curr_desc; ++ GMAC_TXDESC_0_T word0; ++ GMAC_TXDESC_1_T word1; ++ unsigned int desc_count; ++// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; ++ GMAC_SWTXQ_T *swtxq; ++ DMA_RWPTR_T rwptr; ++ ++ /* get tx H/W completed descriptor virtual address */ ++ /* check tx status and accumulate tx statistics */ ++ swtxq = &tp->swtxq[tx_qid]; ++ swtxq->intr_cnt++; ++ for (;;) ++ { ++ rwptr.bits32 = readl(swtxq->rwptr_reg); ++ if (rwptr.bits.rptr == swtxq->finished_idx) ++ break; ++ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; ++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE); ++ word0.bits32 = curr_desc->word0.bits32; ++ word1.bits32 = curr_desc->word1.bits32; ++ ++ if (word0.bits.status_tx_ok) ++ { ++ tp->ifStatics.tx_bytes += word1.bits.byte_count; ++ desc_count = word0.bits.desc_count; ++ if (desc_count==0) ++ { ++ printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count); ++ while(1); ++ } ++ while (--desc_count) ++ { ++ word0.bits.status_tx_ok = 0; ++ curr_desc->word0.bits32 = word0.bits32; ++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num); ++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; ++ word0.bits32 = curr_desc->word0.bits32; ++#ifdef _DUMP_TX_TCP_CONTENT ++ if (curr_desc->word0.bits.buffer_size < 16) ++ { ++ int a; ++ char *datap; ++ printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr); ++ datap = (char *)__va(curr_desc->word2.buf_adr); ++ for (a=0; a<8 && a<curr_desc->word0.bits.buffer_size; a++, datap++) ++ { ++ printk("0x%02x ", *datap); ++ } ++ printk("\n"); ++ } ++#endif ++ } ++ ++ word0.bits.status_tx_ok = 0; ++ if (swtxq->tx_skb[swtxq->finished_idx]) ++ { ++ if (interrupt) ++ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]); ++ else ++ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]); ++ swtxq->tx_skb[swtxq->finished_idx] = NULL; ++ } ++ curr_desc->word0.bits32 = word0.bits32; ++ swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc; ++ swtxq->total_finished++; ++ tp->ifStatics.tx_packets++; ++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num); ++ } ++ else ++ { ++ // tp->ifStatics.tx_errors++; ++ // printk("%s::Tx Descriptor is !!!\n",__func__); ++ // wait ready by breaking ++ break; ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_start_xmit ++*----------------------------------------------------------------------*/ ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ GMAC_INFO_T *tp= dev->priv; ++// static unsigned int pcount = 0; ++// unsigned int tx_qid; ++ DMA_RWPTR_T rwptr; ++ volatile GMAC_TXDESC_T *curr_desc; ++ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */ ++ int frag_id = 0; ++ int len, total_len = skb->len; ++ struct net_device_stats *isPtr; ++ unsigned int free_desc; ++ GMAC_SWTXQ_T *swtxq; ++ register unsigned long word0, word1, word2, word3; ++ unsigned short wptr, rptr; ++#ifdef L2_jumbo_frame ++ int header_len = skb->len; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ int tcp_hdr_len; ++ unsigned char *ptr; ++ int data_len,a; ++ unsigned int val; ++#endif ++ ++#ifdef GMAC_LEN_1_2_ISSUE ++ int total_pages; ++ total_pages = snd_pages; ++#endif ++ ++ isPtr = (struct net_device_stats *)&tp->ifStatics; ++#if 1 ++ if (skb->len >= 0x10000) ++ { ++// spin_unlock(&tp->tx_mutex); ++ isPtr->tx_dropped++; ++ printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len); ++ netif_stop_queue(dev); ++ return 1; ++ } ++#endif ++ ++#if 0 ++ if (storlink_ctl.recvfile==2) ++ { ++ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len); ++ } ++#endif ++ ++#ifdef GMAC_USE_TXQ0 ++ #define tx_qid 0 ++#endif ++ ++ swtxq = &tp->swtxq[tx_qid]; ++ ++// spin_lock(&tp->tx_mutex); ++ rwptr.bits32 = readl(swtxq->rwptr_reg); ++ wptr = rwptr.bits.wptr; ++ rptr = rwptr.bits.rptr; ++ ++ // check finished desc or empty BD ++ // cannot check by read ptr of RW PTR register, ++ // because the HW complete to send but the SW may NOT handle it ++#ifndef GMAX_TX_INTR_DISABLED ++ if (wptr >= swtxq->finished_idx) ++ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx; ++ else ++ free_desc = swtxq->finished_idx - wptr - 1; ++ ++ if (free_desc < snd_pages) ++ { ++// spin_unlock(&tp->tx_mutex); ++ isPtr->tx_dropped++; ++// printk("GMAC %d No available descriptor!\n", tp->port_id); ++ netif_stop_queue(dev); ++ return 1; ++ } ++#else ++ toe_gmac_tx_complete(tp, tx_qid, dev, 0); ++ ++ if (wptr >= swtxq->finished_idx) ++ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx; ++ else ++ free_desc = swtxq->finished_idx - wptr - 1; ++ if (free_desc < snd_pages) ++ { ++// spin_unlock(&tp->tx_mutex); ++ isPtr->tx_dropped++; ++// printk("GMAC %d No available descriptor!\n", tp->port_id); ++ netif_stop_queue(dev); ++ return 1; ++ } ++ ++#if 0 ++ printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx); ++ if ((free_desc < (snd_pages << 2)) || ++ (free_desc < (swtxq->total_desc_num >> 2))) ++ { ++ printk("2: free_desc = %d\n", free_desc); ++ toe_gmac_tx_complete(tp, tx_qid, dev, 0); ++ rwptr.bits32 = readl(swtxq->rwptr_reg); ++ wptr = rwptr.bits.wptr; ++ if (wptr>= swtxq->finished_idx) ++ free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx; ++ else ++ free_desc = swtxq->finished_idx - wptr - 1; ++ } ++#endif ++#endif ++ ++#ifdef L2_jumbo_frame ++// data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len; ++// if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP)) ++// if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP))) ++ if (((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP)) ++ { ++ ip_hdr = (struct iphdr*)(skb->nh.iph); ++ tcp_hdr = (struct tcphdr*)(skb->h.th); ++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4; ++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4; ++ ++ if ((skb->h.th->syn) && (tcp_hdr_len > 20)) ++ { ++ ptr = (unsigned char *)(tcp_hdr+1); ++ if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962 ,0x07ba=2032-54=1978 ++ { ++ ptr[2]=0x20; //23 ++ ptr[3]=0x00; //00 ++ printk("-----> Change MSS to 8K \n" ); ++ } ++ } ++ } ++// if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP) ++// if ((tcp_hdr_len > 20) && (skb->h.th->syn)) ++#endif ++ ++ ++#if 0 ++ if (snd_pages > 1) ++ printk("-----> snd_pages=%d\n", snd_pages); ++ if (total_len > 1514) ++ { ++ printk("-----> total_len=%d\n", total_len); ++ } ++#endif ++ ++ while (snd_pages) ++ { ++ char *pkt_datap; ++ ++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr; ++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE); ++#if 0 ++//#if (GMAC_DEBUG==1) ++ // if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it ++ // if (curr_desc->word2.buf_adr) ++ if (swtxq->tx_skb[wptr]) ++ { ++ printk("Error! Stop due to TX descriptor's buffer is not freed!\n"); ++ while(1); ++ dev_kfree_skb(swtxq->tx_skb[wptr]); ++ swtxq->tx_skb[wptr] = NULL; ++ } ++#endif ++ ++ if (frag_id == 0) ++ { ++#if 0 ++ int i; ++ pkt_datap = skb->data; ++ len = total_len; ++ for (i=0; i<skb_shinfo(skb)->nr_frags; i++) ++ { ++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i]; ++ len -= frag->size; ++ } ++#else ++ pkt_datap = skb->data; ++ len = total_len - skb->data_len; ++#endif ++ } ++ else ++ { ++ skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1]; ++ pkt_datap = page_address(frag->page) + frag->page_offset; ++ len = frag->size; ++ if (len > total_len) ++ { ++ printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n", ++ len, total_len); ++ } ++ } ++ ++ /* set TX descriptor */ ++ /* copy packet to descriptor buffer address */ ++ // curr_desc->word0.bits32 = len; /* total frame byte count */ ++ word0 = len; ++#ifdef L2_jumbo_frame ++ word3 = (dev->mtu+14) | EOFIE_BIT; //2016 ,2032 ++#else ++ word3 = 1514 | EOFIE_BIT; ++#endif ++ ++#ifdef DO_HW_CHKSUM ++#ifdef L2_jumbo_frame ++ if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff))) ++#else ++ if (total_len <= 1514 && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff))) ++#endif ++ word1 = total_len | ++ TSS_IP_CHKSUM_BIT | ++ TSS_IPV6_ENABLE_BIT | ++ TSS_MTU_ENABLE_BIT; ++ else ++ word1 = total_len | ++ TSS_UDP_CHKSUM_BIT | ++ TSS_TCP_CHKSUM_BIT | ++ TSS_IP_CHKSUM_BIT | ++ TSS_IPV6_ENABLE_BIT | ++ TSS_MTU_ENABLE_BIT; ++#else ++ word1 = total_len | TSS_MTU_ENABLE_BIT; ++#endif ++ word2 = (unsigned long)__pa(pkt_datap); ++ ++ if (frag_id == 0) ++ { ++ word3 |= SOF_BIT; // SOF ++ } ++ ++ if (snd_pages == 1) ++ { ++ word3 |= EOF_BIT; // EOF ++ swtxq->tx_skb[wptr] = skb; ++#ifdef CONFIG_SL351x_NAT ++ if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id)) ++ word1 |= TSS_IP_FIXED_LEN_BIT; ++#endif ++ } ++ else ++ swtxq->tx_skb[wptr] = NULL; ++ // word1 |= TSS_IP_FIXED_LEN_BIT; ++#if 1 ++#ifdef CONFIG_SL351x_RXTOE ++ // check if this frame has the mission to enable toe hash entry.. ++ // if rx_max_pktsize ==0, do not enable RXTOE ++ if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) { ++ set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev); ++ } ++#endif ++#endif ++#ifdef _DUMP_TX_TCP_CONTENT ++ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139))) ++ { ++ int a; ++ char *datap; ++ printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap); ++ datap = (char *)pkt_datap; ++ for (a=0; a<8 && a<len; a++, datap++) ++ { ++ printk("0x%02x ", *datap); ++ } ++ printk("\n"); ++ } ++#endif ++ ++#ifdef GMAC_LEN_1_2_ISSUE ++ if ((total_pages!=snd_pages) && (len == 1 || len == 2 ) && ((u32)pkt_datap & 0x03)) ++ { ++ memcpy((void *)&_debug_prefetch_buf[_debug_prefetch_cnt][0], pkt_datap, len); ++ pkt_datap = (char *)&_debug_prefetch_buf[_debug_prefetch_cnt][0]; ++ word2 = (unsigned long)__pa(pkt_datap); ++ _debug_prefetch_cnt++; ++ if (_debug_prefetch_cnt >= _DEBUG_PREFETCH_NUM) ++ _debug_prefetch_cnt = 0; ++ } ++#endif ++ ++ consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE); ++ wmb(); ++ curr_desc->word0.bits32 = word0; ++ curr_desc->word1.bits32 = word1; ++ curr_desc->word2.bits32 = word2; ++ curr_desc->word3.bits32 = word3; ++ swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc; ++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE); ++#ifdef _DUMP_TX_TCP_CONTENT ++ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139))) ++ { ++ int a; ++ char *datap; ++ printk("\t 0x%08x: ", (u32)pkt_datap); ++ datap = (char *)pkt_datap; ++ for (a=0; a<8 && a<len; a++, datap++) ++ { ++ printk("0x%02x ", *datap); ++ } ++ printk("\n"); ++ } ++#endif ++ free_desc--; ++ wmb(); ++ wptr = RWPTR_ADVANCE_ONE(wptr, swtxq->total_desc_num); ++ frag_id++; ++ snd_pages--; ++ } ++ ++ swtxq->total_sent++; ++ SET_WPTR(swtxq->rwptr_reg, wptr); ++ dev->trans_start = jiffies; ++ ++ ++ // printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc); ++//#ifdef GMAX_TX_INTR_DISABLED ++// toe_gmac_tx_complete(tp, tx_qid, dev, 0); ++//#endif ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_set_mac_address ++*----------------------------------------------------------------------*/ ++ ++static int gmac_set_mac_address(struct net_device *dev, void *addr) ++{ ++ GMAC_INFO_T *tp= dev->priv; ++ struct sockaddr *sock; ++ unsigned int reg_val; ++ unsigned int i; ++ ++ sock = (struct sockaddr *) addr; ++ for (i = 0; i < 6; i++) ++ { ++ dev->dev_addr[i] = sock->sa_data[i]; ++ } ++ ++ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24); ++ gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff); ++ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8); ++ gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff); ++ memcpy(ð_mac[tp->port_id][0],&dev->dev_addr[0],6); ++ ++ printk("Storlink %s address = ",dev->name); ++ printk("%02x",dev->dev_addr[0]); ++ printk("%02x",dev->dev_addr[1]); ++ printk("%02x",dev->dev_addr[2]); ++ printk("%02x",dev->dev_addr[3]); ++ printk("%02x",dev->dev_addr[4]); ++ printk("%02x\n",dev->dev_addr[5]); ++ ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_get_mac_address ++* get mac address from FLASH ++*----------------------------------------------------------------------*/ ++static void gmac_get_mac_address(void) ++{ ++#ifdef CONFIG_MTD ++ extern int get_vlaninfo(vlaninfo* vlan); ++ static vlaninfo vlan[2]; ++ ++ if (get_vlaninfo(&vlan[0])) ++ { ++ memcpy((void *)ð_mac[0][0],vlan[0].mac,6); ++ // VLAN_conf[0].vid = vlan[0].vlanid; ++ // VLAN_conf[0].portmap = vlan[0].vlanmap; ++ memcpy((void *)ð_mac[1][0],vlan[1].mac,6); ++ // VLAN_conf[1].vid = vlan[1].vlanid; ++ // VLAN_conf[1].portmap = vlan[1].vlanmap; ++ } ++#else ++ unsigned int reg_val; ++ ++ reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac); ++ eth_mac[0][4] = (reg_val & 0xff00) >> 8; ++ eth_mac[0][5] = reg_val & 0x00ff; ++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); ++ eth_mac[1][4] = (reg_val & 0xff00) >> 8; ++ eth_mac[1][5] = reg_val & 0x00ff; ++#endif ++ return; ++} ++ ++ ++/*---------------------------------------------------------------------- ++* mac_stop_txdma ++*----------------------------------------------------------------------*/ ++void mac_stop_txdma(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++ ++ // wait idle ++ do ++ { ++ txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG); ++ } while (txdma_busy.bits.td_busy); ++ ++ /* program dma control register */ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.rd_enable = 0; ++ dma_ctrl.bits.td_enable = 0; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.rd_enable = 1; ++ dma_ctrl_mask.bits.td_enable = 1; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++} ++ ++/*---------------------------------------------------------------------- ++* mac_start_txdma ++*----------------------------------------------------------------------*/ ++void mac_start_txdma(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ ++ /* program dma control register */ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.rd_enable = 1; ++ dma_ctrl.bits.td_enable = 1; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.rd_enable = 1; ++ dma_ctrl_mask.bits.td_enable = 1; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++} ++ ++ ++/*---------------------------------------------------------------------- ++* gmac_get_stats ++*----------------------------------------------------------------------*/ ++ ++struct net_device_stats * gmac_get_stats(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ // unsigned int flags; ++ unsigned int pkt_drop; ++ unsigned int pkt_error; ++ ++ if (netif_running(dev)) ++ { ++ /* read H/W counter */ ++ // spin_lock_irqsave(&tp->lock,flags); ++ pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS); ++ pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS); ++ tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop; ++ tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error; ++ // spin_unlock_irqrestore(&tp->lock,flags); ++ } ++ return &tp->ifStatics; ++} ++ ++ ++ ++/*---------------------------------------------------------------------- ++* mac_get_sw_tx_weight ++*----------------------------------------------------------------------*/ ++void mac_get_sw_tx_weight(struct net_device *dev, char *weight) ++{ ++ GMAC_TX_WCR1_T sw_weigh; ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++ sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG); ++ ++ weight[0] = sw_weigh.bits.sw_tq0; ++ weight[1] = sw_weigh.bits.sw_tq1; ++ weight[2] = sw_weigh.bits.sw_tq2; ++ weight[3] = sw_weigh.bits.sw_tq3; ++ weight[4] = sw_weigh.bits.sw_tq4; ++ weight[5] = sw_weigh.bits.sw_tq5; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_sw_tx_weight ++*----------------------------------------------------------------------*/ ++void mac_set_sw_tx_weight(struct net_device *dev, char *weight) ++{ ++ GMAC_TX_WCR1_T sw_weigh; ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++ sw_weigh.bits32 = 0; ++ sw_weigh.bits.sw_tq0 = weight[0]; ++ sw_weigh.bits.sw_tq1 = weight[1]; ++ sw_weigh.bits.sw_tq2 = weight[2]; ++ sw_weigh.bits.sw_tq3 = weight[3]; ++ sw_weigh.bits.sw_tq4 = weight[4]; ++ sw_weigh.bits.sw_tq5 = weight[5]; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff); ++} ++ ++/*---------------------------------------------------------------------- ++* mac_get_hw_tx_weight ++*----------------------------------------------------------------------*/ ++void mac_get_hw_tx_weight(struct net_device *dev, char *weight) ++{ ++ GMAC_TX_WCR0_T hw_weigh; ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++ hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG); ++ ++ weight[0] = hw_weigh.bits.hw_tq0; ++ weight[1] = hw_weigh.bits.hw_tq1; ++ weight[2] = hw_weigh.bits.hw_tq2; ++ weight[3] = hw_weigh.bits.hw_tq3; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_hw_tx_weight ++*----------------------------------------------------------------------*/ ++void mac_set_hw_tx_weight(struct net_device *dev, char *weight) ++{ ++ GMAC_TX_WCR0_T hw_weigh; ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++ hw_weigh.bits32 = 0; ++ hw_weigh.bits.hw_tq0 = weight[0]; ++ hw_weigh.bits.hw_tq1 = weight[1]; ++ hw_weigh.bits.hw_tq2 = weight[2]; ++ hw_weigh.bits.hw_tq3 = weight[3]; ++ ++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff); ++} ++ ++/*---------------------------------------------------------------------- ++* mac_start_tx_dma ++*----------------------------------------------------------------------*/ ++int mac_start_tx_dma(int mac) ++{ ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.td_enable = 1; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.td_enable = 1; ++ ++ if (mac == 0) ++ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++ else ++ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++ return 1; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_stop_tx_dma ++*----------------------------------------------------------------------*/ ++int mac_stop_tx_dma(int mac) ++{ ++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask; ++ ++ dma_ctrl.bits32 = 0; ++ dma_ctrl.bits.td_enable = 0; ++ ++ dma_ctrl_mask.bits32 = 0; ++ dma_ctrl_mask.bits.td_enable = 1; ++ ++ if (mac == 0) ++ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++ else ++ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32); ++ return 1; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_read_reg(int mac, unsigned int offset) ++*----------------------------------------------------------------------*/ ++unsigned int mac_read_reg(int mac, unsigned int offset) ++{ ++ switch (mac) ++ { ++ case 0: ++ return gmac_read_reg(TOE_GMAC0_BASE, offset); ++ case 1: ++ return gmac_read_reg(TOE_GMAC1_BASE, offset); ++ default: ++ return 0; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* mac_write_reg ++*----------------------------------------------------------------------*/ ++void mac_write_reg(int mac, unsigned int offset, unsigned data) ++{ ++ switch (mac) ++ { ++ case 0: ++ gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff); ++ break; ++ case 1: ++ gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff); ++ break; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* mac_read_dma_reg(int mac, unsigned int offset) ++*----------------------------------------------------------------------*/ ++u32 mac_read_dma_reg(int mac, unsigned int offset) ++{ ++ switch (mac) ++ { ++ case 0: ++ return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset); ++ case 1: ++ return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset); ++ default: ++ return 0; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* mac_write_dma_reg ++*----------------------------------------------------------------------*/ ++void mac_write_dma_reg(int mac, unsigned int offset, u32 data) ++{ ++ switch (mac) ++ { ++ case 0: ++ gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff); ++ break; ++ case 1: ++ gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff); ++ break; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* ether_crc ++*----------------------------------------------------------------------*/ ++static unsigned const ethernet_polynomial = 0x04c11db7U; ++static unsigned int ether_crc (int length, unsigned char *data) ++{ ++ int crc = -1; ++ unsigned int i; ++ unsigned int crc_val=0; ++ ++ while (--length >= 0) { ++ unsigned char current_octet = *data++; ++ int bit; ++ for (bit = 0; bit < 8; bit++, current_octet >>= 1) ++ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ++ ethernet_polynomial : 0); ++ } ++ crc = ~crc; ++ for (i=0;i<32;i++) ++ { ++ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i)); ++ } ++ return crc_val; ++} ++ ++ ++ ++/*---------------------------------------------------------------------- ++* mac_set_rx_mode ++*----------------------------------------------------------------------*/ ++void mac_set_rx_mode(int pid, unsigned int data) ++{ ++ unsigned int base; ++ ++ base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE; ++ ++ gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f); ++ return; ++} ++ ++ ++/*---------------------------------------------------------------------- ++* gmac_open ++*----------------------------------------------------------------------*/ ++ ++static int gmac_open (struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ int retval; ++ TOE_INFO_T *toe; ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ /* hook ISR */ ++ retval = request_irq (dev->irq, toe_gmac_interrupt, SA_INTERRUPT, dev->name, dev); ++ if (retval) ++ return retval; ++ ++ toe_init_gmac(dev); ++ ++ if(!FLAG_SWITCH) ++ { ++ init_waitqueue_head (&tp->thr_wait); ++ init_completion(&tp->thr_exited); ++ ++ tp->time_to_die = 0; ++ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES); ++ if (tp->thr_pid < 0) ++ { ++ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name); ++ } ++ } ++ ++ tp->operation = 1; ++ ++ netif_start_queue (dev); ++ ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_close ++*----------------------------------------------------------------------*/ ++static int gmac_close(struct net_device *dev) ++{ ++ TOE_INFO_T *toe; ++// GMAC_RXDESC_T *sw_desc_ptr,*desc_ptr; ++// unsigned int buf_ptr; ++ GMAC_INFO_T *tp = dev->priv; ++ unsigned int ret; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ tp->operation = 0; ++ ++ netif_stop_queue(dev); ++ mdelay(20); ++ ++ /* stop tx/rx packet */ ++ toe_gmac_disable_tx_rx(dev); ++ mdelay(20); ++ ++ /* stop the chip's Tx and Rx DMA processes */ ++ toe_gmac_hw_stop(dev); ++ ++ toe_gmac_disable_interrupt(tp->irq); ++ ++ /* disable interrupts by clearing the interrupt mask */ ++ synchronize_irq(); ++ free_irq(dev->irq,dev); ++ ++// DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma); ++// DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma); ++// DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma); ++// DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma); ++// DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma); ++// DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma); ++// DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma); ++// DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma); ++// DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma); ++// DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma); ++// DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma); ++ ++ if(!FLAG_SWITCH) ++ { ++ if (tp->thr_pid >= 0) ++ { ++ tp->time_to_die = 1; ++ wmb(); ++ ret = kill_proc (tp->thr_pid, SIGTERM, 1); ++ if (ret) ++ { ++ printk (KERN_ERR "%s: unable to signal thread\n", dev->name); ++ return ret; ++ } ++// wait_for_completion (&tp->thr_exited); ++ } ++ } ++ ++ return (0); ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_fill_free_q ++* allocate buffers for free queue. ++*----------------------------------------------------------------------*/ ++static inline void toe_gmac_fill_free_q(void) ++{ ++ struct sk_buff *skb; ++ volatile DMA_RWPTR_T fq_rwptr; ++ volatile GMAC_RXDESC_T *fq_desc; ++ unsigned long flags; ++ // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1; ++ ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ spin_lock_irqsave(&gmac_fq_lock, flags); ++ //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, ++ // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) { ++ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, ++ TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) { ++ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) { ++ printk("%s::skb allocation fail!\n", __func__); ++ //while(1); ++ break; ++ } ++ REG32(skb->data) = (unsigned int)skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); ++ // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, ++ TOE_SW_FREEQ_DESC_NUM); ++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr; ++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); ++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); ++ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32; ++ } ++ spin_unlock_irqrestore(&gmac_fq_lock, flags); ++} ++// EXPORT_SYMBOL(toe_gmac_fill_free_q); ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_interrupt ++*----------------------------------------------------------------------*/ ++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ++{ ++ struct net_device *dev = (struct net_device *)dev_instance; ++ TOE_INFO_T *toe; ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ unsigned int status0; ++ unsigned int status1; ++ unsigned int status2; ++ unsigned int status3; ++ unsigned int status4; ++ ++// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; ++ toe = (TOE_INFO_T *)&toe_private_data; ++// handle NAPI ++#ifdef CONFIG_SL_NAPI ++if (storlink_ctl.pauseoff == 1) ++{ ++/* disable GMAC interrupt */ ++ //toe_gmac_disable_interrupt(tp->irq); ++ ++// isPtr->interrupts++; ++ /* read Interrupt status */ ++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); ++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ // prompt warning if status bit ON but not enabled ++#if 0 ++ if (status0 & ~tp->intr0_enabled) ++ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n", ++ status0, tp->intr0_enabled); ++ if (status1 & ~tp->intr1_enabled) ++ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n", ++ status1, tp->intr1_enabled); ++ if (status2 & ~tp->intr2_enabled) ++ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n", ++ status2, tp->intr2_enabled); ++ if (status3 & ~tp->intr3_enabled) ++ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n", ++ status3, tp->intr3_enabled); ++ if (status4 & ~tp->intr4_enabled) ++ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n", ++ status4, tp->intr4_enabled); ++#endif ++ ++ if (status0) ++ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG); ++ if (status1) ++ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG); ++ if (status2) ++ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG); ++ if (status3) ++ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG); ++ if (status4) ++ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++#if 0 ++ /* handle freeq interrupt first */ ++ if (status4 & tp->intr4_enabled) { ++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) ++ { ++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, ++ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); ++ ++ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev)) ++ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]); ++ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev)) ++ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]); ++ printk("\nfreeq int\n"); ++ toe_gmac_fill_free_q(); ++ tp->sw_fq_empty_cnt++; ++ ++ } ++ } ++#endif ++ // Interrupt Status 1 ++ if (status1 & tp->intr1_enabled) ++ { ++ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT) ++ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT) ++ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events ++ // Only count ++ // TOE, Classification, and default queues interrupts are handled by ISR ++ // because they should pass packets to upper layer ++ if (tp->port_id == 0) ++ { ++ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) ++ { ++ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT) ++ tp->hwtxq[3].eof_cnt++; ++ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT) ++ tp->hwtxq[2].eof_cnt++; ++ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT) ++ tp->hwtxq[1].eof_cnt++; ++ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT) ++ tp->hwtxq[0].eof_cnt++; ++ } ++ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT)) ++ { ++ if (likely(netif_rx_schedule_prep(dev))) ++ { ++ unsigned int data32; ++ // disable GMAC-0 rx interrupt ++ // class-Q & TOE-Q are implemented in future ++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //data32 &= ~DEFAULT_Q0_INT_BIT; ++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__); ++ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //tp->total_q_cnt_napi=0; ++ //rx_time = jiffies; ++ //rx_old_bytes = isPtr->rx_bytes; ++ __netif_rx_schedule(dev); ++ } ++ } ++ } ++ else if (tp->port_id == 1) ++ { ++ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS)) ++ { ++ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT) ++ tp->hwtxq[3].eof_cnt++; ++ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT) ++ tp->hwtxq[2].eof_cnt++; ++ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT) ++ tp->hwtxq[1].eof_cnt++; ++ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT) ++ tp->hwtxq[0].eof_cnt++; ++ } ++ ++ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) ++ { ++ if (likely(netif_rx_schedule_prep(dev))) ++ { ++ unsigned int data32; ++ // disable GMAC-0 rx interrupt ++ // class-Q & TOE-Q are implemented in future ++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //data32 &= ~DEFAULT_Q1_INT_BIT; ++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__); ++ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //tp->total_q_cnt_napi=0; ++ //rx_time = jiffies; ++ //rx_old_bytes = isPtr->rx_bytes; ++ __netif_rx_schedule(dev); ++ } ++ } ++ } ++ } ++ ++ // Interrupt Status 0 ++ if (status0 & tp->intr0_enabled) ++ { ++ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \ ++ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \ ++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \ ++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT) ++ ++ if (status0 & ERR_INTR_BITS) ++ { ++ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT)) ++ { ++ tp->txDerr_cnt[0]++; ++ printk("GMAC0 TX AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT)) ++ { ++ tp->txPerr_cnt[0]++; ++ printk("GMAC0 Tx Descriptor Protocol Error!\n"); ++ } ++ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT)) ++ { ++ tp->txDerr_cnt[1]++; ++ printk("GMAC1 Tx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT)) ++ { ++ tp->txPerr_cnt[1]++; ++ printk("GMAC1 Tx Descriptor Protocol Error!\n"); ++ } ++ ++ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT)) ++ { ++ tp->RxDerr_cnt[0]++; ++ printk("GMAC0 Rx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT)) ++ { ++ tp->RxPerr_cnt[0]++; ++ printk("GMAC0 Rx Descriptor Protocol Error!\n"); ++ } ++ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT)) ++ { ++ tp->RxDerr_cnt[1]++; ++ printk("GMAC1 Rx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT)) ++ { ++ tp->RxPerr_cnt[1]++; ++ printk("GMAC1 Rx Descriptor Protocol Error!\n"); ++ } ++ } ++ ++#ifndef GMAX_TX_INTR_DISABLED ++ if (tp->port_id == 1 && netif_running(dev) && ++ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT)) ++ || ++ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT)))) ++ { ++ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1); ++ } ++ ++ if (tp->port_id == 0 && netif_running(dev) && ++ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT)) ++ || ++ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT)))) ++ { ++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1); ++ } ++#endif ++ } ++ // Interrupt Status 4 ++ if (status4 & tp->intr4_enabled) ++ { ++ #define G1_INTR4_BITS (0xff000000) ++ #define G0_INTR4_BITS (0x00ff0000) ++ ++ if (tp->port_id == 0) ++ { ++ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS)) ++ { ++ if (status4 & GMAC0_RESERVED_INT_BIT) ++ printk("GMAC0_RESERVED_INT_BIT is ON\n"); ++ if (status4 & GMAC0_MIB_INT_BIT) ++ tp->mib_full_cnt++; ++ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT) ++ tp->rx_pause_on_cnt++; ++ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT) ++ tp->tx_pause_on_cnt++; ++ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT) ++ tp->rx_pause_off_cnt++; ++ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT) ++ tp->rx_pause_off_cnt++; ++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT) ++ tp->rx_overrun_cnt++; ++ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT) ++ tp->status_changed_cnt++; ++ } ++ } ++ else if (tp->port_id == 1) ++ { ++ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS)) ++ { ++ if (status4 & GMAC1_RESERVED_INT_BIT) ++ printk("GMAC1_RESERVED_INT_BIT is ON\n"); ++ if (status4 & GMAC1_MIB_INT_BIT) ++ tp->mib_full_cnt++; ++ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT) ++ { ++ printk("Gmac pause on\n"); ++ tp->rx_pause_on_cnt++; ++ } ++ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT) ++ { ++ printk("Gmac pause on\n"); ++ tp->tx_pause_on_cnt++; ++ } ++ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT) ++ { ++ printk("Gmac pause off\n"); ++ tp->rx_pause_off_cnt++; ++ } ++ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT) ++ { ++ printk("Gmac pause off\n"); ++ tp->rx_pause_off_cnt++; ++ } ++ if (status4 & GMAC1_RX_OVERRUN_INT_BIT) ++ { ++ //printk("Gmac Rx Overrun \n"); ++ tp->rx_overrun_cnt++; ++ } ++ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT) ++ tp->status_changed_cnt++; ++ } ++ } ++ } ++ ++ //toe_gmac_enable_interrupt(tp->irq); ++#ifdef IxscriptMate_1518 ++ if (storlink_ctl.pauseoff == 1) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++#endif ++// enable_irq(gmac_irq[dev_index]); ++ //printk("gmac_interrupt complete!\n\n"); ++// return IRQ_RETVAL(handled); ++ return IRQ_RETVAL(1); ++} ++else ++{ ++#endif //endif NAPI ++ ++ ++ /* disable GMAC interrupt */ ++ toe_gmac_disable_interrupt(tp->irq); ++ ++// isPtr->interrupts++; ++ /* read Interrupt status */ ++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); ++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ // prompt warning if status bit ON but not enabled ++#if 0 ++ if (status0 & ~tp->intr0_enabled) ++ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n", ++ status0, tp->intr0_enabled); ++ if (status1 & ~tp->intr1_enabled) ++ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n", ++ status1, tp->intr1_enabled); ++ if (status2 & ~tp->intr2_enabled) ++ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n", ++ status2, tp->intr2_enabled); ++ if (status3 & ~tp->intr3_enabled) ++ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n", ++ status3, tp->intr3_enabled); ++ if (status4 & ~tp->intr4_enabled) ++ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n", ++ status4, tp->intr4_enabled); ++#endif ++#define INTERRUPT_SELECT 1 ++ if (status0) ++ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG); ++ if (status1) ++ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG); ++ if (status2) ++ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG); ++ if (status3) ++ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG); ++ if (status4) ++ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ ++ /* handle freeq interrupt first */ ++ if (status4 & tp->intr4_enabled) { ++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) ++ { ++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, ++ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); ++ ++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, ++ // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); ++ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev)) ++ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]); ++ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev)) ++ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]); ++ printk("\nfreeq int\n"); ++ toe_gmac_fill_free_q(); ++ tp->sw_fq_empty_cnt++; ++ ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, ++ SWFQ_EMPTY_INT_BIT); ++ } ++ } ++ ++ // Interrupt Status 1 ++ if (status1 & tp->intr1_enabled) ++ { ++ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT) ++ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT) ++ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events ++ // Only count ++ // TOE, Classification, and default queues interrupts are handled by ISR ++ // because they should pass packets to upper layer ++ if (tp->port_id == 0) ++ { ++#ifndef INTERRUPT_SELECT ++ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) ++ { ++ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT) ++ tp->hwtxq[3].eof_cnt++; ++ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT) ++ tp->hwtxq[2].eof_cnt++; ++ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT) ++ tp->hwtxq[1].eof_cnt++; ++ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT) ++ tp->hwtxq[0].eof_cnt++; ++#endif //INTERRUPT_SELECT ++#ifndef INTERRUPT_SELECT ++ } ++#endif //INTERRUPT_SELECT ++ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT)) ++ { ++ tp->default_q_intr_cnt++; ++ toe_gmac_handle_default_rxq(dev, tp); ++ } ++#ifdef CONFIG_SL351x_RXTOE ++ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) && ++ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) { ++ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected); ++ toe_gmac_handle_toeq(dev, tp, status1); ++ //toe_gmac_handle_toeq(dev, toe, tp, status1); ++ } ++#endif ++ } ++ else if (tp->port_id == 1) ++ { ++#ifndef INTERRUPT_SELECT ++ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS)) ++ { ++ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT) ++ tp->hwtxq[3].eof_cnt++; ++ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT) ++ tp->hwtxq[2].eof_cnt++; ++ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT) ++ tp->hwtxq[1].eof_cnt++; ++ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT) ++ tp->hwtxq[0].eof_cnt++; ++#endif //INTERRUPT_SELECT ++#ifndef INTERRUPT_SELECT ++ } ++#endif //INTERRUPT_SELECT ++ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) ++ { ++ tp->default_q_intr_cnt++; ++ toe_gmac_handle_default_rxq(dev, tp); ++ } ++#ifdef CONFIG_SL351x_RXTOE ++ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) && ++ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) { ++ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected); ++ toe_gmac_handle_toeq(dev, tp, status1); ++ //toe_gmac_handle_toeq(dev, toe, tp, status1); ++ } ++#endif ++ } ++ } ++ ++ ++ // Interrupt Status 0 ++ if (status0 & tp->intr0_enabled) ++ { ++ ++ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \ ++ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \ ++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \ ++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT) ++#ifndef INTERRUPT_SELECT ++ if (status0 & ERR_INTR_BITS) ++ { ++ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT)) ++ { ++ tp->txDerr_cnt[0]++; ++ printk("GMAC0 TX AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT)) ++ { ++ tp->txPerr_cnt[0]++; ++ printk("GMAC0 Tx Descriptor Protocol Error!\n"); ++ } ++ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT)) ++ { ++ tp->txDerr_cnt[1]++; ++ printk("GMAC1 Tx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT)) ++ { ++ tp->txPerr_cnt[1]++; ++ printk("GMAC1 Tx Descriptor Protocol Error!\n"); ++ } ++ ++ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT)) ++ { ++ tp->RxDerr_cnt[0]++; ++ printk("GMAC0 Rx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT)) ++ { ++ tp->RxPerr_cnt[0]++; ++ printk("GMAC0 Rx Descriptor Protocol Error!\n"); ++ } ++ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT)) ++ { ++ tp->RxDerr_cnt[1]++; ++ printk("GMAC1 Rx AHB Bus Error!\n"); ++ } ++ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT)) ++ { ++ tp->RxPerr_cnt[1]++; ++ printk("GMAC1 Rx Descriptor Protocol Error!\n"); ++ } ++ } ++#endif //INTERRUPT_SELECT ++#ifndef GMAX_TX_INTR_DISABLED ++ if (tp->port_id == 1 && netif_running(dev) && ++ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT)) ++ || ++ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT)))) ++ { ++ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1); ++ } ++ ++ if (tp->port_id == 0 && netif_running(dev) && ++ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT)) ++ || ++ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT)))) ++ { ++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1); ++ } ++#endif ++ // clear enabled status bits ++ } ++ // Interrupt Status 4 ++#ifndef INTERRUPT_SELECT ++ if (status4 & tp->intr4_enabled) ++ { ++ #define G1_INTR4_BITS (0xff000000) ++ #define G0_INTR4_BITS (0x00ff0000) ++ ++ if (tp->port_id == 0) ++ { ++ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS)) ++ { ++ if (status4 & GMAC0_RESERVED_INT_BIT) ++ printk("GMAC0_RESERVED_INT_BIT is ON\n"); ++ if (status4 & GMAC0_MIB_INT_BIT) ++ tp->mib_full_cnt++; ++ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT) ++ tp->rx_pause_on_cnt++; ++ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT) ++ tp->tx_pause_on_cnt++; ++ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT) ++ tp->rx_pause_off_cnt++; ++ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT) ++ tp->rx_pause_off_cnt++; ++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT) ++ tp->rx_overrun_cnt++; ++ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT) ++ tp->status_changed_cnt++; ++ } ++ } ++ else if (tp->port_id == 1) ++ { ++ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS)) ++ { ++ if (status4 & GMAC1_RESERVED_INT_BIT) ++ printk("GMAC1_RESERVED_INT_BIT is ON\n"); ++ if (status4 & GMAC1_MIB_INT_BIT) ++ tp->mib_full_cnt++; ++ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT) ++ { ++ //printk("Gmac pause on\n"); ++ tp->rx_pause_on_cnt++; ++ } ++ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT) ++ { ++ //printk("Gmac pause on\n"); ++ tp->tx_pause_on_cnt++; ++ } ++ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT) ++ { ++ //printk("Gmac pause off\n"); ++ tp->rx_pause_off_cnt++; ++ } ++ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT) ++ { ++ //printk("Gmac pause off\n"); ++ tp->rx_pause_off_cnt++; ++ } ++ if (status4 & GMAC1_RX_OVERRUN_INT_BIT) ++ { ++ //printk("Gmac Rx Overrun \n"); ++ tp->rx_overrun_cnt++; ++ } ++ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT) ++ tp->status_changed_cnt++; ++ } ++ } ++#if 0 ++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) ++ { ++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++// mac_stop_rxdma(tp->sc); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, ++ tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); ++ ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, ++ SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); ++ toe_gmac_fill_free_q(); ++ tp->sw_fq_empty_cnt++; ++ ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, ++ SWFQ_EMPTY_INT_BIT); ++//#if 0 ++/* if (netif_running(dev)) ++ toe_gmac_handle_default_rxq(dev, tp); ++ printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */ ++//#endif ++ } ++#endif ++ } ++#endif //INTERRUPT_SELECT ++ toe_gmac_enable_interrupt(tp->irq); ++//enable gmac rx function when do RFC 2544 ++#ifdef IxscriptMate_1518 ++ if (storlink_ctl.pauseoff == 1) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++#endif ++ //printk("gmac_interrupt complete!\n\n"); ++// return IRQ_RETVAL(handled); ++ return IRQ_RETVAL(1); ++#ifdef CONFIG_SL_NAPI ++} ++#endif ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_handle_default_rxq ++* (1) Get rx Buffer for default Rx queue ++* (2) notify or call upper-routine to handle it ++* (3) get a new buffer and insert it into SW free queue ++* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing ++*----------------------------------------------------------------------*/ ++//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp) ++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp) ++{ ++ TOE_INFO_T *toe; ++ GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *skb; ++ DMA_RWPTR_T rwptr; ++ unsigned int pkt_size; ++ int max_cnt; ++ unsigned int desc_count; ++ unsigned int good_frame, chksum_status, rx_status; ++ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; ++ ++//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in. ++#ifdef IxscriptMate_1518 ++ if (storlink_ctl.pauseoff == 1) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++#endif ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++#if 0 ++ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr) ++ { ++ mac_stop_txdma((struct net_device *)tp->dev); ++ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n", ++ rwptr.bits32, tp->rx_rwptr.bits.rptr); ++ while(1); ++ } ++#endif ++ toe = (TOE_INFO_T *)&toe_private_data; ++ max_cnt = DEFAULT_RXQ_MAX_CNT; ++ while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr) ++// while (rwptr.bits.rptr != rwptr.bits.wptr) ++ { ++//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround. ++#ifdef IxscriptMate_1518 ++ if (storlink_ctl.pauseoff == 1) ++ { ++ if (pkt_size != 1514) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++ } ++#endif ++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; ++// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE); ++ tp->default_q_cnt++; ++ tp->rx_curr_desc = (unsigned int)curr_desc; ++ rx_status = curr_desc->word0.bits.status; ++ chksum_status = curr_desc->word0.bits.chksum_status; ++ tp->rx_status_cnt[rx_status]++; ++ tp->rx_chksum_cnt[chksum_status]++; ++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/ ++ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */ ++ good_frame=1; ++ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr)) ++ || (pkt_size < 60) ++ || (chksum_status & 0x4) ++ || rx_status) ++ { ++ good_frame = 0; ++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr) ++ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id); ++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr) ++ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id); ++ if (rx_status) ++ { ++ if (rx_status == 4 || rx_status == 7) ++ isPtr->rx_crc_errors++; ++// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id); ++ } ++#ifdef SL351x_GMAC_WORKAROUND ++ else if (pkt_size < 60) ++ { ++ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD) ++ tp->short_frames_cnt++; ++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++ } ++#endif ++// if (chksum_status) ++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ dev_kfree_skb_irq(skb); ++ } ++ if (good_frame) ++ { ++ if (curr_desc->word0.bits.drop) ++ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id); ++// if (chksum_status) ++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); ++ ++ /* get frame information from the first descriptor of the frame */ ++#ifdef SL351x_GMAC_WORKAROUND ++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++ tp->short_frames_cnt = 0; ++#endif ++ isPtr->rx_packets++; ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES))); ++ if (!skb) ++ { ++ printk("Fatal Error!!skb==NULL\n"); ++ goto next_rx; ++ } ++ tp->curr_rx_skb = skb; ++ // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE); ++ ++ // curr_desc->word2.buf_adr = 0; ++ ++ skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */ ++ skb_put(skb, pkt_size); ++ skb->dev = dev; ++ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK) ++ { ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++#ifdef CONFIG_SL351x_NAT ++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) ++ { ++ struct iphdr *ip_hdr; ++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++#endif ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++#if 0 ++#ifdef CONFIG_SL351x_RXTOE ++ if (storlink_ctl.rx_max_pktsize) { ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ int ip_hdrlen; ++ ++ ip_hdr = (struct iphdr*)&(skb->data[0]); ++ if ((skb->protocol == __constant_htons(ETH_P_IP)) && ++ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) { ++ ip_hdrlen = ip_hdr->ihl << 2; ++ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]); ++ if (tcp_hdr->syn) { ++ struct toe_conn* connection = init_toeq(ip_hdr->version, ++ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14); ++ TCP_SKB_CB(skb)->connection = connection; ++ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index); ++ // printk("%s::skb data %x, conn %x, mode %x\n", ++ // __func__, skb->data, connection, connection->mode); ++ } ++ } ++ } ++#endif ++#endif ++ } ++ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY) ++ { ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++#ifdef CONFIG_SL351x_NAT ++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) ++ { ++ struct iphdr *ip_hdr; ++ //struct tcphdr *tcp_hdr; ++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); ++ //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]); ++ if (ip_hdr->protocol == IPPROTO_UDP) ++ { ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++ else if (ip_hdr->protocol == IPPROTO_GRE) ++ { ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++ } ++#endif ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++ } ++ else ++ { ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++ } ++ ++ netif_rx(skb); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ isPtr->rx_bytes += pkt_size; ++ ++ } ++ ++next_rx: ++ // advance one for Rx default Q 0/1 ++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); ++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); ++ tp->rx_rwptr.bits32 = rwptr.bits32; ++ ++ toe_gmac_fill_free_q(); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_get_phy_vendor ++*----------------------------------------------------------------------*/ ++static unsigned int gmac_get_phy_vendor(int phy_addr) ++{ ++ unsigned int reg_val; ++ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03); ++ return reg_val; ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_set_phy_status ++*----------------------------------------------------------------------*/ ++void gmac_set_phy_status(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_STATUS_T status; ++ unsigned int reg_val, ability,wan_port_id; ++ unsigned int i = 0; ++ ++#ifdef VITESSE_G5SWITCH ++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){ ++#if 0 ++ rcv_mask = SPI_read(2,0,0x10); // Receive mask ++ rcv_mask |= 0x4F; ++ for(i=0;i<4;i++){ ++ reg_val = BIT(26)|(i<<21)|(10<<16); ++ SPI_write(3,0,1,reg_val); ++ msleep(10); ++ reg_val = SPI_read(3,0,2); ++ if(reg_val & 0x0c00){ ++ printk("Port%d:Giga mode\n",i); ++ SPI_write(1,i,0x00,0x300701B1); ++ SPI_write(1,i,0x00,0x10070181); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_1000; ++ } ++ else{ ++ reg_val = BIT(26)|(i<<21)|(5<<16); ++ SPI_write(3,0,1,reg_val); ++ msleep(10); ++ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5; ++ if ((ability & 0x0C)) /* 100M full duplex */ ++ { ++ SPI_write(1,i,0x00,0x30050472); ++ SPI_write(1,i,0x00,0x10050442); ++ printk("Port%d:100M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_100; ++ } ++ else if((ability & 0x03)) /* 10M full duplex */ ++ { ++ SPI_write(1,i,0x00,0x30050473); ++ SPI_write(1,i,0x00,0x10050443); ++ printk("Port%d:10M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ } ++ else{ ++ SPI_write(1,i,0x00,BIT(16)); // disable RX ++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet ++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty ++ msleep(1); ++ ++ SPI_write(1,i,0x00,0x20000030); // PORT_RST ++ switch_pre_link[i]=LINK_DOWN; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ rcv_mask &= ~BIT(i); ++ SPI_write(2,0,0x10,rcv_mask); // Disable Receive ++ } ++ } ++ } ++#endif ++ gmac_get_switch_status(dev); ++ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f); ++// SPI_write(2,0,0x10,rcv_mask); // Enable Receive ++ return ; ++ } ++#endif ++ ++ reg_val = gmac_get_phy_vendor(tp->phy_addr); ++ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val); ++ ++ switch (tp->phy_mode) ++ { ++ case GMAC_PHY_GMII: ++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++ #ifdef CONFIG_SL3516_ASIC ++ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */ ++ #else ++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */ ++ #endif ++ break; ++ case GMAC_PHY_RGMII_100: ++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */ ++ break; ++ case GMAC_PHY_RGMII_1000: ++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++ #ifdef CONFIG_SL3516_ASIC ++ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */ ++ #else ++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */ ++ #endif ++ break; ++ case GMAC_PHY_MII: ++ default: ++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */ ++ break; ++ } ++ ++ mii_write(tp->phy_addr,0x18,0x0041); // Phy active led ++ if (tp->auto_nego_cfg) ++ { ++ reg_val = 0x1200 | (1 << 15); ++ mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */ ++ mdelay(500); ++ reg_val &= ~(1 << 15); ++ mii_write(tp->phy_addr, 0x00, reg_val); ++ } ++ else ++ { ++ reg_val = 0; ++ reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0; ++ reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0; ++ reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0; ++ mii_write(tp->phy_addr, 0x00, reg_val); ++ mdelay(100); ++ ++ reg_val |= (1 << 15); // Reset PHY; ++ mii_write(tp->phy_addr, 0x00, reg_val); ++ } ++ ++ status.bits32 = 0; ++ /* set PHY operation mode */ ++ status.bits.mii_rmii = tp->phy_mode; ++ status.bits.reserved = 1; ++ mdelay(100); ++ while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04) ++ { ++ msleep(100); ++ i++; ++ if (i > 30) ++ break; ++ } ++ if (i>30) ++ { ++ tp->pre_phy_status = LINK_DOWN; ++ status.bits.link = LINK_DOWN; ++ // clear_bit(__LINK_STATE_START, &dev->state); ++ printk("Link Down (0x%04x) ", reg_val); ++ if(Giga_switch == 1) ++ { ++ wan_port_id = 1; ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ wan_port_id] = 0; ++#endif ++ } ++ else ++ { ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ tp->port_id] = 0; ++#endif ++ } ++ } ++ else ++ { ++ tp->pre_phy_status = LINK_UP; ++ status.bits.link = LINK_UP; ++ // set_bit(__LINK_STATE_START, &dev->state); ++ printk("Link Up (0x%04x) ",reg_val); ++ if(Giga_switch == 1) ++ { ++ wan_port_id = 1; ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ wan_port_id] = 1; ++#endif ++ } ++ else ++ { ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ tp->port_id] = 1; ++#endif ++ } ++ } ++ // value = mii_read(PHY_ADDR,0x05); ++ ++ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5; ++ ++ //#ifdef CONFIG_SL3516_ASIC ++ reg_val = mii_read(tp->phy_addr,10); ++ printk("MII REG 10 = 0x%x\n",reg_val); ++ ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000; ++ ++ printk(" 1000M/Full \n"); ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000; ++ ++ printk(" 1000M/Half \n"); ++ } ++ //#endif ++ else ++ { ++ #ifdef CONFIG_SL3516_ASIC ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_100; ++ #endif ++ printk("MII REG 5 (bit 5:15) = 0x%x\n", ability); ++ if ((ability & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ printk(" 100M/Full\n"); ++ ++ } ++ else if ((ability & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ printk(" 100M/Half\n"); ++ ++ } ++ else if ((ability & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ printk(" 10M/Full\n"); ++ ++ } ++ else if ((ability & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ printk(" 10M/Half\n"); ++ ++ } ++ } ++ if ((ability & 0x20)==0x20) ++ { ++ tp->flow_control_enable = 1; ++ printk("Flow Control Enable.\n"); ++ } ++ else ++ { ++ tp->flow_control_enable = 0; ++ printk("Flow Control Disable.\n"); ++ } ++ tp->full_duplex_status = status.bits.duplex; ++ tp->speed_status = status.bits.speed; ++ if (!tp->auto_nego_cfg) ++ { ++ status.bits.duplex = tp->full_duplex_cfg; ++ status.bits.speed = tp->speed_cfg; ++ } ++ toe_gmac_disable_tx_rx(dev); ++ mdelay(10); ++ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f); ++ toe_gmac_enable_tx_rx(dev); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_phy_thread ++*----------------------------------------------------------------------*/ ++static int gmac_phy_thread (void *data) ++{ ++ struct net_device *dev = data; ++ GMAC_INFO_T *tp = dev->priv; ++ unsigned long timeout; ++ ++ daemonize("%s", dev->name); ++ allow_signal(SIGTERM); ++// reparent_to_init(); ++// spin_lock_irq(¤t->sigmask_lock); ++// sigemptyset(¤t->blocked); ++// recalc_sigpending(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++// strncpy (current->comm, dev->name, sizeof(current->comm) - 1); ++// current->comm[sizeof(current->comm) - 1] = '\0'; ++ ++ while (1) ++ { ++ timeout = next_tick; ++ do ++ { ++ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); ++ } while (!signal_pending (current) && (timeout > 0)); ++ ++ if (signal_pending (current)) ++ { ++// spin_lock_irq(¤t->sigmask_lock); ++ flush_signals(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++ } ++ ++ if (tp->time_to_die) ++ break; ++ ++ // printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id); ++ rtnl_lock (); ++ if (tp->auto_nego_cfg){ ++#ifdef VITESSE_G5SWITCH ++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)) ++ gmac_get_switch_status(dev); ++ else ++#endif ++ gmac_get_phy_status(dev); //temp remove ++ } ++ rtnl_unlock (); ++ } ++ complete_and_exit (&tp->thr_exited, 0); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_get_switch_status ++*----------------------------------------------------------------------*/ ++#ifdef VITESSE_G5SWITCH ++void gmac_get_switch_status(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ unsigned int switch_port_id; ++ int get_link=0; ++ ++ get_link = Get_Set_port_status(); ++ if(get_link){ // link ++ if(ever_dwon){ ++ ever_dwon = 0; ++ toe_gmac_enable_tx_rx(dev); ++ netif_wake_queue(dev); ++ set_bit(__LINK_STATE_START, &dev->state); ++ } ++ } ++ else{ // all down ++ //printk("All link down\n"); ++ ever_dwon=1; ++ netif_stop_queue(dev); ++ toe_gmac_disable_tx_rx(dev); ++ clear_bit(__LINK_STATE_START, &dev->state); ++ } ++ ++ if ( tp->port_id == 1 ) ++ switch_port_id = 0; ++#ifdef CONFIG_SL351x_SYSCTL ++ if (get_link) ++ { ++ storlink_ctl.link[switch_port_id] = 1; ++ } ++ else ++ { ++ storlink_ctl.link[switch_port_id] = 0; ++ } ++ if (storlink_ctl.pauseoff == 1) ++ { ++ if (tp->flow_control_enable == 1) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ printk("Disable SWITCH Flow Control...\n"); ++ } ++ tp->flow_control_enable = 0; ++ } ++ else ++#endif ++ { ++ if (tp->flow_control_enable == 0) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ printk("Enable SWITCH Flow Control...\n"); ++ } ++ tp->flow_control_enable = 1; ++ } ++ return ; ++ ++} ++#endif ++ ++/*---------------------------------------------------------------------- ++* gmac_get_phy_status ++*----------------------------------------------------------------------*/ ++void gmac_get_phy_status(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_CONFIG0_T config0,config0_mask; ++ GMAC_STATUS_T status, old_status; ++ unsigned int reg_val,ability,wan_port_id; ++ ++ old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS); ++ ++ ++ /* read PHY status register */ ++ reg_val = mii_read(tp->phy_addr,0x01); ++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */ ++ { ++ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5; ++ /* read PHY Auto-Negotiation Link Partner Ability Register */ ++ #ifdef CONFIG_SL3516_ASIC ++ reg_val = mii_read(tp->phy_addr,10); ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000; ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000; ++ } ++ else ++ #endif ++ { ++ #ifdef CONFIG_SL3516_ASIC ++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000) ++ status.bits.mii_rmii = GMAC_PHY_RGMII_100; ++ #endif ++ if ((ability & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ } ++ else if ((ability & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ } ++ else if ((ability & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ } ++ else if ((ability & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ } ++ } ++ status.bits.link = LINK_UP; /* link up */ ++ if(Giga_switch==1) ++ { ++ wan_port_id = 1; ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ wan_port_id] = 1; ++ } ++ else ++ { ++ storlink_ctl.link[ tp->port_id] = 1; ++#endif ++ } ++ if ((ability & 0x20)==0x20) ++ { ++ if (tp->flow_control_enable == 0) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ printk("GMAC-%d Flow Control Enable.\n", tp->port_id); ++ } ++ tp->flow_control_enable = 1; ++ } ++ else ++ { ++ if (tp->flow_control_enable == 1) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ printk("GMAC-%d Flow Control Disable.\n", tp->port_id); ++ } ++ tp->flow_control_enable = 0; ++ } ++ ++ if (tp->pre_phy_status == LINK_DOWN) ++ { ++ printk("GMAC-%d LINK_UP......\n",tp->port_id); ++ tp->pre_phy_status = LINK_UP; ++ } ++ } ++ else ++ { ++ status.bits.link = LINK_DOWN; /* link down */ ++ if(Giga_switch == 1) ++ { ++ wan_port_id = 1; ++#ifdef CONFIG_SL351x_SYSCTL ++ storlink_ctl.link[ wan_port_id] = 0; ++ } ++ else ++ { ++ storlink_ctl.link[ tp->port_id] = 0; ++#endif ++ } ++ if (tp->pre_phy_status == LINK_UP) ++ { ++ printk("GMAC-%d LINK_Down......\n",tp->port_id); ++ tp->pre_phy_status = LINK_DOWN; ++ } ++ } ++ ++ tp->full_duplex_status = status.bits.duplex; ++ tp->speed_status = status.bits.speed; ++ if (!tp->auto_nego_cfg) ++ { ++ status.bits.duplex = tp->full_duplex_cfg; ++ status.bits.speed = tp->speed_cfg; ++ } ++ ++ if (old_status.bits32 != status.bits32) ++ { ++ netif_stop_queue(dev); ++ toe_gmac_disable_tx_rx(dev); ++ clear_bit(__LINK_STATE_START, &dev->state); ++ printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32); ++ mdelay(10); // let GMAC consume packet ++ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f); ++ if (status.bits.link == LINK_UP) ++ { ++ toe_gmac_enable_tx_rx(dev); ++ netif_wake_queue(dev); ++ set_bit(__LINK_STATE_START, &dev->state); ++ } ++ } ++} ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++ ++/* define GPIO pin for MDC/MDIO */ ++#ifdef CONFIG_SL3516_ASIC ++#define H_MDC_PIN 22 ++#define H_MDIO_PIN 21 ++#define G_MDC_PIN 22 ++#define G_MDIO_PIN 21 ++#else ++#define H_MDC_PIN 3 ++#define H_MDIO_PIN 2 ++#define G_MDC_PIN 0 ++#define G_MDIO_PIN 1 ++#endif ++ ++//#define GPIO_MDC 0x80000000 ++//#define GPIO_MDIO 0x00400000 ++ ++static unsigned int GPIO_MDC = 0; ++static unsigned int GPIO_MDIO = 0; ++static unsigned int GPIO_MDC_PIN = 0; ++static unsigned int GPIO_MDIO_PIN = 0; ++ ++// For PHY test definition!! ++#define LPC_EECK 0x02 ++#define LPC_EDIO 0x04 ++#define LPC_GPIO_SET 3 ++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE) ++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++}; ++/***********************/ ++/* MDC : GPIO[31] */ ++/* MDIO: GPIO[22] */ ++/***********************/ ++ ++/*************************************************** ++* All the commands should have the frame structure: ++*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE> ++****************************************************/ ++ ++/***************************************************************** ++* Inject a bit to NWay register through CSR9_MDC,MDIO ++*******************************************************************/ ++void mii_serial_write(char bit_MDO) // write data into mii PHY ++{ ++#ifdef CONFIG_SL2312_LPC_IT8712 ++ unsigned char iomode,status; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ if(bit_MDO) ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= LPC_EDIO ; //EDIO high ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ else ++ { ++ status = inb_gpio( LPC_GPIO_SET); ++ status &= ~(LPC_EDIO) ; //EDIO low ++ outb_gpio(LPC_GPIO_SET, status); ++ } ++ ++ status |= LPC_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(LPC_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++#else ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR; ++ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */ ++ writel(value,addr); ++ if(bit_MDO) ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDIO,addr); /* set MDIO to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDIO,addr); /* set MDIO to 0 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ } ++ ++#endif ++} ++ ++/********************************************************************** ++* read a bit from NWay register through CSR9_MDC,MDIO ++***********************************************************************/ ++unsigned int mii_serial_read(void) // read data from mii PHY ++{ ++#ifdef CONFIG_SL2312_LPC_IT8712 ++ unsigned char iomode,status; ++ unsigned int value ; ++ ++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET); ++ iomode &= ~(LPC_EDIO) ; // Set EDIO input ++ iomode |= (LPC_EECK) ; // Set EECK,EECS output ++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode); ++ ++ status = inb_gpio( LPC_GPIO_SET); ++ status |= LPC_EECK ; //EECK high ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ status &= ~(LPC_EECK) ; //EECK low ++ outb_gpio(LPC_GPIO_SET, status); ++ ++ value = inb_gpio( LPC_GPIO_SET); ++ ++ value = value>>2 ; ++ value &= 0x01; ++ ++ return value ; ++ ++#else ++ unsigned int *addr; ++ unsigned int value; ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR); ++ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */ ++ writel(value,addr); ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET); ++ writel(GPIO_MDC,addr); /* set MDC to 1 */ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR); ++ writel(GPIO_MDC,addr); /* set MDC to 0 */ ++ ++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN); ++ value = readl(addr); ++ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN; ++ return(value); ++ ++#endif ++} ++ ++/*************************************** ++* preamble + ST ++***************************************/ ++void mii_pre_st(void) ++{ ++ unsigned char i; ++ ++ for(i=0;i<32;i++) // PREAMBLE ++ mii_serial_write(1); ++ mii_serial_write(0); // ST ++ mii_serial_write(1); ++} ++ ++ ++/****************************************** ++* Read MII register ++* phyad -> physical address ++* regad -> register address ++***************************************** */ ++unsigned int mii_read(unsigned char phyad,unsigned char regad) ++{ ++ unsigned int i,value; ++ unsigned int bit; ++ ++ if (phyad == GPHY_ADDR) ++ { ++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */ ++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */ ++ } ++ else ++ { ++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */ ++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */ ++ } ++ GPIO_MDC = (1<<GPIO_MDC_PIN); ++ GPIO_MDIO = (1<<GPIO_MDIO_PIN); ++ ++ mii_pre_st(); // PRE+ST ++ mii_serial_write(1); // OP ++ mii_serial_write(0); ++ ++ for (i=0;i<5;i++) { // PHYAD ++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ for (i=0;i<5;i++) { // REGAD ++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ mii_serial_read(); // TA_Z ++// if((bit=mii_serial_read()) !=0 ) // TA_0 ++// { ++// return(0); ++// } ++ value=0; ++ for (i=0;i<16;i++) { // READ DATA ++ bit=mii_serial_read(); ++ value += (bit<<(15-i)) ; ++ } ++ ++ mii_serial_write(0); // dumy clock ++ mii_serial_write(0); // dumy clock ++ ++ //printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value); ++ return(value); ++} ++ ++/****************************************** ++* Write MII register ++* phyad -> physical address ++* regad -> register address ++* value -> value to be write ++***************************************** */ ++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value) ++{ ++ unsigned int i; ++ char bit; ++ ++ printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value); ++ if (phyad == GPHY_ADDR) ++ { ++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */ ++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */ ++ } ++ else ++ { ++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */ ++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */ ++ } ++ GPIO_MDC = (1<<GPIO_MDC_PIN); ++ GPIO_MDIO = (1<<GPIO_MDIO_PIN); ++ ++ mii_pre_st(); // PRE+ST ++ mii_serial_write(0); // OP ++ mii_serial_write(1); ++ for (i=0;i<5;i++) { // PHYAD ++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ ++ for (i=0;i<5;i++) { // REGAD ++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ; ++ mii_serial_write(bit); ++ } ++ mii_serial_write(1); // TA_1 ++ mii_serial_write(0); // TA_0 ++ ++ for (i=0;i<16;i++) { // OUT DATA ++ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ; ++ mii_serial_write(bit); ++ } ++ mii_serial_write(0); // dumy clock ++ mii_serial_write(0); // dumy clock ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_set_rx_mode ++*----------------------------------------------------------------------*/ ++static void gmac_set_rx_mode(struct net_device *dev) ++{ ++ GMAC_RX_FLTR_T filter; ++ unsigned int mc_filter[2]; /* Multicast hash filter */ ++ int bit_nr; ++ unsigned int i; ++ GMAC_INFO_T *tp = dev->priv; ++ ++// printk("%s : dev->flags = %x \n",__func__,dev->flags); ++// dev->flags |= IFF_ALLMULTI; /* temp */ ++ filter.bits32 = 0; ++ filter.bits.error = 0; ++ if (dev->flags & IFF_PROMISC) ++ { ++ filter.bits.error = 1; ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else if (dev->flags & IFF_ALLMULTI) ++ { ++// filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else ++ { ++ struct dev_mc_list *mclist; ++ ++// filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0; ++ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next) ++ { ++ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f; ++ if (bit_nr < 32) ++ { ++ mc_filter[0] = mc_filter[0] | (1<<bit_nr); ++ } ++ else ++ { ++ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32)); ++ } ++ } ++ } ++ gmac_write_reg(tp->base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff); //chech base address!!! ++ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff); ++ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff); ++ return; ++} ++ ++#ifdef CONFIG_SL_NAPI ++/*---------------------------------------------------------------------- ++* gmac_rx_poll ++*----------------------------------------------------------------------*/ ++static int gmac_rx_poll(struct net_device *dev, int *budget) ++{ ++ TOE_INFO_T *toe; ++ GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *skb; ++ DMA_RWPTR_T rwptr; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int good_frame, chksum_status, rx_status; ++ int rx_pkts_num = 0; ++ int quota = min(dev->quota, *budget); ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ unsigned int status4; ++ volatile DMA_RWPTR_T fq_rwptr; ++ int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64 ++ //unsigned long rx_old_bytes; ++ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; ++ //unsigned long long rx_time; ++ ++ ++ ++#if 1 ++ if (do_again) ++ { ++ toe_gmac_fill_free_q(); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32); ++ if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr) ++ { ++ //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ do_again =0; ++ //netif_rx_complete(dev); ++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++ } ++ else ++ return 1; ++ } ++#endif ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++#if 0 ++ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr) ++ { ++ mac_stop_txdma((struct net_device *)tp->dev); ++ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n", ++ rwptr.bits32, tp->rx_rwptr.bits.rptr); ++ while(1); ++ } ++#endif ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 ); ++ //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); ++// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota)) ++ ++ while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota)) ++ { ++ ++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; ++ tp->default_q_cnt++; ++ tp->rx_curr_desc = (unsigned int)curr_desc; ++ rx_status = curr_desc->word0.bits.status; ++ chksum_status = curr_desc->word0.bits.chksum_status; ++ tp->rx_status_cnt[rx_status]++; ++ tp->rx_chksum_cnt[chksum_status]++; ++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/ ++ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */ ++ good_frame=1; ++ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr)) ++ || (pkt_size < 60) ++ || (chksum_status & 0x4) ++ || rx_status ) ++// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr )) ++ { ++ good_frame = 0; ++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr) ++ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id); ++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr) ++ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id); ++ if (rx_status) ++ { ++ if (rx_status == 4 || rx_status == 7) ++ isPtr->rx_crc_errors++; ++// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id); ++ } ++#ifdef SL351x_GMAC_WORKAROUND ++ else if (pkt_size < 60) ++ { ++ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD) ++ tp->short_frames_cnt++; ++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++ } ++#endif ++// if (chksum_status) ++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ dev_kfree_skb_irq(skb); ++ } ++ if (good_frame) ++ { ++ if (curr_desc->word0.bits.drop) ++ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id); ++// if (chksum_status) ++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); ++ ++#ifdef SL351x_GMAC_WORKAROUND ++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ GMAC_CONFIG0_T config0; ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ } ++ tp->short_frames_cnt = 0; ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ isPtr->rx_packets++; ++ //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE); ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ tp->curr_rx_skb = skb; ++ // curr_desc->word2.buf_adr = 0; ++ ++ //skb_reserve (skb, SKB_RESERVE_BYTES); ++ skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */ ++ //if ((skb->tail+pkt_size) > skb->end ) ++ //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end); ++ skb_put(skb, pkt_size); ++ ++ ++ skb->dev = dev; ++ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK) ++ { ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++#ifdef CONFIG_SL351x_NAT ++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) ++ { ++ struct iphdr *ip_hdr; ++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++#endif ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++#if 0 ++#ifdef CONFIG_SL351x_RXTOE ++ if (storlink_ctl.rx_max_pktsize) { ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ int ip_hdrlen; ++ ++ ip_hdr = (struct iphdr*)&(skb->data[0]); ++ if ((skb->protocol == __constant_htons(ETH_P_IP)) && ++ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) { ++ ip_hdrlen = ip_hdr->ihl << 2; ++ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]); ++ if (tcp_hdr->syn) { ++ struct toe_conn* connection = init_toeq(ip_hdr->version, ++ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14); ++ TCP_SKB_CB(skb)->connection = connection; ++ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index); ++ // printk("%s::skb data %x, conn %x, mode %x\n", ++ // __func__, skb->data, connection, connection->mode); ++ } ++ } ++ } ++#endif ++#endif ++ } ++ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY) ++ { ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++#ifdef CONFIG_SL351x_NAT ++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) ++ { ++ struct iphdr *ip_hdr; ++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); ++ if (ip_hdr->protocol == IPPROTO_UDP) ++ { ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++ else if (ip_hdr->protocol == IPPROTO_GRE) ++ { ++ sl351x_nat_input(skb, ++ tp->port_id, ++ (void *)curr_desc->word3.bits.l3_offset, ++ (void *)curr_desc->word3.bits.l4_offset); ++ } ++ } ++#endif ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++ } ++ else ++ { ++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ ++ } ++ //netif_rx(skb); /* socket rx */ ++ netif_receive_skb(skb); //For NAPI ++ dev->last_rx = jiffies; ++ ++ isPtr->rx_bytes += pkt_size; ++ //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes); ++ ++ ++ } ++ // advance one for Rx default Q 0/1 ++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); ++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); ++ tp->rx_rwptr.bits32 = rwptr.bits32; ++ rx_pkts_num++; ++ //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again ++ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 ); ++#if 0 ++ if ((status4 & 0x1) == 0) ++ { ++ //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 )))) ++ if (tp->total_q_cnt_napi < 1024) ++ { ++ tp->total_q_cnt_napi++; ++ toe_gmac_fill_free_q(); //for iperf test disable ++ } ++ //else ++ //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes ); ++ ++ } ++#endif ++ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); ++ //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 ); ++ //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); ++ } ++ // advance one for Rx default Q 0/1 ++ ++ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); ++ //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); ++ //tp->rx_rwptr.bits32 = rwptr.bits32; ++ //rwptr.bits.rptr = rwptr.bits.rptr; ++ ++ dev->quota -= rx_pkts_num; ++ *budget -= rx_pkts_num; ++ ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again ++ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again ++ //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); ++// if (rwptr.bits.rptr > rwptr.bits.wptr ) ++// { ++ //toe_gmac_disable_rx(dev); ++ //wait_event_interruptible_timeout(freeq_wait, ++ //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT); ++ //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n", ++ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); ++// return 1; ++// } ++ ++ if (rwptr.bits.rptr == rwptr.bits.wptr) ++ { ++ unsigned int data32; ++ //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); ++ ++ /* Receive descriptor is empty now */ ++#if 1 ++ if (status4 & 0x1) ++ { ++ do_again =1; ++ //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt ++ //toe_gmac_disable_interrupt(tp->irq); ++ tp->sw_fq_empty_cnt++; ++ //toe_gmac_disable_rx(dev); ++ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt); ++ //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256))) ++ //{ ++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, ++ //0x1); ++ //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32); ++ //if ((status4 & 0x1) == 0) ++ //break; ++ return 1; ++ //} ++ ++ } ++#endif ++ //toe_gmac_fill_free_q(); ++ netif_rx_complete(dev); ++ // enable GMAC-0 rx interrupt ++ // class-Q & TOE-Q are implemented in future ++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //if (tp->port_id == 0) ++ //data32 |= DEFAULT_Q0_INT_BIT; ++ //else ++ //data32 |= DEFAULT_Q1_INT_BIT; ++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n", ++ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); ++ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ return 0; ++ } ++ else ++ { ++ //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); ++ return 1; ++ } ++} ++#endif ++ ++/*---------------------------------------------------------------------- ++* gmac_tx_timeout ++*----------------------------------------------------------------------*/ ++void gmac_tx_timeout(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ ++#ifdef CONFIG_SL351x_SYSCTL ++ if (tp->operation && storlink_ctl.link[tp->port_id]) ++#else ++ if (tp->operation) ++#endif ++ { ++ netif_wake_queue(dev); ++ } ++} ++ ++ ++ ++/*---------------------------------------------------------------------- ++* mac_set_rule_reg ++*----------------------------------------------------------------------*/ ++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2) ++{ ++ int total_key_dwords; ++ ++ total_key_dwords = 1; ++ ++ if (reg0 & MR_L2_BIT) ++ { ++ if (reg0 & MR_DA_BIT) total_key_dwords += 2; ++ if (reg0 & MR_SA_BIT) total_key_dwords += 2; ++ if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--; ++ if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++; ++ } ++ if (reg0 & MR_L3_BIT) ++ { ++ if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS)) ++ total_key_dwords++; ++ if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++; ++ if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4 ++ { ++ if (reg1 & 0xff000000) total_key_dwords += 1; ++ if (reg1 & 0x00ff0000) total_key_dwords += 1; ++ } ++ else ++ { ++ if (reg1 & 0xff000000) total_key_dwords += 4; ++ if (reg1 & 0x00ff0000) total_key_dwords += 4; ++ } ++ } ++ if (reg0 & MR_L4_BIT) ++ { ++ if (reg1 & 0x0000f000) total_key_dwords += 1; ++ if (reg1 & 0x00000f00) total_key_dwords += 1; ++ if (reg1 & 0x000000f0) total_key_dwords += 1; ++ if (reg1 & 0x0000000f) total_key_dwords += 1; ++ if (reg2 & 0xf0000000) total_key_dwords += 1; ++ if (reg2 & 0x0f000000) total_key_dwords += 1; ++ } ++ if (reg0 & MR_L7_BIT) ++ { ++ if (reg2 & 0x00f00000) total_key_dwords += 1; ++ if (reg2 & 0x000f0000) total_key_dwords += 1; ++ if (reg2 & 0x0000f000) total_key_dwords += 1; ++ if (reg2 & 0x00000f00) total_key_dwords += 1; ++ if (reg2 & 0x000000f0) total_key_dwords += 1; ++ if (reg2 & 0x0000000f) total_key_dwords += 1; ++ } ++ ++ if (total_key_dwords > HASH_MAX_KEY_DWORD) ++ return -1; ++ ++ if (total_key_dwords == 0 && enabled) ++ return -2; ++ ++ mac_set_rule_enable_bit(mac, rule, 0); ++ if (enabled) ++ { ++ mac_set_MRxCRx(mac, rule, 0, reg0); ++ mac_set_MRxCRx(mac, rule, 1, reg1); ++ mac_set_MRxCRx(mac, rule, 2, reg2); ++ mac_set_rule_action(mac, rule, total_key_dwords); ++ mac_set_rule_enable_bit(mac, rule, enabled); ++ } ++ else ++ { ++ mac_set_rule_action(mac, rule, 0); ++ } ++ return total_key_dwords; ++} ++ ++/*---------------------------------------------------------------------- ++* mac_get_rule_enable_bit ++*----------------------------------------------------------------------*/ ++int mac_get_rule_enable_bit(int mac, int rule) ++{ ++ switch (rule) ++ { ++ case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1); ++ case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1); ++ case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1); ++ case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1); ++ default: return 0; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_rule_enable_bit ++*----------------------------------------------------------------------*/ ++void mac_set_rule_enable_bit(int mac, int rule, int data) ++{ ++ u32 reg; ++ ++ if (data & ~1) ++ return; ++ ++ switch (rule) ++ { ++ case 0: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg); ++ break; ++ case 1: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg); ++ break; ++ case 2: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg); ++ break; ++ case 3: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_rule_action ++*----------------------------------------------------------------------*/ ++int mac_set_rule_action(int mac, int rule, int data) ++{ ++ u32 reg; ++ ++ if (data > 32) ++ return -1; ++ ++ if (data) ++ data = (data << 6) | (data + HASH_ACTION_DWORDS); ++ switch (rule) ++ { ++ case 0: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff)); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data); ++ break; ++ case 1: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16)); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16)); ++ break; ++ case 2: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff)); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | data); ++ break; ++ case 3: ++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16)); ++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16)); ++ break; ++ default: ++ return -1; ++ } ++ ++ return 0; ++} ++/*---------------------------------------------------------------------- ++* mac_get_MRxCRx ++*----------------------------------------------------------------------*/ ++int mac_get_MRxCRx(int mac, int rule, int ctrlreg) ++{ ++ int reg; ++ ++ switch (rule) ++ { ++ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break; ++ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break; ++ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break; ++ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break; ++ default: return 0; ++ } ++ return mac_read_dma_reg(mac, reg); ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_MRxCRx ++*----------------------------------------------------------------------*/ ++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data) ++{ ++ int reg; ++ ++ switch (rule) ++ { ++ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break; ++ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break; ++ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break; ++ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break; ++ default: return; ++ } ++ mac_write_dma_reg(mac, reg, data); ++} ++ ++/*---------------------------------------------------------------------- ++* mac_set_rule_priority ++*----------------------------------------------------------------------*/ ++void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3) ++{ ++ int i; ++ GMAC_MRxCR0_T reg[4]; ++ ++ for (i=0; i<4; i++) ++ reg[i].bits32 = mac_get_MRxCRx(mac, i, 0); ++ ++ reg[0].bits.priority = p0; ++ reg[1].bits.priority = p1; ++ reg[2].bits.priority = p2; ++ reg[3].bits.priority = p3; ++ ++ for (i=0; i<4; i++) ++ mac_set_MRxCRx(mac, i, 0, reg[i].bits32); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_netdev_ioctl ++*----------------------------------------------------------------------*/ ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ int rc = 0; ++ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data; ++ ++#ifdef br_if_ioctl ++ struct ethtool_cmd ecmd; //br_if.c will call this ioctl ++ GMAC_INFO_T *tp = dev->priv; ++#endif ++ ++#ifdef CONFIG_SL351x_NAT ++ if (cmd == SIOCDEVPRIVATE) ++ return sl351x_nat_ioctl(dev, rq, cmd); ++#endif ++ ++ switch (cmd) { ++ case SIOCETHTOOL: ++#ifdef br_if_ioctl //br_if.c will call this ioctl ++ if (!netif_running(dev)) ++ { ++ printk("Before changing the H/W address,please down the device.\n"); ++ return -EINVAL; ++ } ++ memset((void *) &ecmd, 0, sizeof (ecmd)); ++ ecmd.supported = ++ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | ++ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | ++ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; ++ ecmd.port = PORT_TP; ++ ecmd.transceiver = XCVR_EXTERNAL; ++ ecmd.phy_address = tp->phy_addr; ++ switch (tp->speed_status) ++ { ++ case GMAC_SPEED_10: ecmd.speed = SPEED_10; break; ++ case GMAC_SPEED_100: ecmd.speed = SPEED_100; break; ++ case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break; ++ default: ecmd.speed = SPEED_10; break; ++ } ++ ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF; ++ ecmd.advertising = ADVERTISED_TP; ++ ecmd.advertising |= ADVERTISED_Autoneg; ++ ecmd.autoneg = AUTONEG_ENABLE; ++ if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd))) ++ return -EFAULT; ++#endif ++ ++ break; ++ ++ case SIOCSIFHWADDR: ++ if (!netif_running(dev)) ++ { ++ printk("Before changing the H/W address,please down the device.\n"); ++ return -EINVAL; ++ } ++ gmac_set_mac_address(dev,hwa); ++ break; ++ ++ case SIOCGMIIPHY: /* Get the address of the PHY in use. */ ++ break; ++ ++ case SIOCGMIIREG: /* Read the specified MII register. */ ++ break; ++ ++ case SIOCSMIIREG: /* Write the specified MII register */ ++ break; ++ ++ default: ++ rc = -EOPNOTSUPP; ++ break; ++ } ++ ++ return rc; ++} ++ ++#ifdef SL351x_GMAC_WORKAROUND ++ ++#define GMAC_TX_STATE_OFFSET 0x60 ++#define GMAC_RX_STATE_OFFSET 0x64 ++#define GMAC_POLL_HANGED_NUM 200 ++#define GMAC_RX_HANGED_STATE 0x4b2000 ++#define GMAC_RX_HANGED_MASK 0xdff000 ++#define GMAC_TX_HANGED_STATE 0x34012 ++#define GMAC_TX_HANGED_MASK 0xfffff ++#define TOE_GLOBAL_REG_SIZE (0x78/sizeof(u32)) ++#define TOE_DMA_REG_SIZE (0xd0/sizeof(u32)) ++#define TOE_GMAC_REG_SIZE (0x30/sizeof(u32)) ++#define GMAC0_RX_HANG_BIT (1 << 0) ++#define GMAC0_TX_HANG_BIT (1 << 1) ++#define GMAC1_RX_HANG_BIT (1 << 2) ++#define GMAC1_TX_HANG_BIT (1 << 3) ++ ++int gmac_in_do_workaround; ++#if 0 ++int debug_cnt, poll_max_cnt; ++#endif ++u32 gmac_workaround_cnt[4]; ++u32 toe_global_reg[TOE_GLOBAL_REG_SIZE]; ++u32 toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE]; ++u32 toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE]; ++u32 gmac_short_frame_workaround_cnt[2]; ++ ++static void sl351x_gmac_release_buffers(void); ++static void sl351x_gmac_release_swtx_q(void); ++static void sl351x_gmac_release_rx_q(void); ++#ifdef _TOEQ_CLASSQ_READY_ ++static void sl351x_gmac_release_class_q(void); ++static void sl351x_gmac_release_toe_q(void); ++static void sl351x_gmac_release_intr_q(void); ++#endif ++static void sl351x_gmac_release_sw_free_q(void); ++static void sl351x_gmac_release_hw_free_q(void); ++#ifdef CONFIG_SL351x_NAT ++static int get_free_desc_cnt(unsigned long rwptr, int total); ++static void sl351x_gmac_release_hwtx_q(void); ++u32 sl351x_nat_workaround_cnt; ++#endif ++void sl351x_gmac_save_reg(void); ++void sl351x_gmac_restore_reg(void); ++ ++ ++/*---------------------------------------------------------------------- ++* sl351x_poll_gmac_hanged_status ++* - Called by timer routine, period 10ms ++* - If (state != 0 && state == prev state && ) ++*----------------------------------------------------------------------*/ ++void sl351x_poll_gmac_hanged_status(u32 data) ++{ ++ int i; ++ u32 state; ++ TOE_INFO_T *toe; ++ GMAC_INFO_T *tp; ++ u32 hanged_state; ++ // int old_operation[GMAC_NUM]; ++#ifdef CONFIG_SL351x_NAT ++ u32 hw_free_cnt; ++#endif ++ ++ if (gmac_in_do_workaround) ++ return; ++ ++ gmac_in_do_workaround = 1; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ hanged_state = 0; ++ ++#ifdef SL351x_TEST_WORKAROUND ++ if (toe->gmac[0].operation || toe->gmac[1].operation) ++ { ++ debug_cnt++; ++ if (debug_cnt == (30 * HZ)) ++ { ++ debug_cnt = 0; ++ hanged_state = GMAC0_RX_HANG_BIT; ++ goto do_workaround; ++ } ++ } ++#endif ++ if (toe->gmac[0].operation) ++ hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT; ++ ++#if (GMAC_NUM > 1) ++ if (toe->gmac[1].operation) ++ hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT; ++#endif ++ ++ for (i=0; i<GMAC_POLL_HANGED_NUM; i++) ++ { ++ if (hanged_state & GMAC0_RX_HANG_BIT) ++ { ++ state = readl(TOE_GMAC0_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK; ++ if (state != GMAC_RX_HANGED_STATE) ++ hanged_state &= ~GMAC0_RX_HANG_BIT; ++ } ++ if (hanged_state & GMAC0_TX_HANG_BIT) ++ { ++ state = readl(TOE_GMAC0_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK; ++ if (state != GMAC_TX_HANGED_STATE) ++ hanged_state &= ~GMAC0_TX_HANG_BIT; ++ } ++#if (GMAC_NUM > 1) ++ if (hanged_state & GMAC1_RX_HANG_BIT) ++ { ++ state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK; ++ if (state != GMAC_RX_HANGED_STATE) ++ hanged_state &= ~GMAC1_RX_HANG_BIT; ++ } ++ if (hanged_state & GMAC1_TX_HANG_BIT) ++ { ++ state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK; ++ if (state != GMAC_TX_HANGED_STATE) ++ hanged_state &= ~GMAC1_TX_HANG_BIT; ++ } ++#endif ++ if (!hanged_state) ++ { ++#if 0 ++ if (i < poll_max_cnt) ++ poll_max_cnt = i; ++#endif ++ if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ gmac_short_frame_workaround_cnt[0]++; ++ toe->gmac[0].short_frames_cnt = 0; ++ goto do_workaround; ++ } ++#if (GMAC_NUM > 1) ++ if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) ++ { ++ gmac_short_frame_workaround_cnt[1]++; ++ toe->gmac[1].short_frames_cnt = 0; ++ goto do_workaround; ++ } ++#endif ++ ++#ifdef CONFIG_SL351x_NAT ++ hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++ hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM); ++#ifdef NAT_WORKAROUND_BY_RESET_GMAC ++ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ)) ++ { ++ sl351x_nat_workaround_cnt++; ++ goto do_workaround; ++ } ++#else ++ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2))) ++ { ++ sl351x_nat_workaround_cnt++; ++ sl351x_nat_workaround_handler(); ++ } ++#endif ++#endif ++ gmac_in_do_workaround = 0; ++ add_timer(&gmac_workround_timer_obj); ++ return; ++ } ++ } ++ ++do_workaround: ++ ++ gmac_initialized = 0; ++ if (hanged_state) ++ { ++ if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++; ++ if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++; ++ if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++; ++ if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++; ++ } ++ ++ for (i=0; i<GMAC_NUM; i++) ++ { ++ tp=(GMAC_INFO_T *)&toe->gmac[i]; ++ // old_operation[i] = tp->operation; ++ if (tp->operation) ++ { ++ netif_stop_queue(tp->dev); ++ clear_bit(__LINK_STATE_START, &tp->dev->state); ++ toe_gmac_disable_interrupt(tp->irq); ++ toe_gmac_disable_tx_rx(tp->dev); ++ toe_gmac_hw_stop(tp->dev); ++ } ++ } ++ ++ // clear all status bits ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); ++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ ++#if 0 ++ if ((hanged_state & GMAC0_RX_HANG_BIT) && ++ (readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0)) ++ { ++ struct sk_buff *skb; ++ unsigned int buf; ++ buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3; ++#ifdef CONFIG_SL351x_NAT ++ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma) ++#endif ++ { ++ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES)); ++ printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb); ++ dev_kfree_skb(skb); ++ } ++ } ++ if ((hanged_state & GMAC1_RX_HANG_BIT) && ++ (readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0)) ++ { ++ struct sk_buff *skb; ++ unsigned int buf; ++ buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3; ++#ifdef CONFIG_SL351x_NAT ++ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma) ++#endif ++ { ++ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES)); ++ printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb); ++ dev_kfree_skb(skb); ++ } ++ } ++#endif ++ ++ sl351x_gmac_release_buffers(); ++ sl351x_gmac_save_reg(); ++ toe_gmac_sw_reset(); ++ sl351x_gmac_restore_reg(); ++ ++ if (toe->gmac[0].default_qhdr->word1.bits32) ++ { ++ // printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1); ++ sl351x_gmac_release_rx_q(); ++ writel(0, &toe->gmac[0].default_qhdr->word1); ++ } ++ if (toe->gmac[1].default_qhdr->word1.bits32) ++ { ++ // printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1); ++ sl351x_gmac_release_rx_q(); ++ writel(0, &toe->gmac[1].default_qhdr->word1); ++ } ++ ++ gmac_initialized = 1; ++ ++#ifdef CONFIG_SL351x_NAT ++ writel(0, TOE_GLOBAL_BASE + 0x4084); ++#endif ++ ++ for (i=0; i<GMAC_NUM; i++) ++ { ++ tp=(GMAC_INFO_T *)&toe->gmac[i]; ++ if (tp->operation) ++ { ++ toe_gmac_enable_interrupt(tp->irq); ++ toe_gmac_hw_start(tp->dev); ++ toe_gmac_enable_tx_rx(tp->dev); ++ netif_wake_queue(tp->dev); ++ set_bit(__LINK_STATE_START, &tp->dev->state); ++ } ++ } ++ ++ gmac_in_do_workaround = 0; ++ add_timer(&gmac_workround_timer_obj); ++} ++ ++/*---------------------------------------------------------------------- ++* get_free_desc_cnt ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static int get_free_desc_cnt(unsigned long rwptr, int total) ++{ ++ unsigned short wptr = rwptr & 0xffff; ++ unsigned short rptr = rwptr >> 16; ++ ++ if (wptr >= rptr) ++ return (total - wptr + rptr); ++ else ++ return (rptr - wptr); ++} ++#endif ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_buffers ++*----------------------------------------------------------------------*/ ++static void sl351x_gmac_release_buffers(void) ++{ ++ // Free buffers & Descriptors in all SW Tx Queues ++ sl351x_gmac_release_swtx_q(); ++ ++ // Free buffers in Default Rx Queues ++ sl351x_gmac_release_rx_q(); ++ ++#ifdef _TOEQ_CLASSQ_READY_ ++ // Free buffers in Classification Queues ++ sl351x_gmac_release_class_q(); ++ ++ // Free buffers in TOE Queues ++ sl351x_gmac_release_toe_q(); ++ ++ // Free buffers in Interrupt Queues ++ sl351x_gmac_release_intr_q(); ++#endif ++ ++ // Free buffers & descriptors in SW free queue ++ sl351x_gmac_release_sw_free_q(); ++ ++ // Free buffers & descriptors in HW free queue ++ sl351x_gmac_release_hw_free_q(); ++ ++#ifdef CONFIG_SL351x_NAT ++ // Free buffers & descriptors in HW free queue ++ sl351x_gmac_release_hwtx_q(); ++#endif ++} ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_swtx_q ++*----------------------------------------------------------------------*/ ++static void sl351x_gmac_release_swtx_q(void) ++{ ++ int i, j; ++ GMAC_TXDESC_T *curr_desc; ++ unsigned int desc_count; ++ TOE_INFO_T *toe; ++ GMAC_INFO_T *tp; ++ GMAC_SWTXQ_T *swtxq; ++ DMA_RWPTR_T rwptr; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ tp = (GMAC_INFO_T *)&toe->gmac[0]; ++ for (i=0; i<GMAC_NUM; i++, tp++) ++ { ++ if (!tp->existed) continue; ++ swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0]; ++ for (j=0; j<TOE_SW_TXQ_NUM; j++, swtxq++) ++ { ++ for (;;) ++ { ++ rwptr.bits32 = readl(swtxq->rwptr_reg); ++ if (rwptr.bits.rptr == swtxq->finished_idx) ++ break; ++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; ++ // if (curr_desc->word0.bits.status_tx_ok) ++ { ++ desc_count = curr_desc->word0.bits.desc_count; ++ while (--desc_count) ++ { ++ curr_desc->word0.bits.status_tx_ok = 0; ++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num); ++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; ++ } ++ ++ curr_desc->word0.bits.status_tx_ok = 0; ++ if (swtxq->tx_skb[swtxq->finished_idx]) ++ { ++ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]); ++ swtxq->tx_skb[swtxq->finished_idx] = NULL; ++ } ++ } ++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num); ++ } ++ writel(0, swtxq->rwptr_reg); ++ swtxq->finished_idx = 0; ++ } ++ } ++ ++} ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_rx_q ++*----------------------------------------------------------------------*/ ++static void sl351x_gmac_release_rx_q(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ GMAC_INFO_T *tp; ++ DMA_RWPTR_T rwptr; ++ volatile GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *skb; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ tp = (GMAC_INFO_T *)&toe->gmac[0]; ++ for (i=0; i<GMAC_NUM; i++, tp++) ++ { ++ if (!tp->existed) continue; ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++ while (rwptr.bits.rptr != rwptr.bits.wptr) ++ { ++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ dev_kfree_skb_irq(skb); ++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); ++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++ } // while ++ writel(0, &tp->default_qhdr->word1); ++ tp->rx_rwptr.bits32 = 0; ++ } // for ++ ++} ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_class_q ++*----------------------------------------------------------------------*/ ++#ifdef _TOEQ_CLASSQ_READY_ ++static void sl351x_gmac_release_class_q(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ CLASSQ_INFO_T *classq; ++ DMA_RWPTR_T rwptr; ++ volatile GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *skb; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ classq = (CLASSQ_INFO_T *)&toe->classq[0]; ++ for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++) ++ { ++ rwptr.bits32 = readl(&classq->qhdr->word1); ++ while (rwptr.bits.rptr != rwptr.bits.wptr) ++ { ++ curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr; ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ dev_kfree_skb_irq(skb); ++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num); ++ SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr); ++ rwptr.bits32 = readl(&classq->qhdr->word1); ++ } // while ++ writel(0, &classq->qhdr->word1); ++ classq->rwptr.bits32 = 0; ++ } // for ++ ++} ++#endif ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_toe_q ++*----------------------------------------------------------------------*/ ++#ifdef _TOEQ_CLASSQ_READY_ ++static void sl351x_gmac_release_toe_q(void) ++{ ++ int i; ++ TOE_INFO_T *toe; ++ TOEQ_INFO_T *toeq_info; ++ TOE_QHDR_T *toe_qhdr; ++ DMA_RWPTR_T rwptr; ++ volatile GMAC_RXDESC_T *curr_desc; ++ unsigned int rptr, wptr; ++ GMAC_RXDESC_T *toe_curr_desc; ++ struct sk_buff *skb; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE; ++ for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++) ++ { ++ toeq_info = (TOEQ_INFO_T *)&toe->toeq[i]; ++ wptr = toe_qhdr->word1.bits.wptr; ++ rptr = toe_qhdr->word1.bits.rptr; ++ while (rptr != wptr) ++ { ++ toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr; ++ skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ dev_kfree_skb_irq(skb); ++ rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num); ++ SET_RPTR(&toe_qhdr->word1.bits32, rptr); ++ wptr = toe_qhdr->word1.bits.wptr; ++ rptr = toe_qhdr->word1.bits.rptr; ++ } ++ toe_qhdr->word1.bits32 = 0; ++ toeq_info->rwptr.bits32 = 0; ++ } ++} ++#endif ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_intr_q ++*----------------------------------------------------------------------*/ ++#ifdef _TOEQ_CLASSQ_READY_ ++static void sl351x_gmac_release_intr_q(void) ++{ ++} ++#endif ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_sw_free_q ++*----------------------------------------------------------------------*/ ++static void sl351x_gmac_release_sw_free_q(void) ++{ ++ TOE_INFO_T *toe; ++ volatile DMA_RWPTR_T fq_rwptr; ++ volatile GMAC_RXDESC_T *fq_desc; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ ++ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) ++ { ++ struct sk_buff *skb; ++ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); while(1); ++ } ++ // *(unsigned int *)(skb->data) = (unsigned int)skb; ++ REG32(skb->data) = (unsigned long)skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); ++ ++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM); ++ fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr; ++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); ++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ } ++ ++ toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1; ++ toe->fq_rx_rwptr.bits.rptr = 0; ++ writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ ++} ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_hw_free_q ++*----------------------------------------------------------------------*/ ++static void sl351x_gmac_release_hw_free_q(void) ++{ ++ DMA_RWPTR_T rwptr_reg; ++ ++#ifdef CONFIG_SL351x_NAT ++ int i; ++ TOE_INFO_T *toe; ++ GMAC_RXDESC_T *desc_ptr; ++ unsigned int buf_ptr; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base; ++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma; ++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++) ++ { ++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE; ++ desc_ptr->word1.bits.sw_id = i; ++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr; ++ desc_ptr++; ++ buf_ptr += HW_RX_BUF_SIZE; ++ } ++#endif ++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1; ++ rwptr_reg.bits.rptr = 0; ++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_gmac_release_hw_free_q ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static void sl351x_gmac_release_hwtx_q(void) ++{ ++ int i; ++ unsigned int rwptr_addr; ++ ++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ writel(0, rwptr_addr); ++ rwptr_addr+=4; ++ } ++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ writel(0, rwptr_addr); ++ rwptr_addr+=4; ++ } ++} ++#endif ++ ++/*---------------------------------------------------------------------- ++* sl351x_gmac_save_reg ++*----------------------------------------------------------------------*/ ++void sl351x_gmac_save_reg(void) ++{ ++ int i; ++ volatile u32 *destp; ++ unsigned int srce_addr; ++ ++ srce_addr = TOE_GLOBAL_BASE; ++ destp = (volatile u32 *)toe_global_reg; ++ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, destp++, srce_addr+=4) ++ *destp = readl(srce_addr); ++ ++ srce_addr = TOE_GMAC0_DMA_BASE; ++ destp = (volatile u32 *)&toe_dma_reg[0][0]; ++ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4) ++ { ++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38)) ++ srce_addr = (TOE_GMAC0_DMA_BASE+0x50); ++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58)) ++ srce_addr = (TOE_GMAC0_DMA_BASE+0x70); ++ ++ *destp = readl(srce_addr); ++ } ++ srce_addr = TOE_GMAC1_DMA_BASE; ++ destp = (volatile u32 *)&toe_dma_reg[1][0]; ++ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4) ++ { ++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38)) ++ srce_addr = (TOE_GMAC0_DMA_BASE+0x50); ++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58)) ++ srce_addr = (TOE_GMAC0_DMA_BASE+0x70); ++ ++ *destp = readl(srce_addr); ++ } ++ ++ srce_addr = TOE_GMAC0_BASE; ++ destp = (volatile u32 *)&toe_gmac_reg[0][0]; ++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4) ++ *destp = readl(srce_addr); ++ ++ srce_addr = TOE_GMAC1_BASE; ++ destp = (volatile u32 *)&toe_gmac_reg[1][0]; ++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4) ++ *destp = readl(srce_addr); ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_gmac_restore_reg ++*----------------------------------------------------------------------*/ ++void sl351x_gmac_restore_reg(void) ++{ ++ int i; ++ volatile u32 *srcep; ++ unsigned int dest_addr; ++ ++ srcep = (volatile u32 *)&toe_dma_reg[0][0]; ++ dest_addr = TOE_GMAC0_DMA_BASE; ++ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++) ++ { ++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38)) ++ dest_addr = (TOE_GMAC0_DMA_BASE+0x50); ++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58)) ++ dest_addr = (TOE_GMAC0_DMA_BASE+0x70); ++ ++ writel(*srcep, dest_addr); ++ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff); ++ } ++ srcep = (volatile u32 *)&toe_dma_reg[1][0]; ++ dest_addr = TOE_GMAC1_DMA_BASE; ++ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++) ++ { ++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38)) ++ dest_addr = (TOE_GMAC0_DMA_BASE+0x50); ++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58)) ++ dest_addr = (TOE_GMAC0_DMA_BASE+0x70); ++ ++ writel(*srcep, dest_addr); ++ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff); ++ } ++ ++ srcep = (volatile u32 *)&toe_gmac_reg[0][0]; ++ dest_addr = TOE_GMAC0_BASE; ++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++) ++ writel(*srcep, dest_addr); ++ ++ srcep = (volatile u32 *)&toe_gmac_reg[1][0]; ++ dest_addr = TOE_GMAC1_BASE; ++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++) ++ writel(*srcep, dest_addr); ++ ++ srcep = (volatile u32 *)toe_global_reg; ++ dest_addr = TOE_GLOBAL_BASE; ++ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, dest_addr+=4, srcep++) ++ writel(*srcep, dest_addr); ++ ++} ++ ++#ifdef CONFIG_SL351x_NAT ++/*---------------------------------------------------------------------- ++* sl351x_nat_workaround_init ++*----------------------------------------------------------------------*/ ++#define NAT_WORAROUND_DESC_POWER (6) ++#define NAT_WORAROUND_DESC_NUM (2 << NAT_WORAROUND_DESC_POWER) ++dma_addr_t sl351x_nat_workaround_desc_dma; ++void sl351x_nat_workaround_init(void) ++{ ++ unsigned int desc_buf; ++ ++ desc_buf = (unsigned int)DMA_MALLOC((NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T)), ++ (dma_addr_t *)&sl351x_nat_workaround_desc_dma) ; ++ memset((void *)desc_buf, 0, NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T)); ++ ++ // DMA Queue Base & Size ++ writel((sl351x_nat_workaround_desc_dma & DMA_Q_BASE_MASK) | NAT_WORAROUND_DESC_POWER, ++ TOE_GLOBAL_BASE + 0x4080); ++ writel(0, TOE_GLOBAL_BASE + 0x4084); ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_workaround_handler ++*----------------------------------------------------------------------*/ ++#ifndef NAT_WORKAROUND_BY_RESET_GMAC ++static void sl351x_nat_workaround_handler(void) ++{ ++ int i; ++ DMA_RWPTR_T rwptr; ++ GMAC_RXDESC_T *desc_ptr; ++ unsigned int buf_ptr; ++ TOE_INFO_T *toe; ++ GMAC_CONFIG0_T config0; ++ unsigned int rwptr_addr; ++ ++ toe = (TOE_INFO_T *)&toe_private_data; ++ ++ // disable Rx of GMAC-0 & 1 ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 1; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++ ++ // wait GMAC-0 HW Tx finished ++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ rwptr.bits32 = readl(rwptr_addr); ++ if (rwptr.bits.rptr != rwptr.bits.wptr) ++ return; // wait the HW to send packets and release buffers ++ rwptr_addr+=4; ++ } ++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ rwptr.bits32 = readl(rwptr_addr); ++ if (rwptr.bits.rptr != rwptr.bits.wptr) ++ return; // wait the HW to send packets and release buffers ++ rwptr_addr+=4; ++ } ++ ++ // printk("sl351x_nat_workaround_handler %d\n", sl351x_nat_workaround_cnt); ++ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base; ++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma; ++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++) ++ { ++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE; ++ desc_ptr->word1.bits.sw_id = i; ++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr; ++ desc_ptr++; ++ buf_ptr += HW_RX_BUF_SIZE; ++ } ++ rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++ rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM); ++ writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG); ++ writel(0, TOE_GLOBAL_BASE + 0x4084); ++ ++ // Enable Rx of GMAC-0 & 1 ++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); ++ config0.bits.dis_rx = 0; ++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); ++} ++#endif ++#endif // CONFIG_SL351x_NAT ++ ++#endif // SL351x_GMAC_WORKAROUND ++ ++/* get the mac addresses from flash ++ *can't do this in module_init because mtd driver is initialized after ethernet ++ */ ++static __init int sl351x_mac_address_init(void) ++{ ++ GMAC_INFO_T *tp; ++ struct sockaddr sock; ++ int i; ++ ++ /* get mac address from FLASH */ ++ gmac_get_mac_address(); ++ ++ for (i = 0; i < GMAC_NUM; i++) { ++ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i]; ++ memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6); ++ gmac_set_mac_address(tp->dev,(void *)&sock); ++ } ++ ++ return 0; ++} ++late_initcall(sl351x_mac_address_init); ++ ++ +Index: linux-2.6.23.16/drivers/net/sl351x_hash.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_hash.c 2008-03-15 16:59:32.361970401 +0200 +@@ -0,0 +1,713 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl351x_hash.c ++* Description : ++* Handle Storlink SL351x Hash Functions ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* 03/13/2006 Gary Chen Create and implement ++* ++****************************************************************************/ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/it8712.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/skbuff.h> ++#include <linux/in.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#include <linux/list.h> ++#define MIDWAY ++#define SL_LEPUS ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <asm/arch/sl351x_hash_cfg.h> ++ ++#ifndef RXTOE_DEBUG ++#define RXTOE_DEBUG ++#endif ++#undef RXTOE_DEBUG ++ ++/*---------------------------------------------------------------------- ++* Definition ++*----------------------------------------------------------------------*/ ++#define hash_printf printk ++ ++#define HASH_TIMER_PERIOD (30) // seconds ++#define HASH_ILLEGAL_INDEX 0xffff ++ ++/*---------------------------------------------------------------------- ++* Variables ++*----------------------------------------------------------------------*/ ++u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32]; ++char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16))); ++static struct timer_list hash_timer_obj; ++LIST_HEAD(hash_timeout_list); ++ ++/*---------------------------------------------------------------------- ++* Functions ++*----------------------------------------------------------------------*/ ++void dm_long(u32 location, int length); ++static void hash_timer_func(u32 data); ++ ++/*---------------------------------------------------------------------- ++* hash_init ++*----------------------------------------------------------------------*/ ++void sl351x_hash_init(void) ++{ ++ int i; ++ volatile u32 *dp1, *dp2, dword; ++ ++ dp1 = (volatile u32 *) TOE_V_BIT_BASE; ++ dp2 = (volatile u32 *) TOE_A_BIT_BASE; ++ ++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++) ++ { ++ *dp1++ = 0; ++ dword = *dp2++; // read-clear ++ } ++ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits)); ++ memset((void *)&hash_tables, 0, sizeof(hash_tables)); ++ ++ init_timer(&hash_timer_obj); ++ hash_timer_obj.expires = jiffies + (HASH_TIMER_PERIOD * HZ); ++ hash_timer_obj.data = (unsigned long)&hash_timer_obj; ++ hash_timer_obj.function = (void *)&hash_timer_func; ++ add_timer(&hash_timer_obj); ++ ++#if (HASH_MAX_BYTES == 128) ++ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words ++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG); ++#elif (HASH_MAX_BYTES == 64) ++ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words ++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG); ++#else ++ #error Incorrect setting for HASH_MAX_BYTES ++#endif ++ ++} ++/*---------------------------------------------------------------------- ++* hash_add_entry ++*----------------------------------------------------------------------*/ ++int hash_add_entry(HASH_ENTRY_T *entry) ++{ ++ int rc; ++ u32 key[HASH_MAX_DWORDS]; ++ rc = hash_build_keys((u32 *)&key, entry); ++ if (rc < 0) ++ return -1; ++ hash_write_entry(entry, (unsigned char*) &key[0]); ++// hash_set_valid_flag(entry->index, 1); ++// printk("Dump hash key!\n"); ++// dump_hash_key(entry); ++ return entry->index; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_set_valid_flag ++*----------------------------------------------------------------------*/ ++void hash_set_valid_flag(int index, int valid) ++{ ++ register u32 reg32; ++ ++ reg32 = TOE_V_BIT_BASE + (index/32) * 4; ++ ++ if (valid) ++ { ++ writel(readl(reg32) | (1 << (index%32)), reg32); ++ } ++ else ++ { ++ writel(readl(reg32) & ~(1 << (index%32)), reg32); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* hash_set_nat_owner_flag ++*----------------------------------------------------------------------*/ ++void hash_set_nat_owner_flag(int index, int valid) ++{ ++ if (valid) ++ { ++ hash_nat_owner_bits[index/32] |= (1 << (index % 32)); ++ } ++ else ++ { ++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32)); ++ } ++} ++ ++ ++/*---------------------------------------------------------------------- ++* hash_build_keys ++*----------------------------------------------------------------------*/ ++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry) ++{ ++ u32 data; ++ unsigned char *cp; ++ int i, j; ++ unsigned short index; ++ int total; ++ ++ memset((void *)destp, 0, HASH_MAX_BYTES); ++ cp = (unsigned char *)destp; ++ ++ if (entry->key_present.port || entry->key_present.Ethertype) ++ { ++ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0 ++ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2 ++ HASH_PUSH_BYTE(cp, 0); // Byte 3 ++ } ++ else ++ { ++ HASH_PUSH_DWORD(cp, 0); ++ } ++ ++ if (entry->key_present.da || entry->key_present.sa) ++ { ++ unsigned char mac[4]; ++ if (entry->key_present.da) ++ { ++ for (i=0; i<4; i++) ++ HASH_PUSH_BYTE(cp, entry->key.da[i]); ++ } ++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0; ++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0; ++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0; ++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0; ++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24); ++ HASH_PUSH_DWORD(cp, data); ++ if (entry->key_present.sa) ++ { ++ for (i=2; i<6; i++) ++ HASH_PUSH_BYTE(cp, entry->key.sa[i]); ++ } ++ } ++ ++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id) ++ { ++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word ++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word ++ } ++ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0 ++ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1 ++ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2 ++ HASH_PUSH_BYTE(cp, 0); // Byte 3 ++ } ++ ++ if (entry->key_present.ipv6_flow_label) ++ { ++ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word ++ } ++ if (entry->key_present.sip) ++ { ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[i]); ++ if (entry->key.ipv6) ++ { ++ for (i=4; i<16; i+=4) ++ { ++ for (j=i+3; j>=i; j--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[j]); ++ } ++ } ++ } ++ if (entry->key_present.dip) ++ { ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[i]); ++ if (entry->key.ipv6) ++ { ++ for (i=4; i<16; i+=4) ++ { ++ for (j=i+3; j>=i; j--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[j]); ++ } ++ } ++ } ++ ++ if (entry->key_present.l4_bytes_0_3) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]); ++ } ++ if (entry->key_present.l4_bytes_4_7) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]); ++ } ++ if (entry->key_present.l4_bytes_8_11) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]); ++ } ++ if (entry->key_present.l4_bytes_12_15) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]); ++ } ++ if (entry->key_present.l4_bytes_16_19) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]); ++ } ++ if (entry->key_present.l4_bytes_20_23) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]); ++ } ++ if (entry->key_present.l7_bytes_0_3) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]); ++ } ++ if (entry->key_present.l7_bytes_4_7) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]); ++ } ++ if (entry->key_present.l7_bytes_8_11) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]); ++ } ++ if (entry->key_present.l7_bytes_12_15) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]); ++ } ++ if (entry->key_present.l7_bytes_16_19) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]); ++ } ++ if (entry->key_present.l7_bytes_20_23) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]); ++ } ++ ++ // get hash index ++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32)); ++ ++ if (total > HASH_MAX_KEY_DWORD) ++ { ++ //hash_printf("Total key words (%d) is too large (> %d)!\n", ++ // total, HASH_MAX_KEY_DWORD); ++ return -1; ++ } ++ ++ if (entry->key_present.port || entry->key_present.Ethertype) ++ index = hash_gen_crc16((unsigned char *)destp, total * 4); ++ else ++ { ++ if (total == 1) ++ { ++ hash_printf("No key is assigned!\n"); ++ return -1; ++ } ++ ++ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4); ++ } ++ ++ entry->index = index & HASH_BITS_MASK; ++ ++ //hash_printf("Total key words = %d, Hash Index= %d\n", ++ // total, entry->index); ++ ++ cp = (unsigned char *)destp; ++ cp+=3; ++ HASH_PUSH_BYTE(cp, entry->rule); // rule ++ ++ entry->total_dwords = total; ++ ++ return total; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_build_nat_keys ++*----------------------------------------------------------------------*/ ++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry) ++{ ++ unsigned char *cp; ++ int i; ++ unsigned short index; ++ int total; ++ ++ memset((void *)destp, 0, HASH_MAX_BYTES); ++ ++ cp = (unsigned char *)destp + 2; ++ HASH_PUSH_BYTE(cp, entry->key.port); ++ cp++; ++ ++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id) ++ { ++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word ++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word ++ } ++ ++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); ++ cp+=3; ++ ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[i]); ++ ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[i]); ++ ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]); ++ ++ // get hash index ++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32)); ++ ++ index = hash_gen_crc16((unsigned char *)destp, total * 4); ++ entry->index = index & ((1 << HASH_BITS) - 1); ++ ++ cp = (unsigned char *)destp; ++ cp+=3; ++ HASH_PUSH_BYTE(cp, entry->rule); // rule ++ ++ entry->total_dwords = total; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_build_toe_keys ++*----------------------------------------------------------------------*/ ++int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry) ++{ ++ unsigned long data; ++ unsigned char *cp; ++ unsigned short index; ++ int i; ++ int total; ++ //printk("%s\n", __func__); ++ memset((void*)destp, 0, HASH_MAX_BYTES); ++ cp = (unsigned char*)destp; ++ ++ if(entry->key_present.port || entry->key_present.Ethertype) { ++ data = (entry->key.port << 16) + entry->key.Ethertype; ++ HASH_PUSH_DWORD(cp, data); ++ } else ++ HASH_PUSH_DWORD(cp, 0); ++ ++ if (entry->key_present.da || entry->key_present.sa) { ++ unsigned char mac[4]; ++ if (entry->key_present.da) { ++ data = (entry->key.da[0]) + (entry->key.da[1] << 8) + ++ (entry->key.da[2] << 16) + (entry->key.da[3] <<24); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0; ++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0; ++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0; ++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0; ++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24); ++ HASH_PUSH_DWORD(cp, data); ++ if (entry->key_present.sa) { ++ data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) + ++ (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ } ++ ++ if (entry->key_present.ip_protocol) { ++ unsigned char ip_protocol; ++ ip_protocol = entry->key.ip_protocol; ++ data = ip_protocol; ++ HASH_PUSH_DWORD(cp, data); ++ } ++ ++ if (entry->key_present.ipv6_flow_label) { ++ unsigned long flow_label; ++ flow_label = entry->key.ipv6_flow_label; ++ data = flow_label & 0xfffff; ++ HASH_PUSH_DWORD(cp, data); ++ } ++ ++ if (entry->key_present.sip) { ++ { ++ data = IPIV(entry->key.sip[0], entry->key.sip[1], ++ entry->key.sip[2], entry->key.sip[3]); ++ HASH_PUSH_DWORD(cp, data); ++ if (entry->key.ipv6) { ++ for (i=4; i<16; i+=4) { ++ data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1], ++ entry->key.sip[i+2], entry->key.sip[i+3]); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ } ++ } ++ } ++ ++ if (entry->key_present.dip) { ++ { ++ data = IPIV(entry->key.dip[0], entry->key.dip[1], ++ entry->key.dip[2], entry->key.dip[3]); ++ HASH_PUSH_DWORD(cp, data); ++ if (entry->key.ipv6) { ++ for (i=4; i<16; i+=4) { ++ data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1], ++ entry->key.dip[i+2], entry->key.dip[i+3]); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ } ++ } ++ } ++ if (entry->key_present.l4_bytes_0_3) ++ { ++ unsigned char *datap; ++ datap = &entry->key.l4_bytes[0]; ++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ if (entry->key_present.l7_bytes_0_3) ++ { ++ unsigned char *datap; ++ datap = &entry->key.l7_bytes[0]; ++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ if (entry->key_present.l7_bytes_4_7) ++ { ++ unsigned char *datap; ++ datap = &entry->key.l7_bytes[4]; ++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24); ++ HASH_PUSH_DWORD(cp, data); ++ } ++ ++ total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32)); ++ if (total > HASH_MAX_KEY_DWORD) { ++ //printf("Total key words (%d) is too large (> %d)!\n", ++ // total, HASH_MAX_KEY_DWORD); ++ return -1; ++ } ++ index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4); ++ entry->index = index & ((1 << HASH_BITS)-1); ++ ++ cp = (unsigned char*) destp; ++ cp += 3; ++ HASH_PUSH_BYTE(cp, entry->rule); ++ entry->total_dwords = total; ++ return total; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_add_toe_entry ++*----------------------------------------------------------------------*/ ++int hash_add_toe_entry(HASH_ENTRY_T *entry) ++{ ++ int rc; ++ u32 key[HASH_MAX_DWORDS]; ++ ++ rc = hash_build_toe_keys((u32 *)&key, entry); ++ if (rc < 0) ++ return -1; ++ hash_write_entry(entry, (unsigned char*) &key[0]); ++ //hash_dump_entry(entry->index); ++// hash_set_valid_flag(entry->index, 1); ++// printk("Dump hash key!\n"); ++// dump_hash_key(entry); ++ return entry->index; ++} ++ ++ ++/*---------------------------------------------------------------------- ++* hash_write_entry ++*----------------------------------------------------------------------*/ ++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key) ++{ ++ int i; ++ u32 *srcep, *destp, *destp2; ++ ++ srcep = (u32 *)key; ++ destp2 = destp = (u32 *)&hash_tables[entry->index][0]; ++ ++ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++) ++ *destp = *srcep; ++ ++ srcep = (u32 *)&entry->action; ++ *destp++ = *srcep; ++ ++ srcep = (u32 *)&entry->param; ++ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++) ++ *destp = *srcep; ++ ++ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32)); ++ ++ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE); ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_timer_func ++*----------------------------------------------------------------------*/ ++static void hash_timer_func(u32 data) ++{ ++ int i, j, idx; ++ volatile u32 *own_p, *valid_p; ++ u32 own_bits, a_bits; ++ int period = HASH_TIMER_PERIOD; ++ ++ valid_p = (volatile u32 *)TOE_V_BIT_BASE; ++ own_p = (volatile u32 *)hash_nat_owner_bits; ++ for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32) ++ { ++ a_bits = readl(TOE_A_BIT_BASE + (i*4)); ++ own_bits = *own_p; ++ if (own_bits) ++ { ++ for (j=0; own_bits && j<32; j++) ++ { ++ if (own_bits & 1) ++ { ++ short *counter_p, *interval_p; ++ NAT_HASH_ENTRY_T *nat_entry; ++ GRE_HASH_ENTRY_T *gre_entry; ++ nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j); ++ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry; ++ if (nat_entry->key.ip_protocol == IPPROTO_GRE) ++ { ++ counter_p = (short *)&gre_entry->tmo.counter; ++ interval_p = (short *)&gre_entry->tmo.interval; ++ } ++ else ++ { ++ counter_p = (short *)&nat_entry->tmo.counter; ++ interval_p = (short *)&nat_entry->tmo.interval; ++ } ++ if (a_bits & 1) ++ { ++ *counter_p = *interval_p; ++ } ++ else ++ { ++ *counter_p -= HASH_TIMER_PERIOD; ++ if (*counter_p <= 0) ++ { ++ *valid_p &= ~(1 << j); // invalidate it ++ *own_p &= ~(1 << j); // release ownership for NAT ++ *counter_p = 0; ++ // hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j); ++ } ++ else if (period > *counter_p) ++ { ++ period = *counter_p; ++ } ++ } ++ } ++ a_bits >>= 1; ++ own_bits >>=1; ++ } ++ } ++ } ++ ++ hash_timer_obj.expires = jiffies + (period * HZ); ++ add_timer((struct timer_list *)data); ++} ++ ++/*---------------------------------------------------------------------- ++* dm_long ++*----------------------------------------------------------------------*/ ++void dm_long(u32 location, int length) ++{ ++ u32 *start_p, *curr_p, *end_p; ++ u32 *datap, data; ++ int i; ++ ++ //if (length > 1024) ++ // length = 1024; ++ ++ start_p = (u32 *)location; ++ end_p = (u32 *)location + length; ++ curr_p = (u32 *)((u32)location & 0xfffffff0); ++ datap = (u32 *)location; ++ while (curr_p < end_p) ++ { ++ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0); ++ for (i=0; i<4; i++) ++ { ++ if (curr_p < start_p || curr_p >= end_p) ++ hash_printf(" "); ++ else ++ { ++ data = *datap; ++ hash_printf("%08X ", data); ++ } ++ if (i==1) ++ hash_printf("- "); ++ ++ curr_p++; ++ datap++; ++ } ++ hash_printf("\n"); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* hash_dump_entry ++*----------------------------------------------------------------------*/ ++void hash_dump_entry(int index) ++{ ++ hash_printf("Hash Index %d:\n", index); ++ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS); ++} ++ ++ +Index: linux-2.6.23.16/drivers/net/sl351x_nat.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_nat.c 2008-03-15 16:59:39.862397640 +0200 +@@ -0,0 +1,1736 @@ ++/**************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*---------------------------------------------------------------------------- ++* Name : sl351x_nat.c ++* Description : ++* Handle Storlink SL351x NAT Functions ++* ++* ++* Packet Flow: ++* ++* (xmit)+<--- SW NAT -->+(xmit) ++* | ^^ | ++* | || | ++* | || | ++* Client <---> GMAC-x HW-NAT GMAC-y <---> Server ++* ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* 03/13/2006 Gary Chen Create and implement ++* ++* ++****************************************************************************/ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/it8712.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/skbuff.h> ++#include <linux/if_ether.h> ++#include <linux/if_pppox.h> ++#include <linux/in.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#include <linux/udp.h> ++#include <linux/ppp_defs.h> ++ ++#define MIDWAY ++#define SL_LEPUS ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <asm/arch/sl351x_hash_cfg.h> ++#include <asm/arch/sl351x_nat_cfg.h> ++#ifdef CONFIG_NETFILTER ++#include <linux/netfilter_ipv4/ip_conntrack.h> ++#include <linux/netfilter_ipv4/ip_conntrack_tcp.h> ++#endif ++ ++//#define NAT_DEBUG_MSG 1 ++#define _NOT_CHECK_SIP_DIP ++//#define SL351x_NAT_TEST_BY_SMARTBITS 1 // Initialize 32 hash entries and test by SmartBITS ++#define VITESSE_G5SWITCH 1 ++ ++#ifdef CONFIG_SL351x_NAT ++ ++/*---------------------------------------------------------------------- ++* Definition ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL3516_ASIC ++#define CONFIG_SL351x_NAT_TCP_UDP ++#define CONFIG_SL351x_NAT_GRE ++#define CONFIG_SL351x_TCP_UDP_RULE_ID 0 ++#define CONFIG_SL351x_GRE_RULE_ID 1 ++#else ++#define CONFIG_SL351x_NAT_TCP_UDP ++//#define CONFIG_SL351x_NAT_GRE ++#define CONFIG_SL351x_TCP_UDP_RULE_ID 0 ++#define CONFIG_SL351x_GRE_RULE_ID 0 ++#endif ++ ++#define nat_printf printk ++#define NAT_FTP_CTRL_PORT (21) // TCP ++#define NAT_H323_PORT (1720) // TCP ++#define NAT_T120_PORT (1503) // TCP ++#define NAT_PPTP_PORT (1723) // TCP ++#define NAT_TFTP_PORT (69) // UDP ++#define NAT_DNS_PORT (53) // UDP ++#define NAT_NTP_PORT (123) // UDP ++#define NAT_RAS_PORT (1719) // UDP ++#define NAT_BOOTP67_PORT (67) // UDP ++#define NAT_BOOTP68_PORT (68) // UDP ++ ++#define NAT_TCP_PORT_MAX 64 ++#define NAT_UDP_PORT_MAX 64 ++ ++#define GRE_PROTOCOL (0x880b) ++#define GRE_PROTOCOL_SWAP __constant_htons(0x880b) ++ ++#ifdef VITESSE_G5SWITCH ++extern int Giga_switch; ++#endif ++ ++typedef struct ++{ ++ u16 flags_ver; ++ u16 protocol; ++ u16 payload_length; ++ u16 call_id; ++ u32 seq; ++ u32 ack; ++} GRE_PKTHDR_T; ++ ++/*---------------------------------------------------------------------- ++* NAT Configuration ++* ++* Note: Any change for network setting, the NAT configuration should ++* be changed also. ++* cfg->lan_port 0 if GMAC-0, 1: if GMAC-1 ++* cfg->wan_port 0 if GMAC-0, 1: if GMAC-1 ++* cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask ++* cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask ++* ++*----------------------------------------------------------------------*/ ++NAT_CFG_T nat_cfg; ++static int nat_initialized; ++u32 nat_collision; ++ ++#ifdef CONFIG_SL351x_NAT_TCP_UDP ++static u16 fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT, ++ NAT_H323_PORT, ++ // NAT_T120_PORT, ++ NAT_PPTP_PORT, ++ 0}; ++static u16 fixed_udp_port_list[]={NAT_DNS_PORT, ++ NAT_NTP_PORT, ++ NAT_TFTP_PORT, ++ NAT_RAS_PORT, ++ NAT_BOOTP67_PORT, ++ NAT_BOOTP68_PORT, ++ 0}; ++#endif ++ ++// #define _HAVE_DYNAMIC_PORT_LIST ++#ifdef _HAVE_DYNAMIC_PORT_LIST ++static u16 dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1]; ++static u16 dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]}; ++#endif ++ ++/*---------------------------------------------------------------------- ++* Functions ++*----------------------------------------------------------------------*/ ++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port); ++int sl351x_nat_udp_output(struct sk_buff *skb, int port); ++int sl351x_nat_gre_output(struct sk_buff *skb, int port); ++ ++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2); ++extern void hash_dump_entry(int index); ++extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight); ++extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight); ++ ++#ifdef SL351x_NAT_TEST_BY_SMARTBITS ++static void nat_init_test_entry(void); ++#endif ++/*---------------------------------------------------------------------- ++* sl351x_nat_init ++* initialize a NAT matching rule ++* Called by SL351x Driver ++* key : port, protocol, Sip, Dip, Sport, Dport ++* Action : Srce Q: HW Free Queue, ++* Dest Q: HW TxQ ++* Change DA ++* Change SA ++* Change Sip or Dip ++* Change Sport or Dport ++*----------------------------------------------------------------------*/ ++void sl351x_nat_init(void) ++{ ++ int rc; ++ GMAC_MRxCR0_T mrxcr0; ++ GMAC_MRxCR1_T mrxcr1; ++ GMAC_MRxCR2_T mrxcr2; ++ NAT_CFG_T *cfg; ++ ++ if (nat_initialized) ++ return; ++ ++ nat_initialized = 1; ++ ++ if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) || ++ (sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES)) ++ { ++ nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n"); ++ while(1); ++ } ++ ++ cfg = (NAT_CFG_T *)&nat_cfg; ++ memset((void *)cfg, 0, sizeof(NAT_CFG_T)); ++#ifdef _HAVE_DYNAMIC_PORT_LIST ++ memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list)); ++ memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list)); ++#endif ++ ++#ifdef VITESSE_G5SWITCH ++ if(Giga_switch) ++ { ++ cfg->enabled = 1; ++ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID; ++ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID; ++ cfg->lan_port = 1; ++ cfg->wan_port = 0; ++ cfg->default_hw_txq = 3; ++ cfg->tcp_tmo_interval = 60; ++ cfg->udp_tmo_interval = 180; ++ cfg->gre_tmo_interval = 60; ++ } ++ else ++ { ++ cfg->enabled = 1; ++ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID; ++ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID; ++ cfg->lan_port = 0; ++ cfg->wan_port = 1; ++ cfg->default_hw_txq = 3; ++ cfg->tcp_tmo_interval = 60; ++ cfg->udp_tmo_interval = 180; ++ cfg->gre_tmo_interval = 60; ++ ++ } ++#endif ++ ++#if 1 // debug purpose ++ cfg->ipcfg[0].total = 1; ++ cfg->ipcfg[0].entry[0].ipaddr = IPIV(192,168,2,92); ++ cfg->ipcfg[0].entry[0].netmask = IPIV(255,255,255,0); ++ cfg->ipcfg[1].total = 1; ++ cfg->ipcfg[1].entry[0].ipaddr = IPIV(192,168,1,200); ++ cfg->ipcfg[1].entry[0].netmask = IPIV(255,255,255,0); ++#endif ++ ++#if 1 ++ cfg->xport.total = 0; ++#else ++ cfg->xport.total = 4; ++ ++ // H.323/H.225 Call setup ++ cfg->xport.entry[0].protocol = IPPROTO_TCP; ++ cfg->xport.entry[0].sport_start = 0; ++ cfg->xport.entry[0].sport_end = 0; ++ cfg->xport.entry[0].dport_start = 1720; ++ cfg->xport.entry[0].dport_end = 1720; ++ cfg->xport.entry[1].protocol = IPPROTO_TCP; ++ cfg->xport.entry[1].sport_start = 1720; ++ cfg->xport.entry[1].sport_end = 1720; ++ cfg->xport.entry[1].dport_start = 0; ++ cfg->xport.entry[1].dport_end = 0; ++ ++ // RAS Setup ++ cfg->xport.entry[2].protocol = IPPROTO_UDP; ++ cfg->xport.entry[2].sport_start = 0; ++ cfg->xport.entry[2].sport_end = 0; ++ cfg->xport.entry[2].dport_start = 1719; ++ cfg->xport.entry[2].dport_end = 1719; ++ cfg->xport.entry[3].protocol = IPPROTO_UDP; ++ cfg->xport.entry[3].sport_start = 1719; ++ cfg->xport.entry[3].sport_end = 1719; ++ cfg->xport.entry[3].dport_start = 0; ++ cfg->xport.entry[3].dport_end = 0; ++#endif ++ ++#ifdef CONFIG_SL351x_NAT_TCP_UDP ++ mrxcr0.bits32 = 0; ++ mrxcr1.bits32 = 0; ++ mrxcr2.bits32 = 0; ++ mrxcr0.bits.port = 1; ++ mrxcr0.bits.l3 = 1; ++ mrxcr0.bits.l4 = 1; ++ mrxcr1.bits.sip = 1; ++ mrxcr1.bits.dip = 1; ++ mrxcr1.bits.l4_byte0_15 = 0x0f; // Byte 0-3 ++ mrxcr0.bits.sprx = 3; ++ ++ rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32); ++ if (rc < 0) ++ { ++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id); ++ } ++ ++ if (cfg->lan_port != cfg->wan_port) ++ { ++ rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32); ++ if (rc < 0) ++ { ++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id); ++ } ++ } ++#endif ++ ++#ifdef CONFIG_SL351x_NAT_GRE ++ mrxcr0.bits32 = 0; ++ mrxcr1.bits32 = 0; ++ mrxcr2.bits32 = 0; ++ mrxcr0.bits.port = 1; ++ mrxcr0.bits.l3 = 1; ++ mrxcr0.bits.l4 = 1; ++ mrxcr1.bits.sip = 1; ++ mrxcr1.bits.dip = 1; ++ mrxcr1.bits.l4_byte0_15 = 0xcc; // Byte 2, 3, 6, 7 ++ mrxcr0.bits.sprx = 4; // see GMAC driver about SPR ++ ++ rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32); ++ if (rc < 0) ++ { ++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id); ++ } ++ ++ if (cfg->lan_port != cfg->wan_port) ++ { ++ rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32); ++ if (rc < 0) ++ { ++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id); ++ } ++ } ++#endif ++ ++#ifdef SL351x_NAT_TEST_BY_SMARTBITS ++ nat_init_test_entry(); ++#endif ++} ++ ++/*---------------------------------------------------------------------- ++* nat_build_keys ++* Note: To call this routine, the key->rule_id MUST be zero ++*----------------------------------------------------------------------*/ ++static inline int nat_build_keys(NAT_KEY_T *key) ++{ ++ return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK; ++} ++ ++/*---------------------------------------------------------------------- ++* gre_build_keys ++* Note: To call this routine, the key->rule_id MUST be zero ++*----------------------------------------------------------------------*/ ++static inline int gre_build_keys(GRE_KEY_T *key) ++{ ++ return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK; ++} ++ ++/*---------------------------------------------------------------------- ++* nat_write_hash_entry ++*----------------------------------------------------------------------*/ ++static inline int nat_write_hash_entry(int index, void *hash_entry) ++{ ++ int i; ++ u32 *srcep, *destp, *destp2; ++ ++ srcep = (u32 *)hash_entry; ++ destp = destp2 = (u32 *)&hash_tables[index][0]; ++ ++ for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++) ++ *destp++ = *srcep++; ++ ++ consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE); ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* gre_write_hash_entry ++*----------------------------------------------------------------------*/ ++static inline int gre_write_hash_entry(int index, void *hash_entry) ++{ ++ int i; ++ u32 *srcep, *destp, *destp2; ++ ++ srcep = (u32 *)hash_entry; ++ destp = destp2 = (u32 *)&hash_tables[index][0]; ++ ++ for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++) ++ *destp++ = *srcep++; ++ ++ consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE); ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_find_ipcfg ++* return NULL if not found ++*----------------------------------------------------------------------*/ ++static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port) ++{ ++ int i; ++ NAT_IP_ENTRY_T *ipcfg; ++ ++ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0]; ++ for (i=0; i<nat_cfg.ipcfg[port].total; i++, ipcfg++) ++ { ++ if (ipaddr == ipcfg->ipaddr) ++ { ++ return ipcfg; ++ } ++ } ++ return NULL; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_assign_qid ++*----------------------------------------------------------------------*/ ++static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport) ++{ ++ int i, total, qid; ++ NAT_WRULE_ENTRY_T *entry; ++ ++ for (qid = 0; qid<CONFIG_NAT_TXQ_NUM; qid++) ++ { ++ if (qid == nat_cfg.default_hw_txq) ++ continue; ++ ++ entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0]; ++ total = nat_cfg.wrule[qid].total; ++ for (i=0; i<total; i++, entry++) ++ { ++ if (!entry->protocol || entry->protocol==proto) ++ { ++ //if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start) ++ // continue; // UI take care ++ if (entry->sip_start && !((sip >= entry->sip_start) && ++ (sip <= entry->sip_end))) ++ continue; ++ if (entry->dip_start && !((dip >= entry->dip_start) && ++ (dip <= entry->dip_end))) ++ continue; ++ if (entry->sport_start && !((sport >= entry->sport_start) && ++ (sport <= entry->sport_end))) ++ continue; ++ if (entry->dport_start && !((dport >= entry->dport_start) ++ && (dport <= entry->dport_end))) ++ continue; ++ return qid; ++ } ++ } ++ } ++ return nat_cfg.default_hw_txq; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_input ++* Handle NAT input frames ++* Called by SL351x Driver - Handle Default Rx Queue ++* Notes: The caller must make sure that the l3off & l4offset should not be zero. ++* SL351x NAT Frames should meet the following conditions: ++* 1. TCP or UDP frame ++* 2. Cannot be special ALGs ports which TCP/UDP data is updated ++* 3. LAN-IN Frames: ++* Source IP is in the LAN subnet and Destination is not in the LAN subnet ++* 4. WAN-IN Frames ++* Destination IP is in the WAN port IP ++* ++* Example Ports ++* 1. TCP/UDP data is updated ++* (a) FTP Control Packet ++* (b) VoIP Packets ++* (c) etc. (add in future) ++* 2. UDP Low packet rate, not worth ++* (b) TFTP Destination Port is 69 ++* (b) DNS 53 ++* (c) NTP 123 ++* (d) etc. (add in future) ++*----------------------------------------------------------------------*/ ++void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off) ++{ ++ int i, found; ++ u32 sip, dip; ++ u16 sport, dport; ++ struct ethhdr *ether_hdr; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ struct pppoe_hdr *pppoe_hdr; ++ NAT_CB_T *nat_cb; ++ u8 proto, pppoe_frame=0; ++ NAT_CFG_T *cfg; ++ u16 ppp_proto; ++ NAT_IP_ENTRY_T *ipcfg; ++ NAT_XPORT_ENTRY_T *xentry; ++ GRE_PKTHDR_T *gre_hdr; ++#ifdef CONFIG_SL351x_NAT_TCP_UDP ++ u16 *port_ptr; ++#endif ++ ++ cfg = (NAT_CFG_T *)&nat_cfg; ++ if (!cfg->enabled || !cfg->ipcfg[port].total) ++ return; ++ ++ ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]); ++ proto = ip_hdr->protocol; ++ ++ tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]); ++ gre_hdr = (GRE_PKTHDR_T *)tcp_hdr; ++ sport = ntohs(tcp_hdr->source); ++ dport = ntohs(tcp_hdr->dest); ++ ++ sip = ntohl(ip_hdr->saddr); ++ dip = ntohl(ip_hdr->daddr); ++ ++ if (dip == IPIV(255,255,255,255)) ++ return; ++ ++ if (port == cfg->lan_port) ++ { ++ ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0]; ++ for (i=0, found=0; i<cfg->ipcfg[port].total; i++, ipcfg++) ++ { ++ u32 subnet = ipcfg->ipaddr & ipcfg->netmask; ++ if (((sip & ipcfg->netmask) == subnet) && ++ ((dip & ipcfg->netmask) != subnet)) ++ { ++ found = 1; ++ break; ++ } ++ } ++ if (!found) ++ return; ++ } ++ else ++ { ++#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address ++ if (!sl351x_nat_find_ipcfg(dip, port)) ++ { ++ printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip)); ++ return; ++ } ++#endif ++ ether_hdr = (struct ethhdr *)skb->data; ++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1); ++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0]; ++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864 ++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21 ++ { ++ pppoe_frame = 1; ++ } ++ } ++ ++#ifdef CONFIG_SL351x_NAT_TCP_UDP ++ if (proto == IPPROTO_TCP) ++ { ++#ifdef NAT_DEBUG_MSG ++ nat_printf("From GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]", ++ port, ntohs(ip_hdr->id), ++ NIPQUAD(ip_hdr->saddr), sport, ++ NIPQUAD(ip_hdr->daddr), dport); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK"); ++ nat_printf("\n"); ++#endif ++ // if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)) ++ if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)) ++ { ++ return; ++ } ++ port_ptr = fixed_tcp_port_list; ++ for (i=0; *port_ptr; i++, port_ptr++) ++ { ++ if (sport == *port_ptr || dport == *port_ptr) ++ return; ++ } ++#ifdef _HAVE_DYNAMIC_PORT_LIST ++ port_ptr = dynamic_tcp_port_list; ++ for (i=0; *port_ptr; i++, port_ptr++) ++ { ++ if (sport == *port_ptr || dport == *port_ptr) ++ return; ++ } ++#endif ++ } ++ else if (proto == IPPROTO_UDP) ++ { ++#ifdef NAT_DEBUG_MSG ++ nat_printf("From GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]", ++ port, ntohs(ip_hdr->id), ++ NIPQUAD(ip_hdr->saddr), sport, ++ NIPQUAD(ip_hdr->daddr), dport); ++ nat_printf("\n"); ++#endif ++ port_ptr = fixed_udp_port_list; ++ for (i=0; *port_ptr; i++, port_ptr++) ++ { ++ if (sport == *port_ptr || dport == *port_ptr) ++ return; ++ } ++#ifdef _HAVE_DYNAMIC_PORT_LIST ++ port_ptr = dynamic_udp_port_list; ++ for (i=0; *port_ptr; i++, port_ptr++) ++ { ++ if (sport == *port_ptr || dport == *port_ptr) ++ return; ++ } ++#endif ++ } ++ else ++#endif // CONFIG_SL351x_NAT_TCP_UDP ++#ifdef CONFIG_SL351x_NAT_GRE ++ if (proto == IPPROTO_GRE) ++ { ++ if (gre_hdr->protocol != GRE_PROTOCOL_SWAP) ++ return; ++#ifdef NAT_DEBUG_MSG ++ nat_printf("From GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d", ++ port, ntohs(ip_hdr->id), ++ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id), ++ NIPQUAD(ip_hdr->daddr)); ++ nat_printf("\n"); ++#endif ++ } ++ else ++#endif ++ return; ++ ++ ++ // check xport list ++ xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0]; ++ for (i=0; i<cfg->xport.total; i++, xentry++) ++ { ++ if (!xentry->protocol || xentry->protocol == proto) ++ { ++ //if (!xentry->sport_start && !xentry->dport_start) // UI take care ++ // continue; ++ if (xentry->sport_start && !((sport >= xentry->sport_start) && ++ (sport <= xentry->sport_end))) ++ continue; ++ if (xentry->dport_start && !((dport >= xentry->dport_start) ++ && (dport <= xentry->dport_end))) ++ continue; ++ return; ++ } ++ } ++ ++ nat_cb = NAT_SKB_CB(skb); ++ if (((u32)nat_cb & 3)) ++ { ++ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__); ++ return; ++ } ++ nat_cb->tag = NAT_CB_TAG; ++ memcpy(nat_cb->sa, skb->data+6, 6); ++ nat_cb->sip = ip_hdr->saddr; ++ nat_cb->dip = ip_hdr->daddr; ++ if (proto == IPPROTO_GRE) ++ { ++ nat_cb->sport = gre_hdr->protocol; ++ nat_cb->dport = gre_hdr->call_id; ++ } ++ else ++ { ++ nat_cb->sport = tcp_hdr->source; ++ nat_cb->dport = tcp_hdr->dest; ++ } ++ nat_cb->pppoe_frame = pppoe_frame; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_output ++* Handle NAT output frames ++* Called by SL351x Driver - Transmit ++* ++* 1. If not SL351x NAT frames, return FALSE ++* 2. LAN-to-WAN frames ++* (1) Sip must be WAN IP ++* 3. If TCP SY/RST/FIN frame, return ++* 4. Build the hash key and get the hash index ++* 5. If V-Bit is ON, return. ++* 6. Write hash entry and validate it ++* ++*----------------------------------------------------------------------*/ ++int sl351x_nat_output(struct sk_buff *skb, int port) ++{ ++ struct iphdr *ip_hdr; ++ u8 proto; ++ NAT_CB_T *nat_cb; ++ ++ nat_cb = NAT_SKB_CB(skb); ++ if (nat_cb->tag != NAT_CB_TAG) ++ return 0; ++ ++ if (((u32)nat_cb & 3)) ++ { ++ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__); ++ return 0; ++ } ++ ip_hdr = (struct iphdr *)skb->h.ipiph; ++ proto = ip_hdr->protocol; ++ ++ switch (proto) ++ { ++ case IPPROTO_TCP: ++ case IPPROTO_UDP: ++ return sl351x_nat_tcp_udp_output(skb, port); ++ case IPPROTO_GRE: ++ return sl351x_nat_gre_output(skb, port); ++ } ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_tcp_udp_output ++* Handle NAT TCP/UDP output frames ++*----------------------------------------------------------------------*/ ++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port) ++{ ++ u32 sip, dip; ++ struct ethhdr *ether_hdr; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ struct pppoe_hdr *pppoe_hdr; ++ NAT_CB_T *nat_cb; ++ NAT_CFG_T *cfg; ++ u8 proto; ++ u16 sport, dport, ppp_proto; ++ u32 hash_data[HASH_MAX_DWORDS]; ++ NAT_HASH_ENTRY_T *hash_entry; ++ int hash_index; ++ struct ip_conntrack *nat_ip_conntrack; ++ enum ip_conntrack_info ctinfo; ++ ++ nat_cb = NAT_SKB_CB(skb); ++ cfg = (NAT_CFG_T *)&nat_cfg; ++ ++ ether_hdr = (struct ethhdr *)skb->data; ++ ip_hdr = (struct iphdr *)skb->h.ipiph; ++ tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2)); ++ sip = ntohl(ip_hdr->saddr); ++ dip = ntohl(ip_hdr->daddr); ++ proto = ip_hdr->protocol; ++ sport = ntohs(tcp_hdr->source); ++ dport = ntohs(tcp_hdr->dest); ++ ++#ifdef NAT_DEBUG_MSG ++ { ++ nat_printf("To GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]", ++ port, ntohs(ip_hdr->id), proto, ++ NIPQUAD(ip_hdr->saddr), sport, ++ NIPQUAD(ip_hdr->daddr), dport); ++ if (proto == IPPROTO_TCP) ++ { ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST"); ++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK"); ++ } ++ nat_printf("\n"); ++ } ++#endif ++ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo); ++ if (!nat_ip_conntrack) ++ { ++ nat_printf("IP conntrack info is not found!\n"); ++ return 0; ++ } ++ // nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo); ++ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper) ++ if (nat_ip_conntrack->helper) ++ { ++ nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper); ++ return 0; ++ } ++ ++ //if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED)) ++ // return 0; ++ ++#ifdef NAT_DEBUG_MSG ++ nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state); ++ nat_printf("lan2wan_hash_index=%d, wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index); ++ nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision); ++#endif ++ if (proto == IPPROTO_TCP) ++ { ++ if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE) ++ { ++ if (nat_ip_conntrack->lan2wan_hash_index) ++ { ++#ifdef NAT_DEBUG_MSG ++ nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1); ++#endif ++ hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1); ++ hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1); ++ nat_ip_conntrack->lan2wan_hash_index = 0; ++ } ++ if (nat_ip_conntrack->wan2lan_hash_index) ++ { ++#ifdef NAT_DEBUG_MSG ++ nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1); ++#endif ++ hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1); ++ hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1); ++ nat_ip_conntrack->wan2lan_hash_index = 0; ++ } ++ return 0; ++ ++ } ++ else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED) ++ { ++ return 0; ++ } ++ } ++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))) ++ // if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))) ++ return 0; ++ ++ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data; ++ if (port == cfg->wan_port) // LAN-to-WAN ++ { ++ if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision) ++ return 0; ++#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address ++ if (!sl351x_nat_find_ipcfg(sip, port)) ++ { ++ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip)); ++ return 0; ++ } ++#endif ++ // Note: unused fields (including rule_id) MUST be zero ++ hash_entry->key.Ethertype = 0; ++ hash_entry->key.port_id = cfg->lan_port; ++ hash_entry->key.rule_id = 0; ++ hash_entry->key.ip_protocol = proto; ++ hash_entry->key.reserved1 = 0; ++ hash_entry->key.reserved2 = 0; ++ hash_entry->key.sip = ntohl(nat_cb->sip); ++ hash_entry->key.dip = ntohl(nat_cb->dip); ++ hash_entry->key.sport = nat_cb->sport; ++ hash_entry->key.dport = nat_cb->dport; ++ ++ hash_index = nat_build_keys(&hash_entry->key); ++ ++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT ++ if (hash_get_nat_owner_flag(hash_index)) ++ return 0; ++#endif ++ if (hash_get_valid_flag(hash_index)) ++ { ++ nat_ip_conntrack->lan2wan_collision = 1; ++ nat_collision++; ++#if 0 ++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST))) ++ { ++ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0) ++ { ++ hash_nat_disable_owner(hash_index); ++ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW ++ // nat_printf("Invalidate nat hash entry %d\n", hash_index); ++ } ++ } ++#endif ++ return 0; ++ } ++ ++ // write hash entry ++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id; ++ memcpy(hash_entry->param.da, skb->data, 6); ++ memcpy(hash_entry->param.sa, skb->data+6, 6); ++ hash_entry->param.Sip = sip; ++ hash_entry->param.Dip = dip; ++ hash_entry->param.Sport = sport; ++ hash_entry->param.Dport = dport; ++ hash_entry->param.vlan = 0; ++ hash_entry->param.sw_id = 0; ++ hash_entry->param.mtu = 0; ++ // check PPPoE ++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1); ++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0]; ++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864 ++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21 ++ { ++ hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS; ++ hash_entry->param.pppoe = htons(pppoe_hdr->sid); ++ } ++ else ++ { ++ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS; ++ hash_entry->param.pppoe = 0; ++ } ++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport); ++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID; ++ hash_entry->tmo.counter = hash_entry->tmo.interval = ++ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval; ++ nat_write_hash_entry(hash_index, hash_entry); ++ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index); ++ // hash_dump_entry(hash_index); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW ++ nat_ip_conntrack->lan2wan_hash_index = hash_index + 1; ++ nat_ip_conntrack->hw_nat |= 1; ++ return 0; ++ } ++ else // WAN-to-LAN ++ { ++ if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision) ++ return 0; ++ ++ // Note: unused fields (including rule_id) MUST be zero ++ hash_entry->key.Ethertype = 0; ++ hash_entry->key.port_id = cfg->wan_port; ++ hash_entry->key.rule_id = 0; ++ hash_entry->key.ip_protocol = proto; ++ hash_entry->key.reserved1 = 0; ++ hash_entry->key.reserved2 = 0; ++ hash_entry->key.sip = ntohl(nat_cb->sip); ++ hash_entry->key.dip = ntohl(nat_cb->dip); ++ hash_entry->key.sport = nat_cb->sport; ++ hash_entry->key.dport = nat_cb->dport; ++ ++ hash_index = nat_build_keys(&hash_entry->key); ++ ++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT ++ if (hash_get_nat_owner_flag(hash_index)) ++ return 0; ++#endif ++ if (hash_get_valid_flag(hash_index)) ++ { ++ nat_ip_conntrack->wan2lan_collision = 1; ++ nat_collision++; ++#if 0 ++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST))) ++ { ++ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0) ++ { ++ hash_nat_disable_owner(hash_index); ++ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW ++ // nat_printf("Invalidate nat hash entry %d\n", hash_index); ++ } ++ } ++#endif ++ return 0; ++ } ++ ++ // write hash entry ++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id; ++ memcpy(hash_entry->param.da, skb->data, 6); ++ memcpy(hash_entry->param.sa, skb->data+6, 6); ++ hash_entry->param.Sip = sip; ++ hash_entry->param.Dip = dip; ++ hash_entry->param.Sport = sport; ++ hash_entry->param.Dport = dport; ++ hash_entry->param.vlan = 0; ++ hash_entry->param.pppoe = 0; ++ hash_entry->param.sw_id = 0; ++ hash_entry->param.mtu = 0; ++ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS; ++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport); ++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;; ++ hash_entry->tmo.counter = hash_entry->tmo.interval = ++ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval; ++ nat_write_hash_entry(hash_index, hash_entry); ++ ++ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index); ++ // hash_dump_entry(hash_index); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW ++ nat_ip_conntrack->wan2lan_hash_index = hash_index + 1; ++ nat_ip_conntrack->hw_nat |= 2; ++ return 0; ++ } ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_gre_output ++* Handle NAT GRE output frames ++*----------------------------------------------------------------------*/ ++int sl351x_nat_gre_output(struct sk_buff *skb, int port) ++{ ++ u32 sip, dip; ++ struct ethhdr *ether_hdr; ++ struct iphdr *ip_hdr; ++ struct pppoe_hdr *pppoe_hdr; ++ GRE_PKTHDR_T *gre_hdr; ++ NAT_CB_T *nat_cb; ++ NAT_CFG_T *cfg; ++ u16 ppp_proto; ++ u32 hash_data[HASH_MAX_DWORDS]; ++ GRE_HASH_ENTRY_T *hash_entry; ++ int hash_index; ++ struct ip_conntrack *nat_ip_conntrack; ++ enum ip_conntrack_info ctinfo; ++ ++ nat_cb = NAT_SKB_CB(skb); ++ cfg = (NAT_CFG_T *)&nat_cfg; ++ ++ ether_hdr = (struct ethhdr *)skb->data; ++ ip_hdr = (struct iphdr *)skb->h.ipiph; ++ gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2)); ++ sip = ntohl(ip_hdr->saddr); ++ dip = ntohl(ip_hdr->daddr); ++ ++#ifdef NAT_DEBUG_MSG ++ { ++ nat_printf("To GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d", ++ port, ntohs(ip_hdr->id), ++ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id), ++ NIPQUAD(ip_hdr->daddr)); ++ nat_printf("\n"); ++ } ++#endif ++ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo); ++ if (nat_ip_conntrack) ++ { ++ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper) ++ if (nat_ip_conntrack->helper) ++ { ++ nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper); ++ return 0; ++ } ++ if (!(nat_ip_conntrack->status & IPS_ASSURED)) ++ return 0; ++ } ++ ++ hash_entry = (GRE_HASH_ENTRY_T *)&hash_data; ++ if (port == cfg->wan_port) // LAN-to-WAN ++ { ++#ifdef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address ++ if (!sl351x_nat_find_ipcfg(sip, port)) ++ { ++ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip)); ++ return 0; ++ } ++#endif ++ // Note: unused fields (including rule_id) MUST be zero ++ hash_entry->key.Ethertype = 0; ++ hash_entry->key.port_id = cfg->lan_port; ++ hash_entry->key.rule_id = 0; ++ hash_entry->key.ip_protocol = IPPROTO_GRE; ++ hash_entry->key.reserved1 = 0; ++ hash_entry->key.reserved2 = 0; ++ hash_entry->key.reserved3 = 0; ++ hash_entry->key.reserved4 = 0; ++ hash_entry->key.sip = ntohl(nat_cb->sip); ++ hash_entry->key.dip = ntohl(nat_cb->dip); ++ hash_entry->key.protocol = nat_cb->sport; ++ hash_entry->key.call_id = nat_cb->dport; ++ ++ hash_index = gre_build_keys(&hash_entry->key); ++ ++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT ++ if (hash_get_nat_owner_flag(hash_index)) ++ return 0; ++#endif ++ if (hash_get_valid_flag(hash_index)) ++ { ++ return 0; ++ } ++ ++ // write hash entry ++ hash_entry->key.rule_id = cfg->gre_rule_id; ++ memcpy(hash_entry->param.da, skb->data, 6); ++ memcpy(hash_entry->param.sa, skb->data+6, 6); ++ hash_entry->param.Sip = sip; ++ hash_entry->param.Dip = dip; ++ hash_entry->param.Sport = 0; ++ hash_entry->param.Dport = ntohs(gre_hdr->call_id); ++ hash_entry->param.vlan = 0; ++ hash_entry->param.sw_id = 0; ++ hash_entry->param.mtu = 0; ++ // check PPPoE ++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1); ++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0]; ++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864 ++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21 ++ { ++ hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS; ++ hash_entry->param.pppoe = htons(pppoe_hdr->sid); ++ } ++ else ++ { ++ hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS; ++ hash_entry->param.pppoe = 0; ++ } ++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id)); ++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID; ++ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval; ++ gre_write_hash_entry(hash_index, hash_entry); ++ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index); ++ // hash_dump_entry(hash_index); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW ++ return 0; ++ } ++ else // WAN-to-LAN ++ { ++ // Note: unused fields (including rule_id) MUST be zero ++ hash_entry->key.Ethertype = 0; ++ hash_entry->key.port_id = cfg->wan_port; ++ hash_entry->key.rule_id = 0; ++ hash_entry->key.ip_protocol = IPPROTO_GRE; ++ hash_entry->key.reserved1 = 0; ++ hash_entry->key.reserved2 = 0; ++ hash_entry->key.reserved3 = 0; ++ hash_entry->key.reserved4 = 0; ++ hash_entry->key.sip = ntohl(nat_cb->sip); ++ hash_entry->key.dip = ntohl(nat_cb->dip); ++ hash_entry->key.protocol = nat_cb->sport; ++ hash_entry->key.call_id = nat_cb->dport; ++ ++ hash_index = gre_build_keys(&hash_entry->key); ++ ++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT ++ if (hash_get_nat_owner_flag(hash_index)) ++ return 0; ++#endif ++ if (hash_get_valid_flag(hash_index)) ++ { ++ return 0; ++ } ++ ++ // write hash entry ++ hash_entry->key.rule_id = cfg->gre_rule_id; ++ memcpy(hash_entry->param.da, skb->data, 6); ++ memcpy(hash_entry->param.sa, skb->data+6, 6); ++ hash_entry->param.Sip = sip; ++ hash_entry->param.Dip = dip; ++ hash_entry->param.Sport = 0; ++ hash_entry->param.Dport = ntohs(gre_hdr->call_id); ++ hash_entry->param.vlan = 0; ++ hash_entry->param.pppoe = 0; ++ hash_entry->param.sw_id = 0; ++ hash_entry->param.mtu = 0; ++ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS; ++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id)); ++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;; ++ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval; ++ gre_write_hash_entry(hash_index, hash_entry); ++ ++ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index); ++ // hash_dump_entry(hash_index); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW ++ return 0; ++ } ++ return 0; ++} ++ ++ ++#ifdef _HAVE_DYNAMIC_PORT_LIST ++/*---------------------------------------------------------------------- ++* sl_nat_add_port ++*----------------------------------------------------------------------*/ ++void sl_nat_add_port(u8 protocol, u16 port) ++{ ++ int i; ++ u16 *port_ptr; ++ ++ if (protocol == IPPROTO_TCP) ++ port_ptr = dynamic_tcp_port_list; ++ else if (protocol == IPPROTO_UDP) ++ port_ptr = dynamic_udp_port_list; ++ else ++ return; ++ ++ for (i=0; *port_ptr; i++) ++ { ++ if (port == *port_ptr) ++ return; ++ port_ptr++; ++ } ++ port_ptr++; ++ *port_ptr = port; ++} ++ ++/*---------------------------------------------------------------------- ++* sl_nat_remove_port ++*----------------------------------------------------------------------*/ ++void sl_nat_remove_port(u8 protocol, u16 port) ++{ ++ int i, j; ++ u16 *port_ptr, *next; ++ ++ if (protocol == IPPROTO_TCP) ++ port_ptr = dynamic_tcp_port_list; ++ else if (protocol == IPPROTO_UDP) ++ port_ptr = dynamic_udp_port_list; ++ else ++ return; ++ ++ for (i=0; *port_ptr; i++, port_ptr++) ++ { ++ if (port == *port_ptr) ++ { ++ port_next = port_ptr + 1; ++ for (j=i+1; *port_next; i++, j++) ++ *port_ptr++ = *port_next++; ++ *port_ptr = 0; ++ return; ++ } ++ } ++} ++#endif ++ ++/*---------------------------------------------------------------------- ++* sl351x_nat_ioctl ++*----------------------------------------------------------------------*/ ++int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ int i, j, port_id; ++ NATCMD_HDR_T nat_hdr; ++ NAT_REQ_E ctrl; ++ unsigned char *req_datap; ++ NAT_IP_ENTRY_T *ipcfg; ++ NAT_XPORT_ENTRY_T *xport_entry; ++ NAT_WRULE_ENTRY_T *wrule_entry; ++ unsigned int qid; ++ ++ if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr))) ++ return -EFAULT; ++ req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr); ++ port_id = tp->port_id; ++ switch (nat_hdr.cmd) { ++ case NATSSTATUS: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_STATUS_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status))) ++ return -EFAULT; ++ if (ctrl.status.enable != 0 && ctrl.status.enable != 1) ++ return -EPERM; ++ // sl351x_nat_set_enabled_flag(ctrl.status.enable); ++ if (nat_cfg.enabled && (ctrl.status.enable == 0)) ++ { ++ for (i=0; i<HASH_TOTAL_ENTRIES; i++) ++ { ++ if (hash_get_nat_owner_flag(i)) ++ { ++ hash_nat_disable_owner(i); ++ hash_invalidate_entry(i); ++ } ++ } ++ } ++ nat_cfg.enabled = ctrl.status.enable; ++ break; ++ case NATGSTATUS: ++ if (nat_hdr.len != sizeof(NAT_STATUS_T)) ++ return -EPERM; ++ ctrl.status.enable = nat_cfg.enabled; ++ if (copy_to_user(req_datap, (void *)&ctrl.status, sizeof(ctrl.status))) ++ return -EFAULT; ++ break; ++ case NATSETPORT: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_PORTCFG_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.portcfg, req_datap, sizeof(ctrl.portcfg))) ++ return -EFAULT; ++ if (ctrl.portcfg.portmap == 0) ++ nat_cfg.lan_port = port_id; ++ else if (ctrl.portcfg.portmap == 1) ++ nat_cfg.wan_port = port_id; ++ else ++ return -EPERM; ++ break; ++ case NATGETPORT: ++ if (nat_hdr.len != sizeof(NAT_PORTCFG_T)) ++ return -EPERM; ++ if (nat_cfg.lan_port == port_id) ++ ctrl.portcfg.portmap = 0; ++ else if (nat_cfg.wan_port == port_id) ++ ctrl.portcfg.portmap = 1; ++ else ++ return -EPERM; ++ if (copy_to_user(req_datap, (void *)&ctrl.portcfg, sizeof(ctrl.portcfg))) ++ return -EFAULT; ++ break; ++ case NATADDIP: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_IPCFG_T)) ++ return -EPERM; ++ i = nat_cfg.ipcfg[port_id].total; ++ if (i >= CONFIG_NAT_MAX_IP_NUM) ++ return -E2BIG; ++ if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T))) ++ return -EFAULT; ++ nat_cfg.ipcfg[port_id].total++; ++ break; ++ case NATDELIP: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_IPCFG_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg))) ++ return -EFAULT; ++ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0]; ++ for (i=0; i<nat_cfg.ipcfg[port_id].total; i++, ipcfg++) ++ { ++ if (ipcfg->ipaddr == ctrl.ipcfg.entry.ipaddr) ++ { ++ NAT_IP_ENTRY_T *ipcfg_next; ++ ipcfg_next = ipcfg + 1; ++ for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++) ++ { ++ memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T)); ++ ipcfg++; ++ ipcfg_next++; ++ } ++ ipcfg->ipaddr = 0; ++ ipcfg->netmask = 0; ++ nat_cfg.ipcfg[port_id].total--; ++ return 0; ++ } ++ } ++ return -ENOENT; ++ case NATGETIP: ++ if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T)) ++ return -EPERM; ++ if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T))) ++ return -EFAULT; ++ break; ++ case NATAXPORT: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_XPORT_T)) ++ return -EPERM; ++ i = nat_cfg.xport.total; ++ if (i >= CONFIG_NAT_MAX_XPORT) ++ return -E2BIG; ++ if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T))) ++ return -EFAULT; ++ nat_cfg.xport.total++; ++ break; ++ case NATDXPORT: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_XPORT_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T))) ++ return -EFAULT; ++ xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0]; ++ for (i=0; i<nat_cfg.xport.total; i++, xport_entry++) ++ { ++ if (memcmp((void *)xport_entry, (void *)&ctrl.xport, sizeof(NAT_XPORT_ENTRY_T)) == 0) ++ { ++ NAT_XPORT_ENTRY_T *xport_next; ++ xport_next = xport_entry + 1; ++ for (j=i+1; j < nat_cfg.xport.total; i++, j++) ++ { ++ memcpy((void *)xport_entry, (void *)xport_next, sizeof(NAT_XPORT_ENTRY_T)); ++ xport_entry++; ++ xport_next++; ++ } ++ memset((void *)xport_entry, 0, sizeof(NAT_XPORT_ENTRY_T)); ++ nat_cfg.xport.total--; ++ return 0; ++ } ++ } ++ return -ENOENT; ++ case NATGXPORT: ++ if (nat_hdr.len != sizeof(NAT_XPORT_ALL_T)) ++ return -EPERM; ++ if (copy_to_user(req_datap, (void *)&nat_cfg.xport, sizeof(NAT_XPORT_ALL_T))) ++ return -EFAULT; ++ break; ++ case NATSWEIGHT: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_WEIGHT_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&nat_cfg.weight, req_datap, sizeof(NAT_WEIGHT_T))) ++ return -EFAULT; ++ mac_set_hw_tx_weight(dev, (char *)&nat_cfg.weight); ++ break; ++ case NATGWEIGHT: ++ if (nat_hdr.len != sizeof(NAT_WEIGHT_T)) ++ return -EPERM; ++ mac_get_hw_tx_weight(dev, (char *)&nat_cfg.weight); ++ if (copy_to_user(req_datap, (void *)&nat_cfg.weight, sizeof(NAT_WEIGHT_T))) ++ return -EFAULT; ++ break; ++ case NATAWRULE: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_WRULE_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&qid, req_datap, sizeof(qid))) ++ return -EFAULT; ++ if (qid > CONFIG_NAT_TXQ_NUM) ++ return -EPERM; ++ i = nat_cfg.wrule[qid].total; ++ if (i >= CONFIG_NAT_MAX_WRULE) ++ return -E2BIG; ++ if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T))) ++ return -EFAULT; ++ nat_cfg.wrule[qid].total++; ++ break; ++ case NATDWRULE: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_WRULE_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T))) ++ return -EFAULT; ++ qid = ctrl.wrule.qid; ++ if (qid >= CONFIG_NAT_TXQ_NUM) ++ return -EPERM; ++ wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0]; ++ for (i=0; i<nat_cfg.wrule[qid].total; i++, wrule_entry++) ++ { ++ if (memcmp((void *)wrule_entry, (void *)&ctrl.wrule.entry, sizeof(NAT_WRULE_ENTRY_T)) == 0) ++ { ++ NAT_WRULE_ENTRY_T *wrule_next; ++ wrule_next = wrule_entry + 1; ++ for (j=i+1; j < nat_cfg.wrule[qid].total; i++, j++) ++ { ++ memcpy((void *)wrule_entry, (void *)wrule_next, sizeof(NAT_WRULE_ENTRY_T)); ++ wrule_entry++; ++ wrule_next++; ++ } ++ memset((void *)wrule_entry, 0, sizeof(NAT_WRULE_ENTRY_T)); ++ nat_cfg.wrule[qid].total--; ++ return 0; ++ } ++ } ++ return -ENOENT; ++ case NATGWRULE: ++ if (nat_hdr.len != sizeof(NAT_WRULE_ALL_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&qid, req_datap, sizeof(qid))) ++ return -EFAULT; ++ if (qid >= CONFIG_NAT_TXQ_NUM) ++ return -EPERM; ++ if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T))) ++ return -EFAULT; ++ break; ++ case NATSDEFQ: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_QUEUE_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32))) ++ return -EFAULT; ++ break; ++ case NATGDEFQ: ++ if (nat_hdr.len != sizeof(NAT_QUEUE_T)) ++ return -EPERM; ++ if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32))) ++ return -EFAULT; ++ case NATRMIPCFG: ++ nat_cfg.ipcfg[port_id].total = 0; ++ break; ++ case NATTESTENTRY: ++ if (!capable(CAP_NET_ADMIN)) ++ return -EPERM; ++ if (nat_hdr.len != sizeof(NAT_TESTENTRY_T)) ++ return -EPERM; ++ if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry))) ++ return -EFAULT; ++ if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1) ++ return -EPERM; ++ nat_cfg.init_enabled = ctrl.init_entry.init_enable; ++ break; ++ ++ default: ++ return -EPERM; ++ } ++ ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* nat_init_test_entry ++* Initialize NAT test hash entries ++* ++* SmartBits P1 -----> Lepus GMAC 0 --------------+ ++* | ++* | ++* P3 <----- Lepus GMAC 1 -- HW TxQ0 <--+ ++* -- HW TxQ1 <--+ ++* -- HW TxQ2 <--+ ++* -- HW TxQ3 <--+ ++* ++* SmartBits P1 <----- Lepus GMAC 0 -- HW TxQ0 <--+ ++* -- HW TxQ1 <--+ ++* -- HW TxQ2 <--+ ++* -- HW TxQ3 <--+ ++* | ++* | ++* P3 -----> Lepus GMAC 1 --------------+ ++* ++* LAN GMAC0 <--------------------------------------------> GMAC1 WAN ++* 192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80 ++* 192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80 ++* where: ++* [x] : Packet Type ++* [y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3, ++* ++* ++* Packet Type: ++* 1. TCP Frames <---> TCP Frames ++* LAN GMAC0 <--------------------------------> GMAC1 WAN ++* 192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80 ++* 192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80 ++* ++* 192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80 ++* 192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80 ++* ++* 192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80 ++* 192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80 ++* ++* 192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80 ++* 192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80 ++* ++* 2 TCP Frames <----> PPPoE + TCP Frames ++* LAN GMAC0 <--------------------------------> GMAC1 WAN ++* 192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80 ++* 192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80 ++* ++* 192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80 ++* 192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80 ++* ++* 192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80 ++* 192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80 ++* ++* 192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80 ++* 192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80 ++* ++* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames ++* LAN GMAC0 <--------------------------------> GMAC1 WAN ++* 192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80 ++* 192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80 ++* ++* 192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80 ++* 192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80 ++* ++* 192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80 ++* 192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80 ++* ++* 192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80 ++* 192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80 ++* ++* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames ++* LAN GMAC0 <--------------------------------> GMAC1 WAN ++* 192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80 ++* 192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80 ++* ++* 192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80 ++* 192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80 ++* ++* 192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80 ++* 192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80 ++* ++* 192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80 ++* 192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80 ++* ++* ++* ++*----------------------------------------------------------------------*/ ++#ifdef SL351x_NAT_TEST_BY_SMARTBITS ++#define NAT_IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d) ++#define NAT_TEST_CLIENT_IP NAT_IPIV(192,168,1,1) ++#define NAT_TEST_SERVER_IP NAT_IPIV(168,95,1,1) ++#define NAT_TEST_LAN_IP NAT_IPIV(192,168,1,254) ++#define NAT_TEST_WAN_IP NAT_IPIV(192,168,2,254) ++#define NAT_TEST_MAP_PORT_BASE 2001 ++#define NAT_TEST_SPORT 50 ++#define NAT_TEST_DPORT 80 ++#define NAT_TEST_PROTOCOL 6 ++u8 nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55}; ++u8 nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee}; ++u8 nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11}; ++u8 nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22}; ++static void nat_init_test_entry(void) ++{ ++ int i, j ; ++ NAT_HASH_ENTRY_T *hash_entry; ++ u32 sip, dip; ++ u32 hash_data[HASH_MAX_DWORDS]; ++ NAT_CFG_T *cfg; ++ int hash_index; ++ ++ cfg = (NAT_CFG_T *)&nat_cfg; ++ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data; ++ hash_entry->key.Ethertype = 0; ++ hash_entry->key.rule_id = 0; ++ hash_entry->key.ip_protocol = IPPROTO_TCP; ++ hash_entry->key.reserved1 = 0; ++ hash_entry->key.reserved2 = 0; ++ // hash_entry->key.sip = NAT_TEST_CLIENT_IP; ++ // hash_entry->key.dip = NAT_TEST_SERVER_IP; ++ hash_entry->key.sport = htons(NAT_TEST_SPORT); ++ hash_entry->key.dport = htons(NAT_TEST_DPORT); ++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id; ++ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS; ++ ++ sip = NAT_TEST_CLIENT_IP; ++ dip = NAT_TEST_SERVER_IP; ++ ++ // Init TCP <------> TCP hash entries ++ // LAN --> WAN ++ // (1) TCP --> TCP ++ // (2) TCP --> PPPoE + TCP ++ // (3) TCP --> VLAN-B + PPPoE + TCP ++ // (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP ++ memcpy(hash_entry->param.da, nat_test_wan_target_da, 6); ++ memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6); ++ hash_entry->key.port_id = cfg->lan_port; ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ if (i < 2) ++ { ++ hash_entry->action.bits.dest_qid = i+2; ++ } ++ else ++ { ++ hash_entry->action.bits.dest_qid = i; ++ } ++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID; ++ hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i; ++ hash_entry->param.Dport = NAT_TEST_DPORT; ++ for (j=0; j<4; j++) ++ { ++ hash_entry->key.sip = sip + i + j*0x100; ++ hash_entry->key.dip = dip + i + j*0x100; ++ hash_entry->param.Dip = hash_entry->key.dip; ++ hash_entry->param.Sip = NAT_TEST_WAN_IP; ++ switch (j) ++ { ++ case 0: ++ hash_entry->action.bits.pppoe = 0; ++ hash_entry->param.pppoe = 0; ++ hash_entry->action.bits.vlan = 0; ++ hash_entry->param.vlan = 0; ++ break; ++ case 1: ++ hash_entry->action.bits.pppoe = 1; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 0; ++ hash_entry->param.vlan = 0; ++ break; ++ case 2: ++ hash_entry->action.bits.pppoe = 1; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 1; ++ hash_entry->param.vlan = i+10; ++ break; ++ case 3: ++ hash_entry->action.bits.pppoe = 1; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 1; ++ hash_entry->param.vlan = i+10; ++ break; ++ } ++ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff; ++ hash_index = nat_build_keys(&hash_entry->key); ++ nat_write_hash_entry(hash_index, hash_entry); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW ++ } ++ } ++ ++ ++ // WAN --> LAN ++ hash_entry->key.port_id = cfg->wan_port; ++ hash_entry->key.sport = htons(NAT_TEST_DPORT); ++ hash_entry->key.dport = htons(NAT_TEST_DPORT); ++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id; ++ hash_entry->action.dword = NAT_WAN2LAN_ACTIONS; ++ hash_entry->key.sport = htons(NAT_TEST_DPORT); ++ memcpy(hash_entry->param.da, nat_test_lan_target_da, 6); ++ memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6); ++ for (i=0; i<TOE_HW_TXQ_NUM; i++) ++ { ++ hash_entry->key.dport = htons(NAT_TEST_MAP_PORT_BASE + i); ++ if (i < 2) ++ { ++ hash_entry->action.bits.dest_qid = i+2; ++ } ++ else ++ { ++ hash_entry->action.bits.dest_qid = i; ++ } ++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID; ++ hash_entry->param.Dport = NAT_TEST_SPORT; ++ hash_entry->param.Sport = NAT_TEST_DPORT; ++ hash_entry->param.da[5] = i; ++ for (j=0; j<4; j++) ++ { ++ hash_entry->key.sip = (dip + i + j*0x100); ++ hash_entry->key.dip = (NAT_TEST_WAN_IP); ++ hash_entry->param.Sip = hash_entry->key.sip; ++ hash_entry->param.Dip = sip + i + j*0x100; ++ switch (j) ++ { ++ case 0: ++ hash_entry->action.bits.pppoe = 0; ++ hash_entry->param.pppoe = 0; ++ hash_entry->action.bits.vlan = 0; ++ hash_entry->param.vlan = 0; ++ break; ++ case 1: ++ hash_entry->action.bits.pppoe = 2; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 0; ++ hash_entry->param.vlan = 0; ++ break; ++ case 2: ++ hash_entry->action.bits.pppoe = 2; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 2; ++ hash_entry->param.vlan = i+5; ++ break; ++ case 3: ++ hash_entry->action.bits.pppoe = 1; ++ hash_entry->param.pppoe = i+1; ++ hash_entry->action.bits.vlan = 1; ++ hash_entry->param.vlan = i+5; ++ break; ++ } ++ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff; ++ hash_index = nat_build_keys(&hash_entry->key); ++ nat_write_hash_entry(hash_index, hash_entry); ++ hash_nat_enable_owner(hash_index); ++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW ++ } ++ } ++} ++#endif // SL351x_NAT_TEST_BY_SMARTBITS ++ ++#endif // CONFIG_SL351x_NAT ++ +Index: linux-2.6.23.16/drivers/net/sl351x_proc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_proc.c 2008-03-15 16:59:48.862910740 +0200 +@@ -0,0 +1,578 @@ ++/**************************************************************************** ++* Copyright 2006 Storlink Corp. All rights reserved. ++*---------------------------------------------------------------------------- ++* Name : sl351x_proc.c ++* Description : ++* Handle Proc Routines for Storlink SL351x Platform ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* 04/13/2006 Gary Chen Create and implement ++* ++* ++****************************************************************************/ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/it8712.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/skbuff.h> ++#include <linux/if_ether.h> ++#include <linux/if_pppox.h> ++#include <linux/in.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#include <linux/ppp_defs.h> ++#ifdef CONFIG_NETFILTER ++#include <linux/netfilter_ipv4/ip_conntrack.h> ++#endif ++#include <linux/proc_fs.h> ++#include <linux/seq_file.h> ++#include <linux/percpu.h> ++#ifdef CONFIG_SYSCTL ++#include <linux/sysctl.h> ++#endif ++ ++#define MIDWAY ++#define SL_LEPUS ++ ++// #define PROC_DEBUG_MSG 1 ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <asm/arch/sl351x_hash_cfg.h> ++#include <asm/arch/sl351x_nat_cfg.h> ++#include <asm/arch/sl351x_toe.h> ++ ++#ifdef CONFIG_PROC_FS ++/*---------------------------------------------------------------------- ++* Definition ++*----------------------------------------------------------------------*/ ++#define proc_printf printk ++#define SL351x_GMAC_PROC_NAME "sl351x_gmac" ++#define SL351x_NAT_PROC_NAME "sl351x_nat" ++#define SL351x_TOE_PROC_NAME "sl351x_toe" ++ ++/*---------------------------------------------------------------------- ++* Function Definition ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static int nat_ct_open(struct inode *inode, struct file *file); ++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos); ++static void nat_ct_seq_stop(struct seq_file *s, void *v); ++static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos); ++static int nat_ct_seq_show(struct seq_file *s, void *v); ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++static int toe_ct_open(struct inode *inode, struct file *file); ++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos); ++static void toe_ct_seq_stop(struct seq_file *s, void *v); ++static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos); ++static int toe_ct_seq_show(struct seq_file *s, void *v); ++extern int sl351x_get_toe_conn_flag(int index); ++extern struct toe_conn * sl351x_get_toe_conn_info(int index); ++#endif ++ ++static int gmac_ct_open(struct inode *inode, struct file *file); ++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos); ++static void gmac_ct_seq_stop(struct seq_file *s, void *v); ++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos); ++static int gmac_ct_seq_show(struct seq_file *s, void *v); ++ ++ ++/*---------------------------------------------------------------------- ++* Data ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SYSCTL ++// static struct ctl_table_header *nat_ct_sysctl_header; ++#endif ++ ++#ifdef CONFIG_SL351x_NAT ++static struct seq_operations nat_ct_seq_ops = { ++ .start = nat_ct_seq_start, ++ .next = nat_ct_seq_next, ++ .stop = nat_ct_seq_stop, ++ .show = nat_ct_seq_show ++}; ++ ++static struct file_operations nat_file_ops= { ++ .owner = THIS_MODULE, ++ .open = nat_ct_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = seq_release ++}; ++#endif // CONFIG_SL351x_NAT ++ ++#ifdef CONFIG_SL351x_RXTOE ++static struct seq_operations toe_ct_seq_ops = { ++ .start = toe_ct_seq_start, ++ .next = toe_ct_seq_next, ++ .stop = toe_ct_seq_stop, ++ .show = toe_ct_seq_show ++}; ++ ++static struct file_operations toe_file_ops= { ++ .owner = THIS_MODULE, ++ .open = toe_ct_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = seq_release ++}; ++#endif ++ ++static struct seq_operations gmac_ct_seq_ops = { ++ .start = gmac_ct_seq_start, ++ .next = gmac_ct_seq_next, ++ .stop = gmac_ct_seq_stop, ++ .show = gmac_ct_seq_show ++}; ++ ++static struct file_operations gmac_file_ops= { ++ .owner = THIS_MODULE, ++ .open = gmac_ct_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = seq_release ++}; ++ ++#ifdef SL351x_GMAC_WORKAROUND ++extern u32 gmac_workaround_cnt[4]; ++extern u32 gmac_short_frame_workaround_cnt[2]; ++#ifdef CONFIG_SL351x_NAT ++ extern u32 sl351x_nat_workaround_cnt; ++#endif ++#endif ++/*---------------------------------------------------------------------- ++* nat_ct_open ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static int nat_ct_open(struct inode *inode, struct file *file) ++{ ++ return seq_open(file, &nat_ct_seq_ops); ++} ++#endif // CONFIG_SL351x_NAT ++/*---------------------------------------------------------------------- ++* nat_ct_seq_start ++* find the first ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos) ++{ ++ int i; ++ ++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos); ++ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++) ++ { ++ if (hash_get_nat_owner_flag(i)) ++ { ++ *pos = i; ++ return (void *)(i+1); ++ } ++ } ++ return NULL; ++} ++#endif // CONFIG_SL351x_NAT ++/*---------------------------------------------------------------------- ++* nat_ct_seq_stop ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static void nat_ct_seq_stop(struct seq_file *s, void *v) ++{ ++} ++#endif // CONFIG_SL351x_NAT ++/*---------------------------------------------------------------------- ++* nat_ct_seq_next ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos) ++{ ++ int i; ++ ++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos); ++ (*pos)++; ++ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++) ++ { ++ if (hash_get_nat_owner_flag(i)) ++ { ++ *pos = i; ++ return (void *)(i+1); ++ } ++ } ++ return NULL; ++} ++#endif // CONFIG_SL351x_NAT ++/*---------------------------------------------------------------------- ++* nat_ct_seq_show ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_NAT ++static int nat_ct_seq_show(struct seq_file *s, void *v) ++{ ++ int idx; ++ NAT_HASH_ENTRY_T *nat_entry; ++ GRE_HASH_ENTRY_T *gre_entry; ++ ++ idx = (int)v; ++ if (idx<=0 || idx >HASH_TOTAL_ENTRIES) ++ return -ENOSPC; ++ ++ idx--; ++ nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx]; ++ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry; ++ if (nat_entry->key.ip_protocol == IPPROTO_GRE) ++ { ++ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n", ++ idx, gre_entry->key.port_id, gre_entry->key.ip_protocol, ++ HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id), ++ HIPQUAD(gre_entry->key.dip))) ++ return -ENOSPC; ++ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n", ++ HIPQUAD(gre_entry->param.Sip), ++ HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport, ++ gre_entry->tmo.counter)) ++ return -ENOSPC; ++ } ++ else ++ { ++ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n", ++ idx, nat_entry->key.port_id, nat_entry->key.ip_protocol, ++ HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport), ++ HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport))) ++ return -ENOSPC; ++ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n", ++ HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport, ++ HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport, ++ nat_entry->tmo.counter)) ++ return -ENOSPC; ++ } ++ return 0; ++} ++#endif // CONFIG_SL351x_NAT ++ ++/*---------------------------------------------------------------------- ++* toe_ct_open ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static int toe_ct_open(struct inode *inode, struct file *file) ++{ ++ return seq_open(file, &toe_ct_seq_ops); ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_ct_seq_start ++* find the first ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos) ++{ ++ int i; ++ ++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos); ++ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++) ++ { ++ if (sl351x_get_toe_conn_flag(i)) ++ { ++ *pos = i; ++ return (void *)(i+1); ++ } ++ } ++ return NULL; ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_ct_seq_stop ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static void toe_ct_seq_stop(struct seq_file *s, void *v) ++{ ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_ct_seq_next ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos) ++{ ++ int i; ++ ++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos); ++ (*pos)++; ++ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++) ++ { ++ if (sl351x_get_toe_conn_flag(i)) ++ { ++ *pos = i; ++ return (void *)(i+1); ++ } ++ } ++ return NULL; ++} ++#endif ++/*---------------------------------------------------------------------- ++* toe_ct_seq_show ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_SL351x_RXTOE ++static int toe_ct_seq_show(struct seq_file *s, void *v) ++{ ++ int idx; ++ struct toe_conn *toe_entry; ++ ++ idx = (int)v; ++ if (idx<=0 || idx >TOE_TOE_QUEUE_NUM) ++ return -ENOSPC; ++ ++ idx--; ++ toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx); ++ if (!toe_entry) ++ return -ENOSPC; ++ ++ if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n", ++ idx, toe_entry->qid, toe_entry->gmac->port_id, ++ NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source), ++ NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest))) ++ return -ENOSPC; ++ return 0; ++} ++#endif ++/*---------------------------------------------------------------------- ++* gmac_ct_open ++*----------------------------------------------------------------------*/ ++static int gmac_ct_open(struct inode *inode, struct file *file) ++{ ++ return seq_open(file, &gmac_ct_seq_ops); ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_ct_seq_start ++* find the first ++*----------------------------------------------------------------------*/ ++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos) ++{ ++ int i; ++ i = (int)*pos + 1;; ++ ++ if (i > 9) ++ return NULL; ++ else ++ return (void *)i; ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_ct_seq_stop ++*----------------------------------------------------------------------*/ ++static void gmac_ct_seq_stop(struct seq_file *s, void *v) ++{ ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_ct_seq_next ++*----------------------------------------------------------------------*/ ++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos) ++{ ++ int i; ++ ++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos); ++ ++ (*pos)++; ++ i = (int)*pos + 1;; ++ ++ if (i > 9) ++ return NULL; ++ else ++ return (void *)i; ++} ++ ++/*---------------------------------------------------------------------- ++* seq_dm_long ++*----------------------------------------------------------------------*/ ++static void seq_dm_long(struct seq_file *s, u32 location, int length) ++{ ++ u32 *start_p, *curr_p, *end_p; ++ u32 *datap, data; ++ int i; ++ ++ //if (length > 1024) ++ // length = 1024; ++ ++ start_p = (u32 *)location; ++ end_p = (u32 *)location + length; ++ curr_p = (u32 *)((u32)location & 0xfffffff0); ++ datap = (u32 *)location; ++ while (curr_p < end_p) ++ { ++ cond_resched(); ++ seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0); ++ for (i=0; i<4; i++) ++ { ++ if (curr_p < start_p || curr_p >= end_p) ++ seq_printf(s, " "); ++ else ++ { ++ data = *datap; ++ seq_printf(s, "%08X ", data); ++ } ++ if (i==1) ++ seq_printf(s, "- "); ++ ++ curr_p++; ++ datap++; ++ } ++ seq_printf(s, "\n"); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* gmac_ct_seq_show ++*----------------------------------------------------------------------*/ ++static int gmac_ct_seq_show(struct seq_file *s, void *v) ++{ ++ switch ((int)v) ++ { ++ case 1: ++ seq_printf(s, "\nGMAC Global Registers\n"); ++ seq_dm_long(s, TOE_GLOBAL_BASE, 32); ++ break; ++ case 2: ++ seq_printf(s, "\nGMAC Non-TOE Queue Header\n"); ++ seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12); ++ break; ++ case 3: ++ seq_printf(s, "\nGMAC TOE Queue Header\n"); ++ seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12); ++ break; ++ case 4: ++ seq_printf(s, "\nGMAC-0 DMA Registers\n"); ++ seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52); ++ break; ++ case 5: ++ seq_printf(s, "\nGMAC-0 Registers\n"); ++ seq_dm_long(s, TOE_GMAC0_BASE, 32); ++ break; ++ case 6: ++ seq_printf(s, "\nGMAC-1 DMA Registers\n"); ++ seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52); ++ break; ++ case 7: ++ seq_printf(s, "\nGMAC-1 Registers\n"); ++ seq_dm_long(s, TOE_GMAC1_BASE, 32); ++ break; ++ case 8: ++ seq_printf(s, "\nGLOBAL Registers\n"); ++ seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16); ++ break; ++ case 9: ++#ifdef SL351x_GMAC_WORKAROUND ++ seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]); ++ seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]); ++#ifdef CONFIG_SL351x_NAT ++ seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt); ++#endif ++#endif ++ break; ++ default: ++ return -ENOSPC; ++ } ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* init ++*----------------------------------------------------------------------*/ ++static int __init init(void) ++{ ++ struct proc_dir_entry *proc_gmac=NULL; ++ ++#ifdef CONFIG_SL351x_NAT ++ struct proc_dir_entry *proc_nat=NULL; ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++ struct proc_dir_entry *proc_toe=NULL; ++#endif ++ ++#ifdef CONFIG_SYSCTL ++ // nat_ct_sysctl_header = NULL; ++#endif ++ proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops); ++ if (!proc_gmac) goto init_bad; ++ ++#ifdef CONFIG_SL351x_NAT ++ proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops); ++ if (!proc_nat) goto init_bad; ++#endif // CONFIG_SL351x_NAT ++ ++#ifdef CONFIG_SL351x_RXTOE ++ proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops); ++ if (!proc_toe) goto init_bad; ++#endif ++ ++#ifdef CONFIG_SYSCTL ++ // nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0); ++ // if (!nat_ct_sysctl_header) goto init_bad; ++#endif ++ ++ return 0; ++ ++init_bad: ++ if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME); ++ ++#ifdef CONFIG_SL351x_NAT ++ if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME); ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++ if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME); ++#endif ++ ++#ifdef CONFIG_SYSCTL ++ // if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header); ++#endif ++ proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n"); ++ return -ENOMEM; ++} ++ ++/*---------------------------------------------------------------------- ++* fini ++*----------------------------------------------------------------------*/ ++static void __exit fini(void) ++{ ++ proc_net_remove(SL351x_GMAC_PROC_NAME); ++ ++#ifdef CONFIG_SL351x_NAT ++ proc_net_remove(SL351x_NAT_PROC_NAME); ++#endif ++ ++#ifdef CONFIG_SL351x_RXTOE ++ proc_net_remove(SL351x_TOE_PROC_NAME); ++#endif ++ ++#ifdef CONFIG_SYSCTL ++ // unregister_sysctl_table(nat_ct_sysctl_header); ++#endif ++} ++ ++/*---------------------------------------------------------------------- ++* module ++*----------------------------------------------------------------------*/ ++module_init(init); ++module_exit(fini); ++ ++#endif // CONFIG_PROC_FS +Index: linux-2.6.23.16/drivers/net/sl351x_toe.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl351x_toe.c 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,1083 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl351x_toe.c ++* Description : ++* Provide TOE routines for SL351x ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* Xiaochong ++* ++****************************************************************************/ ++ ++#include <linux/pci.h> ++#include <linux/ip.h> ++#include <linux/ipv6.h> ++#include <linux/tcp.h> ++#include <linux/slab.h> ++#include <linux/etherdevice.h> ++#include <asm/io.h> ++#include <linux/sysctl_storlink.h> ++#include <net/tcp.h> ++#include <linux/if_ether.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <asm/arch/sl351x_toe.h> ++#include <asm/arch/sl351x_hash_cfg.h> ++#include <asm/arch/sl351x_nat_cfg.h> ++ ++static int in_toe_isr; ++static int toe_initialized=0; ++ ++static struct toe_conn toe_connections[TOE_TOE_QUEUE_NUM]; ++EXPORT_SYMBOL(toe_connections); ++static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16))); ++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc); ++ ++extern struct storlink_sysctl storlink_ctl; ++extern TOE_INFO_T toe_private_data; ++extern spinlock_t gmac_fq_lock; ++extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data); ++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2); ++extern int hash_add_toe_entry(HASH_ENTRY_T *entry); ++extern void toe_gmac_fill_free_q(void); ++ ++#define _DEBUG_SKB_ 1 ++#ifdef _DEBUG_SKB_ ++/*--------------------------------------------------------------------------- ++ * _debug_skb ++ *-------------------------------------------------------------------------*/ ++static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data) ++{ ++ if ((u32)skb < 0x1000) ++ { ++ printk("%s skb=%x\n", __func__, (u32)skb); ++ while(1); ++ } ++ REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data; ++} ++#else ++#define _debug_skb(x, y, z) ++#endif ++ ++/*--------------------------------------------------------------------------- ++ * get_connection_seq_num ++ *-------------------------------------------------------------------------*/ ++u32 get_connection_seq_num(unsigned short qid) ++{ ++ TOE_QHDR_T *toe_qhdr; ++ ++ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE; ++ toe_qhdr += qid; ++ return (u32)toe_qhdr->word3.seq_num; ++} ++EXPORT_SYMBOL(get_connection_seq_num); ++ ++/*--------------------------------------------------------------------------- ++ * get_connection_ack_num ++ *-------------------------------------------------------------------------*/ ++u32 get_connection_ack_num(unsigned short qid) ++{ ++ TOE_QHDR_T *toe_qhdr; ++ ++ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE; ++ toe_qhdr += qid; ++ return (u32)toe_qhdr->word4.ack_num; ++} ++EXPORT_SYMBOL(get_connection_ack_num); ++ ++/*--------------------------------------------------------------------------- ++ * dump_toe_qhdr ++ *-------------------------------------------------------------------------*/ ++void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr) ++{ ++ printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32, ++ toe_qhdr->word2.bits32, toe_qhdr->word3.bits32); ++ printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32, ++ toe_qhdr->word5.bits32, toe_qhdr->word6.bits32); ++} ++ ++/*--------------------------------------------------------------------------- ++ * dump_intrq_desc ++ *-------------------------------------------------------------------------*/ ++void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc) ++{ ++ printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32, ++ intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32); ++ printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32, ++ intr_curr_desc->word4.bits32); ++} ++ ++/*--------------------------------------------------------------------------- ++ * This routine will initialize a TOE matching rule ++ * called by SL351x GMAC driver. ++ *-------------------------------------------------------------------------*/ ++void sl351x_toe_init(void) ++{ ++ GMAC_MRxCR0_T mrxcr0; ++ GMAC_MRxCR1_T mrxcr1; ++ GMAC_MRxCR2_T mrxcr2; ++ int rule, rc; ++ ++ if (toe_initialized) ++ return; ++ ++ toe_initialized = 1; ++ ++#ifndef CONFIG_SL351x_NAT ++ mrxcr0.bits32 = 0; ++ mrxcr1.bits32 = 0; ++ mrxcr2.bits32 = 0; ++ mrxcr0.bits.l3 = 1; ++ mrxcr0.bits.l4 = 1; ++ mrxcr1.bits.sip = 1; ++ mrxcr1.bits.dip = 1; ++ mrxcr1.bits.l4_byte0_15 = 0x0f; ++ mrxcr0.bits.sprx = 1; ++ rule = 0; ++ rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32, ++ mrxcr2.bits32); ++ if (rc<0) { ++ printk("%s::Set MAC 0 rule fail!\n", __func__); ++ } ++ rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32, ++ mrxcr2.bits32); ++ if (rc<0) { ++ printk("%s::Set MAC 1 rule fail!\n", __func__); ++ } ++#endif // CONFIG_SL351x_NAT ++} ++ ++/*--------------------------------------------------------------------------- ++ * dump_intrq_desc ++ * assign an interrupt queue number to a give tcp queue ++ *-------------------------------------------------------------------------*/ ++int get_interrupt_queue_id(int tcp_qid) ++{ ++ return (int)(tcp_qid & 0x0003); ++} ++ ++/*--------------------------------------------------------------------------- ++ * reset_connection_index ++ * reset the connection bit by given index ++ *-------------------------------------------------------------------------*/ ++void reset_connection_index(__u8 index) ++{ ++ __u32 mask = ~(0xffffffff & (1<< (index&0x1f))); ++ toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask; ++} ++ ++/*--------------------------------------------------------------------------- ++ * update_timer ++ *-------------------------------------------------------------------------*/ ++void update_timer(struct toe_conn* connection) ++{ ++// if (time_before(jiffies, connection->last_rx_jiffies+3)) ++// if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3) ++// if (connection->last_rx_jiffies > jiffies) ++// printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies); ++/* if ((long)(jiffies + 2)< 3) { // overflow... ++ printk("%s::jiffies %x\n", __func__, jiffies); ++ } */ ++// if ((long)(jiffies - connection->last_rx_jiffies)< 2) ++// return; ++ connection->last_rx_jiffies = jiffies; ++ // gary chen mod_timer(&connection->rx_timer, jiffies+2); ++ connection->rx_timer.expires = jiffies + 2; ++ add_timer(&connection->rx_timer); ++// printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies); ++} ++ ++/*--------------------------------------------------------------------------- ++ * gen_pure_ack ++ *-------------------------------------------------------------------------*/ ++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, ++INTR_QHDR_T *intr_curr_desc) ++{ ++ struct sk_buff *skb; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ struct ethhdr *eth_hdr; ++ ++ if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) { ++ printk("%s::alloc pure ack fail!\n", __func__); ++ return NULL; ++ } ++ skb_reserve(skb, RX_INSERT_BYTES); ++ memset(skb->data, 0, 60); ++ ++ eth_hdr = (struct ethhdr*)&(skb->data[0]); ++ memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr)); ++ ++ ip_hdr = (struct iphdr*)&(skb->data[14]); ++ ip_hdr->version = connection->ip_ver; ++ ip_hdr->ihl = 20>>2; ++ ip_hdr->tot_len = ntohs(40); ++ ip_hdr->frag_off = htons(IP_DF); ++ ip_hdr->ttl = 128; ++ ip_hdr->protocol = 0x06; ++ ip_hdr->saddr = connection->saddr[0]; ++ ip_hdr->daddr = connection->daddr[0]; ++// printk("%s ip sa %x, da %x\n", ++// __func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr)); ++ ++ tcp_hdr = (struct tcphdr*)&(skb->data[34]); ++ tcp_hdr->source = connection->source; ++ tcp_hdr->dest = connection->dest; ++ if (intr_curr_desc) { ++ tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num); ++ tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num); ++ tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size); ++ } else { ++ tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num); ++ tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num); ++ tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize); ++ } ++ tcp_hdr->ack = 1; ++ tcp_hdr->doff = 20 >> 2; ++#if 0 ++ if (!intr_curr_desc) { ++ unsigned char byte; ++ for (i=0; i<20; i++) { ++ byte = skb->data[34+i]; ++ printk("%x ", byte); ++ } ++ printk("\n"); ++ } ++#endif ++ TCP_SKB_CB(skb)->connection = connection; ++ return skb; ++} ++ ++/*--------------------------------------------------------------------------- ++ * connection_rx_timer ++ *-------------------------------------------------------------------------*/ ++void connection_rx_timer(unsigned long *data) ++{ ++ struct toe_conn *connection = (struct toe_conn*)data; ++ unsigned int tcp_qid, toeq_wptr; ++ unsigned int pkt_size, desc_count; ++ struct sk_buff *skb; ++ GMAC_RXDESC_T *toe_curr_desc; ++ TOE_QHDR_T *toe_qhdr; ++ struct net_device *dev; ++ unsigned long conn_flags; ++ DMA_RWPTR_T toeq_rwptr; ++ unsigned short timeout_descs; ++ ++ if (in_toe_isr) ++ printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr); ++ ++ if (connection) { ++ /* should we disable gmac interrupt first? */ ++ if (!connection->gmac) ++ printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac); ++ local_irq_save(conn_flags); ++ if (!spin_trylock(&connection->conn_lock)) { ++ local_irq_restore(conn_flags); ++ // timer should be updated by the toeq isr. So no need to update here. ++ printk("%s::conn_lock is held by ISR!\n", __func__); ++ return; ++ } ++ disable_irq(connection->gmac->irq); ++ ++ /* disable hash entry and get toeq desc. */ ++ hash_set_valid_flag(connection->hash_entry_index, 0); ++ do{} while(0); /* wait until HW finish */ ++ ++ dev = connection->dev; ++ if (!dev) ++ printk("%s::conn dev NULL!\n", __func__); ++ tcp_qid = connection->qid; ++ toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE + ++ tcp_qid * sizeof(TOE_QHDR_T)); ++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1); ++ toeq_wptr = toe_qhdr->word1.bits.wptr; ++ timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr; ++ ++ if (toeq_rwptr.bits.rptr == toeq_wptr) { ++ if (toe_qhdr->word5.bits32) { ++ // shall we check toe_qhdr->word2.bits? ++ skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL); ++ skb_put(skb, 54); ++ skb->dev = connection->dev; ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ skb->protocol = eth_type_trans(skb, connection->dev); ++ netif_rx(skb); ++ connection->dev->last_rx = jiffies; ++ } ++ } else { ++ while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) { ++ /* we just simply send those packets to tcp? */ ++ toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid] ++ + toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T)); ++ connection->curr_desc = toe_curr_desc; ++ if (toe_curr_desc->word3.bits.ctrl_flag) { ++ printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n", ++ __func__, toe_curr_desc->word3.bits32, ++ connection->toeq_rwptr.bits.rptr, timeout_descs, ++ (u32)jiffies, (u32)connection->last_rx_jiffies); ++ } ++ desc_count = toe_curr_desc->word0.bits.desc_count; ++ pkt_size = toe_curr_desc->word1.bits.byte_count; ++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size, ++ PCI_DMA_FROMDEVICE); ++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)- ++ SKB_RESERVE_BYTES)); ++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02); ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, RX_INSERT_BYTES); ++ skb_put(skb, pkt_size); ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ { ++ struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]); ++ if (toe_curr_desc->word3.bits.ctrl_flag) ++ printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id)); ++ } ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ ++ netif_rx(skb); ++ dev->last_rx = jiffies; ++#if 0 ++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { ++ printk("%s::alloc buf fail!\n", __func__); ++ } ++ *(unsigned int*)(skb->data) = (unsigned int)skb; ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); ++ spin_lock_irqsave(&connection->gmac->rx_mutex, flags); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) { ++ mac_stop_txdma((struct net_device*)connection->dev); ++ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags); ++ while(1); ++ } ++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr; ++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); ++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM); ++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); ++ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32; ++ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags); ++#endif ++// spin_lock_irqsave(&connection->gmac->rx_mutex, flags); ++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM); ++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr); ++// spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags); ++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32; ++ } ++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1); ++// toe_gmac_fill_free_q(); ++ } ++ connection->last_rx_jiffies = jiffies; ++ if (connection->status != TCP_CONN_CLOSED) ++ mod_timer(&connection->rx_timer, jiffies+2); ++ if (connection->status != TCP_CONN_ESTABLISHED) ++ printk("%s::conn status %x\n", __func__, connection->status); ++ hash_set_valid_flag(connection->hash_entry_index, 1); ++ enable_irq(connection->gmac->irq); ++ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags); ++ } ++} ++ ++/*--------------------------------------------------------------------------- ++ * free_toeq_descs ++ *-------------------------------------------------------------------------*/ ++void free_toeq_descs(int qid, TOE_INFO_T *toe) ++{ ++ void *desc_ptr; ++ ++ desc_ptr = (void*)toe->toe_desc_base[qid]; ++ pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr, ++ (dma_addr_t)toe->toe_desc_base_dma[qid]); ++ toe->toe_desc_base[qid] = 0; ++} ++ ++/*--------------------------------------------------------------------------- ++ * set_toeq_hdr ++ *-------------------------------------------------------------------------*/ ++void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev) ++{ ++ volatile TOE_QHDR_T *toe_qhdr; ++ volatile unsigned int toeq_wptr; // toeq_rptr ++ volatile GMAC_RXDESC_T *toe_curr_desc; ++ struct sk_buff *skb; ++ unsigned int pkt_size; ++ DMA_RWPTR_T toeq_rwptr; ++ ++ if (connection->status == TCP_CONN_CLOSING) { ++ connection->status = TCP_CONN_CLOSED; ++ hash_set_valid_flag(connection->hash_entry_index, 0); ++ // remove timer first. ++ // del_timer_sync(&(connection->rx_timer)); ++ // check if any queued frames last time. ++ toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE; ++ toe_qhdr += connection->qid; ++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1); ++ ++ //toeq_rptr = toe_qhdr->word1.bits.rptr; ++ toeq_wptr = toe_qhdr->word1.bits.wptr; ++ while (toeq_rwptr.bits.rptr != toeq_wptr) { ++ printk("%s::pending frames in TOE Queue before closing!\n", __func__); ++ toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] + ++ toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T)); ++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc; ++ pkt_size = toe_curr_desc->word1.bits.byte_count; ++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size, ++ PCI_DMA_FROMDEVICE); ++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) - ++ SKB_RESERVE_BYTES)); ++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03); ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, RX_INSERT_BYTES); ++ skb_put(skb, pkt_size); ++ skb->dev = connection->dev; ++ skb->protocol = eth_type_trans(skb, connection->dev); ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ netif_rx(skb); ++ connection->dev->last_rx = jiffies; ++ ++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM); ++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr); ++ } ++ free_toeq_descs(connection->qid, toe); ++ // shall we re-fill free queue? ++ ++ reset_connection_index(connection->qid); ++ //memset(connection, 0, sizeof(struct toe_conn)); ++ printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid); ++ return; ++ } ++ /* enable or setup toe queue header */ ++ if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) { ++ volatile TOE_QHDR_T *qhdr; ++ int iq_id; ++ connection->status = TCP_CONN_ESTABLISHED; ++ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE + ++ connection->qid * sizeof(TOE_QHDR_T)); ++ ++ iq_id = get_interrupt_queue_id(connection->qid); ++ connection->dev = dev; ++ connection->gmac = dev->priv; ++ connection->toeq_rwptr.bits32 = 0; ++ ++// qhdr->word6.bits.iq_num = iq_id; ++ qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word. ++ qhdr->word7.bits.AckThreshold = connection->ack_threshold; ++ qhdr->word7.bits.SeqThreshold = connection->seq_threshold; ++ ++ // init timer. ++#if 1 ++ init_timer(&connection->rx_timer); ++ connection->rx_timer.expires = jiffies + 5; ++ connection->rx_timer.data = (unsigned long)connection; ++ connection->rx_timer.function = (void *)&connection_rx_timer; ++ add_timer(&connection->rx_timer); ++ connection->last_rx_jiffies = jiffies; ++ printk("init_timer %x\n", (u32)jiffies); ++#endif ++ hash_set_valid_flag(connection->hash_entry_index, 1); ++ return; ++ } else { ++ printk("%s::conn status %x, rx_pktsize %d\n", ++ __func__, connection->status, storlink_ctl.rx_max_pktsize); ++ } ++} ++ ++/*--------------------------------------------------------------------------- ++ * get_connection_index ++ * get_connection_index will find an available index for the connection, ++ * when allocate a new connection is needed. ++ * we find available Qid from AV bits and write to hash_table, so that when RxTOE ++ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q. ++ *-------------------------------------------------------------------------*/ ++int get_connection_index(void) ++{ ++ int i=0, j=0, index=-1; ++ __u32 connection_bits; ++ ++ for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) { ++ connection_bits = ~(toe_connection_bits[i]); ++ if (connection_bits == 0) ++ // all 32 bits are used. ++ continue; ++ ++ for (j=0; j<32; j++) { ++ if (connection_bits & 0x01) { ++ index = i*32 + j; ++ return index; ++ } ++ connection_bits = connection_bits >> 1; ++ } ++ } ++ return index; ++} ++ ++/*--------------------------------------------------------------------------- ++ * set_toe_connection ++ *-------------------------------------------------------------------------*/ ++void set_toe_connection(int index, int val) ++{ ++ if (val) { ++ toe_connection_bits[index/32] |= (1<<(index%32)); ++ } else { ++ toe_connection_bits[index/32] &= (~(1<<(index%32))); ++ } ++} ++ ++/*--------------------------------------------------------------------------- ++ * sl351x_get_toe_conn_flag ++ *-------------------------------------------------------------------------*/ ++int sl351x_get_toe_conn_flag(int index) ++{ ++ if (index < TOE_TOE_QUEUE_NUM) ++ return (toe_connection_bits[index/32] & (1 << (index %32))); ++ else ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------- ++ * sl351x_get_toe_conn_info ++ *-------------------------------------------------------------------------*/ ++struct toe_conn * sl351x_get_toe_conn_info(int index) ++{ ++ if (index < TOE_TOE_QUEUE_NUM) ++ return (struct toe_conn *)&toe_connections[index]; ++ else ++ return NULL; ++} ++ ++/*--------------------------------------------------------------------------- ++ * create_sw_toe_connection ++ *-------------------------------------------------------------------------*/ ++struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr, ++ struct tcphdr* tcp_hdr) ++{ ++ struct toe_conn* connection = &(toe_connections[qid]); ++ ++ connection->ip_ver = (__u8)ip_ver; ++ connection->qid = (__u8)qid; ++ connection->source = (__u16)tcp_hdr->source; ++ connection->dest = (__u16)tcp_hdr->dest; ++ if (ip_ver == 4) { ++ struct iphdr* iph = (struct iphdr*) ip_hdr; ++ connection->saddr[0] = (__u32)iph->saddr; ++ connection->daddr[0] = (__u32)iph->daddr; ++// printk("%s::saddr %x, daddr %x\n", __func__, ++// ntohl(connection->saddr[0]), ntohl(connection->daddr[0])); ++ } else if (ip_ver == 6) { ++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr; ++ int i=0; ++ for (i=0; i<4; i++) { ++ connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i]; ++ connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i]; ++ } ++ } ++ connection->status = TCP_CONN_CREATION; ++ return connection; ++} ++ ++/*--------------------------------------------------------------------------- ++ * fill_toeq_buf ++ *-------------------------------------------------------------------------*/ ++int fill_toeq_buf(int index, TOE_INFO_T* toe) ++{ ++ volatile TOE_QHDR_T *qhdr; ++ //struct toe_conn* connection; ++ GMAC_RXDESC_T *desc_ptr; ++ ++ if (!toe->toe_desc_base[index]) { ++ // first time. init. ++ desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM ++ *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index])); ++ ++ toe->toe_desc_num = TOE_TOE_DESC_NUM; ++ toe->toe_desc_base[index] = (unsigned int)desc_ptr; ++ } ++ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE + ++ index*sizeof(TOE_QHDR_T)); ++ //connection = (struct toe_conn*)&(toe_connections[index]); ++ ++ qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK) ++ | TOE_TOE_DESC_POWER; ++ qhdr->word1.bits32 = 0; ++ qhdr->word2.bits32 = 0; ++ qhdr->word3.bits32 = 0; ++ qhdr->word4.bits32 = 0; ++ qhdr->word5.bits32 = 0; ++ return 1; ++} ++ ++/*--------------------------------------------------------------------------- ++ * create_toe_hash_entry_smb ++ * add SMB header in hash entry. ++ *-------------------------------------------------------------------------*/ ++int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, ++ int sw_id) ++{ ++ HASH_ENTRY_T hash_entry, *entry; ++ int hash_entry_index; ++ int i; ++ ++ entry = (HASH_ENTRY_T*)&hash_entry; ++ memset((void*)entry, 0, sizeof(HASH_ENTRY_T)); ++ entry->rule = 0; ++ ++ /* enable fields of hash key */ ++ entry->key_present.ip_protocol = 1; ++ entry->key_present.sip = 1; ++ entry->key_present.dip = 1; ++ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port ++ entry->key_present.l7_bytes_0_3 = 0; // do we need to enable NETBIOS? how? ++ entry->key_present.l7_bytes_4_7 = 1; // "SMB" header ++ ++ /* hash key */ ++ entry->key.ip_protocol = IPPROTO_TCP; ++ if (ip_ver == 4) { ++ struct iphdr *iph = (struct iphdr*)ip_hdr; ++ memcpy(entry->key.sip, &iph->saddr, 4); ++ memcpy(entry->key.dip, &iph->daddr, 4); ++ } else if (ip_ver == 6) { ++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr; ++ for (i=0; i<4; i++) { ++ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4); ++ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4); ++ } ++ } ++ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source; ++ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest; ++ ++ entry->key.l7_bytes[4] = 0xff; ++ entry->key.l7_bytes[5] = 0x53; ++ entry->key.l7_bytes[6] = 0x4d; ++ entry->key.l7_bytes[7] = 0x42; ++ ++ /* action of hash entry match */ ++ entry->action.sw_id = 1; ++ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id); ++ entry->action.srce_qid = 0; ++ hash_entry_index = hash_add_toe_entry(entry); ++ ++ return hash_entry_index; ++} ++ ++// best performance of tcp streaming. ++/*--------------------------------------------------------------------------- ++ * create_toe_hash_entry_smb ++ * add SMB header in hash entry. ++ *-------------------------------------------------------------------------*/ ++int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr) ++{ ++ return 0; ++} ++ ++// is hash entry for nfs needed? ++ ++/* ++ * Create a TOE hash entry by given ip addresses and tcp port numbers. ++ * hash entry index will be saved in sw connection. ++ */ ++/*--------------------------------------------------------------------------- ++ * create_toe_hash_entry ++ *-------------------------------------------------------------------------*/ ++int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id) ++{ ++ HASH_ENTRY_T hash_entry, *entry; ++// unsigned long hash_key[HASH_MAX_DWORDS]; ++ int hash_entry_index; ++ ++ entry = (HASH_ENTRY_T*) &hash_entry; ++ memset((void*)entry, 0, sizeof(HASH_ENTRY_T)); ++ entry->rule = 0; ++ /* enable fields of hash key */ ++ entry->key_present.ip_protocol = 1; ++ entry->key_present.sip = 1; ++ entry->key_present.dip = 1; ++ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port ++ ++ /* hash key */ ++ entry->key.ip_protocol = IPPROTO_TCP; ++ if (ip_ver == 4) { ++ // key of ipv4 ++ struct iphdr* iph = (struct iphdr*)ip_hdr; ++ memcpy(entry->key.sip, &iph->saddr, 4); ++ memcpy(entry->key.dip, &iph->daddr, 4); ++ } else if (ip_ver == 6) { ++ // key of ipv6 ++ int i=0; ++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr; ++ for (i=0; i<4; i++) { ++ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4); ++ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4); ++ } ++ } ++ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source; ++ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest; ++ // is it necessary to write ip version to hash key? ++ ++ /* action of hash entry match */ ++ entry->action.sw_id = 1; ++ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id); ++ entry->action.srce_qid = 0; // 0 for SW FreeQ. 1 for HW FreeQ. ++ hash_entry_index = hash_add_toe_entry(entry); ++// printk("\n%s. sw_id %d, hash_entry index %x\n", ++// __func__, TOE_TOE_QID(sw_id), hash_entry_index); ++ return hash_entry_index; ++} ++ ++/*--------------------------------------------------------------------------- ++ * init_toeq ++ * 1. Reserve a TOE Queue id first, to get the sw toe_connection. ++ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index ++ * in sw toe_connection. ++ * 3. Prepare sw toe_connection and allocate buffers. ++ * 4. Validate hash entry. ++ *-------------------------------------------------------------------------*/ ++struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, ++ TOE_INFO_T* toe, unsigned char* l2hdr) ++{ ++// printk("\t*** %s, ipver %d\n", __func__, ipver); ++ int qid=-1; ++ struct toe_conn* connection; ++ int hash_entry_index; ++ // int i=0; ++ unsigned short dest_port = ntohs(tcp_hdr->dest); ++ ++ if (dest_port == 445) { ++ printk("%s::SMB/CIFS connection\n", __func__); ++ } else if (dest_port == 20) { ++ printk("%s::ftp-data connection\n", __func__); ++ } else if (dest_port == 2049) { ++ printk("%s::nfs daemon connection\n", __func__); ++ } ++ qid = get_connection_index(); ++ if (qid<0) ++ return 0; // setup toeq failure ++ set_toe_connection(qid, 1); // reserve this sw toeq. ++ ++ //connection = (struct toe_conn*)&(toe_connections[qid]); ++ hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid); ++ if (hash_entry_index <0) { ++ printk("%s::release toe hash entry!\n", __func__); ++ set_toe_connection(qid, 0); // release this sw toeq. ++ return 0; ++ } ++ connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr); ++ connection->hash_entry_index = (__u16) hash_entry_index; ++ ++ fill_toeq_buf(qid, toe); ++ memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr)); ++ spin_lock_init(&connection->conn_lock); ++ ++ return connection; ++} ++ ++#if 0 ++/*---------------------------------------------------------------------- ++* toe_init_toe_queue ++* (1) Initialize the TOE Queue Header ++* Register: TOE_TOE_QUE_HDR_BASE (0x60003000) ++* (2) Initialize Descriptors of TOE Queues ++*----------------------------------------------------------------------*/ ++void toe_init_toe_queue(TOE_INFO_T* toe) ++{ ++} ++EXPORT_SYMBOL(toe_init_toe_queue); ++#endif ++ ++/*--------------------------------------------------------------------------- ++ * dump_jumbo_skb ++ *-------------------------------------------------------------------------*/ ++void dump_jumbo_skb(struct jumbo_frame *jumbo_skb) ++{ ++ if (jumbo_skb->skb0) { ++// printk("%s. jumbo skb %x, len %d\n", ++// __func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len); ++ netif_rx(jumbo_skb->skb0); ++ } ++ jumbo_skb->skb0 = 0; ++ jumbo_skb->tail = 0; ++ jumbo_skb->iphdr0 = 0; ++ jumbo_skb->tcphdr0 = 0; ++} ++ ++/* --------------------------------------------------------------------- ++ * Append skb to skb0. skb0 is the jumbo frame that will be passed to ++ * kernel tcp. ++ * --------------------------------------------------------------------*/ ++void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len) ++{ ++ struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]); ++ int ip_hdrlen = iphdr0->ihl << 2; ++ struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]); ++ ++ if (!jumbo_skb->skb0) { ++ // head of the jumbo frame. ++ jumbo_skb->skb0 = skb; ++ jumbo_skb->tail = 0; ++ jumbo_skb->iphdr0 = iphdr0; ++ jumbo_skb->tcphdr0 = tcphdr0; ++ } else { ++ if (!jumbo_skb->tail) ++ skb_shinfo(jumbo_skb->skb0)->frag_list = skb; ++ else ++ (jumbo_skb->tail)->next = skb; ++ jumbo_skb->tail = skb; ++ ++ // do we need to change truesize as well? ++ jumbo_skb->skb0->len += payload_len; ++ jumbo_skb->skb0->data_len += payload_len; ++ ++ jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len); ++ jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq; ++ jumbo_skb->tcphdr0->window = tcphdr0->window; ++ ++ skb->len += payload_len; ++ skb->data_len = 0; ++ skb->data += ntohs(iphdr0->tot_len) - payload_len; ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* toe_gmac_handle_toeq ++* (1) read interrupt Queue to get TOE Q. ++* (2) get packet fro TOE Q and send to upper layer handler. ++* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled. ++*----------------------------------------------------------------------*/ ++void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status) ++{ ++ //volatile INTRQ_INFO_T *intrq_info; ++ //TOEQ_INFO_T *toeq_info; ++ volatile NONTOE_QHDR_T *intr_qhdr; ++ volatile TOE_QHDR_T *toe_qhdr; ++ volatile INTR_QHDR_T *intr_curr_desc; ++ TOE_INFO_T *toe = &toe_private_data; ++ ++ volatile GMAC_RXDESC_T *toe_curr_desc; // , *fq_desc;// *tmp_desc; ++ volatile DMA_RWPTR_T intr_rwptr, toeq_rwptr; // fq_rwptr; ++ ++ unsigned int pkt_size, desc_count, tcp_qid; ++ volatile unsigned int toeq_wptr; ++ struct toe_conn* connection; ++ int i, frag_id = 0; ++ // unsigned long toeq_flags; ++ struct jumbo_frame jumbo_skb; ++ struct sk_buff *skb; ++ __u32 interrupt_status; ++ ++ in_toe_isr++; ++ ++ interrupt_status = status >> 24; ++ // get interrupt queue header ++ intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE; ++ memset(&jumbo_skb, 0, sizeof(struct jumbo_frame)); ++ ++ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, intr_qhdr++) { ++ if (!(interrupt_status & 0x0001)) { ++ // no interrupt of this IntQ ++ interrupt_status = interrupt_status >> 1; ++ continue; ++ } ++ interrupt_status = interrupt_status >> 1; ++ intr_rwptr.bits32 = readl(&intr_qhdr->word1); ++ ++ while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) { ++ int max_pktsize = 1; ++ // get interrupt queue descriptor. ++ intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base + ++ i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr; ++// printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32); ++ // get toeq id ++ tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0); ++ // get toeq queue header ++ toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE; ++ toe_qhdr += tcp_qid; ++ connection = &toe_connections[tcp_qid]; ++ del_timer(&connection->rx_timer); ++ // Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags); ++ // handling interrupts of this TOE Q. ++ if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq || ++ intr_curr_desc->word1.bits.abn) ++ max_pktsize = 0; ++ if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) { ++ desc_count=0; ++ // wptr in intl queue is where this TOE interrupt should stop. ++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1); ++ toeq_wptr = intr_curr_desc->word0.bits.wptr; ++ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr) ++ printk("conn rptr %d, hw rptr %d\n", ++ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr); ++ ++ if (intr_curr_desc->word1.bits.ctl && ++ (toeq_rwptr.bits.rptr == toeq_wptr)) { ++ printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n", ++ connection->toeq_rwptr.bits.rptr, toeq_wptr); ++// dump_toe_qhdr(toe_qhdr); ++// dump_intrq_desc(intr_curr_desc); ++ } ++ // while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) { ++ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) { ++ frag_id++; ++ toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid] ++ + toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T)); ++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc; ++ desc_count = toe_curr_desc->word0.bits.desc_count; ++ pkt_size = toe_curr_desc->word1.bits.byte_count; ++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size, ++ PCI_DMA_FROMDEVICE); ++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)- ++ SKB_RESERVE_BYTES)); ++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01); ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, RX_INSERT_BYTES); ++ if ((skb->len + pkt_size) > (1514+16)) ++ { ++ printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size); ++ while(1); ++ } ++ ++ skb_put(skb, pkt_size); ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ ++ if (toe_curr_desc->word3.bits32 & 0x1b000000) ++ dump_jumbo_skb(&jumbo_skb); ++ ++ rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset); ++// spin_lock_irqsave(&gmac_fq_lock, flags); ++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM); ++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr); ++// spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ if (storlink_ctl.fqint_threshold) ++ continue; ++#if 0 ++//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL) ++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { ++ printk("%s::toe queue alloc buffer ", __func__); ++ } ++ *(unsigned int*)(skb->data) = (unsigned int)skb; ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); ++ ++ spin_lock_irqsave(&gmac_fq_lock, flags); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) { ++ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32); ++ mac_stop_txdma((struct net_device*) tp->dev); ++ spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ while(1); ++ } ++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr; ++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); ++ ++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM); ++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); ++ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32; ++ spin_unlock_irqrestore(&gmac_fq_lock, flags); ++#endif ++ } // end of this multi-desc. ++ dump_jumbo_skb(&jumbo_skb); ++ dev->last_rx = jiffies; ++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32; ++ } else if (intr_curr_desc->word1.bits.sat) { ++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1); ++ toeq_wptr = intr_curr_desc->word0.bits.wptr; ++ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr) ++ printk("SAT. conn rptr %d, hw rptr %d\n", ++ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr); ++/* ++ printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n", ++ __func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt, ++ toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/ ++ /* pure ack */ ++ if (toeq_rwptr.bits.rptr == toeq_wptr) { ++ if (intr_curr_desc->word4.bits32) { ++ skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc); ++ skb_put(skb, 60); ++ skb->dev = connection->dev; ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ skb->protocol = eth_type_trans(skb, connection->dev); ++ netif_rx(skb); ++ } else ++ printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__); ++ } else { ++ // while (toeq_rwptr.bits.rptr != toeq_wptr) { ++ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) { ++ toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid] ++ + toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T)); ++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc; ++ desc_count = toe_curr_desc->word0.bits.desc_count; ++ pkt_size = toe_curr_desc->word1.bits.byte_count; ++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size, ++ PCI_DMA_FROMDEVICE); ++ // if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) { ++ if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) { ++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) - ++ SKB_RESERVE_BYTES)); ++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04); ++ connection->curr_rx_skb = skb; ++ skb_reserve(skb, RX_INSERT_BYTES); ++ skb_put(skb, pkt_size); ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ // printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr); ++ netif_rx(skb); ++ dev->last_rx = jiffies; ++/* ++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { ++ ++ } ++ *(unsigned int*)(skb->data) = (unsigned int) skb; ++ skb_reserve(skb, SKB_RESERVE_BYTES); */ ++ } else { ++ // reuse this skb, append to free queue.. ++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)- ++ SKB_RESERVE_BYTES)); ++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05); ++ connection->curr_rx_skb = skb; ++ dev_kfree_skb_irq(skb); ++ } ++#if 0 ++ spin_lock_irqsave(&gmac_fq_lock, flags); ++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++/* if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) { ++ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32); ++ mac_stop_txdma((struct net_device*) tp->dev); ++ spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ while(1); ++ } */ ++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr; ++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); ++ ++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM); ++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); ++ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32; ++ // spin_unlock_irqrestore(&gmac_fq_lock, flags); ++#endif ++// spin_lock_irqsave(&gmac_fq_lock, flags); ++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM); ++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr); ++// spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ } ++ } // end of ACK with options. ++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32; ++ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags); ++// } ++ }; ++ update_timer(connection); ++ // any protection against interrupt queue header? ++ intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM); ++ SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr); ++ intr_rwptr.bits32 = readl(&intr_qhdr->word1); ++ toe_gmac_fill_free_q(); ++ } // end of this interrupt Queue processing. ++ } // end of all interrupt Queues. ++ ++ in_toe_isr = 0; ++} ++ ++ +Index: linux-2.6.23.16/drivers/net/sl_lepus_hash.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl_lepus_hash.c 2008-03-15 16:59:57.863423587 +0200 +@@ -0,0 +1,553 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl_lepus_hash.c ++* Description : ++* Handle Storlink Lepus Hash Functions ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* 03/13/2006 Gary Chen Create and implement ++* ++****************************************************************************/ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/compiler.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/delay.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/completion.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/semaphore.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/it8712.h> ++#include <linux/mtd/kvctl.h> ++#include <linux/skbuff.h> ++#include <linux/ip.h> ++#include <linux/tcp.h> ++#include <linux/list.h> ++#define MIDWAY ++#define SL_LEPUS ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/sl_lepus_gmac.h> ++#include <asm/arch/sl_hash_cfg.h> ++ ++#ifndef RXTOE_DEBUG ++#define RXTOE_DEBUG ++#endif ++#undef RXTOE_DEBUG ++ ++/*---------------------------------------------------------------------- ++* Definition ++*----------------------------------------------------------------------*/ ++#define hash_printf printk ++ ++#define HASH_TIMER_PERIOD (60*HZ) // seconds ++#define HASH_ILLEGAL_INDEX 0xffff ++ ++/*---------------------------------------------------------------------- ++* Variables ++*----------------------------------------------------------------------*/ ++u32 hash_activate_bits[HASH_TOTAL_ENTRIES/32]; ++u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32]; ++char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16))); ++static struct timer_list hash_timer_obj; ++LIST_HEAD(hash_timeout_list); ++ ++/*---------------------------------------------------------------------- ++* Functions ++*----------------------------------------------------------------------*/ ++void dm_long(u32 location, int length); ++static void hash_timer_func(u32 data); ++ ++/*---------------------------------------------------------------------- ++* hash_init ++*----------------------------------------------------------------------*/ ++void hash_init(void) ++{ ++ int i; ++ volatile u32 *dp1, *dp2, dword; ++ ++ dp1 = (volatile u32 *) TOE_V_BIT_BASE; ++ dp2 = (volatile u32 *) TOE_A_BIT_BASE; ++ ++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++) ++ { ++ *dp1++ = 0; ++ dword = *dp2++; // read-clear ++ } ++ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits)); ++ memset((void *)&hash_tables, 0, sizeof(hash_tables)); ++ ++ init_timer(&hash_timer_obj); ++ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD; ++ hash_timer_obj.data = (unsigned long)&hash_timer_obj; ++ hash_timer_obj.function = (void *)&hash_timer_func; ++ add_timer(&hash_timer_obj); ++ ++#if (HASH_MAX_BYTES == 128) ++ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words ++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG); ++#elif (HASH_MAX_BYTES == 64) ++ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words ++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG); ++#else ++ #error Incorrect setting for HASH_MAX_BYTES ++#endif ++ ++} ++/*---------------------------------------------------------------------- ++* hash_add_entry ++*----------------------------------------------------------------------*/ ++int hash_add_entry(HASH_ENTRY_T *entry) ++{ ++ int rc; ++ u32 key[HASH_MAX_DWORDS]; ++ rc = hash_build_keys((u32 *)&key, entry); ++ if (rc < 0) ++ return -1; ++ hash_write_entry(entry, (unsigned char*) &key[0]); ++// hash_set_valid_flag(entry->index, 1); ++// printk("Dump hash key!\n"); ++// dump_hash_key(entry); ++ return entry->index; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_set_valid_flag ++*----------------------------------------------------------------------*/ ++void hash_set_valid_flag(int index, int valid) ++{ ++ register u32 reg32; ++ ++ reg32 = TOE_V_BIT_BASE + (index/32) * 4; ++ ++ if (valid) ++ { ++ writel(readl(reg32) | (1 << (index%32)), reg32); ++ } ++ else ++ { ++ writel(readl(reg32) & ~(1 << (index%32)), reg32); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* hash_set_nat_owner_flag ++*----------------------------------------------------------------------*/ ++void hash_set_nat_owner_flag(int index, int valid) ++{ ++ if (valid) ++ { ++ hash_nat_owner_bits[index/32] |= (1 << (index % 32)); ++ } ++ else ++ { ++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32)); ++ } ++} ++ ++ ++/*---------------------------------------------------------------------- ++* hash_build_keys ++*----------------------------------------------------------------------*/ ++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry) ++{ ++ u32 data; ++ unsigned char *cp; ++ int i, j; ++ unsigned short index; ++ int total; ++ ++ memset((void *)destp, 0, HASH_MAX_BYTES); ++ cp = (unsigned char *)destp; ++ ++ if (entry->key_present.port || entry->key_present.Ethertype) ++ { ++ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0 ++ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2 ++ HASH_PUSH_BYTE(cp, 0); // Byte 3 ++ } ++ else ++ { ++ HASH_PUSH_DWORD(cp, 0); ++ } ++ ++ if (entry->key_present.da || entry->key_present.sa) ++ { ++ unsigned char mac[4]; ++ if (entry->key_present.da) ++ { ++ for (i=0; i<4; i++) ++ HASH_PUSH_BYTE(cp, entry->key.da[i]); ++ } ++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0; ++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0; ++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0; ++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0; ++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24); ++ HASH_PUSH_DWORD(cp, data); ++ if (entry->key_present.sa) ++ { ++ for (i=2; i<6; i++) ++ HASH_PUSH_BYTE(cp, entry->key.sa[i]); ++ } ++ } ++ ++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id) ++ { ++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word ++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word ++ } ++ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0 ++ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1 ++ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2 ++ HASH_PUSH_BYTE(cp, 0); // Byte 3 ++ } ++ ++ if (entry->key_present.ipv6_flow_label) ++ { ++ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word ++ } ++ if (entry->key_present.sip) ++ { ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[i]); ++ if (entry->key.ipv6) ++ { ++ for (i=4; i<16; i+=4) ++ { ++ for (j=i+3; j>=i; j--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[j]); ++ } ++ } ++ } ++ if (entry->key_present.dip) ++ { ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[i]); ++ if (entry->key.ipv6) ++ { ++ for (i=4; i<16; i+=4) ++ { ++ for (j=i+3; j>=i; j--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[j]); ++ } ++ } ++ } ++ ++ if (entry->key_present.l4_bytes_0_3) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]); ++ } ++ if (entry->key_present.l4_bytes_4_7) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]); ++ } ++ if (entry->key_present.l4_bytes_8_11) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]); ++ } ++ if (entry->key_present.l4_bytes_12_15) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]); ++ } ++ if (entry->key_present.l4_bytes_16_19) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]); ++ } ++ if (entry->key_present.l4_bytes_20_23) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]); ++ } ++ if (entry->key_present.l7_bytes_0_3) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]); ++ } ++ if (entry->key_present.l7_bytes_4_7) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]); ++ } ++ if (entry->key_present.l7_bytes_8_11) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]); ++ } ++ if (entry->key_present.l7_bytes_12_15) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]); ++ } ++ if (entry->key_present.l7_bytes_16_19) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]); ++ } ++ if (entry->key_present.l7_bytes_20_23) ++ { ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]); ++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]); ++ } ++ ++ // get hash index ++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32)); ++ ++ if (total > HASH_MAX_KEY_DWORD) ++ { ++ //hash_printf("Total key words (%d) is too large (> %d)!\n", ++ // total, HASH_MAX_KEY_DWORD); ++ return -1; ++ } ++ ++ if (entry->key_present.port || entry->key_present.Ethertype) ++ index = hash_gen_crc16((unsigned char *)destp, total * 4); ++ else ++ { ++ if (total == 1) ++ { ++ hash_printf("No key is assigned!\n"); ++ return -1; ++ } ++ ++ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4); ++ } ++ ++ entry->index = index & HASH_BITS_MASK; ++ ++ //hash_printf("Total key words = %d, Hash Index= %d\n", ++ // total, entry->index); ++ ++ cp = (unsigned char *)destp; ++ cp+=3; ++ HASH_PUSH_BYTE(cp, entry->rule); // rule ++ ++ entry->total_dwords = total; ++ ++ return total; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_build_nat_keys ++*----------------------------------------------------------------------*/ ++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry) ++{ ++ unsigned char *cp; ++ int i; ++ unsigned short index; ++ int total; ++ ++ memset((void *)destp, 0, HASH_MAX_BYTES); ++ ++ cp = (unsigned char *)destp + 2; ++ HASH_PUSH_BYTE(cp, entry->key.port); ++ cp++; ++ ++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id) ++ { ++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word ++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word ++ } ++ ++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); ++ cp+=3; ++ ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.sip[i]); ++ ++ // input (entry->key.sip[i]) is network-oriented ++ // output (hash key) is host-oriented ++ for (i=3; i>=0; i--) ++ HASH_PUSH_BYTE(cp, entry->key.dip[i]); ++ ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]); ++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]); ++ ++ // get hash index ++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32)); ++ ++ index = hash_gen_crc16((unsigned char *)destp, total * 4); ++ entry->index = index & ((1 << HASH_BITS) - 1); ++ ++ cp = (unsigned char *)destp; ++ cp+=3; ++ HASH_PUSH_BYTE(cp, entry->rule); // rule ++ ++ entry->total_dwords = total; ++} ++ ++ ++/*---------------------------------------------------------------------- ++* hash_write_entry ++*----------------------------------------------------------------------*/ ++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key) ++{ ++ int i; ++ u32 *srcep, *destp, *destp2; ++ ++ srcep = (u32 *)key; ++ destp2 = destp = (u32 *)&hash_tables[entry->index][0]; ++ ++ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++) ++ *destp = *srcep; ++ ++ srcep = (u32 *)&entry->action; ++ *destp++ = *srcep; ++ ++ srcep = (u32 *)&entry->param; ++ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++) ++ *destp = *srcep; ++ ++ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32)); ++ ++ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE); ++ return 0; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_timer_func ++*----------------------------------------------------------------------*/ ++static void hash_timer_func(u32 data) ++{ ++ int i, j; ++ volatile u32 *active_p, *own_p, *valid_p; ++ u32 a_bits, own_bits; ++ ++ valid_p = (volatile u32 *)TOE_V_BIT_BASE; ++ active_p = (volatile u32 *)hash_activate_bits; ++ own_p = (volatile u32 *)hash_nat_owner_bits; ++ for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++) ++ { ++ *active_p |= readl(TOE_A_BIT_BASE + (i*4)); ++ a_bits = *active_p; ++ own_bits = *own_p; ++ if (own_bits) ++ { ++#ifndef DEBUG_NAT_MIXED_HW_SW_TX ++ a_bits = own_bits & ~a_bits; ++#else ++ a_bits = own_bits & a_bits; ++#endif ++ for (j=0; a_bits && j<32; j++) ++ { ++ if (a_bits & 1) ++ { ++ *valid_p &= ~(1 << j); // invalidate it ++#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT)) ++ *own_p &= ~(1 << j); // release ownership for NAT ++#endif ++// #ifdef DEBUG_NAT_MIXED_HW_SW_TX ++#if 0 ++ hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j); ++#endif ++ } ++ a_bits >>= 1; ++ } ++ *active_p &= ~own_bits; // deactivate it for next polling ++ } ++ } ++ ++ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD; ++ add_timer((struct timer_list *)data); ++} ++ ++/*---------------------------------------------------------------------- ++* dm_long ++*----------------------------------------------------------------------*/ ++void dm_long(u32 location, int length) ++{ ++ u32 *start_p, *curr_p, *end_p; ++ u32 *datap, data; ++ int i; ++ ++ //if (length > 1024) ++ // length = 1024; ++ ++ start_p = (u32 *)location; ++ end_p = (u32 *)location + length; ++ curr_p = (u32 *)((u32)location & 0xfffffff0); ++ datap = (u32 *)location; ++ while (curr_p < end_p) ++ { ++ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0); ++ for (i=0; i<4; i++) ++ { ++ if (curr_p < start_p || curr_p >= end_p) ++ hash_printf(" "); ++ else ++ { ++ data = *datap; ++ hash_printf("%08X ", data); ++ } ++ if (i==1) ++ hash_printf("- "); ++ ++ curr_p++; ++ datap++; ++ } ++ hash_printf("\n"); ++ } ++} ++ ++/*---------------------------------------------------------------------- ++* hash_dump_entry ++*----------------------------------------------------------------------*/ ++void hash_dump_entry(int index) ++{ ++ hash_printf("Hash Index %d:\n", index); ++ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS); ++} ++ ++ +Index: linux-2.6.23.16/drivers/net/sl_switch.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/net/sl_switch.c 2008-03-15 17:00:08.364022040 +0200 +@@ -0,0 +1,650 @@ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/delay.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++ ++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++}; ++ ++#define GMAC_SPEED_10 0 ++#define GMAC_SPEED_100 1 ++#define GMAC_SPEED_1000 2 ++ ++enum phy_state ++{ ++ LINK_DOWN = 0, ++ LINK_UP = 1 ++}; ++ ++#ifndef BIT ++#define BIT(x) (1 << (x)) ++#endif ++ ++//int Get_Set_port_status(); ++unsigned int SPI_read_bit(void); ++void SPI_write_bit(char bit_EEDO); ++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value); ++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr); ++int SPI_default(void); ++void SPI_CS_enable(unsigned char enable); ++unsigned int SPI_get_identifier(void); ++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val); ++unsigned int phy_read(unsigned char port_no,unsigned char reg); ++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask); ++void init_seq_7385(unsigned char port_no) ; ++void phy_receiver_init (unsigned char port_no); ++ ++#define PORT_NO 4 ++int switch_pre_speed[PORT_NO]={0,0,0,0}; ++int switch_pre_link[PORT_NO]={0,0,0,0}; ++ ++ ++ ++ ++ ++/* NOTES ++ * The Protocol of the SPI are as follows: ++ * ++ * Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 ++ * byte0 | Block id | r/w | sub-block | ++ * byte1 | Address | ++ * byte2 | Data | ++ * byte3 | Data | ++ * byte4 | Data | ++ * byte5 | Data | ++ */ ++ ++ ++ ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define GPIO_EECS 0x80000000 /* EECS: GPIO[22] */ ++#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/ ++#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/ ++#define GPIO_EECK 0x10000000 /* EECK: GPIO[31] */ ++ ++/************************************************************* ++* SPI protocol for ADM6996 control ++**************************************************************/ ++#define SPI_OP_LEN 0x08 // the length of start bit and opcode ++#define SPI_OPWRITE 0X05 // write ++#define SPI_OPREAD 0X06 // read ++#define SPI_OPERASE 0X07 // erase ++#define SPI_OPWTEN 0X04 // write enable ++#define SPI_OPWTDIS 0X04 // write disable ++#define SPI_OPERSALL 0X04 // erase all ++#define SPI_OPWTALL 0X04 // write all ++ ++#define SPI_ADD_LEN 8 // bits of Address ++#define SPI_DAT_LEN 32 // bits of Data ++ ++ ++/****************************************/ ++/* Function Declare */ ++/****************************************/ ++ ++//unsigned int SPI_read_bit(void); ++//void SPI_write_bit(char bit_EEDO); ++//unsigned int SPI_read_bit(void); ++/****************************************** ++* SPI_write ++* addr -> Write Address ++* value -> value to be write ++***************************************** */ ++void phy_receiver_init (unsigned char port_no) ++{ ++ phy_write(port_no,31,0x2a30); ++ phy_write_masked(port_no, 12, 0x0200, 0x0300); ++ phy_write(port_no,31,0); ++} ++ ++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val) ++{ ++ unsigned int cmd; ++ ++ cmd = (port_no<<21)|(reg<<16)|val; ++ SPI_write(3,0,1,cmd); ++} ++ ++unsigned int phy_read(unsigned char port_no,unsigned char reg) ++{ ++ unsigned int cmd,reg_val; ++ ++ cmd = BIT(26)|(port_no<<21)|(reg<<16); ++ SPI_write(3,0,1,cmd); ++ msleep(2); ++ reg_val = SPI_read(3,0,2); ++ return reg_val; ++} ++ ++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask) ++{ ++ unsigned int cmd,reg_val; ++ ++ cmd = BIT(26)|(port_no<<21)|(reg<<16); // Read reg_val ++ SPI_write(3,0,1,cmd); ++ mdelay(2); ++ reg_val = SPI_read(3,0,2); ++ reg_val &= ~mask; // Clear masked bit ++ reg_val |= (val&mask) ; // set masked bit ,if true ++ cmd = (port_no<<21)|(reg<<16)|reg_val; ++ SPI_write(3,0,1,cmd); ++} ++ ++void init_seq_7385(unsigned char port_no) ++{ ++ unsigned char rev; ++ ++ phy_write(port_no, 31, 0x2a30); ++ phy_write_masked(port_no, 8, 0x0200, 0x0200); ++ phy_write(port_no, 31, 0x52b5); ++ phy_write(port_no, 16, 0xb68a); ++ phy_write_masked(port_no, 18, 0x0003, 0xff07); ++ phy_write_masked(port_no, 17, 0x00a2, 0x00ff); ++ phy_write(port_no, 16, 0x968a); ++ phy_write(port_no, 31, 0x2a30); ++ phy_write_masked(port_no, 8, 0x0000, 0x0200); ++ phy_write(port_no, 31, 0x0000); /* Read revision */ ++ rev = phy_read(port_no, 3) & 0x000f; ++ if (rev == 0) ++ { ++ phy_write(port_no, 31, 0x2a30); ++ phy_write_masked(port_no, 8, 0x0200, 0x0200); ++ phy_write(port_no, 31, 0x52b5); ++ phy_write(port_no, 18, 0x0000); ++ phy_write(port_no, 17, 0x0689); ++ phy_write(port_no, 16, 0x8f92); ++ phy_write(port_no, 31, 0x52B5); ++ phy_write(port_no, 18, 0x0000); ++ phy_write(port_no, 17, 0x0E35); ++ phy_write(port_no, 16, 0x9786); ++ phy_write(port_no, 31, 0x2a30); ++ phy_write_masked(port_no, 8, 0x0000, 0x0200); ++ phy_write(port_no, 23, 0xFF80); ++ phy_write(port_no, 23, 0x0000); ++ } ++ phy_write(port_no, 31, 0x0000); ++ phy_write(port_no, 18, 0x0048); ++ if (rev == 0) ++ { ++ phy_write(port_no, 31, 0x2a30); ++ phy_write(port_no, 20, 0x6600); ++ phy_write(port_no, 31, 0x0000); ++ phy_write(port_no, 24, 0xa24e); ++ } ++ else ++ { ++ phy_write(port_no, 31, 0x2a30); ++ phy_write_masked(port_no, 22, 0x0240, 0x0fc0); ++ phy_write_masked(port_no, 20, 0x4000, 0x6000); ++ phy_write(port_no, 31, 1); ++ phy_write_masked(port_no, 20, 0x6000, 0xe000); ++ phy_write(port_no, 31, 0x0000); ++ } ++} ++ ++int Get_Set_port_status() ++{ ++ unsigned int reg_val,ability,rcv_mask,mac_config; ++ int is_link=0; ++ int i; ++ ++ rcv_mask = SPI_read(2,0,0x10); // Receive mask ++ ++ for(i=0;i<4;i++){ ++ reg_val = phy_read(i,1); ++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */ ++ { ++ is_link=1; ++ if(switch_pre_link[i]==LINK_DOWN){ // Link Down ==> Link up ++ ++ rcv_mask |= BIT(i); // Enable receive ++ ++ reg_val = phy_read(i,10); ++ if(reg_val & 0x0c00){ ++ printk("Port%d:Giga mode\n",i); ++// SPI_write(1,i,0x00,0x300701B1); ++ mac_config = 0x00060004|(6<<6); ++ ++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port ++ mac_config |= (( BIT(i) << 19) | 0x08000000); ++ SPI_write(1,i,0x00,mac_config); ++ SPI_write(1,i,0x04,0x000300ff); // flow control ++ ++ reg_val = SPI_read(5,0,0x12); ++ reg_val &= ~BIT(i); ++ SPI_write(5,0,0x12,reg_val); ++ ++ reg_val = SPI_read(1,i,0x00); ++ reg_val |= 0x10010000; ++ SPI_write(1,i,0x00,reg_val); ++// SPI_write(1,i,0x00,0x10070181); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_1000; ++ } ++ else{ ++ reg_val = phy_read(i,5); ++ ability = (reg_val&0x5e0) >>5; ++ if ((ability & 0x0C)) /* 100M */ ++ { ++// SPI_write(1,i,0x00,0x30050472); ++ if((ability&0x08)==0) // Half ++ mac_config = 0x00040004 |(17<<6); ++ else // Full ++ mac_config = 0x00040004 |(17<<6); ++ ++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port ++ mac_config |= (( BIT(i) << 19) | 0x08000000); ++ SPI_write(1,i,0x00,mac_config); ++ SPI_write(1,i,0x04,0x000300ff); // flow control ++ ++ reg_val = SPI_read(5,0,0x12); ++ reg_val &= ~BIT(i); ++ SPI_write(5,0,0x12,reg_val); ++ ++ reg_val = SPI_read(1,i,0x00); ++ reg_val &= ~0x08000000; ++ reg_val |= 0x10010000; ++ SPI_write(1,i,0x00,reg_val); ++// SPI_write(1,i,0x00,0x10050442); ++ printk("Port%d:100M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_100; ++ } ++ else if((ability & 0x03)) /* 10M */ ++ { ++// SPI_write(1,i,0x00,0x30050473); ++ if((ability&0x2)==0) // Half ++ mac_config = 0x00040004 |(17<<6); ++ else // Full ++ mac_config = 0x00040004 |(17<<6); ++ ++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port ++ mac_config |= (( BIT(i) << 19) | 0x08000000); ++ SPI_write(1,i,0x00,mac_config); ++ SPI_write(1,i,0x04,0x000300ff); // flow control ++ ++ reg_val = SPI_read(5,0,0x12); ++ reg_val &= ~BIT(i); ++ SPI_write(5,0,0x12,reg_val); ++ ++ reg_val = SPI_read(1,i,0x00); ++ reg_val &= ~0x08000000; ++ reg_val |= 0x10010000; ++ SPI_write(1,i,0x00,reg_val); ++// SPI_write(1,i,0x00,0x10050443); ++ printk("Port%d:10M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ } ++ else{ ++ SPI_write(1,i,0x00,0x20000030); ++ printk("Port%d:Unknown mode\n",i); ++ switch_pre_link[i]=LINK_DOWN; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ } ++ } ++ } ++ else{ // Link up ==> Link UP ++ ++ } ++ } ++ else{ // Link Down ++ if(switch_pre_link[i]==LINK_UP){ ++ printk("Port%d:Link Down\n",i); ++ //phy_receiver_init(i); ++ reg_val = SPI_read(1,i,0); ++ reg_val &= ~BIT(16); ++ SPI_write(1,i,0x00,reg_val); // disable RX ++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet ++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty ++ msleep(1); ++ SPI_write(1,i,0x00,0x20000030); // PORT_RST ++ SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet ++ ++ reg_val = SPI_read(5,0,0x12); ++ reg_val |= BIT(i); ++ SPI_write(5,0,0x12,reg_val); ++ } ++ switch_pre_link[i]=LINK_DOWN; ++ rcv_mask &= ~BIT(i); // disable receive ++ } ++ } ++ ++ SPI_write(2,0,0x10,rcv_mask); // Receive mask ++ return is_link; ++ ++} ++EXPORT_SYMBOL(Get_Set_port_status); ++ ++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value) ++{ ++ int i; ++ char bit; ++ unsigned int data; ++ ++ SPI_CS_enable(1); ++ ++ data = (block<<5) | 0x10 | subblock; ++ ++ //send write command ++ for(i=SPI_OP_LEN-1;i>=0;i--) ++ { ++ bit = (data>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ ++ // send 8 bits address (MSB first, LSB last) ++ for(i=SPI_ADD_LEN-1;i>=0;i--) ++ { ++ bit = (addr>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ // send 32 bits data (MSB first, LSB last) ++ for(i=SPI_DAT_LEN-1;i>=0;i--) ++ { ++ bit = (value>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ ++ SPI_CS_enable(0); // CS low ++ ++} ++ ++ ++/************************************ ++* SPI_write_bit ++* bit_EEDO -> 1 or 0 to be written ++************************************/ ++void SPI_write_bit(char bit_EEDO) ++{ ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR); ++ value = readl(addr) |GPIO_EECK |GPIO_MOSI ; /* set EECK/MISO Pin to output */ ++ writel(value,addr); ++ if(bit_EEDO) ++ { ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET); ++ writel(GPIO_MOSI,addr); /* set MISO to 1 */ ++ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(GPIO_MOSI,addr); /* set MISO to 0 */ ++ } ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); /* set EECK to 1 */ ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); /* set EECK to 0 */ ++ ++ //return ; ++} ++ ++/********************************************************************** ++* read a bit from ADM6996 register ++***********************************************************************/ ++unsigned int SPI_read_bit(void) // read data from ++{ ++ unsigned int addr; ++ unsigned int value; ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR); ++ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input ++ writel(value,addr); ++ ++ addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); // set EECK to 1 ++ ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN); ++ value = readl(addr) ; ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); // set EECK to 0 ++ ++ ++ value = value >> 30; ++ return value ; ++} ++ ++/****************************************** ++* SPI_default ++* EEPROM content default value ++*******************************************/ ++int SPI_default(void) ++{ ++ int i; ++ unsigned reg_val,cmd; ++ ++#if 0 ++ SPI_write(7,0,0x1C,0x01); // map code space to 0 ++ ++ reg_val = SPI_read(7,0,0x10); ++ reg_val |= 0x0146; ++ reg_val &= ~0x0001; ++ SPI_write(7,0,0x10,reg_val); // reset iCPU and enable ext_access ++ SPI_write(7,0,0x11,0x0000); // start address ++ for(i=0;i<sizeof(vts_img);i++){ ++ SPI_write(7,0,0x12,vts_img[i]); // fill in ROM data ++ } ++ reg_val |= BIT(0)|BIT(3); ++ SPI_write(7,0,0x10,reg_val); // release iCPU ++ SPI_write(7,0,0x10,SPI_read(7,0,0x10)&~BIT(7)); // release iCPU ++ return ; ++#endif ++ ++ ++ for(i=0;i<15;i++){ ++ if(i!=6 && i!=7) ++ SPI_write(3,2,0,0x1010400+i); // Initial memory ++ mdelay(1); ++ } ++ ++ mdelay(30); ++ ++ SPI_write(2,0,0xB0,0x05); // Clear MAC table ++ SPI_write(2,0,0xD0,0x03); // Clear VLAN ++ ++ //for(i=0;i<5;i++) ++ SPI_write(1,6,0x19,0x2C); // Double Data rate ++ ++ for(i=0;i<4;i++){ ++ SPI_write(1,i,0x00,0x30050472); // MAC configure ++ SPI_write(1,i,0x00,0x10050442); // MAC configure ++ SPI_write(1,i,0x10,0x5F4); // Max length ++ SPI_write(1,i,0x04,0x00030000); // Flow control ++ SPI_write(1,i,0xDF,0x00000001); // Flow control ++ SPI_write(1,i,0x08,0x000050c2); // Flow control mac high ++ SPI_write(1,i,0x0C,0x002b00f1); // Flow control mac low ++ SPI_write(1,i,0x6E,BIT(3)); // forward pause frame ++ } ++ SPI_write(1,i,0x00,0x20000030); // set port 4 as reset ++ ++ SPI_write(1,6,0x00,0x300701B1); // MAC configure ++ SPI_write(1,6,0x00,0x10070181); // MAC configure ++ SPI_write(1,6,0x10,0x5F4); // Max length ++ SPI_write(1,6,0x04,0x00030000); // Flow control ++ SPI_write(1,6,0xDF,0x00000002); // Flow control ++ SPI_write(1,6,0x08,0x000050c2); // Flow control mac high ++ SPI_write(1,6,0x0C,0x002b00f1); // Flow control mac low ++ SPI_write(1,6,0x6E,BIT(3)); // forward pause frame ++ ++ ++ //SPI_write(7,0,0x05,0x31); // MII delay for loader ++ //SPI_write(7,0,0x05,0x01); // MII delay for kernel ++ SPI_write(7,0,0x05,0x33); ++ ++ SPI_write(2,0,0x10,0x4F); // Receive mask ++ ++ mdelay(50); ++ ++ SPI_write(7,0,0x14,0x02); // Release Reset ++ ++ mdelay(3); ++ ++ for(i=0;i<4;i++){ ++ init_seq_7385(i); ++ phy_receiver_init(i); ++ cmd = BIT(26)|(i<<21)|(0x1B<<16); // Config LED ++ SPI_write(3,0,1,cmd); ++ mdelay(10); ++ reg_val = SPI_read(3,0,2); ++ reg_val &= 0xFF00; ++ reg_val |= 0x61; ++ cmd = (i<<21)|(0x1B<<16)|reg_val; ++ SPI_write(3,0,1,cmd); ++ ++ cmd = BIT(26)|(i<<21)|(0x04<<16); // Pause enable ++ SPI_write(3,0,1,cmd); ++ mdelay(10); ++ reg_val = SPI_read(3,0,2); ++ reg_val |= BIT(10)|BIT(11); ++ cmd = (i<<21)|(0x04<<16)|reg_val; ++ SPI_write(3,0,1,cmd); ++ ++ cmd = BIT(26)|(i<<21)|(0x0<<16); // collision test and re-negotiation ++ SPI_write(3,0,1,cmd); ++ mdelay(10); ++ reg_val = SPI_read(3,0,2); ++ reg_val |= BIT(7)|BIT(8)|BIT(9); ++ cmd = (i<<21)|(0x0<<16)|reg_val; ++ SPI_write(3,0,1,cmd); ++ } ++ init_seq_7385(i); ++ writel(0x5787a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For switch timing ++ return 4; // return port_no ++} ++EXPORT_SYMBOL(SPI_default); ++ ++/*********************************************************** ++* SPI_CS_enable ++* before access ,you have to enable Chip Select. (pull high) ++* When fisish, you should pull low !! ++*************************************************************/ ++void SPI_CS_enable(unsigned char enable) ++{ ++ ++ unsigned int addr,value; ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR); ++ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */ ++ writel(value,addr); ++ ++ if(enable) ++ { ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(GPIO_EECK,addr); /* set EECK to 0 */ // pull low clk first ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(GPIO_EECS,addr); /* set EECS to 0 */ ++ ++ } ++ else ++ { ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET); ++ writel(GPIO_EECK,addr); /* set EECK to 1 */ // pull high clk before disable ++ writel(GPIO_EECS,addr); /* set EECS to 1 */ ++ } ++} ++ ++ ++/************************************************ ++* SPI_read ++* table -> which table to be read: 1/count 0/EEPROM ++* addr -> Address to be read ++* return : Value of the register ++*************************************************/ ++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr) ++{ ++ int i; ++ char bit; ++ unsigned int data,value=0; ++ ++ SPI_CS_enable(1); ++ ++ data = (block<<5) | subblock; ++ ++ //send write command ++ for(i=SPI_OP_LEN-1;i>=0;i--) ++ { ++ bit = (data>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ ++ // send 8 bits address (MSB first, LSB last) ++ for(i=SPI_ADD_LEN-1;i>=0;i--) ++ { ++ bit = (addr>>i)& 0x01; ++ SPI_write_bit(bit); ++ } ++ ++ // dummy read for chip ready ++ for(i=0;i<8;i++) ++ SPI_read_bit(); ++ ++ ++ // read 32 bits data (MSB first, LSB last) ++ for(i=SPI_DAT_LEN-1;i>=0;i--) ++ { ++ bit = SPI_read_bit(); ++ value |= bit<<i; ++ } ++ ++ SPI_CS_enable(0); // CS low ++ return(value); ++ ++} ++ ++void pull_low_gpio(unsigned int val) ++{ ++ ++ unsigned int addr,value; ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR); ++ writel(val,addr); /* set pin low to save power*/ ++ ++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR); ++ value = readl(addr) & ~ val; /* set Pin to input */ ++ writel(value,addr); ++ ++// value = readl(GMAC_GLOBAL_BASE_ADDR+0x0C); // reset GPIO1 module(self clear) ++// value |= BIT(21); ++// writel(value,GMAC_GLOBAL_BASE_ADDR+0x0C); ++} ++ ++unsigned int SPI_get_identifier(void) ++{ ++ unsigned int flag=0; ++ ++ SPI_write(7,0,0x01,0x01); ++ flag = SPI_read(7,0,0x18); // chip id ++ if((flag & 0x0ffff000)==0x07385000){ ++ printk("Get VSC-switch ID 0x%08x\n",flag); ++ //Giga_switch = 1;; ++ return 1; ++ } ++ else{ ++ printk("VSC-switch not found\n"); ++ //Giga_switch = 0; ++ pull_low_gpio(GPIO_EECK|GPIO_MOSI|GPIO_MISO|GPIO_EECS); // reduce power consume ++ return 0; ++ } ++} ++EXPORT_SYMBOL(SPI_get_identifier); ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,2223 @@ ++/**************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl351x_gmac.h ++* Description : ++* Define for device driver of Storlink SL351x network Engine ++* ++* Historych ++* ++* Date Writer Description ++* ----------- ----------- ------------------------------------------------- ++* 08/22/2005 Gary Chen Create and implement ++* ++****************************************************************************/ ++#ifndef _GMAC_SL351x_H ++#define _GMAC_SL351x_H ++#include <linux/skbuff.h> ++ ++#define SL351x_GMAC_WORKAROUND 1 ++ ++#undef BIG_ENDIAN ++#define BIG_ENDIAN 0 ++#define GMAC_DEBUG 1 ++#define GMAC_NUM 2 ++//#define L2_jumbo_frame 1 ++ ++#define _PACKED_ __attribute__ ((aligned(1), packed)) ++ ++#ifndef BIT ++#define BIT(x) (1 << (x)) ++#endif ++ ++#define REG32(addr) (*(volatile unsigned long * const)(addr)) ++ ++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) ++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) ++ ++// Define frame size ++#define ETHER_ADDR_LEN 6 ++#define GMAC_MAX_ETH_FRAME_SIZE 1514 ++#define GMAC_TX_BUF_SIZE ((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31)) ++#define MAX_ISR_WORK 20 ++ ++#ifdef L2_jumbo_frame ++#define SW_RX_BUF_SIZE 9234 // 2048 ,9234 ++#else ++#define SW_RX_BUF_SIZE 1536 // 2048 ++#endif ++ ++#define HW_RX_BUF_SIZE 1536 // 2048 ++ ++#define GMAC_DEV_TX_TIMEOUT (10*HZ) //add by CH ++#define SKB_RESERVE_BYTES 16 ++ ++/********************************************************************** ++ * Base Register ++ **********************************************************************/ ++#define TOE_BASE (IO_ADDRESS(SL2312_TOE_BASE)) ++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++#define TOE_GLOBAL_BASE (TOE_BASE + 0x0000) ++#define TOE_NONTOE_QUE_HDR_BASE (TOE_BASE + 0x2000) ++#define TOE_TOE_QUE_HDR_BASE (TOE_BASE + 0x3000) ++#define TOE_V_BIT_BASE (TOE_BASE + 0x4000) ++#define TOE_A_BIT_BASE (TOE_BASE + 0x6000) ++#define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000) ++#define TOE_GMAC0_BASE (TOE_BASE + 0xA000) ++#define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000) ++#define TOE_GMAC1_BASE (TOE_BASE + 0xE000) ++ ++/********************************************************************** ++ * Queue ID ++ **********************************************************************/ ++#define TOE_SW_FREE_QID 0x00 ++#define TOE_HW_FREE_QID 0x01 ++#define TOE_GMAC0_SW_TXQ0_QID 0x02 ++#define TOE_GMAC0_SW_TXQ1_QID 0x03 ++#define TOE_GMAC0_SW_TXQ2_QID 0x04 ++#define TOE_GMAC0_SW_TXQ3_QID 0x05 ++#define TOE_GMAC0_SW_TXQ4_QID 0x06 ++#define TOE_GMAC0_SW_TXQ5_QID 0x07 ++#define TOE_GMAC0_HW_TXQ0_QID 0x08 ++#define TOE_GMAC0_HW_TXQ1_QID 0x09 ++#define TOE_GMAC0_HW_TXQ2_QID 0x0A ++#define TOE_GMAC0_HW_TXQ3_QID 0x0B ++#define TOE_GMAC1_SW_TXQ0_QID 0x12 ++#define TOE_GMAC1_SW_TXQ1_QID 0x13 ++#define TOE_GMAC1_SW_TXQ2_QID 0x14 ++#define TOE_GMAC1_SW_TXQ3_QID 0x15 ++#define TOE_GMAC1_SW_TXQ4_QID 0x16 ++#define TOE_GMAC1_SW_TXQ5_QID 0x17 ++#define TOE_GMAC1_HW_TXQ0_QID 0x18 ++#define TOE_GMAC1_HW_TXQ1_QID 0x19 ++#define TOE_GMAC1_HW_TXQ2_QID 0x1A ++#define TOE_GMAC1_HW_TXQ3_QID 0x1B ++#define TOE_GMAC0_DEFAULT_QID 0x20 ++#define TOE_GMAC1_DEFAULT_QID 0x21 ++#define TOE_CLASSIFICATION_QID(x) (0x22 + x) // 0x22 ~ 0x2F ++#define TOE_TOE_QID(x) (0x40 + x) // 0x40 ~ 0x7F ++ ++/********************************************************************** ++ * TOE DMA Queue Number should be 2^n, n = 6...12 ++ * TOE DMA Queues are the following queue types: ++ * SW Free Queue, HW Free Queue, ++ * GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5 ++ * They have same descriptor numbers. ++ * The base address and descriptor number are configured at ++ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004) ++ **********************************************************************/ ++#define TOE_SW_FREEQ_DESC_POWER 10 ++#define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER) ++#define TOE_HW_FREEQ_DESC_POWER 8 ++#define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER) ++#define TOE_GMAC0_SWTXQ_DESC_POWER 8 ++#define TOE_GMAC0_SWTXQ_DESC_NUM (1<<TOE_GMAC0_SWTXQ_DESC_POWER) ++#define TOE_GMAC0_HWTXQ_DESC_POWER 8 ++#define TOE_GMAC0_HWTXQ_DESC_NUM (1<<TOE_GMAC0_HWTXQ_DESC_POWER) ++#define TOE_GMAC1_SWTXQ_DESC_POWER 8 ++#define TOE_GMAC1_SWTXQ_DESC_NUM (1<<TOE_GMAC1_SWTXQ_DESC_POWER) ++#define TOE_GMAC1_HWTXQ_DESC_POWER 8 ++#define TOE_GMAC1_HWTXQ_DESC_NUM (1<<TOE_GMAC1_HWTXQ_DESC_POWER) ++#define TOE_DEFAULT_Q0_DESC_POWER 8 ++#define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER) ++#define TOE_DEFAULT_Q1_DESC_POWER 8 ++#define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER) ++#define TOE_TOE_DESC_POWER 8 ++#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER) ++#define TOE_CLASS_DESC_POWER 8 ++#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER) ++#define TOE_INTR_DESC_POWER 8 ++#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER) ++ ++#define TOE_TOE_QUEUE_MAX 64 ++#define TOE_TOE_QUEUE_NUM 64 ++#define TOE_CLASS_QUEUE_MAX 14 ++#define TOE_CLASS_QUEUE_NUM 14 ++#define TOE_INTR_QUEUE_MAX 4 ++#define TOE_INTR_QUEUE_NUM 4 ++#define TOE_SW_TXQ_MAX 6 ++#define TOE_SW_TXQ_NUM 1 ++#define TOE_HW_TXQ_MAX 4 ++#define TOE_HW_TXQ_NUM 4 ++#define _max(x,y) ((x>y) ? x :y) ++#define TX_DESC_NUM _max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM) ++ ++#define RWPTR_ADVANCE_ONE(x, max) ((x == (max -1)) ? 0 : x+1) ++#define RWPTR_RECEDE_ONE(x, max) ((x == 0) ? (max -1) : x-1) ++#define SET_WPTR(addr, data) (*(volatile u16 * const)((u32)(addr)+2) = (u16)data) ++#define SET_RPTR(addr, data) (*(volatile u16 * const)((u32)(addr)) = (u16)data) ++ ++/********************************************************************** ++ * Global registers ++ * #define TOE_GLOBAL_BASE (TOE_BASE + 0x0000) ++ * Base 0x60000000 ++ **********************************************************************/ ++#define GLOBAL_TOE_VERSION_REG 0x0000 ++#define GLOBAL_SW_FREEQ_BASE_SIZE_REG 0x0004 ++#define GLOBAL_HW_FREEQ_BASE_SIZE_REG 0x0008 ++#define GLOBAL_DMA_SKB_SIZE_REG 0x0010 ++#define GLOBAL_SWFQ_RWPTR_REG 0x0014 ++#define GLOBAL_HWFQ_RWPTR_REG 0x0018 ++#define GLOBAL_INTERRUPT_STATUS_0_REG 0x0020 ++#define GLOBAL_INTERRUPT_ENABLE_0_REG 0x0024 ++#define GLOBAL_INTERRUPT_SELECT_0_REG 0x0028 ++#define GLOBAL_INTERRUPT_STATUS_1_REG 0x0030 ++#define GLOBAL_INTERRUPT_ENABLE_1_REG 0x0034 ++#define GLOBAL_INTERRUPT_SELECT_1_REG 0x0038 ++#define GLOBAL_INTERRUPT_STATUS_2_REG 0x0040 ++#define GLOBAL_INTERRUPT_ENABLE_2_REG 0x0044 ++#define GLOBAL_INTERRUPT_SELECT_2_REG 0x0048 ++#define GLOBAL_INTERRUPT_STATUS_3_REG 0x0050 ++#define GLOBAL_INTERRUPT_ENABLE_3_REG 0x0054 ++#define GLOBAL_INTERRUPT_SELECT_3_REG 0x0058 ++#define GLOBAL_INTERRUPT_STATUS_4_REG 0x0060 ++#define GLOBAL_INTERRUPT_ENABLE_4_REG 0x0064 ++#define GLOBAL_INTERRUPT_SELECT_4_REG 0x0068 ++#define GLOBAL_HASH_TABLE_BASE_REG 0x006C ++#define GLOBAL_QUEUE_THRESHOLD_REG 0x0070 ++ ++/********************************************************************** ++ * GMAC 0/1 DMA/TOE register ++ * #define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000) ++ * #define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000) ++ * Base 0x60008000 or 0x6000C000 ++ **********************************************************************/ ++#define GMAC_DMA_CTRL_REG 0x0000 ++#define GMAC_TX_WEIGHTING_CTRL_0_REG 0x0004 ++#define GMAC_TX_WEIGHTING_CTRL_1_REG 0x0008 ++#define GMAC_SW_TX_QUEUE0_PTR_REG 0x000C ++#define GMAC_SW_TX_QUEUE1_PTR_REG 0x0010 ++#define GMAC_SW_TX_QUEUE2_PTR_REG 0x0014 ++#define GMAC_SW_TX_QUEUE3_PTR_REG 0x0018 ++#define GMAC_SW_TX_QUEUE4_PTR_REG 0x001C ++#define GMAC_SW_TX_QUEUE5_PTR_REG 0x0020 ++#define GMAC_HW_TX_QUEUE0_PTR_REG 0x0024 ++#define GMAC_HW_TX_QUEUE1_PTR_REG 0x0028 ++#define GMAC_HW_TX_QUEUE2_PTR_REG 0x002C ++#define GMAC_HW_TX_QUEUE3_PTR_REG 0x0030 ++#define GMAC_DMA_TX_FIRST_DESC_REG 0x0038 ++#define GMAC_DMA_TX_CURR_DESC_REG 0x003C ++#define GMAC_DMA_TX_DESC_WORD0_REG 0x0040 ++#define GMAC_DMA_TX_DESC_WORD1_REG 0x0044 ++#define GMAC_DMA_TX_DESC_WORD2_REG 0x0048 ++#define GMAC_DMA_TX_DESC_WORD3_REG 0x004C ++#define GMAC_SW_TX_QUEUE_BASE_REG 0x0050 ++#define GMAC_HW_TX_QUEUE_BASE_REG 0x0054 ++#define GMAC_DMA_RX_FIRST_DESC_REG 0x0058 ++#define GMAC_DMA_RX_CURR_DESC_REG 0x005C ++#define GMAC_DMA_RX_DESC_WORD0_REG 0x0060 ++#define GMAC_DMA_RX_DESC_WORD1_REG 0x0064 ++#define GMAC_DMA_RX_DESC_WORD2_REG 0x0068 ++#define GMAC_DMA_RX_DESC_WORD3_REG 0x006C ++#define GMAC_HASH_ENGINE_REG0 0x0070 ++#define GMAC_HASH_ENGINE_REG1 0x0074 ++#define GMAC_MR0CR0 0x0078 // matching rule 0 Control register 0 ++#define GMAC_MR0CR1 0x007C // matching rule 0 Control register 1 ++#define GMAC_MR0CR2 0x0080 // matching rule 0 Control register 2 ++#define GMAC_MR1CR0 0x0084 // matching rule 1 Control register 0 ++#define GMAC_MR1CR1 0x0088 // matching rule 1 Control register 1 ++#define GMAC_MR1CR2 0x008C // matching rule 1 Control register 2 ++#define GMAC_MR2CR0 0x0090 // matching rule 2 Control register 0 ++#define GMAC_MR2CR1 0x0094 // matching rule 2 Control register 1 ++#define GMAC_MR2CR2 0x0098 // matching rule 2 Control register 2 ++#define GMAC_MR3CR0 0x009C // matching rule 3 Control register 0 ++#define GMAC_MR3CR1 0x00A0 // matching rule 3 Control register 1 ++#define GMAC_MR3CR2 0x00A4 // matching rule 3 Control register 2 ++#define GMAC_SPR0 0x00A8 // Support Protocol Regsister 0 ++#define GMAC_SPR1 0x00AC // Support Protocol Regsister 1 ++#define GMAC_SPR2 0x00B0 // Support Protocol Regsister 2 ++#define GMAC_SPR3 0x00B4 // Support Protocol Regsister 3 ++#define GMAC_SPR4 0x00B8 // Support Protocol Regsister 4 ++#define GMAC_SPR5 0x00BC // Support Protocol Regsister 5 ++#define GMAC_SPR6 0x00C0 // Support Protocol Regsister 6 ++#define GMAC_SPR7 0x00C4 // Support Protocol Regsister 7 ++#define GMAC_AHB_WEIGHT_REG 0x00C8 // GMAC Hash/Rx/Tx AHB Weighting register ++ ++/********************************************************************** ++ * TOE GMAC 0/1 register ++ * #define TOE_GMAC0_BASE (TOE_BASE + 0xA000) ++ * #define TOE_GMAC1_BASE (TOE_BASE + 0xE000) ++ * Base 0x6000A000 or 0x6000E000 ++ **********************************************************************/ ++enum GMAC_REGISTER { ++ GMAC_STA_ADD0 = 0x0000, ++ GMAC_STA_ADD1 = 0x0004, ++ GMAC_STA_ADD2 = 0x0008, ++ GMAC_RX_FLTR = 0x000c, ++ GMAC_MCAST_FIL0 = 0x0010, ++ GMAC_MCAST_FIL1 = 0x0014, ++ GMAC_CONFIG0 = 0x0018, ++ GMAC_CONFIG1 = 0x001c, ++ GMAC_CONFIG2 = 0x0020, ++ GMAC_CONFIG3 = 0x0024, ++ GMAC_RESERVED = 0x0028, ++ GMAC_STATUS = 0x002c, ++ GMAC_IN_DISCARDS= 0x0030, ++ GMAC_IN_ERRORS = 0x0034, ++ GMAC_IN_MCAST = 0x0038, ++ GMAC_IN_BCAST = 0x003c, ++ GMAC_IN_MAC1 = 0x0040, // for STA 1 MAC Address ++ GMAC_IN_MAC2 = 0x0044 // for STA 2 MAC Address ++}; ++/********************************************************************** ++ * TOE version Register (offset 0x0000) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int reserved : 15; // bit 31:17 ++ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry ++ unsigned int device_id : 12; // bit 15:4 Device ID ++ unsigned int revision_id : 4; // bit 3:0 Revision ID ++#else ++ unsigned int revision_id : 4; // bit 3:0 Revision ID ++ unsigned int device_id : 12; // bit 15:4 Device ID ++ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry ++ unsigned int reserved : 15; // bit 31:17 ++#endif ++ } bits; ++} TOE_VERSION_T; ++ ++ ++/********************************************************************** ++ * DMA Queues description Ring Base Address/Size Register (offset 0x0004) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int base_size; ++} DMA_Q_BASE_SIZE_T; ++#define DMA_Q_BASE_MASK (~0x0f) ++ ++/********************************************************************** ++ * DMA SKB Buffer register (offset 0x0008) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0008 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size ++ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size ++#else ++ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size ++ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size ++#endif ++ } bits; ++} DMA_SKB_SIZE_T; ++ ++/********************************************************************** ++ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_000c ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW ++ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO ++#else ++ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO ++ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW ++#endif ++ } bits; ++} DMA_RWPTR_T; ++ ++/********************************************************************** ++ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010) ++ **********************************************************************/ ++// see DMA_RWPTR_T structure ++ ++/********************************************************************** ++ * Interrupt Status Register 0 (offset 0x0020) ++ * Interrupt Mask Register 0 (offset 0x0024) ++ * Interrupt Select Register 0 (offset 0x0028) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0020 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx ++ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error ++ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx ++ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error ++ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx ++ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error ++ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx ++ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error ++ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt ++ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt ++ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt ++ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt ++ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt ++ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt ++ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt ++ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt ++ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt ++ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt ++ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt ++ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt ++ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt ++ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt ++ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt ++ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt ++ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt ++ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt ++ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt ++ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt ++ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt ++ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt ++ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt ++ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt ++#else ++ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt ++ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt ++ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt ++ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt ++ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt ++ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt ++ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt ++ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt ++ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt ++ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt ++ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt ++ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt ++ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt ++ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt ++ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt ++ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt ++ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt ++ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt ++ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt ++ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt ++ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt ++ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt ++ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt ++ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt ++ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error ++ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx ++ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error ++ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx ++ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error ++ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx ++ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error ++ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx ++#endif ++ } bits; ++} INTR_REG0_T; ++ ++#define GMAC1_TXDERR_INT_BIT BIT(31) ++#define GMAC1_TXPERR_INT_BIT BIT(30) ++#define GMAC0_TXDERR_INT_BIT BIT(29) ++#define GMAC0_TXPERR_INT_BIT BIT(28) ++#define GMAC1_RXDERR_INT_BIT BIT(27) ++#define GMAC1_RXPERR_INT_BIT BIT(26) ++#define GMAC0_RXDERR_INT_BIT BIT(25) ++#define GMAC0_RXPERR_INT_BIT BIT(24) ++#define GMAC1_SWTQ15_FIN_INT_BIT BIT(23) ++#define GMAC1_SWTQ14_FIN_INT_BIT BIT(22) ++#define GMAC1_SWTQ13_FIN_INT_BIT BIT(21) ++#define GMAC1_SWTQ12_FIN_INT_BIT BIT(20) ++#define GMAC1_SWTQ11_FIN_INT_BIT BIT(19) ++#define GMAC1_SWTQ10_FIN_INT_BIT BIT(18) ++#define GMAC0_SWTQ05_FIN_INT_BIT BIT(17) ++#define GMAC0_SWTQ04_FIN_INT_BIT BIT(16) ++#define GMAC0_SWTQ03_FIN_INT_BIT BIT(15) ++#define GMAC0_SWTQ02_FIN_INT_BIT BIT(14) ++#define GMAC0_SWTQ01_FIN_INT_BIT BIT(13) ++#define GMAC0_SWTQ00_FIN_INT_BIT BIT(12) ++#define GMAC1_SWTQ15_EOF_INT_BIT BIT(11) ++#define GMAC1_SWTQ14_EOF_INT_BIT BIT(10) ++#define GMAC1_SWTQ13_EOF_INT_BIT BIT(9) ++#define GMAC1_SWTQ12_EOF_INT_BIT BIT(8) ++#define GMAC1_SWTQ11_EOF_INT_BIT BIT(7) ++#define GMAC1_SWTQ10_EOF_INT_BIT BIT(6) ++#define GMAC0_SWTQ05_EOF_INT_BIT BIT(5) ++#define GMAC0_SWTQ04_EOF_INT_BIT BIT(4) ++#define GMAC0_SWTQ03_EOF_INT_BIT BIT(3) ++#define GMAC0_SWTQ02_EOF_INT_BIT BIT(2) ++#define GMAC0_SWTQ01_EOF_INT_BIT BIT(1) ++#define GMAC0_SWTQ00_EOF_INT_BIT BIT(0) ++ ++ ++/********************************************************************** ++ * Interrupt Status Register 1 (offset 0x0030) ++ * Interrupt Mask Register 1 (offset 0x0034) ++ * Interrupt Select Register 1 (offset 0x0038) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0030 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt ++ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt ++ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt ++ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt ++ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts ++ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts ++ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts ++ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts ++ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt ++ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt ++ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt ++ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt ++ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt ++ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt ++ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt ++ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt ++ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt ++ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt ++ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt ++#else ++ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt ++ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt ++ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt ++ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt ++ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt ++ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt ++ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt ++ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt ++ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt ++ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt ++ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt ++ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts ++ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts ++ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts ++ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts ++ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt ++ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt ++ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt ++ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt ++#endif ++ } bits; ++} INTR_REG1_T; ++ ++#define TOE_IQ3_FULL_INT_BIT BIT(31) ++#define TOE_IQ2_FULL_INT_BIT BIT(30) ++#define TOE_IQ1_FULL_INT_BIT BIT(29) ++#define TOE_IQ0_FULL_INT_BIT BIT(28) ++#define TOE_IQ3_INT_BIT BIT(27) ++#define TOE_IQ2_INT_BIT BIT(26) ++#define TOE_IQ1_INT_BIT BIT(25) ++#define TOE_IQ0_INT_BIT BIT(24) ++#define GMAC1_HWTQ13_EOF_INT_BIT BIT(23) ++#define GMAC1_HWTQ12_EOF_INT_BIT BIT(22) ++#define GMAC1_HWTQ11_EOF_INT_BIT BIT(21) ++#define GMAC1_HWTQ10_EOF_INT_BIT BIT(20) ++#define GMAC0_HWTQ03_EOF_INT_BIT BIT(19) ++#define GMAC0_HWTQ02_EOF_INT_BIT BIT(18) ++#define GMAC0_HWTQ01_EOF_INT_BIT BIT(17) ++#define GMAC0_HWTQ00_EOF_INT_BIT BIT(16) ++#define CLASS_RX_INT_BIT(x) BIT((x+2)) ++#define DEFAULT_Q1_INT_BIT BIT(1) ++#define DEFAULT_Q0_INT_BIT BIT(0) ++ ++#define TOE_IQ_INT_BITS (TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \ ++ TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT) ++#define TOE_IQ_FULL_BITS (TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \ ++ TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT) ++#define TOE_IQ_ALL_BITS (TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS) ++#define TOE_CLASS_RX_INT_BITS 0xfffc ++ ++/********************************************************************** ++ * Interrupt Status Register 2 (offset 0x0040) ++ * Interrupt Mask Register 2 (offset 0x0044) ++ * Interrupt Select Register 2 (offset 0x0048) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0040 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt ++ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt ++ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt ++ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt ++ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt ++ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt ++ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt ++ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt ++ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt ++ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt ++ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt ++ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt ++ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt ++ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt ++ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt ++ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt ++ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt ++ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt ++ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt ++ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt ++ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt ++ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt ++ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt ++ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt ++ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt ++ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt ++ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt ++ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt ++ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt ++ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt ++ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt ++ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt ++#else ++ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt ++ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt ++ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt ++ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt ++ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt ++ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt ++ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt ++ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt ++ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt ++ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt ++ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt ++ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt ++ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt ++ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt ++ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt ++ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt ++ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt ++ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt ++ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt ++ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt ++ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt ++ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt ++ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt ++ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt ++ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt ++ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt ++ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt ++ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt ++ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt ++ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt ++ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt ++ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt ++#endif ++ } bits; ++} INTR_REG2_T; ++ ++#define TOE_QL_FULL_INT_BIT(x) BIT(x) ++ ++/********************************************************************** ++ * Interrupt Status Register 3 (offset 0x0050) ++ * Interrupt Mask Register 3 (offset 0x0054) ++ * Interrupt Select Register 3 (offset 0x0058) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0050 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt ++ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt ++ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt ++ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt ++ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt ++ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt ++ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt ++ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt ++ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt ++ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt ++ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt ++ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt ++ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt ++ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt ++ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt ++ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt ++ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt ++ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt ++ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt ++ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt ++ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt ++ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt ++ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt ++ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt ++ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt ++ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt ++ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt ++ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt ++ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt ++ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt ++ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt ++ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt ++#else ++ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt ++ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt ++ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt ++ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt ++ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt ++ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt ++ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt ++ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt ++ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt ++ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt ++ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt ++ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt ++ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt ++ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt ++ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt ++ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt ++ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt ++ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt ++ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt ++ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt ++ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt ++ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt ++ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt ++ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt ++ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt ++ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt ++ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt ++ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt ++ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt ++ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt ++ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt ++ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt ++#endif ++ } bits; ++} INTR_REG3_T; ++ ++#define TOE_QH_FULL_INT_BIT(x) BIT(x-32) ++ ++/********************************************************************** ++ * Interrupt Status Register 4 (offset 0x0060) ++ * Interrupt Mask Register 4 (offset 0x0064) ++ * Interrupt Select Register 4 (offset 0x0068) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned char byte; ++ struct bit_0060 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned char reserved : 1; // ++ unsigned char cnt_full : 1; // MIB counters half full interrupt ++ unsigned char rx_pause_on : 1; // received pause on frame interrupt ++ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt ++ unsigned char rx_pause_off : 1; // received pause off frame interrupt ++ unsigned char tx_pause_off : 1; // received pause off frame interrupt ++ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt ++ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode ++#else ++ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode ++ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt ++ unsigned char tx_pause_off : 1; // received pause off frame interrupt ++ unsigned char rx_pause_off : 1; // received pause off frame interrupt ++ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt ++ unsigned char rx_pause_on : 1; // received pause on frame interrupt ++ unsigned char cnt_full : 1; // MIB counters half full interrupt ++ unsigned char reserved : 1; // ++#endif ++ } _PACKED_ bits; ++} _PACKED_ GMAC_INTR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0060_2 ++ { ++#if (BIG_ENDIAN==1) ++ GMAC_INTR_T gmac1; ++ GMAC_INTR_T gmac0; ++ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr. ++ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr. ++ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr. ++#else ++#endif ++ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr. ++ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr. ++ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr. ++ GMAC_INTR_T gmac0; ++ GMAC_INTR_T gmac1; ++ } bits; ++} INTR_REG4_T; ++ ++#define GMAC1_RESERVED_INT_BIT BIT(31) ++#define GMAC1_MIB_INT_BIT BIT(30) ++#define GMAC1_RX_PAUSE_ON_INT_BIT BIT(29) ++#define GMAC1_TX_PAUSE_ON_INT_BIT BIT(28) ++#define GMAC1_RX_PAUSE_OFF_INT_BIT BIT(27) ++#define GMAC1_TX_PAUSE_OFF_INT_BIT BIT(26) ++#define GMAC1_RX_OVERRUN_INT_BIT BIT(25) ++#define GMAC1_STATUS_CHANGE_INT_BIT BIT(24) ++#define GMAC0_RESERVED_INT_BIT BIT(23) ++#define GMAC0_MIB_INT_BIT BIT(22) ++#define GMAC0_RX_PAUSE_ON_INT_BIT BIT(21) ++#define GMAC0_TX_PAUSE_ON_INT_BIT BIT(20) ++#define GMAC0_RX_PAUSE_OFF_INT_BIT BIT(19) ++#define GMAC0_TX_PAUSE_OFF_INT_BIT BIT(18) ++#define GMAC0_RX_OVERRUN_INT_BIT BIT(17) ++#define GMAC0_STATUS_CHANGE_INT_BIT BIT(16) ++#define CLASS_RX_FULL_INT_BIT(x) BIT((x+2)) ++#define HWFQ_EMPTY_INT_BIT BIT(1) ++#define SWFQ_EMPTY_INT_BIT BIT(0) ++ ++#if 1 ++#define GMAC0_INT_BITS (GMAC0_MIB_INT_BIT) ++#define GMAC1_INT_BITS (GMAC1_MIB_INT_BIT) ++#else ++#define GMAC0_INT_BITS (GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \ ++ GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT | \ ++ GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | \ ++ GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT) ++#define GMAC1_INT_BITS (GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \ ++ GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT | \ ++ GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | \ ++ GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT) ++#endif ++ ++#define CLASS_RX_FULL_INT_BITS 0xfffc ++ ++/********************************************************************** ++ * GLOBAL_QUEUE_THRESHOLD_REG (offset 0x0070) ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_0070_2 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int toe_class : 8; // 31:24 ++ unsigned int intrq : 8; // 23:16 ++ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold ++ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold ++#else ++#endif ++ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold ++ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold ++ unsigned int intrq : 8; // 23:16 ++ unsigned int toe_class : 8; // 31:24 ++ } bits; ++} QUEUE_THRESHOLD_T; ++ ++ ++/********************************************************************** ++ * GMAC DMA Control Register ++ * GMAC0 offset 0x8000 ++ * GMAC1 offset 0xC000 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable ++ unsigned int td_enable : 1; // bit 30 Tx DMA Enable ++ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA ++ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept ++ unsigned int reserved : 10; // bit 27:18 ++ unsigned int rd_insert_bytes : 2; // bit 17:16 ++ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control ++ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request ++ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width ++ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control ++ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request ++ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width ++#else ++ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width ++ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request ++ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control ++ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width ++ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request ++ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control ++ unsigned int rd_insert_bytes : 2; // bit 17:16 ++ unsigned int reserved : 10; // bit 27:18 ++ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept ++ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA ++ unsigned int td_enable : 1; // bit 30 Tx DMA Enable ++ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable ++#endif ++ } bits; ++} GMAC_DMA_CTRL_T; ++ ++/********************************************************************** ++ * GMAC Tx Weighting Control Register 0 ++ * GMAC0 offset 0x8004 ++ * GMAC1 offset 0xC004 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 8; // bit 31:24 ++ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0 ++ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1 ++ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2 ++ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3 ++#else ++ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3 ++ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2 ++ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1 ++ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0 ++ unsigned int reserved : 8; // bit 31:24 ++#endif ++ } bits; ++} GMAC_TX_WCR0_T; // Weighting Control Register 0 ++ ++/********************************************************************** ++ * GMAC Tx Weighting Control Register 1 ++ * GMAC0 offset 0x8008 ++ * GMAC1 offset 0xC008 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8008 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 2; // bit 31:30 ++ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5 ++ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4 ++ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3 ++ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2 ++ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1 ++ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0 ++#else ++ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0 ++ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1 ++ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2 ++ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3 ++ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4 ++ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5 ++ unsigned int reserved : 2; // bit 31:30 ++#endif ++ } bits; ++} GMAC_TX_WCR1_T; // Weighting Control Register 1 ++ ++/********************************************************************** ++ * Queue Read/Write Pointer ++ * GMAC SW TX Queue 0~5 Read/Write Pointer register ++ * GMAC0 offset 0x800C ~ 0x8020 ++ * GMAC1 offset 0xC00C ~ 0xC020 ++ * GMAC HW TX Queue 0~3 Read/Write Pointer register ++ * GMAC0 offset 0x8024 ~ 0x8030 ++ * GMAC1 offset 0xC024 ~ 0xC030 ++ **********************************************************************/ ++// see DMA_RWPTR_T structure ++ ++/********************************************************************** ++ * GMAC DMA Tx First Description Address Register ++ * GMAC0 offset 0x8038 ++ * GMAC1 offset 0xC038 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8038 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address ++ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle ++ unsigned int reserved : 3; ++#else ++ unsigned int reserved : 3; ++ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle ++ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address ++#endif ++ } bits; ++} GMAC_TXDMA_FIRST_DESC_T; ++ ++/********************************************************************** ++ * GMAC DMA Tx Current Description Address Register ++ * GMAC0 offset 0x803C ++ * GMAC1 offset 0xC03C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_803C ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address ++ unsigned int reserved : 4; ++#else ++ unsigned int reserved : 4; ++ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address ++#endif ++ } bits; ++} GMAC_TXDMA_CURR_DESC_T; ++ ++/********************************************************************** ++ * GMAC DMA Tx Description Word 0 Register ++ * GMAC0 offset 0x8040 ++ * GMAC1 offset 0xC040 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8040 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 1; // bit 31 ++ unsigned int derr : 1; // bit 30 data error during processing this descriptor ++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor ++ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits ++ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed ++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame ++ unsigned int buffer_size : 16; // bit 15:0 Transfer size ++#else ++ unsigned int buffer_size : 16; // bit 15:0 Transfer size ++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame ++ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed ++ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits ++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor ++ unsigned int derr : 1; // bit 30 data error during processing this descriptor ++ unsigned int reserved : 1; // bit 31 ++#endif ++ } bits; ++} GMAC_TXDESC_0_T; ++ ++/********************************************************************** ++ * GMAC DMA Tx Description Word 1 Register ++ * GMAC0 offset 0x8044 ++ * GMAC1 offset 0xC044 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct txdesc_word1 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved ++ unsigned int ip_fixed_len: 1; // bit 22 ++ unsigned int bypass_tss : 1; // bit 21 ++ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable ++ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable ++ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable ++ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable ++ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting ++ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count ++#else ++ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count ++ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting ++ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable ++ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable ++ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable ++ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable ++ unsigned int bypass_tss : 1; // bit 21 ++ unsigned int ip_fixed_len: 1; // bit 22 ++ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved ++#endif ++ } bits; ++} GMAC_TXDESC_1_T; ++ ++#define TSS_IP_FIXED_LEN_BIT BIT(22) ++#define TSS_UDP_CHKSUM_BIT BIT(20) ++#define TSS_TCP_CHKSUM_BIT BIT(19) ++#define TSS_IPV6_ENABLE_BIT BIT(18) ++#define TSS_IP_CHKSUM_BIT BIT(17) ++#define TSS_MTU_ENABLE_BIT BIT(16) ++ ++/********************************************************************** ++ * GMAC DMA Tx Description Word 2 Register ++ * GMAC0 offset 0x8048 ++ * GMAC1 offset 0xC048 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int buf_adr; ++} GMAC_TXDESC_2_T; ++ ++/********************************************************************** ++ * GMAC DMA Tx Description Word 3 Register ++ * GMAC0 offset 0x804C ++ * GMAC1 offset 0xC04C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct txdesc_word3 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking ++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable ++ unsigned int reserved : 18; // bit 28:11 ++ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count ++#else ++ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count ++ unsigned int reserved : 18; // bit 28:11 ++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable ++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking ++#endif ++ } bits; ++} GMAC_TXDESC_3_T; ++#define SOF_EOF_BIT_MASK 0x3fffffff ++#define SOF_BIT 0x80000000 ++#define EOF_BIT 0x40000000 ++#define EOFIE_BIT BIT(29) ++#define MTU_SIZE_BIT_MASK 0x7ff ++ ++/********************************************************************** ++ * GMAC Tx Descriptor ++ **********************************************************************/ ++typedef struct ++{ ++ GMAC_TXDESC_0_T word0; ++ GMAC_TXDESC_1_T word1; ++ GMAC_TXDESC_2_T word2; ++ GMAC_TXDESC_3_T word3; ++} GMAC_TXDESC_T; ++ ++ ++/********************************************************************** ++ * GMAC DMA Rx First Description Address Register ++ * GMAC0 offset 0x8058 ++ * GMAC1 offset 0xC058 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8058 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address ++ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle ++ unsigned int reserved : 3; // bit 2:0 ++#else ++ unsigned int reserved : 3; // bit 2:0 ++ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle ++ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address ++#endif ++ } bits; ++} GMAC_RXDMA_FIRST_DESC_T; ++ ++/********************************************************************** ++ * GMAC DMA Rx Current Description Address Register ++ * GMAC0 offset 0x805C ++ * GMAC1 offset 0xC05C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_805C ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address ++ unsigned int reserved : 4; // bit 3:0 ++#else ++ unsigned int reserved : 4; // bit 3:0 ++ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address ++#endif ++ } bits; ++} GMAC_RXDMA_CURR_DESC_T; ++ ++/********************************************************************** ++ * GMAC DMA Rx Description Word 0 Register ++ * GMAC0 offset 0x8060 ++ * GMAC1 offset 0xC060 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8060 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue ++ unsigned int derr : 1; // bit 30 data error during processing this descriptor ++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor ++ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status ++ unsigned int status : 4; // bit 24:22 Status of rx frame ++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame ++ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame ++#else ++ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame ++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame ++ unsigned int status : 4; // bit 24:22 Status of rx frame ++ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status ++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor ++ unsigned int derr : 1; // bit 30 data error during processing this descriptor ++ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue ++#endif ++ } bits; ++} GMAC_RXDESC_0_T; ++ ++#define GMAC_RXDESC_0_T_derr BIT(30) ++#define GMAC_RXDESC_0_T_perr BIT(29) ++#define GMAC_RXDESC_0_T_chksum_status(x) BIT((x+26)) ++#define GMAC_RXDESC_0_T_status(x) BIT((x+22)) ++#define GMAC_RXDESC_0_T_desc_count(x) BIT((x+16)) ++ ++#define RX_CHKSUM_IP_UDP_TCP_OK 0 ++#define RX_CHKSUM_IP_OK_ONLY 1 ++#define RX_CHKSUM_NONE 2 ++#define RX_CHKSUM_IP_ERR_UNKNOWN 4 ++#define RX_CHKSUM_IP_ERR 5 ++#define RX_CHKSUM_TCP_UDP_ERR 6 ++#define RX_CHKSUM_NUM 8 ++ ++#define RX_STATUS_GOOD_FRAME 0 ++#define RX_STATUS_TOO_LONG_GOOD_CRC 1 ++#define RX_STATUS_RUNT_FRAME 2 ++#define RX_STATUS_SFD_NOT_FOUND 3 ++#define RX_STATUS_CRC_ERROR 4 ++#define RX_STATUS_TOO_LONG_BAD_CRC 5 ++#define RX_STATUS_ALIGNMENT_ERROR 6 ++#define RX_STATUS_TOO_LONG_BAD_ALIGN 7 ++#define RX_STATUS_RX_ERR 8 ++#define RX_STATUS_DA_FILTERED 9 ++#define RX_STATUS_BUFFER_FULL 10 ++#define RX_STATUS_NUM 16 ++ ++ ++/********************************************************************** ++ * GMAC DMA Rx Description Word 1 Register ++ * GMAC0 offset 0x8064 ++ * GMAC1 offset 0xC064 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct rxdesc_word1 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sw_id : 16; // bit 31:16 Software ID ++ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count ++#else ++ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count ++ unsigned int sw_id : 16; // bit 31:16 Software ID ++#endif ++ } bits; ++} GMAC_RXDESC_1_T; ++ ++/********************************************************************** ++ * GMAC DMA Rx Description Word 2 Register ++ * GMAC0 offset 0x8068 ++ * GMAC1 offset 0xC068 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int buf_adr; ++} GMAC_RXDESC_2_T; ++ ++#define RX_INSERT_NONE 0 ++#define RX_INSERT_1_BYTE 1 ++#define RX_INSERT_2_BYTE 2 ++#define RX_INSERT_3_BYTE 3 ++ ++#define RX_INSERT_BYTES RX_INSERT_2_BYTE ++/********************************************************************** ++ * GMAC DMA Rx Description Word 3 Register ++ * GMAC0 offset 0x806C ++ * GMAC1 offset 0xC06C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct rxdesc_word3 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking ++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable ++ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present ++ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet ++ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header ++ unsigned int abnormal : 1; // bit 25 abnormal case found ++ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected ++ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset ++ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset ++ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset ++#else ++ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset ++ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset ++ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset ++ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected ++ unsigned int abnormal : 1; // bit 25 abnormal case found ++ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header ++ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet ++ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present ++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable ++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking ++#endif ++ } bits; ++} GMAC_RXDESC_3_T; ++ ++/********************************************************************** ++ * GMAC Rx Descriptor ++ **********************************************************************/ ++typedef struct ++{ ++ GMAC_RXDESC_0_T word0; ++ GMAC_RXDESC_1_T word1; ++ GMAC_RXDESC_2_T word2; ++ GMAC_RXDESC_3_T word3; ++} GMAC_RXDESC_T; ++ ++/********************************************************************** ++ * GMAC Hash Engine Enable/Action Register 0 Offset Register ++ * GMAC0 offset 0x8070 ++ * GMAC1 offset 0xC070 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8070 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1 ++ unsigned int reserved1 : 1; // bit 30 ++ unsigned int timing : 3; // bit 29:27 ++ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset ++ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size ++ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0 ++ unsigned int reserved0 : 4; // bit 14:11 ++ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset ++ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size ++#else ++ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size ++ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset ++ unsigned int reserved0 : 4; // bit 14:11 ++ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0 ++ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size ++ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset ++ unsigned int timing : 3; // bit 29:27 ++ unsigned int reserved1 : 1; // bit 30 ++ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1 ++#endif ++ } bits; ++} GMAC_HASH_ENABLE_REG0_T; ++ ++/********************************************************************** ++ * GMAC Hash Engine Enable/Action Register 1 Offset Register ++ * GMAC0 offset 0x8074 ++ * GMAC1 offset 0xC074 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8074 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3 ++ unsigned int reserved3 : 4; // bit 30:27 ++ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset ++ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size ++ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2 ++ unsigned int reserved2 : 4; // bit 14:11 ++ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset ++ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size ++#else ++ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size ++ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset ++ unsigned int reserved2 : 4; // bit 14:11 ++ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2 ++ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size ++ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset ++ unsigned int reserved1 : 4; // bit 30:27 ++ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3 ++#endif ++ } bits; ++} GMAC_HASH_ENABLE_REG1_T; ++ ++ ++/********************************************************************** ++ * GMAC Matching Rule Control Register 0 ++ * GMAC0 offset 0x8078 ++ * GMAC1 offset 0xC078 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_8078 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int l2 : 1; // bit 31 L2 matching enable ++ unsigned int l3 : 1; // bit 30 L3 matching enable ++ unsigned int l4 : 1; // bit 29 L4 matching enable ++ unsigned int l7 : 1; // bit 28 L7 matching enable ++ unsigned int port : 1; // bit 27 PORT ID matching enable ++ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched ++ unsigned int da : 1; // bit 23 MAC DA enable ++ unsigned int sa : 1; // bit 22 MAC SA enable ++ unsigned int ether_type : 1; // bit 21 Ethernet type enable ++ unsigned int vlan : 1; // bit 20 VLAN ID enable ++ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable ++ unsigned int reserved1 : 3; // bit 18:16 ++ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6 ++ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length ++ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label ++ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class ++ unsigned int reserved2 : 4; // bit 11:8 ++ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0 ++#else ++ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0 ++ unsigned int reserved2 : 4; // bit 11:8 ++ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class ++ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label ++ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length ++ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6 ++ unsigned int reserved1 : 3; // bit 18:16 ++ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable ++ unsigned int vlan : 1; // bit 20 VLAN ID enable ++ unsigned int ether_type : 1; // bit 21 Ethernet type enable ++ unsigned int sa : 1; // bit 22 MAC SA enable ++ unsigned int da : 1; // bit 23 MAC DA enable ++ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched ++ unsigned int port : 1; // bit 27 PORT ID matching enable ++ unsigned int l7 : 1; // bit 28 L7 matching enable ++ unsigned int l4 : 1; // bit 29 L4 matching enable ++ unsigned int l3 : 1; // bit 30 L3 matching enable ++ unsigned int l2 : 1; // bit 31 L2 matching enable ++#endif ++ } bits; ++} GMAC_MRxCR0_T; ++ ++#define MR_L2_BIT BIT(31) ++#define MR_L3_BIT BIT(30) ++#define MR_L4_BIT BIT(29) ++#define MR_L7_BIT BIT(28) ++#define MR_PORT_BIT BIT(27) ++#define MR_PRIORITY_BIT BIT(26) ++#define MR_DA_BIT BIT(23) ++#define MR_SA_BIT BIT(22) ++#define MR_ETHER_TYPE_BIT BIT(21) ++#define MR_VLAN_BIT BIT(20) ++#define MR_PPPOE_BIT BIT(19) ++#define MR_IP_VER_BIT BIT(15) ++#define MR_IP_HDR_LEN_BIT BIT(14) ++#define MR_FLOW_LABLE_BIT BIT(13) ++#define MR_TOS_TRAFFIC_BIT BIT(12) ++#define MR_SPR_BIT(x) BIT(x) ++#define MR_SPR_BITS 0xff ++ ++/********************************************************************** ++ * GMAC Matching Rule Control Register 1 ++ * GMAC0 offset 0x807C ++ * GMAC1 offset 0xC07C ++ **********************************************************************/ ++ typedef union ++{ ++ unsigned int bits32; ++ struct bit_807C ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sip : 1; // bit 31 Srce IP ++ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits ++ unsigned int dip : 1; // bit 23 Dest IP ++ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits ++ unsigned int l4_byte0_15 : 16; // bit 15: 0 ++#else ++ unsigned int l4_byte0_15 : 16; // bit 15: 0 ++ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits ++ unsigned int dip : 1; // bit 23 Dest IP ++ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits ++ unsigned int sip : 1; // bit 31 Srce IP ++#endif ++ } bits; ++} GMAC_MRxCR1_T; ++ ++/********************************************************************** ++ * GMAC Matching Rule Control Register 2 ++ * GMAC0 offset 0x8080 ++ * GMAC1 offset 0xC080 ++ **********************************************************************/ ++ typedef union ++{ ++ unsigned int bits32; ++ struct bit_8080 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int l4_byte16_24: 8; // bit 31: 24 ++ unsigned int l7_byte0_23 : 24; // bit 23:0 ++#else ++ unsigned int l7_byte0_23 : 24; // bit 23:0 ++ unsigned int l4_byte16_24: 8; // bit 31: 24 ++#endif ++ } bits; ++} GMAC_MRxCR2_T; ++ ++ ++/********************************************************************** ++ * GMAC Support registers ++ * GMAC0 offset 0x80A8 ++ * GMAC1 offset 0xC0A8 ++ **********************************************************************/ ++ typedef union ++{ ++ unsigned int bits32; ++ struct bit_80A8 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved: 21; // bit 31:11 ++ unsigned int swap : 3; // bit 10:8 Swap ++ unsigned int protocol: 8; // bit 7:0 Supported protocol ++#else ++ unsigned int protocol: 8; // bit 7:0 Supported protocol ++ unsigned int swap : 3; // bit 10:8 Swap ++ unsigned int reserved: 21; // bit 31:11 ++#endif ++ } bits; ++} GMAC_SPR_T; ++ ++/********************************************************************** ++ * GMAC_AHB_WEIGHT registers ++ * GMAC0 offset 0x80C8 ++ * GMAC1 offset 0xC0C8 ++ **********************************************************************/ ++ typedef union ++{ ++ unsigned int bits32; ++ struct bit_80C8 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 7; // 31:25 ++ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold ++ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold ++ unsigned int tx_weight : 5; // 14:10 ++ unsigned int rx_weight : 5; // 9:5 ++ unsigned int hash_weight : 5; // 4:0 ++#else ++ unsigned int hash_weight : 5; // 4:0 ++ unsigned int rx_weight : 5; // 9:5 ++ unsigned int tx_weight : 5; // 14:10 ++ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold ++ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold ++ unsigned int reserved : 7; // 31:25 ++#endif ++ } bits; ++} GMAC_AHB_WEIGHT_T; ++/********************************************************************** ++ * the register structure of GMAC ++ **********************************************************************/ ++ ++/********************************************************************** ++ * GMAC RX FLTR ++ * GMAC0 Offset 0xA00C ++ * GMAC1 Offset 0xE00C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 27; ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++#else ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int : 27; ++#endif ++ } bits; ++} GMAC_RX_FLTR_T; ++ ++/********************************************************************** ++ * GMAC Configuration 0 ++ * GMAC0 Offset 0xA018 ++ * GMAC1 Offset 0xE018 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0018 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 2; // 31 ++ unsigned int port1_chk_classq : 1; // 29 ++ unsigned int port0_chk_classq : 1; // 28 ++ unsigned int port1_chk_toeq : 1; // 27 ++ unsigned int port0_chk_toeq : 1; // 26 ++ unsigned int port1_chk_hwq : 1; // 25 ++ unsigned int port0_chk_hwq : 1; // 24 ++ unsigned int rx_err_detect : 1; // 23 ++ unsigned int ipv6_exthdr_order: 1; // 22 ++ unsigned int rxc_inv : 1; // 21 ++ unsigned int rgmm_edge : 1; // 20 ++ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */ ++ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */ ++ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */ ++ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */ ++ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */ ++ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */ ++ unsigned int sim_test : 1; /* 13: speed up timers in simulation */ ++ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */ ++ unsigned int dis_bkoff : 1; /* 11: disable back-off function */ ++ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */ ++ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */ ++ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */ ++ unsigned int loop_back : 1; /* 2: transmit data loopback enable */ ++ unsigned int dis_rx : 1; /* 1: disable receive */ ++ unsigned int dis_tx : 1; /* 0: disable transmit */ ++#else ++ unsigned int dis_tx : 1; /* 0: disable transmit */ ++ unsigned int dis_rx : 1; /* 1: disable receive */ ++ unsigned int loop_back : 1; /* 2: transmit data loopback enable */ ++ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */ ++ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */ ++ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */ ++ unsigned int dis_bkoff : 1; /* 11: disable back-off function */ ++ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */ ++ unsigned int sim_test : 1; /* 13: speed up timers in simulation */ ++ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */ ++ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */ ++ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */ ++ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */ ++ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */ ++ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */ ++ unsigned int rgmm_edge : 1; // 20 ++ unsigned int rxc_inv : 1; // 21 ++ unsigned int ipv6_exthdr_order: 1; // 22 ++ unsigned int rx_err_detect : 1; // 23 ++ unsigned int port0_chk_hwq : 1; // 24 ++ unsigned int port1_chk_hwq : 1; // 25 ++ unsigned int port0_chk_toeq : 1; // 26 ++ unsigned int port1_chk_toeq : 1; // 27 ++ unsigned int port0_chk_classq : 1; // 28 ++ unsigned int port1_chk_classq : 1; // 29 ++ unsigned int reserved : 2; // 31 ++#endif ++ } bits; ++} GMAC_CONFIG0_T; ++ ++/********************************************************************** ++ * GMAC Configuration 1 ++ * GMAC0 Offset 0xA01C ++ * GMAC1 Offset 0xE01C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_001c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int reserved : 16; ++ unsigned int rel_threshold : 8; /* flow control release threshold */ ++ unsigned int set_threshold : 8; /* flow control set threshold */ ++#else ++ unsigned int set_threshold : 8; /* flow control set threshold */ ++ unsigned int rel_threshold : 8; /* flow control release threshold */ ++ unsigned int reserved : 16; ++#endif ++ } bits; ++} GMAC_CONFIG1_T; ++ ++#define GMAC_FLOWCTRL_SET_MAX 32 ++#define GMAC_FLOWCTRL_SET_MIN 0 ++#define GMAC_FLOWCTRL_RELEASE_MAX 32 ++#define GMAC_FLOWCTRL_RELEASE_MIN 0 ++ ++/********************************************************************** ++ * GMAC Configuration 2 ++ * GMAC0 Offset 0xA020 ++ * GMAC1 Offset 0xE020 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0020 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++#else ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++#endif ++ } bits; ++} GMAC_CONFIG2_T; ++ ++/********************************************************************** ++ * GMAC Configuration 3 ++ * GMAC0 Offset 0xA024 ++ * GMAC1 Offset 0xE024 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0024 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++#else ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++#endif ++ } bits; ++} GMAC_CONFIG3_T; ++ ++ ++/********************************************************************** ++ * GMAC STATUS ++ * GMAC0 Offset 0xA02C ++ * GMAC1 Offset 0xE02C ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_002c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 25; ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int reserved : 1; ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int link : 1; /* link status */ ++#else ++ unsigned int link : 1; /* link status */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int reserved : 1; ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int : 25; ++#endif ++ } bits; ++} GMAC_STATUS_T; ++ ++#define GMAC_SPEED_10 0 ++#define GMAC_SPEED_100 1 ++#define GMAC_SPEED_1000 2 ++ ++#define GMAC_PHY_MII 0 ++#define GMAC_PHY_GMII 1 ++#define GMAC_PHY_RGMII_100 2 ++#define GMAC_PHY_RGMII_1000 3 ++ ++/********************************************************************** ++ * Queue Header ++ * (1) TOE Queue Header ++ * (2) Non-TOE Queue Header ++ * (3) Interrupt Queue Header ++ * ++ * memory Layout ++ * TOE Queue Header ++ * 0x60003000 +---------------------------+ 0x0000 ++ * | TOE Queue 0 Header | ++ * | 8 * 4 Bytes | ++ * +---------------------------+ 0x0020 ++ * | TOE Queue 1 Header | ++ * | 8 * 4 Bytes | ++ * +---------------------------+ 0x0040 ++ * | ...... | ++ * | | ++ * +---------------------------+ ++ * ++ * Non TOE Queue Header ++ * 0x60002000 +---------------------------+ 0x0000 ++ * | Default Queue 0 Header | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ 0x0008 ++ * | Default Queue 1 Header | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ 0x0010 ++ * | Classification Queue 0 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ ++ * | Classification Queue 1 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ (n * 8 + 0x10) ++ * | ... | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ (13 * 8 + 0x10) ++ * | Classification Queue 13 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ 0x80 ++ * | Interrupt Queue 0 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ ++ * | Interrupt Queue 1 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ ++ * | Interrupt Queue 2 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ ++ * | Interrupt Queue 3 | ++ * | 2 * 4 Bytes | ++ * +---------------------------+ ++ * ++ **********************************************************************/ ++#define TOE_QUEUE_HDR_ADDR(n) (TOE_TOE_QUE_HDR_BASE + n * 32) ++#define TOE_Q_HDR_AREA_END (TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1)) ++#define TOE_DEFAULT_Q0_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x00) ++#define TOE_DEFAULT_Q1_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x08) ++#define TOE_CLASS_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x10) ++#define TOE_INTR_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x80) ++#define INTERRUPT_QUEUE_HDR_ADDR(n) (TOE_INTR_Q_HDR_BASE + n * 8) ++#define NONTOE_Q_HDR_AREA_END (INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1)) ++/********************************************************************** ++ * TOE Queue Header Word 0 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int base_size; ++} TOE_QHDR0_T; ++ ++#define TOE_QHDR0_BASE_MASK (~0x0f) ++ ++/********************************************************************** ++ * TOE Queue Header Word 1 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_qhdr1 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int wptr : 16; // bit 31:16 ++ unsigned int rptr : 16; // bit 15:0 ++#else ++ unsigned int rptr : 16; // bit 15:0 ++ unsigned int wptr : 16; // bit 31:16 ++#endif ++ } bits; ++} TOE_QHDR1_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 2 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_qhdr2 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int usd : 1; // bit 31 0: if no data assembled yet ++ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack) ++ unsigned int osq : 1; // bit 29 1: out of sequence ++ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold ++ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header ++ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option ++ unsigned int abn : 1; // bit 25 1: Abnormal case Found ++ unsigned int dack : 1; // bit 24 1: Duplicated ACK ++ unsigned int reserved : 7; // bit 23:17 ++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size ++#else ++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size ++ unsigned int reserved : 7; // bit 23:17 ++ unsigned int dack : 1; // bit 24 1: Duplicated ACK ++ unsigned int abn : 1; // bit 25 1: Abnormal case Found ++ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option ++ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header ++ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold ++ unsigned int osq : 1; // bit 29 1: out of sequence ++ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack) ++ unsigned int usd : 1; // bit 31 0: if no data assembled yet ++#endif ++ } bits; ++} TOE_QHDR2_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 3 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int seq_num; ++} TOE_QHDR3_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 4 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int ack_num; ++} TOE_QHDR4_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 5 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_qhdr5 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int SeqCnt : 16; // bit 31:16 ++ unsigned int AckCnt : 16; // bit 15:0 ++#else ++ unsigned int AckCnt : 16; // bit 15:0 ++ unsigned int SeqCnt : 16; // bit 31:16 ++#endif ++ } bits; ++} TOE_QHDR5_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 6 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_qhdr6 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int MaxPktSize : 14; // bit 31:18 ++ unsigned int iq_num : 2; // bit 17:16 ++ unsigned int WinSize : 16; // bit 15:0 ++#else ++ unsigned int WinSize : 16; // bit 15:0 ++ unsigned int iq_num : 2; // bit 17:16 ++ unsigned int MaxPktSize : 14; // bit 31:18 ++#endif ++ } bits; ++} TOE_QHDR6_T; ++ ++/********************************************************************** ++ * TOE Queue Header Word 7 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_qhdr7 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int SeqThreshold : 16; // bit 31:16 ++ unsigned int AckThreshold : 16; // bit 15:0 ++#else ++ unsigned int AckThreshold : 16; // bit 15:0 ++ unsigned int SeqThreshold : 16; // bit 31:16 ++#endif ++ } bits; ++} TOE_QHDR7_T; ++ ++/********************************************************************** ++ * TOE Queue Header ++ **********************************************************************/ ++typedef struct ++{ ++ TOE_QHDR0_T word0; ++ TOE_QHDR1_T word1; ++ TOE_QHDR2_T word2; ++ TOE_QHDR3_T word3; ++ TOE_QHDR4_T word4; ++ TOE_QHDR5_T word5; ++ TOE_QHDR6_T word6; ++ TOE_QHDR7_T word7; ++} TOE_QHDR_T; ++ ++/********************************************************************** ++ * NONTOE Queue Header Word 0 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int base_size; ++} NONTOE_QHDR0_T; ++ ++#define NONTOE_QHDR0_BASE_MASK (~0x0f) ++ ++/********************************************************************** ++ * NONTOE Queue Header Word 1 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_nonqhdr1 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int wptr : 16; // bit 31:16 ++ unsigned int rptr : 16; // bit 15:0 ++#else ++ unsigned int rptr : 16; // bit 15:0 ++ unsigned int wptr : 16; // bit 31:16 ++#endif ++ } bits; ++} NONTOE_QHDR1_T; ++ ++/********************************************************************** ++ * Non-TOE Queue Header ++ **********************************************************************/ ++typedef struct ++{ ++ NONTOE_QHDR0_T word0; ++ NONTOE_QHDR1_T word1; ++} NONTOE_QHDR_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header Word 0 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_intrqhdr0 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped ++ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size ++#else ++ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size ++ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped ++#endif ++ } bits; ++} INTR_QHDR0_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header Word 1 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_intrqhdr1 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack) ++ unsigned int osq : 1; // bit 30 1: out of sequence ++ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold ++ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header ++ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option ++ unsigned int abn : 1; // bit 26 1: Abnormal case Found ++ unsigned int dack : 1; // bit 25 1: Duplicated ACK ++ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID ++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size ++#else ++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size ++ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID ++ unsigned int dack : 1; // bit 25 1: Duplicated ACK ++ unsigned int abn : 1; // bit 26 1: Abnormal case Found ++ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option ++ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header ++ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold ++ unsigned int osq : 1; // bit 30 1: out of sequence ++ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack) ++#endif ++ } bits; ++} INTR_QHDR1_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header Word 2 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int seq_num; ++} INTR_QHDR2_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header Word 3 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ unsigned int ack_num; ++} INTR_QHDR3_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header Word 4 ++ **********************************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit_intrqhdr4 ++ { ++#if (BIG_ENDIAN==1) ++ ++ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr. ++ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr. ++#else ++ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr. ++ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr. ++#endif ++ } bits; ++} INTR_QHDR4_T; ++ ++/********************************************************************** ++ * Interrupt Queue Header ++ **********************************************************************/ ++typedef struct ++{ ++ INTR_QHDR0_T word0; ++ INTR_QHDR1_T word1; ++ INTR_QHDR2_T word2; ++ INTR_QHDR3_T word3; ++ INTR_QHDR4_T word4; ++ unsigned int word5; ++ unsigned int word6; ++ unsigned int word7; ++} INTR_QHDR_T; ++ ++/********************************************************************** ++ * GMAC Conf ++ **********************************************************************/ ++typedef struct gmac_conf { ++ struct net_device *dev; ++ int portmap; ++ int vid; ++ int flag; /* 1: active 0: non-active */ ++} sys_gmac_conf; ++ ++/********************************************************************** ++ * GMAC private data ++ **********************************************************************/ ++typedef struct { ++ unsigned int rwptr_reg; ++ unsigned int desc_base; ++ unsigned int total_desc_num; ++ unsigned short finished_idx; ++ GMAC_TXDESC_T *curr_tx_desc; ++ GMAC_TXDESC_T *curr_finished_desc; ++ struct sk_buff *tx_skb[TX_DESC_NUM]; ++ unsigned long total_sent; ++ unsigned long total_finished; ++ unsigned long intr_cnt; ++} GMAC_SWTXQ_T; ++ ++typedef struct { ++ unsigned int desc_base; ++ unsigned long eof_cnt; ++} GMAC_HWTXQ_T; ++ ++typedef struct gmac_private{ ++ struct net_device *dev; ++ unsigned int existed; ++ unsigned int port_id; // 0 or 1 ++ unsigned int base_addr; ++ unsigned int dma_base_addr; ++ unsigned char *mac_addr1; ++ unsigned char *mac_addr2; ++ unsigned int swtxq_desc_base; ++ unsigned int hwtxq_desc_base; ++ GMAC_SWTXQ_T swtxq[TOE_SW_TXQ_NUM]; ++ GMAC_HWTXQ_T hwtxq[TOE_HW_TXQ_NUM]; ++ NONTOE_QHDR_T *default_qhdr; ++ unsigned int default_desc_base; ++ unsigned int default_desc_num; ++ unsigned int rx_curr_desc; ++ DMA_RWPTR_T rx_rwptr; ++ struct sk_buff *curr_rx_skb; ++ dma_addr_t default_desc_base_dma; ++ dma_addr_t swtxq_desc_base_dma; ++ dma_addr_t hwtxq_desc_base_dma; ++ unsigned int irq; ++ unsigned int flow_control_enable ; ++ unsigned int pre_phy_status; ++ unsigned int full_duplex_cfg; ++ unsigned int speed_cfg; ++ unsigned int auto_nego_cfg; ++ unsigned int full_duplex_status; ++ unsigned int speed_status; ++ unsigned int phy_mode; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ ++ unsigned int phy_addr; ++ unsigned int intr0_enabled; // 1: enabled ++ unsigned int intr1_enabled; // 1: enabled ++ unsigned int intr2_enabled; // 1: enabled ++ unsigned int intr3_enabled; // 1: enabled ++ unsigned int intr4_enabled; // 1: enabled ++// unsigned int intr4_enabled_1; // 1: enabled ++ unsigned int intr0_selected; // 1: selected ++ unsigned int intr1_selected; // 1: selected ++ unsigned int intr2_selected; // 1: selected ++ unsigned int intr3_selected; // 1: selected ++ unsigned int intr4_selected; // 1: selected ++ // void (*gmac_rcv_handler)(struct sk_buff *, int); ++ struct net_device_stats ifStatics; ++ unsigned long txDerr_cnt[GMAC_NUM]; ++ unsigned long txPerr_cnt[GMAC_NUM]; ++ unsigned long RxDerr_cnt[GMAC_NUM]; ++ unsigned long RxPerr_cnt[GMAC_NUM]; ++ unsigned int isr_rx_cnt; ++ unsigned int isr_tx_cnt; ++ unsigned long rx_discard; ++ unsigned long rx_error; ++ unsigned long rx_mcast; ++ unsigned long rx_bcast; ++ unsigned long rx_status_cnt[8]; ++ unsigned long rx_chksum_cnt[8]; ++ unsigned long rx_sta1_ucast; // for STA 1 MAC Address ++ unsigned long rx_sta2_ucast; // for STA 2 MAC Address ++ unsigned long mib_full_cnt; ++ unsigned long rx_pause_on_cnt; ++ unsigned long tx_pause_on_cnt; ++ unsigned long rx_pause_off_cnt; ++ unsigned long tx_pause_off_cnt; ++ unsigned long rx_overrun_cnt; ++ unsigned long status_changed_cnt; ++ unsigned long default_q_cnt; ++ unsigned long hw_fq_empty_cnt; ++ unsigned long sw_fq_empty_cnt; ++ unsigned long default_q_intr_cnt; ++ pid_t thr_pid; ++ wait_queue_head_t thr_wait; ++ struct completion thr_exited; ++ spinlock_t lock; ++ int time_to_die; ++ int operation; ++#ifdef SL351x_GMAC_WORKAROUND ++ unsigned long short_frames_cnt; ++#endif ++}GMAC_INFO_T ; ++ ++typedef struct toe_private { ++ unsigned int swfq_desc_base; ++ unsigned int hwfq_desc_base; ++ unsigned int hwfq_buf_base; ++// unsigned int toe_desc_base[TOE_TOE_QUEUE_NUM]; ++// unsigned int toe_desc_num; ++// unsigned int class_desc_base; ++// unsigned int class_desc_num; ++// unsigned int intr_desc_base; ++// unsigned int intr_desc_num; ++// unsigned int intr_buf_base; ++ DMA_RWPTR_T fq_rx_rwptr; ++ GMAC_INFO_T gmac[GMAC_NUM]; ++ dma_addr_t sw_freeq_desc_base_dma; ++ dma_addr_t hw_freeq_desc_base_dma; ++ dma_addr_t hwfq_buf_base_dma; ++ dma_addr_t hwfq_buf_end_dma; ++// dma_addr_t toe_desc_base_dma[TOE_TOE_QUEUE_NUM]; ++// dma_addr_t class_desc_base_dma; ++// dma_addr_t intr_desc_base_dma; ++// dma_addr_t intr_buf_base_dma; ++// unsigned long toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM]; ++// unsigned long toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM]; ++// unsigned long toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM]; ++// unsigned long class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM]; ++// unsigned long class_q_intr_cnt[TOE_CLASS_QUEUE_NUM]; ++} TOE_INFO_T; ++ ++extern TOE_INFO_T toe_private_data; ++ ++#define GMAC_PORT0 0 ++#define GMAC_PORT1 1 ++/********************************************************************** ++ * PHY Definition ++ **********************************************************************/ ++#define HPHY_ADDR 0x01 ++#define GPHY_ADDR 0x02 ++ ++enum phy_state ++{ ++ LINK_DOWN = 0, ++ LINK_UP = 1 ++}; ++ ++/* transmit timeout value */ ++ ++#endif //_GMAC_SL351x_H +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,365 @@ ++/*----------------------------------------------------------------------------------- ++* sl351x_hash_cfg.h ++* ++* Description: ++* ++* History: ++* ++* 9/14/2005 Gary Chen Create ++* ++*-------------------------------------------------------------------------------------*/ ++#ifndef _SL351x_HASH_CFG_H_ ++#define _SL351x_HASH_CFG_H_ 1 ++ ++// #define NAT_DEBUG_MSG 1 ++// #define DEBUG_NAT_MIXED_HW_SW_TX 1 ++#ifdef DEBUG_NAT_MIXED_HW_SW_TX ++ // #define NAT_DEBUG_LAN_HASH_TIMEOUT 1 ++ // #define NAT_DEBUG_WAN_HASH_TIMEOUT 1 ++#endif ++ ++#define IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d) ++#define IPIV1(a) ((a>>24)&0xff) ++#define IPIV2(a) ((a>>16)&0xff) ++#define IPIV3(a) ((a>>8)&0xff) ++#define IPIV4(a) ((a)&0xff) ++ ++#define HASH_MAX_BYTES 64 // 128 ++#define HASH_ACTION_DWORDS 9 ++#define HASH_MAX_DWORDS (HASH_MAX_BYTES / sizeof(u32)) ++#define HASH_MAX_KEY_DWORD (HASH_MAX_DWORDS - HASH_ACTION_DWORDS) ++#define HASH_INIT_KEY 0x534C4F52 ++#define HASH_BITS 12 // 12 : Normal, 7: Simulation ++#define HASH_TOTAL_ENTRIES (1 << HASH_BITS) ++#define HASH_MAX_ENTRIES (1 << 12) ++#define HASH_TOE_ENTRIES (HASH_TOTAL_ENTRIES >> 5) ++#define HASH_BITS_MASK ((1 << HASH_BITS) - 1) ++ ++#define hash_lock(lock) // spin_lock_bh(lock) ++#define hash_unlock(lock) // spin_unlock_bh(lock) ++ ++/*---------------------------------------------------------------------- ++ * special macro ++ ----------------------------------------------------------------------*/ ++#define HASH_PUSH_WORD(cp, data) {*cp++ = (((u16)(data)) ) & 0xff; \ ++ *cp++ = (((u16)(data)) >> 8) & 0xff;} ++#define HASH_PUSH_DWORD(cp, data) {*cp++ = (u8)(((u32)(data)) ) & 0xff; \ ++ *cp++ = (u8)(((u32)(data)) >> 8) & 0xff; \ ++ *cp++ = (u8)(((u32)(data)) >> 16) & 0xff; \ ++ *cp++ = (u8)(((u32)(data)) >> 24) & 0xff;} ++#define HASH_PUSH_BYTE(cp, data) {*cp++ = ((u8)(data)) & 0xff;} ++ ++/*---------------------------------------------------------------------- ++ * key ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u8 port; ++ u16 Ethertype; ++ u8 da[6]; ++ u8 sa[6]; ++ u16 pppoe_sid; ++ u16 vlan_id; ++ u8 ipv4_hdrlen; ++ u8 ip_tos; ++ u8 ip_protocol; ++ u32 ipv6_flow_label; ++ u8 sip[16]; ++ u8 dip[16]; ++ //__u32 sip[4]; ++ //__u32 dip[4]; ++ u8 l4_bytes[24]; ++ u8 l7_bytes[24]; ++ u8 ipv6; // 1: IPv6, 0: IPV4 ++} ENTRY_KEY_T; ++ ++/*---------------------------------------------------------------------- ++ * key for NAT ++ * Note: packed ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u16 Ethertype; // not used ++ u8 port_id; ++ u8 rule_id; ++ u8 ip_protocol; ++ u8 reserved1; // ip_tos, not used ++ u16 reserved2; // not used ++ u32 sip; ++ u32 dip; ++ u16 sport; ++ u16 dport; ++} NAT_KEY_T; ++ ++#define NAT_KEY_DWORD_SIZE (sizeof(NAT_KEY_T)/sizeof(u32)) ++#define NAT_KEY_SIZE (sizeof(NAT_KEY_T)) ++ ++/*---------------------------------------------------------------------- ++ * key for NAT ++ * Note: packed ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u16 Ethertype; // not used ++ u8 port_id; ++ u8 rule_id; ++ u8 ip_protocol; ++ u8 reserved1; // ip_tos, not used ++ u16 reserved2; // not used ++ u32 sip; ++ u32 dip; ++ u16 reserved3; ++ u16 protocol; ++ u16 reserved4; ++ u16 call_id; ++} GRE_KEY_T; ++ ++#define GRE_KEY_DWORD_SIZE (sizeof(GRE_KEY_T)/sizeof(u32)) ++#define GRE_KEY_SIZE (sizeof(GRE_KEY_T)) ++/*---------------------------------------------------------------------- ++ * key present or not ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u32 port : 1; ++ u32 Ethertype : 1; ++ u32 da : 1; ++ u32 sa : 1; ++ u32 pppoe_sid : 1; ++ u32 vlan_id : 1; ++ u32 ipv4_hdrlen : 1; ++ u32 ip_tos : 1; ++ u32 ip_protocol : 1; ++ u32 ipv6_flow_label : 1; ++ u32 sip : 1; ++ u32 dip : 1; ++ u32 l4_bytes_0_3 : 1; ++ u32 l4_bytes_4_7 : 1; ++ u32 l4_bytes_8_11 : 1; ++ u32 l4_bytes_12_15 : 1; ++ u32 l4_bytes_16_19 : 1; ++ u32 l4_bytes_20_23 : 1; ++ u32 l7_bytes_0_3 : 1; ++ u32 l7_bytes_4_7 : 1; ++ u32 l7_bytes_8_11 : 1; ++ u32 l7_bytes_12_15 : 1; ++ u32 l7_bytes_16_19 : 1; ++ u32 l7_bytes_20_23 : 1; ++ u32 reserved : 8; ++} KEY_FIELD_T; ++ ++/*---------------------------------------------------------------------- ++ * action ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u32 reserved0 : 5; // bit 0:4 ++ u32 pppoe : 2; // bit 5:6 ++ u32 vlan : 2; // bit 7:8 ++ u32 sa : 1; // bit 9 ++ u32 da : 1; // bit 10 ++ u32 Dport : 1; // bit 11 ++ u32 Sport : 1; // bit 12 ++ u32 Dip : 1; // bit 13 ++ u32 Sip : 1; // bit 14 ++ u32 sw_id : 1; // bit 15 ++ u32 frag : 1; // bit 16 ++ u32 option : 1; // bit 17 ++ u32 ttl_0 : 1; // bit 18 ++ u32 ttl_1 : 1; // bit 19 ++ u32 mtu : 1; // bit 20 ++ u32 exception : 1; // bit 21 ++ u32 srce_qid : 1; // bit 22 ++ u32 discard : 1; // bit 23 ++ u32 dest_qid : 8; // bit 24:31 ++} ENTRY_ACTION_T; ++ ++#define ACTION_DISCARD_BIT BIT(23) ++#define ACTION_SRCE_QID_BIT BIT(22) ++#define ACTION_EXCEPTION_BIT BIT(21) ++#define ACTION_MTU_BIT BIT(20) ++#define ACTION_TTL_1_BIT BIT(19) ++#define ACTION_TTL_0_BIT BIT(18) ++#define ACTION_IP_OPTION BIT(17) ++#define ACTION_FRAG_BIT BIT(16) ++#define ACTION_SWID_BIT BIT(15) ++#define ACTION_SIP_BIT BIT(14) ++#define ACTION_DIP_BIT BIT(13) ++#define ACTION_SPORT_BIT BIT(12) ++#define ACTION_DPORT_BIT BIT(11) ++#define ACTION_DA_BIT BIT(10) ++#define ACTION_SA_BIT BIT(9) ++#define ACTION_VLAN_DEL_BIT BIT(8) ++#define ACTION_VLAN_INS_BIT BIT(7) ++#define ACTION_PPPOE_DEL_BIT BIT(6) ++#define ACTION_PPPOE_INS_BIT BIT(5) ++#define ACTION_L4_THIRD_BIT BIT(4) ++#define ACTION_L4_FOURTH_BIT BIT(3) ++ ++#define NAT_ACTION_BITS (ACTION_SRCE_QID_BIT | ACTION_EXCEPTION_BIT | \ ++ ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | \ ++ ACTION_IP_OPTION | ACTION_FRAG_BIT | \ ++ ACTION_DA_BIT | ACTION_SA_BIT) ++#define NAT_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT) ++#define NAT_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT) ++#define NAT_PPPOE_LAN2WAN_ACTIONS (NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT) ++#define NAT_PPPOE_WAN2LAN_ACTIONS (NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT) ++#define NAT_PPTP_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT) ++#define NAT_PPTP_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT) ++#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS (NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT) ++#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS (NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT) ++ ++/*---------------------------------------------------------------------- ++ * parameter ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ u8 da[6]; ++ u8 sa[6]; ++ u16 vlan; ++ u16 pppoe; ++ u32 Sip; ++ u32 Dip; ++ u16 Sport; ++ u16 Dport; ++ u16 sw_id; ++ u16 mtu; ++} ENTRY_PARAM_T; ++ ++/*---------------------------------------------------------------------- ++ * Hash Entry ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ char rule; ++ ENTRY_KEY_T key; ++ KEY_FIELD_T key_present; ++ ENTRY_ACTION_T action; ++ ENTRY_PARAM_T param; ++ int index; ++ int total_dwords; ++} HASH_ENTRY_T; ++ ++/*---------------------------------------------------------------------- ++ * NAT Hash Entry ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ short counter; ++ short interval; ++} HASH_TIMEOUT_T; ++ ++/*---------------------------------------------------------------------- ++ * NAT Hash Entry for TCP/UDP protocol ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ NAT_KEY_T key; ++ union { ++ u32 dword; ++ ENTRY_ACTION_T bits; ++ } action; ++ ENTRY_PARAM_T param; ++ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently ++} NAT_HASH_ENTRY_T; ++ ++#define NAT_HASH_ENTRY_SIZE (sizeof(NAT_HASH_ENTRY_T)) ++ ++/*---------------------------------------------------------------------- ++ * GRE Hash Entry for PPTP/GRE protocol ++ ----------------------------------------------------------------------*/ ++typedef struct { ++ GRE_KEY_T key; ++ union { ++ u32 dword; ++ ENTRY_ACTION_T bits; ++ } action; ++ ENTRY_PARAM_T param; ++ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently ++} GRE_HASH_ENTRY_T; ++ ++#define GRE_HASH_ENTRY_SIZE (sizeof(GRE_HASH_ENTRY_T)) ++ ++/*---------------------------------------------------------------------- ++ * External Variables ++ ----------------------------------------------------------------------*/ ++extern char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16))); ++extern u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32]; ++/*---------------------------------------------------------------------- ++* hash_get_valid_flag ++*----------------------------------------------------------------------*/ ++static inline int hash_get_valid_flag(int index) ++{ ++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE; ++ ++#ifdef SL351x_GMAC_WORKAROUND ++ if (index >= (0x80 * 8) && index < (0x8c * 8)) ++ return 1; ++#endif ++ return (hash_valid_bits_ptr[index/32] & (1 << (index %32))); ++} ++ ++/*---------------------------------------------------------------------- ++* hash_get_nat_owner_flag ++*----------------------------------------------------------------------*/ ++static inline int hash_get_nat_owner_flag(int index) ++{ ++ return (hash_nat_owner_bits[index/32] & (1 << (index %32))); ++} ++ ++/*---------------------------------------------------------------------- ++* hash_validate_entry ++*----------------------------------------------------------------------*/ ++static inline void hash_validate_entry(int index) ++{ ++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE; ++ register int ptr = index/32, bits = 1 << (index %32); ++ ++ hash_valid_bits_ptr[ptr] |= bits; ++} ++ ++/*---------------------------------------------------------------------- ++* hash_invalidate_entry ++*----------------------------------------------------------------------*/ ++static inline void hash_invalidate_entry(int index) ++{ ++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE; ++ register int ptr = index/32, bits = 1 << (index %32); ++ ++ hash_valid_bits_ptr[ptr] &= ~(bits); ++} ++ ++/*---------------------------------------------------------------------- ++* hash_nat_enable_owner ++*----------------------------------------------------------------------*/ ++static inline void hash_nat_enable_owner(int index) ++{ ++ hash_nat_owner_bits[index/32] |= (1 << (index % 32)); ++} ++ ++/*---------------------------------------------------------------------- ++* hash_nat_disable_owner ++*----------------------------------------------------------------------*/ ++static inline void hash_nat_disable_owner(int index) ++{ ++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32)); ++} ++ ++/*---------------------------------------------------------------------- ++* hash_get_entry ++*----------------------------------------------------------------------*/ ++static inline void *hash_get_entry(int index) ++{ ++ return (void*) &hash_tables[index][0]; ++} ++ ++/*---------------------------------------------------------------------- ++* Functions ++*----------------------------------------------------------------------*/ ++extern int hash_add_entry(HASH_ENTRY_T *entry); ++extern void sl351x_hash_init(void); ++extern void hash_set_valid_flag(int index, int valid); ++extern void hash_set_nat_owner_flag(int index, int valid); ++extern void *hash_get_entry(int index); ++extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry); ++extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry); ++extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key); ++extern int hash_add_entry(HASH_ENTRY_T *entry); ++extern u16 hash_crc16(u16 crc, u8 *datap, u32 len); ++extern u16 hash_gen_crc16(u8 *datap, u32 len); ++ ++#endif // _SL351x_HASH_CFG_H_ ++ ++ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,211 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* sl_nat_cfg.h ++* ++* Description: ++* - Define the Device Control Commands for NAT Configuration ++* ++* History: ++* ++* 4/28/2006 Gary Chen Create ++* ++*-----------------------------------------------------------------------------*/ ++#ifndef _SL351x_NAT_CFG_H_ ++#define _SL351x_NAT_CFG_H_ 1 ++ ++/*---------------------------------------------------------------------- ++* Confiuration ++*----------------------------------------------------------------------*/ ++#ifdef CONFIG_NETFILTER ++#define CONFIG_SL351x_NAT 1 ++#undef CONFIG_SL351x_NAT ++#undef CONFIG_SL351x_SYSCTL ++#endif ++#define CONFIG_NAT_MAX_IP_NUM 4 // per device (eth0 or eth1) ++#define CONFIG_NAT_MAX_XPORT 64 ++#define CONFIG_NAT_MAX_WRULE 16 // per Queue ++#define CONFIG_NAT_TXQ_NUM 4 ++/*---------------------------------------------------------------------- ++* Command set ++*----------------------------------------------------------------------*/ ++#define SIOCDEVSL351x SIOCDEVPRIVATE // 0x89F0 ++#define NATSSTATUS 0 ++#define NATGSTATUS 1 ++#define NATSETPORT 2 ++#define NATGETPORT 3 ++#define NATADDIP 4 ++#define NATDELIP 5 ++#define NATGETIP 6 ++#define NATAXPORT 7 ++#define NATDXPORT 8 ++#define NATGXPORT 9 ++#define NATSWEIGHT 10 ++#define NATGWEIGHT 11 ++#define NATAWRULE 12 ++#define NATDWRULE 13 ++#define NATGWRULE 14 ++#define NATSDEFQ 15 ++#define NATGDEFQ 16 ++#define NATRMIPCFG 17 // remove IP config ++#define NATTESTENTRY 18 ++#define NATSETMEM 19 ++#define NATSHOWMEM 20 ++/*---------------------------------------------------------------------- ++* Command Structure ++*----------------------------------------------------------------------*/ ++// Common Header ++typedef struct { ++ unsigned short cmd; // command ID ++ unsigned short len; // data length, excluding this header ++} NATCMD_HDR_T; ++ ++// NATSSTATUS & NATGSTATUS commands ++typedef struct { ++ unsigned char enable; ++} NAT_STATUS_T; ++ ++// NATSETPORT & NATGETPORT commands ++typedef struct { ++ unsigned char portmap; ++} NAT_PORTCFG_T; ++ ++typedef struct { ++ unsigned int ipaddr; ++ unsigned int netmask; ++} NAT_IP_ENTRY_T; ++ ++// NATADDIP & NATDELIP commands ++typedef struct { ++ NAT_IP_ENTRY_T entry; ++} NAT_IPCFG_T; ++ ++// NATGETIP command ++typedef struct { ++ unsigned int total; ++ NAT_IP_ENTRY_T entry[CONFIG_NAT_MAX_IP_NUM]; ++} NAT_IPCFG_ALL_T; ++ ++typedef struct { ++ unsigned int protocol; ++ unsigned short sport_start; ++ unsigned short sport_end; ++ unsigned short dport_start; ++ unsigned short dport_end; ++} NAT_XPORT_ENTRY_T; ++ ++// NATAXPORT & NATDXPORT Commands ++typedef struct { ++ NAT_XPORT_ENTRY_T entry; ++} NAT_XPORT_T; ++ ++// NATGXPORT Command ++typedef struct { ++ unsigned int total; ++ NAT_XPORT_ENTRY_T entry[CONFIG_NAT_MAX_XPORT]; ++} NAT_XPORT_ALL_T; ++ ++// NATSWEIGHT & NATGWEIGHT Commands ++typedef struct { ++ unsigned char weight[CONFIG_NAT_TXQ_NUM]; ++} NAT_WEIGHT_T; ++ ++typedef struct { ++ unsigned int protocol; ++ unsigned int sip_start; ++ unsigned int sip_end; ++ unsigned int dip_start; ++ unsigned int dip_end; ++ unsigned short sport_start; ++ unsigned short sport_end; ++ unsigned short dport_start; ++ unsigned short dport_end; ++} NAT_WRULE_ENTRY_T; ++ ++// NATAWRULE & NATDWRULE Commands ++typedef struct { ++ unsigned int qid; ++ NAT_WRULE_ENTRY_T entry; ++} NAT_WRULE_T; ++ ++// NATGWRULE Command ++typedef struct { ++ unsigned int total; ++ NAT_WRULE_ENTRY_T entry[CONFIG_NAT_MAX_WRULE]; ++} NAT_WRULE_ALL_T; ++ ++// NATSDEFQ & NATGDEFQ commands ++typedef struct { ++ unsigned int qid; ++} NAT_QUEUE_T; ++ ++// NATTESTENTRY ++typedef struct { ++ u_int16_t cmd; // command ID ++ u_int16_t len; // data length, excluding this header ++ u_int8_t init_enable; ++} NAT_TESTENTRY_T; ++ ++typedef union ++{ ++ NAT_STATUS_T status; ++ NAT_PORTCFG_T portcfg; ++ NAT_IPCFG_T ipcfg; ++ NAT_XPORT_T xport; ++ NAT_WEIGHT_T weight; ++ NAT_WRULE_T wrule; ++ NAT_QUEUE_T queue; ++ NAT_TESTENTRY_T init_entry; ++} NAT_REQ_E; ++ ++/*---------------------------------------------------------------------- ++* NAT Configuration ++* - Used by driver only ++*----------------------------------------------------------------------*/ ++typedef struct { ++ unsigned int enabled; ++ unsigned int init_enabled; ++ unsigned int tcp_udp_rule_id; ++ unsigned int gre_rule_id; ++ unsigned int lan_port; ++ unsigned int wan_port; ++ unsigned int default_hw_txq; ++ short tcp_tmo_interval; ++ short udp_tmo_interval; ++ short gre_tmo_interval; ++ NAT_IPCFG_ALL_T ipcfg[2]; // LAN/WAN port ++ NAT_XPORT_ALL_T xport; ++ NAT_WEIGHT_T weight; ++ NAT_WRULE_ALL_T wrule[CONFIG_NAT_TXQ_NUM]; ++} NAT_CFG_T; ++ ++/*---------------------------------------------------------------------- ++* NAT Control Block ++* - Used by driver only ++* - Stores LAN-IN or WAN-IN information ++* - WAN-OUT and LAN-OUT driver use them to build up a hash entry ++* - NOTES: To update this data structure, MUST take care of alignment issue ++* - MUST make sure that the size of skbuff structure must ++* be larger than (40 + sizof(NAT_CB_T)) ++*----------------------------------------------------------------------*/ ++typedef struct { ++ unsigned short tag; ++ unsigned char sa[6]; ++ unsigned int sip; ++ unsigned int dip; ++ unsigned short sport; ++ unsigned short dport; ++ unsigned char pppoe_frame; ++ unsigned char state; // same to enum tcp_conntrack ++ unsigned char reserved[2]; ++} NAT_CB_T; ++ ++#define NAT_CB_TAG 0x4C53 // "SL" ++#define NAT_CB_SIZE sizeof(NAT_CB_T) ++// #define NAT_SKB_CB(skb) (NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3) // for align 4 ++#define NAT_SKB_CB(skb) (NAT_CB_T *)&((skb)->cb[40]) // for align 4 ++ ++#endif // _SL351x_NAT_CFG_H_ ++ ++ ++ +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_toe.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_toe.h 2008-03-15 16:57:25.854761029 +0200 +@@ -0,0 +1,88 @@ ++/************************************************************************** ++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved. ++*-------------------------------------------------------------------------- ++* Name : sl351x_toe.h ++* Description : ++* Define for TOE driver of Storlink SL351x ++* ++* History ++* ++* Date Writer Description ++*---------------------------------------------------------------------------- ++* Xiaochong Create ++* ++****************************************************************************/ ++#ifndef __SL351x_TOE_H ++#define __SL351x_TOE_H 1 ++#include <net/sock.h> ++#include <asm/arch/sl351x_gmac.h> ++#include <linux/timer.h> ++#include <linux/netdevice.h> ++#include <linux/ip.h> ++#include <linux/if_ether.h> ++/* ++ * TOE_CONN_T is data structure of tcp connection info, used at both ++ * device layer and kernel tcp layer ++ * skb is the jumbo frame ++ */ ++ ++struct toe_conn{ ++ __u8 qid; // connection qid 0~63. ++ __u8 ip_ver; // 0: not used; 4: ipv4; 6: ipv6. ++ /* hash key of the connection */ ++ __u16 source; ++ __u16 dest; ++ __u32 saddr[4]; ++ __u32 daddr[4]; ++ ++ __u32 seq; ++ __u32 ack_seq; ++ ++ /* these fields are used to set TOE QHDR */ ++ __u32 ack_threshold; ++ __u32 seq_threshold; ++ __u16 max_pktsize; ++ ++ /* used by sw toe, accumulated ack_seq of ack frames */ ++ __u16 ack_cnt; ++ /* used by sw toe, accumulated data frames held at driver */ ++ __u16 cur_pktsize; ++ ++ __u8 status; ++#define TCP_CONN_UNDEFINE 0X00 ++#define TCP_CONN_CREATION 0X01 ++#define TCP_CONN_CONNECTING 0X02 ++#define TCP_CONN_ESTABLISHED 0X04 ++#define TCP_CONN_RESET 0X08 // this is used for out-of-order ++ // or congestion window is small ++#define TCP_CONN_CLOSING 0X10 ++#define TCP_CONN_CLOSED 0x11 ++ ++ __u16 hash_entry_index; /* associated hash entry */ ++ ++ // one timer per connection. Otherwise all connections should be scanned ++ // in a timeout interrupt, and timeout interrupt is triggered no matter ++ // a connection is actually timeout or not. ++ struct timer_list rx_timer; ++ unsigned long last_rx_jiffies; ++ GMAC_INFO_T *gmac; ++ struct net_device *dev; ++ ++ // for generating pure ack frame. ++ struct ethhdr l2_hdr; ++ struct iphdr l3_hdr; ++ ++ spinlock_t conn_lock; ++ DMA_RWPTR_T toeq_rwptr; ++ GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *curr_rx_skb; ++}; ++ ++struct jumbo_frame { ++ struct sk_buff *skb0; // the head of jumbo frame ++ struct sk_buff *tail; // the tail of jumbo frame ++ struct iphdr *iphdr0; // the ip hdr of skb0. ++ struct tcphdr *tcphdr0; // the tcp hdr of skb0. ++}; ++ ++#endif // __SL351x_TOE_H diff --git a/target/linux/storm/patches/1003-gmac_one_phy.patch b/target/linux/storm/patches/1003-gmac_one_phy.patch new file mode 100644 index 0000000000..4697a2b34c --- /dev/null +++ b/target/linux/storm/patches/1003-gmac_one_phy.patch @@ -0,0 +1,13 @@ +Index: linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h +=================================================================== +--- linux-2.6.x.orig/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:18:28.540865746 +0300 ++++ linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:15:55.584200244 +0300 +@@ -21,7 +21,7 @@ + #undef BIG_ENDIAN + #define BIG_ENDIAN 0 + #define GMAC_DEBUG 1 +-#define GMAC_NUM 2 ++#define GMAC_NUM 1 + //#define L2_jumbo_frame 1 + + #define _PACKED_ __attribute__ ((aligned(1), packed)) diff --git a/target/linux/storm/patches/1004-gmac-enable-napi.patch b/target/linux/storm/patches/1004-gmac-enable-napi.patch new file mode 100644 index 0000000000..6317160a09 --- /dev/null +++ b/target/linux/storm/patches/1004-gmac-enable-napi.patch @@ -0,0 +1,83 @@ +Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c +=================================================================== +--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 16:59:23.361457295 +0200 ++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200 +@@ -68,9 +68,11 @@ + #include <linux/ip.h> + #endif + ++/* Enables NAPI unconditionally */ ++#define CONFIG_SL_NAPI 1 ++ + // #define SL351x_TEST_WORKAROUND + #ifdef CONFIG_SL351x_NAT +-#define CONFIG_SL_NAPI 1 + #endif + #define GMAX_TX_INTR_DISABLED 1 + #define DO_HW_CHKSUM 1 +@@ -124,12 +126,17 @@ + *************************************************************/ + static int gmac_initialized = 0; + TOE_INFO_T toe_private_data; +-//static int do_again = 0; ++static int do_again = 0; + spinlock_t gmac_fq_lock; + unsigned int FLAG_SWITCH; + + static unsigned int next_tick = 3 * HZ; +-static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}}; ++static unsigned char eth_mac[CONFIG_MAC_NUM][6]= { ++ {0x00,0x11,0x11,0x87,0x87,0x87}, ++#if GMAC_NUM != 1 ++ {0x00,0x22,0x22,0xab,0xab,0xab} ++#endif ++}; + + #undef CONFIG_SL351x_RXTOE + extern NAT_CFG_T nat_cfg; +@@ -2443,7 +2450,8 @@ + toe = (TOE_INFO_T *)&toe_private_data; + // handle NAPI + #ifdef CONFIG_SL_NAPI +-if (storlink_ctl.pauseoff == 1) ++ /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */ ++if (1) + { + /* disable GMAC interrupt */ + //toe_gmac_disable_interrupt(tp->irq); +@@ -2530,7 +2538,7 @@ + { + if (likely(netif_rx_schedule_prep(dev))) + { +- unsigned int data32; ++ // unsigned int data32; + // disable GMAC-0 rx interrupt + // class-Q & TOE-Q are implemented in future + //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +@@ -2563,7 +2571,7 @@ + { + if (likely(netif_rx_schedule_prep(dev))) + { +- unsigned int data32; ++ // unsigned int data32; + // disable GMAC-0 rx interrupt + // class-Q & TOE-Q are implemented in future + //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +@@ -4217,7 +4225,7 @@ + GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; + unsigned int status4; + volatile DMA_RWPTR_T fq_rwptr; +- int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64 ++ // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64 + //unsigned long rx_old_bytes; + struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; + //unsigned long long rx_time; +@@ -4479,7 +4487,7 @@ + + if (rwptr.bits.rptr == rwptr.bits.wptr) + { +- unsigned int data32; ++ // unsigned int data32; + //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); + + /* Receive descriptor is empty now */ diff --git a/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch b/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch new file mode 100644 index 0000000000..b072fe20df --- /dev/null +++ b/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch @@ -0,0 +1,250 @@ +Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c +=================================================================== +--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200 ++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:55.366700383 +0200 +@@ -127,6 +127,7 @@ + static int gmac_initialized = 0; + TOE_INFO_T toe_private_data; + static int do_again = 0; ++static int rx_poll_enabled; + spinlock_t gmac_fq_lock; + unsigned int FLAG_SWITCH; + +@@ -1065,7 +1066,8 @@ + tp->intr3_enabled = 0xffffffff; + tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS | + HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT; +- tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT; ++ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT; ++ // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT; + + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); +@@ -1115,7 +1117,7 @@ + tp->intr3_enabled |= 0xffffffff; + tp->intr4_selected |= CLASS_RX_FULL_INT_BITS | + HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT; +- tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT; ++ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT; + } + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); +@@ -2408,7 +2410,7 @@ + // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1; + + fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- spin_lock_irqsave(&gmac_fq_lock, flags); ++ // spin_lock_irqsave(&gmac_fq_lock, flags); + //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, + // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) { + while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, +@@ -2428,10 +2430,47 @@ + SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); + toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32; + } +- spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ // spin_unlock_irqrestore(&gmac_fq_lock, flags); + } + // EXPORT_SYMBOL(toe_gmac_fill_free_q); + ++static void gmac_registers(const char *message) ++{ ++ unsigned int status0; ++ unsigned int status1; ++ unsigned int status2; ++ unsigned int status3; ++ unsigned int status4; ++ ++ printk("%s\n", message); ++ ++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); ++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ ++ printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", ++ status0, status1, status2, status3, status4); ++ ++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG); ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG); ++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ ++ printk("mask : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", ++ status0, status1, status2, status3, status4); ++ ++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG); ++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG); ++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ ++ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", ++ status0, status1, status2, status3, status4); ++} + /*---------------------------------------------------------------------- + * toe_gmac_interrupt + *----------------------------------------------------------------------*/ +@@ -2492,6 +2531,7 @@ + writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG); + if (status4) + writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ + #if 0 + /* handle freeq interrupt first */ + if (status4 & tp->intr4_enabled) { +@@ -2536,10 +2576,31 @@ + } + if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT)) + { +- if (likely(netif_rx_schedule_prep(dev))) ++ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev))) + { +- // unsigned int data32; +- // disable GMAC-0 rx interrupt ++ unsigned int data32; ++ ++ if (rx_poll_enabled) ++ gmac_registers("check #1"); ++ ++ BUG_ON(rx_poll_enabled == 1); ++ ++#if 0 ++ /* Masks GMAC-0 rx interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ data32 &= ~(DEFAULT_Q0_INT_BIT); ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ ++ /* Masks GMAC-0 queue empty interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ data32 &= ~DEFAULT_Q0_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ data32 &= ~DEFAULT_Q0_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++#endif ++ + // class-Q & TOE-Q are implemented in future + //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + //data32 &= ~DEFAULT_Q0_INT_BIT; +@@ -2549,7 +2610,8 @@ + //tp->total_q_cnt_napi=0; + //rx_time = jiffies; + //rx_old_bytes = isPtr->rx_bytes; +- __netif_rx_schedule(dev); ++ __netif_rx_schedule(dev); ++ rx_poll_enabled = 1; + } + } + } +@@ -2569,9 +2631,31 @@ + + if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) + { +- if (likely(netif_rx_schedule_prep(dev))) ++ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev))) + { +- // unsigned int data32; ++ unsigned int data32; ++ ++ if (rx_poll_enabled) ++ gmac_registers("check #2"); ++ ++ BUG_ON(rx_poll_enabled == 1); ++ ++#if 0 ++ /* Masks GMAC-1 rx interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ data32 &= ~(DEFAULT_Q1_INT_BIT); ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ ++ /* Masks GMAC-1 queue empty interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ data32 &= ~DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ data32 &= ~DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++#endif ++ + // disable GMAC-0 rx interrupt + // class-Q & TOE-Q are implemented in future + //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +@@ -2583,9 +2667,13 @@ + //rx_time = jiffies; + //rx_old_bytes = isPtr->rx_bytes; + __netif_rx_schedule(dev); ++ rx_poll_enabled = 1; + } + } + } ++ } else { ++ ++ gmac_registers("check #3"); + } + + // Interrupt Status 0 +@@ -3306,8 +3394,10 @@ + SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); + tp->rx_rwptr.bits32 = rwptr.bits32; + +- toe_gmac_fill_free_q(); + } ++ ++ /* Handles first available packets only then refill the queue. */ ++ toe_gmac_fill_free_q(); + } + + /*---------------------------------------------------------------------- +@@ -4217,6 +4307,7 @@ + GMAC_RXDESC_T *curr_desc; + struct sk_buff *skb; + DMA_RWPTR_T rwptr; ++ unsigned int data32; + unsigned int pkt_size; + unsigned int desc_count; + unsigned int good_frame, chksum_status, rx_status; +@@ -4231,7 +4322,7 @@ + //unsigned long long rx_time; + + +- ++ BUG_ON(rx_poll_enabled == 0); + #if 1 + if (do_again) + { +@@ -4516,6 +4607,30 @@ + #endif + //toe_gmac_fill_free_q(); + netif_rx_complete(dev); ++ ++ rx_poll_enabled = 0; ++ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ if (tp->port_id == 0) ++ data32 |= DEFAULT_Q0_INT_BIT; ++ else ++ data32 |= DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ if (tp->port_id == 0) ++ data32 |= DEFAULT_Q0_INT_BIT; ++ else ++ data32 |= DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ if (tp->port_id == 0) ++ data32 |= DEFAULT_Q0_INT_BIT; ++ else ++ data32 |= DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ + // enable GMAC-0 rx interrupt + // class-Q & TOE-Q are implemented in future + //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); diff --git a/target/linux/storm/patches/1006-gmac-napi-tx.patch b/target/linux/storm/patches/1006-gmac-napi-tx.patch new file mode 100644 index 0000000000..7ba63b85a1 --- /dev/null +++ b/target/linux/storm/patches/1006-gmac-napi-tx.patch @@ -0,0 +1,2098 @@ +Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c +=================================================================== +--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 17:00:55.366700383 +0200 ++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:01:08.367441241 +0200 +@@ -43,9 +43,13 @@ + + #include <linux/mtd/kvctl.h> + ++#define GET_RPTR(x) ((x) & 0xFFFF) ++#define GET_WPTR(x) ((x) >> 16) ++ + #define MIDWAY + #define SL_LEPUS +-#define VITESSE_G5SWITCH 1 ++// #define VITESSE_G5SWITCH 1 ++#undef VITESSE_G5SWITCH + + #ifndef CONFIG_SL351x_RXTOE + //#define CONFIG_SL351x_RXTOE 1 +@@ -126,7 +130,6 @@ + *************************************************************/ + static int gmac_initialized = 0; + TOE_INFO_T toe_private_data; +-static int do_again = 0; + static int rx_poll_enabled; + spinlock_t gmac_fq_lock; + unsigned int FLAG_SWITCH; +@@ -190,7 +193,7 @@ + void mac_set_sw_tx_weight(struct net_device *dev, char *weight); + void mac_get_hw_tx_weight(struct net_device *dev, char *weight); + void mac_set_hw_tx_weight(struct net_device *dev, char *weight); +-static inline void toe_gmac_fill_free_q(void); ++static inline void toe_gmac_fill_free_q(int count); + + #ifdef VITESSE_G5SWITCH + extern int Get_Set_port_status(void); +@@ -295,12 +298,14 @@ + for(j = 0; i<CONFIG_MAC_NUM; j++) + { + i=j; ++#ifdef VITESSE_G5SWITCH + if(Giga_switch){ // if gswitch present, swap eth0/1 + if(j==0) + i=1; + else if(j==1) + i=0; + } ++#endif + + tp = (GMAC_INFO_T *)&toe_private_data.gmac[i]; + tp->dev = NULL; +@@ -459,7 +464,7 @@ + toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE; + toe->gmac[0].auto_nego_cfg = 1; + toe->gmac[1].auto_nego_cfg = 1; +-#ifdef CONFIG_SL3516_ASIC ++#ifndef CONFIG_SL3516_ASIC + toe->gmac[0].speed_cfg = GMAC_SPEED_1000; + toe->gmac[1].speed_cfg = GMAC_SPEED_1000; + #else +@@ -508,7 +513,7 @@ + // Write GLOBAL_QUEUE_THRESHOLD_REG + threshold.bits32 = 0; + threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 : +- TOE_SW_FREEQ_DESC_NUM/2; ++ TOE_SW_FREEQ_DESC_NUM/16; + threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 : + TOE_HW_FREEQ_DESC_NUM/4; + threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 : +@@ -613,18 +618,25 @@ + rwptr_reg.bits.rptr = 0; + toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32; + writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG)); + + // SW Free Queue Descriptors + for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++) + { ++ void *data = NULL; + sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE; +- sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb ++ sw_desc_ptr->word1.bits.sw_id = 0; // used to locate skb + if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */ + { + printk("%s::skb buffer allocation fail !\n",__func__); while(1); + } +- REG32(skb->data) = (unsigned int)skb; ++ ++ data = skb->data; + skb_reserve(skb, SKB_RESERVE_BYTES); ++ ++ REG32(data + 0) = (unsigned int)skb; ++ REG32(data + 4) = (unsigned short)i; ++ + // toe->rx_skb[i] = skb; + sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data); + // consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE); +@@ -851,14 +863,14 @@ + *----------------------------------------------------------------------*/ + static void toe_init_default_queue(void) + { +- TOE_INFO_T *toe; ++ TOE_INFO_T *toe; + volatile NONTOE_QHDR_T *qhdr; +- GMAC_RXDESC_T *desc_ptr; +- DMA_SKB_SIZE_T skb_size; ++ GMAC_RXDESC_T *desc_ptr; ++ DMA_SKB_SIZE_T skb_size; + + toe = (TOE_INFO_T *)&toe_private_data; + desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)), +- (dma_addr_t *)&toe->gmac[0].default_desc_base_dma); ++ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma); + if (!desc_ptr) + { + printk("%s::DMA_MALLOC fail !\n",__func__); +@@ -866,14 +878,17 @@ + } + memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)); + toe->gmac[0].default_desc_base = (unsigned int)desc_ptr; ++ printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma); ++ + toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM; + qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE; + qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER; + qhdr->word1.bits32 = 0; + toe->gmac[0].rx_rwptr.bits32 = 0; + toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr; ++ + desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)), +- (dma_addr_t *)&toe->gmac[1].default_desc_base_dma); ++ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma); + if (!desc_ptr) + { + printk("%s::DMA_MALLOC fail !\n",__func__); +@@ -1071,12 +1086,16 @@ + + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG); ++ + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG); ++ + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG); ++ + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); ++ + data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected; + writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); + } +@@ -1176,11 +1195,11 @@ + GMAC_CONFIG2_T config2_val; + GMAC_CONFIG0_T config0,config0_mask; + GMAC_CONFIG1_T config1; +- #ifdef CONFIG_SL351x_NAT + GMAC_CONFIG3_T config3_val; +- #endif + GMAC_TX_WCR0_T hw_weigh; + GMAC_TX_WCR1_T sw_weigh; ++ ++ uint32_t weight = 0; + // GMAC_HASH_ENABLE_REG0_T hash_ctrl; + // + #if 0 /* mac address will be set in late_initcall */ +@@ -1202,24 +1221,23 @@ + // config1.bits32 = 0x002004; //next version + /* set flow control threshold */ + config1.bits32 = 0; +- config1.bits.set_threshold = 32 / 2; +- config1.bits.rel_threshold = 32 / 4 * 3; ++ config1.bits.set_threshold = (32 / 2); ++ config1.bits.rel_threshold = (32 / 4) * 3; + gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff); + +- /* set flow control threshold */ ++ /* TODO: set flow control threshold */ + config2_val.bits32 = 0; +- config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2; +- config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4; ++ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4; ++ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2; + gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff); + +- #ifdef CONFIG_SL351x_NAT +- /* set HW free queue flow control threshold */ ++ /* TODO: set HW free queue flow control threshold */ + config3_val.bits32 = 0; + config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ; + config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ; + gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff); +- #endif +- /* set_mcast_filter mask*/ ++ ++ /* TODO: set_mcast_filter mask*/ + // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff); + // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff); + +@@ -1249,7 +1267,7 @@ + config0.bits.dis_rx = 1; /* disable rx */ + config0.bits.dis_tx = 1; /* disable tx */ + config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ +- config0.bits.rx_err_detect = 1; ++ config0.bits.rx_err_detect = 1; /* TODO: was 1, means disabled, 0 enabled ! */ + config0.bits.rgmii_en = 0; + config0.bits.rgmm_edge = 1; + config0.bits.rxc_inv = 0; +@@ -1342,6 +1360,9 @@ + gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32); + #endif + ++ weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG); ++ printk("====> %08X\n", weight); ++ + #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE) + gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff); + #endif +@@ -1552,7 +1573,7 @@ + rwptr.bits32 = readl(swtxq->rwptr_reg); + if (rwptr.bits.rptr == swtxq->finished_idx) + break; +- curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; ++ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; + // consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE); + word0.bits32 = curr_desc->word0.bits32; + word1.bits32 = curr_desc->word1.bits32; +@@ -1573,6 +1594,7 @@ + swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num); + curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx; + word0.bits32 = curr_desc->word0.bits32; ++ + #ifdef _DUMP_TX_TCP_CONTENT + if (curr_desc->word0.bits.buffer_size < 16) + { +@@ -1592,12 +1614,12 @@ + word0.bits.status_tx_ok = 0; + if (swtxq->tx_skb[swtxq->finished_idx]) + { +- if (interrupt) +- dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]); +- else +- dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]); ++ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]); + swtxq->tx_skb[swtxq->finished_idx] = NULL; ++ } else { ++ BUG(); + } ++ + curr_desc->word0.bits32 = word0.bits32; + swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc; + swtxq->total_finished++; +@@ -1624,31 +1646,29 @@ + *----------------------------------------------------------------------*/ + static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev) + { +- GMAC_INFO_T *tp= dev->priv; +-// static unsigned int pcount = 0; +-// unsigned int tx_qid; +- DMA_RWPTR_T rwptr; +- volatile GMAC_TXDESC_T *curr_desc; +- int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */ +- int frag_id = 0; +- int len, total_len = skb->len; ++ GMAC_INFO_T *tp= dev->priv; ++ DMA_RWPTR_T rwptr; ++ GMAC_TXDESC_T *curr_desc; ++ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */ ++ int frag_id = 0; ++ int len, total_len = skb->len; + struct net_device_stats *isPtr; +- unsigned int free_desc; +- GMAC_SWTXQ_T *swtxq; ++ unsigned int free_desc; ++ GMAC_SWTXQ_T *swtxq; + register unsigned long word0, word1, word2, word3; + unsigned short wptr, rptr; + #ifdef L2_jumbo_frame + int header_len = skb->len; + struct iphdr *ip_hdr; +- struct tcphdr *tcp_hdr; +- int tcp_hdr_len; +- unsigned char *ptr; +- int data_len,a; +- unsigned int val; ++ struct tcphdr *tcp_hdr; ++ int tcp_hdr_len; ++ unsigned char *ptr; ++ int data_len,a; ++ unsigned int val; + #endif + + #ifdef GMAC_LEN_1_2_ISSUE +- int total_pages; ++ int total_pages; + total_pages = snd_pages; + #endif + +@@ -1664,13 +1684,6 @@ + } + #endif + +-#if 0 +- if (storlink_ctl.recvfile==2) +- { +- printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len); +- } +-#endif +- + #ifdef GMAC_USE_TXQ0 + #define tx_qid 0 + #endif +@@ -1703,9 +1716,9 @@ + toe_gmac_tx_complete(tp, tx_qid, dev, 0); + + if (wptr >= swtxq->finished_idx) +- free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx; ++ free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx; + else +- free_desc = swtxq->finished_idx - wptr - 1; ++ free_desc = swtxq->finished_idx - wptr; + if (free_desc < snd_pages) + { + // spin_unlock(&tp->tx_mutex); +@@ -2063,9 +2076,10 @@ + struct net_device_stats * gmac_get_stats(struct net_device *dev) + { + GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++#if 0 /* don't read stats from hardware, scary numbers. */ + // unsigned int flags; +- unsigned int pkt_drop; +- unsigned int pkt_error; ++ unsigned int pkt_drop = 0; ++ unsigned int pkt_error = 0; + + if (netif_running(dev)) + { +@@ -2073,10 +2087,14 @@ + // spin_lock_irqsave(&tp->lock,flags); + pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS); + pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS); ++ printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop); ++ + tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop; + tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error; + // spin_unlock_irqrestore(&tp->lock,flags); + } ++#endif ++ + return &tp->ifStatics; + } + +@@ -2401,36 +2419,63 @@ + * toe_gmac_fill_free_q + * allocate buffers for free queue. + *----------------------------------------------------------------------*/ +-static inline void toe_gmac_fill_free_q(void) ++static inline void toe_gmac_fill_free_q(int count) + { + struct sk_buff *skb; + volatile DMA_RWPTR_T fq_rwptr; + volatile GMAC_RXDESC_T *fq_desc; +- unsigned long flags; ++ unsigned long flags; ++ unsigned short index; ++ int filled = 0; ++ static int entered; + // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1; + ++ BUG_ON(entered == 1); ++ ++ entered = 1; ++ ++ + fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); + // spin_lock_irqsave(&gmac_fq_lock, flags); + //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, + // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) { +- while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, +- TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) { ++ index = fq_rwptr.bits.wptr; ++#if 0 ++ printk("wptr: %hu, rptr: %hu, refill idx: %hu\n", ++ GET_RPTR(fq_rwptr.bits32), ++ GET_WPTR(fq_rwptr.bits32), ++ index); ++#endif ++ ++ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM); ++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index; ++ while (fq_desc->word2.buf_adr == 0) { ++ void *data = NULL; ++ + if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) { + printk("%s::skb allocation fail!\n", __func__); +- //while(1); +- break; ++ goto out; + } +- REG32(skb->data) = (unsigned int)skb; ++ ++ filled; ++ data = skb->data; + skb_reserve(skb, SKB_RESERVE_BYTES); +- // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, +- TOE_SW_FREEQ_DESC_NUM); +- fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr; ++ ++ REG32(data + 0) = (unsigned int)skb; ++ REG32(data + 4) = (unsigned short)index; ++ ++ // printk("refill skb: %p, idx: %hu\n", skb, index); + fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data); +- SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr); +- toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32; ++ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index); ++ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0); ++ ++ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM); ++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index; + } ++out: + // spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ ++ entered = 0; + } + // EXPORT_SYMBOL(toe_gmac_fill_free_q); + +@@ -2442,14 +2487,14 @@ + unsigned int status3; + unsigned int status4; + +- printk("%s\n", message); +- + status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); + status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); + status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); + status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); + status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); + ++ printk("%s\n", message); ++ + printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", + status0, status1, status2, status3, status4); + +@@ -2468,8 +2513,9 @@ + status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG); + status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); + +- printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", +- status0, status1, status2, status3, status4); ++ if (status0 || status1 || status2 || status3 || status4) ++ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n", ++ status0, status1, status2, status3, status4); + } + /*---------------------------------------------------------------------- + * toe_gmac_interrupt +@@ -2485,75 +2531,44 @@ + unsigned int status3; + unsigned int status4; + +-// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; + toe = (TOE_INFO_T *)&toe_private_data; +-// handle NAPI +-#ifdef CONFIG_SL_NAPI +- /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */ +-if (1) +-{ +-/* disable GMAC interrupt */ +- //toe_gmac_disable_interrupt(tp->irq); + +-// isPtr->interrupts++; ++ if (0 && rx_poll_enabled) { ++ gmac_registers("interrupt handler"); ++ } ++ + /* read Interrupt status */ + status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); + status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); + status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); + status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); + status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); +- // prompt warning if status bit ON but not enabled ++ + #if 0 +- if (status0 & ~tp->intr0_enabled) +- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n", +- status0, tp->intr0_enabled); +- if (status1 & ~tp->intr1_enabled) +- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n", +- status1, tp->intr1_enabled); +- if (status2 & ~tp->intr2_enabled) +- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n", +- status2, tp->intr2_enabled); +- if (status3 & ~tp->intr3_enabled) +- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n", +- status3, tp->intr3_enabled); +- if (status4 & ~tp->intr4_enabled) +- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n", +- status4, tp->intr4_enabled); ++ /* handle freeq interrupt first */ ++ if (status4 & SWFQ_EMPTY_INT_BIT) ++ { ++ toe_gmac_fill_free_q(); ++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ tp->sw_fq_empty_cnt++; ++ } + #endif + ++ if (status4 & GMAC0_MIB_INT_BIT) ++ writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ ++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT) ++ writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ + if (status0) + writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG); +- if (status1) +- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG); + if (status2) + writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG); + if (status3) + writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG); +- if (status4) +- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); +- +-#if 0 +- /* handle freeq interrupt first */ +- if (status4 & tp->intr4_enabled) { +- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) +- { +- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, +- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); +- +- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev)) +- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]); +- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev)) +- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]); +- printk("\nfreeq int\n"); +- toe_gmac_fill_free_q(); +- tp->sw_fq_empty_cnt++; + +- } +- } +-#endif + // Interrupt Status 1 +- if (status1 & tp->intr1_enabled) ++ if ((status1 & 3) || (status4 & 1)) + { + #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT) + #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT) +@@ -2563,7 +2578,7 @@ + // because they should pass packets to upper layer + if (tp->port_id == 0) + { +- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) ++ if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1)) + { + if (status1 & GMAC0_HWTQ03_EOF_INT_BIT) + tp->hwtxq[3].eof_cnt++; +@@ -2574,50 +2589,51 @@ + if (status1 & GMAC0_HWTQ00_EOF_INT_BIT) + tp->hwtxq[0].eof_cnt++; + } +- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT)) ++ if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1) ++ { ++ if (likely(netif_rx_schedule_prep(dev))) + { +- if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev))) +- { +- unsigned int data32; ++ unsigned int data32; ++ ++ BUG_ON(rx_poll_enabled == 1); + +- if (rx_poll_enabled) +- gmac_registers("check #1"); ++ /* Masks GMAC-0 rx interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ data32 &= ~(DEFAULT_Q0_INT_BIT); ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + +- BUG_ON(rx_poll_enabled == 1); ++ /* Masks GMAC-0 queue empty interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ data32 &= ~DEFAULT_Q0_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); + ++ __netif_rx_schedule(dev); ++ rx_poll_enabled = 1; ++ } else { + #if 0 +- /* Masks GMAC-0 rx interrupt */ +- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- data32 &= ~(DEFAULT_Q0_INT_BIT); +- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- +- /* Masks GMAC-0 queue empty interrupt */ +- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); +- data32 &= ~DEFAULT_Q0_INT_BIT; +- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); +- +- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); +- data32 &= ~DEFAULT_Q0_INT_BIT; +- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); +-#endif +- +- // class-Q & TOE-Q are implemented in future +- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- //data32 &= ~DEFAULT_Q0_INT_BIT; +- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__); +- writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); +- //tp->total_q_cnt_napi=0; +- //rx_time = jiffies; +- //rx_old_bytes = isPtr->rx_bytes; +- __netif_rx_schedule(dev); +- rx_poll_enabled = 1; +- } ++ unsigned int data32; ++ ++ if (rx_poll_enabled) ++ gmac_registers("->poll() running."); ++ /* Masks GMAC-0 rx interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ data32 &= ~(DEFAULT_Q0_INT_BIT); ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ ++ /* Masks GMAC-0 queue empty interrupt */ ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++ data32 &= ~DEFAULT_Q0_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); ++#endif ++ } ++ } else { ++ if (0) ++ gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1"); + } + } +- else if (tp->port_id == 1) ++ else if (tp->port_id == 1 && netif_running(dev)) + { +- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS)) ++ if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS)) + { + if (status1 & GMAC1_HWTQ13_EOF_INT_BIT) + tp->hwtxq[3].eof_cnt++; +@@ -2629,14 +2645,14 @@ + tp->hwtxq[0].eof_cnt++; + } + +- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) ++ if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) + { + if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev))) +- { +- unsigned int data32; ++ { ++ unsigned int data32; + + if (rx_poll_enabled) +- gmac_registers("check #2"); ++ gmac_registers("check #2"); + + BUG_ON(rx_poll_enabled == 1); + +@@ -2646,7 +2662,7 @@ + data32 &= ~(DEFAULT_Q1_INT_BIT); + writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + +- /* Masks GMAC-1 queue empty interrupt */ ++ /* Masks GMAC-1 queue empty interrupt */ + data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); + data32 &= ~DEFAULT_Q1_INT_BIT; + writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); +@@ -2656,24 +2672,21 @@ + writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); + #endif + +- // disable GMAC-0 rx interrupt +- // class-Q & TOE-Q are implemented in future +- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- //data32 &= ~DEFAULT_Q1_INT_BIT; ++ // disable GMAC-0 rx interrupt ++ // class-Q & TOE-Q are implemented in future ++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ //data32 &= ~DEFAULT_Q1_INT_BIT; + //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__); + writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); + //tp->total_q_cnt_napi=0; + //rx_time = jiffies; + //rx_old_bytes = isPtr->rx_bytes; +- __netif_rx_schedule(dev); +- rx_poll_enabled = 1; +- } ++ __netif_rx_schedule(dev); ++ rx_poll_enabled = 1; ++ } + } + } +- } else { +- +- gmac_registers("check #3"); + } + + // Interrupt Status 0 +@@ -2814,676 +2827,93 @@ + } + } + +- //toe_gmac_enable_interrupt(tp->irq); +-#ifdef IxscriptMate_1518 +- if (storlink_ctl.pauseoff == 1) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +-#endif +-// enable_irq(gmac_irq[dev_index]); +- //printk("gmac_interrupt complete!\n\n"); +-// return IRQ_RETVAL(handled); + return IRQ_RETVAL(1); + } +-else +-{ +-#endif //endif NAPI + ++/*---------------------------------------------------------------------- ++* gmac_get_phy_vendor ++*----------------------------------------------------------------------*/ ++static unsigned int gmac_get_phy_vendor(int phy_addr) ++{ ++ unsigned int reg_val; ++ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03); ++ return reg_val; ++} + +- /* disable GMAC interrupt */ +- toe_gmac_disable_interrupt(tp->irq); ++/*---------------------------------------------------------------------- ++* gmac_set_phy_status ++*----------------------------------------------------------------------*/ ++void gmac_set_phy_status(struct net_device *dev) ++{ ++ GMAC_INFO_T *tp = dev->priv; ++ GMAC_STATUS_T status; ++ unsigned int reg_val, ability,wan_port_id; ++ unsigned int i = 0; + +-// isPtr->interrupts++; +- /* read Interrupt status */ +- status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG); +- status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); +- status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG); +- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG); +- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); +- // prompt warning if status bit ON but not enabled ++#ifdef VITESSE_G5SWITCH ++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){ + #if 0 +- if (status0 & ~tp->intr0_enabled) +- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n", +- status0, tp->intr0_enabled); +- if (status1 & ~tp->intr1_enabled) +- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n", +- status1, tp->intr1_enabled); +- if (status2 & ~tp->intr2_enabled) +- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n", +- status2, tp->intr2_enabled); +- if (status3 & ~tp->intr3_enabled) +- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n", +- status3, tp->intr3_enabled); +- if (status4 & ~tp->intr4_enabled) +- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n", +- status4, tp->intr4_enabled); +-#endif +-#define INTERRUPT_SELECT 1 +- if (status0) +- writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG); +- if (status1) +- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG); +- if (status2) +- writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG); +- if (status3) +- writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG); +- if (status4) +- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); +- +- /* handle freeq interrupt first */ +- if (status4 & tp->intr4_enabled) { +- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) +- { +- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, +- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); +- +- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, +- // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); +- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev)) +- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]); +- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev)) +- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]); +- printk("\nfreeq int\n"); +- toe_gmac_fill_free_q(); +- tp->sw_fq_empty_cnt++; +- +- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, +- SWFQ_EMPTY_INT_BIT); +- } +- } +- +- // Interrupt Status 1 +- if (status1 & tp->intr1_enabled) +- { +- #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT) +- #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT) +- // Handle GMAC 0/1 HW Tx queue 0-3 EOF events +- // Only count +- // TOE, Classification, and default queues interrupts are handled by ISR +- // because they should pass packets to upper layer +- if (tp->port_id == 0) +- { +-#ifndef INTERRUPT_SELECT +- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) +- { +- if (status1 & GMAC0_HWTQ03_EOF_INT_BIT) +- tp->hwtxq[3].eof_cnt++; +- if (status1 & GMAC0_HWTQ02_EOF_INT_BIT) +- tp->hwtxq[2].eof_cnt++; +- if (status1 & GMAC0_HWTQ01_EOF_INT_BIT) +- tp->hwtxq[1].eof_cnt++; +- if (status1 & GMAC0_HWTQ00_EOF_INT_BIT) +- tp->hwtxq[0].eof_cnt++; +-#endif //INTERRUPT_SELECT +-#ifndef INTERRUPT_SELECT +- } +-#endif //INTERRUPT_SELECT +- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT)) +- { +- tp->default_q_intr_cnt++; +- toe_gmac_handle_default_rxq(dev, tp); ++ rcv_mask = SPI_read(2,0,0x10); // Receive mask ++ rcv_mask |= 0x4F; ++ for(i=0;i<4;i++){ ++ reg_val = BIT(26)|(i<<21)|(10<<16); ++ SPI_write(3,0,1,reg_val); ++ msleep(10); ++ reg_val = SPI_read(3,0,2); ++ if(reg_val & 0x0c00){ ++ printk("Port%d:Giga mode\n",i); ++ SPI_write(1,i,0x00,0x300701B1); ++ SPI_write(1,i,0x00,0x10070181); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_1000; + } +-#ifdef CONFIG_SL351x_RXTOE +- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) && +- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) { +- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected); +- toe_gmac_handle_toeq(dev, tp, status1); +- //toe_gmac_handle_toeq(dev, toe, tp, status1); ++ else{ ++ reg_val = BIT(26)|(i<<21)|(5<<16); ++ SPI_write(3,0,1,reg_val); ++ msleep(10); ++ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5; ++ if ((ability & 0x0C)) /* 100M full duplex */ ++ { ++ SPI_write(1,i,0x00,0x30050472); ++ SPI_write(1,i,0x00,0x10050442); ++ printk("Port%d:100M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_100; ++ } ++ else if((ability & 0x03)) /* 10M full duplex */ ++ { ++ SPI_write(1,i,0x00,0x30050473); ++ SPI_write(1,i,0x00,0x10050443); ++ printk("Port%d:10M\n",i); ++ switch_pre_link[i]=LINK_UP; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ } ++ else{ ++ SPI_write(1,i,0x00,BIT(16)); // disable RX ++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet ++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty ++ msleep(1); ++ ++ SPI_write(1,i,0x00,0x20000030); // PORT_RST ++ switch_pre_link[i]=LINK_DOWN; ++ switch_pre_speed[i]=GMAC_SPEED_10; ++ rcv_mask &= ~BIT(i); ++ SPI_write(2,0,0x10,rcv_mask); // Disable Receive ++ } + } +-#endif + } +- else if (tp->port_id == 1) +- { +-#ifndef INTERRUPT_SELECT +- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS)) +- { +- if (status1 & GMAC1_HWTQ13_EOF_INT_BIT) +- tp->hwtxq[3].eof_cnt++; +- if (status1 & GMAC1_HWTQ12_EOF_INT_BIT) +- tp->hwtxq[2].eof_cnt++; +- if (status1 & GMAC1_HWTQ11_EOF_INT_BIT) +- tp->hwtxq[1].eof_cnt++; +- if (status1 & GMAC1_HWTQ10_EOF_INT_BIT) +- tp->hwtxq[0].eof_cnt++; +-#endif //INTERRUPT_SELECT +-#ifndef INTERRUPT_SELECT +- } +-#endif //INTERRUPT_SELECT +- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT)) +- { +- tp->default_q_intr_cnt++; +- toe_gmac_handle_default_rxq(dev, tp); +- } +-#ifdef CONFIG_SL351x_RXTOE +- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) && +- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) { +- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected); +- toe_gmac_handle_toeq(dev, tp, status1); +- //toe_gmac_handle_toeq(dev, toe, tp, status1); +- } + #endif +- } ++ gmac_get_switch_status(dev); ++ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f); ++// SPI_write(2,0,0x10,rcv_mask); // Enable Receive ++ return ; + } ++#endif + ++ reg_val = gmac_get_phy_vendor(tp->phy_addr); ++ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val); + +- // Interrupt Status 0 +- if (status0 & tp->intr0_enabled) +- { +- +- #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \ +- GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \ +- GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \ +- GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT) +-#ifndef INTERRUPT_SELECT +- if (status0 & ERR_INTR_BITS) +- { +- if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT)) +- { +- tp->txDerr_cnt[0]++; +- printk("GMAC0 TX AHB Bus Error!\n"); +- } +- if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT)) +- { +- tp->txPerr_cnt[0]++; +- printk("GMAC0 Tx Descriptor Protocol Error!\n"); +- } +- if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT)) +- { +- tp->txDerr_cnt[1]++; +- printk("GMAC1 Tx AHB Bus Error!\n"); +- } +- if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT)) +- { +- tp->txPerr_cnt[1]++; +- printk("GMAC1 Tx Descriptor Protocol Error!\n"); +- } +- +- if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT)) +- { +- tp->RxDerr_cnt[0]++; +- printk("GMAC0 Rx AHB Bus Error!\n"); +- } +- if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT)) +- { +- tp->RxPerr_cnt[0]++; +- printk("GMAC0 Rx Descriptor Protocol Error!\n"); +- } +- if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT)) +- { +- tp->RxDerr_cnt[1]++; +- printk("GMAC1 Rx AHB Bus Error!\n"); +- } +- if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT)) +- { +- tp->RxPerr_cnt[1]++; +- printk("GMAC1 Rx Descriptor Protocol Error!\n"); +- } +- } +-#endif //INTERRUPT_SELECT +-#ifndef GMAX_TX_INTR_DISABLED +- if (tp->port_id == 1 && netif_running(dev) && +- (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT)) +- || +- ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT)))) +- { +- toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1); +- } +- +- if (tp->port_id == 0 && netif_running(dev) && +- (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT)) +- || +- ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT)))) +- { +- toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1); +- } +-#endif +- // clear enabled status bits +- } +- // Interrupt Status 4 +-#ifndef INTERRUPT_SELECT +- if (status4 & tp->intr4_enabled) +- { +- #define G1_INTR4_BITS (0xff000000) +- #define G0_INTR4_BITS (0x00ff0000) +- +- if (tp->port_id == 0) +- { +- if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS)) +- { +- if (status4 & GMAC0_RESERVED_INT_BIT) +- printk("GMAC0_RESERVED_INT_BIT is ON\n"); +- if (status4 & GMAC0_MIB_INT_BIT) +- tp->mib_full_cnt++; +- if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT) +- tp->rx_pause_on_cnt++; +- if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT) +- tp->tx_pause_on_cnt++; +- if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT) +- tp->rx_pause_off_cnt++; +- if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT) +- tp->rx_pause_off_cnt++; +- if (status4 & GMAC0_RX_OVERRUN_INT_BIT) +- tp->rx_overrun_cnt++; +- if (status4 & GMAC0_STATUS_CHANGE_INT_BIT) +- tp->status_changed_cnt++; +- } +- } +- else if (tp->port_id == 1) +- { +- if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS)) +- { +- if (status4 & GMAC1_RESERVED_INT_BIT) +- printk("GMAC1_RESERVED_INT_BIT is ON\n"); +- if (status4 & GMAC1_MIB_INT_BIT) +- tp->mib_full_cnt++; +- if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT) +- { +- //printk("Gmac pause on\n"); +- tp->rx_pause_on_cnt++; +- } +- if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT) +- { +- //printk("Gmac pause on\n"); +- tp->tx_pause_on_cnt++; +- } +- if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT) +- { +- //printk("Gmac pause off\n"); +- tp->rx_pause_off_cnt++; +- } +- if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT) +- { +- //printk("Gmac pause off\n"); +- tp->rx_pause_off_cnt++; +- } +- if (status4 & GMAC1_RX_OVERRUN_INT_BIT) +- { +- //printk("Gmac Rx Overrun \n"); +- tp->rx_overrun_cnt++; +- } +- if (status4 & GMAC1_STATUS_CHANGE_INT_BIT) +- tp->status_changed_cnt++; +- } +- } +-#if 0 +- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT)) +- { +- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +-// mac_stop_rxdma(tp->sc); +- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG, +- tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); +- +- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, +- SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT); +- toe_gmac_fill_free_q(); +- tp->sw_fq_empty_cnt++; +- +- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, +- SWFQ_EMPTY_INT_BIT); +-//#if 0 +-/* if (netif_running(dev)) +- toe_gmac_handle_default_rxq(dev, tp); +- printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */ +-//#endif +- } +-#endif +- } +-#endif //INTERRUPT_SELECT +- toe_gmac_enable_interrupt(tp->irq); +-//enable gmac rx function when do RFC 2544 +-#ifdef IxscriptMate_1518 +- if (storlink_ctl.pauseoff == 1) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +-#endif +- //printk("gmac_interrupt complete!\n\n"); +-// return IRQ_RETVAL(handled); +- return IRQ_RETVAL(1); +-#ifdef CONFIG_SL_NAPI +-} +-#endif +-} +- +-/*---------------------------------------------------------------------- +-* toe_gmac_handle_default_rxq +-* (1) Get rx Buffer for default Rx queue +-* (2) notify or call upper-routine to handle it +-* (3) get a new buffer and insert it into SW free queue +-* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing +-*----------------------------------------------------------------------*/ +-//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp) +-static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp) +-{ +- TOE_INFO_T *toe; +- GMAC_RXDESC_T *curr_desc; +- struct sk_buff *skb; +- DMA_RWPTR_T rwptr; +- unsigned int pkt_size; +- int max_cnt; +- unsigned int desc_count; +- unsigned int good_frame, chksum_status, rx_status; +- struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; +- +-//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in. +-#ifdef IxscriptMate_1518 +- if (storlink_ctl.pauseoff == 1) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 1; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 1; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +-#endif +- rwptr.bits32 = readl(&tp->default_qhdr->word1); +-#if 0 +- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr) +- { +- mac_stop_txdma((struct net_device *)tp->dev); +- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n", +- rwptr.bits32, tp->rx_rwptr.bits.rptr); +- while(1); +- } +-#endif +- toe = (TOE_INFO_T *)&toe_private_data; +- max_cnt = DEFAULT_RXQ_MAX_CNT; +- while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr) +-// while (rwptr.bits.rptr != rwptr.bits.wptr) +- { +-//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround. +-#ifdef IxscriptMate_1518 +- if (storlink_ctl.pauseoff == 1) +- { +- if (pkt_size != 1514) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +- } +-#endif +- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; +-// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE); +- tp->default_q_cnt++; +- tp->rx_curr_desc = (unsigned int)curr_desc; +- rx_status = curr_desc->word0.bits.status; +- chksum_status = curr_desc->word0.bits.chksum_status; +- tp->rx_status_cnt[rx_status]++; +- tp->rx_chksum_cnt[chksum_status]++; +- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/ +- desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */ +- good_frame=1; +- if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr)) +- || (pkt_size < 60) +- || (chksum_status & 0x4) +- || rx_status) +- { +- good_frame = 0; +- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr) +- printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id); +- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr) +- printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id); +- if (rx_status) +- { +- if (rx_status == 4 || rx_status == 7) +- isPtr->rx_crc_errors++; +-// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id); +- } +-#ifdef SL351x_GMAC_WORKAROUND +- else if (pkt_size < 60) +- { +- if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD) +- tp->short_frames_cnt++; +- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 1; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 1; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +- } +-#endif +-// if (chksum_status) +-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); +- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); +- dev_kfree_skb_irq(skb); +- } +- if (good_frame) +- { +- if (curr_desc->word0.bits.drop) +- printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id); +-// if (chksum_status) +-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); +- +- /* get frame information from the first descriptor of the frame */ +-#ifdef SL351x_GMAC_WORKAROUND +- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) +- { +- GMAC_CONFIG0_T config0; +- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0); +- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0); +- config0.bits.dis_rx = 0; +- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0); +- } +- tp->short_frames_cnt = 0; +-#endif +- isPtr->rx_packets++; +- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES))); +- if (!skb) +- { +- printk("Fatal Error!!skb==NULL\n"); +- goto next_rx; +- } +- tp->curr_rx_skb = skb; +- // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE); +- +- // curr_desc->word2.buf_adr = 0; +- +- skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */ +- skb_put(skb, pkt_size); +- skb->dev = dev; +- if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK) +- { +- skb->ip_summed = CHECKSUM_UNNECESSARY; +-#ifdef CONFIG_SL351x_NAT +- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) +- { +- struct iphdr *ip_hdr; +- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +-#endif +- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ +-#if 0 +-#ifdef CONFIG_SL351x_RXTOE +- if (storlink_ctl.rx_max_pktsize) { +- struct iphdr *ip_hdr; +- struct tcphdr *tcp_hdr; +- int ip_hdrlen; +- +- ip_hdr = (struct iphdr*)&(skb->data[0]); +- if ((skb->protocol == __constant_htons(ETH_P_IP)) && +- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) { +- ip_hdrlen = ip_hdr->ihl << 2; +- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]); +- if (tcp_hdr->syn) { +- struct toe_conn* connection = init_toeq(ip_hdr->version, +- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14); +- TCP_SKB_CB(skb)->connection = connection; +- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index); +- // printk("%s::skb data %x, conn %x, mode %x\n", +- // __func__, skb->data, connection, connection->mode); +- } +- } +- } +-#endif +-#endif +- } +- else if (chksum_status == RX_CHKSUM_IP_OK_ONLY) +- { +- skb->ip_summed = CHECKSUM_UNNECESSARY; +-#ifdef CONFIG_SL351x_NAT +- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) +- { +- struct iphdr *ip_hdr; +- //struct tcphdr *tcp_hdr; +- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); +- //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]); +- if (ip_hdr->protocol == IPPROTO_UDP) +- { +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +- else if (ip_hdr->protocol == IPPROTO_GRE) +- { +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +- } +-#endif +- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ +- } +- else +- { +- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ +- } +- +- netif_rx(skb); /* socket rx */ +- dev->last_rx = jiffies; +- +- isPtr->rx_bytes += pkt_size; +- +- } +- +-next_rx: +- // advance one for Rx default Q 0/1 +- rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); +- SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); +- tp->rx_rwptr.bits32 = rwptr.bits32; +- +- } +- +- /* Handles first available packets only then refill the queue. */ +- toe_gmac_fill_free_q(); +-} +- +-/*---------------------------------------------------------------------- +-* gmac_get_phy_vendor +-*----------------------------------------------------------------------*/ +-static unsigned int gmac_get_phy_vendor(int phy_addr) +-{ +- unsigned int reg_val; +- reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03); +- return reg_val; +-} +- +-/*---------------------------------------------------------------------- +-* gmac_set_phy_status +-*----------------------------------------------------------------------*/ +-void gmac_set_phy_status(struct net_device *dev) +-{ +- GMAC_INFO_T *tp = dev->priv; +- GMAC_STATUS_T status; +- unsigned int reg_val, ability,wan_port_id; +- unsigned int i = 0; +- +-#ifdef VITESSE_G5SWITCH +- if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){ +-#if 0 +- rcv_mask = SPI_read(2,0,0x10); // Receive mask +- rcv_mask |= 0x4F; +- for(i=0;i<4;i++){ +- reg_val = BIT(26)|(i<<21)|(10<<16); +- SPI_write(3,0,1,reg_val); +- msleep(10); +- reg_val = SPI_read(3,0,2); +- if(reg_val & 0x0c00){ +- printk("Port%d:Giga mode\n",i); +- SPI_write(1,i,0x00,0x300701B1); +- SPI_write(1,i,0x00,0x10070181); +- switch_pre_link[i]=LINK_UP; +- switch_pre_speed[i]=GMAC_SPEED_1000; +- } +- else{ +- reg_val = BIT(26)|(i<<21)|(5<<16); +- SPI_write(3,0,1,reg_val); +- msleep(10); +- ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5; +- if ((ability & 0x0C)) /* 100M full duplex */ +- { +- SPI_write(1,i,0x00,0x30050472); +- SPI_write(1,i,0x00,0x10050442); +- printk("Port%d:100M\n",i); +- switch_pre_link[i]=LINK_UP; +- switch_pre_speed[i]=GMAC_SPEED_100; +- } +- else if((ability & 0x03)) /* 10M full duplex */ +- { +- SPI_write(1,i,0x00,0x30050473); +- SPI_write(1,i,0x00,0x10050443); +- printk("Port%d:10M\n",i); +- switch_pre_link[i]=LINK_UP; +- switch_pre_speed[i]=GMAC_SPEED_10; +- } +- else{ +- SPI_write(1,i,0x00,BIT(16)); // disable RX +- SPI_write(5,0,0x0E,BIT(i)); // dicard packet +- while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty +- msleep(1); +- +- SPI_write(1,i,0x00,0x20000030); // PORT_RST +- switch_pre_link[i]=LINK_DOWN; +- switch_pre_speed[i]=GMAC_SPEED_10; +- rcv_mask &= ~BIT(i); +- SPI_write(2,0,0x10,rcv_mask); // Disable Receive +- } +- } +- } +-#endif +- gmac_get_switch_status(dev); +- gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f); +-// SPI_write(2,0,0x10,rcv_mask); // Enable Receive +- return ; +- } +-#endif +- +- reg_val = gmac_get_phy_vendor(tp->phy_addr); +- printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val); +- +- switch (tp->phy_mode) ++ switch (tp->phy_mode) + { + case GMAC_PHY_GMII: + mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ +@@ -3552,6 +2982,7 @@ + status.bits.link = LINK_DOWN; + // clear_bit(__LINK_STATE_START, &dev->state); + printk("Link Down (0x%04x) ", reg_val); ++#ifdef VITESSE_G5SWITCH + if(Giga_switch == 1) + { + wan_port_id = 1; +@@ -3565,6 +2996,7 @@ + storlink_ctl.link[ tp->port_id] = 0; + #endif + } ++#endif + } + else + { +@@ -3572,6 +3004,7 @@ + status.bits.link = LINK_UP; + // set_bit(__LINK_STATE_START, &dev->state); + printk("Link Up (0x%04x) ",reg_val); ++#ifdef VITESSE_G5SWITCH + if(Giga_switch == 1) + { + wan_port_id = 1; +@@ -3585,6 +3018,7 @@ + storlink_ctl.link[ tp->port_id] = 1; + #endif + } ++#endif + } + // value = mii_read(PHY_ADDR,0x05); + +@@ -3863,6 +3297,7 @@ + } + } + status.bits.link = LINK_UP; /* link up */ ++#ifdef VITESSE_G5SWITCH + if(Giga_switch==1) + { + wan_port_id = 1; +@@ -3874,6 +3309,7 @@ + storlink_ctl.link[ tp->port_id] = 1; + #endif + } ++#endif + if ((ability & 0x20)==0x20) + { + if (tp->flow_control_enable == 0) +@@ -3914,6 +3350,7 @@ + else + { + status.bits.link = LINK_DOWN; /* link down */ ++#ifdef VITESSE_G5SWITCH + if(Giga_switch == 1) + { + wan_port_id = 1; +@@ -3925,6 +3362,7 @@ + storlink_ctl.link[ tp->port_id] = 0; + #endif + } ++#endif + if (tp->pre_phy_status == LINK_UP) + { + printk("GMAC-%d LINK_Down......\n",tp->port_id); +@@ -4298,86 +3736,102 @@ + } + + #ifdef CONFIG_SL_NAPI ++ ++static int gmax_rx(struct net_device *dev, int *budget) ++{ ++ return 0; ++} ++ ++static int gmac_tx(struct net_device *dev, int *budget) ++{ ++ return 0; ++} ++ + /*---------------------------------------------------------------------- + * gmac_rx_poll + *----------------------------------------------------------------------*/ + static int gmac_rx_poll(struct net_device *dev, int *budget) + { +- TOE_INFO_T *toe; +- GMAC_RXDESC_T *curr_desc; +- struct sk_buff *skb; +- DMA_RWPTR_T rwptr; +- unsigned int data32; +- unsigned int pkt_size; +- unsigned int desc_count; +- unsigned int good_frame, chksum_status, rx_status; +- int rx_pkts_num = 0; +- int quota = min(dev->quota, *budget); +- GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; +- unsigned int status4; +- volatile DMA_RWPTR_T fq_rwptr; +- // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64 +- //unsigned long rx_old_bytes; ++ TOE_INFO_T *toe; ++ GMAC_RXDESC_T *curr_desc; ++ struct sk_buff *skb; ++ DMA_RWPTR_T rwptr; ++ unsigned int data32; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int good_frame, chksum_status, rx_status; ++ int rx_pkts_num = 0; ++ int quota = min(dev->quota, *budget); ++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv; ++ unsigned int status1; ++ unsigned int status4; + struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics; +- //unsigned long long rx_time; +- + + BUG_ON(rx_poll_enabled == 0); +-#if 1 +- if (do_again) +- { +- toe_gmac_fill_free_q(); +- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); +- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32); +- if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr) +- { +- //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); +- do_again =0; +- //netif_rx_complete(dev); +- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1); +- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- rwptr.bits32 = readl(&tp->default_qhdr->word1); +- } +- else +- return 1; +- } +-#endif +- rwptr.bits32 = readl(&tp->default_qhdr->word1); +-#if 0 +- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr) +- { +- mac_stop_txdma((struct net_device *)tp->dev); +- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n", +- rwptr.bits32, tp->rx_rwptr.bits.rptr); +- while(1); +- } +-#endif ++ + toe = (TOE_INFO_T *)&toe_private_data; + +- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 ); +- //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); +-// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota)) ++rx_poll_retry: ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ if (status1 & 1) { ++ writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ } + ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); + while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota)) + { +- +- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; ++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr; + tp->default_q_cnt++; +- tp->rx_curr_desc = (unsigned int)curr_desc; +- rx_status = curr_desc->word0.bits.status; +- chksum_status = curr_desc->word0.bits.chksum_status; +- tp->rx_status_cnt[rx_status]++; +- tp->rx_chksum_cnt[chksum_status]++; +- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/ ++ tp->rx_curr_desc = (unsigned int)curr_desc; ++ rx_status = curr_desc->word0.bits.status; ++ chksum_status = curr_desc->word0.bits.chksum_status; ++ tp->rx_status_cnt[rx_status]++; ++ tp->rx_chksum_cnt[chksum_status]++; ++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/ + desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */ + good_frame=1; ++ ++ if (0) { ++ ++ int free, busy; ++ uint32_t rwptr1; ++ uint32_t rwptr2; ++ ++ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF; ++ ++ rwptr2 = readl(&tp->default_qhdr->word1); ++ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF; ++ ++ if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) { ++ printk("frame status: %d\n" ++ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n" ++ "GMAC: wptr: %hu, rptr: %hu, free: %d\n", ++ rx_status, ++ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free, ++ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy); ++ } ++ } ++ ++ { ++ GMAC_RXDESC_T *fq_desc; ++ void *data; ++ struct sk_buff *skb; ++ unsigned short idx; ++ ++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); ++ idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4)); ++ ++ BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM); ++ BUG_ON(skb == NULL); ++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx; ++ fq_desc->word2.buf_adr = 0; ++ } ++ + if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr)) +- || (pkt_size < 60) ++ || (pkt_size < 60) + || (chksum_status & 0x4) + || rx_status ) +-// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr )) + { + good_frame = 0; + if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr) +@@ -4388,7 +3842,6 @@ + { + if (rx_status == 4 || rx_status == 7) + isPtr->rx_crc_errors++; +-// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id); + } + #ifdef SL351x_GMAC_WORKAROUND + else if (pkt_size < 60) +@@ -4407,17 +3860,32 @@ + } + } + #endif +-// if (chksum_status) +-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); + skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); +- dev_kfree_skb_irq(skb); ++ dev_kfree_skb(skb); ++ ++ if (0) { ++ int free, busy; ++ uint32_t rwptr1; ++ uint32_t rwptr2; ++ ++ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); ++ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF; ++ ++ rwptr2 = readl(&tp->default_qhdr->word1); ++ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF; ++ ++ printk("frame status: %d\n" ++ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n" ++ "GMAC: wptr: %hu, rptr: %hu, free: %d\n", ++ rx_status, ++ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free, ++ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy); ++ } + } + if (good_frame) + { + if (curr_desc->word0.bits.drop) + printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id); +-// if (chksum_status) +-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id); + + #ifdef SL351x_GMAC_WORKAROUND + if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD) +@@ -4432,225 +3900,118 @@ + } + tp->short_frames_cnt = 0; + #endif +- /* get frame information from the first descriptor of the frame */ ++ /* get frame information from the first descriptor of the frame */ + isPtr->rx_packets++; +- //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE); ++ consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE); + skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES)); + tp->curr_rx_skb = skb; +- // curr_desc->word2.buf_adr = 0; + +- //skb_reserve (skb, SKB_RESERVE_BYTES); + skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */ +- //if ((skb->tail+pkt_size) > skb->end ) +- //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end); + skb_put(skb, pkt_size); + +- + skb->dev = dev; + if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK) + { + skb->ip_summed = CHECKSUM_UNNECESSARY; +-#ifdef CONFIG_SL351x_NAT +- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) +- { +- struct iphdr *ip_hdr; +- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +-#endif + skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ +-#if 0 +-#ifdef CONFIG_SL351x_RXTOE +- if (storlink_ctl.rx_max_pktsize) { +- struct iphdr *ip_hdr; +- struct tcphdr *tcp_hdr; +- int ip_hdrlen; +- +- ip_hdr = (struct iphdr*)&(skb->data[0]); +- if ((skb->protocol == __constant_htons(ETH_P_IP)) && +- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) { +- ip_hdrlen = ip_hdr->ihl << 2; +- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]); +- if (tcp_hdr->syn) { +- struct toe_conn* connection = init_toeq(ip_hdr->version, +- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14); +- TCP_SKB_CB(skb)->connection = connection; +- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index); +- // printk("%s::skb data %x, conn %x, mode %x\n", +- // __func__, skb->data, connection, connection->mode); +- } +- } +- } +-#endif +-#endif + } + else if (chksum_status == RX_CHKSUM_IP_OK_ONLY) + { + skb->ip_summed = CHECKSUM_UNNECESSARY; +-#ifdef CONFIG_SL351x_NAT +- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset) +- { +- struct iphdr *ip_hdr; +- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]); +- if (ip_hdr->protocol == IPPROTO_UDP) +- { +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +- else if (ip_hdr->protocol == IPPROTO_GRE) +- { +- sl351x_nat_input(skb, +- tp->port_id, +- (void *)curr_desc->word3.bits.l3_offset, +- (void *)curr_desc->word3.bits.l4_offset); +- } +- } +-#endif + skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ + } + else + { + skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */ + } +- //netif_rx(skb); /* socket rx */ ++ + netif_receive_skb(skb); //For NAPI + dev->last_rx = jiffies; + + isPtr->rx_bytes += pkt_size; +- //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes); +- ++ } + +- } + // advance one for Rx default Q 0/1 + rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); + SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); +- tp->rx_rwptr.bits32 = rwptr.bits32; ++ tp->rx_rwptr.bits32 = rwptr.bits32; + rx_pkts_num++; +- //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again +- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 ); +-#if 0 +- if ((status4 & 0x1) == 0) +- { +- //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 )))) +- if (tp->total_q_cnt_napi < 1024) +- { +- tp->total_q_cnt_napi++; +- toe_gmac_fill_free_q(); //for iperf test disable +- } +- //else +- //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes ); ++ // rwptr.bits32 = readl(&tp->default_qhdr->word1); + ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ if (status4 & 1) { ++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); + } ++ ++ toe_gmac_fill_free_q(5); ++ } ++ ++#if 0 ++ /* avoid races with hard_start_xmit() */ ++ ++ spin_lock(&gmac_fq_lock); ++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1); ++ spin_unlock(&gmac_fq_lock); + #endif +- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); +- //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 ); +- //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); ++ ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ if (status4 & 1) ++ { ++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG); ++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG); ++ toe_gmac_fill_free_q(rx_pkts_num); + } +- // advance one for Rx default Q 0/1 + +- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num); +- //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr); +- //tp->rx_rwptr.bits32 = rwptr.bits32; +- //rwptr.bits.rptr = rwptr.bits.rptr; ++ rwptr.bits32 = readl(&tp->default_qhdr->word1); ++ if (rwptr.bits.rptr != rwptr.bits.wptr && ++ quota > rx_pkts_num) ++ goto rx_poll_retry; + + dev->quota -= rx_pkts_num; + *budget -= rx_pkts_num; + +- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again +- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG); +- rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again +- //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); +-// if (rwptr.bits.rptr > rwptr.bits.wptr ) +-// { +- //toe_gmac_disable_rx(dev); +- //wait_event_interruptible_timeout(freeq_wait, +- //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT); +- //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n", +- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); +-// return 1; +-// } +- +- if (rwptr.bits.rptr == rwptr.bits.wptr) ++ /* Receive queue is empty now */ ++ if (quota >= rx_pkts_num) + { +- // unsigned int data32; +- //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 ); +- +- /* Receive descriptor is empty now */ +-#if 1 +- if (status4 & 0x1) +- { +- do_again =1; +- //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt +- //toe_gmac_disable_interrupt(tp->irq); +- tp->sw_fq_empty_cnt++; +- //toe_gmac_disable_rx(dev); +- writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0); +- writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0); +- //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt); +- //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256))) +- //{ +- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, +- //0x1); +- //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32); +- //if ((status4 & 0x1) == 0) +- //break; +- return 1; +- //} ++ unsigned long flags; + ++ netif_rx_complete(dev); ++ rx_poll_enabled = 0; ++#if 0 ++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG); ++ if (status1 & 1) { ++ if (netif_rx_reschedule(dev, rx_pkts_num)) { ++ rx_poll_enabled = 1; ++ return 1; + } ++ } + #endif +- //toe_gmac_fill_free_q(); +- netif_rx_complete(dev); +- +- rx_poll_enabled = 0; + +- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- if (tp->port_id == 0) +- data32 |= DEFAULT_Q0_INT_BIT; +- else +- data32 |= DEFAULT_Q1_INT_BIT; +- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); ++ spin_lock_irqsave(&gmac_fq_lock, flags); + + data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); + if (tp->port_id == 0) +- data32 |= DEFAULT_Q0_INT_BIT; ++ data32 |= DEFAULT_Q0_INT_BIT; + else +- data32 |= DEFAULT_Q1_INT_BIT; ++ data32 |= DEFAULT_Q1_INT_BIT; + writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG); + +- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + if (tp->port_id == 0) +- data32 |= DEFAULT_Q0_INT_BIT; ++ data32 |= DEFAULT_Q0_INT_BIT; + else +- data32 |= DEFAULT_Q1_INT_BIT; +- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG); ++ data32 |= DEFAULT_Q1_INT_BIT; ++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); + +- // enable GMAC-0 rx interrupt +- // class-Q & TOE-Q are implemented in future +- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- //if (tp->port_id == 0) +- //data32 |= DEFAULT_Q0_INT_BIT; +- //else +- //data32 |= DEFAULT_Q1_INT_BIT; +- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG); +- writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG); +- //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n", +- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); +- writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0); +- writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0); +- return 0; +- } +- else +- { +- //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr); +- return 1; +- } ++ spin_unlock_irqrestore(&gmac_fq_lock, flags); ++ ++ return 0; ++ } ++ else ++ { ++ /* not done, will call ->poll() later. */ ++ return 1; ++ } + } + #endif + +@@ -5114,6 +4475,7 @@ + { + sl351x_nat_workaround_cnt++; + sl351x_nat_workaround_handler(); ++ printk("%():%d - workaround\n", __func__, __LINE__); + } + #endif + #endif +@@ -5124,6 +4486,7 @@ + } + + do_workaround: ++ printk("doing workaround ?!\n"); + + gmac_initialized = 0; + if (hanged_state) +@@ -5290,6 +4653,7 @@ + GMAC_SWTXQ_T *swtxq; + DMA_RWPTR_T rwptr; + ++ printk("**** %s():%d\n", __func__, __LINE__); + toe = (TOE_INFO_T *)&toe_private_data; + tp = (GMAC_INFO_T *)&toe->gmac[0]; + for (i=0; i<GMAC_NUM; i++, tp++) +@@ -5341,6 +4705,7 @@ + volatile GMAC_RXDESC_T *curr_desc; + struct sk_buff *skb; + ++ printk("**** %s():%d\n", __func__, __LINE__); + toe = (TOE_INFO_T *)&toe_private_data; + tp = (GMAC_INFO_T *)&toe->gmac[0]; + for (i=0; i<GMAC_NUM; i++, tp++) +@@ -5374,6 +4739,7 @@ + volatile GMAC_RXDESC_T *curr_desc; + struct sk_buff *skb; + ++ printk("**** %s():%d\n", __func__, __LINE__); + toe = (TOE_INFO_T *)&toe_private_data; + classq = (CLASSQ_INFO_T *)&toe->classq[0]; + for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++) +@@ -5410,6 +4776,7 @@ + GMAC_RXDESC_T *toe_curr_desc; + struct sk_buff *skb; + ++ printk("**** %s():%d\n", __func__, __LINE__); + toe = (TOE_INFO_T *)&toe_private_data; + toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE; + for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++) +Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h +=================================================================== +--- linux-2.6.23.16.orig/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 17:00:21.364762892 +0200 ++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 17:01:08.367441241 +0200 +@@ -107,7 +107,7 @@ + * The base address and descriptor number are configured at + * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004) + **********************************************************************/ +-#define TOE_SW_FREEQ_DESC_POWER 10 ++#define TOE_SW_FREEQ_DESC_POWER 8 + #define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER) + #define TOE_HW_FREEQ_DESC_POWER 8 + #define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER) +@@ -123,12 +123,12 @@ + #define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER) + #define TOE_DEFAULT_Q1_DESC_POWER 8 + #define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER) +-#define TOE_TOE_DESC_POWER 8 +-#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER) ++#define TOE_TOE_DESC_POWER 8 ++#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER) + #define TOE_CLASS_DESC_POWER 8 +-#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER) +-#define TOE_INTR_DESC_POWER 8 +-#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER) ++#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER) ++#define TOE_INTR_DESC_POWER 8 ++#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER) + + #define TOE_TOE_QUEUE_MAX 64 + #define TOE_TOE_QUEUE_NUM 64 diff --git a/target/linux/storm/patches/1020-mtd.patch b/target/linux/storm/patches/1020-mtd.patch new file mode 100644 index 0000000000..7d5d7bc312 --- /dev/null +++ b/target/linux/storm/patches/1020-mtd.patch @@ -0,0 +1,4981 @@ +Index: linux-2.6.23.16/drivers/mtd/chips/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/chips/Kconfig 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/chips/Kconfig 2008-03-15 17:03:17.874821522 +0200 +@@ -220,6 +220,13 @@ + This option enables basic support for ROM chips accessed through + a bus mapping driver. + ++config MTD_SERIAL ++ tristate "Support for Serial chips in bus mapping" ++ depends on MTD ++ help ++ This option enables basic support for Serial chips accessed through ++ a bus mapping driver. ++ + config MTD_ABSENT + tristate "Support for absent chips in bus mapping" + help +Index: linux-2.6.23.16/drivers/mtd/chips/cfi_cmdset_0002.c +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/chips/cfi_cmdset_0002.c 2008-03-15 17:03:17.874821522 +0200 +@@ -39,10 +39,15 @@ + #include <linux/mtd/cfi.h> + #include <linux/mtd/xip.h> + ++//****** Storlink SoC ****** + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 +- +-#define MAX_WORD_RETRIES 3 ++//#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 ++#define FORCE_FAST_PROG 0 ++ ++//#define MAX_WORD_RETRIES 3 ++#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY ++//************************** + + #define MANUFACTURER_AMD 0x0001 + #define MANUFACTURER_ATMEL 0x001F +@@ -322,6 +327,13 @@ + #endif + + bootloc = extp->TopBottom; ++//****** Storlink SoC ****** ++ if(bootloc == 5) ++ { ++ bootloc = 3; ++ extp->TopBottom = 3; ++ } ++//************************** + if ((bootloc != 2) && (bootloc != 3)) { + printk(KERN_WARNING "%s: CFI does not contain boot " + "bank location. Assuming top.\n", map->name); +@@ -340,6 +352,9 @@ + cfi->cfiq->EraseRegionInfo[j] = swap; + } + } ++#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 ++ cfi->device_type = CFI_DEVICETYPE_X8; ++#endif + /* Set the default CFI lock/unlock addresses */ + cfi->addr_unlock1 = 0x555; + cfi->addr_unlock2 = 0x2aa; +@@ -461,6 +476,7 @@ + map_word d, t; + + d = map_read(map, addr); ++ udelay(20); //Storlink SoC + t = map_read(map, addr); + + return map_word_equal(map, d, t); +@@ -626,7 +642,9 @@ + default: + printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate); + } ++//****** Storlink SoC ****** + wake_up(&chip->wq); ++//************************** + } + + #ifdef CONFIG_MTD_XIP +@@ -940,7 +958,9 @@ + cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + ++//****** Storlink SoC ****** + wake_up(&chip->wq); ++//************************** + spin_unlock(chip->mutex); + + return 0; +@@ -1005,7 +1025,10 @@ + */ + unsigned long uWriteTimeout = ( HZ / 1000 ) + 1; + int ret = 0; +- map_word oldd; ++//****** Storlink SoC ****** ++// map_word oldd; ++ map_word oldd, tmp; ++//************************** + int retry_cnt = 0; + + adr += chip->start; +@@ -1037,9 +1060,15 @@ + ENABLE_VPP(map); + xip_disable(map, chip, adr); + retry: ++//****** Storlink SoC ****** ++#if FORCE_FAST_PROG /* Unlock bypass */ ++ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); ++#else + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); ++#endif ++//************************** + map_write(map, datum, adr); + chip->state = FL_WRITING; + +@@ -1072,7 +1101,13 @@ + } + + if (chip_ready(map, adr)) +- break; ++ { ++ tmp = map_read(map, adr); ++ if(map_word_equal(map, tmp, datum)) ++// goto op_done; ++ break; ++ ++ } + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1084,8 +1119,17 @@ + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_WORD_RETRIES) ++ { ++//****** Storlink SoC ****** ++#if FORCE_FAST_PROG ++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); ++ //udelay(1); ++#endif ++ udelay(1); + goto retry; +- ++ } + ret = -EIO; + } + xip_enable(map, chip, adr); +@@ -1171,7 +1215,14 @@ + return 0; + } + } +- ++//****** Storlink SoC ****** ++ map_write( map, CMD(0xF0), chipstart ); ++#if FORCE_FAST_PROG ++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++#endif ++//************************** + /* We are now aligned, write as much as possible */ + while(len >= map_bankwidth(map)) { + map_word datum; +@@ -1181,7 +1232,15 @@ + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum); + if (ret) ++ { ++//****** Storlink SoC ****** ++#if FORCE_FAST_PROG ++ /* Get out of unlock bypass mode */ ++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + return ret; ++ } + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); +@@ -1189,19 +1248,38 @@ + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { ++//****** Storlink SoC ****** ++#if FORCE_FAST_PROG ++ /* Get out of unlock bypass mode */ ++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + chipstart = cfi->chips[chipnum].start; ++#if FORCE_FAST_PROG ++ /* Go into unlock bypass mode for next set of chips */ ++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + } + } + ++#if FORCE_FAST_PROG ++ /* Get out of unlock bypass mode */ ++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL); ++#endif ++ + /* Write the trailing bytes if any */ + if (len & (map_bankwidth(map)-1)) { + map_word tmp_buf; + + retry1: ++ + spin_lock(cfi->chips[chipnum].mutex); + + if (cfi->chips[chipnum].state != FL_READY) { +@@ -1221,7 +1299,11 @@ + #endif + goto retry1; + } +- ++#if FORCE_FAST_PROG ++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + tmp_buf = map_read(map, ofs + chipstart); + + spin_unlock(cfi->chips[chipnum].mutex); +@@ -1231,11 +1313,23 @@ + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, tmp_buf); + if (ret) ++ { ++#if FORCE_FAST_PROG ++ /* Get out of unlock bypass mode */ ++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + return ret; +- ++ } ++#if FORCE_FAST_PROG ++ /* Get out of unlock bypass mode */ ++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL); ++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL); ++#endif + (*retlen) += len; + } + ++ map_write( map, CMD(0xF0), chipstart ); + return 0; + } + +@@ -1275,6 +1369,7 @@ + ENABLE_VPP(map); + xip_disable(map, chip, cmd_adr); + ++ map_write( map, CMD(0xF0), chip->start ); //Storlink + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); +@@ -1535,6 +1630,9 @@ + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_lock(); // sl2312 share pin lock ++#endif + adr += chip->start; + + spin_lock(chip->mutex); +@@ -1613,6 +1711,9 @@ + chip->state = FL_READY; + put_chip(map, chip, adr); + spin_unlock(chip->mutex); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return ret; + } + +Index: linux-2.6.23.16/drivers/mtd/chips/map_serial.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/chips/map_serial.c 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,188 @@ ++/* ++ * Common code to handle map devices which are simple ROM ++ * (C) 2000 Red Hat. GPL'd. ++ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $ ++ */ ++ ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <asm/io.h> ++ ++#include <asm/byteorder.h> ++#include <linux/errno.h> ++#include <linux/slab.h> ++ ++#include <asm/hardware.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/mtd.h> ++#include <linux/init.h> //add ++#include <asm/arch/sl2312.h> ++#include <asm/arch/flash.h> ++ ++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr); ++static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); ++static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++static void mapserial_nop (struct mtd_info *); ++struct mtd_info *map_serial_probe(struct map_info *map); ++ ++extern int m25p80_sector_erase(__u32 address, __u32 schip_en); ++ ++static struct mtd_chip_driver mapserial_chipdrv = { ++ probe: map_serial_probe, ++ name: "map_serial", ++ module: THIS_MODULE ++}; ++ ++struct mtd_info *map_serial_probe(struct map_info *map) ++{ ++ struct mtd_info *mtd; ++ ++ mtd = kmalloc(sizeof(*mtd), GFP_KERNEL); ++ if (!mtd) ++ return NULL; ++ ++ memset(mtd, 0, sizeof(*mtd)); ++ ++ map->fldrv = &mapserial_chipdrv; ++ mtd->priv = map; ++ mtd->name = map->name; ++ mtd->type = MTD_OTHER; ++ mtd->erase = mapserial_erase; ++ mtd->size = map->size; ++ mtd->read = mapserial_read; ++ mtd->write = mapserial_write; ++ mtd->sync = mapserial_nop; ++ mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE); ++// mtd->erasesize = 512; // page size; ++#ifdef CONFIG_MTD_SL2312_SERIAL_ST ++ mtd->erasesize = M25P80_SECTOR_SIZE; // block size; ++#else ++ mtd->erasesize = 0x1000; // block size; ++#endif ++ ++ __module_get(THIS_MODULE); ++ //MOD_INC_USE_COUNT; ++ return mtd; ++} ++ ++#define FLASH_ACCESS_OFFSET 0x00000010 ++#define FLASH_ADDRESS_OFFSET 0x00000014 ++#define FLASH_WRITE_DATA_OFFSET 0x00000018 ++#define FLASH_READ_DATA_OFFSET 0x00000018 ++ ++static __u32 readflash_ctrl_reg(__u32 ofs) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ return __raw_readl(base); ++} ++ ++static void writeflash_ctrl_reg(__u32 data, __u32 ofs) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ __raw_writel(data, base); ++} ++ ++static int mapserial_erase_block(struct map_info *map,unsigned int block) ++{ ++ ++ __u32 address; ++#ifdef CONFIG_MTD_SL2312_SERIAL_ST ++ ++ if(!m25p80_sector_erase(block, 0)) ++ return (MTD_ERASE_DONE); ++#else ++ __u32 opcode; ++ __u32 count=0; ++// __u8 status; ++ ++ // printk("mapserial_erase_block : erase block %d \n",block); ++// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd; ++ opcode = 0x80000000 | 0x0200 | 0x50; ++ address = (block << 13); ++ writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET); ++ writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET); ++ opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ count++; ++ if (count > 10000) ++ { ++ return (MTD_ERASE_FAILED); ++ } ++ } ++ return (MTD_ERASE_DONE); ++#endif ++} ++ ++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct map_info *map = (struct map_info *)mtd->priv; ++ unsigned int addr; ++ int len; ++ unsigned int block; ++ unsigned int ret=0; ++ ++ addr = instr->addr; ++ len = instr->len; ++ while (len > 0) ++ { ++ block = addr / mtd->erasesize; ++#ifdef CONFIG_MTD_SL2312_SERIAL_ST ++ ret = mapserial_erase_block(map,addr); ++#else ++ ret = mapserial_erase_block(map,block); ++#endif ++ addr = addr + mtd->erasesize; ++ len = len - mtd->erasesize; ++ } ++ return (ret); ++} ++ ++static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) ++{ ++ struct map_info *map = (struct map_info *)mtd->priv; ++// printk("mapserial_read : \n"); ++ map->copy_from(map, buf, from, len); ++ *retlen = len; ++ return 0; ++} ++ ++static void mapserial_nop(struct mtd_info *mtd) ++{ ++ /* Nothing to see here */ ++} ++ ++static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) ++{ ++ struct map_info *map = (struct map_info *)mtd->priv; ++// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len); ++ //map->copy_to(map, buf, to, len); ++ map->copy_to(map, to, buf, len); ++ *retlen = len; ++ return 0; ++} ++ ++int __init map_serial_init(void) ++{ ++ register_mtd_chip_driver(&mapserial_chipdrv); ++ return 0; ++} ++ ++static void __exit map_serial_exit(void) ++{ ++ unregister_mtd_chip_driver(&mapserial_chipdrv); ++} ++ ++module_init(map_serial_init); ++module_exit(map_serial_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); ++MODULE_DESCRIPTION("MTD chip driver for ROM chips"); +Index: linux-2.6.23.16/drivers/mtd/maps/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/maps/Kconfig 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/maps/Kconfig 2008-03-15 17:03:17.874821522 +0200 +@@ -614,5 +614,30 @@ + + This selection automatically selects the map_ram driver. + ++#*************************************************************************************** ++# Storlink parallel/Serial Flash configuration ++#*************************************************************************************** ++config MTD_SL2312_CFI ++ tristate "CFI Flash device mapped on SL2312" ++ depends on MTD_CFI ++ help ++ Map driver for SL2312 demo board. ++ ++config MTD_SL2312_SERIAL_ATMEL ++ tristate "ATMEL Serial Flash device mapped on SL2312" ++ depends on MTD_PARTITIONS && ARCH_SL2312 ++ help ++ Map driver for SL2312 demo board. ++ ++config MTD_SL2312_SERIAL_ST ++ tristate "ST Serial Flash device mapped on SL2312" ++ depends on MTD_PARTITIONS && ARCH_SL2312 ++ help ++ Map driver for SL2312 demo board. ++ ++config SL2312_SHARE_PIN ++ tristate "Parallel Flash share pin on SL2312 ASIC" ++ depends on SL3516_ASIC ++ + endmenu + +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-atmel.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-atmel.c 2008-03-15 17:04:02.877385981 +0200 +@@ -0,0 +1,554 @@ ++/* ++ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $ ++ * ++ * Flash and EPROM on Hitachi Solution Engine and similar boards. ++ * ++ * (C) 2001 Red Hat, Inc. ++ * ++ * GPL'd ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++ ++#include <asm/io.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/partitions.h> ++#include <asm/hardware.h> ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/flash.h> ++#include <linux/init.h> //add ++ ++ ++#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11 ++#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel ++ ++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); ++ ++void address_to_page(__u32 address, __u16 *page, __u16 *offset) ++{ ++ *page = address / SPAGE_SIZE; ++ *offset = address % SPAGE_SIZE; ++} ++ ++static __u32 read_flash_ctrl_reg(__u32 ofs) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ return __raw_readl(base); ++} ++ ++static void write_flash_ctrl_reg(__u32 ofs,__u32 data) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ __raw_writel(data, base); ++} ++ ++void atmel_read_status(__u8 cmd, __u8 *data) ++{ ++ __u32 opcode; ++ __u32 value; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen; ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ *data = value & 0xff; ++} ++ ++void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u32 value; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen; ++ address = (page << g_page_addr) + offset; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ *data = value & 0xff; ++} ++ ++void buffer_to_main_memory(__u8 cmd, __u16 page) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u8 status; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen; ++ address = (page << g_page_addr); ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ atmel_read_status(READ_STATUS_SPI, &status); ++ while(!(status&0x80)) ++ { ++ atmel_read_status(READ_STATUS_SPI, &status); ++ flash_delay(); ++ schedule(); ++ } ++ ++} ++ ++ ++void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len) ++{ ++ __u8 byte; ++ __u16 page, offset; ++ __u16 i; ++ ++ address_to_page(address, &page, &offset); ++ ++ for(i=0; i<len; i++,offset++) ++ { ++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte); ++ buffer [i]= byte; ++ } ++} ++ ++void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len) ++{ ++ __u8 pattern; ++ __u16 page, offset; ++ __u32 i; ++ ++ address_to_page(address, &page, &offset); ++ // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page); ++ ++ if(offset) ++ main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page); ++ ++ for(i=0; i<len; i++,offset++) ++ { ++ pattern = buffer[i]; ++ atmel_buffer_write(BUFFER1_WRITE,offset,pattern); ++ } ++ ++ // printk("atmel_flash_program_page: offset %x \n", offset); ++ buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page); ++ // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page); ++ ++} ++ ++ ++void main_memory_to_buffer(__u8 cmd, __u16 page) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u8 status; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen; ++ address = (page << g_page_addr); ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ atmel_read_status(READ_STATUS_SPI, &status); ++ while(!(status&0x80)) ++ { ++ atmel_read_status(READ_STATUS_SPI, &status); ++ flash_delay(); ++ schedule(); ++ } ++ ++} ++ ++void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u8 status; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen; ++ address = (page << g_page_addr) + offset; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ atmel_read_status(READ_STATUS_SPI, &status); ++ while(!(status&0x80)) ++ { ++ atmel_read_status(READ_STATUS_SPI, &status); ++ flash_delay(); ++ schedule(); ++ } ++} ++ ++void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data) ++{ ++ __u32 opcode; ++ __u32 address; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen; ++ address = offset; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ++} ++ ++void atmel_erase_page(__u8 cmd, __u16 page) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u8 status; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen; ++ address = (page << g_page_addr); ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ atmel_read_status(READ_STATUS_SPI, &status); ++ while(!(status&0x80)) ++ { ++ atmel_read_status(READ_STATUS_SPI, &status); ++ flash_delay(); ++ schedule(); ++ } ++ ++} ++ ++void atmel_erase_block(__u8 cmd, __u16 block) ++{ ++ __u32 opcode; ++ __u32 address; ++ __u8 status; ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen; ++ address = (block << 13); ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(opcode&0x80000000) ++ { ++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ atmel_read_status(READ_STATUS_SPI, &status); ++ while(!(status&0x80)) ++ { ++ atmel_read_status(READ_STATUS_SPI, &status); ++ flash_delay(); ++ schedule(); ++ } ++ ++} ++ ++void flash_delay(void) ++{ ++ int i; ++ ++ for(i=0; i<50; i++) ++ i=i; ++} ++ ++ ++ ++ ++__u32 sl2312_read32(struct map_info *map, unsigned long ofs) ++{ ++ ++#if 0 ++ __u16 page, offset; ++ __u32 pattern; ++ __u8 byte, i; ++ ++ pattern = 0; ++ address_to_page(ofs, &page, &offset); ++ for(i=0; i<4; i++, offset++) ++ { ++ pattern = pattern << 8; ++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte); ++//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte); ++ pattern += byte; ++ } ++ return pattern; ++#else ++ return read_flash_ctrl_reg(ofs); ++#endif ++ ++} ++ ++__u8 sl2312_read8(struct map_info *map, unsigned long ofs) ++{ ++ __u16 page, offset; ++ __u8 byte; ++ ++ address_to_page(ofs, &page, &offset); ++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte); ++ //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte); ++ return byte; ++ ++} ++ ++void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs) ++{ ++#if 0 ++ __u16 page, offset; ++ __u8 byte, i; ++ ++ address_to_page(ofs, &page, &offset); ++ for(i=0; i<4; i++, offset++) ++ { ++ byte = d & 0xff; ++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte); ++ d = d >> 8; ++//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte); ++ } ++#else ++ write_flash_ctrl_reg(ofs, d); ++#endif ++} ++ ++void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs) ++{ ++ __u16 page, offset; ++ ++ address_to_page(ofs, &page, &offset); ++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d); ++//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d); ++ ++} ++ ++void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len) ++{ ++ __u32 size; ++ __u8 *buffer; ++ __u32 length;//i, j, ++ ++ //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len); ++ ++ length = len; ++ buffer = (__u8 *)buf; ++ while(len) ++ { ++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE); ++ if(size > len) ++ size = len; ++ atmel_flash_read_page(ofs, buffer, size); ++ buffer+=size; ++ ofs+=size; ++ len -= size; ++ } ++ ++#if 0 ++ buffer = (__u8 *)buf; ++ for(i=0; i<length; i+=16) ++ { ++ for(j=0; j<16; j++,buffer++) ++ { ++ if((i*16+j)<length) ++ printk("%x ",(int)*buffer); ++ } ++ printk("\n"); ++ } ++ ++ printk("\n"); ++#endif ++ ++} ++ ++ ++void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len) ++{ ++ __u32 size; ++ __u8 *buffer; ++ ++ buffer = (__u8 *)buf; ++ //printk("sl2312_copy_to:offset %x len %x \n", ofs, len); ++// printk("sl2312_copy_to:buf is %x \n", (int)buf); ++ ++ while(len) ++ { ++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE); ++ if(size > len) ++ size = len; ++ atmel_flash_program_page(ofs, buffer, size); ++ buffer+=size; ++ ofs+=size; ++ len-=size; ++ } ++ ++ ++} ++ ++ ++static struct mtd_info *serial_mtd; ++ ++static struct mtd_partition *parsed_parts; ++ ++static struct map_info sl2312_serial_map = { ++// name: "SL2312 serial flash", ++// size: 4194304, //0x400000, ++// //buswidth: 4, ++// bankwidth: 4, ++// phys: SL2312_FLASH_BASE, ++//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS ++// //read32: sl2312_read32, ++// //read8: sl2312_read8, ++// copy_from: sl2312_copy_from, ++// //write8: sl2312_write8, ++// //write32: sl2312_write32, ++// read: sl2312_read32, ++// write: sl2312_write32, ++// copy_to: sl2312_copy_to ++//#endif ++ .name = "SL2312 serial flash", ++ .size = 4194304, //0x400000, ++ //buswidth: 4, ++ .bankwidth = 4, ++ .phys = SL2312_FLASH_BASE, ++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS ++ //read32: sl2312_read32, ++ //read8: sl2312_read8, ++ .copy_from = sl2312_copy_from, ++ //write8: sl2312_write8, ++ //write32: sl2312_write32, ++ .read = sl2312_read32, ++ .write = sl2312_write32, ++ .copy_to = sl2312_copy_to ++#endif ++}; ++ ++ ++ ++static struct mtd_partition sl2312_partitions[] = { ++ ++ ++ ///* boot code */ ++ //{ name: "bootloader", offset: 0x00000000, size: 0x20000, }, ++ ///* kernel image */ ++ //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 }, ++ ///* All else is writable (e.g. JFFS) */ ++ //{ name: "user data", offset: 0x00300000, size: 0x00100000, }, ++ /* boot code */ ++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, }, ++ /* kernel image */ ++ { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 }, ++ /* All else is writable (e.g. JFFS) */ ++ { .name = "user data", .offset = 0x00100000, .size = 0x00300000, }, ++ ++ ++}; ++ ++ ++ ++static int __init init_sl2312_maps(void) ++{ ++ int nr_parts = 0; ++ struct mtd_partition *parts; ++ ++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!serial_mtd) ++ return NULL; ++ ++ memset(serial_mtd, 0, sizeof(struct mtd_info)); ++ //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE); ++ //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE; ++ sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE); ++ if (!sl2312_serial_map.virt) { ++ printk(" failed to ioremap \n"); ++ return -EIO; ++ } ++ serial_mtd = do_map_probe("map_serial", &sl2312_serial_map); ++ if (serial_mtd) { ++ //serial_mtd->module = THIS_MODULE; ++ serial_mtd->owner = THIS_MODULE; ++ ++ } ++ ++#ifdef CONFIG_MTD_REDBOOT_PARTS ++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts); ++ if (nr_parts > 0) ++ printk(KERN_NOTICE "Found RedBoot partition table.\n"); ++ else if (nr_parts < 0) ++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n"); ++#else ++ parsed_parts = sl2312_partitions; ++ parts = sl2312_partitions; ++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts); ++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts); ++#endif /* CONFIG_MTD_REDBOOT_PARTS */ ++ ++ if (nr_parts > 0) ++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts); ++ else ++ add_mtd_device(serial_mtd); ++ ++ return 0; ++} ++ ++static void __exit cleanup_sl2312_maps(void) ++{ ++ if (parsed_parts) ++ del_mtd_partitions(serial_mtd); ++ else ++ del_mtd_device(serial_mtd); ++ ++ map_destroy(serial_mtd); ++ ++ ++} ++ ++module_init(init_sl2312_maps); ++module_exit(cleanup_sl2312_maps); ++ ++ ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>"); ++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards"); ++ +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-cfi.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-cfi.c 2008-03-15 17:04:09.377756409 +0200 +@@ -0,0 +1,370 @@ ++/*====================================================================== ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++======================================================================*/ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/ioport.h> ++#include <linux/init.h> ++#include <linux/string.h> ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/partitions.h> ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/system.h> ++#include <asm/arch/sl2312.h> ++#include <linux/mtd/kvctl.h> ++#include "sl2312_flashmap.h" ++ ++ ++//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **); ++ ++/* the base address of FLASH control register */ ++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE)) ++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++/* define read/write register utility */ ++#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR)) ++#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR)) ++ ++/* the offset of FLASH control register */ ++enum EMAC_REGISTER { ++ FLASH_ID = 0x0000, ++ FLASH_STATUS = 0x0008, ++ FLASH_TYPE = 0x000c, ++ FLASH_ACCESS = 0x0020, ++ FLASH_ADDRESS = 0x0024, ++ FLASH_DATA = 0x0028, ++ FLASH_TIMING = 0x002c, ++}; ++ ++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR ++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE ++ ++//#define FLASH_PART_SIZE 8388608 ++ ++static unsigned int flash_indirect_access = 0; ++ ++#ifdef CONFIG_SL2312_SHARE_PIN ++static unsigned int chip_en = 0x00000000; ++ ++void sl2312flash_enable_parallel_flash(void) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30); ++ reg_val = reg_val & 0xfffffffd; ++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30); ++ return; ++} ++ ++void sl2312flash_disable_parallel_flash(void) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30); ++ reg_val = reg_val | 0x00000002; ++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30); ++ return; ++} ++#endif ++ ++ ++static struct map_info sl2312flash_map = ++{ ++ name: "SL2312 CFI Flash", ++ size: FLASH_SIZE, ++ bankwidth: 2, ++ //bankwidth: 1, //for 8 bits width ++ phys: SL2312_FLASH_BASE, ++}; ++ ++static struct mtd_info *mtd; ++#if 0 ++static struct mtd_partition sl2312_partitions[] = { ++ /* boot code */ ++ { ++ name: "bootloader", ++ offset: 0x00000000, ++ size: 0x20000, ++// mask_flags: MTD_WRITEABLE, ++ }, ++ /* kernel image */ ++ { ++ name: "kerel image", ++ offset: 0x00020000, ++ size: 0x2E0000 ++ }, ++ /* All else is writable (e.g. JFFS) */ ++ { ++ name: "user data", ++ offset: 0x00300000, ++ size: 0x00100000, ++ } ++}; ++#endif ++ ++ ++ ++static int __init sl2312flash_init(void) ++{ ++ struct mtd_partition *parts; ++ int nr_parts = 0; ++ int ret; ++#ifndef CONFIG_SL2312_SHARE_PIN ++ unsigned int reg_val; ++#endif ++ ++ printk("SL2312 MTD Driver Init.......\n"); ++ ++#ifndef CONFIG_SL2312_SHARE_PIN ++ /* enable flash */ ++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30); ++ reg_val = reg_val & 0xfffffffd; ++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30); ++#else ++ sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */ ++#endif ++ FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */ ++ ret = FLASH_READ_REG(FLASH_ACCESS); ++ if (ret == 0x00004000) ++ { ++ flash_indirect_access = 0; /* parallel flash direct access */ ++ } ++ else ++ { ++ flash_indirect_access = 1; /* parallel flash indirect access */ ++ } ++ ++ /* ++ * Also, the CFI layer automatically works out what size ++ * of chips we have, and does the necessary identification ++ * for us automatically. ++ */ ++#ifdef CONFIG_GEMINI_IPI ++ sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE); ++#else ++ sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE); ++#endif ++ //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt); ++ ++// simple_map_init(&sl2312flash_map); ++ ++ mtd = do_map_probe("cfi_probe", &sl2312flash_map); ++ if (!mtd) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */ ++#endif ++ return -ENXIO; ++ } ++ mtd->owner = THIS_MODULE; ++// mtd->erase = flash_erase; ++// mtd->read = flash_read; ++// mtd->write = flash_write; ++ ++ parts = sl2312_partitions; ++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts); ++ ret = add_mtd_partitions(mtd, parts, nr_parts); ++ /*If we got an error, free all resources.*/ ++ if (ret < 0) { ++ del_mtd_partitions(mtd); ++ map_destroy(mtd); ++ } ++#ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */ ++#endif ++ printk("SL2312 MTD Driver Init Success ......\n"); ++ return ret; ++} ++ ++static void __exit sl2312flash_exit(void) ++{ ++ if (mtd) { ++ del_mtd_partitions(mtd); ++ map_destroy(mtd); ++ } ++ ++ if (sl2312flash_map.virt) { ++ iounmap((void *)sl2312flash_map.virt); ++ sl2312flash_map.virt = 0; ++ } ++} ++ ++char chrtohex(char c) ++{ ++ char val; ++ if ((c >= '0') && (c <= '9')) ++ { ++ val = c - '0'; ++ return val; ++ } ++ else if ((c >= 'a') && (c <= 'f')) ++ { ++ val = 10 + (c - 'a'); ++ return val; ++ } ++ else if ((c >= 'A') && (c <= 'F')) ++ { ++ val = 10 + (c - 'A'); ++ return val; ++ } ++ printk("<1>Error number\n"); ++ return 0; ++} ++ ++ ++int get_vlaninfo(vlaninfo* vlan) ++{ ++ vctl_mheader head; ++ vctl_entry entry; ++ struct mtd_info *mymtd=NULL; ++ int i, j, loc = 0; ++ char *payload=0, *tmp1, *tmp2, tmp3[9]; ++ size_t retlen; ++ ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_enable_parallel_flash(); ++ #endif ++ for(i=0;i<MAX_MTD_DEVICES;i++) ++ { ++ mymtd=get_mtd_device(NULL,i); ++ // printk("mymtd->name: %s\n", mymtd->name); ++ if(mymtd && !strcmp(mymtd->name,"VCTL")) ++ { ++ // printk("%s\n", mymtd->name); ++ break; ++ } ++ } ++ if( i >= MAX_MTD_DEVICES) ++ { ++ printk("Can't find version control\n"); ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ return 0; ++ } ++ ++ if (!mymtd | !mymtd->read) ++ { ++ printk("<1>Can't read Version Configuration\n"); ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ return 0; ++ } ++ ++ mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head); ++ // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]); ++ // printk("entry number: %x\n", head.entry_num); ++ if ( strncmp(head.header, "FLFM", 4) ) ++ { ++ printk("VCTL is a erase block\n"); ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ return 0; ++ } ++ loc += retlen; ++ for (i = 0; i < head.entry_num; i++) ++ { ++ mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry); ++ // printk("type: %x\n", entry.type); ++ // printk("size: %x\n", entry.size); ++ strncpy(tmp3, entry.header, 4); ++ if (entry.type == VCT_VLAN) ++ { ++ for (j = 0; j < 6 ; j++) ++ { ++ vlan[0].mac[j] = 0; ++ vlan[1].mac[j] = 0; ++ } ++ vlan[0].vlanid = 1; ++ vlan[1].vlanid = 2; ++ vlan[0].vlanmap = 0x7F; ++ vlan[1].vlanmap = 0x80; ++ ++ payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL); ++ loc += VCTL_ENTRY_LEN; ++ mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload); ++ // printk("%s\n", payload); ++ tmp1 = strstr(payload, "MAC1:"); ++ tmp2 = strstr(payload, "MAC2:"); ++ if(!tmp1||!tmp2){ ++ kfree(payload); ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ printk("Error VCTL format!!\n"); ++ return 0; ++ } ++ tmp1 += 7; ++ tmp2 += 7; ++ ++ ++ for (j = 0; j < 6; j++) ++ { ++ vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]); ++ vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]); ++ } ++ tmp1 = strstr(payload, "ID1:"); ++ tmp2 = strstr(payload, "ID2:"); ++ tmp1 += 4; ++ tmp2 += 4; ++ vlan[0].vlanid = tmp1[0] - '0'; ++ vlan[1].vlanid = tmp2[0] - '0'; ++ tmp1 = strstr(payload, "MAP1:"); ++ tmp2 = strstr(payload, "MAP2:"); ++ tmp1 += 7; ++ tmp2 += 7; ++ vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]); ++ vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]); ++ // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]); ++ // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]); ++ break; ++ } ++ loc += entry.size; ++ } ++ if ( entry.type == VCT_VLAN ) ++ { ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ kfree(payload); ++ return 1; ++ } ++ if (i >= head.entry_num) ++ printk("Can't find vlan information\n"); ++ #ifdef CONFIG_SL2312_SHARE_PIN ++ sl2312flash_disable_parallel_flash(); ++ #endif ++ return 0; ++} ++ ++EXPORT_SYMBOL(get_vlaninfo); ++ ++ ++module_init(sl2312flash_init); ++module_exit(sl2312flash_exit); ++ ++MODULE_AUTHOR("Storlink Ltd"); ++MODULE_DESCRIPTION("CFI map driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-m25p80.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-m25p80.c 2008-03-15 17:04:15.378098557 +0200 +@@ -0,0 +1,498 @@ ++/* ++ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $ ++ * ++ * Flash and EPROM on Hitachi Solution Engine and similar boards. ++ * ++ * (C) 2001 Red Hat, Inc. ++ * ++ * GPL'd ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++ ++#include <asm/io.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/partitions.h> ++#include <asm/hardware.h> ++ ++#include <asm/arch/sl2312.h> ++#include <asm/arch/flash.h> ++#include <linux/init.h> //add ++#define g_chipen SERIAL_FLASH_CHIP0_EN //ST ++ ++//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en); ++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en); ++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); ++ ++ ++static __u32 read_flash_ctrl_reg(__u32 ofs) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ return __raw_readl(base); ++} ++ ++static void write_flash_ctrl_reg(__u32 ofs,__u32 data) ++{ ++ __u32 *base; ++ ++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs)); ++ __raw_writel(data, base); ++} ++ ++static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en) ++{ ++ __u32 opcode,status; ++ __u32 value; ++ ++ //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ; ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ ++ opcode|=g_chipen; ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(status&0x80000000) ++ { ++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ *data = value & 0xff; ++} ++ ++static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en) ++{ ++ __u32 opcode; ++ __u32 status; ++ __u32 tmp; ++ int res = FLASH_ERR_OK; ++ //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data; ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS; ++ ++ opcode|=g_chipen; ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ //middle delay_ms(130); ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ if((status&0x02)==0x02) ++ { ++ //middle delay_ms(100); ++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en); ++ } ++ ++ ++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en); ++ ////middle delay_ms(10); ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data); ++ ++ //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //while(status!=data) ++ //{ ++ // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ // //middle delay_ms(10); ++ //} ++ ++ opcode|=g_chipen; ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS; ++ ++ opcode|=g_chipen; ++ ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //while(status&0xfd) ++ while(status&0x01) ++ { ++ //if((status&0x9c)!=0) ++ // printf(" m25p80_page_program Protect Status = %x\n",status); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ flash_delay(); ++ schedule(); ++ //middle delay_ms(50); ++ } ++ //printf("status = %x, data = %x\n",status,data); ++ if((status&0x02)==0x02) ++ { ++ //middle delay_ms(100); ++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en); ++ } ++ //};//while (len > 0) ++ return res; ++} ++ ++void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len) ++{ ++// __u32 size; ++ __u8 *buffer; ++ __u32 length;//i, j, ++ ++ length = len; ++ buffer = (__u8 *)buf; ++ while(len) ++ { ++ m25p80_read(ofs, buffer, g_chipen); ++ buffer++; ++ ofs++; ++ len --; ++ } ; ++ ++} ++ ++__u32 m25p80_read32(struct map_info *map, unsigned long ofs) ++{ ++ ++ return read_flash_ctrl_reg(ofs); ++ ++ ++} ++ ++void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs) ++{ ++ ++ write_flash_ctrl_reg(ofs, d); ++ ++} ++ ++void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len) ++{ ++ __u32 size, i, ret; ++ ++ while(len > 0) ++ { ++ if(len >= M25P80_PAGE_SIZE) ++ size = M25P80_PAGE_SIZE; ++ else ++ size = len; ++ ++ for(i=0;i<size;i++) ++ { ++ ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen); ++ } ++ buf+=M25P80_PAGE_SIZE; ++ ofs+=M25P80_PAGE_SIZE; ++ len-=M25P80_PAGE_SIZE; ++ ++ }; ++ ++ ++} ++ ++static struct mtd_info *serial_mtd; ++ ++static struct mtd_partition *parsed_parts; ++ ++static struct map_info m25p80_map = { ++ ++ .name = "SL2312 serial flash m25p80", ++ .size = 1048576, //0x100000, ++ //buswidth: 4, ++ .bankwidth = 4, ++ .phys = SL2312_FLASH_BASE, ++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS ++ .copy_from = m25p80_copy_from, ++ .read = m25p80_read32, ++ .write = m25p80_write32, ++ .copy_to = m25p80_copy_to ++#endif ++}; ++ ++ ++ ++static struct mtd_partition m25p80_partitions[] = { ++ ++ /* boot code */ ++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, }, ++ /* kernel image */ ++ { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 }, ++ /* All else is writable (e.g. JFFS) */ ++ { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, }, ++ ++ ++}; ++ ++void flash_delay() ++{ ++ int i,j; ++ for(i=0;i<0x100;i++) ++ j=i*3+5; ++} ++ ++int m25p80_sector_erase(__u32 address, __u32 schip_en) ++{ ++ __u32 opcode; ++ __u32 status; ++ __u32 tmp; ++ int res = FLASH_ERR_OK; ++ //printf("\n-->m25p80_sector_erase"); ++ if(address >= FLASH_START) ++ address-=FLASH_START; ++ ++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en); ++ //printf("\n m25p80_sector_erase : after we-en"); ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE; ++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address); ++ #ifdef MIDWAY_DIAG ++ opcode|=schip_en; ++ #endif ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS; ++ #ifdef MIDWAY_DIAG ++ opcode|=schip_en; ++ #endif ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //while(status&0xfd) ++ while(status&0x01) ++ { ++ //if((status&0x9c)!=0) ++ // printf(" m25p80_sector_erase Protect Status = %x\n",status); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ flash_delay(); ++ schedule(); ++ //middle delay_ms(50); ++ } ++ if((status&0x02)==0x02) ++ { ++ //middle delay_ms(100); ++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en); ++ } ++ //printf("\n<--m25p80_sector_erase"); ++ return res; ++} ++ ++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en) ++{ ++ __u32 opcode,tmp; ++ __u32 status; ++ ++ ++ ++ ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd; ++ ++ opcode|=g_chipen; ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ ////// ++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS; ++ ++ opcode|=g_chipen; ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ //middle delay_ms(130); ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //printf("\ncmd =%x status = %x",cmd,status); ++ if(cmd==M25P80_WRITE_ENABLE) ++ { ++ //printf("\n**-->enable** status = %x",status); ++ //middle delay_ms(100); ++ while((status&0x03) != 2) ++ { ++ //if((status&0x9c)!=0) ++ // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status); ++ ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ //flash_delay(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //printf("\n**enable** status = %x",status); ++ flash_delay(); ++ schedule(); ++ //middle delay_ms(100); ++ } ++ } ++ else if(cmd==M25P80_WRITE_DISABLE) ++ { ++ //while((status&0x03) == 2) ++ // printf("\n**disable** status = %x",status); ++ //middle delay_ms(100); ++ while((status&0x03) != 0) ++ { ++ //m25p80_write_status((status&0xfd),schip_en); ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ //printf("\n**disable** status = %x",status); ++ flash_delay(); ++ schedule(); ++ //middle delay_ms(50); ++ } ++ } ++ else ++ { ++ //while((status&0x01) !=0) ++ while((status&0x01) !=0) ++ { ++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode); ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ while(tmp&0x80000000) ++ { ++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET); ++ flash_delay(); ++ schedule(); ++ } ++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET); ++ flash_delay(); ++ schedule(); ++ //middle delay_ms(50); ++ } ++ } ++ ////// ++ ++ //printf("\n<-- status = %x",status); ++} ++ ++static int __init init_sl2312_m25p80(void) ++{ ++ int nr_parts = 0; ++ struct mtd_partition *parts; ++ ++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!serial_mtd) ++ return NULL; ++ ++ memset(serial_mtd, 0, sizeof(struct mtd_info)); ++ m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE); ++ if (!m25p80_map.virt) { ++ printk(" failed to ioremap \n"); ++ return -EIO; ++ } ++ serial_mtd = do_map_probe("map_serial", &m25p80_map); ++ if (serial_mtd) { ++ serial_mtd->owner = THIS_MODULE; ++ ++ } ++ ++#ifdef CONFIG_MTD_REDBOOT_PARTS ++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts); ++ if (nr_parts > 0) ++ printk(KERN_NOTICE "Found RedBoot partition table.\n"); ++ else if (nr_parts < 0) ++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n"); ++#else ++ parsed_parts = m25p80_partitions; ++ parts = m25p80_partitions; ++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parts); ++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts); ++#endif /* CONFIG_MTD_REDBOOT_PARTS */ ++ ++ if (nr_parts > 0) ++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts); ++ else ++ add_mtd_device(serial_mtd); ++ ++ return 0; ++} ++ ++static void __exit cleanup_sl2312_m25p80(void) ++{ ++ if (parsed_parts) ++ del_mtd_partitions(serial_mtd); ++ else ++ del_mtd_device(serial_mtd); ++ ++ map_destroy(serial_mtd); ++ ++ ++} ++ ++module_init(init_sl2312_m25p80); ++module_exit(cleanup_sl2312_m25p80); ++ ++ ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>"); ++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards"); ++ +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Please note that the name are used in mkflash script. Therefore ++ * don't change them. If you want to add different partitions, you ++ * will need to modify mkflash script as well so that the end image ++ * is what you include here! ++ * ++ * Also, the 7th item is always the size, so please don't add extra ++ * spaces in the name or other items. ++ * ++ * - Alan ++ */ ++ ++static struct mtd_partition sl2312_partitions[] = { ++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, }, ++ { name: "Kernel", offset: 0x00020000, size: 0x00100000, }, ++ { name: "Ramdisk", offset: 0x00120000, size: 0x00500000, }, ++ { name: "etc", offset: 0x00620000, size: 0x001A0000, }, ++ { name: "VCTL", offset: 0x007C0000, size: 0x00010000, }, ++ { name: "cfg", offset: 0x007D0000, size: 0x00020000, }, ++ { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, } ++}; +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.16MB +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.16MB 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Please note that the name are used in mkflash script. Therefore ++ * don't change them. If you want to add different partitions, you ++ * will need to modify mkflash script as well so that the end image ++ * is what you include here! ++ * ++ * Also, the 7th item is always the size, so please don't add extra ++ * spaces in the name or other items. ++ * ++ * - Alan ++ */ ++ ++static struct mtd_partition sl2312_partitions[] = { ++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, }, ++ { name: "Kernel", offset: 0x00020000, size: 0x00300000, }, ++ { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, }, ++ { name: "Application", offset: 0x00920000, size: 0x00600000, }, ++ { name: "VCTL", offset: 0x00F20000, size: 0x00020000, }, ++ { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, }, ++ { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, } ++}; +Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.8MB +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.8MB 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Please note that the name are used in mkflash script. Therefore ++ * don't change them. If you want to add different partitions, you ++ * will need to modify mkflash script as well so that the end image ++ * is what you include here! ++ * ++ * Also, the 7th item is always the size, so please don't add extra ++ * spaces in the name or other items. ++ * ++ * - Alan ++ */ ++ ++static struct mtd_partition sl2312_partitions[] = { ++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, }, ++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, }, ++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, }, ++ { name: "Application", offset: 0x004A0000, size: 0x00300000, }, ++ { name: "VCTL", offset: 0x007A0000, size: 0x00020000, }, ++ { name: "CurConf", offset: 0x007C0000, size: 0x00020000, }, ++ { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, } ++}; +Index: linux-2.6.23.16/drivers/mtd/mtdchar.c +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/mtdchar.c 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/mtdchar.c 2008-03-15 17:03:17.874821522 +0200 +@@ -59,6 +59,77 @@ + enum mtd_file_modes mode; + }; + ++/*********************************************************************** ++/* Storlink SoC -- flash ++/***********************************************************************/ ++#ifdef CONFIG_SL2312_SHARE_PIN ++unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE ++unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE ++static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED; ++EXPORT_SYMBOL(share_pin_flag); ++int dbg=0; ++DECLARE_WAIT_QUEUE_HEAD(wq); ++extern struct wait_queue_head_t *flash_wait; ++unsigned int flash_req=0; ++void mtd_lock() ++{ ++ struct task_struct *tsk = current; ++ unsigned int value ; ++ unsigned long flags; ++ flash_req = 1; ++ DECLARE_WAITQUEUE(wait, tsk); ++ add_wait_queue(&wq, &wait); ++ for(;;) ++ { ++ set_task_state(tsk, TASK_INTERRUPTIBLE); ++ spin_lock_irqsave(&sl2312_flash_lock,flags); ++ if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) { ++ spin_unlock_irqrestore(&sl2312_flash_lock, flags); ++ check_sleep_flag |= 0x00000001; ++ if(dbg) ++ printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag); ++ wake_up_interruptible(&flash_wait); ++ schedule(); ++ } ++ else { ++ check_sleep_flag &= ~0x01; ++ share_pin_flag |= 0x00000001 ; // set share pin flag ++ spin_unlock_irqrestore(&sl2312_flash_lock, flags); ++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG))); ++ value = value & (~PFLASH_SHARE_BIT) ; ++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG))); ++ if(dbg) ++ printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag); ++ tsk->state = TASK_RUNNING; ++ remove_wait_queue(&wq, &wait); ++ return ; ++ } ++ } ++} ++ ++void mtd_unlock() ++{ ++ unsigned int value ; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ ++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG))); ++ value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs ++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG))); ++ share_pin_flag &= ~(0x00000001); // clear share pin flag ++ check_sleep_flag &= ~0x00000001; ++ spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ ++ if (check_sleep_flag & 0x00000002) ++ { ++ check_sleep_flag &= ~(0x00000002); ++ wake_up_interruptible(&flash_wait); ++ } ++ DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n"); ++ flash_req = 0; ++} ++#endif ++/***********************************************************************/ ++ + static loff_t mtd_lseek (struct file *file, loff_t offset, int orig) + { + struct mtd_file_info *mfi = file->private_data; +@@ -162,13 +233,21 @@ + int len; + char *kbuf; + ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_lock(); // sl2312 share pin lock ++#endif ++ + DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n"); + + if (*ppos + count > mtd->size) + count = mtd->size - *ppos; + +- if (!count) ++ if (!count){ ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return 0; ++ } + + /* FIXME: Use kiovec in 2.5 to lock down the user's buffers + and pass them directly to the MTD functions */ +@@ -178,8 +257,12 @@ + else + kbuf=kmalloc(count, GFP_KERNEL); + +- if (!kbuf) ++ if (!kbuf) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -ENOMEM; ++ } + + while (count) { + +@@ -224,6 +307,9 @@ + *ppos += retlen; + if (copy_to_user(buf, kbuf, retlen)) { + kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; + } + else +@@ -235,13 +321,19 @@ + count = 0; + } + else { +- kfree(kbuf); ++ kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return ret; + } + + } + + kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return total_retlen; + } /* mtd_read */ + +@@ -255,24 +347,40 @@ + int ret=0; + int len; + ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_lock(); // sl2312 share pin lock ++#endif ++ + DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n"); + +- if (*ppos == mtd->size) ++ if (*ppos == mtd->size){ ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -ENOSPC; ++ } + + if (*ppos + count > mtd->size) + count = mtd->size - *ppos; + +- if (!count) ++ if (!count){ ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return 0; ++ } + + if (count > MAX_KMALLOC_SIZE) + kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL); + else + kbuf=kmalloc(count, GFP_KERNEL); + +- if (!kbuf) ++ if (!kbuf) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -ENOMEM; ++ } + + while (count) { + +@@ -283,6 +391,9 @@ + + if (copy_from_user(kbuf, buf, len)) { + kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; + } + +@@ -323,11 +434,17 @@ + } + else { + kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return ret; + } + } + + kfree(kbuf); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return total_retlen; + } /* mtd_write */ + +@@ -381,36 +498,67 @@ + u_long size; + struct mtd_info_user info; + ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_lock(); // sl2312 share pin lock ++#endif ++ + DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n"); + + size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT; + if (cmd & IOC_IN) { + if (!access_ok(VERIFY_READ, argp, size)) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + } + if (cmd & IOC_OUT) { + if (!access_ok(VERIFY_WRITE, argp, size)) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + } + + switch (cmd) { + case MEMGETREGIONCOUNT: + if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int))) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + break; + + case MEMGETREGIONINFO: + { + struct region_info_user ur; + +- if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) ++ if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + +- if (ur.regionindex >= mtd->numeraseregions) ++ if (ur.regionindex >= mtd->numeraseregions) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EINVAL; ++ } + if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]), +- sizeof(struct mtd_erase_region_info))) ++ sizeof(struct mtd_erase_region_info))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + break; + } + +@@ -433,7 +581,12 @@ + struct erase_info *erase; + + if(!(file->f_mode & 2)) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EPERM; ++ } + + erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL); + if (!erase) +@@ -447,6 +600,9 @@ + if (copy_from_user(&erase->addr, argp, + sizeof(struct erase_info_user))) { + kfree(erase); ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; + } + erase->mtd = mtd; +@@ -484,14 +640,26 @@ + struct mtd_oob_buf buf; + struct mtd_oob_ops ops; + +- if(!(file->f_mode & 2)) ++ if(!(file->f_mode & 2)) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EPERM; ++ } + +- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) ++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + +- if (buf.length > 4096) ++ if (buf.length > 4096) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EINVAL; ++ } + + if (!mtd->write_oob) + ret = -EOPNOTSUPP; +@@ -499,8 +667,12 @@ + ret = access_ok(VERIFY_READ, buf.ptr, + buf.length) ? 0 : EFAULT; + +- if (ret) ++ if (ret) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return ret; ++ } + + ops.ooblen = buf.length; + ops.ooboffs = buf.start & (mtd->oobsize - 1); +@@ -536,19 +708,35 @@ + struct mtd_oob_buf buf; + struct mtd_oob_ops ops; + +- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) ++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + +- if (buf.length > 4096) ++ if (buf.length > 4096) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EINVAL; ++ } + +- if (!mtd->read_oob) ++ if (!mtd->read_oob) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + ret = -EOPNOTSUPP; ++ } + else + ret = access_ok(VERIFY_WRITE, buf.ptr, + buf.length) ? 0 : -EFAULT; +- if (ret) ++ if (ret) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return ret; ++ } + + ops.ooblen = buf.length; + ops.ooboffs = buf.start & (mtd->oobsize - 1); +@@ -580,7 +768,12 @@ + struct erase_info_user info; + + if (copy_from_user(&info, argp, sizeof(info))) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + + if (!mtd->lock) + ret = -EOPNOTSUPP; +@@ -594,7 +787,12 @@ + struct erase_info_user info; + + if (copy_from_user(&info, argp, sizeof(info))) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + + if (!mtd->unlock) + ret = -EOPNOTSUPP; +@@ -629,11 +827,21 @@ + loff_t offs; + + if (copy_from_user(&offs, argp, sizeof(loff_t))) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + if (!mtd->block_isbad) + ret = -EOPNOTSUPP; + else ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return mtd->block_isbad(mtd, offs); ++ } + break; + } + +@@ -642,11 +850,21 @@ + loff_t offs; + + if (copy_from_user(&offs, argp, sizeof(loff_t))) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + if (!mtd->block_markbad) + ret = -EOPNOTSUPP; + else ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return mtd->block_markbad(mtd, offs); ++ } + break; + } + +@@ -654,8 +872,12 @@ + case OTPSELECT: + { + int mode; +- if (copy_from_user(&mode, argp, sizeof(int))) ++ if (copy_from_user(&mode, argp, sizeof(int))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; ++ } + + mfi->mode = MTD_MODE_NORMAL; + +@@ -670,7 +892,12 @@ + { + struct otp_info *buf = kmalloc(4096, GFP_KERNEL); + if (!buf) ++ { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -ENOMEM; ++ } + ret = -EOPNOTSUPP; + switch (mfi->mode) { + case MTD_MODE_OTP_FACTORY: +@@ -701,12 +928,24 @@ + { + struct otp_info info; + +- if (mfi->mode != MTD_MODE_OTP_USER) ++ if (mfi->mode != MTD_MODE_OTP_USER) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EINVAL; +- if (copy_from_user(&info, argp, sizeof(info))) ++ } ++ if (copy_from_user(&info, argp, sizeof(info))) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EFAULT; +- if (!mtd->lock_user_prot_reg) ++ } ++ if (!mtd->lock_user_prot_reg) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EOPNOTSUPP; ++ } + ret = mtd->lock_user_prot_reg(mtd, info.start, info.length); + break; + } +@@ -742,8 +981,12 @@ + break; + + case MTD_MODE_RAW: +- if (!mtd->read_oob || !mtd->write_oob) ++ if (!mtd->read_oob || !mtd->write_oob) { ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif + return -EOPNOTSUPP; ++ } + mfi->mode = arg; + + case MTD_MODE_NORMAL: +@@ -766,6 +1009,10 @@ + ret = -ENOTTY; + } + ++#ifdef CONFIG_SL2312_SHARE_PIN ++ mtd_unlock(); // sl2312 share pin lock ++#endif ++ + return ret; + } /* memory_ioctl */ + +Index: linux-2.6.23.16/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/nand/Kconfig 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/nand/Kconfig 2008-03-15 17:03:17.874821522 +0200 +@@ -44,6 +44,13 @@ + This enables the driver for the autronix autcpu12 board to + access the SmartMediaCard. + ++config MTD_NAND_SL2312 ++ tristate "NAND Flash device on Storlink board" ++ depends on ARM && MTD_NAND && ARCH_SL2312 ++ help ++ This enables the driver for the Storlink board to ++ access the nand device. ++ + config MTD_NAND_EDB7312 + tristate "Support for Cirrus Logic EBD7312 evaluation board" + depends on ARCH_EDB7312 +Index: linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.c 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,2287 @@ ++/* ++ * drivers/mtd/sl2312.c ++ * ++ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $ ++ * ++ * Copyright (C) 2001 Toshiba Corporation ++ * ++ * 2003 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ * ++ */ ++ ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/nand_ecc.h> ++#include <linux/mtd/partitions.h> ++#include <linux/delay.h> ++#include <asm/io.h> ++#include <asm/hardware.h> ++#include <asm/arch/sl2312.h> ++#include "sl2312-flash-nand.h" ++ ++ ++#include <linux/errno.h> ++#include <linux/sched.h> ++#include <linux/types.h> ++#include <linux/mtd/compatmac.h> ++#include <linux/interrupt.h> ++#include <linux/bitops.h> ++ ++ ++/* ++ * NAND low-level MTD interface functions ++ */ ++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); ++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); ++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); ++ ++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); ++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); ++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); ++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf); ++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, ++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); ++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf); ++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, ++ unsigned long count, loff_t to, size_t * retlen); ++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, ++ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); ++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); ++static void sl2312_nand_sync (struct mtd_info *mtd); ++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel); ++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt); ++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page); ++ ++/* ++ * MTD structure for sl2312 NDFMC ++ */ ++static struct mtd_info *sl2312_mtd = NULL; ++static int nand_page=0,nand_col=0; ++ ++/* Define default oob placement schemes for large and small page devices */ ++static struct nand_oobinfo nand_oob_8 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 3, ++ .eccpos = {0, 1, 2}, ++ .oobfree = { {3, 2}, {6, 2} } ++}; ++ ++static struct nand_oobinfo nand_oob_16 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 6, ++ .eccpos = {0, 1, 2, 3, 6, 7}, ++ .oobfree = { {8, 8} } ++}; ++ ++static struct nand_oobinfo nand_oob_64 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 24, ++ .eccpos = { ++ 40, 41, 42, 43, 44, 45, 46, 47, ++ 48, 49, 50, 51, 52, 53, 54, 55, ++ 56, 57, 58, 59, 60, 61, 62, 63}, ++ .oobfree = { {2, 38} } ++}; ++ ++ ++/* ++ * Define partitions for flash device ++ */ ++/* the base address of FLASH control register */ ++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE)) ++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE)) ++#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE) ++static unsigned int CHIP_EN; ++/* define read/write register utility */ ++//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR)) ++//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR)) ++//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR)) ++//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR)) ++ ++unsigned int FLASH_READ_REG(unsigned int addr) ++{ ++ unsigned int *base; ++ unsigned int data; ++ ++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr); ++ data = *base; ++ return (data); ++} ++ ++void FLASH_WRITE_REG(unsigned int addr,unsigned int data) ++{ ++ unsigned int *base; ++ ++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr); ++ *base = data; ++ return; ++} ++ ++unsigned int FLASH_READ_DATA(unsigned int addr) ++{ ++ unsigned char *base; ++ unsigned int data; ++ ++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr); ++ data = *base; ++ return (data); ++} ++ ++void FLASH_WRITE_DATA(unsigned int addr,unsigned int data) ++{ ++ unsigned char *base; ++ ++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr); ++ *base = data; ++ return; ++} ++ ++/* the offset of FLASH control register */ ++enum NFLASH_REGISTER { ++ NFLASH_ID = 0x0000, ++ NFLASH_STATUS = 0x0008, ++ NFLASH_TYPE = 0x000c, ++ NFLASH_ACCESS = 0x0030, ++ NFLASH_COUNT = 0x0034, ++ NFLASH_CMD_ADDR = 0x0038, ++ NFLASH_ADDRESS = 0x003C, ++ NFLASH_DATA = 0x0040, ++ NFLASH_TIMING = 0x004C, ++ NFLASH_ECC_STATUS = 0x0050, ++ NFLASH_ECC_CONTROL = 0x0054, ++ NFLASH_ECC_OOB = 0x005c, ++ NFLASH_ECC_CODE_GEN0 = 0x0060, ++ NFLASH_ECC_CODE_GEN1 = 0x0064, ++ NFLASH_ECC_CODE_GEN2 = 0x0068, ++ NFLASH_ECC_CODE_GEN3 = 0x006C, ++ NFLASH_FIFO_CONTROL = 0x0070, ++ NFLASH_FIFO_STATUS = 0x0074, ++ NFLASH_FIFO_ADDRESS = 0x0078, ++ NFLASH_FIFO_DATA = 0x007c, ++}; ++ ++ ++ ++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR ++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE ++ ++//#define FLASH_PART_SIZE 8388608 ++ ++//static unsigned int flash_indirect_access = 0; ++ ++ ++#ifdef CONFIG_SL2312_SHARE_PIN ++void sl2312flash_enable_nand_flash(void) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30); ++ reg_val = reg_val & 0xfffffffb; ++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30); ++ return; ++} ++ ++void sl2312flash_disable_nand_flash(void) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30); ++ reg_val = reg_val | 0x00000004; ++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30); ++ return; ++} ++#endif ++ ++extern struct nand_oobinfo jffs2_oobinfo; ++/* ++ * Define partitions for flash devices ++ */ ++ ++static struct mtd_partition sl2312_partitions[] = { ++ { name: "RedBoot", offset: 0x00000000, size: 0x0020000, }, ++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, }, ++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, }, ++ { name: "Application", offset: 0x004A0000, size: 0x00320000, }, ++ { name: "VCTL", offset: 0x007C0000, size: 0x20000, }, ++ { name: "CurConf", offset: 0x007E0000, size: 0x20000, }, ++ { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, } ++ ++}; ++ ++ ++/* ++ * hardware specific access to control-lines ++*/ ++static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ ++ return ; ++} ++ ++static int sl2312_nand_scan_bbt(struct mtd_info *mtd) ++{ ++ return 0; ++} ++ ++/** ++ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad ++ * @mtd: MTD device structure ++ * @ofs: offset relative to mtd start ++ */ ++static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs) ++{ ++ /* Check for invalid offset */ ++ if (ofs > mtd->size) ++ return -EINVAL; ++ ++ return sl2312_nand_block_checkbad (mtd, ofs, 1, 0); ++} ++ ++/** ++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * @getchip: 0, if the chip is already selected ++ * @allowbbt: 1, if its allowed to access the bbt area ++ * ++ * Check, if the block is bad. Either by reading the bad block table or ++ * calling of the scan function. ++ */ ++ ++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page) ++{ ++ int opcode; ++ /* Send commands to erase a page */ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ ++ if(mtd->oobblock > 528) ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command ++ else ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command ++ ++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command ++ FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00 ++ ++ ++ ++ /* read maker code */ ++ opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ //cond_resched(); ++ } ++} ++ ++void sl2312_flash_delay(void) ++{ ++ int i; ++ ++ for(i=0; i<50; i++) ++ i=i; ++} ++ ++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (!this->bbt) ++ return this->block_bad(mtd, ofs, getchip); ++ ++ /* Return info from the table */ ++ return nand_isbad_bbt (mtd, ofs, allowbbt); ++} ++ ++/** ++ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad ++ * @mtd: MTD device structure ++ * @ofs: offset relative to mtd start ++ */ ++static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *this = mtd->priv; ++ int ret; ++ ++ if ((ret = sl2312_nand_block_isbad(mtd, ofs))) { ++ /* If it was bad already, return success and do nothing. */ ++ if (ret > 0) ++ return 0; ++ return ret; ++ } ++ ++ return this->block_markbad(mtd, ofs); ++} ++ ++/* ++ * Get chip for selected access ++ */ ++static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state) ++{ ++ ++ DECLARE_WAITQUEUE (wait, current); ++ ++ /* ++ * Grab the lock and see if the device is available ++ * For erasing, we keep the spinlock until the ++ * erase command is written. ++ */ ++retry: ++ spin_lock_bh (&this->chip_lock); ++ ++ if (this->state == FL_READY) { ++ this->state = new_state; ++ if (new_state != FL_ERASING) ++ spin_unlock_bh (&this->chip_lock); ++ return; ++ } ++ ++ if (this->state == FL_ERASING) { ++ if (new_state != FL_ERASING) { ++ this->state = new_state; ++ spin_unlock_bh (&this->chip_lock); ++ this->select_chip(mtd, 0); /* select in any case */ ++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ return; ++ } ++ } ++ ++ set_current_state (TASK_UNINTERRUPTIBLE); ++ add_wait_queue (&this->wq, &wait); ++ spin_unlock_bh (&this->chip_lock); ++ schedule (); ++ remove_wait_queue (&this->wq, &wait); ++ goto retry; ++} ++ ++/* ++* read device ready pin ++*/ ++static int sl2312_device_ready(struct mtd_info *mtd) ++{ ++ int ready; ++ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data ++ ++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command ++ ++ ++ ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, ready); ++ ++ while(ready&0x80000000) //polling flash access 31b ++ { ++ ready=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ ready=FLASH_READ_REG(NFLASH_DATA)&0xff; ++ return ready; ++} ++void sl2312_enable_hwecc(struct mtd_info *mtd, int mode) ++{ ++ /* reset first */ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0 ++ ++} ++ ++ ++void sl2312_device_setup(void) ++{ ++ ++} ++static u_char sl2312_nand_read_byte(struct mtd_info *mtd) ++{ ++ ++ unsigned int data=0, page=0, col=0, tmp, i; ++ ++ printk ("**************************sl2312_nand_read_byte !! \n"); ++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00; ++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff; ++ page = nand_page; ++ col = nand_col; ++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++) ++ { ++ if(i==col) ++ data = FLASH_READ_DATA(page*mtd->oobblock +i); ++ else ++ tmp = FLASH_READ_DATA(page*mtd->oobblock +i); ++ } ++ return data&0xff; ++} ++ ++static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte) ++{ ++ //struct nand_chip *this = mtd->priv; ++ unsigned int page=0, col=0, i; ++ u_char *databuf,oobbuf[mtd->oobsize]; ++ size_t retlen; ++ retlen=0; ++ printk ("********************sl2312_nand_write_byte !! \n"); ++ page = nand_page; ++ col = nand_col; ++ databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL); ++ ++ if (!databuf) { ++ printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n"); ++ ++ } ++ ++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++) ++ databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i); ++ ++ databuf[col] = byte; ++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL); ++ ++} ++ ++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i, page=0,col=0; ++ struct nand_chip *this = mtd->priv; ++ u_char *databuf, *oobbuf; ++ size_t retlen; ++ retlen=0; ++ ++ ++ printk ("***********************sl2312_nand_write_buf !! \n"); ++ databuf = &(this->data_buf[0]); ++ oobbuf = &(this->data_buf[mtd->oobblock]); ++ for (i = 0; i < mtd->oobsize; i++) ++ oobbuf[i] = 0xff; ++ ++ if(len < mtd->oobblock) ++ { ++ //addr = FLASH_READ_REG(NFLASH_ADDRESS); ++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00; ++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff; ++ page = nand_page; ++ col = nand_col; ++ ++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL); ++ ++ for(i=col;i<len;i++) ++ databuf[col+i] = buf[i]; ++ ++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL); ++ ++ } ++ ++} ++ ++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ int i, page=0,col=0,addr=0,tmp=0; ++ //struct nand_chip *this = mtd->priv; ++ printk ("********************sl2312_nand_read_buf !! \n"); ++ if(len < mtd->oobblock) ++ { ++ //addr = FLASH_READ_REG(NFLASH_ADDRESS); ++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00; ++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff; ++ page = nand_page; ++ col = nand_col; ++ for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++) ++ { ++ if(i<len) ++ buf[i] = FLASH_READ_DATA(addr+i); ++ else ++ tmp = FLASH_READ_DATA(addr+i); ++ } ++ } ++} ++ ++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ //struct nand_chip *this = mtd->priv; ++ u_char *datatmp, *oobtmp; ++ size_t retlen; ++ retlen=0; ++ ++ datatmp = kmalloc (mtd->oobblock,GFP_KERNEL); ++ oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL); ++ ++ if ((!datatmp)||(!oobtmp)) { ++ printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n"); ++ ++ } ++ //page = nand_page; ++ for(i=0;i<mtd->oobblock;i++) ++ datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i); ++ /* read oobdata */ ++ for (i = 0; i < mtd->oobsize; i++) ++ oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i); ++ ++ if(len==mtd->oobblock) ++ { ++ for (i=0; i<len; i++) ++ { ++ if (buf[i] != datatmp[i]) ++ { ++ kfree(datatmp); ++ kfree(oobtmp); ++ printk("Data verify error -> page: %x, byte: %x \n",nand_page,i); ++ return i; ++ } ++ } ++ } ++ else if(len == mtd->oobsize) ++ { ++ for (i=0; i<len; i++) ++ { ++ if (buf[i] != oobtmp[i]) ++ { ++ kfree(datatmp); ++ kfree(oobtmp); ++ printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i); ++ return i; ++ } ++ } ++ } ++ else ++ { ++ printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len); ++ kfree(datatmp); ++ kfree(oobtmp); ++ return -1; ++ } ++ ++ kfree(datatmp); ++ kfree(oobtmp); ++ return 0; ++} ++ ++/* ++ * Send command to NAND device ++ */ ++static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) ++{ ++ register struct nand_chip *this = mtd->priv; ++ int opcode; ++ ++ ++ /* ++ * program and erase have their own busy handlers ++ * status and sequential in needs no delay ++ */ ++ switch (command) { ++ ++ case NAND_CMD_PAGEPROG: ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_ERASE2: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ case NAND_CMD_READ0: ++ ++ /* ++ * Write out the command to the device. ++ */ ++ if (column != -1 || page_addr != -1) { ++ ++ /* Serially input address */ ++ if (column != -1) ++ //FLASH_WRITE_REG(NFLASH_ADDRESS,column); ++ nand_col=column; ++ ++ opcode = FLASH_READ_REG(NFLASH_ADDRESS); ++ ++ if (page_addr != -1) ++ //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8)); ++ nand_page = page_addr; ++ ++ } ++ return; ++ ++ case NAND_CMD_RESET: ++ if (this->dev_ready) ++ break; ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data ++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command ++ ++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ while ( !(sl2312_device_ready(mtd) & 0x40)); ++ { ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ //sl2312_flash_delay(); ++ schedule(); ++ return; ++ } ++ /* This applies to read commands */ ++ default: ++ /* ++ * If we don't have access to the busy pin, we apply the given ++ * command delay ++ */ ++ if (!this->dev_ready) { ++ udelay (this->chip_delay); ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ return; ++ } ++ } ++ ++ /* wait until command is processed */ ++ while (!this->dev_ready(mtd)); ++ ++} ++/*Add function*/ ++static void nand_read_id(int chip_no, unsigned char *id) ++{ ++ unsigned int opcode, i; ++ ++ if(chip_no==0) ++ CHIP_EN = NFLASH_CHIP0_EN; ++ else ++ CHIP_EN = NFLASH_CHIP1_EN; ++ ++ opcode = FLASH_READ_REG(NFLASH_TYPE); ++ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ if((opcode&0x00000300)<=0x00000100) ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data ++ else ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data ++ ++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command ++ FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00 ++ ++ /* read maker code */ ++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ ++ opcode = FLASH_READ_REG(NFLASH_DATA); ++ if(DWIDTH==NFLASH_WiDTH16) ++ { ++ id[0] = opcode&0xff; ++ id[1] = (opcode&0xff00)>>8; ++ } ++ else ++ { ++ id[0] = opcode&0xff; ++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ opcode = FLASH_READ_REG(NFLASH_DATA); ++ id[1] = (opcode&0xff00)>>8; ++ ++ opcode=FLASH_READ_REG(NFLASH_TYPE); ++ if((opcode&0x300)>0x100) ++ { ++ for(i=0;i<2;i++) ++ { ++ //data cycle 3 & 4 ->not use ++ opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ ++ opcode=FLASH_READ_REG(NFLASH_DATA); ++ id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i)); ++ } ++ } ++ } ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++} ++ ++/* ++ * NAND erase a block ++ */ ++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt) ++{ ++ int page, len, status, pages_per_block, ret, chipnr; ++ struct nand_chip *this = mtd->priv; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, ++ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); ++ ++ /* Start address must align on block boundary */ ++ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); ++ return -EINVAL; ++ } ++ ++ /* Length must align on block boundary */ ++ if (instr->len & ((1 << this->phys_erase_shift) - 1)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n"); ++ return -EINVAL; ++ } ++ ++ /* Do not allow erase past end of device */ ++ if ((instr->len + instr->addr) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n"); ++ return -EINVAL; ++ } ++ ++ instr->fail_addr = 0xffffffff; ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL); ++ ++ /* Shift to get first page */ ++ page = (int) (instr->addr >> this->page_shift); ++ chipnr = (int) (instr->addr >> this->chip_shift); ++ ++ /* Calculate pages in each block */ ++ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift); ++ ++ /* Select the NAND device */ ++ //this->select_chip(mtd, chipnr); ++ this->select_chip(mtd, 0); ++ ++ /* Check the WP bit */ ++ /* Check, if it is write protected */ ++ status = sl2312_device_ready(mtd); ++ if (!(status & 0x80)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n"); ++ instr->state = MTD_ERASE_FAILED; ++ goto erase_exit; ++ } ++ ++ /* Loop through the pages */ ++ len = instr->len; ++ ++ instr->state = MTD_ERASING; ++ ++ while (len) { ++ /* Check if we have a bad block, we do not erase bad blocks ! */ ++ if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) { ++ printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page); ++ //instr->state = MTD_ERASE_FAILED; ++ //goto erase_exit; ++ } ++ ++ /* Invalidate the page cache, if we erase the block which contains ++ the current cached page */ ++ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block)) ++ this->pagebuf = -1; ++ ///////// ++ ++ ///* Send commands to erase a page */ ++ //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ // ++ //if(mtd->oobblock > 528) ++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command ++ //else ++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command ++ // ++ //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command ++ //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00 ++ // ++ // ++ // ++ ///* read maker code */ ++ //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command ++ //FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ // ++ //while(opcode&0x80000000) //polling flash access 31b ++ //{ ++ // opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ // //sl2312_flash_delay(); ++ // schedule(); ++ // //cond_resched(); ++ //} ++ sl2312_nand_erase_block(mtd, page); ++ ////////////// ++ status = this->waitfunc (mtd, this, FL_ERASING); ++ /* See if block erase succeeded */ ++ if (status & 0x01) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); ++ instr->state = MTD_ERASE_FAILED; ++ instr->fail_addr = (page << this->page_shift); ++ goto erase_exit; ++ } ++ ++ /* Increment page address and decrement length */ ++ len -= (1 << this->phys_erase_shift); ++ page += pages_per_block; ++ ++ /* Check, if we cross a chip boundary */ ++ if (len && !(page & this->pagemask)) { ++ chipnr++; ++ this->select_chip(mtd, 0); ++ this->select_chip(mtd, 0); ++ } ++ //sl2312_flash_delay(); ++ schedule(); ++ //cond_resched(); ++ } ++ instr->state = MTD_ERASE_DONE; ++ ++erase_exit: ++ /* De-select the NAND device */ ++ this->select_chip(mtd, 0); ++ spin_unlock_bh (&this->chip_lock); ++ ++ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;; ++ /* Do call back function */ ++ if (!ret && instr->callback) ++ instr->callback (instr); ++ ++ /* The device is ready */ ++ spin_lock_bh (&this->chip_lock); ++ this->state = FL_READY; ++ spin_unlock_bh (&this->chip_lock); ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ /* Return more or less happy */ ++ return ret; ++} ++ ++static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip) ++{ ++ //struct nand_chip *this = mtd->priv; ++ ++ switch(chip) { ++ case -1: ++ CHIP_EN = NFLASH_CHIP0_EN; ++ break; ++ case 0: ++ CHIP_EN = NFLASH_CHIP0_EN; ++ break; ++ case 1: ++ CHIP_EN = NFLASH_CHIP1_EN; ++ break; ++ default: ++ CHIP_EN = NFLASH_CHIP0_EN; ++ break; ++ } ++} ++ ++/** ++ * nand_default_block_markbad - [DEFAULT] mark a block bad ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * ++ * This is the default implementation, which can be overridden by ++ * a hardware specific driver. ++*/ ++static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *this = mtd->priv; ++ u_char buf[2] = {0, 0}; ++ size_t retlen; ++ int block; ++ ++ /* Get block number */ ++ block = ((int) ofs) >> this->bbt_erase_shift; ++ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); ++ ++ /* Do we have a flash based bad block table ? */ ++ if (this->options & NAND_USE_FLASH_BBT) ++ return nand_update_bbt (mtd, ofs); ++ ++ /* We write two bytes, so we dont have to mess with 16 bit access */ ++ ofs += mtd->oobsize + (this->badblockpos & ~0x01); ++ return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf); ++} ++ ++/* Appropriate chip should already be selected */ ++static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, ) ++{ ++ u_char *buf, *oobbuf; ++ size_t retlen; ++ unsigned long page, chipnr; ++ struct nand_chip *this = mtd->priv; ++ ++ if (getchip) { ++ page = (int)(ofs >> this->page_shift); ++ chipnr = (int)(ofs >> this->chip_shift); ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd, FL_READING, NULL); ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ } else ++ page = (int) ofs; ++ ++ buf = kmalloc (mtd->oobblock,GFP_KERNEL); ++ oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL); ++ ++ if ((!buf)||(!oobbuf)) { ++ printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n"); ++ ++ } ++ ++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL); ++ ++ ++ if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff))) ++ { ++ kfree(buf); ++ kfree(oobbuf); ++ return 1; ++ } ++ ++ kfree(buf); ++ kfree(oobbuf); ++ return 0; ++} ++ ++/* ++* Use NAND read ECC ++*/ ++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) ++{ ++ return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL); ++} ++ ++/* ++ * NAND read with ECC ++ */ ++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ++ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) ++{ ++ int j, col, page, opcode, i; ++ int end=0;//, ecc=0;//, end_page=0; ++ int erase_state = 0; ++ int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0 ++ struct nand_chip *this = mtd->priv; ++ u_char *data_poi, *oob_data = oob_buf; ++ //u_char ecc_calc[6]; ++ //u_char ecc_code[6]; ++ int eccmode; ++ int *oob_config; ++ ++ ++ ++ // use chip default if zero ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ ++ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; ++ oob_config = oobsel->eccpos; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); ++ ++ /* Do not allow reads past end of device */ ++ if ((from + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n"); ++ *retlen = 0; ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, 0); ++ ++ /* First we calculate the starting page */ ++ page = from >> this->page_shift; ++ ++ //end_page = mtd->oobblock + mtd->oobsize; ++ end = mtd->oobblock; ++ //ecc = mtd->eccsize; ++ /* Get raw starting column */ ++ col = (from & (mtd->oobblock - 1)); ++ ++ ++ /* Send the read command */ ++ //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); ++ ++ /* Loop until all data read */ ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ while (read < len) { ++ ++ //udelay(1200); ++ /* If we have consequent page reads, apply delay or wait for ready/busy pin */ ++ if (read) { ++ if (!this->dev_ready) ++ udelay (this->chip_delay); ++ else ++ while (!this->dev_ready(mtd)); ++ } ++ ++ /* ++ * If the read is not page aligned, we have to read into data buffer ++ * due to ecc, else we read into return buffer direct ++ */ ++ if (!col && (len - read) >= end) ++ data_poi = &buf[read]; ++ else ++ data_poi = this->data_buf; ++ ++ /* get oob area, if we have no oob buffer from fs-driver */ ++ if (!oob_buf) { ++ oob_data = &this->data_buf[end]; ++ oob = 0; ++ } ++ ++ j = 0; ++ switch (eccmode) { ++ case NAND_ECC_NONE: { /* No ECC, Read in a page */ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ break; ++ } ++ ++ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */ ++ break; ++ ++ case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */ ++ break; ++ ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */ ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0 ++ break; ++ ++ default: ++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); ++ //BUG(); ++ }//end switch ++ ++ for(i=0;i<end;i++) ++ { ++ //udelay(7); ++ data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i); ++ } ++ /* read oobdata */ ++ for (i = 0; i < mtd->oobsize; i++) ++ { ++ //udelay(7); ++ oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i); ++ } ++ ++ /* Skip ECC, if not active */ ++ if (eccmode == NAND_ECC_NONE) ++ goto readdata; ++ ++ // compare ecc and correct data ++ ++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS); ++ while(!(opcode&0x80000000)) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ for(j=0;j<(end/512);j++) ++ {//for 2k page ++ ++ opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j]; ++ ++ //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4)); ++ ++ FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode); ++ opcode = 0x00000000|(j<<8); //select ECC code generation 0 ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //??? ++ ++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS); ++ if((opcode&0x00000003)==0x03) ++ { ++ printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n"); ++ ecc_failed++; ++ } ++ else if((opcode&0x00000003)==0x01) ++ { ++ printk (KERN_WARNING "\nPageRead One bit data error !!"); ++ // correct data ++ if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1) ++ data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3)); ++ else ++ data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3)); ++ ++ } ++ else if((opcode&0x00000003)==0x02) ++ { ++ printk (KERN_WARNING "\nPageRead One bit ECC error !!\n"); ++ } ++ else if((opcode&0x00000003)==0x00) ++ { ++ ++ } ++ ++ }//for 2k page ++readdata: ++ if (col || (len - read) < end) { ++ for (j = col; j < end && read < len; j++) ++ buf[read++] = data_poi[j]; ++ } else ++ read += mtd->oobblock; ++ /* For subsequent reads align to page boundary. */ ++ col = 0; ++ /* Increment page address */ ++ page++; ++ schedule(); ++ } ++ /* De-select the NAND device */ ++ //this->select_chip(mtd, -1); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT); ++ /* Wake up anyone waiting on the device */ ++ spin_lock_bh (&this->chip_lock); ++ this->state = FL_READY; ++ wake_up (&this->wq); ++ spin_unlock_bh (&this->chip_lock); ++ ++ /* ++ * Return success, if no ECC failures, else -EIO ++ * fs driver will take care of that, because ++ * retlen == desired len and result == -EIO ++ */ ++ *retlen = read; ++ return ecc_failed ? -EIO : 0; ++} ++ ++/* ++ * Wait for command done. This applies to erase and program only ++ * Erase can take up to 400ms and program up to 20ms according to ++ * general NAND and SmartMedia specs ++ * ++*/ ++static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state) ++{ ++ unsigned long timeo = jiffies; ++ int status, opcode; ++ ++ if (state == FL_ERASING) ++ timeo += (HZ * 400) / 1000; ++ else ++ timeo += (HZ * 20) / 1000; ++ ++ spin_lock_bh (&this->chip_lock); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0 ++ FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data ++ ++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command ++ ++ ++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command ++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode); ++ ++ while(opcode&0x80000000) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ACCESS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ ++ while (time_before(jiffies, timeo)) { ++ /* Check, if we were interrupted */ ++ if (this->state != state) { ++ spin_unlock_bh (&this->chip_lock); ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ return 0; ++ } ++ if (this->dev_ready) { ++ if (this->dev_ready(mtd)) ++ break; ++ } ++ if (FLASH_READ_REG(NFLASH_DATA) & 0x40) ++ break; ++ ++ spin_unlock_bh (&this->chip_lock); ++ yield (); ++ spin_lock_bh (&this->chip_lock); ++ } ++ status = FLASH_READ_REG(NFLASH_DATA)&0xff; ++ spin_unlock_bh (&this->chip_lock); ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ return status; ++} ++ ++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) ++{ ++ int i, col, page, j=0; ++ //int erase_state = 0; ++ struct nand_chip *this = mtd->priv; ++ u_char *databuf, *oobbuf; ++ ++ databuf = &this->data_buf[0]; ++ oobbuf = &this->data_buf[mtd->oobblock]; ++ for (i = 0; i < mtd->oobsize; i++) ++ oobbuf[i] = 0xff; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); ++ ++ /* Shift to get page */ ++ page = ((int) from) >> this->page_shift; ++ ++ /* Mask to get column */ ++ col = from & (mtd->oobsize-1); //0x0f; ++ ++ /* Initialize return length value */ ++ *retlen = 0; ++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL); ++ for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++) ++ buf[j] = oobbuf[i]; ++ ++ *retlen = j ; ++ return 0; ++} ++ ++#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0 ++/* ++* Use NAND write ECC ++*/ ++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) ++{ ++ return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL)); ++} ++ ++/* ++ * NAND write with ECC ++ */ ++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, ++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel) ++{ ++ int page, ret = 0, oob = 0, written = 0; ++ struct nand_chip *this = mtd->priv; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); ++ ++ ++ /* Do not allow write past end of device */ ++ if ((to + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); ++ return -EINVAL; ++ } ++ ++ /* reject writes, which are not page aligned */ ++ if (NOTALIGNED (to) || NOTALIGNED(len)) { ++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); ++ return -EINVAL; ++ } ++ ++ // if oobsel is NULL, use chip defaults ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ ++ /* Shift to get page */ ++ page = ((int) to) >> this->page_shift; ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, 0); ++ ++ /* Check the WP bit */ ++ if (!(sl2312_device_ready(mtd) & 0x80)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n"); ++ ret = -EIO; ++ goto out; ++ } ++ ++ /* Loop until all data is written */ ++ while (written < len) { ++ //udelay(100); ++ int cnt = mtd->oobblock; ++ this->data_poi = (u_char*) &buf[written]; ++ /* We use the same function for write and writev */ ++ if (eccbuf) { ++ ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel); ++ oob += mtd->oobsize; ++ } else ++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel); ++ ++ if (ret) ++ goto out; ++ ++ /* Update written bytes count */ ++ written += cnt; ++ /* Increment page address */ ++ page++; ++ } ++ ++out: ++ /* De-select the NAND device */ ++ //this->select_chip(mtd, -1); ++ ++ /* Wake up anyone waiting on the device */ ++ spin_lock_bh (&this->chip_lock); ++ this->state = FL_READY; ++ wake_up (&this->wq); ++ spin_unlock_bh (&this->chip_lock); ++ ++ *retlen = written; ++ return ret; ++} ++ ++/* ++ * Nand_page_program function is used for write and writev ! ++ * This function will always program a full page of data ++ * If you call it with a non page aligned buffer, you're lost :) ++ */ ++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel) ++{ ++ int i, j, status, opcode; ++ u_char ecc_code[16], *oob_data; ++ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; ++ //int *oob_config = oobsel->eccpos; ++ ++ /* pad oob area, if we have no oob buffer from fs-driver */ ++ if (!oob_buf) { ++ oob_data = &this->data_buf[mtd->oobblock]; ++ for (i = 0; i < mtd->oobsize; i++) ++ oob_data[i] = 0xff; ++ } else ++ oob_data = oob_buf; ++ ++ /* Send command to begin auto page programming */ ++ ++ memset(oob_data,0xff,mtd->oobsize); ++ /* Write out complete page of data, take care of eccmode */ ++ switch (eccmode) { ++ /* No ecc and software ecc 3/256, write all */ ++ case NAND_ECC_NONE: ++ printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n"); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ break; ++ case NAND_ECC_SOFT: ++ break; ++ ++ /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */ ++ case NAND_ECC_HW3_256: ++ break; ++ ++ /* Hardware ecc 3 byte / 512 byte data, write full page */ ++ case NAND_ECC_HW3_512: ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0 ++ ++ /* Hardware ecc 6 byte / 512 byte data, write full page */ ++ case NAND_ECC_HW6_512: ++ break; ++ ++ default: ++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ //BUG(); ++ } ++ ++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT); ++ ++ for(i=0;i<mtd->oobblock;i++) ++ { ++ //udelay(5); ++ FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]); ++ } ++ /////////////// ++ if(eccmode!=NAND_ECC_NONE) ++ { ++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS); ++ while(!(opcode&0x80000000)) //polling flash access 31b ++ { ++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS); ++ //sl2312_flash_delay(); ++ schedule(); ++ } ++ ++ ++ for(i=0;i<(mtd->oobblock/512);i++) ++ { ++ opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4)); ++ ++ for(j=3;j>0;j--) ++ oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24; ++ ++ for(j=0;j<4;j++) ++ { ++ ecc_code[15-i*4] = opcode; ++ ecc_code[15-i*4-1] = opcode>>8; ++ ecc_code[15-i*4-2] = opcode>>16; ++ } ++ } ++ ++ //disable ecc ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); ++ ++ /* Write out OOB data */ ++ for(i=0;i<mtd->oobsize;i++) ++ { ++ //udelay(5); ++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]); ++ } ++ } ++ else ++ { ++ for(i=0;i<mtd->oobsize;i++) ++ { ++ //udelay(5); ++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff); ++ } ++ } ++ ++ ++ /* call wait ready function */ ++ status = this->waitfunc (mtd, this, FL_WRITING); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ /* See if device thinks it succeeded */ ++ if (status & 0x01) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); ++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0 ++ return -EIO; ++ } ++ ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++ /* ++ * The NAND device assumes that it is always writing to ++ * a cleanly erased page. Hence, it performs its internal ++ * write verification only on bits that transitioned from ++ * 1 to 0. The device does NOT verify the whole page on a ++ * byte by byte basis. It is possible that the page was ++ * not completely erased or the page is becoming unusable ++ * due to wear. The read with ECC would catch the error ++ * later when the ECC page check fails, but we would rather ++ * catch it early in the page write stage. Better to write ++ * no data than invalid data. ++ */ ++ ++ /* Send command to read back the page */ ++ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page); ++ /* Loop through and verify the data */ ++ if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); ++ return -EIO; ++ } ++ ++ /* check, if we have a fs-supplied oob-buffer */ ++ if (oob_buf) { ++ if (this->verify_buf(mtd, oob_data, mtd->oobsize)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); ++ return -EIO; ++ } ++ } else { ++ if (eccmode != NAND_ECC_NONE) { ++ int ecc_bytes = 0; ++ ++ switch (this->eccmode) { ++ case NAND_ECC_SOFT: ++ case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break; ++ case NAND_ECC_HW3_512: ecc_bytes = 3; break; ++ case NAND_ECC_HW6_512: ecc_bytes = 6; break; ++ } ++ ++ ++ ++ for(i=0;i < (mtd->oobblock+mtd->oobsize);i++) ++ { ++ if(i>=mtd->oobblock) ++ oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i); ++ else ++ oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i); ++ } ++ ++ if(this->eccmode == NAND_ECC_HW3_512) ++ { ++ for(i=0;i<(mtd->oobblock/512);i++) ++ { ++ for(j=0;j<3;j++) ++ { ++ if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) { ++ DEBUG (MTD_DEBUG_LEVEL0, ++ "%s: Failed ECC write " ++ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i); ++ return -EIO; ++ } ++ } ++ } ++ } ++ }//eccmode != NAND_ECC_NONE ++ } ++ /* ++ * Terminate the read command. This is faster than sending a reset command or ++ * applying a 20us delay before issuing the next programm sequence. ++ * This is not a problem for all chips, but I have found a bunch of them. ++ */ ++ //this->select_chip(mtd, -1); ++ //this->select_chip(mtd, 0); ++#endif ++ ++ return 0; ++} ++ ++/* ++ * NAND write with iovec ++ */ ++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, ++ loff_t to, size_t * retlen) ++{ ++ return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0)); ++} ++ ++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, ++ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel) ++{ ++ int i, page, len, total_len, ret = 0, written = 0; ++ struct nand_chip *this = mtd->priv; ++ ++ /* Calculate total length of data */ ++ total_len = 0; ++ for (i = 0; i < count; i++) ++ total_len += (int) vecs[i].iov_len; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, ++ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); ++ ++ /* Do not allow write past end of page */ ++ if ((to + total_len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); ++ return -EINVAL; ++ } ++ ++ /* reject writes, which are not page aligned */ ++ if (NOTALIGNED (to) || NOTALIGNED(total_len)) { ++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); ++ return -EINVAL; ++ } ++ ++ // if oobsel is NULL, use chip defaults ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ ++ /* Shift to get page */ ++ page = ((int) to) >> this->page_shift; ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, 0); ++ ++ /* Check the WP bit */ ++ if (!(sl2312_device_ready(mtd) & 0x80)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n"); ++ ret = -EIO; ++ goto out; ++ } ++ ++ /* Loop until all iovecs' data has been written */ ++ len = 0; ++ while (count) { ++ /* ++ * Check, if the tuple gives us not enough data for a ++ * full page write. Then we can use the iov direct, ++ * else we have to copy into data_buf. ++ */ ++ if ((vecs->iov_len - len) >= mtd->oobblock) { ++ this->data_poi = (u_char *) vecs->iov_base; ++ this->data_poi += len; ++ len += mtd->oobblock; ++ /* Check, if we have to switch to the next tuple */ ++ if (len >= (int) vecs->iov_len) { ++ vecs++; ++ len = 0; ++ count--; ++ } ++ } else { ++ /* ++ * Read data out of each tuple until we have a full page ++ * to write or we've read all the tuples. ++ */ ++ int cnt = 0; ++ while ((cnt < mtd->oobblock) && count) { ++ if (vecs->iov_base != NULL && vecs->iov_len) { ++ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++]; ++ } ++ /* Check, if we have to switch to the next tuple */ ++ if (len >= (int) vecs->iov_len) { ++ vecs++; ++ len = 0; ++ count--; ++ } ++ } ++ this->data_poi = this->data_buf; ++ } ++ ++ /* We use the same function for write and writev !) */ ++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel); ++ if (ret) ++ goto out; ++ ++ /* Update written bytes count */ ++ written += mtd->oobblock;; ++ ++ /* Increment page address */ ++ page++; ++ } ++ ++out: ++ /* De-select the NAND device */ ++ //this->select_chip(mtd, -1); ++ ++ /* Wake up anyone waiting on the device */ ++ spin_lock_bh (&this->chip_lock); ++ this->state = FL_READY; ++ wake_up (&this->wq); ++ spin_unlock_bh (&this->chip_lock); ++ ++ *retlen = written; ++ return ret; ++} ++ ++/* ++static u_char ffchars[] = { ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff ++}; ++*/ ++/* ++ * NAND write out-of-band ++ */ ++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) ++{ ++ int column, page, status, ret = 0, j=0; ++ struct nand_chip *this = mtd->priv; ++ u_char *databuf, *oobbuf; ++ ++ ++ databuf = &this->data_buf[0]; ++ oobbuf = &this->data_buf[mtd->oobblock]; ++ for (j = 0; j < mtd->oobsize; j++) ++ oobbuf[j] = 0xff; ++//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++// int i; ++//#endif ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); ++ ++ /* Shift to get page */ ++ page = ((int) to) >> this->page_shift; ++ ++ /* Mask to get column */ ++ column = to & 0x1f; ++ ++ /* Initialize return length value */ ++ *retlen = 0; ++ ++ /* Do not allow write past end of page */ ++ if ((column + len) > mtd->oobsize) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n"); ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, 0); ++ ++ /* Reset the chip. Some chips (like the Toshiba TC5832DC found ++ in one of my DiskOnChip 2000 test units) will clear the whole ++ data page too if we don't do this. I have no clue why, but ++ I seem to have 'fixed' it in the doc2000 driver in ++ August 1999. dwmw2. */ ++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ ++ /* Check the WP bit */ ++ if (!(sl2312_device_ready(mtd) & 0x80)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n"); ++ ret = -EIO; ++ goto out; ++ } ++ /* Write out desired data */ ++ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page); ++ ++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL); ++ ++ for(j=column;j<(column+len);j++) ++ oobbuf[j] = buf[j-column]; ++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL); ++ ++ status = this->waitfunc (mtd, this, FL_WRITING); ++ ++ /* See if device thinks it succeeded */ ++ if (status & 0x01) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); ++ ret = -EIO; ++ goto out; ++ } ++ /* Return happy */ ++ *retlen = len; ++ ++ ++out: ++ /* De-select the NAND device */ ++ //this->select_chip(mtd, -1); ++ ++ /* Wake up anyone waiting on the device */ ++ spin_lock_bh (&this->chip_lock); ++ this->state = FL_READY; ++ wake_up (&this->wq); ++ spin_unlock_bh (&this->chip_lock); ++ ++ return ret; ++} ++ ++/* ++ * NAND sync ++ */ ++static void sl2312_nand_sync (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ DECLARE_WAITQUEUE (wait, current); ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n"); ++ ++retry: ++ /* Grab the spinlock */ ++ spin_lock_bh (&this->chip_lock); ++ ++ /* See what's going on */ ++ switch (this->state) { ++ case FL_READY: ++ case FL_SYNCING: ++ this->state = FL_SYNCING; ++ spin_unlock_bh (&this->chip_lock); ++ break; ++ ++ default: ++ /* Not an idle state */ ++ add_wait_queue (&this->wq, &wait); ++ spin_unlock_bh (&this->chip_lock); ++ schedule (); ++ ++ remove_wait_queue (&this->wq, &wait); ++ goto retry; ++ } ++ ++ /* Lock the device */ ++ spin_lock_bh (&this->chip_lock); ++ ++ /* Set the device to be ready again */ ++ if (this->state == FL_SYNCING) { ++ this->state = FL_READY; ++ wake_up (&this->wq); ++ } ++ ++ /* Unlock the device */ ++ spin_unlock_bh (&this->chip_lock); ++} ++ ++ ++/* ++ * Scan for the NAND device ++ */ ++int sl2312_nand_scan (struct mtd_info *mtd, int maxchips) ++{ ++ int i, j, nand_maf_id, nand_dev_id, busw; ++ struct nand_chip *this = mtd->priv; ++ unsigned char id[4]; ++ ++ /* Get buswidth to select the correct functions*/ ++ busw = this->options & NAND_BUSWIDTH_16; ++ ++ /* check for proper chip_delay setup, set 20us if not */ ++ if (!this->chip_delay) ++ this->chip_delay = 20; ++ ++ /* check, if a user supplied command function given */ ++ if (this->cmdfunc == NULL) ++ this->cmdfunc = sl2312_nand_command; ++ ++ /* check, if a user supplied wait function given */ ++ if (this->waitfunc == NULL) ++ this->waitfunc = sl2312_nand_waitfunc; ++ ++ if (!this->select_chip) ++ this->select_chip = sl2312_nand_select_chip; ++ if (!this->write_byte) ++ this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte; ++ if (!this->read_byte) ++ this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte; ++// if (!this->write_word) ++// this->write_word = nand_write_word; ++// if (!this->read_word) ++// this->read_word = nand_read_word; ++// if (!this->block_bad) ++ this->block_bad = sl2312_nand_block_bad; //nand_block_bad; ++ if (!this->block_markbad) ++ this->block_markbad = sl2312_nand_default_block_markbad; ++ if (!this->write_buf) ++ this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf; ++ if (!this->read_buf) ++ this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf; ++ if (!this->verify_buf) ++ this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf; ++ if (!this->scan_bbt) ++ this->scan_bbt = sl2312_nand_scan_bbt; ++ ++ /* Select the device */ ++ this->select_chip(mtd, 0); ++ ++ /* Read manufacturer and device IDs */ ++ nand_read_id(0,id); ++ ++ nand_maf_id = id[0]; ++ nand_dev_id = id[1]; ++ ++ /* Print and store flash device information */ ++ for (i = 0; nand_flash_ids[i].name != NULL; i++) { ++ ++ if (nand_dev_id != nand_flash_ids[i].id) ++ continue; ++ ++ if (!mtd->name) mtd->name = nand_flash_ids[i].name; ++ this->chipsize = nand_flash_ids[i].chipsize << 20; ++ ++ /* New devices have all the information in additional id bytes */ ++ if (!nand_flash_ids[i].pagesize) { ++ int extid; ++ ++ /* The 4th id byte is the important one */ ++ extid = id[3]; ++ /* Calc pagesize */ ++ mtd->oobblock = 1024 << (extid & 0x3); ++ extid >>= 2; ++ /* Calc oobsize */ ++ mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512); ++ extid >>= 2; ++ /* Calc blocksize. Blocksize is multiples of 64KiB */ ++ mtd->erasesize = (64 * 1024) << (extid & 0x03); ++ extid >>= 2; ++ /* Get buswidth information */ ++ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; ++ ++ } else { ++ /* Old devices have this data hardcoded in the ++ * device id table */ ++ mtd->erasesize = nand_flash_ids[i].erasesize; ++ mtd->oobblock = nand_flash_ids[i].pagesize; ++ mtd->oobsize = mtd->oobblock / 32; ++ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; ++ } ++ ++ /* Check, if buswidth is correct. Hardware drivers should set ++ * this correct ! */ ++ if (busw != (this->options & NAND_BUSWIDTH_16)) { ++ printk (KERN_INFO "NAND device: Manufacturer ID:" ++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, ++ nand_manuf_ids[i].name , mtd->name); ++ printk (KERN_WARNING ++ "NAND bus width %d instead %d bit\n", ++ (this->options & NAND_BUSWIDTH_16) ? 16 : 8, ++ busw ? 16 : 8); ++ this->select_chip(mtd, -1); ++ return 1; ++ } ++ ++ /* Calculate the address shift from the page size */ ++ this->page_shift = ffs(mtd->oobblock) - 1; ++ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1; ++ this->chip_shift = ffs(this->chipsize) - 1; ++ ++ /* Set the bad block position */ ++ this->badblockpos = mtd->oobblock > 512 ? ++ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; ++ ++ /* Get chip options, preserve non chip based options */ ++ this->options &= ~NAND_CHIPOPTIONS_MSK; ++ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK; ++ /* Set this as a default. Board drivers can override it, if neccecary */ ++ this->options |= NAND_NO_AUTOINCR; ++ /* Check if this is a not a samsung device. Do not clear the options ++ * for chips which are not having an extended id. ++ */ ++ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize) ++ this->options &= ~NAND_SAMSUNG_LP_OPTIONS; ++ ++ /* Check for AND chips with 4 page planes */ ++ // if (this->options & NAND_4PAGE_ARRAY) ++ // this->erase_cmd = multi_erase_cmd; ++ // else ++ // this->erase_cmd = single_erase_cmd; ++ ++ /* Do not replace user supplied command function ! */ ++ // if (mtd->oobblock > 512 && this->cmdfunc == nand_command) ++ // this->cmdfunc = nand_command_lp; ++ ++ /* Try to identify manufacturer */ ++ for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { ++ if (nand_manuf_ids[j].id == nand_maf_id) ++ break; ++ } ++ printk (KERN_INFO "NAND device: Manufacturer ID:" ++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, ++ nand_manuf_ids[j].name , nand_flash_ids[i].name); ++ break; ++ } ++ ///////////////////////////// ++ ++ for (i=1; i < maxchips; i++) { ++ this->select_chip(mtd, i); ++ ++ /* Send the command for reading device ID */ ++ nand_read_id(1,id); ++ ++ /* Read manufacturer and device IDs */ ++ if (nand_maf_id != id[0] || ++ nand_dev_id != id[1]) ++ break; ++ } ++ if (i > 1) ++ printk(KERN_INFO "%d NAND chips detected\n", i); ++ ++ /* Allocate buffers, if neccecary */ ++ if (!this->oob_buf) { ++ size_t len; ++ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift); ++ this->oob_buf = kmalloc (len, GFP_KERNEL); ++ if (!this->oob_buf) { ++ printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n"); ++ return -ENOMEM; ++ } ++ this->options |= NAND_OOBBUF_ALLOC; ++ } ++ ++ if (!this->data_buf) { ++ size_t len; ++ len = mtd->oobblock + mtd->oobsize; ++ this->data_buf = kmalloc (len, GFP_KERNEL); ++ if (!this->data_buf) { ++ if (this->options & NAND_OOBBUF_ALLOC) ++ kfree (this->oob_buf); ++ printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n"); ++ return -ENOMEM; ++ } ++ this->options |= NAND_DATABUF_ALLOC; ++ } ++ ++ /* Store the number of chips and calc total size for mtd */ ++ this->numchips = i; ++ mtd->size = i * this->chipsize; ++ /* Convert chipsize to number of pages per chip -1. */ ++ this->pagemask = (this->chipsize >> this->page_shift) - 1; ++ /* Preset the internal oob buffer */ ++ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift)); ++ ++ /* If no default placement scheme is given, select an ++ * appropriate one */ ++ if (!this->autooob) { ++ /* Select the appropriate default oob placement scheme for ++ * placement agnostic filesystems */ ++ switch (mtd->oobsize) { ++ case 8: ++ this->autooob = &nand_oob_8; ++ break; ++ case 16: ++ this->autooob = &nand_oob_16; ++ break; ++ case 64: ++ this->autooob = &nand_oob_64; ++ break; ++ default: ++ printk (KERN_WARNING "No oob scheme defined for oobsize %d\n", ++ mtd->oobsize); ++ BUG(); ++ } ++ } ++ ++ /* The number of bytes available for the filesystem to place fs dependend ++ * oob data */ ++ if (this->options & NAND_BUSWIDTH_16) { ++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2); ++ if (this->autooob->eccbytes & 0x01) ++ mtd->oobavail--; ++ } else ++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1); ++ ++ ++ /* ++ * check ECC mode, default to software ++ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize ++ * fallback to software ECC ++ */ ++ this->eccsize = 256; /* set default eccsize */ ++ this->eccbytes = 3; ++ ++ switch (this->eccmode) { ++ case NAND_ECC_HW12_2048: ++ if (mtd->oobblock < 2048) { ++ printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", ++ mtd->oobblock); ++ this->eccmode = NAND_ECC_SOFT; ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ } else ++ this->eccsize = 2048; ++ break; ++ ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW6_512: ++ case NAND_ECC_HW8_512: ++ if (mtd->oobblock == 256) { ++ printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n"); ++ this->eccmode = NAND_ECC_SOFT; ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ } else ++ this->eccsize = 512; /* set eccsize to 512 */ ++ break; ++ ++ case NAND_ECC_HW3_256: ++ break; ++ ++ case NAND_ECC_NONE: ++ printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n"); ++ this->eccmode = NAND_ECC_NONE; ++ break; ++ ++ case NAND_ECC_SOFT: ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ break; ++ ++ default: ++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); ++ BUG(); ++ } ++ ++ /* Check hardware ecc function availability and adjust number of ecc bytes per ++ * calculation step ++ */ ++ switch (this->eccmode) { ++ case NAND_ECC_HW12_2048: ++ this->eccbytes += 4; ++ case NAND_ECC_HW8_512: ++ this->eccbytes += 2; ++ case NAND_ECC_HW6_512: ++ this->eccbytes += 3; ++// case NAND_ECC_HW3_512: ++ case NAND_ECC_HW3_256: ++ if (this->calculate_ecc && this->correct_data && this->enable_hwecc) ++ break; ++ printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n"); ++ BUG(); ++ } ++ ++ mtd->eccsize = this->eccsize; ++ ++ /* Set the number of read / write steps for one page to ensure ECC generation */ ++ switch (this->eccmode) { ++ case NAND_ECC_HW12_2048: ++ this->eccsteps = mtd->oobblock / 2048; ++ break; ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW6_512: ++ case NAND_ECC_HW8_512: ++ this->eccsteps = mtd->oobblock / 512; ++ break; ++ case NAND_ECC_HW3_256: ++ case NAND_ECC_SOFT: ++ this->eccsteps = mtd->oobblock / 256; ++ break; ++ ++ case NAND_ECC_NONE: ++ this->eccsteps = 1; ++ break; ++ } ++ ++ /* Initialize state, waitqueue and spinlock */ ++ this->state = FL_READY; ++ init_waitqueue_head (&this->wq); ++ spin_lock_init (&this->chip_lock); ++ ++ /* De-select the device */ ++ this->select_chip(mtd, 0); ++ ++ /* Print warning message for no device */ ++ if (!mtd->size) { ++ printk (KERN_WARNING "No NAND device found!!!\n"); ++ return 1; ++ } ++ ++ /* Fill in remaining MTD driver data */ ++ mtd->type = MTD_NANDFLASH; ++ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; ++ mtd->ecctype = MTD_ECC_SW; ++ mtd->erase = sl2312_nand_erase; ++ mtd->point = NULL; ++ mtd->unpoint = NULL; ++ mtd->read = sl2312_nand_read; ++ mtd->write = sl2312_nand_write; ++ mtd->read_ecc = sl2312_nand_read_ecc; ++ mtd->write_ecc = sl2312_nand_write_ecc; ++ mtd->read_oob = sl2312_nand_read_oob; ++ mtd->write_oob = sl2312_nand_write_oob; ++ mtd->readv = NULL; ++ mtd->writev = sl2312_nand_writev; ++ mtd->writev_ecc = sl2312_nand_writev_ecc; ++ mtd->sync = sl2312_nand_sync; ++ mtd->lock = NULL; ++ mtd->unlock = NULL; ++ mtd->suspend = NULL; ++ mtd->resume = NULL; ++ mtd->block_isbad = sl2312_nand_block_isbad; ++ mtd->block_markbad = sl2312_nand_block_markbad; ++ ++ /* and make the autooob the default one */ ++ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); ++ ++ mtd->owner = THIS_MODULE; ++ ++ /* Build bad block table */ ++ return this->scan_bbt (mtd); ++} ++ ++/*End Add function*/ ++ ++/* ++ * Main initialization routine ++ */ ++extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); ++ ++int __init sl2312_mtd_init (void) ++{ ++ struct nand_chip *this; ++ int err = 0; ++ struct mtd_partition *parts; ++ int nr_parts = 0; ++ int ret, data, *base; ++ ++ printk("NAND MTD Driver Start Init ......\n"); ++ ++ base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30); ++ data = *base; ++ data&=0xffffffeb; ++ data|=0x3; //disable p & s flash ++ *base = data; ++ ++ /* Allocate memory for MTD device structure and private data */ ++ sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); ++ if (!sl2312_mtd) { ++ printk ("Unable to allocate SL2312 NAND MTD device structure.\n"); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ // sl2312_device_setup(); ++ ++ /* io is indirect via a register so don't need to ioremap address */ ++ ++ /* Get pointer to private data */ ++ this = (struct nand_chip *) (&sl2312_mtd[1]); ++ ++ /* Initialize structures */ ++ memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info)); ++ memset((char *) this, 0, sizeof(struct nand_chip)); ++ ++ /* Link the private data with the MTD structure */ ++ sl2312_mtd->priv = this; ++ sl2312_mtd->name = "sl2312-nand"; ++ ++ /* Set address of NAND IO lines */ ++ this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr); ++ this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr); ++ this->read_byte = sl2312_nand_read_byte; ++ this->write_byte = sl2312_nand_write_byte; ++ this->write_buf = sl2312_nand_write_buf; ++ this->read_buf = sl2312_nand_read_buf; ++ this->verify_buf = sl2312_nand_verify_buf; ++ this->select_chip = sl2312_nand_select_chip; ++ this->block_bad = sl2312_nand_block_bad; ++ this->hwcontrol = sl2312_hwcontrol; ++ this->dev_ready = sl2312_device_ready; ++ this->cmdfunc = sl2312_nand_command; ++ this->waitfunc = sl2312_nand_waitfunc; ++ //this->calculate_ecc = sl2312_readecc; ++ this->enable_hwecc = sl2312_enable_hwecc; ++ this->eccmode = NAND_ECC_HW3_512; ++ /*this->eccsize = 512; */ ++ /* 20 us command delay time */ ++ this->chip_delay = 20; ++ ++ this->correct_data = nand_correct_data; ++// this->scan_bbt = sl2312_nand_scan_bbt; ++ ++ /* Allocate memory for internal data buffer */ ++ this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL); ++ if (!this->data_buf) { ++ printk ("Unable to allocate NAND data buffer.\n"); ++ err = -ENOMEM; ++ goto out_ior; ++ } ++ ++ /* Scan to find existance of the device */ ++ if (sl2312_nand_scan(sl2312_mtd, 1)) { ++ err = -ENXIO; ++ goto out_ior; ++ } ++ ++ /* Register the partitions */ ++ parts = sl2312_partitions; ++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts); ++ ++ ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts); ++ /*If we got an error, free all resources.*/ ++ if (ret < 0) { ++ del_mtd_partitions(sl2312_mtd); ++ map_destroy(sl2312_mtd); ++ } ++ goto out; ++ ++//out_buf: ++// kfree (this->data_buf); ++out_ior: ++out: ++ printk("NAND MTD Driver Init Success ......\n"); ++ return err; ++} ++ ++module_init(sl2312_mtd_init); ++ ++/* ++ * Clean up routine ++ */ ++#ifdef MODULE ++static void __exit sl2312_cleanup (void) ++{ ++ struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1]; ++ ++ /* Unregister partitions */ ++ del_mtd_partitions(sl2312_mtd); ++ ++ /* Unregister the device */ ++ del_mtd_device (sl2312_mtd); ++ ++ /* Free internal data buffers */ ++ kfree (this->data_buf); ++ ++ /* Free the MTD device structure */ ++ kfree (sl2312_mtd); ++} ++module_exit(sl2312_cleanup); ++#endif ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>"); ++MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312"); +Index: linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.h 2008-03-15 17:04:25.878696749 +0200 +@@ -0,0 +1,24 @@ ++#ifndef SL2312_FLASH_NAND_H ++#define SL2312_FLASH_NAND_H ++ ++#include <linux/wait.h> ++#include <linux/spinlock.h> ++ ++/*Add function*/ ++static void nand_read_id(int chip_no,unsigned char *id); ++ ++ ++ ++#define NFLASH_WiDTH8 0x00000000 ++#define NFLASH_WiDTH16 0x00000400 ++#define NFLASH_WiDTH32 0x00000800 ++#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0 ++#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1 ++#define NFLASH_DIRECT 0x00004000 ++#define NFLASH_INDIRECT 0x00000000 ++ ++ ++#define DWIDTH NFLASH_WiDTH8 ++ ++ ++#endif /* SL2312_FLASH_NAND_H */ +Index: linux-2.6.23.16/include/linux/mtd/kvctl.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/include/linux/mtd/kvctl.h 2008-03-15 17:03:17.874821522 +0200 +@@ -0,0 +1,40 @@ ++#ifndef KVCTL_H ++#define KVCTL_H ++ ++#define VCTL_HEAD_SIZE 8 ++#define VCTL_ENTRY_LEN 20 ++ ++typedef struct ++{ ++ char header[4]; ++ unsigned int entry_num; ++} vctl_mheader; ++ ++typedef struct ++{ ++ char header[4]; ++ unsigned int size; ++ unsigned int type; ++ char majorver[4]; ++ char minorver[4]; ++ unsigned char *payload; ++} vctl_entry; ++ ++typedef struct ++{ ++ unsigned char mac[6]; ++ unsigned char vlanid; ++ unsigned char vlanmap; ++} vlaninfo; ++ ++#define VCT_VENDORSPEC 0 ++#define VCT_BOOTLOADER 1 ++#define VCT_KERNEL 2 ++#define VCT_VERCTL 3 ++#define VCT_CURRCONF 4 ++#define VCT_DEFAULTCONF 5 ++#define VCT_ROOTFS 6 ++#define VCT_APP 7 ++#define VCT_VLAN 8 ++ ++#endif +Index: linux-2.6.23.16/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/mtd/maps/Makefile 2008-03-15 17:03:14.374622039 +0200 ++++ linux-2.6.23.16/drivers/mtd/maps/Makefile 2008-03-15 17:03:17.874821522 +0200 +@@ -71,3 +71,7 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o + obj-$(CONFIG_MTD_TQM834x) += tqm834x.o ++###### for Storlink Soc ####### ++obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o ++obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o ++obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o diff --git a/target/linux/storm/patches/1021-serial.patch b/target/linux/storm/patches/1021-serial.patch new file mode 100644 index 0000000000..90880d6467 --- /dev/null +++ b/target/linux/storm/patches/1021-serial.patch @@ -0,0 +1,2825 @@ +Index: linux-2.6.23.16/drivers/serial/it8712.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/it8712.c 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,858 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $ ++ * ++ */ ++#include <linux/module.h> ++#include <linux/tty.h> ++#include <linux/ioport.h> ++#include <linux/init.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <asm/hardware.h> ++#include <asm/system.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++ ++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <linux/serial_core.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/int_ctrl.h> ++#include <asm/arch/it8712.h> ++#include "it8712.h" ++ ++//#define DEBUG 1 ++#define UART_NR 1 ++ ++#define SERIAL_IT8712_NAME "ttySI" ++#define SERIAL_IT8712_MAJOR 204 ++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define SERIAL_IT8712_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++#define LPC_HOST_CONTINUE_MODE 0x00000040 ++ ++#define IT8712_NO_PORTS UART_NR ++#define IT8712_ISR_PASS_LIMIT 256 ++ ++#define LPC_BUS_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4)) ++#define LPC_BUS_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4)) ++#define LPC_SERIAL_IRQ_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8)) ++#define LPC_SERIAL_IRQ_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c)) ++#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10)) ++#define LPC_SERIAL_IRQ_POLARITY *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14)) ++#define LPC_SERIAL_IRQ_ENABLE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18)) ++ ++ ++ ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable ++#define UART_GET_IER(p) inb(((p)->membase+UART_IER)) ++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding ++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer ++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status ++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status ++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control ++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR)) ++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control ++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR)) ++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control ++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM)) ++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM)) ++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL)) ++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL)) ++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++static void it8712_stop_tx(struct uart_port *port, u_int from_tty) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++} ++ ++static void it8712_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_RDI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MSI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs) ++{ ++ struct tty_struct *tty = port->info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ ++ // printk("it8712_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(port, ch, regs)) ++ goto ignore_char; ++ ++ error_return: ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(port)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ port->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void it8712_tx_chars(struct uart_port *port) ++{ ++ struct circ_buf *xmit = &port->info->xmit; ++ int count; ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { ++ it8712_stop_tx(port, 0); ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (uart_circ_empty(xmit)) ++ break; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++ ++ if (uart_circ_empty(xmit)) ++ it8712_stop_tx(port, 0); ++} ++ ++static void it8712_start_tx(struct uart_port *port, unsigned int tty_start) ++{ ++ unsigned int reg; ++ ++ //printk("it8712 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++ it8712_tx_chars(port); ++} ++ ++static void it8712_modem_status(struct uart_port *port) ++{ ++ unsigned int status; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DDCD) ++ uart_handle_dcd_change(port, status & UART_MSR_DCD); ++ ++ if (status & UART_MSR_DDSR) ++ port->icount.dsr++; ++ ++ if (status & UART_MSR_DCTS) ++ uart_handle_cts_change(port, status & UART_MSR_CTS); ++ ++ wake_up_interruptible(&port->info->delta_msr_wait); ++ ++} ++ ++static irqreturn_t it8712_int(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct uart_port *port = dev_id; ++ unsigned int status, pass_counter = 0, data; ++ ++ ++ data = LPC_SERIAL_IRQ_STATUS; ++ if((data&0x10)==0x10) ++ { ++ status = UART_GET_INT_STATUS(port); ++ do { ++// printk("it8712_int: status %x \n", status); ++ switch(status) ++ { ++ case UART_IIR_RDI: ++ case UART_IIR_RLSI: ++ case UART_IIR_RCTO: ++ it8712_rx_chars(port, regs); ++ break; ++ case UART_IIR_THRI: ++ it8712_tx_chars(port); ++ break; ++ case UART_IIR_MSI: ++ it8712_modem_status(port); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(port); ++ } while (status); ++ } ++ ++ status = 0; ++ status |= (IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status; ++ ++ //cnt=0; ++ //do{ ++ // data = LPC_SERIAL_IRQ_STATUS; ++ LPC_SERIAL_IRQ_STATUS = data; ++ // cnt++; ++ //}while(data); ++ //if(cnt>2) ++ // printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt); ++ return IRQ_HANDLED; ++} ++ ++static u_int it8712_tx_empty(struct uart_port *port) ++{ ++// printk("it8712 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int it8712_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("it8712 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void it8712_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("it8712 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SBC; ++ else ++ lcr &= ~UART_LCR_SBC; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (port->uartclk/(16 * baud)) ; ++ ++ return quot; ++} ++static void it8712_set_termios(struct uart_port *port, struct termios *termios, ++ struct termios *old) ++{ ++ unsigned int uart_mc, old_ier, baud, quot; ++ unsigned long flags; ++ ++ termios->c_cflag |= CREAD; ++ termios->c_cflag |= CLOCAL; ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ quot = uart_get_divisor(port, baud); ++ ++ /* byte size and parity */ ++ switch (termios->c_cflag & CSIZE) { ++ case CS5: ++ uart_mc = UART_LCR_WLEN5; ++ break; ++ case CS6: ++ uart_mc = UART_LCR_WLEN6; ++ break; ++ case CS7: ++ uart_mc = UART_LCR_WLEN7; ++ break; ++ default: // CS8 ++ uart_mc = UART_LCR_WLEN8; ++ break; ++ } ++ ++ if (termios->c_cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (termios->c_cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(termios->c_cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ spin_lock_irqsave(&port->lock, flags); ++ /* ++ * Update the per-port timeout ++ */ ++ uart_update_timeout(port, termios->c_cflag, baud); ++ port->read_status_mask = UART_LSR_OE; ++ if (termios->c_iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ old_ier = UART_GET_IER(port); ++ ++ if(UART_ENABLE_MS(port, termios->c_cflag)) ++ old_ier |= UART_IER_MSI; ++ ++ /* Set baud rate */ ++ quot = quot / 13; ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++// UART_PUT_LCR(port, 0x07); // ???? it is wired ++ UART_PUT_MCR(port, 0x08); ++ UART_PUT_FCR(port, 0x01); ++ UART_PUT_IER(port, 0x07); ++ ++ spin_unlock_irqrestore(&port->lock, flags); ++} ++ ++static int it8712_startup(struct uart_port *port) ++{ ++ int retval, i; ++ unsigned int regs; ++ ++ //printk("it8712 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ // regs = 0; ++ // regs |= (IRQ_LPC_MASK); ++ // *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port); ++ if (retval) ++ return retval; ++ ++ //printk("Init LPC int...........\n"); ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_LPC_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK); ++ ++ LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02; ++ LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;// ++ LPC_SERIAL_IRQ_ENABLE = 0x10; ++ ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ for(i=0;i<1000;i++) ; ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ //UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI)); ++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle ++ ++ return 0; ++} ++ ++static void it8712_shutdown(struct uart_port *port) ++{ ++ //printk("it8712 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, port); ++} ++ ++static const char *it8712_type(struct uart_port *port) ++{ ++ return port->type == PORT_IT8712 ? "IT8712" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void it8712_release_port(struct uart_port *port) ++{ ++// printk("it8712 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int it8712_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_it8712") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void it8712_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (it8712_request_port(port) == 0) ++ port->type = PORT_IT8712; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops it8712_pops = { ++ .tx_empty = it8712_tx_empty, ++ .set_mctrl = it8712_set_mctrl_null, ++ .get_mctrl = it8712_get_mctrl, ++ .stop_tx = it8712_stop_tx, ++ .start_tx = it8712_start_tx, ++ .stop_rx = it8712_stop_rx, ++ .enable_ms = it8712_enable_ms, ++ .break_ctl = it8712_break_ctl, ++ .startup = it8712_startup, ++ .shutdown = it8712_shutdown, ++ .set_termios = it8712_set_termios, ++ .type = it8712_type, ++ .release_port = it8712_release_port, ++ .request_port = it8712_request_port, ++ .config_port = it8712_config_port, ++ .verify_port = it8712_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port it8712_ports[UART_NR] = { ++ { ++ membase: (void *)0, ++ mapbase: 0, ++ iotype: SERIAL_IO_MEM, ++ irq: 0, ++ uartclk: UART_CLK/2, ++ fifosize: 16, ++ ops: &it8712_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_IT8712_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int it8712_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("it8712_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void it8712_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = it8712_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ //if(old_ies!=7) ++ //{ ++ // ++ // printk("old_ies = %x\n",old_ies); ++ // old_ies = 7; ++ //} ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_THRE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++ //printk("it8712 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PARITY) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_WLEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_WLEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_WLEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_WLEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = (port->uartclk / (16 *quot)); ++} ++ ++static int __init it8712_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 38400; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ int base;//, irq; ++ int i ; ++ ++ printk("it8712 console setup : \n"); ++ ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ base = IT8712_IO_BASE; ++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ it8712_ports[0].mapbase = base; ++ it8712_ports[0].membase = (void *)IO_ADDRESS(base); ++ it8712_ports[0].irq = IRQ_LPC_OFFSET; ++ // irq = LPCGetConfig(LDN_SERIAL1, 0x70); ++ //it8712_ports[0].irq += irq; ++ ++ //printk("it8712 irq is %x \n", it8712_ports[0].irq); ++ ++ // setup LPC Host 'quiet mode' ++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ; ++ //for(i=0;i<1000;i++) ; // delay ++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ; ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ for(i=0;i<1000;i++) ; ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ it8712_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++extern struct uart_driver it8712_reg; ++static struct console it8712_console = { ++ .name = SERIAL_IT8712_NAME, ++ .write = it8712_console_write, ++ .device = uart_console_device, ++ .setup = it8712_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = 0, ++ .data = &it8712_reg, ++}; ++ ++static int __init it8712_console_init(void) ++{ ++ register_console(&it8712_console); ++ return 0; ++} ++ ++console_initcall(it8712_console_init); ++ ++#define IT8712_CONSOLE &it8712_console ++#else ++#define IT8712_CONSOLE NULL ++#endif ++ ++static struct uart_driver it8712_reg = { ++ .owner = NULL, ++ .driver_name = SERIAL_IT8712_NAME, ++ .dev_name = SERIAL_IT8712_NAME, ++ .major = SERIAL_IT8712_MAJOR, ++ .minor = SERIAL_IT8712_MINOR, ++ .nr = UART_NR, ++ .cons = IT8712_CONSOLE, ++}; ++ ++static int __init it8712_init(void) ++{ ++ int result; ++ //printk("serial_it8712: it871212_init \n"); ++ ++ ++ result = uart_register_driver(&it8712_reg); ++ if(result) ++ return result; ++ result = uart_add_one_port(&it8712_reg, &it8712_ports[0]); ++ ++ return result; ++ ++} ++ ++ ++__initcall(it8712_init); +Index: linux-2.6.23.16/drivers/serial/it8712.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/it8712.h 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,135 @@ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels ++ * XR16C85x only */ ++ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_IER 1 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 1 /* (LCR=BF) Feature Control Register ++ * XR16C85x only */ ++ ++#define UART_IIR 2 /* In: Interrupt ID Register */ ++#define UART_FCR 2 /* Out: FIFO Control Register */ ++#define UART_EFR 2 /* I/O: Extended Features Register */ ++ /* (DLAB=1, 16C660 only) */ ++ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_EMSR 7 /* (LCR=BF) Extended Mode Select Register ++ * FCTR bit 6 selects SCR or EMSR ++ * XR16c85x only */ ++ ++/* ++ * These are the definitions for the FIFO Control Register ++ * (16650 only) ++ */ ++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ ++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ ++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ ++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ ++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ ++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ ++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ ++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ ++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ ++/* 16650 redefinitions */ ++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ ++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ ++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ ++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ ++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ ++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ ++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ ++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ ++/* TI 16750 definitions */ ++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */ ++ ++/* ++ * These are the definitions for the Line Control Register ++ * ++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting ++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. ++ */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_SBC 0x40 /* Set break control */ ++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ ++#define UART_LCR_EPAR 0x10 /* Even parity select */ ++#define UART_LCR_PARITY 0x08 /* Parity Enable */ ++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ ++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ ++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ ++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_LCR_EVEN 0x18 /* Even parity */ ++#define UART_LCR_ODD 0x08 /* Odd parity */ ++#define UART_LCR_MSK 0x03 ++/* ++ * These are the definitions for the Line Status Register ++ */ ++#define UART_LSR_DE 0x80 /* FIFO Data Error */ ++#define UART_LSR_TEMT 0x40 /* Transmitter empty */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_BI 0x10 /* Break interrupt indicator */ ++#define UART_LSR_FE 0x08 /* Frame error indicator */ ++#define UART_LSR_PE 0x04 /* Parity error indicator */ ++#define UART_LSR_OE 0x02 /* Overrun error indicator */ ++#define UART_LSR_DR 0x01 /* Receiver data ready */ ++ ++/* ++ * These are the definitions for the Interrupt Identification Register ++ */ ++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ ++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ ++ ++#define UART_IIR_MSI 0x00 /* Modem status interrupt */ ++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ ++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ ++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ ++#define UART_IIR_RCTO 0x0c /* Receiver character timeout interrupt */ ++/* ++ * These are the definitions for the Interrupt Enable Register ++ */ ++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ ++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ ++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ ++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ ++/* ++ * Sleep mode for ST16650 and TI16750. ++ * Note that for 16650, EFR-bit 4 must be selected as well. ++ */ ++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ ++ ++/* ++ * These are the definitions for the Modem Control Register ++ */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_MCR_OUT2 0x08 /* Out2 complement */ ++#define UART_MCR_OUT1 0x04 /* Out1 complement */ ++#define UART_MCR_RTS 0x02 /* RTS complement */ ++#define UART_MCR_DTR 0x01 /* DTR complement */ ++ ++/* ++ * These are the definitions for the Modem Status Register ++ */ ++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ ++#define UART_MSR_RI 0x40 /* Ring Indicator */ ++#define UART_MSR_DSR 0x20 /* Data Set Ready */ ++#define UART_MSR_CTS 0x10 /* Clear to Send */ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++#define UART_PARITY_NONE 0x00 ++#define UART_PARITY_ODD 0x01 ++#define UART_PARITY_EVEN 0x02 ++ ++ ++ +Index: linux-2.6.23.16/drivers/serial/serial_it8712.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/serial_it8712.c 2008-03-15 17:59:53.568330991 +0200 +@@ -0,0 +1,876 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $ ++ * ++ */ ++#include <linux/module.h> ++ ++#include <linux/errno.h> ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/major.h> ++#include <linux/string.h> ++#include <linux/fcntl.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/circ_buf.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++ ++#include <asm/system.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++ ++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <linux/serial_core.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/int_ctrl.h> ++#include <asm/arch/it8712.h> ++#include "serial_it8712.h" ++ ++//#define DEBUG 1 ++#define UART_NR 1 ++ ++#define SERIAL_IT8712_NAME "ttySI" ++#define SERIAL_IT8712_MAJOR 204 ++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define SERIAL_IT8712_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++ ++#define CALLOUT_IT8712_NAME "cuaslI" ++#define CALLOUT_IT8712_MAJOR 205 ++#define CALLOUT_IT8712_MINOR 41 /* Temporary - will change in future */ ++#define CALLOUT_IT8712_NR UART_NR ++#define LPC_HOST_CONTINUE_MODE 0x00000040 ++ ++#define IT8712_NO_PORTS UART_NR ++ ++static struct tty_driver normal, callout; ++static struct tty_struct *it8712_table[UART_NR]; ++static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR]; ++static struct console it8712_console; ++ ++#define IT8712_ISR_PASS_LIMIT 256 ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable ++#define UART_GET_IER(p) inb(((p)->membase+UART_IER)) ++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding ++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer ++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status ++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status ++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control ++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR)) ++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control ++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR)) ++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control ++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM)) ++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM)) ++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL)) ++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL)) ++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++static void it8712_stop_tx(struct uart_port *port, u_int from_tty) ++{ ++ unsigned int reg; ++ ++// printk("it8712 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++} ++ ++static void it8712_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("it8712 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_RDI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void it8712_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("it8712 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MSI); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void ++it8712_rx_chars(struct uart_info *info, struct pt_regs *regs) ++{ ++ struct tty_struct *tty = info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ struct uart_port *port = info->port; ++ ++ // printk("it8712_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(info, ch, regs)) ++ goto ignore_char; ++ ++ error_return: ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(info, &it8712_console)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ *tty->flip.flag_buf_ptr++ = flg; ++ *tty->flip.char_buf_ptr++ = ch; ++ tty->flip.count++; ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ info->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void it8712_tx_chars(struct uart_info *info) ++{ ++ int count; ++ struct uart_port *port=info->port; ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (info->xmit.head == info->xmit.tail ++ || info->tty->stopped ++ || info->tty->hw_stopped) { ++ it8712_stop_tx(info->port, 0); ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]); ++ info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (info->xmit.head == info->xmit.tail) ++ break; ++ } while (--count > 0); ++ ++ if (CIRC_CNT(info->xmit.head, ++ info->xmit.tail, ++ UART_XMIT_SIZE) < WAKEUP_CHARS) ++ uart_event(info, EVT_WRITE_WAKEUP); ++ ++ if (info->xmit.head == info->xmit.tail) ++ it8712_stop_tx(info->port, 0); ++} ++ ++static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty) ++{ ++ unsigned int reg; ++ struct uart_info *info=(struct uart_info*)(port->iobase); ++ ++// printk("it8712 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_THRI); ++ UART_PUT_IER(port, reg); ++ it8712_tx_chars(info); ++} ++ ++static void it8712_modem_status(struct uart_info *info) ++{ ++ unsigned int status; ++ struct uart_icount *icount = &info->port->icount; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(info->port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DCD) { ++ icount->dcd++; ++#ifdef CONFIG_HARD_PPS ++ if ((info->flags & ASYNC_HARDPPS_CD) && ++ (status & UART_MSR_DCD_MSK)) ++ hardpps(); ++#endif ++ if (info->flags & ASYNC_CHECK_CD) { ++ if (status & UART_MSR_DCD) ++ wake_up_interruptible(&info->open_wait); ++ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (info->flags & ASYNC_CALLOUT_NOHUP))) { ++ if (info->tty) ++ tty_hangup(info->tty); ++ } ++ } ++ } ++ ++ if (status & UART_MSR_DDSR) ++ icount->dsr++; ++ ++ if (status & UART_MSR_DCTS) { ++ icount->cts++; ++ ++ if (info->flags & ASYNC_CTS_FLOW) { ++ status &= UART_MSR_CTS; ++ ++ if (info->tty->hw_stopped) { ++ if (status) { ++ info->tty->hw_stopped = 0; ++ info->ops->start_tx(info->port, 1, 0); ++ uart_event(info, EVT_WRITE_WAKEUP); ++ } ++ } else { ++ if (!status) { ++ info->tty->hw_stopped = 1; ++ info->ops->stop_tx(info->port, 0); ++ } ++ } ++ } ++ } ++ wake_up_interruptible(&info->delta_msr_wait); ++ ++} ++ ++static void it8712_int(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct uart_info *info = dev_id; ++ unsigned int status, pass_counter = 0; ++ ++ status = UART_GET_INT_STATUS(info->port); ++ do { ++// printk("it8712_int: status %x \n", status); ++ switch(status) ++ { ++ case UART_IIR_RDI: ++ case UART_IIR_RLSI: ++ case UART_IIR_RCTO: ++ it8712_rx_chars(info, regs); ++ break; ++ case UART_IIR_THRI: ++ it8712_tx_chars(info); ++ break; ++ case UART_IIR_MSI: ++ it8712_modem_status(info); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(info->port); ++ } while (status); ++} ++ ++static u_int it8712_tx_empty(struct uart_port *port) ++{ ++// printk("it8712 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int it8712_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("it8712 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void it8712_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("it8712 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SBC; ++ else ++ lcr &= ~UART_LCR_SBC; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (info->port->uartclk/(16 * baud)) ; ++ ++ return quot; ++} ++static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot) ++{ ++ u_int uart_mc=0, old_ier; ++ unsigned long flags; ++ ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ ++ ++ /* byte size and parity */ ++ switch (cflag & CSIZE) { ++ case CS5: uart_mc = UART_LCR_WLEN5; break; ++ case CS6: uart_mc = UART_LCR_WLEN6; break; ++ case CS7: uart_mc = UART_LCR_WLEN7; break; ++ default: uart_mc = UART_LCR_WLEN8; break; // CS8 ++ } ++ if (cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ port->read_status_mask = UART_LSR_OE; ++ if (iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ /* first, disable everything */ ++ save_flags(flags); cli(); ++ old_ier = UART_GET_IER(port); ++ ++ if ((port->flags & ASYNC_HARDPPS_CD) || ++ (cflag & CRTSCTS) || !(cflag & CLOCAL)) ++ old_ier |= UART_IER_MSI; ++ ++ /* Set baud rate */ ++ quot = quot / 13; ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++// UART_PUT_LCR(port, 0x07); // ???? it is wired ++ UART_PUT_MCR(port, 0x08); ++ UART_PUT_FCR(port, 0x01); ++ UART_PUT_IER(port, 0x05); ++ ++ restore_flags(flags); ++} ++ ++static int it8712_startup(struct uart_port *port, struct uart_info *info) ++{ ++ int retval; ++ unsigned int regs; ++ ++// printk("it8712 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ port->iobase=(u_int)info; ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info); ++ if (retval) ++ return retval; ++ ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs |= (IRQ_SERIRQ0_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_SERIRQ0_MASK); ++ *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK); ++ ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI)); ++ ++ return 0; ++} ++ ++static void it8712_shutdown(struct uart_port *port, struct uart_info *info) ++{ ++// printk("it8712 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, info); ++} ++ ++static const char *it8712_type(struct uart_port *port) ++{ ++ return port->type == PORT_IT8712 ? "IT8712" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void it8712_release_port(struct uart_port *port) ++{ ++// printk("it8712 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int it8712_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_it8712") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void it8712_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (it8712_request_port(port) == 0) ++ port->type = PORT_IT8712; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops it8712_pops = { ++ tx_empty: it8712_tx_empty, ++ set_mctrl: it8712_set_mctrl_null, ++ get_mctrl: it8712_get_mctrl, ++ stop_tx: it8712_stop_tx, ++ start_tx: it8712_start_tx, ++ stop_rx: it8712_stop_rx, ++ enable_ms: it8712_enable_ms, ++ break_ctl: it8712_break_ctl, ++ startup: it8712_startup, ++ shutdown: it8712_shutdown, ++ change_speed: it8712_change_speed, ++ type: it8712_type, ++ release_port: it8712_release_port, ++ request_port: it8712_request_port, ++ config_port: it8712_config_port, ++ verify_port: it8712_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port it8712_ports[UART_NR] = { ++ { ++ membase: (void *)0, ++ mapbase: 0, ++ iotype: SERIAL_IO_MEM, ++ irq: 0, ++ uartclk: UART_CLK/2, ++ fifosize: 16, ++ ops: &it8712_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_IT8712_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int it8712_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("it8712_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void it8712_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = it8712_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_THRE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++static kdev_t it8712_console_device(struct console *co) ++{ ++ return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index); ++} ++ ++static int it8712_console_wait_key(struct console *co) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = (it8712_ports + co->index); ++ unsigned int status; ++ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_RX_DATA(status)); ++ return UART_GET_CHAR(port); ++#else ++ return 0; ++#endif ++} ++ ++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++ printk("it8712 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PARITY) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_WLEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_WLEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_WLEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_WLEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = (port->uartclk / (16 *quot)); ++} ++ ++static int __init it8712_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 38400; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ int base, irq; ++ int i ; ++ ++// printk("it8712 console setup : \n"); ++ ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ base = IT8712_IO_BASE; ++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ it8712_ports[0].mapbase = base; ++ it8712_ports[0].membase = IO_ADDRESS(base); ++ it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET; ++ irq = LPCGetConfig(LDN_SERIAL1, 0x70); ++ it8712_ports[0].irq += irq; ++ ++ printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq); ++ ++ // setup LPC Host 'quiet mode' ++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ; ++ for(i=0;i<1000;i++) ; // delay ++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ it8712_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++static struct console it8712_console = { ++ name: SERIAL_IT8712_NAME, ++ write: it8712_console_write, ++#ifdef used_and_not_const_char_pointer ++ read: it8712_console_read, ++#endif ++ device: it8712_console_device, ++// wait_key: it8712_console_wait_key, ++ setup: it8712_console_setup, ++ flags: (CON_PRINTBUFFER|CON_ENABLED), ++ index: -1, ++}; ++ ++void __init it8712_console_init(void) ++{ ++ register_console(&it8712_console); ++} ++ ++#define IT8712_CONSOLE &it8712_console ++#else ++#define IT8712_CONSOLE NULL ++#endif ++ ++static struct uart_driver it8712_reg = { ++ owner: NULL, ++ normal_major: SERIAL_IT8712_MAJOR, ++ normal_name: SERIAL_IT8712_NAME, ++ normal_driver: &normal, ++ callout_major: CALLOUT_IT8712_MAJOR, ++ callout_name: CALLOUT_IT8712_NAME, ++ callout_driver: &callout, ++ table: it8712_table, ++ termios: it8712_termios, ++ termios_locked: it8712_termios_locked, ++ minor: SERIAL_IT8712_MINOR, ++ nr: UART_NR, ++#ifdef CONFIG_ARCH_SL2312 ++ port: it8712_ports, ++#endif ++ state: NULL, ++ cons: IT8712_CONSOLE, ++}; ++ ++static int __init it8712_init(void) ++{ ++// printk("serial_it8712: it871212_init \n"); ++ ++ return uart_register_driver(&it8712_reg); ++} ++ ++ ++__initcall(it8712_init); +Index: linux-2.6.23.16/drivers/serial/serial_sl2312.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/serial/serial_sl2312.c 2008-03-17 12:30:50.290536619 +0200 +@@ -0,0 +1,827 @@ ++/* ++ * linux/drivers/char/serial_uart00.c ++ * ++ * Driver for UART00 serial ports ++ * ++ * Based on drivers/char/serial_amba.c, by ARM Limited & ++ * Deep Blue Solutions Ltd. ++ * Copyright 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $ ++ * ++ */ ++#include <linux/module.h> ++ ++#include <linux/errno.h> ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/major.h> ++#include <linux/string.h> ++#include <linux/fcntl.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/circ_buf.h> ++#include <linux/serial.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <linux/serial_core.h> ++ ++#include <asm/system.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/bitops.h> ++#include <asm/sizes.h> ++#include <linux/spinlock.h> ++#include <linux/irq.h> ++ ++ ++#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++#define SUPPORT_SYSRQ ++#endif ++ ++#include <asm/arch/sl2312.h> ++#define UART_TYPE (volatile unsigned int*) ++#include <asm/arch/uart.h> ++#include <asm/arch/int_ctrl.h> ++ ++// #define DEBUG 1 ++#define UART_NR 1 ++ ++ ++#define SERIAL_SL2312_NAME "ttySL" ++#define SERIAL_SL2312_MAJOR 204 ++#define SERIAL_SL2312_MINOR 40 /* Temporary - will change in future */ ++#define SERIAL_SL2312_NR UART_NR ++#define UART_PORT_SIZE 0x50 ++ ++#define SL2312_NO_PORTS UART_NR ++#define SL2312_ISR_PASS_LIMIT 256 ++ ++/* ++ * Access macros for the SL2312 UARTs ++ */ ++#define UART_GET_INT_STATUS(p) (inl(UART_IIR((p)->membase)) & 0x0F) // interrupt identification ++#define UART_PUT_IER(p, c) outl(c,UART_IER((p)->membase)) // interrupt enable ++#define UART_GET_IER(p) inl(UART_IER((p)->membase)) ++#define UART_PUT_CHAR(p, c) outl(c,UART_THR((p)->membase)) // transmitter holding ++#define UART_GET_CHAR(p) inl(UART_RBR((p)->membase)) // receive buffer ++#define UART_GET_LSR(p) inl(UART_LSR((p)->membase)) // line status ++#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) // modem status ++#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) // modem control ++#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase)) ++#define UART_GET_LCR(p) inl(UART_LCR((p)->membase)) // mode control ++#define UART_PUT_LCR(p, c) outl(c,UART_LCR((p)->membase)) ++#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase)) ++#define UART_PUT_DIV_HI(p, c) outl(c,UART_DIV_HI((p)->membase)) ++#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase)) ++#define UART_PUT_DIV_LO(p, c) outl(c,UART_DIV_LO((p)->membase)) ++#define UART_PUT_MDR(p, c) outl(c,UART_MDR((p)->membase)) ++#define UART_RX_DATA(s) ((s) & UART_LSR_DR) ++#define UART_TX_READY(s) ((s) & UART_LSR_THRE) ++ ++ ++static void sl2312_stop_tx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 stop tx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_TE); ++ UART_PUT_IER(port, reg); ++} ++ ++static void sl2312_stop_rx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 stop rx : \n"); ++ reg = UART_GET_IER(port); ++ reg &= ~(UART_IER_DR); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void sl2312_enable_ms(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 enable ms : \n"); ++ ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_MS); ++ UART_PUT_IER(port, reg); ++ ++} ++ ++static void ++sl2312_rx_chars(struct uart_port *port) ++{ ++ struct tty_struct *tty = port->info->tty; ++ unsigned int status, mask, ch, flg, ignored = 0; ++ ++ ++ // printk("sl2312_rx_chars : \n"); ++ status = UART_GET_LSR(port); ++ while (UART_RX_DATA(status)) { ++ ++ /* ++ * We need to read rds before reading the ++ * character from the fifo ++ */ ++ ch = UART_GET_CHAR(port); ++ port->icount.rx++; ++ ++ //if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ if (tty && !tty_buffer_request_room(tty, 1)) ++ goto ignore_char; ++ ++ flg = TTY_NORMAL; ++ ++ /* ++ * Note that the error handling code is ++ * out of the main execution path ++ */ ++ ++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE)) ++ goto handle_error; ++ if (uart_handle_sysrq_char(port, ch)) ++ goto ignore_char; ++ ++ error_return: ++ //*tty->flip.flag_buf_ptr++ = flg; ++ //*tty->flip.char_buf_ptr++ = ch; ++ //tty->flip.count++; ++ tty_insert_flip_char(tty, ch, flg); ++ ignore_char: ++ status = UART_GET_LSR(port); ++ } // end of while ++out: ++ tty_flip_buffer_push(tty); ++ return; ++ ++handle_error: ++ if (status & UART_LSR_BI) { ++ status &= ~(UART_LSR_FE); ++ port->icount.brk++; ++ ++#ifdef SUPPORT_SYSRQ ++ if (uart_handle_break(port)) ++ goto ignore_char; ++#endif ++ } else if (status & UART_LSR_PE) ++ port->icount.parity++; ++ else if (status & UART_LSR_FE) ++ port->icount.frame++; ++ ++ if (status & UART_LSR_OE) ++ port->icount.overrun++; ++ ++ if (status & port->ignore_status_mask) { ++ if (++ignored > 100) ++ goto out; ++ goto ignore_char; ++ } ++ ++ mask = status & port->read_status_mask; ++ ++ if (mask & UART_LSR_BI) ++ flg = TTY_BREAK; ++ else if (mask & UART_LSR_PE) ++ flg = TTY_PARITY; ++ else if (mask & UART_LSR_FE) ++ flg = TTY_FRAME; ++ ++ if (status & UART_LSR_OE) { ++ /* ++ * CHECK: does overrun affect the current character? ++ * ASSUMPTION: it does not. ++ */ ++ //*tty->flip.flag_buf_ptr++ = flg; ++ //*tty->flip.char_buf_ptr++ = ch; ++ //tty->flip.count++; ++ ++ tty_insert_flip_char(tty, 0, TTY_BREAK); ++ ++ // if (tty->flip.count >= TTY_FLIPBUF_SIZE) ++ if (tty_buffer_request_room(tty, 1)) ++ goto ignore_char; ++ ch = 0; ++ flg = TTY_OVERRUN; ++ } ++#ifdef SUPPORT_SYSRQ ++ port->sysrq = 0; ++#endif ++ goto error_return; ++} ++ ++static void sl2312_tx_chars(struct uart_port *port) ++{ ++ struct circ_buf *xmit = &port->info->xmit; ++ int count; ++ ++ ++ if (port->x_char) { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, port->x_char); ++ port->icount.tx++; ++ port->x_char = 0; ++ ++ return; ++ } ++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { ++ sl2312_stop_tx(port); ++ ++ return; ++ } ++ ++ count = port->fifosize >> 1; ++ do { ++ while(!(UART_GET_LSR(port)&UART_LSR_THRE)); ++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ port->icount.tx++; ++ if (uart_circ_empty(xmit)) ++ break; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++ ++ if (uart_circ_empty(xmit)) ++ sl2312_stop_tx(port); ++ ++} ++ ++static void sl2312_start_tx(struct uart_port *port) ++{ ++ unsigned int reg; ++ ++// printk("sl2312 start tx : \n"); ++ reg = UART_GET_IER(port); ++ reg |= (UART_IER_TE); ++ UART_PUT_IER(port, reg); ++ ++ sl2312_tx_chars(port); ++} ++ ++static void sl2312_modem_status(struct uart_port *port) ++{ ++ unsigned int status; ++ ++// printk("it8712 modem status : \n"); ++ ++ status = UART_GET_MSR(port); ++ ++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR | ++ UART_MSR_TERI | UART_MSR_DDCD))) ++ return; ++ ++ if (status & UART_MSR_DDCD) ++ uart_handle_dcd_change(port, status & UART_MSR_DCD); ++ ++ if (status & UART_MSR_DDSR) ++ port->icount.dsr++; ++ ++ if (status & UART_MSR_DCTS) ++ uart_handle_cts_change(port, status & UART_MSR_CTS); ++ ++ wake_up_interruptible(&port->info->delta_msr_wait); ++ ++} ++ ++static irqreturn_t sl2312_int(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ unsigned int status, pass_counter = 0; ++ ++ status = UART_GET_INT_STATUS(port); ++ do { ++ switch(status) ++ { ++ case UART_IIR_DR: ++ case UART_IIR_RLS: ++ sl2312_rx_chars(port); ++ break; ++ case UART_IIR_TE: ++ sl2312_tx_chars(port); ++ break; ++ case UART_IIR_MODEM: ++ sl2312_modem_status(port); ++ break; ++ default: ++ break; ++ } ++ if (pass_counter++ > SL2312_ISR_PASS_LIMIT) ++ break; ++ ++ status = UART_GET_INT_STATUS(port); ++ } while (status); ++ ++ return IRQ_HANDLED; ++} ++ ++static u_int sl2312_tx_empty(struct uart_port *port) ++{ ++// printk("sl2312 tx empty : \n"); ++ ++ return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0); ++} ++ ++static u_int sl2312_get_mctrl(struct uart_port *port) ++{ ++ unsigned int result = 0; ++ unsigned int status; ++ ++// printk("sl2312 get mctrl : \n"); ++ ++ status = UART_GET_MSR(port); ++ if (status & UART_MSR_DCD) ++ result |= TIOCM_CAR; ++ if (status & UART_MSR_DSR) ++ result |= TIOCM_DSR; ++ if (status & UART_MSR_CTS) ++ result |= TIOCM_CTS; ++ if (status & UART_MSR_RI) ++ result |= TIOCM_RI; ++ ++ return result; ++} ++ ++static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl) ++{ ++} ++ ++static void sl2312_break_ctl(struct uart_port *port, int break_state) ++{ ++ unsigned int lcr; ++ ++// printk("sl2312 break ctl : \n"); ++ ++ lcr = UART_GET_LCR(port); ++ if (break_state == -1) ++ lcr |= UART_LCR_SETBREAK; ++ else ++ lcr &= ~UART_LCR_SETBREAK; ++ UART_PUT_LCR(port, lcr); ++} ++ ++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud) ++{ ++ u_int quot; ++ ++ /* Special case: B0 rate */ ++ if (!baud) ++ baud = 9600; ++ ++ quot = (port->uartclk / (16 * baud)-1) ; ++ ++ return quot; ++} ++ ++static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios, ++ struct ktermios *old) ++{ ++ unsigned int uart_mc, old_ier, baud, quot; ++ unsigned long flags; ++ ++ termios->c_cflag |= CREAD; ++#ifdef DEBUG ++ printk("it8712_set_cflag(0x%x) called\n", cflag); ++#endif ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ quot = (port->uartclk / (16 * baud)) ; ++ //uart_get_divisor(port, baud); ++ ++ /* byte size and parity */ ++ switch (termios->c_cflag & CSIZE) { ++ case CS5: ++ uart_mc = UART_LCR_LEN5; ++ break; ++ case CS6: ++ uart_mc = UART_LCR_LEN6; ++ break; ++ case CS7: ++ uart_mc = UART_LCR_LEN7; ++ break; ++ default: // CS8 ++ uart_mc = UART_LCR_LEN8; ++ break; ++ } ++ ++ if (termios->c_cflag & CSTOPB) ++ uart_mc|= UART_LCR_STOP; ++ if (termios->c_cflag & PARENB) { ++ uart_mc |= UART_LCR_EVEN; ++ if (!(termios->c_cflag & PARODD)) ++ uart_mc |= UART_LCR_ODD; ++ } ++ ++ spin_lock_irqsave(&port->lock, flags); ++ /* ++ * Update the per-port timeout ++ */ ++ uart_update_timeout(port, termios->c_cflag, baud); ++ port->read_status_mask = UART_LSR_OE; ++ if (termios->c_iflag & INPCK) ++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & (BRKINT | PARMRK)) ++ port->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ port->ignore_status_mask = 0; ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (termios->c_iflag & IGNBRK) { ++ port->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignoring parity and break indicators, ++ * ignore overruns to (for real raw support). ++ */ ++ if (termios->c_iflag & IGNPAR) ++ port->ignore_status_mask |= UART_LSR_OE; ++ } ++ ++ //save_flags(flags); cli(); ++ old_ier = UART_GET_IER(port); ++ ++ if(UART_ENABLE_MS(port, termios->c_cflag)) ++ old_ier |= UART_IER_MS; ++ ++ /* Set baud rate */ ++ UART_PUT_LCR(port, UART_LCR_DLAB); ++ UART_PUT_DIV_LO(port, (quot & 0xff)); ++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); ++ ++ UART_PUT_LCR(port, uart_mc); ++ UART_PUT_IER(port, old_ier); ++ ++ //restore_flags(flags); ++ spin_unlock_irqrestore(&port->lock, flags); ++} ++ ++ ++ ++static int sl2312_startup(struct uart_port *port) ++{ ++ int retval; ++ unsigned int regs; ++ ++// printk("sl2312 startup : \n"); ++ ++ /* ++ * Use iobase to store a pointer to info. We need this to start a ++ * transmission as the tranmittr interrupt is only generated on ++ * the transition to the idle state ++ */ ++ ++ /* ++ * Allocate the IRQ ++ */ ++ retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port); ++ if (retval) ++ return retval; ++ ++ /* setup interrupt controller */ ++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_UART_MASK); ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ regs &= ~(IRQ_UART_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs; ++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK); ++ ++ /* ++ * Finally, enable interrupts. Use the TII interrupt to minimise ++ * the number of interrupts generated. If higher performance is ++ * needed, consider using the TI interrupt with a suitable FIFO ++ * threshold ++ */ ++ UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE)); ++ ++ return 0; ++} ++ ++static void sl2312_shutdown(struct uart_port *port) ++{ ++// printk("sl2312 shutdown : \n"); ++ ++ /* ++ * disable all interrupts, disable the port ++ */ ++ UART_PUT_IER(port, 0x0); ++ ++ /* disable break condition and fifos */ ++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK)); ++ ++ /* ++ * Free the interrupt ++ */ ++ free_irq(port->irq, port); ++} ++ ++static const char *sl2312_type(struct uart_port *port) ++{ ++ return port->type == PORT_SL2312 ? "SL2312" : NULL; ++} ++ ++/* ++ * Release the memory region(s) being used by 'port' ++ */ ++static void sl2312_release_port(struct uart_port *port) ++{ ++// printk("sl2312 release port : \n"); ++ ++ release_mem_region(port->mapbase, UART_PORT_SIZE); ++} ++ ++/* ++ * Request the memory region(s) being used by 'port' ++ */ ++static int sl2312_request_port(struct uart_port *port) ++{ ++ return request_mem_region(port->mapbase, UART_PORT_SIZE, ++ "serial_sl2312") != NULL ? 0 : -EBUSY; ++} ++ ++/* ++ * Configure/autoconfigure the port. ++ */ ++static void sl2312_config_port(struct uart_port *port, int flags) ++{ ++ ++ if (flags & UART_CONFIG_TYPE) { ++ if (sl2312_request_port(port) == 0) ++ port->type = PORT_SL2312; ++ } ++} ++ ++/* ++ * verify the new serial_struct (for TIOCSSERIAL). ++ */ ++static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser) ++{ ++ int ret = 0; ++ ++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) ++ ret = -EINVAL; ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ ret = -EINVAL; ++ if (ser->baud_base < 9600) ++ ret = -EINVAL; ++ return ret; ++} ++ ++static struct uart_ops sl2312_pops = { ++ .tx_empty =sl2312_tx_empty, ++ .set_mctrl =sl2312_set_mctrl_null, ++ .get_mctrl =sl2312_get_mctrl, ++ .stop_tx =sl2312_stop_tx, ++ .start_tx =sl2312_start_tx, ++ .stop_rx =sl2312_stop_rx, ++ .enable_ms =sl2312_enable_ms, ++ .break_ctl =sl2312_break_ctl, ++ .startup =sl2312_startup, ++ .shutdown =sl2312_shutdown, ++ .set_termios =sl2312_set_termios, ++ .type =sl2312_type, ++ .release_port =sl2312_release_port, ++ .request_port =sl2312_request_port, ++ .config_port =sl2312_config_port, ++ .verify_port =sl2312_verify_port, ++}; ++ ++#ifdef CONFIG_ARCH_SL2312 ++ ++static struct uart_port sl2312_ports[UART_NR] = { ++ { ++ membase: (void *)IO_ADDRESS(SL2312_UART_BASE), ++ mapbase: SL2312_UART_BASE, ++ iotype: SERIAL_IO_MEM, ++ irq: IRQ_UART, ++ uartclk: UART_CLK, ++ fifosize: 16, ++ ops: &sl2312_pops, ++ flags: ASYNC_BOOT_AUTOCONF, ++ } ++}; ++ ++#endif ++ ++#ifdef CONFIG_SERIAL_SL2312_CONSOLE ++#ifdef used_and_not_const_char_pointer ++static int sl2312_console_read(struct uart_port *port, char *s, u_int count) ++{ ++ unsigned int status; ++ int c; ++#ifdef DEBUG ++ printk("sl2312_console_read() called\n"); ++#endif ++ ++ c = 0; ++ while (c < count) { ++ status = UART_GET_LSR(port); ++ if (UART_RX_DATA(status)) { ++ *s++ = UART_GET_CHAR(port); ++ c++; ++ } else { ++ // nothing more to get, return ++ return c; ++ } ++ } ++ // return the count ++ return c; ++} ++#endif ++static void sl2312_console_write(struct console *co, const char *s, unsigned count) ++{ ++#ifdef CONFIG_ARCH_SL2312 ++ struct uart_port *port = sl2312_ports + co->index; ++ unsigned int status, old_ies; ++ int i; ++ ++ /* ++ * First save the CR then disable the interrupts ++ */ ++ old_ies = UART_GET_IER(port); ++ UART_PUT_IER(port,0x0); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++) { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, s[i]); ++ if (s[i] == '\n') { ++ do { ++ status = UART_GET_LSR(port); ++ } while (!UART_TX_READY(status)); ++ UART_PUT_CHAR(port, '\r'); ++ } ++ } ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IES ++ */ ++ do { ++ status = UART_GET_LSR(port); ++ } while (!(status&UART_LSR_TE)); ++ UART_PUT_IER(port, old_ies); ++#endif ++} ++ ++#if 0 ++static void sl2312_console_device(struct console *co,int *index) ++{ ++ ++ struct uart_driver *p = co->data; ++ *index = co->index; ++ return p->tty_driver; ++ ++} ++#endif ++ ++static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) ++{ ++// printk("sl2312 console get options : \n"); ++ ++ u_int uart_mc, quot; ++ uart_mc= UART_GET_MCR(port); ++ ++ *parity = 'n'; ++ if (uart_mc & UART_LCR_PE) { ++ if (uart_mc & UART_LCR_EVEN) ++ *parity = 'e'; ++ else ++ *parity = 'o'; ++ } ++ ++ switch (uart_mc & UART_LCR_MSK){ ++ ++ case UART_LCR_LEN5: ++ *bits = 5; ++ break; ++ case UART_LCR_LEN6: ++ *bits = 6; ++ break; ++ case UART_LCR_LEN7: ++ *bits = 7; ++ break; ++ case UART_LCR_LEN8: ++ *bits = 8; ++ break; ++ } ++ UART_PUT_MCR(port,UART_LCR_DLAB); ++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); ++ UART_PUT_MCR(port,uart_mc); ++ *baud = port->uartclk / (16 *quot ); ++} ++ ++static int __init sl2312_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 19200; ++ int bits = 8; ++ int parity = 'n'; ++ int flow= 'n'; ++ ++ printk("sl2312 console setup : \n"); ++ ++#ifdef CONFIG_ARCH_SL2312 ++ /* ++ * Check whether an invalid uart number has been specified, and ++ * if so, search for the first available port that does have ++ * console support. ++ */ ++ port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co); ++#else ++ return -ENODEV; ++#endif ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ else ++ sl2312_console_get_options(port, &baud, &parity, &bits); ++ ++ return uart_set_options(port, co, baud, parity, bits, flow); ++} ++ ++extern struct uart_driver sl2312_reg; ++static struct console sl2312_console = { ++ .name = SERIAL_SL2312_NAME, ++ .write = sl2312_console_write, ++ .device = uart_console_device, ++// .device = sl2312_console_device, ++ .setup = sl2312_console_setup, ++// .flags = (CON_PRINTBUFFER|CON_ENABLED), ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &sl2312_reg, ++}; ++ ++static int __init sl2312_console_init(void) ++{ ++ register_console(&sl2312_console); ++ return 0; ++ ++} ++ ++console_initcall(sl2312_console_init); ++ ++#define SL2312_CONSOLE &sl2312_console ++#else ++#define SL2312_CONSOLE NULL ++#endif ++ ++// static ++struct uart_driver sl2312_reg = { ++ .owner = NULL, ++ .driver_name = SERIAL_SL2312_NAME, ++ .dev_name = SERIAL_SL2312_NAME, ++ .major = SERIAL_SL2312_MAJOR, ++ .minor = SERIAL_SL2312_MINOR, ++ .nr = UART_NR, ++ .cons = SL2312_CONSOLE, ++}; ++ ++static int __init sl2312_init(void) ++{ ++ int result; ++ //printk("serial_it8712: it871212_init \n"); ++ ++ result = uart_register_driver(&sl2312_reg); ++ if(result) ++ return result; ++ result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]); ++ ++ return result; ++} ++ ++ ++__initcall(sl2312_init); +Index: linux-2.6.23.16/include/linux/serial_core.h +=================================================================== +--- linux-2.6.23.16.orig/include/linux/serial_core.h 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/include/linux/serial_core.h 2008-03-15 17:59:53.568330991 +0200 +@@ -147,6 +147,10 @@ + #define PORT_SB1250_DUART 77 + + ++/* Storlink Soc */ ++#define PORT_SL2312 72 ++#define PORT_IT8712 73 ++ + #ifdef __KERNEL__ + + #include <linux/compiler.h> +Index: linux-2.6.23.16/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-17 12:19:43.252524398 +0200 +@@ -70,6 +70,16 @@ + obj-$(CONFIG_APPLICOM) += applicom.o + obj-$(CONFIG_SONYPI) += sonypi.o + obj-$(CONFIG_RTC) += rtc.o ++ ++### for Storlink SoC ### ++obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o ++obj-$(CONFIG_IT8712_GPIO) += it8712_gpio.o ++obj-$(CONFIG_GEMINI_GPIO) += gemini_gpio.o ++obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o ++obj-$(CONFIG_GEMINI_CIR) += gemini_cir.o ++obj-$(CONFIG_GEMINI_I2S) += gemini_i2s.o ++obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o ++ + obj-$(CONFIG_HPET) += hpet.o + obj-$(CONFIG_GEN_RTC) += genrtc.o + obj-$(CONFIG_EFI_RTC) += efirtc.o +Index: linux-2.6.23.16/drivers/serial/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/serial/Kconfig 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/serial/Kconfig 2008-03-15 17:59:53.568330991 +0200 +@@ -280,6 +280,56 @@ + + comment "Non-8250 serial port support" + ++config SERIAL_SL2312 ++ bool "SL2312 serial port (sl2312) support" ++ depends on ARCH_SL2312 ++ select SERIAL_CORE ++ select SERIAL_SL2312_CONSOLE ++ help ++ Say Y here if you want to use the hard logic uart on SWORD. This ++ driver also supports soft logic implentations of this uart core. ++ ++config SERIAL_SL2312_CONSOLE ++ bool "Support for console on SL2312 serial port" ++ depends on SERIAL_SL2312 ++ select SERIAL_CORE_CONSOLE ++ help ++ Say Y here if you want to support a serial console on an SWORD ++ hard logic uart or uart00 IP core. ++ ++ Even if you say Y here, the currently visible virtual console ++ (/dev/tty0) will still be used as the system console by default, but ++ you can alter that using a kernel command line option such as ++ "console=ttySL0". (Try "man bootparam" or see the documentation of ++ your boot loader (lilo or loadlin) about how to pass options to the ++ kernel at boot time.) ++ ++ ++config SERIAL_IT8712 ++ bool "Sl2312 serial port(IT8712) support" ++ depends on ARM && ARCH_SL2312 && SL2312_LPC ++ select SERIAL_CORE ++ select SERIAL_IT8712_CONSOLE ++ help ++ Say Y here if you want to use the hard logic uart on Excalibur. This ++ driver also supports soft logic implentations of this uart core. ++ ++config SERIAL_IT8712_CONSOLE ++ bool "Support for console on Sword serial port(IT8712)" ++ depends on SERIAL_IT8712 ++ select SERIAL_CORE_CONSOLE ++ help ++ Say Y here if you want to support a serial console on an Excalibur ++ hard logic uart or uart00 IP core. ++ ++ Even if you say Y here, the currently visible virtual console ++ (/dev/tty0) will still be used as the system console by default, but ++ you can alter that using a kernel command line option such as ++ "console=ttySI0". (Try "man bootparam" or see the documentation of ++ your boot loader (lilo or loadlin) about how to pass options to the ++ kernel at boot time.) ++ ++ + config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) +Index: linux-2.6.23.16/drivers/serial/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/serial/Makefile 2008-03-15 17:59:22.566564448 +0200 ++++ linux-2.6.23.16/drivers/serial/Makefile 2008-03-15 17:59:53.568330991 +0200 +@@ -62,5 +62,7 @@ + obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o + obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o + obj-$(CONFIG_SERIAL_NETX) += netx-serial.o ++obj-$(CONFIG_SERIAL_IT8712) += it8712.o ++obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o + obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o + obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o diff --git a/target/linux/storm/patches/1100-gpio.patch b/target/linux/storm/patches/1100-gpio.patch new file mode 100644 index 0000000000..d2ea7279b0 --- /dev/null +++ b/target/linux/storm/patches/1100-gpio.patch @@ -0,0 +1,390 @@ +Index: linux-2.6.23.16/drivers/char/gemini_gpio_dev.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/char/gemini_gpio_dev.c 2008-03-15 17:05:28.382258620 +0200 +@@ -0,0 +1,356 @@ ++/* ++ * GPIO driver for Gemini board ++ * Provides /dev/gpio ++ */ ++ ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/proc_fs.h> ++#include <linux/fcntl.h> ++#include <linux/miscdevice.h> ++#include <asm/uaccess.h> /* copy_to_user, copy_from_user */ ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/arch/sl2312.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/gemini_gpio.h> ++ ++#define GEMINI_GPIO_BASE1 IO_ADDRESS(SL2312_GPIO_BASE) ++#define GEMINI_GPIO_BASE2 IO_ADDRESS(SL2312_GPIO_BASE1) ++ ++#define GPIO_SET 2 ++#define MAX_GPIO_LINE 32*GPIO_SET ++ ++wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE]; ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0C, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_PULL_ENABLE = 0x18, ++ GPIO_PULL_TYPE = 0x1C, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAW_STATUS = 0x24, ++ GPIO_INT_MASK_STATUS = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIG = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLAR = 0x3C ++}; ++ ++unsigned int regist_gpio_int0=0,regist_gpio_int1=0; ++ ++/* defines a specific GPIO bit number and state */ ++struct gpio_bit { ++ unsigned char bit; ++ unsigned char state; ++}; ++ ++#define GPIO_MAJOR 10 ++#define GPIO_MINOR 127 ++ ++/* ++ * ioctl calls that are permitted to the /dev/gpio interface ++ */ ++#define GPIO_GET_BIT 0x0000001 ++#define GPIO_SET_BIT 0x0000002 ++#define GPIO_GET_CONFIG 0x0000003 ++#define GPIO_SET_CONFIG 0x0000004 ++ ++//#define GPIO_CONFIG_OUT 1 ++//#define GPIO_CONFIG_IN 2 ++ ++ ++ ++#define DEVICE_NAME "gpio" ++ ++//#define DEBUG ++ ++/* ++ * GPIO interface ++ */ ++ ++/* /dev/gpio */ ++static int gpio_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg); ++ ++/* /proc/driver/gpio */ ++static int gpio_read_proc(char *page, char **start, off_t off, ++ int count, int *eof, void *data); ++ ++static unsigned char gpio_status; /* bitmapped status byte. */ ++ ++/* functions for set/get gpio lines on storlink cpu */ ++ ++void gpio_line_get(unsigned char pin, u32 * data) ++{ ++ unsigned int set = pin >>5; // each GPIO set has 32 pins ++ unsigned int status,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN; ++ status = readl(addr); ++#ifdef DEBUG ++ printk("status = %08X, pin = %d, set = %d\n", status, pin, set); ++#endif ++ if (set) ++ *data = (status&(1<<(pin-32)))?1:0; ++ else ++ *data = (status&(1<<pin))?1:0; ++} ++ ++void gpio_line_set(unsigned char pin, u32 high) ++{ ++ unsigned char set = pin >>5; // each GPIO set has 32 pins ++ unsigned int status=0,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR); ++ ++ status &= ~(1 << (pin %32)); ++ status |= (1 << (pin % 32)); ++ writel(status,addr); ++} ++ ++/* ++ * pin = [0..63] ++ * mode = ++ * 1 -- OUT ++ * 2 -- IN ++ */ ++void gpio_line_config(unsigned char pin, unsigned char mode) ++{ ++ unsigned char set = pin >>5; // each GPIO set has 32 pins ++ unsigned int status,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 1) ++ status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */ ++ ++ writel(status,addr); ++#if 0 ++ /* enable pullup-high if mode is input */ ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 2) /* input */ ++ status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */ ++ ++ writel(status,addr); ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 2) /* input */ ++ status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */ ++ ++ writel(status,addr); ++#endif ++} ++ ++#define GPIO_IS_OPEN 0x01 /* means /dev/gpio is in use */ ++ ++/* ++ * Now all the various file operations that we export. ++ */ ++static int gpio_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct gpio_bit bit; ++ u32 val; ++ ++ if (copy_from_user(&bit, (struct gpio_bit *)arg, ++ sizeof(bit))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ ++ case GPIO_GET_BIT: ++ gpio_line_get(bit.bit, &val); ++ bit.state = val; ++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0; ++ case GPIO_SET_BIT: ++ val = bit.state; ++ gpio_line_set(bit.bit, val); ++ return 0; ++ case GPIO_GET_CONFIG: ++ // gpio_line_config(bit.bit, bit.state); ++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0; ++ case GPIO_SET_CONFIG: ++ val = bit.state; ++ gpio_line_config(bit.bit, bit.state); ++ return 0; ++ } ++ return -EINVAL; ++} ++ ++ ++static int gpio_open(struct inode *inode, struct file *file) ++{ ++ if (gpio_status & GPIO_IS_OPEN) ++ return -EBUSY; ++ ++ gpio_status |= GPIO_IS_OPEN; ++ return 0; ++} ++ ++ ++static int gpio_release(struct inode *inode, struct file *file) ++{ ++ /* ++ * Turn off all interrupts once the device is no longer ++ * in use and clear the data. ++ */ ++ ++ gpio_status &= ~GPIO_IS_OPEN; ++ return 0; ++} ++ ++ ++/* ++ * The various file operations we support. ++ */ ++ ++static struct file_operations gpio_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = gpio_ioctl, ++ .open = gpio_open, ++ .release = gpio_release, ++}; ++ ++static struct miscdevice gpio_dev = ++{ ++ .minor = GPIO_MINOR, ++ .name = "gpio", ++ .fops = &gpio_fops, ++}; ++ ++ ++ ++ ++#ifdef CONFIG_PROC_FS ++static struct proc_dir_entry *dir; ++ ++/* ++ * Info exported via "/proc/driver/gpio". ++ */ ++static int gpio_get_status(char *buf) ++{ ++ char *p = buf; ++ u32 val = 0; ++ int i; ++ int bit; ++#ifdef DEBUG ++ u32 addr; ++ ++ for (i = 0; i < 0x20; i+=4 ) { ++ addr = IO_ADDRESS(SL2312_GPIO_BASE) + i; ++ val = readl(addr); ++ p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val ); ++ } ++ for (i = 0; i < 0x20; i+=4 ) { ++ addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i; ++ val = readl(addr); ++ p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val ); ++ } ++#endif ++ ++ for (i = 0; i < 32; i++) { ++ gpio_line_get(i, &bit); ++ if (bit) ++ val |= (1 << i); ++ } ++ p += sprintf(p, "gpio0\t: 0x%08x\n", val); ++ ++ val = 0; ++ for (i = 32; i < 64; i++) { ++ gpio_line_get(i, &bit); ++ if (bit) ++ val |= (1 << i); ++ } ++ p += sprintf(p, "gpio1\t: 0x%08x\n", val); ++ ++ return p - buf; ++} ++ ++ ++/* /proc/driver/gpio read op ++ */ ++static int gpio_read_proc(char *page, char **start, off_t off, ++ int count, int *eof, void *data) ++{ ++ int len = gpio_get_status (page); ++ ++ if (len <= off+count) ++ *eof = 1; ++ *start = page + off; ++ len -= off; ++ if ( len > count ) ++ len = count; ++ if ( len < 0 ) ++ len = 0; ++ return len; ++} ++#endif /* CONFIG_PROC_FS */ ++ ++ ++static int __init gpio_init_module(void) ++{ ++ int retval; ++#ifdef CONFIG_PROC_FS ++ struct proc_dir_entry *res; ++#endif ++ ++ /* register /dev/gpio file ops */ ++ //retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops); ++ retval = misc_register(&gpio_dev); ++ if(retval < 0) ++ return retval; ++ ++#ifdef CONFIG_PROC_FS ++ dir = proc_mkdir("driver/gpio", NULL); ++ if (!dir) { ++ misc_deregister(&gpio_dev); ++ return -ENOMEM; ++ } ++ /* register /proc/driver/gpio */ ++ res = create_proc_entry("info", 0644, dir); ++ if (res) { ++ res->read_proc= gpio_read_proc; ++ } else { ++ misc_deregister(&gpio_dev); ++ return -ENOMEM; ++ } ++#endif ++ ++ printk("%s: GPIO driver loaded\n", __FILE__); ++ ++ return 0; ++} ++ ++static void __exit gpio_cleanup_module(void) ++{ ++ remove_proc_entry ("info", dir); ++ misc_deregister(&gpio_dev); ++ ++ printk("%s: GPIO driver unloaded\n", __FILE__); ++} ++ ++module_init(gpio_init_module); ++module_exit(gpio_cleanup_module); ++ ++MODULE_AUTHOR("Jonas Majauskas"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23.16/drivers/char/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Kconfig 2008-03-13 17:45:54.000221290 +0200 ++++ linux-2.6.23.16/drivers/char/Kconfig 2008-03-15 17:05:09.381175866 +0200 +@@ -1064,5 +1064,12 @@ + + source "drivers/s390/char/Kconfig" + ++config GEMINI_GPIO_DEV ++ tristate "GPIO driver for Gemini board (provides /dev/gpio)" ++ depends on ARCH_SL2312 ++ default n ++ help ++ GPIO driver for Gemini boards - SL3512, SL3516. ++ + endmenu + +Index: linux-2.6.23.16/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:04:35.879266660 +0200 ++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-15 17:05:09.381175866 +0200 +@@ -115,6 +115,7 @@ + + obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o + obj-$(CONFIG_TCG_TPM) += tpm/ ++obj-$(CONFIG_GEMINI_GPIO_DEV) += gemini_gpio_dev.o + + obj-$(CONFIG_PS3_FLASH) += ps3flash.o + diff --git a/toolchain/Config.in b/toolchain/Config.in index c73e092909..a6b0683498 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -85,6 +85,7 @@ config TARGET_OPTIMIZATION default "-Os -pipe -march=i486 -funit-at-a-time" if TARGET_rdc default "-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time" if mipsel || mips default "-Os -pipe -march=armv5te -mtune=xscale -funit-at-a-time" if TARGET_ixp4xx || TARGET_iop32x || TARGET_pxa + default "-Os -pipe -march=armv4t -mtune=arm9tdmi -funit-at-a-time" if TARGET_storm default "-Os -pipe -funit-at-a-time" help Optimizations to use when building for the target host. diff --git a/toolchain/uClibc/config/arm.storm b/toolchain/uClibc/config/arm.storm new file mode 100644 index 0000000000..ee109d7851 --- /dev/null +++ b/toolchain/uClibc/config/arm.storm @@ -0,0 +1,210 @@ +# +# Automatically generated make config: don't edit +# +# TARGET_alpha is not set +TARGET_arm=y +# TARGET_avr32 is not set +# TARGET_bfin is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="arm" +FORCE_OPTIONS_FOR_ARCH=y +# CONFIG_ARM_OABI is not set +CONFIG_ARM_EABI=y +USE_BX=y +# CONFIG_GENERIC_ARM is not set +# CONFIG_ARM610 is not set +# CONFIG_ARM710 is not set +# CONFIG_ARM7TDMI is not set +# CONFIG_ARM720T is not set +CONFIG_ARM920T=y +# CONFIG_ARM922T is not set +# CONFIG_ARM926T is not set +# CONFIG_ARM10T is not set +# CONFIG_ARM1136JF_S is not set +# CONFIG_ARM1176JZ_S is not set +# CONFIG_ARM1176JZF_S is not set +# CONFIG_ARM_SA110 is not set +# CONFIG_ARM_SA1100 is not set +# CONFIG_ARM_XSCALE is not set +# CONFIG_ARM_IWMMXT is not set +ARCH_ANY_ENDIAN=y +# ARCH_WANTS_BIG_ENDIAN is not set +ARCH_WANTS_LITTLE_ENDIAN=y +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +UCLIBC_HAS_FPU=y +UCLIBC_HAS_SOFT_FLOAT=y +DO_C99_MATH=y +KERNEL_SOURCE="./toolchain_build_arm/linux" +KERNEL_HEADERS="./toolchain_build_arm/linux/include" +HAVE_DOT_CONFIG=y + +# +# General Library Settings +# +# HAVE_NO_PIC is not set +DOPIC=y +# HAVE_NO_SHARED is not set +HAVE_SHARED=y +# ARCH_HAS_NO_LDSO is not set +BUILD_UCLIBC_LDSO=y +# FORCE_SHAREABLE_TEXT_SEGMENTS is not set +LDSO_LDD_SUPPORT=y +LDSO_CACHE_SUPPORT=y +# LDSO_PRELOAD_FILE_SUPPORT is not set +LDSO_BASE_FILENAME="ld.so" +LDSO_RUNPATH=y +# DL_FINI_CRT_COMPAT is not set +UCLIBC_CTOR_DTOR=y +# HAS_NO_THREADS is not set +UCLIBC_HAS_THREADS=y +# PTHREADS_DEBUG_SUPPORT is not set +UCLIBC_HAS_LFS=y +LINUXTHREADS_OLD=y +# UCLIBC_STATIC_LDCONFIG is not set +# MALLOC is not set +# MALLOC_SIMPLE is not set +MALLOC_STANDARD=y +MALLOC_GLIBC_COMPAT=y +UCLIBC_DYNAMIC_ATEXIT=y +COMPAT_ATEXIT=y +# UCLIBC_SUSV3_LEGACY is not set +UCLIBC_SUSV3_LEGACY_MACROS=y +UCLIBC_HAS_SHADOW=y +UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y +UCLIBC_HAS___PROGNAME=y +# UNIX98PTY_ONLY is not set +ASSUME_DEVPTS=y +UCLIBC_HAS_TM_EXTENSIONS=y +UCLIBC_HAS_TZ_CACHING=y +UCLIBC_HAS_TZ_FILE=y +UCLIBC_HAS_TZ_FILE_READ_MANY=y +UCLIBC_TZ_FILE_PATH="/etc/TZ" + +# +# Advanced Library Settings +# +UCLIBC_PWD_BUFFER_SIZE=256 +UCLIBC_GRP_BUFFER_SIZE=256 + +# +# Networking Support +# +UCLIBC_HAS_IPV6=y +UCLIBC_HAS_RPC=y +UCLIBC_HAS_FULL_RPC=y +# UCLIBC_HAS_REENTRANT_RPC is not set +# UCLIBC_USE_NETLINK is not set +UCLIBC_HAS_BSD_RES_CLOSE=y + +# +# String and Stdio Support +# +UCLIBC_HAS_STRING_GENERIC_OPT=y +UCLIBC_HAS_STRING_ARCH_OPT=y +UCLIBC_HAS_CTYPE_TABLES=y +UCLIBC_HAS_CTYPE_SIGNED=y +# UCLIBC_HAS_CTYPE_UNSAFE is not set +UCLIBC_HAS_CTYPE_CHECKED=y +# UCLIBC_HAS_CTYPE_ENFORCED is not set +UCLIBC_HAS_WCHAR=y +# UCLIBC_HAS_LOCALE is not set +UCLIBC_HAS_HEXADECIMAL_FLOATS=y +UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y +UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 +UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y +# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set +# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set +UCLIBC_HAS_STDIO_BUFSIZ_4096=y +# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set +UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set +UCLIBC_HAS_STDIO_GETC_MACRO=y +UCLIBC_HAS_STDIO_PUTC_MACRO=y +UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y +# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set +UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y +UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y +UCLIBC_HAS_PRINTF_M_SPEC=y +UCLIBC_HAS_ERRNO_MESSAGES=y +# UCLIBC_HAS_SYS_ERRLIST is not set +UCLIBC_HAS_SIGNUM_MESSAGES=y +# UCLIBC_HAS_SYS_SIGLIST is not set +UCLIBC_HAS_GNU_GETOPT=y +UCLIBC_HAS_GNU_GETSUBOPT=y + +# +# Big and Tall +# +UCLIBC_HAS_REGEX=y +UCLIBC_HAS_REGEX_OLD=y +UCLIBC_HAS_FNMATCH=y +UCLIBC_HAS_FNMATCH_OLD=y +UCLIBC_HAS_WORDEXP=y +UCLIBC_HAS_FTW=y +UCLIBC_HAS_GLOB=y +UCLIBC_HAS_GNU_GLOB=y + +# +# Library Installation Options +# +SHARED_LIB_LOADER_PREFIX="/lib" +RUNTIME_PREFIX="/" +DEVEL_PREFIX="/usr/" + +# +# Security options +# +# UCLIBC_BUILD_PIE is not set +# UCLIBC_HAS_ARC4RANDOM is not set +# HAVE_NO_SSP is not set +# UCLIBC_HAS_SSP is not set +UCLIBC_BUILD_RELRO=y +# UCLIBC_BUILD_NOW is not set +UCLIBC_BUILD_NOEXECSTACK=y + +# +# uClibc development/debugging options +# +CROSS_COMPILER_PREFIX="" +UCLIBC_EXTRA_CFLAGS="" +# DODEBUG is not set +# DODEBUG_PT is not set +DOSTRIP=y +# DOASSERTS is not set +# SUPPORT_LD_DEBUG is not set +# SUPPORT_LD_DEBUG_EARLY is not set +# UCLIBC_MALLOC_DEBUGGING is not set +WARNINGS="-Wall" +# EXTRA_WARNINGS is not set +# DOMULTI is not set +# UCLIBC_MJN3_ONLY is not set |